{"title":"Canvas, Tops \u0026 Covers","description":null,"products":[{"product_id":"seadog-fast-eye-boat-snap-2-sand-cast-brass-3-3-16-in-polished-marine-rigging-snap-mpn-139122-1","title":"Sea-Dog Fast Eye Boat Snap #2, 3-3\/16 Inch Sand Cast Brass, Spring-Loaded Latch","description":"\u003cp\u003eThe Sea-Dog Fast Eye Boat Snap #2 (139122-1) is a sand cast brass rigging snap designed for medium duty attachment tasks aboard a boat. It uses a spring-loaded fast eye latch, meaning the eye is fixed rather than swiveling, so the snap opens and closes quickly on a fixed loop for reliable, repeatable attachment. This size 2 snap measures 3-3\/16 inches overall (dimension A), with a 1\/2 inch eye opening (dimension B) and a 3\/4 inch gate opening (dimension C), and it weighs 0.194 pounds.\u003c\/p\u003e\u003cp\u003eIt is well suited to tethers, paddle leashes, and other light-to-medium duty connection points where a dependable spring latch is needed but full swivel action is not required. The body is sand cast brass with a polished finish, giving it both a functional spring closure and a decorative, finished appearance for visible hardware on deck or gear. Sea-Dog also produces a Swivel Eye version of this boat snap in comparable sizes for applications where a rotating eye is preferred to reduce line twist; the 139122-1 is the fixed fast eye design.\u003c\/p\u003e\u003cp\u003eThis snap is sold as an individual unit; Sea-Dog packs this part number in cases of 10.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 139122-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fast Eye Boat Snap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e #2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Sand Cast Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch Type:\u003c\/strong\u003e Spring-loaded, fixed (non-swiveling) fast eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 3-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye Opening (B):\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGate Opening (C):\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.194 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions (packaged):\u003c\/strong\u003e 1.5 x 3.88 x 5.81 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514139175\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal marine rigging hardware; not vehicle or engine specific.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers apply to this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 139122-1 boat snap?\u003c\/strong\u003e The 139122-1 is Sea-Dog's Fast Eye Boat Snap in size #2, measuring 3-3\/16 inches overall with a 1\/2 inch eye opening and a 3\/4 inch gate opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this boat snap made of?\u003c\/strong\u003e Sand cast brass with a polished finish is used for the Sea-Dog Fast Eye Boat Snap #2, giving it a functional spring latch along with a decorative, finished look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the eye on this snap swivel?\u003c\/strong\u003e No, the 139122-1 has a fixed fast eye rather than a swivel eye. Sea-Dog offers a separate Swivel Eye Boat Snap line for applications where a rotating eye is preferred to reduce line twist.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this boat snap typically used for?\u003c\/strong\u003e This spring-loaded fast eye snap is designed for medium duty rigging tasks, such as tethers and paddle leashes, and other light connection points aboard a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog Fast Eye Boat Snap #2 weigh?\u003c\/strong\u003e It weighs 0.194 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of part number 139122-1?\u003c\/strong\u003e The packaged product measures 1.5 x 3.88 x 5.81 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 139122-1 snap rated for heavy-duty or anchor line use?\u003c\/strong\u003e It is designed for medium duty rigging applications, not heavy-duty anchor or towing use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the gate opened and closed on this snap?\u003c\/strong\u003e A spring-loaded latch operates the gate on the Sea-Dog Fast Eye Boat Snap #2, allowing for quick one-handed attachment and release.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this genuine Sea-Dog hardware?\u003c\/strong\u003e Yes, part number 139122-1 is a genuine Sea-Dog Fast Eye Boat Snap, identified by UPC 035514139175.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this snap packaged for sale?\u003c\/strong\u003e The 139122-1 is manufactured with a standard case pack of 10 units, though it is sold here as an individual snap.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988545614043,"sku":"S-D-139122-1","price":6.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7636_57b93006-d439-41ba-af4b-e35e6f21e3a7.jpg?v=1784422059"},{"product_id":"sea-dog-fast-eye-boat-snap-3-solid-sand-cast-brass-3-13-16-in-spring-latch-mpn-139123-1","title":"Sea-Dog Fast Eye Boat Snap #3, 3-13\/16 Inch Sand Cast Brass Spring-Loaded Rigging Snap","description":"\u003cp\u003eThe Sea-Dog Fast Eye Boat Snap #3 (part number 139123-1) is a spring-loaded rigging snap built for medium duty marine use. It is constructed of sand cast brass with a polished finish, giving it a functional, corrosion-resistant build that also looks decorative on deck hardware, rigging, or gear attachment points. The spring-loaded latch opens easily for one-handed attachment and closes securely to hold its grip under everyday rigging loads.\u003c\/p\u003e\u003cp\u003eThis #3 size snap measures 3-13\/16 inches overall, with a 9\/16 inch and 3\/4 inch dimension at the eye and opening. It is commonly used for tethers, paddle leashes, and other light-to-medium duty rigging tasks where a dependable, quick-attach brass snap is needed. The fast eye design (a fixed, non-swiveling eye) makes it a straightforward choice anywhere a swivel action is not required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 139123-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fast Eye Boat Snap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Number:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 3-13\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Sand Cast Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.324 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514139045\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 139123-1 Fast Eye Boat Snap used for?\u003c\/strong\u003e It is a spring-loaded brass rigging snap designed for medium duty attachment tasks such as tethers, paddle leashes, and other light rigging uses aboard a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the #3 Fast Eye Boat Snap?\u003c\/strong\u003e This is the size 3 snap in the Sea-Dog Fast Eye lineup, measuring 3-13\/16 inches overall with a 9\/16 inch and 3\/4 inch dimension at the eye and opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is part number 139123-1 made from?\u003c\/strong\u003e The 139123-1 snap is made of sand cast brass with a polished finish, giving it both corrosion resistance and a decorative appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this boat snap weigh?\u003c\/strong\u003e The Sea-Dog 139123-1 Fast Eye Boat Snap weighs 0.324 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Fast Eye snap swivel?\u003c\/strong\u003e No, the Fast Eye design has a fixed eye rather than a swiveling one; buyers who need a swivel action should look for Sea-Dog's Swivel Eye Boat Snap line instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the latch on this snap work?\u003c\/strong\u003e The 139123-1 uses a spring-loaded latch that opens with light pressure for quick one-handed attachment and closes securely to hold the connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this snap suitable for heavy duty rigging?\u003c\/strong\u003e It is designed for medium duty rigging applications such as tethers and paddle leashes, not for heavy load-bearing rigging tasks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 139123-1 boat snap?\u003c\/strong\u003e The UPC for this Fast Eye Boat Snap is 035514139045.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many units come in a standard pack?\u003c\/strong\u003e The Sea-Dog Fast Eye Boat Snap #3 (139123-1) has a standard pack quantity of 10 each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this brass snap corrode in saltwater use?\u003c\/strong\u003e The 139123-1 is constructed of sand cast brass with a polished finish, a material choice suited to marine environments and resistant to the corrosion that affects untreated steel hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this and the #2 or #1 size Fast Eye snap?\u003c\/strong\u003e The #3 size (139123-1) is the largest Fast Eye snap in the series at 3-13\/16 inches overall; smaller sizes in the same line measure 2-7\/8 inches and 2-1\/8 inches.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988546728155,"sku":"S-D-139123-1","price":9.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7636_6acd8a0d-37ac-449c-b456-1f9c1912baf7.jpg?v=1784422068"},{"product_id":"sea-dog-139896-1-bimini-webbing-spring-snap-316-stainless-steel-2-3-16-for-1-webbing-tie-downs","title":"Sea-Dog Bimini Webbing Spring Snap 139896-1, 316 Stainless Steel, Fits 1 Inch Webbing","description":"\u003cp\u003eThe Sea-Dog Bimini Webbing Spring Snap (139896-1) is a compact spring-loaded snap hook designed for securing bimini top webbing, tie-downs, and other light-duty rigging applications aboard a boat. It is built from investment cast 316 stainless steel, a marine-grade alloy chosen for its resistance to corrosion and pitting in saltwater environments, making it suitable for long-term exposure on deck hardware and canvas fittings.\u003c\/p\u003e\u003cp\u003eThis spring snap is sized for use with 1 inch webbing, the standard width used on most bimini top straps and light tie-down webbing. The spring gate opens under thumb pressure and snaps closed automatically, allowing quick one-handed attachment and release of webbing straps, canvas covers, fender lines, or other light rigging where a secure but easily releasable connection is needed. Its investment cast construction gives it a smooth, finished profile that resists snagging on canvas and clothing compared to stamped alternatives.\u003c\/p\u003e\u003cp\u003eSea-Dog packages this snap as an individual replacement part, making it easy to replace a worn or lost snap on an existing bimini top, canvas enclosure, or tie-down strap without purchasing a complete new assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 139896-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bimini Webbing Spring Snap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Webbing Width:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2-3\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.054 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaged Dimensions:\u003c\/strong\u003e 5.81 x 3.85 x 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514139038\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 139896-1 spring snap used for?\u003c\/strong\u003e The Sea-Dog 139896-1 is a Bimini Webbing Spring Snap used for tie-downs and light-duty rigging applications, such as securing bimini top straps or canvas webbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat webbing width does this spring snap fit?\u003c\/strong\u003e It is sized for use with 1 inch webbing, which is the standard width for most bimini top and tie-down straps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 139896-1 spring snap made from?\u003c\/strong\u003e It is made of investment cast 316 stainless steel, a corrosion-resistant marine-grade alloy suited to saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog Bimini Webbing Spring Snap weigh?\u003c\/strong\u003e The Sea-Dog 139896-1 weighs 0.054 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this spring snap?\u003c\/strong\u003e The 139896-1 measures 2-3\/16 inch (dimension A), 1\/4 inch (dimension B), 1-1\/8 inch (dimension C), and 5\/16 inch (dimension D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this snap suitable for heavy rigging or load-bearing use?\u003c\/strong\u003e No, the 139896-1 is intended for light-duty rigging and tie-down applications such as bimini top webbing, not heavy load-bearing rigging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this spring snap rust or corrode over time?\u003c\/strong\u003e It is built from 316 stainless steel, which is highly resistant to corrosion and pitting, making it suitable for ongoing marine and saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the spring snap open and close?\u003c\/strong\u003e The 139896-1 has a spring-loaded gate that opens under thumb pressure for quick attachment to webbing and snaps shut automatically to secure the connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an individual replacement part?\u003c\/strong\u003e Yes, the Sea-Dog 139896-1 is sold as an individual snap, making it suitable for replacing a single worn or missing snap on an existing bimini top or webbing strap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 139896-1 spring snap?\u003c\/strong\u003e The UPC for this Sea-Dog Bimini Webbing Spring Snap is 035514139038.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this snap be used for fender lines or canvas covers?\u003c\/strong\u003e Yes, in addition to bimini webbing, the 139896-1 is suitable for other light-duty applications such as fender lines and canvas cover tie-downs.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988546859227,"sku":"S-D-139896-1","price":3.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7639.jpg?v=1784422093"},{"product_id":"sea-dog-270160-1-jaw-slide-with-bolt-7-8-tube-316-stainless-steel-bimini-top-slide-fitting","title":"Sea-Dog Jaw Slide with Bolt, 7\/8 Inch Tube, 316 Stainless Steel Bimini Fitting, Part 270160-1","description":"\u003cp\u003eThe Sea-Dog 270160-1 Jaw Slide with Bolt is an investment cast 316 stainless steel fitting used to attach an eye end securely to Bimini top support tubing. It is designed for boat owners installing a new Bimini top, adding extra support arms to an existing frame, or customizing a cockpit or sun deck awning. The jaw slide fits over tubing with a 7\/8 inch outer diameter and uses a 1\/4 inch pin. A set screw on the back of the fitting lets you quickly and easily reposition the slide along the tube wherever it is needed, making it simple to fine-tune the geometry of a Bimini frame without removing the tube. This non-hinged style slides directly onto the tube, unlike Sea-Dog's hinged jaw slide, which is intended for mounting on handrails or in spots where sliding a fitting onto the tube is not possible or convenient. Built from investment cast 316 stainless steel, the fitting resists corrosion in the marine environment and stands up to sun and saltwater exposure over years of use. The fitting includes a bolt as part of the Jaw Slide with Bolt design. A matching set screw is available separately under part number 299999-1 for buyers who need replacements.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 270160-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Jaw Slide with Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Outer Diameter:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin\/Screw Part Number:\u003c\/strong\u003e 0P27001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Wall Thickness:\u003c\/strong\u003e 0.049 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.23 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514270076\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size tubing does the Sea-Dog 270160-1 Jaw Slide fit?\u003c\/strong\u003e It fits tubing with a 7\/8 inch outer diameter, making it suitable for standard Bimini top support tubes of that size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog Jaw Slide with Bolt made of?\u003c\/strong\u003e It is made of investment cast 316 stainless steel, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat pin size does part 270160-1 use?\u003c\/strong\u003e This jaw slide uses a 1\/4 inch pin, which secures the eye end connection to the fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 270160-1 jaw slide come with a bolt?\u003c\/strong\u003e Yes, it is the Jaw Slide with Bolt style, so the bolt is part of this fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the slide be repositioned after it is installed on the tube?\u003c\/strong\u003e Yes, a set screw on the back of the fitting allows the slide to be loosened and moved along the tube, then retightened where needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a set screw included with this jaw slide?\u003c\/strong\u003e Set screws for the jaw slide are sold separately under Sea-Dog part number 299999-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this jaw slide and the hinged version?\u003c\/strong\u003e The 270160-1 is a standard jaw slide that slides directly onto the tube, while Sea-Dog's hinged jaw slide (a separate part number) is used for mounting on handrails or in spots where sliding a fitting onto the tube isn't possible.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this fitting used for?\u003c\/strong\u003e The Sea-Dog Jaw Slide with Bolt is used as part of a Bimini top system to attach an eye end to support tubing, whether installing a new top, adding support arms, or customizing a cockpit or sun deck awning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 270160-1 jaw slide weigh?\u003c\/strong\u003e It weighs 0.23 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 270160-1 jaw slide?\u003c\/strong\u003e The UPC is 035514270076.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog part?\u003c\/strong\u003e Yes, part 270160-1 is a genuine Sea-Dog Jaw Slide with Bolt made from investment cast 316 stainless steel.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988554133723,"sku":"S-D-270160-1","price":14.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7358.jpg?v=1784423021"},{"product_id":"sea-dog-270161-1-jaw-slide-with-bolt-1-od-316-stainless-steel-bimini-top-slide-fitting","title":"Sea-Dog Jaw Slide with Bolt, 1 inch Tube OD, 1\/4 inch Pin, 316 Stainless Steel Bimini Top Fitting","description":"\u003cp\u003eThis Sea-Dog Jaw Slide with Bolt secures an eye end to Bimini top support tubing, making it a core connector for building a new Bimini top system, adding extra support arms to an existing frame, or customizing a cockpit or sun deck awning. The jaw pivots on the tube and a set screw on the back lets you slide the fitting along the tube and lock it wherever the support arm needs to attach, so you can fine-tune the angle and position of the top without cutting or redrilling the frame.\u003c\/p\u003e\u003cp\u003eIt is machined from investment cast 316 stainless steel for corrosion resistance in saltwater environments, and is sized for 1 inch outer diameter tubing with a 1\/4 inch pin. This model fits stainless tubing with a 0.049 inch wall thickness. Installation requires a 1\/8 inch Allen wrench, and matching set screws are available separately if replacements are needed. The fitting is sold per pair.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 270161-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Jaw Slide with Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Outer Diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin\/Screw Part Number:\u003c\/strong\u003e 0P27001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Tube Wall Thickness:\u003c\/strong\u003e 0.049 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.266 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Requires 1\/8 inch Allen wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit of Sale:\u003c\/strong\u003e Sold per pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514270045\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Bimini Top Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size tubing does the Sea-Dog 270161-1 jaw slide fit?\u003c\/strong\u003e The Sea-Dog 270161-1 is sized for 1 inch outer diameter tubing with a 0.049 inch stainless tube wall thickness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat pin size does this jaw slide use?\u003c\/strong\u003e The 270161-1 jaw slide uses a 1\/4 inch pin, and the matching pin\/screw part number is 0P27001.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many jaw slides come in an order?\u003c\/strong\u003e The Sea-Dog 270161-1 jaw slide is sold per pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 270161-1 jaw slide made from?\u003c\/strong\u003e It is made from investment cast 316 stainless steel, which resists corrosion in saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tool do I need to install the Sea-Dog jaw slide?\u003c\/strong\u003e Installing the 270161-1 jaw slide requires a 1\/8 inch Allen wrench to tighten the set screw and bolt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I adjust the position of the jaw slide after it is installed?\u003c\/strong\u003e Yes, a set screw on the back of the 270161-1 jaw slide lets you slide the fitting along the tube and lock it in the position needed for the support arm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a jaw slide used for on a Bimini top?\u003c\/strong\u003e A jaw slide like the Sea-Dog 270161-1 attaches an eye end securely to Bimini top support tubing, used when installing a new Bimini top, adding support arms to an existing one, or customizing a cockpit or sun deck awning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre replacement set screws available for the 270161-1 jaw slide?\u003c\/strong\u003e Yes, set screws for the Sea-Dog 270161-1 jaw slide can be purchased separately as part number 299999-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 270161-1 jaw slide and a hinged jaw slide?\u003c\/strong\u003e The 270161-1 is a standard jaw slide that slides directly onto the tubing, while Sea-Dog's hinged jaw slides are designed for mounting on handrails or in applications where sliding the fitting onto the tube is not possible or convenient.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 270161-1 jaw slide weigh?\u003c\/strong\u003e The Sea-Dog 270161-1 jaw slide weighs 0.266 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 270161-1 jaw slide genuine Sea-Dog hardware?\u003c\/strong\u003e Yes, part number 270161-1 is a genuine Sea-Dog jaw slide with bolt, constructed of investment cast 316 stainless steel.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988554166491,"sku":"S-D-270161-1","price":14.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7358_d75dc95e-f6a1-487d-966e-d5e5b166ec55.jpg?v=1784423027"},{"product_id":"sea-dog-270165-1-jaw-slide-with-bolt-3-4-bimini-top-slide-fitting-investment-cast-316-stainless-steel","title":"Sea-Dog Jaw Slide with Bolt, 3\/4 Inch Tube, 316 Stainless Steel, Each","description":"\u003cp\u003eThe Sea-Dog Jaw Slide with Bolt is a slide-on fitting used to attach the eye end of a Bimini top or awning support arm securely to tubing. It slides directly onto tubing and is held in place with a set screw on the back, allowing the fitting to be quickly and easily repositioned wherever it is needed along the tube. This makes it a practical choice for installing a new Bimini top, adding support arms to an existing top, or customizing a cockpit or sun deck awning.\u003c\/p\u003e\u003cp\u003eThis jaw slide is sized for 3\/4 inch tubing and uses a 1\/4 inch pin\/bolt. It is constructed of investment cast 316 stainless steel for corrosion resistance in a marine environment, and is designed for stainless tube with a wall thickness of 0.049 inch. Installation requires a 1\/8 inch Allen wrench. The set screw is not included and can be purchased separately. Each unit is sold individually.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 270165-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Jaw Slide with Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase\/Tube Size:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin\/Screw Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Part Number:\u003c\/strong\u003e 0P27001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment cast 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Wall Thickness Compatibility:\u003c\/strong\u003e 0.049 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Required for Installation:\u003c\/strong\u003e 1\/8 inch Allen wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5.81 x 3.88 x 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Case Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514270274\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size tubing does the Sea-Dog Jaw Slide 270165-1 fit?\u003c\/strong\u003e This jaw slide is sized for 3\/4 inch tubing and uses a 1\/4 inch pin\/bolt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Jaw Slide with Bolt used for?\u003c\/strong\u003e It is used as part of a Bimini top system to attach an eye end securely to support tubing, whether installing a new Bimini top, adding support arms to an existing one, or customizing a cockpit or sun deck awning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 270165-1 Jaw Slide made from?\u003c\/strong\u003e It is constructed of investment cast 316 stainless steel, which resists corrosion in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the jaw slide attached to the tubing?\u003c\/strong\u003e The fitting slides onto the tubing and is secured with a set screw on the back, which also allows the slide to be repositioned along the tube as needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a set screw included with this jaw slide?\u003c\/strong\u003e No, the set screw is not included with the Sea-Dog 270165-1 Jaw Slide; it can be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tool is needed to install the jaw slide?\u003c\/strong\u003e A 1\/8 inch Allen wrench is required to install the Sea-Dog Jaw Slide with Bolt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of part 270165-1?\u003c\/strong\u003e The Sea-Dog Jaw Slide with Bolt measures 5.81 x 3.88 x 1.25 inches and weighs 0.15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tube wall thickness is this jaw slide designed for?\u003c\/strong\u003e It is designed for stainless tubing with a wall thickness of 0.049 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many jaw slides come in the package?\u003c\/strong\u003e The Sea-Dog 270165-1 Jaw Slide with Bolt is sold individually, one per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this jaw slide and the hinged jaw slide?\u003c\/strong\u003e The standard Jaw Slide with Bolt (270165-1) slides directly onto the end of a tube, while Sea-Dog's Hinged Jaw Slide is designed for mounting on handrails or in applications where sliding the fitting onto the tubing is not possible or convenient.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this jaw slide genuine Sea-Dog hardware?\u003c\/strong\u003e Yes, part 270165-1 is a genuine Sea-Dog Jaw Slide with Bolt made from investment cast 316 stainless steel.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988554199259,"sku":"S-D-270165-1","price":13.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7129.jpg?v=1784423037"},{"product_id":"sea-dog-270166-1-hinged-jaw-slide-with-bolt-7-8-tubing-316-stainless-steel-bimini-top-slide-fitting","title":"Sea-Dog Hinged Jaw Slide with Bolt, 7\/8 Inch Tube, 316 Stainless Steel Bimini Top Fitting","description":"\u003cp\u003eThe Sea-Dog Hinged Jaw Slide with Bolt (270166-1) is a Bimini top hardware fitting used to attach an eye end securely to support tubing. It is built for boat owners installing a new Bimini top, adding extra support arms to an existing frame, or customizing a cockpit or sun deck awning. Unlike a standard slide-on jaw slide, this version is hinged, so it can be mounted on handrails or in other applications where sliding the fitting onto the end of the tubing is not possible or convenient. A set screw on the back of the fitting lets you quickly and easily adjust where it sits on the tubing once installed.\u003c\/p\u003e\u003cp\u003eThis fitting is sized for 7\/8 inch tubing with a 1\/4 inch pin, and it is rated for stainless tube with a wall thickness of 0.049 inch. It is constructed of investment cast 316 stainless steel, giving it strong resistance to marine corrosion. Installation requires only a 1\/8 inch Allen wrench. Replacement set screws are available separately under part number 299999-1 if the original set screw is lost or worn.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 270166-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hinged Jaw Slide with Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase\/Tube Size:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment cast 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Stainless Tube Wall Thickness:\u003c\/strong\u003e 0.049 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 8 x 6 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.314 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514270670\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Tool Required:\u003c\/strong\u003e 1\/8 inch Allen wrench\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits 7\/8 inch diameter support tubing\u003c\/li\u003e\n\u003cli\u003eIdeal for handrail mounting or locations where a slide-on fitting cannot be used\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size tubing does the Sea-Dog 270166-1 Hinged Jaw Slide fit?\u003c\/strong\u003e This fitting is sized for 7\/8 inch diameter support tubing and uses a 1\/4 inch pin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this hinged jaw slide and a standard jaw slide?\u003c\/strong\u003e A standard jaw slide is designed to slide onto the open end of a tube, while the 270166-1 Hinged Jaw Slide opens on a hinge so it can be mounted on handrails or in spots where the tube end is not accessible.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 270166-1 Jaw Slide made of?\u003c\/strong\u003e It is made of investment cast 316 stainless steel, which resists corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you install the Sea-Dog Hinged Jaw Slide?\u003c\/strong\u003e Installation requires only a 1\/8 inch Allen wrench to tighten the set screw that secures the fitting to the tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the position of the fitting be adjusted after installation?\u003c\/strong\u003e Yes, a set screw on the back of the 270166-1 allows you to loosen it and slide or reposition the fitting along the tubing as needed, then retighten.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 270166-1 part number weigh?\u003c\/strong\u003e The Sea-Dog Hinged Jaw Slide with Bolt weighs 0.314 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum stainless tube wall thickness this fitting works with?\u003c\/strong\u003e It is rated for stainless tube with a wall thickness of 0.049 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre replacement set screws available for this fitting?\u003c\/strong\u003e Yes, replacement set screws for the 270166-1 Hinged Jaw Slide are sold separately under part number 299999-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this fitting used for?\u003c\/strong\u003e The 270166-1 Hinged Jaw Slide with Bolt is used as part of a Bimini top system, whether installing a new top, adding support arms to an existing frame, or customizing a cockpit or sun deck awning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a hinged jaw slide instead of a regular one?\u003c\/strong\u003e Because it opens on a hinge, the Sea-Dog 270166-1 can be fitted onto handrails or other locations where a slide-on style jaw slide cannot be installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 270166-1 fitting?\u003c\/strong\u003e The Sea-Dog Hinged Jaw Slide with Bolt measures 8 x 6 x 4 inches.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988554232027,"sku":"S-D-270166-1","price":30.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7129_d3deff29-e7f4-4ca7-aee6-1de0bfc90db0.jpg?v=1784423049"},{"product_id":"sea-dog-270180-1-top-insert-for-7-8-tubing-1-4-pin-316-stainless-bimini-top-fitting","title":"Sea-Dog Top Insert for 7\/8 Inch Tube, 316 Stainless Steel, Part 270180-1","description":"\u003cp\u003eThe Sea-Dog 270180-1 Top Insert creates an attachment and pivot point as part of a Bimini top system. It is sized as an insert for 3\/4 inch or 7\/8 inch OD tubing, and this version fits 7\/8 inch tube with a 1\/4 inch pin size. The insert is constructed of corrosion resistant investment cast 316 stainless steel, built for the marine environment where standard hardware corrodes and fails. The stainless tube used with this fitting has a wall thickness of 0.049 inch.\u003c\/p\u003e\u003cp\u003eInstallation requires a 1\/8 inch Allen wrench. Set screws are not included with the insert and can be purchased separately (Sea-Dog part 299999-1). The 270180-1 is sold individually, so order the quantity needed for your Bimini top frame. If a different tube size is required, Sea-Dog offers this same insert design in other sizes, including a 3\/4 inch OD version (270175-1) and a square tube version for 1 inch x 1 inch inside dimension square tubing (270191-1) commonly found on pontoon boats, as well as heavy duty and larger round-tube top caps -- these are separate part numbers, so confirm tube size and shape before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 270180-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Top Insert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Outer Diameter:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment cast 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Wall Thickness:\u003c\/strong\u003e 0.049 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5.75 x 1.75 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514270304\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Bimini Top Hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Tool Required:\u003c\/strong\u003e 1\/8 inch Allen wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Sold each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat tube size does the Sea-Dog 270180-1 top insert fit?\u003c\/strong\u003e The 270180-1 is sized as an insert for 7\/8 inch OD tubing, with a 1\/4 inch pin size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 270180-1 top insert made of?\u003c\/strong\u003e It is made of investment cast 316 stainless steel, which resists corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 270180-1 top insert weigh?\u003c\/strong\u003e It weighs 0.16 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tool do I need to install the 270180-1 top insert?\u003c\/strong\u003e Installation requires a 1\/8 inch Allen wrench.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre set screws included with the Sea-Dog 270180-1 top insert?\u003c\/strong\u003e No, set screws are not included and are sold separately as Sea-Dog part 299999-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the tube wall thickness this insert is designed for?\u003c\/strong\u003e The stainless tubing used with the 270180-1 insert has a wall thickness of 0.049 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the function of the 270180-1 top insert on a Bimini top?\u003c\/strong\u003e It creates an attachment point and functions as a pivot point as part of a Bimini top system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 270180-1 sold as a single piece or in a set?\u003c\/strong\u003e The 270180-1 top insert is sold individually (each).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 270180-1 top insert?\u003c\/strong\u003e The 270180-1 measures 5.75 x 1.75 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a version of this insert for a different tube size?\u003c\/strong\u003e Yes, Sea-Dog makes the same insert design for 3\/4 inch OD tubing (part 270175-1) and for 1 inch x 1 inch inside dimension square tubing (part 270191-1) used on pontoon boats -- these are separate part numbers from the 270180-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 270180-1 top insert?\u003c\/strong\u003e The UPC for the 270180-1 top insert is 035514270304.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 270180-1 come with a cap for round tubing instead of an insert?\u003c\/strong\u003e The 270180-1 is the insert version for 3\/4 inch or 7\/8 inch OD tubing; Sea-Dog separately offers top caps such as the 270103 and heavy duty 270111-1 for round tubing from 7\/8 inch to 1-1\/8 inch.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988554264795,"sku":"S-D-270180-1","price":10.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6834_8839443e-b34e-4648-9f43-f9ae2f068df1.jpg?v=1784423062"},{"product_id":"sea-dog-270200-1-90-degree-deck-hinge-316-stainless-steel-3-4-x-2-1-4-base-bimini-top-mount-hinge-fitting","title":"Sea-Dog 90 Degree Deck Hinge, 3\/4\" x 2-1\/4\" Base, 316 Stainless Steel, Part 270200-1","description":"\u003cp\u003eThe Sea-Dog 270200-1 is a 90 degree top mount deck hinge built for Bimini top applications, letting you attach an eye end fitting horizontally to a flat deck or gunwale surface. It is investment cast from 316 stainless steel, giving it strong resistance to salt water corrosion and long-term durability in a marine environment. The hinge has a 3\/4\" x 2-1\/4\" base footprint and uses a 1\/4\" pin size, matching the standard top mount hinge fittings in the Sea-Dog line. This is the fixed-pin version of the 90 degree hinge (a removable-pin version is offered separately as part number 270210-1, so be sure to order 270200-1 if you need the standard fixed-pin style). Installation is straightforward: the hinge base has mounting holes for two #10 flat head fasteners (fasteners are not included and must be purchased separately). Once installed, it provides a secure horizontal pivot point for Bimini top struts, canopy frames, and similar folding hardware where a 90 degree mounting angle is required. At approximately 0.21 pounds, it is a lightweight, low-profile fitting that will not add noticeable weight to a top assembly. Sea-Dog Line has manufactured marine hardware since 1933, and this deck hinge reflects that long history of boat deck hardware production.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 270200-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 90 Degree Deck Hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Size:\u003c\/strong\u003e 3\/4 inch x 2-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #10 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 6 inches L x 4 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unfinished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Deck Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.21 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Style:\u003c\/strong\u003e Fixed Pin\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal Bimini top and canopy hardware application; not vehicle or engine specific.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat angle does the Sea-Dog 270200-1 deck hinge mount at?\u003c\/strong\u003e The 270200-1 is a 90 degree top mount hinge, designed to mount horizontally and attach an eye end fitting for Bimini top applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the base size and pin size of this hinge?\u003c\/strong\u003e It has a 3\/4 inch x 2-1\/4 inch base and uses a 1\/4 inch pin, matching the standard Sea-Dog top mount hinge dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 270200-1 deck hinge made from?\u003c\/strong\u003e It is made from investment cast 316 stainless steel, which resists corrosion in salt water and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hinge have a removable pin?\u003c\/strong\u003e No, part number 270200-1 has a fixed pin. Sea-Dog offers a separate removable-pin version under part number 270210-1 with the same 3\/4 inch x 2-1\/4 inch base and 1\/4 inch pin, so choose the part number that matches whether you need a quick-release pin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with the deck hinge?\u003c\/strong\u003e No, fasteners are not included. The hinge is designed to install with two #10 flat head screws that must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 270200-1 weigh?\u003c\/strong\u003e The 270200-1 deck hinge weighs 0.21 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this hinge used for?\u003c\/strong\u003e It is used to attach an eye end fitting horizontally to a deck or flat mounting surface, most commonly for Bimini top struts and canopy frame hardware on boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hinge be used on a sloped or angled surface?\u003c\/strong\u003e The 270200-1 is a standard 90 degree flat-mount hinge; Sea-Dog's angled hinges (such as the 10 degree angle base deck hinge) are the versions intended for slanted or angled mounting surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 270200-1 hinge genuine Sea-Dog hardware?\u003c\/strong\u003e Yes, 270200-1 is the genuine Sea-Dog part number for this 90 degree deck hinge, manufactured by Sea-Dog Line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this deck hinge?\u003c\/strong\u003e Each unit is the 270200-1 90 degree deck hinge itself; mounting fasteners are not included and need to be sourced separately.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988554297563,"sku":"S-D-270200-1","price":13.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7882.jpg?v=1784423070"},{"product_id":"sea-dog-270167-1-hinged-jaw-slide-with-bolt-1-in-investment-cast-316-stainless-steel-bimini-top-slide-fitting-fits-3-4-in-to-1-1-8-in-tubing","title":"Sea-Dog Hinged Jaw Slide with Bolt, 1 Inch Base, 316 Stainless Steel, 270167-1","description":"\u003cp\u003eThe Sea-Dog Hinged Jaw Slide with Bolt (270167-1) is a Bimini top hardware fitting used to attach an eye end securely to support tubing. It is used when installing a new Bimini top, adding a support arm to an existing top, or customizing a cockpit or sun deck awning. Because the fitting is hinged rather than a closed slide-on collar, it can be installed onto the tubing without having to remove the top from the boat or take off the canvas, end fitting, or straps to fit a new piece - making it especially useful for mounting on handrails or in other spots where sliding a standard fitting onto the tube is not practical.\u003c\/p\u003e\u003cp\u003eThis Hinged Jaw Slide has a 1 inch base and a 1\/4 inch pin, and uses pin\/screw part number 0P27001. A set screw on the back allows the fitting to be quickly and easily repositioned along the tubing once installed, and it is designed for tubing from 3\/4 inch up to 1-1\/8 inch, with a stainless tube wall thickness of 0.049 inch. Installation requires a 1\/8 inch Allen wrench. A replacement set screw can be purchased separately as Sea-Dog part 299999-1. The fitting is constructed of corrosion resistant investment cast 316 stainless steel for durability in the marine environment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 270167-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Hinged Jaw Slide with Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Size:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin\/Screw Part Number:\u003c\/strong\u003e 0P27001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment cast 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTubing Compatibility:\u003c\/strong\u003e 3\/4 inch to 1-1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless Tube Wall Thickness:\u003c\/strong\u003e 0.049 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Tool Required:\u003c\/strong\u003e 1\/8 inch Allen wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.376 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Standard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514270908\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size tubing does the Sea-Dog 270167-1 Hinged Jaw Slide fit?\u003c\/strong\u003e The 270167-1 Hinged Jaw Slide is designed for tubing from 3\/4 inch up to 1-1\/8 inch in diameter, with a stainless tube wall thickness of 0.049 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a hinged jaw slide instead of a standard jaw slide?\u003c\/strong\u003e Because the 270167-1 opens on a hinge, it can be installed directly onto the support tubing without removing the Bimini top from the boat or taking off the canvas, end fitting, or straps - unlike a standard slide-on jaw fitting, which has to be threaded onto the tube before those pieces are attached.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this jaw slide made of?\u003c\/strong\u003e Sea-Dog part 270167-1 is constructed of corrosion resistant investment cast 316 stainless steel, suitable for marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat base and pin size does part 270167-1 have?\u003c\/strong\u003e This Hinged Jaw Slide with Bolt has a 1 inch base and a 1\/4 inch pin, and uses pin\/screw part number 0P27001.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you adjust the position of the fitting once it's on the tube?\u003c\/strong\u003e A set screw on the back of the 270167-1 lets you loosen it, slide the fitting to the desired position on the tubing, and retighten it in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tool is needed to install this fitting?\u003c\/strong\u003e Installing the Sea-Dog 270167-1 Hinged Jaw Slide requires a 1\/8 inch Allen wrench.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the set screw included, and can a replacement be purchased?\u003c\/strong\u003e Yes, the set screw is part of the 270167-1 fitting; a replacement set screw is available separately as Sea-Dog part 299999-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this part weigh?\u003c\/strong\u003e The Sea-Dog Hinged Jaw Slide with Bolt, part 270167-1, weighs 0.376 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this fitting used for on a boat?\u003c\/strong\u003e This fitting is used as part of a Bimini top system - to install a new top, add an additional support arm to an existing one, or customize a cockpit or sun deck awning by attaching an eye end securely to the support tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog part?\u003c\/strong\u003e Yes, this is a genuine Sea-Dog Hinged Jaw Slide with Bolt, manufacturer part number 270167-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this type of fitting typically mounted?\u003c\/strong\u003e The hinged design of the 270167-1 makes it well suited for mounting on handrails or in other locations where it isn't possible or convenient to slide a standard fitting onto the tubing.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988554363099,"sku":"S-D-270167-1","price":38.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7129_2ef9057d-fc95-41b9-bfeb-e373d1522661.jpg?v=1784423081"},{"product_id":"sea-dog-1-concave-base-deck-hinge-with-removable-pin-316-stainless-steel-rail-mount-for-1-bimini-top-tubing-270245-1","title":"Sea-Dog 1 Inch Concave Base Deck Hinge with Removable Pin, 316 Stainless Steel Rail Mount Fitting - 270245-1","description":"\u003cp\u003eThe Sea-Dog 270245-1 is a 1 inch concave base deck hinge with a removable pin, built to mount an eye end for Bimini top applications. The concave base is shaped to rail mount on 1 inch tubing, giving a secure, flush fit against curved rail surfaces. Unlike a fixed-pin hinge, this version uses a spring loaded quick release pin so the top can be removed and reattached in seconds without tools, which is useful for storage, trailering, or quick access to the boat.\u003c\/p\u003e\u003cp\u003eThe hinge is constructed of investment cast 316 stainless steel, chosen for its corrosion resistance in saltwater and marine environments. The base measures 3\/4 inch by 2-1\/4 inch and uses a 1\/4 inch diameter pin. It installs with two #10 flat head fasteners, which are not included, so the mounting hardware should be sourced separately based on the mounting surface. This hinge is part of Sea-Dog's Side Mount Hinge Fittings line used across Bimini top and canvas hardware applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 270245-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Concave Base Deck Hinge (Removable Pin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment cast 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimensions:\u003c\/strong\u003e 3\/4 inch x 2-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Diameter:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #10 flat head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Rail mount, fits 1 inch tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unfinished stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.236 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514270151\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 270245-1 and a fixed-pin deck hinge?\u003c\/strong\u003e The 270245-1 uses a spring loaded, removable pin that lets the Bimini top be released and taken off quickly without tools, while a fixed-pin concave deck hinge of the same base size does not offer that quick release feature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size pin does this deck hinge use?\u003c\/strong\u003e The Sea-Dog 270245-1 uses a 1\/4 inch diameter pin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the deck hinge made of?\u003c\/strong\u003e It is made of investment cast 316 stainless steel, which resists corrosion in marine and saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the base dimensions of the 270245-1 hinge?\u003c\/strong\u003e The base measures 3\/4 inch by 2-1\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 270245-1 come with mounting screws?\u003c\/strong\u003e No, it installs with two #10 flat head fasteners that are not included, so screws need to be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this deck hinge used for?\u003c\/strong\u003e It is designed to mount horizontally and attach an eye end for Bimini top applications, with a concave base that rail mounts on 1 inch tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 270245-1 deck hinge weigh?\u003c\/strong\u003e It weighs 0.236 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 270245-1 be used on angled or sloped surfaces?\u003c\/strong\u003e No, this concave base hinge is designed for rail mounting on 1 inch tubing; angled surfaces like sloped gunwales require Sea-Dog's angle base hinges, which are separate part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the pin on this hinge removable?\u003c\/strong\u003e Yes, the 270245-1 features a spring loaded quick release pin so the Bimini top can be removed easily.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 270245-1 have?\u003c\/strong\u003e It has an unfinished stainless steel finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 270245-1 deck hinge?\u003c\/strong\u003e The UPC is 035514270151.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988555575515,"sku":"S-D-270245-1","price":16.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7882_9a1fc195-5658-49b0-bd3d-e7573fd2a694.jpg?v=1784423115"},{"product_id":"sea-dog-273162-1-hinged-jaw-slide-bimini-fitting-with-bolt-black-nylon-fits-7-8-tubing","title":"Sea-Dog Hinged Jaw Slide Fitting with Bolt, Black, 7\/8 Inch Tube - 273162-1","description":"\u003cp\u003eThe Sea-Dog 273162-1 is a hinged jaw slide fitting used as part of a Bimini top system, either for installing a new Bimini top onto boat rails or for adding additional support arms to an existing top. The hinged design allows the fitting to attach an eye end securely to support tubing without needing to slide the fitting onto the end of the tube first, which makes it ideal for mounting on handrails or in other applications where sliding a fitting onto the tubing is not possible or convenient.\u003c\/p\u003e\u003cp\u003eThis jaw slide is sized for 7\/8 inch tubing and uses a 1\/4 inch pin with a bolt-secured hinge. It is constructed of injection molded nylon that is UV resistant, making it suited to ongoing exposure to sun and marine conditions. The fitting is finished in black and comes with the mounting screw (screw part 0P27001) included. A version for 7\/8 inch tubing with a 3\/16 inch pin and non-hinged slide-on design is also available as a separate part for applications where the fitting can be slid directly onto the tube end.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 273162-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Hinged Jaw Slide w\/Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube O.D.:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Part Number:\u003c\/strong\u003e 0P27001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection molded nylon, UV resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514273992\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits 7\/8 inch diameter tubing\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 273162-1 jaw slide used for?\u003c\/strong\u003e The 273162-1 is a hinged jaw slide fitting used in Bimini top systems to attach an eye end securely to support tubing, whether installing a new Bimini top on boat rails or adding extra support arms to an existing top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size tubing does this fitting work with?\u003c\/strong\u003e This hinged jaw slide is sized for 7\/8 inch tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is it called a hinged jaw slide instead of a regular jaw slide?\u003c\/strong\u003e The hinge lets the 273162-1 attach directly to the tubing in place, rather than requiring the fitting to be slid onto the end of the tube, which makes it useful for mounting on handrails or in spots where sliding a fitting on is not convenient.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 273162-1?\u003c\/strong\u003e This jaw slide fitting is black. A white version is also produced as a separate part number for buyers who need to match different hardware colors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the fitting made of?\u003c\/strong\u003e It is constructed of injection molded nylon that is UV resistant for continued outdoor and marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fitting come with mounting hardware?\u003c\/strong\u003e Yes, the 273162-1 hinged jaw slide includes its mounting screw, listed under screw part number 0P27001.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this part weigh?\u003c\/strong\u003e The Sea-Dog 273162-1 hinged jaw slide weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat pin size does the hinge use?\u003c\/strong\u003e The hinge pin on this jaw slide fitting is 1\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from the standard (non-hinged) 7\/8 inch jaw slide?\u003c\/strong\u003e The standard slide-on jaw slide for 7\/8 inch tubing uses a 3\/16 inch pin and is designed to slide onto the tube end, while the hinged 273162-1 uses a 1\/4 inch pin and bolt so it can be installed without sliding it onto the tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fitting work on 1 inch square tubing used on pontoon boats?\u003c\/strong\u003e No, the 273162-1 is a round-jaw fitting for 7\/8 inch tubing; square tube jaw slides for 1 inch by 1 inch pontoon tubing are separate part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many units come in a package?\u003c\/strong\u003e The 273162-1 hinged jaw slide is packed 10 each per standard pack.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988559048923,"sku":"S-D-273162-1","price":4.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7130.jpg?v=1784423122"},{"product_id":"sea-dog-273300-1-bimini-top-tube-connector-for-7-8-od-tubing-black-uv-resistant-nylon","title":"Sea-Dog 273300-1 Nylon Tube Connector, Fits 7\/8 Inch Tubing, Black","description":"\u003cp\u003eThe Sea-Dog 273300-1 Tube Connector joins the ends of stainless steel or aluminum bimini top tubing by sliding inside the tube ends, creating a secure internal splice without external hardware. It is sized to fit 7\/8 inch outer diameter tubing, with the connector body stepping from 3\/4 inch at one end to 7\/8 inch at the other so it seats snugly inside standard bimini top and canopy frame tubing. The connector is injection molded from UV resistant nylon, a material chosen to withstand sun, salt spray, and marine weather without becoming brittle or discolored over time. At 2-1\/4 inches long, it provides enough internal bearing surface to keep the joined tube sections aligned and secure. Finished in black, it works with black-finished bimini top and canopy frame hardware. Because it fits inside the tube rather than clamping around it, no separate fasteners are required for the splice itself. This connector is intended for tube-to-tube connections and is not a quick-release or hinged fitting; boaters needing a quick-release eye connection at a mounting point should use a dedicated eye end and bracket instead. It is a straightforward, purpose-built replacement or spare for anyone repairing or fabricating a bimini top or canopy frame.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 273300-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Bimini Top Hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Nylon, UV Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Tube Outer Diameter:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Diameter A:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Diameter B:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 2-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.092 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514273350\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits 7\/8 inch outer diameter stainless steel or aluminum bimini top and canopy tubing\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size tubing does the Sea-Dog 273300-1 tube connector fit?\u003c\/strong\u003e It fits 7\/8 inch outer diameter tubing, sliding inside the tube ends to join two sections of stainless steel or aluminum bimini top or canopy frame tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this connector work with both stainless steel and aluminum tubing?\u003c\/strong\u003e Yes, the 273300-1 connector is designed to connect the ends of either stainless steel or aluminum tubing by sliding inside the tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 273300-1 connector made from?\u003c\/strong\u003e It is constructed of UV resistant injection molded nylon, which resists sun and salt exposure without becoming brittle or fading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the tube connector?\u003c\/strong\u003e The Sea-Dog 273300-1 measures 2-1\/4 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 273300-1 tube connector?\u003c\/strong\u003e It is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this part weigh?\u003c\/strong\u003e The Sea-Dog 273300-1 weighs 0.092 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the tube connector install?\u003c\/strong\u003e It slides directly inside the ends of two tube sections to splice them together, so no separate fasteners are needed for the connection itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 273300-1 come with mounting hardware or fasteners?\u003c\/strong\u003e No, since the connector slides inside the tube ends, it does not require or include fasteners for the splice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 273300-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, 273300-1 is the Sea-Dog manufacturer part number for this nylon tube connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this tube connector and a quick release eye end?\u003c\/strong\u003e The 273300-1 is a straight tube-to-tube splice connector, while Sea-Dog's quick release side mount eye ends and brackets create a hinged, removable eye fitting; they are separate parts for different purposes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this tube connector typically used for?\u003c\/strong\u003e It is used on bimini tops and canopy frames to join the cut ends of 7\/8 inch outer diameter support tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the diameter of the connector change from one end to the other?\u003c\/strong\u003e Yes, the 273300-1 steps from 3\/4 inch at one end to 7\/8 inch at the other so it seats inside standard bimini top tubing.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988559835355,"sku":"S-D-273300-1","price":2.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7215.jpg?v=1784423157"},{"product_id":"sea-dog-273565-1-bracket-mount-jaw-slide-uv-resistant-nylon-bimini-top-fitting-sold-per-pair","title":"Sea-Dog Bracket Mount Jaw Slide 273565-1, Nylon Bimini Top Fitting, Black, Sold in Pairs","description":"\u003cp\u003eThe Sea-Dog 273565-1 Bracket Mount Jaw Slide is a component of a Bimini top canvas fitting system, designed to mount on the side of the gunnel so a matching jaw slide can snap onto it. Once in place, the jaw slide glides along the bracket and is adjusted and secured with a head screw fitting, allowing the bow leg or top frame to shift fore and aft for proper canvas tension and positioning. The bracket is constructed of UV resistant injection molded nylon, giving it resistance to sun exposure, salt spray, and everyday marine wear without corroding like metal hardware can. It installs to the gunnel using two #8 flat head fasteners, which are not included and must be sourced separately. This bracket fitting is a universal Bimini top hardware component rather than a boat- or engine-specific part, so it is compatible with Bimini top systems that use this style of jaw slide and bracket mounting hardware. It is sold as a pair (two brackets), finished in black to blend in with most canvas and hardware color schemes. Boat owners replacing worn, cracked, or missing jaw slide brackets, or building out a new Bimini top mounting point, can use this bracket as a direct, like-for-like replacement or addition to their existing top fitting hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 273565-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Bracket Mount Jaw Slide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension F:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Wall Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Two #8 flat head fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514274579\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal Bimini top hardware component, not tied to a specific boat make, model, or year; it fits Bimini top systems using this style of jaw slide and bracket mounting hardware.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 273565-1 Bracket Mount Jaw Slide used for?\u003c\/strong\u003e It is a bracket fitting that mounts to the side of the gunnel as part of a Bimini top canvas system, giving a jaw slide fitting a track to snap onto and glide along for adjusting top position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 273565-1 bracket come with mounting screws?\u003c\/strong\u003e No, the Sea-Dog 273565-1 bracket installs with two #8 flat head fasteners, and those fasteners are not included with the bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many brackets come in one order of part number 273565-1?\u003c\/strong\u003e The 273565-1 Bracket Mount Jaw Slide is sold as a pair, so one order includes two brackets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 273565-1 bracket made from?\u003c\/strong\u003e It is made of UV resistant injection molded nylon, which resists cracking and fading from sun and saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog 273565-1 jaw slide bracket?\u003c\/strong\u003e This bracket is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 273565-1 bracket weigh?\u003c\/strong\u003e The Sea-Dog 273565-1 Bracket Mount Jaw Slide weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 273565-1 bracket?\u003c\/strong\u003e The bracket measures 2-1\/16 inches (A), 3\/4 inch (B), 5\/16 inch (C), 3\/4 inch (D), 3\/8 inch (E), and 1\/4 inch (F) across its mounting points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 273565-1 bracket work with any jaw slide, or only a matching Sea-Dog part?\u003c\/strong\u003e The 273565-1 bracket is designed for a matching jaw slide fitting to snap onto and glide along it as part of the same Bimini top hardware system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 273565-1 bracket specific to one boat make or model?\u003c\/strong\u003e No, this is a universal Bimini top hardware fitting and is not tied to a specific boat make, model, or year.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 273565-1 bracket adjusted once installed?\u003c\/strong\u003e Once the jaw slide is snapped onto the 273565-1 bracket, it glides along the bracket and is adjusted and secured in position with a head screw fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sea-Dog 273565-1 genuine Sea-Dog hardware or an aftermarket copy?\u003c\/strong\u003e The 273565-1 Bracket Mount Jaw Slide is a genuine Sea-Dog part, made by Sea-Dog for Bimini top fitting systems.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988559868123,"sku":"S-D-273565-1","price":6.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3955.jpg?v=1784423163"},{"product_id":"sea-dog-273568-1-nylon-head-screw-for-bimini-top-jaw-slide-bracket-1-4-28-pair","title":"Sea-Dog Nylon Bimini Top Head Screw, 1\/4-28 x 1-3\/8 Inch, Part 273568-1","description":"\u003cp\u003eThe Sea-Dog 273568-1 Head Screw is the adjustment screw used with Sea-Dog's Jaw Slide and Bracket Fitting system for Bimini tops. It is molded from UV resistant nylon and threads into the jaw slide, where tightening it locks the slide in place along the mounting bracket after you have positioned the Bimini top frame where you want it. Loosening the screw lets the jaw slide glide freely along the bracket for repositioning, so you can fine-tune the angle and tension of your Bimini top canopy without removing any hardware from the boat.\u003c\/p\u003e\u003cp\u003eThis is a standard 1\/4-28 fully threaded machine screw with a flat head, measuring 1-3\/8 inches in overall length. It is molded in black nylon to match Sea-Dog's Jaw Slide and Bracket Fitting line and is sold as a pair. Because it is a nylon component rather than metal, it resists corrosion and UV degradation from long-term sun and saltwater exposure, which is important for hardware that stays exposed on deck. The 273568-1 head screw is a replacement or spare part for boat owners maintaining an existing Sea-Dog jaw slide bracket system, letting you replace a stripped, cracked, or lost screw without buying a whole new slide and bracket set.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 273568-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Head Screw (Bimini Top Jaw Slide Fitting)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/4 inch-28\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Coverage:\u003c\/strong\u003e Fully Threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Length:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Diameter:\u003c\/strong\u003e 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.088 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Resistant:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Sea-Dog Jaw Slide and Bracket Mount Fitting hardware (part numbers 273565-1 and 273660-1 \/ 273665-1) used in Bimini top mounting systems.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 273568-1 used for?\u003c\/strong\u003e It is the head screw that tightens a Sea-Dog Jaw Slide onto its mounting bracket in a Bimini top fitting system, locking the slide in position once the top frame is adjusted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size is the 273568-1 head screw?\u003c\/strong\u003e The 273568-1 is a 1\/4 inch-28 fully threaded machine screw with a flat head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Sea-Dog 273568-1 head screw?\u003c\/strong\u003e It measures 1-3\/8 inches in overall length and 0.25 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 273568-1 head screw made of?\u003c\/strong\u003e It is molded from black, UV resistant injection molded nylon, matching the rest of Sea-Dog's Jaw Slide and Bracket Fitting hardware line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many screws come in a pack?\u003c\/strong\u003e The Sea-Dog 273568-1 is sold as a pair, since a Bimini top jaw slide fitting typically uses one screw per mounting point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this screw work with any Bimini top bracket, or only Sea-Dog's?\u003c\/strong\u003e The 273568-1 is designed specifically for Sea-Dog's Jaw Slide (273565-1) and Slide Bracket (273660-1 \/ 273665-1) fittings and is sized to match that hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 273568-1 head screw corrosion resistant?\u003c\/strong\u003e Yes, because it is nylon rather than metal, the 273568-1 will not rust or corrode from saltwater or marine air exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 273568-1 to replace a lost or stripped jaw slide screw?\u003c\/strong\u003e Yes, it is intended as a replacement part for boat owners who need to re-tighten or replace the screw on an existing Sea-Dog jaw slide bracket without buying a whole new fitting set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog 273568-1?\u003c\/strong\u003e It is black nylon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 273568-1 require any special tools to install?\u003c\/strong\u003e No special tools are required; the head screw threads directly into the jaw slide and is turned by hand or with a standard screwdriver depending on the head drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 273568-1 head screw fully threaded?\u003c\/strong\u003e Yes, the 1\/4 inch-28 screw is fully threaded along its 1-3\/8 inch length.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988559900891,"sku":"S-D-273568-1","price":2.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3955_b80dae94-45fc-41fd-8b1d-f60a75896e12.jpg?v=1784423175"},{"product_id":"sea-dog-273660-1-nylon-slide-bracket-for-bimini-top-fittings-2-3-8-pair-uv-resistant-injection-molded","title":"Sea-Dog Nylon Slide Bracket 273660-1, 2-3\/8 Inch Bimini Top Jaw Slide Mount, Pair","description":"\u003cp\u003eThe Sea-Dog Slide Bracket 273660-1 is a gunnel-mount bracket fitting used in Bimini top fitting systems. It is designed to mount on the side of the boat's gunnel so that a matching jaw slide can snap onto it; the jaw slide then glides along the bracket and is adjusted and secured in place with a head screw. This bracket is sold as a pair and is built from UV resistant injection molded nylon, giving it resistance to sun exposure, salt spray, and general marine weathering without cracking or fading over time.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: each bracket mounts to the gunnel with two #8 flat head fasteners (fasteners are not included). Once mounted, the bracket provides the sliding track that lets the Bimini top jaw slide move fore and aft, making it easy to adjust the top's position and tension before locking it down with the head screw. The compact nylon construction keeps the fitting lightweight while still providing a secure, low-maintenance mounting point that will not corrode like metal hardware can in a marine environment.\u003c\/p\u003e\u003cp\u003eThis is a standard component within Sea-Dog's canvas top fitting lineup and is intended for use with a compatible jaw slide fitting to complete the sliding bracket assembly on a Bimini top.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 273660-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Slide Bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Bimini Top Hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV resistant injection molded nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 13\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.074 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each \/ 10 pairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Two #8 flat head fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514274616\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 273660-1 slide bracket used for?\u003c\/strong\u003e It is a gunnel-mount bracket fitting for a Bimini top, designed so a matching jaw slide can snap onto it and glide along its length for adjusting the top's position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 273660-1 slide bracket sold as a single piece or a pair?\u003c\/strong\u003e The Sea-Dog 273660-1 is sold as a pair (Std. Pack of 10 pairs), so one order provides both brackets needed for a mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 273660-1 slide bracket made from?\u003c\/strong\u003e It is made from UV resistant injection molded nylon, which resists cracking and fading from sun and salt exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 273660-1 slide bracket mounted to the boat?\u003c\/strong\u003e Each Sea-Dog 273660-1 bracket mounts to the side of the gunnel using two #8 flat head fasteners, which are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 273660-1 slide bracket?\u003c\/strong\u003e The Sea-Dog 273660-1 measures 2-3\/8 inches by 1 inch by 13\/16 inch, with an additional 1-11\/16 inch and 1 inch dimension per the manufacturer's bracket measurements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 273660-1 slide bracket weigh?\u003c\/strong\u003e Each Sea-Dog 273660-1 slide bracket weighs 0.074 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 273660-1 bracket come with a jaw slide?\u003c\/strong\u003e No, the 273660-1 is the slide bracket only; a separate matching jaw slide fitting is needed to complete the sliding assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 273660-1 bracket work with any Bimini top jaw slide?\u003c\/strong\u003e The Sea-Dog 273660-1 is designed to work with a Sea-Dog jaw slide fitting sized to snap onto and glide along this bracket's track.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 273660-1 bracket corrosion resistant?\u003c\/strong\u003e Yes, because the Sea-Dog 273660-1 is made of UV resistant injection molded nylon rather than metal, it will not corrode in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 273660-1 slide bracket?\u003c\/strong\u003e The package includes a pair of Sea-Dog 273660-1 slide brackets; mounting fasteners are not included.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988560261339,"sku":"S-D-273660-1","price":3.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3955_6cfbff61-0529-45cc-ae32-7e9f90396af9.jpg?v=1784423181"},{"product_id":"sea-dog-276100-1-top-cap-bimini-fitting-chrome-plated-die-cast-zinc-7-8-tube-od-1-4-pin","title":"Sea-Dog 276100-1 Top Cap Bimini Fitting, 7\/8 Inch Tube, Chrome Plated Die Cast Zinc","description":"\u003cp\u003eThe Sea-Dog 276100-1 Top Cap is a bimini top fitting designed to cap the end of 7\/8 inch tubing on a bimini top frame. It is constructed of die cast zinc with a chrome plated finish, giving it a durable, corrosion-resistant surface with a polished look that matches other chrome bimini hardware.\u003c\/p\u003e\u003cp\u003eThis top cap can be attached to the bimini top railing in one of two ways: with set screws, or by pop riveting it in place using stainless steel or aluminum rivets. Set screws are included when the fitting is purchased in its display-packed form; if purchased in bulk, set screws are sold separately. Installation requires a 1\/8 inch Allen wrench. The fitting uses a 1\/4 inch pin size and is sized for 7\/8 inch outer diameter tubing (stainless tubing with a 0.049 inch wall thickness).\u003c\/p\u003e\u003cp\u003eSea-Dog recommends this fitting for freshwater use. It is sold as bimini top hardware and is commonly paired with other Sea-Dog bimini fittings such as jaw slides and deck hinges to complete a bimini top frame assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 276100-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e Top Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Outer Diameter:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.81 x 3.88 x 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.456 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Freshwater use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Set screw or pop rivet (stainless or aluminum rivets); 1\/8 inch Allen wrench required for set screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514276016\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 7\/8 inch outer diameter bimini top tubing.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size tubing does the Sea-Dog 276100-1 top cap fit?\u003c\/strong\u003e The Sea-Dog 276100-1 Top Cap is sized for 7\/8 inch outer diameter bimini top tubing, with a 1\/4 inch pin size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this bimini top cap installed?\u003c\/strong\u003e The 276100-1 top cap can be attached with set screws or pop riveted in place using stainless steel or aluminum rivets. A 1\/8 inch Allen wrench is needed to install the set screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre set screws included with the Sea-Dog 276100-1?\u003c\/strong\u003e Set screws are included when the 276100-1 top cap is purchased in its display-packed form. If purchased in bulk, set screws must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 276100-1 top cap made of?\u003c\/strong\u003e It is made of die cast zinc with a chrome plated finish, giving the 276100-1 top cap a durable and corrosion-resistant surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 276100-1 top cap suitable for saltwater use?\u003c\/strong\u003e Sea-Dog recommends this top cap fitting for freshwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 276100-1 top cap?\u003c\/strong\u003e The Sea-Dog 276100-1 measures 5.81 x 3.88 x 1.25 inches and weighs 0.456 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cap require riveting, or can it be screwed on?\u003c\/strong\u003e Either method works: the 276100-1 top cap can be secured to the bimini railing with set screws or pop riveted using stainless or aluminum rivets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pin size on the Sea-Dog 276100-1 fitting?\u003c\/strong\u003e The pin size on the 276100-1 top cap is 1\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 276100-1 an authentic Sea-Dog part?\u003c\/strong\u003e Yes, the 276100-1 Top Cap is a genuine Sea-Dog bimini top fitting, chrome plated die cast zinc construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tools do I need to install the Sea-Dog 276100-1?\u003c\/strong\u003e A 1\/8 inch Allen wrench is required to install the 276100-1 top cap when using the included set screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this top cap be used with other Sea-Dog bimini fittings?\u003c\/strong\u003e Yes, the 276100-1 top cap is designed for use in bimini top applications alongside other 7\/8 inch tube Sea-Dog bimini fittings such as jaw slides and deck hinges.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988560621787,"sku":"S-D-276100-1","price":10.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7133.jpg?v=1784423211"},{"product_id":"sea-dog-276160-1-jaw-slide-bimini-top-fitting-chrome-die-cast-zinc-7-8-tube-pair","title":"Sea-Dog 276160-1 Jaw Slide Bimini Fitting, 7\/8 Inch Chrome Plated Zinc, Sold as a Pair","description":"\u003cp\u003eThe Sea-Dog 276160-1 Jaw Slide is a bimini top fitting that connects the top frame tubing to the boat's canvas bow, allowing the bow to pivot and fold as the top is raised or lowered. It is constructed of die cast zinc with a chrome plated finish, matching the look of the rest of the Sea-Dog bimini fitting line, and is recommended for freshwater use.\u003c\/p\u003e\u003cp\u003eThe fitting is sized for 7\/8 inch outer diameter tubing and uses a 1\/4 inch pin. It works with the 0P27001 pin\/screw fastener and installs using a 1\/8 inch Allen wrench. This is a bulk-packed fitting; set screws are not included and can be purchased separately, so display-packed fittings should be checked for included set screws before installing. The jaw slide is sold as a pair, giving you both fittings needed for one side of a bimini top frame connection.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 276160-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Outer Diameter:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin\/Screw Part Number:\u003c\/strong\u003e 0P27001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.518 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2 (sold as a pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.75 x 1.75 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Freshwater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Tool Required:\u003c\/strong\u003e 1\/8 inch Allen wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514276023\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 276160-1 Jaw Slide used for?\u003c\/strong\u003e It is a bimini top fitting that connects the top frame tubing to the boat's canvas bow, letting the bow pivot as the bimini top is raised or folded down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tube size does this jaw slide fit?\u003c\/strong\u003e The Sea-Dog 276160-1 is sized for 7\/8 inch outer diameter tubing and uses a 1\/4 inch pin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 276160-1 sold as a single piece or a pair?\u003c\/strong\u003e It is sold as a pair, giving you two matching die cast zinc, chrome plated jaw slide fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog jaw slide made of?\u003c\/strong\u003e It is die cast zinc with a chrome plated finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 276160-1 include mounting hardware?\u003c\/strong\u003e Set screws are included only with display-packed fittings; for bulk-packed fittings like the 276160-1, set screws can be purchased separately using part number 299999-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tool do I need to install the Sea-Dog 276160-1?\u003c\/strong\u003e A 1\/8 inch Allen wrench is required to install the jaw slide fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fitting recommended for saltwater use?\u003c\/strong\u003e The Sea-Dog 276160-1 is recommended for freshwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 276160-1 weigh?\u003c\/strong\u003e The pair of Sea-Dog jaw slide fittings weighs 0.518 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog jaw slide fitting?\u003c\/strong\u003e Item dimensions are 5.75 x 1.75 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pin\/screw part number used with the 276160-1?\u003c\/strong\u003e The jaw slide uses pin\/screw part number 0P27001.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a jaw slide differ from a top cap fitting?\u003c\/strong\u003e Unlike a fixed top cap fitting, the Sea-Dog 276160-1 jaw slide is designed to pivot, which is what allows the bimini top frame to fold and unfold at that connection point.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988560720091,"sku":"S-D-276160-1","price":17.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7133_f12ff997-59e7-4c69-9a6f-bc98d6c65cc5.jpg?v=1784423221"},{"product_id":"sea-dog-298172-1-bimini-top-strap-1-x-8-black-nylon-webbing-with-stainless-steel-snap-hooks-pair","title":"Sea-Dog Bimini Top Strap 298172-1, Black Nylon Webbing with Stainless Snap Hooks, 1 Inch x 8 Feet, Sold as a Pair","description":"\u003cp\u003eThe Sea-Dog Bimini Strap (part number 298172-1) is a replacement strap for lost or damaged Bimini top straps. It is constructed of 1 inch wide black nylon webbing fitted with corrosion resistant stainless steel snap hooks, giving it the strength to hold a Bimini top secure while resisting UV exposure, saltwater, and general marine wear. Each strap measures 8 feet 1 inch long with a 2-1\/8 inch hook, and the strap is sold in pairs, matching the way Bimini top straps are typically used and replaced on either side of a top.\u003c\/p\u003e\u003cp\u003eThis strap is a straightforward, purpose-built replacement part: no tools or modification are needed beyond attaching the stainless snap hooks to the existing Bimini top hardware. Because it is made from nylon webbing rather than rubber or elastic cord, it holds its length and does not stretch out or sag over a season of use the way some worn factory straps do.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 298172-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon Webbing \/ Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Width:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Length:\u003c\/strong\u003e 8 feet 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook Width:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook Type:\u003c\/strong\u003e Stainless Steel Snap Hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair (2 straps)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.256 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 8.88 x 3.88 x 0.88 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514298049\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal replacement Bimini top strap and is not limited to a specific boat make, model, or engine.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Sea-Dog part 298172-1 used for?\u003c\/strong\u003e Sea-Dog 298172-1 is a replacement Bimini top strap used to replace a lost or damaged strap on a Bimini top, holding the top secured with a stainless steel snap hook.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Sea-Dog 298172-1 Bimini strap?\u003c\/strong\u003e Each strap measures 8 feet 1 inch long and 1 inch wide, with a hook measuring 2-1\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this Bimini strap?\u003c\/strong\u003e The Sea-Dog 298172-1 strap is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 298172-1 come as a single strap or a pair?\u003c\/strong\u003e It is sold as a pair, so both straps needed for a typical Bimini top installation are included in one purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog Bimini strap made of?\u003c\/strong\u003e It is made of 1 inch wide nylon webbing with corrosion resistant stainless steel snap hooks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this strap fit any Bimini top?\u003c\/strong\u003e The Sea-Dog 298172-1 is a universal replacement strap intended to fit Bimini tops that use a compatible snap hook style rather than one specific boat model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 298172-1 Bimini strap weigh?\u003c\/strong\u003e The strap weighs 0.256 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of hook is on the Sea-Dog 298172-1 strap?\u003c\/strong\u003e A corrosion resistant stainless steel snap hook is fitted to each end of the strap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 298172-1 strap resistant to rust and UV?\u003c\/strong\u003e Yes, the nylon webbing resists UV degradation and the stainless steel hooks resist corrosion, which suits the strap for ongoing marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any tools to install the Sea-Dog 298172-1 strap?\u003c\/strong\u003e No special tools are required; the stainless snap hooks attach directly to existing Bimini top hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order Sea-Dog 298172-1?\u003c\/strong\u003e The order includes a pair of black nylon Bimini straps, part number 298172-1, each with a stainless steel snap hook.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988569272539,"sku":"S-D-298172-1","price":10.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8199.jpg?v=1784423519"},{"product_id":"sea-dog-snap-turn-buckle-eyelet-washer-set-stainless-steel-299118-1-2-eyelets-2-washers-for-boat-canvas-covers","title":"Sea-Dog Snap Turn Buckle Eyelet \u0026 Washer Set, Stainless Steel, Part 299118-1","description":"\u003cp\u003eThe Sea-Dog Snap Turn Buckle Eyelet \u0026amp; Washer set, part number 299118-1, is stainless steel replacement hardware used to attach and tension boat canvas, biminis, and covers at their turn buckle mounting points. Each set includes two eyelets and two matching washers, letting you refresh worn or corroded canvas fasteners without replacing the entire snap assembly. The stainless steel construction resists corrosion in marine environments, and the eyelet design accommodates a compatible groove diameter of 0.5 inches, matching standard turn buckle stud hardware used on boat canvas systems. This set is sold as two eyelets and two washers per package, making it easy to service multiple attachment points on a bimini top, camper back, or convertible top in one purchase. Because it is genuine Sea-Dog hardware, it is built to the same dimensions and fit as the original turn buckle components it replaces, so installation is a direct swap using the existing mounting holes in the canvas. This is a small hardware item intended for DIY canvas repair and maintenance rather than a full snap system replacement.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 299118-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Snap Turn Buckle Eyelet (2\/set) and Washer (2\/set)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e Buckle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Groove Diameter:\u003c\/strong\u003e 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.036 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514299237\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Sea-Dog 299118-1 set?\u003c\/strong\u003e Part 299118-1 includes two snap turn buckle eyelets and two matching washers, sold together as one set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this hardware used for?\u003c\/strong\u003e This Sea-Dog eyelet and washer set is used to attach and tension boat canvas, biminis, and covers at their turn buckle mounting points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 299118-1 set made of stainless steel?\u003c\/strong\u003e Yes, the Sea-Dog Snap Turn Buckle Eyelet \u0026amp; Washer set is made of stainless steel for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat groove diameter does this eyelet fit?\u003c\/strong\u003e The Sea-Dog 299118-1 eyelet is compatible with a 0.5 inch groove diameter, matching standard turn buckle stud hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many eyelets and washers come in one package?\u003c\/strong\u003e One package of part 299118-1 contains 2 eyelets and 2 washers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 299118-1 hardware set weigh?\u003c\/strong\u003e The set weighs 0.036 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this to repair an existing canvas snap instead of buying a whole new snap kit?\u003c\/strong\u003e Yes, the Sea-Dog 299118-1 eyelet and washer set is intended for replacing just the eyelet and washer components on existing canvas turn buckle attachment points, without needing to replace the full snap assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this genuine Sea-Dog hardware or an aftermarket copy?\u003c\/strong\u003e This is genuine Sea-Dog branded hardware, part number 299118-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The UPC for the Sea-Dog Snap Turn Buckle Eyelet \u0026amp; Washer set is 035514299237.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fit any boat canvas or cover?\u003c\/strong\u003e The 299118-1 eyelet and washer set fits canvas turn buckle attachment points sized to a 0.5 inch compatible groove diameter; it is standard hardware rather than fitted to a specific boat model.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988569927899,"sku":"S-D-299118-1","price":5.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8206.jpg?v=1784423530"},{"product_id":"sea-dog-299190-1-canvas-snap-tool-with-die-wrench-and-3-removable-dies-for-boat-cover-snaps","title":"Sea-Dog Canvas Snap Tool with Die Wrench and Three Snap Dies, 299190-1","description":"\u003cp\u003eThe Sea-Dog Canvas Snap Tool, part number 299190-1, is a handheld tool for installing and setting canvas snap caps and studs on boat covers, biminis, and other marine canvas. The kit includes a die wrench and three removable dies sized for various snap cap and stud fittings, so one tool handles multiple snap sizes without needing separate setting tools for each. Built of aluminum and steel construction, the tool is sized for a tackle box or tool bag at 7-1\/4 inches by 2-7\/8 inches and weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003eThis tool is intended for standard canvas snaps and is not for use with heavy duty stainless canvas snaps, which require a different setting tool. It is a practical addition to any boat owner's or canvas installer's tool box for mounting, repairing, or replacing snap fasteners on covers and enclosures.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 299190-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Canvas Snap Tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\/Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 7-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Die wrench and three removable dies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Not for use with heavy duty stainless canvas snaps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514299671\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sea-Dog 299190-1 Canvas Snap Tool?\u003c\/strong\u003e The 299190-1 kit includes a die wrench and three removable dies sized for various snap caps and studs, letting one tool set multiple snap sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog Canvas Snap Tool used for?\u003c\/strong\u003e It is used to install and set canvas snap caps and studs on boat covers, biminis, and other marine canvas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 299190-1 canvas snap tool made of?\u003c\/strong\u003e It is constructed of aluminum and steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this tool be used with heavy duty stainless canvas snaps?\u003c\/strong\u003e No, the Sea-Dog 299190-1 is not for use with heavy duty stainless canvas snaps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog Canvas Snap Tool?\u003c\/strong\u003e The tool measures 7-1\/4 inches by 2-7\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 299190-1 Canvas Snap Tool weigh?\u003c\/strong\u003e It weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the die wrench work with different snap sizes?\u003c\/strong\u003e Yes, the 299190-1 comes with three removable dies for various snap cap and stud sizes, in addition to the die wrench.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog Canvas Snap Tool sold individually?\u003c\/strong\u003e Yes, the 299190-1 is packaged as a standard pack of 1 each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes the 299190-1 canvas snap tool?\u003c\/strong\u003e Sea-Dog manufactures the 299190-1 Canvas Snap Tool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 299190-1 Canvas Snap Tool?\u003c\/strong\u003e The UPC for the Sea-Dog Canvas Snap Tool, part number 299190-1, is 035514299671.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988570288347,"sku":"S-D-299190-1","price":28.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6338.jpg?v=1784423541"},{"product_id":"sea-dog-snap-turn-buckle-2-screw-base-nickel-plated-brass-boat-canvas-fastener-2-set-mpn-299116-1","title":"Sea-Dog Snap Turn Buckle - 2 Screw Base, Nickel Plated Brass, 2-Pack","description":"\u003cp\u003eThe Sea-Dog Snap Turn Buckle - 2 Screw Base is a nickel plated brass turn buckle fastener used to secure boat canvas, bimini tops, and convertible covers to a mounting surface with a quick quarter-turn action. Each buckle mounts with a 2-screw base, giving a stable, low-profile attachment point that resists loosening from vibration and repeated opening and closing. The nickel plating over solid brass construction provides corrosion resistance in the marine environment while keeping a clean, finished appearance against canvas and hardware trim.\u003c\/p\u003e\u003cp\u003eThis turn buckle is sold as a 2-piece set, making it easy to replace a matched pair or add new snap turn buckle points to an existing canvas installation. It pairs with Sea-Dog snap turn buckle eyelets, prongs, and back plates for a complete canvas fastening system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 299116-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Snap Turn Buckle - 2 Screw Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nickel Plated Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Style:\u003c\/strong\u003e 2-Screw Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 2 per set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 3.75 inches L x 1.88 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Snap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514299213\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 299116-1 Snap Turn Buckle used for?\u003c\/strong\u003e It is a snap turn buckle fastener that secures boat canvas, bimini tops, or covers to a 2-screw mounting base with a quick quarter-turn action.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many buckles come in a set?\u003c\/strong\u003e The Sea-Dog 299116-1 is sold as a 2-piece set, meaning each package contains 2 snap turn buckles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog Snap Turn Buckle made from?\u003c\/strong\u003e It is made from nickel plated brass, which resists corrosion in marine conditions while keeping a clean finished look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this turn buckle mounted?\u003c\/strong\u003e The 299116-1 mounts using a 2-screw base, which is fastened directly to the canvas frame or mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this snap turn buckle?\u003c\/strong\u003e Each Sea-Dog 299116-1 buckle measures 3.75 inches in length by 1.88 inches in width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog Snap Turn Buckle weigh?\u003c\/strong\u003e The set weighs 0.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this buckle work with existing Sea-Dog canvas snap hardware?\u003c\/strong\u003e Yes, the 299116-1 is designed to pair with Sea-Dog snap turn buckle eyelets, prongs, and back plates as part of a canvas fastening system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog part?\u003c\/strong\u003e Yes, part number 299116-1 is a genuine Sea-Dog Snap Turn Buckle - 2 Screw Base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Sea-Dog 299116-1 have?\u003c\/strong\u003e It has a nickel plated finish over brass construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just one buckle instead of a pair?\u003c\/strong\u003e The 299116-1 is packaged and sold as a 2-piece set, not as an individual buckle.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988570321115,"sku":"S-D-299116-1","price":5.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8206_baa6bddd-cbfb-499b-b36b-9bc83b7c142a.jpg?v=1784423544"},{"product_id":"sea-dog-299981-1-straight-release-pin-lanyard-1-4-x-10-304-stainless-steel-for-bimini-top-hardware","title":"Sea-Dog 299981-1 Straight Release Pin with Lanyard, 1\/4 Inch, 304 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog 299981-1 is a straight release pin with an attached lanyard, designed for use with Bimini top hardware. The pin features a detent ball that allows for quick release when raising, lowering, or removing a Bimini top. It is built from formed 304 stainless steel, giving it strong resistance to marine corrosion and everyday exposure to sun, salt spray, and moisture.\u003c\/p\u003e\u003cp\u003eThis is the straight-pin version, sized at 1\/4 inch in diameter with a 10 inch overall length. The attached lanyard keeps the pin tethered to the hardware fitting, reducing the risk of losing the pin overboard or misplacing it when the top is folded down. It is sold individually and is a simple, functional replacement part for boat owners maintaining or repairing existing Bimini top hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 299981-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Straight release pin with lanyard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Formed 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Diameter:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 15\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514299046\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFor use with Bimini top hardware fittings.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 299981-1 used for?\u003c\/strong\u003e The Sea-Dog 299981-1 is a release pin with an attached lanyard used with Bimini top hardware, allowing quick release of the top's fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the straight or stepped version of the pin?\u003c\/strong\u003e The 299981-1 is the straight version. Sea-Dog also makes a stepped version, part number 299980-1, which is designed to fit threaded hinge fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat diameter and length is the pin?\u003c\/strong\u003e The pin is 1\/4 inch in diameter with a 10 inch overall length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 299981-1 made from?\u003c\/strong\u003e It is constructed of formed 304 stainless steel, which resists corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the pin include a lanyard?\u003c\/strong\u003e Yes, the 299981-1 has an attached lanyard that keeps the pin tethered to the fitting and reduces the risk of it being lost.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the quick-release feature work?\u003c\/strong\u003e The Sea-Dog 299981-1 uses a detent ball on the pin for quick release from Bimini top hardware fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 299981-1 sold individually or in a pack?\u003c\/strong\u003e The 299981-1 is sold per each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of this part?\u003c\/strong\u003e The Sea-Dog 299981-1 weighs 0.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the straight pin and the L-shaped toggle pin?\u003c\/strong\u003e The straight 299981-1 uses a detent ball for quick release, while Sea-Dog's L-shaped toggle pin (299986-1) uses a swivel flip lock and a hinge that prevents the pin from being withdrawn until the locking device is aligned, for added security.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this pin fit threaded hinge fittings?\u003c\/strong\u003e The straight 299981-1 is not the threaded-fitting version; Sea-Dog's stepped pin, part number 299980-1, is the version made to fit threaded hinge fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 299981-1?\u003c\/strong\u003e The UPC for the Sea-Dog 299981-1 release pin with lanyard is 035514299046.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 299981-1 genuine Sea-Dog hardware?\u003c\/strong\u003e Yes, the 299981-1 is a genuine Sea-Dog part, part number 299981-1, made of 304 stainless steel.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988571009243,"sku":"S-D-299981-1","price":7.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7134.jpg?v=1784423557"},{"product_id":"sea-dog-299980-1-stainless-steel-stepped-release-pin-with-lanyard-for-bimini-top-hardware","title":"Sea-Dog Stainless Steel Stepped Release Pin and Lanyard, 1\/4 Inch, Bimini Top Hardware - 299980-1","description":"\u003cp\u003eThe Sea-Dog 299980-1 is a stepped release pin with attached lanyard, built for Bimini top hardware. It uses a detent ball to give a quick, secure release, and the stepped pin design is made specifically to fit threaded hinge fittings, where a straight pin will not seat correctly. The pin steps down from 1\/4 inch to 3\/16 inch, allowing it to pass through the threaded hinge fitting and lock in place with the detent ball. An attached lanyard keeps the pin tethered to the Bimini top frame so it cannot be dropped overboard or lost when the top is folded down or removed for storage.\u003c\/p\u003e\u003cp\u003eConstruction is formed 304 stainless steel throughout, chosen for its resistance to corrosion in salt and fresh water marine environments, so the pin will not seize, pit, or rust with regular exposure to the elements. The compact hardware measures 10 inches overall with a 6 inch section and additional dimensions of 1-3\/8 inch and 3\/16 inch, keeping it sized to fit standard Bimini top hinge and fitting hardware. It is a simple, low-maintenance replacement part for boat owners re-hardware-ing or repairing a Bimini top frame.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 299980-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Stepped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Diameter:\u003c\/strong\u003e 1\/4 inch - 3\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 3\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.054 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 4.94 x 1.88 x 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514299039\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 299980-1 used for?\u003c\/strong\u003e It is a stepped release pin with an attached lanyard, made for Bimini top hardware where the pin needs to release quickly and reattach to a threaded hinge fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'stepped' mean on this release pin?\u003c\/strong\u003e The pin steps down from 1\/4 inch to 3\/16 inch along its length, which lets Sea-Dog part 299980-1 fit threaded hinge fittings that a straight pin cannot seat into correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the release pin come with a lanyard?\u003c\/strong\u003e Yes, the 299980-1 includes an attached lanyard that keeps the pin tethered to the Bimini top frame so it cannot be lost when released or when the top is folded down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the quick release feature work?\u003c\/strong\u003e A detent ball on the pin allows it to lock into the fitting and then release quickly with a pull, which is the mechanism used on the Sea-Dog 299980-1 stepped release pin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 299980-1 release pin made of?\u003c\/strong\u003e It is formed from 304 stainless steel, a corrosion-resistant grade suited to saltwater and freshwater marine use on Bimini top hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is this release pin and lanyard?\u003c\/strong\u003e The Sea-Dog 299980-1 measures 10 inches overall, with additional sections of 6 inches, 1-3\/8 inches, and 3\/16 inch, and a stepped pin diameter of 1\/4 inch to 3\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 299980-1 weigh?\u003c\/strong\u003e The Sea-Dog stepped release pin and lanyard weighs 0.054 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the same as Sea-Dog's straight release pin?\u003c\/strong\u003e No. Sea-Dog part 299980-1 is the stepped version for threaded hinge fittings; the straight version is a separate part number for fittings that take a non-stepped pin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this pin fit a straight (non-threaded) hinge fitting?\u003c\/strong\u003e The 299980-1 is designed for threaded hinge fittings because of its stepped pin profile; a straight pin design is intended for non-threaded fittings instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the pin sold as a single unit or in bulk?\u003c\/strong\u003e The Sea-Dog 299980-1 stepped release pin and lanyard is cataloged with a standard pack of 10 each for bulk distribution.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 299980-1 resist rust and corrosion?\u003c\/strong\u003e Yes, its formed 304 stainless steel construction is corrosion resistant, making it suitable for continuous marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps the pin from falling in the water when released?\u003c\/strong\u003e The attached lanyard on the Sea-Dog 299980-1 tethers the pin to the Bimini top hardware, reducing the risk of losing the pin overboard once it is released.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988571042011,"sku":"S-D-299980-1","price":7.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7134_14aa8367-a9de-454a-b2cf-4b042e6e0159.jpg?v=1784423562"},{"product_id":"attwood-10795-4-deluxe-boat-cover-support-system-telescoping-pole-kit-for-boats-up-to-19-feet","title":"Attwood 10795-4 Deluxe Boat Cover Support System, Fits Boats Up to 19 Feet","description":"\u003cp\u003eThe Attwood Deluxe Boat Cover Support System (10795-4) is designed to elevate a boat cover so rainwater and debris run off instead of pooling in the center. Standing water on a cover adds weight, promotes mildew, and shortens the cover's usable life; this support system is built to prevent that by forming a double ridgeline underneath the cover using a telescoping center pole, a bow spreader, and poly web straps. Attwood states the system can extend the life of a boat cover by as much as 50 percent by keeping water from accumulating on top of it.\u003c\/p\u003e\u003cp\u003eThe 1-inch diameter aluminum center pole telescopes from 28 inches up to 48 inches tall, so it can be adjusted to the profile of the boat and cover. The pole rests on a rubber foot to protect the boat's surface, while the bow spreader and pole work together with the poly web straps to create a peaked, tent-like ridge under the cover. The 1-inch wide black poly web straps attach to the stern using non-marring hooks, keeping the whole system secure without damaging gelcoat or upholstery. This support system is intended for boats up to 19 feet in length.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 10795-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Boat cover support system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Length Compatibility:\u003c\/strong\u003e Up to 19 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Pole Height Range:\u003c\/strong\u003e 28 inches to 48 inches (telescoping)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Pole Diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Pole Material:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Width:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Material:\u003c\/strong\u003e Black poly webbing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Attachment:\u003c\/strong\u003e Non-marring hooks at the stern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 11.5 x 28.25 x 6.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 048903107952\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBoats up to 19 feet in length\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boat sizes does the Attwood 10795-4 cover support system fit?\u003c\/strong\u003e The Attwood 10795-4 Deluxe Boat Cover Support System is intended for boats up to 19 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow tall does the center pole adjust?\u003c\/strong\u003e The telescoping center pole on the 10795-4 adjusts from 28 inches up to 48 inches tall, letting it be set to match the boat's cover profile.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pole made of?\u003c\/strong\u003e It is a 1-inch diameter aluminum pole that rests on a rubber foot to protect the boat's finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this support system attach to the boat?\u003c\/strong\u003e The 1-inch wide black poly web straps included with the 10795-4 attach to the stern using non-marring hooks, so no drilling or hardware installation is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does a boat cover need a support system like this?\u003c\/strong\u003e Without support, a boat cover can sag in the middle and let rainwater pool on top, adding weight and promoting mildew. The 10795-4 forms a double ridgeline under the cover so water runs off instead of collecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this really extend the life of my boat cover?\u003c\/strong\u003e Attwood states the 10795-4 can extend a cover's life by as much as 50 percent by preventing water accumulation on top of the cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Attwood 10795-4?\u003c\/strong\u003e The system includes a telescoping aluminum center pole, a bow spreader, and 1-inch wide black poly web straps with non-marring stern hooks that together form the double-ridgeline support structure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions and weight of this product?\u003c\/strong\u003e The Attwood 10795-4 measures 11.5 x 28.25 x 6.25 inches and weighs 2.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this work with any boat cover?\u003c\/strong\u003e The 10795-4 is designed as a universal support system for boat covers on boats up to 19 feet, using straps and a center pole rather than cover-specific mounting points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the strap hardware damage the boat's gelcoat?\u003c\/strong\u003e No. The poly web straps on the 10795-4 use non-marring hooks at the stern attachment points, designed to avoid scratching or marring the boat's surface.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989663592667,"sku":"ATT-10795-4","price":41.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81-UGEd551L.jpg?v=1784486391"},{"product_id":"taylor-made-11703-internal-eye-end-fitting-7-8-black-plastic-bimini-top-hardware","title":"Taylor Made Products Eye End Internal Black 7\/8 Inch Bimini Top Hardware","description":"\u003cp\u003eThe Taylor Made Products Eye End Internal (part number 11703) is a black plastic internal eye end fitting sized for 7\/8 inch bimini top tubing. It fits inside the end of a bimini top tube or frame tube and provides a mounting eye for attaching straps, tie-downs, or other bimini top hardware. Made from black plastic, it is designed as a durable, corrosion-resistant fitting for marine canvas and bimini top frame systems, where metal hardware would be prone to rust. The internal design means it inserts directly into the tubing rather than clamping around the outside, giving a clean, low-profile finish at the tube end. This eye end is a simple, purpose-built replacement or upgrade part for boat owners maintaining or rebuilding bimini top frames, and it is sized specifically for 7\/8 inch diameter tubing, so it will not fit 3\/4 inch or 1 inch tube sizes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11703\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Internal Eye End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Fitment Size:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Bimini Top Hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011117038\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size tubing does the Taylor Made 11703 eye end fit?\u003c\/strong\u003e The Taylor Made 11703 eye end is sized for 7\/8 inch diameter tubing, matching the standard 7\/8 inch bimini top frame tube size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an internal or external eye end?\u003c\/strong\u003e Part number 11703 is an internal eye end, meaning it inserts inside the tube rather than clamping around the outside.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 11703 eye end?\u003c\/strong\u003e It is black. Taylor Made also offers the same 7\/8 inch internal eye end in white under a different part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Taylor Made 11703 made from?\u003c\/strong\u003e It is made from black plastic, chosen for corrosion resistance on bimini top and canvas hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 11703 eye end weigh?\u003c\/strong\u003e The Taylor Made 11703 eye end weighs 0.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this part used for?\u003c\/strong\u003e This eye end fits into the end of a bimini top or frame tube to provide a mounting point for straps, tie-downs, or other attachment hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 11703 fit 3\/4 inch bimini tubing?\u003c\/strong\u003e No, the 11703 is sized for 7\/8 inch tubing; a separate 3\/4 inch version is a different part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11703 eye end sold individually?\u003c\/strong\u003e Yes, the Taylor Made 11703 is a single internal eye end fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Taylor Made make a white version of this eye end?\u003c\/strong\u003e Yes, Taylor Made offers a 7\/8 inch internal eye end in white as a separate part number from the black 11703.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes part number 11703?\u003c\/strong\u003e Part number 11703 is manufactured by Taylor Made Products.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989666115803,"sku":"NAT-11703","price":3.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31aC5YwRzNL.jpg?v=1784486564"},{"product_id":"taylor-made-products-11705-external-eye-end-3-4-black-nylon-bimini-top-fitting-pair","title":"Taylor Made Products External Eye End, 3\/4 Inch Black Nylon, Non-Locking (Pair) - Part 11705","description":"\u003cp\u003eThe Taylor Made Products External Eye End (part 11705) is a 3\/4 inch black nylon eye end sold as a pair, designed for bimini top and canvas hardware applications. The eye end slides over the support pole and connects to a jaw slide or deck hinge, giving the top's fabric structure a secure, non-locking pivot point. Molded from corrosion-proof black nylon, it holds up to marine sun, salt spray, and moisture without rusting or degrading the way metal fittings can over time.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the eye end slides directly onto the 3\/4 inch diameter pole end, ready to connect to a compatible jaw slide or deck hinge. Mounting hardware is not included, and the deck hinge or jaw slide itself is sold separately. Each package contains two eye ends (one pair), matching the quantity needed for a typical bimini top installation. Because this is a non-locking design, it is intended for pole-and-hinge setups rather than applications requiring a locking eye end.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11705\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Type:\u003c\/strong\u003e Non-locking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2 (1 pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Package Dimensions:\u003c\/strong\u003e 6.3 x 2.24 x 1.97 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size pole does the Taylor Made 11705 eye end fit?\u003c\/strong\u003e The 11705 eye end is sized for a 3\/4 inch diameter pole, and it slides over the pole end to connect to a jaw slide or deck hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many eye ends come in a package of part 11705?\u003c\/strong\u003e Part 11705 is sold as a pair, with two black nylon eye ends included in each package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with the 11705 eye end?\u003c\/strong\u003e No, hardware is not included with the Taylor Made 11705 eye end; it is designed to slide onto the pole and connect to a jaw slide or deck hinge, both sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 11705 eye end made from?\u003c\/strong\u003e Black nylon is the material used for the Taylor Made 11705 eye end, chosen for its corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 11705 eye end lock in place?\u003c\/strong\u003e No, the 11705 is a non-locking eye end, meaning it pivots freely once connected to a jaw slide or deck hinge rather than locking into a fixed position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the eye end used for?\u003c\/strong\u003e The 11705 eye end connects a bimini top support pole to a jaw slide or deck hinge, forming part of the pivoting hardware that lets the top's frame fold and deploy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 11705 eye end pair weigh?\u003c\/strong\u003e The pair of Taylor Made 11705 eye ends weighs 0.06 pounds total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the deck hinge or jaw slide fit onto the 11705 eye end?\u003c\/strong\u003e The 11705 eye end is built to fit most deck hinges, though the specific deck hinge or jaw slide is a separate component and not included in the package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part 11705 available in?\u003c\/strong\u003e Part 11705 is black; Taylor Made also offers the same eye end style in white and in a 7\/8 inch size under different part numbers for buyers needing a different color or diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11705 eye end resistant to saltwater and sun exposure?\u003c\/strong\u003e Yes, the black nylon construction of the 11705 eye end is corrosion-proof, making it suitable for continued exposure to saltwater, moisture, and sun on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions for the 11705 eye end pair?\u003c\/strong\u003e The 11705 eye end pair ships in a package measuring 6.3 x 2.24 x 1.97 inches.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989666181339,"sku":"NAT-11705","price":4.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51fyf7GeHxL.jpg?v=1784486570"},{"product_id":"taylor-made-11707-external-eye-end-7-8-black-nylon-bimini-top-fitting-pair","title":"Taylor Made Products External Eye End 7\/8 Inch Black, Bimini Top Hardware (Pair) - 11707","description":"\u003cp\u003eThe Taylor Made Products External Eye End (11707) is a 7\/8 inch black nylon hardware piece used to connect bimini top poles to jaw slides or deck hinges. Sold as a pair, each eye end slides over the end of a bimini top pole and provides an attachment point that pivots at the jaw slide or deck hinge, allowing the top to fold and deploy smoothly. The nylon construction resists corrosion, making it suitable for continuous exposure to sun, salt water, and moisture without rusting or degrading like uncoated metal hardware. Installation is straightforward: the eye end slides over the pole end and is secured in place, requiring no special tools for a basic swap of worn or broken hardware. This eye end is sized for 7\/8 inch diameter bimini top poles and is intended to pair with a jaw slide or deck hinge, which are sold separately. It is a commonly needed replacement part for boat owners maintaining or repairing bimini top frames, and the black finish matches the black anodized or powder-coated poles and hardware used on most bimini top systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11707\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 (1 pair) per package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 6.3 x 2.95 x 1.57 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size bimini top pole does the Taylor Made 11707 eye end fit?\u003c\/strong\u003e The Taylor Made 11707 external eye end is sized for 7\/8 inch diameter bimini top poles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many eye ends come in a package of part number 11707?\u003c\/strong\u003e Two eye ends are included per package, sold as one pair, so both ends of a bimini top pole run can be fitted from a single package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the eye end made of?\u003c\/strong\u003e It is made of black nylon, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 11707 eye end include a jaw slide or deck hinge?\u003c\/strong\u003e No. The 11707 eye end slides over the pole and connects to a jaw slide or deck hinge, but those components are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 11707 eye end installed?\u003c\/strong\u003e Installation involves sliding the eye end over the end of the bimini top pole, a simple process that does not require special tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 11707 eye end available in?\u003c\/strong\u003e This part number is black. Taylor Made also offers a white version, the 7\/8 inch white eye end, as a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the Taylor Made 11707 eye end package?\u003c\/strong\u003e The package weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11707 eye end resistant to rust and corrosion?\u003c\/strong\u003e Yes, the black nylon construction of the 11707 eye end is corrosion-proof, making it suitable for continued exposure to sun and salt water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions for the 11707 eye end?\u003c\/strong\u003e The package measures 6.3 x 2.95 x 1.57 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11707 a locking or non-locking eye end?\u003c\/strong\u003e The 11707 is an external eye end that slides over the pole and connects to a jaw slide or deck hinge; it is not described as a locking mechanism.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989666377947,"sku":"NAT-11707","price":5.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/513a7fOyfML.jpg?v=1784486578"},{"product_id":"taylor-made-11751-7-8-ball-external-eye-end-316-stainless-steel-bimini-top-deck-fitting","title":"Taylor Made Products 7\/8 Inch Ball External Eye End, Stainless Steel Bimini Top Fitting, Part 11751","description":"\u003cp\u003eThe Taylor Made Products 11751 is a 7\/8 inch Ball External Eye End used to mount bimini top fittings to a boat's deck or gunwale. It uses a ball and socket design that offers greater rotation than a fixed eye end, letting the bimini top frame pivot and align smoothly as the top is raised, lowered, or adjusted. The fitting is made from marine grade 316 stainless steel with a polished finish, giving it strong resistance to saltwater corrosion and a clean, matched appearance alongside other stainless boat hardware.\u003c\/p\u003e\u003cp\u003eThis eye end is designed for horizontal mount applications and is built for quick and easy installation and removal, making it a practical choice when setting up a new bimini top support system or replacing a worn or damaged eye end on an existing one. The 7\/8 inch ball size is intended to pair with mating external eye end hardware of the same size. At 0.25 pounds, it is a compact, lightweight piece of deck hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11751\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Bimini Top Hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e 7\/8 Inch Ball External Eye End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 Stainless Steel, polished finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall Size:\u003c\/strong\u003e 7\/8 inch (0.88 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Horizontal mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 4.88 inches L x 1.5 inches H x 1.88 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Taiwan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011953650\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Products 11751 used for?\u003c\/strong\u003e It is a 7\/8 inch Ball External Eye End used to mount bimini top hardware to a boat, using a ball and socket design that allows greater rotation as the top is raised, lowered, or adjusted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the ball on part 11751?\u003c\/strong\u003e The ball measures 7\/8 inch (0.88 inches) in diameter, sized to mate with corresponding external eye end hardware of the same size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 11751 eye end made from?\u003c\/strong\u003e It is made from marine grade 316 stainless steel with a polished finish, chosen for resistance to saltwater corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11751 fitting designed for a specific mounting orientation?\u003c\/strong\u003e Yes, the Taylor Made Products 11751 is designed for horizontal mount applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 11751 ball external eye end weigh?\u003c\/strong\u003e It weighs 0.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions for part 11751?\u003c\/strong\u003e The Taylor Made Products 11751 ships in a package measuring 4.88 inches long by 1.5 inches high by 1.88 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of the 11751 eye end difficult?\u003c\/strong\u003e No, the ball and socket system on the 11751 is designed to allow quick and easy installation and removal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Taylor Made Products 11751 manufactured?\u003c\/strong\u003e Its country of origin is Taiwan.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the 11751 ball external eye end?\u003c\/strong\u003e The UPC for this Taylor Made Products part is 040011953650.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ball and socket design offer any advantage over a fixed eye end?\u003c\/strong\u003e Yes, the ball and socket design of the 11751 offers greater rotation than a fixed eye end, which helps the bimini top frame pivot and align as it is adjusted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 11751?\u003c\/strong\u003e The 11751 is supplied as a single 7\/8 inch Ball External Eye End fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11751 finish suitable for saltwater use?\u003c\/strong\u003e Yes, its 316 stainless steel construction with a polished finish is intended to hold up to saltwater exposure.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989666541787,"sku":"NAT-11751","price":49.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/nat-11751_lg__99454.1558175270.500.750.jpg?v=1785188623"},{"product_id":"taylor-made-11831-internal-eye-end-black-nylon-1-square-bimini-top-support-pole-fitting","title":"Taylor Made Products 1 Inch Square Internal Eye End, Black, Bimini Top Support Pole Hardware","description":"\u003cp\u003eThe Taylor Made Products 1\" square internal eye end (part number 11831) is a black nylon replacement fitting for bimini top support poles. It replaces a broken or missing eye end on a 1\" square support pole, restoring the connection between the pole and the jaw slide or deck hinge that anchors it to the boat. The eye end slides over the end of the support pole and is secured in place, then the eye itself bolts into the jaw slide or deck hinge to complete the connection.\u003c\/p\u003e\u003cp\u003eMolded from tough, corrosion-proof nylon, this eye end is built to withstand ongoing sun and saltwater exposure without breaking down. It is sold as a single piece, so buyers needing to replace more than one eye end should order accordingly. This is the internal eye end style, meaning it fits inside the pole rather than over the outside of it, and is intended specifically for 1\" square support poles rather than round poles.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11831\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Internal eye end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Shape:\u003c\/strong\u003e Square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Size:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Sold in single pieces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 inch square bimini top support poles\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made 11831 eye end used for?\u003c\/strong\u003e Part number 11831 is an internal eye end that connects a 1 inch square bimini top support pole to its jaw slide or deck hinge, replacing a broken or missing eye on the pole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size support pole does this eye end fit?\u003c\/strong\u003e The 11831 internal eye end is sized for a 1 inch square support pole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 11831?\u003c\/strong\u003e This eye end is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the eye end made from?\u003c\/strong\u003e It is made from nylon, chosen for its corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an internal or external eye end?\u003c\/strong\u003e The 11831 is an internal eye end, meaning it fits inside the support pole rather than over the outside of it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many eye ends come in one package?\u003c\/strong\u003e The Taylor Made 11831 is sold in single pieces, so each package contains one eye end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 11831 eye end attach to the pole?\u003c\/strong\u003e The eye end slides over the end of the 1 inch square support pole and is secured in place, then the eye is bolted into the jaw slide or deck hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 11831 come with mounting hardware?\u003c\/strong\u003e The listing covers the eye end itself; the jaw slide or deck hinge it connects to is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this part weigh?\u003c\/strong\u003e Part number 11831 weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11831 eye end resistant to sun and saltwater?\u003c\/strong\u003e Yes, its nylon construction is corrosion-proof and intended to hold up to ongoing marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a white version of this eye end available?\u003c\/strong\u003e Taylor Made offers this same internal eye end style in white as a separate part number; the 11831 is specifically the black version.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989666640091,"sku":"NAT-11831","price":3.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51IoHmtkVkL.jpg?v=1784486602"},{"product_id":"taylor-made-products-deck-hinge-side-mount-11721-black-nylon-bimini-top-hardware-pair","title":"Taylor Made Products Deck Hinge Side Mount Black Nylon, Part 11721 (Sold in Pairs)","description":"\u003cp\u003eThe Taylor Made Products Deck Hinge Side Mount, part number 11721, is a black nylon hinge fitting used to attach bimini top support arms to a vertical surface such as a boat's side wall or gunwale. Unlike a standard deck-mounted hinge that sits flat on a horizontal surface, this side mount version is designed to mount vertically, making it useful when deck space is limited or when the bimini frame needs to pivot from a side wall rather than the deck itself. It is sold as a pair, giving you both hinges needed for a typical bimini top mounting point on each side.\u003c\/p\u003e\u003cp\u003eThe hinge body is molded from black nylon, a durable, corrosion-resistant plastic well suited to marine environments where metal hardware would be prone to rust or salt corrosion. As a replacement part for Taylor Made bimini top systems, it is intended for boat owners repairing or upgrading existing bimini top hardware. Mounting hardware (screws or bolts) is not included, so installers will need to supply their own fasteners sized to the mounting holes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11721\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold in pairs (2 hinges)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Side mount, vertical mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5 x 2.09 x 1.69 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011117212\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made 11721 deck hinge used for?\u003c\/strong\u003e Part number 11721 is a side mount deck hinge used to attach a bimini top support arm to a vertical surface, such as a boat's side wall, rather than a flat deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hinges come in one package of 11721?\u003c\/strong\u003e The 11721 deck hinge is sold in pairs, so one package contains 2 hinges, enough for one mounting point on each side of a bimini top frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part 11721?\u003c\/strong\u003e It is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 11721 hinge made from?\u003c\/strong\u003e Nylon. This plastic construction resists corrosion in marine environments better than uncoated metal hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 11721 deck hinge include mounting screws?\u003c\/strong\u003e No, hardware is not included with the Taylor Made 11721 deck hinge, so you will need to provide your own screws or bolts sized for the mounting holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 11721 hinge be mounted on a horizontal deck surface?\u003c\/strong\u003e No, the 11721 is a side mount hinge designed to mount vertically on a side wall, not a flat deck surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the 11721 hinge pair?\u003c\/strong\u003e The Taylor Made 11721 deck hinge pair has package dimensions of 5 x 2.09 x 1.69 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a pair of 11721 deck hinges weigh?\u003c\/strong\u003e A pair of Taylor Made 11721 deck hinges weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11721 a genuine Taylor Made part?\u003c\/strong\u003e Yes, part number 11721 is manufactured by Taylor Made Products specifically as a replacement hinge for Taylor Made bimini top hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bimini top systems is the 11721 hinge compatible with?\u003c\/strong\u003e The 11721 side mount deck hinge is designed as a replacement part for Taylor Made bimini top systems.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989666672859,"sku":"NAT-11721","price":4.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51HOKT6kPSS_c815cd06-af7c-43b7-8cfb-2e97018dab70.jpg?v=1784486609"},{"product_id":"taylor-made-products-11717-black-nylon-deck-hinge-for-bimini-top-support-poles-set-of-2","title":"Taylor Made Products 11717 Black Nylon Deck Hinge, Fits.850 Track Slots, Sold in Pairs","description":"\u003cp\u003eThe Taylor Made Products 11717 is a black nylon deck hinge used as the mounting attachment point for a bimini top support pole on a boat's gunwale or deck. Each package is sold in pairs, giving you the two hinges needed for a complete installation. The hinge is molded from corrosion-resistant nylon, making it suitable for both freshwater and saltwater environments where metal hardware would otherwise be prone to rust or corrosion.\u003c\/p\u003e\u003cp\u003eEach hinge uses a 1-1\/4 inch long, 1\/4 inch diameter pin that is secured with a safety lanyard to prevent the pin from being lost during use or storage. The hinge is sized to fit.850 inch track slot openings, and it mounts with a face-mount design using a 1\/4 inch diameter bolt (mounting hardware is not included). At 2-1\/2 inches long, 7\/8 inch wide, and 1-1\/4 inches high, the 11717 is a compact, lightweight component designed to blend into the deck hardware of most boats. This part number is the black color option; the same hinge is also available in white under a separate part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11717\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Corrosion-resistant nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 2-1\/2 inches L x 7\/8 inch W x 1-1\/4 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Length:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Diameter:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack Slot Fit:\u003c\/strong\u003e.850 inch track slot openings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Bolt Diameter:\u003c\/strong\u003e 1\/4 inch (hardware not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Face mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold in pairs (2 hinges per package)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.15 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Products 11717 deck hinge used for?\u003c\/strong\u003e The 11717 deck hinge is the attachment point mounted on a boat's gunwale or deck to anchor a bimini top support pole in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this deck hinge?\u003c\/strong\u003e Each Taylor Made Products 11717 hinge measures 2-1\/2 inches long by 7\/8 inch wide by 1-1\/4 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 11717 hinge made from?\u003c\/strong\u003e Corrosion-resistant nylon, which is why the 11717 hinge holds up in both freshwater and saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hinges come in a package?\u003c\/strong\u003e Two. The 11717 is sold in pairs, so one package gives you a complete set of black nylon deck hinges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size pin does the 11717 hinge use?\u003c\/strong\u003e A 1-1\/4 inch long, 1\/4 inch diameter pin, secured with a safety lanyard so the pin cannot be lost during use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat track slot size does this hinge fit?\u003c\/strong\u003e.850 inch track slot openings is the fit for the 11717 deck hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with the 11717 deck hinge?\u003c\/strong\u003e No, mounting hardware is not included; you will need bolts sized to a 1\/4 inch diameter to install the 11717.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 11717 come in colors other than black?\u003c\/strong\u003e This part number, 11717, is the black version; the same hinge in white is sold under a different part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11717 a genuine Taylor Made Products part?\u003c\/strong\u003e Yes, part number 11717 is Taylor Made Products' own black nylon deck hinge rather than a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 11717 mount to the boat?\u003c\/strong\u003e It uses a face-mount design, bolting flat against the gunwale or deck surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 11717 deck hinge set weigh?\u003c\/strong\u003e The pair of 11717 hinges weighs 0.15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hinge hold up in saltwater?\u003c\/strong\u003e Yes, the nylon construction of the 11717 resists corrosion in both freshwater and saltwater conditions.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989666902235,"sku":"NAT-11717","price":6.34,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51HOKT6kPSS_b79aff0d-f264-4636-a47c-a036a66c9f1e.jpg?v=1784486620"},{"product_id":"taylor-made-products-11984-square-tube-bimini-support-poles-for-1-inch-square-tube-bimini-tops-pair","title":"Taylor Made Products 11984 Square-Tube Bimini Support Poles, Fits 1 Inch Square Tube Tops, Pair","description":"\u003cp\u003eThe Taylor Made Products 11984 Square-Tube Bimini Support Poles are replacement support poles designed for Bimini tops built with 1 inch square tubing. They are sold as a matched pair, so a single order provides both poles needed for a standard two-pole Bimini support setup. These poles are made in the USA and are built to work with square-tube Bimini frames rather than round-tube designs, so boat owners should confirm their existing Bimini top uses 1 inch square tubing before ordering.\u003c\/p\u003e\u003cp\u003eBimini support poles like the 11984 are used to hold the Bimini top canopy up and stable while underway or at anchor, keeping the fabric taut and the frame rigid against wind and movement on the water. Because they are dimensioned to match Taylor Made's square-tube Bimini top hardware, they are intended as a direct fit replacement or upgrade for existing square-tube systems rather than a universal, cut-to-fit accessory.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11984\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Square-Tube Bimini Support Poles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Compatibility:\u003c\/strong\u003e 1 inch square tube Bimini tops\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e Sold in pairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 49 x 3 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011119841\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Bimini Top Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size Bimini top tubing does the Taylor Made 11984 fit?\u003c\/strong\u003e The Taylor Made 11984 support poles are made for Bimini tops built with 1 inch square tube framing, not round tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many poles come in this listing?\u003c\/strong\u003e The 11984 is sold in pairs, so one order includes both support poles needed for a standard Bimini support setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the 11984 support poles?\u003c\/strong\u003e Packaged, the Taylor Made 11984 measures 49 x 3 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 11984 support pole set weigh?\u003c\/strong\u003e The pair weighs 2.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere are these Bimini support poles made?\u003c\/strong\u003e Taylor Made Products manufactures the 11984 Bimini support poles in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 11984 fit a round-tube Bimini top?\u003c\/strong\u003e No. The 11984 is designed specifically for 1 inch square tube Bimini tops and is not intended for round-tube frames.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for these support poles?\u003c\/strong\u003e The manufacturer part number is 11984, made by Taylor Made Products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made 11984?\u003c\/strong\u003e The UPC for the Taylor Made 11984 Bimini support poles is 040011119841.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of Bimini hardware does the 11984 fall under?\u003c\/strong\u003e The 11984 is classified as Bimini Top Hardware, specifically a square-tube support pole set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 11984 poles be used to replace worn or bent Bimini support poles?\u003c\/strong\u003e Yes, the 11984 pair is intended as a replacement or upgrade for existing 1 inch square tube Bimini support poles.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989666967771,"sku":"NAT-11984","price":53.16,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/nat-11984_lg__50474.1558139346.500.750.jpg?v=1785188516"},{"product_id":"taylor-made-11976-boat-cover-support-pole-base-pad-grey-epdm-non-slip-swivel-base-for-7-8-in-support-poles","title":"Taylor Made Products Boat Cover Support Pole Base Pad, Grey, Fits 7\/8 Inch Diameter Poles, Compatible with 11991 \u0026 11992","description":"\u003cp\u003eThis Taylor Made Products base pad replaces the traditional crutch tip on a boat cover support pole, giving the pole a stable, non-slip foundation on deck. It is built for use with any 7\/8 inch diameter support pole and swaps on in place of the pole's existing bottom tip. The pad is molded from EPDM, a rubber compound chosen for the added friction it provides against the deck surface, which helps keep the pole from sliding or walking out of position while the cover is up. Because EPDM distributes pressure evenly across the pad rather than concentrating it at a single point the way a crutch tip does, it reduces the risk of the pole denting or marking the deck under load.\u003c\/p\u003e\u003cp\u003eA built-in swivel head lets the pole pivot and settle at the angle needed to properly tension the cover, rather than forcing the pole to sit perfectly vertical. Installation is simple: remove the bottom tip currently on the support pole and insert the pole into the base pad's adapter to secure it. The pad is finished in grey to blend with most deck and cover colors. The support pole itself is sold separately; this listing is for the base pad only. The pad is compatible with Taylor Made Products support poles 11991 and 11992.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11976\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Boat cover support pole base pad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Pole Diameter:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Support Poles:\u003c\/strong\u003e Taylor Made Products 11991 and 11992\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Design:\u003c\/strong\u003e Swivel head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 22.01 x 1.5 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport Pole Included:\u003c\/strong\u003e No, sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e One base pad\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits any 7\/8 inch diameter support pole\u003c\/li\u003e\n\u003cli\u003eCompatible with Taylor Made Products support poles 11991 and 11992\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Products 11976 base pad used for?\u003c\/strong\u003e It replaces the crutch tip on a boat cover support pole, giving the pole a wider, non-slip base pad to rest against the deck instead of a single-point tip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat pole diameter does the 11976 base pad fit?\u003c\/strong\u003e The 11976 base pad fits any support pole with a 7\/8 inch diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 11976 base pad include the support pole?\u003c\/strong\u003e No, the support pole is sold separately. The 11976 listing is for the base pad only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Taylor Made Products support poles work with the 11976 base pad?\u003c\/strong\u003e The 11976 base pad is compatible with Taylor Made Products support poles 11991 and 11992.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 11976 base pad made of?\u003c\/strong\u003e It is molded from EPDM, a rubber compound that adds friction against the deck to help hold the pole in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 11976 base pad compare to a standard crutch tip?\u003c\/strong\u003e Unlike a crutch tip, which concentrates pressure at a single point, the 11976 base pad distributes pressure evenly across its EPDM surface, reducing the chance of deck marking and slipping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the pole angle be adjusted with the 11976 base pad installed?\u003c\/strong\u003e Yes, the 11976 base pad has a swivel head that lets the support pole settle at an angle rather than staying fixed vertical.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you install the 11976 base pad on a support pole?\u003c\/strong\u003e Remove the existing bottom tip from the support pole and insert the pole into the 11976 base pad's adapter to secure it in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 11976 base pad?\u003c\/strong\u003e The 11976 base pad is grey.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 11976 base pad?\u003c\/strong\u003e The 11976 base pad measures 22.01 x 1.5 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 11976 base pad weigh?\u003c\/strong\u003e It weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the 11976 base pad?\u003c\/strong\u003e One base pad is included; the support pole is not included and must be purchased separately.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989667131611,"sku":"NAT-11976","price":35.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/11976__24397.1722488201.500.750.jpg?v=1785188128"},{"product_id":"taylor-made-11992-adjustable-boat-cover-super-support-pole-36-to-64-aluminum-non-marring-tips","title":"Taylor Made Products Adjustable Boat Cover Support Pole, 36 to 64 Inches, Aluminum, Part 11992","description":"\u003cp\u003eThe Taylor Made Products Super Support Pole, part number 11992, is an adjustable aluminum pole that holds up the center of a boat cover so rain and debris cannot pool on top of it. Pooled water adds weight and strain to a cover and can lead to premature wear, sagging, and tears, so a properly placed support pole helps extend the life of the cover it is used with. This pole telescopes to fit boats needing support from 36 inches up to 64 inches in height, making it suitable for a wide range of boat sizes.\u003c\/p\u003e\u003cp\u003eThe pole functions as three support poles in one: it comes with a male canvas snap, a grommet tip, and a plain end cap, so it can be configured to attach directly to a cover's snap fitting, sit under a grommet, or simply stand free with a non-marring end cap. Each end of the pole is designed to be non-marring, protecting the boat's gelcoat, upholstery, or cover fabric from scuffs during use. Built from aluminum, the pole is lightweight yet sturdy enough to bear the load of a draped cover while resisting corrosion in a marine environment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11992\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Height Range:\u003c\/strong\u003e 36 inches to 64 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2.25 x 4 x 64 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Male canvas snap, grommet tip, and plain end cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011119926\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit; designed to work with most boat covers rather than a specific make or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat height range does the Taylor Made Products 11992 support pole cover?\u003c\/strong\u003e The 11992 support pole is adjustable from 36 inches up to 64 inches, letting it be set to the height needed to hold up the center of a boat cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this pole fit my specific boat cover?\u003c\/strong\u003e Yes, the 11992 support pole has a universal fit and is designed to work with most boat covers rather than one particular make or model, as long as the required support height falls within its 36 to 64 inch adjustable range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the support pole?\u003c\/strong\u003e Part number 11992 ships with a male canvas snap, a grommet tip, and a plain end cap, allowing the pole to be configured for a cover's snap fitting, a grommet opening, or free-standing use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the support pole made from?\u003c\/strong\u003e The 11992 pole is made from aluminum, giving it a lightweight build that resists corrosion in marine conditions while still supporting the weight of a draped boat cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I need a support pole under my boat cover?\u003c\/strong\u003e A center support pole like the 11992 keeps a boat cover raised so water cannot pool on top of it; pooled water adds strain and weight that can shorten the life of the cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the pole scratch my boat or cover?\u003c\/strong\u003e No, the 11992 support pole has non-marring tips on each end so it will not scratch or scuff the boat's surface or the cover fabric during use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I attach the pole to my cover?\u003c\/strong\u003e Depending on your cover's design, the 11992 pole can be set up with the included male canvas snap to attach to a snap fitting, the grommet tip to sit through a grommet, or the plain end cap for free-standing support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the support pole?\u003c\/strong\u003e The Taylor Made Products 11992 pole measures 2.25 x 4 x 64 inches and weighs 1.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pole made by Taylor Made Products?\u003c\/strong\u003e Yes, part number 11992 is manufactured by Taylor Made Products as part of their Super Support Pole lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this pole be used on larger boats?\u003c\/strong\u003e The 11992 pole extends up to 64 inches, making it suitable for larger boats that need a taller center support point for their cover.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989667229915,"sku":"NAT-11992","price":41.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/11992__80758.1722351411.500.750.jpg?v=1785188281"},{"product_id":"taylor-made-11989-fixed-bimini-support-poles-40-in-pair-with-deck-hinge-and-7-8-in-jaw-slides","title":"Taylor Made Products Fixed Bimini Support Poles 11989, 40 Inch, Pair, Silver","description":"\u003cp\u003eThe Taylor Made Products 11989 is a pair of fixed-length bimini support poles measuring 40 inches, designed to hold a bimini top up and out of the way instead of relying on rear support straps. Each pole is finished in silver and comes complete with two 7\/8 inch jaw slides and a deck hinge, giving boat owners everything needed to mount the poles and replace worn or missing rear straps on a bimini top frame. The poles are built from a combination of aluminum, fiberglass, and carbon fiber materials for a lightweight yet sturdy support structure that stands up to marine conditions.\u003c\/p\u003e\u003cp\u003eThese fixed poles are intended for the rear support position only; they should never be used to replace the front support straps on a bimini top. Because they are a fixed 40 inch length, there is no adjustment mechanism, and the boat owner should confirm this length matches the bimini top's rear strap span before ordering. With the jaw slides and deck hinge included, installation does not require sourcing separate mounting hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11989\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Fixed Bimini Support Poles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 40 inches (fixed, not adjustable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 poles (sold as a pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum, Carbon Fiber, Fiberglass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Two 7\/8 inch jaw slides and one deck hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011119896\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Bimini Top Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThese fixed support poles are intended for use on bimini top frames as a replacement for rear support straps; they are not intended to replace front support straps.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat length are the Taylor Made Products 11989 bimini support poles?\u003c\/strong\u003e Each pole in the Taylor Made Products 11989 set measures 40 inches, and the length is fixed rather than adjustable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many poles come in the 11989 set?\u003c\/strong\u003e The 11989 is sold as a pair, so two 40 inch fixed support poles are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 11989 poles be used on the front of a bimini top?\u003c\/strong\u003e No. The Taylor Made Products 11989 fixed support poles should never be used to replace the front support straps; only the rear straps should be replaced with support poles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is included with the 11989 poles?\u003c\/strong\u003e Two 7\/8 inch jaw slides and a deck hinge are included with the Taylor Made Products 11989, so no separate mounting hardware needs to be purchased for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the 11989 support poles made from?\u003c\/strong\u003e The Taylor Made Products 11989 poles are constructed from a combination of aluminum, carbon fiber, and fiberglass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 11989 bimini support pole set?\u003c\/strong\u003e The Taylor Made Products 11989 poles have a silver finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 11989 bimini support pole set weigh?\u003c\/strong\u003e The Taylor Made Products 11989 set weighs 1.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the 11989 poles adjustable?\u003c\/strong\u003e No, the 11989 is a fixed-length pole at 40 inches; it is not an adjustable support pole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the purpose of bimini support poles like the 11989?\u003c\/strong\u003e Support poles such as the Taylor Made Products 11989 are used instead of rear support straps to hold a bimini top up and out of the way.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made Products 11989?\u003c\/strong\u003e The UPC for the Taylor Made Products 11989 fixed bimini support poles is 040011119896.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989667328219,"sku":"NAT-11989","price":61.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/nat-11989_lg__28985.1558139396.500.750.jpg?v=1785188055"},{"product_id":"taylor-made-11995-adjustable-bimini-support-poles-pair-28-to-48-aluminum-with-deck-hinge-and-jaw-slides","title":"Taylor Made Products Adjustable Bimini Support Poles, 28 to 48 Inches, Aluminum, Pair, Part 11995","description":"\u003cp\u003eThe Taylor Made Products adjustable bimini support poles (part number 11995) are a sold-in-pairs replacement pole set designed to hold a boat's bimini top up and out of the way. Each pole telescopes and locks anywhere from 28 inches to 48 inches, letting you match the pole length to your bimini top's mounting points instead of being locked into one fixed size. The poles are made of aluminum, which is rustproof and corrosion-resistant, so they hold up to repeated exposure in both saltwater and freshwater environments.\u003c\/p\u003e\u003cp\u003eEach pole is fitted with a male snap end that fits into the female snap on the bimini's support pad, and a rubber end cap on the opposite end grips the boat floor to keep the pole from sliding or marking the deck. The set includes 7\/8 inch jaw slides and a deck hinge so the poles can be mounted and adjusted at the boat's structure. These poles are intended to replace only the rear support straps on a bimini top; they should never be used in place of the front support straps. Do not exceed 35 miles per hour while the adjustable bimini top support poles are in use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11995\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Length Range:\u003c\/strong\u003e 28 inches to 48 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold in pairs (2 poles)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2.25 x 4 x 48 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011119957\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Support poles with jaw slides and deck hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Speed Rating:\u003c\/strong\u003e 35 miles per hour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat length range do these bimini poles adjust to?\u003c\/strong\u003e The Taylor Made Products adjustable bimini support poles, part number 11995, extend from 28 inches to 48 inches, covering a wide range of bimini top mounting heights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many poles are included?\u003c\/strong\u003e Part number 11995 is sold in pairs, so two adjustable poles come in each set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the poles made from?\u003c\/strong\u003e These poles are made of aluminum, which is rustproof and corrosion-resistant for use in both saltwater and freshwater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a speed limit while using these poles?\u003c\/strong\u003e Yes. Do not exceed 35 miles per hour while using the adjustable bimini top support poles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware comes with the poles?\u003c\/strong\u003e The 11995 set includes 7\/8 inch jaw slides and a deck hinge along with the two support poles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan these poles replace the front bimini support straps?\u003c\/strong\u003e No. These poles should never be used to replace the front support straps on a bimini top; only the rear straps should be replaced with adjustable support poles like the 11995.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the poles?\u003c\/strong\u003e The Taylor Made Products 11995 adjustable bimini support poles are black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do the poles connect to the bimini top?\u003c\/strong\u003e Each pole has a male snap end that fits into the female snap on the bimini top's support pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do the poles stay in place on the boat floor?\u003c\/strong\u003e A rubber end cap on each pole grips the boat floor to keep the 11995 support poles from sliding during use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the pair weigh?\u003c\/strong\u003e The pair of Taylor Made Products adjustable bimini support poles, part number 11995, weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between these adjustable poles and fixed bimini poles?\u003c\/strong\u003e Unlike a fixed-length bimini support pole, the 11995 adjustable poles telescope and lock anywhere from 28 inches to 48 inches, giving a range of usable heights instead of one set length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these poles suitable for saltwater use?\u003c\/strong\u003e Yes, the aluminum construction of the 11995 adjustable bimini support poles is durable and withstands both saltwater and freshwater conditions.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989667360987,"sku":"NAT-11995","price":92.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/11995__28211.1722514491.500.750.jpg?v=1785189002"},{"product_id":"taylor-made-1204-chrome-deck-hinge-for-bimini-top-mounting-chromed-zamak-2-per-card","title":"Taylor Made Deck Hinge 1204, Chromed Zamak, Sold in Pairs","description":"\u003cp\u003eThe Taylor Made deck hinge, part number 1204, is a chromed Zamak fitting used to secure bimini top frame legs to the deck. It is designed to mount horizontally, making it suited to installations where the bimini top leg meets the deck at a low angle rather than straight down. The hinge is sold two per package, matching the typical need for a pair of deck-side mounting points on a bimini top frame.\u003c\/p\u003e\u003cp\u003eZamak is a zinc alloy commonly used for marine hardware castings because it holds a chrome finish well and resists the corrosion that boat deck hardware is exposed to. The chromed finish gives the hinge a bright, finished look that matches other chromed bimini top fittings. Because the hinge is a hardware fitting rather than an electronic or size-specific component, it works with bimini top frame legs sized to accept a standard horizontal-mount deck hinge rather than being tied to a single boat make or model.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1204\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chromed Zamak\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Orientation:\u003c\/strong\u003e Horizontal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Sold in pairs (2 per package)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4.88 x 2.95 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 4.7 x 4.5 x 4.4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.39 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011112040\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Bimini Top Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Taylor Made deck hinge 1204 used for?\u003c\/strong\u003e Taylor Made part 1204 is a deck hinge used to mount a bimini top frame leg to the boat deck, allowing the leg to pivot at the deck-side connection point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many deck hinges come in a package?\u003c\/strong\u003e Deck hinge 1204 is sold in pairs, with two hinges included per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1204 deck hinge mount horizontally or vertically?\u003c\/strong\u003e It is designed to mount horizontally, which suits bimini top legs that meet the deck at a low angle rather than straight up and down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Taylor Made 1204 deck hinge made from?\u003c\/strong\u003e It is made from Zamak, a zinc alloy, finished with a chrome plating for corrosion resistance and appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 1204 deck hinge?\u003c\/strong\u003e Each Taylor Made 1204 deck hinge measures 4.88 x 2.95 x 1.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1204 deck hinge weigh?\u003c\/strong\u003e The Taylor Made 1204 deck hinge weighs 0.39 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1204 hinge genuine Taylor Made hardware?\u003c\/strong\u003e Yes, part 1204 is genuine Taylor Made bimini top hardware, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 1204 deck hinge have?\u003c\/strong\u003e The 1204 deck hinge has a chrome finish over the Zamak alloy body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 1204 deck hinge be used with any bimini top frame?\u003c\/strong\u003e Deck hinge 1204 fits bimini top frame legs sized for a standard horizontal-mount deck hinge; it is not tied to a specific boat make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 1204 deck hinge?\u003c\/strong\u003e An order of Taylor Made 1204 includes two chromed Zamak deck hinges, sold as a pair per package.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989667459291,"sku":"NAT-1204","price":14.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/nat-1204_lg__21625.1722364890.500.750.jpg?v=1785188543"},{"product_id":"taylor-made-11991-adjustable-boat-cover-support-pole-36-to-64-aluminum-with-snap-crutch-tip","title":"Taylor Made Products Adjustable Boat Cover Support Pole 11991, Aluminum, 36 Inches to 64 Inches","description":"\u003cp\u003eThe Taylor Made Products 11991 is an adjustable aluminum support pole built to hold a boat cover up off the deck so water does not pool and collect on top of the boat. The pole extends from 36 inches to 64 inches, so one pole covers a wide range of boat sizes and cover heights, and it breaks down into a collapsing 3-piece design that stores at just 22 inches for easy stowing when not in use. An adjuster lets the owner dial in the exact height needed for a given cover.\u003c\/p\u003e\u003cp\u003eAt the base, the pole uses a crutch tip with an EPDM bottom pad instead of a traditional crutch tip design. The EPDM material grips the deck with additional friction to keep the pole from sliding or shifting, and the base pad has a built-in swivel so the pole can be angled to match the slope of the cover rather than sitting straight up and down. The base is designed to work with any 7\/8 inch diameter (bottom pole) support pole, so the existing bottom tip can be removed and this base inserted in its place. The pole itself is aluminum, which resists rust and corrosion in both saltwater and freshwater use. The set includes the support pole with its snap and crutch tip attached, ready to mount under a compatible boat cover.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11991\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Length:\u003c\/strong\u003e 36 inches to 64 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollapsed Storage Length:\u003c\/strong\u003e 22 inches (3-piece pole)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Pole Diameter Compatibility:\u003c\/strong\u003e 7\/8 inch diameter (bottom pole) support poles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Pad Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Feature:\u003c\/strong\u003e Swivel base pad for angle adjustment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2.25 x 4 x 64 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Snap and crutch tip, support pole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltraviolet Light Protection:\u003c\/strong\u003e No UV protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011119919\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal fit for boat covers using a 7\/8 inch diameter (bottom pole) support pole base\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat length range does this support pole adjust to?\u003c\/strong\u003e The Taylor Made Products 11991 support pole adjusts from 36 inches to 64 inches, with an adjuster to set the correct height for your cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow small does it collapse for storage?\u003c\/strong\u003e It breaks down into a 3-piece pole that collapses to 22 inches for easier storage when the boat cover is off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the support pole made of?\u003c\/strong\u003e The 11991 pole is made of aluminum, which is rustproof and corrosion-resistant in both saltwater and freshwater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 11991 support pole?\u003c\/strong\u003e It is finished in silver.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with part number 11991?\u003c\/strong\u003e The package includes the adjustable support pole along with its snap and crutch tip attached at the base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size support pole does the base fit?\u003c\/strong\u003e The base on the 11991 is designed for use with all 7\/8 inch diameter (bottom pole) support poles, so the existing bottom tip on a compatible pole can be swapped for this base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this pole use an EPDM base pad instead of a standard crutch tip?\u003c\/strong\u003e The EPDM bottom pad on the 11991 provides additional friction to hold the pole in place against the deck, versus the traditional crutch tip design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the base angle be adjusted to match my cover's slope?\u003c\/strong\u003e Yes, the base pad on the 11991 has a swivel capability that lets the pole be positioned at the right angle for your application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 11991 support pole weigh?\u003c\/strong\u003e The Taylor Made Products 11991 weighs 1.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the pole?\u003c\/strong\u003e Item dimensions for the 11991 are 2.25 x 4 x 64 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11991 a universal fit pole?\u003c\/strong\u003e Yes, it is a universal fit support pole intended to work with compatible boat covers rather than one specific boat model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Taylor Made Products 11991 support pole carries UPC 040011119919.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989667590363,"sku":"NAT-11991","price":37.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/11991__62853.1722507326.500.750.jpg?v=1785188676"},{"product_id":"taylor-made-products-1205-deck-hinge-side-mount-for-bimini-tops-chromed-zamak-sold-in-pairs","title":"Taylor Made Products Deck Hinge Side Mount, Chromed Zamak, Sold in Pairs","description":"\u003cp\u003eThe Taylor Made Products Deck Hinge Side Mount (part number 1205) is a replacement mounting hinge for bimini top support poles, sold as a pair for outfitting both sides of the top. Each hinge is cast from chromed zamak, a zinc alloy blended with magnesium, aluminum, and copper, giving the hardware a bright silver finish and strong corrosion resistance for saltwater and freshwater environments alike. The hinge mounts flat to the boat sidewall using a face-mount design, and the included bolts secure the support pole eye end directly to the hinge body, allowing the bimini top pole to pivot smoothly for raising, lowering, and folding.\u003c\/p\u003e\u003cp\u003eThis deck hinge is intended as a direct replacement when an existing bimini top hinge is broken, worn, or has failed, restoring proper pole articulation without replacing the entire top or frame. Installation is straightforward: mount the hinge to the sidewall with fasteners, then attach the support pole eye end using the supplied hardware. Taylor Made Products manufactures this hinge in the USA and backs it with the fit and finish boaters expect from a purpose-built marine hardware supplier.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chromed zamak, zinc, magnesium, aluminium and copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unfinished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Face Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Location:\u003c\/strong\u003e Boat sidewall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2 (sold in pairs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011112057\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Products Deck Hinge Side Mount used for?\u003c\/strong\u003e It is a replacement mounting hinge that attaches a bimini top support pole to the boat sidewall, letting the pole pivot to raise, lower, or fold the top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hinges come in part number 1205?\u003c\/strong\u003e Part number 1205 is sold in pairs, so two deck hinges are included in each package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the deck hinge made from?\u003c\/strong\u003e Each hinge is cast from chromed zamak, a zinc alloy combined with magnesium, aluminum, and copper, which gives it a silver chrome finish and corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hinge corrosion-resistant for marine use?\u003c\/strong\u003e Yes, the chromed zamak construction of the Taylor Made 1205 deck hinge resists corrosion from saltwater and freshwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the deck hinge mount to the boat?\u003c\/strong\u003e It uses a face-mount design and is installed flat against the boat sidewall with bolts, and the included bolts also secure the bimini top support pole eye end to the hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1205 deck hinge include mounting hardware?\u003c\/strong\u003e Yes, the bolts needed to secure the support pole eye end to the hinge are included with the Taylor Made Products deck hinge side mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this to replace a broken or worn bimini top hinge?\u003c\/strong\u003e Yes, part number 1205 is designed as a replacement for a broken or worn deck hinge on a bimini top, restoring normal pole movement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Taylor Made 1205 deck hinge manufactured?\u003c\/strong\u003e Taylor Made Products manufactures the 1205 deck hinge side mount in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does this hinge have?\u003c\/strong\u003e The hinge has a silver, unfinished chrome-plated appearance from its chromed zamak casting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the deck hinge weigh?\u003c\/strong\u003e Each package of the Taylor Made Products deck hinge side mount weighs 0.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation difficult for this deck hinge?\u003c\/strong\u003e No, installation is straightforward: mount the hinge to the sidewall, then attach the bimini top support pole eye end using the included bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1205 hinge genuine Taylor Made Products hardware?\u003c\/strong\u003e Yes, part number 1205 is a genuine Taylor Made Products deck hinge, not a generic aftermarket substitute.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989667623131,"sku":"NAT-1205","price":15.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/nat-1205_lg__74135.1558116319.500.750.jpg?v=1785188192"},{"product_id":"taylor-made-1203-bimini-top-external-eye-end-3-4-chromed-zamak-1-pair","title":"Taylor Made 1203 Bimini Top External Eye End, 3\/4 Inch Chromed Zamak, 1 Pair","description":"\u003cp\u003eThe Taylor Made 1203 external eye end is a replacement fitting for bimini top support poles measuring 3\/4 inch in diameter. It is designed to connect a support pole to a jaw slide or deck hinge, giving you a way to restore a bimini top frame when the original eye end is broken, lost, or corroded. The eye end mounts vertically on the side walls of the pole and is built from chromed zamak, an alloy of zinc, magnesium, aluminum, and copper that resists corrosion in the marine environment while providing a durable, bright chrome finish.\u003c\/p\u003e\u003cp\u003eThis part is sold as one pair, matching the two support poles typically found on a bimini top frame, and installs by sliding the eye end base over the end of the pole. It is intended for boaters replacing damaged bimini hardware or building out a support pole assembly where an eye connection to a jaw slide or deck hinge is needed. The jaw slide or deck hinge itself is not included with this part.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1203\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chromed Zamak\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold in pairs (1 pair per package)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Mounts vertically on side walls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.19 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits bimini top support poles measuring 3\/4 inch in diameter\u003c\/li\u003e\n\u003cli\u003eConnects to a jaw slide or deck hinge (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size support pole does the Taylor Made 1203 eye end fit?\u003c\/strong\u003e The Taylor Made 1203 external eye end fits bimini top support poles that are 3\/4 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many eye ends come in part number 1203?\u003c\/strong\u003e Part 1203 is sold in pairs, so one package includes 2 external eye ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Taylor Made 1203 eye end made from?\u003c\/strong\u003e It is made from chromed zamak, an alloy of zinc, magnesium, aluminum, and copper that resists corrosion in marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1203 eye end include the jaw slide or deck hinge?\u003c\/strong\u003e No, the jaw slide and deck hinge are not included with the Taylor Made 1203 eye end; only the eye end itself is provided.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 1203 eye end installed on a bimini pole?\u003c\/strong\u003e The eye end base slides over the end of the 3\/4 inch support pole and mounts vertically on the side walls of the pole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made 1203 weigh?\u003c\/strong\u003e The Taylor Made 1203 pair weighs 0.19 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does part 1203 have?\u003c\/strong\u003e Part 1203 has a chrome finish over the zamak base material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a version of this eye end for a larger pole size?\u003c\/strong\u003e Yes, Taylor Made offers part number 11206 as the 7\/8 inch chromed zamak eye end, sold separately as its own pair for the larger pole diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 1203 eye end be used to repair a broken bimini top pole fitting?\u003c\/strong\u003e Yes, the 1203 is intended as a replacement for a broken, lost, or corroded external eye end on a 3\/4 inch bimini top support pole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1203 eye end genuine Taylor Made hardware?\u003c\/strong\u003e Yes, part number 1203 is a genuine Taylor Made external eye end, not an aftermarket copy.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989667655899,"sku":"NAT-1203","price":13.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/617WNY03nuL.jpg?v=1784486664"},{"product_id":"taylor-made-products-top-lok-7-8-stainless-steel-windshield-snap-fastener-mpn-1344-4-pack","title":"Taylor Made Products Top-Lok Stainless Steel Snap Fastener, 7\/8 Inch, 4-Pack","description":"\u003cp\u003eThe Taylor Made Products Top-Lok is a stainless steel snap fastener sized for 7\/8 inch, heavy 1 inch round trim. It comes with the stud portion already affixed, so it is ready to snap directly onto the windshield frame without a separate attachment step. Each pack contains 4 fasteners, giving you enough to outfit a full run of trim points along a windshield or cover edge in one purchase.\u003c\/p\u003e\u003cp\u003eBuilt in stainless steel, this fastener resists corrosion in the marine environment while holding up to repeated snapping and unsnapping as covers or trim pieces are removed and reinstalled. It is designed specifically for heavy 1 inch round trim, making it a match for boats using that trim profile rather than lighter or narrower trim styles. Taylor Made offers a companion version, part number 1348, sized for 3\/4 inch trim, so boat owners should confirm their trim diameter before ordering to get the correct size.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1344\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 4 per pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Portion:\u003c\/strong\u003e Affixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 4.88 x 1.94 x 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011113443\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size trim does the Taylor Made 1344 fit?\u003c\/strong\u003e The Taylor Made Products Top-Lok 1344 is sized for 7\/8 inch, heavy 1 inch round trim.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fasteners come in the 1344 pack?\u003c\/strong\u003e This pack contains 4 stainless steel Top-Lok fasteners, part number 1344.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the stud already attached, or do I need to install it separately?\u003c\/strong\u003e Yes, the 1344 comes with the stud portion affixed, so it is ready to snap onto the windshield frame without additional assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 1344 fastener made from?\u003c\/strong\u003e It is made from stainless steel, chosen for corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this fastener meant to be used?\u003c\/strong\u003e The Taylor Made 1344 snaps onto the windshield frame to secure heavy 1 inch round trim.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 1344 package?\u003c\/strong\u003e The 1344 pack measures 4.88 x 1.94 x 0.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1344 fastener pack weigh?\u003c\/strong\u003e The Taylor Made 1344 4-pack weighs 0.03 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between part 1344 and part 1348?\u003c\/strong\u003e Part 1344 is sized for 7\/8 inch trim, while part 1348 is the same Top-Lok style fastener sized for 3\/4 inch trim; choose based on your trim diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 1344 fastener work with 3\/4 inch trim?\u003c\/strong\u003e No, the 1344 is sized for 7\/8 inch trim; for 3\/4 inch trim, Taylor Made Products offers part number 1348 instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Taylor Made Products part?\u003c\/strong\u003e Yes, part number 1344 is a genuine Taylor Made Products Top-Lok stainless steel snap fastener.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989667852507,"sku":"NAT-1344","price":11.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41gzPRuge2L.jpg?v=1784486686"},{"product_id":"taylor-made-top-lok-stainless-steel-snaps-for-3-4-windshield-trim-mpn-1348-4-pack","title":"Taylor Made Products Top-Lok Stainless Steel Snaps for 3\/4 Inch Trim, 4-Pack (1348)","description":"\u003cp\u003eThe Taylor Made Products Top-Lok stainless steel snap set (part number 1348) secures a boat cockpit cover or bow cover to the windshield trim on boats fitted with 3\/4 inch trim. Each snap has the stud portion affixed, so it is ready to fasten directly to the mating cover snap without additional assembly. The snaps are made from stainless steel, giving them the corrosion resistance needed to hold up in both freshwater and saltwater marine environments. This listing is for a pack of 4 snaps, sized to fit 0.75 inch trim.\u003c\/p\u003e\u003cp\u003eUse these Top-Lok snaps anywhere a cover needs to be attached to a boat's windshield trim, such as securing a cockpit cover or a bow cover in place while the boat is docked or in storage. The stainless steel construction and grey finish are built to withstand ongoing sun, salt, and moisture exposure without corroding or discoloring like lower-grade fasteners can. Because the stud portion is already affixed, installation is a straightforward matter of aligning the snap to the trim and mating it with the corresponding cover snap.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1348\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Trim Size:\u003c\/strong\u003e 3\/4 inch (0.75 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4.88 x 1.94 x 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 4 per pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e Snap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Portion:\u003c\/strong\u003e Affixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011113481\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size trim does part number 1348 fit?\u003c\/strong\u003e Taylor Made Products snap 1348 is sized for 3\/4 inch (0.75 inch) boat trim.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many snaps come in this pack?\u003c\/strong\u003e This pack contains 4 Top-Lok snaps, part number 1348.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the stud already attached to the snap?\u003c\/strong\u003e Yes, the stud portion is affixed on part number 1348, so no separate assembly is needed before installing it on the trim.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are these snaps made from?\u003c\/strong\u003e Part number 1348 is made from stainless steel for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill these snaps hold up in saltwater?\u003c\/strong\u003e The stainless steel construction of the 1348 snap is built to withstand both freshwater and saltwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the Top-Lok snaps?\u003c\/strong\u003e Part number 1348 has a grey finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of each snap?\u003c\/strong\u003e Each 1348 snap measures 4.88 x 1.94 x 0.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this snap used for?\u003c\/strong\u003e The 1348 Top-Lok snap is used to secure a boat cockpit cover or bow cover to the boat's windshield trim.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a version for a different trim size?\u003c\/strong\u003e Taylor Made Products also offers part number 1344 for 7\/8 inch trim, sold separately in a 4 per pack quantity, if 3\/4 inch trim (part number 1348) is not the correct size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 4-pack weigh?\u003c\/strong\u003e The 1348 snap pack weighs 0.03 pounds.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989667885275,"sku":"NAT-1348","price":10.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71RazRLyMSL.jpg?v=1784486688"},{"product_id":"taylor-made-16401-snap-pull-dot-female-fastener-4-sets-attaches-to-cloth-boat-cover-snap","title":"Taylor Made Products Snap Fastener 16401 - Female Pull Dot, Attaches to Cloth, 4-Pack","description":"\u003cp\u003eThe Taylor Made Products 16401 is a female snap pull dot fastener designed to attach directly to cloth, making it a practical replacement or repair component for boat covers, canvas tops, biminis, and other fabric marine coverings that use snap-style closures. Each pack contains 4 sets of the female fastener half, ready to be paired with a matching male snap component to complete a secure, weather-resistant closure point.\u003c\/p\u003e\u003cp\u003eConstructed from stainless steel, the 16401 is built to hold up against the corrosive marine environment, resisting rust and salt exposure over repeated use. The fastener uses a one-way locking spot design: pressing down on the spot locks the snap in place, while lifting up on the spot releases it, giving extra holding power that resists accidental release from wind or movement while still allowing an intentional, controlled release when needed.\u003c\/p\u003e\u003cp\u003eThis is the female half of the snap set only. A compatible male fastener component is required on the opposite side of the fabric or mounting surface to form a complete, working snap connection.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 16401\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e Female snap pull dot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment Method:\u003c\/strong\u003e Attaches to cloth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 sets (4-pack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 4.5 x 1.6 x 0.7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat cover snaps and fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in a pack of the Taylor Made Products 16401 snap fastener?\u003c\/strong\u003e Each pack of the Taylor Made Products 16401 contains 4 sets of female snap fasteners designed to attach to cloth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 16401 a male or female fastener?\u003c\/strong\u003e The 16401 is a female fastener that pairs with a corresponding male snap component to secure boat covers and canvas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 16401 snap fastener made from?\u003c\/strong\u003e The 16401 female snap pull dot fastener is made from stainless steel for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the snap fastener attach to fabric?\u003c\/strong\u003e The Taylor Made Products 16401 attaches directly to cloth, making it suitable for boat covers, canvas tops, and other fabric applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the 16401 fastener set?\u003c\/strong\u003e The 16401 four-pack ships in a package measuring 4.5 x 1.6 x 0.7 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 16401 fastener pack weigh?\u003c\/strong\u003e The 16401 four-pack of female snap fasteners weighs 0.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 16401 snap fastener?\u003c\/strong\u003e Silver is the finish of the Taylor Made Products 16401 female snap pull dot fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a matching male fastener to use the 16401?\u003c\/strong\u003e Yes, the 16401 female fastener is designed to be used with a compatible male snap fastener component to complete the connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the snap-lock mechanism work on this fastener?\u003c\/strong\u003e Pushing down on the spot locks the Taylor Made Products 16401 snap in place, and lifting up on the spot releases it, holding securely in one direction only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fasteners come in one order of the 16401?\u003c\/strong\u003e One order of the 16401 includes 4 sets of female snap fasteners that attach to cloth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 16401 fastener a genuine Taylor Made Products part?\u003c\/strong\u003e Yes, the 16401 is a genuine Taylor Made Products component, commonly used to replace worn or missing female snap fasteners on boat covers and canvas.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989668507867,"sku":"NAT-16401","price":9.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/nat-16401_lg__06745.1558116650.500.750.jpg?v=1785188962"},{"product_id":"sureshade-power-bimini-sport-arm-kit-36-black-taylor-made-products-2020134628","title":"Taylor Made Products SureShade Power Bimini Sport Arm Kit, 36 Inch, Black","description":"\u003cp\u003eThe Taylor Made Products SureShade Power Bimini Sport Arm Kit is a 36 inch support arm kit finished in black, designed for use with SureShade power bimini top systems. It falls within the support poles and systems category, providing the structural arm component needed to mount and operate a power bimini setup on a boat. The kit weighs 1.88 pounds, making it a lightweight addition to a bimini top assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2020134628\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Support Poles \u0026amp; Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.88 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Products Power Bimini Sport Arm Kit used for?\u003c\/strong\u003e It is a support arm kit for a power bimini top system, providing the structural arm needed to mount and operate the bimini, part number 2020134628.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this arm kit?\u003c\/strong\u003e The Power Bimini Sport Arm Kit, part number 2020134628, measures 36 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the arm kit come in?\u003c\/strong\u003e This kit is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the arm kit weigh?\u003c\/strong\u003e The Taylor Made Products Power Bimini Sport Arm Kit weighs 1.88 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Taylor Made Products part?\u003c\/strong\u003e Yes, part number 2020134628 is a genuine Taylor Made Products component, not an aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product category does this arm kit belong to?\u003c\/strong\u003e It is listed under Support Poles \u0026amp; Systems, reflecting its role as a structural component for bimini top support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this arm kit specific to the Power Bimini Sport line?\u003c\/strong\u003e Yes, the kit, part number 2020134628, is designated for the Power Bimini Sport arm application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 36 inch measurement refer to the arm length?\u003c\/strong\u003e Yes, 36 inches is the stated length of this Power Bimini Sport Arm Kit.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989668802779,"sku":"NAT-2020134628","price":244.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_e74d77b6-d326-45f5-87c1-64fae3a7cf7d.jpg?v=1785351793"},{"product_id":"taylor-made-products-16402-snap-pull-dot-male-fastener-stainless-steel-wood-screw-snap-4-sets","title":"Taylor Made Products Male Snap Fastener on Wood Screw, Stainless Steel, 4-Pack (Part 16402)","description":"\u003cp\u003eThe Taylor Made Products 16402 is a male snap fastener mounted on a wood screw, sold in a set of 4. It is designed to secure boat covers, canvas, and cushions to wood surfaces using a reliable one-way locking action: push down on the snap to lock it in place, then lift or pull in the direction of the snap to release it. This directional release helps the fastener hold securely under wind and movement while still allowing for quick, controlled removal when needed.\u003c\/p\u003e\u003cp\u003eEach fastener is constructed from stainless steel in a Grade 2 hardness with a round head style and an unfinished, silver stainless finish, giving it corrosion resistance suited to marine environments. The fastener uses Unified National Coarse (UNC) threading with a right-hand, Class 1A thread and a Type TT screw point, and is compatible with a groove diameter of 0.16 inches. Each unit measures 1 x 1 x 1 inches and weighs 0.03 pounds.\u003c\/p\u003e\u003cp\u003eBecause the fastener is mounted on a wood screw, it is intended for attachment directly into wood surfaces such as boat trim, transoms, or wood-backed hardware points. It pairs with a compatible female snap component (sold separately) to complete a full snap closure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 16402\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Cover Snaps and Fasteners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e Male Snap Fastener with Wood Screw Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 sets (4 pack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Grade 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unfinished Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e Unified National Coarse (UNC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Style:\u003c\/strong\u003e Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Class:\u003c\/strong\u003e 1A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Point Style:\u003c\/strong\u003e Type TT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Groove Diameter:\u003c\/strong\u003e 0.16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 0.164 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1 x 1 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011347022\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Products 16402 used for?\u003c\/strong\u003e The 16402 is a male snap fastener mounted on a wood screw, used to attach boat covers, canvas, or cushions to a wood surface such as a transom or trim piece.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fasteners come in part number 16402?\u003c\/strong\u003e Part 16402 is sold as a set of 4 male fasteners on wood screws (4 sets per pack).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 16402 snap fastener made from?\u003c\/strong\u003e It is made from Grade 2 stainless steel with an unfinished, silver finish for corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the one-way snap locking action work?\u003c\/strong\u003e Push down on the fastener to lock it in place; it releases only when lifted or pulled in the direction of the snap, which helps it hold securely under wind and movement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the 16402?\u003c\/strong\u003e Each Taylor Made Products 16402 fastener measures 1 x 1 x 1 inches and weighs 0.03 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type does the 16402 use?\u003c\/strong\u003e The 16402 uses Unified National Coarse (UNC) threading with a right-hand, Class 1A thread and a Type TT screw point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat groove diameter is the 16402 compatible with?\u003c\/strong\u003e The fastener is compatible with a groove diameter of 0.16 inches, with an overall fastener size of 0.164 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 16402 mount directly into wood?\u003c\/strong\u003e Yes, the 16402 is a male fastener on a wood screw, so it is designed to be driven directly into a wood surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does the 16402 have?\u003c\/strong\u003e It has an unfinished stainless steel finish that appears silver in color.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989668966619,"sku":"NAT-16402","price":6.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/nat-16402_lg__63989.1558116711.500.750.jpg?v=1785188418"},{"product_id":"sureshade-power-bimini-sport-arm-kit-32-black-keeps-bimini-extended-up-to-45-mph-2020134626","title":"Taylor Made Products SureShade Sport Arms for Power Bimini Top, 32 Inch, Black - 2020134626","description":"\u003cp\u003eThe Taylor Made Products SureShade Sport Arms (part number 2020134626) let a SureShade Power Bimini top stay extended while underway, so you no longer have to retract the top before getting up to speed. The kit is rated to keep the Power Bimini deployed at speeds up to 45 mph, giving boaters continuous shade and coverage during a day on the water instead of stopping to fold the top down every time the boat picks up pace.\u003c\/p\u003e\u003cp\u003eThe arms are built from anodized aluminum for corrosion resistance and long-term durability in a marine environment. Installation is designed as a straightforward DIY job, and the kit includes everything needed to mount it: two front support poles, two flip-locks, and four mounting screws. The flip-lock hardware provides a quick-detach function, so the arms can be released and the bimini retracted quickly for storage or dockside when the extra support is not needed.\u003c\/p\u003e\u003cp\u003eThis 32 inch, black-finish kit is compatible with SureShade Power Bimini tops (formerly sold as PWR-ARM by Schwintek, Inc.). It is intended as an add-on support system for an existing SureShade Power Bimini top rather than a standalone bimini top.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2020134626\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e SureShade Sport Arms for Power Bimini Top\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.88 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 40 x 5 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Rated Speed:\u003c\/strong\u003e Up to 45 mph\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e 2 front support poles, 2 flip-locks, 4 mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Support Poles and Systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSureShade Power Bimini tops (formerly PWR-ARM by Schwintek, Inc.)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SureShade Sport Arms kit (2020134626) do?\u003c\/strong\u003e It lets a SureShade Power Bimini top stay extended and in place while the boat is underway, at speeds up to 45 mph, instead of requiring the top to be retracted first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with part number 2020134626?\u003c\/strong\u003e The kit includes two front support poles, two flip-locks, and four mounting screws, which is all the hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this kit made of?\u003c\/strong\u003e The support arms are made of anodized aluminum, chosen for corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and size is the 2020134626 Sport Arms kit?\u003c\/strong\u003e This kit is finished in black and sized for a 32 inch application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation difficult?\u003c\/strong\u003e No, the SureShade Sport Arms are designed for easy, DIY installation using the included mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit work with any bimini top?\u003c\/strong\u003e No, it is designed specifically to be compatible with SureShade Power Bimini tops, which were formerly sold as PWR-ARM by Schwintek, Inc.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the arms be removed when not needed?\u003c\/strong\u003e Yes, the flip-lock hardware on the 2020134626 kit provides quick-detach function so the arms can be released for retraction and storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sport Arms kit weigh?\u003c\/strong\u003e The kit weighs 1.88 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the kit as packaged?\u003c\/strong\u003e The product dimensions are 40 x 5 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete bimini top or an accessory?\u003c\/strong\u003e Part number 2020134626 is a support arm accessory kit intended to be added to an existing SureShade Power Bimini top, not a standalone bimini top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat speed can the bimini stay extended at with these arms installed?\u003c\/strong\u003e The SureShade Sport Arms are built to keep the Power Bimini top extended at speeds up to 45 mph.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989668999387,"sku":"NAT-2020134626","price":231.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/418qVezHshL.jpg?v=1784486752"},{"product_id":"sureshade-power-bimini-sport-arm-kit-32-in-silver-anodized-aluminum-mpn-2020134625-keeps-power-bimini-extended-at-speeds-up-to-45-mph","title":"Lippert Components SureShade Sport Arms Kit for Power Bimini Top, 32 Inch, Silver Anodized Aluminum, MPN 2020134625","description":"\u003cp\u003eThe Lippert Components SureShade Sport Arms Kit is a 32 inch silver anodized aluminum support arm system built for SureShade Power Bimini tops, allowing the bimini to remain extended at speeds up to 45 mph instead of requiring retraction underway. Each kit is constructed from durable anodized aluminum for corrosion resistance in a marine environment, and the silver anodized finish matches the appearance of the SureShade Power Bimini hardware it is designed to pair with.\u003c\/p\u003e\u003cp\u003eInstallation is a straightforward DIY job, with the kit including everything needed to mount the arms: two front support poles, two flip-locks, and four mounting screws. The flip-lock hardware provides a quick-detach function, so the arms can be released and the bimini top folded down and stowed when the boat is docked or trailered, then quickly reattached for the next outing. This kit is compatible with SureShade Power Bimini tops, which were formerly sold as PWR-ARM by Schwintek, Inc., making it a fit for owners upgrading or replacing worn support arms on that system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lippert Components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2020134625\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Support Poles \u0026amp; Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Anodized Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.88 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 40 x 5 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArm Length:\u003c\/strong\u003e 32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 848150063250\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e SureShade Power Bimini Tops (formerly PWR-ARM by Schwintek, Inc.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Speed Rating (Bimini Extended):\u003c\/strong\u003e 45 mph\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Two front support poles, two flip-locks, four mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Lippert Components SureShade Sport Arms Kit 2020134625 used for?\u003c\/strong\u003e It is a support arm kit that holds a SureShade Power Bimini top extended while the boat is underway, at speeds up to 45 mph, so the top does not need to be retracted every time the boat gets moving.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit fit any bimini top?\u003c\/strong\u003e No, the 2020134625 Sport Arms Kit is designed specifically for SureShade Power Bimini tops, which were formerly sold as PWR-ARM by Schwintek, Inc.; it is not designed as a universal fit for other bimini brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this support arm kit?\u003c\/strong\u003e The Lippert Components Sport Arms Kit measures 32 inches and ships in packaging sized 40 x 5 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sport Arms Kit weigh?\u003c\/strong\u003e This kit weighs 1.88 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does part 2020134625 come in?\u003c\/strong\u003e It has a silver anodized aluminum finish, matching the appearance of SureShade Power Bimini hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The kit includes two front support poles, two flip-locks, and four mounting screws, which is everything needed to install the arms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation difficult?\u003c\/strong\u003e Installation is designed to be an easy, DIY job using the included mounting hardware, without requiring professional installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the quick-detach feature work?\u003c\/strong\u003e The two flip-locks on the 2020134625 kit let the support arms be quickly released so the bimini top can be folded down and stowed, then reattached just as quickly for the next outing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the support arms made from?\u003c\/strong\u003e The arms are made from durable anodized aluminum, chosen for corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAt what speed can the bimini stay extended with this kit installed?\u003c\/strong\u003e Up to 45 mph, according to the rated speed for the SureShade Power Bimini when using the Sport Arms Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the same as the PWR-ARM system?\u003c\/strong\u003e Yes, this kit is compatible with SureShade Power Bimini tops, which is the current name for the system formerly sold as PWR-ARM by Schwintek, Inc.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989669097691,"sku":"NAT-2020134625","price":231.12,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41rtKjpbIhL.jpg?v=1784486757"},{"product_id":"taylor-made-anchorshade-iii-6-x-6-boat-shade-umbrella-white-mpn-22042","title":"Taylor Made Products Anchorshade III Boat Shade, 6 Foot x 6 Foot, White","description":"\u003cp\u003eThe Taylor Made Products Anchorshade III is a 6 foot by 6 foot square boat shade designed to shield the cockpit or deck from sun while anchored or running at idle speed on calm water. It mounts on an adjustable support pole with a 4-point locking height adjuster and a Sur-Lock push-up mechanism, letting it extend up to 8 feet to suit different boat heights. The frame uses solid fiberglass structural ribs paired with a powder-coated aluminum pole, so the frame resists rust even if the coating is scratched, and the canopy itself is made of UV-resistant polyester that measures 72 inches across. Non-corrosive hardware keeps the canopy taut and secure in winds under 10 miles per hour. Setup uses adjustable straps to anchor the shade to the boat, and the whole unit packs down into an included carrying case with a shoulder strap for storage or transport. Beyond boating, the same shade can be set up dockside or on the beach for portable sun cover. Care is simple: hand wash only with mild soap, air dry, and store in a cool, dry place when not in use. This White colorway is one of several finishes offered in the Anchorshade III line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 22042\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 6 feet x 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy Diameter:\u003c\/strong\u003e 72 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5 inches W x 72 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame Material:\u003c\/strong\u003e Aluminum, powder-coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRib Material:\u003c\/strong\u003e Fiberglass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy Material:\u003c\/strong\u003e Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Height:\u003c\/strong\u003e Up to 8 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWind Resistance:\u003c\/strong\u003e Winds less than 10 miles per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e UV resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Shade canopy, adjustable straps (5), support pole, carrying case\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made Products Anchorshade III, part number 22042?\u003c\/strong\u003e The Anchorshade III (part number 22042) is a 6 foot by 6 foot square shade with a canopy diameter of 72 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow tall does the support pole adjust?\u003c\/strong\u003e The pole on the Anchorshade III adjusts up to 8 feet using a 4-point locking height adjuster and a Sur-Lock push-up mechanism, so it can be set to match different boat heights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the frame made of?\u003c\/strong\u003e The Anchorshade III frame combines solid fiberglass structural ribs with a powder-coated aluminum pole, so the frame will not rust even if the coating gets scratched.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the canopy fabric?\u003c\/strong\u003e The canopy on part number 22042 is UV-resistant polyester, designed to block sun on the boat, dock, or beach.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much wind can this shade handle?\u003c\/strong\u003e The included non-corrosive hardware keeps the Anchorshade III canopy taut and secure in winds under 10 miles per hour; it is intended for use at anchor or idle speed on calm water rather than while underway.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this shade weigh?\u003c\/strong\u003e The Taylor Made Products Anchorshade III, White, weighs 8.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with part number 22042?\u003c\/strong\u003e The 22042 package includes the shade canopy, five adjustable straps, the support pole, and a carrying case with a shoulder strap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Anchorshade III installed on a boat?\u003c\/strong\u003e Installation uses the five adjustable straps to secure the canopy and pole to the boat, with no permanent mounting hardware required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Anchorshade III be used off the boat?\u003c\/strong\u003e Yes, part number 22042 is also designed for portable use dockside or on the beach in addition to boat use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I clean and store the Anchorshade III?\u003c\/strong\u003e Taylor Made Products recommends hand washing the 22042 shade only with mild soap, air drying it, and storing it in a cool, dry place when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat colors does the Anchorshade III come in besides White?\u003c\/strong\u003e Part number 22042 is the White version of the Anchorshade III; the same shade is also offered in other stock numbers and colors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat changed in the Anchorshade III compared to earlier versions?\u003c\/strong\u003e The Anchorshade III introduces larger-diameter, solid fiberglass structural ribs, hinge connectors twice as strong as the prior model, a powder-coated aluminum frame, a 4-point locking height adjuster, and a Sur-Lock push-up mechanism.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989669195995,"sku":"NAT-22042","price":169.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41S4DaKuRyL.jpg?v=1784486766"},{"product_id":"taylor-made-anchorshade-iii-boat-umbrella-navy-6-x-6-marine-shade-with-carry-case-mpn-22046","title":"Taylor Made Products Anchor Shade III Boat Umbrella, 6 x 6 Feet, Navy","description":"\u003cp\u003eThe Taylor Made Anchor Shade III is a 6-foot by 6-foot boat umbrella that provides shade for any vessel while anchored or at idle speed. Built for marine use, the canopy is made from marine-grade nylon fabric rated to block 85-90% of harmful UV rays, with a design that allows for venting so the shade stays stable in a breeze. The support frame is powder-coated aluminum to resist rust and corrosion, and the Sur-Lock push-up mechanism holds the umbrella securely in the open position. Reinforced fiberglass hinge connectors and solid fiberglass structural ribs give the frame added strength for repeated seasonal use.\u003c\/p\u003e\u003cp\u003eThe Anchor Shade III comes in the Navy color option and includes a durable carrying case with a shoulder strap for storage and transport. It is lightweight and portable, making it easy to set up whenever shade is needed on the water or at dockside.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 22046\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Anchor Shade III\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy Size:\u003c\/strong\u003e 6 feet x 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Navy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy Material:\u003c\/strong\u003e Marine-grade nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame Material:\u003c\/strong\u003e Powder-coated aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHinge Connectors:\u003c\/strong\u003e Fiberglass, reinforced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructural Ribs:\u003c\/strong\u003e Solid fiberglass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Sur-Lock push-up mechanism\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Protection:\u003c\/strong\u003e Blocks 85-90% of harmful UV rays\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Accessories:\u003c\/strong\u003e Carrying case with shoulder strap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made Anchor Shade III?\u003c\/strong\u003e The Anchor Shade III (part number 22046) has a 6-foot by 6-foot canopy, sized to shade most boats while anchored or moving at idle speed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the Anchor Shade III come in?\u003c\/strong\u003e This listing for part number 22046 is the Navy color option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much UV protection does the canopy provide?\u003c\/strong\u003e The marine-grade nylon canopy on the Anchor Shade III blocks 85-90% of harmful UV rays while still allowing venting so the shade stays stable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the frame made of?\u003c\/strong\u003e The Anchor Shade III uses a powder-coated aluminum frame, which resists rust and corrosion in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Anchor Shade III stay open and stable?\u003c\/strong\u003e A Sur-Lock push-up mechanism holds the umbrella securely in place once deployed, and reinforced fiberglass hinge connectors with solid fiberglass structural ribs give the frame extra strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Anchor Shade III come with a storage case?\u003c\/strong\u003e Yes, part number 22046 includes a durable carrying case with a shoulder strap for storage and transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Anchor Shade III weigh?\u003c\/strong\u003e The Anchor Shade III weighs 8.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Anchor Shade III be used while the boat is moving?\u003c\/strong\u003e Yes, the Anchor Shade III is designed to be used on any type of vessel when anchored or at idle speed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Anchor Shade III canopy fabric durable for repeated use?\u003c\/strong\u003e The nylon canopy fabric used on the Anchor Shade III is built to hold up over seasons of heavy use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Anchor Shade III lightweight enough to store easily?\u003c\/strong\u003e Yes, the Anchor Shade III is lightweight and comes with its own carrying case with a shoulder strap for convenient storage between uses.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989669425371,"sku":"NAT-22046","price":169.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41er22DxOQL.jpg?v=1784486783"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/51Zqo_wTUzL.jpg?v=1785356901","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-canvas-tops-covers.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}