{"title":"Shackles, Swivels \u0026 Chain Stoppers","description":null,"products":[{"product_id":"sea-dog-048610-1-folding-d-ring-2-1-8-cast-316-stainless-steel-base-with-17-4ph-ring-3-500-lb-break-strength","title":"Sea-Dog Folding D-Ring 2-1\/8 Inch, 316 Stainless Steel Base, 3,500 lb Breaking Strength","description":"\u003cp\u003eThe Sea-Dog Folding D-Ring (048610-1) is a deck hardware fitting that folds flat against its base when not in use, keeping the D-ring out of the way and reducing snag hazards on deck. It is built for rigging and tie-down applications where a secure attachment point is needed but a permanently upright ring would be a tripping or snagging risk.\u003c\/p\u003e\u003cp\u003eThe base is investment cast from corrosion resistant 316 stainless steel, while the D-ring itself is made from 17-4 PH stainless steel for added strength and spring-back. A rubber gasket seats beneath the base to help seal the mounting surface. The base measures 2-1\/8 inches (dimension A) with a 1-3\/16 inch dimension B, a 1\/4 inch dimension C, a 7\/8 inch dimension D, and a 1-1\/2 inch fully raised dimension E. The unit has a rated breaking strength of 3,500 pounds. It installs with a 1\/4 inch flat head fastener (fastener not included), and each unit weighs 0.2 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 048610-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Folding D-Ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 Stainless Steel Base \/ 17-4 PH Stainless Steel D-Ring \/ Rubber Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 1-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking Strength:\u003c\/strong\u003e 3,500 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 1\/4 inch flat head (fastener not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Deck Plates and Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog Folding D-Ring used for?\u003c\/strong\u003e The Sea-Dog Folding D-Ring 048610-1 is used as an attachment point for rigging and tie-down applications on a boat or trailer, giving you a secure place to hook a line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the D-ring actually fold down?\u003c\/strong\u003e Yes, the D-ring on part number 048610-1 folds flat against its base when not in use, so it stays out of the way instead of standing upright as a permanent snag point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog Folding D-Ring made from?\u003c\/strong\u003e It has an investment cast 316 stainless steel base paired with a 17-4 PH stainless steel D-ring and a rubber gasket at the base, giving it corrosion resistance suited to marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the breaking strength of the 048610-1 D-ring?\u003c\/strong\u003e The Sea-Dog Folding D-Ring 048610-1 is rated to a breaking strength of 3,500 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this D-ring?\u003c\/strong\u003e This folding D-ring measures 2-1\/8 inches at dimension A, 1-3\/16 inches at dimension B, 1\/4 inch at dimension C, 7\/8 inch at dimension D, and 1-1\/2 inches at dimension E when raised.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog Folding D-Ring weigh?\u003c\/strong\u003e The 048610-1 Folding D-Ring weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install it?\u003c\/strong\u003e The Sea-Dog Folding D-Ring 048610-1 installs with a 1\/4 inch flat head fastener; the fastener itself is not included with the D-ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many D-rings come in a pack?\u003c\/strong\u003e Sea-Dog packages the 048610-1 Folding D-Ring in a standard pack of 10 each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this D-ring rust resistant for saltwater use?\u003c\/strong\u003e Yes, the 048610-1 base is cast from 316 stainless steel and the D-ring itself is 17-4 PH stainless steel, both chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a larger version of this folding D-ring?\u003c\/strong\u003e Sea-Dog offers this style of folding D-ring in more than one size; 048610-1 is the 2-1\/8 inch, 3,500 pound breaking strength version, so confirm the part number matches the size and rating you need before ordering.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544598235,"sku":"S-D-048610-1","price":22.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7482.jpg?v=1784421862"},{"product_id":"sea-dog-048620-1-folding-d-ring-316-stainless-steel-4-000-lb-breaking-strength-1-4-d-ring","title":"Sea-Dog Folding D-Ring 048620-1, 316 Stainless Steel, 4,000 lb Breaking Strength","description":"\u003cp\u003eThe Sea-Dog Folding D-Ring (048620-1) is a compact stainless steel tie-down point designed to keep fittings out of the way when not in use. The base is investment cast from corrosion resistant 316 stainless steel, while the D-ring itself is 17-4 PH stainless steel for added strength, and a rubber gasket seals the mount against water intrusion. When not needed, the D-ring folds flat against the base for a low profile that will not snag lines, feet, or gear crossing the deck; when needed, it lifts up to provide a secure attachment point rated to a 4,000 pound breaking strength.\u003c\/p\u003e\u003cp\u003eThis D-ring is intended for deck and hardware applications where a flush, corrosion resistant tie-down or lashing point is required, such as securing gear, lines, or covers. It installs with four 1\/4 inch flat head fasteners, which are not included. The unit measures 1-3\/16 inches by 1-3\/8 inches at the base, with a ring opening of 1 inch and additional dimensions of 1\/4 inch, 9\/16 inch, and 1-1\/4 inch across its various features, and weighs 0.26 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 048620-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast 316 Stainless Steel Base, 17-4 PH Stainless Steel D-Ring, Rubber Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 1-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension F:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking Strength:\u003c\/strong\u003e 4,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.26 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Requirement:\u003c\/strong\u003e Four 1\/4 inch flat head fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514048163\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal deck hardware fitting and is not model or engine specific.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog Folding D-Ring 048620-1 made of?\u003c\/strong\u003e It is made from a corrosion resistant, investment cast 316 stainless steel base paired with a 17-4 PH stainless steel D-ring and a rubber gasket for sealing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the breaking strength of this D-ring?\u003c\/strong\u003e The Sea-Dog 048620-1 Folding D-Ring is rated to a 4,000 pound breaking strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need special fasteners to install the 048620-1?\u003c\/strong\u003e Installation requires four 1\/4 inch flat head fasteners, which are not included with the D-ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included in the box?\u003c\/strong\u003e No, the four 1\/4 inch flat head fasteners needed to mount the 048620-1 are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog Folding D-Ring weigh?\u003c\/strong\u003e This D-ring weighs 0.26 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 048620-1 D-ring?\u003c\/strong\u003e The base measures 1-3\/16 inches by 1-3\/8 inches, with a ring opening of 1 inch and additional feature dimensions of 1\/4 inch, 9\/16 inch, and 1-1\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a folding D-ring used for?\u003c\/strong\u003e A folding D-ring like the Sea-Dog 048620-1 provides a flush-mount tie-down or lashing point that folds flat against the deck when not in use, keeping the fitting out of the way and reducing snag hazards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 048620-1 D-ring suitable for saltwater environments?\u003c\/strong\u003e Yes, the corrosion resistant 316 stainless steel base and 17-4 PH stainless steel D-ring are designed to hold up in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many D-rings come in a package?\u003c\/strong\u003e The Sea-Dog 048620-1 Folding D-Ring is packed 5 to a standard pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the D-ring fold down flush with the mounting surface?\u003c\/strong\u003e Yes, the D-ring on part number 048620-1 folds down flat against its base so it does not protrude when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a larger version of this folding D-ring available?\u003c\/strong\u003e Sea-Dog also makes a larger Folding D-Ring, part number 048625-1, as a separate SKU for heavier-duty applications; the 048620-1 is the standard 4,000 pound rated size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the rubber gasket on the 048620-1 do?\u003c\/strong\u003e The rubber gasket seals the base of the Sea-Dog Folding D-Ring against the mounting surface to help keep water out of the fastener holes.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544631003,"sku":"S-D-048620-1","price":29.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7055.jpg?v=1784421869"},{"product_id":"sea-dog-081200-1-pad-eye-5-16-forged-304-stainless-steel-pair-deck-tie-down-block-attachment-point","title":"Sea-Dog Pad Eye 081200-1, 5\/16 Inch Loop, Forged 304 Stainless Steel, Pair","description":"\u003cp\u003eThe Sea-Dog Pad Eye 081200-1 is a forged 304 stainless steel deck fitting designed to give you a strong, corrosion-resistant tie-down or attachment point on a boat, dock, or trailer. It is commonly used for block attachments, controlling a lead line, or creating a secure tie-down point for gear, fenders, or accessories. Because it is forged rather than cast, the pad eye offers excellent strength for its size and holds up well in the marine environment without rusting or pitting over time.\u003c\/p\u003e\u003cp\u003eThis pad eye features a 5\/16 inch loop with a 3\/8 inch base width and an overall length of 1-3\/8 inches, sized for use with #8 flat head fasteners (fasteners not included, sold separately). It is sold as a pair, giving you two matching pad eyes for symmetrical installations such as mounting points on either side of a hatch, deck box, or gear tie-down location. The low-profile forged design keeps the fitting compact while still providing a secure loop for lines, hooks, or straps.\u003c\/p\u003e\u003cp\u003eConstructed entirely of corrosion-resistant forged 304 stainless steel, this pad eye is built to handle continuous exposure to saltwater, sun, and marine hardware stress without weakening or discoloring like lower-grade cast fittings.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 081200-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Pad Eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Forged 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoop Height (A):\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width (B):\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (C):\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #8 Flat Head (fasteners not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.056 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e Sold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 081200-1 pad eye used for?\u003c\/strong\u003e The Sea-Dog 081200-1 is used for block attachments, controlling a lead line, or creating a secure tie-down point on a boat or dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 081200-1 pad eye made from?\u003c\/strong\u003e It is made from forged 304 stainless steel, which resists corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 081200-1 pad eye forged or cast?\u003c\/strong\u003e It is forged, not cast, which gives the Sea-Dog 081200-1 greater strength for its size compared to cast fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pad eyes come in one order of 081200-1?\u003c\/strong\u003e The Sea-Dog 081200-1 is sold as a pair, so one order includes two matching pad eyes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size loop does the 081200-1 pad eye have?\u003c\/strong\u003e The loop height is 5\/16 inch, with a base width of 3\/8 inch and an overall length of 1-3\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners does the 081200-1 pad eye require?\u003c\/strong\u003e It installs with two #8 flat head fasteners, which are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 081200-1 pad eye weigh?\u003c\/strong\u003e Each Sea-Dog 081200-1 pad eye weighs 0.056 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 081200-1 pad eye rust over time?\u003c\/strong\u003e No, the forged 304 stainless steel construction of the 081200-1 resists rust and corrosion even with continuous saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 081200-1 pad eye be used to tie down kayaks or gear?\u003c\/strong\u003e Yes, the Sea-Dog 081200-1 can be used as a tie-down point for gear, fenders, and accessories, though larger-diameter rope applications may be better suited to Sea-Dog's higher-profile pad eye models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the fasteners included with the Sea-Dog 081200-1 pad eye?\u003c\/strong\u003e No, fasteners are not included; the 081200-1 requires two #8 flat head screws purchased separately.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988545155291,"sku":"S-D-081200-1","price":4.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7503.jpg?v=1784421986"},{"product_id":"sea-dog-080135-1-stern-eye-machined-304-stainless-steel-boat-tie-down-3-8-nc-thread-16-000-lb-breaking-strength","title":"Sea-Dog Stern Eye 080135-1, 3\/8 Inch, 16,000 lb Breaking Strength, 304 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog 080135-1 stern eye is a tie-down point designed to mount at the stern of a boat, giving you a secure attachment for dock lines, tow lines, or trailer tie-downs. It is built from machined 304 stainless steel for corrosion resistance in marine environments and uses a robust two-piece backing plate arrangement for added rigidity when bolted through the transom or hull. The 3\/8 inch shaft has rolled threads, which are stronger than cut threads of the same size, and the eye is secured with an adjustable finish nut rather than a crimped ring. That adjustable-nut design lets the eye be tightened, backed off, or serviced without destroying the fastener, which is an advantage over older crimp-ring style stern eyes that cannot be re-tensioned once installed. The unit carries a 16,000 pound breaking strength rating, making it suitable for demanding towing and mooring loads. Overall installed dimensions are 9 x 4 x 1 inches, with a smaller backing plate measuring 2-1\/4 inch x 3\/4 inch and a larger backing plate measuring 2-3\/4 inch x 1-1\/4 inch. The finish is polished stainless steel, matching other Sea-Dog deck hardware for a consistent look across the boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 080135-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener\/Shaft Size:\u003c\/strong\u003e 3\/8 inch NC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e Rolled Threads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking Strength:\u003c\/strong\u003e 16,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 9 x 4 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking Plate 1 Size:\u003c\/strong\u003e 2-1\/4 inch x 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking Plate 2 Size:\u003c\/strong\u003e 2-3\/4 inch x 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Adjustable Finish Nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.392 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514080125\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 080135-1 stern eye used for?\u003c\/strong\u003e It serves as a tie-down point at the stern of a boat, giving you a secure fitting for dock lines, tow lines, or trailer straps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the breaking strength of this stern eye?\u003c\/strong\u003e The Sea-Dog 080135-1 stern eye is rated at 16,000 pounds breaking strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 080135-1 stern eye made from?\u003c\/strong\u003e It is constructed of machined 304 stainless steel, chosen for its corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size shaft does this stern eye have?\u003c\/strong\u003e The 080135-1 uses a 3\/8 inch NC shaft with rolled threads, which are stronger than cut threads of the same diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this stern eye differ from crimp-style stern eyes?\u003c\/strong\u003e The 080135-1 uses an adjustable finish nut instead of a crimped ring, so it can be tightened or serviced after installation, unlike a crimp-ring stern eye that is fixed once formed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the backing plate dimensions on this stern eye?\u003c\/strong\u003e The 080135-1 uses two backing plates, one measuring 2-1\/4 inch x 3\/4 inch and a second measuring 2-3\/4 inch x 1-1\/4 inch, for added mounting rigidity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sea-Dog 080135-1 stern eye?\u003c\/strong\u003e The stern eye ships with its backing plates and an adjustable finish nut for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the overall size of this stern eye?\u003c\/strong\u003e Overall dimensions of the Sea-Dog 080135-1 are 9 x 4 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 080135-1 stern eye weigh?\u003c\/strong\u003e It weighs 0.392 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 080135-1 stern eye genuine Sea-Dog hardware?\u003c\/strong\u003e Yes, the 080135-1 is a genuine Sea-Dog part, part number 080135-1, made from machined 304 stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 080135-1 stern eye have?\u003c\/strong\u003e It has a polished stainless steel finish.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988545351899,"sku":"S-D-080135-1","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7497.jpg?v=1784422008"},{"product_id":"sea-dog-136590-1-swivel-eye-bolt-snap-die-cast-manganese-bronze-3-5-16-in","title":"Sea-Dog Swivel Eye Bolt Snap, Die Cast Manganese Bronze, 3-5\/16 Inch, Part 136590-1","description":"\u003cp\u003eThe Sea-Dog Swivel Eye Bolt Snap (part number 136590-1) is a marine-grade rigging hardware piece designed for tie-downs and other rigging applications aboard a boat. It is built from die cast manganese bronze for durability in a marine environment and finished in bronze. The snap features a spring-loaded bolt closure that seats securely and opens easily with a thumb lever, so it can be operated quickly with one hand while still holding fast under load. A 360 degree swivel strap eye is built into the design to reduce line and strap tangling during use, which keeps rigging lines running true instead of twisting back on themselves.\u003c\/p\u003e\u003cp\u003eThis snap measures 3-5\/16 inches at its A dimension, with additional reference dimensions of 7\/16 inch, 1\/2 inch, and 11\/16 inch at the B, C, and D points. It weighs 0.166 pounds. Because it is a general-purpose rigging snap rather than a part matched to a specific boat model or engine, it is suited to any tie-down, strap, or line application calling for a bronze swivel eye bolt snap of this size.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 136590-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Snaps \u0026amp; Shackles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Manganese Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 3-5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.166 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 7.88 x 3.88 x 0.88 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514136013\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog Swivel Eye Bolt Snap used for?\u003c\/strong\u003e The Sea-Dog Swivel Eye Bolt Snap, part number 136590-1, is designed for use as a tie-down or in other marine rigging applications where a secure, quick-release connection point is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is part 136590-1 made from?\u003c\/strong\u003e It is constructed of die cast manganese bronze with a bronze finish, giving the Sea-Dog Swivel Eye Bolt Snap durability suited to marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the closure mechanism work on this snap?\u003c\/strong\u003e A spring-loaded bolt provides secure closure, and an easy-open thumb lever lets you release the Sea-Dog Swivel Eye Bolt Snap without wrestling with the mechanism.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the eye on this snap swivel?\u003c\/strong\u003e Yes, the strap eye on part 136590-1 swivels a full 360 degrees, which reduces tangling of the line or strap it is attached to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog Swivel Eye Bolt Snap 136590-1?\u003c\/strong\u003e This snap measures 3-5\/16 inches at its A dimension, with 7\/16 inch, 1\/2 inch, and 11\/16 inch at the B, C, and D reference points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does part 136590-1 weigh?\u003c\/strong\u003e The Sea-Dog Swivel Eye Bolt Snap weighs 0.166 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this snap sold individually or in a pack?\u003c\/strong\u003e The standard pack for the 136590-1 swivel eye bolt snap is 10 each, though it can be purchased individually depending on how it is listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 136590-1 snap have?\u003c\/strong\u003e It has a bronze finish over its die cast manganese bronze construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog Swivel Eye Bolt Snap fitted to a specific boat model or engine?\u003c\/strong\u003e No, part 136590-1 is a general-purpose rigging snap and is not designated for a specific boat make, model, or engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall package dimensions for this item?\u003c\/strong\u003e The Sea-Dog Swivel Eye Bolt Snap 136590-1 has product dimensions of 7.88 x 3.88 x 0.88 inches.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988545450203,"sku":"S-D-136590-1","price":9.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7632.jpg?v=1784422023"},{"product_id":"sea-dog-136800-1-trigger-snap-die-cast-manganese-bronze-2-9-16-in-with-360-degree-swivel-eye","title":"Sea-Dog Trigger Snap 136800-1 Manganese Bronze, 2-9\/16 Inch Overall Length","description":"\u003cp\u003eThe Sea-Dog Trigger Snap 136800-1 is a die cast manganese bronze snap hook built for marine and industrial rigging applications. It uses an overlapping hinged snap hook design that closes tighter under load, so the connection stays secure as tension increases rather than loosening. A spring-loaded bolt provides the closing force while an easy-open thumb lever lets you release the snap with one hand when you need to disconnect quickly. The strap eye swivels a full 360 degrees, which keeps lines, straps, and tethers from twisting and tangling during use.\u003c\/p\u003e\u003cp\u003eThis trigger snap measures 2-9\/16 inches overall with a 1\/2 inch eye and is finished in bronze throughout. It is constructed entirely of die cast manganese bronze for corrosion resistance in a marine environment, and it is sold individually. Typical uses include securing lines, fenders, straps, and other rigging where a quick-release connection is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 136800-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Manganese Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 2-9\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye Inside Diameter:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional Dimension:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.108 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e Snap Hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Groove Diameter:\u003c\/strong\u003e 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Diameter:\u003c\/strong\u003e 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514136471\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the overall length of the Sea-Dog 136800-1 trigger snap?\u003c\/strong\u003e The Sea-Dog 136800-1 trigger snap measures 2-9\/16 inches overall, with a 1\/2 inch eye inside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this trigger snap made from?\u003c\/strong\u003e It is constructed of die cast manganese bronze, chosen for corrosion resistance in marine environments, and finished in bronze.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the trigger snap close and stay secure?\u003c\/strong\u003e A spring-loaded bolt closes the hook, and the overlapping hinged design closes tighter under load so the connection does not loosen as tension increases.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I open the snap with one hand?\u003c\/strong\u003e Yes, the Sea-Dog 136800-1 has an easy-open thumb lever that lets you release the snap hook with one hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the eye rotate or swivel?\u003c\/strong\u003e Yes, the strap eye on this trigger snap swivels a full 360 degrees, which reduces tangling of lines and straps during use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 136800-1 sold as a single unit or in a pack?\u003c\/strong\u003e This trigger snap is sold individually, though it is packed in standard quantities of 10 each for stocking purposes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of this trigger snap?\u003c\/strong\u003e The Sea-Dog 136800-1 trigger snap weighs 0.108 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is this trigger snap suited for?\u003c\/strong\u003e Marine and industrial rigging applications, including securing lines, straps, fenders, and similar connections that need a quick-release hardware point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the eye diameter compatible with 1\/2 inch hardware?\u003c\/strong\u003e Yes, the Sea-Dog 136800-1 has a 1\/2 inch eye inside diameter, matching a 0.5 inch compatible groove diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this snap hook corrode in saltwater use?\u003c\/strong\u003e The manganese bronze construction and bronze finish are intended to resist corrosion, making the 136800-1 suitable for marine environments.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988545581275,"sku":"S-D-136800-1","price":11.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7207.jpg?v=1784422045"},{"product_id":"sea-dog-139133-1-swivel-eye-boat-snap-size-3-4-1-2-sand-cast-brass-marine-rigging-snap-hook","title":"Sea-Dog Swivel Eye Boat Snap 139133-1, Size 3, Brass, 4-1\/2 Inch Overall Length","description":"\u003cp\u003eThe Sea-Dog 139133-1 is a size 3 swivel eye boat snap built for medium duty marine rigging. A spring-loaded latch allows quick, one-handed attachment and release, while the 360 degree swivel eye lets the line or shackle rotate freely so it will not twist or tangle during use. The snap is constructed of sand cast brass and finished with a polished surface, giving it both a functional, corrosion-resistant working life and a decorative gold-toned appearance suitable for visible rigging points.\u003c\/p\u003e\u003cp\u003eThis is the largest of the Sea-Dog swivel eye snap sizes, with an overall length of 4-1\/2 inches, making it suited for heavier lines, larger shackle connections, and rigging points that call for a bigger working snap than the smaller size 1 or size 2 versions. It is sold as a single unit and is a universal fit item rather than a vehicle- or engine-specific replacement part, so it can be used anywhere a swivel eye snap of this size and duty rating is called for on deck hardware, flags, fenders, or general rigging.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 139133-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Swivel Eye Boat Snap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSnap Size:\u003c\/strong\u003e Size 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Sand cast brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 4-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.27 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514139076\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 139133-1 swivel eye boat snap?\u003c\/strong\u003e The Sea-Dog 139133-1 is the size 3 swivel eye boat snap, with an overall length of 4-1\/2 inches, making it the largest in the swivel eye snap lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this boat snap made of?\u003c\/strong\u003e It is made of sand cast brass with a polished finish, which gives the Sea-Dog 139133-1 both corrosion resistance and a decorative gold-toned appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the eye of this snap swivel?\u003c\/strong\u003e Yes, the 139133-1 has a 360 degree swivel eye that rotates freely to reduce line twist and tangling during rigging use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this snap sold as a single piece or in a pack?\u003c\/strong\u003e The Sea-Dog 139133-1 is sold per each as one unit, not as a multi-pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the overall length and eye\/body sizing of the 139133-1 snap?\u003c\/strong\u003e This size 3 snap measures 4-1\/2 inches overall, with a secondary dimension of 9\/16 inch and a body dimension of 3\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 139133-1 a specific vehicle or engine fitment part?\u003c\/strong\u003e No, it is a universal fit rigging snap rather than an engine- or drive-specific replacement part, so it is not tied to a particular boat make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the latch on this snap work?\u003c\/strong\u003e The 139133-1 uses a spring-loaded latch that opens for quick attachment and closes automatically to secure the connection during medium duty rigging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does this snap have?\u003c\/strong\u003e It has a polished brass finish that appears gold in color, suited to rigging points where appearance matters as well as function.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this swivel eye snap typically used for?\u003c\/strong\u003e The Sea-Dog 139133-1 is designed for medium duty marine rigging applications, such as connecting lines, flags, fenders, or other deck hardware where a rotating attachment point is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 139133-1 boat snap weigh?\u003c\/strong\u003e This size 3 Sea-Dog swivel eye snap weighs 0.27 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog 139133-1 different from the smaller swivel eye snap sizes?\u003c\/strong\u003e The 139133-1 is the size 3 version, which is larger and heavier than the size 1 and size 2 swivel eye snaps in the same brass, spring-loaded, swivel-eye design.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988546826459,"sku":"S-D-139133-1","price":10.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7637_b865d23c-7d2a-4036-bd1c-54d7980bf5cf.jpg?v=1784422086"},{"product_id":"sea-dog-fast-eye-boat-snap-size-1-2-7-8-in-316-stainless-steel-spring-latch-snap-hook","title":"Sea-Dog Fast Eye Boat Snap 146121-1, Size 1, 316 Stainless Steel, 2-7\/8 Inch","description":"\u003cp\u003eThe Sea-Dog Fast Eye Boat Snap (part number 146121-1) is a Size 1 spring-loaded snap hook built from investment cast 316 stainless steel for corrosion resistance in marine environments. It features a fast eye design with a spring-loaded latch that opens easily for quick attachment and release, making it well suited to medium duty rigging applications. Boaters commonly use this snap for tethers, paddle leashes, and other light-duty connection points where a dependable, corrosion resistant fastener is needed.\u003c\/p\u003e\u003cp\u003eConstructed as a single investment cast piece rather than stamped or welded components, the Fast Eye Boat Snap resists the pitting and rust that can affect lower grades of stainless steel when exposed to saltwater. The fixed (non-swivel) eye is sized at 7\/16 inch with a 5\/8 inch opening, and the overall snap measures 2-7\/8 inch. This Size 1 snap is one of several sizes Sea-Dog offers in the Fast Eye Boat Snap line, allowing buyers to match the hardware to the load and hole size required for their rigging.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 146121-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Fast Eye Boat Snap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 2-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye Dimension (B):\u003c\/strong\u003e 7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening Dimension (C):\u003c\/strong\u003e 5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch Type:\u003c\/strong\u003e Spring-loaded fast eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Medium duty rigging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.106 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514146029\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 146121-1 Fast Eye Boat Snap?\u003c\/strong\u003e It is the Size 1 version of Sea-Dog's Fast Eye Boat Snap line, measuring 2-7\/8 inch overall with a 7\/16 inch eye and a 5\/8 inch opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 146121-1 snap made from?\u003c\/strong\u003e Sea-Dog makes part 146121-1 from investment cast 316 stainless steel, which resists corrosion and pitting in saltwater and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a swivel eye or fixed eye snap?\u003c\/strong\u003e The 146121-1 is a fast eye style, meaning the eye is fixed rather than swiveling; Sea-Dog also offers a separate swivel eye boat snap line for applications where 360-degree rotation is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Fast Eye Boat Snap used for?\u003c\/strong\u003e Sea-Dog designed the Fast Eye Boat Snap, including part 146121-1, for medium duty rigging applications and for handy uses like tethers and paddle leashes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the latch on the 146121-1 boat snap open?\u003c\/strong\u003e The snap uses a spring-loaded latch that depresses for quick, one-handed attachment and release.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 146121-1 boat snap weigh?\u003c\/strong\u003e This Fast Eye Boat Snap weighs 0.106 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the overall length of part 146121-1?\u003c\/strong\u003e The overall size of the 146121-1 Fast Eye Boat Snap is 2-7\/8 inch, corresponding to Sea-Dog's Size 1 designation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill 146121-1 hold up in saltwater use?\u003c\/strong\u003e Yes, because it is investment cast from 316 stainless steel, a grade chosen specifically for its corrosion resistance in marine and saltwater conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sea-Dog offer other sizes of this boat snap?\u003c\/strong\u003e Yes, the Fast Eye Boat Snap is available in multiple sizes beyond the Size 1 version covered by part 146121-1, with larger sizes offering larger eye and opening dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Fast Eye and Swivel Eye Sea-Dog snaps?\u003c\/strong\u003e The Fast Eye Boat Snap, such as part 146121-1, has a fixed eye, while Sea-Dog's Swivel Eye Boat Snap line adds a 360-degree swivel eye to reduce line tangling; both are cast from 316 stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for this Sea-Dog boat snap?\u003c\/strong\u003e The manufacturer part number is 146121-1, Sea-Dog's Size 1 Fast Eye Boat Snap.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988546924763,"sku":"S-D-146121-1","price":6.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7651.jpg?v=1784422103"},{"product_id":"sea-dog-147056-1-bow-shackle-1-4-inch-screw-pin-316-stainless-steel","title":"Sea-Dog 316 Stainless Steel Bow Shackle, 1\/4 Inch Pin, Screw Pin Anchor Shackle 147056-1","description":"\u003cp\u003eThe Sea-Dog 147056-1 is an investment-cast 316 stainless steel bow shackle designed for marine rigging applications where quick, repeated connecting and disconnecting is needed. Its rounded bow shape accommodates multiple attachment angles, making it suited to anchor rodes, rigging hardware, and general deck hardware connections. The shackle uses a screw pin closure, allowing it to be opened and closed by hand without tools for fast removal and reattachment.\u003c\/p\u003e\u003cp\u003eConstruction is investment-cast 316 stainless steel throughout, giving the shackle corrosion resistance for saltwater and marine environments. The pin diameter (A) measures 1\/4 inch, with a bail width (B) of 1\/2 inch, a body length (C) of 13\/16 inch, and an overall length (D) of 1-1\/16 inch. Note that this cast shackle is not load rated, so it should be selected for general-purpose rigging and hardware connection rather than load-bearing lifting applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 147056-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Screw Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Diameter (A):\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBail Width (B):\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Length (C):\u003c\/strong\u003e 13\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (D):\u003c\/strong\u003e 1-1\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.078 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Rating:\u003c\/strong\u003e Not load rated (cast construction)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514147125\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pin diameter of the Sea-Dog 147056-1 bow shackle?\u003c\/strong\u003e The pin diameter is 1\/4 inch, with a bail width of 1\/2 inch, a body length of 13\/16 inch, and an overall length of 1-1\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this bow shackle made from?\u003c\/strong\u003e The Sea-Dog 147056-1 is made of investment cast 316 stainless steel, which resists corrosion in saltwater and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 147056-1 shackle load rated?\u003c\/strong\u003e No, this is a cast shackle and is not load rated, so it should be used for general rigging and hardware connections rather than rated lifting applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the pin on this shackle open and close?\u003c\/strong\u003e It uses a screw pin closure, which threads open and closed by hand for quick, repeated connecting and disconnecting during rigging tasks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 147056-1 bow shackle weigh?\u003c\/strong\u003e The shackle weighs 0.078 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a bow shackle used for on a boat?\u003c\/strong\u003e A bow shackle has a rounded bow shape suited to many rigging applications, such as connecting anchor rodes or attaching deck hardware where fast, repeated connect and disconnect is useful.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the screw pin require tools to open?\u003c\/strong\u003e No, the screw pin closure on the Sea-Dog 147056-1 can be opened and closed by hand without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this shackle rust or corrode in saltwater?\u003c\/strong\u003e It is built from investment cast 316 stainless steel, which is corrosion resistant and suited to saltwater marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 147056-1 shackle?\u003c\/strong\u003e Overall length is 1-1\/16 inch, with a body length of 13\/16 inch, a bail width of 1\/2 inch, and a 1\/4 inch pin diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this shackle sold as a single unit?\u003c\/strong\u003e Yes, the Sea-Dog 147056-1 bow shackle is sold as an individual unit.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988546957531,"sku":"S-D-147056-1","price":3.31,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7659.jpg?v=1784422116"},{"product_id":"sea-dog-147058-1-bow-shackle-5-16-inch-316-stainless-steel-screw-pin-anchor-shackle-for-marine-rigging","title":"Sea-Dog 5\/16 Inch Bow Shackle, Cast 316 Stainless Steel, Screw Pin Closure - 147058-1","description":"\u003cp\u003eThe Sea-Dog 147058-1 is a 5\/16 inch Bow Shackle built from investment cast 316 stainless steel, giving it strong resistance to marine corrosion in saltwater and freshwater environments alike. Its rounded bow shape suits a wide range of rigging applications, from attaching lines and hardware to general deck and rigging connections. The shackle uses a screw pin closure, which lets you thread the pin in and out by hand for quick removal and reattachment, making it well suited to jobs where you need to connect and disconnect gear repeatedly rather than leave a fixed connection in place.\u003c\/p\u003e\u003cp\u003eThis shackle measures 5\/16 inch across the pin diameter, 5\/8 inch across the inside width, 1-1\/8 inch across the inside length, and 1-7\/16 inch overall. Because it is investment cast rather than forged, it is not load rated, so it should be selected for general rigging and hardware connection use rather than for load-bearing or safety-critical lifting applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 147058-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bow Shackle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Screw pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Diameter:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Width:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Length:\u003c\/strong\u003e 1-1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 1-7\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.174 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5.81 x 3.88 x 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514147132\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 147058-1 Bow Shackle?\u003c\/strong\u003e The 147058-1 has a 5\/16 inch pin diameter, a 5\/8 inch inside width, a 1-1\/8 inch inside length, and measures 1-7\/16 inch overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 147058-1 shackle made from?\u003c\/strong\u003e It is investment cast from 316 stainless steel, which resists corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 147058-1 Bow Shackle load rated?\u003c\/strong\u003e No. Sea-Dog does not load rate its cast shackles, so the 147058-1 should be used for general rigging and hardware connections rather than load-bearing lifting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the pin on this shackle work?\u003c\/strong\u003e The Sea-Dog 147058-1 uses a screw pin closure that threads in and out by hand, allowing quick connection and disconnection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this shackle weigh?\u003c\/strong\u003e The Sea-Dog 147058-1 Bow Shackle weighs 0.174 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape is the Sea-Dog 147058-1 shackle?\u003c\/strong\u003e It has a rounded bow shape, suited to a variety of rigging applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 147058-1 shackle rust or corrode on a boat?\u003c\/strong\u003e 316 stainless steel construction gives the 147058-1 strong resistance to corrosion in saltwater and freshwater marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Sea-Dog 147058-1 Bow Shackle has UPC 035514147132.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this bow shackle and a forged D-shackle?\u003c\/strong\u003e The 147058-1 is an investment cast bow shackle and is not load rated, while Sea-Dog's forged 316 stainless D-shackles carry a stated breaking strength (B.S.) rating, making the forged design the choice when a rated working load is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is the 147058-1 shackle best suited for?\u003c\/strong\u003e Its screw pin closure makes the Sea-Dog 147058-1 well suited to rigging tasks that require fast or repeated connecting and disconnecting.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988546990299,"sku":"S-D-147058-1","price":5.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7659_2d8c277a-0028-4e51-bc92-bb5e3bbea7f8.jpg?v=1784422119"},{"product_id":"sea-dog-147060-1-bow-shackle-3-8-screw-pin-anchor-shackle-investment-cast-316-stainless-steel","title":"Sea-Dog Bow Shackle 147060-1, 3\/8 Inch Pin, Investment Cast 316 Stainless Steel Screw Pin Shackle","description":"\u003cp\u003eThe Sea-Dog 147060-1 Bow Shackle is a 3\/8 inch pin stainless steel shackle built for general-purpose marine rigging, anchoring, and hardware connections. Its rounded bow shape accepts a wider range of attachment angles than a straight D-shackle, making it a versatile choice wherever lines, chains, or fittings need a secure but removable connection point.\u003c\/p\u003e\u003cp\u003eThe shackle body is investment cast from 316 stainless steel, a marine-grade alloy chosen for its resistance to corrosion in saltwater environments. A screw pin closure allows the shackle to be opened and closed by hand without tools, which makes it well suited for rigging tasks where the shackle is connected and disconnected repeatedly, such as swapping fenders, securing anchors, or attaching rigging hardware.\u003c\/p\u003e\u003cp\u003eBecause this shackle is investment cast rather than forged, it is not load rated and should be used for general connection and rigging purposes rather than applications requiring a certified working load or breaking strength rating. It is sold individually (each).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 147060-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bow Shackle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 Stainless Steel (Investment Cast)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Screw Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Diameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional Body Dimensions:\u003c\/strong\u003e 13\/16 inch x 1-3\/8 inch x 1-13\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Rating:\u003c\/strong\u003e Not load rated (cast construction)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Sold each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514147149\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 147060-1 Bow Shackle?\u003c\/strong\u003e The 147060-1 Bow Shackle has a 3\/8 inch pin diameter, with body dimensions of 13\/16 inch x 1-3\/8 inch x 1-13\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this shackle made from?\u003c\/strong\u003e It is made from investment cast 316 stainless steel, a corrosion resistant marine-grade alloy suited to saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 147060-1 load rated?\u003c\/strong\u003e No. As an investment cast shackle rather than a forged one, the 147060-1 is not load rated and should be used for general rigging and connection purposes, not certified load-bearing applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the pin open and close?\u003c\/strong\u003e The 147060-1 uses a screw pin closure, allowing it to be threaded open and closed by hand for quick, repeated connecting and disconnecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this shackle sold as a single piece or in a set?\u003c\/strong\u003e The Sea-Dog 147060-1 Bow Shackle is sold each, as a single shackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between a bow shackle and a D-shackle?\u003c\/strong\u003e A bow shackle like the 147060-1 has a rounded body shape that accommodates a wider range of attachment angles, while Sea-Dog's forged D-shackles have a straighter profile and carry a stated breaking strength rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this shackle rust in saltwater?\u003c\/strong\u003e It is built from 316 stainless steel, which is chosen specifically for its corrosion resistance in marine and saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the 147060-1 shackle?\u003c\/strong\u003e The Sea-Dog 147060-1 Bow Shackle weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does this shackle have?\u003c\/strong\u003e It has a silver stainless steel finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is this bow shackle suited for?\u003c\/strong\u003e With its rounded shape and screw pin closure, the 147060-1 is designed for general rigging applications, including anchoring and hardware attachment where fast, repeated connecting and disconnecting is needed.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988547055835,"sku":"S-D-147060-1","price":33.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7659_b77bcff3-a45d-470a-936d-539e816a211e.jpg?v=1784422125"},{"product_id":"sea-dog-147806-1-screw-pin-anchor-bow-shackle-1-4-hot-dip-galvanized-drop-forged-steel","title":"Sea-Dog 147806-1 Screw Pin Anchor Shackle, Galvanized Steel, 1\/4 Inch","description":"\u003cp\u003eThe Sea-Dog 147806-1 is a 1\/4 inch screw pin anchor shackle built from hot dip galvanized drop forged steel. Its rounded bow shape is designed to handle loads applied from many different directions, making it a dependable connector for anchoring and mooring setups. The screw pin closure threads in and out by hand, allowing quick, repeated connecting and disconnecting without tools, which is useful when swapping rigging or breaking down ground tackle at the end of a trip.\u003c\/p\u003e\u003cp\u003eThis shackle is most commonly used to join an anchor to mooring chain or rode, a role its forged construction and galvanized coating are built to hold up to. The hot dip galvanizing process coats the drop forged steel body to resist the corrosion that comes with constant exposure to saltwater and marine air, while the drop forging process gives the shackle body added strength compared to cast alternatives. At 1\/4 inch, this shackle size suits smaller anchors and lighter ground tackle setups where a compact, easy to handle connector is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 147806-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShackle Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Hot Dip Galvanized Drop Forged Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Screw Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5.81 x 1.55 x 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.096 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514147026\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Snaps \u0026amp; Shackles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a general-purpose 1\/4 inch anchor shackle intended for anchoring and mooring applications; it is not restricted to a specific boat make or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 147806-1 anchor shackle?\u003c\/strong\u003e The Sea-Dog 147806-1 is a 1\/4 inch screw pin anchor shackle, measuring 5.81 x 1.55 x 0.75 inches overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this shackle made of?\u003c\/strong\u003e It is made of hot dip galvanized drop forged steel, giving the 147806-1 both the strength of forged construction and corrosion resistance for saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the screw pin close on this shackle?\u003c\/strong\u003e A threaded screw pin closure is used, letting the pin be turned in and out by hand for quick, repeated connecting and disconnecting without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 147806-1 shackle typically used for?\u003c\/strong\u003e It is used to join an anchor to mooring chain or rode, and works well for general anchor kit and ground tackle connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this shackle weigh?\u003c\/strong\u003e The Sea-Dog 147806-1 weighs 0.096 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this shackle rated for saltwater use?\u003c\/strong\u003e Yes, the hot dip galvanized coating on the 147806-1 is applied specifically to resist corrosion in saltwater and marine air.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 147806-1 fit a specific boat make or model?\u003c\/strong\u003e No, this is a general-purpose 1\/4 inch anchor shackle and is not limited to a particular boat make, model, or engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this shackle handle loads from different directions?\u003c\/strong\u003e Yes, its rounded bow shape is designed to handle load applied from many different directions rather than a single pull axis.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 147806-1 forged or cast?\u003c\/strong\u003e It is drop forged, not cast, which is why Sea-Dog uses forged construction for added strength in this shackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the part number 147806-1 refer to?\u003c\/strong\u003e 147806-1 is the Sea-Dog manufacturer part number for the single 1\/4 inch galvanized screw pin anchor shackle described here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this shackle come with a cross-reference or OEM equivalent number?\u003c\/strong\u003e No OEM cross-reference or replacement number is listed for the Sea-Dog 147806-1; it is sold under its own Sea-Dog part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the pin removable for inspection or replacement?\u003c\/strong\u003e Yes, the screw pin on the 147806-1 threads out fully, allowing the shackle to be opened for inspection or removed from its connection point.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988547121371,"sku":"S-D-147806-1","price":2.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7669.jpg?v=1784422143"},{"product_id":"sea-dog-147062-1-bow-shackle-1-2-in-316-stainless-steel-screw-pin-anchor-shackle-for-marine-rigging","title":"Sea-Dog Line 316 Stainless Steel Screw Pin Bow Shackle, 1\/2 Inch Pin - 147062-1","description":"\u003cp\u003eThe Sea-Dog Line 147062-1 is a screw pin bow shackle built for rigging tasks where you need to connect and disconnect hardware quickly and repeatedly. Its rounded bow shape gives it a wider range of use than a straight-sided shackle, making it a common choice for anchor chain connections, rigging points, and general marine hardware attachment. The screw pin closure lets you thread the pin in and out by hand for fast removal without tools, which is useful for gear that gets swapped or serviced often.\u003c\/p\u003e\u003cp\u003eThis shackle is constructed of investment cast 316 stainless steel, a corrosion resistant alloy suited to saltwater and marine environments. Because it is a cast shackle, Sea-Dog does not assign it a load rating, so the 147062-1 should be used for general rigging and hardware connection rather than load-critical or lifting applications. It carries a 1\/2 inch pin size and is sold with a standard pack quantity of 10 shackles per pack from the manufacturer, though it is available for purchase individually.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog Line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 147062-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bow Shackle (Screw Pin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Screw Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Diameter:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional Dimensions (B x C x D):\u003c\/strong\u003e 1 inch x 1-11\/16 inch x 2-5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.508 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Rating:\u003c\/strong\u003e Not load rated (cast shackle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Standard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514147156\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog Line 147062-1 shackle?\u003c\/strong\u003e The 147062-1 has a 1\/2 inch pin diameter, with additional body dimensions of 1 inch, 1-11\/16 inch, and 2-5\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this shackle load rated for lifting?\u003c\/strong\u003e No. The 147062-1 is an investment cast 316 stainless steel shackle, and Sea-Dog does not assign a load rating or breaking strength to its cast shackles, so it should not be used for load-critical or lifting applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 147062-1 bow shackle made from?\u003c\/strong\u003e It is made of investment cast 316 stainless steel, a corrosion resistant alloy suited to saltwater and marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the pin close on this shackle?\u003c\/strong\u003e The 147062-1 uses a screw pin closure that threads in and out by hand, allowing quick connection and disconnection without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a bow shackle typically used for?\u003c\/strong\u003e Bow shackles like the Sea-Dog 147062-1 have a rounded body shape that suits a range of rigging connections, including anchor chain attachment, where a wider connection angle is needed compared to a straight-sided shackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 147062-1 weigh?\u003c\/strong\u003e The Sea-Dog Line 147062-1 bow shackle weighs 0.508 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this shackle resist rust and corrosion?\u003c\/strong\u003e Yes, the 316 stainless steel construction of the 147062-1 provides corrosion resistance for marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many shackles come in a pack?\u003c\/strong\u003e Sea-Dog's standard manufacturer pack for the 147062-1 is 10 shackles, though single-unit purchase is available.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 147062-1 be used for anchor rigging?\u003c\/strong\u003e It can be used for anchor chain and general rigging connections, but since it is not load rated, it is not intended for lifting or load-critical applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 147062-1 cast or forged stainless steel?\u003c\/strong\u003e The 147062-1 bow shackle is investment cast 316 stainless steel, not forged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this bow shackle and a D-shackle?\u003c\/strong\u003e The 147062-1 bow shackle has a rounded body shape and is not load rated, while Sea-Dog's forged D-shackles have straight sides with a U-shaped bottom and carry a stated breaking strength rating.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988547154139,"sku":"S-D-147062-1","price":12.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7659_d3b9f36c-2aa2-40c2-8833-f361bbda6139.jpg?v=1784422150"},{"product_id":"sea-dog-147808-1-screw-pin-anchor-shackle-5-16-in-galvanized-drop-forged-steel","title":"Sea-Dog Screw Pin Anchor Bow Shackle, 5\/16 Inch, Hot Dipped Galvanized Steel, Part 147808-1","description":"\u003cp\u003eThe Sea-Dog 147808-1 is a 5\/16 inch screw pin anchor bow shackle built for joining an anchor to mooring chain or for use in anchor kits. Its rounded bow shape suits a wide range of rigging applications, and the screw pin closure allows quick, repeated connecting and disconnecting without special tools, unlike a permanently swaged or riveted connector. This makes it a practical choice for boaters who need to attach or detach ground tackle regularly rather than leave it fixed in place.\u003c\/p\u003e\u003cp\u003eThe shackle is constructed of drop forged steel that is hot dipped galvanized, a finish and forming process that gives it the strength for rigging duty along with a coating suited to the corrosion exposure of a marine environment. For boaters who want a non-ferrous alternative for extended saltwater exposure, a stainless steel version of this shackle style is also available as a separate part.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 147808-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Screw Pin Anchor Bow Shackle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShackle Size:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Drop forged steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hot dipped galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Screw pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.148 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514147033\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 147808-1 anchor shackle?\u003c\/strong\u003e The Sea-Dog 147808-1 is a 5\/16 inch screw pin anchor bow shackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this shackle galvanized?\u003c\/strong\u003e Yes, the 147808-1 is made of drop forged steel that is hot dipped galvanized for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a screw pin anchor shackle used for?\u003c\/strong\u003e It is used to join an anchor to mooring chain or rope, and is common in anchor kits where a secure but removable connection is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 147808-1 shackle weigh?\u003c\/strong\u003e This Sea-Dog anchor shackle weighs 0.148 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you open and close the shackle?\u003c\/strong\u003e The 147808-1 uses a screw pin closure, so the pin threads in and out by hand for quick, repeated connecting and disconnecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this shackle in saltwater?\u003c\/strong\u003e The hot dipped galvanized finish on the 147808-1 is suited to marine use; a stainless steel version of this shackle style is also available for buyers who prefer a non-ferrous option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog part?\u003c\/strong\u003e Yes, this is the Sea-Dog branded 5\/16 inch screw pin anchor shackle, part number 147808-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this shackle come as a single unit or a pack?\u003c\/strong\u003e The 147808-1 is a single 5\/16 inch shackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the shackle body shape?\u003c\/strong\u003e The 147808-1 has a rounded bow shape, which is the standard anchor shackle profile used for connecting anchors and chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 147808-1 made from?\u003c\/strong\u003e It is constructed of drop forged steel with a hot dipped galvanized coating.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988547186907,"sku":"S-D-147808-1","price":2.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7669_b46fb2fc-14b9-4bbb-88f0-ae55679e97ad.jpg?v=1784422153"},{"product_id":"sea-dog-147810-1-screw-pin-anchor-bow-shackle-3-8-in-galvanized-drop-forged-steel-with-7-16-in-pin","title":"Sea-Dog Screw Pin Anchor Shackle, 3\/8 Inch, Hot Dipped Galvanized Steel","description":"\u003cp\u003eThe Sea-Dog 147810-1 is a 3\/8 inch screw pin anchor shackle built for joining an anchor to mooring chain or for use in anchor kits and general rigging. The rounded bow shape and screw pin closure allow for quick removal, making this shackle a practical choice for connections that need to be made and broken repeatedly, whether that means swapping anchors, changing out chain, or servicing ground tackle. The screw pin design lets you thread the pin in and out by hand without tools, speeding up dockside and on-water work.\u003c\/p\u003e\u003cp\u003eConstruction is hot dipped drop forged galvanized steel, giving the shackle the strength needed for anchoring loads along with a corrosion-resistant finish suited to a marine environment. At 0.286 pounds, it is easy to handle and stow as a spare in an anchor locker or rigging bag. Each shackle ships as a single unit measuring 5.81 x 3.88 x 1.5 inches.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 147810-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Hot Dipped Galvanized Steel, Drop Forged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.286 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5.81 x 3.88 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Screw Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514147040\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 147810-1 anchor shackle?\u003c\/strong\u003e The 147810-1 is a 3\/8 inch screw pin anchor shackle, sized to match 3\/8 inch anchor chain and similar ground tackle hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this shackle galvanized?\u003c\/strong\u003e Yes, the Sea-Dog 147810-1 is hot dipped galvanized after being drop forged, giving it a corrosion-resistant finish for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the shackle made of?\u003c\/strong\u003e It is made of drop forged steel with a hot dipped galvanized coating, which provides both structural strength and rust resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 147810-1 shackle weigh?\u003c\/strong\u003e This shackle weighs 0.286 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this shackle?\u003c\/strong\u003e The Sea-Dog 147810-1 measures 5.81 x 3.88 x 1.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a screw pin shackle used for?\u003c\/strong\u003e A screw pin shackle like the 147810-1 is used to join an anchor to mooring chain, and its threaded pin allows quick connection and disconnection without special tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the screw pin require tools to open?\u003c\/strong\u003e No, the pin on the 147810-1 threads in and out by hand, which is why it is favored for rigging jobs that require repeated connecting and disconnecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many shackles come in a package?\u003c\/strong\u003e The Sea-Dog 147810-1 ships with a package quantity of 1 shackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 147810-1 shackle suitable for anchor kits?\u003c\/strong\u003e Yes, this 3\/8 inch screw pin anchor shackle is commonly used in anchor kits to connect the anchor to the chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with this shackle?\u003c\/strong\u003e The Sea-Dog 147810-1 anchor shackle carries UPC 035514147040.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988547317979,"sku":"S-D-147810-1","price":2.87,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7669_78639649-e47e-4812-9504-e6451bddc80a.jpg?v=1784422174"},{"product_id":"sea-dog-151580-1-snap-hook-3-1-8-in-316-stainless-steel-1400-lb-breaking-strength","title":"Sea-Dog Stainless Steel Snap Hook 151580-1, 5\/16 Inch Size, 3-1\/8 Inch Overall Length","description":"\u003cp\u003eThe Sea-Dog 151580-1 is a formed 316 stainless steel snap hook designed for quick, secure attachment to ropes, chains, straps, and small diameter cable. It uses an interlocking, spring-loaded gate that snaps closed automatically once clipped onto a fixing point, making it well suited for rigging and anchoring applications aboard a boat where a fast, reliable connection is needed. The 5\/16 inch size snap hook has an overall length of 3-1\/8 inches and is rated to a breaking strength of 1,400 pounds. Because it is constructed of formed 316 stainless steel, it resists corrosion from saltwater and marine environments, holding up to repeated use in exposed rigging, anchor lines, and general boat hardware applications. This snap hook is part of a graduated size range from Sea-Dog, so boaters can match the hook size to the diameter of the line or chain being used.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 151580-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Snaps \u0026amp; Shackles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Corrosion Resistant, Formed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Size:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 3-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 7\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking Strength:\u003c\/strong\u003e 1,400 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.164 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514151078\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 151580-1 snap hook?\u003c\/strong\u003e The Sea-Dog 151580-1 is the 5\/16 inch nominal size snap hook, with an overall length of 3-1\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this snap hook made from?\u003c\/strong\u003e The Sea-Dog 151580-1 is made of formed 316 stainless steel, which resists corrosion in saltwater and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can the 151580-1 snap hook hold?\u003c\/strong\u003e It has a rated breaking strength of 1,400 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this snap hook used for?\u003c\/strong\u003e The 151580-1 is used for quick attachment to ropes, chains, straps, and small diameter cable in rigging and anchoring applications on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the gate on this snap hook work?\u003c\/strong\u003e The Sea-Dog 151580-1 features an interlocking, spring-loaded gate that closes automatically for quick attachment to a fixing point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 151580-1 snap hook weigh?\u003c\/strong\u003e The Sea-Dog 151580-1 snap hook weighs 0.164 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 151580-1 snap hook rust resistant?\u003c\/strong\u003e Yes, it is constructed of corrosion resistant formed 316 stainless steel, suitable for continued marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 151580-1 snap hook?\u003c\/strong\u003e The UPC for this snap hook is 035514151078.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre other sizes of this snap hook available?\u003c\/strong\u003e Yes, Sea-Dog offers this snap hook in a graduated size range including 3\/16 inch, 1\/4 inch, 5\/16 inch (151580-1), 3\/8 inch, and 7\/16 inch versions, each with a different length and breaking strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 151580-1 packaged?\u003c\/strong\u003e The standard pack quantity for the 151580-1 snap hook is 10 each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this snap hook be used with chain as well as rope?\u003c\/strong\u003e Yes, the Sea-Dog 151580-1 is designed for use with ropes, chains, straps, and small diameter cable.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988547416283,"sku":"S-D-151580-1","price":5.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7681.jpg?v=1784422187"},{"product_id":"sea-dog-151605-1-snap-hook-with-eye-insert-316-stainless-steel-3-15-16-2000-lb-breaking-strength","title":"Sea-Dog Snap Hook with Eye Insert 151605-1, 3-15\/16 Inch, 2000 lb Breaking Strength, 316 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog 151605-1 is a snap hook with an integral eye insert, built for quick attachment to a wide range of fixing points aboard your boat. Its interlocking, spring-loaded gate snap opens easily for one-handed connection and locks closed to keep your line or hardware securely fastened. The eye insert built into the body gives you a dedicated attachment point for fishing lines, mooring buoys, and other rigging where a fixed loop is needed alongside the snap action.\u003c\/p\u003e\u003cp\u003eThis snap hook is constructed of formed 316 stainless steel, chosen for its resistance to corrosion in saltwater and marine environments, so it holds up to repeated exposure without rusting or seizing. It carries a breaking strength of 2000 lbs, giving it the load capacity for demanding rigging, anchoring, and mooring applications. The overall length is 3-15\/16 inches, making it sized for medium-duty rigging tasks where a compact but strong connector is needed.\u003c\/p\u003e\u003cp\u003eUse the 151605-1 for general-purpose rigging, anchoring, and mooring line attachment wherever a secure, corrosion-resistant snap with a built-in eye is required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 151605-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Snap Hook with Eye Insert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Formed 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 3-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking Strength:\u003c\/strong\u003e 2000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.314 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514151108\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the breaking strength of the Sea-Dog 151605-1 snap hook?\u003c\/strong\u003e The Sea-Dog 151605-1 snap hook with eye insert has a breaking strength of 2000 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 151605-1 snap hook made of?\u003c\/strong\u003e It is made of formed 316 stainless steel, which resists corrosion in saltwater and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Sea-Dog 151605-1 snap hook?\u003c\/strong\u003e The overall length is 3-15\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 151605-1 weigh?\u003c\/strong\u003e This snap hook weighs 0.314 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the eye insert on the 151605-1 used for?\u003c\/strong\u003e The integral eye insert on the Sea-Dog 151605-1 provides a fixed attachment point for use on fishing lines and mooring buoys, in addition to the spring-loaded snap gate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 151605-1 gate spring-loaded?\u003c\/strong\u003e Yes, the 151605-1 features an interlocking, spring-loaded gate snap for quick attachment to fixing points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog 151605-1 snap hook?\u003c\/strong\u003e It is gray, the natural finish of the formed 316 stainless steel construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is the 151605-1 snap hook suited for?\u003c\/strong\u003e The Sea-Dog 151605-1 is intended for rigging and anchoring applications, including attaching to fishing lines and mooring buoys.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in a pack of the 151605-1?\u003c\/strong\u003e The Sea-Dog 151605-1 is sold as a single piece.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Sea-Dog 151605-1 corrode in saltwater?\u003c\/strong\u003e No, it is constructed of corrosion resistant formed 316 stainless steel, making it suitable for saltwater marine use.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988547514587,"sku":"S-D-151605-1","price":8.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7682.jpg?v=1784422202"},{"product_id":"sea-dog-155630-1-spring-hook-4-1-16-in-electro-galvanized-steel-snap-hook-1-200-lb-breaking-strength","title":"Sea-Dog Spring Hook 155630-1, 4-1\/16 Inch, 1,200 lb Breaking Strength, Electro-Galvanized Steel","description":"\u003cp\u003eThe Sea-Dog Spring Hook 155630-1 is a spring-loaded connector built for quick, one-handed hookups wherever a secure, releasable connection is needed aboard a boat or around the dock. The spring-loaded gate opens under light thumb pressure and snaps closed automatically, letting you clip and unclip lines, fenders, covers, and gear without tying or untying knots. It is rated to a 1,200 pound breaking strength, making it suitable for a range of load-bearing and utility applications beyond light-duty tie-downs.\u003c\/p\u003e\u003cp\u003eConstruction is electro-galvanized formed mild steel, a plating process that coats the steel in zinc to resist corrosion in wet and salt-air marine environments while keeping the hook strong enough for its rated load. The hook measures 4-1\/16 inches overall (dimension A), with a width of 1 inch (dimension B) and an opening dimension of 1\/2 inch (dimension C), and weighs 0.262 pounds. It ships in a standard pack quantity of 10 each, making it a practical choice for shops and boat owners who need multiples on hand.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 155630-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Electro-Galvanized Formed Mild Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking Strength:\u003c\/strong\u003e 1,200 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (Overall Length):\u003c\/strong\u003e 4-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C (Opening):\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.262 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514155014\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a general-purpose marine hardware item with no engine, model, or year-specific fitment.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are published for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the breaking strength of the Sea-Dog Spring Hook 155630-1?\u003c\/strong\u003e The Sea-Dog Spring Hook 155630-1 is rated to a breaking strength of 1,200 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 155630-1 spring hook made from?\u003c\/strong\u003e It is constructed of electro-galvanized formed mild steel, which resists corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is the Sea-Dog Spring Hook 155630-1?\u003c\/strong\u003e The Sea-Dog Spring Hook 155630-1 measures 4-1\/16 inches overall, with a width of 1 inch and an opening of 1\/2 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 155630-1 spring hook weigh?\u003c\/strong\u003e This spring hook weighs 0.262 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the spring hook 155630-1 close?\u003c\/strong\u003e It uses a spring-loaded closure that opens under light pressure and snaps shut automatically, allowing quick connection and release without tying knots.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat quantity does the Sea-Dog Spring Hook 155630-1 come in?\u003c\/strong\u003e The Sea-Dog Spring Hook 155630-1 is sold in a standard pack of 10 each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog Spring Hook 155630-1 corrosion resistant?\u003c\/strong\u003e Yes, its electro-galvanized formed mild steel construction is designed to resist corrosion in wet and salt-air conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog Spring Hook 155630-1?\u003c\/strong\u003e The UPC for the Sea-Dog Spring Hook 155630-1 is 035514155014.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Sea-Dog Spring Hook 155630-1 and the Malleable Utility Snap Hook 155812-1?\u003c\/strong\u003e The Spring Hook 155630-1 is electro-galvanized formed mild steel rated to 1,200 pounds breaking strength, while the Malleable Utility Snap Hook 155812-1 is nickel-plated malleable cast steel rated to 2,000 pounds; they are separate parts for different load requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat can the Sea-Dog Spring Hook 155630-1 be used for?\u003c\/strong\u003e Its 1,200 pound breaking strength and spring-loaded gate make the 155630-1 suitable for a variety of applications requiring a secure, quick-release connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 155630-1 spring hook require tools to install?\u003c\/strong\u003e No tools are required; the spring-loaded gate on the 155630-1 opens by hand pressure to attach it to a line, ring, or fitting.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988547547355,"sku":"S-D-155630-1","price":3.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7689.jpg?v=1784422203"},{"product_id":"sea-dog-155841-1-mooring-snap-hook-nickel-plated-cast-steel-1-600-lb-breaking-strength-3-15-16-in","title":"Sea-Dog Mooring Snap Hook 155841-1, Nickel Plated Cast Steel, 1,600 lb Breaking Strength","description":"\u003cp\u003eThe Sea-Dog Mooring Snap Hook (155841-1) is a spring-loaded snap hook built for quick, secure mooring connections on boats and docks. It is cast from malleable steel and finished with a nickel plating that resists corrosion in wet marine environments, making it suitable for everyday use around saltwater and freshwater docks alike. The spring-loaded gate opens easily with one hand and closes automatically to keep lines, chains, or fenders securely attached without the connection working loose.\u003c\/p\u003e\u003cp\u003eThis snap hook is rated for a breaking strength of 1,600 pounds, giving it the holding capacity needed for mooring lines, fender lines, and other dockside rigging where a dependable, quick-release connection point is required. It measures 3-15\/16 inches in overall length with a 9\/16 inch opening and a 3\/4 inch dimension across the eye, sizing it for standard mooring line and shackle hardware. At 0.262 pounds, it is light enough to handle easily while still built from solid cast steel for long-term durability.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 155841-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Mooring Snap Hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Nickel Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (Overall Length):\u003c\/strong\u003e 3-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B (Opening Width):\u003c\/strong\u003e 9\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking Strength:\u003c\/strong\u003e 1,600 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.262 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514155052\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the breaking strength of the Sea-Dog Mooring Snap Hook 155841-1?\u003c\/strong\u003e The Sea-Dog Mooring Snap Hook 155841-1 has a breaking strength of 1,600 pounds, making it suitable for mooring lines and other dockside rigging that need a dependable holding capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 155841-1 mooring snap hook made from?\u003c\/strong\u003e It is made of malleable cast steel with a nickel plated finish, giving the Sea-Dog Mooring Snap Hook corrosion resistance for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 155841-1 snap hook?\u003c\/strong\u003e The 155841-1 measures 3-15\/16 inches in overall length, with a 9\/16 inch opening width and a 3\/4 inch dimension across the eye.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog Mooring Snap Hook weigh?\u003c\/strong\u003e This mooring snap hook weighs 0.262 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 155841-1 snap hook spring-loaded?\u003c\/strong\u003e Yes, the Sea-Dog Mooring Snap Hook 155841-1 features a spring-loaded closure that opens with light pressure and snaps shut automatically for a secure connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this snap hook typically used for?\u003c\/strong\u003e It is used for mooring applications such as securing mooring lines, fender lines, and other dockside connections where a quick-release, spring-loaded hook is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 155841-1 corrode in saltwater?\u003c\/strong\u003e The nickel plated finish on the Sea-Dog 155841-1 is designed to resist corrosion, making it suitable for saltwater and freshwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog Mooring Snap Hook packaged?\u003c\/strong\u003e The 155841-1 mooring snap hook is supplied in a standard pack of 10 each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for this Sea-Dog mooring snap hook?\u003c\/strong\u003e The manufacturer part number is 155841-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the snap hook come with any warnings?\u003c\/strong\u003e The Sea-Dog Mooring Snap Hook 155841-1 carries a California Proposition 65 warning related to cancer and reproductive harm, as required for products sold in California.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988547580123,"sku":"S-D-155841-1","price":7.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7693.jpg?v=1784422215"},{"product_id":"sea-dog-156100-1-galvanized-steel-snap-hook-3-8-in-x-3-15-16-in-1-600-lb-breaking-strength","title":"Sea-Dog Galvanized Steel Snap Hook 156100-1, 3\/8 Inch, 1,600 lb Breaking Strength","description":"\u003cp\u003eThe Sea-Dog 156100-1 is a 3\/8 inch galvanized steel snap hook built for quick, secure attachment to ropes, chains, straps, and small diameter cable. It features an interlocking, spring-loaded gate snap that opens easily with one hand and locks closed to keep your line, chain, or strap connected under load. This design makes it well suited to a wide range of rigging and anchoring applications aboard a boat or around the dock, from securing fenders and dock lines to general-purpose rigging tasks.\u003c\/p\u003e\u003cp\u003eConstruction is electro-galvanized formed mild steel, which provides corrosion protection for use in marine environments. The snap hook is rated for a breaking strength of 1,600 pounds, giving it the holding capacity needed for anchoring and rigging duty beyond light-duty household hooks. It measures 3-15\/16 inches in overall length with a 3\/8 inch wire diameter, sized to work with small to mid-size diameter rope, chain, and strap hardware. The 156100-1 is sold as a single unit and is part of the Sea-Dog line of formed steel snap hooks offered in multiple sizes to match different rope, chain, and cable diameters.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 156100-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Electro-galvanized formed mild steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Diameter (A):\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (B):\u003c\/strong\u003e 3-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking Strength:\u003c\/strong\u003e 1,600 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.308 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514156035\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGate Type:\u003c\/strong\u003e Interlocking spring-loaded snap gate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Ropes, chains, straps, and small diameter cable for rigging and anchoring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rope or chain does the Sea-Dog 156100-1 snap hook work with?\u003c\/strong\u003e The 156100-1 has a 3\/8 inch wire diameter and is sized for use with ropes, chains, straps, and small diameter cable in that general range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the breaking strength of this snap hook?\u003c\/strong\u003e The Sea-Dog 156100-1 has a rated breaking strength of 1,600 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the snap hook made from?\u003c\/strong\u003e It is constructed of electro-galvanized formed mild steel, which provides corrosion protection for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the 156100-1 snap hook?\u003c\/strong\u003e This snap hook measures 3-15\/16 inches in overall length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the gate on the Sea-Dog snap hook work?\u003c\/strong\u003e The 156100-1 uses an interlocking, spring-loaded gate snap that opens for quick attachment and closes securely to hold the connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this snap hook sold individually or in a pack?\u003c\/strong\u003e The Sea-Dog 156100-1 is sold individually; it is packaged in a standard pack quantity of 10 units at the case level.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 156100-1 snap hook weigh?\u003c\/strong\u003e The Sea-Dog 156100-1 weighs 0.308 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is this snap hook suited for?\u003c\/strong\u003e It is intended for rigging and anchoring applications, including attaching to ropes, chains, straps, and small diameter cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other sizes available in this snap hook line?\u003c\/strong\u003e Yes, Sea-Dog offers this style of formed steel snap hook in several sizes with different wire diameters and breaking strengths; the 156100-1 is the 3\/8 inch, 1,600 pound version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this snap hook rust in saltwater use?\u003c\/strong\u003e The electro-galvanized formed mild steel construction of the 156100-1 is designed to provide corrosion protection, though as with any steel hardware it should be rinsed after saltwater exposure to maximize service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the snap hook come with a mounting eye or ring?\u003c\/strong\u003e The 156100-1 is a snap hook with its own attachment eye as part of its formed steel body; a separate mounting eye or ring is not included.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988547645659,"sku":"S-D-156100-1","price":3.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7694.jpg?v=1784422240"},{"product_id":"sea-dog-158006-1-galvanized-quick-link-1-4-in-4-400-lb-breaking-strength-chain-connector","title":"Sea-Dog 158006-1 Galvanized Quick Link, 1\/4 Inch, 4400 lb Breaking Strength","description":"\u003cp\u003eThe Sea-Dog 158006-1 is a 1\/4 inch galvanized quick link designed for fast, reusable connections between two lengths of chain or for attaching accessories directly to chain. It features a two-sided threaded link with a hex-shaped bolt body, allowing it to be opened and closed by hand or with a wrench for quick installation without special tools. This makes it a practical choice for chain repair, hanging hammocks, rigging restraining gates, and other applications where a removable connection is preferred over a permanent shackle or link.\u003c\/p\u003e\u003cp\u003eThe link is constructed of electro-galvanized formed mild steel, which provides a layer of corrosion protection suited to marine and outdoor environments. With a stock diameter of 1\/4 inch and an overall length of 2-1\/4 inches, it carries a rated breaking strength of 4,400 pounds, making it suitable for moderate-duty rigging and connection tasks. As a general-purpose connector, it is not manufactured to fit a specific boat, engine, or model and can be used anywhere a 1\/4 inch quick link of this size and load rating is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 158006-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStock Diameter (A):\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (B):\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth (C):\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJaw Opening (D):\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Diameter (E):\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking Strength:\u003c\/strong\u003e 4,400 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.088 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Electro-galvanized mild steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2.01 x 0.98 x 4.02 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5.75 x 1.75 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514158398\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size chain does the Sea-Dog 158006-1 quick link work with?\u003c\/strong\u003e The 158006-1 has a 1\/4 inch stock diameter and a 5\/16 inch jaw opening, sizing it for 1\/4 inch chain and similarly sized fittings or accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow strong is this quick link?\u003c\/strong\u003e It carries a rated breaking strength of 4,400 pounds, per Sea-Dog's published rating for the 158006-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the overall length of the 158006-1?\u003c\/strong\u003e It measures 2-1\/4 inches in overall length, with a stock diameter of 1\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the quick link made of?\u003c\/strong\u003e The Sea-Dog 158006-1 is made of electro-galvanized formed mild steel, which provides corrosion protection for outdoor and marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this quick link be opened and reused?\u003c\/strong\u003e Yes, the 158006-1 is a reusable and removable quick link with a two-sided thread and a hex-shaped bolt for easy opening and closing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this quick link typically used for?\u003c\/strong\u003e Common uses for the 158006-1 include chain repair, hanging hammocks, and rigging restraining gates, or any application needing a removable connection between chain lengths or accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 158006-1 differ from Sea-Dog's other quick link sizes?\u003c\/strong\u003e Sea-Dog offers this quick link in several sizes; the 158006-1 is the 1\/4 inch stock diameter version rated to 4,400 pounds, while larger and smaller versions in the same line have different dimensions and breaking strengths.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 158006-1 weigh?\u003c\/strong\u003e The Sea-Dog 158006-1 quick link weighs 0.088 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bolt or pin needed to open the quick link?\u003c\/strong\u003e No separate tool is required; the 158006-1 uses a hex-shaped threaded bolt body built into the link that can be turned open by hand or with a wrench.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 158006-1?\u003c\/strong\u003e Ordering the Sea-Dog 158006-1 includes one galvanized quick link unit.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988547711195,"sku":"S-D-158006-1","price":2.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7696.jpg?v=1784422249"},{"product_id":"sea-dog-158008-1-quick-link-5-16-in-galvanized-steel-chain-connecting-link-7-700-lb-breaking-strength","title":"Sea-Dog Quick Link 158008-1, 5\/16 Inch Wire, 7,700 lb Working Load, Galvanized Steel","description":"\u003cp\u003eThe Sea-Dog Quick Link 158008-1 is a reusable, removable connector built for fast, secure connections between two lengths of chain or for attaching accessories to chain. It features a two-sided threaded link with a hex-shaped bolt that opens and closes easily by hand or with a wrench, so it can be taken apart and reused rather than replaced after every use. This makes it a practical choice for chain repair, hanging hammocks, rigging restraining gates, and other general marine and outdoor connection tasks where a permanent link is not desired.\u003c\/p\u003e\u003cp\u003eThe 158008-1 is constructed of electro-galvanized formed mild steel, which provides a corrosion-resistant finish suited to marine and outdoor environments. It uses a 5\/16 inch wire size and carries a working load rating of 7,700 pounds, giving it enough strength for demanding chain and rigging applications. The link measures 2-15\/16 inches overall, matching common 5\/16 inch chain and hardware sizing, so it drops into existing chain runs without modification.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 158008-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Quick Link\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Size:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 2-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Load Limit:\u003c\/strong\u003e 7,700 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Electro-galvanized formed mild steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Electro-galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.192 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514158404\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the working load limit of the Sea-Dog Quick Link 158008-1?\u003c\/strong\u003e The Sea-Dog Quick Link 158008-1 has a working load rating of 7,700 pounds, making it suitable for demanding chain and rigging connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire size chain does the 158008-1 quick link fit?\u003c\/strong\u003e This quick link uses a 5\/16 inch wire size, matching standard 5\/16 inch chain and hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog Quick Link 158008-1 made from?\u003c\/strong\u003e It is constructed of electro-galvanized formed mild steel, which provides a corrosion-resistant finish for marine and outdoor use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 158008-1 quick link be reused?\u003c\/strong\u003e Yes, the Sea-Dog Quick Link 158008-1 is designed to be reusable and removable, with a hex-shaped bolt that opens and closes for repeated connection and disconnection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Sea-Dog Quick Link 158008-1?\u003c\/strong\u003e The 158008-1 measures 2-15\/16 inches overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 158008-1 quick link weigh?\u003c\/strong\u003e The Sea-Dog Quick Link 158008-1 weighs 0.192 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a quick link used for?\u003c\/strong\u003e A quick link is used for fast, secure connections between two lengths of chain or for attaching accessories to chain, such as in chain repair, hammock hanging, or restraining gate applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 158008-1 quick link open and close?\u003c\/strong\u003e The Sea-Dog Quick Link 158008-1 has a two-sided threaded connection with a hex-shaped bolt, allowing it to be opened and closed by hand or with a wrench.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog Quick Link 158008-1 corrosion resistant?\u003c\/strong\u003e Yes, the 158008-1 is finished with electro-galvanized coating over mild steel for corrosion protection in marine and outdoor environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many quick links come in a package?\u003c\/strong\u003e The Sea-Dog Quick Link 158008-1 is packed in a standard pack of 10 each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 158008-1 a permanent chain connector?\u003c\/strong\u003e No, it is a removable and reusable quick link rather than a permanent chain link, so it can be taken apart and reconnected as needed.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988547743963,"sku":"S-D-158008-1","price":2.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7696_79e5385d-a2d6-483c-a2d8-8c2875568861.jpg?v=1784422258"},{"product_id":"sea-dog-170006-1-heavy-duty-thimble-1-4-in-304-stainless-steel-carded-pair-for-wire-rope-and-running-rigging","title":"Sea-Dog Heavy Duty Thimble 1\/4 Inch Rope\/Wire, 304 Stainless Steel, Part 170006-1","description":"\u003cp\u003eThe Sea-Dog Heavy Duty Thimble, part number 170006-1, is a stamped 304 stainless steel fitting designed to protect wire or rope from direct contact with the load it is hoisting. Sized for 1\/4 inch line or wire, it sits inside an eye splice to keep the loop from being crushed under tension while reducing chafe and abrasion at the point of contact. This keeps the splice round, distributes load evenly around the bend, and extends the working life of running rigging, lifelines, and other rope or wire assemblies that see repeated load-bearing use aboard a boat.\u003c\/p\u003e\u003cp\u003eBecause it is built from 304 stainless steel, the thimble resists corrosion in the marine environment, standing up to saltwater spray and washdown without rusting or staining the surrounding line. The heavy duty stamped construction gives it the strength to hold its shape under load, maintaining a consistent eye shape splice after splice. It is a standard hardware item suited to any application calling for a 1\/4 inch thimble, including running rigging, lifelines, and general rope or cable terminations, and is available individually carded or in bulk packaging for outfitting multiple lines at once.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 170006-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Stamped, corrosion resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Rope\/Wire Diameter:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 1-1\/16 inch x 19\/32 inch x 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.046 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Carded, also available in bulk pack of 100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Snaps \u0026amp; Shackles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514170055\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rope or wire does the Sea-Dog 170006-1 thimble fit?\u003c\/strong\u003e The Sea-Dog 170006-1 Heavy Duty Thimble is sized for 1\/4 inch rope or wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a rigging thimble used for?\u003c\/strong\u003e A thimble like the Sea-Dog 170006-1 sits inside an eye splice to protect the rope or wire from direct contact with the load it is hoisting, keeping the splice from being crushed and reducing chafe and abrasion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 170006-1 thimble made from?\u003c\/strong\u003e It is constructed of corrosion resistant stamped 304 stainless steel, making it suitable for saltwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 170006-1 thimble rust over time?\u003c\/strong\u003e No. The 304 stainless steel construction of the Sea-Dog 170006-1 is corrosion resistant, so it will not rust under normal marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 170006-1 thimble?\u003c\/strong\u003e The Sea-Dog 170006-1 measures 1-1\/16 inch by 19\/32 inch by 1-1\/2 inch and is designed for 1\/4 inch line or wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 170006-1 thimble weigh?\u003c\/strong\u003e The Sea-Dog 170006-1 Heavy Duty Thimble weighs 0.046 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this thimble sold individually or in bulk?\u003c\/strong\u003e The Sea-Dog 170006-1 is available carded for individual purchase, and also in bulk packs of 100 for outfitting multiple lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this thimble be used on lifelines?\u003c\/strong\u003e Yes. The Sea-Dog 170006-1 is ideal for lifelines and running rigging in addition to general rope or wire terminations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 170006-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, part number 170006-1 is a genuine Sea-Dog Heavy Duty Thimble, not an aftermarket reproduction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the thimble installed with a rope or wire eye splice?\u003c\/strong\u003e The Sea-Dog 170006-1 thimble is placed inside the loop of an eye splice before the splice is completed, so the rope or wire wraps around the thimble's grooved edge and the load bears on the stainless steel rather than crushing the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the Sea-Dog 170006-1?\u003c\/strong\u003e Each order of the Sea-Dog 170006-1 includes the stamped 304 stainless steel thimble sized for 1\/4 inch rope or wire, per the packaging quantity selected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the thimble size affect which rope diameter I should use?\u003c\/strong\u003e Yes, thimble sizing is matched to line diameter; the 170006-1 is specifically sized for 1\/4 inch rope or wire, so a different diameter line requires a different Sea-Dog thimble size.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988547842267,"sku":"S-D-170006-1","price":5.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7699_1fb4db57-7501-4564-b6d9-eda04f3d801c.jpg?v=1784422279"},{"product_id":"sea-dog-147812-1-galvanized-screw-pin-anchor-bow-shackle-1-2-in","title":"Sea-Dog Screw Pin Anchor Shackle, 1\/2 Inch, Galvanized Steel","description":"\u003cp\u003eThe Sea-Dog Screw Pin Anchor Shackle is a 1\/2 inch galvanized steel rigging shackle designed for connecting an anchor to mooring chain and other marine rigging applications. Its rounded bow shape accepts chain, rope, or another shackle, while the screw pin closure allows for quick, tool-free connection and disconnection when speed and repeat use matter. Built from galvanized steel, it is designed to stand up to the corrosive demands of a marine environment, making it a dependable choice for anchor rodes, mooring setups, and general deck rigging.\u003c\/p\u003e\u003cp\u003eThis shackle is sold as a single unit (1 each), and Sea-Dog offers it in the 1\/2 inch pin size to match anchors, chain, and hardware sized for that connection. Whether you are assembling a new anchor kit or replacing worn or corroded rigging hardware, this shackle provides a straightforward, secure connection point.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 147812-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Screw Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.68 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514147064\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 147812-1 anchor shackle?\u003c\/strong\u003e The Sea-Dog 147812-1 anchor shackle has a 1\/2 inch pin size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this shackle made of?\u003c\/strong\u003e It is constructed of galvanized steel, which is designed to resist corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the pin on this shackle work?\u003c\/strong\u003e The 147812-1 uses a screw pin closure, allowing it to be connected and disconnected by hand without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this shackle typically used for?\u003c\/strong\u003e This 1\/2 inch galvanized shackle is used for joining an anchor to mooring chain and for general marine rigging connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the shackle weigh?\u003c\/strong\u003e The Sea-Dog 147812-1 weighs 0.68 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many shackles come in a package?\u003c\/strong\u003e This listing is for a single 147812-1 shackle (quantity of 1 each).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this shackle be used with rope as well as chain?\u003c\/strong\u003e Yes, the rounded bow shape of the 147812-1 shackle can accommodate chain, rope, or another shackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 147812-1 suitable for saltwater use?\u003c\/strong\u003e Its galvanized steel construction is designed to hold up to the corrosive conditions of marine environments, including saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Sea-Dog 147812-1 anchor shackle has UPC 035514147064.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a wrench or tool required to open the shackle?\u003c\/strong\u003e No, the 147812-1 uses a screw pin that can be turned open and closed by hand.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988548006107,"sku":"S-D-147812-1","price":4.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7669_7b76a66d-f40e-4073-9fe1-75025c760622.jpg?v=1784422289"},{"product_id":"sea-dog-chain-stopper-321820-1-formed-304-stainless-steel-fits-3-16-in-to-1-4-in-anchor-chain","title":"Sea-Dog Chain Stopper for 3\/16 inch to 1\/4 inch Anchor Chain, 304 Stainless Steel, Part 321820-1","description":"\u003cp\u003eThe Sea-Dog Chain Stopper, part number 321820-1, is built to protect your windlass and reduce the risk of an anchor free-falling while under way. It mounts alone or inside most bow rollers, working together with your anchor roller to take tension off the windlass itself. Because a windlass is not designed to hold the full load of the ground tackle at anchor, chain and rope should be secured at this chain stopper whenever the windlass is not actively deploying or retrieving the anchor. This reduces strain on the windlass motor, gearing, and mounting hardware during heavy seas or extended anchoring.\u003c\/p\u003e\u003cp\u003eThis chain stopper is sized for chain in the 3\/16 inch to 1\/4 inch range, making it a fit for smaller-chain ground tackle setups on boats within that chain size. It is constructed of formed 304 stainless steel, chosen for its corrosion resistance in salt and fresh water marine environments, so it holds up to repeated exposure without the finish breaking down. A larger version, part number 321825, is available separately for boats running 5\/16 inch to 3\/8 inch chain -- confirm your chain diameter before ordering to make sure you get the correct part.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 321820-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain Size Compatibility:\u003c\/strong\u003e 3\/16 inch to 1\/4 inch chain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 8 inches L x 4 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.684 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Mounts alone or inside most bow rollers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514322133\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits anchor chain sized 3\/16 inch to 1\/4 inch. For chain sized 5\/16 inch to 3\/8 inch, use part number 321825 instead.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat chain sizes does the Sea-Dog 321820-1 chain stopper fit?\u003c\/strong\u003e It fits anchor chain sized 3\/16 inch to 1\/4 inch. For chain sized 5\/16 inch to 3\/8 inch, the Sea-Dog 321825 is the correct part instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 321820-1 chain stopper made for a specific side, port or starboard?\u003c\/strong\u003e No, the Sea-Dog 321820-1 chain stopper is not a side-specific part -- it mounts alone or inside most bow rollers rather than being designated for one side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this chain stopper made from?\u003c\/strong\u003e It is constructed of formed 304 stainless steel, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 321820-1 weigh?\u003c\/strong\u003e This chain stopper weighs 0.684 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a bow roller to install this chain stopper?\u003c\/strong\u003e Not necessarily -- the 321820-1 chain stopper can mount on its own or inside most bow rollers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a chain stopper actually do?\u003c\/strong\u003e It helps prevent damage to the windlass and reduces the risk of the anchor free-falling while under way, by working with the anchor roller to take tension off the windlass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I leave my chain resting on the windlass while anchored?\u003c\/strong\u003e No -- chain and rope should be secured at the 321820-1 chain stopper when the windlass is not in use, since a windlass is not designed for the high loads of holding anchor at rest.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 321820-1 and the 321825 chain stopper?\u003c\/strong\u003e The 321820-1 fits chain sized 3\/16 inch to 1\/4 inch, while the 321825 is the version sized for 5\/16 inch to 3\/8 inch chain -- pick based on your chain diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 321820-1 chain stopper?\u003c\/strong\u003e It measures 8 inches long by 4 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog part?\u003c\/strong\u003e Yes, this is the genuine Sea-Dog chain stopper, manufacturer part number 321820-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this chain stopper resist corrosion in saltwater?\u003c\/strong\u003e Yes -- the 321820-1 is made of formed 304 stainless steel specifically for corrosion resistance in marine use.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988660203739,"sku":"S-D-321820-1","price":49.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7988.jpg?v=1784425695"},{"product_id":"sea-dog-321825-1-chain-stopper-304-stainless-steel-fits-5-16-in-to-3-8-in-chain","title":"Sea-Dog Stainless Steel Chain Stopper 321825-1 for 5\/16 to 3\/8 Inch Anchor Chain","description":"\u003cp\u003eThe Sea-Dog Chain Stopper 321825-1 is a formed 304 stainless steel deck fitting that takes tension off your windlass by securing the anchor chain in place. It mounts alone or inside most bow rollers and works together with your anchor roller to hold the chain under load, helping prevent damage to the windlass and reducing the risk of an accidental free fall of the anchor while under way. Chain and rope should be secured at the chain stopper when the windlass is not in use, since the windlass itself is not designed to carry those high loads at anchor.\u003c\/p\u003e\u003cp\u003eThis chain stopper is sized for 5\/16 inch to 3\/8 inch anchor chain. It is built from corrosion resistant formed 304 stainless steel for long-term use in a marine environment, and is finished to match other Sea-Dog deck hardware. A 3\/8 inch flat head fastener is used with the unit. The part is supplied as a single unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 321825-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Chain Stopper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Formed 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain Size Range:\u003c\/strong\u003e 5\/16 inch to 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 3-1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 2-3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-7\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 3-5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension F:\u003c\/strong\u003e 1-7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 3\/8 inch FH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.44 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits anchor chain sizes 5\/16 inch to 3\/8 inch\u003c\/li\u003e\n\u003cli\u003eMounts alone or inside most bow rollers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat chain sizes does the Sea-Dog 321825-1 chain stopper fit?\u003c\/strong\u003e The Sea-Dog 321825-1 fits anchor chain sizes from 5\/16 inch to 3\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this chain stopper made of?\u003c\/strong\u003e It is made of formed 304 stainless steel, chosen for corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 321825-1 be mounted inside a bow roller?\u003c\/strong\u003e Yes, this chain stopper mounts alone or inside most bow rollers and works with the anchor roller to take tension off the windlass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I need a chain stopper if I already have a windlass?\u003c\/strong\u003e A windlass is not designed to carry the high loads of holding a boat at anchor, so the chain and rope should be secured at the Sea-Dog 321825-1 chain stopper whenever the windlass is not actively hauling or lowering the anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the chain stopper protect against?\u003c\/strong\u003e The 321825-1 helps prevent damage to the windlass and reduces the risk of the anchor free-falling accidentally while the boat is under way.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 321825-1?\u003c\/strong\u003e The Sea-Dog 321825-1 measures 3-1\/8 inch (A) by 2-3\/8 inch (B) by 2-7\/16 inch (C) by 3-5\/8 inch (D), with a 1\/2 inch dimension E and a 1-7\/8 inch dimension F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the chain stopper weigh?\u003c\/strong\u003e The Sea-Dog 321825-1 weighs 1.44 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fastener is used with this part?\u003c\/strong\u003e A 3\/8 inch flat head (FH) fastener is used with the 321825-1 chain stopper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many units come in a pack?\u003c\/strong\u003e The 321825-1 is packaged as a standard pack of 1 each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 321825-1 the same as the Sea-Dog 321820-1 chain stopper?\u003c\/strong\u003e No, the 321825-1 is a distinct, larger size fitted for 5\/16 inch to 3\/8 inch chain, while the Sea-Dog 321820-1 is a separate part number sized for 3\/16 inch to 1\/4 inch chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog part?\u003c\/strong\u003e Yes, the 321825-1 is a genuine Sea-Dog chain stopper, not an aftermarket copy.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988660236507,"sku":"S-D-321825-1","price":66.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7988_7abdba78-d802-475d-9920-94b22bc2e587.jpg?v=1784425736"},{"product_id":"sea-dog-491058-1-large-boat-hook-mooring-buoy-snap-kit-316-stainless-steel-fits-boat-hooks-and-cleats-up-to-24-in-wll-2-185-lbs","title":"Sea-Dog Large Boat Hook Mooring Buoy Snap Kit 491058-1, Fits Cleats up to 24 Inches","description":"\u003cp\u003eThe Sea-Dog Large Boat Hook Mooring Buoy Snap Kit (491058-1) is a convenient, easy solution for attaching a mooring line to a buoy or cleat without leaving the boat. Using the included keeper plate, the channeled snap fits onto the end of a boat hook or other pole, turning a challenging task into a quick, simple process. This is especially useful on high-bowed vessels: simply reach out with the boat pole, hook the carabiner onto the inside of the attachment point, then pull back on the pole. The carabiner snaps shut as it slides free of the pole, securely clipping onto the mooring eye or cleat.\u003c\/p\u003e\u003cp\u003eThe kit includes the snap hook, keeper plate, and the fasteners needed to attach the keeper plate. The snap hook is constructed of investment cast 316 stainless steel for corrosion resistance, paired with a stamped 304 stainless steel keeper plate. The large size works on cleats up to 24 inches, and the assembly carries a working load limit (WLL) of 2,185 pounds. Mounting holes are pre-drilled for easy installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 491058-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Large Boat Hook Mooring Buoy Snap Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel \/ Stamped 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Load Limit:\u003c\/strong\u003e 2,185 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Cleat Size:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 8-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension F:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #8 Flat Head (FH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 12 x 11 x 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Package Quantity:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514492119\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 491058-1 Large Boat Hook Mooring Buoy Snap Kit used for?\u003c\/strong\u003e It lets you attach a mooring line to a buoy or cleat from aboard the boat by snapping a channeled carabiner hook onto the end of a boat hook or pole, hooking the mooring eye or cleat, then pulling back so the carabiner snaps shut and releases from the pole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size cleats does this snap kit work with?\u003c\/strong\u003e The large version of the Sea-Dog Boat Hook Mooring Buoy Snap Kit (491058-1) works on cleats up to 24 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the working load limit of the 491058-1 snap kit?\u003c\/strong\u003e The working load limit (WLL) is 2,185 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the snap hook made of?\u003c\/strong\u003e The snap hook is investment cast 316 stainless steel, and the keeper plate is stamped 304 stainless steel, both chosen for corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with part number 491058-1?\u003c\/strong\u003e The kit includes the snap hook, the keeper plate, and the fasteners needed to attach the keeper plate to a boat hook or pole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog Large Boat Hook Mooring Buoy Snap Kit weigh?\u003c\/strong\u003e It weighs 1.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit fit any boat hook or pole?\u003c\/strong\u003e Yes, the channeled snap design is built to fit onto the end of boat hooks or other poles, and Sea-Dog boat hooks come with pre-drilled mounting holes to make attaching the keeper plate straightforward.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation difficult?\u003c\/strong\u003e No, installation is designed to be simple: the keeper plate mounts to the pole using the included fasteners through pre-drilled holes, and the snap hook then channels onto the pole end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 491058-1 snap kit components?\u003c\/strong\u003e The kit's measured dimensions are 1\/2 inch, 8-1\/8 inches, 1-3\/16 inches, 2-1\/2 inches, 1-11\/16 inches, and 3\/4 inch across its components, with a #8 flat head fastener for mounting the keeper plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog part?\u003c\/strong\u003e Yes, this is the Sea-Dog Large Boat Hook Mooring Buoy Snap Kit, manufacturer part number 491058-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The UPC for the Sea-Dog Large Boat Hook Mooring Buoy Snap Kit (491058-1) is 035514492119.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988824109275,"sku":"S-D-491058-1","price":111.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6756.jpg?v=1784429663"},{"product_id":"sea-dog-rubber-mooring-snubber-5-8-3-4-line-21-1-2-shock-absorbing-dock-line-snubber-561520","title":"Sea-Dog Rubber Mooring Snubber, 5\/8 to 3\/4 Inch Line, 21-1\/2 Inch Length","description":"\u003cp\u003eThe Sea-Dog Rubber Mooring Snubber (part number 561520) absorbs shock loads and relieves tension on dock lines and deck fittings, protecting cleats, chocks, and line ends from the repeated jerking caused by wind, wake, and current. It is sized for line diameters of 5\/8 inch to 3\/4 inch and measures 21-1\/2 inches in length. In use, the snubber is threaded onto the mooring or dock line and the amount of compensating stretch is adjusted simply by changing the number of turns the line makes around the snubber body, letting the same unit be tuned for light chop or heavier surge conditions.\u003c\/p\u003e\u003cp\u003eNo additional hardware, clips, or tools are needed to install or adjust it, so it can be fitted or repositioned on the line in minutes. It is built from high quality rubber engineered to resist sunlight, saltwater, and ozone exposure, making it suited to long-term outdoor use. This makes it a practical choice for boats on exposed moorings, in tidal areas where line tension changes with the water level, and in towing situations where sudden loads are common.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 561520\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Mooring Snubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Diameter Range:\u003c\/strong\u003e 5\/8 inch to 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 21-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514561037\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat line diameter does the Sea-Dog 561520 mooring snubber fit?\u003c\/strong\u003e It is sized for line diameters of 5\/8 inch to 3\/4 inch, which is the largest of the three sizes in this mooring snubber line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this mooring snubber?\u003c\/strong\u003e The Sea-Dog 561520 measures 21-1\/2 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 561520 snubber weigh?\u003c\/strong\u003e It weighs 1.14 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a mooring snubber used for?\u003c\/strong\u003e A mooring snubber absorbs shock loads and relieves tension on dock lines and deck fittings, cutting down on the jerking motion caused by wind and wave action.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need extra hardware or fittings to install the 561520 snubber?\u003c\/strong\u003e No, the Sea-Dog rubber mooring snubber is easy to use and requires no extra hardware to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I adjust how much stretch or give the snubber provides?\u003c\/strong\u003e The amount of compensating movement is adjusted by changing the number of turns the line makes around the snubber, letting one 561520 unit be tuned for different load conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 561520 mooring snubber made of?\u003c\/strong\u003e It is constructed of high quality rubber that resists sunlight, saltwater, and ozone, making it suited to continuous outdoor exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this snubber suited for tidal moorings?\u003c\/strong\u003e Yes, the 561520 is designed for use in tidal areas, on exposed moorings, and in towing situations where line loads fluctuate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog 561520 mooring snubber?\u003c\/strong\u003e It is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 561520 differ from Sea-Dog's other mooring snubber sizes?\u003c\/strong\u003e The 561520 fits 5\/8 inch to 3\/4 inch line and is 21-1\/2 inches long, making it larger than the 561516 (1\/2 inch to 9\/16 inch line, 19-3\/4 inches) and the 561512 (3\/8 inch line, 17-1\/8 inches), so it should be chosen based on the diameter of your mooring line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 561520 mooring snubber?\u003c\/strong\u003e Each 561520 order includes one rubber mooring snubber; no additional hardware is included or required.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988826632411,"sku":"S-D-561520","price":46.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6864.jpg?v=1784429803"},{"product_id":"sea-dog-561512-rubber-mooring-snubber-17-1-8-in-x-3-8-in-epdm-line-shock-absorber-black-universal-fit","title":"Sea-Dog Rubber Mooring Snubber, 17-1\/8 Inch, 3\/8 Inch Line, Model 561512","description":"\u003cp\u003eThe Sea-Dog Rubber Mooring Snubber, model 561512, is a 17-1\/8 inch rubber snubber designed to absorb shock loads and relieve tension on dock lines and deck fittings. As a boat rides on wind, waves, and tidal movement, a mooring line under constant load transmits repeated shock loading into cleats, bollards, and other deck hardware; the snubber's elastic rubber body stretches and recoils to soften that loading before it reaches the fitting. It is sized for 3\/8 inch line and is intended for use in tidal areas, on exposed moorings, and in towing situations where a line needs to absorb sudden strain.\u003c\/p\u003e\u003cp\u003eThe amount of compensating movement is adjustable: the number of turns the line takes around the snubber body changes how much stretch is available, letting the same snubber be tuned for different wind and wave conditions. It requires no additional hardware to install, so it can be rigged directly onto an existing mooring or dock line. The snubber is constructed of high quality rubber engineered to resist sunlight, saltwater, and ozone exposure, making it suited to long-term outdoor use at the dock or mooring.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 561512\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Mooring Snubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength (A):\u003c\/strong\u003e 17-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Size (B):\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.63 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514561013\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for 3\/8 inch diameter mooring or dock lines; not specific to a boat make or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat line size does the Sea-Dog 561512 mooring snubber fit?\u003c\/strong\u003e The Sea-Dog 561512 snubber is sized for 3\/8 inch diameter line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this mooring snubber?\u003c\/strong\u003e It measures 17-1\/8 inches in length, the dimension listed as A on the Sea-Dog 561512 snubber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog mooring snubber made of?\u003c\/strong\u003e It is made of high quality rubber that resists sunlight, saltwater, and ozone, which is what lets the 561512 snubber hold up to long-term outdoor mooring use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 561512 snubber weigh?\u003c\/strong\u003e The Sea-Dog 561512 mooring snubber weighs 0.63 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes installing this snubber require any extra hardware?\u003c\/strong\u003e No. The Sea-Dog 561512 mooring snubber is designed to be rigged directly onto the line with no additional hardware needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a mooring snubber actually protect deck fittings?\u003c\/strong\u003e A mooring snubber absorbs shock loads from wind, waves, and tidal surge and relieves the resulting tension before it reaches cleats or other deck fittings, which reduces sudden jerking loads on the line and hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the amount of shock absorption be adjusted?\u003c\/strong\u003e Yes, the compensating movement of the Sea-Dog 561512 snubber can be adjusted by changing the number of times the line is turned around the snubber body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this snubber suited for towing or just mooring?\u003c\/strong\u003e The 561512 snubber is intended for use in tidal areas, on exposed moorings, and in towing situations where a line needs to absorb shock loading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog 561512 snubber?\u003c\/strong\u003e This mooring snubber is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 561512 a universal fit?\u003c\/strong\u003e Yes, it is a universal fit for 3\/8 inch line rather than being specific to a particular boat make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the package with this snubber?\u003c\/strong\u003e The package includes one Sea-Dog 561512 rubber mooring snubber, sold in a standard pack of 1 each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre larger sizes of this snubber available for thicker line?\u003c\/strong\u003e The 561512 is the 3\/8 inch, 17-1\/8 inch version; Sea-Dog offers this snubber design in other sizes for larger line diameters as separate part numbers.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988826730715,"sku":"S-D-561512","price":19.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6864_ab844772-e0c2-4a98-8653-9b5acc47fb3e.jpg?v=1784429812"},{"product_id":"sea-dog-rubber-mooring-snubber-561516-epdm-dock-line-shock-absorber-for-1-2-in-to-9-16-in-line-19-3-4-in","title":"Sea-Dog Rubber Mooring Snubber, 19-3\/4 Inch, Fits 1\/2 Inch - 9\/16 Inch Line","description":"\u003cp\u003eThe Sea-Dog Rubber Mooring Snubber (part number 561516) absorbs shock loads and relieves tension on dock lines and deck fittings, protecting cleats, chocks, and mooring hardware from the repeated jolts caused by wave action, wind, and boat wake. It works by stretching under load and compressing back, converting sudden line snatch into gradual, absorbed movement rather than a hard jerk on your mooring hardware.\u003c\/p\u003e\u003cp\u003eThe snubber measures 19-3\/4 inches long and is sized for line in the 1\/2 inch to 9\/16 inch range. The amount of compensating movement is adjustable simply by changing the number of turns the line takes around the snubber body, so you can tune the amount of give to match tidal swing, exposed mooring conditions, or towing loads. No additional hardware is required to install or use it, making it a straightforward add to any dock line setup.\u003c\/p\u003e\u003cp\u003eConstructed of high quality rubber, the snubber is built to resist sunlight, saltwater, and ozone exposure, which are the primary causes of degradation in mooring accessories left rigged outdoors. It is well suited to tidal areas, exposed moorings, and towing situations where dock lines see frequent, repeated strain.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 561516\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Mooring Snubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 19-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Size:\u003c\/strong\u003e 1\/2 inch - 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514561020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat line size does the Sea-Dog 561516 mooring snubber fit?\u003c\/strong\u003e The Sea-Dog 561516 mooring snubber is sized for dock line in the 1\/2 inch to 9\/16 inch range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this mooring snubber?\u003c\/strong\u003e It measures 19-3\/4 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mooring snubber made of?\u003c\/strong\u003e It is constructed of rubber that is built to resist sunlight, saltwater, and ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a mooring snubber work?\u003c\/strong\u003e A mooring snubber absorbs shock loads and relieves tension on lines and deck fittings by stretching and compressing under load, softening the jolt from wave action, wind, or towing rather than transmitting it directly to your cleats and fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need extra hardware to install the Sea-Dog 561516 snubber?\u003c\/strong\u003e No, the Sea-Dog 561516 snubber is easy to use and requires no extra hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I adjust how much give the snubber provides?\u003c\/strong\u003e The amount of compensating movement can be adjusted by changing the number of turns the line takes around the snubber body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this snubber suitable for tidal areas?\u003c\/strong\u003e Yes, the Sea-Dog 561516 is ideal for use in tidal areas, on exposed moorings, and in towing situations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 561516 mooring snubber weigh?\u003c\/strong\u003e It weighs 1.14 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this rubber snubber hold up to sun and saltwater exposure?\u003c\/strong\u003e Yes, the rubber used in the Sea-Dog 561516 is constructed to resist sunlight, saltwater, and ozone, which are the main causes of degradation in mooring accessories left rigged outdoors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many snubbers come in a package?\u003c\/strong\u003e The Sea-Dog 561516 mooring snubber is packaged as a standard pack of 1 each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 561516 snubber the same size as other Sea-Dog mooring snubbers?\u003c\/strong\u003e No, the 561516 is sized for 1\/2 inch to 9\/16 inch line and measures 19-3\/4 inches; Sea-Dog offers other snubber part numbers sized for different line diameters, so match your line size before ordering.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988826763483,"sku":"S-D-561516","price":31.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6864_aecde7ac-a40f-4abb-9a98-1aa34906370a.jpg?v=1784429813"},{"product_id":"attwood-66202-3-tethered-spring-loaded-1-4-inch-clevis-pin-with-cable-lanyard-for-bimini-top-deck-and-rail-hinge-fittings","title":"Attwood 66202-3 Tethered Spring-Loaded 1\/4 Inch Clevis Pin with Cable Lanyard for Deck or Rail Hinge, Silver","description":"\u003cp\u003eThe Attwood 66202-3 is a removable, tethered spring-loaded clevis pin sized at 1\/4 inch, built to secure an Attwood bimini top deck or rail hinge fitting. A cable lanyard keeps the pin attached to the hinge fitting at all times, so it cannot be misplaced or lost overboard once removed for folding, storing, or adjusting the bimini top. The spring-loaded drop-pin design locks the pin securely in place while still allowing a quick, one-handed release when it is time to take the top down.\u003c\/p\u003e\u003cp\u003eConstructed of metal with a polished silver finish, the pin has a 0.25 inch outside diameter to match standard 1\/4 inch hinge pin openings and carries a maximum shear strength of 500 psi. It is intended for use with Attwood deck or rail hinge fittings, including part numbers 66160, 66200, 66220, and 66383, making it a direct fit replacement pin for boat owners who need to replace a lost, bent, or worn original pin without replacing the entire hinge assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 66202-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Spring-Loaded Tethered Clevis Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Diameter:\u003c\/strong\u003e 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Shear Strength:\u003c\/strong\u003e 500 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4.5 x 9.25 x 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.0767 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Attwood Deck or Rail Hinge 66160, 66200, 66220, 66383\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Aftermarket Packaging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697013804\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAttwood Deck or Rail Hinge 66160\u003c\/li\u003e\n\u003cli\u003eAttwood Deck or Rail Hinge 66200\u003c\/li\u003e\n\u003cli\u003eAttwood Deck or Rail Hinge 66220\u003c\/li\u003e\n\u003cli\u003eAttwood Deck or Rail Hinge 66383\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 66202-3 clevis pin used for?\u003c\/strong\u003e The Attwood 66202-3 is a spring-loaded clevis pin used to secure an Attwood bimini top deck or rail hinge fitting, holding the hinge closed while allowing quick release when the top needs to be folded or removed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this pin get lost when I remove it?\u003c\/strong\u003e No. The 66202-3 includes a cable lanyard that tethers the pin to the hinge fitting, so it stays attached to the boat even after you pull it to release the hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat diameter is the Attwood 66202-3 clevis pin?\u003c\/strong\u003e It has a 0.25 inch (1\/4 inch) outside diameter, sized to match standard Attwood deck and rail hinge pin openings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 66202-3 pin made of?\u003c\/strong\u003e The 66202-3 is made of metal with a polished silver finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Attwood hinges is the 66202-3 pin compatible with?\u003c\/strong\u003e The 66202-3 is designed for use with Attwood deck or rail hinge fittings 66160, 66200, 66220, and 66383.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much shear strength does this clevis pin have?\u003c\/strong\u003e The 66202-3 has a maximum shear strength of 500 psi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the spring-loaded drop-pin design work?\u003c\/strong\u003e A drop-pin mechanism keeps the 66202-3 locked in place inside the hinge fitting during normal use, but lets you pull the pin for a quick release when lowering or storing the bimini top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 66202-3 clevis pin weigh?\u003c\/strong\u003e The Attwood 66202-3 weighs 0.0767 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of the 66202-3?\u003c\/strong\u003e The 66202-3 measures 4.5 x 9.25 x 3.5 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 66202-3 an original Attwood part?\u003c\/strong\u003e Yes, the 66202-3 is a genuine Attwood replacement clevis pin sold in aftermarket packaging for use with Attwood deck or rail hinge fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 66202-3 to replace a missing bimini top pin?\u003c\/strong\u003e Yes, the 66202-3 is intended as a direct replacement pin for Attwood deck or rail hinge fittings when the original clevis pin is lost, bent, or worn.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989672571099,"sku":"ATT-66202-3","price":8.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-66202-3_lg__04417.1558110617.500.750.jpg?v=1785189167"},{"product_id":"gen3-marine-1-4-galvanized-anchor-shackle-single-bow-shackle-for-anchor-chain-rode","title":"Gen3 Marine Galvanized Anchor Shackle, 1\/4 Inch, Single","description":"\u003cp\u003eThe Gen3 Marine Galvanized Anchor Shackle is a 1\/4 inch single shackle used to connect an anchor to chain or rode, or to join sections of anchor chain together. Built from galvanized steel, it resists corrosion from saltwater and marine spray, making it suitable for use as part of an anchoring system on boats that are regularly exposed to the elements. The single-shackle design provides a straightforward, secure connection point where a pin passes through the shackle body and chain or anchor shank link, allowing the assembly to pivot as the boat swings at anchor. At 1\/4 inch, it is sized for lighter-duty anchor rode and chain setups where a compact, low-profile connector is needed. As a wear item exposed to constant load and saltwater immersion, an anchor shackle should be inspected periodically for pitting, thread wear, or pin looseness and replaced if any of these are found, since it is a critical link between the boat and its ground tackle.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-7023\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037462043\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Anchor Chain and Shackles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Gen3 Marine anchor shackle?\u003c\/strong\u003e The Gen3 Marine anchor shackle, part number 5-7023, is a 1\/4 inch size shackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a single or twin shackle?\u003c\/strong\u003e Part number 5-7023 is a single shackle, not a twin or double configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the shackle made from?\u003c\/strong\u003e This anchor shackle is made from galvanized steel, which provides corrosion resistance for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the anchor shackle weigh?\u003c\/strong\u003e The Gen3 Marine 1\/4 inch anchor shackle weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this shackle used for?\u003c\/strong\u003e This 1\/4 inch galvanized shackle, Gen3 Marine part 5-7023, is used to connect an anchor to chain or rode, or to join sections of anchor chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill saltwater corrode this shackle?\u003c\/strong\u003e The galvanized steel finish on the Gen3 Marine 5-7023 shackle is designed to resist corrosion from saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow often should an anchor shackle be replaced?\u003c\/strong\u003e An anchor shackle such as the 5-7023 should be inspected periodically for pitting, thread wear, or pin looseness and replaced if any of these signs are found, since it carries the anchoring load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the anchor shackle include a pin?\u003c\/strong\u003e The Gen3 Marine 5-7023 shackle is a complete single shackle assembly with its pin included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The UPC for the Gen3 Marine 1\/4 inch galvanized anchor shackle (part 5-7023) is 810037462043.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this shackle be used to join chain sections instead of an anchor?\u003c\/strong\u003e Yes, the 1\/4 inch single shackle can be used to connect chain sections together in addition to attaching an anchor to rode or chain.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991686066395,"sku":"GEN-5-7023","price":0.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_b5c55dd7-854f-488c-bcaa-acf1a34eec4d.jpg?v=1785349356"},{"product_id":"gen3-marine-5-16-in-galvanized-anchor-shackle-for-boat-anchor-chain-and-rode","title":"Gen3 Marine Galvanized Anchor Shackle, 5\/16 Inch","description":"\u003cp\u003eThe Gen3 Marine Galvanized Anchor Shackle (5-7024) is a 5\/16 inch shackle built to connect anchor chain and rope rode, or to join chain sections and anchor swivels, aboard a boat. Its galvanized finish provides corrosion resistance for regular exposure to saltwater and marine environments, making it a straightforward, dependable link in an anchoring system. The compact 5\/16 inch size suits anchor rodes and ground tackle setups that call for this dimension, and at 0.3 pounds it is light enough to handle easily when rigging or stowing anchor gear.\u003c\/p\u003e\u003cp\u003eThis shackle is sold under Gen3 Marine part number 5-7024 and is intended as a functional connector rather than a decorative fitting -- boaters use it to attach anchors, chain, and rode components securely. As with any anchor hardware, the shackle pin should be seated and secured before use to keep the connection from working loose.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-7024\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Anchor Chain and Shackles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037462050\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Gen3 Marine anchor shackle 5-7024?\u003c\/strong\u003e The Gen3 Marine anchor shackle, part number 5-7024, is a 5\/16 inch size shackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the shackle made of or finished with?\u003c\/strong\u003e Gen3 Marine part number 5-7024 has a galvanized finish, giving it corrosion resistance for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 5-7024 anchor shackle weigh?\u003c\/strong\u003e The Gen3 Marine anchor shackle 5-7024 weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this shackle used for?\u003c\/strong\u003e It is an anchor shackle used to connect anchor chain, rope rode, or ground tackle components on a boat, sold as Gen3 Marine part number 5-7024.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Gen3 Marine 5-7024 shackle suitable for saltwater use?\u003c\/strong\u003e Yes, its galvanized finish is designed for the corrosion resistance needed in marine and saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of marine hardware does part 5-7024 fall under?\u003c\/strong\u003e Gen3 Marine 5-7024 is listed in the Anchor Chain and Shackles category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Gen3 Marine part?\u003c\/strong\u003e Yes, this shackle is sold under the genuine Gen3 Marine part number 5-7024.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with this shackle?\u003c\/strong\u003e The Gen3 Marine anchor shackle 5-7024 carries UPC 810037462050.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5-7024 shackle come with a pin?\u003c\/strong\u003e The 5-7024 anchor shackle from Gen3 Marine is a shackle assembly; it should be checked to ensure the pin is properly seated and secured before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this shackle connect chain to a rope anchor rode?\u003c\/strong\u003e Yes, the 5\/16 inch Gen3 Marine shackle 5-7024 is designed to join anchor chain sections or connect chain to rope rode and similar ground tackle fittings.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991686459611,"sku":"GEN-5-7024","price":1.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_19fd2798-556f-4f17-8061-920e653fa6b1.jpg?v=1785349367"},{"product_id":"gen3-marine-3-8-galvanized-anchor-shackle-marine-bow-shackle-for-chain-rope-and-anchor-rode","title":"Gen3 Marine Galvanized Anchor Shackle 3\/8 Inch","description":"\u003cp\u003eThe Gen3 Marine Galvanized Anchor Shackle connects anchor chain to anchor or rode with a durable galvanized finish built to withstand marine environments. This 3\/8 inch shackle is sized for anchor and chain setups using matching 3\/8 inch hardware, providing a secure pin-and-bow connection point that resists corrosion from saltwater and freshwater exposure. Its galvanized steel construction offers a strong, dependable link in the ground tackle system, standing up to the repeated loading and environmental wear that anchoring hardware experiences. Boat owners use anchor shackles like this one to join chain to anchor shank, chain to rode, or chain to bow eye, making it a basic but essential component of a reliable anchoring setup. The compact, lightweight design keeps it easy to store as a spare while still delivering the strength needed for everyday anchoring tasks.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-7025\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Anchor Chain and Shackles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Gen3 Marine anchor shackle?\u003c\/strong\u003e The Gen3 Marine Galvanized Anchor Shackle, part number 5-7025, is a 3\/8 inch shackle sized to match 3\/8 inch anchor chain and rode hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this shackle made from?\u003c\/strong\u003e It is made from galvanized steel, giving part number 5-7025 a corrosion-resistant finish suited to saltwater and freshwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the anchor shackle weigh?\u003c\/strong\u003e The Gen3 Marine 5-7025 anchor shackle weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this shackle used for?\u003c\/strong\u003e This shackle joins anchor chain to an anchor, rode, or bow eye, serving as a connecting link in a boat's ground tackle system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this shackle suitable for saltwater use?\u003c\/strong\u003e Yes, the galvanized finish on the Gen3 Marine 5-7025 shackle is designed to resist corrosion in both saltwater and freshwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of hardware does this product belong to?\u003c\/strong\u003e Part number 5-7025 is listed under anchor chain and shackle hardware, the category of fittings used to assemble and connect ground tackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the shackle include a pin?\u003c\/strong\u003e The Gen3 Marine Galvanized Anchor Shackle is a standard bow shackle, which includes its mating pin as part of the single 5-7025 unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this shackle be used as a spare for my anchor setup?\u003c\/strong\u003e Yes, the compact 3\/8 inch size of the 5-7025 shackle makes it a practical spare to keep on board for anchor or chain connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this shackle fit chain that is not 3\/8 inch?\u003c\/strong\u003e The Gen3 Marine 5-7025 shackle is sized for 3\/8 inch chain and rode hardware, so it is intended for matching 3\/8 inch ground tackle.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991686590683,"sku":"GEN-5-7025","price":1.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_2db9e680-a458-4673-b583-227e4ad86dd2.jpg?v=1785349367"},{"product_id":"gen3-marine-1-2-anchor-shackle-316-stainless-steel-screw-pin-bow-shackle","title":"Gen3 Marine 316 Stainless Steel 1\/2 Inch Anchor Shackle with Screw Pin Closure","description":"\u003cp\u003eThe Gen3 Marine 316 Stainless Steel Anchor Shackle is a 1\/2 inch round shackle built for connecting anchor chain and rode in harsh marine environments. Constructed from 316 stainless steel, it resists corrosion from saltwater exposure better than lower grades of stainless, making it a durable choice for anchoring and general rigging duty aboard a boat. The rounded shape distributes load evenly and helps the shackle handle different anchoring conditions without binding or excessive wear on the chain or rope it connects.\u003c\/p\u003e\u003cp\u003eThis shackle uses a screw pin closure, which allows it to be assembled and disassembled by hand without special tools. That makes it easy to attach to an anchor, swivel, or chain link and just as easy to remove for maintenance, inspection, or swapping components. At 1\/2 inch, it is sized for anchor and chain setups that call for a 1\/2 inch shackle pin diameter. With an overall package weight of 0.7 pounds, it is sized for typical recreational and light commercial anchoring hardware rather than heavy commercial ground tackle.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-7036\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 316 Stainless Steel 1\/2 Inch Anchor Shackle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Size:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Screw pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 6 x 4.25 x 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037462111\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Anchor Chain and Shackles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this anchor shackle?\u003c\/strong\u003e The Gen3 Marine anchor shackle (part number 5-7036) has a 1\/2 inch pin size and measures 6 x 4.25 x 1.25 inches overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the shackle made from?\u003c\/strong\u003e It is made from 316 stainless steel, a grade chosen for its corrosion resistance in saltwater and other harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the pin attach and release?\u003c\/strong\u003e The 5-7036 shackle uses a screw pin closure, so the pin threads in and out by hand without requiring special tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this shackle rounded or a D-shape?\u003c\/strong\u003e This is a round shackle, which distributes load evenly around the bow and is well suited to anchoring applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this shackle weigh?\u003c\/strong\u003e The Gen3 Marine 5-7036 anchor shackle weighs 0.7 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this shackle typically used for?\u003c\/strong\u003e It is intended for connecting anchor chain, rode, or rigging components on a boat, particularly where a corrosion-resistant connector is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I disassemble this shackle for maintenance?\u003c\/strong\u003e Yes, the screw pin closure on the 5-7036 shackle allows it to be disassembled and reassembled for inspection or maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 316 stainless steel better than standard stainless for marine use?\u003c\/strong\u003e 316 stainless steel contains added molybdenum compared to more basic stainless grades, which gives it improved resistance to saltwater corrosion, making the 5-7036 shackle suited to continuous marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the exact dimensions of this shackle?\u003c\/strong\u003e The Gen3 Marine anchor shackle measures 6 inches by 4.25 inches by 1.25 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this shackle come with any additional hardware?\u003c\/strong\u003e The 5-7036 anchor shackle is a single stainless steel shackle with its screw pin; no additional hardware is included.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991691243739,"sku":"GEN-5-7036","price":5.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41NJbYY_UPL_b8835cc1-750d-4e29-a3fd-8e7a3540aeb0.jpg?v=1784509939"},{"product_id":"gen3-marine-stainless-steel-anchor-swivel-connector-5-16-3-8-8-10mm-360-degree-rotation","title":"Gen3 Marine Stainless Steel Anchor Swivel Connector, 5\/16 Inch - 3\/8 Inch (8-10mm), 360 Degree Rotation","description":"\u003cp\u003eThe Gen3 Marine Stainless Steel Anchor Swivel Connector (5-7084) attaches between your anchor and chain, or between the chain and line, to keep rope from twisting and to prevent snagging while anchoring. Built from corrosion resistant stainless steel, it rotates a full 360 degrees so the anchor can turn freely with current and wind without transferring that twist up through the rode. This lets the anchor set and reset naturally on the seabed while keeping your line and chain tangle-free above it.\u003c\/p\u003e\u003cp\u003eSized for 5\/16 inch to 3\/8 inch (8-10mm) chain and rope, it works as a straightforward connection point in a typical anchor rode setup: anchor to swivel, swivel to chain, and chain to line. The stainless steel construction is intended to stand up to saltwater exposure without the rust and pitting that plain steel hardware develops over time.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-7084\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Anchor Swivel Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope\/Chain Size Compatibility:\u003c\/strong\u003e 5\/16 inch - 3\/8 inch (8-10mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotation:\u003c\/strong\u003e 360 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 4.5 x 3.5 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size chain and rope does this anchor swivel fit?\u003c\/strong\u003e The Gen3 Marine anchor swivel connector (5-7084) is sized for 5\/16 inch to 3\/8 inch (8-10mm) chain and rope.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the anchor swivel made of?\u003c\/strong\u003e It is made from stainless steel, chosen for corrosion resistance in saltwater and freshwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the swivel actually rotate?\u003c\/strong\u003e Yes, the 5-7084 swivel connector rotates a full 360 degrees, allowing the anchor to turn independently of the rope and chain above it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does this connector go in the anchor rode?\u003c\/strong\u003e It is designed to attach between the anchor and chain, or between the chain and line, acting as the swivel point in the anchor rode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this stop my anchor line from twisting?\u003c\/strong\u003e Twisting is the main problem this Gen3 Marine swivel addresses: by letting the anchor rotate freely, it keeps the rope and chain from becoming twisted or snagged during deployment and retrieval.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 5-7084 anchor swivel?\u003c\/strong\u003e The Gen3 Marine anchor swivel measures 4.5 x 3.5 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the anchor swivel weigh?\u003c\/strong\u003e It weighs 1.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this swivel rated for saltwater use?\u003c\/strong\u003e The stainless steel construction of the 5-7084 is corrosion resistant, making it suitable for saltwater anchoring conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this between the chain and the anchor line instead of the anchor itself?\u003c\/strong\u003e Yes, the Gen3 Marine swivel connector can be secured between the chain and line, not just between the anchor and chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is this anchor connector?\u003c\/strong\u003e This is a Gen3 Marine product, part number 5-7084.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this include the anchor or chain?\u003c\/strong\u003e No, the 5-7084 is the swivel connector only; it is designed to connect your existing anchor, chain, and rope, which are sold separately.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991692488923,"sku":"GEN-5-7084","price":18.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31pTL3tZ5TL.jpg?v=1784509968"},{"product_id":"gen3-marine-stainless-steel-anchor-swivel-connector-360-degree-rotation-5-16-3-8-8-10mm-chain","title":"Gen3 Marine Stainless Steel Anchor Swivel Connector, 1\/4 in - 5\/16 in (6-8mm) Chain, 360 Degree Rotation","description":"\u003cp\u003eThe Gen3 Marine Anchor Swivel Connector links your anchor rope to your anchor chain while letting the two rotate independently, so the line does not twist or kink as the anchor sets and the boat swings on the wind or current. Built from stainless steel for corrosion resistance in saltwater and freshwater environments, this connector rotates a full 360 degrees, allowing the chain and anchor to turn freely without transferring twist back up the rope.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: attach the swivel between the anchor and the chain, or between the chain and the line, using standard shackles or connectors sized to fit. It is sized for 1\/4 inch to 5\/16 inch (6-8mm) anchor chain, making it a compact, lightweight addition to a ground tackle setup that helps prevent snagging and line fouling during anchoring and retrieval.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-7083\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain Size Compatibility:\u003c\/strong\u003e 1\/4 inch - 5\/16 inch (6-8mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotation:\u003c\/strong\u003e 360 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 4.5 x 3.5 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037462128\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Gen3 Marine Anchor Swivel Connector (5-7083) do?\u003c\/strong\u003e It connects an anchor to its chain (or the chain to the anchor line) and rotates freely, preventing the rope and chain from twisting or kinking as the boat swings at anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat chain size does this swivel connector fit?\u003c\/strong\u003e The 5-7083 connector is sized for 1\/4 inch to 5\/16 inch (6-8mm) anchor chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it rotate a full circle?\u003c\/strong\u003e Yes, the swivel rotates a full 360 degrees, letting the anchor and chain turn independently of the rope above it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Gen3 Marine anchor connector made from?\u003c\/strong\u003e It is made from stainless steel, chosen for its corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 5-7083 anchor swivel weigh?\u003c\/strong\u003e It weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of this anchor connector?\u003c\/strong\u003e The 5-7083 ships in a package measuring 4.5 x 3.5 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does the swivel connector get installed on my ground tackle?\u003c\/strong\u003e Attach the Gen3 Marine swivel connector between the anchor and the chain, or alternatively between the chain and the anchor line, wherever twisting is occurring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this help stop my anchor line from getting twisted?\u003c\/strong\u003e Yes, that is its primary purpose: the 360 degree rotation of the 5-7083 keeps rope and chain from becoming twisted or snagged during anchoring and retrieval.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the finish on this connector resistant to rust?\u003c\/strong\u003e The stainless steel finish on the Gen3 Marine 5-7083 is corrosion resistant, suited to saltwater and freshwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the anchor connector include the shackles needed to attach it?\u003c\/strong\u003e The dossier for the 5-7083 does not list included shackles or hardware; it covers the swivel connector body itself.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991692554459,"sku":"GEN-5-7083","price":11.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31pTL3tZ5TL_023bdf01-b31f-4e2a-b371-f3542828c95d.jpg?v=1784509972"},{"product_id":"gen3-marine-stainless-steel-anchor-swivel-connector-3-8-1-2-10-12mm-360-degree-rotation-mpn-5-7085","title":"Gen3 Marine Stainless Steel Anchor Swivel Connector, 3\/8 Inch - 1\/2 Inch (10-12mm)","description":"\u003cp\u003eThe Gen3 Marine Anchor Swivel Connector is a stainless steel connecting link designed to join your anchor to your anchor chain, preventing the rope and chain from becoming twisted during anchoring and retrieval. Built for the 3\/8 inch to 1\/2 inch (10-12mm) chain and rope range, this connector rotates a full 360 degrees, allowing the anchor to spin freely without transferring twist back up the line.\u003c\/p\u003e\u003cp\u003eConstructed from corrosion-resistant stainless steel, the connector is designed to hold up to repeated exposure to saltwater and marine environments. Installation is straightforward: attach the swivel between the anchor and the chain, or alternatively secure it between the chain and the rope line, depending on where the twisting occurs on your setup.\u003c\/p\u003e\u003cp\u003eThis anchor swivel is a simple, durable upgrade for boaters who want to reduce line snagging, tangling, and wear caused by anchor rotation during deployment and retrieval.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-7085\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Anchor Swivel Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotation:\u003c\/strong\u003e 360 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Size:\u003c\/strong\u003e 3\/8 inch - 1\/2 inch (10-12mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 5.5 x 2.5 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Gen3 Marine Anchor Swivel Connector used for?\u003c\/strong\u003e It connects an anchor to an anchor chain (or a chain to a rope line) and rotates 360 degrees to keep the rope and chain from becoming twisted during anchoring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size chain or rope does this anchor connector fit?\u003c\/strong\u003e The Gen3 Marine 5-7085 anchor swivel is sized for 3\/8 inch to 1\/2 inch (10-12mm) chain and rope.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the anchor swivel made from?\u003c\/strong\u003e It is made from stainless steel, chosen for its corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the swivel rotate freely?\u003c\/strong\u003e Yes, the connector rotates a full 360 degrees, letting the anchor spin without twisting the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should the anchor swivel be installed?\u003c\/strong\u003e It can be attached between the anchor and the chain, or alternatively between the chain and the rope line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 5-7085 anchor connector?\u003c\/strong\u003e The Gen3 Marine anchor swivel measures 5.5 x 2.5 x 1.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the anchor swivel weigh?\u003c\/strong\u003e It weighs 3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this connector rust or corrode?\u003c\/strong\u003e The stainless steel construction of the 5-7085 swivel is designed to resist corrosion from saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this anchor swivel come with mounting hardware or a shackle?\u003c\/strong\u003e The Gen3 Marine 5-7085 is a swivel connector only; no additional hardware is specified as included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this swivel be used with both rope and chain?\u003c\/strong\u003e Yes, it is designed to work between an anchor and chain or between a chain and a rope line, within the 3\/8 inch to 1\/2 inch (10-12mm) size range.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991692685531,"sku":"GEN-5-7085","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31pTL3tZ5TL_ab9d4d04-c91c-4392-bf10-02740dbb6bb6.jpg?v=1784509978"},{"product_id":"tie-down-engineering-fluted-shackle-bolt-86250-3-8-in-x-3-in-grade-5-zinc-plated-bolts-with-nuts-pair","title":"Tie Down Engineering Fluted Shackle Bolt 86250, 3\/8 in. X 3 in. Grade 5 Zinc-Plated Bolts with Nuts, Pair","description":"\u003cp\u003eThe Tie Down Engineering Fluted Shackle Bolt (86250) is a 3\/8 in. X 3 in. Grade 5 zinc-plated bolt set designed for use with trailer spring hanger brackets and equalizers. Each bolt features a fluted shank, a design engineered to prevent the bolt from turning inside the hanger bracket during installation or use. A bolt that spins in place can wear out the hanger bracket over time, so the fluting keeps the bolt fixed while the nut is tightened, protecting the bracket and helping the connection stay secure.\u003c\/p\u003e\u003cp\u003eBuilt from Grade 5 steel with a zinc-plated finish, this bolt set resists corrosion in the wet, road-splash, and marine-adjacent environments common to boat trailer axles. The 86250 is sold as a pair, with each bolt shipping alongside a matching nut, giving you both fasteners needed for a spring hanger bracket or equalizer replacement in one package. This makes it a straightforward maintenance or upgrade part for trailer owners replacing worn, rusted, or damaged shackle hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86250\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Fluted Shackle Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Size:\u003c\/strong\u003e 3\/8 in. X 3 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade Rating:\u003c\/strong\u003e Grade 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Fluted shank (prevents bolt from turning)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Matching nuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 bolts and 2 nuts (pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628862508\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 6.75 x 3.75 x 1.63 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFor use with trailer spring hanger brackets and equalizers\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Tie Down Engineering 86250 shackle bolt?\u003c\/strong\u003e The 86250 is a 3\/8 in. X 3 in. Bolt, made from Grade 5 steel with a zinc-plated finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 86250 shackle bolt used for?\u003c\/strong\u003e It is used with trailer spring hanger brackets and equalizers, providing the pivot bolt and nut needed to secure the bracket connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the bolt have a fluted shank?\u003c\/strong\u003e The fluted design on the Tie Down Engineering 86250 keeps the bolt from turning while the nut is being tightened, which prevents the bolt from spinning and wearing out the hanger bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bolts come in one package of the 86250?\u003c\/strong\u003e The 86250 is sold as a pair, so each package includes 2 fluted shackle bolts and 2 matching nuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre nuts included with the 86250 shackle bolt?\u003c\/strong\u003e Yes, each bolt in the Tie Down Engineering 86250 set comes with a matching nut, so no separate nuts need to be purchased.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material and grade is the 86250 bolt made from?\u003c\/strong\u003e It is made from Grade 5 alloy steel with a zinc-plated finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 86250 shackle bolt set weigh?\u003c\/strong\u003e The Tie Down Engineering 86250 pair weighs 0.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 86250 fit any spring hanger bracket?\u003c\/strong\u003e The 86250 fluted shackle bolt is designed for use with spring hanger brackets and equalizers generally; it is not tied to a specific vehicle or trailer model in the manufacturer's listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 86250 a genuine Tie Down Engineering part?\u003c\/strong\u003e Yes, 86250 is Tie Down Engineering's own part number for this fluted shackle bolt and nut set, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 86250 and a standard hex bolt for a shackle?\u003c\/strong\u003e Unlike a plain hex bolt, the 86250's fluted shank resists turning once installed, which reduces wear on the spring hanger bracket over repeated use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Tie Down Engineering 86250?\u003c\/strong\u003e The UPC for the 86250 fluted shackle bolt pair is 081628862508.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017657458907,"sku":"T-D-86250","price":7.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-D-86250-Bolts-2__75535.1739477371.500.750.jpg?v=1785329216"},{"product_id":"lewmar-60mm-synchro-single-block-1-760-lb-working-load-limit-fits-5-16-to-3-8-inch-line-29926001bk","title":"Lewmar 60mm Synchro Single Block, 1,760 lb Working Load Limit, Fits 5\/16 to 3\/8 Inch Line - 29926001BK","description":"\u003cp\u003eThe Lewmar 60mm Synchro Single Block (29926001BK) is a single-sheave sailing block engineered for efficient rope handling on halyards, mainsheet systems, mast foot and head blocks, and boom vangs. The 60mm sheave is sized to accommodate line diameters from 5\/16 inch to 3\/8 inch and carries a 1,760 pound working load limit, giving it the strength for demanding running rigging applications.\u003c\/p\u003e\u003cp\u003eA high-density Free-Spin bearing reduces axle diameter and rope friction, delivering smoother power transfer and less rope wear compared to standard budget blocks. The block geometry and self-aligning head are optimized to keep the sheave tracking true under load, and the design allows an easy switch between swiveling and fixed shackle configurations to suit different rigging setups. Stiff glass fiber reinforced cheeks resist flexing and help prevent lines from wedging between the sheave and the block body, while a stainless steel strap adds strength and extends service life. The shackle post is precision-designed for compatibility with Lewmar traveler systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lewmar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 29926001BK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Single Block (Synchro Series)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSheave Diameter:\u003c\/strong\u003e 60 millimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Load Limit:\u003c\/strong\u003e 1,760 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Diameter Range:\u003c\/strong\u003e 5\/16 inch to 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e High-density Free-Spin bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheek Material:\u003c\/strong\u003e Glass fiber reinforced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShackle Configuration:\u003c\/strong\u003e Switchable between swiveling and fixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 743683203787\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat line size does the Lewmar 29926001BK Synchro Single Block accept?\u003c\/strong\u003e The 29926001BK accommodates line diameters from 5\/16 inch to 3\/8 inch, matching its 60 millimeter sheave.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the working load limit of this block?\u003c\/strong\u003e 1,760 pounds is the working load limit for the Lewmar 60mm Synchro Single Block, 29926001BK.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the shackle be swapped between swiveling and fixed?\u003c\/strong\u003e Yes, the Synchro Single Block, part number 29926001BK, is designed so the shackle can be switched between a swiveling and a fixed configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the sheave made to reduce friction?\u003c\/strong\u003e A high-density Free-Spin bearing in the 29926001BK reduces axle diameter and rope friction for smoother power transfer and less rope wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this block compatible with Lewmar travelers?\u003c\/strong\u003e Yes, the 29926001BK has a shackle post precision-designed for compatibility with Lewmar traveler systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are typical uses for this block?\u003c\/strong\u003e The Lewmar 60mm Synchro Single Block is used for halyard tuning, mainsheet systems, mast foot and head blocks, and boom vangs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the block cheeks made from?\u003c\/strong\u003e The cheeks on the 29926001BK are stiff glass fiber reinforced construction, which helps prevent lines from wedging between the sheave and the block body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the block include a stainless steel strap?\u003c\/strong\u003e Yes, the 29926001BK includes a stainless steel strap for added strength and longer service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lewmar 29926001BK weigh?\u003c\/strong\u003e The Lewmar 60mm Synchro Single Block, 29926001BK, weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this block different from a standard budget block?\u003c\/strong\u003e The Synchro Single Block's optimized geometry, Free-Spin bearing, and self-aligning head are built to cut friction compared to a standard budget block, resulting in smoother handling and less rope wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat sheave size does the 29926001BK use?\u003c\/strong\u003e This block uses a 60 millimeter sheave diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 29926001BK a single or double block?\u003c\/strong\u003e The 29926001BK is a single-sheave block, part of Lewmar's Synchro block line.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":49025132560603,"sku":"LEW-29926001BK","price":38.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/LEW-29925001BK__74651.1722514135.500.750.jpg?v=1785329117"},{"product_id":"lewmar-72mm-synchro-block-single-black-7-16-inch-max-line-2420-lbs-safe-working-load","title":"Lewmar 72mm Synchro Block Single, Black - 7\/16 Inch Max Line, 2420 lbs Safe Working Load","description":"\u003cp\u003eThe Lewmar 72mm Synchro Block Single (part number 29927201BK) is a single-sheave sailboat block built to transfer power smoothly from deck to sail while minimizing rope wear. It uses a free-spin bearing and a self-aligning head, so the sheave rotates freely and stays true to the load angle even as line direction shifts during a maneuver, reducing friction and line abrasion over time. The block accepts line up to 7\/16 inch in diameter and carries a safe working load of 2420 pounds, making it suitable for control lines, sheets, and other running rigging that see real load.\u003c\/p\u003e\u003cp\u003eConstruction pairs a stainless steel strap for strength and long service life with stiff glass-fiber-reinforced cheeks that resist wedging of the line, keeping the sheave running cleanly under load. The block also features a tool-free sliding swivel locking mechanism, letting the block be positioned and locked onto a track or fitting without additional hardware. It is finished in black and supplied as a single block (one count) rather than a pair. Lewmar backs this block with a 3 year manufacturer warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lewmar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 29927201BK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 72 millimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSheave\/Block Thickness:\u003c\/strong\u003e 72 millimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Line Size:\u003c\/strong\u003e 7\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe Working Load:\u003c\/strong\u003e 2420 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel strap with glass-fiber-reinforced cheeks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1 (single block)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 year manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum line size for the Lewmar 72mm Synchro Block Single?\u003c\/strong\u003e The Lewmar 72mm Synchro Block Single (part 29927201BK) accepts line up to 7\/16 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the safe working load of this block?\u003c\/strong\u003e 2420 pounds is the safe working load rating for the Lewmar 72mm Synchro Block Single, 29927201BK.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the block weigh?\u003c\/strong\u003e This single block weighs 0.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this block come in?\u003c\/strong\u003e The 29927201BK is finished in black, as indicated by its part number suffix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the cheeks made of?\u003c\/strong\u003e Stiff glass-fiber-reinforced cheeks are used on the Lewmar 72mm Synchro Block Single to prevent lines from wedging during use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this block include a locking mechanism?\u003c\/strong\u003e Yes, the Lewmar 72mm Synchro Block Single has a tool-free sliding swivel locking mechanism, so it can be positioned and locked without extra tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the sheave stay aligned under load?\u003c\/strong\u003e A free-spin bearing and self-aligning head let the sheave in this Lewmar block rotate freely and follow the load angle, which helps transfer power smoothly and reduce rope wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a single block or a double block?\u003c\/strong\u003e The 29927201BK is a single-sheave block, supplied as one unit (unit count of 1).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outside diameter of the block?\u003c\/strong\u003e 72 millimeters is the outside diameter of the Lewmar Synchro Block, 29927201BK.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty does Lewmar provide on this block?\u003c\/strong\u003e A 3 year manufacturer warranty covers the Lewmar 72mm Synchro Block Single.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the block's strap made of?\u003c\/strong\u003e A stainless steel strap is used on the 29927201BK for improved strength and longer service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this block typically used for?\u003c\/strong\u003e The Lewmar 72mm Synchro Block Single is used to transfer power from deck to sail on control lines and sheets, reducing rope wear while handling loads up to its 2420 pound rating.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":49025132593371,"sku":"LEW-29927201BK","price":56.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/LEW-29925001BK__17650.1722385035.500.750.jpg?v=1785329118"},{"product_id":"lewmar-anchor-swivel-swivel312f-fixed-swivel-for-1-4-inch-and-5-16-inch-chain","title":"Lewmar Anchor Swivel SWIVEL312F, Fixed Swivel for 1\/4 Inch and 5\/16 Inch Chain","description":"\u003cp\u003eThe Lewmar SWIVEL312F is a fixed anchor swivel built for boats running 1\/4 inch or 5\/16 inch anchor chain. It attaches at the point where rope rode meets chain rode, giving a smooth, snag-free transition as the rode runs through the windlass gypsy. The swivel is calibrated for even pitch, so it feeds consistently through the gypsy wheel without binding or jumping, which keeps anchoring and retrieval smooth and predictable.\u003c\/p\u003e\u003cp\u003eThis swivel is designed to complement the rope-to-chain gypsies fitted to Lewmar windlasses, making it a natural match for boats already running Lewmar deck gear, while also serving any anchor rode set up with 1\/4 inch or 5\/16 inch chain. It is built from plastic for a lightweight, corrosion-resistant fitting at the rope-chain splice point. The SWIVEL312F is sold for use in the USA only.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lewmar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SWIVEL312F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Anchor Swivel (Fixed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain Compatibility:\u003c\/strong\u003e 1\/4 inch and 5\/16 inch chain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Groove Diameter:\u003c\/strong\u003e 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e USA only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned to complement the rope-chain gypsies fitted to Lewmar windlasses; suited to anchor rodes using 1\/4 inch or 5\/16 inch chain.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat chain sizes does the Lewmar SWIVEL312F fit?\u003c\/strong\u003e The SWIVEL312F is a fixed anchor swivel sized for 1\/4 inch and 5\/16 inch chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this swivel fixed or does it rotate freely?\u003c\/strong\u003e It is a fixed swivel design, part number SWIVEL312F, rather than a free-spinning swivel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SWIVEL312F made of?\u003c\/strong\u003e Plastic. The Lewmar SWIVEL312F uses a plastic construction rather than metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SWIVEL312F weigh?\u003c\/strong\u003e 1 pound, which is the listed weight for the Lewmar SWIVEL312F anchor swivel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this swivel work with my windlass gypsy?\u003c\/strong\u003e Yes, for 1\/4 inch and 5\/16 inch chain setups, since the SWIVEL312F is designed to complement the rope-chain gypsies fitted to Lewmar windlasses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'calibrated for even pitch' mean for this swivel?\u003c\/strong\u003e It means the SWIVEL312F is sized so the rope-to-chain transition feeds through the gypsy wheel at a consistent pitch, avoiding binding or jumping as the rode runs in and out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SWIVEL312F sold outside the USA?\u003c\/strong\u003e No, the Lewmar SWIVEL312F is sold for use in the USA only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Compatible Groove Diameter spec on this listing?\u003c\/strong\u003e 0.25 inches, which corresponds to the swivel's fit for 1\/4 inch chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SWIVEL312F fit larger chain like 3\/8 or 1\/2 inch?\u003c\/strong\u003e No. The SWIVEL312F is sized for 1\/4 inch and 5\/16 inch chain only; Lewmar's SWIVEL500F is the separate part number for 3\/8 inch, 1\/2 inch, and 7\/16 inch chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the SWIVEL312F?\u003c\/strong\u003e One Lewmar SWIVEL312F fixed anchor swivel, a single-piece unit.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":49025135083739,"sku":"LEW-SWIVEL312F","price":65.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51GAr2em7bL.jpg?v=1785331062"},{"product_id":"lewmar-anchor-swivel-swivel500f-for-3-8-inch-7-16-inch-and-1-2-inch-chain","title":"Lewmar Anchor Swivel SWIVEL500F for 3\/8 Inch, 7\/16 Inch, and 1\/2 Inch Chain","description":"\u003cp\u003eThe Lewmar SWIVEL500F is a fixed anchor swivel built to connect your anchor to your chain rode while allowing 360-degree rotation, which helps prevent the chain from twisting and kinking as the anchor sets and the boat swings at anchor. It uses stainless steel pins for corrosion resistance in the marine environment. The SWIVEL500F is sized for 3\/8 inch, 7\/16 inch, and 1\/2 inch anchor chain, making it suited to a range of mid-to-larger anchor rode setups. It is a genuine Lewmar part sold under its own part number, SWIVEL500F, and is available for sale in the USA. Each unit ships as a single swivel (Unit Count: 1). Boat owners running 3\/8, 7\/16, or 1\/2 inch chain who need a heavy-duty swivel connector between chain and anchor can use the SWIVEL500F as a direct fit for that chain range.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lewmar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SWIVEL500F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Anchor Swivel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain Compatibility:\u003c\/strong\u003e 3\/8 inch, 1\/2 inch, and 7\/16 inch chain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Heavy-duty, 360-degree swivel, stainless steel pins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.18125 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 07436834068740\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e USA only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat chain sizes fit the Lewmar SWIVEL500F anchor swivel?\u003c\/strong\u003e The SWIVEL500F is built for 3\/8 inch, 1\/2 inch, and 7\/16 inch anchor chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SWIVEL500F rotate a full 360 degrees?\u003c\/strong\u003e Yes, the SWIVEL500F is a heavy-duty 360-degree swivel, which helps keep chain from twisting as the anchor sets and the boat swings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the pins on the SWIVEL500F made of?\u003c\/strong\u003e The SWIVEL500F uses stainless steel pins for corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lewmar SWIVEL500F weigh?\u003c\/strong\u003e It weighs 1.18125 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SWIVEL500F available outside the USA?\u003c\/strong\u003e No, the Lewmar SWIVEL500F is listed as USA only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SWIVEL500F connect?\u003c\/strong\u003e The SWIVEL500F is an anchor swivel that connects the anchor to the chain rode on boats running 3\/8, 7\/16, or 1\/2 inch chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many units come in one order of SWIVEL500F?\u003c\/strong\u003e One anchor swivel is included per order (Unit Count: 1).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SWIVEL500F a genuine Lewmar part?\u003c\/strong\u003e Yes, SWIVEL500F is Lewmar's own part number for this fixed anchor swivel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the GTIN for the SWIVEL500F?\u003c\/strong\u003e The SWIVEL500F carries GTIN 07436834068740.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SWIVEL500F cross-reference to another manufacturer's part number?\u003c\/strong\u003e No OEM cross-reference or replacement numbers are published for the SWIVEL500F; it is sold under its own Lewmar part number.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":49025135116507,"sku":"LEW-SWIVEL500F","price":123.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51T2D1YIpUL.jpg?v=1785331062"},{"product_id":"lewmar-66840079-chain-stopper-with-lever-10mm-3-8-inch-chain-316-stainless-steel","title":"Lewmar 66840079 Chain Stopper with Lever, 10mm \/ 3\/8 Inch Chain, 316 Stainless Steel","description":"\u003cp\u003eThe Lewmar 66840079 is a cast 316 stainless steel chain stopper with lever-operated claw, built to secure ground tackle chain when the boat is at anchor and the windlass is not in use. A windlass is not designed to hold high anchoring loads on its own; a chain stopper transfers that load off the windlass gypsy and onto a dedicated load-bearing fitting, protecting the windlass motor and gearbox from strain during overnight anchoring or extended stops. The lever mechanism allows the claw to be opened and closed by hand to capture a chain link and lock the rode in place, then released quickly when it is time to weigh anchor.\u003c\/p\u003e\u003cp\u003eThis chain stopper is sized for 10mm (3\/8 inch) chain and is finished in 316 stainless steel for corrosion resistance in a marine environment. It is part of Lewmar's cast stainless chain stopper range, designed to combine a compact deck footprint with a secure, positive lock on the chain.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lewmar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 66840079\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Chain Stopper with Lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain Size:\u003c\/strong\u003e 10 mm \/ 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 18 x 10 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.18 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 743683328404\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits 10mm (3\/8 inch) anchor chain\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat chain size does the Lewmar 66840079 chain stopper fit?\u003c\/strong\u003e It is sized for 10mm (3\/8 inch) chain, matching the chain size stamped into the part number designation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I need a chain stopper if I already have a windlass?\u003c\/strong\u003e Windlasses are not designed to hold high loads while a boat is at anchor, so the chain should be secured with a chain stopper such as the Lewmar 66840079 whenever the windlass is not actively being used, taking the anchoring load off the windlass gearbox.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Lewmar 66840079 made from?\u003c\/strong\u003e It is made from cast 316 stainless steel, chosen for its corrosion resistance in saltwater and marine deck environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the lever on this chain stopper work?\u003c\/strong\u003e The Lewmar 66840079 uses a lever-operated claw that opens to capture a link of chain and closes to lock the rode in place, allowing quick release when it is time to raise anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Lewmar 66840079 chain stopper?\u003c\/strong\u003e The unit measures 18 x 10 x 6 inches and weighs 3.18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lewmar 66840079 chain stopper weigh?\u003c\/strong\u003e It weighs 3.18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this chain stopper be used with rope rode instead of chain?\u003c\/strong\u003e The Lewmar 66840079 is designed to secure chain; for rope rode, the rope should instead be attached to a load-bearing point such as a cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Lewmar 66840079 genuine Lewmar hardware?\u003c\/strong\u003e Yes, it is a genuine Lewmar part, number 66840079, from Lewmar's cast stainless chain stopper range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should the chain stopper be engaged?\u003c\/strong\u003e It should be engaged whenever the boat is at anchor and the windlass is not in use, so the anchoring load is held by the chain stopper rather than the windlass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Lewmar 66840079 include mounting hardware?\u003c\/strong\u003e The listing covers the Lewmar 66840079 chain stopper with lever and claw assembly; check the specific dimensions and deck layout before ordering to confirm it suits your installation.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":49025138065627,"sku":"LEW-66840079","price":250.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/img_bc423d9b-0bc2-4d98-a9fb-4aa3811e464b.jpg?v=1785332733"},{"product_id":"lewmar-anchor-lock-anchor-roller-and-mount-hardware-part-66840071","title":"Lewmar Anchor Lock, Anchor Roller and Mount Hardware, Part 66840070","description":"\u003cp\u003eThe Lewmar Anchor Lock secures an anchor in place at the bow roller so it cannot shift, rattle, or work loose while underway. It is designed to be used with an anchor roller and mount setup, holding the anchor firmly against the roller assembly for a quieter, more secure ride at anchor and during transit. This is a genuine Lewmar component, identified by Lewmar part number 66840070, and is intended for boat owners who want a dedicated locking solution rather than relying on rope or an improvised tie-down to keep the anchor from moving.\u003c\/p\u003e\u003cp\u003eAnchor movement at the bow is a common source of hull scratching, gelcoat damage, and noise on the water, and a purpose-built lock like this addresses that directly by constraining the anchor once it is stowed. Because it is sold as a standalone Lewmar part, it is a straightforward option for boat owners replacing a worn or missing anchor lock on an existing Lewmar roller and mount system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lewmar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 66840070\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Anchor Lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Anchor Rollers and Mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.525 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 743683327858\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Lewmar 66840070 anchor lock used for?\u003c\/strong\u003e It secures an anchor at the bow roller so the anchor cannot shift or rattle while stowed or underway, part of Lewmar's anchor roller and mount lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Lewmar part?\u003c\/strong\u003e Yes, this anchor lock is manufactured by Lewmar and carries Lewmar part number 66840070.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lewmar anchor lock weigh?\u003c\/strong\u003e It weighs 0.525 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of hardware does part 66840070 belong to?\u003c\/strong\u003e Lewmar part 66840070 is listed under anchor rollers and mounts, the hardware category covering bow-mounted anchor stowage components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this anchor lock fit any anchor roller?\u003c\/strong\u003e Lewmar part 66840070 is designed to work with an anchor roller and mount setup; specific roller model compatibility should be confirmed against your existing Lewmar hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Lewmar Anchor Lock, part number 66840070, has UPC 743683327858.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need an anchor lock instead of just tying off the anchor?\u003c\/strong\u003e An anchor lock holds the anchor firmly against the roller, preventing the movement, noise, and hull scratching that can happen when an anchor is only tied down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Lewmar anchor lock sold as a single part?\u003c\/strong\u003e Yes, part number 66840070 is sold as a standalone Lewmar anchor lock component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this be used to replace a worn or missing anchor lock?\u003c\/strong\u003e Yes, the Lewmar 66840070 is intended as a replacement or standalone anchor lock for existing Lewmar roller and mount setups.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":49025137836251,"sku":"LEW-66840070","price":44.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/img_aa208375-47e8-405a-bfbe-3b7a2062890d.jpg?v=1785332747"},{"product_id":"whitecap-industries-3-8-inch-black-nylon-rope-thimble-3650bp","title":"Whitecap 3\/8 Inch Black Nylon Rope Thimble - 3650BP","description":"\u003cp\u003eThe Whitecap 3650BP is a 3\/8 inch rope thimble made from black nylon, designed to reinforce and protect the eye of a spliced rope. Fitting inside a rope's eye splice, the thimble keeps the loop open and prevents chafing where the rope meets a shackle, cleat, or other hardware, extending the working life of the line. Its nylon construction resists corrosion and will not rust, making it a practical choice around saltwater and marine environments where metal thimbles can degrade.\u003c\/p\u003e\u003cp\u003eSized for 3\/8 inch rope, the 3650BP is a straightforward replacement part for anchor rode, dock lines, or other rigging that uses a spliced eye. The black finish blends with dark rope and rigging for a clean, low-visibility look.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Whitecap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 3650BP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Size:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat rope size does the Whitecap 3650BP thimble fit?\u003c\/strong\u003e The Whitecap 3650BP is sized for 3\/8 inch rope.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 3650BP thimble made from?\u003c\/strong\u003e It is made from black nylon, which resists corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Whitecap 3650BP thimble?\u003c\/strong\u003e It comes in a black finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 3650BP thimble weigh?\u003c\/strong\u003e The Whitecap 3650BP weighs 0.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a rope thimble used for?\u003c\/strong\u003e A rope thimble like the 3650BP fits inside a spliced eye in a rope to hold the loop open and protect the rope from chafing against a shackle or other hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 3650BP thimble rust-proof?\u003c\/strong\u003e Yes, because the Whitecap 3650BP is made of nylon rather than metal, it will not rust or corrode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 3650BP be used for anchor rode?\u003c\/strong\u003e The 3\/8 inch sizing of the Whitecap 3650BP makes it suitable for anchor rode and dock lines using a matching rope diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Whitecap 3650BP a genuine Whitecap part?\u003c\/strong\u003e Yes, the 3650BP is manufactured by Whitecap Industries under its own part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 3650BP thimble require any tools to install?\u003c\/strong\u003e No special tools are needed; the Whitecap 3650BP is fitted into a rope splice during the splicing process.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the 3650BP?\u003c\/strong\u003e The Whitecap 3650BP ships as a single rope thimble.\u003c\/p\u003e","brand":"Whitecap Industries","offers":[{"title":"Default Title","offer_id":49025280409819,"sku":"W-C-3650BPC","price":2.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/21KPCSFRETL.jpg?v=1785331060"},{"product_id":"anchorlift-anchor-safety-strap-490-lb-breaking-load-fits-1-4-5-16-3-8-chain","title":"AnchorLift Anchor Safety Strap - 490 lb Breaking Load, Fits 1\/4\", 5\/16\", 3\/8\" Chain","description":"\u003cp\u003eThe AnchorLift Anchor Safety Strap secures the anchor while the boat is underway, keeping it locked in place at the bow roller so it cannot shift, rattle, or work loose from wave action and rough water. Attaching between the anchor or chain and a fixed point on the boat, the strap takes the load off the windlass and gypsy during transit, which helps prevent unnecessary wear on the windlass system.\u003c\/p\u003e\u003cp\u003eRated to a 490 lbs. Breaking load, the strap is sized to work with common anchor chain sizes of 1\/4 inch, 5\/16 inch, and 3\/8 inch, making it a versatile fit for a range of anchor and windlass setups. It is a simple, low-cost addition to any ground tackle system for boaters who want extra peace of mind that their anchor will stay put while running.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e AnchorLift\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 91406\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking Load:\u003c\/strong\u003e 490 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain Size Compatibility:\u003c\/strong\u003e 1\/4 inch, 5\/16 inch, 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for anchor chain in 1\/4 inch, 5\/16 inch, and 3\/8 inch sizes; compatible with anchor and windlass setups using these chain sizes.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the breaking load of the AnchorLift Anchor Safety Strap?\u003c\/strong\u003e The AnchorLift Anchor Safety Strap has a breaking load of 490 lbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat chain sizes does this safety strap work with?\u003c\/strong\u003e It is sized for 1\/4 inch, 5\/16 inch, and 3\/8 inch anchor chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does an anchor safety strap do?\u003c\/strong\u003e It secures the anchor in place while the boat is underway, preventing it from shifting or working loose at the bow roller during travel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AnchorLift Anchor Safety Strap weigh?\u003c\/strong\u003e The strap weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the anchor safety strap replace my windlass or gypsy for holding the anchor during transit?\u003c\/strong\u003e Yes, that is its purpose: the strap holds the anchor secure while underway so the windlass and gypsy are not relied on to keep the anchor in place during travel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this strap fit my 5\/16 inch chain?\u003c\/strong\u003e Yes, the AnchorLift Anchor Safety Strap is compatible with 5\/16 inch chain, along with 1\/4 inch and 3\/8 inch sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AnchorLift Anchor Safety Strap a genuine AnchorLift part?\u003c\/strong\u003e Yes, part number 91406 is a genuine AnchorLift Anchor Safety Strap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this strap be used with different anchor and windlass setups?\u003c\/strong\u003e Because it fits 1\/4 inch, 5\/16 inch, and 3\/8 inch chain, the AnchorLift Anchor Safety Strap works across a range of common anchor and windlass configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the AnchorLift Anchor Safety Strap?\u003c\/strong\u003e The product is the anchor safety strap itself, part number 91406.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need an anchor safety strap if I already have a windlass?\u003c\/strong\u003e A windlass holds the anchor for deployment and retrieval, but the AnchorLift Anchor Safety Strap adds a secure, dedicated hold-down for the anchor while the boat is underway, reducing strain on the windlass and gypsy.\u003c\/p\u003e","brand":"Anchorlift","offers":[{"title":"Default Title","offer_id":49027427303643,"sku":"ACL-91406","price":150.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/91406__12159.1722516004.500.750.jpg?v=1785163279"},{"product_id":"windline-stainless-steel-anchor-tensioner-at3-holds-anchors-up-to-90-lbs","title":"Windline Stainless Steel Anchor Tensioner AT3 - Holds Anchors Up to 90 lbs","description":"\u003cp\u003eThe Windline AT3 Stainless Steel Anchor Tensioner is a heavy duty anchor holder designed to keep an anchor securely in place and prevent rattling while underway. Its patented design accommodates any size chain or shackle, making it a versatile fit for a wide range of anchor setups. The tensioner is built from electro-plated stainless steel for corrosion resistance in a marine environment, and it is backed by a lifetime warranty. It is rated to hold anchors up to 90 lbs, making it suitable for a broad range of boat sizes and anchor weights. With an overall length of 4.5 inches and an overall width of 2 inches, the AT3 is compact enough to mount in typical bow anchor pulpit or roller setups without adding bulk. The tensioner works by clamping down on the anchor chain or shackle, holding the anchor firmly against the bow roller or pulpit so it cannot shift, swing, or bang against the hull during transit. This eliminates the rattling and clanging noise that loose anchors commonly produce, protecting both the anchor and the boat's finish. Installation is straightforward and does not require permanent modification to the anchor rigging.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Windline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AT3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Stainless Steel Anchor Tensioner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Electro-plated stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Width:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.79375 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Anchor Weight:\u003c\/strong\u003e 90 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 798772100072\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum anchor weight the Windline AT3 can hold?\u003c\/strong\u003e The Windline AT3 Anchor Tensioner is rated to hold anchors up to 90 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the AT3 anchor tensioner made of?\u003c\/strong\u003e It is made of electro-plated stainless steel, giving it corrosion resistance for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the AT3 fit any size anchor chain or shackle?\u003c\/strong\u003e Yes, the patented design of the AT3 accommodates any size chain or shackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the AT3 anchor tensioner?\u003c\/strong\u003e The AT3 has an overall length of 4.5 inches and an overall width of 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AT3 anchor tensioner weigh?\u003c\/strong\u003e The AT3 weighs 0.79375 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AT3 come with a warranty?\u003c\/strong\u003e Yes, the Windline AT3 is backed by a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the AT3 anchor tensioner do?\u003c\/strong\u003e It holds the anchor securely to prevent rattling against the bow or hull while the boat is underway.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AT3 anchor tensioner difficult to install?\u003c\/strong\u003e No, the AT3 clamps onto the existing anchor chain or shackle and does not require permanent modification to the anchor rigging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the AT3 anchor tensioner?\u003c\/strong\u003e The AT3 is manufactured by Windline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AT3 anchor tensioner suitable for stainless steel anchor rigging?\u003c\/strong\u003e Yes, being electro-plated stainless steel, the AT3 is designed to hold up in a marine environment alongside stainless anchor hardware.\u003c\/p\u003e","brand":"Windline","offers":[{"title":"Default Title","offer_id":49028255482075,"sku":"WIN-AT3","price":85.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__70296.1763741549.500.750.jpg?v=1785165761"},{"product_id":"worth-anchor-mate-line-leveler-guide-15200-stainless-steel-with-nylon-sheave-for-1-4-inch-anchor-line","title":"Worth Anchor Mate Line Leveler Guide 15200, Stainless Steel with Nylon Sheave for 1\/4 Inch Anchor Line","description":"\u003cp\u003eThe Worth Anchor Mate Line Leveler Guide (part number 15200) is designed to feed anchor line onto the center of a Worth AnchorMate reel, preventing the line from building up unevenly on either end of the spool as it winds in and out. Even line distribution keeps the reel spooling smoothly and reduces wear on both the line and the reel itself over repeated use.\u003c\/p\u003e\u003cp\u003eBuilt for durability in a marine environment, the guide is constructed of stainless steel with a nylon sheave that resists wear and corrosion from saltwater and sun exposure. It is sized for use with anchor line up to 1\/4 inch in diameter, matching the line capacity of Worth AnchorMate reel systems.\u003c\/p\u003e\u003cp\u003eInstallation hardware is not included, since fasteners such as screws and bolts vary depending on the boat hull material being mounted to. Each unit ships as one guide per card, making it a straightforward, affordable replacement or addition for any boat already running a Worth AnchorMate anchor control system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Worth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Anchor Mate Line Leveler Guide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel with nylon sheave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Anchor Line Diameter:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 033709152008\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e One guide per card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eWorth AnchorMate anchor control systems using up to 1\/4 inch anchor line\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Worth Line Leveler Guide (part number 15200) do?\u003c\/strong\u003e It feeds anchor line onto the center of a Worth AnchorMate reel, which prevents the line from building up unevenly on either end of the spool as it winds in and out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size anchor line works with this guide?\u003c\/strong\u003e The Worth 15200 Line Leveler Guide is designed for use with anchor line up to 1\/4 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Line Leveler Guide made of?\u003c\/strong\u003e It is made of stainless steel with a nylon sheave, materials chosen to resist corrosion and wear in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting screws or bolts included with part 15200?\u003c\/strong\u003e No, fasteners such as screws and bolts are not included, since the correct hardware depends on the specific boat hull material being mounted to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many guides come in one package?\u003c\/strong\u003e The Worth 15200 Line Leveler Guide ships one guide per card.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Line Leveler Guide weigh?\u003c\/strong\u003e It weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 15200 Line Leveler Guide work with any anchor reel?\u003c\/strong\u003e The guide is designed specifically to feed line onto the center of a Worth AnchorMate reel to keep the spool winding evenly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Worth Line Leveler Guide?\u003c\/strong\u003e The UPC for part number 15200 is 033709152008.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would a spool need a line leveler guide at all?\u003c\/strong\u003e Without a leveler guide, anchor line can pile up unevenly on one end of the reel spool as it winds, which the 15200 guide prevents by centering the line feed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Worth 15200 guide resistant to rust and corrosion?\u003c\/strong\u003e Yes, its stainless steel body and nylon sheave are built to resist wear and corrosion in marine conditions.\u003c\/p\u003e","brand":"Worth Company","offers":[{"title":"Default Title","offer_id":49029532319963,"sku":"WOR-15200","price":8.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__14661.1763741551.500.750.jpg?v=1785165856"},{"product_id":"worth-15100-stainless-steel-swivel-pulley-and-line-guide-set-for-anchor-mate-anchor-control-systems","title":"Worth 15100 Stainless Steel Swivel Pulley and Line Guide Set for Anchor Mate Anchor Control Systems","description":"\u003cp\u003eThe Worth 15100 Swivel Pulley and Line Guide Set is a stainless steel hardware kit designed to route and guide anchor line smoothly along the hull of a boat. It is built for use with Worth Anchor Mate anchor control systems, providing the pulley and guide points needed to direct anchor line from the reel to the bow fixture without chafing or binding. The set includes one swivel pulley and two line guides, all machined from stainless steel with nylon sheaves that resist wear and corrosion from constant line contact and saltwater exposure. The nylon sheaves turn smoothly to keep the anchor line feeding consistently each time the anchor is raised or lowered, and the swivel design on the pulley allows it to pivot and align with the line's angle of pull, reducing wear on both the line and the hardware. This set is rated for use with anchor line up to 1\/4 inch in diameter, matching common anchor rode sizes used with Worth Anchormate and Anchormate II systems. Installation is straightforward and the pulley and line guides can be mounted at almost any point along the hull where line routing is needed, making the set adaptable to a wide range of boat layouts. Mounting fasteners such as screws or bolts are not included, since hull material and thickness vary from boat to boat and the correct fastener type depends on the installation surface.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Worth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Swivel Pulley and Line Guide Set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 1 swivel pulley, 2 line guides\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel with nylon sheaves\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Silver metallic stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Anchor Line Size:\u003c\/strong\u003e Up to 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 033709151001\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Worth 15100 set?\u003c\/strong\u003e The Worth 15100 set includes one swivel pulley and two line guides, all made of stainless steel with nylon sheaves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size anchor line does this pulley and guide set work with?\u003c\/strong\u003e The Worth 15100 swivel pulley and line guides are rated for use with anchor line up to 1\/4 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting screws or bolts included with the 15100 set?\u003c\/strong\u003e No, fasteners such as screws or bolts are not included with the Worth 15100 set because the correct fastener depends on the boat's hull material and thickness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the swivel pulley and line guide set made of?\u003c\/strong\u003e Both the swivel pulley and the line guides in part number 15100 are constructed of stainless steel with nylon sheaves that resist wear and corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the pulley rotate or swivel?\u003c\/strong\u003e Yes, the pulley in the Worth 15100 set is a swivel-style pulley, allowing it to pivot and align with the direction of line pull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this compatible with the Worth Anchormate anchor control system?\u003c\/strong\u003e Yes, the 15100 swivel pulley and line guide set is designed for use with Worth Anchor Mate anchor control systems to route and guide anchor line along the hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Worth 15100 set weigh?\u003c\/strong\u003e The Worth 15100 swivel pulley and line guide set weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should the swivel pulley and line guides be mounted?\u003c\/strong\u003e The Worth 15100 pulley and guides can be mounted in virtually any location along the hull needed to route anchor line smoothly, since they are designed to work with a variety of installation points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The UPC for the Worth 15100 swivel pulley and line guide set is 033709151001.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use nylon sheaves instead of metal pulleys?\u003c\/strong\u003e The nylon sheaves used on the Worth 15100 pulley and line guides resist wear and corrosion from repeated contact with anchor line and exposure to water, giving smoother and longer-lasting operation than bare metal wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this set be used on both sides of the boat?\u003c\/strong\u003e The Worth 15100 line guides and swivel pulley are not side-specific and can be installed at any convenient location on the hull as needed for the anchor line run.\u003c\/p\u003e","brand":"Worth Company","offers":[{"title":"Default Title","offer_id":49029532287195,"sku":"WOR-15100","price":10.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/WOR-15100_lg__96279.1558135184.500.750.jpg?v=1785165856"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/6864_aecde7ac-a40f-4abb-9a98-1aa34906370a.jpg?v=1785356939","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-anchoring-mooring-anchoring-hardware-shackles-swivels-chain-stoppers.oembed?page=2","provider":"Good Vibes Marina","version":"1.0","type":"link"}