{"title":"Batteries \u0026 Battery Management","description":null,"products":[{"product_id":"sierra-18-99367-marine-battery-cable-red-6-awg-6-ft-tinned-ready-battery-to-starter-power-lead","title":"Sierra Battery Cable 18-99367, 6 Foot 6 AWG Red Marine Wiring Cable","description":"\u003cp\u003eThe Sierra 18-99367 is a 6 foot length of 6 AWG red battery cable built for marine battery wiring, charging circuits, and battery charger accessory connections. Heavy-gauge 6 AWG copper cable is sized to carry the higher current loads common in marine battery banks and charging systems, and the red color coding lets installers quickly identify the positive run and keep wiring organized and code-compliant during installation or troubleshooting. At 6 feet in length, it offers enough reach to route between a battery, switch, or charger without excess slack, reducing the need to splice shorter sections together. This cable is a straightforward, general-purpose wiring solution rather than a vehicle-specific fitment part, making it suitable for boats, battery chargers, and other marine 12-volt systems that call for a 6 AWG red cable. It is sold as a standalone cable for use in new installations or as a replacement when an existing battery cable has become corroded, cracked, or undersized for the application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99367\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 6 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282399429\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat length and gauge is the Sierra 18-99367 battery cable?\u003c\/strong\u003e The Sierra 18-99367 is a 6 foot length of 6 AWG cable, sized for marine battery and charging circuit wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this cable?\u003c\/strong\u003e It is red, which is the standard color used to mark the positive side of a 12-volt battery wiring circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-99367 cable weigh?\u003c\/strong\u003e 0.9 pounds is the weight of the Sierra 18-99367 6 foot battery cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable pre-terminated with connectors or lugs?\u003c\/strong\u003e The Sierra 18-99367 is supplied as a length of cable; no terminal or connector details are specified for this part, so buyers needing lugs should plan to add them separately or confirm before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cable be used for a battery charger installation?\u003c\/strong\u003e Yes, the 18-99367 red 6 AWG cable is suitable for marine battery charger accessory wiring as well as general battery and 12-volt circuit connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-99367 fit a specific boat make or engine model?\u003c\/strong\u003e No specific make, engine, or year fitment is listed for this cable; it is a general-purpose 6 AWG battery cable rather than a model-specific part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 6 AWG cable heavy enough for a marine battery bank?\u003c\/strong\u003e 6 AWG is a heavier gauge suited to carrying higher current loads than lighter wire, which is why it is commonly used for battery and charging circuit runs on boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Sierra 18-99367 red battery cable carries UPC 808282399429.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I cut the 6 foot cable to a shorter length?\u003c\/strong\u003e The 18-99367 is sold as a 6 foot length, and like most battery cable it can be cut down to a shorter run if a full 6 feet is not needed for the installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part?\u003c\/strong\u003e Yes, part number 18-99367 is the Sierra part number for this 6 foot, 6 AWG red battery cable.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988442099931,"sku":"SIE-18-99367","price":36.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-941-0606-R_lg__13838.1558113899.500.750.jpg?v=1785189126"},{"product_id":"sierra-18-99372-marine-battery-cable-6-awg-6-ft-black","title":"Sierra 18-99372 Battery Cable, 6 AWG, 6 Foot, Black","description":"\u003cp\u003eThe Sierra 18-99372 is a 6 foot length of black 6 AWG battery cable built for marine battery wiring connections. It falls in Sierra's marine battery charger accessories line, making it a straightforward choice for boaters who need to run or replace a battery cable connection on board. The cable is supplied as a single 6 foot length, ready to be sized and terminated for your specific battery hookup.\u003c\/p\u003e\u003cp\u003eAt 6 AWG, this cable is sized for demanding marine 12-volt wiring runs, and its black jacket color is the standard color-coding boaters look for when routing battery cable alongside a matching red positive run. Weighing 0.9 pounds, it is a manageable length for onboard installation or as a spare kept with your battery service kit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99372\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 6 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282399320\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 cable per unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Marine Battery Charger Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat gauge is the Sierra 18-99372 battery cable?\u003c\/strong\u003e It is 6 AWG battery cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this cable?\u003c\/strong\u003e The Sierra 18-99372 is 6 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-99372?\u003c\/strong\u003e Black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-99372 weigh?\u003c\/strong\u003e 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cables come in a unit?\u003c\/strong\u003e The Sierra 18-99372 is sold as a quantity of 1 cable per unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this cable?\u003c\/strong\u003e 18-99372, the Sierra part number for this 6 foot, 6 AWG black battery cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of marine part is the Sierra 18-99372?\u003c\/strong\u003e It is listed under marine battery charger accessories, used for marine battery wiring connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-99372 cross-reference to another manufacturer's part number?\u003c\/strong\u003e No OEM cross-reference numbers are listed for the Sierra 18-99372.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-99372 a genuine Sierra part?\u003c\/strong\u003e Yes, it is sold under the Sierra brand as part number 18-99372.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988442132699,"sku":"SIE-18-99372","price":36.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-941-0606-B_lg__06298.1558113813.500.750.jpg?v=1785188078"},{"product_id":"sierra-18-99459-marine-battery-cable-black-8-ft-6-awg","title":"Sierra Marine Battery Cable, Black, 8 Feet, 6 AWG, Part 18-99459","description":"\u003cp\u003eThis Sierra battery cable is an 8 foot length of 6 AWG cable with black insulation, built for marine battery wiring and charging connections aboard boats. The 6 AWG gauge is sized to carry higher-amperage current safely, making this cable a fit for main battery leads, battery-to-starter runs, and other heavy-duty electrical connections where a lighter-gauge wire would be undersized. The black jacket allows it to be paired with a red cable of matching gauge and length to keep positive and negative runs visually distinguished during installation, which simplifies wiring and future troubleshooting.\u003c\/p\u003e\u003cp\u003eAt 8 feet, the cable provides enough length to route through typical engine compartments, battery boxes, and bilge areas without needing to splice multiple shorter sections together. It is identified under UPC 808282396398 and is sold as a single cable, part number 18-99459.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99459\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 6 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282396398\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat gauge is the Sierra 18-99459 battery cable?\u003c\/strong\u003e The Sierra 18-99459 battery cable is 6 AWG, a gauge sized for higher-amperage marine electrical connections such as main battery leads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this battery cable?\u003c\/strong\u003e This Sierra battery cable, part number 18-99459, measures 8 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-99459 cable?\u003c\/strong\u003e Black. The Sierra 18-99459 cable has a black outer jacket, which is typically used for the negative side of a battery circuit when paired with a red positive cable of matching gauge and length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the cable weigh?\u003c\/strong\u003e The Sierra 18-99459 battery cable weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable sold as a single cable or a pair?\u003c\/strong\u003e It is sold as a single 8 foot black cable, part number 18-99459, not as a matched positive\/negative pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use 6 AWG cable for my boat's main battery connections?\u003c\/strong\u003e 6 AWG is a common gauge for marine battery wiring where higher current-carrying capacity is needed compared to lighter-gauge wire; the Sierra 18-99459 is offered in this gauge at an 8 foot length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cable have a UPC I can look up?\u003c\/strong\u003e Yes, the Sierra 18-99459 battery cable carries UPC 808282396398.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to cut this cable to length during installation?\u003c\/strong\u003e The Sierra 18-99459 is supplied at a fixed 8 foot length, so it can be trimmed to the exact run needed for your installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-99459 cable pre-terminated with lugs or connectors?\u003c\/strong\u003e The available product details for the Sierra 18-99459 describe the cable itself (black, 8 feet, 6 AWG) without specifying pre-installed terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is part number 18-99459 used for?\u003c\/strong\u003e Part number 18-99459 is a Sierra 8 foot, 6 AWG black marine battery cable used for battery and charging wiring connections on boats.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988444328155,"sku":"SIE-18-99459","price":36.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-941-0608-B_lg__07613.1558114007.500.750.jpg?v=1785329169"},{"product_id":"sierra-18-99460-red-marine-battery-cable-8-ft","title":"Sierra Marine Battery Cable, Red, 8 Gauge, 8 Feet - 18-99460","description":"\u003cp\u003eThis Sierra battery cable is a red, 8 gauge cable cut to an 8 foot length, built for marine battery wiring and charging circuit connections aboard a boat. Red coloring identifies it as a positive-lead cable, helping keep polarity clear and consistent when wiring a battery bank, battery charger, or engine starting circuit. The 8 gauge conductor size and 8 foot length make it suited for battery-to-starter, battery-to-switch, or battery charger runs where a pre-cut length saves the work of measuring and cutting bulk cable stock.\u003c\/p\u003e\u003cp\u003eAs a Sierra-branded marine electrical accessory, this cable is intended for use in the demanding marine environment where dependable current-carrying capacity and consistent gauge sizing matter for safe battery and charging system installations.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99460\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Cable Battery Red Ga. 8 Ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Marine Battery Charger Accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 8 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282395810\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat length is the Sierra 18-99460 battery cable?\u003c\/strong\u003e The Sierra 18-99460 battery cable is cut to 8 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gauge is this battery cable?\u003c\/strong\u003e This Sierra battery cable is 8 gauge (8 AWG).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is this cable red instead of black?\u003c\/strong\u003e Red indicates a positive battery lead, which is the standard color convention used to keep polarity clear when wiring a marine battery or charging circuit; Sierra part 18-99460 is the red 8 gauge, 8 foot version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a black version of this same cable?\u003c\/strong\u003e Sierra part 18-99460 is the red positive-lead cable in 8 gauge, 8 foot length; a black negative-lead cable, if needed, would be a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this battery cable typically used for?\u003c\/strong\u003e This 8 gauge, 8 foot cable is used for marine battery wiring, such as battery-to-starter, battery-to-switch, or battery charger connections aboard a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-99460 battery cable weigh?\u003c\/strong\u003e The Sierra 18-99460 battery cable weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cable be cut to a shorter length during installation?\u003c\/strong\u003e The Sierra 18-99460 cable ships pre-cut at 8 feet, and it can be trimmed shorter to fit a specific installation run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable suitable for marine use?\u003c\/strong\u003e Yes, this is a Sierra-branded battery cable categorized as a marine battery charger accessory, intended for boat electrical and charging system wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Sierra battery cable?\u003c\/strong\u003e The UPC for the Sierra 18-99460 red 8 gauge, 8 foot battery cable is 808282395810.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cable come with terminal ends installed?\u003c\/strong\u003e The available product information for Sierra 18-99460 describes the cable itself; specific terminal ends are not specified, so buyers needing terminals should plan to add or crimp them separately.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988444426459,"sku":"SIE-18-99460","price":36.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-941-0608-R_lg__63198.1558114060.500.750.jpg?v=1785329169"},{"product_id":"sierra-18-99558-terminal-extenders-set-of-4-marine-specialty-tool","title":"Sierra Terminal Extenders, Set of 4, Battery Terminal Extension Kit 18-99558","description":"\u003cp\u003eThe Sierra 18-99558 Terminal Extenders give you a set of 4 extenders designed to add usable length and connection points to battery terminals, making it easier to attach additional cables, accessories, or ring terminals without crowding the primary terminal connection. This set is a practical solution for boats and vehicles where multiple accessories need to share a single battery post, helping keep wiring organized and connections secure.\u003c\/p\u003e\u003cp\u003eSold as a set of 4, these extenders are compact and lightweight, adding minimal bulk to your battery compartment while providing the extra terminal capacity many marine electrical setups require.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99558\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Battery Terminal Extenders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Set of 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09375 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 736983855862\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Sierra 18-99558 terminal extenders set?\u003c\/strong\u003e The Sierra 18-99558 set includes 4 battery terminal extenders, giving you 4 extra connection points for your battery terminals in one purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much do the Sierra 18-99558 terminal extenders weigh?\u003c\/strong\u003e The complete set of 4 Sierra 18-99558 terminal extenders weighs 0.09375 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-99558 terminal extenders?\u003c\/strong\u003e The UPC for the Sierra 18-99558 set of 4 terminal extenders is 736983855862.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are battery terminal extenders used for?\u003c\/strong\u003e Terminal extenders like the Sierra 18-99558 set are used to add extra length and connection capacity to a battery terminal so additional cables or accessories can be connected without overcrowding the original post.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminal extenders come in one Sierra 18-99558 package?\u003c\/strong\u003e One package of the Sierra 18-99558 contains 4 terminal extenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the Sierra 18-99558 terminal extenders sold individually or as a set?\u003c\/strong\u003e The Sierra 18-99558 is sold only as a set of 4 terminal extenders, not individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Sierra 18-99558 terminal extenders help reduce clutter on a battery post?\u003c\/strong\u003e Yes, by extending the terminal connection point, the Sierra 18-99558 set makes it easier to organize multiple wire connections at a single battery post rather than stacking them all on the original terminal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-99558 terminal extenders set a genuine Sierra product?\u003c\/strong\u003e Yes, the Sierra 18-99558 is a genuine Sierra product sold as a new set of 4 terminal extenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes part number 18-99558?\u003c\/strong\u003e Part number 18-99558 is manufactured by Sierra, a marine parts brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sierra 18-99558 terminal extender set installed?\u003c\/strong\u003e The Sierra 18-99558 terminal extenders attach to the existing battery terminal to provide an additional connection point for cables or accessories.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988446720219,"sku":"SIE-18-99558","price":20.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-519-TS77_lg__35407.1558113696.500.750.jpg?v=1785329185"},{"product_id":"sierra-mp38910-marine-battery-disconnect-switch-lever-operated-175a-continuous-800a-intermittent-3-8in-brass-terminals","title":"Sierra MP38910 Lever Operated Battery Disconnect Switch, 175A Continuous \/ 800A Intermittent","description":"\u003cp\u003eThe Sierra MP38910 is a lever operated battery disconnect switch built to isolate a boat's battery from its electrical system when the vessel is not in use, helping prevent parasitic drain and reduce fire risk during storage or transport. The switch is rated for 175 amps continuous and 800 amps intermittent, making it suitable for cutting power to marine electrical circuits that see high startup or surge loads. Current flows through 3\/8 inch brass terminals, chosen for their conductivity and corrosion resistance in a marine environment. The lever itself is chrome plated brass, giving it a durable, corrosion resistant finish that stands up to salt air and routine handling. A faceplate is included, allowing for a finished, panel-mounted installation. Operation is simple: the lever moves between on and off positions, giving boat owners a fast, manual way to fully disconnect the battery without pulling cable terminals. This switch is a straightforward replacement or upgrade for existing lever operated disconnect switches on boats, and its compact footprint suits helm panels, battery compartments, and other mounting locations where a manual disconnect is needed. Weighing 1.07 pounds, it is a rugged, panel-mount component intended for direct-current marine electrical systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP38910\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Lever Operated Battery Disconnect Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Current Rating:\u003c\/strong\u003e 175 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Current Rating:\u003c\/strong\u003e 800 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Size:\u003c\/strong\u003e 3\/8 inch brass terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLever Material\/Finish:\u003c\/strong\u003e Chrome plated brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Faceplate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.07 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of the Sierra MP38910 battery disconnect switch?\u003c\/strong\u003e The MP38910 is rated for 175 amps continuous and 800 amps intermittent, so it can handle both steady loads and short high-current surges on a marine 12-volt circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP38910 a manual or automatic disconnect switch?\u003c\/strong\u003e It is a manual, lever operated switch. You move the chrome plated brass lever by hand to open or close the connection between the battery and the boat's electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra MP38910 come with a faceplate?\u003c\/strong\u003e Yes, a faceplate is included with the MP38910, allowing for a clean, finished panel-mount installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size terminals does this switch use?\u003c\/strong\u003e The MP38910 uses 3\/8 inch brass terminals for its battery and load connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the lever made from?\u003c\/strong\u003e Chrome plated brass. The plating resists corrosion in the salt-air and humid conditions common in marine electrical compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra MP38910 weigh?\u003c\/strong\u003e The MP38910 battery disconnect switch weighs 1.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the MP38910 switch?\u003c\/strong\u003e The MP38910 measures approximately 0.39 x 0.39 x 0.39 inches for the core switch body, before the faceplate and lever.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the MP38910 be used to prevent battery drain during storage?\u003c\/strong\u003e Yes, flipping the lever to the off position on the Sierra MP38910 fully isolates the battery from the boat's wiring, which helps prevent parasitic drain when the boat is stored.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra MP38910 suitable for high-amperage marine circuits?\u003c\/strong\u003e With a 175 amp continuous and 800 amp intermittent rating, the MP38910 is built for higher-current marine DC circuits, not just small accessory loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP38910 require any special tools to install?\u003c\/strong\u003e The MP38910 mounts with its included faceplate and connects via 3\/8 inch brass terminals, so installation uses standard marine electrical hand tools for terminating and securing the cables.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988454682843,"sku":"SIE-MP38910","price":77.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sie-mp38910_lg__92395.1558133331.500.750.jpg?v=1785187979"},{"product_id":"sea-dog-415110-1-marine-battery-terminal-covers-red-black-pair-1-2-post-4-2-1-gauge-cable-uscg-abyc-compliant","title":"Sea-Dog Battery Terminal Covers 415110-1, 1\/2 Inch Stud, Red\/Black Pair, 4-2-1 Gauge Cable","description":"\u003cp\u003eThe Sea-Dog 415110-1 Battery Terminal Covers insulate integral marine wing nut battery terminals to protect cables and connections from corrosion and accidental shorting. Molded from injection molded PVC, this red and black pair is color coded so you can identify positive and negative terminals at a glance and avoid polarity misidentification during installation or maintenance. Each cover measures 1\/2 inch at the stud opening, with an overall footprint of 1-5\/8 inches by 1-11\/16 inches by 2-7\/8 inches, sized for cable gauges 4, 2, and 1. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals, making them a straightforward way to bring a battery bank up to code. They are designed to fit most marine batteries as well as automotive batteries fitted with add-on marine terminals, so they work equally well on boats, RVs, and other 12 volt DC applications using standard wing nut terminal posts. Sold as a matched red and black pair, they are packaged for easy replacement or for outfitting a new battery installation. Whether you are winterizing, rewiring a battery box, or simply replacing cracked or missing terminal covers, the 415110-1 offers a durable, corrosion resistant solution built to marine standards.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 415110-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded PVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\/Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Gauge Compatibility:\u003c\/strong\u003e 4, 2, 1 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (Stud Opening):\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 2-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 pairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e Meets USCG and ABYC requirements for prevention of accidental grounding of battery terminals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits most marine batteries as well as automotive batteries fitted with add-on marine terminals, using integral wing nut terminal posts sized for 4, 2, and 1 gauge cable.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size battery terminals does the Sea-Dog 415110-1 fit?\u003c\/strong\u003e The 415110-1 fits terminal studs with a 1\/2 inch opening and covers cable gauges 4, 2, and 1, with an overall size of 1-5\/8 inches by 1-11\/16 inches by 2-7\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these terminal covers sold as a pair?\u003c\/strong\u003e Yes, the 415110-1 is sold as a red and black pair, one cover for the positive terminal and one for the negative terminal, packaged 5 pairs to a standard pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the Sea-Dog 415110-1 covers made from?\u003c\/strong\u003e They are made from injection molded PVC, chosen for its resistance to corrosion and its ability to insulate battery terminal connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these covers meet USCG or ABYC standards?\u003c\/strong\u003e Yes, the Sea-Dog 415110-1 Battery Terminal Covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 415110-1 fit automotive batteries?\u003c\/strong\u003e It will fit most marine batteries as well as automotive batteries that have add-on marine terminals installed on the posts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are the covers colored red and black?\u003c\/strong\u003e The red and black coloring on the 415110-1 pair is a color coding system that helps prevent polarity misidentification when connecting or servicing battery terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 415110-1 weigh?\u003c\/strong\u003e The pair of terminal covers weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any tools to install the 415110-1 terminal covers?\u003c\/strong\u003e No tools are required; these covers snap over integral wing nut terminals on the battery post to insulate the connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 415110-1 and the smaller Sea-Dog terminal covers like 415111 or 415112?\u003c\/strong\u003e The 415110-1 is a red\/black pair sized for 4, 2, 1 gauge cable with a 1\/2 inch stud opening, while 415111 and 415112 are single-color covers (red or black) rather than a matched pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 415110-1?\u003c\/strong\u003e Each order includes one red and one black injection molded PVC terminal cover, sized for a 1\/2 inch stud, sold in packs of 5 pairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 415110-1 covers be used on both battery terminals of a standard marine battery?\u003c\/strong\u003e Yes, since they are sold as a matched red and black pair, one 415110-1 cover insulates the positive terminal and the other insulates the negative terminal on a standard 2-post marine battery.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988771942619,"sku":"S-D-415110-1","price":6.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8074.jpg?v=1784429118"},{"product_id":"sea-dog-415210-1-wing-nut-style-battery-terminal-set-positive-negative-die-cast-lead","title":"Sea-Dog Wing Nut Style Battery Terminal Set, Positive and Negative, Die Cast Lead","description":"\u003cp\u003eThe Sea-Dog Wing Nut Style Battery Terminal Set (415210-1) converts standard battery posts to stud connectors, letting you disconnect a marine battery quickly without tools. The set includes one positive and one negative terminal, each cast from die cast lead for corrosion resistance and reliable conductivity in a marine electrical environment. Each terminal is polarity specific to meet USCG regulations, so the positive and negative terminals are sized differently and cannot be mixed up during installation. The wing nut design allows the connection to be tightened by hand and released quickly in an emergency or for battery maintenance, without needing a wrench. This set is sold as a display packed pair (one positive, one negative) and is intended as a direct upgrade or replacement for standard battery post clamps on boats and other marine applications where quick-disconnect capability is desired.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 415210-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Positive\/Negative Set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Wing Nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Lead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2-5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 5\/8 inch (positive) \/ 9\/16 inch (negative)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 3\/8 inch (positive) \/ 5\/16 inch (negative)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.72 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 sets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolarity Compliance:\u003c\/strong\u003e USCG regulations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for standard battery posts using wing nut style stud terminals; not specific to a single make or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sea-Dog 415210-1 battery terminal set include?\u003c\/strong\u003e The 415210-1 set includes one positive and one negative wing nut style battery terminal, sold together as a display packed pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are these battery terminals made from?\u003c\/strong\u003e Sea-Dog part 415210-1 is constructed of die cast lead for corrosion resistance and reliable electrical conductivity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the positive and negative terminals in this set be mixed up?\u003c\/strong\u003e No. Each terminal in the 415210-1 set is polarity specific to meet USCG regulations, with different dimensions for the positive and negative sides, so they cannot be installed in the wrong position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 415210-1 terminals?\u003c\/strong\u003e The set measures 2-5\/16 inches at dimension A, 5\/16 inches at dimension C, with the positive terminal at 5\/8 inch (B) and 3\/8 inch (D), and the negative terminal at 9\/16 inch (B) and 5\/16 inch (D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 415210-1 battery terminal set weigh?\u003c\/strong\u003e The 415210-1 positive\/negative set weighs 0.72 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a wing nut style battery terminal used for?\u003c\/strong\u003e A wing nut style battery terminal converts a standard battery post into a stud connector, allowing wires to be attached with a nut and permitting quick disconnection from the battery without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these terminals sold individually or as a pair?\u003c\/strong\u003e The 415210-1 is sold as a set containing both a positive and a negative terminal; Sea-Dog also offers the negative terminal alone (415211-1) and the positive terminal alone (415212-1) as separate parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these battery terminals meet any regulatory standard?\u003c\/strong\u003e Yes, the Sea-Dog 415210-1 terminals are polarity specific to meet USCG regulations for marine battery connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are these terminals packaged?\u003c\/strong\u003e The 415210-1 positive\/negative set is display packed, with a standard pack quantity of 10 sets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this product safe to handle without precautions?\u003c\/strong\u003e The 415210-1 battery terminal set carries a Proposition 65 warning for cancer and reproductive harm due to its die cast lead construction, so care should be taken when handling it.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988772040923,"sku":"S-D-415210-1","price":10.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4975.jpg?v=1784429124"},{"product_id":"sea-dog-420600-1-heavy-duty-on-off-battery-switch-with-removable-key-cap-12-24v-dc-500a-momentary","title":"Sea-Dog Heavy Duty Battery Switch 420600-1, On\/Off with Removable Key, 12-24V 75A Continuous","description":"\u003cp\u003eThe Sea-Dog Heavy Duty Battery Switch (420600-1) is an On\/Off battery disconnect switch built from injection molded nylon for corrosion resistance in marine electrical systems. It carries a 500A momentary rating and a 75A continuous rating at 12-24VDC, making it suitable for isolating a boat's battery from the electrical system when the vessel is not in use or during service work. A removable key is included so the switch can be locked in the Off position, adding a layer of security against unauthorized starts or electrical drain. The switch body measures 4 inches (A dimension), 1-5\/8 inches (B dimension), and 2-1\/4 inches (C dimension), with a 3\/8 inch stud diameter for connecting battery cable terminals. At just 0.29 pounds, it is a compact, lightweight component that mounts easily in tight helm or engine bay locations. This is a straightforward On\/Off function switch (not a dual-battery selector), designed for boaters who need a reliable, simple main power disconnect. The nylon housing and screw terminal construction are built to withstand the vibration and moisture typical of marine environments.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420600-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e On\/Off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12-24 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Amps:\u003c\/strong\u003e 75 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMomentary Amps:\u003c\/strong\u003e 500 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Diameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.29 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey:\u003c\/strong\u003e Removable key included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage rating of the Sea-Dog 420600-1 battery switch?\u003c\/strong\u003e The Sea-Dog 420600-1 is rated for 500 amps momentary and 75 amps continuous at 12-24VDC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this battery switch come with a key?\u003c\/strong\u003e Yes, the 420600-1 includes a removable key that lets you lock the switch in the Off position for added security.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 420600-1 a dual-battery selector switch?\u003c\/strong\u003e No, it is a simple On\/Off function switch, not a selector for switching between multiple battery banks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 420600-1 battery switch made from?\u003c\/strong\u003e It is made from injection molded nylon, chosen for its resistance to corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 420600-1 battery switch?\u003c\/strong\u003e The switch measures 4 inches by 1-5\/8 inches by 2-1\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 420600-1 battery switch weigh?\u003c\/strong\u003e It weighs 0.29 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the stud diameter on the Sea-Dog 420600-1?\u003c\/strong\u003e The stud diameter is 3\/8 inch, sized for standard battery cable terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage systems is the Sea-Dog 420600-1 compatible with?\u003c\/strong\u003e It is rated for 12-24VDC systems, covering both 12-volt and 24-volt marine electrical setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Sea-Dog 420600-1 be used to fully disconnect a boat's battery?\u003c\/strong\u003e Yes, its On\/Off function is designed to isolate the battery from the electrical system, which is useful during storage or servicing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many units come in a standard pack of the Sea-Dog 420600-1?\u003c\/strong\u003e The standard pack quantity for the 420600-1 is 10 each.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988778791131,"sku":"S-D-420600-1","price":23.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5027.jpg?v=1784429391"},{"product_id":"sea-dog-422760-1-battery-switch-with-knob-off-1-both-2-selector-300a-48v-for-marine-battery-banks","title":"Sea-Dog Battery Selector Switch 422760-1, Off\/1\/Both\/2, 48V 300A, Nylon\/Brass","description":"\u003cp\u003eThe Sea-Dog 422760-1 is a four-position battery disconnect and selector switch built to isolate or combine two battery banks aboard a boat. Turning the knob through Off, 1, Both, and 2 lets the operator run off a single battery, combine both banks for extra reserve, or shut the electrical system down completely for storage or service. The switch is rated 48 volts DC at 300 amps, with 3\/8 inch diameter studs for heavy-gauge cable connections.\u003c\/p\u003e\u003cp\u003eConstruction is injection molded nylon for the housing with machined brass contacts at the switching points, giving corrosion resistance along with a low-resistance current path. The switch is ignition protected and rated safe for installation on gasoline powered boats. It can be mounted on the surface of a panel or from behind a panel for a flush look, and it installs with four #10 RH fasteners (not included).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 422760-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction\/Positions:\u003c\/strong\u003e Off\/1\/Both\/2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e 48 volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Rating:\u003c\/strong\u003e 300 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Diameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (A x B x C):\u003c\/strong\u003e 2-3\/4 inches x 2-3\/4 inches x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.534 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection molded nylon housing with machined brass contacts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface or rear panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Four #10 RH fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Ignition protected, safe for gasoline powered boats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514425407\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for boats requiring a four-position battery disconnect and selector switch; ignition protected for safe use on gasoline powered boats.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo manufacturer cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat do the switch positions on the Sea-Dog 422760-1 do?\u003c\/strong\u003e The 422760-1 has four positions: Off, 1, Both, and 2. Off disconnects everything, 1 and 2 each run off a single battery bank, and Both combines the two banks together, for example to boost a weak battery with the other bank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this battery switch safe for a gasoline powered boat?\u003c\/strong\u003e Yes, the Sea-Dog 422760-1 is ignition protected and rated safe for installation on gasoline powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage and voltage rating of the 422760-1?\u003c\/strong\u003e It is rated for 48 volts DC at 300 amps continuous.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size cable studs does this switch use?\u003c\/strong\u003e The 422760-1 has 3\/8 inch diameter studs for connecting battery cables.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this switch be mounted behind a panel?\u003c\/strong\u003e The 422760-1 can be mounted either on the surface of a panel or from behind the panel for a flush, rear-mount installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 422760-1 made of?\u003c\/strong\u003e The housing is injection molded nylon and the internal contacts are machined brass, a combination chosen for corrosion resistance and reliable current flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 422760-1 weigh?\u003c\/strong\u003e This battery selector switch weighs 0.534 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this switch?\u003c\/strong\u003e The 422760-1 measures 2-3\/4 inches by 2-3\/4 inches by 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the switch come with mounting hardware?\u003c\/strong\u003e No, the 422760-1 installs with four #10 RH fasteners, but those fasteners are not included and must be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 422760-1 and the 422761-1 switch?\u003c\/strong\u003e The 422760-1 is a four-position Off\/1\/Both\/2 switch that can isolate or combine two battery banks, while the 422761-1 is a simpler two-position On\/Off switch for a single battery and single load group.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this switch combine two battery banks?\u003c\/strong\u003e Yes, setting the 422760-1 to the Both position combines the two battery banks, which the simpler On\/Off version of this switch family cannot do.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this battery switch include a knob?\u003c\/strong\u003e Yes, the Sea-Dog 422760-1 is a knob-operated battery switch used to select between Off, battery 1, Both, and battery 2.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988779217115,"sku":"S-D-422760-1","price":39.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5051.jpg?v=1784429466"},{"product_id":"sea-dog-422761-1-compact-battery-switch-on-off-48v-300a-marine-master-disconnect-with-knob","title":"Sea-Dog Compact Battery Switch 422761-1, On\/Off, 48V 300A, 3\/8 Inch Stud","description":"\u003cp\u003eThe Sea-Dog Compact Battery Switch 422761-1 is an On\/Off battery disconnect switch built to isolate a single battery from its load group aboard a boat. It is rated for 48 volts and 300 amps, making it suitable for cutting power to onboard electrical systems when the boat is not in use, which helps prevent parasitic battery drain and protects the electrical system during storage or servicing. The switch is constructed of injection molded nylon with machined brass contacts for durable, corrosion-resistant switching, and it is ignition protected, making it safe for installation on gasoline powered boats.\u003c\/p\u003e\u003cp\u003eThis compact design measures 2-3\/4 inches by 2-3\/4 inches by 3 inches and can be installed either as a surface mount or a rear panel mount, giving flexibility for different helm or engine compartment layouts. The stud diameter is 3\/8 inch to accept common battery cable terminals. Installation requires four #10 RH fasteners, which are not included and must be sourced separately. This On\/Off switch is a single-battery, single-load-group disconnect and does not include the Both\/1\/2 selector functions found on other Sea-Dog battery switches.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 422761-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e On\/Off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 48 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 300 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Diameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 2-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.88 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection molded nylon with machined brass contacts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface or rear panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Required:\u003c\/strong\u003e Four #10 RH fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Ignition protected, safe for gasoline powered boats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514425414\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sea-Dog 422761-1 battery switch do?\u003c\/strong\u003e The Sea-Dog 422761-1 is an On\/Off battery disconnect switch that isolates a single battery from its load group, allowing you to cut power to the boat's electrical system entirely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a selector switch with Both\/1\/2 positions?\u003c\/strong\u003e No, part number 422761-1 is a simple On\/Off switch for a single battery and load group; it does not have the Off\/1\/Both\/2 selector positions found on Sea-Dog's dual-bank switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and amperage is the 422761-1 rated for?\u003c\/strong\u003e This Sea-Dog battery switch is rated for 48 volts and 300 amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this switch be mounted on gasoline powered boats?\u003c\/strong\u003e Yes, the Sea-Dog 422761-1 is ignition protected, which makes it safe for installation on gasoline powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog 422761-1 battery switch mounted?\u003c\/strong\u003e It can be installed as either a surface mount or a rear panel mount, giving flexibility depending on the layout of the helm or engine compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size stud does the 422761-1 use for cable connections?\u003c\/strong\u003e The stud diameter on this Sea-Dog battery switch is 3\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this battery switch?\u003c\/strong\u003e The Sea-Dog 422761-1 measures 2-3\/4 inches by 2-3\/4 inches by 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 422761-1 battery switch made from?\u003c\/strong\u003e It is constructed of injection molded nylon with machined brass contacts for durable, corrosion-resistant operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with the 422761-1?\u003c\/strong\u003e No, installation requires four #10 RH fasteners, which are not included and need to be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 422761-1 battery switch weigh?\u003c\/strong\u003e This battery switch weighs 7.88 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 422761-1 and the 422760-1 switch?\u003c\/strong\u003e The 422761-1 is an On\/Off switch for a single battery, while the 422760-1 offers Off\/1\/Both\/2 selector functions and can isolate or combine two battery banks; both share the same 2-3\/4 inch by 2-3\/4 inch by 3 inch dimensions and 3\/8 inch stud diameter.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988779413723,"sku":"S-D-422761-1","price":33.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5051_811c532c-8f57-43ce-8ebc-b70ffdd66060.jpg?v=1784429475"},{"product_id":"sea-dog-426460-1-battery-clips-copper-plated-steel-3-in-10a-12vdc-positive-and-negative-pair","title":"Sea-Dog 426460-1 Battery Clips, 12V 10A Copper-Plated Steel, Pair","description":"\u003cp\u003eSea-Dog Battery Clips (426460-1) are spring-loaded clips used for creating temporary electrical connections to a battery or device terminal. The set includes one positive and one negative clip, color coded to avoid polarity misidentification. Each clip is constructed of stamped copper plated steel for better conductivity than uncoated steel, and features an insulated 3 inch handle for a secure, comfortable grip during connection and disconnection.\u003c\/p\u003e\u003cp\u003eRated for 12VDC systems at up to 10 amps, these clips are suited for temporary hookups such as trickle chargers, jump-start leads, test leads, and other low-current accessory connections aboard a boat or in a shop. The copper plating helps maintain reliable current transfer at the contact point, and the spring-loaded jaw design allows a firm clamp onto a battery post or terminal lug.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 426460-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped Copper Plated Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Rating:\u003c\/strong\u003e 10 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Length:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.112 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e One positive clip and one negative clip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514426398\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage are the Sea-Dog 426460-1 battery clips rated for?\u003c\/strong\u003e The Sea-Dog 426460-1 battery clips are rated for 10 amps at 12 VDC, suitable for temporary low-current connections such as chargers and test leads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many clips come in the 426460-1 set?\u003c\/strong\u003e One positive clip and one negative clip are included, color coded to avoid polarity misidentification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are these battery clips made from?\u003c\/strong\u003e The 426460-1 clips are constructed of stamped copper plated steel, which provides better conductivity than uncoated steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the handle on the Sea-Dog 426460-1 battery clip?\u003c\/strong\u003e Each clip has an insulated handle measuring 3 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the Sea-Dog 426460-1 clips spring loaded?\u003c\/strong\u003e Yes, the 426460-1 battery clips are spring loaded to create a secure temporary electrical connection at a battery or device terminal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 426460-1 battery clips be used for jump starting?\u003c\/strong\u003e These clips are designed for temporary electrical connections such as trickle charging and test leads, rated at 12 VDC and up to 10 amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a way to tell the positive and negative clip apart?\u003c\/strong\u003e The 426460-1 clips are color coded specifically to prevent polarity misidentification between the positive and negative connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the Sea-Dog 426460-1 battery clips?\u003c\/strong\u003e The pair of 426460-1 battery clips weighs 0.112 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the Sea-Dog 426460-1 clips have insulated handles?\u003c\/strong\u003e Yes, each 3 inch handle is insulated for a secure and comfortable grip when making or breaking the connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage system are these battery clips designed for?\u003c\/strong\u003e The 426460-1 battery clips are rated for 12 VDC systems.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988813951195,"sku":"S-D-426460-1","price":3.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8278.jpg?v=1784429557"},{"product_id":"sea-dog-426808-1-terminal-post-with-cover-5-16-18-stud-nylon-stainless-steel-48vdc-150a-abyc-uscg","title":"Sea-Dog Terminal Post 426808-1, 5\/16-18 Stud with Nylon Cover, 48VDC 150A","description":"\u003cp\u003eThe Sea-Dog Terminal Post 426808-1 is a marine-grade battery connection stud built to meet ABYC\/USCG requirements for covered terminal connections. It combines a stainless steel terminal stud with an injection molded nylon body and includes a protective cover, giving you a corrosion-resistant, insulated connection point for battery cables, bus systems, and other high-current wiring runs aboard a boat. The stud size is 5\/16-18, and the terminal post mounts to a panel or bulkhead using four #10 RH fasteners (not included).\u003c\/p\u003e\u003cp\u003eRated for a maximum of 48VDC at 150A, this terminal post is sized for demanding 12V, 24V, and 48V marine electrical systems where a secure, weatherproof stud connection is needed. The nylon housing resists saltwater corrosion and electrical arcing better than exposed metal studs, while the included cover keeps the live connection protected from accidental contact and spray. Overall footprint dimensions are 3-3\/4 inches by 1-11\/16 inches, with a post height of 1-5\/8 inches, a base thickness of 1-5\/16 inches, and a mounting hole spacing of 2-3\/16 inches.\u003c\/p\u003e\u003cp\u003eThis terminal post is a universal marine electrical component, suitable for battery banks, distribution posts, bus bars, and any panel application calling for a covered, ABYC\/USCG-compliant 5\/16-18 stud terminal.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 426808-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Nylon\/Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Thread Size:\u003c\/strong\u003e 5\/16-18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Fastener:\u003c\/strong\u003e #10 RH (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (Length):\u003c\/strong\u003e 3-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C (Post Height):\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E (Mounting Spacing):\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Rating:\u003c\/strong\u003e 48VDC, 150A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.10 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e Meets ABYC\/USCG cover requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514427586\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal marine electrical application; not specific to a single make, model, or engine.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part number.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat stud size does the Sea-Dog 426808-1 terminal post use?\u003c\/strong\u003e The Sea-Dog Terminal Post 426808-1 uses a 5\/16-18 threaded stud for the battery or bus connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this terminal post ABYC\/USCG compliant?\u003c\/strong\u003e Yes, the 426808-1 includes a protective cover so the assembly meets ABYC\/USCG requirements for covered terminal connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum voltage and current rating for part 426808-1?\u003c\/strong\u003e It is rated for a maximum of 48VDC at 150A, making it suitable for 12V, 24V, and 48V marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 426808-1 terminal post made from?\u003c\/strong\u003e This terminal post is constructed of injection molded nylon combined with a stainless steel terminal stud.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 426808-1 terminal post mounted?\u003c\/strong\u003e It installs using four #10 RH fasteners, which are not included with the terminal post.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 426808-1 come with a cover?\u003c\/strong\u003e Yes, the Sea-Dog Terminal Post 426808-1 includes a cover as part of the assembly to protect the live connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this terminal post?\u003c\/strong\u003e Part 426808-1 measures 3-3\/4 inches by 1-11\/16 inches overall, with a 1-5\/8 inch post height, a 1-5\/16 inch base dimension, and 2-3\/16 inch mounting hole spacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 426808-1 terminal post weigh?\u003c\/strong\u003e The 426808-1 terminal post weighs 0.10 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this terminal post work with any boat or is it model-specific?\u003c\/strong\u003e The 426808-1 is a universal marine electrical terminal post and is not restricted to a specific boat make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 426808-1 and the 426810-1 terminal post?\u003c\/strong\u003e The 426808-1 uses a 5\/16-18 stud, while the 426810-1 uses a larger 3\/8-16 stud; both share the same overall body dimensions and mounting pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the mounting fasteners included with the 426808-1?\u003c\/strong\u003e No, the four #10 RH fasteners needed to mount the 426808-1 terminal post are not included and must be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs nylon a durable material for a marine battery terminal post?\u003c\/strong\u003e The injection molded nylon housing on the 426808-1 resists saltwater corrosion, making it a durable choice compared to exposed metal terminal hardware.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988814082267,"sku":"S-D-426808-1","price":9.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5113.jpg?v=1784429574"},{"product_id":"sea-dog-3-8-battery-terminal-post-with-cover-48vdc-150a-abyc-uscg-compliant-nylon-stainless-steel-mpn-426810-1","title":"Sea-Dog Terminal Post 3\/8-16, Nylon\/Stainless Steel with ABYC Cover - 426810-1","description":"\u003cp\u003eThe Sea-Dog Terminal Post 426810-1 is a 3\/8-16 stud terminal built for marine battery and buss connections where a secure, corrosion-resistant post is required. It is constructed of injection molded nylon paired with a stainless steel terminal, giving it the strength to handle heavy electrical loads while resisting the corrosive effects of a marine environment. The post is rated for a maximum of 48VDC and 150A, making it suitable for a range of 12V, 24V, and 48V DC systems on board.\u003c\/p\u003e\u003cp\u003eEach terminal post ships with a cover that allows it to meet ABYC and USCG requirements for terminal protection, helping keep the connection safe from accidental contact and corrosion. Installation is straightforward: the post mounts using four #10 RH fasteners (fasteners not included), so it can be panel- or bulkhead-mounted into an existing electrical setup. Its compact footprint keeps it easy to fit into tight battery boxes, distribution panels, or buss bar assemblies.\u003c\/p\u003e\u003cp\u003eThis terminal post is sold in a standard pack of 5 and is one of several thread sizes in the same Sea-Dog terminal post series, so boat owners and marine electricians can match the stud size to their existing hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 426810-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/8-16\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #10 RH (installs with four #10 RH fasteners, not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon \/ Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 48 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Current:\u003c\/strong\u003e 150 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 3-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.11 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514427609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e Meets ABYC\/USCG requirements (includes terminal post cover)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size is the Sea-Dog 426810-1 terminal post?\u003c\/strong\u003e It has a 3\/8-16 stud thread, which is the largest of the three plain terminal post sizes in this Sea-Dog series (the others use 1\/4-20 and 5\/16-18 studs).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this terminal post made of?\u003c\/strong\u003e The 426810-1 is built from injection molded nylon combined with a stainless steel terminal, giving it corrosion resistance for marine electrical use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the terminal post come with a cover?\u003c\/strong\u003e Yes, the 426810-1 includes a cover so the installed terminal meets ABYC and USCG requirements for terminal protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and current is this terminal post rated for?\u003c\/strong\u003e Sea-Dog rates the 426810-1 for a maximum of 48VDC and 150A, covering typical 12V, 24V, and 48V DC marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 426810-1 terminal post installed?\u003c\/strong\u003e It installs with four #10 RH fasteners, which are not included, allowing it to be mounted to a panel, bulkhead, or buss bar assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 426810-1?\u003c\/strong\u003e The terminal post measures 3-3\/4 inches by 1-11\/16 inches by 1-5\/8 inches by 1-5\/16 inches by 2-3\/16 inches across its mounting profile (dimensions A through E).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 426810-1 terminal post weigh?\u003c\/strong\u003e The Sea-Dog 426810-1 terminal post weighs 0.11 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminal posts come in a pack?\u003c\/strong\u003e The 426810-1 is sold in a standard pack of 5 units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 426810-1 and the 426808-1 or 426806-1?\u003c\/strong\u003e All three are the same Sea-Dog terminal post design with a cover, but they differ in stud thread: 426806-1 uses a 1\/4-20 stud, 426808-1 uses a 5\/16-18 stud, and 426810-1 uses the larger 3\/8-16 stud.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a replacement cover available if the original terminal post cover is lost or damaged?\u003c\/strong\u003e Yes, Sea-Dog offers a standalone terminal post cover (426800) that fits this style of terminal post.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 426810-1 terminal post?\u003c\/strong\u003e The UPC for the Sea-Dog 426810-1 terminal post is 035514427609.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988814180571,"sku":"S-D-426810-1","price":10.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5113_0004c413-a2a8-4137-ba14-ea514f6e8ae3.jpg?v=1784429584"},{"product_id":"blue-sea-systems-2018-powerpost-dual-cable-connector-5-16-3-8-high-amperage-battery-post-for-outboard-engine-cable-extensions-48v-dc","title":"Blue Sea Systems PowerPost Insulated Battery Terminal Post 2018, 5\/16 Inch and 3\/8 Inch Studs, 48V DC","description":"\u003cp\u003eThe Blue Sea Systems PowerPost 2018 is an insulated battery terminal post connector designed for connecting high amperage conductors on a boat's electrical system. It is built to accept both 5\/16 inch and 3\/8 inch stud connections, giving installers flexibility when stacking multiple ring terminals on a single post. The 2018 is also designed for outboard engine installation, making it a practical choice when factory battery cables need to be extended to reach a relocated battery or accessory panel.\u003c\/p\u003e\u003cp\u003eEach PowerPost uses one-piece serrated flange nuts that bite into the ring terminal for a correct, secure, and vibration-resistant connection, reducing the chance of a loose terminal working free over time. The connector body is molded from blue plastic for corrosion resistance and easy circuit identification, while the post and contact surfaces are copper for reliable conductivity. The connector is not amperage-rated as a standalone part; the amperage that flows between terminals stacked on the post is determined by the gauge of wire and the terminals used in the connection. It carries a maximum operating voltage of 48 volts DC and uses #10 (M5) screws.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2018\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Sizes:\u003c\/strong\u003e 5\/16 Inch and 3\/8 Inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Size:\u003c\/strong\u003e #10 (M5)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Voltage:\u003c\/strong\u003e 48 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Rating:\u003c\/strong\u003e Not rated - amperage flows between terminals stacked on post and is determined by wire and terminals used\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Rating:\u003c\/strong\u003e 257 degrees Fahrenheit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.35 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085020187\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal marine battery post application; suited to outboard engine installations where factory cables need extending, and to any 12 volt or lower DC system where the maximum 48 volt DC operating rating is not exceeded.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Blue Sea Systems PowerPost 2018 used for?\u003c\/strong\u003e The PowerPost 2018 connects high amperage conductors at a single terminal post, and it is also designed for outboard engine installations where factory battery cables need to be extended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat stud sizes does the 2018 PowerPost accept?\u003c\/strong\u003e It accepts both 5\/16 inch and 3\/8 inch stud connections, so ring terminals sized for either stud can be stacked on the same post.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PowerPost 2018 amperage rated?\u003c\/strong\u003e No, the connector itself is not amperage-rated. The amperage that flows between terminals stacked on the post is determined by the wire gauge and terminals used in the connection, not by the PowerPost 2018 body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum voltage rating of the 2018 connector?\u003c\/strong\u003e The Blue Sea Systems 2018 has a maximum operating voltage of 48 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat screw size does the PowerPost 2018 use?\u003c\/strong\u003e It uses #10 (M5) screws for securing terminal connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do the flange nuts on the 2018 keep connections secure?\u003c\/strong\u003e One-piece serrated flange nuts bite into the ring terminal, ensuring a correct and secure connection that resists loosening from vibration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the PowerPost 2018 made from?\u003c\/strong\u003e The body is blue plastic for corrosion resistance and circuit identification, while the contact surfaces are copper for reliable conductivity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 2018 weigh?\u003c\/strong\u003e The PowerPost 2018 weighs 0.35 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can the 2018 connector handle?\u003c\/strong\u003e It carries a temperature rating of 257 degrees Fahrenheit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the PowerPost 2018 be used to extend outboard engine battery cables?\u003c\/strong\u003e Yes, the 2018 is specifically designed for outboard engine installation when factory cables need to be extended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 2018 PowerPost come with cross-reference or OEM replacement numbers?\u003c\/strong\u003e No OEM cross-reference numbers are listed for the Blue Sea Systems 2018 PowerPost connector.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989477830875,"sku":"BSS-2018","price":26.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2018.jpg?v=1784507345"},{"product_id":"blue-sea-systems-3000-hd-series-heavy-duty-on-off-battery-switch-600a-continuous-grey","title":"Blue Sea Systems 3000 Single Circuit ON-OFF Battery Switch, 600 Amp, Grey","description":"\u003cp\u003eThe Blue Sea Systems 3000 is an HD-Series Single Circuit ON-OFF battery switch that connects a single battery to a single load group. It is built for marine electrical systems that need reliable, heavy-duty disconnect control at the helm or in the engine compartment. The switch carries a 600 Amp continuous current rating at up to 32 Volts DC and accepts two 4\/0 AWG (95 mm2) battery cables using 1\/2 inch terminal studs, making it suitable for high-current DC circuits found on larger boats.\u003c\/p\u003e\u003cp\u003eConstruction is a Grey plastic housing with copper contacts, mounted via a panel-mount rotary actuator with 2 positions (ON and OFF). The switch carries an IP66 waterproof rating and meets ISO 8846 marine switch standards, and it is ignition protected, meaning it is safe to install aboard gasoline powered boats without creating a spark ignition hazard around fuel vapors. It also meets ABYC (American Boat and Yacht Council) requirements for marine electrical installations.\u003c\/p\u003e\u003cp\u003eThis is the standard Single Circuit ON-OFF version without Alternator Field Disconnect (AFD). Blue Sea Systems also offers this same switch configuration with AFD as a separate model, which protects the alternator's diodes if the switch is turned to the OFF position while the engine is still running.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 3000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Single Circuit ON-OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Current Rating:\u003c\/strong\u003e 600 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 32 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Stud Size:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Acceptance:\u003c\/strong\u003e Two 4\/0 AWG (95 mm2) battery cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e ISO 8846\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protected:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Rotary\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9 x 7 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085030001\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 3000 battery switch do?\u003c\/strong\u003e It is a Single Circuit ON-OFF battery switch that connects or disconnects a single battery from a single load group, giving a simple, heavy-duty disconnect point for a marine DC electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 3000 safe to install in a gasoline powered boat?\u003c\/strong\u003e Yes, the 3000 switch is ignition protected, which means it is designed not to create a spark ignition source and is safe for installation aboard gasoline powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current and voltage rating of the 3000 switch?\u003c\/strong\u003e The Blue Sea Systems 3000 carries a 600 Amp continuous current rating at up to 32 Volts DC, suitable for heavy-duty marine battery circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size battery cables does the 3000 switch accept?\u003c\/strong\u003e It accepts two 4\/0 AWG (95 mm2) battery cables, terminating on 1\/2 inch terminal studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 3000 waterproof?\u003c\/strong\u003e The 3000 switch has an IP66 waterproof rating and meets the ISO 8846 standard for marine switches, and it also meets ABYC requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Blue Sea Systems 3000 battery switch made from?\u003c\/strong\u003e The housing is Grey plastic with copper contacts, and the switch uses a panel-mount rotary actuator with 2 positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 3000 weigh?\u003c\/strong\u003e The 3000 battery switch weighs 1.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the Blue Sea Systems 3000?\u003c\/strong\u003e Item dimensions for the 3000 switch are 9 x 7 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Blue Sea Systems 3000 and 3001 switches?\u003c\/strong\u003e Both the 3000 and 3001 are Single Circuit ON-OFF battery switches, but the 3001 adds Alternator Field Disconnect (AFD), which protects the alternator's diodes if the switch is turned to OFF while the engine is running. The 3000 does not include this AFD feature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many positions does the Blue Sea Systems 3000 switch have?\u003c\/strong\u003e The 3000 is a 2-position switch: ON and OFF.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Blue Sea Systems 3000 mount on a panel?\u003c\/strong\u003e Yes, the 3000 uses a panel-mount design with a rotary actuator for switching between ON and OFF.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with the Blue Sea Systems 3000 battery switch?\u003c\/strong\u003e The Blue Sea Systems 3000 Single Circuit ON-OFF battery switch carries UPC 632085030001.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989490348251,"sku":"BSS-3000","price":103.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3000.jpg?v=1784507393"},{"product_id":"blue-sea-systems-3002-heavy-duty-4-position-battery-selector-switch-500a-continuous-ignition-protected-ip66","title":"Blue Sea Systems 3002 Heavy-Duty 4-Position Battery Selector Switch, 500A Continuous","description":"\u003cp\u003eThe Blue Sea Systems 3002 is a heavy-duty, 4-position battery selector switch built to isolate battery banks from all loads or combine battery banks to power all loads aboard a boat. Turning the rotary knob to OFF, 1, 2, or BOTH lets the operator control exactly how the battery banks connect to the vessel's electrical system, which is essential for isolating a cranking battery from house loads or combining banks in an emergency.\u003c\/p\u003e\u003cp\u003eThe switch is ignition protected, making it safe for installation aboard gasoline-powered boats, and it carries an IP66 rating so it is protected against powerful water jets in an open engine compartment or helm station. A tactile indicator lets the operator feel the knob's position without needing to see it, which is useful in low light or when reaching the switch by feel. The housing is constructed of plastic with tin-plated copper contacts, and the switch accepts two 4\/0 AWG (95 mm squared) battery cables per terminal on 1\/2 inch terminal studs. An Icon Circuit Identification Label Kit (7902) is available separately for labeling the switch positions to match the vessel's specific circuits.\u003c\/p\u003e\u003cp\u003eThe 3002 is rated for a continuous current of 500 amps, an intermittent (5 minute) rating of 700 amps, and a cranking rating of 1,600 amps for 30 seconds, at a maximum operating voltage of 32 volts DC. It is panel mounted and meets CE marking, ISO 8846, UL 1107, ABYC, UL 1500, and SAE J1171 external ignition protection requirements, making it suitable for use as a primary battery selector switch on gasoline or diesel powered boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 3002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Heavy-Duty Battery Selector Switch, 4-Position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 500 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Rating (5 min):\u003c\/strong\u003e 700 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCranking Rating (30 sec):\u003c\/strong\u003e 1,600 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Voltage:\u003c\/strong\u003e 32 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Stud Size:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Capacity:\u003c\/strong\u003e Two 4\/0 AWG (95 mm squared) battery cables per terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulatory Compliance:\u003c\/strong\u003e CE marked, ISO 8846, UL Listed (UL 1107), meets ABYC requirements, meets UL 1500 and SAE J1171 external ignition protection requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Tin-plated Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Beige\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 9 x 6 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessory:\u003c\/strong\u003e Icon Circuit Identification Label Kit 7902 (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 3002 battery switch do?\u003c\/strong\u003e It switches isolated battery banks to all loads or combines battery banks to power all loads, letting the operator control which batteries are connected to the boat's electrical system via a 4-position rotary knob (OFF, 1, 2, BOTH).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 3002 safe to install on a gasoline powered boat?\u003c\/strong\u003e Yes. The 3002 is ignition protected and meets UL 1500 and SAE J1171 external ignition protection requirements, so it is rated for installation aboard gasoline-powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the continuous amperage rating of the 3002 switch?\u003c\/strong\u003e The Blue Sea Systems 3002 is rated for 500 amps continuous, 700 amps intermittent for 5 minutes, and 1,600 amps cranking for 30 seconds, at a maximum operating voltage of 32 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size battery cables does the 3002 accept?\u003c\/strong\u003e Each terminal on the 3002 accepts two 4\/0 AWG (95 mm squared) battery cables, with a terminal stud size of 1\/2 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the switch waterproof?\u003c\/strong\u003e The 3002 carries an IP66 rating, meaning it is protected against powerful water jets, and it is also rated to ISO 8846 for marine ignition protection standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 3002 switch made of?\u003c\/strong\u003e The housing is constructed of plastic with tin-plated copper contacts inside the switch mechanism.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know what position the 3002 knob is in without looking?\u003c\/strong\u003e The Blue Sea Systems 3002 has a tactile indicator built into the knob that conveys its position by feel, so the operator can identify OFF, 1, 2, or BOTH without needing to see the switch face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 3002 battery switch weigh?\u003c\/strong\u003e It weighs 1.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 3002?\u003c\/strong\u003e The 3002 measures 9 x 6 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 3002 different from Blue Sea Systems' 3000 and 3001 switches?\u003c\/strong\u003e The 3002 is rated for 500 amps continuous, 700 amps intermittent, and 1,600 amps cranking, while the 3000 and 3001 switches are rated higher at 600 amps continuous, 900 amps intermittent, and 1,750 amps cranking; both share the same 32 volt DC maximum operating voltage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I label the switch positions for my specific battery banks?\u003c\/strong\u003e Yes, the Icon Circuit Identification Label Kit (part number 7902) is available separately and can be used to label the 3002's switch positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Blue Sea Systems part?\u003c\/strong\u003e Yes, this is the genuine Blue Sea Systems 3002 heavy-duty 4-position battery selector switch, not an aftermarket equivalent.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989490905307,"sku":"BSS-3002","price":130.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3002.jpg?v=1784507001"},{"product_id":"blue-sea-systems-6004-m-series-on-off-battery-switch-with-locking-key-red-300a-continuous-ignition-protected","title":"Blue Sea Systems 6004 m-Series Battery Disconnect Switch with Locking Key, Red, 300 Amp Continuous","description":"\u003cp\u003eThe Blue Sea Systems 6004 is an on\/off battery disconnect switch built to manage a single battery connected to a single load group on a boat's DC electrical system. It uses a removable locking key so the operator can pull the knob and lock out the circuit, helping prevent accidental current flow or unauthorized use while the boat is unattended or during electrical service. The switch is ignition protected, making it suitable for mounting inside the engine room of gasoline powered boats where protected components are required. Its compact housing supports three mounting options -- surface, rear, or front mount -- so it can be fitted into tight panel layouts or limited engine room space, and breakout tabs on the housing allow wiring to be routed from any direction. Connections are made through one-piece, tin-plated copper terminal studs measuring 7\/8 inch, sized to accept multiple cables for a secure, corrosion-resistant connection. Electrically, the 6004 is rated for 300 amps continuous duty, 500 amps intermittent (5 minute), and 900 amps cranking (30 second), at up to 48 volts DC. The 6004 does not ship with the 6-circuit label set included on some other switches in the same family; buyers who want circuit labeling can add the Icon Circuit Identification Label Kit (7902), sold separately. It is finished in red and backed by a lifetime warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6004\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e On\/Off Battery Disconnect Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e OFF-NONE-ON with removable locking key\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 300 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Rating (5 minute):\u003c\/strong\u003e 500 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCranking Rating (30 second):\u003c\/strong\u003e 900 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Voltage:\u003c\/strong\u003e 48 volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface, rear, or front mount (panel mount)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Studs:\u003c\/strong\u003e One-piece, tin-plated copper, 7\/8 inch, accept multiple cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Suitable for engine rooms of gasoline powered boats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7 x 4 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.65 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085060046\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 6004 battery switch do?\u003c\/strong\u003e The 6004 is an on\/off disconnect switch that manages a single battery connected to a single load group, letting the operator fully cut DC power with a removable locking key to prevent accidental or unauthorized current flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of the 6004 switch?\u003c\/strong\u003e It is rated for 300 amps continuous, 500 amps intermittent over 5 minutes, and 900 amps cranking over 30 seconds, at up to 48 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 6004 be mounted in an engine room with a gasoline engine?\u003c\/strong\u003e Yes, the 6004 is ignition protected, so it can be installed in the engine room of a gasoline powered boat where protected electrical components are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting options does the 6004 support?\u003c\/strong\u003e Surface, rear, or front mounting are all supported, giving flexibility to fit the switch into different panel layouts or tight engine room spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 6004 include a locking key?\u003c\/strong\u003e Yes, the Blue Sea Systems 6004 has a removable knob with a locking key so the switch can be locked in the off position during service or when the boat is unattended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the terminal studs on the 6004?\u003c\/strong\u003e The 6004 uses one-piece, tin-plated copper terminal studs measuring 7\/8 inch, sized to accept multiple cables for a secure connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 6004 come with circuit labels?\u003c\/strong\u003e No, the 6-circuit label set that ships with some other switches in this family is not included with the 6004; the Icon Circuit Identification Label Kit (7902) is available separately for labeling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 6004 switch?\u003c\/strong\u003e The Blue Sea Systems 6004 is finished in red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 6004 battery switch weigh?\u003c\/strong\u003e It weighs 0.65 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 6004?\u003c\/strong\u003e The 6004 measures 7 x 4 x 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 6004 switch housing made of?\u003c\/strong\u003e The housing is plastic, paired with tin-plated copper terminal studs for the electrical connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 6004 covered by a warranty?\u003c\/strong\u003e Yes, the Blue Sea Systems 6004 is backed by a lifetime warranty.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989505061083,"sku":"BSS-6004","price":40.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6004.jpg?v=1784507118"},{"product_id":"blue-sea-systems-5511e-e-series-dual-circuit-plus-battery-switch-350a-32v-dc-dual-battery-bank-on-off-combine-ip66-ignition-protected","title":"Blue Sea Systems e-Series Dual Circuit Plus Battery Switch 5511E, 350A, 32V DC, Dual Battery Bank","description":"\u003cp\u003eThe Blue Sea Systems e-Series Dual Circuit Plus Battery Switch, part number 5511E, is a dual battery bank switch built for inboard and outboard powered boats running alternators up to 120A. It switches two battery banks simultaneously while maintaining battery bank isolation, and lets the operator combine the two banks together in the event of a low start battery. The switch's compact design makes it practical to install in tight spaces, and it offers multiple mounting options, including surface mount or mounting to the rear of a panel. It is ignition protected, so it can be installed in the engine room of a gasoline powered boat.\u003c\/p\u003e\u003cp\u003eElectrical connections are made through one piece copper studs measuring 7\/8 inch long, which accept multiple cable connections and hold up to the tinned copper contacts inside the switch for a secure electrical path. The switch operates in ON-OFF-COMBINE mode through a rotary actuator with a normally closed contact type, and the face has tactile textures so the operator can identify the switch position by feel in low light or no light conditions. The housing carries an IP66 rating, protecting the switch against powerful water jets. This model does not include an alternator field disconnect.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5511E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rotary\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e ON-OFF-COMBINE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 350 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 32 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Stud\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Length:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Tinned Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3.85 x 3.85 x 3.1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 2-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount, Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Alternator Rating:\u003c\/strong\u003e 120 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085551155\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 5511E battery switch do?\u003c\/strong\u003e The 5511E is an e-Series Dual Circuit Plus battery switch that controls two battery banks at once. It can switch both banks simultaneously while keeping them isolated from each other, or combine them together when a start battery is low.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 5511E switch safe for a gasoline engine room?\u003c\/strong\u003e Yes, the 5511E is ignition protected, which means it is rated for installation in the engine room of a gasoline powered boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current and voltage rating of the 5511E?\u003c\/strong\u003e The Blue Sea Systems 5511E is rated for 350 Amps at 32 Volts DC, and it is intended for use with alternators up to 120A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the 5511E battery switch?\u003c\/strong\u003e The 5511E measures 3.85 x 3.85 x 3.1 inches and weighs 1.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 5511E battery switch mounted?\u003c\/strong\u003e The 5511E can be surface mounted or mounted to the rear of a panel, giving flexibility for installation in tight spaces aboard a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of wire connections does the 5511E use?\u003c\/strong\u003e The 5511E uses one piece copper studs measuring 7\/8 inch long that accept multiple cable connections, with tinned copper contacts inside the switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5511E have an alternator field disconnect?\u003c\/strong\u003e No, the Blue Sea Systems 5511E does not include an alternator field disconnect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat switch positions does the 5511E offer?\u003c\/strong\u003e The 5511E is a rotary switch with two positions operating in ON-OFF-COMBINE mode, allowing the two battery banks to be switched together or isolated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow water resistant is the 5511E battery switch?\u003c\/strong\u003e The 5511E carries an IP66 rating, meaning it is protected against powerful water jets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the switch position be identified in the dark?\u003c\/strong\u003e Yes, the 5511E has tactile textures on its face so the switch position can be felt and operated in low light or no light conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 5511E battery switch?\u003c\/strong\u003e The Blue Sea Systems 5511E is red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the 5511E battery switch designed for?\u003c\/strong\u003e The 5511E is designed as a battery bank solution for both inboard and outboard powered boats.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989505126619,"sku":"BSS-5511E","price":71.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5511e_1__55625.1739460505.500.750.jpg?v=1785329072"},{"product_id":"blue-sea-systems-6006-m-series-on-off-battery-switch-with-removable-red-knob-32v-dc-300a-continuous-ignition-protected","title":"Blue Sea Systems m-Series Battery Switch 6006, ON\/OFF with Removable Knob, 300A Continuous, 48V DC, Red","description":"\u003cp\u003eThe Blue Sea Systems 6006 is an m-Series battery switch built to control power to a single battery and a single load group aboard a boat. Its compact housing supports installation in tight electrical panels or engine room spaces where mounting room is limited, and it can be installed by surface mounting or by front or rear panel mounting depending on the layout of the installation.\u003c\/p\u003e\u003cp\u003eThe switch uses a rotary ON\/OFF design operated with a removable knob. Taking the knob off the shaft helps prevent accidental current flow while work is being done on the DC electrical system, adding a layer of safety during service or storage. The switch face is designed for use in low light, and the unit carries ignition protection, making it suitable for mounting in the engine rooms of gasoline powered boats where protected electrical components are required.\u003c\/p\u003e\u003cp\u003eConnections are made through one-piece, tin plated copper studs measuring 7\/8 inch, sized to accept multiple cables at a single connection point for a durable, corrosion-resistant electrical joint. The 6006 is rated for a maximum operating voltage of 48V DC, with a 300 amp continuous rating, a 500 amp intermittent rating for 5 minutes, and a 900 amp cranking rating for 30 seconds. It is CE marked, ISO 8846 compliant, UL Listed to UL 1107 for electric power switches, and meets American Boat and Yacht Council (ABYC) requirements. An Icon Circuit Identification Label Kit is available separately for labeling this switch and other circuits on the panel.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6006\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rotary, manual ON\/OFF with removable knob\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Configuration:\u003c\/strong\u003e Single battery, single load group, 2-position (On\/Off)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCranking Rating:\u003c\/strong\u003e 900 Amps (30 seconds)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Rating:\u003c\/strong\u003e 500 Amps (5 minutes)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 300 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Voltage:\u003c\/strong\u003e 48 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 14400 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Studs:\u003c\/strong\u003e One-piece tin plated copper, 7\/8 inch, accepts multiple cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface, front panel, or rear panel mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Yes, suitable for gasoline engine rooms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine grade metals, polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3 x 4 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulatory:\u003c\/strong\u003e CE marked, ISO 8846, UL Listed (UL 1107), meets ABYC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085060060\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the continuous current rating of the Blue Sea Systems 6006 battery switch?\u003c\/strong\u003e The 6006 is rated for 300 amps continuous, with a 500 amp intermittent rating for 5 minutes and a 900 amp cranking rating for 30 seconds, all at a maximum of 48 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the knob be removed from the 6006 switch?\u003c\/strong\u003e Yes, the 6006 features a removable knob that, once taken off, helps prevent accidental current flow in the DC system, which is useful during electrical service work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 6006 safe to install in a gasoline engine room?\u003c\/strong\u003e Yes, the 6006 carries ignition protection, making it suitable for installation in the engine rooms of gasoline powered boats where protected electrical components are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 6006 battery switch mounted?\u003c\/strong\u003e It supports surface mounting, front panel mounting, or rear panel mounting, giving flexibility to fit different panel layouts and installation spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size cables can connect to the 6006?\u003c\/strong\u003e The 6006 uses one-piece, tin plated copper studs measuring 7\/8 inch that are sized to accept multiple cables at each connection point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the 6006 battery switch?\u003c\/strong\u003e The Blue Sea Systems 6006 measures 3 x 4 x 6 inches and weighs 0.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 6006 battery switch used for?\u003c\/strong\u003e It is used to control power to a single battery and a single load group, letting a boat owner manually turn the battery connection on or off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 6006 meet marine safety and regulatory standards?\u003c\/strong\u003e Yes, the 6006 is CE marked, complies with ISO 8846, is UL Listed to UL 1107 for electric power switches, and meets American Boat and Yacht Council (ABYC) requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 6006 switch made of?\u003c\/strong\u003e The 6006 is constructed of marine grade metals and polycarbonate, with tin plated copper terminal studs for the electrical connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a labeling accessory available for the 6006?\u003c\/strong\u003e An Icon Circuit Identification Label Kit is available as a separate accessory for labeling the 6006 and other circuits on an electrical panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Blue Sea Systems 6006 switch?\u003c\/strong\u003e The 6006 is finished in red.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989505683675,"sku":"BSS-6006","price":36.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6006.jpg?v=1784507126"},{"product_id":"blue-sea-systems-6005-m-series-battery-switch-on-off-with-removable-key-300a-continuous-48v-dc-marine-battery-disconnect","title":"Blue Sea Systems m-Series Battery Switch with Key, Part 6005, 48V DC, 300A Continuous","description":"\u003cp\u003eThe Blue Sea Systems m-Series Battery Switch, part number 6005, is a key-operated battery switch built for boats that need reliable manual control over DC circuit power. Unlike knob-operated switches in the m-Series line, the 6005 uses a key for operation, which supports controlled access to the switch position and helps prevent unintended power flow when the key is removed. It is rated for a 900 amp cranking load for 30 seconds, a 500 amp intermittent load for 5 minutes, and a 300 amp continuous load, with a maximum operating voltage of 48 volts DC, making it suited to demanding DC power distribution tasks on board.\u003c\/p\u003e\u003cp\u003eThe switch includes breakout tabs that allow wire access in any direction, giving installers flexibility when routing cables to the switch during installation. A 6-circuit label set is not included with the 6005, so installers who want printed circuit labeling will need to source that separately; an Icon Circuit Identification Label Kit, part number 7902, is available as a separate accessory for circuit identification.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6005\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Operation:\u003c\/strong\u003e Key-operated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCranking Rating (30 seconds):\u003c\/strong\u003e 900 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Rating (5 minutes):\u003c\/strong\u003e 500 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 300 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Voltage:\u003c\/strong\u003e 48 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.62 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085060053\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Label Set Included:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Access:\u003c\/strong\u003e Breakout tabs allow wire access in any direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Accessory:\u003c\/strong\u003e Icon Circuit Identification Label Kit, part number 7902 (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 6005 battery switch key-operated or knob-operated?\u003c\/strong\u003e The 6005 is a key-operated battery switch, distinguishing it from knob-operated switches elsewhere in the Blue Sea Systems m-Series lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum operating voltage of the 6005 battery switch?\u003c\/strong\u003e 48 Volts DC is the maximum operating voltage for the Blue Sea Systems 6005.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much current can the 6005 battery switch handle?\u003c\/strong\u003e The 6005 is rated for a 900 amp cranking load for 30 seconds, a 500 amp intermittent load for 5 minutes, and a 300 amp continuous load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 6005 battery switch come with circuit labels?\u003c\/strong\u003e No, a 6-circuit label set is not included with the Blue Sea Systems 6005; it is included with some other switches in the m-Series line but not this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I add circuit identification labels to the 6005 separately?\u003c\/strong\u003e Yes, the Icon Circuit Identification Label Kit, part number 7902, is available as a separate accessory for use with the 6005 battery switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 6005 weigh?\u003c\/strong\u003e The 6005 battery switch weighs 0.62 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does wire routing work with the 6005 battery switch?\u003c\/strong\u003e The 6005 has breakout tabs that allow wire access in any direction, giving flexibility when routing cables during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Blue Sea Systems 6005 battery switch?\u003c\/strong\u003e The UPC for the Blue Sea Systems 6005 battery switch is 632085060053.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 6005 the same switch as the Blue Sea Systems 6006?\u003c\/strong\u003e No, the 6005 and 6006 are different parts; the 6005 is key-operated with a 48 Volt DC maximum rating, while the 6006 is a separate model with a knob-operated design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the 6005 battery switch?\u003c\/strong\u003e The 6005 battery switch is manufactured by Blue Sea Systems.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989505716443,"sku":"BSS-6005","price":36.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6005.jpg?v=1784507122"},{"product_id":"blue-sea-systems-6008-m-series-mini-battery-selector-switch-3-position-off-none-on-red-300a-continuous-ignition-protected","title":"Blue Sea Systems 6008 m-Series Mini 3-Position Battery Switch, Red","description":"\u003cp\u003eThe Blue Sea Systems 6008 is a compact m-Series Mini battery switch built to manage a single battery connected to a single load group aboard a boat. Its small footprint and three available mounting options (surface, flush, or rear-of-panel mounting) let it fit into tight helm stations or engine room panels where space is limited. The switch includes an emergency combine feature that lets you draw power from both batteries during engine starting or when running essential electronics, which is useful if one battery bank runs low. A make-before-break contact design allows switching between battery banks without a power interruption, helping maintain continuity to connected loads during the transition.\u003c\/p\u003e\u003cp\u003eBecause it carries ignition protection, the 6008 is suitable for mounting in the engine room of gasoline-powered boats, including locations that require ignition-protected components. The switch face has a tactile surface, and the knob is removable, which supports safe operation in low-light conditions and helps prevent unintended power flow while servicing the electrical system. The terminal studs are tin-plated copper, built as a single piece, and sized to accept multiple cable connections while keeping the fastening secure. The switch is finished in red and rated for a 300 amp continuous load per circuit, making it a straightforward option for basic single-battery, single-load-group control on boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6008\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e m-Series Mini Battery Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 3 (OFF-NONE-ON)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 300 Amps per circuit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 48 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch\/Actuator Type:\u003c\/strong\u003e Rotary\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Design:\u003c\/strong\u003e Make-before-break\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Options:\u003c\/strong\u003e Surface, flush, or rear-of-panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Studs:\u003c\/strong\u003e Tin-plated copper, single-piece construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Yes, suitable for gasoline engine rooms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulatory:\u003c\/strong\u003e CE marked, ISO 8846, UL Listed (UL 1107), meets ABYC standards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7 x 4 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.77 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085060084\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 6008 battery switch do?\u003c\/strong\u003e It manages power flow from a single battery to a single load group, letting you turn the connection OFF or ON, with a combine position to draw from both batteries for engine starting or essential loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 6008 safe to mount in a gasoline engine room?\u003c\/strong\u003e Yes, the 6008 includes ignition protection, so it can be installed in the engine room of gasoline-powered boats in locations that require ignition-protected components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many amps can the 6008 handle continuously?\u003c\/strong\u003e 300 amps per circuit on a continuous basis, which is the rating that applies to the Blue Sea Systems 6008 Mini battery switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the 6008 rated for?\u003c\/strong\u003e The 6008 is rated for 48 volts DC operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting options does the 6008 support?\u003c\/strong\u003e Three mounting methods are available: surface mount, flush mount, or rear-of-panel mount, which makes the 6008 adaptable to different helm or engine room layouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes switching battery banks on the 6008 interrupt power?\u003c\/strong\u003e No, the 6008 uses a make-before-break contact design, so power is not interrupted while switching between battery banks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the terminal connections like on the 6008?\u003c\/strong\u003e The Blue Sea Systems 6008 uses tin-plated copper terminal studs built as a single piece, sized to accept multiple cable connections while keeping fastening secure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 6008 come in?\u003c\/strong\u003e The 6008 is finished in red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the 6008?\u003c\/strong\u003e The 6008 measures 7 x 4 x 4 inches and weighs 0.77 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the knob be removed on the 6008 for security?\u003c\/strong\u003e Yes, the knob on the 6008 is removable, which helps prevent unintended power flow while servicing the boat's electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat regulatory standards does the 6008 meet?\u003c\/strong\u003e The 6008 is CE marked, meets ISO 8846, is UL Listed under UL 1107 for electric power switches, and meets American Boat and Yacht Council (ABYC) requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the 6008 battery switch?\u003c\/strong\u003e The Blue Sea Systems 6008 carries a lifetime warranty.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989505749211,"sku":"BSS-6008","price":71.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6008.jpg?v=1784507135"},{"product_id":"blue-sea-systems-6011-m-series-dual-circuit-plus-battery-switch-300a-red-two-bank-switching-with-emergency-combine","title":"Blue Sea Systems 6011 m-Series Dual Circuit Plus Battery Switch, Red","description":"\u003cp\u003eThe Blue Sea Systems 6011 m-Series Dual Circuit Plus Battery Switch is a compact marine battery switch built to manage two separate battery banks from a single control point. Unlike a basic single-circuit switch, the Dual Circuit Plus design switches both battery banks simultaneously while keeping the two banks electrically isolated from each other, so each bank stays dedicated to its own circuit during normal operation. In an emergency, such as a low or dead start battery, the switch can combine the two banks to provide extra cranking power or to run essential equipment. The make-before-break contact design changes between positions without interrupting power flow, which helps protect sensitive electronics from voltage spikes during switching.\u003c\/p\u003e\u003cp\u003eInstallation is flexible, with three mounting options: surface mount, flush mount, or rear-of-panel mount, allowing it to fit a variety of helm and engine room layouts. Ignition protection is built in, making the switch suitable for installation in the engine room of gasoline-powered boats. The switch face has a tactile surface and a removable knob, which helps with operation in low light and lets you lock out the switch to prevent unintended power flow while servicing the electrical system. Terminal studs are tin-plated copper, formed as a single piece with enough length to accept multiple cable connections and provide a secure fastening point. The housing carries an IP66 rating, meaning it is protected against powerful water jets, an important consideration for equipment mounted in an open engine room or exposed helm station.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6011\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Dual Circuit Plus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e ON-OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 300 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 32 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 9600 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Make Before Break\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Push Button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount (surface, flush, or rear-of-panel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper Temperature Rating:\u003c\/strong\u003e 85 Degrees Celsius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 7 x 4 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085060114\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Vehicle Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dual Circuit Plus design do differently from a standard battery switch?\u003c\/strong\u003e The Blue Sea Systems 6011 switches two battery banks simultaneously while keeping the two banks electrically isolated from each other, rather than simply connecting one battery to one load group. It also includes a combine feature to draw power from both banks together when needed, such as for engine starting or running essential equipment off a low battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I combine both battery banks if one battery is low?\u003c\/strong\u003e Yes. The 6011 battery switch lets you combine two battery banks in the event of a low start battery, providing extra power for starting the engine or running critical equipment before returning to isolated operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this switch safe to install in a gasoline engine compartment?\u003c\/strong\u003e Yes, the Blue Sea Systems 6011 includes ignition protection, so it is suitable for installation in the engine room of gasoline-powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 6011 switch rated for water and moisture exposure?\u003c\/strong\u003e It carries an IP66 rating, meaning the housing is protected against powerful water jets, which is useful for switches mounted in open engine rooms or exposed helm areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting options are available for this switch?\u003c\/strong\u003e The 6011 Dual Circuit Plus switch can be installed three ways: surface mounted, flush mounted, or mounted at the rear of a panel, giving flexibility for different helm and engine room layouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current and voltage rating of the Blue Sea Systems 6011?\u003c\/strong\u003e The 6011 is rated for 300 Amps at 32 Volts, with a maximum wattage rating of 9600 watts, and operates in an ON-OFF, 3-position configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the terminal studs made of?\u003c\/strong\u003e The switch uses tin-plated copper terminal studs built as a single piece, with sufficient length to connect multiple cables while maintaining a secure fastening point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the switch have a contact design that avoids power interruption?\u003c\/strong\u003e Yes, the 6011 uses a make-before-break contact design, which switches between battery banks without interrupting power flow, helping protect connected electronics during switching.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the physical dimensions and weight of this battery switch?\u003c\/strong\u003e The Blue Sea Systems 6011 measures 7 x 4 x 3 inches and weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the knob be removed to prevent someone from switching the battery banks?\u003c\/strong\u003e Yes, the 6011 has a removable knob, which can be taken off to help prevent unintended power flow while servicing the electrical system, along with a tactile switch face for use in low light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this switch come in?\u003c\/strong\u003e The Blue Sea Systems 6011 m-Series Dual Circuit Plus Battery Switch is finished in red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 6011 switch part of a larger charging system?\u003c\/strong\u003e The 6011 Dual Circuit Plus switch is designed to work alongside an automatic charging relay, which automatically combines battery banks for charging and isolates them again during discharge, giving a complete two-battery-bank management setup.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989506076891,"sku":"BSS-6011","price":58.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6011.jpg?v=1784507144"},{"product_id":"blue-sea-systems-6007-m-series-mini-4-position-battery-selector-switch-300a-continuous-ignition-protected","title":"Blue Sea Systems 6007 M-Series 4-Position Mini Selector Battery Switch, 300A Continuous, 32V DC, Red","description":"\u003cp\u003eThe Blue Sea Systems 6007 is a compact 4-position mini selector battery switch built to manage a single battery bank and its connected load group on a boat. It gives the operator OFF, 1, 2, and BOTH\/COMBINE positions, letting the vessel draw power from either battery individually or combine both battery banks together for engine starting or essential radio use when one battery is running low. The switch uses a make-before-break contact design, so the circuit stays connected while switching between battery banks and power is never interrupted mid-transition.\u003c\/p\u003e\u003cp\u003eIts small footprint supports installation in tight electrical panels or engine spaces, and it offers three mounting options: on the surface, flush-mounted, or at the rear of a panel, giving installers flexibility depending on available space. The switch carries ignition protection, making it suitable for mounting in the engine room of gasoline powered boats where protected electrical components are required. The switch face has a tactile surface, and the removable knob helps prevent accidental switching during electrical system service. Terminal studs are tin plated copper, built as a single piece, and sized to accept multiple cable connections while supporting a secure fastening point. A 6-circuit label set is included with the 6007 for marking connected circuits at installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6007\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e 4-Position Selector Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCranking Rating (30 sec):\u003c\/strong\u003e 900A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Rating (5 min):\u003c\/strong\u003e 500A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 300A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Voltage:\u003c\/strong\u003e 32V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Design:\u003c\/strong\u003e Make-before-break\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface, flush, or rear-of-panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Yes, suitable for gasoline engine rooms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic housing with tin plated copper terminal studs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 7 x 4 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.77 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Label Set:\u003c\/strong\u003e 6-circuit label set included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulatory Compliance:\u003c\/strong\u003e CE marked, ISO 8846, UL Listed (UL 1107 electric power)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 6007 battery switch do?\u003c\/strong\u003e The 6007 is a 4-position mini selector battery switch that lets a boat draw power from battery 1, battery 2, both batteries combined, or shut all power off, managing a single battery bank and its connected load group.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 6007 rated for use in a gasoline engine room?\u003c\/strong\u003e Yes, the 6007 includes ignition protection, so it is suitable for installation in the engine room of gasoline powered boats where protected electrical components are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum voltage and current rating of the 6007?\u003c\/strong\u003e The 6007 has a maximum operating voltage of 32V DC, a continuous rating of 300A, a 5-minute intermittent rating of 500A, and a 30-second cranking rating of 900A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Blue Sea 6007 mounted?\u003c\/strong\u003e The 6007 supports three mounting methods: surface mount, flush mount, or rear-of-panel mount, allowing installers to fit it into different panel layouts and limited spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes switching battery banks on the 6007 interrupt power?\u003c\/strong\u003e No. The 6007 uses a make-before-break contact design, so the circuit remains connected while switching between battery banks and power is not interrupted during the transition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the 6007 battery switch?\u003c\/strong\u003e The Blue Sea Systems 6007 measures 7 x 4 x 3 inches and weighs 0.77 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the terminal stud made of on the 6007?\u003c\/strong\u003e The 6007 uses tin plated copper terminal studs, built as a single piece, sized to accept multiple cable connections with a secure fastening point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 6007 come with circuit labels?\u003c\/strong\u003e Yes, the 6007 includes a 6-circuit label set for marking connected circuits, unlike the 6004 and 6005 switches, which do not include a label set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Blue Sea 6007 switch?\u003c\/strong\u003e The 6007 M-Series selector switch is red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat certifications does the 6007 carry?\u003c\/strong\u003e The Blue Sea Systems 6007 is CE marked, meets ISO 8846, and is UL Listed under UL 1107 for electric power applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the knob be removed from the 6007 switch?\u003c\/strong\u003e Yes, the 6007 has a removable knob, which helps prevent unintended switching or power flow during electrical system service.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989506240731,"sku":"BSS-6007","price":54.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6007.jpg?v=1784507130"},{"product_id":"blue-sea-systems-6010-m-series-mini-dual-circuit-battery-switch-300a-continuous-32v-dc-red","title":"Blue Sea Systems 6010 Dual Circuit Battery Switch, 300 Amp, Red","description":"\u003cp\u003eThe Blue Sea Systems 6010 is a Dual Circuit battery switch built to control two electrically isolated battery banks from a single compact unit. Unlike standard selector switches, the Dual Circuit design (used only on the 6010 and 55102 models) does not include a combine feature, so the positive and negative conductors of each bank stay electrically isolated at all times. This isolation is what allows the 6010 to safely disconnect the positive and negative conductors of a circuit simultaneously, something standard single-circuit selector switches should not be used for.\u003c\/p\u003e\u003cp\u003eThe switch is rated for 300 amps continuous at up to 32 volts DC and uses a make-before-break contact design so power is not interrupted while switching between battery banks. Tin-plated copper terminal studs are built as a single piece with enough length to accept multiple cable connections, and the copper contacts sit inside a red plastic housing rated IP66 for protection against dust and water. The switch is ignition protected, allowing installation in the engine room of gasoline-powered boats. A tactile switch face and removable knob help the user confirm switch position by feel and support locking out the switch during service.\u003c\/p\u003e\u003cp\u003eIts compact footprint supports installation in tight spaces, and it can be mounted three ways: on the surface, flush-mounted, or from the rear of a panel, making it adaptable to a range of helm and engine compartment layouts.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Dual Circuit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombine Feature:\u003c\/strong\u003e None (electrically isolated circuits)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e ON-ON-OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Current Rating:\u003c\/strong\u003e 300 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 32 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Design:\u003c\/strong\u003e Make-before-break\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Studs:\u003c\/strong\u003e Tin-plated copper, single piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Options:\u003c\/strong\u003e Surface, flush, or rear-of-panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Yes, rated for gasoline engine rooms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure Rating:\u003c\/strong\u003e IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 7 x 4 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Removable knob\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085060107\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 6010 battery switch do?\u003c\/strong\u003e The 6010 is a Dual Circuit battery switch that controls two electrically isolated battery banks from one compact unit, allowing the positive and negative conductors of a circuit to be disconnected simultaneously.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 6010 combine two battery banks together?\u003c\/strong\u003e No. The 6010 does not include a combine feature, so its two circuits remain electrically isolated from each other at all times, unlike combine-capable switches such as the Dual Circuit Plus.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the continuous amperage rating of the 6010 switch?\u003c\/strong\u003e The Blue Sea Systems 6010 is rated for 300 amps continuous at up to 32 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 6010 battery switch?\u003c\/strong\u003e The 6010 has a red plastic housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting options does the 6010 support?\u003c\/strong\u003e Three mounting methods are supported for the 6010: surface mount, flush mount, or mounting from the rear of a panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 6010 battery switch safe to install in a gasoline engine room?\u003c\/strong\u003e Yes, the 6010 includes ignition protection, which allows it to be installed in the engine room of gasoline-powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 6010 switch housing made of?\u003c\/strong\u003e The housing is plastic with copper contacts, and the switch carries an IP66 rating for protection against dust and water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 6010 weigh?\u003c\/strong\u003e The 6010 weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the terminal studs on the 6010 made of?\u003c\/strong\u003e The 6010 uses tin-plated copper terminal studs built as a single piece, sized to accept multiple cable connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 6010 different from a Dual Circuit Plus switch?\u003c\/strong\u003e The 6010 Dual Circuit switch keeps two battery banks fully isolated with no combine option, while a Dual Circuit Plus switch such as the 11001 can also combine battery banks to all loads and should not be used to switch positive and negative conductors simultaneously.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat enclosure rating does the 6010 carry?\u003c\/strong\u003e The Blue Sea Systems 6010 carries an IP66 enclosure rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 6010 battery switch?\u003c\/strong\u003e The 6010 measures 7 x 4 x 4 inches.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989506339035,"sku":"BSS-6010","price":71.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6010.jpg?v=1784507139"},{"product_id":"blue-sea-systems-7601-m-acr-automatic-charging-relay-12-24v-dc-65a-combines-battery-banks-for-outboard-inboard-alternators","title":"Blue Sea Systems 7601 m-ACR Automatic Charging Relay, 65 Amp 12\/24V DC","description":"\u003cp\u003eThe Blue Sea Systems 7601 m-ACR Automatic Charging Relay automatically combines battery banks when charging and isolates them when discharging, keeping house and engine circuits properly separated until an alternator is running. It is designed to manage charging current from alternators up to 65 Amps, the range found on most outboards and many inboard engines, making it a compact solution for dual-battery bank management. A Start Isolation (SI) function temporarily isolates house loads from the engine circuit during engine cranking, protecting sensitive house electronics from the voltage sags and spikes that occur when the starter draws current. The m-ACR operates automatically at 12V DC or 24V DC and switches up to 65 Amps of contact current through Normally Open, Quick Connect terminals with tinned brass contacts for corrosion resistance in a marine environment. Its compact housing supports three mounting styles: surface mount, rear mount, or panel mount, giving installers flexibility in tight helm or engine bay spaces. The m-ACR is also offered as a module within a Custom 360 Panel for builders who want it integrated into a larger electrical panel layout. With a 10 second operating time and a 9.5V under-voltage lockout threshold, the relay is built to respond predictably to real charging conditions rather than momentary voltage fluctuations, helping protect both battery banks from unwanted cross-connection or premature isolation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7601\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Automatic Charging Relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 65 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Current Rating:\u003c\/strong\u003e 65 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Switching Current:\u003c\/strong\u003e 65 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Switching Voltage:\u003c\/strong\u003e 24 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Switching Voltage:\u003c\/strong\u003e 10.8 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Voltage:\u003c\/strong\u003e 24 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification Met:\u003c\/strong\u003e 12V DC, 24V DC, 9.5V Under Voltage Lockout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1560 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Time:\u003c\/strong\u003e 10 Seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Quick Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Tinned Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Terminals:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount, Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085076016\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 7601 m-ACR do?\u003c\/strong\u003e It automatically combines two battery banks when the alternator is charging and isolates them again when charging stops, so the house bank cannot drain the starting bank between charges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum alternator output the m-ACR 7601 can handle?\u003c\/strong\u003e It is designed to manage charging current from alternators up to 65 Amps, the output range found on most outboards and many inboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 7601 work on both 12V and 24V systems?\u003c\/strong\u003e Yes, the m-ACR 7601 operates automatically on 12V DC or 24V DC systems and is rated for up to 24 Volts maximum switching voltage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is Start Isolation (SI) on the m-ACR?\u003c\/strong\u003e Start Isolation temporarily isolates house loads from the engine circuit during engine cranking, which protects sensitive house electronics from the voltage sags and spikes a starter motor can cause.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Blue Sea Systems 7601 mounted?\u003c\/strong\u003e The compact m-ACR design supports three mounting styles: surface mount, rear mount, or panel mount, allowing it to fit a range of helm or engine bay layouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much current can the 7601 relay switch?\u003c\/strong\u003e The m-ACR 7601 has a maximum switching current of 65 Amps and a contact current rating of 65 Amps, using Normally Open, Quick Connect terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the relay contacts made of on the 7601?\u003c\/strong\u003e The m-ACR uses tinned brass contacts, chosen for corrosion resistance in a marine electrical environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAt what voltage does the m-ACR isolate the battery banks?\u003c\/strong\u003e The 7601 has a minimum switching voltage of 10.8 Volts and includes a 9.5V under-voltage lockout as part of its specification, so it isolates the banks once voltage drops rather than staying combined indefinitely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does the Blue Sea Systems 7601 respond to a change in charging state?\u003c\/strong\u003e The m-ACR has a 10 second operating time, allowing it to respond to real charging conditions rather than momentary voltage fluctuations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 7601 weigh?\u003c\/strong\u003e The m-ACR 7601 weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the m-ACR 7601 be integrated into a larger electrical panel?\u003c\/strong\u003e Yes, in addition to standalone surface, rear, or panel mounting, the m-ACR is also available as a module within a Custom 360 Panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Blue Sea Systems 7601 manufactured?\u003c\/strong\u003e The m-ACR 7601 has a stated country of origin of United States.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989511778523,"sku":"BSS-7601","price":108.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7601.jpg?v=1784507227"},{"product_id":"blue-sea-systems-7608-batterylink-20a-battery-charger-170a-acr-12v-dc-2-bank","title":"Blue Sea Systems 7608 BatteryLink 20A Battery Charger + 170A ACR, 12V DC 2-Bank","description":"\u003cp\u003eThe Blue Sea Systems 7608 BatteryLink combines a 20A multistage battery charger with an integrated 170A Automatic Charging Relay (ACR) so you can keep two isolated 12V battery banks charged both at the dock and underway. Plug into 100-240V AC shore power for 3-stage charging, then rely on the built-in ACR to share alternator output between the start and auxiliary banks once you leave the dock. Battery temperature compensation, start isolation, and emergency parallel combine to protect your electronics and your batteries.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7608\u003c\/li\u003e\n\u003cli\u003eDC output current: 20A\u003c\/li\u003e\n\u003cli\u003eNominal output voltage: 12V DC\u003c\/li\u003e\n\u003cli\u003eIntegrated ACR continuous rating: 170A\u003c\/li\u003e\n\u003cli\u003eOutput connections: 2 positive, 1 negative\u003c\/li\u003e\n\u003cli\u003eAC input: 100-240V AC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eCharge stages: 3-stage (multistage)\u003c\/li\u003e\n\u003cli\u003eTypical float voltage: 13.5V DC\u003c\/li\u003e\n\u003cli\u003eTypical absorption voltage: 14.4V DC\u003c\/li\u003e\n\u003cli\u003eOperating current (no AC power): 10 mA\u003c\/li\u003e\n\u003cli\u003eACR combine voltage: 13.0V (2 min) and 13.5V (30 sec)\u003c\/li\u003e\n\u003cli\u003eACR open voltage: 12.75V (30 sec) and 12.35V if voltage is rising\u003c\/li\u003e\n\u003cli\u003ePlug style: NEMA 5-15P\u003c\/li\u003e\n\u003cli\u003eCompatible battery types: AGM, Flooded, TPPL\u003c\/li\u003e\n\u003cli\u003eRecommended minimum battery capacity: 100Ah (20h rate) per bank\u003c\/li\u003e\n\u003cli\u003eRecommended maximum battery capacity: 400Ah (20h rate) total of both banks\u003c\/li\u003e\n\u003cli\u003eTemperature sensor 1820 included\u003c\/li\u003e\n\u003cli\u003eLED remote indicator included\u003c\/li\u003e\n\u003cli\u003eWeight: 6.75 lb\u003c\/li\u003e\n\u003cli\u003eWarranty: 5 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal 12V DC dual-bank marine system. Suited to boats running two isolated banks (start and auxiliary) with a combined capacity of 100Ah to 400Ah at the 20-hour rate.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Blue Sea Systems 7608 BatteryLink?\u003c\/strong\u003e The Blue Sea Systems 7608 BatteryLink is a marine battery management unit that pairs a 20A multistage 12V DC battery charger with an integrated 170A Automatic Charging Relay (ACR) to charge and manage two isolated battery banks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many battery banks can the 7608 charge?\u003c\/strong\u003e The 7608 charges two isolated 12V DC battery banks, with two positive output connections and one negative connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the charging output of the 7608?\u003c\/strong\u003e It delivers 20A of DC charging output at a nominal 12V DC using a 3-stage charging profile.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the integrated 170A ACR do?\u003c\/strong\u003e The integrated 170A Automatic Charging Relay shares DC power from the alternator between the start and auxiliary batteries when you are away from the dock, combining the banks to charge both while protecting the start battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat AC input does the 7608 accept?\u003c\/strong\u003e The 7608 accepts 100-240V AC at 50\/60 Hz and uses a NEMA 5-15P plug, so it works with standard shore power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich battery types are compatible with the 7608?\u003c\/strong\u003e The 7608 is compatible with AGM, Flooded, and TPPL battery types.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat battery capacity does the 7608 support?\u003c\/strong\u003e Blue Sea Systems recommends a minimum of 100Ah (20h rate) per bank and a maximum of 400Ah (20h rate) total across both banks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the typical charging voltages?\u003c\/strong\u003e Typical float voltage is 13.5V DC and typical absorption voltage is 14.4V DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 7608 protect sensitive electronics?\u003c\/strong\u003e Yes. Start isolation protects sensitive electronics from voltage sags and spikes during engine starting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 7608 include battery temperature compensation?\u003c\/strong\u003e Yes. Battery temperature compensation prolongs battery life and is enabled by the included temperature sensor 1820.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 7608 jump start a low battery?\u003c\/strong\u003e Yes. The emergency parallel feature allows remote combining of both batteries to jump start the engine if the start battery is low.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the warranty on the 7608?\u003c\/strong\u003e The Blue Sea Systems 7608 carries a 5 year warranty.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989511811291,"sku":"BSS-7608","price":334.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7608.jpg?v=1784507646"},{"product_id":"blue-sea-systems-7610-si-acr-automatic-charging-relay-12-24v-dc-120a-dual-battery-bank-combiner","title":"Blue Sea Systems SI-ACR Automatic Charging Relay 7610, 12\/24V DC, 120 Amp","description":"\u003cp\u003eThe Blue Sea Systems SI-ACR (7610) is an Automatic Charging Relay that combines battery banks automatically while charging and isolates them automatically when discharging, so house loads never draw down the engine start battery. It operates on a 12\/24 volt auto-ranging voltage input, making it suitable for both 12V and 24V DC electrical systems, and supports high-output alternators up to 120 amperes.\u003c\/p\u003e\u003cp\u003eSensitive electronics are protected because the SI-ACR provides temporary isolation of house loads from the engine circuit during engine cranking, preventing voltage drop from affecting connected equipment. The relay uses hermetically sealed, vaporproof electrical contacts rated for 120 amps, with contacts made of stainless steel or tinned material for corrosion resistance in a marine environment. It is ignition protected, meaning it is safe for installation aboard gasoline powered boats. The unit switches automatically with a minimum switching voltage of 13 volts DC and an operating time of 10 seconds, connects via quick connect terminals (2 terminals total), and can be floor mounted or mounted without a bracket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7610\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Automatic Charging Relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12\/24 Volt DC, auto-ranging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 120 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Voltage:\u003c\/strong\u003e 24 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Switching Voltage:\u003c\/strong\u003e 13 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Time:\u003c\/strong\u003e 10 Seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Terminals:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 2880 Watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Quick Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Stainless Steel or Tinned Material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Hermetically Sealed, Vaporproof Electrical Contacts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Floor Mount or None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Ignition Protected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085076108\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems SI-ACR 7610 do?\u003c\/strong\u003e The SI-ACR (7610) automatically combines battery banks when charging and isolates them when discharging, so house loads cannot draw down the starting battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum alternator output the 7610 supports?\u003c\/strong\u003e The Blue Sea Systems SI-ACR 7610 supports high-output alternators up to 120 amperes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage systems is the 7610 compatible with?\u003c\/strong\u003e It has a 12\/24 volt auto-ranging voltage input, so the same SI-ACR 7610 works on both 12V and 24V DC marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SI-ACR safe to install on a gasoline powered boat?\u003c\/strong\u003e Yes, the 7610 is ignition protected, which means it is safe for installation aboard gasoline powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of the 7610 relay?\u003c\/strong\u003e 120 amps is the current rating of the Blue Sea Systems 7610, matching its hermetically sealed, vaporproof contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the SI-ACR protect electronics during engine cranking?\u003c\/strong\u003e During engine cranking, the 7610 temporarily isolates house loads from the engine circuit, protecting sensitive electronics from voltage drop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does it take the 7610 to switch battery banks?\u003c\/strong\u003e The operating time of the SI-ACR 7610 is 10 seconds, with a minimum switching voltage of 13 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of contacts does the 7610 use?\u003c\/strong\u003e Hermetically sealed, vaporproof electrical contacts made of stainless steel or tinned material are used in the Blue Sea Systems 7610.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the SI-ACR 7610 mounted?\u003c\/strong\u003e The 7610 can be floor mounted or installed without a mounting bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does the 7610 have?\u003c\/strong\u003e The Blue Sea Systems SI-ACR 7610 has 2 terminals using a quick connect connector type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 7610 weigh?\u003c\/strong\u003e The Blue Sea Systems SI-ACR 7610 weighs 1.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat operation mode does the SI-ACR use?\u003c\/strong\u003e The 7610 operates in automatic mode, combining and isolating battery banks without manual switching.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989512270043,"sku":"BSS-7610","price":156.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7610.jpg?v=1784507231"},{"product_id":"blue-sea-systems-7622-ml-acr-12v-dc-500a-automatic-charging-relay-with-manual-control","title":"Blue Sea Systems 7622 ML-ACR 12V DC 500A Automatic Charging Relay with Manual Control, Gray","description":"\u003cp\u003eThe Blue Sea Systems 7622 is a 12V DC, 500 Amp ML-ACR (Automatic Charging Relay) designed to automatically combine two large battery banks for charging and separate them once the engine is shut off, protecting house loads from being drawn down by the starting battery. Unlike a standard automatic-only ACR, the 7622 adds a manual control switch that lets the operator combine or isolate the battery banks with or without power present, including a LOCK OFF position for safe servicing of the electrical system.\u003c\/p\u003e\u003cp\u003eThe relay uses a Deutsch DTM connector and normally-closed, silver-alloy contacts rated for 500 amps of continuous current, with a 12 volt coil and a 12 volt minimum switching voltage. It is built to marine-grade electrical equipment and battery isolator standards and is intended for surface mounting near the battery banks it manages. The 7622 includes the ML-Series Remote Control Contura Switch (PN 2146), which provides the manual override function from a remote helm or panel location.\u003c\/p\u003e\u003cp\u003eThis ACR is suited for boats and other 12 volt DC systems running dual large battery banks where automatic charge combining plus a manual override for servicing or emergency use is required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7622\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e ML-ACR Automatic Charging Relay with Manual Control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Voltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Switching Voltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 500 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Silver Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Deutsch DTM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Automatic, Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Terminals:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Component:\u003c\/strong\u003e ML-Series Remote Control Contura Switch, PN 2146\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification Met:\u003c\/strong\u003e Marine-grade Electrical Equipment and Battery Isolator Standards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 7622 ML-ACR do?\u003c\/strong\u003e The 7622 is a 12 volt DC, 500 amp Automatic Charging Relay that automatically combines two large battery banks while charging and separates them once the engine stops, so house loads cannot draw down the starting battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes this different from a standard automatic-only ACR?\u003c\/strong\u003e The 7622 adds a manual control switch on top of the automatic function, letting you combine or isolate the battery banks with or without power present, plus a LOCK OFF position for safely servicing the electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat current rating does the 7622 support?\u003c\/strong\u003e The Blue Sea Systems 7622 is rated for 500 amps of continuous current through normally-closed, silver-alloy contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage system is the 7622 built for?\u003c\/strong\u003e This ACR is a 12 volt DC unit, with a 12 volt coil and a 12 volt minimum switching voltage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 7622 come with a control switch?\u003c\/strong\u003e Yes, the Blue Sea Systems 7622 includes the ML-Series Remote Control Contura Switch, part number 2146, which provides the manual override function.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 7622 mounted?\u003c\/strong\u003e The 7622 is a surface-mount relay intended to be installed near the battery banks it manages.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of electrical connector does the 7622 use?\u003c\/strong\u003e It uses a Deutsch DTM connector for its control wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 7622 weigh?\u003c\/strong\u003e The Blue Sea Systems 7622 weighs 2.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 7622 housing?\u003c\/strong\u003e The 7622 has a gray housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat standards is the 7622 built to?\u003c\/strong\u003e The 7622 meets marine-grade electrical equipment and battery isolator standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 7622 isolate the battery banks for servicing?\u003c\/strong\u003e Yes, the manual control switch on the 7622 has a LOCK OFF position that isolates the battery banks so the electrical system can be serviced safely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does the 7622 have?\u003c\/strong\u003e The Blue Sea Systems 7622 has 2 terminals.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989512335579,"sku":"BSS-7622","price":357.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7622.jpg?v=1784507654"},{"product_id":"blue-sea-systems-7635-m-lvd-low-voltage-disconnect-65a-12v-dc-battery-protection-with-status-light","title":"Blue Sea Systems 7635 m-LVD Low Voltage Disconnect, 65 Amp 12V DC","description":"\u003cp\u003eThe Blue Sea Systems 7635 m-LVD Low Voltage Disconnect is a 65 Amp continuous rated device built for 12V DC marine electrical systems. It automatically disconnects a load bank from the battery bank when voltage drops to a low state, protecting the battery from over-discharge, and can also be operated manually via its off setting. A status light built into both the m-LVD unit and its companion Remote Control Switch gives a clear visual warning of the low voltage state before the disconnect occurs, so the operator has advance notice before power is cut.\u003c\/p\u003e\u003cp\u003eThe housing is constructed of plastic with metal contacts and carries an IP65 rating for protection against dust and water spray, making it suitable for the harsh, damp environments typical of a boat's electrical compartment. It is a panel mount device with a 1-way circuit configuration and connects via clamp or plug-in terminals. The unit is designed for 12V DC systems commonly found on marine vessels, RVs, and off-grid solar installations, and is intended for automatic or off operation modes controlled remotely.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7635\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e m-LVD Low Voltage Disconnect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 65 Amps continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Automatically, Off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 780 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Remote Control Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Method:\u003c\/strong\u003e Remote\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 1-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Clamp or plug in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7.05 x 6.78 x 2.7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.77 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Protection Rating:\u003c\/strong\u003e IP65\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Temperature Rating:\u003c\/strong\u003e 20 degrees Celsius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper Temperature Rating:\u003c\/strong\u003e 60 degrees Celsius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Vehicle Type:\u003c\/strong\u003e Marine vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 7635 m-LVD do?\u003c\/strong\u003e It automatically disconnects a load bank from the battery bank when voltage drops to a low state, protecting the battery from over-discharge, and can also be switched off manually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of the 7635 m-LVD?\u003c\/strong\u003e The unit is rated for 65 Amps continuous at 780 watts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage system is the Blue Sea 7635 designed for?\u003c\/strong\u003e It is built for 12 Volt DC systems, the type found on most marine vessels, RVs, and off-grid solar setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 7635 give any warning before it disconnects power?\u003c\/strong\u003e Yes, a status light built into both the m-LVD unit and its Remote Control Switch visually warns of the low voltage state before the disconnect actually happens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the m-LVD Low Voltage Disconnect?\u003c\/strong\u003e The Blue Sea Systems 7635 measures 7.05 x 6.78 x 2.7 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 7635 weigh?\u003c\/strong\u003e It weighs 0.77 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 7635 housing made of?\u003c\/strong\u003e The housing is plastic with metal contacts, rated IP65 for protection against dust and water spray in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 7635 mounted?\u003c\/strong\u003e It is a panel mount device with a 1-way circuit and a single position, connecting via clamp or plug-in terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the low voltage disconnect be operated manually?\u003c\/strong\u003e Yes, the 7635 supports both automatic operation and a manual off setting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range is the 7635 rated for?\u003c\/strong\u003e Blue Sea Systems rates the unit from 20 degrees Celsius to 60 degrees Celsius.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Blue Sea 7635 m-LVD?\u003c\/strong\u003e The unit is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 7635 compatible with RV and solar systems in addition to boats?\u003c\/strong\u003e Yes, the m-LVD 7635 is designed for 12V DC systems used in marine, RV, and off-grid solar applications.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989515284699,"sku":"BSS-7635","price":124.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7635.jpg?v=1784507658"},{"product_id":"blue-sea-systems-7650-add-a-battery-kit-120a-dual-circuit-battery-management-system-with-automatic-charging-relay-for-inboards-and-larger-outboards","title":"Blue Sea Systems 7650 Add-A-Battery Kit, 120 Amp Dual Circuit System with Automatic Charging Relay","description":"\u003cp\u003eThe Blue Sea Systems 7650 Add-A-Battery Kit is a complete battery management system for boats running two battery banks. Rated for a continuous 120 Amps, it is built for inboards and larger outboards and simplifies switching and charging without requiring external regulators or isolators. At the core of the kit is a Dual Circuit Plus battery switch that manages the starter and house banks independently while still allowing simple single ON and OFF operation for everyday use. An integrated Automatic Charging Relay senses charging voltage and automatically combines both batteries during engine operation so each bank receives a charge, then isolates the batteries again once charging stops and voltage drops, helping protect sensitive electronics and preserve starting power. For situations where one battery bank is discharged, the kit includes an emergency parallel combine function that links both banks together to support engine starting. Electrical connections use stud-type terminals with copper contacts, and the current-carrying studs are tin plated to resist corrosion in harsh marine environments, supporting long-term reliable conductivity. The 7650 is designed to reduce wiring complexity and switching errors compared to running two separate battery banks with manual switches.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7650\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Marine Battery Charger Accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 120 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1440 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Stud\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Temperature Rating:\u003c\/strong\u003e 55 Degrees Celsius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper Temperature Rating:\u003c\/strong\u003e 85 Degrees Celsius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification Met:\u003c\/strong\u003e ETL, IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085076504\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.36 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 7650 Add-A-Battery Kit do?\u003c\/strong\u003e The Blue Sea Systems 7650 is a 120 Amp dual circuit battery management system that lets a boat charge and manage two battery banks with a single Dual Circuit Plus switch and an integrated Automatic Charging Relay.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 7650 kit include a battery isolator or external regulator?\u003c\/strong\u003e No separate external regulator or isolator is needed. The 7650 kit's built-in Automatic Charging Relay combines the batteries during charging and isolates them at rest, handling that function internally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of the Blue Sea Systems 7650?\u003c\/strong\u003e The 7650 Add-A-Battery Kit carries a continuous current rating of 120 Amps (1440 watts), suitable for inboards and larger outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the switch in the 7650 kit work day to day?\u003c\/strong\u003e The kit's Dual Circuit Plus battery switch manages the starter and house banks independently but is operated with a single ON and OFF control, reducing the switching errors that come with running two separate manual switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens if one battery bank is dead and I need to start the engine?\u003c\/strong\u003e The 7650 includes an emergency parallel combine function that links both battery banks together, allowing the healthy bank to help start the engine if the other bank is discharged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the terminals made of on the 7650 kit?\u003c\/strong\u003e The 7650 Add-A-Battery Kit uses stud-type terminals with copper contacts, and the current-carrying studs are tin plated to resist corrosion in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 7650 weigh?\u003c\/strong\u003e The Blue Sea Systems 7650 Add-A-Battery Kit weighs 2.36 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range is the 7650 rated for?\u003c\/strong\u003e The 7650 is rated from 55 degrees Celsius on the low end to 85 degrees Celsius on the high end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 7650 kit certified to any standards?\u003c\/strong\u003e Yes, the Blue Sea Systems 7650 meets ETL and IP54 specifications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 7650 kit automatic or does it require manual battery combining?\u003c\/strong\u003e Operation is automatic: the Automatic Charging Relay in the 7650 senses charging voltage and combines or isolates the two battery banks on its own, with manual combine only needed for the emergency parallel function.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Blue Sea Systems 7650?\u003c\/strong\u003e The UPC for the Blue Sea Systems 7650 Add-A-Battery Kit is 632085076504.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 7650 mounted?\u003c\/strong\u003e The Blue Sea Systems 7650 uses a panel mount configuration.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989517480155,"sku":"BSS-7650","price":242.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7650.jpg?v=1784507243"},{"product_id":"blue-sea-systems-9003e-e-series-battery-switch-single-circuit-on-off-350a-48v-dc","title":"Blue Sea Systems 9003E e-Series Battery Switch, Single Circuit On-Off, 350A, 48V DC, Red","description":"\u003cp\u003eThe Blue Sea Systems 9003E e-Series Battery Switch is a single circuit ON-OFF rotary switch built to control power from one battery bank on a boat's electrical system. Turning the red textured knob connects or disconnects the circuit, letting you isolate the battery bank for maintenance, winter storage, or general safety when the boat is not in use. The textured knob and face are designed so the switch can be operated by feel in low light conditions.\u003c\/p\u003e\u003cp\u003eConstruction is a durable plastic housing rated IP66 for protection against dust and heavy seas or wash-down water, and the switch carries a 350 amp continuous current rating at 48 volts DC. Terminal studs are tinned copper to resist corrosion in a marine environment and are designed to accept multiple cable connections for secure, low resistance contact. The switch supports both surface mounting and rear panel mounting, giving installers flexibility in tight helm or engine room spaces.\u003c\/p\u003e\u003cp\u003eThis is a single circuit switch only, controlling one isolated battery bank; it does not combine circuits and does not include an alternator field disconnect. Overall dimensions are 2.9 x 6.38 x 8.63 inches and the switch weighs 1.3 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9003E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Battery Switch 'E' On-Off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rotary, Single Circuit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e ON-OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 350 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 48 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Tinned Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount or Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.9 x 6.38 x 8.63 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 9003E battery switch do?\u003c\/strong\u003e The 9003E is a single circuit ON-OFF rotary switch that turns one battery bank on or off, letting you isolate that circuit for maintenance or storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current and voltage rating of the 9003E?\u003c\/strong\u003e The 9003E is rated for 350 amps at 48 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 9003E control two separate battery banks?\u003c\/strong\u003e No. The 9003E is a single circuit switch that controls only one isolated battery bank; it does not combine circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 9003E include an alternator field disconnect?\u003c\/strong\u003e No, this model of the Blue Sea Systems 9003E switch does not include an alternator field disconnect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 9003E battery switch mounted?\u003c\/strong\u003e The 9003E supports both surface mounting and rear panel mounting, allowing flexible placement in tight installation spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 9003E switch made of?\u003c\/strong\u003e The housing is plastic, and the terminal studs are tinned copper for corrosion resistance and secure cable connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the 9003E?\u003c\/strong\u003e The 9003E measures 2.9 x 6.38 x 8.63 inches and weighs 1.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 9003E rated for water or dust exposure?\u003c\/strong\u003e Yes, the 9003E carries an IP66 ingress protection rating, suitable for wet marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 9003E battery switch?\u003c\/strong\u003e The 9003E is red with a textured knob and face designed to be operated by feel in low light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the 9003E?\u003c\/strong\u003e Blue Sea Systems backs the 9003E with a limited lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminal connections does the 9003E support?\u003c\/strong\u003e The tinned copper terminal studs on the 9003E are designed to accept multiple cable connections for secure, low resistance contact.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989523083483,"sku":"BSS-9003E","price":52.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/bss-9003e_lg__92604.1558139646.500.750.jpg?v=1785329072"},{"product_id":"blue-sea-systems-9001e-e-series-battery-switch-4-position-selector-325a-32v-dc-red","title":"Blue Sea Systems 9001E e-Series Battery Switch, 4 Position Selector, 32V DC 325A, Red","description":"\u003cp\u003eThe Blue Sea Systems 9001E is a 4 position selector battery switch built for boats that need flexible control over multiple battery banks. It lets you select between battery banks individually or combine them to supply power to onboard systems, making it a common choice for dual battery bank setups where switching between house and start batteries (or combining them) is required. The compact design fits tight installation spaces, and the switch supports multiple mounting options, including surface mounting or rear panel mounting, so it can be installed to suit the available space around the helm or engine compartment.\u003c\/p\u003e\u003cp\u003eThe 9001E is ignition protected, meaning it is rated for mounting in the engine room of gasoline powered boats. It uses one piece copper studs measuring 7\/8 inch long that accept multiple cables, helping maintain secure, low resistance electrical connections at the switch. The switch face has tactile textures so the operator can identify and operate the correct position by feel in low light or no light conditions, an important detail for a component often mounted out of direct sightline. The housing is red plastic, and the unit is rated for 32 volts DC at up to 325 amps. This model does not include an alternator field disconnect (AFD) feature.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9001E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Selector 4 Position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 325 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 32 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e One piece copper studs, 7\/8 inch long, accept multiple cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount, Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.85 x 3.85 x 3.1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Ignition Protected (suitable for gasoline powered boat engine rooms)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator Field Disconnect:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Protection Rating:\u003c\/strong\u003e IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eIgnition protected for installation in the engine room of gasoline powered boats. Suited to boats with two battery banks that need selector or combine control.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 4 position selector on the Blue Sea Systems 9001E do?\u003c\/strong\u003e The 9001E is a 4 position selector switch that lets you choose between two battery banks individually, combine them, or turn the circuit off, giving flexible control over which battery bank supplies power to onboard systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 9001E safe to mount in a gasoline engine room?\u003c\/strong\u003e Yes, the 9001E is ignition protected, which means it is rated for mounting in the engine room of gasoline powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 9001E include an alternator field disconnect (AFD)?\u003c\/strong\u003e No, the Blue Sea Systems 9001E does not include an alternator field disconnect feature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and current is the 9001E rated for?\u003c\/strong\u003e The 9001E is rated for 32 volts DC and up to 325 amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the terminal studs on the 9001E made of, and what size are they?\u003c\/strong\u003e The 9001E uses one piece copper studs that are 7\/8 inch long and accept multiple cables for secure, low resistance connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the Blue Sea Systems 9001E?\u003c\/strong\u003e The 9001E measures 3.85 x 3.85 x 3.1 inches and weighs 1.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 9001E be mounted on the surface of a panel or from behind it?\u003c\/strong\u003e Yes, the 9001E supports multiple mounting options and can be installed on the surface or on the rear of a panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the correct switch position identified in low light?\u003c\/strong\u003e The 9001E has tactile textures on its face that let the operator identify and operate the correct switch position by feel in low or no light conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and material is the 9001E housing?\u003c\/strong\u003e The Blue Sea Systems 9001E has a red plastic housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Blue Sea Systems 9001E and the 9002E?\u003c\/strong\u003e Both are 4 position selector switches, but the 9002E includes AFD (alternator field disconnect) terminals while the 9001E does not.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Blue Sea Systems 9001E battery switch?\u003c\/strong\u003e The 9001E is backed by a limited lifetime warranty from Blue Sea Systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat environmental protection rating does the 9001E carry?\u003c\/strong\u003e The Blue Sea Systems 9001E carries an IP66 protection rating.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989523149019,"sku":"BSS-9001E","price":56.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/9001e__31052.1558139473.500.750.jpg?v=1785329072"},{"product_id":"blue-sea-systems-9002e-e-series-4-position-battery-switch-selector-with-afd-325a-32v-dc-red","title":"Blue Sea Systems 9002E 4-Position Battery Switch with Alternator Field Disconnect (AFD), 32V DC, 325A","description":"\u003cp\u003eThe Blue Sea Systems 9002E is a 4-position battery selector switch built to manage two isolated battery banks aboard a boat, with a built-in Alternator Field Disconnect (AFD) to protect the alternator if the switch is turned to OFF while the engine is running. The 4-position rotary dial lets the operator select Battery 1, Battery 2, Both, or OFF, so isolated banks can be run independently or combined to power all loads as needed. The switch is ignition protected, so it can be mounted in the engine room of gasoline powered boats as well as in dry electrical panel spaces.\u003c\/p\u003e\u003cp\u003eConstruction uses a durable plastic housing with a rotary knob that has a tactile texture, allowing the operator to confirm switch position by feel in low light or no-light conditions. The terminal studs are one-piece tin-plated copper, long enough to accept multiple cables while providing the torque needed for a secure, low-resistance connection. The switch offers multiple mounting options and can be installed on the surface of a panel or from the rear of a panel, with a 32 mm mounting hole. The housing carries an IP66 ingress protection rating for resistance to dust and heavy water spray, making it suitable for engine room and helm installations where moisture exposure is a concern.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9002E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Configuration:\u003c\/strong\u003e 4-Position Selector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator Field Disconnect (AFD):\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 32 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 325 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rotary\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount (Surface or Rear of Panel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 32 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3.85 x 3.85 x 3.1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Studs:\u003c\/strong\u003e One-piece tin-plated copper, 7\/8 inch long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protected:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085900250\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the AFD on the Blue Sea Systems 9002E do?\u003c\/strong\u003e The Alternator Field Disconnect (AFD) on the 9002E protects the alternator if the switch is turned to the OFF position while the engine is running, preventing damage that can occur when an alternator loses its battery connection under load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many battery banks can the 9002E manage?\u003c\/strong\u003e Two isolated battery banks can be managed with the 9002E, a 4-position selector switch that lets the operator choose Battery 1, Battery 2, Both, or OFF.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Blue Sea Systems 9002E be mounted in a gasoline engine room?\u003c\/strong\u003e Yes, the 9002E is ignition protected, so it is rated for mounting in the engine room of gasoline powered boats as well as in a standard electrical panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the mounting options for this switch?\u003c\/strong\u003e The 9002E can be installed on the surface of a panel or mounted through the rear of a panel, using a 32 mm mounting hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size cables fit the terminal studs on the 9002E?\u003c\/strong\u003e The 9002E uses one-piece tin-plated copper terminal studs that are 7\/8 inch long, long enough to accept multiple cables while still allowing the torque needed for a secure, low-resistance connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 9002E waterproof?\u003c\/strong\u003e The 9002E carries an IP66 ingress protection rating, meaning it is protected against dust ingress and powerful water jets, which suits engine room and helm mounting locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Blue Sea Systems 9002E and the 9001E?\u003c\/strong\u003e Both the 9002E and 9001E are 4-position selector switches, but the 9002E includes the Alternator Field Disconnect (AFD) feature while the 9001E does not.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and current is the 9002E rated for?\u003c\/strong\u003e The 9002E is rated for 32 Volts DC at 325 Amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the operator know which position the 9002E switch is in without looking?\u003c\/strong\u003e The rotary knob on the 9002E has a tactile texture on its face, letting the operator confirm the selected position by feel in low light or no-light conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Blue Sea Systems 9002E made of?\u003c\/strong\u003e The housing of the 9002E is plastic, with copper contacts and one-piece tin-plated copper terminal studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 9002E battery switch weigh?\u003c\/strong\u003e The 9002E weighs 1.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the physical dimensions of the 9002E?\u003c\/strong\u003e The 9002E measures 3.85 x 3.85 x 3.1 inches.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989523214555,"sku":"BSS-9002E","price":75.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/bss-9002e_lg__45326.1558172166.500.750.jpg?v=1785329072"},{"product_id":"blue-sea-systems-9012-solenoid-switch-l-series-250a-12-24v-dc-ignition-protected-battery-solenoid-beige","title":"Blue Sea Systems 9012 L-Series Solenoid Switch, 12-24V Ignition Protected","description":"\u003cp\u003eThe Blue Sea Systems 9012 is a 12-24V L-Series solenoid switch built for marine electrical systems, providing electronic on-off switching for circuits where a manual battery disconnect is already located elsewhere in the system. Unlike a remote battery switch, the 9012 solenoid has no manual control lever of its own; it is designed to be actuated electrically as part of a larger switching setup, making it a common choice for engine start circuits, battery isolation, and other high-current applications where a compact, panel-mountable switching device is needed.\u003c\/p\u003e\u003cp\u003eThe 9012 is ignition protected, meeting the safety standards required for use in engine compartments and other areas where spark-producing devices must be certified against igniting surrounding fuel vapors. It operates as a 1-way, normally open, electromechanical on-off switch with two positions and a crimp connector type for wiring. The housing is constructed of plastic with stainless steel contact material, and the switch carries an IP54 rating for protection against dust and splashing water, suiting it to the marine environment. Its compact panel-mount design and moderate current draw make it easy to integrate into existing 12-24V DC electrical panels aboard boats and other vessels.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9012\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Solenoid Switch 250A 12-24V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Battery Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12-24 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Ignition Protected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e ON-OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 0.13 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Crimp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Electromechanical On-off Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 1-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 10800 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7 x 4 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085090128\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Blue Sea Systems 9012 solenoid switch used for?\u003c\/strong\u003e The 9012 is a 12-24V L-Series solenoid switch used to electronically switch a circuit on and off, typically as part of a battery isolation or engine start circuit where a manual disconnect already exists elsewhere in the system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 9012 solenoid switch ignition protected?\u003c\/strong\u003e Yes, the Blue Sea Systems 9012 is ignition protected, meaning it is rated for safe use in engine compartments and other areas where spark-producing electrical devices must be certified against igniting fuel vapors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 9012 solenoid switch operate at?\u003c\/strong\u003e The Blue Sea Systems 9012 operates at 12-24 Volts DC, making it compatible with both standard 12V and 24V marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between a solenoid and a remote battery switch?\u003c\/strong\u003e A solenoid, like the Blue Sea Systems 9012, is an electronic switch with no manual control, intended for circuits where a manual battery disconnect is already provided elsewhere. A remote battery switch, by contrast, is a solenoid or relay paired with a manual control switch that allows switching if the control circuit is compromised or for service lockout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 9012 solenoid switch?\u003c\/strong\u003e The Blue Sea Systems 9012 measures 7 x 4 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 9012 solenoid switch weigh?\u003c\/strong\u003e The Blue Sea Systems 9012 weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 9012 solenoid switch made of?\u003c\/strong\u003e The housing of the Blue Sea Systems 9012 is made of plastic, with stainless steel contact material for the switching contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 9012 solenoid switch water resistant?\u003c\/strong\u003e The Blue Sea Systems 9012 carries an IP54 rating, providing protection against dust ingress and splashing water, which suits it to the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 9012 solenoid switch wired?\u003c\/strong\u003e The Blue Sea Systems 9012 uses a crimp connector type for wiring and is configured as a 1-way, normally open circuit with 2 positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 9012 solenoid switch be panel mounted?\u003c\/strong\u003e Yes, the Blue Sea Systems 9012 is designed as a panel-mount switch, allowing it to be installed directly into a switch panel or electrical enclosure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat current rating does the 9012 solenoid switch have?\u003c\/strong\u003e The Blue Sea Systems 9012 has a current rating of 0.13 Amps for its switching contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 9012 solenoid switch have manual on\/off control?\u003c\/strong\u003e No, the Blue Sea Systems 9012 is a solenoid-type switch with no manual control lever; it is electronically actuated and intended for use where a manual disconnect is already present elsewhere in the circuit.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989523378395,"sku":"BSS-9012","price":272.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/9012.jpg?v=1784507721"},{"product_id":"blue-sea-systems-7649-mini-add-a-battery-kit-65a-dual-circuit-battery-management-system-for-small-boats","title":"Blue Sea Systems 7649 Mini Add-A-Battery Kit, 65A Dual Circuit Battery Management System","description":"\u003cp\u003eThe Blue Sea Systems 7649 Mini Add-A-Battery Kit is a complete small boat battery management system that lets boaters charge two batteries at or away from the dock. Built for alternators up to 65 A, the kit pairs an m-Series Dual Circuit Plus Battery Switch 6011 with a BatteryLink Charger, giving small boats and tight helm spaces a compact, space saving solution for managing starter and house battery banks. The Mini Dual Circuit Plus switch controls the starter and house banks independently while still allowing single switch control of the system, so two battery installations stay simple to wire and operate. An integrated Automatic Charging Relay senses charge voltage and automatically combines the batteries during charging so both banks receive power at the same time; when the engine shuts off and voltage drops, the relay isolates the banks again to help prevent unintended discharge of the starting battery. An emergency parallel\/combine function is built in as well, so the batteries can be linked together to assist with engine starting if one battery is discharged. The kit uses marine rated components throughout, including tin plated copper studs that resist corrosion in harsh onboard environments, for dependable performance in demanding boating conditions. Its compact footprint is designed for small boats and tight installations, simplifying wiring for two bank systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7649\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Battery Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Alternator Rating:\u003c\/strong\u003e 65 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Current Rating:\u003c\/strong\u003e 65 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e m-Series Dual Circuit Plus Battery Switch 6011 and BatteryLink Charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Material:\u003c\/strong\u003e Tin plated copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 11.75 x 7.63 x 3.2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085076498\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 7649 Mini Add-A-Battery Kit include?\u003c\/strong\u003e The kit includes an m-Series Dual Circuit Plus Battery Switch 6011 and a BatteryLink Charger, combined into a complete small boat battery management system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat alternator size does the 7649 Add-A-Battery Kit support?\u003c\/strong\u003e The 7649 is designed for alternators up to 65 A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Automatic Charging Relay in the 7649 kit work?\u003c\/strong\u003e It senses charge voltage and automatically combines both batteries during charging so they charge at the same time, then isolates the banks again when voltage drops after the engine is off, helping prevent unintended discharge of the starting battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the batteries be combined for emergency starting?\u003c\/strong\u003e Yes, the 7649 kit includes an emergency parallel\/combine function that links the batteries together to assist with engine starting if one battery is discharged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Mini Dual Circuit Plus switch let me control each battery bank separately?\u003c\/strong\u003e Yes, the switch controls the starter and house banks independently while still supporting convenient single switch control for compact two battery installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 7649 kit?\u003c\/strong\u003e The Blue Sea Systems 7649 Mini Add-A-Battery Kit measures 11.75 x 7.63 x 3.2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 7649 Add-A-Battery Kit weigh?\u003c\/strong\u003e It weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the switch studs made of?\u003c\/strong\u003e The 7649 kit uses tin plated copper studs, which resist corrosion in harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 7649 kit suited for small boats with tight helm space?\u003c\/strong\u003e Yes, its compact, space saving footprint is designed to fit small boats and tight helm spaces while simplifying wiring for two bank battery systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Blue Sea Systems 7649 kit?\u003c\/strong\u003e The UPC is 632085076498.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat continuous current rating do the kit's components carry?\u003c\/strong\u003e The 7649 kit's marine rated components carry a continuous rating of 65 A.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989574103259,"sku":"BSS-7649","price":177.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7649.jpg?v=1784507239"},{"product_id":"blue-sea-systems-7700-ml-series-remote-battery-switch-solenoid-with-manual-control-500a-continuous-12v-dc","title":"Blue Sea Systems 7700 ML-Series Remote Battery Switch, 12V, 500A Continuous","description":"\u003cp\u003eThe Blue Sea Systems 7700 is an ML-Series Remote Battery Switch with Manual Control, designed to connect and disconnect a boat's battery bank from a remote location while retaining a manual back-up override at the switch itself. It is built for 12VDC systems and is rated for 500 amps continuous and 700 amps intermittent load, making it suitable for isolating house or engine battery banks on boats that need remote on\/off control without running heavy cable to a helm-mounted switch. The unit's current-carrying components use a silver alloy contact material for reliable, long-term conductivity under repeated switching cycles.\u003c\/p\u003e\u003cp\u003eControl is provided through an integrated rocker switch with indicator lights, so the operator can see switch status at a glance, and the manual back-up allows the battery connection to be operated directly at the unit if remote control power is lost. The compact housing measures 5.5 inches high by 3.75 inches wide by 2 inches deep, allowing installation in tight battery compartments, and the complete package includes the switch unit and an instruction manual.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7700\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e ML-Series Remote Battery Switch with Manual Control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Amperage:\u003c\/strong\u003e 500 amps continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Amperage:\u003c\/strong\u003e 700 amps intermittent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e Remote with manual back-up control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Feature:\u003c\/strong\u003e Rocker switch with indicators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Silver alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5.5 inches H x 3.75 inches W x 2 inches D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Switch unit and instruction manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Blue Sea Systems 7700 used for?\u003c\/strong\u003e The 7700 is an ML-Series Remote Battery Switch that connects or disconnects a 12VDC battery bank from a remote location, with a manual back-up control at the unit itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and amperage is the 7700 rated for?\u003c\/strong\u003e It is rated for 12VDC systems at 500 amps continuous and 700 amps intermittent, part number 7700.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Blue Sea Systems 7700 be operated manually?\u003c\/strong\u003e Yes, the 7700 includes a manual back-up control at the switch body in addition to its remote control function.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 7700 battery switch?\u003c\/strong\u003e The unit measures 5.5 inches high by 3.75 inches wide by 2 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 7700 weigh?\u003c\/strong\u003e The 7700 weighs 2.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the switch contacts made of?\u003c\/strong\u003e Silver alloy contacts are used in the 7700 for durable, reliable conductivity under repeated switching.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 7700 include a status indicator?\u003c\/strong\u003e Yes, it has an integrated rocker switch with indicator lights showing the connection status of the 7700.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the 7700?\u003c\/strong\u003e The package includes the ML-Series Remote Battery Switch unit itself and an instruction manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 7700 covered by a warranty?\u003c\/strong\u003e The 7700 carries a 1 year limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 7700 suitable for isolating a house battery bank?\u003c\/strong\u003e Its 500 amp continuous, 700 amp intermittent rating at 12VDC makes the 7700 suitable for remotely isolating house or engine battery banks on a boat.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989574136027,"sku":"BSS-7700","price":277.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7700.jpg?v=1784507247"},{"product_id":"blue-sea-systems-7611-automatic-charging-relay-acr-120a-12-24v-dc-batterylink","title":"Blue Sea Systems 7611 Automatic Charging Relay, 120A Continuous, 12\/24V DC Auto-Ranging","description":"\u003cp\u003eThe Blue Sea Systems 7611 is an Automatic Charging Relay (ACR) that combines a starting battery and a house battery bank whenever a charge source is present, then automatically isolates them once charging stops or a load exceeds the charge input. This lets a single alternator, shore charger, or solar controller keep multiple battery banks topped up without manual switching, while protecting the engine-start battery from being drained by house loads. The 7611 is rated for a 12\/24V DC auto-ranging voltage input, so the same relay works correctly on either a 12 volt or a 24 volt system without configuration. It uses an electromechanical, quick-connect contact design with silver contacts for reliable, low-resistance switching, and operation is fully automatic based on sensed voltage at each battery bank. An integrated LED indicates the ACR status at a glance, and the housing includes side and bottom knockouts for cable connections, simplifying installation in tight helm, engine bay, or battery compartment spaces. Built for continuous marine duty, the relay carries a 120 amp continuous current rating with a 210 amp intermittent rating, giving it headroom for charging surges and simultaneous loads. The 7611 is finished in black and yellow for easy identification among other electrical components onboard. It is designed as a drop-in battery combiner for boats running dual-battery or house\/start battery configurations that need automatic, hands-off combining logic.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7611\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Current Rating:\u003c\/strong\u003e 120 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Current Rating:\u003c\/strong\u003e 210 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Input:\u003c\/strong\u003e 12\/24 Volt DC, auto-ranging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1440 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Quick Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Electromechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface mount or panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Voltage:\u003c\/strong\u003e 24 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Resistance:\u003c\/strong\u003e 100 Milliohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Switching Voltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Terminals:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black, Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085076115\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 7611 ACR do?\u003c\/strong\u003e It automatically combines a starting battery and a house battery bank whenever a charge source is present and connected loads do not exceed the charge input, then isolates the banks again once charging stops, so the 7611 keeps both banks charged without a manual battery switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 7611 work on a 24 volt boat as well as a 12 volt boat?\u003c\/strong\u003e Yes. The Blue Sea Systems 7611 has a 12\/24V DC auto-ranging voltage input, so it senses and operates correctly on either a 12 volt or a 24 volt system without any manual configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the continuous current rating of the 7611?\u003c\/strong\u003e 120 amps continuous, with a 210 amp intermittent rating, which is the current-handling capacity of the Blue Sea Systems 7611 Automatic Charging Relay.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 7611 weigh?\u003c\/strong\u003e The Blue Sea Systems 7611 weighs 1.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 7611 a manual switch or does it operate automatically?\u003c\/strong\u003e The 7611 operates automatically. Its operation mode senses battery voltage and charge presence and closes or opens the relay contacts without any manual input from the operator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of contacts does the 7611 use?\u003c\/strong\u003e The Blue Sea Systems 7611 uses electromechanical contacts made of silver, connected through a quick-connect terminal design with 2 terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if the 7611 is actively combining the batteries?\u003c\/strong\u003e The 7611 has an integrated LED that indicates ACR status, giving a visual signal of when the relay is combining the battery banks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are cables connected to the 7611, and where does it mount?\u003c\/strong\u003e The Blue Sea Systems 7611 has side and bottom knockouts for cable connections and can be installed as a surface mount or panel mount unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 7611 housing?\u003c\/strong\u003e The 7611 is finished in black and yellow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the wattage rating of the 7611?\u003c\/strong\u003e 1440 watts, which corresponds to the Blue Sea Systems 7611's 120 amp continuous current rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum switching voltage for the 7611?\u003c\/strong\u003e 12 Volts DC is the minimum switching voltage for the Blue Sea Systems 7611 Automatic Charging Relay.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989574201563,"sku":"BSS-7611","price":107.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7611.jpg?v=1784507650"},{"product_id":"attwood-11901-4-polarized-wing-nut-battery-terminals-lead-clamps-with-cadmium-plated-bolts-negative-and-positive-set","title":"Attwood Polarized Wing Nut Battery Terminals 11901-4, Lead Terminals with Cadmium-Plated Bolts","description":"\u003cp\u003eThe Attwood 11901-4 Polarized\/Wing Nut Battery Terminals are lead battery terminal clamps designed for marine 12-volt electrical systems. Each terminal is fitted with a wing nut and a cadmium-plated bolt, allowing the connection to be tightened and removed by hand without tools, which makes them convenient for routine battery servicing, seasonal winterizing, or swapping accessories on board. The clamps are polarized: each one is stamped with a negative (-) or positive (+) sign so the correct polarity is clear at a glance, reducing the risk of a reversed connection when wiring or reconnecting a battery.\u003c\/p\u003e\u003cp\u003eConstructed from lead for reliable electrical conductivity and corrosion resistance in a marine environment, the terminals are sold as a matched negative and positive set. The product is available in bulk packaging and in aftermarket packaging, and it carries a California Proposition 65 warning.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11901-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Battery Terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Material:\u003c\/strong\u003e Lead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Material:\u003c\/strong\u003e Cadmium-plated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Style:\u003c\/strong\u003e Polarized (wing nut)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolarity Marking:\u003c\/strong\u003e Stamped negative (-) and positive (+) signs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet Includes:\u003c\/strong\u003e Negative and positive terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Bulk packaging and aftermarket packaging available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 11901-4 battery terminal set made of?\u003c\/strong\u003e The Attwood 11901-4 terminals are made of lead, with cadmium-plated bolts securing the wing nut connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these terminals require tools to install?\u003c\/strong\u003e No tools are needed for routine connect\/disconnect: the Attwood 11901-4 terminals use wing nuts on cadmium-plated bolts so they can be tightened and loosened by hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know which terminal is positive and which is negative?\u003c\/strong\u003e Each clamp in the Attwood 11901-4 set is stamped with a negative (-) or positive (+) sign, so polarity is marked directly on the terminal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 11901-4 set include both positive and negative terminals?\u003c\/strong\u003e Yes, the Attwood 11901-4 is sold as a set with one negative and one positive terminal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'polarized' mean for this battery terminal?\u003c\/strong\u003e Polarized means each Attwood 11901-4 clamp is marked with its polarity (+ or -), which helps prevent connecting the battery cable to the wrong terminal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a Proposition 65 warning for this product?\u003c\/strong\u003e Yes, the Attwood 11901-4 battery terminals carry a California Proposition 65 warning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat packaging options are available for the 11901-4 terminals?\u003c\/strong\u003e The Attwood 11901-4 is available in bulk packaging as well as aftermarket packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of bolt is used on the wing nut terminal?\u003c\/strong\u003e A cadmium-plated bolt is used on each Attwood 11901-4 wing nut terminal to secure the cable connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these terminals suitable for marine 12-volt battery systems?\u003c\/strong\u003e Yes, the Attwood 11901-4 lead wing nut terminals are designed for marine battery connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I remove and reattach these terminals repeatedly?\u003c\/strong\u003e Yes, the wing nut design of the Attwood 11901-4 allows repeated hand-tightened removal and reattachment, useful for seasonal battery servicing.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989664837851,"sku":"ATT-11901-4","price":70.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-11901-4_large__99637.1558176545.500.750.jpg?v=1785329070"},{"product_id":"attwood-9065-1-powerguard-standard-vented-marine-battery-box-for-group-24-series-24-batteries-uscg-compliant-with-350-lb-hold-down-strap","title":"Attwood 9065-1 Vented Group 24 Marine Battery Box with 350 lb Hold-Down Strap","description":"\u003cp\u003eThe Attwood 9065-1 is a vented marine battery box built to hold and protect Group 24 (Series 24) batteries up to 10.125 inches tall, keeping the battery secured and ventilated aboard fishing boats, pontoons, and other recreational vessels. The box is molded from acid-resistant polypropylene, a material chosen to withstand corrosion and exposure to battery acid while standing up to harsh marine environments; it has been drop tested across a temperature range of -20 F to 120 F. A vented cover design allows hazardous battery gases to escape rather than build up inside the box, which is the reason this style is suitable for marine use (unlike a non-vented cover, which is not).\u003c\/p\u003e\u003cp\u003eFour cable openings, each enlarged to a 0.55 inch diameter, allow clean routing of battery cables, and larger handles with rolled edges make the box easier to carry and service. Installation instructions are molded directly into the inside of the cover for quick reference during setup. Security comes from an included 40 inch hold-down strap rated to resist 350 pounds of force, nearly four times the USCG requirement, so the battery stays locked in place while underway. Mounting hardware is included, and the complete setup meets USCG Specification 183.420 and ABYC Standard E-10 for OEM-installed battery hold-down systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9065-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Size Compatibility:\u003c\/strong\u003e Group 24 \/ Series 24 batteries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Battery Height:\u003c\/strong\u003e 10.125 inches (10-1\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterior Dimensions:\u003c\/strong\u003e 10.6 inches x 7 inches x 10.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Dimensions:\u003c\/strong\u003e 14 inches D x 9.63 inches W x 10.63 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Vented\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Openings:\u003c\/strong\u003e Four, 0.55 inch diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHold-Down Strap:\u003c\/strong\u003e 40 inch strap rated to 350 pounds of force\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range:\u003c\/strong\u003e -20 F to 120 F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e USCG 183.420, ABYC E-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Battery box, 40 inch mounting strap, mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697906519\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eGroup 24 \/ Series 24 marine and RV batteries up to 10.125 inches in height\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size battery does the Attwood 9065-1 fit?\u003c\/strong\u003e It fits Group 24 (Series 24) marine and RV batteries up to 10.125 inches tall, with an interior that measures 10.6 inches by 7 inches by 10.125 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 9065-1 vented?\u003c\/strong\u003e Yes, the 9065-1 has a vented cover design that lets hazardous battery gases escape safely, which is why it is suitable for marine use, unlike a non-vented cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the battery box include a hold-down strap?\u003c\/strong\u003e A 40 inch hold-down strap is included with the Attwood 9065-1, rated to resist 350 pounds of force, nearly four times the USCG requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 9065-1 battery box made of?\u003c\/strong\u003e The 9065-1 is molded from acid-resistant polypropylene, chosen to resist corrosion and battery acid exposure in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this battery box meet Coast Guard requirements?\u003c\/strong\u003e Yes, the Attwood 9065-1 meets USCG Specification 183.420 and ABYC Standard E-10 for OEM-installed battery hold-down systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range is the 9065-1 rated for?\u003c\/strong\u003e It has been drop tested across a temperature range of -20 F to 120 F, so it holds up in cold or hot marine and outdoor conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with the 9065-1?\u003c\/strong\u003e Yes, mounting hardware ships with the Attwood 9065-1 battery box along with the 40 inch hold-down strap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cable openings does the battery box have?\u003c\/strong\u003e The Attwood 9065-1 has four cable openings, each enlarged to a 0.55 inch diameter, for routing battery cables cleanly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 9065-1 weigh?\u003c\/strong\u003e The 9065-1 battery box weighs 2.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the exterior size of the Attwood 9065-1?\u003c\/strong\u003e The exterior measures 14 inches deep by 9.63 inches wide by 10.63 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre installation instructions provided?\u003c\/strong\u003e Installation instructions are molded directly into the inside of the cover on the Attwood 9065-1 for quick reference during setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage battery is the 9065-1 designed for?\u003c\/strong\u003e The Attwood 9065-1 is designed for 12 Volt battery systems.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989675094235,"sku":"ATT-9065-1","price":10.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71EeobfUVSL.jpg?v=1784487110"},{"product_id":"attwood-9014-1-battery-box-strap-only-40-in-acid-resistant-woven-polypropylene-hold-down-with-buckle-and-mounting-hardware","title":"Attwood 9014-1 Battery Strap, 40-Inch Polypropylene Hold-Down Strap","description":"\u003cp\u003eThe Attwood 9014-1 is a 40-inch woven polypropylene battery hold-down strap designed to secure a marine or automotive battery in place, preventing it from shifting during rough water, hard turns, or transport. The strap uses a firm-grip buckle that is completely resistant to battery acid, so it holds up in the harsh, corrosive environment around a battery box or tray without weakening or corroding over time. This is a strap-only replacement part, intended for boat owners and installers who need to replace a worn, cracked, or missing strap on an existing battery box or tray setup rather than purchase a full battery box.\u003c\/p\u003e\u003cp\u003eMounting hardware is included with the strap: four #8, 3\/4-inch screws and two footman clamps, giving you everything needed to attach the strap ends to a deck, hull, or battery tray without sourcing separate fasteners. The polypropylene construction resists rot, mildew, and UV degradation better than natural fiber straps, making it a durable choice for both fresh and saltwater use. Because it ships as a single strap (package quantity of one), it is best suited for single-battery installations or as a replacement for one strap in a multi-strap setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9014-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 40 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multicoloured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697090140\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e Buckle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuckle Feature:\u003c\/strong\u003e Firm-grip buckle, resistant to battery acid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Mounting Hardware:\u003c\/strong\u003e Four #8, 3\/4-inch screws and two footman clamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the length of the Attwood 9014-1 battery strap?\u003c\/strong\u003e The Attwood 9014-1 battery strap measures 40 inches long, made of woven polypropylene.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 9014-1 come with mounting hardware?\u003c\/strong\u003e Yes, the Attwood 9014-1 includes four #8, 3\/4-inch screws and two footman clamps for mounting the strap ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 9014-1 strap made from?\u003c\/strong\u003e It is made from woven polypropylene, a material chosen for its resistance to rot, mildew, and UV exposure in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the buckle on the 9014-1 strap resistant to battery acid?\u003c\/strong\u003e Yes, the firm-grip buckle on the Attwood 9014-1 is completely resistant to battery acid, so it will not corrode from exposure near the battery terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this listing include a battery box or tray?\u003c\/strong\u003e No, the Attwood 9014-1 is a strap-only replacement part; it does not include a battery box or tray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many straps come in a package?\u003c\/strong\u003e The Attwood 9014-1 ships with a package quantity of one strap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the Attwood 9014-1 strap?\u003c\/strong\u003e The Attwood 9014-1 battery strap weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Attwood 9014-1 be used to replace a worn or broken battery strap?\u003c\/strong\u003e Yes, the 9014-1 is designed as a direct strap-only replacement for a worn, cracked, or missing battery hold-down strap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of fastener does the 9014-1 strap use to secure the battery?\u003c\/strong\u003e The strap uses a buckle-style fastener with a firm-grip, quick design to hold the strap tight around the battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 9014-1 suitable for both boats and other applications?\u003c\/strong\u003e The polypropylene construction and acid-resistant buckle of the 9014-1 make it suitable for marine battery installations as well as other battery hold-down applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Attwood 9014-1 strap?\u003c\/strong\u003e The Attwood 9014-1 strap is listed in a multicoloured finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 9014-1 battery strap?\u003c\/strong\u003e The UPC for the Attwood 9014-1 battery strap is 022697090140.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989675258075,"sku":"ATT-9014-1","price":3.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-9014-1_large__55373.1722356881.500.750.jpg?v=1785188990"},{"product_id":"attwood-9067-1-powerguard-27-vented-marine-battery-box-fits-group-27-batteries-black-with-40-inch-hold-down-strap","title":"Attwood 9067-1 Power Guard 27 Vented Battery Box for Group 27 Batteries, Black","description":"\u003cp\u003eThe Attwood 9067-1 Power Guard 27 Battery Box is a vented, black polypropylene enclosure built to hold and protect a single Group 27 (Series 27) marine battery up to 10.5 inches in height. It is designed as a hold-down system that keeps a battery secured and ventilated while guarding against water intrusion and physical damage in an onboard battery compartment. The vented cover lets hazardous battery gases escape safely, while four cable openings, enlarged to.55 inch diameter, make routing battery cables straightforward without loosening the seal around the lid. Larger handles with rolled edges make the box easier to carry and position during installation, and reference instructions are molded directly into the inside of the cover for quick setup guidance without a separate manual. The box is constructed of acid-resistant polypropylene rated for impact performance from -20 F to +120 F, holding up to sun, cold, and the corrosive effects of battery acid in a marine environment. A 40 inch hold-down strap and mounting hardware are included, with the strap rated to resist 350 pounds of force, well above the U.S. Coast Guard minimum. The complete assembly meets ABYC Standard E-10 and USCG Specification 183.420 for battery hold-down systems. It suits fishing boats, pontoons, and other vessels running a single Group 27 battery and needing a compliant, corrosion-resistant box rather than an open tray or strap-only mount.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9067-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Compatibility:\u003c\/strong\u003e Group\/Series 27 batteries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Battery Height:\u003c\/strong\u003e 10.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Dimensions:\u003c\/strong\u003e 16.88 inches D x 9.63 inches W x 10.88 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterior Dimensions:\u003c\/strong\u003e 13.06 x 6.9 x 10.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Openings:\u003c\/strong\u003e Four,.55 inch diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHold-Down Strap:\u003c\/strong\u003e 40 inch strap, rated to 350 pounds of force\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e ABYC E-10, USCG Specification 183.420\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range:\u003c\/strong\u003e -20 F to +120 F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697906717\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Power Guard 27 vented battery box, 40 inch mounting strap and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eGroup\/Series 27 marine batteries up to 10.5 inches in height\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size battery fits the Attwood 9067-1 battery box?\u003c\/strong\u003e The 9067-1 is sized for a Group 27 (Series 27) marine battery with a maximum height of 10.5 inches; the interior measures 13.06 x 6.9 x 10.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a mounting strap included with this battery box?\u003c\/strong\u003e Yes, the 9067-1 ships with a 40 inch hold-down strap and mounting hardware, with the strap rated to resist 350 pounds of force.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 9067-1 battery box made of?\u003c\/strong\u003e It is made of acid-resistant polypropylene, impact-tested from -20 F to +120 F for durability in marine and outdoor conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this battery box meet USCG and ABYC requirements?\u003c\/strong\u003e Yes, the Attwood 9067-1 complies with ABYC Standard E-10 and USCG Specification 183.420 for battery hold-down systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 9067-1 battery box weigh?\u003c\/strong\u003e The Power Guard 27 battery box weighs 2.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the box vented or fully sealed?\u003c\/strong\u003e The 9067-1 is a vented design, allowing hazardous battery gases to escape while the cover minimizes water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cable openings does the box have and how big are they?\u003c\/strong\u003e The Attwood 9067-1 has four cable openings, enlarged to.55 inch diameter, for routing battery cables.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Power Guard 27 battery box?\u003c\/strong\u003e It is molded in black polypropylene.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre installation instructions included?\u003c\/strong\u003e Reference instructions for the 9067-1 are molded directly into the inside of the cover, so they stay with the box rather than a separate paper insert.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the exterior dimensions of the 9067-1 battery box?\u003c\/strong\u003e The exterior of the box measures 16.88 inches D x 9.63 inches W x 10.88 inches H.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this box fit a taller battery than 10.5 inches?\u003c\/strong\u003e No, the 9067-1 is rated for batteries up to 10.5 inches maximum height; a taller battery will not close under the vented cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the battery box include handles for carrying?\u003c\/strong\u003e Yes, the Attwood 9067-1 has larger handles with rolled edges to make handling and installation easier.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989675421915,"sku":"ATT-9067-1","price":14.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71CW-V8ENzL.jpg?v=1784487125"},{"product_id":"attwood-9082-1-small-battery-box-with-strap-u1-series-16-vented-marine-battery-box-uscg-183-420","title":"Attwood 9082-1 Small Battery Box with Mounting Strap, Fits U1 and Series 16 Batteries, Black Vented","description":"\u003cp\u003eThe Attwood 9082-1 is a small vented battery box built to hold and protect Series 16 and U1 batteries, the size commonly used in jet skis, power lawn equipment, and garden equipment. The box is molded from polypropylene, a material that offers total resistance to battery acid, so the housing will not degrade from exposure to electrolyte spills or splashes. It is drop tested across a temperature range of -20 degrees F to +120 degrees F, confirming it holds up structurally in both cold winter storage and hot engine-bay or dock-box conditions.\u003c\/p\u003e\u003cp\u003eBattery retention is handled by an included hold-down strap that resists 350 pounds of force, nearly four times the USCG requirement for battery hold-down systems, keeping the battery locked in place under vibration and rough handling. The box meets USCG 183.420 regulations for OEM-installed battery hold-down systems. All mounting hardware is included in the box, and the vented cover design allows hazardous battery gases to escape while helping to minimize water intrusion into the battery compartment. Interior dimensions measure 8.25 x 5.5 x 7.875 inches to accommodate Series 16 and U1 battery footprints, and the complete box measures 7.5 inches deep x 11 inches wide x 8.5 inches high. This is a universal-fit accessory suited to boats, jet skis, and power lawn and garden equipment rather than a specific engine or model application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9082-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Battery Box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Size Compatibility:\u003c\/strong\u003e Series 16 and U1 batteries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilation:\u003c\/strong\u003e Vented\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHold-Down Strap Length:\u003c\/strong\u003e 40 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHold-Down Strap Rating:\u003c\/strong\u003e 350 pounds of force\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range:\u003c\/strong\u003e -20 degrees F to 120 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterior Dimensions:\u003c\/strong\u003e 8.25 x 5.5 x 7.875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 7.5 inches D x 11 inches W x 8.5 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3546 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e USCG 183.420\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Battery box, 40 inch mounting strap, mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697908216\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for Series 16 and U1 batteries used in boats, jet skis, and power lawn and garden equipment. No specific engine, make, or model application is specified.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers apply to this battery box.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size batteries does the Attwood 9082-1 battery box fit?\u003c\/strong\u003e The Attwood 9082-1 is sized for Series 16 and U1 batteries, the common sizes used in jet skis and power lawn and garden equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 9082-1 battery box vented or sealed?\u003c\/strong\u003e It is a vented design, allowing hazardous battery gases to escape while the cover helps minimize water intrusion into the compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 9082-1 battery box made of?\u003c\/strong\u003e Polypropylene, chosen for total resistance to battery acid so the housing will not break down from electrolyte exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much force can the hold-down strap on the 9082-1 withstand?\u003c\/strong\u003e 350 pounds of force, nearly four times the USCG requirement for battery hold-down systems on the Attwood 9082-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 9082-1 come with mounting hardware?\u003c\/strong\u003e Yes, mounting hardware and a 40 inch hold-down strap are included with the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the interior dimensions of the 9082-1 battery box?\u003c\/strong\u003e 8.25 x 5.5 x 7.875 inches on the inside, sized to hold Series 16 and U1 batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall exterior dimensions of the 9082-1 battery box?\u003c\/strong\u003e 7.5 inches deep by 11 inches wide by 8.5 inches high for the complete Attwood 9082-1 unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 9082-1 compliant with Coast Guard regulations?\u003c\/strong\u003e Yes, it meets USCG 183.420 regulations for OEM-installed battery hold-down systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can the 9082-1 battery box handle?\u003c\/strong\u003e It is drop tested from -20 degrees F to +120 degrees F, so the Attwood 9082-1 holds up in both cold storage and hot operating environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Attwood 9082-1 fit a boat, a jet ski, or lawn equipment?\u003c\/strong\u003e All three: the 9082-1 is a universal-fit battery box suited to boats, jet skis, and power lawn and garden equipment using Series 16 or U1 batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 9082-1 battery box weigh?\u003c\/strong\u003e 1.3546 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 9082-1 battery box?\u003c\/strong\u003e Black, with a matching vented cover.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989675487451,"sku":"ATT-9082-1","price":10.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-9082-1_large__85638.1722497100.500.750.jpg?v=1785189059"},{"product_id":"attwood-9084-1-large-vented-marine-battery-box-with-hold-down-strap-fits-group-29-31-batteries-black","title":"Attwood 9084-1 Large Vented Battery Box with Mounting Strap, Fits Group 29 and 31 Batteries","description":"\u003cp\u003eThe Attwood 9084-1 is a large vented battery box built to hold and protect Group 29 and Group 31 series marine batteries up to 9-3\/4 inches in height. Molded from acid-resistant polypropylene, the box is impact-tested from -20 F to +120 F, so it holds up to harsh marine and RV environments year-round. The vented lid design includes cable openings and upward-facing vents that release battery gases while helping to minimize water intrusion, protecting both the battery and the surrounding equipment. A heavy-duty 40-inch hold-down strap is rated to withstand 350 pounds of force, nearly four times the U.S. Coast Guard requirement, keeping the battery securely in place even in rough conditions. The box meets ABYC Standard E-10 and USCG Specification 183.420, making it suitable for both OEM and aftermarket installations. Large rolled-edge handles make the box easy to carry, molded-in instructions provide quick reference during installation, and mounting hardware is included for a fast setup. Inside dimensions measure 15-7\/16 inches long by 6-15\/16 inches wide by 9-3\/4 inches high, with outside dimensions of 18-7\/8 inches long by 9-1\/4 inches wide by 10-1\/4 inches high. The box is finished in black.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9084-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Vented Battery Box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Battery Group:\u003c\/strong\u003e Group 29 and 31 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Battery Height:\u003c\/strong\u003e 9-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Dimensions:\u003c\/strong\u003e 15-7\/16 inches L x 6-15\/16 inches W x 9-3\/4 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Dimensions:\u003c\/strong\u003e 18-7\/8 inches L x 9-1\/4 inches W x 10-1\/4 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range:\u003c\/strong\u003e -20 F to 120 F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Length:\u003c\/strong\u003e 40 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Rated Load:\u003c\/strong\u003e 350 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 40 inch mounting strap, mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e ABYC Standard E-10, USCG Specification 183.420\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697908414\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Warranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size batteries does the Attwood 9084-1 battery box fit?\u003c\/strong\u003e The Attwood 9084-1 fits Group 29 and Group 31 series batteries up to 9-3\/4 inches in height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the inside dimensions of the 9084-1 battery box?\u003c\/strong\u003e Inside dimensions are 15-7\/16 inches long by 6-15\/16 inches wide by 9-3\/4 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the outside dimensions of the 9084-1?\u003c\/strong\u003e Outside dimensions of the Attwood 9084-1 are 18-7\/8 inches long by 9-1\/4 inches wide by 10-1\/4 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 9084-1 battery box vented?\u003c\/strong\u003e Yes, the 9084-1 has a vented lid with cable openings and upward-facing vents that release battery gases while helping minimize water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow strong is the hold-down strap on the 9084-1?\u003c\/strong\u003e The included 40-inch strap is rated to withstand 350 pounds of force, nearly four times the U.S. Coast Guard requirement for battery hold-downs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 9084-1 battery box made of?\u003c\/strong\u003e The 9084-1 is molded from acid-resistant polypropylene, impact-tested from -20 F to +120 F for durability in marine and RV environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 9084-1 meet marine safety standards?\u003c\/strong\u003e Yes, the Attwood 9084-1 meets ABYC Standard E-10 and USCG Specification 183.420 for battery hold-down systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 9084-1 battery box weigh?\u003c\/strong\u003e The 9084-1 weighs 3.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Attwood 9084-1?\u003c\/strong\u003e The 9084-1 comes with a 40-inch mounting strap and mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Attwood 9084-1 battery box?\u003c\/strong\u003e The Attwood 9084-1 battery box is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer warranty on the 9084-1?\u003c\/strong\u003e The Attwood 9084-1 carries a 90-day manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 9084-1 be used on both boats and RVs?\u003c\/strong\u003e Yes, the Attwood 9084-1 is designed for use in both marine and RV battery installations.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989675585755,"sku":"ATT-9084-1","price":120.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-9084-1_lg__26607.1558181569.500.750.jpg?v=1785189136"},{"product_id":"attwood-9090-5-adjustable-marine-battery-tray-for-group-24-24m-batteries-heavy-duty-black-plastic","title":"Attwood Adjustable Battery Tray 9090-5 for Group 24 and 24M Batteries, Black Plastic","description":"\u003cp\u003eThe Attwood 9090-5 Adjustable Battery Tray is a heavy-duty, non-corrosive plastic tray built to hold and secure a Group 24 or 24M marine battery in place aboard a boat, RV, or other recreational vehicle. It is designed to withstand harsh marine and outdoor conditions without rusting or breaking down the way a metal tray can over time. An adjustable-height crossbar with retaining bolts spans the top of the battery to hold it firmly in its base, reducing shifting and movement caused by rough water, vibration, or towing. The tray body is pre-drilled to accept #10 fasteners, so it can be mounted to a deck, bulkhead, or battery box shelf without additional drilling in most installations. The design is intended to meet ABYC E-10 and U.S. Coast Guard requirements for secure battery mounting, making it a suitable choice for anyone replacing a cracked, warped, or missing battery tray, or adding a proper hold-down where one did not exist before. Finished in black plastic, the Attwood 9090-5 fits standard Group 24 and 24M battery footprints and is sold as a single, complete tray.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9090-5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Battery Group:\u003c\/strong\u003e 24 and 24M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 10 5\/8 inches L x 7 1\/4 inches W x 8 1\/2 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Pre-drilled base with adjustable-height crossbar and retaining bolts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e Meets ABYC E-10 and U.S. Coast Guard requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697909053\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGroup 24 marine batteries\u003c\/li\u003e\n\u003cli\u003eGroup 24M marine batteries\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size batteries does the Attwood 9090-5 battery tray fit?\u003c\/strong\u003e The Attwood 9090-5 is sized for Group 24 and Group 24M marine batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 9090-5 battery tray made of?\u003c\/strong\u003e It is made of heavy-duty, non-corrosive black plastic designed to hold up in marine and outdoor environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 9090-5 battery tray include a hold-down strap or crossbar?\u003c\/strong\u003e Yes, the tray comes with an adjustable-height crossbar and retaining bolts that secure the battery and limit movement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Attwood 9090-5 battery tray?\u003c\/strong\u003e The tray measures 10 5\/8 inches long by 7 1\/4 inches wide by 8 1\/2 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 9090-5 battery tray weigh?\u003c\/strong\u003e The Attwood 9090-5 weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 9090-5 meet marine safety standards?\u003c\/strong\u003e Yes, it is designed to meet ABYC E-10 and U.S. Coast Guard requirements for battery installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Attwood 9090-5 battery tray mounted?\u003c\/strong\u003e The base is pre-drilled to accept #10 fasteners, allowing it to be screwed down to a deck, shelf, or battery box without additional drilling in most cases.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Attwood 9090-5 be used to replace a damaged or missing battery tray?\u003c\/strong\u003e Yes, it is intended as a replacement or upgrade for an existing Group 24 or 24M battery tray, or as a new installation where a secure hold-down is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Attwood 9090-5 battery tray?\u003c\/strong\u003e The 9090-5 is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 9090-5 suitable for RV use as well as boats?\u003c\/strong\u003e Yes, the tray is built for both marine and RV applications wherever a Group 24 or 24M battery needs to be secured.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Attwood 9090-5 battery tray?\u003c\/strong\u003e The 9090-5 ships as a complete tray with its adjustable-height crossbar and retaining bolts.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989675618523,"sku":"ATT-9090-5","price":9.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71_1xgcOEdL.jpg?v=1784487140"},{"product_id":"attwood-9091-5-adjustable-marine-battery-tray-for-group-27-27m-batteries-abyc-e-10-compliant-hold-down","title":"Attwood 9091-5 Adjustable Battery Tray for Group 27\/27M Marine Batteries","description":"\u003cp\u003eThe Attwood 9091-5 is an adjustable battery tray built to keep Group 27 and 27M marine batteries securely mounted through rough water, vibration, and trailering. Molded from durable, non-corrosive black plastic, the tray resists the moisture and salt exposure common in onboard electrical compartments while providing a rigid base that keeps the battery from shifting during operation. An adjustable-height crossbar combines with two retaining bolts to clamp the battery down firmly, and the tray is sized specifically to cradle Group 27 and 27M battery cases for a snug, vibration-resistant fit.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the tray mounts using number 10 screws, making it a quick swap for boats, RVs, and other 12-volt battery installations. The design meets ABYC standard E-10 and U.S. Coast Guard requirements, so it satisfies the electrical safety standards marine installers and inspectors look for. Whether replacing a cracked or corroded tray or adding secure battery mounting to a new setup, the Attwood 9091-5 delivers a dependable, code-compliant hold-down solution for Group 27\/27M batteries.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9091-5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Group Size:\u003c\/strong\u003e 27\/27M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 12-1\/8 inches x 6-3\/4 inches x 8-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9333 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Adjustable-height crossbar and two retaining bolts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Number 10 screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e Meets ABYC standard E-10 and U.S. Coast Guard requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Electrical Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGroup 27 marine batteries\u003c\/li\u003e\n\u003cli\u003eGroup 27M marine batteries\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat battery sizes does the Attwood 9091-5 fit?\u003c\/strong\u003e The Attwood 9091-5 is sized for Group 27 and Group 27M marine batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the battery held down in this tray?\u003c\/strong\u003e An adjustable-height crossbar paired with two retaining bolts clamps the battery firmly in place, keeping it from shifting in rough water or during trailering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Attwood 9091-5 battery tray?\u003c\/strong\u003e The tray measures 12-1\/8 inches by 6-3\/4 inches by 8-1\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 9091-5 battery tray weigh?\u003c\/strong\u003e It weighs 0.9333 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 9091-5 made of?\u003c\/strong\u003e It is made of durable, non-corrosive black plastic designed to withstand marine electrical compartment conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this battery tray meet marine safety standards?\u003c\/strong\u003e Yes, the 9091-5 meets ABYC standard E-10 and U.S. Coast Guard requirements for battery mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is needed to install the Attwood 9091-5?\u003c\/strong\u003e The tray installs with number 10 screws and includes its own adjustable-height crossbar and two retaining bolts for securing the battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 9091-5 suitable for boats and RVs?\u003c\/strong\u003e Yes, this battery tray is designed for 12-volt battery installations in boats, RVs, and similar applications requiring Group 27\/27M battery mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Attwood 9091-5 battery tray?\u003c\/strong\u003e The tray is black plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included with the Attwood 9091-5?\u003c\/strong\u003e The tray ships with an adjustable-height crossbar and two retaining bolts for securing a Group 27 or 27M battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this tray fit a Group 24 or Group 31 battery?\u003c\/strong\u003e The Attwood 9091-5 is designed specifically for Group 27 and 27M battery dimensions, not other group sizes.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989675716827,"sku":"ATT-9091-5","price":9.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71cORJkDfBL.jpg?v=1784487147"},{"product_id":"attwood-9097-5-heavy-duty-adjustable-battery-tray-black-fits-group-24-24m-24f-marine-batteries-10-5-8-x-6-3-4","title":"Attwood 9097-5 Heavy-Duty Adjustable Battery Tray for Group 24\/24M\/24F Batteries, Black Plastic","description":"\u003cp\u003eThe Attwood 9097-5 is a heavy-duty, all-plastic battery tray built to hold Group 24, 24M, and 24F marine batteries securely in place. Molded from non-corrosive black plastic, it eliminates the rust and strap degradation common with metal trays and webbing-strap mounts, making it a durable choice for boats operating in wet, salt-air environments. An adjustable-height crossbar expands from 7 inches to 9.5 inches, allowing the tray to accommodate taller Group 24 batteries while still holding them firmly against vibration and movement underway.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the tray comes with two retaining bolts, and the crossbar mounts using #10 fasteners once positioned to match the battery's height. The base measures 10-5\/8 inches by 6-3\/4 inches, footprint-matching standard Group 24 battery boxes and trays. The 9097-5 is a patented design that meets ABYC Standard E-10 and U.S. Coast Guard requirements for marine battery mounting, and it is manufactured in the USA and backed by a limited 1-year warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9097-5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Group Size:\u003c\/strong\u003e 24, 24M, 24F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimensions:\u003c\/strong\u003e 10-5\/8 inches x 6-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossbar Height:\u003c\/strong\u003e 7 inches to 9.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Non-corrosive black plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Tray, adjustable-height crossbar, two retaining bolts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 fasteners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e Meets ABYC Standard E-10 and U.S. Coast Guard requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Patented\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited 1-year warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697909756\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Group 24, 24M, and 24F marine batteries.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat battery sizes fit the Attwood 9097-5 battery tray?\u003c\/strong\u003e The Attwood 9097-5 is designed for Group 24, 24M, and 24F marine batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the height of the Attwood 9097-5 battery tray adjustable?\u003c\/strong\u003e Yes, the 9097-5 has an adjustable-height crossbar that expands from 7 inches to 9.5 inches to accommodate taller Group 24 batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 9097-5 battery tray made of?\u003c\/strong\u003e It is molded from heavy-duty, non-corrosive black plastic with no metal components, so it will not rust or corrode in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 9097-5 battery tray meet marine safety standards?\u003c\/strong\u003e The Attwood 9097-5 meets ABYC Standard E-10 and U.S. Coast Guard requirements for marine battery mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included with the Attwood 9097-5 battery tray?\u003c\/strong\u003e The 9097-5 ships with the tray, an adjustable-height crossbar, and two retaining bolts for mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Attwood 9097-5 battery tray?\u003c\/strong\u003e The base measures 10-5\/8 inches by 6-3\/4 inches, with a crossbar height adjustable from 7 inches to 9.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 9097-5 battery tray weigh?\u003c\/strong\u003e The 9097-5 weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install the Attwood 9097-5?\u003c\/strong\u003e The crossbar on the 9097-5 installs with #10 fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 9097-5 tray resistant to corrosion?\u003c\/strong\u003e Yes, since the 9097-5 is built entirely from non-corrosive black plastic with no metal parts or webbing straps to rust or fray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Attwood 9097-5 battery tray manufactured?\u003c\/strong\u003e The 9097-5 is made in the USA and backed by a limited 1-year warranty.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989675847899,"sku":"ATT-9097-5","price":11.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61ccNc_4QJL.jpg?v=1784487160"},{"product_id":"attwood-9098-5-group-27-marine-battery-tray-adjustable-non-corrosive-black-plastic-abyc-e-10-uscg-compliant","title":"Attwood Adjustable Battery Tray for 27\/27M\/27F Series Batteries, 12-1\/8 x 6-3\/4 Inch","description":"\u003cp\u003eThe Attwood 9098-5 is an adjustable battery tray built to securely hold a single Group 27, 27M, or 27F marine battery in place aboard a boat. The tray measures 12-1\/8 inches by 6-3\/4 inches and is molded from heavy-duty, non-corrosive black plastic that resists the saltwater spray, fuel, and chemical exposure common in marine bilges and battery compartments. An adjustable-height crossbar lets the tray accommodate battery case variations within the 27 series, and it clamps the battery down securely so it cannot shift or tip while underway. Two retaining bolts are included with the tray for a complete, ready-to-install package.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the tray mounts to a flat surface using #10 fasteners, and the adjustable crossbar is then tightened down over the top of the battery to hold it firmly in the tray. The design meets ABYC Standard E-10, the industry benchmark for safe storage and mounting of marine batteries, and it also meets U.S. Coast Guard requirements for battery retention. The tray's construction is a patented design from Attwood. This makes the 9098-5 a straightforward upgrade or replacement for boat owners looking to keep a Group 27, 27M, or 27F battery properly secured and compliant with marine safety standards.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9098-5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Group Size Compatibility:\u003c\/strong\u003e 27, 27M, 27F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 12-1\/8 inches x 6-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Non-corrosive black plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.1093 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Adjustable-height crossbar and two retaining bolts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e Meets ABYC Standard E-10 and U.S. Coast Guard requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Patented\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Fasteners:\u003c\/strong\u003e #10 fasteners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697909855\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat battery sizes fit the Attwood 9098-5 battery tray?\u003c\/strong\u003e The Attwood 9098-5 is sized for Group 27, 27M, and 27F marine batteries, measuring 12-1\/8 inches by 6-3\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 9098-5 battery tray adjustable?\u003c\/strong\u003e Yes, it includes an adjustable-height crossbar that lets it accommodate battery case height variations within the 27, 27M, and 27F group sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 9098-5 made from?\u003c\/strong\u003e It is molded from heavy-duty, non-corrosive black plastic designed to hold up in marine battery compartments and bilge environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 9098-5 meet marine safety standards?\u003c\/strong\u003e It meets ABYC Standard E-10 and U.S. Coast Guard requirements for battery mounting and retention.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Attwood 9098-5 battery tray?\u003c\/strong\u003e The tray ships with two retaining bolts along with the adjustable-height crossbar; #10 fasteners are needed to mount the tray itself and are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 9098-5 battery tray installed?\u003c\/strong\u003e It mounts to a flat surface with #10 fasteners, and the adjustable crossbar is then tightened down over the battery to secure it in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 9098-5 weigh?\u003c\/strong\u003e The 9098-5 battery tray weighs 1.1093 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 9098-5 battery tray?\u003c\/strong\u003e It measures 12-1\/8 inches by 6-3\/4 inches, sized for Group 27, 27M, and 27F batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 9098-5 a patented design?\u003c\/strong\u003e Yes, the 9098-5 battery tray features a patented Attwood design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Attwood 9098-1 and 9098-5?\u003c\/strong\u003e Both are 27-series adjustable battery trays with the same 12-1\/8 inch by 6-3\/4 inch footprint, but the 9098-5 and 9098-1 are separate part numbers, so buyers should order using the exact part number needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 9098-5 be used for a Group 24 battery?\u003c\/strong\u003e No, the 9098-5 is sized for Group 27, 27M, and 27F batteries; Attwood offers a separate 24 Series tray for Group 24, 24M, and 24F batteries.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989675946203,"sku":"ATT-9098-5","price":11.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_b20357e3-068b-4452-8ea2-0e94abdf24c1.jpg?v=1785353543"},{"product_id":"moeller-042204-roto-molded-marine-battery-box-for-one-4d-battery-23-63-x-12-5-x-14-63","title":"Moeller 4D Battery Box, Roto-Molded, Fits One 4D Battery, 23.63 x 12.5 x 14.63 Inches","description":"\u003cp\u003eThe Moeller 4D Battery Box is a roto-molded marine battery box built to hold one 4D battery securely on board. Roto-molding produces a one-piece, seamless shell that resists cracking and holds up to the vibration, moisture, and impact common in a boat's battery compartment. The box measures 23.63 inches by 12.5 inches by 14.63 inches, sized specifically for a single 4D battery, and includes a marine terminal design to keep battery connections organized and protected.\u003c\/p\u003e\u003cp\u003eThis battery box is intended for use aboard boats to contain and protect a 4D battery from movement, corrosion exposure, and accidental contact with metal components nearby. Its enclosed design helps keep the battery compartment tidy and reduces the risk of a battery shifting while underway. Moeller has built fuel system and marine storage products for more than 25 years, and this battery box reflects that same focus on durable, functional marine hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 042204\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 4D Battery Box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Capacity:\u003c\/strong\u003e One 4D Battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 23.63 inches W x 12.5 inches D x 14.63 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.95 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Roto-molded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal:\u003c\/strong\u003e Marine Terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729422045\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size battery does the Moeller 042204 battery box hold?\u003c\/strong\u003e The Moeller 042204 battery box is sized for one 4D battery and measures 23.63 inches by 12.5 inches by 14.63 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this battery box made for marine use?\u003c\/strong\u003e Yes, the Moeller 4D Battery Box (part number 042204) is a marine battery box with a Marine Terminal design intended for use aboard boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 4D battery box weigh?\u003c\/strong\u003e It weighs 8.95 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Moeller 042204 battery box made from?\u003c\/strong\u003e The Moeller 4D Battery Box uses a roto-molded construction, which produces a seamless, one-piece shell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Moeller 042204 fit a Group 27 or Group 31 battery?\u003c\/strong\u003e No, the Moeller 042204 battery box is sized specifically for one 4D battery, not Group 27 or Group 31 sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the battery box come with a lid?\u003c\/strong\u003e The dossier for the Moeller 4D Battery Box (042204) does not specify a separate lid component beyond the box itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this battery box hold two batteries?\u003c\/strong\u003e No, the Moeller 042204 is designed to hold one 4D battery only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Moeller 4D battery box resistant to corrosion?\u003c\/strong\u003e Roto-molded construction, as used in the Moeller 042204 battery box, forms a seamless shell that helps resist the moisture exposure common in marine battery compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the terminal type on the Moeller 042204 battery box?\u003c\/strong\u003e It features a Marine Terminal, designed to keep battery connections organized within the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere would I install a Moeller 4D battery box on a boat?\u003c\/strong\u003e The Moeller 4D Battery Box (042204) is intended for the battery compartment of a boat, where it holds and protects a 4D battery.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991091720411,"sku":"MOE-042204","price":249.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/042204__91985.1558191247.500.750.jpg?v=1785188311"},{"product_id":"moeller-roto-molded-marine-battery-box-for-one-8d-battery-low-profile-black-042208","title":"Moeller 8D Battery Box, Roto-Molded, Low Profile, 25 x 15 x 13.06 Inches, Black","description":"\u003cp\u003eThe Moeller 8D Battery Box is a roto-molded plastic enclosure built to hold a single Group 8D marine battery securely aboard a boat. Roto-molding produces a one-piece, seamless shell that resists cracking, corrosion, and the vibration and impact stress common in marine environments, making it a durable alternative to open battery trays or improvised mounting. The low-profile design fits the 25 x 15 x 13.06 inch footprint of an 8D battery while keeping overall installed height to a minimum, which helps in tight engine compartments, battery lockers, and under-seat installations where headroom is limited.\u003c\/p\u003e\u003cp\u003eThe enclosed design helps contain battery terminals and protects surrounding equipment, wiring, and crew from accidental contact and from acid or corrosion exposure if a battery leaks. Its black plastic construction will not rust or corrode like metal battery boxes, and the material is suited to the damp, salt-exposed conditions typical of marine use. The box is intended for a single 8D battery and is a straightforward drop-in solution for boat owners upgrading their battery storage or replacing a damaged or open tray.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 042208\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Battery Box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Compatibility:\u003c\/strong\u003e One 8D battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 25 x 15 x 13.06 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight Profile:\u003c\/strong\u003e Low\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11.59 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729422083\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size battery does the Moeller 042208 battery box hold?\u003c\/strong\u003e The Moeller 042208 battery box is sized for one Group 8D battery, with interior dimensions of 25 x 15 x 13.06 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this battery box a low-profile or high-profile design?\u003c\/strong\u003e Yes, the Moeller 042208 is the low-profile version, built to minimize installed height for tight battery lockers and compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Moeller 8D battery box made from?\u003c\/strong\u003e It is made from roto-molded plastic, a seamless one-piece construction that resists cracking, corrosion, and impact in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this box hold one battery or two?\u003c\/strong\u003e The Moeller 042208 battery box is designed to hold a single 8D battery, not a dual-battery setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the Moeller 042208 battery box come in?\u003c\/strong\u003e It is black, matching Moeller's standard finish for its roto-molded marine battery boxes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 8D battery box weigh?\u003c\/strong\u003e The Moeller 042208 battery box weighs 11.59 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this battery box protect against corrosion?\u003c\/strong\u003e Yes, because it is molded from plastic rather than metal, the Moeller 042208 will not rust or corrode the way a metal battery box can in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Moeller 042208 suitable for saltwater boats?\u003c\/strong\u003e Yes, its plastic roto-molded construction is built to withstand the damp, salt-exposed conditions common on saltwater boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the battery box include a lid or tie-down strap?\u003c\/strong\u003e The dossier for the Moeller 042208 does not specify included lid or strap hardware, so buyers should confirm accessory inclusions before installing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Moeller 8D battery box, part number 042208?\u003c\/strong\u003e The UPC for the Moeller 042208 8D battery box is 739729422083.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this box be used for engine compartment or under-seat battery mounting?\u003c\/strong\u003e Its low-profile design makes the Moeller 042208 well suited to installations with limited headroom, such as engine compartments or under-seat battery lockers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Moeller 042208 a genuine Moeller part?\u003c\/strong\u003e Yes, part number 042208 is a genuine Moeller Marine 8D battery box, not an aftermarket equivalent.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991091917019,"sku":"MOE-042208","price":251.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/419pFnsefiL.jpg?v=1784491368"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/narrow-battery-tray-24-series-poly-strap-narrow-battery-holder-tray-30138207404075_274ff268-dcf8-4a28-9df8-65c0806cfe9e.jpg?v=1785359966","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-electrical-system-batteries-battery-management.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}