{"title":"Wiring, Connectors \u0026 Bus Bars","description":null,"products":[{"product_id":"sierra-18-6823-universal-wiring-harness-for-tilt-and-trim-motors-converts-3-wire-to-2-wire-fits-all-brands","title":"Sierra 18-6823 Universal Wiring Harness - Converts 3-Wire Tilt and Trim Motor to 2-Wire","description":"\u003cp\u003eThe Sierra 18-6823 is a universal wiring harness built to convert a 3-wire tilt and trim motor to a 2-wire design. It is used when replacing or rewiring a boat's tilt and trim motor circuit and is designed to work across brands rather than being limited to a single manufacturer's system. The harness uses color-coded wiring in blue, black, red, green, and white to keep circuit identification straightforward during installation, and it terminates in spade connectors or ring terminals so it can be connected directly to standard tilt and trim motor and relay hardware without additional adapters. As a Sierra product, it is manufactured to meet or exceed the quality of the original equipment wiring it replaces, making it a reliable option for boat owners and marine technicians handling tilt and trim electrical repairs or upgrades. Because the 18-6823 is a universal-fit harness rather than a single-application part, it is commonly stocked as a go-to solution for converting older 3-wire tilt and trim motor setups to the more common 2-wire configuration found on many modern systems. It ships as a single wiring harness unit, ready to install in place of a worn, corroded, or incompatible factory harness.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6823\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Wiring Harness for Tilt and Trim Motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Converts 3-Wire Tilt and Trim Motor to 2-Wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Colors:\u003c\/strong\u003e Blue, Black, Red, Green, White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Spade Connector or Ring Terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 11.5 x 10.12 x 1.12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.38 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282310950\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Universal, works with tilt and trim motors across brands\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe Sierra 18-6823 is a universal wiring harness and is not limited to a specific engine or motor model; it is designed to work with 3-wire tilt and trim motors that need to be converted to a 2-wire circuit, across brands.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-6823 wiring harness do?\u003c\/strong\u003e It converts a 3-wire tilt and trim motor circuit to a 2-wire design, allowing the motor to be wired into a 2-wire tilt and trim system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-6823 fit my boat's brand of outboard or sterndrive?\u003c\/strong\u003e Yes, the 18-6823 is a universal wiring harness designed to work with tilt and trim motors across brands rather than one specific manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire colors are included in this harness?\u003c\/strong\u003e The Sierra 18-6823 harness includes blue, black, red, green, and white wires for circuit identification during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of connectors does the 18-6823 use?\u003c\/strong\u003e This harness terminates in spade connectors or ring terminals, allowing it to connect to standard tilt and trim motor and relay hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-6823 weigh?\u003c\/strong\u003e The Sierra 18-6823 wiring harness weighs 0.38 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-6823 harness?\u003c\/strong\u003e The harness measures 11.5 x 10.12 x 1.12 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6823 genuine OEM or aftermarket?\u003c\/strong\u003e The 18-6823 is a Sierra-branded aftermarket harness manufactured to meet or exceed the quality of the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any additional adapters to install this harness?\u003c\/strong\u003e No additional adapters are required; the 18-6823 comes with spade connectors or ring terminals that connect directly to tilt and trim motor wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-6823?\u003c\/strong\u003e Ordering the Sierra 18-6823 includes one complete 3-wire-to-2-wire tilt and trim wiring harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this harness be used on a 2-wire tilt and trim motor without conversion?\u003c\/strong\u003e The 18-6823 is specifically built to convert 3-wire tilt and trim motors to a 2-wire configuration, so its purpose is the conversion itself rather than direct 2-wire replacement.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988359590107,"sku":"SIE-18-6823","price":83.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-6823__92621.1692196651.500.750.jpg?v=1785189201"},{"product_id":"amphenol-female-sockets-for-johnson-evinrude-outboards-sierra-18-99511-20-pack","title":"Sierra Amphenol Female Sockets for Johnson Evinrude Outboard Electrical Connectors, 18-99511, Pack of 20","description":"\u003cp\u003eThe Sierra 18-99511 Amphenol Female Sockets are replacement connector pins designed for the Johnson Evinrude outboard electrical system. Sold in a pack of 20 pieces, these female sockets are used to rebuild or repair Amphenol-style multi-pin connectors found in outboard wiring harnesses, allowing individual pins to be replaced rather than requiring a full harness or connector replacement. This makes them a practical solution for technicians and boat owners performing electrical repairs on Johnson Evinrude outboard wiring where corroded, damaged, or worn socket pins are causing poor connections, intermittent faults, or connector failure.\u003c\/p\u003e\u003cp\u003eEach pack provides enough sockets to service multiple connector repairs or to keep on hand as spares for ongoing outboard electrical maintenance. The female sockets are sized to mate with the corresponding Amphenol male pins used in Johnson Evinrude outboard connector assemblies, restoring a secure, reliable electrical connection within the wiring harness.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99511\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Amphenol Female Sockets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 20 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Johnson Evinrude outboard electrical system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282395032\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Johnson Evinrude outboard electrical wiring harness connectors.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Sierra 18-99511 package?\u003c\/strong\u003e The package contains 20 Amphenol female sockets, sold as individual replacement connector pins rather than a complete connector assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outboard brand are these sockets designed for?\u003c\/strong\u003e These female sockets, part number 18-99511, are designed for use in Johnson Evinrude outboard electrical wiring harness connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use these sockets to repair a single damaged pin instead of replacing the whole connector?\u003c\/strong\u003e Yes, the 18-99511 female sockets allow you to replace individual damaged or corroded pins within an Amphenol-style connector without replacing the entire wiring harness connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many sockets come in one pack?\u003c\/strong\u003e One pack of the Sierra 18-99511 includes 20 female sockets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this product weigh?\u003c\/strong\u003e The Sierra 18-99511 Amphenol Female Sockets weigh 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these male or female connector pins?\u003c\/strong\u003e The 18-99511 part number is for female sockets, which mate with the corresponding male pins in a Johnson Evinrude outboard wiring connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these sockets work with Amphenol-style connectors?\u003c\/strong\u003e Yes, the Sierra 18-99511 sockets are sized and styled to fit Amphenol-style connectors used in Johnson Evinrude outboard electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Sierra 18-99511 Amphenol Female Sockets carry UPC 808282395032.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these genuine Sierra parts?\u003c\/strong\u003e Yes, the 18-99511 is a genuine Sierra part number for Amphenol female connector sockets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of repairs are these sockets used for?\u003c\/strong\u003e These sockets are used for electrical repairs on Johnson Evinrude outboard wiring harnesses, specifically to replace worn or corroded connector pins that cause poor electrical connections.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988445016283,"sku":"SIE-18-99511","price":25.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-973-1656_lg__24259.1558114607.500.750.jpg?v=1785329149"},{"product_id":"johnson-evinrude-amphenol-male-pin-sierra-18-99513-outboard-electrical-connector-terminal","title":"Sierra Amphenol Male Pin for Johnson Evinrude Outboard Electrical Connectors, 18-99513","description":"\u003cp\u003eThe Sierra Amphenol Male Pin, part number 18-99513, is a replacement terminal pin for Johnson Evinrude outboard electrical wiring harness connectors. It is designed for use within the Evinrude outboard electrical system, where Amphenol-style connectors join engine wiring harnesses to control and instrument circuits. This male pin allows a technician or boat owner to repair a damaged or corroded connector pin without replacing the entire wiring harness or connector housing, restoring a secure electrical connection at the terminal.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99513\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Johnson Evinrude Amphenol Male Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Evinrude Outboard Electrical System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Amphenol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Type:\u003c\/strong\u003e Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Engine Brand:\u003c\/strong\u003e Johnson Evinrude\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282395025\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-99513 used for?\u003c\/strong\u003e Sierra part number 18-99513 is a male pin used in the Amphenol-style electrical connectors found in the Johnson Evinrude outboard electrical system, allowing repair of a wiring harness connector at the individual pin level.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a male or female pin?\u003c\/strong\u003e The 18-99513 is a male pin, designed to mate with the corresponding female terminal inside a Johnson Evinrude Amphenol connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich engine brand does the 18-99513 pin fit?\u003c\/strong\u003e This pin is intended for Johnson Evinrude outboard electrical connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connector style does this pin work with?\u003c\/strong\u003e The 18-99513 is made for Amphenol-style connectors, the multi-pin connector type used in Johnson Evinrude outboard wiring harnesses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-99513 pin weigh?\u003c\/strong\u003e The Sierra 18-99513 Amphenol male pin weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-99513?\u003c\/strong\u003e The UPC for the Johnson Evinrude Amphenol Male Pin, Sierra part number 18-99513, is 808282395025.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I replace a single damaged pin instead of the whole connector?\u003c\/strong\u003e Yes, the 18-99513 is sold as an individual male pin so a single damaged or corroded terminal can be replaced without buying a complete connector or harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-99513 sold as a single pin or a kit?\u003c\/strong\u003e It is listed as a single Amphenol male pin, part number 18-99513.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does this part fall under?\u003c\/strong\u003e The 18-99513 is categorized within the Evinrude Outboard Electrical System parts group.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sierra manufacture this part under its own brand?\u003c\/strong\u003e Yes, this Amphenol male pin for Johnson Evinrude connectors is branded and sold under Sierra part number 18-99513.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988445049051,"sku":"SIE-18-99513","price":15.23,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-973-1469_lg__33180.1558114546.500.750.jpg?v=1785329149"},{"product_id":"sierra-18-99518-male-terminal-for-deutsch-connectors-marine-electrical-contact-pin","title":"Sierra Male Deutsch Terminal 18-99518 Marine Electrical Connector Pin","description":"\u003cp\u003eThe Sierra 18-99518 is a male Deutsch-style terminal used to build and repair marine electrical connections. This terminal pin is designed to mate with a corresponding female Deutsch terminal, forming a secure, weather-resistant connection point within a Deutsch connector housing. It is commonly used by installers and technicians when building custom wiring harnesses, repairing damaged connectors, or replacing a terminal pin that has been bent, corroded, or otherwise damaged in an existing Deutsch connector assembly.\u003c\/p\u003e\u003cp\u003eBecause it is sold as an individual terminal rather than a full connector kit, the Sierra 18-99518 lets you replace a single damaged pin instead of discarding an entire wiring harness or connector housing. This keeps repairs targeted and cost-effective for boat owners and marine electricians working on engine wiring, trim and tilt circuits, or other Deutsch-connectorized systems commonly found on marine engines and accessories.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99518\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Style:\u003c\/strong\u003e Deutsch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 736983856630\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-99518 a male or female terminal?\u003c\/strong\u003e The Sierra 18-99518 is a male terminal pin designed to mate with a female Deutsch terminal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connector style does the 18-99518 terminal fit?\u003c\/strong\u003e It is built to the Deutsch connector style, so it is meant to be used inside Deutsch-style connector housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-99518 terminal weigh?\u003c\/strong\u003e This terminal weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I replace just one damaged pin instead of the whole connector?\u003c\/strong\u003e Yes, the Sierra 18-99518 is sold as an individual male terminal, so a single damaged or corroded pin in a Deutsch connector can be replaced without discarding the entire harness or housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-99518 terminal?\u003c\/strong\u003e The UPC for the Sierra 18-99518 male Deutsch terminal is 736983856630.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this terminal genuine Sierra or aftermarket?\u003c\/strong\u003e The 18-99518 is a genuine Sierra part, identified by its Sierra manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this terminal typically used for on a boat?\u003c\/strong\u003e Marine technicians use the Sierra 18-99518 male Deutsch terminal to build or repair wiring harnesses that use Deutsch-style connectors, such as those found on engine and accessory wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-99518 come with a connector housing?\u003c\/strong\u003e No, the Sierra 18-99518 is the terminal pin itself, not a complete connector housing assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-99518 male terminal mate with any Deutsch female terminal?\u003c\/strong\u003e The Sierra 18-99518 is manufactured to the Deutsch terminal style, so it is intended to mate with a corresponding Deutsch female terminal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy an individual terminal instead of a full harness?\u003c\/strong\u003e Buying the Sierra 18-99518 as a single male terminal allows a targeted, lower-cost repair when only one pin in a Deutsch connector has failed.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988445081819,"sku":"SIE-18-99518","price":13.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-913-4679_lg__08755.1632143267.500.750.jpg?v=1785329169"},{"product_id":"sierra-18-99512-marine-bullet-connector-kit-insulated-electrical-wire-connectors-for-boat-wiring-and-ignition-repair","title":"Sierra Bullet Connector Kit 18-99512 - Marine Electrical Wire Connectors","description":"\u003cp\u003eThe Sierra 18-99512 Bullet Connector Kit provides a reliable way to join and disconnect marine electrical wiring. Bullet connectors are a common choice on boats because they allow a wire run to be quickly separated for maintenance, panel removal, or engine servicing, then reconnected without re-terminating the wire each time. This kit is supplied as a single package containing the connector components needed to complete wiring connections in 12-volt marine electrical circuits, such as engine harnesses, accessory wiring, and panel connections.\u003c\/p\u003e\u003cp\u003eBecause marine wiring is exposed to vibration, moisture, and temperature swings, having a dedicated bullet connector on hand means a technician or boat owner can make a clean, separable splice rather than relying on a permanent butt connection in a location that may need future access. The compact package is sized for storage in a toolbox or parts bin aboard the vessel or in a service van.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99512\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bullet Connector Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.0625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 3.5 x 3.5 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282394950\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-99512 Bullet Connector Kit used for?\u003c\/strong\u003e The Sierra 18-99512 is a bullet connector kit used to join and separate marine electrical wiring, letting a circuit be disconnected for service and reconnected without re-terminating the wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many connectors are included with part number 18-99512?\u003c\/strong\u003e The 18-99512 kit ships as a single package with a quantity of one, containing the bullet connector components needed to complete a wiring connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the package weight of the 18-99512 connector kit?\u003c\/strong\u003e This kit weighs 0.0625 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the Sierra 18-99512?\u003c\/strong\u003e The package measures 3.5 x 3.5 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Sierra 18-99512 Bullet Connector Kit manufactured?\u003c\/strong\u003e The country of origin listed for the 18-99512 kit is China.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan bullet connectors like the 18-99512 be used on 12-volt boat wiring circuits?\u003c\/strong\u003e Yes, bullet connectors such as the Sierra 18-99512 are designed for use in 12-volt marine electrical wiring, including engine harness and accessory circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-99512 a genuine Sierra part?\u003c\/strong\u003e Yes, 18-99512 is the Sierra manufacturer part number for this bullet connector kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use a bullet connector instead of a permanent wire splice?\u003c\/strong\u003e A bullet connector, like the one in the Sierra 18-99512 kit, allows the connection to be unplugged and reconnected repeatedly, which is useful anywhere a wire run needs to be disconnected for maintenance rather than cut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-99512 Bullet Connector Kit?\u003c\/strong\u003e The UPC for this product is 808282394950.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-99512 kit include installation tools?\u003c\/strong\u003e The 18-99512 package includes the bullet connector components only, packaged as a quantity of one; no additional tooling is specified for this kit.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988445114587,"sku":"SIE-18-99512","price":15.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-911-9783_lg__56647.1558114839.500.750.jpg?v=1785188770"},{"product_id":"sierra-wh10550-1-female-motor-side-trolling-motor-connector-24v-8-gauge-wire-with-butt-connectors-mates-with-wh10540-1-boat-side-plug","title":"Sierra WH10550-1 Female Motor Side Trolling Motor Socket, 24 Volt, Use with WH10540-1 Male Plug","description":"\u003cp\u003eThe Sierra WH10550-1 is a 24 Volt female, motor-side trolling motor socket designed to complete the wiring connection between a trolling motor and its power plug. It is built to pair with Sierra's WH10540-1 male boat-side trolling motor plug (sold separately), giving anglers and boaters a clean, weatherworthy disconnect point in the trolling motor's power circuit. The socket comes with two 6 inch, 8 gauge wire leads fitted with butt connectors, so it can be spliced directly into existing motor wiring without needing to source separate connectors or wire.\u003c\/p\u003e\u003cp\u003eConstruction features a machined exterior for a precise, durable fit at the connection point, and the socket is rated specifically for 24 Volt trolling motor systems. It is a universal-fit part, meaning it is not tied to a specific motor make, model, or year, and works anywhere a compatible 24 Volt motor-side socket connection is needed. For high-volume installers or rebuilders, Sierra also offers this same socket in a bulk package of 100 under part number WH10552, while WH10550-1 is the standard individually packaged part. As a genuine Sierra part, it is backed by Sierra's warranty coverage.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e WH10550-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Female Motor Side Trolling Motor Socket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 24 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 8 Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 6 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Butt Connectors Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompanion Part:\u003c\/strong\u003e WH10540-1 Male Boat Side Trolling Motor Plug (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Package Option:\u003c\/strong\u003e WH10552 (Package of 100)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.36875 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282360047\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the Sierra WH10550-1 trolling motor socket rated for?\u003c\/strong\u003e The WH10550-1 is rated for 24 Volt trolling motor systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WH10550-1 a male or female connector?\u003c\/strong\u003e It is a female, motor-side trolling motor socket, meaning it connects on the motor side of the wiring circuit rather than the boat side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat part does the WH10550-1 pair with?\u003c\/strong\u003e It is designed to be used with Sierra's WH10540-1 male boat-side trolling motor plug, which is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire comes attached to the WH10550-1 socket?\u003c\/strong\u003e Two 6 inch, 8 gauge wire leads are included, already fitted with butt connectors for splicing into existing motor wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to buy separate butt connectors for this socket?\u003c\/strong\u003e No, butt connectors are already included on the WH10550-1's wire leads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WH10550-1 sold individually or in bulk?\u003c\/strong\u003e WH10550-1 is the standard individually packaged version of this socket; Sierra also offers the same connector in a bulk package of 100 under part number WH10552.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the WH10550-1 socket made of?\u003c\/strong\u003e The connector has a machined exterior construction for a precise fit at the electrical connection point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is the WH10550-1 connector?\u003c\/strong\u003e The socket measures 0.39 x 0.39 x 0.39 inches and weighs 0.36875 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the WH10550-1 fit any trolling motor?\u003c\/strong\u003e Yes, the WH10550-1 is a universal-fit 24 Volt motor-side socket and is not limited to a specific motor make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the WH10550-1?\u003c\/strong\u003e Each WH10550-1 order includes one female motor-side trolling motor socket with its two attached 6 inch, 8 gauge wire leads and butt connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WH10550-1 a genuine Sierra part?\u003c\/strong\u003e Yes, the WH10550-1 is a genuine Sierra part and is backed by Sierra's warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC should I use to order the WH10550-1?\u003c\/strong\u003e The Sierra WH10550-1 trolling motor socket carries UPC 808282360047.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988459630811,"sku":"SIE-WH10550-1","price":21.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sie-wh10550_lg__19045.1558171135.500.750.jpg?v=1785187981"},{"product_id":"sea-dog-426090-1-wire-cover-injection-molded-abs-covers-wire-run-holes-up-to-1-1-4-in-accepts-wire-to-3-16-in","title":"Sea-Dog Wire Cover 426090-1, ABS Decorative Cover for Wire Run Holes","description":"\u003cp\u003eThe Sea-Dog Wire Cover, part number 426090-1, provides a clean, protective, and decorative finish over wire run holes on boats and other marine installations. It is designed to cover holes up to 1-1\/4 inch in diameter and accepts wire up to 3\/16 inch in diameter, making it a practical solution anywhere a wire pass-through needs to be concealed and protected from the elements.\u003c\/p\u003e\u003cp\u003eConstructed of impact resistant injection molded ABS, the cover is built to withstand the rigors of the marine environment while maintaining a neat appearance. It installs quickly with two #10 flat head fasteners (not included), making it a simple add-on during wiring installation or a quick retrofit to dress up an existing wire run hole.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 426090-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Hole Coverage Diameter:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Wire Diameter Accepted:\u003c\/strong\u003e 3\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #10 FH (flat head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.046 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514426503\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Electrical Supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole does the Sea-Dog 426090-1 wire cover fit?\u003c\/strong\u003e It is designed to cover wire run holes up to 1-1\/4 inch in diameter, giving a clean, finished look over the opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size wire can pass through the Sea-Dog Wire Cover?\u003c\/strong\u003e The 426090-1 wire cover accepts wire up to 3\/16 inch in diameter passing through the covered hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog Wire Cover made from?\u003c\/strong\u003e It is constructed of impact resistant injection molded ABS, chosen for durability in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the wire cover installed?\u003c\/strong\u003e The Sea-Dog 426090-1 installs with two #10 flat head fasteners, which are not included with the cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with part number 426090-1?\u003c\/strong\u003e No, fasteners are not included. Two #10 flat head screws are needed to mount the wire cover and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog Wire Cover weigh?\u003c\/strong\u003e The 426090-1 wire cover weighs 0.046 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the purpose of a wire cover like the 426090-1?\u003c\/strong\u003e It provides protection and a decorative finish over wire run holes, concealing the opening and the wire passing through it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog Wire Cover suitable for marine use?\u003c\/strong\u003e Yes, the 426090-1 is made of impact resistant ABS designed for marine electrical installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 426090-1 Wire Cover?\u003c\/strong\u003e The UPC for the Sea-Dog Wire Cover, part number 426090-1, is 035514426503.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 426090-1 wire cover be used for openings larger than 1-1\/4 inch?\u003c\/strong\u003e No, the Sea-Dog Wire Cover is designed specifically for holes up to 1-1\/4 inch in diameter; larger openings are outside its intended coverage.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988812443867,"sku":"S-D-426090-1","price":4.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5088.jpg?v=1784429505"},{"product_id":"sea-dog-426162-1-polarized-2-pin-molded-electrical-connector-3a-12-24vdc-machined-brass-pins","title":"Sea-Dog Polarized Molded Electrical Connector, 2-Pin, 3 Amp, 12\/24V, Part 426162-1","description":"\u003cp\u003eThe Sea-Dog Polarized Molded Electrical Connector (Part No. 426162-1) is a 2-pin plug built for reliable, mistake-proof electrical connections aboard boats and trailers. The body is molded from Bakelite and neoprene, materials chosen for their resistance to moisture and rough marine environments, while the internal pins are machined brass for durable, low-resistance conductivity. The connector is polarized, meaning the two pins are sized differently so the plug can only be joined one way -- this eliminates the risk of reverse polarity when reconnecting wiring, a common source of electrical faults on boats.\u003c\/p\u003e\u003cp\u003eThis connector is rated for 3 amps at 12\/24VDC, suitable for lighting circuits, accessory wiring, and other low-draw 12V or 24V marine electrical runs. It accepts wire up to 14 gauge, with each conductor secured by a brass set screw for a solid mechanical and electrical connection that can be serviced without soldering. At just 0.06 pounds, it is a compact, lightweight addition to any DC wiring harness or repair kit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 426162-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pins:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Machined brass pins, molded Bakelite and neoprene body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Rating:\u003c\/strong\u003e 3 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e 12\/24 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Wire Gauge:\u003c\/strong\u003e 14 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Attachment:\u003c\/strong\u003e Brass set screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Spacing Dimension A:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Spacing Dimension B:\u003c\/strong\u003e 1-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514426237\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many pins does the Sea-Dog 426162-1 connector have?\u003c\/strong\u003e The Sea-Dog 426162-1 is a 2-pin polarized electrical connector, meaning it has two conductors housed in a single molded plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'polarized' mean for this connector?\u003c\/strong\u003e Polarized means the two pins on the Sea-Dog 426162-1 are sized differently, so the plug can only be inserted one correct way, preventing reverse polarity when the connector is disconnected and reconnected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage and voltage is the 426162-1 rated for?\u003c\/strong\u003e This connector is rated for 3 amps at 12\/24VDC, making it suitable for standard low-draw marine 12V or 24V electrical circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire size does this connector accept?\u003c\/strong\u003e The Sea-Dog 426162-1 accepts wire up to 14 gauge, with each conductor secured by a brass set screw.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 426162-1 connector made from?\u003c\/strong\u003e It is constructed of a molded Bakelite and neoprene body with machined brass pins for durable, corrosion-resistant electrical contact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 426162-1 connector weigh?\u003c\/strong\u003e The Sea-Dog 426162-1 weighs 0.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I attach wires to this connector?\u003c\/strong\u003e Wires are attached to the Sea-Dog 426162-1 using brass set screws, allowing for a secure connection without soldering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this connector suitable for outdoor or marine use?\u003c\/strong\u003e Yes, the Bakelite and neoprene body of the Sea-Dog 426162-1 is designed to hold up in marine environments where moisture exposure is common.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 426162-1 include a matching plug or receptacle?\u003c\/strong\u003e The 426162-1 is the connector itself, with polarized machined brass pins designed to mate with its corresponding half in the Sea-Dog polarized connector series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pin spacing on the 426162-1 connector?\u003c\/strong\u003e The 426162-1 measures 1-1\/4 inches by 1-3\/16 inches across its pin dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 426162-1 an OEM Sea-Dog part or an aftermarket copy?\u003c\/strong\u003e The 426162-1 is a genuine Sea-Dog part, identified by the manufacturer part number 426162-1.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988813754587,"sku":"S-D-426162-1","price":8.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5096.jpg?v=1784429536"},{"product_id":"sea-dog-426164-1-4-pin-polarized-molded-electrical-connector-machined-brass-pins-12-24vdc-5a","title":"Sea-Dog Polarized Molded Electrical Connector 426164-1, 4-Pin, 5-Amp 12\/24VDC","description":"\u003cp\u003eThe Sea-Dog 426164-1 is a 4-pin polarized molded electrical connector built for reliable 12\/24VDC power and signal connections aboard boats and trailers. The body is molded from Bakelite and neoprene, materials chosen for their resistance to moisture and rough marine handling, while the internal pins are machined brass for solid, corrosion-resistant conductivity. Each pin is sized differently so the plug can only be connected one way, eliminating the risk of reverse polarity when wiring is reconnected after maintenance or storage.\u003c\/p\u003e\u003cp\u003eThis connector is rated for 5 amps and accepts wire up to 14 gauge, with wire leads secured by brass set screws for a firm mechanical and electrical connection. The 4-pin configuration makes it suited for circuits that need multiple conductors run through a single polarized connection point, such as accessory wiring, lighting circuits, or trailer connections. As a molded connector, it is designed as a durable, weatherproof alternative to bare wire splices or unpolarized terminal blocks.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 426164-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pins:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Rating:\u003c\/strong\u003e 5 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12\/24VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Wire Gauge:\u003c\/strong\u003e 14 gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Attachment:\u003c\/strong\u003e Brass set screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Bakelite, neoprene, and brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.084 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514426251\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many pins does the Sea-Dog 426164-1 connector have?\u003c\/strong\u003e The Sea-Dog 426164-1 is a 4-pin polarized molded electrical connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage and voltage is this connector rated for?\u003c\/strong\u003e The 426164-1 is rated for 5 amps at 12\/24VDC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Sea-Dog 426164-1 be connected backwards?\u003c\/strong\u003e No. Its pins are sized differently from one another, so the plug can only be inserted one way, which prevents reverse polarity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire gauge does the 426164-1 accept?\u003c\/strong\u003e It accepts wire up to 14 gauge, attached to the connector with brass set screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 426164-1 connector made of?\u003c\/strong\u003e It has a molded Bakelite and neoprene body with machined brass polarized pins.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is wire secured inside the 426164-1 connector?\u003c\/strong\u003e Brass set screws hold each wire lead in place inside the connector body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the Sea-Dog 426164-1?\u003c\/strong\u003e The 426164-1 connector weighs 0.084 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 426164-1?\u003c\/strong\u003e The UPC for the Sea-Dog 426164-1 polarized electrical connector is 035514426251.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 426164-1 waterproof?\u003c\/strong\u003e The connector's molded Bakelite and neoprene construction is built for marine environments, though the source specifications do not state a specific waterproof rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is the 426164-1 connector used for?\u003c\/strong\u003e This 4-pin, 5-amp, 12\/24VDC connector is designed for polarized power and accessory wiring connections on boats and trailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 426164-1 come as a matched plug and receptacle set?\u003c\/strong\u003e The specifications provided for the 426164-1 describe the molded connector itself; no separate plug\/receptacle pairing is specified for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 426164-1 connector?\u003c\/strong\u003e The Sea-Dog 426164-1 measures 1-1\/4 inches (dimension A) by 1-3\/16 inches (dimension B).\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988813787355,"sku":"S-D-426164-1","price":12.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5096_ba0a95e7-9f9b-4668-a43c-4b6a6603103b.jpg?v=1784429543"},{"product_id":"sea-dog-426163-1-polarized-molded-3-pin-electrical-connector-brass-pins-12-24v-dc-4a","title":"Sea-Dog Polarized Molded Electrical Connector, 3-Pin, 4 Amp, 12\/24V DC","description":"\u003cp\u003eThe Sea-Dog Polarized Molded Electrical Connector is a 3-pin plug and receptacle connector built for reliable low-voltage marine wiring. The body is molded from Bakelite and neoprene, with machined brass pins that are sized differently from one another so the connector can only be joined one way. This polarized design eliminates the risk of reverse polarity when reconnecting the plug, which protects connected electronics and accessories from miswiring damage.\u003c\/p\u003e\u003cp\u003eRated for 4 amps at 12\/24 VDC, this connector accepts up to 14 gauge wire and terminates with brass set screws, allowing for a secure mechanical connection without soldering. It is intended for onboard low-current circuits where a quick-disconnect, polarized electrical junction is needed. The compact profile keeps installation simple in tight electrical panels or wiring runs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 426163-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Polarized Molded Electrical Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pins:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 4 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12\/24 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Wire Gauge:\u003c\/strong\u003e 14 gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Termination:\u003c\/strong\u003e Brass set screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Molded Bakelite and neoprene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Material:\u003c\/strong\u003e Machined brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.082 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514426244\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many amps is the Sea-Dog 426163-1 connector rated for?\u003c\/strong\u003e The Sea-Dog Polarized Molded Electrical Connector, part number 426163-1, is rated for 4 amps at 12\/24 VDC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire size does this connector accept?\u003c\/strong\u003e It accepts up to 14 gauge wire, with the wire attaching to the connector using brass set screws rather than solder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'polarized' mean on this connector?\u003c\/strong\u003e The two pins on the 426163-1 connector are sized differently from each other, so the plug can only be inserted one way, which prevents reverse polarity when reconnecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the connector body made of?\u003c\/strong\u003e The body of the Sea-Dog 426163-1 connector is molded from Bakelite and neoprene, with machined brass pins.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pins does this connector have?\u003c\/strong\u003e This is a 3-pin connector, sized to handle up to 4 amps at 12\/24 VDC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the overall size of the 426163-1 connector?\u003c\/strong\u003e The connector measures 1-1\/4 inches by 1-3\/16 inches at its main dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this connector weigh?\u003c\/strong\u003e The Sea-Dog Polarized Molded Electrical Connector 426163-1 weighs 0.082 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the wire attached to the connector?\u003c\/strong\u003e Wire attaches to the 426163-1 connector using brass set screws, allowing a secure mechanical connection without soldering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this connector rated for both 12V and 24V systems?\u003c\/strong\u003e Yes, the 426163-1 connector is rated for 12\/24 VDC electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 426163-1 come with a matching plug or receptacle?\u003c\/strong\u003e The 426163-1 is the polarized molded connector itself, constructed as a single molded body with 3 machined brass pins.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988813852891,"sku":"S-D-426163-1","price":11.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5096_c677be35-e3e9-47b7-a2f5-04eec6aa48fa.jpg?v=1784429546"},{"product_id":"sea-dog-426624-1-bakelite-4-position-terminal-block-20-amp-stamped-brass-marine-bus-bar","title":"Sea-Dog 426624-1 Terminal Block, 4 Position Bakelite Marine Terminal Block, 20 Amp","description":"\u003cp\u003eThe Sea-Dog 426624-1 is a 4-position terminal block built for organizing and securing marine electrical connections. Constructed of stamped brass terminals set into a molded Bakelite base, it provides a rugged, heat-resistant platform for joining multiple wire runs at a single, accessible point. Each of the four terminals is rated to handle 20 amps and accepts a #5 RH fastener, making it suitable for consolidating circuits such as lighting, accessories, or bilge and pump wiring into one clean junction rather than running individual splices throughout the boat.\u003c\/p\u003e\u003cp\u003eBakelite construction resists heat buildup at the terminal points and holds up well in the demanding conditions of an onboard electrical panel or junction box. The compact, lightweight design (0.072 pounds) allows it to be mounted in tight spaces behind panels, in console wiring bays, or wherever a centralized connection point is needed. As a genuine Sea-Dog part, it is intended as a direct, drop-in terminal block for marine 12-volt and low-voltage wiring projects, new installs, and panel rewiring.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 426624-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Optional Terminal Block (4 Position)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Terminals:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped brass terminals with molded Bakelite base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Rating:\u003c\/strong\u003e 20 amps per terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #5 RH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.072 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514426206\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does the Sea-Dog 426624-1 terminal block have?\u003c\/strong\u003e The Sea-Dog 426624-1 has 4 terminal positions, allowing four separate wire connections to be consolidated at one junction point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage can this terminal block handle?\u003c\/strong\u003e Each terminal on the 426624-1 is rated for 20 amps, so the block can safely carry standard marine 12-volt accessory and lighting circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 426624-1 terminal block made of?\u003c\/strong\u003e It is built with stamped brass terminals set into a molded Bakelite base, a combination chosen for electrical conductivity and heat resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fastener does the 426624-1 use?\u003c\/strong\u003e The terminals accept a #5 RH fastener for securing ring or spade wire terminals in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 426624-1 weigh?\u003c\/strong\u003e The terminal block weighs 0.072 pounds, keeping it light enough to mount in tight panel or junction box spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 426624-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, the 426624-1 is a genuine Sea-Dog terminal block, not a generic substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this terminal block typically used for?\u003c\/strong\u003e It is used to consolidate multiple marine wire connections, such as lighting or accessory circuits, at a single organized junction instead of splicing wires individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Sea-Dog 426624-1 be mounted in a tight electrical panel space?\u003c\/strong\u003e Its compact 4-position design and low weight of 0.072 pounds make the 426624-1 suitable for mounting behind panels or in confined wiring bays.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 426624-1 include mounting hardware?\u003c\/strong\u003e The terminal block itself uses #5 RH fasteners at each terminal position; check your wiring kit for the corresponding screws if none are included with your order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bakelite base on the 426624-1 heat resistant?\u003c\/strong\u003e Yes, the molded Bakelite base is used specifically for its resistance to heat buildup at the brass terminal connections.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988814049499,"sku":"S-D-426624-1","price":5.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7236.jpg?v=1784429564"},{"product_id":"sea-dog-426722-1-10-terminal-buss-bar-screw-terminal-block-150a-tin-plated-brass-48vdc-marine-busbar","title":"Sea-Dog Buss Bar Screw Terminal Block 426722-1, 10-Terminal #8-32, 150 Amp, Tin Plated Brass\/ABS","description":"\u003cp\u003eThe Sea-Dog Buss Bar Screw-Terminal Block (426722-1) is a 10-position electrical distribution block designed for organizing and distributing power in a marine electrical system. It provides ten #8-32 screw terminals fed from two 1\/4 inch studs, allowing a single main power source to be split into multiple circuits from one central point. The block is rated for 150 amps and a maximum of 48VDC, making it suitable for 12V and 24V boat wiring where multiple accessories or circuits need to be tied into a common power feed.\u003c\/p\u003e\u003cp\u003eConstruction is tin plated brass contacts set in an ABS housing, giving the current-carrying terminals corrosion resistance while the ABS body provides electrical isolation and physical support. The block installs using two #10 RH fasteners (fasteners not included) and is built to standard dimensions of 6 inches by 1-1\/4 inches by 1-3\/8 inches, with a 5-3\/16 inch mounting hole spacing. The 426722 series carries certification to ISO, ABYC, SAE, USCG, and CE low voltage directive standards, confirming it meets recognized marine and low-voltage electrical safety requirements.\u003c\/p\u003e\u003cp\u003eThis buss bar is intended for use in helm stations, panel boards, and other locations where multiple wires need to be consolidated onto a shared positive or negative bus. Each unit ships one per package.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 426722-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Terminals:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Screw Size:\u003c\/strong\u003e #8-32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Rating:\u003c\/strong\u003e 150 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 48VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength (A):\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth (B):\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight (C):\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Spacing (D):\u003c\/strong\u003e 5-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMain Wire Connection Studs:\u003c\/strong\u003e Two 1\/4 inch studs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Fasteners:\u003c\/strong\u003e Two #10 RH fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tin Plated Brass\/ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ISO, ABYC, SAE, USCG, CE Low Voltage Directive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.24 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514427500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does the Sea-Dog 426722-1 buss bar have?\u003c\/strong\u003e The Sea-Dog 426722-1 buss bar has 10 screw terminals, each sized #8-32, fed from two 1\/4 inch main connection studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage rating of this buss bar?\u003c\/strong\u003e The 426722-1 is rated for 150 amps with a maximum voltage of 48VDC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog buss bar made of?\u003c\/strong\u003e It is constructed of tin plated brass contacts set in an ABS housing, combining corrosion-resistant terminals with an electrically isolating body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 426722-1 come with mounting hardware?\u003c\/strong\u003e No, the block installs with two #10 RH fasteners, but the fasteners are not included and must be supplied separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 426722-1 terminal block?\u003c\/strong\u003e The block measures 6 inches by 1-1\/4 inches by 1-3\/8 inches, with a 5-3\/16 inch mounting hole spacing between fastener points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this buss bar certified for marine electrical use?\u003c\/strong\u003e Yes, the Sea-Dog 426722-1 is certified to ISO, ABYC, SAE, USCG, and CE low voltage directive standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 426722-1 buss bar weigh?\u003c\/strong\u003e This Sea-Dog terminal block weighs 0.24 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many main connection studs does the buss bar have?\u003c\/strong\u003e Two 1\/4 inch studs are provided on the 426722-1 for the main power wire connections, with the 10 screw terminals branching off from them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage systems is the 426722-1 suitable for?\u003c\/strong\u003e With a 48VDC maximum rating, the 426722-1 is suitable for standard 12V and 24V marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many buss bars come in a package?\u003c\/strong\u003e The Sea-Dog 426722-1 ships in a standard pack of 1 each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 426722-1 buss bar?\u003c\/strong\u003e The UPC for the Sea-Dog 426722-1 buss bar is 035514427500.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988814147803,"sku":"S-D-426722-1","price":21.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5112.jpg?v=1784429578"},{"product_id":"sea-dog-426828-1-terminal-post-with-buss-plate-5-16-18-stud-48vdc-150a-marine-battery-terminal-abyc-uscg-cover-included","title":"Sea-Dog Terminal Post with Buss Plate, 5\/16-18 Stud, 48VDC 150A, Nylon\/Nickel Plated Brass, 426828-1","description":"\u003cp\u003eThe Sea-Dog Terminal Post with Buss Plate (426828-1) is a heavy-duty electrical distribution post built for marine 12-24V DC systems that need a reliable central connection point for multiple circuits. The post is constructed of injection molded nylon combined with a nickel plated brass and stainless steel terminal, giving it corrosion resistance for wet, salt-air environments while maintaining a strong mechanical connection. The buss plate itself is drilled for 8, #10-32 screws, allowing multiple ring terminals or wire leads to be gathered onto a single post rather than stacking connections on a standard stud.\u003c\/p\u003e\u003cp\u003eThis terminal post is rated for a maximum of 48VDC and 150A, making it suitable for demanding house-bank, engine, or accessory distribution panels where a single post needs to safely carry higher current loads. It mounts using four #10 RH fasteners (fasteners not included) and includes a cover designed to meet ABYC and USCG requirements, helping keep exposed terminals protected from accidental contact and stray metal debris. The mounting stud on this version is threaded 5\/16-18.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 426828-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Terminal Post with Buss Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\/Nickel Plated Brass\/Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Thread:\u003c\/strong\u003e 5\/16-18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #10 RH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuss Plate Screws:\u003c\/strong\u003e 8, #10-32 screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 48VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Current:\u003c\/strong\u003e 150A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions (A x B x C x D x E):\u003c\/strong\u003e 3-3\/4 inches x 1-11\/16 inches x 1-5\/8 inches x 1-5\/16 inches x 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Four #10 RH fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e Includes cover to meet ABYC\/USCG requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.17 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum voltage and current rating for this terminal post?\u003c\/strong\u003e The Sea-Dog Terminal Post with Buss Plate (426828-1) is rated for a maximum of 48VDC and 150A, making it suitable for higher-load DC distribution points on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size is the mounting stud?\u003c\/strong\u003e Part number 426828-1 has a 5\/16-18 threaded stud. A version with a 3\/8-16 stud is also available as a separate part number if you need the larger thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many wires can I connect to the buss plate?\u003c\/strong\u003e The buss plate on the 426828-1 terminal post is drilled for 8, #10-32 screws, so up to 8 ring terminal connections can be gathered onto this single post.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the terminal post made from?\u003c\/strong\u003e This terminal post is constructed of injection molded nylon combined with a nickel plated brass and stainless steel terminal, giving it corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the terminal post come with a protective cover?\u003c\/strong\u003e Yes, the Sea-Dog Terminal Post with Buss Plate includes a cover designed to meet ABYC and USCG requirements for covering exposed electrical terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is needed to install this terminal post?\u003c\/strong\u003e Installation of the 426828-1 terminal post requires four #10 RH fasteners, which are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this terminal post weigh?\u003c\/strong\u003e The Sea-Dog terminal post, part 426828-1, weighs 0.17 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the terminal post?\u003c\/strong\u003e Part 426828-1 measures 3-3\/4 inches by 1-11\/16 inches by 1-5\/8 inches by 1-5\/16 inches by 2-3\/16 inches across its reference dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this terminal post compliant with marine safety standards?\u003c\/strong\u003e Yes, the 426828-1 terminal post includes a cover that meets ABYC\/USCG requirements for terminal protection aboard boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage systems is this terminal post designed for?\u003c\/strong\u003e Rated up to 48VDC, this Sea-Dog terminal post is suited for standard 12V and 24V marine DC electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a version of this part with a different stud thread?\u003c\/strong\u003e Sea-Dog also offers part number 426830-1, which uses the same buss plate design but with a 3\/8-16 threaded stud instead of the 5\/16-18 stud found on 426828-1.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988814213339,"sku":"S-D-426828-1","price":20.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5114.jpg?v=1784429594"},{"product_id":"sea-dog-426880-1-sae-2-wire-polarized-connector-plug-and-socket-set-16-ga-12in-leads-20a-12-24v-marine-electrical-connector","title":"Sea-Dog 426880-1 SAE Polarized 2-Wire Plug and Socket Connector, 20 Amp 12-24V, Black","description":"\u003cp\u003eThe Sea-Dog 426880-1 is an SAE type, two-prong polarized plug and socket connector set built for reliable 12-24 volt DC electrical connections aboard boats, trailers, and other marine or mobile applications. The polarized design assures proper mating of circuits every time, reducing the chance of an accidental reverse-polarity connection that can damage connected equipment. Each connector comes with color coded 16-gauge tinned wire leads measuring 12 inches, fitted with bullet-type contact pins for a secure, low-resistance connection.\u003c\/p\u003e\u003cp\u003eConstructed of injection molded PVC, the 426880-1 connector body is weather resistant and rated vibration and strain resistant, making it suitable for the constant motion and moisture exposure found in marine environments. Sea-Dog recommends applying dielectric grease to the contacts to further protect the circuit from salt spray, debris, and corrosion. The connector set is rated a maximum of 20 amps at 12 volts DC, covering typical 12-24 volt accessory, lighting, and power circuits. This is a compact, general-purpose connector set rather than a part matched to a specific engine or drivetrain, so it fits any 12-24 volt wiring project calling for a quick-disconnect polarized plug and socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 426880-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e SAE Polarized 2-Wire Plug and Socket Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Plug and Socket, Two-Prong\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e 12-24 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Amperage:\u003c\/strong\u003e 20 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Rating:\u003c\/strong\u003e 20 Amps at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 16 Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Lead Length:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Type:\u003c\/strong\u003e Color Coded Tinned Wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Pin Type:\u003c\/strong\u003e Bullet-Type Contact Pins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Gender:\u003c\/strong\u003e Male and Female (Plug and Socket Set)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e Screw Terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded PVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Dimensions:\u003c\/strong\u003e 1-1\/16 inches x 5\/8 inches x 5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5.83 inches L x 3.87 inches W x 0.79 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Pack Quantity:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Met:\u003c\/strong\u003e UL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514426428\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal 12-24 volt DC electrical connector; not limited to a specific make, model, or engine.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 426880-1 connector used for?\u003c\/strong\u003e It is an SAE type, two-prong polarized plug and socket connector set used to make quick-disconnect 12-24 volt DC electrical connections on boats, trailers, and other marine wiring projects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 426880-1 connector polarized?\u003c\/strong\u003e Yes, the plug and socket are polarized so they can only mate one way, which assures the proper connection of circuits and reduces the chance of an accidental reverse-polarity connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gauge wire does this connector come with?\u003c\/strong\u003e The Sea-Dog 426880-1 has 16-gauge, color coded tinned wire leads, each measuring 12 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum amperage and voltage rating?\u003c\/strong\u003e This connector set is rated a maximum of 20 amps at 12 volts DC, and is designed for 12-24 volt circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the connector body made from?\u003c\/strong\u003e The plug and socket housings are constructed of injection molded PVC, which is weather resistant, vibration resistant, and strain resistant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of contact pins does the 426880-1 use?\u003c\/strong\u003e The connector uses bullet-type contact pins made of copper for a secure, low-resistance connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this connector need any additional protection for saltwater use?\u003c\/strong\u003e Sea-Dog recommends applying dielectric grease to the 426880-1 contacts to further protect the circuit from salt spray, debris, and corrosion in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 426880-1 connector?\u003c\/strong\u003e The connector housing is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this part?\u003c\/strong\u003e Ordering Sea-Dog part number 426880-1 gets you one polarized plug and socket connector set with attached 12-inch, 16-gauge wire leads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 426880-1 fit a specific boat make or engine model?\u003c\/strong\u003e No, this is a universal 12-24 volt DC connector set that is not limited to a specific make, model, or engine; it fits any project needing a polarized SAE plug and socket connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the terminal connection type on this connector?\u003c\/strong\u003e The 426880-1 uses a screw terminal connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 426880-1 packaged from the manufacturer?\u003c\/strong\u003e Sea-Dog packages the 426880-1 connector set in a standard case pack quantity of 10 each.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988817457371,"sku":"S-D-426880-1","price":6.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6773.jpg?v=1784429602"},{"product_id":"blue-sea-systems-1002-cableclam-waterproof-cable-feed-through-seal-0-83-in-opening-black","title":"Blue Sea Systems CableClam Cable Feed-Thru, 0.83 Inch Opening, Part Number 1002","description":"\u003cp\u003eThe Blue Sea Systems CableClam, part number 1002, is a waterproof deck fitting designed to route coaxial cable through a bulkhead or deck while sealing out water intrusion. It is built for feeding antenna cable, such as VHF or satellite antenna coax, from an exterior mount down into the vessel's interior without drilling a hole large enough to compromise the deck's watertight integrity. The clamp-style body closes around the cable after it has been run, so the cable does not need a connector removed to pass it through, and the fitting seals around the cable jacket once tightened.\u003c\/p\u003e\u003cp\u003eThe CableClam features a ring made from UV-stabilized thermoplastic for long-term exposure to sun and weather, paired with a UV-stabilized Buna-N rubber seal that grips the cable and blocks moisture. The housing is finished in black nylon. This is the base 1002 configuration with a 0.83 inch opening sized for standard antenna coax; a separate part number, 1002100, is the same fitting supplied with an added 316 stainless steel dress cap for buyers who want the mounting hardware concealed to match other deck hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening Diameter:\u003c\/strong\u003e 0.83 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Nema Type B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e Coaxial\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRing Material:\u003c\/strong\u003e UV-Stabilized Thermoplastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal Material:\u003c\/strong\u003e UV-Stabilized Buna-N Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Material:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085010027\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size cable opening does the Blue Sea Systems CableClam 1002 have?\u003c\/strong\u003e The CableClam part number 1002 has a 0.83 inch opening, sized to pass standard antenna coaxial cable through a deck or bulkhead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a CableClam used for?\u003c\/strong\u003e It is a waterproof feed-thru fitting that lets you route a cable, such as VHF or satellite antenna coax, through a boat's deck or bulkhead while sealing out water at the entry point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cable need a connector removed to install the CableClam?\u003c\/strong\u003e No. The CableClam 1002 is a clamp-style fitting that closes around the cable after it has already been run, so the cable and its connector do not need to be disassembled during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems CableClam waterproof?\u003c\/strong\u003e Yes, the CableClam 1002 is a waterproof fitting, using a UV-stabilized Buna-N rubber seal that grips the cable jacket to keep water out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials is the CableClam 1002 made from?\u003c\/strong\u003e The ring is UV-stabilized thermoplastic, the seal is UV-stabilized Buna-N rubber, and the outer housing is black nylon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Blue Sea Systems CableClam 1002?\u003c\/strong\u003e The CableClam 1002 is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CableClam 1002 weigh?\u003c\/strong\u003e The Blue Sea Systems CableClam, part number 1002, weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the CableClam 1002 and 1002100?\u003c\/strong\u003e Part number 1002 is the standard CableClam fitting, while part number 1002100 is the same fitting supplied with an added 316 stainless steel dress cap that conceals the mounting hardware and matches other deck hardware; they are separate SKUs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of cable is the CableClam 1002 compatible with?\u003c\/strong\u003e It is designed for coaxial cable, such as the coax used for VHF and satellite antenna runs, connecting through a Nema Type B fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Blue Sea Systems CableClam 1002?\u003c\/strong\u003e The UPC for the CableClam 1002 is 632085010027.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989474357467,"sku":"BSS-1002","price":27.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/1002.jpg?v=1784507315"},{"product_id":"blue-sea-systems-2002-powerpost-high-amperage-cable-connector-5-16-x-7-8-stud-marine-battery-terminal-post","title":"Blue Sea Systems PowerPost Cable Connector, 5\/16 Inch Stud, Model 2002","description":"\u003cp\u003eThe Blue Sea Systems PowerPost Cable Connector, model 2002, is a high amperage stud-style connector built for securely terminating large cables in marine and heavy-duty 12\/24 volt electrical systems. It uses a 5\/16 inch stud measuring 5\/16 inch by 7\/8 inch, paired with a female-to-female connector gender configuration, so it seats onto a matching stud post to create a solid, low-resistance electrical joint for battery banks, bus bars, and high-current distribution points.\u003c\/p\u003e\u003cp\u003eConstruction pairs a stainless steel contact with PBT UL94 V0 insulation, a flame-retardant plastic that helps guard against accidental shorts and holds up to the heat and vibration typical of an engine room or battery compartment. The connector carries a temperature rating of 221 degrees Celsius and a maximum voltage rating of 48 volts, giving it headroom for demanding high-amperage circuits. The housing is black and measures 1 inch long by 1 inch wide by 2.4 inches high, and the connector weighs 0.24 pounds.\u003c\/p\u003e\u003cp\u003eThis connector is compatible with Blue Sea Systems Dual Entry PowerPost Cable Insulators for additional short-circuit protection where dual cable entries are needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Stud\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Dimensions:\u003c\/strong\u003e 5\/16 inch x 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Gender:\u003c\/strong\u003e Female-to-Female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation Material:\u003c\/strong\u003e PBT UL94 V0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 48 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Rating:\u003c\/strong\u003e 221 degrees Celsius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1 inch L x 1 inch W x 2.4 inch H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.24 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085020026\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the stud size on the Blue Sea Systems 2002 PowerPost connector?\u003c\/strong\u003e The stud measures 5\/16 inch, with overall stud dimensions of 5\/16 inch by 7\/8 inch on model 2002.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the 2002 PowerPost connector rated for?\u003c\/strong\u003e Model 2002 is rated for a maximum of 48 volts, suitable for typical 12 and 24 volt marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the connector gender configuration?\u003c\/strong\u003e The Blue Sea Systems 2002 is a female-to-female stud connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is used for the insulation?\u003c\/strong\u003e The insulating housing is made of PBT UL94 V0, a flame-retardant plastic that helps protect against accidental short circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the stud contact stainless steel or plated brass?\u003c\/strong\u003e The contact on the 2002 connector is stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea 2002 connector weigh?\u003c\/strong\u003e It weighs 0.24 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the outer dimensions of the connector housing?\u003c\/strong\u003e The housing measures 1 inch long by 1 inch wide by 2.4 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature can the 2002 PowerPost connector withstand?\u003c\/strong\u003e It carries a temperature rating of 221 degrees Celsius.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Blue Sea Systems 2002 connector?\u003c\/strong\u003e It is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Dual Entry PowerPost Cable Insulators be used with this connector?\u003c\/strong\u003e Yes, the Blue Sea Systems 2002 is compatible with Dual Entry PowerPost Cable Insulators for added protection against accidental short circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cable size does the 2002 PowerPost connector accept?\u003c\/strong\u003e It is designed for high amperage cable connections using a 5\/16 inch stud terminal, as used across the Blue Sea PowerPost line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Blue Sea Systems 2002 connector?\u003c\/strong\u003e The UPC for model 2002 is 632085020026.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989476585691,"sku":"BSS-2002","price":16.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2002.jpg?v=1784506962"},{"product_id":"blue-sea-systems-2011-powerpost-plus-cable-connector-1-4-x-3-4-stud-high-amperage-wire-junction","title":"Blue Sea Systems PowerPost Plus Cable Connector 2011, 1\/4 Inch Flange Stud, 48 Volt Marine Terminal","description":"\u003cp\u003eThe Blue Sea Systems PowerPost Plus Cable Connector, part number 2011, is a flange-style terminal built for high amperage cable connections aboard boats and marine electrical systems. It enables connection of multiple smaller wires in spaces where a traditional bus bar may not fit, making it a compact alternative for consolidating wiring at a single high-current point.\u003c\/p\u003e\u003cp\u003eThe connector uses a 1\/4 inch diameter flange stud that is 3\/4 inch long, with a male connector gender and flange terminal configuration. Its housing is molded from PBT UL94 V0 material for flame-retardant durability, while the contact itself is stainless steel for corrosion resistance in a marine environment. The stud and terminal assembly is insulated with polyvinyl chloride (PVC) to help prevent accidental shorts. The connector is rated for a maximum of 48 volts and meets UL specification standards.\u003c\/p\u003e\u003cp\u003eOverall connector dimensions are 1.38 inches long by 1.38 inches wide by 1.8 inches high, and the unit weighs 0.05 pounds. This makes the Blue Sea Systems 2011 PowerPost Plus Cable Connector well suited for DC electrical panels, battery terminals, and other high amperage junctions where multiple smaller-gauge wires need to be joined into one connection point.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2011\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e PowerPost Plus Cable Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Dimensions:\u003c\/strong\u003e 1\/4 inch x 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 1\/4 inch diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Gender:\u003c\/strong\u003e Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal:\u003c\/strong\u003e Flange Terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e PBT UL94 V0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation Material:\u003c\/strong\u003e Polyvinyl Chloride (PVC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 48 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification Met:\u003c\/strong\u003e UL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1.38 inches L x 1.38 inches W x 1.8 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Blue Sea Systems 2011 PowerPost Plus Cable Connector used for?\u003c\/strong\u003e It is a flange-style cable connector that enables connection of multiple smaller wires in spaces where a traditional bus bar may not fit, making it useful for high amperage cable connections on a boat's electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat stud size does part number 2011 use?\u003c\/strong\u003e The Blue Sea Systems 2011 connector uses a 1\/4 inch diameter flange stud that is 3\/4 inch long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum voltage rating for this connector?\u003c\/strong\u003e The 2011 PowerPost Plus Cable Connector is rated for a maximum of 48 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the housing made of?\u003c\/strong\u003e The housing on the Blue Sea Systems 2011 connector is molded from PBT UL94 V0, a flame-retardant plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the contact on this connector corrosion resistant?\u003c\/strong\u003e Yes, the contact on part number 2011 is stainless steel, which resists corrosion in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat insulation does the 2011 connector use?\u003c\/strong\u003e Polyvinyl chloride (PVC) insulation is used on the stud and terminal of the Blue Sea Systems 2011 Cable Connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this connector UL listed?\u003c\/strong\u003e The Blue Sea Systems PowerPost Plus Cable Connector 2011 meets UL specification standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the connector weigh?\u003c\/strong\u003e Part number 2011 weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the connector?\u003c\/strong\u003e The 2011 PowerPost Plus Cable Connector measures 1.38 inches long by 1.38 inches wide by 1.8 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the connector male or female?\u003c\/strong\u003e The Blue Sea Systems 2011 is a male flange terminal connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I use a PowerPost Plus connector instead of a bus bar?\u003c\/strong\u003e The 2011 PowerPost Plus Cable Connector enables connection of multiple smaller wires in spaces where a traditional bus bar may not fit, offering a more compact solution for consolidating wiring.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989476913371,"sku":"BSS-2011","price":10.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2011.jpg?v=1784507341"},{"product_id":"blue-sea-systems-2003-powerpost-high-amperage-cable-connector-3-8-stud-48v-dc","title":"Blue Sea Systems 2003 PowerPost High Amperage Cable Connector, 3\/8 Inch Stud, 48 Volt DC","description":"\u003cp\u003eThe Blue Sea Systems 2003 PowerPost is a high-amperage cable connector built for marine, RV, and industrial DC electrical systems. It uses a 3\/8 inch stud to provide a secure, reliable termination point for large-gauge cable, making it well suited to battery banks, inverters, and main power distribution connections where multiple cables need to land on a single post.\u003c\/p\u003e\u003cp\u003eThe connector's one-piece serrated flange nut ensures a correct and secure connection every time it is tightened, resisting loosening from vibration. Rather than carrying a fixed amperage rating of its own, the PowerPost is designed so that connections can be stacked directly on the post, with the continuous amperage rating determined by the wire gauge and terminals actually used in the connection. The base is molded from glass-reinforced nylon for durability in a marine environment, and the connector is CE certified. It is rated to a maximum of 48 Volts DC, and the 2003 model uses 1\/4 inch screws.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e PowerPost High Amperage Cable Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 48 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Rating:\u003c\/strong\u003e Not individually rated; continuous rating determined by the wire and terminals used\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Material:\u003c\/strong\u003e Glass-Reinforced Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e CE Certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e One-piece serrated flange nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox Dimensions:\u003c\/strong\u003e 3 inches H x 6 inches W x 7 inches L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.27 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat stud size does the Blue Sea Systems 2003 PowerPost use?\u003c\/strong\u003e The Blue Sea Systems 2003 PowerPost uses a 3\/8 inch stud for terminating high-amperage cable connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum voltage rating for the 2003 PowerPost connector?\u003c\/strong\u003e It is rated to a maximum of 48 Volts DC, making it suitable for marine and RV DC electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size screws does the 2003 PowerPost use?\u003c\/strong\u003e The 2003 model uses 1\/4 inch screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 2003 PowerPost individually amperage rated?\u003c\/strong\u003e No, the Blue Sea Systems 2003 is not rated on its own; connections are stacked on the post, and the continuous amperage rating is determined by the wire and terminals used in the connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 2003 PowerPost connector made from?\u003c\/strong\u003e Its base is molded from glass-reinforced nylon for durability in marine and industrial environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Blue Sea 2003 PowerPost?\u003c\/strong\u003e The Blue Sea Systems 2003 PowerPost is red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 2003 PowerPost CE certified?\u003c\/strong\u003e Yes, the Blue Sea Systems 2003 connector is CE certified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 2003 PowerPost weigh and what are its box dimensions?\u003c\/strong\u003e The Blue Sea Systems 2003 weighs 0.27 pounds and ships in a box measuring 3 inches H x 6 inches W x 7 inches L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the PowerPost 2003 connector used for?\u003c\/strong\u003e It is a high-amperage cable connector used for battery banks, inverters, and main power distribution connections in marine, RV, and industrial DC electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan multiple cables be connected to the 2003 PowerPost at once?\u003c\/strong\u003e Yes, the PowerPost design allows connections to be stacked on the post, with the amperage capacity determined by the wire and terminals used rather than a single fixed rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 2003 PowerPost include mounting hardware?\u003c\/strong\u003e Yes, it includes a one-piece serrated flange nut that ensures a correct and secure connection.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989477175515,"sku":"BSS-2003","price":16.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2003.jpg?v=1784506966"},{"product_id":"blue-sea-systems-2103-powerpost-plus-cable-connector-3-8-16-x-3-4-stud-150a-marine-battery-terminal-for-extending-outboard-harnesses","title":"Blue Sea Systems 2103 Dual PowerPost Cable Connector, 3\/8-16 x 3\/4 Inch Stud, 150 Amp","description":"\u003cp\u003eThe Blue Sea Systems 2103 is a dual PowerPost cable connector built to give installers a secure termination point for extending the length of outboard harnesses or other conductors. It is designed for connecting high amperage conductors, making it a practical solution when a run of heavy-gauge cable needs to be lengthened or when several smaller wires need to tie into a single high-amperage connection point.\u003c\/p\u003e\u003cp\u003eThe connector uses a 3\/8-16 x 3\/4 inch stud to accept the main high-amperage cable, paired with 8 x #8-32 screws that allow smaller wire connections to be made directly at the same post without disturbing the primary cable run. One-piece serrated flange nuts are used throughout to ensure the connections stay correct and secure over time, even in a vibration-prone marine environment. The connector is rated for 150 amperes DC with a maximum voltage of 48 volts DC, and it uses a screw terminal design with copper contacts and nylon insulation for reliable, corrosion-resistant electrical connections.\u003c\/p\u003e\u003cp\u003eThe Blue Sea Systems 2103 weighs 0.34 pounds and is identified by UPC 632085021030.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2103\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Dual PowerPost Cable Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 3\/8-16 x 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Size:\u003c\/strong\u003e 8 x #8-32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 150 Amperes (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 48 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation Material:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e Screw Terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085021030\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.34 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Blue Sea Systems 2103 used for?\u003c\/strong\u003e The 2103 provides a termination point for extending the length of outboard harnesses or other conductors, and it is designed for connecting high amperage conductors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat stud size does the 2103 PowerPost connector use?\u003c\/strong\u003e It uses a 3\/8-16 x 3\/4 inch stud for the main high-amperage cable connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan smaller wires be connected to the same post as the main cable?\u003c\/strong\u003e Yes, the dual design of the Blue Sea Systems 2103 includes 8 x #8-32 screws that allow smaller wire connections to be made at the same post as the main 3\/8-16 stud.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much amperage can the 2103 connector handle?\u003c\/strong\u003e The Blue Sea Systems 2103 is rated for 150 amperes DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum voltage rating of the 2103?\u003c\/strong\u003e 48 volts DC is the maximum voltage rating for this PowerPost connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials are used in the 2103 PowerPost connector?\u003c\/strong\u003e The connector uses copper contacts with nylon insulation and a screw terminal design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the wire connections secured on the 2103?\u003c\/strong\u003e One-piece serrated flange nuts are used to ensure correct and secure connections on the Blue Sea Systems 2103.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 2103 weigh?\u003c\/strong\u003e This connector weighs 0.34 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 2103 a single or dual connector?\u003c\/strong\u003e It is a dual PowerPost cable connector, part of Blue Sea Systems' dual PowerPost connector lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Blue Sea Systems 2103?\u003c\/strong\u003e The UPC for the 2103 PowerPost connector is 632085021030.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 2103 suitable for outboard engine wiring?\u003c\/strong\u003e Yes, the Blue Sea Systems 2103 is designed for extending the length of outboard harnesses or other conductors when a heavy-gauge run needs to be lengthened.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989479141595,"sku":"BSS-2103","price":30.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2103.jpg?v=1784506969"},{"product_id":"blue-sea-systems-2105-maxibus-250a-busbar-12-screw-terminals-2-studs-no-cover","title":"Blue Sea Systems 2105 250 Amp MaxiBus Common BusBar, 12 x #10-24 Terminal Screws, No Cover","description":"\u003cp\u003eThe Blue Sea Systems 2105 is a 250 amp MaxiBus common BusBar designed to distribute AC or DC power across multiple circuits from a single, high-capacity connection point. It is built with a tin-plated pure electrical copper conductor for maximum conductivity and corrosion resistance, mounted on a UL 94-V0 rated base material that resists high heat. The BusBar is rated for a continuous load of 250A AC\/DC with a maximum voltage of 300V AC \/ 48V DC, making it suitable for demanding marine electrical panels and distribution systems.\u003c\/p\u003e\u003cp\u003eThe 2105 provides 12 x #10-24 terminal screws for connecting individual circuit wires, plus 2 x 5\/16\"-18 terminal studs for the main power feed connections, giving it 12 circuits of distribution capacity from one BusBar. Two mounting holes accept #10 (M5) screws for secure panel installation. This BusBar is sold without a cover, so an optional cover should be sourced separately if circuit protection or accidental-contact shielding is required. It is part of Blue Sea Systems' MaxiBus common BusBar lineup used to simplify wiring, reduce voltage drop, and organize multiple circuits in boat electrical systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2105\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e MaxiBus Common BusBar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 250 Amps AC\/DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 300V AC \/ 48V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Screws:\u003c\/strong\u003e 12 x #10-24\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Studs:\u003c\/strong\u003e 2 x 5\/16\"-18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Circuits:\u003c\/strong\u003e 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Holes:\u003c\/strong\u003e 2 holes, accept #10 (M5) screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Material:\u003c\/strong\u003e UL 94-V0 rated, high heat resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor Material:\u003c\/strong\u003e Tin-plated pure electrical copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085021054\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many amps does the Blue Sea Systems 2105 BusBar handle?\u003c\/strong\u003e The 2105 MaxiBus BusBar is rated for a continuous load of 250 amps AC\/DC, with a maximum voltage of 300V AC \/ 48V DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 2105 BusBar come with a cover?\u003c\/strong\u003e No, the Blue Sea Systems 2105 is sold without a cover. A cover for this BusBar is available as a separate accessory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many circuits can I connect to the 2105 BusBar?\u003c\/strong\u003e The 2105 provides 12 x #10-24 terminal screws, allowing up to 12 individual circuits to be connected to this BusBar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the main terminal studs on the 2105?\u003c\/strong\u003e The main power connections use 2 x 5\/16\"-18 terminal studs on the Blue Sea Systems 2105 MaxiBus BusBar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 2105 BusBar made from?\u003c\/strong\u003e It uses a tin-plated pure electrical copper conductor mounted on a UL 94-V0 rated base material that resists high heat, giving the 2105 strong conductivity and corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 2105 BusBar mounted?\u003c\/strong\u003e The Blue Sea Systems 2105 has 2 mounting holes that accept #10 (M5) screws for panel installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 2105 BusBar weigh?\u003c\/strong\u003e The Blue Sea Systems 2105 weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 2105 BusBar be used for both AC and DC power distribution?\u003c\/strong\u003e Yes, the 2105 is rated for 250A AC\/DC continuous with a maximum voltage of 300V AC \/ 48V DC, making it suitable for both AC and DC distribution.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat screw size do the terminal connections use on the 2105?\u003c\/strong\u003e The Blue Sea Systems 2105 uses 12 x #10-24 terminal screws for individual circuit connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 2105 BusBar corrosion resistant?\u003c\/strong\u003e Yes, its tin-plated pure electrical copper conductor is designed to resist corrosion while maintaining maximum conductivity, which is important in a marine environment.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989479796955,"sku":"BSS-2105","price":65.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2105.jpg?v=1784507352"},{"product_id":"blue-sea-systems-2104-powerbar-600a-busbar-with-four-3-8-16-terminal-studs","title":"Blue Sea Systems PowerBar 600A BusBar, 4x 3\/8-16 Terminal Studs (2104)","description":"\u003cp\u003eThe Blue Sea Systems PowerBar 2104 is a 600 amp DC power distribution busbar built for high-current marine electrical systems. It carries a continuous rating of 600A DC (545A AC) with a maximum voltage of 300 VAC \/ 48 VDC, making it suited for distributing power from a battery or main power source to multiple circuits from a single, low-resistance point. The busbar mounts on a reinforced polycarbonate base and uses a tin-plated pure electrical copper conductor (CDA 110\/UNS11000) for maximum conductivity, with four 3\/8\"-16 terminal studs for heavy cable connections and four #8-32 stainless steel screws with captive lock washers for securing smaller gauge wires.\u003c\/p\u003e\u003cp\u003eThe busbar and fuse block elevations are matched to common fuse blocks, allowing multiple fuse blocks to be attached directly without extra connecting cables. One-piece serrated flange nuts ensure correct, secure terminal connections, and the busbar can be cut to a shorter length to fit constricted installation spaces. Bi-directional busbar end caps allow additional busbars to be ganged together for larger systems. An insulating cover that meets ABYC and USCG requirements is available separately as part number 2708.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2104\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 600 Amps DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 545 Amps AC \/ 600 Amps DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 300 VAC \/ 48 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Studs:\u003c\/strong\u003e 4 x 3\/8-16\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Screws:\u003c\/strong\u003e 4 x #8-32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Contacts:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tin-Plated Copper CDA 110\/UNS11000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Material:\u003c\/strong\u003e Reinforced Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 7.0 inches (177.8 mm) x 6.25 inches (158.74 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.75 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper Temperature Rating:\u003c\/strong\u003e 250 degrees Fahrenheit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085021047\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of the Blue Sea Systems 2104 busbar?\u003c\/strong\u003e The 2104 PowerBar carries a continuous rating of 600 Amps DC (545 Amps AC), with a maximum voltage of 300 VAC \/ 48 VDC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminal studs does the 2104 have?\u003c\/strong\u003e Four 3\/8-16 terminal studs are provided on the Blue Sea Systems 2104 busbar, plus four #8-32 stainless steel screws for smaller gauge wires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 2104 busbar made from?\u003c\/strong\u003e It uses a tin-plated pure electrical copper conductor (CDA 110\/UNS11000) mounted on a reinforced polycarbonate base for maximum conductivity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 2104 busbar be cut to fit a smaller space?\u003c\/strong\u003e Yes, the 2104 busbar may be cut to a shorter length to accommodate constricted installation spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 2104 come with an insulating cover?\u003c\/strong\u003e No, an insulating cover that meets ABYC and USCG requirements is sold separately as part number 2708 and is not included with the 2104 busbar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat screws are used to mount smaller wires on the 2104?\u003c\/strong\u003e Four stainless steel #8-32 screws with captive lock washers secure smaller gauge wire connections on the 2104 busbar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 2104 compare to the Blue Sea Systems 2107?\u003c\/strong\u003e The 2104 has four 3\/8-16 terminal studs and measures 7.0 inches by 6.25 inches, while the 2107 is a larger busbar with eight 3\/8-16 terminal studs and measures 11.375 inches by 10.375 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan multiple 2104 busbars be connected together?\u003c\/strong\u003e Yes, the 2104 features bi-directional busbar end caps that allow additional busbars to be ganged together for larger power distribution systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 2104 busbar weigh?\u003c\/strong\u003e The Blue Sea Systems 2104 PowerBar weighs 1.75 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 2104 busbar?\u003c\/strong\u003e The 2104 measures 7.0 inches (177.8 mm) by 6.25 inches (158.74 mm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum operating temperature of the 2104?\u003c\/strong\u003e The 2104 busbar carries an upper temperature rating of 250 degrees Fahrenheit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the 2104 use elevated fuse block spacing?\u003c\/strong\u003e The busbar and fuse block elevations on the 2104 match common fuse blocks, allowing multiple fuse blocks to attach directly to it and eliminating the need for separate connecting cables.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989479928027,"sku":"BSS-2104","price":139.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2104.jpg?v=1784507349"},{"product_id":"blue-sea-systems-2126-maxibus-250a-busbar-6-x-5-16-18-studs-tin-plated-copper-no-cover","title":"Blue Sea Systems 2126 250 Amp MaxiBus BusBar, 6-Stud 5\/16-18 Common Bus Bar","description":"\u003cp\u003eThe Blue Sea Systems 2126 is a 250 amp MaxiBus BusBar built for consolidating multiple electrical connections onto a single common bus in a boat's DC or AC electrical system. It provides six 5\/16-18 terminal studs, giving installers room to gang together battery cables, fuse holders, and circuit leads at one central point instead of stacking connections on a single post. The bus bar is rated for a maximum voltage of 300V AC \/ 48V DC with a continuous current rating of 250A AC\/DC, making it suitable for higher-current distribution points such as battery banks, charging systems, or main power buses.\u003c\/p\u003e\u003cp\u003eConstruction uses tin-plated pure electrical copper for the conductive bus, which maximizes conductivity while resisting corrosion in the marine environment, mounted on a UL 94-V0 rated base material that resists high heat. The bus bar mounts using two mounting holes sized to accept #10 (M5) screws, allowing it to be secured to a panel, bulkhead, or existing mounting surface. With six studs sharing one continuous bus, every stud is electrically common, so this is a shared bus point rather than a set of isolated circuits. This makes the 2126 a practical choice for consolidating grounds, positive distribution, or bonding points where multiple cables need to land on the same electrical potential.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2126\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e MaxiBus BusBar, 6 Stud\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Studs:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Stud Size:\u003c\/strong\u003e 5\/16-18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 300V AC \/ 48V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Current Rating:\u003c\/strong\u003e 250A AC\/DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Holes:\u003c\/strong\u003e 2, sized for #10 (M5) screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Material Rating:\u003c\/strong\u003e UL 94-V0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor Material:\u003c\/strong\u003e Tin-plated pure electrical copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085021269\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of the Blue Sea Systems 2126 MaxiBus BusBar?\u003c\/strong\u003e The 2126 MaxiBus BusBar carries a continuous rating of 250A AC\/DC with a maximum voltage of 300V AC \/ 48V DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminal studs does the 2126 busbar have?\u003c\/strong\u003e It has 6 terminal studs, each sized 5\/16-18, all sharing one common electrical bus.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre all six studs on the Blue Sea Systems 2126 electrically connected?\u003c\/strong\u003e Yes, all six studs on the 2126 are tied to a single continuous bus, so they share the same electrical potential rather than functioning as isolated circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size screws are needed to mount the 2126 BusBar?\u003c\/strong\u003e The 2126 has two mounting holes sized to accept #10 (M5) screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Blue Sea Systems 2126 busbar made from?\u003c\/strong\u003e The conductive bus is tin-plated pure electrical copper for maximum conductivity and corrosion resistance, mounted on a UL 94-V0 rated base material that resists high heat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 2126 MaxiBus BusBar weigh?\u003c\/strong\u003e The Blue Sea Systems 2126 weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Blue Sea Systems 2126?\u003c\/strong\u003e The UPC for the 2126 MaxiBus BusBar is 632085021269.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 2126 be used for AC and DC circuits?\u003c\/strong\u003e Yes, the 2126 is rated for both AC and DC use, with a maximum of 300V AC or 48V DC and a continuous rating of 250A AC\/DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size cable lugs fit the studs on the 2126?\u003c\/strong\u003e The 2126 uses 5\/16-18 terminal studs, so ring terminals or lugs sized for a 5\/16 inch stud will fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Blue Sea Systems 2126 come with a cover?\u003c\/strong\u003e The 2126 is the bare 6-stud MaxiBus BusBar without a cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a MaxiBus BusBar used for on a boat?\u003c\/strong\u003e A MaxiBus BusBar like the Blue Sea Systems 2126 is used to consolidate multiple electrical connections, such as battery cables or circuit leads, onto one common terminal point instead of stacking them on a single post.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989479960795,"sku":"BSS-2126","price":70.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2126.jpg?v=1784507356"},{"product_id":"blue-sea-systems-2127-maxibus-250a-busbar-4-studs-5-16-18-tin-plated-copper","title":"Blue Sea Systems 2127 250 Amp MaxiBus BusBar, 4 Stud, Tin-Plated Copper","description":"\u003cp\u003eThe Blue Sea Systems 2127 is a 250 Amp MaxiBus BusBar built for distributing power across multiple circuits from a single high-capacity connection point. It is constructed from tin-plated pure electrical copper for maximum conductivity and corrosion resistance, mounted on a UL 94-V0 rated base material that resists high heat. The busbar is rated for a continuous rating of 250A AC\/DC with a maximum voltage of 300V AC \/ 48V DC, making it suitable for demanding DC power distribution tasks such as battery banks, panel feeds, and accessory circuits aboard a boat.\u003c\/p\u003e\u003cp\u003eThe busbar provides 4 isolated circuits and terminal studs sized 6 x 5\/16 inch-18, allowing multiple ring terminals to be landed on a common power source without daisy-chaining wires or stacking terminals on a single stud. Two mounting holes accept #10 (M5) screws for secure panel or bulkhead installation. This busbar ships without a cover, so it should be installed with appropriate insulation or enclosure protection in the final installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2127\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e MaxiBus BusBar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Studs:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Studs:\u003c\/strong\u003e 6 x 5\/16 inch-18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Voltage:\u003c\/strong\u003e 300V AC \/ 48V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 250A AC\/DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Holes:\u003c\/strong\u003e 2, accept #10 (M5) screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tin-Plated Copper CDA 110 \/ UNS 11000, UL 94-V0 rated base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Circuits:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 782124493332, 796793504244, 632085021276\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the continuous amperage rating of the Blue Sea Systems 2127 MaxiBus BusBar?\u003c\/strong\u003e It carries a continuous rating of 250A AC\/DC, with a maximum voltage of 300V AC \/ 48V DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many circuits does part number 2127 support?\u003c\/strong\u003e The 2127 MaxiBus BusBar supports 4 isolated circuits, each landed on its own terminal stud.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the terminal studs on this busbar?\u003c\/strong\u003e Terminal studs on the Blue Sea Systems 2127 are sized 6 x 5\/16 inch-18.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 2127 busbar come with a cover?\u003c\/strong\u003e No, the 2127 ships without a cover, so it should be paired with suitable insulation or an enclosure during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the busbar made from?\u003c\/strong\u003e It is made from tin-plated pure electrical copper (CDA 110 \/ UNS 11000) on a UL 94-V0 rated base material that resists high heat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Blue Sea Systems 2127 mounted?\u003c\/strong\u003e Two mounting holes accept #10 (M5) screws for securing the busbar to a panel or bulkhead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 2127 MaxiBus BusBar weigh?\u003c\/strong\u003e The 2127 weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 2127 rated for both AC and DC use?\u003c\/strong\u003e Yes, it is rated 250A continuous for both AC and DC, with a maximum voltage of 300V AC or 48V DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies to the Blue Sea Systems 2127?\u003c\/strong\u003e The 2127 MaxiBus BusBar carries a lifetime warranty from Blue Sea Systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use a copper busbar instead of individual wire splices?\u003c\/strong\u003e The 2127 lets multiple ring terminals land directly on isolated studs, avoiding daisy-chained wires or stacked terminals on a single connection point.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989480550619,"sku":"BSS-2127","price":54.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2127.jpg?v=1784506973"},{"product_id":"blue-sea-systems-2300-common-busbar-150a-dc-10-x-8-32-screw-terminals-with-insulating-cover","title":"Blue Sea Systems 2300 Common BusBar, 150A, 10-Gang Screw Terminal with Insulating Cover","description":"\u003cp\u003eThe Blue Sea Systems 2300 Common BusBar is a 10-gang DC distribution point built for consolidating multiple positive or negative circuits at a single, secure connection. It is rated for 130A AC \/ 150A DC continuous current and a maximum voltage of 300V AC \/ 48V DC, making it suitable as a central ground or power distribution bus in marine, RV, and industrial 12V\/24V electrical panels. Each of the 10 terminal positions accepts a #8-32 screw, and the busbar also includes 2 x 1\/4\"-20 terminal studs for larger supply or ground cable connections, letting you feed the bus from a heavier main cable while branching out to smaller circuits.\u003c\/p\u003e\u003cp\u003eThe busbar body is molded from durable plastic in black, and this part number ships with its insulating cover included, protecting the exposed terminals from accidental contact or dropped tools once wiring is complete. The compact footprint (1.25 inches wide x 4.25 inches high) allows it to be screw-mounted in tight panel spaces while still providing 10 usable connection points for grounding multiple circuits back to a single bus.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2300\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Common BusBar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Current Rating:\u003c\/strong\u003e 130A AC \/ 150A DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 300V AC \/ 48V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Screw:\u003c\/strong\u003e 10 x #8-32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Stud:\u003c\/strong\u003e 2 x 1\/4\"-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Terminals:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulating Cover:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Screw Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 1.25 inches W x 4.25 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.37 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085023003\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many circuits can the Blue Sea Systems 2300 BusBar handle?\u003c\/strong\u003e The 2300 Common BusBar has 10 screw terminal positions (10 x #8-32), plus 2 x 1\/4\"-20 terminal studs for larger cable connections, so it can consolidate up to 10 individual circuits onto one bus.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of the Blue Sea Systems 2300?\u003c\/strong\u003e It is rated for 130A AC \/ 150A DC continuous current, with a maximum voltage of 300V AC \/ 48V DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 2300 BusBar come with a cover?\u003c\/strong\u003e Yes, the Blue Sea Systems 2300 ships with its insulating cover included, shielding the terminals from accidental contact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size screws and studs does the 2300 BusBar use?\u003c\/strong\u003e The 10 main terminal positions use #8-32 screws, and there are 2 x 1\/4\"-20 terminal studs for heavier supply or ground cables on the Blue Sea Systems 2300.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Blue Sea Systems 2300 BusBar made of?\u003c\/strong\u003e It is molded from black plastic for the insulating body and cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 2300 Common BusBar?\u003c\/strong\u003e The Blue Sea Systems 2300 measures 1.25 inches wide by 4.25 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 2300 BusBar weigh?\u003c\/strong\u003e It weighs 0.37 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 2300 BusBar mounted?\u003c\/strong\u003e The Blue Sea Systems 2300 is a screw-mount busbar, designed to be fastened directly to a panel or bulkhead near the electrical distribution point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 2300 BusBar be used as a ground distribution point?\u003c\/strong\u003e Yes, as a common busbar it can serve as either a shared positive or a shared negative (ground) distribution point for multiple circuits, since all 10 terminals are electrically connected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 2300 suitable for marine use?\u003c\/strong\u003e Yes, the 2300 Common BusBar is designed for marine, RV, and industrial DC electrical systems requiring a consolidated multi-circuit connection point.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989484122331,"sku":"BSS-2300","price":24.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2300.jpg?v=1784506977"},{"product_id":"blue-sea-systems-2301-150a-common-busbar-10-screw-terminals-2-studs-tin-plated-copper","title":"Blue Sea Systems 2301 150 Amp Common BusBar with 10 Terminal Screws","description":"\u003cp\u003eThe Blue Sea Systems 2301 is a 150 amp common BusBar built to distribute power to multiple circuits from a single source aboard a boat or in any DC\/AC electrical panel. It uses a reinforced polycarbonate base paired with tin plated pure electrical copper to deliver maximum conductivity while resisting corrosion in a marine environment. The base carries a UL 94-V0 flammability rating, and the bar is rated for a maximum voltage of 300V AC \/ 48V DC with a continuous rating of 130A AC \/ 150A DC, making it suitable for both AC and DC distribution tasks.\u003c\/p\u003e\u003cp\u003eThis BusBar includes 10 screw terminals (#8-32) for connecting individual circuit wires, plus 2 terminal studs (1\/4\"-20) for the main power feed connections. Two mounting holes are sized to accept #10 (M5) screws for secure panel or bulkhead installation. It ships as a single BusBar unit with all 10 terminal screws included, ready to wire into a new or existing electrical distribution setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2301\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Busbar 10 Term-150 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 130 Amps AC \/ 150 Amps DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 300 Volts AC \/ 48 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Screws:\u003c\/strong\u003e 10 x #8-32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Studs:\u003c\/strong\u003e 2 x 1\/4 inch-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Holes:\u003c\/strong\u003e 2, accept #10 (M5) screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Material:\u003c\/strong\u003e Reinforced polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor Material:\u003c\/strong\u003e Tin plated pure electrical copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification Met:\u003c\/strong\u003e UL 94-V0 rated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Poles:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.34 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amp rating of the Blue Sea Systems 2301 BusBar?\u003c\/strong\u003e The Blue Sea Systems 2301 is rated for a continuous 130 amps AC or 150 amps DC, with a maximum voltage of 300V AC \/ 48V DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does part number 2301 have?\u003c\/strong\u003e It has 10 screw terminals (#8-32) for individual circuit connections plus 2 terminal studs (1\/4 inch-20) for the main power feed, for a total of 10 numbered positions across 2 poles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 2301 BusBar made of?\u003c\/strong\u003e The 2301 uses a reinforced polycarbonate base combined with tin plated pure electrical copper conductors, chosen for maximum conductivity and resistance to corrosion in marine settings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Blue Sea Systems 2301 mounted?\u003c\/strong\u003e Two mounting holes on the base accept #10 (M5) screws, allowing the BusBar to be secured to a panel or bulkhead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size wire terminals fit the 2301?\u003c\/strong\u003e The 10 screw terminals are sized #8-32, and the 2 main power studs are sized 1\/4 inch-20.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 2301 rated for AC or DC circuits?\u003c\/strong\u003e Both: the 2301 is rated 130 amps continuous on AC circuits up to 300V, or 150 amps continuous on DC circuits up to 48V.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 2301 BusBar meet a flammability standard?\u003c\/strong\u003e Yes, the polycarbonate base of the 2301 is UL 94-V0 rated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 2301 BusBar weigh?\u003c\/strong\u003e The 2301 BusBar weighs 0.34 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included with the 2301 BusBar?\u003c\/strong\u003e The 2301 ships as a single BusBar unit complete with all 10 terminal screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 2301 be used to distribute power to multiple circuits from one source?\u003c\/strong\u003e Yes, that is its primary purpose: the 2301 common BusBar lets multiple circuits draw from a single power feed through its 10 screw terminals and 2 main studs.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989484155099,"sku":"BSS-2301","price":22.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2301.jpg?v=1784507360"},{"product_id":"blue-sea-systems-2303-common-busbar-150a-4-x-1-4-20-studs-no-cover","title":"Blue Sea Systems 2303 Common BusBar, 150 Amp, 4 Stud 1\/4-20, No Cover","description":"\u003cp\u003eThe Blue Sea Systems 2303 is a 150 amp common busbar built to distribute power or ground connections across four separate circuits from a single point. It features 4 terminal studs sized 1\/4\"-20, giving installers a secure, high-conductivity connection point for battery cable lugs, ring terminals, and other electrical connections in a boat's DC or AC electrical system. The busbar is rated for a max voltage of 300V AC \/ 48V DC, with a continuous rating of 130A AC \/ 150A DC, making it suitable for main power distribution, ground bus, or accessory feed applications where multiple circuits need to share a common connection.\u003c\/p\u003e\u003cp\u003eConstruction pairs a reinforced polycarbonate base with tin-plated pure electrical copper busbar material, delivering strong conductivity while resisting corrosion in the marine environment. The base includes 2 mounting holes that accept #10 (M5) screws for secure panel or bulkhead mounting. This version of the 2303 ships without a cover; buyers who want a protective cover over the exposed studs can use the Blue Sea Systems 2715 cover, which is designed to fit this busbar.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2303\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Rating:\u003c\/strong\u003e 150 amp DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 130A AC \/ 150A DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Voltage:\u003c\/strong\u003e 300V AC \/ 48V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Studs:\u003c\/strong\u003e 4 x 1\/4\"-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Holes:\u003c\/strong\u003e 2 holes, accept #10 (M5) screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Cover:\u003c\/strong\u003e Blue Sea Systems 2715\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Reinforced polycarbonate base with tin-plated pure electrical copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 1.5\" L x 2\" W x 8\" H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.35 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085023034\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal marine electrical busbar; not vehicle- or engine-specific.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers apply to this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many amps is the Blue Sea Systems 2303 busbar rated for?\u003c\/strong\u003e The 2303 is rated for a continuous 150A DC (130A AC), with a max voltage of 300V AC \/ 48V DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 2303 busbar come with a cover?\u003c\/strong\u003e No, part number 2303 ships without a cover. Blue Sea Systems sells the 2715 cover separately, which is designed to fit the 2303.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many studs does the 2303 have?\u003c\/strong\u003e It has 4 terminal studs, each sized 1\/4\"-20, allowing up to four circuits to be connected to the same busbar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size screws does the 2303 busbar mount with?\u003c\/strong\u003e The busbar has 2 mounting holes that accept #10 (M5) screws for securing it to a panel or bulkhead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 2303 busbar made of?\u003c\/strong\u003e It uses a reinforced polycarbonate base combined with tin-plated pure electrical copper for the current-carrying busbar, giving strong conductivity and corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Blue Sea Systems 2303?\u003c\/strong\u003e The 2303 measures 1.5 inches long by 2 inches wide by 8 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 2303 busbar weigh?\u003c\/strong\u003e It weighs 0.35 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 2303 be used for both power and ground distribution?\u003c\/strong\u003e Yes, as a common busbar the 2303 can be used to distribute power or ground connections across its 4 studs, depending on how it is wired into the system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 2303 and the 2307 busbar?\u003c\/strong\u003e Both are 4-stud, 1\/4\"-20 busbars from Blue Sea Systems, but the 2307 comes with a cover while the 2303 does not.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a version of this busbar with a cover already installed?\u003c\/strong\u003e Blue Sea Systems part 2307 is the covered equivalent; the 2303 covered here ships without a cover, and the 2715 cover can be added separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage can the 2303 busbar handle?\u003c\/strong\u003e The 2303 is rated for a maximum of 300V AC or 48V DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 2303?\u003c\/strong\u003e You receive one Blue Sea Systems 2303 busbar; no cover or mounting hardware is included with this part.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989484482779,"sku":"BSS-2303","price":27.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2303.jpg?v=1784507363"},{"product_id":"blue-sea-systems-2302-150a-common-busbar-20-x-8-32-screw-terminals-uncovered","title":"Blue Sea Systems 2302 MaxiBus 250 Amp Common Bus Bar, 20-Terminal 8-32 Screw, Without Cover","description":"\u003cp\u003eThe Blue Sea Systems 2302 is a 250 amp MaxiBus common bus bar built to distribute power or ground connections across a marine 12-volt or 24-volt DC electrical system from a single high-capacity source. It provides 20 individual 8-32 screw terminal positions, allowing multiple circuits to be landed on one common point instead of daisy-chaining wires or stacking ring terminals on a single stud. The bus bar uses insert-molded stainless steel studs set into an insulated base, which keeps the terminals rigid and corrosion-resistant in a marine environment while isolating the conductive path from the mounting surface. This 2302 version is supplied without a cover, so the terminals remain fully exposed for easy wire access and inspection; a covered version (2312) and an alternate uncovered variant (2303) are offered as separate part numbers in the same family if a different configuration is needed. With a centerline length of 13 inches and an overall footprint of 1 inch wide by 12 inches tall, the 2302 is sized to mount in a standard electrical panel, battery compartment, or accessory bay alongside other Blue Sea Systems components. It is a common choice for consolidating grounds, distributing accessory power, or organizing a bus system feeding multiple breakers, fuses, or electronics on a boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2302\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Family:\u003c\/strong\u003e MaxiBus Common Bus Bars\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 250 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Terminals:\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Screw Size:\u003c\/strong\u003e 8-32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e Screw Terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Material:\u003c\/strong\u003e Insert-molded stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover:\u003c\/strong\u003e Without cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 48 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 1 inch W x 12 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenterline Length:\u003c\/strong\u003e 13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.51 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many amps is the Blue Sea Systems 2302 bus bar rated for?\u003c\/strong\u003e The Blue Sea Systems 2302 MaxiBus common bus bar is rated for 250 amps of continuous current.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 2302 come with a cover?\u003c\/strong\u003e No. The 2302 is the without-cover version of the MaxiBus common bus bar; a covered version is sold separately as part number 2312.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminal positions does the 2302 have?\u003c\/strong\u003e The 2302 has 20 individual 8-32 screw terminal positions for landing circuits on a common connection point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size screws does the 2302 use for terminal connections?\u003c\/strong\u003e Each of the 20 terminal positions on the Blue Sea Systems 2302 uses an 8-32 screw.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the studs made of on the 2302 bus bar?\u003c\/strong\u003e The 2302 uses insert-molded stainless steel studs set into an insulated base for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 2302, 2303, and 2312?\u003c\/strong\u003e All three are MaxiBus common bus bars in the same family; the 2302 and 2303 are supplied without a cover while the 2312 includes an insulating cover with breakouts for wire access.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the 2302 rated for?\u003c\/strong\u003e The Blue Sea Systems 2302 bus bar is rated up to 48 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 2302?\u003c\/strong\u003e The 2302 measures 1 inch wide by 12 inches tall overall, with a centerline length of 13 inches between the terminal positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 2302 bus bar weigh?\u003c\/strong\u003e The Blue Sea Systems 2302 weighs 0.51 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a MaxiBus common bus bar used for?\u003c\/strong\u003e It is used to distribute power or consolidate ground connections across multiple circuits from a single feed point, replacing the need to stack multiple ring terminals on one stud.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 2302 be mounted in a standard electrical panel?\u003c\/strong\u003e Yes, the 2302's compact 1 inch by 12 inch footprint is sized to fit in a standard marine electrical panel, battery compartment, or accessory bay.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989485465819,"sku":"BSS-2302","price":32.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2302.jpg?v=1784506980"},{"product_id":"blue-sea-systems-2304-mini-busbar-100a-marine-busbar-5-screw-terminals-2-studs-300v-ac-48v-dc-no-cover","title":"Blue Sea Systems 2304 Mini BusBar, 100 Amp, 5-Terminal Power Distribution Block, No Cover, Black","description":"\u003cp\u003eThe Blue Sea Systems 2304 Mini BusBar is a compact power distribution block that lets you feed one input source out to multiple circuits from a single, organized point instead of stacking connections on a single terminal. It is built around a tin-plated copper C11000 bus mounted on a reinforced polycarbonate base, giving it strong electrical conductivity along with corrosion resistance in the marine environment. The 2304 has one input terminal sized for 8 AWG to 4 AWG wire and four load terminals sized for 16 AWG to 10 AWG wire, making it well suited for splitting a single battery or charging source feed into several smaller circuits on a boat's DC or AC electrical panel. It carries a continuous rating of 100 Amps AC \/ 100 Amps DC with a maximum operating voltage of 300 Volts AC \/ 48 Volts DC, and it is CE marked. Two mounting holes accept 1\/4 inch (6mm) screws for a secure panel or bulkhead installation. This part number, 2304, ships without a cover; Blue Sea Systems offers a covered version as a separate part for installations where a protective cover is required. The busbar is finished in black and is a straightforward, no-frills way to add a clean, code-friendly power distribution point to a marine electrical system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2304\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 100 Amps AC \/ 100 Amps DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Voltage:\u003c\/strong\u003e 300 Volts AC \/ 48 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Wire Size:\u003c\/strong\u003e 8 AWG to 4 AWG (1 terminal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Wire Size:\u003c\/strong\u003e 16 AWG to 10 AWG (4 terminals)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Holes:\u003c\/strong\u003e Accepts 1\/4 inch (6mm) screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBus Material:\u003c\/strong\u003e Tin-plated copper C11000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover:\u003c\/strong\u003e Not included (cover sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 5.98 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 0.98 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e CE marked\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085023041\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage rating of the Blue Sea Systems 2304 Mini BusBar?\u003c\/strong\u003e The 2304 Mini BusBar carries a continuous rating of 100 Amps AC and 100 Amps DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes part number 2304 come with a cover?\u003c\/strong\u003e No, the 2304 ships without a cover; a covered version of this Mini BusBar is available from Blue Sea Systems as a separate part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire sizes fit the 2304 busbar?\u003c\/strong\u003e The single input terminal accepts 8 AWG to 4 AWG wire, and the four load terminals accept 16 AWG to 10 AWG wire on the Blue Sea Systems 2304.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum voltage rating for this busbar?\u003c\/strong\u003e 300 Volts AC \/ 48 Volts DC is the maximum operating voltage of the 2304 Mini BusBar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bus made from?\u003c\/strong\u003e Tin-plated copper C11000 forms the current-carrying bus on the 2304, mounted on a reinforced polycarbonate base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does the 2304 Mini BusBar have?\u003c\/strong\u003e Five total: one input terminal (8 AWG to 4 AWG) and four load terminals (16 AWG to 10 AWG).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 2304 Mini BusBar weigh?\u003c\/strong\u003e The 2304 weighs 0.16 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size screws do the mounting holes accept?\u003c\/strong\u003e The mounting holes on the 2304 accept 1\/4 inch (6mm) screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 2304 busbar CE marked?\u003c\/strong\u003e Yes, the Blue Sea Systems 2304 Mini BusBar is CE marked.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan a cover be added to the 2304 busbar later?\u003c\/strong\u003e Yes, Blue Sea Systems sells a covered Mini BusBar as a separate part for installations that need a cover, since the 2304 itself ships without one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 2304 Mini BusBar?\u003c\/strong\u003e It is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 2304 Mini BusBar used for?\u003c\/strong\u003e It distributes power from a single input source out to multiple circuits, giving the 2304 a role as a compact power distribution point on a boat's electrical panel.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989485957339,"sku":"BSS-2304","price":15.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2304.jpg?v=1784506984"},{"product_id":"blue-sea-systems-2312-maxibus-150a-common-busbar-with-insulating-cover-20-x-8-32-screw-terminals","title":"Blue Sea Systems 2312 Common BusBar, 150 Amp, 20-Position 8-32 Screw Terminal with Cover","description":"\u003cp\u003eThe Blue Sea Systems 2312 is a 150 ampere common busbar built for consolidating multiple positive or negative connections onto a single, low-resistance point in a 12V or 24V DC marine electrical system. It is designed with a stud-based terminal that provides direct terminal-to-bus contact for a low-resistance connection, and the bus itself is tin-plated copper (CDA 110\/UNS11000) for maximum conductivity and corrosion resistance. The base is molded from glass-reinforced polycarbonate rated UL 94-VO (self-extinguishing) to resist high heat, and the busbar ships with a press-on polycarbonate insulating cover that snaps onto the studs while leaving the wire terminals unobstructed for easy access. The raised bus design lets multiple wires land on a single screw terminal, simplifying circuits that need to share a common connection point.\u003c\/p\u003e\u003cp\u003eElectrically, the 2312 carries a continuous rating of 130 amperes AC and 150 amperes DC, with a maximum voltage rating of 300 volts AC and 48 volts DC. It has 20 positions total: stainless steel 1\/4\"-20 studs (torqued to 72 in-lbs, accepting a 1\/4\" or M6 ring terminal) along with stainless steel #8-32 screw terminals (torqued to 18 in-lbs, accepting a #8 or M4 ring terminal). This combination of stud and screw terminals allows both heavy main-circuit cables and smaller branch-circuit wires to be terminated on the same busbar.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2312\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Amperage (AC):\u003c\/strong\u003e 130 Amperes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Amperage (DC):\u003c\/strong\u003e 150 Amperes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage Rating (AC):\u003c\/strong\u003e 300 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage Rating (DC):\u003c\/strong\u003e 48 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBus Material:\u003c\/strong\u003e Tin-Plated Copper CDA 110\/UNS11000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Material:\u003c\/strong\u003e Glass Reinforced Polycarbonate, UL 94-VO Rated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Terminals:\u003c\/strong\u003e Stainless Steel, 1\/4\"-20, torque 72 in-lbs, accepts 1\/4\" (M6) ring terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Terminals:\u003c\/strong\u003e Stainless Steel, #8-32, torque 18 in-lbs, accepts #8 (M4) ring terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.57 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085023126\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage rating of the Blue Sea Systems 2312 busbar?\u003c\/strong\u003e The 2312 is rated for 130 amperes continuous AC and 150 amperes continuous DC, with a maximum voltage rating of 300 volts AC and 48 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 2312 come with a cover?\u003c\/strong\u003e Yes, the Blue Sea Systems 2312 includes a press-on polycarbonate insulating cover that attaches over the studs while still allowing unobstructed access to the wire terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminal positions does this busbar have?\u003c\/strong\u003e It has 20 positions total, combining stainless steel 1\/4\"-20 studs with stainless steel #8-32 screw terminals on the same bus.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size ring terminals fit the stud connections on the 2312?\u003c\/strong\u003e The 1\/4\"-20 stainless steel studs accept a 1\/4 inch (M6) ring terminal and should be torqued to 72 in-lbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size ring terminals fit the screw terminals on the 2312?\u003c\/strong\u003e The #8-32 stainless steel screw terminals accept a #8 (M4) ring terminal and should be torqued to 18 in-lbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the bus made from on the 2312?\u003c\/strong\u003e The bus is tin-plated copper (CDA 110\/UNS11000), chosen for high conductivity and resistance to corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the base material heat resistant?\u003c\/strong\u003e Yes, the base of the Blue Sea Systems 2312 is glass reinforced polycarbonate rated UL 94-VO, meaning it is self-extinguishing and resists high heat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 2312 busbar weigh?\u003c\/strong\u003e The Blue Sea Systems 2312 weighs 0.57 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 2312 be used for both positive and negative common connections?\u003c\/strong\u003e The 2312 is a common busbar designed to consolidate multiple wires onto a single low-resistance point, and can be used as either a positive or negative distribution point in a DC electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 2312 and the version without a cover?\u003c\/strong\u003e The 2312 ships with a press-on insulating cover; a version of the same busbar without the cover is sold under a different part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the 2312 have both stud and screw terminals instead of just one type?\u003c\/strong\u003e The stud terminals (1\/4\"-20) handle heavier main-circuit cables while the smaller #8-32 screw terminals handle lighter branch-circuit wires, letting both be landed on the same busbar.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989486317787,"sku":"BSS-2312","price":38.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2312.jpg?v=1784507371"},{"product_id":"blue-sea-systems-2314-minibus-100a-common-busbar-5-x-8-32-studs-w-cover-tin-plated-copper","title":"Blue Sea Systems 2314 MiniBus Common Bus Bar, 5 x #8-32 and 2 x #10-32 Studs, 100A, with Cover","description":"\u003cp\u003eThe Blue Sea Systems 2314 is a MiniBus common (bussed) distribution bus bar built for organizing positive or negative DC circuits, or for collecting AC grounding conductors, at a single terminal point. It combines two stud sizes on one bus: 5 stud terminals sized #8-32 for smaller-gauge circuits and 2 stud terminals sized #10-32 for higher-current connections, giving installers flexibility to land multiple circuit wires without stacking ring terminals on a single post. The bus itself is tin-plated copper C11000, chosen for strong conductivity and resistance to corrosion in a marine environment. A protective cover is included with this model, shielding the live studs from accidental contact or dropped tools once wiring is complete.\u003c\/p\u003e\u003cp\u003eElectrically, the 2314 is rated for 100 Amps AC and 100 Amps DC continuous, with a maximum operating voltage of 300V AC or 48V DC, and it is UL listed. Mounting holes accept 1\/4 inch (6mm) screws for securing the bus bar to a panel or bulkhead. It is commonly used as a ground bus, a positive distribution point, or an AC grounding collection point in a DC or AC electrical panel.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2314\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Terminals:\u003c\/strong\u003e 5 x #8-32 and 2 x #10-32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 100 Amps AC \/ 100 Amps DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Voltage:\u003c\/strong\u003e 300V AC \/ 48V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Holes:\u003c\/strong\u003e Accepts 1\/4 inch (6mm) screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBus Material:\u003c\/strong\u003e Tin-plated copper C11000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Stud mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulatory Listing:\u003c\/strong\u003e UL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper Temperature Rating:\u003c\/strong\u003e 215 degrees Celsius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085023140\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.18 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Blue Sea Systems 2314 used for?\u003c\/strong\u003e The 2314 MiniBus is a common bus bar used to distribute a single positive or negative DC circuit to multiple loads, or to collect multiple AC grounding conductors at one terminal point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does the 2314 bus bar have?\u003c\/strong\u003e It has 7 stud terminals total: 5 studs sized #8-32 and 2 studs sized #10-32, letting smaller and larger gauge wires connect on the same bus.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 2314 come with a cover?\u003c\/strong\u003e Yes, the Blue Sea Systems 2314 includes a protective cover to shield the stud terminals from accidental contact once wiring is complete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of the 2314 MiniBus?\u003c\/strong\u003e The 2314 is rated for 100 Amps AC and 100 Amps DC continuous.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum voltage for the 2314 bus bar?\u003c\/strong\u003e Maximum operating voltage is 300V AC or 48V DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the bus made from?\u003c\/strong\u003e The bus itself is tin-plated copper C11000, chosen for conductivity and corrosion resistance, with a plastic housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size screws mount the 2314 to a panel?\u003c\/strong\u003e The 2314 mounting holes accept 1\/4 inch (6mm) screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 2314 UL listed?\u003c\/strong\u003e Yes, the 2314 MiniBus bus bar is UL listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 2314 weigh?\u003c\/strong\u003e The Blue Sea Systems 2314 weighs 0.18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 2314 be used for AC grounding?\u003c\/strong\u003e Yes, the 2314 is suited for collecting AC grounding conductors as well as DC positive or negative distribution.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Blue Sea Systems 2314?\u003c\/strong\u003e The UPC for the 2314 MiniBus bus bar is 632085023140.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989487104219,"sku":"BSS-2314","price":18.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2314.jpg?v=1784507375"},{"product_id":"blue-sea-systems-2305-100a-mini-busbar-4-x-10-32-studs-300v-ac-48v-dc-without-cover","title":"Blue Sea Systems 2305 Mini BusBar, 100 Amp 4-Stud DC\/AC Common Distribution Terminal, No Cover","description":"\u003cp\u003eThe Blue Sea Systems 2305 Mini BusBar is a compact common distribution terminal built for organizing DC positive circuits or collecting DC negative and AC grounding conductors onto a single bus. It provides four #10-32 studs on a tin-plated copper C11000 bus set into a reinforced base, giving builders and installers a clean, code-compliant way to consolidate multiple wire runs at one connection point instead of daisy-chaining ring terminals. The bus carries a continuous rating of 100 Amp AC and 100 Amp DC, with a maximum operating voltage of 300V AC \/ 48V DC, so it is sized for typical helm, panel, and engine-room distribution tasks. The single input terminal accepts 8 AWG to 4 AWG wire for the incoming feed, while the four load terminals accept 16 AWG to 10 AWG wire for downstream circuits, making it suitable for splitting one supply into several branch circuits. Two mounting holes sized for 1\/4 inch (6mm) screws allow it to be fastened to a panel or bulkhead. This version of the 2305 is sold without a cover; Blue Sea Systems offers part number 2713 as the matching cover for the 2304 and 2305 MiniBus. Four write-on circuit labels are included for marking each connection point, helping keep multi-circuit panels organized and easy to trace during installation or troubleshooting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2305\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 100 Amp AC \/ 100 Amp DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Voltage:\u003c\/strong\u003e 300 Volt AC \/ 48 Volt DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Wire Size:\u003c\/strong\u003e 8 AWG to 4 AWG (1 terminal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Wire Size:\u003c\/strong\u003e 16 AWG to 10 AWG (4 terminals)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Studs:\u003c\/strong\u003e 4 x #10-32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Holes:\u003c\/strong\u003e Accepts 1\/4 inch (6mm) screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBus Material:\u003c\/strong\u003e Tin-Plated Copper C11000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Material:\u003c\/strong\u003e Reinforced polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Circuits:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Labels:\u003c\/strong\u003e Four write-on labels included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover:\u003c\/strong\u003e Sold without cover; compatible cover is part number 2713\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 1.19 inches long x 1.88 inches wide x 7.88 inches high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage rating of the Blue Sea Systems 2305 Mini BusBar?\u003c\/strong\u003e The 2305 carries a continuous rating of 100 Amp AC and 100 Amp DC, with a maximum operating voltage of 300V AC \/ 48V DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many studs does the 2305 Mini BusBar have?\u003c\/strong\u003e Four #10-32 studs are provided on the Blue Sea Systems 2305, allowing up to four load circuits to be terminated onto the common bus.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 2305 come with a protective cover?\u003c\/strong\u003e No, this version of the 2305 is sold without a cover. Blue Sea Systems part number 2713 is the matching cover for the 2304 and 2305 MiniBus and can be ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire sizes can be terminated on the 2305?\u003c\/strong\u003e The single input terminal on the 2305 accepts 8 AWG to 4 AWG wire, while each of the four load terminals accepts 16 AWG to 10 AWG wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 2305 be used for negative or grounding connections, not just positive?\u003c\/strong\u003e Yes, the 2305 Mini BusBar is designed for positive distribution or for collecting DC negative or AC grounding conductors onto one common bus.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bus made of on the 2305?\u003c\/strong\u003e The bus on the Blue Sea Systems 2305 is tin-plated copper C11000, set into a reinforced polycarbonate base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the 2305?\u003c\/strong\u003e The 2305 measures 1.19 inches long by 1.88 inches wide by 7.88 inches high and weighs 0.16 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hardware does the 2305 require?\u003c\/strong\u003e The mounting holes on the 2305 accept 1\/4 inch (6mm) screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre circuit labels included with the 2305?\u003c\/strong\u003e Yes, four write-on circuit labels are included with the Blue Sea Systems 2305 for marking each connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 2305 and the 2314 MiniBus?\u003c\/strong\u003e The 2305 ships without a cover and has 4 x #10-32 studs, while the 2314 is available with a cover option and uses 5 x #8-32 plus 2 x #10-32 studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 2305 covered by a warranty?\u003c\/strong\u003e Yes, the Blue Sea Systems 2305 Mini BusBar is backed by a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many circuits can be run from a single 2305?\u003c\/strong\u003e The 2305 supports 4 circuits off its four #10-32 load studs, fed from one input terminal.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989487988955,"sku":"BSS-2305","price":17.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2305.jpg?v=1784507367"},{"product_id":"blue-sea-systems-2315-minibus-100a-common-busbar-4-x-10-32-studs-with-cover","title":"Blue Sea Systems 2315 MiniBus 100 Amp Common BusBar with Cover, 4 x #10-32 Studs","description":"\u003cp\u003eThe Blue Sea Systems 2315 MiniBus is a 100 amp common distribution busbar built for consolidating DC positive or negative connections, or AC grounding conductors, on a boat's electrical panel. It provides one 8 AWG to 4 AWG input terminal feeding four 16 AWG to 10 AWG load terminals, all on #10-32 studs, making it a compact way to split a single power or ground feed out to multiple circuits without daisy-chaining wires. The bus itself is tin-plated copper C11000 for low-resistance, corrosion-resistant conductivity, mounted on a reinforced polycarbonate base with a clear polycarbonate cover included to guard against accidental contact with live studs. Mounting holes accept 1\/4 inch (6 mm) screws for a secure panel or bulkhead installation. Rated for 100A AC and 100A DC continuous, with a maximum operating voltage of 300V AC or 48V DC, the 2315 suits both DC battery\/ground distribution and AC grounding conductor consolidation in marine electrical systems. Screw terminals should be torqued to 15 in-lb (1.69 Nm) for a reliable, low-resistance connection. Its compact MiniBus footprint makes it a practical fit for helm panels, battery compartments, and distribution panels where space is limited but multiple circuits need to share a common connection point.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 100 Amps AC \/ 100 Amps DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Voltage:\u003c\/strong\u003e 300 Volts AC \/ 48 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Terminal Studs:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Stud Size:\u003c\/strong\u003e #10-32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Wire Size:\u003c\/strong\u003e 8 AWG to 4 AWG (1 terminal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Wire Size:\u003c\/strong\u003e 16 AWG to 10 AWG (4 terminals)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Holes:\u003c\/strong\u003e Accepts 1\/4 inch (6 mm) screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBus Material:\u003c\/strong\u003e Tin-Plated Copper C11000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Material:\u003c\/strong\u003e Reinforced Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover Material:\u003c\/strong\u003e Clear Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Terminal Torque:\u003c\/strong\u003e 15 in-lb (1.69 Nm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.18 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Blue Sea Systems 2315 used for?\u003c\/strong\u003e The 2315 MiniBus is a common distribution busbar for consolidating DC positive or negative wiring, or AC grounding conductors, at a single point rather than daisy-chaining connections between terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does the 2315 busbar have?\u003c\/strong\u003e It has one 8 AWG to 4 AWG input terminal and four 16 AWG to 10 AWG load terminals, all on #10-32 studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage rating of the Blue Sea 2315?\u003c\/strong\u003e 100 amps continuous, rated for both AC and DC use, with a maximum operating voltage of 300V AC or 48V DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 2315 come with a cover?\u003c\/strong\u003e Yes, the Blue Sea Systems 2315 includes a clear polycarbonate cover to protect against accidental contact with the live terminal studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire sizes fit the 2315 MiniBus?\u003c\/strong\u003e The single input terminal accepts 8 AWG to 4 AWG wire, and each of the four load terminals accepts 16 AWG to 10 AWG wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the bus made of?\u003c\/strong\u003e The current-carrying bus on the 2315 is tin-plated copper C11000, chosen for conductivity and corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 2315 busbar mounted?\u003c\/strong\u003e Its mounting holes accept 1\/4 inch (6 mm) screws for securing the busbar to a panel or bulkhead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much torque should be applied to the terminal screws?\u003c\/strong\u003e Blue Sea specifies a screw terminal torque of 15 in-lb (1.69 Nm) for the 2315's #10-32 stud terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea 2315 weigh?\u003c\/strong\u003e The 2315 MiniBus busbar weighs 0.18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 2315 be used for AC grounding conductors as well as DC?\u003c\/strong\u003e Yes, the 2315 MiniBus is rated for both DC distribution (positive or negative) and for collecting AC grounding conductors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the base of the 2315 busbar made from?\u003c\/strong\u003e The busbar base is reinforced polycarbonate, with a clear polycarbonate cover included over the terminal studs.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989488021723,"sku":"BSS-2315","price":21.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2315.jpg?v=1784506987"},{"product_id":"blue-sea-systems-2504-terminal-block-4-circuit-30a-600v-8-stud","title":"Blue Sea Systems 2504 4-Circuit Terminal Block, 30 Amp 600V, M4 (#8) Stud","description":"\u003cp\u003eThe Blue Sea Systems 2504 is a 4-circuit terminal block built for organizing and isolating power connections aboard a boat. Each of the four screw pairs forms its own independent circuit, so multiple accessories or feeds can share a single mounting location without interacting electrically. The block carries a 30 Amp, 600 Volt AC\/DC rating per circuit and uses M4 (#8) terminal studs, making it suitable for a range of onboard DC and AC wiring tasks where reliable, code-compliant termination is needed.\u003c\/p\u003e\u003cp\u003eA closed-back design fully insulates the live power connections from the mounting surface, reducing the risk of accidental grounding or short circuits when the block is surface-mounted to a panel or bulkhead. If a project calls for tying circuits together into a common bus, Blue Sea Systems jumpers 5035 and 5037 (sold separately) snap across the terminal pairs to combine independent circuits as needed. The 2504 measures 3.25 inches (82.60 mm) overall with a 2.81 inch (71.40 mm) mounting hole spacing, and weighs 0.17 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2504\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Circuits:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 30 Amps per circuit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e 600 Volts AC\/DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Stud Size:\u003c\/strong\u003e M4 (#8)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3.25 inches (82.60 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Spacing:\u003c\/strong\u003e 2.81 inches (71.40 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.17 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface mount, closed-back design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085025045\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many circuits does the Blue Sea Systems 2504 terminal block have?\u003c\/strong\u003e The Blue Sea Systems 2504 has 4 independent circuits, with each screw pair forming its own isolated circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of the 2504 terminal block?\u003c\/strong\u003e Each circuit on the Blue Sea Systems 2504 is rated for 30 Amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the 2504 terminal block rated for?\u003c\/strong\u003e 600 Volts AC\/DC is the rating for each circuit on the 2504 terminal block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size terminal studs does the 2504 use?\u003c\/strong\u003e M4 (#8) terminal studs are used on the Blue Sea Systems 2504.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan circuits on the 2504 be connected together?\u003c\/strong\u003e Yes, Blue Sea Systems jumpers 5035 and 5037 (sold separately) can be added across terminal pairs on the 2504 to combine independent circuits into a common bus.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the 2504 have a closed-back design?\u003c\/strong\u003e The closed-back design on the 2504 fully insulates the live power terminals from the mounting surface, preventing accidental grounding or shorts against a metal panel or bulkhead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Blue Sea Systems 2504?\u003c\/strong\u003e The 2504 measures 3.25 inches (82.60 mm) in overall length with a mounting hole spacing of 2.81 inches (71.40 mm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 2504 terminal block weigh?\u003c\/strong\u003e The Blue Sea Systems 2504 weighs 0.17 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 2504 terminal block made from?\u003c\/strong\u003e The 2504 is made from plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs each screw pair on the 2504 electrically isolated?\u003c\/strong\u003e Yes, on the Blue Sea Systems 2504 each screw pair is one isolated circuit, keeping the 4 circuits electrically separate unless jumpered together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 2504 be used for both AC and DC wiring?\u003c\/strong\u003e Yes, the 2504 is rated for 30 Amps at 600 Volts AC\/DC, so it can be used on both AC and DC circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 2504 designed for surface mounting?\u003c\/strong\u003e Yes, the Blue Sea Systems 2504 is a surface-mount terminal block with a closed-back design that insulates it from the mounting surface.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989488546011,"sku":"BSS-2504","price":8.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2504.jpg?v=1784507382"},{"product_id":"blue-sea-systems-2356-water-resistant-100a-common-busbar-4-gang-with-cover-tin-plated-copper","title":"Blue Sea Systems 2356 Water-Resistant 4 Gang Common BusBar with Cover, 100A","description":"\u003cp\u003eThe Blue Sea Systems 2356 is a water-resistant 4 gang common bus bar built for consolidating positive distribution circuits or collecting negative and AC ground returns in a single, space-saving block. The buss and terminal clips are tin-plated copper C11000 for corrosion resistance, and the bus bar accepts standard ring or spade terminals so it wires up with ordinary hand tools rather than proprietary connectors. A single 1 x #10-32 terminal stud handles the incoming 8 AWG to 4 AWG feed, while four #8-32 terminal screws each accept 16 AWG to 10 AWG load wires, giving you four independent output circuits off one input.\u003c\/p\u003e\u003cp\u003eA snap-on cover keeps the terminals protected and includes storage for four write-on circuit labels so each connection can be identified at a glance. Three wire plugs are included to seal off any of the four load positions that are not in use, preserving the water-resistant rating when fewer than four wires are connected. The 2356 is designed to nest with the ST-Blade Water-Resistant Fuse Block (5056 or 5056100) and with other Water-Resistant 100A Common BusBars (2356 or 2356100) for a compact, stacked wiring layout.\u003c\/p\u003e\u003cp\u003eNote: the 2356 is not ABYC compliant and is not intended for marine applications; for marine installations use part number 2356100, the marine-rated version of this same bus bar.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2356\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Gangs\/Circuits:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 300 Volts AC \/ 48 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 100 Amps AC \/ 100 Amps DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBus Material:\u003c\/strong\u003e Tin-Plated Copper C11000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Stud:\u003c\/strong\u003e 1 x #10-32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Screws:\u003c\/strong\u003e 4 x #8-32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Size, Input:\u003c\/strong\u003e 8 AWG to 4 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Size, Load (each of 4 circuits):\u003c\/strong\u003e 16 AWG to 10 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Holes:\u003c\/strong\u003e Accepts 1\/4 inch (6mm) screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.42 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085023560\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e 4 write-on circuit labels, 3 wire plugs, cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eNests with the ST-Blade Water-Resistant Fuse Block (5056 or 5056100) and with other Water-Resistant 100A Common BusBars (2356 or 2356100). Accepts ATO\/ATC-style low profile fuses and circuit breakers, sold separately.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 2356 rated for marine use?\u003c\/strong\u003e No, the 2356 is not ABYC compliant and is not intended for marine applications. Blue Sea Systems makes part number 2356100, an ABYC-compliant version of this same bus bar, specifically for marine installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many circuits does the 2356 bus bar support?\u003c\/strong\u003e The 2356 is a 4 gang common bus bar, meaning it splits a single input into four independent output circuits from one water-resistant block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire sizes fit the 2356?\u003c\/strong\u003e The single input terminal stud on the 2356 accepts 8 AWG to 4 AWG wire, and each of the four load terminal screws accepts 16 AWG to 10 AWG wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the continuous amperage rating of the 2356?\u003c\/strong\u003e The Blue Sea Systems 2356 is rated for 100 amps AC\/100 amps DC continuous, with a maximum voltage of 300 volts AC \/ 48 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the bus bar made of?\u003c\/strong\u003e The 2356 uses a tin-plated copper C11000 buss and terminal clips, which resist corrosion in harsh electrical environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of terminals does the 2356 accept?\u003c\/strong\u003e The 2356 accepts standard ring or spade type terminals, allowing wiring with ordinary hand tools rather than a proprietary connector system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 2356 bus bar?\u003c\/strong\u003e Each 2356 ships with a protective cover, four write-on circuit labels for identifying each connection, and three wire plugs to seal unused load positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 2356 be stacked with other Blue Sea components?\u003c\/strong\u003e Yes, the 2356 nests with the ST-Blade Water-Resistant Fuse Block (5056 or 5056100) and with other Water-Resistant 100A Common BusBars (2356 or 2356100) for a compact, space-saving wiring layout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 2356 bus bar weigh?\u003c\/strong\u003e The Blue Sea Systems 2356 common bus bar weighs 0.42 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 2356 mounted?\u003c\/strong\u003e The 2356 has mounting holes that accept 1\/4 inch (6mm) screws for boat or ground mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 2356 and the 2356100?\u003c\/strong\u003e The 2356 and 2356100 share the same water-resistant 4 gang common bus bar design, but the 2356100 is the ABYC-compliant version intended for marine use, while the 2356 is not ABYC compliant and is not intended for marine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 2356 bus bar typically used for?\u003c\/strong\u003e The Blue Sea Systems 2356 is used for positive distribution wiring or for collecting negative or AC ground circuits into a single common connection point.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989488709851,"sku":"BSS-2356","price":43.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2356.jpg?v=1784507379"},{"product_id":"blue-sea-systems-2506-6-circuit-terminal-block-30a-600v-ac-dc-nickel-plated-brass-bus","title":"Blue Sea Systems 2506 Terminal Block, 6 Circuit, 30 Amp 600V AC\/DC Marine Bus Bar","description":"\u003cp\u003eThe Blue Sea Systems 2506 is a 6 circuit terminal block rated for 30 amps at 600 volts AC\/DC, built for organizing and distributing power connections on boats and other DC or AC electrical systems. Each pair of M4 (#8) screw terminals forms one electrically isolated circuit, so multiple independent connections can be mounted on a single block without cross-talk between circuits. The current-carrying bus is nickel-plated brass for durable, corrosion-resistant conductivity, while a closed-back housing fully insulates the live terminals from the mounting surface, allowing safe surface mounting to a panel, bulkhead, or enclosure without a separate insulating standoff.\u003c\/p\u003e\u003cp\u003eBecause each screw pair is isolated by design, the 2506 is often used simply as an organized set of independent connection points. For applications that require combining several of those isolated circuits into a common bus, Blue Sea Systems terminal block jumpers are available separately and are compatible with this terminal block as well as ST-Blade fuse blocks 5035 and 5037.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2506\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Circuits:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 30 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e 600 Volts AC\/DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Screw Size:\u003c\/strong\u003e M4 (#8)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 4.38 x 3.94 inches (111.20 x 100.00 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBus Material:\u003c\/strong\u003e Nickel-Plated Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Beige\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.21 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal terminal block for 12\/24V DC or AC marine and industrial electrical systems; not vehicle or engine specific.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many circuits does the Blue Sea Systems 2506 terminal block have?\u003c\/strong\u003e The 2506 terminal block has 6 independent circuits, with each screw pair forming its own isolated connection point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage and voltage rating of the 2506 terminal block?\u003c\/strong\u003e It is rated for 30 amps at 600 volts AC\/DC per circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size screws does the Blue Sea Systems 2506 use?\u003c\/strong\u003e Each terminal uses an M4 (#8) screw for making connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the circuits on the 2506 terminal block be combined into a common bus?\u003c\/strong\u003e Yes, Blue Sea Systems terminal block jumpers, sold separately, can be added to the 2506 to combine independent circuits into a common circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the jumpers for combining circuits included with the 2506 terminal block?\u003c\/strong\u003e No, the jumpers used to combine circuits on the 2506 are sold separately and are not included in the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Blue Sea Systems 2506 terminal block?\u003c\/strong\u003e The 2506 measures 4.38 x 3.94 inches (111.20 x 100.00 mm) overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 2506 terminal block weigh?\u003c\/strong\u003e It weighs 0.21 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the current-carrying bus on the 2506 made of?\u003c\/strong\u003e The bus material on the 2506 terminal block is nickel-plated brass for reliable, corrosion-resistant conductivity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 2506 terminal block safe to mount directly on a metal panel?\u003c\/strong\u003e Yes, the 2506 has a closed-back design that fully insulates the live power terminals from the mounting surface, so it can be surface mounted safely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs each circuit on the 2506 terminal block electrically isolated from the others?\u003c\/strong\u003e Yes, each screw pair on the 2506 forms one electrically isolated circuit unless jumpers are added to combine them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the terminal block housing color and material?\u003c\/strong\u003e The 2506 has a beige plastic housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 2506 suitable for both AC and DC circuits?\u003c\/strong\u003e Yes, the 2506 is rated for 30 amps at 600 volts for both AC and DC applications.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989489332443,"sku":"BSS-2506","price":11.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2506.jpg?v=1784507386"},{"product_id":"blue-sea-systems-2701-dualbus-plus-150a-common-busbar-5-x-8-32-screw-terminals-positive-and-negative-dc-power-distribution-block","title":"Blue Sea Systems 2701 DualBus Plus Common BusBar, 130A AC \/ 150A DC, 5-Terminal 8-32 Screw","description":"\u003cp\u003eThe Blue Sea Systems 2701 is a DualBus Plus common busbar that combines negative and positive buses on one block, giving boat owners a compact, organized way to distribute DC power to multiple circuits from a single mounting point. It is built for DC power distribution in boats, RVs, solar systems, and other mobile or off-grid electrical systems where several circuits need to share a common positive or negative connection point.\u003c\/p\u003e\u003cp\u003eEach busbar has 5 screw terminals sized for 8-32 screws, giving you five individual connection points on a single copper bus bar. A secure, clear polycarbonate cover snaps on easily over the terminals to meet ABYC insulation requirements, protecting connections from accidental contact and shorts while still allowing the terminals to be seen for inspection. Cover release buttons make it simple to remove the cover for wiring changes or maintenance without tools. One-piece stainless steel flange nuts are used at each terminal to ensure safe, secure, and corrosion-resistant connections over time.\u003c\/p\u003e\u003cp\u003eThe Blue Sea 2701 is rated for a continuous load of 130A AC \/ 150A DC, with a maximum operating voltage of 300V AC \/ 48V DC, making it suitable for higher-current DC distribution runs common in marine and off-grid battery systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2701\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e DualBus Plus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rating:\u003c\/strong\u003e 130A AC \/ 150A DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Operating Voltage:\u003c\/strong\u003e 300V AC \/ 48V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Terminals:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Screw Size:\u003c\/strong\u003e 8-32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.21 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085027018\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Blue Sea Systems 2701 used for?\u003c\/strong\u003e The Blue Sea 2701 DualBus Plus common busbar is used to distribute DC power to multiple circuits in boats, RVs, solar systems, and other mobile or off-grid electrical setups by combining negative and positive buses on a single block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does the 2701 busbar have?\u003c\/strong\u003e The Blue Sea 2701 has 5 screw terminals, each sized for an 8-32 screw.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the continuous amperage rating of the 2701?\u003c\/strong\u003e It is rated for a continuous 130A AC \/ 150A DC load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum operating voltage of the Blue Sea 2701?\u003c\/strong\u003e The maximum operating voltage is 300V AC \/ 48V DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 2701 busbar meet ABYC insulation requirements?\u003c\/strong\u003e Yes, the Blue Sea 2701 has a secure, clear polycarbonate cover that snaps on easily to meet ABYC insulation requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Blue Sea 2701 busbar made of?\u003c\/strong\u003e The bus bar itself is copper, with a black polycarbonate protective cover over the terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you remove the cover on the 2701 busbar for wiring?\u003c\/strong\u003e Cover release buttons on the Blue Sea 2701 let you remove the polycarbonate cover without tools for wiring or maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware secures wire connections on the 2701?\u003c\/strong\u003e One-piece stainless steel flange nuts are used at each terminal on the Blue Sea 2701 to ensure safe, secure connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea 2701 weigh?\u003c\/strong\u003e The Blue Sea Systems 2701 busbar weighs 0.21 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 2701 combine both positive and negative circuits on one block?\u003c\/strong\u003e Yes, the Blue Sea 2701 DualBus Plus design combines negative and positive buses on a single common busbar block.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989489397979,"sku":"BSS-2701","price":25.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2701.jpg?v=1784506991"},{"product_id":"blue-sea-systems-2702-dualbus-plus-150a-common-busbar-combined-positive-and-negative-bus-with-cover","title":"Blue Sea Systems 2702 DualBus Plus Common BusBar, Positive and Negative, 150A DC","description":"\u003cp\u003eThe Blue Sea Systems 2702 is a DualBus Plus common busbar that combines both the positive and negative connection points on a single mounting block, replacing the need for two separate busbars in a DC electrical panel. It is built for a continuous rating of 130 Amps AC \/ 150 Amps DC with a maximum operating voltage of 300 Volts AC \/ 48 Volts DC, making it suitable for consolidating multiple circuit connections at a central distribution point. The busbar provides 10 screw terminals sized for 8-32 hardware, giving installers room to land up to 10 individual positive and negative circuit connections in one compact footprint.\u003c\/p\u003e\u003cp\u003eA secure, clear polycarbonate cover snaps on easily over the terminals to meet ABYC insulation requirements, protecting against accidental contact while keeping the wiring visible for inspection. Cover release buttons allow the cover to be removed for maintenance and popped back into place afterward. Connections are made with one-piece stainless steel flange nuts, chosen to ensure safe, secure, and corrosion-resistant terminations in a marine electrical environment. The 2702 is panel mounted and is UL listed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2702\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating (Continuous):\u003c\/strong\u003e 130 Amps AC \/ 150 Amps DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating (Max. Operating):\u003c\/strong\u003e 300 Volts AC \/ 48 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Terminals:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Screw Size:\u003c\/strong\u003e 8-32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Hardware:\u003c\/strong\u003e Stainless steel flange nuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5.06 inches wide x 0.58 inches high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e UL Listed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085027025\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of the Blue Sea Systems 2702 DualBus busbar?\u003c\/strong\u003e The 2702 DualBus busbar is rated for a continuous 130 Amps AC \/ 150 Amps DC, with a maximum operating voltage of 300 Volts AC \/ 48 Volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 2702 combine both positive and negative connections?\u003c\/strong\u003e Yes, the Blue Sea Systems 2702 DualBus Plus combines negative and positive buses on a single common block instead of requiring two separate busbars.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does the 2702 busbar have?\u003c\/strong\u003e 10 screw terminals sized for 8-32 hardware are provided on the Blue Sea Systems 2702 DualBus, allowing up to 10 circuit connections per polarity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 2702 busbar?\u003c\/strong\u003e The Blue Sea Systems 2702 ships with a snap-on clear polycarbonate cover and one-piece stainless steel flange nuts for the terminal connections, and it is available in a package quantity of 5 units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 2702 busbar meet ABYC insulation requirements?\u003c\/strong\u003e Yes, the clear polycarbonate cover on the 2702 DualBus snaps on easily and is designed to meet ABYC insulation requirements for exposed electrical terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 2702 busbar?\u003c\/strong\u003e Product dimensions for the Blue Sea Systems 2702 are 5.06 inches wide by 0.58 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 2702 busbar weigh?\u003c\/strong\u003e The Blue Sea Systems 2702 DualBus busbar weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 2702 busbar UL listed?\u003c\/strong\u003e Yes, the 2702 DualBus common busbar carries UL certification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the terminal hardware on the 2702 made from?\u003c\/strong\u003e One-piece stainless steel flange nuts are used on the 2702 DualBus terminals to ensure safe, secure, and corrosion-resistant connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 2702 busbar mounted?\u003c\/strong\u003e Panel mounting is used for the Blue Sea Systems 2702 DualBus, letting it be secured directly to an electrical panel or bulkhead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the polycarbonate cover on the 2702 be removed for maintenance?\u003c\/strong\u003e Yes, the 2702's cover features release buttons that let it be popped off for access to the terminals, then snapped back into place.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989489692891,"sku":"BSS-2702","price":26.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2702.jpg?v=1784507389"},{"product_id":"blue-sea-systems-2722-dualbus-plus-150a-common-busbar-with-1-4-20-stud-and-5-x-10-32-screw-terminals","title":"Blue Sea Systems 2722 DualBus Plus Common BusBar, 150A, 5 x #10-32 Screw \/ 2 x 1\/4-20 Stud Terminals","description":"\u003cp\u003eThe Blue Sea Systems 2722 is a DualBus Plus common busbar rated for 150 amps, built to combine negative or AC ground circuit collection and positive distribution on a single block. Each bus provides 5 terminal positions for #10-32 screw terminals plus 2 positions for 1\/4\"-20 stud terminals, giving installers a mix of screw and stud connection points for wiring runs of different gauges and lug styles.\u003c\/p\u003e\u003cp\u003eThe studs are insert-molded stainless steel, which eliminates the need for separate securing nuts and allows high torquing for a solid, low-resistance electrical connection. A one-piece serrated flange nut is used on the stud terminals to ensure the connection stays correct and secure under vibration. A clear polycarbonate cover snaps on over the terminals, helping the installation meet Coast Guard and ABYC insulation requirements while still allowing visual inspection of the connections.\u003c\/p\u003e\u003cp\u003eThis busbar is intended for positive distribution or for collecting negative and AC ground circuits at a single point, making panel and engine-compartment wiring cleaner and easier to service.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2722\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Screws:\u003c\/strong\u003e 5 per bus x #10-32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Studs:\u003c\/strong\u003e 2 per bus x 1\/4\"-20 Stud\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 150 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Poles:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e 300 Volts, 48 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e DIN Rail Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover Color:\u003c\/strong\u003e Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polycarbonate cover, insert-molded stainless steel studs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards Met:\u003c\/strong\u003e ABYC, US Coast Guard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.66 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085027223\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of the Blue Sea 2722 busbar?\u003c\/strong\u003e The Blue Sea Systems 2722 DualBus Plus busbar is rated for 150 amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminal positions does the 2722 have?\u003c\/strong\u003e Each bus on the 2722 has 5 positions for #10-32 screw terminals and 2 positions for 1\/4\"-20 stud terminals, for a total of 5 poles per bus.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size studs does the 2722 use?\u003c\/strong\u003e The 2722 uses 1\/4\"-20 studs; a version with 5\/16\"-18 studs is offered as a separate part number (2723) if a larger stud size is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need separate nuts for the stud terminals?\u003c\/strong\u003e No. The studs on the 2722 are insert-molded stainless steel with a one-piece serrated flange nut, so no separate securing nut is required and high torque can be applied for a secure connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this busbar used for?\u003c\/strong\u003e The 2722 is used for positive distribution or for collecting negative and AC ground circuits at a single point on a boat's electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 2722 have a protective cover?\u003c\/strong\u003e Yes, a clear polycarbonate cover snaps onto the 2722 and is designed to meet Coast Guard and ABYC insulation requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the color of the 2722 busbar?\u003c\/strong\u003e The 2722 has a yellow cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea 2722 weigh?\u003c\/strong\u003e The Blue Sea Systems 2722 busbar weighs 0.66 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the 2722 rated for?\u003c\/strong\u003e The 2722 is rated for 300 Volts and 48 Volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 2722 DIN rail mountable?\u003c\/strong\u003e Yes, the 2722 uses a DIN rail mounting type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat standards does the 2722 meet?\u003c\/strong\u003e The 2722 is designed to meet ABYC and US Coast Guard insulation requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 2722 and the 2723?\u003c\/strong\u003e Both are 150A common busbars with 5 per bus x #10-32 screw terminals, but the 2722 uses 2 per bus x 1\/4\"-20 studs while the 2723 uses 2 per bus x 5\/16\"-18 studs.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989489791195,"sku":"BSS-2722","price":35.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2722.jpg?v=1784506997"},{"product_id":"blue-sea-systems-4010-cablecap-insulating-stud-cover-8-to-4-cable-red","title":"Blue Sea Systems 4010 CableCap Stud Terminal Insulator, Red, Fits 8-6-4 AWG Cable","description":"\u003cp\u003eThe Blue Sea Systems 4010 CableCap is a stud-type terminal insulator designed to cover and protect exposed stud connections on high-amperage electrical devices. It is used to insulate stud terminals on alternators, starters, windlasses, and other high amperage devices, reducing the risk of accidental shorts from stray tools or adjacent conductors around an exposed connection.\u003c\/p\u003e\u003cp\u003eThe CableCap is sized for stud diameters from 0.70 to 0.30 inch and accommodates 8, 6, and 4 AWG cable, making it a fit for a range of common high-amperage wiring runs found in marine electrical systems. It is finished in red for easy circuit identification at a glance. The cap measures 5 inches long by 3 inches wide by 1 inch high and weighs 0.05 pounds, and is supplied as a single unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Size:\u003c\/strong\u003e 8 AWG, 6 AWG, 4 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Diameter:\u003c\/strong\u003e 0.70 to 0.30 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5 inches L x 3 inches W x 1 inch H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085040109\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Blue Sea Systems 4010 CableCap used for?\u003c\/strong\u003e The Blue Sea Systems 4010 CableCap insulates stud-type connectors on alternators, starters, windlasses, and other high amperage devices to help prevent accidental shorts at the terminal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cable sizes fit the 4010 CableCap?\u003c\/strong\u003e The 4010 CableCap is sized for 8, 6, and 4 AWG cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat stud diameter does the Blue Sea Systems 4010 CableCap accommodate?\u003c\/strong\u003e It fits stud diameters from 0.70 to 0.30 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 4010 CableCap?\u003c\/strong\u003e The Blue Sea Systems 4010 CableCap is red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Blue Sea Systems 4010 CableCap?\u003c\/strong\u003e The CableCap measures 5 inches long by 3 inches wide by 1 inch high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 4010 CableCap weigh?\u003c\/strong\u003e The Blue Sea Systems 4010 CableCap weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Blue Sea Systems 4010 CableCap?\u003c\/strong\u003e The UPC for part number 4010 is 632085040109.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 4010 CableCap be used on a windlass or starter connection?\u003c\/strong\u003e Yes, the Blue Sea Systems 4010 CableCap is designed to insulate stud connectors on windlasses, starters, and alternators, among other high amperage devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many CableCaps are included with part number 4010?\u003c\/strong\u003e The Blue Sea Systems 4010 CableCap is supplied as a single unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 4010 CableCap a genuine Blue Sea Systems part?\u003c\/strong\u003e Yes, part number 4010 is a Blue Sea Systems CableCap stud terminal insulator.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989490577627,"sku":"BSS-4010","price":3.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4010.jpg?v=1784507004"},{"product_id":"blue-sea-systems-4011-cablecap-stud-insulator-8-4-awg-black-2-pack","title":"Blue Sea Systems 4011 CableCap Stud Insulator, Black, 8-4 AWG, 2-Pack","description":"\u003cp\u003eThe Blue Sea Systems 4011 CableCap Stud Insulator is a black insulating cap designed to cover stud-type connectors on high-amperage marine electrical equipment. It insulates studs on alternators, starters, windlasses, and other high amperage devices, helping to prevent accidental shorts from a stray tool or cable contacting a live stud terminal. Sized for 8 AWG to 4 AWG cable, the 4011 slips over the connection point to shield the exposed metal while keeping the terminal accessible for service.\u003c\/p\u003e\u003cp\u003eEach package contains 2 insulator caps, making it easy to cover a matched pair of connections in one purchase. The black color allows it to be used for negative or ground-side connections, and Blue Sea Systems also offers the same 8-4 AWG size in red (part number 4010) for color-coding positive connections. At just 0.05 pounds, the 4011 is a lightweight, low-cost addition to any 12-volt or 24-volt marine electrical installation where stud connectors are used.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4011\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Size (AWG):\u003c\/strong\u003e 8-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat cable size does the Blue Sea Systems 4011 fit?\u003c\/strong\u003e The 4011 CableCap Stud Insulator is sized for 8 AWG to 4 AWG cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many insulators come in a package?\u003c\/strong\u003e The 4011 is sold as a retail pack of 2 insulator caps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this insulator used for?\u003c\/strong\u003e It insulates stud-type connectors on alternators, starters, windlasses, and other high amperage devices to help prevent accidental shorts at the terminal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 4011?\u003c\/strong\u003e Part number 4011 is black, making it suited for negative or ground-side stud connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a red version for positive connections?\u003c\/strong\u003e Yes, Blue Sea Systems offers the same 8-4 AWG cable size in red as part number 4010, letting you color-code positive and negative studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 4011 insulator weigh?\u003c\/strong\u003e The Blue Sea Systems 4011 weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 4011 a genuine Blue Sea Systems part?\u003c\/strong\u003e Yes, 4011 is the manufacturer part number for this genuine Blue Sea Systems CableCap Stud Insulator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does the CableCap insulator install?\u003c\/strong\u003e It fits over stud-type electrical connectors, such as those found on alternators, starters, and windlasses, to insulate the exposed terminal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 4011 fit larger cable like 2\/0 or 4\/0?\u003c\/strong\u003e No, the 4011 is sized for 8-4 AWG cable; Blue Sea Systems offers larger sizes such as 2-2\/0 AWG and 3\/0-4\/0 AWG under different part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 4011?\u003c\/strong\u003e Ordering part number 4011 gets you a retail pack of 2 black stud insulator caps sized for 8-4 AWG cable.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989490872539,"sku":"BSS-4011","price":3.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4011.jpg?v=1784507008"},{"product_id":"blue-sea-systems-9217-jumper-terminal-for-2500-series-fuse-blocks-brass-bus-jumper-2-pack","title":"Blue Sea Systems 9217 Jumper Terminal, 2500 Series, Brass DIN Rail Fuse Block Jumpers","description":"\u003cp\u003eThe Blue Sea Systems 9217 Jumper Terminal is a brass, screw-type jumper strip built for the 2500 Series DIN rail fuse block system. It links adjacent positions on a 2500 Series block so a single circuit source can feed multiple fuse positions without running separate jumper wires between each one, simplifying panel wiring and keeping DIN rail fuse blocks tidy.\u003c\/p\u003e\u003cp\u003eEach 9217 jumper terminal is a 10-position, 4-pole unit with screw connectors that clamp directly onto the terminal block contacts. The part includes two terminal block jumpers, so a single purchase covers a full jumper set for one block; an optional two-pack (part number 92175037) is available separately for installations that need additional jumpers. The terminal meets IEC and UL specification requirements and is constructed of brass for reliable electrical contact and corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003eBecause it is a DIN rail mount accessory sized specifically for the 2500 Series fuse block family, the 9217 is intended to be paired with Blue Sea Systems 2500 Series blocks rather than used as a standalone connector.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9217\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Jumper Terminal - 2500 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Contacts:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Poles:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e DIN Rail Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification Met:\u003c\/strong\u003e IEC, UL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Two terminal block jumpers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 5.17 inches (131.32 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 38.57 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Accessory:\u003c\/strong\u003e Two-pack available, part number 92175037\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Blue Sea Systems 9217 jumper terminal used for?\u003c\/strong\u003e The 9217 jumper terminal links adjacent positions on a Blue Sea Systems 2500 Series DIN rail fuse block, letting one circuit source feed multiple fuse positions without separate jumper wires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many jumpers come with part number 9217?\u003c\/strong\u003e Two terminal block jumpers are included with the Blue Sea Systems 9217, enough to jumper one 2500 Series fuse block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a larger pack of these jumpers available?\u003c\/strong\u003e Yes, Blue Sea Systems offers an optional two-pack of jumper terminals under part number 92175037 for installations needing additional jumpers beyond the two included with the 9217.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 9217 jumper terminal made of?\u003c\/strong\u003e It is made of brass, which provides reliable electrical contact and corrosion resistance for the Blue Sea Systems 2500 Series jumper terminal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many positions and poles does the 9217 jumper terminal have?\u003c\/strong\u003e The Blue Sea Systems 9217 is a 10-position, 4-pole jumper terminal with screw-type connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 9217 jumper terminal?\u003c\/strong\u003e The Blue Sea Systems 9217 measures 5.17 inches (131.32 mm) in length and 38.57 mm across, and weighs 0.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 9217 jumper terminal fit any DIN rail fuse block?\u003c\/strong\u003e The 9217 is sized specifically for Blue Sea Systems 2500 Series DIN rail fuse blocks and is intended to be used with that block family.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connector type does the 9217 jumper terminal use?\u003c\/strong\u003e The Blue Sea Systems 9217 uses screw-type connectors to clamp onto the 2500 Series fuse block terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 9217 jumper terminal meet any electrical standards?\u003c\/strong\u003e Yes, the Blue Sea Systems 9217 jumper terminal meets IEC and UL specification requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 9217 and the 92175037 part?\u003c\/strong\u003e The 9217 includes two terminal block jumpers as a standard set, while 92175037 is a separate, optional two-pack of jumper terminals for buyers who need more jumpers than the 9217 provides.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989523837147,"sku":"BSS-9217","price":4.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/9217.jpg?v=1784507725"},{"product_id":"perko-1190dp0chr-watertight-deck-connector-with-cap-chrome-plated-zinc-1-5-8-diameter-15a-polarized","title":"Perko 1190DP0CHR Chrome-Plated Zinc Watertight Deck Connector, 1-5\/8 Inch Diameter","description":"\u003cp\u003eThe Perko 1190DP0CHR is a watertight deck connector built to pass electrical current through a boat's deck or bulkhead without letting water into the cabin or compartment below. It is a polarized, double-contact connector rated for 15 amps at 12, 24, or 32 volts, making it suitable for common marine DC electrical runs such as trailer lighting hookups, dockside power leads, and other deck-through wiring applications. The connector body is chrome-plated zinc for corrosion resistance in a saltwater environment, and it includes a flange gasket at the base along with an integral waterproof cap that seals the fitting when the mating plug is removed, keeping the through-deck opening protected from spray and rain when not in use.\u003c\/p\u003e\u003cp\u003eThe unit measures 1-5\/8 inches in diameter and 1-3\/16 inches in height, with a number 4 screw size for mounting. Because the connector is polarized, the plug and socket mate in only one orientation, preventing reversed-polarity connections. This part is sold as the connector fitting itself and is intended as a direct fit wherever a Perko 1190DP0CHR watertight deck connector is specified.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1190DP0CHR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chrome-Plated Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 1-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Size:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Rating:\u003c\/strong\u003e 15 Amps at 12, 24, and 32 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Polarized, Double Contact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Screw-In\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Integral Waterproof Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 1190DP0CHR used for?\u003c\/strong\u003e It is a watertight deck connector that lets a wire pass through a boat's deck or bulkhead while keeping water out, commonly used for trailer light hookups and other deck-through 12, 24, or 32 volt DC wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1190DP0CHR polarized?\u003c\/strong\u003e Yes, the Perko 1190DP0CHR is a polarized, double-contact connector, so the plug and socket only mate in one orientation, preventing a reversed-polarity connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage and voltage is this connector rated for?\u003c\/strong\u003e The 1190DP0CHR is rated for 15 amps at 12, 24, and 32 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 1190DP0CHR?\u003c\/strong\u003e The connector is 1-5\/8 inches in diameter and 1-3\/16 inches in height, with a number 4 screw size for mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the connector stay watertight when unplugged?\u003c\/strong\u003e Yes. The 1190DP0CHR has an integral waterproof cap that seals the base when the mating plug is removed, along with a flange gasket at the base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 1190DP0CHR made from?\u003c\/strong\u003e It is made of chrome-plated zinc for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Perko 1190DP0CHR weigh?\u003c\/strong\u003e The 1190DP0CHR weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 1190DP0CHR installed?\u003c\/strong\u003e It is a screw-in installation type, mounting through the deck or bulkhead with number 4 screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 1190DP0CHR?\u003c\/strong\u003e The 1190DP0CHR is black with a chrome-plated finish on its zinc body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1190DP0CHR include a cap?\u003c\/strong\u003e Yes, an integral waterproof cap is built into the connector to seal the opening when the plug is disconnected.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991120621787,"sku":"PKO-1190DP0CHR","price":40.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-1190DP0CHR__78110.1722514844.500.750.jpg?v=1785189220"},{"product_id":"star-brite-liquid-electrical-tape-black-4-oz-can-waterproof-uv-resistant-dielectric-sealant-for-marine-wiring-terminals-splices","title":"Star Brite Liquid Electrical Tape 4 oz Black Waterproof Dielectric Sealant 084104B","description":"\u003cp\u003eStar Brite Liquid Electrical Tape (part number 084104B) is a brush-on liquid sealant that cures into a flexible, airtight, waterproof coating over wires, cables, terminals, and electrical splices. Unlike wrap-style tape, the liquid formula flows into gaps and irregular shapes, then dries to a dielectric barrier that resists water intrusion, UV exposure, vibration, and general wear. It is formulated to adhere to metal, plastic, vinyl, rubber, and composite surfaces, making it suitable for marine, automotive, and household electrical repairs.\u003c\/p\u003e\u003cp\u003eThe 4 oz can includes an attached brush applicator for controlled, mess-free coverage over splices, frayed cable ends, and terminal connections. Once cured, the coating remains flexible rather than becoming brittle, and it is rated to withstand temperatures up to 275 degrees Fahrenheit. This makes it well suited to engine compartments, bilge wiring, trailer wiring, and other exposed electrical connections where standard tape can peel or let in moisture.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Star brite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 084104B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 84104\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 4 oz can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic (container)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1 inch L x 3 inch W x 1 inch thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.34 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper Temperature Rating:\u003c\/strong\u003e 275 degrees Fahrenheit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Surfaces:\u003c\/strong\u003e Metal, plastic, rubber, vinyl, composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 071247841046\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Star Brite Liquid Electrical Tape used for?\u003c\/strong\u003e Star Brite Liquid Electrical Tape (084104B) is a brush-on liquid sealant used to create a waterproof, dielectric coating over wire splices, frayed cable ends, and electrical terminals in marine, automotive, and household applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this liquid tape waterproof?\u003c\/strong\u003e Yes, once cured it forms an airtight, waterproof, UV-resistant coating over the sealed connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is liquid electrical tape applied?\u003c\/strong\u003e The 4 oz can of 084104B includes an attached brush applicator, so you brush the liquid directly onto the wire, splice, or terminal and let it dry rather than wrapping tape around it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can this coating withstand?\u003c\/strong\u003e The cured coating on this Star Brite liquid tape is rated to withstand temperatures up to 275 degrees Fahrenheit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces does it adhere to?\u003c\/strong\u003e It adheres to metal, plastic, vinyl, rubber, and composite surfaces, which covers most wire insulation and terminal materials found on boats and vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the coating stay flexible after it dries?\u003c\/strong\u003e Yes, 084104B remains flexible after curing instead of becoming brittle, which helps it resist cracking from vibration and repeated flexing of the wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size can does this come in?\u003c\/strong\u003e This product is sold as a 4 oz can, item 084104B, in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this replace standard electrical tape?\u003c\/strong\u003e For sealing splices and terminals, this liquid formula flows into gaps and irregular shapes that wrap tape cannot cover, giving a more complete waterproof seal on connections exposed to moisture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this liquid electrical tape suitable for marine wiring?\u003c\/strong\u003e Yes, it is designed for marine, automotive, and household electrical applications and provides a waterproof, dielectric seal suited to boat wiring exposed to moisture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this product conduct electricity?\u003c\/strong\u003e No, 084104B cures into a dielectric coating, meaning it insulates rather than conducts, which is why it is safe to use over bare splices and terminals.\u003c\/p\u003e","brand":"Star brite","offers":[{"title":"Default Title","offer_id":48991695634651,"sku":"STR-84104","price":10.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71SSo7roBvL.jpg?v=1784510045"},{"product_id":"star-brite-liquid-electrical-tape-black-1-oz-tube-waterproof-uv-resistant-sealant","title":"Star brite Liquid Electrical Tape, Black 1 oz Tube, Waterproof UV-Resistant Sealant","description":"\u003cp\u003eStar brite Liquid Electrical Tape is a brush-on\/flow-on sealant that creates an airtight, waterproof, UV-resistant coating over electrical connections and wires. It is designed for bilge pumps, outdoor wiring, marine applications, and small electronics repairs, making it a go-to fix for splices, frayed cables, and exposed terminals that need protection from moisture and the elements. The flexible coating remains pliable after it cures, so it will not crack or split the way traditional tape can when wires flex or vibrate, and it withstands temperatures from -50 degrees Fahrenheit to +275 degrees Fahrenheit while providing superior dielectric protection against electrical current leakage.\u003c\/p\u003e\u003cp\u003eThe formula bonds to metal, plastic, and rubber and comes in a 1 ounce tube with an integrated precision applicator tip, allowing exact application directly onto the connection without extra tools or brushes. Because it dries to a black, flexible seal, it blends in cleanly on most wires and cables rather than leaving a bulky wrap. It is suited for boats, cars, laptops, phone charging cables, holiday light displays, and any DIY electrical repair where a traditional tape wrap will not hold up to water or sun exposure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Star brite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 84154\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Liquid Electrical Tape\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size:\u003c\/strong\u003e 1 oz tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplicator:\u003c\/strong\u003e Integrated precision applicator tip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic (cured coating)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Surfaces:\u003c\/strong\u003e Metal, plastic, rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Resistance:\u003c\/strong\u003e UV-resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e -50 degrees Fahrenheit to +275 degrees Fahrenheit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDielectric Protection:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 1 inch L x 3 inch W x 1 inch thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Star brite Liquid Electrical Tape used for?\u003c\/strong\u003e Star brite Liquid Electrical Tape (part number 84154) is a brush-on sealant that creates an airtight, waterproof, UV-resistant coating over electrical connections and wires, commonly used on bilge pumps, outdoor wiring, marine wiring, and small electronics repairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this liquid electrical tape actually waterproof?\u003c\/strong\u003e Yes, the cured coating on the Star brite 84154 tube is rated waterproof and also provides dielectric protection against electrical current leakage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can this coating withstand?\u003c\/strong\u003e The Star brite Liquid Electrical Tape (84154) withstands temperatures from -50 degrees Fahrenheit to +275 degrees Fahrenheit once cured.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces does Star brite Liquid Electrical Tape bond to?\u003c\/strong\u003e It bonds to metal, plastic, and rubber, making the 84154 tube suitable for wire splices, terminals, and connections made from those materials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much product is in one tube?\u003c\/strong\u003e Each Star brite 84154 tube contains 1 ounce of liquid electrical tape.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you apply it?\u003c\/strong\u003e The 84154 tube has an integrated precision applicator tip, so the liquid electrical tape can be brushed or flowed directly onto the connection without a separate brush or tool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does it dry?\u003c\/strong\u003e Star brite Liquid Electrical Tape 84154 is black and dries to a flexible black coating that blends in on most wires and cables.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the coating stay flexible after it dries, or does it crack like regular tape?\u003c\/strong\u003e It remains flexible after curing, so the Star brite 84154 coating resists cracking or splitting from vibration and wear in ways a traditional wrapped tape can fail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be used for automotive or household electrical repairs, or only marine?\u003c\/strong\u003e Star brite Liquid Electrical Tape (84154) is designed for marine applications but is also suited to automotive, RV, and household electrical repairs such as splices, frayed cables, and small electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 84154 tube weigh?\u003c\/strong\u003e The Star brite Liquid Electrical Tape 1 oz tube (84154) weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the tube?\u003c\/strong\u003e The Star brite 84154 tube measures 1 inch long by 3 inches wide by 1 inch thick.\u003c\/p\u003e","brand":"Star brite","offers":[{"title":"Default Title","offer_id":49017539920091,"sku":"STR-84154","price":8.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/84134.A1_e5c71c55-72d9-46fe-853f-94111187b8a9.jpg?v=1784937406"},{"product_id":"sea-sense-338-piece-marine-electrical-connector-kit-for-12-24-volt-systems","title":"Sea Sense 338 Piece Marine Electrical Connector Kit for 12\/24 Volt Systems","description":"\u003cp\u003eThe Sea Sense 338 Piece Marine Electrical Connector Kit (part number 50031121) is a complete assortment of connectors, terminals, wire ties, heat shrink tubing, and cable clamps sized for professional-grade repairs or new installations on any 12\/24 volt marine electrical system. Rather than buying individual packs of terminals and hoping you have the right gauge and style on hand, this kit puts a full working supply of butt connectors, ring connectors, flanged spade connectors, and male\/female disconnects into one case, covering both 16-14 gauge and 12-10 gauge wire.\u003c\/p\u003e\u003cp\u003eEvery connector and terminal is built for the demands of a marine environment, and the kit pairs heat shrink tubing with the ring and butt connectors so finished splices can be sealed against moisture rather than left as bare crimped joints. Ring connectors are included in both 1\/4 inch and 3\/8 inch stud sizes, giving you the flexibility to land wires on a range of terminal blocks, switches, and battery posts. Cable clamps in 1\/4 inch and 1\/2 inch sizes are also included for securing wiring runs, along with 4 inch wire ties to keep bundles neat and strain-relieved.\u003c\/p\u003e\u003cp\u003eThis kit is intended for general 12 volt and 24 volt electrical work throughout a boat: rewiring accessories, replacing corroded terminals, extending circuits, or building out a new panel. Because it is a universal assortment rather than a fitment-specific part, it is not tied to a particular engine, make, or model.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea Sense\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 50031121\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Pieces:\u003c\/strong\u003e 338\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Voltage:\u003c\/strong\u003e 12\/24 Volt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 24 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Types Included:\u003c\/strong\u003e Butt connectors, ring connectors, flanged spade connectors, male disconnects, female disconnects\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauges Covered:\u003c\/strong\u003e 16-14 AWG and 12-10 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRing Connector Stud Sizes:\u003c\/strong\u003e 1\/4 inch and 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional Contents:\u003c\/strong\u003e 4 inch wire ties, heat shrink tubing (1\/4 inch and 3\/8 inch), cable clamps (1\/4 inch and 1\/2 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation Material:\u003c\/strong\u003e Polyvinyl chloride (PVC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 737765311217\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Marine Electrical Connectors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces are in the Sea Sense 50031121 electrical kit?\u003c\/strong\u003e The kit contains 338 total pieces, including butt connectors, ring connectors, flanged spade connectors, male and female disconnects, wire ties, heat shrink tubing, and cable clamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire gauges does this kit cover?\u003c\/strong\u003e Sea Sense kit 50031121 covers both 16-14 AWG and 12-10 AWG wire, so it handles most light-to-medium gauge wiring found on a boat's 12\/24 volt circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit rated for 12 volt or 24 volt systems?\u003c\/strong\u003e It is designed for 12\/24 volt marine electrical systems, with a maximum voltage rating of 24 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include heat shrink tubing for waterproofing connections?\u003c\/strong\u003e Yes, heat shrink tubing in both 1\/4 inch and 3\/8 inch sizes is included alongside the connectors in the Sea Sense 50031121 kit, allowing splices to be sealed against moisture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat ring connector sizes are included?\u003c\/strong\u003e Ring connectors are included in both 1\/4 inch and 3\/8 inch stud sizes, covering common terminal block, switch, and battery post connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used for a full boat rewiring project?\u003c\/strong\u003e With 338 pieces spanning butt connectors, ring connectors, spade connectors, disconnects, wire ties, shrink tubing, and cable clamps, the 50031121 kit is sized for a full rewiring job or a series of smaller electrical repairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the connectors insulated with?\u003c\/strong\u003e The connectors in this kit use polyvinyl chloride (PVC) insulation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre cable clamps included in this kit?\u003c\/strong\u003e Yes, the Sea Sense 50031121 kit includes cable clamps in 1\/4 inch and 1\/2 inch sizes for securing wiring runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include male and female disconnects?\u003c\/strong\u003e Yes, both male disconnects and female disconnects are included in the 338 piece assortment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit specific to a certain boat make or engine?\u003c\/strong\u003e No, the Sea Sense 50031121 kit is a universal electrical connector assortment and is not tied to a specific make, model, or engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the kit weigh?\u003c\/strong\u003e The Sea Sense 338 piece electrical kit (50031121) weighs 1.14 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire ties are included with the kit?\u003c\/strong\u003e 4 inch wire ties are included in the kit for bundling and securing wiring runs alongside the connectors and terminals.\u003c\/p\u003e","brand":"Sea Sense","offers":[{"title":"Default Title","offer_id":49026475294939,"sku":"S-S-50031121","price":32.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/50031121.png?v=1785027434"},{"product_id":"seasense-electrical-vinyl-tape-3-pack-red-black-and-green-12-feet-per-spool","title":"SeaSense Electrical Vinyl Tape, 3-Pack Red, Black, and Green, 12 Feet Per Spool","description":"\u003cp\u003eThis SeaSense Electrical Vinyl Tape set includes three 12 foot spools in red, black, and green, giving you the color-coded tape needed to keep any boat wiring job organized and code-compliant. Each spool is made of vinyl and is waterproof, making it suitable for marine electrical work as well as general household and industrial use. The tape is UL Listed and is designed for insulating wire splices, wrapping harnesses, and general electrical maintenance across phases, circuits, feeders, and branches.\u003c\/p\u003e\u003cp\u003eColor-coding your wiring with red, black, and green tape helps you and anyone else working on the boat quickly identify positive, negative, and ground connections, reducing the chance of a miswired circuit. With 12 feet of tape on each of the three spools, this pack provides enough material for multiple splices and repair jobs around the boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaSense\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 50031101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Electrical Tape\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Spools:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors:\u003c\/strong\u003e Red, Black, Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Per Spool:\u003c\/strong\u003e 12 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e 600 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e UL Listed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many spools come in the SeaSense Electrical Vinyl Tape pack?\u003c\/strong\u003e This pack (part number 50031101) includes 3 spools of vinyl electrical tape: one red, one black, and one green.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is each spool of tape?\u003c\/strong\u003e Each of the three spools in the SeaSense 50031101 set is 12 feet long, for a total of 36 feet of tape across the pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this tape waterproof?\u003c\/strong\u003e Yes, the SeaSense vinyl electrical tape (50031101) is waterproof, which makes it suitable for marine wiring applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is this electrical tape rated for?\u003c\/strong\u003e The SeaSense 50031101 electrical tape carries a 600 volt rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the tape made from?\u003c\/strong\u003e The tape spools in this SeaSense set are made of vinyl.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this tape UL Listed?\u003c\/strong\u003e Yes, the SeaSense Electrical Vinyl Tape 3-pack (50031101) is UL Listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the tape used for?\u003c\/strong\u003e This tape is used for insulating wire splices, wrapping wire harnesses, and general electrical maintenance on circuits, phases, feeders, and branches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are the three tape colors different?\u003c\/strong\u003e The red, black, and green spools in the SeaSense 50031101 set let you color-code boat wiring, so positive, negative, and ground connections can be identified at a glance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this tape set weigh?\u003c\/strong\u003e The SeaSense Electrical Vinyl Tape 3-pack (50031101) weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The box contains three 12 foot spools of vinyl electrical tape in red, black, and green under part number 50031101.\u003c\/p\u003e","brand":"Sea Sense","offers":[{"title":"Default Title","offer_id":49026475393243,"sku":"S-S-50031101","price":2.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/50031101.jpg?v=1785027432"},{"product_id":"cdi-electronics-911-9900-amphenol-connector-kit-for-cdi-511-9900","title":"CDI Electronics 911-9900 Amphenol Connector Kit for CDI 511-9900","description":"\u003cp\u003eThe CDI Electronics 911-9900 Amphenol Connector Kit is a replacement connector kit designed for use with CDI part number 511-9900. It provides the Amphenol-style connector components needed to service or restore the electrical connection point on the associated CDI unit, letting technicians and boat owners replace a worn or damaged connector without sourcing an entire new assembly. As a CDI-branded kit, it is built to the same fit and function as the connector originally supplied with the 511-9900 unit, giving a straightforward, direct-fit replacement.\u003c\/p\u003e\u003cp\u003eThis kit is a practical option for marine electrical repairs where the wiring and internal components of the 511-9900 remain serviceable but the connector itself needs to be replaced. Keeping the connector in good condition helps maintain a solid, weather-resistant electrical connection, which is important for reliable operation of the ignition or electrical system it serves.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e CDI Electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 911-9900\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 736983856593\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Amphenol Connector Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned For:\u003c\/strong\u003e CDI 511-9900\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for use with CDI part number 511-9900.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CDI 911-9900 Amphenol Connector Kit used for?\u003c\/strong\u003e The CDI 911-9900 is an Amphenol connector kit designed for use with CDI part number 511-9900, providing the connector components needed to service that unit's electrical connection point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 911-9900 connector kit fit CDI part 511-9900?\u003c\/strong\u003e Yes, the CDI 911-9900 Amphenol Connector Kit is designed specifically for use with CDI 511-9900.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 911-9900 a genuine CDI Electronics part?\u003c\/strong\u003e Yes, part number 911-9900 is manufactured and sold directly under the CDI Electronics brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CDI 911-9900 connector kit weigh?\u003c\/strong\u003e The CDI 911-9900 Amphenol Connector Kit weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the CDI 911-9900 connector kit?\u003c\/strong\u003e The UPC for the CDI Electronics 911-9900 Amphenol Connector Kit is 736983856593.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 911-9900 kit work with CDI units other than 511-9900?\u003c\/strong\u003e The CDI 911-9900 Amphenol Connector Kit is designated for use with CDI 511-9900; compatibility with other CDI part numbers is not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the CDI 911-9900 connector kit?\u003c\/strong\u003e The kit contains the Amphenol connector components used to replace or service the connector on a CDI 511-9900 unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I replace just the connector instead of the whole 511-9900 unit?\u003c\/strong\u003e Yes, the CDI 911-9900 kit exists specifically so the connector portion of a 511-9900 unit can be replaced without swapping the entire assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CDI 911-9900 an OEM or aftermarket part?\u003c\/strong\u003e The 911-9900 is sold under the CDI Electronics brand as a direct replacement connector kit for CDI 511-9900, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 911-9900 kit require special tools to install?\u003c\/strong\u003e No specific tool requirements are listed for the CDI 911-9900 Amphenol Connector Kit.\u003c\/p\u003e","brand":"CDI Electronics","offers":[{"title":"Default Title","offer_id":49027442245851,"sku":"CDI-911-9900","price":23.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-911-9900_lg__59487.1558114897.500.750.jpg?v=1785163464"},{"product_id":"scanstrut-ds-multi-cable-seal-for-multiple-cables-up-to-15mm-marine-grade-aluminum-ip68-waterproof","title":"Scanstrut DS-Multi Cable Seal for Multiple Cables up to 15mm, Marine Grade Aluminum, IP68 Waterproof","description":"\u003cp\u003eThe Scanstrut DS-Multi Cable Seal is a marine grade cable entry gland designed to route and seal multiple cables through a single bulkhead or deck penetration. It accommodates cables up to 15mm (.71 inches) in diameter, making it suitable for a wide range of onboard electronics including lights, GPS, solar, power, and antenna cables. Rather than drilling separate holes for each cable run, the DS-Multi lets you consolidate multiple cable entries into one clean, weatherproof fitting.\u003c\/p\u003e\u003cp\u003eConstructed from marine grade hard aluminum, the DS-Multi resists impact marks and is finished with a UV stable hard coating that holds up to sustained sun and saltwater exposure. The seal itself carries an IP68 waterproof rating, providing a secure barrier against water ingress at the cable entry point. The DS-Multi ships with undrilled bungs, so you can customize the seal to match the specific number and size of cables you need to run, rather than being locked into a fixed pattern. This makes it a practical solution for boat owners adding new electronics or consolidating existing cable runs through the hull or deck.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Scanstrut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e DS-Multi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Cable Seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Diameter Capacity:\u003c\/strong\u003e Up to 15mm (.71 inches) per cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine Grade Hard Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e UV Stable Hard Finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Rating:\u003c\/strong\u003e IP68\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Undrilled Bungs (customizable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.49 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 5060114793309\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Shore Power Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal cable entry seal for cables up to 15mm (.71 inches) in diameter; not tied to a specific engine, boat make, or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers apply to this product.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many cables can the Scanstrut DS-Multi Cable Seal accommodate?\u003c\/strong\u003e The DS-Multi is designed to accommodate multiple cables, each up to 15mm (.71 inches) in diameter, through a single sealed entry point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum cable diameter for the DS-Multi?\u003c\/strong\u003e Each cable routed through the Scanstrut DS-Multi Cable Seal can be up to 15mm (.71 inches) in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the DS-Multi Cable Seal made from?\u003c\/strong\u003e It is constructed from marine grade hard aluminum, which resists impact marks and is finished with a UV stable hard coating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Scanstrut DS-Multi waterproof?\u003c\/strong\u003e Yes, the DS-Multi Cable Seal carries an IP68 waterproof rating for a clean and secure installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the DS-Multi come with pre-drilled holes for cables?\u003c\/strong\u003e No, the Scanstrut DS-Multi ships with undrilled bungs so the seal can be customized to the specific number and size of cables being routed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat types of cables is the DS-Multi commonly used for?\u003c\/strong\u003e The DS-Multi Cable Seal is suited to lights, GPS, solar, power, and antenna cable installations aboard a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Scanstrut DS-Multi Cable Seal weigh?\u003c\/strong\u003e The DS-Multi weighs 0.49 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the DS-Multi resist UV exposure and impact damage?\u003c\/strong\u003e Yes, the hard aluminum construction is UV stable and resists impact marks, holding up to ongoing sun and saltwater exposure on deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I customize how many cables pass through the DS-Multi?\u003c\/strong\u003e Yes, because the included bungs are undrilled, you can drill them to match the number and diameter of cables you need to run, up to 15mm each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Scanstrut DS-Multi Cable Seal?\u003c\/strong\u003e The UPC for the DS-Multi Cable Seal is 5060114793309.\u003c\/p\u003e","brand":"Scanstrut","offers":[{"title":"Default Title","offer_id":49028204495067,"sku":"SCA-DS-Multi","price":87.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SCA-DS-Multi__82386.1722518114.500.750.jpg?v=1785165405"},{"product_id":"trac-trolling-motor-rigging-kit-69440-60-amp-12v-24v-36v-high-current-wiring-kit-replaces-t10141","title":"Trac Trolling Motor Rigging Kit 69440 - 60 Amp 12V\/24V\/36V High-Current Wiring Kit, Replaces T10141","description":"\u003cp\u003eThe Trac Trolling Motor Rigging Kit (69440) is a complete high-current wiring solution for connecting a trolling motor, winch, or other 12V-36V electrical device to your boat's battery. It is built around Trac's 12V\/24V\/36V high-current quick-connect system, which lets you plug and unplug your trolling motor or accessory without dealing with loose wire connections at the battery each time. The kit is rated to handle up to 60 amps, making it suitable for high-draw trolling motors as well as winches and other accessories.\u003c\/p\u003e\u003cp\u003eInside the kit you get everything needed for a full installation: two quick-connect plugs (one for the boat\/battery side and one for the trolling motor or device side), a 1-1\/2 inch round hole adaptor for mounting the plug through a flat panel, and a U-bracket as an alternative mounting option on a flat surface. Wiring includes 30 feet of heavy 8-gauge AWG tin-plated marine-grade positive (red) battery wire and 30 feet of matching negative (black) battery wire, plus two 14-inch 8-gauge cross-over wires for 24V and 36V systems. All heat-shrink terminations are included or pre-installed, and 28 feet of corrugated wire loom is provided to protect and route the wiring through the boat. A 60-amp manual resetting thermal circuit breaker with a visible reset lever is included for circuit protection, and 4 isolator bolts are provided to install the trolling motor or other device.\u003c\/p\u003e\u003cp\u003eThis kit replaces the older Trac part number T10141 and is designed to be installed by routing the wiring harness from the battery position to the panel or mounting location, with the circuit breaker installed on the positive wire as close to the battery as possible.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Trac\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 69440\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666996101413\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Compatibility:\u003c\/strong\u003e 12V, 24V, 36V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Amperage:\u003c\/strong\u003e 60 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Breaker:\u003c\/strong\u003e 60 Amp Manual Resetting Thermal Circuit Breaker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Wire Length:\u003c\/strong\u003e 30 feet positive, 30 feet negative\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Wire Gauge:\u003c\/strong\u003e 8 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-over Wires:\u003c\/strong\u003e Two 14 inch 8-gauge wires\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Loom Length:\u003c\/strong\u003e 28 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRound Hole Adaptor Size:\u003c\/strong\u003e 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e 4 isolator bolts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.63125 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 7.8 x 8 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis kit is a universal fit for any boat that needs high-current 12V, 24V, or 36V wiring for a trolling motor, winch, or other 12V-36V device up to 60 amps.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eT10141\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Trac Trolling Motor Rigging Kit 69440?\u003c\/strong\u003e The 69440 kit includes two quick-connect plugs, a 1-1\/2 inch round hole adaptor, a U-bracket, 30 feet of 8-gauge positive battery wire, 30 feet of 8-gauge negative battery wire, two 14-inch 8-gauge cross-over wires for 24V\/36V systems, a 60-amp manual resetting thermal circuit breaker, 28 feet of corrugated wire loom, and 4 isolator bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many amps does the Trac 69440 rigging kit support?\u003c\/strong\u003e Up to 60 amps, which covers 12V, 24V, and 36V trolling motors, winches, and other electrical devices wired through this kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit work with 12V, 24V, and 36V trolling motors?\u003c\/strong\u003e Yes, the Trac 69440 is built around a 12V\/24V\/36V high-current quick-connect system and includes the cross-over wires needed for 24V and 36V setups in addition to standard 12V wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Trac 69440 replace an older Trac part number?\u003c\/strong\u003e Yes, this kit replaces the older Trac part number T10141 with the same high-current wiring and quick-connect functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gauge wire comes with this kit?\u003c\/strong\u003e The kit uses heavy 8-gauge AWG tin-plated marine-grade wire for both the 30-foot positive and negative battery runs, as well as the 14-inch cross-over wires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the circuit breaker installed in this kit?\u003c\/strong\u003e The included 60-amp manual resetting thermal circuit breaker should be installed on the battery positive wire, as close to the battery positive terminal as possible; it should never be installed on the negative wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the quick-connect plug be mounted through a flat panel?\u003c\/strong\u003e Yes, the Trac 69440 includes a 1-1\/2 inch round hole adaptor for mounting the plug through a flat panel, plus a U-bracket for mounting on the side of a flat surface as an alternative.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this rigging kit compatible with winches or only trolling motors?\u003c\/strong\u003e The 69440 kit can be used for any 12V-36V device up to 60 amps, including trolling motors, winches, or other electrical accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the wire loom included with the kit?\u003c\/strong\u003e 28 feet of corrugated wire loom is included to protect and route the battery wiring through the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre heat-shrink terminations included with the wiring?\u003c\/strong\u003e Yes, all heat-shrink terminations for the Trac 69440 kit are included or pre-installed on the wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is used to mount the trolling motor with this kit?\u003c\/strong\u003e 4 isolator bolts are included in the Trac 69440 kit to install the trolling motor or other device.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Trac Trolling Motor Rigging Kit weigh?\u003c\/strong\u003e The Trac 69440 rigging kit weighs 6.63125 pounds.\u003c\/p\u003e","brand":"Trac Outdoor","offers":[{"title":"Default Title","offer_id":49028252762331,"sku":"TRC-69440","price":197.17,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/69440__41418.1737849825.500.750.jpg?v=1785165650"},{"product_id":"trac-outdoors-69441-trolling-motor-high-current-connector-kit-8-gauge-12v-24v-36v-replaces-t10136","title":"Trac Outdoors 69441 Trolling Motor High-Current Connector Kit, 8 Gauge, 12V\/24V\/36V, Replaces T10136","description":"\u003cp\u003eThe Trac Outdoors 69441 Trolling Motor High-Current Connector Kit lets you upgrade your existing trolling motor wiring to a high-current 12V or 24V quick-connect system. Instead of hard-wiring and re-wiring your trolling motor every time you install or remove it, this kit gives you a plug-and-play connection between the boat's battery wiring and the trolling motor (or any other 12V-36V electrical device) using heavy 8-gauge marine-grade tin-plated copper pig-tail wires rated for 60 amps.\u003c\/p\u003e\u003cp\u003eThe kit includes two quick-connect plugs, one for the boat\/battery side and one for the trolling motor or device side, along with heat shrink butt-splices for sealing each wire connection against moisture and corrosion. For mounting the boat-side plug, you get a 1-1\/2 inch round hole adaptor for installing through a flat panel, plus a U-bracket for surface-mounting on a bulkhead. Installation is straightforward: cut the battery and trolling motor wires to length, strip the insulation, insert into the supplied butt splices connecting black-to-black and red-to-red, and crimp with a crimping tool. Choose either the round hole adaptor or U-bracket depending on your mounting surface. The plugs are suitable for both 12V and 24V applications, and the 8-gauge wiring is rated for 60 amp 12V\/24V\/36V power. This kit replaces the earlier TRAC part number T10136.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Trac Outdoors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 69441\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trolling Motor High-Current Connector Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 8 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Rating:\u003c\/strong\u003e 60 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V\/24V\/36V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Material:\u003c\/strong\u003e Tin-plated copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 2 quick-connect plugs, 1-1\/2 inch round hole adaptor, U-bracket, heavy AWG marine-grade tin-plated copper pig-tail wires, heat shrink butt-splices\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Options:\u003c\/strong\u003e Round hole adaptor (flat panel) or U-bracket (flat surface)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666996101369\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.58125 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis connector kit is a universal upgrade for boat wiring carrying trolling motor or other 12V-36V device power; it is suitable for both 12V and 24V applications and is not limited to a specific boat make or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eT10136\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Trac Outdoors 69441 connector kit used for?\u003c\/strong\u003e It upgrades your trolling motor wiring to a high-current, quick-connect system so you can plug and unplug the trolling motor from the boat's battery wiring instead of hard-wiring it, rated for 12V or 24V power at up to 60 amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 69441 kit replace an older Trac part number?\u003c\/strong\u003e Yes, the Trac Outdoors 69441 High-Current Connector Kit replaces the earlier TRAC part number T10136.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire gauge does the 69441 kit use?\u003c\/strong\u003e The kit uses 8-gauge marine-grade tin-plated copper wire, rated for 60 amp 12V\/24V\/36V power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit compatible with both 12V and 24V systems?\u003c\/strong\u003e Yes, the Trac 69441 connector plugs are suitable for both 12V and 24V applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 69441 kit?\u003c\/strong\u003e The kit includes 2 quick-connect plugs (one for the boat\/battery, one for the trolling motor or device), a 1-1\/2 inch round hole adaptor, a U-bracket, heavy AWG marine-grade tin-plated copper pig-tail wires, and heat shrink butt-splices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the boat-side plug mounted?\u003c\/strong\u003e You can mount the boat-side plug of the 69441 kit through a flat panel using the included 1-1\/2 inch round hole adaptor, or onto a flat surface like a bulkhead using the included U-bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I wire the trolling motor to the connector plug?\u003c\/strong\u003e Cut the trolling motor wires to length, strip about 1\/2 inch of insulation, insert the stripped wires into the butt splices on the plug connecting black-to-black and red-to-red, and crimp the splices with a crimping tool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the Trac 69441 connector kit?\u003c\/strong\u003e The Trac Outdoors 69441 High-Current Connector Kit weighs 0.58125 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used for devices other than a trolling motor?\u003c\/strong\u003e Yes, the quick-connect plugs on the 69441 kit can be used for a trolling motor or any other 12V-36V electrical device wired the same way.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 69441 kit come with mounting hardware?\u003c\/strong\u003e Yes, both the round hole adaptor and the U-bracket are included, along with the screws needed to secure the U-bracket to a flat surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Trac 69441 connector kit?\u003c\/strong\u003e The UPC for the Trac Outdoors 69441 Trolling Motor High-Current Connector Kit is 666996101369.\u003c\/p\u003e","brand":"Trac Outdoor","offers":[{"title":"Default Title","offer_id":49028252795099,"sku":"TRC-69441","price":32.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/trc-t10136__12253.1558181718.500.750.jpg?v=1785165650"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/50031101.jpg?v=1785359956","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-electrical-system-wiring-connectors-bus-bars.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}