{"title":"Fender Lines, Holders \u0026 Locks","description":null,"products":[{"product_id":"sea-dog-327110-1-rail-mount-loop-fender-cleat-with-clamcleat-cub-cleat-nylon-stainless-for-7-8-to-1-rails","title":"Sea-Dog Rail Mount Loop Cleat Fender Holder 327110-1 for 1\/8 to 1\/4 Inch Rope","description":"\u003cp\u003eThe Sea-Dog Rail Mount Loop Cleat Fender Holder (327110-1) is a compact, economical fitting that lets you attach fenders quickly using rope up to 1\/4 inch in diameter. It mounts to a boat's rail and includes a Clamcleat Cub Cleat-CL232 (002320), a jam-cleat style fitting that grips and releases the fender line without knots, so you can adjust fender height in seconds. The body is constructed of UV resistant injection molded nylon paired with stainless steel hardware, giving it long-term resistance to sun, salt spray, and marine weathering without corroding or becoming brittle.\u003c\/p\u003e\u003cp\u003eThis cleat is designed specifically for fender lines and accepts rope from 1\/8 inch up to 1\/4 inch in diameter. It is a simple, low-cost way to keep fenders positioned and secure along a rail without drilling or permanent line splicing. Sea-Dog also offers related rail mount accessories, including a rail mount cleat, fairlead, hooks, and holders, sold as separate part numbers for different mounting and rigging needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 327110-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rail Mount Loop Cleat Fender Holder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Cleat:\u003c\/strong\u003e Clamcleat Cub Cleat-CL232 (002320)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Nylon with Stainless Steel Hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Size (A):\u003c\/strong\u003e 1\/8 inch - 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension (B):\u003c\/strong\u003e 7\/8 inch - 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.23 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Screw-In\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Resistance:\u003c\/strong\u003e UV resistant nylon construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514327046\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit (boat rail mount)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal rail mount accessory; fits boat rails accepting standard rail mount hardware. Not vehicle- or engine-specific.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rope does the Sea-Dog 327110-1 rail mount cleat accept?\u003c\/strong\u003e The Sea-Dog Rail Mount Loop Cleat Fender Holder (327110-1) accepts fender rope from 1\/8 inch up to 1\/4 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cleat mechanism is included with part number 327110-1?\u003c\/strong\u003e It includes a Clamcleat Cub Cleat-CL232, a jam-cleat style fitting that grips the fender line and releases it with a simple pull, so no knot-tying is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 327110-1 fender cleat made of?\u003c\/strong\u003e The Sea-Dog 327110-1 is built from UV resistant injection molded nylon with stainless steel hardware, giving it corrosion resistance for saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog Rail Mount Loop Cleat Fender Holder weigh?\u003c\/strong\u003e This fender cleat, Sea-Dog part number 327110-1, weighs 0.23 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 327110-1 mounted on a boat?\u003c\/strong\u003e It is a rail mount fitting, installed with screw-in hardware onto a boat's rail, and is dimensioned to fit rails in the 7\/8 inch to 1 inch range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat resistant to sun and saltwater exposure?\u003c\/strong\u003e Yes, the nylon body of the 327110-1 is UV resistant, and the hardware is stainless steel, so it holds up to sun and marine spray without becoming brittle or rusting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 327110-1 work with any boat rail?\u003c\/strong\u003e This is a universal fit rail mount accessory intended for attachment to a boat's rail rather than a specific make, model, or engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog Rail Mount Loop Cleat Fender Holder?\u003c\/strong\u003e The 327110-1 fender cleat is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 327110-1 the same as the Sea-Dog Rail Mount Cleat 327111-1?\u003c\/strong\u003e No, they are different part numbers. The 327110-1 is a loop cleat fender holder built around a Clamcleat Cub Cleat-CL232 for fender lines up to 1\/4 inch, while the 327111-1 is a separate rail mount cleat with a Heavy Duty Cleat, sized differently and intended for a broader range of tie-down uses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 327110-1?\u003c\/strong\u003e The Sea-Dog Rail Mount Loop Cleat Fender Holder ships with the mounting body and its integrated Clamcleat Cub Cleat-CL232 (002320) fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 327110-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, 327110-1 is the genuine Sea-Dog manufacturer part number for this rail mount loop cleat fender holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this cleat primarily used for?\u003c\/strong\u003e The Sea-Dog 327110-1 is primarily used to attach and adjust boat fenders along a rail using rope up to 1\/4 inch in diameter.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988680585435,"sku":"S-D-327110-1","price":13.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4645.jpg?v=1784427339"},{"product_id":"sea-dog-327359-1-rail-mount-dual-fender-holder-9-1-2-inch-304-stainless-steel-for-7-8-to-1-inch-rails","title":"Sea-Dog Rail Mount Dual Fender Holder, 9-1\/2 Inch, 304 Stainless Steel, Fits 7\/8-1 Inch Rail","description":"\u003cp\u003eThe Sea-Dog Rail Mount Dual Fender Holder (327359-1) clamps onto boat railing to hold two fenders at any angle, keeping them positioned exactly where you need them along the hull. It is built for 7\/8 inch to 1 inch diameter tubing and adjusts to match the angle of the rail it is mounted on, so it sits flush and secure on straight runs, corners, or angled rail sections alike. This 9-1\/2 inch size holder is one of a range of Sea-Dog rail mount fender holders offered in different lengths.\u003c\/p\u003e\u003cp\u003eConstruction is formed 304 stainless steel, chosen for its resistance to corrosion in salt and fresh water environments, so the holder stands up to continuous marine exposure without rusting or pitting. Installation is straightforward: the mount clamps directly to the rail with no drilling required, and the holder folds flat against the rail for compact storage when fenders are not in use. It works with any style of fender, though fenders themselves are sold separately and not included with this holder.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 327359-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rail Mount Dual Fender Holder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength (A):\u003c\/strong\u003e 9-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Diameter Fit (B):\u003c\/strong\u003e 7\/8 inch to 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.32 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Formed 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFenders Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514327893\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal fit for boat rails measuring 7\/8 inch to 1 inch in diameter\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rail does the Sea-Dog 327359-1 fender holder fit?\u003c\/strong\u003e This holder is made for rail tubing measuring 7\/8 inch to 1 inch in diameter, and it adjusts to match whatever angle that rail section runs at.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Sea-Dog 327359-1 fender holder?\u003c\/strong\u003e It measures 9-1\/2 inches, the middle size in Sea-Dog's rail mount dual fender holder lineup, which also includes a 7-1\/2 inch and an 11-1\/2 inch version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fender holder come with fenders?\u003c\/strong\u003e No, fenders are not included with the Sea-Dog 327359-1; it holds fenders you already own or purchase separately, and it works with any style of fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fender holder made of?\u003c\/strong\u003e The Sea-Dog 327359-1 is constructed of formed 304 stainless steel, a corrosion resistant grade suited to continuous salt and fresh water exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 327359-1 weigh?\u003c\/strong\u003e It weighs 2.32 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the holder mount to the boat?\u003c\/strong\u003e It clamps directly onto rail tubing between 7\/8 inch and 1 inch in diameter, with no drilling required to install it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this holder be adjusted to angled rail sections?\u003c\/strong\u003e Yes, the Sea-Dog 327359-1 adjusts to any angle of railing, so it mounts securely on straight runs, corners, or slanted rail sections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fender holder fold down when not holding a fender?\u003c\/strong\u003e Yes, it folds flat against the rail for compact storage when it is not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fenders does this holder hold?\u003c\/strong\u003e The 327359-1 is a dual fender holder, meaning it is designed to hold two fenders at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 327359-1?\u003c\/strong\u003e The UPC is 035514327893.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 327359-1 different from Sea-Dog's other rail mount fender holders?\u003c\/strong\u003e It is the 9-1\/2 inch length version; Sea-Dog also offers a 7-1\/2 inch holder (327357-1) and an 11-1\/2 inch holder (327361-1) for the same 7\/8 inch to 1 inch rail tubing.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988752642267,"sku":"S-D-327359-1","price":121.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5576.jpg?v=1784428743"},{"product_id":"sea-dog-327234-1-nylon-loop-cleat-clamcleat-cl223w-white-fender-line-cleat-for-1-8-to-1-4-in-rope","title":"Sea-Dog Nylon Fender Cleat 327234-1, White, for 1\/4 to 1\/2 Inch Line","description":"\u003cp\u003eThe Sea-Dog Nylon Fender Cleat (327234-1) is a compact cam-style cleat used to lock off fender lines, flag halyards, and other small-diameter rope on board. It accepts line from 1\/4 inch up to 1\/2 inch in diameter, letting one cleat handle a range of fender and accessory line sizes without needing a separate cleat for each rope thickness. The cleat is molded in white nylon for a clean look that blends with white hull sides, rail systems, and cockpit trim, and it uses a J-hook style fastener for mounting. This design lets a boat owner drop a fender line into the cleat and cam it in place quickly, then release it just as fast when repositioning fenders or stowing gear, which is especially useful when docking or rafting up where fenders need frequent adjustment. Because it is a simple mechanical cleat with no moving springs or electronics, it holds up well to sun, saltwater spray, and repeated use. At 0.132 pounds it is lightweight enough to mount on rails, gunwales, or cockpit surfaces without adding noticeable weight, and it ships as a single cleat (unit count of 1) ready to install.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 327234-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e J-Hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Line Diameter:\u003c\/strong\u003e 1\/4 inch to 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.132 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1 cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Vehicle Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514327169\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat line diameter does the Sea-Dog 327234-1 fender cleat accept?\u003c\/strong\u003e The Sea-Dog Nylon Fender Cleat 327234-1 is rated for line from 1\/4 inch up to 1\/2 inch in diameter, covering most common fender and accessory line sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this cleat made of?\u003c\/strong\u003e It is molded from nylon, which resists sun and saltwater exposure better than untreated metal fittings and will not corrode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 327234-1 fender cleat?\u003c\/strong\u003e It is finished in white, matching typical white hull, rail, and cockpit trim on most boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog 327234-1 mounted?\u003c\/strong\u003e The cleat uses a J-hook style fastener for attachment rather than a standard screw-down base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fender cleat weigh?\u003c\/strong\u003e The Sea-Dog 327234-1 weighs 0.132 pounds, making it light enough for rail or gunwale mounting without adding noticeable weight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part number 327234-1?\u003c\/strong\u003e Each order includes one Sea-Dog nylon fender cleat, listed with a package quantity of 1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used for anything besides fender lines?\u003c\/strong\u003e Yes, a cam-style cleat like the 327234-1 can also secure flag halyards, canvas tie-downs, and other small-diameter line, not just fender lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 327234-1 genuine Sea-Dog hardware?\u003c\/strong\u003e Yes, 327234-1 is the manufacturer part number assigned directly by Sea-Dog for this nylon fender cleat, not an aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat work on a boat with a black or dark colored rail?\u003c\/strong\u003e The 327234-1 is molded in white, so it will contrast against dark rails and hull surfaces rather than blend in; buyers wanting a different finish should confirm color before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the rope release easily from this cleat?\u003c\/strong\u003e The cam action of a cleat like the Sea-Dog 327234-1 is designed to grip line under load while still allowing quick release when repositioning fenders.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988754673883,"sku":"S-D-327234-1","price":10.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4645_4ee17092-49d7-4d80-9fd8-86d6fc970928.jpg?v=1784428770"},{"product_id":"sea-dog-327200-1-rail-mount-loop-cleat-fender-holder-oem-702769-fits-7-8in-1in-rails-and-3-16in-1-4in-lifelines-white-marine-nylon-pair","title":"Sea-Dog Fendermate 327200-1 Nylon Fender Bracket for 7\/8 to 1 Inch Rail and 1\/4 to 5\/16 Inch Line, White (Pair)","description":"\u003cp\u003eThe Sea-Dog Fendermate 327200-1 is an adjustable fender bracket built to hold boat fenders securely at the correct height on rail or lifeline mounting. Made of marine grade reinforced injection molded nylon, the clamp body resists corrosion and UV breakdown better than metal hardware while still standing up to constant flexing and sun exposure at the dock or underway. It clamps directly onto 7\/8 inch or 1 inch round tubing, or onto 3\/16 inch or 1\/4 inch lifeline wire, making it a fit for the most common railing and lifeline diameters found on recreational boats. A rope or line size of 1\/4 inch to 5\/16 inch runs through the bracket to suspend the fender.\u003c\/p\u003e\u003cp\u003eThe design uses a unique double locking action: the first lock clamps the bracket onto the rail or wire while still allowing the fender height to be freely adjusted up or down. Once the fender sits at the desired height, a second locking action clamps down on the rope quickly and securely, so the fender stays in place instead of sliding or slipping. This two-step process makes it fast to reposition fenders when docking on different sides or at different tide heights, without needing tools. Finished in white, the bracket is sold as a pair (two brackets) and each bracket weighs 0.272 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 327200-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fendermate fender bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine grade reinforced injection molded nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail\/Tubing Compatibility:\u003c\/strong\u003e 7\/8 inch and 1 inch round tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifeline Wire Compatibility:\u003c\/strong\u003e 3\/16 inch and 1\/4 inch wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope\/Line Size:\u003c\/strong\u003e 1\/4 inch to 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Double locking clamp action\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.272 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair (2 brackets)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514327121\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 702769\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRail or tubing diameter: 7\/8 inch or 1 inch round tubing\u003c\/li\u003e\n\u003cli\u003eLifeline wire diameter: 3\/16 inch or 1\/4 inch\u003c\/li\u003e\n\u003cli\u003eFender line\/rope diameter: 1\/4 inch to 5\/16 inch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e702769\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sea-Dog Fendermate 327200-1 fit onto?\u003c\/strong\u003e The Fendermate 327200-1 clamps onto 7\/8 inch or 1 inch round tubing, and also onto 3\/16 inch or 1\/4 inch lifeline wire, covering the most common boat railing and lifeline sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part 702769 the same as the Sea-Dog 327200-1?\u003c\/strong\u003e Yes, 702769 is the OEM cross-reference number for the Sea-Dog Fendermate 327200-1 fender bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rope or line diameter works with this fender bracket?\u003c\/strong\u003e The 327200-1 accepts a fender line diameter of 1\/4 inch to 5\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many brackets come in one order?\u003c\/strong\u003e The Fendermate 327200-1 is sold as a pair, so two fender brackets are included per order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog Fendermate made from?\u003c\/strong\u003e It is made of marine grade reinforced injection molded nylon, chosen for corrosion resistance and durability in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the fender height adjust once the bracket is mounted?\u003c\/strong\u003e The 327200-1 uses a double locking action: the first lock secures the bracket to the rail or wire while still allowing the fender height to be freely raised or lowered, and the second lock clamps the rope once the height is set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does one Sea-Dog 327200-1 bracket weigh?\u003c\/strong\u003e Each Fendermate 327200-1 bracket weighs 0.272 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 327200-1 fender bracket?\u003c\/strong\u003e The Sea-Dog Fendermate 327200-1 is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this bracket be used on a boat with 1 inch diameter rails?\u003c\/strong\u003e Yes, the 327200-1 is designed to clamp securely onto 1 inch round tubing as well as 7\/8 inch tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 327200-1 work on lifeline wire instead of a tube rail?\u003c\/strong\u003e Yes, in addition to round tubing, the Fendermate 327200-1 clamps onto 3\/16 inch or 1\/4 inch lifeline wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog Fendermate genuine Sea-Dog hardware or an aftermarket copy?\u003c\/strong\u003e The 327200-1 is a genuine Sea-Dog manufactured part, identified by manufacturer part number 327200-1 and UPC 035514327121.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fender bracket come with tools required for installation?\u003c\/strong\u003e No tools are required; the double locking action of the 327200-1 is designed for tool-free hand clamping onto the rail, wire, and fender line.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988754706651,"sku":"S-D-327200-1","price":15.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4645_ed3d06da-e129-4ff4-8b6d-5fff30674350.jpg?v=1784428778"},{"product_id":"taylor-made-products-1001-stainless-steel-fender-lock-peg-set-universal-boat-fender-mount-for-lines-up-to-1-2","title":"Taylor Made Products 1001 Stainless Steel Boat Fender Lock and Peg, Fits Fender Lines up to 1\/2 Inch","description":"\u003cp\u003eThe Taylor Made Products 1001 Stainless Steel Fender Lock and Peg is a simple, durable way to keep boat fenders securely positioned along the rail while docking, mooring, or rafting up. The set pairs a fixed mounting lock with a one-way locking adjustment peg, so once a fender line is set at the height you want, it stays there instead of sliding up and down the rail with every wave or wake. The lock and peg are made from stainless steel for corrosion resistance in saltwater and freshwater marine environments, with a polished silver finish that matches other stainless hardware on deck.\u003c\/p\u003e\u003cp\u003eThe peg accepts fender lines up to 1\/2 inch in diameter, covering the sizing used on most common boat fenders. Mounting screws are included, so the set installs directly onto a rail, hull, or mounting surface with basic hand tools. The one-way locking design means the peg can be adjusted to set the fender height, then locks in place to resist accidental loosening. This is a universal-fit accessory, intended to work with fender lines generally rather than a single boat make or model.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Line Diameter:\u003c\/strong\u003e Up to 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Screw-In\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Thickness:\u003c\/strong\u003e 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Fender Lock, Fender Peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size fender lines does the Taylor Made 1001 fit?\u003c\/strong\u003e The Taylor Made Products 1001 fender lock and peg accepts fender lines up to 1\/2 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with part number 1001?\u003c\/strong\u003e The set includes a fender lock and a fender peg, along with mounting screws for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1001 fender lock adjustable?\u003c\/strong\u003e Yes, it uses a one-way locking adjustment peg, so the fender line height can be set and it locks in place to resist slipping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 1001 fender lock made from?\u003c\/strong\u003e It is made from stainless steel with a polished silver finish, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fender lock fit a specific boat make or model?\u003c\/strong\u003e No, the Taylor Made 1001 is a universal-fit accessory designed to work with standard fender lines rather than a specific boat make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 1001 fender lock installed?\u003c\/strong\u003e It is a screw-in installation, using the mounting screws included with the fender lock and peg set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made 1001 fender lock weigh?\u003c\/strong\u003e The complete fender lock and peg set weighs 0.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the peg be removed or is it a fixed mount?\u003c\/strong\u003e The 1001 set combines a mounted lock with a locking peg for the fender line; the peg locks in one direction once the desired height is set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does the 1001 fender lock come in?\u003c\/strong\u003e It has a polished silver finish, matching typical stainless steel marine hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use a fender lock and peg instead of just tying off a fender line?\u003c\/strong\u003e A locking peg like the Taylor Made 1001 holds the fender line at a set height so it does not slide along the rail during docking, mooring, or rafting, which a simple tied-off line can allow.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989521969371,"sku":"NAT-1001","price":42.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__22901.1763741553.500.750.jpg?v=1785188698"},{"product_id":"taylor-made-1005-hand-pump-with-hose-adapter-for-inflating-boat-fenders-buoys-water-toys-abs-plastic-made-in-usa","title":"Taylor Made Hand Pump with Hose Adapter, ABS Plastic, for Boat Fenders and Water Toys","description":"\u003cp\u003eThe Taylor Made hand pump with hose adapter (part number 1005) is a compact, handheld inflator built for boaters who need a quick way to top off air pressure in fenders, buoys, and water toys. Measuring just 8 inches long and 1.5 inches in diameter, it is small enough to stow in a helm compartment, tackle box, or storage locker without taking up meaningful space. The pump is molded from ABS plastic for durability in a marine environment, and it is rated to a maximum pressure of 150 pounds per square inch.\u003c\/p\u003e\u003cp\u003eA key feature of this pump is its integrated hose adapter, which lets you reach valves that are recessed or otherwise hard to access, a common problem when inflating boat fenders and buoys with tight or angled inflation ports. Operation is fully manual and handheld, so no battery, compressor, or power source is required, making it a reliable backup even when other inflation equipment is unavailable. Each order includes one hand pump with hose adapter, and the unit is manufactured in the USA.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1005\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Boat Fenders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e ABS Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 8 inches L x 1.5 inches W x 1.5 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pressure:\u003c\/strong\u003e 150 pounds per square inch (PSI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual, handheld\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Hand Pump, Hose Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011321053\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made 1005 hand pump used for?\u003c\/strong\u003e It is a manual hand pump used to inflate boat fenders, buoys, and water toys, and to add quick air pressure adjustments to those items while on board.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pump come with a hose adapter?\u003c\/strong\u003e Yes, the Taylor Made 1005 includes an attached hose adapter that lets you reach valves that are recessed or otherwise hard to access on fenders and buoys.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of part number 1005?\u003c\/strong\u003e The Taylor Made hand pump measures 8 inches long by 1.5 inches wide by 1.5 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the pump made of?\u003c\/strong\u003e The Taylor Made 1005 hand pump is constructed of ABS plastic, chosen for durability in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum pressure rating of this pump?\u003c\/strong\u003e The Taylor Made hand pump is rated to a maximum pressure of 150 pounds per square inch (PSI).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1005 a manual or powered pump?\u003c\/strong\u003e It is a manual, handheld pump that requires no battery or compressor to operate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Taylor Made hand pump?\u003c\/strong\u003e The pump is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made 1005 hand pump weigh?\u003c\/strong\u003e It weighs 0.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part number 1005?\u003c\/strong\u003e Each order includes one Taylor Made hand pump with hose adapter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1005 hand pump made in the USA?\u003c\/strong\u003e Yes, the Taylor Made hand pump with hose adapter is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this pump inflate items with hard-to-reach valves?\u003c\/strong\u003e Yes, the hose adapter on the Taylor Made 1005 is specifically designed to reach valves that are difficult to access directly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this pump work on buoys and water toys, or only fenders?\u003c\/strong\u003e The Taylor Made 1005 hand pump is used for fenders, buoys, and water toys, not just boat fenders.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989663461595,"sku":"NAT-1005","price":16.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-2__33079.1763741545.500.750.jpg?v=1785189030"},{"product_id":"taylor-made-1009-extra-locking-peg-for-boat-fender-lock-1010-reinforced-nylon","title":"Taylor Made Extra Locking Peg #1009 for Boat Fender Lock #1010, Nylon","description":"\u003cp\u003eThe Taylor Made #1009 is an extra locking peg for the Taylor Made Fender Lock Set #1010, sold individually so boaters can add a second adjustment point or replace a lost or worn peg without buying a whole new lock set. It is built from injection-molded reinforced nylon for long-term durability in a marine environment, and its internal teeth grip firmly onto the fender line so the fender stays securely positioned at the height you set it. The housing is vented, which keeps water from accumulating and pooling inside the fender tube, protecting the peg and extending its service life. This peg accepts rope or line up to 3\/4 inch in diameter and is designed for use with fenders that have 1\/2 inch diameter tubing, matching the sizing of the companion #1010 Fender Lock Set. It is finished in white to blend in with Taylor Made fenders and most boat fender lines. Each order includes one locking peg only; it does not include the lock body. This is a simple, purpose-built accessory for boaters who want a spare or replacement peg on hand, or who are outfitting a second fender line and need an additional adjustment peg to match their existing #1010 lock.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1009\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon (injection-molded reinforced nylon)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Length:\u003c\/strong\u003e 4.88 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Width:\u003c\/strong\u003e 1.94 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.02 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope\/Line Compatibility:\u003c\/strong\u003e Accepts line up to 3\/4 inch in diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Tubing Compatibility:\u003c\/strong\u003e For fenders with 1\/2 inch diameter tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Taylor Made Fender Lock Set #1010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Design:\u003c\/strong\u003e Yes, vented to prevent water accumulation in the fender tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1 locking peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011321091\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made #1009 used for?\u003c\/strong\u003e The #1009 is a single replacement or additional locking peg for the Taylor Made Fender Lock Set #1010; it lets you adjust a boat fender's height on the line and re-secure it in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the #1009 come with a lock body?\u003c\/strong\u003e No. The #1009 is the peg only, not the full lock assembly. The complete lock-and-peg unit is sold as the Taylor Made Fender Lock Set #1010.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rope or line diameter does this peg accept?\u003c\/strong\u003e The Taylor Made #1009 locking peg accepts line up to 3\/4 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fender tubing size is the #1009 peg designed for?\u003c\/strong\u003e This peg is designed for fenders with 1\/2 inch diameter tubing, matching the sizing of the Taylor Made #1010 Fender Lock Set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the locking peg made from?\u003c\/strong\u003e It is made from injection-molded reinforced nylon, chosen for durability in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the peg keep the fender in place?\u003c\/strong\u003e Internal teeth on the #1009 peg grip the rope firmly, which locks the fender at the height it has been set to on the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the peg vented?\u003c\/strong\u003e The Taylor Made #1009 peg is vented so water does not accumulate inside the fender tube, which helps prevent damage and extends the part's usable life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the #1009 locking peg?\u003c\/strong\u003e The peg is white, matching the color of most Taylor Made fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pegs are included in an order?\u003c\/strong\u003e Each order of part number 1009 includes one locking peg.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the #1009 peg?\u003c\/strong\u003e The Taylor Made #1009 measures 4.88 inches in length by 1.94 inches in width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the #1009 an OEM Taylor Made part?\u003c\/strong\u003e Yes, 1009 is the genuine Taylor Made manufacturer part number for this locking peg.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the #1009 be used with a fender lock other than the #1010?\u003c\/strong\u003e The #1009 peg is designed to match the Taylor Made Fender Lock Set #1010; no other lock compatibility is specified for this part.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989663723739,"sku":"NAT-1009","price":3.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__35826.1757600006.500.750.jpg?v=1785188111"},{"product_id":"taylor-made-products-1015-tidy-ups-boat-fender-adjuster-white-standard-rail-size","title":"Taylor Made Products Tidy-Ups Fender Adjuster, White Vinyl, Standard Rail Size (Part No. 1015)","description":"\u003cp\u003eThe Taylor Made Products Tidy-Ups Fender Adjuster (part number 1015) is a white vinyl fender adjuster built for standard rail size boats. It lets you raise or lower a fender line quickly to match changing dock heights, so your boat stays protected against pilings and dock edges without constantly retying lines by hand.\u003c\/p\u003e\u003cp\u003eThe adjuster is built around a PVC mounting strap that snaps directly over your boat's railing or cleats and holds lines up to 5\/8 inch in diameter. It ships with a 6 foot 3\/8 inch polypropylene rope that has a pre-spliced end, which prevents fraying and kinking and makes threading the fender line fast and clean. The white color is designed to match Taylor Made's color-coordinated fender line, so the finished look stays consistent with the rest of your fender setup. The adjuster is made in the USA to Taylor Made's standard construction quality.\u003c\/p\u003e\u003cp\u003eThis is the standard rail size version of the Tidy-Ups adjuster, intended for typical boat railings rather than the larger rail size covered by a different Taylor Made part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1015\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Size:\u003c\/strong\u003e Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Material:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Length:\u003c\/strong\u003e 6 feet 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Line Diameter:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011285324\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat rail size does the Taylor Made 1015 fender adjuster fit?\u003c\/strong\u003e The Taylor Made Tidy-Ups fender adjuster, part number 1015, is designed for standard rail size boats rather than the larger rail size covered by a different Taylor Made part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the fender adjuster attach to the boat?\u003c\/strong\u003e A PVC mounting strap on part number 1015 snaps directly over the boat's railing or cleats, giving a secure hold without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fender line can I use with this adjuster?\u003c\/strong\u003e The mounting strap on the 1015 fender adjuster holds lines up to 5\/8 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Taylor Made 1015 come with a rope included?\u003c\/strong\u003e Yes, it ships with a 6 foot 3\/8 inch polypropylene rope that has a pre-spliced end to prevent kinking during threading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 1015?\u003c\/strong\u003e Part number 1015 is white vinyl, matched to Taylor Made's color-coordinated fender line system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fender adjuster made in the USA?\u003c\/strong\u003e Yes, the Taylor Made Tidy-Ups fender adjuster is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made 1015 fender adjuster weigh?\u003c\/strong\u003e It weighs 0.28 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a fender adjuster used for?\u003c\/strong\u003e A fender adjuster like the Taylor Made 1015 lets a boater quickly raise or lower a fender's hanging position to match different dock heights, protecting the hull without retying the line each time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need tools to install the 1015 fender adjuster?\u003c\/strong\u003e No, the PVC mounting strap simply snaps over the boat's railing or cleats, so no tools are required for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the rope pre-spliced or do I need to finish the end myself?\u003c\/strong\u003e The included 6 foot 3\/8 inch polypropylene rope has a pre-spliced end already finished to prevent kinks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made 1015 fender adjuster?\u003c\/strong\u003e The UPC for this white vinyl, standard rail size fender adjuster is 040011285324.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989663822043,"sku":"NAT-1015","price":18.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71P_jiXh1ML.jpg?v=1784486401"},{"product_id":"taylor-made-1010-stainless-steel-boat-fender-lock-and-peg-set-traditional-hanging-fender-mount-accepts-rope-up-to-1-4-in-screws-included","title":"Taylor Made Products Stainless Steel Fender Lock and Peg Set, Accepts Rope up to 1\/4 Inch, Part 1010","description":"\u003cp\u003eThe Taylor Made Products Fender Lock and Peg Set (Part Number 1010) is a stainless steel hardware set used to hang boat fenders from the rail or stanchion using a length of rope line. The set consists of a fender lock and a fender peg, and is built from stainless steel for lasting resistance to harsh marine conditions. It accepts rope line up to 1\/4 inch in diameter, and the lock uses a pull-style pin for quick attachment and release when adjusting fender height or removing fenders for storage.\u003c\/p\u003e\u003cp\u003eThe lock and peg measure 4.88 inches by 1.94 inches by 0.75 inches overall, with a polished silver finish, and the peg thread size is 1\/4-20. Mounting screws with a round head style are included, so the set can be installed directly without sourcing separate hardware. This set is designed as a direct replacement for existing fender lock and peg hardware that has worn out or corroded, making it a straightforward swap on boats that already use this style of fender hanging system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Fender Lock and Peg Set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 4.88 inches x 1.94 inches x 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Diameter Capacity:\u003c\/strong\u003e Up to 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/4-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Type:\u003c\/strong\u003e Pull\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Head Style:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Fender Lock, Fender Peg, Mounting Screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011321107\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Fender Lock and Peg Set (Part 1010) used for?\u003c\/strong\u003e It is used to hang a boat fender from a rail or stanchion using a length of rope line, letting the fender height be adjusted or the fender removed quickly with the pull-style pin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rope diameter does part number 1010 accept?\u003c\/strong\u003e The fender lock accepts rope line up to 1\/4 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the fender lock and peg made from?\u003c\/strong\u003e Stainless steel, chosen for its resistance to corrosion in marine conditions, with a polished silver finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Taylor Made fender lock and peg set?\u003c\/strong\u003e The set measures 4.88 inches by 1.94 inches by 0.75 inches overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fender lock set include mounting hardware?\u003c\/strong\u003e Yes, mounting screws with a round head style are included with the Taylor Made Fender Lock and Peg Set, Part 1010.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with part number 1010?\u003c\/strong\u003e The set includes one fender lock, one fender peg, and mounting screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does the fender peg use?\u003c\/strong\u003e The peg uses a 1\/4-20 thread size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the pin on the fender lock work?\u003c\/strong\u003e The Taylor Made fender lock uses a pull-type pin, allowing the rope line to be locked in place or released by pulling the pin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan part 1010 be used to replace an old or corroded fender lock?\u003c\/strong\u003e Yes, this stainless steel set is designed as a direct replacement for worn fender lock and peg hardware of this style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made Fender Lock and Peg Set weigh?\u003c\/strong\u003e It weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does part number 1010 come in?\u003c\/strong\u003e It has a silver, polished finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the UPC for the Taylor Made Fender Lock and Peg Set 1010 listed anywhere?\u003c\/strong\u003e Yes, the UPC for this set is 040011321107.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989663854811,"sku":"NAT-1010","price":10.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__12322.1763741540.500.750.jpg?v=1785188789"},{"product_id":"taylor-made-products-1016-tidy-ups-fender-adjuster-standard-rail-size-black-vinyl-snaps-over-lifelines-and-railings","title":"Taylor Made Products Tidy-Ups Fender Adjuster 1016, Black Vinyl, Standard Rail Size, Sold in Pairs","description":"\u003cp\u003eThe Taylor Made Products Tidy-Ups Fender Adjuster, part number 1016, is a black vinyl fender adjuster built for boaters who need a quick, adjustable way to hang fenders from a rail or stanchion system. Its movable J-hooks mount directly onto 1 inch rails and stanchion systems, letting you slide the adjuster along the rail to set the fender at the height you need, then lock it in place. The adjuster holds line up to 5\/8 inch in diameter, making it compatible with standard fender lines and pendants used on most recreational boats.\u003c\/p\u003e\u003cp\u003eThis is the Standard Rail Size version, finished in black vinyl. Taylor Made also offers a White Vinyl Large Rail Size version under a separate part number for boats with larger rail diameters. The 1016 adjuster measures 9.5 inches long by 3.25 inches wide by 1.75 inches high and weighs 0.28 pounds. It is sold in pairs, so one order equips both sides of a typical fender setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1016\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Size:\u003c\/strong\u003e Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Movable J-hooks, mounts on 1 inch rails and stanchion systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Capacity:\u003c\/strong\u003e Holds line up to 5\/8 inch in diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 9.5 inches L x 3.25 inches W x 1.75 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Sold in pairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts on 1 inch rails and stanchion systems\u003c\/li\u003e\n\u003cli\u003eStandard Rail Size (a White Vinyl Large Rail Size version, part number 1018, is available separately for larger rails)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat rail size does the Taylor Made 1016 fender adjuster fit?\u003c\/strong\u003e Part number 1016 is the Standard Rail Size version, with movable J-hooks that mount on 1 inch rails and stanchion systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much line can this fender adjuster hold?\u003c\/strong\u003e The Tidy-Ups fender adjuster 1016 holds line up to 5\/8 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1016 sold as a single unit or a pair?\u003c\/strong\u003e It is sold in pairs, so one order provides adjusters for both sides of a typical fender setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 1016?\u003c\/strong\u003e Part number 1016 is finished in black vinyl.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a version for larger rails?\u003c\/strong\u003e Yes, Taylor Made Products offers a White Vinyl Large Rail Size version under a separate part number, 1018, for boats with larger diameter rails.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 1016 fender adjuster?\u003c\/strong\u003e It measures 9.5 inches long by 3.25 inches wide by 1.75 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1016 fender adjuster weigh?\u003c\/strong\u003e Each Tidy-Ups fender adjuster 1016 weighs 0.28 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this adjuster be used on a stanchion instead of a rail?\u003c\/strong\u003e Yes, the movable J-hooks on the 1016 mount on both 1 inch rails and stanchion systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Tidy-Ups fender adjuster made from?\u003c\/strong\u003e The 1016 fender adjuster is made from black vinyl.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need tools to install the 1016 fender adjuster?\u003c\/strong\u003e The J-hooks on part number 1016 are movable and mount onto the rail or stanchion, allowing tool-free positioning along the rail.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989664018651,"sku":"NAT-1016","price":25.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61gqucUpFWL.jpg?v=1784486411"},{"product_id":"taylor-made-products-1093-rail-mount-fender-line-clip-for-7-8-rails-white-pair","title":"Taylor Made Products 1093 Rail Mount Fender Line Clip for 7\/8 Inch Rails, White (Pair)","description":"\u003cp\u003eThe Taylor Made Products 1093 Rail Mount Fender Line Clip gives boaters a quick, hardware-free way to secure fender lines directly to a boat's railing. Each clip attaches to rails measuring 7\/8 inch in diameter, snapping the fender line in place without the need for tying and retying knots every time fenders are deployed or stowed. Beyond fenders, the clip is versatile enough to hold power cords and other lines along the rail, keeping the deck organized and free of tripping hazards.\u003c\/p\u003e\u003cp\u003eConstructed from heavy duty polyethylene, the clip is built to withstand sun, salt, and moisture exposure typical of marine environments. It is finished in white to blend in with most boat railings and hardware. The clip is sold as a pair, giving boaters enough to outfit both port and starboard fender lines from a single purchase.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1093\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rail Mount Fender Line Clip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Compatibility:\u003c\/strong\u003e 7\/8 inch railings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Heavy duty polyethylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Sold in pairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 8 x 5 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rail does the Taylor Made 1093 fender line clip fit?\u003c\/strong\u003e The Taylor Made Products 1093 clip is designed to clip onto 7\/8 inch railings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1093 clip sold as a single unit or a pair?\u003c\/strong\u003e The 1093 Rail Mount Fender Line Clip is sold in pairs, giving you two clips per purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Taylor Made 1093 clip made from?\u003c\/strong\u003e It is made from heavy duty polyethylene, a durable plastic suited to marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Taylor Made 1093 fender line clip?\u003c\/strong\u003e The 1093 clip is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 1093 clip be used for anything besides fender lines?\u003c\/strong\u003e Yes, in addition to hanging fenders, the Taylor Made 1093 clip can be used to hold power cords and other lines along the rail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Taylor Made 1093 clip?\u003c\/strong\u003e The item measures 8 x 5 x 1.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made 1093 fender line clip weigh?\u003c\/strong\u003e The 1093 clip weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1093 clip require tools or hardware to install?\u003c\/strong\u003e No, the Taylor Made 1093 clip attaches by clipping directly onto a 7\/8 inch rail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1093 a genuine manufacturer part?\u003c\/strong\u003e Yes, it is manufactured by Taylor Made Products under part number 1093.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the package with the 1093 clip?\u003c\/strong\u003e The package includes a pair of Rail Mount Fender Line Clips, part number 1093.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989664674011,"sku":"NAT-1093","price":17.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__57258.1757595175.500.750.jpg?v=1785188466"},{"product_id":"taylor-made-products-1094-hook-loop-fender-strap-36-pair-adjustable-marine-fender-adjuster","title":"Taylor Made Hook and Loop Fender Strap, 36 Inch, Sold in Pairs (Part 1094)","description":"\u003cp\u003eThe Taylor Made Hook and Loop Fender Strap is a 36 inch fastener designed to make fender height adjustment fast and simple when docking, mooring, or rafting up. Rather than tying and retying fender lines, you loop the strap through the fender eye, pull it to the length you need, and secure it with the hook and loop closure. This lets boaters quickly reposition fenders to match changing dock heights or hull configurations without re-rigging.\u003c\/p\u003e\u003cp\u003eThe strap is built from tough 3\/4 inch polyester webbing with UV protection, paired with a marine-grade hook and loop fastening system rated for repeated use in wet, sun-exposed conditions. It is sold as a pair (2 straps), each measuring 36 inches in length, and finished in black to blend in against most hull and fender colors. Each pair weighs 0.1 pounds, making it a lightweight addition to any fender setup.\u003c\/p\u003e\u003cp\u003eThis fender strap is a universal fit accessory, compatible with standard fender eyes rather than being tied to a specific boat make or model, so it works across most recreational boats using conventional bow-and-stern fender lines.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1094\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hook and Loop Fender Strap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e Sold in pairs (2 straps)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester webbing with hook and loop fastener\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011010940\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Hook and Loop Fender Strap used for?\u003c\/strong\u003e It is used to quickly adjust the height of a boat fender when docking, mooring, or rafting up, by looping the strap 1094 through the fender eye and securing it at the length you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is each fender strap?\u003c\/strong\u003e Each strap in Taylor Made part 1094 measures 36 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many straps come in a pack?\u003c\/strong\u003e Part 1094 is sold in pairs, so each pack includes 2 fender straps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the fender strap made from?\u003c\/strong\u003e The 1094 strap is made from 3\/4 inch polyester webbing with UV protection, closed with a marine-grade hook and loop fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Taylor Made fender strap?\u003c\/strong\u003e Part 1094 is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a pair of fender straps weigh?\u003c\/strong\u003e A pair of Taylor Made 1094 fender straps weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fender strap fit any boat?\u003c\/strong\u003e Yes, the 1094 strap is a universal accessory that works with standard fender eyes rather than being limited to a specific boat make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you install the fender strap?\u003c\/strong\u003e Loop the 1094 strap through the fender eye, pull the strap to the desired length, and press the hook and loop closure together to secure it; no tools are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Taylor Made product?\u003c\/strong\u003e Yes, part 1094 is a genuine Taylor Made Hook and Loop Fender Strap, not a generic substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when you order this product?\u003c\/strong\u003e Ordering part 1094 includes one pair (2 straps) of 36 inch hook and loop fender straps.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989664739547,"sku":"NAT-1094","price":10.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81RWiAqa6GL.jpg?v=1784486465"},{"product_id":"taylor-made-products-1085-big-b-fender-hanger-3-pack-reinforced-nylon-rope-lock-for-3-8-rope-and-3-4-i-d-fender-tubes","title":"Taylor Made Products 1085 Big B Fender Hanger for 0.75 Inch I.D. Fender Tubing, Pack of 3","description":"\u003cp\u003eThe Taylor Made Products 1085 Big B Fender Hanger is a rope lock designed to secure boat fenders onto their mounting line so they hang firmly in place along the hull. It is built for use on Taylor Made fenders with 0.75-inch internal diameter tubing and accepts rope up to 0.375-inch (3\/8 inch) in diameter. Each hanger is molded from injection-molded, reinforced nylon for long-term durability in a marine environment, and the housing is vented to keep water from accumulating inside the fender tube, which helps extend the service life of both the hanger and the fender. Internal teeth grip the rope securely once the two halves of the hanger are closed around it, holding the fender at the height you set on the line. The 1085 is sold as a pack of three, giving you enough hangers to outfit multiple fenders or keep spares on hand. While designed for Taylor Made fenders, the hanger is also compatible with fenders from other brands as long as the center tube is small enough for the two halves to close firmly together. It is finished in white to blend with typical fender and hull colors.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1085\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection-molded reinforced nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 3 fender hangers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Tube Compatibility:\u003c\/strong\u003e 0.75 inch (3\/4 inch) internal diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Diameter Compatibility:\u003c\/strong\u003e Up to 0.375 inch (3\/8 inch) diameter rope\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVenting:\u003c\/strong\u003e Vented to prevent water accumulation in the fender tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011949677\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Taylor Made fenders with 0.75-inch internal diameter tubing and rope up to 0.375 inch in diameter. Also compatible with fenders from other brands provided the center tube is small enough for the hanger halves to close firmly together.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made 1085 Big B Fender Hanger used for?\u003c\/strong\u003e The Taylor Made Products 1085 is a rope lock that clips onto a fender's hanging line and grips the rope so the fender stays at the height you set, rather than sliding up and down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rope diameter does the 1085 fender hanger fit?\u003c\/strong\u003e It fits rope up to 0.375 inch (3\/8 inch) in diameter; the internal teeth grip the rope once the two halves of the 1085 are closed around it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 1085 fit any boat fender?\u003c\/strong\u003e It is designed for Taylor Made fenders with 0.75-inch internal diameter tubing, and it is also compatible with fenders from other brands as long as the center tube is small enough for the hanger's two halves to close firmly together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fender hangers come in a pack?\u003c\/strong\u003e The Taylor Made 1085 is sold in a pack of three fender hangers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 1085 fender hanger made from?\u003c\/strong\u003e It is made of injection-molded, reinforced nylon, chosen for long-term durability in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the fender hanger vented?\u003c\/strong\u003e The 1085 is vented to prevent water from accumulating inside the fender tube, which helps the hanger and fender last longer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does one fender hanger weigh?\u003c\/strong\u003e Each Taylor Made 1085 fender hanger weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Taylor Made 1085 fender hanger?\u003c\/strong\u003e It is white, matching the color of most fenders and hull trim.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1085 easy to install on an existing fender line?\u003c\/strong\u003e Yes, the 1085 clips onto the rope by closing its two nylon halves around the line at the desired height, gripping via internal teeth without needing tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1085 genuine Taylor Made Products or aftermarket?\u003c\/strong\u003e The 1085 is a genuine Taylor Made Products part, identified by manufacturer part number 1085 and UPC 040011949677.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989664772315,"sku":"NAT-1085","price":13.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__19624.1757597288.500.750.jpg?v=1785189089"},{"product_id":"taylor-made-1098-quick-knot-fender-hanger-for-1-4-line-blue-molded-nylon-4-pack","title":"Taylor Made Quick Knot Fender Hanger for 1\/4 Inch Line, Blue Nylon, 4-Pack (1098)","description":"\u003cp\u003eThe Taylor Made Quick Knot Fender Hanger lets you hang boat fenders on 1\/4 inch line without tying a knot. Each hanger is a one-piece molded nylon part with built-in teeth inside the body: insert the fender line into the hanger, loop the hanger over a hook, railing, or lifeline, thread the line back through the hanger, and pull to secure. The result is a quick, adjustable hang that holds the fender at the height you want and releases just as easily when it is time to stow the fender.\u003c\/p\u003e\u003cp\u003eMolded from durable, corrosion-proof nylon in blue, each hanger measures 2-1\/8 inches by 1-1\/8 inches by 3\/4 inches and is built to stand up to sun, saltwater, and repeated use on hard surfaces such as fiberglass, metal, and wood docks or decks. Part number 1098 is sold as a 4-pack, giving you enough hangers to rig a full set of fenders along one rail or lifeline. Because no knot-tying is required, fenders can be raised, lowered, or removed in seconds, making this a practical upgrade for boaters who reposition fenders often when docking, rafting up, or fendering off at different heights.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1098\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fender Hanger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 4 per pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Diameter:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (each hanger):\u003c\/strong\u003e 2-1\/8 inches x 1-1\/8 inches x 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Hanging Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Surfaces:\u003c\/strong\u003e Hard surfaces (fiberglass, metal, wood docks, decks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011010988\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Quick Knot Fender Hanger used for?\u003c\/strong\u003e It lets you hang a boat fender from a rail, lifeline, or hook without tying a knot in the fender line, so the fender can be raised, lowered, or removed in seconds. Part number 1098 is designed for 1\/4 inch line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hangers come in a pack?\u003c\/strong\u003e Taylor Made part number 1098 is sold as a 4-pack of fender hangers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat line diameter does the 1098 fender hanger fit?\u003c\/strong\u003e The 1098 fender hanger is sized for 1\/4 inch line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the fender hanger made from?\u003c\/strong\u003e Each hanger is molded from a single piece of durable, corrosion-proof blue nylon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Taylor Made 1098 fender hanger?\u003c\/strong\u003e The 1098 fender hanger is blue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is each fender hanger?\u003c\/strong\u003e Each Taylor Made 1098 fender hanger measures 2-1\/8 inches by 1-1\/8 inches by 3\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 4-pack weigh?\u003c\/strong\u003e The 4-pack of 1098 fender hangers weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you install the fender hanger, and do you need tools?\u003c\/strong\u003e No tools are needed: insert the fender line into the hanger, loop the hanger over a rail, lifeline, or hook, thread the line back through the hanger, and pull to secure. Installation takes only seconds per fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the fender hanger hold up outdoors?\u003c\/strong\u003e Yes, the 1098 hanger's nylon construction is corrosion-proof and suited to ongoing sun and saltwater exposure on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces can the fender hanger mount to?\u003c\/strong\u003e The 1098 fender hanger is recommended for hard surfaces such as fiberglass, metal, and wood docks or decks, in addition to rails and lifelines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Taylor Made product?\u003c\/strong\u003e Yes, part number 1098 is a genuine Taylor Made fender hanger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 1098 fender hanger?\u003c\/strong\u003e Ordering part number 1098 gets you one 4-pack of fender hangers; no fenders or lines are included.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989664870619,"sku":"NAT-1098","price":20.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__11545.1763741542.500.750.jpg?v=1785188963"},{"product_id":"taylor-made-1097-rail-lifeline-fender-bracket-for-7-8-1-rails-or-1-4-lifelines-pair","title":"Taylor Made Products Rail\/Lifeline Fender Bracket, Fits 7\/8 to 1 Inch Rails or 1\/4 Inch Max Lifelines, Pair (Part 1097)","description":"\u003cp\u003eThis Taylor Made Products fender bracket set lets you clamp a boat fender directly onto a rail or lifeline and adjust its hanging height in seconds. Each bracket uses a double-locking clamp design that grips 7\/8 inch to 1 inch diameter railings or lifelines up to 1\/4 inch in diameter, so the fender can be repositioned up or down without ever detaching it from the boat. That makes it easy to reset fender height on the fly when docking, rafting up, or moving between different height piers.\u003c\/p\u003e\u003cp\u003eThe bracket body is molded from durable nylon for corrosion resistance in a marine environment, with stainless steel fastener hardware for long-term durability. Installation is straightforward: feed the fender line through the hanger, clamp the bracket around the rail or lifeline, and pull the line to the desired height. Part number 1097 is sold as a pair (2 pieces), enough to hang one fender per side or two fenders along a single rail run.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1097\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 2 (sold in pairs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Compatibility:\u003c\/strong\u003e 7\/8 inch to 1 inch diameter railings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifeline Compatibility:\u003c\/strong\u003e Up to 1\/4 inch diameter lifelines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7.5 inches L x 5.13 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Type:\u003c\/strong\u003e Double-locking clamp, tool-free height adjustment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Watercraft\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rail or lifeline does the Taylor Made Products 1097 bracket fit?\u003c\/strong\u003e Part number 1097 mounts to railings that are 7\/8 inch to 1 inch in diameter, or lifelines up to 1\/4 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many brackets come in a package of part 1097?\u003c\/strong\u003e This item is sold in pairs, so one package of Taylor Made Products 1097 includes 2 fender brackets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fender bracket made of?\u003c\/strong\u003e The bracket body is molded nylon, paired with stainless steel fastener hardware, for a durable, corrosion-resistant fit in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I adjust the fender height without removing the bracket?\u003c\/strong\u003e Yes, the 1097 bracket uses a double-locking clamp design that lets you reposition the fender height by pulling the line, without detaching the clamp from the rail or lifeline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you install the 1097 fender bracket?\u003c\/strong\u003e Feed the fender line through the hanger, clamp the nylon bracket around the boat's rail or lifeline, then pull the line to the height you want. No additional tools are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Taylor Made Products 1097 bracket?\u003c\/strong\u003e It is white, matching typical marine hardware finishes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the bracket?\u003c\/strong\u003e Each pair of part 1097 measures 7.5 inches by 5.13 inches and weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part 1097 meant for one fender or two?\u003c\/strong\u003e Since it is sold as a pair of brackets, part 1097 is typically used to hang one fender per side, or two fenders if mounted individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this bracket work on a lifeline instead of a solid rail?\u003c\/strong\u003e Yes, the Taylor Made Products 1097 bracket clamps onto either a 7\/8 inch to 1 inch rail or a lifeline up to 1\/4 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the bracket include any hardware?\u003c\/strong\u003e Fastener hardware included with the 1097 bracket is stainless steel, matched to the molded nylon clamp body.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989664903387,"sku":"NAT-1097","price":22.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2__73496.1757537429.500.750_91af3581-7be5-48d2-9f3b-e9c57e868506.jpg?v=1785188133"},{"product_id":"taylor-made-fender-loc-boat-fender-lines-2-pack-3-8-x-6-white-braided-polypropylene-pre-spliced-adjustable-dock-fender-rope","title":"Taylor Made Products Fender Loc Fender Lines 11311, 3\/8 Inch x 6 Feet, White, 2-Pack","description":"\u003cp\u003eThe Taylor Made Products Fender Loc Fender Lines (part number 11311) are adjustable boat fender lines built to hold your fenders at the exact height you need when docking, mooring, or rafting up. Sold as a pair, each line measures 3\/8 inch in diameter by 6 feet long, giving you enough length to fine-tune fender placement along the hull. The lines are made from braided polypropylene rope that resists fading and rot from sun and water exposure, and the braided construction is designed not to kink, so you can adjust fender height quickly without fighting tangled rope or stubborn knots.\u003c\/p\u003e\u003cp\u003eEach Fender Loc line is pre-spliced with a professionally finished loop end, so it is ready to tie off to a fender and cleat as soon as it is out of the package, with no need to splice or whip the rope yourself. The lines are finished in white to match a wide range of fenders and hull colors. Because they are sold in pairs, one package outfits both fenders on one side of the boat, or you can use one package per fender pair as you rotate them around the boat for docking on either side.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11311\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fender Line Set, 2-Pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Braided polypropylene rope\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 lines per package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Finish:\u003c\/strong\u003e Pre-spliced, professionally finished loop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e Hook and loop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long are the Taylor Made Products Fender Loc fender lines?\u003c\/strong\u003e Each line in part number 11311 measures 6 feet long and 3\/8 inch in diameter, giving enough length to adjust fender height for most boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fender lines come in this package?\u003c\/strong\u003e This package includes 2 fender lines, sold as a matched pair, so one purchase outfits a pair of fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the Fender Loc lines made from?\u003c\/strong\u003e The 11311 fender lines are made from braided polypropylene rope, chosen for its resistance to fading and rot in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these fender lines come pre-spliced?\u003c\/strong\u003e Yes, the Taylor Made Products 11311 lines are pre-spliced with a professionally finished loop end, so they are ready to tie off without any splicing needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill these fender lines kink when I adjust them?\u003c\/strong\u003e No, the braided polypropylene construction of the 11311 fender lines is designed to resist kinking, making height adjustments easier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the Fender Loc fender lines?\u003c\/strong\u003e Part number 11311 is finished in white, a neutral color that matches a wide range of fenders and hulls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a package of Fender Loc lines weigh?\u003c\/strong\u003e A 2-pack of the Taylor Made Products 11311 fender lines weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these fender lines resistant to sun and weather damage?\u003c\/strong\u003e Yes, the braided polypropylene rope used in the 11311 fender lines is fade-resistant and rot-resistant for extended outdoor use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the Fender Loc lines for docking, mooring, and rafting?\u003c\/strong\u003e Yes, the 11311 fender lines are designed for general fender adjustment tasks including docking, mooring, and rafting up alongside other boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs any hardware included with the fender lines?\u003c\/strong\u003e The Taylor Made Products 11311 fender lines include stainless steel hardware as part of the line assembly.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989664936155,"sku":"NAT-11311","price":16.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71E_5y7dXOS.jpg?v=1784486482"},{"product_id":"taylor-made-products-1108-rail-fender-hanger-jam-cleat-fender-clip-for-rails-up-to-1-inch-white-nylon","title":"Taylor Made Products 1108 Fender Hanger, Clip Rail Mount for Rails Up to 1 Inch, White","description":"\u003cp\u003eThe Taylor Made Products 1108 is a boater's clothespin-style fender hanger that clips directly onto rails up to 1 inch in diameter, letting you adjust fender height in seconds and lock it firmly in place without tying a single knot. It is molded from a single piece of high impact, UV resistant nylon, so there are no hinges or metal springs to corrode or seize up after seasons of sun and saltwater exposure.\u003c\/p\u003e\u003cp\u003eThe hanger accepts fender lines up to 1\/2 inch and uses a built-in jam cleat to grip the rope once it is set, so the fender stays at the height you chose even while docking, tying up, or underway. Because it mounts on rails rather than requiring a permanent through-hole installation, it is easy to add, reposition, or remove without modifying the boat, and it works equally well for holding fenders or as a general-purpose line cleat along a rail.\u003c\/p\u003e\u003cp\u003eThis fender hanger fits any rail up to 1 inch in diameter, making it compatible with most standard boat rail systems, and is finished in white to blend in with typical boat rail and hull finishes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1108\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fender Hanger \/ Rope Clip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High impact, UV resistant nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Compatibility:\u003c\/strong\u003e Up to 1 inch rails\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope\/Line Size:\u003c\/strong\u003e Up to 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5 inches (L) x 1.5 inches (H) x 0.5 inches (W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Clip rail mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Jam cleat lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011984371\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat rail size does the Taylor Made Products 1108 fender hanger fit?\u003c\/strong\u003e The Taylor Made Products 1108 clips onto rails up to 1 inch in diameter, making it suited to most standard boat rail systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size rope or line works with this fender hanger?\u003c\/strong\u003e It accepts fender lines up to 1\/2 inch in diameter, held in place by a built-in jam cleat once the height is set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need tools to install the 1108 fender hanger?\u003c\/strong\u003e No tools are needed. The 1108 is a clip-on design that mounts directly to the rail by hand, with no drilling or hardware required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the fender hanger made from?\u003c\/strong\u003e It is made from a single piece of injection molded, high impact, UV resistant nylon, which resists cracking and fading from sun and saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fender hanger use knots to hold the line in place?\u003c\/strong\u003e No knots are needed. The Taylor Made Products 1108 locks the line in place with a jam cleat, so fender height can be adjusted and reset quickly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 1108 fender hanger available in?\u003c\/strong\u003e The 1108 is finished in white, matching typical boat rail and hull colors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the fender hanger?\u003c\/strong\u003e The Taylor Made Products 1108 measures 5 inches long, 1.5 inches high, and 0.5 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the fender hanger weigh?\u003c\/strong\u003e It weighs 0.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender hanger be used for lines other than fenders?\u003c\/strong\u003e Yes, because it functions as a rail-mounted rope clip with a jam cleat lock, the 1108 can also be used to secure other lines up to 1\/2 inch along a rail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a one-piece or multi-part design?\u003c\/strong\u003e The Taylor Made Products 1108 is a solid one-piece construction, with no separate springs, pins, or hinges to lose or wear out.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989665001691,"sku":"NAT-1108","price":8.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__59425.1763741543.500.750.jpg?v=1785188267"},{"product_id":"taylor-made-fender-loc-fender-lines-3-8-x-6-blue-pair-adjustable-boat-fender-lines-with-pre-spliced-loop-mpn-11312","title":"Taylor Made Fender Loc Adjustable Boat Fender Lines, 3\/8 Inch x 6 Feet, Blue, Pair","description":"\u003cp\u003eThe Taylor Made Fender Loc Fender Lines are adjustable nylon lines used to hang and position boat fenders at the correct height when docking, mooring, or rafting up. Each line measures 3\/8 inch in diameter by 6 feet long and is pre-spliced with a professionally finished end and a built-in loop, so you can secure a fender and adjust its height without tying and untying knots every time you dock. The nylon construction resists fading and will not kink, holding up to repeated sun and water exposure over time. A stainless steel hardware component at the tie-off point adds durability at the point of wear.\u003c\/p\u003e\u003cp\u003eThese lines are sold as a pair (2 fender lines per package) in blue, a color designed to coordinate with matching Taylor Made fenders and boating accessories. They are built for general watercraft use and work with fenders on boats of varying sizes, letting you quickly re-set fender height as freeboard or dock conditions change.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11312\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fender Line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type:\u003c\/strong\u003e Pre-spliced end with loop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 fender lines (sold in pairs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011115027\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Watercraft (universal fit)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Taylor Made 11312 fender line?\u003c\/strong\u003e Each Taylor Made 11312 fender line measures 6 feet long and 3\/8 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many lines come in this package?\u003c\/strong\u003e Taylor Made part number 11312 is sold as a pair, so the package includes 2 fender lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are these fender lines made from?\u003c\/strong\u003e The 11312 fender lines are made from nylon, which resists fading and will not kink with regular use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these fender lines fit any boat?\u003c\/strong\u003e Yes, the Taylor Made 11312 fender lines are designed for general watercraft use and are not limited to a specific boat make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the ends already finished, or do I need to splice them myself?\u003c\/strong\u003e Each line in the 11312 set is pre-spliced with a professionally finished end and built-in loop, so no splicing is required before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I adjust the height of my fenders with these lines?\u003c\/strong\u003e Yes, the built-in loop on each Taylor Made 11312 line lets you adjust fender height for docking, mooring, or rafting without retying knots.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are these fender lines?\u003c\/strong\u003e Part number 11312 is finished in blue to coordinate with matching Taylor Made fenders and accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this product weigh?\u003c\/strong\u003e The Taylor Made 11312 fender line set weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there any metal hardware on the line?\u003c\/strong\u003e Yes, the 11312 fender lines include a stainless steel hardware component at the tie-off point for added durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill these lines hold up to sun and saltwater exposure?\u003c\/strong\u003e The nylon construction of the 11312 fender lines is designed to resist fading and hold up against regular marine environment exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The UPC for the Taylor Made 11312 fender line pair is 040011115027.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989665231067,"sku":"NAT-11312","price":14.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/715cG1TDK2L.jpg?v=1784486495"},{"product_id":"taylor-made-fender-loc-fender-lines-3-8-x-6-mpn-11315-cranberry-pair-adjustable-braided-dock-fender-rope","title":"Taylor Made Fender Loc Fender Lines, 3\/8 Inch D x 6 Foot L, Cranberry, Pair","description":"\u003cp\u003eTaylor Made Fender Loc Fender Lines are adjustable boat fender lines built to hold your fenders at the exact height you need when docking, mooring, or rafting up. Each line measures 3\/8 inch in diameter by 6 feet long and is constructed from durable polypropylene rope that is fade resistant, rot resistant, and engineered to resist kinking, so you can adjust fender height quickly without fighting stubborn knots.\u003c\/p\u003e\u003cp\u003eEvery line is pre-spliced with a built-in loop and a professionally finished end, giving you a secure, adjustable tie-off point that is ready to use right out of the package. The lines are finished in Cranberry, part of Taylor Made's True Color color-matching system designed to coordinate with Taylor Made fenders and other boating accessories. Sold as a pair, these fender lines are a simple, reliable way to keep your fenders positioned correctly and protect your boat's hull from rubbing against docks, pilings, and other vessels.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8 inch diameter x 6 feet length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Cranberry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 fender lines (sold as a pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e RV, Watercraft\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the Taylor Made Fender Loc Fender Lines?\u003c\/strong\u003e Taylor Made part number 11315 measures 3\/8 inch in diameter by 6 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fender lines come in a package?\u003c\/strong\u003e Part number 11315 is sold as a pair, giving you two fender lines per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are these fender lines made from?\u003c\/strong\u003e They are made from polypropylene rope, chosen for its fade resistance and resistance to rot in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill these fender lines kink over time?\u003c\/strong\u003e No, the polypropylene construction of the Taylor Made Fender Loc lines is designed specifically to resist kinking so adjustments stay quick and easy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the fender lines come pre-spliced?\u003c\/strong\u003e Yes, each Taylor Made Fender Loc line (part 11315) is pre-spliced with a built-in loop and a professionally finished end, ready to tie off without additional work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this fender line set?\u003c\/strong\u003e This set is finished in Cranberry, part of Taylor Made's True Color color-matching lineup for coordinating with fenders and other boat accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the length be adjusted after installation?\u003c\/strong\u003e Yes, the built-in loop on each Fender Loc line lets you adjust the height of your fender easily without retying knots.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of this product?\u003c\/strong\u003e The Taylor Made Fender Loc Fender Lines (part 11315) weigh 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this product used for?\u003c\/strong\u003e These lines are used to hang and adjust boat fenders at the correct height for docking, mooring, or rafting alongside other boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this compatible with any boat fender?\u003c\/strong\u003e Part 11315 is a general-purpose fender line intended for use with standard boat fenders and is not limited to a specific fender model.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989665362139,"sku":"NAT-11315","price":22.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81gtOnrapUS.jpg?v=1784486503"},{"product_id":"taylor-made-fender-loc-fender-lines-3-8-x-6-black-adjustable-pre-spliced-boat-fender-rope-pair-mpn-11313","title":"Taylor Made Fender Loc Fender Lines 3\/8 Inch x 6 Feet, Polypropylene, Black, Pair - 11313","description":"\u003cp\u003eThe Taylor Made Fender Loc Fender Lines (part number 11313) are pre-spliced, adjustable tie-off lines designed to secure boat fenders at the correct height along a dock, piling, or another boat when rafting up. Each line has a built-in loop and a professionally finished end, so there is no knot-tying involved: the loop slips over the fender and the line adjusts to set the height, then locks in place for a secure hold. This makes it fast to raise or lower fenders as water levels, tide, or dock height change.\u003c\/p\u003e\u003cp\u003eEach line is made from polypropylene braided rope, which resists fading and will not kink, so adjustments stay smooth over repeated use. The lines are black and are sized to fit and match Taylor Made fenders. This listing includes two 6 foot lines, each 3\/8 inch in diameter, giving enough length to handle most fender height adjustments in a single package.\u003c\/p\u003e\u003cp\u003eFender Loc Fender Lines work with all types of fenders, not just Taylor Made brand fenders, making them a straightforward upgrade or replacement for worn, frayed, or knotted fender lines on any boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8 inch diameter x 6 feet length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Fender Line (2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011115034\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Taylor Made Fender Loc Fender Lines 11313?\u003c\/strong\u003e This package includes two 6 foot fender lines, each 3\/8 inch in diameter, for part number 11313.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill these fender lines fit fenders from other brands?\u003c\/strong\u003e Yes, the Fender Loc built-in loop works on all types of fenders, not just Taylor Made fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to tie knots to use the Fender Loc lines?\u003c\/strong\u003e No knot-tying is required. Each line has a built-in loop and a pre-spliced, professionally finished end, so you simply loop it onto the fender and adjust for height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the Taylor Made 11313 fender lines made from?\u003c\/strong\u003e They are made from polypropylene braided rope, which resists fading and will not kink during adjustment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is each fender line in part number 11313?\u003c\/strong\u003e Each line measures 3\/8 inch in diameter by 6 feet long, and two lines are included in the pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are these fender lines?\u003c\/strong\u003e The Taylor Made Fender Loc Fender Lines 11313 are black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 11313 fender line set weigh?\u003c\/strong\u003e The pair of fender lines weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I adjust the fender height after tying off?\u003c\/strong\u003e Yes, the built-in loop design on the 11313 fender lines allows the fender height to be readjusted at the dock without retying a knot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these fender lines pre-spliced or do they need finishing?\u003c\/strong\u003e They come pre-spliced with a professionally finished end, ready to use out of the package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fender lines come in one order of 11313?\u003c\/strong\u003e One order of the Taylor Made Fender Loc Fender Lines 11313 includes two 6 foot lines.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989665394907,"sku":"NAT-11313","price":14.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71-4uxOLv-L.jpg?v=1784486504"},{"product_id":"taylor-made-11316-fender-loc-adjustable-fender-lines-3-8-x-6-hunter-green-pair","title":"Taylor Made Fender Loc Fender Lines, 3\/8 Inch x 6 Foot, Hunter Green, Sold in Pairs","description":"\u003cp\u003eThe Taylor Made Fender Loc Fender Lines are adjustable boat fender lines built to hold your fenders at the right height when docking, mooring, or rafting. Each line measures 3\/8 inch in diameter by 6 feet long and is made from durable polypropylene braided rope that is fade resistant, rot resistant, and will not kink, so it stays easy to adjust even after repeated use in the marine environment. Every line is pre-spliced with a built-in loop and a professionally finished end, allowing a quick, secure tie-off without fumbling with knots when you need to raise or lower a fender in a hurry. Sold in pairs, these lines are color-matched in Hunter Green so they blend in with your fenders and other boating accessories rather than standing out as mismatched hardware. Hardware components are stainless steel for corrosion resistance around saltwater and freshwater alike. Because the lines are fully adjustable along their 6-foot length, they work with a wide range of fender sizes and boat freeboard heights rather than being limited to one specific fender model. This makes them a straightforward upgrade or replacement for worn, stiff, or mismatched fender lines on any boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11316\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Fender Loc Fender Lines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8 inch diameter x 6 feet length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Hunter Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 2 (sold in pairs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011115065\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e Loop\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the Taylor Made 11316 fender lines?\u003c\/strong\u003e Each line in the Taylor Made 11316 Fender Loc set measures 3\/8 inch in diameter by 6 feet long, giving enough length to adjust for different fender heights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many lines come in this set?\u003c\/strong\u003e The 11316 set includes 2 fender lines, sold as a matched pair in Hunter Green.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are these fender lines made from?\u003c\/strong\u003e They are made from polypropylene braided rope, chosen for its fade resistance and resistance to kinking and rot in marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill these lines fit any boat fender?\u003c\/strong\u003e Yes, the 3\/8 inch x 6 foot adjustable design works with a wide range of fender sizes since the length is adjustable to set the height you need rather than being fixed to one fender model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the lines come pre-spliced or do I need to tie my own loop?\u003c\/strong\u003e The Taylor Made 11316 lines are pre-spliced with a built-in loop and a professionally finished end, so they are ready to tie off without any additional splicing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this fender line set?\u003c\/strong\u003e This set is Hunter Green, matched using Taylor Made's color-matching process so the lines blend with Hunter Green fenders and boating accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the hardware on these lines rust resistant?\u003c\/strong\u003e The hardware on the 11316 fender lines is stainless steel, which resists corrosion in both saltwater and freshwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much do these fender lines weigh?\u003c\/strong\u003e The Taylor Made 11316 Fender Loc Fender Lines weigh 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these lines easy to adjust once installed?\u003c\/strong\u003e Yes, the polypropylene construction will not kink, so raising or lowering the fender along the line stays quick and does not require untying knots.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part number 11316?\u003c\/strong\u003e Ordering 11316 gets you 2 Hunter Green fender lines, each 3\/8 inch by 6 feet, with the loop and finished end already spliced in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan these fender lines be used in both saltwater and freshwater?\u003c\/strong\u003e Yes, the polypropylene rope and stainless steel hardware on the 11316 set are designed to hold up in the marine environment generally, including saltwater use.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989665427675,"sku":"NAT-11316","price":14.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81wVXKoWFoS.jpg?v=1784486508"},{"product_id":"taylor-made-11317-fender-loc-fender-lines-3-8-x-6-navy-pre-spliced-adjustable-boat-fender-line-pair","title":"Taylor Made Products Fender Loc Fender Lines, 3\/8 Inch x 6 Foot, Navy, Sold as a Pair","description":"\u003cp\u003eThe Taylor Made Products Fender Loc Fender Lines give boaters an adjustable, rot-resistant way to hang fenders at exactly the height needed for docking, mooring, or rafting. Each line measures 3\/8 inch in diameter by 6 feet long, made from tough polypropylene rope that resists fading and will not kink, so height adjustments stay quick and snag-free even after repeated use in the marine environment. Every line is pre-spliced with a professionally finished loop end, letting you secure and adjust the fender without tying and untying knots. The Navy color is produced using Taylor Made's True Color matching technology, so the lines coordinate with matching Taylor Made fenders and other boating accessories in the same color. Fender Loc Fender Lines are sold as a pair (two lines per package), giving you enough rope to outfit both sides of a typical fender setup. Hardware components used in the line construction are stainless steel for added corrosion resistance in the marine environment. These lines are designed to hold up against sun, saltwater, and everyday handling, protecting your boat's hull and your fenders season after season.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11317\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Navy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 (sold as a pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Finish:\u003c\/strong\u003e Pre-spliced, professionally finished loop end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011115072\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the Taylor Made Fender Loc Fender Lines?\u003c\/strong\u003e Each line in part number 11317 measures 3\/8 inch in diameter by 6 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many lines come in a package?\u003c\/strong\u003e The Taylor Made Fender Loc Fender Lines (11317) are sold as a pair, so you receive two lines per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 11317?\u003c\/strong\u003e Part number 11317 is Navy, produced with Taylor Made's True Color matching technology for a consistent color match to Navy fenders and accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the fender lines made from?\u003c\/strong\u003e These lines are made from polypropylene rope, chosen for its fade resistance and resistance to kinking in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the lines come pre-spliced?\u003c\/strong\u003e Yes, the Fender Loc Fender Lines have a pre-spliced, professionally finished loop end, so no additional splicing or knot-tying is needed to attach them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I adjust the fender height with these lines?\u003c\/strong\u003e The pre-spliced loop end allows you to adjust and re-secure the line quickly without untying knots, letting you set the fender at the height you need for docking, mooring, or rafting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these fender lines resistant to sun and saltwater damage?\u003c\/strong\u003e Yes, the polypropylene construction used in part number 11317 is fade-resistant and rot-resistant, built to hold up in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of a package of Fender Loc Fender Lines?\u003c\/strong\u003e A package of Taylor Made Fender Loc Fender Lines (11317) weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is used on these fender lines?\u003c\/strong\u003e The fender lines use stainless steel hardware for corrosion resistance in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill these lines fit any fender?\u003c\/strong\u003e The Fender Loc Fender Lines attach via a loop end and are designed to work with standard boat fenders that use a line for height adjustment; the 3\/8 inch by 6 foot Navy line is part number 11317.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with part number 11317?\u003c\/strong\u003e Part number 11317 includes two Fender Loc Fender Lines, each 3\/8 inch by 6 feet in Navy.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989665460443,"sku":"NAT-11317","price":40.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81FYMR0FyBL.jpg?v=1784486511"},{"product_id":"taylor-made-products-1139-pontoon-rail-fender-adjuster-4-pack-fits-1-to-1-1-4-square-rails","title":"Taylor Made Products 1139 Pontoon Boat Rail Fender Adjuster, Fits 1 Inch to 1-1\/4 Inch Square Rails, Pack of 4","description":"\u003cp\u003eThe Taylor Made Products 1139 Pontoon Rail Fender Adjuster is a clamp-on hanger designed specifically for pontoon boats, letting you position and reposition fender lines quickly along square rail tubing. Each adjuster clamps securely over 1 inch and 1-1\/4 inch square pontoon rails and accepts fender lines up to 3\/8 inch, so there is no need to tie and untie awkward knots every time you dock, moor, or raft up alongside another boat. Simply clamp the adjuster around the rail and slide it to the height you need for your fenders.\u003c\/p\u003e\u003cp\u003eBuilt from durable ABS plastic, the 1139 adjuster is designed to withstand sun, moisture, and everyday marine conditions, and it resists chemicals and physical impacts while protecting your pontoon's rail and hull from scuffing. The unit ships in a white finish and is sold as a set of 4 adjusters per pack, so a single package outfits all four corners or fender points on a typical pontoon boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1139\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Pontoon rail fender adjuster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 4 adjusters per pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Acrylonitrile Butadiene Styrene (ABS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 8 x 8 x 1.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Fitment:\u003c\/strong\u003e Fits 1 inch and 1-1\/4 inch square pontoon rails\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Line Capacity:\u003c\/strong\u003e Accepts fender lines up to 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011115126\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Pontoon Rail Fender Adjuster (4)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 inch square pontoon rails\u003c\/li\u003e\n\u003cli\u003e1-1\/4 inch square pontoon rails\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rails does the Taylor Made 1139 fender adjuster fit?\u003c\/strong\u003e The Taylor Made Products 1139 clamps onto square pontoon rails measuring 1 inch or 1-1\/4 inch, covering the two most common pontoon rail sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many adjusters come in a pack?\u003c\/strong\u003e Part number 1139 is sold as a set of 4 adjusters per pack, enough to outfit multiple fender positions on a pontoon boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum fender line thickness the 1139 can hold?\u003c\/strong\u003e The 1139 accepts fender lines up to 3\/8 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Taylor Made 1139 fender adjuster made from?\u003c\/strong\u003e It is made from Acrylonitrile Butadiene Styrene (ABS), a durable plastic chosen for resistance to weather, chemicals, and impact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1139 require tools to install?\u003c\/strong\u003e No tools are needed; the adjuster clamps directly around the square pontoon rail by hand and can be repositioned the same way.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I adjust fender height without retying my dock lines?\u003c\/strong\u003e Yes, the Taylor Made 1139 lets you reposition fender height by sliding the adjuster along the rail, eliminating the need to untie and retie fender line knots.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 1139 fender adjuster?\u003c\/strong\u003e The Taylor Made 1139 is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 1139 packaging?\u003c\/strong\u003e The Taylor Made 1139 pontoon rail fender adjuster (4-pack) measures 8 x 8 x 1.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a pack of Taylor Made 1139 adjusters weigh?\u003c\/strong\u003e A pack of 4 Taylor Made 1139 fender adjusters weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 1139 work on rails other than square pontoon rails?\u003c\/strong\u003e The Taylor Made 1139 is designed specifically to clamp over 1 inch and 1-1\/4 inch square pontoon rails.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 1139?\u003c\/strong\u003e Each order of the Taylor Made 1139 includes 4 pontoon rail fender adjusters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1139 resistant to sun and weather exposure?\u003c\/strong\u003e Yes, the ABS plastic construction of the 1139 is built to withstand outdoor marine weather conditions and resist chemicals and physical impacts.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989665493211,"sku":"NAT-1139","price":24.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__52877.1763741543.500.750.jpg?v=1785188111"},{"product_id":"taylor-made-11318-fender-loc-adjustable-fender-lines-3-8-x-6-sand-pair","title":"Taylor Made Fender Loc Fender Lines, 3\/8 Inch x 6 Feet, Sand (Pair)","description":"\u003cp\u003eTaylor Made Fender Loc Fender Lines are adjustable fender lines built to protect your boat's hull at the dock, mooring, or when rafting up alongside another vessel. Each pair measures 3\/8 inch in diameter by 6 feet in length, giving you enough rope to adjust fender height to match varying dock and piling heights. The lines are made from solid braid polypropylene rope, a material chosen for its resistance to fading and its ability to hold up against sun, saltwater, and everyday wear in the marine environment. The rope will not kink, which makes raising or lowering your fenders quick instead of a fight with a stubborn knot.\u003c\/p\u003e\u003cp\u003eEach line is pre-spliced with a professionally finished loop end, so it is ready to tie off and adjust as soon as it is out of the package. This Sand colorway is designed to complement fenders and other boating accessories in a matching tone, so your dock lines look as finished as the rest of your setup. The set is sold as a pair, giving you a matched set of two lines for a typical two-fender setup. Taylor Made is a proud member of the Lippert family, a global manufacturer of engineered products for the marine, RV, automotive, and commercial vehicle industries.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11318\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8 inch diameter x 6 feet length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Sand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene solid braid rope\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 (sold as a pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type:\u003c\/strong\u003e Pre-spliced loop end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the Taylor Made Fender Loc Fender Lines, part number 11318?\u003c\/strong\u003e Part number 11318 measures 3\/8 inch in diameter by 6 feet in length per line, sold as a matched pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many lines come in one package of part number 11318?\u003c\/strong\u003e Two fender lines are included in each package of the Taylor Made Fender Loc Fender Lines 11318, enough for a typical two-fender setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is used for these fender lines?\u003c\/strong\u003e Polypropylene solid braid rope is used for the Taylor Made Fender Loc Fender Lines, chosen for its fade resistance and durability in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the rope kink when I adjust my fender height?\u003c\/strong\u003e No, the solid braid polypropylene construction of the Fender Loc lines is designed to resist kinking, making height adjustments quick and easy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the Fender Loc lines come pre-spliced?\u003c\/strong\u003e Yes, each Taylor Made Fender Loc line, part 11318, has a professionally finished, pre-spliced loop end ready for immediate use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 11318?\u003c\/strong\u003e Part number 11318 is the Sand color option in the Taylor Made Fender Loc Fender Lines lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these fender lines resistant to fading in the sun?\u003c\/strong\u003e Yes, the Taylor Made Fender Loc Fender Lines are fade resistant, helping the Sand color hold up under ongoing sun exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of one package of the Fender Loc Fender Lines?\u003c\/strong\u003e One package of Taylor Made Fender Loc Fender Lines, part 11318, weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan these lines be used for docking, mooring, and rafting?\u003c\/strong\u003e Yes, the Taylor Made Fender Loc Fender Lines 11318 are designed for docking, mooring, and rafting applications where adjustable fender height is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this rope resistant to rot from ongoing water exposure?\u003c\/strong\u003e Yes, the polypropylene rope used in the Taylor Made Fender Loc Fender Lines is rot resistant, suited to continual exposure in the marine environment.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989665755355,"sku":"NAT-11318","price":14.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/716smj_kFXL.jpg?v=1784486533"},{"product_id":"taylor-made-products-1089-ratcheting-boat-fender-hanger-strap-adjustable-6-24-black","title":"Taylor Made Products 1089 Ratcheting Boat Fender Hanger, Black, 3\/4 Inch Polyester Strap","description":"\u003cp\u003eThe Taylor Made Products 1089 is a ratcheting boat fender hanger strap that lets you hang a fender and dial in its exact height without tying a single knot. Built from 3\/4 inch polyester webbing with UV-resistant construction, the strap resists fraying, unwinding, and sun damage even with regular exposure on deck. A built-in ratchet mechanism gives you fast, precise height adjustment across a 6 inch to 24 inch range, which is especially useful when docking or rafting up alongside other boats where fender height needs frequent tweaking.\u003c\/p\u003e\u003cp\u003eTo use it, simply feed the strap around the boat's rail or lifeline and pass it through the eye of the fender for a secure hold, then ratchet it to the height you need. Stainless steel hardware on the ratchet mechanism adds corrosion resistance for long-term marine use. The strap is sold as a single unit in black and is compatible with 3\/8 inch diameter rope for fender lines that use a rope connection. Because it eliminates knot-tying, it is faster to set up and adjust than a traditional rope-and-cleat fender hanging method, and it holds its position securely once ratcheted in place. This is a straightforward, purpose-built accessory for boaters who want a quicker, more consistent way to hang and reposition fenders.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1089\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Ratcheting Boat Fender Hanger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-resistant polyester webbing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Width:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Range:\u003c\/strong\u003e 6 inches to 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Rope Diameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold as one strap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011114020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the adjustment range of the Taylor Made 1089 fender hanger?\u003c\/strong\u003e The Taylor Made Products 1089 ratcheting fender hanger adjusts from 6 inches to 24 inches, letting you set fender height quickly when docking or rafting up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the strap made from?\u003c\/strong\u003e It is made from 3\/4 inch UV-resistant polyester webbing, which resists fraying and unwinding even with sustained sun exposure on deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install the 1089 fender hanger?\u003c\/strong\u003e Feed the strap around the boat's rail or lifeline, pass it through the eye of the fender, and pull it into place, then use the ratchet mechanism to set the height. No knots or additional hardware are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the ratchet mechanism made of stainless steel?\u003c\/strong\u003e Yes, the Taylor Made 1089 uses stainless steel hardware in its ratchet mechanism for corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rope diameter is the 1089 compatible with?\u003c\/strong\u003e The Taylor Made Products 1089 is compatible with 3\/8 inch diameter rope.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many straps come in a package?\u003c\/strong\u003e The 1089 is sold as one strap per package, not a multi-pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Taylor Made 1089 fender hanger?\u003c\/strong\u003e It is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow wide is the fender hanger strap?\u003c\/strong\u003e The strap width on the Taylor Made 1089 is 3\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the strap need to be tied with knots?\u003c\/strong\u003e No knot-tying is needed. The 1089's ratchet design lets you feed the strap through the fender eye and lock in the height directly, which is faster than a traditional rope-and-knot setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made 1089 weigh?\u003c\/strong\u003e The Taylor Made Products 1089 weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the strap fray or unravel over time?\u003c\/strong\u003e No, the polyester webbing on the 1089 is UV-resistant and is designed not to fray or unwind with regular use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made 1089?\u003c\/strong\u003e The UPC for the Taylor Made Products 1089 ratcheting fender hanger is 040011114020.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989666017499,"sku":"NAT-1089","price":12.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__77198.1757596775.500.750.jpg?v=1785188036"},{"product_id":"attwood-11575-3-stainless-steel-boat-fender-lock-kit-twist-lock-fender-holder-pair-fits-lines-up-to-1-2-in","title":"Attwood Stainless Steel Fender Hooks 11575-3, Holds Rope up to 3\/8 Inch, Pair","description":"\u003cp\u003eThe Attwood 11575-3 Stainless Steel Fender Hooks give boaters a fast, secure way to hold mooring and fender lines anywhere on the boat or dock. Each hook accepts rope up to 3\/8 inch in diameter, making it suitable for typical fender lines and light mooring line without slipping loose. The hooks are stamped from stainless steel for corrosion resistance in the marine environment and finished with a polished surface that matches other stainless deck hardware.\u003c\/p\u003e\u003cp\u003eMounting is straightforward: each hook has two counter-sunk holes spaced 5\/8 inch apart, allowing it to sit flush against the mounting surface with flathead screws or bolts for a clean, low-profile install. The hooks are sold as a pair, so you can outfit both port and starboard sides, or set up two separate line-holding points, from a single package.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11575-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Diameter Capacity:\u003c\/strong\u003e Up to 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Holes:\u003c\/strong\u003e Two counter-sunk holes, 5\/8 inch apart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair (2 pieces)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1458 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 15 x 10 x 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697001870\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00022697001870\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum rope diameter the Attwood 11575-3 fender hooks can hold?\u003c\/strong\u003e The Attwood 11575-3 stainless steel fender hooks hold mooring or fender line up to 3\/8 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hooks come in the 11575-3 package?\u003c\/strong\u003e The 11575-3 is sold as a pair, so two stainless steel fender hooks are included in each package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the 11575-3 fender hooks made from?\u003c\/strong\u003e These hooks are stamped from stainless steel and finished with a polished surface, giving the Attwood 11575-3 good resistance to marine corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you mount the Attwood 11575-3 fender hooks?\u003c\/strong\u003e Each 11575-3 hook has two counter-sunk mounting holes spaced 5\/8 inch apart, so it can be installed flush with flathead screws or bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 11575-3 hooks be used anywhere on the boat or dock?\u003c\/strong\u003e Yes, the Attwood 11575-3 fender hooks are designed for holding mooring lines anywhere on the boat or dock, not just a single fixed location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 11575-3 weigh?\u003c\/strong\u003e The Attwood 11575-3 fender hooks weigh 0.1458 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 11575-3 come with mounting screws?\u003c\/strong\u003e The package includes the pair of stainless steel fender hooks; the counter-sunk holes are sized for standard mounting screws or bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish do the Attwood 11575-3 fender hooks have?\u003c\/strong\u003e The 11575-3 hooks have a polished stainless steel finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the Attwood 11575-3 fender hooks genuine Attwood parts?\u003c\/strong\u003e Yes, part number 11575-3 is a genuine Attwood stainless steel fender hook, not a generic substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 11575-3 fender hooks?\u003c\/strong\u003e The UPC for the Attwood 11575-3 stainless steel fender hooks is 022697001870.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989666345179,"sku":"ATT-11575-3","price":8.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__16727.1763741538.500.750.jpg?v=1785188240"},{"product_id":"taylor-made-products-2011-stainless-steel-fender-rack-holds-2-fenders-9-to-11-diameter","title":"Taylor Made Products Stainless Steel Fender Rack, Holds 2 Fenders 9 to 11 Inches, Part Number 2011","description":"\u003cp\u003eThe Taylor Made Products Fender Rack, part number 2011, is a stainless steel storage rack built to hold two boat fenders sized 9 to 11 inches while underway or in storage. Instead of leaving fenders loose on deck or hanging over the rail while running, this rack gives them a fixed, organized mounting point, keeping the deck clear and the fenders ready to grab when it is time to dock. Stainless steel construction resists the corrosion that marine hardware is constantly exposed to from saltwater spray, rain, and humidity, so the rack holds up to long-term outdoor use on a boat.\u003c\/p\u003e\u003cp\u003eThe rack is sized specifically for the 9 to 11 inch fender range, making it a straightforward match for boats running fenders in that size class. It mounts to a flat surface on the boat and cradles the fenders securely so they do not roll or shift with the motion of the water. For owners who want a clean, dedicated spot to stow a pair of fenders rather than tying them off individually, this two-fender unit is a simple, durable solution.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2011\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fender Rack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Capacity:\u003c\/strong\u003e 2 fenders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Size Compatibility:\u003c\/strong\u003e 9 to 11 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011322111\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many fenders does the Taylor Made Products fender rack hold?\u003c\/strong\u003e This Taylor Made Products fender rack, part number 2011, holds 2 fenders at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fenders fit this rack?\u003c\/strong\u003e Fenders in the 9 to 11 inch size range fit the Taylor Made Products fender rack, part number 2011.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fender rack made of?\u003c\/strong\u003e Stainless steel construction is used for the Taylor Made Products fender rack, part number 2011, so it resists corrosion in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the fender rack weigh?\u003c\/strong\u003e The Taylor Made Products fender rack, part number 2011, weighs 3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this rack designed for one fender or a pair?\u003c\/strong\u003e It is a 2-fender unit, meaning the Taylor Made Products rack, part number 2011, is built to hold a pair of fenders together in one mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this rack work with fenders smaller than 9 inches or larger than 11 inches?\u003c\/strong\u003e The Taylor Made Products fender rack, part number 2011, is sized for fenders between 9 and 11 inches; sizes outside that range are not specified for this rack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use a fender rack instead of hanging fenders over the rail?\u003c\/strong\u003e A dedicated rack like the Taylor Made Products part number 2011 keeps fenders stowed in a fixed spot rather than left loose or hanging, helping keep the deck organized.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this fender rack?\u003c\/strong\u003e The UPC for the Taylor Made Products fender rack, part number 2011, is 040011322111.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the stainless steel finish resistant to rust?\u003c\/strong\u003e Yes, the stainless steel used in the Taylor Made Products fender rack, part number 2011, is chosen to resist corrosion from saltwater and marine moisture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of boat hardware does this product fall under?\u003c\/strong\u003e The Taylor Made Products part number 2011 is classified as a fender holder, specifically a rack for storing boat fenders.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989668704475,"sku":"NAT-2011","price":257.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_f828b27d-fab0-41d4-ace4-329ea7a904a1.jpg?v=1785351794"},{"product_id":"taylor-made-products-9204n-premium-heavyweight-fender-cover-navy-fits-hull-gard-6-1-2-x-23-super-gard-5-1-2-x-20-and-big-b-6-x-15-fenders","title":"Taylor Made Fender Cover 9204N, Navy, Fits Hull-Gard 6-1\/2 x 23 Inch, Super Gard 5-1\/2 x 20 Inch, and Big B 6 x 15 Inch Fenders","description":"\u003cp\u003eThe Taylor Made Fender Cover 9204N is a heavyweight knit cover designed to protect your boat's fenders from abrasion, UV exposure, and general wear while docked or underway. Knit from 100% polyester, it is built to withstand marine elements and resist abrasion, with UV protection to guard against sun fade and material breakdown over time. The knit construction has a high degree of elasticity, allowing the cover to stretch snugly over the fender for a tight, secure fit that holds its shape season after season.\u003c\/p\u003e\u003cp\u003eThis cover is sized to fit the Hull-Gard fender at 6-1\/2 inches x 23 inches, as well as the Super Gard fender at 5-1\/2 inches x 20 inches and the Big B fender at 6 inches x 15 inches. It secures to the fender at both the top and bottom using an adjustable, high-strength polypropylene rope, keeping the cover in place through normal boating use. The 9204N is finished in Navy, one of the Taylor Made True Colors offered to match your boat's existing fender or hull color scheme.\u003c\/p\u003e\u003cp\u003eCare is simple: the cover can be washed in a washing machine using cold water and mild detergent, making upkeep straightforward for regular boat maintenance. It is designed for durability and made in the USA.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9204N\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Navy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Fender Sizes:\u003c\/strong\u003e 6-1\/2 inches x 23 inches (Hull-Gard), 5-1\/2 inches x 20 inches (Super Gard), 6 inches x 15 inches (Big B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e Adjustable polypropylene rope, top and bottom\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Heavyweight knit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat fender sizes does the Taylor Made 9204N cover fit?\u003c\/strong\u003e The 9204N fits the Hull-Gard fender at 6-1\/2 inches x 23 inches, the Super Gard fender at 5-1\/2 inches x 20 inches, and the Big B fender at 6 inches x 15 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 9204N?\u003c\/strong\u003e Part number 9204N is finished in Navy; the same fender cover is also offered in other Taylor Made True Colors for matching different boat color schemes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the fender cover made from?\u003c\/strong\u003e It is knit from 100% polyester, chosen for its abrasion resistance and UV protection against marine sun exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cover stay on the fender?\u003c\/strong\u003e An adjustable, high-strength polypropylene rope secures the 9204N cover at both the top and bottom of the fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cover be machine washed?\u003c\/strong\u003e Yes, the Taylor Made 9204N can be cleaned in a washing machine using cold water and mild detergent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the cover stretch out of shape over time?\u003c\/strong\u003e No, the knit construction has a high degree of elasticity for a tight fit and is designed to maintain its shape over many boating seasons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 9204N fender cover made in the USA?\u003c\/strong\u003e Yes, Taylor Made fender covers, including the 9204N, are designed for durability and made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fender cover protect against UV damage?\u003c\/strong\u003e Yes, the polyester knit used in the 9204N is UV protected in addition to being resistant to abrasion from marine elements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 9204N?\u003c\/strong\u003e Each order includes one Taylor Made 9204N fender cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 9204N fit fender styles other than Hull-Gard, Super Gard, and Big B?\u003c\/strong\u003e The 9204N is sized specifically for the Hull-Gard 6-1\/2 inch x 23 inch, Super Gard 5-1\/2 inch x 20 inch, and Big B 6 inch x 15 inch fender dimensions.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989677158619,"sku":"NAT-9204N","price":33.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61H8urGoYYS.jpg?v=1784487239"},{"product_id":"taylor-made-9205n-premium-fender-cover-navy-fits-8-1-2-hull-gard-8-1-2-super-gard-8-big-b-fenders","title":"Taylor Made Fender Cover, Navy, Fits 8-1\/2 x 27 Hull Gard, 8-1\/2 x 26 Super Gard, 8 x 20 Big B (9205N)","description":"\u003cp\u003eThe Taylor Made 9205N is a premium heavyweight fender cover built to shield your boat fenders from sun, water, and everyday wear. It is knit from a heavy weight 100% polyester fabric that resists abrasion, outdoor elements, and UV rays, so the cover holds its color and strength through repeated seasons on the water. The knit construction has a high degree of elasticity, giving the cover a snug, tailored fit over the fender rather than a loose, baggy one. An adjustable, high-strength polypropylene rope runs through both the top and bottom of the cover, cinching it securely in place and keeping the cover from shifting or slipping off the fender while underway or at the dock.\u003c\/p\u003e\u003cp\u003eThe 9205N is sized for the Taylor Made Hull Gard 8-1\/2 inch x 27 inch fender, the Super Gard 8-1\/2 inch x 26 inch fender, and the Big B 8 inch x 20 inch fender. It comes in navy, and removal for cleaning is simple: take the cover off the fender and machine wash it in cold water with a mild detergent. The cover is made in the USA.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9205N\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Navy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester, Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Fender Cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Hull Gard Size:\u003c\/strong\u003e 8-1\/2 inches x 27 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Super Gard Size:\u003c\/strong\u003e 8-1\/2 inches x 26 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Big B Size:\u003c\/strong\u003e 8 inches x 20 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTaylor Made Hull Gard fender, 8-1\/2 inches x 27 inches\u003c\/li\u003e\n\u003cli\u003eTaylor Made Super Gard fender, 8-1\/2 inches x 26 inches\u003c\/li\u003e\n\u003cli\u003eTaylor Made Big B fender, 8 inches x 20 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat fenders does the Taylor Made 9205N fender cover fit?\u003c\/strong\u003e The Taylor Made 9205N fits the Hull Gard fender sized 8-1\/2 inches x 27 inches, the Super Gard fender sized 8-1\/2 inches x 26 inches, and the Big B fender sized 8 inches x 20 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 9205N?\u003c\/strong\u003e Part number 9205N is navy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the fender cover made from?\u003c\/strong\u003e It is knit from a heavy weight 100% polyester fabric, with an adjustable polypropylene rope running through the top and bottom of the cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 9205N fender cover weigh?\u003c\/strong\u003e The 9205N fender cover weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cover stay secured to the fender?\u003c\/strong\u003e An adjustable, high-strength polypropylene rope runs through both the top and bottom of the 9205N cover, cinching it snugly around the fender so it does not slip off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the fender cover resistant to sun and water damage?\u003c\/strong\u003e Yes. The 9205N is constructed of 100% polyester that resists abrasion, outdoor elements, and UV rays.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you clean the 9205N fender cover?\u003c\/strong\u003e Remove the cover from the fender and machine wash it in cold water with a mild detergent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the 9205N fender cover made?\u003c\/strong\u003e The Taylor Made 9205N fender cover is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when you order the 9205N?\u003c\/strong\u003e The order includes one fender cover, part number 9205N.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cover have a tight or loose fit on the fender?\u003c\/strong\u003e The 9205N has a high degree of elasticity from its knit construction, giving it a snug, tailored fit rather than a loose one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 9205N sized differently for each fender type it fits?\u003c\/strong\u003e Yes. On the Hull Gard it covers an 8-1\/2 inch x 27 inch fender, on the Super Gard an 8-1\/2 inch x 26 inch fender, and on the Big B an 8 inch x 20 inch fender, so fit varies by which fender it is placed over.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989677387995,"sku":"NAT-9205N","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61H8urGoYYS_e3074f93-0a1c-49c1-b81f-5c68c5ea386e.jpg?v=1784487251"},{"product_id":"perko-1299dp0chr-chrome-plated-fender-lock-3-8-eye-x-1-1-2-flange-pack-of-2","title":"Perko 1299DP0CHR Chrome-Plated Fender Lock, 3\/8 Inch Eye x 1-1\/2 Inch OD Flange, 2-Pack","description":"\u003cp\u003eThe Perko 1299DP0CHR is a chrome-plated zinc alloy fender lock built to hold a boat's fender line securely in place along the rail or hull fitting. The eye is permanently attached to the fender line, so once it is set up the lock stays with the line for quick, repeatable attachment and release whenever the fender needs to go on or come off. The chrome-plated finish gives it a bright, corrosion-resistant surface that matches other polished deck hardware, while the zinc alloy body keeps the part light but sturdy for regular dockside use.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the eye is fixed to the fender line and the flange rides against the mounting point, requiring no special tools. This listing is for the 1299DP0CHR chrome-plated version, sold as a 2-pack, giving boat owners a matched pair for fenders rigged on both sides of the vessel.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1299DP0CHR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fender Lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye Inside Diameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Diameter (Flange OD):\u003c\/strong\u003e 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chrome-plated zinc alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1375 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 6 x 4 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226015915\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 1299DP0CHR fender lock used for?\u003c\/strong\u003e It secures a boat fender's line to a rail or mounting point, letting the fender line be attached and released without re-tying knots each time, which is the main function of the 1299DP0CHR fender lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the eye attach permanently to the fender line?\u003c\/strong\u003e Yes, on the 1299DP0CHR the eye is designed to be permanently attached to the fender line, so the lock stays fixed to the line for repeated use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the eye opening?\u003c\/strong\u003e The eye inside diameter on this Perko fender lock is 3\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is the lock overall?\u003c\/strong\u003e The 1299DP0CHR has an overall flange diameter of 1-1\/2 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the fender lock made from?\u003c\/strong\u003e It is made from chrome-plated zinc alloy, giving the 1299DP0CHR a bright corrosion-resistant surface over a durable metal body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fender locks come in this listing?\u003c\/strong\u003e This listing for the Perko 1299DP0CHR is sold as a 2-pack, providing a matched pair of chrome fender locks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does each package weigh?\u003c\/strong\u003e The Perko 1299DP0CHR fender lock package weighs 0.1375 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation difficult?\u003c\/strong\u003e No, installation is easy: the eye is fixed to the fender line and the flange sits against the mounting point on the boat, with no special tools required for the 1299DP0CHR.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the chrome finish hold up in saltwater use?\u003c\/strong\u003e The 1299DP0CHR uses a chrome-plated zinc alloy construction intended to resist corrosion from marine exposure better than an unfinished metal fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Perko fender lock?\u003c\/strong\u003e The UPC for the Perko 1299DP0CHR fender lock is 085226015915.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender lock be used on both port and starboard fenders?\u003c\/strong\u003e Yes, the 1299DP0CHR is a general-purpose fender lock and the 2-pack provides one for each side of the boat.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991121572059,"sku":"PKO-1299DPCHR","price":21.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__11092.1770691956.500.750.jpg?v=1785189197"},{"product_id":"perko-1309dp0chr-snap-type-fender-hook-chrome-plated-sold-in-pairs-2-pack","title":"Perko 1309DP0CHR Snap Type Fender Hook, Chrome Plated, Sold in Pairs","description":"\u003cp\u003eThe Perko 1309DP0CHR is a snap type fender hook used to attach a boat fender to the rail or stanchion using a length of line. Each hook is made of zinc alloy and finished in chrome plating for corrosion resistance in a marine environment. The hook accepts line up to 1\/4 inch in maximum diameter, and the mounting plate measures 1-9\/16 inches by 1-3\/8 inches with a #6 screw size for attachment. Perko sells this fender hook in pairs, so one package outfits both sides of a fender or two separate fenders. The snap style body lets a boat owner clip and release the fender line quickly when rigging fenders for docking or removing them for stowage, without untying knots each time. Installation is straightforward: the mounting plate is screwed to the rail, toe rail, or bulwark with #6 screws, and the fender line is snapped into the hook body.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1309DP0CHR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Snap Type Fender Hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Sold in pairs (2 per package)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Size:\u003c\/strong\u003e #6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Rope Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlate Dimensions:\u003c\/strong\u003e 1-9\/16 inches x 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.19 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226015960\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Bulk Package Number:\u003c\/strong\u003e 1309000CHR\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 1309DP0CHR used for?\u003c\/strong\u003e It is a snap type fender hook that lets a boat fender line be clipped to a rail or stanchion quickly, so the fender can be attached or removed without untying knots.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hooks come in a package of the 1309DP0CHR?\u003c\/strong\u003e The 1309DP0CHR is sold in pairs, so one package includes two snap type fender hooks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 1309DP0CHR fender hook made of?\u003c\/strong\u003e Perko makes the 1309DP0CHR from zinc alloy with a chrome plated finish for corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size screws are needed to mount the 1309DP0CHR?\u003c\/strong\u003e The 1309DP0CHR mounting plate uses #6 screws for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum rope size the 1309DP0CHR accepts?\u003c\/strong\u003e The 1309DP0CHR snap type fender hook accepts line up to 1\/4 inch in maximum diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 1309DP0CHR mounting plate?\u003c\/strong\u003e The mounting plate on the 1309DP0CHR measures 1-9\/16 inches by 1-3\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Perko 1309DP0CHR weigh?\u003c\/strong\u003e A package of the Perko 1309DP0CHR fender hooks weighs 0.19 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1309DP0CHR chrome plated on the outside only, or is the base metal also corrosion resistant?\u003c\/strong\u003e The 1309DP0CHR is a zinc alloy hook with a chrome plated finish over the metal for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a bulk packaging option for the 1309DP0CHR?\u003c\/strong\u003e Yes, Perko also offers this fender hook under OEM bulk package number 1309000CHR, in addition to the retail package 1309DP0CHR.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 1309DP0CHR fender hook installed?\u003c\/strong\u003e The mounting plate is fastened to a rail, toe rail, or bulwark using #6 screws, and the fender line is then snapped into the hook body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1309DP0CHR come with mounting screws included?\u003c\/strong\u003e The dossier for the 1309DP0CHR specifies a #6 screw size for mounting but does not list screws as an included component.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991121703131,"sku":"PKO-1309DPCHR","price":19.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__94269.1772225417.500.750.jpg?v=1785189144"},{"product_id":"t-h-marine-pfac-1-adjustable-pontoon-fender-hanger-clips-gray-fits-1-25-pontoon-rails-pair","title":"T-H Marine PFAC-1 Adjustable Tie-Down Clip - Gray, Fits 1.25 Inch Pontoon Rails, Pair","description":"\u003cp\u003eThe T-H Marine PFAC-1 Adjustable Tie-Down Clip gives pontoon owners a fast, secure way to hang docking fenders without drilling into the rail. Molded from a stylish gray composite material, each clip snaps directly onto pontoon rails and holds the fender's tie-down line at an adjustable point, so you can raise or lower fender height to match dock conditions. The clip is designed to fit 1.25 inch pontoon rails, the common diameter used on most pontoon boats, and installs by hand with no tools or hardware required.\u003c\/p\u003e\u003cp\u003eThis is the adjustable-mount version of T-H Marine's pontoon fender clip line; a fixed tie-down mount version is also available as a separate part for boaters who prefer a set, non-adjustable attachment point. Sold as a pair, the PFAC-1 lets you outfit both sides of the pontoon with matching, corrosion-resistant clips that keep fenders positioned correctly while docked or underway.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PFAC-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Adjustable Tie-Down Clip - Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Adjustable Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Gray Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Rail Diameter:\u003c\/strong\u003e 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair (2 clips)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2.5 x 3.6 x 8.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572086409\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal fit for pontoon boats with 1.25 inch diameter rails\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the T-H Marine PFAC-1 clip attach to?\u003c\/strong\u003e The PFAC-1 Adjustable Tie-Down Clip snaps onto a pontoon boat's rail and gives you a secure point to tie down a docking fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rail size does the PFAC-1 fit?\u003c\/strong\u003e It is designed to fit 1.25 inch diameter pontoon rails, the standard size found on most pontoon boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PFAC-1 sold individually or as a pair?\u003c\/strong\u003e The PFAC-1 is sold as a pair, giving you a matching clip for each side of the pontoon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the PFAC-1 clip made of?\u003c\/strong\u003e It is made from a gray composite material chosen for durability in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need tools to install the PFAC-1 clips?\u003c\/strong\u003e No tools are needed; the clip simply snaps onto the pontoon rail by hand and the tie-down line attaches to the adjustable mount point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the tie-down point on the PFAC-1 be adjusted?\u003c\/strong\u003e Yes, the PFAC-1 is the adjustable-mount version of T-H Marine's pontoon fender clip, letting you set the fender's tie-down height rather than using a single fixed point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the PFAC-1 and a fixed tie-down clip?\u003c\/strong\u003e The PFAC-1 offers an adjustable mounting point for the fender line, while T-H Marine's fixed tie-down clip (a separate part) holds the line at one set position instead of an adjustable one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the PFAC-1 clip?\u003c\/strong\u003e The PFAC-1 Adjustable Tie-Down Clip comes in gray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the PFAC-1 pair weigh?\u003c\/strong\u003e The PFAC-1 pair weighs 0.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the PFAC-1 clip?\u003c\/strong\u003e Each PFAC-1 clip measures 2.5 x 3.6 x 8.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the PFAC-1?\u003c\/strong\u003e An order of the PFAC-1 includes a pair of gray adjustable tie-down clips for attaching docking fenders to a pontoon rail.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991269781723,"sku":"T-H-PFAC-1-DP","price":14.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/adjustable-tie-down-clip-pontoon-fender-hanger-clips-for-pontoons-28008845901867.jpg?v=1784498946"},{"product_id":"polyform-mini-pump-hand-inflation-pump-with-adapter-nozzle-for-fenders-and-buoys","title":"Polyform Mini Pump - Hand Inflation Pump with Adapter Nozzle for Fenders and Buoys","description":"\u003cp\u003eThe Polyform Mini Pump is a compact hand pump built for topping off and inflating smaller Polyform US fenders, buoys, and other inflatable marine products. Sized to fit easily in a dock box, glove box, or tackle bag, it gives boat owners a fast, portable way to restore proper inflation pressure without hauling out a bulky air compressor.\u003c\/p\u003e\u003cp\u003eThe pump comes with an inflation adapter nozzle designed to mate with the valve system used on Polyform US inflatables, so there is no hunting for the right fitting before you can add air. Its housing is molded from corrosion-resistant plastic, making it a durable choice for use in a wet marine environment where metal tools would rust.\u003c\/p\u003e\u003cp\u003eThis is an accessory item intended specifically for smaller-sized Polyform US products such as compact fenders and buoys. Keep one aboard as a spare so you can maintain correct inflation on the water, at the dock, or during pre-season fender and buoy checks.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Polyform\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 34-213-984\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Accessory \/ Hand Inflation Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Cylindrical Fenders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Inflation adapter nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Inflating smaller sized Polyform US products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Corrosion-resistant plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multicolored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 6 x 2 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 743952907545\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Polyform Mini Pump used for?\u003c\/strong\u003e It is a small hand pump recommended for inflating smaller sized Polyform US products, such as compact fenders and buoys, part number 34-213-984.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Mini Pump come with a nozzle?\u003c\/strong\u003e Yes, the Polyform Mini Pump (34-213-984) includes an inflation adapter nozzle so it can connect directly to the valve on Polyform US inflatables.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size Polyform products is this pump meant for?\u003c\/strong\u003e The Mini Pump is recommended specifically for smaller sized Polyform US products, including compact fenders and buoys.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Polyform Mini Pump weigh?\u003c\/strong\u003e The Polyform Mini Pump weighs 0.1 pounds, making it easy to store aboard as a spare.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Mini Pump?\u003c\/strong\u003e The Polyform Mini Pump measures 6 x 2 x 2 inches (L x W x H).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Mini Pump made of?\u003c\/strong\u003e The Polyform Mini Pump is made of corrosion-resistant plastic, suited to a wet marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Mini Pump inflate larger Polyform fenders like the F-Series?\u003c\/strong\u003e The Mini Pump is recommended for smaller sized Polyform US products; it is not specified for larger fenders such as the F-Series line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a separate adapter needed to use this pump?\u003c\/strong\u003e No, the Polyform Mini Pump (34-213-984) ships with its own inflation adapter nozzle, so no separate fitting is required to inflate compatible Polyform products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Polyform Mini Pump?\u003c\/strong\u003e The Mini Pump is offered in a multicolored finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the Mini Pump?\u003c\/strong\u003e The package includes one Polyform Mini Pump (34-213-984) with its inflation adapter nozzle attached.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Polyform Mini Pump genuine Polyform equipment?\u003c\/strong\u003e Yes, the Mini Pump, part number 34-213-984, is a genuine Polyform US accessory designed to work with the brand's inflatable fenders and buoys.\u003c\/p\u003e","brand":"Polyform Fenders","offers":[{"title":"Default Title","offer_id":49026442330331,"sku":"POL-31","price":12.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/polyform-mini-pump.jpg?v=1785026302"},{"product_id":"polyform-inflation-adapter-for-boat-fenders-and-buoys-part-22-689-786","title":"Polyform Inflation Adapter for Boat Fenders and Buoys, Part 22-689-786","description":"\u003cp\u003eThe Polyform Inflation Adapter (part number 22-689-786) attaches to common tire pumps so you can inflate Polyform buoys and boat fenders without a specialty tool. It is a simple, single-piece accessory built for one job: connecting a standard air pump to the valve system used on Polyform buoys and fenders, making it quick and easy to top off air pressure whenever a fender or buoy runs soft.\u003c\/p\u003e\u003cp\u003eBecause it is designed to work with a common tire pump, boat owners can keep one on hand in a dock box or onboard kit and inflate their Polyform products on demand, without waiting for a specialty marine inflation needle or fitting. Polyform also publishes an inflation guide with detailed instructions for properly inflating buoys and fenders using this adapter.\u003c\/p\u003e\u003cp\u003eOne inflation adapter ships free with each order of Polyform buoys and fenders, so this listing is intended for boat owners who need a spare or replacement adapter on its own.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Polyform\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 22-689-786\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Spare Parts \/ Accessory\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Polyform buoys and boat fenders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Compatibility:\u003c\/strong\u003e Common tire pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.0125 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 743952010061\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Polyform Inflation Adapter used for?\u003c\/strong\u003e The Polyform Inflation Adapter, part number 22-689-786, attaches to a common tire pump so you can inflate Polyform buoys and boat fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a regular tire pump work with this adapter?\u003c\/strong\u003e Yes, the Polyform Inflation Adapter is designed to attach to common tire pumps, so no specialty inflation equipment is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does this adapter fit?\u003c\/strong\u003e This adapter is designed to inflate Polyform buoys and boat fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes a fender or buoy come with an inflation adapter already?\u003c\/strong\u003e Yes, Polyform includes one free inflation adapter with each order of Polyform buoys and fenders; part number 22-689-786 is available separately as a spare or replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Polyform Inflation Adapter weigh?\u003c\/strong\u003e The Polyform Inflation Adapter weighs 0.0125 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Polyform adapter?\u003c\/strong\u003e The UPC for the Polyform Inflation Adapter (part 22-689-786) is 743952010061.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any special tools to use this adapter?\u003c\/strong\u003e No, the Polyform Inflation Adapter is built to connect directly to a common tire pump, with no additional tools needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Polyform part?\u003c\/strong\u003e Yes, this is a genuine Polyform Inflation Adapter, part number 22-689-786.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I get instructions for inflating my Polyform fender or buoy?\u003c\/strong\u003e Polyform publishes an inflation guide with instructions for inflating buoys and fenders using the 22-689-786 Inflation Adapter.\u003c\/p\u003e","brand":"Polyform Fenders","offers":[{"title":"Default Title","offer_id":49026442592475,"sku":"POL-10","price":0.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/polyform-inflation-adapter.jpg?v=1785026301"},{"product_id":"polyform-fender-valve-screw-replacement-air-valve-screw-for-all-polyform-fenders","title":"Polyform Fender Valve Screw - Replacement Air Valve Screw for All Polyform Fenders","description":"\u003cp\u003eThe Polyform Fender Valve Screw is a replacement air valve screw designed to fit all Polyform fenders. This small hardware component secures the air valve on your Polyform fender, helping maintain proper air retention and a tight seal at the valve. Because it fits the full line of Polyform fenders, it is a straightforward replacement part to keep on hand if the original valve screw is lost, stripped, or damaged during inflation or maintenance. Its light weight and simple design make it an easy, low-cost fix that restores the valve to proper working condition without requiring a full fender replacement. Keeping a spare valve screw on board or in your maintenance kit is a practical way to avoid air loss and extend the usable life of your Polyform fender.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Polyform\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 81818792\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All Polyform Fenders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 489394319468\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Fender Locks and Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Polyform Fender Valve Screw used for?\u003c\/strong\u003e It is a replacement air valve screw that secures the air valve on a Polyform fender, part number 81818792, helping the valve hold air properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this valve screw fit my Polyform fender?\u003c\/strong\u003e Yes, the Polyform Fender Valve Screw, part number 81818792, is designed to fit all Polyform fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Polyform Fender Valve Screw weigh?\u003c\/strong\u003e This valve screw weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any tools to install the valve screw?\u003c\/strong\u003e The Polyform Fender Valve Screw threads into the fender's air valve; specific installation tools are not specified for part number 81818792.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the package?\u003c\/strong\u003e The listing for part number 81818792 includes one Polyform fender air valve screw.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace my fender's valve screw?\u003c\/strong\u003e A worn, stripped, or missing valve screw can cause a Polyform fender to lose air, so replacing it with part number 81818792 restores a proper seal at the valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an original Polyform part?\u003c\/strong\u003e Yes, the valve screw is identified by its Polyform manufacturer part number, 81818792.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this valve screw be used on any Polyform fender size?\u003c\/strong\u003e It is listed as compatible with all Polyform fenders, regardless of size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Polyform Fender Valve Screw sold individually?\u003c\/strong\u003e Part number 81818792 is the Polyform fender valve screw itself, sold as a single replacement part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does this part fall under?\u003c\/strong\u003e The Polyform Fender Valve Screw, 81818792, is classified under fender locks and accessories.\u003c\/p\u003e","brand":"Polyform Fenders","offers":[{"title":"Default Title","offer_id":49026442690779,"sku":"POL-81818792","price":0.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__18737.1754924511.500.750.jpg?v=1785329138"},{"product_id":"davis-instruments-fenderfriend-twin-eye-boat-fender-adjuster-black-adjusts-16-to-72-inches","title":"Davis Instruments FenderFriend Twin-Eye Boat Fender Adjuster, Black, Adjusts 16 to 72 Inches","description":"\u003cp\u003eThe Davis Instruments FenderFriend Twin-Eye is a fender whip, adjuster, and hanger in one, built around Davis's Shockles shock-absorbing technology. It attaches to any fender with eyelets and lets you quickly set fender height along a rail, stanchion, or cleat, then fine-tune it by tightening or loosening the strap. The built-in shock absorber stretches to receive the impact when fenders get squeezed between the hull and the dock or another boat, so the strap gives instead of your rail, cleat, or stanchion bending under the pull. This same give also protects fender eyelets from tearing, which is the usual failure point of a plain fender line.\u003c\/p\u003e\u003cp\u003eThe strap is made from UV-resistant nylon webbing sewn directly over marine-grade elastomer, so the stretch is built into the webbing itself rather than a separate cord. A sturdy marine-grade nylon buckle lets you attach and adjust the fender in seconds, and the strap adjusts from 16 to 72 inches (0.4 to 1.8 m) to fit most boats, houseboats, and pontoons. Because it holds a slight amount of tension at all times, it also helps keep the fender in place during docking, surges, and wake action while the boat is unattended. This is the Twin-Eye version, designed for fenders with eyelets at both ends; a Center-Tube version is sold separately as a different item for fenders without twin eyelets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Davis Instruments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2450\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Twin-Eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-resistant nylon webbing sewn over marine-grade elastomer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Nylon buckle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Length:\u003c\/strong\u003e 16 to 72 inches (0.4 to 1.8 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShock Absorber Stretch:\u003c\/strong\u003e 12 inches (30 centimeters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.44 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 011698010714\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e One Twin-Eye FenderFriend with black webbing and buckle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Davis Instruments FenderFriend Twin-Eye used for?\u003c\/strong\u003e It is a fender whip, adjuster, and hanger in one, attaching to a fender with eyelets and using a built-in Shockles shock absorber to cushion impacts as the fender rubs against the hull or dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fenders does the FenderFriend Twin-Eye fit?\u003c\/strong\u003e The strap adjusts from 16 to 72 inches (0.4 to 1.8 meters), which covers most boats, houseboats, and pontoons; the Twin-Eye version is meant for fenders that have eyelets on both ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the FenderFriend Twin-Eye stretch?\u003c\/strong\u003e The built-in shock absorber on the Davis 2450 FenderFriend Twin-Eye stretches about 12 inches (30 centimeters) to absorb impact when the fender is squeezed between the hull and the dock or another vessel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the FenderFriend made of?\u003c\/strong\u003e It is made of UV-resistant nylon webbing sewn over marine-grade elastomer, with a nylon buckle used to tighten or loosen the strap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you attach and adjust the FenderFriend Twin-Eye?\u003c\/strong\u003e Loop it through the fender's eyelet and secure it to a rail, stanchion, or cleat, then use the nylon buckle to tighten or loosen the strap until the fender sits at the height you want.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the FenderFriend Twin-Eye come in other configurations?\u003c\/strong\u003e Yes, Davis also sells a Center-Tube version (Davis #2455) for fenders that use a single center tube rather than twin eyelets; part number 2450 covers only the Twin-Eye style in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this protect my boat's rails and stanchions?\u003c\/strong\u003e Yes, because the FenderFriend's shock absorber stretches under load, it keeps stanchions, rails, and cleats from bending under the pull of a fender, instead of transferring that force directly into the hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the FenderFriend Twin-Eye prevent torn fender eyes?\u003c\/strong\u003e Yes, the stretch built into the Davis 2450 strap absorbs the shock that would otherwise tear a fender's eyelet, which is a common failure point with rigid fender lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the FenderFriend Twin-Eye come in?\u003c\/strong\u003e The Davis Instruments FenderFriend Twin-Eye, part number 2450, comes with black webbing and a black buckle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the FenderFriend Twin-Eye weigh?\u003c\/strong\u003e The Twin-Eye FenderFriend weighs 0.44 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the FenderFriend Twin-Eye?\u003c\/strong\u003e One Twin-Eye FenderFriend strap with black nylon webbing and a nylon buckle is included, part number 2450.\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":49026457501915,"sku":"DAV-2450","price":21.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2450_07_264e597b-5086-4a66-9d04-203f58c39b3e.jpg?v=1785026823"},{"product_id":"davis-instruments-fender-tender-ii-fender-clip-white","title":"Davis Instruments Fender Tender II Fender Clip, White","description":"\u003cp\u003eThe Davis Instruments Fender Tender II is a boat fender clip that lets you attach and reposition fenders quickly along rails, lifelines, side wing windows, or cleats without retying knots. Its \"Railing Lock\" jaw firmly grips rails from 7\/8 inch to 1 inch (22 to 25 mm) in diameter, so it clamps securely to the most common boat rail sizes without slipping. A newer \"Lifeline Lock\" feature adds a second attachment method for 1\/4 inch to 3\/8 inch (6 mm to 9 mm) diameter nylon line, giving an added measure of security when fenders are hung from lifelines rather than solid rails. This makes the Fender Tender II versatile across different boat layouts, whether fenders need to hang from tubular rail, a lifeline run, or a fixed cleat.\u003c\/p\u003e\u003cp\u003eThe clip body is molded from tough, sun-resistant plastic designed to hold up to repeated UV exposure, saltwater spray, and the wear of regular docking and undocking. Because it is a mechanical clip rather than a knot or tie-down, fenders can be moved from one position to another in seconds, which is useful when switching sides at a slip, rafting up alongside another boat, or adjusting fender height for a different dock. The Fender Tender II ships in white and is sold as an individual clip.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Davis Instruments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 393\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fender Clip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRailing Lock Diameter Range:\u003c\/strong\u003e 7\/8 inch to 1 inch (22 to 25 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifeline Lock Line Diameter Range:\u003c\/strong\u003e 1\/4 inch to 3\/8 inch (6 mm to 9 mm) nylon line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tough, sun-resistant plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 11 x 6.75 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.37 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for rails from 7\/8 inch to 1 inch (22 to 25 mm) diameter and lifelines using 1\/4 inch to 3\/8 inch (6 mm to 9 mm) nylon line; not specific to a particular boat make or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Davis Instruments Fender Tender II used for?\u003c\/strong\u003e Part number 393 is a clip used to attach boat fenders to rails, lifelines, side wing windows, or cleats so they can be moved or repositioned without untying and retying lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size rail does the Fender Tender II fit?\u003c\/strong\u003e The Railing Lock on the Fender Tender II grips rails from 7\/8 inch to 1 inch (22 to 25 mm) in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Fender Tender II attach to a lifeline instead of a rail?\u003c\/strong\u003e Yes, the Fender Tender II includes a Lifeline Lock feature that grips 1\/4 inch to 3\/8 inch (6 mm to 9 mm) diameter nylon line for added security when hanging fenders from a lifeline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Fender Tender II made from?\u003c\/strong\u003e It is molded from tough, sun-resistant plastic intended to withstand UV exposure and saltwater conditions over repeated use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does part number 393 come in?\u003c\/strong\u003e The Fender Tender II is offered in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Fender Tender II weigh?\u003c\/strong\u003e The Davis Instruments Fender Tender II weighs 0.37 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Fender Tender II?\u003c\/strong\u003e Item dimensions for part 393 are 11 x 6.75 x 1.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Fender Tender II fit a specific boat make or model?\u003c\/strong\u003e No, the Fender Tender II is a universal clip that fits any rail from 7\/8 inch to 1 inch diameter or lifeline using 1\/4 inch to 3\/8 inch nylon line, regardless of boat make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many clips are included when ordering part 393?\u003c\/strong\u003e The Davis Instruments Fender Tender II is sold as a single clip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs any tool required to install the Fender Tender II?\u003c\/strong\u003e No tools are needed; the Fender Tender II's Railing Lock and Lifeline Lock mechanisms are designed to clamp on and release by hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Fender Tender II made?\u003c\/strong\u003e Part number 393 is manufactured in the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use a Fender Tender II instead of tying fenders with line?\u003c\/strong\u003e The Fender Tender II lets a fender be clipped on and repositioned in seconds, avoiding the need to untie and retie knots every time a fender needs to move.\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":49026457698523,"sku":"DAV-393","price":37.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/00393_03_c56fac2c-8d30-41ee-aaa9-aae08755014a.jpg?v=1785026823"},{"product_id":"davis-instruments-fenderfriend-center-tube-fender-adjuster-strap-black-adjusts-16-to-72-inches","title":"Davis Instruments FenderFriend Center-Tube Fender Adjuster Strap, Black, Adjusts 16 to 72 Inches","description":"\u003cp\u003eThe Davis Instruments FenderFriend Center-Tube is a fender whip, adjuster, and hanger in one, built to hold a fender securely against the hull or dock while absorbing the shocks of docking and passing wakes. At its core is a Shockles built-in shock absorber that stretches to take the impact generated when a fender rubs or is squeezed between the hull and dock or another boat, rather than transmitting that force directly to the boat's hardware. This helps protect stanchions, rails, and cleats from bending under the pulling force of a fender under load.\u003c\/p\u003e\u003cp\u003eThe strap is UV resistant and adjusts from 16 to 72 inches (0.4-1.8 m), so a single FenderFriend can be set to the correct fender height for a wide range of freeboard heights and fender sizes, and then tightened or loosened as conditions change. A sturdy, marine grade nylon buckle makes attaching a fender quick and simple, eliminating the torn fender eyes that can result from tying lines directly through a fender's mounting eye. The shock absorber itself stretches up to 12 inches (30 cm) to keep the fender in place during surges, wakes, and while the boat is unattended.\u003c\/p\u003e\u003cp\u003eThis is the Center-Tube version of the FenderFriend, which includes the strap with black webbing and buckle, and is designed for fenders with a center tube rather than the twin end eyes used by the Twin-Eye version. Davis Instruments also offers a Twin-Eye FenderFriend as a separate item for fenders with eyes at each end.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Davis Instruments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2455\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersion:\u003c\/strong\u003e Center-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Adjustment Range:\u003c\/strong\u003e 16 to 72 inches (0.4-1.8 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShock Absorber Stretch:\u003c\/strong\u003e up to 12 inches (30 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuckle Material:\u003c\/strong\u003e Marine grade nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Properties:\u003c\/strong\u003e UV resistant webbing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.51 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 011698010752\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Fender Lines and Straps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e One Center-Tube FenderFriend with black webbing and buckle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Davis Instruments FenderFriend Center-Tube used for?\u003c\/strong\u003e It is a fender whip, adjuster, and hanger in one that attaches a boat fender to a rail, stanchion, or cleat and lets you quickly set and adjust the fender's height using its nylon buckle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the strap on FenderFriend 2455 adjust?\u003c\/strong\u003e The strap adjusts from 16 to 72 inches (0.4 to 1.8 m), which covers a wide range of freeboard heights and fender sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Shockles shock absorber in this product do?\u003c\/strong\u003e It is a built-in shock absorber that stretches up to 12 inches (30 cm) to take the impact when a fender is squeezed between the hull and a dock or another boat, helping keep the fender in place during surges and wakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fender strap protect my boat's cleats and rails?\u003c\/strong\u003e Yes, the FenderFriend's shock-absorbing stretch is designed to keep stanchions, rails, and cleats from bending under the pulling force of a fender under load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Center-Tube and Twin-Eye FenderFriend?\u003c\/strong\u003e The Center-Tube version, part number 2455, is made for fenders with a center tube, while the Twin-Eye version is a separate Davis Instruments product designed for fenders with an eye at each end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the FenderFriend 2455?\u003c\/strong\u003e It comes with black webbing and a black buckle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the FenderFriend Center-Tube?\u003c\/strong\u003e Each unit includes one Center-Tube FenderFriend with black webbing and a marine grade nylon buckle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the FenderFriend Center-Tube weigh?\u003c\/strong\u003e The Davis Instruments FenderFriend Center-Tube weighs 0.51 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the FenderFriend strap durable for outdoor marine use?\u003c\/strong\u003e The strap is UV resistant webbing paired with a sturdy marine grade nylon buckle, both intended for exposure to sun and marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the FenderFriend eliminate the need to tie fenders through their eyes?\u003c\/strong\u003e Yes, the nylon buckle lets you attach a fender quickly without tying directly through the fender's mounting eye, which helps prevent torn fender eyes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Davis Instruments FenderFriend 2455 a genuine Davis Instruments product?\u003c\/strong\u003e Yes, part number 2455 is the manufacturer part number for the genuine Davis Instruments FenderFriend Center-Tube in black.\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":49026457665755,"sku":"DAV-2455","price":19.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2455_03_750x518_258d61d9-5ee7-45ec-a9b7-2cd14702273e.jpg?v=1785026825"},{"product_id":"aamstrand-fender-line-3-8-inch-x-8-foot-2-pack-boat-fender-whip","title":"Aamstrand Fender Line 3\/8 Inch x 8 Foot, 2-Pack Boat Fender Whip","description":"\u003cp\u003eThis Aamstrand fender line is a pre-cut boat fender whip measuring 3\/8 inch in diameter and 8 feet in length, sold as a pack of two lines in a single bag. Fender lines like this are used to hang boat fenders from the rail or cleats at a consistent, adjustable height so the fender protects the hull against docks, pilings, and neighboring vessels. Having two lines in one package makes it convenient to rig fenders on both sides of the boat, or to keep a matched spare on hand for a fender that needs to be re-hung or replaced.\u003c\/p\u003e\u003cp\u003eEach line is sized to work with standard boat fenders and is long enough to be tied off at the rail, run through the fender's eye, and adjusted to the desired hang height, with excess line trimmed or coiled as needed. The 3\/8 inch diameter is a common size for fender whips, giving a good balance of grip and strength for hand-tying knots such as a clove hitch or a simple loop-and-hitch at the fender eye.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Aamstrand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 29450\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fender Line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 2 lines per bag\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.7 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Aamstrand fender line, part number 29450?\u003c\/strong\u003e It measures 3\/8 inch in diameter and 8 feet in length, sized for hanging standard boat fenders from the rail or cleats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fender lines come in this package?\u003c\/strong\u003e Two 3\/8 inch by 8 foot fender lines are included in one bag with the Aamstrand 29450 fender line set, enough to rig fenders on both sides of a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fender line weigh?\u003c\/strong\u003e The two-pack of Aamstrand 29450 fender lines weighs 0.7 pounds total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a fender line used for?\u003c\/strong\u003e A fender line, sometimes called a fender whip, is used to hang a boat fender from the rail or a cleat at an adjustable height so it cushions the hull against docks, pilings, or other boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use one of these lines per fender?\u003c\/strong\u003e Yes, each 8 foot line in the Aamstrand 29450 pack can be used to hang a single fender, and the two-pack allows you to rig fenders on both sides of the boat at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fender line long enough for larger fenders hung higher on the rail?\u003c\/strong\u003e At 8 feet long, the Aamstrand 29450 fender line provides enough length to tie off at the rail and adjust the fender to most common hang heights, with excess trimmed or coiled as needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat diameter fender line do I need to match my existing setup?\u003c\/strong\u003e This Aamstrand fender line set is 3\/8 inch in diameter, a common size for fender whips, so it will match setups already using 3\/8 inch line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this come with the fenders themselves?\u003c\/strong\u003e No, the Aamstrand 29450 package includes only the two 3\/8 inch by 8 foot fender lines, not the fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan these lines be used as spares for existing fenders?\u003c\/strong\u003e Yes, because the pack includes two lines, one Aamstrand 29450 set can serve as a matched spare for a fender line that needs replacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat knot should I use to attach the fender line to the fender?\u003c\/strong\u003e A common approach is a loop tied through the fender's eye and a clove hitch or similar hitch at the rail, using the 3\/8 inch Aamstrand fender line.\u003c\/p\u003e","brand":"AAmstrand","offers":[{"title":"Default Title","offer_id":49031067336923,"sku":"AMS-29450","price":30.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/r_f8f1e82e-85d7-49a5-af72-c39bd0c88e12.jpg?v=1785347590"},{"product_id":"big-sky-precision-1-2-inch-fender-lock-install-tool-316-stainless-steel","title":"Big Sky Precision 1\/2 Inch Fender Lock Install Tool, 316 Stainless Steel","description":"\u003cp\u003eThe Big Sky Precision 1\/2 Inch Install Tool (BSPA-1183) is a purpose-built installation aid for mounting 1\/2 inch quick-release fender cleats and retrofit fender receivers on your boat. Rather than relying on guesswork or improvised jigs, the tool uses a built-in locator disc that holds the receiver in the correct position while you drill and fasten, so the finished mount lines up cleanly every time. This is especially useful when retrofitting an existing fender lock system or replacing a worn receiver, since accurate hole placement is what keeps the cleat seated and working smoothly.\u003c\/p\u003e\u003cp\u003eThe tool itself is machined from Type 316 stainless steel, the same corrosion-resistant grade used throughout marine hardware, so it holds up to repeated use in both fresh and saltwater environments without rusting or pitting. It ships as a single install tool sized specifically for the 1\/2 inch fender receiver line; a separate 3\/8 inch version is sold for the smaller receiver size, so confirm which size your fender lock hardware uses before ordering. Big Sky Precision backs the tool with a lifetime warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Big Sky Precision\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e BSPA-1183\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Install Tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 3 x 1 x 0.4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions (L x W x H):\u003c\/strong\u003e 6.6 x 4 x 0.4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.17 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 1\/2 Inch Install Tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 866847000128\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Fender Locks and Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Big Sky Precision BSPA-1183 install tool used for?\u003c\/strong\u003e The BSPA-1183 is an installation tool for mounting 1\/2 inch quick-release fender cleats and retrofit fender receivers, using a locator disc to position the receiver accurately before drilling and fastening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this tool fit both 1\/2 inch and 3\/8 inch fender receivers?\u003c\/strong\u003e No, the BSPA-1183 is sized specifically for 1\/2 inch fender receivers. A separate install tool is sold for 3\/8 inch receivers, so verify your receiver size before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the BSPA-1183 install tool made from?\u003c\/strong\u003e It is machined from Type 316 stainless steel, which resists corrosion in both fresh and saltwater conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the BSPA-1183 install tool weigh?\u003c\/strong\u003e The BSPA-1183 weighs 0.17 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the install tool itself?\u003c\/strong\u003e The BSPA-1183 install tool measures 3 x 1 x 0.4 inches, with a package size of 6.6 x 4 x 0.4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the BSPA-1183?\u003c\/strong\u003e The package includes one 1\/2 inch install tool; no fender cleats or receivers are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a locator disc included with the tool?\u003c\/strong\u003e Yes, the BSPA-1183 has a built-in locator disc that holds the fender receiver in place for accurate positioning during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the BSPA-1183 install tool reusable?\u003c\/strong\u003e Yes, it is a durable stainless steel tool intended for repeated use when installing or replacing fender lock receivers, not a single-use item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the BSPA-1183 install tool come with a warranty?\u003c\/strong\u003e Big Sky Precision covers the BSPA-1183 with a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the BSPA-1183 be used for a retrofit installation, not just a new one?\u003c\/strong\u003e Yes, the BSPA-1183 is designed to work for both retrofit installations and replacement of existing 1\/2 inch fender receivers.\u003c\/p\u003e","brand":"Big Sky Precision","offers":[{"title":"Default Title","offer_id":49031070023899,"sku":"BSP-BSPA-1183","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41R5tzMSgrL.jpg?v=1785207944"},{"product_id":"phender-pro-1-2-inch-quick-release-fender-cleat-set-316-stainless-steel-bspa-1182","title":"Phender Pro 1\/2-Inch Quick Release Fender Cleat Set, 316 Stainless Steel, BSPA-1182","description":"\u003cp\u003eThe Phender Pro BSPA-1182 is a 1\/2-inch quick release fender set built from 316 stainless steel for reliable corrosion resistance in both fresh and saltwater environments. The set includes one quick release pin and one retrofit receiver, making it suited for both new installations and retrofitting existing fender line setups. The receiver is protected with a Delrin tip to prevent dents and add further corrosion protection, while the pin's design keeps it positioned above the receiver to shield the polished finish. Line attachment tabs are CNC machined to soften edges, which helps protect fender lines from abrasion and wear during regular use.\u003c\/p\u003e\u003cp\u003eThis 1\/2-inch kit is sized for boats using a recommended hole size of 1 inch and a recommended rope size of 1\/2 inch, giving it flexibility across a range of boat sizes. Installation is straightforward, and the set can be paired with the Phender Pro install tool (BSPA-1183, sold separately) for easier fitting. The kit ships as a single unit (1 receiver and 1 pin) and is backed by a lifetime warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Phender Pro\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e BSPA-1182\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2-Inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Hole Size:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Rope Size:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiver Tip Material:\u003c\/strong\u003e Delrin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3.2 x 3 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.74 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 866847000104\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hole size and rope size does the Phender Pro BSPA-1182 fit?\u003c\/strong\u003e The BSPA-1182 quick release fender set is designed for a recommended hole size of 1 inch and a recommended rope size of 1\/2 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the BSPA-1182 fender set made from?\u003c\/strong\u003e It is made from 316 stainless steel, chosen for its resistance to corrosion in both fresh and saltwater conditions, with the receiver additionally protected by a Delrin tip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the BSPA-1182 kit?\u003c\/strong\u003e The kit includes one quick release pin and one retrofit receiver, sold as a single 1\/2-inch set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the BSPA-1182 be used to retrofit an existing fender line setup?\u003c\/strong\u003e Yes, the BSPA-1182 is designed for both new installations and retrofitting existing fender lines using its retrofit receiver.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a tool that makes installing the BSPA-1182 easier?\u003c\/strong\u003e The BSPA-1182 can be installed using the Phender Pro install tool, BSPA-1183, which is sold as a separate item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Delrin tip on the receiver help protect the fender line?\u003c\/strong\u003e The Delrin tip protects the receiver from dents and helps prevent wear, extending the life of both the receiver and the attached fender line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are the line attachment tabs CNC machined on the BSPA-1182?\u003c\/strong\u003e The tabs are CNC machined to soften their edges, which reduces abrasion on the fender line during regular use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the BSPA-1182 fender set come with a warranty?\u003c\/strong\u003e Yes, the BSPA-1182 is backed by a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in one BSPA-1182 kit?\u003c\/strong\u003e One BSPA-1182 kit contains a single quick release pin and a single retrofit receiver (1 set).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat sizes does the BSPA-1182 come in, and how do I know which one to order?\u003c\/strong\u003e The BSPA-1182 is the 1\/2-inch version of the quick release fender set; buyers should verify their existing hole and rope size before ordering to ensure correct fit.\u003c\/p\u003e","brand":"Big Sky Precision","offers":[{"title":"Default Title","offer_id":49031070056667,"sku":"BSP-BSPA-1182","price":115.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41sG83QT7GL.jpg?v=1785207944"},{"product_id":"phender-pro-1-2-inch-quick-release-fender-holder-type-316-stainless-steel-bspa-1180","title":"Phender Pro 1\/2 Inch Quick-Release Fender Holder, Type 316 Stainless Steel, BSPA-1180","description":"\u003cp\u003eThe Phender Pro 1\/2 Inch Quick-Release Fender Holder (BSPA-1180) is a machined boat fender attachment designed to make docking fast and hassle-free with true single-hand operation. Its anti-wear design positions the pin above the receiver, which keeps the pin from riding against the housing and protects the holder's highly polished finish over repeated use. The line attachment tabs are CNC machined with softened edges so they do not fray or cut into your fender line, and the receiver itself is protected by a Delrin tip that resists denting on contact. The entire holder is machined from Type 316 stainless steel, giving it strong resistance to corrosion in both fresh and saltwater environments, making it suitable for long-term use on boats that see regular time on the water.\u003c\/p\u003e\u003cp\u003eThis fender holder is sized for 1\/2 inch rope and is built to install with the BSPA-1181 retrofit receiver, allowing it to be added to existing setups without extensive modification. It is backed by a lifetime warranty from Phender Pro.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Phender Pro\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e BSPA-1180\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Type 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiver Tip Material:\u003c\/strong\u003e Delrin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Type:\u003c\/strong\u003e Quick release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Rope Size:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Diameter:\u003c\/strong\u003e 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread\/Pin Size:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2.5 x 2.5 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.41 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Retrofit Receiver:\u003c\/strong\u003e BSPA-1181\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 866847000142\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat rope size does the Phender Pro BSPA-1180 fender holder work with?\u003c\/strong\u003e The BSPA-1180 is recommended for use with 1\/2 inch rope.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the BSPA-1180 fender holder made of?\u003c\/strong\u003e It is machined from Type 316 stainless steel, which resists corrosion in both fresh and saltwater environments, with a Delrin-protected receiver tip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the BSPA-1180 require a separate receiver to install?\u003c\/strong\u003e Yes, this fender holder installs with the BSPA-1181 retrofit receiver.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Phender Pro fender holder easy to operate while docking?\u003c\/strong\u003e Single-hand operation is a core feature of the BSPA-1180, letting you release or attach a fender quickly during docking without needing a second hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the pin on this fender holder wear down the finish over time?\u003c\/strong\u003e No, the BSPA-1180 uses an anti-wear design that positions the pin above the receiver, which protects the holder's highly polished finish from repeated contact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fender holder protect the rope from fraying?\u003c\/strong\u003e The line attachment tabs on the BSPA-1180 are CNC machined with softened edges specifically to protect the rope from cutting or fraying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the BSPA-1180?\u003c\/strong\u003e The Phender Pro BSPA-1180 measures 2.5 x 2.5 x 1.5 inches and has a 0.5 inch item diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the BSPA-1180 fender holder weigh?\u003c\/strong\u003e It weighs 0.41 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on this fender holder?\u003c\/strong\u003e Yes, the BSPA-1180 is covered by a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat protects the receiver from denting on the BSPA-1180?\u003c\/strong\u003e A Delrin tip covers the receiver, protecting it from denting on contact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the BSPA-1180 be used in saltwater?\u003c\/strong\u003e Yes, its Type 316 stainless steel construction is built for corrosion resistance in both fresh and saltwater environments.\u003c\/p\u003e","brand":"Big Sky Precision","offers":[{"title":"Default Title","offer_id":49031070122203,"sku":"BSP-BSPA-1180","price":92.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/619hLRH_XJL.jpg?v=1785207944"},{"product_id":"big-sky-precision-quick-release-fender-holder-pin-bspa-1184-3-8-inch-316-stainless-steel","title":"Big Sky Precision Quick Release Fender Holder Pin BSPA-1184, 3\/8 Inch, 316 Stainless Steel","description":"\u003cp\u003eThe Big Sky Precision BSPA-1184 is a 3\/8 inch quick release fender holder pin built from Type 316 stainless steel for corrosion resistance in both fresh and saltwater environments. It is designed to work with the Big Sky Precision BSPA-1185 retrofit receiver, letting a boater attach or release a fender with a single-hand motion for hassle-free docking. The pin is sized for use with 3\/4 inch rope, making it suited to most common fender line setups.\u003c\/p\u003e\u003cp\u003eConstruction features an anti-wear design that keeps the pin positioned above the receiver, protecting the receiver's polished finish from repeated contact. The receiver-facing tip is fitted with a Delrin cap to prevent denting and further guard against corrosion, and the line attachment tabs are CNC machined to soften sharp edges so the fender line is not chafed or cut during use. The pin ships as a single unit and is backed by a lifetime warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Big Sky Precision\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e BSPA-1184\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Quick Release Fender Holder Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Size:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Type 316 stainless steel with Delrin tip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Rope Size:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Receiver:\u003c\/strong\u003e BSPA-1185 retrofit receiver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2 x 2 x 1.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.21 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWorks with the Big Sky Precision BSPA-1185 retrofit receiver\u003c\/li\u003e\n\u003cli\u003eCompatible with 3\/4 inch rope size\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers listed for this part\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat pin size is the Big Sky Precision BSPA-1184 fender holder?\u003c\/strong\u003e The BSPA-1184 is a 3\/8 inch quick release fender holder pin, so confirm your existing setup uses a 3\/8 inch pin before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rope size does this fender holder work with?\u003c\/strong\u003e The BSPA-1184 is sized for use with 3\/4 inch rope.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the BSPA-1184 pin made of?\u003c\/strong\u003e It is made from Type 316 stainless steel with a Delrin tip on the end that contacts the receiver.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the BSPA-1184 need a specific receiver to work?\u003c\/strong\u003e Yes, the BSPA-1184 pin is designed to work with the Big Sky Precision BSPA-1185 retrofit receiver, which is a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the BSPA-1184 resistant to saltwater corrosion?\u003c\/strong\u003e Yes, the 316 stainless steel construction is resistant to corrosion in both fresh and saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pins come in this listing?\u003c\/strong\u003e This BSPA-1184 listing includes one quick release fender holder pin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the BSPA-1184 pin installed and used?\u003c\/strong\u003e Single-hand operation lets you insert or release the BSPA-1184 pin from its receiver quickly, making docking easier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the BSPA-1184 pin?\u003c\/strong\u003e The item measures 2 x 2 x 1.3 inches and weighs 0.21 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the BSPA-1184 protect the fender line from wear?\u003c\/strong\u003e The line attachment tabs on the BSPA-1184 are CNC machined to soften edges and reduce wear on the fender line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the BSPA-1184 pin protect the receiver's finish?\u003c\/strong\u003e A Delrin tip on the BSPA-1184 protects the receiver from denting and helps preserve its polished finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on the BSPA-1184 fender holder pin?\u003c\/strong\u003e Big Sky Precision backs the BSPA-1184 with a lifetime warranty.\u003c\/p\u003e","brand":"Big Sky Precision","offers":[{"title":"Default Title","offer_id":49031070154971,"sku":"BSP-BSPA-1184","price":50.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61sgeMYokTL.jpg?v=1785207944"},{"product_id":"phender-pro-3-8-inch-quick-release-fender-set-316-stainless-steel-made-in-usa","title":"Phender Pro 3\/8 Inch Quick Release Fender Set, 316 Stainless Steel, Made in USA","description":"\u003cp\u003eThe Phender Pro BSPA-1186 Quick Release Fender Set is a stainless steel fender attachment kit built for boaters who dock and undock often and want a faster, more secure alternative to tying and untying fender lines by hand. The set is machined from Type 316 stainless steel, giving it strong corrosion resistance in both fresh and saltwater environments, and it is made in the USA. A unique anti-wear design positions the quick-release pin above the receiver so the highly polished finish stays protected from wear, while the line attachment tabs are CNC machined with softened edges to protect your rope from chafing and fraying. The receiver itself is protected by a Delrin tip, which prevents denting and helps the mechanism release smoothly time after time.\u003c\/p\u003e\u003cp\u003eThis 3\/8 inch set is sized for 3\/8 inch rope and pairs with a recommended mounting hole size of 3\/4 inch. Installation uses a quick-release pin and retrofit receiver, and single-hand operation makes hanging or removing a fender quick work even when your hands are full. For fast, hassle-free installation, the set can be used with the Phender Pro Install Tool (BSPA-1187). The kit ships as one complete fender set and is backed by a lifetime warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Phender Pro\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e BSPA-1186\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Type 316 stainless steel with Delrin tip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Rope Size:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Hole Size:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3.1 x 2.3 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Package Dimensions:\u003c\/strong\u003e 6.5 x 4.2 x 0.2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.38 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Install Tool:\u003c\/strong\u003e BSPA-1187\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 866847000111\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Phender Pro BSPA-1186 fender set used for?\u003c\/strong\u003e The BSPA-1186 is a quick release fender set that lets boaters attach and remove boat fenders quickly using a pin and receiver instead of tying rope by hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rope size does the BSPA-1186 fit?\u003c\/strong\u003e This 3\/8 inch fender set is designed for 3\/8 inch rope; boaters running thicker line should look at the corresponding 1\/2 inch Phender Pro fender set instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole does this fender set need?\u003c\/strong\u003e A 3\/4 inch mounting hole is the recommended hole size for installing the BSPA-1186 quick release fender set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the BSPA-1186 fender set made from?\u003c\/strong\u003e Type 316 stainless steel is used for the BSPA-1186, chosen for its corrosion resistance in both fresh and saltwater boating environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the BSPA-1186 include a Delrin tip?\u003c\/strong\u003e Yes, the receiver on the BSPA-1186 fender set is protected by a Delrin tip, which helps prevent denting and keeps the quick-release action smooth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fender attachments come in the BSPA-1186 kit?\u003c\/strong\u003e The BSPA-1186 ships as one complete quick release fender set, listed as a single item kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a special tool needed to install the BSPA-1186?\u003c\/strong\u003e No special tool is required, but the Phender Pro Install Tool (BSPA-1187) can be used with the BSPA-1186 for faster, single-hand installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the BSPA-1186 fender set operated?\u003c\/strong\u003e Single-hand quick-release operation lets you attach or remove a fender from the BSPA-1186 receiver without needing both hands free.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the BSPA-1186 protect my dock lines from wear?\u003c\/strong\u003e The line attachment tabs on the BSPA-1186 are CNC machined with softened edges specifically to protect rope from chafing and fraying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the BSPA-1186 and a 1\/2 inch fender holder?\u003c\/strong\u003e The BSPA-1186 is sized for 3\/8 inch rope with a 3\/4 inch mounting hole, while the 1\/2 inch Phender Pro fender holder is a separate part sized for thicker line, so the two are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the BSPA-1186 fender set made in the USA?\u003c\/strong\u003e Yes, the Phender Pro BSPA-1186 quick release fender set is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the BSPA-1186?\u003c\/strong\u003e The BSPA-1186 fender set is backed by a lifetime warranty from Phender Pro.\u003c\/p\u003e","brand":"Big Sky Precision","offers":[{"title":"Default Title","offer_id":49031070220507,"sku":"BSP-BSPA-1186","price":97.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41sG83QT7GL_e0ac8eaf-43df-4250-8fdf-c46b2b10813c.jpg?v=1785207948"},{"product_id":"big-sky-precision-3-8-inch-quick-release-fender-cleat-install-tool-316-stainless-steel","title":"Big Sky Precision 3\/8 Inch Quick-Release Fender Cleat Install Tool, 316 Stainless Steel","description":"\u003cp\u003eThe Big Sky Precision 3\/8 Inch Install Tool (BSPA-1187) is a purpose-built hand tool for installing 3\/8 inch quick-release fender cleats into retrofit fender receivers. It features a locator disc that holds the tool in precise position on the boat surface, making it easier to seat the receiver squarely and get a clean, correctly aligned installation on the first attempt.\u003c\/p\u003e\u003cp\u003eThe tool is machined from Type 316 stainless steel, a grade selected for its resistance to corrosion in both fresh and saltwater environments, so it holds up to repeated use around the water without rusting or pitting. It is made in the USA and sized specifically for the 3\/8 inch fender receiver style; boat owners should confirm their receiver size before ordering, since a separate tool is required for the 1\/2 inch version. Big Sky Precision backs the BSPA-1187 with a lifetime warranty.\u003c\/p\u003e\u003cp\u003eThis tool is intended for boat owners installing new quick-release fender hardware or replacing existing 3\/8 inch fender cleats, and is compact and lightweight enough to keep aboard for future adjustments or reinstallation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Big Sky Precision\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e BSPA-1187\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Fender Locks \u0026amp; Accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8 Inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\/Color:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2.4 x 0.5 x 0.01 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5.79 x 4.09 x 0.91 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 866847000135\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e 3\/8 Inch retrofit fender receivers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Big Sky Precision 3\/8 Inch Install Tool used for?\u003c\/strong\u003e This tool installs 3\/8 inch quick-release fender cleats into retrofit fender receivers, using a built-in locator disc to hold the tool in position while the cleat is set. It is part number BSPA-1187 from Big Sky Precision.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this install tool work with 1\/2 inch fender receivers?\u003c\/strong\u003e No, the BSPA-1187 is sized specifically for 3\/8 inch retrofit fender receivers. A separate tool is required for the 1\/2 inch size, so confirm your receiver size before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the BSPA-1187 install tool made from?\u003c\/strong\u003e It is machined from Type 316 stainless steel, a grade chosen for corrosion resistance in both fresh and saltwater conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this product made?\u003c\/strong\u003e The Big Sky Precision 3\/8 Inch Install Tool, part number BSPA-1187, is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the install tool?\u003c\/strong\u003e The tool itself measures 2.4 x 0.5 x 0.01 inches, and it ships in packaging measuring 5.79 x 4.09 x 0.91 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the BSPA-1187 install tool weigh?\u003c\/strong\u003e 0.09 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a warranty included with this tool?\u003c\/strong\u003e Yes, Big Sky Precision covers the BSPA-1187 install tool with a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many tools come in the package?\u003c\/strong\u003e One 3\/8 inch install tool, part number BSPA-1187, ships per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the locator disc on this tool do?\u003c\/strong\u003e The locator disc is a feature built into the BSPA-1187 that holds the tool in a precise position on the mounting surface, making it easier to seat the fender cleat correctly during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this tool be used for replacing existing fender cleats, not just new installs?\u003c\/strong\u003e Yes, the BSPA-1187 works for both installing new 3\/8 inch quick-release fender cleats and replacing existing ones.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if I need the 3\/8 inch or 1\/2 inch version of this tool?\u003c\/strong\u003e Measure or check the size of your fender receiver before ordering; the BSPA-1187 is the 3\/8 inch version, and a different part number is needed for 1\/2 inch receivers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does the install tool have?\u003c\/strong\u003e It has a natural stainless steel finish, consistent with its 316 stainless steel construction.\u003c\/p\u003e","brand":"Big Sky Precision","offers":[{"title":"Default Title","offer_id":49031070253275,"sku":"BSP-BSPA-1187","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41R5tzMSgrL_0604629c-8c88-4209-a14b-5d74f0192eb8.jpg?v=1785207948"},{"product_id":"windline-fnd-3-double-fender-holder-for-9-to-11-inch-fenders-stainless-steel-rail-mount","title":"Windline FND-3 Double Fender Holder for 9 to 11 Inch Fenders, Stainless Steel Rail Mount","description":"\u003cp\u003eThe Windline FND-3 is a double basket fender holder built to keep boat fenders organized, off the deck, and ready to deploy. It is designed for fenders measuring 9 inches to 11 inches in diameter and holds two fenders in stainless steel basket-style rods, freeing up deck space and reducing tripping hazards while docked or underway.\u003c\/p\u003e\u003cp\u003eConstructed of solid stainless steel rods with no sharp edges, the FND-3 avoids the straps or bands used on cheaper fender holders, which can wear or snap over time. The holder folds down quickly when not in use and swivels to allow mounting on lower rails, making it easy to tuck away or deploy fenders on demand. It mounts to most standard rail diameters from 7\/8 inch to 1 inch, fitting common boat railing without additional adapters. Windline backs the FND-3 with a lifetime warranty against manufacturer or labor defects.\u003c\/p\u003e\u003cp\u003eThis holder is intended for boaters who want a clean, safe way to stow round fenders rail-side rather than leaving them loose on deck or hanging over the side. A smaller companion model, the FND-2, is sized for 7 inch to 9 inch fenders and is a separate part for boaters with smaller fenders.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Windline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e FND-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Double Basket Fender Holder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Size Compatibility:\u003c\/strong\u003e 9 inches to 11 inches in diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Mount Diameter:\u003c\/strong\u003e 7\/8 inch to 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Shelves:\u003c\/strong\u003e 1 (double basket, holds 2 fenders)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Silver stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Foldable, swivel mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Rail mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Outdoor fender storage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.19 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty for manufacturer or labor defects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size fenders does the Windline FND-3 fit?\u003c\/strong\u003e The Windline FND-3 is sized for round fenders measuring 9 inches to 11 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fenders does the FND-3 hold?\u003c\/strong\u003e The FND-3 is a double basket fender holder, so it holds two fenders at once in its stainless steel rod baskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rail sizes does the FND-3 mount to?\u003c\/strong\u003e It fits most standard boat rails from 7\/8 inch to 1 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the FND-3 fender holder made of stainless steel?\u003c\/strong\u003e Yes, the FND-3 is constructed of solid stainless steel rods with no sharp edges, rather than straps or bands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the FND-3 fold down when not in use?\u003c\/strong\u003e Yes, the FND-3 folds down quickly and effectively, and it also swivels to allow mounting on lower rails.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Windline FND-3 weigh?\u003c\/strong\u003e The FND-3 double fender holder weighs 3.19 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the FND-2 and FND-3 fender holders?\u003c\/strong\u003e The FND-2 is sized for smaller fenders measuring 7 inches to 9 inches in diameter, while the FND-3 covers larger fenders from 9 inches to 11 inches. They are separate part numbers, so choose the one that matches your fender size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the FND-3 come with mounting hardware?\u003c\/strong\u003e Yes, the FND-3 fender holder includes hardware for mounting to compatible rails.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Windline FND-3?\u003c\/strong\u003e Windline covers the FND-3 with a lifetime warranty for manufacturer or labor defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the FND-3 holder designed for indoor or outdoor use?\u003c\/strong\u003e The FND-3 is designed for outdoor use on a boat's rail system.\u003c\/p\u003e","brand":"Windline","offers":[{"title":"Default Title","offer_id":49031418839259,"sku":"WIN-FND-3","price":205.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71QdDLq8SeL.jpg?v=1785213963"},{"product_id":"taco-marine-quick-release-fender-lock-stainless-steel-type-316l-f16-0151-1","title":"TACO Marine Quick Release Fender Lock, Stainless Steel Type-316L, F16-0151-1","description":"\u003cp\u003eThe TACO Marine Quick Release Fender Lock (F16-0151-1) gives boaters a fast, single-hand way to store fender lines at the dock while keeping fenders set at the correct, consistent length. Tie off a hanging fender with the fender line run through the 7\/8 inch hole beside the push button, then insert the mounting pin into the fitting to secure it. To release, a single push of the button frees the pin for quick removal of float-style fenders.\u003c\/p\u003e\u003cp\u003eBuilt from stainless steel Type-316L for corrosion resistance in a marine environment, the lock stands 1-19\/32 inches above the deck once mounted and includes a 1\/4 inch drain plug to keep water from pooling in the housing. The design is intended for float-style fenders and is well suited to boaters who want a cleaner, more consistent dockside setup without re-tying fender lines every time.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e TACO Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e F16-0151-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Quick Release Fender Lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel Type-316L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight Above Deck:\u003c\/strong\u003e 1-19\/32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Line Hole Diameter:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrain Plug Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.74 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Single-hand push-button release\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the TACO Marine F16-0151-1 used for?\u003c\/strong\u003e The F16-0151-1 is a quick release fender lock that lets you tie off a hanging fender line at the dock and secure it in place with a removable mounting pin, keeping the fender at a consistent, optimal length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the F16-0151-1 fender lock made from?\u003c\/strong\u003e It is manufactured from stainless steel Type-316L, chosen for its resistance to marine corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow tall does the fender lock sit above the deck?\u003c\/strong\u003e Once mounted, the F16-0151-1 stands 1-19\/32 inches above the deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the hole for running the fender line through?\u003c\/strong\u003e The fender line passes through a 7\/8 inch hole located beside the push button on the F16-0151-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the F16-0151-1 include a drain plug?\u003c\/strong\u003e Yes, a 1\/4 inch drain plug is included with the F16-0151-1 to help prevent water from pooling in the fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you operate the quick release fender lock?\u003c\/strong\u003e Operation is single-handed: tie off the fender line through the 7\/8 inch hole, insert the mounting pin into the fitting to lock it in place, and press the push button to release the pin when removing the fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the F16-0151-1 work with any fender?\u003c\/strong\u003e It is designed for float-style fenders and offers a universal fit for that fender type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the F16-0151-1 weigh?\u003c\/strong\u003e The TACO Marine F16-0151-1 weighs 0.74 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the fender lock come with?\u003c\/strong\u003e Each F16-0151-1 unit includes the fender lock fitting, mounting pin, and a 1\/4 inch drain plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use a quick release fender lock instead of just tying off a fender line?\u003c\/strong\u003e The F16-0151-1 keeps the fender line at a fixed, optimal length via the attached mounting pin, and lets you release the fender with a single push of a button instead of untying knots at the dock.\u003c\/p\u003e","brand":"Taco Marine","offers":[{"title":"Default Title","offer_id":49031444398299,"sku":"TAC-F16-0151-1","price":110.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41MRFcYTdpL.jpg?v=1785214206"},{"product_id":"airhead-no-slip-fender-straps-2-pack-8-5-inch-adjustable-6-to-40-inch-white-nylon","title":"Airhead No-Slip Fender Straps, 2-Pack, 8.5 Inch, Adjustable 6 to 40 Inch, White Nylon","description":"\u003cp\u003eThe Airhead No-Slip Fender Straps (SF-2) are a 2-pack of adjustable nylon straps designed to attach boat fenders securely to rails and cleats. Each strap adjusts in length from 6 inches to 40 inches, making it easy to fit a wide range of boats and docking configurations. The hook-style hardware is made of stainless steel for corrosion resistance, while the strap body is built from durable white nylon webbing measuring 8.5 inches in the packaged length and width.\u003c\/p\u003e\u003cp\u003eThese straps are designed to minimize sliding along rails, keeping fenders positioned where you place them instead of drifting out of place while docked or underway. Because the straps loop and cinch rather than relying on a fixed-length design, they work with a variety of fender shapes and sizes and can be tightened down for a snug, no-slip hold. The 2-pack format covers both sides of a single fender attachment point or lets you outfit two separate fenders.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Airhead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SF-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 8.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Length Range:\u003c\/strong\u003e 6 inches to 40 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e Hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 8.5 inches L x 8.5 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2375 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 737826019786\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Airhead SF-2 fender straps?\u003c\/strong\u003e The Airhead SF-2 comes as a 2-pack of No-Slip Fender Straps, each 8.5 inches with a stainless steel hook fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do the straps adjust to?\u003c\/strong\u003e Each strap in the SF-2 2-pack adjusts from 6 inches up to 40 inches, allowing it to fit most boats and docking setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the fender straps made from?\u003c\/strong\u003e The straps are made of white nylon webbing paired with stainless steel hook hardware for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill these straps keep my fender from sliding along the rail?\u003c\/strong\u003e Yes, the Airhead No-Slip design is built specifically to minimize sliding of the fender along boat rails once the strap is cinched down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fenders can one pack of SF-2 straps secure?\u003c\/strong\u003e The SF-2 pack includes 2 straps, which is enough to secure one fender at two attachment points or two separate fenders with one strap each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the Airhead fender straps?\u003c\/strong\u003e The SF-2 fender straps are white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a pack of Airhead SF-2 fender straps weigh?\u003c\/strong\u003e A 2-pack of Airhead SF-2 No-Slip Fender Straps weighs 0.2375 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the packaged size of the SF-2 fender straps?\u003c\/strong\u003e The Airhead SF-2 fender straps have item dimensions of 8.5 inches long by 8.5 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the straps attach to cleats as well as rails?\u003c\/strong\u003e Yes, the Airhead No-Slip Fender Straps are designed to attach fenders to rails and cleats using their adjustable hook fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the hardware on the SF-2 straps rust resistant?\u003c\/strong\u003e The hook fastener hardware on the SF-2 fender straps is stainless steel, which resists corrosion in marine environments.\u003c\/p\u003e","brand":"Airhead","offers":[{"title":"Default Title","offer_id":49031624949979,"sku":"K-T-SF-2","price":8.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71Rn_gbcq7L.jpg?v=1785217027"},{"product_id":"e-z-ty-rope-stop-for-1-2-inch-rope-black-boat-fender-line-stop-part-13","title":"E-Z-TY Rope Stop for 1\/2 Inch Rope, Black Boat Fender Line Stop, Part 13","description":"\u003cp\u003eThe E-Z-TY Rope Stop is a reusable clip designed for boat fenders that have a handle running through the full length of the fender body. Rather than tying knots or relying on friction alone, the Rope Stop clamps onto the rope and prevents it from slipping back out of the fender, keeping the fender securely positioned along the rail or hull. It is built for 1\/2 inch diameter rope and finished in black for a sleek, low-profile look that will not scratch or mar boat surfaces or gelcoat finishes as it sits against the hull. The clip is easy to install and remove by hand, so it can be reused each season or moved between fenders without special tools. This part is manufactured in the USA. It is sold as the 1\/2 inch version; a 5\/8 inch version is also offered for boaters with a different rope diameter, so be sure to match the stop to your fender's rope size before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e E-Z-TY\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 13\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Diameter:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Weight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 850004999646\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the E-Z-TY Rope Stop 1\/2 used for?\u003c\/strong\u003e It is used on boat fenders that have a handle running through the full length of the fender, clamping onto the rope so it cannot slip back out and the fender stays in position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rope diameter does E-Z-TY part number 13 fit?\u003c\/strong\u003e Part number 13 is sized for 1\/2 inch diameter rope. A separate 5\/8 inch version is available for thicker rope, so match the stop to your rope's actual diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the E-Z-TY Rope Stop scratch my boat's finish?\u003c\/strong\u003e No. The E-Z-TY Rope Stop is designed to not scratch or mar boat surfaces or finishes as it rests against the hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the E-Z-TY Rope Stop reusable?\u003c\/strong\u003e Yes, the Rope Stop is reusable and can be removed and reinstalled by hand without special tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this rope stop?\u003c\/strong\u003e This E-Z-TY Rope Stop, part number 13, is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the E-Z-TY Rope Stop 1\/2 weigh?\u003c\/strong\u003e It weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the E-Z-TY Rope Stop 1\/2 made?\u003c\/strong\u003e The E-Z-TY Rope Stop, part number 13, is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install the E-Z-TY Rope Stop on my fender?\u003c\/strong\u003e The rope stop is easy to install by hand onto the rope that runs through the fender's handle, clamping in place to prevent the rope from slipping back through.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a larger size available for thicker rope?\u003c\/strong\u003e Yes, in addition to this 1\/2 inch version (part 13), a 5\/8 inch version is available for fenders using thicker rope.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the E-Z-TY Rope Stop 1\/2?\u003c\/strong\u003e You receive the E-Z-TY Rope Stop, part number 13, sized for 1\/2 inch rope, in black.\u003c\/p\u003e","brand":"EZ-TY","offers":[{"title":"Default Title","offer_id":49033321283803,"sku":"E-Z-13","price":6.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/21mZSGsBxdL.jpg?v=1785244640"},{"product_id":"taylor-made-fender-covers-fits-hull-gard-super-gard-and-big-b-fenders","title":"Taylor Made Fender Covers - Fits Hull-Gard, Super Gard, and Big B Fenders","description":"\u003cp\u003eProtect your boat's topsides and give your fenders a clean, finished look with Taylor Made fender covers. Knit from 100% polyester fabric that resists UV fading and abrasion, each cover slips over a matching Taylor Made fender and cinches down with an adjustable, high-strength polypropylene rope at both the top and bottom hem. The result is a snug, wrinkle-free fit that stays put in rough docking conditions while cushioning your hull from scuffs and marks. Covers are machine washable, so refreshing a salt-stained or grimy fender takes nothing more than a cold-water cycle.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Taylor Made\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eMaterial: 100% polyester knit fabric with polypropylene drawstring rope\u003c\/li\u003e\n\u003cli\u003eClosure: Adjustable high-strength polypropylene rope, top and bottom\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: United States\u003c\/li\u003e\n\u003cli\u003eCare Instructions: Machine washable, cold water, mild detergent\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThese covers are sized to match specific Taylor Made fender models, not by a standalone dimension, so choose based on which fender you already own (or are ordering alongside). The 9204R fits Hull-Gard 6-1\/2 x 23, Super Gard 5-1\/2 x 20, and Big B 6 x 15 fenders. The 9205R fits Hull-Gard 8-1\/2 x 27, Super Gard 8-1\/2 x 26, and Big B 8 x 20 fenders. Check the exact model and dimensions printed on your fender before ordering, since covers are not interchangeable between the two sizes.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Fits Hull-Gard 6-1\/2\" x 23\", Super Gard 5-1\/2\" x 20\", Big B 6\" x 15\"","offer_id":49046108668123,"sku":"NAT-9204R","price":33.5,"currency_code":"USD","in_stock":false},{"title":"Fits Hull-Gard 8-1\/2\" x 27\", Super Gard 8-1\/2\" x 26\", Big B 8\" x 20\"","offer_id":49046108700891,"sku":"NAT-9205R","price":35.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61ihHaYLClL_750246d6-e530-4f1e-9b34-fdcfb8ec6691.jpg?v=1785394035"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/2455_03_750x518_9f5e877f-aa85-4c4a-a5f8-1a6977cc5216.jpg?v=1785356941","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-docking-fendering-boat-fenders-fender-lines-holders-locks.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}