{"title":"Grapnel \u0026 Specialty Anchors","description":null,"products":[{"product_id":"gen3-marine-7-slip-ring-fluke-anchor-galvanized-steel-4-2-lb-for-boats-24-ft-to-29-ft-mpn-5-2004","title":"Gen3 Marine #7 Galvanized Slip-Ring Fluke Anchor, 4.2 lb, for Boats 24 to 29 Feet","description":"\u003cp\u003eThe Gen3 Marine #7 Slip-Ring Fluke Anchor (5-2004) is a galvanized steel anchor built for boats 24 to 29 feet in length. Its fluke design is engineered for quick penetration and a strong hold in mud and sand, making it a dependable choice for anglers and cruisers who anchor in shallow water.\u003c\/p\u003e\u003cp\u003eWhat sets this anchor apart is its slip-ring design: instead of the chain attaching to a fixed point on the shank, the ring slides freely toward the fluke as you pull. This lets the fluke rotate and release from the bottom far more easily than a standard fixed anchor, cutting down on the frustration of a snagged anchor that will not break free. The galvanized steel construction provides lasting corrosion protection for repeated use in fresh or salt water.\u003c\/p\u003e\u003cp\u003eSized for boats in the 24 to 29 foot range, the #7 Slip-Ring Fluke Anchor is best suited to muddy or sandy bottoms in shallow water, where its digging fluke geometry performs best.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-2004\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Type:\u003c\/strong\u003e Slip-Ring Fluke Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 15 x 3.75 x 14.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 24 to 29 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bottom Type:\u003c\/strong\u003e Mud and sand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037461732\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Gen3 Marine #7 Slip-Ring Fluke Anchor made for?\u003c\/strong\u003e This anchor, Gen3 Marine part number 5-2004, is designed for boats 24 to 29 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a slip-ring anchor and how is it different from a standard fluke anchor?\u003c\/strong\u003e On the 5-2004 slip-ring anchor, the chain ring is free to slide along the shank toward the fluke as tension is applied, which lets the fluke break free from the bottom more easily than a fixed-ring fluke anchor. This makes retrieval easier in conditions where anchors commonly snag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bottom types does this anchor work best in?\u003c\/strong\u003e The Gen3 Marine #7 Slip-Ring Fluke Anchor performs best in mud and sand, where its fluke design achieves quick penetration and a strong hold in shallow water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Gen3 Marine 5-2004 anchor weigh?\u003c\/strong\u003e The anchor weighs 4.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the #7 Slip-Ring Anchor made from?\u003c\/strong\u003e It is made from galvanized steel, which provides lasting corrosion protection for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Gen3 Marine #7 anchor?\u003c\/strong\u003e The anchor measures 15 x 3.75 x 14.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the slip-ring design help if my anchor gets snagged?\u003c\/strong\u003e Yes. Because the ring on the 5-2004 anchor slides toward the fluke under tension, it is easier to retrieve when snagging is common, compared to anchors with a fixed attachment point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Gen3 Marine #7 anchor suitable for saltwater use?\u003c\/strong\u003e The anchor's galvanized steel construction is built to resist corrosion, making it suitable for both freshwater and saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with the Gen3 Marine 5-2004 anchor?\u003c\/strong\u003e The product is the #7 Slip-Ring Fluke Anchor itself; rode, chain, and shackles are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this anchor be used in deep or rocky water?\u003c\/strong\u003e The Gen3 Marine #7 Slip-Ring Fluke Anchor is intended for shallow water with mud or sand bottoms rather than deep or rocky conditions.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991665651931,"sku":"GEN-5-2004","price":12.57,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41rX2neSHWL.jpg?v=1784509575"},{"product_id":"gen3-marine-10-slip-ring-anchor-4-4-lb-galvanized-fluke-anchor-for-boats-21-to-25-ft-mpn-5-2005","title":"Gen3 Marine #10 Galvanized Slip-Ring Anchor, 4.4 lb, for Boats 21-25 Feet","description":"\u003cp\u003eThe Gen3 Marine #10 Slip-Ring Anchor is a 4.4 pound galvanized steel fluke anchor sized for boats 21 to 25 feet in length. Its slip-ring design lets the anchor chain slide freely toward the fluke, which reduces snagging and makes retrieval faster and easier compared to a fixed-shackle anchor. The fluke shape is built to achieve quick penetration and a strong hold in mud and sand, making this anchor best suited to shallow waters with soft bottoms rather than rocky or hard-packed terrain.\u003c\/p\u003e\u003cp\u003eThe galvanized steel construction provides lasting corrosion protection in both fresh and salt water environments, standing up to repeated deployment and retrieval without rusting through. The anchor measures 15 x 3 x 17 inches, a compact profile that stows easily in an anchor locker or bow compartment. For boaters who have dealt with a fluke anchor stuck fast in the bottom, the slip-ring feature is the key upgrade: instead of hauling straight up against a buried fluke, the ring lets the pull angle change so the anchor breaks free with less effort.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-2005\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Type:\u003c\/strong\u003e Fluke (slip-ring design)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 15 x 3 x 17 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 21 to 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bottom Type:\u003c\/strong\u003e Mud and sand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037461749\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Gen3 Marine 5-2005 anchor designed for?\u003c\/strong\u003e The Gen3 Marine #10 Slip-Ring Anchor (part number 5-2005) is designed for boats 21 to 25 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the slip-ring design do on this anchor?\u003c\/strong\u003e The slip-ring on the Gen3 Marine 5-2005 allows the chain to slide toward the fluke, which changes the pull angle on the anchor and makes it much easier to break free and retrieve when it has snagged in the bottom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bottom types does this anchor work best in?\u003c\/strong\u003e The 5-2005 slip-ring anchor performs best in mud and sand, where its fluke design achieves quick penetration and a strong hold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Gen3 Marine 5-2005 anchor weigh?\u003c\/strong\u003e This anchor weighs 4.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Gen3 Marine slip-ring anchor?\u003c\/strong\u003e The 5-2005 anchor measures 15 x 3 x 17 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 5-2005 anchor made from?\u003c\/strong\u003e It is made from galvanized steel, which provides lasting corrosion protection for use in the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this anchor work in rocky bottoms?\u003c\/strong\u003e No, the Gen3 Marine 5-2005 is recommended for mud and sand bottoms rather than rocky or hard-packed terrain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 5-2005 anchor purchase?\u003c\/strong\u003e The Gen3 Marine 5-2005 is sold as the anchor itself; chain, rope, and shackles are not included and are purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the slip-ring anchor different from a standard fluke anchor?\u003c\/strong\u003e Unlike a standard fixed-shackle fluke anchor, the Gen3 Marine 5-2005 uses a slip-ring that lets the chain travel along the shank toward the fluke, reducing the snagging that makes standard fluke anchors hard to pull free.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Gen3 Marine 5-2005 anchor galvanized for saltwater use?\u003c\/strong\u003e Yes, the anchor is constructed from galvanized steel, which resists corrosion in both saltwater and freshwater conditions.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991665914075,"sku":"GEN-5-2005","price":13.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41rX2neSHWL_7ef1a028-9a30-4638-ba8f-216415c0b7b5.jpg?v=1784509594"},{"product_id":"gen3-marine-13-lb-galvanized-folding-box-anchor-with-storage-bag-mpn-5-4004","title":"Gen3 Marine 13 lb Galvanized Folding Box Anchor with Storage Bag","description":"\u003cp\u003eThe Gen3 Marine 13 lb Folding Box Anchor is a galvanized folding anchor built for small to mid-size boats used on lakes and rivers. Its collapsible design uses a stabilizing arm that folds flat for compact storage, then opens to set quickly on the bottom. The small surface area of the folded profile allows the anchor to release straight down without tangling on deck hardware or a bow roller, which makes retrieval simpler than bulkier anchor styles. The galvanized steel finish resists corrosion in fresh and salt water environments, extending the working life of the anchor compared to uncoated steel. This anchor is designed to grip and hold across a range of bottom conditions, giving boaters control over where the anchor sets rather than dragging until it catches. A matching storage bag is included, keeping the folded anchor and its arm contained and protecting other gear in the boat from scuffing or rust transfer while stowed. At 14.7 pounds, it is sized for boaters who want a compact, easy-to-handle anchor that does not require a windlass to deploy or retrieve by hand. This anchor suits lake, river, and calm inshore anchoring where a folding, low-profile design is preferred over a fixed-fluke anchor.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-4004\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 13 lb Folding Box Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Folding, collapsible stabilizing arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Accessories:\u003c\/strong\u003e Storage bag\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Lake and river anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037461831\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Gen3 Marine 5-4004 anchor weigh?\u003c\/strong\u003e The Gen3 Marine 13 lb Folding Box Anchor (part number 5-4004) weighs 14.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor galvanized?\u003c\/strong\u003e Yes, the Gen3 Marine 5-4004 folding box anchor has a galvanized finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the anchor fold for storage?\u003c\/strong\u003e It does. The 5-4004 uses a collapsible stabilizing arm so the anchor folds down into a compact profile when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it come with a storage bag?\u003c\/strong\u003e A storage bag is included with the Gen3 Marine 5-4004 to keep the folded anchor contained while stowed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of boats is this anchor designed for?\u003c\/strong\u003e This folding box anchor is designed for lake and river use on small to mid-size boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the anchor release straight down instead of tangling?\u003c\/strong\u003e Its small folded surface area lets the Gen3 Marine 5-4004 drop straight down for a clean release rather than catching on deck hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 5-4004 anchor made from?\u003c\/strong\u003e The anchor is made from galvanized steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this anchor hold in different bottom conditions?\u003c\/strong\u003e Yes, the folding design of the 5-4004 is built to set and hold across varying bottom conditions, giving the user control over placement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a windlass required to use this anchor?\u003c\/strong\u003e No, the 13 lb size of the Gen3 Marine 5-4004 is intended for manual deployment and retrieval without a windlass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 5-4004 anchor?\u003c\/strong\u003e The package includes the Gen3 Marine folding box anchor and a matching storage bag.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991676924123,"sku":"GEN-5-4004","price":42.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31_04W6FiuL.jpg?v=1784509688"},{"product_id":"gen3-marine-25-lb-galvanized-folding-box-anchor-with-storage-bag","title":"Gen3 Marine 25 lb Galvanized Folding Box Anchor with Storage Bag","description":"\u003cp\u003eThis Gen3 Marine folding box anchor is a 25 pound galvanized anchor built for small to mid-size boats used on lakes and rivers. Its collapsible, square folding design uses a stabilizing arm that lets the anchor fold flat for easy storage and unfold quickly for use, and it comes with its own storage bag so it can be stowed without scratching the hull or other gear. The galvanized finish resists corrosion and rust, making it suitable for repeated use in fresh water environments. The box anchor style is designed with a small surface area that allows the anchor to release straight up off the bottom, so it can be freed without dragging or snagging, while still giving the operator good control over placement and reliable holding regardless of bottom condition. At 25 pounds, this anchor is sized for boats that need more holding weight than a small folding anchor provides, while still remaining compact enough to fold down for storage in an anchor locker, bag, or storage compartment. It is sold as a complete anchor with no additional hardware required beyond a rode to attach it to. This anchor is well suited for boaters on lakes and rivers who want a foldable, storable anchor rather than a fixed fluke or mushroom anchor that takes up more space.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-4006\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 27.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 25 x 10.5 x 6.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Type:\u003c\/strong\u003e Folding box (square) anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Storage bag\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Lake and river anchor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Gen3 Marine 5-4006 anchor weigh?\u003c\/strong\u003e The Gen3 Marine 5-4006 folding box anchor weighs 27.8 pounds as packaged, with the anchor itself rated at 25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this anchor?\u003c\/strong\u003e The Gen3 Marine box anchor measures 25 x 10.5 x 6.25 inches, a compact footprint made possible by its folding square design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this anchor fold for storage?\u003c\/strong\u003e Yes, part number 5-4006 is a folding box anchor with a collapsible stabilizing arm, allowing it to fold flat for storage and open for use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the anchor?\u003c\/strong\u003e The Gen3 Marine 25 lb anchor ships with a storage bag for keeping the folded anchor contained and protecting other gear from contact with it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the anchor have and why does it matter?\u003c\/strong\u003e A galvanized finish is applied to the 5-4006 anchor for corrosion and rust resistance during regular use in the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor suitable for river use as well as lakes?\u003c\/strong\u003e Yes, the Gen3 Marine box anchor is categorized for both lake and river use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a folding box anchor release from the bottom compared to other anchor types?\u003c\/strong\u003e The box anchor design has a small surface area that lets it release straight up off the bottom, helping it come free without dragging, while still holding securely when set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this anchor hold well in different bottom conditions?\u003c\/strong\u003e The folding design of the 5-4006 anchor is built to give the operator control over placement and to set regardless of bottom condition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the 25 lb Gen3 Marine anchor meant for?\u003c\/strong\u003e At 25 pounds, this Gen3 Marine folding box anchor is sized for small to mid-size boats on lakes and rivers that need more holding weight than a smaller folding anchor provides.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs any additional hardware needed to use this anchor?\u003c\/strong\u003e No, the Gen3 Marine 5-4006 is sold as a complete anchor; only an anchor rode is needed to attach and deploy it.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991677710555,"sku":"GEN-5-4006","price":121.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31_04W6FiuL_da32e86c-1a3e-4f75-be67-d53e6ab2bff7.jpg?v=1784509706"},{"product_id":"gen3-marine-25-lb-box-anchor-316-stainless-steel-fold-flat-lake-and-river-anchor-with-storage-bag","title":"Gen3 Marine 25 lb Box Anchor, 316 Stainless Steel, Boxed with Logo Bag","description":"\u003cp\u003eThe Gen3 Marine 25 lb Box Anchor is a folding box-style anchor built from 316 stainless steel, designed to hold small to mid-size boats on lakes and rivers. Its collapsible box design lets it fold flat for compact storage while still delivering strong holding power in a variety of bottom conditions typical of inland waters. The 316 stainless steel construction resists corrosion, making it a durable choice for repeated use in wet marine environments. This anchor is sold boxed and includes a logo carry bag for storage and transport, so it is ready to stow aboard as soon as it arrives. It is a straightforward, no-frills anchoring solution for boaters who want a compact, corrosion-resistant anchor without the bulk of a traditional fluke or plow anchor.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-4016\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 25LB Box Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Weight Class:\u003c\/strong\u003e 25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Folding box anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Accessories:\u003c\/strong\u003e Logo carry bag\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Boxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Lake and river anchoring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Gen3 Marine 25 lb Box Anchor designed for?\u003c\/strong\u003e This is a 25 pound box anchor intended for lake and river use on small to mid-size boats; it is part of Gen3 Marine's lake and river anchor lineup (part number 5-4016).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 5-4016 box anchor made from?\u003c\/strong\u003e It is made from 316 stainless steel, a grade chosen for its resistance to corrosion in wet marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the anchor fold for storage?\u003c\/strong\u003e Yes, the Gen3 Marine 25LB Box Anchor uses a folding box design that collapses flat for more compact stowage aboard the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this anchor?\u003c\/strong\u003e The Gen3 Marine 25 lb Box Anchor (5-4016) ships boxed and includes a logo carry bag for storing and transporting the anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor rated for saltwater use?\u003c\/strong\u003e The anchor is built from 316 stainless steel, which is well suited to resisting corrosion in wet marine environments including saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of anchor is this?\u003c\/strong\u003e The 5-4016 is listed as a lake and river anchor, making it suited to inland waterway anchoring rather than heavy offshore ground tackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 25 lb rating the shipping weight or the anchor's size class?\u003c\/strong\u003e The 25LB designation in the product name for part number 5-4016 refers to the anchor's weight class or size, identifying it within the box anchor lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the anchor come with rope or chain?\u003c\/strong\u003e The listing for the Gen3 Marine 5-4016 Box Anchor covers the anchor itself and its logo carry bag; no rope or chain is specified as included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the anchor packaged for shipping?\u003c\/strong\u003e The Gen3 Marine 25 lb Box Anchor (5-4016) is shipped boxed, with a logo bag included for the anchor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes part number 5-4016?\u003c\/strong\u003e Part number 5-4016 is manufactured by Gen3 Marine as part of its box anchor lineup for lakes and rivers.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991678628059,"sku":"GEN-5-4016","price":215.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_742e099c-02d8-4982-9caf-f8d2a5c88ed3.jpg?v=1785349356"},{"product_id":"gen3-marine-16-5-beach-screw-anchor-kit-for-pwc-and-shallow-water-with-storage-bag-line-and-clip","title":"Gen3 Marine 16.5 Inch Beach Screw Anchor Kit for PWC and Small Watercraft","description":"\u003cp\u003eThe Gen3 Marine Beach Screw Anchor Kit is designed for anchoring in shallow water or right off the beach, making it a practical choice for securing a personal watercraft or other small watercraft close to shore. The anchor has a screw length of 16.5 inches and is built to twist into compact sand or mud in about 2 to 3 feet of water. Its portable, easy-to-use design means it can be carried aboard and deployed without special tools or rigging.\u003c\/p\u003e\u003cp\u003eThe kit comes complete with a storage bag, a line, and a clip, so everything needed to anchor is included in one package. Setup is straightforward: attach one clip to the boat and the other to the anchor, then screw the anchor into the bottom. This makes it well suited for riders who want a quick, no-fuss way to hold a PWC in place in shallow water near a beach or shoreline.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-4021\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e PWC Anchors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Screw Length:\u003c\/strong\u003e 16.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Water Depth:\u003c\/strong\u003e 2 to 3 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bottom Type:\u003c\/strong\u003e Compact sand or mud\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Items:\u003c\/strong\u003e Anchor, storage bag, line, and clip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037461893\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the screw length of the Gen3 Marine Beach Screw Anchor Kit?\u003c\/strong\u003e The anchor screw on part number 5-4021 measures 16.5 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat water depth is this anchor kit designed for?\u003c\/strong\u003e This anchor kit is intended for use in about 2 to 3 feet of water, making it best suited for shallow-water and beach anchoring rather than deep-water mooring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bottom types does the anchor work in?\u003c\/strong\u003e It is designed to twist into compact sand or mud, which is typical of beach and nearshore bottoms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Gen3 Marine 5-4021 kit?\u003c\/strong\u003e The kit includes the screw anchor itself, a storage bag, a line, and a clip, so no additional hardware is needed to start using it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you install or use this beach anchor?\u003c\/strong\u003e Attach one clip to the boat and the other clip to the anchor, then screw the anchor into the sand or mud until it is secure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor kit suitable for personal watercraft?\u003c\/strong\u003e Yes, the Gen3 Marine Beach Screw Anchor Kit is designed to be a good choice for securing a personal watercraft in shallow water near a beach.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the anchor kit weigh?\u003c\/strong\u003e The complete Gen3 Marine 5-4021 anchor kit weighs 1.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the anchor come with a carrying or storage bag?\u003c\/strong\u003e Yes, a storage bag is included with the anchor, line, and clip in this kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this anchor be used for boats other than PWCs?\u003c\/strong\u003e While it is marketed for personal watercraft, the same screw-in design works for any small watercraft that needs to be held in shallow water or near a beach.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor meant for permanent mooring?\u003c\/strong\u003e No, this is a portable beach screw anchor meant for temporary anchoring in shallow water, not a permanent mooring system.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991678791899,"sku":"GEN-5-4021","price":14.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Beach-Anchor-Kit__04384.1722375275.500.750.jpg?v=1785164321"},{"product_id":"gen3-marine-6-lb-beach-spike-anchor-18-in-angled-iron-spike-with-padded-slide-hammer-handle-and-dual-d-rings-mpn-5-4022","title":"Gen3 Marine 6 lb Beach Spike Anchor, 18 Inch Angled Iron Spike, 32 Inch Total Length","description":"\u003cp\u003eThe Gen3 Marine Shore Spike Anchor is a 6 lb beach anchor built for securing small boats, kayaks, canoes, and other watercraft on shore or in shallow water. Instead of digging into sand or mud like a traditional fluke anchor, it uses an 18 inch angled iron spike that is driven directly into soft or hard-packed shorelines. The top of the anchor forms a padded handle that doubles as a built-in slide hammer, so you can drive the spike into the ground by hand without extra tools. Once the spike is set, the anchor holds firm thanks to its angled iron design, which resists being pulled straight back out.\u003c\/p\u003e\u003cp\u003eThe anchor has two D-rings for different jobs: the lower D-ring is used to tie off your vessel's anchor line, while the upper D-ring lets you attach a buoy and line for visibility on the water. At 32 inches in total length, the Shore Spike Anchor is compact enough to store and transport easily, and it comes with a storage bag for keeping it organized between trips. This anchor is suited to anyone beaching or shallow-anchoring a boat, kayak, canoe, or personal watercraft who wants a simple, hammer-in alternative to a conventional anchor and rode.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-4022\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Name:\u003c\/strong\u003e Shore Spike Anchor 6 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Length:\u003c\/strong\u003e 32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpike Length:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\/Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 6 lb Beach Anchor, Storage Bag\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037463507\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Shallow Water Anchors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Gen3 Marine Shore Spike Anchor used for?\u003c\/strong\u003e It is a 6 lb beach anchor (Gen3 Marine part number 5-4022) designed to secure a boat, kayak, canoe, or other watercraft on shore or in shallow water by driving an angled iron spike into the ground rather than burying a fluke.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the spike on this anchor?\u003c\/strong\u003e The spike on the Shore Spike Anchor 6 lb. Is 18 inches long and angled for holding power when driven into soft or hard-packed shorelines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the total length of the anchor?\u003c\/strong\u003e The Gen3 Marine Shore Spike Anchor measures 32 inches in total length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the anchor itself weigh?\u003c\/strong\u003e The anchor is sold as a 6 lb model, part number 5-4022, with a total shipped weight of 7.2 pounds including the included storage bag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you install or set the Shore Spike Anchor?\u003c\/strong\u003e Use the padded handle at the top of the anchor as a built-in slide hammer to drive the 18 inch iron spike straight into the shoreline until it is firmly seated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the two D-rings on the anchor for?\u003c\/strong\u003e The lower D-ring on the 5-4022 Shore Spike Anchor is used to tie off your vessel's anchor line, while the upper D-ring is for attaching a buoy and line for visibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this anchor be used in water as well as on shore?\u003c\/strong\u003e Yes, the Gen3 Marine Shore Spike Anchor is suitable for use both on shore and in shallow water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Shore Spike Anchor made from?\u003c\/strong\u003e The Shore Spike Anchor 6 lb. (part number 5-4022) is made from iron and finished in silver\/black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when you purchase this anchor?\u003c\/strong\u003e Purchasing the Gen3 Marine 5-4022 gets you the 6 lb beach anchor itself and a matching storage bag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor a good fit for kayaks and small boats?\u003c\/strong\u003e The compact 32 inch overall length and 6 lb weight of the Shore Spike Anchor make it a practical size for kayaks, canoes, and other small watercraft that need to beach or shallow-anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is a spike anchor different from a traditional fluke anchor?\u003c\/strong\u003e Rather than relying on flukes digging into a seabed like a traditional anchor, the Gen3 Marine Shore Spike Anchor is hammered directly into the shoreline using its 18 inch angled iron spike and padded slide-hammer handle.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991679250651,"sku":"GEN-5-4022","price":36.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__72346.1754921888.500.750.jpg?v=1785164324"},{"product_id":"gen3-marine-sand-anchor-kit-for-small-boats-and-pwc-portable-fill-and-drop-anchor-bag-with-rope-and-buoy","title":"Gen3 Marine Sand Anchor Kit - Portable Anchor Bag with Rope and Buoy for Small Boats and PWC","description":"\u003cp\u003eThe Gen3 Marine Sand Anchor Kit is a portable anchoring solution for small boats and personal watercraft operating in shallow water. Rather than carrying a heavy, bulky traditional anchor, boaters fill the included bag with sand or rocks gathered from the shoreline, clip it to the vessel, and drop it overboard to hold position. The kit is suitable for both sand and rocky bottoms, making it a versatile option across different shallow-water conditions.\u003c\/p\u003e\u003cp\u003eThe kit includes an anchor bag, anchor line, buoy, and clip. Once filled and clipped to the boat or PWC, the bag settles into the bottom to provide holding power, while the attached line with marker buoy keeps the anchor's location visible for easy retrieval. To bring the anchor back up, simply pull the line, retrieve the bag, and empty the sand or rocks back onto the shore. When not in use, the bag empties and folds down for compact storage on board.\u003c\/p\u003e\u003cp\u003eConstructed from polypropylene in a yellow and black colorway, the Gen3 Marine Sand Anchor Kit is a lightweight, easy-to-stow alternative to conventional anchors for boaters and water sports enthusiasts who spend time in shallow, near-shore waters.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-4031\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Sand Anchor Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Yellow\/black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Anchor Bag, Anchor Line, Buoy, Clip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Small boats and personal watercraft in shallow water\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Gen3 Marine Sand Anchor Kit?\u003c\/strong\u003e The kit (Gen3 Marine part number 5-4031) includes an anchor bag, an anchor line, a marker buoy, and a clip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a sand anchor kit work?\u003c\/strong\u003e You fill the bag with sand or rocks from the shoreline, secure it to your boat or PWC with the included clip, and drop it overboard; the filled bag provides holding power against the bottom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bottom types does the Gen3 Marine Sand Anchor Kit work on?\u003c\/strong\u003e It is suitable for both sand and rocky bottoms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the anchor bag made of?\u003c\/strong\u003e The bag is made of polypropylene.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Gen3 Marine Sand Anchor Kit?\u003c\/strong\u003e It is yellow and black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the anchor kit weigh?\u003c\/strong\u003e The Gen3 Marine Sand Anchor Kit weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor kit suitable for personal watercraft as well as boats?\u003c\/strong\u003e Yes, the kit is designed for anchoring both small boats and personal watercraft in shallow water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the buoy for?\u003c\/strong\u003e The included buoy attaches to the anchor line and marks the anchor's location in the water for easy retrieval.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you retrieve the anchor after use?\u003c\/strong\u003e Pull up the anchor line to bring the bag to the surface, then empty the sand or rocks back onto the shore before stowing the bag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Gen3 Marine Sand Anchor Kit stored when not in use?\u003c\/strong\u003e Once emptied, the anchor bag folds down for compact storage on board.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a sand anchor kit instead of a traditional anchor?\u003c\/strong\u003e A sand anchor kit like the Gen3 Marine 5-4031 is lightweight and compact compared to a traditional anchor, since it only becomes heavy once filled with sand or rocks on site.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991679774939,"sku":"GEN-5-4031","price":14.63,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/AD__56268.1763741626.500.750.jpg?v=1785164325"},{"product_id":"gen3-marine-10-lb-beach-spike-anchor-21-75-in-angled-iron-shore-anchor-with-padded-slide-hammer-handle-and-dual-d-rings","title":"Gen3 Marine 10 lb Shore Spike Anchor with Padded Handle, 21.75 Inch Spike, Dual D-Rings","description":"\u003cp\u003eThe Gen3 Marine Shore Spike Anchor 10 lb. (part number 5-4023) is a spike-style beach anchor built for holding a boat or watercraft steady in shallow water or along the shoreline. Instead of relying on a traditional fluke design that needs to dig into loose sediment, this anchor uses a 21.75 inch angled iron spike that is driven straight down into soft or hard-packed shores for a firm hold. The handle is padded for a comfortable grip and doubles as a slide hammer, so you drive the spike into the ground by sliding the handle down the shaft rather than swinging a separate mallet. At 32.75 inches in total length, the anchor stays compact enough to stow in the included storage bag when not in use.\u003c\/p\u003e\u003cp\u003eTwo D-rings give you flexible rigging options: the lower ring is used to tie off your line to secure the vessel, while the upper ring is available for attaching a buoy and line to mark the anchor's position. The anchor is constructed of iron with a silver and black finish. It suits kayaks, canoes, jon boats, personal watercraft, and other small craft anchored on beaches, sandbars, and shallow shoreline water.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-4023\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Name:\u003c\/strong\u003e Shore Spike Anchor 10 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Spike-style shallow water \/ beach anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpike Length:\u003c\/strong\u003e 21.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Length:\u003c\/strong\u003e 32.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Silver\/black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD-Rings:\u003c\/strong\u003e Dual (lower ring for anchor line, upper ring for buoy line)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 10 lb Beach Anchor, Storage Bag\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037463514\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Gen3 Marine Shore Spike Anchor used for?\u003c\/strong\u003e It is a spike-style beach anchor (part number 5-4023) designed to hold a boat or watercraft in place on shore or in shallow water by driving an iron spike into soft or hard-packed ground.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the spike on this anchor?\u003c\/strong\u003e The angled iron spike measures 21.75 inches, and the anchor's total length including the handle is 32.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Shore Spike Anchor weigh?\u003c\/strong\u003e The Gen3 Marine 5-4023 anchor weighs 9.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the anchor made of?\u003c\/strong\u003e The Shore Spike Anchor is made of iron with a silver\/black finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you drive the spike into the ground?\u003c\/strong\u003e The padded handle functions as a built-in slide hammer, so you slide it down the shaft to drive the 21.75 inch spike into the shore rather than using a separate mallet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the D-rings on the anchor for?\u003c\/strong\u003e The 5-4023 anchor has two D-rings: the lower ring is used to tie off your vessel's anchor line, and the upper ring is used to attach a buoy and line to mark the anchor's location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this anchor be used in water as well as on the beach?\u003c\/strong\u003e Yes, the Gen3 Marine Shore Spike Anchor is suitable for use both on shore and in shallow water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included with the Shore Spike Anchor?\u003c\/strong\u003e The 5-4023 anchor ships with the 10 lb spike anchor itself and a storage bag for transport and stowage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats or watercraft is this anchor suited for?\u003c\/strong\u003e At 9.7 pounds with a 32.75 inch length, the Shore Spike Anchor is sized for kayaks, canoes, jon boats, personal watercraft, and other small craft anchoring in shallow water or along a shoreline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the anchor come with a carrying or storage bag?\u003c\/strong\u003e Yes, a storage bag is included with the Gen3 Marine 10 lb Shore Spike Anchor for easy transport and stowage.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991679840475,"sku":"GEN-5-4023","price":42.77,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__21173.1754920232.500.750.jpg?v=1785164324"},{"product_id":"gen3-marine-3-5-lb-folding-grapnel-anchor-galvanized-four-prong-design-for-kayaks-dinghies-small-boats-mpn-5-5003","title":"Gen3 Marine 3.5 lb Galvanized Folding Grapnel Anchor, Four-Prong Design","description":"\u003cp\u003eThe Gen3 Marine Folding Grapnel Anchor (5-5003) is a 3.5 lb galvanized anchor built with a four-pronged design that folds flat for compact storage aboard small boats, kayaks, dinghies, and personal watercraft. The four prongs are engineered to snag on the bottom, making this anchor well suited for areas with weeds, coral, stone, or gravel where a fluke-style anchor would struggle to set. It is intended for short-term anchoring in low-current conditions rather than situations that call for maximum holding power, so it works well for a lunch stop, a fishing break, or securing a small craft close to shore.\u003c\/p\u003e\u003cp\u003eBecause the prongs fold inward, the anchor collapses down for easy stowage in a small locker, hatch, or storage bag, then unfolds and locks into position for use. Its compact 12 x 3 x 3 inch folded footprint and 3.3 pound weight make it easy to carry, deploy, and retrieve by hand, and its galvanized finish is intended to stand up to regular exposure to water.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-5003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 3.5LB Grapnel Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Grapnel Anchors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Four-pronged, folding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 12 x 3 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037461916\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the Gen3 Marine 5-5003 grapnel anchor?\u003c\/strong\u003e The Gen3 Marine 5-5003 grapnel anchor weighs 3.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many prongs does this anchor have?\u003c\/strong\u003e It has a four-pronged design, which is the classic grapnel configuration for snagging on bottom debris and structure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the 5-5003 grapnel anchor best suited for?\u003c\/strong\u003e This anchor is sized for personal watercraft, kayaks, dinghies, and other smaller vessels rather than large boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this anchor hold in strong current?\u003c\/strong\u003e No. The Gen3 Marine grapnel anchor is designed for short-term use in low-current areas, not for situations requiring extreme holding power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bottom types work best with this grapnel anchor?\u003c\/strong\u003e The four-pronged design of the 5-5003 is intended to snag on weeds, coral, stone, or gravel bottoms, where the prongs can catch on objects along the floor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the anchor fold for storage?\u003c\/strong\u003e Yes, the prongs on the Gen3 Marine 5-5003 fold in for easy, compact storage when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this anchor?\u003c\/strong\u003e The Gen3 Marine grapnel anchor measures 12 x 3 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 5-5003 anchor made from?\u003c\/strong\u003e It has a galvanized finish, intended to help it hold up to regular water exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor rated by weight class, such as a 3.5 lb anchor?\u003c\/strong\u003e Yes, it is a 3.5 lb class grapnel anchor, matching its listed 3.3 pound actual weight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Gen3 Marine 5-5003 grapnel anchor?\u003c\/strong\u003e The UPC for this grapnel anchor is 810037461916.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor good for permanent or long-term mooring?\u003c\/strong\u003e No, the 5-5003 is intended for short-term anchoring rather than long-term or permanent mooring use.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991679971547,"sku":"GEN-5-5003","price":9.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41HZPztmGIL.jpg?v=1784509767"},{"product_id":"gen3-marine-5-5-lb-folding-grapnel-anchor-galvanized-4-prong-for-kayaks-dinghies-and-small-boats","title":"Gen3 Marine 5-5004 Galvanized Folding Grapnel Anchor, 5.3 lb, Four-Prong Design","description":"\u003cp\u003eThe Gen3 Marine 5-5004 is a galvanized folding grapnel anchor built with a four-pronged design that digs into and snags the bottom rather than burying itself like a traditional fluke anchor. This makes it especially effective in areas where the seabed is covered in weeds, coral, stone, or gravel, conditions where a standard anchor can struggle to get a grip. The folding prong design lets the anchor collapse flat for compact storage, so it stows easily in a hatch, dry bag, or small anchor locker without taking up the space of a rigid anchor.\u003c\/p\u003e\u003cp\u003eThis anchor is best suited to short-term anchoring in low-current areas rather than situations calling for maximum holding power, making it a practical choice for smaller vessels including personal watercraft, kayaks, dinghies, and other small boats. At 5.3 pounds and measuring 12 x 3 x 3 inches when folded, it is light enough to carry and deploy by hand while still providing dependable grip for quick stops, fishing breaks, or temporary mooring.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-5004\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Galvanized Folding Grapnel Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Four-pronged, folding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 12 x 3 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Short-term anchoring in low-current areas; weed, coral, stone, or gravel bottoms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Vessels:\u003c\/strong\u003e Personal watercraft, small vessels, kayaks, dinghies\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Gen3 Marine 5-5004 grapnel anchor best used for?\u003c\/strong\u003e The 5-5004 is designed for short-term anchoring in low-current areas, and it performs especially well over weeds, coral, stone, or gravel bottoms where its four prongs can snag and hold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this anchor hold in strong current or rough conditions?\u003c\/strong\u003e No, the four-pronged grapnel design is not intended for situations that call for extreme holding power; it is built for short-term use in low-current areas rather than heavy weather or strong current.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Gen3 Marine grapnel anchor weigh?\u003c\/strong\u003e It weighs 5.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the folded dimensions of this anchor?\u003c\/strong\u003e Folded, the Gen3 Marine 5-5004 measures 12 x 3 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the anchor fold up for storage?\u003c\/strong\u003e Yes, the prongs on the 5-5004 fold inward, allowing the anchor to collapse for compact, easy storage on board.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the anchor made of and what finish does it have?\u003c\/strong\u003e The 5-5004 grapnel anchor has a galvanized finish, which helps protect it against corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many prongs does this grapnel anchor have?\u003c\/strong\u003e It has a four-pronged design, which allows it to catch on objects along the bottom for holding power in weedy, rocky, or coral areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats or watercraft is this anchor suited for?\u003c\/strong\u003e The Gen3 Marine 5-5004 is suited to smaller craft such as personal watercraft, small vessels, kayaks, and dinghies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is a grapnel anchor different from a fluke or claw anchor?\u003c\/strong\u003e Rather than burying itself in sand or mud like a fluke anchor, the four-pronged 5-5004 grapnel anchor is designed to snag on objects and irregular bottom surfaces such as weeds, coral, stone, or gravel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with the Gen3 Marine grapnel anchor?\u003c\/strong\u003e The product is the Gen3 Marine 5-5004 folding grapnel anchor itself, with its four prongs and galvanized finish.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991680004315,"sku":"GEN-5-5004","price":14.77,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41HZPztmGIL_1e97da24-888f-425f-87ca-a7290e46e4ab.jpg?v=1784509771"},{"product_id":"gen3-marine-7-lb-folding-grapnel-anchor-galvanized-steel-four-prong-design-for-kayaks-dinghies-and-small-boats","title":"Gen3 Marine Galvanized Folding Grapnel Anchor, 7 Pounds, 4-Prong","description":"\u003cp\u003eThe Gen3 Marine Galvanized Folding Grapnel Anchor is a 7 pound, four-pronged anchor built for temporary holding in low-current conditions. Its folding prong design lets the anchor collapse flat for compact storage aboard smaller vessels, then open into a four-point grip that catches on rocks, coral, gravel, weeds, and other bottom debris rather than digging in like a fluke-style anchor. This makes it a practical choice for personal watercraft, kayaks, dinghies, and other small boats that need a quick, no-fuss anchoring solution rather than a primary long-term hold.\u003c\/p\u003e\u003cp\u003eBecause the grapnel design relies on snagging rather than burying, it is best suited to short-term stops such as a lunch break, a fishing spot, or a swim stop in sheltered water, and it is not intended for extreme holding conditions or strong current. The galvanized steel construction resists corrosion in the marine environment. Overall item dimensions are 12 x 3 x 3 inches, and the anchor weighs 7 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-5005\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Grapnel Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProng Count:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Folding prongs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 12 x 3 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Short-term anchoring in low-current areas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Vessels:\u003c\/strong\u003e Personal watercraft, kayaks, dinghies, smaller boats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Gen3 Marine 5-5005 grapnel anchor made for?\u003c\/strong\u003e The 5-5005 grapnel anchor is designed for personal watercraft, kayaks, dinghies, and other smaller vessels rather than large boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this anchor weigh?\u003c\/strong\u003e It weighs 7 pounds, matching the 7 lb rating in its name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this anchor hold in strong current?\u003c\/strong\u003e No, the 5-5005 is best for short-term use in areas with low current and is not designed for extreme holding conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bottom types does the grapnel anchor work best on?\u003c\/strong\u003e It works best on weeds, coral, stone, or gravel bottoms where its four prongs can snag on debris and structure rather than bury into sand or mud.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the anchor fold for storage?\u003c\/strong\u003e Yes, the prongs on the Gen3 Marine 5-5005 fold flat, making it compact to store on smaller vessels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the anchor made from?\u003c\/strong\u003e It is made from galvanized steel, which resists corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 5-5005 anchor?\u003c\/strong\u003e The item measures 12 x 3 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many prongs does this anchor have?\u003c\/strong\u003e The Gen3 Marine grapnel anchor has a four-pronged design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor meant for long-term mooring?\u003c\/strong\u003e No, it is intended for short-term anchoring rather than long-term mooring or extreme holding situations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 5-5005 anchor?\u003c\/strong\u003e The product is the 7 pound galvanized folding grapnel anchor itself, with prongs that fold for storage.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991680397531,"sku":"GEN-5-5005","price":20.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41HZPztmGIL_7c4c0b43-962a-4d70-ad7b-74be251502fc.jpg?v=1784509787"},{"product_id":"gen3-marine-10-lb-vinyl-coated-cast-iron-mushroom-anchor-for-small-boats-canoes-kayaks-and-jon-boats","title":"Gen3 Marine Mushroom Anchor 5-6003, Vinyl Coated Cast Iron, Compact Lake and River Anchor","description":"\u003cp\u003eThe Gen3 Marine Mushroom Anchor (5-6003) is a compact cast iron anchor built for boaters who need dependable holding power in soft bottom conditions like mud or sand. Its mushroom-shaped design settles into soft sediment and creates a suction-style hold that keeps small to mid-size watercraft securely in place, making it a practical choice for lake and river anchoring.\u003c\/p\u003e\u003cp\u003eThe anchor body is cast from iron and finished with a heavy-duty vinyl coating that wraps the entire surface. This coating serves two purposes: it protects the anchor itself from rust and corrosion after repeated exposure to water, and it protects your boat's hull, deck, and finish from scratches and dings during handling and stowage. The finish is black, so it blends in with most deck hardware and anchor lockers.\u003c\/p\u003e\u003cp\u003eCompact and self-contained in shape, this mushroom anchor is easy to stow when it is not deployed, and its straightforward design means there is nothing to assemble or adjust before use. It is suited to various watercraft where a soft-bottom anchoring solution is needed rather than a fluke or plow anchor for rockier or harder bottoms.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-6003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Mushroom Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast iron with vinyl coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 10 x 10 x 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Lake and River Anchors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037463606\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat bottom types does the Gen3 Marine Mushroom Anchor 5-6003 work best in?\u003c\/strong\u003e It performs best in soft bottoms like mud or sand, where its mushroom shape settles in and creates strong holding power. It is not designed as a hard-bottom or rocky-bottom anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 5-6003 anchor made of?\u003c\/strong\u003e The Gen3 Marine Mushroom Anchor 5-6003 is made of cast iron with a heavy-duty vinyl coating applied over the entire body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the anchor vinyl coated instead of bare cast iron?\u003c\/strong\u003e The vinyl coating on the 5-6003 protects the cast iron from corrosion during repeated water exposure and also protects your boat's finish from scratches when the anchor is stowed or handled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Gen3 Marine Mushroom Anchor 5-6003 weigh?\u003c\/strong\u003e It weighs 9.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the 5-6003 anchor?\u003c\/strong\u003e The packaged Gen3 Marine Mushroom Anchor 5-6003 measures 10 x 10 x 10 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Gen3 Marine Mushroom Anchor?\u003c\/strong\u003e It has a black finish from the vinyl coating over the cast iron body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor easy to store on a boat?\u003c\/strong\u003e Yes, the 5-6003's compact mushroom design makes it easy to stow in an anchor locker or storage compartment when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat types of boats is the 5-6003 mushroom anchor suited for?\u003c\/strong\u003e Its compact size and soft-bottom holding design make it suitable for various small to mid-size watercraft used on lakes and rivers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Gen3 Marine Mushroom Anchor require assembly?\u003c\/strong\u003e No, the 5-6003 is a one-piece cast iron anchor with no assembly required before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the anchor damage my boat's deck or hull?\u003c\/strong\u003e The heavy-duty vinyl coating on the 5-6003 is designed to guard against scratching your boat's finish during handling and storage, unlike a bare cast iron anchor.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991680987355,"sku":"GEN-5-6003","price":16.52,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Gen-3-Marine-5-6003-Vinyl-Coated-Mushroom-Anchor__35848.1722490336.500.750.jpg?v=1785164328"},{"product_id":"gen3-marine-20-lb-rubber-coated-river-anchor-tri-fluke-design-holds-boats-up-to-24-ft","title":"Gen3 Marine 20 lb Rubber Coated Tri-Fluke River Anchor for Boats up to 24 ft","description":"\u003cp\u003eThe Gen3 Marine Rubber Coated River Anchor is a 20 lb tri-fluke anchor built for boaters who need dependable holding power in rivers, currents, tidal waters, and inland lakes. The tri-fluke design lets the flukes dig in and grip effectively across sand, mud, and weedy bottom conditions, giving it more versatility than a single-fluke anchor in mixed bottom types. It is rated to hold boats up to 24 feet in length, making it a solid choice for small to mid-size recreational boats as well as kayaks, jet skis, and canoes.\u003c\/p\u003e\u003cp\u003eConstruction is iron wrapped in a rubber (vinyl) coating, which resists corrosion in marine environments while also protecting your hull and deck from scuffs and scratches during retrieval and stowage. The anchor is finished in black. It ships as a single anchor, ready to be paired with your own anchor line or rode.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-6013\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Tri-fluke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolding Capacity:\u003c\/strong\u003e Boats up to 24 feet in length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Iron wrapped in rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Rubber (vinyl) coating, corrosion resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037463613\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Lake \u0026amp; River Anchors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats will this anchor hold?\u003c\/strong\u003e The Gen3 Marine 20 lb River Anchor is designed to hold boats up to 24 feet in length, including in currents, tidal waters, and inland waters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the tri-fluke design good for?\u003c\/strong\u003e The tri-fluke design gives this anchor three flukes that dig in and grip across sand, mud, and weedy bottom conditions, so it works reliably in mixed bottom types rather than just one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the anchor made of?\u003c\/strong\u003e It is constructed from iron wrapped in a rubber coating, combining the weight needed for holding power with a protective outer layer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this anchor scratch my boat's hull or deck?\u003c\/strong\u003e No. The rubber (vinyl) coating on the Gen3 Marine River Anchor is designed to protect your hull and deck surfaces during retrieval and stowage, unlike a bare metal anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor corrosion resistant?\u003c\/strong\u003e Yes, the rubber coating provides corrosion resistance suited to marine environments, helping the anchor hold up over repeated use in salt and fresh water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this anchor weigh?\u003c\/strong\u003e This Gen3 Marine river anchor weighs 20 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat watercraft is this anchor suitable for?\u003c\/strong\u003e Beyond small to mid-size boats up to 24 feet, this anchor is suitable for kayaks, jet skis, and canoes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Gen3 Marine River Anchor?\u003c\/strong\u003e It is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the anchor come with rope or a chain?\u003c\/strong\u003e No, part number 5-6013 includes the anchor only; rope or chain is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor better suited for rivers or lakes?\u003c\/strong\u003e It is designed for both. The tri-fluke design gives it a strong hold in river currents as well as inland lakes and tidal waters.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991681020123,"sku":"GEN-5-6013","price":34.26,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31EgE1NRbuL.jpg?v=1784509807"},{"product_id":"gen3-marine-folding-grapnel-anchor-kit-1-5-lb-red-powder-coated-4-prong-anchor-with-buoy-line-and-storage-bag-mpn-5-5010","title":"Gen3 Marine 2 lb Folding Grapnel Anchor Kit with Storage Bag and Buoy","description":"\u003cp\u003eThe Gen3 Marine Folding Grapnel Anchor Kit is a red powder-coated, four-pronged folding anchor built for small watercraft that need reliable holding power on snag-friendly bottoms. Its folding grapnel design is intended for areas where the anchor can hook onto objects on the bottom rather than dig in, making it well suited to bottoms with weeds, coral, stone, or gravel. The four-prong folding profile lets the anchor collapse flat for compact storage, then open to grip when it hits the bottom.\u003c\/p\u003e\u003cp\u003eThis kit is intended for personal watercraft, smaller boats, kayaks, and dinghies. It comes complete as a kit: the folding grapnel anchor, an anchor line, a clip and adjustable buoy, and a storage bag that keeps the anchor from scratching or marking the boat while stowed. The red powder coat finish is applied for corrosion resistance and visibility. This is a compact, self-contained ground tackle kit for boaters who want an anchor that stores small but still gives them a snag-style hold in the right bottom conditions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-5010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Folding Grapnel Anchor Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Grapnel Anchors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Weight:\u003c\/strong\u003e 1.5 lb (0.7 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 12 x 5 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Red powder coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Four-prong folding grapnel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Anchor, anchor line, clip and adjustable buoy, storage bag\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037461947\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Gen3 Marine Folding Grapnel Anchor Kit?\u003c\/strong\u003e The kit (Gen3 Marine part number 5-5010) includes the folding grapnel anchor, an anchor line, a clip and adjustable buoy, and a storage bag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is this grapnel anchor kit designed for?\u003c\/strong\u003e It is designed for personal watercraft, smaller boats, kayaks, and dinghies rather than larger vessels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the anchor itself weigh?\u003c\/strong\u003e The folding grapnel anchor in kit 5-5010 weighs 1.5 lb (0.7 kg); the complete kit weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the anchor kit?\u003c\/strong\u003e The Gen3 Marine Folding Grapnel Anchor Kit measures 12 x 5 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bottom types is a folding grapnel anchor best suited for?\u003c\/strong\u003e Grapnel-style anchors like the Gen3 Marine 5-5010 work best on bottoms with weeds, coral, stone, or gravel, where the prongs can snag onto objects rather than dig into sand or mud.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit come with a storage bag?\u003c\/strong\u003e Yes, a storage bag is included with the 5-5010 kit to protect the boat's interior while the anchor is stowed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a buoy included with this anchor kit?\u003c\/strong\u003e Yes, a clip and adjustable buoy come with the Gen3 Marine Folding Grapnel Anchor Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does this anchor have?\u003c\/strong\u003e The 5-5010 anchor has a red powder coat finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the anchor fold for storage?\u003c\/strong\u003e Yes, it is a four-prong folding grapnel design that collapses for compact storage in its included bag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs an anchor line included, or does it need to be purchased separately?\u003c\/strong\u003e An anchor line is included as part of the Gen3 Marine 5-5010 kit.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991681413339,"sku":"GEN-5-5010","price":18.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/FDFG__04580.1763741626.500.750.jpg?v=1785164328"},{"product_id":"tie-down-mate-screw-in-sand-anchor-for-pwc-kayak-jet-ski-pontoon-and-small-boats-15-ft-line-float-and-carry-bag","title":"Tie Down Mate Screw-In Sand Anchor with 15 ft. Line, Water Float and Carrying Bag - Part 86071","description":"\u003cp\u003eThe Tie Down Mate is a screw-in sand anchor built to hold kayaks, jet skis, canoes, pontoons, and other small watercraft securely on sandy shorelines and shallow water. Instead of relying on a heavy, drop-style anchor, the Tie Down Mate threads directly into the sand, giving it a solid grip that resists pull-out even as tide and wave action shift around it. A removable handle stores inside the anchor tube when not in use, keeping the whole unit compact and easy to stow on board or in a beach bag.\u003c\/p\u003e\u003cp\u003eThe anchor is made from zinc for durable, corrosion-resistant performance in saltwater and freshwater environments alike. Each Tie Down Mate kit includes the anchor with its removable handle, a 15 ft. Line for securing to your vessel, a water float to keep the line visible and untangled on the surface, and a carrying bag for transport and storage. It is a straightforward, no-fuss way to keep a small boat or personal watercraft from drifting off while you are on the beach or in shallow anchorages.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86071\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Sand Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 500 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 18 inches L x 6 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Length:\u003c\/strong\u003e 15 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Removable handle, 15 ft. Line, water float, carrying bag\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628860719\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Warranty:\u003c\/strong\u003e 1 year limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tie Down Mate (part 86071) designed for?\u003c\/strong\u003e It is a screw-in sand anchor designed to secure kayaks, jet skis, canoes, pontoons, and other small watercraft on sandy shorelines and in shallow water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Tie Down Mate anchor into the sand?\u003c\/strong\u003e The anchor screws directly into and out of the sand using its removable handle, making setup and removal quick without digging or hammering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included with the Tie Down Mate kit?\u003c\/strong\u003e The Tie Down Mate (part 86071) includes the anchor with a removable handle, a 15 ft. Line, a water float, and a carrying bag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the anchor made of?\u003c\/strong\u003e The Tie Down Mate is made of zinc, giving it corrosion resistance for use in both saltwater and freshwater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can the Tie Down Mate hold?\u003c\/strong\u003e The Tie Down Mate has a load capacity of 500 pounds, suitable for holding small boats and personal watercraft in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Tie Down Mate anchor?\u003c\/strong\u003e The anchor measures 18 inches in length by 6 inches in width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the line included with the Tie Down Mate?\u003c\/strong\u003e A 15 ft. Line is included with the Tie Down Mate (part 86071) for securing the anchor to your watercraft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the water float used for?\u003c\/strong\u003e The included water float keeps the anchor line visible and floating on the surface so it does not tangle or sink out of sight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I store the handle when I am not using the anchor?\u003c\/strong\u003e The Tie Down Mate's handle is removable and stores inside the anchor tube, keeping the unit compact for transport and storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Tie Down Mate suitable for saltwater use?\u003c\/strong\u003e Yes, the zinc construction of the Tie Down Mate (part 86071) is corrosion resistant and suitable for both saltwater and freshwater conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat watercraft is the Tie Down Mate compatible with?\u003c\/strong\u003e The Tie Down Mate works with kayaks, jet skis, canoes, pontoons, and other small boats and personal watercraft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Tie Down Mate come with a warranty?\u003c\/strong\u003e Yes, the Tie Down Mate (part 86071) is backed by a 1 year limited manufacturer warranty.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991687606491,"sku":"T-D-86071","price":31.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__16664.1763741593.500.750.jpg?v=1785188444"},{"product_id":"danforth-hi-tensile-anchor-94019-5h-size-1-000-lbs-holding-power-for-boats-under-31-ft","title":"Danforth Hi-Tensile Anchor 94019, 5H Size, 1,000 lbs Holding Power for Boats Under 31 ft","description":"\u003cp\u003eThe Danforth Hi-Tensile Anchor, part number 94019, is a fluke-style anchor built for boats under 31 feet. It is sized as a 5H unit and delivers 1,000 lbs. Of holding power, giving small to mid-size boat owners a dependable option for overnight anchoring, lunch stops, or fishing on the hook. The shank is made from high-grade 4130 steel and is hot-dip galvanized for corrosion resistance in fresh and salt water. The beveled fluke design is engineered for quick, deep penetration into the seabed, helping the anchor set fast and hold securely even in soft or loose bottoms.\u003c\/p\u003e\u003cp\u003eThis anchor folds flat for compact storage in an anchor locker or on a bow roller, and its lightweight build keeps it easy to deploy and retrieve by hand. It is sold as a single anchor (rode, shackle, and other ground tackle are not included). The Danforth Hi-Tensile Anchor 94019 is intended for boats under 31 feet in length and carries a 1 year limited warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Danforth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 94019\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolding Power:\u003c\/strong\u003e 1,000 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e Under 31 ft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 21-1\/2 in x 16-1\/2 in x 11-3\/4 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 4130 steel shank, hot-dip galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Galvanized silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Slip-Ring Anchors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628940190\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBoats under 31 feet in length\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Danforth 94019 anchor rated for?\u003c\/strong\u003e The Danforth Hi-Tensile Anchor 94019 is recommended for boats under 31 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much holding power does this anchor provide?\u003c\/strong\u003e The 94019 provides 1,000 lbs. Of holding power, which is why it is classified as a 5H size Danforth anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Danforth 94019 anchor weigh?\u003c\/strong\u003e This anchor has a shipping weight of 6.4 pounds, making it easy for one person to handle and store.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the anchor shank made of?\u003c\/strong\u003e The Danforth Hi-Tensile Anchor 94019 uses a shank made from high-grade 4130 steel with a hot-dip galvanized finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the folded dimensions of the 94019 anchor?\u003c\/strong\u003e The 94019 measures 21-1\/2 in x 16-1\/2 in x 11-3\/4 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 94019 anchor include rode or a shackle?\u003c\/strong\u003e No, the Danforth Hi-Tensile Anchor 94019 is sold as the anchor only; rode, chain, and shackle are purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Danforth 94019 anchor suitable for saltwater use?\u003c\/strong\u003e Yes, the hot-dip galvanized 4130 steel construction on the 94019 is designed to resist corrosion in both fresh and saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 5H size designation mean on this anchor?\u003c\/strong\u003e 5H refers to the Danforth Hi-Tensile size class of the 94019 anchor, which corresponds to its 1,000 lbs. Holding power rating for boats under 31 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the fluke design matter on the 94019 anchor?\u003c\/strong\u003e The beveled fluke design on the Danforth 94019 allows for quick, deep penetration into the seabed, giving it a reliable hold even in soft or loose bottoms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Danforth 94019 anchor genuine Tie Down Engineering equipment?\u003c\/strong\u003e Yes, the 94019 is a genuine Danforth Hi-Tensile Anchor manufactured by Tie Down Engineering, not a generic substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the 94019 anchor?\u003c\/strong\u003e The Danforth Hi-Tensile Anchor 94019 carries a 1 year limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 94019 anchor be folded for storage?\u003c\/strong\u003e Yes, the fluke design on the 94019 folds flat against the shank for compact storage in an anchor locker or on a bow roller.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017659719899,"sku":"T-D-94019","price":240.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__57224.1763741653.500.750.jpg?v=1785329078"},{"product_id":"tie-down-engineering-hooker-quik-set-7hq-boat-anchor-95011-150-lb-holding-power-fits-15-19-ft-boats","title":"Tie Down Engineering Hooker Quik-Set 7HQ Boat Anchor 95011, 150 lb Holding Power, Fits 15-19 ft Boats","description":"\u003cp\u003eThe Tie Down Engineering Hooker Quik-Set 7HQ anchor (part number 95011) is a fluke-style boat anchor built for boats in the 15 to 19 foot range. It uses a slip-ring design on the shank that lets the anchor rotate to break free easily during retrieval, while still digging in firmly on the way down thanks to its strengthened fluke breaks. The single-crown construction concentrates holding force into the flukes, giving this anchor a rated holding power of 150 lbs in typical bottom conditions.\u003c\/p\u003e\u003cp\u003eBuilt from galvanized steel and finished with a hot-dip galvanized coating, the 7HQ anchor resists corrosion from repeated exposure to fresh and salt water, making it suitable for long-term use on lakes, rivers, and coastal waters. At 4.5 pounds, it is light enough to deploy and retrieve by hand, and its folding fluke design keeps it compact for storage in an anchor locker or bow compartment. Overall dimensions are 13.5 inches by 11-1\/2 inches by 9 inches. This anchor is a good fit for pontoon boats, bass boats, and other small to mid-size recreational boats that need a dependable primary or secondary anchor.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 95011\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 7HQ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolding Power:\u003c\/strong\u003e 150 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 15-19 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 13.5 inches x 11-1\/2 inches x 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hot-Dip Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Type:\u003c\/strong\u003e Fluke, Slip-Ring Quick-Set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628950113\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Tie Down Engineering 95011 anchor designed for?\u003c\/strong\u003e The 7HQ anchor, part number 95011, is designed for boats between 15 and 19 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much holding power does this anchor provide?\u003c\/strong\u003e The 95011 Hooker Quik-Set anchor has a rated holding power of 150 lbs, provided by its single-crown fluke construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 95011 anchor weigh?\u003c\/strong\u003e This anchor weighs 4.5 pounds, making it easy to handle and stow on boats in the 15-19 foot range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Hooker Quik-Set 7HQ anchor?\u003c\/strong\u003e The 7HQ anchor measures 13.5 inches by 11-1\/2 inches by 9 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 95011 anchor made of galvanized steel?\u003c\/strong\u003e Yes, the Tie Down Engineering 7HQ anchor is constructed from galvanized steel with a hot-dip galvanized finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the slip-ring design on this anchor do?\u003c\/strong\u003e The slip-ring on the 7HQ anchor's shank allows the anchor to rotate and break free easily during retrieval, while its strengthened fluke breaks still provide firm penetration when setting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a larger version of this anchor available?\u003c\/strong\u003e Yes, Tie Down Engineering also offers the 10HQ model (part number 95016) for boats 19 to 24 feet, rated at 160 lbs holding power and weighing 5 pounds; it is a separate part number from the 95011 7HQ anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does the 95011 anchor come in?\u003c\/strong\u003e The Hooker Quik-Set 7HQ anchor has a silver, hot-dip galvanized finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 95011 anchor be used in saltwater?\u003c\/strong\u003e The hot-dip galvanized steel construction of the 7HQ anchor resists corrosion, making it suitable for both freshwater and saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a folding anchor?\u003c\/strong\u003e The Hooker Quik-Set 7HQ (part 95011) uses a fluke anchor design that folds flat for compact storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of anchor is the 95011?\u003c\/strong\u003e The 95011 is a fluke-style anchor, also known as a Danforth-type design, using a single-crown construction for its holding power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Tie Down Engineering 95011 anchor?\u003c\/strong\u003e The 95011 listing includes one Hooker Quik-Set 7HQ anchor.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017659850971,"sku":"T-D-95011","price":21.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41iQvsZrASL.jpg?v=1785331004"},{"product_id":"tie-down-engineering-10hq-quick-set-anchor-95016-for-boats-19-24-feet","title":"Tie Down Engineering 10HQ Quick-Set Anchor 95016 for Boats 19-24 Feet","description":"\u003cp\u003eThe Tie Down Engineering 95016 is a 10HQ class quick-set boat anchor built for boats in the 19 to 24 foot range. It uses a Slip-Lok shank that insures a proper set of the anchor on the bottom, so it digs in and holds rather than skating across the seabed. A slip ring design makes retrieval easy once you are ready to move on, letting the anchor break free without excessive strain on ground tackle or crew. The anchor carries a hot-dip galvanized finish, which coats the steel to resist rust and corrosion from ongoing exposure to fresh or salt water.\u003c\/p\u003e\u003cp\u003eRated with a holding power of 160 pounds, the 95016 is sized to match the ground tackle needs of mid-size runabouts, bowriders, and similar boats in its recommended length range. It measures 13.5 inches by 14-1\/2 inches by 9-1\/2 inches and weighs 5 pounds, making it manageable to stow, deploy, and haul back aboard by hand. This is a straightforward, no-frills anchor for boaters who want a dependable primary or secondary anchor sized correctly to their boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 95016\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Class:\u003c\/strong\u003e 10HQ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 13.5 inches x 14-1\/2 inches x 9-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 16.75 x 14.77 x 3.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolding Power:\u003c\/strong\u003e 160 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 19-24 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\/Finish:\u003c\/strong\u003e Hot-dip galvanized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e 1 boating anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628950168\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boat length is the Tie Down Engineering 95016 anchor made for?\u003c\/strong\u003e The 95016 is recommended for boats in the 19 to 24 foot range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 95016 anchor weigh?\u003c\/strong\u003e It weighs 5 pounds, making it manageable to deploy and retrieve by hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the holding power of this anchor?\u003c\/strong\u003e The 95016 carries a holding power rating of 160 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 95016 anchor have?\u003c\/strong\u003e It has a hot-dip galvanized finish, which resists rust and corrosion in freshwater and saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 95016 anchor?\u003c\/strong\u003e The Tie Down Engineering 95016 measures 13.5 inches by 14-1\/2 inches by 9-1\/2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 10HQ class designation mean for this anchor?\u003c\/strong\u003e 10HQ is the anchor class rating Tie Down Engineering assigns to the 95016, corresponding to its 5-pound weight and 160-pound holding power for boats 19-24 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Slip-Lok shank help the anchor set?\u003c\/strong\u003e The Slip-Lok shank on the 95016 insures the anchor sets properly on the bottom so it digs in and holds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 95016 anchor easy to retrieve?\u003c\/strong\u003e Yes, it uses a slip ring design that makes retrieval easy once the anchor is ready to be brought back aboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when you order the 95016?\u003c\/strong\u003e The 95016 ships as one complete boating anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 95016 different from the Tie Down Engineering 95021 anchor?\u003c\/strong\u003e The 95016 is the 10HQ class anchor for boats 19-24 feet, weighing 5 pounds with 160 pounds of holding power, while the 95021 is a larger 13HQ class anchor for boats 24-28 feet, weighing 6.5 pounds with 180 pounds of holding power. These are separate part numbers, so order the one matching your boat length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the 95016 anchor?\u003c\/strong\u003e The Tie Down Engineering 95016 anchor has UPC 081628950168.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 95016 anchor made from?\u003c\/strong\u003e It is steel construction finished with a hot-dip galvanized coating for corrosion resistance.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017659949275,"sku":"T-D-95016","price":27.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61Z8I688LXL.jpg?v=1785331018"},{"product_id":"tie-down-engineering-95021-13hq-quick-set-anchor-6-5-lb-galvanized-steel-fluke-anchor","title":"Tie Down Engineering 95021 13HQ Quick Set Anchor, 6.5 lb Galvanized Steel Fluke Anchor","description":"\u003cp\u003eThe Tie Down Engineering 95021 is a 6.5 lb quick-set fluke anchor built for lake and river boats. Designated model 13HQ, it is recommended for boats up to 180 lbs and pairs with 24-28 ft of anchor rode for proper scope and holding power. The anchor uses a slip-lok shank that insures proper set of the anchor, along with a slip ring design that allows for easy retrieval once you are ready to move on. Wide, fully welded flukes are engineered at angles designed to penetrate the bottom quickly and hold firmly, while the fully welded crown configuration adds strength at the anchor's most stressed point.\u003c\/p\u003e\u003cp\u003eConstructed of galvanized steel and hot-dip galvanized after fabrication, the 95021 resists corrosion in fresh and lake\/river conditions over repeated use. It is sized for smaller boats such as canoes, kayaks, jon boats, and other lightweight craft where a compact, easy-to-stow anchor is needed. At 21 in. X 18-1\/4 in. X 11-3\/4 in. And 6.5 lbs, it folds down for compact storage while still delivering the holding power expected from a quick-set style anchor.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 95021\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Designation:\u003c\/strong\u003e 13HQ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Weight:\u003c\/strong\u003e 6.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Weight:\u003c\/strong\u003e Up to 180 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Rode Length:\u003c\/strong\u003e 24-28 ft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 21 in. X 18-1\/4 in. X 11-3\/4 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hot-dip galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628950212\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Lake \u0026amp; River Anchors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Tie Down Engineering 95021 anchor made for?\u003c\/strong\u003e The 95021, model 13HQ, is recommended for boats up to 180 lbs, making it suited to canoes, kayaks, jon boats, and other small lightweight craft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 95021 anchor weigh?\u003c\/strong\u003e The Tie Down Engineering 95021 anchor weighs 6.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length of anchor rode should I use with this anchor?\u003c\/strong\u003e Tie Down Engineering recommends 24-28 ft. Of rode for the 95021 (model 13HQ) anchor to achieve proper scope and holding power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 95021 anchor?\u003c\/strong\u003e The 95021 measures 21 in. X 18-1\/4 in. X 11-3\/4 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 95021 anchor made of?\u003c\/strong\u003e It is made of galvanized steel and is hot-dip galvanized after fabrication for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 95021 anchor come in different sizes?\u003c\/strong\u003e Yes, Tie Down Engineering offers a larger companion anchor, model 15HQ, at 8 lbs and rated for boats up to 200 lbs with 28-30 ft. Of rode; the 95021 (13HQ) is the 6.5 lb size rated to 180 lbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the shank on the 95021 work?\u003c\/strong\u003e The 95021 uses a slip-lok shank that insures proper set of the anchor when it digs in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 95021 anchor easy to retrieve?\u003c\/strong\u003e Yes, it uses a slip ring design that makes retrieval easier once you are ready to pull anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 95021 anchor?\u003c\/strong\u003e The 95021 has a silver, galvanized finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the model number stamped on the 95021 anchor?\u003c\/strong\u003e The anchor is identified as model 13HQ, corresponding to Tie Down Engineering part number 95021.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 95021 a fluke-style anchor?\u003c\/strong\u003e Yes, it is a quick-set fluke anchor with wide flukes and a fully welded crown configuration engineered for quick penetration and secure holding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Tie Down Engineering 95021 anchor?\u003c\/strong\u003e The UPC for the 95021 anchor is 081628950212.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017659982043,"sku":"T-D-95021","price":71.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/618TY5OocYL_4f9a42df-37b5-4a83-a677-a0ec66e0e46d.jpg?v=1785331026"},{"product_id":"lewmar-vector-manual-shallow-water-anchor-8-ft-depth-pull-rope-deployment-black","title":"Lewmar Vector Manual Shallow Water Anchor, 8 ft. Depth, Pull-Rope Deployment, Black","description":"\u003cp\u003eThe Lewmar Vector Manual Shallow Water Anchor is a pull-rope-operated shallow water anchor built to hold position in water up to 8 ft. Deep. Unlike powered shallow water anchors, the Vector Manual requires no hoses, pumps, or electric wiring, which keeps installation simple and eliminates the maintenance and potential failure points that come with an electrical system. Deployment and retrieval are both handled manually: release the elastic securing strap and loosen the tensioning\/retrieval strap to lower the anchor to the bottom, then reach down and pull the retrieval strap to raise and lock the anchor back in place.\u003c\/p\u003e\u003cp\u003eA fiberglass spike penetrates the bottom to hold the boat steady, and it is supported by a gas spring that keeps the spike secured and stable even through wake turbulence from passing boats. The housing is finished in powder-coated aluminum for corrosion resistance, allowing the anchor to stand up to ongoing exposure to the elements. The Vector Manual mounts using a universal hole pattern and is compatible with aftermarket mounts, and an optional quick-release mounting bracket is available separately for owners who want to move the anchor between boats or remove it for transport and storage.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lewmar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2024008743\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Shallow Water Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual, pull-rope deployment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Depth Capacity:\u003c\/strong\u003e 8 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecuring Mechanism:\u003c\/strong\u003e Gas spring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpike Material:\u003c\/strong\u003e Fiberglass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Finish:\u003c\/strong\u003e Powder-coated aluminum, corrosion-resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Universal hole pattern, compatible with aftermarket mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 66.75 x 14 x 7.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 26.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011854377\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow deep of water does the Lewmar Vector Manual Shallow Water Anchor work in?\u003c\/strong\u003e The Lewmar Vector Manual (part number 2024008743) is designed for shallow water anchoring in depths up to 8 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Vector Manual shallow water anchor require any electrical wiring or hoses?\u003c\/strong\u003e No. The Vector Manual version of the Lewmar Vector shallow water anchor operates entirely by hand using a pull-rope and strap system, so there are no hoses, pumps, or electric wiring to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you deploy and retrieve the Lewmar Vector Manual anchor?\u003c\/strong\u003e To deploy, release the elastic securing strap and loosen the tensioning\/retrieval strap to let the anchor descend to the bottom. To retrieve, reach down, pull the retrieval strap, and it locks the anchor back in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the Lewmar Vector 2024008743 come in?\u003c\/strong\u003e This Lewmar Vector Manual Shallow Water Anchor is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the anchor spike made from?\u003c\/strong\u003e The Vector Manual uses a fiberglass spike that penetrates the bottom to hold the boat's position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps the anchor spike secured while anchored?\u003c\/strong\u003e A gas spring secures the fiberglass spike, providing steadfast stability even through wake turbulence from passing boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the Lewmar Vector Manual anchor?\u003c\/strong\u003e The unit measures 66.75 x 14 x 7.25 inches and weighs 26.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the housing corrosion-resistant?\u003c\/strong\u003e Yes. The Lewmar Vector Manual anchor has a powder-coated aluminum finish that resists corrosion and is built to withstand ongoing exposure to the elements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does installation work for the Vector Manual anchor?\u003c\/strong\u003e Installation does not require electric wiring since it is a manual system, and the anchor is compatible with aftermarket mounts using a universal hole pattern for a straightforward setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Lewmar Vector Manual anchor be moved between boats?\u003c\/strong\u003e An optional quick-release mounting bracket is available for the Vector Manual anchor, allowing it to be attached, detached, and moved between boats or removed for transport and storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 2024008743 Vector Manual anchor?\u003c\/strong\u003e The Lewmar Vector Manual Shallow Water Anchor (2024008743) includes the anchor unit with its gas-spring-secured fiberglass spike, pull-rope and strap deployment system, and powder-coated aluminum housing.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":49025131839707,"sku":"LEW-2024008743","price":559.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61dKPLdl_ML.jpg?v=1785331069"},{"product_id":"lewmar-stainless-steel-dtx-anchor-14-lb-plow-style-boat-anchor","title":"Lewmar Stainless Steel DTX Anchor, 14 lb Plow-Style Boat Anchor","description":"\u003cp\u003eThe Lewmar DTX Anchor is a 14 lb stainless steel plow-style anchor built for boaters who need fast-setting, reliable holding power across a range of seabed conditions. Its one-piece construction uses high-grade manganese steel for durability in harsh marine environments, while the narrow shank is designed for deep penetration into the bottom. A lead ballast within the anchor's tip helps it quickly find the optimal center of gravity as it settles, so it digs in and holds rather than skipping or dragging.\u003c\/p\u003e\u003cp\u003eThis anchor is self-launching, meaning it deploys cleanly off a bow roller without needing to be manually positioned, and its low profile allows it to set immediately once dropped. It is versatile across bottom types including grass, rock, sand, and weeds, making it a practical primary or backup anchor for a variety of boating conditions. The stainless steel finish resists corrosion in saltwater and freshwater use alike. Lewmar anchors are Lloyd's-certified, reflecting a one-piece design engineered for the highest holding power per pound of anchor weight.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lewmar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0057206\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e DTX Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.42 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Class:\u003c\/strong\u003e 14 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 10 x 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Type:\u003c\/strong\u003e Plow-style, self-launching\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Anchor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lewmar DTX Anchor 0057206 weigh?\u003c\/strong\u003e The Lewmar DTX Anchor, part number 0057206, weighs 13.42 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the DTX anchor made of?\u003c\/strong\u003e It is made of stainless steel, using a high-grade manganese steel construction for durability in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the DTX anchor self-launching?\u003c\/strong\u003e Yes, the Lewmar DTX Anchor 0057206 is self-launching and sets easily from a bow roller without needing to be manually positioned.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bottom types does this anchor work well in?\u003c\/strong\u003e The DTX Anchor is designed to set and hold in grass, rock, sand, and weeds, making it versatile across common seabed conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Lewmar DTX Anchor?\u003c\/strong\u003e The item dimensions of the 0057206 DTX Anchor are 10 x 10 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this anchor set so quickly?\u003c\/strong\u003e A low profile design allows the DTX Anchor to set immediately when dropped, and lead ballast in the tip helps it quickly find the optimal center of gravity for digging into the seabed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the DTX Anchor certified for holding power?\u003c\/strong\u003e Yes, Lewmar anchors including the 0057206 DTX Anchor are Lloyd's-certified, reflecting a one-piece design with high holding power per pound of anchor weight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat weight class is the 0057206 DTX Anchor?\u003c\/strong\u003e This DTX Anchor is the 14 lb size in the Lewmar DTX lineup, part number 0057206.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included with this anchor?\u003c\/strong\u003e The Lewmar DTX Anchor 0057206 includes the anchor itself as a single one-piece unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the shank design affect how well the anchor penetrates the seabed?\u003c\/strong\u003e Yes, the DTX Anchor features a narrow shank engineered for deep penetration, helping it dig in and hold rather than skate across the bottom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor suitable for saltwater use?\u003c\/strong\u003e The stainless steel construction of the Lewmar DTX Anchor 0057206 is suited to resist corrosion in saltwater and freshwater marine environments.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":49025131872475,"sku":"LEW-0057206","price":562.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61DE12zUoqL.jpg?v=1785331031"},{"product_id":"lewmar-vector-manual-shallow-water-anchor-8-ft-depth-white-part-2024008752","title":"Lewmar Vector Manual Shallow Water Anchor, 8 ft. Depth, White, Part 2024008752","description":"\u003cp\u003eThe Lewmar Vector Manual Shallow Water Anchor is a pull-rope operated anchoring system designed to hold a boat steady in water up to 8 feet deep. Unlike hydraulic shallow water anchors, the Vector Manual requires no hoses, pumps, or electric wiring, making it a low-maintenance, error-proof way to anchor in skinny water. A fiberglass spike, backed by a gas spring, penetrates the bottom and holds position through wake turbulence and rough conditions, keeping the boat locked in place.\u003c\/p\u003e\u003cp\u003eOperation is straightforward: release the elastic securing strap, loosen the tensioning and retrieval strap to lower the anchor to the bottom, then reach down and pull the retrieval strap to lock it in place for retrieval. The anchor housing is finished in powder-coated aluminum for corrosion resistance and long-term durability in a marine environment. Installation is simplified by compatibility with aftermarket mounts and universal hole patterns, and an optional quick-release mounting bracket allows the anchor to be detached for transport, storage, or moving between boats.\u003c\/p\u003e\u003cp\u003eFinished in white to blend with most boat transoms, the Lewmar Vector Manual Shallow Water Anchor (part number 2024008752) suits boaters who want reliable shallow-water holding without the complexity or maintenance demands of a powered system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lewmar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2024008752\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Shallow Water Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Depth Capacity:\u003c\/strong\u003e 8 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeployment Method:\u003c\/strong\u003e Manual pull-rope\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetention:\u003c\/strong\u003e Gas spring secured fiberglass spike\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Compatible with aftermarket mounts and universal hole patterns; optional quick-release mounting bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpike Material:\u003c\/strong\u003e Fiberglass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Finish:\u003c\/strong\u003e Powder-coated aluminum, corrosion-resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 26.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 66.75 x 14 x 7.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011854384\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow deep can the Lewmar Vector Manual Shallow Water Anchor be used?\u003c\/strong\u003e The Lewmar Vector Manual Shallow Water Anchor (part number 2024008752) is designed for water up to 8 feet deep, using a fiberglass spike to hold position on the bottom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this anchor require any hoses, pumps, or wiring to install?\u003c\/strong\u003e No. The Vector Manual model operates entirely by a pull-rope and strap system, so there are no hoses, pumps, or electric wiring to install, unlike hydraulic shallow water anchors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you deploy and retrieve the Lewmar Vector Manual anchor?\u003c\/strong\u003e Release the elastic securing strap and loosen the tensioning and retrieval strap to lower the anchor to the bottom; to retrieve, reach down, pull the retrieval strap, and lock the anchor back in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps the anchor spike stable in rough water?\u003c\/strong\u003e A gas spring secures the fiberglass spike on the Lewmar Vector Manual Shallow Water Anchor, providing steady positioning and resistance to wake turbulence.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the anchor housing made of?\u003c\/strong\u003e The housing on part number 2024008752 has a powder-coated aluminum finish, chosen for corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this anchor come in?\u003c\/strong\u003e This Lewmar Vector Manual Shallow Water Anchor is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lewmar Vector Manual Shallow Water Anchor weigh?\u003c\/strong\u003e The anchor weighs 26.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Lewmar Vector Manual anchor?\u003c\/strong\u003e The product measures 66.75 x 14 x 7.25 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this anchor be removed for transport or storage?\u003c\/strong\u003e Yes, an optional quick-release mounting bracket lets the Vector Manual anchor be detached easily for transport, storage, or moving between boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs special mounting hardware needed to install this anchor?\u003c\/strong\u003e No special hardware is required; the Lewmar Vector Manual Shallow Water Anchor is compatible with aftermarket mounts and universal hole patterns for straightforward installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the manual or powered version of the Lewmar Vector anchor?\u003c\/strong\u003e Part number 2024008752 is the manual version, operated by a pull-rope and strap system rather than an electric or hydraulic mechanism.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":49025132101851,"sku":"LEW-2024008752","price":559.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61obT9g1iCL.jpg?v=1785331069"},{"product_id":"lewmar-galvanized-steel-delta-anchor-22-lbs-for-boats-25-to-35-feet","title":"Lewmar Galvanized Steel Delta Anchor, 22 lbs, for Boats 25 to 35 Feet","description":"\u003cp\u003eThe Lewmar Delta Anchor is a 22 pound galvanized steel plow-style anchor designed for boats between 25 and 35 feet. Built from high-grade manganese steel, it features a one-piece design with a narrow shank for deep penetration and a lead-ballasted tip that quickly finds the optimal center of gravity as it digs into the seabed. This ballast in the toe allows the anchor to set immediately on contact, and its low profile and self-righting geometry keep it setting consistently across grass, rock, sand, and weed bottoms.\u003c\/p\u003e\u003cp\u003eAn integrated eye at the tip accepts a trip line, giving boaters a reliable way to break the anchor free from a fouled set. The anchor is self-launching and balanced to fall freely from a bow roller, making it well suited for use with a remotely operated windlass as well as manual deployment. The galvanized finish is built to resist corrosion in harsh marine environments, and the anchor's holding power per pound has been certified by Lloyd's Register. It is backed by a lifetime guarantee against breakage.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lewmar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0057410\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 27-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 12-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized manganese steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 25 feet to 35 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e One-piece plow (Delta) style with lead-ballasted tip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrip Line Attachment:\u003c\/strong\u003e Integrated eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e Lloyd's Register certified holding power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 743683314599\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Lewmar 0057410 Delta Anchor designed for?\u003c\/strong\u003e This 22 pound Lewmar Delta Anchor is recommended for boats between 25 and 35 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this anchor weigh?\u003c\/strong\u003e The Lewmar Delta Anchor, part number 0057410, weighs 22 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the anchor made of?\u003c\/strong\u003e It is constructed from high-grade manganese steel with a galvanized finish for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this anchor have a trip line attachment?\u003c\/strong\u003e Yes, the Lewmar Delta Anchor 0057410 has an integrated eye at the tip specifically for attaching a trip line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor self-launching?\u003c\/strong\u003e Yes, the anchor is balanced to fall freely from a bow roller on its own, making it compatible with a remotely operated windlass or manual deployment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bottom types does the Delta Anchor work well in?\u003c\/strong\u003e The lead-ballasted tip and low-profile design let the Lewmar Delta Anchor set and hold in grass, rock, sand, and weeds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 22 pound Delta Anchor?\u003c\/strong\u003e The anchor measures 27-3\/8 inches long by 12-1\/4 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on this anchor?\u003c\/strong\u003e The Lewmar Delta Anchor, model 0057410, is backed by a lifetime guarantee against breakage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the anchor have a ballasted tip?\u003c\/strong\u003e The lead ballast in the toe of the anchor quickly finds the optimal center of gravity, allowing it to dig into the seabed and set immediately when dropped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the holding power of this anchor certified?\u003c\/strong\u003e Yes, the Lewmar Delta Anchor's holding power per pound is certified by Lloyd's Register.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included with this anchor?\u003c\/strong\u003e The Lewmar Delta Anchor 0057410 includes one anchor; rode, chain, and shackles are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a one-piece or folding anchor design?\u003c\/strong\u003e The Delta Anchor 0057410 is a one-piece design with a narrow shank profile, not a folding or multi-piece anchor.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":49025133347035,"sku":"LEW-57410","price":326.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41GMPyun2IL.jpg?v=1785331039"},{"product_id":"lewmar-claw-anchor-0057905-11-lb-galvanized-steel-bruce-style-anchor-for-boats-21-36-ft","title":"Lewmar Claw Anchor 0057905, 11 lb Galvanized Steel Bruce-Style Anchor for Boats 21-36 ft","description":"\u003cp\u003eThe Lewmar Claw Anchor (part number 0057905) is an 11 pound galvanized steel anchor built for boats in the 21 to 36 foot range. It uses a Bruce-style claw design, which is prized for setting quickly across a variety of seabeds and resetting reliably as a boat veers with wind or current. The anchor is machined from a single piece of high-tensile, heat-treated steel, giving it exceptional strength without a welded joint that could become a failure point. A galvanized finish is applied over the steel to resist corrosion in the moisture, salt spray, and general wear that come with regular marine use, helping the anchor hold up over repeated deployments.\u003c\/p\u003e\u003cp\u003eBecause the claw shape sits low and stows cleanly, this anchor works with a range of bow roller styles, which makes dropping, weighing, and stowing straightforward on boats already set up with a roller. The anchor ships as a single complete unit with no assembly required. Lewmar offers this claw anchor across a range of sizes and weights, and the 11 pound version shown here is sized for smaller to mid-size boats within the 21-36 foot range; boaters with larger vessels should size up accordingly. This is the anchor only; rode, chain, and shackles are sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lewmar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0057905\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Claw Anchor (Bruce-style)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel, one-piece, high-tensile, heat-treated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 21 feet to 36 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Lewmar 0057905 claw anchor designed for?\u003c\/strong\u003e This 11 pound Lewmar claw anchor is sized for boats between 21 and 36 feet. Larger vessels should step up to a heavier size in Lewmar's claw anchor range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Lewmar 0057905 anchor made of?\u003c\/strong\u003e It is made from one-piece, high-tensile, heat-treated steel, then finished with a galvanized coating for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Lewmar 0057905 a Bruce-style anchor?\u003c\/strong\u003e Yes, it uses a Bruce-style claw design, which sets quickly across a variety of seabeds and resets as the boat veers with wind or current.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lewmar claw anchor 0057905 weigh?\u003c\/strong\u003e The Lewmar 0057905 claw anchor weighs 11 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Lewmar 0057905 anchor include chain or rode?\u003c\/strong\u003e No, this listing is for the anchor only; the included components are the anchor itself. Rode, chain, and shackles are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Lewmar 0057905 fit my bow roller?\u003c\/strong\u003e The claw shape of this anchor is designed to work with a variety of bow roller styles, making it straightforward to drop, weigh, and stow on most roller setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Lewmar 0057905 anchor rust resistant?\u003c\/strong\u003e Yes, the anchor is galvanized after being formed from heat-treated steel, giving it a finish built to withstand moisture, weather, and general marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a one-piece anchor construction mean for durability?\u003c\/strong\u003e The Lewmar 0057905 is forged from a single piece of high-tensile steel rather than welded sections, which removes a common failure point and gives it a rock-solid hold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Lewmar make this claw anchor in other sizes?\u003c\/strong\u003e Yes, Lewmar offers this claw anchor design across a range of sizes and weights so boaters can match the anchor to their boat style and length; part number 0057905 is the 11 pound size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Lewmar 0057905 a genuine Lewmar product?\u003c\/strong\u003e Yes, part number 0057905 is a genuine Lewmar claw anchor, not an aftermarket copy.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":49025133478107,"sku":"LEW-57905","price":67.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51fPDABJ-3L.jpg?v=1785330999"},{"product_id":"jim-buoy-927-24-inch-trolling-sea-anchor","title":"Jim-Buoy 927 24 Inch Trolling Sea Anchor","description":"\u003cp\u003eThe Jim-Buoy 927 is a 24 inch trolling-type sea anchor designed to slow a boat's drift and hold a steadier heading while trolling. The body is vinyl coated for durability on the water, and it uses 1 inch polypropylene shroud lines to connect the anchor to the boat. This trolling design is built to collapse easily for compact storage when not in use, making it simple to stow aboard between outings. It is finished in gold and supplied as a single unit (1 count).\u003c\/p\u003e\u003cp\u003eThis sea anchor is intended for trolling use only and is not rated for storm conditions; boaters looking for a storm anchor should use a dedicated storm-rated model rather than the 927. The Jim-Buoy 927 is identified by manufacturer part number 927 (also listed as CAL927) and is a straightforward, no-frills accessory for anglers and boaters who want more control over boat speed and drift while trolling.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jim-Buoy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 927\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Sea Anchor \/ Drift Sock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene (PP), vinyl coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShroud Lines:\u003c\/strong\u003e 1 inch polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Uses:\u003c\/strong\u003e Boating, Trolling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.925 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 053154009276\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Jim-Buoy 927 used for?\u003c\/strong\u003e The Jim-Buoy 927 is a trolling-type sea anchor used to slow a boat's drift and help hold a steadier course while trolling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 927 sea anchor rated for storm use?\u003c\/strong\u003e No, the Jim-Buoy 927 is a trolling sea anchor and is not intended for storm use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Jim-Buoy 927 sea anchor?\u003c\/strong\u003e It measures 24 inches, matching the size designation of the Jim-Buoy 927 model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 927 sea anchor made from?\u003c\/strong\u003e The body is vinyl coated with 1 inch polypropylene shroud lines connecting it to the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Jim-Buoy 927 weigh?\u003c\/strong\u003e The Jim-Buoy 927 sea anchor weighs 0.925 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Jim-Buoy 927 fold down for storage?\u003c\/strong\u003e Yes, this trolling sea anchor easily collapses for compact storage when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Jim-Buoy 927 sea anchor?\u003c\/strong\u003e The Jim-Buoy 927 sea anchor is finished in gold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many sea anchors come in one order of the 927?\u003c\/strong\u003e One order includes a single Jim-Buoy 927 sea anchor (1 count).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Jim-Buoy 927 and the 925 model?\u003c\/strong\u003e The 925 sea anchor is designed for use with a horseshoe buoy, while the Jim-Buoy 927 is a standard 24 inch trolling sea anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for this sea anchor?\u003c\/strong\u003e The manufacturer part number is 927, also referenced as CAL927.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Jim-Buoy 927 be used for anchoring in rough weather?\u003c\/strong\u003e No, the Jim-Buoy 927 is a trolling sea anchor and should not be relied on in storm conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat line size attaches to the Jim-Buoy 927 sea anchor?\u003c\/strong\u003e It uses 1 inch polypropylene shroud lines.\u003c\/p\u003e","brand":"Cal-June","offers":[{"title":"Default Title","offer_id":49027444998363,"sku":"CAL-927","price":132.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51lMQXvY4GL.jpg?v=1785331016"},{"product_id":"greenfield-products-beach-spike-boat-anchor-vinyl-coated-sand-anchor-for-beach-and-shore","title":"Greenfield Products Beach Spike Boat Anchor - Vinyl Coated Sand Anchor for Beach and Shore","description":"\u003cp\u003eThe Greenfield Products Beach Spike Boat Anchor (part number 3028-B) is a sand anchor built for tying up to the bank or beach rather than anchoring in open water. Its slide-hammer action lets you drive the spike deep into sand for a secure hold, and a wing nut loosens to allow this self-driving hammer motion. The anchor is built around a 1 inch steel pipe with a 5\/8 inch steel shaft, finished in a vinyl coating over a black powder-coated exterior for corrosion resistance. A textured PVC grip covers the handle for a secure hold when driving or removing the spike, and a steel cleat is built in for tying off your line. Because it collapses down to a compact size, the Beach Spike Boat Anchor stores easily in ski lockers or under back-to-back boat seating, making it a practical choice for boats and kayaks with limited storage space. It is designed for anchoring in sand at the beach or shoreline, not as a traditional open-water anchor.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Greenfield Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 3028-B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Kayak Anchors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Type:\u003c\/strong\u003e Sand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Material:\u003c\/strong\u003e Alloy Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Material:\u003c\/strong\u003e Alloy Steel, Polyvinyl Chloride (PVC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 1 inch steel pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Diameter:\u003c\/strong\u003e 5\/8 inch steel shaft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip Type:\u003c\/strong\u003e Textured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleat:\u003c\/strong\u003e Steel cleat for line attachment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 025552030282\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Beach Spike Boat Anchor used for?\u003c\/strong\u003e The Greenfield Products Beach Spike Boat Anchor (3028-B) is designed for tying up to a bank or beach rather than anchoring in open water. Its slide-hammer action drives the spike deep into sand for a secure hold on shore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the slide-hammer action work?\u003c\/strong\u003e A wing nut on the 3028-B Beach Spike loosens to allow the shaft to slide freely along the pipe, so you can drive the spike into the sand with a hammering motion using the handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Beach Spike made of?\u003c\/strong\u003e It has a 1 inch steel pipe with a 5\/8 inch steel shaft, an alloy steel head, and a vinyl coated, black powder-coated finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the anchor have a place to tie off a line?\u003c\/strong\u003e Yes, the Beach Spike Boat Anchor includes a steel cleat built into the design specifically for line attachment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Beach Spike Boat Anchor?\u003c\/strong\u003e The 3028-B Beach Spike is finished in black with a powder-coated exterior over the vinyl coated steel construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Beach Spike Boat Anchor weigh?\u003c\/strong\u003e The Greenfield Products Beach Spike (3028-B) weighs 7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Beach Spike be stored in a small space?\u003c\/strong\u003e Yes, it is compact enough to store in ski lockers or under back-to-back seating on a boat, which is a key advantage over bulkier traditional anchors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the handle comfortable to grip when driving the anchor?\u003c\/strong\u003e The 3028-B has a textured PVC grip on the handle, giving a secure hold when hammering the spike into sand or pulling it back out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor suitable for open-water anchoring?\u003c\/strong\u003e No, the Beach Spike Boat Anchor is built for driving into sand at a beach or shoreline, not for anchoring a boat in open water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Greenfield Products Beach Spike?\u003c\/strong\u003e The UPC for the Beach Spike Boat Anchor (3028-B) is 025552030282.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come with the Beach Spike Boat Anchor?\u003c\/strong\u003e The 3028-B ships as a single complete unit, listed as 1 item.\u003c\/p\u003e","brand":"Greenfield Products","offers":[{"title":"Default Title","offer_id":49027996549339,"sku":"G-P-3028-B","price":66.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2__82867.1763741540.500.750.jpg?v=1785164304"},{"product_id":"greenfield-products-navy-anchor-20-lb-painted-silver-finish-333-20","title":"Greenfield Products Navy Anchor, 20 lb, Painted Silver Finish, 333-20","description":"\u003cp\u003eThe Greenfield Products Navy Anchor (part number 333-20) is a 20 pound navy-style boat anchor finished in painted silver. Navy anchors are a traditional stockless anchor design widely used on recreational and small craft for their compact stowage profile and dependable holding shape. This anchor weighs 20 pounds and ships in package dimensions of 10 x 9 x 8 inches, making it suited for boaters who need a solid mid-weight anchor for their vessel. The painted silver finish gives the anchor a clean, finished appearance on deck or in an anchor locker. As a Greenfield Products anchor, it is built to the company's standard navy anchor pattern and is identified by UPC 025552333208 for easy ordering and inventory matching. Boaters looking to size ground tackle for their boat can use the 20 pound weight class as a straightforward reference point when comparing anchor options.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Greenfield Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 333-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Navy Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 10 x 9 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\/Color:\u003c\/strong\u003e Silver Painted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 025552333208\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Greenfield 333-20 navy anchor weigh?\u003c\/strong\u003e The Greenfield Products navy anchor, part number 333-20, weighs 20 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does this navy anchor come in?\u003c\/strong\u003e Part number 333-20 has a painted silver finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions for the Greenfield 333-20 anchor?\u003c\/strong\u003e The 333-20 navy anchor ships in package dimensions of 10 x 9 x 8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Greenfield Products 333-20 navy anchor?\u003c\/strong\u003e The UPC for the Greenfield Products navy anchor, part number 333-20, is 025552333208.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 333-20 a navy-style anchor?\u003c\/strong\u003e Yes, the Greenfield Products 333-20 is a navy anchor design, listed under Greenfield's Navy Anchors category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes the 333-20 anchor?\u003c\/strong\u003e The 333-20 navy anchor is made by Greenfield Products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat weight class of anchor is the 333-20?\u003c\/strong\u003e The Greenfield 333-20 is a 20 pound anchor, useful as a reference point when sizing ground tackle for a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 333-20 navy anchor include mounting hardware or a shackle?\u003c\/strong\u003e The available specifications for the Greenfield 333-20 navy anchor do not list included hardware or a shackle; only the anchor itself, its weight, finish, and dimensions are specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Greenfield 333-20 anchor a genuine Greenfield Products part?\u003c\/strong\u003e Yes, part number 333-20 is a genuine Greenfield Products navy anchor, identified by that manufacturer part number and UPC 025552333208.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Greenfield 333-20 anchor?\u003c\/strong\u003e The Greenfield 333-20 navy anchor has a silver painted finish.\u003c\/p\u003e","brand":"Greenfield Products","offers":[{"title":"Default Title","offer_id":49031103250651,"sku":"G-P-33320","price":55.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51xAWffWhXL.jpg?v=1785208891"},{"product_id":"greenfield-products-516-r-vinyl-coated-tri-fluke-river-anchor-16-pounds-royal-blue-for-boats-under-18-feet","title":"Greenfield Products 516-R Vinyl Coated Tri-Fluke River Anchor, 16 Pounds, Royal Blue, for Boats Under 18 Feet","description":"\u003cp\u003eThe Greenfield Products 516-R is a 16 pound tri-fluke river anchor built for boats under 18 feet that need reliable holding power in rivers and current. Unlike anchors designed only for soft mud, the tri-fluke design is engineered to penetrate soft and moderate river bottoms while also engaging rocks and structure, giving it more versatile holding performance in moving water than a single-purpose anchor style. The cast iron body is protected by a vinyl coating that helps prevent the anchor from scratching or marking the boat's hull and finish during retrieval and stowage.\u003c\/p\u003e\u003cp\u003eWeighing 16 pounds, the 516-R is well suited as a primary anchor for lighter craft or as a second anchor aboard larger boats, such as for stern anchoring in current. For proper holding, a recommended scope ratio of 5:1 (line feet to depth feet) should be used. Because the anchor is cast and coated, actual weight can vary slightly batch to batch, with 16 pounds representing the listed and approximate weight for this size. The Royal Blue vinyl finish provides a durable, corrosion-resistant coating over the cast iron fluke and shank.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Greenfield Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 516-R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e River Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Style:\u003c\/strong\u003e Tri-Fluke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast iron, vinyl coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Royal Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e Under 18 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Scope Ratio:\u003c\/strong\u003e 5:1 (line feet to depth feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 025552516038\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Greenfield 516-R river anchor designed for?\u003c\/strong\u003e The 516-R is designed to hold boats under 18 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 516-R river anchor weigh?\u003c\/strong\u003e This river anchor weighs 16 pounds, with actual weight able to vary slightly since it is a cast and coated product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a tri-fluke anchor design good for?\u003c\/strong\u003e A tri-fluke design like the one used on the 516-R allows the flukes to penetrate soft and moderate river bottoms while also engaging rocks and structure in rivers and current, making it more versatile than a single-purpose anchor in moving water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 516-R river anchor made from?\u003c\/strong\u003e The 516-R is made from cast iron with a vinyl coating over the body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the anchor vinyl coated?\u003c\/strong\u003e The vinyl coating on the 516-R protects the boat's finish from scratches or marks when the anchor is being retrieved or stowed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 516-R river anchor?\u003c\/strong\u003e The 516-R river anchor has a Royal Blue vinyl-coated finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat scope ratio should I use with this anchor?\u003c\/strong\u003e A recommended scope ratio of 5:1 (line feet to depth feet) should be used with the 516-R river anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 516-R be used as a second anchor on a larger boat?\u003c\/strong\u003e Yes, the 516-R is a good all-purpose anchor for lighter craft and also works well as a second anchor, such as for stern anchoring in current on larger boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 516-R suited for muddy or rocky river bottoms?\u003c\/strong\u003e The tri-fluke design of the 516-R is recommended for soft to moderate bottom conditions and is built to engage rocks and structure typically found in rivers and current.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the listed weight of the 516-R vary?\u003c\/strong\u003e Yes, because the 516-R is a cast iron anchor with a vinyl coating, actual weights can vary due to metal and coating content, so 16 pounds is the listed approximate weight.\u003c\/p\u003e","brand":"Greenfield Products","offers":[{"title":"Default Title","offer_id":49031103578331,"sku":"G-P-516-R","price":45.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51xUniNRGLL.jpg?v=1785208899"},{"product_id":"greenfield-products-516-rd-vinyl-coated-tri-fluke-river-anchor-16-lb-red","title":"Greenfield Products 516-RD Vinyl Coated Tri-Fluke River Anchor, 16 lb, Red","description":"\u003cp\u003eThe Greenfield Products 516-RD is a 16 pound tri-fluke river anchor built for boats under 18 feet. Its tri-fluke cast iron design is engineered to penetrate soft and moderate river bottoms while also engaging rocks and structure in current, making it effective in the changing conditions found in rivers and moving water. This design makes it a solid all-purpose anchor for lighter craft, and it also works well as a second anchor aboard larger boats.\u003c\/p\u003e\u003cp\u003eThe anchor is finished with a vinyl coating that protects the boat's finish from scuffs and scratches during handling and stowage, and the coating is applied in red for easy visibility on deck or in a locker. For anchoring in typical river and current conditions, a recommended scope of 5:1 (line feet to depth feet) is advised to keep the flukes set. Because the anchor is cast iron with a vinyl coating, actual weight can vary slightly from the listed 16 pounds due to differences in metal and coating content.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Greenfield Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 516-RD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Tri-fluke river anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\/Coating:\u003c\/strong\u003e Vinyl-coated cast iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e Under 18 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Scope Ratio:\u003c\/strong\u003e 5:1 (line feet to depth feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 025552516021\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Greenfield 516-RD river anchor designed for?\u003c\/strong\u003e The 516-RD is designed to hold boats under 18 feet, making it suited to smaller craft or as a second anchor on larger boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this anchor weigh?\u003c\/strong\u003e It weighs 16 pounds, though actual weight can vary slightly since the anchor is cast iron with a vinyl coating and metal\/coating content differs slightly between units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of bottom is the 516-RD best suited for?\u003c\/strong\u003e Soft and moderate river bottoms are where this tri-fluke design performs best, since the flukes are built to penetrate that type of substrate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this anchor hold in current, not just still water?\u003c\/strong\u003e Yes, the tri-fluke design is built to engage rocks and structure in rivers and current, not just soft bottom conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat scope should I use with the Greenfield 516-RD?\u003c\/strong\u003e A scope ratio of 5:1, meaning 5 feet of line for every 1 foot of water depth, is recommended for this river anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the anchor made of and why is it coated?\u003c\/strong\u003e The 516-RD is cast iron with a vinyl coating in red; the coating protects the boat's hull and finish from scuffs when the anchor is stowed or handled on deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 516-RD suitable as a primary anchor or a backup?\u003c\/strong\u003e It works as a primary anchor for lighter craft under 18 feet, and it is also commonly used as a second anchor aboard bigger boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the part number 516-RD refer to?\u003c\/strong\u003e 516-RD is the manufacturer part number Greenfield Products uses for the 16 pound red vinyl-coated tri-fluke river anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the anchor come in other colors or only red?\u003c\/strong\u003e This listing, part number 516-RD, is the red vinyl-coated version of the tri-fluke river anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Greenfield 516-RD?\u003c\/strong\u003e The 516-RD ships as a single 16 pound tri-fluke river anchor unit; anchor line and chain are sold separately.\u003c\/p\u003e","brand":"Greenfield Products","offers":[{"title":"Default Title","offer_id":49031103611099,"sku":"G-P-516-RD","price":45.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51EFF6zIHSL.jpg?v=1785208899"},{"product_id":"greenfield-products-520-20-lb-vinyl-coated-tri-fluke-river-anchor-for-boats-under-24-feet","title":"Greenfield Products 520 20 lb Vinyl Coated Tri-Fluke River Anchor for Boats Under 24 Feet","description":"\u003cp\u003eThe Greenfield Products 520 is a 20 lb tri-fluke river anchor built for boaters who need reliable holding power in rivers, currents, and mixed bottom conditions. Unlike a simple fluke anchor, the tri-fluke cast iron design is engineered to penetrate soft and moderate river bottoms while also engaging rocks and structure that a boat may encounter in moving current, giving it more versatility than a single-purpose anchor. The entire anchor is finished with a black vinyl (PVC) coating that protects the boat's hull and finish from scuffs and scratches during retrieval and stowage.\u003c\/p\u003e\u003cp\u003eAt 20 pounds, the 520 is sized for boats under 24 feet, making it a solid primary anchor for lighter craft or a dependable second anchor aboard larger boats. For proper setup, a scope ratio of 5:1 (line feet to depth feet) is recommended to ensure the flukes set and hold securely. Its compact tri-fluke shape allows it to store easily in ski lockers or under back-to-back seating when not in use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Greenfield Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Design:\u003c\/strong\u003e Tri-Fluke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast Iron, Vinyl Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Black (PVC Coated)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e Under 24 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Scope Ratio:\u003c\/strong\u003e 5:1 (line feet to depth feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 025552520011\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Greenfield 520 river anchor designed for?\u003c\/strong\u003e The Greenfield Products 520 is a 20 lb river anchor designed to hold boats under 24 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Greenfield 520 anchor made of?\u003c\/strong\u003e It is a cast iron tri-fluke anchor finished with a black vinyl (PVC) coating that protects the boat's hull and finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the tri-fluke design on the 520 anchor do?\u003c\/strong\u003e The tri-fluke design lets the Greenfield 520 penetrate soft and moderate river bottoms while also engaging rocks and structure encountered in rivers and current.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the anchor scratch my boat's hull?\u003c\/strong\u003e No, the Greenfield 520's black vinyl coating is applied specifically to protect the boat's finish from scratches during handling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat scope ratio should I use with this anchor?\u003c\/strong\u003e A scope ratio of 5:1 (line feet to depth feet) is the recommended setup for the Greenfield 520 river anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Greenfield 520 anchor weigh?\u003c\/strong\u003e The Greenfield 520 river anchor weighs 20 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 520 anchor good for rocky river bottoms?\u003c\/strong\u003e Yes, the tri-fluke design of the Greenfield 520 is built to engage rocks and structure in rivers and current, not just soft or sandy bottoms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this be used as my only anchor, or just a backup?\u003c\/strong\u003e The Greenfield 520 works as a primary anchor for lighter craft under 24 feet, and it also serves well as a second anchor aboard larger boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Greenfield 520 anchor?\u003c\/strong\u003e The 520 is finished in black with a PVC vinyl coating over its cast iron body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 520 anchor suitable for lake use as well as rivers?\u003c\/strong\u003e The Greenfield 520 is designed as a river anchor, engineered to grip soft-to-moderate bottoms and engage rocks and structure in current, which also suits general all-purpose anchoring use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the tri-fluke design differ from a standard fluke anchor?\u003c\/strong\u003e Beyond penetrating soft and moderate bottoms like a standard fluke anchor, the Greenfield 520's tri-fluke shape is also designed to catch and hold on rocks and structure found in river current.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I store the Greenfield 520 anchor on my boat?\u003c\/strong\u003e Its tri-fluke shape allows the Greenfield 520 to store easily in ski lockers or under back-to-back seating.\u003c\/p\u003e","brand":"Greenfield Products","offers":[{"title":"Default Title","offer_id":49031103643867,"sku":"G-P-520","price":81.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51MOsRFvi8L.jpg?v=1785208900"},{"product_id":"greenfield-520-r-vinyl-coated-tri-fluke-river-anchor-20-lb-blue","title":"Greenfield 520-R Vinyl Coated Tri-Fluke River Anchor, 20 lb, Blue","description":"\u003cp\u003eThe Greenfield 520-R is a 20 pound vinyl coated river anchor built with a tri-fluke cast iron design for boats under 24 feet. The tri-fluke shape is engineered to penetrate soft and moderate river bottoms while also engaging rocks and structure in current, making it well suited to rivers and flowing water where a traditional fluke anchor can struggle to hold. It works well as a primary anchor for lighter craft or as a second anchor aboard a larger boat.\u003c\/p\u003e\u003cp\u003eThe anchor body is finished in a blue vinyl coating that helps protect the boat's hull and finish from scuffs and scratches during retrieval and stowage. Greenfield recommends a scope ratio of 5:1 (line feet to depth feet) for proper holding performance. Because the anchor is cast from iron and coated, actual weights can vary slightly by unit; the listed 20 pound weight is the standard approximate weight for the 520-R.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Greenfield\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520-R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e River Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Tri-Fluke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Vinyl Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e Under 24 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Scope Ratio:\u003c\/strong\u003e 5:1 (line feet to depth feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 025552520035\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Greenfield 520-R anchor designed for?\u003c\/strong\u003e The Greenfield 520-R river anchor is designed to hold boats under 24 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 520-R river anchor weigh?\u003c\/strong\u003e The 520-R weighs 20 pounds; Greenfield notes that actual weight can vary slightly since it is a cast iron product, so the listed weight is approximate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a tri-fluke anchor design good for?\u003c\/strong\u003e A tri-fluke design like the one used on the Greenfield 520-R lets the flukes penetrate soft and moderate river bottoms while also engaging rocks and structure, which makes it effective in rivers and current where a single-fluke anchor may not set well.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 520-R suitable for lake use as well as rivers?\u003c\/strong\u003e Yes, the Greenfield 520-R river anchor is described as a good all-purpose anchor for lighter craft and works as a primary or second anchor beyond just river conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does the 520-R come in?\u003c\/strong\u003e The 520-R is finished in blue vinyl coating, which helps protect the boat's hull and finish from scuffs during anchoring and retrieval.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Greenfield 520-R anchor made from?\u003c\/strong\u003e The 520-R has a tri-fluke cast iron construction with a protective vinyl coating over it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat scope ratio should I use with the 520-R anchor?\u003c\/strong\u003e Greenfield recommends a scope ratio of 5:1, meaning 5 feet of line for every 1 foot of water depth, when anchoring with the 520-R.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 520-R be used as a secondary anchor?\u003c\/strong\u003e Yes, the Greenfield 520-R is recommended as a great all-purpose anchor for lighter craft or as a second anchor on larger boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the vinyl coating on the 520-R protect my boat?\u003c\/strong\u003e Yes, the vinyl coating on the Greenfield 520-R is designed to protect the boat's finish from scratches and scuffs caused by the anchor during handling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat conditions is the 520-R best suited for?\u003c\/strong\u003e The Greenfield 520-R is recommended for soft to moderate bottom conditions and medium duty use, particularly in rivers and current where its tri-fluke design can engage rocks and structure.\u003c\/p\u003e","brand":"Greenfield Products","offers":[{"title":"Default Title","offer_id":49031103676635,"sku":"G-P-520-R","price":131.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51JmhVsoFXL.jpg?v=1785208902"},{"product_id":"greenfield-products-520-rd-vinyl-coated-river-anchor-red-20-pounds-tri-fluke-design-for-boats-under-24-feet","title":"Greenfield Products 520-RD Vinyl Coated River Anchor, Red, 20 Pounds, Tri-Fluke Design for Boats Under 24 Feet","description":"\u003cp\u003eThe Greenfield Products 520-RD is a 20 pound vinyl coated river anchor built with a tri-fluke cast iron design for boats under 24 feet. The tri-fluke shape is engineered to penetrate soft and moderate river bottoms while engaging rocks and structure in rivers and current, making it well suited for moving water rather than still water alone. Its versatility also makes it a practical all-purpose anchor for lighter craft or a reliable second anchor aboard a larger boat.\u003c\/p\u003e\u003cp\u003eThe anchor body is finished with a red vinyl coating that protects the boat's hull and finish from scrapes and scuffs during retrieval and stowage. For proper holding performance, Greenfield recommends a scope ratio of 5:1 (five feet of line for every one foot of water depth). Because the anchor is cast iron with a vinyl coating, actual weight can vary slightly from the listed 20 pounds due to metal and coating content.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Greenfield Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520-RD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e River anchor, tri-fluke design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl coated cast iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Size:\u003c\/strong\u003e Under 24 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Scope Ratio:\u003c\/strong\u003e 5:1 (line feet to depth feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 025552520028\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Greenfield 520-RD river anchor designed for?\u003c\/strong\u003e The Greenfield 520-RD is designed to hold boats under 24 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this anchor weigh?\u003c\/strong\u003e The 520-RD weighs 20 pounds, though actual weight can vary slightly due to the metal and vinyl coating content.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the tri-fluke design used for?\u003c\/strong\u003e The tri-fluke cast iron design lets the flukes penetrate soft and moderate river bottoms and engage rocks and structure in rivers and current, which is why it is called a river anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat scope (line-to-depth ratio) should I use with this anchor?\u003c\/strong\u003e Greenfield recommends a scope ratio of 5:1, meaning 5 feet of anchor line for every 1 foot of water depth, when using the 520-RD.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 520-RD anchor?\u003c\/strong\u003e This model is the red version of Greenfield's vinyl coated river anchor, designated by the RD suffix in the part number 520-RD.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the anchor coated with, and why?\u003c\/strong\u003e The 520-RD has a vinyl coating over its cast iron body, which protects the boat's hull and finish from scratches during anchor handling and stowage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this anchor be used as a second anchor on a larger boat?\u003c\/strong\u003e Yes, the 520-RD is described as a great all-purpose anchor for lighter craft, or a good second anchor on a larger boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 520-RD better suited to lakes or rivers?\u003c\/strong\u003e It is built specifically as a river anchor, with flukes meant to grip in current and engage rocks and structure, and it also works in soft to moderate bottom conditions generally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Greenfield 520-RD made of?\u003c\/strong\u003e The 520-RD is cast iron with a protective vinyl coating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many anchors come in the package?\u003c\/strong\u003e The Greenfield 520-RD ships as a single unit (unit count of 1).\u003c\/p\u003e","brand":"Greenfield Products","offers":[{"title":"Default Title","offer_id":49031103709403,"sku":"G-P-520-RD","price":81.42,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51Lpqx9tYfL.jpg?v=1785208903"},{"product_id":"greenfield-530-r-vinyl-coated-tri-fluke-river-anchor-30-lb-royal-blue","title":"Greenfield 530-R Vinyl Coated Tri-Fluke River Anchor, 30 lb., Royal Blue","description":"\u003cp\u003eThe Greenfield 530-R is a 30 lb. Tri-fluke river anchor built from cast iron and finished with a royal blue vinyl coating that protects your hull and gelcoat from scuffs and dings during anchoring. The tri-fluke design is engineered for soft and moderate river and lake bottoms, allowing the flukes to dig into silt, mud, and sand while also catching on rocks and structure in current, which makes it well suited to moving water where a standard fluke anchor can drag. Greenfield recommends this anchor for boats under 26 feet, and it works well as a primary anchor for lighter craft or as a second anchor aboard larger boats for extra holding power, a stern set, or a backup in changing conditions.\u003c\/p\u003e\u003cp\u003eFor proper holding power, Greenfield recommends a scope ratio of 5:1, meaning 5 feet of anchor line for every 1 foot of water depth. The vinyl coating not only shields your boat's finish but also helps resist corrosion on the cast iron body. Because the anchor is cast iron with a coating applied, Greenfield notes that actual weights can vary slightly from the listed 30 lb. Due to differences in metal and coating content, so listed weight should be treated as approximate.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Greenfield\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 530-R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 30 lb. River Anchor, Coated Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Lake \u0026amp; River Anchors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Style:\u003c\/strong\u003e Tri-fluke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 30 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 30 x 13.5 x 8.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Royal Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast iron with vinyl coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Scope Ratio:\u003c\/strong\u003e 5:1 (line feet to depth feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e Under 26 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 025552530034\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Greenfield 530-R river anchor designed for?\u003c\/strong\u003e Greenfield designed the 530-R to hold boats under 26 feet, making it suited to smaller craft or as a secondary anchor on larger boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 530-R river anchor weigh?\u003c\/strong\u003e The 530-R weighs 30 pounds, though Greenfield notes that actual weight can vary slightly since it depends on the metal and coating content used in casting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the tri-fluke design used for?\u003c\/strong\u003e The tri-fluke design on the 530-R lets the flukes penetrate soft and moderate river or lake bottoms while also engaging rocks and structure in rivers and current, giving it better holding power in moving water than a simple fluke anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Greenfield 530-R coated or bare cast iron?\u003c\/strong\u003e It is cast iron finished with a royal blue vinyl coating, which protects the boat's hull and gelcoat finish from scratches during anchoring and deployment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat scope ratio should I use with this anchor?\u003c\/strong\u003e Greenfield recommends a 5:1 scope ratio for the 530-R, meaning 5 feet of anchor line for every 1 foot of water depth at the anchoring location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 530-R anchor?\u003c\/strong\u003e The Greenfield 530-R measures 8.75 inches by 13.5 inches, with overall product dimensions listed as 30 x 13.5 x 8.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 530-R be used as a secondary anchor?\u003c\/strong\u003e Yes, the 530-R works well as a great all-purpose anchor for lighter craft or as a second anchor aboard larger boats needing extra holding power in a river or current.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bottom conditions is this anchor best suited for?\u003c\/strong\u003e The 530-R is recommended for soft to moderate bottom conditions and medium duty use, where the tri-fluke design can penetrate the bottom and grab onto rocks and structure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the vinyl coating serve a purpose beyond color?\u003c\/strong\u003e Yes, on the Greenfield 530-R the royal blue vinyl coating protects the boat's finish from marring and helps guard the cast iron body against corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 530-R a universal fit anchor?\u003c\/strong\u003e Yes, the Greenfield 530-R is a universal fit anchor, meaning it is not restricted to a specific boat make or model.\u003c\/p\u003e","brand":"Greenfield Products","offers":[{"title":"Default Title","offer_id":49031103774939,"sku":"G-P-530-R","price":124.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51SQ6wywhdL.jpg?v=1785208904"},{"product_id":"greenfield-products-530-rd-vinyl-coated-river-anchor-30-lb-red","title":"Greenfield Products 530-RD Vinyl Coated River Anchor, 30 lb, Red","description":"\u003cp\u003eThe Greenfield Products 530-RD is a 30 lb vinyl coated river anchor built for boats under 26 feet. It uses a tri-fluke cast iron design that is recommended for soft to moderate bottom conditions and medium duty use, allowing the flukes to penetrate soft river bottoms while also engaging rocks and structure in rivers and current. This makes it a versatile all-purpose anchor for lighter craft, or a reliable second anchor aboard a larger boat.\u003c\/p\u003e\u003cp\u003eThe cast iron body is finished with a vinyl coating that protects the boat's hull and finish from scratches and dings during retrieval and stowage. The recommended scope for this anchor is a 5:1 ratio of line feet to depth feet. Because weights can vary slightly due to metal and coating content, the listed 30 lb weight is approximate.\u003c\/p\u003e\u003cp\u003eAt 30 x 13.5 x 8.75 inches, the 530-RD is sized for boaters who need dependable holding power in river and current conditions without the bulk of a larger anchor.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Greenfield Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 530-RD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e River Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Tri-fluke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast iron with vinyl coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 30 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 30 x 13.5 x 8.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e Under 26 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Scope Ratio:\u003c\/strong\u003e 5:1 (line feet to depth feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 025552530027\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Greenfield 530-RD river anchor designed for?\u003c\/strong\u003e The 530-RD is designed to hold boats under 26 feet in length, making it suited for smaller craft or as a secondary anchor on larger boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bottom conditions does this anchor work best in?\u003c\/strong\u003e Soft and moderate bottom conditions are where the 530-RD's tri-fluke design performs best, as the flukes are made to penetrate soft river bottoms and engage rocks and structure in rivers and current.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 530-RD river anchor weigh?\u003c\/strong\u003e This river anchor weighs 30 pounds, though actual weight can vary slightly due to differences in metal and coating content.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Greenfield 530-RD?\u003c\/strong\u003e The 530-RD measures 30 x 13.5 x 8.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the anchor made of?\u003c\/strong\u003e It has a cast iron body with a vinyl coating that helps protect the boat's finish from scratches during handling and stowage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 530-RD anchor?\u003c\/strong\u003e This model is finished in red vinyl coating, as indicated by the RD designation in its part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat scope should I use with this anchor?\u003c\/strong\u003e A 5:1 ratio of line feet to depth feet is the recommended scope for the 530-RD river anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 530-RD a tri-fluke or a different anchor style?\u003c\/strong\u003e It uses a tri-fluke cast iron design, which is a three-fluke configuration intended for medium duty use in rivers and current.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this anchor be used as a secondary anchor on a bigger boat?\u003c\/strong\u003e Yes, the 530-RD is described as a great all-purpose anchor for lighter craft or a great second anchor for a larger boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy might the actual weight of my 530-RD differ slightly from 30 pounds?\u003c\/strong\u003e Weights on the 530-RD can vary due to differences in metal and coating content, so the listed 30 lb weight is approximate.\u003c\/p\u003e","brand":"Greenfield Products","offers":[{"title":"Default Title","offer_id":49031103840475,"sku":"G-P-530-RD","price":117.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51w05PPc93L.jpg?v=1785208904"},{"product_id":"greenfield-products-richter-anchor-625-b-25-lb-black-coated-mushroom-style-anchor-for-boats-under-32-feet","title":"Greenfield Products Richter Anchor 625-B, 25 lb Black Coated Mushroom-Style Anchor for Boats Under 32 Feet","description":"\u003cp\u003eThe Greenfield Products Richter Anchor (625-B) is a 25 pound black coated anchor engineered for boats less than 32 feet. Its Richter design is built to hold in a wide range of weather and bottom conditions, including rocks, mud, weeds, and sand, where it outperforms traditional anchor styles and requires less anchor line to set. The black coating adds a layer of protection that helps the anchor resist wear over time compared to an uncoated finish.\u003c\/p\u003e\u003cp\u003eA key advantage of the Richter design is its holding power at a shorter scope. It will set and hold even at a 3-to-1 scope ratio, which lets boaters and anglers anchor closer to their intended set point instead of paying out long lengths of rode to achieve a secure hold. This makes it a practical choice for anglers working tight spots or boaters anchoring in crowded anchorages where swing room is limited.\u003c\/p\u003e\u003cp\u003eConstructed of metal with a black coating, the anchor weighs 25 pounds and comes as a single unit. Note that actual weight can vary slightly due to differences in metal and coating content, with the listed weight being an approximate figure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Greenfield Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 625-B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Mushroom Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal with Coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking Strength:\u003c\/strong\u003e 25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Size:\u003c\/strong\u003e Less than 32 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Scope:\u003c\/strong\u003e 3 to 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 025552625013\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Greenfield Products 625-B anchor designed for?\u003c\/strong\u003e The 625-B Richter anchor is designed for boats less than 32 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this anchor weigh?\u003c\/strong\u003e The Greenfield Products Richter Anchor 625-B weighs 25 pounds, though actual weight can vary slightly due to differences in metal and coating content since the listed figure is approximate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bottom conditions does the Richter anchor 625-B work in?\u003c\/strong\u003e It performs in rocks, mud, weeds, and sand, and is suitable for use in all weather and bottom conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 625-B need a long scope to hold?\u003c\/strong\u003e No, it will set and hold even at a 3-to-1 scope, letting boaters and anglers stay closer to their set point than a 25-pound anchor requiring a longer scope.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 625-B anchor made from?\u003c\/strong\u003e The Greenfield Products 625-B is made of metal with a black coating that helps protect it from wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 625-B anchor?\u003c\/strong\u003e It has a black coated finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the black coating just cosmetic?\u003c\/strong\u003e No, the black coating on the 625-B is a protective layer that helps the anchor last longer, not just a color choice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the breaking strength of the 625-B anchor?\u003c\/strong\u003e The Greenfield Products Richter Anchor 625-B has a breaking strength of 25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many anchors come in the package?\u003c\/strong\u003e The 625-B ships as a single anchor, one unit count.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the listed weight say approximate?\u003c\/strong\u003e Weight on the 625-B can vary because of differences in the amount of metal and coating used during manufacturing, so 25 pounds is stated as an approximate figure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Richter 625-B better than a traditional mushroom anchor?\u003c\/strong\u003e In rocks, mud, weeds, and sand, the Richter design used in the 625-B is built to outperform traditional anchors and needs less anchor line to hold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 625-B be used for larger boats?\u003c\/strong\u003e The Greenfield Products 625-B is intended for boats less than 32 feet; it is not specified for use beyond that size.\u003c\/p\u003e","brand":"Greenfield Products","offers":[{"title":"Default Title","offer_id":49031103906011,"sku":"G-P-625B","price":163.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51ZA1dh-sWL.jpg?v=1785208909"},{"product_id":"greenfield-products-6-lb-poly-coated-slip-ring-anchor-black","title":"Greenfield Products 6 lb Poly-Coated Slip Ring Anchor, Black","description":"\u003cp\u003eThe Greenfield Products 669-6-B is a 6 lb slip ring anchor finished in a black PVC coating, designed for small boats, personal watercraft (PWC), canoes, kayaks, and other light craft that need a compact, dependable anchor for calm lake and river conditions. The slip ring design allows the anchor's flukes to pivot and dig into the bottom under load while resetting easily when retrieved, giving reliable holding power without a bulky footprint.\u003c\/p\u003e\u003cp\u003eThe full PVC coating covers the anchor body so it will not mar or scratch a PWC's hull, gelcoat, or finish when stowed or handled on deck, and the black finish is styled to blend in with most watercraft color schemes. The PVC coating also helps resist the corrosion that bare metal anchors are prone to after repeated exposure to fresh and lake water.\u003c\/p\u003e\u003cp\u003eThis anchor ships as a single unit and is sized for lake and river use where a lightweight, easy-to-stow anchor is preferred over a larger, heavier design. Its compact size makes it easy to store in a PWC's front storage compartment, a small boat's anchor locker, or a canoe\/kayak hatch.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Greenfield Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 669-6-B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Slip Ring Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Weight Class:\u003c\/strong\u003e 6 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e PVC coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRing Type:\u003c\/strong\u003e Slip ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 025552606012\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Lake and River Anchors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Greenfield Products 669-6-B anchor weigh?\u003c\/strong\u003e The 669-6-B weighs 5 pounds and is rated as a 6 lb anchor class, making it suited for personal watercraft, canoes, kayaks, and other small craft rather than larger boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this anchor made of?\u003c\/strong\u003e It is built with a PVC coating over the anchor body, giving the 669-6-B corrosion resistance and a smooth black finish rather than bare, exposed metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this anchor scratch my PWC or boat's finish?\u003c\/strong\u003e No. The PVC coating on the 669-6-B slip ring anchor is specifically applied so it will not mar or scratch a PWC's hull, gelcoat, or finish during storage or handling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this anchor come in?\u003c\/strong\u003e The 669-6-B slip ring anchor is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'slip ring' mean on this anchor design?\u003c\/strong\u003e A slip ring anchor uses a ring that slides along the shank, letting the flukes pivot to dig into the bottom under load and reset easily when the anchor is retrieved.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats or watercraft is this anchor meant for?\u003c\/strong\u003e The 669-6-B, as a 6 lb class anchor, is sized for personal watercraft, canoes, kayaks, and other small craft used on lakes and rivers rather than larger vessels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the PVC coating help with rust or corrosion?\u003c\/strong\u003e Yes, the PVC coating on the 669-6-B covers the metal anchor body and helps resist the corrosion that can develop on uncoated anchors after repeated water exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this anchor?\u003c\/strong\u003e The 669-6-B ships as a single PVC-coated slip ring anchor unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor suitable for saltwater use?\u003c\/strong\u003e The dossier for the 669-6-B specifies use for lake and river conditions; no saltwater rating is stated for this anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this anchor different from an uncoated metal anchor?\u003c\/strong\u003e Unlike a bare metal anchor, the 669-6-B has a full PVC coating that protects a boat or PWC's finish from marring and adds a layer of corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Greenfield Products 669-6-B slip ring anchor has UPC 025552606012.\u003c\/p\u003e","brand":"Greenfield Products","offers":[{"title":"Default Title","offer_id":49031104168155,"sku":"G-P-669-6-B","price":40.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41_hYkDqnWL.jpg?v=1785208914"},{"product_id":"greenfield-products-slip-ring-fluke-anchor-669-6-w-pvc-coated-white-5-pounds","title":"Greenfield Products Slip-Ring Fluke Anchor 669-6-W, PVC Coated White, 5 Pounds","description":"\u003cp\u003eThe Greenfield Products 669-6-W is a slip-ring mechanical fluke anchor built for small boats, canoes, kayaks, jon boats, and other light watercraft used on lakes and rivers. It uses a folding fluke design with a slip-ring shank connection, which lets the anchor pivot and reset its bite angle as pull direction changes, helping it re-set itself if wind or current shifts the boat. The flukes fold flat against the shank for compact, low-snag storage in an anchor locker, hatch, or storage bag.\u003c\/p\u003e\u003cp\u003eThe entire anchor body is coated in white PVC. This coating protects the underlying metal from corrosion and abrasion in fresh and salt water environments, and it also protects boat gelcoat, hull paint, and interior surfaces from scratches and dings during handling, stowing, and retrieval. The white finish keeps the anchor visually clean and easy to spot on deck.\u003c\/p\u003e\u003cp\u003eThis anchor is sized and marketed as the #6 model in the Greenfield slip-ring fluke line and weighs 5 pounds, placing it in the lighter-duty range suited to smaller boats and calmer inland waters rather than large offshore vessels. It measures 18 inches in length, 16 inches in width, and 4.25 inches in height when assembled.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Greenfield Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 669-6-W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Slip Ring Anchor #6-White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Type:\u003c\/strong\u003e Slip-ring mechanical fluke anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyvinyl Chloride (PVC) coated metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 4.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Lake and River Anchors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 025552606043\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat type of anchor is the Greenfield 669-6-W?\u003c\/strong\u003e It is a slip-ring mechanical fluke anchor, meaning the shank connects to the flukes through a sliding ring that allows the anchor to pivot and reset its holding angle as pull direction changes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this anchor weigh?\u003c\/strong\u003e The Greenfield Products 669-6-W weighs 5 pounds, making it suited to smaller boats, canoes, kayaks, and similar light watercraft on lakes and rivers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 669-6-W anchor?\u003c\/strong\u003e This anchor measures 18 inches in length, 16 inches in width, and 4.25 inches in height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material and coating does this anchor use?\u003c\/strong\u003e It is built from metal with a white polyvinyl chloride (PVC) coating over the entire anchor body, protecting both the anchor and the boat surfaces it contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the anchor coated in PVC instead of left bare metal?\u003c\/strong\u003e The white PVC coating on the 669-6-W resists corrosion in fresh and salt water and cushions contact with hull paint, gelcoat, and interior surfaces during handling and storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the flukes fold for storage?\u003c\/strong\u003e Yes, the fluke design on this Greenfield slip-ring anchor folds flat against the shank, allowing compact storage in an anchor locker, hatch, or bag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the 669-6-W anchor suited for?\u003c\/strong\u003e At 5 pounds, this Greenfield anchor is intended for small craft such as canoes, kayaks, jon boats, and other light boats used on lakes and rivers rather than large or offshore vessels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this anchor?\u003c\/strong\u003e The 669-6-W is finished in white, matching its full PVC coating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the '#6' designation refer to on this anchor?\u003c\/strong\u003e Greenfield markets this anchor as the #6 model in its slip-ring fluke anchor lineup; part number 669-6-W is the specific white, PVC-coated version of that size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs rope or chain included with the 669-6-W anchor?\u003c\/strong\u003e The Greenfield Products 669-6-W is sold as the anchor itself; anchor line, chain, or a bag are not part of this listing.\u003c\/p\u003e","brand":"Greenfield Products","offers":[{"title":"Default Title","offer_id":49031104233691,"sku":"G-P-669-6-W","price":40.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5112D7eXl4L_6f77a520-eca4-412b-b7cd-8585e6ef4b44.jpg?v=1785208917"},{"product_id":"greenfield-navy-anchor-10-pound-black-plastisol-coated-fluke-anchor","title":"Greenfield Navy Anchor, 10 Pound, Black Plastisol Coated Fluke Anchor","description":"\u003cp\u003eThis Greenfield navy anchor is a traditional fluke-style anchor built for boaters who need dependable holding power in soft to moderate bottom conditions. Rated for medium-duty use at a 10 pound capacity, the anchor digs in and sets quickly the moment it strikes bottom, making it a solid choice for smaller boats, tenders, and secondary anchoring needs.\u003c\/p\u003e\u003cp\u003eThe anchor is finished in a heavy black plastisol coating that guards against corrosion while protecting your boat's hull, deck, and gelcoat from scuffs and dings during handling, stowing, and deployment. The coating also gives the anchor a clean, uniform black finish that resists chipping in normal marine use.\u003c\/p\u003e\u003cp\u003eLike other fluke-style anchors, this anchor performs best when paired with a length of anchor chain ahead of the rode, which helps the anchor lie flat and dig into the bottom for a secure, dependable set. It ships as a single anchor unit, ready to rig with your preferred chain and line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Greenfield\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 910\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 10 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Class:\u003c\/strong\u003e 9-10 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 14 x 9.37 x 3.67 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Plastisol, no-mar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Style:\u003c\/strong\u003e Fluke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bottom Conditions:\u003c\/strong\u003e Soft to moderate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty Rating:\u003c\/strong\u003e Medium duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 025552910010\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight capacity of this anchor?\u003c\/strong\u003e This Greenfield anchor, part number 910, is rated for a 10 pound capacity, placing it in the 9-10 lb. Size class.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bottom conditions is this anchor best suited for?\u003c\/strong\u003e Soft to moderate bottom conditions are recommended for the Greenfield 910 anchor, and it is intended for medium-duty use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need chain with this anchor?\u003c\/strong\u003e Yes, anchor chain is recommended for proper performance with the Greenfield 910, since like all fluke-style anchors it needs chain ahead of the rode to lie flat and set correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does this anchor come in?\u003c\/strong\u003e The Greenfield 910 anchor has a black finish created by a heavy plastisol coating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the coating scratch or mar my boat's surfaces?\u003c\/strong\u003e No, the plastisol coating on the Greenfield 910 anchor is a no-mar coating designed to protect boat surfaces from scuffs during handling and stowing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this anchor weigh?\u003c\/strong\u003e The Greenfield 910 anchor weighs 10 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this anchor?\u003c\/strong\u003e The Greenfield 910 anchor measures 14 x 9.37 x 3.67 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat style of anchor is this?\u003c\/strong\u003e This is a fluke-style navy anchor, part number 910 from Greenfield, designed to dig in and hold quickly once it strikes bottom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many anchors are included?\u003c\/strong\u003e One Greenfield 910 anchor is included per order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor good for a small boat or as a backup anchor?\u003c\/strong\u003e At a 10 pound capacity and medium-duty rating, the Greenfield 910 anchor works well for smaller boats or as a secondary anchor aboard larger boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow quickly does this anchor set?\u003c\/strong\u003e The Greenfield 910 anchor digs in and holds the moment it strikes bottom, making for a fast, dependable set in soft to moderate conditions.\u003c\/p\u003e","brand":"Greenfield Products","offers":[{"title":"Default Title","offer_id":49031104266459,"sku":"G-P-910","price":34.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/313oQgLPkyL.jpg?v=1785208917"},{"product_id":"greenfield-products-910-rd-navy-anchor-10-lb-red-plastisol-coated-gray-iron","title":"Greenfield Products 910-RD Navy Anchor, 10 lb Red Plastisol-Coated Gray Iron","description":"\u003cp\u003eThe Greenfield Products 910-RD is a 10-pound Navy-style anchor built from gray iron casting with an aluminum painted finish, then finished in a heavy, no-mar resistant red plastisol coating. The plastisol coating protects boat hulls and gelcoat from scuffs and scratches during anchor handling and stowage while also guarding the cast iron body against corrosion. The classic Navy anchor design is engineered to dig in and hold quickly once it strikes bottom, making it a dependable choice for small to mid-size boats that need a compact, reliable ground tackle option.\u003c\/p\u003e\u003cp\u003eThe anchor measures 13.5 x 9 x 3.25 inches and weighs 10 pounds, a size and weight profile suited to boats that call for a moderate-holding-power anchor without the bulk of larger fluke or plow-style designs. Each unit ships as a single, complete anchor ready to be paired with anchor rode and chain of the appropriate size for the boat and expected bottom conditions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Greenfield Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 910-RD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Navy Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Plastisol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Gray iron casting with aluminum painted finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 13.5 x 9 x 3.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 13.5 x 9.02 x 3.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 025552910027\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 anchor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Greenfield Products 910-RD anchor weigh?\u003c\/strong\u003e The 910-RD Navy anchor weighs 10 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 910-RD anchor?\u003c\/strong\u003e The 910-RD measures 13.5 x 9 x 3.25 inches as an individual item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 910-RD anchor made of?\u003c\/strong\u003e It is made of gray iron casting with an aluminum painted finish, then coated in red plastisol for protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the 910-RD anchor coated in plastisol?\u003c\/strong\u003e The plastisol coating on the 910-RD is heavy and no-mar resistant, so it protects boat hulls and gelcoat from scratches when the anchor is handled or stowed on deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the plastisol coating protect against rust?\u003c\/strong\u003e Yes, the red plastisol coating on the Greenfield Products 910-RD covers the gray iron body and helps shield it from corrosion in addition to preventing hull scuffing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 910-RD a Navy-style anchor?\u003c\/strong\u003e Yes, the 910-RD is a Navy anchor design, built to dig in and hold quickly once it strikes bottom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 910-RD anchor?\u003c\/strong\u003e The 910-RD is finished in red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 910-RD?\u003c\/strong\u003e Each order includes one complete 910-RD Navy anchor; anchor rode and chain are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the 910-RD anchor suited for?\u003c\/strong\u003e At 10 pounds and 13.5 x 9 x 3.25 inches, the 910-RD Navy anchor is sized for small to mid-size boats needing a compact, quick-setting anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 910-RD anchor a single casting or an assembly?\u003c\/strong\u003e The 910-RD is a gray iron casting with an aluminum painted finish, coated in plastisol as a single-piece Navy anchor.\u003c\/p\u003e","brand":"Greenfield Products","offers":[{"title":"Default Title","offer_id":49031104331995,"sku":"G-P-910-RD","price":34.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51xAWffWhXL_2ef9f3f4-cb7d-4f95-88c7-25478d5ee389.jpg?v=1785208918"},{"product_id":"greenfield-products-920-navy-anchor-20-lb-black-plastisol-coated-fluke-anchor","title":"Greenfield Products 920 Navy Anchor, 20 lb Black Plastisol-Coated Fluke Anchor","description":"\u003cp\u003eThe Greenfield Products 920 Navy Anchor is a 20 pound fluke-style anchor built to dig in and hold the moment it strikes bottom. Finished in a heavy black plastisol coating, it resists marring boat gelcoat and hull surfaces during handling and stowage while adding a layer of corrosion protection. The fluke design is engineered for quick penetration into the seabed, giving boaters fast, dependable holding power without a lengthy setting process.\u003c\/p\u003e\u003cp\u003eThis anchor is recommended for soft to moderate bottom conditions and is rated for medium duty use, making it a practical choice for boats that need reliable anchoring in typical lake, river, and coastal conditions. As with other fluke-style anchors, pairing the Greenfield 920 with an anchor chain is recommended for proper performance, since chain adds weight at the anchor end that helps the fluke bite and stay set. The anchor carries a 20 pound weight capacity rating and is sold as a single unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Greenfield Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 920\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Fluke-shaped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Heavy plastisol, no-mar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Capacity:\u003c\/strong\u003e 20 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 025552920019\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Greenfield 920 anchor weigh?\u003c\/strong\u003e The Greenfield Products 920 Navy Anchor weighs 20 pounds and carries a matching 20 pound weight capacity rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bottom conditions is this anchor best suited for?\u003c\/strong\u003e Soft to moderate bottom conditions are recommended for the Greenfield 920, and it is rated for medium duty anchoring use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need chain with this anchor?\u003c\/strong\u003e Yes, an anchor chain is recommended for the Greenfield 920, since like other fluke-style anchors it needs chain at the anchor end for proper setting and performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does the Greenfield 920 come in?\u003c\/strong\u003e The Greenfield 920 Navy Anchor has a black finish, applied as a heavy plastisol coating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the anchor coated in plastisol?\u003c\/strong\u003e The heavy no-mar plastisol coating on the Greenfield 920 protects boat surfaces from scratches and dents when the anchor is stowed or handled on deck, while also guarding the metal underneath from corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of anchor is the Greenfield 920?\u003c\/strong\u003e It is a fluke-shaped anchor, a design built to dig into the seabed and hold quickly once it strikes bottom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many anchors come in the package?\u003c\/strong\u003e One Greenfield 920 Navy Anchor is included per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Greenfield 920 set quickly?\u003c\/strong\u003e Yes, the fluke design of the Greenfield 920 is built to dig in and hold the minute it strikes bottom, without a long setting process.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Greenfield 920 Navy Anchor?\u003c\/strong\u003e The UPC for the Greenfield Products 920 Navy Anchor is 025552920019.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Greenfield 920 suitable for heavy duty anchoring?\u003c\/strong\u003e No, the Greenfield 920 is recommended for medium duty use in soft to moderate bottom conditions rather than heavy duty applications.\u003c\/p\u003e","brand":"Greenfield Products","offers":[{"title":"Default Title","offer_id":49031104495835,"sku":"G-P-920","price":80.74,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71sgsnYMFcL_f6830408-b5f2-4633-9f13-5e7aa1e49939.jpg?v=1785208922"},{"product_id":"greenfield-products-20-lb-navy-anchor-coated-blue-cast-iron-boat-anchor-920-r","title":"Greenfield Products 20 lb Navy Anchor, Coated Blue Cast Iron Boat Anchor (920-R)","description":"\u003cp\u003eThe Greenfield Products 920-R is a 20 pound Navy-style anchor built from cast iron and finished with a blue coating for corrosion resistance and easy visibility on deck or at the bow roller. This classic Navy anchor design uses a hook-type fastener and stainless steel hardware, giving it the holding strength and durability boaters expect from a traditional cast iron anchor. At 19 inches long by 17 inches wide, the 920-R is sized for boats that need a dependable, heavy-duty anchor for overnight mooring, anchoring in varied bottom conditions, or as a secondary\/storm anchor aboard larger vessels.\u003c\/p\u003e\u003cp\u003eThe cast iron construction provides substantial weight and mass for its size, helping the anchor set and hold in sand, mud, and mixed bottoms. The blue coating protects the cast iron surface from rust and saltwater exposure, extending the working life of the anchor with normal freshwater rinsing after use. This is a single anchor unit (1 piece) manufactured in the United States, ready to be paired with anchor line or chain rated for its weight and your vessel size.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Greenfield Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 920-R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Navy Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 19 inches x 17 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e Hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 12 inches x 19 inches x 17 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 025552920033\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Greenfield Products 920-R anchor weigh?\u003c\/strong\u003e The 920-R Navy anchor weighs 20 pounds, made of solid cast iron for reliable holding weight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 920-R anchor made from?\u003c\/strong\u003e Cast iron is the construction material used for the Greenfield Products 920-R Navy anchor, finished with a blue protective coating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 920-R anchor?\u003c\/strong\u003e Blue is the coating color applied to the 920-R Navy anchor to help protect the cast iron surface and make the anchor easy to spot on deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 920-R Navy anchor?\u003c\/strong\u003e The 920-R measures 19 inches long by 17 inches wide, part number 920-R from Greenfield Products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 920-R a Navy-style anchor?\u003c\/strong\u003e Yes, the Greenfield Products 920-R is a traditional Navy anchor design, a style known for dependable holding in varied bottom conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of fastener does the 920-R use?\u003c\/strong\u003e A hook-type fastener is used on the 920-R anchor, paired with stainless steel hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Greenfield Products 920-R anchor manufactured?\u003c\/strong\u003e The 920-R Navy anchor is manufactured in the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many anchors come in the package?\u003c\/strong\u003e One 920-R Navy anchor is included per package; it is sold as a single unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is used on the 920-R anchor?\u003c\/strong\u003e Stainless steel hardware is used on the Greenfield Products 920-R Navy anchor, complementing its hook fastener design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 920-R anchor coated to resist corrosion?\u003c\/strong\u003e Yes, the 920-R cast iron anchor has a blue coating applied over the cast iron body to help resist corrosion from marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the 920-R anchor suited for?\u003c\/strong\u003e At 20 pounds and 19 by 17 inches, the 920-R is sized as a heavy-duty cast iron anchor suitable for boats requiring dependable holding weight, including use as a primary or secondary anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Greenfield Products 920-R anchor?\u003c\/strong\u003e The UPC for the 920-R Navy anchor is 025552920033.\u003c\/p\u003e","brand":"Greenfield Products","offers":[{"title":"Default Title","offer_id":49031104528603,"sku":"G-P-920-R","price":63.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/415iKI1mY0L.jpg?v=1785208923"},{"product_id":"greenfield-920-rd-navy-anchor-20-pound-red-vinyl-coated","title":"Greenfield 920-RD Navy Anchor, 20 Pound, Red Vinyl Coated","description":"\u003cp\u003eThe Greenfield 920-RD is a 20 pound Navy-style anchor finished in a red vinyl coating. This classic Navy anchor design uses a heavy, stockless profile that digs into a variety of bottom conditions and is a common choice for boaters who want a dependable, no-frills anchor for holding a boat in place while anchored. The red vinyl coating adds a layer of protection against corrosion and makes the anchor easy to spot on deck or in a locker.\u003c\/p\u003e\u003cp\u003eAt 20 pounds, this anchor is sized for boaters who need a heavier-duty anchor than typical small-craft anchors provide, and its 12 x 12 x 12 inch overall footprint keeps it compact enough for storage in an anchor locker or on a bow roller sized for a Navy-style anchor. The solid cast construction is built for repeated use in day-to-day anchoring situations.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Greenfield Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 920-RD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 12 x 12 x 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Red vinyl coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Navy anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 025552920026\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Greenfield 920-RD anchor weigh?\u003c\/strong\u003e The Greenfield 920-RD Navy anchor weighs 20 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 920-RD anchor?\u003c\/strong\u003e It is finished in a red vinyl coating, which also helps protect the anchor from corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this anchor?\u003c\/strong\u003e The Greenfield 920-RD measures 12 x 12 x 12 inches overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat style of anchor is the 920-RD?\u003c\/strong\u003e It is a Navy-style anchor, a stockless design commonly used for general boat anchoring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 920-RD fit in a standard anchor locker or bow roller?\u003c\/strong\u003e At 12 x 12 x 12 inches, the 920-RD is sized to fit typical anchor lockers and bow rollers designed for a 20 pound Navy-style anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the coating on the 920-RD meant to prevent rust?\u003c\/strong\u003e Yes, the red vinyl coating on the Greenfield 920-RD is designed to add a protective layer against corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this anchor?\u003c\/strong\u003e The manufacturer part number is 920-RD, made by Greenfield Products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor suitable for a boat that needs a heavier anchor than a small folding or fluke anchor?\u003c\/strong\u003e At 20 pounds, the Greenfield 920-RD Navy anchor is built for boaters who need a heavier-duty anchoring solution than lighter small-craft anchors offer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Greenfield 920-RD anchor?\u003c\/strong\u003e The UPC for the 920-RD Navy anchor is 025552920026.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 920-RD come with rope or chain included?\u003c\/strong\u003e The 920-RD is the anchor itself; rope or chain (rode) is sold separately.\u003c\/p\u003e","brand":"Greenfield Products","offers":[{"title":"Default Title","offer_id":49031104561371,"sku":"G-P-920-RD","price":63.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51YvhFhBNVL.jpg?v=1785208925"},{"product_id":"airhead-pwc-sand-anchor-buoy-6-ft-rope-yellow-holds-35-lbs-of-sand-or-rock","title":"Airhead PWC Sand Anchor \u0026 Buoy, 6 ft. Rope, Yellow, Holds 35 lbs of Sand or Rock","description":"\u003cp\u003eThe Airhead PWC Sand Anchor \u0026amp; Buoy is a shallow-water anchoring system built to hold a personal watercraft in place without letting it drift onto the beach or into the surf line. It is designed for anchoring PWCs in shallow water so the impeller stays off the sand, protecting the pump from grounding damage while the rider is off the craft. The anchor itself is a super durable tri-laminate bag that you fill on site with up to 35 pounds of sand or rocks, so there is no heavy metal anchor to store or transport - just pack the empty bag and fill it wherever you land.\u003c\/p\u003e\u003cp\u003eA buoy floats on the surface above the anchor bag, marking its exact location so it is easy to find and retrieve, even after the tide or current shifts things around. The system includes a 6 foot rope and an oversized, finish-friendly acetyl snap hook, making it quick to clip onto the PWC and just as quick to release when it is time to head back out. The bright yellow color adds visibility in the water. It is a simple, packable solution for anyone who beaches a PWC regularly and wants to keep it secured without dragging a traditional anchor along.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Airhead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e A-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Bag Capacity:\u003c\/strong\u003e Holds up to 35 pounds of sand or rocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 8.5 inches x 6 inches x 4 inches (Length x Width x Height)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8375 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic (tri-laminate anchor bag)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Anchor bag and rope\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook Type:\u003c\/strong\u003e Oversized, finish-friendly acetyl snap hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 737826015498\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Airhead A-1 sand anchor used for?\u003c\/strong\u003e The Airhead A-1 is a sand anchor and buoy system used to anchor a personal watercraft in shallow water, keeping the impeller off the beach while the PWC is left unattended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much sand or rock does the anchor bag hold?\u003c\/strong\u003e The A-1 anchor bag holds up to 35 pounds of sand or rocks, giving it enough weight to keep a PWC secured in shallow water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the rope on the Airhead PWC anchor?\u003c\/strong\u003e It comes with a 6 foot rope connecting the anchor bag to the snap hook used to attach it to the watercraft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Airhead A-1 anchor?\u003c\/strong\u003e The Airhead A-1 sand anchor and buoy measures 8.5 inches x 6 inches x 4 inches (Length x Width x Height).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Airhead sand anchor weigh?\u003c\/strong\u003e The A-1 weighs 0.8375 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the anchor bag made of?\u003c\/strong\u003e The A-1 anchor bag is made of a super durable tri-laminate plastic material designed to hold sand or rocks without tearing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the anchor come pre-filled with sand or rocks?\u003c\/strong\u003e No, the A-1 anchor bag ships empty. You fill it on site with up to 35 pounds of sand or rocks from the beach or shoreline where you are anchoring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the A-1?\u003c\/strong\u003e The Airhead A-1 includes the tri-laminate anchor bag and the 6 foot rope with an oversized acetyl snap hook and buoy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Airhead PWC sand anchor?\u003c\/strong\u003e The A-1 sand anchor and buoy is yellow, which helps make the surface buoy easy to spot in the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the snap hook scratch my PWC's finish?\u003c\/strong\u003e No, the A-1 uses an oversized acetyl snap hook that is finish-friendly, designed not to scratch the watercraft during tie-up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the buoy help me find my anchor again?\u003c\/strong\u003e Yes, the buoy included with the Airhead A-1 floats on the surface and marks the anchor bag's location so it can be found and retrieved easily.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor suitable for deep water anchoring?\u003c\/strong\u003e The Airhead A-1 is designed for anchoring in shallow water near the beach, not for deep water mooring.\u003c\/p\u003e","brand":"Airhead","offers":[{"title":"Default Title","offer_id":49031624622299,"sku":"K-T-A-1","price":21.22,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/91QLJxjInSL.jpg?v=1785217020"},{"product_id":"airhead-jet-logic-screw-anchor-system-a-3-8-ft-zinc-plated-pwc-anchor","title":"Airhead Jet Logic Screw Anchor System A-3, 8 ft. Zinc-Plated PWC Anchor","description":"\u003cp\u003eThe Airhead Jet Logic Screw Anchor System (A-3) is a screw-style anchor built for anchoring a personal watercraft in shallow water, just off the beach. The zinc-plated anchor screws directly into compacted sand or mud in 2 to 3 feet of water, giving PWC riders and small boat owners a quick way to hold position without dropping a traditional fluke anchor. An 8 foot long marine-grade rope connects the anchor to your craft, with a large nylon snap hook spliced to each end of the rope so you can quickly clip one hook to the screw anchor and the other to your PWC or small boat.\u003c\/p\u003e\u003cp\u003eFor storage, the A-3 comes with a padded nylon case that protects your watercraft from scuffing and dampens noise while the anchor is stowed aboard. The compact design is intended for PWC and small craft use in shallow water close to shore; for larger vessels that need a different anchoring approach, a folding anchor system is available as a separate product. The Jet Logic Screw Anchor System is a simple, purpose-built solution for anyone who wants to beach or hold a PWC in shallow water without wading in to hand-hold the craft.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Airhead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e A-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Type:\u003c\/strong\u003e Screw anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Length:\u003c\/strong\u003e 8 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Water Depth:\u003c\/strong\u003e 2 to 3 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc-plated metal anchor with nylon rope and storage case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.13125 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 96 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 24.5 x 9.75 x 6.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Strength:\u003c\/strong\u003e 1000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Nylon snap hook at each end of the rope\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Case:\u003c\/strong\u003e Padded nylon storage case included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Anchoring personal watercraft and small boats in shallow water\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Airhead Jet Logic Screw Anchor System (A-3) used for?\u003c\/strong\u003e The A-3 is a screw anchor designed for anchoring a personal watercraft or small boat in shallow water, just off the beach, by screwing the zinc-plated anchor into compacted sand or mud.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow deep of water does this anchor work in?\u003c\/strong\u003e The Jet Logic Screw Anchor System A-3 is designed to screw into compacted sand or mud in 2 to 3 feet of water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the rope on this anchor?\u003c\/strong\u003e The A-3 comes with an 8 foot long marine-grade rope, with a large nylon snap hook spliced to each end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I attach the A-3 anchor to my PWC or boat?\u003c\/strong\u003e Snap one of the nylon snap hooks on the rope to the screw anchor and snap the other hook to your PWC or small boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor suitable for larger boats?\u003c\/strong\u003e The A-3 screw anchor is built for PWC and small craft in shallow water; a folding anchor system is offered as a separate product for larger vessels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the anchor itself made of?\u003c\/strong\u003e The screw anchor in the A-3 system is zinc-plated metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Airhead A-3 include a storage case?\u003c\/strong\u003e Yes, a padded nylon storage case is included with the Jet Logic Screw Anchor System to protect your watercraft and dampen noise while the anchor is stowed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the A-3 anchor system weigh?\u003c\/strong\u003e The complete Airhead Jet Logic Screw Anchor System A-3 weighs 1.13125 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the tensile strength of the anchor rope?\u003c\/strong\u003e The rope used with the A-3 screw anchor system has a tensile strength of 1000 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the A-3?\u003c\/strong\u003e The package includes the zinc-plated screw anchor, an 8 foot marine-grade rope with nylon snap hooks on each end, and a padded nylon storage case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the anchor scratch my PWC or boat during storage?\u003c\/strong\u003e No, the A-3 ships with a padded nylon storage case specifically to protect your watercraft's finish and dampen noise while the anchor is stowed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the A-3 anchor system?\u003c\/strong\u003e The Jet Logic Screw Anchor System A-3 has package dimensions of 24.5 x 9.75 x 6.25 inches and an overall length of 96 inches with the rope extended.\u003c\/p\u003e","brand":"Airhead","offers":[{"title":"Default Title","offer_id":49031624687835,"sku":"K-T-A-3","price":20.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61VzXQ8-HIL.jpg?v=1785217020"},{"product_id":"fortress-c5-a-commando-small-craft-anchoring-system-for-kayaks-and-small-boats","title":"Fortress C5-A Commando Small Craft Anchoring System for Kayaks and Small Boats","description":"\u003cp\u003eThe Fortress C5-A Commando Small Craft Anchoring System is a complete anchoring kit built for kayaks, canoes, and other small watercraft. The anchor body is constructed of plastic and is paired with stainless steel hardware, including a chain hook fastener, for a setup that resists corrosion in freshwater and saltwater environments. The system ships as a single complete unit (1 piece) so paddlers and small-boat owners have everything needed to anchor without sourcing separate components.\u003c\/p\u003e\u003cp\u003eAt 21 inches long and 8 inches wide, the C5-A is sized to stow easily in a kayak hatch, canoe hull, or small boat storage compartment while still providing secure holding power for its class. It is designed for watercraft use and suits anglers, paddlers, and small-boat operators who need a compact, dependable ground tackle solution that does not take up excessive deck or hatch space.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Fortress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e C5-A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Commando Small Craft Anchoring System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e Chain Hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 21 inches long x 8 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Vehicle Type:\u003c\/strong\u003e Watercraft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 647124910053\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Fortress C5-A Commando Small Craft Anchoring System designed for?\u003c\/strong\u003e The Fortress C5-A is a complete anchoring system designed for small watercraft such as kayaks, canoes, and other small boats, providing a compact ground tackle setup sized for these vessels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the C5-A anchor made of?\u003c\/strong\u003e The anchor body is made of plastic, paired with stainless steel hardware for the fastening components on the Fortress C5-A Commando Small Craft Anchoring System.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Fortress C5-A anchor system?\u003c\/strong\u003e It measures 21 inches long by 8 inches wide, a compact footprint that fits easily into a kayak hatch or small boat storage area.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Fortress C5-A weigh?\u003c\/strong\u003e The Fortress C5-A Commando Small Craft Anchoring System weighs 8.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of fastener does the C5-A use?\u003c\/strong\u003e A chain hook fastener made of stainless steel is used on the Fortress C5-A anchoring system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Fortress C5-A a complete anchoring kit or just the anchor?\u003c\/strong\u003e It is sold as a complete system, shipping as a single unit (1 piece) that includes the full Commando Small Craft Anchoring System.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat watercraft is the Fortress C5-A compatible with?\u003c\/strong\u003e The C5-A is intended for watercraft use, making it suitable for kayaks, canoes, and other small boats that need a compact anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the stainless steel hardware on the C5-A resist rust?\u003c\/strong\u003e Yes, the chain hook and other hardware on the Fortress C5-A are stainless steel, which resists corrosion in wet marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Fortress C5-A anchor easy to stow in a kayak?\u003c\/strong\u003e At 21 inches long and 8 inches wide, the C5-A Commando Small Craft Anchoring System is compact enough to store in a kayak hatch or small boat compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this Fortress anchor system?\u003c\/strong\u003e The manufacturer part number is C5-A, identifying the Commando Small Craft Anchoring System.\u003c\/p\u003e","brand":"Fortress Anchors","offers":[{"title":"Default Title","offer_id":49033319514331,"sku":"FOR-C5-A","price":199.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61WF2xvxMeL.jpg?v=1785244538"},{"product_id":"tuggy-products-mini-buddy-pwc-anchor-blue-compact-0-8-lb-kayak-anchor","title":"Tuggy Products Mini Buddy PWC Anchor - Blue, Compact 0.8 lb Kayak Anchor","description":"\u003cp\u003eThe Tuggy Products Mini Buddy is a compact anchor designed for personal watercraft, kayaks, and other small craft where a full-size anchor is too bulky to store or handle. Finished in blue, it is sized and weighted for easy one-hand deployment and retrieval, making it a practical choice for paddlers and PWC riders who need a simple way to hold position while fishing, swimming, or taking a break on the water. At 0.8 pounds, the Mini Buddy is light enough to stow in a hatch, dry bag, or small storage compartment without adding noticeable weight or bulk to a kayak or PWC.\u003c\/p\u003e\u003cp\u003eThis anchor is built as a straightforward, no-frills holding solution rather than a heavy-duty mooring anchor, matching the needs of small, lightweight craft rather than larger boats. Its compact footprint makes it easy to carry to and from the water and simple to deploy by hand from a kayak seat or PWC deck.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tuggy Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MB-RB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Mini Buddy PWC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Kayak Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 788758000427\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tuggy Products Mini Buddy MB-RB used for?\u003c\/strong\u003e The Mini Buddy MB-RB is a compact anchor made for personal watercraft and kayaks, used to hold a small craft in place on the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Mini Buddy PWC anchor weigh?\u003c\/strong\u003e The Tuggy Products Mini Buddy MB-RB weighs 0.8 pounds, making it light enough to carry and stow in a kayak or PWC without adding bulk.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Mini Buddy MB-RB anchor?\u003c\/strong\u003e This Mini Buddy anchor (part number MB-RB) is finished in blue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Mini Buddy anchor suitable for kayaks?\u003c\/strong\u003e Yes, the Tuggy Products Mini Buddy is sized for kayaks as well as personal watercraft, matching the smaller storage space and lighter handling needs of these craft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Mini Buddy MB-RB a heavy-duty boat anchor?\u003c\/strong\u003e No, the Mini Buddy MB-RB is a compact anchor built for small, lightweight craft like kayaks and PWCs rather than larger boats needing a heavy-duty mooring anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Tuggy Products Mini Buddy PWC anchor?\u003c\/strong\u003e The UPC for the Tuggy Products Mini Buddy MB-RB (blue) is 788758000427.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Mini Buddy anchor be deployed by hand?\u003c\/strong\u003e Yes, the compact size and 0.8 pound weight of the Tuggy Products Mini Buddy MB-RB allow for easy one-hand deployment and retrieval from a kayak or PWC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can the Mini Buddy anchor be stored on a kayak or PWC?\u003c\/strong\u003e Because the Mini Buddy MB-RB weighs only 0.8 pounds and has a compact design, it stores easily in a hatch, dry bag, or small storage compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Tuggy Products Mini Buddy MB-RB the same as their other anchor colors?\u003c\/strong\u003e The MB-RB part number designates the blue version of the Tuggy Products Mini Buddy; other colors are listed under different part numbers.\u003c\/p\u003e","brand":"Tuggy Products","offers":[{"title":"Default Title","offer_id":49033328197851,"sku":"TUG-MB-RB","price":22.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_4b453d5c-96a0-4907-af97-5a0baa5aaa2c.jpg?v=1785350971"},{"product_id":"tuggy-products-gb-g-galvanized-grapnel-anchor-kit","title":"Tuggy Products GB-G Galvanized Grapnel Anchor Kit","description":"\u003cp\u003eThe Tuggy Products GB-G is a galvanized steel grapnel anchor kit built with a folding hook design for compact storage and easy deployment. Constructed from steel\/iron with a powder-coated finish in silver, the anchor is intended for outdoor and boating use, including use as a boat anchor. The single-hook grapnel folds down for storage aboard a boat, in a truck bed, or in a storage bag, then opens to grip when set. The powder-coated finish is intended to help resist the elements during outdoor and marine use.\u003c\/p\u003e\u003cp\u003eEach kit ships as a complete, ready-to-use unit at 9.25 x 6 x 6 inches and 2.68 pounds. Because it is a single unit rather than a bundle, it is easy to size when planning storage space aboard a boat or in a gear bag.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tuggy Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e GB-G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Grapnel Anchors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\/Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Powder Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Hooks:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Uses:\u003c\/strong\u003e Outdoor, Boating - anchors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Surfaces:\u003c\/strong\u003e Concrete, Brick, Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 1 Grapnel Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 9.25 x 6 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.68 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 788758000502\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tuggy Products GB-G?\u003c\/strong\u003e The GB-G is a galvanized steel grapnel anchor kit with a folding single-hook design, made from steel\/iron with a powder-coated silver finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the GB-G grapnel anchor made of?\u003c\/strong\u003e It is made of steel\/iron with a powder-coated finish, which is the material and finish listed for the Tuggy Products GB-G anchor kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the GB-G anchor weigh?\u003c\/strong\u003e The Tuggy Products GB-G weighs 2.68 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the GB-G anchor kit?\u003c\/strong\u003e The GB-G measures 9.25 x 6 x 6 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the GB-G be used as a boat anchor?\u003c\/strong\u003e Yes, the GB-G is listed with recommended uses that include boating and anchoring, in addition to general outdoor use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the GB-G fold for storage?\u003c\/strong\u003e Yes, it is a folding grapnel\/hook style anchor, which allows it to be stowed in a smaller space when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hooks does the GB-G have?\u003c\/strong\u003e The Tuggy Products GB-G grapnel anchor kit has 1 hook.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does the GB-G come in?\u003c\/strong\u003e The GB-G has a silver color with a powder-coated finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is the GB-G recommended for?\u003c\/strong\u003e Recommended surfaces for the GB-G include concrete, brick, and metal, in addition to its use as a boat anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Tuggy Products GB-G?\u003c\/strong\u003e The kit includes 1 grapnel anchor, part number GB-G.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Tuggy Products GB-G?\u003c\/strong\u003e The UPC for the GB-G grapnel anchor kit is 788758000502.\u003c\/p\u003e","brand":"Tuggy Products","offers":[{"title":"Default Title","offer_id":49033328066779,"sku":"TUG-GB-G","price":28.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/514uKP2bmiL.jpg?v=1785245023"},{"product_id":"greenfield-richter-tri-fluke-boat-anchor-black-steel-anchor-available-in-14-lb-boats-up-to-18-and-18-lb-boats-up-to-24","title":"Greenfield Richter Tri-Fluke Boat Anchor - Black Steel Anchor, Available in 14 lb (Boats up to 18') and 18 lb (Boats up to 24')","description":"\u003cp\u003eThe Greenfield Richter Anchor is a steel tri-fluke boat anchor built to bite and hold across a wide range of bottom conditions, from soft sand and mud to rocky riverbeds and current-swept lake shorelines. Its three-fluke design lets the anchor self-right and set quickly no matter how it lands on the bottom, giving boaters confidence whether they are anchoring for the day or just holding position for lunch. Finished in durable black, the Richter Anchor works as a capable primary anchor on smaller craft and as a reliable secondary or backup anchor on larger boats. It is sold in two weight classes so you can match the anchor to your boat's length and typical anchoring conditions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Greenfield\u003c\/li\u003e\n\u003cli\u003eDesign: Tri-Fluke\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: United States\u003c\/li\u003e\n\u003cli\u003eWeight Classes: 14 lb and 18 lb\u003c\/li\u003e\n\u003cli\u003eBoat Length Range: Up to 18 feet (14 lb) or up to 24 feet (18 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eChoose the Richter Anchor based on your boat's overall length. The 614-B (14 lb) is sized for boats up to 18 feet and suits smaller runabouts, jon boats, and day cruisers. The 618-B (18 lb) is sized for boats up to 24 feet and is the better fit for larger center consoles, pontoons, and cruisers, or for boaters who anchor in stronger current or wind. If your boat sits near the upper end of a size range, or you regularly anchor in challenging bottom conditions, sizing up to the heavier anchor gives extra holding margin.\u003c\/p\u003e","brand":"Greenfield Products","offers":[{"title":"14 lb - Boats up to 18'","offer_id":49046059745499,"sku":"G-P-614-B","price":85.37,"currency_code":"USD","in_stock":true},{"title":"18 lb - Boats up to 24'","offer_id":49046059778267,"sku":"G-P-618B","price":112.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51t7pH_A0WL_ffc80d2a-f75a-4fd3-8405-35d95ba7f750.jpg?v=1785393488"},{"product_id":"gen3-marine-stainless-steel-box-style-folding-boat-anchor-available-in-13-lb-to-19-lb","title":"Gen3 Marine Stainless Steel Box-Style Folding Boat Anchor - Available in 13 lb to 19 lb","description":"\u003cp\u003eThe Gen3 Marine Box-Style Folding Anchor is a compact, corrosion-resistant anchor built from 316 stainless steel for boaters who need reliable holding power without the bulk of a traditional fluke anchor. Its hinged, box-style flukes fold flat for easy stowing, then open to dig into sandy and muddy bottoms for a secure hold in calm to moderate conditions. Each anchor ships with a matching storage bag to keep it protected and organized on board. Sized for personal watercraft, inflatables, jon boats, jet boats, and other small to mid-size vessels, this line covers boats under 17 feet up to boats under 26 feet, so you can match anchor weight to your hull size and typical anchoring conditions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Gen3 Marine\u003c\/li\u003e\n\u003cli\u003eMaterial: 316 stainless steel\u003c\/li\u003e\n\u003cli\u003eFinish: Non-polished, corrosion resistant\u003c\/li\u003e\n\u003cli\u003eStyle: Box-style folding anchor\u003c\/li\u003e\n\u003cli\u003eColor: Navy\/silver\u003c\/li\u003e\n\u003cli\u003eIncluded Components: Folding box anchor and storage bag\u003c\/li\u003e\n\u003cli\u003eRecommended Boat Types: PWC, inflatables, jon boats, jet boats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis anchor line is offered in two weights to match different boat lengths. The 13 lb anchor is recommended for boats under 17 feet, while the 19 lb anchor is built for boats under 26 feet needing additional holding power. Choose the option that corresponds to your vessel's length and typical anchoring conditions; when in doubt, sizing up provides extra margin for wind and current.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"13 lb - Boats Under 17'","offer_id":49047386882267,"sku":"GEN-5-4014","price":116.61,"currency_code":"USD","in_stock":false},{"title":"19 lb - Boats Under 26'","offer_id":49047386915035,"sku":"GEN-5-4015","price":213.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41KXu_Wl-UL_7535eda9-a963-4c68-9249-dfa22b099245.jpg?v=1785422216"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/FDFG__04580.1763741626.500.750.jpg?v=1785356940","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-anchoring-mooring-anchors-grapnel-specialty-anchors.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}