{"title":"Boat Hardware \u0026 Fittings","description":null,"products":[{"product_id":"sierra-cl49310-marine-cam-lock-kit-5-8-depth-keyed-locking-latch-for-hatches-lockers-compartments","title":"Sierra CL49310 Cam Lock, 5\/8 Inch Depth Key Lock for Marine Lockers, Hatches and Compartments","description":"\u003cp\u003eThe Sierra CL49310 is a 5\/8 inch depth cam lock designed to secure lockers, hatches, compartments, and drawers aboard a boat or in similar storage applications. It is a key lock style with a metal construction built to hold up in a marine environment where cabinet hardware is exposed to moisture and regular use. The lock uses a 5\/8 inch hole size and has a grip length of 1-1\/4 inch measured from the center of the hole, with an offset of plus or minus 1\/4 inch to accommodate the cam position needed for the installation. It is rated for a maximum panel thickness of 1\/2 inch, making it suited to typical marine cabinet and hatch panel stock. Each unit measures 0.39 x 0.39 x 0.39 inches and is supplied as a single piece.\u003c\/p\u003e\u003cp\u003eThis cam lock is commonly used to replace worn or broken locks on existing marine storage compartments, or to add locking capability to lockers, fish wells, equipment lockers, and hatch covers. Because it is a key lock, it provides secured closure rather than a simple latch, which is useful for compartments holding gear, electronics, or other items that should stay closed while underway.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CL49310\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Cabinet Hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock Type:\u003c\/strong\u003e Key Lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Size:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip Length (from center of hole):\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffset:\u003c\/strong\u003e +\/- 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Panel Thickness:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.19 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282367817\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat depth is the Sierra CL49310 cam lock?\u003c\/strong\u003e The Sierra CL49310 has a 5\/8 inch depth, which is the size printed on the part itself and used to distinguish it from Sierra's other cam lock depths.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hole size do I need to install the CL49310?\u003c\/strong\u003e A 5\/8 inch hole is required to install the Sierra CL49310 cam lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the grip length measured on this cam lock?\u003c\/strong\u003e Grip length on the CL49310 is 1-1\/4 inch measured from the center of the mounting hole, which determines how much panel thickness the cam can clamp down on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum panel thickness this lock will fit?\u003c\/strong\u003e The CL49310 is rated for a maximum panel thickness of 1\/2 inch, so it is intended for lockers, hatches, and drawer panels at or under that thickness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CL49310 a key lock or a simple latch?\u003c\/strong\u003e It is a key lock, meaning the Sierra CL49310 requires a key to open and close rather than a push-button or turn latch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the offset on the Sierra CL49310?\u003c\/strong\u003e The offset is plus or minus 1\/4 inch, which describes how far the cam sits from center once installed and helps confirm it will clear the compartment frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the CL49310 cam lock made from?\u003c\/strong\u003e The lock is made of metal construction, in keeping with its use as marine cabinet hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is this cam lock used for?\u003c\/strong\u003e The Sierra CL49310 is used to secure lockers, hatches, compartments, and drawers, including applications like storage lockers and equipment compartments aboard a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many locks come in one CL49310 unit?\u003c\/strong\u003e The CL49310 is sold as a single piece (quantity of 1).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the physical dimensions of the CL49310?\u003c\/strong\u003e Each Sierra CL49310 cam lock measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CL49310 weigh?\u003c\/strong\u003e The Sierra CL49310 weighs 0.19 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the CL49310 compare to the original equipment lock it replaces?\u003c\/strong\u003e Sierra states that this product meets or exceeds the original equipment part it replaces, making the CL49310 a suitable equivalent for the lock it is replacing.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988454355163,"sku":"SIE-CL49310","price":15.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sie-cl49310_large__76976.1558175558.500.750.jpg?v=1785189074"},{"product_id":"sierra-mp49410-1-marine-glove-box-latch-locking-with-2-keys-corrosion-resistant-glass-reinforced-polyester","title":"Sierra Universal Glove Box Latch Lock MP49410-1, 1 Inch Hole, Black Glass Reinforced Polyester, Includes 2 Keys","description":"\u003cp\u003eThe Sierra MP49410-1 glove box latch lock is a corrosion resistant storage latch built for marine use, ideal for securing glove boxes, storage compartments, and other boat panels. Molded from black glass reinforced polyester, it stands up to the marine environment without rusting or degrading like metal hardware can. The latch uses a turn-to-open mechanism rather than a finger pull, giving a cleaner look on the panel face and a simpler one-hand operation for boaters.\u003c\/p\u003e\u003cp\u003eThis latch can be locked or left in a latch-only position, so it works whether you want the compartment secured with a key or just held shut for quick access. It ships complete with 2 keys, so you are ready to install and lock it right away. It is sized for a 1 inch hole with a 1 inch depth, and is intended for panels that are 3\/4 inch thick, making it a straightforward drop-in replacement or new installation for glove boxes and storage doors of that thickness.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP49410-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Size:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Thickness:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Glass Reinforced Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black, Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock Type:\u003c\/strong\u003e Key lock; can be locked or left in latch-only position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Turn-to-open mechanism, no finger pull\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 2 keys\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2.75 x 1.75 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Resistance:\u003c\/strong\u003e Corrosion resistant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole does the Sierra MP49410-1 glove box latch require?\u003c\/strong\u003e The Sierra MP49410-1 latch requires a 1 inch hole size with a 1 inch depth for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the MP49410-1 latch be locked, or does it only latch?\u003c\/strong\u003e Yes, the MP49410-1 latch can be locked with a key, or left in a latch-only position if you do not need it secured.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many keys come with this latch?\u003c\/strong\u003e 2 keys are supplied with the Sierra MP49410-1 glove box latch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat panel thickness is the MP49410-1 latch designed for?\u003c\/strong\u003e This latch is designed for panels that are 3\/4 inch thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra MP49410-1 latch made of?\u003c\/strong\u003e It is made of black glass reinforced polyester, a durable material chosen for its resistance to corrosion in marine settings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP49410-1 glove box latch corrosion resistant?\u003c\/strong\u003e Yes, the MP49410-1 latch is corrosion resistant, making it suited to the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the MP49410-1 latch open?\u003c\/strong\u003e It uses a turn-to-open mechanism rather than a finger pull, so there is no exposed pull tab on the panel face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the MP49410-1 latch?\u003c\/strong\u003e The item dimensions of the Sierra MP49410-1 latch are 2.75 x 1.75 x 6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP49410-1 latch weigh?\u003c\/strong\u003e The Sierra MP49410-1 glove box latch weighs 0.14 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat colors is this latch available in?\u003c\/strong\u003e The Sierra MP49410-1 latch is available in black and silver.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP49410-1 latch a universal fit for boat storage compartments?\u003c\/strong\u003e It is intended for general marine storage use on glove boxes and storage compartments sized for a 1 inch hole and 3\/4 inch panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the MP49410-1 latch?\u003c\/strong\u003e The package includes the Sierra MP49410-1 latch lock body and 2 keys.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457304283,"sku":"SIE-MP49410-1","price":21.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MP49410-1__42079.1737895238.500.750.jpg?v=1785188206"},{"product_id":"sierra-mp49500-stainless-steel-non-locking-hatch-lift-latch-2-16-x-1-90-8-screw-mount-for-livewells-bait-lockers-storage-hatches","title":"Sierra MP49500 Stainless Steel Non-Locking Hatch Lift Latch, 2.16 x 1.90 Inches","description":"\u003cp\u003eThe Sierra MP49500 is a stainless steel, non-locking hatch lift latch designed for boat hatches, bait lockers, fish wells, equipment lockers, and storage compartments. It provides a simple, corrosion-resistant lift point for lids and covers that need a recessed, low-profile pull without a locking mechanism.\u003c\/p\u003e\u003cp\u003eThe latch plate and ring are made of stainless steel for durability in the marine environment, and it is built to meet or exceed the original equipment part it replaces. The MP49500 measures 2.16 inches by 1.90 inches by 0.25 inches high, and mounts using #8 screws through holes spaced 1.5 inches wide by 1.312 inches high on center, over a 3\/4 inch hole. It is part of a broader family of Sierra lift latches that includes both locking and non-locking styles for different hatch depths, but the MP49500 itself is the non-locking version.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP49500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Latch Lift\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Non-locking hatch lift latch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.16 inches x 1.90 inches x 0.25 inches (H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Screw Size:\u003c\/strong\u003e #8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Spacing:\u003c\/strong\u003e 1.5 inches (w) x 1.312 inches (h) on center\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Hole Size:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 023121495005\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Hatches and Adjusters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra MP49500 used for?\u003c\/strong\u003e The Sierra MP49500 is a hatch lift latch used on bait lockers, fish wells, equipment lockers, hatches, and storage compartments on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP49500 a locking or non-locking latch?\u003c\/strong\u003e The MP49500 is the non-locking version of Sierra's hatch lift latch; Sierra also offers locking styles as separate part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sierra MP49500 hatch lift?\u003c\/strong\u003e It measures 2.16 inches by 1.90 inches by 0.25 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the MP49500 made of?\u003c\/strong\u003e Stainless steel is used for both the plate and ring of the MP49500, giving it corrosion resistance in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size screws are needed to mount the MP49500?\u003c\/strong\u003e Mounting is done with #8 screws through holes spaced 1.5 inches wide by 1.312 inches high on center.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole does the MP49500 require in the hatch?\u003c\/strong\u003e A 3\/4 inch hole is needed to install the MP49500 latch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP49500 weigh?\u003c\/strong\u003e The MP49500 hatch lift latch weighs 0.09 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP49500 come with mounting screws included?\u003c\/strong\u003e The dossier does not specify included mounting hardware; the latch requires #8 screws sized for the stated hole pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra's MP49500 an OEM or aftermarket part?\u003c\/strong\u003e The MP49500 is manufactured by Sierra, a recognized supplier of marine engine and drive parts, and is built to meet or exceed the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the MP49500 and Sierra's other lift latch depths?\u003c\/strong\u003e Sierra offers lift latches in different depths for different hatch applications, but the MP49500 is specifically the 2.16 x 1.90 x 0.25 inch non-locking model.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457468123,"sku":"SIE-MP49500","price":12.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MP49500__22940.1722509674.500.750.jpg?v=1785187979"},{"product_id":"sierra-mp49430-locking-glove-box-latch-keyed-black-glass-reinforced-polyester-marine-hardware","title":"Sierra MP49430 Locking Glove Box Latch - Turn-to-Open, Black Glass Reinforced Polyester, 3\/4 Inch Panel","description":"\u003cp\u003eThe Sierra MP49430 is a locking latch built for glove boxes, storage compartments, and access panels aboard a boat. It uses a turn-to-open mechanism rather than a finger-pull design, giving a cleaner, snag-free surface on the panel while still allowing quick one-hand operation. Because it is a locking latch, it is supplied with 2 keys so the compartment can be secured when the boat is unattended.\u003c\/p\u003e\u003cp\u003eThe latch body is molded from black glass reinforced polyester, a material chosen for its total resistance to corrosion in the marine environment, which makes it a durable choice for saltwater or freshwater use where metal latches would eventually pit or seize. The finish is black, and the latch is sized for a 1 inch hole with a 1 inch depth, designed to be installed in a panel that is 3\/4 inch thick.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP49430\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Glove Box Latch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock Type:\u003c\/strong\u003e Locking, supplied with 2 keys\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Turn-to-open, no finger pull\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black glass reinforced polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Resistance:\u003c\/strong\u003e Totally corrosion resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Size:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Depth:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Thickness:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.11 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for panels 3\/4 inch thick with a 1 inch diameter, 1 inch deep mounting hole; not restricted to a specific boat make or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole do I need to install the Sierra MP49430 latch?\u003c\/strong\u003e The MP49430 requires a 1 inch diameter hole with a 1 inch depth in the panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP49430 come with keys?\u003c\/strong\u003e Yes, the Sierra MP49430 is a locking latch supplied with 2 keys.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP49430 a locking or non-locking latch?\u003c\/strong\u003e The MP49430 is the locking version of this latch, which is why it ships with 2 keys.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick does my panel need to be for this latch to fit?\u003c\/strong\u003e The MP49430 is designed for a panel that is 3\/4 inch thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra MP49430 latch made from?\u003c\/strong\u003e It is molded from black glass reinforced polyester, a material that is totally corrosion resistant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the MP49430 latch open?\u003c\/strong\u003e It uses a turn-to-open mechanism rather than a finger pull, so there is no exposed pull tab on the panel surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP49430 suitable for marine or saltwater environments?\u003c\/strong\u003e Yes, the black glass reinforced polyester construction of the MP49430 is totally corrosion resistant, which suits marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra MP49430 latch?\u003c\/strong\u003e The MP49430 is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP49430 latch weigh?\u003c\/strong\u003e The Sierra MP49430 weighs 0.11 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sierra MP49430?\u003c\/strong\u003e The MP49430 latch is supplied with 2 keys for its locking mechanism.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this latch?\u003c\/strong\u003e The part is identified by Sierra part number MP49430.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457533659,"sku":"SIE-MP49430","price":20.67,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sie-mp49430_lg__92762.1558133985.500.750.jpg?v=1785188255"},{"product_id":"sea-dog-041424-1-pull-up-cleat-316-stainless-steel-flush-mount-recessed-deck-cleat-with-backing-plate","title":"Sea-Dog 041424-1 Pull-Up Cleat, 6-1\/2 Inch, Investment Cast 316 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog 041424-1 is a Pull-Up Cleat designed to recess flush to the deck when not in use, giving boats a clean, contemporary look instead of a cleat that permanently protrudes above the deck surface. It is investment cast from 316 stainless steel, a marine-grade alloy chosen for its corrosion resistance in saltwater and freshwater environments. The cleat mounts with stud fasteners that are hidden beneath the deck once installed, keeping the topside hardware neat and low-profile.\u003c\/p\u003e\u003cp\u003eThis model is compatible with an optional drain fitting (part number 041594) that can be added for water drainage down to the bilge, and it is compatible with backing plate 041484 to reinforce the mounting point on the underside of the deck; a backing plate is included in the display packaging for this part. The drain fitting itself is sold separately from the cleat. Sea-Dog builds this cleat as part of its S-Style Pull-Up Cleat with Studs line, used for cleating dock lines while preserving a streamlined deck when the cleat is stowed flush.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041424-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e S-Style Pull-Up Cleat with Studs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Stud mounted, hidden fasteners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Size:\u003c\/strong\u003e 6-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.428 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Backing Plate:\u003c\/strong\u003e 041484 (included in display packaging)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Drain Fitting:\u003c\/strong\u003e 041594 (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041614\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal deck mount; no specific make, model, or year fitment is specified for this cleat.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference or replacement part numbers are specified for this item.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 041424-1 used for?\u003c\/strong\u003e It is a pull-up deck cleat used to secure dock lines, designed to recess flush with the deck when not in use for a clean, contemporary appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 041424-1 cleat made from?\u003c\/strong\u003e It is investment cast from 316 stainless steel, a marine-grade alloy that resists corrosion in saltwater and freshwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 041424-1 pull-up cleat come with a backing plate?\u003c\/strong\u003e Yes, a backing plate is included in the display packaging for the Sea-Dog 041424-1; bulk-packed cleats sell the backing plate separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 041424-1 cleat mounted?\u003c\/strong\u003e Stud-mounted fasteners are used, and they remain hidden beneath the deck once the Sea-Dog 041424-1 is installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan water drain through the 041424-1 cleat?\u003c\/strong\u003e Yes, an optional drain fitting, part number 041594, can be added to the 041424-1 to allow water drainage down to the bilge; the drain fitting is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 041424-1 pull-up cleat?\u003c\/strong\u003e The 041424-1 is the 6-1\/2 inch nominal size in Sea-Dog's S-Style Pull-Up Cleat line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 041424-1 cleat weigh?\u003c\/strong\u003e It weighs 1.428 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the drain fitting included with the 041424-1 cleat?\u003c\/strong\u003e No, the drain fitting (part number 041594) is pictured with the cleat but sold separately from the 041424-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes a pull-up cleat different from a standard fixed cleat?\u003c\/strong\u003e Unlike a standard fixed cleat that sits permanently above the deck, the Sea-Dog 041424-1 recesses flush with the deck when not in use, giving a cleaner, more contemporary look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 041424-1 suitable for saltwater use?\u003c\/strong\u003e Yes, its 316 stainless steel construction is a marine-grade alloy suited to saltwater and freshwater marine environments.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543746267,"sku":"S-D-041424-1","price":70.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7464_347ba784-e61e-4206-9b6d-356fd266ba5b.jpg?v=1784421676"},{"product_id":"sea-dog-041636-1-smart-cleat-6-1-4-investment-cast-316-stainless-steel-open-base-deck-cleat","title":"Sea-Dog Smart Cleat 6-1\/4 Inch Investment Cast 316 Stainless Steel Open Base Cleat","description":"\u003cp\u003eThe Sea-Dog Smart Cleat is an open base deck cleat built for tying off dock lines and mooring lines in a classic cleat profile. It is constructed of investment cast 316 stainless steel, giving it strong resistance to marine corrosion and salt water exposure over repeated use. The knob end design on each horn helps keep lines from slipping off the cleat, which reduces the chance of a loose line becoming a trip or collision hazard on deck or at the dock.\u003c\/p\u003e\u003cp\u003eThis is an open base mount cleat, meaning it sits directly on the mounting surface and is secured with four 1\/4 inch flat head fasteners (fasteners are not included and must be purchased separately). The overall footprint measures 6-1\/4 inches, with a base width of 1-5\/8 inches, a height of 2 inches, and a mounting hole spacing of 1-1\/4 inches. At 0.65 pounds, it is sized for standard cleating duty on boats, docks, and swim platforms where a durable, low-maintenance tie-off point is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041636-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Open Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 6-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width (B):\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight (C):\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Spacing (D):\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 1\/4 inch FH (flat head), fasteners not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Required:\u003c\/strong\u003e Four 1\/4 inch FH fasteners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.65 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041744\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog Smart Cleat 041636-1 made of?\u003c\/strong\u003e It is made of investment cast 316 stainless steel, which resists corrosion from salt water and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with this cleat?\u003c\/strong\u003e No, the Sea-Dog Smart Cleat 041636-1 mounts with four 1\/4 inch FH (flat head) fasteners that are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this cleat?\u003c\/strong\u003e The 041636-1 measures 6-1\/4 inches overall (A), with a base width of 1-5\/8 inches (B), a height of 2 inches (C), and a mounting hole spacing of 1-1\/4 inches (D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cleat weigh?\u003c\/strong\u003e The Sea-Dog Smart Cleat 041636-1 weighs 0.65 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a surface mount or through-deck cleat?\u003c\/strong\u003e It is an open base mount cleat, meaning it sits on top of the mounting surface and is secured with four 1\/4 inch FH fasteners rather than requiring a through-deck installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps a line from slipping off the horns of the cleat?\u003c\/strong\u003e The Sea-Dog Smart Cleat 041636-1 has knob ends on the horns that help prevent lines from easily slipping off, reducing the risk of a loose line causing a collision or trip hazard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fasteners does this cleat use?\u003c\/strong\u003e The 041636-1 uses four 1\/4 inch FH (flat head) fasteners for mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cleat come in different sizes?\u003c\/strong\u003e This listing is for the Sea-Dog Smart Cleat part number 041636-1, sized at 6-1\/4 inches overall; other sizes may be offered under different Sea-Dog part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog Smart Cleat suitable for salt water use?\u003c\/strong\u003e Yes, the 041636-1 is constructed of investment cast 316 stainless steel, a grade chosen specifically for its corrosion resistance in marine and salt water conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the shape\/style of this cleat?\u003c\/strong\u003e The Sea-Dog Smart Cleat 041636-1 is a classic-style open base cleat with a traditional horned profile for tying off dock and mooring lines.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543877339,"sku":"S-D-041636-1","price":41.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7314.jpg?v=1784421714"},{"product_id":"sea-dog-055408-1-stainless-steel-rub-strake-8-inch-304-ss-chafe-guard-for-cap-rails-gunwales-dock-lines","title":"Sea-Dog Stamped 304 Stainless Steel Rub Strake, 8 Inch x 3\/4 Inch","description":"\u003cp\u003eThis Sea-Dog Rub Strake is a stamped 304 stainless steel strip designed to protect your boat's dock lines, fenders, and anchor lines from chafing against cap rails, gunwales, and other hard edges. Mounted along the point of contact, the strake creates a smooth, rounded surface so mooring and dock lines glide past instead of wearing against the hull or rail, reducing line wear and preventing scuffing of the boat's finish.\u003c\/p\u003e\u003cp\u003eConstructed of corrosion resistant 304 stainless steel for reliable performance in marine environments, this rub strake measures 8 inches long and 3\/4 inch wide, with a 1\/4 inch profile. It installs using #8 flat head fasteners (fasteners not included), allowing a low-profile, flush-mounted finish along the mounting surface. The 8 inch length is one of several sizes Sea-Dog offers in this rub strake line, making it easy to match strake length to the area needing protection.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 055408-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #8 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.104 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514055024\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the length of this Sea-Dog rub strake?\u003c\/strong\u003e This Sea-Dog Rub Strake (part number 055408-1) measures 8 inches long and 3\/4 inch wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 055408-1 rub strake made from?\u003c\/strong\u003e It is made of stamped 304 stainless steel, which resists corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a rub strake used for?\u003c\/strong\u003e A rub strake protects a boat's dock, fender, and anchor lines from chafing against cap rails, gunwales, and other hard edges by giving the lines a smooth surface to run against.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo fasteners come included with this rub strake?\u003c\/strong\u003e No, the Sea-Dog 055408-1 rub strake installs with #8 flat head fasteners, but the fasteners themselves are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 8 inch rub strake weigh?\u003c\/strong\u003e This rub strake weighs 0.104 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick is the 055408-1 rub strake?\u003c\/strong\u003e The strake has a 1\/4 inch profile thickness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this rub strake only available in the 8 inch length?\u003c\/strong\u003e Sea-Dog offers this rub strake design in multiple lengths; part 055408-1 is the 8 inch version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener size is needed to install this rub strake?\u003c\/strong\u003e The 055408-1 rub strake is designed to install with #8 flat head fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog rub strake corrosion resistant?\u003c\/strong\u003e Yes, it is constructed from 304 stainless steel, which is corrosion resistant for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the rub strake typically mounted on a boat?\u003c\/strong\u003e It is typically mounted along cap rails, gunwales, or other edges where dock, fender, or anchor lines could rub and chafe against the boat.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544663771,"sku":"S-D-055408-1","price":8.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7484.jpg?v=1784421889"},{"product_id":"sea-dog-055412-1-stainless-steel-rub-strake-12-in-x-3-4-in-chafe-guard-for-cap-rails-and-gunwales","title":"Sea-Dog Line Stainless Steel Rub Strake, 12 Inch x 3\/4 Inch, Part 055412-1","description":"\u003cp\u003eThe Sea-Dog Line Rub Strake (part 055412-1) is a 12 inch protective strip designed to guard your boat's dock lines, fender lines, and anchor lines from chafing against cap rails, gunwales, and other hardware edges. Mounted along a rail or edge, the strake creates a smooth, rounded surface so mooring and dock lines glide past instead of wearing against a sharp or textured edge, reducing line wear and the risk of a line failing from abrasion over time.\u003c\/p\u003e\u003cp\u003eThis rub strake is 3\/4 inch wide and constructed of stamped 304 stainless steel, which resists corrosion in saltwater and marine environments while holding up to repeated contact from lines under load. It installs with #8 flat head fasteners (fasteners not included), allowing a low-profile, flush-mounted finish along the rail.\u003c\/p\u003e\u003cp\u003ePart 055412-1 is the 12 inch length in the Sea-Dog Line rub strake series, which is also offered in 8 inch, 18 inch, and 24 inch lengths to match different rail spans and boat sizes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog Line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 055412-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 stainless steel, stamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #8 flat head (fasteners not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.162 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514055048\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog Line rub strake 055412-1 used for?\u003c\/strong\u003e It protects dock lines, fender lines, and anchor lines from chafing against cap rails, gunwales, and similar edges on a boat by giving the line a smooth surface to run against.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is part 055412-1?\u003c\/strong\u003e This rub strake measures 12 inches long and 3\/4 inch wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the rub strake made from?\u003c\/strong\u003e It is made of stamped 304 stainless steel, chosen for its corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with 055412-1?\u003c\/strong\u003e No. The rub strake installs with #8 flat head fasteners, which are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other lengths does this rub strake come in?\u003c\/strong\u003e Besides the 12 inch version (055412-1), Sea-Dog Line offers this rub strake in 8 inch, 18 inch, and 24 inch lengths.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the rub strake corrosion resistant?\u003c\/strong\u003e Yes, the stamped 304 stainless steel construction of part 055412-1 is corrosion resistant, making it suitable for saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 12 inch rub strake weigh?\u003c\/strong\u003e Part 055412-1 weighs 0.162 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this rub strake fit both port and starboard sides?\u003c\/strong\u003e Yes, this rub strake is a straight strip design and is not side-specific, so it can be mounted on either side of the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the rub strake installed?\u003c\/strong\u003e The 12 inch Sea-Dog Line rub strake is mounted with #8 flat head fasteners along a rail or edge where lines contact the boat; fasteners are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog Line 12 inch rub strake?\u003c\/strong\u003e The UPC for part 055412-1 is 035514055048.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544696539,"sku":"S-D-055412-1","price":12.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7484_56a3878d-c755-4492-aa3a-dc3e074839ec.jpg?v=1784421894"},{"product_id":"sea-dog-rub-strake-18-in-304-stainless-steel-chafe-guard-for-dock-fender-and-anchor-lines-3-4-in-wide-mpn-055418-1","title":"Sea-Dog Stainless Steel Rub Strake 18 Inch x 3\/4 Inch, 304 Stainless Steel, Part 055418-1","description":"\u003cp\u003eThe Sea-Dog Rub Strake, part number 055418-1, is an 18 inch stainless steel strip designed to protect your boat's dock lines, fender lines, and anchor lines from chafing against cap rails, gunwales, and other hard edges. Mounted along an exposed rail or edge, the strake creates a smooth, rounded surface that lines can ride against without fraying or wearing through over time, helping extend the life of your dock and mooring lines.\u003c\/p\u003e\u003cp\u003eThis rub strake measures 3\/4 inch wide and is constructed of corrosion resistant stamped 304 stainless steel, giving it long-term durability in a saltwater or freshwater marine environment. It installs with #8 flat head fasteners (not included) using mounting holes spaced 7-1\/2 inches from each end of the strake, with a 1\/4 inch hole diameter. The 18 inch length makes it well suited to longer runs of rail or gunwale where line contact is a concern.\u003c\/p\u003e\u003cp\u003eThis same rub strake design is also available from Sea-Dog in 8 inch, 12 inch, and 24 inch lengths to match different rail and mounting needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 055418-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Spacing (from each end):\u003c\/strong\u003e 7-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #8 flat head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Stamped, corrosion resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.242 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 rub strake\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 055418-1 rub strake used for?\u003c\/strong\u003e It is an 18 inch stainless steel strip that mounts along a boat's cap rail or gunwale to protect dock, fender, and anchor lines from chafing as they run against the edge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this rub strake?\u003c\/strong\u003e The Sea-Dog rub strake part number 055418-1 measures 18 inches long and 3\/4 inch wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 055418-1 rub strake made of?\u003c\/strong\u003e It is made of corrosion resistant stamped 304 stainless steel, suitable for continuous exposure to saltwater and freshwater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the rub strake come with mounting hardware?\u003c\/strong\u003e No, fasteners are not included. The 055418-1 rub strake is designed for #8 flat head fasteners, which must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far apart are the mounting holes?\u003c\/strong\u003e On the 18 inch Sea-Dog rub strake (055418-1), the mounting holes are spaced 7-1\/2 inches from each end, with a 1\/4 inch hole diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this rub strake available in other lengths?\u003c\/strong\u003e Yes, the same Sea-Dog rub strake design is also offered in 8 inch, 12 inch, and 24 inch lengths in addition to this 18 inch version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 055418-1 rub strake weigh?\u003c\/strong\u003e This 18 inch Sea-Dog rub strake weighs 0.242 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should the rub strake be installed on a boat?\u003c\/strong\u003e It is installed along cap rails, gunwales, or other edges where dock, fender, or anchor lines rub against the boat, to prevent chafing and line wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this rub strake rust or corrode?\u003c\/strong\u003e It is built from 304 stainless steel, which resists corrosion in marine environments better than standard steel or painted metal strips.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many rub strakes come in a package?\u003c\/strong\u003e Each 055418-1 listing includes one 18 inch Sea-Dog rub strake.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544729307,"sku":"S-D-055418-1","price":16.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7484_3ec94722-56b9-4b54-925c-6969e0831bb4.jpg?v=1784421903"},{"product_id":"sea-dog-060060-1-skene-chock-4-1-2-in-investment-cast-316-stainless-steel-left-right-pair-for-lines-up-to-3-4-in","title":"Sea-Dog Skene Chock 4-1\/2 Inch, 316 Stainless Steel Bow Chock Pair, 060060-1","description":"\u003cp\u003eThe Sea-Dog 060060-1 Skene Chock is a 4-1\/2 inch mooring and dock line chock built from investment cast 316 stainless steel for long-term corrosion resistance in saltwater and freshwater environments. Skene chocks are designed with tips that overlap, which reduces the likelihood of a mooring or dock line working free of the chock as the boat moves at the dock or on a mooring. The smooth, rounded lead surface minimizes chafing on the line as it passes through under load, helping extend the life of dock lines and mooring lines.\u003c\/p\u003e\u003cp\u003eThis chock accommodates lines up to 3\/4 inch in diameter and is sold as a matched left and right pair, so a single 060060-1 purchase outfits both sides of the bow (or wherever a chock pair is needed). It installs with two flat head fasteners (not included) through the base. The compact 4-1\/2 inch size makes it well suited for smaller to mid-size boats where a full-size hawse or bow chock would be oversized.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 060060-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 4-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 13\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 11\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 3-5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Line Size:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Left and Right Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.23 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for boats requiring a 4-1\/2 inch Skene-style bow or dock line chock; not specific to a make, model, or year.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size dock or mooring line fits the Sea-Dog 060060-1 Skene Chock?\u003c\/strong\u003e The 060060-1 Skene Chock accommodates lines up to 3\/4 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 060060-1 come as a single chock or a pair?\u003c\/strong\u003e It is sold as a matched left and right pair, so one purchase of the 060060-1 outfits both sides.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog Skene Chock made from?\u003c\/strong\u003e It is constructed of investment cast 316 stainless steel, chosen for its resistance to marine corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the mounting dimensions of the 060060-1?\u003c\/strong\u003e The 060060-1 measures 4-1\/2 inches overall (A), with a 13\/16 inch dimension (B), 11\/16 inch dimension (C), and a 3-5\/16 inch base dimension (D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with this chock?\u003c\/strong\u003e No, the 060060-1 installs with two #10 flat head fasteners that are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is a Skene chock different from a straight chock?\u003c\/strong\u003e The Sea-Dog Skene Chock (060060-1) has overlapping tips designed to keep a mooring line from working free, and is sold as a left\/right pair, whereas Sea-Dog's Straight Chocks are sold individually and are typically mounted at the stern or amidships to feed lines to horn-style cleats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the overlapping tip design help hold the mooring line?\u003c\/strong\u003e On the 060060-1 Skene Chock, the tips are designed to overlap, which reduces the chance that boat motion will let the mooring or dock line accidentally work its way free of the chock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 060060-1 Skene Chock weigh?\u003c\/strong\u003e The Sea-Dog 060060-1 weighs 0.23 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this chock hold up in saltwater use?\u003c\/strong\u003e Yes, the 060060-1 is made from investment cast 316 stainless steel, a grade selected specifically for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the standard pack quantity for the 060060-1?\u003c\/strong\u003e The 060060-1 Skene Chock is packed 5 pair to a standard pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere would I typically mount a Skene chock like the 060060-1?\u003c\/strong\u003e Skene chocks such as the 060060-1 are used to provide a smooth lead for mooring or dock lines, with the rounded surface minimizing chafing where the line passes through.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544794843,"sku":"S-D-060060-1","price":40.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7486.jpg?v=1784421917"},{"product_id":"sea-dog-067360-1-nylon-skene-chock-4-1-2-in-left-right-pair-for-mooring-dock-lines-up-to-1-2-in","title":"Sea-Dog Skene Chock 4-1\/2 Inch Nylon, Left and Right Pair, Part 067360-1","description":"\u003cp\u003eThe Sea-Dog Skene Chock (067360-1) provides a smooth, low-friction lead point for mooring and dock lines, reducing chafing where the line passes over the rail or gunwale. Each chock is molded with an overlapping tip design: the raised lip helps keep the line seated in the chock so boat motion is less likely to work the line free during mooring. This listing includes both a left and a right chock, so the pair can be installed symmetrically at the bow or stern.\u003c\/p\u003e\u003cp\u003eThe chocks are constructed of UV stabilized injection molded nylon, which resists cracking, fading, and corrosion from sun and saltwater exposure over time, making them a lightweight, non-marring alternative to metal chocks. They accommodate mooring or dock lines up to 1\/2 inch in diameter. Each chock installs with two #10 flathead fasteners (fasteners are not included) through the mounting holes in the base.\u003c\/p\u003e\u003cp\u003eThis is a general-purpose deck hardware item intended for mooring and docking use and is not tied to a specific engine, drive, or boat model.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 067360-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Skene Chock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV Stabilized Injection Molded Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength (A):\u003c\/strong\u003e 4-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 7\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Capacity (C):\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 3-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 FH (flathead), not included, two required per chock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.176 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 1 pair (left and right chock included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514067034\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size lines does the Sea-Dog Skene Chock 067360-1 fit?\u003c\/strong\u003e This chock accommodates mooring or dock lines up to 1\/2 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this listing include both a left and a right chock?\u003c\/strong\u003e Yes, part 067360-1 is sold as a pair with one left and one right chock included, so both sides of the boat can be fitted at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog Skene Chock made from?\u003c\/strong\u003e It is molded from UV stabilized injection molded nylon, chosen to resist cracking, fading, and corrosion from sun and saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Skene Chock mounted?\u003c\/strong\u003e Each chock installs with two #10 flathead fasteners through the base; the fasteners are not included with part 067360-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 067360-1 Skene Chock?\u003c\/strong\u003e The chock measures 4-1\/2 inches (A) by 7\/16 inch (B), with a 1\/2 inch line opening (C) and a 3-5\/8 inch dimension (D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the chock tip overlap instead of forming a simple open slot?\u003c\/strong\u003e The Sea-Dog Skene Chock design overlaps at the tip so that boat motion is less likely to work the mooring or dock line free of the chock during normal use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog Skene Chock weigh?\u003c\/strong\u003e The 067360-1 pair weighs 0.176 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this chock intended for a specific boat model or engine?\u003c\/strong\u003e No, the Sea-Dog Skene Chock 067360-1 is general-purpose deck hardware for mooring and docking and is not tied to a specific boat model, engine, or drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the nylon construction hold up to sun and saltwater exposure?\u003c\/strong\u003e Yes, the 067360-1 chock is made of UV stabilized nylon specifically to resist degradation from sun and saltwater over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog Skene Chock 067360-1?\u003c\/strong\u003e The UPC for this pair of Skene Chocks is 035514067034.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544893147,"sku":"S-D-067360-1","price":4.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7489.jpg?v=1784421941"},{"product_id":"sea-dog-081261-1-tie-down-eye-strap-304-stainless-steel-3-8in-i-d-for-1in-webbing","title":"Sea-Dog Stainless Steel Tie Down Eye Strap, 3\/8 Inch x 1-1\/16 Inch, for 1 Inch Webbing","description":"\u003cp\u003eThe Sea-Dog Tie Down Eye Strap (081261-1) is a forged 304 stainless steel eye strap designed to secure batteries, fuel tanks, ice chests, life rafts, dinghies, and similar gear aboard a boat. Its flat, low profile design keeps the strap out of the way while providing a strong, corrosion resistant tie down point on deck or in a hatch or locker.\u003c\/p\u003e\u003cp\u003eThis size is built to work with 1 inch webbing, making it a straightforward match for standard tie down straps used to hold down batteries and other onboard equipment. The eye strap is constructed of forged 304 stainless steel, giving it durability and resistance to corrosion in a marine environment. It installs with two #10 flat head fasteners (not included), allowing for a secure, low-profile mount to a deck, hull liner, or other flat surface.\u003c\/p\u003e\u003cp\u003eSea-Dog also offers this eye strap in two other webbing widths under separate part numbers, so boaters with wider straps can order the correct size for their application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 081261-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Tie Down Eye Strap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Forged 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye Strap Inner Width (A):\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye Strap Inner Length (B):\u003c\/strong\u003e 1-1\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (C):\u003c\/strong\u003e 2-1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Width (D):\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 flat head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.128 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWebbing Compatibility:\u003c\/strong\u003e 1 inch webbing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5.81 x 3.88 x 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514081375\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each \/ 10 pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size webbing does the Sea-Dog 081261-1 tie down eye strap fit?\u003c\/strong\u003e The Sea-Dog 081261-1 is sized for 1 inch webbing, making it a match for standard tie down straps used to secure batteries, fuel tanks, and other onboard gear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the eye strap made of?\u003c\/strong\u003e It is constructed of forged 304 stainless steel, giving the 081261-1 eye strap corrosion resistance suitable for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 081261-1 eye strap?\u003c\/strong\u003e The 081261-1 measures 3\/8 inch across the inner width (A), 1-1\/16 inch inner length (B), 2-1\/8 inch overall length (C), and 5\/16 inch strap width (D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with this eye strap?\u003c\/strong\u003e No, the 081261-1 installs with two #10 flat head fasteners that are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this eye strap commonly used for?\u003c\/strong\u003e Sea-Dog tie down eye straps like the 081261-1 are commonly used to hold down batteries, fuel tanks, ice chests, life rafts, dinghies, and similar equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 081261-1 eye strap weigh?\u003c\/strong\u003e The Sea-Dog 081261-1 tie down eye strap weighs 0.128 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 081261-1 eye strap corrosion resistant?\u003c\/strong\u003e Yes, it is made of forged 304 stainless steel, which resists corrosion in saltwater and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 081261-1 and Sea-Dog's other eye strap sizes?\u003c\/strong\u003e The 081261-1 is sized for 1 inch webbing, while Sea-Dog also offers this eye strap for 2 inch webbing (081262-1) and 1-3\/8 inch webbing (081265-1) under separate part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 081261-1 have a low profile design?\u003c\/strong\u003e Yes, the Sea-Dog 081261-1 has a flat, low profile design that keeps it out of the way once installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does the 081261-1 eye strap have?\u003c\/strong\u003e The 081261-1 has a silver, natural stainless steel finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 081261-1 eye strap packaged?\u003c\/strong\u003e The 081261-1 is available in a standard pack of 10 each or 10 pair.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988545188059,"sku":"S-D-081261-1","price":7.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8014.jpg?v=1784421992"},{"product_id":"sea-dog-081262-1-tie-down-eye-strap-forged-304-stainless-steel-for-2-inch-webbing-sold-by-the-pair","title":"Sea-Dog 081262-1 Forged Stainless Steel Tie Down Eye Strap for 2 Inch Webbing","description":"\u003cp\u003eThe Sea-Dog 081262-1 Tie Down Eye Strap is a low-profile deck fitting designed to secure batteries, fuel tanks, ice chests, life rafts, and dinghies aboard a boat using 2 inch webbing. Forged from corrosion-resistant 304 stainless steel, it stands up to saltwater exposure and repeated tension without corroding or weakening, making it a durable choice for hardware that stays exposed to the elements. Its flat, low profile keeps the strap seated close to the deck or mounting surface, reducing snag points while still providing a solid anchor point for tie-down webbing.\u003c\/p\u003e\u003cp\u003eThe eye strap is designed for 2 inch webbing, distinguishing it from the narrower 1 inch and 1-3\/8 inch versions Sea-Dog offers in the same forged stainless steel line. It installs with two #10 flat head fasteners (sold separately) through its mounting base. Sold per pair, this eye strap suits boat owners securing loose gear, safety equipment, or storage containers that need to stay put in rough water.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 081262-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Forged 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWebbing Width Compatibility:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 3-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 flat head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.184 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each \/ 10 pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514081405\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSized for 2 inch tie down webbing straps\u003c\/li\u003e\n\u003cli\u003eUniversal deck mount application; not vehicle- or engine-specific\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat webbing width does the Sea-Dog 081262-1 eye strap fit?\u003c\/strong\u003e This eye strap is sized for 2 inch webbing. Sea-Dog also makes the 081261-1 for 1 inch webbing and the 081265-1 for 1-3\/8 inch webbing, so match the strap to your webbing width before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 081262-1 tie down eye strap made of?\u003c\/strong\u003e It is made of forged 304 stainless steel, which resists corrosion in saltwater and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in an order of the 081262-1?\u003c\/strong\u003e The Sea-Dog 081262-1 tie down eye strap is sold per pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 081262-1 eye strap weigh?\u003c\/strong\u003e It weighs 0.184 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install the 081262-1?\u003c\/strong\u003e Installation requires two #10 flat head fasteners, which are not included with the eye strap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this eye strap typically used for?\u003c\/strong\u003e Boat owners use the Sea-Dog 081262-1 to hold down batteries, fuel tanks, ice chests, life rafts, and dinghies with 2 inch tie down webbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 081262-1 eye strap?\u003c\/strong\u003e Per Sea-Dog's specifications, the 081262-1 measures 3\/8 inch (A), 2 inches (B, the webbing width), 3-1\/8 inches (C), and 1\/4 inch (D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 081262-1 have a low profile design?\u003c\/strong\u003e Yes, the Sea-Dog 081262-1 has a flat, low profile that keeps it close to the mounting surface and reduces snag points on deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 081262-1 eye strap resistant to rust?\u003c\/strong\u003e Yes, because it is forged from 304 stainless steel, the 081262-1 resists corrosion from saltwater and marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 081262-1 and 081265-1 eye straps?\u003c\/strong\u003e The 081262-1 is sized for 2 inch webbing, while the 081265-1 is the same forged stainless steel eye strap sized for narrower 1-3\/8 inch webbing; they are different SKUs so order the one matching your webbing width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the standard pack quantity for the 081262-1?\u003c\/strong\u003e Sea-Dog packs the 081262-1 in standard packs of 10 each or 10 pair.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988545417435,"sku":"S-D-081262-1","price":9.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8014_43148e26-1fc6-4141-8ba2-95d9e462b1a8.jpg?v=1784422017"},{"product_id":"sea-dog-193415-1-quick-release-pin-1-4-x-1-1-2-formed-304-stainless-steel-detent-ball-pin-for-anchor-clevis-and-hinge-pins-sold-per-pair","title":"Sea-Dog Release Pin 1\/4 Inch x 1-1\/2 Inch, 304 Stainless Steel, Sold in Pairs","description":"\u003cp\u003eThis Sea-Dog release pin is a standard duty detent pin sized 1\/4 inch by 1-1\/2 inch, made from formed 304 stainless steel for corrosion resistance in marine environments. It is designed for basic holding and removal applications that do not require a positive locking ball feature, and is activated with a simple push or pull motion. A spring-loaded detent ball depresses on insertion and springs back up to hold the pin in place, allowing quick release when needed. The robust, durable design suits repetitive-use applications where a part needs to be removed and reinserted often.\u003c\/p\u003e\u003cp\u003eTypical uses include anchor clevis fittings, hinge pins, and as a replacement for cotter pins in spots where frequent removal is required, such as bimini top and deck hardware. Each pin includes a split ring so an optional lanyard can be attached to prevent loss overboard. This pin is sold as a pair. Note that the deck hinge shown in reference imagery is a separate component and is not included with this pin.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 193415-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Diameter:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Pin Length:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Dimension C:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Dimension D:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRing Diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.062 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Sold as a pair (2 pieces)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Split ring for lanyard attachment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 193415-1 release pin?\u003c\/strong\u003e The 193415-1 measures 1\/4 inch in pin diameter by 1-1\/2 inches in overall pin length, with a 1 inch diameter ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this release pin made from?\u003c\/strong\u003e It is made from formed 304 stainless steel, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pin have a locking ball feature?\u003c\/strong\u003e No, this is a standard duty detent pin without a positive locking ball feature. The detent ball simply depresses and springs back for quick release, so it is meant for basic holding and removal, not high-security locking applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pins come in a package?\u003c\/strong\u003e The Sea-Dog 193415-1 is sold as a pair, so each package contains 2 release pins.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this release pin typically used for?\u003c\/strong\u003e Common uses include anchor clevis fittings, hinge pins, and as a replacement for cotter pins in locations where the pin needs to be removed frequently.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I attach a lanyard to this pin?\u003c\/strong\u003e Yes, the 193415-1 includes a split ring specifically for attaching an optional lanyard, which helps prevent the pin from being lost overboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the deck hinge included with this pin?\u003c\/strong\u003e No, the deck hinge sometimes shown alongside this pin in reference images is a separate part and is not included with the 193415-1 release pin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this pin operated?\u003c\/strong\u003e It is activated by a simple push or pull motion; the spring-loaded detent ball depresses during insertion and springs back up to hold the pin in place for quick release.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pin suitable for repeated use?\u003c\/strong\u003e Yes, the robust formed stainless steel construction of the 193415-1 is designed for repetitive-use applications where the pin is regularly inserted and removed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this release pin weigh?\u003c\/strong\u003e The Sea-Dog 193415-1 weighs 0.062 pounds.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988548169947,"sku":"S-D-193415-1","price":5.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7722.jpg?v=1784422327"},{"product_id":"sea-dog-193410-1-release-pin-1-4-x-1-304-stainless-steel-quick-release-detent-pin-with-split-ring","title":"Sea-Dog Release Pin 1\/4 Inch x 1 Inch, 304 Stainless Steel Detent Quick Release Pin","description":"\u003cp\u003eThe Sea-Dog 193410-1 is a standard duty detent release pin built from formed 304 stainless steel for corrosion resistance in marine environments. It is designed for basic holding and removal applications that do not require a positive locking ball feature, activated by a simple push or pull motion. The internal detent ball depresses on insertion and springs back up once through the mounting hole, giving a fast, tool-free release when the pin needs to come out.\u003c\/p\u003e\u003cp\u003eThis robust, durable design holds up to repetitive-use applications, making it a common choice for anchor clevis fittings, hinge pins, and as a replacement for cotter pins in spots where the pin has to be pulled and reinserted frequently, such as bimini top and deck hinge hardware. A split ring is included on the pin so an optional lanyard can be attached to keep the pin from being lost overboard. Note that the deck hinge itself is not included; this listing is for the release pin only.\u003c\/p\u003e\u003cp\u003eThe 193410-1 measures 1\/4 inch in pin diameter (A), 1 inch overall length (B), 3\/4 inch useable\/working length (C), 7\/16 inch handle length (D), and 1 inch across the ring (E). It is part of Sea-Dog's standard duty release pin lineup and is sized for smaller-diameter hinge and clevis applications compared to the larger pins in the same series.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 193410-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Standard duty detent release pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Formed 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Diameter (A):\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (B):\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUseable Length (C):\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Length (D):\u003c\/strong\u003e 7\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRing Diameter (E):\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.048 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514193016\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Split ring for lanyard attachment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pin diameter on the Sea-Dog 193410-1 release pin?\u003c\/strong\u003e The pin diameter is 1\/4 inch, with an overall length of 1 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this release pin have a positive locking ball feature?\u003c\/strong\u003e No. The Sea-Dog 193410-1 is a standard duty detent pin, not a positive locking pin, so it is meant for basic holding and removal rather than applications that need a locked-in-place ball detent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the release mechanism work?\u003c\/strong\u003e The 193410-1 is activated by a push or pull motion. Its detent ball depresses as the pin is inserted and springs back up once it clears the hole, allowing a quick, tool-free release.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this pin made of?\u003c\/strong\u003e It is made of formed 304 stainless steel, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this pin be used to replace a cotter pin?\u003c\/strong\u003e Yes. Sea-Dog markets the 193410-1 as suitable for replacing cotter pins in applications where the pin needs to be removed frequently, since it releases without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a lanyard included with the 193410-1?\u003c\/strong\u003e A split ring is included on the pin for attaching an optional lanyard, though the lanyard itself is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the deck hinge included with this pin?\u003c\/strong\u003e No, the deck hinge is not included. The 193410-1 listing covers the release pin only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the useable or working length of this pin?\u003c\/strong\u003e The useable length (dimension C) of the 193410-1 is 3\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is this release pin designed for?\u003c\/strong\u003e Common uses include anchor clevis fittings, hinge pins, and other repetitive-use marine hardware applications where a quick, tool-free release is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 193410-1 weigh?\u003c\/strong\u003e It weighs 0.048 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pin suitable for repetitive, everyday use?\u003c\/strong\u003e Yes, the 193410-1 is built with a robust, durable design intended for repetitive-use applications rather than occasional use only.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988548202715,"sku":"S-D-193410-1","price":4.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7722_321caa14-eb77-430c-a29c-ac154e4dd60e.jpg?v=1784422329"},{"product_id":"sea-dog-201030-1-marine-door-hinge-2-3-4-stamped-304-stainless-steel-pair","title":"Sea-Dog Stainless Steel Door Hinge, 2-3\/4 Inch, 201030-1","description":"\u003cp\u003eThe Sea-Dog Door Hinge 201030-1 is a stamped 304 stainless steel hinge built for cabin and cabinet doors aboard boats and other marine applications where corrosion resistance is essential. Constructed from 304 stainless steel, it stands up to saltwater exposure, humidity, and repeated use without rusting or pitting, making it a durable choice for interior and exterior door installations on a boat.\u003c\/p\u003e\u003cp\u003eThis hinge measures 2-3\/4 inches across dimension A, with a 1-3\/8 inch B and C measurement, a 1-1\/2 inch D measurement, and a 1\/16 inch E (leaf thickness) dimension. It installs with six #8 flat head fasteners (not included), allowing a clean, flush mount to the door and jamb surfaces. The hinge is sold as a matched pair, giving boat owners and builders a consistent, corrosion-resistant hardware set for a single door installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 201030-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Door Hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Stamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 1\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #8 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Required:\u003c\/strong\u003e Six #8 FH fasteners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514201742\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 201030-1 door hinge made of?\u003c\/strong\u003e It is made of stamped 304 stainless steel, chosen for its resistance to corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this door hinge?\u003c\/strong\u003e The Sea-Dog 201030-1 measures 2-3\/4 inches across dimension A, 1-3\/8 inches for both the B and C measurements, 1-1\/2 inches for dimension D, and 1\/16 inch for dimension E.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 201030-1 hinge come with mounting screws?\u003c\/strong\u003e No, fasteners are not included. The Sea-Dog 201030-1 installs with six #8 flat head fasteners that must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hinge sold individually or as a pair?\u003c\/strong\u003e The Sea-Dog 201030-1 is sold as a matched pair, providing both hinges needed for a single door installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this door hinge weigh?\u003c\/strong\u003e The Sea-Dog 201030-1 door hinge weighs 0.16 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hinge rust in a saltwater environment?\u003c\/strong\u003e No. Because the Sea-Dog 201030-1 is stamped from 304 stainless steel, it resists corrosion from saltwater and humidity, which is why it is designed specifically for marine cabin and cabinet doors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fasteners are needed to install this hinge?\u003c\/strong\u003e Six #8 flat head fasteners are required to install the Sea-Dog 201030-1 door hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The UPC for the Sea-Dog 201030-1 door hinge is 035514201742.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hinge be used for cabinet doors as well as cabin doors?\u003c\/strong\u003e Yes, the Sea-Dog 201030-1 stainless steel door hinge is suited for cabin and cabinet door applications aboard a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 201030-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, 201030-1 is the manufacturer part number assigned by Sea-Dog to this stainless steel door hinge.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988548235483,"sku":"S-D-201030-1","price":15.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7733.jpg?v=1784422335"},{"product_id":"sea-dog-201071-1-stainless-steel-butt-hinge-1-1-2-in-x-2-in-304-ss-sold-as-pair","title":"Sea-Dog Stainless Steel Butt Hinge 201071-1, 1-1\/2 x 2 Inch, Sold as Pair","description":"\u003cp\u003eThe Sea-Dog 201071-1 is a stamped 304 stainless steel butt hinge made for doors, hatches, cabinets, and lockers where a corrosion resistant, flush-mounted hinge is required. Each unit consists of two rectangular leaves that attach to the abutting surfaces of a door and its jamb, with a barrel connecting the leaves along a 1\/16 inch thick pin joint. The hinge is designed to be mortised into the surrounding surface so the leaves sit flush once installed, giving a clean finished look rather than a hinge that stands proud of the door face.\u003c\/p\u003e\u003cp\u003eConstruction is stamped 304 stainless steel, chosen for its resistance to corrosion in marine and high-moisture environments. The leaves measure 1-1\/2 inches by 3\/4 inches and 3\/4 inches by 2 inches with a 1\/16 inch leaf thickness, and the hinge mounts using four #8 FH (flat head) fasteners, which are not included. This hinge is sold as a matched pair (two hinges per unit), which is the standard configuration for supporting a single door or hatch. It is a general-purpose hardware item suited to boat cabinetry, lockers, hatches, and interior doors wherever a compact, corrosion resistant butt hinge is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 201071-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Butt Hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaf Dimension A:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaf Dimension B:\u003c\/strong\u003e 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaf Dimension C:\u003c\/strong\u003e 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaf Dimension D:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaf Thickness (E):\u003c\/strong\u003e 1\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #8 FH (flat head), not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Required:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.138 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair (2 hinges)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 pairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unfinished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Door Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514201889\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 201071-1 hinge used for?\u003c\/strong\u003e It is a butt hinge for mounting doors, hatches, cabinets, or lockers, with two leaves that attach to the abutting surfaces of a door and its jamb and mortise in for a flush installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this hinge?\u003c\/strong\u003e The 201071-1 leaves measure 1-1\/2 inches by 3\/4 inches and 3\/4 inches by 2 inches, with a 1\/16 inch leaf thickness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 201071-1 hinge made from?\u003c\/strong\u003e Stamped 304 stainless steel, chosen for corrosion resistance in marine and high-moisture environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 201071-1 come with mounting screws?\u003c\/strong\u003e No, fasteners are not included. It installs with four #8 FH (flat head) screws that must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 201071-1 sold as a single hinge or a pair?\u003c\/strong\u003e It is sold as a pair, two matching hinges per unit, which is the standard configuration for supporting one door or hatch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 201071-1 hinge weigh?\u003c\/strong\u003e The pair weighs 0.138 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hinge hold up in a marine environment?\u003c\/strong\u003e Yes, the 201071-1 is made of stamped 304 stainless steel, which resists corrosion in saltwater and humid conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 201071-1 need to be mortised into the door?\u003c\/strong\u003e Yes, it is designed to be mortised for a flush installation so the leaves sit level with the surrounding surface rather than standing proud.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 201071-1 different from Sea-Dog's other butt hinge sizes?\u003c\/strong\u003e The 201071-1 has 1-1\/2 by 3\/4 inch and 3\/4 by 2 inch leaves; Sea-Dog offers this same style of hinge in other leaf sizes under different part numbers, so check your opening dimensions before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 201071-1 have?\u003c\/strong\u003e It has an unfinished stainless steel finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 201071-1 be used on cabinets as well as doors?\u003c\/strong\u003e Yes, this door-mount butt hinge is suitable for cabinets, lockers, hatches, and interior doors in addition to standard doors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick is the leaf on the 201071-1 hinge?\u003c\/strong\u003e The leaf thickness is 1\/16 inch.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988548301019,"sku":"S-D-201071-1","price":13.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7619.jpg?v=1784422343"},{"product_id":"sea-dog-201136-1-strap-hinge-6-1-8-stamped-304-stainless-steel-sold-in-pairs","title":"Sea-Dog Stainless Steel Strap Hinge, 6-1\/8 Inch, Part 201136-1, Sold as Pair","description":"\u003cp\u003eThe Sea-Dog 201136-1 Strap Hinge is a surface-mount hinge built from stamped 304 stainless steel, designed for marine and outdoor hardware applications that see frequent use. Its design consists of two long, narrow leaves extending from a single knuckle, a shape that is commonly used for dock box lids, fish holds, hatch covers, and other storage compartments that need a durable, corrosion-resistant hinge exposed to the elements. The 304 stainless steel construction resists rust and saltwater corrosion, making it well suited to onboard use as well as dockside storage boxes and outdoor cabinetry.\u003c\/p\u003e\u003cp\u003eThis hinge measures 6-1\/8 inches in overall length, with each leaf measuring 3-1\/16 inches, a width of 1-1\/8 inches, and a thickness of 1\/8 inch. It installs using #8 flat head fasteners, which are not included, and is sold as a matched pair for a single hinged application. Sea-Dog also offers this same strap hinge style in a shorter 4 inch length (201134-1) for smaller lids and compartments where the full 6-1\/8 inch size is too large.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 201136-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 6-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaf Width (B):\u003c\/strong\u003e 3-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaf Width (C):\u003c\/strong\u003e 3-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth (D):\u003c\/strong\u003e 1-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (E):\u003c\/strong\u003e 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #8 Flat Head (fasteners not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.252 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair (2 hinges)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal surface-mount strap hinge and is not restricted to a specific boat make or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 201136-1 strap hinge used for?\u003c\/strong\u003e It is a surface-mount strap hinge commonly used for dock box lids, fish holds, and similar storage compartments that need a durable, frequently-used hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 201136-1 hinge made from?\u003c\/strong\u003e It is made from stamped 304 stainless steel, which resists corrosion in outdoor and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this strap hinge?\u003c\/strong\u003e The overall length is 6-1\/8 inches, with each leaf measuring 3-1\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow wide and thick is the 201136-1 hinge?\u003c\/strong\u003e The hinge is 1-1\/8 inches wide and 1\/8 inch thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 201136-1 come as a single hinge or a pair?\u003c\/strong\u003e The 201136-1 is sold as a pair, so you receive two matching hinges per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install this hinge?\u003c\/strong\u003e It installs with #8 flat head fasteners, which are not included with the hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 201136-1 strap hinge weigh?\u003c\/strong\u003e Each pair weighs 0.252 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hinge suitable for outdoor or saltwater use?\u003c\/strong\u003e Yes, the 304 stainless steel construction is corrosion resistant, making the 201136-1 suitable for outdoor and marine applications that see frequent use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a smaller version of this Sea-Dog strap hinge?\u003c\/strong\u003e Yes, Sea-Dog also makes a 4 inch strap hinge, part number 201134-1, for smaller lids and compartments, though it is a separate SKU from the 6-1\/8 inch 201136-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 201136-1 hinge fit a specific boat make or model?\u003c\/strong\u003e No, this is a universal surface-mount hinge and is not limited to a particular boat make or model.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988548333787,"sku":"S-D-201136-1","price":13.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7071.jpg?v=1784422363"},{"product_id":"sea-dog-201134-1-strap-hinge-304-stainless-steel-4-x-1-1-8-for-dock-box-lids-fish-holds-and-hatches","title":"Sea-Dog Strap Hinge, 4 Inch 304 Stainless Steel Surface Mount, Part 201134-1","description":"\u003cp\u003eThe Sea-Dog Strap Hinge (part 201134-1) is a stamped 304 stainless steel hinge built for surface-mounting applications where hardware is exposed to the elements. It consists of two long, narrow leaves extending from a single knuckle, a design that spreads mounting screws over a longer span for a stronger hold on lids and panels that see frequent use. This hinge is commonly used for dock box lids, fish holds, and similar outdoor marine storage where corrosion resistance and repeated opening and closing are everyday requirements.\u003c\/p\u003e\u003cp\u003eConstructed from corrosion resistant stamped 304 stainless steel, this strap hinge holds up to saltwater spray, sun, and general marine exposure better than painted or plated steel alternatives. It installs with #8 flat head fasteners, which are not included, so any standard #8 FH screw compatible with the mounting surface will work. Overall length is 4 inches, with each leaf measuring 2 inches wide, a 1-1\/8 inch knuckle diameter, and 1\/8 inch material thickness, giving it a compact footprint suited to dock boxes, hatch lids, and storage compartments. It is sold in packs of 10 hinges (10 pairs).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 201134-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Strap Hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unfinished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaf Width (B):\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaf Width (C):\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKnuckle Diameter (D):\u003c\/strong\u003e 1-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Thickness (E):\u003c\/strong\u003e 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #8 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.172 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 10 each \/ 10 pairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514201018\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Sea-Dog part 201134-1?\u003c\/strong\u003e Part 201134-1 is a Sea-Dog strap hinge made of stamped 304 stainless steel, consisting of two long narrow leaves extending from a single knuckle for surface mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this strap hinge?\u003c\/strong\u003e The 201134-1 strap hinge measures 4 inches overall, with each leaf 2 inches wide, a knuckle diameter of 1-1\/8 inches, and a material thickness of 1\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog strap hinge made from?\u003c\/strong\u003e It is made from stamped 304 stainless steel, chosen for its corrosion resistance in marine and outdoor environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre fasteners included with this hinge?\u003c\/strong\u003e No, fasteners are not included with the 201134-1 strap hinge; it installs with #8 flat head screws that must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this strap hinge weigh?\u003c\/strong\u003e The Sea-Dog strap hinge, part 201134-1, weighs 0.172 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this hinge typically used for?\u003c\/strong\u003e This strap hinge is commonly used for surface mounting dock box lids, fish holds, and similar outdoor marine storage applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hinge suitable for outdoor or marine use?\u003c\/strong\u003e Yes, the 304 stainless steel construction of the 201134-1 strap hinge is corrosion resistant and designed for outdoor applications where the hinge will be in frequent use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hinges come in a pack?\u003c\/strong\u003e The 201134-1 strap hinge is sold in a standard pack of 10 each, or 10 pairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this hinge and Sea-Dog part 201136-1?\u003c\/strong\u003e Part 201134-1 measures 4 inches overall with 2 inch wide leaves, while the related 201136-1 strap hinge is larger, measuring 6-1\/8 inches overall with 3-1\/16 inch wide leaves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener size does this hinge require?\u003c\/strong\u003e The 201134-1 strap hinge is designed to install with #8 flat head fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a mortise hinge or a surface mount hinge?\u003c\/strong\u003e The Sea-Dog 201134-1 is a surface mount strap hinge, not a mortise hinge, making it suited for lids and panels where it mounts directly to the surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 201134-1 strap hinge have?\u003c\/strong\u003e This strap hinge has an unfinished stainless steel finish.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988548366555,"sku":"S-D-201134-1","price":10.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7071_807ee6d0-0871-4880-8bbd-157d5beaf1c1.jpg?v=1784422364"},{"product_id":"sea-dog-201072-1-stainless-steel-butt-hinge-2-x-2-mortise-mount-304-ss-marine-cabinet-door-hinge-sold-per-pair","title":"Sea-Dog 201072-1 Stainless Steel Butt Hinge, 2 Inch, Sold Per Pair","description":"\u003cp\u003eThe Sea-Dog 201072-1 is a 2 inch butt hinge built from stamped 304 stainless steel for corrosion resistance in marine environments. It consists of two rectangular leaves that attach to the abutting surfaces of a door and door jamb, and is sold per pair for a matched, symmetrical installation. The hinge is designed to be mortised into the surrounding surface for a flush, low-profile installation rather than sitting proud of the door and jamb. It installs using four #8 flat head fasteners, which are not included and must be purchased separately. This 2 inch size is the largest of the Sea-Dog stamped butt hinge lineup that also includes 1-1\/4 inch and 1-1\/2 inch versions, making it suited for larger cabinet doors, lockers, and access panels on boats where a sturdier hinge leaf is needed. The stamped stainless construction resists rust and pitting from saltwater exposure while keeping the hinge lightweight. Each hinge weighs 0.186 pounds. With an unfinished stainless finish and face mount orientation, it is intended as a functional, corrosion-resistant hardware component for onboard cabinetry, doors, and hatches.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 201072-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Butt Hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 1\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 2 inches L x 2 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #8 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.186 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Face Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unfinished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each \/ 10 pairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 201072-1 butt hinge?\u003c\/strong\u003e The 201072-1 is the 2 inch size in Sea-Dog's stamped butt hinge line, with a leaf height of 2 inches, leaf width of 1 inch, and an open width of 2 inches when mounted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 201072-1 hinge made from?\u003c\/strong\u003e It is constructed of stamped 304 stainless steel, chosen for its corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hinges are included in one package?\u003c\/strong\u003e The Sea-Dog 201072-1 is sold per pair, so one package contains two matching 2 inch butt hinges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with this hinge?\u003c\/strong\u003e No. The 201072-1 installs with four #8 flat head fasteners per hinge, and those fasteners are not included in the package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a surface-mount or mortised hinge?\u003c\/strong\u003e The 201072-1 butt hinge is designed to be mortised into the door and jamb for a flush installation rather than mounted on the surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 201072-1 hinge weigh?\u003c\/strong\u003e Each Sea-Dog 201072-1 butt hinge weighs 0.186 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hinge hold up to saltwater exposure?\u003c\/strong\u003e Yes, the stamped 304 stainless steel construction of the 201072-1 resists corrosion and pitting from saltwater and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 201072-1 hinge have?\u003c\/strong\u003e It has an unfinished stainless steel finish, showing the natural stamped 304 stainless surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 201072-1 differ from the smaller Sea-Dog butt hinges?\u003c\/strong\u003e The 201072-1 is the 2 inch version; Sea-Dog also offers a 1-1\/4 inch hinge (201070-1) and a 1-1\/2 inch hinge (201071-1) in the same stamped 304 stainless steel design, so the 201072-1 provides a larger leaf for bigger doors and cabinets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mounting type for this hinge?\u003c\/strong\u003e The Sea-Dog 201072-1 is a face mount hinge, with its two leaves attaching to the abutting surfaces of a door and door jamb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the knuckle thickness of the 201072-1 hinge?\u003c\/strong\u003e The hinge knuckle dimension (E) measures 1\/16 inch on the 201072-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is the 201072-1 butt hinge suited for?\u003c\/strong\u003e This 2 inch stamped stainless hinge is sized for cabinet doors, lockers, and access panels where a mortised, flush-mounted hinge pair is needed.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988548399323,"sku":"S-D-201072-1","price":14.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7619_b717af99-18d0-4b53-97cc-318d62a38aaf.jpg?v=1784422370"},{"product_id":"sea-dog-201510-1-short-side-door-hinge-304-stainless-steel-2-1-8-in-x-1-7-16-in-pair","title":"Sea-Dog Short Side Door Hinge 201510-1, Stamped 304 Stainless Steel, 2-1\/8 Inch, Sold as a Pair","description":"\u003cp\u003eThe Sea-Dog Short Side Door Hinge, part number 201510-1, is a compact stainless steel hinge built for boat and marine interior and exterior installations where mounting space is tight. It is stamped from corrosion resistant 304 stainless steel, giving it the durability to hold up in a marine environment while resisting rust and corrosion over repeated exposure to moisture and salt air. The compact \"short side\" profile makes it a good fit for cabinets, hatches, folding tables, and seats where a full-size hinge will not fit the available space.\u003c\/p\u003e\u003cp\u003eEach hinge measures 2-1\/8 inches in overall length, with a leaf width of 11\/16 inch, additional leaf dimensions of 1-7\/16 inches and 1-1\/2 inches, and a knuckle thickness of 1\/16 inch. It installs with five #8 flat head fasteners (fasteners are not included) and uses a non-removable pin for added security once installed. The hinge is sold as a pair, so buyers receive two matching hinges per package.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 201510-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Short Side Door Hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Stamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (Length):\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 11\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E (Thickness):\u003c\/strong\u003e 1\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #8 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Required:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Type:\u003c\/strong\u003e Non-removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.204 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Sold as a pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514201049\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 201510-1 Short Side Door Hinge made of?\u003c\/strong\u003e The 201510-1 hinge is stamped from 304 stainless steel, which resists corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 201510-1 hinge?\u003c\/strong\u003e This Short Side Door Hinge measures 2-1\/8 inches in length, with additional leaf measurements of 11\/16 inch, 1-7\/16 inches, and 1-1\/2 inches, and a knuckle thickness of 1\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fasteners does the Sea-Dog 201510-1 hinge require?\u003c\/strong\u003e Five #8 flat head fasteners are needed to install each 201510-1 Short Side Door Hinge; the fasteners are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog Short Side Door Hinge sold individually or in pairs?\u003c\/strong\u003e The 201510-1 Short Side Door Hinge is sold as a pair, so each package contains two matching hinges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is the 201510-1 hinge suited to?\u003c\/strong\u003e This hinge works well for interior and exterior boat applications such as cabinets, hatches, folding tables, and seats where mounting space is tight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 201510-1 Door Hinge weigh?\u003c\/strong\u003e The 201510-1 Short Side Door Hinge weighs 0.204 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 201510-1 hinge be used outdoors on a boat?\u003c\/strong\u003e Yes, the 304 stainless steel construction of the 201510-1 hinge is corrosion resistant and suitable for both interior and exterior marine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 201510-1 Door Hinge?\u003c\/strong\u003e The UPC for the 201510-1 Short Side Door Hinge is 035514201049.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 201510-1 Short Side Door Hinge differ from Sea-Dog's standard Door Hinge?\u003c\/strong\u003e The 201510-1 Short Side Door Hinge measures 2-1\/8 inches, which is smaller than Sea-Dog's standard Door Hinge (201530-1) at 2-7\/8 inches, making the 201510-1 a better fit where mounting space is limited.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the pin on the 201510-1 hinge come out?\u003c\/strong\u003e No, the pin on the 201510-1 Short Side Door Hinge is non-removable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre fasteners included with the Sea-Dog 201510-1 hinge?\u003c\/strong\u003e No, fasteners are not included with the 201510-1 Short Side Door Hinge; it requires five #8 flat head fasteners purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Sea-Dog 201510-1 hinge have?\u003c\/strong\u003e The 201510-1 Short Side Door Hinge has a stamped 304 stainless steel finish.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988548432091,"sku":"S-D-201510-1","price":14.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7072.jpg?v=1784422374"},{"product_id":"sea-dog-201530-1-stainless-steel-door-hinge-304-ss-2-7-8-x-1-1-2-pair","title":"Sea-Dog Door Hinge 201530-1, Stamped 304 Stainless Steel, 2-7\/8 Inch x 1-1\/2 Inch, Pair","description":"\u003cp\u003eThe Sea-Dog Door Hinge, part number 201530-1, is a stamped 304 stainless steel hinge built to withstand the harsh marine environment. Corrosion resistant stainless steel construction makes it suitable for exterior cabinet doors, lockers, hatches, and other marine door applications exposed to salt air and moisture. The hinge measures 2-7\/8 inches in the A dimension, with 1-7\/16 inches on both the B and C dimensions, a D dimension of 1-1\/2 inches, and a leaf thickness of 1\/16 inch. It installs with six #8 flat head fasteners, which are not included, and is sold as a pair. This part is offered as part of Sea-Dog's stamped stainless steel door hinge line, giving boat owners and builders a consistent, corrosion resistant hardware option for door and cabinet applications throughout a vessel. The stainless construction resists rust and pitting better than plated steel alternatives, making it a long-term hardware solution for boats, RVs, and other marine or outdoor equipment where doors and cabinet fronts are regularly exposed to moisture.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 201530-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Door Hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unfinished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (Length):\u003c\/strong\u003e 2-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E (Thickness):\u003c\/strong\u003e 1\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #8 flat head screw, not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Door mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.24 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514201056\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 201530-1 door hinge made from?\u003c\/strong\u003e It is made from stamped 304 stainless steel, chosen for its resistance to corrosion in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 201530-1 hinge come with mounting screws?\u003c\/strong\u003e No, fasteners are not included. The hinge installs with six #8 flat head screws that must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 201530-1 door hinge?\u003c\/strong\u003e The 201530-1 measures 2-7\/8 inches for dimension A, 1-7\/16 inches for both dimension B and C, 1-1\/2 inches for dimension D, and 1\/16 inch thick for dimension E.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 201530-1 sold individually or as a pair?\u003c\/strong\u003e The Sea-Dog 201530-1 door hinge is sold as a pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 201530-1 door hinge weigh?\u003c\/strong\u003e The Sea-Dog 201530-1 door hinge weighs 0.24 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 201530-1 hinge rust in saltwater conditions?\u003c\/strong\u003e Stamped 304 stainless steel construction gives the 201530-1 corrosion resistance suited to withstand the harsh marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fasteners does the Sea-Dog 201530-1 hinge require?\u003c\/strong\u003e It requires six #8 flat head fasteners, which are not included with the hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a surface mount or flush mount hinge?\u003c\/strong\u003e The 201530-1 is a door mount hinge, distinct from Sea-Dog's flush door hinge design that sits below the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 201530-1 door hinge?\u003c\/strong\u003e The UPC for the Sea-Dog Door Hinge, part number 201530-1, is 035514201056.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is the 201530-1 door hinge used for?\u003c\/strong\u003e This stainless steel hinge is used on marine cabinet doors, lockers, and other door applications requiring corrosion resistant hardware.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988548464859,"sku":"S-D-201530-1","price":13.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7073.jpg?v=1784422380"},{"product_id":"sea-dog-201914-1-semi-concealed-offset-hinge-304-stainless-steel-2-3-16-x-2-3-4-3-8-offset","title":"Sea-Dog Semi-Concealed Offset Cabinet Hinge 201914-1, 304 Stainless Steel, 2-3\/16 x 2-3\/4 Inch","description":"\u003cp\u003eThe Sea-Dog 201914-1 is a semi-concealed offset hinge built for cabinet and locker doors on boats, RVs, and other marine or marine-grade applications. It is stamped from corrosion-resistant 304 stainless steel, making it suitable for the damp, salt-exposed environments typical of onboard cabinetry, galley cabinets, and storage lockers.\u003c\/p\u003e\u003cp\u003eThis hinge mounts on the back surface of the door and pairs with a 3\/8 inch offset that is mortised into the edge of the door, keeping the door flush while allowing it to swing clear of the frame. The hinge measures 2-3\/16 inches by 2-3\/4 inches, with a 1\/16 inch material thickness, and installs using five #6 RH screws (fasteners are not included). Each hinge weighs 0.152 pounds.\u003c\/p\u003e\u003cp\u003eBecause it is a semi-concealed design, part of the hinge remains visible on the door face while the offset portion tucks into the mortised edge, giving a cleaner look than a fully exposed surface-mount hinge without the extra fitting work of a fully concealed hinge.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 201914-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Semi-Concealed Offset Hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unfinished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (Length):\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B (Width):\u003c\/strong\u003e 2-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C (Thickness):\u003c\/strong\u003e 1\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E (Door Offset):\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension F:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.152 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each \/ 10 pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e Five #6 RH screws (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Door Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514201155\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits cabinet or locker doors designed for a semi-concealed offset hinge with a 3\/8 inch mortised offset on the door edge; universal application, not model-specific.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 201914-1 hinge used for?\u003c\/strong\u003e It is a semi-concealed offset hinge designed for mounting on the back surface of cabinet or locker doors, commonly used on boat galley and storage cabinetry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 201914-1 hinge made from?\u003c\/strong\u003e It is stamped from 304 stainless steel, chosen for its corrosion resistance in damp or salt-exposed environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this hinge?\u003c\/strong\u003e The 201914-1 measures 2-3\/16 inches long by 2-3\/4 inches wide, with a material thickness of 1\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 201914-1 hinge weigh?\u003c\/strong\u003e Each Sea-Dog 201914-1 hinge weighs 0.152 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the door need to be modified to install this hinge?\u003c\/strong\u003e Yes, the door edge needs a 3\/8 inch offset mortised into it to correspond with the hinge, since this is a semi-concealed offset design rather than a surface-mount hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat screws are needed to install the 201914-1?\u003c\/strong\u003e Installation requires five #6 RH screws, which are not included with the hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hinge fully hidden when the door is closed?\u003c\/strong\u003e No, it is a semi-concealed design, meaning part of the hinge remains visible on the door surface while the offset portion is mortised into the door edge; a fully hidden option would be a flush mount concealed hinge instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hinge come in a finish other than stainless steel?\u003c\/strong\u003e The 201914-1 is stainless steel; a polished brass version with the same 2-3\/16 by 2-3\/4 inch dimensions is offered as a separate part number for buyers who prefer that finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 201914-1 sold as a single hinge or a pair?\u003c\/strong\u003e It is packed in standard quantities of 10 each or 10 pair, so check the listing quantity to confirm how many hinges are included in the specific unit being ordered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mounting type for this hinge?\u003c\/strong\u003e The Sea-Dog 201914-1 is a door-mount hinge that attaches to the back surface of the cabinet door.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988548530395,"sku":"S-D-201914-1","price":12.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7089.jpg?v=1784422401"},{"product_id":"sea-dog-201954-1-flush-mount-concealed-hinge-304-stainless-steel-1-7-8-x-2-3-4-for-marine-cabinets-and-doors","title":"Sea-Dog Flush Mount Concealed Hinge 201954-1, 304 Stainless Steel, 1-7\/8 x 2-3\/4 Inch","description":"\u003cp\u003eThe Sea-Dog 201954-1 Flush Mount Concealed Hinge is built to disappear when the door is closed, keeping cabinetry and access doors looking clean and uninterrupted. It is constructed of stamped 304 stainless steel, chosen specifically for its resistance to corrosion in harsh marine environments, so the hinge holds up to salt air and moisture exposure without rusting or staining surrounding surfaces.\u003c\/p\u003e\u003cp\u003eThis concealed-hinge design mounts flush so no hinge barrel or leaf is visible from the front of the cabinet or door, giving boat interiors, galleys, and helm cabinetry a finished, built-in appearance. The hinge measures 1-7\/8 inches (dimension A) by 2-3\/4 inches (dimension B), with a material thickness of 1\/16 inch (dimension C) and a 1-1\/2 inch depth (dimension D). Installation is straightforward: the hinge is designed to install with five number 6 flat head fasteners, which are not included and should be sourced separately in stainless steel to match.\u003c\/p\u003e\u003cp\u003eBecause it is a display-packaged unit, the 201954-1 is well suited to boat builders, marine cabinet makers, and DIY boat owners replacing or upgrading cabinet, hatch, or access door hinges where a low-profile, corrosion-resistant fastening solution is required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 201954-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (Length):\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B (Width):\u003c\/strong\u003e 2-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C (Thickness):\u003c\/strong\u003e 1\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D (Depth):\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #6 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Required:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Flush Mount, Concealed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 pairs per package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.156 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 201954-1 hinge made of?\u003c\/strong\u003e The Sea-Dog 201954-1 is made of stamped 304 stainless steel, chosen for its resistance to corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the hinge visible when the cabinet door is closed?\u003c\/strong\u003e No. The 201954-1 is a flush mount concealed hinge, meaning it is designed to keep the hinge hidden from view once the door is closed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this hinge?\u003c\/strong\u003e The Sea-Dog 201954-1 measures 1-7\/8 inches by 2-3\/4 inches, with a material thickness of 1\/16 inch and a depth of 1-1\/2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fasteners are needed to install the 201954-1?\u003c\/strong\u003e Five number 6 flat head fasteners are needed to install the Sea-Dog 201954-1 Flush Mount Concealed Hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the mounting screws included with this hinge?\u003c\/strong\u003e No, fasteners are not included with the Sea-Dog 201954-1; it is designed to be installed with five #6 FH screws sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hinge rust or corrode on a boat?\u003c\/strong\u003e The 201954-1 is constructed of corrosion resistant 304 stainless steel, making it suitable for the harsh marine conditions boats are exposed to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hinges come in a package?\u003c\/strong\u003e The Sea-Dog 201954-1 display package contains 10 pairs of hinges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of this hinge?\u003c\/strong\u003e The Sea-Dog 201954-1 Flush Mount Concealed Hinge weighs 0.156 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of doors is this hinge suited for?\u003c\/strong\u003e The 201954-1 flush mount design suits cabinet, hatch, and access doors where a concealed, low-profile hinge is wanted, such as in boat galleys and interior cabinetry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the finish match other Sea-Dog stainless hardware?\u003c\/strong\u003e Yes, the Sea-Dog 201954-1 has a polished stainless steel finish consistent with the brand's other stainless cabinet hardware.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988548563163,"sku":"S-D-201954-1","price":11.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7208.jpg?v=1784422405"},{"product_id":"sea-dog-202510-1-short-side-door-hinge-black-nylon-with-stainless-steel-pin-compact-marine-cabinet-hatch-hinge","title":"Sea-Dog Nylon Short Side Door Hinge, Black, 202510-1","description":"\u003cp\u003eThe Sea-Dog 202510-1 is a short side door hinge built for marine cabinet, hatch, and door applications where a compact, corrosion-resistant hinge is needed. It is constructed of nylon and finished in black, making it well suited to the humid, salt-air conditions found on boats where metal hinges are prone to corrosion. The hinge is a lightweight hardware component, weighing just 0.07 pounds, making it easy to handle and install without adding bulk to cabinetry or small doors. As a nylon hinge, it will not rust or corrode the way steel or brass hardware can, giving it a long service life in onboard cabinet and storage door applications. This part is sold under the Sea-Dog part number 202510-1.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 202510-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Short Side Door Hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Cabinet Hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5 x 4 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514202015\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 202510-1?\u003c\/strong\u003e It is a short side door hinge made of nylon in a black finish, designed for cabinet, hatch, and small door applications on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 202510-1 hinge made of?\u003c\/strong\u003e Nylon. The nylon construction resists corrosion in marine environments where metal hinges typically rust or corrode over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this hinge come in?\u003c\/strong\u003e The Sea-Dog 202510-1 is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 202510-1 hinge weigh?\u003c\/strong\u003e It weighs 0.07 pounds, making it a lightweight piece of cabinet hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions for the 202510-1 hinge?\u003c\/strong\u003e It ships in a package measuring 5 x 4 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 202510-1 suitable for outdoor or wet environments?\u003c\/strong\u003e Yes, its nylon construction is resistant to corrosion, which makes it a suitable choice for the humid and salt-air conditions common on boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this hinge?\u003c\/strong\u003e The Sea-Dog 202510-1 short side door hinge has UPC 035514202015.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 202510-1 include mounting hardware?\u003c\/strong\u003e The dossier for this hinge does not list included fasteners, so buyers should plan to supply their own mounting screws sized for their door and jamb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a full-size or short hinge?\u003c\/strong\u003e It is identified as a short side door hinge, distinguishing it from longer or standard-length hinge variants.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there OEM cross-reference numbers for the 202510-1?\u003c\/strong\u003e No cross-reference numbers are published for the Sea-Dog 202510-1; it is ordered directly by its Sea-Dog part number.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988548595931,"sku":"S-D-202510-1","price":6.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7091.jpg?v=1784422411"},{"product_id":"sea-dog-202531-1-nylon-door-hinge-white-3-x-1-3-8-with-stainless-steel-pin-pair","title":"Sea-Dog Door Hinge 202531-1, White Fiberglass Nylon, 3 Inch x 1-3\/8 Inch, Stainless Steel Pin","description":"\u003cp\u003eThe Sea-Dog 202531-1 is a white injection molded fiberglass nylon door hinge built for both interior and exterior marine use. The hinge body is UV resistant fiberglass nylon, paired with a corrosion resistant stainless steel pin so it holds up to sun, salt air, and repeated cycling without seizing or discoloring like unprotected metal hardware. It measures 3 inches overall with a 1-3\/8 inch dimension across the barrel, and it installs using six #8 flat head fasteners (fasteners are not included). For hatch covers or other thin, thick, or brittle panels where a nut and washer alone could crack the material, this hinge can be paired with the Sea-Dog Backing Plate for Door Hinge (202539) to add rigidity and spread the fastening load. The 202531-1 is the white version of this hinge; the same hinge is also available in black under part number 202530-1 for buyers matching existing hardware. Sea-Dog also offers this hinge in custom colors for large volume orders. Whether you are replacing a cracked or corroded hinge on a hatch, door, or cabinet, or outfitting a new build, the 202531-1 gives you a lightweight, non-rusting hinge sized for standard 3 inch hardware openings.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 202531-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Fiberglass Nylon with Stainless Steel Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (Overall Length):\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E (Pin Diameter):\u003c\/strong\u003e 3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #8 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.082 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each \/ 10 pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514202046\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for interior and exterior door, hatch, and cabinet applications requiring a standard 3 inch fiberglass nylon hinge.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog 202531-1 door hinge?\u003c\/strong\u003e The 202531-1 is white. Sea-Dog also makes the same hinge in black under part number 202530-1, and it is available in custom colors for large volume orders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 202531-1 door hinge made of?\u003c\/strong\u003e It is constructed of UV resistant injection molded fiberglass nylon with a corrosion resistant stainless steel pin, which is why it resists cracking in sunlight and does not rust like plain steel hinges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this hinge?\u003c\/strong\u003e The Sea-Dog 202531-1 measures 3 inches for dimension A, 1-1\/2 inches for dimension B, 1-1\/2 inches for dimension C, 1-3\/8 inches for dimension D, and 3\/16 inches for dimension E (the pin diameter).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 202531-1 hinge weigh?\u003c\/strong\u003e This hinge weighs 0.082 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install this door hinge?\u003c\/strong\u003e The 202531-1 installs with six #8 flat head fasteners, which are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hinge be used on both interior and exterior surfaces?\u003c\/strong\u003e Yes, the Sea-Dog 202531-1 is suited for both interior and exterior applications since it is built from UV resistant fiberglass nylon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a backing plate with this hinge?\u003c\/strong\u003e A backing plate is not required for every installation, but on thick hatch covers that could crack when using nuts and washers alone, the Sea-Dog Backing Plate for Door Hinge (202539) can be used with the 202531-1 to add rigidity and strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the stainless steel pin removable or replaceable?\u003c\/strong\u003e The dossier does not specify whether the stainless steel pin on the 202531-1 hinge is removable or sold separately, so buyers needing that detail should confirm before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hinges come in a package?\u003c\/strong\u003e The 202531-1 is packed as 10 each or 10 pair per standard pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a custom color version of this hinge available?\u003c\/strong\u003e Yes, Sea-Dog offers this door hinge in custom colors for large volume orders in addition to the standard white 202531-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between part 202531-1 and 202530-1?\u003c\/strong\u003e Both are the same fiberglass nylon door hinge with the same dimensions and #8 flat head fastener pattern; 202531-1 is the white version and 202530-1 is the black version.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988548792539,"sku":"S-D-202531-1","price":6.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7092.jpg?v=1784439642"},{"product_id":"sea-dog-nylon-door-hinge-with-stainless-steel-pin-black-3-in-pair-mpn-202530-1","title":"Sea-Dog Nylon Door Hinge 202530-1, Black, 3 Inch","description":"\u003cp\u003eThe Sea-Dog 202530-1 is a black nylon door hinge built for marine cabin doors, hatches, and lockers where corrosion resistance matters. It is molded from UV resistant nylon (ZYTEL), so it holds up to sun and saltwater exposure without the rust or pitting that plagues bare metal hardware on deck and belowdecks. The hinge measures 3 inches long and 1-3\/8 inches wide, sized for standard cabinetry and door applications aboard boats, RVs, and outdoor enclosures.\u003c\/p\u003e\u003cp\u003eMounting is done with #8 flat head (FH) fasteners (not included), so installation follows the same pattern as a typical butt-style door hinge: mortise or surface-mount the leaves to the door and jamb and drive the fasteners through the pre-formed holes. For thicker hatch covers or high-stress mounting points, the hinge can be paired with a Sea-Dog backing plate (part 202539) to add rigidity and prevent the fastener holes from breaking out over time; the backing plate is a separate part sold on its own.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 202530-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Door Hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon (ZYTEL)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unfinished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #8 FH (flat head), not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Door mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514202039\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Backing Plate:\u003c\/strong\u003e 202539 (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal door and cabinet hardware; not vehicle- or engine-specific.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers apply to this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 202530-1 made of?\u003c\/strong\u003e Part 202530-1 is molded from UV resistant nylon, sometimes called ZYTEL, which resists cracking and fading from sun exposure and does not rust like metal hinges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this hinge come in?\u003c\/strong\u003e The 202530-1 hinge is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this hinge?\u003c\/strong\u003e It measures 3 inches long and 1-3\/8 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 202530-1 hinge weigh?\u003c\/strong\u003e It weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners do I need to install it?\u003c\/strong\u003e The 202530-1 mounts with #8 flat head (FH) fasteners, which are not included with the hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hinge sold as a single piece or a pair?\u003c\/strong\u003e The 202530-1 listing is for one hinge; order two if you need a matching pair for a single door.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hinge rust like a metal hinge?\u003c\/strong\u003e No. Because the 202530-1 is nylon rather than metal, it will not rust or corrode in a marine or wet environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reinforce this hinge on a thin or thick door panel?\u003c\/strong\u003e Yes, the 202530-1 can be paired with a separate Sea-Dog backing plate (part 202539) for added rigidity on thicker hatch covers or high-stress mounting points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the finish on the 202530-1?\u003c\/strong\u003e It has an unfinished nylon surface in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hinge suitable for outdoor or marine use?\u003c\/strong\u003e Yes, the nylon construction of the 202530-1 is UV resistant, making it suitable for boat cabin doors, hatches, and other outdoor or marine hardware applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mounting type for this hinge?\u003c\/strong\u003e The 202530-1 is a door mount hinge, installed on the abutting surfaces of a door and its frame.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988548825307,"sku":"S-D-202530-1","price":6.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7092_75c74187-1433-4fc3-b1dc-cc74af367536.jpg?v=1784439644"},{"product_id":"sea-dog-202580-1-nylon-butt-hinge-black-1-1-2-x-1-3-8-with-stainless-steel-pin","title":"Sea-Dog Nylon Butt Hinge 202580-1, Black, 1-1\/2 x 1-3\/8 Inch, Stainless Steel Pin","description":"\u003cp\u003eThe Sea-Dog 202580-1 is a butt hinge built for marine cabinet doors, hatches, and lockers where a durable, corrosion-resistant hinge is needed. It consists of two rectangular leaves that attach to the abutting surfaces of a door and door jamb, joined together by a hinge pin, and is designed to be mortised or recessed into both surfaces for a flush fit. The leaves are injection molded from UV-resistant fiberglass reinforced nylon, so they will not rust like an all-metal hinge, while the hinge pin itself is stainless steel for added strength and corrosion resistance at the wear point. This construction keeps the hinge lightweight while standing up to sun and saltwater exposure over time.\u003c\/p\u003e\u003cp\u003eThe hinge measures 1-1\/2 inches long by 1-3\/8 inches wide, with each leaf 3\/4 inch wide and a 3\/16 inch diameter pin, and it is finished in black to blend with dark cabinetry and trim. It installs with four #8 flat head fasteners, which are not included, so have matching screws on hand before installation. This hinge is sold individually; a matching white version is available under a separate part number for buyers who need a lighter finish.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 202580-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Butt Hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fiberglass Reinforced Nylon (leaves), Stainless Steel (pin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaf Width (each):\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Diameter:\u003c\/strong\u003e 3\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #8 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.048 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Door Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514202053\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 202580-1 butt hinge made of?\u003c\/strong\u003e The 202580-1 hinge leaves are injection molded from UV-resistant fiberglass reinforced nylon, and the hinge pin that joins the two leaves is stainless steel for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this hinge available in?\u003c\/strong\u003e Part number 202580-1 is the black version of Sea-Dog's nylon butt hinge; a white version is offered under a different part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 202580-1 hinge?\u003c\/strong\u003e It measures 1-1\/2 inches long by 1-3\/8 inches wide, with each leaf 3\/4 inch wide and a hinge pin diameter of 3\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this hinge weigh?\u003c\/strong\u003e The Sea-Dog 202580-1 butt hinge weighs 0.048 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install this hinge?\u003c\/strong\u003e Installation requires four #8 flat head fasteners, which are not included with the 202580-1 hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hinge rust resistant?\u003c\/strong\u003e Yes, the fiberglass nylon leaves will not rust, and the only metal component, the hinge pin, is stainless steel, making the 202580-1 well suited to marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is a butt hinge like the 202580-1 installed?\u003c\/strong\u003e Butt hinges are typically mortised or recessed into both the door and the door jamb so the two leaves sit flush, then secured with #8 flat head screws through each leaf.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 202580-1 hinge sold as a single unit or a pair?\u003c\/strong\u003e This Sea-Dog butt hinge is sold individually as one hinge, part number 202580-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 202580-1 hinge be used on cabinet doors as well as hatches?\u003c\/strong\u003e Yes, this style of butt hinge is suited to cabinet doors, lockers, and hatch lids wherever two abutting surfaces need a mortised, flush-mounted hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the black color fade in sunlight?\u003c\/strong\u003e The nylon used in the 202580-1 hinge leaves is UV resistant, which helps the black finish hold up under sun exposure.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988548858075,"sku":"S-D-202580-1","price":6.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7093.jpg?v=1784422444"},{"product_id":"sea-dog-204280-1-hatch-hinge-chrome-plated-forged-brass-with-removable-clevis-pin-2-1-2-in","title":"Sea-Dog Hatch Hinge 204280-1, Forged Brass Chrome Plated, 2-1\/2 Inch","description":"\u003cp\u003eThe Sea-Dog Hatch Hinge (part number 204280-1) is a forged brass, chrome plated hinge built for marine hatches and deck lids that need to stay open on their own. A removable clevis pin with split ring lets the hinge separate easily for hatch removal or hardware service, while a built-in stop holds the hatch securely in the upright, open position instead of letting it swing or slam shut. Constructed of chrome plated forged brass, the hinge resists corrosion from saltwater and marine environments while providing long-term durability for repeated opening and closing.\u003c\/p\u003e\u003cp\u003eThis hinge measures 2-1\/2 inches for dimension A, 1-1\/4 inches for dimension B, 3 inches for dimension C, and 1\/4 inch for dimension D, and installs using seven #10 flat head fasteners (fasteners not included). It is sold individually, so order the quantity needed for your hatch. The design suits boat hatches, deck lids, and storage compartments where a strong, corrosion-resistant hinge with a hold-open stop is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 204280-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Forged Brass, Chrome Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (Length):\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #10 flat head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.562 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Door mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514204033\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Individually\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for boat hatches, deck lids, and compartments sized for a 2-1\/2 inch hatch hinge; no specific make, engine, or model fitment applies to this hardware item.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is part number 204280-1 used for?\u003c\/strong\u003e The Sea-Dog 204280-1 is a hatch hinge designed to mount on boat hatches, deck lids, and compartment covers, holding the hatch open with a built-in stop while allowing easy separation via a removable clevis pin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog hatch hinge made of?\u003c\/strong\u003e It is constructed of forged brass with a chrome plated finish, chosen for corrosion resistance and durability in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hinge come with mounting fasteners?\u003c\/strong\u003e No, the 204280-1 hinge installs with seven #10 flat head fasteners, but the fasteners are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 204280-1 hinge?\u003c\/strong\u003e The hinge measures 2-1\/2 inches for dimension A, 1-1\/4 inches for dimension B, 3 inches for dimension C, and 1\/4 inch for dimension D.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog hatch hinge weigh?\u003c\/strong\u003e The 204280-1 hatch hinge weighs 0.562 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the hatch hinge have a hold-open feature?\u003c\/strong\u003e Yes, the 204280-1 is designed with a stop that holds the hatch in the upright position when open, preventing it from swinging or falling shut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the clevis pin be removed for hatch removal?\u003c\/strong\u003e Yes, the hinge features a removable clevis pin with a split ring, allowing the hatch to be separated from the hinge easily for removal or service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 204280-1 sold as a single hinge or a pair?\u003c\/strong\u003e It is sold individually, so buyers should order the number of hinges needed for their hatch installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a replacement clevis pin available for this hinge?\u003c\/strong\u003e Yes, a replacement clevis pin and split ring is available separately for the 204280-1 hatch hinge line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of hatches is this hinge suited for?\u003c\/strong\u003e The 204280-1 hinge fits boat hatches, deck lids, and storage compartments that require a corrosion-resistant hinge with a hold-open stop; it is not designated for a specific boat make or model.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988548890843,"sku":"S-D-204280-1","price":36.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7739.jpg?v=1784422450"},{"product_id":"sea-dog-204278-1-take-apart-hinge-left-chrome-plated-forged-brass-marine-hatch-hinge-3-7-8-sold-per-pair","title":"Sea-Dog 204278-1 Take-Apart Hinge, Left Side, Forged Brass Chrome Plated, 3-7\/8 Inch","description":"\u003cp\u003eThe Sea-Dog 204278-1 is a left side take-apart hinge built for boat doors, lids, and hatches that need to come off after installation without removing any fasteners. Once the leaves are separated, the door or lid simply lifts free for stowing, cleaning, or servicing, then drops right back into place and realigns on the pin. The hinge is forged brass with a chrome plated finish for corrosion resistance and a bright, durable look that holds up in a marine environment.\u003c\/p\u003e\u003cp\u003eIt mounts to the surface either horizontally or vertically, so it works on hatch covers, lockers, cabinet doors, and lid assemblies where orientation varies from boat to boat. Each leaf is drilled for four #10 flat head fasteners (fasteners not included), and the hinge is sold and shipped as a pair. Because this is the left side hinge, it must be paired with its mirror-image counterpart, part number 204279-1, for a matching set on a two-hinge installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 204278-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Forged Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 3-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaf Thickness (E):\u003c\/strong\u003e 3\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Count:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.69 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514204019\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 204278-1 a left or right side hinge?\u003c\/strong\u003e Part number 204278-1 is the left side take-apart hinge. The mirror-image right side version is a separate part, 204279-1, so make sure you order the side that matches your installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'take-apart' mean for this hinge?\u003c\/strong\u003e It means the door or lid can be lifted completely free of the hinge without removing any of the mounting fasteners. The 204278-1 hinge separates at the pin, so the panel can be taken off for cleaning or stowing and then set back in place to realign.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 204278-1 hinge made from?\u003c\/strong\u003e It is forged brass with a chrome plated finish, giving it corrosion resistance along with a bright finish suited to marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this hinge?\u003c\/strong\u003e The 204278-1 measures 3-7\/8 inches overall (A), with 1-15\/16 inches at both the B and C measurements, 2 inches at D, and a 3\/16 inch leaf thickness (E).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 204278-1 hinge pair weigh?\u003c\/strong\u003e The Sea-Dog 204278-1 take-apart hinge weighs 0.69 pounds as sold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hinge come with mounting screws?\u003c\/strong\u003e No, fasteners are not included. The 204278-1 is drilled for four #10 flat head screws per leaf, which need to be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hinge be mounted vertically as well as horizontally?\u003c\/strong\u003e Yes, the 204278-1 take-apart hinge is designed to work in either a horizontal or vertical mounting orientation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 204278-1 hinge mounted?\u003c\/strong\u003e It is a surface mount hinge with two holes per leaf, installed with four #10 flat head fasteners through the face of the door or frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hinge sold as a single piece or a pair?\u003c\/strong\u003e The Sea-Dog 204278-1 left side hinge is sold as a pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is this hinge suited for?\u003c\/strong\u003e It is intended for boat doors, lids, and hatch covers where the panel may need to be removed occasionally for stowing or cleaning, without having to unscrew the hinge fasteners each time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 204278-1 hinge have?\u003c\/strong\u003e It has a chrome plated finish over forged brass construction.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988548923611,"sku":"S-D-204278-1","price":41.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7738.jpg?v=1784422452"},{"product_id":"sea-dog-205140-1-butt-hinge-investment-cast-316-stainless-steel-1-5-8-x-1-1-2-marine-door-cabinet-hinge","title":"Sea-Dog Stainless Steel Butt Hinge 205140-1, 1-5\/8 x 1-1\/2 Inch","description":"\u003cp\u003eThe Sea-Dog 205140-1 Butt Hinge is a compact marine-grade hinge built from investment cast 316 stainless steel, chosen for its resistance to corrosion in saltwater and humid marine environments. It consists of two rectangular leaves that attach to the abutting surfaces of a door and door jamb, typically mortised into each surface and joined together by a hinge pin for smooth, reliable swing action.\u003c\/p\u003e\u003cp\u003eThis hinge is sized for smaller doors, hatches, lockers, and cabinets aboard a boat, or for comparable marine cabinetry applications ashore. Each leaf measures 1-5\/8 inches (dimension A) with a 13\/16 inch dimension on both the B and C measurements, an overall D dimension of 1-1\/2 inches, and a leaf thickness (E) of 3\/16 inch. It installs using four #10 flat head fasteners, which are not included, allowing the installer to select fastener length and finish to suit the mounting surface.\u003c\/p\u003e\u003cp\u003eBecause it is cast rather than stamped, the hinge holds its shape and pin alignment under repeated use and resists the pitting and rust that can affect lower-grade hardware over time. It is sold and packed as a single hinge unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 205140-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Butt Hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 13\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 13\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E (Leaf Thickness):\u003c\/strong\u003e 3\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Required:\u003c\/strong\u003e Four #10 FH fasteners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.254 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 205140-1 hinge made of?\u003c\/strong\u003e The 205140-1 is made of investment cast 316 stainless steel, which resists corrosion in saltwater and humid marine environments better than stamped or lower-grade steel hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this hinge?\u003c\/strong\u003e The Sea-Dog 205140-1 measures 1-5\/8 inches for dimension A, 13\/16 inches for both B and C, 1-1\/2 inches overall for dimension D, and has a leaf thickness of 3\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with this hinge?\u003c\/strong\u003e No, the 205140-1 installs with four #10 flat head fasteners, but these fasteners are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fasteners does the 205140-1 hinge require?\u003c\/strong\u003e Four #10 flat head (FH) fasteners are needed to mount each Sea-Dog 205140-1 butt hinge in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a full hinge or a single leaf?\u003c\/strong\u003e The 205140-1 is a complete butt hinge consisting of two rectangular leaves joined by a hinge pin, sold as one full hinge unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is this hinge suited for?\u003c\/strong\u003e This Sea-Dog butt hinge is sized for smaller doors, hatches, lockers, and cabinets where a compact, corrosion-resistant hinge is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does casting affect the durability of the 205140-1?\u003c\/strong\u003e Being investment cast rather than stamped, the 205140-1 holds its shape and pin alignment better over repeated use and resists pitting compared to lower-grade hinges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the hinge come with a hinge pin installed?\u003c\/strong\u003e Yes, the two leaves of the Sea-Dog 205140-1 are joined together by a hinge pin as a complete, ready-to-mount hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the 205140-1 hinge?\u003c\/strong\u003e The Sea-Dog 205140-1 butt hinge weighs 0.254 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hinge be mortised into a door and jamb?\u003c\/strong\u003e Yes, the 205140-1 leaves are designed to be mortised into the abutting surfaces of a door and door jamb for a flush fit.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988548956379,"sku":"S-D-205140-1","price":18.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7740.jpg?v=1784422462"},{"product_id":"sea-dog-205142-1-butt-hinge-316-stainless-steel-1-15-16-x-1-15-16-sold-per-pair","title":"Sea-Dog 316 Stainless Steel Butt Hinge 1-15\/16 Inch, 205142-1, Sold in Pairs","description":"\u003cp\u003eThe Sea-Dog 205142-1 is an investment cast 316 stainless steel butt hinge sized for doors, hatches, and lockers aboard boats and in other corrosion-prone environments. Butt hinges consist of two rectangular leaves that attach to the abutting surfaces of a door and door jamb; they are typically mortised into the surrounding wood or fiberglass so the leaves sit flush, then joined together by a hinge pin that lets the door swing freely. Because the leaves and pin are investment cast from 316 stainless steel rather than stamped from lighter-grade alloys, the 205142-1 resists rust and pitting in salt air and washdown conditions far better than standard hardware store hinges, making it a long-term fit for marine cabinetry, companionway doors, and storage compartments.\u003c\/p\u003e\u003cp\u003eThis hinge measures 1-15\/16 inches across the leaf and 15\/16 inches wide per leaf, with a 3\/16 inch pin diameter, and it opens to a full 1-15\/16 inches. It installs with four #10 flat head fasteners (not included), which countersink into the mortise for a clean, low-profile finish once mounted. The 205142-1 is sold as a matched pair, giving you both hinges needed for a single door or hatch in one purchase. Its unfinished silver stainless finish blends with most marine hardware and does not require additional coating.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 205142-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaf Dimension (A):\u003c\/strong\u003e 1-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaf Width (B):\u003c\/strong\u003e 15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaf Width (C):\u003c\/strong\u003e 15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen Length (D):\u003c\/strong\u003e 1-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Diameter (E):\u003c\/strong\u003e 3\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #10 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each \/ 10 pairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unfinished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 6 inches L x 4 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.384 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Door Mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 205142-1 butt hinge?\u003c\/strong\u003e The 205142-1 measures 1-15\/16 inches across the leaf (dimension A) and 15\/16 inches wide per leaf (dimensions B and C), with a 3\/16 inch pin diameter and a 1-15\/16 inch open length (dimension D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hinge sold individually or as a pair?\u003c\/strong\u003e The 205142-1 is sold as a pair, giving you both hinges needed for one door or hatch in a single purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 205142-1 made from?\u003c\/strong\u003e It is investment cast from 316 stainless steel, a corrosion-resistant grade well suited to salt air and washdown exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting screws included with the 205142-1?\u003c\/strong\u003e No, fasteners are not included. The hinge is designed to install with four #10 flat head screws per hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 205142-1 need to be mortised into the door?\u003c\/strong\u003e Yes, like most butt hinges, the 205142-1 leaves are typically mortised into the door and jamb so they sit flush once installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Sea-Dog 205142-1 have?\u003c\/strong\u003e The 205142-1 has an unfinished silver stainless steel finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 205142-1 rust in a marine environment?\u003c\/strong\u003e Because it is cast from 316 stainless steel, the 205142-1 resists rust and pitting better than standard hardware-grade hinges in salt air and washdown conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 205142-1 and the smaller 205140-1 hinge?\u003c\/strong\u003e The 205140-1 is a smaller butt hinge with a 1-5\/8 inch leaf dimension, while the 205142-1 steps up to a 1-15\/16 inch leaf dimension for larger doors or hatches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 205142-1 weigh?\u003c\/strong\u003e The Sea-Dog 205142-1 butt hinge pair weighs 0.384 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the package size for the 205142-1?\u003c\/strong\u003e The 205142-1 ships in packaging measuring 6 inches long by 4 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 205142-1 be used on cabinets as well as doors?\u003c\/strong\u003e Yes, the 205142-1 is a standard door-mount butt hinge suitable for doors, hatches, and cabinetry where a corrosion-resistant hinge is needed.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988548989147,"sku":"S-D-205142-1","price":22.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7740_1b622b12-496b-406e-a97f-26629221cc52.jpg?v=1784422467"},{"product_id":"sea-dog-205390-1-strap-hinge-4-1-8-investment-cast-316-stainless-steel-pair","title":"Sea-Dog 205390-1 Strap Hinge, 316 Stainless Steel, 4-1\/8 Inch, Sold in Pairs","description":"\u003cp\u003eThe Sea-Dog 205390-1 Strap Hinge is an investment cast 316 stainless steel hinge built for gates, dock box lids, fish holds, and other outdoor marine hardware applications that see frequent use. Its strap design consists of two long, narrow leaves of equal length extending from a single knuckle, giving it a wide swing radius and a low-profile surface mount. Because it is investment cast from 316 stainless steel, the 205390-1 resists corrosion in saltwater and marine environments better than standard stainless or plated steel hardware, making it well suited for hatches, lids, and doors that are exposed to the elements.\u003c\/p\u003e\u003cp\u003eThe hinge surface mounts using four #10 fasteners per leaf (fasteners not included), and each leaf measures 4-1\/8 inches long with a 1 inch maximum width and 3\/16 inch thickness. The 205390-1 part number is sold as a pair, giving both hinges needed for a typical gate, lid, or door installation. Its compact size and simple surface-mount design make it a straightforward replacement or upgrade for aging hinges on boats, docks, and outdoor storage boxes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 205390-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Strap Hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 4-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaf Width:\u003c\/strong\u003e 2-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKnuckle Width:\u003c\/strong\u003e 2-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Spacing:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 3\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Width:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.346 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514205092\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal surface-mount hinge for gates, dock box lids, fish holds, hatches, and similar outdoor marine applications; not model-specific.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 205390-1 strap hinge made from?\u003c\/strong\u003e It is made from investment cast 316 stainless steel, which resists corrosion in saltwater and other marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hinges come in a package?\u003c\/strong\u003e The 205390-1 is sold as a pair, so one package includes two matching strap hinges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 205390-1 strap hinge?\u003c\/strong\u003e Each leaf is 4-1\/8 inches long with a 1 inch maximum width and 3\/16 inch thickness, with a knuckle and leaf width of 2-1\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install this hinge?\u003c\/strong\u003e Four #10 flat head fasteners per leaf are used to surface mount the 205390-1; fasteners are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is this strap hinge used for?\u003c\/strong\u003e Strap hinges like the 205390-1 are commonly used on gates, dock box lids, and fish holds, and are suited to outdoor applications where the hinge sees frequent use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 205390-1 hinge weigh?\u003c\/strong\u003e The Sea-Dog 205390-1 strap hinge weighs 0.346 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 205390-1 hinge suitable for saltwater use?\u003c\/strong\u003e Yes, its investment cast 316 stainless steel construction is corrosion resistant, making it suitable for saltwater and marine outdoor environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the strap hinge come pre-drilled for mounting?\u003c\/strong\u003e The 205390-1 is designed for surface mounting with four #10 fasteners per leaf; specific mounting hardware is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between a strap hinge and a standard door hinge from Sea-Dog?\u003c\/strong\u003e The 205390-1 strap hinge has two long, narrow leaves of equal length extending from a single knuckle, while Sea-Dog's door hinges use a different leaf shape and fastener count better suited to hatch and door installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 205390-1 genuine Sea-Dog hardware?\u003c\/strong\u003e Yes, the 205390-1 is a genuine Sea-Dog part, investment cast from 316 stainless steel.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988549054683,"sku":"S-D-205390-1","price":25.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7747.jpg?v=1784422488"},{"product_id":"sea-dog-205400-1-strap-hinge-investment-cast-316-stainless-steel-5-7-8-surface-mount-marine-hinge-for-dock-boxes-gates-fish-holds","title":"Sea-Dog 205400-1 Strap Hinge, 316 Stainless Steel, 5-7\/8 Inch, Pair","description":"\u003cp\u003eThe Sea-Dog 205400-1 Strap Hinge is a surface-mount hinge built from investment cast 316 stainless steel for reliable performance in marine and outdoor environments. It features two long, narrow leaves of equal length extending from a single knuckle, a design commonly used on gates, dock box lids, and fish holds where the hinge sees frequent use. The 316 stainless steel construction resists corrosion from saltwater exposure and repeated outdoor conditions, making it a durable choice for hardware that stays in service season after season.\u003c\/p\u003e\u003cp\u003eThis hinge measures 5-7\/8 inches overall (dimension A), with leaf widths of 2-15\/16 inches (dimensions B and C), a knuckle length of 1-1\/8 inches (dimension D), and a material thickness of 3\/16 inch (dimension E). It surface mounts using four #10 flat head fasteners, which are not included, and is sold as a pair of two hinges for a complete, matched installation. The unfinished stainless surface gives it a clean, functional look that fits a range of boat and dock applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 205400-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Strap Hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (Overall Length):\u003c\/strong\u003e 5-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 2-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 3\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e Pair (2 hinges)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unfinished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.494 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514205108\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 205400-1 Strap Hinge made of?\u003c\/strong\u003e It is made of investment cast 316 stainless steel, which resists corrosion in outdoor and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the 205400-1 strap hinge?\u003c\/strong\u003e The overall length is 5-7\/8 inches, with a leaf width of 2-15\/16 inches, a knuckle length of 1-1\/8 inches, and a material thickness of 3\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 205400-1 come as a single hinge or a pair?\u003c\/strong\u003e The Sea-Dog 205400-1 is sold as a pair, giving you two matching strap hinges for a complete installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners does this hinge require?\u003c\/strong\u003e The 205400-1 surface mounts with four #10 flat head fasteners, which are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 205400-1 strap hinge installed?\u003c\/strong\u003e It is a surface-mount hinge, meaning each leaf is fastened directly to the surface of the two parts it connects using four #10 flat head screws per leaf.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this strap hinge commonly used for?\u003c\/strong\u003e Strap hinges like the Sea-Dog 205400-1 are commonly used on gates, dock box lids, and fish holds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 205400-1 suitable for saltwater use?\u003c\/strong\u003e Yes, its investment cast 316 stainless steel construction is corrosion resistant, making it suitable for frequent outdoor and marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 205400-1 strap hinge weigh?\u003c\/strong\u003e The 205400-1 strap hinge weighs 0.494 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 205400-1 have?\u003c\/strong\u003e The Sea-Dog 205400-1 has an unfinished stainless steel surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a smaller version of this strap hinge?\u003c\/strong\u003e Yes, Sea-Dog also offers the 205390-1 Strap Hinge, which has an overall length of 4-1\/8 inches compared to the 5-7\/8 inches of the 205400-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 205400-1 Strap Hinge?\u003c\/strong\u003e The UPC for the 205400-1 Strap Hinge is 035514205108.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat design does the 205400-1 strap hinge use?\u003c\/strong\u003e It uses a strap hinge design, with two long, narrow leaves of equal length extending from a single knuckle.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988549087451,"sku":"S-D-205400-1","price":30.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7747_43b30a46-e8b9-4917-aeb9-dc86ece285eb.jpg?v=1784422498"},{"product_id":"sea-dog-205280-1-hatch-hinge-with-removable-clevis-pin-investment-cast-316-stainless-steel-2-7-8-in","title":"Sea-Dog Hatch Hinge with Removable Pin 205280-1, 316 Stainless Steel, 2-5\/8 Inch","description":"\u003cp\u003eThe Sea-Dog Hatch Hinge with Removable Pin (205280-1) is an investment-cast 316 stainless steel hinge built for boat hatches, deck lids, and lockers that need a corrosion-resistant, marine-grade hinge with the convenience of quick disassembly. A quick-release removable pin lets the two hinge leaves separate for cleaning, servicing, or hatch removal without unscrewing the whole assembly, and a built-in stop holds the hatch open in the upright position so it will not slam shut while you are working. The 316 stainless steel construction resists rust and pitting in saltwater and marine air far better than standard 304 stainless or plated steel hardware, making it suited to long-term exposure on deck.\u003c\/p\u003e\u003cp\u003eThe hinge measures 2-5\/8 inches by 1-1\/4 inches by 2-7\/8 inches with a 1\/4 inch leaf thickness, and it installs with eight #10 flat head fasteners (fasteners not included). It is sold individually, so order one hinge per unit needed. Sea-Dog also offers a replacement toggle-style removable pin (0P20502) that fits this and other Sea-Dog hatch hinges, so a worn or lost pin can be replaced without buying a whole new hinge.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 205280-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hatch Hinge with Removable Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Type:\u003c\/strong\u003e Quick-Release Removable Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D (Leaf Thickness):\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Fastener:\u003c\/strong\u003e #10 Flat Head screws (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Face Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unfinished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.444 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514205054\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 205280-1 hatch hinge made of?\u003c\/strong\u003e The Sea-Dog 205280-1 hatch hinge is made of investment cast 316 stainless steel, chosen for its resistance to corrosion in saltwater and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hinge come apart for cleaning or removal?\u003c\/strong\u003e Yes, the Sea-Dog 205280-1 features a quick-release removable pin that lets the two hinge leaves separate easily for cleaning, servicing, or removing the hatch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hinge hold my hatch open?\u003c\/strong\u003e Yes, the 205280-1 hinge includes a built-in stop that holds the hatch in the upright position when open, preventing it from swinging shut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 205280-1 hatch hinge?\u003c\/strong\u003e The hinge measures 2-5\/8 inches by 1-1\/4 inches by 2-7\/8 inches, with a leaf thickness of 1\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 205280-1 hatch hinge weigh?\u003c\/strong\u003e The Sea-Dog 205280-1 hatch hinge weighs 0.444 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install this hinge?\u003c\/strong\u003e Installation requires eight #10 flat head fasteners, which are not included with the Sea-Dog 205280-1 hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 205280-1 sold as a pair or individually?\u003c\/strong\u003e This hatch hinge is sold individually, so one 205280-1 unit is one hinge, not a matched pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I replace just the pin instead of the whole hinge?\u003c\/strong\u003e Yes, Sea-Dog offers a replacement toggle-style removable pin, part number 0P20502, that fits the 205280-1 hinge and other Sea-Dog hatch hinges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does this hinge have?\u003c\/strong\u003e The Sea-Dog 205280-1 hinge has an unfinished stainless steel finish, showing the natural surface of the investment cast 316 stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this hinge mounted?\u003c\/strong\u003e The 205280-1 is a face-mount hinge, installed flat against the mounting surface with #10 flat head fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hinge different from Sea-Dog's angle base hatch hinge?\u003c\/strong\u003e Yes, the 205280-1 is a standard hatch hinge with a removable pin and hold-open stop, while Sea-Dog's angle base hatch hinge uses a clevis pin and split ring and is designed for mounting at a variable angle.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988549120219,"sku":"S-D-205280-1","price":33.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7098.jpg?v=1784422505"},{"product_id":"sea-dog-207730-1-lift-gate-butt-hinge-left-hand-aluminum-with-nylon-washers-for-pontoon-gates-hatches-and-deck-lids","title":"Sea-Dog Aluminum Lift Gate Butt Hinge, Left Side, 207730-1","description":"\u003cp\u003eThe Sea-Dog 207730-1 is a left-side lift gate butt hinge built for boat and pontoon gates, doors, and hatches that need smooth, quiet operation. It is constructed of aluminum and uses nylon washers between the hinge leaves, which cushion movement and eliminate the metal-on-metal rattle and squeak common with lower-quality hinges. The hinge measures 2-1\/2 inches (dimension A) with leaf dimensions of 1-1\/4 inches by 1-1\/4 inches (B and C), an overall dimension D of 2-3\/4 inches, and a leaf thickness (E) of 1\/8 inch. It installs with six #10 RH (round head) fasteners, which are not included and must be sourced separately.\u003c\/p\u003e\u003cp\u003eThis is the left-side version only. Sea-Dog also makes a matching right-side hinge under a different part number (207735-1) for the opposite side of the gate, so be sure to confirm which side you need before ordering. The hinge weighs 0.22 pounds and is finished in an unfinished aluminum silver appearance, making it a practical, corrosion-resistant choice for marine lift gates, storage doors, and pontoon boat gates where reliable, quiet operation matters over time.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 207730-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 2-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #10 RH (round head), not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.22 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unfinished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Door mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514207034\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for left-side installation on lift gates, doors, and hatches; a separate right-side hinge (207735-1) is available for the opposite side.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich side does this hinge fit?\u003c\/strong\u003e The Sea-Dog 207730-1 is made specifically for the left side of a lift gate, door, or hatch. It is not reversible; the right-side version is a separate part, 207735-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 207730-1 hinge made of?\u003c\/strong\u003e It is constructed of aluminum with nylon washers between the leaves, which allow quiet movement and smooth operation while resisting corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with this hinge?\u003c\/strong\u003e No. The 207730-1 installs with six #10 RH (round head) fasteners, which are not included and need to be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 207730-1 lift gate hinge weigh?\u003c\/strong\u003e This hinge weighs 0.22 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 207730-1 hinge?\u003c\/strong\u003e The hinge measures 2-1\/2 inches overall (dimension A), with leaf dimensions of 1-1\/4 inches by 1-1\/4 inches (B and C), a dimension D of 2-3\/4 inches, and a leaf thickness (E) of 1\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this hinge used for?\u003c\/strong\u003e It is used as a butt hinge on boat and pontoon lift gates, doors, and hatches, providing the pivot point for the gate while keeping movement quiet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a right-side version of this hinge?\u003c\/strong\u003e Yes, Sea-Dog offers a matching right-side lift gate hinge under part number 207735-1 for the opposite side of the gate; it is a distinct SKU from the left-side 207730-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this hinge use nylon washers?\u003c\/strong\u003e The nylon washers sit between the hinge leaves of the 207730-1 to reduce metal-on-metal contact, which cuts down on rattling and keeps the gate operating smoothly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 207730-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, it is manufactured by Sea-Dog under part number 207730-1 and is sold as a genuine Sea-Dog lift gate hinge, not a generic substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener size does the hinge require?\u003c\/strong\u003e The 207730-1 requires six #10 RH fasteners for installation; these are not supplied with the hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the finish on this hinge resist corrosion?\u003c\/strong\u003e The 207730-1 has an unfinished aluminum finish in silver, which provides natural corrosion resistance suited to marine environments.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988549185755,"sku":"S-D-207730-1","price":16.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6772.jpg?v=1784422509"},{"product_id":"sea-dog-206530-1-door-hinge-2-7-8-chrome-plated-die-cast-zinc-sold-per-pair","title":"Sea-Dog Door Hinge 206530-1, Chrome Plated Die Cast Zinc, 2-7\/8 Inch, Sold as a Pair","description":"\u003cp\u003eThe Sea-Dog Door Hinge 206530-1 is an economical chrome plated hinge built from die cast zinc, sized for cabinet and small door applications aboard a boat or RV. Each hinge measures 2-7\/8 inches in length with a maximum height of 1-1\/2 inches, and the pair mounts using six #8 flat head fasteners (fasteners are not included, so have a set of #8 FH screws on hand before installation). The chrome plated finish gives the hinge a clean, polished look that matches other bright hardware in a galley, cabin, or cabinet interior.\u003c\/p\u003e\u003cp\u003eThis hinge is recommended for freshwater applications, making it well suited to interior cabinet doors, lockers, and compartments that are not regularly exposed to saltwater spray. It is sold as a pair, so both hinges needed for a typical door installation are included in one purchase. At 0.336 pounds for the pair, it is a lightweight, low-cost hardware solution for replacing worn or broken cabinet hinges.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 206530-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Door Hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength (A):\u003c\/strong\u003e 2-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth (B):\u003c\/strong\u003e 1-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth (C):\u003c\/strong\u003e 1-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Height (D):\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (E):\u003c\/strong\u003e 3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #8 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Required:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.336 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Freshwater applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Chrome Silver\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 206530-1 door hinge made of?\u003c\/strong\u003e It is made of die cast zinc with a chrome plated finish, giving the 206530-1 hinge a bright, polished look plus corrosion resistance for its intended freshwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 206530-1 hinge come as a single piece or a pair?\u003c\/strong\u003e The 206530-1 is sold as a pair, so one purchase provides both hinges typically needed for a single cabinet or locker door.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this door hinge?\u003c\/strong\u003e It measures 2-7\/8 inches in length with a maximum height of 1-1\/2 inches; the hinge leaf dimensions are 1-7\/16 inches by 1-7\/16 inches and it is 3\/16 inch thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 206530-1 hinge weigh?\u003c\/strong\u003e The pair weighs 0.336 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting screws included with the 206530-1 hinge?\u003c\/strong\u003e No, fasteners are not included. The hinge is designed to install with six #8 flat head screws that need to be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hinge suitable for saltwater exposure?\u003c\/strong\u003e The Sea-Dog 206530-1 is recommended for freshwater applications rather than direct saltwater exposure, making it best suited for interior cabinet and locker doors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 206530-1 hinge have?\u003c\/strong\u003e It has a chrome plated finish over the die cast zinc body, giving it a chrome silver appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of doors is this hinge designed for?\u003c\/strong\u003e This is a general-purpose door hinge intended for cabinet and locker doors, offering an economical hardware option for interior applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fasteners does the 206530-1 hinge require per pair?\u003c\/strong\u003e Installing the pair of Sea-Dog 206530-1 hinges requires six #8 flat head fasteners total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the 206530-1 door hinge?\u003c\/strong\u003e The 206530-1 door hinge is manufactured by Sea-Dog.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988549218523,"sku":"S-D-206530-1","price":14.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7750.jpg?v=1784422512"},{"product_id":"sea-dog-207735-1-aluminum-lift-gate-butt-hinge-right-side-pair-pontoon-gate-cabinet-locker-and-hatch-hinge","title":"Sea-Dog 207735-1 Aluminum Lift Gate Butt Hinge, Right Side, 2-1\/2 x 2-3\/4 Inch","description":"\u003cp\u003eThe Sea-Dog 207735-1 is a Right side aluminum lift gate butt hinge built for pontoon gates, hatches, and other marine lift-gate applications. It is constructed of aluminum with nylon washers between the leaves, which keep movement quiet and operation smooth compared to unbushed metal-on-metal hinges. The hinge measures 2-1\/2 inches (dimension A) by 1-1\/4 inches (dimension B) by 1-1\/4 inches (dimension C), with an overall length of 2-3\/4 inches (dimension D) and 1\/8 inch material thickness (dimension E); overall product dimensions are 12.5 inches long by 2.75 inches wide. It installs with six #10 round head (RH) fasteners, not included. This is the Right side hinge only -- the mirror-image Left side hinge, Sea-Dog 207730-1, is a separate part number, so confirm which side your gate needs before ordering. It has a silver aluminum finish and weighs 0.22 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 207735-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lift Gate Butt Hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Side:\u003c\/strong\u003e Right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (Leaf Length):\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B (Leaf Width):\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D (Overall Length):\u003c\/strong\u003e 2-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E (Thickness):\u003c\/strong\u003e 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Product Dimensions:\u003c\/strong\u003e 12.5 inches L x 2.75 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #10 RH (round head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Required:\u003c\/strong\u003e Six #10 RH fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Door mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.22 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514207041\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat side does the Sea-Dog 207735-1 hinge fit?\u003c\/strong\u003e The Sea-Dog 207735-1 is the Right side lift gate butt hinge; it is not reversible, so it must be installed on the right side of the gate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a matching Left side hinge?\u003c\/strong\u003e Yes, Sea-Dog 207730-1 is the Left side counterpart to the 207735-1 and is a separate part number, so order the correct side for your gate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 207735-1 hinge made of?\u003c\/strong\u003e It is made of aluminum, with nylon washers fitted between the leaves for quiet, smooth movement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this hinge?\u003c\/strong\u003e The 207735-1 measures 2-1\/2 inches by 1-1\/4 inches by 1-1\/4 inches at the leaves, with a 2-3\/4 inch overall length and 1\/8 inch material thickness; overall product dimensions are 12.5 inches long by 2.75 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fasteners does it take to install the 207735-1, and are they included?\u003c\/strong\u003e Installation of the Sea-Dog 207735-1 requires six #10 RH (round head) fasteners, which are not included with the hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener size does the hinge use?\u003c\/strong\u003e The Sea-Dog 207735-1 uses #10 RH (round head) fasteners for mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 207735-1 hinge weigh?\u003c\/strong\u003e The Sea-Dog 207735-1 weighs 0.22 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this hinge?\u003c\/strong\u003e The UPC for the Sea-Dog 207735-1 Right side lift gate hinge is 035514207041.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this hinge used for?\u003c\/strong\u003e The 207735-1 is a lift gate butt hinge designed for pontoon gates, hatches, and similar marine lift-gate applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the hinge have nylon washers?\u003c\/strong\u003e The nylon washers in the Sea-Dog 207735-1 sit between the hinge leaves to reduce metal-on-metal contact, keeping movement quiet and operation smooth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish and color is the 207735-1 hinge?\u003c\/strong\u003e The Sea-Dog 207735-1 has a silver aluminum finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 207735-1 sold individually or as a pair?\u003c\/strong\u003e The Sea-Dog 207735-1 is sold as a single Right side hinge unit.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988550332635,"sku":"S-D-207735-1","price":16.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6772_bb5ae84f-e12e-4b13-a483-9439f5905b14.jpg?v=1784422538"},{"product_id":"sea-dog-221100-1-anti-rattle-cam-latch-316-stainless-steel-lockable-for-cabinets-doors-hatches","title":"Sea-Dog Anti-Rattle Latch 221100-1, Stainless Steel Cam Latch for Cabinets, Doors and Hatches","description":"\u003cp\u003eThe Sea-Dog Anti-Rattle Latch (221100-1) is an open-mount, center-tensioning cam latch built to keep cabinet doors, hatches, and compartment lids from rattling or working loose underway. The cam-action mechanism pulls the door or hatch tight against its frame as the latch is turned, eliminating the play that causes noise and wear over time. It is constructed of investment cast 316 stainless steel, a marine-grade alloy chosen for its resistance to corrosion in saltwater environments, so the latch holds up to long-term exposure without pitting or rusting.\u003c\/p\u003e\u003cp\u003eBeyond tensioning, the latch includes a locking hole that accepts a padlock with a shank up to 1\/4 inch in diameter, giving boat owners the option to secure cabinets or hatches against unauthorized access. It surface mounts using four #10 flat head fasteners (sold separately), making it a straightforward replacement or new installation for galley cabinets, storage lockers, engine hatches, and similar compartments aboard a boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 221100-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Cabinet Hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock Hole Diameter:\u003c\/strong\u003e 1\/4 inches (maximum padlock shank diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #10 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Required:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514222488\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for cabinets, doors, and hatches; no specific make, model, or year fitment is specified by the manufacturer.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog Anti-Rattle Latch used for?\u003c\/strong\u003e It is a center-tensioning cam latch designed to hold cabinet doors, hatches, and compartment lids tightly closed so they do not rattle or work loose, part number 221100-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 221100-1 latch made from?\u003c\/strong\u003e It is constructed of investment cast 316 stainless steel, a corrosion-resistant marine-grade alloy suited to saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this latch be locked?\u003c\/strong\u003e Yes, the Sea-Dog 221100-1 has a locking hole that accepts a padlock with a shank up to 1\/4 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the anti-rattle latch?\u003c\/strong\u003e The 221100-1 measures 3 inches in length, 1-1\/2 inches in width, and 3\/4 inches in height, with a 1\/4 inch diameter lock hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the latch weigh?\u003c\/strong\u003e The Sea-Dog Anti-Rattle Latch weighs 0.15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 221100-1 latch mounted?\u003c\/strong\u003e It is an open-mount, surface-mount latch that installs with four #10 flat head fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the mounting fasteners included?\u003c\/strong\u003e No, the four #10 flat head fasteners needed to surface mount the 221100-1 latch are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps this latch from rattling compared to a standard latch?\u003c\/strong\u003e The 221100-1 uses a center-tensioning cam action that pulls the door or hatch tight against the frame as it is turned, removing the play that causes rattling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this latch suitable for saltwater use?\u003c\/strong\u003e Yes, because it is made of investment cast 316 stainless steel, the Sea-Dog 221100-1 resists corrosion in marine and saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is the anti-rattle latch designed for?\u003c\/strong\u003e Sea-Dog designed the 221100-1 for cabinets, doors, and hatches aboard a boat.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988550365403,"sku":"S-D-221100-1","price":26.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7101.jpg?v=1784422539"},{"product_id":"sea-dog-221128-heavy-duty-hasp-3-9-16-stamped-304-stainless-steel-locking-hasp-for-lockers-hatches-dock-boxes","title":"Sea-Dog Heavy Duty Hasp, 3-9\/16 Inch, 304 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog Heavy Duty Hasp is a stamped 304 stainless steel security fitting designed to secure lockers, cupboards, chests, and hatch doors against unauthorized opening. It uses a slotted plate that fits over a fixed post: once closed, the plate cannot be lifted free, and it is built to work with a padlock for permanent locking. A key security feature is that all mounting screws are fully concealed when the hasp is closed, so the fasteners cannot be accessed or removed from the outside once the hasp is in the locked position. This measures 3-9\/16 inches overall and installs using seven #6 flat head fasteners (fasteners are not included).\u003c\/p\u003e\u003cp\u003eConstruction is stamped 304 stainless steel throughout, giving the hasp strong resistance to the corrosive effects of saltwater, spray, and marine humidity, making it suitable for long-term exterior use on boats as well as dockside storage such as dock boxes. The hasp is sold individually and is packaged in bulk quantities of 10 for retail display. It shares its slotted-plate-over-post design with the smaller Sea-Dog 221127 Heavy Duty Hasp, while the separate Sea-Dog Swivel Hasp uses a different pad-eye mounting style.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 221128\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Heavy Duty Hasp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Grey (stainless)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (overall length):\u003c\/strong\u003e 3-9\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 2-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #6 Flat Head (not included, seven required for installation)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.147 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514221412\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 221128 Heavy Duty Hasp?\u003c\/strong\u003e It measures 3-9\/16 inches overall (Dimension A), with a width of 2-3\/4 inches (Dimension B), and additional dimensions of 1-3\/16 inches (C), 7\/8 inches (D), and 1\/2 inch (E).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this hasp made of?\u003c\/strong\u003e The Sea-Dog 221128 Heavy Duty Hasp is made of stamped 304 stainless steel, which resists corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the hasp come with mounting screws?\u003c\/strong\u003e No, mounting fasteners are not included. The Sea-Dog 221128 installs using seven #6 flat head screws that the buyer supplies separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this hasp prevent someone from removing it?\u003c\/strong\u003e The hasp uses a slotted plate that fits over a fixed post, so it cannot be lifted free once closed, and all mounting screws are concealed when the hasp is shut, preventing them from being accessed or removed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hasp be locked with a padlock?\u003c\/strong\u003e Yes, the Sea-Dog 221128 is designed to be used in conjunction with a padlock for added security once the slotted plate is fitted over the post.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 221128 and the smaller 221127 hasp?\u003c\/strong\u003e Both are Sea-Dog Heavy Duty Hasps with the same slotted-plate-over-post design and 304 stainless steel construction, but the 221128 measures 3-9\/16 inches overall while the 221127 is a smaller 2-11\/16 inch version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from the Sea-Dog Swivel Hasp?\u003c\/strong\u003e The Sea-Dog 221128 Heavy Duty Hasp mounts over a fixed post, while the separate Swivel Hasp mounts to a swivel pad eye and accepts a padlock bail up to 5\/16 inch; they use different mounting hardware and are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this hasp used for?\u003c\/strong\u003e The Sea-Dog 221128 is intended for securing lockers, cupboards, chests, or hatch doors on a boat or in dockside storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 221128 corrosion resistant?\u003c\/strong\u003e Yes, it is constructed of corrosion resistant stamped 304 stainless steel, suitable for saltwater and marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 221128 hasp weigh?\u003c\/strong\u003e It weighs 0.147 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 221128 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, 221128 is the Sea-Dog manufacturer part number for this Heavy Duty Hasp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 221128 sold as a single unit?\u003c\/strong\u003e Yes, the 221128 hasp is sold individually, though it is packaged in bulk quantities of 10 for retail display.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988550398171,"sku":"S-D-221128","price":14.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7752.jpg?v=1784422541"},{"product_id":"sea-dog-221135-1-heavy-duty-swivel-hasp-flush-mount-stainless-steel-3-1-8","title":"Sea-Dog Heavy-Duty Swivel Hasp, Stainless Steel, 3-1\/8 Inch, Flush Mount","description":"\u003cp\u003eThis Sea-Dog Heavy-Duty Swivel Hasp is a stainless steel flush-mount latch designed to secure lockers, cupboards, chests, and hatch doors aboard a boat. The hasp uses a slotted plate that fits over a swivel pad eye; the swivel eye rotates to act as a temporary lock on its own, or it will accept most standard padlocks for more permanent, secured protection. Because the mounting plate sits flush with the surface, it stays hidden and low-profile when the hasp is closed, avoiding a proud edge that could snag lines, clothing, or gear.\u003c\/p\u003e\u003cp\u003eBuilt from stainless steel, part number 221135-1 is sized 3-1\/8 inches long by 1-1\/8 inches wide, making it a compact fit for cabinet doors, storage chests, and hatch covers where a discreet, corrosion-resistant latch is needed. It is a straightforward drop-in hardware upgrade for anyone replacing a worn or rusted hasp, or adding secure closures to onboard storage.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 221135-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 3.88 x 5.81 x 0.88 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.24 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Flush Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514221115\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Cabinet Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 221135-1 hasp used for?\u003c\/strong\u003e The Sea-Dog 221135-1 is a heavy-duty swivel hasp used to secure lockers, cupboards, chests, or hatch doors on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hasp made of stainless steel?\u003c\/strong\u003e Yes, part number 221135-1 is constructed of stainless steel for corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this Sea-Dog swivel hasp?\u003c\/strong\u003e The hasp measures 3-1\/8 inches long by 1-1\/8 inches wide, with overall packaged dimensions of 3.88 x 5.81 x 0.88 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 221135-1 hasp weigh?\u003c\/strong\u003e It weighs 0.24 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hasp accept a padlock?\u003c\/strong\u003e Yes, the swivel eye on the 221135-1 hasp will accept most standard padlocks for permanent, secured closure, and can also rotate to act as a temporary lock on its own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the mounting plate visible when the hasp is closed?\u003c\/strong\u003e No, the 221135-1 is a flush-mount design, so the mounting plate is hidden from view once the hasp is closed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does this hasp mount to?\u003c\/strong\u003e It is designed with a slotted plate that fits over a swivel pad eye for mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of applications is this hasp best suited for?\u003c\/strong\u003e This Sea-Dog swivel hasp is well suited for securing lockers, cupboards, storage chests, and hatch doors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 221135-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, 221135-1 is the Sea-Dog manufacturer part number for this heavy-duty swivel hasp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 221135-1 hasp have?\u003c\/strong\u003e It is finished in stainless steel, which resists corrosion in marine and outdoor conditions.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988550430939,"sku":"S-D-221135-1","price":15.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8268.jpg?v=1784422545"},{"product_id":"sea-dog-221130-1-swivel-hasp-stamped-304-stainless-steel-2-11-16-x-1-1-16-concealed-screws-padlock-ready","title":"Sea-Dog 221130-1 Swivel Hasp, Stamped 304 Stainless Steel, 2-11\/16 Inch","description":"\u003cp\u003eThe Sea-Dog 221130-1 Swivel Hasp is a stamped 304 stainless steel security hasp built for doors, cabinets, dock boxes, and lockers aboard boats or in marine environments. The hasp features a slotted plate that fits over a swivel pad eye; the swivel eye rotates to act as a temporary lock on its own, or it will accept a padlock with a bail up to 5\/16 inch in diameter for more permanent protection. For added security, all mounting screws are concealed once the hasp is closed, preventing tampering or removal while it is locked down. The hasp installs with eight #8 flat head fasteners (fasteners not included) and is sized at 2-11\/16 inches by 1-1\/16 inches, making it a compact, low-profile option for smaller doors and lids. Constructed of corrosion resistant stamped 304 stainless steel, it is built to withstand marine environments including saltwater exposure. This is a straight (non-heavy-duty, non-angled) swivel hasp design intended for lighter-duty securing applications compared to the heavier angle-style swivel hasps in the same product family.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 221130-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (Length):\u003c\/strong\u003e 2-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 2-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #8 FH (flat head), 8 required, not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Padlock Bail Diameter:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.118 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514221023\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 221130-1 swivel hasp made of?\u003c\/strong\u003e It is made of stamped 304 stainless steel, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size padlock will fit the Sea-Dog 221130-1 hasp?\u003c\/strong\u003e The swivel eye on part 221130-1 accepts padlocks with a bail up to 5\/16 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a padlock to use this hasp?\u003c\/strong\u003e No, the swivel eye on the 221130-1 rotates on its own to act as a temporary lock; a padlock is only needed for more permanent security.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the mounting screws included with the 221130-1 swivel hasp?\u003c\/strong\u003e No, the fasteners are not included. Installation requires eight #8 flat head (FH) screws, purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 221130-1 swivel hasp?\u003c\/strong\u003e The hasp measures 2-11\/16 inches (A) by 2-1\/16 inches (B), with a thickness\/depth of 1-1\/16 inches (C), a 7\/8 inch dimension (D), and a 5\/16 inch dimension (E).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this swivel hasp typically used?\u003c\/strong\u003e The 221130-1 is designed for doors, cabinets, dock boxes, and lockers, particularly in marine settings where corrosion resistance matters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 221130-1 hasp weigh?\u003c\/strong\u003e It weighs 0.118 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounting screws does this hasp use?\u003c\/strong\u003e Eight #8 FH (flat head) screws are used to install the 221130-1 swivel hasp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the mounting screws visible once the hasp is locked?\u003c\/strong\u003e No, all mounting screws on the 221130-1 are concealed when the hasp is closed, adding a layer of tamper resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 221130-1 swivel hasp and the heavy duty swivel hasp (221136-1)?\u003c\/strong\u003e The 221130-1 is a smaller, straight swivel hasp measuring 2-11\/16 inches by 1-1\/16 inches and installs with eight #8 FH fasteners, while the heavy duty version is a larger angle-style hasp measuring 3-3\/4 inches and installs with four #8 FH fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 221130-1 suitable for saltwater use?\u003c\/strong\u003e Yes, it is constructed of corrosion resistant stamped 304 stainless steel, making it suitable for saltwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 'swivel' in swivel hasp refer to on part 221130-1?\u003c\/strong\u003e The 221130-1 has a slotted plate that fits over a swivel pad eye, and the eye itself rotates, allowing the hasp to swing into a locked position.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988550463707,"sku":"S-D-221130-1","price":13.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7753.jpg?v=1784422549"},{"product_id":"sea-dog-221150-1-locking-hasp-3-1-8-304-stainless-steel-concealed-screw-keyed-marine-hasp-for-lockers-hatches-chests","title":"Sea-Dog Locking Hasp 221150-1, 3-1\/8 Inch, 304 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog Locking Hasp (221150-1) is a stamped 304 stainless steel hasp with a built-in locking mechanism that requires a key to actuate, preventing accidental lock-out. When the key is not in use, it functions as a conventional hasp for quick, everyday access. Two matching keys are included, though key patterns are random from hasp to hasp, so keys are not interchangeable between different units.\u003c\/p\u003e\u003cp\u003eThis hasp is ideal for securing lockers, cupboards, chests, or hatches aboard a boat or in other marine and marine-adjacent storage applications. For added security, all mounting screws are concealed once the hasp is closed, keeping fasteners inaccessible while locked. Installation requires seven #8 flat head fasteners, which are not included. Construction from corrosion resistant stamped 304 stainless steel makes it suitable for saltwater and marine environments where rust resistance is a priority.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 221150-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Stamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions (A x B x C x D):\u003c\/strong\u003e 3-1\/8 inches x 2-1\/8 inches x 1-1\/4 inches x 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #8 flat head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Keys Included:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Key-actuated, prevents lock-out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Concealed screws when hasp is closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.224 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal mounting to lockers, cupboards, chests, or hatches; not model-specific.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog Locking Hasp 221150-1 used for?\u003c\/strong\u003e It is designed for securing lockers, cupboards, chests, or hatches, functioning as a locking hasp that requires a key to actuate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 221150-1 hasp come with keys?\u003c\/strong\u003e Yes, two matching keys are included with the Sea-Dog Locking Hasp 221150-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the keys for this hasp interchangeable with other Sea-Dog hasps?\u003c\/strong\u003e No, key availability is random from hasp to hasp, so the keys included with one 221150-1 unit will not necessarily open another.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog Locking Hasp 221150-1?\u003c\/strong\u003e The 221150-1 measures 3-1\/8 inches (A) by 2-1\/8 inches (B) by 1-1\/4 inches (C) by 3\/4 inches (D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 221150-1 hasp made from?\u003c\/strong\u003e It is constructed of corrosion resistant stamped 304 stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting screws included with the hasp?\u003c\/strong\u003e No, the Sea-Dog Locking Hasp 221150-1 installs with seven #8 flat head fasteners that are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the hasp be used without the key?\u003c\/strong\u003e Yes, the 221150-1 functions as a conventional hasp when the key is not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a larger size available?\u003c\/strong\u003e Yes, Sea-Dog also offers the 221155-1 Locking Hasp, which measures 4-1\/8 inches by 3-1\/8 inches by 1-1\/4 inches by 3\/4 inches and is a separate part number from the 221150-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this hasp add extra security?\u003c\/strong\u003e All mounting screws on the 221150-1 are concealed when the hasp is closed, preventing tampering with the fasteners while the hasp is secured.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog Locking Hasp 221150-1 weigh?\u003c\/strong\u003e It weighs 0.224 pounds.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988550562011,"sku":"S-D-221150-1","price":23.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7756.jpg?v=1784422578"},{"product_id":"sea-dog-221243-1-heavy-duty-barrel-bolt-investment-cast-316-stainless-steel-for-doors-gates-and-cabinets","title":"Sea-Dog Heavy Duty Barrel Bolt 221243-1, 3-3\/4 Inch, 316 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog Heavy Duty Barrel Bolt, part number 221243-1, is a surface-mounted slide bolt built for securing doors, gates, and cabinets aboard boats and in other corrosive environments. It is investment cast from 316 stainless steel, a grade chosen for its resistance to saltwater and marine air corrosion, giving the bolt long-term durability in exposed applications. This barrel bolt can serve as either a primary locking mechanism or as a back-up lock alongside another latch, and it is versatile enough for vertical, horizontal, left-hand, or right-hand mounting. When installed vertically, a notch machined into the barrel holds the bolt securely in the locked position, preventing it from sliding open on its own. The bolt measures 3-3\/4 inches long, 1-1\/2 inches wide, and 5\/8 inch high, making it a compact fit for smaller doors, hatches, and cabinet faces where a heavier-duty bolt than a standard cabinet latch is needed. It surface mounts using #8 flat head fasteners, which are not included and must be sourced separately to match the mounting surface. The part is sold individually with a standard pack quantity of 5 each for buyers outfitting multiple doors or cabinets. Its stainless steel construction and simple slide mechanism make it easy to install and operate without special tools.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 221243-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Cabinet Hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength (A):\u003c\/strong\u003e 3-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth (B):\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight (C):\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #8 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack Quantity:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514223751\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 221243-1 barrel bolt made of?\u003c\/strong\u003e The 221243-1 barrel bolt is investment cast from 316 stainless steel, a corrosion-resistant grade suited to saltwater and marine air exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this barrel bolt?\u003c\/strong\u003e The Sea-Dog 221243-1 measures 3-3\/4 inches long, 1-1\/2 inches wide, and 5\/8 inch high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this barrel bolt be mounted horizontally as well as vertically?\u003c\/strong\u003e Yes, the 221243-1 barrel bolt is designed for vertical, horizontal, left-hand, or right-hand mounting applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the barrel bolt lock itself in place when mounted vertically?\u003c\/strong\u003e When installed vertically, a notch in the barrel of the 221243-1 holds the bolt in the locked position so it will not slide open on its own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting screws included with this barrel bolt?\u003c\/strong\u003e No, the Sea-Dog 221243-1 surface mounts with #8 flat head fasteners that are sold separately and not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 221243-1 barrel bolt weigh?\u003c\/strong\u003e This barrel bolt weighs 0.28 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a barrel bolt used for on a boat?\u003c\/strong\u003e A barrel bolt like the Sea-Dog 221243-1 is used to secure doors, gates, and cabinets, functioning as either the primary lock or a back-up locking system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many barrel bolts come in a standard pack?\u003c\/strong\u003e The Sea-Dog 221243-1 has a standard pack quantity of 5 each, though it can also be purchased individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 221243-1 barrel bolt rated for outdoor or marine use?\u003c\/strong\u003e Yes, its investment cast 316 stainless steel construction is corrosion resistant, making the 221243-1 suitable for marine and other outdoor, corrosive environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fasteners does the 221243-1 barrel bolt require?\u003c\/strong\u003e It is countersunk for #8 flat head fasteners, which need to be purchased separately from the Sea-Dog 221243-1 bolt itself.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988550594779,"sku":"S-D-221243-1","price":21.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6336.jpg?v=1784422582"},{"product_id":"sea-dog-heavy-duty-barrel-bolt-4-1-4-investment-cast-316-stainless-steel-surface-mount-slide-latch-for-doors-gates-cabinets","title":"Sea-Dog Barrel Bolt 221244-1, 4-1\/4 Inch Investment Cast 316 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog 221244-1 Barrel Bolt is a 4-1\/4 inch surface-mounted locking bolt built from investment cast 316 stainless steel for superior corrosion resistance in marine environments. It provides additional security as either a primary or back-up locking system on doors, gates, drawers, and cabinets, and is suitable for vertical, horizontal, left-hand, or right-hand applications. In vertical installations, a notch in the barrel holds the bolt securely in the locked position, preventing accidental release.\u003c\/p\u003e\u003cp\u003eConstruction is investment cast rather than stamped, giving the bolt added strength and a refined, corrosion-resistant finish that holds up to saltwater exposure. The bolt measures 4-1\/4 inches in overall length (A), 1-1\/2 inches in width (B), and 5\/8 inch in height (C), and installs with #8 flat head fasteners (not included). This size sits in the middle of Sea-Dog's barrel bolt lineup, between the smaller 221243-1 and the larger 221255-1, so buyers needing a different footprint can order the matching part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 221244-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength (A):\u003c\/strong\u003e 4-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth (B):\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight (C):\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #8 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.33 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Vertical, horizontal, left-hand, or right-hand\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 221244-1 barrel bolt?\u003c\/strong\u003e The 221244-1 barrel bolt measures 4-1\/4 inches long (A), 1-1\/2 inches wide (B), and 5\/8 inch high (C).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this barrel bolt made from?\u003c\/strong\u003e It is made from investment cast 316 stainless steel, chosen for its corrosion resistance in marine and coastal environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 221244-1 barrel bolt be mounted on either side of a door?\u003c\/strong\u003e Yes, this barrel bolt is appropriate for vertical, horizontal, left-hand, or right-hand applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the barrel bolt include mounting screws?\u003c\/strong\u003e No, the Sea-Dog 221244-1 is countersunk for #8 flat head fasteners, but the fasteners themselves are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the bolt stay locked in vertical installations?\u003c\/strong\u003e A notch in the barrel of the 221244-1 holds the bolt securely in the locked position when mounted vertically.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of this barrel bolt?\u003c\/strong\u003e The Sea-Dog 221244-1 barrel bolt weighs 0.33 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is this barrel bolt suited for?\u003c\/strong\u003e It is designed for doors, gates, and cabinets, working as either a primary or back-up locking system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many barrel bolts come in a package?\u003c\/strong\u003e The 221244-1 is packaged in a standard pack of 5 each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 221244-1 the same size as other Sea-Dog barrel bolts?\u003c\/strong\u003e No, the 221244-1 is the mid-size option in the lineup at 4-1\/4 inches long, sitting between the smaller 3-3\/4 inch 221243-1 and the larger 6-1\/2 inch 221255-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this barrel bolt suitable for use near saltwater?\u003c\/strong\u003e Yes, the investment cast 316 stainless steel construction of the Sea-Dog 221244-1 resists corrosion in saltwater and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 221244-1 barrel bolt installed?\u003c\/strong\u003e It is a surface-mounted bolt that installs onto the mounting surface using #8 flat head fasteners driven through the countersunk mounting holes.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988550627547,"sku":"S-D-221244-1","price":23.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6336_1ee86390-bd60-48fa-a6c2-037316cad1a6.jpg?v=1784422588"},{"product_id":"sea-dog-heavy-duty-swivel-hasp-angle-style-304-stainless-steel-3-3-4-in-accepts-padlocks-mpn-221136-1","title":"Sea-Dog 221136-1 Heavy Duty Swivel Hasp, Angle Style, 304 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog 221136-1 Heavy Duty Swivel Hasp is a stamped 304 stainless steel latch built to secure lockers, cupboards, chests, and hatch doors aboard a boat or in any marine environment. The hasp features a slotted plate that fits over a swivel pad eye; the swivel eye itself rotates into place, acting as a temporary lock on its own, while also accepting most standard padlocks for more permanent, secure protection when needed. The flush mounting plate design means the plate stays hidden and flush against the surface when the hasp is closed, giving a clean, low-profile finished look rather than a bulky protruding latch.\u003c\/p\u003e\u003cp\u003eBuilt in the angle style configuration, this hasp is constructed entirely of corrosion resistant stamped 304 stainless steel, making it well suited to withstand saltwater spray, humidity, and general marine exposure without rusting or degrading over time. It installs with four #8 flat head fasteners (fasteners not included), so any standard #8 FH screw on hand can be used for mounting. Because it is a compact hardware fitting rather than an engine or drivetrain component, it is a straightforward drop-in upgrade or replacement for securing storage compartments, cabinets, and access panels throughout a boat's interior or deck storage areas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 221136-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Stamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 3-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 2-5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #8 FH (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.252 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514221443\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 221136-1 swivel hasp used for?\u003c\/strong\u003e It is used to secure lockers, cupboards, chests, and hatch doors, with a slotted plate that fits over a swivel pad eye to hold the door or lid closed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hasp accept a padlock?\u003c\/strong\u003e Yes, the swivel eye on the 221136-1 rotates to act as a temporary lock on its own, and it also accepts most standard padlocks for more permanent security.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 221136-1 hasp made from?\u003c\/strong\u003e It is made of corrosion resistant stamped 304 stainless steel, which holds up well to saltwater spray and general marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with this hasp?\u003c\/strong\u003e No, the Sea-Dog 221136-1 installs with four #8 flat head (FH) fasteners that are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat style is the 221136-1 swivel hasp?\u003c\/strong\u003e This is the angle style version of the Sea-Dog heavy duty swivel hasp, distinguished from Sea-Dog's straight bar hasp option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 221136-1 swivel hasp?\u003c\/strong\u003e The hasp measures 3-3\/4 inches at dimension A, 2-5\/16 inches at B, 1-1\/8 inches at C, 15\/16 inches at D, and 5\/16 inches at E.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 221136-1 hasp weigh?\u003c\/strong\u003e It weighs 0.252 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the mounting plate visible when the hasp is closed?\u003c\/strong\u003e No, the 221136-1 has a flush mounting plate that stays hidden once the hasp is closed, giving a clean, low-profile look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 221136-1 different from Sea-Dog's straight bar hasp?\u003c\/strong\u003e The 221136-1 is the angle style swivel hasp that uses a rotating swivel eye over a pad eye, while Sea-Dog's straight bar hasp (part 221140) uses a fixed eye staple accepting padlocks with up to a 7\/16 inch bail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this hasp?\u003c\/strong\u003e The package includes the Sea-Dog 221136-1 swivel hasp itself; mounting fasteners are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog part?\u003c\/strong\u003e Yes, 221136-1 is the genuine Sea-Dog manufacturer part number for this heavy duty angle style swivel hasp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hasps come in a standard pack?\u003c\/strong\u003e The Sea-Dog 221136-1 is packed in a standard quantity of 10 each.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988550725851,"sku":"S-D-221136-1","price":30.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8268_eb15ebf5-2a57-4d83-b56b-63803484b3c2.jpg?v=1784422596"},{"product_id":"sea-dog-90-degree-angle-bracket-3-inch-stamped-304-stainless-steel-corner-brace-2-pack-mpn-221315-1","title":"Sea-Dog 90 Degree Angle Bracket, 3 x 3 Inch, 304 Stainless Steel, Sold as a Pair, 221315-1","description":"\u003cp\u003eThe Sea-Dog 221315-1 is a 90 degree angle bracket used as a corner brace to reinforce the inside right angle of corner joints on boats, docks, and marine furniture. It is constructed of corrosion resistant stamped 304 stainless steel, making it suitable for saltwater and freshwater environments where standard steel hardware would corrode. The bracket measures 3 inches by 3 inches with a depth of 1-13\/16 inches on each leg, and each mounting hole is sized for a 9\/16 inch fastener. It installs with four #8 flat head fasteners per bracket (fasteners are not included). This bracket is sold as a pair, giving you two brackets per package so you can reinforce both sides of a corner joint or complete two separate installations. Typical uses include reinforcing corner joints on cabinetry, shelving, storage boxes, hatch frames, and other structural corners aboard a boat where added rigidity and corrosion resistance are needed. The stamped, low-profile design keeps the bracket compact so it sits flush against the corner without adding significant bulk.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 221315-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Stamped, corrosion resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-13\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-13\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Hole Size:\u003c\/strong\u003e 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Fastener:\u003c\/strong\u003e #8 Flat Head Screw (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.152 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 2 brackets (1 pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514221597\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 221315-1 angle bracket used for?\u003c\/strong\u003e The 221315-1 is a 90 degree angle bracket used as a corner brace to reinforce the inside right angle of corner joints, such as those found in cabinetry, shelving, and storage boxes aboard a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 221315-1 angle bracket made from?\u003c\/strong\u003e It is made from stamped 304 stainless steel, which resists corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many brackets come in a package?\u003c\/strong\u003e The Sea-Dog 221315-1 is sold as a pair, so each package includes 2 angle brackets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this angle bracket?\u003c\/strong\u003e The 221315-1 measures 3 inches by 3 inches, with each leg extending 1-13\/16 inches from the corner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install this bracket?\u003c\/strong\u003e Each 221315-1 bracket installs with four #8 flat head fasteners; the fasteners are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the mounting holes on the 221315-1?\u003c\/strong\u003e The mounting holes are sized for a 9\/16 inch fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 221315-1 bracket weigh?\u003c\/strong\u003e Each 221315-1 angle bracket weighs 0.152 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 221315-1 bracket rust in saltwater?\u003c\/strong\u003e No, it is constructed of corrosion resistant 304 stainless steel, which is designed to hold up in saltwater and freshwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 221315-1 bracket flat or angled?\u003c\/strong\u003e It is a 90 degree angle bracket, shaped to fit and reinforce an inside right angle corner joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the fasteners included with the 221315-1?\u003c\/strong\u003e No, the #8 flat head fasteners needed to install the 221315-1 angle bracket are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 221315-1 be used outside of boats?\u003c\/strong\u003e Yes, this stamped 304 stainless steel angle bracket can reinforce any inside corner joint that needs corrosion resistant hardware, on or off the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 221315-1 different from Sea-Dog's other angle bracket sizes?\u003c\/strong\u003e The 221315-1 is the 3 inch by 3 inch size in Sea-Dog's angle bracket line, which also includes smaller 1-1\/2 inch and 2-3\/8 inch versions with the same 304 stainless steel construction.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988550824155,"sku":"S-D-221315-1","price":7.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6337_23b2c28e-3719-4b15-bf3b-323ad62f6feb.jpg?v=1784422628"},{"product_id":"sea-dog-221670-1-door-stop-button-304-stainless-steel-and-nylon-surface-mount-comparable-to-perko-1217","title":"Sea-Dog Door Stop Button 221670-1, Stainless Steel and Nylon, Comparable to Perko 1217","description":"\u003cp\u003eThe Sea-Dog Door Stop Button, part number 221670-1, is a simple, low-profile hardware piece designed to hold cabin and locker doors closed aboard a boat or in similar marine and RV applications. It pairs a stamped 304 stainless steel body with an injection molded nylon insert, giving it corrosion resistance on the exposed metal surface while the nylon component provides a smooth, quiet catch action. The button surface mounts flush using four #8 flat head fasteners (fasteners not included), keeping the installation clean and low-profile against the door or frame surface.\u003c\/p\u003e\u003cp\u003eThis design is comparable to the Perko #1217 door button, but does not include a spring, so buyers who need spring-loaded operation should confirm that difference before ordering. It is sold individually, making it easy to order the exact quantity needed for a single door or to replace one damaged unit without buying a multi-pack. At 0.108 pounds, it is a lightweight fitting sized for cabinetry, lockers, and interior doors rather than heavy exterior hatches.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 221670-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Door Stop Button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped 304 Stainless Steel \/ Injection Molded Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Stainless Steel, Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 2-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension F:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #8 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.108 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514221399\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold Per:\u003c\/strong\u003e Each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal door stop button for cabin doors, cabinet doors, and lockers requiring a surface mounted stop; not specific to a particular boat make or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 221670-1 used for?\u003c\/strong\u003e The Sea-Dog 221670-1 Door Stop Button is a surface mounted catch used to hold a cabin, cabinet, or locker door closed on a boat or similar interior application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Door Stop Button made of?\u003c\/strong\u003e It is constructed of stamped 304 stainless steel combined with an injection molded nylon component, giving the Sea-Dog 221670-1 corrosion resistance along with smooth catch action.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 221670-1 come with a spring like the Perko 1217?\u003c\/strong\u003e No, the Sea-Dog 221670-1 is comparable to the Perko #1217 door button but is made without a spring, so it operates differently than a spring loaded version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with this door button?\u003c\/strong\u003e No, the Sea-Dog 221670-1 mounts with four #8 flat head fasteners that are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Door Stop Button weigh?\u003c\/strong\u003e The Sea-Dog 221670-1 Door Stop Button weighs 0.108 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 221670-1 sold individually or in a pack?\u003c\/strong\u003e The Sea-Dog Door Stop Button, part number 221670-1, is sold per each rather than as a multi-pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog Door Stop Button?\u003c\/strong\u003e The 221670-1 measures 1-3\/8 inches at dimension A, 3\/4 inches at both B and C, 1-1\/4 inches at D, 2-3\/8 inches at E, and 2 inches at F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this door button rust over time?\u003c\/strong\u003e The stainless steel and nylon construction of the Sea-Dog 221670-1 is designed to resist corrosion, making it suitable for marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The UPC for the Sea-Dog 221670-1 Door Stop Button is 035514221399.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this door button interchangeable with the Perko 1217?\u003c\/strong\u003e The Sea-Dog 221670-1 is comparable to the Perko #1217 in fit and function, with the key difference being that the Sea-Dog version does not include a spring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Door Stop Button have?\u003c\/strong\u003e The Sea-Dog 221670-1 has a stainless steel exterior finish with a silver, polished appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 221670-1 genuine Sea-Dog hardware or aftermarket?\u003c\/strong\u003e The 221670-1 is a genuine Sea-Dog part, manufactured by Sea-Dog Line rather than being an aftermarket reproduction.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988550856923,"sku":"S-D-221670-1","price":7.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7762.jpg?v=1784422628"},{"product_id":"sea-dog-221700-1-sliding-door-stop-investment-cast-316-stainless-steel-comparable-to-perko-1217-without-spring","title":"Sea-Dog Sliding Door Stop 221700-1, Investment Cast 316 Stainless Steel with Black Polymer Coating","description":"\u003cp\u003eThe Sea-Dog Sliding Door Stop (221700-1) is a hinged hardware fitting designed to be installed adjacent to a track to hold sliding windows or pocket doors open or closed. The arm flips over into position for a simple, secure hold and flips back out of the way when not needed. Built from investment cast 316 stainless steel, it resists corrosion in marine and coastal environments. The stop itself carries a black polymer coating that protects the window or door surface from direct contact with the metal fitting, preventing scuffing and scratching at the contact point. Installation is straightforward: the stop mounts with two #8 flat head fasteners (fasteners are not included and must be sourced separately). The fitting is sized with an overall length of 2-7\/8 inches and a width of 1-1\/4 inches, with the additional mounting dimensions of 1\/4 inch, 9\/16 inch, and 7\/8 inch as detailed below. Each unit weighs 0.18 pounds, and the Sea-Dog 221700-1 is sold in a standard pack of 5 each. This is a compact, functional piece of cabin or cabinetry hardware suited to boats, RVs, and other applications using sliding doors or windows on a track.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 221700-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black polymer coating on stop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (Length):\u003c\/strong\u003e 2-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #8 FH (flat head), not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.18 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514221924\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog Sliding Door Stop 221700-1 used for?\u003c\/strong\u003e The Sea-Dog 221700-1 is a hinged door stop installed adjacent to a track to hold sliding windows or pocket doors open or closed. The arm flips over to engage and holds the door or window securely in position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 221700-1 door stop made of?\u003c\/strong\u003e It is made of investment cast 316 stainless steel, which resists corrosion and is well suited to marine and coastal environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 221700-1 have any coating to protect the door or window surface?\u003c\/strong\u003e Yes, the stop portion of the 221700-1 has a black polymer coating that protects the window or door from direct contact with the bare metal fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install the Sea-Dog Sliding Door Stop?\u003c\/strong\u003e The 221700-1 installs with two #8 flat head (FH) fasteners. These fasteners are not included and need to be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog Sliding Door Stop 221700-1?\u003c\/strong\u003e The 221700-1 measures 2-7\/8 inches (dimension A) by 1-1\/4 inches (dimension B), with additional reference dimensions of 1\/4 inch (C), 9\/16 inch (D), and 7\/8 inch (E).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 221700-1 weigh?\u003c\/strong\u003e Each Sea-Dog Sliding Door Stop weighs 0.18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many units are in a package of the Sea-Dog 221700-1?\u003c\/strong\u003e The 221700-1 is sold in a standard pack of 5 each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog Sliding Door Stop corrosion resistant?\u003c\/strong\u003e Yes, because it is investment cast from 316 stainless steel, the 221700-1 resists corrosion, making it suitable for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the arm on the Sea-Dog 221700-1 work?\u003c\/strong\u003e The 221700-1 has a hinged arm that flips over into place to hold a sliding window or pocket door open or closed, and flips back out of the way when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog Sliding Door Stop 221700-1?\u003c\/strong\u003e The UPC for the Sea-Dog 221700-1 Sliding Door Stop is 035514221924.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should the Sea-Dog 221700-1 be mounted?\u003c\/strong\u003e The 221700-1 is designed to be installed adjacent to the track of a sliding window or pocket door so the hinged arm can engage and hold it in place.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988550889691,"sku":"S-D-221700-1","price":26.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7103.jpg?v=1784422633"},{"product_id":"sea-dog-221710-1-door-stop-and-catch-investment-cast-316-stainless-steel-spring-loaded-latch","title":"Sea-Dog Door Stop and Catch 221710-1, Investment Cast 316 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog Door Stop and Catch (221710-1) holds a door securely against its rubber stop, effectively reducing the rattling common with most standard door hooks. A spring-loaded latch engages and releases the door quickly and easily, giving one-handed operation without fumbling for a hook-and-eye catch. The body is investment cast from 316 stainless steel, a grade chosen for its resistance to corrosion in marine and coastal environments, making this catch suitable for boat interiors as well as other applications where a durable, rattle-free door latch is needed.\u003c\/p\u003e\u003cp\u003eThis is the smaller of two sizes in the Sea-Dog door stop and catch line, measuring 2 inches by 2-1\/2 inches. It installs with five #6 flat head fasteners (fasteners not included), so mounting hardware should be sourced separately to match the door and frame material.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 221710-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Door Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 11\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #6 FH (flat head), not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.426 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514221092\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 221710-1 door stop and catch made of?\u003c\/strong\u003e It is investment cast from 316 stainless steel, a corrosion-resistant grade suited to marine and coastal use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the latch on this door catch work?\u003c\/strong\u003e A spring-loaded latch holds the door securely against the rubber stop and allows quick, easy release with light pressure, cutting down on the rattling common with standard door hooks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 221710-1 door stop and catch?\u003c\/strong\u003e The Sea-Dog 221710-1 measures 2 inches (dimension A) by 2-1\/2 inches (dimension B), with a C dimension of 11\/16 inch and a D dimension of 1-3\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this door stop and catch weigh?\u003c\/strong\u003e The Sea-Dog 221710-1 weighs 0.426 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install the 221710-1?\u003c\/strong\u003e It installs with five #6 flat head (FH) fasteners; the fasteners are not included and should be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 221710-1 sold as a single unit or in a pack?\u003c\/strong\u003e The 221710-1 is packed in a standard pack of 5 each from the manufacturer, though individual purchase quantity depends on how it is offered for sale.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does this door catch have?\u003c\/strong\u003e The Sea-Dog 221710-1 has a silver stainless steel finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this catch rust or corrode on a boat?\u003c\/strong\u003e No, because the Sea-Dog 221710-1 is investment cast 316 stainless steel, which is corrosion resistant and intended for marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 221710-1 and the 221715-1 door stop and catch?\u003c\/strong\u003e Both are Sea-Dog investment cast 316 stainless steel door stops and catches sharing the same 2 inch A dimension, but the 221715-1 has a longer 4 inch B dimension compared to the 2-1\/2 inch B dimension on the 221710-1, making it a different size for larger door hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 221710-1 mount to the door or the wall?\u003c\/strong\u003e It is a door-mounted catch that holds the door against a rubber stop, rather than a wall-mounted unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the '1' at the end of the part number 221710-1 mean?\u003c\/strong\u003e 221710-1 is the individual unit part number under the base catalog number 221710 for this Sea-Dog door stop and catch.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988550922459,"sku":"S-D-221710-1","price":37.16,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7763.jpg?v=1784422641"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/51LJIukYMSL.jpg?v=1785357508","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-boat-hardware-fittings.oembed?page=3","provider":"Good Vibes Marina","version":"1.0","type":"link"}