{"title":"Dock Bumpers \u0026 Ladders","description":null,"products":[{"product_id":"taylor-made-products-12-straight-mount-dock-wheel-mpn-1073-inflatable-dock-guard-made-in-usa","title":"Taylor Made Products 12 Inch Dock Wheel, Straight Mount, Galvanized Hardware","description":"\u003cp\u003eThe Taylor Made Products 12 Inch Dock Wheel (part number 1073) is a straight-mount dock wheel built to protect boats from rubbing and impact damage against the dock. The wheel rolls smoothly to cushion contact and reduce hull wear, and it features a molded-in valve so you can adjust internal air pressure to set the level of firmness that suits your dock and boat size. A large 2 inch diameter axle housing runs through the wheel for added strength under repeated use.\u003c\/p\u003e\u003cp\u003eThe mounting hardware is heavy-duty and hot-dipped galvanized, allowing it to be bolted securely to a dock structure while resisting corrosion in a marine environment. This is the straight mount version; a corner mount version is also offered as a separate part, and the mounting bracket and wheel are not interchangeable between the two styles, so confirm you are ordering the correct mount type for your dock layout. The dock wheel is backed by a 3 year warranty and is made in the USA.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1073\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dock Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Straight Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Housing Diameter:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011460738\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size dock wheel is part number 1073?\u003c\/strong\u003e Taylor Made Products part number 1073 is a 12 inch diameter dock wheel with a 2 inch diameter axle housing for strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the straight mount or corner mount version?\u003c\/strong\u003e Part number 1073 is the straight mount version of the Taylor Made Products dock wheel; a corner mount version is a separate part, and the two use different brackets that are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the corner mount bracket with this wheel, or vice versa?\u003c\/strong\u003e No, the bracket and wheel on this Taylor Made Products 12 inch dock wheel are not interchangeable with the corner mount version, so each mount style requires its own matching bracket and wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the dock wheel made of?\u003c\/strong\u003e The 12 inch dock wheel (part 1073) uses heavy-duty hot-dipped galvanized hardware for the mounting components, which resists corrosion in marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I adjust how firm the wheel feels?\u003c\/strong\u003e Yes, part number 1073 has a molded-in valve so the firmness can be adjusted by adding or releasing air, similar to inflating a tire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this dock wheel weigh?\u003c\/strong\u003e The Taylor Made Products 12 inch straight mount dock wheel weighs 13.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the dock wheel installed?\u003c\/strong\u003e Part 1073 mounts to the dock using its galvanized hardware and bracket, bolting securely to the dock structure in the straight mount orientation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Taylor Made Products dock wheel?\u003c\/strong\u003e This 12 inch straight mount dock wheel (part 1073) is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this dock wheel covered by a warranty?\u003c\/strong\u003e Yes, the Taylor Made Products 12 inch dock wheel, part number 1073, is backed by a 3 year warranty and is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the dock wheel protect against?\u003c\/strong\u003e The 12 inch straight mount dock wheel rolls to cushion contact between a boat and the dock, helping prevent rubbing and impact damage to the hull.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989664411867,"sku":"NAT-1073","price":174.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__53290.1763741540.500.750.jpg?v=1785188212"},{"product_id":"taylor-made-products-1078-dock-pro-inflatable-dock-wheel-9-inch-corner-mount-marine-grade-vinyl-white","title":"Taylor Made Products Dock Pro Inflatable Dock Wheel, 9 Inch Corner Mount, White","description":"\u003cp\u003eThe Taylor Made Products Dock Pro is an inflatable dock wheel built for corner mount applications, providing smooth-rolling cushioning to protect boats and docks from impact and abrasion during docking. The wheel features a molded-in valve so the level of firmness can be adjusted to suit conditions, letting the wheel act as a soft, forgiving buffer rather than a rigid bumper. It mounts to the dock using heavy-duty hot-dipped galvanized hardware, which resists corrosion in marine environments and keeps the wheel securely anchored through repeated use. The wheel body is made from marine-grade vinyl in white, a material chosen to withstand sun, saltwater, and moisture exposure over time. This 9 inch diameter wheel is designed specifically for corner mount positions on a dock; brackets and wheels are not interchangeable between mounting styles, so this corner mount wheel should be paired with corner mount hardware. Taylor Made backs the Dock Pro with a 3 year warranty, and it is made in the USA. It is a straightforward add-on for dock owners looking to reduce hull scuffing, rub rail wear, and dock damage at corner pilings or edges where boats regularly make contact while docking.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1078\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Corner Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Finish:\u003c\/strong\u003e Hot-dipped galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.65 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal corner mount dock application; not interchangeable with straight mount brackets or wheels.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made Products Dock Pro dock wheel, part number 1078?\u003c\/strong\u003e This dock wheel has a 9 inch diameter and is designed for corner mount installation on a dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dock Pro wheel, part 1078, for a corner mount or straight mount?\u003c\/strong\u003e Part number 1078 is a corner mount dock wheel; brackets and wheels are not interchangeable between corner and straight mount styles, so make sure to order the mount type that matches your dock hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 9 inch dock wheel made from?\u003c\/strong\u003e The Taylor Made Products Dock Pro wheel is made from marine-grade vinyl in white, which is designed to hold up to sun and water exposure at the dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the firmness of this dock wheel be adjusted?\u003c\/strong\u003e Yes, part number 1078 has a molded-in valve so the level of firmness can be adjusted to suit how much cushioning you want at the dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dock Pro corner mount wheel weigh?\u003c\/strong\u003e The Taylor Made Products Dock Pro corner mount dock wheel weighs 4.65 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of mounting hardware comes with this dock wheel?\u003c\/strong\u003e It mounts using heavy-duty hot-dipped galvanized hardware, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this dock wheel made in the USA?\u003c\/strong\u003e Yes, the Taylor Made Products Dock Pro dock wheel is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Dock Pro dock wheel?\u003c\/strong\u003e Taylor Made Products backs part number 1078 with a 3 year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use a corner mount bracket from another dock wheel with this one?\u003c\/strong\u003e No, brackets and wheels are not interchangeable, so a corner mount bracket intended for a different wheel should not be paired with the 9 inch Dock Pro wheel, part 1078.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does this dock wheel protect against?\u003c\/strong\u003e The 9 inch corner mount wheel provides rolling cushioning at the dock to help reduce impact and abrasion damage to boats and dock structures during docking.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989664477403,"sku":"NAT-1078","price":100.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__10587.1763741540.500.750.jpg?v=1785188092"},{"product_id":"taylor-made-products-12-inch-corner-mount-dock-wheel-1072-marine-grade-vinyl-with-molded-in-valves-fits-boats-20-to-30-ft","title":"Taylor Made Products 12 Inch Corner Mount Dock Wheel, Part 1072, Fits Boats 20 to 30 Feet","description":"\u003cp\u003eThe Taylor Made Products 12 inch Corner Mount Dock Wheel (part 1072) is an inflatable dock wheel built to cushion boats against the dock at corner mounting points. The wheel uses molded-in air valves so you can adjust the level of firmness to suit your dock and boat weight, and it is sized for boats in the 20 to 30 foot range. A large 2-inch diameter axle housing gives the wheel added strength where it mounts to the dock bracket, and the mounting hardware is hot-dipped galvanized for corrosion resistance in a marine environment. The wheel itself is finished in white marine-grade vinyl and measures 12 inches in diameter, with a 6.5 inch pitch circle diameter and 4.75 inch wheel backspacing.\u003c\/p\u003e\u003cp\u003eThis is the corner mount configuration; Taylor Made also offers a straight mount version of this wheel as a separate part for dock edges that are not at a corner, so confirm your mounting location before ordering. Mounting hardware for attaching the bracket to the dock is not included with the wheel. Brackets and wheels are not interchangeable between sizes, and if you only need to replace the wheel itself, the replacement wheel includes the cap and washer.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1072\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Corner Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Diameter:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Circle Diameter:\u003c\/strong\u003e 6.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Backspacing:\u003c\/strong\u003e 4.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRim Size:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Housing Diameter:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized steel hardware with marine-grade vinyl wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 20 feet to 30 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Finish:\u003c\/strong\u003e Hot-dipped galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Dock wheel with cap and washer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011460721\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRecommended for boats 20 feet to 30 feet in length\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boat sizes is the Taylor Made 1072 dock wheel designed for?\u003c\/strong\u003e The 12 inch corner mount dock wheel, part 1072, is recommended for boats 20 feet to 30 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the corner mount or straight mount version?\u003c\/strong\u003e Part 1072 is the corner mount configuration; a straight mount version of the same 12 inch wheel is sold as a separate part number for non-corner dock edges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the wheel come with mounting hardware?\u003c\/strong\u003e Mounting hardware to attach the wheel to the dock bracket is not included with the Taylor Made 1072 dock wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the wheel?\u003c\/strong\u003e The wheel measures 12 inches in diameter with a 6.5 inch pitch circle diameter and 4.75 inch wheel backspacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this dock wheel weigh?\u003c\/strong\u003e The Taylor Made 1072 corner mount dock wheel weighs 13.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this wheel with any dock bracket?\u003c\/strong\u003e Brackets and wheels for Taylor Made dock wheel systems are not interchangeable, so the wheel should be paired with its matching bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the wheel made from?\u003c\/strong\u003e The wheel body is marine-grade vinyl and is inflatable, while the mounting hardware is hot-dipped galvanized steel for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the firmness of the wheel be adjusted?\u003c\/strong\u003e Yes, the 1072 wheel has a molded-in air valve so you can inflate or deflate it to adjust firmness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the wheel?\u003c\/strong\u003e The Taylor Made 1072 dock wheel is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIf just the wheel wears out, can I replace only the wheel?\u003c\/strong\u003e Yes, the replacement wheel for the 1072 includes the cap and washer needed for reinstallation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the axle housing size on this dock wheel?\u003c\/strong\u003e The 1072 uses a 2-inch diameter axle housing for added mounting strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part 1072 an original Taylor Made Products part?\u003c\/strong\u003e Yes, 1072 is the manufacturer part number for this genuine Taylor Made Products 12 inch corner mount dock wheel.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989664542939,"sku":"NAT-1072","price":185.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__27526.1763741540.500.750.jpg?v=1785189197"},{"product_id":"taylor-made-products-1079-dock-pro-straight-mount-dock-wheel-9-inch-diameter-inflatable-boat-wheel-with-galvanized-hardware","title":"Taylor Made Products Dock Wheel 1079, 9 Inch Straight Mount, Galvanized Metal","description":"\u003cp\u003eThe Taylor Made Products Dock Wheel, part number 1079, is a 9 inch diameter straight mount wheel built to cushion and protect docks from impact. It uses smooth rolling wheel construction that offers substantial dock cushioning, reducing wear where boats and dock hardware make contact. Each wheel features a molded-in valve so the level of firmness can be adjusted to suit the application, letting the owner tune the ride and cushioning to their dock setup.\u003c\/p\u003e\u003cp\u003eMounting hardware is heavy-duty hot-dipped galvanized, allowing the wheel to mount securely to the dock while resisting corrosion in the marine environment. The wheel itself is made of galvanized metal with a zinc exterior finish and a white wheel color, matched to a straight mount bracket configuration. Note that brackets and wheels in this product line are not interchangeable between mount types, so the straight mount bracket and wheel should be paired together as sold.\u003c\/p\u003e\u003cp\u003eThis 9 inch straight mount dock wheel is intended for dock bumper and fender applications where a rolling wheel is preferred over a fixed bumper, helping boats glide against the dock edge instead of scraping.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1079\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Straight Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.65 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011460790\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Dock Wheel, Straight Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Products 1079 dock wheel used for?\u003c\/strong\u003e The 1079 is a 9 inch diameter dock wheel that mounts to a dock to cushion contact with a boat, rolling against the hull instead of scraping it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a straight mount or corner mount wheel?\u003c\/strong\u003e Part number 1079 is the straight mount configuration; Taylor Made Products offers straight and corner mount versions, so confirm you are ordering the straight mount if that is what your dock bracket requires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the 1079 dock wheel?\u003c\/strong\u003e It has a 9 inch diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the dock wheel made from?\u003c\/strong\u003e The wheel is made of galvanized metal with a zinc exterior finish, and the mounting hardware is hot-dipped galvanized for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the firmness of the wheel be adjusted?\u003c\/strong\u003e Yes, the 1079 wheel has a molded-in valve so air can be added or released to adjust how firm the wheel feels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1079 dock wheel weigh?\u003c\/strong\u003e It weighs 4.65 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this listing include the mounting bracket?\u003c\/strong\u003e The included components are the dock wheel and straight mount hardware; the wheel and bracket are not interchangeable with other mount styles, so make sure the bracket type matches this straight mount wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 1079 dock wheel?\u003c\/strong\u003e It is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this wheel mount to the dock?\u003c\/strong\u003e It mounts using heavy-duty hot-dipped galvanized hardware that secures the wheel assembly directly to the dock structure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the wheel and bracket sold as one unit?\u003c\/strong\u003e Yes, part number 1079 is sold as a complete straight mount dock wheel assembly; Taylor Made Products notes that brackets and wheels across its dock wheel line are not interchangeable, so pair the correct bracket with this wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made Products 1079 dock wheel?\u003c\/strong\u003e The UPC is 040011460790.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989664608475,"sku":"NAT-1079","price":94.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__87335.1773195298.500.750.jpg?v=1785188935"},{"product_id":"taylor-made-14-inflatable-dock-wheel-black-marine-grade-vinyl-boat-dock-post-bumper-mpn-1214","title":"Taylor Made 14 Inch Dock Post Wheel, Black Marine-Grade Vinyl, Part 1214","description":"\u003cp\u003eThe Taylor Made 14 Inch Dock Post Wheel (Part 1214) is a roller-style dock bumper built to protect a boat's hull and topsides as it comes alongside a dock post or piling. The wheel mounts on a dock post and rolls smoothly along the boat as it moves in and out of the slip, cushioning contact and preventing scuffs, scrapes, and gouges to the gelcoat. It is constructed from marine-grade vinyl (PVC), a flexible, wear-resistant material chosen for its ability to hold up to repeated impact, sun exposure, and constant contact with water without cracking or losing its shape over time.\u003c\/p\u003e\u003cp\u003eFinished in black, the 14 inch wheel is sized for boats using standard dock post protection setups and is designed as a durable, long-service replacement or upgrade for an existing dock post wheel. It ships as a single wheel unit ready to install on a compatible dock post. This is a straightforward, functional piece of dock hardware meant to reduce maintenance and repair costs by keeping the hull away from direct contact with the post.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1214\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dock Post Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl (PVC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Index:\u003c\/strong\u003e 110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011718143\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00040011718143\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Warranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 1 Dock Post Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made 1214 dock post wheel used for?\u003c\/strong\u003e The Taylor Made 1214 is a 14 inch dock post wheel that mounts on a dock post or piling and rolls against a boat's hull to prevent scuffing and damage as the boat moves in and out of its slip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this dock wheel?\u003c\/strong\u003e Part 1214 is a 14 inch dock post wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Taylor Made 1214 wheel made from?\u003c\/strong\u003e It is made from marine-grade vinyl (PVC), a flexible material chosen for resistance to wear, sun exposure, and repeated contact with the dock post and hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part 1214?\u003c\/strong\u003e The Taylor Made 1214 dock post wheel is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1214 dock wheel weigh?\u003c\/strong\u003e The Taylor Made 1214 dock post wheel weighs 4.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many wheels come in the package?\u003c\/strong\u003e One Taylor Made 1214 dock post wheel is included per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1214 wheel durable enough for regular use?\u003c\/strong\u003e Yes. The marine-grade vinyl construction is designed to withstand the repeated impact and wear of everyday docking as well as ongoing exposure to sun and water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Taylor Made 1214 dock wheel come with a warranty?\u003c\/strong\u003e Yes, the Taylor Made 1214 dock post wheel carries a 90 day manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load index of the 1214 dock wheel?\u003c\/strong\u003e The Taylor Made 1214 dock post wheel has a load index of 110.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1214 an OEM part?\u003c\/strong\u003e Yes, 1214 is Taylor Made's own manufacturer part number for this dock post wheel, not an aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 1214 wheel fit any dock post?\u003c\/strong\u003e The 1214 is a standard 14 inch dock post wheel designed to mount on a compatible dock post; specific post diameter compatibility should be checked against your existing hardware.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989669228763,"sku":"NAT-1214","price":57.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/1214__51135.1722493764.500.750.jpg?v=1785188962"},{"product_id":"taylor-made-products-1224-inflatable-corner-bumper-adjustable-firmness-fender-cushion-18-in-per-side","title":"Taylor Made Products Corner Dock Bumper 1224, Inflatable with Adjustable-Firmness Valve, 18 Inch","description":"\u003cp\u003eThe Taylor Made Products Corner Dock Bumper, part number 1224, is a corner-style dock fender built to cushion the corner of a dock or piling from boat and dock-lift impact. It is inflatable, and an inflation valve lets you dial in the firmness of the bumper to suit how much cushioning you want at that corner. Each side of the corner piece measures 3-1\/4 inches in diameter by 5 inches tall by 18 inches long, giving it a low, elongated profile that wraps the corner edge rather than sitting as a single round fender. At 8 pounds, it is light enough to position and mount without special equipment. This is the genuine Taylor Made Products part 1224, made for boat dock corners where a standard straight-run bumper will not follow the angle.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1224\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Corner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (each side):\u003c\/strong\u003e 3-1\/4 inches diameter x 5 inches tall x 18 inches long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature:\u003c\/strong\u003e Inflation valve to adjust firmness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011718136\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Dock Bumper\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Products 1224 corner dock bumper used for?\u003c\/strong\u003e It cushions the corner of a boat dock or piling from impact, using a corner-fit shape that follows the angle of the dock instead of a straight run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 1224 corner bumper?\u003c\/strong\u003e Each side of the Taylor Made Products 1224 measures 3-1\/4 inches in diameter by 5 inches tall by 18 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the firmness of the bumper be adjusted?\u003c\/strong\u003e Yes, the 1224 corner bumper has an inflation valve that lets you adjust how firm the bumper is.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1224 corner dock bumper weigh?\u003c\/strong\u003e It weighs 8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1224 an inflatable bumper?\u003c\/strong\u003e Yes, it is an inflatable corner bumper with a valve for adjusting inflation and firmness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this corner dock bumper?\u003c\/strong\u003e The manufacturer part number is 1224, made by Taylor Made Products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made 1224 corner dock bumper?\u003c\/strong\u003e The UPC is 040011718136.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Taylor Made Products part or an aftermarket copy?\u003c\/strong\u003e Part number 1224 is a genuine Taylor Made Products corner dock bumper, not an aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1224 bumper come with mounting hardware?\u003c\/strong\u003e The available specifications for the Taylor Made 1224 corner bumper list its dimensions, weight, and inflation valve but do not list included mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape is the 1224 dock bumper?\u003c\/strong\u003e It is a corner-style bumper, with each of its two sides measuring 3-1\/4 inches diameter by 5 inches tall by 18 inches long so it wraps a dock corner.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989669523675,"sku":"NAT-1224","price":146.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__56888.1763741618.500.750.jpg?v=1785188232"},{"product_id":"taylor-made-hull-saver-vinyl-covered-straight-dock-bumper-white-24l-x-4t-x-2-1-2d-mpn-344","title":"Taylor Made Products Dock Bumper 344, Standard Straight, White, 24 x 4 x 2-1\/2 Inches","description":"\u003cp\u003eThe Taylor Made Products Dock Bumper, Standard Straight (Part No. 344), is a vinyl-covered hull protector designed to cushion your boat's hull against dock pilings, seawalls, and other hard mooring surfaces. Its straight profile runs 24 inches long, making it easy to mount along a dock edge or piling wherever extra impact protection is needed. The bumper is built with corrosion-proof grommets at the mounting points, so hardware exposed to constant moisture and saltwater resists rust and premature failure. The vinyl covering shields the foam core from UV exposure, abrasion, and water intrusion, helping the bumper hold up to repeated contact over a boating season after season. Finished in white, it blends in with most hull colors and dock trim rather than standing out as an aftermarket add-on. At 24 inches long by 4 inches tall by 2-1\/2 inches deep, it is sized for typical recreational boat and dock applications where a compact, low-profile bumper is preferred over a bulkier fender. Weighing 0.55 pounds, it is light enough to mount and remove without special tools or hardware beyond basic dock line or fastener attachment. This is a straightforward, no-frills dock bumper for boat owners who want reliable hull protection without a large fender taking up space on the dock or gunwale.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 344\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 24 inches L x 4 inches T x 2-1\/2 inches D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.55 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl-covered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Corrosion-proof grommets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Standard straight profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011669681\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Products Dock Bumper 344 made of?\u003c\/strong\u003e It is a vinyl-covered dock bumper, part number 344, with a foam core wrapped in vinyl to resist UV exposure, abrasion, and water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is dock bumper 344?\u003c\/strong\u003e The Taylor Made 344 dock bumper measures 24 inches long by 4 inches tall by 2-1\/2 inches deep, a straight profile sized for typical dock and hull applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 344 dock bumper weigh?\u003c\/strong\u003e It weighs 0.55 pounds, per the manufacturer's listed weight for part number 344.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options does part number 344 come in?\u003c\/strong\u003e This listing for Taylor Made part number 344 is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 344 dock bumper have corrosion-resistant hardware?\u003c\/strong\u003e Yes, the mounting grommets on the Taylor Made 344 dock bumper are corrosion-proof, which matters since dock bumpers stay exposed to constant moisture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a straight or curved dock bumper?\u003c\/strong\u003e Part number 344 is a standard straight dock bumper, intended for mounting along a flat dock edge or piling rather than a corner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Taylor Made 344 dock bumper mounted?\u003c\/strong\u003e It mounts using the corrosion-proof grommets built into the vinyl-covered body, allowing it to be fastened along a dock edge, piling, or hull rail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part number 344?\u003c\/strong\u003e The order includes one Taylor Made Products Dock Bumper, Standard Straight, part number 344, in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Taylor Made part number 344 an OEM part?\u003c\/strong\u003e Yes, 344 is the genuine Taylor Made Products manufacturer part number for this white straight dock bumper, not an aftermarket reproduction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 344 dock bumper protect my hull from dock pilings?\u003c\/strong\u003e It is designed to cushion the hull against dock pilings, seawalls, and other hard mooring surfaces, which is the primary purpose of the Taylor Made 344 dock bumper.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989670637787,"sku":"NAT-344","price":17.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71tO0b47QSL.jpg?v=1784486867"},{"product_id":"taylor-made-products-345-hull-saver-vinyl-corner-dock-bumper-10-x-10-x-4-x-2-1-2-white","title":"Taylor Made Products Corner Dock Bumper #345, 10 In x 10 In x 4 In Tall x 2-1\/2 In Deep, White Vinyl","description":"\u003cp\u003eThe Taylor Made Products Corner Dock Bumper, part number 345, is a vinyl-covered corner bumper built to cushion and protect boat hulls where they meet the corner edge of a dock. Its L-shaped profile wraps around a dock corner to absorb impact and prevent scuffing, scratching, and hull damage during docking, mooring, and rough water conditions. The bumper measures 10 inches by 10 inches along its two mounting legs, stands 4 inches tall, and is 2-1\/2 inches deep, giving it enough cushioning depth to protect against repeated contact.\u003c\/p\u003e\u003cp\u003eThe bumper is covered in a vinyl and polyester exterior finish for weather and UV resistance, finished in white to blend with most hull and dock colors. Corrosion-proof grommets are built into the mounting points, making it straightforward to attach with screws or fasteners to a dock corner, piling, or similar structure. At 0.45 pounds, it is lightweight and easy to install without special tools. This corner bumper is a universal-fit dock accessory suited to any dock, pier, or piling corner that needs hull protection.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 345\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Corner Dock Bumper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 inches x 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial \/ Exterior Finish:\u003c\/strong\u003e Vinyl\/Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Corrosion-proof grommets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011669698\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made Products corner dock bumper, part 345?\u003c\/strong\u003e Part number 345 measures 10 inches by 10 inches along its two mounting legs, stands 4 inches tall, and is 2-1\/2 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bumper made for a dock corner or a straight edge?\u003c\/strong\u003e It is a corner bumper, shaped to wrap around and protect a dock corner rather than a straight dock edge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the corner bumper made of?\u003c\/strong\u003e The Taylor Made Products #345 bumper has a vinyl and polyester exterior finish, chosen for weather and UV resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does part number 345 come in?\u003c\/strong\u003e It is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the corner dock bumper weigh?\u003c\/strong\u003e 0.45 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the bumper mounted to the dock?\u003c\/strong\u003e Part 345 has corrosion-proof grommets built into the mounting points, allowing it to be attached to a dock corner or piling with screws or similar fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this bumper fit any boat or dock?\u003c\/strong\u003e Yes, the Taylor Made Products corner dock bumper is a universal-fit accessory intended for any dock, pier, or piling corner needing hull protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the corner dock bumper protect against?\u003c\/strong\u003e It cushions the corner contact point between a boat hull and the dock, reducing scuffing, scratching, and impact damage during docking and mooring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part 345?\u003c\/strong\u003e The order includes one Taylor Made Products corner dock bumper with its grommet mounting points; no separate hardware kit is listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part number 345 the same as the manufacturer part number?\u003c\/strong\u003e Yes, 345 is the Taylor Made Products manufacturer part number for this corner dock bumper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the corner bumper different from Taylor Made's straight dock bumpers?\u003c\/strong\u003e Unlike Taylor Made's straight bumpers, part 345 has an L-shaped 10 inch by 10 inch profile designed specifically to wrap around a dock corner rather than run along a flat edge.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989670703323,"sku":"NAT-345","price":19.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/1__00507.1763741613.500.750.jpg?v=1785188648"},{"product_id":"taylor-made-348-hull-saver-large-straight-dock-bumper-60-l-x-8-x-6-d-vinyl-covered-hd-foam-white","title":"Taylor Made Dock Bumper 348, 60 Inch Large Straight Hull-Saver Fender, White","description":"\u003cp\u003eThe Taylor Made 348 is a 60 inch large straight dock bumper built to protect boat hulls from impact and abrasion during docking and rafting. It uses a high-density polyethylene foam core for shock absorption, wrapped in a UV-resistant, tear-proof vinyl covering that stays flexible and holds up to sun exposure over time. Corrosion-resistant grommets are set into the bumper for a secure, long-lasting mount to dock pilings, pier edges, or dock frames.\u003c\/p\u003e\u003cp\u003eAt 60 inches long, 8 inches thick, and 6 inches deep, the 348 is sized for full-length coverage along a dock run or hull side, making it suited to both private and commercial marina use. It is finished in white and weighs 1.3 pounds, making it easy to position and install without added bulk. Taylor Made builds this bumper in the USA as part of its straight-profile marine bumper lineup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 348\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Dock Bumper, Large Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 60 inches L x 8 inches T x 6 inches D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polyethylene foam core with vinyl covering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Corrosion-resistant grommets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011675040\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made 348 dock bumper?\u003c\/strong\u003e The Taylor Made 348 measures 60 inches long by 8 inches thick by 6 inches deep, and it is described as the large straight bumper in the Taylor Made lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made 348 dock bumper made of?\u003c\/strong\u003e It has a high-density polyethylene foam core covered in a UV-resistant, tear-proof vinyl layer, which absorbs impact while resisting sun damage and tearing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 348 dock bumper weigh?\u003c\/strong\u003e The Taylor Made 348 weighs 1.3 pounds, which is light enough for one person to position and mount without help.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 348 dock bumper come in?\u003c\/strong\u003e This bumper is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 348 suitable for a commercial marina?\u003c\/strong\u003e Yes, the 60 inch straight profile is built to handle both private docks and commercial marina use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Taylor Made 348 dock bumper mounted?\u003c\/strong\u003e It mounts using built-in corrosion-resistant grommets, which allow it to be fastened to a dock, piling, or pier edge and resist rust over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Taylor Made 348 manufactured?\u003c\/strong\u003e The 348 dock bumper is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Taylor Made 348 and the 347 dock bumper?\u003c\/strong\u003e The 348 is 60 inches long by 8 inches thick by 6 inches deep, while the smaller 347 straight bumper measures 36 inches long by 8 inches thick by 6 inches deep, making the 348 the choice for longer coverage runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 348 a straight or corner dock bumper?\u003c\/strong\u003e The 348 is a straight bumper, distinct from Taylor Made's corner bumper option (model 350), which is shaped for mounting at dock corners rather than along a straight run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the foam core of the 348 dock bumper hold up over time?\u003c\/strong\u003e The high-density polyethylene foam core is designed to resist compression from repeated impacts, and its vinyl covering is tear-proof and UV-resistant to prevent it from breaking down in sunlight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Taylor Made 348 come with mounting hardware included?\u003c\/strong\u003e The bumper includes corrosion-resistant grommets built into it for mounting, so no separate mounting hardware needs to be sourced to attach it to a dock or piling.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989670834395,"sku":"NAT-348","price":75.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31gVNlrLMVL.jpg?v=1784486879"},{"product_id":"taylor-made-products-349-heavy-duty-straight-dock-bumper-36-vinyl-covered-boat-dock-guard-with-corrosion-proof-grommets","title":"Taylor Made Products Heavy Duty Dock Bumper - Straight, 36 x 5.9 x 4 Inches","description":"\u003cp\u003eThis heavy duty straight dock bumper from Taylor Made Products is built to absorb impact and prevent scuffing wherever a boat meets a dock, piling, or seawall. The core is high-density closed cell polyethylene foam, which keeps its shape and cushioning ability even after repeated compression from docking or rafting up alongside other boats. That foam core is fully wrapped in a tough vinyl\/polyester tri-laminate covering that resists tearing and UV breakdown, so the bumper holds its color and flexibility through seasons of sun exposure and abrasion against rough dock edges.\u003c\/p\u003e\u003cp\u003eMounting is handled through corrosion-proof grommets molded into the ends, letting you lash or bolt the bumper to a dock post, rail, or hull rub rail without worrying about rust streaks or grommet failure over time. Because it is a straight profile bumper with a universal fit, it works across a wide range of boats and dock setups rather than being limited to one hull shape or size. It is a straightforward, durable way to add a dedicated buffer zone anywhere hard contact between a boat and a fixed structure is likely.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 349\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Heavy Duty Dock Bumper - Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 36 x 5.9 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density closed cell polyethylene foam with UV-resistant vinyl\/polyester tri-laminate cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltraviolet Light Protection:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011675057\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Products dock bumper 349 used for?\u003c\/strong\u003e It is a heavy duty straight dock bumper designed to protect a boat hull and dock structure from impact and abrasion during docking or when rafting up alongside another boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this dock bumper made of?\u003c\/strong\u003e The core is high-density closed cell polyethylene foam, wrapped in a UV-resistant and tear-proof vinyl\/polyester tri-laminate covering, giving part number 349 its cushioning and weather resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is dock bumper 349?\u003c\/strong\u003e It measures 36 x 5.9 x 4 inches, sized as a straight profile bumper for mounting along a dock, piling, or rail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 349 dock bumper weigh?\u003c\/strong\u003e This Taylor Made Products dock bumper weighs 1.45 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this bumper fit my boat or dock?\u003c\/strong\u003e Yes, part number 349 is a universal fit dock bumper, meaning it is not limited to a specific boat model or dock design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the dock bumper attached?\u003c\/strong\u003e Corrosion-proof grommets are built into the bumper for easy attachment to a dock, rail, or other mounting point without risk of rust.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this dock bumper UV resistant?\u003c\/strong\u003e Yes, the tri-laminate vinyl\/polyester covering on the 349 dock bumper is UV resistant, so it will not break down quickly from sun exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 349 dock bumper water resistant?\u003c\/strong\u003e Yes, it is rated water resistant, which suits its constant exposure to dock and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Taylor Made Products 349 dock bumper?\u003c\/strong\u003e It is offered in a multi color finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this dock bumper?\u003c\/strong\u003e Each order includes one Taylor Made Products Heavy Duty Dock Bumper - Straight, part number 349.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989670998235,"sku":"NAT-349","price":29.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/lsc__45251.1754571746.500.750.jpg?v=1785188700"},{"product_id":"taylor-made-products-350-heavy-duty-corner-dock-bumper-vinyl-covered-closed-cell-foam-piling-and-corner-guard","title":"Taylor Made Products Heavy Duty Corner Dock Bumper, Part Number 350, Vinyl\/Polyester Fender","description":"\u003cp\u003eThe Taylor Made Products Heavy Duty Corner Dock Bumper (Part Number 350) is built to protect boats and docks from impact damage during docking, rafting, and mooring. Its corner design makes it well suited for protecting dock edges and pilings where boats commonly make contact. The bumper is covered in a tough vinyl\/polyester tri-laminate blend that resists UV exposure and tearing, so it holds up to sun, saltwater, and repeated abrasion over time. Inside, it is filled with high-density closed cell polyethylene foam, which keeps the bumper buoyant and resilient under repeated compression rather than losing its shape. Corrosion-proof grommets are built into the bumper for easy, secure attachment to a dock, piling, or boat rail, making installation straightforward for a wide range of mounting setups. With a universal fit, this dock bumper works across general marine and personal watercraft docking applications rather than being limited to one boat make or model. It measures 15 inches by 11 inches by 8 inches and weighs 0.9 pounds, making it a compact, easy-to-handle bumper for spot protection at corners and other high-contact areas around the dock.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 350\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Heavy Duty Dock Bumper - Corner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl\/Polyester Tri-Laminate Blend with High-Density Closed Cell Polyethylene Foam Fill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 15 inches D x 11 inches W x 8 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Marine \/ Personal Watercraft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment:\u003c\/strong\u003e Corrosion-Proof Grommets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011675064\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Products Heavy Duty Corner Dock Bumper used for?\u003c\/strong\u003e It is designed to protect boats and docks from impact damage during docking and rafting, with the corner shape aimed at protecting dock edges and pilings where contact is most common.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is part number 350 made of?\u003c\/strong\u003e Part number 350 is covered in a vinyl\/polyester tri-laminate blend that resists UV exposure and tearing, with a fill of high-density closed cell polyethylene foam inside.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this dock bumper fit any boat?\u003c\/strong\u003e Yes, this Taylor Made Products bumper has a universal fit and is intended for general marine and personal watercraft docking applications rather than a specific boat make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the dock bumper attached to a dock or boat?\u003c\/strong\u003e It attaches using corrosion-proof grommets built into the bumper, which allow for easy and secure mounting to a dock, piling, or rail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the corner dock bumper?\u003c\/strong\u003e The bumper measures 15 inches D x 11 inches W x 8 inches H.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the dock bumper weigh?\u003c\/strong\u003e Part number 350 weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this dock bumper?\u003c\/strong\u003e It is listed in a multi color finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the foam inside the bumper closed cell or open cell?\u003c\/strong\u003e The bumper uses high-density closed cell polyethylene foam, which resists water absorption and holds its shape under repeated compression.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the vinyl covering UV resistant?\u003c\/strong\u003e Yes, the vinyl\/polyester tri-laminate covering on this Taylor Made Products bumper is UV resistant and tear resistant for outdoor marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bumpers come in the package?\u003c\/strong\u003e The listing includes one Heavy Duty Dock Bumper - Corner, part number 350.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Taylor Made Products part?\u003c\/strong\u003e Yes, part number 350 is a genuine Taylor Made Products component, not a generic aftermarket copy.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989671063771,"sku":"NAT-350","price":28.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/NAT-350__27128.1558341495.500.750.jpg?v=1785189092"},{"product_id":"taylor-made-45600-white-dock-post-bumper-7-x-17-slides-over-1-5-dock-pipe-marine-grade-vinyl-made-in-usa","title":"Taylor Made Dock Post Bumper 45600, White, 7 x 17 Inch Vinyl Post Cushion with Inflation Valve","description":"\u003cp\u003eThe Taylor Made Dock Post Bumper (part number 45600) is a white vinyl cushion built to protect boat hulls from impact and abrasion against dock pilings. It slides directly over a 1.5 inch dock pipe, giving the post a soft, forgiving surface so hull gelcoat and paint stay free of scuffs and dings when a boat comes alongside or shifts with wave action and wind.\u003c\/p\u003e\u003cp\u003eThe bumper body is made from marine grade vinyl, chosen for its resistance to UV exposure, saltwater, and repeated flexing without cracking or splitting. An inflation valve is built into the bumper so owners can adjust internal air pressure to set the firmness that best suits their boat size and dock conditions -- firmer for larger vessels and heavier impacts, softer for smaller boats. At 7 inches in diameter and 17 inches long, it covers a substantial section of post height, and the white finish is a neutral match for most dock and hull colors. The bumper is manufactured in the USA.\u003c\/p\u003e\u003cp\u003eThis bumper fits over a standard 1.5 inch diameter dock pipe. For other post colors, Taylor Made also offers this same bumper style in additional finishes under separate part numbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 45600\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dock Post Bumper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 7 inches diameter x 17 inches long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDock Pipe Fit:\u003c\/strong\u003e Slides over 1.5 inch dock pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature:\u003c\/strong\u003e Inflation valve for adjustable firmness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011735362\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size dock pipe does the Taylor Made 45600 bumper fit?\u003c\/strong\u003e It slides over a 1.5 inch diameter dock pipe, which is the standard size for most residential dock posts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 45600?\u003c\/strong\u003e Part 45600 is the white version of Taylor Made's dock post bumper. The same bumper is also available in other colors under different part numbers, such as a Mid Atlantic Blue version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this dock bumper?\u003c\/strong\u003e The Taylor Made 45600 measures 7 inches in diameter and 17 inches long, covering a substantial section of a dock post.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I adjust how firm the bumper is?\u003c\/strong\u003e Yes, the 45600 bumper has a built-in inflation valve so you can add or release air to set the firmness level for your boat and dock conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the bumper made from?\u003c\/strong\u003e It is made from marine grade vinyl, a material chosen for resistance to UV rays, saltwater exposure, and repeated flexing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made 45600 weigh?\u003c\/strong\u003e The bumper weighs 4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this dock bumper made in the USA?\u003c\/strong\u003e Yes, the Taylor Made 45600 dock post bumper is manufactured in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this bumper attach to a dock post?\u003c\/strong\u003e It is not bolted on -- the vinyl bumper simply slides down over the 1.5 inch dock pipe and stays in place once inflated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fit a dock post larger than 1.5 inches?\u003c\/strong\u003e The 45600 is designed specifically to slide over a 1.5 inch dock pipe, so it is not intended for larger diameter posts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 45600?\u003c\/strong\u003e You receive one white vinyl dock post bumper (part 45600) with its inflation valve already installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Taylor Made make this bumper in other colors?\u003c\/strong\u003e Yes, in addition to the white 45600, Taylor Made offers the same bumper design in other finishes, such as Mid Atlantic Blue under part number 45604, each sold as a separate part number.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989672603867,"sku":"NAT-45600","price":34.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__12160.1756323739.500.750.jpg?v=1785189000"},{"product_id":"taylor-made-46069-wave-pvc-dock-edge-bumper-5-x-25-white-coil-shock-absorbing-dock-edging-hardware-included","title":"Taylor Made Products Wave Dock Edging, White PVC Bumper, 5 Inch x 1\/4 Inch x 25 Foot Coil, Model 46069","description":"\u003cp\u003eThe Taylor Made Products Wave Dock Edging (model 46069) is a heavy-duty vinyl dock bumper designed to protect the sides of a dock or pier from repeated contact with a boat's hull. Sold as a 25 foot coil, this edging is built with a strong polyester core wrapped in a smooth, UV-resistant PVC cover, then molded twice and molecularly bonded for added durability. The construction is both rigid enough to hold its shape and flexible enough to be formed into a wave or loop pattern along the dock edge, creating a shock-absorbing bumper grid that cushions the boat and prevents hull damage during docking.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the flexible vinyl strip is shaped into the wave pattern and nailed directly to the dock, with mounting hardware included in the package. Once installed, the 25 foot coil covers approximately 18 feet of dock edge due to the wave\/loop forming process. This white PVC edging is intended for boat docks and piers and is manufactured in the USA.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 46069\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester core with PVC (vinyl) cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Protects approximately 18 feet of dock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Nail mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16.75 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much dock does the Taylor Made 46069 dock edging cover?\u003c\/strong\u003e One 25 foot coil of the Taylor Made 46069 wave dock edging protects approximately 18 feet of dock once it is formed into its wave\/loop installation pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this dock edging?\u003c\/strong\u003e The Taylor Made 46069 measures 5 inches in height, 1\/4 inch in width, and comes in a 25 foot coil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with part number 46069?\u003c\/strong\u003e Yes, mounting hardware is included with the Taylor Made 46069 wave dock edging, so no separate hardware purchase is needed for a standard nail-mount installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made 46069 dock edging made of?\u003c\/strong\u003e It is constructed with a strong polyester core wrapped in a smooth, UV-resistant PVC (vinyl) cover, molded twice and molecularly bonded for added durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 46069 wave dock edging installed?\u003c\/strong\u003e Installation involves flexing the vinyl strip into a wave or loop shape along the dock edge and nailing it down, which is how the 25 foot coil is able to protect about 18 feet of dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the Taylor Made 46069 come in?\u003c\/strong\u003e The Taylor Made 46069 wave dock edging is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 46069 dock edging weigh?\u003c\/strong\u003e The Taylor Made 46069 weighs 16.75 pounds per 25 foot coil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this dock edging flexible or rigid?\u003c\/strong\u003e The Taylor Made 46069 is designed to be both rigid and flexible, holding its shape as a bumper while remaining pliable enough to be formed into the wave installation pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this dock bumper fit any boat dock?\u003c\/strong\u003e Yes, the Taylor Made 46069 wave dock edging is a universal-fit product intended for boat docks and piers generally, not a specific boat model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Taylor Made 46069 manufactured?\u003c\/strong\u003e The Taylor Made 46069 wave dock edging is made in the USA.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989672636635,"sku":"NAT-46069","price":84.81,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/nat-46069_lg__13242.1558117595.500.750.jpg?v=1785189177"},{"product_id":"taylor-made-46081-10-corner-mount-dock-bumper-white-marine-grade-vinyl-dock-guard","title":"Taylor Made 46081 Corner Mount Dock Bumper, White, 10 Inch x 10 Inch","description":"\u003cp\u003eThe Taylor Made 46081 is a corner mount dock bumper measuring 10 inches by 10 inches, built to protect the corner edges of a dock and the hull of a boat from impact damage. It is made from marine grade vinyl that provides cushioning at the point of contact while resisting the wear and weathering that comes with constant exposure to sun and water.\u003c\/p\u003e\u003cp\u003eThis bumper is finished in white, with the color permanently molded into the vinyl itself rather than applied as a surface coating or paint. Because the pigment runs through the material, the bumper will not transfer color onto a boat's hull the way a painted or coated fender can, keeping gelcoat and hull finishes clean during routine docking.\u003c\/p\u003e\u003cp\u003eThe corner mount design is intended for placement at the corner of a dock, where two dock faces meet and where impact risk is highest as boats approach or are moved along the slip. It supplements straight-run dock bumpers along flat dock edges, giving full coverage around the perimeter of a dock structure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 46081\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Corner mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 10 inches x 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.6 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made 46081 dock bumper?\u003c\/strong\u003e The Taylor Made 46081 measures 10 inches by 10 inches and is designed for corner mounting on a dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 46081 dock bumper come in?\u003c\/strong\u003e It is finished in white, with the color permanently molded into the marine grade vinyl rather than painted on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the white finish transfer onto my boat's hull?\u003c\/strong\u003e No. Because the color is molded through the vinyl of the Taylor Made 46081 rather than surface coated, it resists transferring onto a boat's hull during contact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made 46081 dock bumper made of?\u003c\/strong\u003e It is made from marine grade vinyl, chosen for its cushioning and resistance to sun and water exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 46081 dock bumper weigh?\u003c\/strong\u003e The Taylor Made 46081 weighs 1.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere on the dock should this bumper be installed?\u003c\/strong\u003e The 46081 is a corner mount bumper, meant for the corner of a dock where two dock faces meet, as opposed to a straight run along a flat edge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Taylor Made make a straight mount version of this bumper?\u003c\/strong\u003e Corner mount and straight mount dock bumpers are separate products in the Taylor Made lineup; the 46081 is specifically the corner mount, 10 inch by 10 inch version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 46081 suitable for both freshwater and saltwater docks?\u003c\/strong\u003e The marine grade vinyl construction of the Taylor Made 46081 is built to withstand ongoing water and sun exposure typical of dock environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the dock bumper come with mounting hardware in the box?\u003c\/strong\u003e The listing for the Taylor Made 46081 covers the vinyl corner bumper itself; hardware inclusion is not specified in the available product information.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an authentic Taylor Made product?\u003c\/strong\u003e Yes, the 46081 corner mount dock bumper is a genuine Taylor Made part, identified by manufacturer part number 46081.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989672702171,"sku":"NAT-46081","price":19.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31ZKhuOaO7L.jpg?v=1784486991"},{"product_id":"taylor-made-46076-dock-pro-vinyl-dock-bumper-10-x-10-corner-mount-black-1-1-4-cushion-boat-and-dock-protection","title":"Taylor Made 46076 Black Vinyl Dock Bumper, 10 Inch x 10 Inch Corner Mount","description":"\u003cp\u003eThe Taylor Made 46076 is a corner mount vinyl dock bumper measuring 10 inches by 10 inches, built to cushion the point of a dock where boats most often make contact. It is constructed from marine-grade vinyl, the same material Taylor Made uses in its boat fenders, so it holds up to sun, rain, and repeated impact without fading or cracking over time. A 1-1\/4 inch cushion covers both the top and sides of the dock corner, absorbing the blows a boat delivers while docking or when wind and current push a hull against a dock edge.\u003c\/p\u003e\u003cp\u003eThe bumper's black color is molded directly into the vinyl rather than painted on, so it will not transfer, scuff off, or rub onto a boat's hull. It mounts with solid flap-style straps that can be drilled and fastened with nails, screws, or finishing washers, and installation is a one-person job (mounting hardware is not included). The 46076 is designed for corner mounting only; it is not made to attach to a straight-mount bumper. Overall product dimensions are 12 inches deep by 10 inches wide by 4 inches high.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 46076\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Corner mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10 inches x 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCushion Thickness:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 12 inches D x 10 inches W x 4 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011460769\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e00040011455109\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made 46076 dock bumper?\u003c\/strong\u003e The Taylor Made 46076 is a corner mount dock bumper measuring 10 inches by 10 inches, with overall product dimensions of 12 inches deep by 10 inches wide by 4 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 46076 dock bumper made for a corner or a straight edge?\u003c\/strong\u003e It is a corner mount bumper, designed specifically to cushion a dock corner rather than a straight run of dock edge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 46076 be attached to a straight-mount Taylor Made bumper?\u003c\/strong\u003e No. The corner mount 46076 is not designed to attach to a straight mount bumper; the two styles are separate products meant to be installed independently.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options are available for this bumper?\u003c\/strong\u003e The 46076 is black, with the color molded into the vinyl itself so it will not transfer onto a boat hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Taylor Made 46076 dock bumper made from?\u003c\/strong\u003e It is made from marine-grade vinyl, the same durable material Taylor Made uses in its boat fenders, chosen to resist fading and hold up to sun and weather exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick is the cushioning on this dock bumper?\u003c\/strong\u003e The 46076 has a 1-1\/4 inch cushion that covers the top and sides of a dock corner to absorb impact from a docking boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 46076 dock bumper include mounting hardware?\u003c\/strong\u003e No, hardware is not included. The bumper has solid mounting flaps that can be attached with nails, screws, or finishing washers, and installation is a one-person job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made 46076 weigh?\u003c\/strong\u003e This corner mount dock bumper weighs 1.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the black finish on the 46076 rub off onto my boat?\u003c\/strong\u003e No. The black color is molded into the vinyl rather than coated on top, so it will not transfer to a boat's hull the way a painted finish might.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 46076 a genuine Taylor Made product?\u003c\/strong\u003e Yes, the 46076 is a genuine Taylor Made corner mount vinyl dock bumper, part number 46076.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made 46076 dock bumper?\u003c\/strong\u003e The UPC for the Taylor Made 46076 corner mount dock bumper is 040011460769.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989672767707,"sku":"NAT-46076","price":20.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61XpdXQ4lZL.jpg?v=1784486996"},{"product_id":"taylor-made-products-mw-140-standard-mooring-whip-14-ft-fixed-angle-base-for-boats-24-ft-to-28-ft-5-000-to-10-000-lbs","title":"Taylor Made Fixed Angle Mooring Whip MW.140, 14 Foot, Fits Boats 24 to 28 Feet","description":"\u003cp\u003eThe Taylor Made MW.140 is a 14 foot fixed angle base mooring whip built to hold a boat safely off the dock, cushioning it against pilings and dock edges caused by wave action, wakes, and changing tides. It uses a fixed angle fiberglass base design, which positions the whip at a set angle to keep the boat pushed away from the dock without the pivoting motion of a rocker arm base. The pole is constructed from sturdy fiberglass for durability in fresh or saltwater environments, and it incorporates a low friction tip along with a whip cleat that makes it easy for boarding boaters to retrieve and stow the whip.\u003c\/p\u003e\u003cp\u003eThe MW.140 is sized for boats 24 feet to 28 feet, with a rated capacity of 5,000 to 10,000 pounds. It is manufactured in the USA by Taylor Made, a marine brand that has been producing dock and mooring accessories for over 100 years. For larger boats, Taylor Made also offers a rocker arm base premium whip line under a different part number, so buyers should confirm boat length and weight before ordering to select the correct fixed angle MW.140 versus a rocker arm alternative.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MW.140\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Type:\u003c\/strong\u003e Fixed Angle Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhip Length:\u003c\/strong\u003e 14 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Length Fitment:\u003c\/strong\u003e 24 feet to 28 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Capacity:\u003c\/strong\u003e 5,000 to 10,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fiberglass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 84 x 5.25 x 5.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions (L x W x H):\u003c\/strong\u003e 94 x 6.9 x 5.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Mooring whip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011489630\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBoats 24 feet to 28 feet, 5,000 to 10,000 pounds\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat does the Taylor Made MW.140 mooring whip fit?\u003c\/strong\u003e The MW.140 is sized for boats 24 feet to 28 feet with a rated capacity of 5,000 to 10,000 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MW.140 a fixed angle or rocker arm mooring whip?\u003c\/strong\u003e The MW.140 uses a fixed angle base, which holds the whip at a set angle to push the boat away from the dock rather than pivoting like a rocker arm design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the MW.140 mooring whip made of?\u003c\/strong\u003e It is made of fiberglass, chosen for its strength and resistance to fresh and saltwater conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Taylor Made MW.140 whip?\u003c\/strong\u003e The MW.140 is a 14 foot mooring whip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MW.140 mooring whip weigh?\u003c\/strong\u003e The MW.140 weighs 23.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the item dimensions of the MW.140?\u003c\/strong\u003e The Taylor Made MW.140 measures 84 x 5.25 x 5.25 inches as assembled; its shipping package measures 94 x 6.9 x 5.6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MW.140 come with a retrieval cleat?\u003c\/strong\u003e Yes, the MW.140 incorporates a whip cleat along with a low friction tip to make retrieval easy for boarding boaters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MW.140 made in the USA?\u003c\/strong\u003e Yes, the Taylor Made MW.140 mooring whip is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the MW.140?\u003c\/strong\u003e The MW.140 order includes one mooring whip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the MW.140 and a rocker arm mooring whip?\u003c\/strong\u003e The MW.140 uses a fixed angle base for boats 24 to 28 feet and 5,000 to 10,000 pounds, while Taylor Made's rocker arm base whips are a different part number designed for larger boats with a pivoting arm rather than a fixed angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the MW.140 be used in saltwater?\u003c\/strong\u003e Yes, the fiberglass construction of the MW.140 is suited to both fresh and saltwater use.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989699670235,"sku":"NAT-MW-140","price":837.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71_zK7aF_QL.jpg?v=1784487420"},{"product_id":"taylor-made-pmw-1400-premium-mooring-whip-14-rocker-arm-base-for-boats-up-to-33-20-000-lbs","title":"Taylor Made Products Premium Mooring Whip PMW.1400, 14 ft Rocker Arm Base, Boats Up to 33 ft \/ 20,000 lbs","description":"\u003cp\u003eThe Taylor Made Products PMW.1400 Premium Mooring Whip is a 14 foot rocker arm base mooring whip built to hold your boat safely away from the dock when it is moored. The rocker arm base lets the whip flex and absorb the motion of wakes, wind, and tidal surge instead of transferring that stress directly into the boat and dock hardware, which is why Taylor Made recommends this style for high wake, high wind, and large tidal areas, including salt water. The pole is fiberglass for strength and corrosion resistance, and each whip incorporates a low friction tip along with a whip cleat that makes it easy to retrieve the pole when boarding.\u003c\/p\u003e\u003cp\u003eThe PMW.1400 is sized for boats up to 33 feet in length and up to 20,000 pounds. It ships as a single mooring whip unit (pole and rocker arm base assembly) and is intended to be paired with a second whip and standard dock or piling mounting hardware for a complete mooring setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PMW.1400\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Mooring Whip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Type:\u003c\/strong\u003e Rocker Arm Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Length:\u003c\/strong\u003e 14 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e Up to 33 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Boat Weight Capacity:\u003c\/strong\u003e Up to 20,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 35.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 88 x 7 x 5.8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fiberglass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Mooring whip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011489593\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoats up to 33 feet in length\u003c\/li\u003e\n\u003cli\u003eBoats up to 20,000 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Taylor Made PMW.1400 mooring whip designed for?\u003c\/strong\u003e The PMW.1400 Premium Mooring Whip is designed for boats up to 33 feet in length and up to 20,000 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the PMW.1400 use a rocker arm base or a fixed angle base?\u003c\/strong\u003e It uses a rocker arm base, which lets the 14 foot pole flex to absorb wake, wind, and tidal motion rather than transferring that force directly to the dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the PMW.1400 mooring whip pole made of?\u003c\/strong\u003e The pole on the Taylor Made PMW.1400 is fiberglass, chosen for its strength and resistance to corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the PMW.1400 mooring whip weigh?\u003c\/strong\u003e 35.5 pounds is the weight of the Taylor Made PMW.1400 Premium Mooring Whip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the shipping dimensions of the PMW.1400?\u003c\/strong\u003e The PMW.1400 mooring whip ships in a package measuring 88 x 7 x 5.8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when you order the PMW.1400?\u003c\/strong\u003e One mooring whip (the 14 foot rocker arm base pole assembly) is included per PMW.1400 unit; a complete mooring setup typically uses two whips plus separate mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a mooring whip do?\u003c\/strong\u003e A mooring whip like the PMW.1400 holds a boat off to the side of a dock or piling, keeping it away from pilings and dock structures to reduce rubbing and impact damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the PMW.1400 make it easy to retrieve the pole when boarding?\u003c\/strong\u003e Yes, the PMW.1400 has a low friction tip and a whip cleat built in specifically to make retrieving and securing the pole easier when boarding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PMW.1400 the premium or standard version of Taylor Made's 14 foot whip?\u003c\/strong\u003e PMW.1400 is the Premium 14 foot rocker arm base mooring whip in the Taylor Made lineup, sized for boats up to 33 feet and 20,000 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PMW.1400 suitable for salt water or tidal areas?\u003c\/strong\u003e Yes, the Taylor Made PMW.1400 is built for use in salt water and large tidal areas where wind, wake, and tide movement are significant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between a rocker arm base and a fixed angle base whip?\u003c\/strong\u003e The PMW.1400 uses a rocker arm base, which flexes with boat and wave motion, while a fixed angle base holds the pole at a set angle without that flex.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the pole on the PMW.1400?\u003c\/strong\u003e The Taylor Made PMW.1400 has a 14 foot pole.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989719363803,"sku":"NAT-PMW.1400","price":1158.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/91XRArkp9IS.jpg?v=1784487433"},{"product_id":"tie-down-engineering-26396-backing-plate-hurricane-strap-4-in-x-18-in-7-gauge-dock-hardware-for-piling-hoops","title":"Tie Down Engineering Backing Plate 4 in. X 18 in. Standard Grade Hurricane Strap for Piling Hoops - 26396","description":"\u003cp\u003eThe Tie Down Engineering Backing Plate 26396 is a 4 in. X 18 in. Standard Grade hurricane strap backing plate built for use with piling hoops on boat docks. It measures 18 inches long by 4 inches wide and is fabricated from 7 gauge material, giving it the rigidity needed to spread and reinforce the load where a hurricane strap or piling hoop attaches to a dock piling. Backing plates like the 26396 are used to back up the strap connection point, distributing stress across a wider surface of the piling hoop assembly instead of concentrating it at a single fastener point, which helps the hardware hold up under the repeated load and movement a dock piling connection experiences.\u003c\/p\u003e\u003cp\u003eThis backing plate is part of Tie Down Engineering's dock hardware line and is designed to pair with piling hoop and hurricane strap systems. It ships as a single piece (1 count) and is identified by UPC 081628263961.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 26396\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Backing Plate \/ Hurricane Strap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Standard Grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 4 in. X 18 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge:\u003c\/strong\u003e 7 ga.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended Use:\u003c\/strong\u003e For use with piling hoops\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628263961\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tie Down Engineering 26396 backing plate used for?\u003c\/strong\u003e The 26396 is a Standard Grade backing plate designed for use with piling hoops as part of a hurricane strap dock hardware setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the 26396 backing plate?\u003c\/strong\u003e It measures 4 inches wide by 18 inches long and is made from 7 gauge material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 26396 backing plate weigh?\u003c\/strong\u003e The Tie Down Engineering 26396 backing plate weighs 3.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 26396 backing plate come with a hurricane strap included?\u003c\/strong\u003e The 26396 is the backing plate component itself, listed as a 1-count piece; it is intended for use with a piling hoop and hurricane strap assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat grade is the Tie Down Engineering 26396 backing plate?\u003c\/strong\u003e It is rated Standard Grade, as designated by Tie Down Engineering for the 26396 part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick is the 26396 backing plate?\u003c\/strong\u003e The backing plate is made from 7 gauge material, per its 4 in. X 18 in. X 7 ga. Specification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Tie Down Engineering 26396?\u003c\/strong\u003e The UPC for the 26396 backing plate is 081628263961.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 26396 backing plate sold as a single unit?\u003c\/strong\u003e Yes, the 26396 ships as a single piece (1 count).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes part number 26396?\u003c\/strong\u003e Part number 26396 is manufactured by Tie Down Engineering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other sizes of this backing plate available?\u003c\/strong\u003e Tie Down Engineering offers this backing plate in other lengths, including 4 in. X 15 in., 4 in. X 24 in., and 4 in. X 31 in., each under its own part number; the 26396 specifically is the 4 in. X 18 in. Version.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991655100635,"sku":"T-D-26396","price":11.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/wd__04821.1754918358.500.750.jpg?v=1785188791"},{"product_id":"tie-down-engineering-25491-outside-corner-male-dock-connector-commercial-grade-galvanized-steel-with-1-2-in-welded-tabs","title":"Tie Down Engineering 25491 Outside Corner Dock Bracket, Commercial Grade Male, 1\/2 Inch Welded Tab","description":"\u003cp\u003eThe Tie Down Engineering 25491 is a Commercial Grade outside corner bracket built to join dock sections end-to-end at a 90 degree angle. It is designed to pair with a matching inside corner bracket to secure dock ends, swim floats, ski jump corners, and other marine platforms where two dock sections meet at a corner. This is the male half of the corner joint, fitted with a single 1\/2 inch welded tab; the joint is completed using a 3\/4 inch bolt or pin (sold separately) to pin the male tab into the mating female corner bracket.\u003c\/p\u003e\u003cp\u003eEach leg of the bracket measures 10 inches by 5 inches, giving a solid mounting surface for attaching to dock framing. The bracket is made from galvanized steel, which resists corrosion from constant exposure to fresh or salt water, sun, and weather, making it suited to long-term outdoor dock use. Because this is Commercial Grade hardware with a 1\/2 inch tab, it is intended for higher-load dock and platform applications rather than light-duty setups.\u003c\/p\u003e\u003cp\u003eThis is the male outside corner only. A separate female outside corner bracket is required to complete the corner joint, and inside corner brackets are used elsewhere in the dock layout where sections turn inward instead of outward.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 25491\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Commercial Grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTab Size:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTab Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Type:\u003c\/strong\u003e Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeg Dimensions:\u003c\/strong\u003e 10 inches x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt\/Pin Requirement:\u003c\/strong\u003e 3\/4 inch bolt or pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628254914\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Docks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal dock hardware; not model-specific.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tie Down Engineering 25491 used for?\u003c\/strong\u003e The 25491 is an outside corner bracket that joins two dock sections at a 90 degree angle, used to secure dock ends, swim floats, ski jump corners, and other marine platforms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 25491 a male or female corner bracket?\u003c\/strong\u003e The 25491 is the male outside corner bracket, fitted with a single 1\/2 inch welded tab that pins into a matching female outside corner bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to buy a matching female corner bracket separately?\u003c\/strong\u003e Yes, the 25491 male corner is only half of the joint. A separate female outside corner bracket is required to complete the connection, and it is a different SKU from the 25491.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size bolt or pin does the 25491 joint require?\u003c\/strong\u003e The corner joint made with the 25491 requires a 3\/4 inch bolt or pin to secure the male tab into the female bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 25491 outside corner bracket made from?\u003c\/strong\u003e It is made from galvanized steel, which resists corrosion from ongoing exposure to water and outdoor weather.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of each leg on the 25491?\u003c\/strong\u003e Each leg of the 25491 outside corner bracket measures 10 inches by 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 25491 corner bracket weigh?\u003c\/strong\u003e The Tie Down Engineering 25491 weighs 7.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does Commercial Grade mean for this bracket?\u003c\/strong\u003e Commercial Grade on the 25491 indicates a heavier-duty 1\/2 inch welded tab construction intended for higher-load dock and platform applications compared to lighter-duty hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 25491 be used for inside corners too?\u003c\/strong\u003e No, the 25491 is an outside corner bracket; a separate inside corner bracket is used where dock sections turn inward instead of outward.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 25491 fit a specific boat or dock brand?\u003c\/strong\u003e The 25491 outside corner bracket is universal dock hardware and is not restricted to a specific boat or dock brand model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Tie Down Engineering 25491?\u003c\/strong\u003e The UPC for the Tie Down Engineering 25491 outside corner bracket is 081628254914.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs hardware included with the 25491 bracket?\u003c\/strong\u003e The 25491 ships as the corner bracket itself; the 3\/4 inch bolt or pin needed to complete the joint is not included and is sold separately.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991655264475,"sku":"T-D-25491","price":41.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__60531.1763741653.500.750.jpg?v=1785188073"},{"product_id":"tie-down-engineering-26400-outside-corner-female-commercial-grade-galvanized-steel-modular-dock-corner-bracket","title":"Tie Down Engineering Outside Corner (Female) Dock Bracket, Commercial Grade, 1\/2 Inch Welded Tabs, Part 26400","description":"\u003cp\u003eThe Tie Down Engineering Outside Corner (Female), part 26400, is a Commercial Grade dock corner bracket built for modular dock systems. It is designed to be used in tandem with a matching male outside corner (a separate part number) so the two pieces join to form a complete outside corner joint on a floating or fixed dock frame. This female half features two 1\/2 inch welded tabs for attachment, with each leg of the bracket measuring 10 inches long by 5 inches high, giving installers a solid, wide footprint for securing dock framing members at an outside corner.\u003c\/p\u003e\u003cp\u003eAs packaged, the unit measures 13.87 x 10.25 x 5 inches and weighs 8.48 pounds, and it ships as a single piece (package quantity of 1). Because it is the female half of a two-part corner system, it must be paired with the corresponding male outside corner to complete the joint; the male corner is sold under its own part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 26400\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outside Corner (Female)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Commercial Grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWelded Tabs:\u003c\/strong\u003e Two 1\/2 inch welded tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeg Dimensions:\u003c\/strong\u003e 10 inches long x 5 inches high (each leg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 13.87 x 10.25 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.48 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628264005\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Docks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Tie Down Engineering part 26400?\u003c\/strong\u003e Part 26400 is the Commercial Grade Outside Corner (Female) dock bracket from Tie Down Engineering, built with two 1\/2 inch welded tabs for mounting to a dock frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 26400 outside corner work with a male outside corner?\u003c\/strong\u003e Yes, the Outside Corner (Female), part 26400, is designed to be used in tandem with a matching male outside corner, which is a separate part number, to complete a modular dock corner joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the leg dimensions on this bracket?\u003c\/strong\u003e Each leg of the Tie Down Engineering 26400 Outside Corner (Female) measures 10 inches long by 5 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does part 26400 weigh?\u003c\/strong\u003e The Tie Down Engineering Outside Corner (Female), part 26400, weighs 8.48 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall packaged dimensions?\u003c\/strong\u003e As packaged, part 26400 measures 13.87 x 10.25 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many welded tabs does this corner bracket have?\u003c\/strong\u003e The 26400 Outside Corner (Female) has two 1\/2 inch welded tabs for attaching it to the dock frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the Standard Grade or Commercial Grade version?\u003c\/strong\u003e Part 26400 is the Commercial Grade version with 1\/2 inch welded tabs. Tie Down Engineering also offers a Standard Grade 1\/2 inch tab version and a Commercial Grade 3\/4 inch tab version under different part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces are included in the package?\u003c\/strong\u003e The Tie Down Engineering 26400 Outside Corner (Female) ships with a package quantity of 1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this dock corner bracket?\u003c\/strong\u003e The UPC for the Tie Down Engineering Outside Corner (Female), part 26400, is 081628264005.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 26400 outside corner be used by itself?\u003c\/strong\u003e No, part 26400 is the female half of a two-piece corner joint and must be paired with a corresponding male outside corner, sold separately, to complete the assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the male outside corner included with part 26400?\u003c\/strong\u003e No, only the female corner bracket (part 26400) is included; the matching male outside corner is a separate part number and must be purchased separately.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991655297243,"sku":"T-D-26400","price":48.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__97255.1763741621.500.750.jpg?v=1785188088"},{"product_id":"tie-down-engineering-26402-outside-corner-end-commercial-grade-galvanized-steel-dock-corner-10-in-x-5-in","title":"Tie Down Engineering 26402 Commercial Grade Outside Corner Dock Bracket, 10 in. X 5 in.","description":"\u003cp\u003eThe Tie Down Engineering 26402 is a Commercial Grade outside corner bracket built for finger docks, swim floats, and ski jump corners. It mounts at the outside end of a dock finger or float frame, where each of its two legs measures 10 inches long by 5 inches high, giving the joint a strong, squared-off connection point. As a Commercial Grade corner, it is built for heavier-duty dock loads than the Standard Grade version in the same size, making it a fit for docks that see frequent traffic or added stress at the corners. The overall footprint of the bracket is 10.25 inches by 10.25 inches at the corner.\u003c\/p\u003e\u003cp\u003eFastener and hardware components used with the 26402 are stainless steel, chosen for resistance to the corrosion that comes with constant freshwater or saltwater exposure. The corner ships as a single piece (quantity of 1) and is designed to work seamlessly alongside matching inside corner brackets from the same product line, allowing a full dock frame to be assembled with consistent, coordinated hardware at every joint.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 26402\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outside Corner (End)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Commercial Grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeg Size:\u003c\/strong\u003e 10 inches x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 10.25 inches L x 10.25 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.72 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628264029\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tie Down Engineering 26402 used for?\u003c\/strong\u003e The 26402 is an outside corner bracket used at the ends of dock fingers and floats, including swim floats and ski jump corners, to strengthen and square off the frame joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this corner bracket?\u003c\/strong\u003e Each leg of the 26402 outside corner measures 10 inches long by 5 inches high, with an overall corner footprint of 10.25 inches by 10.25 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 26402 Standard Grade or Commercial Grade?\u003c\/strong\u003e It is the Commercial Grade version of the 10 in. X 5 in. Outside corner, built for heavier-duty dock applications than the Standard Grade equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the hardware on this bracket made of?\u003c\/strong\u003e The fasteners and hardware supplied with the Tie Down Engineering 26402 are stainless steel for corrosion resistance in dock environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 26402 weigh?\u003c\/strong\u003e The Tie Down Engineering 26402 outside corner weighs 6.72 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in a purchase of the 26402?\u003c\/strong\u003e One outside corner bracket is included per unit purchased.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 26402 work with inside corner brackets on the same dock?\u003c\/strong\u003e Yes, the 26402 outside corner is designed to work alongside matching inside corner brackets from the Tie Down Engineering line for a complete, coordinated dock frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 26402 an inside corner or an outside corner?\u003c\/strong\u003e The 26402 is an outside corner (end) bracket, used at the outer ends of dock fingers and floats rather than inside frame corners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Tie Down Engineering 26402?\u003c\/strong\u003e The UPC for the 26402 outside corner is 081628264029.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 26402 be used on ski jump corners?\u003c\/strong\u003e Yes, the Tie Down Engineering 26402 is suited for use at ski jump corners as well as standard finger dock and swim float ends.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991655395547,"sku":"T-D-26402","price":31.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__74974.1755111439.500.750.jpg?v=1785188598"},{"product_id":"tie-down-engineering-26406-heavy-duty-angle-bracket-2-1-2-in-x-5-in-for-floating-dock-cross-supports","title":"Tie Down Engineering Angle Bracket 26406, 2-1\/2 in. X 5 in., for Floating Dock Cross Supports","description":"\u003cp\u003eThe Tie Down Engineering Angle Bracket 26406 is a heavy-duty angle bracket sized 2-1\/2 in. X 5 in., built for use on floating dock cross supports. It is part of Tie Down Engineering's angle bracket lineup for boat dock construction, where anglers, dock builders, and marina maintenance crews use these brackets to reinforce the joints where cross members meet dock framing. The bracket weighs 1.61 pounds, giving it enough mass and material presence to handle structural connection points on a floating dock without adding unnecessary bulk. Because it is designed specifically for cross supports, it is intended to be installed at the points where dock framing members intersect, helping distribute load and keep the dock structure rigid over time in a wet, outdoor marine environment. This part carries UPC 081628264067 and falls under the Boat Docks hardware category, making it straightforward to identify and order the correct size for a dock repair or new-build project. Buyers replacing worn or damaged angle brackets on an existing floating dock, or assembling new dock sections, can use the 26406 to match the original 2-1\/2 in. X 5 in. Footprint.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 26406\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Docks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2-1\/2 in. X 5 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.61 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628264067\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Cross supports on floating docks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Heavy-duty angle bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tie Down Engineering Angle Bracket 26406 used for?\u003c\/strong\u003e The 26406 angle bracket is used for cross supports on floating docks, reinforcing the joints where dock framing members connect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is part number 26406?\u003c\/strong\u003e Part number 26406 measures 2-1\/2 in. X 5 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 26406 angle bracket weigh?\u003c\/strong\u003e It weighs 1.61 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the 26406 dock angle bracket?\u003c\/strong\u003e Tie Down Engineering manufactures the 26406 angle bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Tie Down Engineering 26406 bracket?\u003c\/strong\u003e The UPC for this angle bracket is 081628264067.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 26406 bracket heavy-duty?\u003c\/strong\u003e Yes, the 26406 is built as a heavy-duty angle bracket for structural dock connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of hardware does part 26406 fall under?\u003c\/strong\u003e The 26406 angle bracket is categorized as boat dock hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 26406 angle bracket be used on a new dock build as well as repairs?\u003c\/strong\u003e Yes, the 2-1\/2 in. X 5 in. 26406 bracket can be used both for repairing existing floating dock cross supports and for new dock construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 26406 bracket come in other sizes?\u003c\/strong\u003e Tie Down Engineering offers this angle bracket design in other sizes under different part numbers, but 26406 specifically refers to the 2-1\/2 in. X 5 in. Version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere on a floating dock is the 26406 bracket installed?\u003c\/strong\u003e It is installed at cross support joints, where dock framing members intersect, to reinforce the connection.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991655493851,"sku":"T-D-26406","price":8.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__34088.1763741622.500.750.jpg?v=1785188516"},{"product_id":"tie-down-engineering-26403-heavy-duty-inside-corner-bracket-commercial-grade-8-1-4-in-x-5-in-with-2-1-4-in-elongated-holes","title":"Tie Down Engineering Inside Corner Bracket 26403, Commercial Grade, 8-1\/4 x 5 Inch, 2-1\/4 Inch Elongated Holes","description":"\u003cp\u003eThe Tie Down Engineering 26403 is a Commercial Grade inside corner bracket built to align and support ramp entry points on boat docks. Measuring 8-1\/4 inches by 5 inches, each leg of the bracket features 2-1\/4 inch elongated holes that allow for adjustment during installation, making it easier to line up framing members precisely before final fastening. As an inside corner, this bracket is designed to be installed alongside a matching outside corner bracket to complete a squared dock or ramp frame joint; it is not intended to be used alone. The commercial-grade construction is intended for the higher demands of dock and ramp assemblies that see repeated loading from foot and vehicle traffic, boarding, and marine environmental exposure. It carries a polished finish. This bracket is part of a broader Tie Down Engineering inside corner lineup that also includes Standard Grade and other Commercial Grade configurations with different hole sizes and shapes, so buyers should confirm the 2-1\/4 inch elongated hole spec matches their existing hardware before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 26403\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Commercial Grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Type:\u003c\/strong\u003e Inside Corner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 8-1\/4 inches x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Type:\u003c\/strong\u003e 2-1\/4 inch elongated holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.68 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 6 x 9 x 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628264036\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Docks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsage Note:\u003c\/strong\u003e Should be used with a matching outside corner bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal boat dock and ramp frame construction; not engine or vehicle specific.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers apply to this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tie Down Engineering 26403 used for?\u003c\/strong\u003e The 26403 is an inside corner bracket used to align and support ramp entry points and squared corner joints on boat dock and ramp frames.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bracket need to be paired with another part?\u003c\/strong\u003e Yes, the 26403 inside corner bracket is designed to be used together with a matching outside corner bracket to complete the frame joint; it is not a standalone corner solution.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the mounting holes on the 26403?\u003c\/strong\u003e Each leg of the 26403 has 2-1\/4 inch elongated holes, which allow for some adjustment when aligning the frame during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this bracket?\u003c\/strong\u003e The Tie Down Engineering 26403 measures 8-1\/4 inches by 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 26403 bracket weigh?\u003c\/strong\u003e The 26403 weighs 5.68 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 26403 a Standard or Commercial Grade bracket?\u003c\/strong\u003e It is a Commercial Grade bracket, built for the higher-demand loading conditions typical of dock and ramp installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 26403 have?\u003c\/strong\u003e The 26403 has a polished finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bracket for the inside or outside corner of a dock frame?\u003c\/strong\u003e The 26403 is specifically an inside corner bracket; a separate outside corner bracket, sold under a different part number, is needed to complete the joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other hole configurations available in this bracket size?\u003c\/strong\u003e Yes, Tie Down Engineering offers the same 8-1\/4 x 5 inch commercial grade footprint with 3 inch elongated holes (part 26417) or square holes (part 26401), in addition to the 2-1\/4 inch elongated holes on the 26403.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this and the Standard Grade version?\u003c\/strong\u003e The Standard Grade version (part 26524) shares the same 8-1\/4 x 5 inch size but uses 2 inch elongated holes, compared to the 2-1\/4 inch elongated holes and Commercial Grade construction of the 26403.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is the 26403?\u003c\/strong\u003e The 26403 inside corner bracket is categorized as a boat dock hardware component.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991655559387,"sku":"T-D-26403","price":34.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61GIV6oCX7L.jpg?v=1784509423"},{"product_id":"tie-down-engineering-26408-male-t-connector-for-floating-dock-systems-commercial-grade","title":"Tie Down Engineering Male T Connector, Commercial Grade with 3\/4 in. Tab, Part 26408","description":"\u003cp\u003eThe Tie Down Engineering Male T Connector, part number 26408, is a Commercial Grade dock hardware fitting used to join dock sections, fingers, and ramps into a stable connection point. It is built with a single welded 3\/4 in. Tab that mates with a Female T Connector to create the joint, and it uses a.562 in. Square hole pattern spaced 3.5 in. On center to match Commercial Grade dock framing. This Male T Connector measures 5 x 5 x 1 inches and weighs 2.7 pounds, giving it the mass and bearing surface needed for repeated foot traffic and boat loading at a marina or private dock. A bolt set (bolt set \"N\") is required to complete the joint and is ordered separately. Because this is the Commercial Grade version, it is sized and drilled to work with other Commercial Grade Tie Down Engineering dock hardware rather than the Standard Grade line, which uses a smaller.438 in. Hole pattern. This connector is intended for dock builders and marina maintenance crews assembling or repairing modular floating or fixed dock systems, anywhere a finger, ramp, or side section needs to attach at a T-shaped junction. Pair it with the matching Female T Connector to complete the connection.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 26408\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Commercial Grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTab:\u003c\/strong\u003e One welded 3\/4 in. Tab\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Pattern:\u003c\/strong\u003e.562 in. Square holes, 3.5 in. On center\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5 x 5 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628264081\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal Commercial Grade dock hardware; designed to connect with Tie Down Engineering Commercial Grade dock sections, fingers, and ramps using the.562 in. Square hole pattern on 3.5 in. Centers.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tie Down Engineering Male T Connector used for?\u003c\/strong\u003e Part number 26408 is a Commercial Grade dock hardware fitting used to join dock sections, fingers, or ramps at a T-shaped connection point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Male T Connector, part 26408?\u003c\/strong\u003e It measures 5 x 5 x 1 inches and weighs 2.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 26408 connector work with Standard Grade dock hardware?\u003c\/strong\u003e No. The 26408 is Commercial Grade with a.562 in. Square hole pattern on 3.5 in. Centers, which differs from the Standard Grade hole pattern of.438 in. Square holes, so it should be matched with other Commercial Grade components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Male T Connector attach to the dock?\u003c\/strong\u003e It has one welded 3\/4 in. Tab that mates with a Female T Connector, and a bolt set (bolt set \"N\") is required to complete the joint; the bolt set is ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Female T Connector included with part 26408?\u003c\/strong\u003e No, part 26408 is the Male T Connector only. The mating Female T Connector is a separate part with its own part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hole spacing on the 26408 T Connector?\u003c\/strong\u003e The hole pattern is.562 in. Square holes spaced 3.5 in. On center.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat grade is the Tie Down Engineering 26408 connector?\u003c\/strong\u003e It is the Commercial Grade version, built for heavier-duty dock applications than the Standard Grade line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many tabs does the Male T Connector have?\u003c\/strong\u003e The 26408 Male T Connector has one welded 3\/4 in. Tab.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bolt set included with the Male T Connector?\u003c\/strong\u003e No. Joining the 26408 Male T Connector to a Female T Connector requires bolt set \"N\", which is purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Tie Down Engineering part?\u003c\/strong\u003e Yes, part 26408 is a genuine Tie Down Engineering Male T Connector, not an aftermarket equivalent.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991655723227,"sku":"T-D-26408","price":22.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__48110.1763741653.500.750.jpg?v=1785188167"},{"product_id":"tie-down-engineering-26407-female-t-connector-commercial-grade-5-in-x-5-in-dock-hardware-with-1-2-in-tabs","title":"Tie Down Engineering Female T-Connector 26407, Commercial Grade, 5 in. X 5 in. Stainless Steel Dock Hardware","description":"\u003cp\u003eThe Tie Down Engineering Female T-Connector (Part No. 26407) is Commercial Grade dock hardware designed to bolt to the side of a dock to attach fingers and ramps, giving builders and dock installers a strong, corrosion-resistant connection point between structural members. The plate measures 5 in. X 5 in. And features.562 in. Square holes on 3.5 in. Centers, with 1\/2 in. Tabs that engage a matching male connector to lock dock sections together securely. Both the fastener hardware and the plate hardware are made of stainless steel for long-term durability in fresh and saltwater marine environments, and the connector has a silver finish that resists rust and staining over repeated wet\/dry cycles. This is a single-piece connector (one T-connector per package) intended for use as part of a floating or fixed dock frame assembly, where it distributes load across the bolted joint and helps prevent the frame from racking or separating under foot traffic and wave action. Because it is Commercial Grade, it is built for higher-load applications such as marinas, commercial docks, and heavy-use residential docks, not just light-duty setups. Installation is straightforward: the plate is bolted through its square holes to the dock frame members at the point where a finger or ramp section meets the main dock, with the tabs oriented to receive the mating male connector piece.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 26407\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Commercial Grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5 in. X 5 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Pattern:\u003c\/strong\u003e.562 in. Square holes, 3.5 in. On center\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTab Size:\u003c\/strong\u003e 1\/2 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.44 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628264074\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tie Down Engineering Female T-Connector used for?\u003c\/strong\u003e The Female T-Connector (Part No. 26407) bolts to the side of a dock to attach fingers and ramps, providing a secure connection point between dock frame sections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is part number 26407?\u003c\/strong\u003e This connector plate measures 5 in. X 5 in. With.562 in. Square holes spaced 3.5 in. On center.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 26407 T-Connector Commercial Grade or Standard Grade?\u003c\/strong\u003e Part number 26407 is the Commercial Grade version of the Female T-Connector, suited to higher-load dock applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Female T-Connector made from?\u003c\/strong\u003e Both the connector plate and its fasteners are stainless steel, giving 26407 corrosion resistance for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the tabs on this connector?\u003c\/strong\u003e The Tie Down Engineering Female T-Connector 26407 has 1\/2 in. Tabs that engage a mating male connector piece.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 26407 T-Connector weigh?\u003c\/strong\u003e The Female T-Connector, part number 26407, weighs 3.44 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in the package?\u003c\/strong\u003e The 26407 Female T-Connector ships as a single piece (one connector per package).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does 26407 have?\u003c\/strong\u003e This connector has a silver finish, consistent with its stainless steel construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Female T-Connector installed?\u003c\/strong\u003e The 26407 plate is bolted through its square hole pattern to the dock frame at the point where a finger or ramp section attaches, with the tabs positioned to receive the mating male connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the male or female connector?\u003c\/strong\u003e Part number 26407 is the female half of the T-connector pair; it is designed to mate with a corresponding male connector piece.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Tie Down Engineering 26407 connector?\u003c\/strong\u003e The UPC for the Female T-Connector, part number 26407, is 081628264074.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991655755995,"sku":"T-D-26407","price":30.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__01613.1755102584.500.750.jpg?v=1785188748"},{"product_id":"tie-down-26413-back-up-plate-5-x-5-commercial-grade-steel-reinforcing-plate-for-single-t-males-and-females","title":"Tie Down Engineering 26413 Commercial Grade 5 in. X 5 in. Back-Up Plate for Single T Male and Female Dock Hardware","description":"\u003cp\u003eThe Tie Down Engineering 26413 is a commercial grade 5 in. X 5 in. Back-up plate designed to reinforce Single T Male and Single T Female dock hardware connections. When mounted on the underside of a dock section opposite a Single T fitting, the plate spreads the load across a wider area of decking, reducing the chance of the fitting pulling through or working loose under repeated stress from boat traffic, wave action, and everyday dock use. This is a straightforward, functional hardware component built for durability in demanding marine and dock environments rather than for visible finish or styling.\u003c\/p\u003e\u003cp\u003eThe plate is punched with.562 in. Square holes spaced 3.5 in. On-center to align with the mounting pattern of compatible Single T Male and Female fittings, allowing the bolts or fasteners running through the fitting to pass through the plate and clamp the assembly together from both sides of the dock decking. At 1.7 pounds, it is substantial enough to distribute load without adding excessive weight to the dock structure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 26413\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Commercial Grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlate Size:\u003c\/strong\u003e 5 in. X 5 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Pattern:\u003c\/strong\u003e.562 in. Square holes, 3.5 in. On-center\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628264135\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Docks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUsed to back up Single T Male and Single T Female dock hardware fittings.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tie Down Engineering 26413 used for?\u003c\/strong\u003e It is a 5 in. X 5 in. Back-up plate used to back up Single T Male and Single T Female dock hardware fittings, spreading the fastening load across more of the dock decking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the mounting holes?\u003c\/strong\u003e The 26413 back-up plate has.562 in. Square holes spaced 3.5 in. On-center to match compatible Single T Male and Female fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 26413 back-up plate weigh?\u003c\/strong\u003e It weighs 1.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this plate?\u003c\/strong\u003e The Tie Down Engineering 26413 is a 5 in. X 5 in. Back-up plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 26413 rated for commercial use?\u003c\/strong\u003e Yes, it is designated Commercial Grade, intended for demanding dock and marine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fittings is this back-up plate compatible with?\u003c\/strong\u003e The 26413 is sized to back up Single T Male and Single T Female dock hardware fittings, with a hole pattern matching those fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 26413 come with mounting hardware?\u003c\/strong\u003e The listing covers the 5 in. X 5 in. Back-up plate itself (part number 26413); it is used alongside the Single T Male or Female fitting it backs up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this back-up plate installed?\u003c\/strong\u003e It mounts on the dock decking opposite a Single T Male or Female fitting so the two clamp together through the shared.562 in. Square hole pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part number 26413 the correct one to order?\u003c\/strong\u003e 26413 is the Tie Down Engineering part number for this specific 5 in. X 5 in. Commercial grade back-up plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of dock hardware does the 26413 belong to?\u003c\/strong\u003e The 26413 is classified as boat dock hardware, specifically a back-up plate accessory.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991655919835,"sku":"T-D-26413","price":7.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/xas__05269.1754918123.500.750.jpg?v=1785188282"},{"product_id":"tie-down-engineering-26431-inside-roller-ramp-bracket-galvanized-steel-left-and-right-pair-commercial-grade","title":"Tie Down Engineering Inside Roller Ramp Bracket 26431, Galvanized Steel with Rubber Roller, 5 x 11 x 1\/4 Inch, Left and Right Pair","description":"\u003cp\u003eThe Tie Down Engineering Inside Roller Ramp Bracket (part number 26431) is a galvanized steel bracket used to join a boat dock section to a ramp, creating a smooth, secure transition point. Each bracket is fitted with a rubber roller that allows the connection to roll and flex as water levels and dock position shift, rather than binding or grinding at a fixed hinge point. This rolling action reduces wear on both the dock and ramp sections at the connection point over repeated use.\u003c\/p\u003e\u003cp\u003eThe bracket measures 5 inches by 11 inches by 1\/4 inch and is built from galvanized steel for corrosion resistance in freshwater and saltwater dock environments. It is a foldable design, and each package includes one left bracket and one right bracket, sold as a pair, so a single package outfits one dock-to-ramp connection point. This is the rubber roller version of the bracket; Tie Down Engineering also offers the same bracket with a UHMW plastic roller under a separate part number for buyers who prefer that roller material.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 26431\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Inside Roller Ramp Bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoller Type:\u003c\/strong\u003e Rubber Roller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5 inches x 11 inches x 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e 1 left bracket, 1 right bracket (1 pair per package)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoldable:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628264319\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Dock Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for use on modular boat dock and ramp connection points; fits standard dock-to-ramp joining applications.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tie Down Engineering Inside Roller Ramp Bracket used for?\u003c\/strong\u003e It joins a boat dock section to a ramp at a rolling connection point, letting the two sections shift smoothly relative to each other as water levels change; part number 26431 is the rubber roller version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes part 26431 come with both a left and a right bracket?\u003c\/strong\u003e Yes, each package of the Inside Roller Ramp Bracket 26431 includes one left bracket and one right bracket, sold as a pair for a single dock-to-ramp connection point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this ramp bracket?\u003c\/strong\u003e The Tie Down Engineering Inside Roller Ramp Bracket 26431 measures 5 inches by 11 inches by 1\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the bracket made of?\u003c\/strong\u003e It is made of galvanized steel, which resists corrosion in freshwater and saltwater dock environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the bracket pair weigh?\u003c\/strong\u003e The pair of Inside Roller Ramp Brackets, part 26431, weighs 16.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of roller does part number 26431 have?\u003c\/strong\u003e Part 26431 is fitted with a rubber roller that provides smooth rolling action at the dock-to-ramp connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a version with a different roller material?\u003c\/strong\u003e Yes, Tie Down Engineering also makes this same style of bracket with a UHMW plastic roller instead of rubber, listed under a different part number, for buyers who prefer that roller material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bracket foldable?\u003c\/strong\u003e Yes, the Inside Roller Ramp Bracket 26431 is a foldable design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Tie Down Engineering part?\u003c\/strong\u003e Yes, part number 26431 is a genuine Tie Down Engineering Inside Roller Ramp Bracket, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the package?\u003c\/strong\u003e One package of part 26431 includes a matched left and right Inside Roller Ramp Bracket, making one complete pair.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991659917531,"sku":"T-D-26431","price":166.77,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/26431__61282.1722516973.500.750.jpg?v=1785188444"},{"product_id":"tie-down-engineering-26417-inside-corner-dock-bracket-commercial-grade-galvanized-steel-8-1-4-in-x-5-in-with-3-in-elongated-holes","title":"Tie Down Engineering Inside Corner Dock Bracket, Commercial Grade, 8-1\/4 in. X 5 in. With 3 in. Elongated Holes, Part 26417","description":"\u003cp\u003eThe Tie Down Engineering Inside Corner (Part 26417) is a commercial grade dock bracket built to reinforce and square the inside corners of a boat dock frame. It measures 8-1\/4 inches by 5 inches, and each leg is fitted with 3 inch elongated holes that make it easier to line up and fasten during installation without needing exact hole spacing. The bracket carries a silver finish and stainless steel hardware, giving it corrosion resistance suited to freshwater and saltwater dock environments. Package quantity is 1 bracket.\u003c\/p\u003e\u003cp\u003eThis is an inside corner piece and is intended to be used together with a matching outside corner bracket to complete a full corner joint on a dock frame; the outside corner is a separate part number. Tie Down Engineering also offers this same 8-1\/4 in. X 5 in. Commercial grade corner in other hole configurations, including 2-1\/4 inch elongated holes and square holes, each under its own part number, so dock builders can match the bracket to their existing hardware pattern.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 26417\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Inside Corner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Commercial Grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 8-1\/4 inches x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Type:\u003c\/strong\u003e 3 inch elongated holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628264173\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tie Down Engineering 26417 bracket used for?\u003c\/strong\u003e Part 26417 is a commercial grade Inside Corner bracket used to reinforce and square an inside corner joint on a boat dock frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the 26417 Inside Corner?\u003c\/strong\u003e It measures 8-1\/4 inches by 5 inches, with 3 inch elongated holes on each leg.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does it have elongated holes instead of round holes?\u003c\/strong\u003e The 3 inch elongated holes on the 26417 Inside Corner give installers flexibility to line up fasteners without needing exact hole spacing on the dock frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 26417 an inside corner or an outside corner bracket?\u003c\/strong\u003e It is an Inside Corner bracket; it should be paired with a matching outside corner bracket, which is a separate part number, to complete a full corner assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Tie Down 26417 bracket made from?\u003c\/strong\u003e It uses stainless steel hardware with a silver finish, giving the 26417 Inside Corner corrosion resistance for dock use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 26417 Inside Corner weigh?\u003c\/strong\u003e The Tie Down Engineering 26417 Inside Corner weighs 6.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many brackets come in a package?\u003c\/strong\u003e Part 26417 ships with a package quantity of 1 bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for part 26417?\u003c\/strong\u003e The UPC for the Tie Down Engineering 26417 Inside Corner is 081628264173.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Tie Down Engineering make this bracket with other hole sizes?\u003c\/strong\u003e Yes, the same 8-1\/4 inch by 5 inch commercial grade Inside Corner is also available with 2-1\/4 inch elongated holes and with square holes, each sold under its own part number rather than 26417.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 26417 bracket commercial grade?\u003c\/strong\u003e Yes, part 26417 is Tie Down Engineering's commercial grade Inside Corner bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use one 26417 bracket alone for a dock corner?\u003c\/strong\u003e No, the 26417 Inside Corner is meant to be used together with a matching outside corner bracket to complete the corner joint.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991659950299,"sku":"T-D-26417","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81t3_Jrxq_L.jpg?v=1784509511"},{"product_id":"tie-down-engineering-26423-hd-piling-hoop-roller-14-in-commercial-grade-steel-dock-piling-guide","title":"Tie Down Engineering 26423 HD Plate Hoop Roller, Commercial Grade, Fits Pilings up to 14 in.","description":"\u003cp\u003eThe Tie Down Engineering HD Plate Hoop Roller (26423) is a commercial grade dock accessory that fits around a boat piling and lets a roller travel smoothly up and down the piling face as water levels rise and fall with tides or wakes. It is built to accommodate pilings up to 14 in. Wide, making it a practical guide for docks and boat lifts where the piling diameter falls within that range. The unit measures 14-1\/4 in. X 4-1\/4 in. X 22-1\/2 in. And is constructed of commercial grade steel for durability in a marine dock environment.\u003c\/p\u003e\u003cp\u003eThis hoop roller is designed to keep a boat or dock structure properly guided against the piling without binding, reducing wear on both the piling and the dock hardware during normal water movement. Its commercial grade construction is intended for repeated outdoor and wet-environment use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 26423\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Docks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 14-1\/4 in. X 4-1\/4 in. X 22-1\/2 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Piling Width:\u003c\/strong\u003e 14 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 36 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Commercial Grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628264234\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tie Down Engineering 26423 HD Plate Hoop Roller used for?\u003c\/strong\u003e It is a dock hoop that fits around a boat piling and uses a roller to allow smooth up and down movement as water levels change, guiding the dock or lift against the piling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size pilings does part number 26423 fit?\u003c\/strong\u003e The 26423 HD Plate Hoop Roller accommodates pilings up to 14 in. Wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 26423 hoop roller weigh?\u003c\/strong\u003e It weighs 36 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Tie Down Engineering 26423?\u003c\/strong\u003e The unit measures 14-1\/4 in. X 4-1\/4 in. X 22-1\/2 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the HD Plate Hoop Roller made from?\u003c\/strong\u003e It is made of commercial grade steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 26423 rated for commercial use?\u003c\/strong\u003e Yes, Tie Down Engineering classifies the 26423 as a commercial grade product, suitable for repeated dock and marina use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 26423 different from Tie Down Engineering's Chain Pile Holder (26419)?\u003c\/strong\u003e The 26423 HD Plate Hoop Roller uses a roller against the piling for smooth vertical movement, while the Chain Pile Holder (26419) secures a 3\/8 in. Galvanized chain with shackles around the piling instead; they are separate part numbers for different mounting approaches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 26423 the same as Tie Down Engineering's Piling Hoop (26429)?\u003c\/strong\u003e No, part number 26429 is a separate Piling Hoop sized for pilings from 8 in. To 14 in. In diameter using a fixed hoop design, whereas the 26423 is the HD Plate Hoop Roller sized for pilings up to 14 in. Wide with a roller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 26423 include mounting hardware?\u003c\/strong\u003e The dossier for the 26423 HD Plate Hoop Roller does not list separate mounting hardware as included; it is supplied as the hoop roller unit itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 26423 hoop roller be used on square pilings?\u003c\/strong\u003e Tie Down Engineering specifies the 26423 as fitting pilings up to 14 in. Wide; no distinction between round and square piling shapes is given in the available specifications.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991660048603,"sku":"T-D-26423","price":299.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/26423__88028.1722506640.500.750.jpg?v=1785188418"},{"product_id":"tie-down-engineering-26531-connector-pin-set-3-4-in-commercial-grade-dock-pin-with-chain-and-cotter-ring","title":"Tie Down Engineering 26531 Commercial Grade Connector Pin, 3 Inch, Galvanized Steel Dock Hardware","description":"\u003cp\u003eThe Tie Down Engineering 26531 is a 3 inch Commercial Grade connector pin used to join male and female T connectors in a modular dock float connector system. It secures the connection between outside corner and matching dock hardware pieces, holding the sections together under repeated seasonal use on the water. The pin ships with a chain and cotter ring attached so the pin cannot be lost or dropped in the water during connection or disconnection, making it easy to link or separate dock sections quickly without searching for loose hardware.\u003c\/p\u003e\u003cp\u003eConstructed from galvanized steel, the 26531 pin resists corrosion from constant exposure to fresh or salt water, sun, and weather. It measures 3 inches in length with a 0.75 inch pin diameter, sized for the commercial grade connector series. This Commercial Grade pin is also available in a 6 inch long length (a separate part number) for configurations that require additional reach; the 26531 is the standard 3 inch version.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 26531\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Commercial Grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Length:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Diameter:\u003c\/strong\u003e 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4.49 x 3.5 x 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Attached chain and cotter ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628265316\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Tie Down Engineering outside corner and T connector dock hardware sized for the Commercial Grade 3\/4 inch pin connection.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tie Down Engineering 26531 pin used for?\u003c\/strong\u003e The 26531 is a Commercial Grade connector pin used to connect male and female T connectors in a dock float connector system, securing the sections together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length is the 26531 connector pin?\u003c\/strong\u003e The 26531 is 3 inches long, which is the standard length in the Commercial Grade pin line; a 6 inch long version is also available as a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pin diameter?\u003c\/strong\u003e This connector pin has a 0.75 inch (3\/4 inch) diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 26531 pin made from?\u003c\/strong\u003e It is made from galvanized steel for corrosion resistance in fresh and salt water dock environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the pin come with anything to prevent losing it?\u003c\/strong\u003e Yes, the 26531 includes an attached chain and cotter ring so the pin cannot be lost or dropped in the water when disconnecting dock sections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 26531?\u003c\/strong\u003e The connector pin measures approximately 4.49 x 3.5 x 0.75 inches overall, including the attached chain and cotter ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 26531 weigh?\u003c\/strong\u003e The Tie Down Engineering 26531 connector pin weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the Standard or Commercial Grade version?\u003c\/strong\u003e Part number 26531 is the Commercial Grade 3 inch connector pin in the Tie Down Engineering dock hardware lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 26531 fit long-length dock configurations?\u003c\/strong\u003e The 26531 is the 3 inch standard length pin; for configurations needing extra length, Tie Down Engineering offers a 6 inch long Commercial Grade pin as a different part number (26538).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The Tie Down Engineering 26531 connector pin has UPC 081628265316.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 26531 pin sold as a single piece?\u003c\/strong\u003e Yes, the 26531 is sold as one connector pin with its attached chain and cotter ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware does the 26531 pin connect?\u003c\/strong\u003e It connects male and female T connectors used in modular dock float connector systems, such as outside corner pieces.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991660081371,"sku":"T-D-26531","price":10.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__55651.1754918540.500.750.jpg?v=1785188910"},{"product_id":"tie-down-engineering-26415-piling-hoop-roller-assembly-commercial-grade-fits-pilings-up-to-12-in","title":"Tie Down Engineering Piling Hoop and Roller Assembly, Rubber Roller, Commercial Grade, Fits Pilings up to 12 Inches, P\/N 26415","description":"\u003cp\u003eThe Tie Down Engineering Piling Hoop and Roller Assembly, P\/N 26415, is dock hardware built for boat docks and lifts exposed to changing tides, current, and wind. It combines the Piling Hoop (Model 26412) with a Rubber Roller Assembly (Model 26414) so the hoop rides smoothly up and down the piling as water levels change, instead of binding or scraping against the wood or pipe. The rubber roller reduces friction and wear on both the hoop and the piling, letting the dock, float, or lift structure follow tidal movement without manual adjustment.\u003c\/p\u003e\u003cp\u003eThis assembly is Commercial Grade, with a roller sized 3\/8 in. X 3 in., and is designed to fit pilings up to 12 inches in diameter. Tie Down Engineering also offers the same hoop and roller design with a UHMW plastic roller (a separate part number) for buyers who prefer a plastic wear surface instead of rubber; both are built around the same hoop-and-roller concept for smooth vertical travel and reduced wear.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 26415\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Piling Hoop and Roller Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoller Type:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Commercial Grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoller Size:\u003c\/strong\u003e 3\/8 inch x 3 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Piling Diameter:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Piling Hoop (Model 26412) and Roller Assembly (Model 26414)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 10.5 inches L x 10.5 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 33.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628264159\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePilings up to 12 inches in diameter\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tie Down Engineering 26415?\u003c\/strong\u003e It is a Piling Hoop and Roller Assembly that combines the Piling Hoop (Model 26412) with a Rubber Roller Assembly (Model 26414), letting a dock or lift ride up and down a piling as water levels change.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size pilings does the 26415 fit?\u003c\/strong\u003e The 26415 piling hoop and roller assembly is designed for pilings up to 12 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the roller on P\/N 26415 rubber or plastic?\u003c\/strong\u003e P\/N 26415 uses a rubber roller. Tie Down Engineering also makes the same hoop and roller assembly with a UHMW plastic roller under a different part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with the 26415 assembly?\u003c\/strong\u003e The assembly includes the Piling Hoop (Model 26412) and the Roller Assembly (Model 26414) as a combined unit, P\/N 26415.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat grade of hardware is this?\u003c\/strong\u003e The 26415 piling hoop and roller assembly is Commercial Grade, with a roller sized 3\/8 inch x 3 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 26415 piling hoop and roller assembly weigh?\u003c\/strong\u003e It weighs 33.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 26415?\u003c\/strong\u003e The Tie Down Engineering 26415 measures 10.5 inches L x 10.5 inches W.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between the 26415 and 26454 rollers?\u003c\/strong\u003e Both are the same piling hoop and roller design; the 26415 uses a rubber roller while the 26454 uses a UHMW plastic roller instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this hoop and roller assembly used?\u003c\/strong\u003e It is intended for boat docks in areas with significant wind, current, or tidal action, where the hoop needs to move freely up and down the piling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs P\/N 26415 a genuine Tie Down Engineering part?\u003c\/strong\u003e Yes, P\/N 26415 is the manufacturer part number for this Tie Down Engineering piling hoop and roller assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the 26415?\u003c\/strong\u003e The UPC for the Tie Down Engineering 26415 piling hoop and roller assembly is 081628264159.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991660114139,"sku":"T-D-26415","price":439.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__49319.1763741653.500.750.jpg?v=1785188267"},{"product_id":"square-tube-aluminum-4-step-dock-ladder","title":"Gen3 Marine Square Tube Aluminum 4-Step Dock Ladder","description":"\u003cp\u003eThe Gen3 Marine Square Tube Aluminum 4-Step Dock Ladder is built from square tube aluminum construction, giving boaters and dock owners a lightweight, corrosion-resistant way to get in and out of the water safely. With four steps, it provides a stable climbing path from the water up to the dock surface, making it a practical addition for swim access, fishing platforms, or general dock use. Aluminum construction keeps the ladder light enough to install and adjust without heavy equipment while standing up to a marine environment better than uncoated steel alternatives. This model is identified by Gen3 Marine part number 7-20400 and is categorized as a dock ladder, designed as a straightforward, functional access solution for dock and waterfront setups.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7-20400\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dock Ladder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Style:\u003c\/strong\u003e Square Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Steps:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037462821\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Gen3 Marine 7-20400 dock ladder made of?\u003c\/strong\u003e The Gen3 Marine 7-20400 is made of square tube aluminum, a lightweight and corrosion-resistant material well suited to dock and waterfront environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many steps does this dock ladder have?\u003c\/strong\u003e This Gen3 Marine dock ladder (part number 7-20400) has 4 steps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Gen3 Marine 7-20400 dock ladder weigh?\u003c\/strong\u003e It weighs 13.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 7-20400 ladder suitable for use in saltwater?\u003c\/strong\u003e Aluminum construction, as used in the Gen3 Marine 7-20400 dock ladder, resists corrosion better than uncoated steel, making it a common material choice for marine and waterfront use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the tube style of this dock ladder?\u003c\/strong\u003e The Gen3 Marine 7-20400 uses square tube aluminum construction rather than round tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is the 7-20400?\u003c\/strong\u003e The Gen3 Marine 7-20400 is listed as a dock ladder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Gen3 Marine 7-20400 come pre-assembled?\u003c\/strong\u003e Assembly details are not specified for the Gen3 Marine 7-20400; buyers should confirm assembly requirements before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this dock ladder?\u003c\/strong\u003e The manufacturer part number is 7-20400, made by Gen3 Marine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this ladder heavy to lift and install?\u003c\/strong\u003e At 13.6 pounds, the Gen3 Marine 7-20400 aluminum dock ladder is light enough for one person to handle during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Gen3 Marine 7-20400 dock ladder?\u003c\/strong\u003e The UPC for this product is 810037462821.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991714443483,"sku":"GEN-7-20400","price":183.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_44cb2037-f364-419e-a97f-09a1054be791.jpg?v=1785349361"},{"product_id":"gen3-marine-7-20300-square-tube-aluminum-3-step-dock-ladder-250-lb-capacity","title":"Gen3 Marine Square Tube Aluminum 3 Step Dock Ladder, 250 lb Capacity","description":"\u003cp\u003eThe Gen3 Marine Square Tube Aluminum 3 Step Dock Ladder gives boaters and swimmers an economical, lightweight way to get in and out of the water at any dock. Built from durable square tube aluminum, this ladder resists corrosion and holds up to regular use around fresh or salt water while staying light enough for straightforward installation. The three steps are wide and angled for comfortable, effortless climbing, and each step surface has light traction treads to help reduce slipping when wet. Large handrails give plenty of room to hold on securely while ascending or descending. The ladder is rated for a 250 pound load capacity, making it suitable for everyday dock use by adults and kids alike. Its lightweight aluminum construction keeps installation simple, and the ladder includes the hardware needed for assembly. Finished in natural aluminum, it fits in visually on most docks without requiring extra paint or coating. This 3 Step model is part of the Gen3 Marine dock ladder lineup, which also includes a 4-step flip-up version with locking pins and a Velcro strap for stowing the ladder out of the water; the 3 Step model reviewed here is the compact, economical entry point for adding safe water access to a dock.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7-20300\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Dock Ladder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteps:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 18 inches W x 49.75 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 250 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Foldable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037462814\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight capacity of this dock ladder?\u003c\/strong\u003e The Gen3 Marine Square Tube Aluminum 3 Step Dock Ladder (7-20300) is rated for a 250 pound load capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the ladder made from?\u003c\/strong\u003e It is made from square tube aluminum, which is lightweight and resists corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many steps does this ladder have?\u003c\/strong\u003e This model has 3 wide, angled steps designed for comfortable, effortless climbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 7-20300 dock ladder?\u003c\/strong\u003e The Gen3 Marine 7-20300 measures 18 inches wide by 49.75 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the dock ladder weigh?\u003c\/strong\u003e The 7-20300 dock ladder weighs 10.5 pounds, keeping installation and handling manageable for one person.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ladder come with hardware for installation?\u003c\/strong\u003e Yes, the Gen3 Marine 3 Step Dock Ladder includes all hardware needed for assembly and installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this ladder slip resistant?\u003c\/strong\u003e The step surfaces have light traction treads that help reduce slipping when the ladder is wet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this 3 step ladder and the Gen3 Marine 4 step model?\u003c\/strong\u003e The 3 Step model (7-20300) is a straightforward, economical ladder, while the Gen3 Marine 4-step version is a flip-up design with dual locking pins and a Velcro strap for stowing it out of the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the dock ladder finished in?\u003c\/strong\u003e The 7-20300 has a natural aluminum finish, giving it a clean look that suits most docks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the handrails easy to hold onto?\u003c\/strong\u003e The Gen3 Marine 3 Step Dock Ladder has large handrails that provide plenty of space for a secure grip when getting in or out of the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this ladder suitable for saltwater use?\u003c\/strong\u003e Its aluminum construction resists corrosion, making the 7-20300 suitable for use in both fresh and salt water.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991714935003,"sku":"GEN-7-20300","price":155.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41xbdI0jMZL.jpg?v=1784510412"},{"product_id":"jif-marine-ash2-5-step-anodized-aluminum-dock-ladder-with-mounting-hardware","title":"JIF Marine ASH2 5-Step Anodized Aluminum Dock Ladder with Mounting Hardware","description":"\u003cp\u003eThe JIF Marine ASH2 is a 5-step dock ladder built from anodized aluminum, designed to give swimmers and boaters a sturdy, corrosion-resistant way to climb out of the water and back onto the dock. The anodized aluminum construction resists corrosion in fresh and salt water environments while keeping the ladder lightweight enough for straightforward dock mounting. Each of the 5 steps features an anti-slip surface to help maintain footing when climbing out of the water, and the ladder is rated for a 300 pound load capacity. It measures 18 inches wide by 73.75 inches high, with a maximum height of 74 inches, making it suitable for a range of dock heights above the waterline. Mounting hardware is included, so the ladder can be installed directly onto a dock without sourcing separate fasteners. Finished in silver, the anodized aluminum surface is built to withstand ongoing exposure to sun and water without rusting like uncoated steel hardware. This ladder is a practical addition for any dock used for swimming, fishing, or boat access, offering a durable, low-maintenance way to get in and out of the water safely.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JIF Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ASH2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Steps:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 18 inches wide x 73.75 inches high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Height:\u003c\/strong\u003e 74 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 300 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 18 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Anti-slip steps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Dock ladder with mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many steps does the JIF Marine ASH2 dock ladder have?\u003c\/strong\u003e The ASH2 dock ladder has 5 steps, each with an anti-slip surface to help with footing when climbing out of the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum height of this dock ladder?\u003c\/strong\u003e The JIF Marine ASH2 has a maximum height of 74 inches, with overall product dimensions of 18 inches wide by 73.75 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat weight can the ASH2 dock ladder support?\u003c\/strong\u003e This ladder is rated for a 300 pound load capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the JIF Marine ASH2 dock ladder made from?\u003c\/strong\u003e It is made from anodized aluminum, which resists corrosion from ongoing exposure to water and sun.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ASH2 dock ladder come with mounting hardware?\u003c\/strong\u003e Yes, the JIF Marine ASH2 includes mounting hardware needed to install it on a dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the JIF Marine ASH2 dock ladder weigh?\u003c\/strong\u003e The ASH2 dock ladder weighs 18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the JIF Marine ASH2 dock ladder?\u003c\/strong\u003e It has a silver finish, consistent with its anodized aluminum construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the JIF Marine ASH2 ladder slip resistant?\u003c\/strong\u003e Yes, each of the 5 steps on the ASH2 has an anti-slip feature to improve traction when climbing out of the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the width of the JIF Marine ASH2 dock ladder?\u003c\/strong\u003e The ladder is 18 inches wide, with a height of 73.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the JIF Marine ASH2 dock ladder suitable for saltwater use?\u003c\/strong\u003e The anodized aluminum construction of the ASH2 is corrosion resistant, making it suitable for use in wet dock environments including saltwater exposure.\u003c\/p\u003e","brand":"JIF Marine","offers":[{"title":"Default Title","offer_id":49025244463323,"sku":"JIF-ASH2","price":228.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/615gHn6bK9L.jpg?v=1785331093"},{"product_id":"jif-marine-ase-3-step-anodized-aluminum-dock-ladder-with-mounting-hardware","title":"JIF Marine ASE 3-Step Anodized Aluminum Dock Ladder with Mounting Hardware","description":"\u003cp\u003eThe JIF Marine ASE is a 3-step anodized aluminum dock ladder built to give swimmers and boaters a secure way to climb out of the water and back onto the dock. Constructed from anodized aluminum, the ladder resists corrosion in fresh and salt water environments while keeping the overall weight manageable for permanent dock mounting. The steps feature an anti-slip surface designed to provide secure footing even when wet, reducing the risk of slips during entry and exit from the water.\u003c\/p\u003e\u003cp\u003eMeasuring 15 inches wide by 54 inches in maximum height with 3 steps, the ASE ladder is rated for a 300 pound load capacity, making it suitable for use by adults and families at the dock. It ships with mounting hardware for attachment to a dock or swim platform structure. The silver anodized finish provides a clean, low-maintenance appearance that holds up to sun and water exposure over time.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JIF Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ASE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Steps:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Anodized Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Width:\u003c\/strong\u003e 15 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Height:\u003c\/strong\u003e 54 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 300 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Anti-Slip\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many steps does the JIF Marine ASE dock ladder have?\u003c\/strong\u003e The JIF Marine ASE dock ladder has 3 steps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight capacity of this dock ladder?\u003c\/strong\u003e The JIF Marine ASE is rated for a 300 pound load capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the ASE dock ladder made from?\u003c\/strong\u003e It is made from anodized aluminum, which resists corrosion from fresh and salt water exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the JIF Marine ASE ladder?\u003c\/strong\u003e The ladder measures 15 inches wide by 54 inches in maximum height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ASE dock ladder include mounting hardware?\u003c\/strong\u003e Yes, the JIF Marine ASE ships with mounting hardware for attachment to a dock or swim platform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the steps slip-resistant?\u003c\/strong\u003e Yes, the steps on the ASE ladder feature an anti-slip surface for secure footing when wet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the JIF Marine ASE ladder?\u003c\/strong\u003e It has a silver anodized aluminum finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the ASE ladder suitable for saltwater use?\u003c\/strong\u003e The anodized aluminum construction of the ASE dock ladder is designed to resist corrosion in both fresh and salt water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this dock ladder?\u003c\/strong\u003e The manufacturer part number is ASE, made by JIF Marine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the JIF Marine ASE dock ladder weigh?\u003c\/strong\u003e The ASE dock ladder weighs 15.5 pounds.\u003c\/p\u003e","brand":"JIF Marine","offers":[{"title":"Default Title","offer_id":49025244561627,"sku":"JIF-ASE","price":168.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61RD9SKP1ML.jpg?v=1785331092"},{"product_id":"jif-marine-ash-4-step-anodized-aluminum-dock-ladder-with-mounting-hardware","title":"JIF Marine ASH 4-Step Anodized Aluminum Dock Ladder with Mounting Hardware","description":"\u003cp\u003eThe JIF Marine ASH is a 4-step anodized aluminum dock ladder built to give swimmers and boaters a secure way to climb out of the water and back onto the dock. Constructed from anodized aluminum for corrosion resistance around fresh and salt water, the ladder features anti-slip steps that provide secure footing when climbing out wet. It measures 18 inches wide by 61.75 inches at maximum height, giving users a stable, extended reach down into the water. The ladder is rated for a 300 pound load capacity and weighs 15 pounds, making it manageable to mount and remove as needed. Mounting hardware is included, so it is ready to install directly onto a dock structure without sourcing separate fasteners. The silver anodized finish resists the wear and tarnishing that dock hardware is exposed to season after season. With four full steps, the ASH ladder is sized for a comfortable, gradual climb rather than a single awkward step up, making it a practical fixture for docks, swim platforms, and waterfront access points where boaters and swimmers need reliable, repeatable entry and exit from the water.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JIF Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ASH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dock Ladder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Anodized Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Steps:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 18 inches wide x 61.75 inches high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Height:\u003c\/strong\u003e 61.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 300 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Anti-Slip Steps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many steps does the JIF Marine ASH dock ladder have?\u003c\/strong\u003e The JIF Marine ASH has 4 steps, giving a gradual climb out of the water rather than a single high step.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the JIF Marine ASH ladder made of?\u003c\/strong\u003e It is made of anodized aluminum with a silver finish, which resists corrosion in fresh and salt water environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the JIF Marine ASH dock ladder?\u003c\/strong\u003e The ASH measures 18 inches wide and 61.75 inches at maximum height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can the JIF Marine ASH ladder support?\u003c\/strong\u003e The ASH dock ladder has a load capacity of 300 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the JIF Marine ASH dock ladder weigh?\u003c\/strong\u003e It weighs 15 pounds, making it manageable to install or remove from a dock by hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the JIF Marine ASH ladder include mounting hardware?\u003c\/strong\u003e Yes, mounting hardware is included with the ASH dock ladder, so no separate fasteners need to be purchased.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the steps on the JIF Marine ASH ladder slippery when wet?\u003c\/strong\u003e No, the ASH ladder has anti-slip steps designed to provide secure footing when climbing out of the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum height of the JIF Marine ASH dock ladder?\u003c\/strong\u003e 61.75 inches is the maximum height of the ASH ladder, measured from its base to the top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the JIF Marine ASH ladder suitable for saltwater use?\u003c\/strong\u003e Yes, its anodized aluminum construction is built to resist corrosion, which suits both freshwater and saltwater dock installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the JIF Marine ASH dock ladder?\u003c\/strong\u003e The ASH ladder has a silver anodized finish.\u003c\/p\u003e","brand":"JIF Marine","offers":[{"title":"Default Title","offer_id":49025244725467,"sku":"JIF-ASH","price":246.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51WbYV7FymL.jpg?v=1785331003"},{"product_id":"jif-marine-3-step-stationary-dock-ladder-anodized-aluminum-750-lb-capacity-djv3","title":"JIF Marine 3-Step Stationary Dock Ladder, Anodized Aluminum, 750 lb Capacity, DJV3","description":"\u003cp\u003eThe JIF Marine 3-Step Stationary Dock Ladder (DJV3) is built for secure, everyday access to fixed docks, piers, and seawalls. Constructed from anodized aluminum, it resists corrosion in both saltwater and freshwater environments, giving boat owners and dock users a durable, low-maintenance entry and exit point at the waterline. The ladder is intended for stationary dock and seawall applications rather than boat transoms, making it a practical choice for residential docks, marinas, and fixed piers.\u003c\/p\u003e\u003cp\u003eThree standard 2 inch wide steps are spaced 12 inches apart, each with a non-slip surface for stable, secure footing when climbing in or out of the water. The ladder measures 20 inches wide by 36 inches high, with a 14 inch handle depth that gives users a confident grip while reboarding. It is rated for a 750 pound weight capacity, supporting residential or light commercial use, and the anodized silver finish is designed to hold up to long-term outdoor and marine exposure.\u003c\/p\u003e\u003cp\u003eAt 20 pounds, the ladder is manageable to install on a stationary dock structure without specialized equipment. It is sold as a single 3-step unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JIF Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e DJV3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dock Ladder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Stationary docks, piers, and seawalls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Steps:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Width:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Spacing:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Capacity:\u003c\/strong\u003e 750 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 20 inches wide x 36 inches high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Depth:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Surface:\u003c\/strong\u003e Non-slip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the JIF Marine DJV3 dock ladder designed for?\u003c\/strong\u003e The DJV3 is a stationary dock ladder designed for fixed docks, piers, and seawalls, providing a secure entry and exit point from the water rather than mounting to a boat transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many steps does the DJV3 dock ladder have?\u003c\/strong\u003e It has 3 standard 2 inch wide steps, spaced 12 inches apart, each finished with a non-slip surface for secure footing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat weight capacity does the DJV3 support?\u003c\/strong\u003e The DJV3 is rated for a 750 pound weight capacity, making it suitable for residential or light commercial dock use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the JIF Marine DJV3 dock ladder made from?\u003c\/strong\u003e It is made from aluminum with an anodized finish, which resists corrosion in both saltwater and freshwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the DJV3 dock ladder?\u003c\/strong\u003e The DJV3 measures 20 inches wide by 36 inches high, with a 14 inch handle depth for a stable grip while climbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the DJV3 dock ladder weigh?\u003c\/strong\u003e The DJV3 weighs 20 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the DJV3 be mounted on a boat?\u003c\/strong\u003e No, the DJV3 is a stationary ladder built for fixed docks, piers, and seawalls, not for mounting on a boat hull or transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the DJV3 dock ladder require much maintenance?\u003c\/strong\u003e The anodized aluminum construction of the DJV3 is corrosion-resistant, so it requires minimal maintenance even with regular exposure to marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does the DJV3 come in?\u003c\/strong\u003e The DJV3 has a silver anodized aluminum finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the DJV3?\u003c\/strong\u003e The DJV3 is sold as a single complete 3-step dock ladder unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the steps on the DJV3 slippery when wet?\u003c\/strong\u003e No, each of the 3 steps on the DJV3 has a non-slip surface designed for secure footing when wet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the DJV3 suitable for a seawall installation?\u003c\/strong\u003e Yes, the DJV3 is specifically designed for use on stationary docks, piers, and seawall applications.\u003c\/p\u003e","brand":"JIF Marine","offers":[{"title":"Default Title","offer_id":49025244922075,"sku":"JIF-DJV3","price":279.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31z6Mm-hJKL.jpg?v=1785331079"},{"product_id":"jif-marine-5-step-stationary-dock-ladder-djv5-anodized-aluminum-750-lb-capacity","title":"JIF Marine 5-Step Stationary Dock Ladder DJV5, Anodized Aluminum, 750 lb Capacity","description":"\u003cp\u003eThe JIF Marine 5-Step Stationary Dock Ladder (DJV5) provides safe, stable water access for seawalls and fixed-height docks. Built from anodized aluminum, it resists rust and corrosion from both saltwater and freshwater exposure, making it a long-term fixture for waterfront properties. The ladder features 5 standard 2 inch wide non-slip steps spaced 12 inches apart vertically, giving swimmers and boaters sure footing as they climb out of the water. A wide 20 inch stance and 14 inch handle depth add stability and comfort during use, while the anti-slip step surface reduces the risk of a slip when steps are wet. Rated to support up to 750 pounds, the ladder is suited to families, groups, and daily dock traffic carrying gear. Standing 56 inches tall, it is designed for fixed docks and seawalls rather than boats with varying freeboard. The silver anodized finish matches typical aluminum dock hardware and requires no painting or additional coating for corrosion protection.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JIF Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e DJV5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dock Ladder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Steps:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Width:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Vertical Spacing:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Height:\u003c\/strong\u003e 56 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Depth:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 750 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 24 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 670541248300\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load capacity of the JIF Marine DJV5 dock ladder?\u003c\/strong\u003e The DJV5 dock ladder is rated to support up to 750 pounds, making it suitable for families, groups, and gear-heavy daily use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many steps does this dock ladder have?\u003c\/strong\u003e It has 5 standard 2 inch wide steps, spaced 12 inches apart vertically, on the JIF Marine DJV5 model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the DJV5 ladder meant for boats or docks?\u003c\/strong\u003e This is a stationary dock ladder designed for seawalls and fixed-height docks rather than boats, since it is not built to accommodate changing freeboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the JIF Marine DJV5 ladder made from?\u003c\/strong\u003e It is made from anodized aluminum, which resists rust and corrosion in both saltwater and freshwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow wide is the dock ladder?\u003c\/strong\u003e The DJV5 has a 20 inch width, giving a stable, comfortable stance for climbing in and out of the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow tall is the JIF Marine dock ladder?\u003c\/strong\u003e The ladder stands 56 inches in maximum height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ladder have a non-slip surface?\u003c\/strong\u003e Yes, the DJV5's 5 steps have a non-slip, anti-slip surface designed to reduce slipping when steps are wet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the handle depth on this ladder?\u003c\/strong\u003e The handle depth is 14 inches, which adds grip stability while boarding or exiting the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the DJV5 dock ladder weigh?\u003c\/strong\u003e The JIF Marine DJV5 dock ladder weighs 24 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does the ladder come in?\u003c\/strong\u003e It has a silver anodized aluminum finish, which does not require painting for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this ladder fixed or foldable?\u003c\/strong\u003e The DJV5 is a stationary dock ladder, built as a fixed installation rather than a folding or telescoping design.\u003c\/p\u003e","brand":"JIF Marine","offers":[{"title":"Default Title","offer_id":49025244954843,"sku":"JIF-DJV5","price":242.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31oFA_2TafL.jpg?v=1785331080"},{"product_id":"jif-marine-4-step-stationary-dock-ladder-anodized-aluminum-48-inch","title":"JIF Marine 4-Step Stationary Dock Ladder, Anodized Aluminum, 48 Inch","description":"\u003cp\u003eThe JIF Marine DJV4 is a 4-step stationary dock ladder built for permanent mounting at the edge of a dock. It is constructed of 6005-T5 anodized aluminum, which is rated 22% stronger than the standard 6063 marine-grade aluminum used on many competing ladders, giving it added corrosion resistance and a longer service life in wet, saltwater, or freshwater dock environments. The ladder uses a fully welded, 2-piece design with no gap welding on the steps or other structural parts, so there are no weak points where corrosion or stress cracks can start. The handles are bolt-on and removable for storage or shipping, while the steps are fully welded and assembled using 2,000 lb clear factor stainless steel bolts for a secure, long-lasting connection.\u003c\/p\u003e\u003cp\u003eThe ladder measures 48 inches from the top of the dock to the bottom step, with a ladder width of 20 inches, a handle depth of 14 inches, and a step depth of 2 inches. The 4 steps are spaced 12 inches apart, and mounting bolt holes are 1\/2 inch in diameter. The ladder is rated to hold up to 750 lbs, making it suitable for regular use by boaters and swimmers accessing the dock. This is a stationary, non-folding design intended for fixed dock installation rather than boat-mounted or telescoping applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JIF Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e DJV4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 4-Step Stationary Dock Ladder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Steps:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 6005-T5 Anodized Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height (top of dock to bottom of ladder):\u003c\/strong\u003e 48 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLadder Width:\u003c\/strong\u003e 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Depth:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Height (spacing between steps):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Depth:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Bolt Hole Diameter:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Capacity:\u003c\/strong\u003e 750 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Stationary\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e 2-piece, UPS shippable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Stainless steel bolts, 2000 lb clear factor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many steps does the JIF Marine DJV4 dock ladder have?\u003c\/strong\u003e The DJV4 has 4 steps, spaced 12 inches apart from each other.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the overall height of this dock ladder?\u003c\/strong\u003e From the top of the dock to the bottom step, the JIF Marine DJV4 measures 48 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the DJV4 dock ladder made from?\u003c\/strong\u003e It is made of 6005-T5 anodized aluminum, which is rated 22% stronger than the standard 6063 marine-grade aluminum used in many other dock ladders, giving it better corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can this ladder hold?\u003c\/strong\u003e The JIF Marine DJV4 has a weight capacity of 750 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this ladder foldable or stationary?\u003c\/strong\u003e The DJV4 is a stationary ladder, designed for fixed, permanent mounting at the dock edge rather than folding or retracting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow wide is the ladder and how deep are the handles and steps?\u003c\/strong\u003e The DJV4 has a ladder width of 20 inches, a handle depth of 14 inches, and a step depth of 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the mounting bolt holes?\u003c\/strong\u003e The mounting bolt holes on the JIF Marine DJV4 are 1\/2 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the dock ladder weigh?\u003c\/strong\u003e The JIF Marine DJV4 weighs 22 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the handles removable?\u003c\/strong\u003e Yes, the handles on the DJV4 are bolt-on and removable, while the steps are fully welded and assembled with 2,000 lb clear factor stainless steel bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ladder have any welded gaps that could weaken it?\u003c\/strong\u003e No. The DJV4 uses a fully welded, 2-piece design with no gap welding on the steps or other parts, reducing points where corrosion or cracking could start.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the DJV4 be shipped assembled?\u003c\/strong\u003e The ladder ships as a 2-piece, UPS shippable design, built for easy transport while remaining a fully welded, strong structure once installed.\u003c\/p\u003e","brand":"JIF Marine","offers":[{"title":"Default Title","offer_id":49025244987611,"sku":"JIF-DJV4","price":316.08,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61DHcQ7IYmL.jpg?v=1785331081"},{"product_id":"jif-marine-4-step-stationary-dock-ladder-wide-4-inch-non-slip-steps-anodized-aluminum-750-lb-capacity-djv4-w","title":"JIF Marine 4-Step Stationary Dock Ladder, Wide 4 Inch Non-Slip Steps, Anodized Aluminum, 750 lb Capacity (DJV4-W)","description":"\u003cp\u003eThe JIF Marine 4-Step Stationary Dock Ladder (DJV4-W) is a permanent-mount ladder built to provide stable, repeatable access to the water from fixed docks, seawalls, piers and other stationary waterfront platforms. Because it mounts directly to the dock or seawall, it stays in place as a dedicated access point, whether for swimming, working around the dock, or launching small craft.\u003c\/p\u003e\u003cp\u003eThe ladder is constructed from anodized aluminum, combining corrosion resistance with a lighter overall weight for easier handling during installation while standing up to long-term marine exposure. It features four steps with extra-wide 4 inch treads and a non-slip surface, giving swimmers and guests more foot room and traction when boarding from the water or stepping down from the dock. The four steps are spaced approximately 12 inches apart, creating a comfortable, consistent climbing angle, and the ladder has a 14 inch handle depth to provide a secure handhold while stepping on or off the dock.\u003c\/p\u003e\u003cp\u003eWith an overall width of 20 inches and a rated load capacity of 750 pounds when properly installed, this stationary dock ladder is suitable for frequent use by family, guests, and crew in busy waterfront areas. It is a straightforward upgrade for dock owners looking to add a dedicated, permanent water access point.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JIF Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e DJV4-W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Stationary Dock Ladder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Anodized Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Steps:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Width:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Spacing:\u003c\/strong\u003e Approximately 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Width:\u003c\/strong\u003e 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height:\u003c\/strong\u003e 48 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Depth:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 750 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 24 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Non-slip steps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Stationary\/fixed mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Fixed docks, seawalls, and piers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the JIF Marine DJV4-W dock ladder designed for?\u003c\/strong\u003e The DJV4-W is a stationary dock ladder designed for permanent mounting on fixed docks, seawalls, and piers, giving swimmers and guests a dependable, always-ready way to enter and exit the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many steps does the DJV4-W ladder have and how wide are they?\u003c\/strong\u003e The DJV4-W has 4 steps, each with an extra-wide 4 inch non-slip tread, spaced approximately 12 inches apart for a comfortable climbing angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the JIF Marine DJV4-W ladder made from?\u003c\/strong\u003e This dock ladder is made from anodized aluminum, a corrosion-resistant material that keeps the ladder lightweight to install while holding up to long-term exposure at the waterfront.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can the DJV4-W dock ladder hold?\u003c\/strong\u003e When properly mounted, the DJV4-W is rated for a load capacity of 750 pounds, making it suitable for frequent use by multiple people in busy dock areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the DJV4-W ladder?\u003c\/strong\u003e The JIF Marine DJV4-W measures 20 inches in overall width and 48 inches in overall height, with a 14 inch handle depth for a secure grip when boarding or exiting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the DJV4-W dock ladder weigh?\u003c\/strong\u003e The DJV4-W weighs 24 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the DJV4-W be used on a floating dock?\u003c\/strong\u003e The DJV4-W is built as a stationary ladder for fixed docks, seawalls, and piers rather than floating docks, since it is designed to mount permanently to a stable structure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the DJV4-W have non-slip steps?\u003c\/strong\u003e Yes, each of the 4 steps on the DJV4-W has a non-slip surface across its 4 inch width to help reduce slipping when users are wet or barefoot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the JIF Marine DJV4-W have?\u003c\/strong\u003e The DJV4-W features an anodized aluminum finish in silver, which provides corrosion resistance for ongoing exposure to water and weather.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the DJV4-W suitable for frequent, high-traffic use?\u003c\/strong\u003e Yes, with its 750 pound load capacity and robust anodized aluminum construction, the DJV4-W is built for frequent use by family, guests, and crew in busy waterfront areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the DJV4-W ladder include handles for boarding?\u003c\/strong\u003e Yes, the DJV4-W has a 14 inch handle depth built into the design, giving users a solid grip when stepping onto or off the dock.\u003c\/p\u003e","brand":"JIF Marine","offers":[{"title":"Default Title","offer_id":49025245020379,"sku":"JIF-DJV4-W","price":518.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61KFhtUkhTL.jpg?v=1785331080"},{"product_id":"jif-marine-djv5-w-5-step-stationary-dock-ladder-with-wide-steps","title":"JIF Marine DJV5-W 5-Step Stationary Dock Ladder with Wide Steps","description":"\u003cp\u003eThe JIF Marine DJV5-W is a 5-step stationary dock ladder built with a wide step design for a more stable, comfortable foothold when boarding or exiting the water at a fixed dock. As a stationary ladder, it is a fixed, non-folding unit intended for permanent installation rather than a retractable or telescoping design. Each of its five steps uses the wider tread profile referenced in its name, distinguishing it from standard narrow-step dock ladders. The DJV5-W weighs 26 pounds, giving it a solid, stable footprint for dock use. It falls under JIF Marine's Dock Ladders category, and its UPC is 670541248348 for easy identification when ordering or verifying stock.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JIF Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e DJV5-W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 5-Step Stationary Dock Ladder - Wide Step\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Steps:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLadder Type:\u003c\/strong\u003e Stationary\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Design:\u003c\/strong\u003e Wide step\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 26 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 670541248348\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Dock Ladders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many steps does the JIF Marine DJV5-W dock ladder have?\u003c\/strong\u003e The DJV5-W is a 5-step dock ladder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a stationary or a folding dock ladder?\u003c\/strong\u003e The JIF Marine DJV5-W is a stationary dock ladder, meaning it is a fixed, non-folding unit rather than a retractable or telescoping design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the wide step design mean on the DJV5-W?\u003c\/strong\u003e Wide step refers to the DJV5-W's tread design, which uses wider steps than a standard-step dock ladder, as reflected in its product name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the JIF Marine DJV5-W ladder weigh?\u003c\/strong\u003e The DJV5-W dock ladder weighs 26 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for this dock ladder?\u003c\/strong\u003e The manufacturer part number is DJV5-W, made by JIF Marine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the DJV5-W dock ladder?\u003c\/strong\u003e The DJV5-W is made by JIF Marine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is the DJV5-W?\u003c\/strong\u003e The DJV5-W is listed in the Dock Ladders category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the JIF Marine DJV5-W?\u003c\/strong\u003e The UPC for the JIF Marine DJV5-W dock ladder is 670541248348.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the DJV5-W designed for permanent dock installation?\u003c\/strong\u003e As a stationary ladder, the JIF Marine DJV5-W is designed to be fixed in place at a dock rather than removed or folded away.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the DJV5-W different from a folding dock ladder?\u003c\/strong\u003e Unlike a folding ladder, the JIF Marine DJV5-W is stationary, staying fixed in its mounted position rather than retracting or hinging out of use.\u003c\/p\u003e","brand":"JIF Marine","offers":[{"title":"Default Title","offer_id":49025245085915,"sku":"JIF-DJV5-W","price":370.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_e5ca5aa5-32f1-4f9a-811c-cd7ec8ce9697.png?v=1785351600"},{"product_id":"jif-marine-djw5-w-5-step-flip-up-aluminum-dock-ladder-with-extra-wide-4-inch-steps-750-pound-capacity","title":"JIF Marine DJW5-W 5-Step Flip-Up Aluminum Dock Ladder with Extra-Wide 4 Inch Steps, 750 Pound Capacity","description":"\u003cp\u003eThe JIF Marine DJW5-W is a 5-step hinged flip-up dock ladder built from aluminum for long-term exposure to fresh and salt water. The ladder is designed to fold up above the waterline when not in use, keeping steps clear of marine growth and reducing the risk of impact damage from boats docking nearby. A quick-release safety pin locks the ladder in the down position for secure, stable use when boarding or exiting the water, and releases quickly to fold the ladder back up out of the way.\u003c\/p\u003e\u003cp\u003eEach of the 5 steps is extra-wide at 4 inches, giving users a larger, more stable footing surface than narrow-rung alternatives, which is particularly useful for swimmers, waders, and anyone boarding a dock or platform repeatedly. The ladder carries a 750 pound load capacity and finishes in a silver aluminum tone that resists corrosion better than uncoated steel hardware. Overall dimensions are 20 inches wide by 60 inches high, sized for permanent mounting at a dock, seawall, or swim platform.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JIF Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e DJW5-W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flip Up Dock Ladder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Steps:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Width:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 20 inches wide x 60 inches high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Height:\u003c\/strong\u003e 60 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 26 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 750 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Extendable, flip-up hinged design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Quick-release safety pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many steps does the JIF Marine DJW5-W dock ladder have?\u003c\/strong\u003e The DJW5-W has 5 steps, each an extra-wide 4 inches, giving a stable, roomy footing surface for boarding from the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight capacity of this dock ladder?\u003c\/strong\u003e This JIF Marine dock ladder is rated for a 750 pound load capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the DJW5-W dock ladder made from?\u003c\/strong\u003e It is constructed from aluminum, finished in silver, for resistance to corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the flip-up feature work on this ladder?\u003c\/strong\u003e The DJW5-W uses a hinged flip-up design that lets the ladder fold up and out of the water when not in use, then swing back down for boarding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the JIF Marine DJW5-W ladder locked in the down position?\u003c\/strong\u003e A quick-release safety pin locks the DJW5-W in the down position for secure use, and releases quickly when you want to fold the ladder back up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the DJW5-W dock ladder?\u003c\/strong\u003e The DJW5-W measures 20 inches wide by 60 inches high overall, with a maximum height of 60 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the DJW5-W dock ladder weigh?\u003c\/strong\u003e This dock ladder weighs 26 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the DJW5-W suitable for permanent dock installation?\u003c\/strong\u003e Yes, the JIF Marine DJW5-W is designed as a mounted dock ladder that flips up above the waterline between uses, making it suitable for permanent installation at a dock, seawall, or swim platform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the DJW5-W ladder?\u003c\/strong\u003e The DJW5-W ships as a single complete 5-step ladder unit, unit count 1, ready for mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the steps on this ladder wider than standard dock ladders?\u003c\/strong\u003e Yes, the DJW5-W features extra-wide 4 inch steps, wider than the narrow rungs found on many standard boat and dock ladders.\u003c\/p\u003e","brand":"JIF Marine","offers":[{"title":"Default Title","offer_id":49025245053147,"sku":"JIF-DJW5-W","price":471.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31gsL2je8-L.jpg?v=1785331081"},{"product_id":"jif-marine-djx4-4-step-retractable-sliding-dock-ladder-aluminum-750-lb-capacity","title":"JIF Marine DJX4 4-Step Retractable Sliding Dock Ladder, Aluminum, 750 lb Capacity","description":"\u003cp\u003eThe JIF Marine DJX4 is a 4-step retractable sliding dock lift ladder built for deep-water dock access. Its lift-up design lets the ladder slide up above the waterline when not in use, keeping it clean, dry, and free of algae buildup while reducing corrosion and extending its service life. The frame is constructed from anodized aluminum, giving it a rust-resistant, lightweight build suited to both saltwater and freshwater environments.\u003c\/p\u003e\u003cp\u003eThe DJX4 features four standard 2 inch wide non-slip steps spaced 12 inches apart, providing secure footing and a comfortable climbing rhythm from the water to the dock. A double ring locking system holds the ladder firmly in the extended position during use, preventing it from sliding or retracting unexpectedly while someone is climbing. The ladder measures 48 inches tall and 20 inches wide, with a 14 inch handle depth for a confident grip when boarding.\u003c\/p\u003e\u003cp\u003eRated for a load capacity of 750 pounds, the DJX4 is built to handle repeated use by swimmers and boaters. Its silver anodized finish resists corrosion in marine environments, and the retractable design makes it a practical, space-saving addition to any residential or commercial dock setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JIF Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e DJX4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dock Lift Ladder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Retractable, lift-up sliding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Steps:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Width:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Spacing:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking System:\u003c\/strong\u003e Double ring lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 48 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Depth:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 750 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 670541248461\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load capacity of the JIF Marine DJX4 dock ladder?\u003c\/strong\u003e The DJX4 is rated to support up to 750 pounds, making it suitable for repeated use by multiple swimmers or boaters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many steps does the DJX4 have?\u003c\/strong\u003e It has four standard 2 inch wide non-slip steps, spaced 12 inches apart for a comfortable, secure climb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the DJX4 dock ladder made from?\u003c\/strong\u003e It is built from anodized aluminum, which resists rust and corrosion in both saltwater and freshwater conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ladder retract out of the water when not in use?\u003c\/strong\u003e Yes, the DJX4 uses a lift-up retractable design that slides up above the waterline, helping keep the steps clean, dry, and free of algae buildup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the ladder stay locked in place while in use?\u003c\/strong\u003e A double ring locking system holds the DJX4 securely in the extended position during use, preventing it from sliding back unexpectedly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the DJX4?\u003c\/strong\u003e The JIF Marine DJX4 measures 48 inches tall and 20 inches wide, with a 14 inch handle depth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the DJX4 dock ladder weigh?\u003c\/strong\u003e The DJX4 weighs 22 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does the DJX4 come in?\u003c\/strong\u003e It has a silver anodized aluminum finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the DJX4 suitable for saltwater use?\u003c\/strong\u003e Yes, the anodized aluminum construction of the DJX4 is rust-resistant and designed for both saltwater and freshwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow wide are the steps on the DJX4?\u003c\/strong\u003e Each step is a standard 2 inches wide, sized for secure footing when climbing from the water to the dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the DJX4 dock ladder?\u003c\/strong\u003e The DJX4 is a complete 4-step retractable sliding dock lift ladder unit, ready to mount to a dock.\u003c\/p\u003e","brand":"JIF Marine","offers":[{"title":"Default Title","offer_id":49025245151451,"sku":"JIF-DJX4","price":284.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31stOMEZVxL.jpg?v=1785331080"},{"product_id":"jif-marine-djx3-w-3-step-retractable-dock-ladder-4-inch-wide-steps-750-lb-capacity","title":"JIF Marine DJX3-W 3-Step Retractable Dock Ladder, 4 Inch Wide Steps, 750 lb Capacity","description":"\u003cp\u003eThe JIF Marine DJX3-W is a 3-step retractable sliding dock ladder built for safe, stable access to the water from a dock. Its lift-up design allows the ladder to be raised above the waterline when not in use, helping to prevent algae buildup and corrosion so the ladder lasts longer. The ladder is constructed from corrosion-resistant anodized aluminum in a silver finish, and a double ring locking mechanism holds it securely in place once it is extended for use.\u003c\/p\u003e\u003cp\u003eThe DJX3-W features extra-wide 4 inch steps that provide a more comfortable, stable foothold than a standard 2 inch step, making entry and exit easier for users of all ages. With a heavy-duty 750 pound load capacity, this ladder is suited to both residential and commercial dock applications. Overall product dimensions are 20 inches wide by 36 inches high, with a maximum extended height of 36 inches. The retractable, extendable design lets the ladder slide up and lock into a stowed position when the dock is not in use, and slide down and lock for boarding.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JIF Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e DJX3-W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Anodized Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Steps:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Width:\u003c\/strong\u003e 4 inches (wide step)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 750 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 20 inches W x 36 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Height:\u003c\/strong\u003e 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Double ring lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Retractable, lift-up, sliding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 670541248492\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load capacity of the JIF Marine DJX3-W dock ladder?\u003c\/strong\u003e The DJX3-W is rated for a 750 pound load capacity, making it suitable for both residential and commercial dock use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many steps does the DJX3-W have and how wide are they?\u003c\/strong\u003e This ladder has 3 steps, each an extra-wide 4 inches, which gives a more stable and comfortable foothold than a standard 2 inch step.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the JIF Marine DJX3-W made from?\u003c\/strong\u003e It is made from anodized aluminum, which resists corrosion from freshwater and saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this ladder retract when not in use?\u003c\/strong\u003e Yes, the DJX3-W has a retractable, lift-up sliding design that raises the ladder above the waterline when it is not in use, which helps prevent algae buildup and corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the ladder held in place when extended or stowed?\u003c\/strong\u003e A double ring locking mechanism secures the DJX3-W in both the extended (boarding) position and the raised, stowed position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the DJX3-W dock ladder?\u003c\/strong\u003e The JIF Marine DJX3-W measures 20 inches wide by 36 inches high, with a maximum extended height of 36 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the DJX3-W dock ladder weigh?\u003c\/strong\u003e The DJX3-W weighs 22 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does this ladder come in?\u003c\/strong\u003e The DJX3-W has a silver finish, consistent with its anodized aluminum construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the DJX3-W suitable for a commercial dock, or just residential use?\u003c\/strong\u003e Its 750 pound capacity and corrosion-resistant anodized aluminum construction make the JIF Marine DJX3-W suited to both residential and commercial dock applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the DJX3-W?\u003c\/strong\u003e The DJX3-W ships as a complete 3-step retractable sliding dock ladder unit, ready to mount to a dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the DJX3-W and a standard-step version?\u003c\/strong\u003e The DJX3-W uses extra-wide 4 inch steps, compared to a standard 2 inch step width on other JIF Marine ladder variants, for added comfort and stability when climbing.\u003c\/p\u003e","brand":"JIF Marine","offers":[{"title":"Default Title","offer_id":49025245216987,"sku":"JIF-DJX3-W","price":383.58,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41PIlRt3NBL.jpg?v=1785331081"},{"product_id":"jif-marine-djx4-w-4-step-retractable-sliding-dock-lift-ladder-750-lb-capacity-aluminum","title":"JIF Marine DJX4-W 4-Step Retractable Sliding Dock Lift Ladder, 750 lb Capacity, Aluminum","description":"\u003cp\u003eThe JIF Marine DJX4-W is a 4-step retractable sliding dock lift ladder built from anodized aluminum for use in saltwater or freshwater marine environments. Its lift-up, retractable design allows the ladder to slide above the waterline when not in use, which helps reduce algae and marine growth on the steps and extends the life of the ladder. The ladder features four extra-wide 4 inch non-slip steps spaced 12 inches apart, giving swimmers and boarders comfortable, stable footing when climbing from the water onto the dock. A double ring locking mechanism holds the ladder firmly in the extended position during use, then releases to allow it to retract for storage. The DJX4-W supports a load capacity of 750 pounds, making it suitable for users of varying sizes, and measures 48 inches tall by 20 inches wide for a stable, wide point of access. This ladder is designed for both residential and commercial dock installations that need a durable, low-maintenance boarding solution. The rust-resistant aluminum frame keeps the ladder lightweight while standing up to harsh marine conditions over repeated use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JIF Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e DJX4-W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 20 inches wide x 48 inches tall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Steps:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Width:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Spacing:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 750 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Double ring lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Retractable, extendable, lift-up storage design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 24 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load capacity of the JIF Marine DJX4-W dock ladder?\u003c\/strong\u003e The DJX4-W supports up to 750 pounds, making it suitable for boarders of varying sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many steps does this dock ladder have?\u003c\/strong\u003e The JIF Marine DJX4-W has 4 steps, each 4 inches wide and spaced 12 inches apart for comfortable, stable footing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the DJX4-W ladder made from?\u003c\/strong\u003e It is constructed from anodized aluminum, giving it a rust-resistant, lightweight frame suited to saltwater and freshwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ladder retract when not in use?\u003c\/strong\u003e Yes, the DJX4-W uses a lift-up, retractable sliding design that allows the ladder to slide above the waterline when not in use, which helps reduce algae buildup on the steps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the locking mechanism work?\u003c\/strong\u003e A double ring locking mechanism holds the DJX4-W firmly in place while extended, providing a stable, secure ladder for boarding, and releases so the ladder can slide back into its storage position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this dock ladder?\u003c\/strong\u003e The JIF Marine DJX4-W measures 48 inches tall and 20 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the DJX4-W dock ladder weigh?\u003c\/strong\u003e The DJX4-W weighs 24 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this ladder meant for residential or commercial docks?\u003c\/strong\u003e The DJX4-W is built for both residential and commercial dock installations that need a durable boarding ladder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the DJX4-W ladder?\u003c\/strong\u003e It has a silver finish, consistent with its anodized aluminum construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are the steps wider than a standard dock ladder?\u003c\/strong\u003e The DJX4-W uses extra-wide 4 inch steps to offer more stable, comfortable footing during boarding compared to narrower ladder steps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this ladder handle saltwater conditions?\u003c\/strong\u003e Yes, the anodized aluminum construction of the DJX4-W is rust-resistant and built to withstand harsh saltwater or freshwater conditions.\u003c\/p\u003e","brand":"JIF Marine","offers":[{"title":"Default Title","offer_id":49025245118683,"sku":"JIF-DJX4-W","price":505.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31yBUI4XHEL.jpg?v=1785331081"},{"product_id":"jif-marine-djw4-w-hinged-flip-up-dock-ladder-4-step-aluminum-750-lb-capacity","title":"JIF Marine DJW4-W Hinged Flip-Up Dock Ladder, 4-Step Aluminum, 750 lb Capacity","description":"\u003cp\u003eThe JIF Marine DJW4-W is a 4-step hinged flip-up dock ladder built for safe, repeated water entry and exit at residential or commercial docks. Its hinged, lift-up design allows the ladder to flip up and out of the water when not in use, which reduces algae and marine growth on the steps and extends the ladder's usable life. The frame is constructed of marine-grade anodized aluminum, giving it corrosion resistance for both saltwater and freshwater environments.\u003c\/p\u003e\u003cp\u003eEach of the four steps is an extra-wide, non-slip 4 inch step, spaced 12 inches apart, providing stable, comfortable footing while climbing. A quick-release safety pin locks the ladder securely in the down position during use; removing the pin lets the ladder fold up quickly when finished. The ladder stands 48 inches tall with a 20 inch handle height for a secure hold while boarding, and the overall footprint is 20 inches wide by 48 inches tall. It is rated to support up to 750 pounds, making it suitable for multiple users or heavier loads.\u003c\/p\u003e\u003cp\u003eFinished in silver, the DJW4-W is a straightforward, durable upgrade for any dock that needs a dependable, low-maintenance boarding ladder.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JIF Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e DJW4-W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flip-Up Dock Ladder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Steps:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Width:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Spacing:\u003c\/strong\u003e 12 inches apart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 20 inches wide x 48 inches tall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Height:\u003c\/strong\u003e 48 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Height:\u003c\/strong\u003e 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 750 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\/Color:\u003c\/strong\u003e Silver, anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 24 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Quick-release safety pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Hinged, flip-up\/lift-up\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many steps does the JIF Marine DJW4-W dock ladder have?\u003c\/strong\u003e The DJW4-W has 4 steps, each an extra-wide 4 inch non-slip step spaced 12 inches apart for stable footing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight capacity of this dock ladder?\u003c\/strong\u003e The JIF Marine DJW4-W is rated to support up to 750 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the DJW4-W ladder made from?\u003c\/strong\u003e It is constructed from marine-grade anodized aluminum, which resists corrosion in both saltwater and freshwater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the ladder be lifted out of the water when not in use?\u003c\/strong\u003e Yes, the DJW4-W uses a hinged flip-up design so the ladder can be lifted out of the water, reducing algae buildup and extending its life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the ladder stay locked in place while someone is climbing?\u003c\/strong\u003e A quick-release safety pin locks the DJW4-W in the down position during use; removing the pin allows it to fold up when finished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the DJW4-W?\u003c\/strong\u003e The ladder measures 20 inches wide by 48 inches tall, with a 48 inch maximum height and a 20 inch handle height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the JIF Marine DJW4-W weigh?\u003c\/strong\u003e The DJW4-W weighs 24 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the dock ladder?\u003c\/strong\u003e The JIF Marine DJW4-W has a silver, anodized finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this ladder suitable for saltwater use?\u003c\/strong\u003e Yes, the anodized aluminum frame of the DJW4-W is rust-resistant and built for both saltwater and freshwater conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the DJW4-W suitable for commercial docks?\u003c\/strong\u003e Its 750 pound load capacity and durable aluminum construction make the DJW4-W suitable for both residential and commercial dock use.\u003c\/p\u003e","brand":"JIF Marine","offers":[{"title":"Default Title","offer_id":49025245184219,"sku":"JIF-DJW4-W","price":636.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61sXnwc4IuL.jpg?v=1785331080"},{"product_id":"jif-marine-djx5-5-step-retractable-sliding-dock-ladder-aluminum-60-inch-750-pound-capacity","title":"JIF Marine DJX5 5-Step Retractable Sliding Dock Ladder, Aluminum, 60 Inch, 750 Pound Capacity","description":"\u003cp\u003eThe JIF Marine DJX5 is a 5-step retractable sliding dock lift ladder built for deep-water docks and marine environments where extended reach and reliable footing matter. Standing 60 inches tall, it gives boaters and dock owners greater vertical reach than shorter ladders, making it a strong fit for taller docks or locations with fluctuating water levels. The lift-up design allows the ladder to retract above the waterline when not in use, helping protect it from constant water exposure and extending its service life.\u003c\/p\u003e\u003cp\u003eEach of the five steps is 2 inches wide with a textured, non-slip surface for secure footing, and the steps are spaced 12 inches apart for a comfortable, consistent climb. A double ring locking system holds the ladder firmly in place during use, adding a layer of safety while boarding or exiting the water. The frame is built from anodized aluminum, which resists corrosion in saltwater and freshwater marine settings while keeping the ladder lightweight enough for routine sliding and retracting. The ladder measures 20 inches wide with a 14 inch handle depth and supports up to 750 pounds, making it suitable for both residential and commercial dock installations.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JIF Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e DJX5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dock Lift Ladder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Steps:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Width:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Spacing:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height:\u003c\/strong\u003e 60 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Width:\u003c\/strong\u003e 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Depth:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 28.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 750 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Double ring lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Extendable, retractable lift-up design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 670541248478\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many steps does the JIF Marine DJX5 dock ladder have?\u003c\/strong\u003e The DJX5 has 5 steps, each 2 inches wide with a non-slip textured surface, spaced 12 inches apart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight capacity of this dock ladder?\u003c\/strong\u003e The JIF Marine DJX5 supports up to 750 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow tall is the DJX5 dock ladder?\u003c\/strong\u003e It measures 60 inches in overall height, giving extra reach for taller docks or docks with fluctuating water levels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the JIF Marine DJX5 made from?\u003c\/strong\u003e The DJX5 is constructed from anodized aluminum, which resists corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ladder retract when not in use?\u003c\/strong\u003e Yes, the DJX5 uses a lift-up, retractable sliding design that allows it to be raised above the waterline when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the locking system work on this ladder?\u003c\/strong\u003e A double ring locking system secures the DJX5 in place while it is deployed, keeping it stable during use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the DJX5?\u003c\/strong\u003e The JIF Marine DJX5 is 20 inches wide by 60 inches high, with a handle depth of 14 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the DJX5 dock ladder weigh?\u003c\/strong\u003e The DJX5 weighs 28.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this ladder suitable for commercial docks?\u003c\/strong\u003e Yes, with its 750 pound capacity and corrosion-resistant aluminum construction, the JIF Marine DJX5 is suitable for both residential and commercial dock installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the JIF Marine DJX5?\u003c\/strong\u003e The DJX5 has a silver finish, consistent with its anodized aluminum construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the steps slip-resistant?\u003c\/strong\u003e Yes, each of the 5 steps on the DJX5 is 2 inches wide with a textured, non-slip surface for secure footing.\u003c\/p\u003e","brand":"JIF Marine","offers":[{"title":"Default Title","offer_id":49025245249755,"sku":"JIF-DJX5","price":438.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31stOMEZVxL_74744b72-ea53-49ef-b2e2-865fa4044620.jpg?v=1785331081"},{"product_id":"jif-marine-djx5-w-5-step-retractable-sliding-dock-ladder-60-inch-aluminum-4-inch-wide-steps-750-lb-capacity","title":"JIF Marine DJX5-W 5-Step Retractable Sliding Dock Ladder, 60 Inch Aluminum, 4 Inch Wide Steps, 750 lb Capacity","description":"\u003cp\u003eThe JIF Marine DJX5-W is a 5-step retractable sliding dock ladder built for docks and waterfronts where deeper water or a lower platform calls for extra reach. At a full 60 inch height, it offers five extra-wide 4 inch non-slip steps spaced 12 inches apart, giving climbers a stable, comfortable path in and out of the water. The retractable lift-up design lets the ladder slide up above the waterline when not in use, which reduces algae buildup on the steps and cuts down on wear from constant water contact.\u003c\/p\u003e\u003cp\u003eConstruction is anodized aluminum, chosen for its resistance to corrosion in saltwater and freshwater marine environments alike. A double ring locking system holds the ladder securely in the extended position during use, adding stability and safety while climbing. The ladder is rated for a 750 pound load capacity, making it suitable for a range of users. Overall product dimensions are 20 inches wide by 60 inches high, and the finish is silver aluminum. This is the wide-step version of the ladder, featuring 4 inch steps for a broader, more stable foothold than narrower-step designs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JIF Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e DJX5-W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dock Lift Ladder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Retractable, sliding, lift-up\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Steps:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Width:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Spacing:\u003c\/strong\u003e 12 inches apart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Height:\u003c\/strong\u003e 60 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 20 inches W x 60 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 750 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking System:\u003c\/strong\u003e Double ring locking system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 26 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 670541248515\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many steps does the JIF Marine DJX5-W have and how tall is it?\u003c\/strong\u003e The DJX5-W has 5 steps and stands 60 inches tall, giving it the longest reach in its ladder series for deeper water or lower dock platforms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow wide are the steps on this ladder?\u003c\/strong\u003e Each of the 5 steps on the DJX5-W is 4 inches wide, and the steps are spaced 12 inches apart for a stable, comfortable climb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight capacity of the DJX5-W dock ladder?\u003c\/strong\u003e 750 pounds is the rated load capacity of the JIF Marine DJX5-W, supporting a range of users.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the ladder made of?\u003c\/strong\u003e Anodized aluminum construction gives the DJX5-W corrosion resistance for saltwater and freshwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ladder retract when not in use?\u003c\/strong\u003e Yes, the DJX5-W uses a retractable lift-up design that slides up above the waterline when not needed, which reduces algae buildup and wear on the steps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the ladder stay locked in place while someone is climbing?\u003c\/strong\u003e A double ring locking system secures the DJX5-W in the extended position during use for added safety and stability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the DJX5-W?\u003c\/strong\u003e The JIF Marine DJX5-W measures 20 inches wide by 60 inches high overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this dock ladder weigh?\u003c\/strong\u003e The DJX5-W weighs 26 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the DJX5-W ladder?\u003c\/strong\u003e Silver is the finish on the anodized aluminum DJX5-W ladder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes this different from other ladders in the JIF Marine series?\u003c\/strong\u003e The DJX5-W is the wide-step version, with 4 inch steps for a broader foothold, and its 60 inch, 5-step design gives it the longest reach in the series for deeper water access.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the DJX5-W suitable for a high-traffic dock?\u003c\/strong\u003e Yes, the anodized aluminum construction and 750 pound capacity of the DJX5-W are built for frequent, heavy use on busy waterfronts.\u003c\/p\u003e","brand":"JIF Marine","offers":[{"title":"Default Title","offer_id":49025245282523,"sku":"JIF-DJX5-W","price":386.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51F7kC-PLFL.jpg?v=1785331082"},{"product_id":"jif-marine-dub2-telescoping-boat-hook-40-91-inch-adjustable-ribbed-aluminum-pole","title":"JIF Marine DUB2 Telescoping Boat Hook, 40-91 Inch Adjustable Ribbed Aluminum Pole","description":"\u003cp\u003eThe JIF Marine DUB2 is a telescoping boat hook built to extend your reach for docking, retrieving gear, or fending off a dock or piling without scratching your boat's finish. The pole retracts to 40 inches for easy storage and extends to a full 91 inches when you need extra reach, making it adjustable to the task at hand. The shaft is made from ribbed aluminum, a design that adds rigidity and strength along its length so the pole resists bending under load while staying lightweight enough to handle with one hand. At the working end is a high-impact molded hook, shaped to snag lines, fenders, or cleats securely. The hook's molded construction is designed specifically so it will not mar your boat's gelcoat or hull surfaces during use. The DUB2 also floats, so if it goes overboard it stays on the surface instead of sinking, giving you a chance to recover it. This is a universal boating accessory suited to a wide range of boats and does not require matching to a specific engine or hull model. It is a practical addition to any onboard tool kit for routine docking and retrieval tasks.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JIF Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e DUB2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Telescoping Boat Hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetracted Length:\u003c\/strong\u003e 40 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Length:\u003c\/strong\u003e 91 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 0.9 x 91 x 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Material:\u003c\/strong\u003e Ribbed aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook Material:\u003c\/strong\u003e High-impact molded plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multicoloured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuoyancy:\u003c\/strong\u003e Floats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 083351809485\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the JIF Marine DUB2 boat hook?\u003c\/strong\u003e The DUB2 retracts to 40 inches for storage and telescopes out to 91 inches when fully extended, giving you a wide adjustable reach range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the shaft made of?\u003c\/strong\u003e The shaft on the DUB2 is ribbed aluminum, a construction that adds strength and rigidity along its length while keeping the pole lightweight to handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the hook scratch or mar my boat's finish?\u003c\/strong\u003e No. The DUB2's hook is a high-impact molded piece specifically designed so it will not mar the boat's gelcoat or hull surfaces during normal use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this boat hook float if dropped in the water?\u003c\/strong\u003e Yes, the JIF Marine DUB2 is designed to float, so if it goes overboard it stays on the surface instead of sinking to the bottom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the DUB2 boat hook weigh?\u003c\/strong\u003e The DUB2 weighs 2.15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this boat hook a fixed length or adjustable?\u003c\/strong\u003e It is adjustable. The telescoping design of the DUB2 lets you extend it anywhere between its 40 inch retracted length and 91 inch fully extended length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the JIF Marine DUB2 suited for?\u003c\/strong\u003e The DUB2 is a universal boating accessory not tied to a specific hull, engine, or model, so it suits a wide range of boats needing a general-purpose docking and retrieval hook.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tasks is this boat hook used for?\u003c\/strong\u003e The DUB2 is used for docking assistance, fending off a dock or piling, and retrieving lines, fenders, or gear that are out of arm's reach.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the DUB2 boat hook?\u003c\/strong\u003e The JIF Marine DUB2 is finished in a multicoloured design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the DUB2 when packaged?\u003c\/strong\u003e The item dimensions for the DUB2 are 0.9 x 91 x 2.5 inches (length by width by height) at full extension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the hook part removable or replaceable?\u003c\/strong\u003e The dossier does not specify the hook as a separately replaceable component; the DUB2 is supplied as a complete telescoping pole with the molded hook attached.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the JIF Marine DUB2 come with any accessories?\u003c\/strong\u003e Based on available product information, the DUB2 ships as the telescoping pole with its molded hook end; no additional accessories are listed.\u003c\/p\u003e","brand":"JIF Marine","offers":[{"title":"Default Title","offer_id":49025245937883,"sku":"JIF-DUB-2","price":34.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__43475.1755271002.500.750.jpg?v=1785164410"},{"product_id":"jif-marine-ewi4-4-step-retractable-floating-dock-lift-ladder-anodized-aluminum","title":"JIF Marine EWI4 4-Step Retractable Floating Dock Lift Ladder, Anodized Aluminum","description":"\u003cp\u003eThe JIF Marine EWI4 is a 4-step floating dock lift ladder built for boaters and dock owners who need a swim or boarding ladder that stays clear of the water when not in use. The ladder retracts and slides up above the waterline, keeping the steps out of the water to reduce marine growth, corrosion, and ice damage during periods of non-use. When needed, it lowers into place and is held in the extended position by a double ring locking mechanism that keeps the ladder stable and secure for climbers entering or exiting the water.\u003c\/p\u003e\u003cp\u003eConstructed from anodized aluminum, the EWI4 resists corrosion in fresh and saltwater environments while keeping the ladder lightweight for easy handling and mounting on a floating dock. It features 4 steps, each 2 inches wide, providing a standard step surface for stable footing. The ladder measures 7.1 inches in length, 20 inches in width, and 48.8 inches in height, with a maximum height of 48.8 inches when fully extended.\u003c\/p\u003e\u003cp\u003eThis ladder is designed as a standard-duty lift ladder for floating docks, giving swimmers and boat passengers a reliable, corrosion-resistant way to get in and out of the water.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JIF Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e EWI4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Floating Dock Lift Ladder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Steps:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Width:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Anodized Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 7.1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 48.8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Height:\u003c\/strong\u003e 48.8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Retractable, Double Ring Locking Mechanism\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 21 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many steps does the JIF Marine EWI4 dock ladder have?\u003c\/strong\u003e The EWI4 has 4 steps, each 2 inches wide, giving a standard step surface for climbing in and out of the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this ladder stay submerged in the water?\u003c\/strong\u003e No, the EWI4 retracts and slides up above the waterline when not in use, which helps reduce marine growth and corrosion on the steps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the EWI4 dock ladder made from?\u003c\/strong\u003e It is made from anodized aluminum, a corrosion-resistant material suited to fresh and saltwater dock environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the JIF Marine EWI4?\u003c\/strong\u003e The EWI4 measures 7.1 inches long, 20 inches wide, and 48.8 inches high, with a maximum extended height of 48.8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the ladder stay in place when extended?\u003c\/strong\u003e A double ring locking mechanism holds the JIF Marine EWI4 in the extended position for stability while in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the EWI4 dock ladder weigh?\u003c\/strong\u003e The JIF Marine EWI4 weighs 21 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the EWI4 ladder?\u003c\/strong\u003e It has a silver finish, consistent with its anodized aluminum construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the EWI4 designed for floating docks?\u003c\/strong\u003e Yes, the JIF Marine EWI4 is a floating dock lift ladder designed to mount on a floating dock and retract above the waterline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow wide are the steps on the EWI4?\u003c\/strong\u003e Each step on the EWI4 is 2 inches wide, described as the standard step size for this ladder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the EWI4 ladder corrode over time?\u003c\/strong\u003e The anodized aluminum construction of the EWI4 is built to resist corrosion, making it suitable for ongoing exposure to water.\u003c\/p\u003e","brand":"JIF Marine","offers":[{"title":"Default Title","offer_id":49025247707355,"sku":"JIF-EWI4","price":291.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41BrDEucG_L.jpg?v=1785331087"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/130-2_10_3bb3c002-d769-4a5c-a552-ac7cbaee094c.jpg?v=1785356942","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-docking-fendering-dock-hardware-dock-bumpers-ladders.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}