{"title":"Switch \u0026 Accessory Panels","description":null,"products":[{"product_id":"sierra-sp21030-10-function-touch-switch-panel-12v-24v-ip67-compact-marine-digital-control-panel-with-remote-relay-box","title":"Sierra SP21030 10 Function Touch Panel, 12V\/24V Backlit Switch Panel with IP67 Rated Faceplate","description":"\u003cp\u003eThe Sierra SP21030 is a 10 function touch panel designed to control multiple electrical circuits from a single, ultra-compact control point. The panel uses a PET membrane touch surface with backlit push buttons for easy readability in low-light and nighttime conditions. Each of the 10 buttons can be individually programmed as either a latching or momentary circuit, making the panel suitable for standard on\/off accessories as well as momentary applications such as horns or wipers.\u003c\/p\u003e\u003cp\u003eCircuit protection is built directly into the panel with a resettable PPTC fuse rated at 10 amps per function, and the panel supports a maximum cumulative load of 35 amps across a voltage range of 11 to 30VDC, allowing use on both 12V and 24V systems. The touch panel connects to a separate control relay box using a micro-USB style cable, and the flexible wiring lets the control box be remote mounted up to 1 meter away from the touch panel itself, simplifying installation in tight helm areas. The panel itself requires almost no mounting depth and fits into a 15mm cut-out, and the design is up to 60 percent smaller than traditional switch panels of similar function count.\u003c\/p\u003e\u003cp\u003eThe panel face carries an IP67 rating for protection against dust and temporary water immersion, while the control box and wiring allow flexible placement behind the dash. Housed in a durable plastic construction with a multi-color LED-lit faceplate, the Sierra SP21030 is built for marine electrical panel upgrades and new installations alike.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SP21030\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Panel, 10 Function Touch 12V\/24V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Functions:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e 11-30VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Rating:\u003c\/strong\u003e 10A per function at 12VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Cumulative Amp Rating:\u003c\/strong\u003e 35A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Protection:\u003c\/strong\u003e Built-in resettable PPTC fuse per function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgrammable Circuits:\u003c\/strong\u003e Latching or momentary per function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection:\u003c\/strong\u003e IP67 rated (panel only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e CE certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate Material:\u003c\/strong\u003e PET membrane touch panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Dimensions:\u003c\/strong\u003e 91mm x 75mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Box Dimensions:\u003c\/strong\u003e 136mm x 90mm x 32mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Cut-Out:\u003c\/strong\u003e 15mm hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282382360\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many circuits does the Sierra SP21030 control?\u003c\/strong\u003e The SP21030 controls 10 separate functions from one touch panel, with each button individually programmable as a latching or momentary switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan each button be set for momentary use, like a horn or wiper?\u003c\/strong\u003e Yes, every function on the SP21030 touch panel can be programmed as either latching (on\/off) or momentary, which makes it suitable for horn or wiper circuits as well as standard accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this panel rated for 12V or 24V systems?\u003c\/strong\u003e The SP21030 has a voltage rating of 11-30VDC, so it works on both 12V and 24V boat electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage rating per switch on the SP21030?\u003c\/strong\u003e Each of the 10 functions on the Sierra SP21030 is rated for 10A at 12VDC, with a maximum cumulative load of 35A across the whole panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SP21030 have built-in circuit protection?\u003c\/strong\u003e Yes, each function has its own built-in resettable PPTC fuse, so an overloaded circuit trips and resets without needing to replace a fuse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow deep of a mounting cut-out does this panel need?\u003c\/strong\u003e The SP21030 touch panel needs only a 15mm cut-out hole and almost no mounting depth, since the control relay box mounts separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the control box be mounted away from the touch panel?\u003c\/strong\u003e Yes, the SP21030 uses flexible wiring with a micro-USB style cable that allows the control relay box to be remote mounted up to 1 meter from the touch panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra SP21030 waterproof?\u003c\/strong\u003e The touch panel face carries an IP67 rating, meaning it is protected against dust and temporary immersion; this rating applies to the panel only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the physical dimensions of the touch panel and control box?\u003c\/strong\u003e The SP21030 touch panel measures 91mm x 75mm, while the separate control box measures 136mm x 90mm x 32mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SP21030 faceplate made from?\u003c\/strong\u003e The faceplate is a PET membrane touch surface, backed by a plastic housing, with backlit push buttons for visibility in low light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra SP21030 weigh?\u003c\/strong\u003e The SP21030 10 function touch panel weighs 1.2 pounds.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457959643,"sku":"SIE-SP21030","price":147.16,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SP21030__22999.1722517379.500.750.jpg?v=1785188306"},{"product_id":"sea-dog-403020-1-double-gang-wall-switch-panel-304-stainless-steel-2-spdt-switches-12vdc-15a","title":"Sea-Dog Double Gang Wall Switch Panel 403020-1 - 304 Stainless Steel, 12V, 2 SPDT Switches","description":"\u003cp\u003eThe Sea-Dog 403020-1 is a double gang wall switch panel built for marine electrical systems that need two independent switch positions in one clean housing. It carries two black SPDT (single pole, double throw) switches, each rated for 12VDC at 15 amps, giving you two separate on-off controls for lighting, pumps, fans, or other 12-volt accessories from a single mounting plate. The panel itself is constructed of stamped 304 stainless steel, a corrosion-resistant material suited to the saltwater and high-humidity conditions found on boats, where standard plastic or painted-steel hardware tends to corrode or discolor over time.\u003c\/p\u003e\u003cp\u003eThe panel measures 2 inches by 2-1\/2 inches by 1 inch, a compact footprint that fits into helm stations, cabin walls, and equipment panels without requiring a large cutout. It installs using two #6 RH fasteners (fasteners not included), so you will need to have these on hand or match them to your existing panel hardware. Because it is a double gang design, it is intended for installers who need to consolidate two switch functions into one panel opening rather than running two single-switch units side by side. This is a wall-mount unit, not a wired switch assembly with pre-terminated leads, so wiring is completed at installation to suit the specific 12-volt circuit being controlled.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 403020-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Switches:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e SPDT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 2-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 15 Amps per switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Stainless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #6 RH (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Dimensions (A x B x C):\u003c\/strong\u003e 2 inches x 2-1\/2 inches x 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Wall Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514403122\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many switches does the Sea-Dog 403020-1 wall panel have?\u003c\/strong\u003e The Sea-Dog 403020-1 is a double gang panel with two separate black SPDT switches, letting you control two 12-volt circuits from one mounting location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the voltage and amperage rating of this switch panel?\u003c\/strong\u003e Each switch on the 403020-1 is rated 12VDC at 15 amps, so the panel supports two independent 12-volt circuits up to 15 amps each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 403020-1 panel made of?\u003c\/strong\u003e It is made of stamped 304 stainless steel, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this panel suitable for saltwater boat use?\u003c\/strong\u003e Yes, the 304 stainless steel construction of the 403020-1 is corrosion resistant, making it appropriate for saltwater marine installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 403020-1 wall switch panel?\u003c\/strong\u003e The panel measures 2 inches by 2-1\/2 inches by 1 inch, a compact size designed to fit standard small switch cutouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 403020-1 weigh?\u003c\/strong\u003e This wall switch panel weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install this switch panel?\u003c\/strong\u003e The 403020-1 mounts with two #6 RH fasteners, which are not included and must be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of switches are used on this panel?\u003c\/strong\u003e Both switches are SPDT (single pole, double throw) type, wired for 2-way circuit control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a single or double switch panel?\u003c\/strong\u003e The 403020-1 is the double switch (double gang) version, featuring two switches; a single switch version is available as a different part number for installations that only need one switch position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 403020-1 include any wiring or connectors?\u003c\/strong\u003e No, the panel is supplied as the switch unit itself; wiring and fasteners for mounting are not included and are completed during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the panel have?\u003c\/strong\u003e The 403020-1 has a stainless finish over its stamped 304 stainless steel body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 403020-1?\u003c\/strong\u003e The UPC for the Sea-Dog 403020-1 double gang wall switch panel is 035514403122.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988770435291,"sku":"S-D-403020-1","price":14.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7150.jpg?v=1784429072"},{"product_id":"sea-dog-403010-1-single-switch-wall-panel-304-stainless-steel-marine-spdt-toggle-switch-12vdc-15a","title":"Sea-Dog Stainless Steel Wall Switch Panel 403010-1, Single SPDT Toggle Switch, 12V 15 Amp","description":"\u003cp\u003eThe Sea-Dog 403010-1 is a single-switch wall panel built for onboard electrical circuits that need a compact, corrosion resistant control point. It is constructed of stamped 304 stainless steel, giving it the durability to hold up in a marine environment where moisture and salt air quickly degrade lesser materials. The panel carries one black SPDT toggle switch rated 12VDC at 15 amps, making it suitable for switching lighting, pumps, and other 12-volt accessories from a single, clearly labeled point on a helm or cabin wall.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the panel mounts with two #6 RH fasteners (fasteners are not included, so have your own on hand before installing). Its compact footprint measures 2 inches by 2-1\/2 inches by 1 inch, keeping the installation cutout small and making it easy to fit into tight helm or console layouts. For installations that require switching two separate circuits from one panel, Sea-Dog also offers a two-switch version, part number 403020-1, which shares the same stainless steel construction and mounting style.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 403010-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Wall Switch Panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Switches:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e SPDT Toggle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 15 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Stainless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (A x B x C):\u003c\/strong\u003e 2 inches x 2-1\/2 inches x 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #6 RH, 2 required (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514403115\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 403010-1?\u003c\/strong\u003e The 403010-1 is a single-switch wall panel from Sea-Dog, built from stamped 304 stainless steel and fitted with one black SPDT toggle switch rated 12VDC at 15 amps for onboard electrical circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 403010-1 made of stainless steel?\u003c\/strong\u003e Yes, the panel is constructed of stamped 304 stainless steel for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and amperage is the switch rated for?\u003c\/strong\u003e The switch on the 403010-1 panel is rated 12VDC at 15 amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many switches does this panel have?\u003c\/strong\u003e The 403010-1 has one SPDT toggle switch; a two-switch version is available separately as part number 403020-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install the 403010-1?\u003c\/strong\u003e Installation requires two #6 RH fasteners, which are not included with the 403010-1 panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 403010-1 wall switch panel?\u003c\/strong\u003e The panel measures 2 inches by 2-1\/2 inches by 1 inch (A x B x C dimensions).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 403010-1 weigh?\u003c\/strong\u003e The 403010-1 wall switch panel weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a two-switch version of this panel?\u003c\/strong\u003e Yes, Sea-Dog offers a two-switch panel, part number 403020-1, built with the same stainless steel construction as the single-switch 403010-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of switch is used on the 403010-1?\u003c\/strong\u003e A black SPDT toggle switch is used on the 403010-1 panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 403010-1 hold up to saltwater exposure?\u003c\/strong\u003e Yes, it is made of corrosion resistant stamped 304 stainless steel, which is well suited to marine and saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 403010-1 come with mounting hardware?\u003c\/strong\u003e No, the #6 RH fasteners needed for mounting the 403010-1 are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 403010-1 a single-gang or double-gang switch panel?\u003c\/strong\u003e The 403010-1 is a single-gang panel with one switch; the double-gang, two-switch equivalent is part number 403020-1.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988771320027,"sku":"S-D-403010-1","price":11.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7150_c5114818-e8b9-45b4-bcad-d2f11035f62b.jpg?v=1784429082"},{"product_id":"sea-dog-422010-1-aluminum-vertical-4-gang-rocker-switch-panel-illuminated-spst-on-off-12vdc-with-fuse-holders","title":"Sea-Dog 422010-1 Aluminum Vertical 4-Gang Switch Panel, 12 Volt 37 Amp, 4-7\/8 x 4-1\/2 Inch","description":"\u003cp\u003eThe Sea-Dog 422010-1 is a vertical 4-gang switch panel built to control accessory circuits on a boat or personal watercraft from a single, compact location. Each of its 4 illuminating rocker switches operates on a simple on-off basis, letting you see at a glance which circuits are live even in low light. The panel is rated for 12 volts with a 37 amp total capacity, and each individual circuit is protected by its own 10 amp fuse holder with a screw terminal connection, so a single overloaded accessory does not take down the whole panel.\u003c\/p\u003e\u003cp\u003eConstruction is stamped anodized aluminum in a black finish, giving the panel a durable, corrosion-resistant housing suited to a marine environment. It carries an IP54 ingress protection rating, meaning it is protected against dust intrusion and splashing water from any direction, an important feature for a panel mounted in an open cockpit or helm area. The panel measures 4-7\/8 inches by 4-1\/2 inches overall and mounts into a cutout of 3-5\/16 inches by 3-1\/2 inches, making it a straightforward drop-in replacement or new install wherever a standard vertical 4-switch layout is needed.\u003c\/p\u003e\u003cp\u003eShould the red switch lens or insert ever need replacing, Sea-Dog offers a dedicated replacement red insert (422199-1) that is compatible with this switch panel as well as other Sea-Dog switch panel models, so the panel itself does not need to be replaced for a worn lens.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 422010-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Switches:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rocker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e On-Off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Voltage Rating:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Amperage:\u003c\/strong\u003e 37 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual Circuit Rating:\u003c\/strong\u003e 10 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e Fuse Holder (10 Amp)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw Terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 4-7\/8 inches x 4-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutout Size:\u003c\/strong\u003e 3-5\/16 inches x 3-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514423359\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and amperage is the Sea-Dog 422010-1 switch panel rated for?\u003c\/strong\u003e The panel is rated for 12 volts with a 37 amp total capacity, and each of its 4 individual circuits is limited to 10 amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many switches does the 422010-1 panel have?\u003c\/strong\u003e This is a 4-gang vertical panel with 4 illuminating rocker switches, each operating on a simple on-off basis.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 422010-1 switch panel made of?\u003c\/strong\u003e It is constructed of stamped anodized aluminum with a black finish, giving the Sea-Dog 422010-1 corrosion resistance for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this switch panel?\u003c\/strong\u003e The Sea-Dog 422010-1 measures 4-7\/8 inches by 4-1\/2 inches overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cutout size do I need to install the 422010-1?\u003c\/strong\u003e A cutout of 3-5\/16 inches by 3-1\/2 inches is required to mount this switch panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 422010-1 switch panel waterproof?\u003c\/strong\u003e It carries an IP54 ingress protection rating, protecting against dust and splashing water from any direction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of electrical connections does this panel use?\u003c\/strong\u003e Each circuit on the 422010-1 uses a screw terminal connection paired with an integrated 10 amp fuse holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog 422010-1 switch panel?\u003c\/strong\u003e The panel has a black finish over its anodized aluminum housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the switch lens on this panel be replaced if it breaks?\u003c\/strong\u003e Yes, Sea-Dog makes a replacement red insert, part number 422199-1, that is compatible with the 422010-1 switch panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this switch panel suitable for personal watercraft as well as boats?\u003c\/strong\u003e The Sea-Dog 422010-1 is designed for use on boats and personal watercraft.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988779249883,"sku":"S-D-422010-1","price":39.24,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5042_e2ed4618-f16d-456c-ba17-33f3d82ef81f.jpg?v=1784429467"},{"product_id":"sea-dog-422210-1-aluminum-horizontal-6-gang-rocker-switch-panel-12v-illuminated-spst-on-off-with-fuse-holders","title":"Sea Dog Line 6-Gang Horizontal Aluminum Rocker Switch Panel, Part Number 422210-1","description":"\u003cp\u003eThe Sea Dog Line 422210-1 is a 6-gang horizontal aluminum switch panel built to give boaters independent manual control over six separate electrical circuits from a single mounting location. Each of the six positions uses a rocker-style switch with a normally-open contact and screw terminal connections, making it straightforward to wire into a 12-volt marine electrical system. The panel is rated IP54 for resistance to splashing water and dust, and it carries UL and cULus safety listings, so it is built to recognized electrical standards for onboard use. The panel mount design allows the unit to be installed into a standard horizontal panel cutout, with the aluminum housing offering better corrosion resistance than typical automotive-grade panels when exposed to a marine environment. Operation is manual (touch\/rocker actuation), and the panel is finished in black. If an indicator lens ever becomes cloudy or damaged, Sea Dog Line offers a separate replacement red insert, part number 422199-1, that is compatible with this 422210 series panel as well as the 422010 and 422110 switch panels, so the lens can be serviced without replacing the entire panel. This panel is a straightforward retrofit or new-install option for helm stations, accessory panels, or any application needing six independently switched circuits in one compact footprint.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea Dog Line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 422210-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Switch Positions:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rocker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum panel with plastic rocker switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety Listing:\u003c\/strong\u003e UL, cULus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Wattage:\u003c\/strong\u003e 360 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7.25 x 11.13 x 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.628 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514423380\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Indicator Lens:\u003c\/strong\u003e Red insert 422199-1 (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many switches does the Sea Dog Line 422210-1 panel have?\u003c\/strong\u003e The 422210-1 panel has six rocker switch positions, each wired as an independent normally-open circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this switch panel made of?\u003c\/strong\u003e Part number 422210-1 uses an aluminum panel housing with plastic rocker switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 422210-1 panel waterproof?\u003c\/strong\u003e It carries an IP54 ingress protection rating, meaning it is protected against splashing water and dust, though it is not fully submersible.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this switch panel?\u003c\/strong\u003e The 422210-1 measures 7.25 x 11.13 x 2.5 inches overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea Dog Line 422210-1 weigh?\u003c\/strong\u003e This switch panel weighs 0.628 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of terminals does the 422210-1 use for wiring?\u003c\/strong\u003e Each switch position on the 422210-1 uses screw terminal connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this panel safety listed?\u003c\/strong\u003e Yes, the 422210-1 is UL and cULus listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum wattage rating for this panel?\u003c\/strong\u003e The 422210-1 is rated for a maximum of 360 watts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the indicator lenses on this panel be replaced?\u003c\/strong\u003e Yes, Sea Dog Line offers a separate red replacement insert, part number 422199-1, that fits the 422210 switch panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 422210-1 panel mounted?\u003c\/strong\u003e It is a panel-mount design, installed through a standard horizontal panel cutout with screw terminal wiring on the back.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this switch panel?\u003c\/strong\u003e The Sea Dog Line 422210-1 is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 422210-1 use momentary or standard rocker switches?\u003c\/strong\u003e The panel uses standard rocker switches operated manually, with normally-open contacts for each of the six circuits.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988779315419,"sku":"S-D-422210-1","price":47.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5047.jpg?v=1784429468"},{"product_id":"sea-dog-422110-1-aluminum-vertical-6-gang-rocker-switch-panel-12v-illuminated-spst-on-off-with-fuse-holders","title":"Sea-Dog 422110-1 Aluminum Vertical DC Switch Panel, 6 Rocker Switches","description":"\u003cp\u003eThe Sea-Dog 422110-1 is a vertical 12 Volt DC switch panel built for boats and other 12V applications where multiple circuits need clean, centralized control. The panel carries 6 SPST On\/Off rocker switches, each illuminated so the switch positions stay visible in low light or at night. Every switch position includes its own 10 Amp 12VDC fuse holder, so each circuit gets individual over-current protection without running a separate fuse block.\u003c\/p\u003e\u003cp\u003eConstruction is stamped anodized aluminum, giving the panel a corrosion-resistant housing suited to a marine environment. Wiring is done via screw terminal connections on the back of the panel. The panel is designed for panel mount installation, with an outer face of 6-1\/2 inches H x 4-1\/2 inches W and an inner cutout dimension of 3-15\/16 inches H x 3-1\/2 inches W for flush-mounting into a helm, console, or electrical panel.\u003c\/p\u003e\u003cp\u003eThis switch panel is suited to controlling 12VDC accessories such as lights, motors, and similar low-voltage devices, with each of the 6 switches operating its own independent, fused circuit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 422110-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Switches:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e SPST On\/Off rocker, illuminated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuse Holders:\u003c\/strong\u003e Integrated 10 Amp 12VDC fuse holder per switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e 6-1\/2 inches H x 4-1\/2 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner (Cutout) Dimensions:\u003c\/strong\u003e 3-15\/16 inches H x 3-1\/2 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 10 Amps per circuit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e Screw terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.65 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514423373\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many switches does the Sea-Dog 422110-1 switch panel have?\u003c\/strong\u003e The Sea-Dog 422110-1 has 6 SPST On\/Off rocker switches on a single vertical panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the switches on this panel illuminated?\u003c\/strong\u003e Yes, all 6 rocker switches on the 422110-1 panel are illuminated, making the switch positions easy to see in low-light conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 422110-1 panel include fuse protection?\u003c\/strong\u003e Each of the 6 switch positions on the 422110-1 includes its own integrated 10 Amp 12VDC fuse holder, so every circuit is individually protected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the panel made of?\u003c\/strong\u003e The Sea-Dog 422110-1 is constructed of stamped anodized aluminum, which resists corrosion in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and amperage is this switch panel rated for?\u003c\/strong\u003e The 422110-1 is rated for 12 Volts DC, with a 10 Amp fuse holder on each individual switch circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the outer and cutout dimensions of the 422110-1?\u003c\/strong\u003e The panel measures 6-1\/2 inches H x 4-1\/2 inches W on the outer face, with an inner cutout of 3-15\/16 inches H x 3-1\/2 inches W for flush mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the panel wired?\u003c\/strong\u003e The Sea-Dog 422110-1 connects via screw terminals on the back of the panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this switch panel weigh?\u003c\/strong\u003e The Sea-Dog 422110-1 switch panel weighs 0.65 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this panel mounted flush or surface mounted?\u003c\/strong\u003e The 422110-1 is a panel mount design, intended to be flush-mounted into a helm, console, or electrical panel using its inner cutout dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of devices can be controlled with this switch panel?\u003c\/strong\u003e Each of the 6 fused circuits on the 422110-1 can control 12VDC accessories such as lights, motors, and similar low-voltage devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 422110-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, part number 422110-1 is a genuine Sea-Dog aluminum vertical DC switch panel.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988779348187,"sku":"S-D-422110-1","price":47.57,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5046.jpg?v=1784429473"},{"product_id":"sea-dog-424605-1-water-resistant-5-toggle-switch-panel-with-12v-power-socket-marine-abs-rocker-panel","title":"Sea-Dog Water Resistant Toggle Switch Panel with Power Socket, 5 Switches, 12 Volt - 424605-1","description":"\u003cp\u003eThe Sea-Dog Water Resistant Toggle Switch Panel (424605-1) is a five-circuit toggle switch panel built for boat helms, consoles, and other marine electrical panels where reliable switching and a clean layout matter. Each of the five toggle switches is rated 15A at 12VDC, giving enough capacity for lighting, pumps, fans, and other common 12-volt accessories. A built-in 12VDC power socket is included on the panel for charging devices or running plug-in accessories directly from the helm, and each switch circuit is protected by its own inline fuse holder so a single overloaded circuit does not take down the whole panel. A decal sheet is included so each switch can be labeled for its function, keeping the panel easy to read at a glance.\u003c\/p\u003e\u003cp\u003eThe panel body is constructed of injection molded ABS, chosen for its resistance to the water spray and humidity typical of a marine environment. It installs with four #6 RH fasteners (fasteners not included), so standard hardware on hand can be used for mounting into a helm or dash panel cutout sized to the panel's dimensions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 424605-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Switches:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Toggle switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Rating:\u003c\/strong\u003e 15A, 12VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Socket:\u003c\/strong\u003e 12VDC power socket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuse Protection:\u003c\/strong\u003e Inline fuse holders (one per circuit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Dimensions (A x B x C x D):\u003c\/strong\u003e 3-3\/4 inches x 4-1\/4 inches x 3-3\/8 inches x 3-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.724 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Four #6 RH fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Accessories:\u003c\/strong\u003e Decal sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514425575\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many switches does the Sea-Dog 424605-1 switch panel have?\u003c\/strong\u003e The Sea-Dog 424605-1 panel has five toggle switches, each rated 15A at 12VDC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch panel include a power socket?\u003c\/strong\u003e Yes, the 424605-1 panel includes a built-in 12VDC power socket alongside its five toggle switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 424605-1 switch panel made of?\u003c\/strong\u003e It is constructed of injection molded ABS, a material chosen for durability in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 424605-1 switch panel waterproof?\u003c\/strong\u003e The 424605-1 is a water resistant toggle switch panel, designed to hold up to spray and moisture typical at a boat helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 424605-1 switch panel?\u003c\/strong\u003e The panel measures 3-3\/4 inches by 4-1\/4 inches by 3-3\/8 inches by 3-3\/8 inches (A x B x C x D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 424605-1 switch panel weigh?\u003c\/strong\u003e The 424605-1 switch panel weighs 0.724 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 424605-1 switch panel mounted?\u003c\/strong\u003e It installs with four #6 RH fasteners, which are not included, into a panel or dash cutout matching its dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the circuits on this panel fused?\u003c\/strong\u003e Yes, each of the five switch circuits on the 424605-1 panel has its own inline fuse holder for individual circuit protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the Sea-Dog 424605-1 switch panel rated for?\u003c\/strong\u003e The panel and its five toggle switches are rated for 12 Volt DC systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sea-Dog 424605-1 switch panel?\u003c\/strong\u003e The panel ships with a decal sheet for labeling each of the five switches by function; mounting fasteners are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 424605-1 panel and Sea-Dog's USB version?\u003c\/strong\u003e The 424605-1 has a standard 12VDC power socket, while Sea-Dog's other panel variants add USB charging ports and LED-lit switches; those are separate part numbers.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988812378331,"sku":"S-D-424605-1","price":74.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7155.jpg?v=1784429501"},{"product_id":"sea-dog-425800-1-wave-rocker-switch-breaker-panel-5-spst-illuminated-switches-with-thermal-breakers-12vdc-marine","title":"Sea-Dog Wave Rocker Switch Breaker Panel 425800-1, 5-Switch 12VDC Marine Panel with Decals","description":"\u003cp\u003eThe Sea-Dog Wave Rocker Switch Breaker Panel (425800-1) is a five-circuit switch and breaker panel designed to consolidate multiple electrical accessories into one clean, ignition-protected control point on a boat's helm or console. The panel houses five illuminating SPST On\/Off rocker switches paired with five thermal resettable breakers, so each circuit is individually protected without the need for separate inline fuses. The breaker set is sized two 3 amp, one 5 amp, one 8 amp, and one 10 amp, with a 10 amp maximum per individual circuit and a 30 amp total panel capacity, giving installers flexibility to match breaker size to the accessory on each switch.\u003c\/p\u003e\u003cp\u003eThe housing is constructed of injection molded nylon for corrosion resistance in a marine environment, and the rocker switches are ignition protected for safe use around gasoline engines. Each switch position is illuminated and backed by a sheet of 20 preprinted, peel-and-stick decal labels that are back lit by green LEDs, letting the installer label every circuit for its specific application (bilge pump, lights, wipers, and so on) after mounting. The panel operates on 12VDC and installs with six fasteners, which are not included. Overall panel dimensions are 6-1\/2 inches by 4-1\/2 inches, with a cutout size of 5-1\/2 inches by 3-1\/2 inches for flush mounting into a helm or dash panel.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 425800-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Switches:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Illuminating, ignition protected SPST On\/Off rocker switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreakers:\u003c\/strong\u003e 5 thermal resettable breakers (two 3 amp, one 5 amp, one 8 amp, one 10 amp)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Individual Circuit Rating:\u003c\/strong\u003e 10 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Total Circuit Rating:\u003c\/strong\u003e 30 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 6-1\/2 inches x 4-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutout Dimensions:\u003c\/strong\u003e 5-1\/2 inches x 3-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Installs with six fasteners, not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Accessories:\u003c\/strong\u003e Sheet of 20 peel-and-stick decal labels, back lit by green LEDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.158 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many switches and breakers does the Sea-Dog 425800-1 panel have?\u003c\/strong\u003e Five illuminating SPST On\/Off rocker switches, each paired with its own thermal resettable breaker, are built into the Sea-Dog 425800-1 Wave Rocker Switch Breaker Panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage rating of each circuit?\u003c\/strong\u003e The five breakers on the 425800-1 panel are sized two at 3 amps, one at 5 amps, one at 8 amps, and one at 10 amps, with a 10 amp maximum on any individual circuit and 30 amps total for the panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this panel run on?\u003c\/strong\u003e The Sea-Dog 425800-1 Wave Rocker Switch Breaker Panel is a 12VDC panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall and cutout dimensions?\u003c\/strong\u003e Overall panel size is 6-1\/2 inches by 4-1\/2 inches, and the mounting cutout is 5-1\/2 inches by 3-1\/2 inches for the 425800-1 panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the panel made of?\u003c\/strong\u003e The 425800-1 panel housing is injection molded nylon, chosen for its resistance to corrosion in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the switches labeled for specific functions out of the box?\u003c\/strong\u003e The switches are blank when the panel ships, but the 425800-1 includes a sheet of 20 preprinted, peel-and-stick decal labels that are back lit by green LEDs so each circuit can be labeled for its intended use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is needed to install the panel?\u003c\/strong\u003e The Sea-Dog 425800-1 installs with six fasteners, which are not included and must be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the rocker switches safe for use near a gasoline engine?\u003c\/strong\u003e Yes, the rocker switches on the 425800-1 panel are ignition protected, making them suitable for use around gasoline marine engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the panel weigh?\u003c\/strong\u003e The Sea-Dog 425800-1 Wave Rocker Switch Breaker Panel weighs 1.158 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan individual switches or decal sheets be replaced later?\u003c\/strong\u003e Sea-Dog offers separate replacement rocker switches and a replacement decal sheet as standalone parts, so a single worn switch or label set can be swapped without replacing the entire 425800-1 panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the breakers reset automatically after tripping?\u003c\/strong\u003e Yes, the breakers on the 425800-1 panel are thermal resettable breakers, so they reset after cooling down once the overload condition is cleared.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many units come in one package?\u003c\/strong\u003e The Sea-Dog 425800-1 Wave Rocker Switch Breaker Panel ships as a standard pack of 1 each.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988812542171,"sku":"S-D-425800-1","price":104.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5085.jpg?v=1784429514"},{"product_id":"blue-sea-systems-4304-weatherdeck-waterproof-4-position-fused-switch-panel-12v-dc-ip67","title":"Blue Sea Systems WeatherDeck 4304 Waterproof Fused Switch Panel, 4-Position, 12 Volt DC, IP67","description":"\u003cp\u003eThe Blue Sea Systems WeatherDeck 4304 is a waterproof, fused 4-position switch panel built for exposed helm and deck installations where standard panels cannot survive. Rated IP67 for protection against dust and temporary submersion, it is designed to hold up in spray, rain, and washdown conditions typical of open boats, center consoles, and flybridges. The panel operates on a 12 volt DC system and provides four independently fused circuits, each rated 2 amps, so individual accessories are protected without requiring a separate fuse block. Each position is controlled by a hinge lever actuator for positive on\/off operation with wet or gloved hands. The panel housing is molded from durable plastic to resist the corrosion and UV exposure common to marine deck hardware, and wiring connections are made via screw terminals for a secure, serviceable installation. With overall dimensions of 4 x 6 x 7 inches, the WeatherDeck 4304 mounts to a deck or console face and is sized to fit typical helm switch panel cutouts. It is a straightforward upgrade for boaters adding accessory circuits such as deck lighting, livewell pumps, washdown pumps, or other 12 volt DC accessories in a location exposed to the elements.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4304\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 4-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 2 Amps per circuit, fused\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw Terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4 x 6 x 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Protection Rating:\u003c\/strong\u003e IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 4304 waterproof?\u003c\/strong\u003e Yes, the WeatherDeck 4304 carries an IP67 protection rating, meaning it is sealed against dust and can withstand temporary submersion, making it suitable for exposed deck and helm mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many circuits does the WeatherDeck 4304 panel have?\u003c\/strong\u003e It provides 4 individually fused positions, each rated 2 amps, wired in a 4-way circuit configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage system is the 4304 panel designed for?\u003c\/strong\u003e The panel operates on a 12 volt DC electrical system, standard for most recreational boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Blue Sea Systems 4304?\u003c\/strong\u003e The WeatherDeck 4304 measures 4 x 6 x 7 inches overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 4304 switch panel weigh?\u003c\/strong\u003e It weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the WeatherDeck 4304 panel made from?\u003c\/strong\u003e The panel housing is made from plastic, chosen for corrosion and UV resistance in marine deck environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are wires connected to the 4304 panel?\u003c\/strong\u003e Wiring connects via screw terminals on the back of each of the 4 positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is each circuit on the 4304 switched on and off?\u003c\/strong\u003e Each of the 4 positions on the WeatherDeck 4304 uses a hinge lever actuator, allowing positive switching even with wet or gloved hands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is each circuit on the 4304 fused for?\u003c\/strong\u003e Each of the 4 circuits on the Blue Sea Systems 4304 panel is fused at 2 amps to protect the connected accessory and wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the WeatherDeck 4304 panel typically installed?\u003c\/strong\u003e Because it is rated IP67, the 4304 is intended for mounting in exposed locations such as open helms, decks, and flybridges where a standard indoor switch panel would not hold up to spray and washdown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 4304 panel come with the fuses installed?\u003c\/strong\u003e Yes, the Blue Sea Systems 4304 is a fused panel, with each of its 4 positions rated for 2 amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does mounting the 4304 work?\u003c\/strong\u003e The WeatherDeck 4304 is a panel-mount design, installed into a deck or console cutout sized to its 4 x 6 x 7 inch footprint.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989496049883,"sku":"BSS-4304","price":88.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4304.jpg?v=1784507441"},{"product_id":"blue-sea-systems-4306-weatherdeck-6-position-fused-waterproof-switch-panel-12v-dc-ip67","title":"Blue Sea Systems WeatherDeck Waterproof Panel 4306, 6-Position Fused 12V DC Panel, IP67","description":"\u003cp\u003eThe Blue Sea Systems WeatherDeck Waterproof Panel, part number 4306, is a 6-position fused 12 volt DC accessory panel built for wet, exposed helm and deck locations where a standard panel would fail. Its IP67-rated waterproof housing keeps water and spray out of the electrical contacts, and the panel uses screw terminal connections for a secure, vibration-resistant wire connection at each of its six circuits. Each position is individually fused for circuit protection, and the current rating for the panel is 2 Amps. The panel body and switch actuators are constructed of plastic, with metal contact materials at the terminals for reliable current-carrying capacity.\u003c\/p\u003e\u003cp\u003eThis panel is intended for mounting on a bulkhead, dash, or accessory panel location where users need to switch and protect up to six separate 12 volt DC circuits, such as lighting, pumps, fans, and other onboard accessories, in an environment subject to rain, spray, or washdown. The panel measures 4 x 6 x 7 inches and weighs 1.15 pounds, with a gray finish.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4306\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 6-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 2 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw Terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Protection Rating:\u003c\/strong\u003e IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 4 x 6 x 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085043063\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Blue Sea Systems 4306?\u003c\/strong\u003e Part number 4306 is a Blue Sea Systems WeatherDeck waterproof panel with 6 fused positions for 12 volt DC circuits, rated IP67 for water resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this panel waterproof?\u003c\/strong\u003e Yes, the 4306 panel carries an IP67 protection rating, making it suitable for wet or exposed mounting locations on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many circuits does the 4306 panel have?\u003c\/strong\u003e Six individually fused positions are provided on this 6-way panel, each rated at 2 Amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is this panel designed for?\u003c\/strong\u003e The Blue Sea Systems 4306 is a 12 volt DC panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 4306 panel?\u003c\/strong\u003e The panel measures 4 x 6 x 7 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 4306 panel weigh?\u003c\/strong\u003e It weighs 1.15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the panel made from?\u003c\/strong\u003e The Blue Sea Systems 4306 panel body is constructed of plastic, with metal contacts at the terminal connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of wire connections does the 4306 use?\u003c\/strong\u003e Screw terminal connectors are used for each of the six circuits on this panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 4306 panel?\u003c\/strong\u003e This panel is finished in gray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 4306 panel mounted?\u003c\/strong\u003e It is a panel-mount design, intended for installation into a bulkhead, dash, or accessory panel cutout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs each circuit on the 4306 individually protected?\u003c\/strong\u003e Yes, each of the six positions on the Blue Sea Systems 4306 is fused for individual circuit protection.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989496606939,"sku":"BSS-4306","price":123.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4306.jpg?v=1784506886"},{"product_id":"blue-sea-systems-4366-water-resistant-accessory-panel-12v-socket-dual-usb-charger-voltmeter-15a-circuit-breaker-black","title":"Blue Sea Systems 4366 Water-Resistant Accessory Panel with 12V Socket, Dual USB Charger and Voltmeter, Black","description":"\u003cp\u003eThe Blue Sea Systems 4366 is a water-resistant accessory panel that combines a 12V socket, a dual USB charger, a mini voltmeter, and an illuminated 15A circuit breaker switch into a single black polycarbonate\/ABS unit. It is built for boats and other marine or mobile 12V DC applications where onboard power access and battery monitoring need to be consolidated in one location rather than wired as separate components.\u003c\/p\u003e\u003cp\u003eThe panel face is UV-stabilized and flame retardant so it resists sun exposure and will not corrode over time. Silicon breaker boots and a gasket seal the unit against water ingress, giving it an IP66 rating, meaning it is protected against powerful water jets. The illuminated Carling Technologies 15A circuit breaker switch lets the operator shut off the panel entirely, which helps prevent parasitic battery draw when the boat is not in use.\u003c\/p\u003e\u003cp\u003eInstallation is simplified because every 4366 panel ships with a pre-wired harness, so the electrical connections are already prepared before mounting. The panel includes the accessory unit itself along with instructions in the box.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4366\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Accessory Panel with USB Socket and Voltmeter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Switch Panels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polycarbonate\/ABS, UV-stabilized and flame retardant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Breaker:\u003c\/strong\u003e Illuminated Carling Technologies 15A switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Ports:\u003c\/strong\u003e 12V socket, dual USB charger, mini voltmeter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e IP66, silicon breaker boots and gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5.2 inches D x 5.12 inches W x 7.87 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085043667\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e Panel, pre-wired harness, instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 4366 accessory panel include?\u003c\/strong\u003e The 4366 panel combines a 12V socket, a dual USB charger, a mini voltmeter, and an illuminated 15A circuit breaker switch in one black polycarbonate\/ABS unit, and ships with a pre-wired harness and instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 4366 panel waterproof?\u003c\/strong\u003e It is water-resistant rather than fully waterproof, rated IP66 so it is protected against powerful water jets, with silicon breaker boots and a gasket sealing the housing against water ingress.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 4366 panel?\u003c\/strong\u003e The panel measures 5.2 inches deep by 5.12 inches wide by 7.87 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 4366 weigh?\u003c\/strong\u003e The 4366 accessory panel weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 4366 accessory panel run on?\u003c\/strong\u003e It is designed for 12V DC electrical systems, which is standard for most boats and marine 12V applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 4366 panel come pre-wired?\u003c\/strong\u003e Yes, a pre-wired harness is included with every 4366 panel to simplify installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size circuit breaker does the 4366 use?\u003c\/strong\u003e It uses an illuminated Carling Technologies 15A circuit breaker switch, which also allows the panel to be shut off to prevent parasitic battery draw.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 4366 panel face made from?\u003c\/strong\u003e The panel face is polycarbonate\/ABS that is UV-stabilized and flame retardant so it resists sun exposure and will not corrode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Blue Sea Systems 4366 panel?\u003c\/strong\u003e The 4366 accessory panel is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 4366 panel have a warranty?\u003c\/strong\u003e The 4366 accessory panel is backed by a lifetime warranty from Blue Sea Systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 4366 panel meant to replace separate switches and sockets?\u003c\/strong\u003e Yes, the 4366 consolidates a 12V socket, dual USB charger, voltmeter, and circuit breaker switch into a single mounted panel instead of installing each component separately.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989498048731,"sku":"BSS-4366","price":117.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4366.jpg?v=1784507452"},{"product_id":"blue-sea-systems-4363-water-resistant-accessory-panel-15a-breaker-12v-socket-2-1a-dual-usb-charger","title":"Blue Sea Systems 4363 Accessory Panel, 15A Circuit Breaker, 12V Socket, 2.1A Dual USB Charger","description":"\u003cp\u003eThe Blue Sea Systems 4363 is a water-resistant accessory panel that combines a 15A illuminated circuit breaker, a 12V socket, and a 2.1A dual USB charger in a single compact housing. It is built for boats and other marine applications where reliable, splash-protected power access is needed at the helm or in a cabin. The panel carries an IP66 rating, meaning it is protected against powerful water jets, making it suitable for exposed or wet locations onboard.\u003c\/p\u003e\u003cp\u003eThe panel face is made of polycarbonate\/ABS that is UV-stabilized and flame retardant so it resists corrosion and sun damage over time. A silicone breaker boot and gasket seal the switch and panel body against water ingress. The 15A circuit breaker uses an illuminated Carling Technologies switch, letting the operator visually confirm power status and shut the panel off to prevent parasitic battery draw when not in use. A pre-wired harness is included with the panel for straightforward installation, and the unit runs on 12V DC.\u003c\/p\u003e\u003cp\u003eThis panel is part of the Blue Sea Systems accessory panel lineup, which shares a common width, height, and depth format across variants with different breaker, socket, USB, and voltmeter combinations, allowing panels to be mixed and matched within the same mounting footprint.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4363\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e 15A Circuit Breaker, 12V Socket, 2.1A Dual USB Charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 4.94 inches (125.4 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2.25 inches (57.2 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 2.53 inches (64.3 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Breaker Rating:\u003c\/strong\u003e 15A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Output:\u003c\/strong\u003e 2.1A Dual USB Charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polycarbonate\/ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Panel, pre-wired harness, instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 4363 panel include?\u003c\/strong\u003e It combines a 15A illuminated circuit breaker, a 12V socket, and a 2.1A dual USB charger in one panel, and comes with a pre-wired harness and instructions included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 4363 panel waterproof?\u003c\/strong\u003e It is IP66 rated, meaning the Blue Sea Systems 4363 panel is protected against powerful water jets, which suits it to exposed helm or cockpit locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 4363 panel run on?\u003c\/strong\u003e The panel operates on 12V DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 4363 accessory panel?\u003c\/strong\u003e The Blue Sea Systems 4363 measures 4.94 inches (125.4 mm) wide, 2.25 inches (57.2 mm) high, and 2.53 inches (64.3 mm) deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 4363 panel weigh?\u003c\/strong\u003e It weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the panel face made from?\u003c\/strong\u003e The panel face on the 4363 is polycarbonate\/ABS that is UV-stabilized and flame retardant, so it resists corrosion and sun exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 4363 panel help prevent battery drain?\u003c\/strong\u003e Yes, the illuminated Carling Technologies 15A circuit breaker switch on the 4363 can be shut off to prevent parasitic draw on the battery when the panel is not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is water kept out of the switch on the 4363 panel?\u003c\/strong\u003e A silicone breaker boot and gasket seal the circuit breaker switch and panel body against water ingress.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a wiring harness included with the 4363?\u003c\/strong\u003e Yes, a pre-wired harness is included with the Blue Sea Systems 4363 panel for easier installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many USB ports does the 4363 panel have?\u003c\/strong\u003e The 4363 has a dual USB charger rated at 2.1A, alongside the 12V socket and 15A circuit breaker.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 4363 CE certified?\u003c\/strong\u003e No, CE certification applies to the related 4364, 4367, and 4369 panels only, not to the 4363.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the circuit breaker rating on the 4363?\u003c\/strong\u003e The 4363 uses a 15A illuminated circuit breaker switch.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989498081499,"sku":"BSS-4363","price":58.28,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4363.jpg?v=1784507046"},{"product_id":"blue-sea-systems-4321-water-resistant-circuit-breaker-switch-panel-4-position-12v-socket-and-dual-usb-charger-gray","title":"Blue Sea Systems 4321 Circuit Breaker Switch Panel, 4 Position with 12V Socket and Dual USB Charger, Gray","description":"\u003cp\u003eThe Blue Sea Systems 4321 is a water-resistant circuit breaker switch panel built for boats that need reliable, protected circuit switching in a single retrofit-friendly footprint. The panel provides 4 illuminated 15A circuit breaker positions, each giving switching, ON indication, and overcurrent protection in one control, plus a built-in 12\/24V 2.1A DC USB charger for powering phones and electronics at the helm. Wiring is simple: a two-wire connection powers the entire panel, with terminals sized for #10 ring terminals that screw directly to the bus bars for a secure, corrosion-resistant connection. Each of the 4 breaker positions uses a 1\/4 inch male quick-connect terminal rated for 12V DC at up to 45A maximum operating amperage, with a ring terminal size of M5 (#10) at the bus bar. The panel surface is built from UV-stabilized, flame-retardant polycarbonate\/ABS that resists corrosion, while silicone breaker boots and a gasket seal out water; mounted with the gasket in place, the panel front carries an IP66 rating, standing up to powerful water jets. A set of 15 square format circuit labels is included and can be swapped out easily, with additional standard or custom labels available separately. The panel mounts with stainless steel #6 x 5\/8 inch screws and uses industry-standard sizing, so it drops into existing panel cutouts for straightforward retrofits. Includes the panel, 15 common labels, mounting screws, and instructions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4321\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Voltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Amperage:\u003c\/strong\u003e 45 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e 1\/4 inch Male Quick Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRing Terminal Size:\u003c\/strong\u003e M5 (#10)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Connection:\u003c\/strong\u003e Two-wire connection, requires #10 ring terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Stainless Steel #6 x 5\/8 inch mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Accessory:\u003c\/strong\u003e 12\/24V 2.1A DC USB Charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Labels:\u003c\/strong\u003e Set of 15 square format labels included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polycarbonate\/ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP66 when mounted with gasket in place\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 8.5 x 5.5 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085043216\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many circuit breaker positions does the Blue Sea Systems 4321 have?\u003c\/strong\u003e The Blue Sea Systems 4321 has 4 circuit breaker positions, each an illuminated 15A breaker that provides switching, ON indication, and overcurrent protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 4321 panel include a USB charger?\u003c\/strong\u003e Yes, the 4321 includes a built-in 12\/24V 2.1A DC USB charger for powering phones and other devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum amperage rating of this panel?\u003c\/strong\u003e The panel is rated for a maximum operating amperage of 45 Amps at 12V DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 4321 waterproof?\u003c\/strong\u003e It is water-resistant rather than fully waterproof: silicone breaker boots and a gasket seal the panel, and when mounted with the gasket in place the panel front carries an IP66 rating, protecting against powerful water jets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size ring terminals does the 4321 use for wiring?\u003c\/strong\u003e The 4321 uses a two-wire connection and requires #10 ring terminals, which screw to the bus bars for a secure connection; the ring terminal size at the bus bar is M5 (#10).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the panel?\u003c\/strong\u003e The Blue Sea Systems 4321 measures 8.5 x 5.5 x 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the panel surface made of?\u003c\/strong\u003e The panel surface is polycarbonate\/ABS that is UV-stabilized and flame retardant, and will not corrode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting hardware comes with the 4321?\u003c\/strong\u003e Stainless steel #6 x 5\/8 inch mounting screws are included with the 4321 panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many circuit labels are included, and can they be replaced?\u003c\/strong\u003e A set of 15 square format circuit labels is included with the 4321, and they are easy to replace; additional standard or custom labels are available separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 4321?\u003c\/strong\u003e The package includes the panel, 15 common square circuit labels, stainless steel #6 x 5\/8 inch mounting screws, and instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 4321 fit an existing panel cutout on my boat?\u003c\/strong\u003e Yes, the Blue Sea Systems 4321 uses industry-standard panel sizing and mounting, allowing it to be retrofitted into an existing panel cutout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 4321 switch panel?\u003c\/strong\u003e The Blue Sea Systems 4321 switch panel has a gray finish.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989498179803,"sku":"BSS-4321","price":94.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4321.jpg?v=1784507448"},{"product_id":"blue-sea-systems-4320-water-resistant-4-position-circuit-breaker-switch-panel-gray-12v-24v-dc-ip66","title":"Blue Sea Systems 4320 Contura Water-Resistant Circuit Breaker Switch Panel, 4 Position, Gray","description":"\u003cp\u003eThe Blue Sea Systems 4320 is a 4-position Contura water-resistant circuit breaker switch panel built to give consolidated control and circuit protection for up to four DC-powered accessories, including bilge pumps, on 12V or 24V DC systems. Each position uses an illuminated 15A circuit breaker that combines switching, ON indication, and overcurrent protection in a single rocker, so the operator can see at a glance which circuits are live and reset a tripped breaker without tools. The panel is rated for a maximum operating amperage of 45A and terminates with 1\/4 inch male quick connect terminals plus an M5 (#10) ring terminal size for the supply connection.\u003c\/p\u003e\u003cp\u003eThe panel surface is molded from polycarbonate\/ABS that is UV-stabilized and flame retardant, and it will not corrode in a marine environment. Silicone breaker boots and a watertight mounting gasket seal each switch against water ingress; with the gasket installed, the panel front carries an IP66 rating, protecting against powerful water jets. The panel ships in a gray finish sized to industry-standard dimensions and mounting centers, so it drops into an existing panel cutout without modification. Installation hardware -- stainless steel #6 x 5\/8 inch mounting screws -- and 15 common square circuit labels are included along with instructions, so the panel is ready to label and wire for its intended circuits out of the box.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4320\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Contura Water-Resistant Circuit Breaker Panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Breaker Rating:\u003c\/strong\u003e 15 Amps (illuminated, per position)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Voltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Amperage:\u003c\/strong\u003e 45 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e 1\/4 inch Male Quick Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRing Terminal Size:\u003c\/strong\u003e M5 (#10)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Stainless steel #6 x 5\/8 inch mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 4.625 inches (117.47 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 5.0 inches (127 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 1.75 inches (44.45 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Centers (Width):\u003c\/strong\u003e 4.125 inches (104.77 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Centers (Height):\u003c\/strong\u003e 4.437 inches (112.69 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polycarbonate\/ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP66 (panel front, when mounted with gasket)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085043209\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Panel, 15 common square labels, stainless steel #6 5\/8 inch mounting screws, instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many circuits does the Blue Sea Systems 4320 control?\u003c\/strong\u003e The 4320 has 4 positions, each with its own illuminated 15A circuit breaker, giving consolidated switching and overcurrent protection for up to four DC accessories such as bilge pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this panel waterproof?\u003c\/strong\u003e Silicone breaker boots and a watertight mounting gasket seal the 4320's switches against water ingress, and with the gasket installed the panel front is rated IP66, protecting against powerful water jets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage systems does the 4320 work with?\u003c\/strong\u003e It is designed for 12V or 24V DC systems, with a nominal rating of 12 Volts DC and a maximum operating amperage of 45A across the panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the mounting dimensions of the 4320 panel?\u003c\/strong\u003e The panel measures 4.625 inches wide by 5.0 inches high by 1.75 inches deep, with mounting centers of 4.125 inches by 4.437 inches, matching industry-standard circuit breaker panel cutouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat terminal type does the 4320 use for wiring?\u003c\/strong\u003e Each circuit breaker terminates in a 1\/4 inch male quick connect terminal, and the panel's supply connection uses an M5 (#10) ring terminal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the panel made of?\u003c\/strong\u003e The Blue Sea Systems 4320 panel surface is polycarbonate\/ABS that is UV-stabilized and flame retardant and will not corrode in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 4320 available in for this listing?\u003c\/strong\u003e This part number, 4320, is finished in gray; a camo-finish version with the same 4-position layout is sold under a different Blue Sea Systems part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included with the 4320 panel?\u003c\/strong\u003e The 4320 ships with the panel itself, 15 common square circuit labels, stainless steel #6 x 5\/8 inch mounting screws, and installation instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 4320 weigh?\u003c\/strong\u003e The Blue Sea Systems 4320 circuit breaker panel weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I retrofit the 4320 into an existing panel cutout?\u003c\/strong\u003e Yes, the 4320 uses industry-standard sizing and mounting centers, so it is designed to be easily retrofitted into an existing panel opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat breaker rating does each position on the 4320 use?\u003c\/strong\u003e Each of the 4 positions on the 4320 uses an illuminated 15A circuit breaker that provides switching, ON indication, and overcurrent protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Blue Sea Systems 4320?\u003c\/strong\u003e The UPC for the 4320 gray 4-position circuit breaker panel is 632085043209.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989498573019,"sku":"BSS-4320","price":55.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4320.jpg?v=1784507038"},{"product_id":"blue-sea-systems-4322-water-resistant-circuit-breaker-switch-panel-6-positions-gray-12v-dc-ip66","title":"Blue Sea Systems 4322 Water-Resistant Circuit Breaker Switch Panel, 6 Position, Gray, 12V\/24V DC","description":"\u003cp\u003eThe Blue Sea Systems 4322 is a 6-position, water-resistant circuit breaker switch panel built to consolidate switching and circuit protection for multiple 12V or 24V DC accessories on a single panel. Each of the six positions uses an illuminated Contura rocker switch with a built-in 15A circuit breaker, giving each circuit its own overcurrent protection along with an ON indicating LED so you can see at a glance which circuits are active. The panel is pre-wired for straightforward installation and includes a watertight mounting gasket; when mounted with the gasket in place, the panel front carries an IP66 rating, protecting against powerful water jets.\u003c\/p\u003e\u003cp\u003eThe panel surface is made from UV-stabilized, flame-retardant Polycarbonate\/ABS that will not corrode, and silicone breaker boots combine with the gasket to seal out water at each switch. Electrical connections are made via 1\/4 inch male quick-connect terminals, with a ring terminal size of M5 (#10), and the panel mounts using the included stainless steel #6 x 5\/8 inch mounting screws. Its industry-standard size and mounting pattern allow it to be retrofitted into existing helm or accessory panel cutouts. Gray in color, the 4322 panel measures 4.625 inches wide by 6.625 inches high by 1.75 inches deep, with a cutout size of 4.125 inches by 6.125 inches, and ships with 15 square labels for identifying each circuit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4322\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Contura Switch Water-Resistant Panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 Volt or 24 Volt DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Amperage:\u003c\/strong\u003e 45 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Breaker Rating:\u003c\/strong\u003e 15 Amp illuminated circuit breaker per position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e 1\/4 inch Male Quick Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRing Terminal Size:\u003c\/strong\u003e M5 (#10)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Stainless steel #6 x 5\/8 inch mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polycarbonate\/ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP66 (panel front, mounted with gasket)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Width:\u003c\/strong\u003e 4.625 inches (117.47 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Height:\u003c\/strong\u003e 6.625 inches (168.27 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Depth:\u003c\/strong\u003e 1.75 inches (44.45 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutout Width:\u003c\/strong\u003e 4.125 inches (104.77 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutout Height:\u003c\/strong\u003e 6.125 inches (155.57 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085043223\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many circuits does the Blue Sea Systems 4322 panel control?\u003c\/strong\u003e The 4322 panel has 6 switch positions, each with its own illuminated Contura rocker switch and dedicated 15 Amp circuit breaker for separate overcurrent protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 4322 panel waterproof?\u003c\/strong\u003e It carries an IP66 rating on the panel front when installed with its watertight mounting gasket in place, meaning it is protected against powerful water jets, and its silicone breaker boots and gasket seal each switch against water ingress.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage systems is this panel compatible with?\u003c\/strong\u003e The 4322 is designed for 12 Volt or 24 Volt DC systems, with a maximum operating amperage of 45 Amps across the panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum load per circuit on the 4322 panel?\u003c\/strong\u003e Each of the 6 positions on the Blue Sea Systems 4322 panel is protected by its own 15 Amp illuminated circuit breaker.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Blue Sea Systems 4322 switch panel made from?\u003c\/strong\u003e The panel surface is Polycarbonate\/ABS that is UV-stabilized, flame retardant, and will not corrode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat terminal type is used for wiring the 4322 panel?\u003c\/strong\u003e Wiring connects via 1\/4 inch male quick-connect terminals, and the ring terminal size is M5 (#10).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting hardware comes with the 4322 panel?\u003c\/strong\u003e Stainless steel #6 x 5\/8 inch mounting screws are included for installing the Blue Sea Systems 4322 panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 4322 panel?\u003c\/strong\u003e The panel measures 4.625 inches wide by 6.625 inches high by 1.75 inches deep (117.47 x 168.27 x 44.45 mm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cutout size is needed to install the 4322 panel?\u003c\/strong\u003e The mounting cutout for the Blue Sea Systems 4322 panel is 4.125 inches by 6.125 inches (104.77 x 155.57 mm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 4322 panel have indicator lights?\u003c\/strong\u003e Yes, ON indicating LEDs are embedded in all 6 switches so you can see which circuits are active at a glance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Blue Sea Systems 4322 panel?\u003c\/strong\u003e It is finished in gray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Blue Sea Systems 4322 panel?\u003c\/strong\u003e The panel ships pre-wired with 15 square labels, stainless steel #6 x 5\/8 inch mounting screws, and installation instructions.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989498999003,"sku":"BSS-4322","price":71.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4322.jpg?v=1784507042"},{"product_id":"blue-sea-systems-8023-traditional-metal-dc-distribution-panel-8-positions-12-24v-dc-100a","title":"Blue Sea Systems 8023 Traditional Metal DC Panel, 8 Position, 6 x 15A Breakers, 12\/24V DC, 100A","description":"\u003cp\u003eThe Blue Sea Systems 8023 Traditional Metal DC Panel is an 8 position DC distribution panel built for organizing and protecting circuits on 12 or 24 volt DC electrical systems. The panel ships equipped with 6 A-Series 15A circuit breakers (7210), leaving 2 open positions available for future circuit additions. Each breaker uses a white toggle switch with an LED indicator, giving an at-a-glance signal of which circuits are energized. The panel is wired to a negative bus, simplifying grounding for each circuit run. With a 100A maximum rating, the panel is sized for typical helm, cabin, and accessory circuit distribution on boats running 12\/24V DC power. The traditional metal styling gives the panel a clean, classic appearance suited to helm stations and electrical panel boards where a straightforward toggle-switch layout is preferred over modern rocker or digital designs. Overall panel dimensions are 5.25 inches (133.35 mm) wide by 7.50 inches (190.50 mm) high, with a mounting depth of 2.50 inches (63.50 mm), so it is important to confirm available panel space before installation. This DC panel is a universal electrical distribution component and is not tied to a specific boat make, model, or engine application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8023\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e DC Distribution Panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Breakers:\u003c\/strong\u003e 6 A-Series 15A breakers (7210)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12\/24V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Amperage:\u003c\/strong\u003e 100A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 5.25 inches (133.35 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 7.50 inches (190.50 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 2.50 inches (63.50 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.95 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBus Type:\u003c\/strong\u003e Negative bus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndicator:\u003c\/strong\u003e LED indicators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085080235\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many circuit positions does the Blue Sea Systems 8023 panel have?\u003c\/strong\u003e The 8023 panel has 8 total positions, with 6 A-Series 15A breakers (7210) installed and 2 open positions available for adding circuits later.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage systems is the 8023 DC panel compatible with?\u003c\/strong\u003e It is rated for 12\/24V DC systems, so it works on either 12 volt or 24 volt boat electrical setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum amperage rating of this panel?\u003c\/strong\u003e 100A is the maximum amperage rating for the Blue Sea Systems 8023 panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 8023 panel?\u003c\/strong\u003e The panel measures 5.25 inches (133.35 mm) wide by 7.50 inches (190.50 mm) high, with a mounting depth of 2.50 inches (63.50 mm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 8023 weigh?\u003c\/strong\u003e The 8023 DC panel weighs 1.95 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Blue Sea Systems 8023 panel made of?\u003c\/strong\u003e The panel body is made of plastic, styled with a traditional metal-look toggle switch design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 8023 panel have indicator lights?\u003c\/strong\u003e Yes, each toggle switch breaker on the 8023 panel includes an LED indicator showing when the circuit is energized.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the negative bus included on this panel?\u003c\/strong\u003e Yes, the Blue Sea Systems 8023 panel includes a wired negative bus for grounding connected circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this panel fit any boat make or model?\u003c\/strong\u003e The 8023 is a universal DC distribution panel not restricted to a specific boat make or model; installation only requires matching the panel footprint and available circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Blue Sea Systems 8023 panel?\u003c\/strong\u003e The 8023 ships as a complete panel with its 6 pre-installed 15A breakers and an instruction manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size breakers come installed on the 8023 panel?\u003c\/strong\u003e The 8023 comes with 6 A-Series 15A breakers (7210) pre-installed across its 8 available positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 8023 different from the Blue Sea 8385 panel?\u003c\/strong\u003e The 8023 measures 5.25 x 7.50 inches with 6 installed A-Series 15A breakers, while the related 8385 Traditional Metal panel uses a 10.50 x 4.50 inch layout with 5 installed A-Series 15A breakers rated 100A per bus; the two are separate part numbers with different footprints.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989515940059,"sku":"BSS-8023","price":246.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8023.jpg?v=1784507666"},{"product_id":"blue-sea-systems-8033-amber-led-indicator-light-12-24v-dc-push-in-panel-mount-for-circuit-breaker-panels","title":"Blue Sea Systems 8033 LED Indicator Light - Amber, 12\/24V DC","description":"\u003cp\u003eThe Blue Sea Systems 8033 is an amber LED indicator light rated for 12V and 24V DC systems, designed to show at a glance when a DC branch circuit is energized. The LED illuminates amber to indicate ON status on 12\/24V DC circuits, giving boat owners and installers immediate visual confirmation of circuit state without needing to check a breaker panel directly. It installs with a simple push-in method that mounts in any thickness of panel material, making it straightforward to add to new panel builds or retrofit into existing setups.\u003c\/p\u003e\u003cp\u003eThis indicator is used as a component within Blue Sea Systems circuit breaker panels, including on the SMS Surface Mount System Panel Enclosures, where multiple 8033 LEDs are installed to provide ON indication across DC branch circuits. Its compact size and low-profile mounting make it suited for panel faces where clear, at-a-glance status reporting matters. The plastic housing and amber LED provide a durable, low-power signal light for marine 12\/24V DC electrical systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8033\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Color:\u003c\/strong\u003e Amber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source Wattage:\u003c\/strong\u003e 2 Watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Voltage ID:\u003c\/strong\u003e 12V and 24V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndication:\u003c\/strong\u003e Amber ON indicating 12\/24V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5 x 3 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Push-in installation, mounts in any thickness material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085080334\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Blue Sea Systems 8033 LED indicator light do?\u003c\/strong\u003e It is an amber LED that illuminates ON to indicate that a 12V or 24V DC branch circuit is energized, giving a quick visual status check at the panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does part number 8033 work with?\u003c\/strong\u003e The 8033 indicator light is rated for both 12V and 24V DC panel systems, with the panel voltage ID marked accordingly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 8033 indicator light?\u003c\/strong\u003e Amber. The LED lights up amber when the associated DC circuit is ON.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Blue Sea Systems 8033 installed?\u003c\/strong\u003e It uses a simple push-in installation that mounts in any thickness of panel material, so no special tools are needed to fit it into a panel face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 8033 indicator light housing made of?\u003c\/strong\u003e The housing is plastic, sized at 5 x 3 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 8033 weigh?\u003c\/strong\u003e The 8033 LED indicator light weighs 0.03 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 8033 used in Blue Sea Systems circuit breaker panels?\u003c\/strong\u003e Yes, the 8033 amber LED is installed in Blue Sea Systems circuit breaker panels, including the SMS Surface Mount System Panel Enclosures, to indicate 12\/24V DC branch circuit status.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the light source wattage of the 8033?\u003c\/strong\u003e The LED indicator draws 2 watts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 8033 indicator be added to an existing panel?\u003c\/strong\u003e Yes, because it push-installs into any thickness of panel material, the 8033 can be added when retrofitting or building out a DC panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 8033 indicator light include mounting hardware?\u003c\/strong\u003e The 8033 is a push-in mount LED indicator; no separate mounting hardware is required for installation.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989516366043,"sku":"BSS-8033","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8033_710a8e1c-d758-4bf4-98f6-f1d50de1bd84.jpg?v=1784507669"},{"product_id":"blue-sea-systems-8027-ac-distribution-panel-120v-ac-30a-main-6-positions-white-toggle-breakers","title":"Blue Sea Systems 8027 Traditional Metal AC Distribution Panel, Main + 6 Positions, 120V AC","description":"\u003cp\u003eThe Blue Sea Systems 8027 is a Traditional Metal AC distribution panel built for onboard 120V AC power management. It combines a 30 Amp main breaker with three 15 Amp branch circuit breakers across a Main + 6 total position layout, giving boat owners three active branch circuits plus room to expand. White toggle actuators operate each breaker, and the panel includes power on and reverse polarity LED indicators so the operator can confirm shore power status and correct polarity at a glance. Internal neutral and ground buses provide proper termination points for AC wiring without additional hardware. This panel does not include a meter, keeping the layout focused on breaker protection and circuit monitoring via the LED indicators.\u003c\/p\u003e\u003cp\u003eConstructed of plastic with a compact 5.25 inch by 7.50 inch footprint and 2.50 inch depth, the 8027 fits standard AC panel cutouts on boats needing a straightforward main-plus-branch AC setup. An insulating back cover (Blue Sea Systems 4027) is available separately for installations that require additional protection behind the panel.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8027\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e AC Distribution Panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Traditional Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Positions:\u003c\/strong\u003e Main + 6 positions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMain Breaker:\u003c\/strong\u003e 30 Amp (A-Series 7238)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBranch Circuit Breakers:\u003c\/strong\u003e 3 Branch, 15 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Voltage:\u003c\/strong\u003e 120V AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Style:\u003c\/strong\u003e White Toggle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulating Back Cover:\u003c\/strong\u003e Sold separately (Blue Sea Systems 4027)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 5.25 inches (133.35 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 7.50 inches (190.50 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 2.50 inches (63.50 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndicators:\u003c\/strong\u003e Power on and reverse polarity LED indicators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBus Configuration:\u003c\/strong\u003e Neutral and ground buses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeter:\u003c\/strong\u003e No meter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085080273\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many circuit positions does the Blue Sea Systems 8027 have?\u003c\/strong\u003e The Blue Sea Systems 8027 has a Main + 6 total position layout, with the main position and three of the branch positions populated by breakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the main breaker rating on the 8027?\u003c\/strong\u003e A 30 Amp main breaker (Blue Sea Systems A-Series 7238) protects the entire panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat branch circuit breakers come installed?\u003c\/strong\u003e Three 15 Amp branch circuit breakers with white toggle actuators are installed on the 8027, leaving the remaining positions open for future circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 8027 include a meter?\u003c\/strong\u003e No, the Blue Sea Systems 8027 does not include a meter; it uses power on and reverse polarity LED indicators instead of a metered display.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the 8027 rated for?\u003c\/strong\u003e 120V AC is the nominal voltage rating for the Blue Sea Systems 8027 panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 8027 panel?\u003c\/strong\u003e The panel measures 5.25 inches (133.35 mm) wide by 7.50 inches (190.50 mm) high, with a depth of 2.50 inches (63.50 mm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 8027 weigh?\u003c\/strong\u003e The Blue Sea Systems 8027 weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 8027 made of?\u003c\/strong\u003e Plastic construction is used for the Blue Sea Systems 8027 AC distribution panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs an insulating back cover available for the 8027?\u003c\/strong\u003e Yes, the Blue Sea Systems 4027 insulating back cover is compatible with the 8027 but is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 8027 have neutral and ground buses?\u003c\/strong\u003e Yes, the Blue Sea Systems 8027 includes neutral and ground buses for terminating AC wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 8027 different from the Blue Sea Systems 1230 panel?\u003c\/strong\u003e Both cover a Main + 6 position AC layout, but the 8027 uses Traditional Metal styling with white toggle breakers while the 1230 is a 360 Panel System with flat rocker actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a 230V version of this panel?\u003c\/strong\u003e Yes, the Blue Sea Systems 8127 shares the same Main + 6 position footprint as the 8027 but is built for 230V AC instead of 120V AC.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989516857563,"sku":"BSS-8027","price":272.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8027.jpg?v=1784507254"},{"product_id":"blue-sea-systems-8214-small-format-label-kit-60-black-waterproof-dc-labels-for-fuse-blocks-and-panels","title":"Blue Sea Systems 8214 Black Label Kit, 60 Waterproof DC Circuit Labels","description":"\u003cp\u003eThe Blue Sea Systems 8214 is a set of 60 black DC circuit labels made from a reinforced, waterproof material built to hold up in a marine electrical environment. Each label is sized to fit the small-format label windows found on ST-Blade Fuse Blocks and Contura Waterproof Fuse Panels, letting installers and boat owners clearly mark every circuit so breakers and fuses can be identified at a glance without guesswork. The waterproof construction resists fading, moisture, and handling wear better than standard paper or vinyl labels, so the text stays legible even in a damp helm or engine space over years of use.\u003c\/p\u003e\u003cp\u003eBecause the kit includes 60 individual labels, it covers a full panel of circuits in one purchase, and the black color provides strong contrast against the light-colored label windows on Blue Sea panels and blocks. Each label measures 0.625 inch by 0.375 inch (15.88 mm), matching the label slot size used on the compatible panels and blocks. This kit is intended purely for circuit identification and does not include any electrical components; it is a labeling accessory meant to pair with an existing ST-Blade Fuse Block or Contura Waterproof Fuse Panel installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8214\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 60 Labels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic, reinforced and waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLabel Dimensions:\u003c\/strong\u003e 0.625 inch x 0.375 inch (15.88 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085082147\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e ST-Blade Fuse Blocks, Contura Waterproof Fuse Panels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many labels are in the Blue Sea Systems 8214 kit?\u003c\/strong\u003e The 8214 kit contains 60 individual black DC circuit labels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the labels in part number 8214?\u003c\/strong\u003e Part number 8214 is the black label kit; the same label set is also available in gray under a different part number for panels where a lighter color is preferred.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the individual labels?\u003c\/strong\u003e Each label in the 8214 kit measures 0.625 inch by 0.375 inch (15.88 mm), sized to fit the small-format label windows on compatible fuse blocks and panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 8214 label kit made of?\u003c\/strong\u003e The labels are made of a reinforced, waterproof plastic material designed to resist fading and moisture in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat products does the Blue Sea Systems 8214 label kit fit?\u003c\/strong\u003e The 8214 label kit is designed for use with ST-Blade Fuse Blocks and Contura Waterproof Fuse Panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these labels waterproof?\u003c\/strong\u003e Yes, the 8214 label set uses a reinforced, waterproof material intended to hold up to moisture and handling on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 8214 label kit weigh?\u003c\/strong\u003e The Blue Sea Systems 8214 label kit weighs 0.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 8214 kit include any circuit breakers or fuses?\u003c\/strong\u003e No, the 8214 is a label kit only, used to identify circuits on an existing ST-Blade Fuse Block or Contura Waterproof Fuse Panel; it does not include breakers, fuses, or wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the 8214 labels if I relabel a panel later?\u003c\/strong\u003e The kit is sold as a one-time set of 60 pre-cut labels sized for Blue Sea panels, so labels are intended to be applied once per circuit position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a gray version of this label kit?\u003c\/strong\u003e Yes, Blue Sea Systems offers the same 60-label set in gray under a separate part number from the black 8214 kit.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989517578459,"sku":"BSS-8214","price":11.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8214.jpg?v=1784507677"},{"product_id":"blue-sea-systems-8171-red-led-indicator-light-12-24v-dc-push-in-panel-pilot-lamp-11-64-hole","title":"Blue Sea Systems 8171 LED Indicator Light, Red, 12\/24V DC","description":"\u003cp\u003eThe Blue Sea Systems 8171 is a red LED indicator light designed for use with Blue Sea Systems circuit breaker panels, giving boat owners a clear, low-power visual signal of circuit status at the helm or panel board. Rated for 12\/24V DC systems, the indicator draws just 15 mA at 12V (19 mW) or 3.2 mA at 24V (77 mW), making it an efficient addition to any DC electrical panel without placing meaningful load on the circuit. It uses simple push-in installation, snapping securely into an 11\/64 inch diameter mounting hole in any panel thickness, so no tools or hardware are required for mounting. Built with a plastic housing and red LED lens, it is intended for use with Blue Sea Systems electrical panels and meets UL1500 and ISO8846 ignition protection requirements, confirming it is safe for installation in gasoline engine spaces aboard a boat. At 0.03 pounds, the indicator adds negligible weight to any panel installation. This is a functional, panel-specific accessory for boat owners who want an at-a-glance indication of whether a given circuit is energized, and it installs in seconds alongside other Blue Sea Systems panel components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8171\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12\/24V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 15 mA @ 12V; 3.2 mA @ 24V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 19 mW @ 12V; 77 mW @ 24V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e Resistor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 11\/64 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Meets UL1500 and ISO8846 requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Blue Sea Systems 8171 indicator light?\u003c\/strong\u003e The Blue Sea Systems 8171 is a red LED indicator light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 8171 indicator light work with?\u003c\/strong\u003e It is rated for 12\/24V DC systems, drawing 15 mA (19 mW) at 12V or 3.2 mA (77 mW) at 24V.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole does the 8171 need?\u003c\/strong\u003e It fits securely in an 11\/64 inch diameter mounting hole in any panel thickness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 8171 LED indicator installed?\u003c\/strong\u003e Installation is a simple push-in fit, so the Blue Sea Systems 8171 mounts into the panel hole without tools or additional hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 8171 indicator light ignition protected?\u003c\/strong\u003e Yes, the 8171 meets UL1500 and ISO8846 ignition protection requirements, making it suitable for use near gasoline engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 8171 indicator light made of?\u003c\/strong\u003e The housing is plastic, with a red LED as the light source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 8171 LED indicator weigh?\u003c\/strong\u003e It weighs 0.03 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the circuit type of the 8171 indicator?\u003c\/strong\u003e The Blue Sea Systems 8171 uses a resistor circuit type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat panels is the 8171 indicator light compatible with?\u003c\/strong\u003e It is designed for use with Blue Sea Systems circuit breaker panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other colors are available besides the red 8171?\u003c\/strong\u003e The same 12\/24V DC LED indicator is also available in amber (part number 8033) and green (part number 8172), alongside the red 8171.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989517938907,"sku":"BSS-8171","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8171.jpg?v=1784507673"},{"product_id":"blue-sea-systems-8172-green-led-indicator-light-12-24v-dc-11-64-push-in-panel-light-for-traditional-metal-circuit-breaker-panels","title":"Blue Sea Systems 8172 Green LED Indicator Light, 12\/24V DC, for Traditional Metal Circuit Breaker Panels","description":"\u003cp\u003eThe Blue Sea Systems 8172 is a green LED indicator light built for marine and RV DC electrical systems, giving an instant visual signal of power status, system activity, or alarm conditions on a switch panel. It operates on both 12V and 24V DC systems, drawing a low nominal current of 15 mA at 12V (19 mW), so it stays visible without placing meaningful load on the battery. The LED uses a resistor circuit and is wired with 26 AWG lead wire for straightforward panel connections.\u003c\/p\u003e\u003cp\u003eInstallation is a simple push-in design that mounts into an 11\/64 inch (4.36 mm) hole and works in panel material of any thickness, so it is not limited to a single panel gauge. The 8172 directly replaces the LEDs used in Blue Sea Systems Traditional Metal circuit breaker panels, making it the correct choice when an indicator light on one of these panels needs to be swapped out or added. Whether used as a general power indicator or wired into an alarm circuit, it delivers dependable, low-maintenance signaling for the life of the panel.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8172\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12\/24 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Current Consumption:\u003c\/strong\u003e 15 mA at 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 19 mW at 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e Resistor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Size:\u003c\/strong\u003e 11\/64 inch (4.36 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 26 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Push-in mount, fits any panel thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.03 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBlue Sea Systems Traditional Metal circuit breaker panels\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Blue Sea Systems 8172 indicator light?\u003c\/strong\u003e The 8172 is a green LED indicator light, part of the Blue Sea Systems lineup that also includes amber and red versions in the same style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 8172 LED run on?\u003c\/strong\u003e It operates on both 12 volt and 24 volt DC systems, making the Blue Sea Systems 8172 suitable for a range of marine and RV electrical setups without needing a different part for each voltage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much current does the 8172 draw?\u003c\/strong\u003e At 12 volts, the 8172 draws a nominal 15 mA and consumes about 19 mW of power, a low enough draw that it will not meaningfully affect battery life even when left on continuously.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole is needed to install the Blue Sea Systems 8172?\u003c\/strong\u003e The 8172 mounts in an 11\/64 inch (4.36 mm) hole using a simple push-in design, and it fits panels of any thickness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 8172 require any tools to install?\u003c\/strong\u003e No, the Blue Sea Systems 8172 uses a push-in installation that snaps into the mounting hole without special tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat panels is the 8172 designed to fit?\u003c\/strong\u003e It is designed to directly replace the LEDs used in Blue Sea Systems Traditional Metal circuit breaker panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire gauge is used on the 8172?\u003c\/strong\u003e The Blue Sea Systems 8172 is wired with 26 AWG leads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of circuit does the 8172 use?\u003c\/strong\u003e It uses a resistor circuit, the same type used across the Blue Sea Systems 8033, 8171, and 8172 indicator LEDs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 8172 be used for alarms as well as power indication?\u003c\/strong\u003e Yes, the 8172 is useful as both a general power indicator and as an alarm light, since it is simply a wired LED that lights when its circuit is energized.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 8172 weigh?\u003c\/strong\u003e The 8172 weighs 0.03 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 8172 a genuine Blue Sea Systems part?\u003c\/strong\u003e Yes, part number 8172 is the manufacturer's own green LED indicator, not a generic substitute, so it matches the fit and finish of the original panel LEDs it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is different between the 8171 and 8172 indicator lights?\u003c\/strong\u003e The 8171 is the red version and the 8172 is the green version; both share the same 12\/24V DC operation, resistor circuit, and 11\/64 inch push-in mounting.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989518921947,"sku":"BSS-8172","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8172.jpg?v=1784507258"},{"product_id":"blue-sea-systems-8260-contura-6-position-switch-mounting-panel-nylon-beige","title":"Blue Sea Systems 8260 6 Position Contura Mounting Panel, Nylon, Beige","description":"\u003cp\u003eThe Blue Sea Systems 8260 is a 6 position Contura mounting panel used to hold a group of six Contura-style rocker switches in a single, organized layout. The panel is molded from nylon for corrosion resistance in a marine environment and finished in beige to match Blue Sea Systems Contura switch hardware. Its modular design allows it to be assembled alongside other Blue Sea Systems mounting panels to build switch groups of varying sizes, and it is one of three fixed position sizes in the lineup alongside 1 position and 3 position panels. The compact panel measures 6.49 inches (164.85 mm) by 2.30 inches (58.42 mm), making it easy to fit into helm and dash layouts where multiple switches are needed in a small footprint. At 0.2 pounds, it adds negligible weight to an installation. This panel provides the mounting cutouts for six Contura switches but does not include the switches or circuit breakers themselves, which are selected and installed separately to match the electrical needs of each circuit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8260\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e 6 Position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Beige\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6.49 inches (164.85 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2.30 inches (58.42 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Compatibility:\u003c\/strong\u003e Contura style switches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many switches does the Blue Sea Systems 8260 mounting panel hold?\u003c\/strong\u003e The 8260 is a 6 position panel, providing mounting cutouts for six Contura style switches in a single row.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 8260 mounting panel made from?\u003c\/strong\u003e It is molded from nylon, chosen for its resistance to corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Blue Sea Systems 8260 panel?\u003c\/strong\u003e The 8260 is finished in beige, matching Blue Sea Systems Contura switch hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 8260 mounting panel?\u003c\/strong\u003e The panel measures 6.49 inches (164.85 mm) long by 2.30 inches (58.42 mm) wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 8260 mounting panel weigh?\u003c\/strong\u003e The Blue Sea Systems 8260 weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 8260 come with switches installed?\u003c\/strong\u003e No, the 8260 is a blank mounting panel with cutouts for six Contura switches; the switches and circuit breakers are purchased and installed separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre other panel sizes available besides the 6 position 8260?\u003c\/strong\u003e Yes, Blue Sea Systems also offers a 1 position panel and a 3 position panel in the same Contura mounting panel line as the 8260.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan multiple mounting panels be combined?\u003c\/strong\u003e Yes, the 8260 has a modular design that permits easy assembly alongside other Blue Sea Systems mounting panels to build switch groups of varying sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of switches fit the 8260 panel?\u003c\/strong\u003e The 8260 is designed to accept Contura style switches, which are Blue Sea Systems' rocker switch format.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 8260 genuine Blue Sea Systems hardware?\u003c\/strong\u003e Yes, the 8260 is a genuine Blue Sea Systems part, identified by manufacturer part number 8260.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989519872219,"sku":"BSS-8260","price":18.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8260.jpg?v=1784507693"},{"product_id":"blue-sea-systems-8266-contura-center-mounting-panel-modular-switch-panel-bracket-5052-aluminum","title":"Blue Sea Systems 8266 Contura Center Mounting Panel, Aluminum","description":"\u003cp\u003eThe Blue Sea Systems 8266 is a Contura center mounting panel, an aluminum bracket used to build custom modular switch panel arrays for Contura-style rocker switches. It occupies the center position within a modular Contura panel assembly, letting installers combine multiple panel sections into a switch panel sized exactly to the number of switches needed rather than being locked into a fixed factory layout. The 8266 is part of a coordinated Contura mounting panel family that also includes an end panel, and 1, 3, and 6 position panels, all sharing the same 2.30 inch height so they align cleanly when joined together.\u003c\/p\u003e\u003cp\u003eConstruction is heavy 1\/8 inch aluminum alloy with a polished finish, giving the panel the rigidity and corrosion resistance expected in a marine electrical environment. Because the modular design permits easy assembly in groups of varying sizes, boat builders and DIY installers can mix center, end, and multi-position panels to create a switch panel of almost any length. The 8266 ships as a single center mounting panel; Contura switches and additional panel sections are ordered separately to complete an array.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8266\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Position:\u003c\/strong\u003e Center\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1.03 inches (26.16 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2.30 inches (58.42 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum, 5052 alloy, 1\/8 inch thick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085082666\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 1 Contura center mounting panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Blue Sea Systems 8266 used for?\u003c\/strong\u003e The 8266 is a center mounting panel used to build a custom modular Contura switch panel, holding a center position between other panel sections in the array.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 8266 mounting panel?\u003c\/strong\u003e It measures 1.03 inches (26.16 mm) wide and 2.30 inches (58.42 mm) high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 8266 weigh?\u003c\/strong\u003e The Blue Sea Systems 8266 weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 8266 panel made from?\u003c\/strong\u003e It is made from heavy 1\/8 inch aluminum, 5052 alloy, with a polished finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 8266 come with switches installed?\u003c\/strong\u003e No, the 8266 is a blank center mounting panel only; Contura switches are ordered separately and installed into the panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 8266 be combined with other Blue Sea Contura panels?\u003c\/strong\u003e Yes, the modular design lets the 8266 center panel join with end panels and 1, 3, or 6 position panels, all sharing the same 2.30 inch height, to build a switch panel of the needed length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 8266 the same as the Blue Sea 8267 end panel?\u003c\/strong\u003e No, the 8266 is the center position panel at 1.03 inches wide, while the 8267 is a separate end mounting panel at 1.19 inches wide; they are different part numbers within the same Contura panel family.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Blue Sea Systems 8266 have?\u003c\/strong\u003e The 8266 center mounting panel has a polished aluminum finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea 8266 genuine or aftermarket?\u003c\/strong\u003e The 8266 is a genuine Blue Sea Systems part, identified by manufacturer part number 8266.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 8266?\u003c\/strong\u003e Ordering the 8266 includes one Contura center mounting panel; no switches or additional panel sections are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 8266 mounting panel corrosion resistant?\u003c\/strong\u003e Yes, the 8266 is built from aluminum alloy, which provides corrosion resistance suitable for marine electrical panel use.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989520101595,"sku":"BSS-8266","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8266.jpg?v=1784507697"},{"product_id":"blue-sea-systems-8267-contura-end-mounting-panel-modular-aluminum-rocker-switch-panel-beige","title":"Blue Sea Systems 8267 Contura End Mounting Panel, 1.19 x 2.30 Inch","description":"\u003cp\u003eThe Blue Sea Systems 8267 is an End Mounting Panel designed for use with Blue Sea Systems' Contura modular switch panel system. It is a blank end-cap panel, not a functional switch, and is used to complete and close out the end of a Contura panel assembly when grouping multiple switch and circuit breaker positions together. The modular design of the Contura system permits easy assembly in groups of varying sizes, and mounting panels are available in 1, 3, and 6 fixed position models in addition to this end panel, so a boat owner can build out a custom panel layout to match the number of switches and breakers needed aboard.\u003c\/p\u003e\u003cp\u003eConstruction is heavy 1\/8 inch aluminum 5052 alloy, giving the panel the rigidity and corrosion resistance expected in a marine electrical environment, and it carries an IP54 ingress protection rating for resistance to dust and splashing water. The panel is finished in beige to match Contura switch panel systems. At 1.19 inches wide and 2.30 inches tall, the 8267 End Mounting Panel is sized specifically to close out one end of a Contura panel group; a matching Center Mounting Panel is used between switch positions within the same assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8267\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e End Mounting Panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1.19 inches (30.23 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2.30 inches (58.42 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum 5052 Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Beige\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085082673\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Switch Series:\u003c\/strong\u003e Contura\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Blue Sea Systems 8267 used for?\u003c\/strong\u003e The 8267 is an End Mounting Panel that closes out one end of a Contura modular switch panel assembly, allowing multiple switch and circuit breaker positions to be grouped together into a single finished panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 8267 a working switch or breaker?\u003c\/strong\u003e No, the 8267 End Mounting Panel is a blank end-cap panel with no switch or breaker function; it is used to complete the end of a Contura panel group.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Blue Sea Systems 8267 panel?\u003c\/strong\u003e It measures 1.19 inches (30.23 mm) wide and 2.30 inches (58.42 mm) tall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 8267 End Mounting Panel made from?\u003c\/strong\u003e It is constructed of heavy 1\/8 inch aluminum 5052 alloy for durability in a marine electrical environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 8267 panel?\u003c\/strong\u003e The Blue Sea Systems 8267 End Mounting Panel is finished in beige.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 8267 panel have a water or dust resistance rating?\u003c\/strong\u003e Yes, the 8267 carries an IP54 ingress protection rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 8267 weigh?\u003c\/strong\u003e The 8267 End Mounting Panel weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 8267 be used with any switch brand?\u003c\/strong\u003e The 8267 is designed specifically for Blue Sea Systems' Contura modular switch panel system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other mounting panel sizes are available for the Contura system?\u003c\/strong\u003e Besides the 8267 End Mounting Panel, Blue Sea Systems offers a Center Mounting Panel as well as 1, 3, and 6 fixed position mounting panels to build out a custom Contura panel layout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need more than one 8267 for a panel assembly?\u003c\/strong\u003e A Contura panel group typically uses one End Mounting Panel (8267) to close out the assembly, with Center Mounting Panels used between the individual switch positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Blue Sea Systems 8267?\u003c\/strong\u003e The UPC for the Blue Sea Systems 8267 End Mounting Panel is 632085082673.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989520724187,"sku":"BSS-8267","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8267.jpg?v=1784507700"},{"product_id":"blue-sea-systems-8278-contura-switch-mounting-panel-plug-beige-blank-filler-for-unused-switch-locations-ip67","title":"Blue Sea Systems 8278 Contura Switch Mounting Panel Plug, Beige","description":"\u003cp\u003eThe Blue Sea Systems 8278 is a Contura Switch Mounting Panel Plug designed to neatly cover and seal an unused switch position on a Contura switch panel. Rather than leaving an open cutout exposed to spray, moisture, and debris, this plug fills the gap with a finished, factory-matched appearance so the panel looks complete even when not every position is populated with an active switch.\u003c\/p\u003e\u003cp\u003eBuilt to the same environmental standard as the Contura switches it accompanies, the plug is rated for vibration, shock, thermoshock, moisture, and salt spray resistance, making it suitable for the demanding marine environment. It carries internal and external gaskets that form a panel seal, and it meets UL 1500 and ISO 8846 external ignition protection requirements along with an IP67 rating, protected against immersion up to 1 meter. The plug is built to operate across a wide temperature range of -40 F (-40 C) to 185 F (85 C), so it holds up in both extreme cold and engine-room heat.\u003c\/p\u003e\u003cp\u003eThe plug snaps into the standard Contura mounting hole cutout of 1.45 inches by 0.83 inches (36.83 mm by 21.08 mm), matching the same footprint used by Contura rocker and Contura II switches. It is finished in beige to blend with matching Contura panel finishes. Use it to blank off spare switch positions on a helm, dash, or accessory panel while keeping the full panel resistant to water intrusion.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8278\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Contura Switch Mounting Panel Plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Beige\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole\/Throw:\u003c\/strong\u003e SPDT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Operating Current:\u003c\/strong\u003e 18 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e -40 F (-40 C) to 185 F (85 C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting:\u003c\/strong\u003e LED rated 100,000 hours half-life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeals:\u003c\/strong\u003e Internal and external gasket panel seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Size:\u003c\/strong\u003e 1.45 inches x 0.83 inches (36.83 mm x 21.08 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulatory Compliance:\u003c\/strong\u003e Meets UL 1500 and ISO 8846 external ignition protection requirements; IP67 rated, protected against immersion up to 1 meter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4 inches x 3 inches x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Contura Switch Mounting Panels using the standard 1.45 inch x 0.83 inch mounting cutout.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers apply to this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Blue Sea Systems 8278 used for?\u003c\/strong\u003e The 8278 is a Contura Switch Mounting Panel Plug that covers and seals an unused switch position on a Contura panel, keeping the panel finished and protected from moisture when a position is not fitted with an active switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 8278 fit any Contura switch panel?\u003c\/strong\u003e Yes, it is designed to fit Contura Switch Mounting Panels using the standard 1.45 inch x 0.83 inch (36.83 mm x 21.08 mm) mounting cutout shared across Contura switch positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 8278 waterproof?\u003c\/strong\u003e It carries an IP67 rating and is protected against immersion up to 1 meter, with internal and external gaskets sealing the panel opening once installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 8278 plug?\u003c\/strong\u003e The Blue Sea Systems 8278 is finished in beige to match compatible Contura panel color schemes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the mounting hole for the 8278?\u003c\/strong\u003e The mounting hole cutout measures 1.45 inches by 0.83 inches (36.83 mm by 21.08 mm), the standard Contura switch position size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can the 8278 withstand?\u003c\/strong\u003e The 8278 is rated for a temperature range of -40 F (-40 C) to 185 F (85 C), suitable for marine helm and engine-room installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 8278 have any electrical rating since it looks like a switch?\u003c\/strong\u003e The 8278 is a blanking plug, not an active switch, though it shares the Contura form factor listed with an 18 mA operating current and SPDT pole\/throw rating consistent with the Contura switch line it is designed to blank off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 8278 meet marine ignition protection standards?\u003c\/strong\u003e Yes, it meets UL 1500 and ISO 8846 external ignition protection requirements, the same standard applied to Blue Sea Contura switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea 8278 weigh?\u003c\/strong\u003e The 8278 Contura Switch Mounting Panel Plug weighs 0.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install the 8278 plug?\u003c\/strong\u003e The 8278 snaps directly into the Contura panel's mounting hole cutout in place of a switch, using its internal and external gaskets to seal the opening against moisture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 8278 resistant to vibration and salt spray?\u003c\/strong\u003e Yes, the Blue Sea Systems 8278 is built to resist vibration, shock, thermoshock, moisture, and salt spray, matching the durability of the Contura switches it accompanies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 8278 include a lockout feature?\u003c\/strong\u003e The Contura Switch Mounting Panel line includes a lockout slide to reduce the risk of accidental switching on active switches; the 8278 plug fills an unused position on the same panel system.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989521117403,"sku":"BSS-8278","price":8.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8278_c2575dc0-5915-4c93-8101-1afbb8ae0e8d.jpg?v=1784507274"},{"product_id":"blue-sea-systems-8373-water-resistant-contura-switch-panel-6-position-vertical-12v-dc-black-ip66","title":"Blue Sea Systems 8373 Contura Switch Panel, 6-Position Vertical, Black, IP66 Waterproof","description":"\u003cp\u003eThe Blue Sea Systems 8373 is a Contura switch panel built for boats that need reliable, waterproof circuit control at the helm or in an open cockpit. The panel holds 6 circuit positions arranged in a vertical layout and is finished in black. Each circuit position uses a push-button Contura switch with a normally open contact type and simple ON-OFF operation, so operators can control lighting, pumps, electronics, and other 12 volt DC accessories with a single press. Every circuit position includes an integrated ON indicating LED, giving an immediate visual confirmation of which circuits are active, which is especially useful at night or when the panel is mounted out of easy reach.\u003c\/p\u003e\u003cp\u003eBecause it is intended for flybridge and open cockpit installations where the panel is exposed to spray and washdown, the front of the panel is rated IP66, meaning it is protected against powerful water jets directed from any angle. The panel body is constructed of plastic for corrosion resistance in the marine environment. The 8373 is rated for 12 volt DC systems with a 45 amp current rating and is designed as a panel-mount unit, dropping into a cutout for a clean, integrated look on the dash or console.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8373\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Switch Panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayout:\u003c\/strong\u003e Vertical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 45 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e ON-OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Push Button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 4.50 inches (114.30 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 7.50 inches (190.50 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 3.25 inches (82.55 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.35 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085083731\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many circuit positions does the Blue Sea Systems 8373 switch panel have?\u003c\/strong\u003e The Blue Sea Systems 8373 Contura switch panel has 6 circuit positions arranged in a vertical layout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 8373 switch panel waterproof?\u003c\/strong\u003e The front of the 8373 panel is rated IP66, which means it is protected against powerful water jets, making it suitable for flybridge and open cockpit applications where spray and washdown are common.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and current is the Blue Sea Systems 8373 panel rated for?\u003c\/strong\u003e The 8373 is rated for 12 volt DC systems with a 45 amp current rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 8373 Contura switch panel?\u003c\/strong\u003e This panel is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 8373 weigh?\u003c\/strong\u003e The 8373 switch panel weighs 1.35 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 8373 switch panel?\u003c\/strong\u003e The 8373 measures 4.50 inches (114.30 mm) wide, 7.50 inches (190.50 mm) tall, and 3.25 inches (82.55 mm) deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the switches on the 8373 panel light up?\u003c\/strong\u003e Yes, ON indicating LEDs are installed in all 6 circuit positions of the 8373, so it is easy to see which circuits are active.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of switch does the 8373 use?\u003c\/strong\u003e Each position on the Blue Sea Systems 8373 uses a push-button Contura switch with a normally open contact and simple ON-OFF operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 8373 switch panel made of?\u003c\/strong\u003e The 8373 panel body is made of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 8373 a horizontal or vertical panel?\u003c\/strong\u003e The 8373 is a vertical panel, with its 6 circuit positions stacked top to bottom rather than side to side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Blue Sea Systems 8373 installed?\u003c\/strong\u003e The 8373 is a panel-mount unit designed to be installed into a cutout in the dash or console, in a flybridge or open cockpit location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is the 8373 switch panel designed for?\u003c\/strong\u003e Blue Sea Systems designed the 8373 for flybridge and open cockpit applications where the panel is exposed to water spray.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989522034907,"sku":"BSS-8373","price":189.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8373.jpg?v=1784507307"},{"product_id":"blue-sea-systems-8374-water-resistant-contura-switch-panel-3-position-vertical-mount-black","title":"Blue Sea Systems 8374 Contura Switch Water-Resistant Panel, 3 Position, Black","description":"\u003cp\u003eThe Blue Sea Systems 8374 is a Contura Switch Water-Resistant Panel built for open-cockpit and flybridge boats where controls are exposed to spray and wash-down. It is designed around Contura switches, the same illuminated switch style used on many production boats, so it complements existing helm controls rather than looking like an aftermarket add-on. The panel front carries an IP66 rating, meaning it is protected against powerful water jets, and a watertight mounting gasket seals the panel to the mounting surface to keep moisture out of the wiring behind it.\u003c\/p\u003e\u003cp\u003eEach switch position has an ON indicating LED built in so you can see at a glance which circuits are active, along with a red reverse polarity indicating LED. The panel is designed for 12V or 24V DC systems, making it suitable across a range of boat electrical setups, and it ships fully pre-wired with the hot, neutral, and safety ground buses already installed. This 3 position panel is finished in black and includes a Small Format Label Set (available as 8217 in gray or 8214 in black) so each switch can be clearly labeled for its circuit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8374\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Contura Switch Water-Resistant Panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Vertical Mount Panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V or 24V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance Rating:\u003c\/strong\u003e IP66 (protected against powerful water jets)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 6 inches D x 3.25 inches W x 3.75 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.75 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085083748\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Label Set:\u003c\/strong\u003e Small Format Label Set 8217 (Gray) or 8214 (Black)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for open-cockpit and flybridge applications using Contura switches to complement existing controls commonly used on many boats. Suitable for 12V or 24V DC electrical systems.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Blue Sea Systems 8374 designed for?\u003c\/strong\u003e The 8374 is a Contura Switch Water-Resistant Panel designed for open-cockpit and flybridge applications, using Contura switches to complement the existing controls commonly found on many boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 8374 panel waterproof?\u003c\/strong\u003e The panel front is IP66 rated, meaning it is protected against powerful water jets, and it uses a watertight mounting gasket to seal against the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many switch positions does the 8374 have?\u003c\/strong\u003e It is a 3 position panel, giving you three individual Contura switch circuits on one panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage systems is the 8374 compatible with?\u003c\/strong\u003e The Blue Sea Systems 8374 is designed for 12V or 24V DC systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 8374 panel?\u003c\/strong\u003e It is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the panel come pre-wired?\u003c\/strong\u003e Yes, the 8374 has all hot, neutral, and safety ground buses installed and fully pre-wired.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 8374 panel?\u003c\/strong\u003e The panel measures 6 inches deep by 3.25 inches wide by 3.75 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 8374 panel weigh?\u003c\/strong\u003e It weighs 0.75 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the panel mounted?\u003c\/strong\u003e The 8374 is a vertical mount panel that uses a watertight mounting gasket at the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 8374 include labels for the switches?\u003c\/strong\u003e Yes, it includes a Small Format Label Set, available as 8217 in gray or 8214 in black, so each switch position can be labeled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know which switch is on?\u003c\/strong\u003e Each switch on the 8374 panel has an ON indicating LED embedded in it, plus a red reverse polarity indicating LED.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Blue Sea Systems 8374?\u003c\/strong\u003e The UPC for the 8374 Contura Switch Water-Resistant Panel is 632085083748.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989523050715,"sku":"BSS-8374","price":196.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8374.jpg?v=1784507311"},{"product_id":"blue-sea-systems-contura-switch-mounting-panels-1-to-3-position","title":"Blue Sea Systems Contura Switch Mounting Panels - 1 to 3 Position","description":"\u003cp\u003eBlue Sea Systems Contura Mounting Panels give boat and RV builders a clean, modular way to house Contura rocker switches in a single integrated housing instead of drilling and finishing individual switch cutouts. Molded from durable injection molded nylon and rated IP54 for splash resistance, these panels snap together with other Contura panels (1, 3, 6 Position, End, and Center panels) so an entire helm or accessory switch bank can be assembled and expanded over time. Choose the 1 Position panel for a single accessory circuit or the 3 Position panel to gang three Contura rocker switches into one compact housing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003eMaterial: Injection molded nylon\u003c\/li\u003e\n\u003cli\u003eColor: Beige\u003c\/li\u003e\n\u003cli\u003eMounting Type: Panel mount, modular assembly\u003c\/li\u003e\n\u003cli\u003eCompatible Devices: Blue Sea Systems Contura rocker switches\u003c\/li\u003e\n\u003cli\u003eCompatible Vehicle Type: Boat, RV\u003c\/li\u003e\n\u003cli\u003eIngress Protection Rating: IP54\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis line is sold by number of switch positions. Pick the 8268 Contura 1 Position panel if you need to add or replace a single switch location, or the 8259 Contura 3 Position panel if you are grouping three switches together in one housing. Both panels use the same modular Contura mounting system, so multiple panels of either size can be combined side by side to build out a larger custom switch panel.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"3 Position","offer_id":49047448846555,"sku":"BSS-8259","price":11.3,"currency_code":"USD","in_stock":false},{"title":"1 Position","offer_id":49047448879323,"sku":"BSS-8268","price":8.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8259_0e989474-288e-40a9-9417-e175f7518825.jpg?v=1785425196"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/8374.jpg?v=1785356456","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-electrical-system-switches-panels-switch-accessory-panels.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}