{"title":"Bow Rollers \u0026 Anchor Mounts","description":null,"products":[{"product_id":"sierra-18-2303-anchor-screw-set-replaces-mercruiser-10-20518-fits-1r-mr-alpha-gen-ii-bravo-drives-pkg-of-25","title":"Sierra Anchor Screw Set 18-2303, Replaces 10-20518, for MerCruiser #1R, MR, Alpha, Alpha I, Gen II \u0026 Bravo Drives, Pack of 25","description":"\u003cp\u003eThe Sierra Anchor Screw Set, part number 18-2303, is a package of 25 machine screws designed as anchor screws for MerCruiser I\/O drive systems, covering the #1R, MR, Alpha, Alpha I, Gen II, and Bravo drive models. These fully threaded machine screws are used to secure components within the MerCruiser drive assembly and are supplied as a direct replacement for OEM part number 10-20518, letting you restore original fastening specifications during a drive service or rebuild.\u003c\/p\u003e\u003cp\u003eEach screw set arrives sized at 0.39 x 0.39 x 0.39 inches per unit, with the full package of 25 screws weighing 0.17 pounds. Being fully threaded, the screws are ready to install without additional machining, making this set convenient to have on hand for routine MerCruiser drive maintenance, rebuilds, or when replacing lost or damaged anchor screws. Ordering the correct Sierra part number ensures fitment consistency across the covered MerCruiser drive lineup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2303\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Anchor Screw Set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 25 screws per package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e Machine Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Coverage:\u003c\/strong\u003e Fully Threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.17 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282101206\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMerCruiser I\/O drive systems: #1R, MR, Alpha, Alpha I, Gen II, and Bravo\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e10-20518\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-2303 Anchor Screw Set used for?\u003c\/strong\u003e The Sierra 18-2303 Anchor Screw Set is a package of 25 machine screws used as anchor screws in MerCruiser I\/O drive systems, covering the #1R, MR, Alpha, Alpha I, Gen II, and Bravo drive models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich MerCruiser drives does part number 18-2303 fit?\u003c\/strong\u003e Part number 18-2303 is designed for MerCruiser #1R, MR, Alpha, Alpha I, Gen II, and Bravo drive systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does the 18-2303 Anchor Screw Set replace?\u003c\/strong\u003e The Sierra 18-2303 Anchor Screw Set replaces OEM part number 10-20518.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many screws come in the 18-2303 package?\u003c\/strong\u003e Each package of the Sierra 18-2303 Anchor Screw Set contains 25 screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of each screw in the 18-2303 set?\u003c\/strong\u003e Each screw in the 18-2303 Anchor Screw Set measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-2303 Anchor Screw Set weigh?\u003c\/strong\u003e The full package of the Sierra 18-2303 Anchor Screw Set weighs 0.17 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the screws in the 18-2303 set fully threaded?\u003c\/strong\u003e Yes, the screws in the Sierra 18-2303 Anchor Screw Set are fully threaded machine screws, ready to install without additional preparation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2303 Anchor Screw Set genuine Sierra hardware?\u003c\/strong\u003e Yes, part number 18-2303 is a Sierra-manufactured Anchor Screw Set, sold as a direct replacement for the OEM screws used in the covered MerCruiser drive systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener type is included in the 18-2303 set?\u003c\/strong\u003e The Sierra 18-2303 set includes machine screws, specifically anchor screws for MerCruiser drive applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-2303 Anchor Screw Set be used for a MerCruiser drive rebuild?\u003c\/strong\u003e Yes, the 25-piece Sierra 18-2303 Anchor Screw Set is suited for MerCruiser drive maintenance and rebuild work on the #1R, MR, Alpha, Alpha I, Gen II, and Bravo models, since it replaces OEM part 10-20518.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988105769179,"sku":"SIE-18-2303","price":1.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-2303__34549.1737828430.500.750.jpg?v=1785188452"},{"product_id":"sea-dog-bow-eye-3-8-x-5-chrome-zinc-head-galvanized-shaft-2-500-lb-breaking-strength-mpn-079135-1","title":"Sea-Dog Bow Eye 079135-1, 3\/8 Inch-16 UNC, Chrome Zinc Head, Galvanized Shaft, 2,500 lb Breaking Strength","description":"\u003cp\u003eThe Sea-Dog Bow Eye 079135-1 is a tie-down fitting used to add or replace a mounting point on a boat's bow or stern. It features a die cast zinc head with a chrome plated finish paired with a galvanized shaft, giving it a bright, durable exterior with corrosion-resistant plating. The shaft threads with a 3\/8 inch-16 UNC thread pattern, and a mounting nut and washer are included so the bow eye is ready to install without sourcing separate hardware.\u003c\/p\u003e\u003cp\u003eThis bow eye carries a rated breaking strength of 2,500 pounds, making it suitable for standard bow or stern tie-down duty such as trailer winch hook-up or dock line attachment points. It is recommended for fresh water use. Overall mounting dimensions run 4-5\/8 inches and 6-5\/8 inches across the reference points shown in the manufacturer's spec table, with a 15\/16 inch and 1-13\/16 inch reference dimension and a 3\/8 inch NC thread diameter. The part weighs 0.386 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 079135-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bow Eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Zinc (Head), Galvanized Steel (Shaft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome Plated (Head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/8 Inch-16 UNC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Class:\u003c\/strong\u003e 2B, Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking Strength:\u003c\/strong\u003e 2,500 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.386 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (Thread Diameter):\u003c\/strong\u003e 3\/8 Inch NC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 4-5\/8 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 15\/16 Inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 6-5\/8 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 1-13\/16 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Nut and Washer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Water Type:\u003c\/strong\u003e Fresh Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514079020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the breaking strength of the Sea-Dog Bow Eye 079135-1?\u003c\/strong\u003e This bow eye is rated for a breaking strength of 2,500 pounds, making it suitable for standard bow or stern tie-down use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does the 079135-1 bow eye use?\u003c\/strong\u003e The Sea-Dog 079135-1 uses a 3\/8 inch-16 UNC thread, Class 2B, right hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the bow eye come with mounting hardware?\u003c\/strong\u003e Yes, a nut and washer are included with the 079135-1 bow eye so it can be installed without buying separate fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog Bow Eye 079135-1 made from?\u003c\/strong\u003e It has a die cast zinc head with a chrome plated finish and a galvanized steel shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bow eye rated for saltwater use?\u003c\/strong\u003e No, the 079135-1 bow eye is recommended for fresh water use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 079135-1 bow eye?\u003c\/strong\u003e Per the manufacturer's dimension chart, this bow eye measures 4-5\/8 inches and 6-5\/8 inches across its reference points, with a 15\/16 inch and 1-13\/16 inch reference dimension and a 3\/8 inch NC thread diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog Bow Eye 079135-1 weigh?\u003c\/strong\u003e It weighs 0.386 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this bow eye?\u003c\/strong\u003e The UPC for Sea-Dog part number 079135-1 is 035514079020.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this bow eye used for?\u003c\/strong\u003e The 079135-1 is used to add or replace a tie-down point on a boat's bow or stern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 079135-1 different from the smaller Sea-Dog bow eye 079133-1?\u003c\/strong\u003e The 079135-1 has larger mounting dimensions (4-5\/8 inches and 6-5\/8 inches) than the 079133-1 (2-9\/16 inches and 4-3\/4 inches), though both share the same 3\/8 inch NC thread and 2,500 pound breaking strength rating; they are separate part numbers, so match the dimension needed for your mounting location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the head of the 079135-1 bow eye have?\u003c\/strong\u003e The head is die cast zinc with a chrome plated finish, while the shaft is galvanized.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 079135-1 sold as a single unit?\u003c\/strong\u003e Yes, this listing is for one Sea-Dog Bow Eye, part number 079135-1, complete with mounting nut and washer.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544860379,"sku":"S-D-079135-1","price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7491.jpg?v=1784421940"},{"product_id":"sea-dog-twin-shank-bow-eye-079233-1-6-000-lb-chrome-plated-boat-bow-tie-down-comparable-to-perko-1235-5-16-18-unc","title":"Sea-Dog Twin Shank Bow Eye 079233-1, 2-15\/16 Inch Shaft, Chrome Plated","description":"\u003cp\u003eThe Sea-Dog Twin Shank Bow Eye (part number 079233-1) is a bow-mounted tie-down fitting for securing your boat during trailering, winching, or dockside tie-down. It is built with a die cast zinc chrome plated head and chrome steel shafts, giving it a bright chrome finish along with corrosion resistance for the head casting. A U-bolt surrounds the cast eye for added strength, forming the twin-shank design that gives this bow eye its name and distributes tie-down loads across two mounting points instead of one.\u003c\/p\u003e\u003cp\u003eThis bow eye carries a rated breaking strength of 6,000 pounds, making it suitable for securing a boat under winch or trailer tension. The threads are 5\/16 inch-18 UNC, and mounting nuts and washers are included, so no separate hardware purchase is needed for installation. Sea-Dog recommends this bow eye for fresh water use. It is comparable to the Perko #1235 bow eye, making it a straightforward option for boat owners replacing that fitting or outfitting a bow with twin-shank hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 079233-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Twin Shank Bow Eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial - Head:\u003c\/strong\u003e Die cast zinc, chrome plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial - Shafts:\u003c\/strong\u003e Chrome steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 5\/16 inch-18 UNC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Length (B):\u003c\/strong\u003e 2-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 5-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking Strength:\u003c\/strong\u003e 6,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.592 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Nuts and washers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Fresh water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514079075\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit; not restricted to a specific boat make or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 079233-1 Twin Shank Bow Eye used for?\u003c\/strong\u003e It serves as a tie-down point on a boat's bow, letting you secure the boat with a winch line or tie-down strap. The twin-shank design, with a U-bolt surrounding the cast eye, gives it added strength over a single-shank bow eye.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the breaking strength of this bow eye?\u003c\/strong\u003e The Sea-Dog 079233-1 has a rated breaking strength of 6,000 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 079233-1 bow eye made from?\u003c\/strong\u003e The head is die cast zinc with a chrome plated finish, and the shafts are chrome steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the shaft on this bow eye?\u003c\/strong\u003e The shaft measures 2-15\/16 inches, which is the dimension referenced in the product name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does the 079233-1 bow eye use?\u003c\/strong\u003e It uses 5\/16 inch-18 UNC threads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting nuts and washers included with this bow eye?\u003c\/strong\u003e Yes, nuts and washers are included with the Sea-Dog 079233-1 Twin Shank Bow Eye, so no separate hardware is needed to install it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bow eye rated for salt water use?\u003c\/strong\u003e Sea-Dog recommends the 079233-1 Twin Shank Bow Eye for fresh water use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 079233-1 comparable to any other bow eye brands?\u003c\/strong\u003e It is comparable to the Perko #1235 bow eye, making it a suitable option when replacing that fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this bow eye weigh?\u003c\/strong\u003e The Sea-Dog Twin Shank Bow Eye 079233-1 weighs 0.592 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the twin-shank design offer over a standard bow eye?\u003c\/strong\u003e A U-bolt surrounds the cast eye on the 079233-1, forming two mounting shanks that add strength compared to a single-shank bow eye design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bow eye fit a specific boat make or model?\u003c\/strong\u003e The 079233-1 is a universal-fit bow eye and is not limited to a specific boat make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does the 079233-1 bow eye have?\u003c\/strong\u003e It has a chrome plated finish over the die cast zinc head and chrome steel shafts, giving it a bright silver appearance.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544958683,"sku":"S-D-079233-1","price":14.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7492.jpg?v=1784421947"},{"product_id":"sea-dog-080033-1-twin-shank-bow-eye-2-1-2-in-shaft-machined-304-stainless-steel-boat-bow-tie-down","title":"Sea-Dog 080033-1 Twin Shank Stainless Steel Bow Eye, 3\/8 Inch Shaft x 2-1\/2 Inch","description":"\u003cp\u003eThe Sea-Dog 080033-1 is a twin shank bow eye designed to serve as a tie-down point on a boat's bow. It is machined from corrosion resistant 304 stainless steel for long-term durability in a marine environment. The shaft is threaded 3\/8 inch NC with rolled threads, and measures 2-1\/2 inches in shaft length. Unlike bow eyes that rely on a crimped ring to hold the shank in place, this bow eye is supplied with adjustable finish nuts, which provide superior holding performance compared to crimp ring style stern and bow eyes. The twin shank design distributes tie-down load across two threaded studs passing through the hull or bow fitting, and the assembly is rated to a 16,000 pound breaking strength.\u003c\/p\u003e\u003cp\u003eThis bow eye is part of a Sea-Dog family of machined 304 stainless steel bow eyes offered in multiple shaft lengths, so boat owners can match the shaft length to their hull thickness and mounting hardware. For a more robust lifting assembly, it can be used together with Sea-Dog Lift Eyes (048330 or 048350).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 080033-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Twin Shank Bow Eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Machined 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/8 inch NC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Diameter:\u003c\/strong\u003e 3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Length:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 3-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 1-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking Strength:\u003c\/strong\u003e 16,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.314 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 1.88 x 0.88 x 0.88 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514080095\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Adjustable finish nuts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis bow eye is a universal bow tie-down fitting and is not restricted to a specific boat make or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers apply to this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the shaft length on the Sea-Dog 080033-1 bow eye?\u003c\/strong\u003e The shaft length is 2-1\/2 inches, with a 3\/8 inch NC threaded shaft that has rolled threads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 080033-1 bow eye made from?\u003c\/strong\u003e It is machined from 304 stainless steel, which resists corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can this bow eye hold?\u003c\/strong\u003e The Sea-Dog 080033-1 twin shank bow eye is rated to a 16,000 pound breaking strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this bow eye?\u003c\/strong\u003e The 080033-1 comes with adjustable finish nuts, rather than the crimp ring used on many bow eyes, for a stronger, more serviceable hold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 080033-1 bow eye weigh?\u003c\/strong\u003e It weighs 0.314 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this bow eye be used with a lift eye for lifting the boat?\u003c\/strong\u003e Yes, the 080033-1 bow eye can be used together with Sea-Dog Lift Eyes 048330 or 048350 to create a more robust lifting assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from a crimp ring style bow eye?\u003c\/strong\u003e The 080033-1 uses adjustable finish nuts on its threaded shaft instead of a crimped ring, which Sea-Dog states provides superior performance over crimp ring style bow and stern eyes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does the 080033-1 bow eye use?\u003c\/strong\u003e It has a 3\/8 inch NC (National Coarse) threaded shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre other shaft lengths available in this bow eye style?\u003c\/strong\u003e Yes, Sea-Dog offers this same twin shank, 304 stainless steel bow eye in other shaft lengths, including a 1-1\/2 inch shaft (080031-1), a 3-1\/2 inch shaft (080035-1), and a 4-1\/4 inch shaft (080036-1); the 080033-1 is the 2-1\/2 inch shaft version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this bow eye fit any boat?\u003c\/strong\u003e The 080033-1 is a universal bow tie-down fitting, not limited to a specific boat make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 080033-1 bow eye?\u003c\/strong\u003e Beyond the 2-1\/2 inch, 3\/8 inch NC threaded shaft, the fitting measures 1-1\/16 inches, 3-15\/16 inches, and 1-7\/16 inches across its other listed dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 080033-1 bow eye?\u003c\/strong\u003e The UPC for the 080033-1 twin shank bow eye is 035514080095.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988545089755,"sku":"S-D-080033-1","price":16.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7496.jpg?v=1784421972"},{"product_id":"sea-dog-080055-1-stainless-steel-bow-eye-1-2-in-nc-thread-machined-304-ss-boat-bow-tie-down-point","title":"Sea-Dog Stainless Steel Bow Eye, 1\/2 Inch NC Thread, 080055-1","description":"\u003cp\u003eThe Sea-Dog Bow Eye (080055-1) is a machined stainless steel mounting eye used as an anchor point on the bow of a boat, commonly for winch hook-up, trailer tie-down, or towing. Unlike many bow eyes that use a crimped ring to hold the eye assembly together, this one is finished with nuts, giving a more secure, serviceable connection at the base of the eye. The threaded shank is 1\/2 inch NC (National Coarse), and the part is machined from AISI 304 stainless steel for corrosion resistance in fresh and salt water environments.\u003c\/p\u003e\u003cp\u003eOverall dimensions are compact: the eye stands 3-1\/2 inches tall (B), with a 7\/16 inch eye\/rod section (A), a 1-3\/8 inch inner dimension (C), an overall span of 4-15\/16 inches (D), and a 1-7\/8 inch measurement (E) at the base. The unit weighs 0.69 pounds and is supplied as a single piece. This bow eye is intended as a direct mount point for boats needing a stainless steel towing or lifting eye at the bow.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 080055-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bow Eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e AISI 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/2 inch NC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (Eye\/Rod Section):\u003c\/strong\u003e 7\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B (Height):\u003c\/strong\u003e 3-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D (Overall Span):\u003c\/strong\u003e 4-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e Finished nuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.69 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514080118\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the thread size on the Sea-Dog 080055-1 bow eye?\u003c\/strong\u003e The threaded shank on the Sea-Dog 080055-1 bow eye is 1\/2 inch NC (National Coarse).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this bow eye made from?\u003c\/strong\u003e It is machined from AISI 304 stainless steel, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 080055-1 bow eye attach at the base?\u003c\/strong\u003e The 080055-1 bow eye uses finished nuts to secure the assembly at the base, rather than the crimped ring found on many other bow eyes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the Sea-Dog 080055-1 bow eye?\u003c\/strong\u003e It measures 3-1\/2 inches in height (B), with a 7\/16 inch eye\/rod section (A), 1-3\/8 inches at C, an overall span of 4-15\/16 inches (D), and 1-7\/8 inches at E.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 080055-1 bow eye weigh?\u003c\/strong\u003e The Sea-Dog 080055-1 bow eye weighs 0.69 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bow eyes come in one package?\u003c\/strong\u003e One Sea-Dog 080055-1 bow eye is included per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 080055-1 bow eye typically used for?\u003c\/strong\u003e It serves as a bow-mounted stainless steel eye for tasks such as winch hook-up or trailer tie-down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 080055-1 bow eye genuine Sea-Dog hardware?\u003c\/strong\u003e Yes, the 080055-1 is a genuine Sea-Dog part, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 080055-1 bow eye have?\u003c\/strong\u003e It has a stainless steel finish throughout, consistent with its AISI 304 stainless steel construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 080055-1 different from bow eyes with a crimped ring?\u003c\/strong\u003e Where many competing bow eyes rely on a crimped ring to hold the assembly together, the Sea-Dog 080055-1 uses finished nuts instead, which allows for a more serviceable connection.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988545286363,"sku":"S-D-080055-1","price":24.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7479.jpg?v=1784421994"},{"product_id":"sea-dog-328040-1-anchor-lift-lock-bow-roller-electro-galvanized-steel-one-handed-locking-for-3-8-rope-up-to-20-lb-anchors","title":"Sea-Dog 328040-1 Anchor Lift and Lock Bow Roller, Electro-Galvanized Steel, 3\/8 Inch Rope","description":"\u003cp\u003eThe Sea-Dog 328040-1 Anchor Lift and Lock Bow Roller is a bow-mounted anchor roller built for simple, one-handed anchor handling. Lifting up on the anchor line releases the roller's locking system, letting you feed out rope until the anchor reaches the depth you want. Once you lower the line back down, the weight of the anchor itself activates a built-in braking mechanism that locks the line in place, so there is no need to manually cleat or hold tension while anchoring or retrieving.\u003c\/p\u003e\u003cp\u003eThe roller is constructed of electro-galvanized steel for corrosion resistance in a marine environment, and it is sized to handle anchor rope up to 3\/8 inch in diameter, with a maximum anchor weight rating of 20 pounds. It measures 6-13\/16 inches by 13\/16 inch by 1-7\/8 inches and installs with four #10 RH fasteners (fasteners are not included). This roller is a straightforward retrofit or new-build addition to a boat's bow for anyone who wants faster, safer anchor deployment and retrieval without fighting the line by hand.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 328040-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Electro-Galvanized Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 6-13\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 13\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Anchor Weight:\u003c\/strong\u003e 20 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Rope Diameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 RH (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.508 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 16.94 x 4.5 x 5.63 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514328333\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum rope diameter the Sea-Dog 328040-1 can handle?\u003c\/strong\u003e The 328040-1 Anchor Lift and Lock Bow Roller handles anchor rope up to 3\/8 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much anchor weight is this bow roller rated for?\u003c\/strong\u003e 20 pounds is the maximum anchor weight rating for the Sea-Dog 328040-1 Anchor Lift and Lock Bow Roller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 328040-1 bow roller made from?\u003c\/strong\u003e It is constructed of electro-galvanized steel, chosen for corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the lift and lock mechanism work on this roller?\u003c\/strong\u003e Lifting up on the anchor line releases the roller's locking system so you can feed out rope to the desired depth; lowering the line back down lets the weight of the anchor activate the braking mechanism and lock the line in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners do I need to install the 328040-1?\u003c\/strong\u003e Four #10 RH fasteners are required to mount the Sea-Dog 328040-1, and they are not included with the roller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog Anchor Lift and Lock Bow Roller?\u003c\/strong\u003e The 328040-1 measures 6-13\/16 inches by 13\/16 inch by 1-7\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 328040-1 weigh?\u003c\/strong\u003e 0.508 pounds is the weight of the Sea-Dog 328040-1 Anchor Lift and Lock Bow Roller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 328040-1 designed for one-handed anchor operation?\u003c\/strong\u003e Yes, the Anchor Lift and Lock Bow Roller is designed to be operated one-handed by lifting the line to release the lock and feeding rope out as needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Sea-Dog 328040-1 fit any boat's bow?\u003c\/strong\u003e The Anchor Lift and Lock Bow Roller is not restricted to a specific boat make or model; it mounts with four #10 RH fasteners at the bow wherever roller clearance allows.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 328040-1 different from the Sea-Dog 328050 Short Bow Roller?\u003c\/strong\u003e The 328040-1 Anchor Lift and Lock Bow Roller is electro-galvanized steel, handles rope up to 3\/8 inch, and adds a lift-and-lock braking mechanism, while the Sea-Dog 328050 Short Bow Roller is investment cast 316 stainless steel, handles rope up to 1 inch, and does not include a locking feature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 328040-1 come with mounting hardware in the box?\u003c\/strong\u003e No, the 328040-1 ships without fasteners; four #10 RH fasteners are needed for installation and must be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 328040-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, 328040-1 is Sea-Dog's own manufacturer part number for the Anchor Lift and Lock Bow Roller.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988752609499,"sku":"S-D-328040-1","price":13.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4684.jpg?v=1784428742"},{"product_id":"sea-dog-328059-1-replacement-rubber-wheel-for-328051-platform-bow-roller-fits-rope-up-to-1-in","title":"Sea-Dog Replacement Bow Roller Wheel 328059-1, Fits Short Bow Roller 328052 and Extended Fairlead Bow Roller 328053","description":"\u003cp\u003eThe Sea-Dog Replacement Bow Roller Wheel 328059-1 is a direct-fit replacement wheel for Sea-Dog bow roller assemblies, designed to keep anchor handling smooth and free of hull or deck damage. The wheel is sized to accommodate anchor rope up to 1 inch in diameter, letting it roll freely as the rope or chain passes over it during anchoring and retrieval. It measures 1-3\/4 inch by 2-1\/2 inch and is built with a natural rubber wheel and brass insert for smooth rotation and resistance to the corrosive effects of saltwater exposure.\u003c\/p\u003e\u003cp\u003eThis wheel is the factory replacement part for two Sea-Dog bow roller assemblies: the Short Bow Roller (328052) and the Extended Fairlead Bow Roller (328053), both of which use this same 1-3\/4 inch by 2-1\/2 inch wheel. It ships as a standalone wheel for owners who need to replace a worn or damaged roller wheel without purchasing an entirely new bow roller assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 328059-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Replacement Bow Roller Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Dimensions:\u003c\/strong\u003e 1-3\/4 inch x 2-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Natural rubber with brass insert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Rope Diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.266 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Assemblies:\u003c\/strong\u003e Sea-Dog Short Bow Roller 328052, Sea-Dog Extended Fairlead Bow Roller 328053\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSea-Dog Short Bow Roller, part number 328052\u003c\/li\u003e\n\u003cli\u003eSea-Dog Extended Fairlead Bow Roller, part number 328053\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eThis is a Sea-Dog OEM replacement wheel; no third-party cross-reference numbers apply.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Sea-Dog part number 328059-1?\u003c\/strong\u003e It is a replacement bow roller wheel measuring 1-3\/4 inch by 2-1\/2 inch, sold to fit Sea-Dog bow roller assemblies that use this wheel size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich bow rollers does the 328059-1 wheel fit?\u003c\/strong\u003e The 328059-1 wheel fits the Sea-Dog Short Bow Roller (328052) and the Sea-Dog Extended Fairlead Bow Roller (328053).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size rope will this wheel handle?\u003c\/strong\u003e The wheel accommodates anchor rope up to 1 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the wheel made of?\u003c\/strong\u003e It is built with a natural rubber wheel and a brass insert for smooth rotation and corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 328059-1 wheel weigh?\u003c\/strong\u003e It weighs 0.266 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the replacement wheel?\u003c\/strong\u003e The 328059-1 wheel measures 1-3\/4 inch by 2-1\/2 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many wheels come in a pack?\u003c\/strong\u003e Sea-Dog part 328059-1 is sold in a standard pack of 5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any tools to install this wheel?\u003c\/strong\u003e The wheel is a component replacement for the roller assembly's axle; the mounting bolts used to install the bow roller assembly itself are sold separately and not included with the wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog part or an aftermarket copy?\u003c\/strong\u003e Part number 328059-1 is a genuine Sea-Dog manufacturer replacement wheel, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this wheel on a bow roller from a different brand?\u003c\/strong\u003e The 328059-1 wheel is listed as the replacement wheel for the Sea-Dog Short Bow Roller 328052 and Extended Fairlead Bow Roller 328053; fitment to other brands' bow rollers is not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace the bow roller wheel instead of the whole assembly?\u003c\/strong\u003e The wheel on a bow roller assembly like the Sea-Dog 328052 or 328053 can wear out from rope friction over time, so Sea-Dog sells the 328059-1 wheel separately to avoid replacing the entire stainless steel roller assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the brass insert on the 328059-1 wheel do?\u003c\/strong\u003e The brass insert in the Sea-Dog 328059-1 wheel supports smooth, low-friction rotation as rope passes over the roller.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988752806107,"sku":"S-D-328059-1","price":13.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4687.jpg?v=1784428750"},{"product_id":"sea-dog-328069-1-bow-roller-replacement-wheel-2-15-16-x-2-3-4-fits-medium-pivoting-medium-bow-rollers-328064-328068","title":"Sea-Dog Bow Roller Replacement Wheel 328069-1, 2-15\/16 x 2-3\/4 Inch, Rubber, Fits 328068 Pivoting Bow Roller","description":"\u003cp\u003eThe Sea-Dog 328069-1 is a replacement wheel for the Sea-Dog Pivoting Medium Bow Roller (part 328068), a self-launching anchor roller system. As anchor line is played out, the roller pivots downward under the weight of the anchor, letting it fall freely into the water. The wheel itself is rubber and accommodates rope up to 1-1\/2 inch in diameter, giving smooth, low-friction anchor line deployment and retrieval. It measures 2-15\/16 inches by 2-3\/4 inches, matching the dimensions of the wheel used in the 328068 bow roller assembly.\u003c\/p\u003e\u003cp\u003eThis wheel is sold as a replacement part for boat owners whose original bow roller wheel has worn out, cracked, or seized, letting them restore the roller to working condition without replacing the entire stainless steel bow roller frame. It is intended for use with the Pivoting Medium Bow Roller and is not the same wheel used on Sea-Dog's Large Anchor Bow Roller, which uses a larger wheel under a different part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 328069-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Bow Roller Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Diameter:\u003c\/strong\u003e 2-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Width:\u003c\/strong\u003e 2-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Rope Diameter:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Sea-Dog Pivoting Medium Bow Roller (part 328068)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSea-Dog Pivoting Medium Bow Roller, part number 328068\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sea-Dog 328069-1 wheel fit?\u003c\/strong\u003e The Sea-Dog 328069-1 is the replacement wheel for the Sea-Dog Pivoting Medium Bow Roller, part number 328068.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size rope can this wheel handle?\u003c\/strong\u003e The 328069-1 wheel accommodates anchor rope up to 1-1\/2 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the wheel?\u003c\/strong\u003e The wheel measures 2-15\/16 inches in diameter by 2-3\/4 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 328069-1 wheel made of?\u003c\/strong\u003e It is a rubber wheel, designed to run smoothly against anchor rope on the Pivoting Medium Bow Roller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this part weigh?\u003c\/strong\u003e The Sea-Dog 328069-1 replacement wheel weighs 0.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this wheel fit the Sea-Dog Large Anchor Bow Roller?\u003c\/strong\u003e No. The Large Anchor Bow Roller uses a larger 3-3\/8 inch by 3 inch wheel under a different part number (328079-1), so it is not interchangeable with the 328069-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 328069-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, 328069-1 is the genuine Sea-Dog manufacturer part number for this replacement bow roller wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this wheel packaged?\u003c\/strong\u003e The Sea-Dog 328069-1 wheel has a standard pack quantity of 5 each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 328069-1 wheel come with mounting hardware or bolts?\u003c\/strong\u003e The wheel itself is a replacement component; the Pivoting Medium Bow Roller assembly it fits installs with 3\/8 inch bolts, which are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this wheel and the bow roller assembly itself?\u003c\/strong\u003e The 328069-1 is only the replacement rubber wheel, sized 2-15\/16 by 2-3\/4 inches, while the full Pivoting Medium Bow Roller (328068) is the complete stamped 304 stainless steel roller assembly it mounts into.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace this wheel?\u003c\/strong\u003e Boat owners replace the 328069-1 wheel when the original wheel on their Sea-Dog Pivoting Medium Bow Roller wears out, allowing the anchor line to run smoothly again without replacing the entire roller.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988752838875,"sku":"S-D-328069-1","price":15.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4693.jpg?v=1784428751"},{"product_id":"sea-dog-328079-1-replacement-bow-roller-wheel-3-3-8-in-x-3-in-natural-rubber-with-brass-insert-fits-large-anchor-platform-bow-rollers","title":"Sea-Dog Replacement Bow Roller Wheel 328079-1, 3-3\/8 x 3 Inch Natural Rubber with Brass Insert","description":"\u003cp\u003eThe Sea-Dog 328079-1 is a replacement bow roller wheel measuring 3-3\/8 inches by 3 inches, built to restore worn or damaged anchor rollers to full working condition. It is molded from natural rubber around a brass insert bushing, giving the wheel smooth, low-friction rotation as anchor rope or rode runs over it while resisting the wear and tear of repeated anchoring cycles. The rubber surface accommodates rope up to 1-1\/2 inches in diameter, making it suited to a wide range of anchor rode sizes used on recreational boats.\u003c\/p\u003e\u003cp\u003eThis wheel is the factory replacement part for the Sea-Dog Large Platform Bow Roller, designed to handle most fluke-style anchors and mount in or under the anchor slot of a bow platform or bow plank. Rather than replacing the entire stainless steel roller assembly, boat owners can swap in this wheel alone once the original wears out, saving the cost of a full unit. Each wheel is sold in a standard pack of 5, making it practical for shops, fleets, or owners who want spares on hand.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 328079-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Replacement Bow Roller Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Diameter:\u003c\/strong\u003e 3-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Width:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Natural rubber with brass insert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Rope Diameter:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.746 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514328357\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Sea-Dog Large Platform Bow Roller, part number 328076\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned as the replacement wheel for the Sea-Dog Large Platform Bow Roller (part number 328076), which mounts in or under the anchor slot of a bow platform or bow plank and handles most fluke-style anchors.\u003c\/li\u003e\n\u003cli\u003eAccommodates anchor rope up to 1-1\/2 inches in diameter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 328079-1 bow roller wheel?\u003c\/strong\u003e The Sea-Dog 328079-1 replacement wheel measures 3-3\/8 inches in diameter by 3 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this wheel made of?\u003c\/strong\u003e It is molded from natural rubber with a brass insert bushing, which lets the wheel rotate smoothly on its mounting pin while standing up to repeated exposure to anchor rope and marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat roller does the 328079-1 wheel fit?\u003c\/strong\u003e This wheel is the factory replacement for the Sea-Dog Large Platform Bow Roller, part number 328076, which mounts in or under the anchor slot of a bow platform or bow plank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size rope will this wheel handle?\u003c\/strong\u003e Yes, the 328079-1 wheel accommodates anchor rope up to 1-1\/2 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many wheels come in a pack?\u003c\/strong\u003e The Sea-Dog 328079-1 is sold in a standard pack of 5 wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does one wheel weigh?\u003c\/strong\u003e Each Sea-Dog 328079-1 replacement wheel weighs 0.746 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace the whole bow roller assembly, or just the wheel?\u003c\/strong\u003e If only the rubber wheel on your Sea-Dog 328076 Large Platform Bow Roller is worn, you can replace just the wheel with the 328079-1 rather than buying a complete new roller assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an original Sea-Dog part or a generic substitute?\u003c\/strong\u003e The 328079-1 is Sea-Dog's own factory replacement wheel for its Large Platform Bow Roller, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the UPC 035514328357 correspond to?\u003c\/strong\u003e UPC 035514328357 identifies the Sea-Dog 328079-1 replacement bow roller wheel, 3-3\/8 inches by 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the brass insert wear out or need lubrication?\u003c\/strong\u003e The brass insert bushing in the 328079-1 wheel is designed to provide smooth rotation without added lubrication, and its bronze-alloy construction resists corrosion in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this wheel?\u003c\/strong\u003e Ordering the Sea-Dog 328079-1 gets you the natural rubber wheel with brass insert only, in a pack of 5; the mounting pin, hardware, and roller frame are part of the separate 328076 roller assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this wheel be used for other anchor rollers besides the Sea-Dog 328076?\u003c\/strong\u003e The 328079-1 is specified by Sea-Dog as the replacement wheel for its 328076 Large Platform Bow Roller; compatibility with other rollers is not specified.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988754870491,"sku":"S-D-328079-1","price":24.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4696.jpg?v=1784428792"},{"product_id":"lewmar-quick-release-mounting-bracket-for-axis-and-vector-shallow-water-anchors-black-aluminum-2023043513","title":"Lewmar Quick Release Mounting Bracket for Axis and Vector Shallow Water Anchors, Black Aluminum, 2023043513","description":"\u003cp\u003eThe Lewmar Quick Release Mounting Bracket, part number 2023043513, is a dovetail-style mounting bracket built for the Lewmar Axis and Vector shallow water anchors. It mounts directly to the boat's transom (or to another compatible Lewmar mounting bracket) and lets the anchor slide out and back in with simple hand tools, so you can remove it quickly for trailering, storage, or moving it to another vessel. The dovetail design securely locks the anchor in place while underway, then releases it in seconds when you need it off the boat.\u003c\/p\u003e\u003cp\u003eThe bracket is machined from aluminum with a powder-coated black finish that is built to hold up in harsh marine conditions, resisting corrosion and UV exposure over repeated use. It is designed for port or starboard mounting, so the same bracket can be installed on either side of the boat. It is also compatible with other Lewmar shallow water anchor mounting brackets, giving you flexibility if you want to set up multiple quick-release mounting points. Installation is DIY-friendly: the bracket ships with mounting hardware and printed installation instructions, so no special tools or fabrication are required to get it fitted.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lewmar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2023043513\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Powder Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 8 inches x 6 inches x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Dovetail quick release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Anchors:\u003c\/strong\u003e Lewmar Axis and Vector shallow water anchors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Mounting hardware, installation instructions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011853011\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Lewmar Quick Release Mounting Bracket 2023043513 used for?\u003c\/strong\u003e It is a dovetail-style bracket that mounts a Lewmar Axis or Vector shallow water anchor to a boat's transom and allows the anchor to be slid out for transport, storage, or moving between boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich anchors work with this bracket?\u003c\/strong\u003e Bracket 2023043513 is designed for use with the Lewmar Axis and Vector shallow water anchors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this bracket be mounted on either side of the boat?\u003c\/strong\u003e Yes, this Lewmar bracket is designed for port or starboard mounting, so it can be installed on either side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the mounting bracket?\u003c\/strong\u003e The Lewmar 2023043513 bracket ships with mounting hardware and printed installation instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I remove the anchor once the bracket is installed?\u003c\/strong\u003e The dovetail design of the 2023043513 bracket lets the anchor slide free using simple hand tools, no special equipment needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the bracket made from?\u003c\/strong\u003e It is made from aluminum with a powder-coated black finish designed to withstand harsh marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this bracket?\u003c\/strong\u003e The Lewmar 2023043513 mounting bracket measures 8 inches by 6 inches by 1.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the bracket weigh?\u003c\/strong\u003e The bracket weighs 5.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bracket compatible with other Lewmar mounting brackets?\u003c\/strong\u003e Yes, the 2023043513 bracket is compatible with other Lewmar shallow water anchor mounting brackets, allowing the anchor to move between compatible mounting points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes installation require professional help?\u003c\/strong\u003e No, the 2023043513 bracket is designed for DIY installation using the included mounting hardware and instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options does this bracket come in?\u003c\/strong\u003e This listing for part 2023043513 is the black finish version of the Lewmar quick release mounting bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this bracket protect the anchor mount from corrosion?\u003c\/strong\u003e The powder-coated aluminum construction of the 2023043513 bracket is built to resist the effects of harsh marine conditions.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":49025132003547,"sku":"LEW-2023043513","price":72.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/719QURDSHjL_6130a8c3-cfeb-401b-9aaa-42428224a9fa.jpg?v=1785330955"},{"product_id":"lewmar-2024028468-swa-quick-release-mounting-bracket-white","title":"Lewmar 2024028468 SWA Quick Release Mounting Bracket, White","description":"\u003cp\u003eThe Lewmar 2024028468 is a quick release mounting bracket for shallow water anchor (SWA) systems, finished in white. It provides a fast-disconnect mounting point so the anchor unit can be released from its mount or reattached without tools, which is useful for maintenance, storage, or swapping between boats. The white finish is intended to match light-colored hull and deck surfaces for a clean, integrated look.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lewmar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2024028468\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Shallow Water Anchor Mounting Bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelease Type:\u003c\/strong\u003e Quick release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011854506\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Lewmar 2024028468 used for?\u003c\/strong\u003e The Lewmar 2024028468 is a quick release mounting bracket for shallow water anchor (SWA) systems, allowing the anchor unit to be detached from its mount without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this mounting bracket?\u003c\/strong\u003e The Lewmar 2024028468 mounting bracket is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lewmar 2024028468 bracket weigh?\u003c\/strong\u003e This bracket weighs 5.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bracket compatible with all Lewmar shallow water anchors?\u003c\/strong\u003e The Lewmar 2024028468 is designated as a shallow water anchor (SWA) mounting bracket; specific model compatibility beyond this is not stated in available product data.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the bracket allow tool-free removal of the anchor?\u003c\/strong\u003e Yes, the quick release design of the Lewmar 2024028468 lets the anchor unit be released from the mount without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Lewmar 2024028468?\u003c\/strong\u003e The UPC for this Lewmar mounting bracket is 040011854506.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Lewmar 2024028468 a genuine Lewmar part?\u003c\/strong\u003e Yes, the 2024028468 is a genuine Lewmar part number for this quick release SWA mounting bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this bracket be used for permanent mounting instead of quick release?\u003c\/strong\u003e The Lewmar 2024028468 is designed specifically as a quick release bracket; no alternate permanent-mount configuration is specified for this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is the Lewmar 2024028468?\u003c\/strong\u003e The Lewmar 2024028468 falls under shallow water anchor (SWA) accessories, specifically the mounting bracket component.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":49025132363995,"sku":"LEW-2024028468","price":72.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_d5c2cb4c-2969-41b5-9b21-9f3975c21688.png?v=1785349682"},{"product_id":"lewmar-66840007-bow-roller-for-fluke-style-anchors-up-to-35-lbs-304-stainless-steel","title":"Lewmar 66840007 Bow Roller for Fluke Style Anchors up to 35 lbs, 304 Stainless Steel","description":"\u003cp\u003eThe Lewmar 66840007 is a bow-mounted anchor roller built for fluke-style anchors up to 35 pounds. It provides a friction-free surface so the anchor drops and retrieves smoothly, without dragging or catching at the bow. The roller is part of a range Lewmar offers to fit common combinations of anchor type, mounting style, and boat, letting you match the roller to your specific anchor setup rather than forcing a one-size-fits-all fit.\u003c\/p\u003e\u003cp\u003eBecause the roller surface takes the wear instead of the deck or topsides, it protects your boat's finish from chain and anchor shank contact during deployment and retrieval. This lets you safely stow the anchor at the bow while underway and deploy it again at short notice, which is especially useful for boats that anchor frequently throughout the day. The roller is constructed of 304 stainless steel for corrosion resistance in a marine environment, and is sized to handle fluke-style anchors up to 35 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lewmar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 66840007\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Compatibility:\u003c\/strong\u003e Fluke style anchors up to 35 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 18 x 10 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.5625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 743683320774\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for fluke-style anchors up to 35 pounds.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size anchor does the Lewmar 66840007 bow roller fit?\u003c\/strong\u003e The Lewmar 66840007 is designed for fluke-style anchors up to 35 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Lewmar 66840007 made of?\u003c\/strong\u003e It is constructed of 304 stainless steel for corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this roller damage my deck or topsides?\u003c\/strong\u003e No. The Lewmar 66840007 provides a friction-free roller surface specifically so the anchor and chain do not damage the deck or topsides during deployment and retrieval.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I leave my anchor on the roller while underway?\u003c\/strong\u003e Yes, the Lewmar 66840007 allows you to safely stow the anchor at the bow while cruising and deploy it again at short notice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lewmar 66840007 bow roller weigh?\u003c\/strong\u003e It weighs 7.5625 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of this bow roller?\u003c\/strong\u003e The Lewmar 66840007 ships in a package measuring 18 x 10 x 6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Lewmar 66840007 fit anchor types other than fluke style?\u003c\/strong\u003e This specific part number, 66840007, is designed for fluke-style anchors up to 35 pounds; Lewmar offers a range of other rollers sized for different anchor types and mounting styles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the roller surface designed to reduce friction when dropping anchor?\u003c\/strong\u003e Yes, the Lewmar 66840007 has a friction-free surface that makes dropping and retrieving the anchor easier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Lewmar 66840007 bow roller?\u003c\/strong\u003e The UPC for the Lewmar 66840007 bow roller is 743683320774.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bow roller include mounting hardware?\u003c\/strong\u003e The listed contents for the Lewmar 66840007 are the bow roller itself; no additional mounting hardware is specified.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":49025134166235,"sku":"LEW-66840007","price":252.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2__72637.1755186781.500.750.jpg?v=1785329117"},{"product_id":"lewmar-bow-anchor-roller-66840009-for-delta-and-dtx-anchors-14-22-and-35-lb-stainless-steel","title":"Lewmar Bow Anchor Roller 66840009 for Delta and DTX Anchors 14, 22 and 35 lb, Stainless Steel","description":"\u003cp\u003eThe Lewmar bow anchor roller (part number 66840009) is a stainless steel roller assembly designed to fit Delta and DTX anchors weighing 14, 22, or 35 lb (7, 10, or 16 kg). It mounts at the bow and provides a friction-free surface for dropping, retrieving, and stowing the anchor without dragging it across the deck or hull.\u003c\/p\u003e\u003cp\u003eThe roller frame is built from 304 stainless steel with a chrome finish for corrosion resistance and a clean appearance on the bow. The rollers themselves are made of Delrin, a low-friction material that lets the anchor shank slide smoothly through the assembly during deployment and retrieval, reducing wear on both the anchor and the boat's finish. The roller measures 23 1\/2 inches (597 mm) in length and weighs 7.2 pounds. Mounting hardware is not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003eThis roller is sized specifically for the Delta and DTX anchor shape and weight range, allowing the anchor to seat securely for safe stowage while underway and quick deployment when needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lewmar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 66840009\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bow Anchor Roller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Anchor Types:\u003c\/strong\u003e Delta and DTX anchors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Anchor Weights:\u003c\/strong\u003e 14 lb, 22 lb, and 35 lb (7 kg, 10 kg, and 16 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 23 1\/2 inches (597 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 stainless steel frame with Delrin rollers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 743683320798\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDelta anchors: 14 lb, 22 lb, and 35 lb (7 kg, 10 kg, and 16 kg)\u003c\/li\u003e\n\u003cli\u003eDTX anchors: 14 lb, 22 lb, and 35 lb (7 kg, 10 kg, and 16 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat anchors does the Lewmar 66840009 bow roller fit?\u003c\/strong\u003e It is designed for Delta and DTX anchors weighing 14 lb, 22 lb, or 35 lb (7 kg, 10 kg, or 16 kg).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Lewmar bow anchor roller?\u003c\/strong\u003e The roller measures 23 1\/2 inches (597 mm) in overall length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Lewmar 66840009 roller come with mounting hardware?\u003c\/strong\u003e No, mounting hardware is not included with this roller and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Lewmar bow roller made of?\u003c\/strong\u003e The frame is 304 stainless steel with a chrome finish, and the rollers themselves are made of Delrin for a low-friction surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does part number 66840009 weigh?\u003c\/strong\u003e This Lewmar bow anchor roller weighs 7.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this roller fit anchors heavier than 35 lb?\u003c\/strong\u003e The Lewmar 66840009 roller is rated for Delta and DTX anchors up to 35 lb (16 kg); it is not specified for heavier anchors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does this bow roller have?\u003c\/strong\u003e It has a chrome finish over the 304 stainless steel frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this roller be used with anchor types other than Delta or DTX?\u003c\/strong\u003e This roller is designed specifically for Delta and DTX anchors in the 14 to 35 lb range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Lewmar 66840009 a genuine Lewmar part?\u003c\/strong\u003e Yes, this is a genuine Lewmar bow anchor roller, part number 66840009.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this roller?\u003c\/strong\u003e The anchor roller assembly itself is included; mounting hardware is not included and is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the roller damage my hull or deck when retrieving the anchor?\u003c\/strong\u003e No, the Delrin rollers provide a friction-free surface so the anchor will not damage the deck or topsides during retrieval.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I safely stow my anchor in this roller while underway?\u003c\/strong\u003e Yes, the Lewmar 66840009 roller lets you safely stow the anchor while cruising and deploy it on short notice.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":49025137705179,"sku":"LEW-66840009","price":290.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/img_d60f7ef8-72c6-46f9-b2f3-ca93065e9ac7.jpg?v=1785332756"},{"product_id":"anchorlift-90103-self-launching-hinged-bow-roller-22-8-l-x-3-w","title":"Anchorlift 90103 Self-Launching Hinged Bow Roller, 22.8 L x 3 W","description":"\u003cp\u003eThe Anchorlift 90103 is a self-launching hinged bow roller built to make anchor deployment and retrieval smoother and safer at the bow. The hinged roller design lets the anchor swing and roll freely as it is lowered or raised, reducing the chance of the anchor catching or scraping against the hull during launch and stowage. This makes it a practical upgrade for boat owners who want a more controlled, self-launching anchor setup at the bow rather than manually guiding the anchor over the rail.\u003c\/p\u003e\u003cp\u003eThe roller measures 22.8 L x 3 W and weighs 10 pounds, giving it a solid, stable footprint for mounting at the bow. It is sold as a standalone bow roller unit intended to be fitted into an existing bow anchor pulpit or mounting arrangement. Its hinged construction is the key functional feature, allowing the roller to pivot with the anchor's movement rather than holding it in a fixed position, which is the core benefit of a self-launching roller over a standard fixed roller.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Anchorlift\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 90103\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Bow Roller Self Launching\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Hinged, self-launching\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 22.8 L x 3 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 489394319311\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Anchor Rollers and Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Anchorlift 90103?\u003c\/strong\u003e The Anchorlift 90103 is a self-launching hinged bow roller designed to guide an anchor smoothly over the bow during deployment and retrieval.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'self-launching' mean for this bow roller?\u003c\/strong\u003e It means the Anchorlift 90103's hinged roller pivots with the anchor's movement, allowing the anchor to swing out and launch on its own rather than needing to be manually guided over the bow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Anchorlift 90103 bow roller?\u003c\/strong\u003e The Anchorlift 90103 measures 22.8 L x 3 W.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Anchorlift 90103 bow roller weigh?\u003c\/strong\u003e It weighs 10 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Anchorlift 90103 hinged or fixed?\u003c\/strong\u003e The Anchorlift 90103 uses a hinged design, which is what allows it to function as a self-launching roller rather than a fixed roller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Anchorlift 90103?\u003c\/strong\u003e The UPC for the Anchorlift 90103 bow roller is 489394319311.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of hardware is the Anchorlift 90103?\u003c\/strong\u003e The Anchorlift 90103 is listed under anchor rollers and mounts, used for bow-mounted anchor handling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Anchorlift 90103 come with mounting hardware included?\u003c\/strong\u003e The dossier for the Anchorlift 90103 does not specify included mounting hardware, so buyers should confirm fitment with their existing bow pulpit or mount before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Anchorlift 90103 be used on either side of the bow?\u003c\/strong\u003e No side-specific designation is given for the Anchorlift 90103; it is offered as a single bow roller unit rather than a left- or right-specific part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a self-launching bow roller like the 90103 over a standard fixed roller?\u003c\/strong\u003e A hinged, self-launching roller such as the Anchorlift 90103 lets the anchor pivot and roll with less manual guidance, which can reduce hull contact and make anchor handling at the bow easier.\u003c\/p\u003e","brand":"Anchorlift","offers":[{"title":"Default Title","offer_id":49027427565787,"sku":"ACL-90103","price":757.31,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/img_d720c950-434c-4c2a-b87c-255a2d4dc8b0.jpg?v=1785332678"},{"product_id":"trac-self-launching-anchor-roller-for-delta-and-fluke-anchors-up-to-44-lbs-boats-up-to-40-feet-69062","title":"TRAC Self-Launching Anchor Roller for Delta and Fluke Anchors up to 44 lbs, Boats up to 40 Feet, 69062","description":"\u003cp\u003eThe TRAC Self-Launching Anchor Roller (69062) is a stainless steel deck-mounted roller built for boat owners who want smooth, quiet anchor deployment and retrieval. It is designed for delta, fluke, and other style anchors up to 44 lbs and is intended for boats up to 40 feet in length. The roller pairs with any anchor winch or windlass, including Big Water and Titan models, making it a flexible upgrade for boats already running a powered anchor system.\u003c\/p\u003e\u003cp\u003eA tilting anchor roller assembly gives the unit its self-launching design, guiding the anchor smoothly in and out over the bow. Polyurethane bumpers cushion the anchor during docking for silent operation, reducing the clank and vibration common with rigid rollers. A bail keeps the anchor rode contained as it runs, while extended tabs hold the anchor securely in the down position when it is stowed, preventing shifting while underway. All roller parts and hardware are stainless steel, so the unit is built to hold up in both freshwater and saltwater environments.\u003c\/p\u003e\u003cp\u003eInstallation requires 5\/16 inch stainless steel mounting bolts, which are not included, and installation instructions are available for download. The roller measures 21.3 inches by 7.3 inches by 7.3 inches and weighs 8 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e TRAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 69062\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Anchor Roller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666996102625\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 21.3 inches x 7.3 inches x 7.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel parts and hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Anchor Weight:\u003c\/strong\u003e 44 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Boat Length:\u003c\/strong\u003e 40 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Types Supported:\u003c\/strong\u003e Delta, fluke, and other style anchors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Winches:\u003c\/strong\u003e Big Water, Titan, or any winch or windlass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware Required:\u003c\/strong\u003e 5\/16 inch stainless steel mounting bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBumper Material:\u003c\/strong\u003e Polyurethane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Suitability:\u003c\/strong\u003e Freshwater and saltwater\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum anchor weight the TRAC 69062 anchor roller can handle?\u003c\/strong\u003e The TRAC Self-Launching Anchor Roller (69062) is designed for delta, fluke, and other style anchors up to 44 lbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is this anchor roller meant for?\u003c\/strong\u003e The TRAC 69062 is intended for boats up to 40 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the TRAC 69062 come with mounting bolts?\u003c\/strong\u003e No, the TRAC Self-Launching Anchor Roller requires 5\/16 inch stainless steel mounting bolts that are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich winches work with the TRAC Self-Launching Anchor Roller?\u003c\/strong\u003e It can be used with Big Water, Titan, or any other winch or windlass, since the TRAC 69062 is not limited to a single winch brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the TRAC 69062 anchor roller made of?\u003c\/strong\u003e The roller uses stainless steel parts and hardware, with polyurethane bumpers for docking, making the 69062 suited to marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the TRAC 69062 be used in saltwater?\u003c\/strong\u003e Yes, the TRAC Self-Launching Anchor Roller is suitable for both freshwater and saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the self-launching feature work on part number 69062?\u003c\/strong\u003e A tilting anchor roller assembly guides the anchor smoothly during deployment and retrieval, giving the TRAC 69062 its self-launching design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps the anchor secure once it is stowed?\u003c\/strong\u003e Extended tabs on the TRAC 69062 hold the anchor safely in the down position when stowed, while a bail keeps the rode contained.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the TRAC 69062 dock quietly compared to a rigid roller?\u003c\/strong\u003e Polyurethane bumpers built into the TRAC Self-Launching Anchor Roller cushion the anchor during docking for silent operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the TRAC 69062 anchor roller?\u003c\/strong\u003e The TRAC 69062 measures 21.3 inches by 7.3 inches by 7.3 inches and weighs 8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre installation instructions available for the TRAC Self-Launching Anchor Roller?\u003c\/strong\u003e Yes, installation instructions for the TRAC 69062 are available for download.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the TRAC 69062 anchor roller?\u003c\/strong\u003e The UPC for the TRAC Self-Launching Anchor Roller is 666996102625.\u003c\/p\u003e","brand":"Trac Outdoor","offers":[{"title":"Default Title","offer_id":49028251418843,"sku":"TRC-69062","price":204.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/69062__33601.1722486365.500.750.jpg?v=1785165637"},{"product_id":"worth-anchormate-ii-bow-fixture-replacement-bow-mount-part-7536","title":"Worth AnchorMate II Bow Fixture Replacement Bow Mount, Part 7536","description":"\u003cp\u003eThe Worth AnchorMate II Bow Fixture (part 7536) is a replacement bow mount built for the Worth AnchorMate II Anchor Control System. It serves as the forward mounting point that guides and holds the anchor line when the system is not deployed, and its unique pivot arm eases the anchor up and over the front roller as it is retrieved, adding a margin of safety by allowing the anchor to store horizontally rather than hanging vertically off the bow.\u003c\/p\u003e\u003cp\u003eUnlike fixed bow mounts that require a specific hull profile, this fixture can be installed on any flat surface, giving boat owners flexibility in where they position the mount relative to their bow rail, deck, or hull shape. It is built from heavy gauge steel and finished with an electrostatic powder coated paint finish for corrosion and weather resistance in a marine environment.\u003c\/p\u003e\u003cp\u003eThis listing is for the bow fixture only, intended as a direct replacement part for boats already equipped with the Worth AnchorMate II system, or to replace a worn or damaged original fixture.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Worth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7536\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e AnchorMate II Bow Fixture\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Heavy gauge steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Electrostatic powder coated paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Mounts onto any flat surface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 033709075369\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for use with the Worth AnchorMate II Anchor Control System.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Worth AnchorMate II Bow Fixture used for?\u003c\/strong\u003e The Worth AnchorMate II Bow Fixture (part 7536) is the bow-mounted component of the AnchorMate II Anchor Control System, guiding and holding the anchor line at the front of the boat and easing the anchor over the front roller as it is retrieved.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this bow fixture fit my boat?\u003c\/strong\u003e Part 7536 mounts onto any flat surface, so it is not limited to a specific hull shape, though it is designed specifically for use with the Worth AnchorMate II Anchor Control System rather than the original AnchorMate system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the complete AnchorMate II system or just the bow fixture?\u003c\/strong\u003e This listing is for the bow fixture only, part number 7536, intended as a replacement part for an existing Worth AnchorMate II system rather than a complete kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the AnchorMate II Bow Fixture made from?\u003c\/strong\u003e It is constructed of heavy gauge steel with an electrostatic powder coated paint finish, giving it corrosion resistance for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Worth AnchorMate II Bow Fixture weigh?\u003c\/strong\u003e Part 7536 weighs 1.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes the AnchorMate II Bow Fixture different from the original AnchorMate Bow Fixture?\u003c\/strong\u003e The AnchorMate II Bow Fixture has a unique pivot arm that eases the anchor up and over the front roller, allowing horizontal anchor storage for added safety, and it mounts onto any flat surface rather than only fitting hull corners or sterns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this bow fixture be mounted on the stern instead of the bow?\u003c\/strong\u003e The Worth AnchorMate II Bow Fixture, part 7536, mounts onto any flat surface, giving flexibility in mounting location on the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with part 7536?\u003c\/strong\u003e The listing covers the AnchorMate II Bow Fixture itself; check your specific order details for whether mounting hardware is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Worth AnchorMate II Bow Fixture a genuine Worth part?\u003c\/strong\u003e Yes, part 7536 is a genuine Worth-branded replacement bow fixture made for the AnchorMate II Anchor Control System.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the pivot arm on this bow fixture improve safety?\u003c\/strong\u003e The pivot arm on the AnchorMate II Bow Fixture eases the anchor up and over the front roller so it can be stored horizontally, reducing the risk associated with an anchor hanging vertically off the bow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AnchorMate II Bow Fixture include the anchor reel?\u003c\/strong\u003e No, part 7536 is the bow fixture only; the anchor reel is a separate component of the AnchorMate II Anchor Control System.\u003c\/p\u003e","brand":"Worth Company","offers":[{"title":"Default Title","offer_id":49029705171163,"sku":"WOR-07536","price":52.71,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/07536__99395.1722501117.500.750.jpg?v=1785165856"},{"product_id":"windline-pm-1-rail-mount-anchor-bracket-for-7-8-inch-and-1-inch-rails-stainless-steel","title":"Windline PM-1 Rail Mount Anchor Bracket for 7\/8 Inch and 1 Inch Rails, Stainless Steel","description":"\u003cp\u003eThe Windline PM-1 is a rail-mount anchor bracket designed to stow Danforth and Fortress type anchors securely on your boat's rail or pulpit. Its patented design mounts on both 7\/8 inch and 1 inch diameter rails, holding the anchor with the flukes facing downward so lines cannot snag on the stowed anchor while underway. The bracket grips the anchor firmly during transit yet allows for a quick release when it is time to drop anchor, making it a practical solution for boaters who want their anchor ready and out of the way without deck clutter.\u003c\/p\u003e\u003cp\u003eBuilt from stainless steel, the PM-1 is constructed to withstand the marine environment and resist corrosion from saltwater exposure. It is a straightforward add-on for boats with standard round rail or pulpit mounting points, giving Danforth and Fortress style anchors a dedicated, secure home on deck.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Windline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PM-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rail mount anchor bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Rail Sizes:\u003c\/strong\u003e 7\/8 inch and 1 inch rails or pulpit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Anchor Types:\u003c\/strong\u003e Danforth and Fortress type anchors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Orientation:\u003c\/strong\u003e Flukes downward\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat anchors does the Windline PM-1 bracket work with?\u003c\/strong\u003e The Windline PM-1 is designed to stow Danforth and Fortress type anchors, holding them securely against the rail or pulpit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size rail does this anchor bracket fit?\u003c\/strong\u003e It mounts on both 7\/8 inch and 1 inch diameter rails or pulpit, covering the two most common rail sizes found on boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich way does the anchor face when stowed in the PM-1?\u003c\/strong\u003e The bracket holds the anchor with the flukes facing downward, which prevents lines from snagging on the stowed anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Windline PM-1 easy to release when I need to drop anchor?\u003c\/strong\u003e Yes, the PM-1's patented design grips the anchor securely during transit but allows for a quick release when it is time to deploy it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Windline PM-1 anchor bracket made from?\u003c\/strong\u003e It is made from stainless steel, providing corrosion resistance for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Windline PM-1 weigh?\u003c\/strong\u003e The PM-1 anchor bracket weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the PM-1 be mounted on a pulpit instead of a rail?\u003c\/strong\u003e Yes, the Windline PM-1 mounts on both rails and pulpits, as long as the mounting point is 7\/8 inch or 1 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Windline PM-1 anchor bracket come with mounting hardware?\u003c\/strong\u003e The dossier for the PM-1 does not specify included mounting hardware, so check with the retailer if this detail is required before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the PM-1 fit a Fortress anchor?\u003c\/strong\u003e Yes, the Windline PM-1 is designed to stow Fortress type anchors as well as Danforth type anchors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Windline PM-1 a genuine Windline product?\u003c\/strong\u003e Yes, the PM-1 is manufactured by Windline and is identified by the part number PM-1.\u003c\/p\u003e","brand":"Windline","offers":[{"title":"Default Title","offer_id":49033324167387,"sku":"WIN-PM-1","price":66.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41L0pZgY8_L.jpg?v=1785244750"},{"product_id":"windline-pm-2-stainless-steel-anchor-bracket-for-7-8-or-1-inch-stanchion","title":"Windline PM-2 Stainless Steel Anchor Bracket for 7\/8 or 1 Inch Stanchion","description":"\u003cp\u003eThe Windline PM-2 is a stainless steel anchor bracket designed to stow Danforth and Fortress type anchors securely on a boat's stanchion. It mounts to any vertical stanchion measuring 7\/8 inch or 1 inch in diameter, giving boat owners a simple way to keep an anchor stored on deck without taking up cockpit or locker space.\u003c\/p\u003e\u003cp\u003eThe bracket's patented design grips the anchor firmly in place during transit while still allowing for quick release when the anchor needs to be deployed. Because it is made entirely from stainless steel, the PM-2 is built to resist corrosion in a marine environment, holding up to sun, salt spray, and repeated handling season after season.\u003c\/p\u003e\u003cp\u003eThis anchor bracket is a straightforward retrofit for boats that already have a suitable vertical stanchion in place, and it works specifically with Danforth and Fortress style anchors rather than other anchor designs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Windline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PM-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Anchor Bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStanchion Fit:\u003c\/strong\u003e 7\/8 inch or 1 inch vertical stanchion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Anchor Types:\u003c\/strong\u003e Danforth and Fortress type anchors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Vertical stanchion mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 798772100300\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat anchors does the Windline PM-2 bracket work with?\u003c\/strong\u003e The Windline PM-2 anchor bracket is designed to stow Danforth and Fortress type anchors, gripping them securely for transit while allowing quick release when needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size stanchion does the PM-2 mount to?\u003c\/strong\u003e It mounts to any vertical stanchion that is 7\/8 inch or 1 inch in diameter, making the PM-2 bracket compatible with common stanchion sizes found on many boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Windline PM-2 anchor bracket made from?\u003c\/strong\u003e The PM-2 is made from all stainless steel, giving it strong resistance to corrosion from salt water and marine weather exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the PM-2 anchor bracket weigh?\u003c\/strong\u003e The Windline PM-2 weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I release the anchor quickly in an emergency with this bracket?\u003c\/strong\u003e Yes, the PM-2's design grips the anchor securely during normal use but still allows for quick release when it needs to be deployed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the PM-2 work with other anchor styles besides Danforth and Fortress?\u003c\/strong\u003e The Windline PM-2 is specifically designed to stow Danforth and Fortress type anchors; other anchor styles are not covered by this bracket's fitment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs any hardware needed to mount the PM-2, or does it come as a complete unit?\u003c\/strong\u003e The PM-2 is a stainless steel bracket that mounts directly to a 7\/8 inch or 1 inch vertical stanchion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the PM-2 rust over time in saltwater use?\u003c\/strong\u003e Because the Windline PM-2 is built entirely from stainless steel, it is designed to resist rust and corrosion in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Windline PM-2 a genuine Windline product?\u003c\/strong\u003e Yes, the PM-2 is a genuine Windline anchor bracket, identified by its manufacturer part number PM-2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere on the boat should the PM-2 bracket be installed?\u003c\/strong\u003e The PM-2 is intended for mounting on any vertical stanchion measuring 7\/8 inch or 1 inch in diameter, positioning the anchor for convenient on-deck storage.\u003c\/p\u003e","brand":"Windline","offers":[{"title":"Default Title","offer_id":49033324232923,"sku":"WIN-PM-2","price":66.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31T5Vtu4YVL.jpg?v=1785244750"},{"product_id":"lewmar-swa-jack-plate-mounting-bracket-shallow-water-anchor-mount-black-or-white","title":"Lewmar SWA Jack Plate Mounting Bracket - Shallow Water Anchor Mount, Black or White","description":"\u003cp\u003eThe Lewmar SWA Jack Plate Mounting Bracket is the genuine OEM mounting point for Lewmar's Shallow Water Anchor (SWA) system. This jack-plate style bracket transfers the anchor's holding loads into the transom or mounting surface, giving the SWA unit a rigid, marine-grade platform to pivot and drive from. Whether you're fitting a new SWA installation or replacing a bent, corroded, or worn-out original bracket, this part restores factory fit and function without needing to source a full anchor kit.\u003c\/p\u003e\u003cp\u003eBuilt to handle repeated deployment and retrieval cycles in saltwater and freshwater environments, the bracket is finished for corrosion resistance and matches Lewmar's SWA hardware line dimensionally and structurally. It bolts in using the original mounting pattern, so installation follows the same steps as the factory bracket it replaces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Lewmar\u003c\/li\u003e\n\u003cli\u003eProduct Line: SWA Jack Plate Mounting Bracket\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.2 pounds\u003c\/li\u003e\n\u003cli\u003eMounting Style: Jack plate, bolt-on\u003c\/li\u003e\n\u003cli\u003eCompatibility: Lewmar SWA (Shallow Water Anchor) systems\u003c\/li\u003e\n\u003cli\u003eFinish\/Color: Black or White\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis bracket is offered in two finishes, Black and White, so you can match your boat's existing hardware and gelcoat color. Both finishes share identical dimensions, mounting pattern, and load rating, so the choice comes down to appearance only, not fit or performance. Confirm which color your current SWA hardware uses (or which you prefer for a new install) before ordering.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Black","offer_id":49047489478875,"sku":"LEW-2024028460","price":222.8,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":49047489511643,"sku":"LEW-2024028465","price":222.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_3b0a4198-28d3-4f01-a8aa-d5de2515d144.png?v=1785426479"},{"product_id":"anchorlift-self-launching-pivoting-bow-roller-16-5-to-17-length-models-90101-90102","title":"Anchorlift Self-Launching Pivoting Bow Roller, 16.5\" to 17\" Length, Models 90101-90102","description":"\u003cp\u003eThe Anchorlift Self-Launching Pivoting Bow Roller lets your anchor deploy and retrieve over the bow with minimal hand-guiding. Its pivoting head follows the anchor's shank as it rotates through launch and stow, keeping the anchor tracking straight and reducing hull scuffing and hang-ups on the bow platform. Built for boats from 20 to 100 feet, this roller line covers two body sizes so you can match the roller to your bow pulpit and anchor profile.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Anchorlift\u003c\/li\u003e\n\u003cli\u003eType: Self-Launching, Pivoting Head Bow Roller\u003c\/li\u003e\n\u003cli\u003eRecommended Boat Length: 20 feet to 100 feet\u003c\/li\u003e\n\u003cli\u003eLength range: 16.5 inches to 17 inches\u003c\/li\u003e\n\u003cli\u003eWidth range: 2.5 inches to 3 inches\u003c\/li\u003e\n\u003cli\u003eConstruction: Stainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis bow roller is available in two sizes: the Model 90101 at 16.5 inches long by 2.5 inches wide, and the Model 90102 at 17 inches long by 3 inches wide in stainless steel. Choose the size that matches your existing bow roller footprint and pulpit mounting width, and confirm clearance for your anchor's shank and flukes as it pivots through the roller. When in doubt, measure your current roller's mounting holes and overall length before ordering, or check your anchor manufacturer's fit guidance for your boat's length.\u003c\/p\u003e","brand":"Anchorlift","offers":[{"title":"90101 - 16.5\" x 2.5\"","offer_id":49049165299931,"sku":"ACL-90101","price":535.95,"currency_code":"USD","in_stock":true},{"title":"90102 - 17\" x 3\", Stainless Steel","offer_id":49049165332699,"sku":"ACL-90102","price":638.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31UqriIPFKL_3169e81f-f745-4a66-b8b8-260b9cb5f769.jpg?v=1785452818"},{"product_id":"windline-anchor-roller-mounts-urm-series-for-danforth-fortress-and-delta-anchors-boats-to-35-and-25-to-54","title":"Windline Anchor Roller Mounts - URM Series for Danforth, Fortress and Delta Anchors (Boats to 35' and 25' to 54')","description":"\u003cp\u003eThe Windline URM Series anchor roller mounts give Danforth, Fortress and Delta type anchors a wide, low-profile channel to ride in as they deploy and retrieve, keeping line and chain moving smoothly across the bow without chafe or snagging. Built to match boats from smaller cruisers up to large 54-foot vessels, the URM Series bolts to the bow platform or pulpit and provides a dedicated, secure resting point for the anchor so it stays clear of the hull and stem while underway.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Windline\u003c\/li\u003e\n\u003cli\u003eCompatible Anchor Types: Danforth, Fortress and Delta type anchors\u003c\/li\u003e\n\u003cli\u003eLine Capacity: Up to 1-1\/2 inch diameter\u003c\/li\u003e\n\u003cli\u003eChain Capacity: Up to 1\/2 inch\u003c\/li\u003e\n\u003cli\u003eDesign: Low-profile\u003c\/li\u003e\n\u003cli\u003eConstruction: Stainless steel components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eTwo mounts cover different boat sizes. The URM-3 Large Mount is rated for boats from 25 to 54 feet and is the choice for mid-size to larger vessels carrying heavier ground tackle. The URM-4 Mount is built in stainless steel for boats up to 35 feet, suiting smaller to mid-size boats that still need a dependable, secure anchor roller. Match your mount to your boat's length and anchor weight for the best fit.\u003c\/p\u003e","brand":"Windline","offers":[{"title":"URM-3 Large Mount, Boats 25' to 54'","offer_id":49049196265691,"sku":"WIN-URM-3","price":298.87,"currency_code":"USD","in_stock":false},{"title":"URM-4 Stainless Mount, Boats to 35'","offer_id":49049196298459,"sku":"WIN-URM-4","price":236.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/517PvyYYs0L_670ad0f2-196f-457e-8a06-5d2da655645d.jpg?v=1785453594"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/4696.jpg?v=1785356939","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-anchoring-mooring-anchoring-hardware-bow-rollers-anchor-mounts.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}