{"title":"Boat Covers \u0026 Shrink Wrap","description":null,"products":[{"product_id":"attwood-10795-4-deluxe-boat-cover-support-system-telescoping-pole-kit-for-boats-up-to-19-feet","title":"Attwood 10795-4 Deluxe Boat Cover Support System, Fits Boats Up to 19 Feet","description":"\u003cp\u003eThe Attwood Deluxe Boat Cover Support System (10795-4) is designed to elevate a boat cover so rainwater and debris run off instead of pooling in the center. Standing water on a cover adds weight, promotes mildew, and shortens the cover's usable life; this support system is built to prevent that by forming a double ridgeline underneath the cover using a telescoping center pole, a bow spreader, and poly web straps. Attwood states the system can extend the life of a boat cover by as much as 50 percent by keeping water from accumulating on top of it.\u003c\/p\u003e\u003cp\u003eThe 1-inch diameter aluminum center pole telescopes from 28 inches up to 48 inches tall, so it can be adjusted to the profile of the boat and cover. The pole rests on a rubber foot to protect the boat's surface, while the bow spreader and pole work together with the poly web straps to create a peaked, tent-like ridge under the cover. The 1-inch wide black poly web straps attach to the stern using non-marring hooks, keeping the whole system secure without damaging gelcoat or upholstery. This support system is intended for boats up to 19 feet in length.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 10795-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Boat cover support system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Length Compatibility:\u003c\/strong\u003e Up to 19 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Pole Height Range:\u003c\/strong\u003e 28 inches to 48 inches (telescoping)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Pole Diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Pole Material:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Width:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Material:\u003c\/strong\u003e Black poly webbing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Attachment:\u003c\/strong\u003e Non-marring hooks at the stern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 11.5 x 28.25 x 6.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 048903107952\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBoats up to 19 feet in length\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boat sizes does the Attwood 10795-4 cover support system fit?\u003c\/strong\u003e The Attwood 10795-4 Deluxe Boat Cover Support System is intended for boats up to 19 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow tall does the center pole adjust?\u003c\/strong\u003e The telescoping center pole on the 10795-4 adjusts from 28 inches up to 48 inches tall, letting it be set to match the boat's cover profile.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pole made of?\u003c\/strong\u003e It is a 1-inch diameter aluminum pole that rests on a rubber foot to protect the boat's finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this support system attach to the boat?\u003c\/strong\u003e The 1-inch wide black poly web straps included with the 10795-4 attach to the stern using non-marring hooks, so no drilling or hardware installation is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does a boat cover need a support system like this?\u003c\/strong\u003e Without support, a boat cover can sag in the middle and let rainwater pool on top, adding weight and promoting mildew. The 10795-4 forms a double ridgeline under the cover so water runs off instead of collecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this really extend the life of my boat cover?\u003c\/strong\u003e Attwood states the 10795-4 can extend a cover's life by as much as 50 percent by preventing water accumulation on top of the cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Attwood 10795-4?\u003c\/strong\u003e The system includes a telescoping aluminum center pole, a bow spreader, and 1-inch wide black poly web straps with non-marring stern hooks that together form the double-ridgeline support structure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions and weight of this product?\u003c\/strong\u003e The Attwood 10795-4 measures 11.5 x 28.25 x 6.25 inches and weighs 2.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this work with any boat cover?\u003c\/strong\u003e The 10795-4 is designed as a universal support system for boat covers on boats up to 19 feet, using straps and a center pole rather than cover-specific mounting points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the strap hardware damage the boat's gelcoat?\u003c\/strong\u003e No. The poly web straps on the 10795-4 use non-marring hooks at the stern attachment points, designed to avoid scratching or marring the boat's surface.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989663592667,"sku":"ATT-10795-4","price":41.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81-UGEd551L.jpg?v=1784486391"},{"product_id":"taylor-made-11976-boat-cover-support-pole-base-pad-grey-epdm-non-slip-swivel-base-for-7-8-in-support-poles","title":"Taylor Made Products Boat Cover Support Pole Base Pad, Grey, Fits 7\/8 Inch Diameter Poles, Compatible with 11991 \u0026 11992","description":"\u003cp\u003eThis Taylor Made Products base pad replaces the traditional crutch tip on a boat cover support pole, giving the pole a stable, non-slip foundation on deck. It is built for use with any 7\/8 inch diameter support pole and swaps on in place of the pole's existing bottom tip. The pad is molded from EPDM, a rubber compound chosen for the added friction it provides against the deck surface, which helps keep the pole from sliding or walking out of position while the cover is up. Because EPDM distributes pressure evenly across the pad rather than concentrating it at a single point the way a crutch tip does, it reduces the risk of the pole denting or marking the deck under load.\u003c\/p\u003e\u003cp\u003eA built-in swivel head lets the pole pivot and settle at the angle needed to properly tension the cover, rather than forcing the pole to sit perfectly vertical. Installation is simple: remove the bottom tip currently on the support pole and insert the pole into the base pad's adapter to secure it. The pad is finished in grey to blend with most deck and cover colors. The support pole itself is sold separately; this listing is for the base pad only. The pad is compatible with Taylor Made Products support poles 11991 and 11992.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11976\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Boat cover support pole base pad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Pole Diameter:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Support Poles:\u003c\/strong\u003e Taylor Made Products 11991 and 11992\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Design:\u003c\/strong\u003e Swivel head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 22.01 x 1.5 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport Pole Included:\u003c\/strong\u003e No, sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e One base pad\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits any 7\/8 inch diameter support pole\u003c\/li\u003e\n\u003cli\u003eCompatible with Taylor Made Products support poles 11991 and 11992\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Products 11976 base pad used for?\u003c\/strong\u003e It replaces the crutch tip on a boat cover support pole, giving the pole a wider, non-slip base pad to rest against the deck instead of a single-point tip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat pole diameter does the 11976 base pad fit?\u003c\/strong\u003e The 11976 base pad fits any support pole with a 7\/8 inch diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 11976 base pad include the support pole?\u003c\/strong\u003e No, the support pole is sold separately. The 11976 listing is for the base pad only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Taylor Made Products support poles work with the 11976 base pad?\u003c\/strong\u003e The 11976 base pad is compatible with Taylor Made Products support poles 11991 and 11992.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 11976 base pad made of?\u003c\/strong\u003e It is molded from EPDM, a rubber compound that adds friction against the deck to help hold the pole in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 11976 base pad compare to a standard crutch tip?\u003c\/strong\u003e Unlike a crutch tip, which concentrates pressure at a single point, the 11976 base pad distributes pressure evenly across its EPDM surface, reducing the chance of deck marking and slipping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the pole angle be adjusted with the 11976 base pad installed?\u003c\/strong\u003e Yes, the 11976 base pad has a swivel head that lets the support pole settle at an angle rather than staying fixed vertical.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you install the 11976 base pad on a support pole?\u003c\/strong\u003e Remove the existing bottom tip from the support pole and insert the pole into the 11976 base pad's adapter to secure it in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 11976 base pad?\u003c\/strong\u003e The 11976 base pad is grey.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 11976 base pad?\u003c\/strong\u003e The 11976 base pad measures 22.01 x 1.5 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 11976 base pad weigh?\u003c\/strong\u003e It weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the 11976 base pad?\u003c\/strong\u003e One base pad is included; the support pole is not included and must be purchased separately.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989667131611,"sku":"NAT-11976","price":35.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/11976__24397.1722488201.500.750.jpg?v=1785188128"},{"product_id":"taylor-made-11992-adjustable-boat-cover-super-support-pole-36-to-64-aluminum-non-marring-tips","title":"Taylor Made Products Adjustable Boat Cover Support Pole, 36 to 64 Inches, Aluminum, Part 11992","description":"\u003cp\u003eThe Taylor Made Products Super Support Pole, part number 11992, is an adjustable aluminum pole that holds up the center of a boat cover so rain and debris cannot pool on top of it. Pooled water adds weight and strain to a cover and can lead to premature wear, sagging, and tears, so a properly placed support pole helps extend the life of the cover it is used with. This pole telescopes to fit boats needing support from 36 inches up to 64 inches in height, making it suitable for a wide range of boat sizes.\u003c\/p\u003e\u003cp\u003eThe pole functions as three support poles in one: it comes with a male canvas snap, a grommet tip, and a plain end cap, so it can be configured to attach directly to a cover's snap fitting, sit under a grommet, or simply stand free with a non-marring end cap. Each end of the pole is designed to be non-marring, protecting the boat's gelcoat, upholstery, or cover fabric from scuffs during use. Built from aluminum, the pole is lightweight yet sturdy enough to bear the load of a draped cover while resisting corrosion in a marine environment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11992\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Height Range:\u003c\/strong\u003e 36 inches to 64 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2.25 x 4 x 64 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Male canvas snap, grommet tip, and plain end cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011119926\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit; designed to work with most boat covers rather than a specific make or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat height range does the Taylor Made Products 11992 support pole cover?\u003c\/strong\u003e The 11992 support pole is adjustable from 36 inches up to 64 inches, letting it be set to the height needed to hold up the center of a boat cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this pole fit my specific boat cover?\u003c\/strong\u003e Yes, the 11992 support pole has a universal fit and is designed to work with most boat covers rather than one particular make or model, as long as the required support height falls within its 36 to 64 inch adjustable range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the support pole?\u003c\/strong\u003e Part number 11992 ships with a male canvas snap, a grommet tip, and a plain end cap, allowing the pole to be configured for a cover's snap fitting, a grommet opening, or free-standing use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the support pole made from?\u003c\/strong\u003e The 11992 pole is made from aluminum, giving it a lightweight build that resists corrosion in marine conditions while still supporting the weight of a draped boat cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I need a support pole under my boat cover?\u003c\/strong\u003e A center support pole like the 11992 keeps a boat cover raised so water cannot pool on top of it; pooled water adds strain and weight that can shorten the life of the cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the pole scratch my boat or cover?\u003c\/strong\u003e No, the 11992 support pole has non-marring tips on each end so it will not scratch or scuff the boat's surface or the cover fabric during use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I attach the pole to my cover?\u003c\/strong\u003e Depending on your cover's design, the 11992 pole can be set up with the included male canvas snap to attach to a snap fitting, the grommet tip to sit through a grommet, or the plain end cap for free-standing support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the support pole?\u003c\/strong\u003e The Taylor Made Products 11992 pole measures 2.25 x 4 x 64 inches and weighs 1.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pole made by Taylor Made Products?\u003c\/strong\u003e Yes, part number 11992 is manufactured by Taylor Made Products as part of their Super Support Pole lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this pole be used on larger boats?\u003c\/strong\u003e The 11992 pole extends up to 64 inches, making it suitable for larger boats that need a taller center support point for their cover.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989667229915,"sku":"NAT-11992","price":41.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/11992__80758.1722351411.500.750.jpg?v=1785188281"},{"product_id":"taylor-made-11991-adjustable-boat-cover-support-pole-36-to-64-aluminum-with-snap-crutch-tip","title":"Taylor Made Products Adjustable Boat Cover Support Pole 11991, Aluminum, 36 Inches to 64 Inches","description":"\u003cp\u003eThe Taylor Made Products 11991 is an adjustable aluminum support pole built to hold a boat cover up off the deck so water does not pool and collect on top of the boat. The pole extends from 36 inches to 64 inches, so one pole covers a wide range of boat sizes and cover heights, and it breaks down into a collapsing 3-piece design that stores at just 22 inches for easy stowing when not in use. An adjuster lets the owner dial in the exact height needed for a given cover.\u003c\/p\u003e\u003cp\u003eAt the base, the pole uses a crutch tip with an EPDM bottom pad instead of a traditional crutch tip design. The EPDM material grips the deck with additional friction to keep the pole from sliding or shifting, and the base pad has a built-in swivel so the pole can be angled to match the slope of the cover rather than sitting straight up and down. The base is designed to work with any 7\/8 inch diameter (bottom pole) support pole, so the existing bottom tip can be removed and this base inserted in its place. The pole itself is aluminum, which resists rust and corrosion in both saltwater and freshwater use. The set includes the support pole with its snap and crutch tip attached, ready to mount under a compatible boat cover.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11991\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Length:\u003c\/strong\u003e 36 inches to 64 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollapsed Storage Length:\u003c\/strong\u003e 22 inches (3-piece pole)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Pole Diameter Compatibility:\u003c\/strong\u003e 7\/8 inch diameter (bottom pole) support poles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Pad Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Feature:\u003c\/strong\u003e Swivel base pad for angle adjustment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2.25 x 4 x 64 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Snap and crutch tip, support pole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltraviolet Light Protection:\u003c\/strong\u003e No UV protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011119919\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal fit for boat covers using a 7\/8 inch diameter (bottom pole) support pole base\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat length range does this support pole adjust to?\u003c\/strong\u003e The Taylor Made Products 11991 support pole adjusts from 36 inches to 64 inches, with an adjuster to set the correct height for your cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow small does it collapse for storage?\u003c\/strong\u003e It breaks down into a 3-piece pole that collapses to 22 inches for easier storage when the boat cover is off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the support pole made of?\u003c\/strong\u003e The 11991 pole is made of aluminum, which is rustproof and corrosion-resistant in both saltwater and freshwater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 11991 support pole?\u003c\/strong\u003e It is finished in silver.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with part number 11991?\u003c\/strong\u003e The package includes the adjustable support pole along with its snap and crutch tip attached at the base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size support pole does the base fit?\u003c\/strong\u003e The base on the 11991 is designed for use with all 7\/8 inch diameter (bottom pole) support poles, so the existing bottom tip on a compatible pole can be swapped for this base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this pole use an EPDM base pad instead of a standard crutch tip?\u003c\/strong\u003e The EPDM bottom pad on the 11991 provides additional friction to hold the pole in place against the deck, versus the traditional crutch tip design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the base angle be adjusted to match my cover's slope?\u003c\/strong\u003e Yes, the base pad on the 11991 has a swivel capability that lets the pole be positioned at the right angle for your application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 11991 support pole weigh?\u003c\/strong\u003e The Taylor Made Products 11991 weighs 1.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the pole?\u003c\/strong\u003e Item dimensions for the 11991 are 2.25 x 4 x 64 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11991 a universal fit pole?\u003c\/strong\u003e Yes, it is a universal fit support pole intended to work with compatible boat covers rather than one specific boat model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Taylor Made Products 11991 support pole carries UPC 040011119919.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989667590363,"sku":"NAT-11991","price":37.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/11991__62853.1722507326.500.750.jpg?v=1785188676"},{"product_id":"taylor-made-products-40220-folding-pedestal-seat-cover-white-marine-vinyl-14h-x-18w-x-20d","title":"Taylor Made Products Folding Pedestal Boat Seat Cover, White Marine Vinyl, 14 x 18 x 20 Inches","description":"\u003cp\u003eThis Taylor Made Products folding pedestal seat cover protects a folding pedestal boat seat from sun, rain, and general wear when the boat is not in use. Made from white marine vinyl, it is sized to fit over folding pedestal seats measuring 14 inches high, 18 inches wide, and 20 inches deep, giving the cover a snug, purpose-built fit rather than a loose universal wrap. Marine vinyl is a weather-resistant material commonly used for boat seating and covers because it sheds water and resists the fading and cracking that ordinary fabric suffers from sun exposure. The cover simply pulls down over the folded seat to shield the vinyl or cushion surface underneath from UV rays, moisture, dust, and bird droppings between outings, helping preserve the look and feel of the seat and extending its usable life. It is a straightforward accessory piece with no installation required beyond fitting it over the seat and securing it in place. Taylor Made Products makes this folding pedestal cover as part of a broader lineup of seat covers sized for different seat styles, so boat owners with a folding pedestal seat can order a cover cut specifically for that seat's dimensions rather than a one-size-fits-all sheet that may not seat properly or fully cover the frame.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 40220\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Seat Covers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Folding pedestal seat cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 14 inches (H) x 18 inches (W) x 20 inches (D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011114822\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size seat does the Taylor Made Products 40220 cover fit?\u003c\/strong\u003e The 40220 folding pedestal seat cover is sized 14 inches high, 18 inches wide, and 20 inches deep, made to fit a folded pedestal-style boat seat of that size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this seat cover made from?\u003c\/strong\u003e It is made from marine vinyl, a water-resistant material designed to hold up to sun and moisture exposure on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 40220 cover come in?\u003c\/strong\u003e This Taylor Made Products folding pedestal cover comes in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 40220 seat cover weigh?\u003c\/strong\u003e The Taylor Made Products 40220 folding pedestal seat cover weighs 1.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cover fit a helm or bucket seat instead of a folding pedestal seat?\u003c\/strong\u003e No, part number 40220 is cut specifically for folding pedestal seats at 14 x 18 x 20 inches. Taylor Made Products makes separate covers sized for helm, bucket, and fixed-back seats as well as small swingback seats, so a different cover should be ordered for those seat styles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cover require any installation or hardware?\u003c\/strong\u003e No hardware is needed. The 40220 cover fits down over the folded pedestal seat to shield it when the boat is not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this product?\u003c\/strong\u003e The order includes one Taylor Made Products 40220 folding pedestal seat cover in white marine vinyl.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs marine vinyl durable enough for full-time outdoor storage?\u003c\/strong\u003e Marine vinyl is designed to resist fading, cracking, and water damage from ongoing sun and rain exposure, which is why Taylor Made Products uses it for the 40220 seat cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 40220 cover a genuine Taylor Made Products part?\u003c\/strong\u003e Yes, 40220 is the manufacturer part number for this Taylor Made Products folding pedestal seat cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cover be used on seats of a different size than 14 x 18 x 20 inches?\u003c\/strong\u003e The 40220 cover is sized specifically for 14 x 18 x 20 inch folding pedestal seats, so a seat with different dimensions should use a cover matched to its own size.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989671391451,"sku":"NAT-40220","price":22.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51p6zTBqwWL.jpg?v=1784486916"},{"product_id":"taylor-made-products-40210-back-to-back-lounge-boat-seat-cover-white-polyester-22h-x-50w-x-22d","title":"Taylor Made Products Back to Back Lounge Seat Cover, White Polyester, 40210, 22 Inch H x 50 Inch W x 22 Inch D","description":"\u003cp\u003eThis Taylor Made Products cover is built to protect a back to back lounge seat from sun, wind, mildew, and water while the boat sits at the dock or in storage. It measures 22 inches high by 50 inches wide by 22 inches deep, sized specifically for back to back lounge seating rather than a universal cover. The cover is made from a 6.25 ounce per square yard polyester fabric, a weight chosen to be strong yet still fold down easily for stowing when not in use. In white, it will not clash with most boat color schemes and helps reflect heat rather than absorb it.\u003c\/p\u003e\u003cp\u003eFunctionally, the cover is waterproof and offers UV protection to keep the seat vinyl or fabric underneath from cracking and fading in direct sunlight. Air vents are built in to let trapped moisture and heat escape so mildew is less likely to form underneath the cover during extended storage. A drawstring hem lets the cover cinch down snugly around the base of the seat so it stays in place in wind and while underway at low speeds or at anchor. It is a heavy duty cover intended for regular seasonal or storage use rather than occasional light protection.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 40210\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Back to Back Lounge Seat Cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 22 inches H x 50 inches W x 22 inches D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFabric Weight:\u003c\/strong\u003e 6.25 ounces per square yard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011114815\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Protection:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilation:\u003c\/strong\u003e Air vents\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e Drawstring hem\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit for back to back lounge seats of this size\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size seat does the Taylor Made Products 40210 cover fit?\u003c\/strong\u003e The 40210 cover is sized for a back to back lounge seat measuring 22 inches high by 50 inches wide by 22 inches deep, so it is built for that seat style and size rather than a generic universal fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 40210 seat cover waterproof?\u003c\/strong\u003e Yes, this Taylor Made Products cover is waterproof, which keeps rain and spray from soaking into the seat cushion underneath during storage or while docked.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cover protect against sun fading?\u003c\/strong\u003e UV protection is built into the 40210 cover's polyester fabric, which helps prevent the seat's vinyl or upholstery from cracking and fading in direct sunlight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 40210 boat seat cover made from?\u003c\/strong\u003e It is made from a 6.25 ounce per square yard polyester fabric, chosen to be strong while still folding down compactly for easy storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cover stay secured to the seat?\u003c\/strong\u003e A drawstring hem runs around the bottom edge of the 40210 cover, allowing it to be cinched snugly around the base of the seat so wind does not blow it off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill mildew form under this seat cover?\u003c\/strong\u003e The 40210 cover includes air vents that let trapped moisture escape, reducing the chance of mildew forming underneath during extended storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 40210 cover come in?\u003c\/strong\u003e This part number is offered in white, a color that also helps reflect heat away from the seat rather than absorbing it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made Products 40210 seat cover weigh?\u003c\/strong\u003e The 40210 cover weighs 1.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 40210 cover suitable for year-round storage or just short-term use?\u003c\/strong\u003e It is a heavy duty cover designed for regular seasonal or storage use, not just occasional light protection, thanks to its waterproof, UV-resistant polyester construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 40210 cover fit fixed helm or bucket seats instead of back to back lounge seats?\u003c\/strong\u003e No, the 40210 is sized specifically for a 22 inch H x 50 inch W x 22 inch D back to back lounge seat; other seat styles use different Taylor Made Products part numbers sized to match.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989671456987,"sku":"NAT-40210","price":38.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/NAT-70210__59779.1722510484.500.750.jpg?v=1785188036"},{"product_id":"taylor-made-products-vinyl-helm-bucket-fixed-back-boat-seat-cover-white-24h-x-24w-x-22d-mpn-40230","title":"Taylor Made Products White Vinyl Helm\/Bucket\/Fixed Back Seat Cover, 40230 (24\"H x 24\"W x 22\"D)","description":"\u003cp\u003eThis Taylor Made Products seat cover (part number 40230) is built to protect helm, bucket, and fixed-back boat seats from cracking and fading caused by sun, wind, and water exposure. Made from a heavy-duty white poly\/vinyl blend, the cover is waterproof and includes air vents to help keep seats cool and dry underneath while the cover is on. It is designed to fit seats measuring 24 inches high by 24 inches wide by 22 inches deep, making it a good match for helm chairs, bucket seats, and fixed-back seating in this size range.\u003c\/p\u003e\u003cp\u003eThe cover folds easily for compact storage when not in use, so it can be kept on board without taking up much space. As a universal-fit cover for this seat size and style, it is designed to slip over the seat and console area to shield vinyl, foam, and electronics from ongoing sun and weather damage between uses.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 40230\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Helm\/Bucket\/Fixed Back Seat Cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Poly\/vinyl blend\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 24 inches H x 24 inches W x 22 inches D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.65 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Level:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat Cover Placement:\u003c\/strong\u003e Front Seat, Back Seat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011114839\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTAY40230\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size seat does the Taylor Made Products 40230 seat cover fit?\u003c\/strong\u003e The 40230 is sized for helm, bucket, and fixed-back boat seats measuring 24 inches high by 24 inches wide by 22 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 40230 seat cover waterproof?\u003c\/strong\u003e Yes, the Taylor Made Products 40230 is made from a waterproof poly\/vinyl blend designed to keep water off the seat underneath.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 40230 seat cover come in?\u003c\/strong\u003e This Taylor Made Products seat cover, part number 40230, is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 40230 seat cover weigh?\u003c\/strong\u003e The Taylor Made Products 40230 weighs 1.65 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 40230 cover have any ventilation?\u003c\/strong\u003e Yes, the cover includes air vents that help keep the seat cool and dry while covered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 40230 fit any boat seat?\u003c\/strong\u003e It has a universal fit for helm, bucket, and fixed-back seats in the 24 inch by 24 inch by 22 inch size range, rather than being tied to a specific boat model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent number for the Taylor Made 40230?\u003c\/strong\u003e Yes, the OEM equivalent part number for the 40230 seat cover is TAY40230.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 40230?\u003c\/strong\u003e Ordering the 40230 gets you one Taylor Made Products seat cover; no additional hardware or accessories are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 40230 seat cover fold up for storage?\u003c\/strong\u003e Yes, it folds easily for compact storage when it is not covering the seat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 40230 seat cover made of?\u003c\/strong\u003e The 40230 is made from a heavy-duty white poly\/vinyl blend material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 40230 cover be used on a console as well as a seat?\u003c\/strong\u003e The Taylor Made Products cover line is designed to protect seats and consoles from sun, wind, and water damage in the same 24 inch by 24 inch by 22 inch size range.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989671620827,"sku":"NAT-40230","price":27.71,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/nat-40230_lg__03849.1558140870.500.750.jpg?v=1785188443"},{"product_id":"taylor-made-products-40235-deck-chair-cover-white-heavy-duty-vinyl-29-in-x-26-in-x-29-1-2-in","title":"Taylor Made Products 40235 White Vinyl Deck Chair Cover, 29 x 26 x 29-1\/2 Inches","description":"\u003cp\u003eThe Taylor Made Products 40235 is a heavy-duty white vinyl deck chair cover built to protect folding and stacking deck chairs from sun exposure, wind, rain, and general outdoor wear when not in use. Measuring 29 inches by 26 inches by 29-1\/2 inches, it is sized to slip over a standard deck chair and stay in place thanks to an elastic fitted bottom that cinches securely around the base of the chair. The cover is made from vinyl, a material chosen for its water resistance and durability in marine and outdoor environments, and it includes reinforced air vents that allow trapped moisture to escape rather than pool underneath the cover, which helps prevent mold and mildew buildup during storage. This makes the 40235 a practical choice for boat owners, dock box storage, and backyard or patio deck chairs alike. The white finish is a solid, consistent color rather than a pattern, and the cover is designed as a snug, purpose-built fit rather than a generic tarp. It ships as a single cover for one chair. For boaters and outdoor furniture owners who want a lower-cost alternative to leaving deck chairs exposed to the elements year-round, the 40235 offers a straightforward way to extend the life and appearance of deck furniture between uses.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 40235\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Heavy-duty vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 29 inches x 26 inches x 29-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Elastic fitted bottom\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilation:\u003c\/strong\u003e Reinforced air vents\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Deck chair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 cover per package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011114891\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size deck chair does the Taylor Made Products 40235 fit?\u003c\/strong\u003e The 40235 cover measures 29 inches by 26 inches by 29-1\/2 inches, sized to fit a standard deck chair of those dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 40235 deck chair cover made from?\u003c\/strong\u003e It is made from heavy-duty white vinyl, chosen for water resistance and durability in outdoor and marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cover have any ventilation to prevent moisture buildup?\u003c\/strong\u003e Yes, the 40235 includes reinforced air vents that let trapped moisture escape so it does not pool under the cover during storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cover stay secured on the chair?\u003c\/strong\u003e An elastic fitted bottom on the 40235 cinches around the base of the deck chair to hold the cover in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 40235?\u003c\/strong\u003e Part number 40235 is finished in solid white vinyl.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 40235 deck chair cover weigh?\u003c\/strong\u003e The Taylor Made Products 40235 weighs 2.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 40235 sold as a single cover or a set?\u003c\/strong\u003e The 40235 is sold as one deck chair cover per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cover protect a deck chair from rain and sun?\u003c\/strong\u003e Yes, the vinyl construction of the 40235 is designed to shield deck chairs from sun exposure, wind, and rain when the chair is not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 40235 cover be used for chairs stored outdoors year-round?\u003c\/strong\u003e The heavy-duty vinyl material and vented design of the 40235 make it suitable for ongoing outdoor storage of a deck chair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a version of this cover in a different material or color?\u003c\/strong\u003e Part number 40235 is the white vinyl version of this deck chair cover; other Taylor Made Products deck chair covers use different materials and are listed under separate part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made Products 40235?\u003c\/strong\u003e The UPC for the 40235 deck chair cover is 040011114891.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989671817435,"sku":"NAT-40235","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51aGhDlmJlL.jpg?v=1784486940"},{"product_id":"taylor-made-40400-small-center-console-cover-white-vinyl-42h-x-36w-x-24d-boat-console-cover-with-sewn-in-rope-lock","title":"Taylor Made Products Small Center Console Cover 40400, White Vinyl, Fits 42 x 36 x 24 Inch Consoles","description":"\u003cp\u003eThe Taylor Made Products 40400 is a white vinyl cover built to protect small boat center consoles from sun, wind, mildew, and water. It is sized to fit consoles measuring 42 inches high by 36 inches wide by 24 inches deep, and is designed to fit over the console as well as an attached outboard motor, making it a practical choice for boats with a small helm console and motor mounted nearby. The cover is made of white vinyl and uses a rope with a patented rope lock sewn into the hem, so it draws snug around the base of the console instead of flapping loose or blowing off in wind. Taylor Made designed the 40400 to be available for most makes and models of small center consoles, giving boat owners a straightforward way to guard against UV fading and cracking of gelcoat and upholstery when the boat is docked or in storage. Folded down, the cover packs into a compact 13 inch by 10 inch by 3 inch footprint for easy stowing when not in use. At 3 pounds, it is light enough to remove and store without hassle each time the boat goes out. This cover is part of Taylor Made's center console cover lineup, which also includes a medium size (part 40410) for larger consoles, so boat owners should confirm their console's dimensions against the 42 x 36 x 24 inch fit of the 40400 before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 40400\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Console Size:\u003c\/strong\u003e 42 inches high x 36 inches wide x 24 inches deep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 13 inches long x 10 inches wide x 3 inches high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e Rope with patented rope lock sewn in hem\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits most makes and models, over small consoles and attached outboard motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011114860\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for most makes and models of small center consoles measuring 42 inches high x 36 inches wide x 24 inches deep, including consoles with an attached outboard motor.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size console does the Taylor Made 40400 cover fit?\u003c\/strong\u003e The 40400 is sized for small center consoles measuring 42 inches high by 36 inches wide by 24 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 40400 console cover made of vinyl?\u003c\/strong\u003e Yes, the Taylor Made 40400 is made of white vinyl.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cover stay in place on the console?\u003c\/strong\u003e A rope with a patented rope lock is sewn into the hem of the 40400, letting it be cinched down for a snug fit around the base of the console.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cover fit over an attached outboard motor?\u003c\/strong\u003e Yes, the 40400 is designed to fit over small consoles that have an attached outboard motor as well as the console itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 40400 console cover weigh?\u003c\/strong\u003e The Taylor Made 40400 weighs 3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 40400 a universal fit or made for specific boat brands?\u003c\/strong\u003e The 40400 is available for most makes and models of small center consoles rather than one specific boat brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 40400 and the medium console cover?\u003c\/strong\u003e The 40400 covers small consoles at 42 x 36 x 24 inches, while Taylor Made's medium version, part 40410, is sized for larger consoles at 44 x 40 x 30 inches; measure your console before ordering to get the correct size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 40400 cover?\u003c\/strong\u003e The Taylor Made 40400 is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is the 40400 when packed for storage?\u003c\/strong\u003e Folded for storage, the 40400 cover measures approximately 13 inches long by 10 inches wide by 3 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made 40400 console cover?\u003c\/strong\u003e The UPC for the Taylor Made 40400 white vinyl console cover is 040011114860.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I use a cover like the 40400 on my boat's console?\u003c\/strong\u003e The 40400 protects a small center console from UV rays, wind, mildew, and water, helping prevent cracking and fading when the boat is docked or stored.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 40400 a genuine Taylor Made Products part?\u003c\/strong\u003e Yes, the 40400 is a genuine Taylor Made Products part, not a generic aftermarket cover.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989672079579,"sku":"NAT-40400","price":41.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61I03TscuXL.jpg?v=1784486958"},{"product_id":"taylor-made-55741-boat-cover-support-system-adjustable-28-48-pole-kit-with-webbing-for-boats-up-to-23","title":"Taylor Made Products 55741 Boat Cover Support System, Adjustable Pole for Boats up to 23 Feet","description":"\u003cp\u003eThe Taylor Made Products 55741 Boat Cover Support System creates a slope in your boat cover so water cannot pool or pocket on top of it, protecting the cover from mold and mildew. The kit includes one adjustable support pole that extends from 28 inches to 48 inches, 50 feet of 1 inch polypropylene webbing, quick release adjuster buckles, and two hooks. To install, the support pole attaches to the webbing and the hooks secure to the boat's transom decking, raising the center of the cover so rainwater and runoff drain off the sides instead of collecting in the middle.\u003c\/p\u003e\u003cp\u003eThe webbing and pole are made from non-marring polypropylene materials that will not scuff boat rails or gelcoat during installation or use. The system carries UV protection and is water resistant, making it suitable for extended outdoor storage. It is designed for boats up to 23 feet in length and is a vehicle-specific fit for boat cover applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 55741\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Boat Cover Support System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport Pole Adjustment Range:\u003c\/strong\u003e 28 inches to 48 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWebbing Length:\u003c\/strong\u003e 50 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWebbing Width:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWebbing Material:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Quick release adjuster buckles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hooks:\u003c\/strong\u003e Two\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e Up to 23 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Protection:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 29 x 5.25 x 1.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.75 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Taylor Made 55741 Boat Cover Support System do?\u003c\/strong\u003e It creates a slope in a boat cover so rain and runoff drain off the sides instead of pooling on top, which helps prevent mold and mildew from forming on the cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The 55741 kit includes one adjustable support pole, 50 feet of 1 inch polypropylene webbing, quick release adjuster buckles, and two hooks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is this support system designed for?\u003c\/strong\u003e The Taylor Made 55741 is designed for boats up to 23 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far does the support pole adjust?\u003c\/strong\u003e The support pole included with the 55741 system adjusts from 28 inches to 48 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the webbing included with the 55741 kit?\u003c\/strong\u003e 50 feet of 1 inch wide polypropylene webbing is included, enough to run the support system across the cover and secure it at the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the support system made from?\u003c\/strong\u003e The pole support kit uses polypropylene webbing and non-marring components that will not scuff boat rails or gelcoat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 55741 support system installed?\u003c\/strong\u003e The support pole attaches to the webbing, and the hooks attach to the boat's transom decking; no additional tools are required for a basic installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 55741 support system black?\u003c\/strong\u003e Yes, the webbing and components of the 55741 boat cover support system are black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 55741 support system protect against sun damage?\u003c\/strong\u003e Yes, the materials used in the 55741 kit include UV protection to resist sun-related degradation during outdoor storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made 55741 weigh?\u003c\/strong\u003e The Taylor Made 55741 Boat Cover Support System weighs 1.75 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 55741 support system water resistant?\u003c\/strong\u003e Yes, the 55741 boat cover support system is rated water resistant, suitable for use during outdoor cover storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many support poles come with the 55741 kit?\u003c\/strong\u003e One adjustable support pole is included in the Taylor Made 55741 kit, along with the webbing, buckles, and hooks needed to install it.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989673029851,"sku":"NAT-55741","price":84.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/nat-55741_lg__48001.1558117704.500.750.jpg?v=1785189031"},{"product_id":"taylor-made-55745-pontoon-boat-cover-support-system-adjustable-27-50-poles-with-60-webbing-to-prevent-water-pooling","title":"Taylor Made Products Pontoon Boat Cover Support System, Adjustable 27-50 Inch Poles, 55745","description":"\u003cp\u003eThe Taylor Made Products Pontoon Boat Cover Support System (55745) creates a slope across your pontoon boat cover so rainwater sheds off instead of pooling and pocketing, which over time can stretch fabric, stain vinyl, and promote mold and mildew. The kit includes two adjustable support poles that extend from 27 inches to 50 inches, letting you dial in the exact rise needed for your boat's beam and cover style. A full 60 feet of 1 inch polypropylene webbing strap runs the support system, secured with quick-release 12 inch adjuster buckles so you can tension or release the setup in seconds without tools.\u003c\/p\u003e\u003cp\u003eFour injection molded hooks attach the webbing to your pontoon's decking or rail structure, and all hardware is built from non-marring materials that will not scuff or scratch boat rails during installation or removal. In use, the webbing straps connect to support pads that hook onto the boat rails; the anodized support poles snap into the pads, and the frame is raised until the cover sits taut and tight. This is a universal-fit accessory designed to work across pontoon boat cover setups rather than a single model, making it a straightforward retrofit for boats that already have trouble with water collecting on top of the cover.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 55745\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Pontoon Boat Cover Support System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport Poles:\u003c\/strong\u003e Two adjustable poles, 27 inches to 50 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWebbing:\u003c\/strong\u003e 60 feet of 1 inch polypropylene webbing strap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjuster Buckles:\u003c\/strong\u003e Quick-release, 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHooks:\u003c\/strong\u003e Four injection molded hooks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 30 x 5.25 x 2.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.85 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011264909\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Protection:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Taylor Made 55745 support system do?\u003c\/strong\u003e It creates a slope across a pontoon boat cover so water runs off instead of pooling on top, which helps prevent pocketing, mold, and mildew on the cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do the support poles extend?\u003c\/strong\u003e The two support poles included with part number 55745 are adjustable from 27 inches to 50 inches to match the rise needed on your pontoon boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much webbing strap comes with this kit?\u003c\/strong\u003e 60 feet of 1 inch polypropylene webbing strap is included with the Taylor Made 55745 support system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fit my pontoon boat?\u003c\/strong\u003e The 55745 system is a universal-fit accessory built to work across pontoon boat cover setups rather than one specific model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the webbing made from?\u003c\/strong\u003e The webbing strap is 1 inch polypropylene, chosen for its water resistance and durability under tension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the straps attached to the boat?\u003c\/strong\u003e Four injection molded hooks on the 55745 kit secure the webbing to the decking, and the straps connect to support pads that hook onto the boat rails.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the hardware scratch my boat rails?\u003c\/strong\u003e No. The hooks and hardware on this Taylor Made support system are made from non-marring materials that will not scuff boat rails.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do the adjuster buckles work?\u003c\/strong\u003e Quick-release 12 inch adjuster buckles let you tension or loosen the webbing straps by hand, without tools, once the poles and pads are in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 55745 support system weigh?\u003c\/strong\u003e The Taylor Made Pontoon Cover Support System weighs 2.85 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The kit includes two adjustable support poles, 60 feet of polypropylene webbing, quick-release adjuster buckles, and four injection molded hooks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the support system?\u003c\/strong\u003e Part number 55745 is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a frame included with the support system?\u003c\/strong\u003e No, the frame that the cover is raised against is not included; the poles snap into the support pads and the frame is raised separately until the cover is taut.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989673128155,"sku":"NAT-55745","price":97.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/nat-55745_lg__44268.1558117762.500.750.jpg?v=1785188213"},{"product_id":"taylor-made-products-67681-boat-cover-reinforcement-material-kit-vinyl-patch-fabric-glue-universal-fit-made-in-usa","title":"Taylor Made Products 67681 Boat Cover Reinforcement Material Kit, Universal Fit","description":"\u003cp\u003eThe Taylor Made Products 67681 Boat Cover Reinforcement Material Kit gives boat owners a simple way to reinforce a boat cover at the points that see the most wear and abrasion, such as sharp windshield corners, Bimini top hardware, and mounting brackets for electronic equipment. Rather than replacing an entire cover when it starts to chafe or tear at a stress point, this kit lets you patch and reinforce the vinyl material directly, extending the useful life of the cover.\u003c\/p\u003e\u003cp\u003eThe kit includes one square yard of tough vinyl reinforcement fabric, which is enough material to cover all the likely wear points on a typical boat cover, along with a four ounce bottle of fabric glue formulated specifically for adhering the reinforcement patches to cover material. The vinyl is designed for a universal fit, so it can be cut and applied to covers of varying sizes and shapes rather than being molded to one specific cover design. This kit is made in the USA.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 67681\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Boat Cover Reinforcement Material Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFabric Included:\u003c\/strong\u003e 1 square yard of vinyl reinforcement material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive Included:\u003c\/strong\u003e 4 ounce bottle of fabric glue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Taylor Made Products 67681 kit?\u003c\/strong\u003e The kit includes one square yard of vinyl reinforcement fabric and a four ounce bottle of fabric glue for attaching it to a boat cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this reinforcement kit used for?\u003c\/strong\u003e It is used to reinforce a boat cover at points where it is prone to wear, such as sharp windshield corners, Bimini top hardware, and brackets for electronic equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 67681 kit fit my specific boat cover?\u003c\/strong\u003e Yes, the vinyl material has a universal fit and can be cut to size for reinforcing covers of different shapes and sizes rather than being molded to one exact cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the reinforcement patch made from?\u003c\/strong\u003e The reinforcement material in the Taylor Made Products 67681 kit is a tough vinyl fabric.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much reinforcement material comes in the kit?\u003c\/strong\u003e One square yard of vinyl fabric is supplied, which is enough to reinforce all the likely wear points on a typical boat cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much fabric glue is included?\u003c\/strong\u003e A four ounce bottle of fabric glue is included with the 67681 kit for attaching the vinyl reinforcement material to the cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the vinyl material waterproof or UV resistant?\u003c\/strong\u003e No specific waterproofing or UV protection rating is stated for the vinyl material in the Taylor Made Products 67681 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the kit weigh?\u003c\/strong\u003e The Taylor Made Products 67681 Boat Cover Reinforcement Material Kit weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the 67681 reinforcement kit made?\u003c\/strong\u003e The Taylor Made Products 67681 kit is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used on any boat cover material?\u003c\/strong\u003e The kit is designed as a universal-fit vinyl reinforcement and glue system intended for boat covers, and it is applied to the cover surface rather than being sewn into a specific cover model.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989674897627,"sku":"NAT-67681","price":24.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/67681__70702.1722509583.500.750.jpg?v=1785188569"},{"product_id":"taylor-made-67867-boat-privacy-partition-curtain-gray-30w-x-30d-x-70h-bimini-hard-top-compatible-marine-grade-fire-retardant-polyester","title":"Taylor Made Products Privacy Partition Curtain 67867, Gray, 30 x 30 x 70 Inches, Fits Under Bimini or Hard Top","description":"\u003cp\u003eThe Taylor Made Products Privacy Partition Curtain (part number 67867) hangs under a bimini top or hard top to screen off a section of the boat from onlookers while you are out on the water. It installs anywhere under the canopy using the included straps and hardware, so it can be positioned to divide off a changing area, a head, or any space you want kept out of view. The panel measures 30 inches wide by 30 inches deep by 70 inches tall once installed, giving full floor-to-canopy coverage.\u003c\/p\u003e\u003cp\u003eThe curtain is made from 100 percent polyester finished to be fire retardant and marine grade, built to hold up to sun, spray, and repeated use on the water. A full-length heavy-duty zipper runs the panel for quick access, and UV-resistant tie downs and fasteners secure it in place so it stays put underway. Because it mounts to the bimini or hard top frame rather than a fixed enclosure, it works as an add-on privacy solution for boats that already have a top installed, without requiring a full enclosure kit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 67867\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Privacy Partition Curtain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 100% Polyester, Fire-Retardant Marine Grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstalled Dimensions:\u003c\/strong\u003e 30 inches W x 30 inches D x 70 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 12 inches L x 9 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Zipper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Straps and hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Bimini top or hard top\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011678676\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made Products Privacy Partition Curtain 67867?\u003c\/strong\u003e The 67867 privacy partition installs at 30 inches wide by 30 inches deep by 70 inches tall, sized to run from the deck up to the canopy frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the partition made of?\u003c\/strong\u003e It is made from 100 percent polyester that is finished to be fire retardant and marine grade, so it holds up to sun and spray on the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this partition fit under a bimini top or a hard top?\u003c\/strong\u003e Yes, the 67867 partition is designed to be installed under either a bimini top or a hard top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 67867 partition come in?\u003c\/strong\u003e This partition is gray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is included with part number 67867?\u003c\/strong\u003e Straps and hardware are included, so no separate mounting kit is needed to hang the partition under the canopy frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the partition closed or opened?\u003c\/strong\u003e The 67867 curtain has a full-length, heavy-duty zipper running the panel for access through the partition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Taylor Made Products partition secured in place?\u003c\/strong\u003e It secures with UV-resistant tie downs and fasteners so it stays in position while underway.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 67867 privacy partition weigh?\u003c\/strong\u003e The partition weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the partition used for on a boat?\u003c\/strong\u003e It is used to create privacy from onlookers while out on the water, for example to screen off a changing area or head space under the canopy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 67867 partition a full enclosure kit?\u003c\/strong\u003e No, it is a single privacy partition panel that hangs under an existing bimini or hard top rather than a full enclosure system.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989675061467,"sku":"NAT-67867","price":88.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/nat-67867_lg__70166.1558118060.500.750.jpg?v=1785188337"},{"product_id":"taylor-made-products-80210-back-to-back-lounge-boat-seat-cover-blue-poly-cotton-fits-22h-x-50w-x-22d-seats","title":"Taylor Made Products 80210 Back-to-Back Lounge Seat Cover, Blue Poly\/Cotton, Fits 22 x 50 x 22 Inch Seats","description":"\u003cp\u003eThe Taylor Made Products 80210 is a back-to-back lounge seat cover made to protect boat seating from cracking and fading in the sun. Built in a blue poly\/cotton fabric, it shields upholstery from damaging ultra-violet rays, wind, mildew, and water, keeping seats cool and clean when the boat is not in use. The fabric is a 6.25 oz. Per square yard material, chosen to be strong yet lightweight so it is easy to handle when covering or removing the seat and easy to store afterward, since it folds up compactly.\u003c\/p\u003e\u003cp\u003eThis cover is sized for a back-to-back lounge seat measuring 22 inches high by 50 inches wide by 22 inches deep, matching the dimensions of the seat it is designed to fit. It ships as a single item in a blue colorway and is intended as a direct fit for Taylor Made back-to-back lounge seating rather than a universal cover, helping keep the fitted look and full coverage the seat style requires.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 80210\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover Style:\u003c\/strong\u003e Back to Back Lounge Seat Cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Poly\/Cotton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFabric Weight:\u003c\/strong\u003e 6.25 oz. Per square yard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Seat Dimensions:\u003c\/strong\u003e 22 inches H x 50 inches W x 22 inches D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Weight:\u003c\/strong\u003e 4.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 13 inches x 11 inches x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011090263\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat seat does the Taylor Made Products 80210 cover fit?\u003c\/strong\u003e The 80210 is sized for a back-to-back lounge seat measuring 22 inches high by 50 inches wide by 22 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this seat cover?\u003c\/strong\u003e The Taylor Made Products 80210 back-to-back lounge seat cover comes in blue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 80210 cover made from?\u003c\/strong\u003e It is made from a poly\/cotton fabric weighing 6.25 ounces per square yard, chosen to be strong yet lightweight for easy handling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cover protect my seat from sun damage?\u003c\/strong\u003e Yes, the 80210 is designed to shield boat seating from ultra-violet rays that cause cracking and fading over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cover protect against rain and moisture?\u003c\/strong\u003e The Taylor Made Products 80210 protects seats from wind, mildew, and water in addition to UV exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 80210 seat cover weigh?\u003c\/strong\u003e The item weighs 4.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of the 80210?\u003c\/strong\u003e It ships in a package measuring 13 inches by 11 inches by 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the cover easy to store when not in use?\u003c\/strong\u003e Yes, the 80210 folds easily for storage since it is made from a lightweight fabric.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many covers come in one package?\u003c\/strong\u003e One Taylor Made Products 80210 cover is included per package, sized for a single back-to-back lounge seat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 80210 a universal seat cover?\u003c\/strong\u003e No, it is cut to fit a back-to-back lounge seat measuring 22 inches high by 50 inches wide by 22 inches deep, not a generic universal cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made Products 80210?\u003c\/strong\u003e The UPC for this back-to-back lounge seat cover is 040011090263.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989675159771,"sku":"NAT-80210","price":48.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/nat-80210_lg__36751.1558141382.500.750.jpg?v=1785188909"},{"product_id":"taylor-made-products-80220-folding-pedestal-boat-seat-cover-blue-poly-14-in-h-x-18-in-w-x-20-in-d","title":"Taylor Made Products Folding Pedestal Seat Cover, Blue, Part Number 80220","description":"\u003cp\u003eThe Taylor Made Products folding pedestal seat cover, part number 80220, is a fitted cover made to protect a folding pedestal boat seat from sun, rain, and general wear when the boat is not in use. Slipped over the seat and cinched down, the cover shields the upholstery from cracking and fading caused by ultraviolet exposure while also keeping wind-blown dirt, mildew-causing moisture, and water off the seat surface.\u003c\/p\u003e\u003cp\u003ePart 80220 is sized for folding pedestal seats measuring 14 inches high by 18 inches wide by 20 inches deep, so it is built to match the profile of that seat style rather than being a generic drape. The cover folds down easily for compact storage when it is not in use, and its lightweight construction makes it simple to pull on and remove at the dock. It is finished in blue.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 80220\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Folding Pedestal Seat Cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 14 inches H x 18 inches W x 20 inches D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Protection:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011090270\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eSized for folding pedestal boat seats measuring 14 inches H x 18 inches W x 20 inches D.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size seat does the 80220 cover fit?\u003c\/strong\u003e Part number 80220 is sized for folding pedestal boat seats measuring 14 inches high by 18 inches wide by 20 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cover made for a specific seat style?\u003c\/strong\u003e Yes, the 80220 is made specifically for folding pedestal seats rather than helm, bucket, or swingback styles, which use different Taylor Made Products cover part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 80220 seat cover?\u003c\/strong\u003e The 80220 folding pedestal seat cover is finished in blue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 80220 cover made from?\u003c\/strong\u003e It is made from polyester fabric designed to be lightweight and easy to handle while still standing up to outdoor use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cover protect against sun and rain?\u003c\/strong\u003e The 80220 offers UV protection to guard against fading and cracking from sunlight, along with water-resistant protection against rain and moisture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the folding pedestal seat cover weigh?\u003c\/strong\u003e The Taylor Made Products 80220 weighs 1.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cover help prevent mildew on my boat seat?\u003c\/strong\u003e By keeping wind-driven moisture and standing water off the seat, the 80220 cover helps reduce the conditions that lead to mildew buildup on a stored seat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 80220 cover fold up for storage?\u003c\/strong\u003e Yes, the cover folds easily for compact storage when it is removed from the seat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part 80220 a universal fit or seat-specific?\u003c\/strong\u003e The 80220 is listed as a universal fit within its folding pedestal seat category, meaning it is designed to fit folding pedestal seats of the stated 14 x 18 x 20 inch dimensions rather than one exact seat model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made Products 80220 seat cover?\u003c\/strong\u003e The UPC for part number 80220 is 040011090270.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989675454683,"sku":"NAT-80220","price":28.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/518nQ038z7L.jpg?v=1784487125"},{"product_id":"taylor-made-80230-helm-bucket-fixed-back-boat-seat-cover-rip-stop-polyester-navy-fits-seats-24h-x-24w-x-22d","title":"Taylor Made Products Helm\/Bucket\/Fixed Back Boat Seat Cover, Navy, 24H x 24W x 22D Inches","description":"\u003cp\u003eThe Taylor Made Products Helm\/Bucket\/Fixed Back Boat Seat Cover (part number 80230) is a purpose-fit protective cover designed for helm, bucket, and fixed-back style boat seats. It shields upholstery from sun, rain, and everyday abrasion when the boat is docked, trailered, or in storage. The cover is made from a 6.25 oz. Per square yard rip-stop polyester material in navy that is strong yet lightweight, making it easy to handle, fit over the seat, and stow away when not in use. The rip-stop weave resists tearing and the fabric carries UV protection and water resistance to help guard against fading and moisture damage over repeated exposure. Sized at 24 inches high by 24 inches wide by 22 inches deep, it is built to fit helm, bucket, and fixed-back seat profiles without a bulky, loose fit. This cover is intended to extend the life of the seat underneath by keeping out the elements between uses, and its lightweight construction means it folds down small for convenient onboard storage. It is a straightforward, functional accessory for boat owners who want to protect their seating investment without added bulk or complicated installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 80230\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Seat Covers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Helm, bucket, and fixed-back boat seats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 24 inches H x 24 inches W x 22 inches D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Navy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rip-stop polyester, 6.25 oz.\/sq. Yd.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Protection:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit for helm\/bucket\/fixed-back seats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat seats does the Taylor Made Products 80230 cover fit?\u003c\/strong\u003e Part number 80230 is sized for helm, bucket, and fixed-back style boat seats, measuring 24 inches high by 24 inches wide by 22 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this seat cover made from?\u003c\/strong\u003e The 80230 cover uses a 6.25 oz. Per square yard rip-stop polyester fabric in navy, chosen to be strong yet lightweight for easy handling and stowing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 80230 cover waterproof?\u003c\/strong\u003e It is water resistant rather than fully waterproof, which helps protect the seat underneath from rain and moisture exposure while docked or in storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cover offer UV protection?\u003c\/strong\u003e Yes, the Taylor Made 80230 cover includes UV protection to help reduce sun fading and material degradation on the seat below.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 80230 seat cover come in?\u003c\/strong\u003e This cover is navy, matching the Taylor Made Products 80230 helm\/bucket\/fixed-back seat cover line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Taylor Made 80230 cover?\u003c\/strong\u003e The cover measures 24 inches high, 24 inches wide, and 22 inches deep, matching the helm\/bucket\/fixed-back seat category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 80230 seat cover weigh?\u003c\/strong\u003e The Taylor Made Products 80230 boat seat cover weighs 1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cover fit a swingback seat instead?\u003c\/strong\u003e No, part number 80230 is sized for helm\/bucket\/fixed-back seats; Taylor Made offers separate part numbers sized for small and large swingback seats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 80230 cover easy to fold and store?\u003c\/strong\u003e Yes, the lightweight rip-stop polyester construction on the 80230 cover is designed to be easy to handle and stow when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 80230?\u003c\/strong\u003e Ordering part number 80230 gets you one Taylor Made Products navy helm\/bucket\/fixed-back boat seat cover sized 24 inches H x 24 inches W x 22 inches D.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989675520219,"sku":"NAT-80230","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/nat-80230_lg__91763.1558141447.500.750.jpg?v=1785188193"},{"product_id":"taylor-made-products-80235-boat-seat-console-cover-blue-ripstop-polyester-29-x-26-x-29-1-2-in","title":"Taylor Made Products 80235 Blue Ripstop Polyester Boat Seat and Console Cover, 29 x 26 x 29-1\/2 Inches","description":"\u003cp\u003eThe Taylor Made Products 80235 is a boat seat and console cover made from blue Ripstop polyester with a polyurethane coating, built to shield your seats and electronics from damaging ultra-violet rays, wind, mildew, and water. Whether draped over a helm seat, bench seat, or console-mounted electronics, this cover keeps upholstery and hardware protected from sun fading and cracking while the boat sits at the dock or in storage. The 600 denier Ripstop polyester construction is tough enough to resist tearing and abrasion while remaining lightweight and easy to handle. Its polyurethane coating adds a layer of water resistance that helps keep moisture, mildew, and grime off the seat surface underneath.\u003c\/p\u003e\u003cp\u003eMeasuring 29 inches by 26 inches by 29-1\/2 inches, the cover is sized to fit standard boat seats and console shapes, and it folds easily for compact storage when not in use, so it can be tucked into a storage compartment or under a seat without taking up much space. It ships in blue, giving boat owners a color option distinct from Taylor Made's heavy-duty white vinyl cover in the same size. Backed by the Taylor Made Products name, the 80235 is a straightforward, purpose-built accessory for keeping seats and consoles cool, clean, and protected between uses.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 80235\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Ripstop Polyester with Polyurethane Coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover Dimensions:\u003c\/strong\u003e 29 inches x 26 inches x 29-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 15 x 11 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011802354\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size seats or consoles does the Taylor Made 80235 cover fit?\u003c\/strong\u003e The Taylor Made Products 80235 cover measures 29 inches by 26 inches by 29-1\/2 inches, sized to fit standard boat seats and console shapes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 80235 boat cover made from?\u003c\/strong\u003e It is made from Ripstop polyester with a polyurethane coating, a durable, water-resistant fabric that resists tearing while shedding moisture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 80235 cover protect against sun and UV damage?\u003c\/strong\u003e Yes, the Taylor Made 80235 is designed to protect seats and console electronics from ultra-violet rays, wind, mildew, and water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 80235 boat seat cover?\u003c\/strong\u003e The 80235 is finished in blue Ripstop polyester.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 80235 cover weigh?\u003c\/strong\u003e The Taylor Made 80235 boat seat and console cover weighs 3.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 80235 the same as Taylor Made's white vinyl cover?\u003c\/strong\u003e No, the 80235 is the blue Ripstop polyester version; Taylor Made's heavy-duty white vinyl cover (40235) shares the same 29 x 26 x 29-1\/2 inch dimensions but uses a different material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 80235 cover be folded for storage?\u003c\/strong\u003e Yes, the cover folds easily for compact storage when it is not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the 80235?\u003c\/strong\u003e One Taylor Made Products 80235 boat seat and console cover is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 80235 cover mildew resistant?\u003c\/strong\u003e Yes, the polyurethane-coated Ripstop polyester construction of the 80235 helps resist mildew as well as wind and water exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 80235 a genuine Taylor Made Products cover?\u003c\/strong\u003e Yes, part number 80235 is a genuine Taylor Made Products seat and console cover, not an aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made 80235 cover?\u003c\/strong\u003e The UPC for the Taylor Made Products 80235 boat seat and console cover is 040011802354.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989675651291,"sku":"NAT-80235","price":50.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/512t04N52qL.jpg?v=1784487142"},{"product_id":"taylor-made-products-80240-small-swingback-boat-seat-cover-navy-rip-stop-polyester-36h-x-36w-x-20d","title":"Taylor Made Products Small Swingback Boat Seat Cover, Rip-Stop Polyester, Navy, Part 80240","description":"\u003cp\u003eThe Taylor Made Products 80240 is a small swingback boat seat cover built to protect your seating from sun, rain, and everyday wear when the boat is docked or in storage. Made from a rip-stop polyester fabric weighing 6.25 oz.\/sq. Yd., it strikes a balance between durability and easy handling, so the cover is strong enough to resist tearing and abrasion in marine conditions while still being lightweight to remove, fold, and stow. The UV-resistant construction helps guard vinyl and fabric upholstery against sun damage and fading, and the finish is offered in navy.\u003c\/p\u003e\u003cp\u003eThis cover is sized for small swingback seats and is designed to fit a seat measuring approximately 36 inches high, 36 inches wide, and 20 inches deep. It slips over the seat to shield it from moisture and debris, helping extend the life of the upholstery underneath. Taylor Made also offers a corresponding cover for large swingback seats (part 80245), which is a separate size and part number, so buyers should confirm their seat dimensions before ordering to make sure the small swingback cover, part 80240, is the correct fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 80240\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Seat Type:\u003c\/strong\u003e Small swingback seats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 36 inches H x 36 inches W x 20 inches D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rip-stop polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFabric Weight:\u003c\/strong\u003e 6.25 oz.\/sq. Yd.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Navy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit for small swingback seats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSmall swingback boat seats measuring approximately 36 inches H x 36 inches W x 20 inches D\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size seat does the Taylor Made 80240 cover fit?\u003c\/strong\u003e Part 80240 is sized for small swingback boat seats measuring approximately 36 inches high, 36 inches wide, and 20 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this seat cover made from?\u003c\/strong\u003e The 80240 cover is made from a rip-stop polyester fabric weighing 6.25 oz.\/sq. Yd., chosen to be strong yet lightweight enough for easy handling and stowing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 80240 cover UV-resistant?\u003c\/strong\u003e Yes, the cover is UV-resistant polyester, designed to protect small swingback seats from sun exposure as well as rain and abrasion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does part 80240 come in?\u003c\/strong\u003e This cover, part 80240, is offered in navy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 80240 seat cover weigh?\u003c\/strong\u003e The Taylor Made 80240 weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cover fit a large swingback seat instead of a small one?\u003c\/strong\u003e No, part 80240 is sized specifically for small swingback seats at 36 inches H x 36 inches W x 20 inches D; large swingback seats use the separate part 80245, which is a different size and part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 80240?\u003c\/strong\u003e Ordering part 80240 includes one Taylor Made small swingback seat cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Taylor Made Products part?\u003c\/strong\u003e Yes, part 80240 is a genuine Taylor Made Products swingback seat cover, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my seat qualifies as a small swingback seat?\u003c\/strong\u003e Measure your seat: if it is approximately 36 inches high, 36 inches wide, and 20 inches deep, the Taylor Made 80240 is the correct size cover for it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the rip-stop fabric resist tearing?\u003c\/strong\u003e Yes, the 80240's rip-stop polyester construction is designed to resist tearing and abrasion while remaining lightweight for handling.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989675749595,"sku":"NAT-80240","price":48.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/nat-80240_lg__21203.1722492880.500.750.jpg?v=1785188037"},{"product_id":"taylor-made-80410-medium-center-console-cover-rip-stop-polyester-navy-fits-44h-x-40w-x-30d-consoles","title":"Taylor Made Products 80410 Medium Center Console Cover - Navy Ripstop Polyester, 44 x 40 x 30 Inches","description":"\u003cp\u003eThe Taylor Made Products 80410 is a medium center console cover built to shield boat center consoles from sun, rain, and everyday wear when the boat is docked or in storage. It is constructed of navy rip-stop polyester, a tightly woven fabric designed to resist tearing and abrasion, and is finished with white vinyl trim for added durability along the seams. The cover is sized for medium center consoles measuring 44 inches high by 40 inches wide by 30 inches deep, giving a snug, secure fit that helps keep dust, moisture, and UV rays off the console surface and any electronics mounted to it. Its rugged construction is intended to stand up to demanding marine conditions while protecting console upholstery and hardware from fading and deterioration over time. The cover is made in the USA and weighs 3.85 pounds. It is a straightforward, functional accessory for boat owners who want to extend the life of their center console between uses, and it is sold as part of Taylor Made's line of console covers offered in multiple sizes to match different console dimensions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 80410\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsole Size:\u003c\/strong\u003e Medium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 44 inches high x 40 inches wide x 30 inches deep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFabric:\u003c\/strong\u003e Navy Ripstop Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim:\u003c\/strong\u003e White Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Navy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.85 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance Level:\u003c\/strong\u003e Water Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011090324\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size console does the Taylor Made 80410 cover fit?\u003c\/strong\u003e The 80410 is a medium center console cover measuring 44 inches high by 40 inches wide by 30 inches deep, so it is sized for medium-sized center consoles matching those dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fabric is the 80410 console cover made from?\u003c\/strong\u003e It is made from navy rip-stop polyester, a tightly woven fabric chosen for tear and abrasion resistance, with white vinyl trim along the edges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 80410 cover waterproof?\u003c\/strong\u003e It is rated water resistant rather than fully waterproof, which helps protect the console and any mounted electronics from rain and moisture during storage or while docked.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 80410 center console cover weigh?\u003c\/strong\u003e The Taylor Made 80410 weighs 3.85 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 80410?\u003c\/strong\u003e Part number 80410 is navy, with white vinyl trim accents.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Taylor Made 80410 console cover manufactured?\u003c\/strong\u003e This cover is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 80410 come with any trim or reinforcement?\u003c\/strong\u003e Yes, the 80410 medium console cover has white vinyl trim along its edges for added durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made 80410?\u003c\/strong\u003e The UPC for the Taylor Made Products 80410 medium center console cover is 040011090324.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 80410 and the larger Taylor Made console cover?\u003c\/strong\u003e The 80410 is the medium-size console cover at 44 inches high by 40 inches wide by 30 inches deep; Taylor Made also offers a large center console cover with different dimensions for bigger consoles, which is a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 80410 protect a console's electronics from sun damage?\u003c\/strong\u003e Yes, the navy rip-stop polyester construction of the 80410 is designed to shield the console surface and mounted electronics from UV exposure and general weather while the boat is not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 80410 a fitted cover or a universal cover?\u003c\/strong\u003e The 80410 is sized specifically for medium center consoles at 44 inches high by 40 inches wide by 30 inches deep rather than being a one-size-fits-all universal cover.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989675782363,"sku":"NAT-80410","price":63.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51wTPTsGJyL.jpg?v=1784487152"},{"product_id":"taylor-made-80400-small-center-console-cover-navy-ripstop-polyester-42h-x-36w-x-24d","title":"Taylor Made Small Center Console Cover, Navy Ripstop Polyester, 42 x 36 x 24 Inches","description":"\u003cp\u003eThe Taylor Made Small Center Console Cover (part number 80400) is a fitted navy ripstop polyester cover built to protect a small boat console from sun, rain, and dust while docked or in storage. It is sized for small center consoles at 42 inches high, 36 inches wide, and 24 inches deep, and is designed to fit over the console as well as an attached outboard motor, making it a convenient single-cover solution for boats with the motor mounted at the helm.\u003c\/p\u003e\u003cp\u003eThe cover secures with a rope sewn into the hem, using a patented rope lock to cinch the hem snug against the console and hold the cover in place in wind or when the boat is under tow or in storage. The ripstop polyester construction resists tearing and abrasion, and the cover is designed to work across most makes and models of small center console boats.\u003c\/p\u003e\u003cp\u003eAt 3.5 pounds, the cover is light enough for easy on\/off handling for regular use, while still providing a durable protective layer over the console structure and any attached hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 80400\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Small center console\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 42 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Ripstop Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Navy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e Rope with patented rope lock sewn in hem\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits over small consoles and attached outboard motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011090317\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size console does the Taylor Made 80400 cover fit?\u003c\/strong\u003e Part number 80400 is sized for a small center console, measuring 42 inches high, 36 inches wide, and 24 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cover fit an outboard motor mounted on the console?\u003c\/strong\u003e Yes, the Taylor Made 80400 is designed to fit over small consoles and an attached outboard motor as a single cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Taylor Made small console cover made from?\u003c\/strong\u003e It is made from navy ripstop polyester, a tear-resistant fabric suited to outdoor boat storage conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cover stay secured to the console?\u003c\/strong\u003e A rope is sewn into the hem of the cover along with a patented rope lock, which cinches the hem snug around the console to keep the cover in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made 80400 console cover weigh?\u003c\/strong\u003e The cover weighs 3.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 80400 cover a universal fit or made for a specific boat brand?\u003c\/strong\u003e It is available for most makes and models of small center console boats rather than a single brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 80400?\u003c\/strong\u003e Part number 80400 is navy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a different size cover if my console is bigger than 42 x 36 x 24 inches?\u003c\/strong\u003e The 80400 is the small center console size; larger medium and large center console cover sizes are offered as separate part numbers from Taylor Made.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the rope lock need to be tied manually?\u003c\/strong\u003e The rope lock on the Taylor Made 80400 is designed to cinch the hem snug without needing to be manually tied like a standard drawstring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made 80400 console cover?\u003c\/strong\u003e The UPC for the Taylor Made 80400 small center console cover is 040011090317.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989675815131,"sku":"NAT-80400","price":59.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51FRhaa-EAL.jpg?v=1784487158"},{"product_id":"taylor-made-products-80420-large-center-console-cover-rip-stop-polyester-navy-fits-consoles-up-to-45h-x-46w-x-40d","title":"Taylor Made Products 80420 Large Center Console Cover, 45 x 46 x 40 Inches","description":"\u003cp\u003eThe Taylor Made Products 80420 is a large center console cover built to protect boat center consoles measuring 45 inches high, 46 inches wide, and 40 inches deep. Made from heavy-duty rip-stop polyester, this cover is constructed to stand up to sun, rain, spray, and general wear in a marine environment. Reinforcement patches are sewn into the cover at high-wear points to add extra durability where the fabric sees the most stress, helping the cover hold up over repeated use and storage.\u003c\/p\u003e\u003cp\u003eThe fabric is treated to resist mildew and water, which helps keep the console dry and clean underneath while guarding upholstery, gauges, and electronics from moisture damage during storage or while underway. The 80420 is made in the USA and is backed by a 5-year limited warranty, reflecting its heavy-duty build quality. This cover is designed specifically for large center consoles and is intended to fit consoles built to the 45 inch by 46 inch by 40 inch dimension range.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 80420\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Large Center Console Cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 45 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 46 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 40 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Mildew and water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Heavy-duty with reinforcement patches sewn in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5-year limited warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011090331\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size console does the Taylor Made 80420 fit?\u003c\/strong\u003e The 80420 is sized for a large center console measuring 45 inches high, 46 inches wide, and 40 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made 80420 cover made of?\u003c\/strong\u003e It is made from a heavy-duty rip-stop polyester fabric designed for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 80420 console cover waterproof?\u003c\/strong\u003e It is treated to be mildew and water resistant, helping protect the console and its contents from moisture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made 80420 weigh?\u003c\/strong\u003e The Taylor Made 80420 large center console cover weighs 6.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 80420 cover have reinforced stress points?\u003c\/strong\u003e Yes, the cover includes reinforcement patches sewn in at high-wear areas for added durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Taylor Made 80420?\u003c\/strong\u003e The 80420 is backed by a 5-year limited warranty from Taylor Made Products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 80420 made in the USA?\u003c\/strong\u003e Yes, the 80420 large center console cover is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 80420 fit a small or mid-size console?\u003c\/strong\u003e No, the 80420 is built specifically for large center consoles at 45 inches high by 46 inches wide by 40 inches deep; a differently sized console will need a different cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I clean the Taylor Made 80420 cover?\u003c\/strong\u003e Because it is a mildew and water resistant rip-stop polyester fabric, the 80420 can be wiped down or rinsed off to remove dirt and salt spray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Taylor Made 80420 part number cover?\u003c\/strong\u003e Part number 80420 identifies the large center console cover in Taylor Made Products' seat and console cover lineup.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989675880667,"sku":"NAT-80420","price":76.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51wTPTsGJyL_57fc5410-9b67-4daa-9599-27e501196ecc.jpg?v=1784487161"},{"product_id":"taylor-made-products-80245-large-swingback-boat-seat-cover-navy-ripstop-polyester-36-x-40-x-20","title":"Taylor Made Products 80245 Large Swingback Boat Seat Cover - Navy Ripstop Polyester, 36 x 40 x 20 Inches","description":"\u003cp\u003eThe Taylor Made Products 80245 is a large swingback boat seat cover made from navy ripstop polyester, built to shield large swingback seats from sun, rain, and abrasion while docked or in storage. The ripstop weave resists tearing and UV breakdown, so seating upholstery underneath stays cleaner and lasts longer in demanding marine conditions. It is sized specifically for large swingback seats at 36 inches high by 40 inches wide by 20 inches deep, giving a fitted, secure cover rather than a loose universal drape. The cover is part of Taylor Made's line of seat and console covers, each cut to the dimensions of a specific seat or console style. Owners use it to protect swingback boat seats between outings, during winter storage, or whenever the boat is moored and exposed to weather. Because it is made specifically for the large swingback seat profile, it holds its shape and coverage better than a generic one-size cover would on this seat style.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 80245\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Large Swingback Boat Seat Cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 36 inches H x 40 inches W x 20 inches D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Navy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Ripstop Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011090300\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size seat does the Taylor Made 80245 cover fit?\u003c\/strong\u003e The 80245 is sized for large swingback boat seats measuring 36 inches high by 40 inches wide by 20 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this seat cover?\u003c\/strong\u003e The Taylor Made 80245 comes in navy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 80245 cover made from?\u003c\/strong\u003e It is made from ripstop polyester, a tear-resistant fabric designed to hold up to UV exposure, rain, and abrasion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 80245 seat cover weigh?\u003c\/strong\u003e The Taylor Made 80245 weighs 3.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cover fit small or medium center console seats too?\u003c\/strong\u003e No, part number 80245 is cut specifically for large swingback seats at 36 x 40 x 20 inches; Taylor Made Products sells separate cover part numbers sized for small and medium center consoles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 80245 waterproof?\u003c\/strong\u003e The ripstop polyester used in the 80245 is designed to resist rain and moisture as well as sun exposure, helping protect the seat underneath from weather damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cover protect against sun damage?\u003c\/strong\u003e Yes, the ripstop polyester construction of the Taylor Made 80245 is built to resist UV breakdown, helping prevent sun fading and cracking on the seat below.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 80245 an OEM Taylor Made part or aftermarket?\u003c\/strong\u003e The 80245 is a genuine Taylor Made Products part, not an aftermarket reproduction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 80245?\u003c\/strong\u003e Ordering the 80245 gets you one navy ripstop polyester cover sized for a large swingback boat seat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 80245 for long-term storage as well as daily docking?\u003c\/strong\u003e Yes, the durable ripstop polyester of the Taylor Made 80245 is suited to both short-term dock protection and longer winter storage of the seat.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989676077275,"sku":"NAT-80245","price":48.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/nat-80245_lg__66517.1722363004.500.750.jpg?v=1785188851"},{"product_id":"taylor-made-quick-on-boat-cover-tie-down-kit-8-pack-of-8-ft-straps-mpn-55748","title":"Taylor Made Boat Cover Tie Down Kit 55748, 8-Pack of 8 Foot Nylon Straps","description":"\u003cp\u003eThe Taylor Made Boat Cover Tie Down Kit (part number 55748) is an 8-pack of nylon straps built to hold a boat cover securely in place during storage or trailering. Each strap measures 8 feet in length, giving enough reach to wrap around a hull, trailer frame, or cover grommets and cinch down tight so wind and road vibration cannot work the cover loose. The straps are made from nylon for durability against repeated tensioning and outdoor exposure. This kit ships as a set of 8 individual tie downs, making it a straightforward way to replace worn or missing tie downs from a factory Taylor Made boat cover or to add extra secure points to an existing setup. The compact kit weighs 1 pound and is sized for easy storage in a boat locker or tow vehicle. Whether you are prepping a boat for the road or securing it at the dock, this tie down kit gives you the hardware needed to keep a cover from flapping, shifting, or pulling free.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 55748\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e 8 tie down straps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Length:\u003c\/strong\u003e 8 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Weight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 12.37 x 8.5 x 1.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 10.91 x 7.8 x 1.93 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011557483\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many tie downs come in the Taylor Made 55748 kit?\u003c\/strong\u003e The Taylor Made Boat Cover Tie Down Kit 55748 includes 8 nylon tie down straps in a single kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is each strap in this tie down kit?\u003c\/strong\u003e Each strap in the 55748 kit measures 8 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the tie down straps made from?\u003c\/strong\u003e The straps in the Taylor Made 55748 tie down kit are made from nylon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made tie down kit weigh?\u003c\/strong\u003e The Taylor Made Boat Cover Tie Down Kit 55748 weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is part number 55748 used for?\u003c\/strong\u003e Part number 55748 is a Taylor Made boat cover tie down kit used to secure a boat cover so it does not shift or come loose during storage or trailering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the item dimensions of this tie down kit?\u003c\/strong\u003e The Taylor Made 55748 tie down kit measures 12.37 x 8.5 x 1.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions when this kit ships?\u003c\/strong\u003e The 55748 tie down kit ships in packaging measuring 10.91 x 7.8 x 1.93 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Taylor Made product?\u003c\/strong\u003e Yes, part number 55748 is a genuine Taylor Made boat cover tie down kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 55748 kit?\u003c\/strong\u003e The box contains one kit of 8 nylon tie down straps, each 8 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this tie down kit come with a warranty?\u003c\/strong\u003e The Taylor Made 55748 tie down kit is covered by a limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made 55748 tie down kit?\u003c\/strong\u003e The UPC for the Taylor Made Boat Cover Tie Down Kit 55748 is 040011557483.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989777264859,"sku":"NAT-55748","price":40.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51uVs_H6oRL.jpg?v=1784487853"},{"product_id":"garelick-boat-cover-support-pole-94304-26-to-48-inch-telescoping-pin-tip-for-grommet-anodized-aluminum-set-of-4","title":"Garelick Boat Cover Support Pole 94304, 26 to 48 Inch Telescoping, Pin Tip for Grommet, Anodized Aluminum, Set of 4","description":"\u003cp\u003eThe Garelick 94304 Boat Cover Support Pole is a telescoping aluminum pole designed to hold a boat cover up and away from the deck, cockpit, and interior surfaces. By keeping the weather cover tight and tented rather than resting flat, it eliminates the low spots and pockets where rainwater and debris collect, which helps prevent sagging, staining, and water damage to seats, gauges, and upholstery underneath. Each pole telescopes and adjusts from 26 inches to 48 inches, then locks at the desired length with a simple twist-to-lock, twist-to-unlock action, so no tools are needed to set up or break down the support system. The pin tip is made to seat into the grommet of a boat cover, holding the pole in place while the cover is on. The pole body is anodized aluminum, which resists corrosion from sun, rain, and marine humidity, making it suitable for regular use as a stowable pedestal system that can be broken down and stored when the boat is in use. The Garelick 94304 is sold as a set of 4 poles, giving enough support points to tent a standard cover across the length of most boats. It is a straightforward, durable accessory for boat owners who want to extend the life of their cover and protect the interior from trapped moisture.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Garelick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 94304\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Boat cover support pole (pedestal system)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Length Range:\u003c\/strong\u003e 26 inches to 48 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Style:\u003c\/strong\u003e Pin tip for grommet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Twist to lock and unlock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Set of 4 poles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 4.76 x 3.27 x 37.24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions (L x W x H):\u003c\/strong\u003e 28.2 x 1 x 0.9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 038203943046\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Garelick 94304 boat cover support pole used for?\u003c\/strong\u003e The Garelick 94304 is a telescoping support pole that props up a boat cover so it sheds water instead of pooling in low spots, which helps protect the boat interior from trapped moisture and staining.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length range does the Garelick 94304 adjust to?\u003c\/strong\u003e It telescopes and locks anywhere from 26 inches to 48 inches, letting you match the pole height to the cover and the area of the boat you are supporting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many poles come in the Garelick 94304 set?\u003c\/strong\u003e The Garelick 94304 is sold as a set of 4 poles, which is generally enough to tent a standard boat cover across multiple support points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Garelick 94304 attach to the boat cover?\u003c\/strong\u003e It uses a pin tip designed to seat into the grommet on a boat cover, holding the pole in place under the cover while it is set up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you adjust and lock the length of the Garelick 94304?\u003c\/strong\u003e Twist the pole to unlock it, extend or shorten it to the desired length between 26 inches and 48 inches, then twist again to lock it in place, no tools required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Garelick 94304 support pole made from?\u003c\/strong\u003e The Garelick 94304 is made from anodized aluminum, which resists corrosion in the sun, rain, and humid marine conditions it is typically used in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Garelick 94304 poles be stored when not in use?\u003c\/strong\u003e Yes, the poles are a stowable pedestal system, so they can be broken down and stored aboard when the cover is off and the boat is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Garelick 94304 weigh?\u003c\/strong\u003e The Garelick 94304 support pole set weighs 0.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Garelick 94304 work with any boat cover?\u003c\/strong\u003e The pole's pin tip is designed to fit into a standard cover grommet, so it works with boat covers that have grommets sized to accept the pin tip; it is not designed for covers without grommets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat problem does using a support pole under a boat cover solve?\u003c\/strong\u003e Without a support pole, a boat cover can sag and form pockets that trap rainwater, adding weight and causing water damage; the Garelick 94304 tents the cover to eliminate those low spots.\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":49027992355035,"sku":"GAR-94304","price":58.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61Nc1gJnM3L.jpg?v=1785331123"},{"product_id":"garelick-eez-in-boat-cover-support-pole-94305-telescoping-36-64-inch-pin-tip-set-of-4","title":"Garelick\/EEz-In Boat Cover Support Pole 94305, Telescoping 36-64 Inch, Pin Tip, Set of 4","description":"\u003cp\u003eThe Garelick\/EEz-In cover support pole, part number 94305, is a telescoping aluminum pole designed to hold a boat's weather cover up off the deck, windshield, and hardware. By propping the cover into a peak instead of letting it lie flat, the pole eliminates the low spots and pockets where rainwater collects, which helps prevent staining, mildew, and long-term damage to both the cover and the boat's interior.\u003c\/p\u003e\u003cp\u003eEach pole telescopes from 36 inches to 64 inches and uses a twist-to-lock mechanism, so it can be extended to the height needed and locked firmly in place without additional hardware. The pin tip on the pole is made to seat into a grommet on the cover, holding the pole in position while the cover is on. The pole body is anodized aluminum, which resists corrosion from marine exposure and saltwater environments. It is finished in silver and is part of a stowable pedestal system, making it easy to collapse and store when the cover is off the boat. This listing is for a set of 4 poles (part number 94305), giving enough support points to keep a standard weather cover tight and evenly tensioned across the boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Garelick\/EEz-In\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 94305\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Boat Cover Support Pole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Range:\u003c\/strong\u003e 36 inches to 64 inches (telescoping)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Style:\u003c\/strong\u003e Pin tip for grommet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Twist to lock and unlock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Set of 4 poles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.83 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4.76 x 3.27 x 37.24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 038203943053\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e 3004.1967\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat length does the Garelick 94305 cover support pole extend to?\u003c\/strong\u003e It telescopes from 36 inches up to 64 inches, adjusted with a twist-to-lock mechanism to match the height of the boat cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many poles are included in this set?\u003c\/strong\u003e Four poles come in this set, all under part number 94305.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 94305 support pole made from?\u003c\/strong\u003e The pole is made from anodized aluminum, which resists corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of tip does this pole have?\u003c\/strong\u003e It has a pin tip, made to fit directly into a grommet on the boat cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this pole stop water from pooling on my cover?\u003c\/strong\u003e Yes, propping the cover with support poles like the 94305 eliminates the low pockets where water collects, which helps prevent damage to the cover and boat interior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the pole lock at the length I need?\u003c\/strong\u003e Twist the pole to lock or unlock it, then telescope it to the desired length between 36 and 64 inches before locking it in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Garelick 94305 pole?\u003c\/strong\u003e It is finished in silver.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the set weigh?\u003c\/strong\u003e The 94305 cover support pole set weighs 0.83 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of this item?\u003c\/strong\u003e The item measures 4.76 x 3.27 x 37.24 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 94305 pole water resistant?\u003c\/strong\u003e Yes, it is rated water resistant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat model number is associated with this part?\u003c\/strong\u003e Model number 3004.1967 corresponds to Garelick part number 94305.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan these poles be stowed easily when not in use?\u003c\/strong\u003e Yes, the 94305 pole is part of a stowable pedestal system, so it collapses down for easy storage when the cover is off.\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":49027992387803,"sku":"GAR-94305","price":59.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/21V-ekiU6kL.jpg?v=1785331042"},{"product_id":"shrink-wrap-international-boat-shrink-wrap-sfhm0732100w-7-mil-32-ft-x-100-ft-white","title":"Shrink Wrap International Boat Shrink Wrap SFHM0732100W, 7 Mil, 32 ft x 100 ft, White","description":"\u003cp\u003eThis Shrink Wrap International boat shrink wrap (part number SFHM0732100W) is a 7 mil white shrink film sized 32 feet by 100 feet, built for heavy-duty boat shrink wrapping, storage, and shipping applications. It is manufactured from premium-grade polyethylene using 100% virgin resin, giving it excellent two-directional shrink properties and toughness so the finished cover pulls down tight and even over hulls, towers, and other irregular shapes without shifting or chafing the boat underneath.\u003c\/p\u003e\u003cp\u003eThe film is formulated with UV inhibitors that provide 12 months of UV protection, along with additives designed to resist degradation from sunlight, rain, chemicals, and heat, making it suitable for both moderate-climate outdoor storage and general industrial or commercial covering needs. Each roll of this 32 foot by 100 foot size yields 3,200 square feet of coverage. The film is made in the U.S.A. And meets ASTM D1593, ASTM D4397-91, ASTM D882, ASTM D4635-91, ASTM D1709, ASTM D1922, ASTM D2732, and ASTM G53 industry specifications, as well as Federal Specifications LP-378, LP-390, and LP-512.\u003c\/p\u003e\u003cp\u003eCompared to a tarp, this shrink wrap forms a glove-like, form-fitting cover once heat-shrunk, sealing out moisture and debris while resisting wind-driven movement that causes chafing and abrasion.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shrink Wrap International\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SFHM0732100W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 32 feet x 100 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Area:\u003c\/strong\u003e 3,200 square feet per roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 7 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Premium-grade polyethylene, 100% virgin resin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Protection:\u003c\/strong\u003e 12 month UV protection with UV inhibitors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShrink Type:\u003c\/strong\u003e Two-directional shrink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 107 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Specifications:\u003c\/strong\u003e ASTM D1593, ASTM D4397-91, ASTM D882, ASTM D4635-91, ASTM D1709, ASTM D1922, ASTM D2732, ASTM G53\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFederal Specifications:\u003c\/strong\u003e LP-378, LP-390, LP-512\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the SFHM0732100W shrink wrap roll?\u003c\/strong\u003e The SFHM0732100W roll measures 32 feet by 100 feet, yielding 3,200 square feet of coverage per roll.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick is this shrink wrap?\u003c\/strong\u003e This Shrink Wrap International film is 7 mil thick, suited for heavy-duty boat shrink wrapping, storage, and shipping applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does SFHM0732100W come in?\u003c\/strong\u003e It is available in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the shrink wrap made from?\u003c\/strong\u003e SFHM0732100W is made from premium-grade polyethylene using 100% virgin resin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much UV protection does this shrink wrap provide?\u003c\/strong\u003e The film includes UV inhibitors that provide 12 months of UV protection against degradation from sunlight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this shrink wrap resist weather and chemical exposure?\u003c\/strong\u003e Yes, SFHM0732100W is formulated with additives designed to resist degradation from sunlight, rain, chemicals, and heat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this shrink wrap two-directional?\u003c\/strong\u003e Yes, this Shrink Wrap International film has two-directional shrink properties, allowing it to pull tight and even over irregular shapes like a boat hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a roll of SFHM0732100W weigh?\u003c\/strong\u003e A roll of this 32 foot by 100 foot shrink wrap weighs 107 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs boat shrink wrap better than a tarp for winter storage?\u003c\/strong\u003e Shrink wrap forms a glove-like, form-fitting cover once heat-shrunk, so unlike a tarp it will not shift or chafe the boat, and it seals out moisture and debris more effectively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this shrink wrap manufactured?\u003c\/strong\u003e SFHM0732100W is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat industry specifications does this shrink wrap meet?\u003c\/strong\u003e It meets ASTM D1593, ASTM D4397-91, ASTM D882, ASTM D4635-91, ASTM D1709, ASTM D1922, ASTM D2732, and ASTM G53, along with Federal Specifications LP-378, LP-390, and LP-512.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this shrink wrap be used for applications other than boats?\u003c\/strong\u003e Yes, the 7 mil film is versatile enough for shipping and storage applications in addition to boat shrink wrapping.\u003c\/p\u003e","brand":"Poly America","offers":[{"title":"Default Title","offer_id":49028226285787,"sku":"P-A-SFHM0732100W","price":423.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/P-A-SFHM0732100__85692.1763741656.500.750.jpg?v=1785165268"},{"product_id":"shrink-wrap-international-shrink-wrap-vent-self-adhesive-plastic-boat-cover-vent-062a","title":"Shrink Wrap International Shrink Wrap Vent, Self-Adhesive Plastic Boat Cover Vent (062A)","description":"\u003cp\u003eThe Shrink Wrap International Shrink Wrap Vent is a self-adhesive plastic vent designed to keep boats dry and protected while stored under shrink wrap. Proper air circulation is one of the biggest factors in preventing moisture buildup, condensation, and mildew inside a shrink-wrapped boat, and this vent gives trapped humid air a path to escape while keeping rain and snow out. It is built from durable, lightweight plastic that holds up through winter weather without adding noticeable weight to the shrink wrap covering.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward thanks to the self-adhesive backing, which allows the vent to be pressed directly onto the shrink wrap film without additional tools, tape, or hardware. This makes it a practical addition for anyone winterizing or storing a boat outdoors for an extended period, whether it is a small runabout or a larger vessel. Because the vent works in any climate, it is suited to boats stored in humid coastal regions as well as colder inland areas where temperature swings can accelerate condensation. Adding one or more of these vents to a shrink wrap installation helps protect upholstery, electronics, and other interior components from moisture damage over the off-season.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shrink Wrap International\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 062A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Shrink Wrap Vent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Self-Adhesive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Function:\u003c\/strong\u003e Air circulation to prevent moisture buildup and mildew under boat shrink wrap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 80078982\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Shrink Wrap International Shrink Wrap Vent (062A) do?\u003c\/strong\u003e It allows air to circulate under a boat's shrink wrap covering, which helps prevent moisture buildup and mildew during storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 062A vent installed?\u003c\/strong\u003e It has a self-adhesive backing, so it presses directly onto the shrink wrap film without tools, tape, or fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Shrink Wrap International vent made from?\u003c\/strong\u003e It is made from durable, lightweight plastic built to hold up through outdoor storage conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the shrink wrap vent weigh?\u003c\/strong\u003e The 062A vent weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this vent work in cold winter climates?\u003c\/strong\u003e Yes, the Shrink Wrap International vent is designed to work in any climate, including cold winter storage conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this vent be used on any boat size?\u003c\/strong\u003e The 062A vent is designed for boats stored outdoors under shrink wrap generally, without a size-specific restriction stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does shrink-wrapped boat storage need vents?\u003c\/strong\u003e Sealed shrink wrap can trap humid air against the boat's surfaces, and without airflow that moisture leads to condensation and mildew; a vent like the 062A gives that air a way out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the shrink wrap vent reusable?\u003c\/strong\u003e The listing describes the 062A as a self-adhesive vent for installation on shrink wrap film; it is not specified as reusable across multiple shrink wrap applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the vent protect against rain and snow getting in?\u003c\/strong\u003e Yes, the Shrink Wrap International vent is designed to let air circulate while still keeping the interior of the shrink wrap protected from moisture intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for this Shrink Wrap International vent?\u003c\/strong\u003e The part number is 062A.\u003c\/p\u003e","brand":"Shrink Wrap International","offers":[{"title":"Default Title","offer_id":49028237426907,"sku":"SWS-062A","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sws-062a_lg__00203.1558132752.500.750.jpg?v=1785165474"},{"product_id":"shrink-wrap-international-ex6120se-15-boat-shrink-wrap-heat-gun-341-000-btu-titanium-nozzle-15-3-4-inch-neck","title":"Shrink Wrap International EX6120SE-15 Boat Shrink Wrap Heat Gun, 341,000 BTU Titanium Nozzle, 15-3\/4 Inch Neck","description":"\u003cp\u003eThe Shrink Wrap International EX6120SE-15 Boat Shrink Wrap Heat Gun is a propane fueled heat source built for shrinking boat shrink wrap film during winterization. Through use of the trigger, this heat gun puts out up to 341,000 BTUs at maximum power and is variable down to 10,000 BTUs, giving control over how quickly and evenly the film shrinks around the vessel. The complete unit includes a quick disconnect trigger handle, a 15-3\/4 inch neck, a 60 PSI fixed regulator, a 341,000 BTU titanium nozzle, and a 25 foot hose that connects to a propane tank, keeping the operator at a safe working distance from the flame.\u003c\/p\u003e\u003cp\u003eTo operate, the regulator is attached to the propane tank and the hose is connected to the torch before the propane is turned on. The torch regulator is then opened just enough to hear gas flow, the torch is lit, and the pilot flame is kept low enough that it will not blow out when the trigger is pulled, but high enough to remain visible at all times, since shrinking should never be done where the flame cannot be seen. The trigger should be released when pausing or changing direction across the shrink wrap surface. Combined with Shrink Wrap International strapping and shrink wrap film, this heat gun forms a complete system for sealing a boat cover before the off-season.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shrink Wrap International\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e EX6120SE-15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat Source:\u003c\/strong\u003e Propane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Heat Output:\u003c\/strong\u003e 341,000 BTU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Heat Output:\u003c\/strong\u003e 10,000 BTU (variable via trigger)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeck Length:\u003c\/strong\u003e 15-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulator:\u003c\/strong\u003e 60 PSI fixed regulator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Material:\u003c\/strong\u003e Titanium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 489394319469\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Quick disconnect handle, 15-3\/4 inch neck, 60 PSI fixed regulator, 341,000 BTU titanium nozzle, 25 foot hose\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum heat output of the EX6120SE-15 heat gun?\u003c\/strong\u003e The EX6120SE-15 heat gun puts out up to 341,000 BTUs at maximum power through its titanium nozzle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the heat output be adjusted?\u003c\/strong\u003e Yes, the EX6120SE-15 is variable from 10,000 BTUs up to 341,000 BTUs, controlled through use of the trigger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuel does this heat gun use?\u003c\/strong\u003e The Shrink Wrap International EX6120SE-15 is a propane fueled heat gun rather than an electric heat gun.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included with the EX6120SE-15?\u003c\/strong\u003e This heat gun includes a quick disconnect trigger handle, a 15-3\/4 inch neck, a 60 PSI fixed regulator, a 341,000 BTU titanium nozzle, and a 25 foot hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the hose on this shrink wrap heat gun?\u003c\/strong\u003e The EX6120SE-15 comes with a 25 foot hose connecting the torch to the propane tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the EX6120SE-15 weigh?\u003c\/strong\u003e The Shrink Wrap International EX6120SE-15 heat gun weighs 4.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the nozzle made of?\u003c\/strong\u003e The EX6120SE-15 uses a 341,000 BTU titanium nozzle mounted on a 15-3\/4 inch neck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I light and use this heat gun?\u003c\/strong\u003e To use the EX6120SE-15, attach the regulator to the propane tank with the propane off, connect the hose to the torch, turn the propane tank fully on, open the torch regulator just enough to hear gas flow, and light the torch to establish a pilot flame; keep the flame low enough that it will not blow out when the trigger is pulled, and release the trigger when pausing or changing direction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it safe to shrink wrap where I cannot see the flame?\u003c\/strong\u003e No, the EX6120SE-15 should never be used to shrink film in a spot where the flame cannot be seen, since the plastic can ignite.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this heat gun used for?\u003c\/strong\u003e The EX6120SE-15 is used to shrink boat shrink wrap film around a vessel during winterization, working alongside shrink wrap strapping and film.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the EX6120SE-15 require a separate propane tank?\u003c\/strong\u003e Yes, the heat gun's 60 PSI fixed regulator and 25 foot hose are designed to connect to a propane tank, which is supplied separately.\u003c\/p\u003e","brand":"Shrink Wrap International","offers":[{"title":"Default Title","offer_id":49028239196379,"sku":"SWS-EX6120SE-15","price":415.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SWS-6120SE-15__96889.1722497585.500.750.jpg?v=1785165474"},{"product_id":"tempress-small-fold-down-boat-seat-cover-600-denier-polyester-fits-navistyle-low-back-and-all-weather-seats","title":"Tempress Small Fold Down Boat Seat Cover, 600 Denier Polyester, Fits NaviStyle Low-Back and All Weather Seats","description":"\u003cp\u003eThe Tempress Small Fold Down Seat Cover protects Tempress NaviStyle low-back boat seats and Tempress All Weather boat seats from sun, rain, and everyday marine wear. It is made from fade and water-resistant 600 denier polyester with a water repellent top coat, so it sheds moisture and resists UV fading during storage or transport. Stainless steel eyelets and an adjustable cord let the cover cinch down snugly around the seat base for a secure, wind-resistant fit, and the fabric has enough stretch to work as a universal cover for low-back and small fold-down boat seats. Whether you are protecting a brand-new Tempress seat or extending the life of an existing one, this cover offers a simple, affordable way to keep it looking and performing like new. It is backed by a 1 year manufacturer's warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tempress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 58006\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 079035580061\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Boat Seat Cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Tempress NaviStyle low-back boat seats and Tempress All Weather boat seats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 600 denier polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Water repellent top coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Stainless steel eyelets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e Adjustable cord\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 18 inches W x 18 inches H x 19 inches D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.63 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year manufacturer's warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTempress NaviStyle low-back boat seats\u003c\/li\u003e\n\u003cli\u003eTempress All Weather boat seats\u003c\/li\u003e\n\u003cli\u003eUniversal stretch fit for low-back and small fold-down boat seats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat seats does the Tempress 58006 seat cover fit?\u003c\/strong\u003e The Tempress 58006 is designed to fit Tempress NaviStyle low-back boat seats and Tempress All Weather boat seats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this seat cover fully waterproof?\u003c\/strong\u003e It is water-resistant rather than fully waterproof: the 58006 cover is made from fade and water-resistant 600 denier polyester with a water repellent top coat that sheds rain and spray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Tempress Small Fold Down Seat Cover made from?\u003c\/strong\u003e It is made from 600 denier polyester, a fade-resistant, water-resistant fabric commonly used for marine covers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cover stay attached to the seat?\u003c\/strong\u003e Stainless steel eyelets and an adjustable cord let you cinch the Tempress 58006 cover snugly around the base of the seat so it stays in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Tempress 58006?\u003c\/strong\u003e The cover measures 18 inches wide by 18 inches high by 19 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Tempress 58006 seat cover weigh?\u003c\/strong\u003e 0.63 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cover work on a fold-down seat that isn't a Tempress brand seat?\u003c\/strong\u003e The fabric has enough stretch to act as a universal fit for low-back and small fold-down boat seats, though it is designed and specified to fit Tempress NaviStyle low-back and Tempress All Weather seats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Tempress Small Fold Down Seat Cover?\u003c\/strong\u003e Black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Tempress 58006 come with a warranty?\u003c\/strong\u003e Yes, it is backed by a 1 year manufacturer's warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when you order the Tempress 58006?\u003c\/strong\u003e You receive the Tempress Small Fold Down Seat Cover itself; no additional hardware or accessories are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Tempress 58006 protect against sun fading?\u003c\/strong\u003e Yes, the 600 denier polyester used in the Tempress 58006 is fade-resistant, which helps protect the underlying seat material from UV damage during storage or transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Tempress 58006 and the Tempress 58007 seat cover?\u003c\/strong\u003e The 58006 is sized and shaped for small fold-down boat seats, while the Tempress 58007 is a larger cover built for non-folding helm seats, including the Tempress Elite Helm Seat.\u003c\/p\u003e","brand":"Tempress","offers":[{"title":"Default Title","offer_id":49028301160667,"sku":"TMP-58006","price":25.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/58006__45369.1722499538.500.750.jpg?v=1785165664"},{"product_id":"tempress-premium-helm-seat-cover-58007-fits-tempress-elite-helm-seat-black","title":"Tempress Premium Helm Seat Cover 58007 - Fits Tempress Elite Helm Seat, Black","description":"\u003cp\u003eThe Tempress Premium Helm Seat Cover (58007) protects non-folding helm seats from sun, salt, and harsh marine conditions when the boat is docked or in storage. It is built from heavy-duty, water-resistant 600 denier polyester with a water repellent top coat, so it resists UV rays, mold, and mildew for long-lasting wear. Stainless steel eyelets combined with an adjustable cord let you cinch the cover down for a secure, optimal fit that stays in place even in windy conditions, making it practical for both storage and travel.\u003c\/p\u003e\u003cp\u003eThis cover is sized and shaped for Tempress non-folding helm seats, including the Tempress Elite Helm Seat, and its stretch fit gives it broad coverage across that seat style. Whether you are preserving a new seat or extending the life of an existing one, the 58007 cover offers a simple, reliable way to guard against fading, staining, and weather damage between outings. It is backed by a 1 year manufacturer warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tempress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 58007\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Helm Seat Cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 600 Denier Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Water Repellent Top Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Stainless Steel Eyelets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit:\u003c\/strong\u003e Adjustable Cord for Optimal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 24 inches W x 26 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Manufacturer Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 079035580078\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTempress non-folding helm seats, including the Tempress Elite Helm Seat\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat seats does the Tempress 58007 helm seat cover fit?\u003c\/strong\u003e The Tempress 58007 is designed for Tempress non-folding helm seats, including the Tempress Elite Helm Seat, and its stretch fit gives it broad coverage across that seat style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Tempress Premium Helm Seat Cover made from?\u003c\/strong\u003e It is made from 600 denier polyester with a water repellent top coat, chosen for fade resistance and resistance to UV rays, mold, and mildew.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of part number 58007?\u003c\/strong\u003e The Tempress 58007 helm seat cover measures 24 inches wide by 26 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cover stay secured to the seat?\u003c\/strong\u003e Stainless steel eyelets and an adjustable cord let you cinch the Tempress 58007 down for a secure fit that holds even in windy conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cover work on a folding boat seat?\u003c\/strong\u003e No, the Tempress 58007 is made for non-folding helm seats; Tempress offers a separate small fold-down seat cover (58006) for low-back and fold-down seats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Tempress 58007 waterproof?\u003c\/strong\u003e It is water-resistant, not fully waterproof: the 600 denier polyester has a water repellent top coat that sheds rain and spray while the boat is stored or in transit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Tempress helm seat cover weigh?\u003c\/strong\u003e The Tempress 58007 helm seat cover weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on the Tempress Premium Helm Seat Cover?\u003c\/strong\u003e Yes, the Tempress 58007 is backed by a 1 year manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 58007?\u003c\/strong\u003e The Tempress 58007 helm seat cover is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cover be used for travel as well as storage?\u003c\/strong\u003e Yes, the adjustable, secure fit of the Tempress 58007 keeps it in place during travel as well as long-term storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Tempress 58007 seat cover?\u003c\/strong\u003e The UPC for the Tempress Premium Helm Seat Cover, part number 58007, is 079035580078.\u003c\/p\u003e","brand":"Tempress","offers":[{"title":"Default Title","offer_id":49028301193435,"sku":"TMP-58007","price":33.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/58007__37343.1739462883.500.750.jpg?v=1785165664"},{"product_id":"vico-plastics-boat-vent-ii-boat-cover-vent-black-uv-inhibited-plastic","title":"Vico Plastics Boat Vent II Boat Cover Vent, Black, UV-Inhibited Plastic","description":"\u003cp\u003eThe Boat Vent II (BV2) from Vico Plastics is a boat cover vent designed to repair and upgrade boat covers by adding proper airflow. Installing a Boat Vent II lets warm, moist air escape from an enclosed boat cover, helping to reduce moisture buildup, prevent mildew and mold, and extend the life of the boat's upholstery and cover. The vent is molded from UV-inhibited plastic, giving it long-term resistance to harsh sun exposure, saltwater conditions, and extreme weather, and it carries a water-resistant rating so it holds up in rain and spray.\u003c\/p\u003e\u003cp\u003eInstallation requires no special tools and follows the same simple method as before: the vent is pulled apart and fitted directly into the boat cover material. Note that Boat Cover Vents are now assembled with the lower washer upside-down; this updated assembly allows the vent to be pulled apart much more quickly and easily than the previous version, while the installation steps in the cover remain the same. The Boat Vent II offers a universal fit, making it compatible with custom and semi-custom marine covers, and it can be paired with a cam-lock support pole (sold separately) for added support and to help prevent water from pooling on the cover. It is manufactured in the United States.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Vico Plastics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e BV2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bimini Top Hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-Inhibited Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 4 x 4 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 004340026282\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Protection:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Support Poles \u0026amp; Systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Vico Plastics BV2 Boat Vent II used for?\u003c\/strong\u003e The BV2 Boat Vent II is a boat cover vent that vents and tents boat covers, letting warm, moist air escape to help prevent mildew and mold buildup underneath the cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Boat Vent II fit my boat cover?\u003c\/strong\u003e Yes, the BV2 is designed with a universal fit and is compatible with custom and semi-custom marine boat covers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the BV2 boat vent available in?\u003c\/strong\u003e The BV2 Boat Vent II is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Boat Vent II made from?\u003c\/strong\u003e It is molded from UV-inhibited plastic, which resists degradation from sun exposure, saltwater conditions, and extreme weather.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install the BV2 Boat Vent II?\u003c\/strong\u003e No special tools are required; the vent is pulled apart and fitted into the boat cover using the same installation method as before, even with the updated washer assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the lower washer on the Boat Vent II now assembled upside-down?\u003c\/strong\u003e Vico Plastics changed the BV2 assembly so the lower washer sits upside-down, which allows the vent to be pulled apart much more quickly and easily than the prior version, while the cover installation steps stay the same.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Boat Vent II water resistant?\u003c\/strong\u003e Yes, the BV2 carries a water-resistant rating and is built to withstand rain and saltwater conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the BV2 boat vent?\u003c\/strong\u003e The Boat Vent II measures 4 x 4 x 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Boat Vent II weigh?\u003c\/strong\u003e The BV2 Boat Vent II weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Boat Vent II (BV2) and Boat Vent III (BV3)?\u003c\/strong\u003e Boat Vent III is an improvement on the BV2, offering 40% more venting, an overhanging top that lets in less moisture, 30 teeth on the washer for a better grip, and an ergonomic reversible nut for easier installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Boat Vent II come with a support pole?\u003c\/strong\u003e No, the BV2 vent does not include a support pole; a cam-lock support pole is sold separately and can be paired with the vent to help prevent water pooling on the cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Boat Vent II made in the USA?\u003c\/strong\u003e Yes, the Boat Vent II is made in the United States.\u003c\/p\u003e","brand":"Vico Plastics","offers":[{"title":"Default Title","offer_id":49029701894363,"sku":"V-P-BV2","price":9.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/V-P-BV2_lg__96205.1558135187.500.750.jpg?v=1785165878"},{"product_id":"vico-plastics-boat-vent-iii-boat-cover-vent-uv-resistant-plastic-universal-fit","title":"Vico Plastics Boat Vent III Boat Cover Vent, UV-Resistant Plastic, Universal Fit","description":"\u003cp\u003eThe Vico Plastics Boat Vent III is a boat cover vent designed to reduce moisture buildup and prevent mildew and mold under a covered boat. It is molded from a highly UV-inhibited plastic and can be installed into virtually any boat cover. Boat Vent III is an improvement on the earlier Boat Vent II, adding 40% more venting area, an overhanging top design that allows in less moisture, 30 teeth on the washer for a stronger grip on the cover fabric, and an ergonomic reversible nut that makes installation easier. The vent is assembled with the lower washer installed upside-down, which allows the vent to be pulled apart more quickly and easily than earlier versions while still installing into the cover the same way as before. This design helps keep air circulating under a boat cover during storage, reducing trapped humidity that can lead to mildew, mold, and musty odors. Boat Vent III is a simple, low-cost way to protect a covered boat's interior and upholstery between uses.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Vico Plastics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e BV3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Boat Vent III Boat Cover Vent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 303032103030\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Support Poles \u0026amp; Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Bimini Top Hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV inhibited plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.29 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWasher Teeth:\u003c\/strong\u003e 30 teeth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNut Design:\u003c\/strong\u003e Ergonomic reversible nut\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Vico Plastics Boat Vent III used for?\u003c\/strong\u003e Boat Vent III is a boat cover vent that installs into a boat cover to allow air circulation underneath, helping prevent the mildew, mold, and musty odors that can build up in a closed-up covered boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill Boat Vent III fit my boat cover?\u003c\/strong\u003e Boat Vent III (part number BV3) is molded to install into virtually any boat cover, since it mounts directly to the cover fabric rather than to a specific boat model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is Boat Vent III different from Boat Vent II?\u003c\/strong\u003e Boat Vent III improves on Boat Vent II with 40% more venting area, an overhanging top that lets in less moisture, 30 teeth on the washer for a better grip on the cover, and an ergonomic reversible nut for easier installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Boat Vent III made from?\u003c\/strong\u003e The BV3 vent is molded from a highly UV-inhibited plastic, which is intended to hold up to sun exposure while installed in an outdoor boat cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Boat Vent III weigh?\u003c\/strong\u003e The Vico Plastics Boat Vent III weighs 0.29 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the lower washer installed upside-down?\u003c\/strong\u003e Boat Vent III ships with the lower washer assembled upside-down, which allows the vent to be pulled apart more quickly and easily than earlier versions; it still installs into the cover the same way as before.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the reversible nut make installation easier?\u003c\/strong\u003e Yes, Boat Vent III features an ergonomic reversible nut designed specifically to make installing the vent into a boat cover easier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many vents come in the package?\u003c\/strong\u003e The Boat Vent III (BV3) listing is for a single boat cover vent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 30-tooth washer do?\u003c\/strong\u003e The washer on Boat Vent III has 30 teeth, which give it a better grip on the boat cover fabric compared to the earlier Boat Vent II design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of hardware is Boat Vent III classified as?\u003c\/strong\u003e Boat Vent III is classified as bimini top hardware, within the broader category of support poles and systems for boat covers.\u003c\/p\u003e","brand":"Vico Plastics","offers":[{"title":"Default Title","offer_id":49029701861595,"sku":"V-P-BV3","price":11.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/BoatVentIII__32478.1722507295.500.750.jpg?v=1785165878"},{"product_id":"poly-america-shrink-wrap-sf0617120w-17-x-120-feet-6-mil-white","title":"Poly America Shrink Wrap SF0617120W, 17 x 120 Feet, 6 Mil, White","description":"\u003cp\u003eThis Poly America shrink wrap is a 17 foot by 120 foot roll of 6 Mil polyethylene film designed for boat, jet ski, and PWC storage as well as shipping and general storage applications. Formulated from premium-grade polyethylene with UV inhibitors and other additives, the film is built to resist degradation from sunlight, rain, chemicals, and heat, and it carries 12 month UV protection. Each roll covers 2040 square feet of surface area.\u003c\/p\u003e\u003cp\u003eShrink wrapping creates a glove-like cover over a boat that will not shift or chafe the hull the way a tarp can, making it a common alternative to tarping for seasonal storage. This 6 Mil thickness is suited to two-directional shrink applications and works well for small industrial or commercial jobs in more moderate climates where heavy snow accumulation is infrequent. The film is made from 100% virgin resin and is available in white, one of several color options offered in this product line. It is manufactured in the USA and meets a range of industry and government technical specifications, including ASTM D1593, ASTM D4397-91, ASTM D882, ASTM D4635-91, ASTM D1709, ASTM D1922, ASTM D2732, ASTM G53, Federal Specification LP-378, and Federal Specification LP-390.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Poly America\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SF0617120W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 120 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 17 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 6 Mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage Area:\u003c\/strong\u003e 2040 square feet per roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyethylene (100% virgin resin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 59 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Protection:\u003c\/strong\u003e 12 month\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 073257000352\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this shrink wrap roll?\u003c\/strong\u003e The Poly America SF0617120W roll measures 17 feet wide by 120 feet long, providing 2040 square feet of coverage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thickness is this shrink wrap?\u003c\/strong\u003e This roll is 6 Mil thick, a gauge suited to two-directional shrink applications for boat, jet ski, and PWC storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options does this shrink wrap come in?\u003c\/strong\u003e This particular roll, SF0617120W, is white; the same shrink wrap line is also available in blue and clear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the shrink wrap made from?\u003c\/strong\u003e It is made from premium-grade polyethylene using 100% virgin resin, with UV inhibitors and other additives blended in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much UV protection does this shrink wrap provide?\u003c\/strong\u003e The SF0617120W film carries 12 month UV protection, helping resist degradation from sunlight over a storage season.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 6 Mil shrink wrap suitable for heavy snow climates?\u003c\/strong\u003e 6 Mil shrink wrap like this Poly America roll is best suited to small industrial or commercial applications in more moderate climates where heavy snow is infrequent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this shrink wrap good for jet skis and PWCs, or only boats?\u003c\/strong\u003e This 17 x 120 foot roll of 6 Mil shrink wrap works for winter storage of boats as well as jet skis and PWCs, and can also be used for shipping and general storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use shrink wrap instead of a tarp for boat storage?\u003c\/strong\u003e Shrink wrapping a boat with this film creates a glove-like cover that will not shift or chafe the hull, an advantage over tarps which can move and rub against the boat's surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this shrink wrap meet industry specifications?\u003c\/strong\u003e Yes, this Poly America shrink wrap meets ASTM D1593, ASTM D4397-91, ASTM D882, ASTM D4635-91, ASTM D1709, ASTM D1922, ASTM D2732, ASTM G53, Federal Specification LP-378, and Federal Specification LP-390.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a roll of this shrink wrap weigh?\u003c\/strong\u003e A roll of the SF0617120W 17 x 120 foot, 6 Mil shrink wrap weighs 59 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this shrink wrap manufactured?\u003c\/strong\u003e The Poly America SF0617120W shrink wrap is made in the USA.\u003c\/p\u003e","brand":"Poly America","offers":[{"title":"Default Title","offer_id":49031102529755,"sku":"P-A-SF0617120W","price":231.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41JCXSLrUUL.jpg?v=1785208837"},{"product_id":"poly-america-shrink-wrap-film-6-mil-clear-14-x-150-feet-boat-shrink-wrap-ds-146150c","title":"Poly-America Shrink Wrap Film 6 Mil Clear, 14 x 150 Feet, Boat Shrink Wrap DS-146150C","description":"\u003cp\u003eThis Poly-America shrink wrap film is a 6 mil, clear polyethylene sheeting designed for heavy-duty boat winterization, storage, and shipping applications. Formulated from 100% virgin resin polyethylene, it is built for excellent two-directional shrink properties and toughness, giving a boat a glove-like cover that will not shift or chafe the hull during transport or storage. The film includes UV inhibitors and other additives engineered to resist degradation from sunlight, rain, chemicals, and heat, and it carries a 12 month UV protection rating.\u003c\/p\u003e\u003cp\u003eEach roll measures 14 feet by 150 feet, covering 2250 square feet, and is manufactured to consistent QC standards. The 6 mil thickness is versatile enough for shipping, general storage, and boat shrink wrap applications, and it is well suited for small industrial or commercial jobs in more moderate climates where heavy snow is infrequent, including winter storage for jet skis and personal watercraft. This film is manufactured in the USA and meets a range of industry and federal technical specifications for shrink wrap performance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Poly-America\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e DS-146150C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 6 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 150 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 14 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Area:\u003c\/strong\u003e 2250 square feet per roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 100% virgin resin polyethylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Protection:\u003c\/strong\u003e 12 months\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 69.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 073257000321\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards Met:\u003c\/strong\u003e ASTM D1593, ASTM D4397-91, ASTM D882, ASTM D4635-91, ASTM D1709, ASTM D1922, ASTM D2732, ASTM G53, Federal Specification LP-378, Federal Specification LP-390, Federal Specification LP-512\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this Poly-America shrink wrap roll?\u003c\/strong\u003e The DS-146150C roll measures 14 feet wide by 150 feet long, covering 2250 square feet of coverage per roll.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thickness is this shrink wrap film?\u003c\/strong\u003e It is a 6 mil polyethylene film, giving it two-directional shrink strength and toughness for heavy-duty boat and industrial shrink wrap applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this roll?\u003c\/strong\u003e This particular DS-146150C roll is clear; the same 6 mil film is also produced in blue and white for buyers who want a different finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this shrink wrap UV resistant?\u003c\/strong\u003e Yes, it contains UV inhibitors and other additives that resist degradation from sunlight, rain, chemicals, and heat, and it carries a 12 month UV protection rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this shrink wrap be used for jet skis and PWCs?\u003c\/strong\u003e Yes, the 6 mil thickness of the Poly-America DS-146150C film is specifically noted as ideal for winter storage of jet skis and personal watercraft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this shrink wrap better than using a tarp for boat storage?\u003c\/strong\u003e Yes, shrink wrapping with this film provides a glove-like cover that will not shift or chafe the boat, unlike a tarp, making the Poly-America DS-146150C a more secure winter storage option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this shrink wrap made from?\u003c\/strong\u003e The DS-146150C film is made from 100% virgin resin polyethylene, manufactured to consistent quality control standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this shrink wrap suitable for heavy snow climates?\u003c\/strong\u003e This 6 mil shrink wrap is best suited to small industrial or commercial applications in more moderate climates where heavy snow is infrequent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this shrink wrap manufactured?\u003c\/strong\u003e The Poly-America DS-146150C shrink wrap film is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat industry standards does this shrink wrap meet?\u003c\/strong\u003e This film meets ASTM D1593, ASTM D4397-91, ASTM D882, ASTM D4635-91, ASTM D1709, ASTM D1922, ASTM D2732, ASTM G53, and Federal Specifications LP-378, LP-390, and LP-512.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a roll of this shrink wrap weigh?\u003c\/strong\u003e A roll of the Poly-America DS-146150C 14 x 150 foot, 6 mil shrink wrap weighs 69.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this shrink wrap be used for shipping as well as boat storage?\u003c\/strong\u003e Yes, the 6 mil thickness of this film is versatile enough for shipping and general storage applications in addition to boat shrink wrapping.\u003c\/p\u003e","brand":"Poly America","offers":[{"title":"Default Title","offer_id":49031102562523,"sku":"P-A-SF0614150C","price":238.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31UWkk2MXmL_df340840-c264-449e-a04c-73068548faad.jpg?v=1785208837"},{"product_id":"poly-america-boat-shrink-wrap-20-ft-x-100-ft-6-mil-blue","title":"Poly America Boat Shrink Wrap, 20 ft x 100 ft, 6 Mil, Blue","description":"\u003cp\u003eThis Poly America shrink wrap is a heavy-duty polyethylene film built for covering boats and other equipment during storage and transport. Measuring 20 feet wide by 100 feet long and 6 mil thick, this blue shrink wrap gives boat owners a durable, weather-resistant barrier that helps keep rain, dirt, debris, and general environmental exposure off hulls, decks, and stored gear. It is manufactured from 100% virgin polyethylene resin rather than reprocessed material, which supports consistent strength and tear resistance across the full roll.\u003c\/p\u003e\u003cp\u003eThe film includes UV inhibitors rated for 6 months of protection, so it can hold up to sustained sun exposure over a typical storage or winterizing season without breaking down prematurely. It is engineered with two-directional shrink properties, allowing the material to pull tight and conform closely around a boat's shape when installed correctly, forming a snug, waterproof enclosure rather than a loose-fitting cover. Beyond marine winterizing and boat storage, this same shrink wrap is suited to general construction, industrial, and warehouse applications where a vapor barrier, temporary enclosure, or protective wrap is needed. The film resists damage from sunlight, moisture, chemicals, and heat, making it a practical option for anyone needing a dependable, long-lasting protective covering in demanding outdoor conditions. This roll weighs 64.4 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Poly America\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SF0620100B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 100 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 6 Mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyethylene (100% virgin resin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Protection:\u003c\/strong\u003e 6-month UVI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShrink Properties:\u003c\/strong\u003e Two-directional shrink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 64.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 073257000376\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow thick is this Poly America shrink wrap?\u003c\/strong\u003e It is 6 mil thick, made from 100% virgin polyethylene resin for consistent strength and tear resistance across the roll.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size roll does part SF0620100B come in?\u003c\/strong\u003e SF0620100B comes as a single roll measuring 20 feet wide by 100 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this shrink wrap UV resistant?\u003c\/strong\u003e Yes, it includes UV inhibitors rated for 6 months of protection, which helps it hold up to sun exposure over a typical storage season.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this shrink wrap?\u003c\/strong\u003e This roll is blue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SF0620100B roll weigh?\u003c\/strong\u003e The roll weighs 64.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this shrink wrap made from?\u003c\/strong\u003e It is made from 100% virgin polyethylene resin rather than reprocessed material, which supports consistent film strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does two-directional shrink mean for this product?\u003c\/strong\u003e The film is engineered to shrink in two directions, allowing it to pull tight and conform closely around a boat's shape when installed correctly, rather than fitting loosely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this shrink wrap used for besides boat storage?\u003c\/strong\u003e Poly America shrink wrap SF0620100B is also suited to construction, industrial, and warehouse applications needing a vapor barrier, temporary enclosure, or protective wrap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this shrink wrap protect against more than just rain?\u003c\/strong\u003e Yes, the polyethylene film resists damage from sunlight, moisture, chemicals, and heat, in addition to blocking rain, dirt, and debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this shrink wrap form a waterproof barrier?\u003c\/strong\u003e When installed correctly, this 6 mil polyethylene film forms a waterproof barrier that helps protect the covered surface from rain and moisture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs SF0620100B sold as a single roll or multiple pieces?\u003c\/strong\u003e It is supplied as one 20 ft by 100 ft roll of 6 mil blue shrink wrap.\u003c\/p\u003e","brand":"Poly America","offers":[{"title":"Default Title","offer_id":49031102660827,"sku":"P-A-SF0620100B","price":226.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41bQMhtrbhL.jpg?v=1785208841"},{"product_id":"shrink-wrap-international-white-polyethylene-heat-shrink-tape-702w-2-inch-x-180-feet","title":"Shrink Wrap International White Polyethylene Heat Shrink Tape 702W, 2 Inch x 180 Feet","description":"\u003cp\u003eThis white polyethylene heat shrink tape from Shrink Wrap International (part number 702W) is built for sealing and reinforcing seams on boat shrink wrap during the wrapping process. The 2 inch wide roll runs 180 feet, giving installers a long continuous length for taping seams, patching small tears, and securing wrap around masts, poles, and other protrusions without needing frequent roll changes. Made of polyethylene, the tape is waterproof, which matters for a product used outdoors on a shrink-wrapped boat exposed to rain, dew, and spray over a storage or shipping season. The white color matches standard white shrink wrap film so taped seams blend in rather than standing out against the covering. Like the shrink film it is used with, this tape is designed to be heat activated and shrink down tight against the surface it is applied to, helping create a smoother, more secure seal at seams and around fittings. It is sold as a single roll and is a straightforward, functional supply item for anyone shrink wrapping a boat, equipment, or other large items for storage or transport.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shrink Wrap International\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 702W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyethylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 180 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.24 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 000080095348\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow wide and how long is the 702W shrink wrap tape?\u003c\/strong\u003e The 702W tape is 2 inches wide and comes in a 180 foot roll, giving enough length to seal multiple seams on a shrink-wrapped boat without changing rolls partway through.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this tape made of?\u003c\/strong\u003e 702W is made of polyethylene, the same type of material used in the shrink wrap film it is designed to be used alongside.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this tape waterproof?\u003c\/strong\u003e Yes, the 702W polyethylene tape is waterproof, which suits its use on the outside of shrink-wrapped boats and equipment exposed to weather.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 702W tape?\u003c\/strong\u003e It is white, matching standard white boat shrink wrap film so taped seams and patches blend in with the surrounding covering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this tape used for?\u003c\/strong\u003e The 702W polyethylene tape is used to seal seams, secure overlaps, and patch small tears or punctures in shrink wrap during boat and equipment wrapping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 702W shrink when heat is applied?\u003c\/strong\u003e Yes, as a heat shrink tape, 702W is designed to shrink and tighten against the surface when heat is applied, similar to the shrink wrap film it is used with.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many rolls come in a package?\u003c\/strong\u003e 702W is sold as a single roll of tape.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this tape be used on projects other than boat shrink wrapping?\u003c\/strong\u003e The 702W polyethylene heat shrink tape is intended for use with shrink wrap on boats and similar large items being covered for storage or transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length of seam can one roll of 702W cover?\u003c\/strong\u003e One roll of 702W provides 180 feet of 2 inch wide tape, enough for taping multiple seams or repairs on a typical shrink wrap job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 702W tape sold by width and length like other shrink wrap tapes?\u003c\/strong\u003e Yes, 702W is specified as 2 inches wide by 180 feet long, the standard way shrink wrap tape rolls are measured.\u003c\/p\u003e","brand":"Shrink Wrap International","offers":[{"title":"Default Title","offer_id":49031301890267,"sku":"SWS-702W","price":14.57,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31y57R7ONKL.jpg?v=1785212951"},{"product_id":"poly-america-boat-shrink-wrap-white-polyethylene-film-6-7-mil-available-in-24-x-75-to-28-x-64","title":"Poly America Boat Shrink Wrap - White Polyethylene Film, 6-7 Mil, Available in 24' x 75' to 28' x 64'","description":"\u003cp\u003ePoly America Boat Shrink Wrap is a premium-grade, 100% virgin resin polyethylene film engineered for winterizing and storing boats of all sizes. Manufactured in the U.S.A. to meet ASTM and federal LP specifications, this two-directional shrink film draws down tight and glove-like around hulls, superstructures, and cockpits, eliminating the flapping, chafing, and water pooling that come with tarps. Built-in UV inhibitors provide up to 12 months of protection against sun, rain, chemicals, and heat, so your boat stays sealed and dry through an entire off-season. This line is offered in both 6 Mil and 7 Mil thicknesses and multiple roll sizes, giving installers and DIY boat owners the flexibility to match film weight and coverage to the vessel being wrapped.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Poly America\u003c\/li\u003e\n\u003cli\u003eThickness: 6 Mil or 7 Mil\u003c\/li\u003e\n\u003cli\u003eColor: White\u003c\/li\u003e\n\u003cli\u003eMaterial: Premium-grade polyethylene, 100% virgin resin\u003c\/li\u003e\n\u003cli\u003eUV Protection: 12 month UV protection with UV inhibitors\u003c\/li\u003e\n\u003cli\u003eShrink Direction: Two-directional\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in U.S.A.\u003c\/li\u003e\n\u003cli\u003eIndustry Standards: ASTM D1593, ASTM D4397-91, ASTM D882, ASTM D4635-91, ASTM D1709, ASTM D1922, ASTM D2732, ASTM G53\u003c\/li\u003e\n\u003cli\u003eFederal Specifications: LP-378, LP-390, LP-512\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis roll of Poly America Boat Shrink Wrap is available in 6 Mil (24' x 115') and 7 Mil (28' x 64' or 24' x 75') configurations. Choose 6 Mil for smaller boats or lighter-duty seasonal coverage where maximum roll length is helpful, and step up to 7 Mil for larger vessels, longer storage periods, or added puncture and tear resistance. Match the roll dimensions to your boat's length and beam, allowing enough film to wrap fully around the hull with overlap at the seams.\u003c\/p\u003e","brand":"Poly America","offers":[{"title":"6 Mil \/ 24' x 115'","offer_id":49046058893531,"sku":"P-A-SFHM0624115W","price":313.56,"currency_code":"USD","in_stock":true},{"title":"7 Mil \/ 28' x 64'","offer_id":49046058926299,"sku":"P-A-SFHM0728064W","price":237.25,"currency_code":"USD","in_stock":true},{"title":"7 Mil \/ 24' x 75'","offer_id":49046058959067,"sku":"P-A-SFHM0724075W","price":313.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/p-a-sf0620100w_lg__45625.1539802567.1280.1280__98415.1722351637.500.750_225a2acf-b1f8-4cff-b6bc-c025df071b71.jpg?v=1785393344"},{"product_id":"poly-america-shrink-wrap-white-6-7-mil-boat-shrink-film-rolls-available-in-20-x-100-and-26-x-100","title":"Poly America Shrink Wrap - White 6\/7 Mil Boat Shrink Film Rolls, Available in 20' x 100' and 26' x 100'","description":"\u003cp\u003ePoly America Shrink Wrap is a heavy-duty, white polyethylene film built for wrapping boats, PWCs, jet skis, and other equipment for winter storage or transport. Made from 100% virgin resin with UV inhibitors, this film delivers 12 months of protection against sun degradation, moisture, dirt, and pests while your boat sits covered. The white finish reflects heat to reduce interior condensation and keep stored items cooler than clear or darker films. This line is offered in two roll sizes to match different boat lengths and coverage needs, from a 6 mil 20' x 100' roll up to a heavier-duty 7 mil 26' x 100' roll.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Poly America\u003c\/li\u003e\n\u003cli\u003eMaterial: Polyethylene (100% virgin resin)\u003c\/li\u003e\n\u003cli\u003eColor: White\u003c\/li\u003e\n\u003cli\u003eUV Protection: 12 month UV protection\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eIndustry Standards: ASTM D1593, ASTM D4397-91, ASTM D882, ASTM D4635-91, ASTM D1709, ASTM D1922, ASTM D2732, ASTM G53, Federal Specification LP-378, Federal Specification LP-390, Federal Specification LP-512\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eChoose your roll based on the size of the boat or item you are wrapping and how much heat-shrink film you need on hand. The 20' x 100' roll is a 6 mil film offering 2000 square feet of coverage, well suited for smaller to mid-size boats or single-season storage jobs. The 26' x 100' roll steps up to a heavier 7 mil gauge for wider boats or applications needing extra puncture resistance and durability over a longer season. Match the roll width to your boat's beam plus enough overlap for a proper heat-shrunk seal, and select the heavier 7 mil option if you want added toughness against branches, docks, or rough handling.\u003c\/p\u003e","brand":"Poly America","offers":[{"title":"20' x 100', 6 Mil","offer_id":49047409819867,"sku":"P-A-SF0620100W","price":226.98,"currency_code":"USD","in_stock":true},{"title":"26' x 100', 7 Mil","offer_id":49047409852635,"sku":"P-A-SF0726100W","price":304.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/316HXals82L_c159912b-bf5a-4f12-b38b-3f94a89aa3e4.jpg?v=1785423629"},{"product_id":"poly-america-boat-shrink-wrap-rolls-ldpe-heat-shrink-film-14-to-26-widths-6-7-mil","title":"Poly-America Boat Shrink Wrap Rolls - LDPE Heat Shrink Film, 14' to 26' Widths, 6-7 Mil","description":"\u003cp\u003ePoly-America boat shrink wrap rolls are heavy-duty, low density polyethylene (LDPE) film engineered to protect boats, jet skis, and PWCs during winter storage and transport. Made from 100% virgin resin with UV inhibitors and additives built in during manufacturing, this film shrinks tight around the hull to form a glove-like, weatherproof cover that resists wind, rain, snow, and sun without shifting or chafing the gelcoat the way a tarp can. Each roll is available across a range of widths, lengths, and thicknesses so you can match the film to the size of the boat and the length of the storage season.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Poly-America\u003c\/li\u003e\n\u003cli\u003eMaterial: Low Density Polyethylene (LDPE), 100% virgin resin\u003c\/li\u003e\n\u003cli\u003eThickness range: 6 Mil to 7 Mil\u003c\/li\u003e\n\u003cli\u003eWidths: 14' to 26'\u003c\/li\u003e\n\u003cli\u003eLengths: 100' to 150'\u003c\/li\u003e\n\u003cli\u003eColors: White (semi-transparent) and Blue\u003c\/li\u003e\n\u003cli\u003eUV protection: 12 months\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eIndustry Specifications: ASTM D1593, ASTM D4397-91, ASTM D882, ASTM D4635-91, ASTM D1709, ASTM D1922, ASTM D2732, ASTM G53, Federal Specification LP-378, LP-390, LP-512\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eChoose your roll based on the widest point of your boat plus enough length to fully wrap bow to stern with overlap. The 14' x 150' 6 Mil White roll suits smaller to mid-size boats and standard-duty winterizing. The 26' x 100' 7 Mil Blue roll is a wider, thicker-gauge film for larger boats or applications needing extra puncture resistance and a heavier-duty shrink. White film offers some visibility of the hull beneath the wrap, while blue film is a fully opaque option favored by many marinas and shrink-wrap contractors.\u003c\/p\u003e","brand":"Poly America","offers":[{"title":"14' x 150' \/ 6 Mil \/ White","offer_id":49047412736219,"sku":"P-A-SF0614150W","price":238.44,"currency_code":"USD","in_stock":true},{"title":"26' x 100' \/ 7 Mil \/ Blue","offer_id":49047412768987,"sku":"P-A-SF0726100B","price":344.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31UWkk2MXmL_1b49871a-e995-4715-a6e9-3803ae06fe85.jpg?v=1785423683"},{"product_id":"poly-america-shrink-wrap-film-6-mil-blue-boat-shrink-wrap-available-in-14-x-150-to-17-x-120","title":"Poly-America Shrink Wrap Film, 6 Mil Blue Boat Shrink Wrap - Available in 14' x 150' to 17' x 120'","description":"\u003cp\u003ePoly-America Shrink Wrap Film is a heavy-duty 6 Mil polyethylene film engineered for boat, jet ski, PWC, and general watercraft winter storage and shipping wrap applications. Manufactured from 100% virgin resin polyethylene, this film is formulated with UV inhibitors and additives that deliver 12 months of UV protection, keeping your covered vessel shielded from sun degradation, moisture, dirt, and debris throughout the storage season. The film shrinks tightly in two directions when heat is applied, forming a taut, drum-tight skin that sheds water and resists wind without flapping, tearing, or ballooning. Made in the USA to meet ASTM and Federal shrink film specifications, this Poly-America film is trusted by marinas, boatyards, and DIY boat owners for dependable, moderate-climate shrink wrapping where heavy snow loads are not a routine concern.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Poly-America\u003c\/li\u003e\n\u003cli\u003eThickness: 6 Mil polyethylene\u003c\/li\u003e\n\u003cli\u003eColor: Blue\u003c\/li\u003e\n\u003cli\u003eMaterial: 100% virgin resin polyethylene with UV inhibitors\u003c\/li\u003e\n\u003cli\u003eUV Protection: 12 months\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA\u003c\/li\u003e\n\u003cli\u003eMeets ASTM D1593, D4397-91, D882, D4635-91, D1709, D1922, D2732, G53; Federal Spec LP-378, LP-390, LP-512\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis Poly-America shrink wrap line is available in two roll sizes to match different boat lengths and beam widths. The 14' x 150' roll (2100 sq ft) suits narrower coverage runs needing extra length, while the 17' x 120' roll (2040 sq ft) offers a wider film for beamier boats needing fewer side seams. Measure your boat's overall length and beam, then add clearance for the bow, stern, and any tenting or framing before choosing a roll so you have enough film to fully enclose the vessel with adequate overlap at seams.\u003c\/p\u003e","brand":"Poly America","offers":[{"title":"17' x 120'","offer_id":49047415259355,"sku":"P-A-SF0617120B","price":231.73,"currency_code":"USD","in_stock":true},{"title":"14' x 150'","offer_id":49047415292123,"sku":"P-A-SF0614150B","price":238.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31OcDSarOmL_7f3c5f44-09ea-420a-b7bf-297480fae41b.jpg?v=1785423728"},{"product_id":"shrink-wrap-international-white-shrink-wrap-tape-available-in-4-x-180-and-6-x-180","title":"Shrink Wrap International White Shrink Wrap Tape - Available in 4\" x 180' and 6\" x 180'","description":"\u003cp\u003eShrink Wrap International Shrink Wrap Tape is a heavy-duty polyethylene tape built to patch, seam, and secure boat shrink wrap film during winterization and storage. Made from the same waterproof polyethylene used in standard shrink wrap film, it bonds cleanly to wrapped surfaces to close seams, cover cable and strap penetrations, and reinforce high-wear areas like rub rails, corners, and mast openings. The white finish blends seamlessly with standard white shrink wrap installations, giving a clean, professional finish that holds up outdoors through wind, rain, and UV exposure.\u003c\/p\u003e\u003cp\u003eEach roll is a single continuous 180 foot length, so installers can work across long seams or multiple patch points without stopping to change rolls mid-job. The tape is compatible with metal hardware, making it suitable for sealing around masts, stanchions, rails, and other fittings that pass through the wrap.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Shrink Wrap International\u003c\/li\u003e\n\u003cli\u003eMaterial: Polyethylene\u003c\/li\u003e\n\u003cli\u003eColor: White\u003c\/li\u003e\n\u003cli\u003eLength: 180 feet per roll\u003c\/li\u003e\n\u003cli\u003eWater Resistance Level: Waterproof\u003c\/li\u003e\n\u003cli\u003eCompatible Material: Metal\u003c\/li\u003e\n\u003cli\u003eUnit Count: 1 roll\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis tape is available in two widths to match the scale of the job. The 4 inch x 180 foot roll (SWS-704W) is well suited for general seam sealing, patch repairs, and smaller penetrations. The 6 inch x 180 foot roll (SWS-706W) offers wider coverage per pass, making it a faster option for long seams, larger patches, or reinforcing high-stress areas that need extra width. Choose the width based on how much coverage you need per strip and how much overlap you want at seams and patches.\u003c\/p\u003e","brand":"Shrink Wrap International","offers":[{"title":"4\" x 180'","offer_id":49047420698843,"sku":"SWS-704W","price":29.16,"currency_code":"USD","in_stock":true},{"title":"6\" x 180'","offer_id":49047420731611,"sku":"SWS-706W","price":41.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31y57R7ONKL_80ae8719-ae17-48d3-b837-73e1f6953c5b.jpg?v=1785423946"},{"product_id":"taylor-made-products-back-to-back-lounge-seat-cover-18-x-20-x-40-inches-white-or-blue","title":"Taylor Made Products Back to Back Lounge Seat Cover, 18 x 20 x 40 Inches - White or Blue","description":"\u003cp\u003eThe Taylor Made Products Back to Back Lounge Seat Cover is a purpose-built cover for back to back lounge seating, protecting vinyl and cushions from sun, rain, and mildew when the boat is not in use. It is cut to the 18 x 20 x 40 inch profile common to back to back lounge seats and features a heavy-duty vinyl shell with a soft terry cloth backing that will not scratch gelcoat or scuff finished surfaces. A polyurethane coating adds an extra layer of water resistance, while built-in air vents let trapped moisture and heat escape so mildew and odor do not build up underneath. A drawstring hem cinches the cover snugly around the base of the seat for a secure, wind-resistant fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Taylor Made Products\u003c\/li\u003e\n\u003cli\u003eProduct Style: Back to Back Lounge Seat Cover\u003c\/li\u003e\n\u003cli\u003eMaterial: Vinyl with terry cloth backing and polyurethane coating\u003c\/li\u003e\n\u003cli\u003eDimensions: 18 in H x 20 in W x 40 in D\u003c\/li\u003e\n\u003cli\u003eWeight: 1 pound\u003c\/li\u003e\n\u003cli\u003eWater Resistance: Waterproof\u003c\/li\u003e\n\u003cli\u003eUV Protection: Yes\u003c\/li\u003e\n\u003cli\u003eMildew Resistance: Mildew and water resistant\u003c\/li\u003e\n\u003cli\u003eVentilation: Air vents\u003c\/li\u003e\n\u003cli\u003eClosure: Drawstring hem\u003c\/li\u003e\n\u003cli\u003eFit Type: Universal fit for back to back lounge seats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis lounge seat cover is offered in White (part 11994) and Blue (part 11997). Both share the same 18 x 20 x 40 inch fit for back to back lounge seating, so choose the color that best matches your boat's gelcoat, upholstery, or bimini top rather than worrying about sizing differences.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"White","offer_id":49048187371739,"sku":"NAT-11994","price":46.34,"currency_code":"USD","in_stock":false},{"title":"Blue","offer_id":49048187404507,"sku":"NAT-11997","price":46.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71cb93SmmML_59a13330-b3bc-41d4-a2b4-54a81582c98d.jpg?v=1785434757"},{"product_id":"taylor-made-products-center-console-cover-white-vinyl-medium-to-large","title":"Taylor Made Products Center Console Cover, White Vinyl - Medium to Large","description":"\u003cp\u003eProtect your boat's center console from sun, rain, mildew, and general wear when it's not in use. This Taylor Made Products console cover is built from heavy-duty white vinyl with reinforcement patches sewn in at high-stress points, giving it the durability to stand up to season after season of outdoor storage. A universal fit design lets it work across a range of console shapes, and the water- and mildew-resistant material keeps moisture from settling in and damaging the console underneath.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Taylor Made Products\u003c\/li\u003e\n\u003cli\u003eMaterial: White vinyl\u003c\/li\u003e\n\u003cli\u003eConstruction: Heavy-duty construction with reinforcement patches sewn in\u003c\/li\u003e\n\u003cli\u003eWater\/Mildew Resistance: Mildew and water resistant\u003c\/li\u003e\n\u003cli\u003eFit Type: Universal fit\u003c\/li\u003e\n\u003cli\u003eWarranty: 5-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis console cover is available in two sizes to match your console's dimensions. The Medium size (40410) fits consoles measuring approximately 44 inches high by 40 inches wide by 30 inches deep, while the Large size (40420) fits consoles measuring approximately 45 inches high by 46 inches wide by 40 inches deep. Measure your console's height, width, and depth before ordering, and choose the size closest to your measurements for the best fit.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Large (45\" H x 46\" W x 40\" D)","offer_id":49048195956955,"sku":"NAT-40420","price":56.39,"currency_code":"USD","in_stock":true},{"title":"Medium (44\" H x 40\" W x 30\" D)","offer_id":49048195989723,"sku":"NAT-40410","price":50.48,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5173Fl4Ha-L_73ab6cfa-02b6-4a63-b280-c1e61b8495c5.jpg?v=1785434799"},{"product_id":"taylor-made-products-swingback-boat-seat-cover-white-vinyl-available-in-small-and-large","title":"Taylor Made Products Swingback Boat Seat Cover, White Vinyl - Available in Small and Large","description":"\u003cp\u003eKeep swingback boat seats protected from sun, rain, and mildew with the Taylor Made Products Swingback Boat Seat Cover. Made from durable 6.25 oz.\/sq. yd. marine vinyl in classic white, this cover shields your upholstery from UV fading and cracking while repelling water to keep seats dry between trips. Built-in air vents let trapped heat and moisture escape, reducing the risk of mildew forming underneath, and a drawstring hem cinches the cover snugly around the base of the seat so it stays put in wind and wake. Whether your boat is docked, trailered, or stored for the season, this cover is a simple, affordable way to extend the life of your seating.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Taylor Made Products\u003c\/li\u003e\n\u003cli\u003eMaterial: 6.25 oz.\/sq. Yd. marine vinyl\u003c\/li\u003e\n\u003cli\u003eColor: White\u003c\/li\u003e\n\u003cli\u003eClosure: Drawstring hem\u003c\/li\u003e\n\u003cli\u003eFeatures: Air vents, heavy duty construction, mildew and water repellent, UV protection, waterproof\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis cover is available in two sizes to match your swingback seat. Choose the Small Swingback cover for seats measuring approximately 36 in H x 36 in W x 20 in D. Choose the Large Swingback cover for bigger swingback seats that need extra coverage. Measure your seat's height, width, and depth before ordering to confirm the best fit.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Small","offer_id":49048526061787,"sku":"NAT-40240","price":37.95,"currency_code":"USD","in_stock":true},{"title":"Large","offer_id":49048526094555,"sku":"NAT-40245","price":38.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/nat-40240_lg__63280.1558140922.500.750_1a4992de-5b5a-423b-b32b-552b7fbe720b.jpg?v=1785437573"},{"product_id":"shrink-wrap-international-strapping-buckles-1-2-and-3-4-boat-shrink-wrap-buckles-100-pack","title":"Shrink Wrap International Strapping Buckles - 1\/2\" and 3\/4\" Boat Shrink Wrap Buckles, 100-Pack","description":"\u003cp\u003eShrink Wrap International strapping buckles are the locking hardware that holds woven polyester strapping tight around a boat during the shrink wrap process. Used together with a strap tensioning tool, each galvanized steel buckle grips the strapping cord and locks it in place, forming a secure perimeter band that anchors the edge of the film and keeps it from shifting, chafing, or working loose during storage or transport. Sold in bulk bags of 100, these buckles are sized to match specific strapping widths, so choosing the correct size for your strapping is essential to getting a tight, dependable hold.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Shrink Wrap International\u003c\/li\u003e\n\u003cli\u003eMaterial: Galvanized steel\u003c\/li\u003e\n\u003cli\u003ePack size: 100 buckles per bag\u003c\/li\u003e\n\u003cli\u003eCompatible strapping: Woven polyester (cord) strapping\u003c\/li\u003e\n\u003cli\u003eIntended use: Boat shrink wrap perimeter strapping, used with a strap tensioning tool\u003c\/li\u003e\n\u003cli\u003eAvailable sizes: 1\/2 Inch and 3\/4 Inch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThese buckles are sold by the strapping width they are built to fit. Match the buckle size exactly to the strapping cord you are using: the 1\/2 Inch buckle (part 050) is sized for 1\/2 inch strapping, and the 3\/4 Inch buckle (part 075) is sized for 3\/4 inch strapping. Buckles are not interchangeable between widths, so check your existing strapping or your shrink wrap kit before ordering. Each option ships as a 100-count bag, sized appropriately for jobs ranging from single boats to fleet-scale wrapping.\u003c\/p\u003e","brand":"Shrink Wrap International","offers":[{"title":"1\/2\" (100-Pack)","offer_id":49049153372379,"sku":"SWS-050","price":25.73,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (100-Pack)","offer_id":49049153405147,"sku":"SWS-075","price":34.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sws-050_lg__21605.1558140949.500.750_f9d624a2-e3c7-4dfb-9067-f5ed9f28e068.jpg?v=1785452147"},{"product_id":"shrink-wrap-international-polyester-boat-shrink-wrap-strapping-available-in-1-2-x-1500-to-3-4-x-2100","title":"Shrink Wrap International Polyester Boat Shrink Wrap Strapping - Available in 1\/2\" x 1500' to 3\/4\" x 2100'","description":"\u003cp\u003eShrink Wrap International Boat Shrink Wrap Strapping is the perimeter banding system that keeps off-season boat shrink wrap film tight, secure, and chafe-free through winter storage. Woven from durable polyester with a cross-woven cord construction, this strapping resists stretching and abrasion as it cinches around hulls, cradles, and support structures. Run it around the boat and anchor it to wooden supports, handrails, pipes, girders, or similar fixed points, then draw it tight with a tensioning tool and self-locking buckle to form a continuous tensioned band that holds the shrink film firmly in place against wind, rain, and snow load. The striped pattern makes the strapping easy to spot and inspect at a glance during installation and seasonal checks. Available in two roll sizes to match jobs of any scale, from single-boat wrapping to full marina and storage-yard operations.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Shrink Wrap International\u003c\/li\u003e\n\u003cli\u003eMaterial: Polyester\u003c\/li\u003e\n\u003cli\u003eCord Construction: Cross-Woven Cord\u003c\/li\u003e\n\u003cli\u003ePattern: Striped\u003c\/li\u003e\n\u003cli\u003eSizes: 1\/2\" x 1500' and 3\/4\" x 2100'\u003c\/li\u003e\n\u003cli\u003eUse: Perimeter banding for boat shrink wrap film\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eChoose the 1\/2\" x 1500' roll (750 lb break strength) for standard boat wrapping jobs where a lighter, easier-to-handle strap is preferred. Choose the 3\/4\" x 2100' roll for larger boats, longer perimeters, or higher-volume shops that want fewer roll changes and added holding strength per run. Both sizes use the same tensioning tool and buckle technique, so you can standardize your installation process across roll sizes.\u003c\/p\u003e","brand":"Shrink Wrap International","offers":[{"title":"1\/2\" x 1500'","offer_id":49049153568987,"sku":"SWS-500","price":61.28,"currency_code":"USD","in_stock":true},{"title":"3\/4\" x 2100'","offer_id":49049153601755,"sku":"SWS-750","price":115.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SWS-500_lg__70278.1558135105.500.750_fc00e7ae-9570-46d4-9ce6-9ed0f3c69697.jpg?v=1785452211"},{"product_id":"shrink-wrap-international-blue-shrink-wrap-tape-2-to-6-x-180-seam-repair-tape","title":"Shrink Wrap International Blue Shrink Wrap Tape - 2\" to 6\" x 180' Seam \u0026 Repair Tape","description":"\u003cp\u003eShrink Wrap International Blue Shrink Wrap Tape is the professional standard for sealing seams, patching tears, and reinforcing cut zipper and access door openings during boat shrink wrapping season. Formulated to bond aggressively to polyethylene shrink film, this tape holds up under the heat of a shrink gun and stays put through storage, transport, and off-season exposure. Each roll runs 180 feet long, giving installers a full season's worth of material without constantly swapping rolls, and the line is available in 2 inch, 4 inch, and 6 inch widths to match everything from small seam repairs to wide panel overlaps and full-width reinforcement runs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Shrink Wrap International\u003c\/li\u003e\n\u003cli\u003eColor: Blue\u003c\/li\u003e\n\u003cli\u003eRoll Length: 180 feet (all widths)\u003c\/li\u003e\n\u003cli\u003eBacking Thickness: 9 mil\u003c\/li\u003e\n\u003cli\u003eUV Inhibitors: None (intended for seam\/patch use, not long-term direct UV exposure)\u003c\/li\u003e\n\u003cli\u003eEdge Style: Pinked edge available on the 2 inch width\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eChoose the 2 inch width (SWS-702B) for standard seam sealing and small patch repairs where its pinked edge helps the tape lay flat and resist peeling at the borders. Step up to the 4 inch width (SWS-704B, replaces DS-704BP) for wider seam overlaps, larger patches, and heavier-duty access door reinforcement. Select the 6 inch width (SWS-706B) for maximum coverage in a single pass, such as reinforcing large cut-outs or bridging wide gaps between panels. All three widths share the same 180 foot length, 9 mil backing, and blue color, so the width you pick is driven entirely by the size and location of the repair or seam you're taping.\u003c\/p\u003e","brand":"Shrink Wrap International","offers":[{"title":"2\" x 180', Pinked Edge","offer_id":49049153994971,"sku":"SWS-702B","price":14.57,"currency_code":"USD","in_stock":true},{"title":"4\" x 180'","offer_id":49049154027739,"sku":"SWS-704B","price":29.16,"currency_code":"USD","in_stock":true},{"title":"6\" x 180'","offer_id":49049154060507,"sku":"SWS-706B","price":38.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71He-xW5ADL_1ae488d0-39c7-4755-9e79-e27e0f40c247.jpg?v=1785452258"},{"product_id":"shrink-wrap-international-zipper-door-for-boat-shrink-wrap-available-in-36-and-48","title":"Shrink Wrap International Zipper Door for Boat Shrink Wrap - Available in 36\" and 48\"","description":"\u003cp\u003eThe Shrink Wrap International Zipper Door gives you a resealable access point in your boat's shrink wrap enclosure, so you can walk in and out to check lines, run dehumidifiers, load gear, or perform winter maintenance without slicing open the film. Each door bonds directly onto the shrink wrap during installation, then zips open and closed as many times as you need through the storage season and reseals to keep moisture, pests, and weather out. The line covers a 36 inch opening for tighter access points and a 48 inch opening for wider walk-through doorways, including an 800B version sized as a direct replacement for the Dr Shrink DS-3648B door.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Shrink Wrap International\u003c\/li\u003e\n\u003cli\u003eProduct Category: Boat Shrink Wrap Zipper Door\u003c\/li\u003e\n\u003cli\u003eDoor Widths: 36 inch and 48 inch\u003c\/li\u003e\n\u003cli\u003eColor: White\u003c\/li\u003e\n\u003cli\u003eCompatibility: Standard boat shrink wrap film systems\u003c\/li\u003e\n\u003cli\u003eCross-Reference: 800B replaces Dr Shrink DS-3648B\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003ePick the door width that matches how you and your crew move through the enclosure. The 36 inch door (775W) suits a single-person walk-through or a tighter access point on smaller boats. The 48 inch doors (800W and 800B) open wide enough to carry gear, coolers, or equipment in and out comfortably, and are the better choice for larger enclosures or frequent in-season access. If you are replacing an existing Dr Shrink DS-3648B zipper door, choose the 800B to match that footprint exactly; otherwise the standard 800W covers the same 48 inch opening for new installations.\u003c\/p\u003e","brand":"Shrink Wrap International","offers":[{"title":"36\" \/ 775W","offer_id":49049154814171,"sku":"SWS-775W","price":31.31,"currency_code":"USD","in_stock":true},{"title":"48\" \/ 800W","offer_id":49049154846939,"sku":"SWS-800W","price":34.75,"currency_code":"USD","in_stock":true},{"title":"48\" \/ 800B (Dr Shrink DS-3648B Replacement)","offer_id":49049154879707,"sku":"SWS-800","price":38.18,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_08717189-3289-4cd7-b414-1f39de6f0678.jpg?v=1785452325"},{"product_id":"vico-plastics-cam-lock-cover-support-poles-available-in-47-to-70","title":"Vico Plastics Cam-Lock Cover Support Poles - Available in 47\" to 70\"","description":"\u003cp\u003eKeep boat covers, biminis, and canvas tops taut and shedding water with the Vico Plastics Cam-Lock Cover Support Pole line. Each pole uses a simple, tool-free cam-lock lever to extend, retract, and clamp the pole securely at the exact height needed, propping up cover fabric so rain and debris run off instead of pooling and causing sag, mildew, or stress on seams. Lightweight molded construction makes these poles easy to store, transport, and position by hand, and the cam-lock design holds firm under wind and vibration without tools or hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Vico Plastics\u003c\/li\u003e\n\u003cli\u003eLocking Mechanism: Cam-lock lever, tool-free\u003c\/li\u003e\n\u003cli\u003eLength range: 47 inches to 70 inches\u003c\/li\u003e\n\u003cli\u003eWeight range: approximately 1.5 to 2.5 pounds depending on length\u003c\/li\u003e\n\u003cli\u003eUse: Support pole for boat covers, biminis, and canvas tops\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis line is offered in three lengths so you can match the pole to your cover height and boat size. The 47 inch pole (X47A-PLUG) suits smaller boats or lower cover peaks, the 59 inch pole suits mid-size covers, and the 70 inch pole (X70A-PLUG) is built for taller cover systems or larger boats. Measure the peak height needed under your cover, from deck or gunwale to the highest point of the fabric, and choose the pole length that lets the cam-lock lever reach that height with room to adjust and lock securely.\u003c\/p\u003e","brand":"Vico Plastics","offers":[{"title":"47\"","offer_id":49049220219099,"sku":"V-P-X47A-PLUG","price":14.42,"currency_code":"USD","in_stock":false},{"title":"59\"","offer_id":49049220251867,"sku":"V-P-X59A-PLUG","price":43.26,"currency_code":"USD","in_stock":false},{"title":"70\"","offer_id":49049220284635,"sku":"V-P-X70A-PLUG","price":44.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_be7918ec-43b8-4f09-8969-7a7bd93db7d1.jpg?v=1785456084"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/BoatVentIII__32478.1722507295.500.750.jpg?v=1785356913","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-canvas-tops-covers-boat-covers-shrink-wrap.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}