{"title":"Docking \u0026 Fendering","description":null,"products":[{"product_id":"sea-dog-040104-1-open-base-cleat-4-inch-flat-head-hot-dipped-galvanized-cast-iron-pair-for-recreational-boats-and-docks","title":"Sea-Dog Hot Dipped Galvanized Cast Iron Flat Head Open Base Cleat, 4 Inch, Pair - 040104-1","description":"\u003cp\u003eThe Sea-Dog 040104-1 is a 4 inch flat head open base cleat constructed of hot dipped galvanized cast iron for corrosion resistance in marine environments. It is designed for use on smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications. The open base, flat head design allows the cleat to sit low and flush against the mounting surface, giving dock lines and mooring lines a secure, snag-resistant tie-off point. This listing is for a matched pair of cleats, each installed with two flat head thru-bolts (not included). The hot dip galvanizing process bonds a protective zinc coating to the cast iron body, helping the cleat resist rust and saltwater corrosion over repeated exposure. Sized specifically at the 4 inch length, this cleat uses a #10 flat head fastener and fits the corresponding bolt-hole dimensions listed below. Sea-Dog offers this same open base cleat design in multiple sizes (3-1\/2 inch through 14 inch), so boat owners can match cleat size to boat length and line diameter. Choose the 040104-1 when a compact, budget-friendly, corrosion-resistant cleat pair is needed for smaller boats, tenders, jon boats, and residential or recreational docks.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040104-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Hot Dipped Galvanized Cast Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hot Dipped Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Two flat head thru-bolts required (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.498 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5 x 4 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514040020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eIntended for smaller recreational boats and recreational docks; not recommended for large boats or commercial applications.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 040104-1 cleat?\u003c\/strong\u003e The Sea-Dog 040104-1 is a 4 inch flat head open base cleat, measured as the primary length dimension of the cleat body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat sold as a single unit or a pair?\u003c\/strong\u003e The 040104-1 is sold as a pair of two matching cleats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 040104-1 cleat made from?\u003c\/strong\u003e It is made of hot dipped galvanized cast iron, which provides corrosion resistance for marine and dockside use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used on large boats or commercial vessels?\u003c\/strong\u003e No. The 040104-1 flat head open base cleat is designed for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener size does the 040104-1 use?\u003c\/strong\u003e This cleat uses a #10 flat head fastener and installs with two flat head thru-bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting bolts included with the 040104-1?\u003c\/strong\u003e No, the two flat head thru-bolts needed to install the Sea-Dog 040104-1 cleat are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 040104-1 cleat pair weigh?\u003c\/strong\u003e The Sea-Dog 040104-1 pair weighs 0.498 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the key dimensions of the 040104-1 cleat?\u003c\/strong\u003e The 040104-1 measures 4 inches (A), with additional body dimensions of 1-1\/8 inches (B), 7\/8 inch (C), and 1-7\/8 inches (D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is it called an open base cleat?\u003c\/strong\u003e The 040104-1 has an open base, flat head design that sits low against the mounting surface, which is characteristic of Sea-Dog's flat head open base cleat line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 040104-1 and other sizes in this cleat line?\u003c\/strong\u003e The 040104-1 is the 4 inch size in Sea-Dog's flat head open base cleat family, which also includes 3-1\/2 inch, 5 inch, 6 inch, 8 inch, 10 inch, 12 inch, and 14 inch versions with correspondingly larger dimensions and fastener sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 040104-1 cleat pair?\u003c\/strong\u003e The UPC for this Sea-Dog 4 inch open base cleat pair is 035514040020.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 040104-1 corrode in saltwater?\u003c\/strong\u003e The hot dipped galvanized cast iron construction of the 040104-1 is corrosion resistant, making it suitable for saltwater and marine dock environments.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543221979,"sku":"S-D-040104-1","price":6.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3956.jpg?v=1784421515"},{"product_id":"sea-dog-cl209-midi-clamcleat-nylon-rope-cleat-for-5-32-to-5-16-in-4-8-mm-line-mpn-002090-1","title":"Sea-Dog CL209 Clamcleat Midi Rope Cleat for 3\/16 to 5\/16 Inch Rope, Black Aluminum","description":"\u003cp\u003eThe Sea-Dog CL209 Clamcleat Midi is a cam-style rope cleat designed to grip and hold line under load without the need to wrap or tie off, letting you release rope instantly with a simple upward pull. Sized for rope diameters from 3\/16 inch to 5\/16 inch, it is well suited to halyards, sheets, fender lines, and other running rigging on small to mid-size boats where quick, one-handed cleating is useful. The cleat body is cast from aluminum and finished in black, giving it a low-profile look that blends in with dark hardware and trim.\u003c\/p\u003e\u003cp\u003eUnlike a traditional horn cleat, the clamcleat design uses angled teeth to bite the rope automatically as tension is applied, then releases cleanly when the line is pulled up and out of the jaw. This makes it a practical upgrade anywhere fast, repeated cleating and uncleating is needed. The unit measures 2-7\/8 inches in length with a 2-1\/8 inch inside length and a 3\/4 inch width, and it mounts with 3\/16 inch screws (not included) through the base.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 002090-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Clamcleat Midi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Diameter Range:\u003c\/strong\u003e 3\/16 inch to 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 2-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Length:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Size:\u003c\/strong\u003e 3\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.052 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rope does the Sea-Dog CL209 fit?\u003c\/strong\u003e The Sea-Dog CL209 Clamcleat Midi is designed for rope diameters from 3\/16 inch to 5\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a Clamcleat rope cleat work?\u003c\/strong\u003e It uses angled teeth inside the cleat jaw that bite down on the rope automatically as tension is applied, holding the line without wrapping or tying it off; pulling the rope up and out of the jaw releases it instantly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the CL209 made from?\u003c\/strong\u003e The CL209 cleat body is aluminum, finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this cleat?\u003c\/strong\u003e The Sea-Dog CL209 measures 2-7\/8 inches in length and 3\/4 inch in width, with an inside length of 2-1\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat screw size is needed to mount the CL209?\u003c\/strong\u003e It mounts using 3\/16 inch screws, which are not included with part number 002090-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CL209 weigh?\u003c\/strong\u003e This cleat weighs 0.052 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CL209 a locking cleat?\u003c\/strong\u003e Yes, in effect: the cam-style jaw grips the rope under load so it stays cleated without needing to be tied, and releases only when the rope is pulled clear of the teeth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this cleat?\u003c\/strong\u003e The part is Sea-Dog 002090-1, also known as the CL209 Midi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the CL209 come in?\u003c\/strong\u003e It is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this cleat typically used for on a boat?\u003c\/strong\u003e Because it grips and releases rope quickly without tying off, the CL209 Midi suits applications like halyards, sheets, and fender lines where fast, one-handed cleating is helpful.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CL209 come with mounting hardware?\u003c\/strong\u003e No, the Sea-Dog CL209 (002090-1) requires 3\/16 inch mounting screws that are sold separately.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543254747,"sku":"S-D-002090-1","price":6.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6242.jpg?v=1784421536"},{"product_id":"sea-dog-040105-1-flat-head-open-base-cleat-5-in-hot-dipped-galvanized-cast-iron-pair","title":"Sea-Dog Flat Head Open Base Cleat, 5 Inch, Galvanized Cast Iron","description":"\u003cp\u003eThe Sea-Dog 5 inch Flat Head Open Base Cleat is a hot dipped galvanized cast iron dock and deck cleat designed for smaller recreational boats and recreational docks. Its open base and flat head design give it a low profile that lies flatter against the mounting surface than a raised-base cleat, making it easy to walk over and less likely to snag lines or feet on deck. The corrosion resistant hot dipped galvanizing protects the cast iron body against the marine environment, holding up to saltwater spray and everyday dock use.\u003c\/p\u003e\u003cp\u003eThis cleat installs with two flat head thru-bolts sized for a #12 fastener (bolts not included), so hardware is countersunk for a clean, snag-free finish. It measures 5 inches overall (A), with a base footprint of 1-5\/16 inches (B) by 1-1\/16 inches (C) and an overall width of 2-3\/16 inches (D), giving a compact profile suited to smaller craft and dock applications. Sea-Dog notes this cleat is not recommended for large boats or commercial applications, so it is best matched to recreational boats and residential dock hardware where a smaller, lighter-duty cleat is appropriate.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040105-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #12 Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Two flat head thru-bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Hot Dipped Galvanized Cast Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.646 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each \/ 10 pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514040037\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRecommended Use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSmaller recreational boats and recreational docks\u003c\/li\u003e\n\u003cli\u003eNot recommended for large boats or commercial applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 040105-1 cleat?\u003c\/strong\u003e The Sea-Dog 040105-1 measures 5 inches overall in length, with a base footprint of 1-5\/16 inches by 1-1\/16 inches and an overall width of 2-3\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e It is made from hot dipped galvanized cast iron, which resists corrosion in marine and dockside environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with the 040105-1 cleat?\u003c\/strong\u003e No. The Sea-Dog 040105-1 installs with two flat head thru-bolts sized for a #12 fastener, but the bolts themselves are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat rated for large boats?\u003c\/strong\u003e No, Sea-Dog states this flat head open base cleat is designed for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'open base' mean for this cleat design?\u003c\/strong\u003e An open base cleat, like the Sea-Dog 040105-1, has an open area beneath the horns rather than a solid base plate, which is the standard low-profile flat head cleat style used on smaller boats and docks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 040105-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog 040105-1 weighs 0.646 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cleats come in a package?\u003c\/strong\u003e The 040105-1 is packed in a standard pack of 10 each or 10 pairs, though individual listings may sell it in smaller quantities.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used on a dock instead of a boat?\u003c\/strong\u003e Yes, Sea-Dog specifies this cleat for use on both smaller recreational craft and recreational docks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener size does the 040105-1 use?\u003c\/strong\u003e This cleat uses a #12 flat head fastener for its two mounting thru-bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cleat have a UPC for retail tracking?\u003c\/strong\u003e Yes, the Sea-Dog 040105-1 5 inch cleat carries UPC 035514040037.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543385819,"sku":"S-D-040105-1","price":7.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3956_ee533315-5bac-433a-a08c-739216ca85e1.jpg?v=1784421620"},{"product_id":"sea-dog-040108-1-flat-head-open-base-cleat-8-hot-dipped-galvanized-cast-iron-dock-cleat","title":"Sea-Dog 040108-1 Flat Head Open Base Cleat, 8 Inch, Galvanized Cast Iron","description":"\u003cp\u003eThe Sea-Dog 040108-1 is an 8 inch Flat Head Open Base Cleat built for securing dock lines on smaller recreational boats and recreational docks. It is cast from corrosion resistant hot dipped galvanized cast iron, giving it long-term resistance to rust and saltwater exposure while keeping a traditional open-base look that lets water drain away rather than pooling under the cleat. The flat head design sits low against the mounting surface, and the open base makes it easy to wrap and cleat off dock lines quickly.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the 040108-1 mounts with two flat head thru-bolts (not included), passing through 5\/16 inch bolt holes for a secure, low-profile fit. Sea-Dog notes this cleat is intended for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications, so it is best suited for runabouts, small cruisers, pontoons, jon boats, and residential dock installations rather than heavy-duty commercial mooring.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040108-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Hot dipped galvanized cast iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Length:\u003c\/strong\u003e 3-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThru-Bolt Hole Diameter:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Two flat head thru-bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.184 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Smaller recreational craft and recreational docks; not recommended for large boats or commercial applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514040051\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 040108-1 cleat made of?\u003c\/strong\u003e The 040108-1 is constructed of corrosion resistant hot dipped galvanized cast iron, which resists rust in saltwater and freshwater dock environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this cleat?\u003c\/strong\u003e The Sea-Dog 040108-1 measures 8 inches overall in length, with a base width of 2-1\/8 inches and a height of 1-11\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size bolts do I need to mount this cleat?\u003c\/strong\u003e The 040108-1 has thru-bolt holes sized at 5\/16 inch and installs with two flat head thru-bolts, which are not included with the cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat rated for large boats or commercial use?\u003c\/strong\u003e No. The Sea-Dog 040108-1 is designed for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'open base' mean for this cleat design?\u003c\/strong\u003e An open base cleat like the 040108-1 has a hollow underside rather than a solid base, which allows water to drain away instead of collecting underneath the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cleat come with mounting hardware?\u003c\/strong\u003e No, the Sea-Dog 040108-1 requires two flat head thru-bolts for installation, and these bolts are not included in the package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 040108-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog 040108-1 weighs 1.184 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'flat head' refer to on this cleat?\u003c\/strong\u003e Flat head describes the low-profile design of the 040108-1, where the cleat sits close to the mounting surface rather than standing up on raised horns or a pedestal base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 040108-1 sold as a single cleat or in a set?\u003c\/strong\u003e The Sea-Dog 040108-1 is sold individually (per each), with a standard case pack of 10 each for retailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat rust over time in saltwater?\u003c\/strong\u003e The 040108-1 is hot dipped galvanized cast iron, a finish specifically chosen for corrosion resistance in marine environments, though like any iron product it should be inspected periodically for wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the base footprint of the 040108-1 cleat?\u003c\/strong\u003e The Sea-Dog 040108-1 has a base length of 3-1\/4 inches, sized to match its 8 inch overall length and 2-1\/8 inch base width.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543451355,"sku":"S-D-040108-1","price":9.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3956_284245e1-17a1-4534-a41d-6e7aad6c75ab.jpg?v=1784421625"},{"product_id":"sea-dog-040106-1-flat-head-open-base-cleat-6-inch-hot-dipped-galvanized-cast-iron-dock-cleat","title":"Sea-Dog 040106-1 Flat Head Open Base Cleat, 6 Inch, Galvanized Cast Iron","description":"\u003cp\u003eThe Sea-Dog 040106-1 is a 6 inch flat head open base cleat built for securing docking and mooring lines on smaller recreational craft and recreational docks. It is constructed of cast iron with a hot dipped galvanized finish that resists corrosion in wet marine environments, giving it a durable silver finish that holds up to repeated line loading and weather exposure. The open base design allows lines to be wrapped and cleated off quickly, while the flat head profile sits low against the mounting surface for a clean, low-profile installation. This cleat installs with two flat head thru-bolts (not included), which pass through the mounting holes sized for 1\/4 inch hardware. It is sold as a single cleat. Sea-Dog specifies this model for use on smaller recreational boats and recreational docks and does not recommend it for large boats or commercial applications, so buyers should size their line loads accordingly. Sea-Dog Line has manufactured marine hardware since 1933 and has received multiple industry awards for quality and efficiency. This part number, 040106-1, corresponds to the 6 inch size within Sea-Dog's flat head open base cleat lineup, which also includes 3-1\/2 inch, 4 inch, 5 inch, 8 inch, 10 inch, 12 inch, and 14 inch versions for different boat and dock sizes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040106-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Length:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Hole Spacing:\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Hole Diameter:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Style:\u003c\/strong\u003e Open Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hot Dipped Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7.88 x 3.88 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.878 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Two flat head thru-bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Smaller recreational boats and recreational docks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514040044\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 040106-1 cleat?\u003c\/strong\u003e The Sea-Dog 040106-1 is 6 inches in overall length, with a base length of 1-1\/4 inches and a bolt hole spacing of 2-3\/16 inches, making it one of the mid-size options in Sea-Dog's flat head open base cleat lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this cleat made of?\u003c\/strong\u003e It is made of cast iron with a hot dipped galvanized finish, which gives the 040106-1 corrosion resistance for use in wet marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 040106-1 cleat come with mounting bolts?\u003c\/strong\u003e No, the Sea-Dog 040106-1 installs with two flat head thru-bolts sized for its 1\/4 inch bolt holes, but the bolts themselves are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat rated for large boats or commercial use?\u003c\/strong\u003e No. Sea-Dog specifies the 040106-1 flat head open base cleat for use on smaller recreational craft and recreational docks, and it is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 040106-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog 040106-1 flat head open base cleat weighs 0.878 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'open base' mean on this cleat?\u003c\/strong\u003e An open base cleat has a gap beneath the horns rather than a solid base plate, which is the design used on the Sea-Dog 040106-1 and lets dock lines be wrapped and cleated off quickly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does this cleat have?\u003c\/strong\u003e The 040106-1 has a silver, hot dipped galvanized finish over its cast iron construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 040106-1 sold as a single cleat or a pair?\u003c\/strong\u003e It is sold as a single cleat; the Sea-Dog 040106-1 is not packaged as a matched pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size bolts does the 040106-1 cleat need?\u003c\/strong\u003e The mounting holes on the Sea-Dog 040106-1 are sized for 1\/4 inch flat head thru-bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this cleat's packaging or footprint?\u003c\/strong\u003e The Sea-Dog 040106-1 measures 7.88 x 3.88 x 1.5 inches overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other sizes of this same cleat available?\u003c\/strong\u003e Yes, Sea-Dog makes this flat head open base cleat in several other lengths, including 3-1\/2 inch, 4 inch, 5 inch, 8 inch, 10 inch, 12 inch, and 14 inch versions, each under its own part number; the 040106-1 is the 6 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes the 040106-1 cleat and how long has the company been in business?\u003c\/strong\u003e The 040106-1 is made by Sea-Dog Line, a family-owned marine hardware manufacturer that has been in business since 1933.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543484123,"sku":"S-D-040106-1","price":7.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3956_19b9baa7-d8c9-4ffb-a3ff-98aa5a6a8e1e.jpg?v=1784421626"},{"product_id":"sea-dog-040112-flat-head-open-base-cleat-12-in-hot-dipped-galvanized-cast-iron-dock-cleat","title":"Sea-Dog Flat Head Open Base Cleat, 12 Inch, Hot-Dipped Galvanized Cast Iron","description":"\u003cp\u003eThe Sea-Dog 040112 is a 12 inch flat head open base cleat built for securing dock lines on smaller recreational craft and recreational docks. It is cast from corrosion resistant hot dipped galvanized cast iron, giving it a durable finish that stands up to marine environments while keeping the classic open base cleat profile that lets lines run cleanly across the horns. The flat head design sits low and installs flush using two flat head thru-bolts (not included), which pass through the mounting holes for a secure, low-profile hold on the deck or dock surface. This cleat is intended for smaller recreational boats and recreational docks and is not recommended for large boats or commercial applications. Each unit measures 12 inches overall and is packed 5 to a standard pack. With its galvanized finish and cast iron construction, the Sea-Dog 040112 offers a reliable, corrosion resistant mounting point for dock lines, fender lines, and general tie-off duty on smaller vessels and dock structures.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e 3\/8 inch flat head thru-bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Style:\u003c\/strong\u003e Open Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hot-dipped galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514040129\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Smaller recreational boats and recreational docks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Recommended For:\u003c\/strong\u003e Large boats or commercial applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 040112 cleat?\u003c\/strong\u003e The Sea-Dog 040112 is a 12 inch open base cleat, measured overall length from horn to horn.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 040112 cleat made of?\u003c\/strong\u003e It is cast from corrosion resistant hot dipped galvanized cast iron, which gives the Sea-Dog 040112 its durable, weather resistant finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 040112 cleat come with mounting bolts?\u003c\/strong\u003e No, the Sea-Dog 040112 installs with two flat head thru-bolts sized 3\/8 inch, but the bolts themselves are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat rated for large boats?\u003c\/strong\u003e No. The 040112 flat head open base cleat is designed for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat head style is the 040112 cleat?\u003c\/strong\u003e It uses a flat head design, meaning the mounting holes are countersunk so the thru-bolts sit flush with the cleat base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is an open base cleat?\u003c\/strong\u003e An open base cleat, like the Sea-Dog 040112, has a base with a gap beneath the horns rather than a solid closed base, allowing lines to be led underneath as well as around the horns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cleats come in a package?\u003c\/strong\u003e The Sea-Dog 040112 is packed 5 to a standard pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 040112 cleat weigh?\u003c\/strong\u003e The Sea-Dog 040112 weighs 3.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat rust over time?\u003c\/strong\u003e The hot dipped galvanized finish on the Sea-Dog 040112 is corrosion resistant, which helps protect the cast iron base from rust in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 040112 cleat?\u003c\/strong\u003e The UPC for the Sea-Dog 040112 flat head open base cleat is 035514040129.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 040112 cleat be used on a dock?\u003c\/strong\u003e Yes, the Sea-Dog 040112 is intended for use on recreational docks as well as smaller recreational boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 040112 cleat different from the smaller sizes in the line?\u003c\/strong\u003e The 040112 is the 12 inch version in Sea-Dog's flat head open base cleat range, which also includes 6, 8, 10, and 14 inch sizes with correspondingly larger dimensions and thru-bolt sizes as the cleat length increases.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543516891,"sku":"S-D-040112","price":16.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3956_9a014dc6-07eb-4a18-8a55-f480373d417f.jpg?v=1784421636"},{"product_id":"sea-dog-041404-1-folding-stud-mount-cleat-4-1-2-in-investment-cast-316-stainless-steel","title":"Sea-Dog Folding Stud Mount Cleat 041404-1, 4-1\/2 Inch, 316 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog Folding Stud Mount Cleat (041404-1) is a highly polished investment cast 316 stainless steel cleat designed to lock down flat against the deck when not in use and flip back up when it is time to tie off. This folding action keeps the deck clear of a permanently upright cleat that could snag lines, sails, or feet when the boat is underway or at rest.\u003c\/p\u003e\u003cp\u003eThe cleat uses a surface mount, stud mount design, so no drain tubes or receptacles are required to prevent leaks into the deck below. Installation is straightforward: two standard bit size holes are drilled for the mounting studs, eliminating the need for cutouts or hole saws. The stud mounted fasteners are hidden beneath the deck surface, giving the topside an attractive, flush appearance with no visible bolt heads.\u003c\/p\u003e\u003cp\u003eConstructed of corrosion resistant investment cast 316 stainless steel and finished with a high polish, this cleat is built to stand up to a marine environment while maintaining a clean, finished look. It is sized for 4-1\/2 inch base applications and secures with a 1\/4 inch-20 NC threaded fastener.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041404-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Folding Stud Mount Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface Mount \/ Stud Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 6-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 4-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension F:\u003c\/strong\u003e 2-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 1\/4 inch-20 NC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.81 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 10 x 5.81 x 2.38 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041607\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 041404-1 cleat made of?\u003c\/strong\u003e The Sea-Dog 041404-1 Folding Stud Mount Cleat is made of investment cast 316 stainless steel with a highly polished finish, giving it strong corrosion resistance for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cleat fold down when not in use?\u003c\/strong\u003e Yes, the 041404-1 folding cleat locks down flat against the deck when not needed and flips back up when it is time to tie off a line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog folding cleat mounted?\u003c\/strong\u003e It is a surface mount, stud mount cleat installed through two standard bit size holes drilled for the studs, so no cutouts or hole saws are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre drain tubes or receptacles needed to install this cleat?\u003c\/strong\u003e No. Because the 041404-1 is a surface mount cleat, no drain tubes or receptacles are required to prevent leaks at the mounting holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the mounting hardware be visible after installation?\u003c\/strong\u003e No, the stud mounted fasteners on the Sea-Dog 041404-1 cleat are hidden beneath the deck, leaving a clean, flush appearance on top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size cleat is the 041404-1?\u003c\/strong\u003e The 041404-1 measures 6-7\/16 inches (dimension A) by 4-1\/2 inches (dimension B), with a height of 2-1\/8 inches (dimension C).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener size does this cleat use?\u003c\/strong\u003e The Sea-Dog 041404-1 folding cleat uses a 1\/4 inch-20 NC threaded stud fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cleat weigh?\u003c\/strong\u003e The Sea-Dog Folding Stud Mount Cleat 041404-1 weighs 0.81 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat resistant to corrosion in saltwater?\u003c\/strong\u003e Yes, it is constructed of investment cast 316 stainless steel, which is corrosion resistant and suited to marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 041404-1 come in different sizes?\u003c\/strong\u003e The 041404-1 is the 4-1\/2 inch (dimension B) size in Sea-Dog's folding stud mount cleat line, which also includes larger cleats using 5\/16 inch-18 NC and 3\/8 inch-16 NC fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Sea-Dog 041404-1 cleat have?\u003c\/strong\u003e It has a highly polished finish over the investment cast 316 stainless steel body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sea-Dog 041404-1 cleat?\u003c\/strong\u003e Each Sea-Dog 041404-1 Folding Stud Mount Cleat is a single cleat unit with its stud mount fasteners.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543615195,"sku":"S-D-041404-1","price":51.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7463.jpg?v=1784421665"},{"product_id":"sea-dog-040110-flat-head-open-base-dock-cleat-10-in-hot-dipped-galvanized-cast-iron","title":"Sea-Dog Flat Head Open Base Cleat 040110, 10 Inch, Galvanized Cast Iron","description":"\u003cp\u003eThe Sea-Dog 040110 is a 10 inch flat head open base cleat built for securing dock lines and mooring lines on smaller recreational boats and recreational docks. It is constructed of corrosion resistant hot dipped galvanized cast iron, giving it the strength of cast iron with a protective galvanized finish that resists rust and corrosion in wet marine environments. The open base design allows lines to be wrapped and cleated off quickly, while the low-profile flat head shape keeps the cleat from becoming a snag point on deck or dock surfaces.\u003c\/p\u003e\u003cp\u003eThis cleat installs with two flat head thru-bolts (not included), which pass through the base and seat flush for a clean, secure mount. At 10 inches overall length, the 040110 sits in the middle of Sea-Dog's flat head open base cleat lineup, sized for boats and dock applications that need more holding capacity than the smaller 5, 6, and 8 inch versions but do not require the largest 12 or 14 inch sizes. Sea-Dog notes this cleat is intended for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Cast Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hot Dipped Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Style:\u003c\/strong\u003e Open Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Length:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width:\u003c\/strong\u003e 2-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height:\u003c\/strong\u003e 4-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Hole Diameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Installs with two flat head thru-bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514040112\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 040110 cleat?\u003c\/strong\u003e The 040110 measures 10 inches in overall length, with a base of 2-1\/2 inches by 2-3\/8 inches and an overall height of 4-1\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 040110 cleat made of?\u003c\/strong\u003e It is made of hot dipped galvanized cast iron, which combines the strength of cast iron with a galvanized finish that resists rust and corrosion in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 040110 come with mounting bolts?\u003c\/strong\u003e No, the 040110 installs with two flat head thru-bolts, and the bolts are not included with the cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size bolts does this cleat use?\u003c\/strong\u003e The 040110 has a bolt hole diameter of 3\/8 inch for its two flat head thru-bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 10 inch Sea-Dog cleat weigh?\u003c\/strong\u003e The Sea-Dog 040110 flat head open base cleat weighs 2.13 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 040110 cleat suitable for large boats?\u003c\/strong\u003e No, Sea-Dog states this flat head open base cleat is intended for smaller recreational craft and recreational docks and is not recommended for large boats or commercial applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is an open base cleat used for?\u003c\/strong\u003e An open base cleat like the 040110 is used to secure dock lines and mooring lines, with an open design under the horns that makes it easy to wrap and cleat off a line quickly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a flat head cleat instead of a horn cleat with a raised base?\u003c\/strong\u003e The flat head design of the 040110 keeps the cleat low profile against the mounting surface, reducing the chance of the base catching lines or gear on deck or dock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many 040110 cleats come in a package?\u003c\/strong\u003e The Sea-Dog 040110 has a standard pack quantity of 10 each and is also sold individually per each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 040110 different from the smaller Sea-Dog flat head cleats?\u003c\/strong\u003e Yes, the 040110 is the 10 inch size in Sea-Dog's flat head open base cleat line, which also includes 5, 6, 8, 12, and 14 inch versions with correspondingly different base dimensions and weights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Sea-Dog 040110 be used outdoors in saltwater environments?\u003c\/strong\u003e Yes, the hot dipped galvanized finish on the 040110 is corrosion resistant, making it suitable for exposed marine and dock environments.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543647963,"sku":"S-D-040110","price":11.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3956_46f665b8-cbeb-4cee-b5e8-bf38fc2d7873.jpg?v=1784421668"},{"product_id":"sea-dog-041604-1-open-base-cleat-4-inch-investment-cast-316-stainless-steel","title":"Sea-Dog 041604-1 Open Base Cleat, 4 Inch, 316 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog 041604-1 is a 4 inch open base cleat built for reliable line tie-off on deck, dock, or hull. It is investment cast from 316 stainless steel, a grade chosen for its resistance to corrosion in saltwater and marine environments, so the cleat holds its finish and strength through repeated exposure to spray and sun. The open base, classic horn design gives boaters a simple, low-profile fitting for securing dock lines, fenders, and rigging. It installs with four flathead thru-bolts sized for #10 fasteners (fasteners are sold separately). Sold individually, this 4 inch size is one of a full range of Sea-Dog open base cleats, so boat owners can match cleat size to line diameter and deck space across the vessel. The gray stainless finish suits both classic and modern boat styling.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041604-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 15\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen Base Width (C):\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 flathead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.22 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface mount, open base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each (sold individually)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041072\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal mounting cleat; not model or engine specific.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers apply to this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 041604-1 cleat?\u003c\/strong\u003e The 041604-1 is the 4 inch open base cleat, measuring 4 inches overall in length with a 1-3\/4 inch open base width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e It is investment cast from 316 stainless steel, a corrosion-resistant grade suited to saltwater and marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install the 041604-1 cleat?\u003c\/strong\u003e Installation uses four flathead thru-bolts sized for #10 fasteners; the fasteners are not included with the cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 041604-1 an open base or closed base cleat?\u003c\/strong\u003e This is an open base cleat, with an open base width of 1-3\/4 inches, giving a classic tie-off style rather than a solid base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 4 inch Sea-Dog cleat weigh?\u003c\/strong\u003e The Sea-Dog 041604-1 weighs 0.22 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 041604-1 come with mounting hardware?\u003c\/strong\u003e No, the four #10 flathead thru-bolts required for mounting are sold separately from the 041604-1 cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat sold individually or in a set?\u003c\/strong\u003e The 041604-1 is sold individually, one cleat per unit, though it is packed in standard quantities of 10 for bulk distribution.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does the 041604-1 have?\u003c\/strong\u003e This cleat has a gray stainless steel finish, consistent with its 316 stainless construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other sizes are available besides the 4 inch open base cleat?\u003c\/strong\u003e The 041604-1 is the 4 inch version of Sea-Dog's open base cleat line, which also includes 5, 6, 8, 10, and 12 inch sizes in the same 316 stainless construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill 316 stainless steel resist rust on this cleat?\u003c\/strong\u003e Yes, the 041604-1 is investment cast from 316 stainless steel specifically for corrosion resistance in marine and saltwater conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 041604-1 suitable for both deck and dock mounting?\u003c\/strong\u003e Yes, this open base cleat is a general-purpose surface-mount fitting suitable for deck, dock, or hull installation wherever line tie-off is needed.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543680731,"sku":"S-D-041604-1","price":21.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3964.jpg?v=1784421670"},{"product_id":"sea-dog-041426-pull-up-cleat-6-1-4-flush-mount-investment-cast-316-stainless-steel-boat-cleat-with-hidden-studs","title":"Sea-Dog Pull-Up Cleat, 5-3\/4 Inch, 316 Stainless Steel Flush Mount Deck Cleat with Studs","description":"\u003cp\u003eThis Sea-Dog Pull-Up Cleat is a flush-mount deck cleat that recesses into the deck surface for a clean, contemporary look when not in use. It is investment cast from 316 stainless steel, giving it strong corrosion resistance for marine environments. The cleat uses stud-mounted fasteners that are hidden from view once installed, so there is no visible hardware on the deck surface. The mounting studs are sized to accept an optional drain fitting, allowing water that collects in the recessed cleat pocket to drain down to the bilge instead of pooling on deck.\u003c\/p\u003e\u003cp\u003eThis is the 5-3\/4 inch bulk-pack version of the cleat (part number 041426). A matching backing plate and drain fitting are available as separate accessories for this cleat size. Bulk-pack cleats do not include the backing plate; that plate is only bundled with the display-packaged version of this cleat line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041426\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment cast 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Pull-up flush deck cleat with hidden stud mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 6-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 5-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 7\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension F:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.75 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack Quantity:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041515\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Backing Plate:\u003c\/strong\u003e 041486 (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Drain Fitting:\u003c\/strong\u003e 041596 (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this Sea-Dog pull-up cleat?\u003c\/strong\u003e The Sea-Dog Pull-Up Cleat, part number 041426, measures 6-1\/4 inches by 5-3\/4 inches overall, with a height of 1-3\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 041426 cleat made from?\u003c\/strong\u003e It is investment cast from 316 stainless steel, a marine-grade alloy chosen for its corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cleat sit flush with the deck?\u003c\/strong\u003e Yes, this is a pull-up style cleat designed to recess flush into the deck when not in use, giving a clean, uncluttered deck surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the mounting fasteners visible on the 041426 cleat?\u003c\/strong\u003e No, part number 041426 uses stud-mounted fasteners that are hidden once the cleat is installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 041426 cleat include a backing plate?\u003c\/strong\u003e No, this bulk-pack version of the cleat does not include a backing plate. The matching backing plate for this cleat size is part number 041486 and is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan water drain out of this cleat pocket?\u003c\/strong\u003e Yes, the studs on the 041426 cleat will accept an optional drain fitting (part number 041596, sold separately) that lets water drain down to the bilge instead of collecting in the recess.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 041426 pull-up cleat weigh?\u003c\/strong\u003e The Sea-Dog Pull-Up Cleat 041426 weighs 1.75 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the stud diameter on this cleat?\u003c\/strong\u003e Dimension D on the 041426 cleat, corresponding to the stud size, is 7\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this cleat and Sea-Dog part 041424?\u003c\/strong\u003e Part 041426 is the 5-3\/4 inch size in Sea-Dog's pull-up cleat lineup, while 041424 is a smaller 4-1\/2 inch version; both share the same investment cast 316 stainless steel construction and hidden stud mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat sold individually or in bulk?\u003c\/strong\u003e Part number 041426 is packaged as a bulk item with a standard pack quantity of 10 each, and it does not include the backing plate that comes with the display-packaged version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the correct backing plate for the Sea-Dog 041426 cleat?\u003c\/strong\u003e The correct backing plate for the 5-3\/4 inch Sea-Dog Pull-Up Cleat (041426) is part number 041486, sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an original Sea-Dog part?\u003c\/strong\u003e Yes, part number 041426 is the genuine Sea-Dog manufacturer part number for the 5-3\/4 inch stainless steel pull-up cleat.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543713499,"sku":"S-D-041426","price":78.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7464.jpg?v=1784421674"},{"product_id":"sea-dog-041606-1-open-base-cleat-6-inch-investment-cast-316-stainless-steel-universal-deck-mount","title":"Sea-Dog 041606-1 Open Base Cleat, 6 Inch, Investment Cast 316 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog 041606-1 is a 6 inch open base cleat built for easy line tie-off on deck, dock, or dinghy. It is investment cast from 316 stainless steel, a grade chosen for its resistance to saltwater corrosion, so the cleat holds its finish and structural integrity in a marine environment far better than plated steel or lower-grade alloys. The open base design gives quick access for wrapping and releasing dock lines, and the classic profile suits traditional boat and dock hardware layouts.\u003c\/p\u003e\u003cp\u003eThis cleat has a 6 inch overall length and a 2-1\/4 inch base width. It installs with four 1\/4 inch flat head thru-bolts (bolts are not included), so plan to have matching hardware and backing on hand for a secure through-deck installation. At 0.378 pounds, it is a compact, easy-to-handle piece of hardware suited to a wide range of boats and dock setups.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041606-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 1\/4 inch flat head thru-bolt (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Required:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.378 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041034\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Open base, four-hole thru-bolt\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Sea-Dog 041606-1 cleat?\u003c\/strong\u003e It has a 6 inch overall length, matching the 041606-1 designation in the Sea-Dog open base cleat lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 041606-1 cleat made from?\u003c\/strong\u003e Investment cast 316 stainless steel, chosen for corrosion resistance in saltwater and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow wide is the base of this cleat?\u003c\/strong\u003e The base width is 2-1\/4 inches on the Sea-Dog 041606-1 open base cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware do I need to install this cleat?\u003c\/strong\u003e Four 1\/4 inch flat head thru-bolts are required to mount the 041606-1; the bolts are not included and must be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 041606-1 come with mounting bolts?\u003c\/strong\u003e No, mounting bolts are not included with this cleat, only the cleat itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cleat weigh?\u003c\/strong\u003e The Sea-Dog 041606-1 open base cleat weighs 0.378 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat hold up in saltwater?\u003c\/strong\u003e Yes, because it is investment cast from 316 stainless steel, a grade selected specifically for resistance to saltwater corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 041606-1 open base cleat and the Sea-Dog Smart Cleat?\u003c\/strong\u003e The 041606-1 is a standard open base cleat with no knob feature. Sea-Dog also offers the Smart Cleat (041636-1), a 6-1\/4 inch open base cleat cast from the same 316 stainless steel but with a knob end that helps keep lines from slipping off; buyers who want that added line retention should choose that part instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 041606-1 cleat sold individually?\u003c\/strong\u003e Yes, the Sea-Dog 041606-1 open base cleat is sold per each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cleat have an open or closed base?\u003c\/strong\u003e The 041606-1 uses an open base design that installs with four thru-bolts, allowing easy line tie-off around the base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 041606-1 cleat?\u003c\/strong\u003e The UPC for this cleat is 035514041034.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 041606-1 cleat still in production?\u003c\/strong\u003e Yes, this part number is an active, non-discontinued item in the Sea-Dog cleat lineup.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543844571,"sku":"S-D-041606-1","price":23.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3964_f09a6e4b-2fe3-4021-aad9-3fa6cf48202e.jpg?v=1784421712"},{"product_id":"sea-dog-041608-1-open-base-cleat-8-in-investment-cast-316-stainless-steel","title":"Sea-Dog Open Base Cleat, 8 Inch, 316 Stainless Steel, Part 041608-1","description":"\u003cp\u003eThe Sea-Dog Open Base Cleat (part 041608-1) is an 8 inch line tie-off cleat built for corrosion resistance and long-term durability in marine environments. It is constructed of investment cast 316 stainless steel, a grade chosen specifically for its resistance to saltwater corrosion, making it suitable for use on deck, dock, or hull surfaces exposed to constant moisture and salt spray.\u003c\/p\u003e\u003cp\u003eThis cleat uses a classic open base design for easy line tie-off and a traditional look on deck. It installs with four 1\/4 inch flat head thru-bolts (not included), which pass through the open base for a secure, flush mount. The cleat measures 8 inches along its primary dimension, with additional catalog dimensions of 1-1\/2 inches, 2-13\/16 inches, and 1-3\/8 inches, and weighs 0.668 pounds.\u003c\/p\u003e\u003cp\u003eThis 8 inch size is one of several sizes offered in the Sea-Dog Open Base Cleat line, so buyers should confirm the 8 inch length and part number 041608-1 match their intended mounting location before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041608-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-13\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 1\/4 inch Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Four flat head thru-bolts (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.668 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041027\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 041608-1 cleat?\u003c\/strong\u003e The 041608-1 is the 8 inch size in the Sea-Dog Open Base Cleat lineup, with an overall length of 8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e It is made of investment cast 316 stainless steel, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 041608-1 cleat include mounting hardware?\u003c\/strong\u003e No, thru-bolts are not included. The cleat installs with four 1\/4 inch flat head thru-bolts that must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounting bolts does this cleat need?\u003c\/strong\u003e Four flat head thru-bolts are required to install the 041608-1 open base cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the base style of this cleat?\u003c\/strong\u003e The 041608-1 uses an open base design, which allows the four mounting bolts to pass through the open area of the base for a secure, flush installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 8 inch Sea-Dog cleat weigh?\u003c\/strong\u003e The Sea-Dog 041608-1 weighs 0.668 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 316 stainless steel resistant to rust in saltwater?\u003c\/strong\u003e Yes, 316 stainless steel is a marine-grade alloy specifically formulated for corrosion resistance in saltwater, which is why it is used for the 041608-1 open base cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 041608-1 cleat besides its 8 inch length?\u003c\/strong\u003e Beyond the 8 inch overall length, the cleat has catalog dimensions of 1-1\/2 inches, 2-13\/16 inches, and 1-3\/8 inches, and uses a 1\/4 inch flat head fastener size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this cleat used for?\u003c\/strong\u003e The 041608-1 open base cleat is used for tying off dock lines and other lines on a boat deck or dock in a classic open base style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre other sizes of this Sea-Dog cleat available?\u003c\/strong\u003e Yes, the Open Base Cleat design is offered in multiple lengths; the 041608-1 is specifically the 8 inch version, so buyers should confirm this length matches their needs before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 041608-1 a cast or stamped cleat?\u003c\/strong\u003e It is investment cast, not stamped, which is part of how the 041608-1 achieves its corrosion resistant, classic cleat shape.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543910107,"sku":"S-D-041608-1","price":44.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3964_1164f68c-3792-4a72-adf5-74e4921ec956.jpg?v=1784421718"},{"product_id":"sea-dog-041610-1-open-base-cleat-10-in-316-stainless-steel-marine-dock-cleat","title":"Sea-Dog Open Base Cleat, 10 Inch, Investment Cast 316 Stainless Steel, Part 041610-1","description":"\u003cp\u003eThe Sea-Dog Open Base Cleat (part number 041610-1) is a 10 inch line tie-off cleat built for boaters who want dependable corrosion resistance in a classic, unadorned horn shape. It is investment cast from 316 stainless steel, the marine-grade alloy chosen for its resistance to salt water corrosion, so it holds up to repeated exposure at the dock or underway without pitting or staining like lower grades of stainless. The open base design is a traditional cleat profile, offering a straightforward, low-profile mounting footprint that works well anywhere a reliable tie-off point is needed on deck, at the bow, or along a dock.\u003c\/p\u003e\u003cp\u003eThis cleat installs with four 5\/16 inch flat head thru-bolts (fasteners are not included, so plan to source your own hardware sized to your mounting surface thickness). At 10 inches long with a 1-7\/8 inch width, 3-5\/8 inch height, and 1-3\/4 inch base dimension, it is sized for mid-size lines and general-purpose docking and mooring duty. Because it is cast rather than stamped, the cleat resists bending and flexing under load, giving it a longer service life than lighter-weight fittings.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041610-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth (B):\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight (C):\u003c\/strong\u003e 3-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimension (D):\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 5\/16 inch flat head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Four thru-bolt mounting points (fasteners not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.184 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041041\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal deck and dock cleat and is not restricted to a specific boat make, model, or engine; it mounts anywhere a 10 inch open base cleat is appropriate.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 041610-1 cleat?\u003c\/strong\u003e The 041610-1 open base cleat is 10 inches long overall, 1-7\/8 inches wide, 3-5\/8 inches high, with a 1-3\/4 inch base dimension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e It is investment cast from 316 stainless steel, a marine-grade alloy chosen for corrosion resistance in salt water environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 041610-1 cleat come with mounting hardware?\u003c\/strong\u003e No, the Sea-Dog 041610-1 installs with four 5\/16 inch flat head thru-bolts, but the fasteners themselves are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounting bolts does this cleat need?\u003c\/strong\u003e The 041610-1 open base cleat mounts with four thru-bolts, each sized 5\/16 inch flat head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 316 stainless steel better than 304 for boat cleats?\u003c\/strong\u003e 316 stainless steel, which the Sea-Dog 041610-1 is made from, contains molybdenum that gives it stronger resistance to salt water corrosion and pitting than 304 stainless, making it a preferred choice for marine hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this cleat and the Sea-Dog Smart Cleat?\u003c\/strong\u003e The 041610-1 is an open base cleat with a classic straight-horn design, while the Sea-Dog Smart Cleat has a knob end that helps prevent lines from slipping off; both are cast from 316 stainless steel but the Smart Cleat is a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat fit any boat?\u003c\/strong\u003e The Sea-Dog 041610-1 is a universal 10 inch open base cleat, not restricted to a particular boat make or model, and can be mounted anywhere a cleat of this size and bolt pattern is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 041610-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog open base cleat, part 041610-1, weighs 1.184 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat cast or stamped?\u003c\/strong\u003e The 041610-1 is investment cast, not stamped, which gives it more resistance to bending and flexing under load than lighter stamped fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this cleat?\u003c\/strong\u003e The package includes the Sea-Dog 041610-1 open base cleat itself; the four 5\/16 inch flat head thru-bolts needed for mounting are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 041610-1 genuine Sea-Dog hardware?\u003c\/strong\u003e Yes, part number 041610-1 is a genuine Sea-Dog manufactured cleat, not a generic aftermarket copy.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543942875,"sku":"S-D-041610-1","price":61.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3964_effeead3-4c4d-4feb-a06c-84cb7ac90e0b.jpg?v=1784421721"},{"product_id":"sea-dog-041605-1-open-base-cleat-5-inch-316-stainless-steel-boat-dock-cleat","title":"Sea-Dog Open Base Cleat, 5 Inch, 316 Stainless Steel, Model 041605-1","description":"\u003cp\u003eThe Sea-Dog Open Base Cleat (041605-1) is a 5 inch investment cast 316 stainless steel cleat built for secure line tie-off on deck, dock, or hull. Investment casting produces a dense, uniform structure with a smooth, consistent finish, and 316 stainless steel gives the cleat strong resistance to saltwater corrosion, making it suited to long-term marine exposure. The classic open-base horn design lets dock lines, fenders, and mooring lines be tied off quickly and released just as easily, and it mounts to a flat deck or gunwale surface using four flat head thru-bolts (fasteners not included).\u003c\/p\u003e\u003cp\u003eThis cleat is sized at 5 inches overall, with a base footprint and horn height proportioned for that size class in the Sea-Dog open base cleat line, which also includes 4 inch, 6 inch, 8 inch, 10 inch, and 12 inch versions sharing the same investment cast 316 stainless steel construction and open-base, four-bolt mounting pattern. Because it uses standard thru-bolt mounting rather than a proprietary bracket, it is straightforward to install as an upgrade or direct replacement on boats, docks, and other structures that use a comparably sized open base cleat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041605-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (Overall Length):\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #10 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Open Base, Four-Bolt Thru-Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.294 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041089\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 041605-1 cleat?\u003c\/strong\u003e The Sea-Dog 041605-1 is a 5 inch open base cleat, measuring 5 inches in overall length (dimension A), with a base and horn profile of 1-1\/8 inches (B), 2-1\/8 inches (C), and 1 inch (D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made of?\u003c\/strong\u003e This cleat is investment cast from 316 stainless steel, a grade chosen for its resistance to saltwater corrosion in marine hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Sea-Dog 041605-1 mount?\u003c\/strong\u003e It mounts with an open base design using four #10 flat head thru-bolts; the fasteners are not included with the cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cleat weigh?\u003c\/strong\u003e The Sea-Dog 041605-1 open base cleat weighs 0.294 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat suitable for saltwater use?\u003c\/strong\u003e Yes. Because it is investment cast 316 stainless steel, the 041605-1 cleat is built to resist corrosion in saltwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Sea-Dog 5 inch open base cleat, part number 041605-1, has UPC 035514041089.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cleat come with mounting hardware?\u003c\/strong\u003e No, the four #10 flat head thru-bolts needed to mount the 041605-1 cleat are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other sizes does this cleat come in?\u003c\/strong\u003e The Sea-Dog open base cleat design is also offered in 4 inch, 6 inch, 8 inch, 10 inch, and 12 inch sizes, each built from the same investment cast 316 stainless steel with the same open-base, four-bolt mounting style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this open base cleat and the Sea-Dog Smart Cleat?\u003c\/strong\u003e The 041605-1 open base cleat has a plain classic horn shape, while the Sea-Dog Smart Cleat adds a knob end on the horn to help prevent lines from slipping off; both are investment cast 316 stainless steel and mount with an open base four-bolt pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used for both dock lines and fenders?\u003c\/strong\u003e Yes, the open horn design of the 041605-1 cleat is intended for general line tie-off, including dock lines, mooring lines, and fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the finish on this cleat polished?\u003c\/strong\u003e The 041605-1 cleat is produced by investment casting, which yields a smooth, uniform stainless steel surface finish.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988543975643,"sku":"S-D-041605-1","price":26.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3964_a59dffdd-3618-417d-909c-fa4b2f1fb952.jpg?v=1784421736"},{"product_id":"sea-dog-041666-1-smart-cleat-6-1-4-stud-mount-investment-cast-316-stainless-steel","title":"Sea-Dog Smart Cleat 6-1\/4 Inch Stud Mount 316 Stainless Steel Boat Cleat","description":"\u003cp\u003eThe Sea-Dog Smart Cleat (part number 041666-1) is a stud mount cleat built for clean, secure line tie-off on boats, docks, and marine hardware installations. Constructed of investment cast 316 stainless steel, it resists corrosion from saltwater and marine exposure while holding its polished finish over time. The knob-end design keeps lines from slipping off the horns, reducing the risk of lines working loose and minimizing the potential for collision injuries when moving around deck.\u003c\/p\u003e\u003cp\u003eUnlike traditional through-bolt cleats, the Smart Cleat uses hidden stud mount fasteners, so there are no exposed nuts or bolts on the mounting surface to collect water, dirt, or debris. Installation only requires two standard-size bit holes drilled for the studs, with no cutouts or hole saws needed, making it a straightforward upgrade or replacement for an existing cleat base. The studs measure 1\/4 inch by 1-1\/2 inches with 1\/4-20 NC threads, and the cleat ships complete with stainless steel washers and nuts for a full, ready-to-install package.\u003c\/p\u003e\u003cp\u003eAt 6-1\/4 inches long, this cleat suits a wide range of cleating applications where a compact, classic-style tie-off point is needed. Its investment cast construction gives it a solid, one-piece feel that stands up to repeated line loading over years of use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 041666-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Stud Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 6-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-9\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 1\/4 inch x 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Thread:\u003c\/strong\u003e 1\/4-20 NC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.62 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514041768\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Stainless steel washers and nuts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 041666-1 Smart Cleat made of?\u003c\/strong\u003e It is made of investment cast 316 stainless steel, which resists corrosion in saltwater and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog Smart Cleat 041666-1 mounted?\u003c\/strong\u003e This cleat uses a stud mount design with hidden fasteners. Two standard-size bit holes are drilled for the 1\/4 inch by 1-1\/2 inch studs, and no cutouts or hole saws are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 041666-1 cleat come with mounting hardware?\u003c\/strong\u003e Yes, the Sea-Dog Smart Cleat 041666-1 includes stainless steel washers and nuts along with the studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog Smart Cleat 041666-1?\u003c\/strong\u003e The overall length is 6-1\/4 inches, with a base width of 2 inches and a height dimension of 1-9\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size are the mounting studs on this cleat?\u003c\/strong\u003e The studs are 1\/4 inch by 1-1\/2 inches with 1\/4-20 NC threads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 041666-1 cleat weigh?\u003c\/strong\u003e It weighs 0.62 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are there no visible bolts on top of this cleat?\u003c\/strong\u003e The Sea-Dog Smart Cleat 041666-1 uses a stud mount system where the fasteners are hidden beneath the mounting surface, so there are no exposed nuts or bolts on top to collect water or debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Stud Mount Smart Cleat (041666-1) and a standard stud mount cleat?\u003c\/strong\u003e The 041666-1 Smart Cleat has a knob end that helps prevent lines from slipping off and reduces the chance of collision injuries, a feature not described on Sea-Dog's standard stud mount cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 041666-1 cleat genuine Sea-Dog hardware?\u003c\/strong\u003e Yes, it is a genuine Sea-Dog product identified by part number 041666-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat rust or corrode over time?\u003c\/strong\u003e The investment cast 316 stainless steel construction of the 041666-1 cleat is corrosion resistant, making it suitable for ongoing marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the Sea-Dog Smart Cleat 041666-1?\u003c\/strong\u003e Each unit includes the cast 316 stainless steel cleat body along with its mounting studs, stainless steel washers, and nuts.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544008411,"sku":"S-D-041666-1","price":44.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7315.jpg?v=1784421748"},{"product_id":"sea-dog-043040-1-open-base-cleat-4-inch-black-injection-molded-nylon-dock-cleat","title":"Sea-Dog Open Base Cleat, 4 Inch Black Nylon Boat Cleat with #8 Fastener Holes","description":"\u003cp\u003eThe Sea-Dog Open Base Cleat (043040-1) is a 4 inch black nylon dock cleat designed for securing dock lines, mooring lines, and fenders on boats and docks. It is built from injection molded nylon that resists corrosion and UV degradation, making it suitable for long-term exposure to sun, saltwater, and freshwater environments. The defining feature of this cleat is its open base with a molded-in recess that traps sealant in place during installation, creating a more watertight seal around the mounting fasteners and helping prevent water intrusion into the deck or hull core.\u003c\/p\u003e\u003cp\u003eThis cleat measures 4 inches in overall length with a height of 7\/8 inch, giving it a compact footprint suitable for smaller boats, docks, kayaks, canoes, and utility applications where a full-size bow or stern cleat is not needed. It installs using two flat head fasteners sized for a #8 screw (fasteners are not included and must be purchased separately). The cleat is finished in black to blend with dark trim, rails, and non-skid surfaces. It ships as a single cleat, and Sea-Dog also offers this same open base cleat design in additional sizes for larger line diameters and heavier-duty applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 043040-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #8 Flat Head (fasteners not included, 2 required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.088 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514043090\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 043040-1 open base cleat?\u003c\/strong\u003e The Sea-Dog 043040-1 open base cleat measures 4 inches in overall length and 7\/8 inch in height, making it a compact cleat suited to smaller boats and dock applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e This cleat is made from injection molded nylon that resists corrosion and UV damage, which is why Sea-Dog uses it for the 043040-1 open base cleat rather than metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'open base' mean on this cleat?\u003c\/strong\u003e Open base refers to a molded-in recess in the base of the 043040-1 cleat that traps sealant in place during mounting, giving a more watertight seal around the fastener holes than a flat-base cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners does the 043040-1 cleat require?\u003c\/strong\u003e Two #8 flat head fasteners are needed to install the Sea-Dog 043040-1 cleat; fasteners are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat sold as a single piece or a pair?\u003c\/strong\u003e The 043040-1 is sold as a single black cleat, though it is packed in standard quantities of 10 pieces at the distributor level.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sea-Dog make this cleat in white?\u003c\/strong\u003e Yes, Sea-Dog produces this same 4 inch open base cleat design in white as a separate part number in addition to the black 043040-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cleat weigh?\u003c\/strong\u003e The Sea-Dog 043040-1 open base cleat weighs 0.088 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this cleat used for?\u003c\/strong\u003e The 043040-1 is used to secure dock lines, mooring lines, and fenders on boats, docks, kayaks, and other small watercraft or dock structures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat UV and saltwater resistant?\u003c\/strong\u003e Yes, the nylon construction of the 043040-1 open base cleat is corrosion and UV resistant, making it suitable for continuous exposure to sun and marine water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sea-Dog offer larger versions of this same cleat?\u003c\/strong\u003e Yes, the open base cleat design used for the 4 inch 043040-1 is also available from Sea-Dog in other lengths for applications needing a larger cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 043040-1 cleat?\u003c\/strong\u003e The UPC for the Sea-Dog 043040-1 black 4 inch open base cleat is 035514043090.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544041179,"sku":"S-D-043040-1","price":4.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7471.jpg?v=1784421759"},{"product_id":"sea-dog-043340-1-heavy-duty-cleat-4-1-4-black-nylon-tie-down-cleat-pair","title":"Sea-Dog Heavy Duty Nylon Cleat, 4-1\/4 Inch, Black, Pack of 2","description":"\u003cp\u003eThe Sea-Dog Heavy Duty Cleat is an injection molded nylon tie-down cleat built for securing dock lines, fender lines, flag halyards, canvas tie-downs, and other related accessories aboard a boat. Constructed of UV resistant and corrosion resistant injection molded nylon, this cleat is designed to hold up to sun, salt spray, and repeated use without cracking or fading the way many lower-grade plastics do. The cleat measures 4-1\/4 inches and features flared posts that add strength and stability when lines are cinched down under load, making it a dependable choice for everyday cleating tasks around the deck, rail, or dock.\u003c\/p\u003e\u003cp\u003eThis cleat is sold as a pack of two and finished in black. It is designed for easy installation on flat mounting surfaces; fasteners are not included, so screws or bolts sized for the mounting holes should be purchased separately based on the mounting surface. Because it is molded entirely from nylon rather than metal, it will not corrode, rust, or leave stains on gelcoat or fiberglass, making it a popular upgrade or replacement for boats, docks, and canvas covers where a lightweight, low-maintenance cleat is preferred over stainless steel or chrome-plated bronze hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 043340-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 4-1\/4 Inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514043052\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 043340-1 cleat?\u003c\/strong\u003e The Sea-Dog 043340-1 heavy duty cleat measures 4-1\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made of?\u003c\/strong\u003e Sea-Dog part 043340-1 is made of injection molded nylon that resists UV exposure and corrosion, so it will not rust or stain gelcoat the way metal hardware can.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cleats come in a package?\u003c\/strong\u003e The 043340-1 cleat is sold as a pack of two.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting screws included with this cleat?\u003c\/strong\u003e No, fasteners are not included with the Sea-Dog 043340-1 cleat, so screws or bolts should be sourced separately to match the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog 043340-1 cleat?\u003c\/strong\u003e This cleat is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this cleat typically used for?\u003c\/strong\u003e It is used for tying down fenders, flag halyards, canvas covers, and similar dock or boat accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does one package weigh?\u003c\/strong\u003e The Sea-Dog 043340-1 cleat weighs 0.15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this nylon cleat corrode like a metal cleat?\u003c\/strong\u003e No. Because the 043340-1 cleat is injection molded nylon rather than metal, it will not corrode or rust in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat easy to install?\u003c\/strong\u003e Yes, the Sea-Dog 043340-1 cleat is designed for durable, easy installation on a flat mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a nylon cleat over a stainless steel one?\u003c\/strong\u003e A nylon cleat like the Sea-Dog 043340-1 is lighter than stainless steel, will not scratch gelcoat or fiberglass, and resists UV and corrosion without the higher cost of stainless hardware.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544073947,"sku":"S-D-043340-1","price":7.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4646.jpg?v=1784421772"},{"product_id":"sea-dog-043050-1-open-base-nylon-cleat-5-inch-black-pair-corrosion-uv-resistant-dock-cleat","title":"Sea-Dog Open Base Cleat 5 Inch, Black Nylon, Sold as a Pair","description":"\u003cp\u003eThe Sea-Dog 043050-1 Open Base Cleat is a 5 inch black nylon cleat designed for securing dock lines and mooring lines on boats and docks. It is built with a molded-in recess in the base that traps sealant in place during installation, creating a more watertight seal around the mounting fasteners and helping to prevent water intrusion into the deck or dock surface below. The cleat is constructed of durable injection molded nylon that resists corrosion and UV degradation, making it a long-lasting choice for constant exposure to sun, salt water, and moisture.\u003c\/p\u003e\u003cp\u003eThis open base design mounts with two flat head fasteners (not included) sized for a #10 screw. The cleat measures 5 inches in overall length with a height of 1-1\/16 inches. It is sold as a matched pair, with two cleats included per package. This 5 inch size is part of the Sea-Dog open base cleat lineup, which also includes smaller 3 inch and 4 inch sizes, and this same 5 inch cleat is also offered in white under a separate part number for buyers who want to match different deck or hull colors.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 043050-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 flat head (fasteners not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.152 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Sold as a pair (2 cleats per package)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514043106\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 043050-1 open base cleat?\u003c\/strong\u003e The Sea-Dog 043050-1 open base cleat measures 5 inches in overall length and 1-1\/16 inches in height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this cleat come in?\u003c\/strong\u003e The 043050-1 cleat is black. Sea-Dog also offers this same 5 inch open base cleat in white under a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cleat made of?\u003c\/strong\u003e It is made of injection molded nylon that resists corrosion and UV degradation, suited to ongoing marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with this cleat?\u003c\/strong\u003e No. The Sea-Dog 043050-1 cleat is designed for #10 flat head fasteners, which are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cleats are included in one package?\u003c\/strong\u003e This listing is sold as a matched pair, with two 043050-1 cleats included per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the recess in the base of the cleat do?\u003c\/strong\u003e The molded-in recess in the base of the 043050-1 cleat traps sealant in place during installation, helping create a more watertight seal at the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog open base cleat weigh?\u003c\/strong\u003e The Sea-Dog 043050-1 open base cleat weighs 0.152 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener size does the 043050-1 cleat use?\u003c\/strong\u003e It is designed to mount with #10 flat head fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat an open base or closed base design?\u003c\/strong\u003e The 043050-1 is an open base cleat, meaning the underside of the base is open with a recessed area to hold sealant rather than a fully enclosed base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 5 inch cleat compare to Sea-Dog's smaller open base cleats?\u003c\/strong\u003e The 5 inch 043050-1 is larger than Sea-Dog's 3 inch (043030-1) and 4 inch (043040-1) open base cleats and uses a larger #10 flat head fastener, compared to the #6 fastener on the 3 inch cleat and the #8 fastener on the 4 inch cleat.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544106715,"sku":"S-D-043050-1","price":5.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7471_01387ead-a0a9-438a-85ca-b705ab411390.jpg?v=1784421776"},{"product_id":"sea-dog-043065-1-open-base-nylon-cleat-6-1-2-in-black-sealant-trapping-molded-recess-base","title":"Sea-Dog Open Base Nylon Cleat, 6-1\/2 Inch, Black, Part 043065-1","description":"\u003cp\u003eThe Sea-Dog 043065-1 is a 6-1\/2 inch open base nylon cleat built for securing dock and mooring lines on boats and docks. It is molded from durable, corrosion and UV resistant injection molded nylon, making it a long-lasting alternative to metal cleats in the marine environment. The base of the cleat has a molded-in recess that traps sealant in place during installation, creating a more watertight seal at the mounting surface and helping prevent water intrusion into the deck or dock core below.\u003c\/p\u003e\u003cp\u003eThis cleat installs with two flat head fasteners sized for a #12 screw (fasteners are not included), and is finished in black to blend with dark deck hardware and trim. Its open base design leaves the underside of the horns clear, which some installers use with an optional rub plate for added line protection at the base. The 043065-1 is part of the Sea-Dog Open Base Cleat line, which is also offered in additional sizes and in white for the 5 inch size.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 043065-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection molded nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 6-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional Dimensions (per manufacturer spec sheet):\u003c\/strong\u003e 1-3\/8 inches x 1-11\/16 inches x 2-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #12 flat head (fasteners not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.166 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514043113\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal mount for boat decks and docks; not engine or model specific.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 043065-1 cleat?\u003c\/strong\u003e The 043065-1 has an overall length of 6-1\/2 inches, making it the mid-large size in the Sea-Dog Open Base Cleat lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e It is molded from injection molded nylon that resists corrosion and UV degradation, so it will not rust like metal deck hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 043065-1 cleat come in colors other than black?\u003c\/strong\u003e This part number is black; the Open Base Cleat series is also offered in white at the 5 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes an open base cleat different from a standard cleat?\u003c\/strong\u003e The Sea-Dog Open Base Cleat has a molded-in recess in its base that traps sealant in place during installation, giving a more watertight seal than a flat-base cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners does the 043065-1 cleat need?\u003c\/strong\u003e It mounts with two flat head fasteners sized for a #12 screw; fasteners are not included with the cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 043065-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog 043065-1 open base cleat weighs 0.166 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cleats come in a package?\u003c\/strong\u003e The 043065-1 is packed 10 each per case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a backing plate needed for this cleat?\u003c\/strong\u003e A backing plate is shown as an option for the Sea-Dog Open Base Cleat installation to reinforce the mounting surface, and a rub plate is also available as an optional accessory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 043065-1 cleat be used on a dock as well as a boat?\u003c\/strong\u003e Yes, the Sea-Dog open base nylon cleat is suited for both boat deck and dock mounting since it is a universal mounting cleat rather than a model-specific part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat hold up in saltwater conditions?\u003c\/strong\u003e Its injection molded nylon construction is corrosion and UV resistant, which suits the 043065-1 for saltwater and sun exposure on deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 043065-1 cleat?\u003c\/strong\u003e The UPC for the Sea-Dog Open Base Nylon Cleat, part 043065-1, is 035514043113.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544139483,"sku":"S-D-043065-1","price":7.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7471_a035ddd1-1dc8-42ef-8ec5-773549521720.jpg?v=1784421780"},{"product_id":"sea-dog-043540-1-zig-zag-cleat-injection-molded-nylon-fits-line-up-to-3-8-in-kayak-canoe-small-boat-cleat","title":"Sea-Dog 043540-1 Zig Zag Cleat - 3-1\/2 Inch Nylon Line Cleat for Kayaks and Canoes","description":"\u003cp\u003eThe Sea-Dog 043540-1 Zig Zag Cleat is a primary tie-off point built for kayaks, canoes, and other small vessels. Instead of tying knots, the operator simply weaves the line back and forth around the cleat's arms in a zig-zag pattern, a cross-functional lace-back design that makes single-handed tie-offs fast and secure. It is well suited for adjusting and securing anchor lines, mooring lines, fender lines, and utility or trailer cover lines, and accepts line up to 3\/8 inch in diameter.\u003c\/p\u003e\u003cp\u003eThe cleat is constructed of injection molded nylon that is corrosion resistant and UV stabilized, so it holds up to sun and saltwater exposure without rusting or becoming brittle. It measures 3-1\/2 inches in overall length (A), 15\/16 inch (B), 1-15\/16 inches (C), and 1-3\/4 inches at the base (D). Installation is straightforward: the cleat mounts with two 1\/4 inch flat head fasteners, which are not included, through its molded mounting holes. Its compact, lightweight design makes it a practical upgrade over traditional horn cleats on small boats where deck space and weight are at a premium.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 043540-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 3-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 15\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width (D):\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 1\/4 inch FH (flat head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Line Size:\u003c\/strong\u003e Up to 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.218 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514043304\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 043540-1 Zig Zag Cleat used for?\u003c\/strong\u003e It serves as a primary tie-off cleat on kayaks, canoes, and other small vessels, used for securing anchor lines, mooring lines, fender lines, and utility or trailer cover lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you tie a line to the Zig Zag Cleat?\u003c\/strong\u003e No knots are needed. The line is simply woven back and forth around the arms of the 043540-1 cleat in a zig-zag pattern, and its lace-back design allows for quick single-handed tie-offs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size line does the 043540-1 cleat accept?\u003c\/strong\u003e The Sea-Dog Zig Zag Cleat fits line up to 3\/8 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Zig Zag Cleat made of?\u003c\/strong\u003e It is made of injection molded nylon that is corrosion resistant and UV stabilized, so the 043540-1 cleat resists rust and sun degradation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 043540-1 cleat?\u003c\/strong\u003e The cleat measures 3-1\/2 inches (A) in overall length, 15\/16 inch (B), 1-15\/16 inches (C), and 1-3\/4 inches (D) at the base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Zig Zag Cleat weigh?\u003c\/strong\u003e The Sea-Dog 043540-1 Zig Zag Cleat weighs 0.218 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with the 043540-1 cleat?\u003c\/strong\u003e No, fasteners are not included. The cleat is designed to install with two 1\/4 inch flat head (FH) fasteners that the installer supplies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog Zig Zag Cleat?\u003c\/strong\u003e The 043540-1 Zig Zag Cleat is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 043540-1 different from Sea-Dog's other Zig Zag Cleat sizes?\u003c\/strong\u003e Yes, 043540-1 is the 3-1\/2 inch version identified by dimensions A through D of 3-1\/2 inches, 15\/16 inch, 1-15\/16 inches, and 1-3\/4 inches; ordering by this exact part number ensures you get this size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Zig Zag Cleat be used in place of a traditional horn cleat?\u003c\/strong\u003e Yes, the Sea-Dog 043540-1 works as a compact alternative to a horn-style cleat, using its zig-zag arm design instead of a knotted hitch to hold the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 043540-1 Zig Zag Cleat?\u003c\/strong\u003e The UPC for this cleat is 035514043304.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544270555,"sku":"S-D-043540-1","price":5.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7052.jpg?v=1784421813"},{"product_id":"sea-dog-044104-1-four-hole-hollow-base-cleat-4-1-2-in-chrome-plated-zinc-boat-dock-cleat","title":"Sea-Dog 4-1\/2 Inch Four-Hole Hollow Cleat, Chrome Plated Zinc, 044104-1","description":"\u003cp\u003eThe Sea-Dog 044104-1 is a 4-1\/2 inch four-hole hollow cleat built from die cast zinc with a chrome plated finish. It is designed as an economical mooring and docking cleat for freshwater applications, giving boat owners a simple, low-cost way to secure dock lines, fenders, and mooring ropes.\u003c\/p\u003e\u003cp\u003eThe cleat features an open (hollow) base rather than a solid casting, which reduces material and keeps the part lightweight while still providing a durable line-holding surface for everyday freshwater use. It surface mounts using four #8 flat head fasteners, which are not included and must be purchased separately. The overall length is 4-1\/2 inches with a 1-3\/4 inch base, making it a compact size suited to smaller boats, dinghies, docks, and similar applications where a full-size cleat is not needed.\u003c\/p\u003e\u003cp\u003eSea-Dog also offers a larger 6 inch version of this same four-hole hollow cleat design (044106-1) as a separate part for boats that need a bigger cleat and heavier #10 fasteners, so buyers should confirm which length fits their vessel before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 044104-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 4-Hole Cleat, Hollow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die cast zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Style:\u003c\/strong\u003e Open\/hollow base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 4-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Length:\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface mount, 4-hole pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #8 flat head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514044011\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal surface-mount cleat; not vessel or engine specific.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 044104-1 cleat?\u003c\/strong\u003e The 044104-1 has an overall length of 4-1\/2 inches with a 1-3\/4 inch base, making it a compact cleat suited to smaller boats and docks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 044104-1 cleat made of?\u003c\/strong\u003e It is made of die cast zinc with a chrome plated finish, giving it a durable, corrosion-resistant surface for freshwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat a solid or open base design?\u003c\/strong\u003e The 044104-1 uses an open, hollow base rather than a solid casting, which keeps the part lightweight while still providing a secure line-holding surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog 044104-1 cleat mounted?\u003c\/strong\u003e This cleat surface mounts using four #8 flat head fasteners; the fasteners are not included and need to be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 044104-1 fit a specific boat make or model?\u003c\/strong\u003e No, the 044104-1 is a universal surface-mount cleat and is not tied to a specific boat make, model, or engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 044104-1 and the Sea-Dog 6 inch cleat?\u003c\/strong\u003e The 044104-1 is the 4-1\/2 inch version of Sea-Dog's four-hole hollow cleat; Sea-Dog also makes a larger 6 inch version, part number 044106-1, sold separately for boats needing a bigger cleat and #10 fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 044104-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog 044104-1 cleat weighs 0.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 044104-1 cleat recommended for saltwater use?\u003c\/strong\u003e The 044104-1 is described as an economical choice intended for freshwater applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with the 044104-1 cleat?\u003c\/strong\u003e No, mounting fasteners are not included with the 044104-1; it requires four #8 flat head fasteners supplied separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 044104-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, 044104-1 is the manufacturer part number for this genuine Sea-Dog four-hole hollow cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounting holes does the 044104-1 cleat have?\u003c\/strong\u003e The 044104-1 is a four-hole cleat, mounting to the surface with four fastener holes.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544303323,"sku":"S-D-044104-1","price":8.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7473.jpg?v=1784421820"},{"product_id":"sea-dog-044106-1-four-hole-hollow-base-cleat-6-chrome-plated-zinc-boat-dock-cleat","title":"Sea-Dog 4-Hole Hollow Base Cleat, 6 Inch, Die Cast Chrome Plated Zinc","description":"\u003cp\u003eThe Sea-Dog 044106-1 is a 6 inch open\/hollow base cleat built for securing dock lines on freshwater boats, pontoons, and small craft. It is constructed of die cast zinc with a chrome plated finish, giving it a bright, corrosion-resistant surface that holds up to regular exposure at the dock. The open base design is an economical choice for freshwater applications where a fully enclosed cleat base is not required.\u003c\/p\u003e\u003cp\u003eThis cleat surface mounts using four fastener holes and accepts #10 flat head fasteners (fasteners not included), making it straightforward to install on a deck, dock, or gunwale. The 6 inch overall length places it in the mid-size range of Sea-Dog's hollow base cleat lineup, with a 2-3\/16 inch base width to match. Sea-Dog is a long-running, family owned marine hardware brand, and the 044106-1 reflects that same die cast build quality found across its cleat and chock line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 044106-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 4-Hole Hollow (Open) Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die cast zinc, chrome plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width:\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional Dimension:\u003c\/strong\u003e 1-9\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 flat head (fasteners not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface mount, 4-hole base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.47 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eIntended for freshwater applications; no specific boat make, model, or engine fitment is specified for this cleat.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 044106-1 cleat?\u003c\/strong\u003e The Sea-Dog 044106-1 measures 6 inches overall in length, with a base width of 2-3\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 044106-1 cleat made of?\u003c\/strong\u003e It is made of die cast zinc with a chrome plated finish, which resists corrosion in freshwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat rated for saltwater use?\u003c\/strong\u003e The Sea-Dog 044106-1 is described as an economical choice for freshwater applications; it is not marketed as a saltwater-rated cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners does the 044106-1 cleat use?\u003c\/strong\u003e This cleat mounts with four #10 flat head fasteners, which are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounting holes does this cleat have?\u003c\/strong\u003e The 044106-1 is a 4-hole cleat, meaning it surface mounts using four fastener holes through its open base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'hollow base' mean on this cleat?\u003c\/strong\u003e Hollow base (also called open base) means the underside of the cleat is not solid, which is a common, more economical construction used on the Sea-Dog 044106-1 for freshwater applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 044106-1 weigh?\u003c\/strong\u003e The Sea-Dog 044106-1 cleat weighs 0.47 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 044106-1 cleat come with mounting hardware?\u003c\/strong\u003e No, the four #10 flat head fasteners needed for installation are not included with the Sea-Dog 044106-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 044106-1 and the smaller 044104-1 cleat?\u003c\/strong\u003e The 044106-1 is the 6 inch version of Sea-Dog's hollow base cleat line, while the 044104-1 is the smaller 4-1\/2 inch version; both share the same die cast chrome plated zinc construction and #8 or #10 flat head fastener mounting, but differ in overall length and base dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 044106-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, the 044106-1 is a genuine Sea-Dog manufactured cleat, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the finish on this cleat?\u003c\/strong\u003e The Sea-Dog 044106-1 has a chrome plated finish over its die cast zinc body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used on a dock as well as a boat?\u003c\/strong\u003e Yes, the 044106-1 surface mounts with four fasteners and is suitable for dock or boat deck installation in freshwater settings.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544368859,"sku":"S-D-044106-1","price":10.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7473_22000552-6491-4f25-b88d-d07c67764279.jpg?v=1784421822"},{"product_id":"sea-dog-046104-1-closed-base-flat-head-cleat-4-die-cast-aluminum-for-aluminum-docks-boats","title":"Sea-Dog Closed Base Cleat, 4 Inch Flat Head Die Cast Aluminum Dock Cleat","description":"\u003cp\u003eThe Sea-Dog Closed Base Cleat (046104-1) is a 4 inch flat head dock cleat built from die cast aluminum for durable, corrosion-resistant service on boats and docks. Its closed base design features a large footprint that spreads load evenly across the mounting surface, making it well suited for securing dock lines, fenders, and mooring lines under repeated strain. Sea-Dog designed this cleat specifically for use on aluminum docks, vessels, and other aluminum surfaces, giving it a matched material profile that reduces the risk of galvanic corrosion common when dissimilar metals are paired together in a marine environment.\u003c\/p\u003e\u003cp\u003eThe cleat measures 4 inches in overall length (A), with a base width of 1 inch (B), a base height of 13\/16 inch (C), and an overall height of 1-5\/8 inches (D). It installs with two #10 flat head fasteners, which are not included, allowing the fastener heads to sit flush with the cleat surface for a clean, low-profile finish. At 0.108 pounds, it is a lightweight, compact hardware piece intended for smaller lines and general-purpose docking and tie-down use rather than heavy commercial mooring loads.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 046104-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Closed Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength (A):\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width (B):\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Height (C):\u003c\/strong\u003e 13\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height (D):\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.108 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514046121\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Surface:\u003c\/strong\u003e Aluminum docks and vessels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for use on aluminum docks, vessels, or other aluminum surfaces.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 046104-1 closed base cleat?\u003c\/strong\u003e The Sea-Dog 046104-1 measures 4 inches in overall length, with a base width of 1 inch, a base height of 13\/16 inch, and an overall height of 1-5\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made from?\u003c\/strong\u003e It is constructed of die cast aluminum, matching the material of the aluminum docks and vessels it is designed to be installed on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 046104-1 cleat come with mounting hardware?\u003c\/strong\u003e No, fasteners are not included. The cleat installs with two #10 flat head fasteners that must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is this cleat designed for?\u003c\/strong\u003e Sea-Dog designed the 046104-1 closed base cleat for use on aluminum docks, vessels, or other aluminum surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cleat weigh?\u003c\/strong\u003e The Sea-Dog 046104-1 closed base cleat weighs 0.108 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'closed base' mean on this cleat?\u003c\/strong\u003e A closed base cleat has a solid, enclosed base rather than an open cutout, which gives it a large footprint that distributes line loads evenly across the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this cleat use flat head fasteners?\u003c\/strong\u003e The flat head design of the 046104-1 lets fastener heads sit flush with the cleat surface for a clean, low-profile finish rather than protruding above it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 046104-1 cleat corrosion resistant?\u003c\/strong\u003e Yes, it is die cast aluminum, which resists corrosion and is specifically suited to pairing with aluminum dock and vessel surfaces to avoid galvanic corrosion issues.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 4 inch and 5 inch versions of this cleat?\u003c\/strong\u003e The 4 inch Sea-Dog closed base cleat (046104-1) has smaller overall dimensions and uses a #10 fastener, while the larger 5 inch and 6 inch versions in the same closed base flat head line use 1\/4 inch fasteners and have larger base dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used for mooring larger boats?\u003c\/strong\u003e The 046104-1 is a compact 4 inch cleat best suited to lighter-duty dock line, fender, and tie-down use rather than heavy mooring loads.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544401627,"sku":"S-D-046104-1","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7477.jpg?v=1784421828"},{"product_id":"sea-dog-046105-1-closed-base-cleat-5-in-flat-head-die-cast-aluminum-dock-cleat","title":"Sea-Dog Open Base Cleat, Flat Head, 5 Inch Die Cast Aluminum, 046105-1","description":"\u003cp\u003eThe Sea-Dog Open Base Cleat, part number 046105-1, is a 5 inch flat head dock and deck cleat built from die cast aluminum. It features a large base designed to distribute mooring and docking loads evenly, reducing stress on the mounting surface. The cleat is designed for use on aluminum docks, vessels, or other aluminum surfaces, making it a practical choice for boaters and dock builders who want a mounting-surface-matched hardware set. Installation is straightforward: the cleat mounts with two flat head (FH) fasteners sized for a 1\/4 inch flat head fastener; fasteners are not included and must be sourced separately. Its die cast aluminum construction provides a rigid, corrosion-resistant cleat body suited to marine environments. At 5 inches overall, the 046105-1 sits in the middle of the Sea-Dog open base flat head cleat lineup, offering a size between the smaller 4 inch (046104-1) and larger 6 inch (046106-1) versions for boaters who need to match cleat size to line diameter and mounting space. Each unit weighs 0.152 pounds. This cleat is sold and packed for retail in standard packs of 10 each at the manufacturer level, with each individual cleat available as its own purchasable unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 046105-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Open Base Cleat, Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 1\/4 inch Flat Head (FH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Included:\u003c\/strong\u003e No, two FH fasteners required (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.152 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514046138\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Cleats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 046105-1 cleat made of?\u003c\/strong\u003e The 046105-1 open base cleat is constructed of die cast aluminum for a rigid, corrosion-resistant cleat body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this cleat?\u003c\/strong\u003e The 046105-1 measures 5 inches overall, with a base footprint of 1-1\/16 inches by 1-1\/16 inches and a height of 1-15\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo fasteners come with the 046105-1 cleat?\u003c\/strong\u003e No. The cleat installs with two flat head (FH) fasteners sized to 1\/4 inch, but the fasteners are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is this cleat designed for?\u003c\/strong\u003e The 046105-1 is designed for use on aluminum docks, vessels, or other aluminum surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 046105-1 cleat weigh?\u003c\/strong\u003e Each Sea-Dog 046105-1 open base cleat weighs 0.152 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 046104-1, 046105-1, and 046106-1 cleats?\u003c\/strong\u003e These are the same open base, flat head, die cast aluminum cleat design in three sizes: the 046104-1 is 4 inches, the 046105-1 is 5 inches, and the 046106-1 is 6 inches overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this cleat have a large base?\u003c\/strong\u003e The 046105-1 has a large base designed to distribute mooring and docking loads evenly across the mounting surface, reducing stress at the attachment points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 046105-1 a closed base or open base cleat?\u003c\/strong\u003e The 046105-1 is an open base flat head cleat in the Sea-Dog cleat lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener type does the 046105-1 use?\u003c\/strong\u003e It uses a 1\/4 inch flat head (FH) fastener, with two fasteners needed per cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog 046105-1 cleat sold?\u003c\/strong\u003e The 046105-1 is manufactured and cataloged in standard packs of 10 each, with individual units available for purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 046105-1 cleat corrode in a marine environment?\u003c\/strong\u003e The die cast aluminum construction of the 046105-1 is built to hold up in marine environments, particularly when mounted on aluminum docks or vessels.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544467163,"sku":"S-D-046105-1","price":5.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7477_a3509656-9c00-496c-bfcd-8b37fe01228c.jpg?v=1784421849"},{"product_id":"sea-dog-046106-1-flat-head-closed-base-cleat-6-in-die-cast-aluminum-for-aluminum-docks-and-boats","title":"Sea-Dog 6 Inch Flat Head Closed Base Cleat, Die Cast Aluminum, 046106-1","description":"\u003cp\u003eThis Sea-Dog 046106-1 cleat is a 6 inch flat head closed base cleat built from die cast aluminum. It is designed for use on aluminum docks, vessels, or other aluminum surfaces, and features a large base that distributes mooring and load stress evenly across the mounting surface rather than concentrating it at the fasteners. The closed base design gives the cleat a solid, finished look while the flat head profile keeps the mounting screws countersunk and flush with the base for a clean installation.\u003c\/p\u003e\u003cp\u003eThe cleat installs with two flat head fasteners (not included), so buyers should have appropriate hardware on hand sized to match the base before installation. It is sold individually and is part of Sea-Dog's line of die cast aluminum flat head closed base cleats, which is also offered in 4 inch and 5 inch sizes for smaller or larger mounting applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 046106-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Flat Head Closed Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimension B:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimension C:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimension D:\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e 1\/4 inch flat head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Two flat head fasteners required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.226 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514046015\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 046106-1 cleat?\u003c\/strong\u003e The Sea-Dog 046106-1 is a 6 inch flat head closed base cleat, measuring 6 inches overall with a base measuring 1-3\/8 inches by 1-3\/8 inches and an overall height of 2-3\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this cleat made of?\u003c\/strong\u003e This cleat is constructed of die cast aluminum, making the Sea-Dog 046106-1 suitable for use on aluminum docks, vessels, or other aluminum surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 046106-1 cleat come with mounting hardware?\u003c\/strong\u003e No, fasteners are not included. The Sea-Dog 046106-1 installs with two 1\/4 inch flat head fasteners that must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an open base or closed base cleat?\u003c\/strong\u003e The Sea-Dog 046106-1 is a closed base cleat, giving it a solid base profile rather than an open cutout design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'flat head' mean for this cleat?\u003c\/strong\u003e Flat head refers to the countersunk fastener style used to mount the cleat, allowing the mounting screws on the Sea-Dog 046106-1 to sit flush with the base surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 046106-1 cleat weigh?\u003c\/strong\u003e The Sea-Dog 046106-1 weighs 0.226 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 046106-1 sold as a single cleat or a pair?\u003c\/strong\u003e It is sold individually as one cleat, part number 046106-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is this cleat designed for?\u003c\/strong\u003e The 046106-1 is designed for use on aluminum docks, vessels, or other aluminum surfaces, where its large closed base distributes mooring loads evenly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre smaller or larger sizes of this cleat available?\u003c\/strong\u003e Yes, Sea-Dog also offers this flat head closed base cleat design in 4 inch and 5 inch sizes in addition to the 6 inch 046106-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 046106-1 cleat?\u003c\/strong\u003e The UPC for the Sea-Dog 046106-1 6 inch cleat is 035514046015.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the cleat have a large base?\u003c\/strong\u003e The large base on the Sea-Dog 046106-1 is designed to distribute mooring and load stress evenly across the mounting surface, reducing strain on individual fasteners.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544499931,"sku":"S-D-046106-1","price":7.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7477_3aa329ed-44c4-47f6-8f07-61cddc056d1c.jpg?v=1784421858"},{"product_id":"sea-dog-046108-1-flat-head-open-base-cleat-8-inch-die-cast-aluminum-dock-cleat","title":"Sea-Dog 046108-1 Flat Head Open Base Cleat, 8 Inch, Die Cast Aluminum","description":"\u003cp\u003eThe Sea-Dog 046108-1 is an 8 inch Flat Head Open Base Cleat built for securing dock lines on aluminum docks, vessels, and other aluminum surfaces. It is constructed of die cast aluminum for corrosion resistance and long-term durability in a marine environment. The open base design features a large footprint that spreads mooring and docking loads evenly across the mounting surface, reducing stress on the fasteners and the surface itself rather than concentrating it at a single point.\u003c\/p\u003e\u003cp\u003eThis cleat mounts with two flat head (FH) fasteners, which are not included, allowing the fastener heads to sit flush for a clean, low-profile installation. The base measures 1-1\/2 inches wide, and the cleat has an 8 inch overall length, making it suited for smaller to mid-size cleat applications where a compact, flush-mount hardware piece is needed. Each unit is sold individually.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 046108-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flat Head Open Base Cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions (A x B x C x D):\u003c\/strong\u003e 8 inches x 1-7\/8 inches x 1-1\/2 inches x 2-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e 1\/4 inch Flat Head (FH), not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.346 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Package Quantity:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514046022\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 8.75 x 7.13 x 2.88 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 046108-1 cleat made from?\u003c\/strong\u003e The Sea-Dog 046108-1 Flat Head Open Base Cleat is made of die cast aluminum, chosen for its corrosion resistance in marine settings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this cleat?\u003c\/strong\u003e The 046108-1 has an 8 inch overall length, with a base width of 1-1\/2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners does the 046108-1 cleat require?\u003c\/strong\u003e It installs with two 1\/4 inch flat head (FH) fasteners, which are not included with the cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat sold as a single unit or a pair?\u003c\/strong\u003e The Sea-Dog 046108-1 is sold individually, one cleat per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is the 046108-1 designed for?\u003c\/strong\u003e It is designed for mounting on aluminum docks, vessels, or other aluminum surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this cleat have an open base design?\u003c\/strong\u003e The open base on the 046108-1 features a large footprint that spreads mooring and docking loads evenly, reducing stress on the fasteners and mounting surface compared to a smaller base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 046108-1 cleat weigh?\u003c\/strong\u003e It weighs 0.346 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the flush flat head design matter for installation?\u003c\/strong\u003e Yes, the flat head (FH) fastener style used with the 046108-1 lets the fastener heads sit flush with the base for a clean, low-profile mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 046108-1 cleat?\u003c\/strong\u003e Its dimensions are 8 inches by 1-7\/8 inches by 1-1\/2 inches by 2-11\/16 inches, as measured across the cleat body and base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 046108-1 suitable for permanent or removable installations?\u003c\/strong\u003e It is a fastener-mounted cleat (not welded), installed with two flat head fasteners, making it suitable for standard bolt-on mounting rather than a welded permanent install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the 046108-1 cleat?\u003c\/strong\u003e This cleat is manufactured by Sea-Dog.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many of these cleats come in a standard package?\u003c\/strong\u003e The 046108-1 has a standard pack quantity of 10 each, though it is also available and sold individually.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544565467,"sku":"S-D-046108-1","price":10.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7478.jpg?v=1784421861"},{"product_id":"sea-dog-060040-1-bow-chocks-4-3-4-316-stainless-steel-left-right-pair-for-mooring-dock-lines","title":"Sea-Dog Bow Chock 060040-1, 316 Stainless Steel, 4-3\/4 Inch, Pair","description":"\u003cp\u003eThe Sea-Dog Bow Chock 060040-1 gives your mooring and dock lines a smooth, controlled lead off the bow, protecting your deck from abrasion caused by working lines under load. Each chock is designed with rounded edges set at a proper slant, a shape that prevents chafing as the line moves with the boat's motion. This part is sold as a matched pair, with both the left (port) and right (starboard) bow chocks included, so one purchase outfits both sides of the bow.\u003c\/p\u003e\u003cp\u003eConstruction is investment cast 316 stainless steel, a grade chosen for its resistance to marine corrosion and its strength under the repeated load of mooring and dock lines. The chock measures 4-3\/4 inches along its A dimension, with a 5\/8 inch B dimension, a 1\/2 inch C dimension, and a 3-1\/4 inch D dimension, and each chock mounts with a #10 flat head fastener (fasteners are not included and must be sourced separately). At 0.27 pounds, it is a compact, low-profile fitting suited to the bow of small to mid-size boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 060040-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bow Chock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 4-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 3-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 Flat Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.27 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Left and right bow chocks (pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal deck fitting, not restricted to a specific make, model, or year of boat.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 060040-1 bow chock made of?\u003c\/strong\u003e The 060040-1 bow chock is made of investment cast 316 stainless steel, a corrosion-resistant grade suited to saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bow chock come as a pair?\u003c\/strong\u003e Yes, part number 060040-1 is sold as a matched pair and includes both the left and right bow chock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 060040-1 bow chock?\u003c\/strong\u003e The 060040-1 bow chock measures 4-3\/4 inches (dimension A), 5\/8 inches (dimension B), 1\/2 inches (dimension C), and 3-1\/4 inches (dimension D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the bow chock weigh?\u003c\/strong\u003e Each Sea-Dog 060040-1 bow chock weighs 0.27 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fasteners does the 060040-1 bow chock use?\u003c\/strong\u003e This bow chock is designed to install with a #10 flat head fastener; fasteners are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with the bow chock?\u003c\/strong\u003e No, the Sea-Dog 060040-1 bow chock installs with two flat head fasteners that are not included and need to be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this bow chock and a Skene chock?\u003c\/strong\u003e The 060040-1 bow chock provides a smooth, slanted lead for mooring and dock lines, while a Skene chock has overlapping tips designed to keep the line from working free as the boat moves; both are made of investment cast 316 stainless steel but serve slightly different chafe-control purposes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this chock prevent my dock lines from chafing?\u003c\/strong\u003e Yes, the 060040-1 bow chock is designed with rounded edges set at a proper slant specifically to minimize chafing on mooring and dock lines under load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 060040-1 bow chock suitable for saltwater use?\u003c\/strong\u003e Yes, it is constructed of investment cast 316 stainless steel, a grade chosen for corrosion resistance in marine and saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 060040-1 fit a specific boat make or model?\u003c\/strong\u003e No, the Sea-Dog 060040-1 bow chock is a universal deck fitting and is not limited to a specific boat make, model, or year.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 'A' through 'D' measurements refer to on the bow chock?\u003c\/strong\u003e For the 060040-1 bow chock, these are the manufacturer's reference dimensions: A is 4-3\/4 inches, B is 5\/8 inches, C is 1\/2 inches, and D is 3-1\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the bow chock installed on the boat?\u003c\/strong\u003e The Sea-Dog 060040-1 bow chock is installed using two flat head (#10) fasteners per chock, which are not included with the part.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988544762075,"sku":"S-D-060040-1","price":40.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7485.jpg?v=1784421915"},{"product_id":"sea-dog-302110010bk-1-double-braided-nylon-dock-line-3-8-x-10-with-12-spliced-eye-black","title":"Sea-Dog Premium Double Braided Nylon Dock Line, 3\/8 Inch x 10 Feet, Black","description":"\u003cp\u003eThis Sea-Dog Premium Dock Line is a 3\/8 inch by 10 foot length of 100% double braided nylon rope built to secure boats to a dock, piling, or cleat. Double braided nylon construction combines a braided core and braided cover for a rope that is strong, resists abrasion, and has enough stretch to absorb the shock loads of wave action and wind without snapping taut against cleats and hardware. One end features a professionally spliced soft eye measuring 12 inches, ready to drop over a piling or cleat without any additional tying or hardware. Both the bitter end and the splice point are yacht whipped, a finishing technique that locks the braid in place so the rope will not fray or unravel with repeated use. This line is finished in black, giving it a low profile, understated appearance on deck or dock. It carries a working load limit of 825 pounds (376 kg) and a breaking strength of 3800 pounds (1880 kg), giving boat owners a clear reference point when matching line size to vessel weight and mooring conditions. Sea-Dog packages this dock line in a re-closeable plastic clamshell for retail sale and long-term storage between uses. It is a straightforward, ready-to-use mooring and docking line for recreational boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 302110010BK-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Double Braided\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye Length:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Load Limit:\u003c\/strong\u003e 825 pounds (376 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking Strength:\u003c\/strong\u003e 3800 pounds (1880 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.54 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 302110010BK-1 dock line?\u003c\/strong\u003e It is a 3\/8 inch diameter line that measures 10 feet long, with a 12 inch spliced eye at one end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this dock line made of nylon?\u003c\/strong\u003e Yes, the 302110010BK-1 is 100% double braided nylon, combining a braided core and cover for strength with some stretch to absorb shock loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this line?\u003c\/strong\u003e This version of the Sea-Dog dock line is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the line come with an eye already spliced?\u003c\/strong\u003e Yes, one end has a professionally spliced soft eye measuring 12 inches, so it can be looped over a cleat or piling without tying knots.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the working load limit and breaking strength?\u003c\/strong\u003e The Sea-Dog 302110010BK-1 has a working load limit of 825 pounds (376 kg) and a breaking strength of 3800 pounds (1880 kg).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this dock line weigh?\u003c\/strong\u003e This 10 foot, 3\/8 inch dock line weighs 0.54 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the rope end finished to prevent fraying?\u003c\/strong\u003e Yes, both the bitter end and the splice point of the 302110010BK-1 are yacht whipped, which locks the braid and prevents unraveling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the package?\u003c\/strong\u003e The Sea-Dog dock line ships as a single length of finished rope in a re-closeable plastic clamshell package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this line be used for mooring as well as docking?\u003c\/strong\u003e With a spliced eye at one end and double braided nylon construction, this 3\/8 inch by 10 foot line is suited to securing a boat to a dock, piling, or cleat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre longer lengths available in the same diameter and color?\u003c\/strong\u003e Sea-Dog offers this 3\/8 inch black double braided dock line in other lengths as well as additional colors, each under its own part number.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988636217563,"sku":"S-D-302110010BK-1","price":8.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8300_6691635f-d55b-43e9-a0bc-616c55678522.jpg?v=1784439648"},{"product_id":"sea-dog-5-8-in-x-20-ft-white-twisted-nylon-dock-line-15-in-spliced-eye-three-strand-with-superior-stretch-mpn-301116020wh-1","title":"Sea-Dog Twisted Nylon Dock Line 301116020WH-1, 5\/8 in x 20 ft, White, 15 in Eye","description":"\u003cp\u003eThe Sea-Dog 301116020WH-1 is a 5\/8 inch by 20 foot dock line built from 100% premium twisted three-strand nylon. Three-strand nylon construction gives the line superior stretch to absorb the shock loads created by boat wakes and harbor surges, helping protect cleats, chocks, and hull hardware from sudden jerking loads while the boat is tied up. The line also offers superior abrasion resistance to counteract chafe against pilings, cleats, and rub rails during normal dockside use. Each line is finished with a hand-spliced eye using five tucks for a secure, reliable termination, and the line is yacht whipped at both the bitter end and the splice point to prevent fraying. The white finish matches light-colored hulls and fender lines for a clean look at the dock. This dock line is rated for a working load of 900 to 1980 pounds and a breaking strength of 4500 to 9100 pounds, making it suitable for securing boats of a size appropriate to this line diameter and length at a dock or mooring.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 301116020WH-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dock Line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye Length:\u003c\/strong\u003e 15 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 100% Twisted Three-Strand Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Load:\u003c\/strong\u003e 900 to 1980 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking Strength:\u003c\/strong\u003e 4500 to 9100 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.31 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplice:\u003c\/strong\u003e Hand-spliced with five tucks, yacht whipped at the bitter end and splice point\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 301116020WH-1 dock line?\u003c\/strong\u003e This dock line measures 5\/8 inch in diameter and 20 feet in length, with a 15 inch spliced eye at one end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this dock line made from?\u003c\/strong\u003e The 301116020WH-1 is made from 100% premium twisted three-strand nylon, chosen for its stretch and abrasion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can this dock line hold?\u003c\/strong\u003e The Sea-Dog 301116020WH-1 has a working load rating of 900 to 1980 pounds and a breaking strength of 4500 to 9100 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the eye on this dock line hand-spliced?\u003c\/strong\u003e Yes, the eye on the 301116020WH-1 is hand-spliced with five tucks for a secure termination.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the line have finished ends to prevent fraying?\u003c\/strong\u003e Both the bitter end and the splice point of this Sea-Dog dock line are yacht whipped to prevent the nylon strands from unraveling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 301116020WH-1 dock line?\u003c\/strong\u003e This dock line is white, which pairs well with light-colored hulls and fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose twisted three-strand nylon over other rope constructions?\u003c\/strong\u003e Twisted three-strand nylon provides superior stretch for absorbing the shock loads created by boat wakes and harbor surges, along with strong abrasion resistance against chafe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this dock line weigh?\u003c\/strong\u003e The Sea-Dog 301116020WH-1 dock line weighs 2.31 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this line be used in saltwater environments?\u003c\/strong\u003e Nylon dock lines like the 301116020WH-1 are a standard material for marine mooring and docking use in wet, saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this dock line?\u003c\/strong\u003e You receive one 301116020WH-1 dock line: a 5\/8 inch by 20 foot twisted nylon line with a hand-spliced 15 inch eye at one end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this dock line resistant to chafing against pilings and cleats?\u003c\/strong\u003e Yes, the twisted nylon construction of the 301116020WH-1 offers superior abrasion resistance to counteract chafe at the dock.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988636610779,"sku":"S-D-301116020WH-1","price":25.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6493_322e77a9-68d1-4cbc-8263-c6effef7fc7d.png?v=1784423825"},{"product_id":"sea-dog-302112015bk-1-double-braided-nylon-dock-line-1-2-x-15-black-with-12-spliced-soft-eye","title":"Sea-Dog Double Braided Nylon Dock Line with Reflective Tracer, 1\/2 Inch x 15 Feet, Black","description":"\u003cp\u003eThis Sea-Dog dock line is built from 100% premium double braided nylon, giving it high tensile strength combined with excellent shock absorption to cushion your boat against dock impacts, wave surge, and wake action. The line measures 1\/2 inch in diameter and 15 feet in length, with a 12 inch eye at one end for looping over a cleat or piling. A reflective tracer is woven into the line and stays visible up to 200 feet, making it easier to spot your dock lines at night or in low light.\u003c\/p\u003e\u003cp\u003eEach line features a professionally spliced soft eye rather than a hand-tied loop, giving a cleaner, stronger termination, and the bitter end is yacht whipped along with the splice point to prevent fraying. The double braided nylon construction resists rot, abrasion, mildew, oil, and UV rays, making this line suitable for regular use in a marine environment. This black 1\/2 inch x 15 foot line is sold individually and arrives in a re-closeable plastic clamshell package for easy storage.\u003c\/p\u003e\u003cp\u003eThis dock line works as a bow, stern, or spring line for boats sized to a 1\/2 inch line diameter, and is a straightforward replacement for a worn, frayed, or undersized existing dock line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 302112015BK-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 15 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye Length:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 2.56 x 5.91 x 9.84 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514302296\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this Sea-Dog dock line?\u003c\/strong\u003e This Sea-Dog dock line (302112015BK-1) is 1\/2 inch in diameter and 15 feet long, with a 12 inch spliced eye at one end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 302112015BK-1 dock line made from?\u003c\/strong\u003e It is made from 100% premium double braided nylon, which resists rot, abrasion, mildew, oil, and UV rays.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this dock line have a reflective feature?\u003c\/strong\u003e Yes, the Sea-Dog 302112015BK-1 has a reflective tracer woven into the line that stays visible up to 200 feet, helping you spot the line at night or in low light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the eye at the end of the line hand-tied or spliced?\u003c\/strong\u003e The eye is professionally spliced rather than hand-tied, and the bitter end is yacht whipped along with the splice point for a clean, durable finish on this Sea-Dog dock line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many lines come in a package?\u003c\/strong\u003e This listing is for a single 1\/2 inch x 15 foot black dock line (part number 302112015BK-1), packaged in a re-closeable plastic clamshell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 302112015BK-1 dock line?\u003c\/strong\u003e This dock line is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this dock line be used as a spring line or only bow\/stern?\u003c\/strong\u003e The 1\/2 inch Sea-Dog dock line can be used as a bow, stern, or spring line, since it is a standard eye-splice mooring line rather than a role-specific design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this dock line weigh?\u003c\/strong\u003e The Sea-Dog 302112015BK-1 dock line weighs 1.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs double braided nylon better than single braid or twisted nylon for dock lines?\u003c\/strong\u003e Double braided nylon construction, as used in the Sea-Dog 302112015BK-1, provides higher tensile strength and better shock absorption than single braid or twisted nylon lines, which helps cushion sudden loads on cleats and pilings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this dock line hold up outdoors long term?\u003c\/strong\u003e Yes, the double braided nylon in this Sea-Dog dock line is resistant to rot, abrasion, mildew, oil, and UV rays, so it is designed for ongoing outdoor and marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The UPC for the Sea-Dog 302112015BK-1 dock line is 035514302296.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988643524827,"sku":"S-D-302112015BK-1","price":15.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8300_79c92959-3908-4745-85c8-4f72c5e720a9.jpg?v=1784439656"},{"product_id":"sea-dog-300097-3-economy-handheld-rope-cutter-soldering-gun-120v-100w-hot-knife-for-nylon-polyester-dacron-line","title":"Sea-Dog Economy Handheld Rope Cutter and Soldering Gun, 120V\/100W, Cuts and Heat Seals Nylon, Polyester, Polypropylene, and Dacron Line","description":"\u003cp\u003eThe Sea-Dog Economy Handheld Rope Cutter and Soldering Gun (300097-3) is a corded electric tool built to cut and heat seal nylon, polyester, polypropylene, and Dacron cordage and webbing in one step. Its replaceable blade heats to 700 degrees Fahrenheit (400 degrees Celsius), melting through synthetic line and fusing the cut end so it will not fray or unravel. Because the same tool doubles as a soldering gun, it ships with both a replaceable blade and a soldering tip so it can be switched from rope-cutting duty to soldering work as needed.\u003c\/p\u003e\u003cp\u003eThe tool is constructed of steel and plastic and runs on a 100 watt, 120 volt AC power supply through a 4 foot cord, and it is UL listed. It can handle rope up to 1-3\/4 inches in diameter. This makes it a practical choice for boat owners, riggers, and canvas or webbing shops that need a fast, clean way to trim and finish synthetic line ends without a separate cutting tool and lighter or torch. A replacement blade is sold separately under Sea-Dog part number 300098-1 for when the original blade wears out.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 300097-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 9-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 6-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Rope Size:\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 120 volts AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 100 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.77 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\/Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Corded Electric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCord Length:\u003c\/strong\u003e 4 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Blade Temperature:\u003c\/strong\u003e 700 degrees Fahrenheit (400 degrees Celsius)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e UL Listed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Replaceable blade and soldering tip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat materials can the Sea-Dog 300097-3 rope cutter cut?\u003c\/strong\u003e It cuts and heat seals nylon, polyester, polypropylene, and Dacron cordage and webbing, fusing the cut end so it will not fray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this tool also work as a soldering iron?\u003c\/strong\u003e Yes, the Sea-Dog Economy Handheld Rope Cutter and Soldering Gun is dual purpose and includes a soldering tip in addition to its replaceable cutting blade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow hot does the blade get?\u003c\/strong\u003e The blade on the 300097-3 heats to 700 degrees Fahrenheit (400 degrees Celsius), which is hot enough to melt and seal synthetic line in one pass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the blade replaceable?\u003c\/strong\u003e Yes, the blade is replaceable, and Sea-Dog sells a replacement blade separately under part number 300098-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power does the rope cutter require?\u003c\/strong\u003e It runs on 100 watts at 120 volts AC and comes with a 4 foot power cord.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog rope cutter safety listed?\u003c\/strong\u003e The 300097-3 is UL listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum rope diameter this tool can cut?\u003c\/strong\u003e The Sea-Dog Economy Rope Cutter is rated for rope up to 1-3\/4 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the rope cutter made of?\u003c\/strong\u003e It is constructed of steel and plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 300097-3 rope cutter?\u003c\/strong\u003e The tool ships with a replaceable blade and a soldering tip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog rope cutter weigh?\u003c\/strong\u003e It weighs 0.77 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the rope cutter?\u003c\/strong\u003e The 300097-3 measures 9-1\/4 inches by 6-3\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be used on webbing as well as rope?\u003c\/strong\u003e Yes, the Sea-Dog Economy Handheld Rope Cutter and Soldering Gun is designed to cut and heat seal both cordage and webbing made from nylon, polyester, polypropylene, or Dacron.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988648177883,"sku":"S-D-300097-3","price":59.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6712.jpg?v=1784424150"},{"product_id":"sea-dog-301110010wh-1-twisted-nylon-dock-line-3-8-x-10-ft-white-with-12-spliced-eye","title":"Sea-Dog Twisted Nylon Dock Line, 3\/8 Inch x 10 Feet, White, 12 Inch Eye Splice","description":"\u003cp\u003eThis Sea-Dog dock line is a 3\/8 inch x 10 foot twisted nylon mooring line finished in white, built to secure boats to the dock while absorbing the shock loads of wakes and harbor surge. It is constructed from 100% premium twisted three-strand nylon, a fiber prized for docking use because it combines high strength with superior stretch, letting the line flex under sudden loads instead of transmitting that shock straight to your boat's cleats and hardware. The twisted construction also gives strong resistance to abrasion and chafe, an important trait for a line that will run through chocks and rub against pilings or dock edges over repeated use.\u003c\/p\u003e\u003cp\u003eEach end is finished by hand: a 12 inch eye is professionally hand-spliced with five tucks for a secure, reliable loop that drops straight over a piling or cleat, and the bitter end is yacht whipped to prevent fraying. This line is rated for a working load limit of 370 kilograms (815 pounds) and a breaking strength of 1850 kilograms (3750 pounds), and it weighs 0.53 pounds. It suits boats that call for a 3\/8 inch diameter dock line in a 10 foot length, and the white color option lets owners match existing line colors or deck hardware. Sea-Dog offers this same 301110010 line in other lengths and colors under related part numbers, so buyers can match multiple lines across their boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 301110010WH-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye Size:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon (twisted three-strand)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Load Limit:\u003c\/strong\u003e 370 kgs \/ 815 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking Strength:\u003c\/strong\u003e 1850 kgs \/ 3750 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.53 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514301480\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 12 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 301110010WH-1 dock line?\u003c\/strong\u003e This dock line measures 3\/8 inch in diameter and 10 feet in length, with a 12 inch eye spliced into one end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this dock line made from nylon?\u003c\/strong\u003e Yes, the 301110010WH-1 is constructed from 100% premium twisted three-strand nylon, chosen for its strength and stretch under shock loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the working load limit and breaking strength?\u003c\/strong\u003e The 3\/8 inch x 10 foot Sea-Dog dock line carries a working load limit of 370 kgs (815 lbs) and a breaking strength of 1850 kgs (3750 lbs).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this dock line weigh?\u003c\/strong\u003e This Sea-Dog line weighs 0.53 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the line come with an eye splice already made?\u003c\/strong\u003e Yes, each 301110010WH-1 line has a 12 inch eye that is professionally hand-spliced with five tucks, so it is ready to drop over a piling or cleat without any additional splicing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the free end finished to prevent fraying?\u003c\/strong\u003e The bitter end of this dock line is yacht whipped, along with the splice point, to keep the twisted nylon from unraveling with use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose twisted nylon over braided line for docking?\u003c\/strong\u003e Twisted three-strand nylon, like this Sea-Dog 301110010WH-1, offers high stretch to absorb the shock loads of boat wakes and harbor surge while still resisting abrasion and chafe from chocks and pilings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this dock line?\u003c\/strong\u003e The 301110010WH-1 is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this dock line sold as a single line?\u003c\/strong\u003e Yes, this listing is for one 3\/8 inch x 10 foot white dock line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre other lengths or colors of this dock line available?\u003c\/strong\u003e Sea-Dog offers the same 3\/8 inch twisted nylon dock line in other lengths, including 15, 20, 25, and 50 foot versions, and in black and blue in addition to the white of the 301110010WH-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Sea-Dog dock line?\u003c\/strong\u003e The UPC for the 3\/8 inch x 10 foot white Sea-Dog dock line (301110010WH-1) is 035514301480.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988648210651,"sku":"S-D-301110010WH-1","price":6.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6493_74b511d4-589c-497e-9a8d-76ba3661b960.png?v=1784424189"},{"product_id":"sea-dog-double-braided-nylon-dock-line-3-4-x-25-gold-white-with-18-spliced-eye-mpn-302119025g-w-1","title":"Sea-Dog Double Braided Nylon Dock Line, 3\/4 Inch x 25 Feet, Gold\/White with 18 Inch Spliced Eye","description":"\u003cp\u003eThis Sea-Dog Double Braided Nylon Dock Line is a 3\/4 inch by 25 foot mooring line built from 100% premium double braided nylon, engineered to combine strength with the shock absorption boaters need when tying up in changing tides and wake. The line features a professionally spliced soft eye at one end, measuring 18 inches, for quick and secure attachment to a cleat or piling, while the bitter end is yacht whipped along with the splice point for a clean, finished look that resists fraying. The Gold\/White color combination makes this line easy to spot on deck and at the dock while complementing light-hulled boats and gold accent hardware. Double braided nylon construction gives the line good abrasion resistance and the elasticity to absorb shock loads, making it a good choice for dock lines, mooring lines, and general utility line aboard a boat. This 3\/4 inch x 25 foot Gold\/White dock line ships in an attractive, reusable clamshell package for easy storage and reuse once the line is removed from the pack. Sea-Dog offers this same double braided nylon dock line across a range of diameters, lengths, and colors, so boaters can match line size to their vessel and cleat hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 302119025G\/W-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye Length:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gold\/White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 100% premium double braided nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.68 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 6 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Professionally spliced soft eye; yacht whipped bitter end and splice point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Reusable clamshell package\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this Sea-Dog dock line?\u003c\/strong\u003e This Sea-Dog dock line measures 3\/4 inch in diameter and 25 feet in length, with an 18 inch spliced eye at one end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 302119025G\/W-1?\u003c\/strong\u003e Part number 302119025G\/W-1 is finished in Gold\/White, one of several color options Sea-Dog offers in this 3\/4 inch x 25 foot double braided dock line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog dock line made from?\u003c\/strong\u003e It is made from 100% premium double braided nylon, a construction chosen for its combination of strength and shock-absorbing stretch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this dock line come with an eye splice already installed?\u003c\/strong\u003e Yes, the 302119025G\/W-1 dock line has a professionally spliced soft eye measuring 18 inches at one end, ready to loop over a cleat or piling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the free end of the line finished, or does it need to be whipped?\u003c\/strong\u003e The bitter end is already yacht whipped, along with the splice point, so the line arrives finished and resistant to fraying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this dock line weigh?\u003c\/strong\u003e This 3\/4 inch x 25 foot Gold\/White dock line weighs 3.68 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this dock line?\u003c\/strong\u003e Each order includes one 3\/4 inch x 25 foot Sea-Dog double braided nylon dock line, packaged in a reusable clamshell package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs double braided nylon a good choice for a dock line?\u003c\/strong\u003e Double braided nylon is a common choice for dock lines because it holds up to abrasion at the cleat and piling while stretching to absorb shock loads from wave and wake action.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this line for mooring instead of docking?\u003c\/strong\u003e The 302119025G\/W-1 double braided nylon line is suited to general dock and mooring use aboard a boat, thanks to its strength and shock-absorbing stretch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sea-Dog make this dock line in other sizes or colors?\u003c\/strong\u003e Yes, Sea-Dog produces this double braided nylon dock line in a range of diameters, lengths, and colors, including Black, White, and Gold\/White options, each under its own part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an authentic Sea-Dog product?\u003c\/strong\u003e Yes, this dock line is manufactured by Sea-Dog under part number 302119025G\/W-1, not a generic or aftermarket copy.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988650471643,"sku":"S-D-302119025G-W-1","price":58.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71eedWGfMIS.jpg?v=1784424650"},{"product_id":"sea-dog-327110-1-rail-mount-loop-fender-cleat-with-clamcleat-cub-cleat-nylon-stainless-for-7-8-to-1-rails","title":"Sea-Dog Rail Mount Loop Cleat Fender Holder 327110-1 for 1\/8 to 1\/4 Inch Rope","description":"\u003cp\u003eThe Sea-Dog Rail Mount Loop Cleat Fender Holder (327110-1) is a compact, economical fitting that lets you attach fenders quickly using rope up to 1\/4 inch in diameter. It mounts to a boat's rail and includes a Clamcleat Cub Cleat-CL232 (002320), a jam-cleat style fitting that grips and releases the fender line without knots, so you can adjust fender height in seconds. The body is constructed of UV resistant injection molded nylon paired with stainless steel hardware, giving it long-term resistance to sun, salt spray, and marine weathering without corroding or becoming brittle.\u003c\/p\u003e\u003cp\u003eThis cleat is designed specifically for fender lines and accepts rope from 1\/8 inch up to 1\/4 inch in diameter. It is a simple, low-cost way to keep fenders positioned and secure along a rail without drilling or permanent line splicing. Sea-Dog also offers related rail mount accessories, including a rail mount cleat, fairlead, hooks, and holders, sold as separate part numbers for different mounting and rigging needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 327110-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rail Mount Loop Cleat Fender Holder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Cleat:\u003c\/strong\u003e Clamcleat Cub Cleat-CL232 (002320)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Nylon with Stainless Steel Hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Size (A):\u003c\/strong\u003e 1\/8 inch - 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension (B):\u003c\/strong\u003e 7\/8 inch - 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.23 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Screw-In\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Resistance:\u003c\/strong\u003e UV resistant nylon construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514327046\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit (boat rail mount)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal rail mount accessory; fits boat rails accepting standard rail mount hardware. Not vehicle- or engine-specific.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rope does the Sea-Dog 327110-1 rail mount cleat accept?\u003c\/strong\u003e The Sea-Dog Rail Mount Loop Cleat Fender Holder (327110-1) accepts fender rope from 1\/8 inch up to 1\/4 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cleat mechanism is included with part number 327110-1?\u003c\/strong\u003e It includes a Clamcleat Cub Cleat-CL232, a jam-cleat style fitting that grips the fender line and releases it with a simple pull, so no knot-tying is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 327110-1 fender cleat made of?\u003c\/strong\u003e The Sea-Dog 327110-1 is built from UV resistant injection molded nylon with stainless steel hardware, giving it corrosion resistance for saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog Rail Mount Loop Cleat Fender Holder weigh?\u003c\/strong\u003e This fender cleat, Sea-Dog part number 327110-1, weighs 0.23 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 327110-1 mounted on a boat?\u003c\/strong\u003e It is a rail mount fitting, installed with screw-in hardware onto a boat's rail, and is dimensioned to fit rails in the 7\/8 inch to 1 inch range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cleat resistant to sun and saltwater exposure?\u003c\/strong\u003e Yes, the nylon body of the 327110-1 is UV resistant, and the hardware is stainless steel, so it holds up to sun and marine spray without becoming brittle or rusting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 327110-1 work with any boat rail?\u003c\/strong\u003e This is a universal fit rail mount accessory intended for attachment to a boat's rail rather than a specific make, model, or engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog Rail Mount Loop Cleat Fender Holder?\u003c\/strong\u003e The 327110-1 fender cleat is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 327110-1 the same as the Sea-Dog Rail Mount Cleat 327111-1?\u003c\/strong\u003e No, they are different part numbers. The 327110-1 is a loop cleat fender holder built around a Clamcleat Cub Cleat-CL232 for fender lines up to 1\/4 inch, while the 327111-1 is a separate rail mount cleat with a Heavy Duty Cleat, sized differently and intended for a broader range of tie-down uses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 327110-1?\u003c\/strong\u003e The Sea-Dog Rail Mount Loop Cleat Fender Holder ships with the mounting body and its integrated Clamcleat Cub Cleat-CL232 (002320) fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 327110-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, 327110-1 is the genuine Sea-Dog manufacturer part number for this rail mount loop cleat fender holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this cleat primarily used for?\u003c\/strong\u003e The Sea-Dog 327110-1 is primarily used to attach and adjust boat fenders along a rail using rope up to 1\/4 inch in diameter.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988680585435,"sku":"S-D-327110-1","price":13.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4645.jpg?v=1784427339"},{"product_id":"sea-dog-327359-1-rail-mount-dual-fender-holder-9-1-2-inch-304-stainless-steel-for-7-8-to-1-inch-rails","title":"Sea-Dog Rail Mount Dual Fender Holder, 9-1\/2 Inch, 304 Stainless Steel, Fits 7\/8-1 Inch Rail","description":"\u003cp\u003eThe Sea-Dog Rail Mount Dual Fender Holder (327359-1) clamps onto boat railing to hold two fenders at any angle, keeping them positioned exactly where you need them along the hull. It is built for 7\/8 inch to 1 inch diameter tubing and adjusts to match the angle of the rail it is mounted on, so it sits flush and secure on straight runs, corners, or angled rail sections alike. This 9-1\/2 inch size holder is one of a range of Sea-Dog rail mount fender holders offered in different lengths.\u003c\/p\u003e\u003cp\u003eConstruction is formed 304 stainless steel, chosen for its resistance to corrosion in salt and fresh water environments, so the holder stands up to continuous marine exposure without rusting or pitting. Installation is straightforward: the mount clamps directly to the rail with no drilling required, and the holder folds flat against the rail for compact storage when fenders are not in use. It works with any style of fender, though fenders themselves are sold separately and not included with this holder.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 327359-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rail Mount Dual Fender Holder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength (A):\u003c\/strong\u003e 9-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Diameter Fit (B):\u003c\/strong\u003e 7\/8 inch to 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.32 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Formed 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFenders Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514327893\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal fit for boat rails measuring 7\/8 inch to 1 inch in diameter\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rail does the Sea-Dog 327359-1 fender holder fit?\u003c\/strong\u003e This holder is made for rail tubing measuring 7\/8 inch to 1 inch in diameter, and it adjusts to match whatever angle that rail section runs at.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Sea-Dog 327359-1 fender holder?\u003c\/strong\u003e It measures 9-1\/2 inches, the middle size in Sea-Dog's rail mount dual fender holder lineup, which also includes a 7-1\/2 inch and an 11-1\/2 inch version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fender holder come with fenders?\u003c\/strong\u003e No, fenders are not included with the Sea-Dog 327359-1; it holds fenders you already own or purchase separately, and it works with any style of fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fender holder made of?\u003c\/strong\u003e The Sea-Dog 327359-1 is constructed of formed 304 stainless steel, a corrosion resistant grade suited to continuous salt and fresh water exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 327359-1 weigh?\u003c\/strong\u003e It weighs 2.32 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the holder mount to the boat?\u003c\/strong\u003e It clamps directly onto rail tubing between 7\/8 inch and 1 inch in diameter, with no drilling required to install it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this holder be adjusted to angled rail sections?\u003c\/strong\u003e Yes, the Sea-Dog 327359-1 adjusts to any angle of railing, so it mounts securely on straight runs, corners, or slanted rail sections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fender holder fold down when not holding a fender?\u003c\/strong\u003e Yes, it folds flat against the rail for compact storage when it is not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fenders does this holder hold?\u003c\/strong\u003e The 327359-1 is a dual fender holder, meaning it is designed to hold two fenders at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 327359-1?\u003c\/strong\u003e The UPC is 035514327893.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 327359-1 different from Sea-Dog's other rail mount fender holders?\u003c\/strong\u003e It is the 9-1\/2 inch length version; Sea-Dog also offers a 7-1\/2 inch holder (327357-1) and an 11-1\/2 inch holder (327361-1) for the same 7\/8 inch to 1 inch rail tubing.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988752642267,"sku":"S-D-327359-1","price":121.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5576.jpg?v=1784428743"},{"product_id":"sea-dog-327234-1-nylon-loop-cleat-clamcleat-cl223w-white-fender-line-cleat-for-1-8-to-1-4-in-rope","title":"Sea-Dog Nylon Fender Cleat 327234-1, White, for 1\/4 to 1\/2 Inch Line","description":"\u003cp\u003eThe Sea-Dog Nylon Fender Cleat (327234-1) is a compact cam-style cleat used to lock off fender lines, flag halyards, and other small-diameter rope on board. It accepts line from 1\/4 inch up to 1\/2 inch in diameter, letting one cleat handle a range of fender and accessory line sizes without needing a separate cleat for each rope thickness. The cleat is molded in white nylon for a clean look that blends with white hull sides, rail systems, and cockpit trim, and it uses a J-hook style fastener for mounting. This design lets a boat owner drop a fender line into the cleat and cam it in place quickly, then release it just as fast when repositioning fenders or stowing gear, which is especially useful when docking or rafting up where fenders need frequent adjustment. Because it is a simple mechanical cleat with no moving springs or electronics, it holds up well to sun, saltwater spray, and repeated use. At 0.132 pounds it is lightweight enough to mount on rails, gunwales, or cockpit surfaces without adding noticeable weight, and it ships as a single cleat (unit count of 1) ready to install.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 327234-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e J-Hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Line Diameter:\u003c\/strong\u003e 1\/4 inch to 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.132 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1 cleat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Vehicle Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514327169\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat line diameter does the Sea-Dog 327234-1 fender cleat accept?\u003c\/strong\u003e The Sea-Dog Nylon Fender Cleat 327234-1 is rated for line from 1\/4 inch up to 1\/2 inch in diameter, covering most common fender and accessory line sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this cleat made of?\u003c\/strong\u003e It is molded from nylon, which resists sun and saltwater exposure better than untreated metal fittings and will not corrode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 327234-1 fender cleat?\u003c\/strong\u003e It is finished in white, matching typical white hull, rail, and cockpit trim on most boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog 327234-1 mounted?\u003c\/strong\u003e The cleat uses a J-hook style fastener for attachment rather than a standard screw-down base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fender cleat weigh?\u003c\/strong\u003e The Sea-Dog 327234-1 weighs 0.132 pounds, making it light enough for rail or gunwale mounting without adding noticeable weight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part number 327234-1?\u003c\/strong\u003e Each order includes one Sea-Dog nylon fender cleat, listed with a package quantity of 1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cleat be used for anything besides fender lines?\u003c\/strong\u003e Yes, a cam-style cleat like the 327234-1 can also secure flag halyards, canvas tie-downs, and other small-diameter line, not just fender lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 327234-1 genuine Sea-Dog hardware?\u003c\/strong\u003e Yes, 327234-1 is the manufacturer part number assigned directly by Sea-Dog for this nylon fender cleat, not an aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cleat work on a boat with a black or dark colored rail?\u003c\/strong\u003e The 327234-1 is molded in white, so it will contrast against dark rails and hull surfaces rather than blend in; buyers wanting a different finish should confirm color before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the rope release easily from this cleat?\u003c\/strong\u003e The cam action of a cleat like the Sea-Dog 327234-1 is designed to grip line under load while still allowing quick release when repositioning fenders.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988754673883,"sku":"S-D-327234-1","price":10.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4645_4ee17092-49d7-4d80-9fd8-86d6fc970928.jpg?v=1784428770"},{"product_id":"sea-dog-327200-1-rail-mount-loop-cleat-fender-holder-oem-702769-fits-7-8in-1in-rails-and-3-16in-1-4in-lifelines-white-marine-nylon-pair","title":"Sea-Dog Fendermate 327200-1 Nylon Fender Bracket for 7\/8 to 1 Inch Rail and 1\/4 to 5\/16 Inch Line, White (Pair)","description":"\u003cp\u003eThe Sea-Dog Fendermate 327200-1 is an adjustable fender bracket built to hold boat fenders securely at the correct height on rail or lifeline mounting. Made of marine grade reinforced injection molded nylon, the clamp body resists corrosion and UV breakdown better than metal hardware while still standing up to constant flexing and sun exposure at the dock or underway. It clamps directly onto 7\/8 inch or 1 inch round tubing, or onto 3\/16 inch or 1\/4 inch lifeline wire, making it a fit for the most common railing and lifeline diameters found on recreational boats. A rope or line size of 1\/4 inch to 5\/16 inch runs through the bracket to suspend the fender.\u003c\/p\u003e\u003cp\u003eThe design uses a unique double locking action: the first lock clamps the bracket onto the rail or wire while still allowing the fender height to be freely adjusted up or down. Once the fender sits at the desired height, a second locking action clamps down on the rope quickly and securely, so the fender stays in place instead of sliding or slipping. This two-step process makes it fast to reposition fenders when docking on different sides or at different tide heights, without needing tools. Finished in white, the bracket is sold as a pair (two brackets) and each bracket weighs 0.272 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 327200-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fendermate fender bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine grade reinforced injection molded nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail\/Tubing Compatibility:\u003c\/strong\u003e 7\/8 inch and 1 inch round tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifeline Wire Compatibility:\u003c\/strong\u003e 3\/16 inch and 1\/4 inch wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope\/Line Size:\u003c\/strong\u003e 1\/4 inch to 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Double locking clamp action\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.272 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair (2 brackets)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514327121\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 702769\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRail or tubing diameter: 7\/8 inch or 1 inch round tubing\u003c\/li\u003e\n\u003cli\u003eLifeline wire diameter: 3\/16 inch or 1\/4 inch\u003c\/li\u003e\n\u003cli\u003eFender line\/rope diameter: 1\/4 inch to 5\/16 inch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e702769\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sea-Dog Fendermate 327200-1 fit onto?\u003c\/strong\u003e The Fendermate 327200-1 clamps onto 7\/8 inch or 1 inch round tubing, and also onto 3\/16 inch or 1\/4 inch lifeline wire, covering the most common boat railing and lifeline sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part 702769 the same as the Sea-Dog 327200-1?\u003c\/strong\u003e Yes, 702769 is the OEM cross-reference number for the Sea-Dog Fendermate 327200-1 fender bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rope or line diameter works with this fender bracket?\u003c\/strong\u003e The 327200-1 accepts a fender line diameter of 1\/4 inch to 5\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many brackets come in one order?\u003c\/strong\u003e The Fendermate 327200-1 is sold as a pair, so two fender brackets are included per order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog Fendermate made from?\u003c\/strong\u003e It is made of marine grade reinforced injection molded nylon, chosen for corrosion resistance and durability in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the fender height adjust once the bracket is mounted?\u003c\/strong\u003e The 327200-1 uses a double locking action: the first lock secures the bracket to the rail or wire while still allowing the fender height to be freely raised or lowered, and the second lock clamps the rope once the height is set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does one Sea-Dog 327200-1 bracket weigh?\u003c\/strong\u003e Each Fendermate 327200-1 bracket weighs 0.272 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 327200-1 fender bracket?\u003c\/strong\u003e The Sea-Dog Fendermate 327200-1 is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this bracket be used on a boat with 1 inch diameter rails?\u003c\/strong\u003e Yes, the 327200-1 is designed to clamp securely onto 1 inch round tubing as well as 7\/8 inch tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 327200-1 work on lifeline wire instead of a tube rail?\u003c\/strong\u003e Yes, in addition to round tubing, the Fendermate 327200-1 clamps onto 3\/16 inch or 1\/4 inch lifeline wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog Fendermate genuine Sea-Dog hardware or an aftermarket copy?\u003c\/strong\u003e The 327200-1 is a genuine Sea-Dog manufactured part, identified by manufacturer part number 327200-1 and UPC 035514327121.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fender bracket come with tools required for installation?\u003c\/strong\u003e No tools are required; the double locking action of the 327200-1 is designed for tool-free hand clamping onto the rail, wire, and fender line.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988754706651,"sku":"S-D-327200-1","price":15.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4645_ed3d06da-e129-4ff4-8b6d-5fff30674350.jpg?v=1784428778"},{"product_id":"sea-dog-562008-1-stainless-steel-splicing-fid-with-hardwood-handle-fits-1-8-to-1-2-rope","title":"Sea-Dog Stainless Steel Splicing Fid with Hardwood Handle, 1\/8 to 1\/2 Inch Rope, 562008-1","description":"\u003cp\u003eThe Sea-Dog Splicing Fid is a purpose-built hand tool for expert rope splicing, designed to guide rope strands cleanly through a splice for tighter, neater results. Its time-tested design pairs a precision stainless steel tip with a hardwood handle, giving the user both durability and a comfortable, controlled grip during repeated splicing work. The tapered tip is shaped to part rope fibers smoothly rather than forcing them, which helps produce cleaner braids and improves the overall strength and appearance of the finished splice.\u003c\/p\u003e\u003cp\u003eThis fid is sized for rope from 1\/8 inch up to 1\/2 inch in diameter, making it suited for dock lines, small craft rigging, fender lines, and general marine cordage work. The stainless steel construction resists corrosion in a marine environment, while the hardwood handle stands up to repeated use without becoming slick or uncomfortable. At just under 7 inches long, it is compact enough to store in a tool bag, tackle box, or dock box for whenever a splice repair or new line needs to be made.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 562008-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Splicing Fid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel with hardwood handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Size Range:\u003c\/strong\u003e 1\/8 inch to 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6-13\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514562010\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat rope sizes does the Sea-Dog 562008-1 splicing fid work with?\u003c\/strong\u003e This fid is sized for rope from 1\/8 inch up to 1\/2 inch in diameter, covering most dock line and small craft rigging sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the splicing fid made of?\u003c\/strong\u003e The Sea-Dog 562008-1 is constructed of stainless steel with a hardwood handle, combining corrosion resistance with a comfortable grip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this splicing fid?\u003c\/strong\u003e It measures 6-13\/16 inches in length, making it compact enough to store in a tool bag or dock box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog splicing fid weigh?\u003c\/strong\u003e The 562008-1 weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fid suitable for rope larger than 1\/2 inch?\u003c\/strong\u003e No, the 562008-1 is sized for 1\/8 inch to 1\/2 inch rope; Sea-Dog offers a larger splicing fid, part number 562016-1, for rope 1\/2 inch and up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a splicing fid used for?\u003c\/strong\u003e A splicing fid is used to separate and guide rope strands apart so they can be tucked and woven together to form a rope splice, such as for an eye splice or line repair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the handle make the fid comfortable to use for extended splicing work?\u003c\/strong\u003e Yes, the hardwood handle on the Sea-Dog 562008-1 is designed for ease of operation, giving a secure and comfortable grip during repeated splicing passes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the stainless steel tip rust in saltwater use?\u003c\/strong\u003e The Sea-Dog 562008-1's stainless steel construction is built to resist corrosion, making it suitable for marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with the Sea-Dog splicing fid?\u003c\/strong\u003e The product is a single splicing fid, part number 562008-1, with an integrated hardwood handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the tip precision-shaped or just a plain spike?\u003c\/strong\u003e The 562008-1 features a precision tip designed for better splices, neater braids, and improved rope performance compared to a plain spike.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988826566875,"sku":"S-D-562008-1","price":7.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5306.jpg?v=1784429802"},{"product_id":"sea-dog-562016-1-stainless-steel-splicing-fid-with-hardwood-handle-11-in-for-1-2-in-and-larger-rope","title":"Sea-Dog Stainless Steel Splicing Fid with Hardwood Handle, 11 Inch, for 1\/2 Inch and Up Line - 562016-1","description":"\u003cp\u003eThe Sea-Dog Splicing Fid (562016-1) is a time-tested rope-working tool built for expert splicing on line 1\/2 inch and up. Its stainless steel body resists corrosion in the marine environment, while the hardwood handle gives you a comfortable, secure grip during repeated use. The precision tip is shaped to part strands cleanly and guide them through the splice, helping you produce neater braids and better-performing splices with less fighting against the rope.\u003c\/p\u003e\u003cp\u003eThis is a rugged, durable tool meant to hold up to regular use on the dock or aboard, whether you are splicing dock lines, anchor rodes, or other heavier line. At 11 inches overall, it is sized for larger-diameter rope; Sea-Dog also offers a shorter companion fid (562008-1) sized for 1\/8 inch to 1\/2 inch line, so pick the one that matches the rope you are working.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 562016-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel with hardwood handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Line Size:\u003c\/strong\u003e 1\/2 inch and up\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 11 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514562027\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rope is the Sea-Dog 562016-1 splicing fid designed for?\u003c\/strong\u003e The Sea-Dog 562016-1 splicing fid is designed for line 1\/2 inch and up in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this splicing fid?\u003c\/strong\u003e The Sea-Dog 562016-1 measures 11 inches overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the splicing fid made of?\u003c\/strong\u003e It is constructed of stainless steel with a hardwood handle for grip and comfort during use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 562016-1 weigh?\u003c\/strong\u003e This splicing fid weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a splicing fid used for?\u003c\/strong\u003e A splicing fid is used to part and separate rope strands to guide them through a splice, and the Sea-Dog 562016-1 is built specifically for this task on heavier line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a smaller version for thinner rope?\u003c\/strong\u003e Yes, Sea-Dog also makes the 562008-1 splicing fid, sized for line from 1\/8 inch to 1\/2 inch, as a separate part for smaller-diameter rope.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fid work on smaller diameter line under 1\/2 inch?\u003c\/strong\u003e The 562016-1 is sized for 1\/2 inch and up line; for rope thinner than that, the Sea-Dog 562008-1 fid is the correct size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the handle make splicing easier?\u003c\/strong\u003e Yes, the hardwood handle on the 562016-1 is designed for ease of operation, giving a secure grip while working the fid through rope strands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fid durable enough for regular dock use?\u003c\/strong\u003e The stainless steel construction of the Sea-Dog 562016-1 is built to be rugged and durable for repeated splicing work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this splicing fid?\u003c\/strong\u003e The manufacturer part number is 562016-1, made by Sea-Dog.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fid come as a single tool or with accessories?\u003c\/strong\u003e The Sea-Dog 562016-1 is a single splicing fid tool with a stainless steel body and hardwood handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the precision tip on this fid do?\u003c\/strong\u003e The precision tip on the 562016-1 is shaped to help produce cleaner splices, neater braids, and improved rope performance.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988826599643,"sku":"S-D-562016-1","price":13.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5306_eaadf038-49fc-4396-b996-74790792236f.jpg?v=1784429803"},{"product_id":"taylor-made-products-1001-stainless-steel-fender-lock-peg-set-universal-boat-fender-mount-for-lines-up-to-1-2","title":"Taylor Made Products 1001 Stainless Steel Boat Fender Lock and Peg, Fits Fender Lines up to 1\/2 Inch","description":"\u003cp\u003eThe Taylor Made Products 1001 Stainless Steel Fender Lock and Peg is a simple, durable way to keep boat fenders securely positioned along the rail while docking, mooring, or rafting up. The set pairs a fixed mounting lock with a one-way locking adjustment peg, so once a fender line is set at the height you want, it stays there instead of sliding up and down the rail with every wave or wake. The lock and peg are made from stainless steel for corrosion resistance in saltwater and freshwater marine environments, with a polished silver finish that matches other stainless hardware on deck.\u003c\/p\u003e\u003cp\u003eThe peg accepts fender lines up to 1\/2 inch in diameter, covering the sizing used on most common boat fenders. Mounting screws are included, so the set installs directly onto a rail, hull, or mounting surface with basic hand tools. The one-way locking design means the peg can be adjusted to set the fender height, then locks in place to resist accidental loosening. This is a universal-fit accessory, intended to work with fender lines generally rather than a single boat make or model.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Line Diameter:\u003c\/strong\u003e Up to 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Screw-In\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Thickness:\u003c\/strong\u003e 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Fender Lock, Fender Peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size fender lines does the Taylor Made 1001 fit?\u003c\/strong\u003e The Taylor Made Products 1001 fender lock and peg accepts fender lines up to 1\/2 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with part number 1001?\u003c\/strong\u003e The set includes a fender lock and a fender peg, along with mounting screws for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1001 fender lock adjustable?\u003c\/strong\u003e Yes, it uses a one-way locking adjustment peg, so the fender line height can be set and it locks in place to resist slipping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 1001 fender lock made from?\u003c\/strong\u003e It is made from stainless steel with a polished silver finish, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fender lock fit a specific boat make or model?\u003c\/strong\u003e No, the Taylor Made 1001 is a universal-fit accessory designed to work with standard fender lines rather than a specific boat make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 1001 fender lock installed?\u003c\/strong\u003e It is a screw-in installation, using the mounting screws included with the fender lock and peg set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made 1001 fender lock weigh?\u003c\/strong\u003e The complete fender lock and peg set weighs 0.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the peg be removed or is it a fixed mount?\u003c\/strong\u003e The 1001 set combines a mounted lock with a locking peg for the fender line; the peg locks in one direction once the desired height is set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does the 1001 fender lock come in?\u003c\/strong\u003e It has a polished silver finish, matching typical stainless steel marine hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use a fender lock and peg instead of just tying off a fender line?\u003c\/strong\u003e A locking peg like the Taylor Made 1001 holds the fender line at a set height so it does not slide along the rail during docking, mooring, or rafting, which a simple tied-off line can allow.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989521969371,"sku":"NAT-1001","price":42.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__22901.1763741553.500.750.jpg?v=1785188698"},{"product_id":"taylor-made-1005-hand-pump-with-hose-adapter-for-inflating-boat-fenders-buoys-water-toys-abs-plastic-made-in-usa","title":"Taylor Made Hand Pump with Hose Adapter, ABS Plastic, for Boat Fenders and Water Toys","description":"\u003cp\u003eThe Taylor Made hand pump with hose adapter (part number 1005) is a compact, handheld inflator built for boaters who need a quick way to top off air pressure in fenders, buoys, and water toys. Measuring just 8 inches long and 1.5 inches in diameter, it is small enough to stow in a helm compartment, tackle box, or storage locker without taking up meaningful space. The pump is molded from ABS plastic for durability in a marine environment, and it is rated to a maximum pressure of 150 pounds per square inch.\u003c\/p\u003e\u003cp\u003eA key feature of this pump is its integrated hose adapter, which lets you reach valves that are recessed or otherwise hard to access, a common problem when inflating boat fenders and buoys with tight or angled inflation ports. Operation is fully manual and handheld, so no battery, compressor, or power source is required, making it a reliable backup even when other inflation equipment is unavailable. Each order includes one hand pump with hose adapter, and the unit is manufactured in the USA.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1005\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Boat Fenders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e ABS Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 8 inches L x 1.5 inches W x 1.5 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pressure:\u003c\/strong\u003e 150 pounds per square inch (PSI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual, handheld\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Hand Pump, Hose Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011321053\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made 1005 hand pump used for?\u003c\/strong\u003e It is a manual hand pump used to inflate boat fenders, buoys, and water toys, and to add quick air pressure adjustments to those items while on board.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pump come with a hose adapter?\u003c\/strong\u003e Yes, the Taylor Made 1005 includes an attached hose adapter that lets you reach valves that are recessed or otherwise hard to access on fenders and buoys.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of part number 1005?\u003c\/strong\u003e The Taylor Made hand pump measures 8 inches long by 1.5 inches wide by 1.5 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the pump made of?\u003c\/strong\u003e The Taylor Made 1005 hand pump is constructed of ABS plastic, chosen for durability in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum pressure rating of this pump?\u003c\/strong\u003e The Taylor Made hand pump is rated to a maximum pressure of 150 pounds per square inch (PSI).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1005 a manual or powered pump?\u003c\/strong\u003e It is a manual, handheld pump that requires no battery or compressor to operate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Taylor Made hand pump?\u003c\/strong\u003e The pump is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made 1005 hand pump weigh?\u003c\/strong\u003e It weighs 0.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part number 1005?\u003c\/strong\u003e Each order includes one Taylor Made hand pump with hose adapter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1005 hand pump made in the USA?\u003c\/strong\u003e Yes, the Taylor Made hand pump with hose adapter is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this pump inflate items with hard-to-reach valves?\u003c\/strong\u003e Yes, the hose adapter on the Taylor Made 1005 is specifically designed to reach valves that are difficult to access directly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this pump work on buoys and water toys, or only fenders?\u003c\/strong\u003e The Taylor Made 1005 hand pump is used for fenders, buoys, and water toys, not just boat fenders.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989663461595,"sku":"NAT-1005","price":16.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-2__33079.1763741545.500.750.jpg?v=1785189030"},{"product_id":"taylor-made-hull-gard-inflatable-boat-fender-white-6-1-2-x-23-mpn-1023-for-boats-20-to-25","title":"Taylor Made Products Hull Gard Inflatable Vinyl Boat Fender, White, 6-1\/2 Inch x 23 Inch, for Boats 20 to 25 Feet","description":"\u003cp\u003eThe Taylor Made Products Hull Gard fender (part number 1023) is an inflatable, cylindrical boat fender built to keep hull sides protected from dock rash and rub against pilings. It measures 6-1\/2 inches in diameter by 23 inches in length, sized for boats from 20 to 25 feet long. The fender uses a unique oval shape rather than a perfectly round cross-section, which helps it resist rolling out of position so it stays where you hang it along the rail.\u003c\/p\u003e\u003cp\u003eConstruction is tough marine-grade vinyl finished with True Color technology for a deep, consistent white that resists fading from sun and saltwater exposure. A 5\/8 inch double eyelet configuration lets you hang the fender vertically or horizontally, so it adapts to different rail heights and docking setups. Each fender arrives custom inflated to the correct pressure, so it is ready to hang and use straight out of the box without a separate pump or gauge. The Hull Gard 1023 is made in the USA and backed by a lifetime guarantee against splitting or bursting, giving boat owners long-term confidence in everyday fendering duty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1023\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Cylindrical (Hull Gard) inflatable boat fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter x Length:\u003c\/strong\u003e 6-1\/2 inches x 23 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Size:\u003c\/strong\u003e 20 feet to 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEyelet Configuration:\u003c\/strong\u003e 5\/8 inch double eyelet, vertical or horizontal hanging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 1 Hull-Gard fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime guarantee against splitting or bursting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Taylor Made 1023 Hull Gard fender designed for?\u003c\/strong\u003e This fender is sized for boats 20 to 25 feet long, with a body measuring 6-1\/2 inches in diameter by 23 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Hull Gard fender arrive ready to use?\u003c\/strong\u003e Yes, the Hull Gard 1023 is custom inflated to the correct pressure at the factory and ships inflated, so no pump or gauge is needed before hanging it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the Hull Gard fender shaped the way it is instead of perfectly round?\u003c\/strong\u003e The Hull Gard 1023 uses a unique oval shape specifically to prevent the fender from rolling out of position, keeping it in place against the hull for consistent protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Taylor Made 1023 fender made from?\u003c\/strong\u003e It is made from tough marine-grade vinyl, finished with Taylor Made's True Color technology for a deep, long-lasting white color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender be hung both vertically and horizontally?\u003c\/strong\u003e Yes, the 1023 fender has a 5\/8 inch double eyelet configuration that supports either vertical or horizontal hanging depending on your rail setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Hull Gard 1023 fender weigh?\u003c\/strong\u003e The Taylor Made Hull Gard fender, part number 1023, weighs 2.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made Hull Gard fender made in the USA?\u003c\/strong\u003e Yes, the Hull Gard 1023 is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Hull Gard 1023 fender?\u003c\/strong\u003e It is backed by a lifetime guarantee against splitting or bursting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options does part number 1023 come in?\u003c\/strong\u003e This specific listing, part number 1023, is white; Taylor Made offers the Hull Gard fender line in other colors under different part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the Hull Gard 1023?\u003c\/strong\u003e Each order includes one Hull-Gard fender, custom inflated and ready to hang.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989663527131,"sku":"NAT-1023","price":32.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41Gy4Bc2t6S_ef70361f-c834-43ed-bd83-610f2156af49.jpg?v=1784486389"},{"product_id":"taylor-made-products-1006-boat-line-hanger-durable-white-pvc-rail-mount-for-lines-power-cords-9-1-2-long","title":"Taylor Made Products 1006 Boat Line Hanger, White PVC, 9-1\/2 Inches","description":"\u003cp\u003eThe Taylor Made Products 1006 Boat Line Hanger is a snap-on organizer that keeps loose dock lines, mooring ropes, and power cords secured and off the deck. Its durable PVC mounting band snaps directly over a rail, lifeline, or stanchion, so no drilling or hardware installation is required. Once mounted, the bottom section of the hanger snaps around a coiled line or cord to hold it in place, keeping the boat deck clear of tripping hazards and tangled rope.\u003c\/p\u003e\u003cp\u003eMade from flexible, durable polyvinyl chloride designed to hold up in the marine environment, the 1006 measures 9-1\/2 inches in length and is finished in white to blend with most boat trim. It is a simple, reusable solution for keeping coiled lines, extension cords, and hoses organized and readily accessible whenever they are needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1006\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Boat Line Hanger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 9-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 8.63 inches L x 3 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyvinyl Chloride (PVC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Snap-on PVC mounting band\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011321060\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Products 1006 used for?\u003c\/strong\u003e The Taylor Made Products 1006 is a line hanger that keeps loose boat lines, mooring ropes, and power cords neatly secured and off the deck instead of lying underfoot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 1006 line hanger mount?\u003c\/strong\u003e It mounts without tools or hardware: the durable PVC mounting band simply snaps over a rail, lifeline, or stanchion, and the bottom section snaps around a coiled line or cord to hold it in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Taylor Made 1006 line hanger?\u003c\/strong\u003e It measures 9-1\/2 inches in length, with overall item dimensions of 8.63 inches long by 3 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the line hanger made from?\u003c\/strong\u003e The 1006 is made from polyvinyl chloride (PVC), a flexible plastic chosen for its durability in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 1006 line hanger come in?\u003c\/strong\u003e The Taylor Made 1006 is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this line hanger be used for power cords as well as rope?\u003c\/strong\u003e Yes, the 1006 is designed to hold both coiled lines and power cords, keeping either one secured and out of the way on the boat deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Taylor Made 1006 require drilling to install?\u003c\/strong\u003e No drilling is needed. The PVC mounting band snaps directly over an existing rail, lifeline, or stanchion for a tool-free installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1006 line hanger weigh?\u003c\/strong\u003e The Taylor Made Products 1006 weighs 0.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 1006?\u003c\/strong\u003e Each order includes one Taylor Made Products 1006 line hanger, ready to snap onto a rail, lifeline, or stanchion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1006 line hanger reusable?\u003c\/strong\u003e Yes, the snap-on PVC band and clip design allow the 1006 to be attached and released repeatedly for storing different lines or cords as needed.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989663625435,"sku":"NAT-1006","price":12.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__19042.1756473457.500.750.jpg?v=1785188623"},{"product_id":"taylor-made-hull-gard-inflatable-boat-fender-10-1-2-x-30-mpn-1024-fits-boats-35-to-50-ft","title":"Taylor Made Products Hull Gard Vinyl Boat Fender, 10-1\/2 x 30 Inch, Fits Boats 35 to 50 Feet, Part 1024","description":"\u003cp\u003eThe Taylor Made Products Hull Gard fender, part number 1024, is a cylindrical inflatable vinyl fender sized 10-1\/2 inches by 30 inches, sized for boats in the 35 foot to 50 foot range. Taylor Made recommends running 2 fenders of this size per boat in that length range for proper hull protection along the dock or at a slip.\u003c\/p\u003e\u003cp\u003eBuilt from vinyl for softness combined with puncture and abrasion resistance, the Hull Gard fender cushions the hull against pilings, dock edges, and other vessels. It inflates through a rubber football-style needle valve, letting you adjust firmness to match conditions and the level of protection needed. Each fender is backed by a lifetime guarantee against splitting or bursting, and it is made in the U.S.A.\u003c\/p\u003e\u003cp\u003eBecause fender sizing is matched to boat length, choosing the correct size and running enough fenders is important to keep the hull protected; the 10-1\/2 x 30 inch size (part 1024) is Taylor Made's recommendation for the 35 to 50 foot boat range, with larger sizes such as the 12 x 34 inch fender recommended for boats from 50 to 60 feet.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1024\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Cylindrical Boat Fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Size:\u003c\/strong\u003e 10-1\/2 inches x 30 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 35 feet to 50 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Quantity:\u003c\/strong\u003e 2 fenders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.19 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011310248\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation Valve:\u003c\/strong\u003e Rubber needle valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime guarantee against splitting or bursting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Taylor Made 1024 fender designed for?\u003c\/strong\u003e Part number 1024 is sized for boats from 35 feet to 50 feet, per Taylor Made's fender size chart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of fender 1024?\u003c\/strong\u003e This fender measures 10-1\/2 inches by 30 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many of these fenders do I need?\u003c\/strong\u003e Taylor Made recommends 2 fenders of the 10-1\/2 x 30 inch size (part 1024) for boats in the 35 to 50 foot range as a minimum for proper hull protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Hull Gard fender made from?\u003c\/strong\u003e The Hull Gard fender, including part 1024, is made from vinyl for a combination of softness and puncture\/abrasion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you inflate the fender?\u003c\/strong\u003e Inflation is through a rubber football-style needle valve, which lets you adjust the firmness of the fender to the level of protection needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on the Taylor Made Hull Gard fender?\u003c\/strong\u003e Yes, the Hull Gard fender carries a lifetime guarantee against splitting or bursting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Taylor Made Hull Gard fender manufactured?\u003c\/strong\u003e It is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape is part number 1024?\u003c\/strong\u003e It is a cylindrical fender, 10-1\/2 inches in diameter by 30 inches long, rather than a round or oval fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for part 1024?\u003c\/strong\u003e The UPC for the 10-1\/2 x 30 inch Hull Gard fender, part 1024, is 040011310248.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fender should I use for a bigger boat, up to 60 feet?\u003c\/strong\u003e For boats from 50 to 60 feet, Taylor Made's chart recommends a larger 12 x 34 inch fender instead of the 10-1\/2 x 30 inch part 1024.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1024 fender weigh?\u003c\/strong\u003e The 10-1\/2 x 30 inch Hull Gard fender, part 1024, weighs 5.19 pounds.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989663690971,"sku":"NAT-1024","price":200.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41Gy4Bc2t6S_f4692cf1-fc01-410c-80f6-8c4e8d1bd8bb.jpg?v=1784486395"},{"product_id":"taylor-made-1009-extra-locking-peg-for-boat-fender-lock-1010-reinforced-nylon","title":"Taylor Made Extra Locking Peg #1009 for Boat Fender Lock #1010, Nylon","description":"\u003cp\u003eThe Taylor Made #1009 is an extra locking peg for the Taylor Made Fender Lock Set #1010, sold individually so boaters can add a second adjustment point or replace a lost or worn peg without buying a whole new lock set. It is built from injection-molded reinforced nylon for long-term durability in a marine environment, and its internal teeth grip firmly onto the fender line so the fender stays securely positioned at the height you set it. The housing is vented, which keeps water from accumulating and pooling inside the fender tube, protecting the peg and extending its service life. This peg accepts rope or line up to 3\/4 inch in diameter and is designed for use with fenders that have 1\/2 inch diameter tubing, matching the sizing of the companion #1010 Fender Lock Set. It is finished in white to blend in with Taylor Made fenders and most boat fender lines. Each order includes one locking peg only; it does not include the lock body. This is a simple, purpose-built accessory for boaters who want a spare or replacement peg on hand, or who are outfitting a second fender line and need an additional adjustment peg to match their existing #1010 lock.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1009\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon (injection-molded reinforced nylon)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Length:\u003c\/strong\u003e 4.88 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Width:\u003c\/strong\u003e 1.94 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.02 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope\/Line Compatibility:\u003c\/strong\u003e Accepts line up to 3\/4 inch in diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Tubing Compatibility:\u003c\/strong\u003e For fenders with 1\/2 inch diameter tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Taylor Made Fender Lock Set #1010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Design:\u003c\/strong\u003e Yes, vented to prevent water accumulation in the fender tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1 locking peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011321091\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made #1009 used for?\u003c\/strong\u003e The #1009 is a single replacement or additional locking peg for the Taylor Made Fender Lock Set #1010; it lets you adjust a boat fender's height on the line and re-secure it in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the #1009 come with a lock body?\u003c\/strong\u003e No. The #1009 is the peg only, not the full lock assembly. The complete lock-and-peg unit is sold as the Taylor Made Fender Lock Set #1010.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rope or line diameter does this peg accept?\u003c\/strong\u003e The Taylor Made #1009 locking peg accepts line up to 3\/4 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fender tubing size is the #1009 peg designed for?\u003c\/strong\u003e This peg is designed for fenders with 1\/2 inch diameter tubing, matching the sizing of the Taylor Made #1010 Fender Lock Set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the locking peg made from?\u003c\/strong\u003e It is made from injection-molded reinforced nylon, chosen for durability in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the peg keep the fender in place?\u003c\/strong\u003e Internal teeth on the #1009 peg grip the rope firmly, which locks the fender at the height it has been set to on the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the peg vented?\u003c\/strong\u003e The Taylor Made #1009 peg is vented so water does not accumulate inside the fender tube, which helps prevent damage and extends the part's usable life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the #1009 locking peg?\u003c\/strong\u003e The peg is white, matching the color of most Taylor Made fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pegs are included in an order?\u003c\/strong\u003e Each order of part number 1009 includes one locking peg.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the #1009 peg?\u003c\/strong\u003e The Taylor Made #1009 measures 4.88 inches in length by 1.94 inches in width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the #1009 an OEM Taylor Made part?\u003c\/strong\u003e Yes, 1009 is the genuine Taylor Made manufacturer part number for this locking peg.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the #1009 be used with a fender lock other than the #1010?\u003c\/strong\u003e The #1009 peg is designed to match the Taylor Made Fender Lock Set #1010; no other lock compatibility is specified for this part.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989663723739,"sku":"NAT-1009","price":3.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__35826.1757600006.500.750.jpg?v=1785188111"},{"product_id":"taylor-made-products-1021-hull-gard-inflatable-vinyl-boat-fender-4-5-x-16-white-boats-10-15-ft","title":"Taylor Made Products 1021 Hull Gard Inflatable Vinyl Boat Fender, 4-1\/2 x 16 Inch, White, Fits Boats 10 to 15 Feet","description":"\u003cp\u003eThe Taylor Made Products 1021 Hull Gard is an inflatable vinyl boat fender measuring 4-1\/2 inches in diameter by 16 inches long, sized for boats 10 feet to 15 feet. It ships custom inflated and ready to hang, with a rubber football needle valve on all sizes so owners can adjust firmness to suit their application; recommended inflation is 2 psi. The fender uses an oval design rather than a round cross-section, which helps keep it from rolling out of position along the hull and reduces hull rub compared to a fender that can roll. Reinforced molded-in construction is built to withstand the constant pull of everyday docking and fendering use. The 1021 is finished in white and is covered by a lifetime guarantee against splitting or bursting. It is made in the U.S.A. Boaters selecting a fender size are advised to survey their docking area to see what fender size and quantity other boats of similar size and weight are using, and use that as a guideline for their own setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1021\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Cylindrical boat fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Size:\u003c\/strong\u003e 10 feet to 15 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Oval, anti-roll design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Rubber football needle valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Inflation:\u003c\/strong\u003e 2 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011310217\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime guarantee against splitting or bursting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Taylor Made 1021 Hull Gard fender designed for?\u003c\/strong\u003e The Taylor Made Products 1021 is recommended for boats 10 feet to 15 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 1021 fender?\u003c\/strong\u003e The 1021 measures 4-1\/2 inches in diameter by 16 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1021 fender weigh?\u003c\/strong\u003e The Taylor Made 1021 weighs 1.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 1021 Hull Gard fender?\u003c\/strong\u003e This part number, 1021, is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Hull Gard fender made from?\u003c\/strong\u003e It is made from vinyl with reinforced molded-in construction designed to withstand the constant pull of everyday fendering use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1021 fender come inflated?\u003c\/strong\u003e Yes, the Taylor Made 1021 ships custom inflated and ready to hang.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat inflation pressure should I use for the 1021 fender?\u003c\/strong\u003e Recommended inflation for the 1021 is 2 psi, adjustable through its rubber football needle valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the 1021 fender oval instead of round?\u003c\/strong\u003e The oval shape of the 1021 is designed to prevent the fender from rolling out of position and to reduce hull rub compared to a fender that rolls freely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of valve does the 1021 fender use?\u003c\/strong\u003e The 1021 uses a rubber football needle valve for easy inflation, allowing the firmness to be adjusted for different applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1021 fender covered by a warranty?\u003c\/strong\u003e Yes, the Taylor Made 1021 carries a lifetime guarantee against splitting or bursting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Taylor Made 1021 fender made?\u003c\/strong\u003e The 1021 Hull Gard fender is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I pick the right fender size, and is the 1021 the right one for my boat?\u003c\/strong\u003e Taylor Made recommends surveying your docking area to see what fender size and quantity similarly sized boats are using as a guideline; the 1021 covers the 10 foot to 15 foot boat range at 4-1\/2 inches by 16 inches.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989663756507,"sku":"NAT-1021","price":16.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61gHvGvNCuL.jpg?v=1784486398"},{"product_id":"taylor-made-products-1015-tidy-ups-boat-fender-adjuster-white-standard-rail-size","title":"Taylor Made Products Tidy-Ups Fender Adjuster, White Vinyl, Standard Rail Size (Part No. 1015)","description":"\u003cp\u003eThe Taylor Made Products Tidy-Ups Fender Adjuster (part number 1015) is a white vinyl fender adjuster built for standard rail size boats. It lets you raise or lower a fender line quickly to match changing dock heights, so your boat stays protected against pilings and dock edges without constantly retying lines by hand.\u003c\/p\u003e\u003cp\u003eThe adjuster is built around a PVC mounting strap that snaps directly over your boat's railing or cleats and holds lines up to 5\/8 inch in diameter. It ships with a 6 foot 3\/8 inch polypropylene rope that has a pre-spliced end, which prevents fraying and kinking and makes threading the fender line fast and clean. The white color is designed to match Taylor Made's color-coordinated fender line, so the finished look stays consistent with the rest of your fender setup. The adjuster is made in the USA to Taylor Made's standard construction quality.\u003c\/p\u003e\u003cp\u003eThis is the standard rail size version of the Tidy-Ups adjuster, intended for typical boat railings rather than the larger rail size covered by a different Taylor Made part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1015\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Size:\u003c\/strong\u003e Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Material:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Length:\u003c\/strong\u003e 6 feet 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Line Diameter:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011285324\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat rail size does the Taylor Made 1015 fender adjuster fit?\u003c\/strong\u003e The Taylor Made Tidy-Ups fender adjuster, part number 1015, is designed for standard rail size boats rather than the larger rail size covered by a different Taylor Made part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the fender adjuster attach to the boat?\u003c\/strong\u003e A PVC mounting strap on part number 1015 snaps directly over the boat's railing or cleats, giving a secure hold without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fender line can I use with this adjuster?\u003c\/strong\u003e The mounting strap on the 1015 fender adjuster holds lines up to 5\/8 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Taylor Made 1015 come with a rope included?\u003c\/strong\u003e Yes, it ships with a 6 foot 3\/8 inch polypropylene rope that has a pre-spliced end to prevent kinking during threading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 1015?\u003c\/strong\u003e Part number 1015 is white vinyl, matched to Taylor Made's color-coordinated fender line system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fender adjuster made in the USA?\u003c\/strong\u003e Yes, the Taylor Made Tidy-Ups fender adjuster is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made 1015 fender adjuster weigh?\u003c\/strong\u003e It weighs 0.28 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a fender adjuster used for?\u003c\/strong\u003e A fender adjuster like the Taylor Made 1015 lets a boater quickly raise or lower a fender's hanging position to match different dock heights, protecting the hull without retying the line each time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need tools to install the 1015 fender adjuster?\u003c\/strong\u003e No, the PVC mounting strap simply snaps over the boat's railing or cleats, so no tools are required for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the rope pre-spliced or do I need to finish the end myself?\u003c\/strong\u003e The included 6 foot 3\/8 inch polypropylene rope has a pre-spliced end already finished to prevent kinks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Taylor Made 1015 fender adjuster?\u003c\/strong\u003e The UPC for this white vinyl, standard rail size fender adjuster is 040011285324.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989663822043,"sku":"NAT-1015","price":18.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71P_jiXh1ML.jpg?v=1784486401"},{"product_id":"taylor-made-1010-stainless-steel-boat-fender-lock-and-peg-set-traditional-hanging-fender-mount-accepts-rope-up-to-1-4-in-screws-included","title":"Taylor Made Products Stainless Steel Fender Lock and Peg Set, Accepts Rope up to 1\/4 Inch, Part 1010","description":"\u003cp\u003eThe Taylor Made Products Fender Lock and Peg Set (Part Number 1010) is a stainless steel hardware set used to hang boat fenders from the rail or stanchion using a length of rope line. The set consists of a fender lock and a fender peg, and is built from stainless steel for lasting resistance to harsh marine conditions. It accepts rope line up to 1\/4 inch in diameter, and the lock uses a pull-style pin for quick attachment and release when adjusting fender height or removing fenders for storage.\u003c\/p\u003e\u003cp\u003eThe lock and peg measure 4.88 inches by 1.94 inches by 0.75 inches overall, with a polished silver finish, and the peg thread size is 1\/4-20. Mounting screws with a round head style are included, so the set can be installed directly without sourcing separate hardware. This set is designed as a direct replacement for existing fender lock and peg hardware that has worn out or corroded, making it a straightforward swap on boats that already use this style of fender hanging system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Fender Lock and Peg Set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 4.88 inches x 1.94 inches x 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Diameter Capacity:\u003c\/strong\u003e Up to 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/4-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Type:\u003c\/strong\u003e Pull\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Head Style:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Fender Lock, Fender Peg, Mounting Screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011321107\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made Fender Lock and Peg Set (Part 1010) used for?\u003c\/strong\u003e It is used to hang a boat fender from a rail or stanchion using a length of rope line, letting the fender height be adjusted or the fender removed quickly with the pull-style pin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rope diameter does part number 1010 accept?\u003c\/strong\u003e The fender lock accepts rope line up to 1\/4 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the fender lock and peg made from?\u003c\/strong\u003e Stainless steel, chosen for its resistance to corrosion in marine conditions, with a polished silver finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Taylor Made fender lock and peg set?\u003c\/strong\u003e The set measures 4.88 inches by 1.94 inches by 0.75 inches overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fender lock set include mounting hardware?\u003c\/strong\u003e Yes, mounting screws with a round head style are included with the Taylor Made Fender Lock and Peg Set, Part 1010.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with part number 1010?\u003c\/strong\u003e The set includes one fender lock, one fender peg, and mounting screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does the fender peg use?\u003c\/strong\u003e The peg uses a 1\/4-20 thread size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the pin on the fender lock work?\u003c\/strong\u003e The Taylor Made fender lock uses a pull-type pin, allowing the rope line to be locked in place or released by pulling the pin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan part 1010 be used to replace an old or corroded fender lock?\u003c\/strong\u003e Yes, this stainless steel set is designed as a direct replacement for worn fender lock and peg hardware of this style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Taylor Made Fender Lock and Peg Set weigh?\u003c\/strong\u003e It weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does part number 1010 come in?\u003c\/strong\u003e It has a silver, polished finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the UPC for the Taylor Made Fender Lock and Peg Set 1010 listed anywhere?\u003c\/strong\u003e Yes, the UPC for this set is 040011321107.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989663854811,"sku":"NAT-1010","price":10.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__12322.1763741540.500.750.jpg?v=1785188789"},{"product_id":"taylor-made-products-1016-tidy-ups-fender-adjuster-standard-rail-size-black-vinyl-snaps-over-lifelines-and-railings","title":"Taylor Made Products Tidy-Ups Fender Adjuster 1016, Black Vinyl, Standard Rail Size, Sold in Pairs","description":"\u003cp\u003eThe Taylor Made Products Tidy-Ups Fender Adjuster, part number 1016, is a black vinyl fender adjuster built for boaters who need a quick, adjustable way to hang fenders from a rail or stanchion system. Its movable J-hooks mount directly onto 1 inch rails and stanchion systems, letting you slide the adjuster along the rail to set the fender at the height you need, then lock it in place. The adjuster holds line up to 5\/8 inch in diameter, making it compatible with standard fender lines and pendants used on most recreational boats.\u003c\/p\u003e\u003cp\u003eThis is the Standard Rail Size version, finished in black vinyl. Taylor Made also offers a White Vinyl Large Rail Size version under a separate part number for boats with larger rail diameters. The 1016 adjuster measures 9.5 inches long by 3.25 inches wide by 1.75 inches high and weighs 0.28 pounds. It is sold in pairs, so one order equips both sides of a typical fender setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1016\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Size:\u003c\/strong\u003e Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Movable J-hooks, mounts on 1 inch rails and stanchion systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Capacity:\u003c\/strong\u003e Holds line up to 5\/8 inch in diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 9.5 inches L x 3.25 inches W x 1.75 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Sold in pairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts on 1 inch rails and stanchion systems\u003c\/li\u003e\n\u003cli\u003eStandard Rail Size (a White Vinyl Large Rail Size version, part number 1018, is available separately for larger rails)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat rail size does the Taylor Made 1016 fender adjuster fit?\u003c\/strong\u003e Part number 1016 is the Standard Rail Size version, with movable J-hooks that mount on 1 inch rails and stanchion systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much line can this fender adjuster hold?\u003c\/strong\u003e The Tidy-Ups fender adjuster 1016 holds line up to 5\/8 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1016 sold as a single unit or a pair?\u003c\/strong\u003e It is sold in pairs, so one order provides adjusters for both sides of a typical fender setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 1016?\u003c\/strong\u003e Part number 1016 is finished in black vinyl.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a version for larger rails?\u003c\/strong\u003e Yes, Taylor Made Products offers a White Vinyl Large Rail Size version under a separate part number, 1018, for boats with larger diameter rails.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 1016 fender adjuster?\u003c\/strong\u003e It measures 9.5 inches long by 3.25 inches wide by 1.75 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1016 fender adjuster weigh?\u003c\/strong\u003e Each Tidy-Ups fender adjuster 1016 weighs 0.28 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this adjuster be used on a stanchion instead of a rail?\u003c\/strong\u003e Yes, the movable J-hooks on the 1016 mount on both 1 inch rails and stanchion systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Tidy-Ups fender adjuster made from?\u003c\/strong\u003e The 1016 fender adjuster is made from black vinyl.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need tools to install the 1016 fender adjuster?\u003c\/strong\u003e The J-hooks on part number 1016 are movable and mount onto the rail or stanchion, allowing tool-free positioning along the rail.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989664018651,"sku":"NAT-1016","price":25.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61gqucUpFWL.jpg?v=1784486411"},{"product_id":"taylor-made-1067-pwc-fender-for-personal-watercraft-hook-under-quick-attach-yellow-9-x-9-x-3-5-in","title":"Taylor Made PWC Fender, Yellow, Hook-Under Quick Attachment, 9 x 9 x 3.5 Inches","description":"\u003cp\u003eThis Taylor Made PWC fender is built to protect the sides of a personal watercraft during slow-speed docking and storage. Made from marine-grade vinyl designed to withstand salt water and UV exposure, the fender is shaped to hook under the bond flange of most personal watercraft for quick, tool-free attachment. Flex areas built into the fender body act as a hinge, allowing it to conform to the contours of the hull rather than sitting rigid against it.\u003c\/p\u003e\u003cp\u003eBecause personal watercraft hulls vary by make, model, and year, this fender is not a custom fit and is designed to work with most PWC profiles where the underside of the bond flange is open enough to accept the hook. Fit will vary depending on the specific watercraft. The fender includes a rubber needle-valve for inflation and air pressure adjustment with a standard air pump, along with a suction cup and a securing line for additional attachment options. It is intended for slow-speed docking use only and is not rated for use at full speed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1067\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 9 x 9 x 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment Style:\u003c\/strong\u003e Hook-under quick attachment (bond flange)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation:\u003c\/strong\u003e Rubber needle-valve, standard air pump compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Accessories:\u003c\/strong\u003e Suction cup, securing line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Slow-speed docking only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill the Taylor Made 1067 PWC fender fit my personal watercraft exactly?\u003c\/strong\u003e It is designed to fit the profiles of most personal watercraft where the underside of the bond flange is open enough to allow the fender to hook underneath, but it is not a custom fit and how well it fits will vary by the specific make, model, and year of the watercraft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the fender attach to a personal watercraft?\u003c\/strong\u003e The bottom of the Taylor Made 1067 fender is shaped to hook under the bond flange for quick attachment, and it also comes with a suction cup and a securing line for additional hold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this PWC fender made from?\u003c\/strong\u003e It is made from marine-grade vinyl engineered to hold up to salt water and UV exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this fender come in?\u003c\/strong\u003e This part number, 1067, is the yellow version of the Taylor Made PWC fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this fender?\u003c\/strong\u003e The Taylor Made 1067 measures 9 x 9 x 3.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fender weigh?\u003c\/strong\u003e It weighs 1.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this fender while riding at full speed?\u003c\/strong\u003e No, the Taylor Made 1067 is recommended for slow-speed docking only and is not intended for use at full speed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I inflate the fender and adjust the air pressure?\u003c\/strong\u003e It includes a rubber needle-valve that lets you inflate it and adjust air pressure with a standard air pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this fender?\u003c\/strong\u003e The Taylor Made 1067 comes with the fender itself, a suction cup, and a securing line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the fender flex in certain areas?\u003c\/strong\u003e Built-in flex areas create a hinge-like action that lets the fender conform to the shape of the watercraft hull for a closer fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fender a universal fit for all PWC models?\u003c\/strong\u003e No, it is designed to work with most PWC profiles that have an open bond flange underside, but Taylor Made states it is not a custom fit and fit quality depends on the specific watercraft.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989664280795,"sku":"NAT-1067","price":42.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71K0kGPSHWL.jpg?v=1784486434"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/81HtKWn5U6L.jpg?v=1785357511","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-docking-fendering.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}