{"title":"Electrical System","description":null,"products":[{"product_id":"sierra-18-6823-universal-wiring-harness-for-tilt-and-trim-motors-converts-3-wire-to-2-wire-fits-all-brands","title":"Sierra 18-6823 Universal Wiring Harness - Converts 3-Wire Tilt and Trim Motor to 2-Wire","description":"\u003cp\u003eThe Sierra 18-6823 is a universal wiring harness built to convert a 3-wire tilt and trim motor to a 2-wire design. It is used when replacing or rewiring a boat's tilt and trim motor circuit and is designed to work across brands rather than being limited to a single manufacturer's system. The harness uses color-coded wiring in blue, black, red, green, and white to keep circuit identification straightforward during installation, and it terminates in spade connectors or ring terminals so it can be connected directly to standard tilt and trim motor and relay hardware without additional adapters. As a Sierra product, it is manufactured to meet or exceed the quality of the original equipment wiring it replaces, making it a reliable option for boat owners and marine technicians handling tilt and trim electrical repairs or upgrades. Because the 18-6823 is a universal-fit harness rather than a single-application part, it is commonly stocked as a go-to solution for converting older 3-wire tilt and trim motor setups to the more common 2-wire configuration found on many modern systems. It ships as a single wiring harness unit, ready to install in place of a worn, corroded, or incompatible factory harness.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6823\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Wiring Harness for Tilt and Trim Motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Converts 3-Wire Tilt and Trim Motor to 2-Wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Colors:\u003c\/strong\u003e Blue, Black, Red, Green, White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Spade Connector or Ring Terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 11.5 x 10.12 x 1.12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.38 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282310950\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Universal, works with tilt and trim motors across brands\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe Sierra 18-6823 is a universal wiring harness and is not limited to a specific engine or motor model; it is designed to work with 3-wire tilt and trim motors that need to be converted to a 2-wire circuit, across brands.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-6823 wiring harness do?\u003c\/strong\u003e It converts a 3-wire tilt and trim motor circuit to a 2-wire design, allowing the motor to be wired into a 2-wire tilt and trim system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-6823 fit my boat's brand of outboard or sterndrive?\u003c\/strong\u003e Yes, the 18-6823 is a universal wiring harness designed to work with tilt and trim motors across brands rather than one specific manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire colors are included in this harness?\u003c\/strong\u003e The Sierra 18-6823 harness includes blue, black, red, green, and white wires for circuit identification during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of connectors does the 18-6823 use?\u003c\/strong\u003e This harness terminates in spade connectors or ring terminals, allowing it to connect to standard tilt and trim motor and relay hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-6823 weigh?\u003c\/strong\u003e The Sierra 18-6823 wiring harness weighs 0.38 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-6823 harness?\u003c\/strong\u003e The harness measures 11.5 x 10.12 x 1.12 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6823 genuine OEM or aftermarket?\u003c\/strong\u003e The 18-6823 is a Sierra-branded aftermarket harness manufactured to meet or exceed the quality of the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any additional adapters to install this harness?\u003c\/strong\u003e No additional adapters are required; the 18-6823 comes with spade connectors or ring terminals that connect directly to tilt and trim motor wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-6823?\u003c\/strong\u003e Ordering the Sierra 18-6823 includes one complete 3-wire-to-2-wire tilt and trim wiring harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this harness be used on a 2-wire tilt and trim motor without conversion?\u003c\/strong\u003e The 18-6823 is specifically built to convert 3-wire tilt and trim motors to a 2-wire configuration, so its purpose is the conversion itself rather than direct 2-wire replacement.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988359590107,"sku":"SIE-18-6823","price":83.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-6823__92621.1692196651.500.750.jpg?v=1785189201"},{"product_id":"sierra-18-6951-power-tilt-fuse-30-amp-replaces-851120-fits-volvo-penta-sx-m-dp-sm-dph-b-sterndrive-trim-systems","title":"Sierra 18-6951 Power Tilt Fuse 30 Amp, Replaces 851120, Volvo Penta Trim System","description":"\u003cp\u003eThe Sierra 18-6951 is a 30 amp power tilt fuse for the trim and tilt circuit on Volvo Penta trim systems. It protects the tilt\/trim pump and its wiring from current overloads, blowing before damage can reach the pump motor or harness. When a trim system stops responding, a blown power tilt fuse is one of the first and most common causes to check, and the 18-6951 is the direct replacement fuse for that circuit.\u003c\/p\u003e\u003cp\u003eThis fuse carries a 30 amp rating specific to the power tilt circuit and directly replaces the OEM 851120 fuse. Keeping a spare on board is inexpensive insurance against a dead trim system, since a blown fuse can otherwise leave the outdrive stuck in one position.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6951\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Power Tilt Fuse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Rating:\u003c\/strong\u003e 30 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999320544\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Volvo Penta Trim System\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e851120\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-6951 power tilt fuse do?\u003c\/strong\u003e It protects the power tilt\/trim circuit on a Volvo Penta trim system by blowing before an electrical overload can damage the trim pump motor or wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage is the 18-6951 fuse?\u003c\/strong\u003e The Sierra 18-6951 is rated at 30 amps, matched to the power tilt circuit it protects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM fuse does the 18-6951 replace?\u003c\/strong\u003e It replaces OEM part number 851120 on Volvo Penta trim systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-6951 fuse weigh?\u003c\/strong\u003e The Sierra 18-6951 power tilt fuse weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-6951 a genuine Sierra part?\u003c\/strong\u003e Yes, part number 18-6951 is manufactured and sold under the Sierra brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy Volvo Penta trim system stopped working, could this fuse be the cause?\u003c\/strong\u003e A blown power tilt fuse is a common cause of a non-responsive trim system, and the 18-6951 is the correct replacement fuse to check and swap in on affected Volvo Penta trim circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-6951 fuse easy to install?\u003c\/strong\u003e Yes, it is a direct swap for the OEM 851120 fuse in the power tilt circuit, requiring no wiring modifications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-6951?\u003c\/strong\u003e The UPC for the Sierra 18-6951 power tilt fuse is 030999320544.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I keep a spare 18-6951 fuse on board?\u003c\/strong\u003e Carrying a spare 30 amp power tilt fuse like the 18-6951 is a low-cost way to avoid being stranded with a stuck outdrive if the original fuse blows.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of boat electrical system uses the 18-6951?\u003c\/strong\u003e The 18-6951 is used in Volvo Penta trim systems, specifically in the power tilt\/trim pump circuit.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988359721179,"sku":"SIE-18-6951","price":7.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-6951_lg__31361.1558129729.500.750.jpg?v=1785189154"},{"product_id":"sierra-18-69550-circuit-breaker-20-amp-replaces-oem-3854164-for-volvo-penta-gasoline-engines","title":"Sierra Circuit Breaker 18-69550 - Replaces 3854164 - Volvo Penta I\/O Gasoline Engines","description":"\u003cp\u003eThe Sierra 18-69550 is a plug-in mount circuit breaker engineered for Volvo Penta multiple gasoline engine applications in I\/O (inboard\/outboard) configurations. Rated at 20 amps, this single-pole circuit breaker protects the electrical system from overload by interrupting current flow when the rated threshold is exceeded, helping prevent wiring damage and electrical fires aboard your boat. Its plug-in mounting design allows for straightforward installation into existing panel or harness setups without the need for additional hardware or splicing.\u003c\/p\u003e\u003cp\u003eThis circuit breaker is a direct replacement for OEM part number 3854164 and is built to Sierra's standard for marine electrical components, offering reliable protection in the demanding marine environment. It is a compact, functional component intended for boat owners and marine technicians servicing Volvo Penta gasoline-powered I\/O systems who need a dependable replacement part for electrical system maintenance or repair.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-69550\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 20 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Breaker Type:\u003c\/strong\u003e Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Plug-In Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Poles:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282342715\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolvo Penta multiple gasoline engine applications, I\/O\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e3854164\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-69550 circuit breaker fit?\u003c\/strong\u003e The Sierra 18-69550 circuit breaker fits multiple Volvo Penta gasoline engine applications in I\/O (inboard\/outboard) configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-69550 a direct replacement for OEM part 3854164?\u003c\/strong\u003e Yes, the Sierra 18-69550 circuit breaker replaces OEM part number 3854164 on applicable Volvo Penta gasoline I\/O engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage is this circuit breaker rated for?\u003c\/strong\u003e The 18-69550 is rated at 20 amps, suitable for the electrical circuits found on Volvo Penta gasoline I\/O engines it is designed for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many poles does the 18-69550 circuit breaker have?\u003c\/strong\u003e It is a single-pole (1 pole) circuit breaker.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 18-69550 circuit breaker mounted?\u003c\/strong\u003e This circuit breaker uses a plug-in mount design, allowing it to be installed into an existing panel or harness connection without additional hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-69550 weigh?\u003c\/strong\u003e The Sierra 18-69550 circuit breaker weighs 0.13 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-69550 genuine Sierra or aftermarket?\u003c\/strong\u003e The 18-69550 is a genuine Sierra-branded circuit breaker, sold as a replacement part for the equivalent OEM number 3854164.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of circuit breaker is the 18-69550?\u003c\/strong\u003e It is classified as a standard circuit breaker type, part number 18-69550 from Sierra.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-69550 work on any Volvo Penta engine?\u003c\/strong\u003e The 18-69550 is designed for multiple Volvo Penta gasoline engine applications in I\/O configurations; it is not stated to fit diesel or sterndrive-only variants outside this range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-69550?\u003c\/strong\u003e The 18-69550 order includes one Sierra circuit breaker, ready for plug-in installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-69550 circuit breaker?\u003c\/strong\u003e The UPC for the Sierra 18-69550 circuit breaker is 808282342715.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988359786715,"sku":"SIE-18-69550","price":55.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-69550__05558.1722511979.500.750.jpg?v=1785188430"},{"product_id":"sierra-18-6950-power-tilt-fuse-for-marine-power-tilt-and-trim-systems-5-pack","title":"Sierra Power Tilt Fuse 50 Amp 18-6950, Replaces 982706 982058, for Prestolite EVD 4001\/4002","description":"\u003cp\u003eThe Sierra Power Tilt Fuse, part number 18-6950, is a 50 amp fuse designed to protect the power tilt circuit on applicable outboard and stern drive systems. It is built for use with Prestolite EVD 4001 and EVD 4002 tilt motor applications, covering all models except 2.5L and 3.0L, 1978-85. The fuse uses a lead fuse element housed in a clear body with a through-hole mounting design, making it a straightforward drop-in replacement for a failed or blown power tilt fuse. Because the tilt\/trim circuit draws high current when actuating the tilt motor, a properly rated fuse like this one is essential to protect the wiring and motor from damage in the event of an electrical fault or overload. This fuse is a direct cross-reference for OEM numbers 982706 and 982058, so it restores factory-level protection without modification to the existing wiring harness. Its compact 0.39 x 0.39 x 0.39 inch profile fits the standard power tilt fuse holder used on the covered applications. Keeping a correctly rated spare on hand is a simple way to avoid downtime if the original fuse fails while on the water.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6950\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 50 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Lead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Through-Hole Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999320537\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 982706, 982058\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrestolite EVD 4001, EVD 4002 tilt motor applications\u003c\/li\u003e\n\u003cli\u003eAll models except 2.5L, 3.0L, 1978-85\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e982706\u003c\/li\u003e\n\u003cli\u003e982058\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage is the Sierra 18-6950 power tilt fuse rated for?\u003c\/strong\u003e The Sierra 18-6950 power tilt fuse is rated at 50 amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich OEM part numbers does the 18-6950 fuse replace?\u003c\/strong\u003e It cross-references to OEM numbers 982706 and 982058, making it a direct replacement for either original fuse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fuse fit Prestolite tilt motors?\u003c\/strong\u003e Yes, the 18-6950 is designed for Prestolite EVD 4001 and EVD 4002 tilt motor applications, covering all models except 2.5L and 3.0L, 1978-85.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-6950 power tilt fuse?\u003c\/strong\u003e The fuse measures 0.39 x 0.39 x 0.39 inches, a compact size that fits standard power tilt fuse holders on the covered applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fuse element made of?\u003c\/strong\u003e The 18-6950 uses a lead fuse element housed in a clear body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-6950 fuse weigh?\u003c\/strong\u003e It weighs 0.09 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 18-6950 fuse mounted?\u003c\/strong\u003e It uses a through-hole mounting design that fits into the standard power tilt fuse holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fuse work on 2.5L or 3.0L models?\u003c\/strong\u003e No, the 18-6950 is designed for all Prestolite EVD 4001\/4002 applications except 2.5L and 3.0L, 1978-85.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-6950 an OEM or aftermarket fuse?\u003c\/strong\u003e The 18-6950 is a Sierra-branded replacement fuse that cross-references directly to OEM numbers 982706 and 982058.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat years does the 18-6950 fuse cover?\u003c\/strong\u003e It covers 1978-85 applications using the Prestolite EVD 4001\/4002 tilt motor, excluding 2.5L and 3.0L models.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988363620571,"sku":"SIE-18-6950","price":6.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-6950_lg__30212.1558129590.500.750.jpg?v=1785188325"},{"product_id":"sierra-18-8220-90-amp-fuse-kit-for-mercruiser-470-alternator-conversion-replaces-88-79023a91","title":"Sierra 18-8220 Fuse Kit 90 Amp - Replaces Mercruiser 88-79023A91, Mallory 9-15510, for 470 Series Alternator Conversion","description":"\u003cp\u003eThe Sierra 18-8220 Fuse Kit is a 90 amp fuse assembly designed for use with the alternator conversion system on Mercruiser 470 Series aluminum block engines built with a stator charging system and water cooled voltage regulator to the alternator. This fuse kit protects the charging circuit and is required on engines equipped with a Delco starter, identifiable by the round solenoid mounted directly to the starter. Engines fitted with a Prestolite starter using a remote solenoid do not require this fuse kit, so it is important to visually inspect the starter before ordering.\u003c\/p\u003e\u003cp\u003eSierra manufactures the 18-8220 to meet or exceed original equipment quality and specifications, giving boat owners a reliable replacement or upgrade option when servicing the charging system on covered Mercruiser engines. The kit carries a 90 amp current rating at 12 volts and is finished in white. It is sold separately from the alternator conversion kit itself and is compact, with each unit measuring approximately 0.39 x 0.39 x 0.39 inches and weighing 0.13 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8220\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuse Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 90 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e Mallory 9-15510, Mercruiser 88-79023A91\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercruiser 470 Series aluminum block engines, serial number 4625580 and up, with stator charging system and water cooled voltage regulator to alternator system\u003c\/li\u003e\n\u003cli\u003eMercruiser 224 \/ 3.7L\u003c\/li\u003e\n\u003cli\u003eRequired on engines with a Delco starter (round solenoid mounted to starter); not required on Prestolite starters with remote solenoid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMallory 9-15510\u003c\/li\u003e\n\u003cli\u003eMercruiser 88-79023A91\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-8220 fuse kit fit?\u003c\/strong\u003e The 18-8220 fits Mercruiser 470 Series aluminum block engines, serial number 4625580 and up, that use a stator charging system with a water cooled voltage regulator to the alternator, including the Mercruiser 224 \/ 3.7L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fuse kit required for every 470 Series alternator conversion?\u003c\/strong\u003e No. The Sierra 18-8220 fuse kit is only required on engines with a Delco starter, which has a round solenoid mounted directly to the starter. Engines with a Prestolite starter using a remote solenoid do not require it, so inspect the starter before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of the 18-8220 fuse kit?\u003c\/strong\u003e The Sierra 18-8220 is rated for 90 amps at 12 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM or aftermarket parts does the 18-8220 cross-reference with?\u003c\/strong\u003e The 18-8220 is interchangeable with Mallory 9-15510 and Mercruiser 88-79023A91.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-8220 fuse kit include the alternator bracket or conversion kit?\u003c\/strong\u003e No. The 18-8220 fuse kit is sold separately from the 470 Series alternator conversion kit and covers only the fuse assembly, not the bracket or drive belt used in that kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-8220 fuse kit weigh?\u003c\/strong\u003e It weighs 0.13 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-8220 fuse kit?\u003c\/strong\u003e It is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-8220 fuse kit?\u003c\/strong\u003e The unit measures approximately 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8220 an OEM-quality replacement?\u003c\/strong\u003e Yes, Sierra manufactures the 18-8220 to meet or exceed the original equipment part it replaces, including the Mercruiser 88-79023A91.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my engine needs the 18-8220 fuse kit?\u003c\/strong\u003e Check the starter on your Mercruiser 470 Series engine: a round solenoid mounted to the starter (Delco starter) means the 18-8220 fuse kit is required, while a remote solenoid (Prestolite starter) means it is not needed.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988433842395,"sku":"SIE-18-8220","price":34.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8220_lg__83397.1558131529.500.750.jpg?v=1785188096"},{"product_id":"sierra-18-99367-marine-battery-cable-red-6-awg-6-ft-tinned-ready-battery-to-starter-power-lead","title":"Sierra Battery Cable 18-99367, 6 Foot 6 AWG Red Marine Wiring Cable","description":"\u003cp\u003eThe Sierra 18-99367 is a 6 foot length of 6 AWG red battery cable built for marine battery wiring, charging circuits, and battery charger accessory connections. Heavy-gauge 6 AWG copper cable is sized to carry the higher current loads common in marine battery banks and charging systems, and the red color coding lets installers quickly identify the positive run and keep wiring organized and code-compliant during installation or troubleshooting. At 6 feet in length, it offers enough reach to route between a battery, switch, or charger without excess slack, reducing the need to splice shorter sections together. This cable is a straightforward, general-purpose wiring solution rather than a vehicle-specific fitment part, making it suitable for boats, battery chargers, and other marine 12-volt systems that call for a 6 AWG red cable. It is sold as a standalone cable for use in new installations or as a replacement when an existing battery cable has become corroded, cracked, or undersized for the application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99367\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 6 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282399429\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat length and gauge is the Sierra 18-99367 battery cable?\u003c\/strong\u003e The Sierra 18-99367 is a 6 foot length of 6 AWG cable, sized for marine battery and charging circuit wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this cable?\u003c\/strong\u003e It is red, which is the standard color used to mark the positive side of a 12-volt battery wiring circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-99367 cable weigh?\u003c\/strong\u003e 0.9 pounds is the weight of the Sierra 18-99367 6 foot battery cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable pre-terminated with connectors or lugs?\u003c\/strong\u003e The Sierra 18-99367 is supplied as a length of cable; no terminal or connector details are specified for this part, so buyers needing lugs should plan to add them separately or confirm before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cable be used for a battery charger installation?\u003c\/strong\u003e Yes, the 18-99367 red 6 AWG cable is suitable for marine battery charger accessory wiring as well as general battery and 12-volt circuit connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-99367 fit a specific boat make or engine model?\u003c\/strong\u003e No specific make, engine, or year fitment is listed for this cable; it is a general-purpose 6 AWG battery cable rather than a model-specific part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 6 AWG cable heavy enough for a marine battery bank?\u003c\/strong\u003e 6 AWG is a heavier gauge suited to carrying higher current loads than lighter wire, which is why it is commonly used for battery and charging circuit runs on boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Sierra 18-99367 red battery cable carries UPC 808282399429.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I cut the 6 foot cable to a shorter length?\u003c\/strong\u003e The 18-99367 is sold as a 6 foot length, and like most battery cable it can be cut down to a shorter run if a full 6 feet is not needed for the installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part?\u003c\/strong\u003e Yes, part number 18-99367 is the Sierra part number for this 6 foot, 6 AWG red battery cable.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988442099931,"sku":"SIE-18-99367","price":36.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-941-0606-R_lg__13838.1558113899.500.750.jpg?v=1785189126"},{"product_id":"sierra-18-99372-marine-battery-cable-6-awg-6-ft-black","title":"Sierra 18-99372 Battery Cable, 6 AWG, 6 Foot, Black","description":"\u003cp\u003eThe Sierra 18-99372 is a 6 foot length of black 6 AWG battery cable built for marine battery wiring connections. It falls in Sierra's marine battery charger accessories line, making it a straightforward choice for boaters who need to run or replace a battery cable connection on board. The cable is supplied as a single 6 foot length, ready to be sized and terminated for your specific battery hookup.\u003c\/p\u003e\u003cp\u003eAt 6 AWG, this cable is sized for demanding marine 12-volt wiring runs, and its black jacket color is the standard color-coding boaters look for when routing battery cable alongside a matching red positive run. Weighing 0.9 pounds, it is a manageable length for onboard installation or as a spare kept with your battery service kit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99372\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 6 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282399320\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 cable per unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Marine Battery Charger Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat gauge is the Sierra 18-99372 battery cable?\u003c\/strong\u003e It is 6 AWG battery cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this cable?\u003c\/strong\u003e The Sierra 18-99372 is 6 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-99372?\u003c\/strong\u003e Black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-99372 weigh?\u003c\/strong\u003e 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cables come in a unit?\u003c\/strong\u003e The Sierra 18-99372 is sold as a quantity of 1 cable per unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this cable?\u003c\/strong\u003e 18-99372, the Sierra part number for this 6 foot, 6 AWG black battery cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of marine part is the Sierra 18-99372?\u003c\/strong\u003e It is listed under marine battery charger accessories, used for marine battery wiring connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-99372 cross-reference to another manufacturer's part number?\u003c\/strong\u003e No OEM cross-reference numbers are listed for the Sierra 18-99372.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-99372 a genuine Sierra part?\u003c\/strong\u003e Yes, it is sold under the Sierra brand as part number 18-99372.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988442132699,"sku":"SIE-18-99372","price":36.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-941-0606-B_lg__06298.1558113813.500.750.jpg?v=1785188078"},{"product_id":"sierra-18-99459-marine-battery-cable-black-8-ft-6-awg","title":"Sierra Marine Battery Cable, Black, 8 Feet, 6 AWG, Part 18-99459","description":"\u003cp\u003eThis Sierra battery cable is an 8 foot length of 6 AWG cable with black insulation, built for marine battery wiring and charging connections aboard boats. The 6 AWG gauge is sized to carry higher-amperage current safely, making this cable a fit for main battery leads, battery-to-starter runs, and other heavy-duty electrical connections where a lighter-gauge wire would be undersized. The black jacket allows it to be paired with a red cable of matching gauge and length to keep positive and negative runs visually distinguished during installation, which simplifies wiring and future troubleshooting.\u003c\/p\u003e\u003cp\u003eAt 8 feet, the cable provides enough length to route through typical engine compartments, battery boxes, and bilge areas without needing to splice multiple shorter sections together. It is identified under UPC 808282396398 and is sold as a single cable, part number 18-99459.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99459\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 6 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282396398\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat gauge is the Sierra 18-99459 battery cable?\u003c\/strong\u003e The Sierra 18-99459 battery cable is 6 AWG, a gauge sized for higher-amperage marine electrical connections such as main battery leads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this battery cable?\u003c\/strong\u003e This Sierra battery cable, part number 18-99459, measures 8 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-99459 cable?\u003c\/strong\u003e Black. The Sierra 18-99459 cable has a black outer jacket, which is typically used for the negative side of a battery circuit when paired with a red positive cable of matching gauge and length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the cable weigh?\u003c\/strong\u003e The Sierra 18-99459 battery cable weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable sold as a single cable or a pair?\u003c\/strong\u003e It is sold as a single 8 foot black cable, part number 18-99459, not as a matched positive\/negative pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use 6 AWG cable for my boat's main battery connections?\u003c\/strong\u003e 6 AWG is a common gauge for marine battery wiring where higher current-carrying capacity is needed compared to lighter-gauge wire; the Sierra 18-99459 is offered in this gauge at an 8 foot length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cable have a UPC I can look up?\u003c\/strong\u003e Yes, the Sierra 18-99459 battery cable carries UPC 808282396398.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to cut this cable to length during installation?\u003c\/strong\u003e The Sierra 18-99459 is supplied at a fixed 8 foot length, so it can be trimmed to the exact run needed for your installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-99459 cable pre-terminated with lugs or connectors?\u003c\/strong\u003e The available product details for the Sierra 18-99459 describe the cable itself (black, 8 feet, 6 AWG) without specifying pre-installed terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is part number 18-99459 used for?\u003c\/strong\u003e Part number 18-99459 is a Sierra 8 foot, 6 AWG black marine battery cable used for battery and charging wiring connections on boats.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988444328155,"sku":"SIE-18-99459","price":36.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-941-0608-B_lg__07613.1558114007.500.750.jpg?v=1785329169"},{"product_id":"sierra-18-99460-red-marine-battery-cable-8-ft","title":"Sierra Marine Battery Cable, Red, 8 Gauge, 8 Feet - 18-99460","description":"\u003cp\u003eThis Sierra battery cable is a red, 8 gauge cable cut to an 8 foot length, built for marine battery wiring and charging circuit connections aboard a boat. Red coloring identifies it as a positive-lead cable, helping keep polarity clear and consistent when wiring a battery bank, battery charger, or engine starting circuit. The 8 gauge conductor size and 8 foot length make it suited for battery-to-starter, battery-to-switch, or battery charger runs where a pre-cut length saves the work of measuring and cutting bulk cable stock.\u003c\/p\u003e\u003cp\u003eAs a Sierra-branded marine electrical accessory, this cable is intended for use in the demanding marine environment where dependable current-carrying capacity and consistent gauge sizing matter for safe battery and charging system installations.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99460\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Cable Battery Red Ga. 8 Ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Marine Battery Charger Accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 8 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282395810\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat length is the Sierra 18-99460 battery cable?\u003c\/strong\u003e The Sierra 18-99460 battery cable is cut to 8 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gauge is this battery cable?\u003c\/strong\u003e This Sierra battery cable is 8 gauge (8 AWG).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is this cable red instead of black?\u003c\/strong\u003e Red indicates a positive battery lead, which is the standard color convention used to keep polarity clear when wiring a marine battery or charging circuit; Sierra part 18-99460 is the red 8 gauge, 8 foot version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a black version of this same cable?\u003c\/strong\u003e Sierra part 18-99460 is the red positive-lead cable in 8 gauge, 8 foot length; a black negative-lead cable, if needed, would be a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this battery cable typically used for?\u003c\/strong\u003e This 8 gauge, 8 foot cable is used for marine battery wiring, such as battery-to-starter, battery-to-switch, or battery charger connections aboard a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-99460 battery cable weigh?\u003c\/strong\u003e The Sierra 18-99460 battery cable weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cable be cut to a shorter length during installation?\u003c\/strong\u003e The Sierra 18-99460 cable ships pre-cut at 8 feet, and it can be trimmed shorter to fit a specific installation run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable suitable for marine use?\u003c\/strong\u003e Yes, this is a Sierra-branded battery cable categorized as a marine battery charger accessory, intended for boat electrical and charging system wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Sierra battery cable?\u003c\/strong\u003e The UPC for the Sierra 18-99460 red 8 gauge, 8 foot battery cable is 808282395810.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cable come with terminal ends installed?\u003c\/strong\u003e The available product information for Sierra 18-99460 describes the cable itself; specific terminal ends are not specified, so buyers needing terminals should plan to add or crimp them separately.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988444426459,"sku":"SIE-18-99460","price":36.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-941-0608-R_lg__63198.1558114060.500.750.jpg?v=1785329169"},{"product_id":"amphenol-female-sockets-for-johnson-evinrude-outboards-sierra-18-99511-20-pack","title":"Sierra Amphenol Female Sockets for Johnson Evinrude Outboard Electrical Connectors, 18-99511, Pack of 20","description":"\u003cp\u003eThe Sierra 18-99511 Amphenol Female Sockets are replacement connector pins designed for the Johnson Evinrude outboard electrical system. Sold in a pack of 20 pieces, these female sockets are used to rebuild or repair Amphenol-style multi-pin connectors found in outboard wiring harnesses, allowing individual pins to be replaced rather than requiring a full harness or connector replacement. This makes them a practical solution for technicians and boat owners performing electrical repairs on Johnson Evinrude outboard wiring where corroded, damaged, or worn socket pins are causing poor connections, intermittent faults, or connector failure.\u003c\/p\u003e\u003cp\u003eEach pack provides enough sockets to service multiple connector repairs or to keep on hand as spares for ongoing outboard electrical maintenance. The female sockets are sized to mate with the corresponding Amphenol male pins used in Johnson Evinrude outboard connector assemblies, restoring a secure, reliable electrical connection within the wiring harness.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99511\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Amphenol Female Sockets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 20 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Johnson Evinrude outboard electrical system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282395032\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Johnson Evinrude outboard electrical wiring harness connectors.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Sierra 18-99511 package?\u003c\/strong\u003e The package contains 20 Amphenol female sockets, sold as individual replacement connector pins rather than a complete connector assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outboard brand are these sockets designed for?\u003c\/strong\u003e These female sockets, part number 18-99511, are designed for use in Johnson Evinrude outboard electrical wiring harness connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use these sockets to repair a single damaged pin instead of replacing the whole connector?\u003c\/strong\u003e Yes, the 18-99511 female sockets allow you to replace individual damaged or corroded pins within an Amphenol-style connector without replacing the entire wiring harness connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many sockets come in one pack?\u003c\/strong\u003e One pack of the Sierra 18-99511 includes 20 female sockets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this product weigh?\u003c\/strong\u003e The Sierra 18-99511 Amphenol Female Sockets weigh 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these male or female connector pins?\u003c\/strong\u003e The 18-99511 part number is for female sockets, which mate with the corresponding male pins in a Johnson Evinrude outboard wiring connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these sockets work with Amphenol-style connectors?\u003c\/strong\u003e Yes, the Sierra 18-99511 sockets are sized and styled to fit Amphenol-style connectors used in Johnson Evinrude outboard electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Sierra 18-99511 Amphenol Female Sockets carry UPC 808282395032.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these genuine Sierra parts?\u003c\/strong\u003e Yes, the 18-99511 is a genuine Sierra part number for Amphenol female connector sockets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of repairs are these sockets used for?\u003c\/strong\u003e These sockets are used for electrical repairs on Johnson Evinrude outboard wiring harnesses, specifically to replace worn or corroded connector pins that cause poor electrical connections.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988445016283,"sku":"SIE-18-99511","price":25.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-973-1656_lg__24259.1558114607.500.750.jpg?v=1785329149"},{"product_id":"johnson-evinrude-amphenol-male-pin-sierra-18-99513-outboard-electrical-connector-terminal","title":"Sierra Amphenol Male Pin for Johnson Evinrude Outboard Electrical Connectors, 18-99513","description":"\u003cp\u003eThe Sierra Amphenol Male Pin, part number 18-99513, is a replacement terminal pin for Johnson Evinrude outboard electrical wiring harness connectors. It is designed for use within the Evinrude outboard electrical system, where Amphenol-style connectors join engine wiring harnesses to control and instrument circuits. This male pin allows a technician or boat owner to repair a damaged or corroded connector pin without replacing the entire wiring harness or connector housing, restoring a secure electrical connection at the terminal.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99513\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Johnson Evinrude Amphenol Male Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Evinrude Outboard Electrical System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Amphenol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Type:\u003c\/strong\u003e Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Engine Brand:\u003c\/strong\u003e Johnson Evinrude\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282395025\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-99513 used for?\u003c\/strong\u003e Sierra part number 18-99513 is a male pin used in the Amphenol-style electrical connectors found in the Johnson Evinrude outboard electrical system, allowing repair of a wiring harness connector at the individual pin level.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a male or female pin?\u003c\/strong\u003e The 18-99513 is a male pin, designed to mate with the corresponding female terminal inside a Johnson Evinrude Amphenol connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich engine brand does the 18-99513 pin fit?\u003c\/strong\u003e This pin is intended for Johnson Evinrude outboard electrical connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connector style does this pin work with?\u003c\/strong\u003e The 18-99513 is made for Amphenol-style connectors, the multi-pin connector type used in Johnson Evinrude outboard wiring harnesses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-99513 pin weigh?\u003c\/strong\u003e The Sierra 18-99513 Amphenol male pin weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-99513?\u003c\/strong\u003e The UPC for the Johnson Evinrude Amphenol Male Pin, Sierra part number 18-99513, is 808282395025.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I replace a single damaged pin instead of the whole connector?\u003c\/strong\u003e Yes, the 18-99513 is sold as an individual male pin so a single damaged or corroded terminal can be replaced without buying a complete connector or harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-99513 sold as a single pin or a kit?\u003c\/strong\u003e It is listed as a single Amphenol male pin, part number 18-99513.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does this part fall under?\u003c\/strong\u003e The 18-99513 is categorized within the Evinrude Outboard Electrical System parts group.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sierra manufacture this part under its own brand?\u003c\/strong\u003e Yes, this Amphenol male pin for Johnson Evinrude connectors is branded and sold under Sierra part number 18-99513.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988445049051,"sku":"SIE-18-99513","price":15.23,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-973-1469_lg__33180.1558114546.500.750.jpg?v=1785329149"},{"product_id":"sierra-18-99518-male-terminal-for-deutsch-connectors-marine-electrical-contact-pin","title":"Sierra Male Deutsch Terminal 18-99518 Marine Electrical Connector Pin","description":"\u003cp\u003eThe Sierra 18-99518 is a male Deutsch-style terminal used to build and repair marine electrical connections. This terminal pin is designed to mate with a corresponding female Deutsch terminal, forming a secure, weather-resistant connection point within a Deutsch connector housing. It is commonly used by installers and technicians when building custom wiring harnesses, repairing damaged connectors, or replacing a terminal pin that has been bent, corroded, or otherwise damaged in an existing Deutsch connector assembly.\u003c\/p\u003e\u003cp\u003eBecause it is sold as an individual terminal rather than a full connector kit, the Sierra 18-99518 lets you replace a single damaged pin instead of discarding an entire wiring harness or connector housing. This keeps repairs targeted and cost-effective for boat owners and marine electricians working on engine wiring, trim and tilt circuits, or other Deutsch-connectorized systems commonly found on marine engines and accessories.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99518\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Style:\u003c\/strong\u003e Deutsch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 736983856630\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-99518 a male or female terminal?\u003c\/strong\u003e The Sierra 18-99518 is a male terminal pin designed to mate with a female Deutsch terminal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connector style does the 18-99518 terminal fit?\u003c\/strong\u003e It is built to the Deutsch connector style, so it is meant to be used inside Deutsch-style connector housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-99518 terminal weigh?\u003c\/strong\u003e This terminal weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I replace just one damaged pin instead of the whole connector?\u003c\/strong\u003e Yes, the Sierra 18-99518 is sold as an individual male terminal, so a single damaged or corroded pin in a Deutsch connector can be replaced without discarding the entire harness or housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-99518 terminal?\u003c\/strong\u003e The UPC for the Sierra 18-99518 male Deutsch terminal is 736983856630.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this terminal genuine Sierra or aftermarket?\u003c\/strong\u003e The 18-99518 is a genuine Sierra part, identified by its Sierra manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this terminal typically used for on a boat?\u003c\/strong\u003e Marine technicians use the Sierra 18-99518 male Deutsch terminal to build or repair wiring harnesses that use Deutsch-style connectors, such as those found on engine and accessory wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-99518 come with a connector housing?\u003c\/strong\u003e No, the Sierra 18-99518 is the terminal pin itself, not a complete connector housing assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-99518 male terminal mate with any Deutsch female terminal?\u003c\/strong\u003e The Sierra 18-99518 is manufactured to the Deutsch terminal style, so it is intended to mate with a corresponding Deutsch female terminal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy an individual terminal instead of a full harness?\u003c\/strong\u003e Buying the Sierra 18-99518 as a single male terminal allows a targeted, lower-cost repair when only one pin in a Deutsch connector has failed.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988445081819,"sku":"SIE-18-99518","price":13.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-913-4679_lg__08755.1632143267.500.750.jpg?v=1785329169"},{"product_id":"sierra-18-99512-marine-bullet-connector-kit-insulated-electrical-wire-connectors-for-boat-wiring-and-ignition-repair","title":"Sierra Bullet Connector Kit 18-99512 - Marine Electrical Wire Connectors","description":"\u003cp\u003eThe Sierra 18-99512 Bullet Connector Kit provides a reliable way to join and disconnect marine electrical wiring. Bullet connectors are a common choice on boats because they allow a wire run to be quickly separated for maintenance, panel removal, or engine servicing, then reconnected without re-terminating the wire each time. This kit is supplied as a single package containing the connector components needed to complete wiring connections in 12-volt marine electrical circuits, such as engine harnesses, accessory wiring, and panel connections.\u003c\/p\u003e\u003cp\u003eBecause marine wiring is exposed to vibration, moisture, and temperature swings, having a dedicated bullet connector on hand means a technician or boat owner can make a clean, separable splice rather than relying on a permanent butt connection in a location that may need future access. The compact package is sized for storage in a toolbox or parts bin aboard the vessel or in a service van.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99512\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bullet Connector Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.0625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 3.5 x 3.5 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282394950\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-99512 Bullet Connector Kit used for?\u003c\/strong\u003e The Sierra 18-99512 is a bullet connector kit used to join and separate marine electrical wiring, letting a circuit be disconnected for service and reconnected without re-terminating the wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many connectors are included with part number 18-99512?\u003c\/strong\u003e The 18-99512 kit ships as a single package with a quantity of one, containing the bullet connector components needed to complete a wiring connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the package weight of the 18-99512 connector kit?\u003c\/strong\u003e This kit weighs 0.0625 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the Sierra 18-99512?\u003c\/strong\u003e The package measures 3.5 x 3.5 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Sierra 18-99512 Bullet Connector Kit manufactured?\u003c\/strong\u003e The country of origin listed for the 18-99512 kit is China.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan bullet connectors like the 18-99512 be used on 12-volt boat wiring circuits?\u003c\/strong\u003e Yes, bullet connectors such as the Sierra 18-99512 are designed for use in 12-volt marine electrical wiring, including engine harness and accessory circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-99512 a genuine Sierra part?\u003c\/strong\u003e Yes, 18-99512 is the Sierra manufacturer part number for this bullet connector kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use a bullet connector instead of a permanent wire splice?\u003c\/strong\u003e A bullet connector, like the one in the Sierra 18-99512 kit, allows the connection to be unplugged and reconnected repeatedly, which is useful anywhere a wire run needs to be disconnected for maintenance rather than cut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-99512 Bullet Connector Kit?\u003c\/strong\u003e The UPC for this product is 808282394950.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-99512 kit include installation tools?\u003c\/strong\u003e The 18-99512 package includes the bullet connector components only, packaged as a quantity of one; no additional tooling is specified for this kit.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988445114587,"sku":"SIE-18-99512","price":15.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-911-9783_lg__56647.1558114839.500.750.jpg?v=1785188770"},{"product_id":"sierra-18-99558-terminal-extenders-set-of-4-marine-specialty-tool","title":"Sierra Terminal Extenders, Set of 4, Battery Terminal Extension Kit 18-99558","description":"\u003cp\u003eThe Sierra 18-99558 Terminal Extenders give you a set of 4 extenders designed to add usable length and connection points to battery terminals, making it easier to attach additional cables, accessories, or ring terminals without crowding the primary terminal connection. This set is a practical solution for boats and vehicles where multiple accessories need to share a single battery post, helping keep wiring organized and connections secure.\u003c\/p\u003e\u003cp\u003eSold as a set of 4, these extenders are compact and lightweight, adding minimal bulk to your battery compartment while providing the extra terminal capacity many marine electrical setups require.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99558\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Battery Terminal Extenders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Set of 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09375 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 736983855862\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Sierra 18-99558 terminal extenders set?\u003c\/strong\u003e The Sierra 18-99558 set includes 4 battery terminal extenders, giving you 4 extra connection points for your battery terminals in one purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much do the Sierra 18-99558 terminal extenders weigh?\u003c\/strong\u003e The complete set of 4 Sierra 18-99558 terminal extenders weighs 0.09375 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-99558 terminal extenders?\u003c\/strong\u003e The UPC for the Sierra 18-99558 set of 4 terminal extenders is 736983855862.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are battery terminal extenders used for?\u003c\/strong\u003e Terminal extenders like the Sierra 18-99558 set are used to add extra length and connection capacity to a battery terminal so additional cables or accessories can be connected without overcrowding the original post.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminal extenders come in one Sierra 18-99558 package?\u003c\/strong\u003e One package of the Sierra 18-99558 contains 4 terminal extenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the Sierra 18-99558 terminal extenders sold individually or as a set?\u003c\/strong\u003e The Sierra 18-99558 is sold only as a set of 4 terminal extenders, not individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Sierra 18-99558 terminal extenders help reduce clutter on a battery post?\u003c\/strong\u003e Yes, by extending the terminal connection point, the Sierra 18-99558 set makes it easier to organize multiple wire connections at a single battery post rather than stacking them all on the original terminal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-99558 terminal extenders set a genuine Sierra product?\u003c\/strong\u003e Yes, the Sierra 18-99558 is a genuine Sierra product sold as a new set of 4 terminal extenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes part number 18-99558?\u003c\/strong\u003e Part number 18-99558 is manufactured by Sierra, a marine parts brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sierra 18-99558 terminal extender set installed?\u003c\/strong\u003e The Sierra 18-99558 terminal extenders attach to the existing battery terminal to provide an additional connection point for cables or accessories.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988446720219,"sku":"SIE-18-99558","price":20.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-519-TS77_lg__35407.1558113696.500.750.jpg?v=1785329185"},{"product_id":"sierra-cb60000-1-marine-circuit-breaker-60a-resettable-replaces-minn-kota-mkr-19-ignition-protected-for-trolling-motors-windlass","title":"Sierra CB60000-1 60 Amp Resettable Marine Circuit Breaker, Replaces Minnkota MKR-19","description":"\u003cp\u003eThe Sierra CB60000-1 is a 60 amp resettable circuit breaker built for high-amperage marine electrical circuits, including rigging for trolling motors, windlasses, and other high-amp electrical equipment. It is ignition protected and waterproof, allowing it to hold up in an exposed marine electrical environment while providing dependable overcurrent protection. Rather than functioning purely as a breaker, it can also be used as a switch, giving installers flexibility to combine circuit protection and on\/off control in a single component. The unit is built with stainless steel hardware for corrosion resistance in salt and fresh water applications. It carries a 60 amp current rating with a maximum voltage of 42 VDC, and it mounts in a 3\/8 inch hole, matching the footprint of popular panel-mounted breakers so it can be installed as a replacement without modifying the panel. The Sierra CB60000-1 is a direct replacement for the Minnkota MKR-19 circuit breaker. It ships individually in clamshell packaging; the same breaker is also available as the CB60002-1 in a standard pack of 25 for buyers who need multiple units.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CB60000-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 60 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 42 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Resettable Circuit Breaker, usable as a switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Ignition Protected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Mounts in 3\/8 inch hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Clamshell packaging, sold individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.27 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e Minnkota MKR-19\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMinnkota MKR-19\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage rating of the Sierra CB60000-1 circuit breaker?\u003c\/strong\u003e The Sierra CB60000-1 is rated at 60 amps, making it suited for high-amperage marine circuits such as trolling motors and windlasses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CB60000-1 replace the Minnkota MKR-19?\u003c\/strong\u003e Yes, the Sierra CB60000-1 is a direct replacement for the Minnkota MKR-19 circuit breaker.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum voltage rating of this breaker?\u003c\/strong\u003e 42 VDC is the maximum voltage rating of the Sierra CB60000-1 circuit breaker.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the CB60000-1 be used as a switch instead of a breaker?\u003c\/strong\u003e Yes, the Sierra CB60000-1 can be used as either a switch or a circuit breaker in the same installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra CB60000-1 waterproof?\u003c\/strong\u003e It features a waterproof, ignition-protected design, making the CB60000-1 suitable for marine electrical environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is used on the CB60000-1?\u003c\/strong\u003e Stainless steel hardware is used throughout the Sierra CB60000-1 for corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the CB60000-1 circuit breaker mounted?\u003c\/strong\u003e The CB60000-1 mounts in a 3\/8 inch hole and matches the footprint of popular panel-mounted breakers, so it can replace many existing panel breakers without modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is the CB60000-1 designed for?\u003c\/strong\u003e Rigging trolling motors, windlasses, and other high-amp electrical equipment are the primary applications for the Sierra CB60000-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra CB60000-1 weigh?\u003c\/strong\u003e The Sierra CB60000-1 weighs 0.27 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the CB60000-1 packaged?\u003c\/strong\u003e The Sierra CB60000-1 ships in clamshell packaging as a single unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CB60000-1 resettable, or does it need to be replaced after it trips?\u003c\/strong\u003e It is a resettable circuit breaker, so the Sierra CB60000-1 can be reset after tripping rather than replaced like a fuse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the CB60000-1 and the CB60002-1?\u003c\/strong\u003e The CB60000-1 is the same 60 amp breaker sold individually in clamshell packaging, while the CB60002-1 is sold in a standard pack of 25 units.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988454060251,"sku":"SIE-CB60000-1","price":50.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CD60000-1__91780.1739460283.500.750.jpg?v=1785188555"},{"product_id":"sierra-fs81080-marine-maxi-fuse-block-holds-30-80a-maxi-fuses-32-vdc-snap-on-insulating-cover","title":"Sierra FS81080 Maxi Fuse Block for 30-80 Amp Maxi Fuses, 32 VDC","description":"\u003cp\u003eThe Sierra FS81080 is a Maxi fuse block designed for marine and boat 12-volt and 24-volt DC electrical systems that use Maxi-style fuses rated from 30 to 80 amps. It accepts 18 to 4 AWG wire, with terminals that connect from either the sides or the bottom of the block, giving installers flexibility when running wire in tight panel spaces. The block is rated for a maximum voltage of 32 VDC and is built from reinforced polycarbonate, a material chosen for its resistance to corrosion and impact in a marine environment. A snap-on cover insulates the conductive terminals from accidental contact, helping the installation meet ABYC and USCG requirements. The FS81080 meets SAE J1171, the SAE standard for marine electrical devices. It is commonly used as a central distribution point for high-current circuits such as bilge pumps, windlasses, and battery feeds where a Maxi fuse is the appropriate overcurrent protection. Because it is a single-position block, one FS81080 protects one circuit; multiple blocks or a fuse block bank are used for boats with several high-current circuits. The compact housing measures 0.39 x 0.39 x 0.39 inches and weighs 0.26 pounds, making it easy to mount within existing electrical panels or battery compartments.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e FS81080\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Maxi Fuse Block\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Marine Fuse Blocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuse Type Accepted:\u003c\/strong\u003e Maxi fuses, 30-80 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 32 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Acceptance:\u003c\/strong\u003e 18-4 AWG, from sides or bottom\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Met:\u003c\/strong\u003e SAE J1171\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Reinforced polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.26 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size fuses does the Sierra FS81080 fuse block accept?\u003c\/strong\u003e It is built for Maxi-style fuses rated from 30 to 80 amps, the larger blade-style fuses used for high-current marine circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum voltage rating of this fuse block?\u003c\/strong\u003e The FS81080 is rated for a maximum of 32 VDC, suitable for standard 12-volt and 24-volt marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire sizes can be connected to the FS81080?\u003c\/strong\u003e It accepts wire from 18 AWG up to 4 AWG, and terminals can be wired from either the sides or the bottom of the block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fuse block made of?\u003c\/strong\u003e The Sierra FS81080 is made of reinforced polycarbonate, a durable plastic chosen for its impact resistance in marine electrical panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the FS81080 meet marine safety standards?\u003c\/strong\u003e Yes, it meets SAE J1171, the SAE standard governing marine electrical and electronic devices, and its snap-on cover supports ABYC and USCG compliance for insulated conductive parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a cover over the terminals?\u003c\/strong\u003e Yes, the FS81080 has a snap-on cover that insulates the conductive terminals from accidental contact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many circuits does one FS81080 fuse block protect?\u003c\/strong\u003e The FS81080 is a single-position Maxi fuse block, so it protects one circuit; boats needing multiple high-current circuits protected would use additional blocks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of this fuse block?\u003c\/strong\u003e The Sierra FS81080 measures 0.39 x 0.39 x 0.39 inches and weighs 0.26 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the FS81080 fuse block?\u003c\/strong\u003e It is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat typical marine circuits use a Maxi fuse block like the FS81080?\u003c\/strong\u003e High-current circuits such as bilge pumps, windlasses, and main battery feed lines typically use Maxi fuses in the 30 to 80 amp range that the FS81080 is designed to hold.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988454158555,"sku":"SIE-FS81080","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/FS81080__13868.1722497397.500.750.jpg?v=1785188201"},{"product_id":"sierra-fs79370-marine-boat-fuse","title":"Sierra Fuse FS79370 for Boat Electrical Systems","description":"\u003cp\u003eThe Sierra FS79370 is a replacement fuse designed for marine electrical systems, providing circuit protection for boat wiring and onboard electronics. Marine environments demand components that hold up to vibration, moisture, and temperature swings, and Sierra builds its electrical parts to meet the standards boat owners and marine technicians rely on for dependable performance on the water. This fuse is intended as a straightforward, drop-in replacement for a failed or expired unit in your boat's fuse panel or wiring harness, helping keep your electrical circuits protected against overcurrent conditions. At just 0.03 pounds, it is a lightweight, compact component that is easy to keep on hand as a spare in your onboard toolkit or maintenance locker. Stocking genuine Sierra fuses ensures you have the correct replacement ready when a circuit needs attention, rather than searching for a substitute mid-trip. As part of Sierra's boat fuse lineup, the FS79370 is cataloged under Sierra's Manufacturer Part Number system for easy, accurate reordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e FS79370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Fuses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 023121793705\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra FS79370?\u003c\/strong\u003e The Sierra FS79370 is a fuse for boat electrical systems, cataloged under Sierra's Boat Fuses category as a circuit-protection replacement part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the FS79370 fuse weigh?\u003c\/strong\u003e It weighs 0.03 pounds, making the Sierra FS79370 a lightweight component that is easy to store as a spare on board.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra FS79370?\u003c\/strong\u003e The UPC for the Sierra FS79370 boat fuse is 023121793705.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the FS79370 a genuine Sierra part?\u003c\/strong\u003e Yes, the FS79370 is sold under the Sierra brand and identified by Sierra's own manufacturer part number, FS79370.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere would I use the Sierra FS79370 on a boat?\u003c\/strong\u003e This fuse is used in a boat's electrical system, such as a fuse panel or wiring harness, to protect a circuit from overcurrent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I keep the FS79370 as a spare part?\u003c\/strong\u003e Yes, given its small size and light weight of 0.03 pounds, the Sierra FS79370 is well suited to keeping as a spare in an onboard toolkit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I order the correct replacement fuse for my boat?\u003c\/strong\u003e Reference Sierra's Manufacturer Part Number FS79370 when ordering to ensure you receive the correct fuse for your application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra FS79370 sold individually?\u003c\/strong\u003e The FS79370 is listed as a single fuse under Sierra's Boat Fuses category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does the FS79370 fall under?\u003c\/strong\u003e The Sierra FS79370 is categorized as a Boat Fuse, part of Sierra's marine electrical parts offering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sierra FS79370 different from a generic automotive fuse?\u003c\/strong\u003e The FS79370 is manufactured and cataloged by Sierra specifically for marine use under its Boat Fuses category, rather than being a general automotive part.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988454191323,"sku":"SIE-FS79370","price":3.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-FS79370__64985.1780061456.500.750.jpg?v=1785329161"},{"product_id":"sierra-mp39520-push-pull-switch-on-off-spst-15a-12v-solid-brass-marine-panel-switch","title":"Sierra MP39520 Push-Pull Switch, On-Off SPST, Solid Brass, 3\/8 Inch Mounting Bushing","description":"\u003cp\u003eThe Sierra MP39520 is a push-pull toggle switch built for on-off SPST switching in 12-volt marine electrical circuits. Constructed of solid brass, the switch is designed to hold up in the corrosion-prone environment of a boat's helm or accessory panel, where cheaper plastic-bodied switches tend to fail. Operation is simple: pull the knob to turn the connected circuit on, push it in to turn it off, making it a natural fit for bilge pumps, lights, blowers, horns, and other 12-volt accessories that call for a straightforward manual switch rather than a rocker or toggle.\u003c\/p\u003e\u003cp\u003eThe switch mounts through a 3\/8 inch bushing and is sized to fit panels up to 1 inch thick, so it can be installed in most dash, console, or accessory panel cutouts without needing a custom-drilled hole. It terminates in two screw terminals for a secure, serviceable wiring connection, and the knob itself is a chrome-plated plastic finish that resists fading and wear from sun and spray. Rated for 15 amps at 12 VDC, the MP39520 is sized for typical low-draw marine accessory circuits.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP39520\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Push-Pull, Off-On SPST\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Rating:\u003c\/strong\u003e 15 amps at 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid brass body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKnob Finish:\u003c\/strong\u003e Chrome-plated plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e Two screw terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Bushing Size:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Thickness Fit:\u003c\/strong\u003e Up to 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 3.18 x 1.75 x 6.81 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282368067\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal 12-volt panel-mount switch; no make, model, or year-specific fitment applies.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers apply to this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra MP39520 an on-off switch or does it have multiple positions?\u003c\/strong\u003e The Sierra MP39520 is a single-pole, single-throw (SPST) switch with two positions: off and on. Pulling the knob turns the circuit on, and pushing it in turns it off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage can the MP39520 handle?\u003c\/strong\u003e It is rated for 15 amps at 12 VDC, which covers typical marine accessory circuits like bilge pumps, lights, blowers, and horns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra MP39520 switch made of?\u003c\/strong\u003e The switch body is solid brass, chosen for its resistance to corrosion in a marine environment, with a chrome-plated plastic knob.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick of a panel does the MP39520 fit?\u003c\/strong\u003e The Sierra MP39520 is designed to fit panels up to 1 inch thick, using its 3\/8 inch mounting bushing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole does the MP39520 need?\u003c\/strong\u003e It uses a 3\/8 inch mounting bushing, so the panel cutout should be sized to accept that bushing diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sierra MP39520 wired?\u003c\/strong\u003e It terminates in two screw terminals, allowing wires to be secured directly under the terminal screws rather than requiring soldered or crimped connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP39520 weigh?\u003c\/strong\u003e The Sierra MP39520 weighs 0.15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the physical dimensions of the MP39520 switch?\u003c\/strong\u003e The switch measures 3.18 x 1.75 x 6.81 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP39520 come in a bulk package option?\u003c\/strong\u003e Yes, the same switch design is available in a bulk carton of 100 pieces under Sierra part number MP39522, while the MP39520 is the standard single-unit package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra MP39520 suitable for use on a boat dashboard?\u003c\/strong\u003e Yes, its push-pull operation, brass construction, and panel mounting design make it well suited to boat dash or accessory panel installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when you buy the MP39520?\u003c\/strong\u003e The Sierra MP39520 ships as a complete push-pull switch assembly with mounting bushing and knob, ready to wire to its two screw terminals.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988454617307,"sku":"SIE-MP39520","price":20.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-MP39520__10302.1780061502.500.750.jpg?v=1785188121"},{"product_id":"marine-push-button-horn-switch-red-15-amp-12-vdc-2-brass-blade-terminals-sierra-mp39690","title":"Sierra Push Button Horn Switch, Red, MP39690, Rated 15 Amp at 12 VDC","description":"\u003cp\u003eThe Sierra MP39690 is a red push button switch commonly used as a horn switch on boats and other 12-volt applications. It is rated for 15 amps at 12 VDC, giving it enough capacity for direct switching of a marine horn circuit without an intermediate relay in most installations. The button face is finished in red, which helps operators quickly identify it on a dash or console panel, especially when paired with switches of a different color for other functions. This is a simple, momentary-style push button switch designed to be mounted into a panel cutout, making it a straightforward replacement part when an existing horn button has failed, cracked, or stopped making reliable contact. Because it is built around a standard push button switch design, it is also suitable for other low-voltage momentary switching tasks beyond horn activation wherever a 15 amp, 12 VDC rated red button is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP39690\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Push Button Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Application:\u003c\/strong\u003e Horn Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButton Color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Rating:\u003c\/strong\u003e 15 amps at 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra MP39690 used for?\u003c\/strong\u003e The Sierra MP39690 is a red push button switch commonly used as a horn switch, rated 15 amps at 12 VDC for direct switching of a horn circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the electrical rating of the MP39690 push button switch?\u003c\/strong\u003e It is rated for 15 amps at 12 VDC, which covers typical marine horn switching loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the MP39690 button?\u003c\/strong\u003e Red is the button color on the Sierra MP39690, which helps distinguish it from other switches on a panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra MP39690 horn switch weigh?\u003c\/strong\u003e The MP39690 weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP39690 a momentary push button switch?\u003c\/strong\u003e Yes, the Sierra MP39690 is a push button style switch, the type used for momentary horn activation rather than a toggle or rocker switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the MP39690 be used for something other than a horn button?\u003c\/strong\u003e Yes, since it is a standard 15 amp, 12 VDC push button switch, the Sierra MP39690 can be used for other momentary switching applications, not only as a horn switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a white version of this Sierra push button switch?\u003c\/strong\u003e Sierra offers the same style of push button switch with a white button under a different part number, while the MP39690 is the red button version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP39690 come as a single unit?\u003c\/strong\u003e The Sierra MP39690 is sold as a single red push button switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the Sierra MP39690 switch designed for?\u003c\/strong\u003e 12 VDC is the rated voltage for the MP39690, with a 15 amp current rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP39690 an OEM or aftermarket part?\u003c\/strong\u003e The MP39690 is a Sierra branded push button switch identified by its own part number, MP39690.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988454650075,"sku":"SIE-MP39690","price":9.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sie-mp39690_lg_1__40432.1558133470.500.750.jpg?v=1785329179"},{"product_id":"sierra-mp38910-marine-battery-disconnect-switch-lever-operated-175a-continuous-800a-intermittent-3-8in-brass-terminals","title":"Sierra MP38910 Lever Operated Battery Disconnect Switch, 175A Continuous \/ 800A Intermittent","description":"\u003cp\u003eThe Sierra MP38910 is a lever operated battery disconnect switch built to isolate a boat's battery from its electrical system when the vessel is not in use, helping prevent parasitic drain and reduce fire risk during storage or transport. The switch is rated for 175 amps continuous and 800 amps intermittent, making it suitable for cutting power to marine electrical circuits that see high startup or surge loads. Current flows through 3\/8 inch brass terminals, chosen for their conductivity and corrosion resistance in a marine environment. The lever itself is chrome plated brass, giving it a durable, corrosion resistant finish that stands up to salt air and routine handling. A faceplate is included, allowing for a finished, panel-mounted installation. Operation is simple: the lever moves between on and off positions, giving boat owners a fast, manual way to fully disconnect the battery without pulling cable terminals. This switch is a straightforward replacement or upgrade for existing lever operated disconnect switches on boats, and its compact footprint suits helm panels, battery compartments, and other mounting locations where a manual disconnect is needed. Weighing 1.07 pounds, it is a rugged, panel-mount component intended for direct-current marine electrical systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP38910\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Lever Operated Battery Disconnect Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Current Rating:\u003c\/strong\u003e 175 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Current Rating:\u003c\/strong\u003e 800 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Size:\u003c\/strong\u003e 3\/8 inch brass terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLever Material\/Finish:\u003c\/strong\u003e Chrome plated brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Faceplate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.07 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of the Sierra MP38910 battery disconnect switch?\u003c\/strong\u003e The MP38910 is rated for 175 amps continuous and 800 amps intermittent, so it can handle both steady loads and short high-current surges on a marine 12-volt circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP38910 a manual or automatic disconnect switch?\u003c\/strong\u003e It is a manual, lever operated switch. You move the chrome plated brass lever by hand to open or close the connection between the battery and the boat's electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra MP38910 come with a faceplate?\u003c\/strong\u003e Yes, a faceplate is included with the MP38910, allowing for a clean, finished panel-mount installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size terminals does this switch use?\u003c\/strong\u003e The MP38910 uses 3\/8 inch brass terminals for its battery and load connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the lever made from?\u003c\/strong\u003e Chrome plated brass. The plating resists corrosion in the salt-air and humid conditions common in marine electrical compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra MP38910 weigh?\u003c\/strong\u003e The MP38910 battery disconnect switch weighs 1.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the MP38910 switch?\u003c\/strong\u003e The MP38910 measures approximately 0.39 x 0.39 x 0.39 inches for the core switch body, before the faceplate and lever.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the MP38910 be used to prevent battery drain during storage?\u003c\/strong\u003e Yes, flipping the lever to the off position on the Sierra MP38910 fully isolates the battery from the boat's wiring, which helps prevent parasitic drain when the boat is stored.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra MP38910 suitable for high-amperage marine circuits?\u003c\/strong\u003e With a 175 amp continuous and 800 amp intermittent rating, the MP38910 is built for higher-current marine DC circuits, not just small accessory loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP38910 require any special tools to install?\u003c\/strong\u003e The MP38910 mounts with its included faceplate and connects via 3\/8 inch brass terminals, so installation uses standard marine electrical hand tools for terminating and securing the cables.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988454682843,"sku":"SIE-MP38910","price":77.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sie-mp38910_lg__92395.1558133331.500.750.jpg?v=1785187979"},{"product_id":"sierra-mp78860-4-position-marine-rotary-switch-off-on-1-on-2-on-1-2-selector","title":"Sierra Rotary Selector Switch MP78860, 4-Position Off-On1-On2-On1\u00262, Switch Only","description":"\u003cp\u003eThe Sierra MP78860 is a 4-position rotary selector switch built for marine electrical panels that need to control two separate circuits from a single switch. The rotary knob turret cycles through Off, On 1, On 2, and On 1 \u0026amp; 2, letting an operator run either circuit independently or activate both at the same time without needing two separate switches on the panel. This makes it a practical choice for dual-circuit setups such as split lighting banks, dual pump controls, or other two-circuit accessory arrangements where a single panel opening is preferred over mounting two switches.\u003c\/p\u003e\u003cp\u003eThis is a switch-only unit; it does not include a knob, so an existing knob or a separately purchased knob is required to operate it once installed. The compact design is intended for standard marine switch panel cutouts, keeping panel layouts clean while still providing full control over both connected circuits. At 0.14 pounds, it is a lightweight, low-profile component suited for retrofit or new-build panel work.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP78860\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Switch Rotary Off-On1-On2-On1\u0026amp;2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Positions:\u003c\/strong\u003e Off, On 1, On 2, On 1 \u0026amp; 2 (4 positions)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Switch only, no knob included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Switches \u0026amp; Panels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282368333\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat are the switch positions on the Sierra MP78860?\u003c\/strong\u003e The MP78860 is a 4-position rotary switch with Off, On 1, On 2, and On 1 \u0026amp; 2 settings, allowing either circuit to be run separately or both circuits to be run together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP78860 come with a knob?\u003c\/strong\u003e No, the Sierra MP78860 is a switch-only unit and does not include a knob; a compatible knob must be installed separately to operate it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the MP78860 used for?\u003c\/strong\u003e It functions as a rotary selector switch for controlling two separate marine electrical circuits from one panel position, useful for setups like dual lighting banks or dual pump controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP78860 weigh?\u003c\/strong\u003e The Sierra MP78860 rotary switch weighs 0.14 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I run both circuits at the same time with this switch?\u003c\/strong\u003e Yes, the On 1 \u0026amp; 2 position on the MP78860 activates both connected circuits simultaneously, in addition to the independent On 1 and On 2 positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP78860 an On-Off-On style switch or something different?\u003c\/strong\u003e It is a 4-position rotary switch (Off, On 1, On 2, On 1 \u0026amp; 2), which offers an additional combined-circuit position beyond a standard 2-position On-Off-On switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra MP78860?\u003c\/strong\u003e The UPC for the Sierra MP78860 rotary switch is 808282368333.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP78860 genuine Sierra hardware?\u003c\/strong\u003e Yes, MP78860 is the genuine Sierra manufacturer part number for this rotary selector switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the MP78860?\u003c\/strong\u003e The MP78860 ships as the switch mechanism only; since it is a switch-only unit with no knob, the knob is not included and must be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of marine part is the MP78860?\u003c\/strong\u003e Sierra lists the MP78860 under Switches \u0026amp; Panels, making it suited for installation in a marine switch panel.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457697499,"sku":"SIE-MP78860","price":16.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MP78860__09363.1722497935.500.750.jpg?v=1785329181"},{"product_id":"sierra-rk19500k-illuminated-rocker-switch-kit-off-on-spst-with-dependent-pilot-light-and-4-snap-in-color-lenses-ip54-weather-resistant","title":"Sierra RK19500K Illuminated Rocker Switch, Off-On SPST with Dependent Pilot Light","description":"\u003cp\u003eThe Sierra RK19500K is an illuminated, weather resistant rocker switch built for marine electrical panels. It is configured as an Off-On SPST switch with a dependent pilot light, meaning the light illuminates whenever the switch itself is in the \"on\" position, giving the operator an immediate visual confirmation that the circuit is live. The switch is a panel mount rocker design and carries an IP54 ingress protection rating, helping it resist splashing water, spray, and the humid conditions typical of a boat helm or accessory panel.\u003c\/p\u003e\u003cp\u003eThe switch comes with four snap-in lenses, one of each color, so it can be finished to match panel color coding or to visually distinguish circuits (for example, bilge pump, navigation lights, or accessory power) at a glance. The rocker actuator and housing are finished in white. Because the RK19500K uses a dependent pilot light rather than an independent one, it is best suited for installations where the operator wants the light tied directly to the switch state rather than to a separate panel illumination circuit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RK19500K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Function:\u003c\/strong\u003e Off-On SPST\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot Light Type:\u003c\/strong\u003e Dependent, illuminates in the \"on\" position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Lenses:\u003c\/strong\u003e 1 lens of each color (4 total)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rocker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Rocker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the RK19500K switch function do?\u003c\/strong\u003e The Sierra RK19500K is wired as an Off-On SPST switch, meaning it has two positions (off and on) and switches a single circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the pilot light stay on all the time?\u003c\/strong\u003e No. The RK19500K uses a dependent pilot light, so the light only illuminates when the switch itself is in the \"on\" position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many lens colors come with this switch?\u003c\/strong\u003e Four snap-in lenses are included with the RK19500K, one of each color, so the switch can be color-coded for its circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RK19500K rated for wet or splash-prone locations?\u003c\/strong\u003e Yes, the RK19500K carries an IP54 ingress protection rating, which covers protection against dust and splashing water from any direction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the switch housing?\u003c\/strong\u003e The Sierra RK19500K rocker switch has a white housing and actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the RK19500K installed?\u003c\/strong\u003e The RK19500K is a panel mount rocker switch, designed to snap into a standard rocker switch cutout on an electrical panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the RK19500K and the RK19510K?\u003c\/strong\u003e The RK19500K has a dependent pilot light that illuminates only when the switch is turned on, while the RK19510K has an independent pilot light that illuminates whenever the panel lighting is turned on, regardless of the switch position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the RK19500K weigh?\u003c\/strong\u003e The Sierra RK19500K weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the RK19500K switch?\u003c\/strong\u003e The RK19500K measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the RK19500K manufactured?\u003c\/strong\u003e The Sierra RK19500K rocker switch is manufactured in the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I replace the lens color later without buying a new switch?\u003c\/strong\u003e Since the RK19500K ships with one lens of each of the four included colors, you can swap the snap-in lens to a different included color without needing another switch.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457828571,"sku":"SIE-RK19500K","price":11.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/RK19500K__09500.1722489158.500.750.jpg?v=1785187981"},{"product_id":"sierra-sp21030-10-function-touch-switch-panel-12v-24v-ip67-compact-marine-digital-control-panel-with-remote-relay-box","title":"Sierra SP21030 10 Function Touch Panel, 12V\/24V Backlit Switch Panel with IP67 Rated Faceplate","description":"\u003cp\u003eThe Sierra SP21030 is a 10 function touch panel designed to control multiple electrical circuits from a single, ultra-compact control point. The panel uses a PET membrane touch surface with backlit push buttons for easy readability in low-light and nighttime conditions. Each of the 10 buttons can be individually programmed as either a latching or momentary circuit, making the panel suitable for standard on\/off accessories as well as momentary applications such as horns or wipers.\u003c\/p\u003e\u003cp\u003eCircuit protection is built directly into the panel with a resettable PPTC fuse rated at 10 amps per function, and the panel supports a maximum cumulative load of 35 amps across a voltage range of 11 to 30VDC, allowing use on both 12V and 24V systems. The touch panel connects to a separate control relay box using a micro-USB style cable, and the flexible wiring lets the control box be remote mounted up to 1 meter away from the touch panel itself, simplifying installation in tight helm areas. The panel itself requires almost no mounting depth and fits into a 15mm cut-out, and the design is up to 60 percent smaller than traditional switch panels of similar function count.\u003c\/p\u003e\u003cp\u003eThe panel face carries an IP67 rating for protection against dust and temporary water immersion, while the control box and wiring allow flexible placement behind the dash. Housed in a durable plastic construction with a multi-color LED-lit faceplate, the Sierra SP21030 is built for marine electrical panel upgrades and new installations alike.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SP21030\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Panel, 10 Function Touch 12V\/24V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Functions:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e 11-30VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Rating:\u003c\/strong\u003e 10A per function at 12VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Cumulative Amp Rating:\u003c\/strong\u003e 35A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Protection:\u003c\/strong\u003e Built-in resettable PPTC fuse per function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgrammable Circuits:\u003c\/strong\u003e Latching or momentary per function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection:\u003c\/strong\u003e IP67 rated (panel only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e CE certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate Material:\u003c\/strong\u003e PET membrane touch panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Dimensions:\u003c\/strong\u003e 91mm x 75mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Box Dimensions:\u003c\/strong\u003e 136mm x 90mm x 32mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Cut-Out:\u003c\/strong\u003e 15mm hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282382360\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many circuits does the Sierra SP21030 control?\u003c\/strong\u003e The SP21030 controls 10 separate functions from one touch panel, with each button individually programmable as a latching or momentary switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan each button be set for momentary use, like a horn or wiper?\u003c\/strong\u003e Yes, every function on the SP21030 touch panel can be programmed as either latching (on\/off) or momentary, which makes it suitable for horn or wiper circuits as well as standard accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this panel rated for 12V or 24V systems?\u003c\/strong\u003e The SP21030 has a voltage rating of 11-30VDC, so it works on both 12V and 24V boat electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage rating per switch on the SP21030?\u003c\/strong\u003e Each of the 10 functions on the Sierra SP21030 is rated for 10A at 12VDC, with a maximum cumulative load of 35A across the whole panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SP21030 have built-in circuit protection?\u003c\/strong\u003e Yes, each function has its own built-in resettable PPTC fuse, so an overloaded circuit trips and resets without needing to replace a fuse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow deep of a mounting cut-out does this panel need?\u003c\/strong\u003e The SP21030 touch panel needs only a 15mm cut-out hole and almost no mounting depth, since the control relay box mounts separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the control box be mounted away from the touch panel?\u003c\/strong\u003e Yes, the SP21030 uses flexible wiring with a micro-USB style cable that allows the control relay box to be remote mounted up to 1 meter from the touch panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra SP21030 waterproof?\u003c\/strong\u003e The touch panel face carries an IP67 rating, meaning it is protected against dust and temporary immersion; this rating applies to the panel only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the physical dimensions of the touch panel and control box?\u003c\/strong\u003e The SP21030 touch panel measures 91mm x 75mm, while the separate control box measures 136mm x 90mm x 32mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SP21030 faceplate made from?\u003c\/strong\u003e The faceplate is a PET membrane touch surface, backed by a plastic housing, with backlit push buttons for visibility in low light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra SP21030 weigh?\u003c\/strong\u003e The SP21030 10 function touch panel weighs 1.2 pounds.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457959643,"sku":"SIE-SP21030","price":147.16,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SP21030__22999.1722517379.500.750.jpg?v=1785188306"},{"product_id":"sierra-rk19440-1-contura-ii-illuminated-rocker-switch-off-on-spst-20a-weather-resistant-marine-switch","title":"Sierra RK19440-1 Contura II Illuminated Rocker Switch, Off-On SPST, Weather Resistant","description":"\u003cp\u003eThe Sierra RK19440-1 is an illuminated Contura II style rocker switch built for marine electrical panels where a compact, weather resistant off-on control is needed. It uses an off-on SPST circuit with a 1-way circuit type, so it simply opens or closes a single electrical path for the accessory it controls, such as a cabin light, bilge blower, or livewell pump. The switch panel mounts into a standard Contura II cutout and includes a neoprene mounting gasket to help seal the panel opening against moisture and spray, an important feature for helm stations and dashboards exposed to the marine environment.\u003c\/p\u003e\u003cp\u003eConstruction combines metal and plastic components with silver contact material for reliable current carrying, and the switch is rated for 20 amps. It carries an International Protection Rating of IP541 for resistance to dust and water intrusion. The compact 0.39 x 0.39 x 0.39 inch body fits into tight switch panel layouts alongside other Contura II series switches. This switch is designed for boats and other marine 12-volt style electrical systems where an illuminated, weather resistant rocker control is preferred over a standard toggle switch.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RK19440-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e ON-OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 1-way (SPST)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 20 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rocker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Rocker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal:\u003c\/strong\u003e Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal, Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Protection Rating:\u003c\/strong\u003e IP541\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Vehicle Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282305925\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra RK19440-1 switch do?\u003c\/strong\u003e The RK19440-1 is an illuminated off-on rocker switch with a 1-way, SPST circuit, meaning it simply turns a single accessory circuit on or off, such as a cabin light or bilge pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this switch illuminated?\u003c\/strong\u003e Yes, the RK19440-1 is an illuminated Contura II style rocker switch, so it lights up when installed on a powered circuit for easy visibility at night.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the RK19440-1 rocker switch?\u003c\/strong\u003e The switch body measures 0.39 x 0.39 x 0.39 inches, sized to fit a standard Contura II panel cutout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the RK19440-1 switch weigh?\u003c\/strong\u003e The Sierra RK19440-1 weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of this switch?\u003c\/strong\u003e The RK19440-1 is rated for 20 amps, with silver contact material for reliable current carrying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RK19440-1 waterproof or weather resistant?\u003c\/strong\u003e This switch carries an International Protection Rating of IP541 and includes a neoprene mounting gasket, making it weather resistant for marine panel installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials is the RK19440-1 switch made of?\u003c\/strong\u003e Sierra builds the RK19440-1 from metal and plastic components with silver contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the RK19440-1 mounted?\u003c\/strong\u003e It is a panel mount rocker switch designed to snap into a standard Contura II style cutout, and it includes a neoprene mounting gasket for a sealed fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the RK19440-1?\u003c\/strong\u003e The RK19440-1 switch ships as a single illuminated off-on rocker switch with its neoprene mounting gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra RK19440-1 a genuine Sierra part?\u003c\/strong\u003e Yes, the RK19440-1 is a genuine Sierra branded Contura II rocker switch, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of circuit does the RK19440-1 use?\u003c\/strong\u003e It uses a 1-way, off-on SPST circuit, meaning it controls a single accessory with no separate positions beyond on and off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is the RK19440-1 switch suited for?\u003c\/strong\u003e The RK19440-1 is suited for boat electrical panels controlling accessories like lighting, pumps, or blowers where an illuminated, weather resistant on-off switch is needed.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457992411,"sku":"SIE-RK19440-1","price":14.45,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/RK19440-1__26284.1722509852.500.750.jpg?v=1785188434"},{"product_id":"sierra-rk19700-contura-iii-marine-rocker-switch-off-on-spst-red-led-illuminated-black-20a-12v","title":"Sierra RK19700 Marine Rocker Switch, Illuminated 12 Volt On-Off, Black","description":"\u003cp\u003eThe Sierra RK19700 is a Contura III style illuminated rocker switch built for marine electrical panels. It operates as a simple ON-OFF switch rated for 12 volt DC circuits, with a red LED that illuminates when the switch is in the ON position so you can see switch status at a glance, even in low light on the helm or console. Internally it uses brass blade terminals with silver contacts on a normally open circuit, wired in a parallel circuit configuration for straightforward integration into standard boat wiring.\u003c\/p\u003e\u003cp\u003eThe housing is molded from non-corrosive black plastic designed to resist the moisture, salt spray, and vibration typical of a marine environment. The switch meets UL 1500 and ISO 8846 ignition protection requirements, making it suitable for use near fuel systems and engine spaces where ignition-protected electrical components are required. Its compact 0.39 x 0.39 x 0.39 inch footprint fits standard rocker switch panel cutouts used across boats, helm consoles, and accessory panels.\u003c\/p\u003e\u003cp\u003eThis switch is sold as the main switch component only, ready to be wired into an existing panel opening. It is a good fit for bilge pumps, lighting circuits, blowers, and other 12 volt accessory circuits that need a reliable ON-OFF control with visual confirmation of power status.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RK19700\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rocker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e ON-OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 12 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e Parallel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal:\u003c\/strong\u003e Marine brass blade terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic, Silver, Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black, Red (illumination)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Main component only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the Sierra RK19700 rocker switch rated for?\u003c\/strong\u003e The RK19700 is rated for 12 volt DC circuits, which is the standard voltage used in most boat electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch light up when it is on?\u003c\/strong\u003e Yes, the RK19700 has a red LED that illuminates when the rocker is pressed to the ON position, giving a clear visual indication that the circuit is powered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does ON-OFF mean for this switch?\u003c\/strong\u003e It means the RK19700 has two positions only, on and off, with no momentary or third position, controlled through a normally open contact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the terminals made of on the RK19700?\u003c\/strong\u003e The Sierra RK19700 uses brass blade terminals with silver contacts, which resist corrosion and maintain a solid electrical connection in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RK19700 safe to install near an engine or fuel system?\u003c\/strong\u003e The RK19700 meets UL 1500 and ISO 8846 ignition protection requirements, which covers installation in spaces where ignition-protected electrical equipment is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size panel cutout does this switch need?\u003c\/strong\u003e The Sierra RK19700 measures 0.39 x 0.39 x 0.39 inches, matching the standard rocker switch cutout size used on most marine panels and consoles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the RK19700 switch housing?\u003c\/strong\u003e The housing is black plastic, with the switch showing a red glow from its LED when it is switched on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the RK19700 made of?\u003c\/strong\u003e It is built from non-corrosive plastic for the housing with brass and silver used in the terminals and contacts, materials chosen to hold up in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra RK19700 weigh?\u003c\/strong\u003e The RK19700 weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the RK19700 come with wiring or a mounting bracket?\u003c\/strong\u003e No, the Sierra RK19700 ships as the main switch component only, without additional wiring, brackets, or accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of circuits is this switch typically used for?\u003c\/strong\u003e Its 12 volt ON-OFF rating with normally open contacts makes the RK19700 suitable for accessory circuits such as lighting, blowers, or pumps on a boat's electrical panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the wattage rating of the RK19700?\u003c\/strong\u003e The Sierra RK19700 is rated for 12 watts of load.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988458025179,"sku":"SIE-RK19700","price":16.17,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/RK19700__72811.1722354553.500.750.jpg?v=1785188665"},{"product_id":"sierra-un42000-marine-momentary-push-button-switch-spst-mom-on-off-10-amp-12v-die-cast-with-silver-contacts","title":"Sierra UN42000 Push Button Switch, Momentary On-Off SPST, 10 Amp 12 Volt","description":"\u003cp\u003eThe Sierra UN42000 is a momentary on-off SPST push button switch built for marine electrical panels and helm applications where a rugged, waterproof control is required. The switch operates on a momentary on-off circuit: press to close the circuit, release to open it, making it well suited for horns, bilge pumps, trim tabs, windshield wipers, and other accessory circuits that call for a push-and-hold control rather than a fixed toggle position.\u003c\/p\u003e\u003cp\u003eConstruction is extra heavy duty die cast metal for long-term durability in a marine environment, with silver contacts that resist corrosion and maintain reliable conductivity under repeated cycling. A rubber boot nut seals the actuator against water intrusion at the panel face, and the switch terminates in two boss screw terminals for a secure, vibration-resistant wire connection. The switch is rated 10 amps at 12 VDC, matching typical 12-volt marine accessory loads, and is designed for handlebar or panel mounting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e UN42000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Push Button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Operation:\u003c\/strong\u003e Momentary On-Off (SPST)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 10 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e 2 Boss Screw Terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Die Cast\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoot Material:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Handlebar Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 5.5 x 2.88 x 1.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282368036\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does momentary on-off SPST mean for the Sierra UN42000 switch?\u003c\/strong\u003e It means the UN42000 only closes the circuit while the button is held in; releasing the button returns it to the off position, and SPST indicates a single-pole, single-throw contact arrangement with one circuit being switched.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amp and voltage rating of this switch?\u003c\/strong\u003e The Sierra UN42000 is rated 10 amps at 12 volts DC, sized for standard 12-volt marine accessory circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the UN42000 waterproof enough for helm or deck mounting?\u003c\/strong\u003e Yes, it carries an IP54 ingress protection rating and uses a rubber boot nut seal at the actuator, giving it splash and dust resistance suitable for marine panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the terminals like on this switch?\u003c\/strong\u003e The UN42000 uses 2 boss screw terminals, which accept ring or spade connectors for a secure, vibration-resistant wire connection rather than quick-disconnect blades.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the switch housing made of?\u003c\/strong\u003e Sierra builds the UN42000 with an extra heavy duty die cast metal housing and silver contacts for durability and reliable conductivity over repeated use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the UN42000 push button switch?\u003c\/strong\u003e The switch measures 5.5 x 2.88 x 1.75 inches and weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this switch be used for a horn or bilge pump circuit?\u003c\/strong\u003e The momentary on-off SPST action of the UN42000 makes it a good fit for push-to-activate circuits such as horns, bilge pumps, or windshield wipers where the accessory should only run while the button is pressed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part or an aftermarket equivalent?\u003c\/strong\u003e The UN42000 is a genuine Sierra push button switch, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting style does the UN42000 use?\u003c\/strong\u003e It is designed for handlebar or panel mounting, with the rubber boot nut sealing the actuator at the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the contacts on this switch silver or a base metal?\u003c\/strong\u003e The UN42000 uses silver contacts, chosen for their corrosion resistance and consistent electrical conductivity in a marine switch.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988458057947,"sku":"SIE-UN42000","price":20.71,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/UN42000__59728.1722379771.500.750.jpg?v=1785189022"},{"product_id":"sierra-wh10520-1-male-boat-side-trolling-motor-plug-12v-with-butt-connectors-pairs-with-wh10530-1-socket","title":"Sierra WH10520-1 Male Boat Side Trolling Motor Plug, 12 Volt, 6 Inch 8 Gauge Wire with Butt Connectors","description":"\u003cp\u003eThe Sierra WH10520-1 is a male boat side trolling motor plug rated for 12 volt systems. It comes pre-wired with 6 inch, 8 gauge wire leads terminated in butt connectors, so it splices directly into the boat's existing trolling motor wiring without additional crimping hardware for the connector end. The plug is the boat side half of a two-piece connection system and is designed to mate with the Sierra WH10530-1 female motor side trolling motor socket, which is sold separately. This setup lets a trolling motor be quickly disconnected from the boat's power wiring for storage, motor swaps, or seasonal removal, rather than requiring the wiring to be hardwired or spliced every time the motor is mounted or removed. Each unit is sold individually (one plug per pack), making it a straightforward replacement or add-on part for boaters upgrading or repairing their trolling motor quick-connect wiring. Because it is a 12 volt plug with 8 gauge wire, it is sized for typical trolling motor current draw rather than higher-voltage 24V or 36V systems. The heavier 8 gauge wire gauge helps minimize voltage drop over the connection compared to thinner wire options.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e WH10520-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Male Boat Side Trolling Motor Plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 8 gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Butt connectors included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompanion Part:\u003c\/strong\u003e Use with Sierra WH10530-1 Female Motor Side Trolling Motor Socket 12 Volt (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 (Each)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.13 x 3.5 x 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.26 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282360016\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal 12 volt boat side trolling motor plug intended for use with the mating Sierra WH10530-1 female motor side socket; it is not specific to a single trolling motor brand or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra WH10520-1 used for?\u003c\/strong\u003e It is a male boat side trolling motor plug that connects the boat's 12 volt wiring to a trolling motor, allowing the motor to be quickly disconnected from the boat's power leads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the WH10520-1 come with wiring attached?\u003c\/strong\u003e Yes, the WH10520-1 has 6 inch, 8 gauge wire leads already attached with butt connectors, so it can be spliced into existing boat wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat socket does the WH10520-1 plug into?\u003c\/strong\u003e It mates with the Sierra WH10530-1 female motor side trolling motor socket, which is a separate part sold on its own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WH10530-1 included with this plug?\u003c\/strong\u003e No, the WH10530-1 female motor side socket is sold separately from the WH10520-1 male boat side plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the WH10520-1 rated for?\u003c\/strong\u003e The WH10520-1 trolling motor plug is rated for 12 volt systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire gauge does the WH10520-1 use?\u003c\/strong\u003e It uses 8 gauge wire in 6 inch lengths, terminated with butt connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many plugs come in a WH10520-1 pack?\u003c\/strong\u003e The WH10520-1 is sold individually, with one male boat side plug per unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the WH10520-1?\u003c\/strong\u003e The WH10520-1 measures 2.13 x 3.5 x 9 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the WH10520-1 weigh?\u003c\/strong\u003e The WH10520-1 weighs 0.26 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WH10520-1 the boat side or motor side connector?\u003c\/strong\u003e The WH10520-1 is the male boat side connector, designed to be wired into the boat and mate with the motor side socket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the WH10520-1 work with a 24 volt trolling motor system?\u003c\/strong\u003e The WH10520-1 is rated for 12 volt systems, matching its 8 gauge wire and connector sizing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to crimp the connectors myself?\u003c\/strong\u003e The WH10520-1 already includes butt connectors on its 6 inch, 8 gauge wire leads, so it is ready to splice into existing wiring.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988458221787,"sku":"SIE-WH10520-1","price":19.74,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/WH10520-1.png?v=1784938623"},{"product_id":"sierra-wh10480-1-trolling-motor-plug-male-motor-side-12v-8-gauge-wire-with-butt-connectors-pairs-with-wh10530-1","title":"Sierra WH10480-1 Male Motor Side Trolling Motor Plug, 12 Volt","description":"\u003cp\u003eThe Sierra WH10480-1 is a male, motor-side trolling motor plug built for 12 volt trolling motor wiring circuits. It comes with 6 inch, 8 gauge wire leads already fitted with butt connectors, so it splices directly into existing trolling motor wiring without needing a separate crimp step for the plug end. This connector is designed to mate with the Sierra WH10530-1 connector, which is sold separately, giving the trolling motor circuit a quick-disconnect point between the motor and the boat's battery wiring.\u003c\/p\u003e\u003cp\u003eBecause it is the motor-side (male) half of the connector pair, the WH10480-1 is intended to be installed on the trolling motor lead, with its matching WH10530-1 counterpart installed on the opposite side of the circuit. The plug is finished in black and is also available packaged in bulk as part number WH10482, a pack of 100, for shops or installers wiring multiple boats. Each individual WH10480-1 unit weighs 0.23 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e WH10480-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Male, motor side trolling motor plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Lead:\u003c\/strong\u003e 6 inch, 8 gauge, with butt connectors attached\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMates With:\u003c\/strong\u003e Sierra WH10530-1 (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Package Part Number:\u003c\/strong\u003e WH10482 (pack of 100)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.23 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal 12 volt trolling motor wiring application; use with the Sierra WH10530-1 mating connector.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra WH10480-1 used for?\u003c\/strong\u003e The WH10480-1 is a male, motor-side trolling motor plug used to create a quick-disconnect point in a 12 volt trolling motor wiring circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WH10480-1 a 12 volt or 24 volt connector?\u003c\/strong\u003e It is rated for 12 volt systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gauge wire does the WH10480-1 use?\u003c\/strong\u003e It comes with 6 inch, 8 gauge wire leads with butt connectors already attached.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat part connects to the WH10480-1?\u003c\/strong\u003e The WH10480-1 is designed to mate with the Sierra WH10530-1 connector, which is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the WH10480-1 come with the butt connectors already installed?\u003c\/strong\u003e Yes, the 6 inch, 8 gauge leads on the WH10480-1 have butt connectors attached, ready to splice into existing wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WH10480-1 sold individually or in bulk?\u003c\/strong\u003e The WH10480-1 is available as a single unit, and it is also offered in a bulk case pack under part number WH10482.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is part number WH10482?\u003c\/strong\u003e WH10482 is the bulk package version of the WH10480-1, sold as a pack of 100 for installers wiring multiple units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the WH10480-1 plug?\u003c\/strong\u003e The WH10480-1 connector is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the WH10480-1 weigh?\u003c\/strong\u003e The Sierra WH10480-1 weighs 0.23 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WH10480-1 the motor side or boat side connector?\u003c\/strong\u003e The WH10480-1 is the motor-side (male) half of the connector pair, not the boat-side half.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the WH10480-1 be spliced into existing trolling motor wiring?\u003c\/strong\u003e Yes, its 6 inch, 8 gauge leads have butt connectors attached specifically so it can be spliced into an existing trolling motor circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the WH10480-1 plug?\u003c\/strong\u003e The WH10480-1 is manufactured by Sierra.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988459335899,"sku":"SIE-WH10480-1","price":15.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sie-wh10480_lg__08417.1558131761.500.750.jpg?v=1785188015"},{"product_id":"sierra-wh10530-1-trolling-motor-socket-motor-side-12-volt-8-gauge-mates-with-boat-side-plug-wh10480-1","title":"Sierra Trolling Motor Socket WH10530-1, Motor Side Female Connector, 24 Volt","description":"\u003cp\u003eThe Sierra WH10530-1 is a 24 Volt female trolling motor socket built for the motor side of the connection between a boat's wiring and its trolling motor. It is designed to pair with the WH10540-1 harness, letting boaters make a clean, quick-disconnect electrical joint on 24 Volt trolling motor setups rather than hard-wiring the motor permanently into the boat's electrical system.\u003c\/p\u003e\u003cp\u003eEach WH10530-1 comes with a 6 inch lead of 8 gauge wire fitted with butt connectors, so it can be crimped directly onto the existing motor-side wiring during installation or replacement. The housing is molded from durable plastic to withstand a marine environment. Because this socket is the female, motor-side half of the connection, it is intended to mate with its corresponding boat-side plug and harness rather than be used as a standalone part.\u003c\/p\u003e\u003cp\u003eThis socket is a straightforward way to add a disconnect point to a 24 Volt trolling motor wiring circuit, whether during a new installation or when repairing worn or damaged wiring at the motor end. Confirm your system is wired for 24 Volts and is set up to use the WH10540-1 harness before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e WH10530-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 24 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Gender:\u003c\/strong\u003e Female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Side:\u003c\/strong\u003e Motor Side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 8 Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Lead Length:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Style:\u003c\/strong\u003e Butt Connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Harness:\u003c\/strong\u003e WH10540-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.27 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the Sierra WH10530-1 trolling motor socket rated for?\u003c\/strong\u003e The WH10530-1 is rated for 24 Volt trolling motor systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WH10530-1 a motor-side or boat-side connector?\u003c\/strong\u003e WH10530-1 is the female, motor-side connector in the trolling motor wiring circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat harness does the WH10530-1 socket pair with?\u003c\/strong\u003e This socket is designed for use with the WH10540-1 harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire gauge and lead length does the WH10530-1 come with?\u003c\/strong\u003e It comes with a 6 inch lead of 8 gauge wire fitted with butt connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WH10530-1 a male or female connector?\u003c\/strong\u003e It is a female connector, made to mate with the corresponding male boat-side plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the WH10530-1 socket made of?\u003c\/strong\u003e The WH10530-1 housing is made of plastic, suited for marine wiring applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the WH10530-1 weigh?\u003c\/strong\u003e The WH10530-1 trolling motor socket weighs 0.27 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the WH10530-1 be used on a 12 Volt trolling motor system?\u003c\/strong\u003e No, the WH10530-1 is rated for 24 Volt systems, not 12 Volt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the WH10530-1 installed?\u003c\/strong\u003e The included butt connectors on its 6 inch, 8 gauge lead are crimped onto the existing motor-side wiring to install it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the WH10530-1 trolling motor socket?\u003c\/strong\u003e The WH10530-1 is made by Sierra.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the WH10530-1 include the mating boat-side plug?\u003c\/strong\u003e No, WH10530-1 is the motor-side socket only and pairs with a separate boat-side connection through the WH10540-1 harness.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988459434203,"sku":"SIE-WH10530-1","price":17.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sie-wh10530_lg_1__14050.1558170975.500.750.jpg?v=1785188900"},{"product_id":"sierra-wh10490-1-boat-side-trolling-motor-socket-12-volt-6-in-10-gauge-female-connector-with-butt-connectors-mates-with-wh10480-1","title":"Sierra Female Boat Side Trolling Motor Socket WH10490-1, 12 Volt, Pack of 100, Use with WH10480-1","description":"\u003cp\u003eThe Sierra WH10490-1 is a 12 Volt female boat-side trolling motor socket, sold in a pack of 100. It is the female half of a two-piece trolling motor wiring connection, designed to be permanently wired into the boat's power circuit so the trolling motor's mating plug can be quickly connected or disconnected at the transom or bow mount. Each socket comes pre-fitted with a 6 inch length of 10 gauge wire terminated with butt connectors, making it a drop-in splice point for connecting to the boat's existing 10 gauge power leads without additional crimping hardware beyond the supplied connectors.\u003c\/p\u003e\u003cp\u003eThis socket is designed for use with the Sierra WH10480-1 mating plug, which forms the male side of the same 12 Volt connection. Because trolling motor plug-and-socket sets are voltage-specific, it is important to pair the WH10490-1 socket only with 12 Volt components; a separate 24 Volt socket and plug set exists under different part numbers for 24 Volt trolling motor systems. Sold in bulk packs of 100, this item is intended for boat builders, dealers, and service shops wiring or rewiring multiple trolling motor circuits.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e WH10490-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Female Boat Side Trolling Motor Socket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 10 gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Butt connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Mating Plug:\u003c\/strong\u003e WH10480-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Pack of 100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.26 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282359973\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 12 Volt trolling motor wiring circuits using the Sierra WH10480-1 mating plug.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the WH10490-1 trolling motor socket rated for?\u003c\/strong\u003e The WH10490-1 is a 12 Volt trolling motor socket, designed for use only in 12 Volt trolling motor wiring circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich plug does this socket connect to?\u003c\/strong\u003e This female boat-side socket is designed for use with the Sierra WH10480-1 mating plug, the male half of the same 12 Volt connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the male or female half of the connector?\u003c\/strong\u003e The WH10490-1 is the female boat-side socket, meant to be wired into the boat while the WH10480-1 provides the male mating plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire gauge and length does the WH10490-1 come with?\u003c\/strong\u003e Each WH10490-1 socket comes with a 6 inch length of 10 gauge wire, already terminated with butt connectors for splicing into an existing circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the WH10490-1 include connectors for wiring?\u003c\/strong\u003e Yes, butt connectors are already attached to the 6 inch, 10 gauge wire lead on each WH10490-1 socket, so no separate crimp connectors are needed for that splice point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many sockets come in a pack?\u003c\/strong\u003e The WH10490-1 is sold in a pack of 100 units, making it suited to bulk wiring jobs or dealer and service shop stock rather than single-unit repairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the WH10490-1 pack weigh?\u003c\/strong\u003e A pack of WH10490-1 trolling motor sockets weighs 0.26 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the WH10490-1 be used on a 24 Volt trolling motor system?\u003c\/strong\u003e No, the WH10490-1 is a 12 Volt socket and should not be used on 24 Volt trolling motor systems, which require a separate 24 Volt socket and plug set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WH10490-1 the male or the boat-side connector?\u003c\/strong\u003e It is labeled as the female boat side connector, intended to be wired into the boat's power circuit rather than into the trolling motor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre OEM cross-reference numbers available for the WH10490-1?\u003c\/strong\u003e No OEM replacement or cross-reference numbers are listed for the WH10490-1 trolling motor socket.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988459466971,"sku":"SIE-WH10490-1","price":23.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-WH10490-1__92452.1780061502.500.750.jpg?v=1785329159"},{"product_id":"sierra-wh10470-1-trolling-motor-socket-boat-side-12v-2-wire-with-butt-connectors-mates-with-wh10540-1-motor-side-plug","title":"Sierra WH10470-1 Female Boat Side 12V Trolling Motor Socket, Use with WH10520-1","description":"\u003cp\u003eThe Sierra WH10470-1 is a female boat side trolling motor socket built for 12 volt trolling motor wiring setups. It comes pre-wired with a 6 inch length of 8 gauge wire fitted with butt connectors, making it a straightforward drop-in replacement when rewiring the boat side connection of a trolling motor circuit. The socket accepts the matching male plug on the motor side, letting the trolling motor be quickly connected and disconnected from the boat's power wiring without re-splicing every time the motor is removed.\u003c\/p\u003e\u003cp\u003eConstructed with metal contacts in a black housing, the socket is designed to handle the current draw of a 12 volt trolling motor circuit while resisting the corrosion and vibration common in marine environments. Because it is the boat side (female) half of the connection, it is intended to be used together with the matching WH10470-1 wiring, and Sierra specifies pairing it with the WH10520-1 for a complete boat side and motor side connection set. This makes it a practical choice for boat owners rewiring a damaged trolling motor plug, upgrading old or corroded wiring, or building a new trolling motor power connection from scratch.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e WH10470-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Female Boat Side Trolling Motor Socket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 8 gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Style:\u003c\/strong\u003e Butt connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Gender:\u003c\/strong\u003e Female (boat side)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompanion Part:\u003c\/strong\u003e Use with WH10520-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Salt water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.21 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra WH10470-1 used for?\u003c\/strong\u003e The WH10470-1 is a female boat side trolling motor socket used to wire the boat side connection point of a 12 volt trolling motor circuit, letting the motor plug in and unplug without re-splicing wires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WH10470-1 the male or female connector?\u003c\/strong\u003e It is the female connector, designated as the boat side half of the plug and socket pair, not the motor side male plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the WH10470-1 rated for?\u003c\/strong\u003e This socket is rated for 12 volt trolling motor systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire is included with the WH10470-1?\u003c\/strong\u003e It ships with 6 inches of 8 gauge wire already fitted with butt connectors, ready to be spliced into the existing trolling motor wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat part should the WH10470-1 be paired with?\u003c\/strong\u003e Sierra specifies using the WH10470-1 boat side socket together with the WH10520-1 to complete the trolling motor wiring connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the WH10470-1 socket made from?\u003c\/strong\u003e The WH10470-1 uses metal contacts housed in a black connector body designed for marine electrical use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many sockets come in one pack?\u003c\/strong\u003e The WH10470-1 is sold as a single unit, one socket per pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the WH10470-1 be used in salt water applications?\u003c\/strong\u003e Yes, the WH10470-1 is intended for salt water use as part of a 12 volt trolling motor wiring circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the WH10470-1 require soldering to install?\u003c\/strong\u003e No soldering is required; the WH10470-1 comes with butt connectors on its 8 gauge wire lead for a crimp connection into the existing trolling motor wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the WH10470-1 weigh?\u003c\/strong\u003e The Sierra WH10470-1 trolling motor socket weighs 0.21 pounds.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988459532507,"sku":"SIE-WH10470-1","price":19.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sie-wh10470_lg__42628.1653310953.500.750.jpg?v=1785188615"},{"product_id":"sierra-wh10500-1-trolling-motor-plug-motor-side-male-24v-10-gauge-with-butt-connectors-mates-with-wh10600-1-boat-side-socket","title":"Sierra Trolling Motor Plug WH10500-1, 24V Male Motor-Side Connector, Replaces WH10490-1","description":"\u003cp\u003eThe Sierra WH10500-1 is a 24 volt, male, motor-side trolling motor plug built to connect your trolling motor's power leads to the boat-side wiring harness. It comes with a 6 inch, 10 gauge wire fitted with butt connectors, so it splices directly onto existing motor wiring without additional adapters. The plug is constructed of aluminum for durable, corrosion-resistant electrical contact, and it is rated for use in saltwater applications. WH10500-1 mates with the WH10600-1 trolling motor socket to complete the connection between the motor and the boat's power supply. It is a direct equivalent to OEM part number WH10490-1, making it a straightforward replacement when the original motor-side plug fails or needs to be rewired. As with all Sierra products, it is backed by Sierra's limited warranty. Because trolling motor plugs are voltage- and gauge-specific, confirm that your system runs on 24 volts before ordering; Sierra also offers a separate 12 volt motor-side\/boat-side plug and socket pair (WH10610-1 and WH10612-1) for 12 volt setups, which use a different gauge wire and are not interchangeable with the WH10500-1.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e WH10500-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trolling Motor Plug, Motor Side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Gender:\u003c\/strong\u003e Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 24 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 10 Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Butt Connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.26 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Salt Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282359980\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Mating Socket:\u003c\/strong\u003e WH10600-1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUse with WH10600-1 trolling motor socket.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eWH10490-1\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra WH10500-1 used for?\u003c\/strong\u003e WH10500-1 is a male, motor-side trolling motor plug rated for 24 volts, used to connect a trolling motor's power leads to the boat's wiring harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs WH10500-1 the male or female half of the connector?\u003c\/strong\u003e WH10500-1 is the male, motor-side plug; it mates with the WH10600-1 socket on the boat side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes WH10500-1 replace OEM part WH10490-1?\u003c\/strong\u003e Yes, WH10500-1 is a direct equivalent to WH10490-1 and can be used in its place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire length and gauge does the WH10500-1 plug have?\u003c\/strong\u003e It has a 6 inch wire in 10 gauge, fitted with butt connectors for splicing onto existing trolling motor wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the WH10500-1 plug made of?\u003c\/strong\u003e It is made of aluminum, chosen for reliable electrical contact and resistance to corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the WH10500-1 plug be used in saltwater?\u003c\/strong\u003e Yes, the WH10500-1 24V motor-side plug is recommended for use in saltwater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat socket does the WH10500-1 plug connect to?\u003c\/strong\u003e WH10500-1 is designed for use with the WH10600-1 trolling motor socket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the WH10500-1 plug weigh?\u003c\/strong\u003e The WH10500-1 trolling motor plug weighs 0.26 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WH10500-1 the same as Sierra's 12 volt trolling motor plug?\u003c\/strong\u003e No, WH10500-1 is a 24 volt plug; Sierra's 12 volt motor-side and boat-side plugs (WH10610-1 and WH10612-1) are a separate, non-interchangeable pair with a different wire gauge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install the WH10500-1 plug?\u003c\/strong\u003e The WH10500-1 comes with a 6 inch, 10 gauge lead terminated in butt connectors, allowing it to be spliced directly onto the trolling motor's existing wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the WH10500-1 come with a warranty?\u003c\/strong\u003e Yes, the WH10500-1 is backed by Sierra's limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the WH10500-1?\u003c\/strong\u003e Each order includes one WH10500-1 male, motor-side, 24V trolling motor plug with its 6 inch lead and butt connectors.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988459565275,"sku":"SIE-WH10500-1","price":21.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sie-wh10500_lg__49112.1558131908.500.750.jpg?v=1785188642"},{"product_id":"sierra-wh10610-1-v-groove-male-boat-side-trolling-motor-plug-12v-two-6in-8-gauge-leads-with-butt-connectors","title":"Sierra WH10610-1 V-Groove Male Boat Side Trolling Motor Plug, 12 Volt, Use with WH10600-1 Socket","description":"\u003cp\u003eThe Sierra WH10610-1 is a V-Groove male boat side trolling motor plug rated for 12 volt systems. It is the boat-side half of a two-piece trolling motor electrical connection, designed to be wired into the boat's onboard power leads so the trolling motor can be quickly connected and disconnected without splicing wires each time the motor is mounted or removed. The plug comes with two 6 inch, 8 gauge wire leads already fitted with butt connectors, so it can be spliced directly into the existing boat wiring using a standard crimp tool.\u003c\/p\u003e\u003cp\u003eThis plug is the male, boat-side connector and is designed to mate with Sierra's WH10600-1 V-Groove female motor side trolling motor socket, which is sold separately and mounts on the trolling motor itself. Together the two halves form a keyed V-groove connection that only fits together one way, preventing reversed polarity when reconnecting the motor. The plug body is molded from durable plastic and rubber for use in a wet marine environment, and is finished in black.\u003c\/p\u003e\u003cp\u003eThis is a 12 volt rated connector intended for single-battery trolling motor setups. Boaters use it when rigging a new trolling motor power connection or replacing a worn or damaged boat-side plug on an existing setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e WH10610-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Style:\u003c\/strong\u003e V-Groove Male, Boat Side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 8 gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Termination:\u003c\/strong\u003e Butt connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMating Component:\u003c\/strong\u003e WH10600-1 V-Groove female motor side trolling motor socket (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic, Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Plug-In Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.31 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282360061\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Uses:\u003c\/strong\u003e Fishing, Boating\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal 12 volt trolling motor boat-side wiring connection; pairs specifically with the Sierra WH10600-1 female motor side socket.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra WH10610-1 used for?\u003c\/strong\u003e The Sierra WH10610-1 is a V-Groove male trolling motor plug that gets wired into the boat side of a 12 volt trolling motor power connection, letting the motor be plugged in or unplugged without splicing wires each time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WH10610-1 the male or female connector?\u003c\/strong\u003e WH10610-1 is the male, boat side connector. It mates with the separately sold Sierra WH10600-1, which is the V-Groove female motor side socket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the WH10610-1 rated for?\u003c\/strong\u003e This plug is rated for 12 volt trolling motor systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire comes attached to the WH10610-1?\u003c\/strong\u003e Two 6 inch, 8 gauge wire leads with butt connectors already installed are included, ready to be spliced into the boat's existing wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the WH10610-1 made of?\u003c\/strong\u003e The plug body is made of plastic and rubber and is finished in black, suited for exposure to a wet marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the WH10610-1 weigh?\u003c\/strong\u003e The Sierra WH10610-1 trolling motor plug weighs 0.31 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the WH10610-1 come with the matching socket?\u003c\/strong\u003e No. The WH10610-1 is only the male boat side plug; the mating WH10600-1 female motor side socket is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the WH10610-1 be connected backwards?\u003c\/strong\u003e The V-Groove keyed shape of the WH10610-1 is designed to mate with its WH10600-1 counterpart in only one orientation, which helps prevent a reversed connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install the WH10610-1?\u003c\/strong\u003e The 6 inch, 8 gauge lead wires on the WH10610-1 are fitted with butt connectors, so installation is done by crimping them onto the boat's existing power wiring with a standard crimp tool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the warranty on the WH10610-1?\u003c\/strong\u003e The Sierra WH10610-1 is covered by a 90 day warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WH10610-1 genuine Sierra or aftermarket?\u003c\/strong\u003e WH10610-1 is a genuine Sierra part number, not an aftermarket equivalent.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988459598043,"sku":"SIE-WH10610-1","price":22.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/WH10610-1__96601.1737885324.500.750.jpg?v=1785189211"},{"product_id":"sierra-wh10550-1-female-motor-side-trolling-motor-connector-24v-8-gauge-wire-with-butt-connectors-mates-with-wh10540-1-boat-side-plug","title":"Sierra WH10550-1 Female Motor Side Trolling Motor Socket, 24 Volt, Use with WH10540-1 Male Plug","description":"\u003cp\u003eThe Sierra WH10550-1 is a 24 Volt female, motor-side trolling motor socket designed to complete the wiring connection between a trolling motor and its power plug. It is built to pair with Sierra's WH10540-1 male boat-side trolling motor plug (sold separately), giving anglers and boaters a clean, weatherworthy disconnect point in the trolling motor's power circuit. The socket comes with two 6 inch, 8 gauge wire leads fitted with butt connectors, so it can be spliced directly into existing motor wiring without needing to source separate connectors or wire.\u003c\/p\u003e\u003cp\u003eConstruction features a machined exterior for a precise, durable fit at the connection point, and the socket is rated specifically for 24 Volt trolling motor systems. It is a universal-fit part, meaning it is not tied to a specific motor make, model, or year, and works anywhere a compatible 24 Volt motor-side socket connection is needed. For high-volume installers or rebuilders, Sierra also offers this same socket in a bulk package of 100 under part number WH10552, while WH10550-1 is the standard individually packaged part. As a genuine Sierra part, it is backed by Sierra's warranty coverage.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e WH10550-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Female Motor Side Trolling Motor Socket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 24 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 8 Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 6 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Butt Connectors Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompanion Part:\u003c\/strong\u003e WH10540-1 Male Boat Side Trolling Motor Plug (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Package Option:\u003c\/strong\u003e WH10552 (Package of 100)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.36875 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282360047\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the Sierra WH10550-1 trolling motor socket rated for?\u003c\/strong\u003e The WH10550-1 is rated for 24 Volt trolling motor systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WH10550-1 a male or female connector?\u003c\/strong\u003e It is a female, motor-side trolling motor socket, meaning it connects on the motor side of the wiring circuit rather than the boat side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat part does the WH10550-1 pair with?\u003c\/strong\u003e It is designed to be used with Sierra's WH10540-1 male boat-side trolling motor plug, which is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire comes attached to the WH10550-1 socket?\u003c\/strong\u003e Two 6 inch, 8 gauge wire leads are included, already fitted with butt connectors for splicing into existing motor wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to buy separate butt connectors for this socket?\u003c\/strong\u003e No, butt connectors are already included on the WH10550-1's wire leads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WH10550-1 sold individually or in bulk?\u003c\/strong\u003e WH10550-1 is the standard individually packaged version of this socket; Sierra also offers the same connector in a bulk package of 100 under part number WH10552.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the WH10550-1 socket made of?\u003c\/strong\u003e The connector has a machined exterior construction for a precise fit at the electrical connection point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is the WH10550-1 connector?\u003c\/strong\u003e The socket measures 0.39 x 0.39 x 0.39 inches and weighs 0.36875 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the WH10550-1 fit any trolling motor?\u003c\/strong\u003e Yes, the WH10550-1 is a universal-fit 24 Volt motor-side socket and is not limited to a specific motor make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the WH10550-1?\u003c\/strong\u003e Each WH10550-1 order includes one female motor-side trolling motor socket with its two attached 6 inch, 8 gauge wire leads and butt connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WH10550-1 a genuine Sierra part?\u003c\/strong\u003e Yes, the WH10550-1 is a genuine Sierra part and is backed by Sierra's warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC should I use to order the WH10550-1?\u003c\/strong\u003e The Sierra WH10550-1 trolling motor socket carries UPC 808282360047.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988459630811,"sku":"SIE-WH10550-1","price":21.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sie-wh10550_lg__19045.1558171135.500.750.jpg?v=1785187981"},{"product_id":"sierra-wh10600-1-v-groove-female-motor-side-trolling-motor-socket-12-volt-6-inch-8-gauge-wires-with-butt-connectors","title":"Sierra WH10600-1 V-Groove Female Trolling Motor Socket, Motor Side, 12 Volt, Use with WH10610-1","description":"\u003cp\u003eThe Sierra WH10600-1 is a 12 volt V-groove female motor-side trolling motor socket, designed to be the motor-side half of a quick-disconnect wiring set for electric trolling motors. It arrives with two 6 inch, 8 gauge wire leads with butt connectors already installed, so it wires directly into the trolling motor's power leads without additional splicing. The V-groove female socket is built for a side-mount installation and is suitable for saltwater use, making it a practical choice for anglers who need a reliable, corrosion-resistant connection point on their trolling motor.\u003c\/p\u003e\u003cp\u003eThis socket is intended to be used together with the Sierra WH10610-1 V-groove male boat-side trolling motor plug, which is sold separately and mounts on the boat-side wiring. Together, the two parts create a quick-connect and quick-disconnect point between the boat's wiring and the trolling motor, letting the motor be removed or swapped without cutting or re-splicing wires. Each WH10600-1 is sold individually and is backed by Sierra's warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e WH10600-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e V-Groove Female Motor Side Trolling Motor Socket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Leads:\u003c\/strong\u003e 6 inch, 8 gauge wire with butt connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse With:\u003c\/strong\u003e Sierra WH10610-1 V-Groove Male Boat Side Trolling Motor Plug (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Side Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Saltwater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282360054\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003ePairs with the Sierra WH10610-1 V-groove male boat-side trolling motor plug to complete a 12 volt trolling motor quick-disconnect connection.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra WH10600-1 used for?\u003c\/strong\u003e The WH10600-1 is a 12 volt V-groove female motor-side trolling motor socket that connects to the trolling motor's power leads and mates with a matching boat-side plug to form a quick-disconnect wiring connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WH10600-1 a 12 volt or 24 volt connector?\u003c\/strong\u003e The WH10600-1 is rated 12 volt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire gauge and length does the WH10600-1 come with?\u003c\/strong\u003e It comes with two 6 inch leads of 8 gauge wire, each with a butt connector already installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the WH10600-1 include the male plug that connects to it?\u003c\/strong\u003e No. The WH10600-1 is only the female motor-side socket; it is designed to be used with the Sierra WH10610-1 V-groove male boat-side trolling motor plug, which is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the motor-side and boat-side connectors?\u003c\/strong\u003e The WH10600-1 is the female motor-side socket that wires to the trolling motor, while the WH10610-1 is the male boat-side plug that wires to the boat; the two mate together to form the quick-disconnect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the WH10600-1 be used in saltwater?\u003c\/strong\u003e Yes, the WH10600-1 is recommended for saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the WH10600-1 weigh?\u003c\/strong\u003e The WH10600-1 weighs 0.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the WH10600-1 mounted?\u003c\/strong\u003e It is a side-mount connector, installed on the side of the trolling motor housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WH10600-1 genuine Sierra brand?\u003c\/strong\u003e Yes, the WH10600-1 is a genuine Sierra part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the WH10600-1?\u003c\/strong\u003e The WH10600-1 is backed by Sierra's limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many WH10600-1 sockets do I need per trolling motor?\u003c\/strong\u003e One WH10600-1 female motor-side socket pairs with one WH10610-1 male boat-side plug to complete a single trolling motor connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra WH10600-1?\u003c\/strong\u003e The UPC for the Sierra WH10600-1 trolling motor socket is 808282360054.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988459696347,"sku":"SIE-WH10600-1","price":19.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/WH10600-1__18131.1722504335.500.750.jpg?v=1785189133"},{"product_id":"sea-dog-403020-1-double-gang-wall-switch-panel-304-stainless-steel-2-spdt-switches-12vdc-15a","title":"Sea-Dog Double Gang Wall Switch Panel 403020-1 - 304 Stainless Steel, 12V, 2 SPDT Switches","description":"\u003cp\u003eThe Sea-Dog 403020-1 is a double gang wall switch panel built for marine electrical systems that need two independent switch positions in one clean housing. It carries two black SPDT (single pole, double throw) switches, each rated for 12VDC at 15 amps, giving you two separate on-off controls for lighting, pumps, fans, or other 12-volt accessories from a single mounting plate. The panel itself is constructed of stamped 304 stainless steel, a corrosion-resistant material suited to the saltwater and high-humidity conditions found on boats, where standard plastic or painted-steel hardware tends to corrode or discolor over time.\u003c\/p\u003e\u003cp\u003eThe panel measures 2 inches by 2-1\/2 inches by 1 inch, a compact footprint that fits into helm stations, cabin walls, and equipment panels without requiring a large cutout. It installs using two #6 RH fasteners (fasteners not included), so you will need to have these on hand or match them to your existing panel hardware. Because it is a double gang design, it is intended for installers who need to consolidate two switch functions into one panel opening rather than running two single-switch units side by side. This is a wall-mount unit, not a wired switch assembly with pre-terminated leads, so wiring is completed at installation to suit the specific 12-volt circuit being controlled.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 403020-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Switches:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e SPDT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 2-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 15 Amps per switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Stainless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #6 RH (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Dimensions (A x B x C):\u003c\/strong\u003e 2 inches x 2-1\/2 inches x 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Wall Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514403122\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many switches does the Sea-Dog 403020-1 wall panel have?\u003c\/strong\u003e The Sea-Dog 403020-1 is a double gang panel with two separate black SPDT switches, letting you control two 12-volt circuits from one mounting location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the voltage and amperage rating of this switch panel?\u003c\/strong\u003e Each switch on the 403020-1 is rated 12VDC at 15 amps, so the panel supports two independent 12-volt circuits up to 15 amps each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 403020-1 panel made of?\u003c\/strong\u003e It is made of stamped 304 stainless steel, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this panel suitable for saltwater boat use?\u003c\/strong\u003e Yes, the 304 stainless steel construction of the 403020-1 is corrosion resistant, making it appropriate for saltwater marine installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 403020-1 wall switch panel?\u003c\/strong\u003e The panel measures 2 inches by 2-1\/2 inches by 1 inch, a compact size designed to fit standard small switch cutouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 403020-1 weigh?\u003c\/strong\u003e This wall switch panel weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install this switch panel?\u003c\/strong\u003e The 403020-1 mounts with two #6 RH fasteners, which are not included and must be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of switches are used on this panel?\u003c\/strong\u003e Both switches are SPDT (single pole, double throw) type, wired for 2-way circuit control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a single or double switch panel?\u003c\/strong\u003e The 403020-1 is the double switch (double gang) version, featuring two switches; a single switch version is available as a different part number for installations that only need one switch position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 403020-1 include any wiring or connectors?\u003c\/strong\u003e No, the panel is supplied as the switch unit itself; wiring and fasteners for mounting are not included and are completed during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the panel have?\u003c\/strong\u003e The 403020-1 has a stainless finish over its stamped 304 stainless steel body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 403020-1?\u003c\/strong\u003e The UPC for the Sea-Dog 403020-1 double gang wall switch panel is 035514403122.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988770435291,"sku":"S-D-403020-1","price":14.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7150.jpg?v=1784429072"},{"product_id":"sea-dog-403010-1-single-switch-wall-panel-304-stainless-steel-marine-spdt-toggle-switch-12vdc-15a","title":"Sea-Dog Stainless Steel Wall Switch Panel 403010-1, Single SPDT Toggle Switch, 12V 15 Amp","description":"\u003cp\u003eThe Sea-Dog 403010-1 is a single-switch wall panel built for onboard electrical circuits that need a compact, corrosion resistant control point. It is constructed of stamped 304 stainless steel, giving it the durability to hold up in a marine environment where moisture and salt air quickly degrade lesser materials. The panel carries one black SPDT toggle switch rated 12VDC at 15 amps, making it suitable for switching lighting, pumps, and other 12-volt accessories from a single, clearly labeled point on a helm or cabin wall.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the panel mounts with two #6 RH fasteners (fasteners are not included, so have your own on hand before installing). Its compact footprint measures 2 inches by 2-1\/2 inches by 1 inch, keeping the installation cutout small and making it easy to fit into tight helm or console layouts. For installations that require switching two separate circuits from one panel, Sea-Dog also offers a two-switch version, part number 403020-1, which shares the same stainless steel construction and mounting style.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 403010-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Wall Switch Panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Switches:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e SPDT Toggle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 15 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Stainless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (A x B x C):\u003c\/strong\u003e 2 inches x 2-1\/2 inches x 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #6 RH, 2 required (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514403115\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 403010-1?\u003c\/strong\u003e The 403010-1 is a single-switch wall panel from Sea-Dog, built from stamped 304 stainless steel and fitted with one black SPDT toggle switch rated 12VDC at 15 amps for onboard electrical circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 403010-1 made of stainless steel?\u003c\/strong\u003e Yes, the panel is constructed of stamped 304 stainless steel for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and amperage is the switch rated for?\u003c\/strong\u003e The switch on the 403010-1 panel is rated 12VDC at 15 amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many switches does this panel have?\u003c\/strong\u003e The 403010-1 has one SPDT toggle switch; a two-switch version is available separately as part number 403020-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install the 403010-1?\u003c\/strong\u003e Installation requires two #6 RH fasteners, which are not included with the 403010-1 panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 403010-1 wall switch panel?\u003c\/strong\u003e The panel measures 2 inches by 2-1\/2 inches by 1 inch (A x B x C dimensions).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 403010-1 weigh?\u003c\/strong\u003e The 403010-1 wall switch panel weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a two-switch version of this panel?\u003c\/strong\u003e Yes, Sea-Dog offers a two-switch panel, part number 403020-1, built with the same stainless steel construction as the single-switch 403010-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of switch is used on the 403010-1?\u003c\/strong\u003e A black SPDT toggle switch is used on the 403010-1 panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 403010-1 hold up to saltwater exposure?\u003c\/strong\u003e Yes, it is made of corrosion resistant stamped 304 stainless steel, which is well suited to marine and saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 403010-1 come with mounting hardware?\u003c\/strong\u003e No, the #6 RH fasteners needed for mounting the 403010-1 are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 403010-1 a single-gang or double-gang switch panel?\u003c\/strong\u003e The 403010-1 is a single-gang panel with one switch; the double-gang, two-switch equivalent is part number 403020-1.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988771320027,"sku":"S-D-403010-1","price":11.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7150_c5114818-e8b9-45b4-bcad-d2f11035f62b.jpg?v=1784429082"},{"product_id":"sea-dog-415110-1-marine-battery-terminal-covers-red-black-pair-1-2-post-4-2-1-gauge-cable-uscg-abyc-compliant","title":"Sea-Dog Battery Terminal Covers 415110-1, 1\/2 Inch Stud, Red\/Black Pair, 4-2-1 Gauge Cable","description":"\u003cp\u003eThe Sea-Dog 415110-1 Battery Terminal Covers insulate integral marine wing nut battery terminals to protect cables and connections from corrosion and accidental shorting. Molded from injection molded PVC, this red and black pair is color coded so you can identify positive and negative terminals at a glance and avoid polarity misidentification during installation or maintenance. Each cover measures 1\/2 inch at the stud opening, with an overall footprint of 1-5\/8 inches by 1-11\/16 inches by 2-7\/8 inches, sized for cable gauges 4, 2, and 1. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals, making them a straightforward way to bring a battery bank up to code. They are designed to fit most marine batteries as well as automotive batteries fitted with add-on marine terminals, so they work equally well on boats, RVs, and other 12 volt DC applications using standard wing nut terminal posts. Sold as a matched red and black pair, they are packaged for easy replacement or for outfitting a new battery installation. Whether you are winterizing, rewiring a battery box, or simply replacing cracked or missing terminal covers, the 415110-1 offers a durable, corrosion resistant solution built to marine standards.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 415110-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded PVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\/Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Gauge Compatibility:\u003c\/strong\u003e 4, 2, 1 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A (Stud Opening):\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 2-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 pairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e Meets USCG and ABYC requirements for prevention of accidental grounding of battery terminals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits most marine batteries as well as automotive batteries fitted with add-on marine terminals, using integral wing nut terminal posts sized for 4, 2, and 1 gauge cable.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size battery terminals does the Sea-Dog 415110-1 fit?\u003c\/strong\u003e The 415110-1 fits terminal studs with a 1\/2 inch opening and covers cable gauges 4, 2, and 1, with an overall size of 1-5\/8 inches by 1-11\/16 inches by 2-7\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these terminal covers sold as a pair?\u003c\/strong\u003e Yes, the 415110-1 is sold as a red and black pair, one cover for the positive terminal and one for the negative terminal, packaged 5 pairs to a standard pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the Sea-Dog 415110-1 covers made from?\u003c\/strong\u003e They are made from injection molded PVC, chosen for its resistance to corrosion and its ability to insulate battery terminal connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these covers meet USCG or ABYC standards?\u003c\/strong\u003e Yes, the Sea-Dog 415110-1 Battery Terminal Covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 415110-1 fit automotive batteries?\u003c\/strong\u003e It will fit most marine batteries as well as automotive batteries that have add-on marine terminals installed on the posts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are the covers colored red and black?\u003c\/strong\u003e The red and black coloring on the 415110-1 pair is a color coding system that helps prevent polarity misidentification when connecting or servicing battery terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 415110-1 weigh?\u003c\/strong\u003e The pair of terminal covers weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any tools to install the 415110-1 terminal covers?\u003c\/strong\u003e No tools are required; these covers snap over integral wing nut terminals on the battery post to insulate the connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 415110-1 and the smaller Sea-Dog terminal covers like 415111 or 415112?\u003c\/strong\u003e The 415110-1 is a red\/black pair sized for 4, 2, 1 gauge cable with a 1\/2 inch stud opening, while 415111 and 415112 are single-color covers (red or black) rather than a matched pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 415110-1?\u003c\/strong\u003e Each order includes one red and one black injection molded PVC terminal cover, sized for a 1\/2 inch stud, sold in packs of 5 pairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 415110-1 covers be used on both battery terminals of a standard marine battery?\u003c\/strong\u003e Yes, since they are sold as a matched red and black pair, one 415110-1 cover insulates the positive terminal and the other insulates the negative terminal on a standard 2-post marine battery.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988771942619,"sku":"S-D-415110-1","price":6.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8074.jpg?v=1784429118"},{"product_id":"sea-dog-415210-1-wing-nut-style-battery-terminal-set-positive-negative-die-cast-lead","title":"Sea-Dog Wing Nut Style Battery Terminal Set, Positive and Negative, Die Cast Lead","description":"\u003cp\u003eThe Sea-Dog Wing Nut Style Battery Terminal Set (415210-1) converts standard battery posts to stud connectors, letting you disconnect a marine battery quickly without tools. The set includes one positive and one negative terminal, each cast from die cast lead for corrosion resistance and reliable conductivity in a marine electrical environment. Each terminal is polarity specific to meet USCG regulations, so the positive and negative terminals are sized differently and cannot be mixed up during installation. The wing nut design allows the connection to be tightened by hand and released quickly in an emergency or for battery maintenance, without needing a wrench. This set is sold as a display packed pair (one positive, one negative) and is intended as a direct upgrade or replacement for standard battery post clamps on boats and other marine applications where quick-disconnect capability is desired.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 415210-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Positive\/Negative Set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Wing Nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Lead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2-5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 5\/8 inch (positive) \/ 9\/16 inch (negative)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 3\/8 inch (positive) \/ 5\/16 inch (negative)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.72 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 sets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolarity Compliance:\u003c\/strong\u003e USCG regulations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for standard battery posts using wing nut style stud terminals; not specific to a single make or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sea-Dog 415210-1 battery terminal set include?\u003c\/strong\u003e The 415210-1 set includes one positive and one negative wing nut style battery terminal, sold together as a display packed pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are these battery terminals made from?\u003c\/strong\u003e Sea-Dog part 415210-1 is constructed of die cast lead for corrosion resistance and reliable electrical conductivity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the positive and negative terminals in this set be mixed up?\u003c\/strong\u003e No. Each terminal in the 415210-1 set is polarity specific to meet USCG regulations, with different dimensions for the positive and negative sides, so they cannot be installed in the wrong position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 415210-1 terminals?\u003c\/strong\u003e The set measures 2-5\/16 inches at dimension A, 5\/16 inches at dimension C, with the positive terminal at 5\/8 inch (B) and 3\/8 inch (D), and the negative terminal at 9\/16 inch (B) and 5\/16 inch (D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 415210-1 battery terminal set weigh?\u003c\/strong\u003e The 415210-1 positive\/negative set weighs 0.72 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a wing nut style battery terminal used for?\u003c\/strong\u003e A wing nut style battery terminal converts a standard battery post into a stud connector, allowing wires to be attached with a nut and permitting quick disconnection from the battery without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these terminals sold individually or as a pair?\u003c\/strong\u003e The 415210-1 is sold as a set containing both a positive and a negative terminal; Sea-Dog also offers the negative terminal alone (415211-1) and the positive terminal alone (415212-1) as separate parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these battery terminals meet any regulatory standard?\u003c\/strong\u003e Yes, the Sea-Dog 415210-1 terminals are polarity specific to meet USCG regulations for marine battery connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are these terminals packaged?\u003c\/strong\u003e The 415210-1 positive\/negative set is display packed, with a standard pack quantity of 10 sets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this product safe to handle without precautions?\u003c\/strong\u003e The 415210-1 battery terminal set carries a Proposition 65 warning for cancer and reproductive harm due to its die cast lead construction, so care should be taken when handling it.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988772040923,"sku":"S-D-415210-1","price":10.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4975.jpg?v=1784429124"},{"product_id":"sea-dog-420102-1-momentary-toggle-switch-spst-on-off-15a-12v-marine-panel-switch","title":"Sea-Dog 420102-1 SPST Momentary On\/Off Toggle Switch, 15 Amp 12 Volt, Brass\/Nylon\/Polycarbonate","description":"\u003cp\u003eThe Sea-Dog 420102-1 is a water resistant SPST momentary on\/off toggle switch built for marine electrical panels. It uses a locking ring with a lever seal and a protruding cap nut for a secure, water resistant panel mount, and is constructed of stamped brass, injection molded nylon, and polycarbonate for corrosion resistance in a marine environment. The switch is rated 15 Amps at 12 Volts DC and terminates in 2 spade blade terminals for simple wiring to bilge pumps, horns, winches, and other momentary-duty accessories where the circuit needs to stay on only while the switch is held. Its compact panel footprint (3\/8 inch by 1\/2 inch) makes it easy to fit into existing helm and console layouts alongside other Sea-Dog toggle switches. A matching waterproof cap is available separately for additional protection when the switch is not in use. This is a single switch, sold each, and is part of the same Sea-Dog toggle switch family that also includes standard on\/off, DPDT, and illuminated variants sharing the same mounting dimensions and terminal style.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420102-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e SPST\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Action:\u003c\/strong\u003e Momentary On\/Off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e 2 Blades\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 15 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped Brass, Injection Molded Nylon, Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e Spade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Protection Rating:\u003c\/strong\u003e IP20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514420778\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal panel mount toggle switch; fits any 12 Volt DC panel cutout sized for 3\/8 inch by 1\/2 inch toggle switches.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does momentary on\/off mean on the Sea-Dog 420102-1?\u003c\/strong\u003e The circuit is only closed while the toggle is held in the on position; release it and the 420102-1 springs back to off, unlike a standard SPST toggle that stays wherever you flip it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage and voltage is this toggle switch rated for?\u003c\/strong\u003e The 420102-1 is rated 15 Amps at 12 Volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size panel cutout does the 420102-1 need?\u003c\/strong\u003e It mounts in a panel hole sized for its 3\/8 inch by 1\/2 inch toggle body, the same footprint used across the Sea-Dog toggle switch line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 420102-1 made of?\u003c\/strong\u003e It is built from stamped brass, injection molded nylon, and polycarbonate, materials chosen for corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 420102-1 weigh?\u003c\/strong\u003e This toggle switch weighs 0.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 420102-1 waterproof?\u003c\/strong\u003e It is water resistant, using a locking ring with a lever seal and a protruding cap nut; a separate waterproof cap is available for added protection when extra sealing is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does the 420102-1 have?\u003c\/strong\u003e The 420102-1 has 2 spade blade terminals, consistent with its SPST circuit type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 420102-1 and the Sea-Dog 420101-1?\u003c\/strong\u003e Both are SPST panel mount toggles with the same 15 Amp, 12 Volt rating and 2 blade terminals, but the 420101-1 is a standard on\/off switch while the 420102-1 is momentary on\/off, returning to off when released.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a single switch or a multipack?\u003c\/strong\u003e The Sea-Dog 420102-1 is sold as a single toggle switch, each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 420102-1 toggle switch?\u003c\/strong\u003e The toggle handle on the 420102-1 is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the 420102-1 myself?\u003c\/strong\u003e Yes, it is designed for straightforward panel mounting with a locking ring and cap nut, and spade terminals for simple wire connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 420102-1 genuine Sea-Dog, not aftermarket?\u003c\/strong\u003e Yes, the 420102-1 is a genuine Sea-Dog part, identified by UPC 035514420778.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988772270299,"sku":"S-D-420102-1","price":7.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4976.jpg?v=1784429130"},{"product_id":"sea-dog-420101-1-spst-on-off-toggle-switch-water-resistant-15a-12v-marine-boat-switch","title":"Sea-Dog Toggle Switch 420101-1, SPST On\/Off, 15A 12V, Water Resistant Marine Switch","description":"\u003cp\u003eThe Sea-Dog 420101-1 is a water resistant SPST On\/Off toggle switch built for marine electrical panels where reliable, corrosion-resistant switching is a must. It uses a locking ring with a lever seal and a protruding cap nut to resist water penetration at the panel face, making it suitable for helm stations, consoles, and other exposed-to-spray locations aboard a boat. The switch is rated 15A at 12VDC, covering common marine circuits such as cabin lights, bilge pumps, accessories, and other single-pole on\/off applications.\u003c\/p\u003e\u003cp\u003eConstruction is stamped brass, injection molded nylon, and polycarbonate, giving the switch body and toggle strong resistance to moisture and everyday wear in a marine environment. It is a 2-blade SPST design, meaning it simply opens and closes a single circuit with no momentary or center-off function, and it mounts through a standard panel cutout using its threaded bushing and cap nut. Overall dimensions are 4.94 x 1.88 x 1.25 inches, and the switch weighs 0.056 pounds. This is a straightforward, drop-in replacement or new-install switch for boat owners and marine electricians wiring or upgrading a 12V DC panel.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420101-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit:\u003c\/strong\u003e SPST\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAction:\u003c\/strong\u003e On\/Off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e 2 Blades\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmps:\u003c\/strong\u003e 15A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolts:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped Brass, Injection Molded Nylon, Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 4.94 x 1.88 x 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.056 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514420754\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for standard marine panel cutouts on 12V DC electrical systems; no make\/model-specific fitment restrictions are specified.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat type of switch is the Sea-Dog 420101-1?\u003c\/strong\u003e It is an SPST On\/Off toggle switch, meaning it controls a single circuit with a simple on or off action and no momentary or center positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage and voltage rating?\u003c\/strong\u003e The 420101-1 toggle switch is rated 15A at 12V, suitable for standard 12V DC marine circuits like lighting, pumps, and accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this toggle switch waterproof?\u003c\/strong\u003e It is water resistant rather than fully submersible, using a locking ring with a lever seal and a protruding cap nut to resist water penetration at the panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 420101-1 made from?\u003c\/strong\u003e The switch is constructed of stamped brass, injection molded nylon, and polycarbonate for corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does this switch have?\u003c\/strong\u003e The 420101-1 has 2 blade terminals, consistent with its SPST On\/Off circuit design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this switch?\u003c\/strong\u003e The Sea-Dog toggle switch measures 4.94 x 1.88 x 1.25 inches overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the switch weigh?\u003c\/strong\u003e The 420101-1 weighs 0.056 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this switch fit any boat's electrical panel?\u003c\/strong\u003e Yes, the 420101-1 is a standard toggle switch designed to mount into a typical panel cutout on 12V DC marine electrical systems, with no make or model restrictions specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this switch and Sea-Dog's SPDT toggle switches?\u003c\/strong\u003e The 420101-1 is a single-pole (SPST) On\/Off switch with 2 blade terminals, while Sea-Dog's SPDT models are On\/Off\/On switches with 3 blade terminals for controlling two circuits or directions from one switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch include a mounting nut?\u003c\/strong\u003e The 420101-1 toggle switch has a protruding cap nut and locking ring built into its design for panel mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 420101-1 genuine Sea-Dog product?\u003c\/strong\u003e Yes, the 420101-1 is a genuine Sea-Dog branded marine toggle switch, not a generic aftermarket part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this switch?\u003c\/strong\u003e The Sea-Dog 420101-1 toggle switch carries UPC 035514420754.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988772532443,"sku":"S-D-420101-1","price":5.87,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4976_76405e68-c036-47f1-acbb-d29f4b05e643.jpg?v=1784429142"},{"product_id":"sea-dog-420103-1-dpdt-toggle-switch-on-off-on-15a-12v-water-resistant-marine-switch","title":"Sea-Dog Toggle Switch 420103-1, DPDT On\/Off\/On, 15 Amp 12 Volt Panel Mount","description":"\u003cp\u003eThe Sea-Dog 420103-1 is a water resistant DPDT toggle switch built for marine electrical panels where reliable on\/off\/on switching is needed in a wet environment. It uses a double-pole, double-throw (DPDT) circuit with an On\/Off\/On action, giving it 6 terminal blades so it can control two separate circuits from a single lever, such as switching a device between two power sources or reversing polarity on a device like a trim pump or windshield wiper motor.\u003c\/p\u003e\u003cp\u003eConstruction is stamped brass, injection molded nylon, and polycarbonate, and the switch is rated for 15 Amps at 12 Volts DC. Water resistance comes from a locking ring with a lever seal and a protruding cap nut, which also makes panel installation straightforward: the bushing measures 3\/8 inch (A) by 1\/2 inch (B) so it drops into a standard round toggle switch panel cutout. The lever seal keeps spray and splash out of the switch body, making it a good fit for helm panels, engine rooms, and other exposed mounting locations on a boat.\u003c\/p\u003e\u003cp\u003eThe 420103-1 ships as a panel mount switch with spade terminals for wiring. It is sold individually and is one of several circuit configurations in the Sea-Dog toggle switch line, so buyers who need a simple SPST on\/off or a momentary switch instead can select the matching part number in the same series.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420103-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Toggle Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit\/Action:\u003c\/strong\u003e DPDT, On\/Off\/On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e 6 blades, spade terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 15 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3\/8 inch (A) x 1\/2 inch (B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped brass, injection molded nylon, polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Protection Rating:\u003c\/strong\u003e IP20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514420792\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does DPDT On\/Off\/On mean on the Sea-Dog 420103-1?\u003c\/strong\u003e DPDT stands for double-pole, double-throw, meaning the 420103-1 switches two separate circuits at once, and On\/Off\/On means the lever has a center off position with an active on position on either side, using 6 terminal blades total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 420103-1 waterproof?\u003c\/strong\u003e The 420103-1 is water resistant, using a locking ring with a lever seal and a protruding cap nut to keep spray and splash out of the switch body, which suits helm panels and engine room mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage and voltage is this toggle switch rated for?\u003c\/strong\u003e The Sea-Dog 420103-1 is rated for 15 Amps at 12 Volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size panel cutout does the 420103-1 need?\u003c\/strong\u003e The switch bushing measures 3\/8 inch by 1\/2 inch, so it fits a standard round toggle switch panel cutout of that size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 420103-1 made of?\u003c\/strong\u003e It is constructed of stamped brass, injection molded nylon, and polycarbonate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 420103-1 weigh?\u003c\/strong\u003e The 420103-1 weighs 0.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of terminals does this switch use?\u003c\/strong\u003e The 420103-1 has 6 spade terminal blades to accommodate its DPDT On\/Off\/On wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 420103-1 come with a waterproof cap?\u003c\/strong\u003e No, the waterproof cap is a separate accessory sold under its own part number in the Sea-Dog toggle switch line; the 420103-1 itself is the switch only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog 420103-1 toggle switch?\u003c\/strong\u003e The 420103-1 has a black finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 420103-1 different from the Sea-Dog 420101-1 or 420108-1 switches?\u003c\/strong\u003e The 420103-1 is a DPDT On\/Off\/On switch with 6 terminal blades for controlling two circuits, while the 420101-1 is a simpler SPST On\/Off switch and the 420108-1 is an SPDT On\/Off\/On switch, each with fewer terminal blades for single-circuit control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 420103-1 a panel mount or surface mount switch?\u003c\/strong\u003e The 420103-1 is a panel mount toggle switch, installed through a round cutout using its threaded bushing and locking ring.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988773253339,"sku":"S-D-420103-1","price":8.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4976_0d8cdb8a-6f86-4571-9350-2f86279cc9dd.jpg?v=1784429150"},{"product_id":"sea-dog-420105-1-spdt-momentary-on-off-on-marine-toggle-switch-15a-12vdc-water-resistant-brass-3-blade","title":"Sea-Dog Toggle Switch 420105-1, SPDT Momentary On\/Off\/On, 15 Amp 12 Volt Panel Mount","description":"\u003cp\u003eThe Sea-Dog 420105-1 is a panel-mount toggle switch built for marine electrical circuits that need a momentary contact position. It is configured as SPDT Momentary On\/Off\/On with 3 blade terminals, rated 15 amps at 12 volts. The housing is constructed of stamped brass, injection molded nylon, and polycarbonate, and the switch uses a locking ring with a lever seal plus a protruding cap nut to resist water penetration, making it suitable for helm panels, accessory switching, and other 12 volt DC circuits aboard a boat. It mounts through a panel opening sized to the switch's 3\/8 inch and 1\/2 inch dimensions, and installs with standard blade-terminal wire connections at the back of the switch. This model is easy to install and is intended as a direct, drop-in style toggle switch for panels already cut for this switch pattern. A matching waterproof cap (sold separately as 420479-1) is available for additional splash protection at the switch face. Note that this is the non-illuminating version; Sea-Dog also offers illuminating toggle switches in the same physical style that light up red in the ON position, which are different part numbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420105-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e SPDT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Action:\u003c\/strong\u003e Momentary On\/Off\/On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e 3 Blades\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Rating:\u003c\/strong\u003e 15 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e 12 volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.058 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped brass, injection molded nylon, and polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation Resistance:\u003c\/strong\u003e 100 megaohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Quick connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514420839\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the circuit configuration of the Sea-Dog 420105-1 toggle switch?\u003c\/strong\u003e It is an SPDT (single pole, double throw) switch wired as Momentary On\/Off\/On, with 3 blade terminals for wiring connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage and voltage is this switch rated for?\u003c\/strong\u003e The Sea-Dog 420105-1 is rated 15 amps at 12 volts DC, suitable for typical marine 12 volt accessory and switching circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 420105-1 toggle switch waterproof?\u003c\/strong\u003e The switch uses a locking ring with a lever seal and a protruding cap nut to resist water penetration at the panel. A separate waterproof cap (Sea-Dog 420479-1) is also available for additional protection at the toggle itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 420105-1 made of?\u003c\/strong\u003e It is constructed of stamped brass, injection molded nylon, and polycarbonate, with brass contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this switch weigh?\u003c\/strong\u003e The Sea-Dog 420105-1 toggle switch weighs 0.058 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the mounting dimensions for panel installation?\u003c\/strong\u003e The 420105-1 has dimension A of 3\/8 inch and dimension B of 1\/2 inch for panel-mount installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 420105-1 differ from Sea-Dog's illuminating toggle switches?\u003c\/strong\u003e The 420105-1 is a non-illuminating switch. Sea-Dog's illuminating toggle switches, such as 420111, 420113, and 420118, share the same physical style but light up red when in the ON position; those are separate part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of terminals does this switch use?\u003c\/strong\u003e The Sea-Dog 420105-1 uses 3 blade terminals with a quick connect style, allowing standard blade-terminal wire connectors to be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this switch a momentary or standard on\/off switch?\u003c\/strong\u003e It is a momentary switch in the On\/Off\/On positions (Mom. On\/Off\/On), meaning one or both ON positions are spring-loaded to return to center when released, depending on wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the insulation resistance rating of the 420105-1?\u003c\/strong\u003e The Sea-Dog 420105-1 has an insulation resistance rating of 100 megaohms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 420105-1 toggle switch?\u003c\/strong\u003e The UPC for this Sea-Dog toggle switch is 035514420839.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988773318875,"sku":"S-D-420105-1","price":7.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4976_7df61b75-15c8-42d2-9a27-e7940d7b1d89.jpg?v=1784429156"},{"product_id":"sea-dog-420104-1-marine-toggle-switch-dpdt-momentary-on-off-momentary-on-15a-12v-6-blade-water-resistant-brass-panel-mount","title":"Sea-Dog 420104-1 DPDT Toggle Switch, Momentary On\/Off\/Momentary On, 15 Amp 12 Volt","description":"\u003cp\u003eThe Sea-Dog 420104-1 is a DPDT (double pole, double throw) toggle switch built for momentary on\/off\/momentary on circuit control, where the switch springs back to the center off position when released from either throw. This action makes it well suited for controlling functions that should only run while the toggle is actively held, such as trim, windlass direction, or other momentary-duty marine circuits, while still allowing a stable off position at center.\u003c\/p\u003e\u003cp\u003eThe switch is constructed of stamped brass, injection molded nylon, and polycarbonate for corrosion resistance in a marine environment. It is water resistant, featuring a locking ring with a lever seal and a protruding cap nut for a secure, sealed panel installation. The switch has 6 blade terminals and is rated for 15 amps at 12 volts DC, with terminal spacing of 3\/8 inch by 1\/2 inch. It panel mounts for a clean installation on a helm, console, or accessory panel.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420104-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e DPDT (Double Pole, Double Throw)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Action:\u003c\/strong\u003e Momentary On \/ Off \/ Momentary On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e 6 Blade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 15 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Spacing:\u003c\/strong\u003e 3\/8 inch x 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.066 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped Brass, Injection Molded Nylon, Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514420815\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat circuit action does the Sea-Dog 420104-1 toggle switch have?\u003c\/strong\u003e The Sea-Dog 420104-1 is a DPDT switch with a momentary on\/off\/momentary on action, meaning it springs back to the center off position when released from either throw direction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 420104-1 toggle switch waterproof?\u003c\/strong\u003e It is water resistant, using a locking ring with a lever seal and a protruding cap nut to seal the panel mount installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage and voltage is the Sea-Dog 420104-1 rated for?\u003c\/strong\u003e This switch is rated for 15 amps at 12 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does part number 420104-1 have?\u003c\/strong\u003e The 420104-1 has 6 blade terminals, consistent with its DPDT (double pole, double throw) design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 420104-1 toggle switch made from?\u003c\/strong\u003e It is constructed of stamped brass, injection molded nylon, and polycarbonate for corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 420104-1 switch mounted?\u003c\/strong\u003e The 420104-1 is a panel mount toggle switch with terminal spacing of 3\/8 inch by 1\/2 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 420104-1 switch weigh?\u003c\/strong\u003e The switch weighs 0.066 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 420104-1 and a standard on\/off\/on DPDT toggle switch?\u003c\/strong\u003e The 420104-1 uses a momentary on\/off\/momentary on action that springs back to center off, unlike a standard latching DPDT on\/off\/on switch that stays in whichever position it is thrown to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 420104-1 come with a waterproof cap?\u003c\/strong\u003e The listing for the Sea-Dog 420104-1 toggle switch is for the switch itself; a separate waterproof cap is available from Sea-Dog for added sealing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 420104-1 toggle switch?\u003c\/strong\u003e The UPC for the Sea-Dog 420104-1 toggle switch is 035514420815.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Sea-Dog 420104-1 be used for momentary-duty circuits like trim or windlass controls?\u003c\/strong\u003e Yes, its momentary on\/off\/momentary on DPDT action is designed for circuits that should only energize while the toggle is actively held in either direction.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988773384411,"sku":"S-D-420104-1","price":9.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4976_1efc7c4a-405f-4c6b-834c-2a50ff7307c5.jpg?v=1784429160"},{"product_id":"sea-dog-420108-1-spdt-on-off-on-marine-toggle-switch-15a-12v-dc-water-resistant-stamped-brass","title":"Sea-Dog SPDT On\/Off\/On Toggle Switch, 15 Amp 12 Volt Waterproof Marine Switch","description":"\u003cp\u003eThis Sea-Dog toggle switch is a water resistant SPDT On\/Off\/On switch built for marine electrical panels where reliable, corrosion-resistant switching is required. The three-position action lets you control two separate circuits from a single switch, or reverse a motor or accessory, making it a common choice for bilge pumps, trim tabs, navigation lights, and other 12 volt onboard equipment. It is rated for 15 amps at 12 volts DC and uses a 3-blade SPDT contact configuration.\u003c\/p\u003e\u003cp\u003eThe switch is constructed of stamped brass, injection molded nylon, and polycarbonate for durability in a marine environment. A locking ring with a lever seal helps resist water penetration around the mounting hole, and the protruding cap nut design makes the switch easy to grip and actuate even with wet or gloved hands. Terminals are sized at 3\/8 inch and 1\/2 inch for secure wire connection, and installation is straightforward for anyone rewiring or upgrading a helm or accessory panel.\u003c\/p\u003e\u003cp\u003eSea-Dog Line has manufactured marine hardware and electrical components since 1933, and this toggle switch is sold individually for boat builders, riggers, and DIY boat owners replacing a worn or failed switch or adding a new circuit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420108-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Toggle Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Action:\u003c\/strong\u003e On\/Off\/On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e SPDT (Single Pole Double Throw)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Blades:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 15 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Size A:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Size B:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped Brass, Injection Molded Nylon, Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.058 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514423205\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does SPDT On\/Off\/On mean on this switch?\u003c\/strong\u003e SPDT On\/Off\/On describes a single pole double throw contact with three positions: one energized position, a center off position, and a second energized position, so the Sea-Dog 420108-1 can control two separate circuits or two directions from one switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this toggle switch waterproof?\u003c\/strong\u003e The Sea-Dog 420108-1 is water resistant rather than fully submersible, using a locking ring with a lever seal around the mounting hole to resist water penetration in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage and voltage rating?\u003c\/strong\u003e This switch is rated for 15 amps at 12 volts DC, suitable for typical 12 volt marine circuits such as pumps, lights, and small accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat terminal size does this switch use?\u003c\/strong\u003e The Sea-Dog 420108-1 has 3\/8 inch and 1\/2 inch spade terminals for wire connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the switch made from?\u003c\/strong\u003e It is constructed of stamped brass, injection molded nylon, and polycarbonate, chosen for corrosion resistance in a marine setting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this switch weigh?\u003c\/strong\u003e The Sea-Dog 420108-1 toggle switch weighs 0.058 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch include an illuminated position indicator?\u003c\/strong\u003e No, the 420108-1 is a standard (non-illuminating) toggle switch; it does not light up in any position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this switch reverse a motor, such as a trim tab or windlass?\u003c\/strong\u003e Yes, because the On\/Off\/On SPDT action provides two separate energized positions, it is commonly used to reverse small 12 volt motors or control two circuits from a single switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog part?\u003c\/strong\u003e Yes, this is a genuine Sea-Dog toggle switch, part number 420108-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this switch mounted?\u003c\/strong\u003e The 420108-1 is a surface mount toggle switch installed through a panel hole and secured with its locking ring and cap nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Sea-Dog 420108-1 toggle switch has UPC 035514423205.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988773417179,"sku":"S-D-420108-1","price":6.52,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4976_470b9535-8c0b-4798-90a1-5aaf1f6b5e85.jpg?v=1784429163"},{"product_id":"sea-dog-420109-1-spdt-momentary-toggle-switch-mom-on-off-mom-on-15a-12v-water-resistant-marine-switch","title":"Sea-Dog 420109-1 SPDT Momentary On\/Off\/Momentary On Toggle Switch, 15 Amp 12 Volt","description":"\u003cp\u003eThe Sea-Dog 420109-1 is a water-resistant toggle switch built for marine electrical panels where reliable momentary control is needed. It is wired SPDT (single-pole, double-throw) with a Momentary On\/Off\/Momentary On circuit across 3 blades, meaning the toggle springs back to the center off position when released from either direction rather than latching on. This makes it well suited for applications like trim tabs, windlass controls, horns, or other functions that should only run while the switch is actively held.\u003c\/p\u003e\u003cp\u003eConstruction is stamped brass, injection molded nylon, and polycarbonate, with a locking ring and lever seal designed to resist water penetration at the panel mount, protecting the switch body from spray and splash in a marine environment. The switch is rated 15 Amps at 12 Volts DC and uses 3\/8 inch and 1\/2 inch terminal dimensions for easy wiring with standard connectors.\u003c\/p\u003e\u003cp\u003eSea-Dog backs the 420109-1 with a 90 day warranty. It is sold as a single switch and is a direct fit anywhere a 420109-1 momentary on\/off\/momentary on toggle switch is specified.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420109-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e SPDT Momentary On\/Off\/Momentary On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlades:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 15 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Dimensions (A x B):\u003c\/strong\u003e 3\/8 inch x 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Quick Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped brass, injection molded nylon, polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.058 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514423212\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat circuit type is the Sea-Dog 420109-1 wired for?\u003c\/strong\u003e The 420109-1 is an SPDT switch wired Momentary On\/Off\/Momentary On, so it springs back to the center off position when released from either direction rather than staying latched on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this toggle switch illuminated?\u003c\/strong\u003e No, the 420109-1 is not an illuminating switch. It is a standard, non-lit toggle with a momentary on\/off\/momentary on action.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage and voltage is the 420109-1 rated for?\u003c\/strong\u003e It is rated 15 Amps at 12 Volts DC, matching typical 12V marine electrical circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 420109-1 toggle switch made of?\u003c\/strong\u003e Construction is stamped brass, injection molded nylon, and polycarbonate, giving the switch a water-resistant, corrosion-resistant build for marine panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 420109-1 sealed against water?\u003c\/strong\u003e A locking ring with a lever seal is used at the panel mount to resist water penetration around the toggle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat terminal size does the 420109-1 use?\u003c\/strong\u003e The switch uses 3\/8 inch and 1\/2 inch terminal dimensions, sized for standard quick-connect wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many blades does the 420109-1 have?\u003c\/strong\u003e The Sea-Dog 420109-1 has 3 blades as part of its SPDT circuit design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a good application for a momentary on\/off\/momentary on switch like the 420109-1?\u003c\/strong\u003e This action suits controls that should only run while actively held, such as trim tab, windlass, or horn circuits, since the toggle returns to off on its own when released.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 420109-1 come with a warranty?\u003c\/strong\u003e Yes, Sea-Dog backs the 420109-1 toggle switch with a 90 day warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the Sea-Dog 420109-1?\u003c\/strong\u003e The 420109-1 toggle switch weighs 0.058 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 420109-1 different from Sea-Dog's illuminating toggle switches?\u003c\/strong\u003e The 420109-1 is a non-illuminating toggle, while Sea-Dog's illuminating toggle switch line lights up red in the on position; the 420109-1 does not have that lit indicator.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988773449947,"sku":"S-D-420109-1","price":7.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4976_2c7a74ae-111f-4f06-80cb-31d413040d0e.jpg?v=1784429164"},{"product_id":"sea-dog-420118-1-spdt-illuminating-toggle-switch-on-off-on-15a-12v-marine-panel-mount","title":"Sea-Dog 420118-1 Illuminating Toggle Switch, SPDT On\/Off\/On, 15 Amp 12 Volt","description":"\u003cp\u003eThe Sea-Dog 420118-1 is an illuminating toggle switch built for marine electrical panels where visibility and water resistance matter. It uses an SPDT (single pole, double throw) circuit with an On\/Off\/On action, giving it three switch positions for controlling two separate circuits from one switch. The toggle lights up red when the switch is in the ON position, making it easy to confirm at a glance that a circuit is live, even in low-light conditions at the helm.\u003c\/p\u003e\u003cp\u003eConstruction is stamped brass and injection molded nylon, with a polycarbonate toggle lever. A locking ring and lever seal help resist water penetration, which is important for switches mounted on an open helm or in a cockpit where spray and moisture are a constant. The switch terminates in four 1\/4 inch spade (quick connect) blade terminals, so wiring in or replacing an existing switch is straightforward without soldering.\u003c\/p\u003e\u003cp\u003eThis switch is rated 15 Amps at 12 Volts DC. It is designed to fit panels up to 1\/4 inch thick and requires a 15\/32 inch mounting hole. Its compact panel footprint and standard spade terminals make it a straightforward drop-in for boat dash panels, helm stations, and accessory switch panels that call for an illuminated SPDT On\/Off\/On toggle switch.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420118-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e SPDT (Single Pole, Double Throw)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Action:\u003c\/strong\u003e On\/Off\/On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e 4 Blades (1\/4 inch spade, quick connect)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 15 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIllumination:\u003c\/strong\u003e Illuminates red in the ON position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Size:\u003c\/strong\u003e 15\/32 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Panel Thickness:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped brass, injection molded nylon, polycarbonate toggle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.062 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does SPDT On\/Off\/On mean on this switch?\u003c\/strong\u003e SPDT stands for single pole, double throw, meaning the Sea-Dog 420118-1 has three positions (On\/Off\/On) and can direct power to two different circuits from a single switch, one circuit at a time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the toggle light up?\u003c\/strong\u003e Yes, the 420118-1 illuminates red when the toggle is switched to the ON position, so you can see its status at a glance on a panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole does this switch need?\u003c\/strong\u003e The Sea-Dog 420118-1 requires a 15\/32 inch mounting hole and fits panels up to 1\/4 inch thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage and voltage is this switch rated for?\u003c\/strong\u003e It is rated 15 Amps at 12 Volts DC, suitable for typical marine 12 volt accessory and lighting circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of terminals does the 420118-1 use?\u003c\/strong\u003e It has 4 blade terminals using 1\/4 inch spade (quick connect) style connections, allowing wiring without soldering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this switch water resistant?\u003c\/strong\u003e The switch includes a locking ring and lever seal designed to resist water penetration, which helps it hold up in exposed marine helm and cockpit locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the toggle switch made of?\u003c\/strong\u003e The Sea-Dog 420118-1 is constructed of stamped brass and injection molded nylon, with a polycarbonate toggle lever.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this switch weigh?\u003c\/strong\u003e The 420118-1 toggle switch weighs 0.062 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 420118-1 different from the 420118 non-illuminating version?\u003c\/strong\u003e The 420118-1 is the illuminating variant of the SPDT On\/Off\/On toggle switch line, lighting up red when in the ON position, while sharing the same 15 Amp, 12 Volt, 4-blade terminal specifications as other switches in the family.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the dimensions A and B on this switch?\u003c\/strong\u003e The Sea-Dog 420118-1 has a Dimension A of 3\/8 inch and a Dimension B of 1\/2 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this switch be used to control two separate circuits?\u003c\/strong\u003e Yes, because it is SPDT with an On\/Off\/On action, the 420118-1 can switch power between two different circuits depending on toggle position.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988773482715,"sku":"S-D-420118-1","price":8.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4978.jpg?v=1784429170"},{"product_id":"sea-dog-420111-1-illuminating-toggle-switch-spst-on-off-15a-12v-dc-red-lit-marine-panel-switch","title":"Sea-Dog 420111-1 Illuminating Toggle Switch, SPST On\/Off, 15 Amp 12 Volt","description":"\u003cp\u003eThe Sea-Dog 420111-1 is an illuminating toggle switch built for marine electrical panels where a quick visual confirmation of power status matters. The switch is an SPST design with a simple On\/Off action, using 3 spade blade terminals for a fast, solderless connection. When switched to the ON position, the toggle illuminates red, giving an unmistakable indication at a glance that the circuit is live, which is especially useful at the helm or on a dash panel in low light.\u003c\/p\u003e\u003cp\u003eConstruction is stamped brass and injection molded nylon, with a polycarbonate toggle lever. A locking ring and lever seal are built in to resist water penetration, making the switch suitable for the wet, vibration-prone environment found on boats. The switch is rated 15 Amps at 12 Volts DC, and terminates with 1\/4 inch spade connectors for easy wiring.\u003c\/p\u003e\u003cp\u003eFor installation, the 420111-1 fits panels up to 1\/4 inch thick and requires a 15\/32 inch mounting hole. It is designed as a direct panel-mount replacement switch for helm stations, accessory circuits, lighting, bilge pumps, and other 12 volt DC onboard systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420111-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Illuminating Toggle Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e SPST\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Action:\u003c\/strong\u003e On\/Off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIllumination:\u003c\/strong\u003e Illuminates red in the ON position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e 3 spade blades, 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Rating:\u003c\/strong\u003e 15 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped brass, injection molded nylon, polycarbonate toggle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance Features:\u003c\/strong\u003e Locking ring and lever seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Panel Thickness:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired Mounting Hole:\u003c\/strong\u003e 15\/32 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal panel-mount toggle switch for 12 volt DC marine electrical systems; not specific to a single engine, make, or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e702378\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat circuit type is the Sea-Dog 420111-1 toggle switch?\u003c\/strong\u003e It is an SPST (single pole, single throw) switch with a simple On\/Off action, part number 420111-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch light up?\u003c\/strong\u003e Yes, the 420111-1 illuminates red when it is switched to the ON position, giving a clear visual indication that the circuit is live.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage and voltage rating?\u003c\/strong\u003e The Sea-Dog 420111-1 is rated 15 Amps at 12 Volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat panel thickness and mounting hole does it require?\u003c\/strong\u003e The switch fits panels up to 1\/4 inch thick and requires a 15\/32 inch mounting hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat terminals does the 420111-1 use?\u003c\/strong\u003e It has 3 spade blade terminals sized at 1\/4 inch, allowing quick solderless wiring connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this switch water resistant?\u003c\/strong\u003e The 420111-1 has a locking ring and lever seal designed to resist water penetration, suiting it to marine panel environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials is the switch made from?\u003c\/strong\u003e Construction is stamped brass and injection molded nylon, with a polycarbonate toggle lever.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 420111-1 weigh?\u003c\/strong\u003e The Sea-Dog 420111-1 toggle switch weighs 0.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent part number for the 420111-1?\u003c\/strong\u003e Yes, part number 702378 is listed as an equivalent for the Sea-Dog 420111-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this switch fit a specific boat make or engine model?\u003c\/strong\u003e The 420111-1 is a universal panel-mount toggle switch for 12 volt DC marine electrical systems and is not limited to a specific make, model, or engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 420111-1 and the DPDT or SPDT versions Sea-Dog makes?\u003c\/strong\u003e The 420111-1 is the SPST On\/Off version; Sea-Dog also offers a DPDT On\/Off\/On version (420113-1) and an SPDT On\/Off\/On version (420118-1) in the same illuminating toggle switch line, each with a different terminal count.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the 420111-1?\u003c\/strong\u003e Each Sea-Dog 420111-1 order includes one illuminating SPST toggle switch.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988773548251,"sku":"S-D-420111-1","price":7.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4978_a11e1ea2-9c9f-451f-b79a-9ce4abb51cf1.jpg?v=1784429177"},{"product_id":"sea-dog-420123-1-light-tip-toggle-switch-spdt-on-off-on-15a-12v-illuminated-marine-switch","title":"Sea-Dog Light Tip Toggle Switch 420123-1, SPDT On\/Off\/On, 15 Amp 12 Volt Marine Switch","description":"\u003cp\u003eThe Sea-Dog Light Tip Toggle Switch, part number 420123-1, is a marine-grade SPDT On\/Off\/On toggle switch built for 12-volt boat wiring and helm panels. It uses a lighted toggle tip that glows white when the switch is in the OFF position and turns red when switched ON, giving an instant visual indication of circuit status even in low light or at night. The switch is constructed of stamped brass and injection molded nylon with a polycarbonate toggle lever, materials chosen to hold up in the marine environment. A locking ring and lever seal help resist water penetration around the mounting point, an important feature for switches mounted on exposed panels or near the helm where spray is common.\u003c\/p\u003e\u003cp\u003eThis is an SPDT (single pole, double throw) On\/Off\/On switch with 5 blade terminals, rated 15 Amps at 12 Volts DC. It installs through a 15\/32 inch mounting hole and fits panels up to 1\/4 inch thick, making it a straightforward retrofit or new-install switch for dash panels, accessory circuits, bilge pumps, lighting, and other 12-volt boat systems wired through a standard toggle-style panel cutout.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420123-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit\/Action:\u003c\/strong\u003e SPDT On\/Off\/On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e 5 Blades\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 15 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole (A):\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Cutout\/Bushing (B):\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Panel Thickness:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 15\/32 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped brass and injection molded nylon with polycarbonate toggle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndicator:\u003c\/strong\u003e Lighted tip, white when OFF, red when ON\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing:\u003c\/strong\u003e Locking ring and lever seal resist water penetration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.062 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the light on this switch indicate?\u003c\/strong\u003e On the Sea-Dog 420123-1 toggle switch, the toggle tip glows white when the switch is in the OFF position and turns red when the switch is ON, giving a quick visual check of circuit status.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 420123-1 an SPDT or SPST switch?\u003c\/strong\u003e It is an SPDT (single pole, double throw) switch with an On\/Off\/On circuit action and 5 blade terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage and voltage is this switch rated for?\u003c\/strong\u003e The 420123-1 is rated 15 Amps at 12 Volts DC, suitable for standard 12-volt marine circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole do I need to install this switch?\u003c\/strong\u003e A 15\/32 inch mounting hole is required to install the Sea-Dog 420123-1 toggle switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum panel thickness this switch will fit?\u003c\/strong\u003e The switch fits panels up to 1\/4 inch thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the switch body made of?\u003c\/strong\u003e The 420123-1 is constructed of stamped brass and injection molded nylon, with a polycarbonate toggle lever.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this toggle switch water resistant?\u003c\/strong\u003e Yes, a locking ring and lever seal on the 420123-1 help resist water penetration at the panel mount, which suits it for exposed helm or deck panel locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this switch weigh?\u003c\/strong\u003e The Sea-Dog 420123-1 toggle switch weighs 0.062 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does this switch have?\u003c\/strong\u003e It has 5 blade terminals, matching its SPDT On\/Off\/On circuit configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 420123-1 and Sea-Dog's other lighted toggle switches in this series?\u003c\/strong\u003e The 420123-1 is the SPDT On\/Off\/On version; other part numbers in Sea-Dog's Light Tip series cover different circuit actions such as SPST On\/Off, SPST momentary, and DPDT configurations, each with its own part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this switch be used for accessory or bilge pump wiring on a boat?\u003c\/strong\u003e Yes, rated at 15 Amps and 12 Volts DC, the 420123-1 is sized for typical 12-volt boat accessory circuits wired through a standard toggle-style panel cutout.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988773679323,"sku":"S-D-420123-1","price":21.87,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4979.jpg?v=1784429183"},{"product_id":"sea-dog-420121-1-lighted-tip-spst-on-off-toggle-switch-15a-12v-marine-panel-switch-white-red-lit-bat","title":"Sea-Dog Light Tip Toggle Switch 420121-1, SPST On\/Off, 15 Amp 12 Volt","description":"\u003cp\u003eThe Sea-Dog Light Tip Toggle Switch is an SPST On\/Off toggle switch built for marine electrical panels where visibility at the helm matters. The toggle bat is lighted, glowing white when the switch is in the OFF position and red when switched ON, so the operator can identify circuit status at a glance even in low light. Construction is stamped brass and injection molded nylon with a polycarbonate toggle, and the switch uses a locking ring with a lever seal to resist water penetration, making it suitable for boat helms, dashboards, and other panel applications exposed to moisture and spray.\u003c\/p\u003e\u003cp\u003eThis switch is rated 15 Amps at 12 Volts and terminates on 4 quick-connect blade terminals for straightforward wiring. It mounts in a 15\/32 inch hole and fits panels up to 1\/4 inch thick, with an overall footprint of 3\/8 inch by 1\/2 inch. Installation is a simple drop-in through the panel cutout, secured with the included locking ring. The 420121-1 is the SPST On\/Off version within the Sea-Dog Light Tip Toggle Switch line, which also includes momentary and SPDT\/DPDT circuit variants for different switching needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420121-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e SPST On\/Off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e 4 Blades\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Rating:\u003c\/strong\u003e 15 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.062 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped Brass\/Injection Molded Nylon\/Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Size:\u003c\/strong\u003e 15\/32 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Panel Thickness:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToggle Light Color (Off):\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToggle Light Color (On):\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514420006\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat circuit type is the Sea-Dog 420121-1?\u003c\/strong\u003e The 420121-1 is an SPST On\/Off switch, meaning it is a simple single-pole single-throw toggle that opens or closes one circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage and voltage is this switch rated for?\u003c\/strong\u003e It is rated 15 Amps at 12 Volts DC, suitable for standard 12-volt marine and automotive circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the toggle light up different colors?\u003c\/strong\u003e The lighted tip on the 420121-1 glows white when the switch is in the OFF position and red when it is switched ON, giving a quick visual check of circuit status.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mounting hole size for this switch?\u003c\/strong\u003e The Sea-Dog 420121-1 requires a 15\/32 inch mounting hole and fits panels up to 1\/4 inch thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the physical dimensions of the switch?\u003c\/strong\u003e The 420121-1 measures 3\/8 inch by 1\/2 inch and weighs 0.062 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the switch made of?\u003c\/strong\u003e It is constructed of stamped brass and injection molded nylon, with a polycarbonate toggle bat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this switch water resistant?\u003c\/strong\u003e The 420121-1 uses a locking ring and lever seal designed to resist water penetration, making it suitable for marine panel and helm applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does this switch have?\u003c\/strong\u003e The Sea-Dog 420121-1 has 4 blade terminals for quick-connect wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 420121-1 installed?\u003c\/strong\u003e It installs through a 15\/32 inch panel cutout and is secured in place with its locking ring, making for straightforward panel mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 420121-1 differ from other switches in the Sea-Dog Light Tip line?\u003c\/strong\u003e The 420121-1 is the SPST On\/Off version; the same line also offers momentary On\/Off, SPDT On\/Off\/On, and DPDT circuit variants with different terminal counts and functions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 420121-1?\u003c\/strong\u003e The UPC for the Sea-Dog Light Tip Toggle Switch, part number 420121-1, is 035514420006.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988773712091,"sku":"S-D-420121-1","price":20.02,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4979_10c4d88f-1e49-4b77-ba71-82b95d6cb93b.jpg?v=1784429184"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/51tJ56ESqNL.jpg?v=1785357495","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-electrical-system.oembed?page=11","provider":"Good Vibes Marina","version":"1.0","type":"link"}