{"title":"Battery Switches \u0026 Selectors","description":null,"products":[{"product_id":"sierra-mp38910-marine-battery-disconnect-switch-lever-operated-175a-continuous-800a-intermittent-3-8in-brass-terminals","title":"Sierra MP38910 Lever Operated Battery Disconnect Switch, 175A Continuous \/ 800A Intermittent","description":"\u003cp\u003eThe Sierra MP38910 is a lever operated battery disconnect switch built to isolate a boat's battery from its electrical system when the vessel is not in use, helping prevent parasitic drain and reduce fire risk during storage or transport. The switch is rated for 175 amps continuous and 800 amps intermittent, making it suitable for cutting power to marine electrical circuits that see high startup or surge loads. Current flows through 3\/8 inch brass terminals, chosen for their conductivity and corrosion resistance in a marine environment. The lever itself is chrome plated brass, giving it a durable, corrosion resistant finish that stands up to salt air and routine handling. A faceplate is included, allowing for a finished, panel-mounted installation. Operation is simple: the lever moves between on and off positions, giving boat owners a fast, manual way to fully disconnect the battery without pulling cable terminals. This switch is a straightforward replacement or upgrade for existing lever operated disconnect switches on boats, and its compact footprint suits helm panels, battery compartments, and other mounting locations where a manual disconnect is needed. Weighing 1.07 pounds, it is a rugged, panel-mount component intended for direct-current marine electrical systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP38910\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Lever Operated Battery Disconnect Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Current Rating:\u003c\/strong\u003e 175 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Current Rating:\u003c\/strong\u003e 800 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Size:\u003c\/strong\u003e 3\/8 inch brass terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLever Material\/Finish:\u003c\/strong\u003e Chrome plated brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Faceplate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.07 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of the Sierra MP38910 battery disconnect switch?\u003c\/strong\u003e The MP38910 is rated for 175 amps continuous and 800 amps intermittent, so it can handle both steady loads and short high-current surges on a marine 12-volt circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP38910 a manual or automatic disconnect switch?\u003c\/strong\u003e It is a manual, lever operated switch. You move the chrome plated brass lever by hand to open or close the connection between the battery and the boat's electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra MP38910 come with a faceplate?\u003c\/strong\u003e Yes, a faceplate is included with the MP38910, allowing for a clean, finished panel-mount installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size terminals does this switch use?\u003c\/strong\u003e The MP38910 uses 3\/8 inch brass terminals for its battery and load connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the lever made from?\u003c\/strong\u003e Chrome plated brass. The plating resists corrosion in the salt-air and humid conditions common in marine electrical compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra MP38910 weigh?\u003c\/strong\u003e The MP38910 battery disconnect switch weighs 1.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the MP38910 switch?\u003c\/strong\u003e The MP38910 measures approximately 0.39 x 0.39 x 0.39 inches for the core switch body, before the faceplate and lever.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the MP38910 be used to prevent battery drain during storage?\u003c\/strong\u003e Yes, flipping the lever to the off position on the Sierra MP38910 fully isolates the battery from the boat's wiring, which helps prevent parasitic drain when the boat is stored.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra MP38910 suitable for high-amperage marine circuits?\u003c\/strong\u003e With a 175 amp continuous and 800 amp intermittent rating, the MP38910 is built for higher-current marine DC circuits, not just small accessory loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP38910 require any special tools to install?\u003c\/strong\u003e The MP38910 mounts with its included faceplate and connects via 3\/8 inch brass terminals, so installation uses standard marine electrical hand tools for terminating and securing the cables.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988454682843,"sku":"SIE-MP38910","price":77.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sie-mp38910_lg__92395.1558133331.500.750.jpg?v=1785187979"},{"product_id":"sea-dog-420600-1-heavy-duty-on-off-battery-switch-with-removable-key-cap-12-24v-dc-500a-momentary","title":"Sea-Dog Heavy Duty Battery Switch 420600-1, On\/Off with Removable Key, 12-24V 75A Continuous","description":"\u003cp\u003eThe Sea-Dog Heavy Duty Battery Switch (420600-1) is an On\/Off battery disconnect switch built from injection molded nylon for corrosion resistance in marine electrical systems. It carries a 500A momentary rating and a 75A continuous rating at 12-24VDC, making it suitable for isolating a boat's battery from the electrical system when the vessel is not in use or during service work. A removable key is included so the switch can be locked in the Off position, adding a layer of security against unauthorized starts or electrical drain. The switch body measures 4 inches (A dimension), 1-5\/8 inches (B dimension), and 2-1\/4 inches (C dimension), with a 3\/8 inch stud diameter for connecting battery cable terminals. At just 0.29 pounds, it is a compact, lightweight component that mounts easily in tight helm or engine bay locations. This is a straightforward On\/Off function switch (not a dual-battery selector), designed for boaters who need a reliable, simple main power disconnect. The nylon housing and screw terminal construction are built to withstand the vibration and moisture typical of marine environments.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420600-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e On\/Off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12-24 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Amps:\u003c\/strong\u003e 75 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMomentary Amps:\u003c\/strong\u003e 500 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Diameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.29 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey:\u003c\/strong\u003e Removable key included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage rating of the Sea-Dog 420600-1 battery switch?\u003c\/strong\u003e The Sea-Dog 420600-1 is rated for 500 amps momentary and 75 amps continuous at 12-24VDC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this battery switch come with a key?\u003c\/strong\u003e Yes, the 420600-1 includes a removable key that lets you lock the switch in the Off position for added security.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 420600-1 a dual-battery selector switch?\u003c\/strong\u003e No, it is a simple On\/Off function switch, not a selector for switching between multiple battery banks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 420600-1 battery switch made from?\u003c\/strong\u003e It is made from injection molded nylon, chosen for its resistance to corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 420600-1 battery switch?\u003c\/strong\u003e The switch measures 4 inches by 1-5\/8 inches by 2-1\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 420600-1 battery switch weigh?\u003c\/strong\u003e It weighs 0.29 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the stud diameter on the Sea-Dog 420600-1?\u003c\/strong\u003e The stud diameter is 3\/8 inch, sized for standard battery cable terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage systems is the Sea-Dog 420600-1 compatible with?\u003c\/strong\u003e It is rated for 12-24VDC systems, covering both 12-volt and 24-volt marine electrical setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Sea-Dog 420600-1 be used to fully disconnect a boat's battery?\u003c\/strong\u003e Yes, its On\/Off function is designed to isolate the battery from the electrical system, which is useful during storage or servicing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many units come in a standard pack of the Sea-Dog 420600-1?\u003c\/strong\u003e The standard pack quantity for the 420600-1 is 10 each.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988778791131,"sku":"S-D-420600-1","price":23.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5027.jpg?v=1784429391"},{"product_id":"sea-dog-422760-1-battery-switch-with-knob-off-1-both-2-selector-300a-48v-for-marine-battery-banks","title":"Sea-Dog Battery Selector Switch 422760-1, Off\/1\/Both\/2, 48V 300A, Nylon\/Brass","description":"\u003cp\u003eThe Sea-Dog 422760-1 is a four-position battery disconnect and selector switch built to isolate or combine two battery banks aboard a boat. Turning the knob through Off, 1, Both, and 2 lets the operator run off a single battery, combine both banks for extra reserve, or shut the electrical system down completely for storage or service. The switch is rated 48 volts DC at 300 amps, with 3\/8 inch diameter studs for heavy-gauge cable connections.\u003c\/p\u003e\u003cp\u003eConstruction is injection molded nylon for the housing with machined brass contacts at the switching points, giving corrosion resistance along with a low-resistance current path. The switch is ignition protected and rated safe for installation on gasoline powered boats. It can be mounted on the surface of a panel or from behind a panel for a flush look, and it installs with four #10 RH fasteners (not included).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 422760-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction\/Positions:\u003c\/strong\u003e Off\/1\/Both\/2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e 48 volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Rating:\u003c\/strong\u003e 300 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Diameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (A x B x C):\u003c\/strong\u003e 2-3\/4 inches x 2-3\/4 inches x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.534 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection molded nylon housing with machined brass contacts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface or rear panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Four #10 RH fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Ignition protected, safe for gasoline powered boats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514425407\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for boats requiring a four-position battery disconnect and selector switch; ignition protected for safe use on gasoline powered boats.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo manufacturer cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat do the switch positions on the Sea-Dog 422760-1 do?\u003c\/strong\u003e The 422760-1 has four positions: Off, 1, Both, and 2. Off disconnects everything, 1 and 2 each run off a single battery bank, and Both combines the two banks together, for example to boost a weak battery with the other bank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this battery switch safe for a gasoline powered boat?\u003c\/strong\u003e Yes, the Sea-Dog 422760-1 is ignition protected and rated safe for installation on gasoline powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage and voltage rating of the 422760-1?\u003c\/strong\u003e It is rated for 48 volts DC at 300 amps continuous.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size cable studs does this switch use?\u003c\/strong\u003e The 422760-1 has 3\/8 inch diameter studs for connecting battery cables.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this switch be mounted behind a panel?\u003c\/strong\u003e The 422760-1 can be mounted either on the surface of a panel or from behind the panel for a flush, rear-mount installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 422760-1 made of?\u003c\/strong\u003e The housing is injection molded nylon and the internal contacts are machined brass, a combination chosen for corrosion resistance and reliable current flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 422760-1 weigh?\u003c\/strong\u003e This battery selector switch weighs 0.534 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this switch?\u003c\/strong\u003e The 422760-1 measures 2-3\/4 inches by 2-3\/4 inches by 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the switch come with mounting hardware?\u003c\/strong\u003e No, the 422760-1 installs with four #10 RH fasteners, but those fasteners are not included and must be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 422760-1 and the 422761-1 switch?\u003c\/strong\u003e The 422760-1 is a four-position Off\/1\/Both\/2 switch that can isolate or combine two battery banks, while the 422761-1 is a simpler two-position On\/Off switch for a single battery and single load group.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this switch combine two battery banks?\u003c\/strong\u003e Yes, setting the 422760-1 to the Both position combines the two battery banks, which the simpler On\/Off version of this switch family cannot do.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this battery switch include a knob?\u003c\/strong\u003e Yes, the Sea-Dog 422760-1 is a knob-operated battery switch used to select between Off, battery 1, Both, and battery 2.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988779217115,"sku":"S-D-422760-1","price":39.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5051.jpg?v=1784429466"},{"product_id":"sea-dog-422761-1-compact-battery-switch-on-off-48v-300a-marine-master-disconnect-with-knob","title":"Sea-Dog Compact Battery Switch 422761-1, On\/Off, 48V 300A, 3\/8 Inch Stud","description":"\u003cp\u003eThe Sea-Dog Compact Battery Switch 422761-1 is an On\/Off battery disconnect switch built to isolate a single battery from its load group aboard a boat. It is rated for 48 volts and 300 amps, making it suitable for cutting power to onboard electrical systems when the boat is not in use, which helps prevent parasitic battery drain and protects the electrical system during storage or servicing. The switch is constructed of injection molded nylon with machined brass contacts for durable, corrosion-resistant switching, and it is ignition protected, making it safe for installation on gasoline powered boats.\u003c\/p\u003e\u003cp\u003eThis compact design measures 2-3\/4 inches by 2-3\/4 inches by 3 inches and can be installed either as a surface mount or a rear panel mount, giving flexibility for different helm or engine compartment layouts. The stud diameter is 3\/8 inch to accept common battery cable terminals. Installation requires four #10 RH fasteners, which are not included and must be sourced separately. This On\/Off switch is a single-battery, single-load-group disconnect and does not include the Both\/1\/2 selector functions found on other Sea-Dog battery switches.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 422761-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e On\/Off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 48 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 300 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Diameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 2-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.88 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection molded nylon with machined brass contacts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface or rear panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Required:\u003c\/strong\u003e Four #10 RH fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Ignition protected, safe for gasoline powered boats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514425414\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sea-Dog 422761-1 battery switch do?\u003c\/strong\u003e The Sea-Dog 422761-1 is an On\/Off battery disconnect switch that isolates a single battery from its load group, allowing you to cut power to the boat's electrical system entirely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a selector switch with Both\/1\/2 positions?\u003c\/strong\u003e No, part number 422761-1 is a simple On\/Off switch for a single battery and load group; it does not have the Off\/1\/Both\/2 selector positions found on Sea-Dog's dual-bank switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and amperage is the 422761-1 rated for?\u003c\/strong\u003e This Sea-Dog battery switch is rated for 48 volts and 300 amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this switch be mounted on gasoline powered boats?\u003c\/strong\u003e Yes, the Sea-Dog 422761-1 is ignition protected, which makes it safe for installation on gasoline powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog 422761-1 battery switch mounted?\u003c\/strong\u003e It can be installed as either a surface mount or a rear panel mount, giving flexibility depending on the layout of the helm or engine compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size stud does the 422761-1 use for cable connections?\u003c\/strong\u003e The stud diameter on this Sea-Dog battery switch is 3\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this battery switch?\u003c\/strong\u003e The Sea-Dog 422761-1 measures 2-3\/4 inches by 2-3\/4 inches by 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 422761-1 battery switch made from?\u003c\/strong\u003e It is constructed of injection molded nylon with machined brass contacts for durable, corrosion-resistant operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with the 422761-1?\u003c\/strong\u003e No, installation requires four #10 RH fasteners, which are not included and need to be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 422761-1 battery switch weigh?\u003c\/strong\u003e This battery switch weighs 7.88 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 422761-1 and the 422760-1 switch?\u003c\/strong\u003e The 422761-1 is an On\/Off switch for a single battery, while the 422760-1 offers Off\/1\/Both\/2 selector functions and can isolate or combine two battery banks; both share the same 2-3\/4 inch by 2-3\/4 inch by 3 inch dimensions and 3\/8 inch stud diameter.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988779413723,"sku":"S-D-422761-1","price":33.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5051_811c532c-8f57-43ce-8ebc-b70ffdd66060.jpg?v=1784429475"},{"product_id":"blue-sea-systems-3000-hd-series-heavy-duty-on-off-battery-switch-600a-continuous-grey","title":"Blue Sea Systems 3000 Single Circuit ON-OFF Battery Switch, 600 Amp, Grey","description":"\u003cp\u003eThe Blue Sea Systems 3000 is an HD-Series Single Circuit ON-OFF battery switch that connects a single battery to a single load group. It is built for marine electrical systems that need reliable, heavy-duty disconnect control at the helm or in the engine compartment. The switch carries a 600 Amp continuous current rating at up to 32 Volts DC and accepts two 4\/0 AWG (95 mm2) battery cables using 1\/2 inch terminal studs, making it suitable for high-current DC circuits found on larger boats.\u003c\/p\u003e\u003cp\u003eConstruction is a Grey plastic housing with copper contacts, mounted via a panel-mount rotary actuator with 2 positions (ON and OFF). The switch carries an IP66 waterproof rating and meets ISO 8846 marine switch standards, and it is ignition protected, meaning it is safe to install aboard gasoline powered boats without creating a spark ignition hazard around fuel vapors. It also meets ABYC (American Boat and Yacht Council) requirements for marine electrical installations.\u003c\/p\u003e\u003cp\u003eThis is the standard Single Circuit ON-OFF version without Alternator Field Disconnect (AFD). Blue Sea Systems also offers this same switch configuration with AFD as a separate model, which protects the alternator's diodes if the switch is turned to the OFF position while the engine is still running.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 3000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Single Circuit ON-OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Current Rating:\u003c\/strong\u003e 600 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 32 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Stud Size:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Acceptance:\u003c\/strong\u003e Two 4\/0 AWG (95 mm2) battery cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e ISO 8846\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protected:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Rotary\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9 x 7 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085030001\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 3000 battery switch do?\u003c\/strong\u003e It is a Single Circuit ON-OFF battery switch that connects or disconnects a single battery from a single load group, giving a simple, heavy-duty disconnect point for a marine DC electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 3000 safe to install in a gasoline powered boat?\u003c\/strong\u003e Yes, the 3000 switch is ignition protected, which means it is designed not to create a spark ignition source and is safe for installation aboard gasoline powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current and voltage rating of the 3000 switch?\u003c\/strong\u003e The Blue Sea Systems 3000 carries a 600 Amp continuous current rating at up to 32 Volts DC, suitable for heavy-duty marine battery circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size battery cables does the 3000 switch accept?\u003c\/strong\u003e It accepts two 4\/0 AWG (95 mm2) battery cables, terminating on 1\/2 inch terminal studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 3000 waterproof?\u003c\/strong\u003e The 3000 switch has an IP66 waterproof rating and meets the ISO 8846 standard for marine switches, and it also meets ABYC requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Blue Sea Systems 3000 battery switch made from?\u003c\/strong\u003e The housing is Grey plastic with copper contacts, and the switch uses a panel-mount rotary actuator with 2 positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 3000 weigh?\u003c\/strong\u003e The 3000 battery switch weighs 1.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the Blue Sea Systems 3000?\u003c\/strong\u003e Item dimensions for the 3000 switch are 9 x 7 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Blue Sea Systems 3000 and 3001 switches?\u003c\/strong\u003e Both the 3000 and 3001 are Single Circuit ON-OFF battery switches, but the 3001 adds Alternator Field Disconnect (AFD), which protects the alternator's diodes if the switch is turned to OFF while the engine is running. The 3000 does not include this AFD feature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many positions does the Blue Sea Systems 3000 switch have?\u003c\/strong\u003e The 3000 is a 2-position switch: ON and OFF.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Blue Sea Systems 3000 mount on a panel?\u003c\/strong\u003e Yes, the 3000 uses a panel-mount design with a rotary actuator for switching between ON and OFF.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with the Blue Sea Systems 3000 battery switch?\u003c\/strong\u003e The Blue Sea Systems 3000 Single Circuit ON-OFF battery switch carries UPC 632085030001.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989490348251,"sku":"BSS-3000","price":103.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3000.jpg?v=1784507393"},{"product_id":"blue-sea-systems-3002-heavy-duty-4-position-battery-selector-switch-500a-continuous-ignition-protected-ip66","title":"Blue Sea Systems 3002 Heavy-Duty 4-Position Battery Selector Switch, 500A Continuous","description":"\u003cp\u003eThe Blue Sea Systems 3002 is a heavy-duty, 4-position battery selector switch built to isolate battery banks from all loads or combine battery banks to power all loads aboard a boat. Turning the rotary knob to OFF, 1, 2, or BOTH lets the operator control exactly how the battery banks connect to the vessel's electrical system, which is essential for isolating a cranking battery from house loads or combining banks in an emergency.\u003c\/p\u003e\u003cp\u003eThe switch is ignition protected, making it safe for installation aboard gasoline-powered boats, and it carries an IP66 rating so it is protected against powerful water jets in an open engine compartment or helm station. A tactile indicator lets the operator feel the knob's position without needing to see it, which is useful in low light or when reaching the switch by feel. The housing is constructed of plastic with tin-plated copper contacts, and the switch accepts two 4\/0 AWG (95 mm squared) battery cables per terminal on 1\/2 inch terminal studs. An Icon Circuit Identification Label Kit (7902) is available separately for labeling the switch positions to match the vessel's specific circuits.\u003c\/p\u003e\u003cp\u003eThe 3002 is rated for a continuous current of 500 amps, an intermittent (5 minute) rating of 700 amps, and a cranking rating of 1,600 amps for 30 seconds, at a maximum operating voltage of 32 volts DC. It is panel mounted and meets CE marking, ISO 8846, UL 1107, ABYC, UL 1500, and SAE J1171 external ignition protection requirements, making it suitable for use as a primary battery selector switch on gasoline or diesel powered boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 3002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Heavy-Duty Battery Selector Switch, 4-Position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 500 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Rating (5 min):\u003c\/strong\u003e 700 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCranking Rating (30 sec):\u003c\/strong\u003e 1,600 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Voltage:\u003c\/strong\u003e 32 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Stud Size:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Capacity:\u003c\/strong\u003e Two 4\/0 AWG (95 mm squared) battery cables per terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulatory Compliance:\u003c\/strong\u003e CE marked, ISO 8846, UL Listed (UL 1107), meets ABYC requirements, meets UL 1500 and SAE J1171 external ignition protection requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Tin-plated Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Beige\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 9 x 6 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessory:\u003c\/strong\u003e Icon Circuit Identification Label Kit 7902 (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 3002 battery switch do?\u003c\/strong\u003e It switches isolated battery banks to all loads or combines battery banks to power all loads, letting the operator control which batteries are connected to the boat's electrical system via a 4-position rotary knob (OFF, 1, 2, BOTH).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 3002 safe to install on a gasoline powered boat?\u003c\/strong\u003e Yes. The 3002 is ignition protected and meets UL 1500 and SAE J1171 external ignition protection requirements, so it is rated for installation aboard gasoline-powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the continuous amperage rating of the 3002 switch?\u003c\/strong\u003e The Blue Sea Systems 3002 is rated for 500 amps continuous, 700 amps intermittent for 5 minutes, and 1,600 amps cranking for 30 seconds, at a maximum operating voltage of 32 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size battery cables does the 3002 accept?\u003c\/strong\u003e Each terminal on the 3002 accepts two 4\/0 AWG (95 mm squared) battery cables, with a terminal stud size of 1\/2 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the switch waterproof?\u003c\/strong\u003e The 3002 carries an IP66 rating, meaning it is protected against powerful water jets, and it is also rated to ISO 8846 for marine ignition protection standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 3002 switch made of?\u003c\/strong\u003e The housing is constructed of plastic with tin-plated copper contacts inside the switch mechanism.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know what position the 3002 knob is in without looking?\u003c\/strong\u003e The Blue Sea Systems 3002 has a tactile indicator built into the knob that conveys its position by feel, so the operator can identify OFF, 1, 2, or BOTH without needing to see the switch face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 3002 battery switch weigh?\u003c\/strong\u003e It weighs 1.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 3002?\u003c\/strong\u003e The 3002 measures 9 x 6 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 3002 different from Blue Sea Systems' 3000 and 3001 switches?\u003c\/strong\u003e The 3002 is rated for 500 amps continuous, 700 amps intermittent, and 1,600 amps cranking, while the 3000 and 3001 switches are rated higher at 600 amps continuous, 900 amps intermittent, and 1,750 amps cranking; both share the same 32 volt DC maximum operating voltage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I label the switch positions for my specific battery banks?\u003c\/strong\u003e Yes, the Icon Circuit Identification Label Kit (part number 7902) is available separately and can be used to label the 3002's switch positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Blue Sea Systems part?\u003c\/strong\u003e Yes, this is the genuine Blue Sea Systems 3002 heavy-duty 4-position battery selector switch, not an aftermarket equivalent.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989490905307,"sku":"BSS-3002","price":130.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3002.jpg?v=1784507001"},{"product_id":"blue-sea-systems-6004-m-series-on-off-battery-switch-with-locking-key-red-300a-continuous-ignition-protected","title":"Blue Sea Systems 6004 m-Series Battery Disconnect Switch with Locking Key, Red, 300 Amp Continuous","description":"\u003cp\u003eThe Blue Sea Systems 6004 is an on\/off battery disconnect switch built to manage a single battery connected to a single load group on a boat's DC electrical system. It uses a removable locking key so the operator can pull the knob and lock out the circuit, helping prevent accidental current flow or unauthorized use while the boat is unattended or during electrical service. The switch is ignition protected, making it suitable for mounting inside the engine room of gasoline powered boats where protected components are required. Its compact housing supports three mounting options -- surface, rear, or front mount -- so it can be fitted into tight panel layouts or limited engine room space, and breakout tabs on the housing allow wiring to be routed from any direction. Connections are made through one-piece, tin-plated copper terminal studs measuring 7\/8 inch, sized to accept multiple cables for a secure, corrosion-resistant connection. Electrically, the 6004 is rated for 300 amps continuous duty, 500 amps intermittent (5 minute), and 900 amps cranking (30 second), at up to 48 volts DC. The 6004 does not ship with the 6-circuit label set included on some other switches in the same family; buyers who want circuit labeling can add the Icon Circuit Identification Label Kit (7902), sold separately. It is finished in red and backed by a lifetime warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6004\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e On\/Off Battery Disconnect Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e OFF-NONE-ON with removable locking key\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 300 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Rating (5 minute):\u003c\/strong\u003e 500 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCranking Rating (30 second):\u003c\/strong\u003e 900 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Voltage:\u003c\/strong\u003e 48 volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface, rear, or front mount (panel mount)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Studs:\u003c\/strong\u003e One-piece, tin-plated copper, 7\/8 inch, accept multiple cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Suitable for engine rooms of gasoline powered boats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7 x 4 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.65 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085060046\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 6004 battery switch do?\u003c\/strong\u003e The 6004 is an on\/off disconnect switch that manages a single battery connected to a single load group, letting the operator fully cut DC power with a removable locking key to prevent accidental or unauthorized current flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of the 6004 switch?\u003c\/strong\u003e It is rated for 300 amps continuous, 500 amps intermittent over 5 minutes, and 900 amps cranking over 30 seconds, at up to 48 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 6004 be mounted in an engine room with a gasoline engine?\u003c\/strong\u003e Yes, the 6004 is ignition protected, so it can be installed in the engine room of a gasoline powered boat where protected electrical components are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting options does the 6004 support?\u003c\/strong\u003e Surface, rear, or front mounting are all supported, giving flexibility to fit the switch into different panel layouts or tight engine room spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 6004 include a locking key?\u003c\/strong\u003e Yes, the Blue Sea Systems 6004 has a removable knob with a locking key so the switch can be locked in the off position during service or when the boat is unattended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the terminal studs on the 6004?\u003c\/strong\u003e The 6004 uses one-piece, tin-plated copper terminal studs measuring 7\/8 inch, sized to accept multiple cables for a secure connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 6004 come with circuit labels?\u003c\/strong\u003e No, the 6-circuit label set that ships with some other switches in this family is not included with the 6004; the Icon Circuit Identification Label Kit (7902) is available separately for labeling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 6004 switch?\u003c\/strong\u003e The Blue Sea Systems 6004 is finished in red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 6004 battery switch weigh?\u003c\/strong\u003e It weighs 0.65 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 6004?\u003c\/strong\u003e The 6004 measures 7 x 4 x 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 6004 switch housing made of?\u003c\/strong\u003e The housing is plastic, paired with tin-plated copper terminal studs for the electrical connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 6004 covered by a warranty?\u003c\/strong\u003e Yes, the Blue Sea Systems 6004 is backed by a lifetime warranty.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989505061083,"sku":"BSS-6004","price":40.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6004.jpg?v=1784507118"},{"product_id":"blue-sea-systems-5511e-e-series-dual-circuit-plus-battery-switch-350a-32v-dc-dual-battery-bank-on-off-combine-ip66-ignition-protected","title":"Blue Sea Systems e-Series Dual Circuit Plus Battery Switch 5511E, 350A, 32V DC, Dual Battery Bank","description":"\u003cp\u003eThe Blue Sea Systems e-Series Dual Circuit Plus Battery Switch, part number 5511E, is a dual battery bank switch built for inboard and outboard powered boats running alternators up to 120A. It switches two battery banks simultaneously while maintaining battery bank isolation, and lets the operator combine the two banks together in the event of a low start battery. The switch's compact design makes it practical to install in tight spaces, and it offers multiple mounting options, including surface mount or mounting to the rear of a panel. It is ignition protected, so it can be installed in the engine room of a gasoline powered boat.\u003c\/p\u003e\u003cp\u003eElectrical connections are made through one piece copper studs measuring 7\/8 inch long, which accept multiple cable connections and hold up to the tinned copper contacts inside the switch for a secure electrical path. The switch operates in ON-OFF-COMBINE mode through a rotary actuator with a normally closed contact type, and the face has tactile textures so the operator can identify the switch position by feel in low light or no light conditions. The housing carries an IP66 rating, protecting the switch against powerful water jets. This model does not include an alternator field disconnect.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5511E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rotary\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e ON-OFF-COMBINE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 350 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 32 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Stud\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Length:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Tinned Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3.85 x 3.85 x 3.1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 2-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount, Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Alternator Rating:\u003c\/strong\u003e 120 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085551155\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 5511E battery switch do?\u003c\/strong\u003e The 5511E is an e-Series Dual Circuit Plus battery switch that controls two battery banks at once. It can switch both banks simultaneously while keeping them isolated from each other, or combine them together when a start battery is low.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 5511E switch safe for a gasoline engine room?\u003c\/strong\u003e Yes, the 5511E is ignition protected, which means it is rated for installation in the engine room of a gasoline powered boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current and voltage rating of the 5511E?\u003c\/strong\u003e The Blue Sea Systems 5511E is rated for 350 Amps at 32 Volts DC, and it is intended for use with alternators up to 120A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the 5511E battery switch?\u003c\/strong\u003e The 5511E measures 3.85 x 3.85 x 3.1 inches and weighs 1.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 5511E battery switch mounted?\u003c\/strong\u003e The 5511E can be surface mounted or mounted to the rear of a panel, giving flexibility for installation in tight spaces aboard a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of wire connections does the 5511E use?\u003c\/strong\u003e The 5511E uses one piece copper studs measuring 7\/8 inch long that accept multiple cable connections, with tinned copper contacts inside the switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5511E have an alternator field disconnect?\u003c\/strong\u003e No, the Blue Sea Systems 5511E does not include an alternator field disconnect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat switch positions does the 5511E offer?\u003c\/strong\u003e The 5511E is a rotary switch with two positions operating in ON-OFF-COMBINE mode, allowing the two battery banks to be switched together or isolated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow water resistant is the 5511E battery switch?\u003c\/strong\u003e The 5511E carries an IP66 rating, meaning it is protected against powerful water jets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the switch position be identified in the dark?\u003c\/strong\u003e Yes, the 5511E has tactile textures on its face so the switch position can be felt and operated in low light or no light conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 5511E battery switch?\u003c\/strong\u003e The Blue Sea Systems 5511E is red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the 5511E battery switch designed for?\u003c\/strong\u003e The 5511E is designed as a battery bank solution for both inboard and outboard powered boats.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989505126619,"sku":"BSS-5511E","price":71.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5511e_1__55625.1739460505.500.750.jpg?v=1785329072"},{"product_id":"blue-sea-systems-6006-m-series-on-off-battery-switch-with-removable-red-knob-32v-dc-300a-continuous-ignition-protected","title":"Blue Sea Systems m-Series Battery Switch 6006, ON\/OFF with Removable Knob, 300A Continuous, 48V DC, Red","description":"\u003cp\u003eThe Blue Sea Systems 6006 is an m-Series battery switch built to control power to a single battery and a single load group aboard a boat. Its compact housing supports installation in tight electrical panels or engine room spaces where mounting room is limited, and it can be installed by surface mounting or by front or rear panel mounting depending on the layout of the installation.\u003c\/p\u003e\u003cp\u003eThe switch uses a rotary ON\/OFF design operated with a removable knob. Taking the knob off the shaft helps prevent accidental current flow while work is being done on the DC electrical system, adding a layer of safety during service or storage. The switch face is designed for use in low light, and the unit carries ignition protection, making it suitable for mounting in the engine rooms of gasoline powered boats where protected electrical components are required.\u003c\/p\u003e\u003cp\u003eConnections are made through one-piece, tin plated copper studs measuring 7\/8 inch, sized to accept multiple cables at a single connection point for a durable, corrosion-resistant electrical joint. The 6006 is rated for a maximum operating voltage of 48V DC, with a 300 amp continuous rating, a 500 amp intermittent rating for 5 minutes, and a 900 amp cranking rating for 30 seconds. It is CE marked, ISO 8846 compliant, UL Listed to UL 1107 for electric power switches, and meets American Boat and Yacht Council (ABYC) requirements. An Icon Circuit Identification Label Kit is available separately for labeling this switch and other circuits on the panel.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6006\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rotary, manual ON\/OFF with removable knob\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Configuration:\u003c\/strong\u003e Single battery, single load group, 2-position (On\/Off)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCranking Rating:\u003c\/strong\u003e 900 Amps (30 seconds)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Rating:\u003c\/strong\u003e 500 Amps (5 minutes)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 300 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Voltage:\u003c\/strong\u003e 48 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 14400 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Studs:\u003c\/strong\u003e One-piece tin plated copper, 7\/8 inch, accepts multiple cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface, front panel, or rear panel mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Yes, suitable for gasoline engine rooms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine grade metals, polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3 x 4 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulatory:\u003c\/strong\u003e CE marked, ISO 8846, UL Listed (UL 1107), meets ABYC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085060060\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the continuous current rating of the Blue Sea Systems 6006 battery switch?\u003c\/strong\u003e The 6006 is rated for 300 amps continuous, with a 500 amp intermittent rating for 5 minutes and a 900 amp cranking rating for 30 seconds, all at a maximum of 48 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the knob be removed from the 6006 switch?\u003c\/strong\u003e Yes, the 6006 features a removable knob that, once taken off, helps prevent accidental current flow in the DC system, which is useful during electrical service work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 6006 safe to install in a gasoline engine room?\u003c\/strong\u003e Yes, the 6006 carries ignition protection, making it suitable for installation in the engine rooms of gasoline powered boats where protected electrical components are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 6006 battery switch mounted?\u003c\/strong\u003e It supports surface mounting, front panel mounting, or rear panel mounting, giving flexibility to fit different panel layouts and installation spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size cables can connect to the 6006?\u003c\/strong\u003e The 6006 uses one-piece, tin plated copper studs measuring 7\/8 inch that are sized to accept multiple cables at each connection point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the 6006 battery switch?\u003c\/strong\u003e The Blue Sea Systems 6006 measures 3 x 4 x 6 inches and weighs 0.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 6006 battery switch used for?\u003c\/strong\u003e It is used to control power to a single battery and a single load group, letting a boat owner manually turn the battery connection on or off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 6006 meet marine safety and regulatory standards?\u003c\/strong\u003e Yes, the 6006 is CE marked, complies with ISO 8846, is UL Listed to UL 1107 for electric power switches, and meets American Boat and Yacht Council (ABYC) requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 6006 switch made of?\u003c\/strong\u003e The 6006 is constructed of marine grade metals and polycarbonate, with tin plated copper terminal studs for the electrical connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a labeling accessory available for the 6006?\u003c\/strong\u003e An Icon Circuit Identification Label Kit is available as a separate accessory for labeling the 6006 and other circuits on an electrical panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Blue Sea Systems 6006 switch?\u003c\/strong\u003e The 6006 is finished in red.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989505683675,"sku":"BSS-6006","price":36.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6006.jpg?v=1784507126"},{"product_id":"blue-sea-systems-6005-m-series-battery-switch-on-off-with-removable-key-300a-continuous-48v-dc-marine-battery-disconnect","title":"Blue Sea Systems m-Series Battery Switch with Key, Part 6005, 48V DC, 300A Continuous","description":"\u003cp\u003eThe Blue Sea Systems m-Series Battery Switch, part number 6005, is a key-operated battery switch built for boats that need reliable manual control over DC circuit power. Unlike knob-operated switches in the m-Series line, the 6005 uses a key for operation, which supports controlled access to the switch position and helps prevent unintended power flow when the key is removed. It is rated for a 900 amp cranking load for 30 seconds, a 500 amp intermittent load for 5 minutes, and a 300 amp continuous load, with a maximum operating voltage of 48 volts DC, making it suited to demanding DC power distribution tasks on board.\u003c\/p\u003e\u003cp\u003eThe switch includes breakout tabs that allow wire access in any direction, giving installers flexibility when routing cables to the switch during installation. A 6-circuit label set is not included with the 6005, so installers who want printed circuit labeling will need to source that separately; an Icon Circuit Identification Label Kit, part number 7902, is available as a separate accessory for circuit identification.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6005\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Operation:\u003c\/strong\u003e Key-operated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCranking Rating (30 seconds):\u003c\/strong\u003e 900 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Rating (5 minutes):\u003c\/strong\u003e 500 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 300 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Voltage:\u003c\/strong\u003e 48 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.62 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085060053\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Label Set Included:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Access:\u003c\/strong\u003e Breakout tabs allow wire access in any direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Accessory:\u003c\/strong\u003e Icon Circuit Identification Label Kit, part number 7902 (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 6005 battery switch key-operated or knob-operated?\u003c\/strong\u003e The 6005 is a key-operated battery switch, distinguishing it from knob-operated switches elsewhere in the Blue Sea Systems m-Series lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum operating voltage of the 6005 battery switch?\u003c\/strong\u003e 48 Volts DC is the maximum operating voltage for the Blue Sea Systems 6005.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much current can the 6005 battery switch handle?\u003c\/strong\u003e The 6005 is rated for a 900 amp cranking load for 30 seconds, a 500 amp intermittent load for 5 minutes, and a 300 amp continuous load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 6005 battery switch come with circuit labels?\u003c\/strong\u003e No, a 6-circuit label set is not included with the Blue Sea Systems 6005; it is included with some other switches in the m-Series line but not this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I add circuit identification labels to the 6005 separately?\u003c\/strong\u003e Yes, the Icon Circuit Identification Label Kit, part number 7902, is available as a separate accessory for use with the 6005 battery switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 6005 weigh?\u003c\/strong\u003e The 6005 battery switch weighs 0.62 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does wire routing work with the 6005 battery switch?\u003c\/strong\u003e The 6005 has breakout tabs that allow wire access in any direction, giving flexibility when routing cables during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Blue Sea Systems 6005 battery switch?\u003c\/strong\u003e The UPC for the Blue Sea Systems 6005 battery switch is 632085060053.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 6005 the same switch as the Blue Sea Systems 6006?\u003c\/strong\u003e No, the 6005 and 6006 are different parts; the 6005 is key-operated with a 48 Volt DC maximum rating, while the 6006 is a separate model with a knob-operated design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the 6005 battery switch?\u003c\/strong\u003e The 6005 battery switch is manufactured by Blue Sea Systems.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989505716443,"sku":"BSS-6005","price":36.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6005.jpg?v=1784507122"},{"product_id":"blue-sea-systems-6008-m-series-mini-battery-selector-switch-3-position-off-none-on-red-300a-continuous-ignition-protected","title":"Blue Sea Systems 6008 m-Series Mini 3-Position Battery Switch, Red","description":"\u003cp\u003eThe Blue Sea Systems 6008 is a compact m-Series Mini battery switch built to manage a single battery connected to a single load group aboard a boat. Its small footprint and three available mounting options (surface, flush, or rear-of-panel mounting) let it fit into tight helm stations or engine room panels where space is limited. The switch includes an emergency combine feature that lets you draw power from both batteries during engine starting or when running essential electronics, which is useful if one battery bank runs low. A make-before-break contact design allows switching between battery banks without a power interruption, helping maintain continuity to connected loads during the transition.\u003c\/p\u003e\u003cp\u003eBecause it carries ignition protection, the 6008 is suitable for mounting in the engine room of gasoline-powered boats, including locations that require ignition-protected components. The switch face has a tactile surface, and the knob is removable, which supports safe operation in low-light conditions and helps prevent unintended power flow while servicing the electrical system. The terminal studs are tin-plated copper, built as a single piece, and sized to accept multiple cable connections while keeping the fastening secure. The switch is finished in red and rated for a 300 amp continuous load per circuit, making it a straightforward option for basic single-battery, single-load-group control on boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6008\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e m-Series Mini Battery Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 3 (OFF-NONE-ON)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 300 Amps per circuit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 48 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch\/Actuator Type:\u003c\/strong\u003e Rotary\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Design:\u003c\/strong\u003e Make-before-break\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Options:\u003c\/strong\u003e Surface, flush, or rear-of-panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Studs:\u003c\/strong\u003e Tin-plated copper, single-piece construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Yes, suitable for gasoline engine rooms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulatory:\u003c\/strong\u003e CE marked, ISO 8846, UL Listed (UL 1107), meets ABYC standards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7 x 4 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.77 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085060084\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 6008 battery switch do?\u003c\/strong\u003e It manages power flow from a single battery to a single load group, letting you turn the connection OFF or ON, with a combine position to draw from both batteries for engine starting or essential loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 6008 safe to mount in a gasoline engine room?\u003c\/strong\u003e Yes, the 6008 includes ignition protection, so it can be installed in the engine room of gasoline-powered boats in locations that require ignition-protected components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many amps can the 6008 handle continuously?\u003c\/strong\u003e 300 amps per circuit on a continuous basis, which is the rating that applies to the Blue Sea Systems 6008 Mini battery switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the 6008 rated for?\u003c\/strong\u003e The 6008 is rated for 48 volts DC operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting options does the 6008 support?\u003c\/strong\u003e Three mounting methods are available: surface mount, flush mount, or rear-of-panel mount, which makes the 6008 adaptable to different helm or engine room layouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes switching battery banks on the 6008 interrupt power?\u003c\/strong\u003e No, the 6008 uses a make-before-break contact design, so power is not interrupted while switching between battery banks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the terminal connections like on the 6008?\u003c\/strong\u003e The Blue Sea Systems 6008 uses tin-plated copper terminal studs built as a single piece, sized to accept multiple cable connections while keeping fastening secure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 6008 come in?\u003c\/strong\u003e The 6008 is finished in red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the 6008?\u003c\/strong\u003e The 6008 measures 7 x 4 x 4 inches and weighs 0.77 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the knob be removed on the 6008 for security?\u003c\/strong\u003e Yes, the knob on the 6008 is removable, which helps prevent unintended power flow while servicing the boat's electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat regulatory standards does the 6008 meet?\u003c\/strong\u003e The 6008 is CE marked, meets ISO 8846, is UL Listed under UL 1107 for electric power switches, and meets American Boat and Yacht Council (ABYC) requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the 6008 battery switch?\u003c\/strong\u003e The Blue Sea Systems 6008 carries a lifetime warranty.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989505749211,"sku":"BSS-6008","price":71.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6008.jpg?v=1784507135"},{"product_id":"blue-sea-systems-6011-m-series-dual-circuit-plus-battery-switch-300a-red-two-bank-switching-with-emergency-combine","title":"Blue Sea Systems 6011 m-Series Dual Circuit Plus Battery Switch, Red","description":"\u003cp\u003eThe Blue Sea Systems 6011 m-Series Dual Circuit Plus Battery Switch is a compact marine battery switch built to manage two separate battery banks from a single control point. Unlike a basic single-circuit switch, the Dual Circuit Plus design switches both battery banks simultaneously while keeping the two banks electrically isolated from each other, so each bank stays dedicated to its own circuit during normal operation. In an emergency, such as a low or dead start battery, the switch can combine the two banks to provide extra cranking power or to run essential equipment. The make-before-break contact design changes between positions without interrupting power flow, which helps protect sensitive electronics from voltage spikes during switching.\u003c\/p\u003e\u003cp\u003eInstallation is flexible, with three mounting options: surface mount, flush mount, or rear-of-panel mount, allowing it to fit a variety of helm and engine room layouts. Ignition protection is built in, making the switch suitable for installation in the engine room of gasoline-powered boats. The switch face has a tactile surface and a removable knob, which helps with operation in low light and lets you lock out the switch to prevent unintended power flow while servicing the electrical system. Terminal studs are tin-plated copper, formed as a single piece with enough length to accept multiple cable connections and provide a secure fastening point. The housing carries an IP66 rating, meaning it is protected against powerful water jets, an important consideration for equipment mounted in an open engine room or exposed helm station.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6011\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Dual Circuit Plus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e ON-OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 300 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 32 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 9600 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Make Before Break\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Push Button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount (surface, flush, or rear-of-panel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper Temperature Rating:\u003c\/strong\u003e 85 Degrees Celsius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 7 x 4 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085060114\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Vehicle Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dual Circuit Plus design do differently from a standard battery switch?\u003c\/strong\u003e The Blue Sea Systems 6011 switches two battery banks simultaneously while keeping the two banks electrically isolated from each other, rather than simply connecting one battery to one load group. It also includes a combine feature to draw power from both banks together when needed, such as for engine starting or running essential equipment off a low battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I combine both battery banks if one battery is low?\u003c\/strong\u003e Yes. The 6011 battery switch lets you combine two battery banks in the event of a low start battery, providing extra power for starting the engine or running critical equipment before returning to isolated operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this switch safe to install in a gasoline engine compartment?\u003c\/strong\u003e Yes, the Blue Sea Systems 6011 includes ignition protection, so it is suitable for installation in the engine room of gasoline-powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 6011 switch rated for water and moisture exposure?\u003c\/strong\u003e It carries an IP66 rating, meaning the housing is protected against powerful water jets, which is useful for switches mounted in open engine rooms or exposed helm areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting options are available for this switch?\u003c\/strong\u003e The 6011 Dual Circuit Plus switch can be installed three ways: surface mounted, flush mounted, or mounted at the rear of a panel, giving flexibility for different helm and engine room layouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current and voltage rating of the Blue Sea Systems 6011?\u003c\/strong\u003e The 6011 is rated for 300 Amps at 32 Volts, with a maximum wattage rating of 9600 watts, and operates in an ON-OFF, 3-position configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the terminal studs made of?\u003c\/strong\u003e The switch uses tin-plated copper terminal studs built as a single piece, with sufficient length to connect multiple cables while maintaining a secure fastening point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the switch have a contact design that avoids power interruption?\u003c\/strong\u003e Yes, the 6011 uses a make-before-break contact design, which switches between battery banks without interrupting power flow, helping protect connected electronics during switching.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the physical dimensions and weight of this battery switch?\u003c\/strong\u003e The Blue Sea Systems 6011 measures 7 x 4 x 3 inches and weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the knob be removed to prevent someone from switching the battery banks?\u003c\/strong\u003e Yes, the 6011 has a removable knob, which can be taken off to help prevent unintended power flow while servicing the electrical system, along with a tactile switch face for use in low light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this switch come in?\u003c\/strong\u003e The Blue Sea Systems 6011 m-Series Dual Circuit Plus Battery Switch is finished in red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 6011 switch part of a larger charging system?\u003c\/strong\u003e The 6011 Dual Circuit Plus switch is designed to work alongside an automatic charging relay, which automatically combines battery banks for charging and isolates them again during discharge, giving a complete two-battery-bank management setup.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989506076891,"sku":"BSS-6011","price":58.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6011.jpg?v=1784507144"},{"product_id":"blue-sea-systems-6007-m-series-mini-4-position-battery-selector-switch-300a-continuous-ignition-protected","title":"Blue Sea Systems 6007 M-Series 4-Position Mini Selector Battery Switch, 300A Continuous, 32V DC, Red","description":"\u003cp\u003eThe Blue Sea Systems 6007 is a compact 4-position mini selector battery switch built to manage a single battery bank and its connected load group on a boat. It gives the operator OFF, 1, 2, and BOTH\/COMBINE positions, letting the vessel draw power from either battery individually or combine both battery banks together for engine starting or essential radio use when one battery is running low. The switch uses a make-before-break contact design, so the circuit stays connected while switching between battery banks and power is never interrupted mid-transition.\u003c\/p\u003e\u003cp\u003eIts small footprint supports installation in tight electrical panels or engine spaces, and it offers three mounting options: on the surface, flush-mounted, or at the rear of a panel, giving installers flexibility depending on available space. The switch carries ignition protection, making it suitable for mounting in the engine room of gasoline powered boats where protected electrical components are required. The switch face has a tactile surface, and the removable knob helps prevent accidental switching during electrical system service. Terminal studs are tin plated copper, built as a single piece, and sized to accept multiple cable connections while supporting a secure fastening point. A 6-circuit label set is included with the 6007 for marking connected circuits at installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6007\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e 4-Position Selector Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCranking Rating (30 sec):\u003c\/strong\u003e 900A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Rating (5 min):\u003c\/strong\u003e 500A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 300A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Voltage:\u003c\/strong\u003e 32V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Design:\u003c\/strong\u003e Make-before-break\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface, flush, or rear-of-panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Yes, suitable for gasoline engine rooms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic housing with tin plated copper terminal studs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 7 x 4 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.77 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Label Set:\u003c\/strong\u003e 6-circuit label set included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulatory Compliance:\u003c\/strong\u003e CE marked, ISO 8846, UL Listed (UL 1107 electric power)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 6007 battery switch do?\u003c\/strong\u003e The 6007 is a 4-position mini selector battery switch that lets a boat draw power from battery 1, battery 2, both batteries combined, or shut all power off, managing a single battery bank and its connected load group.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 6007 rated for use in a gasoline engine room?\u003c\/strong\u003e Yes, the 6007 includes ignition protection, so it is suitable for installation in the engine room of gasoline powered boats where protected electrical components are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum voltage and current rating of the 6007?\u003c\/strong\u003e The 6007 has a maximum operating voltage of 32V DC, a continuous rating of 300A, a 5-minute intermittent rating of 500A, and a 30-second cranking rating of 900A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Blue Sea 6007 mounted?\u003c\/strong\u003e The 6007 supports three mounting methods: surface mount, flush mount, or rear-of-panel mount, allowing installers to fit it into different panel layouts and limited spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes switching battery banks on the 6007 interrupt power?\u003c\/strong\u003e No. The 6007 uses a make-before-break contact design, so the circuit remains connected while switching between battery banks and power is not interrupted during the transition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the 6007 battery switch?\u003c\/strong\u003e The Blue Sea Systems 6007 measures 7 x 4 x 3 inches and weighs 0.77 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the terminal stud made of on the 6007?\u003c\/strong\u003e The 6007 uses tin plated copper terminal studs, built as a single piece, sized to accept multiple cable connections with a secure fastening point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 6007 come with circuit labels?\u003c\/strong\u003e Yes, the 6007 includes a 6-circuit label set for marking connected circuits, unlike the 6004 and 6005 switches, which do not include a label set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Blue Sea 6007 switch?\u003c\/strong\u003e The 6007 M-Series selector switch is red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat certifications does the 6007 carry?\u003c\/strong\u003e The Blue Sea Systems 6007 is CE marked, meets ISO 8846, and is UL Listed under UL 1107 for electric power applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the knob be removed from the 6007 switch?\u003c\/strong\u003e Yes, the 6007 has a removable knob, which helps prevent unintended switching or power flow during electrical system service.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989506240731,"sku":"BSS-6007","price":54.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6007.jpg?v=1784507130"},{"product_id":"blue-sea-systems-6010-m-series-mini-dual-circuit-battery-switch-300a-continuous-32v-dc-red","title":"Blue Sea Systems 6010 Dual Circuit Battery Switch, 300 Amp, Red","description":"\u003cp\u003eThe Blue Sea Systems 6010 is a Dual Circuit battery switch built to control two electrically isolated battery banks from a single compact unit. Unlike standard selector switches, the Dual Circuit design (used only on the 6010 and 55102 models) does not include a combine feature, so the positive and negative conductors of each bank stay electrically isolated at all times. This isolation is what allows the 6010 to safely disconnect the positive and negative conductors of a circuit simultaneously, something standard single-circuit selector switches should not be used for.\u003c\/p\u003e\u003cp\u003eThe switch is rated for 300 amps continuous at up to 32 volts DC and uses a make-before-break contact design so power is not interrupted while switching between battery banks. Tin-plated copper terminal studs are built as a single piece with enough length to accept multiple cable connections, and the copper contacts sit inside a red plastic housing rated IP66 for protection against dust and water. The switch is ignition protected, allowing installation in the engine room of gasoline-powered boats. A tactile switch face and removable knob help the user confirm switch position by feel and support locking out the switch during service.\u003c\/p\u003e\u003cp\u003eIts compact footprint supports installation in tight spaces, and it can be mounted three ways: on the surface, flush-mounted, or from the rear of a panel, making it adaptable to a range of helm and engine compartment layouts.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Dual Circuit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombine Feature:\u003c\/strong\u003e None (electrically isolated circuits)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e ON-ON-OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Current Rating:\u003c\/strong\u003e 300 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 32 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Design:\u003c\/strong\u003e Make-before-break\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Studs:\u003c\/strong\u003e Tin-plated copper, single piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Options:\u003c\/strong\u003e Surface, flush, or rear-of-panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Yes, rated for gasoline engine rooms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure Rating:\u003c\/strong\u003e IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 7 x 4 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Removable knob\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085060107\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 6010 battery switch do?\u003c\/strong\u003e The 6010 is a Dual Circuit battery switch that controls two electrically isolated battery banks from one compact unit, allowing the positive and negative conductors of a circuit to be disconnected simultaneously.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 6010 combine two battery banks together?\u003c\/strong\u003e No. The 6010 does not include a combine feature, so its two circuits remain electrically isolated from each other at all times, unlike combine-capable switches such as the Dual Circuit Plus.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the continuous amperage rating of the 6010 switch?\u003c\/strong\u003e The Blue Sea Systems 6010 is rated for 300 amps continuous at up to 32 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 6010 battery switch?\u003c\/strong\u003e The 6010 has a red plastic housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting options does the 6010 support?\u003c\/strong\u003e Three mounting methods are supported for the 6010: surface mount, flush mount, or mounting from the rear of a panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 6010 battery switch safe to install in a gasoline engine room?\u003c\/strong\u003e Yes, the 6010 includes ignition protection, which allows it to be installed in the engine room of gasoline-powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 6010 switch housing made of?\u003c\/strong\u003e The housing is plastic with copper contacts, and the switch carries an IP66 rating for protection against dust and water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 6010 weigh?\u003c\/strong\u003e The 6010 weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the terminal studs on the 6010 made of?\u003c\/strong\u003e The 6010 uses tin-plated copper terminal studs built as a single piece, sized to accept multiple cable connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 6010 different from a Dual Circuit Plus switch?\u003c\/strong\u003e The 6010 Dual Circuit switch keeps two battery banks fully isolated with no combine option, while a Dual Circuit Plus switch such as the 11001 can also combine battery banks to all loads and should not be used to switch positive and negative conductors simultaneously.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat enclosure rating does the 6010 carry?\u003c\/strong\u003e The Blue Sea Systems 6010 carries an IP66 enclosure rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 6010 battery switch?\u003c\/strong\u003e The 6010 measures 7 x 4 x 4 inches.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989506339035,"sku":"BSS-6010","price":71.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6010.jpg?v=1784507139"},{"product_id":"blue-sea-systems-7601-m-acr-automatic-charging-relay-12-24v-dc-65a-combines-battery-banks-for-outboard-inboard-alternators","title":"Blue Sea Systems 7601 m-ACR Automatic Charging Relay, 65 Amp 12\/24V DC","description":"\u003cp\u003eThe Blue Sea Systems 7601 m-ACR Automatic Charging Relay automatically combines battery banks when charging and isolates them when discharging, keeping house and engine circuits properly separated until an alternator is running. It is designed to manage charging current from alternators up to 65 Amps, the range found on most outboards and many inboard engines, making it a compact solution for dual-battery bank management. A Start Isolation (SI) function temporarily isolates house loads from the engine circuit during engine cranking, protecting sensitive house electronics from the voltage sags and spikes that occur when the starter draws current. The m-ACR operates automatically at 12V DC or 24V DC and switches up to 65 Amps of contact current through Normally Open, Quick Connect terminals with tinned brass contacts for corrosion resistance in a marine environment. Its compact housing supports three mounting styles: surface mount, rear mount, or panel mount, giving installers flexibility in tight helm or engine bay spaces. The m-ACR is also offered as a module within a Custom 360 Panel for builders who want it integrated into a larger electrical panel layout. With a 10 second operating time and a 9.5V under-voltage lockout threshold, the relay is built to respond predictably to real charging conditions rather than momentary voltage fluctuations, helping protect both battery banks from unwanted cross-connection or premature isolation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7601\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Automatic Charging Relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 65 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Current Rating:\u003c\/strong\u003e 65 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Switching Current:\u003c\/strong\u003e 65 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Switching Voltage:\u003c\/strong\u003e 24 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Switching Voltage:\u003c\/strong\u003e 10.8 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Voltage:\u003c\/strong\u003e 24 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification Met:\u003c\/strong\u003e 12V DC, 24V DC, 9.5V Under Voltage Lockout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1560 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Time:\u003c\/strong\u003e 10 Seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Quick Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Tinned Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Terminals:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount, Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085076016\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 7601 m-ACR do?\u003c\/strong\u003e It automatically combines two battery banks when the alternator is charging and isolates them again when charging stops, so the house bank cannot drain the starting bank between charges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum alternator output the m-ACR 7601 can handle?\u003c\/strong\u003e It is designed to manage charging current from alternators up to 65 Amps, the output range found on most outboards and many inboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 7601 work on both 12V and 24V systems?\u003c\/strong\u003e Yes, the m-ACR 7601 operates automatically on 12V DC or 24V DC systems and is rated for up to 24 Volts maximum switching voltage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is Start Isolation (SI) on the m-ACR?\u003c\/strong\u003e Start Isolation temporarily isolates house loads from the engine circuit during engine cranking, which protects sensitive house electronics from the voltage sags and spikes a starter motor can cause.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Blue Sea Systems 7601 mounted?\u003c\/strong\u003e The compact m-ACR design supports three mounting styles: surface mount, rear mount, or panel mount, allowing it to fit a range of helm or engine bay layouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much current can the 7601 relay switch?\u003c\/strong\u003e The m-ACR 7601 has a maximum switching current of 65 Amps and a contact current rating of 65 Amps, using Normally Open, Quick Connect terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the relay contacts made of on the 7601?\u003c\/strong\u003e The m-ACR uses tinned brass contacts, chosen for corrosion resistance in a marine electrical environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAt what voltage does the m-ACR isolate the battery banks?\u003c\/strong\u003e The 7601 has a minimum switching voltage of 10.8 Volts and includes a 9.5V under-voltage lockout as part of its specification, so it isolates the banks once voltage drops rather than staying combined indefinitely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does the Blue Sea Systems 7601 respond to a change in charging state?\u003c\/strong\u003e The m-ACR has a 10 second operating time, allowing it to respond to real charging conditions rather than momentary voltage fluctuations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 7601 weigh?\u003c\/strong\u003e The m-ACR 7601 weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the m-ACR 7601 be integrated into a larger electrical panel?\u003c\/strong\u003e Yes, in addition to standalone surface, rear, or panel mounting, the m-ACR is also available as a module within a Custom 360 Panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Blue Sea Systems 7601 manufactured?\u003c\/strong\u003e The m-ACR 7601 has a stated country of origin of United States.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989511778523,"sku":"BSS-7601","price":108.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7601.jpg?v=1784507227"},{"product_id":"blue-sea-systems-7610-si-acr-automatic-charging-relay-12-24v-dc-120a-dual-battery-bank-combiner","title":"Blue Sea Systems SI-ACR Automatic Charging Relay 7610, 12\/24V DC, 120 Amp","description":"\u003cp\u003eThe Blue Sea Systems SI-ACR (7610) is an Automatic Charging Relay that combines battery banks automatically while charging and isolates them automatically when discharging, so house loads never draw down the engine start battery. It operates on a 12\/24 volt auto-ranging voltage input, making it suitable for both 12V and 24V DC electrical systems, and supports high-output alternators up to 120 amperes.\u003c\/p\u003e\u003cp\u003eSensitive electronics are protected because the SI-ACR provides temporary isolation of house loads from the engine circuit during engine cranking, preventing voltage drop from affecting connected equipment. The relay uses hermetically sealed, vaporproof electrical contacts rated for 120 amps, with contacts made of stainless steel or tinned material for corrosion resistance in a marine environment. It is ignition protected, meaning it is safe for installation aboard gasoline powered boats. The unit switches automatically with a minimum switching voltage of 13 volts DC and an operating time of 10 seconds, connects via quick connect terminals (2 terminals total), and can be floor mounted or mounted without a bracket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7610\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Automatic Charging Relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12\/24 Volt DC, auto-ranging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 120 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Voltage:\u003c\/strong\u003e 24 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Switching Voltage:\u003c\/strong\u003e 13 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Time:\u003c\/strong\u003e 10 Seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Terminals:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 2880 Watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Quick Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Stainless Steel or Tinned Material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Hermetically Sealed, Vaporproof Electrical Contacts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Floor Mount or None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Ignition Protected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085076108\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems SI-ACR 7610 do?\u003c\/strong\u003e The SI-ACR (7610) automatically combines battery banks when charging and isolates them when discharging, so house loads cannot draw down the starting battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum alternator output the 7610 supports?\u003c\/strong\u003e The Blue Sea Systems SI-ACR 7610 supports high-output alternators up to 120 amperes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage systems is the 7610 compatible with?\u003c\/strong\u003e It has a 12\/24 volt auto-ranging voltage input, so the same SI-ACR 7610 works on both 12V and 24V DC marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SI-ACR safe to install on a gasoline powered boat?\u003c\/strong\u003e Yes, the 7610 is ignition protected, which means it is safe for installation aboard gasoline powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of the 7610 relay?\u003c\/strong\u003e 120 amps is the current rating of the Blue Sea Systems 7610, matching its hermetically sealed, vaporproof contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the SI-ACR protect electronics during engine cranking?\u003c\/strong\u003e During engine cranking, the 7610 temporarily isolates house loads from the engine circuit, protecting sensitive electronics from voltage drop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does it take the 7610 to switch battery banks?\u003c\/strong\u003e The operating time of the SI-ACR 7610 is 10 seconds, with a minimum switching voltage of 13 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of contacts does the 7610 use?\u003c\/strong\u003e Hermetically sealed, vaporproof electrical contacts made of stainless steel or tinned material are used in the Blue Sea Systems 7610.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the SI-ACR 7610 mounted?\u003c\/strong\u003e The 7610 can be floor mounted or installed without a mounting bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does the 7610 have?\u003c\/strong\u003e The Blue Sea Systems SI-ACR 7610 has 2 terminals using a quick connect connector type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 7610 weigh?\u003c\/strong\u003e The Blue Sea Systems SI-ACR 7610 weighs 1.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat operation mode does the SI-ACR use?\u003c\/strong\u003e The 7610 operates in automatic mode, combining and isolating battery banks without manual switching.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989512270043,"sku":"BSS-7610","price":156.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7610.jpg?v=1784507231"},{"product_id":"blue-sea-systems-7622-ml-acr-12v-dc-500a-automatic-charging-relay-with-manual-control","title":"Blue Sea Systems 7622 ML-ACR 12V DC 500A Automatic Charging Relay with Manual Control, Gray","description":"\u003cp\u003eThe Blue Sea Systems 7622 is a 12V DC, 500 Amp ML-ACR (Automatic Charging Relay) designed to automatically combine two large battery banks for charging and separate them once the engine is shut off, protecting house loads from being drawn down by the starting battery. Unlike a standard automatic-only ACR, the 7622 adds a manual control switch that lets the operator combine or isolate the battery banks with or without power present, including a LOCK OFF position for safe servicing of the electrical system.\u003c\/p\u003e\u003cp\u003eThe relay uses a Deutsch DTM connector and normally-closed, silver-alloy contacts rated for 500 amps of continuous current, with a 12 volt coil and a 12 volt minimum switching voltage. It is built to marine-grade electrical equipment and battery isolator standards and is intended for surface mounting near the battery banks it manages. The 7622 includes the ML-Series Remote Control Contura Switch (PN 2146), which provides the manual override function from a remote helm or panel location.\u003c\/p\u003e\u003cp\u003eThis ACR is suited for boats and other 12 volt DC systems running dual large battery banks where automatic charge combining plus a manual override for servicing or emergency use is required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7622\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e ML-ACR Automatic Charging Relay with Manual Control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Voltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Switching Voltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 500 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Silver Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Deutsch DTM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Automatic, Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Terminals:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Component:\u003c\/strong\u003e ML-Series Remote Control Contura Switch, PN 2146\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification Met:\u003c\/strong\u003e Marine-grade Electrical Equipment and Battery Isolator Standards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 7622 ML-ACR do?\u003c\/strong\u003e The 7622 is a 12 volt DC, 500 amp Automatic Charging Relay that automatically combines two large battery banks while charging and separates them once the engine stops, so house loads cannot draw down the starting battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes this different from a standard automatic-only ACR?\u003c\/strong\u003e The 7622 adds a manual control switch on top of the automatic function, letting you combine or isolate the battery banks with or without power present, plus a LOCK OFF position for safely servicing the electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat current rating does the 7622 support?\u003c\/strong\u003e The Blue Sea Systems 7622 is rated for 500 amps of continuous current through normally-closed, silver-alloy contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage system is the 7622 built for?\u003c\/strong\u003e This ACR is a 12 volt DC unit, with a 12 volt coil and a 12 volt minimum switching voltage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 7622 come with a control switch?\u003c\/strong\u003e Yes, the Blue Sea Systems 7622 includes the ML-Series Remote Control Contura Switch, part number 2146, which provides the manual override function.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 7622 mounted?\u003c\/strong\u003e The 7622 is a surface-mount relay intended to be installed near the battery banks it manages.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of electrical connector does the 7622 use?\u003c\/strong\u003e It uses a Deutsch DTM connector for its control wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 7622 weigh?\u003c\/strong\u003e The Blue Sea Systems 7622 weighs 2.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 7622 housing?\u003c\/strong\u003e The 7622 has a gray housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat standards is the 7622 built to?\u003c\/strong\u003e The 7622 meets marine-grade electrical equipment and battery isolator standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 7622 isolate the battery banks for servicing?\u003c\/strong\u003e Yes, the manual control switch on the 7622 has a LOCK OFF position that isolates the battery banks so the electrical system can be serviced safely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does the 7622 have?\u003c\/strong\u003e The Blue Sea Systems 7622 has 2 terminals.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989512335579,"sku":"BSS-7622","price":357.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7622.jpg?v=1784507654"},{"product_id":"blue-sea-systems-7635-m-lvd-low-voltage-disconnect-65a-12v-dc-battery-protection-with-status-light","title":"Blue Sea Systems 7635 m-LVD Low Voltage Disconnect, 65 Amp 12V DC","description":"\u003cp\u003eThe Blue Sea Systems 7635 m-LVD Low Voltage Disconnect is a 65 Amp continuous rated device built for 12V DC marine electrical systems. It automatically disconnects a load bank from the battery bank when voltage drops to a low state, protecting the battery from over-discharge, and can also be operated manually via its off setting. A status light built into both the m-LVD unit and its companion Remote Control Switch gives a clear visual warning of the low voltage state before the disconnect occurs, so the operator has advance notice before power is cut.\u003c\/p\u003e\u003cp\u003eThe housing is constructed of plastic with metal contacts and carries an IP65 rating for protection against dust and water spray, making it suitable for the harsh, damp environments typical of a boat's electrical compartment. It is a panel mount device with a 1-way circuit configuration and connects via clamp or plug-in terminals. The unit is designed for 12V DC systems commonly found on marine vessels, RVs, and off-grid solar installations, and is intended for automatic or off operation modes controlled remotely.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7635\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e m-LVD Low Voltage Disconnect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 65 Amps continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Automatically, Off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 780 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Remote Control Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Method:\u003c\/strong\u003e Remote\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 1-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Clamp or plug in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7.05 x 6.78 x 2.7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.77 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Protection Rating:\u003c\/strong\u003e IP65\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Temperature Rating:\u003c\/strong\u003e 20 degrees Celsius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper Temperature Rating:\u003c\/strong\u003e 60 degrees Celsius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Vehicle Type:\u003c\/strong\u003e Marine vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 7635 m-LVD do?\u003c\/strong\u003e It automatically disconnects a load bank from the battery bank when voltage drops to a low state, protecting the battery from over-discharge, and can also be switched off manually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of the 7635 m-LVD?\u003c\/strong\u003e The unit is rated for 65 Amps continuous at 780 watts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage system is the Blue Sea 7635 designed for?\u003c\/strong\u003e It is built for 12 Volt DC systems, the type found on most marine vessels, RVs, and off-grid solar setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 7635 give any warning before it disconnects power?\u003c\/strong\u003e Yes, a status light built into both the m-LVD unit and its Remote Control Switch visually warns of the low voltage state before the disconnect actually happens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the m-LVD Low Voltage Disconnect?\u003c\/strong\u003e The Blue Sea Systems 7635 measures 7.05 x 6.78 x 2.7 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 7635 weigh?\u003c\/strong\u003e It weighs 0.77 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 7635 housing made of?\u003c\/strong\u003e The housing is plastic with metal contacts, rated IP65 for protection against dust and water spray in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 7635 mounted?\u003c\/strong\u003e It is a panel mount device with a 1-way circuit and a single position, connecting via clamp or plug-in terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the low voltage disconnect be operated manually?\u003c\/strong\u003e Yes, the 7635 supports both automatic operation and a manual off setting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range is the 7635 rated for?\u003c\/strong\u003e Blue Sea Systems rates the unit from 20 degrees Celsius to 60 degrees Celsius.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Blue Sea 7635 m-LVD?\u003c\/strong\u003e The unit is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 7635 compatible with RV and solar systems in addition to boats?\u003c\/strong\u003e Yes, the m-LVD 7635 is designed for 12V DC systems used in marine, RV, and off-grid solar applications.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989515284699,"sku":"BSS-7635","price":124.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7635.jpg?v=1784507658"},{"product_id":"blue-sea-systems-7650-add-a-battery-kit-120a-dual-circuit-battery-management-system-with-automatic-charging-relay-for-inboards-and-larger-outboards","title":"Blue Sea Systems 7650 Add-A-Battery Kit, 120 Amp Dual Circuit System with Automatic Charging Relay","description":"\u003cp\u003eThe Blue Sea Systems 7650 Add-A-Battery Kit is a complete battery management system for boats running two battery banks. Rated for a continuous 120 Amps, it is built for inboards and larger outboards and simplifies switching and charging without requiring external regulators or isolators. At the core of the kit is a Dual Circuit Plus battery switch that manages the starter and house banks independently while still allowing simple single ON and OFF operation for everyday use. An integrated Automatic Charging Relay senses charging voltage and automatically combines both batteries during engine operation so each bank receives a charge, then isolates the batteries again once charging stops and voltage drops, helping protect sensitive electronics and preserve starting power. For situations where one battery bank is discharged, the kit includes an emergency parallel combine function that links both banks together to support engine starting. Electrical connections use stud-type terminals with copper contacts, and the current-carrying studs are tin plated to resist corrosion in harsh marine environments, supporting long-term reliable conductivity. The 7650 is designed to reduce wiring complexity and switching errors compared to running two separate battery banks with manual switches.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7650\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Marine Battery Charger Accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 120 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1440 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Stud\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Temperature Rating:\u003c\/strong\u003e 55 Degrees Celsius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper Temperature Rating:\u003c\/strong\u003e 85 Degrees Celsius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification Met:\u003c\/strong\u003e ETL, IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085076504\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.36 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 7650 Add-A-Battery Kit do?\u003c\/strong\u003e The Blue Sea Systems 7650 is a 120 Amp dual circuit battery management system that lets a boat charge and manage two battery banks with a single Dual Circuit Plus switch and an integrated Automatic Charging Relay.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 7650 kit include a battery isolator or external regulator?\u003c\/strong\u003e No separate external regulator or isolator is needed. The 7650 kit's built-in Automatic Charging Relay combines the batteries during charging and isolates them at rest, handling that function internally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of the Blue Sea Systems 7650?\u003c\/strong\u003e The 7650 Add-A-Battery Kit carries a continuous current rating of 120 Amps (1440 watts), suitable for inboards and larger outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the switch in the 7650 kit work day to day?\u003c\/strong\u003e The kit's Dual Circuit Plus battery switch manages the starter and house banks independently but is operated with a single ON and OFF control, reducing the switching errors that come with running two separate manual switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens if one battery bank is dead and I need to start the engine?\u003c\/strong\u003e The 7650 includes an emergency parallel combine function that links both battery banks together, allowing the healthy bank to help start the engine if the other bank is discharged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the terminals made of on the 7650 kit?\u003c\/strong\u003e The 7650 Add-A-Battery Kit uses stud-type terminals with copper contacts, and the current-carrying studs are tin plated to resist corrosion in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 7650 weigh?\u003c\/strong\u003e The Blue Sea Systems 7650 Add-A-Battery Kit weighs 2.36 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range is the 7650 rated for?\u003c\/strong\u003e The 7650 is rated from 55 degrees Celsius on the low end to 85 degrees Celsius on the high end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 7650 kit certified to any standards?\u003c\/strong\u003e Yes, the Blue Sea Systems 7650 meets ETL and IP54 specifications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 7650 kit automatic or does it require manual battery combining?\u003c\/strong\u003e Operation is automatic: the Automatic Charging Relay in the 7650 senses charging voltage and combines or isolates the two battery banks on its own, with manual combine only needed for the emergency parallel function.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Blue Sea Systems 7650?\u003c\/strong\u003e The UPC for the Blue Sea Systems 7650 Add-A-Battery Kit is 632085076504.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 7650 mounted?\u003c\/strong\u003e The Blue Sea Systems 7650 uses a panel mount configuration.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989517480155,"sku":"BSS-7650","price":242.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7650.jpg?v=1784507243"},{"product_id":"blue-sea-systems-9003e-e-series-battery-switch-single-circuit-on-off-350a-48v-dc","title":"Blue Sea Systems 9003E e-Series Battery Switch, Single Circuit On-Off, 350A, 48V DC, Red","description":"\u003cp\u003eThe Blue Sea Systems 9003E e-Series Battery Switch is a single circuit ON-OFF rotary switch built to control power from one battery bank on a boat's electrical system. Turning the red textured knob connects or disconnects the circuit, letting you isolate the battery bank for maintenance, winter storage, or general safety when the boat is not in use. The textured knob and face are designed so the switch can be operated by feel in low light conditions.\u003c\/p\u003e\u003cp\u003eConstruction is a durable plastic housing rated IP66 for protection against dust and heavy seas or wash-down water, and the switch carries a 350 amp continuous current rating at 48 volts DC. Terminal studs are tinned copper to resist corrosion in a marine environment and are designed to accept multiple cable connections for secure, low resistance contact. The switch supports both surface mounting and rear panel mounting, giving installers flexibility in tight helm or engine room spaces.\u003c\/p\u003e\u003cp\u003eThis is a single circuit switch only, controlling one isolated battery bank; it does not combine circuits and does not include an alternator field disconnect. Overall dimensions are 2.9 x 6.38 x 8.63 inches and the switch weighs 1.3 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9003E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Battery Switch 'E' On-Off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rotary, Single Circuit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e ON-OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 350 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 48 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Tinned Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount or Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.9 x 6.38 x 8.63 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 9003E battery switch do?\u003c\/strong\u003e The 9003E is a single circuit ON-OFF rotary switch that turns one battery bank on or off, letting you isolate that circuit for maintenance or storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current and voltage rating of the 9003E?\u003c\/strong\u003e The 9003E is rated for 350 amps at 48 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 9003E control two separate battery banks?\u003c\/strong\u003e No. The 9003E is a single circuit switch that controls only one isolated battery bank; it does not combine circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 9003E include an alternator field disconnect?\u003c\/strong\u003e No, this model of the Blue Sea Systems 9003E switch does not include an alternator field disconnect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 9003E battery switch mounted?\u003c\/strong\u003e The 9003E supports both surface mounting and rear panel mounting, allowing flexible placement in tight installation spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 9003E switch made of?\u003c\/strong\u003e The housing is plastic, and the terminal studs are tinned copper for corrosion resistance and secure cable connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the 9003E?\u003c\/strong\u003e The 9003E measures 2.9 x 6.38 x 8.63 inches and weighs 1.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 9003E rated for water or dust exposure?\u003c\/strong\u003e Yes, the 9003E carries an IP66 ingress protection rating, suitable for wet marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 9003E battery switch?\u003c\/strong\u003e The 9003E is red with a textured knob and face designed to be operated by feel in low light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the 9003E?\u003c\/strong\u003e Blue Sea Systems backs the 9003E with a limited lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminal connections does the 9003E support?\u003c\/strong\u003e The tinned copper terminal studs on the 9003E are designed to accept multiple cable connections for secure, low resistance contact.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989523083483,"sku":"BSS-9003E","price":52.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/bss-9003e_lg__92604.1558139646.500.750.jpg?v=1785329072"},{"product_id":"blue-sea-systems-9001e-e-series-battery-switch-4-position-selector-325a-32v-dc-red","title":"Blue Sea Systems 9001E e-Series Battery Switch, 4 Position Selector, 32V DC 325A, Red","description":"\u003cp\u003eThe Blue Sea Systems 9001E is a 4 position selector battery switch built for boats that need flexible control over multiple battery banks. It lets you select between battery banks individually or combine them to supply power to onboard systems, making it a common choice for dual battery bank setups where switching between house and start batteries (or combining them) is required. The compact design fits tight installation spaces, and the switch supports multiple mounting options, including surface mounting or rear panel mounting, so it can be installed to suit the available space around the helm or engine compartment.\u003c\/p\u003e\u003cp\u003eThe 9001E is ignition protected, meaning it is rated for mounting in the engine room of gasoline powered boats. It uses one piece copper studs measuring 7\/8 inch long that accept multiple cables, helping maintain secure, low resistance electrical connections at the switch. The switch face has tactile textures so the operator can identify and operate the correct position by feel in low light or no light conditions, an important detail for a component often mounted out of direct sightline. The housing is red plastic, and the unit is rated for 32 volts DC at up to 325 amps. This model does not include an alternator field disconnect (AFD) feature.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9001E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Selector 4 Position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 325 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 32 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e One piece copper studs, 7\/8 inch long, accept multiple cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount, Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.85 x 3.85 x 3.1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Ignition Protected (suitable for gasoline powered boat engine rooms)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator Field Disconnect:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Protection Rating:\u003c\/strong\u003e IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eIgnition protected for installation in the engine room of gasoline powered boats. Suited to boats with two battery banks that need selector or combine control.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 4 position selector on the Blue Sea Systems 9001E do?\u003c\/strong\u003e The 9001E is a 4 position selector switch that lets you choose between two battery banks individually, combine them, or turn the circuit off, giving flexible control over which battery bank supplies power to onboard systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 9001E safe to mount in a gasoline engine room?\u003c\/strong\u003e Yes, the 9001E is ignition protected, which means it is rated for mounting in the engine room of gasoline powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 9001E include an alternator field disconnect (AFD)?\u003c\/strong\u003e No, the Blue Sea Systems 9001E does not include an alternator field disconnect feature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and current is the 9001E rated for?\u003c\/strong\u003e The 9001E is rated for 32 volts DC and up to 325 amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the terminal studs on the 9001E made of, and what size are they?\u003c\/strong\u003e The 9001E uses one piece copper studs that are 7\/8 inch long and accept multiple cables for secure, low resistance connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the Blue Sea Systems 9001E?\u003c\/strong\u003e The 9001E measures 3.85 x 3.85 x 3.1 inches and weighs 1.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 9001E be mounted on the surface of a panel or from behind it?\u003c\/strong\u003e Yes, the 9001E supports multiple mounting options and can be installed on the surface or on the rear of a panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the correct switch position identified in low light?\u003c\/strong\u003e The 9001E has tactile textures on its face that let the operator identify and operate the correct switch position by feel in low or no light conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and material is the 9001E housing?\u003c\/strong\u003e The Blue Sea Systems 9001E has a red plastic housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Blue Sea Systems 9001E and the 9002E?\u003c\/strong\u003e Both are 4 position selector switches, but the 9002E includes AFD (alternator field disconnect) terminals while the 9001E does not.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Blue Sea Systems 9001E battery switch?\u003c\/strong\u003e The 9001E is backed by a limited lifetime warranty from Blue Sea Systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat environmental protection rating does the 9001E carry?\u003c\/strong\u003e The Blue Sea Systems 9001E carries an IP66 protection rating.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989523149019,"sku":"BSS-9001E","price":56.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/9001e__31052.1558139473.500.750.jpg?v=1785329072"},{"product_id":"blue-sea-systems-9002e-e-series-4-position-battery-switch-selector-with-afd-325a-32v-dc-red","title":"Blue Sea Systems 9002E 4-Position Battery Switch with Alternator Field Disconnect (AFD), 32V DC, 325A","description":"\u003cp\u003eThe Blue Sea Systems 9002E is a 4-position battery selector switch built to manage two isolated battery banks aboard a boat, with a built-in Alternator Field Disconnect (AFD) to protect the alternator if the switch is turned to OFF while the engine is running. The 4-position rotary dial lets the operator select Battery 1, Battery 2, Both, or OFF, so isolated banks can be run independently or combined to power all loads as needed. The switch is ignition protected, so it can be mounted in the engine room of gasoline powered boats as well as in dry electrical panel spaces.\u003c\/p\u003e\u003cp\u003eConstruction uses a durable plastic housing with a rotary knob that has a tactile texture, allowing the operator to confirm switch position by feel in low light or no-light conditions. The terminal studs are one-piece tin-plated copper, long enough to accept multiple cables while providing the torque needed for a secure, low-resistance connection. The switch offers multiple mounting options and can be installed on the surface of a panel or from the rear of a panel, with a 32 mm mounting hole. The housing carries an IP66 ingress protection rating for resistance to dust and heavy water spray, making it suitable for engine room and helm installations where moisture exposure is a concern.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9002E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Configuration:\u003c\/strong\u003e 4-Position Selector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator Field Disconnect (AFD):\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 32 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 325 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rotary\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount (Surface or Rear of Panel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 32 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3.85 x 3.85 x 3.1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Studs:\u003c\/strong\u003e One-piece tin-plated copper, 7\/8 inch long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protected:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085900250\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the AFD on the Blue Sea Systems 9002E do?\u003c\/strong\u003e The Alternator Field Disconnect (AFD) on the 9002E protects the alternator if the switch is turned to the OFF position while the engine is running, preventing damage that can occur when an alternator loses its battery connection under load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many battery banks can the 9002E manage?\u003c\/strong\u003e Two isolated battery banks can be managed with the 9002E, a 4-position selector switch that lets the operator choose Battery 1, Battery 2, Both, or OFF.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Blue Sea Systems 9002E be mounted in a gasoline engine room?\u003c\/strong\u003e Yes, the 9002E is ignition protected, so it is rated for mounting in the engine room of gasoline powered boats as well as in a standard electrical panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the mounting options for this switch?\u003c\/strong\u003e The 9002E can be installed on the surface of a panel or mounted through the rear of a panel, using a 32 mm mounting hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size cables fit the terminal studs on the 9002E?\u003c\/strong\u003e The 9002E uses one-piece tin-plated copper terminal studs that are 7\/8 inch long, long enough to accept multiple cables while still allowing the torque needed for a secure, low-resistance connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 9002E waterproof?\u003c\/strong\u003e The 9002E carries an IP66 ingress protection rating, meaning it is protected against dust ingress and powerful water jets, which suits engine room and helm mounting locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Blue Sea Systems 9002E and the 9001E?\u003c\/strong\u003e Both the 9002E and 9001E are 4-position selector switches, but the 9002E includes the Alternator Field Disconnect (AFD) feature while the 9001E does not.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and current is the 9002E rated for?\u003c\/strong\u003e The 9002E is rated for 32 Volts DC at 325 Amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the operator know which position the 9002E switch is in without looking?\u003c\/strong\u003e The rotary knob on the 9002E has a tactile texture on its face, letting the operator confirm the selected position by feel in low light or no-light conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Blue Sea Systems 9002E made of?\u003c\/strong\u003e The housing of the 9002E is plastic, with copper contacts and one-piece tin-plated copper terminal studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 9002E battery switch weigh?\u003c\/strong\u003e The 9002E weighs 1.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the physical dimensions of the 9002E?\u003c\/strong\u003e The 9002E measures 3.85 x 3.85 x 3.1 inches.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989523214555,"sku":"BSS-9002E","price":75.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/bss-9002e_lg__45326.1558172166.500.750.jpg?v=1785329072"},{"product_id":"blue-sea-systems-9012-solenoid-switch-l-series-250a-12-24v-dc-ignition-protected-battery-solenoid-beige","title":"Blue Sea Systems 9012 L-Series Solenoid Switch, 12-24V Ignition Protected","description":"\u003cp\u003eThe Blue Sea Systems 9012 is a 12-24V L-Series solenoid switch built for marine electrical systems, providing electronic on-off switching for circuits where a manual battery disconnect is already located elsewhere in the system. Unlike a remote battery switch, the 9012 solenoid has no manual control lever of its own; it is designed to be actuated electrically as part of a larger switching setup, making it a common choice for engine start circuits, battery isolation, and other high-current applications where a compact, panel-mountable switching device is needed.\u003c\/p\u003e\u003cp\u003eThe 9012 is ignition protected, meeting the safety standards required for use in engine compartments and other areas where spark-producing devices must be certified against igniting surrounding fuel vapors. It operates as a 1-way, normally open, electromechanical on-off switch with two positions and a crimp connector type for wiring. The housing is constructed of plastic with stainless steel contact material, and the switch carries an IP54 rating for protection against dust and splashing water, suiting it to the marine environment. Its compact panel-mount design and moderate current draw make it easy to integrate into existing 12-24V DC electrical panels aboard boats and other vessels.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9012\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Solenoid Switch 250A 12-24V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Battery Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12-24 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Ignition Protected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e ON-OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 0.13 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Crimp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Electromechanical On-off Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 1-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 10800 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7 x 4 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085090128\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Blue Sea Systems 9012 solenoid switch used for?\u003c\/strong\u003e The 9012 is a 12-24V L-Series solenoid switch used to electronically switch a circuit on and off, typically as part of a battery isolation or engine start circuit where a manual disconnect already exists elsewhere in the system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 9012 solenoid switch ignition protected?\u003c\/strong\u003e Yes, the Blue Sea Systems 9012 is ignition protected, meaning it is rated for safe use in engine compartments and other areas where spark-producing electrical devices must be certified against igniting fuel vapors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 9012 solenoid switch operate at?\u003c\/strong\u003e The Blue Sea Systems 9012 operates at 12-24 Volts DC, making it compatible with both standard 12V and 24V marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between a solenoid and a remote battery switch?\u003c\/strong\u003e A solenoid, like the Blue Sea Systems 9012, is an electronic switch with no manual control, intended for circuits where a manual battery disconnect is already provided elsewhere. A remote battery switch, by contrast, is a solenoid or relay paired with a manual control switch that allows switching if the control circuit is compromised or for service lockout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 9012 solenoid switch?\u003c\/strong\u003e The Blue Sea Systems 9012 measures 7 x 4 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 9012 solenoid switch weigh?\u003c\/strong\u003e The Blue Sea Systems 9012 weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 9012 solenoid switch made of?\u003c\/strong\u003e The housing of the Blue Sea Systems 9012 is made of plastic, with stainless steel contact material for the switching contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 9012 solenoid switch water resistant?\u003c\/strong\u003e The Blue Sea Systems 9012 carries an IP54 rating, providing protection against dust ingress and splashing water, which suits it to the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 9012 solenoid switch wired?\u003c\/strong\u003e The Blue Sea Systems 9012 uses a crimp connector type for wiring and is configured as a 1-way, normally open circuit with 2 positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 9012 solenoid switch be panel mounted?\u003c\/strong\u003e Yes, the Blue Sea Systems 9012 is designed as a panel-mount switch, allowing it to be installed directly into a switch panel or electrical enclosure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat current rating does the 9012 solenoid switch have?\u003c\/strong\u003e The Blue Sea Systems 9012 has a current rating of 0.13 Amps for its switching contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 9012 solenoid switch have manual on\/off control?\u003c\/strong\u003e No, the Blue Sea Systems 9012 is a solenoid-type switch with no manual control lever; it is electronically actuated and intended for use where a manual disconnect is already present elsewhere in the circuit.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989523378395,"sku":"BSS-9012","price":272.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/9012.jpg?v=1784507721"},{"product_id":"blue-sea-systems-7649-mini-add-a-battery-kit-65a-dual-circuit-battery-management-system-for-small-boats","title":"Blue Sea Systems 7649 Mini Add-A-Battery Kit, 65A Dual Circuit Battery Management System","description":"\u003cp\u003eThe Blue Sea Systems 7649 Mini Add-A-Battery Kit is a complete small boat battery management system that lets boaters charge two batteries at or away from the dock. Built for alternators up to 65 A, the kit pairs an m-Series Dual Circuit Plus Battery Switch 6011 with a BatteryLink Charger, giving small boats and tight helm spaces a compact, space saving solution for managing starter and house battery banks. The Mini Dual Circuit Plus switch controls the starter and house banks independently while still allowing single switch control of the system, so two battery installations stay simple to wire and operate. An integrated Automatic Charging Relay senses charge voltage and automatically combines the batteries during charging so both banks receive power at the same time; when the engine shuts off and voltage drops, the relay isolates the banks again to help prevent unintended discharge of the starting battery. An emergency parallel\/combine function is built in as well, so the batteries can be linked together to assist with engine starting if one battery is discharged. The kit uses marine rated components throughout, including tin plated copper studs that resist corrosion in harsh onboard environments, for dependable performance in demanding boating conditions. Its compact footprint is designed for small boats and tight installations, simplifying wiring for two bank systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7649\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Battery Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Alternator Rating:\u003c\/strong\u003e 65 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Current Rating:\u003c\/strong\u003e 65 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e m-Series Dual Circuit Plus Battery Switch 6011 and BatteryLink Charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Material:\u003c\/strong\u003e Tin plated copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 11.75 x 7.63 x 3.2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085076498\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 7649 Mini Add-A-Battery Kit include?\u003c\/strong\u003e The kit includes an m-Series Dual Circuit Plus Battery Switch 6011 and a BatteryLink Charger, combined into a complete small boat battery management system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat alternator size does the 7649 Add-A-Battery Kit support?\u003c\/strong\u003e The 7649 is designed for alternators up to 65 A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Automatic Charging Relay in the 7649 kit work?\u003c\/strong\u003e It senses charge voltage and automatically combines both batteries during charging so they charge at the same time, then isolates the banks again when voltage drops after the engine is off, helping prevent unintended discharge of the starting battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the batteries be combined for emergency starting?\u003c\/strong\u003e Yes, the 7649 kit includes an emergency parallel\/combine function that links the batteries together to assist with engine starting if one battery is discharged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Mini Dual Circuit Plus switch let me control each battery bank separately?\u003c\/strong\u003e Yes, the switch controls the starter and house banks independently while still supporting convenient single switch control for compact two battery installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 7649 kit?\u003c\/strong\u003e The Blue Sea Systems 7649 Mini Add-A-Battery Kit measures 11.75 x 7.63 x 3.2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 7649 Add-A-Battery Kit weigh?\u003c\/strong\u003e It weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the switch studs made of?\u003c\/strong\u003e The 7649 kit uses tin plated copper studs, which resist corrosion in harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 7649 kit suited for small boats with tight helm space?\u003c\/strong\u003e Yes, its compact, space saving footprint is designed to fit small boats and tight helm spaces while simplifying wiring for two bank battery systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Blue Sea Systems 7649 kit?\u003c\/strong\u003e The UPC is 632085076498.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat continuous current rating do the kit's components carry?\u003c\/strong\u003e The 7649 kit's marine rated components carry a continuous rating of 65 A.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989574103259,"sku":"BSS-7649","price":177.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7649.jpg?v=1784507239"},{"product_id":"blue-sea-systems-7700-ml-series-remote-battery-switch-solenoid-with-manual-control-500a-continuous-12v-dc","title":"Blue Sea Systems 7700 ML-Series Remote Battery Switch, 12V, 500A Continuous","description":"\u003cp\u003eThe Blue Sea Systems 7700 is an ML-Series Remote Battery Switch with Manual Control, designed to connect and disconnect a boat's battery bank from a remote location while retaining a manual back-up override at the switch itself. It is built for 12VDC systems and is rated for 500 amps continuous and 700 amps intermittent load, making it suitable for isolating house or engine battery banks on boats that need remote on\/off control without running heavy cable to a helm-mounted switch. The unit's current-carrying components use a silver alloy contact material for reliable, long-term conductivity under repeated switching cycles.\u003c\/p\u003e\u003cp\u003eControl is provided through an integrated rocker switch with indicator lights, so the operator can see switch status at a glance, and the manual back-up allows the battery connection to be operated directly at the unit if remote control power is lost. The compact housing measures 5.5 inches high by 3.75 inches wide by 2 inches deep, allowing installation in tight battery compartments, and the complete package includes the switch unit and an instruction manual.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7700\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e ML-Series Remote Battery Switch with Manual Control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Amperage:\u003c\/strong\u003e 500 amps continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Amperage:\u003c\/strong\u003e 700 amps intermittent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e Remote with manual back-up control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Feature:\u003c\/strong\u003e Rocker switch with indicators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Silver alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5.5 inches H x 3.75 inches W x 2 inches D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Switch unit and instruction manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Blue Sea Systems 7700 used for?\u003c\/strong\u003e The 7700 is an ML-Series Remote Battery Switch that connects or disconnects a 12VDC battery bank from a remote location, with a manual back-up control at the unit itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and amperage is the 7700 rated for?\u003c\/strong\u003e It is rated for 12VDC systems at 500 amps continuous and 700 amps intermittent, part number 7700.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Blue Sea Systems 7700 be operated manually?\u003c\/strong\u003e Yes, the 7700 includes a manual back-up control at the switch body in addition to its remote control function.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 7700 battery switch?\u003c\/strong\u003e The unit measures 5.5 inches high by 3.75 inches wide by 2 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 7700 weigh?\u003c\/strong\u003e The 7700 weighs 2.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the switch contacts made of?\u003c\/strong\u003e Silver alloy contacts are used in the 7700 for durable, reliable conductivity under repeated switching.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 7700 include a status indicator?\u003c\/strong\u003e Yes, it has an integrated rocker switch with indicator lights showing the connection status of the 7700.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the 7700?\u003c\/strong\u003e The package includes the ML-Series Remote Battery Switch unit itself and an instruction manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 7700 covered by a warranty?\u003c\/strong\u003e The 7700 carries a 1 year limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 7700 suitable for isolating a house battery bank?\u003c\/strong\u003e Its 500 amp continuous, 700 amp intermittent rating at 12VDC makes the 7700 suitable for remotely isolating house or engine battery banks on a boat.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989574136027,"sku":"BSS-7700","price":277.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7700.jpg?v=1784507247"},{"product_id":"blue-sea-systems-7611-automatic-charging-relay-acr-120a-12-24v-dc-batterylink","title":"Blue Sea Systems 7611 Automatic Charging Relay, 120A Continuous, 12\/24V DC Auto-Ranging","description":"\u003cp\u003eThe Blue Sea Systems 7611 is an Automatic Charging Relay (ACR) that combines a starting battery and a house battery bank whenever a charge source is present, then automatically isolates them once charging stops or a load exceeds the charge input. This lets a single alternator, shore charger, or solar controller keep multiple battery banks topped up without manual switching, while protecting the engine-start battery from being drained by house loads. The 7611 is rated for a 12\/24V DC auto-ranging voltage input, so the same relay works correctly on either a 12 volt or a 24 volt system without configuration. It uses an electromechanical, quick-connect contact design with silver contacts for reliable, low-resistance switching, and operation is fully automatic based on sensed voltage at each battery bank. An integrated LED indicates the ACR status at a glance, and the housing includes side and bottom knockouts for cable connections, simplifying installation in tight helm, engine bay, or battery compartment spaces. Built for continuous marine duty, the relay carries a 120 amp continuous current rating with a 210 amp intermittent rating, giving it headroom for charging surges and simultaneous loads. The 7611 is finished in black and yellow for easy identification among other electrical components onboard. It is designed as a drop-in battery combiner for boats running dual-battery or house\/start battery configurations that need automatic, hands-off combining logic.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7611\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Current Rating:\u003c\/strong\u003e 120 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Current Rating:\u003c\/strong\u003e 210 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Input:\u003c\/strong\u003e 12\/24 Volt DC, auto-ranging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1440 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Quick Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Electromechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface mount or panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Voltage:\u003c\/strong\u003e 24 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Resistance:\u003c\/strong\u003e 100 Milliohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Switching Voltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Terminals:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black, Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085076115\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 7611 ACR do?\u003c\/strong\u003e It automatically combines a starting battery and a house battery bank whenever a charge source is present and connected loads do not exceed the charge input, then isolates the banks again once charging stops, so the 7611 keeps both banks charged without a manual battery switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 7611 work on a 24 volt boat as well as a 12 volt boat?\u003c\/strong\u003e Yes. The Blue Sea Systems 7611 has a 12\/24V DC auto-ranging voltage input, so it senses and operates correctly on either a 12 volt or a 24 volt system without any manual configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the continuous current rating of the 7611?\u003c\/strong\u003e 120 amps continuous, with a 210 amp intermittent rating, which is the current-handling capacity of the Blue Sea Systems 7611 Automatic Charging Relay.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 7611 weigh?\u003c\/strong\u003e The Blue Sea Systems 7611 weighs 1.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 7611 a manual switch or does it operate automatically?\u003c\/strong\u003e The 7611 operates automatically. Its operation mode senses battery voltage and charge presence and closes or opens the relay contacts without any manual input from the operator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of contacts does the 7611 use?\u003c\/strong\u003e The Blue Sea Systems 7611 uses electromechanical contacts made of silver, connected through a quick-connect terminal design with 2 terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if the 7611 is actively combining the batteries?\u003c\/strong\u003e The 7611 has an integrated LED that indicates ACR status, giving a visual signal of when the relay is combining the battery banks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are cables connected to the 7611, and where does it mount?\u003c\/strong\u003e The Blue Sea Systems 7611 has side and bottom knockouts for cable connections and can be installed as a surface mount or panel mount unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 7611 housing?\u003c\/strong\u003e The 7611 is finished in black and yellow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the wattage rating of the 7611?\u003c\/strong\u003e 1440 watts, which corresponds to the Blue Sea Systems 7611's 120 amp continuous current rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum switching voltage for the 7611?\u003c\/strong\u003e 12 Volts DC is the minimum switching voltage for the Blue Sea Systems 7611 Automatic Charging Relay.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989574201563,"sku":"BSS-7611","price":107.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7611.jpg?v=1784507650"},{"product_id":"perko-8503dp-battery-selector-switch-with-alternator-field-disconnect-250a-marine-battery-switch-6-50v-dc","title":"Perko 8503DP Medium Duty Battery Selector Switch with Alternator Field Disconnect","description":"\u003cp\u003eThe Perko 8503DP is a medium duty battery selector switch built for boats running non unitized alternators, where an alternator field disconnect is needed to protect the charging system. The switch's alternator field disconnect feature interrupts the field current if the switch is turned OFF while the engine is still running, reducing the risk of damage to the alternator. The body is molded polycarbonate with brass terminals for corrosion resistance and long service life at the helm or in the engine compartment.\u003c\/p\u003e\u003cp\u003eOperation is a rotary, two position (2-way) design rated for 6 to 50 volt marine electrical systems and up to 250 amps. The knob uses a 90 degree rotation feature so the operator can feel the switch's position by touch alone, which matters in low light or in an emergency shutoff situation, and the classic knob shape makes it easy to grip and turn even with wet or gloved hands. The switch is ignition protected and carries an IP54 ingress protection rating. An optional spacer ring, sold separately under part number 0462DP0RED, allows the use of larger cables with this switch. The 8503DP is a surface mount switch intended for permanent panel or bulkhead installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8503DP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Battery Selector Switch with Alternator Field Disconnect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 6 to 50 Volts (Marine Electrical Systems)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 250 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 2-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Manual, 90 degree rotation knob\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e Screw Terminal (Marine)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protected:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.63 x 5.25 x 5.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Accessory:\u003c\/strong\u003e Spacer ring, part number 0462DP0RED, for use with larger cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 066510878508, 085226559884, 012304402350\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 6 to 50 volt marine electrical systems using non unitized alternators that require a field disconnect when the battery switch is turned OFF with the engine running.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the alternator field disconnect on the Perko 8503DP do?\u003c\/strong\u003e It interrupts the alternator's field current if the 8503DP switch is turned OFF while the engine is still running, which reduces the possibility of damage to a non unitized alternator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko 8503DP ignition protected?\u003c\/strong\u003e Yes, the 8503DP is ignition protected, meaning it is designed to reduce the risk of igniting flammable vapors in the engine compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage range does this battery switch support?\u003c\/strong\u003e The 8503DP is rated for use on 6 to 50 volt marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many amps is the Perko 8503DP rated for?\u003c\/strong\u003e It carries a 250 amp current rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials is the 8503DP made from?\u003c\/strong\u003e The switch has a polycarbonate body with brass terminals and brass contacts for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Perko 8503DP battery switch?\u003c\/strong\u003e The 8503DP measures 2.63 x 5.25 x 5.25 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Perko 8503DP weigh?\u003c\/strong\u003e The 8503DP weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Perko 8503DP mounted?\u003c\/strong\u003e It is a surface mount switch designed for panel or bulkhead installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Perko 8503DP and a standard selector switch like the 8501?\u003c\/strong\u003e The 8503DP (Fig. 8503) adds an alternator field disconnect function that the standard Fig. 8501 selector switch does not have; the 8503DP is intended for use with non unitized alternators that require this protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 8503DP accept larger battery cables?\u003c\/strong\u003e Yes, an optional spacer ring, part number 0462DP0RED, is available separately and allows the 8503DP to accommodate larger cables.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the ingress protection rating of the Perko 8503DP?\u003c\/strong\u003e The 8503DP carries an IP54 ingress protection rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many switch positions does the 8503DP have?\u003c\/strong\u003e The 8503DP is a 2-way, two position rotary switch that lets the operator feel the switch position through a 90 degree rotation knob, useful in low light.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991122424027,"sku":"PKO-8503DP","price":92.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-8503DP_lg__72204.1558118398.500.750.jpg?v=1785189063"},{"product_id":"perko-8501dp-battery-selector-switch-250a-marine-dual-battery-switch-for-12-24-32v-systems-ignition-protected","title":"Perko 8501DP Battery Selector Switch, 250 Amp Continuous, 12\/24\/32 Volt Marine","description":"\u003cp\u003eThe Perko 8501DP Battery Selector Switch lets boat owners choose between two or more batteries for starting, charging, or running both batteries in parallel. It is designed for use with 12, 24, and 32 volt marine electrical systems under 50 volts, making it suitable for a wide range of single-engine boats. For dual-engine systems, two switches are used, one per engine.\u003c\/p\u003e\u003cp\u003eThe switch offers a four-position OFF-NONE-ON-ON operation mode, giving the operator clear control over which battery bank is active at any time. It is rated for 250 amps continuous and 360 amps intermittent, covering the demands of typical marine electrical loads including starting and house circuits. The switch is ignition protected, so it is built to the standards required for installation in the engine compartments of gasoline powered boats. When used with non-unitized alternators, the switch interrupts the field current if turned OFF while the engine is running, reducing the risk of alternator damage.\u003c\/p\u003e\u003cp\u003eHoused in red plastic with a rotary knob actuator, the switch mounts to a panel and connects via clamp-style terminals sized to accept marine cable. Overall dimensions are 5-1\/2 inches in diameter by 2-5\/8 inches deep.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8501DP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e OFF-NONE-ON-ON\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 250 Amps continuous, 360 Amps intermittent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12, 24, and 32 Volt systems (under 50 volts)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Ignition protected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rotary\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal \/ Connector Type:\u003c\/strong\u003e Clamp, marine terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic housing, alloy steel contacts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5-1\/2 inches diameter x 2-5\/8 inches depth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.85 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 8501DP used for?\u003c\/strong\u003e The Perko 8501DP is a battery selector switch used to choose between two or more batteries on a boat for starting, charging, or running both batteries together in parallel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage systems does the 8501DP support?\u003c\/strong\u003e It is built for 12, 24, and 32 volt marine electrical systems, and is rated for use on systems under 50 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many amps can the 8501DP handle?\u003c\/strong\u003e 250 amps continuous and 360 amps intermittent, which covers typical starting and house circuit loads on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko 8501DP safe to install in a gasoline engine room?\u003c\/strong\u003e Yes, the 8501DP is ignition protected, meaning it meets the standard required for installation in the engine rooms of gasoline powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need one switch or two for a dual-engine boat?\u003c\/strong\u003e For dual-engine systems, two 8501DP switches are used, one per engine, while a single switch covers a single-engine boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens if I turn the 8501DP off while the engine is running?\u003c\/strong\u003e When used with non-unitized alternators, turning the 8501DP to OFF while the engine is running interrupts the alternator field current, reducing the risk of alternator damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the switch positions on the 8501DP?\u003c\/strong\u003e The 8501DP has four positions: OFF-NONE-ON-ON, allowing selection between battery banks or combined operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Perko 8501DP?\u003c\/strong\u003e The 8501DP measures 5-1\/2 inches in diameter by 2-5\/8 inches deep and weighs 0.85 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 8501DP switch made of?\u003c\/strong\u003e The 8501DP has a plastic housing with alloy steel contacts and a red rotary knob actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 8501DP mount and wire in?\u003c\/strong\u003e The 8501DP is a panel-mount switch with clamp-style terminals sized for marine cable connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Perko 8501DP?\u003c\/strong\u003e The 8501DP is finished in red, the standard color for this Perko battery selector switch.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991122456795,"sku":"PKO-8501DP","price":76.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-8501DP_lg__23453.1558118344.500.750.jpg?v=1785188035"},{"product_id":"perko-8511dp-compact-marine-battery-switch-ignition-protected-rotary-selector-4-3-4-x-4-3-4-x-1-7-8","title":"Perko 8511DP Compact Battery Selector Switch, On\/Off, Ignition Protected","description":"\u003cp\u003eThe Perko 8511DP is a compact on\/off battery selector switch designed for boats where mounting space is limited. It uses the same bolt pattern as Perko's larger 8501 Series switches but with a smaller footprint, so it drops into the same mounting locations while taking up roughly a third less space. The rotary knob offers a smooth, easy-to-identify 90 degree turn between positions, making it simple to confirm at a glance whether the switch is on or off.\u003c\/p\u003e\u003cp\u003eBecause the 8511DP is an ignition protected switch, it can be installed in the engine room of a gasoline powered boat. Four removable skirt panels around the base allow cables to be routed in from different directions, and the high conductivity studs are long enough to accept more than one cable while remaining strong enough to handle the torque needed for a secure connection. The switch body is molded from red polycarbonate for durability and visibility, with brass contacts and a normally closed contact configuration rated for 50 Amps at 50 Volts. It uses clamp-style connectors with blade terminals and mounts to the surface via the standard Perko pattern.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8511DP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rotary\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e ON-OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 2-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 50 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 50 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal:\u003c\/strong\u003e Blade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 4-3\/4 inches x 4-3\/4 inches x 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 8 inches x 5 inches x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.95 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Ignition protected, suitable for engine room installation on gasoline powered boats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226370793\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Perko 8511DP switch do?\u003c\/strong\u003e The Perko 8511DP is an on\/off battery selector switch used to connect or disconnect a boat's battery from its electrical system, and it is rated for 50 Amps at 50 Volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much space does the 8511DP need compared to other Perko switches?\u003c\/strong\u003e The 8511DP is part of Perko's compact 8511 Series and uses the same bolt pattern as Perko's 8501 Series switches but requires about a third less mounting space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 8511DP be mounted in an engine room?\u003c\/strong\u003e Yes, the Perko 8511DP is an ignition protected switch, which means it can be installed in the engine room of a gasoline powered boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the exact dimensions of the 8511DP?\u003c\/strong\u003e The Perko 8511DP measures 4-3\/4 inches by 4-3\/4 inches by 1-7\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 8511DP weigh?\u003c\/strong\u003e The Perko 8511DP battery selector switch weighs 0.95 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 8511DP switch made from?\u003c\/strong\u003e The body of the Perko 8511DP is made from red polycarbonate, with brass contacts for the electrical connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cables can connect to the 8511DP?\u003c\/strong\u003e The 8511DP has four removable skirt panels that allow cable connections from different directions, and its high conductivity studs are long enough to handle more than one cable per stud.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 8511DP a two-position or multi-position switch?\u003c\/strong\u003e It is a 2-way, 2-position rotary switch offering ON and OFF settings with a 90 degree turn between positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of terminals and connectors does the 8511DP use?\u003c\/strong\u003e The Perko 8511DP uses clamp-style connectors with blade terminals and a normally closed contact configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the ingress protection rating of the 8511DP?\u003c\/strong\u003e The Perko 8511DP carries an IP54 ingress protection rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 8511DP genuine Perko or aftermarket?\u003c\/strong\u003e The 8511DP, part number 8511DP, is a genuine Perko battery selector switch, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and amperage is the 8511DP rated for?\u003c\/strong\u003e The Perko 8511DP is rated for 50 Volts and 50 Amps.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991122489563,"sku":"PKO-8511DP","price":76.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61yotE8u8kL.jpg?v=1784492199"},{"product_id":"perko-8502dp-locking-battery-selector-switch-with-key-lock-250a-marine-dual-battery-switch-6-50v","title":"Perko 8502DP Locking Battery Selector Switch, Red, 6 to 50 Volt Marine Systems","description":"\u003cp\u003eThe Perko 8502DP is a locking battery selector switch designed for boats running two or more batteries on single or dual engine systems. It lets you choose which battery bank powers starting and charging, or combine both batteries in parallel operation, and the built-in key lock prevents unauthorized or accidental switching once a position is set. The switch body is molded polycarbonate with brass terminals for corrosion resistance, and it is ignition protected for safe use in gasoline engine spaces.\u003c\/p\u003e\u003cp\u003eElectrically, the 8502DP is rated for 6 to 50 Volt marine electrical systems and handles up to 250 Amps continuous or 360 Amps intermittent load, covering the demands of most recreational and light commercial boat electrical systems. Terminals accept a 3\/8 inch stud connection. The switch measures 5-1\/4 inches in diameter with a 2-5\/8 inch mounting depth, sized for standard helm or engine bay panel mounting. For dual engine boats, Perko recommends installing two switches, one per engine, to manage each battery bank independently. The red finish provides clear visual identification at the helm or in the engine compartment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8502DP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Lock:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField Disconnect:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 2-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.91 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polycarbonate body with brass terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e 6 to 50 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 250 Amps continuous, 360 Amps intermittent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Stud Size:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protected:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226559624\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal for marine electrical systems using two or more 6 to 50 Volt batteries, including single and dual engine boats.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the key lock on the Perko 8502DP do?\u003c\/strong\u003e The key lock on the Perko 8502DP battery selector switch lets you lock the switch in a chosen position, preventing it from being bumped or turned by unauthorized users while the boat is unattended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many amps can the 8502DP handle?\u003c\/strong\u003e The Perko 8502DP is rated for 250 Amps continuous and 360 Amps intermittent, and it is designed for 6 to 50 Volt marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the terminal studs on this switch?\u003c\/strong\u003e The terminal studs on the Perko 8502DP battery selector switch are 3\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Perko 8502DP?\u003c\/strong\u003e This switch measures 5-1\/4 inches in diameter with a 2-5\/8 inch mounting depth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Perko 8502DP weigh?\u003c\/strong\u003e The Perko 8502DP battery selector switch weighs 0.91 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko 8502DP ignition protected?\u003c\/strong\u003e Yes, the 8502DP is ignition protected, making it suitable for installation in gasoline engine compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need two switches for a dual engine boat?\u003c\/strong\u003e Yes, for dual engine systems Perko recommends using two 8502DP switches, one for each engine's battery bank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Perko 8502DP and 8501DP?\u003c\/strong\u003e The 8502DP includes a key lock feature, while the 8501DP is the same size switch without a key lock. Both share the 5-1\/4 inch diameter and 2-5\/8 inch depth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Perko 8502DP made from?\u003c\/strong\u003e The 8502DP battery selector switch has a polycarbonate body with brass terminals for durability and corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Perko 8502DP?\u003c\/strong\u003e The Perko 8502DP is finished in red for easy identification at the helm or in the engine compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 8502DP run two batteries in parallel?\u003c\/strong\u003e Yes, the Perko 8502DP allows selection between two batteries for starting and charging, or combined parallel operation of both batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage systems is the 8502DP compatible with?\u003c\/strong\u003e The Perko 8502DP is built for marine electrical systems from 6 to 50 Volts.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991122587867,"sku":"PKO-8502DP","price":90.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8502__61610.1729780446.500.750.jpg?v=1785189221"},{"product_id":"perko-9601dp-medium-duty-on-off-battery-disconnect-switch-red-250a-ignition-protected-marine-battery-switch","title":"Perko 9601DP Battery Disconnect Switch, Red, On-Off Medium Duty, Ignition Protected","description":"\u003cp\u003eThe Perko 9601DP is a medium duty on-off battery disconnect switch from the Perko 9601-9604 Series, one of the most widely used battery switch lines built. It is designed to isolate the battery from the boat's electrical system with a simple two-position on-off control, making it easy to shut down power for storage, service, or safety. As an ignition protected switch, the 9601DP can be installed in the engine rooms of gasoline powered boats. The switch uses Perko's traditional bolt circle mounting pattern, which keeps installation straightforward and allows the switch to be mounted in numerous locations aboard the boat. The housing is red for quick visual identification at the helm or in the engine compartment, and the switch body is plastic with brass contacts for the current-carrying connections. Electrical connections are made via a clamp-style connector. For installations using larger cables, an optional spacer ring (PN 0462DP0RED) is available separately to accommodate the larger cable connections. The 9601-9604 Series shares its footprint with Perko's Compact Disconnect Switches (9611 and 9612 Series), so buyers who want the same mounting pattern in a smaller footprint have that option, while the 9601DP remains the standard medium duty choice for straightforward battery isolation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9601DP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Series:\u003c\/strong\u003e 9601-9604 Series (Medium Duty Disconnect Switches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e On-Off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Ignition protected, suitable for engine rooms of gasoline powered boats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 250 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 50 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic housing with brass contacts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Bulkhead or wall mount, traditional Perko bolt circle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 8 x 6 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.79 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226560286\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal medium duty battery disconnect switch suitable for gasoline powered boats; not restricted to a specific make, model, or engine.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 9601DP used for?\u003c\/strong\u003e The 9601DP is a medium duty on-off battery disconnect switch used to isolate a boat's battery from its electrical system, part of Perko's 9601-9604 Series of switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 9601DP safe to install in a gasoline engine room?\u003c\/strong\u003e Yes, the Perko 9601DP is an ignition protected switch, which means it can be installed in the engine rooms of gasoline powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current and voltage rating of this switch?\u003c\/strong\u003e The Perko 9601DP is rated for 250 amps at 50 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 9601DP switch?\u003c\/strong\u003e The 9601DP has a red housing, which is the color designation reflected in its part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Perko 9601DP weigh?\u003c\/strong\u003e The Perko 9601DP battery disconnect switch weighs 0.79 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the switch?\u003c\/strong\u003e The 9601DP measures approximately 8 x 6 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 9601DP made of?\u003c\/strong\u003e The switch has a plastic housing with brass contacts for the current-carrying connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 9601DP handle larger battery cables?\u003c\/strong\u003e Yes, an optional spacer ring, PN 0462DP0RED, is available separately and allows the 9601DP to accommodate larger cables.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 9601DP mounted?\u003c\/strong\u003e The 9601DP uses Perko's traditional bolt circle mounting pattern, allowing it to be mounted in numerous locations on the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of electrical connection does the 9601DP use?\u003c\/strong\u003e The 9601DP uses a clamp-style connector for its electrical connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many positions does the switch have?\u003c\/strong\u003e The Perko 9601DP is a two-position on-off switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 9601DP and Perko's Compact Disconnect Switches?\u003c\/strong\u003e The 9601DP (9601-9604 Series) is a medium duty switch, while Perko's Compact Disconnect Switches (9611 and 9612 Series) use the same traditional Perko footprint in a more compact design; both are ignition protected and mount using the same bolt pattern.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991122620635,"sku":"PKO-9601DP","price":73.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-9601DP_lg__40401.1558116635.500.750.jpg?v=1785188071"},{"product_id":"perko-9611dp-compact-medium-duty-main-battery-disconnect-switch-with-key-lock-ignition-protected-on-off-marine-master-switch","title":"Perko 9611DP Ignition Protected Marine Battery Disconnect Switch","description":"\u003cp\u003eThe Perko 9611DP is an ignition protected battery disconnect switch built for boats that need a heavy-duty way to isolate the battery from the electrical system. Because it is ignition protected, the 9611DP can be installed in the engine room of a gasoline powered boat, in addition to the many other mounting locations these switches support around a vessel.\u003c\/p\u003e\u003cp\u003eThe switch uses four removable skirt panels, which let the cable connections come in from different directions depending on how the switch is mounted, making installation easier in tight electrical panel spaces. Its terminal studs are high conductivity and long enough to accept more than one cable per terminal, while remaining strong enough to withstand the torque needed to make a secure, lasting connection. The 9611DP is part of Perko's 9611 series of battery disconnect switches, a lineup that also includes versions offering additional features such as alternator disconnect and key lock security for added electrical system control.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9611DP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Boat Battery Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.87 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Ignition protected, suitable for gasoline engine room installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Access:\u003c\/strong\u003e Four removable skirt panels for multi-directional cable connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Studs:\u003c\/strong\u003e High-conductivity studs sized for more than one cable per terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Perko 9611 series battery disconnect switch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko 9611DP ignition protected?\u003c\/strong\u003e Yes, the Perko 9611DP is an ignition protected switch, which is why it can be installed in the engine room of a gasoline powered boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 9611DP be mounted in a gasoline engine room?\u003c\/strong\u003e Yes, because the Perko 9611DP is ignition protected, it is rated for installation in the engine rooms of gasoline powered boats as well as other locations around the vessel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can the Perko 9611DP be mounted on a boat?\u003c\/strong\u003e The Perko 9611DP battery disconnect switch can be mounted in numerous locations on a boat, including gasoline engine rooms thanks to its ignition protected design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cables can be connected to each terminal stud on the 9611DP?\u003c\/strong\u003e The high-conductivity terminal studs on the Perko 9611DP are long enough to handle more than one cable per stud.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the removable skirt panels on the 9611DP used for?\u003c\/strong\u003e Four removable skirt panels on the Perko 9611DP allow cable connections to be made from different directions, making the switch easier to wire in tight mounting spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Perko 9611DP weigh?\u003c\/strong\u003e The Perko 9611DP battery disconnect switch weighs 0.87 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product category does the Perko 9611DP fall under?\u003c\/strong\u003e The Perko 9611DP is classified as a boat battery switch, specifically a battery disconnect switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the terminal studs on the 9611DP strong enough for secure connections?\u003c\/strong\u003e Yes, the studs on the Perko 9611DP are strong enough to handle the torque needed to make a secure cable connection, in addition to being high conductivity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo any switches in the Perko 9611 series include alternator disconnect or key lock security?\u003c\/strong\u003e Certain versions within Perko's 9611 series offer additional features such as alternator disconnect and key lock security, beyond the standard on-off disconnect function.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 9611DP part of a specific Perko switch series?\u003c\/strong\u003e Yes, the Perko 9611DP belongs to Perko's 9611 series of ignition protected battery disconnect switches.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991122653403,"sku":"PKO-9611DP","price":73.74,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71HkoGe5g7L.jpg?v=1784492226"},{"product_id":"bep-771-s-ez-pro-installer-ez-mount-400a-battery-selector-switch-48v-dc","title":"BEP 771-S-EZ Pro Installer EZ-Mount 400A Battery Selector Switch, 48V DC","description":"\u003cp\u003eThe BEP 771-S-EZ Pro Installer EZ-Mount Battery Selector Switch is a front-wired battery switch built for boats running 12 to 48 volt DC electrical systems. Unlike conventional selector switches that require cabling from the rear, the EZ-Mount design lets the installer run and terminate cables from the front of the switch, which speeds up installation and keeps servicing straightforward in tight engine spaces. The switch controls battery bank selection with 1, 2, Both, and Off positions, and a removable knob allows the switch to be isolated during maintenance without disconnecting cabling.\u003c\/p\u003e\u003cp\u003eConstruction is fiber reinforced plastic, chosen for strength and resistance to the heat and chemical exposure typical of a marine engine compartment, and the switch is waterproof to IP66. Three removable side plates give access to the internal studs for wiring and add a layer of protection once installation is complete. The 10mm (3\/8 inch) studs are tinned copper and paired with stainless steel washers and nuts to resist corrosion. The switch carries a 400 amp continuous rating, 600 amps for 5 minute intermittent loads, and 1500 amps for 10 second cranking bursts, and it is tested to UL1107 ignition protection standards and CE marked.\u003c\/p\u003e\u003cp\u003eThe 771-S-EZ shares its 3.85 inch by 3.85 inch mounting footprint and interconnection height with the rest of the BEP Pro Installer power management range, so it can be clustered directly with Pro Installer busbars and related components using solid link bars for a compact, organized installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e BEP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 771-S-EZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating (Continuous):\u003c\/strong\u003e 400 Amps DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating (Intermittent, 5 minutes):\u003c\/strong\u003e 600 Amps DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating (Cranking, 10 seconds):\u003c\/strong\u003e 1500 Amps DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 48 Volts DC (for 12-48V systems)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.85 inches x 3.85 inches x 3.62 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Footprint:\u003c\/strong\u003e 3.85 inches x 3.85 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Positions:\u003c\/strong\u003e 1, 2, Both, Off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 3 x 10mm (3\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fiber reinforced plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance Rating:\u003c\/strong\u003e IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e UL1107, CE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 843687007692\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat makes the EZ-Mount version different from a standard battery switch?\u003c\/strong\u003e The 771-S-EZ allows all cabling to be run and terminated from the front of the switch rather than the rear, which makes installation and later servicing easier in tight spaces, while keeping the same 400 amp continuous rating and mounting footprint as BEP's standard Pro Installer switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage can this switch handle?\u003c\/strong\u003e The BEP 771-S-EZ is rated for 400 amps continuous, 600 amps for 5-minute intermittent loads, and 1500 amps for 10-second cranking bursts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this switch waterproof?\u003c\/strong\u003e Yes, the 771-S-EZ is rated IP66, meaning it is protected against dust ingress and powerful water jets, which suits it to open engine bays and bilge areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage systems does it work with?\u003c\/strong\u003e It is rated at 48 Volts DC and is suitable for 12 to 48 volt DC marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the switch positions?\u003c\/strong\u003e The 771-S-EZ operates with four positions: 1, 2, Both, and Off, allowing selection of either battery bank, both banks together, or full disconnection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size cable and studs does it use?\u003c\/strong\u003e The switch has three 10mm (3\/8 inch) tinned copper studs with stainless steel washers and nuts for the battery cable connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the switch made of?\u003c\/strong\u003e The 771-S-EZ is constructed of fiber reinforced plastic, chosen for strength and resistance to the heat and chemicals found in a marine engine compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I service the battery bank without removing all the wiring?\u003c\/strong\u003e Yes, the 771-S-EZ has a removable knob that allows the switch to be isolated for servicing, and three removable side plates provide access to the internal wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and mounting footprint?\u003c\/strong\u003e The switch measures 3.85 inches by 3.85 inches by 3.62 inches, with a 3.85 inch by 3.85 inch mounting footprint, matching the standard Pro Installer switch layout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch meet marine ignition protection standards?\u003c\/strong\u003e Yes, the BEP 771-S-EZ is tested to UL1107 ignition protection standards and is CE marked.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this battery switch weigh?\u003c\/strong\u003e The 771-S-EZ weighs 1.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this switch be combined with other BEP power management products?\u003c\/strong\u003e Yes, the 771-S-EZ shares its interconnection height with the rest of the BEP Pro Installer range, so it can be clustered with Pro Installer busbars and other components using solid link bars.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":49027434021083,"sku":"BEP-771-S-EZ","price":72.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/771-S-EZ__70746.1722348173.500.750.jpg?v=1785163334"},{"product_id":"bep-701s-mini-battery-selector-switch-2-bank-1-2-both-off-200a-continuous","title":"BEP 701S Mini Battery Selector Switch, 2 Bank, 1-2-Both-Off, 200A Continuous","description":"\u003cp\u003eThe BEP 701S Mini Battery Selector Switch is a compact, 2-bank battery switch built for boats that need to isolate or combine two battery banks in a small footprint. It offers 1, 2, Both, and Off operation, letting the operator select either battery bank individually, run both together, or shut off battery power entirely. The switch body is molded from high-strength, fiber reinforced plastic engineered for strong high-temperature performance and resistance to onboard chemicals and fuels. Tin-plated copper studs and nuts resist corrosion and maintain a solid electrical connection over time.\u003c\/p\u003e\u003cp\u003eThree removable side panels give access for running cables up to 1\/0 gauge, and a rear cover insulates the rear terminals to guard against short circuits, helping the switch meet ABYC requirements. The BEP 701S is ignition protected and can be surface mounted or recess mounted by cutting a 2.1 inch hole. Please note that, like other selector switches, the BEP 701S does not separate connected electronics from harmful engine starting voltage spikes, so sensitive electronics should be wired accordingly.\u003c\/p\u003e\u003cp\u003eRated 200 Amps DC continuous, 300 Amps DC intermittent (5 minutes), and 1000 Amps DC cranking (10 seconds) at 48 Volts DC, the BEP 701S suits dual-battery-bank boats needing a simple, economical way to manage two banks from one compact switch.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e BEP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 701S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e 1, 2, Both, Off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Battery Banks:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 200 Amps DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Rating (5 min):\u003c\/strong\u003e 300 Amps DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrank Rating (10 sec):\u003c\/strong\u003e 1000 Amps DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 48 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 2 x 3\/8 inch (10mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Size to Meet Rating:\u003c\/strong\u003e 3\/0 AWG (95 square mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.75 inches L x 2.75 inches W x 3 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 2.1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface mount or recess mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-strength, fiber reinforced plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud and Nut Finish:\u003c\/strong\u003e Tin-plated copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Ignition protected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 870216001968\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the BEP 701S battery selector switch do?\u003c\/strong\u003e The BEP 701S Mini Battery Selector Switch lets a boat owner choose which of two battery banks is connected, using 1, 2, Both, and Off positions, so batteries can be run individually, combined, or fully disconnected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many battery banks does the 701S support?\u003c\/strong\u003e The BEP 701S is a 2-bank switch, designed to manage two separate battery banks from a single rotary control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage rating of the 701S switch?\u003c\/strong\u003e It is rated 200 Amps DC continuous, 300 Amps DC intermittent for 5 minutes, and 1000 Amps DC cranking for 10 seconds, at 48 Volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole is needed to mount the BEP 701S?\u003c\/strong\u003e A 2.1 inch mounting hole is required, and the BEP 701S Mini Battery Selector Switch can be either surface mounted or recess mounted using that hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the switch?\u003c\/strong\u003e The BEP 701S measures 2.75 inches long by 2.75 inches wide by 3 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 701S switch made from?\u003c\/strong\u003e It is constructed of high-strength, fiber reinforced plastic chosen for strong high-temperature performance and resistance to chemicals, with tin-plated copper studs and nuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cable size does the 701S require?\u003c\/strong\u003e To meet the switch's rating, 3\/0 AWG (95 square mm) cable should be used, and the switch accommodates cable up to 1\/0 gauge through its removable side panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the BEP 701S protect electronics from engine starting spikes?\u003c\/strong\u003e No. Like other selector switches, the BEP 701S does not separate connected electronics from harmful engine starting voltage spikes, so sensitive electronics should not rely on it for that protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the BEP 701S ignition protected and ABYC compliant?\u003c\/strong\u003e Yes, the BEP 701S is ignition protected, and its three removable side panels plus insulated rear terminal cover are designed to help the installation meet ABYC requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 701S different from the BEP 701 Contour switch?\u003c\/strong\u003e The BEP 701S is a smaller 2-bank selector switch with 1-2-Both-Off operation rated 200A continuous, while the BEP 701 Contour is a larger single-bank On\/Off master switch rated 275A continuous with a patented locking system for ganging multiple switches together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the BEP 701S?\u003c\/strong\u003e The BEP 701S Mini Battery Selector Switch ships as a complete switch assembly with control knob, removable side panels, and rear terminal cover, ready for surface or recess mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the BEP 701S switch?\u003c\/strong\u003e The BEP 701S Mini Battery Selector Switch weighs 0.3 pounds.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":49027433988315,"sku":"BEP-701S","price":45.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/701S__60024.1722347635.500.750.jpg?v=1785163334"},{"product_id":"bep-marine-701-contour-battery-master-switch-on-off-275a-continuous-rating","title":"BEP Marine 701 Contour Battery Master Switch, On\/Off, 275A Continuous Rating","description":"\u003cp\u003eThe BEP Marine 701 Contour Battery Master Switch is an On\/Off master disconnect switch built for boats that need a single, reliable way to isolate the battery. It is molded from high-strength, fiber reinforced plastic engineered for excellent high-temperature performance and resistance to chemicals, so it holds up in engine bays and other harsh marine environments. The switch uses BEP's patented Contour Locking System, which lets it operate as a stand-alone unit or lock together side by side with other Contour switches for a clean, integrated battery management panel. The control knob accepts interchangeable labels for different applications and can be removed entirely by turning it to a counter-clockwise 45 degree position, letting an installer lock out the switch during service. Three removable side panels give access for cables up to 1\/0 gauge, and a rear cover insulates the rear terminals to prevent short circuits. Installation is flexible: the BEP 701 can be surface mounted or recess mounted by cutting a 2.1 inch hole. Tin-plated copper studs and nuts resist corrosion, and the switch is ignition protected. With this combination of features the BEP 701 is designed to meet ABYC requirements for battery disconnect switches, making it a straightforward upgrade or replacement for a boat's single-bank battery isolation switch.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e BEP Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 701\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e On\/Off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Battery Banks:\u003c\/strong\u003e 1 Battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 275 A DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Rating (5 min):\u003c\/strong\u003e 455 A DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrank Rating (10 sec):\u003c\/strong\u003e 1250 A DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 48 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 2 x 3\/8 inch \/ 10mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable to Meet Rating:\u003c\/strong\u003e 3\/0 AWG \/ 95 mm2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.75 inches L x 2.75 inches W x 3 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 2.1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-strength, fiber reinforced plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP65\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e cUL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Ignition protected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.35 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 870216000015\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the BEP 701 battery switch do?\u003c\/strong\u003e The BEP 701 Contour Battery Master Switch is an On\/Off disconnect switch that isolates a single battery bank from the boat's electrical system, letting the operator cut power completely for storage, service, or safety.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many battery banks does the BEP 701 handle?\u003c\/strong\u003e The BEP 701 is rated for 1 battery bank with simple On\/Off operation, unlike selector-style switches that manage two banks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the continuous amperage rating of this switch?\u003c\/strong\u003e 275 A DC continuous, with an intermittent rating of 455 A DC for 5 minutes and a cranking rating of 1250 A DC for 10 seconds, all at 48 V DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole does the BEP 701 need?\u003c\/strong\u003e It requires a 2.1 inch mounting hole for recess mounting, or it can be surface mounted instead, using overall dimensions of 2.75 inches L x 2.75 inches W x 3 inches H.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the BEP 701 made of?\u003c\/strong\u003e It is constructed of high-strength, fiber reinforced plastic chosen for excellent high-temperature performance and resistance to chemicals in the engine bay environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cable size does the BEP 701 support?\u003c\/strong\u003e The switch accepts cable up to 1\/0 gauge through its removable side panels and is rated to meet 3\/0 AWG (95 mm2) cable for full amperage capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the BEP 701 ABYC compliant?\u003c\/strong\u003e Yes, the removable side panels, insulated rear terminal cover, and overall design of the BEP 701 Contour Battery Master Switch are built to meet ABYC requirements for battery disconnect switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the BEP 701 be locked together with other switches?\u003c\/strong\u003e Yes, it uses BEP's patented Contour Locking System, which allows the 701 to be installed as a stand-alone switch or locked side by side with other Contour switches for a multi-switch panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the control knob be removed for security or service?\u003c\/strong\u003e Yes, the control knob on the BEP 701 can be removed by turning it to a counter-clockwise 45 degree position, which is useful for locking out the switch during maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the BEP 701 ignition protected?\u003c\/strong\u003e Yes, the BEP 701 Contour Battery Master Switch is ignition protected, making it suitable for installation near gasoline engines and fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the BEP 701 weigh?\u003c\/strong\u003e The BEP 701 Contour Battery Master Switch weighs 0.35 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the BEP 701 and a selector switch?\u003c\/strong\u003e The BEP 701 is a single-bank On\/Off master switch, while selector-style switches such as BEP's Mini Battery Selector offer 1, 2, Both, and Off positions for managing two battery banks; selector switches also will not separate electronics from harmful engine starting spikes.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":49027993698523,"sku":"BEP-701","price":37.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/img_b97cb5d1-c6f6-439c-903f-97cdda4ce032.jpg?v=1785332687"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/7611.jpg?v=1785356897","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-electrical-system-batteries-battery-management-battery-switches-selectors.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}