{"title":"Round \u0026 Cylindrical Fenders","description":null,"products":[{"product_id":"taylor-made-hull-gard-inflatable-boat-fender-white-6-1-2-x-23-mpn-1023-for-boats-20-to-25","title":"Taylor Made Products Hull Gard Inflatable Vinyl Boat Fender, White, 6-1\/2 Inch x 23 Inch, for Boats 20 to 25 Feet","description":"\u003cp\u003eThe Taylor Made Products Hull Gard fender (part number 1023) is an inflatable, cylindrical boat fender built to keep hull sides protected from dock rash and rub against pilings. It measures 6-1\/2 inches in diameter by 23 inches in length, sized for boats from 20 to 25 feet long. The fender uses a unique oval shape rather than a perfectly round cross-section, which helps it resist rolling out of position so it stays where you hang it along the rail.\u003c\/p\u003e\u003cp\u003eConstruction is tough marine-grade vinyl finished with True Color technology for a deep, consistent white that resists fading from sun and saltwater exposure. A 5\/8 inch double eyelet configuration lets you hang the fender vertically or horizontally, so it adapts to different rail heights and docking setups. Each fender arrives custom inflated to the correct pressure, so it is ready to hang and use straight out of the box without a separate pump or gauge. The Hull Gard 1023 is made in the USA and backed by a lifetime guarantee against splitting or bursting, giving boat owners long-term confidence in everyday fendering duty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1023\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Cylindrical (Hull Gard) inflatable boat fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter x Length:\u003c\/strong\u003e 6-1\/2 inches x 23 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Size:\u003c\/strong\u003e 20 feet to 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEyelet Configuration:\u003c\/strong\u003e 5\/8 inch double eyelet, vertical or horizontal hanging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 1 Hull-Gard fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime guarantee against splitting or bursting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Taylor Made 1023 Hull Gard fender designed for?\u003c\/strong\u003e This fender is sized for boats 20 to 25 feet long, with a body measuring 6-1\/2 inches in diameter by 23 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Hull Gard fender arrive ready to use?\u003c\/strong\u003e Yes, the Hull Gard 1023 is custom inflated to the correct pressure at the factory and ships inflated, so no pump or gauge is needed before hanging it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the Hull Gard fender shaped the way it is instead of perfectly round?\u003c\/strong\u003e The Hull Gard 1023 uses a unique oval shape specifically to prevent the fender from rolling out of position, keeping it in place against the hull for consistent protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Taylor Made 1023 fender made from?\u003c\/strong\u003e It is made from tough marine-grade vinyl, finished with Taylor Made's True Color technology for a deep, long-lasting white color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender be hung both vertically and horizontally?\u003c\/strong\u003e Yes, the 1023 fender has a 5\/8 inch double eyelet configuration that supports either vertical or horizontal hanging depending on your rail setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Hull Gard 1023 fender weigh?\u003c\/strong\u003e The Taylor Made Hull Gard fender, part number 1023, weighs 2.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made Hull Gard fender made in the USA?\u003c\/strong\u003e Yes, the Hull Gard 1023 is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Hull Gard 1023 fender?\u003c\/strong\u003e It is backed by a lifetime guarantee against splitting or bursting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options does part number 1023 come in?\u003c\/strong\u003e This specific listing, part number 1023, is white; Taylor Made offers the Hull Gard fender line in other colors under different part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the Hull Gard 1023?\u003c\/strong\u003e Each order includes one Hull-Gard fender, custom inflated and ready to hang.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989663527131,"sku":"NAT-1023","price":32.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41Gy4Bc2t6S_ef70361f-c834-43ed-bd83-610f2156af49.jpg?v=1784486389"},{"product_id":"taylor-made-hull-gard-inflatable-boat-fender-10-1-2-x-30-mpn-1024-fits-boats-35-to-50-ft","title":"Taylor Made Products Hull Gard Vinyl Boat Fender, 10-1\/2 x 30 Inch, Fits Boats 35 to 50 Feet, Part 1024","description":"\u003cp\u003eThe Taylor Made Products Hull Gard fender, part number 1024, is a cylindrical inflatable vinyl fender sized 10-1\/2 inches by 30 inches, sized for boats in the 35 foot to 50 foot range. Taylor Made recommends running 2 fenders of this size per boat in that length range for proper hull protection along the dock or at a slip.\u003c\/p\u003e\u003cp\u003eBuilt from vinyl for softness combined with puncture and abrasion resistance, the Hull Gard fender cushions the hull against pilings, dock edges, and other vessels. It inflates through a rubber football-style needle valve, letting you adjust firmness to match conditions and the level of protection needed. Each fender is backed by a lifetime guarantee against splitting or bursting, and it is made in the U.S.A.\u003c\/p\u003e\u003cp\u003eBecause fender sizing is matched to boat length, choosing the correct size and running enough fenders is important to keep the hull protected; the 10-1\/2 x 30 inch size (part 1024) is Taylor Made's recommendation for the 35 to 50 foot boat range, with larger sizes such as the 12 x 34 inch fender recommended for boats from 50 to 60 feet.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1024\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Cylindrical Boat Fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Size:\u003c\/strong\u003e 10-1\/2 inches x 30 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 35 feet to 50 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Quantity:\u003c\/strong\u003e 2 fenders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.19 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011310248\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation Valve:\u003c\/strong\u003e Rubber needle valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime guarantee against splitting or bursting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Taylor Made 1024 fender designed for?\u003c\/strong\u003e Part number 1024 is sized for boats from 35 feet to 50 feet, per Taylor Made's fender size chart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of fender 1024?\u003c\/strong\u003e This fender measures 10-1\/2 inches by 30 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many of these fenders do I need?\u003c\/strong\u003e Taylor Made recommends 2 fenders of the 10-1\/2 x 30 inch size (part 1024) for boats in the 35 to 50 foot range as a minimum for proper hull protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Hull Gard fender made from?\u003c\/strong\u003e The Hull Gard fender, including part 1024, is made from vinyl for a combination of softness and puncture\/abrasion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you inflate the fender?\u003c\/strong\u003e Inflation is through a rubber football-style needle valve, which lets you adjust the firmness of the fender to the level of protection needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on the Taylor Made Hull Gard fender?\u003c\/strong\u003e Yes, the Hull Gard fender carries a lifetime guarantee against splitting or bursting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Taylor Made Hull Gard fender manufactured?\u003c\/strong\u003e It is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape is part number 1024?\u003c\/strong\u003e It is a cylindrical fender, 10-1\/2 inches in diameter by 30 inches long, rather than a round or oval fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for part 1024?\u003c\/strong\u003e The UPC for the 10-1\/2 x 30 inch Hull Gard fender, part 1024, is 040011310248.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fender should I use for a bigger boat, up to 60 feet?\u003c\/strong\u003e For boats from 50 to 60 feet, Taylor Made's chart recommends a larger 12 x 34 inch fender instead of the 10-1\/2 x 30 inch part 1024.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1024 fender weigh?\u003c\/strong\u003e The 10-1\/2 x 30 inch Hull Gard fender, part 1024, weighs 5.19 pounds.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989663690971,"sku":"NAT-1024","price":200.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41Gy4Bc2t6S_f4692cf1-fc01-410c-80f6-8c4e8d1bd8bb.jpg?v=1784486395"},{"product_id":"taylor-made-products-1021-hull-gard-inflatable-vinyl-boat-fender-4-5-x-16-white-boats-10-15-ft","title":"Taylor Made Products 1021 Hull Gard Inflatable Vinyl Boat Fender, 4-1\/2 x 16 Inch, White, Fits Boats 10 to 15 Feet","description":"\u003cp\u003eThe Taylor Made Products 1021 Hull Gard is an inflatable vinyl boat fender measuring 4-1\/2 inches in diameter by 16 inches long, sized for boats 10 feet to 15 feet. It ships custom inflated and ready to hang, with a rubber football needle valve on all sizes so owners can adjust firmness to suit their application; recommended inflation is 2 psi. The fender uses an oval design rather than a round cross-section, which helps keep it from rolling out of position along the hull and reduces hull rub compared to a fender that can roll. Reinforced molded-in construction is built to withstand the constant pull of everyday docking and fendering use. The 1021 is finished in white and is covered by a lifetime guarantee against splitting or bursting. It is made in the U.S.A. Boaters selecting a fender size are advised to survey their docking area to see what fender size and quantity other boats of similar size and weight are using, and use that as a guideline for their own setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1021\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Cylindrical boat fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Size:\u003c\/strong\u003e 10 feet to 15 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Oval, anti-roll design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Rubber football needle valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Inflation:\u003c\/strong\u003e 2 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011310217\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime guarantee against splitting or bursting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Taylor Made 1021 Hull Gard fender designed for?\u003c\/strong\u003e The Taylor Made Products 1021 is recommended for boats 10 feet to 15 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 1021 fender?\u003c\/strong\u003e The 1021 measures 4-1\/2 inches in diameter by 16 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1021 fender weigh?\u003c\/strong\u003e The Taylor Made 1021 weighs 1.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 1021 Hull Gard fender?\u003c\/strong\u003e This part number, 1021, is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Hull Gard fender made from?\u003c\/strong\u003e It is made from vinyl with reinforced molded-in construction designed to withstand the constant pull of everyday fendering use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1021 fender come inflated?\u003c\/strong\u003e Yes, the Taylor Made 1021 ships custom inflated and ready to hang.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat inflation pressure should I use for the 1021 fender?\u003c\/strong\u003e Recommended inflation for the 1021 is 2 psi, adjustable through its rubber football needle valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the 1021 fender oval instead of round?\u003c\/strong\u003e The oval shape of the 1021 is designed to prevent the fender from rolling out of position and to reduce hull rub compared to a fender that rolls freely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of valve does the 1021 fender use?\u003c\/strong\u003e The 1021 uses a rubber football needle valve for easy inflation, allowing the firmness to be adjusted for different applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1021 fender covered by a warranty?\u003c\/strong\u003e Yes, the Taylor Made 1021 carries a lifetime guarantee against splitting or bursting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Taylor Made 1021 fender made?\u003c\/strong\u003e The 1021 Hull Gard fender is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I pick the right fender size, and is the 1021 the right one for my boat?\u003c\/strong\u003e Taylor Made recommends surveying your docking area to see what fender size and quantity similarly sized boats are using as a guideline; the 1021 covers the 10 foot to 15 foot boat range at 4-1\/2 inches by 16 inches.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989663756507,"sku":"NAT-1021","price":16.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61gHvGvNCuL.jpg?v=1784486398"},{"product_id":"taylor-made-1067-pwc-fender-for-personal-watercraft-hook-under-quick-attach-yellow-9-x-9-x-3-5-in","title":"Taylor Made PWC Fender, Yellow, Hook-Under Quick Attachment, 9 x 9 x 3.5 Inches","description":"\u003cp\u003eThis Taylor Made PWC fender is built to protect the sides of a personal watercraft during slow-speed docking and storage. Made from marine-grade vinyl designed to withstand salt water and UV exposure, the fender is shaped to hook under the bond flange of most personal watercraft for quick, tool-free attachment. Flex areas built into the fender body act as a hinge, allowing it to conform to the contours of the hull rather than sitting rigid against it.\u003c\/p\u003e\u003cp\u003eBecause personal watercraft hulls vary by make, model, and year, this fender is not a custom fit and is designed to work with most PWC profiles where the underside of the bond flange is open enough to accept the hook. Fit will vary depending on the specific watercraft. The fender includes a rubber needle-valve for inflation and air pressure adjustment with a standard air pump, along with a suction cup and a securing line for additional attachment options. It is intended for slow-speed docking use only and is not rated for use at full speed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1067\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 9 x 9 x 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment Style:\u003c\/strong\u003e Hook-under quick attachment (bond flange)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation:\u003c\/strong\u003e Rubber needle-valve, standard air pump compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Accessories:\u003c\/strong\u003e Suction cup, securing line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Slow-speed docking only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill the Taylor Made 1067 PWC fender fit my personal watercraft exactly?\u003c\/strong\u003e It is designed to fit the profiles of most personal watercraft where the underside of the bond flange is open enough to allow the fender to hook underneath, but it is not a custom fit and how well it fits will vary by the specific make, model, and year of the watercraft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the fender attach to a personal watercraft?\u003c\/strong\u003e The bottom of the Taylor Made 1067 fender is shaped to hook under the bond flange for quick attachment, and it also comes with a suction cup and a securing line for additional hold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this PWC fender made from?\u003c\/strong\u003e It is made from marine-grade vinyl engineered to hold up to salt water and UV exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this fender come in?\u003c\/strong\u003e This part number, 1067, is the yellow version of the Taylor Made PWC fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this fender?\u003c\/strong\u003e The Taylor Made 1067 measures 9 x 9 x 3.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fender weigh?\u003c\/strong\u003e It weighs 1.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this fender while riding at full speed?\u003c\/strong\u003e No, the Taylor Made 1067 is recommended for slow-speed docking only and is not intended for use at full speed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I inflate the fender and adjust the air pressure?\u003c\/strong\u003e It includes a rubber needle-valve that lets you inflate it and adjust air pressure with a standard air pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this fender?\u003c\/strong\u003e The Taylor Made 1067 comes with the fender itself, a suction cup, and a securing line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the fender flex in certain areas?\u003c\/strong\u003e Built-in flex areas create a hinge-like action that lets the fender conform to the shape of the watercraft hull for a closer fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fender a universal fit for all PWC models?\u003c\/strong\u003e No, it is designed to work with most PWC profiles that have an open bond flange underside, but Taylor Made states it is not a custom fit and fit quality depends on the specific watercraft.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989664280795,"sku":"NAT-1067","price":42.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71K0kGPSHWL.jpg?v=1784486434"},{"product_id":"taylor-made-personal-watercraft-fender-white-quick-hook-pwc-dock-bumper-with-suction-cup-and-line-mpn-1069","title":"Taylor Made PWC Fender, White, Marine-Grade Vinyl with Hook Attachment, Part 1069","description":"\u003cp\u003eThe Taylor Made PWC Fender is a personal watercraft bumper built to protect the sides of your vessel during low-speed docking. Constructed of tough, resilient marine-grade vinyl, it flexes and conforms to the shape of your watercraft rather than sitting rigid against the hull. The fender's underside uses a hinge-type hook that attaches quickly to the bond flange, so you can mount and remove it without tools. A football-needle inflation valve lets you set air pressure with a standard air pump, and the fender ships complete with a suction cup and a securing line for a stable, snug fit against the hull.\u003c\/p\u003e\u003cp\u003eThis fender is designed to fit most personal watercraft profiles, though the exact fit will vary depending on the specific make, model, and year of the vessel. It is intended for slow-speed docking use only and is not rated for use at speed. Finished in white, it is manufactured by Taylor Made, part of the Lippert family of marine and RV product brands.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1069\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e PWC Fender, White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9 x 9 x 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment Type:\u003c\/strong\u003e Hinge-type hook for bond flange attachment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation Valve:\u003c\/strong\u003e Football-needle valve, standard air pump compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e PWC fender, suction cup, securing line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Slow speed docking only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned to fit most personal watercraft profiles; actual fit varies by the specific make, model, and year of the watercraft.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made PWC Fender used for?\u003c\/strong\u003e It protects the sides of a personal watercraft from scrapes and impacts while docking at low speed. The Taylor Made fender (part 1069) is not intended for use at speed or underway.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fender fit my specific PWC model?\u003c\/strong\u003e It is designed to fit most personal watercraft profiles, but it is not a custom fit and the exact fit will vary depending on the make, model, and year of the watercraft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the fender made from?\u003c\/strong\u003e Marine-grade vinyl that is designed to flex and conform to the shape of the watercraft hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the fender attach to the watercraft?\u003c\/strong\u003e A hinge-type hook on the bottom of the fender attaches to the bond flange for quick, tool-free installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Taylor Made PWC Fender?\u003c\/strong\u003e The fender measures 9 x 9 x 3.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the fender weigh?\u003c\/strong\u003e 1.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I inflate the fender?\u003c\/strong\u003e Part 1069 uses a football-needle inflation valve, which allows air pressure to be adjusted with a standard air pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the fender?\u003c\/strong\u003e The fender ships with a suction cup and a securing line in addition to the fender itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options are available?\u003c\/strong\u003e This Taylor Made fender is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender be used while the PWC is underway?\u003c\/strong\u003e No. It is recommended for slow speed docking only and is not intended for use at speed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fenders come in the package?\u003c\/strong\u003e One fender is included per package.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989664313563,"sku":"NAT-1069","price":42.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61zX4vEGAGL.jpg?v=1784486435"},{"product_id":"taylor-made-tuff-end-15-inflatable-round-boat-fender-white-mpn-1146-seamless-marine-grade-vinyl-buoy-made-in-usa","title":"Taylor Made Products Tuff End Round Fender Buoy 1146, 15 Inch, White","description":"\u003cp\u003eThe Taylor Made Products Tuff End Round Fender Buoy (part number 1146) is a 15 inch inflatable marine fender designed for heavy duty docking and mooring protection. Built from flexible, resilient marine-grade vinyl, this fender uses a seamless one-piece construction rather than multiple bonded seams, which reduces the risk of leaks or seam failure over repeated use. Each end is injection molded and tested to 2000 psi tensile strength, and the ends feature large line holes sized to accept most ropes and standard shackles for easy rigging.\u003c\/p\u003e\u003cp\u003eInflation is handled through a tri-valve (Trivalve) system, which allows the fender to be filled with a standard ball pump, a football needle, or an air compressor, giving boat owners flexibility depending on what inflation equipment they already have on hand. The 15 inch diameter model measures 47 inches in circumference and has a 1-1\/16 inch line hole diameter. It is made in the USA for demanding marine applications and is finished in white to match most hull colors. This fender is suited to boat owners who want a durable, low-maintenance round fender for dock protection or mooring buoy use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1146\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 15 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircumference:\u003c\/strong\u003e 47 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Hole Diameter:\u003c\/strong\u003e 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Seamless one-piece construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Tri-valve, inflates with standard ball pump, football needle, or air compressor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Cap Tensile Strength:\u003c\/strong\u003e Tested to 2000 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011311467\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made 1146 fender buoy?\u003c\/strong\u003e The 1146 is a 15 inch diameter round fender with a circumference of 47 inches and a 1-1\/16 inch line hole diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fender weigh?\u003c\/strong\u003e The Taylor Made 1146 Tuff End round fender weighs 4.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the fender made from?\u003c\/strong\u003e It is made from flexible, resilient marine-grade vinyl with a seamless one-piece construction rather than bonded seams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you inflate this fender?\u003c\/strong\u003e The 1146 uses a tri-valve (Trivalve) system, which can be inflated with a standard ball pump, a football needle, or an air compressor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options are available?\u003c\/strong\u003e The 1146 model of the Tuff End round fender is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the ends of the fender durable?\u003c\/strong\u003e Yes, the injection molded ends on the Taylor Made 1146 fender are tested to 2000 psi tensile strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill ropes and shackles fit through the line holes?\u003c\/strong\u003e The line holes on the 1146 round fender are sized to accept most ropes and standard shackles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fender made in the USA?\u003c\/strong\u003e Yes, the Taylor Made 1146 Tuff End fender is made in the USA for heavy duty marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender be used as a mooring buoy?\u003c\/strong\u003e Yes, the Tuff End 1146 round fender is built for heavy duty marine applications and can serve as a mooring buoy or dock fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the fender a single sealed piece or assembled from parts?\u003c\/strong\u003e The 1146 fender has a seamless one-piece construction, unlike fenders assembled from multiple bonded seams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 1146 fender?\u003c\/strong\u003e Ordering the Taylor Made 1146 includes one 15 inch Tuff End round fender in white; no pump or rope is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1146 a genuine Taylor Made Products part?\u003c\/strong\u003e Yes, part number 1146 is a genuine Taylor Made Products Tuff End round fender, not an aftermarket copy.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989665722587,"sku":"NAT-1146","price":59.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71jA1XSEf4L_8bab8023-6805-4ffc-81a0-98336a683bf1.jpg?v=1784486531"},{"product_id":"taylor-made-1149-tuff-end-18-round-inflatable-boat-fender-white","title":"Taylor Made Products 1149 Tuff End Round Buoy\/Fender, White, 18 Inch Diameter","description":"\u003cp\u003eThe Taylor Made Products 1149 is an 18 inch diameter round Tuff End buoy and fender built from flexible, resilient marine-grade vinyl. Its seamless one-piece construction eliminates weak seams, and the injection molded ends are tested to withstand 2000 psi of tensile strength, giving it the durability to handle repeated contact and mooring use. Large line holes at each end accommodate most ropes and shackles, making it easy to rig as a mooring buoy or hang it as a fender.\u003c\/p\u003e\u003cp\u003eInflation is handled through a Tri-valve system, so it can be filled with a standard football needle or an air compressor, whichever is on hand. The 18 inch model has a circumference of 57 inches, a 1-1\/2 inch rope\/eye hole, and provides 112 pounds of buoyancy, making it suitable for marking a mooring or cushioning a hull. It is manufactured in the USA to standards intended for the demands of heavy duty marine use, and it is finished in white for high visibility on the water.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1149\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircumference:\u003c\/strong\u003e 57 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope\/Eye Hole Diameter:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuoyancy:\u003c\/strong\u003e 112 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Seamless one-piece, injection molded ends tested to 2000 psi tensile strength\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation Valve:\u003c\/strong\u003e Tri-valve (football needle or compressor)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.76 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011311498\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the diameter of the Taylor Made Products 1149 buoy?\u003c\/strong\u003e The 1149 measures 18 inches in diameter with a circumference of 57 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much buoyancy does the Taylor Made 1149 provide?\u003c\/strong\u003e It provides 112 pounds of buoyancy, which is the rating for this 18 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you inflate the Taylor Made 1149 buoy?\u003c\/strong\u003e It uses a Tri-valve system, so it can be inflated with a standard football needle or an air compressor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Taylor Made 1149 made from?\u003c\/strong\u003e It is constructed from flexible, resilient marine-grade vinyl with a seamless one-piece body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow strong are the ends of the Taylor Made 1149?\u003c\/strong\u003e The injection molded ends of the 1149 are tested to withstand 2000 psi of tensile strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Taylor Made 1149 be used as both a fender and a mooring buoy?\u003c\/strong\u003e Yes, the round Tuff End design of the 1149 works both as a hanging fender and as a mooring buoy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size rope or shackle fits the Taylor Made 1149?\u003c\/strong\u003e The 1149 has a 1-1\/2 inch line hole sized to fit most ropes and shackles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options are available for the Taylor Made 1149?\u003c\/strong\u003e The 1149 is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Taylor Made 1149 manufactured?\u003c\/strong\u003e The 1149 is manufactured in the USA for heavy duty marine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made 1149 weigh?\u003c\/strong\u003e The 1149 weighs 6.76 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1149 sold inflated or deflated?\u003c\/strong\u003e Being Tri-valve inflatable, the 1149 is designed to be inflated on site using a football needle or compressor rather than shipped fully inflated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made 1149?\u003c\/strong\u003e The UPC for the 18 inch white 1149 is 040011311498.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989665853659,"sku":"NAT-1149","price":78.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71jA1XSEf4L_3b8d2de2-42c1-47bc-8dcc-dcaa2672eb16.jpg?v=1784486546"},{"product_id":"taylor-made-1152-tuff-end-inflatable-round-boat-fender-white-21-in-diameter-112-lb-buoyancy","title":"Taylor Made Tuff End Round Fender, 21 Inch, White, 112 lb Capacity","description":"\u003cp\u003eThe Taylor Made Tuff End Round Fender (part number 1152) is a 21 inch marine-grade vinyl fender built for boats that need a durable, high-capacity buoy for mooring or dockside protection. It is finished in white and constructed as a seamless one-piece vinyl shell, which Taylor Made uses across its Tuff End line to eliminate the seams that are typically the first failure point on lower-cost fenders. The ends are injection molded and tested to 2000 psi tensile strength, giving the fender the toughness to hold up against repeated contact with pilings, docks, and other hulls.\u003c\/p\u003e\u003cp\u003eThis fender measures 21 inches in diameter with a 66 inch circumference and is rated for a 112 pound weight capacity, making it suited to boats that need a larger-capacity round fender than Taylor Made's smaller Tuff End sizes. It is designed to be rigged with 1-1\/2 inch line, and large line holes at each end accept most ropes and standard shackles for quick tie-off. Inflation is handled through a tri-valve, so it can be filled with a standard ball pump, a football needle, or an air compressor, whichever is on hand at the dock. The complete fender weighs 9.34 pounds as shipped.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1152\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e 61152\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 21 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircumference:\u003c\/strong\u003e 66 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Line Size:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Capacity:\u003c\/strong\u003e 112 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Weight:\u003c\/strong\u003e 9.34 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Seamless one-piece body with injection molded ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation Valve:\u003c\/strong\u003e Tri-valve (ball pump, football needle, or compressor)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Round Fenders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Taylor Made 1152 round fender meant for?\u003c\/strong\u003e The 1152 is a 21 inch diameter round fender rated for a 112 pound weight capacity, which puts it in the larger-capacity end of Taylor Made's Tuff End round fender lineup for boats that need more cushioning and load support than a small fender can provide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is this fender exactly?\u003c\/strong\u003e Taylor Made part number 1152 measures 21 inches in diameter with a 66 inch circumference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat line size should I use to rig this fender?\u003c\/strong\u003e Taylor Made recommends 1-1\/2 inch line for the 1152 round fender, and the large line holes molded into each end accept most ropes and standard shackles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 1152 fender made of?\u003c\/strong\u003e It is built from marine-grade vinyl in a seamless one-piece construction, which avoids the seam failures common on lower-quality fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you inflate this fender?\u003c\/strong\u003e The 1152 uses a tri-valve, so it can be inflated with a standard ball pump, a football inflation needle, or an air compressor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the fender weigh?\u003c\/strong\u003e The Taylor Made 1152 round fender weighs 9.34 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat weight capacity is this fender rated for?\u003c\/strong\u003e Part number 1152 carries a 112 pound weight capacity rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part number 61152 the same fender as 1152?\u003c\/strong\u003e 61152 is the alternate part number listed alongside 1152 for this same 21 inch round fender, so buyers may see either number referencing this product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this fender come in?\u003c\/strong\u003e The 1152 round fender is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow durable are the ends of this fender?\u003c\/strong\u003e The injection molded ends on the Tuff End construction used for part 1152 are tested to 2000 psi tensile strength for added durability against dock and hull contact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fender work as a mooring buoy?\u003c\/strong\u003e Yes, the round shape, 1-1\/2 inch line rigging, and 112 pound capacity of the 1152 make it suitable for use as a mooring buoy in addition to a dockside fender.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989666246875,"sku":"NAT-1152","price":221.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71jA1XSEf4L_075c06d0-103f-42f3-919b-4d2f45656090.jpg?v=1784486573"},{"product_id":"taylor-made-1185-tuff-end-inflatable-boat-fender-8-x-27-white-fits-boats-25-to-40-ft","title":"Taylor Made Tuff End Fender 1185, 8 Inch x 27 Inch White Vinyl Boat Fender for 25-40 Foot Boats","description":"\u003cp\u003eThe Taylor Made Tuff End Fender (part number 1185) is an 8 inch x 27 inch inflatable vinyl boat fender designed to protect hulls from dock and piling contact during mooring. It is built from flexible, resilient marine grade vinyl using a seamless one-piece construction, which Taylor Made states is the strongest fender construction in the industry since there are no seams to fail under repeated compression. Each end is injection molded and tested to 2000 psi tensile strength, giving the fender durability at the points that see the most wear. Twin eyes are molded into the fender, allowing it to be hung either vertically or horizontally depending on how much freeboard protection a boat needs. Inflation and deflation are handled through a tri-valve, which accepts a standard football inflation needle or an air compressor; Taylor Made recommends inflating this fender to 2 psi. The line holes on this 8 inch diameter fender measure 1-1\/16 inch, sized to accommodate most dock lines and shackles. This fender is recommended for boats in the 25 to 40 foot range, though the best way to confirm the right size is to compare against fenders already in use at the same dock for boats of similar size and weight. It is finished in white and manufactured in the USA for heavy duty marine use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1185\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 27 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.86 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Hole Diameter:\u003c\/strong\u003e 1-1\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Tri-valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Inflation Pressure:\u003c\/strong\u003e 2 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 25 to 40 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Seamless one-piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Twin eyes, vertical or horizontal hanging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011311856\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Taylor Made 1185 fender designed for?\u003c\/strong\u003e The Taylor Made Tuff End Fender 1185 is recommended for boats in the 25 to 40 foot range, though the best way to confirm sizing is to compare against fenders already in use at your dock for boats of similar size and weight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of fender 1185?\u003c\/strong\u003e Fender 1185 measures 8 inches in diameter by 27 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made 1185 fender weigh?\u003c\/strong\u003e This fender weighs 3.86 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Tuff End Fender made from?\u003c\/strong\u003e It is constructed from flexible, resilient marine grade vinyl in a seamless one-piece design, which Taylor Made states is the strongest fender construction in the industry since it has no seams to fail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I inflate the 1185 fender?\u003c\/strong\u003e Fender 1185 uses a tri-valve that accepts a standard football inflation needle or an air compressor, and Taylor Made recommends inflating it to 2 psi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender be hung horizontally as well as vertically?\u003c\/strong\u003e Yes, the 1185 fender has twin eyes molded into it, allowing it to be hung either vertically or horizontally depending on the protection needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size line or shackle fits through the fender's line holes?\u003c\/strong\u003e The 8 inch diameter Tuff End Fender has a line hole diameter of 1-1\/16 inch, sized to fit most dock lines and shackles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow durable are the ends of this fender?\u003c\/strong\u003e The 1185 fender has injection molded ends that are tested to 2000 psi tensile strength for added durability at the points that see the most wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the Taylor Made 1185 fender come in?\u003c\/strong\u003e This Tuff End Fender is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made Tuff End Fender made in the USA?\u003c\/strong\u003e Yes, fender 1185 is made in the USA for heavy duty marine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with part number 1185?\u003c\/strong\u003e Ordering part number 1185 includes one Tuff End Fender, uninflated, ready to be filled to the recommended 2 psi before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if the 1185 is the right size fender for my dock?\u003c\/strong\u003e Taylor Made recommends surveying your docking area to see what fender size and quantity is used for boats of similar size and weight to yours, and using that as a guideline when choosing between the 1185 and other Tuff End Fender sizes.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989666705627,"sku":"NAT-1185","price":86.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51fSad4VJnL.jpg?v=1784486610"},{"product_id":"taylor-made-products-1188-tuff-end-inflatable-boat-fender-10-x-30-white-fits-40-to-50-ft-boats","title":"Taylor Made Products 1188 Tuff End Inflatable Vinyl Boat Fender, 10 Inch x 30 Inch, White","description":"\u003cp\u003eThe Taylor Made Products 1188 Tuff End fender is a 10 inch x 30 inch inflatable cylindrical boat fender built to protect hulls in the 40 foot to 50 foot range while docking or rafting up. It is constructed from flexible, resilient marine grade vinyl in a seamless one piece design, which Taylor Made states is the strongest construction method in the industry because there are no seams to fail under repeated compression against a dock or piling.\u003c\/p\u003e\u003cp\u003eEach end is injection molded and tested to 2000 psi tensile strength, giving the fender durability at the points that see the most wear. A tri-valve system allows for quick inflation with either a standard football needle or an air compressor, and the recommended inflation pressure is 2 psi. The fender has a large line hole, 1-1\/2 inches in diameter on this 10 x 30 size, sized to accommodate most dock lines and shackles without a separate rope-through kit.\u003c\/p\u003e\u003cp\u003eThe 1188 is finished in white and is made in the USA for heavy duty marine applications. Taylor Made recommends choosing a fender size and quantity by surveying similar boats of the same size and weight already docked in your area and matching that setup, since fender needs vary by boat weight, hull shape, and dock conditions in addition to length.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1188\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Cylindrical Fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10 inches x 30 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Hole Diameter:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 40 feet to 50 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.85 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Inflation Pressure:\u003c\/strong\u003e 2 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Seamless one piece construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Tri-valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Tensile Strength:\u003c\/strong\u003e Injection molded ends tested to 2000 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011311887\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Taylor Made 1188 fender designed for?\u003c\/strong\u003e The 10 inch x 30 inch size of this Tuff End fender is recommended for boats in the 40 foot to 50 foot range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Taylor Made 1188 fender made from?\u003c\/strong\u003e It is made from flexible, resilient marine grade vinyl in a seamless one piece construction, so there are no seams to fail under repeated compression against a dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I inflate the 1188 Tuff End fender?\u003c\/strong\u003e A tri-valve on the fender allows inflation with either a football-style inflation needle or an air compressor, with 2 psi as the recommended inflation pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is the line hole on the 10 x 30 inch Tuff End fender?\u003c\/strong\u003e This size has a 1-1\/2 inch diameter line hole, large enough to fit most dock lines and shackles without an additional rope-through kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1188 fender made in the USA?\u003c\/strong\u003e Yes, the Taylor Made Products Tuff End fender, part number 1188, is made in the USA for heavy duty marine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow durable are the ends of the Tuff End fender?\u003c\/strong\u003e The ends are injection molded and tested to 2000 psi tensile strength, which is where fenders typically see the most wear from repeated dock contact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 1188 fender come in?\u003c\/strong\u003e Part number 1188 is the white version of the Taylor Made Tuff End fender in the 10 x 30 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made 1188 fender weigh?\u003c\/strong\u003e The 10 x 30 inch Tuff End fender, model 1188, weighs 5.85 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know what fender size to buy?\u003c\/strong\u003e Taylor Made recommends surveying your docking area to see what fender size and quantity are used on boats similar in size and weight to yours, and using that as a guideline for the 1188 or other Tuff End sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Tuff End fender a genuine Taylor Made product?\u003c\/strong\u003e Yes, part number 1188 is a genuine Taylor Made Products Tuff End fender, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the 1188 fender?\u003c\/strong\u003e The 1188 listing includes one Tuff End fender; it ships uninflated and is inflated after purchase using the tri-valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 10 x 30 inch fender different from other Tuff End sizes?\u003c\/strong\u003e The 1188 in 10 x 30 inches is sized for 40 to 50 foot boats, larger than Taylor Made's 8 x 27 inch fender sized for 25 to 40 foot boats and smaller than its 19 x 50 inch fender.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989666935003,"sku":"NAT-1188","price":135.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51fSad4VJnL_7f85e84b-0684-4b69-b9d4-f732976b2b12.jpg?v=1784486620"},{"product_id":"taylor-made-products-1191-tuff-end-inflatable-vinyl-boat-fender-12-x-35-white-for-50-60-ft-boats","title":"Taylor Made Products 1191 Tuff End Inflatable Vinyl Boat Fender, White, 12 x 35 Inches, Fits Boats 50 to 60 Feet","description":"\u003cp\u003eThe Taylor Made Products 1191 Tuff End is an inflatable vinyl boat fender sized 12 inches x 35 inches, built to cushion boats between 50 feet and 60 feet from dock and hull impacts. The fender uses seamless one piece construction, making it one of the strongest fender builds available, with no seams to fail under repeated compression against a dock or piling. Its injection molded ends are tested to 2000 psi tensile strength, giving the fender durability at the points where it takes the most abuse. A tri-valve fitting allows for easy inflation with a standard football needle or an air compressor, and Taylor Made recommends inflating the fender to 2 psi. A large 1-1\/2 inch line hole accommodates most dock lines and shackles for hanging the fender from a rail or cleat. The fender body is made from flexible, resilient marine grade vinyl that resists wear and water damage over repeated use. This particular fender is finished in white and carries the 1191 model number; Taylor Made also offers this same fender in other colors, which are ordered by adding a color-number prefix to the item number. The Tuff End 1191 is made in the USA for heavy duty marine applications and is intended for boats in the 50 to 60 foot range, where its 12 x 35 inch profile provides adequate standoff and cushioning.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1191\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Cylindrical Boat Fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 12 inches x 35 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Hole Diameter:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 50 feet to 60 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.62 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Snap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Seamless one piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Strength:\u003c\/strong\u003e Injection molded ends tested to 2000 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Inflation Pressure:\u003c\/strong\u003e 2 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011311917\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Taylor Made 1191 fender designed for?\u003c\/strong\u003e The Taylor Made Products 1191 Tuff End fender is recommended for boats in the 50 foot to 60 foot range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 1191 fender?\u003c\/strong\u003e The 1191 measures 12 inches x 35 inches and is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fender made from?\u003c\/strong\u003e It is constructed from flexible, resilient marine grade vinyl with seamless one piece construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1191 fender weigh?\u003c\/strong\u003e The Taylor Made 1191 fender weighs 7.62 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I inflate the Tuff End fender?\u003c\/strong\u003e A tri-valve fitting lets you inflate the 1191 with a standard football needle or an air compressor; Taylor Made recommends inflating to 2 psi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size line hole does the 1191 fender have?\u003c\/strong\u003e The 1191 has a 1-1\/2 inch line hole to accommodate most dock lines and shackles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow durable are the ends of this fender?\u003c\/strong\u003e The injection molded ends of the Taylor Made 1191 are tested to 2000 psi tensile strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1191 fender available in other colors?\u003c\/strong\u003e Yes, the Tuff End fender is available in other colors in addition to the white 1191; other colors are ordered by adding a color-number prefix to the item number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Taylor Made 1191 fender manufactured?\u003c\/strong\u003e The Tuff End 1191 fender is made in the USA for heavy duty marine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1191 fender have seams that could fail?\u003c\/strong\u003e No, the 1191 uses seamless one piece construction, which Taylor Made states is the strongest fender construction in the industry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I choose the right size fender for my boat?\u003c\/strong\u003e The most accurate way to select a fender size, including the 12 x 35 inch 1191, is to survey your docking area for the fender size and quantity used on boats of similar size and weight and use that as a guideline.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989667033307,"sku":"NAT-1191","price":149.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51fSad4VJnL_6e082301-136d-4056-99d6-d82771a8e8dd.jpg?v=1784486624"},{"product_id":"taylor-made-22120-sully-stick-winter-mooring-buoy-6-d-x-31-l-white-with-reflective-blue-stripe","title":"Taylor Made Products Sully Stick Winter Mooring Buoy 22120, White, 6 Inch x 31 Inch","description":"\u003cp\u003eThe Taylor Made Products Sully Stick Winter Stick (part number 22120) is a tapered spar buoy built to mark a mooring position through the winter season, when standard round mooring buoys risk damage from ice entrapment. Made of closed cell foam that positively displaces water to maintain buoyancy, the Sully Stick measures 6 inches at its widest point and stands 31 inches long. Its tapered shape helps it rise above the ice line rather than getting trapped and crushed the way a conventional round buoy can.\u003c\/p\u003e\u003cp\u003eThe buoy is finished in white with a reflective blue stripe for visibility, and the base eyelet is reinforced with a galvanized metal bushing so a rope can be securely tied off to the anchor chain through the 1-1\/2 inch molded hole. The Sully Stick itself carries no internal ballast weight, so it requires 6-1\/2 pounds of additional chain weight attached at the base to stand vertical in the water. Once set, it sits 18 inches above the water line and carries a buoyancy rating of 15 pounds. A larger version, part number 22140, is available as a separate item for boaters who need greater visibility above the water line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 22120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Winter Mooring Buoy (Sully Stick)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Closed Cell Foam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White with Reflective Blue Stripe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 6 inches (widest point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 31 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight Above Water Line:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuoyancy Rating:\u003c\/strong\u003e 15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMolded Hole Size:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional Chain Weight Required:\u003c\/strong\u003e 6-1\/2 pounds (to stand vertical)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Sully Stick used for?\u003c\/strong\u003e Part number 22120 is a tapered spar buoy designed to mark a mooring position during the winter months, replacing a standard round mooring buoy that risks damage from ice entrapment in freezing water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the 22120 Sully Stick?\u003c\/strong\u003e It measures 6 inches at its widest point and 31 inches in length, sitting 18 inches above the water line once installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much buoyancy does the 22120 provide?\u003c\/strong\u003e The 22120 Sully Stick carries a buoyancy rating of 15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sully Stick include ballast weight to stand upright?\u003c\/strong\u003e No, the 22120 has no internal ballast weight built in; it requires 6-1\/2 pounds of additional chain weight attached at the base to stand vertical in the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sully Stick made of?\u003c\/strong\u003e The Taylor Made Sully Stick 22120 is made of closed cell foam, which positively displaces water to maintain buoyancy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you attach the Sully Stick to a mooring chain?\u003c\/strong\u003e A rope is tied through the 1-1\/2 inch molded hole at the base, which is reinforced with a galvanized metal bushing, and then connected to the anchor chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 22120 Sully Stick?\u003c\/strong\u003e It is white with a reflective blue stripe for visibility in low light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 22120 Sully Stick weigh?\u003c\/strong\u003e The 22120 Sully Stick weighs 3.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a larger version of the Sully Stick available?\u003c\/strong\u003e Yes, Taylor Made offers part number 22140 as a separate, larger Sully Stick for boaters who need greater visibility above the water line; it is a different part number from the 22120.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Taylor Made Sully Stick made?\u003c\/strong\u003e The 22120 Sully Stick is manufactured in the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Sully Stick replace a standard mooring buoy year-round?\u003c\/strong\u003e The 22120 Sully Stick is intended for winter use, extending the life of a traditional mooring buoy by standing in for it during the harsh winter months and freezing water temperatures.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989669785819,"sku":"NAT-22120","price":74.17,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41BMZQ_Gh1L.jpg?v=1784486808"},{"product_id":"taylor-made-22140-large-sully-stick-80-mooring-buoy-traditional-sur-moor-spar-buoy-with-galvanized-retrieval-grommet","title":"Taylor Made Products Sur-Moor Mooring Buoy 22140, 80 Inch Stick Buoy, 18 Inch Diameter","description":"\u003cp\u003eThe Taylor Made Products Sur-Moor mooring buoy (part number 22140) is a traditional stick-style buoy built to mark a mooring line and keep it visible and accessible at the surface. Measuring 80 inches long with an 18 inch diameter and a widest point of 6 inches, this is a larger-size buoy suited to boats and mooring setups that need a substantial, highly visible marker. The buoy's molded body has a 1-1\/2 inch hole for running the mooring line through, and it is fitted with a 1.725 inch reinforced galvanized grommet that makes it easy to grab and retrieve the line from the water. At 15 pounds, the buoy is sized to be handled at the dock or from the deck while still standing up well in open water. As part of Taylor Made Products' traditional Sur-Moor mooring buoy line, it is designed for straightforward, reliable use as a mooring line float, helping boaters locate and retrieve their mooring quickly. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 22140\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Sur-Moor Mooring Buoy (Traditional)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 80 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidest Point:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMolded Hole:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetrieval Grommet:\u003c\/strong\u003e 1.725 inches, reinforced galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011736550\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Mooring Buoys\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made Sur-Moor mooring buoy 22140?\u003c\/strong\u003e The 22140 mooring buoy is 80 inches long with an 18 inch diameter and a widest point of 6 inches, making it one of the larger stick-style buoys in the Sur-Moor line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does mooring buoy 22140 weigh?\u003c\/strong\u003e This Taylor Made Products Sur-Moor buoy weighs 15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole does the buoy have for the mooring line?\u003c\/strong\u003e Buoy 22140 has a 1-1\/2 inch molded hole for running the mooring line through the body of the buoy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the retrieval grommet made of on this buoy?\u003c\/strong\u003e A reinforced galvanized grommet measuring 1.725 inches is fitted to the 22140 buoy to make grabbing and retrieving the mooring line easier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a stick-style mooring buoy?\u003c\/strong\u003e Yes, the 22140 is a traditional Sur-Moor stick-style mooring buoy from Taylor Made Products, measuring 80 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes this mooring buoy?\u003c\/strong\u003e This mooring buoy, part number 22140, is manufactured by Taylor Made Products as part of its traditional Sur-Moor line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the widest point of the 22140 buoy?\u003c\/strong\u003e The widest point of the Taylor Made Sur-Moor buoy 22140 is 6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is buoy 22140 used for?\u003c\/strong\u003e It is used to mark and float a boat's mooring line at the surface, keeping it visible and easy to retrieve; buoy 22140 is sized for larger mooring setups given its 80 inch length and 18 inch diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 22140 buoy come with a UPC for retail tracking?\u003c\/strong\u003e Yes, the Taylor Made Sur-Moor mooring buoy 22140 carries UPC 040011736550.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 22140 mooring buoy suitable for larger boats?\u003c\/strong\u003e With its 80 inch length and 18 inch diameter, the 22140 buoy is one of the larger sizes in the Sur-Moor mooring buoy line, suited to mooring setups that need a substantial, highly visible marker.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the grommet on the Sur-Moor buoy 22140?\u003c\/strong\u003e The grommet on buoy 22140 is reinforced galvanized metal, measuring 1.725 inches.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989670015195,"sku":"NAT-22140","price":99.42,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_f6fddc2e-0d52-421f-ade5-44be23bd65ad.jpg?v=1785351794"},{"product_id":"taylor-made-310162p-boat-fender-kit-6-in-x-22-in-white-fender-pair-with-black-6-ft-floating-lines","title":"Taylor Made 310162P Cylindrical Fender Kit, 6 x 22 Inch, White with Black Rope, Pair","description":"\u003cp\u003eThe Taylor Made 310162P is a cylindrical fender kit sized 6 x 22 inches, sold as a matched pair to protect both sides of a boat's hull from dock and piling contact. Each fender is molded from tough UV-resistant marine vinyl designed to withstand sun exposure, saltwater, and repeated rubbing against docks without cracking or fading. Raised ribs run along the body of each fender to help it roll and absorb impact rather than scuff the hull finish, reducing wear on gelcoat during mooring and tie-up. Inflation is handled through a needle-style valve, letting owners adjust firmness with a standard needle pump rather than a specialty tool. Each fender in the kit comes with its own 6 foot floating fender line already sized for hanging off a rail or cleat, so the pair is ready to deploy without buying line separately. The fenders are finished in white with black rope, a common two-tone combination that is easy to match to most hull colors and shows dirt less readily than an all-white line. At 3.6 pounds for the kit, they are light enough to move and stow by hand but substantial enough to cushion real dock contact. This kit suits runabouts, cruisers, and other recreational boats that need a dependable pair of round fenders for routine docking and slip storage.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 310162P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Cylindrical boat fender kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 6 x 22 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair (2 fenders)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Line Length:\u003c\/strong\u003e 6 feet, floating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-resistant marine vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation Valve Type:\u003c\/strong\u003e Needle inflation valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011919076\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made 310162P fender?\u003c\/strong\u003e Each fender in the Taylor Made 310162P kit measures 6 x 22 inches, sized for typical runabouts and cruisers using round dock fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fenders come in the 310162P kit?\u003c\/strong\u003e The 310162P kit includes a pair of two fenders, each with its own fender line, so both sides of the hull can be protected at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this fender kit?\u003c\/strong\u003e This kit is white with a black rope, a two-tone combination that pairs well with most hull colors while keeping the line visually distinct.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the fender line included with the 310162P?\u003c\/strong\u003e Each fender ships with its own 6 foot floating fender line, ready to tie off to a rail or cleat without needing separate line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Taylor Made 310162P made from?\u003c\/strong\u003e The 310162P fenders are made of tough, UV-resistant marine vinyl built to hold up to sun and saltwater exposure over repeated dockside use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you inflate the 310162P fender?\u003c\/strong\u003e Inflation is done through a needle-style valve, so a standard needle inflation pump can be used to adjust each fender's firmness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do these fenders have ribs on the body?\u003c\/strong\u003e The ribs on the Taylor Made 310162P help the fender roll against a dock or piling instead of dragging, which reduces scuffing on the hull finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 310162P fender kit weigh?\u003c\/strong\u003e The complete pair weighs 3.6 pounds, light enough to handle and stow easily between uses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 310162P sold as a single fender or a pair?\u003c\/strong\u003e It is sold as a pair, meaning one 310162P purchase covers both fenders needed to protect either side of the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Taylor Made 310162P kit?\u003c\/strong\u003e The kit includes two 6 x 22 inch fenders in white with black rope, each with its own 6 foot floating fender line attached or included.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989670080731,"sku":"NAT-310162P","price":79.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61dzWcSfZ1L.jpg?v=1784486826"},{"product_id":"taylor-made-products-31006-low-freeboard-boat-fender-5-x-14-metallic-black-square-anti-roll-marine-vinyl-fender-for-fishing-and-bass-boats","title":"Taylor Made Products 31006 Low Freeboard Boat Fender, 5 x 14 Inch, Metallic Black","description":"\u003cp\u003eThe Taylor Made Products 31006 Low Freeboard Fender is a square-shaped boat fender designed specifically for low freeboard boats, where standard round fenders tend to roll out of place and leave the hull exposed. Its unique square profile holds the fender in position against the gunwale and rubrail, offering superior protection compared to regular round fenders, especially against high docks. The fender can also be tied over the cleat to raise its position on the boat, placing protection exactly where it is needed.\u003c\/p\u003e\u003cp\u003eConstructed from heavy-duty, marine-grade vinyl, this fender is built to withstand the demands of everyday use on the water. It includes a rubber football-style inflation valve, allowing for easy air pressure adjustment and helping extend the life of the fender. This 5 inch x 14 inch size is finished in metallic black and is manufactured in the USA by Taylor Made, a trusted name in boat fenders.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 31006\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Low Freeboard Boat Fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5 inches x 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Metallic Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Heavy-duty, marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation:\u003c\/strong\u003e Rubber football needle valve for air pressure adjustment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit for low freeboard boats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for low freeboard boats; also compatible for use alongside other brand fenders.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made 31006 fender?\u003c\/strong\u003e The Taylor Made Products 31006 Low Freeboard Fender measures 5 inches by 14 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fender fit any boat?\u003c\/strong\u003e Yes, the 31006 Low Freeboard Fender has a universal fit and is designed specifically for low freeboard boats, though it is also compatible for use alongside other brand fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 31006?\u003c\/strong\u003e Part number 31006 is finished in metallic black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is this fender square instead of round?\u003c\/strong\u003e The square shape of the Taylor Made Low Freeboard Fender holds it in position better than a round fender and prevents it from rolling out of place, giving improved protection to the gunwale and rubrail on low freeboard boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the fender made from?\u003c\/strong\u003e It is constructed from heavy-duty, marine-grade vinyl designed to hold up to regular use on the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you inflate the fender?\u003c\/strong\u003e The 31006 fender includes a rubber football-style inflation valve that allows you to adjust air pressure as needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the fender be positioned higher on the hull for protection against high docks?\u003c\/strong\u003e Yes, the Taylor Made 31006 fender can be tied over the cleat to raise its position, providing better protection against high docks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 31006 fender weigh?\u003c\/strong\u003e The Taylor Made 31006 Low Freeboard Fender weighs 1.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fender made in the USA?\u003c\/strong\u003e Yes, the Taylor Made 31006 fender is manufactured in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other colors is this fender available in?\u003c\/strong\u003e The 5 inch x 14 inch Low Freeboard Fender is also offered in white (31005), camouflage (31043), and metallic red (31055), with part number 31006 being the metallic black version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from a standard round boat fender?\u003c\/strong\u003e Unlike a standard round fender, the square-shaped Taylor Made Low Freeboard Fender resists rolling out of place and offers increased protection specifically shaped for the gunwales and rubrail of low freeboard boats.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989670179035,"sku":"NAT-31006","price":30.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71vLi_EjSKS.jpg?v=1784486837"},{"product_id":"taylor-made-products-31016b2p-boat-fender-kit-6-x-22-cylindrical-fenders-with-ropes-black-2-pack","title":"Taylor Made 31016B2P Boat Fender Kit, 6 x 22 Inch, Black with Black Line, Pair","description":"\u003cp\u003eThe Taylor Made 31016B2P Fender Kit is a pair of 6 inch x 22 inch cylindrical boat fenders in black, each fitted with a 6 foot black floating fender line. Built from tough UV-resistant marine vinyl, the fenders are designed to withstand sun exposure and repeated contact with docks and other hulls without cracking or fading. Molded ribs run the length of each fender to help it roll along pilings and dock edges, cushioning contact and reducing hull scuffing instead of dragging or catching. Each fender inflates through a needle-style inflation valve, allowing quick firmness adjustment with a standard needle pump. The included black rope fender lines float, making them easy to retrieve if dropped overboard, and are ready to tie off to a rail or cleat without needing to source separate line. This kit includes two fenders and two lines, giving boaters a matched pair for use on both sides of the hull. The 6 x 22 inch size suits smaller to mid-size boats needing reliable side protection at the dock or when rafting up. As a complete two-piece kit, it is a straightforward way to add a matched set of fenders and lines in one purchase.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 31016B2P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Boat Fender Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Diameter:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Length:\u003c\/strong\u003e 22 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Line Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Line Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 fenders with lines (pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011919090\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Needle inflation valve\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the fenders in this kit?\u003c\/strong\u003e Each fender in the Taylor Made 31016B2P kit measures 6 inches in diameter by 22 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fenders come in the 31016B2P kit?\u003c\/strong\u003e The kit includes a pair of two fenders, each with its own fender line, so you get both fenders you need for one side of the boat or one for each side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the fenders and lines?\u003c\/strong\u003e Both the fenders and the fender lines in this kit are black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the fender lines float?\u003c\/strong\u003e Yes, the 6 foot fender lines included with the 31016B2P kit are floating lines, so they are easy to retrieve if dropped in the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the fenders made from?\u003c\/strong\u003e The Taylor Made 31016B2P fenders are made from tough UV marine vinyl designed to resist sun exposure and repeated dock contact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you inflate these fenders?\u003c\/strong\u003e Each fender uses a needle-style inflation valve, so it can be inflated with a standard needle air pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do the fenders have ribs on them?\u003c\/strong\u003e The ribbed surface on the 31016B2P fenders helps them roll along pilings and dock edges instead of dragging, which reduces scuffing on the hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fender kit weigh?\u003c\/strong\u003e The Taylor Made 31016B2P Fender Kit weighs 3.6 pounds total for the pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs fender line included, or do I need to buy it separately?\u003c\/strong\u003e Fender line is included. Each fender in the 31016B2P kit comes with its own 6 foot black floating line already provided.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats are these fenders suited for?\u003c\/strong\u003e The 6 x 22 inch size of the 31016B2P fenders suits smaller to mid-size boats that need side protection at the dock or when rafting up.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989670244571,"sku":"NAT-31016B2P","price":79.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/513Uwk3GgjL.jpg?v=1784486841"},{"product_id":"taylor-made-31005-low-freeboard-boat-fender-5-x-14-white-square-anti-roll-design-for-bass-boats-and-low-gunwale-hulls","title":"Taylor Made Products 31005 Low Freeboard Boat Fender, White, 5 x 14 Inches","description":"\u003cp\u003eThe Taylor Made Products 31005 is a Low Freeboard boat fender built to protect boats that sit close to the waterline, where standard round fenders tend to roll out of position. Its square, form-fitting shape holds the fender securely against the hull, keeping protection where it is needed most along the gunwales and rubrail. This design also allows the fender to be tied over the cleat, letting boat owners position it higher on the boat for better coverage against high docks and pilings.\u003c\/p\u003e\u003cp\u003eConstructed from heavy-duty, marine grade vinyl, the 31005 is built to withstand repeated exposure to sun, water, and dock friction. It is equipped with a rubber football needle valve for straightforward air pressure adjustment and easy inflation, supporting a longer service life. The fender measures 5 x 14 inches and weighs 1.7 pounds, and it is finished in white to suit a wide range of boats. Each unit is manufactured in the USA.\u003c\/p\u003e\u003cp\u003eThis fender is a straightforward fit for any boat that needs low-freeboard protection, including bass boats and other low-sitting fishing boats, and works as a standalone fender or alongside other Taylor Made fenders for full-length hull coverage.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 31005\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5 x 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Square, low freeboard design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation Valve:\u003c\/strong\u003e Rubber football needle valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Boats, including low freeboard and bass boats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011310057\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made 31005 boat fender?\u003c\/strong\u003e The Taylor Made 31005 measures 5 x 14 inches, making it the standard size in the Low Freeboard fender lineup, and it weighs 1.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes a Low Freeboard fender different from a regular round fender?\u003c\/strong\u003e The 31005 has a square, form-fitting shape designed to wrap against the hull of low freeboard boats, which holds it in position better and prevents it from rolling out of place the way a standard round fender can.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 31005 fender made from?\u003c\/strong\u003e It is made from heavy-duty, marine grade vinyl designed to hold up to repeated exposure to sun, water, and dock contact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 31005 be tied higher on the boat for protection against tall docks?\u003c\/strong\u003e Yes, the square shape of the 31005 allows it to be tied over the cleat, which raises its position on the boat for added protection against high docks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you inflate the Taylor Made 31005?\u003c\/strong\u003e The 31005 includes a rubber football needle valve for air pressure adjustment, allowing it to be inflated or adjusted with a standard needle valve pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 31005 come in?\u003c\/strong\u003e This part number, 31005, is the white version of the Low Freeboard fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 31005 fender made in the USA?\u003c\/strong\u003e Yes, the 31005 Low Freeboard fender is manufactured in the USA by Taylor Made Products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the 31005 fender best suited for?\u003c\/strong\u003e The 31005 is designed for low freeboard boats, such as bass boats and other low-sitting fishing boats, where it protects the gunwales and rubrail better than a standard fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the warranty on the Taylor Made 31005?\u003c\/strong\u003e The 31005 Low Freeboard fender carries a 90 day manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when you order the 31005?\u003c\/strong\u003e Ordering the 31005 gets you one Taylor Made Low Freeboard Fender in white, measuring 5 x 14 inches.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989670310107,"sku":"NAT-31005","price":27.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41kc8jcAmZS.jpg?v=1784486844"},{"product_id":"taylor-made-products-hull-gard-inflatable-boat-fender-black-onyx-5-5-x-20-mpn-31722-fits-boats-15-to-20-ft","title":"Taylor Made Products Hull Gard Inflatable Vinyl Boat Fender, Black Onyx, 5.5 x 20 Inches","description":"\u003cp\u003eThe Taylor Made Products Hull Gard is an inflatable vinyl boat fender designed to cushion your hull against docks, pilings, and other boats. Built in an oval shape, it is recommended for boats 15 to 20 feet in length and provides a combination of softness and strength intended to absorb the constant pull of everyday fender use. The oval profile is designed to minimize rolling out of position, which helps keep the fender in place along the hull and reduces hull rub compared to a fender that spins or shifts.\u003c\/p\u003e\u003cp\u003eThe vinyl body is reinforced and molded-in to withstand repeated use, and the fender ships custom inflated to the right pressure for maximum effectiveness. Inflation and pressure adjustment are handled through a rubber football needle valve, which is standard across all Hull Gard sizes and allows boaters to fine-tune firmness for their application. This fender is finished in Black Onyx and measures 5.5 inches by 20 inches. It is made in the U.S.A. And is backed by a lifetime guarantee against splitting or bursting; if the fender fails, Taylor Made Products will replace it.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 31722\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Hull Gard Inflatable Vinyl Boat Fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black Onyx\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5.5 inches x 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 20 x 6 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Size:\u003c\/strong\u003e 15 to 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Oval\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Rubber football needle valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1 fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime guarantee against splitting or bursting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Taylor Made Products Hull Gard fender 31722 recommended for?\u003c\/strong\u003e This 5.5 x 20 inch Hull Gard fender is recommended for boats 15 to 20 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the Hull Gard fender come in?\u003c\/strong\u003e Part number 31722 is finished in Black Onyx.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Hull Gard fender made from?\u003c\/strong\u003e The Hull Gard fender is made from vinyl, reinforced and molded-in to withstand the constant pull of everyday use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the Hull Gard fender oval-shaped instead of round?\u003c\/strong\u003e The oval design is intended to prevent the fender from rolling out of position, which minimizes roll and reduces hull rub compared to a round fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you inflate the Hull Gard fender?\u003c\/strong\u003e Taylor Made Products 31722 uses a rubber football needle valve for inflation, allowing the firmness to be adjusted to suit different applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Hull Gard fender ship inflated or deflated?\u003c\/strong\u003e It ships custom inflated to the correct pressure for maximum effectiveness, so it is ready to use out of the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Hull Gard fender 31722?\u003c\/strong\u003e The fender measures 5.5 inches by 20 inches, with overall item dimensions of 20 x 6 x 6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Hull Gard fender weigh?\u003c\/strong\u003e The Taylor Made Products Hull Gard fender weighs 1.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Hull Gard fender covered by a warranty?\u003c\/strong\u003e Yes, the Hull Gard fender carries a lifetime guarantee against splitting or bursting; if it fails, Taylor Made Products will replace it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Hull Gard fender manufactured?\u003c\/strong\u003e Part number 31722 is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fenders come in the package?\u003c\/strong\u003e The listing for Taylor Made Products 31722 includes one Hull Gard fender.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989670473947,"sku":"NAT-31722","price":19.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61u8Y98pJjS.jpg?v=1784486858"},{"product_id":"taylor-made-pontoon-corner-gard-boat-fender-31038-flexible-pvc-corner-guard-3w-x-12l-fits-radius-90-degree-aluminum-pontoon-corners-includes-stainless-fasteners","title":"Taylor Made Products Pontoon Corner-Gard Fender 31038, Silver, 3 Inch W x 12 Inch L, PVC Corner Bumper","description":"\u003cp\u003eThe Taylor Made Products Corner-Gard, part number 31038, is a PVC corner fender built to protect the aluminum corners of a pontoon boat from dock and rub-rail impacts. It mounts directly over the factory aluminum corner of the pontoon deck and secures in place with the included stainless steel fasteners, giving that vulnerable corner a cushioned buffer against dings and scrapes that commonly occur when docking or when rafting a pontoon boat alongside a conventional hull boat.\u003c\/p\u003e\u003cp\u003eMeasuring 3 inches wide by 12 inches long, the Corner-Gard is sized to run along the corner profile of the pontoon deck for focused protection right where impacts happen most. It is finished in silver, a color chosen to blend in with aluminum decking so the fender protects without standing out. Construction is flexible PVC, which absorbs and cushions impact rather than transferring it into the aluminum fencing, helping prevent the dents and dings that reduce a pontoon boat's resale value over time. Installation is straightforward: position the Corner-Gard over the aluminum corner and fasten it down with the included stainless hardware, no drilling or fabrication required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 31038\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Pontoon Corner-Gard Fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyvinyl Chloride (PVC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Stainless steel fasteners included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit for pontoon boat corners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e TM31038\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011802811\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for pontoon boats, designed to mount over the factory aluminum corner of the pontoon deck.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eOEM equivalent part number TM31038.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Taylor Made 31038 Corner-Gard protect?\u003c\/strong\u003e It protects the corner of a pontoon boat's aluminum deck fencing from dock impacts and dings, which is especially useful when rafting a pontoon boat against a conventional hull boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Corner-Gard fender?\u003c\/strong\u003e The 31038 Corner-Gard measures 3 inches wide by 12 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 31038 Corner-Gard attach to the boat?\u003c\/strong\u003e It mounts over the factory aluminum corner of the pontoon deck and secures in place using the included stainless steel fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 31038 fender made from?\u003c\/strong\u003e It is made from flexible PVC (polyvinyl chloride), which cushions impacts rather than transferring them to the aluminum fencing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 31038?\u003c\/strong\u003e Part number 31038 is finished in silver, a shade selected to blend in with aluminum pontoon decking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with the 31038 Corner-Gard?\u003c\/strong\u003e Yes, stainless steel fasteners are included so no separate hardware purchase is needed to install the 31038 Corner-Gard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 31038 Corner-Gard a universal fit?\u003c\/strong\u003e Yes, the Taylor Made 31038 Corner-Gard is designed as a universal fit for pontoon boat aluminum corners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Taylor Made offer the Corner-Gard in other colors?\u003c\/strong\u003e Yes, the Corner-Gard line is also available as part number 31030 in white, 31035 in Silver Mist, and 31037 in Aurora Gold; part number 31038 is the silver version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent number for the 31038 Corner-Gard?\u003c\/strong\u003e Yes, the OEM equivalent part number for the Taylor Made 31038 Corner-Gard is TM31038.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 31038 Corner-Gard weigh?\u003c\/strong\u003e The Taylor Made 31038 Corner-Gard weighs 2.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 31038 Corner-Gard prevent dock rash on pontoon corners?\u003c\/strong\u003e Yes, its PVC construction provides a cushioned buffer over the aluminum corner, which helps prevent the dings and dock rash that occur during docking or rafting.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989670572251,"sku":"NAT-31038","price":31.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/NAT-31038__51394.1722364802.500.750.jpg?v=1785188910"},{"product_id":"taylor-made-products-31032-pontoon-fence-saver-fender-white-9w-x-36l","title":"Taylor Made 31032 Pontoon Fence Saver Fender, White, 9 Inch x 36 Inch, ABS Plastic","description":"\u003cp\u003eThe Taylor Made 31032 Pontoon Fence Saver Fender is a specialty fender built to protect a pontoon boat's fencing and railing from impacts and scratches while docked or underway. It is built from solid, durable ABS plastic that resists chemicals and physical impacts, so it holds up to repeated contact with docks, pilings, and other boats without cracking or degrading. Measuring 9 inches wide by 36 inches long, it provides generous coverage along the rail line, shielding a wide span of fencing in a single unit rather than relying on multiple small bumpers.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward thanks to an adjustable strap with a buckle attachment, allowing the fender to be fitted snugly to a boat's fence or railing and preventing slippage during docking and mooring. The white finish matches common pontoon trim and fencing colors while also improving visibility on the water. At 3 pounds, it is light enough to mount and reposition without added strain on the railing, making it a practical, low-maintenance way to keep a pontoon's fencing looking new.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 31032\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Specialty Fenders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e ABS plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid, resistant to chemicals and physical impacts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 9 inches W x 36 inches L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment:\u003c\/strong\u003e Adjustable strap with buckle attachment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011330321\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made 31032 Pontoon Fence Saver Fender made of?\u003c\/strong\u003e It is made of solid ABS plastic that is resistant to both chemicals and physical impacts, giving the 31032 fence saver durability against repeated contact with docks and railings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the 31032 fence saver fender?\u003c\/strong\u003e It measures 9 inches wide by 36 inches long, providing extended coverage along a pontoon boat's fencing or railing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the Taylor Made 31032 come in?\u003c\/strong\u003e This fence saver fender is finished in white, which matches common pontoon fencing and trim colors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 31032 fence saver weigh?\u003c\/strong\u003e The Taylor Made 31032 weighs 3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this fender attach to a pontoon boat?\u003c\/strong\u003e An adjustable strap with a buckle attachment secures the 31032 fence saver to the boat's fence or railing, allowing for quick, tool-free installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the strap be adjusted to fit different rail sizes?\u003c\/strong\u003e Yes, the Taylor Made 31032 uses an adjustable strap so it can be fitted snugly to varying fence or railing dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of boat is this fence saver designed for?\u003c\/strong\u003e The 31032 is a pontoon fence saver, designed specifically to protect a pontoon boat's fencing and railing rather than a traditional hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 31032 protect against scratches and impacts?\u003c\/strong\u003e Yes, its solid ABS plastic construction is built to resist physical impacts, helping prevent scratches and damage to the boat's fencing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 31032 resistant to chemicals?\u003c\/strong\u003e Yes, the ABS plastic used in the 31032 fence saver is resistant to chemicals as well as physical impacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made 31032 fence saver?\u003c\/strong\u003e The UPC for the Taylor Made 31032 Pontoon Fence Saver Fender is 040011330321.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989670605019,"sku":"NAT-31032","price":159.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__65644.1756308580.500.750.jpg?v=1785188146"},{"product_id":"taylor-made-products-31723-hull-gard-inflatable-boat-fender-black-onyx-6-5-x-23-for-boats-20-to-25-ft","title":"Taylor Made Products Hull Gard Inflatable Vinyl Boat Fender, Black Onyx, 6.5 x 23 Inches, for Boats 20 to 25 Feet","description":"\u003cp\u003eThe Taylor Made Products Hull Gard fender is an inflatable vinyl utility fender designed to protect boat hulls from dock rub and impact during mooring, docking, and rafting. Built in a distinctive oval profile, the shape helps keep the fender in place along the hull rather than rolling out of position, reducing hull rub compared to round fenders. This 6.5 inch x 23 inch size is recommended for boats in the 20 to 25 foot range.\u003c\/p\u003e\u003cp\u003eThe fender is constructed of vinyl that combines softness with strength to absorb repeated contact without splitting or bursting. A rubber football-style needle valve allows the fender to be inflated or adjusted to the firmness needed for the application, and it ships already inflated to the correct pressure for maximum effectiveness. The fender features reinforced molded-in construction built to withstand the constant pull of everyday use. Finished in Black Onyx, it is made in the U.S.A.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 31723\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Hull Gard Inflatable Vinyl Boat Fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black Onyx\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Size:\u003c\/strong\u003e 6.5 inches x 23 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Size:\u003c\/strong\u003e 20 to 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Oval\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Rubber football needle valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Taylor Made Products Hull Gard fender, part number 31723, designed for?\u003c\/strong\u003e The 31723 Hull Gard fender is recommended for boats in the 20 to 25 foot range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this fender?\u003c\/strong\u003e The Hull Gard fender, part number 31723, measures 6.5 inches by 23 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does part number 31723 come in?\u003c\/strong\u003e This Hull Gard fender is finished in Black Onyx.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Hull Gard fender made from?\u003c\/strong\u003e It is made of vinyl, chosen for a combination of softness and strength that resists splitting or bursting under repeated use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the fender oval shaped instead of round?\u003c\/strong\u003e The oval design of the Hull Gard fender, part 31723, helps prevent the fender from rolling out of position, which reduces hull rub compared to a round fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Hull Gard fender ship inflated?\u003c\/strong\u003e Yes, the 31723 Hull Gard fender ships custom inflated to the correct pressure for maximum effectiveness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you adjust the firmness of the fender?\u003c\/strong\u003e The fender uses a rubber football-style needle valve that allows the firmness to be adjusted for the application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fender weigh?\u003c\/strong\u003e The Taylor Made Products Hull Gard fender, part number 31723, weighs 2.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Hull Gard fender manufactured?\u003c\/strong\u003e The 31723 Hull Gard fender is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Hull Gard fender durable for everyday docking use?\u003c\/strong\u003e Yes, it features reinforced molded-in construction built to withstand the constant pull of everyday use.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989670670555,"sku":"NAT-31723","price":38.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61u8Y98pJjS_dbf4e70a-3395-453c-a02a-e7fe1cabc4f1.jpg?v=1784486868"},{"product_id":"taylor-made-products-347-dock-bumper-small-straight-36-l-x-8-t-x-6-d-white-vinyl-dock-edge-protector","title":"Taylor Made Products 36 Inch Marine Bumper, White Dock Fender, Small Straight (Model 347)","description":"\u003cp\u003eThe Taylor Made Products Marine Bumper (Model 347) is a small straight dock bumper measuring 36 inches long, 8 inches tall, and 6 inches in diameter, built to cushion your boat's hull from docks, pilings, and other vessels during docking or rafting. Inside, a core of high-density closed cell polyethylene foam provides firm, resilient impact absorption that will not lose shape or waterlog over time. The core is wrapped in a tough vinyl\/polyester tri-laminate covering engineered to resist UV fading, tearing, and general wear from sun and water exposure, so the bumper holds its finish and performance season after season. Corrosion-proof grommets are set into the ends of the bumper, allowing quick, secure attachment with line or hardware to a dock, piling, rail, or gunwale without the grommets rusting or seizing. Finished in white, it is sized as a compact straight bumper suited to smaller boats, personal watercraft, and tight docking or rafting situations where a full-length fender is not needed. Its straight profile lets it sit flush along a hull or dock edge for consistent, even protection at the point of contact. This is a universal-fit dock accessory, not tied to a specific boat make or model, and installs anywhere a dock line or mounting point can be run through the end grommets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 347\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Marine Bumper \/ Dock Fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Small Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density closed cell polyethylene foam with vinyl\/polyester tri-laminate cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.55 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011675033\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment:\u003c\/strong\u003e Corrosion-proof grommets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Protection:\u003c\/strong\u003e UV resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made Products bumper model 347?\u003c\/strong\u003e Model 347 measures 36 inches long, 8 inches tall, and 6 inches in diameter, classified as a small straight dock bumper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this bumper come in?\u003c\/strong\u003e Model 347 is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bumper filled with?\u003c\/strong\u003e It uses a core of high-density closed cell polyethylene foam, which keeps its shape and cushioning ability even after repeated impacts and water exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outer covering made of?\u003c\/strong\u003e A vinyl\/polyester tri-laminate blend covers the foam core, chosen for UV resistance and tear resistance so the bumper does not crack or fade with sun exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the bumper attach to my dock or boat?\u003c\/strong\u003e Corrosion-proof grommets are set into the ends of the Taylor Made Products 347 bumper, allowing it to be tied off or hardware-mounted without the grommets rusting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this bumper fit my specific boat model?\u003c\/strong\u003e The 347 is a universal-fit dock bumper, not restricted to a particular boat make or model, so it works on any boat or dock where a 36 inch straight bumper is appropriate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bumper suitable for personal watercraft?\u003c\/strong\u003e Yes, its compact straight profile makes the 347 suitable for smaller boats and personal watercraft in addition to standard docking and rafting use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the bumper weigh?\u003c\/strong\u003e The Taylor Made Products model 347 weighs 2.55 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is model 347 different from the larger 348 bumper?\u003c\/strong\u003e Model 347 is the small straight bumper at 36 inches long, while the 348 is a larger straight bumper at 60 inches long; both share the same 8 inch by 6 inch profile.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the bumper resistant to sun and water damage?\u003c\/strong\u003e Yes, the vinyl\/polyester tri-laminate cover on the 347 is UV resistant and water resistant, so it holds up under continuous outdoor exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this bumper?\u003c\/strong\u003e You receive one Taylor Made Products marine bumper, model 347, with corrosion-proof grommets already installed for attachment.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989670768859,"sku":"NAT-347","price":57.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31pXYBABWTL.jpg?v=1784486876"},{"product_id":"taylor-made-products-31030-pontoon-rail-fender-adjuster-white-3-in-w-x-12-in-l-aluminum-matched-rail-guard-with-stainless-fasteners","title":"Taylor Made Products Pontoon Boat Fender, White, 3 x 12 Inch","description":"\u003cp\u003eThe Taylor Made Products Pontoon Boat Fender protects your pontoon tubes from dock rash, rail contact, and rafting dings. Built from marine-grade vinyl, it mounts along the pontoon rail or deck edge and is secured with the included stainless steel fasteners for a solid, rattle-free fit. An integrated rubber football-style valve makes inflation quick and simple, and the fender's molded ridge hooks help it stay seated underneath the pontoon deck once installed, so it will not slide or shift during docking or when rafting alongside another hull.\u003c\/p\u003e\u003cp\u003eThis fender is finished in White and measures 3 inches wide by 12 inches long, sized to fit along the pontoon rail without overwhelming the tube profile. It uses a universal fit design intended to accommodate most styles of pontoon boats, and optional securing points let you adapt the mounting to your specific rail setup. The White finish is one of several color options Taylor Made Products offers in this fender line, each sold under its own part number, so boat owners can match their existing trim or hardware finish.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 31030\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Pontoon boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Stainless steel fasteners included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation Valve:\u003c\/strong\u003e Integrated rubber football-style valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011310309\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 31030?\u003c\/strong\u003e Part number 31030 is the White version of the Taylor Made Products pontoon boat fender; the same fender is also offered in Silver Mist and Aurora Gold under separate part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this pontoon fender?\u003c\/strong\u003e The Taylor Made Products pontoon fender (31030) measures 3 inches wide by 12 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the fender attach to the pontoon boat?\u003c\/strong\u003e It secures using the included stainless steel fasteners, with optional securing points to accommodate most styles of pontoon boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the fender made from?\u003c\/strong\u003e This Taylor Made pontoon fender is made from marine-grade vinyl.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the fender weigh?\u003c\/strong\u003e The Taylor Made Products pontoon fender, part 31030, weighs 4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you inflate the fender?\u003c\/strong\u003e Inflation is done through an integrated rubber football-style valve built into the fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fender fit any pontoon boat?\u003c\/strong\u003e Yes, the 31030 pontoon fender uses a universal fit design intended to work with most styles of pontoon boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps the fender from sliding out of position?\u003c\/strong\u003e Molded ridge hooks underneath the pontoon deck help hold the Taylor Made fender in place once it is mounted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fender genuine Taylor Made Products, not an off-brand copy?\u003c\/strong\u003e Yes, this is a genuine Taylor Made Products fender, part number 31030.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the fender?\u003c\/strong\u003e The package includes one pontoon fender along with the stainless steel fasteners needed for mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fender good for rafting boats together?\u003c\/strong\u003e Yes, the vinyl construction of the 31030 fender is designed to cushion contact when rafting a pontoon boat alongside another hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre other colors available in this same fender?\u003c\/strong\u003e Yes, besides the White finish of part 31030, Taylor Made Products offers this fender in Silver Mist (31035) and Aurora Gold (31037) as separate part numbers.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989670801627,"sku":"NAT-31030","price":49.06,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/1__06743.1756309234.500.750.jpg?v=1785189064"},{"product_id":"taylor-made-41034-big-b-inflatable-boat-fender-12-x-34-mid-atlantic-blue-fits-boats-50-to-60-5-8-rope-passage","title":"Taylor Made Big B Inflatable Boat Fender 41034, 12 x 34 Inch, Blue, for Boats 50 to 60 Feet","description":"\u003cp\u003eThe Taylor Made Big B Inflatable Boat Fender, part number 41034, is a cylindrical fender built to protect boats in the 50 foot to 60 foot range during docking, mooring, and tidal change conditions. Measuring 12 inches by 34 inches, this fender uses an end-to-end line passage so it can be hung either horizontally or vertically, and it accommodates 5\/8 inch rope for secure, versatile placement along the hull.\u003c\/p\u003e\u003cp\u003eConstructed from marine-grade vinyl in a seamless one-piece design, the Big B fender is built to withstand sustained exposure to sun, salt, and abrasion. Ribbed sidewalls help minimize roll against pilings and dock edges, keeping the fender in position and reducing hull contact in choppy water. A molded air inflation needle valve is built into the fender body, eliminating the need for a separate plug, and the fender arrives ready to inflate to the recommended 2 PSI. The Blue finish uses a color process intended to resist fading over repeated use.\u003c\/p\u003e\u003cp\u003eThis fender is designed for boats in the 50 foot to 60 foot class and is intended to supplement, not replace, a full docking and fendering plan sized to local conditions and marina requirements.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 41034\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Cylindrical Fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 12 inches x 34 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 50 feet to 60 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl (PVC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Inflation:\u003c\/strong\u003e 2 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Compatibility:\u003c\/strong\u003e 5\/8 inch rope\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e End-to-end line passage, hangs horizontally or vertically\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.97 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011314345\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Taylor Made 41034 fender designed for?\u003c\/strong\u003e The Taylor Made Big B fender, part number 41034, is sized for boats in the 50 foot to 60 foot range, and it is recommended to consult your marina and docking neighbors to confirm adequate protection for prevailing conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this fender?\u003c\/strong\u003e This fender measures 12 inches by 34 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 41034?\u003c\/strong\u003e Part number 41034 is Blue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rope size works with this fender?\u003c\/strong\u003e 5\/8 inch rope fits the end-to-end line passage on the Taylor Made 41034 fender, which can be hung either horizontally or vertically.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Big B fender made from?\u003c\/strong\u003e Marine-grade vinyl (PVC) in a seamless one-piece construction is used, which is built to resist wear from sun, salt, and abrasion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should this fender be inflated?\u003c\/strong\u003e 2 PSI is the recommended inflation level for the Taylor Made 41034 fender, and it includes a molded air inflation needle valve so no separate plug is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fender come pre-inflated?\u003c\/strong\u003e Yes, the Taylor Made Big B fender arrives inflated to the recommended 2 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender be hung vertically instead of horizontally?\u003c\/strong\u003e Yes, the end-to-end line passage on part number 41034 allows it to be hung either horizontally or vertically depending on docking needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fender weigh?\u003c\/strong\u003e 10.97 pounds is the weight of the Taylor Made 41034 fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fender help reduce roll against the dock or pilings?\u003c\/strong\u003e Ribbed sidewalls on the Big B fender are designed to minimize roll and improve stability against pilings and dock edges, even in choppy water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the color on this fender fade resistant?\u003c\/strong\u003e The Blue finish on part number 41034 uses a color process intended to hold up over repeated use rather than fading quickly.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989672538331,"sku":"NAT-41034","price":266.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61cSEPSWA1S_07c0cc70-f5bd-4957-83a5-29e7333ffe0a.jpg?v=1784486985"},{"product_id":"taylor-made-46090-raft-fender-cushion-15-x-15-white-marine-grade-vinyl-rafting-and-piling-bumper","title":"Taylor Made 46090 Raft Cushion Fender, White, 15 Inch x 15 Inch","description":"\u003cp\u003eThe Taylor Made 46090 Raft Cushion is a rectangular fender built specifically for rafting boats together or tying up against solid walls and pilings, situations where a conventional round fender cannot provide enough surface protection. The cushion measures 15 inches long by 15 inches wide with a 6-1\/2 inch diameter and is molded with six individual tubes connected by a channel design. This construction lets the cushion flex and hug the hull or dock surface rather than rolling or riding up out of position, so it stays in place under the pressure of two boats pressing against each other. The cushion is made from tough marine grade vinyl that is more abrasion resistant and twice as tear resistant than competing fenders, and it includes an inflation valve so boaters can adjust air pressure for the right amount of cushioning. It can be hung horizontally or vertically, used as a piling cushion by tying through the two rows of center holes, or repurposed as a comfortable seat cushion on deck. The Taylor Made 46090 is finished in white and is backed by a five-year limited warranty. It is manufactured in the USA and is not rated as a life-saving device.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 46090\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Raft cushion fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 15 inches L x 15 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 6-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Six molded tubes with channel design for crush resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation:\u003c\/strong\u003e Inflation valve for adjustable air pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Five-year limited warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011460905\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made 46090 raft cushion?\u003c\/strong\u003e The 46090 measures 15 inches long by 15 inches wide with a 6-1\/2 inch diameter, making it the smallest of Taylor Made's rectangular raft cushion sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 46090 raft cushion come in?\u003c\/strong\u003e This raft cushion is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a raft cushion used for?\u003c\/strong\u003e A raft cushion is a rectangular fender designed for maximum protection when boats are rafted together or tied against a solid wall or piling, offering more surface contact and crush resistance than a conventional round fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 46090 be hung vertically or horizontally?\u003c\/strong\u003e Yes, the Taylor Made 46090 can be hung either vertically or horizontally depending on how it needs to sit against the hull or dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Taylor Made 46090 made from?\u003c\/strong\u003e It is constructed from tough marine grade vinyl that is more abrasion resistant and twice as tear resistant than competing fender cushions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the raft cushion have an inflation valve?\u003c\/strong\u003e Yes, the 46090 includes an inflation valve so the air pressure inside the cushion can be adjusted for the desired amount of cushioning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 46090 be used as a piling cushion?\u003c\/strong\u003e Yes, the cushion has two rows of center holes that allow it to be tied off and used as a piling cushion in addition to its use as a rafting fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 46090 rated as a life-saving device?\u003c\/strong\u003e No, this raft cushion must never be used as a life-saving device; it is designed solely as a fender and cushion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 46090 raft cushion weigh?\u003c\/strong\u003e The Taylor Made 46090 weighs 6.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the channel design matter on this fender?\u003c\/strong\u003e The six molded tubes and channel design on the 46090 let it hug the contour of the boat, which keeps it from riding up or rolling out of position under pressure, unlike conventional fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 46090 made in the USA?\u003c\/strong\u003e Yes, the 46090 raft cushion is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the 46090?\u003c\/strong\u003e The Taylor Made 46090 is backed by a five-year limited warranty.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989672898779,"sku":"NAT-46090","price":121.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/518erej2DlL.jpg?v=1784487005"},{"product_id":"taylor-made-products-46095-fender-cushion-20-x-20-x-7-5-8-flat-rafting-cushion-for-boats","title":"Taylor Made Products 46095 Flat Rafting Cushion Boat Fender, 20 x 20 x 7-5\/8 Inch, White","description":"\u003cp\u003eThe Taylor Made Products 46095 is a flat rafting cushion built specifically for protecting boats that are tied against solid walls or rafted alongside other vessels, a situation where a conventional round fender cannot do the job. Unlike a standard fender, this rectangular cushion uses a channel design with six molded tubes that provide crush resistance while allowing the cushion to hug the hull instead of rolling or riding up out of position. That combination keeps the boat protected even when several vessels are rafted together and jarring against one another. The 46095 measures 20 inches long by 20 inches wide with a 7-5\/8 inch diameter and is finished in white. It is constructed from tough marine grade vinyl and includes an inflation valve so boaters can adjust air pressure to suit conditions. Two rows of center holes let it be hung either horizontally or vertically, used as a piling cushion, or pressed into service as a comfortable seat cushion on deck. This size is one of three flat rafting cushions Taylor Made Products offers, so boaters can match cushion size to boat size. The 46095 is made in the USA and is not rated as a personal flotation or life-saving device.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 46095\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 7-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation:\u003c\/strong\u003e Adjustable via inflation valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011460950\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made Products 46095 rafting cushion?\u003c\/strong\u003e The 46095 measures 20 inches long by 20 inches wide with a 7-5\/8 inch diameter, making it the mid-size option in Taylor Made's flat rafting cushion lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender be used as a life jacket or flotation device?\u003c\/strong\u003e No. The 46095 flat rafting cushion is designed purely for hull protection and must never be used as a life-saving or personal flotation device.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between a flat rafting cushion and a regular round fender?\u003c\/strong\u003e A round fender is designed to roll against a hull, while the 46095 uses a flat, rectangular design with six molded tubes that hug the boat instead of rolling or riding up, giving better protection when rafting multiple boats together or tying against a solid wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 46095 made from?\u003c\/strong\u003e It is constructed from tough marine grade vinyl designed to resist crushing and abrasion in rafting or dockside use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I adjust the firmness of the cushion?\u003c\/strong\u003e The 46095 includes an inflation valve so you can add or release air to adjust firmness and cushioning to your preference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cushion be hung vertically and horizontally?\u003c\/strong\u003e Yes, the Taylor Made 46095 can be hung either vertically or horizontally, and its two rows of center holes also allow it to be tied off as a piling cushion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 46095 available in other sizes?\u003c\/strong\u003e Yes, Taylor Made Products offers this flat rafting cushion design in multiple sizes; the 46095 is the 20 x 20 x 7-5\/8 inch version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 46095 come in?\u003c\/strong\u003e The Taylor Made 46095 rafting cushion is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender double as a seat cushion?\u003c\/strong\u003e Yes, boaters commonly use the 46095 as a comfortable seat cushion on deck in addition to its role as a rafting fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Taylor Made 46095 manufactured?\u003c\/strong\u003e The 46095 flat rafting cushion is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 46095 weigh?\u003c\/strong\u003e The Taylor Made Products 46095 rafting cushion weighs 12 pounds.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989672931547,"sku":"NAT-46095","price":228.81,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/518erej2DlL_6647becc-d0d8-42fd-9d02-298a50de0b88.jpg?v=1784487006"},{"product_id":"taylor-made-products-56090-transom-fender-10-x-22-white-sailboat-stern-swim-platform-boat-fender","title":"Taylor Made Products Rafting Fender 56090, 36 x 12 x 3 Inch Self-Centering Dock Fender","description":"\u003cp\u003eThe Taylor Made Products Rafting Fender (part number 56090) is a self-centering fender built for rafting boats together or protecting a hull against a dock or piling. Unlike a single round fender, its flat-sided profile grips the hull and stays put no matter which way it is hung, working equally well vertically or horizontally. This design lets one Rafting Fender do the protective job of roughly six individual round fenders, reducing the clutter of lines and fenders needed when boats are tied side by side or secured to a piling. When not in use, it folds away and stows easily, saving space in a locker or lazarette. The 56090 measures 36 inches by 12 inches by 3 inches and is available in Blue or Grey to match different boat color schemes. Built by Taylor Made Products for repeated use in marine environments, it is a practical, durable option for boaters who raft up frequently or need reliable piling protection at the dock.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 56090\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rafting Fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 36 inches x 12 inches x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors Available:\u003c\/strong\u003e Blue, Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Orientation:\u003c\/strong\u003e Vertical or horizontal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011560902\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Products Rafting Fender used for?\u003c\/strong\u003e The Rafting Fender (part number 56090) is designed for rafting boats together side by side or protecting a hull against a dock or piling, offering wider, flatter protection than a single round fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is part number 56090?\u003c\/strong\u003e Part number 56090 measures 36 inches by 12 inches by 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat colors does the 56090 Rafting Fender come in?\u003c\/strong\u003e It is available in Blue and Grey.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender be hung either vertically or horizontally?\u003c\/strong\u003e Yes. The Taylor Made Products Rafting Fender is self-centering, so it stays in place on a piling whether it is hung vertically or horizontally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes one Rafting Fender really replace multiple regular fenders?\u003c\/strong\u003e Taylor Made Products states the Rafting Fender attaches more easily and protects better than 6 individual fenders, making it a space-saving alternative for rafting or docking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 56090 Rafting Fender weigh?\u003c\/strong\u003e It weighs 10 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Rafting Fender made from?\u003c\/strong\u003e It is constructed from polypropylene.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 56090 fender a universal fit for any boat?\u003c\/strong\u003e Yes, the Rafting Fender has a universal fit type and is not restricted to a specific boat make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Rafting Fender be stored easily when not in use?\u003c\/strong\u003e Yes, it folds away and stows easily when not deployed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fenders come in one package of part number 56090?\u003c\/strong\u003e Each unit count is 1, so 56090 is sold as a single Rafting Fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made Products Rafting Fender 56090?\u003c\/strong\u003e The UPC for part number 56090 is 040011560902.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989673717979,"sku":"NAT-56090","price":133.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-2__32729.1763741545.500.750.jpg?v=1785187985"},{"product_id":"taylor-made-products-61149-tuff-end-18-inflatable-boat-fender-buoy-orange-seamless-marine-grade-vinyl-for-larger-boats","title":"Taylor Made Products Tuff End Round Fender\/Buoy, 18 Inch, Orange, Marine-Grade Vinyl","description":"\u003cp\u003eThe Taylor Made Products Tuff End Round Fender is an 18 inch inflatable buoy fender built from flexible, resilient marine-grade vinyl for heavy-duty use on larger boats. Its seamless one-piece construction is designed to hold up under repeated dock contact and mooring use without seams to fail. Both ends are injection molded and tested to 2000 psi tensile strength, with large line holes sized to accept most ropes and standard shackles, so it can be rigged as a fender or a mooring buoy. Inflation is handled through a Tri-valve, which accepts either a standard football needle or an air compressor, making it quick to inflate or deflate for storage. Finished in high-visibility orange, the Tuff End is made in the USA and sized at 18 inches with a 57 inch circumference and 1-1\/2 inch line holes. It is intended for heavier, larger vessels where a standard-duty round fender is not rugged enough.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 61149\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircumference:\u003c\/strong\u003e 57 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Hole Diameter:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuoyancy Capacity:\u003c\/strong\u003e 112 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Orange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-Grade Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.76 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Seamless one-piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Strength (injection molded ends):\u003c\/strong\u003e 2000 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation Valve:\u003c\/strong\u003e Tri-valve (football needle or compressor compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made 61149 fender?\u003c\/strong\u003e The Taylor Made Products 61149 Tuff End round fender measures 18 inches with a 57 inch circumference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you inflate the Tuff End fender?\u003c\/strong\u003e It inflates through a Tri-valve, which works with either a standard football needle or an air compressor, so no special tool is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 61149 fender made from?\u003c\/strong\u003e It is made from flexible, resilient marine-grade vinyl designed to withstand repeated dock and hull contact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 61149 be used as a mooring buoy instead of a fender?\u003c\/strong\u003e Yes, the large line holes on the Taylor Made 61149 are sized to accept most ropes and standard shackles, allowing it to be rigged as either a hanging fender or a mooring buoy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can the 61149 buoy support?\u003c\/strong\u003e The Taylor Made 61149 has a buoyancy capacity of 112 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 61149 come in?\u003c\/strong\u003e This fender is finished in high-visibility orange.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow strong are the end fittings on this fender?\u003c\/strong\u003e The injection molded ends are tested to 2000 psi tensile strength for durability under load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made Tuff End fender made in the USA?\u003c\/strong\u003e Yes, the Tuff End 61149 fender is made in the USA for heavy-duty marine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the diameter of the line holes on the 61149?\u003c\/strong\u003e The line holes measure 1-1\/2 inches, sized to fit most ropes and standard shackles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 61149 fender weigh?\u003c\/strong\u003e The Taylor Made 61149 weighs 6.76 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 61149 a one-piece or seamed construction?\u003c\/strong\u003e It features seamless one-piece construction, which Taylor Made positions as the strongest build in the category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the Tuff End 61149 fender intended for?\u003c\/strong\u003e It is built for larger boats and heavy-duty marine applications where a standard-duty fender is not rugged enough.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989674504411,"sku":"NAT-61149","price":79.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71-7aR4KzrL.jpg?v=1784487078"},{"product_id":"taylor-made-tuff-end-27-inflatable-mooring-buoy-dock-fender-orange-heavy-duty-marine-vinyl-for-80-100-ft-boats-mpn-61155","title":"Taylor Made Tuff End Buoy Fender 61155, 27 Inch, Orange","description":"\u003cp\u003eThe Taylor Made Tuff End Buoy Fender (part number 61155) is a 27 inch heavy-duty round fender built to meet the demands of commercial marine dockside use. It is constructed from flexible, resilient marine grade vinyl in a seamless one-piece construction, which Taylor Made states is the strongest fender construction in the industry, eliminating the seams that are typically the weak point on other fenders. Each end features injection molded ends tested to 2000 psi tensile strength, giving the fender added durability at the points that see the most wear from repeated contact with docks and hulls. The ends also include large line holes sized to accept most ropes and standard shackles, making it easy to rig for a variety of mooring and fender-line setups.\u003c\/p\u003e\u003cp\u003eInflation is handled through a tri-valve system, so the fender can be aired up quickly with a standard football needle or an air compressor. Taylor Made recommends an inflation pressure of 2 PSI for this fender line. It is finished in orange and is manufactured in the USA for heavy duty marine applications. This size is generally suited to larger commercial and recreational vessels; select the fender size based on a survey of comparable boats using the same dock area, matching fender dimensions and quantity to vessel size and weight.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 61155\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 27 Inch Tuff End Round Fender - Orange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Round Fenders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Orange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Seamless one-piece construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 27 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircumference:\u003c\/strong\u003e 85 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Hole \/ Valve Fitting Size:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Capacity:\u003c\/strong\u003e 180 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Inflation Pressure:\u003c\/strong\u003e 2 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation Valve Type:\u003c\/strong\u003e Tri-valve (football needle or compressor compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Tensile Strength:\u003c\/strong\u003e Injection molded ends tested to 2000 psi tensile strength\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 35.25 inches L x 26 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 17.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made Tuff End Buoy Fender 61155?\u003c\/strong\u003e The Taylor Made Tuff End Buoy Fender, part number 61155, measures 27 inches with an 85 inch circumference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat weight capacity does this fender support?\u003c\/strong\u003e The 61155 fender carries a weight capacity of 180 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 61155 fender come in?\u003c\/strong\u003e It comes in orange.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Tuff End Buoy Fender made from?\u003c\/strong\u003e It is made from flexible, resilient marine grade vinyl in a seamless one-piece construction, which Taylor Made positions as the strongest fender construction available.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I inflate the Taylor Made 61155 fender?\u003c\/strong\u003e It uses a tri-valve system that can be inflated with a standard football needle or an air compressor; Taylor Made recommends inflating to 2 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much air pressure should the fender be inflated to?\u003c\/strong\u003e Recommended inflation for the 61155 fender is 2 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill standard dock lines and shackles fit through the fender's line holes?\u003c\/strong\u003e Yes, the 61155 fender features large line holes sized to accept most ropes and standard shackles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow durable are the ends of this fender?\u003c\/strong\u003e The injection molded ends on the 61155 fender are tested to 2000 psi tensile strength for added durability where the fender takes the most wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made Tuff End Buoy Fender made in the USA?\u003c\/strong\u003e Yes, it is manufactured in the USA for heavy duty marine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the fender weigh for shipping purposes?\u003c\/strong\u003e The 61155 fender weighs 17.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I choose the right fender size for my boat?\u003c\/strong\u003e Taylor Made recommends surveying your dock area to see what fender size and quantity are used for boats of similar size and weight, and using that as a guideline when selecting a fender like the 61155.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fender have a seam that could fail over time?\u003c\/strong\u003e No, the 61155 fender uses a seamless one-piece construction rather than a seamed design, which Taylor Made states is the strongest construction in the industry.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989675127003,"sku":"NAT-61155","price":283.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71-7aR4KzrL_3d1429cc-bd9a-4f3d-9804-34874596f550.jpg?v=1784487114"},{"product_id":"taylor-made-71034-big-b-inflatable-boat-fender-12-x-34-black-marine-grade-vinyl-for-boats-50-to-60","title":"Taylor Made Products 71034 Big B Inflatable Vinyl Fender, 12 x 34 Inch, Black","description":"\u003cp\u003eThe Taylor Made Products 71034 Big B Inflatable Vinyl Fender is a 12 inch x 34 inch boat fender built to protect hulls from pilings, docks, and other boats during mooring and docking. It ships inflated and ready to hang, with an end-to-end rope passage that lets it hang either horizontally or vertically depending on your docking situation. Horizontal hanging is especially useful for protection against pilings and awkward docking spots, while vertical hanging suits standard side-tie mooring.\u003c\/p\u003e\u003cp\u003eThis fender is made from marine-grade vinyl with a high-gloss finish designed to hold up in sun and harsh marine conditions. The body uses seamless, one-piece construction with molded ribs that minimize roll and keep the fender positioned against the hull. Inflation is handled through a rubber football needle valve, which allows easy topping off and is built for long service life; the recommended inflation pressure is 2 PSI. The fender is finished in black.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 71034\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 12 in x 34 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Seamless, one-piece body with molded ribs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Rubber football needle valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Inflation:\u003c\/strong\u003e 2 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 50 feet to 60 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Quantity:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made 71034 fender?\u003c\/strong\u003e The 71034 measures 12 inches by 34 inches, part of the Taylor Made Big B fender line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fender come inflated?\u003c\/strong\u003e Yes, the Taylor Made 71034 ships inflated and ready to hang at the recommended pressure of 2 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat length is this fender recommended for?\u003c\/strong\u003e Taylor Made's size guidance for the 12 x 34 inch Big B fender covers boats from 50 feet to 60 feet, and the recommendation is a minimum starting point, so check with your marina or docking neighbors for prevailing conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fenders do I need for my boat?\u003c\/strong\u003e Two of the 71034 fenders are the recommended quantity for boats in the 50 foot to 60 foot range, though more may be needed depending on docking conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender hang horizontally as well as vertically?\u003c\/strong\u003e Yes, the 71034 has an end-to-end rope passage that allows it to hang either horizontally or vertically, with horizontal hanging useful for pilings and awkward docking situations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Taylor Made Big B fender made from?\u003c\/strong\u003e It is made from marine-grade vinyl with a high-gloss finish, formed as a seamless one-piece body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 71034?\u003c\/strong\u003e The 71034 is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I inflate or top off this fender?\u003c\/strong\u003e The 71034 uses a rubber football needle valve for inflation, which allows easy topping off and is designed for long service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the fender have molded ribs?\u003c\/strong\u003e The molded ribs on the Taylor Made 71034 body help minimize roll, keeping the fender in place against the hull while docked.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fender weigh?\u003c\/strong\u003e The Taylor Made Big B fender, part number 71034, weighs 13 pounds.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989675225307,"sku":"NAT-71034","price":241.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71M8m1YTg-S_92e93564-5b31-4720-81e5-17ccdf32e9a4.jpg?v=1784487116"},{"product_id":"taylor-made-big-b-inflatable-boat-fender-black-10-x-26-ribbed-vinyl-dock-fender-for-boats-20-to-35-mpn-71032","title":"Taylor Made Big B Inflatable Boat Fender, Black, 10 x 26 Inches","description":"\u003cp\u003eThe Taylor Made Big B Fender is a cylindrical inflatable boat fender built to protect your hull from pilings, docks, and other boats during mooring and docking. Sized at 10 inches by 26 inches, it is designed for boats 20 feet to 35 feet in length. The fender features an end-to-end line passage so it can be hung either horizontally or vertically, and it is compatible with 5\/8 inch ropes for secure, versatile placement. Ribbed technology along the body adds stability and helps minimize roll, keeping the fender in position and providing consistent protection even in choppy water.\u003c\/p\u003e\u003cp\u003eConstructed from marine-grade vinyl in a seamless one-piece design, the Big B Fender is built to withstand sun, salt, and everyday marine wear without splitting at a seam. It is finished in black using Taylor Made's True Color process, which is formulated to resist fading over time. The fender arrives inflated and ready to hang.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 71032\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 10 inches x 26 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Size:\u003c\/strong\u003e 20 feet to 35 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Compatibility:\u003c\/strong\u003e 5\/8 inch rope\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011317322\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made Big B Fender, part number 71032?\u003c\/strong\u003e It measures 10 inches by 26 inches, the dimensions for Taylor Made Big B Fender 71032.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is this fender designed for?\u003c\/strong\u003e Taylor Made Big B Fender 71032 is designed for boats 20 feet to 35 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rope size works with this fender?\u003c\/strong\u003e The end-to-end line passage on fender 71032 is compatible with 5\/8 inch rope.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender be hung horizontally or vertically?\u003c\/strong\u003e Yes, the end-to-end line passage design of the Big B Fender 71032 allows it to be hung either horizontally or vertically.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Big B Fender made from?\u003c\/strong\u003e Fender 71032 is made from marine-grade vinyl, formed as a seamless one-piece construction for durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ribbed surface actually help in choppy water?\u003c\/strong\u003e The ribbed technology on the Big B Fender 71032 is built to enhance stability and minimize roll, providing protection even in choppy water conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the color fade over time?\u003c\/strong\u003e Fender 71032 is finished in black using a True Color process intended to hold vibrant color and resist fading over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fender weigh?\u003c\/strong\u003e The Taylor Made Big B Fender 71032 weighs 7.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fender arrive inflated?\u003c\/strong\u003e Yes, the Big B Fender 71032 arrives inflated and ready to hang.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this fender?\u003c\/strong\u003e Purchasing part number 71032 includes one Big B inflatable fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fender genuine Taylor Made?\u003c\/strong\u003e Yes, part number 71032 is a genuine Taylor Made Big B Fender, not a generic aftermarket replica.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989675389147,"sku":"NAT-71032","price":107.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71M8m1YTg-S_7b91850f-9dd4-467c-90f7-91d88d68f84c.jpg?v=1784487125"},{"product_id":"attwood-93531-1-softside-corner-dock-fender-11-3-4-x-11-3-4-x-4-1-2-uv-resistant-white-corner-bumper-for-90-degree-docks","title":"Attwood 93531-1 SoftSide Corner Dock Fender, White, 11-3\/4 x 11-3\/4 x 4-1\/2 Inch","description":"\u003cp\u003eThe Attwood 93531-1 SoftSide Corner Dock Fender is a molded, soft, lightweight dock bumper designed to protect boats and watercraft where a dock or piling meets at a 90-degree angle. Made from a soft polymeric material, it is easy on gelcoat and hull surfaces while standing up to repeated contact against dock edges and corners. The fender is very tough and resists chalking, splitting, deflating, and crushing over time, and it is highly resistant to UV exposure and fading, making it suitable for long-term outdoor use at the dock.\u003c\/p\u003e\u003cp\u003eThis corner fender is molded to fit any 90-degree angle, making it a universal-fit accessory for dock corners rather than a boat-specific part. Installation is straightforward, with four 5\/16 inch holes molded into the fender for mounting hardware (hardware not included). Measuring 11-3\/4 inches long by 11-3\/4 inches wide by 4-1\/2 inches high, it is sized to cover a dock corner and cushion contact points effectively. It ships as a single SoftSide Corner Dock Fender unit and is backed by Attwood's lifetime warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 93531-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Corner Dock Fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polymeric material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit (any 90-degree angle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 11-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 11-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 4-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Holes:\u003c\/strong\u003e 4 holes, 5\/16 inch diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e SoftSide Corner Dock Fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 93531-1 used for?\u003c\/strong\u003e The Attwood 93531-1 is a SoftSide Corner Dock Fender that cushions boats and watercraft against dock corners and pilings, protecting the hull from scuffs and impacts where a dock meets at a 90-degree angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this dock fender?\u003c\/strong\u003e The 93531-1 measures 11-3\/4 inches long by 11-3\/4 inches wide by 4-1\/2 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle corners does this fender fit?\u003c\/strong\u003e This fender is molded to fit any 90-degree angle, so it works as a universal-fit corner dock fender rather than being sized to a specific boat or dock model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 93531-1 come in?\u003c\/strong\u003e It is white, matching typical dock and fender color schemes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 93531-1 made from?\u003c\/strong\u003e It is molded from a soft, lightweight polymeric material that is gentle on boat surfaces while resisting chalking, splitting, deflating, and crushing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this dock fender resistant to sun and weather exposure?\u003c\/strong\u003e Yes, the 93531-1 is highly resistant to UV exposure and fading, making it suitable for continuous outdoor use at the dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 93531-1 mounted to a dock?\u003c\/strong\u003e It installs using four 5\/16 inch mounting holes molded into the fender; mounting hardware is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 93531-1 weigh?\u003c\/strong\u003e The SoftSide Corner Dock Fender weighs 1.45 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 93531-1?\u003c\/strong\u003e Each order includes one Attwood 93531-1 SoftSide Corner Dock Fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 93531-1 come with a warranty?\u003c\/strong\u003e Yes, it is backed by Attwood's lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fender crack or deflate over time?\u003c\/strong\u003e No, the 93531-1 is built to be very tough and resistant to chalking, splitting, deflating, or crushing under normal use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 93531-1 a straight-edge or corner fender?\u003c\/strong\u003e The 93531-1 is a corner dock fender, distinct from Attwood's straight-edge dock fender options.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989676634331,"sku":"ATT-93531-1","price":15.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__11778.1754576481.500.750.jpg?v=1785188991"},{"product_id":"attwood-93532-1-softside-straight-edge-dock-fender-18-in-white-uv-resistant-molded-boat-bumper","title":"Attwood Straight-Edge Dock Fender 93532-1, Softside White, 18 x 3-1\/2 x 4-1\/2 Inch","description":"\u003cp\u003eThe attwood Straight-Edge Dock Fender (part number 93532-1) is a softside dock bumper built to cushion the side of a boat against a straight-edge dock, seawall, or piling run. It measures 18 inches long by 3-1\/2 inches wide by 4-1\/2 inches high and is molded from a soft, lightweight material that is easy on the boat's hull and gelcoat while still standing up to repeated contact. The material is highly resistant to UV exposure and fading, so it holds its white finish and flexibility through long-term outdoor and dockside exposure, and it is tough enough to resist chalking, splitting, deflating, or crushing over time.\u003c\/p\u003e\u003cp\u003eMounting is straightforward: the fender is installed using three 5\/16 inch mounting holes molded into the body, letting it be fastened directly to a dock face, swim platform edge, or hull rub rail without special hardware. It is finished in white to blend with common hull and dock colors. This dock fender is made in the U.S.A. And backed by a 2 year manufacturer warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 93532-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Straight-Edge Dock Fender (Softside)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 3-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 4-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3667 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e (3) 5\/16 inch mounting holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Year Manufacturer Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697935328\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Dock Bumpers and Wheels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the attwood 93532-1 dock fender?\u003c\/strong\u003e The attwood 93532-1 Straight-Edge Dock Fender measures 18 inches long, 3-1\/2 inches wide, and 4-1\/2 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this dock fender come in?\u003c\/strong\u003e The 93532-1 dock fender is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the fender weigh?\u003c\/strong\u003e It weighs 1.3667 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the attwood 93532-1 mounted to a dock or hull?\u003c\/strong\u003e Mounting uses three 5\/16 inch holes molded into the fender body, so it can be bolted directly to a dock face or hull without additional hardware modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this dock fender made from?\u003c\/strong\u003e It is molded from a soft, lightweight material designed to be easy on a boat's hull while resisting chalking, splitting, deflating, or crushing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the attwood 93532-1 resistant to sun and weather exposure?\u003c\/strong\u003e Yes, the fender's material is highly resistant to UV exposure and fading, making it suitable for continuous outdoor dockside use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the attwood 93532-1 fender made in the United States?\u003c\/strong\u003e Yes, the Straight-Edge Dock Fender is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the attwood 93532-1 come with a warranty?\u003c\/strong\u003e The attwood 93532-1 dock fender carries a 2 year manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fender designed for straight dock edges or corners?\u003c\/strong\u003e The 93532-1 is the Straight-Edge version, intended for straight dock runs and seawalls rather than corner applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the attwood 93532-1?\u003c\/strong\u003e The order includes one attwood Softside Straight-Edge Dock Fender; mounting bolts for the 5\/16 inch holes are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the attwood 93532-1 dock fender?\u003c\/strong\u003e The UPC for this attwood Straight-Edge Dock Fender is 022697935328.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989676765403,"sku":"ATT-93532-1","price":13.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__21090.1754575280.500.750.jpg?v=1785188903"},{"product_id":"attwood-93534-1-softside-15-inch-round-corner-dock-fender-white-fits-any-90-degree-dock-corner","title":"Attwood 93534-1 Round Corner Dock Fender, 15 Inch, White","description":"\u003cp\u003eThe Attwood 93534-1 is a softside round corner dock fender built to protect your boat's hull and brightwork whenever it is docked or tied alongside another vessel. Molded from a soft, lightweight rubber material, it cushions contact with dock edges and pilings without marking or scuffing gelcoat finishes. The fender is engineered to resist chalking, splitting, deflating, and crushing over repeated use, and its UV-resistant construction is built to stand up to prolonged sun exposure and fading. Its round corner profile is designed to fit any 90-degree angle, making it a practical choice for protecting the corners of docks, swim platforms, and boat hulls. Installation is straightforward with (6) 5\/16 inch mounting holes for a secure bolt-on fit. Finished in white, the 93534-1 is backed by Attwood's lifetime manufacturer warranty. This fender is a universal-fit accessory, so it is not tied to a specific boat make, model, or engine.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 93534-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Round Corner Dock Fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 15 Inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit (fits any 90-degree angle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Bolt-On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Holes:\u003c\/strong\u003e (6) 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Thickness:\u003c\/strong\u003e 7 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697935342\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Warranty:\u003c\/strong\u003e Lifetime\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for any 90-degree corner on docks, swim platforms, or boat hulls; not specific to a particular boat make or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers apply to this product.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Attwood 93534-1 dock fender?\u003c\/strong\u003e The 93534-1 is a 15 inch round corner dock fender, sized to protect the corner areas of a dock or hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fender fit any dock or boat corner?\u003c\/strong\u003e Yes, the Attwood 93534-1 is designed to fit any 90-degree angle, making it a universal-fit accessory rather than a model-specific part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 93534-1 dock fender made from?\u003c\/strong\u003e It is made from rubber, molded into a soft, lightweight form that cushions contact without marking hull surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you install the Attwood 93534-1?\u003c\/strong\u003e Installation is bolt-on, using the (6) 5\/16 inch mounting holes molded into the 93534-1 fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this dock fender available in?\u003c\/strong\u003e The Attwood 93534-1 is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 93534-1 fender resistant to sun and weather damage?\u003c\/strong\u003e Yes, the 93534-1 is UV-resistant and built to resist fading from prolonged sun exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the fender crack, split, or crush over time?\u003c\/strong\u003e The Attwood 93534-1 is built to resist chalking, splitting, deflating, and crushing during normal use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when you order this product?\u003c\/strong\u003e One Attwood 93534-1 SoftSide round corner dock fender is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 93534-1 dock fender weigh?\u003c\/strong\u003e It weighs 2.625 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Attwood 93534-1?\u003c\/strong\u003e Attwood backs the 93534-1 dock fender with a lifetime manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 93534-1 a genuine Attwood part?\u003c\/strong\u003e Yes, part number 93534-1 is a genuine Attwood product, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the round corner fender different from Attwood's straight-edge dock fender?\u003c\/strong\u003e The 93534-1 round corner fender is shaped for 90-degree corners, while Attwood's straight-edge dock fender (93532) is built for flat dock edges rather than corners.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989676830939,"sku":"ATT-93534-1","price":22.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__88066.1754574900.500.750.jpg?v=1785188460"},{"product_id":"attwood-93533-1-softside-slide-on-post-dock-fender-white-7-in-x-15-in-fits-posts-up-to-2-3-8-in-o-d","title":"Attwood 93533-1 Slide-On Post Dock Fender, White, Fits Posts up to 2 3\/8 Inches","description":"\u003cp\u003eThe Attwood 93533-1 is a slide-on post dock fender designed to protect boat hulls from posts and pilings when docking. It slides directly over a dock post up to 2 3\/8 inches in outside diameter, forming a cushioned barrier between the post and your boat's hull. The fender is molded from a soft, lightweight material that is easy on boat finishes while standing up to repeated contact, and it is highly resistant to UV exposure and fading so it holds its white color and shape through sun exposure. The material is also formulated to resist chalking, splitting, deflating, and crushing, making it suited to long-term outdoor use at the dock.\u003c\/p\u003e\u003cp\u003eMeasuring 7 inches in diameter and 15 inches in height, the 93533-1 provides substantial coverage along the post to help prevent hull scuffs and impact damage during mooring. It mounts to the post using four 5\/16 inch holes, allowing it to be secured in place rather than simply resting loose. This slide-on design is intended for permanent or semi-permanent placement on a fixed dock post rather than as a hanging or rope-mounted fender.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 93533-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Slide-On Post Dock Fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 15 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Post Outside Diameter:\u003c\/strong\u003e 2 3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Holes:\u003c\/strong\u003e Four 5\/16 inch holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Soft, UV-resistant molded material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.6562 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697935335\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size post does the Attwood 93533-1 fit?\u003c\/strong\u003e This fender fits posts up to 2 3\/8 inches in outside diameter, sliding directly over the post for a snug fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this dock fender?\u003c\/strong\u003e The 93533-1 measures 7 inches in diameter and 15 inches in height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 93533-1 fender mounted to a post?\u003c\/strong\u003e It mounts with four 5\/16 inch holes, letting it be secured in place on the post rather than left to spin or slide freely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 93533-1 made from?\u003c\/strong\u003e It is molded from a soft, lightweight material designed to be easy on a boat's hull while resisting chalking, splitting, deflating, and crushing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fender resistant to sun and weather exposure?\u003c\/strong\u003e Yes, the Attwood 93533-1 is highly resistant to UV exposure and fading, so its white color and material integrity hold up under continued outdoor use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this dock fender come in?\u003c\/strong\u003e The 93533-1 is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender be used on a floating dock or does it require a fixed post?\u003c\/strong\u003e It is a slide-on design built to fit over a fixed dock post up to 2 3\/8 inches in diameter; it is not a hanging or rope-mounted fender style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 93533-1 weigh?\u003c\/strong\u003e It weighs 2.6562 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 93533-1?\u003c\/strong\u003e Each order includes one Attwood 93533-1 slide-on post dock fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fender protect against scuffing during docking?\u003c\/strong\u003e Yes, the 93533-1 forms a cushioned barrier over the post so the boat's hull contacts the soft fender material instead of the bare post during mooring.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989676863707,"sku":"ATT-93533-1","price":23.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__44532.1754575137.500.750.jpg?v=1785188488"},{"product_id":"attwood-93553p2-softside-oval-dock-fender-white-5-dia-3-pack-with-reinforced-eye-ends","title":"Attwood 93553P2 SoftSide Oval Boat Fender, White, 5 Inch Diameter, 3-Pack","description":"\u003cp\u003eThe Attwood 93553P2 is a SoftSide oval dock fender sold as a 3-pack, molded from a lightweight polymeric material that stays soft to the touch so it protects hull finishes instead of marking them. Seamless one-piece construction eliminates seams that could crack, split, or trap water, and the material is formulated to resist UV exposure, chalking, splitting, and crushing over repeated use at the dock or alongside another boat. Each fender measures 23 x 5.25 x 14 inches and features thick-wall reinforced eye ends, which stand up to repeated line tie-offs and hanging without tearing out. The white finish matches most hull colors and keeps the fenders looking clean season after season. Because they ship as a matched 3-pack, boat owners can rig one at the bow, one amidships, and one at the stern for consistent coverage along the hull, or use all three on one side when rafting up or docking in tight slips. The fenders are also water resistant, so they hold up in wet conditions without absorbing moisture or losing shape. This is a straightforward, no-hardware-required fender set: hang each fender from its reinforced eye with standard fender line and adjust height to match your dock or slip conditions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 93553P2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Boat Fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e SoftSide Oval\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 3 fenders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polymeric material (plastic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 23 x 5.25 x 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Protection:\u003c\/strong\u003e Anti-UV, resists chalking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697935533\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many fenders come in the Attwood 93553P2 set?\u003c\/strong\u003e The Attwood 93553P2 is sold as a set of 3 white oval fenders, giving matched coverage for the bow, midship, and stern or triple coverage on one side when rafting up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are these fenders?\u003c\/strong\u003e Each Attwood 93553P2 fender measures 23 x 5.25 x 14 inches, a 5 inch diameter oval fender sized for typical dock and rafting use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 93553P2 fender made from?\u003c\/strong\u003e It is molded from a lightweight polymeric material (plastic) that stays soft to the touch to protect hull finishes, using seamless one-piece construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 93553P2 fender resistant to UV and cracking?\u003c\/strong\u003e Yes, the SoftSide construction of the 93553P2 is formulated to resist UV exposure, chalking, splitting, and crushing from repeated dock and hull contact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 93553P2 fender absorb water?\u003c\/strong\u003e No, this fender is water resistant, so it holds its shape and does not take on moisture in wet dock conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this fender set?\u003c\/strong\u003e The Attwood 93553P2 set is white, a finish that matches most hull colors and stays clean-looking over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you hang the 93553P2 fender from a boat or dock?\u003c\/strong\u003e Each 93553P2 fender has a reinforced eye end designed for standard fender line, so it can be tied off and height-adjusted along a rail or dock cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the eye ends reinforced on this fender?\u003c\/strong\u003e Yes, the Attwood 93553P2 uses thick-wall reinforced eye ends that hold up to repeated tie-offs and hanging without tearing out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 93553P2 purchase?\u003c\/strong\u003e The purchase includes 3 white SoftSide oval fenders (part number 93553P2); no additional mounting hardware is included beyond the reinforced eye ends for line attachment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 93553P2 a genuine Attwood product?\u003c\/strong\u003e Yes, 93553P2 is Attwood's own manufacturer part number for this SoftSide oval fender 3-pack, not a generic aftermarket copy.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989676929243,"sku":"ATT-93553P2","price":136.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__79442.1755806737.500.750.jpg?v=1785188690"},{"product_id":"attwood-9355d1-softside-oval-boat-fender-white-5-x-22-uv-resistant-marine-dock-bumper","title":"Attwood 9355D1 Softside Oval Boat Fender, White, 5-Inch x 22-Inch","description":"\u003cp\u003eThe Attwood 9355D1 is a softside oval boat fender molded from a lightweight polymeric material that is soft to the touch and gentle on hulls, while standing up to UV exposure, chalking, splitting, and crushing. Its oval shape and ribbed sides help resist rolling against the hull, keeping the fender in place while docked or rafted up alongside another boat. Double-molded eye ends add extra strength at the points where line takes the most wear, and the fender is built with seamless one-piece construction for consistent durability over years of use.\u003c\/p\u003e\u003cp\u003eMeasuring 5 inches in diameter by 22 inches long, this fender is sized for smaller to mid-size boats needing reliable hull protection at the dock or when tied alongside. It is finished in white to match the majority of hull colors and gelcoat finishes. The fender hangs from a line through the molded eye ends, which are reinforced for added pull strength.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9355D1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Oval\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 22 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5 x 22 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Seamless, one-piece with double-molded eye ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Resistance:\u003c\/strong\u003e UV resistant, resists chalking and splitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.0667 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697893550\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Attwood 9355D1 boat fender?\u003c\/strong\u003e The Attwood 9355D1 measures 5 inches in diameter by 22 inches long, an oval shape sized for smaller to mid-size boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this fender available in?\u003c\/strong\u003e The 9355D1 is finished in white, a neutral color that matches most hull and gelcoat finishes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fender fit any boat?\u003c\/strong\u003e Yes, the 9355D1 is a universal-fit boat fender not tied to a specific make or model, suitable for docking or rafting up alongside another vessel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 9355D1 made from?\u003c\/strong\u003e It is molded from a lightweight polymeric plastic material that is soft to the touch and gentle on hull surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 9355D1 fender resistant to sun exposure?\u003c\/strong\u003e Yes, the fender resists UV damage, chalking, splitting, and crushing, making it suited to long-term exposure at the dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the fender attached to the boat?\u003c\/strong\u003e The 9355D1 hangs from a line run through its double-molded eye ends, which are reinforced for extra pull strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the fender have an oval shape with ribbed sides?\u003c\/strong\u003e The oval shape and ribbed sides of the 9355D1 are designed to resist the fender rolling against the hull while in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 9355D1 weigh?\u003c\/strong\u003e The 9355D1 weighs 1.0667 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 9355D1 a one-piece construction or does it have seams?\u003c\/strong\u003e The 9355D1 has seamless, one-piece construction, which supports its durability over repeated use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Attwood offer this fender in other sizes or multi-packs?\u003c\/strong\u003e Attwood makes related fenders in the same 5-inch by 22-inch size as 2-packs and 3-packs, as well as a larger 6-inch by 24-inch size, under different part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 9355D1?\u003c\/strong\u003e Each order includes one Attwood 9355D1 softside oval boat fender in white.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989676962011,"sku":"ATT-9355D1","price":10.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61O7RPuZkDL.jpg?v=1784487222"},{"product_id":"attwood-9356d1-softside-oval-boat-fender-white-6-x-24-with-reinforced-eye-ends","title":"Attwood Softside Oval Boat Fender 9356D1, Blue, 6 Inch Diameter x 24 Inch Length","description":"\u003cp\u003eThe Attwood 9356D1 is a softside oval boat fender designed to cushion your hull against docks, pilings, and other vessels while you are moored or rafted up. Molded in a smooth oval profile, this fender measures 6 inches in diameter by 24 inches in length, making it well suited for smaller to mid-size boats that need reliable side protection without adding bulk to the deck or swim platform.\u003c\/p\u003e\u003cp\u003eEach fender is built with thick-wall reinforced eye ends at both tips, giving the mounting points added strength where line and rope abrasion typically cause wear over time. The fender body is molded plastic, offering durable resistance to UV exposure, saltwater, and repeated contact against dock edges and pilings. Finished in blue, it is easy to spot against most hull colors and dock backgrounds.\u003c\/p\u003e\u003cp\u003eThis fender ships as a single unit and is intended to be hung from a bow or stern rail, cleat, or rub rail using standard fender line run through the reinforced eye ends. It is a straightforward, no-frills replacement or addition to a boat's fender set for anyone looking to protect gelcoat and paint during docking and rafting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9356D1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Oval (softside)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye Ends:\u003c\/strong\u003e Thick-wall reinforced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.6167 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697893567\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Attwood 9356D1 fender?\u003c\/strong\u003e The Attwood 9356D1 measures 6 inches in diameter by 24 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this fender?\u003c\/strong\u003e The 9356D1 is finished in blue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 9356D1 fender round or oval?\u003c\/strong\u003e It has an oval (softside) profile rather than a straight cylindrical shape.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 9356D1 fender made from?\u003c\/strong\u003e It is made from plastic, molded as a softside fender body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 9356D1 fender weigh?\u003c\/strong\u003e The Attwood 9356D1 weighs 1.6167 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 9356D1 fender come with mounting line included?\u003c\/strong\u003e The Attwood 9356D1 is sold as the fender itself; fender line is attached separately through its eye ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the eye ends on this fender like?\u003c\/strong\u003e The 9356D1 has thick-wall reinforced eye ends at both ends for added strength where mounting line attaches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fenders come in a package?\u003c\/strong\u003e The Attwood 9356D1 is sold as a single fender unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 9356D1 suitable for saltwater use?\u003c\/strong\u003e Yes, its plastic construction is built to hold up to saltwater and UV exposure typical of marine dockside use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 9356D1 fender?\u003c\/strong\u003e The UPC for the Attwood 9356D1 is 022697893567.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a larger size available in this fender line?\u003c\/strong\u003e Attwood also offers this fender style in an 8-inch diameter by 28-inch length size as a separate part number; the 9356D1 specifically is the 6 inch by 24 inch blue version.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989677027547,"sku":"ATT-9356D1","price":50.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71wYvTiiqJL.jpg?v=1784487227"},{"product_id":"taylor-made-super-gard-inflatable-vinyl-boat-fender-5-5-x-20-cranberry-fits-15-to-20-ft-boats-mpn-953520","title":"Taylor Made Products Super Gard Inflatable Vinyl Boat Fender, 5.5 Inch x 20 Inch, Cranberry","description":"\u003cp\u003eThe Taylor Made Products Super Gard is an inflatable vinyl cylindrical boat fender sized 5.5 inches x 20 inches, built to cushion hull sides during docking and mooring. It suits boats ranging from 15 to 20 feet long, giving a fender profile sized to smaller to mid-size recreational boats. The fender features double-molded ends designed to resist ripping and tearing at the seams, the point of a fender most prone to wear from repeated contact with docks and pilings. A ribbed body design helps minimize roll against the hull, keeping the fender in place and providing stable, consistent protection in choppy water or windy conditions. The vinyl construction uses Taylor Made's True Color technology, which is intended to keep the Cranberry color deep and resistant to fading from sun and saltwater exposure over time.\u003c\/p\u003e\u003cp\u003eFor mounting, the Super Gard has a 5\/8 inch double eyelet configuration, allowing it to be hung either vertically or horizontally depending on the boat's rail or cleat setup. Inflation is handled through a rubber football needle valve, and the fender is inflated to 2 psi, which keeps setup and maintenance straightforward. This is a single fender (one Super Gard Boat Fender per unit), sold in the 5.5 inch x 20 inch Cranberry size.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 953520\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Cylindrical Fenders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5.5 inches x 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Cranberry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.84 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 30 x 10.5 x 10.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEyelet Configuration:\u003c\/strong\u003e 5\/8 inch double eyelet, for vertical or horizontal hanging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation Valve:\u003c\/strong\u003e Rubber football needle valve, inflates to 2 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 15 to 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Inflatable vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011535207\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made Products Super Gard fender, part number 953520?\u003c\/strong\u003e Part number 953520 measures 5.5 inches x 20 inches, a cylindrical fender sized for boats roughly 15 to 20 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this fender?\u003c\/strong\u003e This Super Gard fender is Cranberry, finished with Taylor Made's True Color technology to help the color resist fading from sun and saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Super Gard 5.5 inch x 20 inch fender weigh?\u003c\/strong\u003e It weighs 1.84 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I inflate the Super Gard fender?\u003c\/strong\u003e The fender uses a rubber football needle inflation valve and is inflated to 2 psi, part number 953520's specified pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender be hung both vertically and horizontally?\u003c\/strong\u003e Yes. The Super Gard has a 5\/8 inch double eyelet configuration that supports either vertical or horizontal hanging depending on your boat's cleat or rail setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is this fender designed for?\u003c\/strong\u003e The 5.5 inch x 20 inch Super Gard is intended for boats ranging from 15 to 20 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Super Gard fender made of?\u003c\/strong\u003e It is made of inflatable vinyl, molded with double ends at the tips to resist ripping and tearing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the ribbed design help the fender perform?\u003c\/strong\u003e The ribbed body on part number 953520 is designed to minimize roll against the hull, helping the fender stay in place and provide consistent coverage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this fender?\u003c\/strong\u003e Each unit includes one Super Gard Boat Fender, part number 953520, in the 5.5 inch x 20 inch Cranberry size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall packed dimensions of this fender?\u003c\/strong\u003e The Super Gard 953520 has item dimensions of 30 x 10.5 x 10.5 inches.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989678043355,"sku":"NAT-953520","price":26.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71oxL6qsHOL.jpg?v=1784487294"},{"product_id":"taylor-made-products-953622-super-gard-inflatable-boat-fender-6-5-x-22-inch-cranberry","title":"Taylor Made Products Super Gard Inflatable Vinyl Boat Fender, 6.5 x 22 Inch, Cranberry","description":"\u003cp\u003eThe Taylor Made Products Super Gard is an inflatable vinyl boat fender built to cushion your hull from docks, pilings, and neighboring boats during docking and mooring. Made from marine-grade vinyl in a seamless one-piece construction, it stands up to UV exposure and salt water without losing its high-gloss cranberry finish, thanks to a True Color technology that keeps the color deep and rich over time. The fender's ribbed sides are engineered to minimize roll, keeping it in place and providing stable, reliable protection even in choppy conditions alongside the dock.\u003c\/p\u003e\u003cp\u003eEach end is double-molded in black for added strength, resisting the ripping and tearing that can develop at the eyelets over years of use. Two eyelets accept lines up to 5\/8 inch, so it can be hung vertically or horizontally depending on how your boat is rigged for docking. Inflation is handled through a molded rubber football needle valve, which allows quick setup and easy pressure adjustment to the recommended 2 psi. This 6.5 x 22 inch size is suited to boats in the 20 to 25 foot range. The Super Gard is manufactured in the USA by Taylor Made, a member of the Lippert family of companies.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 953622\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Cranberry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 6.5 x 22 inch (diameter x length)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.47 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 20 to 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEyelet Size:\u003c\/strong\u003e 5\/8 inch double eyelet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation Valve:\u003c\/strong\u003e Rubber football needle valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Inflation Pressure:\u003c\/strong\u003e 2 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Seamless one-piece body with ribbed sides\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Caps:\u003c\/strong\u003e Double-molded black ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Vertical or horizontal hanging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011536228\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Taylor Made 953622 Super Gard fender designed for?\u003c\/strong\u003e The 6.5 x 22 inch Super Gard fender, part number 953622, is sized for boats in the 20 to 25 foot range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 953622?\u003c\/strong\u003e Part number 953622 is finished in Cranberry, using Taylor Made's True Color technology to keep the shade deep and resist fading from UV exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Super Gard fender made from?\u003c\/strong\u003e It is made from marine-grade vinyl in a seamless one-piece construction, chosen for its resistance to UV rays and salt water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you inflate the Super Gard fender?\u003c\/strong\u003e The Taylor Made Super Gard 953622 uses a molded rubber football needle valve for inflation, with 2 psi as the recommended pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender be hung both vertically and horizontally?\u003c\/strong\u003e Yes, the 953622 fender has a 5\/8 inch double eyelet configuration that supports either vertical or horizontal hanging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat line size do the eyelets on the 953622 fender accept?\u003c\/strong\u003e The eyelets on this Super Gard fender accept lines up to 5\/8 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Super Gard 953622 fender weigh?\u003c\/strong\u003e This fender weighs 2.47 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are the ends of the Super Gard fender double-molded?\u003c\/strong\u003e Double-molded black ends give the 953622 fender added strength at the eyelets, reducing the risk of ripping or tearing over repeated use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ribbed design serve a functional purpose?\u003c\/strong\u003e Yes, the ribbed sides on the Super Gard 953622 fender are designed to minimize roll, helping it stay in position against the dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Taylor Made Super Gard fender manufactured?\u003c\/strong\u003e The Super Gard 953622 fender is made in the United States by Taylor Made.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when ordering part number 953622?\u003c\/strong\u003e Ordering 953622 includes one Super Gard boat fender in the Cranberry colorway.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989678207195,"sku":"NAT-953622","price":49.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71oxL6qsHOL_148c6af7-67e0-4758-ad47-bad66e6c444b.jpg?v=1784487300"},{"product_id":"taylor-made-super-gard-inflatable-boat-fender-5-5-x-20-ruby-red-fits-5-8-lines-mpn-955520","title":"Taylor Made Super Gard Inflatable Vinyl Boat Fender, 5.5\" x 20\", Ruby Red","description":"\u003cp\u003eThe Taylor Made Super Gard Inflatable Vinyl Boat Fender in Ruby Red is a 5.5\" x 20\" cylindrical fender built to protect a boat's hull from contact with docks, pilings, and other boats. It is made in the USA from marine-grade vinyl that resists UV exposure and salt water exposure, and it is recommended for boats 15 to 20 feet. The fender is made with seamless one-piece construction and a ribbed side design that minimizes roll along the dock, keeping the fender in place instead of spinning against the hull. Both ends are double-molded in black for extra strength at the high-wear points where the fender contacts pilings or other hard surfaces. A molded-in valve accepts a rubber football needle for easy inflation, and the fender ships already inflated. Two eyelets are built into the fender and accept lines up to 5\/8\", giving multiple options for rigging it to a rail or cleat. The vinyl carries a high gloss finish in Ruby Red and is guaranteed for the life of the boat against splitting or bursting. This is a single fender (line not included).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 955520\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5.5\" x 20\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Ruby Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Size:\u003c\/strong\u003e 15 to 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Size Accepted:\u003c\/strong\u003e Up to 5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Construction:\u003c\/strong\u003e Double-molded black ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation Valve:\u003c\/strong\u003e Molded-in valve, rubber football needle inflation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.84 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011555205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 fender\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Taylor Made 955520 fender recommended for?\u003c\/strong\u003e This 5.5\" x 20\" Super Gard fender (part number 955520) is recommended for boats 15 to 20 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat line size fits the eyelets on this fender?\u003c\/strong\u003e The two eyelets on the Taylor Made 955520 fender accept lines up to 5\/8\" in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Taylor Made Super Gard fender inflated?\u003c\/strong\u003e It has a molded-in valve that takes a rubber football needle for inflation, and it ships to you already inflated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the fender made from?\u003c\/strong\u003e The Taylor Made Super Gard fender is made from marine-grade vinyl designed to withstand UV exposure and salt water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fender include a dock line?\u003c\/strong\u003e No, the box contains only the Super Gard fender itself (part number 955520); a mooring or dock line is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the fender have a ribbed side design?\u003c\/strong\u003e The ribbed sides on the Taylor Made 955520 fender minimize roll, so the fender stays positioned against the hull instead of spinning along the dock or piling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the ends of the fender reinforced?\u003c\/strong\u003e Yes, both ends of this Super Gard fender are double-molded in black for extra strength where the fender contacts pilings and other hard surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 955520 fender weigh?\u003c\/strong\u003e The Taylor Made 955520 Super Gard fender weighs 1.84 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 955520?\u003c\/strong\u003e Part number 955520 is the Ruby Red colorway of the Taylor Made Super Gard fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fender guaranteed against splitting?\u003c\/strong\u003e Yes, Taylor Made guarantees the Super Gard fender for the life of the boat against splitting or bursting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Taylor Made Super Gard fender made?\u003c\/strong\u003e The 955520 Super Gard fender is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the fender one-piece or seam-welded construction?\u003c\/strong\u003e The Taylor Made 955520 fender uses seamless one-piece construction rather than welded seams.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989678731483,"sku":"NAT-955520","price":26.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71ZJB-l1R4L_7ed5dddf-64c2-4e15-aa42-018da5b01986.jpg?v=1784487335"},{"product_id":"taylor-made-super-gard-boat-fender-yellow-5-5-x-20-mpn-958520-fits-boats-15-to-35-double-molded-ends-5-8-eyelets","title":"Taylor Made Super Gard Inflatable Boat Fender, 5-1\/2 Inches x 20 Inches, Yellow, for Boats 15 to 20 Feet","description":"\u003cp\u003eThe Taylor Made Super Gard inflatable boat fender is a cylindrical dock fender built to protect your hull from contact with docks, pilings, and other boats during mooring and docking. Sized at 5-1\/2 inches by 20 inches, it is designed for boats ranging from 15 to 20 feet long. The one-piece body is made from marine-grade vinyl that resists UV exposure and salt water, and the fender features Taylor Made's ribbed side technology, which minimizes roll along a dock or piling so the fender stays in place and keeps protecting the hull instead of spinning away. True Color technology helps the yellow finish stay deep and vibrant instead of fading or chalking under sun and salt exposure over time.\u003c\/p\u003e\u003cp\u003eEach end of the fender is double-molded in black for added strength, resisting the ripping and tearing that can develop at the eyelet area on lower-quality fenders. The fender has a 5\/8 inch double eyelet configuration, so it can be hung vertically or horizontally depending on your boat's rail and cleat setup, and the eyelets accept lines up to 5\/8 inch. Inflation is handled through a molded rubber football needle valve, and the fender is inflated to 2 psi for setup or maintenance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 958520\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Super Gard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5-1\/2 inches x 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 15 to 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.84 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEyelet Size:\u003c\/strong\u003e 5\/8 inch double eyelet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Line Size:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation Valve:\u003c\/strong\u003e Rubber football needle valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation Pressure:\u003c\/strong\u003e 2 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHanging Orientation:\u003c\/strong\u003e Vertical or horizontal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Construction:\u003c\/strong\u003e Double-molded black ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011585202\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Taylor Made 958520 Super Gard fender designed for?\u003c\/strong\u003e The 958520 Super Gard fender is designed for boats ranging from 15 to 20 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this fender?\u003c\/strong\u003e The Taylor Made 958520 measures 5-1\/2 inches in diameter by 20 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Super Gard fender made of?\u003c\/strong\u003e The Taylor Made 958520 Super Gard fender is made from marine-grade vinyl that is built to resist UV exposure and salt water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I inflate the 958520 fender?\u003c\/strong\u003e Inflation is done through a molded rubber football needle valve, and the fender should be inflated to 2 psi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender be hung both vertically and horizontally?\u003c\/strong\u003e Yes, the 958520 has a 5\/8 inch double eyelet configuration that supports both vertical and horizontal hanging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum line size the eyelets accept?\u003c\/strong\u003e The eyelets on the Taylor Made Super Gard 958520 accept dock lines up to 5\/8 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fender's yellow color fade over time?\u003c\/strong\u003e Taylor Made's True Color technology is built into the Super Gard 958520 to help the yellow finish resist fading and chalking from sun and salt exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do the ends of the fender look reinforced?\u003c\/strong\u003e The 958520 has double-molded black ends for added strength, which helps prevent ripping and tearing at the eyelets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the ribbed design on the fender do?\u003c\/strong\u003e The ribbed sides on the Taylor Made Super Gard 958520 minimize roll against docks and pilings, helping the fender stay in position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 958520 fender weigh?\u003c\/strong\u003e The Taylor Made 958520 Super Gard fender weighs 1.84 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 958520 fender sold as a single unit?\u003c\/strong\u003e Yes, the Taylor Made 958520 is sold as one Super Gard boat fender.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989678895323,"sku":"NAT-958520","price":26.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61lMSuz4rwL.jpg?v=1784487345"},{"product_id":"taylor-made-super-gard-inflatable-boat-fender-6-5-x-22-ribbed-vinyl-dock-fender-for-boats-15-35-yellow","title":"Taylor Made Super Gard Inflatable Boat Fender 958622, 6.5 x 22 Inches, Yellow, Fits Boats 15 to 35 Feet","description":"\u003cp\u003eThe Taylor Made Super Gard Inflatable Boat Fender (part number 958622) protects your hull from dock pilings and other boats during mooring and docking. Built with one-piece seamless construction and a ribbed fendering design, this cylindrical fender minimizes roll while cushioning contact against hard surfaces. It is made from marine-grade vinyl engineered to withstand long-term UV exposure and salt water without cracking or fading, so the high-gloss yellow finish holds up season after season.\u003c\/p\u003e\u003cp\u003eEach fender features double-molded black ends that resist ripping and tearing under the stress of compression and flexing, along with two reinforced eyelets that accept lines up to 5\/8 inch, giving you flexibility for hanging the fender vertically or horizontally depending on your docking setup. Inflation is handled through a molded rubber football-style needle valve for quick, easy fills. At 6.5 inches by 22 inches, this fender is sized for boats ranging from 15 to 35 feet, making it a versatile choice for a wide range of vessels. The fender ships as a single unit and is intended for general docking and mooring use rather than as a fitment-specific replacement part.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 958622\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Inflatable Vinyl Boat Fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 6.5 inches x 22 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 15 feet to 35 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Compatibility:\u003c\/strong\u003e Up to 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Construction:\u003c\/strong\u003e Double-molded black ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation Valve:\u003c\/strong\u003e Molded rubber football needle valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.47 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 1 Super Gard boat fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011586223\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Taylor Made 958622 fender designed for?\u003c\/strong\u003e This 6.5 inch by 22 inch fender is designed for boats in the 15 foot to 35 foot range, covering most recreational runabouts, cruisers, and small to mid-size boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender be hung vertically or horizontally?\u003c\/strong\u003e Yes, the Super Gard fender 958622 has two eyelets that let you hang it either vertically or horizontally, so you can adjust the setup based on your dock or slip configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat line size works with the eyelets on this fender?\u003c\/strong\u003e The eyelets on the Taylor Made 958622 accept lines up to 5\/8 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Taylor Made Super Gard fender made from?\u003c\/strong\u003e It is made from marine-grade vinyl that is built to resist long-term UV exposure and salt water exposure without cracking or fading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you inflate this boat fender?\u003c\/strong\u003e The 958622 fender inflates through a molded rubber football-style needle valve, which allows for quick and easy inflation with a standard needle pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this fender come in?\u003c\/strong\u003e This listing for part number 958622 is the yellow version of the Super Gard fender, finished in a high-gloss coating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fender have reinforced ends to prevent tearing?\u003c\/strong\u003e Yes, double-molded black ends on the 958622 fender are built to resist ripping and tearing under compression and repeated flexing against docks or other boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a one-piece fender or does it have seams?\u003c\/strong\u003e The Taylor Made Super Gard fender uses one-piece, seamless construction with a ribbed side design that helps minimize rolling against the dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 958622 fender weigh?\u003c\/strong\u003e The Taylor Made Super Gard fender, part number 958622, weighs 2.47 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this fender?\u003c\/strong\u003e Each order of part number 958622 includes one Super Gard inflatable vinyl boat fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fender a genuine Taylor Made product?\u003c\/strong\u003e Yes, part number 958622 is a genuine Taylor Made Super Gard fender, not a generic or aftermarket equivalent.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989679059163,"sku":"NAT-958622","price":49.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61lMSuz4rwL_9b6adbb5-0d79-4e25-baac-cf12b281ed9d.jpg?v=1784487353"},{"product_id":"taylor-made-super-gard-inflatable-boat-fender-8-5-x-26-yellow-mpn-958824-fits-15-to-35-boats","title":"Taylor Made Products Super Gard Inflatable Vinyl Boat Fender, 8.5 x 26 Inches, Yellow, for Boats 25 to 35 Feet","description":"\u003cp\u003eThe Taylor Made Products Super Gard is an inflatable vinyl boat fender built to cushion your hull during docking and mooring. Sized at 8.5 inches by 26 inches, it is designed for boats ranging from 25 to 35 feet long, providing a buffer between your vessel and the dock or neighboring boats.\u003c\/p\u003e\u003cp\u003eThe fender body is made of tough marine-grade vinyl that resists the wear and tear of daily use on the water. Its ends are double-molded, which helps them resist ripping and tearing so the fender holds up under repeated contact and turbulent conditions. A ribbed profile along the body minimizes rolling, keeping the fender in place and providing stability where a smooth-sided fender might slip. The vinyl uses Taylor Made's True Color technology, which is intended to keep the yellow finish looking rich and vibrant rather than fading out under sun and saltwater exposure over time.\u003c\/p\u003e\u003cp\u003eFor mounting, the Super Gard has a 5\/8 inch double eyelet configuration at each end, allowing it to be hung vertically or horizontally depending on your boat's rub rail height and how you want it positioned along the hull. Inflation is handled through a rubber football needle valve, which lets you air the fender up to 2 psi using a standard needle-style pump, making setup and maintenance straightforward.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 958824\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Cylindrical Fenders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 8.5 inches x 26 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tough marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 25 to 35 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEyelet Configuration:\u003c\/strong\u003e 5\/8 inch double eyelet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation Valve:\u003c\/strong\u003e Rubber football needle valve, inflates to 2 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Docking and mooring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHanging Options:\u003c\/strong\u003e Vertical or horizontal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.65 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011588241\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Taylor Made Super Gard 958824 designed for?\u003c\/strong\u003e This fender is designed for boats ranging from 25 to 35 feet long, giving larger vessels enough cushioning at the dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this fender?\u003c\/strong\u003e The Super Gard fender measures 8.5 inches by 26 inches, an inflatable cylindrical shape sized to sit between the hull and the dock or piling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender be hung horizontally as well as vertically?\u003c\/strong\u003e Yes, the 958824 has a 5\/8 inch double eyelet configuration at each end, so it can be rigged either vertically or horizontally depending on your rub rail height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the fender made from?\u003c\/strong\u003e It is made of tough marine-grade vinyl, chosen for its ability to hold up against sun, saltwater, and repeated contact with docks and other boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I inflate the fender and to what pressure?\u003c\/strong\u003e The Super Gard uses a rubber football needle inflation valve, and Taylor Made recommends inflating it to 2 psi using a standard needle-style pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the yellow color fade over time?\u003c\/strong\u003e The 958824 fender uses Taylor Made's True Color technology, which is intended to keep the yellow finish looking deeper and richer for longer than standard vinyl under marine sun exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fender weigh?\u003c\/strong\u003e The Taylor Made Super Gard 8.5 x 26 inch fender weighs 4.65 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fender come with rope or line to hang it?\u003c\/strong\u003e The listing covers the Super Gard fender itself (part number 958824); no mounting line is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps this fender from rolling against the hull?\u003c\/strong\u003e A ribbed design along the body of the Super Gard fender minimizes rolling, which helps it stay in position and provide consistent protection while docked.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the ends of the fender reinforced?\u003c\/strong\u003e Yes, the 958824 Super Gard has double-molded ends that are built to resist ripping and tearing at the points that see the most wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fender only for the color yellow?\u003c\/strong\u003e This listing for part number 958824 is the yellow version of the Super Gard fender in the 8.5 x 26 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Super Gard fender inflatable or foam-filled?\u003c\/strong\u003e The Taylor Made Super Gard 958824 is an inflatable vinyl fender, not a foam-filled type, and is aired up through its needle valve to 2 psi.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989679091931,"sku":"NAT-958824","price":80.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61lMSuz4rwL_5eb91e39-1e63-42fb-9ce4-b0984ef8e21a.jpg?v=1784487354"},{"product_id":"taylor-made-super-gard-boat-fender-5-5-x-20-sand-ribbed-inflatable-marine-grade-vinyl-fender-mpn-960520","title":"Taylor Made Super Gard Inflatable Boat Fender, 5.5 x 20 Inches, Sand","description":"\u003cp\u003eThe Taylor Made Super Gard Boat Fender is an inflatable vinyl fender built to protect a boat's hull from contact with docks, pilings, and other boats during docking and mooring. Made from marine-grade vinyl, it is designed to withstand UV exposure and salt water without breaking down, and it is intended for boats ranging from 15 to 20 feet long. The fender uses a seamless one-piece construction with a ribbed side profile that minimizes roll, keeping the fender in place and providing stable protection in choppy conditions at the dock. Both ends are double-molded in black for added strength, resisting the ripping and tearing that can occur at high-wear contact points. Two 5\/8 inch eyelets are built into the fender, allowing it to be hung either vertically or horizontally depending on your boat's layout and mooring needs, and accepting lines up to 5\/8 inch. Inflation is handled through a molded rubber football needle valve, which allows the fender to be quickly inflated (to approximately 2 psi) and deflated for storage. The Super Gard line uses True Color technology to help the vinyl resist fading and maintain a deeper, richer finish over time. This fender is finished in Sand and is sized 5.5 inches by 20 inches.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 960520\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 5.5 inches x 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Sand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 30 x 10.5 x 10.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions (L x W x H):\u003c\/strong\u003e 18.3 x 5.9 x 5.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.84 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEyelet Configuration:\u003c\/strong\u003e 5\/8 inch double eyelet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation Valve:\u003c\/strong\u003e Rubber football needle valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Inflation Pressure:\u003c\/strong\u003e 2 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 15 to 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011960528\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRecommended for boats ranging from 15 to 20 feet long; not designated for a specific make or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Taylor Made 960520 fender designed for?\u003c\/strong\u003e This Super Gard fender is recommended for boats ranging from 15 to 20 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Super Gard fender made from?\u003c\/strong\u003e It is made from marine-grade vinyl designed to withstand UV exposure and salt water without breaking down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 960520?\u003c\/strong\u003e Part number 960520 is finished in Sand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I inflate the fender?\u003c\/strong\u003e The Taylor Made 960520 fender inflates through a molded rubber football needle valve, up to a recommended pressure of 2 psi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this fender?\u003c\/strong\u003e The Super Gard fender measures 5.5 inches by 20 inches, with item dimensions listed at 30 x 10.5 x 10.5 inches and package dimensions of 18.3 x 5.9 x 5.6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fender weigh?\u003c\/strong\u003e The 960520 fender weighs 1.84 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fender have a ribbed design?\u003c\/strong\u003e Yes, the Super Gard fender uses a ribbed side profile that minimizes roll, helping it stay in place against the hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many eyelets does the fender have and what size line do they accept?\u003c\/strong\u003e The 960520 fender has two 5\/8 inch eyelets, which accept mooring or docking lines up to 5\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender be hung both vertically and horizontally?\u003c\/strong\u003e Yes, the double eyelet configuration on the Taylor Made Super Gard fender allows it to be hung either vertically or horizontally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes the ends of this fender more durable?\u003c\/strong\u003e Both ends of the Super Gard fender are double-molded in black, which resists ripping and tearing at the high-wear eyelet points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this fender?\u003c\/strong\u003e Ordering part number 960520 includes one Super Gard boat fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the color fade over time?\u003c\/strong\u003e The Super Gard fender uses True Color technology intended to maintain a deeper, richer color and resist fading from marine elements over time.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989679485147,"sku":"NAT-960520","price":26.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61HfFVw6BfL.jpg?v=1784487376"},{"product_id":"gen3-marine-8-5-x-27-cylindrical-boat-fender-black-dock-and-mooring-bumper","title":"Gen3 Marine Boat Fender 8.5 Inch x 27 Inch Black Cylindrical Fender","description":"\u003cp\u003eThe Gen3 Marine cylindrical boat fender measures 8.5 inches by 27 inches and provides a protective buffer between your hull and the dock or neighboring vessels. Its cylindrical shape allows it to roll along a piling or dock edge, absorbing impact and reducing scuffing and paint damage during docking, rafting, and mooring. Finished in black, it works with a wide range of hull colors without drawing attention to itself. At 5.6 pounds, it is substantial enough to hold its position along the hull while remaining manageable to hang, adjust, and stow. This fender is suited for boats that need reliable side protection at the dock, whether used singly at a bow or stern point or in a set spaced along the length of the hull. Owners typically rig it with a fender line through the end eyelets so it hangs at the correct height for their gunwale, and it can be moved from side to side as docking conditions change.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7-11827\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Cylindrical Fenders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 8.5 inches x 27 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.6 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Gen3 Marine 7-11827 boat fender?\u003c\/strong\u003e The Gen3 Marine 7-11827 fender measures 8.5 inches by 27 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this fender?\u003c\/strong\u003e This Gen3 Marine cylindrical fender, part number 7-11827, is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the fender weigh?\u003c\/strong\u003e The Gen3 Marine 7-11827 fender weighs 5.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape is the Gen3 Marine 7-11827 fender?\u003c\/strong\u003e It is a cylindrical fender, designed to roll along a dock edge or piling as the boat moves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this fender attached to the boat?\u003c\/strong\u003e A fender line is run through the end eyelets of the Gen3 Marine 7-11827 and tied off to a cleat or rail so it hangs at the desired height along the hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many of these fenders does a boat typically need?\u003c\/strong\u003e Boats commonly use two to four cylindrical fenders like the Gen3 Marine 7-11827 spaced along the hull for even protection, though the exact number depends on boat length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the fender be repositioned for docking on either side?\u003c\/strong\u003e Yes, because the Gen3 Marine 7-11827 hangs from a line through its end eyelets, it can be moved from the port side to the starboard side as docking conditions require.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 7-11827 fender suitable for rafting boats together?\u003c\/strong\u003e Its cylindrical shape and 27 inch length make the Gen3 Marine 7-11827 suitable for use between rafted boats as well as at the dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when ordering this fender?\u003c\/strong\u003e The listing for Gen3 Marine part number 7-11827 includes one 8.5 inch by 27 inch cylindrical fender in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fender scuff or mark the hull?\u003c\/strong\u003e The Gen3 Marine 7-11827 is designed as a protective buffer to reduce scuffing and impact damage to the hull, rather than cause it.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991713820891,"sku":"GEN-7-11827","price":24.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_57671ed4-302a-40cf-8937-39aced94735d.jpg?v=1785349362"},{"product_id":"gen3-marine-twin-eye-boat-fender-6-5-x-23-inch-black-ribbed-vinyl","title":"Gen3 Marine Twin Eye Boat Fender, 6.5 x 23 Inch, Black, Ribbed Vinyl","description":"\u003cp\u003eThe Gen3 Marine Twin Eye Boat Fender is a cylindrical dock fender built to cushion your hull during docking and mooring. Constructed from marine-grade vinyl, it is designed to hold up to repeated contact with docks, pilings, and other boats across multiple seasons on the water. The exterior features a ribbed surface that adds extra reinforcement and helps the fender resist abrasion at the points where it makes the most contact.\u003c\/p\u003e\u003cp\u003eAs a twin eye fender, it has an eye fitting at each end so it can be rigged horizontally along a hull or dock, giving flexible placement options depending on your boat and berth setup. The eyes are reinforced to resist wear from the rope or line used to hang the fender, helping the attachment points hold up over time instead of tearing out. Inflation is handled through a built-in valve, so the fender can be quickly inflated to the firmness needed for cushioning and deflated for compact storage when not in use.\u003c\/p\u003e\u003cp\u003eFinished in black, this fender is sized at 6.5 inches in diameter by 23 inches in length, a size suited to a range of boat sizes looking for reliable side or dock protection. It is a straightforward, functional accessory for boat owners who want dependable hull protection without added complexity.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7-11623\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 23 x 7.5 x 3.13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Style:\u003c\/strong\u003e Twin Eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Design:\u003c\/strong\u003e Ribbed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Cylindrical Fenders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037462791\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Gen3 Marine Twin Eye Boat Fender (part 7-11623)?\u003c\/strong\u003e It measures 23 x 7.5 x 3.13 inches overall, with a 6.5 inch diameter body and 23 inch length, and weighs 2.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this fender made of?\u003c\/strong\u003e The 7-11623 fender is made from marine-grade vinyl with a ribbed exterior for added strength and abrasion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'twin eye' mean for this fender?\u003c\/strong\u003e Twin eye means the fender has an attachment eye at each end, allowing it to be rigged horizontally along a hull or dock rather than hung vertically from a single point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you inflate this boat fender?\u003c\/strong\u003e The Gen3 Marine 7-11623 fender has a built-in inflation valve, so it can be inflated with a standard air pump and deflated for compact storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this fender come in?\u003c\/strong\u003e This fender is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat sizes is this fender suited for?\u003c\/strong\u003e At 6.5 inches in diameter and 23 inches long, the Gen3 Marine Twin Eye Boat Fender is sized for a range of boat sizes needing dock or side protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the rope holds on this fender reinforced?\u003c\/strong\u003e Yes, the eyes on the 7-11623 fender are reinforced to resist wear and tear from the rope or line used to hang it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this fender have a ribbed surface?\u003c\/strong\u003e The ribbed design on the Gen3 Marine 7-11623 fender adds extra reinforcement, increasing the fender's overall strength and durability against repeated contact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when you order this fender?\u003c\/strong\u003e Ordering part 7-11623 includes one Gen3 Marine Twin Eye Boat Fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender be used for multiple seasons?\u003c\/strong\u003e Yes, the marine-grade vinyl construction of the 7-11623 fender is built for multi-season durability rather than single-use or short-term protection.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":49017590710491,"sku":"GEN-7-11623","price":13.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51oo0mQ_nAL_d6291a9f-6507-45ce-960c-755cd57b5706.jpg?v=1785331001"},{"product_id":"polyform-a-series-white-net-buoy-fender-10-inch-part-number-36-060-532","title":"Polyform A-Series White Net Buoy Fender, 10 Inch, Part Number 36-060-532","description":"\u003cp\u003eThe Polyform A-Series White Net Buoy is the all-purpose round fender and marker buoy that put Polyform on the map. Built with even wall thickness for maximum durability, it holds up in the roughest conditions, whether you are marking gear on open ocean, a river, or a working dock. Its signature blue ropehold has been redesigned for improved strength and durability, giving it a reliable attachment point that stands up to repeated use in heavy seas.\u003c\/p\u003e\u003cp\u003eInflation and deflation are handled through Polyform's own vinyl valve system, a simple, reliable design used across the A-Series line. This buoy's white body with net-style profile makes it easy to spot on the water, whether it is deployed as a crab or lobster pot marker, a mooring buoy, or a rafting fender between boats.\u003c\/p\u003e\u003cp\u003eThis listing is for the 10 inch diameter White Net Buoy, Polyform part number 36-060-532. It ships as a single buoy at 1.5 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Polyform\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 36-060-532\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Round Fenders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e A-Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 9.84 x 9.84 x 9.84 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve System:\u003c\/strong\u003e Polyform vinyl inflation\/deflation valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRopehold:\u003c\/strong\u003e Reinforced blue ropehold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 743952900416\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Polyform White Net Buoy?\u003c\/strong\u003e The Polyform White Net Buoy, part number 36-060-532, is 10 inches in diameter with package dimensions of 9.84 x 9.84 x 9.84 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this buoy weigh?\u003c\/strong\u003e This Polyform A-Series buoy weighs 1.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the buoy?\u003c\/strong\u003e It is white with Polyform's signature blue ropehold for easy identification on the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you inflate and deflate this buoy?\u003c\/strong\u003e The 36-060-532 buoy uses Polyform's own vinyl valve system for inflation and deflation, the same design used across the A-Series line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this buoy be used in rough water or heavy seas?\u003c\/strong\u003e Yes, the A-Series construction of this Polyform buoy, including its even wall thickness and reinforced ropehold, is built to hold up in adverse conditions such as open ocean, sea, or river use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this buoy genuine Polyform, not an aftermarket copy?\u003c\/strong\u003e Yes, this is a genuine Polyform product, part number 36-060-532, from the original A-Series line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the ropehold made of and how strong is it?\u003c\/strong\u003e The buoy features a reinforced, redesigned blue ropehold built for improved strength and durability compared to earlier A-Series designs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this buoy be used as a rafting fender?\u003c\/strong\u003e Yes, the Polyform White Net Buoy is suited for use as a rafting fender in addition to its use as a mooring or marker buoy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when you order this buoy?\u003c\/strong\u003e Ordering part number 36-060-532 gets you one Polyform White Net Buoy with its attached ropehold and valve system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The UPC for the Polyform White Net Buoy, part number 36-060-532, is 743952900416.\u003c\/p\u003e","brand":"Polyform Fenders","offers":[{"title":"Default Title","offer_id":49026442559707,"sku":"POL-A0WHT","price":38.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/619oMVDBmVL_8949f0d4-e758-4364-b21c-777a15810d2e.jpg?v=1785330991"},{"product_id":"hull-hugr-contour-pwc-fender-black-hh-p1b-personal-watercraft-dock-fender","title":"Hull Hugr Contour PWC Fender, Black - HH-P1B Personal Watercraft Dock Fender","description":"\u003cp\u003eThe Hull Hugr Contour PWC Fender is a rubber fender purpose-built for personal watercraft, designed to protect a PWC's hull when docking at slips and docks sized for larger boats. Unlike fenders designed for boats, the Contour PWC Fender hinges in the center, allowing it to wrap around and cushion the contour of a PWC's hull rather than sitting flat against it. An integrated molded acetyl hook is built into the back of the fender so it can hook directly under the PWC's rub rail for quick attachment. If the PWC does not have a rub rail attachment point, the fender's strap can instead be threaded through the included rubber block and placed inside the PWC's storage compartment, where the block holds the strap securely without damaging the body of the craft. The Hull Hugr Contour PWC Fender is finished in black rubber and measures 12.5 inches wide, 4 inches high, and 5 inches long, with a weight of 0.975 pounds. It fits all PWCs, and two fenders are recommended per PWC for balanced protection on both sides while docked.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Hull Hugr\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HH-P1B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 12.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.975 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 737826021154\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Quantity:\u003c\/strong\u003e 2 fenders per PWC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Integrated molded acetyl hook attaches under the rub rail; adjustable strap threads through included rubber block for storage-compartment mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits all PWCs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe Hull Hugr Contour PWC Fender fits all personal watercraft.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Hull Hugr Contour PWC Fender used for?\u003c\/strong\u003e The Hull Hugr Contour PWC Fender (HH-P1B) protects a personal watercraft's hull from impact damage when docking at slips and docks built for larger boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HH-P1B fender fit all personal watercraft?\u003c\/strong\u003e Yes, the Hull Hugr Contour PWC Fender is designed to fit all PWCs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fenders do I need per PWC?\u003c\/strong\u003e Two Hull Hugr Contour PWC Fenders are recommended per PWC for even protection on both sides while docked.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Hull Hugr Contour PWC Fender attach to a PWC?\u003c\/strong\u003e An integrated molded acetyl hook on the back of the fender hooks directly under the PWC's rub rail; if the PWC lacks that attachment point, the strap threads through the included rubber block and secures inside the storage compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Hull Hugr Contour PWC Fender made from?\u003c\/strong\u003e The HH-P1B fender is made of black rubber, with a molded acetyl hook integrated into the back for attachment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Hull Hugr Contour PWC Fender?\u003c\/strong\u003e The Hull Hugr Contour PWC Fender measures 12.5 inches wide, 4 inches high, and 5 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Hull Hugr Contour PWC Fender weigh?\u003c\/strong\u003e The HH-P1B fender weighs 0.975 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the fender hinge in the center?\u003c\/strong\u003e The center hinge on the Hull Hugr Contour PWC Fender lets it contour around the curved hull of a PWC, offering closer protection than a straight fender made for larger boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the mounting strap damage my PWC's storage compartment?\u003c\/strong\u003e No, the rubber block included with the Hull Hugr Contour PWC Fender holds the strap securely inside the storage compartment without damaging the craft's body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Hull Hugr Contour PWC Fender (HH-P1B)?\u003c\/strong\u003e This fender is black.\u003c\/p\u003e","brand":"Hull Hugr","offers":[{"title":"Default Title","offer_id":49027998679259,"sku":"K-T-HH-P1B","price":18.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/1__72184.1756308922.500.750.jpg?v=1785164350"},{"product_id":"hull-hugr-folding-boat-fender-blue-large-9-foot-open-length","title":"Hull Hugr Folding Boat Fender, Blue, Large, 9-Foot Open Length","description":"\u003cp\u003eThe Hull Hugr HH-L is a folding boat fender built for large vessels that need reliable hull protection without the storage bulk of a rigid or inflatable fender. The fender is constructed from a UV- and puncture-resistant marine-grade vinyl\/polyester tri-laminate shell wrapped around six separate blocks of sealed, closed-cell foam. Because the cushioning is divided into six independent foam blocks rather than one air chamber, the fender keeps working even if a single section is damaged, unlike an inflatable fender that loses all of its protection from one puncture.\u003c\/p\u003e\u003cp\u003eWhen unfolded, the Hull Hugr HH-L extends to 9 feet in length and 26 inches in height, giving it enough coverage to run along a large hull section or dock edge. Each individual foam bumper segment measures 24 inches by 6 inches by 2.5 inches. The fender folds down for compact storage when not deployed, making it practical for boats with limited dock box or locker space. It is finished in blue and ships as a single fender per pack.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Hull Hugr\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HH-L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Folding boat fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV- and puncture-resistant marine-grade vinyl\/polyester tri-laminate with closed-cell foam blocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Foam Blocks:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen Dimensions:\u003c\/strong\u003e 9 feet long x 26 inches high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEach Foam Bumper Dimensions:\u003c\/strong\u003e 24 inches x 6 inches x 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.09375 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 1 fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 737826016075\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow big is the Hull Hugr HH-L when it is fully open?\u003c\/strong\u003e Fully unfolded, the Hull Hugr HH-L measures 9 feet long by 26 inches high, sized for protecting large sections of hull or dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Hull Hugr HH-L fender fold up for storage?\u003c\/strong\u003e Yes, the HH-L is a folding-design fender, so it collapses down for compact storage when it is not deployed over the side of the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Hull Hugr HH-L fender made of?\u003c\/strong\u003e It uses a UV- and puncture-resistant marine-grade vinyl\/polyester tri-laminate exterior wrapped around blocks of closed-cell foam, giving the HH-L fender both weather resistance and cushioning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many foam blocks are inside the HH-L fender?\u003c\/strong\u003e The Hull Hugr HH-L contains six separate blocks of sealed, closed-cell foam rather than a single air chamber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens if one section of the HH-L fender is punctured?\u003c\/strong\u003e Because the HH-L uses six independent sealed foam blocks, damage to one block does not deflate or disable the rest of the fender, unlike a single-chamber inflatable fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of each foam bumper section on the HH-L?\u003c\/strong\u003e Each foam bumper section on the Hull Hugr HH-L measures 24 inches by 6 inches by 2.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Hull Hugr HH-L fender weigh?\u003c\/strong\u003e The Hull Hugr HH-L weighs 6.09375 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the Hull Hugr HH-L fender come in?\u003c\/strong\u003e The HH-L is finished in blue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fenders are included when I order the HH-L?\u003c\/strong\u003e One Hull Hugr HH-L fender is included per order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Hull Hugr HH-L fender resistant to UV and sun exposure?\u003c\/strong\u003e Yes, the HH-L's vinyl\/polyester tri-laminate shell is UV-resistant as well as puncture-resistant for long-term outdoor use on the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Hull Hugr HH-L fender inflatable?\u003c\/strong\u003e No, the HH-L is not an inflatable fender. It relies on six sealed closed-cell foam blocks for cushioning instead of air pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size classification is the Hull Hugr HH-L fender?\u003c\/strong\u003e The Hull Hugr HH-L is the large size in its fender lineup, with a 9-foot open length and 26-inch open height.\u003c\/p\u003e","brand":"Hull Hugr","offers":[{"title":"Default Title","offer_id":49031624556763,"sku":"K-T-HH-L","price":97.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71H_Diqff7L.jpg?v=1785217012"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/Polyform-G6-SF-white.jpg?v=1785356943","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-docking-fendering-boat-fenders-round-cylindrical-fenders.oembed?page=3","provider":"Good Vibes Marina","version":"1.0","type":"link"}