{"title":"Cleats","description":null,"products":[{"product_id":"sea-dog-040104-1-open-base-cleat-4-inch-flat-head-hot-dipped-galvanized-cast-iron-pair-for-recreational-boats-and-docks","title":"Sea-Dog Hot Dipped Galvanized Cast Iron Flat Head Open Base Cleat, 4 Inch, Pair - 040104-1","description":"\u003cp\u003eThe Sea-Dog 040104-1 is a 4 inch flat head open base cleat constructed of hot dipped galvanized cast iron for corrosion resistance in marine environments. It is designed for use on smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications. The open base, flat head design allows the cleat to sit low and flush against the mounting surface, giving dock lines and mooring lines a secure, snag-resistant tie-off point. This listing is for a matched pair of cleats, each installed with two flat head thru-bolts (not included). The hot dip galvanizing process bonds a protective zinc coating to the cast iron body, helping the cleat resist rust and saltwater corrosion over repeated exposure. Sized specifically at the 4 inch length, this cleat uses a #10 flat head fastener and fits the corresponding bolt-hole dimensions listed below. Sea-Dog offers this same open base cleat design in multiple sizes (3-1\/2 inch through 14 inch), so boat owners can match cleat size to boat length and line diameter. Choose the 040104-1 when a compact, budget-friendly, corrosion-resistant cleat pair is needed for smaller boats, tenders, jon boats, and residential or recreational docks.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040104-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Hot Dipped Galvanized Cast Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hot Dipped Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Two flat head thru-bolts required (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.498 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5 x 4 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514040020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eIntended for smaller recreational boats and recreational docks; not recommended for large boats or commercial applications.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 040104-1 cleat?\u003c\/strong\u003e The Sea-Dog 040104-1 is a 4 inch flat head open base cleat, measured as the primary length dimension of the cleat body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat sold as a single unit or a pair?\u003c\/strong\u003e The 040104-1 is sold as a pair of two matching cleats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 040104-1 cleat made from?\u003c\/strong\u003e It is made of hot dipped galvanized cast iron, which provides corrosion resistance for marine and dockside use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used on large boats or commercial vessels?\u003c\/strong\u003e No. The 040104-1 flat head open base cleat is designed for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener size does the 040104-1 use?\u003c\/strong\u003e This cleat uses a #10 flat head fastener and installs with two flat head thru-bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting bolts included with the 040104-1?\u003c\/strong\u003e No, the two flat head thru-bolts needed to install the Sea-Dog 040104-1 cleat are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 040104-1 cleat pair weigh?\u003c\/strong\u003e The Sea-Dog 040104-1 pair weighs 0.498 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the key dimensions of the 040104-1 cleat?\u003c\/strong\u003e The 040104-1 measures 4 inches (A), with additional body dimensions of 1-1\/8 inches (B), 7\/8 inch (C), and 1-7\/8 inches (D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is it called an open base cleat?\u003c\/strong\u003e The 040104-1 has an open base, flat head design that sits low against the mounting surface, which is characteristic of Sea-Dog's flat head open base cleat line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 040104-1 and other sizes in this cleat line?\u003c\/strong\u003e The 040104-1 is the 4 inch size in Sea-Dog's flat head open base cleat family, which also includes 3-1\/2 inch, 5 inch, 6 inch, 8 inch, 10 inch, 12 inch, and 14 inch versions with correspondingly larger dimensions and fastener sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 040104-1 cleat pair?\u003c\/strong\u003e The UPC for this Sea-Dog 4 inch open base cleat pair is 035514040020.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 040104-1 corrode in saltwater?\u003c\/strong\u003e The hot dipped galvanized cast iron construction of the 040104-1 is corrosion resistant, making it suitable for saltwater and marine dock environments.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543221979,"sku":"S-D-040104-1","price":6.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3956.jpg?v=1784421515"},{"product_id":"sea-dog-cl209-midi-clamcleat-nylon-rope-cleat-for-5-32-to-5-16-in-4-8-mm-line-mpn-002090-1","title":"Sea-Dog CL209 Clamcleat Midi Rope Cleat for 3\/16 to 5\/16 Inch Rope, Black Aluminum","description":"\u003cp\u003eThe Sea-Dog CL209 Clamcleat Midi is a cam-style rope cleat designed to grip and hold line under load without the need to wrap or tie off, letting you release rope instantly with a simple upward pull. Sized for rope diameters from 3\/16 inch to 5\/16 inch, it is well suited to halyards, sheets, fender lines, and other running rigging on small to mid-size boats where quick, one-handed cleating is useful. The cleat body is cast from aluminum and finished in black, giving it a low-profile look that blends in with dark hardware and trim.\u003c\/p\u003e\u003cp\u003eUnlike a traditional horn cleat, the clamcleat design uses angled teeth to bite the rope automatically as tension is applied, then releases cleanly when the line is pulled up and out of the jaw. This makes it a practical upgrade anywhere fast, repeated cleating and uncleating is needed. The unit measures 2-7\/8 inches in length with a 2-1\/8 inch inside length and a 3\/4 inch width, and it mounts with 3\/16 inch screws (not included) through the base.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 002090-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Clamcleat Midi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Diameter Range:\u003c\/strong\u003e 3\/16 inch to 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 2-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Length:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Size:\u003c\/strong\u003e 3\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.052 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rope does the Sea-Dog CL209 fit?\u003c\/strong\u003e The Sea-Dog CL209 Clamcleat Midi is designed for rope diameters from 3\/16 inch to 5\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a Clamcleat rope cleat work?\u003c\/strong\u003e It uses angled teeth inside the cleat jaw that bite down on the rope automatically as tension is applied, holding the line without wrapping or tying it off; pulling the rope up and out of the jaw releases it instantly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the CL209 made from?\u003c\/strong\u003e The CL209 cleat body is aluminum, finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this cleat?\u003c\/strong\u003e The Sea-Dog CL209 measures 2-7\/8 inches in length and 3\/4 inch in width, with an inside length of 2-1\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat screw size is needed to mount the CL209?\u003c\/strong\u003e It mounts using 3\/16 inch screws, which are not included with part number 002090-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CL209 weigh?\u003c\/strong\u003e This cleat weighs 0.052 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CL209 a locking cleat?\u003c\/strong\u003e Yes, in effect: the cam-style jaw grips the rope under load so it stays cleated without needing to be tied, and releases only when the rope is pulled clear of the teeth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this cleat?\u003c\/strong\u003e The part is Sea-Dog 002090-1, also known as the CL209 Midi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the CL209 come in?\u003c\/strong\u003e It is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this cleat typically used for on a boat?\u003c\/strong\u003e Because it grips and releases rope quickly without tying off, the CL209 Midi suits applications like halyards, sheets, and fender lines where fast, one-handed cleating is helpful.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CL209 come with mounting hardware?\u003c\/strong\u003e No, the Sea-Dog CL209 (002090-1) requires 3\/16 inch mounting screws that are sold separately.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543254747,"sku":"S-D-002090-1","price":6.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6242.jpg?v=1784421536"},{"product_id":"sea-dog-040105-1-flat-head-open-base-cleat-5-in-hot-dipped-galvanized-cast-iron-pair","title":"Sea-Dog Flat Head Open Base Cleat, 5 Inch, Galvanized Cast Iron","description":"\u003cp\u003eThe Sea-Dog 5 inch Flat Head Open Base Cleat is a hot dipped galvanized cast iron dock and deck cleat designed for smaller recreational boats and recreational docks. Its open base and flat head design give it a low profile that lies flatter against the mounting surface than a raised-base cleat, making it easy to walk over and less likely to snag lines or feet on deck. The corrosion resistant hot dipped galvanizing protects the cast iron body against the marine environment, holding up to saltwater spray and everyday dock use.\u003c\/p\u003e\u003cp\u003eThis cleat installs with two flat head thru-bolts sized for a #12 fastener (bolts not included), so hardware is countersunk for a clean, snag-free finish. It measures 5 inches overall (A), with a base footprint of 1-5\/16 inches (B) by 1-1\/16 inches (C) and an overall width of 2-3\/16 inches (D), giving a compact profile suited to smaller craft and dock applications. Sea-Dog notes this cleat is not recommended for large boats or commercial applications, so it is best matched to recreational boats and residential dock hardware where a smaller, lighter-duty cleat is appropriate.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040105-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #12 Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Two flat head thru-bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Hot Dipped Galvanized Cast Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.646 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each \/ 10 pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514040037\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRecommended Use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSmaller recreational boats and recreational docks\u003c\/li\u003e\n\u003cli\u003eNot recommended for large boats or commercial applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 040105-1 cleat?\u003c\/strong\u003e The Sea-Dog 040105-1 measures 5 inches overall in length, with a base footprint of 1-5\/16 inches by 1-1\/16 inches and an overall width of 2-3\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e It is made from hot dipped galvanized cast iron, which resists corrosion in marine and dockside environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with the 040105-1 cleat?\u003c\/strong\u003e No. The Sea-Dog 040105-1 installs with two flat head thru-bolts sized for a #12 fastener, but the bolts themselves are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat rated for large boats?\u003c\/strong\u003e No, Sea-Dog states this flat head open base cleat is designed for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'open base' mean for this cleat design?\u003c\/strong\u003e An open base cleat, like the Sea-Dog 040105-1, has an open area beneath the horns rather than a solid base plate, which is the standard low-profile flat head cleat style used on smaller boats and docks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 040105-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog 040105-1 weighs 0.646 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cleats come in a package?\u003c\/strong\u003e The 040105-1 is packed in a standard pack of 10 each or 10 pairs, though individual listings may sell it in smaller quantities.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used on a dock instead of a boat?\u003c\/strong\u003e Yes, Sea-Dog specifies this cleat for use on both smaller recreational craft and recreational docks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener size does the 040105-1 use?\u003c\/strong\u003e This cleat uses a #12 flat head fastener for its two mounting thru-bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cleat have a UPC for retail tracking?\u003c\/strong\u003e Yes, the Sea-Dog 040105-1 5 inch cleat carries UPC 035514040037.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543385819,"sku":"S-D-040105-1","price":7.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3956_ee533315-5bac-433a-a08c-739216ca85e1.jpg?v=1784421620"},{"product_id":"sea-dog-040108-1-flat-head-open-base-cleat-8-hot-dipped-galvanized-cast-iron-dock-cleat","title":"Sea-Dog 040108-1 Flat Head Open Base Cleat, 8 Inch, Galvanized Cast Iron","description":"\u003cp\u003eThe Sea-Dog 040108-1 is an 8 inch Flat Head Open Base Cleat built for securing dock lines on smaller recreational boats and recreational docks. It is cast from corrosion resistant hot dipped galvanized cast iron, giving it long-term resistance to rust and saltwater exposure while keeping a traditional open-base look that lets water drain away rather than pooling under the cleat. The flat head design sits low against the mounting surface, and the open base makes it easy to wrap and cleat off dock lines quickly.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the 040108-1 mounts with two flat head thru-bolts (not included), passing through 5\/16 inch bolt holes for a secure, low-profile fit. Sea-Dog notes this cleat is intended for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications, so it is best suited for runabouts, small cruisers, pontoons, jon boats, and residential dock installations rather than heavy-duty commercial mooring.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040108-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Hot dipped galvanized cast iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Length:\u003c\/strong\u003e 3-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThru-Bolt Hole Diameter:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Two flat head thru-bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.184 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Smaller recreational craft and recreational docks; not recommended for large boats or commercial applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514040051\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 040108-1 cleat made of?\u003c\/strong\u003e The 040108-1 is constructed of corrosion resistant hot dipped galvanized cast iron, which resists rust in saltwater and freshwater dock environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this cleat?\u003c\/strong\u003e The Sea-Dog 040108-1 measures 8 inches overall in length, with a base width of 2-1\/8 inches and a height of 1-11\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size bolts do I need to mount this cleat?\u003c\/strong\u003e The 040108-1 has thru-bolt holes sized at 5\/16 inch and installs with two flat head thru-bolts, which are not included with the cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat rated for large boats or commercial use?\u003c\/strong\u003e No. The Sea-Dog 040108-1 is designed for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'open base' mean for this cleat design?\u003c\/strong\u003e An open base cleat like the 040108-1 has a hollow underside rather than a solid base, which allows water to drain away instead of collecting underneath the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cleat come with mounting hardware?\u003c\/strong\u003e No, the Sea-Dog 040108-1 requires two flat head thru-bolts for installation, and these bolts are not included in the package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 040108-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog 040108-1 weighs 1.184 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'flat head' refer to on this cleat?\u003c\/strong\u003e Flat head describes the low-profile design of the 040108-1, where the cleat sits close to the mounting surface rather than standing up on raised horns or a pedestal base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 040108-1 sold as a single cleat or in a set?\u003c\/strong\u003e The Sea-Dog 040108-1 is sold individually (per each), with a standard case pack of 10 each for retailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat rust over time in saltwater?\u003c\/strong\u003e The 040108-1 is hot dipped galvanized cast iron, a finish specifically chosen for corrosion resistance in marine environments, though like any iron product it should be inspected periodically for wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the base footprint of the 040108-1 cleat?\u003c\/strong\u003e The Sea-Dog 040108-1 has a base length of 3-1\/4 inches, sized to match its 8 inch overall length and 2-1\/8 inch base width.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543451355,"sku":"S-D-040108-1","price":9.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3956_284245e1-17a1-4534-a41d-6e7aad6c75ab.jpg?v=1784421625"},{"product_id":"sea-dog-040106-1-flat-head-open-base-cleat-6-inch-hot-dipped-galvanized-cast-iron-dock-cleat","title":"Sea-Dog 040106-1 Flat Head Open Base Cleat, 6 Inch, Galvanized Cast Iron","description":"\u003cp\u003eThe Sea-Dog 040106-1 is a 6 inch flat head open base cleat built for securing docking and mooring lines on smaller recreational craft and recreational docks. It is constructed of cast iron with a hot dipped galvanized finish that resists corrosion in wet marine environments, giving it a durable silver finish that holds up to repeated line loading and weather exposure. The open base design allows lines to be wrapped and cleated off quickly, while the flat head profile sits low against the mounting surface for a clean, low-profile installation. This cleat installs with two flat head thru-bolts (not included), which pass through the mounting holes sized for 1\/4 inch hardware. It is sold as a single cleat. Sea-Dog specifies this model for use on smaller recreational boats and recreational docks and does not recommend it for large boats or commercial applications, so buyers should size their line loads accordingly. Sea-Dog Line has manufactured marine hardware since 1933 and has received multiple industry awards for quality and efficiency. This part number, 040106-1, corresponds to the 6 inch size within Sea-Dog's flat head open base cleat lineup, which also includes 3-1\/2 inch, 4 inch, 5 inch, 8 inch, 10 inch, 12 inch, and 14 inch versions for different boat and dock sizes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040106-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Length:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Hole Spacing:\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Hole Diameter:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Style:\u003c\/strong\u003e Open Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hot Dipped Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7.88 x 3.88 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.878 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Two flat head thru-bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Smaller recreational boats and recreational docks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514040044\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 040106-1 cleat?\u003c\/strong\u003e The Sea-Dog 040106-1 is 6 inches in overall length, with a base length of 1-1\/4 inches and a bolt hole spacing of 2-3\/16 inches, making it one of the mid-size options in Sea-Dog's flat head open base cleat lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this cleat made of?\u003c\/strong\u003e It is made of cast iron with a hot dipped galvanized finish, which gives the 040106-1 corrosion resistance for use in wet marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 040106-1 cleat come with mounting bolts?\u003c\/strong\u003e No, the Sea-Dog 040106-1 installs with two flat head thru-bolts sized for its 1\/4 inch bolt holes, but the bolts themselves are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat rated for large boats or commercial use?\u003c\/strong\u003e No. Sea-Dog specifies the 040106-1 flat head open base cleat for use on smaller recreational craft and recreational docks, and it is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 040106-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog 040106-1 flat head open base cleat weighs 0.878 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'open base' mean on this cleat?\u003c\/strong\u003e An open base cleat has a gap beneath the horns rather than a solid base plate, which is the design used on the Sea-Dog 040106-1 and lets dock lines be wrapped and cleated off quickly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does this cleat have?\u003c\/strong\u003e The 040106-1 has a silver, hot dipped galvanized finish over its cast iron construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 040106-1 sold as a single cleat or a pair?\u003c\/strong\u003e It is sold as a single cleat; the Sea-Dog 040106-1 is not packaged as a matched pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size bolts does the 040106-1 cleat need?\u003c\/strong\u003e The mounting holes on the Sea-Dog 040106-1 are sized for 1\/4 inch flat head thru-bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this cleat's packaging or footprint?\u003c\/strong\u003e The Sea-Dog 040106-1 measures 7.88 x 3.88 x 1.5 inches overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other sizes of this same cleat available?\u003c\/strong\u003e Yes, Sea-Dog makes this flat head open base cleat in several other lengths, including 3-1\/2 inch, 4 inch, 5 inch, 8 inch, 10 inch, 12 inch, and 14 inch versions, each under its own part number; the 040106-1 is the 6 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes the 040106-1 cleat and how long has the company been in business?\u003c\/strong\u003e The 040106-1 is made by Sea-Dog Line, a family-owned marine hardware manufacturer that has been in business since 1933.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543484123,"sku":"S-D-040106-1","price":7.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3956_19b9baa7-d8c9-4ffb-a3ff-98aa5a6a8e1e.jpg?v=1784421626"},{"product_id":"sea-dog-040112-flat-head-open-base-cleat-12-in-hot-dipped-galvanized-cast-iron-dock-cleat","title":"Sea-Dog Flat Head Open Base Cleat, 12 Inch, Hot-Dipped Galvanized Cast Iron","description":"\u003cp\u003eThe Sea-Dog 040112 is a 12 inch flat head open base cleat built for securing dock lines on smaller recreational craft and recreational docks. It is cast from corrosion resistant hot dipped galvanized cast iron, giving it a durable finish that stands up to marine environments while keeping the classic open base cleat profile that lets lines run cleanly across the horns. The flat head design sits low and installs flush using two flat head thru-bolts (not included), which pass through the mounting holes for a secure, low-profile hold on the deck or dock surface. This cleat is intended for smaller recreational boats and recreational docks and is not recommended for large boats or commercial applications. Each unit measures 12 inches overall and is packed 5 to a standard pack. With its galvanized finish and cast iron construction, the Sea-Dog 040112 offers a reliable, corrosion resistant mounting point for dock lines, fender lines, and general tie-off duty on smaller vessels and dock structures.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e 3\/8 inch flat head thru-bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Style:\u003c\/strong\u003e Open Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hot-dipped galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514040129\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Smaller recreational boats and recreational docks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Recommended For:\u003c\/strong\u003e Large boats or commercial applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 040112 cleat?\u003c\/strong\u003e The Sea-Dog 040112 is a 12 inch open base cleat, measured overall length from horn to horn.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 040112 cleat made of?\u003c\/strong\u003e It is cast from corrosion resistant hot dipped galvanized cast iron, which gives the Sea-Dog 040112 its durable, weather resistant finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 040112 cleat come with mounting bolts?\u003c\/strong\u003e No, the Sea-Dog 040112 installs with two flat head thru-bolts sized 3\/8 inch, but the bolts themselves are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat rated for large boats?\u003c\/strong\u003e No. The 040112 flat head open base cleat is designed for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat head style is the 040112 cleat?\u003c\/strong\u003e It uses a flat head design, meaning the mounting holes are countersunk so the thru-bolts sit flush with the cleat base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is an open base cleat?\u003c\/strong\u003e An open base cleat, like the Sea-Dog 040112, has a base with a gap beneath the horns rather than a solid closed base, allowing lines to be led underneath as well as around the horns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cleats come in a package?\u003c\/strong\u003e The Sea-Dog 040112 is packed 5 to a standard pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 040112 cleat weigh?\u003c\/strong\u003e The Sea-Dog 040112 weighs 3.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat rust over time?\u003c\/strong\u003e The hot dipped galvanized finish on the Sea-Dog 040112 is corrosion resistant, which helps protect the cast iron base from rust in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 040112 cleat?\u003c\/strong\u003e The UPC for the Sea-Dog 040112 flat head open base cleat is 035514040129.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 040112 cleat be used on a dock?\u003c\/strong\u003e Yes, the Sea-Dog 040112 is intended for use on recreational docks as well as smaller recreational boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 040112 cleat different from the smaller sizes in the line?\u003c\/strong\u003e The 040112 is the 12 inch version in Sea-Dog's flat head open base cleat range, which also includes 6, 8, 10, and 14 inch sizes with correspondingly larger dimensions and thru-bolt sizes as the cleat length increases.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543516891,"sku":"S-D-040112","price":16.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3956_9a014dc6-07eb-4a18-8a55-f480373d417f.jpg?v=1784421636"},{"product_id":"sea-dog-041404-1-folding-stud-mount-cleat-4-1-2-in-investment-cast-316-stainless-steel","title":"Sea-Dog Folding Stud Mount Cleat 041404-1, 4-1\/2 Inch, 316 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog Folding Stud Mount Cleat (041404-1) is a highly polished investment cast 316 stainless steel cleat designed to lock down flat against the deck when not in use and flip back up when it is time to tie off. This folding action keeps the deck clear of a permanently upright cleat that could snag lines, sails, or feet when the boat is underway or at rest.\u003c\/p\u003e\u003cp\u003eThe cleat uses a surface mount, stud mount design, so no drain tubes or receptacles are required to prevent leaks into the deck below. Installation is straightforward: two standard bit size holes are drilled for the mounting studs, eliminating the need for cutouts or hole saws. The stud mounted fasteners are hidden beneath the deck surface, giving the topside an attractive, flush appearance with no visible bolt heads.\u003c\/p\u003e\u003cp\u003eConstructed of corrosion resistant investment cast 316 stainless steel and finished with a high polish, this cleat is built to stand up to a marine environment while maintaining a clean, finished look. It is sized for 4-1\/2 inch base applications and secures with a 1\/4 inch-20 NC threaded fastener.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041404-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Folding Stud Mount Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface Mount \/ Stud Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 6-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 4-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension F:\u003c\/strong\u003e 2-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 1\/4 inch-20 NC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.81 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 10 x 5.81 x 2.38 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041607\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 041404-1 cleat made of?\u003c\/strong\u003e The Sea-Dog 041404-1 Folding Stud Mount Cleat is made of investment cast 316 stainless steel with a highly polished finish, giving it strong corrosion resistance for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cleat fold down when not in use?\u003c\/strong\u003e Yes, the 041404-1 folding cleat locks down flat against the deck when not needed and flips back up when it is time to tie off a line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog folding cleat mounted?\u003c\/strong\u003e It is a surface mount, stud mount cleat installed through two standard bit size holes drilled for the studs, so no cutouts or hole saws are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre drain tubes or receptacles needed to install this cleat?\u003c\/strong\u003e No. Because the 041404-1 is a surface mount cleat, no drain tubes or receptacles are required to prevent leaks at the mounting holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the mounting hardware be visible after installation?\u003c\/strong\u003e No, the stud mounted fasteners on the Sea-Dog 041404-1 cleat are hidden beneath the deck, leaving a clean, flush appearance on top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size cleat is the 041404-1?\u003c\/strong\u003e The 041404-1 measures 6-7\/16 inches (dimension A) by 4-1\/2 inches (dimension B), with a height of 2-1\/8 inches (dimension C).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener size does this cleat use?\u003c\/strong\u003e The Sea-Dog 041404-1 folding cleat uses a 1\/4 inch-20 NC threaded stud fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cleat weigh?\u003c\/strong\u003e The Sea-Dog Folding Stud Mount Cleat 041404-1 weighs 0.81 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat resistant to corrosion in saltwater?\u003c\/strong\u003e Yes, it is constructed of investment cast 316 stainless steel, which is corrosion resistant and suited to marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 041404-1 come in different sizes?\u003c\/strong\u003e The 041404-1 is the 4-1\/2 inch (dimension B) size in Sea-Dog's folding stud mount cleat line, which also includes larger cleats using 5\/16 inch-18 NC and 3\/8 inch-16 NC fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Sea-Dog 041404-1 cleat have?\u003c\/strong\u003e It has a highly polished finish over the investment cast 316 stainless steel body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sea-Dog 041404-1 cleat?\u003c\/strong\u003e Each Sea-Dog 041404-1 Folding Stud Mount Cleat is a single cleat unit with its stud mount fasteners.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543615195,"sku":"S-D-041404-1","price":51.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7463.jpg?v=1784421665"},{"product_id":"sea-dog-040110-flat-head-open-base-dock-cleat-10-in-hot-dipped-galvanized-cast-iron","title":"Sea-Dog Flat Head Open Base Cleat 040110, 10 Inch, Galvanized Cast Iron","description":"\u003cp\u003eThe Sea-Dog 040110 is a 10 inch flat head open base cleat built for securing dock lines and mooring lines on smaller recreational boats and recreational docks. It is constructed of corrosion resistant hot dipped galvanized cast iron, giving it the strength of cast iron with a protective galvanized finish that resists rust and corrosion in wet marine environments. The open base design allows lines to be wrapped and cleated off quickly, while the low-profile flat head shape keeps the cleat from becoming a snag point on deck or dock surfaces.\u003c\/p\u003e\u003cp\u003eThis cleat installs with two flat head thru-bolts (not included), which pass through the base and seat flush for a clean, secure mount. At 10 inches overall length, the 040110 sits in the middle of Sea-Dog's flat head open base cleat lineup, sized for boats and dock applications that need more holding capacity than the smaller 5, 6, and 8 inch versions but do not require the largest 12 or 14 inch sizes. Sea-Dog notes this cleat is intended for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Cast Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hot Dipped Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Style:\u003c\/strong\u003e Open Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Length:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width:\u003c\/strong\u003e 2-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height:\u003c\/strong\u003e 4-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Hole Diameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Installs with two flat head thru-bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514040112\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 040110 cleat?\u003c\/strong\u003e The 040110 measures 10 inches in overall length, with a base of 2-1\/2 inches by 2-3\/8 inches and an overall height of 4-1\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 040110 cleat made of?\u003c\/strong\u003e It is made of hot dipped galvanized cast iron, which combines the strength of cast iron with a galvanized finish that resists rust and corrosion in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 040110 come with mounting bolts?\u003c\/strong\u003e No, the 040110 installs with two flat head thru-bolts, and the bolts are not included with the cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size bolts does this cleat use?\u003c\/strong\u003e The 040110 has a bolt hole diameter of 3\/8 inch for its two flat head thru-bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 10 inch Sea-Dog cleat weigh?\u003c\/strong\u003e The Sea-Dog 040110 flat head open base cleat weighs 2.13 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 040110 cleat suitable for large boats?\u003c\/strong\u003e No, Sea-Dog states this flat head open base cleat is intended for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is an open base cleat used for?\u003c\/strong\u003e An open base cleat like the 040110 is used to secure dock lines and mooring lines, with an open design under the horns that makes it easy to wrap and cleat off a line quickly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a flat head cleat instead of a horn cleat with a raised base?\u003c\/strong\u003e The flat head design of the 040110 keeps the cleat low profile against the mounting surface, reducing the chance of the base catching lines or gear on deck or dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many 040110 cleats come in a package?\u003c\/strong\u003e The Sea-Dog 040110 has a standard pack quantity of 10 each and is also sold individually per each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 040110 different from the smaller Sea-Dog flat head cleats?\u003c\/strong\u003e Yes, the 040110 is the 10 inch size in Sea-Dog's flat head open base cleat line, which also includes 5, 6, 8, 12, and 14 inch versions with correspondingly different base dimensions and weights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Sea-Dog 040110 be used outdoors in saltwater environments?\u003c\/strong\u003e Yes, the hot dipped galvanized finish on the 040110 is corrosion resistant, making it suitable for exposed marine and dock environments.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543647963,"sku":"S-D-040110","price":11.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3956_46f665b8-cbeb-4cee-b5e8-bf38fc2d7873.jpg?v=1784421668"},{"product_id":"sea-dog-041604-1-open-base-cleat-4-inch-investment-cast-316-stainless-steel","title":"Sea-Dog 041604-1 Open Base Cleat, 4 Inch, 316 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog 041604-1 is a 4 inch open base cleat built for reliable line tie-off on deck, dock, or hull. It is investment cast from 316 stainless steel, a grade chosen for its resistance to corrosion in saltwater and marine environments, so the cleat holds its finish and strength through repeated exposure to spray and sun. The open base, classic horn design gives boaters a simple, low-profile fitting for securing dock lines, fenders, and rigging. It installs with four flathead thru-bolts sized for #10 fasteners (fasteners are sold separately). Sold individually, this 4 inch size is one of a full range of Sea-Dog open base cleats, so boat owners can match cleat size to line diameter and deck space across the vessel. The gray stainless finish suits both classic and modern boat styling.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041604-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 15\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen Base Width (C):\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 flathead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.22 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface mount, open base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each (sold individually)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041072\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal mounting cleat; not model or engine specific.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers apply to this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 041604-1 cleat?\u003c\/strong\u003e The 041604-1 is the 4 inch open base cleat, measuring 4 inches overall in length with a 1-3\/4 inch open base width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e It is investment cast from 316 stainless steel, a corrosion-resistant grade suited to saltwater and marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install the 041604-1 cleat?\u003c\/strong\u003e Installation uses four flathead thru-bolts sized for #10 fasteners; the fasteners are not included with the cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 041604-1 an open base or closed base cleat?\u003c\/strong\u003e This is an open base cleat, with an open base width of 1-3\/4 inches, giving a classic tie-off style rather than a solid base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 4 inch Sea-Dog cleat weigh?\u003c\/strong\u003e The Sea-Dog 041604-1 weighs 0.22 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 041604-1 come with mounting hardware?\u003c\/strong\u003e No, the four #10 flathead thru-bolts required for mounting are sold separately from the 041604-1 cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat sold individually or in a set?\u003c\/strong\u003e The 041604-1 is sold individually, one cleat per unit, though it is packed in standard quantities of 10 for bulk distribution.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does the 041604-1 have?\u003c\/strong\u003e This cleat has a gray stainless steel finish, consistent with its 316 stainless construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other sizes are available besides the 4 inch open base cleat?\u003c\/strong\u003e The 041604-1 is the 4 inch version of Sea-Dog's open base cleat line, which also includes 5, 6, 8, 10, and 12 inch sizes in the same 316 stainless construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill 316 stainless steel resist rust on this cleat?\u003c\/strong\u003e Yes, the 041604-1 is investment cast from 316 stainless steel specifically for corrosion resistance in marine and saltwater conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 041604-1 suitable for both deck and dock mounting?\u003c\/strong\u003e Yes, this open base cleat is a general-purpose surface-mount fitting suitable for deck, dock, or hull installation wherever line tie-off is needed.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543680731,"sku":"S-D-041604-1","price":21.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3964.jpg?v=1784421670"},{"product_id":"sea-dog-041426-pull-up-cleat-6-1-4-flush-mount-investment-cast-316-stainless-steel-boat-cleat-with-hidden-studs","title":"Sea-Dog Pull-Up Cleat, 5-3\/4 Inch, 316 Stainless Steel Flush Mount Deck Cleat with Studs","description":"\u003cp\u003eThis Sea-Dog Pull-Up Cleat is a flush-mount deck cleat that recesses into the deck surface for a clean, contemporary look when not in use. It is investment cast from 316 stainless steel, giving it strong corrosion resistance for marine environments. The cleat uses stud-mounted fasteners that are hidden from view once installed, so there is no visible hardware on the deck surface. The mounting studs are sized to accept an optional drain fitting, allowing water that collects in the recessed cleat pocket to drain down to the bilge instead of pooling on deck.\u003c\/p\u003e\u003cp\u003eThis is the 5-3\/4 inch bulk-pack version of the cleat (part number 041426). A matching backing plate and drain fitting are available as separate accessories for this cleat size. Bulk-pack cleats do not include the backing plate; that plate is only bundled with the display-packaged version of this cleat line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041426\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment cast 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Pull-up flush deck cleat with hidden stud mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 6-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 5-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 7\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension F:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.75 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack Quantity:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041515\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Backing Plate:\u003c\/strong\u003e 041486 (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Drain Fitting:\u003c\/strong\u003e 041596 (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this Sea-Dog pull-up cleat?\u003c\/strong\u003e The Sea-Dog Pull-Up Cleat, part number 041426, measures 6-1\/4 inches by 5-3\/4 inches overall, with a height of 1-3\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 041426 cleat made from?\u003c\/strong\u003e It is investment cast from 316 stainless steel, a marine-grade alloy chosen for its corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cleat sit flush with the deck?\u003c\/strong\u003e Yes, this is a pull-up style cleat designed to recess flush into the deck when not in use, giving a clean, uncluttered deck surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the mounting fasteners visible on the 041426 cleat?\u003c\/strong\u003e No, part number 041426 uses stud-mounted fasteners that are hidden once the cleat is installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 041426 cleat include a backing plate?\u003c\/strong\u003e No, this bulk-pack version of the cleat does not include a backing plate. The matching backing plate for this cleat size is part number 041486 and is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan water drain out of this cleat pocket?\u003c\/strong\u003e Yes, the studs on the 041426 cleat will accept an optional drain fitting (part number 041596, sold separately) that lets water drain down to the bilge instead of collecting in the recess.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 041426 pull-up cleat weigh?\u003c\/strong\u003e The Sea-Dog Pull-Up Cleat 041426 weighs 1.75 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the stud diameter on this cleat?\u003c\/strong\u003e Dimension D on the 041426 cleat, corresponding to the stud size, is 7\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this cleat and Sea-Dog part 041424?\u003c\/strong\u003e Part 041426 is the 5-3\/4 inch size in Sea-Dog's pull-up cleat lineup, while 041424 is a smaller 4-1\/2 inch version; both share the same investment cast 316 stainless steel construction and hidden stud mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat sold individually or in bulk?\u003c\/strong\u003e Part number 041426 is packaged as a bulk item with a standard pack quantity of 10 each, and it does not include the backing plate that comes with the display-packaged version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the correct backing plate for the Sea-Dog 041426 cleat?\u003c\/strong\u003e The correct backing plate for the 5-3\/4 inch Sea-Dog Pull-Up Cleat (041426) is part number 041486, sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an original Sea-Dog part?\u003c\/strong\u003e Yes, part number 041426 is the genuine Sea-Dog manufacturer part number for the 5-3\/4 inch stainless steel pull-up cleat.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543713499,"sku":"S-D-041426","price":78.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7464.jpg?v=1784421674"},{"product_id":"sea-dog-041606-1-open-base-cleat-6-inch-investment-cast-316-stainless-steel-universal-deck-mount","title":"Sea-Dog 041606-1 Open Base Cleat, 6 Inch, Investment Cast 316 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog 041606-1 is a 6 inch open base cleat built for easy line tie-off on deck, dock, or dinghy. It is investment cast from 316 stainless steel, a grade chosen for its resistance to saltwater corrosion, so the cleat holds its finish and structural integrity in a marine environment far better than plated steel or lower-grade alloys. The open base design gives quick access for wrapping and releasing dock lines, and the classic profile suits traditional boat and dock hardware layouts.\u003c\/p\u003e\u003cp\u003eThis cleat has a 6 inch overall length and a 2-1\/4 inch base width. It installs with four 1\/4 inch flat head thru-bolts (bolts are not included), so plan to have matching hardware and backing on hand for a secure through-deck installation. At 0.378 pounds, it is a compact, easy-to-handle piece of hardware suited to a wide range of boats and dock setups.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041606-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 1\/4 inch flat head thru-bolt (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Required:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.378 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041034\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Open base, four-hole thru-bolt\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Sea-Dog 041606-1 cleat?\u003c\/strong\u003e It has a 6 inch overall length, matching the 041606-1 designation in the Sea-Dog open base cleat lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 041606-1 cleat made from?\u003c\/strong\u003e Investment cast 316 stainless steel, chosen for corrosion resistance in saltwater and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow wide is the base of this cleat?\u003c\/strong\u003e The base width is 2-1\/4 inches on the Sea-Dog 041606-1 open base cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware do I need to install this cleat?\u003c\/strong\u003e Four 1\/4 inch flat head thru-bolts are required to mount the 041606-1; the bolts are not included and must be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 041606-1 come with mounting bolts?\u003c\/strong\u003e No, mounting bolts are not included with this cleat, only the cleat itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cleat weigh?\u003c\/strong\u003e The Sea-Dog 041606-1 open base cleat weighs 0.378 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat hold up in saltwater?\u003c\/strong\u003e Yes, because it is investment cast from 316 stainless steel, a grade selected specifically for resistance to saltwater corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 041606-1 open base cleat and the Sea-Dog Smart Cleat?\u003c\/strong\u003e The 041606-1 is a standard open base cleat with no knob feature. Sea-Dog also offers the Smart Cleat (041636-1), a 6-1\/4 inch open base cleat cast from the same 316 stainless steel but with a knob end that helps keep lines from slipping off; buyers who want that added line retention should choose that part instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 041606-1 cleat sold individually?\u003c\/strong\u003e Yes, the Sea-Dog 041606-1 open base cleat is sold per each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cleat have an open or closed base?\u003c\/strong\u003e The 041606-1 uses an open base design that installs with four thru-bolts, allowing easy line tie-off around the base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 041606-1 cleat?\u003c\/strong\u003e The UPC for this cleat is 035514041034.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 041606-1 cleat still in production?\u003c\/strong\u003e Yes, this part number is an active, non-discontinued item in the Sea-Dog cleat lineup.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543844571,"sku":"S-D-041606-1","price":23.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3964_f09a6e4b-2fe3-4021-aad9-3fa6cf48202e.jpg?v=1784421712"},{"product_id":"sea-dog-041608-1-open-base-cleat-8-in-investment-cast-316-stainless-steel","title":"Sea-Dog Open Base Cleat, 8 Inch, 316 Stainless Steel, Part 041608-1","description":"\u003cp\u003eThe Sea-Dog Open Base Cleat (part 041608-1) is an 8 inch line tie-off cleat built for corrosion resistance and long-term durability in marine environments. It is constructed of investment cast 316 stainless steel, a grade chosen specifically for its resistance to saltwater corrosion, making it suitable for use on deck, dock, or hull surfaces exposed to constant moisture and salt spray.\u003c\/p\u003e\u003cp\u003eThis cleat uses a classic open base design for easy line tie-off and a traditional look on deck. It installs with four 1\/4 inch flat head thru-bolts (not included), which pass through the open base for a secure, flush mount. The cleat measures 8 inches along its primary dimension, with additional catalog dimensions of 1-1\/2 inches, 2-13\/16 inches, and 1-3\/8 inches, and weighs 0.668 pounds.\u003c\/p\u003e\u003cp\u003eThis 8 inch size is one of several sizes offered in the Sea-Dog Open Base Cleat line, so buyers should confirm the 8 inch length and part number 041608-1 match their intended mounting location before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041608-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-13\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 1\/4 inch Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Four flat head thru-bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.668 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041027\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 041608-1 cleat?\u003c\/strong\u003e The 041608-1 is the 8 inch size in the Sea-Dog Open Base Cleat lineup, with an overall length of 8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e It is made of investment cast 316 stainless steel, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 041608-1 cleat include mounting hardware?\u003c\/strong\u003e No, thru-bolts are not included. The cleat installs with four 1\/4 inch flat head thru-bolts that must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounting bolts does this cleat need?\u003c\/strong\u003e Four flat head thru-bolts are required to install the 041608-1 open base cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the base style of this cleat?\u003c\/strong\u003e The 041608-1 uses an open base design, which allows the four mounting bolts to pass through the open area of the base for a secure, flush installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 8 inch Sea-Dog cleat weigh?\u003c\/strong\u003e The Sea-Dog 041608-1 weighs 0.668 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 316 stainless steel resistant to rust in saltwater?\u003c\/strong\u003e Yes, 316 stainless steel is a marine-grade alloy specifically formulated for corrosion resistance in saltwater, which is why it is used for the 041608-1 open base cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 041608-1 cleat besides its 8 inch length?\u003c\/strong\u003e Beyond the 8 inch overall length, the cleat has catalog dimensions of 1-1\/2 inches, 2-13\/16 inches, and 1-3\/8 inches, and uses a 1\/4 inch flat head fastener size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this cleat used for?\u003c\/strong\u003e The 041608-1 open base cleat is used for tying off dock lines and other lines on a boat deck or dock in a classic open base style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre other sizes of this Sea-Dog cleat available?\u003c\/strong\u003e Yes, the Open Base Cleat design is offered in multiple lengths; the 041608-1 is specifically the 8 inch version, so buyers should confirm this length matches their needs before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 041608-1 a cast or stamped cleat?\u003c\/strong\u003e It is investment cast, not stamped, which is part of how the 041608-1 achieves its corrosion resistant, classic cleat shape.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543910107,"sku":"S-D-041608-1","price":44.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3964_1164f68c-3792-4a72-adf5-74e4921ec956.jpg?v=1784421718"},{"product_id":"sea-dog-041610-1-open-base-cleat-10-in-316-stainless-steel-marine-dock-cleat","title":"Sea-Dog Open Base Cleat, 10 Inch, Investment Cast 316 Stainless Steel, Part 041610-1","description":"\u003cp\u003eThe Sea-Dog Open Base Cleat (part number 041610-1) is a 10 inch line tie-off cleat built for boaters who want dependable corrosion resistance in a classic, unadorned horn shape. It is investment cast from 316 stainless steel, the marine-grade alloy chosen for its resistance to salt water corrosion, so it holds up to repeated exposure at the dock or underway without pitting or staining like lower grades of stainless. The open base design is a traditional cleat profile, offering a straightforward, low-profile mounting footprint that works well anywhere a reliable tie-off point is needed on deck, at the bow, or along a dock.\u003c\/p\u003e\u003cp\u003eThis cleat installs with four 5\/16 inch flat head thru-bolts (fasteners are not included, so plan to source your own hardware sized to your mounting surface thickness). At 10 inches long with a 1-7\/8 inch width, 3-5\/8 inch height, and 1-3\/4 inch base dimension, it is sized for mid-size lines and general-purpose docking and mooring duty. Because it is cast rather than stamped, the cleat resists bending and flexing under load, giving it a longer service life than lighter-weight fittings.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041610-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth (B):\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight (C):\u003c\/strong\u003e 3-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimension (D):\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 5\/16 inch flat head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Four thru-bolt mounting points (fasteners not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.184 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041041\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal deck and dock cleat and is not restricted to a specific boat make, model, or engine; it mounts anywhere a 10 inch open base cleat is appropriate.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 041610-1 cleat?\u003c\/strong\u003e The 041610-1 open base cleat is 10 inches long overall, 1-7\/8 inches wide, 3-5\/8 inches high, with a 1-3\/4 inch base dimension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e It is investment cast from 316 stainless steel, a marine-grade alloy chosen for corrosion resistance in salt water environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 041610-1 cleat come with mounting hardware?\u003c\/strong\u003e No, the Sea-Dog 041610-1 installs with four 5\/16 inch flat head thru-bolts, but the fasteners themselves are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounting bolts does this cleat need?\u003c\/strong\u003e The 041610-1 open base cleat mounts with four thru-bolts, each sized 5\/16 inch flat head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 316 stainless steel better than 304 for boat cleats?\u003c\/strong\u003e 316 stainless steel, which the Sea-Dog 041610-1 is made from, contains molybdenum that gives it stronger resistance to salt water corrosion and pitting than 304 stainless, making it a preferred choice for marine hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this cleat and the Sea-Dog Smart Cleat?\u003c\/strong\u003e The 041610-1 is an open base cleat with a classic straight-horn design, while the Sea-Dog Smart Cleat has a knob end that helps prevent lines from slipping off; both are cast from 316 stainless steel but the Smart Cleat is a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat fit any boat?\u003c\/strong\u003e The Sea-Dog 041610-1 is a universal 10 inch open base cleat, not restricted to a particular boat make or model, and can be mounted anywhere a cleat of this size and bolt pattern is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 041610-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog open base cleat, part 041610-1, weighs 1.184 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat cast or stamped?\u003c\/strong\u003e The 041610-1 is investment cast, not stamped, which gives it more resistance to bending and flexing under load than lighter stamped fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this cleat?\u003c\/strong\u003e The package includes the Sea-Dog 041610-1 open base cleat itself; the four 5\/16 inch flat head thru-bolts needed for mounting are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 041610-1 genuine Sea-Dog hardware?\u003c\/strong\u003e Yes, part number 041610-1 is a genuine Sea-Dog manufactured cleat, not a generic aftermarket copy.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543942875,"sku":"S-D-041610-1","price":61.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3964_effeead3-4c4d-4feb-a06c-84cb7ac90e0b.jpg?v=1784421721"},{"product_id":"sea-dog-041605-1-open-base-cleat-5-inch-316-stainless-steel-boat-dock-cleat","title":"Sea-Dog Open Base Cleat, 5 Inch, 316 Stainless Steel, Model 041605-1","description":"\u003cp\u003eThe Sea-Dog Open Base Cleat (041605-1) is a 5 inch investment cast 316 stainless steel cleat built for secure line tie-off on deck, dock, or hull. Investment casting produces a dense, uniform structure with a smooth, consistent finish, and 316 stainless steel gives the cleat strong resistance to saltwater corrosion, making it suited to long-term marine exposure. The classic open-base horn design lets dock lines, fenders, and mooring lines be tied off quickly and released just as easily, and it mounts to a flat deck or gunwale surface using four flat head thru-bolts (fasteners not included).\u003c\/p\u003e\u003cp\u003eThis cleat is sized at 5 inches overall, with a base footprint and horn height proportioned for that size class in the Sea-Dog open base cleat line, which also includes 4 inch, 6 inch, 8 inch, 10 inch, and 12 inch versions sharing the same investment cast 316 stainless steel construction and open-base, four-bolt mounting pattern. Because it uses standard thru-bolt mounting rather than a proprietary bracket, it is straightforward to install as an upgrade or direct replacement on boats, docks, and other structures that use a comparably sized open base cleat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041605-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (Overall Length):\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #10 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Open Base, Four-Bolt Thru-Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.294 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041089\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 041605-1 cleat?\u003c\/strong\u003e The Sea-Dog 041605-1 is a 5 inch open base cleat, measuring 5 inches in overall length (dimension A), with a base and horn profile of 1-1\/8 inches (B), 2-1\/8 inches (C), and 1 inch (D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made of?\u003c\/strong\u003e This cleat is investment cast from 316 stainless steel, a grade chosen for its resistance to saltwater corrosion in marine hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Sea-Dog 041605-1 mount?\u003c\/strong\u003e It mounts with an open base design using four #10 flat head thru-bolts; the fasteners are not included with the cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cleat weigh?\u003c\/strong\u003e The Sea-Dog 041605-1 open base cleat weighs 0.294 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat suitable for saltwater use?\u003c\/strong\u003e Yes. Because it is investment cast 316 stainless steel, the 041605-1 cleat is built to resist corrosion in saltwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Sea-Dog 5 inch open base cleat, part number 041605-1, has UPC 035514041089.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cleat come with mounting hardware?\u003c\/strong\u003e No, the four #10 flat head thru-bolts needed to mount the 041605-1 cleat are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other sizes does this cleat come in?\u003c\/strong\u003e The Sea-Dog open base cleat design is also offered in 4 inch, 6 inch, 8 inch, 10 inch, and 12 inch sizes, each built from the same investment cast 316 stainless steel with the same open-base, four-bolt mounting style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this open base cleat and the Sea-Dog Smart Cleat?\u003c\/strong\u003e The 041605-1 open base cleat has a plain classic horn shape, while the Sea-Dog Smart Cleat adds a knob end on the horn to help prevent lines from slipping off; both are investment cast 316 stainless steel and mount with an open base four-bolt pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used for both dock lines and fenders?\u003c\/strong\u003e Yes, the open horn design of the 041605-1 cleat is intended for general line tie-off, including dock lines, mooring lines, and fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the finish on this cleat polished?\u003c\/strong\u003e The 041605-1 cleat is produced by investment casting, which yields a smooth, uniform stainless steel surface finish.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543975643,"sku":"S-D-041605-1","price":26.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3964_a59dffdd-3618-417d-909c-fa4b2f1fb952.jpg?v=1784421736"},{"product_id":"sea-dog-041666-1-smart-cleat-6-1-4-stud-mount-investment-cast-316-stainless-steel","title":"Sea-Dog Smart Cleat 6-1\/4 Inch Stud Mount 316 Stainless Steel Boat Cleat","description":"\u003cp\u003eThe Sea-Dog Smart Cleat (part number 041666-1) is a stud mount cleat built for clean, secure line tie-off on boats, docks, and marine hardware installations. Constructed of investment cast 316 stainless steel, it resists corrosion from saltwater and marine exposure while holding its polished finish over time. The knob-end design keeps lines from slipping off the horns, reducing the risk of lines working loose and minimizing the potential for collision injuries when moving around deck.\u003c\/p\u003e\u003cp\u003eUnlike traditional through-bolt cleats, the Smart Cleat uses hidden stud mount fasteners, so there are no exposed nuts or bolts on the mounting surface to collect water, dirt, or debris. Installation only requires two standard-size bit holes drilled for the studs, with no cutouts or hole saws needed, making it a straightforward upgrade or replacement for an existing cleat base. The studs measure 1\/4 inch by 1-1\/2 inches with 1\/4-20 NC threads, and the cleat ships complete with stainless steel washers and nuts for a full, ready-to-install package.\u003c\/p\u003e\u003cp\u003eAt 6-1\/4 inches long, this cleat suits a wide range of cleating applications where a compact, classic-style tie-off point is needed. Its investment cast construction gives it a solid, one-piece feel that stands up to repeated line loading over years of use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041666-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Stud Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 6-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-9\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 1\/4 inch x 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Thread:\u003c\/strong\u003e 1\/4-20 NC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.62 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041768\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Stainless steel washers and nuts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 041666-1 Smart Cleat made of?\u003c\/strong\u003e It is made of investment cast 316 stainless steel, which resists corrosion in saltwater and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog Smart Cleat 041666-1 mounted?\u003c\/strong\u003e This cleat uses a stud mount design with hidden fasteners. Two standard-size bit holes are drilled for the 1\/4 inch by 1-1\/2 inch studs, and no cutouts or hole saws are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 041666-1 cleat come with mounting hardware?\u003c\/strong\u003e Yes, the Sea-Dog Smart Cleat 041666-1 includes stainless steel washers and nuts along with the studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog Smart Cleat 041666-1?\u003c\/strong\u003e The overall length is 6-1\/4 inches, with a base width of 2 inches and a height dimension of 1-9\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size are the mounting studs on this cleat?\u003c\/strong\u003e The studs are 1\/4 inch by 1-1\/2 inches with 1\/4-20 NC threads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 041666-1 cleat weigh?\u003c\/strong\u003e It weighs 0.62 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are there no visible bolts on top of this cleat?\u003c\/strong\u003e The Sea-Dog Smart Cleat 041666-1 uses a stud mount system where the fasteners are hidden beneath the mounting surface, so there are no exposed nuts or bolts on top to collect water or debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Stud Mount Smart Cleat (041666-1) and a standard stud mount cleat?\u003c\/strong\u003e The 041666-1 Smart Cleat has a knob end that helps prevent lines from slipping off and reduces the chance of collision injuries, a feature not described on Sea-Dog's standard stud mount cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 041666-1 cleat genuine Sea-Dog hardware?\u003c\/strong\u003e Yes, it is a genuine Sea-Dog product identified by part number 041666-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat rust or corrode over time?\u003c\/strong\u003e The investment cast 316 stainless steel construction of the 041666-1 cleat is corrosion resistant, making it suitable for ongoing marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the Sea-Dog Smart Cleat 041666-1?\u003c\/strong\u003e Each unit includes the cast 316 stainless steel cleat body along with its mounting studs, stainless steel washers, and nuts.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544008411,"sku":"S-D-041666-1","price":44.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7315.jpg?v=1784421748"},{"product_id":"sea-dog-043040-1-open-base-cleat-4-inch-black-injection-molded-nylon-dock-cleat","title":"Sea-Dog Open Base Cleat, 4 Inch Black Nylon Boat Cleat with #8 Fastener Holes","description":"\u003cp\u003eThe Sea-Dog Open Base Cleat (043040-1) is a 4 inch black nylon dock cleat designed for securing dock lines, mooring lines, and fenders on boats and docks. It is built from injection molded nylon that resists corrosion and UV degradation, making it suitable for long-term exposure to sun, saltwater, and freshwater environments. The defining feature of this cleat is its open base with a molded-in recess that traps sealant in place during installation, creating a more watertight seal around the mounting fasteners and helping prevent water intrusion into the deck or hull core.\u003c\/p\u003e\u003cp\u003eThis cleat measures 4 inches in overall length with a height of 7\/8 inch, giving it a compact footprint suitable for smaller boats, docks, kayaks, canoes, and utility applications where a full-size bow or stern cleat is not needed. It installs using two flat head fasteners sized for a #8 screw (fasteners are not included and must be purchased separately). The cleat is finished in black to blend with dark trim, rails, and non-skid surfaces. It ships as a single cleat, and Sea-Dog also offers this same open base cleat design in additional sizes for larger line diameters and heavier-duty applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 043040-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #8 Flat Head (fasteners not included, 2 required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.088 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514043090\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 043040-1 open base cleat?\u003c\/strong\u003e The Sea-Dog 043040-1 open base cleat measures 4 inches in overall length and 7\/8 inch in height, making it a compact cleat suited to smaller boats and dock applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e This cleat is made from injection molded nylon that resists corrosion and UV damage, which is why Sea-Dog uses it for the 043040-1 open base cleat rather than metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'open base' mean on this cleat?\u003c\/strong\u003e Open base refers to a molded-in recess in the base of the 043040-1 cleat that traps sealant in place during mounting, giving a more watertight seal around the fastener holes than a flat-base cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners does the 043040-1 cleat require?\u003c\/strong\u003e Two #8 flat head fasteners are needed to install the Sea-Dog 043040-1 cleat; fasteners are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat sold as a single piece or a pair?\u003c\/strong\u003e The 043040-1 is sold as a single black cleat, though it is packed in standard quantities of 10 pieces at the distributor level.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sea-Dog make this cleat in white?\u003c\/strong\u003e Yes, Sea-Dog produces this same 4 inch open base cleat design in white as a separate part number in addition to the black 043040-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cleat weigh?\u003c\/strong\u003e The Sea-Dog 043040-1 open base cleat weighs 0.088 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this cleat used for?\u003c\/strong\u003e The 043040-1 is used to secure dock lines, mooring lines, and fenders on boats, docks, kayaks, and other small watercraft or dock structures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat UV and saltwater resistant?\u003c\/strong\u003e Yes, the nylon construction of the 043040-1 open base cleat is corrosion and UV resistant, making it suitable for continuous exposure to sun and marine water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sea-Dog offer larger versions of this same cleat?\u003c\/strong\u003e Yes, the open base cleat design used for the 4 inch 043040-1 is also available from Sea-Dog in other lengths for applications needing a larger cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 043040-1 cleat?\u003c\/strong\u003e The UPC for the Sea-Dog 043040-1 black 4 inch open base cleat is 035514043090.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544041179,"sku":"S-D-043040-1","price":4.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7471.jpg?v=1784421759"},{"product_id":"sea-dog-043340-1-heavy-duty-cleat-4-1-4-black-nylon-tie-down-cleat-pair","title":"Sea-Dog Heavy Duty Nylon Cleat, 4-1\/4 Inch, Black, Pack of 2","description":"\u003cp\u003eThe Sea-Dog Heavy Duty Cleat is an injection molded nylon tie-down cleat built for securing dock lines, fender lines, flag halyards, canvas tie-downs, and other related accessories aboard a boat. Constructed of UV resistant and corrosion resistant injection molded nylon, this cleat is designed to hold up to sun, salt spray, and repeated use without cracking or fading the way many lower-grade plastics do. The cleat measures 4-1\/4 inches and features flared posts that add strength and stability when lines are cinched down under load, making it a dependable choice for everyday cleating tasks around the deck, rail, or dock.\u003c\/p\u003e\u003cp\u003eThis cleat is sold as a pack of two and finished in black. It is designed for easy installation on flat mounting surfaces; fasteners are not included, so screws or bolts sized for the mounting holes should be purchased separately based on the mounting surface. Because it is molded entirely from nylon rather than metal, it will not corrode, rust, or leave stains on gelcoat or fiberglass, making it a popular upgrade or replacement for boats, docks, and canvas covers where a lightweight, low-maintenance cleat is preferred over stainless steel or chrome-plated bronze hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 043340-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 4-1\/4 Inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514043052\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 043340-1 cleat?\u003c\/strong\u003e The Sea-Dog 043340-1 heavy duty cleat measures 4-1\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made of?\u003c\/strong\u003e Sea-Dog part 043340-1 is made of injection molded nylon that resists UV exposure and corrosion, so it will not rust or stain gelcoat the way metal hardware can.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cleats come in a package?\u003c\/strong\u003e The 043340-1 cleat is sold as a pack of two.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting screws included with this cleat?\u003c\/strong\u003e No, fasteners are not included with the Sea-Dog 043340-1 cleat, so screws or bolts should be sourced separately to match the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog 043340-1 cleat?\u003c\/strong\u003e This cleat is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this cleat typically used for?\u003c\/strong\u003e It is used for tying down fenders, flag halyards, canvas covers, and similar dock or boat accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does one package weigh?\u003c\/strong\u003e The Sea-Dog 043340-1 cleat weighs 0.15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this nylon cleat corrode like a metal cleat?\u003c\/strong\u003e No. Because the 043340-1 cleat is injection molded nylon rather than metal, it will not corrode or rust in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat easy to install?\u003c\/strong\u003e Yes, the Sea-Dog 043340-1 cleat is designed for durable, easy installation on a flat mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a nylon cleat over a stainless steel one?\u003c\/strong\u003e A nylon cleat like the Sea-Dog 043340-1 is lighter than stainless steel, will not scratch gelcoat or fiberglass, and resists UV and corrosion without the higher cost of stainless hardware.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544073947,"sku":"S-D-043340-1","price":7.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4646.jpg?v=1784421772"},{"product_id":"sea-dog-043050-1-open-base-nylon-cleat-5-inch-black-pair-corrosion-uv-resistant-dock-cleat","title":"Sea-Dog Open Base Cleat 5 Inch, Black Nylon, Sold as a Pair","description":"\u003cp\u003eThe Sea-Dog 043050-1 Open Base Cleat is a 5 inch black nylon cleat designed for securing dock lines and mooring lines on boats and docks. It is built with a molded-in recess in the base that traps sealant in place during installation, creating a more watertight seal around the mounting fasteners and helping to prevent water intrusion into the deck or dock surface below. The cleat is constructed of durable injection molded nylon that resists corrosion and UV degradation, making it a long-lasting choice for constant exposure to sun, salt water, and moisture.\u003c\/p\u003e\u003cp\u003eThis open base design mounts with two flat head fasteners (not included) sized for a #10 screw. The cleat measures 5 inches in overall length with a height of 1-1\/16 inches. It is sold as a matched pair, with two cleats included per package. This 5 inch size is part of the Sea-Dog open base cleat lineup, which also includes smaller 3 inch and 4 inch sizes, and this same 5 inch cleat is also offered in white under a separate part number for buyers who want to match different deck or hull colors.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 043050-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 flat head (fasteners not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.152 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Sold as a pair (2 cleats per package)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514043106\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 043050-1 open base cleat?\u003c\/strong\u003e The Sea-Dog 043050-1 open base cleat measures 5 inches in overall length and 1-1\/16 inches in height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this cleat come in?\u003c\/strong\u003e The 043050-1 cleat is black. Sea-Dog also offers this same 5 inch open base cleat in white under a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cleat made of?\u003c\/strong\u003e It is made of injection molded nylon that resists corrosion and UV degradation, suited to ongoing marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with this cleat?\u003c\/strong\u003e No. The Sea-Dog 043050-1 cleat is designed for #10 flat head fasteners, which are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cleats are included in one package?\u003c\/strong\u003e This listing is sold as a matched pair, with two 043050-1 cleats included per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the recess in the base of the cleat do?\u003c\/strong\u003e The molded-in recess in the base of the 043050-1 cleat traps sealant in place during installation, helping create a more watertight seal at the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog open base cleat weigh?\u003c\/strong\u003e The Sea-Dog 043050-1 open base cleat weighs 0.152 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener size does the 043050-1 cleat use?\u003c\/strong\u003e It is designed to mount with #10 flat head fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat an open base or closed base design?\u003c\/strong\u003e The 043050-1 is an open base cleat, meaning the underside of the base is open with a recessed area to hold sealant rather than a fully enclosed base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 5 inch cleat compare to Sea-Dog's smaller open base cleats?\u003c\/strong\u003e The 5 inch 043050-1 is larger than Sea-Dog's 3 inch (043030-1) and 4 inch (043040-1) open base cleats and uses a larger #10 flat head fastener, compared to the #6 fastener on the 3 inch cleat and the #8 fastener on the 4 inch cleat.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544106715,"sku":"S-D-043050-1","price":5.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7471_01387ead-a0a9-438a-85ca-b705ab411390.jpg?v=1784421776"},{"product_id":"sea-dog-043065-1-open-base-nylon-cleat-6-1-2-in-black-sealant-trapping-molded-recess-base","title":"Sea-Dog Open Base Nylon Cleat, 6-1\/2 Inch, Black, Part 043065-1","description":"\u003cp\u003eThe Sea-Dog 043065-1 is a 6-1\/2 inch open base nylon cleat built for securing dock and mooring lines on boats and docks. It is molded from durable, corrosion and UV resistant injection molded nylon, making it a long-lasting alternative to metal cleats in the marine environment. The base of the cleat has a molded-in recess that traps sealant in place during installation, creating a more watertight seal at the mounting surface and helping prevent water intrusion into the deck or dock core below.\u003c\/p\u003e\u003cp\u003eThis cleat installs with two flat head fasteners sized for a #12 screw (fasteners are not included), and is finished in black to blend with dark deck hardware and trim. Its open base design leaves the underside of the horns clear, which some installers use with an optional rub plate for added line protection at the base. The 043065-1 is part of the Sea-Dog Open Base Cleat line, which is also offered in additional sizes and in white for the 5 inch size.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 043065-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection molded nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 6-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional Dimensions (per manufacturer spec sheet):\u003c\/strong\u003e 1-3\/8 inches x 1-11\/16 inches x 2-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #12 flat head (fasteners not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.166 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514043113\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal mount for boat decks and docks; not engine or model specific.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 043065-1 cleat?\u003c\/strong\u003e The 043065-1 has an overall length of 6-1\/2 inches, making it the mid-large size in the Sea-Dog Open Base Cleat lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e It is molded from injection molded nylon that resists corrosion and UV degradation, so it will not rust like metal deck hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 043065-1 cleat come in colors other than black?\u003c\/strong\u003e This part number is black; the Open Base Cleat series is also offered in white at the 5 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes an open base cleat different from a standard cleat?\u003c\/strong\u003e The Sea-Dog Open Base Cleat has a molded-in recess in its base that traps sealant in place during installation, giving a more watertight seal than a flat-base cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners does the 043065-1 cleat need?\u003c\/strong\u003e It mounts with two flat head fasteners sized for a #12 screw; fasteners are not included with the cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 043065-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog 043065-1 open base cleat weighs 0.166 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cleats come in a package?\u003c\/strong\u003e The 043065-1 is packed 10 each per case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a backing plate needed for this cleat?\u003c\/strong\u003e A backing plate is shown as an option for the Sea-Dog Open Base Cleat installation to reinforce the mounting surface, and a rub plate is also available as an optional accessory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 043065-1 cleat be used on a dock as well as a boat?\u003c\/strong\u003e Yes, the Sea-Dog open base nylon cleat is suited for both boat deck and dock mounting since it is a universal mounting cleat rather than a model-specific part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat hold up in saltwater conditions?\u003c\/strong\u003e Its injection molded nylon construction is corrosion and UV resistant, which suits the 043065-1 for saltwater and sun exposure on deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 043065-1 cleat?\u003c\/strong\u003e The UPC for the Sea-Dog Open Base Nylon Cleat, part 043065-1, is 035514043113.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544139483,"sku":"S-D-043065-1","price":7.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7471_a035ddd1-1dc8-42ef-8ec5-773549521720.jpg?v=1784421780"},{"product_id":"sea-dog-043540-1-zig-zag-cleat-injection-molded-nylon-fits-line-up-to-3-8-in-kayak-canoe-small-boat-cleat","title":"Sea-Dog 043540-1 Zig Zag Cleat - 3-1\/2 Inch Nylon Line Cleat for Kayaks and Canoes","description":"\u003cp\u003eThe Sea-Dog 043540-1 Zig Zag Cleat is a primary tie-off point built for kayaks, canoes, and other small vessels. Instead of tying knots, the operator simply weaves the line back and forth around the cleat's arms in a zig-zag pattern, a cross-functional lace-back design that makes single-handed tie-offs fast and secure. It is well suited for adjusting and securing anchor lines, mooring lines, fender lines, and utility or trailer cover lines, and accepts line up to 3\/8 inch in diameter.\u003c\/p\u003e\u003cp\u003eThe cleat is constructed of injection molded nylon that is corrosion resistant and UV stabilized, so it holds up to sun and saltwater exposure without rusting or becoming brittle. It measures 3-1\/2 inches in overall length (A), 15\/16 inch (B), 1-15\/16 inches (C), and 1-3\/4 inches at the base (D). Installation is straightforward: the cleat mounts with two 1\/4 inch flat head fasteners, which are not included, through its molded mounting holes. Its compact, lightweight design makes it a practical upgrade over traditional horn cleats on small boats where deck space and weight are at a premium.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 043540-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 3-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 15\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width (D):\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 1\/4 inch FH (flat head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Line Size:\u003c\/strong\u003e Up to 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.218 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514043304\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 043540-1 Zig Zag Cleat used for?\u003c\/strong\u003e It serves as a primary tie-off cleat on kayaks, canoes, and other small vessels, used for securing anchor lines, mooring lines, fender lines, and utility or trailer cover lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you tie a line to the Zig Zag Cleat?\u003c\/strong\u003e No knots are needed. The line is simply woven back and forth around the arms of the 043540-1 cleat in a zig-zag pattern, and its lace-back design allows for quick single-handed tie-offs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size line does the 043540-1 cleat accept?\u003c\/strong\u003e The Sea-Dog Zig Zag Cleat fits line up to 3\/8 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Zig Zag Cleat made of?\u003c\/strong\u003e It is made of injection molded nylon that is corrosion resistant and UV stabilized, so the 043540-1 cleat resists rust and sun degradation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 043540-1 cleat?\u003c\/strong\u003e The cleat measures 3-1\/2 inches (A) in overall length, 15\/16 inch (B), 1-15\/16 inches (C), and 1-3\/4 inches (D) at the base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Zig Zag Cleat weigh?\u003c\/strong\u003e The Sea-Dog 043540-1 Zig Zag Cleat weighs 0.218 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with the 043540-1 cleat?\u003c\/strong\u003e No, fasteners are not included. The cleat is designed to install with two 1\/4 inch flat head (FH) fasteners that the installer supplies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog Zig Zag Cleat?\u003c\/strong\u003e The 043540-1 Zig Zag Cleat is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 043540-1 different from Sea-Dog's other Zig Zag Cleat sizes?\u003c\/strong\u003e Yes, 043540-1 is the 3-1\/2 inch version identified by dimensions A through D of 3-1\/2 inches, 15\/16 inch, 1-15\/16 inches, and 1-3\/4 inches; ordering by this exact part number ensures you get this size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Zig Zag Cleat be used in place of a traditional horn cleat?\u003c\/strong\u003e Yes, the Sea-Dog 043540-1 works as a compact alternative to a horn-style cleat, using its zig-zag arm design instead of a knotted hitch to hold the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 043540-1 Zig Zag Cleat?\u003c\/strong\u003e The UPC for this cleat is 035514043304.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544270555,"sku":"S-D-043540-1","price":5.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7052.jpg?v=1784421813"},{"product_id":"sea-dog-044104-1-four-hole-hollow-base-cleat-4-1-2-in-chrome-plated-zinc-boat-dock-cleat","title":"Sea-Dog 4-1\/2 Inch Four-Hole Hollow Cleat, Chrome Plated Zinc, 044104-1","description":"\u003cp\u003eThe Sea-Dog 044104-1 is a 4-1\/2 inch four-hole hollow cleat built from die cast zinc with a chrome plated finish. It is designed as an economical mooring and docking cleat for freshwater applications, giving boat owners a simple, low-cost way to secure dock lines, fenders, and mooring ropes.\u003c\/p\u003e\u003cp\u003eThe cleat features an open (hollow) base rather than a solid casting, which reduces material and keeps the part lightweight while still providing a durable line-holding surface for everyday freshwater use. It surface mounts using four #8 flat head fasteners, which are not included and must be purchased separately. The overall length is 4-1\/2 inches with a 1-3\/4 inch base, making it a compact size suited to smaller boats, dinghies, docks, and similar applications where a full-size cleat is not needed.\u003c\/p\u003e\u003cp\u003eSea-Dog also offers a larger 6 inch version of this same four-hole hollow cleat design (044106-1) as a separate part for boats that need a bigger cleat and heavier #10 fasteners, so buyers should confirm which length fits their vessel before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 044104-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 4-Hole Cleat, Hollow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die cast zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Style:\u003c\/strong\u003e Open\/hollow base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 4-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Length:\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface mount, 4-hole pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #8 flat head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514044011\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal surface-mount cleat; not vessel or engine specific.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 044104-1 cleat?\u003c\/strong\u003e The 044104-1 has an overall length of 4-1\/2 inches with a 1-3\/4 inch base, making it a compact cleat suited to smaller boats and docks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 044104-1 cleat made of?\u003c\/strong\u003e It is made of die cast zinc with a chrome plated finish, giving it a durable, corrosion-resistant surface for freshwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat a solid or open base design?\u003c\/strong\u003e The 044104-1 uses an open, hollow base rather than a solid casting, which keeps the part lightweight while still providing a secure line-holding surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog 044104-1 cleat mounted?\u003c\/strong\u003e This cleat surface mounts using four #8 flat head fasteners; the fasteners are not included and need to be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 044104-1 fit a specific boat make or model?\u003c\/strong\u003e No, the 044104-1 is a universal surface-mount cleat and is not tied to a specific boat make, model, or engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 044104-1 and the Sea-Dog 6 inch cleat?\u003c\/strong\u003e The 044104-1 is the 4-1\/2 inch version of Sea-Dog's four-hole hollow cleat; Sea-Dog also makes a larger 6 inch version, part number 044106-1, sold separately for boats needing a bigger cleat and #10 fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 044104-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog 044104-1 cleat weighs 0.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 044104-1 cleat recommended for saltwater use?\u003c\/strong\u003e The 044104-1 is described as an economical choice intended for freshwater applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with the 044104-1 cleat?\u003c\/strong\u003e No, mounting fasteners are not included with the 044104-1; it requires four #8 flat head fasteners supplied separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 044104-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, 044104-1 is the manufacturer part number for this genuine Sea-Dog four-hole hollow cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounting holes does the 044104-1 cleat have?\u003c\/strong\u003e The 044104-1 is a four-hole cleat, mounting to the surface with four fastener holes.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544303323,"sku":"S-D-044104-1","price":8.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7473.jpg?v=1784421820"},{"product_id":"sea-dog-044106-1-four-hole-hollow-base-cleat-6-chrome-plated-zinc-boat-dock-cleat","title":"Sea-Dog 4-Hole Hollow Base Cleat, 6 Inch, Die Cast Chrome Plated Zinc","description":"\u003cp\u003eThe Sea-Dog 044106-1 is a 6 inch open\/hollow base cleat built for securing dock lines on freshwater boats, pontoons, and small craft. It is constructed of die cast zinc with a chrome plated finish, giving it a bright, corrosion-resistant surface that holds up to regular exposure at the dock. The open base design is an economical choice for freshwater applications where a fully enclosed cleat base is not required.\u003c\/p\u003e\u003cp\u003eThis cleat surface mounts using four fastener holes and accepts #10 flat head fasteners (fasteners not included), making it straightforward to install on a deck, dock, or gunwale. The 6 inch overall length places it in the mid-size range of Sea-Dog's hollow base cleat lineup, with a 2-3\/16 inch base width to match. Sea-Dog is a long-running, family owned marine hardware brand, and the 044106-1 reflects that same die cast build quality found across its cleat and chock line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 044106-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 4-Hole Hollow (Open) Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die cast zinc, chrome plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width:\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional Dimension:\u003c\/strong\u003e 1-9\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 flat head (fasteners not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface mount, 4-hole base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.47 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eIntended for freshwater applications; no specific boat make, model, or engine fitment is specified for this cleat.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 044106-1 cleat?\u003c\/strong\u003e The Sea-Dog 044106-1 measures 6 inches overall in length, with a base width of 2-3\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 044106-1 cleat made of?\u003c\/strong\u003e It is made of die cast zinc with a chrome plated finish, which resists corrosion in freshwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat rated for saltwater use?\u003c\/strong\u003e The Sea-Dog 044106-1 is described as an economical choice for freshwater applications; it is not marketed as a saltwater-rated cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners does the 044106-1 cleat use?\u003c\/strong\u003e This cleat mounts with four #10 flat head fasteners, which are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounting holes does this cleat have?\u003c\/strong\u003e The 044106-1 is a 4-hole cleat, meaning it surface mounts using four fastener holes through its open base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'hollow base' mean on this cleat?\u003c\/strong\u003e Hollow base (also called open base) means the underside of the cleat is not solid, which is a common, more economical construction used on the Sea-Dog 044106-1 for freshwater applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 044106-1 weigh?\u003c\/strong\u003e The Sea-Dog 044106-1 cleat weighs 0.47 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 044106-1 cleat come with mounting hardware?\u003c\/strong\u003e No, the four #10 flat head fasteners needed for installation are not included with the Sea-Dog 044106-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 044106-1 and the smaller 044104-1 cleat?\u003c\/strong\u003e The 044106-1 is the 6 inch version of Sea-Dog's hollow base cleat line, while the 044104-1 is the smaller 4-1\/2 inch version; both share the same die cast chrome plated zinc construction and #8 or #10 flat head fastener mounting, but differ in overall length and base dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 044106-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, the 044106-1 is a genuine Sea-Dog manufactured cleat, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the finish on this cleat?\u003c\/strong\u003e The Sea-Dog 044106-1 has a chrome plated finish over its die cast zinc body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used on a dock as well as a boat?\u003c\/strong\u003e Yes, the 044106-1 surface mounts with four fasteners and is suitable for dock or boat deck installation in freshwater settings.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544368859,"sku":"S-D-044106-1","price":10.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7473_22000552-6491-4f25-b88d-d07c67764279.jpg?v=1784421822"},{"product_id":"sea-dog-046104-1-closed-base-flat-head-cleat-4-die-cast-aluminum-for-aluminum-docks-boats","title":"Sea-Dog Closed Base Cleat, 4 Inch Flat Head Die Cast Aluminum Dock Cleat","description":"\u003cp\u003eThe Sea-Dog Closed Base Cleat (046104-1) is a 4 inch flat head dock cleat built from die cast aluminum for durable, corrosion-resistant service on boats and docks. Its closed base design features a large footprint that spreads load evenly across the mounting surface, making it well suited for securing dock lines, fenders, and mooring lines under repeated strain. Sea-Dog designed this cleat specifically for use on aluminum docks, vessels, and other aluminum surfaces, giving it a matched material profile that reduces the risk of galvanic corrosion common when dissimilar metals are paired together in a marine environment.\u003c\/p\u003e\u003cp\u003eThe cleat measures 4 inches in overall length (A), with a base width of 1 inch (B), a base height of 13\/16 inch (C), and an overall height of 1-5\/8 inches (D). It installs with two #10 flat head fasteners, which are not included, allowing the fastener heads to sit flush with the cleat surface for a clean, low-profile finish. At 0.108 pounds, it is a lightweight, compact hardware piece intended for smaller lines and general-purpose docking and tie-down use rather than heavy commercial mooring loads.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 046104-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Closed Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength (A):\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width (B):\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Height (C):\u003c\/strong\u003e 13\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height (D):\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.108 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514046121\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Surface:\u003c\/strong\u003e Aluminum docks and vessels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for use on aluminum docks, vessels, or other aluminum surfaces.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 046104-1 closed base cleat?\u003c\/strong\u003e The Sea-Dog 046104-1 measures 4 inches in overall length, with a base width of 1 inch, a base height of 13\/16 inch, and an overall height of 1-5\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e It is constructed of die cast aluminum, matching the material of the aluminum docks and vessels it is designed to be installed on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 046104-1 cleat come with mounting hardware?\u003c\/strong\u003e No, fasteners are not included. The cleat installs with two #10 flat head fasteners that must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is this cleat designed for?\u003c\/strong\u003e Sea-Dog designed the 046104-1 closed base cleat for use on aluminum docks, vessels, or other aluminum surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cleat weigh?\u003c\/strong\u003e The Sea-Dog 046104-1 closed base cleat weighs 0.108 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'closed base' mean on this cleat?\u003c\/strong\u003e A closed base cleat has a solid, enclosed base rather than an open cutout, which gives it a large footprint that distributes line loads evenly across the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this cleat use flat head fasteners?\u003c\/strong\u003e The flat head design of the 046104-1 lets fastener heads sit flush with the cleat surface for a clean, low-profile finish rather than protruding above it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 046104-1 cleat corrosion resistant?\u003c\/strong\u003e Yes, it is die cast aluminum, which resists corrosion and is specifically suited to pairing with aluminum dock and vessel surfaces to avoid galvanic corrosion issues.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 4 inch and 5 inch versions of this cleat?\u003c\/strong\u003e The 4 inch Sea-Dog closed base cleat (046104-1) has smaller overall dimensions and uses a #10 fastener, while the larger 5 inch and 6 inch versions in the same closed base flat head line use 1\/4 inch fasteners and have larger base dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used for mooring larger boats?\u003c\/strong\u003e The 046104-1 is a compact 4 inch cleat best suited to lighter-duty dock line, fender, and tie-down use rather than heavy mooring loads.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544401627,"sku":"S-D-046104-1","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7477.jpg?v=1784421828"},{"product_id":"sea-dog-046105-1-closed-base-cleat-5-in-flat-head-die-cast-aluminum-dock-cleat","title":"Sea-Dog Open Base Cleat, Flat Head, 5 Inch Die Cast Aluminum, 046105-1","description":"\u003cp\u003eThe Sea-Dog Open Base Cleat, part number 046105-1, is a 5 inch flat head dock and deck cleat built from die cast aluminum. It features a large base designed to distribute mooring and docking loads evenly, reducing stress on the mounting surface. The cleat is designed for use on aluminum docks, vessels, or other aluminum surfaces, making it a practical choice for boaters and dock builders who want a mounting-surface-matched hardware set. Installation is straightforward: the cleat mounts with two flat head (FH) fasteners sized for a 1\/4 inch flat head fastener; fasteners are not included and must be sourced separately. Its die cast aluminum construction provides a rigid, corrosion-resistant cleat body suited to marine environments. At 5 inches overall, the 046105-1 sits in the middle of the Sea-Dog open base flat head cleat lineup, offering a size between the smaller 4 inch (046104-1) and larger 6 inch (046106-1) versions for boaters who need to match cleat size to line diameter and mounting space. Each unit weighs 0.152 pounds. This cleat is sold and packed for retail in standard packs of 10 each at the manufacturer level, with each individual cleat available as its own purchasable unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 046105-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Open Base Cleat, Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 1\/4 inch Flat Head (FH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Included:\u003c\/strong\u003e No, two FH fasteners required (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.152 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514046138\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Cleats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 046105-1 cleat made of?\u003c\/strong\u003e The 046105-1 open base cleat is constructed of die cast aluminum for a rigid, corrosion-resistant cleat body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this cleat?\u003c\/strong\u003e The 046105-1 measures 5 inches overall, with a base footprint of 1-1\/16 inches by 1-1\/16 inches and a height of 1-15\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo fasteners come with the 046105-1 cleat?\u003c\/strong\u003e No. The cleat installs with two flat head (FH) fasteners sized to 1\/4 inch, but the fasteners are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is this cleat designed for?\u003c\/strong\u003e The 046105-1 is designed for use on aluminum docks, vessels, or other aluminum surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 046105-1 cleat weigh?\u003c\/strong\u003e Each Sea-Dog 046105-1 open base cleat weighs 0.152 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 046104-1, 046105-1, and 046106-1 cleats?\u003c\/strong\u003e These are the same open base, flat head, die cast aluminum cleat design in three sizes: the 046104-1 is 4 inches, the 046105-1 is 5 inches, and the 046106-1 is 6 inches overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this cleat have a large base?\u003c\/strong\u003e The 046105-1 has a large base designed to distribute mooring and docking loads evenly across the mounting surface, reducing stress at the attachment points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 046105-1 a closed base or open base cleat?\u003c\/strong\u003e The 046105-1 is an open base flat head cleat in the Sea-Dog cleat lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener type does the 046105-1 use?\u003c\/strong\u003e It uses a 1\/4 inch flat head (FH) fastener, with two fasteners needed per cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog 046105-1 cleat sold?\u003c\/strong\u003e The 046105-1 is manufactured and cataloged in standard packs of 10 each, with individual units available for purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 046105-1 cleat corrode in a marine environment?\u003c\/strong\u003e The die cast aluminum construction of the 046105-1 is built to hold up in marine environments, particularly when mounted on aluminum docks or vessels.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544467163,"sku":"S-D-046105-1","price":5.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7477_a3509656-9c00-496c-bfcd-8b37fe01228c.jpg?v=1784421849"},{"product_id":"sea-dog-046106-1-flat-head-closed-base-cleat-6-in-die-cast-aluminum-for-aluminum-docks-and-boats","title":"Sea-Dog 6 Inch Flat Head Closed Base Cleat, Die Cast Aluminum, 046106-1","description":"\u003cp\u003eThis Sea-Dog 046106-1 cleat is a 6 inch flat head closed base cleat built from die cast aluminum. It is designed for use on aluminum docks, vessels, or other aluminum surfaces, and features a large base that distributes mooring and load stress evenly across the mounting surface rather than concentrating it at the fasteners. The closed base design gives the cleat a solid, finished look while the flat head profile keeps the mounting screws countersunk and flush with the base for a clean installation.\u003c\/p\u003e\u003cp\u003eThe cleat installs with two flat head fasteners (not included), so buyers should have appropriate hardware on hand sized to match the base before installation. It is sold individually and is part of Sea-Dog's line of die cast aluminum flat head closed base cleats, which is also offered in 4 inch and 5 inch sizes for smaller or larger mounting applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 046106-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Flat Head Closed Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimension B:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimension C:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimension D:\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e 1\/4 inch flat head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Two flat head fasteners required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.226 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514046015\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 046106-1 cleat?\u003c\/strong\u003e The Sea-Dog 046106-1 is a 6 inch flat head closed base cleat, measuring 6 inches overall with a base measuring 1-3\/8 inches by 1-3\/8 inches and an overall height of 2-3\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made of?\u003c\/strong\u003e This cleat is constructed of die cast aluminum, making the Sea-Dog 046106-1 suitable for use on aluminum docks, vessels, or other aluminum surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 046106-1 cleat come with mounting hardware?\u003c\/strong\u003e No, fasteners are not included. The Sea-Dog 046106-1 installs with two 1\/4 inch flat head fasteners that must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an open base or closed base cleat?\u003c\/strong\u003e The Sea-Dog 046106-1 is a closed base cleat, giving it a solid base profile rather than an open cutout design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'flat head' mean for this cleat?\u003c\/strong\u003e Flat head refers to the countersunk fastener style used to mount the cleat, allowing the mounting screws on the Sea-Dog 046106-1 to sit flush with the base surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 046106-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog 046106-1 weighs 0.226 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 046106-1 sold as a single cleat or a pair?\u003c\/strong\u003e It is sold individually as one cleat, part number 046106-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is this cleat designed for?\u003c\/strong\u003e The 046106-1 is designed for use on aluminum docks, vessels, or other aluminum surfaces, where its large closed base distributes mooring loads evenly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre smaller or larger sizes of this cleat available?\u003c\/strong\u003e Yes, Sea-Dog also offers this flat head closed base cleat design in 4 inch and 5 inch sizes in addition to the 6 inch 046106-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 046106-1 cleat?\u003c\/strong\u003e The UPC for the Sea-Dog 046106-1 6 inch cleat is 035514046015.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the cleat have a large base?\u003c\/strong\u003e The large base on the Sea-Dog 046106-1 is designed to distribute mooring and load stress evenly across the mounting surface, reducing strain on individual fasteners.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544499931,"sku":"S-D-046106-1","price":7.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7477_3aa329ed-44c4-47f6-8f07-61cddc056d1c.jpg?v=1784421858"},{"product_id":"sea-dog-046108-1-flat-head-open-base-cleat-8-inch-die-cast-aluminum-dock-cleat","title":"Sea-Dog 046108-1 Flat Head Open Base Cleat, 8 Inch, Die Cast Aluminum","description":"\u003cp\u003eThe Sea-Dog 046108-1 is an 8 inch Flat Head Open Base Cleat built for securing dock lines on aluminum docks, vessels, and other aluminum surfaces. It is constructed of die cast aluminum for corrosion resistance and long-term durability in a marine environment. The open base design features a large footprint that spreads mooring and docking loads evenly across the mounting surface, reducing stress on the fasteners and the surface itself rather than concentrating it at a single point.\u003c\/p\u003e\u003cp\u003eThis cleat mounts with two flat head (FH) fasteners, which are not included, allowing the fastener heads to sit flush for a clean, low-profile installation. The base measures 1-1\/2 inches wide, and the cleat has an 8 inch overall length, making it suited for smaller to mid-size cleat applications where a compact, flush-mount hardware piece is needed. Each unit is sold individually.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 046108-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions (A x B x C x D):\u003c\/strong\u003e 8 inches x 1-7\/8 inches x 1-1\/2 inches x 2-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e 1\/4 inch Flat Head (FH), not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.346 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Package Quantity:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514046022\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 8.75 x 7.13 x 2.88 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 046108-1 cleat made from?\u003c\/strong\u003e The Sea-Dog 046108-1 Flat Head Open Base Cleat is made of die cast aluminum, chosen for its corrosion resistance in marine settings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this cleat?\u003c\/strong\u003e The 046108-1 has an 8 inch overall length, with a base width of 1-1\/2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners does the 046108-1 cleat require?\u003c\/strong\u003e It installs with two 1\/4 inch flat head (FH) fasteners, which are not included with the cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat sold as a single unit or a pair?\u003c\/strong\u003e The Sea-Dog 046108-1 is sold individually, one cleat per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is the 046108-1 designed for?\u003c\/strong\u003e It is designed for mounting on aluminum docks, vessels, or other aluminum surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this cleat have an open base design?\u003c\/strong\u003e The open base on the 046108-1 features a large footprint that spreads mooring and docking loads evenly, reducing stress on the fasteners and mounting surface compared to a smaller base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 046108-1 cleat weigh?\u003c\/strong\u003e It weighs 0.346 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the flush flat head design matter for installation?\u003c\/strong\u003e Yes, the flat head (FH) fastener style used with the 046108-1 lets the fastener heads sit flush with the base for a clean, low-profile mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 046108-1 cleat?\u003c\/strong\u003e Its dimensions are 8 inches by 1-7\/8 inches by 1-1\/2 inches by 2-11\/16 inches, as measured across the cleat body and base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 046108-1 suitable for permanent or removable installations?\u003c\/strong\u003e It is a fastener-mounted cleat (not welded), installed with two flat head fasteners, making it suitable for standard bolt-on mounting rather than a welded permanent install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the 046108-1 cleat?\u003c\/strong\u003e This cleat is manufactured by Sea-Dog.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many of these cleats come in a standard package?\u003c\/strong\u003e The 046108-1 has a standard pack quantity of 10 each, though it is also available and sold individually.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544565467,"sku":"S-D-046108-1","price":10.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7478.jpg?v=1784421861"},{"product_id":"sea-dog-060040-1-bow-chocks-4-3-4-316-stainless-steel-left-right-pair-for-mooring-dock-lines","title":"Sea-Dog Bow Chock 060040-1, 316 Stainless Steel, 4-3\/4 Inch, Pair","description":"\u003cp\u003eThe Sea-Dog Bow Chock 060040-1 gives your mooring and dock lines a smooth, controlled lead off the bow, protecting your deck from abrasion caused by working lines under load. Each chock is designed with rounded edges set at a proper slant, a shape that prevents chafing as the line moves with the boat's motion. This part is sold as a matched pair, with both the left (port) and right (starboard) bow chocks included, so one purchase outfits both sides of the bow.\u003c\/p\u003e\u003cp\u003eConstruction is investment cast 316 stainless steel, a grade chosen for its resistance to marine corrosion and its strength under the repeated load of mooring and dock lines. The chock measures 4-3\/4 inches along its A dimension, with a 5\/8 inch B dimension, a 1\/2 inch C dimension, and a 3-1\/4 inch D dimension, and each chock mounts with a #10 flat head fastener (fasteners are not included and must be sourced separately). At 0.27 pounds, it is a compact, low-profile fitting suited to the bow of small to mid-size boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 060040-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bow Chock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 4-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 3-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.27 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Left and right bow chocks (pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal deck fitting, not restricted to a specific make, model, or year of boat.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 060040-1 bow chock made of?\u003c\/strong\u003e The 060040-1 bow chock is made of investment cast 316 stainless steel, a corrosion-resistant grade suited to saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bow chock come as a pair?\u003c\/strong\u003e Yes, part number 060040-1 is sold as a matched pair and includes both the left and right bow chock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 060040-1 bow chock?\u003c\/strong\u003e The 060040-1 bow chock measures 4-3\/4 inches (dimension A), 5\/8 inches (dimension B), 1\/2 inches (dimension C), and 3-1\/4 inches (dimension D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the bow chock weigh?\u003c\/strong\u003e Each Sea-Dog 060040-1 bow chock weighs 0.27 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fasteners does the 060040-1 bow chock use?\u003c\/strong\u003e This bow chock is designed to install with a #10 flat head fastener; fasteners are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with the bow chock?\u003c\/strong\u003e No, the Sea-Dog 060040-1 bow chock installs with two flat head fasteners that are not included and need to be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this bow chock and a Skene chock?\u003c\/strong\u003e The 060040-1 bow chock provides a smooth, slanted lead for mooring and dock lines, while a Skene chock has overlapping tips designed to keep the line from working free as the boat moves; both are made of investment cast 316 stainless steel but serve slightly different chafe-control purposes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this chock prevent my dock lines from chafing?\u003c\/strong\u003e Yes, the 060040-1 bow chock is designed with rounded edges set at a proper slant specifically to minimize chafing on mooring and dock lines under load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 060040-1 bow chock suitable for saltwater use?\u003c\/strong\u003e Yes, it is constructed of investment cast 316 stainless steel, a grade chosen for corrosion resistance in marine and saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 060040-1 fit a specific boat make or model?\u003c\/strong\u003e No, the Sea-Dog 060040-1 bow chock is a universal deck fitting and is not limited to a specific boat make, model, or year.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 'A' through 'D' measurements refer to on the bow chock?\u003c\/strong\u003e For the 060040-1 bow chock, these are the manufacturer's reference dimensions: A is 4-3\/4 inches, B is 5\/8 inches, C is 1\/2 inches, and D is 3-1\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the bow chock installed on the boat?\u003c\/strong\u003e The Sea-Dog 060040-1 bow chock is installed using two flat head (#10) fasteners per chock, which are not included with the part.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544762075,"sku":"S-D-060040-1","price":40.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7485.jpg?v=1784421915"},{"product_id":"attwood-12048-4-6-inch-fold-down-dock-cleat-white-aluminum-low-profile-marine-mooring-cleat","title":"Attwood 12048-4 Fold-Down Dock Cleat, 6-Inch, White Aluminum","description":"\u003cp\u003eThe attwood 12048-4 is a 6-inch fold-down dock cleat built from aluminum and finished in white for corrosion resistance in marine environments. Designed for small boats and watercraft, the cleat folds flat against the dock surface when not in use, keeping the low-profile design clear of foot traffic and reducing the tripping hazard posed by taller, fixed cleats. When it is time to tie off, the cleat simply flips back up to secure mooring or docking lines.\u003c\/p\u003e\u003cp\u003eConstruction is marine-grade aluminum with a corrosion-resistant exterior finish, making the 12048-4 suitable for saltwater and freshwater dock installations alike. It installs on standard dock surfaces using two 3\/8-inch carriage bolts (mounting hardware is not included). This is the 6-inch size in attwood's fold-down cleat line, sized for smaller boats and personal watercraft where a compact, unobtrusive cleat is preferred over a larger fixed cleat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 12048-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fold-Down Dock Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Corrosion-resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleat Length:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7.05 x 6.78 x 2.7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.69 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Not included; requires (2) 3\/8-inch carriage bolts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697120489\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the attwood 12048-4 dock cleat?\u003c\/strong\u003e The 12048-4 is a 6-inch fold-down cleat, with overall item dimensions of 7.05 x 6.78 x 2.7 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 12048-4 cleat made of?\u003c\/strong\u003e It is made of marine-grade aluminum with a corrosion-resistant white finish, suited to saltwater and freshwater dock use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fold-down cleat come with mounting hardware?\u003c\/strong\u003e No, mounting hardware is not included with the 12048-4; it installs using two 3\/8-inch carriage bolts that you supply separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a fold-down cleat differ from a standard fixed dock cleat?\u003c\/strong\u003e The 12048-4 folds flat against the dock when not in use and flips up to tie off, keeping its low profile clear of foot traffic, unlike a taller fixed cleat that remains upright and can be a tripping hazard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 12048-4 cleat?\u003c\/strong\u003e This cleat is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the attwood 12048-4 weigh?\u003c\/strong\u003e It weighs 0.69 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat suitable for small boats?\u003c\/strong\u003e Yes, the 6-inch attwood 12048-4 is sized for small boats and watercraft where a compact fold-down cleat is preferred.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a larger fold-down cleat available?\u003c\/strong\u003e Yes, attwood also offers an 8-inch fold-down cleat (part number 12049-4) in white as a separate part for larger boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 12048-4 corrode in saltwater?\u003c\/strong\u003e The cleat's aluminum construction has a corrosion-resistant finish designed to hold up in saltwater and freshwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the attwood 12048-4?\u003c\/strong\u003e The package includes the fold-down cleat itself; mounting bolts are not included.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989665067227,"sku":"ATT-12048-4","price":16.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71pfCTIYVAL.jpg?v=1784486490"},{"product_id":"attwood-12049-4-8-inch-white-fold-down-dock-cleat-for-small-boats-and-docks","title":"Attwood 8-Inch Fold-Down Dock Cleat, White, Model 12049-4","description":"\u003cp\u003eThe Attwood 12049-4 is an 8-inch fold-down dock cleat finished in white, built for tying off small boats and watercraft at the dock. Unlike a fixed, upright cleat, this design folds flat against the mounting surface when it is not in use and flips back up when it is time to tie off, keeping the cleat clear of foot traffic. Its low-profile shape reduces the trip hazard that comes with taller, stationary dock cleats, making it a practical choice for gunwales, swim platforms, docks, and other high-traffic areas where a permanently upright cleat would be in the way.\u003c\/p\u003e\u003cp\u003eThe cleat measures 7.05 x 6.78 x 2.7 inches overall with an 8-inch cleat length, and weighs 1.19 pounds. It installs with a panel-mount setup using two 3\/8-inch carriage bolts; mounting hardware is not included, so bolts should be purchased separately to match the thickness of the mounting surface. The cleat ships as a standalone unit in white, ready to bolt onto the dock or boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 12049-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fold-Down Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleat Length:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7.05 x 6.78 x 2.7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.19 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e 2 x 3\/8-inch carriage bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697120496\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 12049-4 dock cleat made of?\u003c\/strong\u003e The Attwood 12049-4 is a plastic fold-down cleat finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Attwood 12049-4 cleat?\u003c\/strong\u003e It has an 8-inch cleat length, with overall dimensions of 7.05 x 6.78 x 2.7 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 12049-4 cleat come with mounting bolts?\u003c\/strong\u003e No. It installs with two 3\/8-inch carriage bolts, which are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cleat weigh?\u003c\/strong\u003e The Attwood 12049-4 weighs 1.19 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is a fold-down cleat different from a fixed dock cleat?\u003c\/strong\u003e A fold-down cleat like the 12049-4 lies flat against the dock or gunwale when not in use and flips upright to tie off a line, while a fixed cleat stands upright permanently.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Attwood 12049-4 cleat?\u003c\/strong\u003e This cleat is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 12049-4 cleat installed?\u003c\/strong\u003e It uses a panel-mount installation with two 3\/8-inch carriage bolts driven through the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the low-profile design useful for anything besides looks?\u003c\/strong\u003e Yes, folding the 12049-4 cleat flat when it is not tied off keeps it clear of foot traffic and reduces the trip hazard posed by taller, upright dock cleats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Attwood 12049-4 cleat meant for?\u003c\/strong\u003e It is sized for small boats and watercraft that need a compact, occasional-use tie-off point at the dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 12049-4 cleat?\u003c\/strong\u003e The order includes the Attwood 12049-4 fold-down cleat itself; mounting bolts are not included.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989665329371,"sku":"ATT-12049-4","price":30.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71VzyOT_8yL.jpg?v=1784486503"},{"product_id":"attwood-66510-7-flush-cleat-4-1-2-counter-sunk-316-stainless-steel-with-backing-plate","title":"Attwood 4-1\/2 Inch Flush Cleat, Countersunk, 316 Stainless Steel, Model 66510-7","description":"\u003cp\u003eThe Attwood 66510-7 is a 4-1\/2 inch countersunk flush cleat built from enhanced 316 stainless steel alloy for long-term durability in a marine environment. Unlike a fixed deck cleat that projects upward at all times, this flush-mount design recesses below the deck surface when not in use and is simply pulled up from its body when a line needs to be secured. Recessing the cleat below deck level reduces the chance of a snagged line, a stubbed toe, or a tripping hazard on walkways, swim platforms, and other high-traffic areas of a boat.\u003c\/p\u003e\u003cp\u003eConstruction is straightforward: the cleat body is countersunk into the mounting surface and the assembly includes a backing plate to reinforce the installation and spread the load across the mounting area. The simple mechanical design has few points of failure, which supports dependable, long-term operation in wet and corrosive conditions. The 316 stainless steel construction resists corrosion better than standard 304-grade hardware, making it well suited to saltwater use.\u003c\/p\u003e\u003cp\u003eThis is a countersunk flush cleat (as distinct from the stud-mount version), sized at 4-1\/2 inches. It is intended as a direct, drop-in replacement or new installation wherever a flush-mount deck cleat of this size and mounting style is required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 66510-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Flush Cleat - Counter Sunk\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 4-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Countersunk, flush mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Enhanced 316 Stainless Steel Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\/Color:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Backing plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.6138 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697665102\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Attwood 66510-7 flush cleat?\u003c\/strong\u003e The Attwood 66510-7 is a 4-1\/2 inch flush cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat surface-mount or flush-mount?\u003c\/strong\u003e The 66510-7 is a countersunk, flush-mount cleat that recesses below the deck surface rather than sitting on top of it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a flush cleat like this one operate?\u003c\/strong\u003e You simply pull the cleat up out of its recessed body to use it, then push it back down flush with the deck when the line is released.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 66510-7 made from?\u003c\/strong\u003e It is made from enhanced 316 stainless steel alloy, a grade chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 66510-7 come with a backing plate?\u003c\/strong\u003e Yes, the Attwood 66510-7 flush cleat includes a backing plate for the installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a flush cleat over a standard deck cleat?\u003c\/strong\u003e Because it recesses below the deck when not in use, the 66510-7 reduces the risk of snagged lines and tripping hazards compared with a cleat that stands upright at all times.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the countersunk or stud-mount version of the cleat?\u003c\/strong\u003e The 66510-7 is the countersunk version; a separate stud-mount version is offered under a different part number, so check your mounting style before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 66510-7?\u003c\/strong\u003e The UPC for the Attwood 4-1\/2 inch flush cleat, model 66510-7, is 022697665102.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 66510-7 weigh?\u003c\/strong\u003e The Attwood 66510-7 flush cleat weighs 1.6138 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill 316 stainless steel resist corrosion in saltwater?\u003c\/strong\u003e 316 stainless steel, used in the 66510-7 construction, offers better corrosion resistance than standard 304-grade stainless in saltwater conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Attwood 66510-7?\u003c\/strong\u003e The Attwood 66510-7 flush cleat ships with the cleat body and a backing plate for mounting.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989672800475,"sku":"ATT-66510-7","price":80.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51y0LytAfeL.jpg?v=1784487001"},{"product_id":"attwood-66517-7-neat-cleat-6-boat-rope-cleat-low-profile-line-securing-cleat","title":"Attwood Neat Cleat 6 Inch Boat Cleat for Ropes and Lines, Part Number 66517-7","description":"\u003cp\u003eThe attwood Neat Cleat 66517-7 is a compact, low-profile cleat designed to secure ropes and lines on your boat. Built for convenience, durability, and easy installation, this 6 inch cleat is sized for small to medium sized boats, giving you a reliable and hassle-free way to tie down your lines when docking or mooring. Its low-profile shape keeps the deck looking neat and tidy while still maintaining the strength and functionality needed for everyday line handling. The Neat Cleat weighs 2 pounds and installs where a traditional cleat would normally go, offering boat owners a cleaner-looking alternative without sacrificing holding power.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 66517-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Name:\u003c\/strong\u003e Neat Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697665171\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Cleats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the attwood Neat Cleat 66517-7 used for?\u003c\/strong\u003e The attwood Neat Cleat 66517-7 is used to secure ropes and lines on a boat, giving you a reliable way to tie down and dock your boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the attwood Neat Cleat 66517-7?\u003c\/strong\u003e This attwood cleat measures 6 inches, sized for small to medium sized boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the attwood Neat Cleat 66517-7 weigh?\u003c\/strong\u003e The attwood Neat Cleat 66517-7 weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the attwood Neat Cleat 66517-7 suitable for small boats?\u003c\/strong\u003e Yes, the Neat Cleat is designed for small to medium sized boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the attwood Neat Cleat have a low-profile design?\u003c\/strong\u003e Yes, the attwood 66517-7 has a low-profile design that keeps the deck looking neat and tidy while still maintaining strength and functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the attwood Neat Cleat 66517-7 easy to install?\u003c\/strong\u003e Yes, the attwood 66517-7 is designed for convenient, easy installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the attwood Neat Cleat 66517-7?\u003c\/strong\u003e The UPC for the attwood Neat Cleat 66517-7 is 022697665171.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cleats are included when you order the attwood 66517-7?\u003c\/strong\u003e The attwood Neat Cleat 66517-7 comes as a single unit, 1 cleat per order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the attwood Neat Cleat 66517-7 be used for docking and mooring lines?\u003c\/strong\u003e Yes, it provides a reliable and hassle-free way to tie down lines, making it suitable for docking and mooring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the compact design of the attwood 66517-7 sacrifice strength?\u003c\/strong\u003e No, despite its low-profile, compact shape, the attwood Neat Cleat 66517-7 maintains its strength and functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat part number should I order for the attwood Neat Cleat?\u003c\/strong\u003e Order part number 66517-7 to get the genuine attwood Neat Cleat.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989672833243,"sku":"ATT-66517-7","price":84.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61LO_wMow5L.jpg?v=1784487001"},{"product_id":"attwood-66514-7-6-counter-sunk-flush-cleat-316-stainless-steel-pull-up-boat-cleat","title":"Attwood 66514-7 Counter-Sunk Flush Cleat, 6 Inch, 316 Stainless Steel","description":"\u003cp\u003eThe Attwood 66514-7 Counter-Sunk Flush Cleat is a 6 inch pop-up deck cleat designed to sit flush with the deck surface instead of protruding like a traditional fixed cleat. When not in use, the cleat recesses into its cast body, eliminating a snag point for lines, feet, and gear on deck. To use it, simply pull the cleat up out of its housing; it is captured in the body with rubber seals and ball detents so it stays water-resistant and operates smoothly over repeated use. The cast body and cleat are built from 316 stainless steel using a patented design, giving it corrosion resistance suited to marine environments. Installation follows a standard four-hole mounting pattern, keeping the process straightforward for a deck-mounted cleat replacement or new install. An optional drainage receptacle is available to mount below the cleat to help route water away from the recess. This cleat is a good fit for boat owners who want dock and towing tie-off points without a raised cleat cluttering the deck or catching lines underfoot.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 66514-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Counter-Sunk Flush Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Standard four-hole mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal Type:\u003c\/strong\u003e Rubber seals with ball detents\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Pull-up flush\/recessed cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.0925 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697665140\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Cleats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Accessory:\u003c\/strong\u003e Drainage receptacle (mounts below cleat, sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Attwood 66514-7 cleat?\u003c\/strong\u003e The Attwood 66514-7 Counter-Sunk Flush Cleat is a 6 inch cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a flush cleat like this one work?\u003c\/strong\u003e You simply pull the cleat up out of its cast body to use it; the Attwood 66514-7 recesses back down flush with the deck when not in use, keeping the deck clear of a raised tie-off point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 66514-7 cleat made from?\u003c\/strong\u003e It is made from 316 stainless steel using a patented cast design, which gives the Attwood 66514-7 corrosion resistance for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat water-resistant?\u003c\/strong\u003e Yes, the cleat is captured in its body with rubber seals and ball detents that keep the recessed cleat water-resistant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Attwood 66514-7 mounted?\u003c\/strong\u003e It uses a standard four-hole mounting pattern for installation into the deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cleat come with a drainage option?\u003c\/strong\u003e An optional drainage receptacle is available that mounts below the Attwood 66514-7 cleat to help drain off water from the recess.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 66514-7 cleat weigh?\u003c\/strong\u003e The Attwood 66514-7 Counter-Sunk Flush Cleat weighs 2.0925 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a flush cleat over a standard fixed cleat?\u003c\/strong\u003e Because the Attwood 66514-7 recesses into the deck when not in use, it removes a protruding cleat horn that can otherwise catch lines or trip feet on deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 66514-7 cleat?\u003c\/strong\u003e The Attwood 66514-7 Counter-Sunk Flush Cleat is supplied as the complete cast cleat and body assembly with its rubber seals and ball detents.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this cleat?\u003c\/strong\u003e The Attwood 66514-7 Counter-Sunk Flush Cleat carries UPC 022697665140.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989672964315,"sku":"ATT-66514-7","price":83.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41JZ2TIJ4-L.jpg?v=1784487013"},{"product_id":"attwood-66515-7-neat-cleat-4-1-2-in-retractable-pull-up-boat-cleat-316-stainless-steel","title":"Attwood Neat Cleat Retractable Boat Cleat, 4-1\/2 Inch, 316 Stainless Steel","description":"\u003cp\u003eThe Attwood Neat Cleat is a retractable boat cleat with a thin profile designed to install easily in narrow gunwales. Unlike a fixed cleat, the stanchion folds down flush when not in use and pops up for docking or towing, so there is no permanent snag point to catch a line, a foot, or a dock fender. A friction spring holds the cleat up at any position, keeping it in place once raised, and the same spring lets it fold back down flat against the deck when you are finished.\u003c\/p\u003e\u003cp\u003eEach stanchion is a solid 7\/8 inch rod of enhanced #316 stainless steel, giving it a beautiful, continuous contour with no sharp edges to snag lines or stub toes. Installation is straightforward: drill two holes with an appropriately sized hole saw and mount the cleat in place. Drainage receptacles are included and press-fit onto the threaded studs underneath the cleat to capture any moisture that gets into the mounting holes and route it down to the bilge; the receptacle outlet is sized for standard 1\/4 inch pilot tubing (tubing not included). Attwood backs the Neat Cleat with a lifetime warranty against corrosion, reflecting the marine-grade stainless construction.\u003c\/p\u003e\u003cp\u003eThis is a universal-mount hardware item suitable for boat gunwales, decks, or docks wherever a low-profile, retractable cleat is preferred over a fixed horn cleat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 66515-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Retractable boat cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e #316 stainless steel (enhanced alloy)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 4-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 3-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight (lowered):\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStanchion Rod Diameter:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrainage Receptacle Outlet:\u003c\/strong\u003e Fits standard 1\/4 inch pilot tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Neat Cleat with press-fit drainage receptacles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty against corrosion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.75 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697665157\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood Neat Cleat 66515-7 used for?\u003c\/strong\u003e It is a retractable boat cleat that folds down flush with the deck or gunwale when not in use and pops up for securing dock lines or a tow line, making it a low-profile alternative to a fixed horn cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Attwood 66515-7 Neat Cleat?\u003c\/strong\u003e This Neat Cleat measures 4-1\/2 inches long by 1-1\/2 inches wide, with a depth of 3-1\/8 inches and a lowered height of 1-5\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Neat Cleat made from?\u003c\/strong\u003e The 66515-7 Neat Cleat's stanchion is a solid 7\/8 inch rod of enhanced #316 stainless steel, chosen for its corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cleat stay up on its own once raised?\u003c\/strong\u003e Yes, a friction spring inside the Attwood Neat Cleat holds the stanchion up at any position once it is pulled up, and the same spring lets it fold back down flat when finished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 66515-7 Neat Cleat installed?\u003c\/strong\u003e Installation only requires drilling two holes with an appropriately sized hole saw and mounting the cleat; no additional hardware modification is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Attwood Neat Cleat?\u003c\/strong\u003e Each 66515-7 Neat Cleat ships with press-fit drainage receptacles that attach to the threaded studs underneath the cleat; 1\/4 inch pilot tubing is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat do the drainage receptacles do?\u003c\/strong\u003e They press onto the threaded mounting studs of the Neat Cleat to catch any moisture that enters through the mounting holes and channel it down to the bilge through standard 1\/4 inch pilot tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood Neat Cleat covered by a warranty?\u003c\/strong\u003e Attwood backs the 66515-7 Neat Cleat with a lifetime warranty against corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 66515-7 Neat Cleat weigh?\u003c\/strong\u003e The Attwood Neat Cleat weighs 1.75 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Neat Cleat different from a standard fixed cleat?\u003c\/strong\u003e Unlike a fixed horn cleat that always protrudes above the deck, the 66515-7 Neat Cleat retracts flush with the mounting surface when not in use, reducing snag points for lines and feet while still providing a full stainless steel cleat when raised.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Neat Cleat fit in a narrow gunwale?\u003c\/strong\u003e Yes, the 66515-7 is designed with a thin profile specifically so it can be installed in narrow gunwales where a bulkier fixed cleat would not fit.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989673062619,"sku":"ATT-66515-7","price":82.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6169KR9Ar9L.jpg?v=1784487020"},{"product_id":"perko-0566dp3chr-3-inch-chrome-zinc-boat-cleat-pair-dock-deck-cleat-3-8-max-rope","title":"Perko Open Base Cleat, 3 Inch Chrome Plated Zinc Alloy Boat Cleat","description":"\u003cp\u003eThe Perko 0566DP3CHR is a 3 inch open base cleat built for securing dock lines and mooring rope aboard boats and on dock installations. It is cast from zinc alloy and finished in chrome plating for a bright, corrosion-resistant surface that holds up in a marine environment. The open base design leaves the underside of the horns accessible, making it easy to wrap and cleat off a line quickly, and the compact 3 inch overall length suits smaller boats, dinghies, and dock edges where space is limited. Each cleat mounts with screws sized to the number 8 fastener and is rated for rope up to 3\/8 inch in diameter, which covers most dock lines and fender lines used on smaller craft. The base measures 3-1\/8 inches by 1-1\/2 inches, giving a stable footprint for through-bolting or screwing to a flat mounting surface. This cleat is sold in pairs, so one purchase equips both sides of a bow, stern, or dock cleat pair. The chrome plated zinc alloy construction pairs classic hardware styling with the durability needed for repeated line loading, making it a straightforward replacement or upgrade for aging or corroded deck hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0566DP3CHR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimensions:\u003c\/strong\u003e 3-1\/8 inches x 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Rope Size:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Size:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Sold in pairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226209253\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rope does the Perko 0566DP3CHR cleat handle?\u003c\/strong\u003e This cleat is rated for rope up to 3\/8 inch in diameter, which covers most dock and fender lines used on smaller boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the overall length of this cleat?\u003c\/strong\u003e The Perko 0566DP3CHR measures 3 inches overall in length, with a base footprint of 3-1\/8 inches by 1-1\/2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko 0566DP3CHR sold as a single cleat or a pair?\u003c\/strong\u003e It is sold in pairs, so one order provides matching cleats for both mounting points, such as port and starboard or bow and stern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e Zinc alloy with a chrome plated finish, giving the 0566DP3CHR a bright silver appearance and corrosion resistance for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat screw size is needed to mount this cleat?\u003c\/strong\u003e The 0566DP3CHR uses a number 8 screw size for mounting to the deck or dock surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an open base or closed base cleat design?\u003c\/strong\u003e The 0566DP3CHR is an open base cleat, leaving the underside of the horns accessible for quickly wrapping and securing a line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Perko 0566DP3CHR weigh?\u003c\/strong\u003e Each pair weighs 0.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Perko make this cleat in other sizes?\u003c\/strong\u003e Yes, the same open base cleat design is available in 2 inch and 4-1\/2 inch overall lengths in addition to the 3 inch 0566DP3CHR.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Perko 0566DP3CHR open base cleat carries UPC 085226209253.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used on both boats and docks?\u003c\/strong\u003e Yes, the 0566DP3CHR open base cleat is suited for mounting on boat decks as well as dock edges and pilings.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991107678427,"sku":"PKO-0566DP3CHR","price":20.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-0566DP3CHR__07950.1722385782.500.750_ae6dd6e3-26a8-4e4c-9bc8-47555a0c2fe6.jpg?v=1785188149"},{"product_id":"perko-1188dp6chr-6-open-base-cleat-chrome-plated-zinc-alloy-for-7-16-rope","title":"Perko 1188DP6CHR 6 Inch Open Base Cleat, Chrome Plated Zinc Alloy","description":"\u003cp\u003eThe Perko 1188DP6CHR is a 6 inch open base cleat built from chrome plated zinc alloy, designed for securing dock lines and mooring rope on boats and docks. The open base design allows lines to be looped and secured quickly, and the chrome plated finish resists corrosion in marine environments while giving a polished, durable appearance that matches other chrome hardware on deck. With an overall length of 6 inches and a base measuring 3 inches by 1-3\/4 inches, this cleat is sized to handle rope up to 7\/16 inch in diameter, making it suitable for mid-size boats and dock applications. The mounting holes are set 2.25 inches apart, center to center, and the cleat is fastened using number 10 screws. Constructed from solid zinc alloy rather than lightweight stamped metal, the 1188DP6CHR is built to withstand repeated line tension and outdoor exposure. This cleat is part of Perko's Fig. 1188 line of open base cleats, which is also available in 4 inch and 8 inch sizes for smaller or larger rope and mounting requirements. Installation is straightforward, requiring only a flat mounting surface and the appropriate screws for the mounting hole pattern.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1188DP6CHR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Overall:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimensions:\u003c\/strong\u003e 3 inches x 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Rope Size:\u003c\/strong\u003e 7\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Holes, Center to Center:\u003c\/strong\u003e 2.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Size:\u003c\/strong\u003e Number 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.61 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rope does the Perko 1188DP6CHR cleat handle?\u003c\/strong\u003e The Perko 1188DP6CHR is rated for rope up to 7\/16 inch in diameter, matching its 6 inch overall length and 3 inch by 1-3\/4 inch base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this cleat made of?\u003c\/strong\u003e It is made of zinc alloy with a chrome plated finish, giving the 1188DP6CHR corrosion resistance and a polished look for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far apart are the mounting holes?\u003c\/strong\u003e The mounting holes on the 1188DP6CHR are spaced 2.25 inches apart, center to center.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat screw size is needed to install this cleat?\u003c\/strong\u003e Number 10 screws are used to mount the Perko 1188DP6CHR to the deck or dock surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1188DP6CHR weigh?\u003c\/strong\u003e This cleat weighs 0.61 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Perko 1188DP6CHR come in other sizes?\u003c\/strong\u003e Yes, the same open base cleat design is available in 4 inch and 8 inch overall lengths as separate part numbers, each sized for a different maximum rope diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1188DP6CHR an open base or closed base cleat?\u003c\/strong\u003e The 1188DP6CHR is an open base cleat, allowing dock lines to be looped over the horns without threading through a closed frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the base size of this cleat?\u003c\/strong\u003e The base of the Perko 1188DP6CHR measures 3 inches by 1-3\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat hold up in saltwater conditions?\u003c\/strong\u003e The chrome plated finish over zinc alloy construction on the 1188DP6CHR is designed to resist corrosion in marine environments, including saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this cleat?\u003c\/strong\u003e The Perko 1188DP6CHR ships as a single open base cleat; mounting screws are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat suitable for a larger boat?\u003c\/strong\u003e With a 6 inch overall length and 7\/16 inch max rope rating, the 1188DP6CHR fits mid-size boats and dock applications; larger vessels needing thicker rope should consider the 8 inch version in the same series.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991120589019,"sku":"PKO-1188DP6CHR","price":27.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41CSLaDDO7L.jpg?v=1784491965"},{"product_id":"perko-1188dp4chr-4-chrome-plated-open-base-boat-cleat-sold-in-pairs","title":"Perko 1188DP4CHR Chrome Plated Open Base Boat Cleat, 4 Inch, Sold in Pairs","description":"\u003cp\u003eThe Perko 1188DP4CHR is a 4 inch open base boat cleat finished in chrome plating over zinc. It is used for securing dock lines and mooring ropes to a boat's deck or a dock, and is sold as a pair (two cleats per package) under Perko's 1188 series. The cleat measures 4 inches overall in length with a base of 2-1\/8 inches by 1-1\/2 inches, and is sized to handle rope up to 5\/16 inch in diameter. Its mounting holes are spaced 1.5 inches center to center and are drilled for number 10 screws, making it straightforward to through-bolt or screw onto a flat mounting surface. The chrome-plated zinc construction gives the cleat a bright, corrosion-resistant finish that suits both fresh and saltwater boats, docks, and marine hardware applications where a polished look is wanted alongside durable holding power. This cleat belongs to Perko's 1188 series, which also includes 6 inch and 8 inch chrome plated open base cleats for boats and lines requiring larger rope sizes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1188DP4CHR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Open Base Boat Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Overall:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimensions:\u003c\/strong\u003e 2-1\/8 inches x 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Rope Size:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Holes, Center to Center:\u003c\/strong\u003e 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Size:\u003c\/strong\u003e #10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Sold in pairs (2 cleats per package)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.58 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow big is the Perko 1188DP4CHR cleat?\u003c\/strong\u003e The 1188DP4CHR measures 4 inches overall in length, with a base that is 2-1\/8 inches by 1-1\/2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cleats come in a package?\u003c\/strong\u003e The 1188DP4CHR is sold in pairs, so one package contains 2 chrome plated cleats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size rope does this cleat handle?\u003c\/strong\u003e This 4 inch Perko cleat is rated for a maximum rope size of 5\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat screw size is needed to mount this cleat?\u003c\/strong\u003e The 1188DP4CHR uses number 10 screws, with mounting holes spaced 1.5 inches apart center to center.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1188DP4CHR made of stainless steel?\u003c\/strong\u003e No, the Perko 1188DP4CHR is chrome plated zinc, not stainless steel, giving it a bright polished finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an open base or closed base cleat?\u003c\/strong\u003e The 1188DP4CHR is an open base cleat, part of Perko's 1188 series of chrome plated open base cleats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1188DP4CHR weigh?\u003c\/strong\u003e Each package of the Perko 1188DP4CHR weighs 0.58 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Perko make this cleat in other sizes?\u003c\/strong\u003e Yes, the same open base chrome plated cleat design is available from Perko in 6 inch and 8 inch overall lengths in addition to this 4 inch 1188DP4CHR.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 1188DP4CHR finish?\u003c\/strong\u003e The 1188DP4CHR has a silver, chrome plated finish over its zinc construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mounting hole spacing on this cleat?\u003c\/strong\u003e The 1188DP4CHR has mounting holes spaced 1.5 inches center to center, drilled for number 10 screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1188DP4CHR suitable for dock or boat use?\u003c\/strong\u003e Yes, this Perko 4 inch chrome plated cleat is designed for securing mooring and dock lines on boats and docks.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991120785627,"sku":"PKO-1188DP4CHR","price":39.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41KPH43KWQL.jpg?v=1784491987"},{"product_id":"perko-1223dp0chr-skene-bow-chocks-chrome-plated-matched-port-starboard-pair-for-rope-up-to-1-2-inch","title":"Perko 1223DP0CHR Skene Bow Chocks, Chrome Plated, 3-1\/2 Inch, Sold in Pairs","description":"\u003cp\u003eThe Perko 1223DP0CHR Skene Bow Chocks are a matched pair of deck hardware fittings designed to guide and secure mooring or dock lines as they run over the edge of a boat's deck or bow. Each chock is built from zinc alloy with a chrome plated finish, giving it a bright, corrosion-resistant surface that holds up to marine exposure while blending in with other polished deck hardware. The smooth, curved horn shape reduces chafing and wear on rope as the boat shifts at the dock or mooring, helping lines last longer and run more smoothly under load. This chock is sized for rope up to 1\/2 inch in diameter, with an overall length of 3-1\/2 inches and a width of 7\/8 inch, making it a compact fit for smaller cleats, bow rails, and gunwale mounting points. It mounts with #8 screws (sold separately), keeping installation straightforward with a drill and screwdriver. The Perko 1223DP0CHR is sold as a matched port and starboard pair, so a single order outfits both sides of the bow or deck with a consistent look and equal wear characteristics on each side.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1223DP0CHR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Skene Bow Chocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Rope Size:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Overall:\u003c\/strong\u003e 3-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Size:\u003c\/strong\u003e #8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold in pairs (Port and Starboard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226376634\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the Perko 1223DP0CHR?\u003c\/strong\u003e The Perko 1223DP0CHR ships as a matched pair of Skene bow chocks, one for the port side and one for the starboard side, so a single order outfits both sides of the bow or deck. Mounting screws are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rope size does this chock accommodate?\u003c\/strong\u003e The Perko 1223DP0CHR is rated for rope up to 1\/2 inch in diameter, which covers most standard dock and mooring lines used on smaller to mid-size boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Perko 1223DP0CHR bow chock?\u003c\/strong\u003e Each chock measures 3-1\/2 inches in overall length and 7\/8 inch in width, making it a compact fit suited to smaller mounting areas on the bow or gunwale.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Perko 1223DP0CHR made from?\u003c\/strong\u003e This bow chock is made from zinc alloy with a chrome plated finish, giving it a bright, corrosion-resistant surface for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Perko 1223DP0CHR weigh?\u003c\/strong\u003e The pair of Skene bow chocks weighs 0.3 pounds total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat screws are needed to install the Perko 1223DP0CHR?\u003c\/strong\u003e The chocks mount using #8 screws, which are sold separately and not included with the 1223DP0CHR.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko 1223DP0CHR easy to install?\u003c\/strong\u003e Yes, the Skene bow chocks mount with a simple screw-in installation using #8 screws, requiring only a drill and screwdriver to fasten each chock in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the chrome finish on the Perko 1223DP0CHR resist corrosion?\u003c\/strong\u003e The chrome plated finish over the zinc alloy body is designed to resist corrosion in marine environments while keeping a polished appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I order just one Perko 1223DP0CHR chock instead of a pair?\u003c\/strong\u003e No, the 1223DP0CHR is sold only as a matched port and starboard pair, not as an individual chock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the purpose of a Skene-style bow chock like the Perko 1223DP0CHR?\u003c\/strong\u003e A Skene bow chock guides mooring or dock lines over the edge of the deck while reducing chafing and unwanted movement of the rope, helping protect the line from wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Perko 1223DP0CHR match other chrome plated Perko deck hardware?\u003c\/strong\u003e Yes, the chrome plated finish on the 1223DP0CHR is designed to coordinate with other chrome plated Perko deck and cabinet hardware for a consistent look.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991120851163,"sku":"PKO-1223DPCHR","price":15.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-1223DPCHR_lg__39461.1558117692.500.750.jpg?v=1785188998"},{"product_id":"perko-6-1-2-open-base-cleat-chrome-plated-zinc-mpn-1252dp0chr-sold-in-pairs","title":"Perko Open Base Cleat 1252DP0CHR, Aluminum, 3\/4 Inch Max Rope Size, Sold in Pairs","description":"\u003cp\u003eThe Perko Open Base Cleat, part number 1252DP0CHR, is a machined aluminum deck cleat used for securing dock lines and mooring ropes aboard a boat. It uses an open base design, which allows the cleat to be through-bolted to a deck or gunwale while leaving the underside of the horns accessible for wrapping and cleating off a line quickly. The cleat is built from aluminum with a plain finish and is rated for rope up to 3\/4 inch in diameter, making it suitable for mooring and docking lines commonly used on recreational boats. Each unit weighs 0.85 pounds and measures approximately 6.5 inches in length by 3 inches in width, sizing it for standard deck or rail mounting locations where a mid-size cleat is needed.\u003c\/p\u003e\u003cp\u003eThis cleat is sold as a retail two-pack under part number 1252DP0CHR. Perko also offers the same cleat under OEM bulk package part number 1252000CHR for buyers who purchase in volume rather than in a retail two-pack. The open base style and aluminum construction make this cleat a straightforward choice for boat owners replacing a worn or broken cleat, or adding a second mooring point on deck.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1252DP0CHR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Plain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Rope Size:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Sold in pairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 6.5 inches L x 3 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.85 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Bulk Package Part Number:\u003c\/strong\u003e 1252000CHR\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum rope size for the Perko 1252DP0CHR cleat?\u003c\/strong\u003e The Perko 1252DP0CHR open base cleat is rated for rope up to 3\/4 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Perko 1252DP0CHR cleat made from?\u003c\/strong\u003e This cleat is made from aluminum with a plain finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cleats come in one package?\u003c\/strong\u003e Part number 1252DP0CHR is a retail package sold in pairs, so one package includes two cleats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Perko 1252DP0CHR cleat?\u003c\/strong\u003e The cleat measures approximately 6.5 inches in length by 3 inches in width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Perko 1252DP0CHR cleat weigh?\u003c\/strong\u003e Each cleat weighs 0.85 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a bulk packaging option for this cleat?\u003c\/strong\u003e Yes, Perko offers the same cleat under OEM bulk package part number 1252000CHR for buyers purchasing in volume, in addition to the retail two-pack 1252DP0CHR.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'open base' mean for this cleat design?\u003c\/strong\u003e An open base cleat has a mounting base with an open underside, which is the design used on the Perko 1252DP0CHR, allowing the cleat to be through-bolted to a deck or rail surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko 1252DP0CHR cleat suitable for mooring lines?\u003c\/strong\u003e Yes, this aluminum open base cleat is sized for docking and mooring lines up to 3\/4 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Perko 1252DP0CHR cleat have?\u003c\/strong\u003e This cleat has a plain aluminum finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Perko 1252DP0CHR cleat be used to replace a worn or broken deck cleat?\u003c\/strong\u003e Yes, the 1252DP0CHR is a standard open base aluminum cleat suitable for replacing a worn or broken cleat of similar size and rope capacity.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991121146075,"sku":"PKO-1252DP0CHR","price":51.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-1252DPCHR_lg__35622.1558118259.500.750.jpg?v=1785189222"},{"product_id":"gen3-marine-12-aluminum-s-dock-cleat-corrosion-resistant-wide-base-boat-cleat-silver","title":"Gen3 Marine 12 Inch Aluminum S Dock Cleat, Galvanized Finish, Corrosion Resistant","description":"\u003cp\u003eThe Gen3 Marine 12 Inch Aluminum S Dock Cleat is a deck and dock hardware fitting used to secure dock lines on recreational boats and docks. Its S-shaped horn design lets you loop a dock line around the cleat quickly and hold it firmly in place, making it easy to tie off or release a line without fighting the hardware. The cleat is built from galvanized aluminum, giving it corrosion resistance for use in both saltwater and freshwater environments, so it holds up to ongoing exposure without the finish breaking down.\u003c\/p\u003e\u003cp\u003eThe base uses an extra-wide footprint of approximately 6 inches (15 cm), which spreads mounting stress across a larger area for a stronger, more stable hold when a line is under load. The mounting hole is recessed into the cleat body, which keeps the line off the mounting hardware and reduces chafing and fraying at the point where the line passes over the base. The cleat has a silver finish and is sized at 12 inches overall, making it suited for securing mooring or dock lines on recreational boats, docks, and similar marine or waterfront applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-7026\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dock Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e S-shaped horn cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Footprint:\u003c\/strong\u003e Approximately 6 inches (15 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Recessed mounting hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Dock Cleat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Gen3 Marine 5-7026 dock cleat used for?\u003c\/strong\u003e It is a 12 inch aluminum S dock cleat used to secure dock lines on recreational boats and docks, letting you loop and tie off a mooring line around its S-shaped horns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this dock cleat?\u003c\/strong\u003e The Gen3 Marine 5-7026 is 12 inches long overall, with an extra-wide base footprint of approximately 6 inches (15 cm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the cleat made from?\u003c\/strong\u003e It is made from galvanized aluminum, which is corrosion resistant for use in both saltwater and freshwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat rust or corrode over time?\u003c\/strong\u003e The galvanized aluminum construction of part number 5-7026 is corrosion resistant, so it is built to hold up in marine environments without rusting the way untreated steel would.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the mounting hole recessed?\u003c\/strong\u003e The recessed mounting hole on the 5-7026 dock cleat keeps the dock line from rubbing directly against the mounting hardware, which reduces chafing and fraying of the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the wide base footprint matter for installation?\u003c\/strong\u003e Yes, the approximately 6 inch (15 cm) wide base spreads mounting stress over a larger area, giving the cleat added strength and a more stable, secure hold once installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this cleat come in?\u003c\/strong\u003e The Gen3 Marine 12 inch S dock cleat has a silver finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat suitable for both boats and docks?\u003c\/strong\u003e Yes, the 5-7026 is designed for securing recreational boats to docks and can be mounted on dock structures as well.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this dock cleat weigh?\u003c\/strong\u003e The Gen3 Marine 5-7026 dock cleat weighs 0.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this cleat?\u003c\/strong\u003e The package includes one Gen3 Marine 5-7026 aluminum S dock cleat.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991689572571,"sku":"GEN-5-7026","price":2.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41meScPmNoL.jpg?v=1784509926"},{"product_id":"gen3-marine-6-galvanized-dock-cleat-corrosion-resistant-boat-mooring-cleat-for-fresh-saltwater-docks","title":"Gen3 Marine 6 Inch Galvanized Dock Cleat for Boats","description":"\u003cp\u003eThe Gen3 Marine 6 Inch Galvanized Dock Cleat is a compact mooring cleat designed for securing small to medium-sized boats to a dock, piling, or seawall. Constructed from galvanized iron, the cleat carries a durable galvanized finish that resists rust and corrosion, making it suitable for long-term outdoor use in both freshwater and saltwater environments. The horn-and-base design provides smooth edges to help protect dock lines from fraying or chafing during repeated use, and the cleat is sized to accommodate a range of dock line diameters.\u003c\/p\u003e\u003cp\u003eMeasuring 6 inches in overall length, this cleat is a practical choice for docks, swim platforms, small craft, and utility mounting points where a compact, economical cleat is needed. It mounts with through-bolts (not included) to a flat deck or dock surface.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-8003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Dock Cleats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6 x 0.75 x 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 6 x 2 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037462159\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is this dock cleat suited for?\u003c\/strong\u003e The Gen3 Marine 5-8003 is a 6 inch cleat suited for small to medium-sized boats, making it a good fit for dinghies, small runabouts, and utility docking points rather than larger vessels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the dock cleat made of?\u003c\/strong\u003e It is made from galvanized iron, which gives the Gen3 Marine 5-8003 cleat resistance to rust and corrosion for long-term outdoor use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used in saltwater?\u003c\/strong\u003e Yes, the galvanized finish on the 5-8003 cleat is suitable for both freshwater and saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the exact dimensions of this cleat?\u003c\/strong\u003e The Gen3 Marine 6 inch dock cleat measures 6 x 0.75 x 1.25 inches as an individual item, with an overall horn-to-horn length of 6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this dock cleat weigh?\u003c\/strong\u003e The 5-8003 dock cleat weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat cause fraying on my dock lines?\u003c\/strong\u003e No, the 5-8003 cleat is designed with smooth edges to help reduce wear and fraying on dock lines during regular use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size dock lines can this cleat handle?\u003c\/strong\u003e The Gen3 Marine 6 inch cleat is designed to handle different sizes of dock lines typical of small to medium-sized boat mooring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cleat come with mounting hardware?\u003c\/strong\u003e Mounting hardware is not specified as included with the Gen3 Marine 5-8003 dock cleat; it is designed to be through-bolted to a dock or deck surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does this cleat have?\u003c\/strong\u003e The 5-8003 cleat has a silver galvanized finish that also provides corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat suitable for permanent outdoor installation?\u003c\/strong\u003e Yes, the galvanized iron construction of the Gen3 Marine 5-8003 is built for durable, long-term outdoor exposure at the dock or on a boat.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991692882139,"sku":"GEN-5-8003","price":1.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41EU2NGDxxL.jpg?v=1784509984"},{"product_id":"gen3-marine-8-galvanized-dock-cleat-corrosion-resistant-boat-cleat-for-docks-and-small-craft-mpn-5-8004","title":"Gen3 Marine 8 Inch Galvanized Dock Cleat for Boats and Docks","description":"\u003cp\u003eThe Gen3 Marine 8 Inch Galvanized Dock Cleat is a heavy duty mooring cleat built for securing small recreational boats to a dock. It is finished in a galvanized coating that resists corrosion in both saltwater and freshwater environments, making it a durable choice for boaters who need a cleat that can stand up to constant exposure to the elements. The cleat measures 8 x 1.13 x 2 inches and weighs 1.2 pounds, sizing it for smaller boats and dock applications where a compact, low profile mooring point is needed.\u003c\/p\u003e\u003cp\u003eDesign details include smooth edges along the horns and base, which help protect dock lines from abrasion and premature wear as lines are cleated and uncleated. The open horn shape is sized to accommodate different diameters of dock line, so it is not limited to a single rope size. Mount it to a dock, piling, or boat deck using appropriate fasteners through the base to create a secure tie off point for mooring or docking lines.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-8004\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dock Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 8 x 1.13 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge Design:\u003c\/strong\u003e Smooth edges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironment Rating:\u003c\/strong\u003e Freshwater and saltwater compatible\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Gen3 Marine dock cleat, part number 5-8004?\u003c\/strong\u003e The Gen3 Marine dock cleat, part number 5-8004, measures 8 x 1.13 x 2 inches and weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used in saltwater?\u003c\/strong\u003e Yes, the galvanized finish on the Gen3 Marine 5-8004 dock cleat is compatible with both saltwater and freshwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cleat made from or finished with?\u003c\/strong\u003e The Gen3 Marine 5-8004 cleat has a galvanized finish, which provides corrosion resistance for outdoor and marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat work with different sizes of dock line?\u003c\/strong\u003e The 5-8004 cleat is designed to handle different sizes of dock lines, so it is not limited to a single rope diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cleat have sharp edges that could wear down my lines?\u003c\/strong\u003e No, the Gen3 Marine 5-8004 cleat features smooth edges designed to protect dock lines from abrasion during use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat suitable for small recreational boats?\u003c\/strong\u003e Yes, the 8 inch Gen3 Marine dock cleat is sized for small recreational boats and general dock applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Gen3 Marine 5-8004 dock cleat weigh?\u003c\/strong\u003e It weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the mounting dimensions of this cleat?\u003c\/strong\u003e The Gen3 Marine 5-8004 dock cleat has overall dimensions of 8 x 1.13 x 2 inches (length x width x height).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs hardware included with the dock cleat?\u003c\/strong\u003e The dossier for the Gen3 Marine 5-8004 cleat does not specify included mounting hardware; only the cleat itself is confirmed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is this dock cleat?\u003c\/strong\u003e This is a Gen3 Marine dock cleat, part number 5-8004.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991693340891,"sku":"GEN-5-8004","price":3.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41EU2NGDxxL_c04d1bac-119b-431b-b99e-d73f56da5cd6.jpg?v=1784509991"},{"product_id":"gen3-marine-14-galvanized-dock-cleat-corrosion-resistant-boat-and-dock-cleat-for-saltwater-and-freshwater","title":"Gen3 Marine 14 Inch Galvanized Dock Cleat","description":"\u003cp\u003eThe Gen3 Marine 14 Inch Galvanized Dock Cleat is a heavy duty mooring cleat built for securing recreational boats to docks and pilings. It carries a galvanized finish that resists corrosion in both saltwater and freshwater environments, making it a durable choice for boaters who need a cleat that holds up to repeated exposure to the elements. The cleat measures 14 x 2 x 3.25 inches and weighs 5.2 pounds, giving it the size and heft to handle mooring and dock line duty on small to mid-size recreational boats.\u003c\/p\u003e\u003cp\u003eSmooth, rounded edges are built into the design to protect dock lines from fraying or chafing as they are cinched down and released, extending the life of your lines. The horn shape and sizing are capable of handling different sizes of dock lines, so it works whether you are tying off a smaller runabout or a larger recreational boat. Mounting hardware is not included, so plan to source bolts appropriately sized for the cleat's base holes and your dock or deck thickness.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-8007\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 3.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037462197\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironment:\u003c\/strong\u003e Freshwater and saltwater compatible\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Gen3 Marine dock cleat, part number 5-8007?\u003c\/strong\u003e It measures 14 x 2 x 3.25 inches and weighs 5.2 pounds, sized for mooring small to mid-size recreational boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat hold up in saltwater?\u003c\/strong\u003e Yes, the 5-8007 cleat has a galvanized finish that is corrosion resistant in both saltwater and freshwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cleat have sharp edges that could wear down my dock lines?\u003c\/strong\u003e No, the Gen3 Marine 5-8007 cleat is designed with smooth edges to protect dock lines from fraying or wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size dock line can I use with this cleat?\u003c\/strong\u003e The 14 inch Gen3 Marine dock cleat is capable of handling different sizes of dock lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with the 5-8007 dock cleat?\u003c\/strong\u003e Mounting hardware is not specified as included, so bolts should be sourced separately to match the cleat's base holes and mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cleat made of?\u003c\/strong\u003e The Gen3 Marine 5-8007 cleat has a heavy duty galvanized finish built for durability in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat suitable for docks as well as boats?\u003c\/strong\u003e Yes, the Gen3 Marine 14 inch dock cleat is designed for use on both docks and small recreational boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight does the 5-8007 cleat add to my dock or boat?\u003c\/strong\u003e At 5.2 pounds, the cleat is heavy duty without being oversized for typical recreational applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Gen3 Marine 14 Inch Galvanized Dock Cleat, part number 5-8007, has UPC 810037462197.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 5-8007 a genuine Gen3 Marine part?\u003c\/strong\u003e Yes, this is a genuine Gen3 Marine dock cleat identified by manufacturer part number 5-8007.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991694553307,"sku":"GEN-5-8007","price":11.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41EU2NGDxxL_eb36c2db-5c2a-49b0-8724-5e9f46298fc0.jpg?v=1784510018"},{"product_id":"gen3-marine-10-galvanized-dock-cleat-5-8005-corrosion-resistant-boat-dock-cleat-for-fresh-and-saltwater","title":"Gen3 Marine 10 Inch Galvanized Dock Cleat","description":"\u003cp\u003eThe Gen3 Marine 10 Inch Galvanized Dock Cleat is a heavy duty mooring cleat built for securing recreational boats to docks, pilings, and swim platforms. Constructed with a galvanized finish, this cleat resists corrosion in both saltwater and freshwater environments, making it a reliable choice for boaters who dock in a variety of conditions. The cleat measures 10 x 1.5 x 2.5 inches and weighs 2.1 pounds, giving it enough mass and surface area to handle everyday docking loads without flexing or pulling loose from properly fastened mounting hardware.\u003c\/p\u003e\u003cp\u003eSmooth edges are machined into the horns and base of the cleat so that dock lines are protected from fraying or chafing as they are tied off, cleated, or released during routine dockside use. The open horn design accommodates different sizes of dock lines, from smaller fender lines to heavier mooring lines, giving boat owners flexibility without needing multiple cleat styles. Its compact 10 inch length makes it suitable for mounting on gunwales, docks, swim platforms, or other flat surfaces where a dependable tie-off point is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-8005\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dock Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge Type:\u003c\/strong\u003e Smooth edges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Compatibility:\u003c\/strong\u003e Freshwater and saltwater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037462173\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Gen3 Marine 10 Inch Galvanized Dock Cleat?\u003c\/strong\u003e This dock cleat measures 10 x 1.5 x 2.5 inches and weighs 2.1 pounds, making the 5-8005 a compact cleat sized for gunwales, docks, and swim platforms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat safe to use in saltwater?\u003c\/strong\u003e Yes, the Gen3 Marine 5-8005 has a galvanized finish that is corrosion resistant in both saltwater and freshwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the dock cleat made from?\u003c\/strong\u003e The 5-8005 is made from galvanized steel, giving it a durable, corrosion resistant finish suited for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat damage or fray my dock lines?\u003c\/strong\u003e No, the Gen3 Marine dock cleat is designed with smooth edges on the horns and base specifically to protect dock lines from chafing or fraying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size dock lines can this cleat handle?\u003c\/strong\u003e The 5-8005 cleat is capable of handling different sizes of dock lines, from lighter fender lines to heavier mooring lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this dock cleat?\u003c\/strong\u003e Each purchase includes one Gen3 Marine 10 Inch Galvanized Dock Cleat (part number 5-8005); mounting hardware is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can this dock cleat be mounted?\u003c\/strong\u003e The 10 inch Gen3 Marine cleat can be mounted on flat surfaces such as boat gunwales, docks, or swim platforms wherever a secure tie-off point is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 5-8005 cleat suitable for small recreational boats?\u003c\/strong\u003e Yes, this galvanized dock cleat is sized and rated for small recreational boats and dock applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight does the dock cleat add?\u003c\/strong\u003e The Gen3 Marine 5-8005 dock cleat weighs 2.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cleat come pre-finished or does it need additional coating?\u003c\/strong\u003e The 5-8005 ships with a galvanized finish already applied, so no additional coating is required for corrosion resistance.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991694848219,"sku":"GEN-5-8005","price":4.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41EU2NGDxxL_621a701d-2361-475c-aa93-52dd29ecba87.jpg?v=1784510020"},{"product_id":"gen3-marine-12-galvanized-dock-cleat-corrosion-resistant-boat-dock-cleat-for-saltwater-and-freshwater","title":"Gen3 Marine 12 Inch Galvanized Dock Cleat for Boats and Docks","description":"\u003cp\u003eThe Gen3 Marine 12 Inch Galvanized Dock Cleat is a heavy duty mooring cleat built for securing dock lines on small recreational boats and docks. Constructed with a galvanized finish, this cleat resists corrosion and holds up to extended exposure in both saltwater and freshwater environments. The horn design features smooth edges that protect dock lines from abrasion and fraying during repeated use, and the cleat is sized to accommodate different sizes of dock lines, making it a practical choice for a range of boats and dock setups.\u003c\/p\u003e\u003cp\u003eThis cleat is intended for mounting to a dock, pier, or boat deck as a secure point for tying off mooring or dock lines. Its galvanized steel construction provides durability against the elements, and the compact 12 inch footprint makes it suitable for smaller vessels and dock applications where space is limited.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-8006\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dock Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1.88 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironment:\u003c\/strong\u003e Freshwater and saltwater compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037462180\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Gen3 Marine dock cleat?\u003c\/strong\u003e The Gen3 Marine dock cleat (part number 5-8006) measures 12 inches long, 1.88 inches wide, and 3 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat hold up in saltwater?\u003c\/strong\u003e Yes, the galvanized finish on the Gen3 Marine 5-8006 dock cleat is corrosion resistant and made to last in both saltwater and freshwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the dock cleat weigh?\u003c\/strong\u003e The Gen3 Marine 5-8006 dock cleat weighs 3.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the cleat made of?\u003c\/strong\u003e This cleat is made of galvanized steel, which provides a durable, corrosion resistant finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat handle different sizes of dock line?\u003c\/strong\u003e Yes, the Gen3 Marine 5-8006 is capable of handling different sizes of dock lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the cleat damage my dock lines?\u003c\/strong\u003e No, the 5-8006 cleat is designed with smooth edges to protect dock lines from abrasion and fraying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this dock cleat used for?\u003c\/strong\u003e The Gen3 Marine 5-8006 is used to secure mooring and dock lines on small recreational boats and docks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat suitable for small boats?\u003c\/strong\u003e Yes, the 12 inch Gen3 Marine dock cleat is a good choice for small recreational boats and docks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the cleat have?\u003c\/strong\u003e The Gen3 Marine 5-8006 dock cleat has a galvanized finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this dock cleat?\u003c\/strong\u003e The UPC for the Gen3 Marine 5-8006 dock cleat is 810037462180.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991695012059,"sku":"GEN-5-8006","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41EU2NGDxxL_31a04767-493e-4cfd-bdb9-1f1d7b1526c9.jpg?v=1784510025"},{"product_id":"gen3-marine-8-heavy-duty-galvanized-dock-cleat-for-boats-docks-piers","title":"Gen3 Marine Heavy Duty Galvanized 8 Inch Dock Cleat","description":"\u003cp\u003eThe Gen3 Marine Heavy Duty Dock Cleat is an 8 inch galvanized cleat built for securing lines on docks, piers, and boats. Its galvanized finish resists rust and corrosion, allowing the cleat to hold up in both freshwater and saltwater environments. Constructed from marine grade metal, this cleat is designed for heavy duty use where a dependable tie-off point is needed.\u003c\/p\u003e\u003cp\u003eThis dock cleat measures 8 x 2.25 x 3 inches and weighs 3 pounds, giving it enough mass and surface area for a secure mounting base while remaining a practical size for smaller docks and boats. It is well suited for small boats, jet skis, and kayaks, as well as general dock and pier use, making it a versatile addition anywhere a reliable cleat is required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-8014\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized marine grade metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Compatibility:\u003c\/strong\u003e Freshwater and saltwater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037462203\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Gen3 Marine dock cleat, part number 5-8014?\u003c\/strong\u003e The Gen3 Marine dock cleat 5-8014 measures 8 x 2.25 x 3 inches and weighs 3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this dock cleat be used in saltwater?\u003c\/strong\u003e Yes, the galvanized finish on dock cleat 5-8014 is designed to hold up in both freshwater and saltwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the dock cleat made of?\u003c\/strong\u003e Dock cleat 5-8014 is made of galvanized marine grade metal, chosen for its resistance to rust and corrosion in marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat suitable for jet skis and kayaks?\u003c\/strong\u003e Yes, the 8 inch size of the Gen3 Marine dock cleat 5-8014 makes it a good fit for small boats, jet skis, and kayaks, in addition to docks and piers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Gen3 Marine 5-8014 dock cleat weigh?\u003c\/strong\u003e This dock cleat weighs 3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 5-8014 dock cleat have?\u003c\/strong\u003e It has a galvanized finish, which is applied to resist rust and corrosion in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can this dock cleat be installed?\u003c\/strong\u003e The Gen3 Marine dock cleat 5-8014 can be installed on docks, piers, and boats wherever a secure tie-off point for lines is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the dock cleat heavy duty?\u003c\/strong\u003e Yes, dock cleat 5-8014 is built with heavy duty construction for marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Gen3 Marine 5-8014 dock cleat?\u003c\/strong\u003e The UPC for this dock cleat is 810037462203.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this dock cleat a genuine Gen3 Marine product?\u003c\/strong\u003e Yes, part number 5-8014 is a genuine Gen3 Marine heavy duty dock cleat, not an aftermarket copy.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991695044827,"sku":"GEN-5-8014","price":43.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/412a2pqS7nL.jpg?v=1784510029"},{"product_id":"gen3-marine-10-heavy-duty-galvanized-dock-cleat-for-docks-piers-boats","title":"Gen3 Marine Heavy Duty Galvanized 10 Inch Dock Cleat","description":"\u003cp\u003eThe Gen3 Marine Heavy Duty Dock Cleat is a 10 inch galvanized cleat built to secure lines on docks, piers, and boats in both freshwater and saltwater environments. Its galvanized finish resists rust and corrosion, giving it the durability needed to stand up to changing marine conditions over time. Constructed from marine grade metal, this cleat is built for heavy duty use, making it a dependable choice for tying off larger boats as well as smaller watercraft.\u003c\/p\u003e\u003cp\u003eThis dock cleat is a versatile addition to any dock, pier, or boat, and works well for small boats, kayaks, jet skis, and more. Whether mounted on a fixed dock structure or the deck of a boat, it provides a solid, secure point for cleating off dock lines and fenders. The heavy duty galvanized construction is intended to hold up to the demands of regular marine use without sacrificing strength or reliability.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-8015\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 10 x 2.5 x 3.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine Grade Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironment:\u003c\/strong\u003e Freshwater and Saltwater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037462210\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Gen3 Marine Dock Cleat (5-8015)?\u003c\/strong\u003e The Gen3 Marine Dock Cleat, part number 5-8015, measures 10 x 2.5 x 3.25 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this dock cleat weigh?\u003c\/strong\u003e The Gen3 Marine 5-8015 dock cleat weighs 5.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used in saltwater?\u003c\/strong\u003e Yes, the Gen3 Marine 5-8015 dock cleat is suitable for both freshwater and saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the dock cleat made of?\u003c\/strong\u003e This cleat is made of marine grade metal with a galvanized finish, part number 5-8015 from Gen3 Marine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the galvanized finish resist rust and corrosion?\u003c\/strong\u003e Yes, the galvanized finish on the Gen3 Marine 5-8015 dock cleat is designed to resist rust and corrosion in marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat suitable for small boats, kayaks, and jet skis?\u003c\/strong\u003e Yes, the Gen3 Marine 5-8015 dock cleat works well for small boats, kayaks, jet skis, and similar watercraft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can this dock cleat be installed?\u003c\/strong\u003e The Gen3 Marine 5-8015 dock cleat can be added to a dock, pier, or boat for securing dock lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 5-8015 cleat considered heavy duty?\u003c\/strong\u003e Yes, this cleat features heavy duty construction intended to hold up in marine environments, part number 5-8015 from Gen3 Marine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes this dock cleat?\u003c\/strong\u003e This dock cleat is made by Gen3 Marine, part number 5-8015.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Gen3 Marine dock cleat?\u003c\/strong\u003e The UPC for the Gen3 Marine 5-8015 dock cleat is 810037462210.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991695601883,"sku":"GEN-5-8015","price":10.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/412a2pqS7nL_8cd86350-e2c9-4f93-9ee5-fd3ec2d94652.jpg?v=1784510043"},{"product_id":"gen3-marine-12-heavy-duty-galvanized-dock-cleat-for-freshwater-and-saltwater","title":"Gen3 Marine Heavy Duty Galvanized Dock Cleat, 12 Inch","description":"\u003cp\u003eThe Gen3 Marine Heavy Duty Dock Cleat is a 12 inch galvanized cleat built for securing boats, jet skis, kayaks, and other watercraft to a dock, pier, or piling. The galvanized finish resists rust and corrosion in both freshwater and saltwater environments, making it a durable choice for marine use in changing conditions. Constructed from marine grade metal, the cleat is designed to stand up to the ongoing stress of mooring lines and repeated dockings without weakening over time.\u003c\/p\u003e\u003cp\u003eThis cleat is a straightforward, heavy duty upgrade for any dock or pier that needs a reliable tie-off point. Its size and weight give it the holding strength needed for small boats and personal watercraft, and its simple bolt-down design makes it easy to add to existing dock structures. Whether replacing a worn cleat or outfitting a new dock, the Gen3 Marine Heavy Duty Dock Cleat provides a dependable point of attachment for mooring and docking lines.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-8016\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Dock Cleats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 12 x 2.5 x 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine grade metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironment Rating:\u003c\/strong\u003e Freshwater and saltwater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037462227\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Gen3 Marine Heavy Duty Dock Cleat?\u003c\/strong\u003e The Gen3 Marine Heavy Duty Dock Cleat (part number 5-8016) measures 12 x 2.5 x 3.5 inches, making it a 12 inch cleat suitable for docks, piers, and pilings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used in saltwater?\u003c\/strong\u003e Yes, the 5-8016 dock cleat is rated for both freshwater and saltwater environments thanks to its galvanized finish, which resists rust and corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the dock cleat weigh?\u003c\/strong\u003e It weighs 10.4 pounds, giving the Gen3 Marine 5-8016 cleat a solid, heavy duty feel for secure mooring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the dock cleat made of?\u003c\/strong\u003e The Gen3 Marine Heavy Duty Dock Cleat is made from marine grade metal with a galvanized finish for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is this cleat suitable for?\u003c\/strong\u003e This 12 inch cleat is designed for small boats, jet skis, and kayaks, providing a secure tie-off point for lighter watercraft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat suitable for jet skis and kayaks?\u003c\/strong\u003e Yes, the 5-8016 cleat from Gen3 Marine is well suited to jet skis, kayaks, and similar small watercraft in addition to small boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the dock cleat come with mounting hardware?\u003c\/strong\u003e The dossier for the Gen3 Marine 5-8016 dock cleat does not specify included mounting hardware, so buyers should confirm fasteners are on hand for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat rust over time?\u003c\/strong\u003e The galvanized finish on the Gen3 Marine Heavy Duty Dock Cleat is specifically applied to resist rust and corrosion, even with regular saltwater or freshwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the best use for this dock cleat?\u003c\/strong\u003e The 12 inch Gen3 Marine dock cleat is intended for mooring and docking lines on any dock, pier, or piling, particularly for small boats and personal watercraft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a heavy duty cleat?\u003c\/strong\u003e Yes, at 10.4 pounds with marine grade metal construction, the Gen3 Marine 5-8016 is built as a heavy duty dock cleat for demanding marine use.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991696060635,"sku":"GEN-5-8016","price":17.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/412a2pqS7nL_236bcffd-f669-4560-95b6-c68c0137cf51.jpg?v=1784510053"},{"product_id":"gen3-marine-heavy-duty-15-galvanized-dock-cleat-for-boats-docks-and-piers","title":"Gen3 Marine Heavy Duty Galvanized Dock Cleat, 15 Inch","description":"\u003cp\u003eThe Gen3 Marine Heavy Duty Dock Cleat is a 15 inch galvanized cleat built for securing boats, jet skis, kayaks, and other watercraft to a dock, pier, or piling. Its galvanized finish resists rust and corrosion, allowing it to hold up in both freshwater and saltwater environments over repeated exposure to sun, spray, and moisture. The cleat is made from marine grade metal with heavy duty construction designed to handle the strain of mooring and dock lines without deforming or loosening over time.\u003c\/p\u003e\u003cp\u003eThis dock cleat is well suited for small to mid-size boats, jet skis, kayaks, and other watercraft that need a reliable tie-off point at a dock or pier. Its size and open horn design make it easy to cleat off standard dock lines quickly, whether for short-term tie-ups or long-term mooring. Because it is galvanized rather than painted or coated, the finish protects the base metal from the inside out rather than simply sitting on the surface, which helps it continue to perform after the cosmetic finish shows wear.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-8017\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 15 x 3.25 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized marine grade metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironment Rating:\u003c\/strong\u003e Freshwater and saltwater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Dock Cleats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Gen3 Marine dock cleat?\u003c\/strong\u003e The Gen3 Marine Heavy Duty Dock Cleat (5-8017) measures 15 inches long, with overall item dimensions of 15 x 3.25 x 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the dock cleat made of?\u003c\/strong\u003e This cleat is made from marine grade metal with a galvanized finish, which is designed for heavy duty use in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used in saltwater?\u003c\/strong\u003e Yes, the galvanized finish on the 5-8017 dock cleat is suitable for both freshwater and saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the dock cleat weigh?\u003c\/strong\u003e The Gen3 Marine 15 inch dock cleat weighs 13.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is this cleat designed for?\u003c\/strong\u003e This 15 inch cleat is well suited for small boats, jet skis, and kayaks, and works well on docks, piers, or similar mounting surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat rust over time?\u003c\/strong\u003e The galvanized finish on the 5-8017 cleat is specifically intended to resist rust and corrosion in marine conditions, unlike an uncoated or painted cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat heavy duty enough for regular mooring use?\u003c\/strong\u003e Yes, the Gen3 Marine dock cleat features heavy duty construction intended for regular use securing boats and other watercraft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this dock cleat?\u003c\/strong\u003e Ordering the Gen3 Marine 5-8017 dock cleat includes one 15 inch galvanized cleat; mounting hardware is not specified as included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can this dock cleat be installed?\u003c\/strong\u003e The 5-8017 cleat can be mounted on a dock, pier, or boat wherever a secure tie-off point for mooring lines is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Gen3 Marine cleat have?\u003c\/strong\u003e It has a galvanized finish, chosen specifically for its resistance to rust and corrosion in marine environments.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991696650459,"sku":"GEN-5-8017","price":23.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/412a2pqS7nL_931e925e-f88a-4cfa-8419-ba1528dae6ba.jpg?v=1784510058"},{"product_id":"gen3-marine-10-aluminum-s-dock-cleat-corrosion-resistant-extra-wide-footprint-for-boats-and-docks","title":"Gen3 Marine 10 Inch Aluminum S Dock Cleat, Part 5-8025, Corrosion Resistant, Extra Wide Base","description":"\u003cp\u003eThe Gen3 Marine 10 Inch Aluminum S Dock Cleat (part number 5-8025) is a deck-mounted cleat designed for securing dock lines on recreational boats and docks. Its S-shaped horn profile makes it easy to loop and unloop dock lines quickly, giving boaters a dependable point to tie off at the slip or along a dock edge. The cleat is built from aluminum with a galvanized finish, which resists corrosion in both saltwater and freshwater environments so the cleat holds up to repeated marine exposure without heavy maintenance.\u003c\/p\u003e\u003cp\u003eThe base of the cleat has an extra-wide footprint, approximately 6 inches (15 cm), which spreads mounting stress over a larger area for a more stable, secure installation compared to narrow-base cleats. The mounting hole is recessed into the base, which keeps the dock line clear of the fastener head and reduces chafing and fraying where the line crosses the cleat. The cleat has a silver finish that matches typical marine hardware. At 10 inches long, it suits a range of dock and boat mounting locations where a mid-to-large cleat is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-8025\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dock Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e S-shape horn\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Footprint:\u003c\/strong\u003e Approximately 6 inches (15 cm), extra-wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized, corrosion resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole:\u003c\/strong\u003e Recessed, chafe-reducing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Gen3 Marine 5-8025 dock cleat used for?\u003c\/strong\u003e The Gen3 Marine 5-8025 is a 10 inch aluminum S dock cleat used to secure dock lines on recreational boats and docks, letting a line be looped around the horns and tied off securely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 5-8025 dock cleat made from?\u003c\/strong\u003e It is made from aluminum with a galvanized finish, which is chosen for its corrosion resistance in both saltwater and freshwater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this dock cleat?\u003c\/strong\u003e The Gen3 Marine 5-8025 measures 10 inches in length, with a base footprint of approximately 6 inches (15 cm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 5-8025 dock cleat weigh?\u003c\/strong\u003e It weighs 1.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat rust in saltwater?\u003c\/strong\u003e No, the aluminum construction with a galvanized finish on the 5-8025 is designed to resist corrosion in saltwater and freshwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Gen3 Marine 5-8025 cleat?\u003c\/strong\u003e It has a silver finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the base described as extra-wide?\u003c\/strong\u003e The 5-8025 has an extra-wide base, approximately 6 inches (15 cm), which adds strength and stability so the mount holds securely under load from dock lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the mounting hole cause the line to chafe?\u003c\/strong\u003e The mounting hole on this cleat is recessed, which keeps the dock line away from the fastener and reduces chafing and fraying over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this cleat?\u003c\/strong\u003e The package includes one Gen3 Marine 10 inch aluminum S dock cleat (part 5-8025).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat suitable for both boats and docks?\u003c\/strong\u003e Yes, the 5-8025 S dock cleat is designed for mounting on either recreational boats or dock structures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape are the horns on this cleat?\u003c\/strong\u003e The 5-8025 uses an S-shaped horn design, which makes it easy to loop a dock line around for a secure hold.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991697174747,"sku":"GEN-5-8025","price":9.74,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31NC55genOL.jpg?v=1784510071"},{"product_id":"gen3-marine-12-aluminum-s-dock-cleat-corrosion-resistant-extra-wide-footprint","title":"Gen3 Marine 12 Inch Aluminum S Dock Cleat, Corrosion Resistant, Extra Wide Footprint","description":"\u003cp\u003eThe Gen3 Marine 12 Inch Aluminum S Dock Cleat is a docking hardware piece built to secure recreational boats and docks in both saltwater and freshwater environments. Made from aluminum, the cleat resists corrosion for long-term outdoor use at the dock or on deck.\u003c\/p\u003e\u003cp\u003eIts S-shaped horn design lets you loop a dock line around the cleat quickly and hold it securely, keeping your vessel in place. The base uses an extra-wide footprint, approximately 6 inches (15 cm), which spreads mounting stress across a larger area for a stronger, more stable hold when the cleat is fastened down. A recessed mounting hole is built into the design so the dock line sits away from the fastener, reducing chafing and fraying of the line over time.\u003c\/p\u003e\u003cp\u003eAt 12 inches long, this cleat suits boats and dock installations where a larger cleat is needed to handle line loads securely. It ships as a single dock cleat unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-8026\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dock Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Footprint Width:\u003c\/strong\u003e approximately 6 inches (15 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Design:\u003c\/strong\u003e Recessed, chafe-reducing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Dock Cleat (1)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Gen3 Marine 5-8026 dock cleat made of?\u003c\/strong\u003e The Gen3 Marine 5-8026 dock cleat is made of aluminum, chosen for its resistance to corrosion in both saltwater and freshwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this dock cleat?\u003c\/strong\u003e This Gen3 Marine dock cleat measures 12 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow wide is the base of the cleat?\u003c\/strong\u003e The base footprint of the Gen3 Marine 5-8026 dock cleat is approximately 6 inches (15 cm) wide, which is designed to add strength and stability to the mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat rust in saltwater?\u003c\/strong\u003e No, the Gen3 Marine 5-8026 is made of aluminum specifically to resist corrosion in saltwater and freshwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the recessed mounting hole do?\u003c\/strong\u003e The recessed mounting hole on the Gen3 Marine 5-8026 dock cleat protects the dock line from chafing and fraying by keeping the line away from the fastener, extending the line's usable life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat suitable for larger boats?\u003c\/strong\u003e At 12 inches long with an extra-wide base footprint, the Gen3 Marine 5-8026 cleat is sized for securing recreational boats that need a larger cleat to handle dock line loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this cleat come in?\u003c\/strong\u003e The Gen3 Marine 5-8026 dock cleat has a silver aluminum finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this dock cleat weigh?\u003c\/strong\u003e The Gen3 Marine 5-8026 dock cleat weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this cleat?\u003c\/strong\u003e An order of the Gen3 Marine 5-8026 includes one dock cleat unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is it called an S dock cleat?\u003c\/strong\u003e The Gen3 Marine 5-8026 gets its name from its S-shaped horn design, which makes it easy to loop a dock line around the cleat for a secure hold.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991697666267,"sku":"GEN-5-8026","price":15.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41meScPmNoL_cd05551e-1f73-4994-9726-2725c83e6259.jpg?v=1784510074"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/7485.jpg?v=1785356500","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-docking-fendering-dock-hardware-cleats.oembed?page=2","provider":"Good Vibes Marina","version":"1.0","type":"link"}