{"title":"Raw Water Strainers","description":null,"products":[{"product_id":"perko-0493dp799m-spare-gasket-kit-for-1-and-1-1-4-intake-water-strainer-cork","title":"Perko 0493DP799M Cork Spare Gasket Kit for 1 Inch and 1-1\/4 Inch Intake Water Strainers","description":"\u003cp\u003eThe Perko 0493DP799M is a spare gasket kit built for Perko intake water strainers in the 1 inch and 1-1\/4 inch pipe size range. This kit supplies the cork gaskets used to seal the strainer's clear polymer cylinder and cast bronze cover against the bronze body, restoring a tight seal after routine maintenance or when the original gaskets have hardened or worn out from age and exposure to raw water.\u003c\/p\u003e\u003cp\u003ePerko intake water strainers are designed for easy installation and cleaning, with mounting lugs cast into both sides for universal mounting, four outside tie rods, and a stainless steel strainer basket to minimize electrolysis. Hinged lugs on the cast bronze cover allow the strainer basket to be removed and cleaned without disturbing the plumbing, and a drain plug in the bottom casting lets sediment be drained out easily, including for winterizing. Keeping the sealing gaskets fresh is part of that maintenance routine, and the 0493DP799M kit is the correct spare part for restoring those seals.\u003c\/p\u003e\u003cp\u003eThis kit is made of cork, the same material used in the original strainer assembly, and is sized to fit the 1 inch and 1-1\/4 inch pipe size versions of the Perko intake strainer line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0493DP799M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Spare Gasket Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cork\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Pipe Size:\u003c\/strong\u003e 1 inch and 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226338755\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits Perko intake water strainers sized for 1 inch and 1-1\/4 inch pipe\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat pipe sizes does the Perko 0493DP799M gasket kit fit?\u003c\/strong\u003e The 0493DP799M kit fits Perko intake water strainers sized for 1 inch and 1-1\/4 inch pipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the gaskets made of?\u003c\/strong\u003e The Perko 0493DP799M gasket kit is made of cork.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete strainer or just the gaskets?\u003c\/strong\u003e This is a gasket kit only, not a complete strainer -- the 0493DP799M supplies the spare cork gaskets used to reseal an existing Perko intake water strainer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen would I need to replace the gaskets on my intake strainer?\u003c\/strong\u003e Cork gaskets on a Perko intake water strainer can harden or wear out over time from exposure to raw water, and the 0493DP799M kit provides fresh replacements to restore a proper seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the strainer these gaskets fit have a removable basket?\u003c\/strong\u003e Yes, the Perko intake strainer that the 0493DP799M gaskets are used on has hinged lugs on the cast bronze cover that allow the stainless steel strainer basket to be removed for cleaning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a drain feature on the strainer this kit services?\u003c\/strong\u003e The Perko intake water strainer this gasket kit fits has a drain plug in the bottom casting for removing sediment and draining the unit, including for winterizing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the strainer basket made of on the compatible unit?\u003c\/strong\u003e The Perko intake water strainer compatible with the 0493DP799M gasket kit uses a stainless steel strainer basket to help minimize electrolysis.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 0493DP799M gasket kit a genuine Perko part?\u003c\/strong\u003e Yes, the 0493DP799M is a genuine Perko spare gasket kit made specifically for Perko intake water strainers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the gasket kit weigh?\u003c\/strong\u003e The Perko 0493DP799M gasket kit weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape are the gaskets in this kit?\u003c\/strong\u003e The gaskets included in the Perko 0493DP799M kit are round.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991103910107,"sku":"PKO-493DP799M","price":28.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-493DP799M__82852.1722505256.500.750.jpg?v=1785189117"},{"product_id":"perko-0493dp599m-spare-gasket-kit-for-1-2-and-3-4-intake-water-strainer-cork","title":"Perko 0493DP599M Spare Gasket Kit for 1\/2 Inch and 3\/4 Inch Intake Water Strainer, Cork","description":"\u003cp\u003eThe Perko 0493DP599M is a spare gasket kit for Perko intake water strainers, sized to fit 1\/2 inch and 3\/4 inch pipe size units. This is a gasket kit only, made from cork construction, intended to replace the seal between the cast bronze cover and body of the strainer housing on Perko's Fig. 0493 intake water strainer line.\u003c\/p\u003e\u003cp\u003ePerko intake water strainers are built for easy installation and cleaning, with mounting lugs cast into both sides for universal mounting, four outside tie rods, and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs on the cast bronze cover permit easy removal and cleaning of the strainer basket, and a drain plug in the bottom casting allows sediment to be removed and the unit drained for winterizing. Over time the cover gasket compresses and hardens, so keeping a cork spare gasket kit on hand lets an owner reseal the strainer cover during routine cleaning or winterizing without waiting on a special order.\u003c\/p\u003e\u003cp\u003eThis kit is sold as the gasket only, for use with Perko 1\/2 inch and 3\/4 inch intake water strainer units, and is identified by Perko part number 0493DP599M.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0493DP599M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Spare gasket kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cork\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Pipe Size:\u003c\/strong\u003e 1\/2 inch and 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Perko intake water strainer (cover gasket)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Gasket kit only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226338731\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat pipe sizes does the Perko 0493DP599M gasket kit fit?\u003c\/strong\u003e The Perko 0493DP599M gasket kit fits 1\/2 inch and 3\/4 inch pipe size intake water strainer units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 0493DP599M gasket made from?\u003c\/strong\u003e This gasket kit is made from cork construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 0493DP599M kit include the strainer basket or cover?\u003c\/strong\u003e No, the 0493DP599M is a gasket kit only and does not include the strainer basket, cylinder, or cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Perko 0493DP599M kit?\u003c\/strong\u003e The kit includes the replacement cork gasket for a Perko intake water strainer cover, and nothing else.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Perko strainer does the 0493DP599M gasket fit?\u003c\/strong\u003e It is the spare gasket for Perko intake water strainers sized for 1\/2 inch and 3\/4 inch pipe, matching Perko's Fig. 0493 strainer line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need a replacement gasket for my intake water strainer?\u003c\/strong\u003e The cover gasket on a Perko intake water strainer compresses and hardens over time and use, so a spare cork gasket like the 0493DP599M lets you reseal the cover during cleaning or winterizing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 0493DP599M gasket genuine Perko or aftermarket?\u003c\/strong\u003e It is a genuine Perko part, identified by Perko part number 0493DP599M.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow heavy is the 0493DP599M gasket kit?\u003c\/strong\u003e The Perko 0493DP599M gasket kit weighs 0.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this gasket when winterizing my boat?\u003c\/strong\u003e Yes, replacing the cover gasket with the 0493DP599M kit is a good step when cleaning or draining the strainer for winterizing, since the drain plug and cover are opened during that process.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the strainer basket need to be removed to replace the gasket?\u003c\/strong\u003e The cast bronze cover on a Perko intake water strainer has hinged lugs for easy removal, allowing access to fit the 0493DP599M gasket during cleaning of the strainer basket.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991103975643,"sku":"PKO-493DP599M","price":23.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/493DP599M__62721.1780061501.500.750.jpg?v=1785188144"},{"product_id":"groco-sa-1000-1-inch-npt-raw-water-strainer-bronze-with-stainless-steel-filter-basket","title":"Groco SA-1000 1 Inch NPT Raw Water Strainer, Bronze with Stainless Steel Filter Basket","description":"\u003cp\u003eThe Groco SA-1000 is a 1 inch NPT raw water strainer built to protect marine engines, generators, and AC units from debris in the cooling water supply. It is installed on the suction side of the pump to filter raw water before it reaches the engine's cooling system, helping prevent clogs and damage from sand, weeds, and other intake debris.\u003c\/p\u003e\u003cp\u003eThe strainer body is constructed of C84400 bronze for corrosion resistance in a marine environment, and it comes standard with a #304 stainless steel filter basket that catches debris while allowing water to flow freely. A crystal clear cast acrylic cylinder forms the strainer housing, giving a clear view of the basket and water flow so buildup can be spotted at a glance without disassembling the unit. Service is handled through a spin-off wingnut design, allowing the cylinder to be removed and the basket cleaned without tools.\u003c\/p\u003e\u003cp\u003eThe SA-1000 uses 1 inch NPT threaded connections and is sized per the manufacturer's dimensional diagram at 10.5 inches, 5.5 inches, 5 inches, and 2.8 inches across its reference points. It is a straightforward, serviceable strainer for boat owners who need reliable raw water filtration with easy visual inspection and quick cleaning.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SA-1000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Raw Water Strainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Construction:\u003c\/strong\u003e C84400 Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter Basket Material:\u003c\/strong\u003e #304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder Material:\u003c\/strong\u003e Crystal Clear Cast Acrylic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 10.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 2.8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 742985063235\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServiceability:\u003c\/strong\u003e Spin-off wingnut, no tools required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the thread size on the Groco SA-1000 raw water strainer?\u003c\/strong\u003e The Groco SA-1000 uses 1 inch NPT threaded connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the filter basket made of?\u003c\/strong\u003e The SA-1000 comes standard with a #304 stainless steel filter basket to catch debris in the raw water intake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the strainer body made of?\u003c\/strong\u003e The Groco SA-1000 body is constructed of C84400 bronze for corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I see the filter basket without opening the strainer?\u003c\/strong\u003e Yes, the SA-1000 uses a crystal clear cast acrylic cylinder as its housing, so the basket and water flow are visible without disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you clean or service the SA-1000 strainer?\u003c\/strong\u003e The Groco SA-1000 uses a spin-off wingnut design, so the acrylic cylinder can be removed by hand to access and clean the basket without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Groco SA-1000?\u003c\/strong\u003e Per Groco's dimensional diagram for the SA-1000, the reference measurements are 10.5 inches, 5.5 inches, 5 inches, and 2.8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SA-1000 weigh?\u003c\/strong\u003e The Groco SA-1000 raw water strainer weighs 7.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the SA-1000 installed?\u003c\/strong\u003e The SA-1000 is installed on the suction side of an engine or pump to filter raw water before it enters the cooling system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SA-1000 used for?\u003c\/strong\u003e It is a raw water strainer used to filter cooling water intake for marine engines, AC units, or generator sets, preventing debris from reaching the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Groco SA-1000 an OEM or genuine Groco part?\u003c\/strong\u003e The SA-1000 is a genuine Groco raw water strainer, not a generic aftermarket substitute.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49027994321115,"sku":"GRO-SA1000","price":690.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SA1000.1__26859.1722377856.500.750.jpg?v=1785164377"},{"product_id":"shurflo-1-2-inch-raw-water-strainer-with-50-mesh-screen-part-253-120-01","title":"Shurflo 1\/2 Inch Raw Water Strainer with 50 Mesh Screen - Part 253-120-01","description":"\u003cp\u003eThe Shurflo Raw Water Strainer is a 1\/2 inch inline strainer built to protect bait tanks, livewells, and washdown pumps from harmful debris before it reaches the pump head. A removable stainless steel screen with 50 mesh filtration catches sediment and particles, while a clear twist-off polyamide bowl lets you check the screen's condition at a glance without disassembling the line. An integral o-ring creates a tight seal at the bowl joint to eliminate leaks, and the housing is molded from rugged nylon for durability in a wet marine environment.\u003c\/p\u003e\u003cp\u003eThe strainer ships with (2) 1\/2 inch Barb x 1\/2 inch NPT fittings and (2) 3\/4 inch Barb x 1\/2 inch NPT fittings, giving you the port options needed to plumb it into common raw water lines. The screen slides out for quick cleaning, so buildup can be cleared in seconds and the strainer put right back into service. It is backed by a 1 year warranty and is intended to extend the working life of the pumps and components downstream of it by keeping harmful debris out of the water path.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 253-120-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Raw Water Strainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Size:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen Mesh Size:\u003c\/strong\u003e 50 mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBowl Material:\u003c\/strong\u003e Clear twist-off polyamide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Fittings:\u003c\/strong\u003e (2) 1\/2 inch Barb x 1\/2 inch NPT fittings and (2) 3\/4 inch Barb x 1\/2 inch NPT fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5 inches D x 3 inches W x 4 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Shurflo Raw Water Strainer 253-120-01?\u003c\/strong\u003e The Shurflo Raw Water Strainer, part number 253-120-01, is a 1\/2 inch strainer that comes with (2) 1\/2 inch Barb x 1\/2 inch NPT fittings and (2) 3\/4 inch Barb x 1\/2 inch NPT fittings for connecting to your existing plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mesh size is the screen in this strainer?\u003c\/strong\u003e It uses a 50 mesh stainless steel screen, fine enough to catch sediment and debris before it can reach and damage a connected pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I see when the strainer needs cleaning?\u003c\/strong\u003e Yes, the Shurflo 253-120-01 has a clear twist-off polyamide bowl, so you can visually check debris buildup on the screen without taking the unit apart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I clean the screen?\u003c\/strong\u003e Twist off the clear bowl, slide out the removable stainless steel screen, rinse away the debris, and reinsert the screen before twisting the bowl back into place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the strainer housing made of?\u003c\/strong\u003e The housing on the Shurflo Raw Water Strainer is rugged nylon, with a clear twist-off polyamide bowl for the removable screen section.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this strainer leak at the bowl joint?\u003c\/strong\u003e An integral o-ring seals the bowl to the housing on part 253-120-01, creating a tight seal to eliminate leaks at that joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat pumps or systems is this strainer used with?\u003c\/strong\u003e It is designed to protect bait tank, livewell, and washdown pumps from harmful debris by filtering the raw water before it reaches the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fittings are included with the strainer?\u003c\/strong\u003e The Shurflo 253-120-01 includes (2) 1\/2 inch Barb x 1\/2 inch NPT fittings and (2) 3\/4 inch Barb x 1\/2 inch NPT fittings, covering two common hose sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the strainer weigh?\u003c\/strong\u003e The Shurflo Raw Water Strainer weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this strainer?\u003c\/strong\u003e Part 253-120-01 measures 5 inches deep by 3 inches wide by 4 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on this strainer?\u003c\/strong\u003e Yes, the Shurflo Raw Water Strainer 253-120-01 is backed by a 1 year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use a raw water strainer at all?\u003c\/strong\u003e A raw water strainer like the Shurflo 253-120-01 keeps harmful debris out of downstream pumps and components, helping them last longer by preventing sediment and particles from causing wear or clogs.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49029558796507,"sku":"SHU-253-120-01","price":42.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/shu-253-120-01_lg__60442.1558174835.500.750.jpg?v=1785165652"},{"product_id":"groco-arg-1000-p-1-inch-raw-water-strainer-with-non-metallic-basket","title":"Groco ARG-1000-P 1 Inch Raw Water Strainer with Non-Metallic Basket","description":"\u003cp\u003eThe Groco ARG-1000-P is a 1 inch raw water strainer designed to protect engine cooling systems, air conditioning pumps, and other raw water intake circuits from debris, sand, weeds, and marine growth before it reaches sensitive pump impellers and heat exchangers. The strainer uses a non-metallic plastic basket that resists corrosion from saltwater and brackish water while providing a clear window for quick visual inspection of debris buildup. Its base mount design allows for secure, stationary installation in the engine compartment or bilge, keeping the strainer fixed in place while intake hose connections are made at the inlet and outlet ports. An adjustable feature on the housing allows the strainer body to be rotated for the most convenient hose routing angle without disconnecting the plumbing. Regular use of a raw water strainer like the ARG-1000-P helps prevent clogged impellers, overheating, and reduced water flow to onboard systems, making it a standard installation on boats that draw raw water for engine cooling or accessory pumps. The basket lifts out for easy cleaning and periodic inspection, and the see-through cover lets boaters check for debris without fully disassembling the unit. This strainer is built for 1 inch plumbing lines and is suitable for a wide range of raw water intake applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ARG-1000-P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Raw Water Strainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasket Material:\u003c\/strong\u003e Non-Metallic Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Base Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.21875 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 742985106888\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size plumbing does the Groco ARG-1000-P fit?\u003c\/strong\u003e The ARG-1000-P is a 1 inch raw water strainer, sized for 1 inch intake plumbing lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the basket made of?\u003c\/strong\u003e The basket in the ARG-1000-P is non-metallic plastic, which resists corrosion in saltwater and brackish water environments compared to a metal basket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the ARG-1000-P mounted?\u003c\/strong\u003e This strainer uses a base mount design, allowing it to be secured to a flat surface in the engine compartment or bilge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the strainer position be adjusted after installation?\u003c\/strong\u003e Yes, the ARG-1000-P has an adjustable feature that lets the housing be rotated for convenient hose routing without redoing the plumbing connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the ARG-1000-P weigh?\u003c\/strong\u003e The Groco ARG-1000-P weighs 6.21875 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this strainer?\u003c\/strong\u003e The UPC for the Groco ARG-1000-P is 742985106888.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the basket removable for cleaning?\u003c\/strong\u003e Yes, the non-metallic basket in the ARG-1000-P lifts out of the housing for cleaning and inspection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a raw water strainer like this protect?\u003c\/strong\u003e A raw water strainer such as the ARG-1000-P protects engine cooling systems and accessory pumps by filtering out debris, sand, and marine growth before it reaches the impeller or heat exchanger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ARG-1000-P have a see-through cover?\u003c\/strong\u003e The unit is designed with a cover that allows visual inspection of the basket for debris without full disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the ARG-1000-P strainer?\u003c\/strong\u003e The ARG-1000-P is manufactured by Groco.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49031095910619,"sku":"GRO-ARG-1000P","price":305.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61sgV7q-0jL.jpg?v=1785208656"},{"product_id":"groco-arg-1210-p-bronze-1-1-4-inch-raw-water-intake-strainer-with-plastic-basket","title":"Groco ARG-1210-P Bronze 1-1\/4 Inch Raw Water Intake Strainer with Plastic Basket","description":"\u003cp\u003eThe Groco ARG-1210-P is a bronze raw water intake strainer sized for 1-1\/4 inch thru-hull plumbing, built to protect a boat's raw water cooling and washdown systems from debris, weed, and sediment before it reaches the pump. The strainer uses a non-metallic, one-piece molded sight glass cap that magnifies the internal view of the basket, letting an owner check for blockage at a glance without disassembling the housing. Construction eliminates the tie rods and gaskets found on older strainer designs, relying instead on a molded cap that seals against the bronze body with O-rings on all joining surfaces for a reliable, leak-resistant seal.\u003c\/p\u003e\u003cp\u003eInside, an improved plastic poly filter basket traps debris while allowing full water flow to the pump. The basket lifts out for cleaning through a tool-free mounting system, so routine maintenance does not require wrenches or special hardware. An improved drain plug makes winterizing and draining the strainer body straightforward. Bonding connections are provided on both sides of the housing, allowing the strainer to be tied into the boat's bonding system for corrosion protection. This strainer is intended for above-ground, manually operated installation in raw water intake lines feeding engines, generators, air conditioning, or washdown pumps.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ARG-1210-P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Size:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasket Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Above Ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.19375 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 742985137134\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size intake line does the Groco ARG-1210-P fit?\u003c\/strong\u003e The ARG-1210-P is sized for 1-1\/4 inch raw water intake plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the basket be inspected without opening the strainer?\u003c\/strong\u003e Yes, the ARG-1210-P uses a one-piece molded sight glass cap that magnifies the view inside, so the basket can be checked for debris without removing the housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the filter basket made of?\u003c\/strong\u003e The ARG-1210-P uses a plastic poly filter basket designed to trap debris while maintaining water flow to the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need tools to remove the basket for cleaning?\u003c\/strong\u003e No, the ARG-1210-P mounting system is designed for tool-free removal of the basket for routine cleaning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the strainer body bronze or plastic?\u003c\/strong\u003e The ARG-1210-P has a bronze body with a plastic basket and a non-metallic sight glass cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this strainer have bonding connections?\u003c\/strong\u003e Yes, the ARG-1210-P has bonding connections on both sides of the housing for tying into the boat's bonding system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the strainer sealed?\u003c\/strong\u003e O-rings seal all joining surfaces on the ARG-1210-P, and the design eliminates the tie rods and gaskets used on older strainer styles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ARG-1210-P have a drain plug?\u003c\/strong\u003e Yes, it includes an improved drain plug for draining the strainer body during maintenance or winterizing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this strainer used for?\u003c\/strong\u003e The ARG-1210-P is a raw water intake strainer used to filter debris from water drawn into a boat's engine, generator, air conditioning, or washdown pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the ARG-1210-P weigh?\u003c\/strong\u003e The Groco ARG-1210-P weighs 6.19375 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this strainer for above-ground or below-waterline mounting?\u003c\/strong\u003e The ARG-1210-P is designed for above-ground installation in the raw water intake line.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49031095976155,"sku":"GRO-ARG-1210P","price":326.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41mQ_l4vBlL.jpg?v=1785208656"},{"product_id":"groco-arg-1500-p-raw-water-strainer-1-1-2-inch-non-metallic-plastic-basket","title":"Groco ARG-1500-P Raw Water Strainer, 1-1\/2 Inch, Non-Metallic Plastic Basket","description":"\u003cp\u003eThe Groco ARG-1500-P is a 1-1\/2 inch raw water strainer built for marine plumbing systems that need reliable filtration ahead of engine cooling intakes, air conditioning circuits, or other raw water draws. It uses a removable, non-metallic plastic basket that captures debris, sand, weeds, and other particulate before it can reach a pump or heat exchanger, protecting downstream components from clogging and premature wear. The basket lifts out for quick cleaning and inspection, making routine maintenance straightforward without needing to break down plumbing connections.\u003c\/p\u003e\u003cp\u003eThe strainer body is finished in black with a polished surface, and the unit measures 16 inches in item depth. It ships as a single, complete unit and is part of Groco's ARG-1500 series of 1-1\/2 inch strainers. This construction is well suited for boat owners who want a durable, easy-to-service strainer for continuous raw water intake protection.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ARG-1500-P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Series:\u003c\/strong\u003e ARG-1500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrainer Size:\u003c\/strong\u003e 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasket Material:\u003c\/strong\u003e Non-metallic plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Removable basket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Depth:\u003c\/strong\u003e 16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eNo specific make, engine, or model fitment is listed for this strainer; it is intended for 1-1\/2 inch raw water plumbing lines.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size raw water line does the Groco ARG-1500-P fit?\u003c\/strong\u003e The Groco ARG-1500-P is sized for 1-1\/2 inch raw water plumbing lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the basket in the ARG-1500-P removable for cleaning?\u003c\/strong\u003e Yes, the ARG-1500-P has a removable non-metallic plastic basket that can be taken out for cleaning debris and buildup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the basket made of?\u003c\/strong\u003e The basket in the Groco ARG-1500-P raw water strainer is made of non-metallic plastic, designed to resist corrosion from raw water exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does the ARG-1500-P strainer come in?\u003c\/strong\u003e The ARG-1500-P is finished in black with a polished surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the ARG-1500-P weigh?\u003c\/strong\u003e The Groco ARG-1500-P weighs 11.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the ARG-1500-P strainer?\u003c\/strong\u003e The ARG-1500-P has an item depth of 16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ARG-1500-P come as a complete assembly?\u003c\/strong\u003e Yes, the ARG-1500-P ships as a single complete unit, quantity of one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the ARG-1500-P used for on a boat?\u003c\/strong\u003e It is used as a raw water strainer to filter debris out of water drawn in for engine cooling or other raw water systems before it reaches the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the ARG-1500-P part of a larger product line?\u003c\/strong\u003e Yes, the Groco ARG-1500-P is part of the ARG-1500 series of 1-1\/2 inch raw water strainers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ARG-1500-P have any OEM cross-reference numbers?\u003c\/strong\u003e No OEM cross-reference or replacement part numbers are listed for the Groco ARG-1500-P.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the ARG-1500-P basket be inspected without disconnecting the plumbing?\u003c\/strong\u003e The removable basket design of the ARG-1500-P allows it to be lifted out for inspection and cleaning without breaking down the surrounding plumbing connections.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49031096008923,"sku":"GRO-ARG-1500P","price":497.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61sgV7q-0jL_3346e472-1dbf-478e-9c91-a4dbe17eb55d.jpg?v=1785208656"},{"product_id":"groco-intake-strainer-with-filter-basket-arg-755-s-3-4-inch-npt-304-stainless-steel-basket","title":"Groco Intake Strainer with Filter Basket ARG-755-S, 3\/4 Inch NPT, 304 Stainless Steel Basket","description":"\u003cp\u003eThe Groco ARG-755-S is a 3\/4 inch NPT thru-hull intake strainer designed to protect raw water intake systems from debris, sand, and marine growth before water reaches a pump or engine. At the heart of the strainer is a 304 stainless steel filter basket perforated with 2 mm holes, sized to catch sand, shell fragments, and other small debris while maintaining strong water flow to the pump. The basket sits inside a housing sealed with O-rings on every mating surface, keeping the assembly watertight without relying on gaskets or tie rods that can fail or corrode over time.\u003c\/p\u003e\u003cp\u003eA screw-on cap tops the unit for fast, tool-free maintenance, letting boat owners pull and clean the basket without disassembling the whole strainer. The cap is made from a non-metallic material so it will not corrode or bind shut after repeated saltwater exposure, a common failure point on older metal-capped strainers. Mounting hardware is included, so the strainer is ready to install directly into a thru-hull fitting. This design suits raw water intake lines on boats operating in saltwater or other environments where sand, shells, or debris are a concern, and its screw-on, corrosion-resistant cap makes it a practical upgrade for anyone tired of fighting a stuck strainer lid during routine servicing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ARG-755-S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/4 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasket Material:\u003c\/strong\u003e 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasket Hole Size:\u003c\/strong\u003e 2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Material:\u003c\/strong\u003e Non-metallic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing:\u003c\/strong\u003e O-rings on all mating surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Package Dimensions:\u003c\/strong\u003e 9.6 x 4.9 x 4.8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 742985137592\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size thread does the Groco ARG-755-S use?\u003c\/strong\u003e The Groco ARG-755-S intake strainer uses a 3\/4 inch NPT thread connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the filter basket made of?\u003c\/strong\u003e The basket in the ARG-755-S is made of 304 stainless steel, chosen for its resistance to corrosion in saltwater service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fine is the filtering on this strainer?\u003c\/strong\u003e The ARG-755-S basket has 2 mm holes, small enough to stop sand, shell fragments, and other debris from reaching the pump while still allowing good water flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the strainer cap metal or plastic?\u003c\/strong\u003e The screw-on cap on the ARG-755-S is non-metallic, which prevents the corrosion and binding that can happen with metal caps after repeated saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ARG-755-S come with mounting hardware?\u003c\/strong\u003e Yes, mounting hardware is included with the Groco ARG-755-S so it can be installed without sourcing separate fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you clean or service the basket?\u003c\/strong\u003e The ARG-755-S uses a screw-on cap design, so the basket can be removed for cleaning or inspection without tools or full disassembly of the strainer body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps the strainer watertight?\u003c\/strong\u003e O-rings are fitted on all mating surfaces of the ARG-755-S, sealing the assembly without relying on gaskets or tie rods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the ARG-755-S?\u003c\/strong\u003e The Groco ARG-755-S is blue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the ARG-755-S weigh?\u003c\/strong\u003e The Groco ARG-755-S weighs 4.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the ARG-755-S?\u003c\/strong\u003e The Groco ARG-755-S ships in a package measuring 9.6 x 4.9 x 4.8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this strainer suited for saltwater use?\u003c\/strong\u003e The 304 stainless steel basket and non-metallic cap on the ARG-755-S are built to hold up under saltwater intake conditions.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49031096500443,"sku":"GRO-ARG-755S","price":213.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51E-ATHYlwL.jpg?v=1785208661"},{"product_id":"jabsco-pumpgard-in-line-strainer-46400-0002-1-2-inch-hose-water-pump-intake-filter","title":"Jabsco Pumpgard In-Line Strainer 46400-0002, 1\/2 Inch Hose Water Pump Intake Filter","description":"\u003cp\u003eThe Jabsco Pumpgard In-Line Strainer, part number 46400-0002, protects your boat's water pump intake from dirt, debris, and other particles before they can reach and damage the pump. It installs directly into a 1\/2 inch hose line ahead of the pump, giving the impeller and pump housing a first line of defense against sediment, weeds, and grit drawn in with raw water.\u003c\/p\u003e\u003cp\u003eThe strainer body is built with a transparent housing, so you can visually inspect the mesh screen at any time without disassembling the unit to see whether it needs cleaning. The screen itself is stainless steel, chosen for its corrosion resistance in a wet marine environment, and the housing is finished in black. When the screen does need attention, the in-line design allows for quick in-place cleaning, so you can clear trapped debris and get the water system back in service without cutting into the hose line or removing the strainer from its mounting.\u003c\/p\u003e\u003cp\u003eThis strainer is a simple, functional addition to any raw water intake system, pairing with washdown pumps, freshwater pumps, and other 1\/2 inch hose water systems where protecting the pump from intake debris matters. It is sold as a single unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 46400-0002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Pumpgard In-Line Strainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Connection Size:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Style:\u003c\/strong\u003e In-Line, transparent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Jabsco Pumpgard In-Line Strainer 46400-0002 do?\u003c\/strong\u003e It fits in-line ahead of a water pump to catch dirt and other particles before they reach the pump intake, protecting the impeller and pump housing from debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the 46400-0002 strainer connect to?\u003c\/strong\u003e The Jabsco Pumpgard In-Line Strainer 46400-0002 connects to 1\/2 inch hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I see when the strainer screen needs cleaning?\u003c\/strong\u003e Yes, the 46400-0002 has a transparent housing so the mesh screen inside can be inspected visually at any time without taking the unit apart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I clean the strainer screen?\u003c\/strong\u003e The Jabsco Pumpgard In-Line Strainer is designed for quick in-place cleaning of the mesh screen, so debris can be cleared without removing the strainer from the hose line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the screen made of?\u003c\/strong\u003e The mesh screen inside the 46400-0002 is stainless steel, chosen to resist corrosion in a marine water system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 46400-0002 strainer weigh?\u003c\/strong\u003e This strainer weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the housing?\u003c\/strong\u003e The Pumpgard In-Line Strainer 46400-0002 has a black housing with a clear, transparent section for viewing the screen.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the strainer come with more than one unit?\u003c\/strong\u003e No, the Jabsco 46400-0002 is sold as a single strainer unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should this strainer be installed?\u003c\/strong\u003e It is installed in-line on a 1\/2 inch hose ahead of a water pump intake, such as on a washdown or freshwater pump system, to filter out debris before it reaches the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Jabsco part?\u003c\/strong\u003e Yes, the Pumpgard In-Line Strainer with part number 46400-0002 is a genuine Jabsco product.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49031204929755,"sku":"ITT-46400-0002","price":34.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81zDA7j3f5L.jpg?v=1785211925"},{"product_id":"shurflo-253-221-01-raw-water-strainer-3-4-inch-with-bracket-and-fittings-50-mesh-screen","title":"Shurflo 253-221-01 Raw Water Strainer, 3\/4 Inch with Bracket and Fittings, 50 Mesh Screen","description":"\u003cp\u003eThe Shurflo 253-221-01 is a 3\/4 inch raw water strainer built to protect your engine's raw water cooling system from debris, sand, weeds, and other contaminants before they reach the pump. The strainer housing and mesh basket are molded from durable plastic, and the unit includes a mounting bracket along with the fittings needed for installation on 3\/4 inch water lines. Inside, a 50 mesh screen catches fine particulate while still allowing sufficient water flow for reliable engine cooling, making it a practical addition to any raw water intake plumbing run on a boat.\u003c\/p\u003e\u003cp\u003eThis strainer is designed to be installed inline between the thru-hull or seacock and the raw water pump, where it is easy to inspect and clean. The included bracket allows for secure mounting in the engine compartment, keeping the strainer stable and accessible for routine maintenance. Because clogged intakes are a leading cause of overheating and pump damage, a properly sized strainer like this one is a key part of routine raw water system upkeep.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 253-221-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Thru Hull Fittings \u0026amp; Strainers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Size:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh Screen:\u003c\/strong\u003e 50 mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e No color (natural\/unpainted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Mesh strainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Strainer body, mounting bracket, fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size water line does the Shurflo 253-221-01 strainer fit?\u003c\/strong\u003e The Shurflo 253-221-01 is sized for 3\/4 inch water lines and comes with the bracket and fittings needed for that connection size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mesh size is the strainer screen?\u003c\/strong\u003e It uses a 50 mesh screen, which is fine enough to catch sand, weeds, and other small debris before they reach the raw water pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the strainer body made of?\u003c\/strong\u003e The 253-221-01 strainer housing and basket are made of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 253-221-01 come with a mounting bracket?\u003c\/strong\u003e Yes, the Shurflo 253-221-01 includes a mounting bracket along with the fittings required for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Shurflo 253-221-01 weigh?\u003c\/strong\u003e The Shurflo 253-221-01 raw water strainer weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should this strainer be installed?\u003c\/strong\u003e The 253-221-01 is designed to be installed inline in the raw water intake plumbing, typically between the thru-hull or seacock and the raw water pump, so debris is filtered out before reaching the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Shurflo 253-221-01 strainer?\u003c\/strong\u003e The strainer is supplied with no added color, in its natural plastic finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this strainer genuine Shurflo?\u003c\/strong\u003e Yes, part number 253-221-01 is a genuine Shurflo raw water strainer, not a generic substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the 253-221-01?\u003c\/strong\u003e The package includes the strainer body with 50 mesh screen, a mounting bracket, and the fittings needed for a 3\/4 inch installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I maintain a raw water strainer like the 253-221-01?\u003c\/strong\u003e Because it mounts with an accessible bracket, the 253-221-01 can be periodically opened and the 50 mesh screen cleared of accumulated debris to maintain proper raw water flow to the engine.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49031288520923,"sku":"SHU-253-221-01","price":53.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51mA0g5i-3S.jpg?v=1785212764"},{"product_id":"shurflo-raw-water-strainer-253-321-01-1-inch-with-bracket-and-fittings-50-mesh","title":"Shurflo Raw Water Strainer 253-321-01, 1 Inch with Bracket and Fittings, 50 Mesh","description":"\u003cp\u003eThe Shurflo Raw Water Strainer 253-321-01 is a 1 inch strainer built to protect washdown pumps and raw water pump systems from debris drawn in from lakes, rivers, or marinas. It is installed in the raw water intake line ahead of the pump, where its 50 mesh stainless steel screen catches sand, dirt, and other particles before they can reach and damage pump impellers or clog spray nozzles. Keeping this debris out of the system helps extend pump life and maintain steady water flow and pressure.\u003c\/p\u003e\u003cp\u003eThe strainer housing and mounting bracket are constructed of stainless steel with a white finish, giving it a clean, modern appearance that resists corrosion in a marine environment. It comes complete with the mounting bracket and fittings needed for installation, and the clear or accessible bowl design allows the mesh screen to be removed for periodic cleaning. This is a straightforward, functional design well suited for boat washdown systems and other raw water intake applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 253-321-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Raw Water Strainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Size:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh Size:\u003c\/strong\u003e 50 mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 6 inches L x 4 inches W x 7 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.88 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Strainer with mounting bracket and fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDishwasher Safe:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size intake line does the Shurflo 253-321-01 strainer fit?\u003c\/strong\u003e The Shurflo 253-321-01 raw water strainer is sized for a 1 inch line and includes the fittings needed for that connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mesh size is the filter screen?\u003c\/strong\u003e It uses a 50 mesh stainless steel screen, fine enough to catch sand, dirt, and debris before they reach a raw water pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the strainer housing made of?\u003c\/strong\u003e Stainless steel is used for both the strainer housing and mounting bracket on the Shurflo 253-321-01, giving it corrosion resistance for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Shurflo 253-321-01 come with a mounting bracket?\u003c\/strong\u003e Yes, this strainer includes a mounting bracket along with the fittings needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Shurflo raw water strainer weigh?\u003c\/strong\u003e The Shurflo 253-321-01 weighs 0.88 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this strainer?\u003c\/strong\u003e It measures 6 inches long by 4 inches wide by 7 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the strainer screen be cleaned?\u003c\/strong\u003e Yes, the Shurflo 253-321-01 is designed to be dishwasher safe, and the mesh screen can be cleaned to remove trapped debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this strainer used for?\u003c\/strong\u003e The Shurflo 253-321-01 is used on washdown pump and raw water pump systems to filter sand, dirt, and particles out of intake water and protect the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the housing?\u003c\/strong\u003e The Shurflo 253-321-01 strainer has a white finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the strainer include the fittings needed to install it, or are those sold separately?\u003c\/strong\u003e The fittings are included with the Shurflo 253-321-01, along with the mounting bracket, so no separate fitting purchase is needed for a standard installation.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49031288553691,"sku":"SHU-253-321-01","price":75.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51BVcO27vWS.jpg?v=1785212765"},{"product_id":"groco-arg-s-series-cast-bronze-raw-water-strainer-with-stainless-steel-basket-available-in-1-and-1-1-2","title":"Groco ARG-S Series Cast Bronze Raw Water Strainer with Stainless Steel Basket - Available in 1\" and 1-1\/2\"","description":"\u003cp\u003eThe Groco ARG-S Series raw water strainer protects your boat's engine and raw-water-cooled accessories from sand, weeds, shells, and other debris pulled in through the through-hull intake. Each unit is built from a cast bronze body paired with a removable 304 stainless steel mesh basket, a combination chosen specifically to withstand constant saltwater and freshwater exposure without corroding. Mount it in the raw water line ahead of your engine's cooling system, generator, air conditioning pump, or washdown pump, and pull the basket for a quick rinse during routine maintenance instead of tearing into the plumbing. The ARG-S line is sized to match common intake line diameters, so pick the strainer that corresponds to your existing thru-hull and seacock plumbing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Groco\u003c\/li\u003e\n\u003cli\u003eBody material: Cast bronze\u003c\/li\u003e\n\u003cli\u003eBasket material: 304 stainless steel mesh, removable\u003c\/li\u003e\n\u003cli\u003eFinish: Bronze\u003c\/li\u003e\n\u003cli\u003eStyle: Mesh strainer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis line is available in 1 inch (ARG-1000-S) and 1-1\/2 inch (ARG-1500-S) intake connection sizes. Match the strainer size to the inside diameter of your existing raw water intake hose or thru-hull fitting - do not size up or down without also changing the connecting plumbing and hose barbs\/fittings, as a mismatched strainer restricts flow and stresses hose connections. If you are unsure of your current line size, measure the ID of the hose at the seacock or check your engine's raw water intake specification before ordering.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"1\"","offer_id":49047390716123,"sku":"GRO-ARG-1000S","price":317.66,"currency_code":"USD","in_stock":true},{"title":"1-1\/2\"","offer_id":49047390748891,"sku":"GRO-ARG-1500S","price":497.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61xXsS7JNwL_883cc8a9-18b7-49d2-99f4-b141ed61226c.jpg?v=1785422598"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/shu-253-120-01_lg__60442.1558174835.500.750_40ef2b8b-0d4e-40f0-b6b9-eed69603b202.jpg?v=1785356502","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-engine-parts-systems-cooling-system-raw-water-strainers.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}