{"title":"Dock Hardware","description":null,"products":[{"product_id":"sea-dog-040104-1-open-base-cleat-4-inch-flat-head-hot-dipped-galvanized-cast-iron-pair-for-recreational-boats-and-docks","title":"Sea-Dog Hot Dipped Galvanized Cast Iron Flat Head Open Base Cleat, 4 Inch, Pair - 040104-1","description":"\u003cp\u003eThe Sea-Dog 040104-1 is a 4 inch flat head open base cleat constructed of hot dipped galvanized cast iron for corrosion resistance in marine environments. It is designed for use on smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications. The open base, flat head design allows the cleat to sit low and flush against the mounting surface, giving dock lines and mooring lines a secure, snag-resistant tie-off point. This listing is for a matched pair of cleats, each installed with two flat head thru-bolts (not included). The hot dip galvanizing process bonds a protective zinc coating to the cast iron body, helping the cleat resist rust and saltwater corrosion over repeated exposure. Sized specifically at the 4 inch length, this cleat uses a #10 flat head fastener and fits the corresponding bolt-hole dimensions listed below. Sea-Dog offers this same open base cleat design in multiple sizes (3-1\/2 inch through 14 inch), so boat owners can match cleat size to boat length and line diameter. Choose the 040104-1 when a compact, budget-friendly, corrosion-resistant cleat pair is needed for smaller boats, tenders, jon boats, and residential or recreational docks.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040104-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Hot Dipped Galvanized Cast Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hot Dipped Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Two flat head thru-bolts required (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.498 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5 x 4 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514040020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eIntended for smaller recreational boats and recreational docks; not recommended for large boats or commercial applications.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 040104-1 cleat?\u003c\/strong\u003e The Sea-Dog 040104-1 is a 4 inch flat head open base cleat, measured as the primary length dimension of the cleat body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat sold as a single unit or a pair?\u003c\/strong\u003e The 040104-1 is sold as a pair of two matching cleats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 040104-1 cleat made from?\u003c\/strong\u003e It is made of hot dipped galvanized cast iron, which provides corrosion resistance for marine and dockside use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used on large boats or commercial vessels?\u003c\/strong\u003e No. The 040104-1 flat head open base cleat is designed for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener size does the 040104-1 use?\u003c\/strong\u003e This cleat uses a #10 flat head fastener and installs with two flat head thru-bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting bolts included with the 040104-1?\u003c\/strong\u003e No, the two flat head thru-bolts needed to install the Sea-Dog 040104-1 cleat are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 040104-1 cleat pair weigh?\u003c\/strong\u003e The Sea-Dog 040104-1 pair weighs 0.498 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the key dimensions of the 040104-1 cleat?\u003c\/strong\u003e The 040104-1 measures 4 inches (A), with additional body dimensions of 1-1\/8 inches (B), 7\/8 inch (C), and 1-7\/8 inches (D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is it called an open base cleat?\u003c\/strong\u003e The 040104-1 has an open base, flat head design that sits low against the mounting surface, which is characteristic of Sea-Dog's flat head open base cleat line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 040104-1 and other sizes in this cleat line?\u003c\/strong\u003e The 040104-1 is the 4 inch size in Sea-Dog's flat head open base cleat family, which also includes 3-1\/2 inch, 5 inch, 6 inch, 8 inch, 10 inch, 12 inch, and 14 inch versions with correspondingly larger dimensions and fastener sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 040104-1 cleat pair?\u003c\/strong\u003e The UPC for this Sea-Dog 4 inch open base cleat pair is 035514040020.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 040104-1 corrode in saltwater?\u003c\/strong\u003e The hot dipped galvanized cast iron construction of the 040104-1 is corrosion resistant, making it suitable for saltwater and marine dock environments.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543221979,"sku":"S-D-040104-1","price":6.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3956.jpg?v=1784421515"},{"product_id":"sea-dog-cl209-midi-clamcleat-nylon-rope-cleat-for-5-32-to-5-16-in-4-8-mm-line-mpn-002090-1","title":"Sea-Dog CL209 Clamcleat Midi Rope Cleat for 3\/16 to 5\/16 Inch Rope, Black Aluminum","description":"\u003cp\u003eThe Sea-Dog CL209 Clamcleat Midi is a cam-style rope cleat designed to grip and hold line under load without the need to wrap or tie off, letting you release rope instantly with a simple upward pull. Sized for rope diameters from 3\/16 inch to 5\/16 inch, it is well suited to halyards, sheets, fender lines, and other running rigging on small to mid-size boats where quick, one-handed cleating is useful. The cleat body is cast from aluminum and finished in black, giving it a low-profile look that blends in with dark hardware and trim.\u003c\/p\u003e\u003cp\u003eUnlike a traditional horn cleat, the clamcleat design uses angled teeth to bite the rope automatically as tension is applied, then releases cleanly when the line is pulled up and out of the jaw. This makes it a practical upgrade anywhere fast, repeated cleating and uncleating is needed. The unit measures 2-7\/8 inches in length with a 2-1\/8 inch inside length and a 3\/4 inch width, and it mounts with 3\/16 inch screws (not included) through the base.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 002090-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Clamcleat Midi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Diameter Range:\u003c\/strong\u003e 3\/16 inch to 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 2-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Length:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Size:\u003c\/strong\u003e 3\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.052 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rope does the Sea-Dog CL209 fit?\u003c\/strong\u003e The Sea-Dog CL209 Clamcleat Midi is designed for rope diameters from 3\/16 inch to 5\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a Clamcleat rope cleat work?\u003c\/strong\u003e It uses angled teeth inside the cleat jaw that bite down on the rope automatically as tension is applied, holding the line without wrapping or tying it off; pulling the rope up and out of the jaw releases it instantly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the CL209 made from?\u003c\/strong\u003e The CL209 cleat body is aluminum, finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this cleat?\u003c\/strong\u003e The Sea-Dog CL209 measures 2-7\/8 inches in length and 3\/4 inch in width, with an inside length of 2-1\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat screw size is needed to mount the CL209?\u003c\/strong\u003e It mounts using 3\/16 inch screws, which are not included with part number 002090-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CL209 weigh?\u003c\/strong\u003e This cleat weighs 0.052 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CL209 a locking cleat?\u003c\/strong\u003e Yes, in effect: the cam-style jaw grips the rope under load so it stays cleated without needing to be tied, and releases only when the rope is pulled clear of the teeth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this cleat?\u003c\/strong\u003e The part is Sea-Dog 002090-1, also known as the CL209 Midi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the CL209 come in?\u003c\/strong\u003e It is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this cleat typically used for on a boat?\u003c\/strong\u003e Because it grips and releases rope quickly without tying off, the CL209 Midi suits applications like halyards, sheets, and fender lines where fast, one-handed cleating is helpful.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CL209 come with mounting hardware?\u003c\/strong\u003e No, the Sea-Dog CL209 (002090-1) requires 3\/16 inch mounting screws that are sold separately.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543254747,"sku":"S-D-002090-1","price":6.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6242.jpg?v=1784421536"},{"product_id":"sea-dog-040105-1-flat-head-open-base-cleat-5-in-hot-dipped-galvanized-cast-iron-pair","title":"Sea-Dog Flat Head Open Base Cleat, 5 Inch, Galvanized Cast Iron","description":"\u003cp\u003eThe Sea-Dog 5 inch Flat Head Open Base Cleat is a hot dipped galvanized cast iron dock and deck cleat designed for smaller recreational boats and recreational docks. Its open base and flat head design give it a low profile that lies flatter against the mounting surface than a raised-base cleat, making it easy to walk over and less likely to snag lines or feet on deck. The corrosion resistant hot dipped galvanizing protects the cast iron body against the marine environment, holding up to saltwater spray and everyday dock use.\u003c\/p\u003e\u003cp\u003eThis cleat installs with two flat head thru-bolts sized for a #12 fastener (bolts not included), so hardware is countersunk for a clean, snag-free finish. It measures 5 inches overall (A), with a base footprint of 1-5\/16 inches (B) by 1-1\/16 inches (C) and an overall width of 2-3\/16 inches (D), giving a compact profile suited to smaller craft and dock applications. Sea-Dog notes this cleat is not recommended for large boats or commercial applications, so it is best matched to recreational boats and residential dock hardware where a smaller, lighter-duty cleat is appropriate.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040105-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #12 Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Two flat head thru-bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Hot Dipped Galvanized Cast Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.646 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each \/ 10 pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514040037\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRecommended Use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSmaller recreational boats and recreational docks\u003c\/li\u003e\n\u003cli\u003eNot recommended for large boats or commercial applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 040105-1 cleat?\u003c\/strong\u003e The Sea-Dog 040105-1 measures 5 inches overall in length, with a base footprint of 1-5\/16 inches by 1-1\/16 inches and an overall width of 2-3\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e It is made from hot dipped galvanized cast iron, which resists corrosion in marine and dockside environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with the 040105-1 cleat?\u003c\/strong\u003e No. The Sea-Dog 040105-1 installs with two flat head thru-bolts sized for a #12 fastener, but the bolts themselves are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat rated for large boats?\u003c\/strong\u003e No, Sea-Dog states this flat head open base cleat is designed for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'open base' mean for this cleat design?\u003c\/strong\u003e An open base cleat, like the Sea-Dog 040105-1, has an open area beneath the horns rather than a solid base plate, which is the standard low-profile flat head cleat style used on smaller boats and docks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 040105-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog 040105-1 weighs 0.646 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cleats come in a package?\u003c\/strong\u003e The 040105-1 is packed in a standard pack of 10 each or 10 pairs, though individual listings may sell it in smaller quantities.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used on a dock instead of a boat?\u003c\/strong\u003e Yes, Sea-Dog specifies this cleat for use on both smaller recreational craft and recreational docks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener size does the 040105-1 use?\u003c\/strong\u003e This cleat uses a #12 flat head fastener for its two mounting thru-bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cleat have a UPC for retail tracking?\u003c\/strong\u003e Yes, the Sea-Dog 040105-1 5 inch cleat carries UPC 035514040037.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543385819,"sku":"S-D-040105-1","price":7.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3956_ee533315-5bac-433a-a08c-739216ca85e1.jpg?v=1784421620"},{"product_id":"sea-dog-040108-1-flat-head-open-base-cleat-8-hot-dipped-galvanized-cast-iron-dock-cleat","title":"Sea-Dog 040108-1 Flat Head Open Base Cleat, 8 Inch, Galvanized Cast Iron","description":"\u003cp\u003eThe Sea-Dog 040108-1 is an 8 inch Flat Head Open Base Cleat built for securing dock lines on smaller recreational boats and recreational docks. It is cast from corrosion resistant hot dipped galvanized cast iron, giving it long-term resistance to rust and saltwater exposure while keeping a traditional open-base look that lets water drain away rather than pooling under the cleat. The flat head design sits low against the mounting surface, and the open base makes it easy to wrap and cleat off dock lines quickly.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the 040108-1 mounts with two flat head thru-bolts (not included), passing through 5\/16 inch bolt holes for a secure, low-profile fit. Sea-Dog notes this cleat is intended for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications, so it is best suited for runabouts, small cruisers, pontoons, jon boats, and residential dock installations rather than heavy-duty commercial mooring.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040108-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Hot dipped galvanized cast iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Length:\u003c\/strong\u003e 3-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThru-Bolt Hole Diameter:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Two flat head thru-bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.184 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Smaller recreational craft and recreational docks; not recommended for large boats or commercial applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514040051\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 040108-1 cleat made of?\u003c\/strong\u003e The 040108-1 is constructed of corrosion resistant hot dipped galvanized cast iron, which resists rust in saltwater and freshwater dock environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this cleat?\u003c\/strong\u003e The Sea-Dog 040108-1 measures 8 inches overall in length, with a base width of 2-1\/8 inches and a height of 1-11\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size bolts do I need to mount this cleat?\u003c\/strong\u003e The 040108-1 has thru-bolt holes sized at 5\/16 inch and installs with two flat head thru-bolts, which are not included with the cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat rated for large boats or commercial use?\u003c\/strong\u003e No. The Sea-Dog 040108-1 is designed for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'open base' mean for this cleat design?\u003c\/strong\u003e An open base cleat like the 040108-1 has a hollow underside rather than a solid base, which allows water to drain away instead of collecting underneath the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cleat come with mounting hardware?\u003c\/strong\u003e No, the Sea-Dog 040108-1 requires two flat head thru-bolts for installation, and these bolts are not included in the package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 040108-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog 040108-1 weighs 1.184 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'flat head' refer to on this cleat?\u003c\/strong\u003e Flat head describes the low-profile design of the 040108-1, where the cleat sits close to the mounting surface rather than standing up on raised horns or a pedestal base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 040108-1 sold as a single cleat or in a set?\u003c\/strong\u003e The Sea-Dog 040108-1 is sold individually (per each), with a standard case pack of 10 each for retailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat rust over time in saltwater?\u003c\/strong\u003e The 040108-1 is hot dipped galvanized cast iron, a finish specifically chosen for corrosion resistance in marine environments, though like any iron product it should be inspected periodically for wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the base footprint of the 040108-1 cleat?\u003c\/strong\u003e The Sea-Dog 040108-1 has a base length of 3-1\/4 inches, sized to match its 8 inch overall length and 2-1\/8 inch base width.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543451355,"sku":"S-D-040108-1","price":9.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3956_284245e1-17a1-4534-a41d-6e7aad6c75ab.jpg?v=1784421625"},{"product_id":"sea-dog-040106-1-flat-head-open-base-cleat-6-inch-hot-dipped-galvanized-cast-iron-dock-cleat","title":"Sea-Dog 040106-1 Flat Head Open Base Cleat, 6 Inch, Galvanized Cast Iron","description":"\u003cp\u003eThe Sea-Dog 040106-1 is a 6 inch flat head open base cleat built for securing docking and mooring lines on smaller recreational craft and recreational docks. It is constructed of cast iron with a hot dipped galvanized finish that resists corrosion in wet marine environments, giving it a durable silver finish that holds up to repeated line loading and weather exposure. The open base design allows lines to be wrapped and cleated off quickly, while the flat head profile sits low against the mounting surface for a clean, low-profile installation. This cleat installs with two flat head thru-bolts (not included), which pass through the mounting holes sized for 1\/4 inch hardware. It is sold as a single cleat. Sea-Dog specifies this model for use on smaller recreational boats and recreational docks and does not recommend it for large boats or commercial applications, so buyers should size their line loads accordingly. Sea-Dog Line has manufactured marine hardware since 1933 and has received multiple industry awards for quality and efficiency. This part number, 040106-1, corresponds to the 6 inch size within Sea-Dog's flat head open base cleat lineup, which also includes 3-1\/2 inch, 4 inch, 5 inch, 8 inch, 10 inch, 12 inch, and 14 inch versions for different boat and dock sizes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040106-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Length:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Hole Spacing:\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Hole Diameter:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Style:\u003c\/strong\u003e Open Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hot Dipped Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7.88 x 3.88 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.878 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Two flat head thru-bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Smaller recreational boats and recreational docks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514040044\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 040106-1 cleat?\u003c\/strong\u003e The Sea-Dog 040106-1 is 6 inches in overall length, with a base length of 1-1\/4 inches and a bolt hole spacing of 2-3\/16 inches, making it one of the mid-size options in Sea-Dog's flat head open base cleat lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this cleat made of?\u003c\/strong\u003e It is made of cast iron with a hot dipped galvanized finish, which gives the 040106-1 corrosion resistance for use in wet marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 040106-1 cleat come with mounting bolts?\u003c\/strong\u003e No, the Sea-Dog 040106-1 installs with two flat head thru-bolts sized for its 1\/4 inch bolt holes, but the bolts themselves are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat rated for large boats or commercial use?\u003c\/strong\u003e No. Sea-Dog specifies the 040106-1 flat head open base cleat for use on smaller recreational craft and recreational docks, and it is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 040106-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog 040106-1 flat head open base cleat weighs 0.878 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'open base' mean on this cleat?\u003c\/strong\u003e An open base cleat has a gap beneath the horns rather than a solid base plate, which is the design used on the Sea-Dog 040106-1 and lets dock lines be wrapped and cleated off quickly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does this cleat have?\u003c\/strong\u003e The 040106-1 has a silver, hot dipped galvanized finish over its cast iron construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 040106-1 sold as a single cleat or a pair?\u003c\/strong\u003e It is sold as a single cleat; the Sea-Dog 040106-1 is not packaged as a matched pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size bolts does the 040106-1 cleat need?\u003c\/strong\u003e The mounting holes on the Sea-Dog 040106-1 are sized for 1\/4 inch flat head thru-bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this cleat's packaging or footprint?\u003c\/strong\u003e The Sea-Dog 040106-1 measures 7.88 x 3.88 x 1.5 inches overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other sizes of this same cleat available?\u003c\/strong\u003e Yes, Sea-Dog makes this flat head open base cleat in several other lengths, including 3-1\/2 inch, 4 inch, 5 inch, 8 inch, 10 inch, 12 inch, and 14 inch versions, each under its own part number; the 040106-1 is the 6 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes the 040106-1 cleat and how long has the company been in business?\u003c\/strong\u003e The 040106-1 is made by Sea-Dog Line, a family-owned marine hardware manufacturer that has been in business since 1933.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543484123,"sku":"S-D-040106-1","price":7.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3956_19b9baa7-d8c9-4ffb-a3ff-98aa5a6a8e1e.jpg?v=1784421626"},{"product_id":"sea-dog-040112-flat-head-open-base-cleat-12-in-hot-dipped-galvanized-cast-iron-dock-cleat","title":"Sea-Dog Flat Head Open Base Cleat, 12 Inch, Hot-Dipped Galvanized Cast Iron","description":"\u003cp\u003eThe Sea-Dog 040112 is a 12 inch flat head open base cleat built for securing dock lines on smaller recreational craft and recreational docks. It is cast from corrosion resistant hot dipped galvanized cast iron, giving it a durable finish that stands up to marine environments while keeping the classic open base cleat profile that lets lines run cleanly across the horns. The flat head design sits low and installs flush using two flat head thru-bolts (not included), which pass through the mounting holes for a secure, low-profile hold on the deck or dock surface. This cleat is intended for smaller recreational boats and recreational docks and is not recommended for large boats or commercial applications. Each unit measures 12 inches overall and is packed 5 to a standard pack. With its galvanized finish and cast iron construction, the Sea-Dog 040112 offers a reliable, corrosion resistant mounting point for dock lines, fender lines, and general tie-off duty on smaller vessels and dock structures.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e 3\/8 inch flat head thru-bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Style:\u003c\/strong\u003e Open Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hot-dipped galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514040129\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Smaller recreational boats and recreational docks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Recommended For:\u003c\/strong\u003e Large boats or commercial applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 040112 cleat?\u003c\/strong\u003e The Sea-Dog 040112 is a 12 inch open base cleat, measured overall length from horn to horn.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 040112 cleat made of?\u003c\/strong\u003e It is cast from corrosion resistant hot dipped galvanized cast iron, which gives the Sea-Dog 040112 its durable, weather resistant finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 040112 cleat come with mounting bolts?\u003c\/strong\u003e No, the Sea-Dog 040112 installs with two flat head thru-bolts sized 3\/8 inch, but the bolts themselves are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat rated for large boats?\u003c\/strong\u003e No. The 040112 flat head open base cleat is designed for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat head style is the 040112 cleat?\u003c\/strong\u003e It uses a flat head design, meaning the mounting holes are countersunk so the thru-bolts sit flush with the cleat base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is an open base cleat?\u003c\/strong\u003e An open base cleat, like the Sea-Dog 040112, has a base with a gap beneath the horns rather than a solid closed base, allowing lines to be led underneath as well as around the horns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cleats come in a package?\u003c\/strong\u003e The Sea-Dog 040112 is packed 5 to a standard pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 040112 cleat weigh?\u003c\/strong\u003e The Sea-Dog 040112 weighs 3.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat rust over time?\u003c\/strong\u003e The hot dipped galvanized finish on the Sea-Dog 040112 is corrosion resistant, which helps protect the cast iron base from rust in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 040112 cleat?\u003c\/strong\u003e The UPC for the Sea-Dog 040112 flat head open base cleat is 035514040129.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 040112 cleat be used on a dock?\u003c\/strong\u003e Yes, the Sea-Dog 040112 is intended for use on recreational docks as well as smaller recreational boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 040112 cleat different from the smaller sizes in the line?\u003c\/strong\u003e The 040112 is the 12 inch version in Sea-Dog's flat head open base cleat range, which also includes 6, 8, 10, and 14 inch sizes with correspondingly larger dimensions and thru-bolt sizes as the cleat length increases.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543516891,"sku":"S-D-040112","price":16.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3956_9a014dc6-07eb-4a18-8a55-f480373d417f.jpg?v=1784421636"},{"product_id":"sea-dog-041404-1-folding-stud-mount-cleat-4-1-2-in-investment-cast-316-stainless-steel","title":"Sea-Dog Folding Stud Mount Cleat 041404-1, 4-1\/2 Inch, 316 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog Folding Stud Mount Cleat (041404-1) is a highly polished investment cast 316 stainless steel cleat designed to lock down flat against the deck when not in use and flip back up when it is time to tie off. This folding action keeps the deck clear of a permanently upright cleat that could snag lines, sails, or feet when the boat is underway or at rest.\u003c\/p\u003e\u003cp\u003eThe cleat uses a surface mount, stud mount design, so no drain tubes or receptacles are required to prevent leaks into the deck below. Installation is straightforward: two standard bit size holes are drilled for the mounting studs, eliminating the need for cutouts or hole saws. The stud mounted fasteners are hidden beneath the deck surface, giving the topside an attractive, flush appearance with no visible bolt heads.\u003c\/p\u003e\u003cp\u003eConstructed of corrosion resistant investment cast 316 stainless steel and finished with a high polish, this cleat is built to stand up to a marine environment while maintaining a clean, finished look. It is sized for 4-1\/2 inch base applications and secures with a 1\/4 inch-20 NC threaded fastener.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041404-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Folding Stud Mount Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface Mount \/ Stud Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 6-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 4-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension F:\u003c\/strong\u003e 2-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 1\/4 inch-20 NC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.81 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 10 x 5.81 x 2.38 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041607\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 041404-1 cleat made of?\u003c\/strong\u003e The Sea-Dog 041404-1 Folding Stud Mount Cleat is made of investment cast 316 stainless steel with a highly polished finish, giving it strong corrosion resistance for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cleat fold down when not in use?\u003c\/strong\u003e Yes, the 041404-1 folding cleat locks down flat against the deck when not needed and flips back up when it is time to tie off a line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog folding cleat mounted?\u003c\/strong\u003e It is a surface mount, stud mount cleat installed through two standard bit size holes drilled for the studs, so no cutouts or hole saws are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre drain tubes or receptacles needed to install this cleat?\u003c\/strong\u003e No. Because the 041404-1 is a surface mount cleat, no drain tubes or receptacles are required to prevent leaks at the mounting holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the mounting hardware be visible after installation?\u003c\/strong\u003e No, the stud mounted fasteners on the Sea-Dog 041404-1 cleat are hidden beneath the deck, leaving a clean, flush appearance on top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size cleat is the 041404-1?\u003c\/strong\u003e The 041404-1 measures 6-7\/16 inches (dimension A) by 4-1\/2 inches (dimension B), with a height of 2-1\/8 inches (dimension C).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener size does this cleat use?\u003c\/strong\u003e The Sea-Dog 041404-1 folding cleat uses a 1\/4 inch-20 NC threaded stud fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cleat weigh?\u003c\/strong\u003e The Sea-Dog Folding Stud Mount Cleat 041404-1 weighs 0.81 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat resistant to corrosion in saltwater?\u003c\/strong\u003e Yes, it is constructed of investment cast 316 stainless steel, which is corrosion resistant and suited to marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 041404-1 come in different sizes?\u003c\/strong\u003e The 041404-1 is the 4-1\/2 inch (dimension B) size in Sea-Dog's folding stud mount cleat line, which also includes larger cleats using 5\/16 inch-18 NC and 3\/8 inch-16 NC fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Sea-Dog 041404-1 cleat have?\u003c\/strong\u003e It has a highly polished finish over the investment cast 316 stainless steel body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sea-Dog 041404-1 cleat?\u003c\/strong\u003e Each Sea-Dog 041404-1 Folding Stud Mount Cleat is a single cleat unit with its stud mount fasteners.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543615195,"sku":"S-D-041404-1","price":51.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7463.jpg?v=1784421665"},{"product_id":"sea-dog-040110-flat-head-open-base-dock-cleat-10-in-hot-dipped-galvanized-cast-iron","title":"Sea-Dog Flat Head Open Base Cleat 040110, 10 Inch, Galvanized Cast Iron","description":"\u003cp\u003eThe Sea-Dog 040110 is a 10 inch flat head open base cleat built for securing dock lines and mooring lines on smaller recreational boats and recreational docks. It is constructed of corrosion resistant hot dipped galvanized cast iron, giving it the strength of cast iron with a protective galvanized finish that resists rust and corrosion in wet marine environments. The open base design allows lines to be wrapped and cleated off quickly, while the low-profile flat head shape keeps the cleat from becoming a snag point on deck or dock surfaces.\u003c\/p\u003e\u003cp\u003eThis cleat installs with two flat head thru-bolts (not included), which pass through the base and seat flush for a clean, secure mount. At 10 inches overall length, the 040110 sits in the middle of Sea-Dog's flat head open base cleat lineup, sized for boats and dock applications that need more holding capacity than the smaller 5, 6, and 8 inch versions but do not require the largest 12 or 14 inch sizes. Sea-Dog notes this cleat is intended for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Cast Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hot Dipped Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Style:\u003c\/strong\u003e Open Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Length:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width:\u003c\/strong\u003e 2-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height:\u003c\/strong\u003e 4-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Hole Diameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Installs with two flat head thru-bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514040112\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 040110 cleat?\u003c\/strong\u003e The 040110 measures 10 inches in overall length, with a base of 2-1\/2 inches by 2-3\/8 inches and an overall height of 4-1\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 040110 cleat made of?\u003c\/strong\u003e It is made of hot dipped galvanized cast iron, which combines the strength of cast iron with a galvanized finish that resists rust and corrosion in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 040110 come with mounting bolts?\u003c\/strong\u003e No, the 040110 installs with two flat head thru-bolts, and the bolts are not included with the cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size bolts does this cleat use?\u003c\/strong\u003e The 040110 has a bolt hole diameter of 3\/8 inch for its two flat head thru-bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 10 inch Sea-Dog cleat weigh?\u003c\/strong\u003e The Sea-Dog 040110 flat head open base cleat weighs 2.13 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 040110 cleat suitable for large boats?\u003c\/strong\u003e No, Sea-Dog states this flat head open base cleat is intended for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is an open base cleat used for?\u003c\/strong\u003e An open base cleat like the 040110 is used to secure dock lines and mooring lines, with an open design under the horns that makes it easy to wrap and cleat off a line quickly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a flat head cleat instead of a horn cleat with a raised base?\u003c\/strong\u003e The flat head design of the 040110 keeps the cleat low profile against the mounting surface, reducing the chance of the base catching lines or gear on deck or dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many 040110 cleats come in a package?\u003c\/strong\u003e The Sea-Dog 040110 has a standard pack quantity of 10 each and is also sold individually per each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 040110 different from the smaller Sea-Dog flat head cleats?\u003c\/strong\u003e Yes, the 040110 is the 10 inch size in Sea-Dog's flat head open base cleat line, which also includes 5, 6, 8, 12, and 14 inch versions with correspondingly different base dimensions and weights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Sea-Dog 040110 be used outdoors in saltwater environments?\u003c\/strong\u003e Yes, the hot dipped galvanized finish on the 040110 is corrosion resistant, making it suitable for exposed marine and dock environments.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543647963,"sku":"S-D-040110","price":11.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3956_46f665b8-cbeb-4cee-b5e8-bf38fc2d7873.jpg?v=1784421668"},{"product_id":"sea-dog-041604-1-open-base-cleat-4-inch-investment-cast-316-stainless-steel","title":"Sea-Dog 041604-1 Open Base Cleat, 4 Inch, 316 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog 041604-1 is a 4 inch open base cleat built for reliable line tie-off on deck, dock, or hull. It is investment cast from 316 stainless steel, a grade chosen for its resistance to corrosion in saltwater and marine environments, so the cleat holds its finish and strength through repeated exposure to spray and sun. The open base, classic horn design gives boaters a simple, low-profile fitting for securing dock lines, fenders, and rigging. It installs with four flathead thru-bolts sized for #10 fasteners (fasteners are sold separately). Sold individually, this 4 inch size is one of a full range of Sea-Dog open base cleats, so boat owners can match cleat size to line diameter and deck space across the vessel. The gray stainless finish suits both classic and modern boat styling.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041604-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 15\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen Base Width (C):\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 flathead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.22 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface mount, open base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each (sold individually)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041072\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal mounting cleat; not model or engine specific.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers apply to this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 041604-1 cleat?\u003c\/strong\u003e The 041604-1 is the 4 inch open base cleat, measuring 4 inches overall in length with a 1-3\/4 inch open base width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e It is investment cast from 316 stainless steel, a corrosion-resistant grade suited to saltwater and marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install the 041604-1 cleat?\u003c\/strong\u003e Installation uses four flathead thru-bolts sized for #10 fasteners; the fasteners are not included with the cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 041604-1 an open base or closed base cleat?\u003c\/strong\u003e This is an open base cleat, with an open base width of 1-3\/4 inches, giving a classic tie-off style rather than a solid base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 4 inch Sea-Dog cleat weigh?\u003c\/strong\u003e The Sea-Dog 041604-1 weighs 0.22 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 041604-1 come with mounting hardware?\u003c\/strong\u003e No, the four #10 flathead thru-bolts required for mounting are sold separately from the 041604-1 cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat sold individually or in a set?\u003c\/strong\u003e The 041604-1 is sold individually, one cleat per unit, though it is packed in standard quantities of 10 for bulk distribution.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does the 041604-1 have?\u003c\/strong\u003e This cleat has a gray stainless steel finish, consistent with its 316 stainless construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other sizes are available besides the 4 inch open base cleat?\u003c\/strong\u003e The 041604-1 is the 4 inch version of Sea-Dog's open base cleat line, which also includes 5, 6, 8, 10, and 12 inch sizes in the same 316 stainless construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill 316 stainless steel resist rust on this cleat?\u003c\/strong\u003e Yes, the 041604-1 is investment cast from 316 stainless steel specifically for corrosion resistance in marine and saltwater conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 041604-1 suitable for both deck and dock mounting?\u003c\/strong\u003e Yes, this open base cleat is a general-purpose surface-mount fitting suitable for deck, dock, or hull installation wherever line tie-off is needed.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543680731,"sku":"S-D-041604-1","price":21.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3964.jpg?v=1784421670"},{"product_id":"sea-dog-041426-pull-up-cleat-6-1-4-flush-mount-investment-cast-316-stainless-steel-boat-cleat-with-hidden-studs","title":"Sea-Dog Pull-Up Cleat, 5-3\/4 Inch, 316 Stainless Steel Flush Mount Deck Cleat with Studs","description":"\u003cp\u003eThis Sea-Dog Pull-Up Cleat is a flush-mount deck cleat that recesses into the deck surface for a clean, contemporary look when not in use. It is investment cast from 316 stainless steel, giving it strong corrosion resistance for marine environments. The cleat uses stud-mounted fasteners that are hidden from view once installed, so there is no visible hardware on the deck surface. The mounting studs are sized to accept an optional drain fitting, allowing water that collects in the recessed cleat pocket to drain down to the bilge instead of pooling on deck.\u003c\/p\u003e\u003cp\u003eThis is the 5-3\/4 inch bulk-pack version of the cleat (part number 041426). A matching backing plate and drain fitting are available as separate accessories for this cleat size. Bulk-pack cleats do not include the backing plate; that plate is only bundled with the display-packaged version of this cleat line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041426\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment cast 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Pull-up flush deck cleat with hidden stud mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 6-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 5-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 7\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension F:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.75 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack Quantity:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041515\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Backing Plate:\u003c\/strong\u003e 041486 (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Drain Fitting:\u003c\/strong\u003e 041596 (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this Sea-Dog pull-up cleat?\u003c\/strong\u003e The Sea-Dog Pull-Up Cleat, part number 041426, measures 6-1\/4 inches by 5-3\/4 inches overall, with a height of 1-3\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 041426 cleat made from?\u003c\/strong\u003e It is investment cast from 316 stainless steel, a marine-grade alloy chosen for its corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cleat sit flush with the deck?\u003c\/strong\u003e Yes, this is a pull-up style cleat designed to recess flush into the deck when not in use, giving a clean, uncluttered deck surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the mounting fasteners visible on the 041426 cleat?\u003c\/strong\u003e No, part number 041426 uses stud-mounted fasteners that are hidden once the cleat is installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 041426 cleat include a backing plate?\u003c\/strong\u003e No, this bulk-pack version of the cleat does not include a backing plate. The matching backing plate for this cleat size is part number 041486 and is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan water drain out of this cleat pocket?\u003c\/strong\u003e Yes, the studs on the 041426 cleat will accept an optional drain fitting (part number 041596, sold separately) that lets water drain down to the bilge instead of collecting in the recess.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 041426 pull-up cleat weigh?\u003c\/strong\u003e The Sea-Dog Pull-Up Cleat 041426 weighs 1.75 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the stud diameter on this cleat?\u003c\/strong\u003e Dimension D on the 041426 cleat, corresponding to the stud size, is 7\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this cleat and Sea-Dog part 041424?\u003c\/strong\u003e Part 041426 is the 5-3\/4 inch size in Sea-Dog's pull-up cleat lineup, while 041424 is a smaller 4-1\/2 inch version; both share the same investment cast 316 stainless steel construction and hidden stud mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat sold individually or in bulk?\u003c\/strong\u003e Part number 041426 is packaged as a bulk item with a standard pack quantity of 10 each, and it does not include the backing plate that comes with the display-packaged version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the correct backing plate for the Sea-Dog 041426 cleat?\u003c\/strong\u003e The correct backing plate for the 5-3\/4 inch Sea-Dog Pull-Up Cleat (041426) is part number 041486, sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an original Sea-Dog part?\u003c\/strong\u003e Yes, part number 041426 is the genuine Sea-Dog manufacturer part number for the 5-3\/4 inch stainless steel pull-up cleat.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543713499,"sku":"S-D-041426","price":78.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7464.jpg?v=1784421674"},{"product_id":"sea-dog-041606-1-open-base-cleat-6-inch-investment-cast-316-stainless-steel-universal-deck-mount","title":"Sea-Dog 041606-1 Open Base Cleat, 6 Inch, Investment Cast 316 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog 041606-1 is a 6 inch open base cleat built for easy line tie-off on deck, dock, or dinghy. It is investment cast from 316 stainless steel, a grade chosen for its resistance to saltwater corrosion, so the cleat holds its finish and structural integrity in a marine environment far better than plated steel or lower-grade alloys. The open base design gives quick access for wrapping and releasing dock lines, and the classic profile suits traditional boat and dock hardware layouts.\u003c\/p\u003e\u003cp\u003eThis cleat has a 6 inch overall length and a 2-1\/4 inch base width. It installs with four 1\/4 inch flat head thru-bolts (bolts are not included), so plan to have matching hardware and backing on hand for a secure through-deck installation. At 0.378 pounds, it is a compact, easy-to-handle piece of hardware suited to a wide range of boats and dock setups.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041606-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 1\/4 inch flat head thru-bolt (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Required:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.378 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041034\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Open base, four-hole thru-bolt\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Sea-Dog 041606-1 cleat?\u003c\/strong\u003e It has a 6 inch overall length, matching the 041606-1 designation in the Sea-Dog open base cleat lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 041606-1 cleat made from?\u003c\/strong\u003e Investment cast 316 stainless steel, chosen for corrosion resistance in saltwater and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow wide is the base of this cleat?\u003c\/strong\u003e The base width is 2-1\/4 inches on the Sea-Dog 041606-1 open base cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware do I need to install this cleat?\u003c\/strong\u003e Four 1\/4 inch flat head thru-bolts are required to mount the 041606-1; the bolts are not included and must be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 041606-1 come with mounting bolts?\u003c\/strong\u003e No, mounting bolts are not included with this cleat, only the cleat itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cleat weigh?\u003c\/strong\u003e The Sea-Dog 041606-1 open base cleat weighs 0.378 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat hold up in saltwater?\u003c\/strong\u003e Yes, because it is investment cast from 316 stainless steel, a grade selected specifically for resistance to saltwater corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 041606-1 open base cleat and the Sea-Dog Smart Cleat?\u003c\/strong\u003e The 041606-1 is a standard open base cleat with no knob feature. Sea-Dog also offers the Smart Cleat (041636-1), a 6-1\/4 inch open base cleat cast from the same 316 stainless steel but with a knob end that helps keep lines from slipping off; buyers who want that added line retention should choose that part instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 041606-1 cleat sold individually?\u003c\/strong\u003e Yes, the Sea-Dog 041606-1 open base cleat is sold per each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cleat have an open or closed base?\u003c\/strong\u003e The 041606-1 uses an open base design that installs with four thru-bolts, allowing easy line tie-off around the base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 041606-1 cleat?\u003c\/strong\u003e The UPC for this cleat is 035514041034.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 041606-1 cleat still in production?\u003c\/strong\u003e Yes, this part number is an active, non-discontinued item in the Sea-Dog cleat lineup.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543844571,"sku":"S-D-041606-1","price":23.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3964_f09a6e4b-2fe3-4021-aad9-3fa6cf48202e.jpg?v=1784421712"},{"product_id":"sea-dog-041608-1-open-base-cleat-8-in-investment-cast-316-stainless-steel","title":"Sea-Dog Open Base Cleat, 8 Inch, 316 Stainless Steel, Part 041608-1","description":"\u003cp\u003eThe Sea-Dog Open Base Cleat (part 041608-1) is an 8 inch line tie-off cleat built for corrosion resistance and long-term durability in marine environments. It is constructed of investment cast 316 stainless steel, a grade chosen specifically for its resistance to saltwater corrosion, making it suitable for use on deck, dock, or hull surfaces exposed to constant moisture and salt spray.\u003c\/p\u003e\u003cp\u003eThis cleat uses a classic open base design for easy line tie-off and a traditional look on deck. It installs with four 1\/4 inch flat head thru-bolts (not included), which pass through the open base for a secure, flush mount. The cleat measures 8 inches along its primary dimension, with additional catalog dimensions of 1-1\/2 inches, 2-13\/16 inches, and 1-3\/8 inches, and weighs 0.668 pounds.\u003c\/p\u003e\u003cp\u003eThis 8 inch size is one of several sizes offered in the Sea-Dog Open Base Cleat line, so buyers should confirm the 8 inch length and part number 041608-1 match their intended mounting location before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041608-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-13\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 1\/4 inch Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Four flat head thru-bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.668 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041027\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 041608-1 cleat?\u003c\/strong\u003e The 041608-1 is the 8 inch size in the Sea-Dog Open Base Cleat lineup, with an overall length of 8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e It is made of investment cast 316 stainless steel, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 041608-1 cleat include mounting hardware?\u003c\/strong\u003e No, thru-bolts are not included. The cleat installs with four 1\/4 inch flat head thru-bolts that must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounting bolts does this cleat need?\u003c\/strong\u003e Four flat head thru-bolts are required to install the 041608-1 open base cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the base style of this cleat?\u003c\/strong\u003e The 041608-1 uses an open base design, which allows the four mounting bolts to pass through the open area of the base for a secure, flush installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 8 inch Sea-Dog cleat weigh?\u003c\/strong\u003e The Sea-Dog 041608-1 weighs 0.668 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 316 stainless steel resistant to rust in saltwater?\u003c\/strong\u003e Yes, 316 stainless steel is a marine-grade alloy specifically formulated for corrosion resistance in saltwater, which is why it is used for the 041608-1 open base cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 041608-1 cleat besides its 8 inch length?\u003c\/strong\u003e Beyond the 8 inch overall length, the cleat has catalog dimensions of 1-1\/2 inches, 2-13\/16 inches, and 1-3\/8 inches, and uses a 1\/4 inch flat head fastener size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this cleat used for?\u003c\/strong\u003e The 041608-1 open base cleat is used for tying off dock lines and other lines on a boat deck or dock in a classic open base style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre other sizes of this Sea-Dog cleat available?\u003c\/strong\u003e Yes, the Open Base Cleat design is offered in multiple lengths; the 041608-1 is specifically the 8 inch version, so buyers should confirm this length matches their needs before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 041608-1 a cast or stamped cleat?\u003c\/strong\u003e It is investment cast, not stamped, which is part of how the 041608-1 achieves its corrosion resistant, classic cleat shape.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543910107,"sku":"S-D-041608-1","price":44.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3964_1164f68c-3792-4a72-adf5-74e4921ec956.jpg?v=1784421718"},{"product_id":"sea-dog-041610-1-open-base-cleat-10-in-316-stainless-steel-marine-dock-cleat","title":"Sea-Dog Open Base Cleat, 10 Inch, Investment Cast 316 Stainless Steel, Part 041610-1","description":"\u003cp\u003eThe Sea-Dog Open Base Cleat (part number 041610-1) is a 10 inch line tie-off cleat built for boaters who want dependable corrosion resistance in a classic, unadorned horn shape. It is investment cast from 316 stainless steel, the marine-grade alloy chosen for its resistance to salt water corrosion, so it holds up to repeated exposure at the dock or underway without pitting or staining like lower grades of stainless. The open base design is a traditional cleat profile, offering a straightforward, low-profile mounting footprint that works well anywhere a reliable tie-off point is needed on deck, at the bow, or along a dock.\u003c\/p\u003e\u003cp\u003eThis cleat installs with four 5\/16 inch flat head thru-bolts (fasteners are not included, so plan to source your own hardware sized to your mounting surface thickness). At 10 inches long with a 1-7\/8 inch width, 3-5\/8 inch height, and 1-3\/4 inch base dimension, it is sized for mid-size lines and general-purpose docking and mooring duty. Because it is cast rather than stamped, the cleat resists bending and flexing under load, giving it a longer service life than lighter-weight fittings.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041610-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth (B):\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight (C):\u003c\/strong\u003e 3-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimension (D):\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 5\/16 inch flat head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Four thru-bolt mounting points (fasteners not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.184 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041041\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal deck and dock cleat and is not restricted to a specific boat make, model, or engine; it mounts anywhere a 10 inch open base cleat is appropriate.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 041610-1 cleat?\u003c\/strong\u003e The 041610-1 open base cleat is 10 inches long overall, 1-7\/8 inches wide, 3-5\/8 inches high, with a 1-3\/4 inch base dimension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e It is investment cast from 316 stainless steel, a marine-grade alloy chosen for corrosion resistance in salt water environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 041610-1 cleat come with mounting hardware?\u003c\/strong\u003e No, the Sea-Dog 041610-1 installs with four 5\/16 inch flat head thru-bolts, but the fasteners themselves are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounting bolts does this cleat need?\u003c\/strong\u003e The 041610-1 open base cleat mounts with four thru-bolts, each sized 5\/16 inch flat head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 316 stainless steel better than 304 for boat cleats?\u003c\/strong\u003e 316 stainless steel, which the Sea-Dog 041610-1 is made from, contains molybdenum that gives it stronger resistance to salt water corrosion and pitting than 304 stainless, making it a preferred choice for marine hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this cleat and the Sea-Dog Smart Cleat?\u003c\/strong\u003e The 041610-1 is an open base cleat with a classic straight-horn design, while the Sea-Dog Smart Cleat has a knob end that helps prevent lines from slipping off; both are cast from 316 stainless steel but the Smart Cleat is a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat fit any boat?\u003c\/strong\u003e The Sea-Dog 041610-1 is a universal 10 inch open base cleat, not restricted to a particular boat make or model, and can be mounted anywhere a cleat of this size and bolt pattern is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 041610-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog open base cleat, part 041610-1, weighs 1.184 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat cast or stamped?\u003c\/strong\u003e The 041610-1 is investment cast, not stamped, which gives it more resistance to bending and flexing under load than lighter stamped fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this cleat?\u003c\/strong\u003e The package includes the Sea-Dog 041610-1 open base cleat itself; the four 5\/16 inch flat head thru-bolts needed for mounting are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 041610-1 genuine Sea-Dog hardware?\u003c\/strong\u003e Yes, part number 041610-1 is a genuine Sea-Dog manufactured cleat, not a generic aftermarket copy.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543942875,"sku":"S-D-041610-1","price":61.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3964_effeead3-4c4d-4feb-a06c-84cb7ac90e0b.jpg?v=1784421721"},{"product_id":"sea-dog-041605-1-open-base-cleat-5-inch-316-stainless-steel-boat-dock-cleat","title":"Sea-Dog Open Base Cleat, 5 Inch, 316 Stainless Steel, Model 041605-1","description":"\u003cp\u003eThe Sea-Dog Open Base Cleat (041605-1) is a 5 inch investment cast 316 stainless steel cleat built for secure line tie-off on deck, dock, or hull. Investment casting produces a dense, uniform structure with a smooth, consistent finish, and 316 stainless steel gives the cleat strong resistance to saltwater corrosion, making it suited to long-term marine exposure. The classic open-base horn design lets dock lines, fenders, and mooring lines be tied off quickly and released just as easily, and it mounts to a flat deck or gunwale surface using four flat head thru-bolts (fasteners not included).\u003c\/p\u003e\u003cp\u003eThis cleat is sized at 5 inches overall, with a base footprint and horn height proportioned for that size class in the Sea-Dog open base cleat line, which also includes 4 inch, 6 inch, 8 inch, 10 inch, and 12 inch versions sharing the same investment cast 316 stainless steel construction and open-base, four-bolt mounting pattern. Because it uses standard thru-bolt mounting rather than a proprietary bracket, it is straightforward to install as an upgrade or direct replacement on boats, docks, and other structures that use a comparably sized open base cleat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041605-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (Overall Length):\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #10 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Open Base, Four-Bolt Thru-Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.294 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041089\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 041605-1 cleat?\u003c\/strong\u003e The Sea-Dog 041605-1 is a 5 inch open base cleat, measuring 5 inches in overall length (dimension A), with a base and horn profile of 1-1\/8 inches (B), 2-1\/8 inches (C), and 1 inch (D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made of?\u003c\/strong\u003e This cleat is investment cast from 316 stainless steel, a grade chosen for its resistance to saltwater corrosion in marine hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Sea-Dog 041605-1 mount?\u003c\/strong\u003e It mounts with an open base design using four #10 flat head thru-bolts; the fasteners are not included with the cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cleat weigh?\u003c\/strong\u003e The Sea-Dog 041605-1 open base cleat weighs 0.294 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat suitable for saltwater use?\u003c\/strong\u003e Yes. Because it is investment cast 316 stainless steel, the 041605-1 cleat is built to resist corrosion in saltwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Sea-Dog 5 inch open base cleat, part number 041605-1, has UPC 035514041089.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cleat come with mounting hardware?\u003c\/strong\u003e No, the four #10 flat head thru-bolts needed to mount the 041605-1 cleat are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other sizes does this cleat come in?\u003c\/strong\u003e The Sea-Dog open base cleat design is also offered in 4 inch, 6 inch, 8 inch, 10 inch, and 12 inch sizes, each built from the same investment cast 316 stainless steel with the same open-base, four-bolt mounting style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this open base cleat and the Sea-Dog Smart Cleat?\u003c\/strong\u003e The 041605-1 open base cleat has a plain classic horn shape, while the Sea-Dog Smart Cleat adds a knob end on the horn to help prevent lines from slipping off; both are investment cast 316 stainless steel and mount with an open base four-bolt pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used for both dock lines and fenders?\u003c\/strong\u003e Yes, the open horn design of the 041605-1 cleat is intended for general line tie-off, including dock lines, mooring lines, and fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the finish on this cleat polished?\u003c\/strong\u003e The 041605-1 cleat is produced by investment casting, which yields a smooth, uniform stainless steel surface finish.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543975643,"sku":"S-D-041605-1","price":26.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3964_a59dffdd-3618-417d-909c-fa4b2f1fb952.jpg?v=1784421736"},{"product_id":"sea-dog-041666-1-smart-cleat-6-1-4-stud-mount-investment-cast-316-stainless-steel","title":"Sea-Dog Smart Cleat 6-1\/4 Inch Stud Mount 316 Stainless Steel Boat Cleat","description":"\u003cp\u003eThe Sea-Dog Smart Cleat (part number 041666-1) is a stud mount cleat built for clean, secure line tie-off on boats, docks, and marine hardware installations. Constructed of investment cast 316 stainless steel, it resists corrosion from saltwater and marine exposure while holding its polished finish over time. The knob-end design keeps lines from slipping off the horns, reducing the risk of lines working loose and minimizing the potential for collision injuries when moving around deck.\u003c\/p\u003e\u003cp\u003eUnlike traditional through-bolt cleats, the Smart Cleat uses hidden stud mount fasteners, so there are no exposed nuts or bolts on the mounting surface to collect water, dirt, or debris. Installation only requires two standard-size bit holes drilled for the studs, with no cutouts or hole saws needed, making it a straightforward upgrade or replacement for an existing cleat base. The studs measure 1\/4 inch by 1-1\/2 inches with 1\/4-20 NC threads, and the cleat ships complete with stainless steel washers and nuts for a full, ready-to-install package.\u003c\/p\u003e\u003cp\u003eAt 6-1\/4 inches long, this cleat suits a wide range of cleating applications where a compact, classic-style tie-off point is needed. Its investment cast construction gives it a solid, one-piece feel that stands up to repeated line loading over years of use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041666-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Stud Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 6-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-9\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 1\/4 inch x 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Thread:\u003c\/strong\u003e 1\/4-20 NC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.62 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041768\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Stainless steel washers and nuts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 041666-1 Smart Cleat made of?\u003c\/strong\u003e It is made of investment cast 316 stainless steel, which resists corrosion in saltwater and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog Smart Cleat 041666-1 mounted?\u003c\/strong\u003e This cleat uses a stud mount design with hidden fasteners. Two standard-size bit holes are drilled for the 1\/4 inch by 1-1\/2 inch studs, and no cutouts or hole saws are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 041666-1 cleat come with mounting hardware?\u003c\/strong\u003e Yes, the Sea-Dog Smart Cleat 041666-1 includes stainless steel washers and nuts along with the studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog Smart Cleat 041666-1?\u003c\/strong\u003e The overall length is 6-1\/4 inches, with a base width of 2 inches and a height dimension of 1-9\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size are the mounting studs on this cleat?\u003c\/strong\u003e The studs are 1\/4 inch by 1-1\/2 inches with 1\/4-20 NC threads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 041666-1 cleat weigh?\u003c\/strong\u003e It weighs 0.62 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are there no visible bolts on top of this cleat?\u003c\/strong\u003e The Sea-Dog Smart Cleat 041666-1 uses a stud mount system where the fasteners are hidden beneath the mounting surface, so there are no exposed nuts or bolts on top to collect water or debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Stud Mount Smart Cleat (041666-1) and a standard stud mount cleat?\u003c\/strong\u003e The 041666-1 Smart Cleat has a knob end that helps prevent lines from slipping off and reduces the chance of collision injuries, a feature not described on Sea-Dog's standard stud mount cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 041666-1 cleat genuine Sea-Dog hardware?\u003c\/strong\u003e Yes, it is a genuine Sea-Dog product identified by part number 041666-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat rust or corrode over time?\u003c\/strong\u003e The investment cast 316 stainless steel construction of the 041666-1 cleat is corrosion resistant, making it suitable for ongoing marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the Sea-Dog Smart Cleat 041666-1?\u003c\/strong\u003e Each unit includes the cast 316 stainless steel cleat body along with its mounting studs, stainless steel washers, and nuts.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544008411,"sku":"S-D-041666-1","price":44.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7315.jpg?v=1784421748"},{"product_id":"sea-dog-043040-1-open-base-cleat-4-inch-black-injection-molded-nylon-dock-cleat","title":"Sea-Dog Open Base Cleat, 4 Inch Black Nylon Boat Cleat with #8 Fastener Holes","description":"\u003cp\u003eThe Sea-Dog Open Base Cleat (043040-1) is a 4 inch black nylon dock cleat designed for securing dock lines, mooring lines, and fenders on boats and docks. It is built from injection molded nylon that resists corrosion and UV degradation, making it suitable for long-term exposure to sun, saltwater, and freshwater environments. The defining feature of this cleat is its open base with a molded-in recess that traps sealant in place during installation, creating a more watertight seal around the mounting fasteners and helping prevent water intrusion into the deck or hull core.\u003c\/p\u003e\u003cp\u003eThis cleat measures 4 inches in overall length with a height of 7\/8 inch, giving it a compact footprint suitable for smaller boats, docks, kayaks, canoes, and utility applications where a full-size bow or stern cleat is not needed. It installs using two flat head fasteners sized for a #8 screw (fasteners are not included and must be purchased separately). The cleat is finished in black to blend with dark trim, rails, and non-skid surfaces. It ships as a single cleat, and Sea-Dog also offers this same open base cleat design in additional sizes for larger line diameters and heavier-duty applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 043040-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #8 Flat Head (fasteners not included, 2 required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.088 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514043090\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 043040-1 open base cleat?\u003c\/strong\u003e The Sea-Dog 043040-1 open base cleat measures 4 inches in overall length and 7\/8 inch in height, making it a compact cleat suited to smaller boats and dock applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e This cleat is made from injection molded nylon that resists corrosion and UV damage, which is why Sea-Dog uses it for the 043040-1 open base cleat rather than metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'open base' mean on this cleat?\u003c\/strong\u003e Open base refers to a molded-in recess in the base of the 043040-1 cleat that traps sealant in place during mounting, giving a more watertight seal around the fastener holes than a flat-base cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners does the 043040-1 cleat require?\u003c\/strong\u003e Two #8 flat head fasteners are needed to install the Sea-Dog 043040-1 cleat; fasteners are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat sold as a single piece or a pair?\u003c\/strong\u003e The 043040-1 is sold as a single black cleat, though it is packed in standard quantities of 10 pieces at the distributor level.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sea-Dog make this cleat in white?\u003c\/strong\u003e Yes, Sea-Dog produces this same 4 inch open base cleat design in white as a separate part number in addition to the black 043040-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cleat weigh?\u003c\/strong\u003e The Sea-Dog 043040-1 open base cleat weighs 0.088 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this cleat used for?\u003c\/strong\u003e The 043040-1 is used to secure dock lines, mooring lines, and fenders on boats, docks, kayaks, and other small watercraft or dock structures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat UV and saltwater resistant?\u003c\/strong\u003e Yes, the nylon construction of the 043040-1 open base cleat is corrosion and UV resistant, making it suitable for continuous exposure to sun and marine water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sea-Dog offer larger versions of this same cleat?\u003c\/strong\u003e Yes, the open base cleat design used for the 4 inch 043040-1 is also available from Sea-Dog in other lengths for applications needing a larger cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 043040-1 cleat?\u003c\/strong\u003e The UPC for the Sea-Dog 043040-1 black 4 inch open base cleat is 035514043090.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544041179,"sku":"S-D-043040-1","price":4.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7471.jpg?v=1784421759"},{"product_id":"sea-dog-043340-1-heavy-duty-cleat-4-1-4-black-nylon-tie-down-cleat-pair","title":"Sea-Dog Heavy Duty Nylon Cleat, 4-1\/4 Inch, Black, Pack of 2","description":"\u003cp\u003eThe Sea-Dog Heavy Duty Cleat is an injection molded nylon tie-down cleat built for securing dock lines, fender lines, flag halyards, canvas tie-downs, and other related accessories aboard a boat. Constructed of UV resistant and corrosion resistant injection molded nylon, this cleat is designed to hold up to sun, salt spray, and repeated use without cracking or fading the way many lower-grade plastics do. The cleat measures 4-1\/4 inches and features flared posts that add strength and stability when lines are cinched down under load, making it a dependable choice for everyday cleating tasks around the deck, rail, or dock.\u003c\/p\u003e\u003cp\u003eThis cleat is sold as a pack of two and finished in black. It is designed for easy installation on flat mounting surfaces; fasteners are not included, so screws or bolts sized for the mounting holes should be purchased separately based on the mounting surface. Because it is molded entirely from nylon rather than metal, it will not corrode, rust, or leave stains on gelcoat or fiberglass, making it a popular upgrade or replacement for boats, docks, and canvas covers where a lightweight, low-maintenance cleat is preferred over stainless steel or chrome-plated bronze hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 043340-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 4-1\/4 Inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514043052\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 043340-1 cleat?\u003c\/strong\u003e The Sea-Dog 043340-1 heavy duty cleat measures 4-1\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made of?\u003c\/strong\u003e Sea-Dog part 043340-1 is made of injection molded nylon that resists UV exposure and corrosion, so it will not rust or stain gelcoat the way metal hardware can.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cleats come in a package?\u003c\/strong\u003e The 043340-1 cleat is sold as a pack of two.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting screws included with this cleat?\u003c\/strong\u003e No, fasteners are not included with the Sea-Dog 043340-1 cleat, so screws or bolts should be sourced separately to match the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog 043340-1 cleat?\u003c\/strong\u003e This cleat is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this cleat typically used for?\u003c\/strong\u003e It is used for tying down fenders, flag halyards, canvas covers, and similar dock or boat accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does one package weigh?\u003c\/strong\u003e The Sea-Dog 043340-1 cleat weighs 0.15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this nylon cleat corrode like a metal cleat?\u003c\/strong\u003e No. Because the 043340-1 cleat is injection molded nylon rather than metal, it will not corrode or rust in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat easy to install?\u003c\/strong\u003e Yes, the Sea-Dog 043340-1 cleat is designed for durable, easy installation on a flat mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a nylon cleat over a stainless steel one?\u003c\/strong\u003e A nylon cleat like the Sea-Dog 043340-1 is lighter than stainless steel, will not scratch gelcoat or fiberglass, and resists UV and corrosion without the higher cost of stainless hardware.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544073947,"sku":"S-D-043340-1","price":7.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4646.jpg?v=1784421772"},{"product_id":"sea-dog-043050-1-open-base-nylon-cleat-5-inch-black-pair-corrosion-uv-resistant-dock-cleat","title":"Sea-Dog Open Base Cleat 5 Inch, Black Nylon, Sold as a Pair","description":"\u003cp\u003eThe Sea-Dog 043050-1 Open Base Cleat is a 5 inch black nylon cleat designed for securing dock lines and mooring lines on boats and docks. It is built with a molded-in recess in the base that traps sealant in place during installation, creating a more watertight seal around the mounting fasteners and helping to prevent water intrusion into the deck or dock surface below. The cleat is constructed of durable injection molded nylon that resists corrosion and UV degradation, making it a long-lasting choice for constant exposure to sun, salt water, and moisture.\u003c\/p\u003e\u003cp\u003eThis open base design mounts with two flat head fasteners (not included) sized for a #10 screw. The cleat measures 5 inches in overall length with a height of 1-1\/16 inches. It is sold as a matched pair, with two cleats included per package. This 5 inch size is part of the Sea-Dog open base cleat lineup, which also includes smaller 3 inch and 4 inch sizes, and this same 5 inch cleat is also offered in white under a separate part number for buyers who want to match different deck or hull colors.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 043050-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 flat head (fasteners not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.152 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Sold as a pair (2 cleats per package)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514043106\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 043050-1 open base cleat?\u003c\/strong\u003e The Sea-Dog 043050-1 open base cleat measures 5 inches in overall length and 1-1\/16 inches in height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this cleat come in?\u003c\/strong\u003e The 043050-1 cleat is black. Sea-Dog also offers this same 5 inch open base cleat in white under a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cleat made of?\u003c\/strong\u003e It is made of injection molded nylon that resists corrosion and UV degradation, suited to ongoing marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with this cleat?\u003c\/strong\u003e No. The Sea-Dog 043050-1 cleat is designed for #10 flat head fasteners, which are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cleats are included in one package?\u003c\/strong\u003e This listing is sold as a matched pair, with two 043050-1 cleats included per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the recess in the base of the cleat do?\u003c\/strong\u003e The molded-in recess in the base of the 043050-1 cleat traps sealant in place during installation, helping create a more watertight seal at the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog open base cleat weigh?\u003c\/strong\u003e The Sea-Dog 043050-1 open base cleat weighs 0.152 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener size does the 043050-1 cleat use?\u003c\/strong\u003e It is designed to mount with #10 flat head fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat an open base or closed base design?\u003c\/strong\u003e The 043050-1 is an open base cleat, meaning the underside of the base is open with a recessed area to hold sealant rather than a fully enclosed base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 5 inch cleat compare to Sea-Dog's smaller open base cleats?\u003c\/strong\u003e The 5 inch 043050-1 is larger than Sea-Dog's 3 inch (043030-1) and 4 inch (043040-1) open base cleats and uses a larger #10 flat head fastener, compared to the #6 fastener on the 3 inch cleat and the #8 fastener on the 4 inch cleat.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544106715,"sku":"S-D-043050-1","price":5.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7471_01387ead-a0a9-438a-85ca-b705ab411390.jpg?v=1784421776"},{"product_id":"sea-dog-043065-1-open-base-nylon-cleat-6-1-2-in-black-sealant-trapping-molded-recess-base","title":"Sea-Dog Open Base Nylon Cleat, 6-1\/2 Inch, Black, Part 043065-1","description":"\u003cp\u003eThe Sea-Dog 043065-1 is a 6-1\/2 inch open base nylon cleat built for securing dock and mooring lines on boats and docks. It is molded from durable, corrosion and UV resistant injection molded nylon, making it a long-lasting alternative to metal cleats in the marine environment. The base of the cleat has a molded-in recess that traps sealant in place during installation, creating a more watertight seal at the mounting surface and helping prevent water intrusion into the deck or dock core below.\u003c\/p\u003e\u003cp\u003eThis cleat installs with two flat head fasteners sized for a #12 screw (fasteners are not included), and is finished in black to blend with dark deck hardware and trim. Its open base design leaves the underside of the horns clear, which some installers use with an optional rub plate for added line protection at the base. The 043065-1 is part of the Sea-Dog Open Base Cleat line, which is also offered in additional sizes and in white for the 5 inch size.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 043065-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection molded nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 6-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional Dimensions (per manufacturer spec sheet):\u003c\/strong\u003e 1-3\/8 inches x 1-11\/16 inches x 2-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #12 flat head (fasteners not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.166 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514043113\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal mount for boat decks and docks; not engine or model specific.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 043065-1 cleat?\u003c\/strong\u003e The 043065-1 has an overall length of 6-1\/2 inches, making it the mid-large size in the Sea-Dog Open Base Cleat lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e It is molded from injection molded nylon that resists corrosion and UV degradation, so it will not rust like metal deck hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 043065-1 cleat come in colors other than black?\u003c\/strong\u003e This part number is black; the Open Base Cleat series is also offered in white at the 5 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes an open base cleat different from a standard cleat?\u003c\/strong\u003e The Sea-Dog Open Base Cleat has a molded-in recess in its base that traps sealant in place during installation, giving a more watertight seal than a flat-base cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners does the 043065-1 cleat need?\u003c\/strong\u003e It mounts with two flat head fasteners sized for a #12 screw; fasteners are not included with the cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 043065-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog 043065-1 open base cleat weighs 0.166 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cleats come in a package?\u003c\/strong\u003e The 043065-1 is packed 10 each per case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a backing plate needed for this cleat?\u003c\/strong\u003e A backing plate is shown as an option for the Sea-Dog Open Base Cleat installation to reinforce the mounting surface, and a rub plate is also available as an optional accessory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 043065-1 cleat be used on a dock as well as a boat?\u003c\/strong\u003e Yes, the Sea-Dog open base nylon cleat is suited for both boat deck and dock mounting since it is a universal mounting cleat rather than a model-specific part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat hold up in saltwater conditions?\u003c\/strong\u003e Its injection molded nylon construction is corrosion and UV resistant, which suits the 043065-1 for saltwater and sun exposure on deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 043065-1 cleat?\u003c\/strong\u003e The UPC for the Sea-Dog Open Base Nylon Cleat, part 043065-1, is 035514043113.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544139483,"sku":"S-D-043065-1","price":7.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7471_a035ddd1-1dc8-42ef-8ec5-773549521720.jpg?v=1784421780"},{"product_id":"sea-dog-043540-1-zig-zag-cleat-injection-molded-nylon-fits-line-up-to-3-8-in-kayak-canoe-small-boat-cleat","title":"Sea-Dog 043540-1 Zig Zag Cleat - 3-1\/2 Inch Nylon Line Cleat for Kayaks and Canoes","description":"\u003cp\u003eThe Sea-Dog 043540-1 Zig Zag Cleat is a primary tie-off point built for kayaks, canoes, and other small vessels. Instead of tying knots, the operator simply weaves the line back and forth around the cleat's arms in a zig-zag pattern, a cross-functional lace-back design that makes single-handed tie-offs fast and secure. It is well suited for adjusting and securing anchor lines, mooring lines, fender lines, and utility or trailer cover lines, and accepts line up to 3\/8 inch in diameter.\u003c\/p\u003e\u003cp\u003eThe cleat is constructed of injection molded nylon that is corrosion resistant and UV stabilized, so it holds up to sun and saltwater exposure without rusting or becoming brittle. It measures 3-1\/2 inches in overall length (A), 15\/16 inch (B), 1-15\/16 inches (C), and 1-3\/4 inches at the base (D). Installation is straightforward: the cleat mounts with two 1\/4 inch flat head fasteners, which are not included, through its molded mounting holes. Its compact, lightweight design makes it a practical upgrade over traditional horn cleats on small boats where deck space and weight are at a premium.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 043540-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 3-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 15\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width (D):\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 1\/4 inch FH (flat head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Line Size:\u003c\/strong\u003e Up to 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.218 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514043304\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 043540-1 Zig Zag Cleat used for?\u003c\/strong\u003e It serves as a primary tie-off cleat on kayaks, canoes, and other small vessels, used for securing anchor lines, mooring lines, fender lines, and utility or trailer cover lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you tie a line to the Zig Zag Cleat?\u003c\/strong\u003e No knots are needed. The line is simply woven back and forth around the arms of the 043540-1 cleat in a zig-zag pattern, and its lace-back design allows for quick single-handed tie-offs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size line does the 043540-1 cleat accept?\u003c\/strong\u003e The Sea-Dog Zig Zag Cleat fits line up to 3\/8 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Zig Zag Cleat made of?\u003c\/strong\u003e It is made of injection molded nylon that is corrosion resistant and UV stabilized, so the 043540-1 cleat resists rust and sun degradation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 043540-1 cleat?\u003c\/strong\u003e The cleat measures 3-1\/2 inches (A) in overall length, 15\/16 inch (B), 1-15\/16 inches (C), and 1-3\/4 inches (D) at the base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Zig Zag Cleat weigh?\u003c\/strong\u003e The Sea-Dog 043540-1 Zig Zag Cleat weighs 0.218 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with the 043540-1 cleat?\u003c\/strong\u003e No, fasteners are not included. The cleat is designed to install with two 1\/4 inch flat head (FH) fasteners that the installer supplies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog Zig Zag Cleat?\u003c\/strong\u003e The 043540-1 Zig Zag Cleat is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 043540-1 different from Sea-Dog's other Zig Zag Cleat sizes?\u003c\/strong\u003e Yes, 043540-1 is the 3-1\/2 inch version identified by dimensions A through D of 3-1\/2 inches, 15\/16 inch, 1-15\/16 inches, and 1-3\/4 inches; ordering by this exact part number ensures you get this size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Zig Zag Cleat be used in place of a traditional horn cleat?\u003c\/strong\u003e Yes, the Sea-Dog 043540-1 works as a compact alternative to a horn-style cleat, using its zig-zag arm design instead of a knotted hitch to hold the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 043540-1 Zig Zag Cleat?\u003c\/strong\u003e The UPC for this cleat is 035514043304.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544270555,"sku":"S-D-043540-1","price":5.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7052.jpg?v=1784421813"},{"product_id":"sea-dog-044104-1-four-hole-hollow-base-cleat-4-1-2-in-chrome-plated-zinc-boat-dock-cleat","title":"Sea-Dog 4-1\/2 Inch Four-Hole Hollow Cleat, Chrome Plated Zinc, 044104-1","description":"\u003cp\u003eThe Sea-Dog 044104-1 is a 4-1\/2 inch four-hole hollow cleat built from die cast zinc with a chrome plated finish. It is designed as an economical mooring and docking cleat for freshwater applications, giving boat owners a simple, low-cost way to secure dock lines, fenders, and mooring ropes.\u003c\/p\u003e\u003cp\u003eThe cleat features an open (hollow) base rather than a solid casting, which reduces material and keeps the part lightweight while still providing a durable line-holding surface for everyday freshwater use. It surface mounts using four #8 flat head fasteners, which are not included and must be purchased separately. The overall length is 4-1\/2 inches with a 1-3\/4 inch base, making it a compact size suited to smaller boats, dinghies, docks, and similar applications where a full-size cleat is not needed.\u003c\/p\u003e\u003cp\u003eSea-Dog also offers a larger 6 inch version of this same four-hole hollow cleat design (044106-1) as a separate part for boats that need a bigger cleat and heavier #10 fasteners, so buyers should confirm which length fits their vessel before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 044104-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 4-Hole Cleat, Hollow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die cast zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Style:\u003c\/strong\u003e Open\/hollow base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 4-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Length:\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface mount, 4-hole pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #8 flat head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514044011\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal surface-mount cleat; not vessel or engine specific.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 044104-1 cleat?\u003c\/strong\u003e The 044104-1 has an overall length of 4-1\/2 inches with a 1-3\/4 inch base, making it a compact cleat suited to smaller boats and docks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 044104-1 cleat made of?\u003c\/strong\u003e It is made of die cast zinc with a chrome plated finish, giving it a durable, corrosion-resistant surface for freshwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat a solid or open base design?\u003c\/strong\u003e The 044104-1 uses an open, hollow base rather than a solid casting, which keeps the part lightweight while still providing a secure line-holding surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog 044104-1 cleat mounted?\u003c\/strong\u003e This cleat surface mounts using four #8 flat head fasteners; the fasteners are not included and need to be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 044104-1 fit a specific boat make or model?\u003c\/strong\u003e No, the 044104-1 is a universal surface-mount cleat and is not tied to a specific boat make, model, or engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 044104-1 and the Sea-Dog 6 inch cleat?\u003c\/strong\u003e The 044104-1 is the 4-1\/2 inch version of Sea-Dog's four-hole hollow cleat; Sea-Dog also makes a larger 6 inch version, part number 044106-1, sold separately for boats needing a bigger cleat and #10 fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 044104-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog 044104-1 cleat weighs 0.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 044104-1 cleat recommended for saltwater use?\u003c\/strong\u003e The 044104-1 is described as an economical choice intended for freshwater applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with the 044104-1 cleat?\u003c\/strong\u003e No, mounting fasteners are not included with the 044104-1; it requires four #8 flat head fasteners supplied separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 044104-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, 044104-1 is the manufacturer part number for this genuine Sea-Dog four-hole hollow cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounting holes does the 044104-1 cleat have?\u003c\/strong\u003e The 044104-1 is a four-hole cleat, mounting to the surface with four fastener holes.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544303323,"sku":"S-D-044104-1","price":8.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7473.jpg?v=1784421820"},{"product_id":"sea-dog-044106-1-four-hole-hollow-base-cleat-6-chrome-plated-zinc-boat-dock-cleat","title":"Sea-Dog 4-Hole Hollow Base Cleat, 6 Inch, Die Cast Chrome Plated Zinc","description":"\u003cp\u003eThe Sea-Dog 044106-1 is a 6 inch open\/hollow base cleat built for securing dock lines on freshwater boats, pontoons, and small craft. It is constructed of die cast zinc with a chrome plated finish, giving it a bright, corrosion-resistant surface that holds up to regular exposure at the dock. The open base design is an economical choice for freshwater applications where a fully enclosed cleat base is not required.\u003c\/p\u003e\u003cp\u003eThis cleat surface mounts using four fastener holes and accepts #10 flat head fasteners (fasteners not included), making it straightforward to install on a deck, dock, or gunwale. The 6 inch overall length places it in the mid-size range of Sea-Dog's hollow base cleat lineup, with a 2-3\/16 inch base width to match. Sea-Dog is a long-running, family owned marine hardware brand, and the 044106-1 reflects that same die cast build quality found across its cleat and chock line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 044106-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 4-Hole Hollow (Open) Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die cast zinc, chrome plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width:\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional Dimension:\u003c\/strong\u003e 1-9\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 flat head (fasteners not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface mount, 4-hole base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.47 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eIntended for freshwater applications; no specific boat make, model, or engine fitment is specified for this cleat.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 044106-1 cleat?\u003c\/strong\u003e The Sea-Dog 044106-1 measures 6 inches overall in length, with a base width of 2-3\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 044106-1 cleat made of?\u003c\/strong\u003e It is made of die cast zinc with a chrome plated finish, which resists corrosion in freshwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat rated for saltwater use?\u003c\/strong\u003e The Sea-Dog 044106-1 is described as an economical choice for freshwater applications; it is not marketed as a saltwater-rated cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners does the 044106-1 cleat use?\u003c\/strong\u003e This cleat mounts with four #10 flat head fasteners, which are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounting holes does this cleat have?\u003c\/strong\u003e The 044106-1 is a 4-hole cleat, meaning it surface mounts using four fastener holes through its open base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'hollow base' mean on this cleat?\u003c\/strong\u003e Hollow base (also called open base) means the underside of the cleat is not solid, which is a common, more economical construction used on the Sea-Dog 044106-1 for freshwater applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 044106-1 weigh?\u003c\/strong\u003e The Sea-Dog 044106-1 cleat weighs 0.47 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 044106-1 cleat come with mounting hardware?\u003c\/strong\u003e No, the four #10 flat head fasteners needed for installation are not included with the Sea-Dog 044106-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 044106-1 and the smaller 044104-1 cleat?\u003c\/strong\u003e The 044106-1 is the 6 inch version of Sea-Dog's hollow base cleat line, while the 044104-1 is the smaller 4-1\/2 inch version; both share the same die cast chrome plated zinc construction and #8 or #10 flat head fastener mounting, but differ in overall length and base dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 044106-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, the 044106-1 is a genuine Sea-Dog manufactured cleat, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the finish on this cleat?\u003c\/strong\u003e The Sea-Dog 044106-1 has a chrome plated finish over its die cast zinc body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used on a dock as well as a boat?\u003c\/strong\u003e Yes, the 044106-1 surface mounts with four fasteners and is suitable for dock or boat deck installation in freshwater settings.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544368859,"sku":"S-D-044106-1","price":10.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7473_22000552-6491-4f25-b88d-d07c67764279.jpg?v=1784421822"},{"product_id":"sea-dog-046104-1-closed-base-flat-head-cleat-4-die-cast-aluminum-for-aluminum-docks-boats","title":"Sea-Dog Closed Base Cleat, 4 Inch Flat Head Die Cast Aluminum Dock Cleat","description":"\u003cp\u003eThe Sea-Dog Closed Base Cleat (046104-1) is a 4 inch flat head dock cleat built from die cast aluminum for durable, corrosion-resistant service on boats and docks. Its closed base design features a large footprint that spreads load evenly across the mounting surface, making it well suited for securing dock lines, fenders, and mooring lines under repeated strain. Sea-Dog designed this cleat specifically for use on aluminum docks, vessels, and other aluminum surfaces, giving it a matched material profile that reduces the risk of galvanic corrosion common when dissimilar metals are paired together in a marine environment.\u003c\/p\u003e\u003cp\u003eThe cleat measures 4 inches in overall length (A), with a base width of 1 inch (B), a base height of 13\/16 inch (C), and an overall height of 1-5\/8 inches (D). It installs with two #10 flat head fasteners, which are not included, allowing the fastener heads to sit flush with the cleat surface for a clean, low-profile finish. At 0.108 pounds, it is a lightweight, compact hardware piece intended for smaller lines and general-purpose docking and tie-down use rather than heavy commercial mooring loads.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 046104-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Closed Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength (A):\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width (B):\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Height (C):\u003c\/strong\u003e 13\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height (D):\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.108 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514046121\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Surface:\u003c\/strong\u003e Aluminum docks and vessels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for use on aluminum docks, vessels, or other aluminum surfaces.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 046104-1 closed base cleat?\u003c\/strong\u003e The Sea-Dog 046104-1 measures 4 inches in overall length, with a base width of 1 inch, a base height of 13\/16 inch, and an overall height of 1-5\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e It is constructed of die cast aluminum, matching the material of the aluminum docks and vessels it is designed to be installed on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 046104-1 cleat come with mounting hardware?\u003c\/strong\u003e No, fasteners are not included. The cleat installs with two #10 flat head fasteners that must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is this cleat designed for?\u003c\/strong\u003e Sea-Dog designed the 046104-1 closed base cleat for use on aluminum docks, vessels, or other aluminum surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cleat weigh?\u003c\/strong\u003e The Sea-Dog 046104-1 closed base cleat weighs 0.108 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'closed base' mean on this cleat?\u003c\/strong\u003e A closed base cleat has a solid, enclosed base rather than an open cutout, which gives it a large footprint that distributes line loads evenly across the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this cleat use flat head fasteners?\u003c\/strong\u003e The flat head design of the 046104-1 lets fastener heads sit flush with the cleat surface for a clean, low-profile finish rather than protruding above it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 046104-1 cleat corrosion resistant?\u003c\/strong\u003e Yes, it is die cast aluminum, which resists corrosion and is specifically suited to pairing with aluminum dock and vessel surfaces to avoid galvanic corrosion issues.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 4 inch and 5 inch versions of this cleat?\u003c\/strong\u003e The 4 inch Sea-Dog closed base cleat (046104-1) has smaller overall dimensions and uses a #10 fastener, while the larger 5 inch and 6 inch versions in the same closed base flat head line use 1\/4 inch fasteners and have larger base dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used for mooring larger boats?\u003c\/strong\u003e The 046104-1 is a compact 4 inch cleat best suited to lighter-duty dock line, fender, and tie-down use rather than heavy mooring loads.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544401627,"sku":"S-D-046104-1","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7477.jpg?v=1784421828"},{"product_id":"sea-dog-046105-1-closed-base-cleat-5-in-flat-head-die-cast-aluminum-dock-cleat","title":"Sea-Dog Open Base Cleat, Flat Head, 5 Inch Die Cast Aluminum, 046105-1","description":"\u003cp\u003eThe Sea-Dog Open Base Cleat, part number 046105-1, is a 5 inch flat head dock and deck cleat built from die cast aluminum. It features a large base designed to distribute mooring and docking loads evenly, reducing stress on the mounting surface. The cleat is designed for use on aluminum docks, vessels, or other aluminum surfaces, making it a practical choice for boaters and dock builders who want a mounting-surface-matched hardware set. Installation is straightforward: the cleat mounts with two flat head (FH) fasteners sized for a 1\/4 inch flat head fastener; fasteners are not included and must be sourced separately. Its die cast aluminum construction provides a rigid, corrosion-resistant cleat body suited to marine environments. At 5 inches overall, the 046105-1 sits in the middle of the Sea-Dog open base flat head cleat lineup, offering a size between the smaller 4 inch (046104-1) and larger 6 inch (046106-1) versions for boaters who need to match cleat size to line diameter and mounting space. Each unit weighs 0.152 pounds. This cleat is sold and packed for retail in standard packs of 10 each at the manufacturer level, with each individual cleat available as its own purchasable unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 046105-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Open Base Cleat, Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 1\/4 inch Flat Head (FH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Included:\u003c\/strong\u003e No, two FH fasteners required (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.152 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514046138\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Cleats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 046105-1 cleat made of?\u003c\/strong\u003e The 046105-1 open base cleat is constructed of die cast aluminum for a rigid, corrosion-resistant cleat body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this cleat?\u003c\/strong\u003e The 046105-1 measures 5 inches overall, with a base footprint of 1-1\/16 inches by 1-1\/16 inches and a height of 1-15\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo fasteners come with the 046105-1 cleat?\u003c\/strong\u003e No. The cleat installs with two flat head (FH) fasteners sized to 1\/4 inch, but the fasteners are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is this cleat designed for?\u003c\/strong\u003e The 046105-1 is designed for use on aluminum docks, vessels, or other aluminum surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 046105-1 cleat weigh?\u003c\/strong\u003e Each Sea-Dog 046105-1 open base cleat weighs 0.152 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 046104-1, 046105-1, and 046106-1 cleats?\u003c\/strong\u003e These are the same open base, flat head, die cast aluminum cleat design in three sizes: the 046104-1 is 4 inches, the 046105-1 is 5 inches, and the 046106-1 is 6 inches overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this cleat have a large base?\u003c\/strong\u003e The 046105-1 has a large base designed to distribute mooring and docking loads evenly across the mounting surface, reducing stress at the attachment points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 046105-1 a closed base or open base cleat?\u003c\/strong\u003e The 046105-1 is an open base flat head cleat in the Sea-Dog cleat lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener type does the 046105-1 use?\u003c\/strong\u003e It uses a 1\/4 inch flat head (FH) fastener, with two fasteners needed per cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog 046105-1 cleat sold?\u003c\/strong\u003e The 046105-1 is manufactured and cataloged in standard packs of 10 each, with individual units available for purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 046105-1 cleat corrode in a marine environment?\u003c\/strong\u003e The die cast aluminum construction of the 046105-1 is built to hold up in marine environments, particularly when mounted on aluminum docks or vessels.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544467163,"sku":"S-D-046105-1","price":5.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7477_a3509656-9c00-496c-bfcd-8b37fe01228c.jpg?v=1784421849"},{"product_id":"sea-dog-046106-1-flat-head-closed-base-cleat-6-in-die-cast-aluminum-for-aluminum-docks-and-boats","title":"Sea-Dog 6 Inch Flat Head Closed Base Cleat, Die Cast Aluminum, 046106-1","description":"\u003cp\u003eThis Sea-Dog 046106-1 cleat is a 6 inch flat head closed base cleat built from die cast aluminum. It is designed for use on aluminum docks, vessels, or other aluminum surfaces, and features a large base that distributes mooring and load stress evenly across the mounting surface rather than concentrating it at the fasteners. The closed base design gives the cleat a solid, finished look while the flat head profile keeps the mounting screws countersunk and flush with the base for a clean installation.\u003c\/p\u003e\u003cp\u003eThe cleat installs with two flat head fasteners (not included), so buyers should have appropriate hardware on hand sized to match the base before installation. It is sold individually and is part of Sea-Dog's line of die cast aluminum flat head closed base cleats, which is also offered in 4 inch and 5 inch sizes for smaller or larger mounting applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 046106-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Flat Head Closed Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimension B:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimension C:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimension D:\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e 1\/4 inch flat head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Two flat head fasteners required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.226 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514046015\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 046106-1 cleat?\u003c\/strong\u003e The Sea-Dog 046106-1 is a 6 inch flat head closed base cleat, measuring 6 inches overall with a base measuring 1-3\/8 inches by 1-3\/8 inches and an overall height of 2-3\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made of?\u003c\/strong\u003e This cleat is constructed of die cast aluminum, making the Sea-Dog 046106-1 suitable for use on aluminum docks, vessels, or other aluminum surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 046106-1 cleat come with mounting hardware?\u003c\/strong\u003e No, fasteners are not included. The Sea-Dog 046106-1 installs with two 1\/4 inch flat head fasteners that must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an open base or closed base cleat?\u003c\/strong\u003e The Sea-Dog 046106-1 is a closed base cleat, giving it a solid base profile rather than an open cutout design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'flat head' mean for this cleat?\u003c\/strong\u003e Flat head refers to the countersunk fastener style used to mount the cleat, allowing the mounting screws on the Sea-Dog 046106-1 to sit flush with the base surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 046106-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog 046106-1 weighs 0.226 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 046106-1 sold as a single cleat or a pair?\u003c\/strong\u003e It is sold individually as one cleat, part number 046106-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is this cleat designed for?\u003c\/strong\u003e The 046106-1 is designed for use on aluminum docks, vessels, or other aluminum surfaces, where its large closed base distributes mooring loads evenly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre smaller or larger sizes of this cleat available?\u003c\/strong\u003e Yes, Sea-Dog also offers this flat head closed base cleat design in 4 inch and 5 inch sizes in addition to the 6 inch 046106-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 046106-1 cleat?\u003c\/strong\u003e The UPC for the Sea-Dog 046106-1 6 inch cleat is 035514046015.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the cleat have a large base?\u003c\/strong\u003e The large base on the Sea-Dog 046106-1 is designed to distribute mooring and load stress evenly across the mounting surface, reducing strain on individual fasteners.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544499931,"sku":"S-D-046106-1","price":7.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7477_3aa329ed-44c4-47f6-8f07-61cddc056d1c.jpg?v=1784421858"},{"product_id":"sea-dog-046108-1-flat-head-open-base-cleat-8-inch-die-cast-aluminum-dock-cleat","title":"Sea-Dog 046108-1 Flat Head Open Base Cleat, 8 Inch, Die Cast Aluminum","description":"\u003cp\u003eThe Sea-Dog 046108-1 is an 8 inch Flat Head Open Base Cleat built for securing dock lines on aluminum docks, vessels, and other aluminum surfaces. It is constructed of die cast aluminum for corrosion resistance and long-term durability in a marine environment. The open base design features a large footprint that spreads mooring and docking loads evenly across the mounting surface, reducing stress on the fasteners and the surface itself rather than concentrating it at a single point.\u003c\/p\u003e\u003cp\u003eThis cleat mounts with two flat head (FH) fasteners, which are not included, allowing the fastener heads to sit flush for a clean, low-profile installation. The base measures 1-1\/2 inches wide, and the cleat has an 8 inch overall length, making it suited for smaller to mid-size cleat applications where a compact, flush-mount hardware piece is needed. Each unit is sold individually.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 046108-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions (A x B x C x D):\u003c\/strong\u003e 8 inches x 1-7\/8 inches x 1-1\/2 inches x 2-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e 1\/4 inch Flat Head (FH), not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.346 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Package Quantity:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514046022\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 8.75 x 7.13 x 2.88 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 046108-1 cleat made from?\u003c\/strong\u003e The Sea-Dog 046108-1 Flat Head Open Base Cleat is made of die cast aluminum, chosen for its corrosion resistance in marine settings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this cleat?\u003c\/strong\u003e The 046108-1 has an 8 inch overall length, with a base width of 1-1\/2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners does the 046108-1 cleat require?\u003c\/strong\u003e It installs with two 1\/4 inch flat head (FH) fasteners, which are not included with the cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat sold as a single unit or a pair?\u003c\/strong\u003e The Sea-Dog 046108-1 is sold individually, one cleat per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is the 046108-1 designed for?\u003c\/strong\u003e It is designed for mounting on aluminum docks, vessels, or other aluminum surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this cleat have an open base design?\u003c\/strong\u003e The open base on the 046108-1 features a large footprint that spreads mooring and docking loads evenly, reducing stress on the fasteners and mounting surface compared to a smaller base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 046108-1 cleat weigh?\u003c\/strong\u003e It weighs 0.346 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the flush flat head design matter for installation?\u003c\/strong\u003e Yes, the flat head (FH) fastener style used with the 046108-1 lets the fastener heads sit flush with the base for a clean, low-profile mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 046108-1 cleat?\u003c\/strong\u003e Its dimensions are 8 inches by 1-7\/8 inches by 1-1\/2 inches by 2-11\/16 inches, as measured across the cleat body and base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 046108-1 suitable for permanent or removable installations?\u003c\/strong\u003e It is a fastener-mounted cleat (not welded), installed with two flat head fasteners, making it suitable for standard bolt-on mounting rather than a welded permanent install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the 046108-1 cleat?\u003c\/strong\u003e This cleat is manufactured by Sea-Dog.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many of these cleats come in a standard package?\u003c\/strong\u003e The 046108-1 has a standard pack quantity of 10 each, though it is also available and sold individually.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544565467,"sku":"S-D-046108-1","price":10.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7478.jpg?v=1784421861"},{"product_id":"sea-dog-060040-1-bow-chocks-4-3-4-316-stainless-steel-left-right-pair-for-mooring-dock-lines","title":"Sea-Dog Bow Chock 060040-1, 316 Stainless Steel, 4-3\/4 Inch, Pair","description":"\u003cp\u003eThe Sea-Dog Bow Chock 060040-1 gives your mooring and dock lines a smooth, controlled lead off the bow, protecting your deck from abrasion caused by working lines under load. Each chock is designed with rounded edges set at a proper slant, a shape that prevents chafing as the line moves with the boat's motion. This part is sold as a matched pair, with both the left (port) and right (starboard) bow chocks included, so one purchase outfits both sides of the bow.\u003c\/p\u003e\u003cp\u003eConstruction is investment cast 316 stainless steel, a grade chosen for its resistance to marine corrosion and its strength under the repeated load of mooring and dock lines. The chock measures 4-3\/4 inches along its A dimension, with a 5\/8 inch B dimension, a 1\/2 inch C dimension, and a 3-1\/4 inch D dimension, and each chock mounts with a #10 flat head fastener (fasteners are not included and must be sourced separately). At 0.27 pounds, it is a compact, low-profile fitting suited to the bow of small to mid-size boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 060040-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bow Chock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 4-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 3-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.27 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Left and right bow chocks (pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal deck fitting, not restricted to a specific make, model, or year of boat.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 060040-1 bow chock made of?\u003c\/strong\u003e The 060040-1 bow chock is made of investment cast 316 stainless steel, a corrosion-resistant grade suited to saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bow chock come as a pair?\u003c\/strong\u003e Yes, part number 060040-1 is sold as a matched pair and includes both the left and right bow chock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 060040-1 bow chock?\u003c\/strong\u003e The 060040-1 bow chock measures 4-3\/4 inches (dimension A), 5\/8 inches (dimension B), 1\/2 inches (dimension C), and 3-1\/4 inches (dimension D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the bow chock weigh?\u003c\/strong\u003e Each Sea-Dog 060040-1 bow chock weighs 0.27 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fasteners does the 060040-1 bow chock use?\u003c\/strong\u003e This bow chock is designed to install with a #10 flat head fastener; fasteners are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with the bow chock?\u003c\/strong\u003e No, the Sea-Dog 060040-1 bow chock installs with two flat head fasteners that are not included and need to be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this bow chock and a Skene chock?\u003c\/strong\u003e The 060040-1 bow chock provides a smooth, slanted lead for mooring and dock lines, while a Skene chock has overlapping tips designed to keep the line from working free as the boat moves; both are made of investment cast 316 stainless steel but serve slightly different chafe-control purposes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this chock prevent my dock lines from chafing?\u003c\/strong\u003e Yes, the 060040-1 bow chock is designed with rounded edges set at a proper slant specifically to minimize chafing on mooring and dock lines under load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 060040-1 bow chock suitable for saltwater use?\u003c\/strong\u003e Yes, it is constructed of investment cast 316 stainless steel, a grade chosen for corrosion resistance in marine and saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 060040-1 fit a specific boat make or model?\u003c\/strong\u003e No, the Sea-Dog 060040-1 bow chock is a universal deck fitting and is not limited to a specific boat make, model, or year.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 'A' through 'D' measurements refer to on the bow chock?\u003c\/strong\u003e For the 060040-1 bow chock, these are the manufacturer's reference dimensions: A is 4-3\/4 inches, B is 5\/8 inches, C is 1\/2 inches, and D is 3-1\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the bow chock installed on the boat?\u003c\/strong\u003e The Sea-Dog 060040-1 bow chock is installed using two flat head (#10) fasteners per chock, which are not included with the part.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544762075,"sku":"S-D-060040-1","price":40.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7485.jpg?v=1784421915"},{"product_id":"taylor-made-products-12-straight-mount-dock-wheel-mpn-1073-inflatable-dock-guard-made-in-usa","title":"Taylor Made Products 12 Inch Dock Wheel, Straight Mount, Galvanized Hardware","description":"\u003cp\u003eThe Taylor Made Products 12 Inch Dock Wheel (part number 1073) is a straight-mount dock wheel built to protect boats from rubbing and impact damage against the dock. The wheel rolls smoothly to cushion contact and reduce hull wear, and it features a molded-in valve so you can adjust internal air pressure to set the level of firmness that suits your dock and boat size. A large 2 inch diameter axle housing runs through the wheel for added strength under repeated use.\u003c\/p\u003e\u003cp\u003eThe mounting hardware is heavy-duty and hot-dipped galvanized, allowing it to be bolted securely to a dock structure while resisting corrosion in a marine environment. This is the straight mount version; a corner mount version is also offered as a separate part, and the mounting bracket and wheel are not interchangeable between the two styles, so confirm you are ordering the correct mount type for your dock layout. The dock wheel is backed by a 3 year warranty and is made in the USA.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1073\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dock Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Straight Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Housing Diameter:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011460738\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size dock wheel is part number 1073?\u003c\/strong\u003e Taylor Made Products part number 1073 is a 12 inch diameter dock wheel with a 2 inch diameter axle housing for strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the straight mount or corner mount version?\u003c\/strong\u003e Part number 1073 is the straight mount version of the Taylor Made Products dock wheel; a corner mount version is a separate part, and the two use different brackets that are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the corner mount bracket with this wheel, or vice versa?\u003c\/strong\u003e No, the bracket and wheel on this Taylor Made Products 12 inch dock wheel are not interchangeable with the corner mount version, so each mount style requires its own matching bracket and wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the dock wheel made of?\u003c\/strong\u003e The 12 inch dock wheel (part 1073) uses heavy-duty hot-dipped galvanized hardware for the mounting components, which resists corrosion in marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I adjust how firm the wheel feels?\u003c\/strong\u003e Yes, part number 1073 has a molded-in valve so the firmness can be adjusted by adding or releasing air, similar to inflating a tire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this dock wheel weigh?\u003c\/strong\u003e The Taylor Made Products 12 inch straight mount dock wheel weighs 13.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the dock wheel installed?\u003c\/strong\u003e Part 1073 mounts to the dock using its galvanized hardware and bracket, bolting securely to the dock structure in the straight mount orientation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Taylor Made Products dock wheel?\u003c\/strong\u003e This 12 inch straight mount dock wheel (part 1073) is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this dock wheel covered by a warranty?\u003c\/strong\u003e Yes, the Taylor Made Products 12 inch dock wheel, part number 1073, is backed by a 3 year warranty and is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the dock wheel protect against?\u003c\/strong\u003e The 12 inch straight mount dock wheel rolls to cushion contact between a boat and the dock, helping prevent rubbing and impact damage to the hull.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989664411867,"sku":"NAT-1073","price":174.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__53290.1763741540.500.750.jpg?v=1785188212"},{"product_id":"taylor-made-products-1078-dock-pro-inflatable-dock-wheel-9-inch-corner-mount-marine-grade-vinyl-white","title":"Taylor Made Products Dock Pro Inflatable Dock Wheel, 9 Inch Corner Mount, White","description":"\u003cp\u003eThe Taylor Made Products Dock Pro is an inflatable dock wheel built for corner mount applications, providing smooth-rolling cushioning to protect boats and docks from impact and abrasion during docking. The wheel features a molded-in valve so the level of firmness can be adjusted to suit conditions, letting the wheel act as a soft, forgiving buffer rather than a rigid bumper. It mounts to the dock using heavy-duty hot-dipped galvanized hardware, which resists corrosion in marine environments and keeps the wheel securely anchored through repeated use. The wheel body is made from marine-grade vinyl in white, a material chosen to withstand sun, saltwater, and moisture exposure over time. This 9 inch diameter wheel is designed specifically for corner mount positions on a dock; brackets and wheels are not interchangeable between mounting styles, so this corner mount wheel should be paired with corner mount hardware. Taylor Made backs the Dock Pro with a 3 year warranty, and it is made in the USA. It is a straightforward add-on for dock owners looking to reduce hull scuffing, rub rail wear, and dock damage at corner pilings or edges where boats regularly make contact while docking.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1078\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Corner Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Finish:\u003c\/strong\u003e Hot-dipped galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.65 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal corner mount dock application; not interchangeable with straight mount brackets or wheels.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made Products Dock Pro dock wheel, part number 1078?\u003c\/strong\u003e This dock wheel has a 9 inch diameter and is designed for corner mount installation on a dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dock Pro wheel, part 1078, for a corner mount or straight mount?\u003c\/strong\u003e Part number 1078 is a corner mount dock wheel; brackets and wheels are not interchangeable between corner and straight mount styles, so make sure to order the mount type that matches your dock hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 9 inch dock wheel made from?\u003c\/strong\u003e The Taylor Made Products Dock Pro wheel is made from marine-grade vinyl in white, which is designed to hold up to sun and water exposure at the dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the firmness of this dock wheel be adjusted?\u003c\/strong\u003e Yes, part number 1078 has a molded-in valve so the level of firmness can be adjusted to suit how much cushioning you want at the dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dock Pro corner mount wheel weigh?\u003c\/strong\u003e The Taylor Made Products Dock Pro corner mount dock wheel weighs 4.65 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of mounting hardware comes with this dock wheel?\u003c\/strong\u003e It mounts using heavy-duty hot-dipped galvanized hardware, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this dock wheel made in the USA?\u003c\/strong\u003e Yes, the Taylor Made Products Dock Pro dock wheel is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Dock Pro dock wheel?\u003c\/strong\u003e Taylor Made Products backs part number 1078 with a 3 year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use a corner mount bracket from another dock wheel with this one?\u003c\/strong\u003e No, brackets and wheels are not interchangeable, so a corner mount bracket intended for a different wheel should not be paired with the 9 inch Dock Pro wheel, part 1078.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does this dock wheel protect against?\u003c\/strong\u003e The 9 inch corner mount wheel provides rolling cushioning at the dock to help reduce impact and abrasion damage to boats and dock structures during docking.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989664477403,"sku":"NAT-1078","price":100.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__10587.1763741540.500.750.jpg?v=1785188092"},{"product_id":"taylor-made-products-12-inch-corner-mount-dock-wheel-1072-marine-grade-vinyl-with-molded-in-valves-fits-boats-20-to-30-ft","title":"Taylor Made Products 12 Inch Corner Mount Dock Wheel, Part 1072, Fits Boats 20 to 30 Feet","description":"\u003cp\u003eThe Taylor Made Products 12 inch Corner Mount Dock Wheel (part 1072) is an inflatable dock wheel built to cushion boats against the dock at corner mounting points. The wheel uses molded-in air valves so you can adjust the level of firmness to suit your dock and boat weight, and it is sized for boats in the 20 to 30 foot range. A large 2-inch diameter axle housing gives the wheel added strength where it mounts to the dock bracket, and the mounting hardware is hot-dipped galvanized for corrosion resistance in a marine environment. The wheel itself is finished in white marine-grade vinyl and measures 12 inches in diameter, with a 6.5 inch pitch circle diameter and 4.75 inch wheel backspacing.\u003c\/p\u003e\u003cp\u003eThis is the corner mount configuration; Taylor Made also offers a straight mount version of this wheel as a separate part for dock edges that are not at a corner, so confirm your mounting location before ordering. Mounting hardware for attaching the bracket to the dock is not included with the wheel. Brackets and wheels are not interchangeable between sizes, and if you only need to replace the wheel itself, the replacement wheel includes the cap and washer.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1072\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Corner Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Diameter:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Circle Diameter:\u003c\/strong\u003e 6.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Backspacing:\u003c\/strong\u003e 4.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRim Size:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Housing Diameter:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized steel hardware with marine-grade vinyl wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 20 feet to 30 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Finish:\u003c\/strong\u003e Hot-dipped galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Dock wheel with cap and washer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011460721\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRecommended for boats 20 feet to 30 feet in length\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boat sizes is the Taylor Made 1072 dock wheel designed for?\u003c\/strong\u003e The 12 inch corner mount dock wheel, part 1072, is recommended for boats 20 feet to 30 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the corner mount or straight mount version?\u003c\/strong\u003e Part 1072 is the corner mount configuration; a straight mount version of the same 12 inch wheel is sold as a separate part number for non-corner dock edges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the wheel come with mounting hardware?\u003c\/strong\u003e Mounting hardware to attach the wheel to the dock bracket is not included with the Taylor Made 1072 dock wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the wheel?\u003c\/strong\u003e The wheel measures 12 inches in diameter with a 6.5 inch pitch circle diameter and 4.75 inch wheel backspacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this dock wheel weigh?\u003c\/strong\u003e The Taylor Made 1072 corner mount dock wheel weighs 13.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this wheel with any dock bracket?\u003c\/strong\u003e Brackets and wheels for Taylor Made dock wheel systems are not interchangeable, so the wheel should be paired with its matching bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the wheel made from?\u003c\/strong\u003e The wheel body is marine-grade vinyl and is inflatable, while the mounting hardware is hot-dipped galvanized steel for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the firmness of the wheel be adjusted?\u003c\/strong\u003e Yes, the 1072 wheel has a molded-in air valve so you can inflate or deflate it to adjust firmness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the wheel?\u003c\/strong\u003e The Taylor Made 1072 dock wheel is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIf just the wheel wears out, can I replace only the wheel?\u003c\/strong\u003e Yes, the replacement wheel for the 1072 includes the cap and washer needed for reinstallation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the axle housing size on this dock wheel?\u003c\/strong\u003e The 1072 uses a 2-inch diameter axle housing for added mounting strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part 1072 an original Taylor Made Products part?\u003c\/strong\u003e Yes, 1072 is the manufacturer part number for this genuine Taylor Made Products 12 inch corner mount dock wheel.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989664542939,"sku":"NAT-1072","price":185.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__27526.1763741540.500.750.jpg?v=1785189197"},{"product_id":"taylor-made-products-1079-dock-pro-straight-mount-dock-wheel-9-inch-diameter-inflatable-boat-wheel-with-galvanized-hardware","title":"Taylor Made Products Dock Wheel 1079, 9 Inch Straight Mount, Galvanized Metal","description":"\u003cp\u003eThe Taylor Made Products Dock Wheel, part number 1079, is a 9 inch diameter straight mount wheel built to cushion and protect docks from impact. It uses smooth rolling wheel construction that offers substantial dock cushioning, reducing wear where boats and dock hardware make contact. Each wheel features a molded-in valve so the level of firmness can be adjusted to suit the application, letting the owner tune the ride and cushioning to their dock setup.\u003c\/p\u003e\u003cp\u003eMounting hardware is heavy-duty hot-dipped galvanized, allowing the wheel to mount securely to the dock while resisting corrosion in the marine environment. The wheel itself is made of galvanized metal with a zinc exterior finish and a white wheel color, matched to a straight mount bracket configuration. Note that brackets and wheels in this product line are not interchangeable between mount types, so the straight mount bracket and wheel should be paired together as sold.\u003c\/p\u003e\u003cp\u003eThis 9 inch straight mount dock wheel is intended for dock bumper and fender applications where a rolling wheel is preferred over a fixed bumper, helping boats glide against the dock edge instead of scraping.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1079\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Straight Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.65 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011460790\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Dock Wheel, Straight Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Products 1079 dock wheel used for?\u003c\/strong\u003e The 1079 is a 9 inch diameter dock wheel that mounts to a dock to cushion contact with a boat, rolling against the hull instead of scraping it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a straight mount or corner mount wheel?\u003c\/strong\u003e Part number 1079 is the straight mount configuration; Taylor Made Products offers straight and corner mount versions, so confirm you are ordering the straight mount if that is what your dock bracket requires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the 1079 dock wheel?\u003c\/strong\u003e It has a 9 inch diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the dock wheel made from?\u003c\/strong\u003e The wheel is made of galvanized metal with a zinc exterior finish, and the mounting hardware is hot-dipped galvanized for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the firmness of the wheel be adjusted?\u003c\/strong\u003e Yes, the 1079 wheel has a molded-in valve so air can be added or released to adjust how firm the wheel feels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1079 dock wheel weigh?\u003c\/strong\u003e It weighs 4.65 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this listing include the mounting bracket?\u003c\/strong\u003e The included components are the dock wheel and straight mount hardware; the wheel and bracket are not interchangeable with other mount styles, so make sure the bracket type matches this straight mount wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 1079 dock wheel?\u003c\/strong\u003e It is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this wheel mount to the dock?\u003c\/strong\u003e It mounts using heavy-duty hot-dipped galvanized hardware that secures the wheel assembly directly to the dock structure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the wheel and bracket sold as one unit?\u003c\/strong\u003e Yes, part number 1079 is sold as a complete straight mount dock wheel assembly; Taylor Made Products notes that brackets and wheels across its dock wheel line are not interchangeable, so pair the correct bracket with this wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made Products 1079 dock wheel?\u003c\/strong\u003e The UPC is 040011460790.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989664608475,"sku":"NAT-1079","price":94.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__87335.1773195298.500.750.jpg?v=1785188935"},{"product_id":"attwood-12048-4-6-inch-fold-down-dock-cleat-white-aluminum-low-profile-marine-mooring-cleat","title":"Attwood 12048-4 Fold-Down Dock Cleat, 6-Inch, White Aluminum","description":"\u003cp\u003eThe attwood 12048-4 is a 6-inch fold-down dock cleat built from aluminum and finished in white for corrosion resistance in marine environments. Designed for small boats and watercraft, the cleat folds flat against the dock surface when not in use, keeping the low-profile design clear of foot traffic and reducing the tripping hazard posed by taller, fixed cleats. When it is time to tie off, the cleat simply flips back up to secure mooring or docking lines.\u003c\/p\u003e\u003cp\u003eConstruction is marine-grade aluminum with a corrosion-resistant exterior finish, making the 12048-4 suitable for saltwater and freshwater dock installations alike. It installs on standard dock surfaces using two 3\/8-inch carriage bolts (mounting hardware is not included). This is the 6-inch size in attwood's fold-down cleat line, sized for smaller boats and personal watercraft where a compact, unobtrusive cleat is preferred over a larger fixed cleat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 12048-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fold-Down Dock Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Corrosion-resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleat Length:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7.05 x 6.78 x 2.7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.69 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Not included; requires (2) 3\/8-inch carriage bolts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697120489\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the attwood 12048-4 dock cleat?\u003c\/strong\u003e The 12048-4 is a 6-inch fold-down cleat, with overall item dimensions of 7.05 x 6.78 x 2.7 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 12048-4 cleat made of?\u003c\/strong\u003e It is made of marine-grade aluminum with a corrosion-resistant white finish, suited to saltwater and freshwater dock use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fold-down cleat come with mounting hardware?\u003c\/strong\u003e No, mounting hardware is not included with the 12048-4; it installs using two 3\/8-inch carriage bolts that you supply separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a fold-down cleat differ from a standard fixed dock cleat?\u003c\/strong\u003e The 12048-4 folds flat against the dock when not in use and flips up to tie off, keeping its low profile clear of foot traffic, unlike a taller fixed cleat that remains upright and can be a tripping hazard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 12048-4 cleat?\u003c\/strong\u003e This cleat is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the attwood 12048-4 weigh?\u003c\/strong\u003e It weighs 0.69 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat suitable for small boats?\u003c\/strong\u003e Yes, the 6-inch attwood 12048-4 is sized for small boats and watercraft where a compact fold-down cleat is preferred.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a larger fold-down cleat available?\u003c\/strong\u003e Yes, attwood also offers an 8-inch fold-down cleat (part number 12049-4) in white as a separate part for larger boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 12048-4 corrode in saltwater?\u003c\/strong\u003e The cleat's aluminum construction has a corrosion-resistant finish designed to hold up in saltwater and freshwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the attwood 12048-4?\u003c\/strong\u003e The package includes the fold-down cleat itself; mounting bolts are not included.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989665067227,"sku":"ATT-12048-4","price":16.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71pfCTIYVAL.jpg?v=1784486490"},{"product_id":"attwood-12049-4-8-inch-white-fold-down-dock-cleat-for-small-boats-and-docks","title":"Attwood 8-Inch Fold-Down Dock Cleat, White, Model 12049-4","description":"\u003cp\u003eThe Attwood 12049-4 is an 8-inch fold-down dock cleat finished in white, built for tying off small boats and watercraft at the dock. Unlike a fixed, upright cleat, this design folds flat against the mounting surface when it is not in use and flips back up when it is time to tie off, keeping the cleat clear of foot traffic. Its low-profile shape reduces the trip hazard that comes with taller, stationary dock cleats, making it a practical choice for gunwales, swim platforms, docks, and other high-traffic areas where a permanently upright cleat would be in the way.\u003c\/p\u003e\u003cp\u003eThe cleat measures 7.05 x 6.78 x 2.7 inches overall with an 8-inch cleat length, and weighs 1.19 pounds. It installs with a panel-mount setup using two 3\/8-inch carriage bolts; mounting hardware is not included, so bolts should be purchased separately to match the thickness of the mounting surface. The cleat ships as a standalone unit in white, ready to bolt onto the dock or boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 12049-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fold-Down Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleat Length:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7.05 x 6.78 x 2.7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.19 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e 2 x 3\/8-inch carriage bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697120496\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 12049-4 dock cleat made of?\u003c\/strong\u003e The Attwood 12049-4 is a plastic fold-down cleat finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Attwood 12049-4 cleat?\u003c\/strong\u003e It has an 8-inch cleat length, with overall dimensions of 7.05 x 6.78 x 2.7 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 12049-4 cleat come with mounting bolts?\u003c\/strong\u003e No. It installs with two 3\/8-inch carriage bolts, which are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cleat weigh?\u003c\/strong\u003e The Attwood 12049-4 weighs 1.19 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is a fold-down cleat different from a fixed dock cleat?\u003c\/strong\u003e A fold-down cleat like the 12049-4 lies flat against the dock or gunwale when not in use and flips upright to tie off a line, while a fixed cleat stands upright permanently.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Attwood 12049-4 cleat?\u003c\/strong\u003e This cleat is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 12049-4 cleat installed?\u003c\/strong\u003e It uses a panel-mount installation with two 3\/8-inch carriage bolts driven through the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the low-profile design useful for anything besides looks?\u003c\/strong\u003e Yes, folding the 12049-4 cleat flat when it is not tied off keeps it clear of foot traffic and reduces the trip hazard posed by taller, upright dock cleats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Attwood 12049-4 cleat meant for?\u003c\/strong\u003e It is sized for small boats and watercraft that need a compact, occasional-use tie-off point at the dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 12049-4 cleat?\u003c\/strong\u003e The order includes the Attwood 12049-4 fold-down cleat itself; mounting bolts are not included.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989665329371,"sku":"ATT-12049-4","price":30.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71VzyOT_8yL.jpg?v=1784486503"},{"product_id":"taylor-made-14-inflatable-dock-wheel-black-marine-grade-vinyl-boat-dock-post-bumper-mpn-1214","title":"Taylor Made 14 Inch Dock Post Wheel, Black Marine-Grade Vinyl, Part 1214","description":"\u003cp\u003eThe Taylor Made 14 Inch Dock Post Wheel (Part 1214) is a roller-style dock bumper built to protect a boat's hull and topsides as it comes alongside a dock post or piling. The wheel mounts on a dock post and rolls smoothly along the boat as it moves in and out of the slip, cushioning contact and preventing scuffs, scrapes, and gouges to the gelcoat. It is constructed from marine-grade vinyl (PVC), a flexible, wear-resistant material chosen for its ability to hold up to repeated impact, sun exposure, and constant contact with water without cracking or losing its shape over time.\u003c\/p\u003e\u003cp\u003eFinished in black, the 14 inch wheel is sized for boats using standard dock post protection setups and is designed as a durable, long-service replacement or upgrade for an existing dock post wheel. It ships as a single wheel unit ready to install on a compatible dock post. This is a straightforward, functional piece of dock hardware meant to reduce maintenance and repair costs by keeping the hull away from direct contact with the post.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1214\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dock Post Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl (PVC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Index:\u003c\/strong\u003e 110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011718143\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00040011718143\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Warranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 1 Dock Post Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made 1214 dock post wheel used for?\u003c\/strong\u003e The Taylor Made 1214 is a 14 inch dock post wheel that mounts on a dock post or piling and rolls against a boat's hull to prevent scuffing and damage as the boat moves in and out of its slip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this dock wheel?\u003c\/strong\u003e Part 1214 is a 14 inch dock post wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Taylor Made 1214 wheel made from?\u003c\/strong\u003e It is made from marine-grade vinyl (PVC), a flexible material chosen for resistance to wear, sun exposure, and repeated contact with the dock post and hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part 1214?\u003c\/strong\u003e The Taylor Made 1214 dock post wheel is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1214 dock wheel weigh?\u003c\/strong\u003e The Taylor Made 1214 dock post wheel weighs 4.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many wheels come in the package?\u003c\/strong\u003e One Taylor Made 1214 dock post wheel is included per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1214 wheel durable enough for regular use?\u003c\/strong\u003e Yes. The marine-grade vinyl construction is designed to withstand the repeated impact and wear of everyday docking as well as ongoing exposure to sun and water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Taylor Made 1214 dock wheel come with a warranty?\u003c\/strong\u003e Yes, the Taylor Made 1214 dock post wheel carries a 90 day manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load index of the 1214 dock wheel?\u003c\/strong\u003e The Taylor Made 1214 dock post wheel has a load index of 110.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1214 an OEM part?\u003c\/strong\u003e Yes, 1214 is Taylor Made's own manufacturer part number for this dock post wheel, not an aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 1214 wheel fit any dock post?\u003c\/strong\u003e The 1214 is a standard 14 inch dock post wheel designed to mount on a compatible dock post; specific post diameter compatibility should be checked against your existing hardware.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989669228763,"sku":"NAT-1214","price":57.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/1214__51135.1722493764.500.750.jpg?v=1785188962"},{"product_id":"taylor-made-products-1224-inflatable-corner-bumper-adjustable-firmness-fender-cushion-18-in-per-side","title":"Taylor Made Products Corner Dock Bumper 1224, Inflatable with Adjustable-Firmness Valve, 18 Inch","description":"\u003cp\u003eThe Taylor Made Products Corner Dock Bumper, part number 1224, is a corner-style dock fender built to cushion the corner of a dock or piling from boat and dock-lift impact. It is inflatable, and an inflation valve lets you dial in the firmness of the bumper to suit how much cushioning you want at that corner. Each side of the corner piece measures 3-1\/4 inches in diameter by 5 inches tall by 18 inches long, giving it a low, elongated profile that wraps the corner edge rather than sitting as a single round fender. At 8 pounds, it is light enough to position and mount without special equipment. This is the genuine Taylor Made Products part 1224, made for boat dock corners where a standard straight-run bumper will not follow the angle.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1224\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Corner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (each side):\u003c\/strong\u003e 3-1\/4 inches diameter x 5 inches tall x 18 inches long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature:\u003c\/strong\u003e Inflation valve to adjust firmness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011718136\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Dock Bumper\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Products 1224 corner dock bumper used for?\u003c\/strong\u003e It cushions the corner of a boat dock or piling from impact, using a corner-fit shape that follows the angle of the dock instead of a straight run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 1224 corner bumper?\u003c\/strong\u003e Each side of the Taylor Made Products 1224 measures 3-1\/4 inches in diameter by 5 inches tall by 18 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the firmness of the bumper be adjusted?\u003c\/strong\u003e Yes, the 1224 corner bumper has an inflation valve that lets you adjust how firm the bumper is.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1224 corner dock bumper weigh?\u003c\/strong\u003e It weighs 8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1224 an inflatable bumper?\u003c\/strong\u003e Yes, it is an inflatable corner bumper with a valve for adjusting inflation and firmness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this corner dock bumper?\u003c\/strong\u003e The manufacturer part number is 1224, made by Taylor Made Products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made 1224 corner dock bumper?\u003c\/strong\u003e The UPC is 040011718136.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Taylor Made Products part or an aftermarket copy?\u003c\/strong\u003e Part number 1224 is a genuine Taylor Made Products corner dock bumper, not an aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1224 bumper come with mounting hardware?\u003c\/strong\u003e The available specifications for the Taylor Made 1224 corner bumper list its dimensions, weight, and inflation valve but do not list included mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape is the 1224 dock bumper?\u003c\/strong\u003e It is a corner-style bumper, with each of its two sides measuring 3-1\/4 inches diameter by 5 inches tall by 18 inches long so it wraps a dock corner.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989669523675,"sku":"NAT-1224","price":146.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__56888.1763741618.500.750.jpg?v=1785188232"},{"product_id":"taylor-made-hull-saver-vinyl-covered-straight-dock-bumper-white-24l-x-4t-x-2-1-2d-mpn-344","title":"Taylor Made Products Dock Bumper 344, Standard Straight, White, 24 x 4 x 2-1\/2 Inches","description":"\u003cp\u003eThe Taylor Made Products Dock Bumper, Standard Straight (Part No. 344), is a vinyl-covered hull protector designed to cushion your boat's hull against dock pilings, seawalls, and other hard mooring surfaces. Its straight profile runs 24 inches long, making it easy to mount along a dock edge or piling wherever extra impact protection is needed. The bumper is built with corrosion-proof grommets at the mounting points, so hardware exposed to constant moisture and saltwater resists rust and premature failure. The vinyl covering shields the foam core from UV exposure, abrasion, and water intrusion, helping the bumper hold up to repeated contact over a boating season after season. Finished in white, it blends in with most hull colors and dock trim rather than standing out as an aftermarket add-on. At 24 inches long by 4 inches tall by 2-1\/2 inches deep, it is sized for typical recreational boat and dock applications where a compact, low-profile bumper is preferred over a bulkier fender. Weighing 0.55 pounds, it is light enough to mount and remove without special tools or hardware beyond basic dock line or fastener attachment. This is a straightforward, no-frills dock bumper for boat owners who want reliable hull protection without a large fender taking up space on the dock or gunwale.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 344\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 24 inches L x 4 inches T x 2-1\/2 inches D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.55 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl-covered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Corrosion-proof grommets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Standard straight profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011669681\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Products Dock Bumper 344 made of?\u003c\/strong\u003e It is a vinyl-covered dock bumper, part number 344, with a foam core wrapped in vinyl to resist UV exposure, abrasion, and water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is dock bumper 344?\u003c\/strong\u003e The Taylor Made 344 dock bumper measures 24 inches long by 4 inches tall by 2-1\/2 inches deep, a straight profile sized for typical dock and hull applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 344 dock bumper weigh?\u003c\/strong\u003e It weighs 0.55 pounds, per the manufacturer's listed weight for part number 344.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options does part number 344 come in?\u003c\/strong\u003e This listing for Taylor Made part number 344 is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 344 dock bumper have corrosion-resistant hardware?\u003c\/strong\u003e Yes, the mounting grommets on the Taylor Made 344 dock bumper are corrosion-proof, which matters since dock bumpers stay exposed to constant moisture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a straight or curved dock bumper?\u003c\/strong\u003e Part number 344 is a standard straight dock bumper, intended for mounting along a flat dock edge or piling rather than a corner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Taylor Made 344 dock bumper mounted?\u003c\/strong\u003e It mounts using the corrosion-proof grommets built into the vinyl-covered body, allowing it to be fastened along a dock edge, piling, or hull rail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part number 344?\u003c\/strong\u003e The order includes one Taylor Made Products Dock Bumper, Standard Straight, part number 344, in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Taylor Made part number 344 an OEM part?\u003c\/strong\u003e Yes, 344 is the genuine Taylor Made Products manufacturer part number for this white straight dock bumper, not an aftermarket reproduction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 344 dock bumper protect my hull from dock pilings?\u003c\/strong\u003e It is designed to cushion the hull against dock pilings, seawalls, and other hard mooring surfaces, which is the primary purpose of the Taylor Made 344 dock bumper.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989670637787,"sku":"NAT-344","price":17.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71tO0b47QSL.jpg?v=1784486867"},{"product_id":"taylor-made-products-345-hull-saver-vinyl-corner-dock-bumper-10-x-10-x-4-x-2-1-2-white","title":"Taylor Made Products Corner Dock Bumper #345, 10 In x 10 In x 4 In Tall x 2-1\/2 In Deep, White Vinyl","description":"\u003cp\u003eThe Taylor Made Products Corner Dock Bumper, part number 345, is a vinyl-covered corner bumper built to cushion and protect boat hulls where they meet the corner edge of a dock. Its L-shaped profile wraps around a dock corner to absorb impact and prevent scuffing, scratching, and hull damage during docking, mooring, and rough water conditions. The bumper measures 10 inches by 10 inches along its two mounting legs, stands 4 inches tall, and is 2-1\/2 inches deep, giving it enough cushioning depth to protect against repeated contact.\u003c\/p\u003e\u003cp\u003eThe bumper is covered in a vinyl and polyester exterior finish for weather and UV resistance, finished in white to blend with most hull and dock colors. Corrosion-proof grommets are built into the mounting points, making it straightforward to attach with screws or fasteners to a dock corner, piling, or similar structure. At 0.45 pounds, it is lightweight and easy to install without special tools. This corner bumper is a universal-fit dock accessory suited to any dock, pier, or piling corner that needs hull protection.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 345\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Corner Dock Bumper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 inches x 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial \/ Exterior Finish:\u003c\/strong\u003e Vinyl\/Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Corrosion-proof grommets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011669698\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made Products corner dock bumper, part 345?\u003c\/strong\u003e Part number 345 measures 10 inches by 10 inches along its two mounting legs, stands 4 inches tall, and is 2-1\/2 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bumper made for a dock corner or a straight edge?\u003c\/strong\u003e It is a corner bumper, shaped to wrap around and protect a dock corner rather than a straight dock edge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the corner bumper made of?\u003c\/strong\u003e The Taylor Made Products #345 bumper has a vinyl and polyester exterior finish, chosen for weather and UV resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does part number 345 come in?\u003c\/strong\u003e It is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the corner dock bumper weigh?\u003c\/strong\u003e 0.45 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the bumper mounted to the dock?\u003c\/strong\u003e Part 345 has corrosion-proof grommets built into the mounting points, allowing it to be attached to a dock corner or piling with screws or similar fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this bumper fit any boat or dock?\u003c\/strong\u003e Yes, the Taylor Made Products corner dock bumper is a universal-fit accessory intended for any dock, pier, or piling corner needing hull protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the corner dock bumper protect against?\u003c\/strong\u003e It cushions the corner contact point between a boat hull and the dock, reducing scuffing, scratching, and impact damage during docking and mooring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part 345?\u003c\/strong\u003e The order includes one Taylor Made Products corner dock bumper with its grommet mounting points; no separate hardware kit is listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part number 345 the same as the manufacturer part number?\u003c\/strong\u003e Yes, 345 is the Taylor Made Products manufacturer part number for this corner dock bumper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the corner bumper different from Taylor Made's straight dock bumpers?\u003c\/strong\u003e Unlike Taylor Made's straight bumpers, part 345 has an L-shaped 10 inch by 10 inch profile designed specifically to wrap around a dock corner rather than run along a flat edge.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989670703323,"sku":"NAT-345","price":19.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/1__00507.1763741613.500.750.jpg?v=1785188648"},{"product_id":"taylor-made-348-hull-saver-large-straight-dock-bumper-60-l-x-8-x-6-d-vinyl-covered-hd-foam-white","title":"Taylor Made Dock Bumper 348, 60 Inch Large Straight Hull-Saver Fender, White","description":"\u003cp\u003eThe Taylor Made 348 is a 60 inch large straight dock bumper built to protect boat hulls from impact and abrasion during docking and rafting. It uses a high-density polyethylene foam core for shock absorption, wrapped in a UV-resistant, tear-proof vinyl covering that stays flexible and holds up to sun exposure over time. Corrosion-resistant grommets are set into the bumper for a secure, long-lasting mount to dock pilings, pier edges, or dock frames.\u003c\/p\u003e\u003cp\u003eAt 60 inches long, 8 inches thick, and 6 inches deep, the 348 is sized for full-length coverage along a dock run or hull side, making it suited to both private and commercial marina use. It is finished in white and weighs 1.3 pounds, making it easy to position and install without added bulk. Taylor Made builds this bumper in the USA as part of its straight-profile marine bumper lineup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 348\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Dock Bumper, Large Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 60 inches L x 8 inches T x 6 inches D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polyethylene foam core with vinyl covering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Corrosion-resistant grommets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011675040\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made 348 dock bumper?\u003c\/strong\u003e The Taylor Made 348 measures 60 inches long by 8 inches thick by 6 inches deep, and it is described as the large straight bumper in the Taylor Made lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made 348 dock bumper made of?\u003c\/strong\u003e It has a high-density polyethylene foam core covered in a UV-resistant, tear-proof vinyl layer, which absorbs impact while resisting sun damage and tearing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 348 dock bumper weigh?\u003c\/strong\u003e The Taylor Made 348 weighs 1.3 pounds, which is light enough for one person to position and mount without help.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 348 dock bumper come in?\u003c\/strong\u003e This bumper is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 348 suitable for a commercial marina?\u003c\/strong\u003e Yes, the 60 inch straight profile is built to handle both private docks and commercial marina use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Taylor Made 348 dock bumper mounted?\u003c\/strong\u003e It mounts using built-in corrosion-resistant grommets, which allow it to be fastened to a dock, piling, or pier edge and resist rust over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Taylor Made 348 manufactured?\u003c\/strong\u003e The 348 dock bumper is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Taylor Made 348 and the 347 dock bumper?\u003c\/strong\u003e The 348 is 60 inches long by 8 inches thick by 6 inches deep, while the smaller 347 straight bumper measures 36 inches long by 8 inches thick by 6 inches deep, making the 348 the choice for longer coverage runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 348 a straight or corner dock bumper?\u003c\/strong\u003e The 348 is a straight bumper, distinct from Taylor Made's corner bumper option (model 350), which is shaped for mounting at dock corners rather than along a straight run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the foam core of the 348 dock bumper hold up over time?\u003c\/strong\u003e The high-density polyethylene foam core is designed to resist compression from repeated impacts, and its vinyl covering is tear-proof and UV-resistant to prevent it from breaking down in sunlight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Taylor Made 348 come with mounting hardware included?\u003c\/strong\u003e The bumper includes corrosion-resistant grommets built into it for mounting, so no separate mounting hardware needs to be sourced to attach it to a dock or piling.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989670834395,"sku":"NAT-348","price":75.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31gVNlrLMVL.jpg?v=1784486879"},{"product_id":"taylor-made-products-349-heavy-duty-straight-dock-bumper-36-vinyl-covered-boat-dock-guard-with-corrosion-proof-grommets","title":"Taylor Made Products Heavy Duty Dock Bumper - Straight, 36 x 5.9 x 4 Inches","description":"\u003cp\u003eThis heavy duty straight dock bumper from Taylor Made Products is built to absorb impact and prevent scuffing wherever a boat meets a dock, piling, or seawall. The core is high-density closed cell polyethylene foam, which keeps its shape and cushioning ability even after repeated compression from docking or rafting up alongside other boats. That foam core is fully wrapped in a tough vinyl\/polyester tri-laminate covering that resists tearing and UV breakdown, so the bumper holds its color and flexibility through seasons of sun exposure and abrasion against rough dock edges.\u003c\/p\u003e\u003cp\u003eMounting is handled through corrosion-proof grommets molded into the ends, letting you lash or bolt the bumper to a dock post, rail, or hull rub rail without worrying about rust streaks or grommet failure over time. Because it is a straight profile bumper with a universal fit, it works across a wide range of boats and dock setups rather than being limited to one hull shape or size. It is a straightforward, durable way to add a dedicated buffer zone anywhere hard contact between a boat and a fixed structure is likely.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 349\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Heavy Duty Dock Bumper - Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 36 x 5.9 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density closed cell polyethylene foam with UV-resistant vinyl\/polyester tri-laminate cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltraviolet Light Protection:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011675057\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Products dock bumper 349 used for?\u003c\/strong\u003e It is a heavy duty straight dock bumper designed to protect a boat hull and dock structure from impact and abrasion during docking or when rafting up alongside another boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this dock bumper made of?\u003c\/strong\u003e The core is high-density closed cell polyethylene foam, wrapped in a UV-resistant and tear-proof vinyl\/polyester tri-laminate covering, giving part number 349 its cushioning and weather resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is dock bumper 349?\u003c\/strong\u003e It measures 36 x 5.9 x 4 inches, sized as a straight profile bumper for mounting along a dock, piling, or rail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 349 dock bumper weigh?\u003c\/strong\u003e This Taylor Made Products dock bumper weighs 1.45 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this bumper fit my boat or dock?\u003c\/strong\u003e Yes, part number 349 is a universal fit dock bumper, meaning it is not limited to a specific boat model or dock design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the dock bumper attached?\u003c\/strong\u003e Corrosion-proof grommets are built into the bumper for easy attachment to a dock, rail, or other mounting point without risk of rust.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this dock bumper UV resistant?\u003c\/strong\u003e Yes, the tri-laminate vinyl\/polyester covering on the 349 dock bumper is UV resistant, so it will not break down quickly from sun exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 349 dock bumper water resistant?\u003c\/strong\u003e Yes, it is rated water resistant, which suits its constant exposure to dock and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Taylor Made Products 349 dock bumper?\u003c\/strong\u003e It is offered in a multi color finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this dock bumper?\u003c\/strong\u003e Each order includes one Taylor Made Products Heavy Duty Dock Bumper - Straight, part number 349.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989670998235,"sku":"NAT-349","price":29.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/lsc__45251.1754571746.500.750.jpg?v=1785188700"},{"product_id":"taylor-made-products-350-heavy-duty-corner-dock-bumper-vinyl-covered-closed-cell-foam-piling-and-corner-guard","title":"Taylor Made Products Heavy Duty Corner Dock Bumper, Part Number 350, Vinyl\/Polyester Fender","description":"\u003cp\u003eThe Taylor Made Products Heavy Duty Corner Dock Bumper (Part Number 350) is built to protect boats and docks from impact damage during docking, rafting, and mooring. Its corner design makes it well suited for protecting dock edges and pilings where boats commonly make contact. The bumper is covered in a tough vinyl\/polyester tri-laminate blend that resists UV exposure and tearing, so it holds up to sun, saltwater, and repeated abrasion over time. Inside, it is filled with high-density closed cell polyethylene foam, which keeps the bumper buoyant and resilient under repeated compression rather than losing its shape. Corrosion-proof grommets are built into the bumper for easy, secure attachment to a dock, piling, or boat rail, making installation straightforward for a wide range of mounting setups. With a universal fit, this dock bumper works across general marine and personal watercraft docking applications rather than being limited to one boat make or model. It measures 15 inches by 11 inches by 8 inches and weighs 0.9 pounds, making it a compact, easy-to-handle bumper for spot protection at corners and other high-contact areas around the dock.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 350\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Heavy Duty Dock Bumper - Corner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl\/Polyester Tri-Laminate Blend with High-Density Closed Cell Polyethylene Foam Fill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 15 inches D x 11 inches W x 8 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Marine \/ Personal Watercraft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment:\u003c\/strong\u003e Corrosion-Proof Grommets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011675064\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Products Heavy Duty Corner Dock Bumper used for?\u003c\/strong\u003e It is designed to protect boats and docks from impact damage during docking and rafting, with the corner shape aimed at protecting dock edges and pilings where contact is most common.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is part number 350 made of?\u003c\/strong\u003e Part number 350 is covered in a vinyl\/polyester tri-laminate blend that resists UV exposure and tearing, with a fill of high-density closed cell polyethylene foam inside.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this dock bumper fit any boat?\u003c\/strong\u003e Yes, this Taylor Made Products bumper has a universal fit and is intended for general marine and personal watercraft docking applications rather than a specific boat make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the dock bumper attached to a dock or boat?\u003c\/strong\u003e It attaches using corrosion-proof grommets built into the bumper, which allow for easy and secure mounting to a dock, piling, or rail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the corner dock bumper?\u003c\/strong\u003e The bumper measures 15 inches D x 11 inches W x 8 inches H.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the dock bumper weigh?\u003c\/strong\u003e Part number 350 weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this dock bumper?\u003c\/strong\u003e It is listed in a multi color finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the foam inside the bumper closed cell or open cell?\u003c\/strong\u003e The bumper uses high-density closed cell polyethylene foam, which resists water absorption and holds its shape under repeated compression.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the vinyl covering UV resistant?\u003c\/strong\u003e Yes, the vinyl\/polyester tri-laminate covering on this Taylor Made Products bumper is UV resistant and tear resistant for outdoor marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bumpers come in the package?\u003c\/strong\u003e The listing includes one Heavy Duty Dock Bumper - Corner, part number 350.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Taylor Made Products part?\u003c\/strong\u003e Yes, part number 350 is a genuine Taylor Made Products component, not a generic aftermarket copy.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989671063771,"sku":"NAT-350","price":28.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/NAT-350__27128.1558341495.500.750.jpg?v=1785189092"},{"product_id":"taylor-made-45600-white-dock-post-bumper-7-x-17-slides-over-1-5-dock-pipe-marine-grade-vinyl-made-in-usa","title":"Taylor Made Dock Post Bumper 45600, White, 7 x 17 Inch Vinyl Post Cushion with Inflation Valve","description":"\u003cp\u003eThe Taylor Made Dock Post Bumper (part number 45600) is a white vinyl cushion built to protect boat hulls from impact and abrasion against dock pilings. It slides directly over a 1.5 inch dock pipe, giving the post a soft, forgiving surface so hull gelcoat and paint stay free of scuffs and dings when a boat comes alongside or shifts with wave action and wind.\u003c\/p\u003e\u003cp\u003eThe bumper body is made from marine grade vinyl, chosen for its resistance to UV exposure, saltwater, and repeated flexing without cracking or splitting. An inflation valve is built into the bumper so owners can adjust internal air pressure to set the firmness that best suits their boat size and dock conditions -- firmer for larger vessels and heavier impacts, softer for smaller boats. At 7 inches in diameter and 17 inches long, it covers a substantial section of post height, and the white finish is a neutral match for most dock and hull colors. The bumper is manufactured in the USA.\u003c\/p\u003e\u003cp\u003eThis bumper fits over a standard 1.5 inch diameter dock pipe. For other post colors, Taylor Made also offers this same bumper style in additional finishes under separate part numbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 45600\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dock Post Bumper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 7 inches diameter x 17 inches long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDock Pipe Fit:\u003c\/strong\u003e Slides over 1.5 inch dock pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature:\u003c\/strong\u003e Inflation valve for adjustable firmness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011735362\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size dock pipe does the Taylor Made 45600 bumper fit?\u003c\/strong\u003e It slides over a 1.5 inch diameter dock pipe, which is the standard size for most residential dock posts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 45600?\u003c\/strong\u003e Part 45600 is the white version of Taylor Made's dock post bumper. The same bumper is also available in other colors under different part numbers, such as a Mid Atlantic Blue version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this dock bumper?\u003c\/strong\u003e The Taylor Made 45600 measures 7 inches in diameter and 17 inches long, covering a substantial section of a dock post.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I adjust how firm the bumper is?\u003c\/strong\u003e Yes, the 45600 bumper has a built-in inflation valve so you can add or release air to set the firmness level for your boat and dock conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the bumper made from?\u003c\/strong\u003e It is made from marine grade vinyl, a material chosen for resistance to UV rays, saltwater exposure, and repeated flexing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made 45600 weigh?\u003c\/strong\u003e The bumper weighs 4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this dock bumper made in the USA?\u003c\/strong\u003e Yes, the Taylor Made 45600 dock post bumper is manufactured in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this bumper attach to a dock post?\u003c\/strong\u003e It is not bolted on -- the vinyl bumper simply slides down over the 1.5 inch dock pipe and stays in place once inflated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fit a dock post larger than 1.5 inches?\u003c\/strong\u003e The 45600 is designed specifically to slide over a 1.5 inch dock pipe, so it is not intended for larger diameter posts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 45600?\u003c\/strong\u003e You receive one white vinyl dock post bumper (part 45600) with its inflation valve already installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Taylor Made make this bumper in other colors?\u003c\/strong\u003e Yes, in addition to the white 45600, Taylor Made offers the same bumper design in other finishes, such as Mid Atlantic Blue under part number 45604, each sold as a separate part number.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989672603867,"sku":"NAT-45600","price":34.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__12160.1756323739.500.750.jpg?v=1785189000"},{"product_id":"taylor-made-46069-wave-pvc-dock-edge-bumper-5-x-25-white-coil-shock-absorbing-dock-edging-hardware-included","title":"Taylor Made Products Wave Dock Edging, White PVC Bumper, 5 Inch x 1\/4 Inch x 25 Foot Coil, Model 46069","description":"\u003cp\u003eThe Taylor Made Products Wave Dock Edging (model 46069) is a heavy-duty vinyl dock bumper designed to protect the sides of a dock or pier from repeated contact with a boat's hull. Sold as a 25 foot coil, this edging is built with a strong polyester core wrapped in a smooth, UV-resistant PVC cover, then molded twice and molecularly bonded for added durability. The construction is both rigid enough to hold its shape and flexible enough to be formed into a wave or loop pattern along the dock edge, creating a shock-absorbing bumper grid that cushions the boat and prevents hull damage during docking.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the flexible vinyl strip is shaped into the wave pattern and nailed directly to the dock, with mounting hardware included in the package. Once installed, the 25 foot coil covers approximately 18 feet of dock edge due to the wave\/loop forming process. This white PVC edging is intended for boat docks and piers and is manufactured in the USA.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 46069\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester core with PVC (vinyl) cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Protects approximately 18 feet of dock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Nail mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16.75 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much dock does the Taylor Made 46069 dock edging cover?\u003c\/strong\u003e One 25 foot coil of the Taylor Made 46069 wave dock edging protects approximately 18 feet of dock once it is formed into its wave\/loop installation pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this dock edging?\u003c\/strong\u003e The Taylor Made 46069 measures 5 inches in height, 1\/4 inch in width, and comes in a 25 foot coil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with part number 46069?\u003c\/strong\u003e Yes, mounting hardware is included with the Taylor Made 46069 wave dock edging, so no separate hardware purchase is needed for a standard nail-mount installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made 46069 dock edging made of?\u003c\/strong\u003e It is constructed with a strong polyester core wrapped in a smooth, UV-resistant PVC (vinyl) cover, molded twice and molecularly bonded for added durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 46069 wave dock edging installed?\u003c\/strong\u003e Installation involves flexing the vinyl strip into a wave or loop shape along the dock edge and nailing it down, which is how the 25 foot coil is able to protect about 18 feet of dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the Taylor Made 46069 come in?\u003c\/strong\u003e The Taylor Made 46069 wave dock edging is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 46069 dock edging weigh?\u003c\/strong\u003e The Taylor Made 46069 weighs 16.75 pounds per 25 foot coil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this dock edging flexible or rigid?\u003c\/strong\u003e The Taylor Made 46069 is designed to be both rigid and flexible, holding its shape as a bumper while remaining pliable enough to be formed into the wave installation pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this dock bumper fit any boat dock?\u003c\/strong\u003e Yes, the Taylor Made 46069 wave dock edging is a universal-fit product intended for boat docks and piers generally, not a specific boat model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Taylor Made 46069 manufactured?\u003c\/strong\u003e The Taylor Made 46069 wave dock edging is made in the USA.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989672636635,"sku":"NAT-46069","price":84.81,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/nat-46069_lg__13242.1558117595.500.750.jpg?v=1785189177"},{"product_id":"taylor-made-46081-10-corner-mount-dock-bumper-white-marine-grade-vinyl-dock-guard","title":"Taylor Made 46081 Corner Mount Dock Bumper, White, 10 Inch x 10 Inch","description":"\u003cp\u003eThe Taylor Made 46081 is a corner mount dock bumper measuring 10 inches by 10 inches, built to protect the corner edges of a dock and the hull of a boat from impact damage. It is made from marine grade vinyl that provides cushioning at the point of contact while resisting the wear and weathering that comes with constant exposure to sun and water.\u003c\/p\u003e\u003cp\u003eThis bumper is finished in white, with the color permanently molded into the vinyl itself rather than applied as a surface coating or paint. Because the pigment runs through the material, the bumper will not transfer color onto a boat's hull the way a painted or coated fender can, keeping gelcoat and hull finishes clean during routine docking.\u003c\/p\u003e\u003cp\u003eThe corner mount design is intended for placement at the corner of a dock, where two dock faces meet and where impact risk is highest as boats approach or are moved along the slip. It supplements straight-run dock bumpers along flat dock edges, giving full coverage around the perimeter of a dock structure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 46081\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Corner mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 10 inches x 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.6 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made 46081 dock bumper?\u003c\/strong\u003e The Taylor Made 46081 measures 10 inches by 10 inches and is designed for corner mounting on a dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 46081 dock bumper come in?\u003c\/strong\u003e It is finished in white, with the color permanently molded into the marine grade vinyl rather than painted on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the white finish transfer onto my boat's hull?\u003c\/strong\u003e No. Because the color is molded through the vinyl of the Taylor Made 46081 rather than surface coated, it resists transferring onto a boat's hull during contact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made 46081 dock bumper made of?\u003c\/strong\u003e It is made from marine grade vinyl, chosen for its cushioning and resistance to sun and water exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 46081 dock bumper weigh?\u003c\/strong\u003e The Taylor Made 46081 weighs 1.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere on the dock should this bumper be installed?\u003c\/strong\u003e The 46081 is a corner mount bumper, meant for the corner of a dock where two dock faces meet, as opposed to a straight run along a flat edge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Taylor Made make a straight mount version of this bumper?\u003c\/strong\u003e Corner mount and straight mount dock bumpers are separate products in the Taylor Made lineup; the 46081 is specifically the corner mount, 10 inch by 10 inch version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 46081 suitable for both freshwater and saltwater docks?\u003c\/strong\u003e The marine grade vinyl construction of the Taylor Made 46081 is built to withstand ongoing water and sun exposure typical of dock environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the dock bumper come with mounting hardware in the box?\u003c\/strong\u003e The listing for the Taylor Made 46081 covers the vinyl corner bumper itself; hardware inclusion is not specified in the available product information.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an authentic Taylor Made product?\u003c\/strong\u003e Yes, the 46081 corner mount dock bumper is a genuine Taylor Made part, identified by manufacturer part number 46081.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989672702171,"sku":"NAT-46081","price":19.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31ZKhuOaO7L.jpg?v=1784486991"},{"product_id":"taylor-made-46076-dock-pro-vinyl-dock-bumper-10-x-10-corner-mount-black-1-1-4-cushion-boat-and-dock-protection","title":"Taylor Made 46076 Black Vinyl Dock Bumper, 10 Inch x 10 Inch Corner Mount","description":"\u003cp\u003eThe Taylor Made 46076 is a corner mount vinyl dock bumper measuring 10 inches by 10 inches, built to cushion the point of a dock where boats most often make contact. It is constructed from marine-grade vinyl, the same material Taylor Made uses in its boat fenders, so it holds up to sun, rain, and repeated impact without fading or cracking over time. A 1-1\/4 inch cushion covers both the top and sides of the dock corner, absorbing the blows a boat delivers while docking or when wind and current push a hull against a dock edge.\u003c\/p\u003e\u003cp\u003eThe bumper's black color is molded directly into the vinyl rather than painted on, so it will not transfer, scuff off, or rub onto a boat's hull. It mounts with solid flap-style straps that can be drilled and fastened with nails, screws, or finishing washers, and installation is a one-person job (mounting hardware is not included). The 46076 is designed for corner mounting only; it is not made to attach to a straight-mount bumper. Overall product dimensions are 12 inches deep by 10 inches wide by 4 inches high.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 46076\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Corner mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10 inches x 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCushion Thickness:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 12 inches D x 10 inches W x 4 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011460769\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e00040011455109\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made 46076 dock bumper?\u003c\/strong\u003e The Taylor Made 46076 is a corner mount dock bumper measuring 10 inches by 10 inches, with overall product dimensions of 12 inches deep by 10 inches wide by 4 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 46076 dock bumper made for a corner or a straight edge?\u003c\/strong\u003e It is a corner mount bumper, designed specifically to cushion a dock corner rather than a straight run of dock edge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 46076 be attached to a straight-mount Taylor Made bumper?\u003c\/strong\u003e No. The corner mount 46076 is not designed to attach to a straight mount bumper; the two styles are separate products meant to be installed independently.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options are available for this bumper?\u003c\/strong\u003e The 46076 is black, with the color molded into the vinyl itself so it will not transfer onto a boat hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Taylor Made 46076 dock bumper made from?\u003c\/strong\u003e It is made from marine-grade vinyl, the same durable material Taylor Made uses in its boat fenders, chosen to resist fading and hold up to sun and weather exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick is the cushioning on this dock bumper?\u003c\/strong\u003e The 46076 has a 1-1\/4 inch cushion that covers the top and sides of a dock corner to absorb impact from a docking boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 46076 dock bumper include mounting hardware?\u003c\/strong\u003e No, hardware is not included. The bumper has solid mounting flaps that can be attached with nails, screws, or finishing washers, and installation is a one-person job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made 46076 weigh?\u003c\/strong\u003e This corner mount dock bumper weighs 1.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the black finish on the 46076 rub off onto my boat?\u003c\/strong\u003e No. The black color is molded into the vinyl rather than coated on top, so it will not transfer to a boat's hull the way a painted finish might.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 46076 a genuine Taylor Made product?\u003c\/strong\u003e Yes, the 46076 is a genuine Taylor Made corner mount vinyl dock bumper, part number 46076.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made 46076 dock bumper?\u003c\/strong\u003e The UPC for the Taylor Made 46076 corner mount dock bumper is 040011460769.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989672767707,"sku":"NAT-46076","price":20.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61XpdXQ4lZL.jpg?v=1784486996"},{"product_id":"attwood-66510-7-flush-cleat-4-1-2-counter-sunk-316-stainless-steel-with-backing-plate","title":"Attwood 4-1\/2 Inch Flush Cleat, Countersunk, 316 Stainless Steel, Model 66510-7","description":"\u003cp\u003eThe Attwood 66510-7 is a 4-1\/2 inch countersunk flush cleat built from enhanced 316 stainless steel alloy for long-term durability in a marine environment. Unlike a fixed deck cleat that projects upward at all times, this flush-mount design recesses below the deck surface when not in use and is simply pulled up from its body when a line needs to be secured. Recessing the cleat below deck level reduces the chance of a snagged line, a stubbed toe, or a tripping hazard on walkways, swim platforms, and other high-traffic areas of a boat.\u003c\/p\u003e\u003cp\u003eConstruction is straightforward: the cleat body is countersunk into the mounting surface and the assembly includes a backing plate to reinforce the installation and spread the load across the mounting area. The simple mechanical design has few points of failure, which supports dependable, long-term operation in wet and corrosive conditions. The 316 stainless steel construction resists corrosion better than standard 304-grade hardware, making it well suited to saltwater use.\u003c\/p\u003e\u003cp\u003eThis is a countersunk flush cleat (as distinct from the stud-mount version), sized at 4-1\/2 inches. It is intended as a direct, drop-in replacement or new installation wherever a flush-mount deck cleat of this size and mounting style is required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 66510-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Flush Cleat - Counter Sunk\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 4-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Countersunk, flush mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Enhanced 316 Stainless Steel Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\/Color:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Backing plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.6138 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697665102\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Attwood 66510-7 flush cleat?\u003c\/strong\u003e The Attwood 66510-7 is a 4-1\/2 inch flush cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat surface-mount or flush-mount?\u003c\/strong\u003e The 66510-7 is a countersunk, flush-mount cleat that recesses below the deck surface rather than sitting on top of it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a flush cleat like this one operate?\u003c\/strong\u003e You simply pull the cleat up out of its recessed body to use it, then push it back down flush with the deck when the line is released.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 66510-7 made from?\u003c\/strong\u003e It is made from enhanced 316 stainless steel alloy, a grade chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 66510-7 come with a backing plate?\u003c\/strong\u003e Yes, the Attwood 66510-7 flush cleat includes a backing plate for the installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a flush cleat over a standard deck cleat?\u003c\/strong\u003e Because it recesses below the deck when not in use, the 66510-7 reduces the risk of snagged lines and tripping hazards compared with a cleat that stands upright at all times.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the countersunk or stud-mount version of the cleat?\u003c\/strong\u003e The 66510-7 is the countersunk version; a separate stud-mount version is offered under a different part number, so check your mounting style before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 66510-7?\u003c\/strong\u003e The UPC for the Attwood 4-1\/2 inch flush cleat, model 66510-7, is 022697665102.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 66510-7 weigh?\u003c\/strong\u003e The Attwood 66510-7 flush cleat weighs 1.6138 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill 316 stainless steel resist corrosion in saltwater?\u003c\/strong\u003e 316 stainless steel, used in the 66510-7 construction, offers better corrosion resistance than standard 304-grade stainless in saltwater conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Attwood 66510-7?\u003c\/strong\u003e The Attwood 66510-7 flush cleat ships with the cleat body and a backing plate for mounting.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989672800475,"sku":"ATT-66510-7","price":80.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51y0LytAfeL.jpg?v=1784487001"},{"product_id":"attwood-66517-7-neat-cleat-6-boat-rope-cleat-low-profile-line-securing-cleat","title":"Attwood Neat Cleat 6 Inch Boat Cleat for Ropes and Lines, Part Number 66517-7","description":"\u003cp\u003eThe attwood Neat Cleat 66517-7 is a compact, low-profile cleat designed to secure ropes and lines on your boat. Built for convenience, durability, and easy installation, this 6 inch cleat is sized for small to medium sized boats, giving you a reliable and hassle-free way to tie down your lines when docking or mooring. Its low-profile shape keeps the deck looking neat and tidy while still maintaining the strength and functionality needed for everyday line handling. The Neat Cleat weighs 2 pounds and installs where a traditional cleat would normally go, offering boat owners a cleaner-looking alternative without sacrificing holding power.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 66517-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Name:\u003c\/strong\u003e Neat Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697665171\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Cleats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the attwood Neat Cleat 66517-7 used for?\u003c\/strong\u003e The attwood Neat Cleat 66517-7 is used to secure ropes and lines on a boat, giving you a reliable way to tie down and dock your boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the attwood Neat Cleat 66517-7?\u003c\/strong\u003e This attwood cleat measures 6 inches, sized for small to medium sized boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the attwood Neat Cleat 66517-7 weigh?\u003c\/strong\u003e The attwood Neat Cleat 66517-7 weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the attwood Neat Cleat 66517-7 suitable for small boats?\u003c\/strong\u003e Yes, the Neat Cleat is designed for small to medium sized boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the attwood Neat Cleat have a low-profile design?\u003c\/strong\u003e Yes, the attwood 66517-7 has a low-profile design that keeps the deck looking neat and tidy while still maintaining strength and functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the attwood Neat Cleat 66517-7 easy to install?\u003c\/strong\u003e Yes, the attwood 66517-7 is designed for convenient, easy installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the attwood Neat Cleat 66517-7?\u003c\/strong\u003e The UPC for the attwood Neat Cleat 66517-7 is 022697665171.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cleats are included when you order the attwood 66517-7?\u003c\/strong\u003e The attwood Neat Cleat 66517-7 comes as a single unit, 1 cleat per order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the attwood Neat Cleat 66517-7 be used for docking and mooring lines?\u003c\/strong\u003e Yes, it provides a reliable and hassle-free way to tie down lines, making it suitable for docking and mooring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the compact design of the attwood 66517-7 sacrifice strength?\u003c\/strong\u003e No, despite its low-profile, compact shape, the attwood Neat Cleat 66517-7 maintains its strength and functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat part number should I order for the attwood Neat Cleat?\u003c\/strong\u003e Order part number 66517-7 to get the genuine attwood Neat Cleat.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989672833243,"sku":"ATT-66517-7","price":84.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61LO_wMow5L.jpg?v=1784487001"},{"product_id":"attwood-66514-7-6-counter-sunk-flush-cleat-316-stainless-steel-pull-up-boat-cleat","title":"Attwood 66514-7 Counter-Sunk Flush Cleat, 6 Inch, 316 Stainless Steel","description":"\u003cp\u003eThe Attwood 66514-7 Counter-Sunk Flush Cleat is a 6 inch pop-up deck cleat designed to sit flush with the deck surface instead of protruding like a traditional fixed cleat. When not in use, the cleat recesses into its cast body, eliminating a snag point for lines, feet, and gear on deck. To use it, simply pull the cleat up out of its housing; it is captured in the body with rubber seals and ball detents so it stays water-resistant and operates smoothly over repeated use. The cast body and cleat are built from 316 stainless steel using a patented design, giving it corrosion resistance suited to marine environments. Installation follows a standard four-hole mounting pattern, keeping the process straightforward for a deck-mounted cleat replacement or new install. An optional drainage receptacle is available to mount below the cleat to help route water away from the recess. This cleat is a good fit for boat owners who want dock and towing tie-off points without a raised cleat cluttering the deck or catching lines underfoot.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 66514-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Counter-Sunk Flush Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Standard four-hole mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal Type:\u003c\/strong\u003e Rubber seals with ball detents\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Pull-up flush\/recessed cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.0925 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697665140\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Cleats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Accessory:\u003c\/strong\u003e Drainage receptacle (mounts below cleat, sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Attwood 66514-7 cleat?\u003c\/strong\u003e The Attwood 66514-7 Counter-Sunk Flush Cleat is a 6 inch cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a flush cleat like this one work?\u003c\/strong\u003e You simply pull the cleat up out of its cast body to use it; the Attwood 66514-7 recesses back down flush with the deck when not in use, keeping the deck clear of a raised tie-off point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 66514-7 cleat made from?\u003c\/strong\u003e It is made from 316 stainless steel using a patented cast design, which gives the Attwood 66514-7 corrosion resistance for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat water-resistant?\u003c\/strong\u003e Yes, the cleat is captured in its body with rubber seals and ball detents that keep the recessed cleat water-resistant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Attwood 66514-7 mounted?\u003c\/strong\u003e It uses a standard four-hole mounting pattern for installation into the deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cleat come with a drainage option?\u003c\/strong\u003e An optional drainage receptacle is available that mounts below the Attwood 66514-7 cleat to help drain off water from the recess.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 66514-7 cleat weigh?\u003c\/strong\u003e The Attwood 66514-7 Counter-Sunk Flush Cleat weighs 2.0925 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a flush cleat over a standard fixed cleat?\u003c\/strong\u003e Because the Attwood 66514-7 recesses into the deck when not in use, it removes a protruding cleat horn that can otherwise catch lines or trip feet on deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 66514-7 cleat?\u003c\/strong\u003e The Attwood 66514-7 Counter-Sunk Flush Cleat is supplied as the complete cast cleat and body assembly with its rubber seals and ball detents.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this cleat?\u003c\/strong\u003e The Attwood 66514-7 Counter-Sunk Flush Cleat carries UPC 022697665140.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989672964315,"sku":"ATT-66514-7","price":83.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41JZ2TIJ4-L.jpg?v=1784487013"},{"product_id":"attwood-66515-7-neat-cleat-4-1-2-in-retractable-pull-up-boat-cleat-316-stainless-steel","title":"Attwood Neat Cleat Retractable Boat Cleat, 4-1\/2 Inch, 316 Stainless Steel","description":"\u003cp\u003eThe Attwood Neat Cleat is a retractable boat cleat with a thin profile designed to install easily in narrow gunwales. Unlike a fixed cleat, the stanchion folds down flush when not in use and pops up for docking or towing, so there is no permanent snag point to catch a line, a foot, or a dock fender. A friction spring holds the cleat up at any position, keeping it in place once raised, and the same spring lets it fold back down flat against the deck when you are finished.\u003c\/p\u003e\u003cp\u003eEach stanchion is a solid 7\/8 inch rod of enhanced #316 stainless steel, giving it a beautiful, continuous contour with no sharp edges to snag lines or stub toes. Installation is straightforward: drill two holes with an appropriately sized hole saw and mount the cleat in place. Drainage receptacles are included and press-fit onto the threaded studs underneath the cleat to capture any moisture that gets into the mounting holes and route it down to the bilge; the receptacle outlet is sized for standard 1\/4 inch pilot tubing (tubing not included). Attwood backs the Neat Cleat with a lifetime warranty against corrosion, reflecting the marine-grade stainless construction.\u003c\/p\u003e\u003cp\u003eThis is a universal-mount hardware item suitable for boat gunwales, decks, or docks wherever a low-profile, retractable cleat is preferred over a fixed horn cleat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 66515-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Retractable boat cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e #316 stainless steel (enhanced alloy)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 4-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 3-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight (lowered):\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStanchion Rod Diameter:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrainage Receptacle Outlet:\u003c\/strong\u003e Fits standard 1\/4 inch pilot tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Neat Cleat with press-fit drainage receptacles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty against corrosion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.75 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697665157\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood Neat Cleat 66515-7 used for?\u003c\/strong\u003e It is a retractable boat cleat that folds down flush with the deck or gunwale when not in use and pops up for securing dock lines or a tow line, making it a low-profile alternative to a fixed horn cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Attwood 66515-7 Neat Cleat?\u003c\/strong\u003e This Neat Cleat measures 4-1\/2 inches long by 1-1\/2 inches wide, with a depth of 3-1\/8 inches and a lowered height of 1-5\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Neat Cleat made from?\u003c\/strong\u003e The 66515-7 Neat Cleat's stanchion is a solid 7\/8 inch rod of enhanced #316 stainless steel, chosen for its corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cleat stay up on its own once raised?\u003c\/strong\u003e Yes, a friction spring inside the Attwood Neat Cleat holds the stanchion up at any position once it is pulled up, and the same spring lets it fold back down flat when finished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 66515-7 Neat Cleat installed?\u003c\/strong\u003e Installation only requires drilling two holes with an appropriately sized hole saw and mounting the cleat; no additional hardware modification is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Attwood Neat Cleat?\u003c\/strong\u003e Each 66515-7 Neat Cleat ships with press-fit drainage receptacles that attach to the threaded studs underneath the cleat; 1\/4 inch pilot tubing is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat do the drainage receptacles do?\u003c\/strong\u003e They press onto the threaded mounting studs of the Neat Cleat to catch any moisture that enters through the mounting holes and channel it down to the bilge through standard 1\/4 inch pilot tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood Neat Cleat covered by a warranty?\u003c\/strong\u003e Attwood backs the 66515-7 Neat Cleat with a lifetime warranty against corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 66515-7 Neat Cleat weigh?\u003c\/strong\u003e The Attwood Neat Cleat weighs 1.75 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Neat Cleat different from a standard fixed cleat?\u003c\/strong\u003e Unlike a fixed horn cleat that always protrudes above the deck, the 66515-7 Neat Cleat retracts flush with the mounting surface when not in use, reducing snag points for lines and feet while still providing a full stainless steel cleat when raised.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Neat Cleat fit in a narrow gunwale?\u003c\/strong\u003e Yes, the 66515-7 is designed with a thin profile specifically so it can be installed in narrow gunwales where a bulkier fixed cleat would not fit.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989673062619,"sku":"ATT-66515-7","price":82.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6169KR9Ar9L.jpg?v=1784487020"},{"product_id":"taylor-made-products-mw-140-standard-mooring-whip-14-ft-fixed-angle-base-for-boats-24-ft-to-28-ft-5-000-to-10-000-lbs","title":"Taylor Made Fixed Angle Mooring Whip MW.140, 14 Foot, Fits Boats 24 to 28 Feet","description":"\u003cp\u003eThe Taylor Made MW.140 is a 14 foot fixed angle base mooring whip built to hold a boat safely off the dock, cushioning it against pilings and dock edges caused by wave action, wakes, and changing tides. It uses a fixed angle fiberglass base design, which positions the whip at a set angle to keep the boat pushed away from the dock without the pivoting motion of a rocker arm base. The pole is constructed from sturdy fiberglass for durability in fresh or saltwater environments, and it incorporates a low friction tip along with a whip cleat that makes it easy for boarding boaters to retrieve and stow the whip.\u003c\/p\u003e\u003cp\u003eThe MW.140 is sized for boats 24 feet to 28 feet, with a rated capacity of 5,000 to 10,000 pounds. It is manufactured in the USA by Taylor Made, a marine brand that has been producing dock and mooring accessories for over 100 years. For larger boats, Taylor Made also offers a rocker arm base premium whip line under a different part number, so buyers should confirm boat length and weight before ordering to select the correct fixed angle MW.140 versus a rocker arm alternative.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MW.140\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Type:\u003c\/strong\u003e Fixed Angle Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhip Length:\u003c\/strong\u003e 14 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Length Fitment:\u003c\/strong\u003e 24 feet to 28 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Capacity:\u003c\/strong\u003e 5,000 to 10,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fiberglass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 84 x 5.25 x 5.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions (L x W x H):\u003c\/strong\u003e 94 x 6.9 x 5.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Mooring whip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011489630\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBoats 24 feet to 28 feet, 5,000 to 10,000 pounds\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat does the Taylor Made MW.140 mooring whip fit?\u003c\/strong\u003e The MW.140 is sized for boats 24 feet to 28 feet with a rated capacity of 5,000 to 10,000 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MW.140 a fixed angle or rocker arm mooring whip?\u003c\/strong\u003e The MW.140 uses a fixed angle base, which holds the whip at a set angle to push the boat away from the dock rather than pivoting like a rocker arm design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the MW.140 mooring whip made of?\u003c\/strong\u003e It is made of fiberglass, chosen for its strength and resistance to fresh and saltwater conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Taylor Made MW.140 whip?\u003c\/strong\u003e The MW.140 is a 14 foot mooring whip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MW.140 mooring whip weigh?\u003c\/strong\u003e The MW.140 weighs 23.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the item dimensions of the MW.140?\u003c\/strong\u003e The Taylor Made MW.140 measures 84 x 5.25 x 5.25 inches as assembled; its shipping package measures 94 x 6.9 x 5.6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MW.140 come with a retrieval cleat?\u003c\/strong\u003e Yes, the MW.140 incorporates a whip cleat along with a low friction tip to make retrieval easy for boarding boaters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MW.140 made in the USA?\u003c\/strong\u003e Yes, the Taylor Made MW.140 mooring whip is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the MW.140?\u003c\/strong\u003e The MW.140 order includes one mooring whip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the MW.140 and a rocker arm mooring whip?\u003c\/strong\u003e The MW.140 uses a fixed angle base for boats 24 to 28 feet and 5,000 to 10,000 pounds, while Taylor Made's rocker arm base whips are a different part number designed for larger boats with a pivoting arm rather than a fixed angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the MW.140 be used in saltwater?\u003c\/strong\u003e Yes, the fiberglass construction of the MW.140 is suited to both fresh and saltwater use.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989699670235,"sku":"NAT-MW-140","price":837.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71_zK7aF_QL.jpg?v=1784487420"},{"product_id":"taylor-made-pmw-1400-premium-mooring-whip-14-rocker-arm-base-for-boats-up-to-33-20-000-lbs","title":"Taylor Made Products Premium Mooring Whip PMW.1400, 14 ft Rocker Arm Base, Boats Up to 33 ft \/ 20,000 lbs","description":"\u003cp\u003eThe Taylor Made Products PMW.1400 Premium Mooring Whip is a 14 foot rocker arm base mooring whip built to hold your boat safely away from the dock when it is moored. The rocker arm base lets the whip flex and absorb the motion of wakes, wind, and tidal surge instead of transferring that stress directly into the boat and dock hardware, which is why Taylor Made recommends this style for high wake, high wind, and large tidal areas, including salt water. The pole is fiberglass for strength and corrosion resistance, and each whip incorporates a low friction tip along with a whip cleat that makes it easy to retrieve the pole when boarding.\u003c\/p\u003e\u003cp\u003eThe PMW.1400 is sized for boats up to 33 feet in length and up to 20,000 pounds. It ships as a single mooring whip unit (pole and rocker arm base assembly) and is intended to be paired with a second whip and standard dock or piling mounting hardware for a complete mooring setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PMW.1400\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Mooring Whip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Type:\u003c\/strong\u003e Rocker Arm Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Length:\u003c\/strong\u003e 14 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e Up to 33 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Boat Weight Capacity:\u003c\/strong\u003e Up to 20,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 35.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 88 x 7 x 5.8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fiberglass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Mooring whip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011489593\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoats up to 33 feet in length\u003c\/li\u003e\n\u003cli\u003eBoats up to 20,000 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Taylor Made PMW.1400 mooring whip designed for?\u003c\/strong\u003e The PMW.1400 Premium Mooring Whip is designed for boats up to 33 feet in length and up to 20,000 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the PMW.1400 use a rocker arm base or a fixed angle base?\u003c\/strong\u003e It uses a rocker arm base, which lets the 14 foot pole flex to absorb wake, wind, and tidal motion rather than transferring that force directly to the dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the PMW.1400 mooring whip pole made of?\u003c\/strong\u003e The pole on the Taylor Made PMW.1400 is fiberglass, chosen for its strength and resistance to corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the PMW.1400 mooring whip weigh?\u003c\/strong\u003e 35.5 pounds is the weight of the Taylor Made PMW.1400 Premium Mooring Whip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the shipping dimensions of the PMW.1400?\u003c\/strong\u003e The PMW.1400 mooring whip ships in a package measuring 88 x 7 x 5.8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when you order the PMW.1400?\u003c\/strong\u003e One mooring whip (the 14 foot rocker arm base pole assembly) is included per PMW.1400 unit; a complete mooring setup typically uses two whips plus separate mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a mooring whip do?\u003c\/strong\u003e A mooring whip like the PMW.1400 holds a boat off to the side of a dock or piling, keeping it away from pilings and dock structures to reduce rubbing and impact damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the PMW.1400 make it easy to retrieve the pole when boarding?\u003c\/strong\u003e Yes, the PMW.1400 has a low friction tip and a whip cleat built in specifically to make retrieving and securing the pole easier when boarding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PMW.1400 the premium or standard version of Taylor Made's 14 foot whip?\u003c\/strong\u003e PMW.1400 is the Premium 14 foot rocker arm base mooring whip in the Taylor Made lineup, sized for boats up to 33 feet and 20,000 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PMW.1400 suitable for salt water or tidal areas?\u003c\/strong\u003e Yes, the Taylor Made PMW.1400 is built for use in salt water and large tidal areas where wind, wake, and tide movement are significant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between a rocker arm base and a fixed angle base whip?\u003c\/strong\u003e The PMW.1400 uses a rocker arm base, which flexes with boat and wave motion, while a fixed angle base holds the pole at a set angle without that flex.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the pole on the PMW.1400?\u003c\/strong\u003e The Taylor Made PMW.1400 has a 14 foot pole.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989719363803,"sku":"NAT-PMW.1400","price":1158.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/91XRArkp9IS.jpg?v=1784487433"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/130-2_10.jpg?v=1785359976","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-docking-fendering-dock-hardware.oembed?page=2","provider":"Good Vibes Marina","version":"1.0","type":"link"}