{"title":"Fuel Lines, Connectors \u0026 Fittings","description":null,"products":[{"product_id":"shields-fire-acol-type-a2-fuel-fill-hose-1-1-2-in-id-x-12-1-2-ft-alcohol-resistant-uscg-type-a2-mpn-116-350-1124","title":"Sierra Shields Fire-Acol Fuel Fill Hose 16-350-1124, 1 1\/2 Inch x 12.5 Feet, Type A2","description":"\u003cp\u003eThe Sierra 16-350-1124 is a Fire-Acol \"C\" fuel fill hose built for pleasure boat fuel fill systems where resistance to gasoline and alcohol-blended fuels matters. It measures 1 1\/2 inch inside diameter by 12.5 feet in length, sized to run from a boat's deck fill fitting to the fuel tank. The hose is compounded specifically to resist gasoline\/alcohol blends and is engineered for low permeation, meaning less fuel vapor escapes through the hose wall over time. A special compound also resists cover deterioration caused by alcohol fuel sitting in the hose, a common failure point in fuel fill lines that see ethanol-blended gas.\u003c\/p\u003e\u003cp\u003eConstruction is 2-ply, reinforced with a wire helix embedded between plies of heavy-duty synthetic cord, giving the hose crush resistance while keeping it flexible enough to route through tight fill compartments. The cover is abrasion resistant to stand up to contact with surrounding structure and hardware. This hose is rated to a 90 psi burst pressure and is designed for a -5F to 180F operating temperature range. It is intended for fuel fill service with either gasoline or diesel, for pleasure boats only, and is not rated for use beyond that application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 16-350-1124\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Type:\u003c\/strong\u003e Fire-Acol \"C\" Fuel Fill Hose, Type A2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter:\u003c\/strong\u003e 1 1\/2 inch (38.1 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 1 57\/64 inch (48.0 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePly:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBurst Pressure:\u003c\/strong\u003e 90 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Helix Coil Count:\u003c\/strong\u003e 77\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12.5 feet (3.8 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 19.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range:\u003c\/strong\u003e -5F to 180F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HD synthetic cord with embedded wire helix reinforcement, alcohol\/gasoline-resistant compound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Fuel fill hose for gasoline or diesel, pleasure boats only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999571885\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal fuel fill hose sized by diameter and length rather than by a specific boat make or model; confirm your existing fuel fill hose's inside diameter matches 1 1\/2 inch before ordering.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sierra 16-350-1124 fuel fill hose?\u003c\/strong\u003e It measures 1 1\/2 inch inside diameter by 12.5 feet in length, with a 1 57\/64 inch outside diameter, making it the standard size for many pleasure boat deck fill runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose rated for both gasoline and diesel?\u003c\/strong\u003e Yes, the Fire-Acol Type A2 hose (Sierra 16-350-1124) is used for fuel fill service with either gasoline or diesel on pleasure boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hose handle ethanol-blended fuel?\u003c\/strong\u003e It is compounded to resist gasoline\/alcohol blends and is engineered for low permeation, and a special compound resists cover deterioration caused by alcohol fuel resting in the hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the burst pressure rating of the 16-350-1124 hose?\u003c\/strong\u003e 90 psi is the burst pressure rating for this Sierra fuel fill hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the hose reinforced?\u003c\/strong\u003e A wire helix is embedded between plies of heavy-duty synthetic cord, giving the 2-ply construction crush resistance while keeping the hose flexible for routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range is this fuel fill hose rated for?\u003c\/strong\u003e The Sierra 16-350-1124 hose has an operating temperature range of -5F to 180F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 16-350-1124 hose weigh?\u003c\/strong\u003e This 12.5 foot length weighs 19.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose abrasion resistant?\u003c\/strong\u003e Yes, the cover is abrasion resistant, which helps it hold up where the fuel fill run contacts surrounding structure or hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose approved for use on commercial vessels?\u003c\/strong\u003e No, the Fire-Acol Type A2 hose is intended for fuel fill use on pleasure boats only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many plies does this fuel fill hose have?\u003c\/strong\u003e The 16-350-1124 hose is built with 2 plies reinforced by an embedded wire helix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length does the 16-350-1124 part number cover?\u003c\/strong\u003e This part number corresponds to a 12.5 foot length of 1 1\/2 inch inside diameter Fire-Acol fuel fill hose.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988018737371,"sku":"SIE-16-350-1124","price":148.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_601df0b9-9eeb-47ab-9a7f-84ec0f215271.jpg?v=1785353674"},{"product_id":"sierra-116-355-1123-fire-acol-fuel-fill-hose-1-1-2-i-d-x-10-ft-sae-j1527-type-a2-shields-16-355-1123","title":"Sierra 16-355-1123 Fuel Fill Hose, 1-1\/2 Inch x 10 Feet, Type A2 Low-Permeation","description":"\u003cp\u003eThe Sierra 16-355-1123 is a 1-1\/2 inch fuel fill hose built for pleasure boats, sized at 10 feet in length. It is engineered to resist gasoline\/alcohol (ethanol) blends and is compounded specifically for low permeation, so vapor loss through the hose wall stays minimal over the life of the boat. The hose is abrasion resistant and is reinforced with a wire helix imbedded between plies of heavy-duty synthetic cord, giving it the structural integrity to hold its shape under vacuum during fueling while resisting kinking and collapse.\u003c\/p\u003e\u003cp\u003eThis hose is used for the fuel fill run (gas or diesel) between the deck fill fitting and the fuel tank, and it is rated for pleasure boat use only, not for portable tanks or non-marine applications. It meets SAE J1527 Type A2 and ISO 7840 Type A2 standards and carries NMMA\/CE Type Accepted status, confirming it is built to recognized marine fuel-system safety standards. With a 2-ply synthetic construction, a 1-57\/64 inch outside diameter, and a 90 psi burst rating, it is sized to handle standard fuel-fill plumbing on boats using 1-1\/2 inch fill hose. The same hose diameter is also offered by Sierra in a 10 foot carton-packed version (16-355-1123BX) and in other stock lengths, so buyers replacing a full run or building out fuel-fill plumbing can match the length they need.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 16-355-1123\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Fill Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter:\u003c\/strong\u003e 1-1\/2 inches (38.1 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 1-57\/64 inches (48.0 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePly:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBurst Pressure:\u003c\/strong\u003e 90 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall Thickness:\u003c\/strong\u003e 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Synthetic, HD synthetic cord reinforced with imbedded wire helix\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e SAE J1527 Type A2, ISO 7840 Type A2, NMMA\/CE Type Accepted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Fuel fill hose for gasoline or diesel, pleasure boats only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282199951\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sierra 16-355-1123 fuel fill hose?\u003c\/strong\u003e It has a 1-1\/2 inch inside diameter (38.1 mm) and a 1-57\/64 inch outside diameter (48.0 mm), and it is cut to a 10 foot length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose rated for both gasoline and diesel?\u003c\/strong\u003e Yes, the 16-355-1123 fuel fill hose is used for fuel fill service with either gas or diesel and is intended for pleasure boats only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hose handle ethanol-blended fuel?\u003c\/strong\u003e It resists gasoline\/alcohol blends and is compounded for low permeation, so it is built to handle ethanol-blended pump gas without excessive vapor loss.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat safety standards does the 16-355-1123 meet?\u003c\/strong\u003e This hose meets SAE J1527 Type A2 and ISO 7840 Type A2 standards and carries NMMA\/CE Type Accepted status.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hose construction made of?\u003c\/strong\u003e The 16-355-1123 is a 2-ply synthetic hose reinforced with a wire helix imbedded between plies of heavy-duty synthetic cord, and it is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the burst pressure rating?\u003c\/strong\u003e The hose carries a 90 psi burst pressure rating at its 1-1\/2 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fuel fill hose weigh?\u003c\/strong\u003e The 10 foot length of Sierra 16-355-1123 weighs 7.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose abrasion resistant?\u003c\/strong\u003e Yes, the 16-355-1123 is abrasion resistant, which helps it hold up where it runs against hull structure or other components in the fill line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between 16-355-1123 and 16-355-1123BX?\u003c\/strong\u003e Both are the same 1-1\/2 inch, 10 foot fuel fill hose; 16-355-1123BX is the carton-packaged version of the identical hose, while 16-355-1123 is the standard stock code for the same length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hose be used on a portable fuel tank?\u003c\/strong\u003e No, the 16-355-1123 fuel fill hose is intended for pleasure boat fuel fill installations, not portable tank applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wall thickness does the hose have?\u003c\/strong\u003e The 16-355-1123 has a nominal wall thickness of 0.25 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this hose used on a boat?\u003c\/strong\u003e It is installed as the fuel fill run connecting the deck fill fitting to the fuel tank on pleasure boats.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988018901211,"sku":"SIE-16-355-1123","price":105.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51kvhyf_IWL.jpg?v=1784385232"},{"product_id":"sierra-silverado-4000-outboard-marine-fuel-line-available-in-5-16-and-3-8-id-10-to-50-lengths","title":"Sierra Silverado 4000 Outboard Fuel Line - Available in 5\/16\" and 3\/8\" ID, 10' to 50' Lengths","description":"\u003cp\u003eThe Sierra Silverado 4000 Outboard Fuel Line is a marine-grade fuel hose built for above-deck primer bulb fuel line applications on outboard-powered boats. It meets SAE J1527 Type B1-15 and is EPA and CARB compliant, and it is resistant to ethanol-blended fuels, making it a safe choice for modern pump-blend gasoline. Construction uses a THV barrier layer to block fuel permeation, a Nitrile jacket, polyester reinforcement for strength, and a weather- and UV-resistant CPE cover. The gray cover is designed to keep the hose cooler and helps prevent vapor lock in the fuel line. This hose is not fire retardant, so it is intended for above-deck use rather than below-deck engine compartment routing.\u003c\/p\u003e\u003cp\u003eThe Silverado 4000 line is offered in two inside diameters, 5\/16 inch and 3\/8 inch, so it covers the fuel line sizing used across a wide range of outboard fuel systems. Each diameter is available in multiple put-up lengths, from a 10 foot polypac coil for smaller repairs to 25 foot and 50 foot cartons for larger installations, rigging shops, and multi-boat fleets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 16-337\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard fuel line \/ marine fuel hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester reinforcement, Nitrile jacket, THV barrier layer, CPE cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e Meets SAE J1527 Type B1-15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e EPA and CARB compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Compatibility:\u003c\/strong\u003e Resistant to ethanol-blended fuels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Above-deck primer bulb fuel line applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFire Retardant:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable Inside Diameters:\u003c\/strong\u003e 5\/16 inch, 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter - 5\/16 Inch Size:\u003c\/strong\u003e 5\/16 inch (7.9 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter - 5\/16 Inch Size:\u003c\/strong\u003e 1\/2 inch (12.75 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter - 3\/8 Inch Size:\u003c\/strong\u003e 3\/8 inch (9.5 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter - 3\/8 Inch Size:\u003c\/strong\u003e 35\/64 inch (13.72 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable Lengths:\u003c\/strong\u003e 10 feet, 25 feet, 50 feet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eFirst pick the inside diameter that matches your boat's existing fuel line or primer bulb fitting, 5\/16 inch or 3\/8 inch. Then choose the length you need: the 10 foot option ships as a coiled polypac, ideal for a single repair or short run, while the 25 foot and 50 foot lengths ship as reel-off cartons suited to full rigging jobs or stocking multiple repairs. Every size and length uses the same Silverado 4000 construction, so performance and compliance are identical across the line.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat sizes does the Sierra Silverado 4000 outboard fuel line come in?\u003c\/strong\u003e This fuel line is available in two inside diameters, 5\/16 inch and 3\/8 inch, covering the fuel line sizing used on most outboard fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat lengths can I order?\u003c\/strong\u003e The Silverado 4000 line ships in 10 foot, 25 foot, and 50 foot lengths, so you can buy a short coil for a single repair or a longer carton for a full rigging job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fuel line safe for ethanol-blended gasoline?\u003c\/strong\u003e Yes, the Silverado 4000 hose is resistant to ethanol-blended fuels and includes a THV barrier layer to prevent fuel permeation through the hose wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat standards does the Sierra Silverado 4000 fuel line meet?\u003c\/strong\u003e It meets SAE J1527 Type B1-15 and is EPA and CARB compliant, the standards that apply to marine fuel line hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Silverado 4000 fuel line fire retardant?\u003c\/strong\u003e No, this hose is not fire retardant. It is designed for above-deck primer bulb fuel line applications rather than fire-rated engine compartment routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Silverado 4000 fuel line made of?\u003c\/strong\u003e Construction includes a THV barrier layer, a Nitrile jacket, polyester reinforcement for strength, and a weather- and UV-resistant CPE cover over a gray outer jacket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the hose gray instead of black?\u003c\/strong\u003e The gray CPE cover on the Silverado 4000 fuel line is designed to keep the hose cooler than a black hose and helps prevent vapor lock in the fuel system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I order the 10 foot polypac or a 25\/50 foot carton?\u003c\/strong\u003e The 10 foot length ships as a coiled polypac and suits a single hose repair, while the 25 foot and 50 foot lengths ship as reel-off cartons for full rigging jobs or stocking several repairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know whether I need 5\/16 inch or 3\/8 inch fuel line?\u003c\/strong\u003e Match the inside diameter to your boat's existing fuel line or primer bulb fitting; the Silverado 4000 line is offered in both 5\/16 inch and 3\/8 inch inside diameter to fit either setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fuel line come with fittings or clamps?\u003c\/strong\u003e No, the Silverado 4000 outboard fuel line is sold as hose only, by length, and does not include fittings or clamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part?\u003c\/strong\u003e Yes, this is a genuine Sierra Silverado 4000 outboard fuel line, part number stem 16-337, not a generic aftermarket substitute.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"3\/8\" \/ 10' Polypac","offer_id":48988026929371,"sku":"SIE-16-337-0383","price":37.49,"currency_code":"USD","in_stock":true},{"title":"3\/8\" \/ 25' Carton","offer_id":48988026962139,"sku":"SIE-16-337-0385","price":141.7,"currency_code":"USD","in_stock":true},{"title":"3\/8\" \/ 50' Carton","offer_id":48988026994907,"sku":"SIE-16-337-0386","price":169.81,"currency_code":"USD","in_stock":true},{"title":"5\/16\" \/ 10' Polypac","offer_id":48988027027675,"sku":"SIE-16-337-0563","price":36.17,"currency_code":"USD","in_stock":true},{"title":"5\/16\" \/ 25' Carton","offer_id":48988027060443,"sku":"SIE-16-337-0565","price":140.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61tZegAJ3HL_2a21bfd4-1452-480c-ad48-0e4d1df108ea.jpg?v=1784385668"},{"product_id":"sierra-shields-series-368-low-permeation-marine-fuel-feed-hose-available-in-5-16-and-3-8-id-10-and-25-lengths","title":"Sierra Shields Low Permeation Marine Fuel Feed Hose - Available in 5\/16\" and 3\/8\" ID, 10' Polypac or 25' Carton","description":"\u003cp\u003eSierra's Shields Series 368 Low Permeation Marine Fuel Feed Hose is built for boaters who need a fuel line that meets today's strict emissions standards without sacrificing durability. The hose uses a plastic barrier veneer bonded to an NBR outer layer tube, which blocks fuel vapor permeation far more effectively than standard rubber fuel hose. A polyester reinforcement layer gives the hose the strength to handle engine bay heat, fuel pressure, and constant exposure to weather and UV light without cracking or going soft.\u003c\/p\u003e\u003cp\u003eThis hose is designed primarily for fuel feed lines, and it is rated for gasoline (including blends up to 85% ethanol), diesel, and all bio-diesel blends, making it a safe choice across gas and diesel-powered boats. It meets USCG Type A1-15 requirements for pleasure boats, along with SAE J1527 Type A1-15, ISO 7840 Type A1, and NMMA\/CE Type accepted standards, so it satisfies both regulatory and insurance requirements for fuel system work. Operating temperature range is -20 degrees F to 212 degrees F, covering everything from cold winter storage to hot engine compartments.\u003c\/p\u003e\u003cp\u003eThis line is sold in two inner diameters, 5\/16\" and 3\/8\", so it fits a wide range of fuel feed line applications from smaller outboard fuel systems to larger stern drive and inboard feed runs. Each size is available in a 10 foot Polypac or a 25 foot reel-off carton, so you can buy just enough for a single hose replacement or stock up for larger jobs and future repairs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 16-368\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Low Permeation Marine Fuel Feed Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable Inner Diameters:\u003c\/strong\u003e 5\/16\" (7.9 mm), 3\/8\" (9.5 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter (5\/16\" ID):\u003c\/strong\u003e 5\/8\" (15.49 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter (3\/8\" ID):\u003c\/strong\u003e 11\/16\" (17.27 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable Lengths:\u003c\/strong\u003e 10 foot Polypac, 25 foot reel-off carton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure:\u003c\/strong\u003e 100 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e -20 degrees F to 212 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester reinforced hose with NBR outer layer tube and plastic barrier veneer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Compatibility:\u003c\/strong\u003e Gasoline (up to 85% ethanol blends), diesel, all bio-diesel blends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e USCG Type A1-15, SAE J1527 Type A1-15, ISO 7840 Type A1, NMMA\/CE Type accepted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eChoose your inner diameter first (5\/16\" or 3\/8\") to match the fuel line you are replacing or the fitting size on your fuel system components, then choose your length. The 10 foot Polypac is suited to single hose repairs, while the 25 foot reel-off carton is a better value for longer runs or when replacing multiple fuel lines at once.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat sizes does the Sierra Shields 16-368 fuel feed hose come in?\u003c\/strong\u003e The Sierra Shields 16-368 low permeation fuel feed hose is available in 5\/16\" inner diameter and 3\/8\" inner diameter, each offered in a 10 foot Polypac or a 25 foot reel-off carton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose rated for ethanol fuel?\u003c\/strong\u003e Yes, the 16-368 fuel feed hose is rated for gasoline blends up to 85% ethanol, along with diesel and all bio-diesel blends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 5\/16\" and 3\/8\" versions?\u003c\/strong\u003e The two sizes differ in inner and outer diameter: the 5\/16\" hose has a 5\/8\" outside diameter, while the 3\/8\" hose has an 11\/16\" outside diameter. Pick the size that matches the diameter of the fuel line you are replacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum working pressure of this hose?\u003c\/strong\u003e The Sierra Shields 16-368 fuel feed hose has a maximum working pressure of 100 psi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can this hose handle?\u003c\/strong\u003e This hose is rated from -20 degrees F to 212 degrees F, so it holds up in both cold winter storage and hot engine compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hose meet USCG requirements for pleasure boats?\u003c\/strong\u003e Yes, the 16-368 hose meets USCG Type A1-15 requirements for pleasure boats, as well as SAE J1527 Type A1-15, ISO 7840 Type A1, and NMMA\/CE Type accepted standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this hose made of?\u003c\/strong\u003e It is a polyester reinforced hose with an NBR outer layer tube and a plastic barrier veneer that reduces fuel vapor permeation compared to standard rubber fuel hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I buy the 10 foot Polypac or the 25 foot carton?\u003c\/strong\u003e The 10 foot Polypac is sized for a single fuel hose repair, while the 25 foot reel-off carton is a better choice for longer fuel line runs or if you plan to replace more than one line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hose be used with diesel fuel?\u003c\/strong\u003e Yes, the Sierra Shields 16-368 fuel feed hose is rated for diesel and all bio-diesel blends in addition to gasoline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose UV and weather resistant?\u003c\/strong\u003e Yes, the low permeation construction of the 16-368 hose is weather and UV resistant, in addition to meeting EPA and CARB very low permeation requirements.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"3\/8\" \/ 10' Polypac","offer_id":48988027191515,"sku":"SIE-16-368-0383","price":35.73,"currency_code":"USD","in_stock":true},{"title":"3\/8\" \/ 25' Carton","offer_id":48988027224283,"sku":"SIE-16-368-0385","price":68.58,"currency_code":"USD","in_stock":true},{"title":"5\/16\" \/ 10' Polypac","offer_id":48988027257051,"sku":"SIE-16-368-0563","price":35.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61-DQ2P5MjL.jpg?v=1784385716"},{"product_id":"sierra-18-8002ep-1-marine-fuel-primer-bulb-for-1-4-hose-epa-carb-certified-low-permeation","title":"Sierra Fuel Primer Bulb for 1\/4 Inch Hose, EPA\/CARB Certified, 18-8002EP-1","description":"\u003cp\u003eThe Sierra 18-8002EP-1 is a fuel primer bulb built for 1\/4 inch fuel hose, used to manually prime the fuel line and carburetor before starting an outboard or other marine engine. The bulb is molded from Fluoroelastomer (FKM), a material chosen for its traditional look and feel while standing up to continuous exposure to gasoline and ethanol-blended fuels. Inside, it uses double check valves with Viton balls and stainless steel springs to control one-way fuel flow as the bulb is squeezed, helping push fuel from the tank to the engine and purge air from the line.\u003c\/p\u003e\u003cp\u003eOverall length is 7 1\/2 inches (190.5 mm) including the barbed fittings on each end, and the inside diameter of the barbs is sized for 1\/4 inch (6.4 mm) fuel hose. The bulb is finished in white and is molded in house, meeting current EPA regulations in effect as of January 1, 2011 for a permeation rate of 15 g\/m2\/24 hrs, and is both EPA and CARB certified for use in emissions-regulated fuel systems. It is available in standard packs of 12 for shops and installers who need multiple units on hand. This primer bulb is a straightforward replacement part for boaters whose existing 1\/4 inch primer bulb has cracked, hardened, or lost its check-valve seal.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8002EP-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Primer Bulb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose\/Barb Size:\u003c\/strong\u003e 1\/4 inch (6.4 mm) inside diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 7 1\/2 inches (190.5 mm) including barbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fluoroelastomer (FKM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Double check valves with Viton balls and stainless steel springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e EPA\/CARB certified; meets EPA regulation in effect 1\/1\/2011 of 15 g\/m2\/24 hrs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282289669\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Available in standard packs of 12\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the Sierra 18-8002EP-1 primer bulb fit?\u003c\/strong\u003e The Sierra 18-8002EP-1 is sized for 1\/4 inch (6.4 mm) fuel hose, matching the inside diameter of its barbed fittings on each end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the 18-8002EP-1 primer bulb?\u003c\/strong\u003e Overall length is 7 1\/2 inches (190.5 mm) including the barbs on both ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the primer bulb made from?\u003c\/strong\u003e It is molded from Fluoroelastomer (FKM), which gives the Sierra 18-8002EP-1 a traditional primer bulb look and feel while resisting fuel exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8002EP-1 EPA and CARB certified?\u003c\/strong\u003e Yes, the Sierra 18-8002EP-1 primer bulb is both EPA and CARB certified and meets the EPA regulation in effect 1\/1\/2011 for a permeation rate of 15 g\/m2\/24 hrs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of check valves does this primer bulb use?\u003c\/strong\u003e Double check valves with Viton balls and stainless steel springs control fuel flow through the 18-8002EP-1 as it is squeezed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-8002EP-1 primer bulb?\u003c\/strong\u003e It is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-8002EP-1 primer bulb weigh?\u003c\/strong\u003e The Sierra 18-8002EP-1 weighs 0.28 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy the 18-8002EP-1 primer bulb in bulk?\u003c\/strong\u003e Standard packs of 12 are available for this primer bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8002EP-1 the same as the primer bulbs for 5\/16 inch or 3\/8 inch hose?\u003c\/strong\u003e No, the 18-8002EP-1 is sized for 1\/4 inch hose; Sierra also lists separate part numbers, 18-8004EP-1 for 5\/16 inch hose and 18-8005EP-1 for 3\/8 inch hose, so make sure to order the part number matching your hose size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this primer bulb molded in house by Sierra?\u003c\/strong\u003e Yes, the 18-8002EP-1 is molded in house as part of Sierra's line of primer bulbs for the marine aftermarket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-8002EP-1 primer bulb?\u003c\/strong\u003e The UPC is 808282289669.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988431614171,"sku":"SIE-18-8002EP-1","price":27.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8002_lg__72879.1558130896.500.750.jpg?v=1785188158"},{"product_id":"sierra-18-8013ep-2-universal-marine-fuel-line-assembly-5-16-hose-x-8-with-primer-bulb","title":"Sierra 18-8013EP-2 Fuel Line Assembly, Universal 5\/16 Inch x 8 Foot EPA Fuel Hose","description":"\u003cp\u003eThis Sierra 18-8013EP-2 fuel line assembly is a premium, universal-fit fuel hose built for marine fuel systems that need a durable, kink-resistant connection between tank and engine. The hose is constructed with a polyester braid reinforcement, a flexible THV barrier layer for fuel permeation resistance, and a weather-resistant CPE outer cover, giving it the flexibility to route through tight engine compartments without collapsing or cracking under repeated bending.\u003c\/p\u003e\u003cp\u003eThe assembly measures 8 feet (96 inches) in length with a 5\/16 inch (7.9mm) hose inside diameter, sized to match standard marine fuel line fittings. It is finished in gray and is easy to clamp at both ends, making it a straightforward replacement for boat owners servicing an aging or cracked fuel line. As an EPA-compliant fuel line assembly, it is designed for universal use across marine fuel systems rather than a single make or engine, so it works as a general-purpose replacement or spare aboard.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8013EP-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Line Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8 feet (96 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Inside Diameter:\u003c\/strong\u003e 5\/16 inch (7.9mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester braid, rubber, CPE cover, THV barrier layer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282369514\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fuel line assembly, not limited to a specific make, model, or engine.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat length is the Sierra 18-8013EP-2 fuel line assembly?\u003c\/strong\u003e The Sierra 18-8013EP-2 fuel line assembly is 8 feet (96 inches) long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hose diameter on this fuel line?\u003c\/strong\u003e The 18-8013EP-2 has a 5\/16 inch (7.9mm) inside diameter, a standard size for marine fuel line fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fuel line fit my boat?\u003c\/strong\u003e Yes, the Sierra 18-8013EP-2 is a universal fuel line assembly, meaning it is not restricted to one make or engine and can be used as a general marine fuel line replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fuel line made of?\u003c\/strong\u003e It is built with a polyester braid reinforcement, a rubber body, a THV barrier layer for fuel resistance, and a CPE outer cover for weather resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fuel line resistant to kinking?\u003c\/strong\u003e Yes, the flexible construction of the 18-8013EP-2 is designed to resist kinking while remaining easy to clamp at both ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-8013EP-2 fuel line weigh?\u003c\/strong\u003e This Sierra fuel line assembly weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-8013EP-2 fuel hose?\u003c\/strong\u003e The hose is gray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8013EP-2 EPA compliant?\u003c\/strong\u003e Yes, this is an EPA fuel line assembly, built to meet EPA fuel line requirements for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fuel line be cut to a custom length?\u003c\/strong\u003e The 18-8013EP-2 is supplied as an 8 foot assembly; it can be trimmed shorter if a run requires less length, as long as both ends remain properly clamped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part?\u003c\/strong\u003e Yes, part number 18-8013EP-2 is a genuine Sierra fuel line assembly, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this fuel line assembly?\u003c\/strong\u003e The package includes one 18-8013EP-2 fuel line assembly, 8 feet in length with 5\/16 inch hose.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988431646939,"sku":"SIE-18-8013EP-2","price":52.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8013EP-2__85893.1739475393.500.750.jpg?v=1785188501"},{"product_id":"sierra-18-8021-9-snapper-clamp-10-for-3-8-marine-fuel-hose-pack-of-10","title":"Sierra 18-8021-9 Marine Snapper Clamp, OEM 911616 Equivalent,.597-.665 Inch Range, Pack of 10","description":"\u003cp\u003eThe Sierra 18-8021-9 Snapper Clamp is a marine-grade hose clamp sold in a package of 10, sized to fit a clamping range of.597 inch to.665 inch (clamp size 10). It is built to meet or exceed the performance of the original equipment clamp it replaces, corresponding to OEM number 911616. Snapper clamps of this style are used to secure hose connections on marine fuel and cooling system lines, providing a consistent, uniform clamping band around the hose to help prevent leaks in the demanding marine environment.\u003c\/p\u003e\u003cp\u003eEach package weighs 0.06 pounds and ships in compact packaging measuring 7 inches long by 1.75 inches high by 2 inches wide, making it easy to keep spares on board or in a parts bin. Because it is sold as a pack of 10, it is a practical option for a full service job, boat builders, or anyone maintaining multiple hose connections at once. As with other Sierra parts, it is engineered to meet or exceed the original equipment part it replaces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8021-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 911616\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamp Range Size:\u003c\/strong\u003e.597 inch to.665 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamp Size:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Pack of 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 7 inches L x 1.75 inches H x 2 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Weight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282166199\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits hose connections requiring a clamping range of.597 inch to.665 inch (clamp size 10).\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e911616\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat clamping range does the Sierra 18-8021-9 Snapper Clamp fit?\u003c\/strong\u003e The Sierra 18-8021-9 Snapper Clamp fits a clamping range of.597 inch to.665 inch, corresponding to clamp size 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many clamps come in this package?\u003c\/strong\u003e This listing for the Sierra 18-8021-9 Snapper Clamp is priced and packaged per 10 clamps, not as a single unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8021-9 clamp equivalent to an OEM part?\u003c\/strong\u003e Yes, the Sierra 18-8021-9 Snapper Clamp corresponds to OEM number 911616 and is built to meet or exceed the performance of the original equipment clamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the OEM number that the Sierra 18-8021-9 clamp replaces?\u003c\/strong\u003e OEM number 911616 is the original equipment number that the Sierra 18-8021-9 Snapper Clamp corresponds to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a package of the Sierra 18-8021-9 clamps weigh?\u003c\/strong\u003e A pack of 10 Sierra 18-8021-9 Snapper Clamps weighs 0.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions for the Sierra 18-8021-9 clamps?\u003c\/strong\u003e The Sierra 18-8021-9 Snapper Clamp pack measures 7 inches long by 1.75 inches high by 2 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a Snapper Clamp used for?\u003c\/strong\u003e A Snapper Clamp, such as the Sierra 18-8021-9, is a marine-grade hose clamp used to secure hose connections on marine fuel and cooling system lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8021-9 clamp genuine Sierra or aftermarket?\u003c\/strong\u003e The 18-8021-9 is a genuine Sierra part, manufactured to meet or exceed the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size designation does the Sierra 18-8021-9 clamp use?\u003c\/strong\u003e The Sierra 18-8021-9 Snapper Clamp is designated as clamp size 10, covering a range of.597 inch to.665 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-8021-9 clamp come as a single clamp or multiple?\u003c\/strong\u003e It comes as a package of 10 Snapper Clamps under the same Sierra 18-8021-9 part number.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988431679707,"sku":"SIE-18-8021-9","price":10.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-8021-9__91743.1737860793.500.750.jpg?v=1785188661"},{"product_id":"sierra-18-8017ep-2-yamaha-fuel-line-assembly-3-8-x-8-oem-6yl-24306-60-00-fits-f75-f250-115-300-hp","title":"Sierra Fuel Line Assembly 18-8017EP-2, 3\/8 Inch Hose x 8 Foot, Fits Yamaha F75-F250 115-300 HP Outboards","description":"\u003cp\u003eThe Sierra 18-8017EP-2 Fuel Line Assembly is a complete, ready-to-install fuel line built for Yamaha outboard engines. It is constructed from premium rubber with a polyester braid reinforcement and a weather-resistant CPE cover, plus a flexible THV barrier layer that resists kinking while remaining easy to route and clamp during installation. The assembly measures 3\/8 inch (9.5 mm) in hose diameter and 8 feet (2.4 m) in overall length, with a 0.38 inch outside diameter and a nominal wall thickness of 0.06 inches, giving it the durability needed to handle constant exposure to fuel, heat, and the marine environment.\u003c\/p\u003e\u003cp\u003eThis fuel line is designed to fit Yamaha outboards from F75 through F250, covering the 115 to 300 HP range. As a complete assembly rather than bulk hose, it is intended as a direct, drop-in replacement for a worn or deteriorated factory fuel line, restoring reliable fuel delivery between the tank and engine.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8017EP-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester, Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 3\/8 inch (9.5 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 8 feet (2.4 m) \/ 96 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 0.38 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Wall Thickness:\u003c\/strong\u003e 0.06 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYamaha outboards F75 through F250\u003c\/li\u003e\n\u003cli\u003eYamaha outboards 115 to 300 HP\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat Yamaha outboards does the Sierra 18-8017EP-2 fuel line fit?\u003c\/strong\u003e The Sierra 18-8017EP-2 fuel line assembly fits Yamaha outboards from the F75 through the F250, covering the 115 to 300 HP range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the fuel line hose?\u003c\/strong\u003e The hose measures 3\/8 inch (9.5 mm) in diameter, with an outside diameter of 0.38 inches and a nominal wall thickness of 0.06 inches, on the 18-8017EP-2 assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the 18-8017EP-2 fuel line assembly?\u003c\/strong\u003e This assembly is 8 feet (2.4 m) long, or 96 inches, measured end to end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fuel line made of?\u003c\/strong\u003e It is built from premium rubber with a polyester braid reinforcement, a weather-resistant CPE cover, and a flexible THV barrier layer for fuel resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fuel line resist kinking during installation?\u003c\/strong\u003e Yes, the polyester braid and CPE cover on the 18-8017EP-2 are designed to resist kinking while still being flexible enough to route and clamp easily.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the fuel line assembly weigh?\u003c\/strong\u003e The Sierra 18-8017EP-2 fuel line assembly weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete fuel line assembly or bulk hose?\u003c\/strong\u003e It is a complete, ready-to-install fuel line assembly, not bulk hose sold by the foot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the fuel line?\u003c\/strong\u003e The 18-8017EP-2 fuel line is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install this fuel line myself?\u003c\/strong\u003e Yes, the 8-foot 18-8017EP-2 assembly is designed to be easy to clamp and route, making it suitable for a standard DIY fuel line replacement on compatible Yamaha outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8017EP-2 genuine Sierra or aftermarket?\u003c\/strong\u003e The 18-8017EP-2 is a genuine Sierra part, built to Sierra's own construction standards for marine fuel systems.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988431712475,"sku":"SIE-18-8017EP-2","price":59.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-8017ep__49576.1658235587.500.750.jpg?v=1785188481"},{"product_id":"sierra-18-8020-9-snapper-clamp-8-for-5-16-fuel-hose-pack-of-10","title":"Sierra 18-8020-9 Snapper Clamp, Size 8,.538-.608 Inch Range, OEM 322652, Pack of 10","description":"\u003cp\u003eThe Sierra 18-8020-9 Snapper Clamp is a size 8 hose clamp designed to secure hose connections with an outside diameter range of.538 inch to.608 inch. It is sold as a pack of 10 clamps, making it a convenient option for boat builders, service shops, or owners who need to keep spares on hand for routine hose and fuel line maintenance. This clamp is engineered to meet or exceed the performance of the original equipment part it replaces, corresponding to O.E. Number 322652.\u003c\/p\u003e\u003cp\u003eSierra manufactures its marine hardware to hold up in the harsh marine environment, where constant exposure to moisture, vibration, and temperature swings can degrade lower-quality clamps over time. Sierra supplies parts to many OEM engine manufacturers and boat builders, and this clamp is backed by Sierra's warranty coverage. At a clamp size of 8, the 18-8020-9 is sized for smaller-diameter hose and fuel line connections commonly found on marine engines and fuel systems.\u003c\/p\u003e\u003cp\u003eEach pack contains 10 individual clamps, so buyers get enough units for a full service job or to maintain an inventory of common replacement sizes. The clamp corresponds to O.E. Number 322652 for cross-reference purposes when matching against an original part.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8020-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamp Size:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamp Range:\u003c\/strong\u003e.538 inch to.608 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO.E. Number:\u003c\/strong\u003e 322652\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6 x 3 x 1.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282166182\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal-fit hose clamp sized to fit hose connections with an outside diameter of.538 inch to.608 inch; it is not restricted to a specific engine make or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e322652\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Sierra 18-8020-9 clamp fit?\u003c\/strong\u003e The 18-8020-9 is a size 8 clamp that fits hose or fittings with an outside diameter ranging from.538 inch to.608 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many clamps come in a pack?\u003c\/strong\u003e Each pack of the Sierra 18-8020-9 Snapper Clamp contains 10 individual clamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8020-9 clamp equivalent to an OEM part?\u003c\/strong\u003e Yes, it corresponds to O.E. Number 322652 and is engineered to meet or exceed the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of one pack of these clamps?\u003c\/strong\u003e A pack of the Sierra 18-8020-9 Snapper Clamp weighs 0.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the 18-8020-9 clamp pack?\u003c\/strong\u003e The packaged item measures 6 x 3 x 1.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-8020-9 clamp fit a specific boat make or engine model?\u003c\/strong\u003e No specific make or engine model is required; the 18-8020-9 is a general-purpose size 8 hose clamp defined by its.538 inch to.608 inch diameter range rather than a particular engine fitment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8020-9 clamp covered by a warranty?\u003c\/strong\u003e Yes, Sierra backs the 18-8020-9 Snapper Clamp with its manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-8020-9 Snapper Clamp pack?\u003c\/strong\u003e The UPC for the 10-pack of the Sierra 18-8020-9 Snapper Clamp is 808282166182.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-8020-9 clamp be used in marine fuel line applications?\u003c\/strong\u003e Yes, the Sierra 18-8020-9 Snapper Clamp is built to withstand the harsh marine environment and is suited to securing hose connections such as fuel lines within its.538 inch to.608 inch diameter range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does the Sierra 18-8020-9 clamp cross-reference to?\u003c\/strong\u003e The Sierra 18-8020-9 Snapper Clamp cross-references to O.E. Number 322652.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988431745243,"sku":"SIE-18-8020-9","price":9.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-8020-9__76451.1722377650.500.750.jpg?v=1785188890"},{"product_id":"sierra-18-8016ep-2-fuel-line-assembly-for-mercury-mariner-3-8-hose-8-ft-replaces-oe-32-858109q12","title":"Sierra 18-8016EP-2 Fuel Line Assembly, Mercury\/Mariner, Replaces 32-858109Q12, 3\/8 Inch x 8 Foot","description":"\u003cp\u003eThe Sierra 18-8016EP-2 is a complete EPA-compliant fuel line assembly built for Mercury and Mariner outboard and sterndrive fuel systems. It is sold as the SILVERADO 4000 Premium fuel line, a full 8 foot length of 3\/8 inch hose ready to connect your fuel tank to the engine without cutting and clamping raw hose stock. The assembly uses a premium rubber construction with a polyester braid reinforcement layer, a weather-resistant CPE outer cover, and a flexible THV barrier layer on the inside. This layered construction resists kinking when routed through tight bilge and transom spaces, holds its shape under vibration, and is designed to be easy to trim and clamp during installation. The white outer jacket matches factory-style Mercury fuel line coloring.\u003c\/p\u003e\u003cp\u003eThis fuel line assembly directly replaces OEM Mercury fuel line 32-858109Q12 and 32-858109K12, making it a straightforward swap for boats originally equipped with that factory line. It measures 96 inches (8 feet) in length with a 0.38 inch outside diameter, giving installers enough length to route from tank to engine on most standard runs, with excess trimmed to fit. Because it is sold as a complete assembly rather than bulk hose, it is intended to be installed as-is rather than cut into custom lengths.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8016EP-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e EPA Fuel Line Assembly - Mercury\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Mercury \/ Mariner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 3\/8 inch (9.5mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Length:\u003c\/strong\u003e 8 feet (96 inches \/ 2.4m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 0.38 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester, Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282369569\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury \/ Mariner fuel systems using 3\/8 inch fuel line\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e32-858109Q12\u003c\/li\u003e\n\u003cli\u003e32-858109K12\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-8016EP-2 fuel line assembly fit?\u003c\/strong\u003e The 18-8016EP-2 is built for Mercury and Mariner fuel systems that use 3\/8 inch fuel line, and it directly replaces the factory Mercury fuel line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does this fuel line replace?\u003c\/strong\u003e This assembly replaces Mercury OEM numbers 32-858109Q12 and 32-858109K12.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the 18-8016EP-2 fuel line?\u003c\/strong\u003e It is a complete 8 foot (96 inch) assembly, so it comes pre-cut to that length rather than sold as bulk hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the inside hose size?\u003c\/strong\u003e The hose size is 3\/8 inch, listed as 9.5mm, with an outside diameter of 0.38 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fuel line made of?\u003c\/strong\u003e The Sierra 18-8016EP-2 uses a premium rubber construction with a polyester braid layer, a weather-resistant CPE cover, and a flexible THV barrier layer for fuel resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fuel line resistant to kinking?\u003c\/strong\u003e Yes, the polyester braid and CPE cover on the 18-8016EP-2 are designed to resist kinking while remaining easy to clamp during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-8016EP-2 fuel line?\u003c\/strong\u003e It has a white outer jacket, matching the factory-style Mercury fuel line appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fuel line assembly weigh?\u003c\/strong\u003e The Sierra 18-8016EP-2 fuel line assembly weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fuel line be cut to a shorter length?\u003c\/strong\u003e The 18-8016EP-2 is sold as a complete 8 foot assembly and can be trimmed shorter during installation to match a specific run, since some excess length is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre fuel connectors included with this assembly?\u003c\/strong\u003e No, fuel and tank connectors such as those used with Mercury fuel systems are sold separately from the 18-8016EP-2 fuel line assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this replace the original equipment Mercury fuel line?\u003c\/strong\u003e Yes, the 18-8016EP-2 is a direct replacement for the original Mercury fuel line identified by OEM numbers 32-858109Q12 and 32-858109K12.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part or aftermarket?\u003c\/strong\u003e The 18-8016EP-2 is manufactured by Sierra as an EPA-compliant fuel line assembly designed for Mercury and Mariner applications.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988431778011,"sku":"SIE-18-8016EP-2","price":58.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-8016EP-2__93427.1737897863.500.750.jpg?v=1785188347"},{"product_id":"sierra-18-8004ep-1-fuel-primer-bulb-for-5-16-hose-replaces-mercury-89396a38-johnson-evinrude-174511-epa-carb-certified","title":"Sierra Primer Bulb Assembly 5\/16 Inch ID, 18-8004EP-1, Replaces Mercury 89396A38, 89396Q38, Johnson\/Evinrude 174511","description":"\u003cp\u003eThe Sierra Primer Bulb Assembly 18-8004EP-1 is a 5\/16 inch ID fuel line primer bulb used to manually prime the fuel system on outboard and other marine engines before starting. Squeezing the bulb draws fuel from the tank through the line and into the carburetor or fuel injection system, helping the engine start quickly and run smoothly, especially after the boat has been sitting or the fuel line has been disconnected. The bulb is built from Floroelastomer (FKM) material, which gives it the traditional feel and operation boaters expect while standing up to continued exposure to modern fuels. It measures 7 1\/2 inches overall length including the barbed connector ends, which are sized for 5\/16 inch fuel hose and help create a secure, leak-resistant connection at each end of the primer bulb. The assembly is both EPA and CARB certified, meaning it meets emissions-related evaporative standards required for fuel system components sold for use on recreational marine engines. It is manufactured by Sierra International (Teleflex Marine) and functions as a direct equivalent to several original equipment primer bulbs, making it a straightforward replacement when an existing primer bulb has cracked, hardened, or lost its ability to hold prime. This primer bulb is sold and shipped as a single 5\/16 inch ID unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8004EP-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Teleflex Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 5\/16 inch ID\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 7 1\/2 inches, including barbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Floroelastomer (FKM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e EPA\/CARB certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.29 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282289591\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00808282289591\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury 89396A38\u003c\/li\u003e\n\u003cli\u003eMercury 89396Q38\u003c\/li\u003e\n\u003cli\u003eJohnson\/Evinrude 174511\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size fuel hose does the Sierra 18-8004EP-1 primer bulb fit?\u003c\/strong\u003e It is sized for 5\/16 inch ID fuel hose, with barbed ends on each side of the bulb to secure the hose connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this primer bulb replace a Mercury primer bulb?\u003c\/strong\u003e Yes, the Sierra 18-8004EP-1 is a direct equivalent to Mercury primer bulbs 89396A38 and 89396Q38.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bulb compatible with Johnson or Evinrude outboards?\u003c\/strong\u003e The 18-8004EP-1 also serves as a replacement for Johnson\/Evinrude primer bulb 174511.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the primer bulb overall?\u003c\/strong\u003e The Sierra 18-8004EP-1 measures 7 1\/2 inches in overall length, including the barbed connector ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the primer bulb made from?\u003c\/strong\u003e It is made from Floroelastomer (FKM), which gives it a traditional feel and operation while resisting degradation from modern fuels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8004EP-1 emissions certified?\u003c\/strong\u003e Yes, this primer bulb is both EPA and CARB certified for use as a fuel system component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this primer bulb weigh?\u003c\/strong\u003e The Sierra 18-8004EP-1 primer bulb assembly weighs 0.29 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install a primer bulb like the 18-8004EP-1?\u003c\/strong\u003e It installs inline on the fuel hose between the tank and the engine, with the barbed ends pushed into each length of 5\/16 inch hose and secured with clamps; the arrow marking on the bulb should point toward the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part or an aftermarket copy?\u003c\/strong\u003e The 18-8004EP-1 is manufactured by Sierra International (Teleflex Marine), sold under the Sierra brand rather than as a generic aftermarket part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-8004EP-1?\u003c\/strong\u003e You receive one complete Sierra 5\/16 inch ID primer bulb assembly, part number 18-8004EP-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace my boat's primer bulb?\u003c\/strong\u003e Primer bulbs like the 18-8004EP-1 are typically replaced when the original bulb has cracked, hardened, or can no longer hold prime, which prevents the fuel system from priming properly before starting.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988431876315,"sku":"SIE-18-8004EP-1","price":27.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sie-18-8004ep-1_large__33633.1558141847.500.750.jpg?v=1785188529"},{"product_id":"sierra-18-8005ep-1-marine-fuel-primer-bulb-3-8-in-hose-replaces-oem-174512","title":"Sierra 18-8005EP-1 Primer Bulb, 3\/8 Inch Fuel Line, Replaces 174512","description":"\u003cp\u003eThe Sierra 18-8005EP-1 is a 3\/8 inch fuel line primer bulb used to manually prime the fuel system on marine engines before startup. Squeezing the bulb draws fuel from the tank through the line and into the engine, purging air from the system so the engine starts more easily. This primer bulb is built with double check valves that use viton balls and stainless steel springs, a valve design intended to hold fuel pressure and resist wear from repeated priming. The bulb body is molded in house as part of Sierra's fuel line assembly program, and it is EPA and CARB certified for marine fuel system use.\u003c\/p\u003e\u003cp\u003eThe 18-8005EP-1 is designed to work with 3\/8 inch ID fuel line and is sold as a standalone component for building or servicing a fuel line assembly, separate from the fuel connector and tank connector fittings used elsewhere in the assembly. It is a direct service replacement for primer bulbs cross-referenced to OEM number 174512.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8005EP-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Teleflex Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Primer Bulb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 3\/8 inch ID\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck Valve Design:\u003c\/strong\u003e Double check valves with viton balls and stainless steel springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e EPA and CARB certified for marine use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 4.5 x 2 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.26 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282289607\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits 3\/8 inch ID marine fuel line assemblies\u003c\/li\u003e\n\u003cli\u003eSold separately for use in building or servicing fuel line assemblies alongside fuel connectors and tank connectors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e174512\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size fuel line does the Sierra 18-8005EP-1 primer bulb fit?\u003c\/strong\u003e The Sierra 18-8005EP-1 is built for 3\/8 inch ID fuel line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-8005EP-1 replace OEM part 174512?\u003c\/strong\u003e Yes, the Sierra 18-8005EP-1 primer bulb is a direct replacement for OEM part number 174512.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this primer bulb?\u003c\/strong\u003e The Sierra 18-8005EP-1 measures 4.5 x 2 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-8005EP-1 primer bulb weigh?\u003c\/strong\u003e It weighs 0.26 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat valve design does the 18-8005EP-1 use?\u003c\/strong\u003e It uses double check valves with viton balls and stainless steel springs to hold fuel pressure during priming.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8005EP-1 sold with fuel line hose or connectors included?\u003c\/strong\u003e No, the 18-8005EP-1 is the primer bulb only; the fuel connector and tank connector fittings used in a complete fuel line assembly are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this primer bulb certified for marine fuel systems?\u003c\/strong\u003e Yes, the Sierra 18-8005EP-1 is EPA and CARB certified for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 18-8005EP-1 bulb constructed?\u003c\/strong\u003e The bulb body of the 18-8005EP-1 is molded in house as part of Sierra's fuel line component program.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the 18-8005EP-1 primer bulb?\u003c\/strong\u003e The 18-8005EP-1 is manufactured by Sierra.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-8005EP-1?\u003c\/strong\u003e The UPC for the Sierra 18-8005EP-1 primer bulb is 808282289607.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-8005EP-1 be used to replace a worn primer bulb in an existing fuel line?\u003c\/strong\u003e Yes, the 18-8005EP-1 is designed as a service replacement bulb for 3\/8 inch ID fuel line assemblies, including systems originally using OEM part 174512.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988431974619,"sku":"SIE-18-8005EP-1","price":28.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__67090.1752871232.500.750.jpg?v=1785188175"},{"product_id":"sierra-18-80403-female-fuel-connector-3-8-in-hose-honda-outboard-motor-end-fitting-white","title":"Sierra Fuel Connector 18-80403 Female 3\/8 Inch White Outboard Fuel Line Fitting","description":"\u003cp\u003eThe Sierra 18-80403 is a female fuel connector designed for late model outboard engines, providing a secure, leak-resistant link between the fuel hose and the engine's fuel line. It features a female connection with a rectangular locking post that clicks firmly into place, holding the mating fitting secure during engine operation and vibration. The connector is sized for 3\/8 inch (95mm) fuel hose and is molded in white for easy identification against black hose and hardware. This connector is built to mate with the Sierra 18-80407 fitting and is intended for use with the Sierra 18-81042 fuel hose assembly at the motor end. Because it uses a rectangular locking post and 3\/8 inch bore, it will not interchange with older OE fuel connectors that use a 5\/16 inch hose assembly design, so it is important to confirm your engine's hose size and connector style before ordering. The connector ships as a single item and is a straightforward swap for boaters replacing a worn, cracked, or leaking fuel connector as part of routine fuel system maintenance. Its compact size and lightweight construction make it an easy, affordable part to keep on hand for outboard fuel system repairs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-80403\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8 inch (95mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Post Style:\u003c\/strong\u003e Rectangular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMates With:\u003c\/strong\u003e Sierra 18-80407\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Late model outboard engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5.5 x 2 x 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282185282\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe Sierra 18-80403 fuel connector is designed for late model outboard engines and is intended for use with the Sierra 18-81042 fuel hose assembly at the motor end. It mates with the Sierra 18-80407 fitting. It will not interchange with OE fuel connectors built around a 5\/16 inch hose assembly.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-80403 fuel connector used for?\u003c\/strong\u003e The Sierra 18-80403 is a female fuel connector used to join a 3\/8 inch (95mm) fuel hose to a late model outboard engine's fuel line, creating a secure, leak-resistant connection point in the fuel system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-80403 a male or female fitting?\u003c\/strong\u003e It is a female connector. The Sierra 18-80403 mates with the Sierra 18-80407 fitting to complete the connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the 18-80403 fuel connector fit?\u003c\/strong\u003e The Sierra 18-80403 is sized for 3\/8 inch, also listed as 95mm, fuel hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-80403 work with 5\/16 inch OE fuel hose assemblies?\u003c\/strong\u003e No. The 18-80403 uses a 3\/8 inch bore with a rectangular locking post and will not interchange with older OE fuel connectors built around a 5\/16 inch hose assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-80403 connector?\u003c\/strong\u003e The Sierra 18-80403 fuel connector is white, which makes it easy to distinguish from black hose and fittings during installation or inspection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuel hose assembly is the 18-80403 meant to be used with?\u003c\/strong\u003e The 18-80403 is designed for use with the Sierra 18-81042 fuel hose assembly at the motor end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-80403 fuel connector weigh?\u003c\/strong\u003e The 18-80403 weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-80403 fuel connector?\u003c\/strong\u003e The Sierra 18-80403 measures 5.5 x 2 x 1.25 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat locking mechanism does the 18-80403 use?\u003c\/strong\u003e A rectangular locking post secures the mating fitting in place once the 18-80403 connector is fully seated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-80403 fuel connector come with any other parts included?\u003c\/strong\u003e The 18-80403 ships as a single fuel connector fitting; no additional hose or hardware is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich fitting does the 18-80403 pair with?\u003c\/strong\u003e The Sierra 18-80403 mates with the Sierra 18-80407 fuel connector fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-80403 intended for older outboard engines?\u003c\/strong\u003e The 18-80403 is designed for late model engines and specifically will not interchange with older OE connectors that use a 5\/16 inch hose assembly design, so it is best suited to newer applications.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432105691,"sku":"SIE-18-80403","price":12.12,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-80403_lg__20464.1558131526.500.750.jpg?v=1785188028"},{"product_id":"sierra-18-80402-tank-side-fuel-connector-1-4-in-npt-for-mercury-mariner-outboards","title":"Sierra 18-80402 Fuel Line Tank Connector, 1\/4 Inch NPT, Fits Mercury Mariner and Force Outboards","description":"\u003cp\u003eThe Sierra 18-80402 is a double sealed quick connect tank connector fitting used to build or repair marine fuel line assemblies on outboard motors. It threads in with a 1\/4 inch NPT connection and is designed to mate with the tank-end quick connect fitting used on Sierra fuel line assemblies, pairing with connector 18-8091 to complete the hookup. This part is sold separately from the complete fuel line assembly kits it is designed to work with.\u003c\/p\u003e\u003cp\u003eThe 18-80402 fits Force outboards rated 40 HP and larger (1993 and Newer), Force 9.9\/15\/25 HP outboards (1998), and all Mercury and Mariner outboards that use clip-on type disconnects at both the tank end and the engine end of the fuel line. It is a machined fitting built for a secure, leak-resistant seal at the tank connection point, and it is a compact, easy-to-install replacement for a worn or damaged tank connector without requiring a full fuel line assembly replacement.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-80402\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Line Tank Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Double Sealed Quick Connect (Tank End)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/4 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Mates with Sierra 18-8091\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.31 x 2.94 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Taiwan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282185275\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eForce outboards, 40 HP and larger, 1993 and Newer\u003c\/li\u003e\n\u003cli\u003eForce outboards, 9.9\/15\/25 HP, 1998\u003c\/li\u003e\n\u003cli\u003eAll Mercury and Mariner outboards using clip-on type disconnects at both tank and engine ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers listed for this part\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-80402?\u003c\/strong\u003e The 18-80402 is a double sealed quick connect tank connector fitting used at the tank end of a marine outboard fuel line assembly, sold separately from the complete fuel line kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does the 18-80402 use?\u003c\/strong\u003e It has a 1\/4 inch NPT thread connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-80402 fit Mercury and Mariner outboards?\u003c\/strong\u003e Yes, the 18-80402 fits all Mercury and Mariner outboards that use clip-on type disconnects at both the tank end and the engine end of the fuel line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-80402 fit a Force outboard?\u003c\/strong\u003e It fits Force outboards rated 40 HP and larger (1993 and Newer) as well as Force 9.9\/15\/25 HP outboards from 1998.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat part does the 18-80402 mate with?\u003c\/strong\u003e The 18-80402 tank connector mates with Sierra connector 18-8091 to complete the fuel line hookup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-80402 include a fuel line hose?\u003c\/strong\u003e No, this listing is for the tank connector fitting only; it is sold separately from the complete 8 foot fuel line assemblies it is used with.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-80402?\u003c\/strong\u003e The connector measures 5.31 x 2.94 x 1.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-80402 weigh?\u003c\/strong\u003e It weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-80402 a genuine Sierra part?\u003c\/strong\u003e Yes, part number 18-80402 is a Sierra branded fuel line tank connector, not a generic substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the 18-80402 manufactured?\u003c\/strong\u003e The Sierra 18-80402 fuel connector is manufactured in Taiwan.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-80402 a double sealed fitting?\u003c\/strong\u003e Yes, the 18-80402 is a double sealed quick connect type fitting designed for the tank end of the fuel line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace the 18-80402 separately?\u003c\/strong\u003e If only the tank-end connector on your fuel line has failed or is leaking, the 18-80402 lets you replace just that fitting instead of the entire fuel line assembly.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432138459,"sku":"SIE-18-80402","price":17.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-80402_lg__14076.1558131478.500.750.jpg?v=1785188273"},{"product_id":"sierra-18-80405-fuel-connector-female-to-3-8-in-hose-barb-suzuki-outboard-fuel-line-fitting","title":"Sierra Fuel Connector 18-80405 for Suzuki Outboard Fuel Lines and Fittings","description":"\u003cp\u003eThe Sierra Fuel Connector, part number 18-80405, is a fuel line fitting designed for Suzuki outboard fuel systems. It is used to join or connect sections of the outboard's fuel line, providing a secure, leak-resistant link within the fuel delivery system. As part of Sierra's Suzuki Outboard Fuel Lines and Fittings lineup, this connector is built to work within the fuel line routing that carries fuel from the tank to the engine on compatible Suzuki outboard motors. Its compact, lightweight design at 0.14 pounds makes it easy to install as part of a fuel line repair, replacement, or maintenance job. Keeping fuel line connectors in good condition is an important part of outboard upkeep, since a worn or damaged connector can lead to fuel leaks or air intrusion into the fuel system. This Sierra fuel connector is identified by UPC 808282186517 for easy verification when ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-80405\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suzuki Outboard Fuel Lines \u0026amp; Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282186517\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Sierra part number 18-80405?\u003c\/strong\u003e Sierra 18-80405 is a fuel connector used in Suzuki outboard fuel line and fitting systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-80405 fuel connector weigh?\u003c\/strong\u003e The Sierra 18-80405 fuel connector weighs 0.14 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is part number 18-80405?\u003c\/strong\u003e Part number 18-80405 is manufactured by Sierra.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of parts does the 18-80405 belong to?\u003c\/strong\u003e The Sierra 18-80405 is categorized under Suzuki Outboard Fuel Lines \u0026amp; Fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-80405 fuel connector?\u003c\/strong\u003e The UPC for the Sierra 18-80405 fuel connector is 808282186517.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-80405 a genuine Sierra part?\u003c\/strong\u003e Yes, the 18-80405 fuel connector is a genuine Sierra branded part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the function of the Sierra 18-80405 fuel connector?\u003c\/strong\u003e As a fuel connector, the Sierra 18-80405 links sections of the fuel line within a Suzuki outboard's fuel delivery system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-80405 fit Suzuki outboards?\u003c\/strong\u003e The Sierra 18-80405 is listed under Suzuki Outboard Fuel Lines \u0026amp; Fittings, indicating its use with Suzuki outboard fuel systems.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432171227,"sku":"SIE-18-80405","price":18.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-80405_lg__04408.1558131573.500.750.jpg?v=1785329159"},{"product_id":"sierra-female-fuel-connector-5-16-for-honda-outboards-replaces-17650-zw9-003-mates-with-18-80407","title":"Sierra 18-80408 Fuel Connector, Replaces Honda 17710-ZW9-033, Fits BF8-BF130 (2003)","description":"\u003cp\u003eThe Sierra 18-80408 is a 5\/16 inch fuel connector built to replace the Honda outboard fitting it is designed around, using an interlocking post connection for a secure, leak-resistant seal at the fuel line joint. It mates with the Sierra 18-80403 connector to complete the fuel line coupling, making the pair the correct way to reconnect or rebuild a fuel line disconnect point on compatible Honda outboards. The connector is constructed of metal with a white finish and features NPT threading for a proper fit into the fuel line assembly.\u003c\/p\u003e\u003cp\u003eThis connector is commonly used when repairing, replacing, or upgrading a worn or damaged fuel line fitting, or when building a new fuel line assembly for a Honda outboard covered by its fitment. Because it mates specifically with the 18-80403 connector, buyers building a full disconnect coupling should order both parts.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-80408\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost Style:\u003c\/strong\u003e Interlocking post\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.5 x 2 x 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMates With:\u003c\/strong\u003e Sierra 18-80403\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eHonda BF8-BF130 outboards (2003)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e17710-ZW9-033\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-80408 fuel connector replace?\u003c\/strong\u003e It replaces OEM part number 17710-ZW9-033, so it is a direct cross-reference for that Honda fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the 18-80408 fuel connector?\u003c\/strong\u003e It is a 5\/16 inch connector with an interlocking post design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-80408 a male or female connector?\u003c\/strong\u003e It is a female connector, built to mate with the Sierra 18-80403 to complete the fuel line coupling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-80408 mate with?\u003c\/strong\u003e This connector mates with the Sierra 18-80403 fuel connector; the two are sold as separate part numbers and both are needed to complete a fuel line disconnect coupling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-80408 fit?\u003c\/strong\u003e It fits Honda BF8-BF130 outboards (2003).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-80408 fuel connector made of?\u003c\/strong\u003e It is made of metal with a white finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-80408 weigh?\u003c\/strong\u003e The Sierra 18-80408 fuel connector weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-80408 connector?\u003c\/strong\u003e It measures 5.5 x 2 x 1.25 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type does the 18-80408 use?\u003c\/strong\u003e It uses NPT threading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to order a matching connector with the 18-80408?\u003c\/strong\u003e Yes, since the 18-80408 mates with the Sierra 18-80403, order both if you are completing a full fuel line disconnect coupling rather than replacing a single side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-80408 a genuine Honda part or aftermarket?\u003c\/strong\u003e The 18-80408 is a Sierra-manufactured connector engineered to replace Honda part 17710-ZW9-033, functioning as a direct aftermarket equivalent rather than a genuine Honda component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sierra 18-80408?\u003c\/strong\u003e The listing includes one Sierra 18-80408 fuel connector.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432203995,"sku":"SIE-18-80408","price":11.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-80408_lg__42734.1558131722.500.750.jpg?v=1785188979"},{"product_id":"sierra-18-8015ep-2-universal-marine-fuel-line-assembly-5-16-x-8-fits-force-40hp-and-mercury-outboards-with-clip-on-disconnects","title":"Sierra Fuel Line Assembly 18-8015EP-2, Universal, 3\/8 Inch x 8 Feet","description":"\u003cp\u003eThe Sierra 18-8015EP-2 is a complete universal fuel line assembly built to move fuel from tank to engine with a durable, weather resistant hose. The 3\/8 inch (9.5mm) hose runs 8 feet (96 inches) in length and is constructed from premium rubber with a polyester braid reinforcement layer, a weather resistant CPE cover, and a flexible THV barrier layer. This multi-layer build resists kinking, stays flexible in cold temperatures, and is easy to clamp during installation or replacement.\u003c\/p\u003e\u003cp\u003eThe assembly is fitted with clip-on type disconnects at both the tank and engine ends, making it a universal fit for outboards that use this connector style, including Force 40 HP and larger outboards, Force 9.9\/15\/25 HP outboards, and Mercury outboards equipped with clip-on disconnects. The hose is finished in white and is a single-count, ready to install assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8015EP-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester, Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Outside Diameter:\u003c\/strong\u003e 0.38 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Wall Thickness:\u003c\/strong\u003e 0.0625 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 3\/8 inch (9.5mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Length:\u003c\/strong\u003e 8 feet (96 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Clip-on type disconnects, both ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282369545\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eForce outboards, 40 HP and larger\u003c\/li\u003e\n\u003cli\u003eForce outboards, 9.9\/15\/25 HP\u003c\/li\u003e\n\u003cli\u003eMercury outboards using clip-on type disconnects at both tank and engine ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose is the Sierra 18-8015EP-2 fuel line assembly?\u003c\/strong\u003e It uses a 3\/8 inch (9.5mm) hose with an outside diameter of 0.38 inches and a nominal wall thickness of 0.0625 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this fuel line assembly?\u003c\/strong\u003e The Sierra 18-8015EP-2 measures 8 feet (96 inches) in overall length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards does the 18-8015EP-2 fit?\u003c\/strong\u003e It fits Force outboards 40 HP and larger, Force 9.9\/15\/25 HP outboards, and Mercury outboards that use clip-on type disconnects at both the tank and engine ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fuel line made of?\u003c\/strong\u003e The hose is built from premium rubber with a polyester braid reinforcement layer, a weather resistant CPE outer cover, and a flexible THV barrier layer inside.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8015EP-2 resistant to kinking?\u003c\/strong\u003e Yes, the polyester braid and multi-layer construction of the 18-8015EP-2 help it resist kinking while staying flexible for routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connector type does this fuel line use?\u003c\/strong\u003e Clip-on type disconnects are fitted at both the tank end and the engine end of the 18-8015EP-2 assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-8015EP-2 fuel line assembly weigh?\u003c\/strong\u003e This fuel line assembly weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-8015EP-2?\u003c\/strong\u003e The 18-8015EP-2 fuel line assembly is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete, ready to install fuel line?\u003c\/strong\u003e Yes, the 18-8015EP-2 is a complete fuel line assembly with clip-on disconnects already attached at both ends, sold as a single unit ready for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-8015EP-2 come with a primer bulb?\u003c\/strong\u003e No, this listing is for the 8 foot fuel line assembly itself; primer bulbs are separate components in Sierra's fuel line assembly lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 3\/8 inch hose easy to clamp during a fuel line replacement?\u003c\/strong\u003e Yes, the 18-8015EP-2 hose is designed to be easy to clamp, simplifying installation when replacing an existing fuel line.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432236763,"sku":"SIE-18-8015EP-2","price":54.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8013EP-2__79917.1739475393.500.750.jpg?v=1785189163"},{"product_id":"fuel-connector-for-suzuki-dt4-dt65-outboard-motor-side-1-4-in-barb-replaces-65720-94401-sierra-18-80418","title":"Sierra Fuel Connector 18-80418, Motor Side, Replaces 65720-94401, Fits Suzuki DT4-DT65 Outboards","description":"\u003cp\u003eThe Sierra 18-80418 is a motor-side fuel connector engineered for Suzuki DT4 through DT65 outboard engines. This fitting is the connection point where the fuel line attaches to the engine, using a 1\/4 inch barb to secure a standard fuel hose. It is built as a direct replacement for the original Suzuki fuel connector, letting you restore a tight, leak-free fuel supply connection without sourcing OEM parts through a dealer.\u003c\/p\u003e\u003cp\u003eFuel connectors are a common wear item since they see constant handling every time the fuel line is connected or disconnected, and the internal seals and check valve components degrade with age and ethanol-blended fuels. Replacing a worn or leaking connector at the engine side restores proper fuel flow and prevents air intrusion or fuel leaks at the connection point. The 18-80418 is sized specifically for the motor side of the fuel line circuit, distinct from the fuel tank side connector, so it should be installed at the engine end of the fuel line only.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-80418\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Fuel Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Side:\u003c\/strong\u003e Motor side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282227524\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e 65720-94401\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSuzuki DT4-DT65 outboards\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e65720-94401\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-80418 fuel connector used for?\u003c\/strong\u003e The 18-80418 is a motor-side fuel connector that attaches the fuel line to a Suzuki outboard engine using a 1\/4 inch barb fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Suzuki outboards fit the 18-80418 fuel connector?\u003c\/strong\u003e This connector fits Suzuki DT4 through DT65 outboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-80418 replace an OEM Suzuki part number?\u003c\/strong\u003e Yes, the Sierra 18-80418 replaces OEM Suzuki part number 65720-94401.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this connector go on the engine side or the fuel tank side of the line?\u003c\/strong\u003e The 18-80418 is a motor-side connector, meaning it installs at the engine end of the fuel line, not the fuel tank end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose barb does the 18-80418 use?\u003c\/strong\u003e The 18-80418 fuel connector has a 1\/4 inch barb for attaching the fuel hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-80418 weigh?\u003c\/strong\u003e The 18-80418 fuel connector weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-80418 a genuine OEM part or aftermarket?\u003c\/strong\u003e The 18-80418 is a Sierra-brand replacement part manufactured to replace OEM Suzuki part number 65720-94401, not an original Suzuki-branded component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace a fuel connector like the 18-80418?\u003c\/strong\u003e Fuel connectors wear out from repeated connecting and disconnecting and from exposure to ethanol-blended fuel, which can cause leaks or poor fuel flow; the 18-80418 restores a secure connection at the motor side of the fuel line on compatible Suzuki DT4-DT65 outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-80418 be used on the fuel tank side of the line instead?\u003c\/strong\u003e No, the 18-80418 is designed specifically as the motor-side connector and should be installed at the engine end of the fuel line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-80418?\u003c\/strong\u003e The order includes one Sierra 18-80418 motor-side fuel connector with a 1\/4 inch barb fitting.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432269531,"sku":"SIE-18-80418","price":14.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-80418_lg__31088.1558132237.500.750.jpg?v=1785329160"},{"product_id":"sierra-18-80407-5-16-fuel-connector-with-interlocking-post-replaces-honda-17710-zw9-033-fits-honda-outboards-bf8-bf130-2003","title":"Sierra 18-80407 5\/16 Inch Interlocking Post Fuel Connector, Replaces Honda 17710-ZW9-033, Fits Honda BF8-BF130 (2003)","description":"\u003cp\u003eThe Sierra 18-80407 is a 5\/16 inch (7.9mm) fuel connector fitted with a rectangular interlocking locking post, engineered as a direct replacement for the Honda 17710-ZW9-033 fuel connector used on Honda outboard fuel line assemblies. This connector is the female half of the fuel line coupling and is designed to mate with a corresponding male connector to complete a secure, leak-resistant fuel line connection on compatible Honda outboards.\u003c\/p\u003e\u003cp\u003eSierra manufactures this connector to meet or exceed the original equipment part it replaces, built to withstand the harsh marine environment while handling gasoline fuel delivery demands. The 18-80407 mates with either the Sierra 18-80403 or Sierra 18-80408 fuel connector, giving installers flexibility depending on which mating connector their fuel line setup requires. It is intended for Honda BF8 through BF130 outboard engines from the 2003 model year.\u003c\/p\u003e\u003cp\u003eEvery Sierra fuel connector, including the 18-80407, is backed by Sierra's Industry Leading Customer Satisfaction Warranty, which covers defects in workmanship and materials for the useful life of the product.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-80407\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Size:\u003c\/strong\u003e 5\/16 inch (7.9mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Style:\u003c\/strong\u003e Interlocking post\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e Honda 17710-ZW9-033\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMates With:\u003c\/strong\u003e Sierra 18-80403 or Sierra 18-80408\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6 x 2 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Vehicle Specific\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282227449\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eHonda Outboards BF8 - BF130 (2003)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eHonda 17710-ZW9-033\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-80407 fuel connector replace?\u003c\/strong\u003e The Sierra 18-80407 replaces the Honda OEM fuel connector 17710-ZW9-033, providing a direct-fit aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Honda outboards is the 18-80407 fuel connector compatible with?\u003c\/strong\u003e This connector fits Honda outboards BF8 through BF130 from the 2003 model year.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fuel line does the 18-80407 use?\u003c\/strong\u003e It is a 5\/16 inch (7.9mm) fuel connector, designed for that hose diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of locking mechanism does this connector have?\u003c\/strong\u003e The Sierra 18-80407 uses a rectangular interlocking locking post design to secure the fuel line connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other Sierra connectors does the 18-80407 mate with?\u003c\/strong\u003e The 18-80407 mates with either the Sierra 18-80403 or the Sierra 18-80408 fuel connector, depending on the fuel line configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-80407 weigh?\u003c\/strong\u003e The Sierra 18-80407 fuel connector weighs 0.09 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-80407 fuel connector?\u003c\/strong\u003e The Sierra 18-80407 measures 6 x 2 x 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-80407 a genuine Honda part or aftermarket?\u003c\/strong\u003e It is a Sierra aftermarket fuel connector engineered to meet or exceed the Honda 17710-ZW9-033 original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-80407 come with a warranty?\u003c\/strong\u003e Yes, the 18-80407 qualifies for Sierra's Industry Leading Customer Satisfaction Warranty, covering defects in workmanship and materials for the useful life of the product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuel type is the 18-80407 connector rated for?\u003c\/strong\u003e The Sierra 18-80407 is rated for gasoline fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-80407 the male or female half of the fuel connector coupling?\u003c\/strong\u003e The Sierra 18-80407 is the fuel connector fitted with the interlocking locking post that mates to a corresponding Sierra connector to complete the coupling.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432302299,"sku":"SIE-18-80407","price":37.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__46220.1753840682.500.750.jpg?v=1785188009"},{"product_id":"fuel-connector-for-yamaha-outboard-replaces-6e5-24305-05-6y2-24305-05-fits-f75-f250-115-300-hp-8mm-fuel-line-sierra-18-80415","title":"Sierra Fuel Connector 18-80415, Replaces 6E5-24305-05, for Yamaha 8mm Fuel Line","description":"\u003cp\u003eThe Sierra 18-80415 is a small fuel connector engineered to mate with Yamaha 8mm fuel line, forming a secure coupling point in the outboard fuel system. Machined from anodized aluminum, it provides a durable, corrosion-resistant connection between the fuel line and the engine or portable tank fitting. This connector mates with Sierra fitting 18-8077-1, allowing it to complete a proper fuel line coupling for Yamaha outboard applications.\u003c\/p\u003e\u003cp\u003eIts compact 5.75 x 2 x 1.5 inch size and 0.07 pound weight make it an easy, low-cost swap for a worn, cracked, or leaking factory connector. The anodized aluminum body resists fuel exposure and marine environments, and the coupling-type connector design ensures a tight, reliable seal when paired with the correct mating fitting. This part directly replaces the original Yamaha fuel connectors listed below, so it is a straightforward drop-in fix for fuel line connection issues on compatible Yamaha outboards.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-80415\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Fuel Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5\/16 inch or 8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Line Compatibility:\u003c\/strong\u003e Yamaha 8mm fuel line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMates With:\u003c\/strong\u003e Sierra 18-8077-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Anodized Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Coupling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.75 x 2 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282227500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eYamaha outboards using 8mm fuel line\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6E5-24305-05\u003c\/li\u003e\n\u003cli\u003e6Y2-24305-05\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-80415 fuel connector used for?\u003c\/strong\u003e The Sierra 18-80415 is a fuel connector designed to mate with Yamaha 8mm fuel line, providing a secure coupling point in the outboard fuel delivery system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-80415 replace the original Yamaha fuel connector?\u003c\/strong\u003e Yes, the Sierra 18-80415 directly replaces Yamaha fuel connectors 6E5-24305-05 and 6Y2-24305-05.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fuel line does this connector fit?\u003c\/strong\u003e It is sized for 5\/16 inch, or 8mm, fuel line, specifically for use with Yamaha 8mm fuel line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-80415 fuel connector made from?\u003c\/strong\u003e It is made from anodized aluminum with a machined exterior finish, giving it corrosion resistance for marine fuel system use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sierra 18-80415?\u003c\/strong\u003e The connector measures 5.75 x 2 x 1.5 inches and weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-80415 need a mating fitting to complete the connection?\u003c\/strong\u003e Yes, the Sierra 18-80415 mates with Sierra fitting 18-8077-1 to form the complete fuel line coupling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-80415 an OEM or aftermarket part?\u003c\/strong\u003e The 18-80415 is a Sierra-manufactured aftermarket fuel connector that is a direct equivalent to Yamaha OEM part numbers 6E5-24305-05 and 6Y2-24305-05.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces are included with the 18-80415?\u003c\/strong\u003e The Sierra 18-80415 fuel connector ships as a single piece.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connector type is the 18-80415?\u003c\/strong\u003e It is a coupling-type fuel connector, machined from anodized aluminum for a secure, leak-resistant fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I replace my fuel connector with the 18-80415?\u003c\/strong\u003e A cracked, worn, or leaking fuel connector can cause fuel leaks or poor engine performance; the Sierra 18-80415 is a direct-fit replacement that restores a tight seal in the Yamaha 8mm fuel line connection.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432335067,"sku":"SIE-18-80415","price":18.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-80415_lg__22651.1558132125.500.750.jpg?v=1785188081"},{"product_id":"sierra-18-80412-male-fuel-line-connector-5-16-in-hose-replaces-mercury-22-816856t2-fits-mercury-mariner-75-125-hp-jet-outboards","title":"Sierra 18-80412 Fuel Tank Connector, 1\/4 Inch NPT Female, Replaces 22-816856T2, Fits Mercury 65-125 HP Outboards","description":"\u003cp\u003eThe Sierra 18-80412 is a fuel tank connector used to join the fuel tank fitting to the engine-side fuel hose on compatible outboard motors. It features a 1\/4 inch NPT female thread on the tank side and mates with a 5\/16 inch male hose connector, allowing a secure, leak-resistant connection between the tank fitting and the fuel line. The connector is built from metal with a machined exterior finish and a white color, giving it a durable, corrosion-resistant construction suited to marine fuel system use.\u003c\/p\u003e\u003cp\u003eThis connector is a direct replacement for OEM part 22-816856T2 and is designed to restore proper fuel connector function on outboards that use this fitting. It mates with the separate Sierra 18-80410-1 connector to complete the full fuel line hookup. The 18-80412 fits a range of Mercury outboard engines, including 4-cylinder, 3-cylinder, and jet drive models spanning multiple horsepower ratings, making it a common replacement part for fuel system repairs and maintenance on these engines.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-80412\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/4 inch NPT (Female)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Connector Size:\u003c\/strong\u003e 5\/16 inch (Male)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Quick-Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282227470\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMates With:\u003c\/strong\u003e 18-80410-1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury 100 HP 4-cylinder (1988-99)\u003c\/li\u003e\n\u003cli\u003eMercury 115 HP 4-cylinder (1989 \u0026amp; up)\u003c\/li\u003e\n\u003cli\u003eMercury 125 HP 4-cylinder (1994 \u0026amp; up)\u003c\/li\u003e\n\u003cli\u003eMercury 65 Jet (1994 \u0026amp; up)\u003c\/li\u003e\n\u003cli\u003eMercury 75 HP 3-cylinder (1987 \u0026amp; up)\u003c\/li\u003e\n\u003cli\u003eMercury 80 Jet (1994 \u0026amp; up)\u003c\/li\u003e\n\u003cli\u003eMercury 90 HP 3-cylinder (1987 \u0026amp; up)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e22-816856T2\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does the Sierra 18-80412 fuel tank connector use?\u003c\/strong\u003e The Sierra 18-80412 has a 1\/4 inch NPT female thread on the tank side, which screws into the fuel tank fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-80412 replace Mercury part 22-816856T2?\u003c\/strong\u003e Yes, the Sierra 18-80412 is a direct replacement for OEM part 22-816856T2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outboard engines fit the Sierra 18-80412 fuel connector?\u003c\/strong\u003e It fits Mercury 100 HP 4-cylinder outboards (1988-99), 115 HP 4-cylinder (1989 \u0026amp; up), 125 HP 4-cylinder (1994 \u0026amp; up), 65 Jet (1994 \u0026amp; up), 75 HP 3-cylinder (1987 \u0026amp; up), 80 Jet (1994 \u0026amp; up), and 90 HP 3-cylinder (1987 \u0026amp; up).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-80412 connector made from?\u003c\/strong\u003e The 18-80412 is made of metal with a white, machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sierra 18-80412?\u003c\/strong\u003e It measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-80412 fuel connector weigh?\u003c\/strong\u003e The Sierra 18-80412 weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat part does the 18-80412 connect to on the other side?\u003c\/strong\u003e It mates with the Sierra 18-80410-1 connector, a separate part with its own part number, to complete the fuel line hookup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-80412 a male or female fitting?\u003c\/strong\u003e The tank-side NPT thread on the 18-80412 is female, while the hose-side connector is a 5\/16 inch male fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of connector is the 18-80412?\u003c\/strong\u003e It is a quick-connect style fuel tank connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-80412?\u003c\/strong\u003e The 18-80412 fuel tank connector is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come with the 18-80412?\u003c\/strong\u003e The 18-80412 ships as a single connector fitting.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432367835,"sku":"SIE-18-80412","price":16.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-80412_lg__72166.1558131938.500.750.jpg?v=1785188709"},{"product_id":"sierra-18-8042-marine-hose-barb-fitting-1-4-barb-x-1-4-npt-male-machined-metal-fuel-line-connector","title":"Sierra 18-8042 Marine Fuel Hose Barb Fitting, 1\/4 Inch NPT Male Pipe Connector","description":"\u003cp\u003eThe Sierra 18-8042 is a male pipe hose barb fitting built for marine fuel line connections. One end has a 1\/4 inch NPT male pipe thread that screws into a fuel pump, fuel line fitting, or other threaded port, while the other end is a 1\/4 inch (6.35 mm) hose barb that a fuel hose pushes onto and is secured with a hose clamp. The fitting is machined from metal for a durable, corrosion-resistant connection point in the fuel system, with a machined finish. Sierra engineers this hose barb to meet or exceed the performance of the original equipment part it replaces, and Sierra supplies parts like this one to OEM engine manufacturers and boat builders. It is commonly used in outboard fuel line assemblies where a compact, single-piece NPT-to-barb connector is needed to join rigid threaded fittings to flexible fuel hose. The 18-8042 ships as a single piece and is compact at roughly 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8042\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Male Pipe Hose Barb Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type:\u003c\/strong\u003e Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNPT Size:\u003c\/strong\u003e 1\/4 inch (6.35 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Size:\u003c\/strong\u003e 1\/4 inch (6.35 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multicolored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 piece\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-8042 used for?\u003c\/strong\u003e The 18-8042 is a hose barb fitting that connects a marine fuel hose to a threaded NPT port, such as a fuel pump or fuel line fitting, making it a common connector in outboard fuel line assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the 18-8042 fit?\u003c\/strong\u003e It has a 1\/4 inch (6.35 mm) hose barb, so it is sized for 1\/4 inch inside-diameter fuel hose that is pushed onto the barb and secured with a hose clamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size is on the Sierra 18-8042?\u003c\/strong\u003e The threaded end is 1\/4 inch NPT male pipe thread, which screws into a matching female NPT port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8042 a male or female fitting?\u003c\/strong\u003e The NPT end of the 18-8042 is male pipe thread, meaning it threads into a female-threaded port; the opposite end is a barb, not a threaded connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-8042 made from?\u003c\/strong\u003e This hose barb fitting is machined from metal with a machined finish for durability in the marine fuel system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-8042 weigh?\u003c\/strong\u003e The Sierra 18-8042 weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-8042 hose barb?\u003c\/strong\u003e The fitting measures approximately 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in a package of the 18-8042?\u003c\/strong\u003e The 18-8042 is sold as a single piece.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sierra manufacture this part to OEM standards?\u003c\/strong\u003e Yes, Sierra engineers the 18-8042 to meet or exceed the performance of the original equipment part it replaces, and Sierra supplies parts to OEM engine manufacturers and boat builders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 18-8042 installed?\u003c\/strong\u003e Thread the 1\/4 inch NPT end of the 18-8042 into the mating port, then push the fuel hose onto the 1\/4 inch barb end and secure it with a hose clamp.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432400603,"sku":"SIE-18-8042","price":6.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-8042__51482.1722493418.500.750.jpg?v=1785189014"},{"product_id":"sierra-18-8056-fuel-connector-5-16-hose-barb-fits-johnson-evinrude-outboards-replaces-omc-174508-775640","title":"Sierra 18-8056 Fuel Connector, Replaces OMC 174508 775640, Johnson\/Evinrude","description":"\u003cp\u003eThe Sierra 18-8056 is a quick-connect fuel connector designed for Johnson\/Evinrude outboard fuel systems. It provides a secure, leak-resistant coupling point in the fuel line, allowing fast connection and disconnection of the fuel supply without tools. The fitting uses a quick-connect style inlet, letting boaters attach or detach the fuel line hose end quickly for maintenance, winterization, or engine removal. This connector is designed to mate with the Sierra 18-8063 fitting to complete a matched connector set, ensuring a proper seal between the two halves of the fuel line coupling.\u003c\/p\u003e\u003cp\u003eBuilt to replace OEM Johnson\/Evinrude (OMC) fuel connectors, the 18-8056 is a direct-fit replacement part for boat owners performing routine fuel system repairs or upgrades. Its compact size keeps it unobtrusive in tight engine compartments, and its automatic operation mode means it seals the fuel line automatically when disconnected, reducing spills during servicing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8056\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Quick Connect Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Rear Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGas Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282368937\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Taiwan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJohnson\/Evinrude outboard fuel systems\u003c\/li\u003e\n\u003cli\u003eMates with Sierra 18-8063 fuel connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e174508\u003c\/li\u003e\n\u003cli\u003e775640\u003c\/li\u003e\n\u003cli\u003eOMC 174508\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines is the Sierra 18-8056 fuel connector designed for?\u003c\/strong\u003e The Sierra 18-8056 fuel connector is designed for Johnson\/Evinrude outboard fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-8056 replace?\u003c\/strong\u003e It replaces OMC (Johnson\/Evinrude) part numbers 174508 and 775640.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-8056 need a matching connector?\u003c\/strong\u003e Yes, the 18-8056 is designed to mate with the Sierra 18-8063 fuel connector to complete the coupling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this fuel connector?\u003c\/strong\u003e The Sierra 18-8056 measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-8056 fuel connector weigh?\u003c\/strong\u003e It weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a quick-connect or threaded fitting?\u003c\/strong\u003e The 18-8056 uses a quick-connect style fitting, allowing the fuel line to be attached or detached without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-8056?\u003c\/strong\u003e The order includes one Sierra 18-8056 fuel connector; the mating 18-8063 connector is a separate part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8056 an OEM or aftermarket part?\u003c\/strong\u003e The 18-8056 is an aftermarket replacement part built to match the fit and function of the original OMC 174508 and 775640 fuel connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fuel connector seal automatically when disconnected?\u003c\/strong\u003e Yes, the 18-8056 operates automatically, sealing the line when the connector is disconnected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of fuel is this connector rated for?\u003c\/strong\u003e The 18-8056 is rated for use with gasoline fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Sierra 18-8056 manufactured?\u003c\/strong\u003e The 18-8056 fuel connector is manufactured in Taiwan.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432433371,"sku":"SIE-18-8056","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-8056__59450.1737868743.500.750.jpg?v=1785189045"},{"product_id":"marine-snapper-clamp-size-10-replaces-johnson-evinrude-omc-911616-fits-597-665-in-fuel-line-pack-of-10","title":"Sierra 18-8034-9 Snapper Clamp, Size 12, Clamp Range.670 -.780 Inch, Pack of 10","description":"\u003cp\u003eThe Sierra 18-8034-9 Snapper Clamp is a size 12 hose clamp built for marine fuel line and hose connections that require a secure, corrosion-resistant seal. Each package contains 10 clamps, making it a convenient stock-up option for boat owners, technicians, and shops that service multiple fuel line connections during the same job. The clamp closes over a range of.670 inch to.780 inch (17mm to 19.8mm), matching hose diameters commonly found on marine fuel systems.\u003c\/p\u003e\u003cp\u003eConstructed from metal alloy, the 18-8034-9 is designed for the demanding marine environment where hose clamps are exposed to fuel, moisture, and vibration. It is built to meet or exceed the performance of the original equipment part it replaces, giving installers a dependable aftermarket option without sacrificing fit or clamping force. Each individual clamp measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003eThis clamp is cross-referenced to original equipment part number 329654, so it is a direct fit wherever that OEM number is called for. Whether replacing worn-out clamps during routine fuel line maintenance or completing a full fuel system rebuild, the pack-of-10 quantity means you have enough clamps on hand to finish the job without ordering again.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8034-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamp Size:\u003c\/strong\u003e 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamp Range:\u003c\/strong\u003e 0.670 inch to 0.780 inch (17mm to 19.8mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 329654, 3852196\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Fuel Lines \u0026amp; Hoses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits applications originally using clamp size 12 in the.670 inch to.780 inch clamping range, including OEM part number 329654.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e329654\u003c\/li\u003e\n\u003cli\u003e3852196\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sierra 18-8034-9 clamp?\u003c\/strong\u003e The Sierra 18-8034-9 is a size 12 clamp with a clamping range of.670 inch to.780 inch (17mm to 19.8mm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many clamps come in a package?\u003c\/strong\u003e Each package of the Sierra 18-8034-9 Snapper Clamp contains 10 clamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does this clamp cross-reference to?\u003c\/strong\u003e The Sierra 18-8034-9 is interchangeable with OEM part numbers 329654 and 3852196.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-8034-9 clamp made from?\u003c\/strong\u003e It is made from metal alloy, suited to the corrosive marine environment where fuel line clamps are used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of a single clamp?\u003c\/strong\u003e Each Sierra 18-8034-9 clamp measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the package weigh?\u003c\/strong\u003e The Sierra 18-8034-9 Snapper Clamp package weighs 0.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an OEM part or an aftermarket replacement?\u003c\/strong\u003e The Sierra 18-8034-9 is an aftermarket clamp designed to meet or exceed the performance of the original equipment part it replaces, including OEM number 329654.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this clamp used for?\u003c\/strong\u003e This size 12 clamp is used to secure marine fuel line and hose connections that fall within its.670 inch to.780 inch clamping range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to buy clamps individually or as a set?\u003c\/strong\u003e The Sierra 18-8034-9 is sold in a package of 10, so no individual-unit purchase is needed for jobs requiring multiple clamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the 18-8034-9 clamp?\u003c\/strong\u003e The 18-8034-9 Snapper Clamp is made by Sierra.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432466139,"sku":"SIE-18-8034-9","price":9.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-8034-9__63763.1737852800.500.750_c8994b23-4f09-4805-b206-66e3cf45ae1b.jpg?v=1785188100"},{"product_id":"sierra-18-80419-fuel-connector-for-suzuki-df25-df140-outboards-5-16-in-replaces-oem-65750-87j10","title":"Sierra Fuel Connector 18-80419, Replaces 65720-986B0, Fits Suzuki DF25-DF140 Outboards","description":"\u003cp\u003eThe Sierra 18-80419 is a 5\/16 inch fuel connector fitting built for Suzuki DF25-DF140 outboard fuel systems. It serves as the quick-connect fitting in the fuel line circuit, letting the fuel hose join and disconnect from the engine or tank side without tools, which simplifies routine maintenance, hose replacement, and engine winterization. The connector measures 0.39 x 0.39 x 0.39 inches and is finished in white. It is designed to mate with companion connector 18-80404, so the pair forms a complete matched fuel line connection set on applicable Suzuki outboard installations. As a direct-fit replacement for the OEM Suzuki fitting, it restores a tight, leak-free seal in the fuel line where the original connector has worn, cracked, or lost its sealing ability. Because fuel connectors see constant handling and exposure to ethanol-blended fuels, replacing a worn unit with the correct Sierra part helps prevent fuel leaks, poor engine starting, and fuel delivery problems caused by a failed seal at the connection point.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-80419\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Size:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Suzuki DF25-DF140 outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 65720-986B0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Companion Part:\u003c\/strong\u003e 18-80404\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSuzuki DF25-DF140 outboards\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e65720-986B0\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-80419 fuel connector fit?\u003c\/strong\u003e The Sierra 18-80419 fuel connector is designed for Suzuki DF25-DF140 outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part does the 18-80419 replace?\u003c\/strong\u003e This connector replaces OEM Suzuki part number 65720-986B0.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the fuel connector fitting?\u003c\/strong\u003e The Sierra 18-80419 has a 5\/16 inch connector size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-80419 connector?\u003c\/strong\u003e It measures 0.39 x 0.39 x 0.39 inches, a compact inline fuel line fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-80419 need a matching part to complete the fuel line connection?\u003c\/strong\u003e Yes, the Sierra 18-80419 mates with companion connector 18-80404 to form the complete fuel line connection set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-80419 fuel connector?\u003c\/strong\u003e The 18-80419 fuel connector is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-80419 a genuine Suzuki part or an aftermarket replacement?\u003c\/strong\u003e The 18-80419 is a Sierra-manufactured replacement part, not an original Suzuki-branded component, and it is built to replace OEM Suzuki part 65720-986B0.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-80419 fuel connector weigh?\u003c\/strong\u003e The Sierra 18-80419 weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-80419 be used on both sides of the fuel line?\u003c\/strong\u003e The 18-80419 is one half of a matched connector pair; it is designed to mate specifically with part 18-80404 to complete the fuel line circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace this fuel connector?\u003c\/strong\u003e A worn, cracked, or leaking fuel connector like the 18-80419 should be replaced to maintain a tight, leak-free seal in the Suzuki outboard fuel line.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432498907,"sku":"SIE-18-80419","price":17.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-80419_lg__49073.1558132304.500.750.jpg?v=1785188028"},{"product_id":"3-8-fuel-connector-for-honda-outboard-8-130-hp-2001-02-replaces-17700-zw9-010-sierra-18-8062-fuel-line-fitting","title":"Sierra 18-8062 Fuel Connector, 3\/8 Inch Barb, Replaces 197787-3, Mates with 18-8071","description":"\u003cp\u003eThe Sierra 18-8062 is a fuel connector with a 3\/8 inch barb fitting, designed to join fuel line to the mating half of a marine fuel connector set. It is built from brass and stainless steel with a machined silver finish for corrosion resistance in a marine fuel system environment. The connector mates with Sierra 18-8071, so it should be paired with that part number to complete the connection. This part is commonly used in Suzuki outboard fuel line and fitting applications. It directly replaces OEM number 197787-3, making it a straightforward swap when repairing or upgrading a fuel line connection. The compact body measures approximately 0.39 x 0.39 x 0.39 inches and weighs 0.1 pounds, so it adds minimal bulk to a fuel line run. Sierra parts are backed by Sierra's standard customer satisfaction warranty coverage.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8062\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Fuel Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Size:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass, Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Silver, Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMates With:\u003c\/strong\u003e Sierra 18-8071\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 197787-3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eCommonly used in Suzuki outboard fuel line and fitting applications. Pairs with Sierra 18-8071 to complete the connector set.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e197787-3\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-8062 fuel connector replace?\u003c\/strong\u003e It directly replaces OEM part number 197787-3, so it can be installed as a like-for-like swap for that original connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size barb fitting does this connector use?\u003c\/strong\u003e The 18-8062 has a 3\/8 inch barb fitting for connecting to fuel line of that size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 18-8062 made of?\u003c\/strong\u003e It is constructed from brass and stainless steel with a machined silver finish, materials chosen for durability in a marine fuel system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-8062 need a matching part to work?\u003c\/strong\u003e Yes, this connector mates with Sierra part number 18-8071 to form a complete fuel connector set; the two should be ordered together if you do not already have the mating half.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the 18-8062?\u003c\/strong\u003e The Sierra 18-8062 fuel connector measures approximately 0.39 x 0.39 x 0.39 inches and weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8062 a genuine Sierra part or aftermarket?\u003c\/strong\u003e The 18-8062 is a genuine Sierra part, covered under Sierra's standard customer satisfaction warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat or engine applications use the 18-8062?\u003c\/strong\u003e This fuel connector is commonly used in Suzuki outboard fuel line and fitting applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come with the 18-8062?\u003c\/strong\u003e The 18-8062 fuel connector is sold as a single piece (1 count).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type does the 18-8062 use?\u003c\/strong\u003e The connector uses NPT thread type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-8062 fit if my old fuel connector is labeled 197787-3?\u003c\/strong\u003e Yes, the Sierra 18-8062 is a direct replacement for OEM number 197787-3.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432531675,"sku":"SIE-18-8062","price":12.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8062_lg__45039.1558130625.500.750.jpg?v=1785188274"},{"product_id":"sierra-18-80420-fuel-connector-for-honda-bf5-bf8a-outboards-2001-earlier-replaces-honda-17650-921-003zb","title":"Sierra 18-80420 Fuel Connector, 3\/8 Inch Hose Barb, Replaces 17660-ZV5-902, Honda Outboard","description":"\u003cp\u003eThe Sierra 18-80420 is a fuel connector built for Honda outboard fuel systems, providing a secure link between fuel line sections using a 3\/8 inch hose barb fitting. It is designed to mate with the Sierra 18-80406 connector, making it a matched-pair replacement for worn or cracked factory connectors in the fuel delivery line. The connector is molded from durable plastic that resists degradation from exposure to gasoline and the marine environment, helping maintain a tight, leak-resistant seal at the hose joint.\u003c\/p\u003e\u003cp\u003eAs a direct replacement for OEM Honda part 17660-ZV5-902, the 18-80420 lets boat owners and technicians restore factory-correct fuel line connections without sourcing the connector through a dealer. Its compact size keeps it easy to fit into tight engine compartment spaces, and its low weight makes it simple to handle during installation. Every Sierra fuel connector is backed by Sierra's standard limited warranty, giving buyers confidence in fit and function for their Honda outboard fuel system repair or maintenance job.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-80420\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type:\u003c\/strong\u003e 3\/8 inch hose barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMates With:\u003c\/strong\u003e Sierra 18-80406\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1.88 x 1.31 x 5.56 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Honda outboard fuel systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282227548\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 17660-ZV5-902\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe Sierra 18-80420 fuel connector is intended for Honda outboard fuel line systems and uses a 3\/8 inch hose barb connection. It is designed to mate with the Sierra 18-80406 fuel connector to complete the fuel line joint.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e17660-ZV5-902\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part does the Sierra 18-80420 fuel connector replace?\u003c\/strong\u003e The Sierra 18-80420 fuel connector directly replaces OEM Honda part number 17660-ZV5-902.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the 18-80420 fuel connector fit?\u003c\/strong\u003e It fits a 3\/8 inch hose barb connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-80420 need another part to complete the connection?\u003c\/strong\u003e Yes, the Sierra 18-80420 is designed to mate with the Sierra 18-80406 fuel connector to complete the fuel line joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-80420 fuel connector made from?\u003c\/strong\u003e It is made from plastic that is designed to hold up to fuel exposure and the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-80420 weigh?\u003c\/strong\u003e The 18-80420 fuel connector weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-80420 fuel connector?\u003c\/strong\u003e It measures 1.88 x 1.31 x 5.56 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-80420 a genuine Honda part or an aftermarket replacement?\u003c\/strong\u003e It is an aftermarket replacement made by Sierra, engineered to match the fit and function of OEM Honda part 17660-ZV5-902.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines is the 18-80420 fuel connector used with?\u003c\/strong\u003e The 18-80420 is designed for use in Honda outboard fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the 18-80420?\u003c\/strong\u003e Each order includes one Sierra 18-80420 fuel connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-80420 fuel connector covered by a warranty?\u003c\/strong\u003e Yes, the 18-80420 is covered under Sierra's standard limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-80420 fuel connector?\u003c\/strong\u003e The Sierra 18-80420 fuel connector has UPC 808282227548.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432564443,"sku":"SIE-18-80420","price":25.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-80420_lg__71418.1713183420.500.750.jpg?v=1785188287"},{"product_id":"female-fuel-line-connector-5-16-in-for-mercury-mariner-outboards-replaces-22831q3-sierra-18-8069","title":"Sierra 18-8069 Female Fuel Connector, 5\/16 Inch, Replaces 22831Q3 - Mercury Outboard","description":"\u003cp\u003eThe Sierra 18-8069 is a 5\/16 inch female fuel connector built for Mercury outboard fuel line systems. It is the female half of a twist-lock fuel line coupling, designed to mate with the corresponding male connector to create a secure, leak-resistant seal at the fuel line disconnect point between the tank and the outboard motor. The connector is machined from brass for corrosion resistance and long service life in a marine fuel environment, with 5\/16 inch NPT threading for connection to standard fuel line hose.\u003c\/p\u003e\u003cp\u003eThis female connector mates with the Sierra 18-80410-1 male connector to complete the fuel line coupling. It is a direct cross-reference replacement for several factory female fuel connectors used across a range of Mercury outboard motors, making it a straightforward swap when a factory connector is worn, cracked, or no longer sealing properly. Fitment covers Mercury 125 4-cyl. (1994 and up), 65 Jet (1994 and up), 75 3-cyl. (1987 and up), 80 Jet (1994 and up), and 90 3-cyl. (1987 and up) outboards.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8069\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMates With:\u003c\/strong\u003e 18-80410-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6 x 3 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.36 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury 125 4-cyl. (1994 \u0026amp; up)\u003c\/li\u003e\n\u003cli\u003eMercury 65 Jet (1994 \u0026amp; up)\u003c\/li\u003e\n\u003cli\u003eMercury 75 3-cyl. (1987 \u0026amp; up)\u003c\/li\u003e\n\u003cli\u003eMercury 80 Jet (1994 \u0026amp; up)\u003c\/li\u003e\n\u003cli\u003eMercury 90 3-cyl. (1987 \u0026amp; up)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e22831Q3\u003c\/li\u003e\n\u003cli\u003e22831A3\u003c\/li\u003e\n\u003cli\u003e22831A4\u003c\/li\u003e\n\u003cli\u003e22831B3\u003c\/li\u003e\n\u003cli\u003e22831A1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-8069 fuel connector?\u003c\/strong\u003e It is a 5\/16 inch female fuel connector used in Mercury outboard fuel line systems, forming the female half of a twist-lock coupling between the fuel tank line and the outboard motor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Mercury outboards does the 18-8069 fit?\u003c\/strong\u003e The 18-8069 fits Mercury 125 4-cyl. (1994 \u0026amp; up), 65 Jet (1994 \u0026amp; up), 75 3-cyl. (1987 \u0026amp; up), 80 Jet (1994 \u0026amp; up), and 90 3-cyl. (1987 \u0026amp; up) outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-8069 replace?\u003c\/strong\u003e This connector replaces OEM numbers 22831Q3, 22831A3, 22831A4, 22831B3, and 22831A1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8069 a male or female connector?\u003c\/strong\u003e The 18-8069 is a female fuel connector. The corresponding male connector for this coupling is a separate part, the Sierra 18-8070.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fuel line does the 18-8069 use?\u003c\/strong\u003e The 18-8069 is sized for 5\/16 inch fuel line with NPT threading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-8069 fuel connector made of?\u003c\/strong\u003e It is machined from brass, which resists corrosion in a marine fuel line environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-8069 need a matching male connector?\u003c\/strong\u003e Yes, the 18-8069 female connector mates with the Sierra 18-80410-1 male connector to complete the fuel line coupling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-8069 weigh?\u003c\/strong\u003e The Sierra 18-8069 fuel connector weighs 0.36 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-8069 be used as a direct replacement for a worn factory connector?\u003c\/strong\u003e Yes, since it replaces OEM numbers 22831Q3, 22831A3, 22831A4, 22831B3, and 22831A1, it can be installed in place of any of those factory female fuel connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connector type is listed for the 18-8069?\u003c\/strong\u003e The 18-8069 is listed as a twist lock type female connector, 5\/16 inch in size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-8069 fuel connector?\u003c\/strong\u003e The 18-8069 has item dimensions of 6 x 3 x 1.5 inches.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432662747,"sku":"SIE-18-8069","price":20.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-8069__25895.1729631989.500.750.jpg?v=1785188521"},{"product_id":"sierra-18-80425-fuel-connector-for-suzuki-df25-df140-outboards-replaces-oem-65720-986b0","title":"Sierra Fuel Connector 18-80425, Replaces Suzuki 65720-986B0, Fits DF25-DF140","description":"\u003cp\u003eThe Sierra 18-80425 is a fuel connector fitting designed for Suzuki outboard fuel systems, engineered to join the fuel line to the engine or primer bulb assembly with a secure, leak-resistant connection. It is built for Suzuki DF25 through DF140 outboard applications and mates directly with the Sierra 18-80404 and 18-80419 fuel line connectors, making it the correct match when replacing or completing a fuel line set on these engines. This connector replaces the Suzuki OEM part number 65720-986B0, so it restores fuel connection function to factory specification without altering how the fuel system operates. Constructed as a compact fitting, it measures 0.39 x 0.39 x 0.39 inches and weighs 0.08 pounds, keeping it lightweight while maintaining a durable seal at the connection point. Boat owners and marine technicians use this connector when a fuel line fitting has cracked, lost its seal, or is being replaced as routine maintenance on Suzuki DF-series outboards. Because it is sold as the specific mating half of the connector system, confirming the corresponding connector (18-80404 or 18-80419) already installed on the fuel line or engine side ensures a proper fit. Always inspect the surrounding fuel line and O-rings when installing a new connector to ensure the full fuel delivery path is sound.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-80425\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Fuel Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMates With:\u003c\/strong\u003e Sierra 18-80404 and 18-80419\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Suzuki DF25-DF140 outboards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSuzuki DF25-DF140 outboard engines\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSuzuki 65720-986B0\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-80425 fuel connector fit?\u003c\/strong\u003e It is designed for Suzuki DF25 through DF140 outboard engines, connecting the fuel line to the engine's fuel system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does the 18-80425 replace?\u003c\/strong\u003e It replaces Suzuki OEM part number 65720-986B0, restoring the fuel connection to factory specification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-80425 a genuine Sierra part or an aftermarket copy?\u003c\/strong\u003e The 18-80425 is a Sierra-branded fuel connector manufactured to match the fit and function of the original Suzuki fitting it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this fuel connector?\u003c\/strong\u003e The 18-80425 measures 0.39 x 0.39 x 0.39 inches, a compact fitting sized for direct installation in the fuel line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-80425 fuel connector weigh?\u003c\/strong\u003e It weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other Sierra parts does the 18-80425 connect with?\u003c\/strong\u003e The 18-80425 mates with the Sierra 18-80404 and 18-80419 fuel line connectors to complete the fuel connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace anything else when installing the 18-80425?\u003c\/strong\u003e No additional parts are required beyond the connector itself, but inspecting the mating connector (18-80404 or 18-80419) and surrounding fuel line for wear is recommended during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-80425 work on any Suzuki outboard?\u003c\/strong\u003e It is fitted specifically for the Suzuki DF25-DF140 range; it is not intended for outboard models outside that range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-80425?\u003c\/strong\u003e The order includes one Sierra 18-80425 fuel connector fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace a fuel connector like the 18-80425?\u003c\/strong\u003e Fuel connectors like the 18-80425 are typically replaced when the original fitting cracks, wears out, or loses its seal, which can cause fuel leaks or poor fuel flow.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432695515,"sku":"SIE-18-80425","price":26.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-80425_lg__43869.1558132503.500.750.jpg?v=1785188720"},{"product_id":"fuel-connector-for-yamaha-6-40hp-outboards-replaces-oem-6g1-24305-05-fits-6mm-fuel-line-sierra-18-80414","title":"Sierra 18-80414 Fuel Connector, Replaces Yamaha 6G1-24305-05-00 \/ 6G1-24305-04, for Yamaha 6mm Fuel Line Outboards","description":"\u003cp\u003eThe Sierra 18-80414 is a machined fuel connector built for use with Yamaha 6mm fuel line on a wide range of Yamaha outboard motors. It is the fitting that joins the fuel line to the engine's fuel system, and it is manufactured to a 1\/4 inch (6mm) size to mate correctly with Yamaha 6mm fuel line. The connector has a machined exterior finish for a precise, durable fit at the connection point, helping maintain a secure seal in the fuel delivery system.\u003c\/p\u003e\u003cp\u003eThis connector is a direct replacement for the Yamaha OEM fuel connectors 6G1-24305-05-00 and 6G1-24305-04, and it is designed to mate with Sierra 18-8077-1 and 18-80415 fuel system components. It covers a broad Yamaha outboard fitment range spanning multiple horsepower classes and model years, including standard, C-series, F-series (four-stroke), and T-series (tiller) Yamaha outboards, making it a practical stocking item for anyone servicing multiple Yamaha engines.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-80414\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Fuel Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/4 inch (6mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5.75 x 2 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282227494\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Fuel Line:\u003c\/strong\u003e Yamaha 6mm fuel line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMates With:\u003c\/strong\u003e 18-8077-1, 18-80415\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Yamaha outboards: 6 HP (1989, 1992-93), 8 HP (1984-85, 1989-93, 2001-02), 9.9 HP (1984-93, 2000-03), 15 HP (1984-93, 2000-03), 25 HP (1984-85, 1988-93, 2000-03), 30 HP (1984-87, 1989-93, 1999, 2001-02), 40 HP (1984-86, 1988-90, 1992-93, 2000-03), 50 HP (1986-93, 2000-03), 60 HP (2001-03), 70 HP (1984-93, 2000-03), 90 HP (1984-93, 2000-03), C25 (1991, 1993), C30 (1991-93), C40 (1991-93, 2000-02), C50 (2000-01), C55 (1991-93), C60 (2000-01), C70 (2000-01), C85 (1991-93), C90 (2000-01), E48 (2000), F6 (2001-03), F8 (2001-03), F9.9 (1985-93, 2001-03), F15 (1998-99, 2000-01), F25 (1998-99, 2000-03), F30 (2001-03), F40 (1999, 2000-03), F50 (1999, 2000-03), F60 (2002-03), T8 (2001-03), T9.9 (1991-93, 1999, 2001-03), T25 (2001-03), T50 (1999, 2000-03), T60 (2003).\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6G1-24305-05-00\u003c\/li\u003e\n\u003cli\u003e6G1-24305-04\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-80414 fuel connector fit?\u003c\/strong\u003e The Sierra 18-80414 fits a wide range of Yamaha outboards including 6, 8, 9.9, 15, 25, 30, 40, 50, 60, 70, and 90 HP models, as well as C-series, F-series, T-series, and the E48, across multiple model years listed for each engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-80414 replace?\u003c\/strong\u003e It replaces Yamaha fuel connector part numbers 6G1-24305-05-00 and 6G1-24305-04.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fuel line does this connector use?\u003c\/strong\u003e The 18-80414 is sized 1\/4 inch (6mm) and is designed for use with Yamaha 6mm fuel line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-80414 fuel connector weigh?\u003c\/strong\u003e It weighs 0.09 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sierra 18-80414?\u003c\/strong\u003e The connector measures 5.75 x 2 x 1.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the exterior finish of this fuel connector?\u003c\/strong\u003e It has a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-80414 a genuine OEM part or aftermarket?\u003c\/strong\u003e The 18-80414 is a Sierra-manufactured fuel connector produced as a replacement for Yamaha OEM part numbers 6G1-24305-05-00 and 6G1-24305-04, not an original Yamaha-branded part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-80414 work with other Sierra fuel system parts?\u003c\/strong\u003e Yes, the 18-80414 mates with Sierra parts 18-8077-1 and 18-80415.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the F-series Yamaha outboard use the same connector as the standard models?\u003c\/strong\u003e Yes, the Sierra 18-80414 covers both standard Yamaha models (such as 25 and 40 HP) and the F-series four-stroke models (such as F25 and F40), as listed in its fitment range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 18-80414 fuel connector?\u003c\/strong\u003e The listing is for a single Sierra 18-80414 fuel connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-80414 fit a Yamaha C-series outboard?\u003c\/strong\u003e Yes, the fitment for the Sierra 18-80414 includes Yamaha C-series outboards such as C25, C30, C40, C50, C55, C60, C70, C85, and C90 for the years listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-80414 fit Yamaha tiller (T-series) outboards?\u003c\/strong\u003e It does; the Sierra 18-80414 fitment includes Yamaha T-series outboards T8, T9.9, T25, T50, and T60.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432728283,"sku":"SIE-18-80414","price":17.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-80414_lg__84762.1611588884.500.750.jpg?v=1785188863"},{"product_id":"sierra-18-8071-fuel-tank-connector-1-4-in-npt-male-replaces-suzuki-99105-00192-fits-suzuki-chrysler-force-honda-outboards","title":"Sierra 18-8071 Fuel Tank Connector, 1\/4 Inch NPT Male, Replaces Suzuki 99105-00192","description":"\u003cp\u003eThe Sierra 18-8071 is a male fuel tank connector built for outboard fuel line assemblies. It threads into the fuel tank fitting with a 1\/4 inch NPT male connection and has a 0.432 inch outer diameter, matching the dimensions of the original Suzuki fitting it replaces. The connector is made of metal with a silver finish, giving it the corrosion resistance needed for a marine fuel environment. It is designed for use on Suzuki outboard motors and cross-references directly to Suzuki OEM part number 99105-00192, making it a straightforward swap when the original tank-side connector is worn, cracked, or leaking. The 18-8071 mates with the corresponding fuel-line-side connector to complete the quick-disconnect fuel coupling between the tank and the engine's fuel line, and it is suited for 4-stroke gasoline outboard applications. At 0.06 pounds, it is a small, precise fitting meant to be replaced as a set with its mating connector when rebuilding a fuel line assembly. Choosing the correct connector, thread size, and outer diameter matters for a leak-free seal, so confirm your existing tank connector matches this 1\/4 inch NPT male, 0.432 inch O.D. Specification before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8071\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/4 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter:\u003c\/strong\u003e 0.432 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Type:\u003c\/strong\u003e 4 Stroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe Sierra 18-8071 is designed for Suzuki outboard motors.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSuzuki 99105-00192\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-8071 fuel tank connector fit?\u003c\/strong\u003e The Sierra 18-8071 is designed for Suzuki outboard motors and cross-references to Suzuki part number 99105-00192.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8071 a male or female connector?\u003c\/strong\u003e It is a male connector with a 1\/4 inch NPT thread, sized to fit into the corresponding female fitting on the fuel line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outer diameter of the 18-8071?\u003c\/strong\u003e The Sierra 18-8071 has an outer diameter of 0.432 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-8071 made from?\u003c\/strong\u003e It is made of metal and finished in silver for durability in a marine fuel environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-8071 replace Suzuki part 99105-00192?\u003c\/strong\u003e Yes, the Sierra 18-8071 tank connector replaces Suzuki OEM part number 99105-00192.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-8071 tank connector weigh?\u003c\/strong\u003e The Sierra 18-8071 weighs 0.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does the 18-8071 use?\u003c\/strong\u003e It uses a 1\/4 inch NPT thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8071 a genuine or aftermarket part?\u003c\/strong\u003e It is a genuine Sierra-brand part manufactured as a direct equivalent to the Suzuki OEM 99105-00192 tank connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when you order the 18-8071?\u003c\/strong\u003e One Sierra 18-8071 fuel tank connector is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-8071 be used on 4-stroke gasoline outboards?\u003c\/strong\u003e Yes, the Sierra 18-8071 is intended for use on 4-stroke gasoline outboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-8071 fit engines other than Suzuki?\u003c\/strong\u003e The Sierra 18-8071 cross-references specifically to Suzuki part 99105-00192, so confirm your outboard uses this fitting before ordering.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432761051,"sku":"SIE-18-8071","price":7.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8071_lg__91666.1558131050.500.750.jpg?v=1785188426"},{"product_id":"marine-fuel-connector-engine-end-for-tohatsu-nissan-5-90hp-2-stroke-tldi-outboards-replaces-3b2702501m-3-8-inch-hose","title":"Sierra 18-8088 Fuel Connector, Replaces 345-70250-0, Fits Nissan\/Tohatsu 5-90HP 2-Stroke TLDI Outboards","description":"\u003cp\u003eThe Sierra 18-8088 is a white, machined-finish fuel connector built for Nissan and Tohatsu outboard motors. It serves as the fuel line coupling point between the tank hose and the engine's fuel system, sized for 3\/8 inch hose and fitted with NPT threads for a secure, leak-resistant connection.\u003c\/p\u003e\u003cp\u003eThis connector is designed to fit 5-90HP 2-stroke and TLDI outboard models from Nissan and Tohatsu. It mates with Sierra part 18-8089 to complete the fuel line connection, and it directly replaces OEM number 345-70250-0, making it a straightforward swap for owners who need to restore or repair a worn or damaged factory fuel connector. Each unit ships individually, one connector per package, and weighs 2.5 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8088\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMates With:\u003c\/strong\u003e 18-8089\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 5-90HP, 2-stroke, TLDI models (Nissan\/Tohatsu)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282368791\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNissan\/Tohatsu 5-90HP, 2-stroke, TLDI models\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e345-70250-0\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-8088 fuel connector fit?\u003c\/strong\u003e The Sierra 18-8088 fuel connector fits 5-90HP 2-stroke and TLDI outboard engines from Nissan and Tohatsu.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8088 equivalent to OEM part 345-70250-0?\u003c\/strong\u003e Yes, the Sierra 18-8088 directly replaces OEM number 345-70250-0, making it a compatible substitute for that Nissan\/Tohatsu fuel connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does this fuel connector use?\u003c\/strong\u003e 3\/8 inch hose is the size this connector is built for, matching the fuel line diameter on compatible Nissan\/Tohatsu outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-8088 fuel connector?\u003c\/strong\u003e The 18-8088 ships in white with a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-8088 need a mating part to complete the connection?\u003c\/strong\u003e Yes, the 18-8088 mates with Sierra part 18-8089 to complete the fuel line connection; the two are sold as separate part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-8088 fuel connector weigh?\u003c\/strong\u003e This fuel connector weighs 2.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type does the 18-8088 use?\u003c\/strong\u003e NPT threads are used on the Sierra 18-8088 fuel connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many connectors come in one package?\u003c\/strong\u003e One Sierra 18-8088 fuel connector ships per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8088 a genuine Sierra part or a generic aftermarket copy?\u003c\/strong\u003e It is a Sierra-branded fuel connector sold under Sierra's own part number 18-8088, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-8088 be used on a 4-stroke Nissan outboard?\u003c\/strong\u003e No, the stated fitment for the 18-8088 covers 5-90HP 2-stroke and TLDI Nissan\/Tohatsu models, not 4-stroke engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-8088?\u003c\/strong\u003e The UPC for the Sierra 18-8088 fuel connector is 808282368791.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432793819,"sku":"SIE-18-8088","price":16.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8088_lg__77646.1558132004.500.750.jpg?v=1785189104"},{"product_id":"sierra-18-8085-fuel-connector-for-mercury-outboard-fuel-lines-mates-with-18-8077-1-tank-connector","title":"Sierra Fuel Connector 18-8085 for Mercury Outboard Fuel Line Systems","description":"\u003cp\u003eThe Sierra 18-8085 is a fuel connector built for use within Mercury outboard fuel line and fitting systems. It serves as a secure connection point in the outboard's fuel delivery line, letting boat owners maintain or replace a worn or damaged connector without reworking the surrounding fuel line assembly. As a Sierra branded part, it is manufactured to be a direct, drop-in fit for the connector it replaces, helping keep the fuel system sealed and functioning correctly. The 18-8085 is compact and lightweight at 0.06 pounds, consistent with other small fuel line fittings in this product class.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8085\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mercury Outboard Fuel Lines and Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282368890\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-8085 fuel connector used for?\u003c\/strong\u003e The Sierra 18-8085 is a fuel connector designed for use in Mercury outboard fuel line and fitting systems, providing a secure connection point in the fuel delivery line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-8085 fuel connector weigh?\u003c\/strong\u003e This connector weighs 0.06 pounds, making it a small, lightweight fuel system component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra part number for this fuel connector?\u003c\/strong\u003e Sierra part number 18-8085 identifies this fuel connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-8085 fuel connector?\u003c\/strong\u003e UPC 808282368890 corresponds to the Sierra 18-8085 fuel connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8085 a genuine Sierra part?\u003c\/strong\u003e Yes, the 18-8085 is a genuine Sierra branded fuel connector rather than a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-8085 fuel connector fit?\u003c\/strong\u003e The 18-8085 fuel connector is categorized for Mercury outboard fuel line and fitting applications; specific engine models are not listed, so confirm compatibility with your outboard's existing connector before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-8085 fuel connector made of?\u003c\/strong\u003e Material composition is not specified for the 18-8085 fuel connector in available product data.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the Sierra 18-8085?\u003c\/strong\u003e The 18-8085 ships as a single fuel connector fitting; no additional hardware or fuel line is included based on available product data.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install the Sierra 18-8085 fuel connector?\u003c\/strong\u003e Installation involves connecting the 18-8085 into the outboard's fuel line at the existing connector point; consult your engine's service manual for orientation and torque specifics, since detailed installation steps are not provided in available product data.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-8085 replace a specific OEM part number?\u003c\/strong\u003e No OEM cross-reference numbers are listed for the 18-8085 fuel connector in available product data.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432826587,"sku":"SIE-18-8085","price":9.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8085_lg__71307.1558131820.500.750.jpg?v=1785329160"},{"product_id":"sierra-18-8067-marine-fuel-elbow-3-8-barb-x-1-4-npt-90-degree-brass-fuel-line-fitting","title":"Sierra Fuel Elbow 18-8067, 90 Degree Brass, 3\/8 Inch Barb x 1\/4 Inch NPT","description":"\u003cp\u003eThe Sierra Fuel Elbow 18-8067 is a 90 degree brass fitting built to connect fuel line hose to a fuel port at a right angle, keeping the hose run tight and free of kinks in confined engine compartments. One end is a 3\/8 inch hose barb that a fuel line pushes onto, while the other end is a 1\/4 inch NPT threaded connection that screws directly into a fuel pump, carburetor, fuel filter, or fuel tank fitting. The elbow is machined from brass, a material chosen for fuel system fittings because it resists corrosion from ethanol-blended fuel and marine moisture better than many alternatives, while still holding a tight, reliable seal at the threaded joint.\u003c\/p\u003e\u003cp\u003eBecause the barb and NPT sizes on this elbow are common across many outboard and inboard fuel systems, it works as a general-purpose replacement or upgrade wherever a 3\/8 inch barb to 1\/4 inch NPT 90 degree connection is needed, rather than being tied to one specific engine model. Sierra part number 18-8067 identifies this exact fitting for ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8067\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Size:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/4 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282368852\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat angle is the Sierra 18-8067 fuel elbow?\u003c\/strong\u003e The Sierra 18-8067 is a 90 degree fuel elbow, designed to make a right-angle turn between the fuel line and the fitting it connects to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does this fitting accept?\u003c\/strong\u003e It has a 3\/8 inch hose barb on one end, sized to accept 3\/8 inch fuel line, which is pushed onto the barb and typically secured with a hose clamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size is on the other end of the elbow?\u003c\/strong\u003e The opposite end of the 18-8067 has a 1\/4 inch NPT thread, which screws into a fuel pump, filter, carburetor, or tank fitting with a matching 1\/4 inch NPT port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-8067 fuel elbow made from?\u003c\/strong\u003e Brass. The Sierra 18-8067 is a machined brass fitting, chosen for its corrosion resistance in marine fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-8067 a genuine Sierra part or aftermarket?\u003c\/strong\u003e It is a Sierra-branded fuel elbow, sold under Sierra part number 18-8067, not a generic unbranded fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-8067 fuel elbow?\u003c\/strong\u003e The Sierra 18-8067 measures 0.39 x 0.39 x 0.39 inches and weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-8067 fit a specific engine or is it universal?\u003c\/strong\u003e The 18-8067 uses a common 3\/8 inch barb by 1\/4 inch NPT thread combination, so it fits any fuel system with a matching 1\/4 inch NPT port rather than being limited to one engine model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 18-8067 attach to the fuel hose?\u003c\/strong\u003e The 3\/8 inch barb end of the Sierra 18-8067 is pushed into the fuel hose and should be secured with a properly sized hose clamp to prevent leaks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-8067 be used to replace a plastic fuel elbow fitting?\u003c\/strong\u003e Yes, the Sierra 18-8067 is a brass fitting with the same 3\/8 inch barb by 1\/4 inch NPT sizing used on many plastic fuel elbows, offering a more corrosion-resistant alternative in the same connection size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 18-8067 fuel elbow have?\u003c\/strong\u003e It has a machined brass finish, giving it a smooth, precisely formed threaded and barbed surface for a secure fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8067 threaded connection tapered or straight?\u003c\/strong\u003e The 1\/4 inch thread on the Sierra 18-8067 is NPT (National Pipe Tapered), which seals by wedging tightly as it is threaded into a matching tapered NPT port.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432859355,"sku":"SIE-18-8067","price":8.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8067_lg__60078.1727787913.500.750.jpg?v=1785188921"},{"product_id":"sierra-18-8072-fuel-connector-3-8-in-replaces-omc-176445-775641-evinrude-johnson-outboard-fuel-line-fitting","title":"Sierra Fuel Elbow 18-8072, Replaces 174177, 3\/8 Inch Hose Barb x 3\/8 Inch NPT Thread for Ford V8 Small Block","description":"\u003cp\u003eThe Sierra 18-8072 is a fuel elbow fitting built to connect fuel line to a 3\/8 inch NPT threaded port. One end of the elbow is a 3\/8 inch hose barb for securing standard fuel hose, while the other end features 3\/8 inch NPT threads for direct connection into a threaded fuel fitting or fuel pump port. This part is designated for Ford V8 small block engine applications, making it a straightforward replacement for boat owners and marine technicians servicing fuel delivery systems on these engines.\u003c\/p\u003e\u003cp\u003eThe elbow ships with matching gasket 18-0147 included, so the sealing surface is ready to install without sourcing a separate gasket. It is packaged 10 units per package, making it a practical option for shops and technicians who service multiple engines or keep spare fittings on hand. Sierra 18-8072 is a direct replacement for OEM part number 174177, allowing for a like-for-like swap when the original fitting has failed, corroded, or cracked.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8072\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Barb Size:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/8 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket Included:\u003c\/strong\u003e Yes, gasket 18-0147\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Ford V8 small block\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 10 per package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282260057\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord V8 small block\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e174177\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-8072 fuel elbow fit?\u003c\/strong\u003e The Sierra 18-8072 fuel elbow is designated for Ford V8 small block engine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does 18-8072 replace?\u003c\/strong\u003e Sierra 18-8072 replaces OEM part number 174177, so it can be used as a direct swap for that original fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fuel elbow come with a gasket?\u003c\/strong\u003e Yes, the 18-8072 fuel elbow includes gasket 18-0147, so a matching gasket does not need to be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose fits the barb end of 18-8072?\u003c\/strong\u003e The barb end of the Sierra 18-8072 fuel elbow is sized for 3\/8 inch fuel hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size is on the other end of the fitting?\u003c\/strong\u003e The opposite end of the 18-8072 elbow has 3\/8 inch NPT threads for connection into a threaded fuel port or fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fuel elbows come in one package?\u003c\/strong\u003e Sierra 18-8072 is packaged 10 units per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-8072 fuel elbow weigh?\u003c\/strong\u003e Each Sierra 18-8072 fuel elbow weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 18-8072 a genuine Sierra part?\u003c\/strong\u003e Yes, 18-8072 is a genuine Sierra fuel elbow, identified by Sierra's own part number 18-8072.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan 18-8072 be used on engines other than Ford V8 small block?\u003c\/strong\u003e The listed fitment for Sierra 18-8072 is Ford V8 small block; no other engine applications are specified for this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 18-8072 fuel elbow?\u003c\/strong\u003e The package includes the Sierra 18-8072 fuel elbow fitting along with gasket 18-0147.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432892123,"sku":"SIE-18-8072","price":9.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8072_lg__59967.1690807801.500.750.jpg?v=1785329161"},{"product_id":"sierra-18-8078-fuel-tank-connector-male-1-4in-npt-large-inlet-for-nissan-tohatsu-outboards-replaces-suzuki-65740-95500","title":"Sierra Tank Connector 18-8078, 1\/4 Inch NPT Male, Replaces 65740-95500, 99105-00193","description":"\u003cp\u003eThe Sierra 18-8078 Tank Connector is a 1\/4 inch NPT male fitting with a.508 inch outer diameter, designed to attach at the fuel tank end of a portable outboard fuel line assembly. It threads into the tank fitting and mates with the Sierra 18-8079 quick-connect fuel connector to complete the tank-to-engine fuel line connection. The male connector body allows fuel to flow from the tank through the line to the engine, and it is built to the same dimensional standard as the original equipment tank fitting it replaces, so it installs and seals the same way as the OEM part. This connector fits all models within its application and is a direct cross-reference for the OEM part numbers listed below, making it a straightforward replacement when a tank connector has cracked, worn out, or is missing from a fuel line kit. Because it mates specifically with the 18-8079 fuel connector (a separate part), buyers assembling or repairing a complete fuel line should confirm they have the correct mating half for their setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8078\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Tank Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/4 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter:\u003c\/strong\u003e 0.508 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMates With:\u003c\/strong\u003e Sierra 18-8079\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 65740-95500, 99105-00193\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits all models.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003e65740-95500, 99105-00193\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-8078 tank connector used for?\u003c\/strong\u003e It is the male 1\/4 inch NPT fitting installed at the fuel tank end of a portable outboard fuel line, and it mates with the Sierra 18-8079 fuel connector to complete the tank-to-engine connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-8078 replace OEM tank connectors?\u003c\/strong\u003e Yes, this connector cross-references directly to OEM part numbers 65740-95500 and 99105-00193.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size is the 18-8078 tank connector?\u003c\/strong\u003e It has a 1\/4 inch NPT thread with a.508 inch outer diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8078 a male or female fitting?\u003c\/strong\u003e The 18-8078 is a male connector; it mates with the female Sierra 18-8079 fuel connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat models does the Sierra 18-8078 tank connector fit?\u003c\/strong\u003e The 18-8078 fits all models within its application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 18-8078 tank connector mate with?\u003c\/strong\u003e It mates with the Sierra 18-8079 quick-connect fuel connector; the two parts together form a complete tank-side fuel line connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-8078 tank connector weigh?\u003c\/strong\u003e The 18-8078 weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-8078 connector?\u003c\/strong\u003e It is white with a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to also buy part 18-8079?\u003c\/strong\u003e If your fuel line assembly needs both halves of the connection, yes; 18-8079 is a separate part number that mates with the 18-8078 and must be ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8078 genuine Sierra or aftermarket?\u003c\/strong\u003e It is a genuine Sierra part, sold under Sierra part number 18-8078, and cross-references to OEM numbers 65740-95500 and 99105-00193.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-8078?\u003c\/strong\u003e You receive one Sierra 18-8078 male tank connector fitting; the mating 18-8079 fuel connector is sold separately.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432957659,"sku":"SIE-18-8078","price":12.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8078_lg__72242.1558131550.500.750.jpg?v=1785188484"},{"product_id":"sierra-18-80410-1-female-fuel-connector-5-16-in-fuel-line-fitting-for-mercury-75-125-hp-3-cyl-4-cyl-and-65-80-jet-outboards","title":"Sierra 18-80410-1 Female Fuel Connector, 3\/8 Inch NPT, Replaces Mercury 22-13563T3, Nissan\/Tohatsu 394-70250-0","description":"\u003cp\u003eThe Sierra 18-80410-1 is a female fuel line connector sized at 3\/8 inch with a 0.375 inch NPT thread. It is used to join the fuel line from the tank to the engine's fuel inlet, providing a secure, leak-resistant connection point in the fuel delivery system. The connector features a machined exterior finish and is finished in white\/black.\u003c\/p\u003e\u003cp\u003eThis connector is designed to fit Mercury 4\/5 hp 2-stroke outboards (1999 \u0026amp; up) and Nissan 4hp-30hp 4-stroke outboards, and cross-references to Mercury Marine and Nissan\/Tohatsu OEM part numbers. It ships as a single connector piece and is backed by a 1 year manufacturer warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-80410-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Female Fuel Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 0.375 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\/Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Other\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282373337\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Warranty:\u003c\/strong\u003e 1 year\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury 4\/5 hp 2-stroke (1999 \u0026amp; up)\u003c\/li\u003e\n\u003cli\u003eNissan 4hp-30hp 4-stroke\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e394-70250-0 (Nissan\/Tohatsu)\u003c\/li\u003e\n\u003cli\u003e22-13563T3 (Mercury Marine)\u003c\/li\u003e\n\u003cli\u003e22-13563BK3 (Mercury Marine)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sierra 18-80410-1 fuel connector?\u003c\/strong\u003e The Sierra 18-80410-1 is a 3\/8 inch fuel connector with a 0.375 inch NPT thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-80410-1 a male or female connector?\u003c\/strong\u003e It is a female fuel connector, designed to mate with the corresponding male fitting on the fuel line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the Sierra 18-80410-1 cross-reference?\u003c\/strong\u003e It cross-references to Nissan\/Tohatsu outboard number 394-70250-0 and Mercury Marine numbers 22-13563T3 and 22-13563BK3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outboard engines does this fuel connector fit?\u003c\/strong\u003e The 18-80410-1 fits Mercury 4\/5 hp 2-stroke outboards (1999 \u0026amp; up) and Nissan 4hp-30hp 4-stroke outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-80410-1 fuel connector made of?\u003c\/strong\u003e The connector body has a machined exterior finish; the manufacturer lists the material category as Other rather than a specific metal or plastic name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this fuel connector?\u003c\/strong\u003e The Sierra 18-80410-1 is finished in white\/black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-80410-1?\u003c\/strong\u003e The connector measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-80410-1 weigh?\u003c\/strong\u003e This fuel connector weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-80410-1 come with a warranty?\u003c\/strong\u003e Yes, the Sierra 18-80410-1 fuel connector is backed by a 1 year manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in the package?\u003c\/strong\u003e The Sierra 18-80410-1 ships as a single fuel connector piece.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988433055963,"sku":"SIE-18-80410-1","price":8.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-80410-1__24678.1737867787.500.750.jpg?v=1785189014"},{"product_id":"sierra-18-8115-fuel-line-hose-3-8-x-25-fuel-pump-to-carburetor-connection-mercruiser-carbureted-engines-ptfe-composite-sae-j1527-a1","title":"Sierra 18-8115 Fuel Line Hose, 3\/8 Inch x 25 Inch PTFE Composite, Fuel Pump to Carburetor Connection","description":"\u003cp\u003eThe Sierra 18-8115 Fuel Line Hose is a PTFE composite fuel line built for the fuel pump to carburetor connection on carbureted marine engines. It replaces the copper or steel tubing originally used in this run, giving you a flexible, corrosion-resistant alternative that is easier to route and install between the pump and carburetor.\u003c\/p\u003e\u003cp\u003eThe hose measures 3\/8 inch by 25 inches and is fitted with a 5\/8\"-18 male inverted flare straight fitting on one end and a 5\/8\"-18 90 degree fitting on the opposite end, matching the original fitting orientation so the line drops into place without additional bending or fabrication. The PTFE composite construction is built to meet SAE J1527 Type A1 certification, the standard for fuel-resistant, fire-safe marine fuel hose. The white-finish hose has a nominal wall thickness of 1 millimeter and an outside diameter of 9.5 millimeters.\u003c\/p\u003e\u003cp\u003eAs a Sierra part, the 18-8115 is engineered to meet or exceed the original equipment part it replaces and is backed by Sierra's Customer Satisfaction Warranty against defects in workmanship and materials for the useful life of the product.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8115\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Fuel Line Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Fuel pump to carburetor connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PTFE composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Diameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 9.5 millimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Wall Thickness:\u003c\/strong\u003e 1 millimeter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Fitting 1:\u003c\/strong\u003e 5\/8\"-18 male inverted flare, straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Fitting 2:\u003c\/strong\u003e 5\/8\"-18 male inverted flare, 90 degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e SAE J1527 Type A1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.48 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFor fuel pump to carburetor connections on carbureted marine engines.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eReplaces copper or steel tubing originally used in this connection.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-8115 fuel line hose connect?\u003c\/strong\u003e It runs the fuel line from the fuel pump to the carburetor on a carbureted marine engine, replacing the original copper or steel tubing in that connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the 18-8115 hose?\u003c\/strong\u003e The hose is 3\/8 inch in diameter and 25 inches long, with an outside diameter of 9.5 millimeters and a nominal wall thickness of 1 millimeter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fittings are on each end of the hose?\u003c\/strong\u003e One end has a 5\/8\"-18 male inverted flare fitting in a straight configuration, and the opposite end has a 5\/8\"-18 male inverted flare fitting bent at 90 degrees.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-8115 made from?\u003c\/strong\u003e It is made from PTFE composite hose material, built to meet SAE J1527 Type A1 certification for marine fuel line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hose replace metal fuel tubing?\u003c\/strong\u003e Yes, the 18-8115 is designed to replace copper or steel tubing used in the fuel pump to carburetor connection, offering a flexible alternative with the same fitting configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8115 fuel line certified for marine fuel systems?\u003c\/strong\u003e Yes, it meets SAE J1527 Type A1 certification, the standard for fuel-resistant, fire-safe hose used in marine fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-8115 fuel line hose weigh?\u003c\/strong\u003e The hose weighs 0.48 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-8115 hose?\u003c\/strong\u003e The hose has a white finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-8115 come with both fittings already installed?\u003c\/strong\u003e Yes, the hose ships as a complete assembly with the 5\/8\"-18 straight fitting on one end and the 5\/8\"-18 90 degree fitting on the other, ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8115 an OEM or aftermarket part?\u003c\/strong\u003e It is a Sierra aftermarket fuel line hose engineered to meet or exceed the original equipment part it replaces, backed by Sierra's Customer Satisfaction Warranty.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988433088731,"sku":"SIE-18-8115","price":64.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8115_lg__31688.1558132931.500.750.jpg?v=1785189045"},{"product_id":"sierra-18-8092-3-8-fuel-connector-for-johnson-evinrude-omc-brp-outboards-replaces-omc-176445-775641","title":"Sierra 18-8092 3\/8 Inch Fuel Connector, Replaces 176445 775641, for Johnson\/Evinrude OMC\/BRP Outboards","description":"\u003cp\u003eThe Sierra 18-8092 is a 3\/8 inch (9.5mm) fuel connector designed to join the fuel hose to the fuel tank line on Johnson\/Evinrude (OMC\/BRP) outboard motors. It is the engine-side half of a quick-connect fuel system, mating with a hose barb (sold separately) on one end and a quick-connect fitting on the other, allowing the fuel line to be disconnected from the tank connector without tools. The connector body is molded from durable plastic engineered to withstand continuous exposure to gasoline and the marine environment.\u003c\/p\u003e\u003cp\u003eThis fuel connector uses a threaded inlet connection and a quick-connect outlet connection, and it mates directly with the Sierra 18-6063 tank connector to complete a compatible fuel line assembly. It is a universal-fit replacement part, built to meet or exceed the specifications of the original equipment part it replaces. The 18-8092 is sold individually and packaged for retail display.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8092\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Size:\u003c\/strong\u003e 3\/8 inch (9.5mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type:\u003c\/strong\u003e Quick Connect Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Connection Type:\u003c\/strong\u003e Quick Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Connection Type:\u003c\/strong\u003e Threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMates With:\u003c\/strong\u003e Sierra Tank Connector 18-6063\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Engine Type:\u003c\/strong\u003e Johnson\/Evinrude (OMC\/BRP) outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3 x 1.5 x 1.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282368869\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eJohnson\/Evinrude (OMC\/BRP) outboards using a 3\/8 inch quick-connect fuel connector\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJohnson\/Evinrude Outboard 176445\u003c\/li\u003e\n\u003cli\u003eJohnson\/Evinrude Outboard 775641\u003c\/li\u003e\n\u003cli\u003eMoeller 33480\u003c\/li\u003e\n\u003cli\u003eMoeller 33480-10\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-8092 fuel connector fit?\u003c\/strong\u003e The Sierra 18-8092 is a 3\/8 inch fuel connector built for Johnson\/Evinrude (OMC\/BRP) outboard motors and is a universal-fit replacement part for the engine-side fuel line connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-8092 replace?\u003c\/strong\u003e The 18-8092 replaces Johnson\/Evinrude outboard fuel connectors 176445 and 775641, as well as Moeller 33480 and 33480-10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fuel line does the 18-8092 use?\u003c\/strong\u003e It is sized for 3\/8 inch (9.5mm) fuel hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8092 a genuine Sierra part or a generic aftermarket copy?\u003c\/strong\u003e It is a genuine Sierra-branded fuel connector, engineered to meet or exceed the specifications of the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 18-8092 made of?\u003c\/strong\u003e The connector body is molded plastic, selected to hold up to continuous exposure to gasoline and marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-8092 come with the mating tank connector?\u003c\/strong\u003e No. The 18-8092 mates with the Sierra 18-6063 tank connector, which is sold as a separate part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-8092 include a hose barb?\u003c\/strong\u003e No, the hose barb used with the 18-8092 fuel line assembly is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connection type does the 18-8092 use?\u003c\/strong\u003e The 18-8092 has a threaded inlet connection and a quick-connect outlet connection, letting the fuel line be disconnected from the tank connector without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-8092 weigh?\u003c\/strong\u003e This fuel connector weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-8092 fuel connector?\u003c\/strong\u003e The 18-8092 measures 3 x 1.5 x 1.3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-8092 work on any outboard, or only Johnson\/Evinrude?\u003c\/strong\u003e It is designed for Johnson\/Evinrude (OMC\/BRP) outboards and is listed as a universal-fit replacement connector for that fuel connection style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8092 sold individually?\u003c\/strong\u003e Yes, the 18-8092 is packaged and sold as a single fuel connector.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988433121499,"sku":"SIE-18-8092","price":7.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-8092__39704.1739458868.500.750.jpg?v=1785188024"},{"product_id":"sierra-18-8112-90-degree-hose-fitting-1-npt-x-1-1-4-hose-barb-replaces-oem-97296-97854-marine-engine-cooling","title":"Sierra 18-8112 90 Degree Hose Fitting, 1 inch NPT x 1 1\/4 inch, Crusader Inboard Cooling System, Replaces 97296 97854","description":"\u003cp\u003eThe Sierra 18-8112 is a 90 degree hose fitting engineered for the cooling system on Crusader inboard marine engines. Its angled body routes cooling water hose runs through tight engine compartment spaces without kinking, making it a common replacement when an original fitting has corroded or cracked. The fitting is threaded 1 inch NPT x 1 1\/4 inch, allowing it to connect directly into the cooling system passages it is designed for while accepting the mating hose size on the other end.\u003c\/p\u003e\u003cp\u003eThis is a direct-fit replacement part identified by Sierra part number 18-8112, and it corresponds to the OEM cross-reference numbers 97296 and 97854, so it can be ordered using either the Sierra number or those original equipment numbers. It is intended for use as part of the broader Crusader inboard cooling system lineup, alongside related manifold, riser, and gasket components in that same system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hose Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Angle:\u003c\/strong\u003e 90 degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1 inch NPT x 1 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Crusader inboard cooling system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 97296, 97854\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282126803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eCrusader inboard engine cooling system\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e97296\u003c\/li\u003e\n\u003cli\u003e97854\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-8112 hose fitting used for?\u003c\/strong\u003e It is a 90 degree hose fitting used in the cooling system of Crusader inboard marine engines, routing cooling water hose around tight spaces in the engine compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle is the 18-8112 fitting?\u003c\/strong\u003e The Sierra 18-8112 is a 90 degree fitting, allowing a hose run to change direction by a right angle rather than requiring a straight connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does the 18-8112 fitting have?\u003c\/strong\u003e It is threaded 1 inch NPT x 1 1\/4 inch, matching the cooling system passage and hose connection it is designed for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-8112 replace any OEM part numbers?\u003c\/strong\u003e Yes, Sierra 18-8112 replaces OEM numbers 97296 and 97854, so it can be cross-referenced and ordered against either of those original part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill 18-8112 fit any inboard engine cooling system?\u003c\/strong\u003e Sierra 18-8112 is designed for the Crusader inboard engine cooling system rather than being a universal fitting, so it should be matched against the OEM numbers 97296 or 97854 for confirmation before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-8112 hose fitting weigh?\u003c\/strong\u003e The Sierra 18-8112 hose fitting weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8112 a genuine or aftermarket part?\u003c\/strong\u003e The 18-8112 is sold under the Sierra brand as a replacement part for the Crusader cooling system, cross-referenced to OEM numbers 97296 and 97854 rather than being an OEM-branded component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other components does the 18-8112 fitting work alongside?\u003c\/strong\u003e Within the Crusader inboard cooling system, the 18-8112 fitting is used along with related manifold, riser, spacer, and gasket parts that make up the same cooling circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sierra 18-8112?\u003c\/strong\u003e The 18-8112 is supplied as the single 90 degree, 1 inch NPT x 1 1\/4 inch hose fitting; it does not include the mounting bolts or gasket kits used elsewhere in the cooling system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I identify the 18-8112 fitting by its OEM number instead of the Sierra number?\u003c\/strong\u003e Yes, if you only have the OEM number 97296 or 97854 from your original fitting, that cross-references directly to Sierra part number 18-8112.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988433219803,"sku":"SIE-18-8112","price":57.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8112_lg__76116.1678126821.500.750.jpg?v=1785188095"},{"product_id":"sierra-18-8091-fuel-connector-for-mercury-mariner-outboards-engine-side-fuel-line-fitting","title":"Sierra Fuel Connector 18-8091 for Mercury Mariner and Force Outboard Fuel Line Assemblies","description":"\u003cp\u003eThe Sierra 18-8091 Fuel Connector is a machined fuel line fitting used in quick-connect fuel line assemblies for Mercury, Mariner, and select Force outboard motors. It is built for the connector positions on fuel line assemblies that use double-sealed quick-connect fittings on the tank end and clip-on quick-connect fittings on the engine end, letting boaters disconnect and reconnect fuel lines quickly for storage, winterizing, or engine service without tools.\u003c\/p\u003e\u003cp\u003eConstructed from machined metal with an NPT threaded connection, the 18-8091 connector is sized to work with the fuel line assembly system that also includes the 18-80402 tank connector and 18-8005EP-1 primer bulb, both sold separately as individual components of the same assembly. It is offered as a shop pack of 10 connectors, priced per package, making it a practical option for marine shops and technicians who service multiple outboards and need connectors on hand for repeated repairs.\u003c\/p\u003e\u003cp\u003eThis connector is intended for Force outboards of 40 HP and larger (1993 and newer), Force 9.9\/15\/25 HP outboards (1998), and Mercury Mariner outboards that use clip-on type quick-connect fittings at both the tank and engine ends of the fuel line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8091\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.58 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 10 per package (shop pack, priced per package)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Taiwan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282119850\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eForce outboards, 40 HP and larger, 1993 and newer\u003c\/li\u003e\n\u003cli\u003eForce outboards, 9.9\/15\/25 HP, 1998\u003c\/li\u003e\n\u003cli\u003eMercury Mariner outboards using clip-on type quick-connect fittings at both the tank and engine ends of the fuel line\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards does the Sierra 18-8091 fuel connector fit?\u003c\/strong\u003e The Sierra 18-8091 fuel connector fits Force outboards of 40 HP and larger (1993 and newer), Force 9.9\/15\/25 HP outboards (1998), and Mercury Mariner outboards that use clip-on type quick-connect fittings at both the tank and engine ends of the fuel line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8091 sold as a single connector?\u003c\/strong\u003e No, the Sierra 18-8091 is sold as a shop pack of 10 connectors and is priced per package rather than per individual piece.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 18-8091 connector made of?\u003c\/strong\u003e It is a machined metal fitting with an NPT threaded connection, designed for durable use in outboard fuel line assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does one package of 18-8091 connectors weigh?\u003c\/strong\u003e A package of Sierra 18-8091 fuel connectors weighs 1.58 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-8091 include the tank connector or primer bulb?\u003c\/strong\u003e No, the 18-8091 is the fuel connector fitting only. The matching 18-80402 tank connector and 18-8005EP-1 primer bulb are separate components sold individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of a single 18-8091 connector?\u003c\/strong\u003e Each Sierra 18-8091 connector measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this connector use a clip-on or threaded fitting?\u003c\/strong\u003e The Sierra 18-8091 uses a threaded NPT connection as its fitting type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Sierra 18-8091 connector manufactured?\u003c\/strong\u003e The 18-8091 fuel connector's country of origin is Taiwan.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-8091 be used with Mercury outboards, or only Force models?\u003c\/strong\u003e It fits both: Mercury Mariner outboards using clip-on type quick-connect fittings, as well as qualifying Force outboards (40 HP and larger, 1993 and newer, and 9.9\/15\/25 HP models from 1998).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 18-8091 fuel connector have?\u003c\/strong\u003e The Sierra 18-8091 has a machined exterior finish.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988433252571,"sku":"SIE-18-8091","price":11.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8091_lg__68028.1558132165.500.750.jpg?v=1785188277"},{"product_id":"marine-fuel-line-hose-3-8-x-31-for-mercruiser-carbureted-inline-engines-90-110-120-hp-1963-1978-fuel-pump-to-carburetor-sae-j1527-a1-mpn-18-8114","title":"Sierra 18-8114 Fuel Line Hose, 3\/8 Inch x 31 Inch, Fuel Pump to Carburetor Connection for Mercruiser","description":"\u003cp\u003eThe Sierra 18-8114 is a PTFE composite fuel line hose built to connect the fuel pump to the carburetor on Mercruiser engines. It is designed as a direct replacement for factory copper or steel tubing, giving you a flexible, corrosion-resistant alternative that is easier to route and install than rigid metal line. The hose measures 3\/8 inch (9.5mm) in size and 31 inches long (plus or minus 1\/4 inch), with a wall thickness of 3.2 millimeters for durability under fuel system pressure and vibration.\u003c\/p\u003e\u003cp\u003eEach end is fitted for a secure, leak-resistant connection: one end terminates in a 5\/8\"-18 male inverted flare straight fitting, and the opposite end terminates in a 5\/8\"-18 male inverted flare fitting bent at 90 degrees, matching the factory fuel pump-to-carburetor routing. The hose is built and certified to SAE J1527 Type A1, the marine fuel hose standard covering fire resistance and permeation control for use in engine compartments. As with all Sierra parts, the 18-8114 is backed by Sierra's Industry Leading Customer Satisfaction Warranty, covering defects in workmanship and materials for the useful life of the product.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8114\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type:\u003c\/strong\u003e Fuel pump to carburetor connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Line Hose Size:\u003c\/strong\u003e 3\/8 inch (9.5 millimeters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 31 inches (plus or minus 1\/4 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 0.37 inches (9.5 millimeters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Wall Thickness:\u003c\/strong\u003e 3.2 millimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Fittings:\u003c\/strong\u003e 5\/8\"-18 male inverted flare, straight on one end, 90 degree on the opposite end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PTFE composite hose (replaces copper or steel tubing); copper, PTFE, and steel components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e SAE J1527 Type A1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFuel pump to carburetor connection on Mercruiser engines\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eCopper or steel fuel line tubing (3\/8 inch)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-8114 fuel line hose used for?\u003c\/strong\u003e The Sierra 18-8114 connects the fuel pump to the carburetor, replacing the original copper or steel fuel line tubing with a flexible PTFE composite hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sierra 18-8114 hose?\u003c\/strong\u003e It measures 3\/8 inch (9.5 millimeters) in hose size and 31 inches long, plus or minus 1\/4 inch, with a wall thickness of 3.2 millimeters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat end fittings does the 18-8114 have?\u003c\/strong\u003e One end has a 5\/8\"-18 male inverted flare fitting installed straight, and the opposite end has the same 5\/8\"-18 male inverted flare fitting bent at 90 degrees.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8114 a direct replacement for copper or steel fuel line?\u003c\/strong\u003e Yes, it is designed to replace copper or steel tubing on the fuel pump to carburetor connection with a PTFE composite hose of the same fitting configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines is the 18-8114 fuel line hose used on?\u003c\/strong\u003e This hose is used for the fuel pump to carburetor connection on Mercruiser engines and is otherwise a universal fit fuel line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-8114 hose made from?\u003c\/strong\u003e The 18-8114 is a PTFE composite hose, with copper and steel used in its fitting components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-8114 meet any industry standards?\u003c\/strong\u003e Yes, the 18-8114 is built to SAE J1527 Type A1, the marine standard covering fuel hose fire resistance and permeation performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Sierra 18-8114 and 18-8115 fuel line hoses?\u003c\/strong\u003e Both are PTFE composite hoses with the same 5\/8\"-18 fittings for fuel pump to carburetor connection, but the 18-8114 is 31 inches long while the 18-8115 is 25 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-8114 fuel line hose weigh?\u003c\/strong\u003e The Sierra 18-8114 weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8114 genuine Sierra or aftermarket?\u003c\/strong\u003e The 18-8114 is a genuine Sierra part, backed by Sierra's Industry Leading Customer Satisfaction Warranty covering defects in workmanship and materials for the useful life of the product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-8114 hose?\u003c\/strong\u003e The Sierra 18-8114 fuel line hose is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Sierra 18-8114 replace rigid metal fuel tubing?\u003c\/strong\u003e Yes, the 18-8114 PTFE composite hose is designed to replace copper or steel tubing while keeping the same 5\/8\"-18 inverted flare fitting connections.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988433318107,"sku":"SIE-18-8114","price":74.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sie-18-8114_large__13891.1558171499.500.750.jpg?v=1785189157"},{"product_id":"sierra-18-8089-fuel-connector-engine-end-for-tohatsu-nissan-5-90hp-2-stroke-tldi-outboards-replaces-oem-3b2-70250-1m-3-8in-hose-barb","title":"Sierra 18-8089 Fuel Connector (Engine End) - Replaces 3B2-70260-O, Fits 5-90HP 2-Stroke \u0026 TLDI Outboards","description":"\u003cp\u003eThe Sierra 18-8089 is an engine-end fuel connector designed to join the fuel line to the engine on compatible outboard motors. It features metric threads and is sized for 5\/16 inch fuel hose, providing a secure connection point in the fuel delivery system. This connector mates with the Sierra 18-8088 fitting to complete the engine-side fuel line connection, and it is packaged 10 to a package for shops and technicians who need to keep several on hand for service and repair work.\u003c\/p\u003e\u003cp\u003eThis part directly replaces OEM number 3B2-70260-O and fits 5-90HP 2-stroke and TLDI outboard models. Because it uses metric threads, it is built to the specification of the outboards it is designed for rather than a generic imperial fitting, so installers should confirm thread compatibility before use. The connector is finished in white and is compact in size, making it a straightforward, purpose-built replacement part for maintaining proper fuel flow at the engine connection point.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8089\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Fuel Connector (Engine End)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces (OEM):\u003c\/strong\u003e 3B2-70260-O\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e Metric Threads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 5-90HP 2-stroke and TLDI outboard models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMates With:\u003c\/strong\u003e Sierra 18-8088\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 10 per package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5.94 inches L x 1.13 inches H x 1.25 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282368715\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e5-90HP 2-stroke and TLDI outboard models\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e3B2-70260-O\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-8089 fuel connector fit?\u003c\/strong\u003e The Sierra 18-8089 fits 5-90HP 2-stroke and TLDI outboard models, connecting the fuel line at the engine end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does the 18-8089 replace?\u003c\/strong\u003e It replaces OEM number 3B2-70260-O, making the Sierra 18-8089 a direct equivalent for that connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does this connector use?\u003c\/strong\u003e A 5\/16 inch fuel hose is used with the Sierra 18-8089 engine-end connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-8089 use standard or metric threads?\u003c\/strong\u003e The Sierra 18-8089 has metric threads, so it is designed to match outboards specified with metric fittings rather than imperial threads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 18-8089 and the 18-8088?\u003c\/strong\u003e The 18-8089 is the engine-end fuel connector and is designed to mate with the Sierra 18-8088, which is the corresponding fitting on the other end of the connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many connectors come in a package?\u003c\/strong\u003e The Sierra 18-8089 is sold in a package of 10, which suits shops and technicians servicing multiple units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-8089 weigh?\u003c\/strong\u003e Each Sierra 18-8089 fuel connector weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-8089 fuel connector?\u003c\/strong\u003e This fuel connector is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Sierra 18-8089 manufactured?\u003c\/strong\u003e The country of origin for the Sierra 18-8089 fuel connector is China.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8089 a genuine Sierra part or a generic aftermarket copy?\u003c\/strong\u003e The 18-8089 is manufactured and sold under the Sierra brand as a direct OEM-equivalent replacement for part 3B2-70260-O, not a generic unbranded part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the 18-8089?\u003c\/strong\u003e The package measures 5.94 inches long, 1.13 inches high, and 1.25 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-8089?\u003c\/strong\u003e The UPC for the Sierra 18-8089 fuel connector is 808282368715.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988433416411,"sku":"SIE-18-8089","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8089_lg__92029.1558132047.500.750.jpg?v=1785188980"},{"product_id":"sierra-18-9146-9-oetiker-clamp-19-8mm-25-32-in-yamaha-yb-6aw04-3-outboard-fuel-system-bag-of-10","title":"Sierra 18-9146-9 Oetiker Clamp, 19.8mm ID, Bag of 10, Yamaha Outboard Fuel System","description":"\u003cp\u003eThe Sierra 18-9146-9 is a 19.8mm (25\/32 inch) nominal ID Oetiker-style pinch clamp, sold in a bag of 10. Oetiker clamps use a stepless, one-piece steel band that is crimped in place with a special pincer tool, giving a smooth, low-profile band with no protruding screw housing -- a common choice for securing fuel and coolant hose connections on marine engines where a compact, vibration-resistant seal is needed. This part is used in Yamaha outboard fuel system applications. Each bag contains 10 clamps of the same 19.8mm size, and clamps are also available individually rather than only as a full bag. Sierra manufactures this part to meet or exceed the specification of the original equipment it replaces, and Sierra supplies OEM engine manufacturers and boat builders with parts on an ongoing basis. Because Oetiker clamps are sized to a specific nominal ID, it is important to confirm the 19.8mm (25\/32 inch) diameter matches the hose being clamped before ordering -- Sierra also offers this same clamp style in other nominal ID sizes such as 15.7mm (5\/8 inch) under a different part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-9146-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Oetiker-style pinch clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Inside Diameter:\u003c\/strong\u003e 25\/32 inch (19.8 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Bag of 10, also available individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Yamaha Outboard Fuel System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross Reference Numbers:\u003c\/strong\u003e YB-6AW04-3, 16702498\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUsed in Yamaha outboard fuel system applications.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYB-6AW04-3\u003c\/li\u003e\n\u003cli\u003e16702498\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Sierra 18-9146-9 clamp fit?\u003c\/strong\u003e The Sierra 18-9146-9 has a nominal inside diameter of 25\/32 inch, which is 19.8mm, so it is sized for hose in that range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many clamps come in one package?\u003c\/strong\u003e Each package of the 18-9146-9 contains 10 Oetiker-style clamps, sold as a bag of 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy the 18-9146-9 clamps individually instead of a full bag of 10?\u003c\/strong\u003e Yes, while the standard package is a bag of 10, the Sierra 18-9146-9 clamp is also available individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tool do I need to install this clamp?\u003c\/strong\u003e Oetiker clamps like the Sierra 18-9146-9 require a dedicated Oetiker pincer tool to crimp the stepless steel band closed around the hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-9146-9 an OEM equivalent part?\u003c\/strong\u003e Sierra manufactures the 18-9146-9 to meet or exceed the original equipment part it replaces, and it corresponds to OEM reference numbers YB-6AW04-3 and 16702498.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat application is the 18-9146-9 clamp used for?\u003c\/strong\u003e The Sierra 18-9146-9 Oetiker clamp is used in Yamaha outboard fuel system applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this clamp and the Sierra 18-9133-9?\u003c\/strong\u003e The 18-9146-9 has a 25\/32 inch (19.8mm) nominal ID, while the 18-9133-9 is the same Oetiker-style clamp in a smaller 5\/8 inch (15.7mm) nominal ID -- they are different SKUs for different hose sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre Oetiker clamps reusable once removed?\u003c\/strong\u003e Oetiker-style clamps such as the 18-9146-9 are a one-piece stepless band that is crimped shut, so they are designed for single use and must be cut off and replaced with a new clamp once removed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a bag of Sierra 18-9146-9 clamps weigh?\u003c\/strong\u003e A package of the Sierra 18-9146-9 clamps weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use an Oetiker clamp instead of a standard worm-gear hose clamp?\u003c\/strong\u003e The Sierra 18-9146-9 Oetiker clamp uses a smooth, low-profile crimped steel band with no protruding screw housing, giving a more compact fit in tight engine compartments compared to a worm-gear clamp.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988436365531,"sku":"SIE-18-9146-9","price":13.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-9146-9__99509.1737894951.500.750.jpg?v=1785188010"},{"product_id":"sierra-18-8958-fuel-system-fitting-for-mercury-mariner-outboards-replaces-22-424254-pack-of-2","title":"Sierra 18-8958 Fuel System Fitting, Replaces Mercury 22-424254, Package of 2 for Mercury\/Mariner Outboards","description":"\u003cp\u003eThe Sierra 18-8958 is a fuel system fitting engineered for Mercury and Mariner outboard fuel systems. Sold as a package of 2, it is built to restore proper fuel line connection and sealing at the fitting point it replaces, using Sierra's standard of meeting or exceeding the original equipment part's performance. This fitting is a direct replacement for OEM part 22-424254, making it a straightforward swap when the original fitting has worn, cracked, or is leaking fuel.\u003c\/p\u003e\u003cp\u003eFuel system fittings like this one connect fuel lines to carburetors, fuel pumps, or other fuel system components on outboard engines, and a compromised fitting can lead to fuel leaks or poor engine performance. The 18-8958 is finished in white and sized at approximately 4 x 4 x 0.5 inches. Because Sierra parts are built as equivalents to the original Mercury\/Mariner equipment, this fitting installs in place of the original 22-424254 fitting without modification. As with any fuel system component, confirm the fitting matches your specific outboard's fuel system configuration before installing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8958\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2 fittings per package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4 x 4 x 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282361938\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Engine Fuel System Parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury\/Mariner outboard fuel systems\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e22-424254\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-8958 fitting replace?\u003c\/strong\u003e The Sierra 18-8958 is a direct replacement for Mercury OEM part 22-424254, used in Mercury and Mariner outboard fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fittings come in a package?\u003c\/strong\u003e The 18-8958 is sold as a package of 2 fittings, so you receive two fuel system fittings per order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outboard engines is this fitting designed for?\u003c\/strong\u003e This fitting is designed for Mercury and Mariner outboard fuel systems as a replacement fuel fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-8958 fitting?\u003c\/strong\u003e It is white in color, matching the original Mercury\/Mariner fitting appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the fitting?\u003c\/strong\u003e Each Sierra 18-8958 fitting measures approximately 4 x 4 x 0.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-8958 package weigh?\u003c\/strong\u003e The package of Sierra 18-8958 fittings weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8958 an OEM part or aftermarket?\u003c\/strong\u003e It is a Sierra aftermarket part manufactured to meet or exceed the performance of the original Mercury equipment fitting, part number 22-424254.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fitting work with any fuel line size?\u003c\/strong\u003e A specific fuel line diameter is not listed for the Sierra 18-8958, so confirm compatibility with your fuel system's fittings before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fitting be used on Mercury Marine, Mercury Race, or Mercury Sport Jet outboards?\u003c\/strong\u003e Yes, the Sierra 18-8958 fitting is interchangeable with Mercury Marine, Mercury Race Outboard, and Mercury Sport Jet applications that use OEM fitting 22-424254.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-8958?\u003c\/strong\u003e You receive a package of 2 fuel system fittings, part number Sierra 18-8958.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988437283035,"sku":"SIE-18-8958","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-8958__10486.1722494410.500.750.jpg?v=1785188010"},{"product_id":"attwood-8838us6-universal-sprayless-fuel-line-connector-1-4-npt-x-3-8-and-5-16-fits-all-standard-marine-fuel-systems","title":"Attwood 8838US6 Universal Sprayless Fuel Connector for 3\/8 Inch and 5\/16 Inch Fuel Line","description":"\u003cp\u003eThe Attwood 8838US6 Universal Sprayless Connector is a male and female fuel fitting set designed to replace traditional threaded tank fittings on outboard and I\/O fuel systems. Its Universal Sprayless Connector design eliminates the spray of fuel that typically occurs when connecting or disconnecting fuel lines, making fuel line service cleaner and safer. The high-strength plastic body is engineered to withstand the harsh marine environment, resisting the effects of sun, moisture, and fuel exposure over time.\u003c\/p\u003e\u003cp\u003eBoth the female hose fitting and male hose fitting are compatible with 3\/8 inch and 5\/16 inch fuel lines, giving it broad compatibility across common boat fuel hose sizes. The male tank fitting comes with pre-applied fuel-grade thread sealant and fits all standard 1\/4 inch NPT fittings, so it threads directly into existing tank ports without a separate sealant application. Both the male and female connectors include automatic check valves that close on disconnect, preventing fuel from leaking out when the line is uncoupled. The fitting is rated for high fuel flow, with less than 0.25 kPa of restriction at 50 liters per hour, and is compatible with ethanol-blended fuels as well as all OEM brand engines.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8838US6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Quick Connect, Universal Sprayless Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/4 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Compatibility:\u003c\/strong\u003e 3\/8 inch and 5\/16 inch fuel line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2 x 2 x 6.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1375 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Flow Restriction:\u003c\/strong\u003e Less than 0.25 kPa at 50 liters per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697883865\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eCompatible with ethanol-blended fuels and all OEM brand engines using 3\/8 inch or 5\/16 inch fuel line and 1\/4 inch NPT tank fittings.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Attwood 8838US6 fitting do?\u003c\/strong\u003e The Attwood 8838US6 is a Universal Sprayless Connector that replaces traditional tank fittings and eliminates fuel spray when connecting or disconnecting the fuel line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fuel line does the 8838US6 fit?\u003c\/strong\u003e Both the male and female hose fittings on the 8838US6 are compatible with 3\/8 inch and 5\/16 inch fuel lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size is the tank fitting?\u003c\/strong\u003e The male tank fitting on the 8838US6 fits all standard 1\/4 inch NPT fittings and comes with pre-applied fuel-grade thread sealant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to add thread sealant separately?\u003c\/strong\u003e No, the 8838US6 male tank fitting has fuel-grade thread sealant pre-applied to prevent fuel leaks at installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this connector leak fuel when disconnected?\u003c\/strong\u003e No, the male and female connectors on the 8838US6 include automatic check valves that close upon disconnecting to prevent leaks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 8838US6 compatible with ethanol fuel?\u003c\/strong\u003e Yes, the Attwood 8838US6 is compatible with ethanol-blended fuels and all OEM brand engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the connector made of?\u003c\/strong\u003e The Attwood 8838US6 has a high-strength plastic body engineered to withstand the marine environment, with a black machined finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 8838US6 weigh?\u003c\/strong\u003e The Attwood 8838US6 connector weighs 0.1375 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 8838US6?\u003c\/strong\u003e The Attwood 8838US6 measures 2 x 2 x 6.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fitting restrict fuel flow to my engine?\u003c\/strong\u003e The 8838US6 is rated for high fuel flow, with less than 0.25 kPa of restriction at 50 liters per hour.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces are included with the 8838US6?\u003c\/strong\u003e The 8838US6 is sold as a single Universal Sprayless Connector unit with thread sealant included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 8838US6?\u003c\/strong\u003e The UPC for the Attwood 8838US6 Universal Sprayless Connector is 022697883865.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989674963163,"sku":"ATT-8838US6","price":25.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ATT-8838US6-Universal-Connector-1__02821.1739477319.500.750.jpg?v=1785188437"},{"product_id":"attwood-9300fdv7-in-line-fuel-demand-valve-replaces-8m0044687-fits-3-8-in-and-5-16-in-marine-fuel-hose","title":"Attwood 9300FDV7 In-Line Fuel Demand Valve, Fits 3\/8 and 5\/16 Inch Marine Fuel Hose","description":"\u003cp\u003eThe Attwood 9300FDV7 In-Line Fuel Demand Valve is an EPA certified portable fuel component that installs between the fuel tank and the primer bulb on portable and permanently mounted marine fuel systems. It is built from high-strength composite material designed to hold up in harsh marine environments, and it is compatible with ethanol blended fuels as well as fuel hoses from all original equipment manufacturer brands.\u003c\/p\u003e\u003cp\u003eThe valve's job is to control fuel flow so the engine only draws the amount of fuel it actually needs. It maintains low vacuum restriction for proper engine starting and running performance, and it prevents a pressurized slug of fuel from surging into the engine when the primer bulb is squeezed. This protects against engine flooding and fuel spillage caused by over-pressurized fuel delivery. The valve has a maximum nominal input pressure rating of 20 psi and is protected against pressure spikes up to 40 psi.\u003c\/p\u003e\u003cp\u003eThe 9300FDV7 has two ports and is compatible with both 3\/8 inch and 5\/16 inch fuel hose, making it a versatile fit across common outboard and I\/O portable fuel line setups. It carries a painted composite exterior finish and measures 4.87 x 8.5 x 4.75 inches.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9300FDV7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e In-Line Fuel Demand Valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Painted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4.87 x 8.5 x 4.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1833 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Compatibility:\u003c\/strong\u003e 3\/8 inch and 5\/16 inch fuel hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Ports:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Pressure:\u003c\/strong\u003e 20 psi nominal input, protected for 40 psi pressure spike\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e EPA Certified Portable Fuel Component\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification Met:\u003c\/strong\u003e CSA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697930071\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Warranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal in-line fuel demand valve compatible with 3\/8 inch and 5\/16 inch marine fuel hose and all original equipment manufacturer fuel system brands; no specific engine or boat model fitment is specified.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Attwood 9300FDV7 fuel demand valve do?\u003c\/strong\u003e It regulates fuel flow between the fuel tank and the primer bulb, allowing only the amount of fuel the engine requests and preventing a pressurized slug of fuel from reaching the engine, which helps prevent flooding and fuel spillage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fuel hose does the 9300FDV7 work with?\u003c\/strong\u003e The 9300FDV7 is compatible with both 3\/8 inch and 5\/16 inch marine fuel hose, so it fits either common hose size on a portable fuel line setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this valve compatible with ethanol blended fuels?\u003c\/strong\u003e Yes, the Attwood 9300FDV7 is rated for use with ethanol blended fuels in addition to standard marine gasoline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does the fuel demand valve get installed?\u003c\/strong\u003e The 9300FDV7 installs in-line between the fuel tank and the primer bulb on a portable marine fuel system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum pressure rating of the 9300FDV7?\u003c\/strong\u003e It has a 20 psi maximum nominal input pressure rating and is protected against pressure spikes up to 40 psi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 9300FDV7 made from?\u003c\/strong\u003e The valve body is made from high-strength composite material with a painted exterior finish, engineered to hold up in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 9300FDV7 work with other brands of fuel system components?\u003c\/strong\u003e Yes, the Attwood 9300FDV7 fuel demand valve is compatible with fuel hoses and fittings from all original equipment manufacturer brands, not just Attwood.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many ports does the fuel demand valve have?\u003c\/strong\u003e The 9300FDV7 has two ports, an inlet and an outlet, for connecting the fuel tank side and the primer bulb side of the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 9300FDV7?\u003c\/strong\u003e The Attwood 9300FDV7 measures 4.87 x 8.5 x 4.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 9300FDV7 weigh?\u003c\/strong\u003e The Attwood 9300FDV7 fuel demand valve weighs 0.1833 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Attwood 9300FDV7?\u003c\/strong\u003e The 9300FDV7 is backed by a 90 day manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 9300FDV7 fit a specific boat make or model?\u003c\/strong\u003e No, the 9300FDV7 is a universal in-line fuel demand valve sized for 3\/8 inch and 5\/16 inch fuel hose rather than a make- or model-specific part.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989676404955,"sku":"ATT-9300FDV7","price":38.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-9300fdv7_lg__52265.1558110903.500.750.jpg?v=1785188990"},{"product_id":"attwood-93806-universal-marine-fuel-line-assembly-kit-6-ft-x-3-8-in-with-primer-bulb-and-fuel-demand-valve-no-tank-fittings","title":"Attwood Universal Fuel Line Assembly Kit, 6 Feet x 3\/8 Inch, with Primer Bulb and Fuel Demand Valve","description":"\u003cp\u003eThe Attwood 93806UFDV7 Universal Fuel Line Assembly Kit is a complete low-permeation fuel line system built for boats using portable or built-in fuel tanks with a universal engine connection. The kit is centered on a 6-foot length of 3\/8-inch diameter, fiber reinforced, low-permeation fuel hose engineered to resist kinking and hardening over time, while remaining compatible with ethanol blended fuels. Attwood's multi-layer primer bulb is included, with tough multi-layer construction that resists collapse and ballooning during repeated priming, helping deliver consistent fuel flow to the engine. A fuel demand valve is also included as part of the assembly, supporting reliable fuel delivery on demand. This kit is designed for use with universal brand engines and tanks; it does not include the Male or Female Universal Sprayless Connector (USC) tank fittings, so boaters who need those connectors should plan to source them separately. The low-permeation construction throughout the hose and primer bulb helps reduce fuel vapor emissions and supports compliance-minded fuel system upgrades. This assembly is a practical solution for replacing a worn, cracked, or hardened fuel line and primer bulb as a single matched set rather than sourcing individual components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 93806UFDV7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Universal Fuel Line Assembly Kit without Tank Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 6 feet (72 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Diameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Wall Thickness:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fiber Reinforced Material (low-permeation)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Fuel line, primer bulb, fuel demand valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Fittings:\u003c\/strong\u003e Male and Female Universal Sprayless Connector (USC) fittings not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEthanol Compatible:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Compatibility:\u003c\/strong\u003e Universal engine connection; compatible with all OEM brand engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697938862\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Attwood 93806UFDV7 fuel line kit?\u003c\/strong\u003e The kit includes a 6-foot length of 3\/8-inch fiber reinforced low-permeation fuel hose, a multi-layer primer bulb, and a fuel demand valve. It does not include the Male or Female Universal Sprayless Connector (USC) tank fittings, so those must be purchased separately if needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fuel line kit include the tank fittings?\u003c\/strong\u003e No. The 93806UFDV7 kit does not include the Male or Female Universal Sprayless Connector (USC) hose-to-tank fittings; only the hose, primer bulb, and fuel demand valve are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat diameter and length is the fuel hose?\u003c\/strong\u003e The hose in this Attwood assembly kit is 3\/8 inch in diameter and 6 feet (72 inches) long, with a nominal wall thickness of 3\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fuel line safe to use with ethanol blended fuels?\u003c\/strong\u003e Yes, the Attwood 93806UFDV7 fuel line is compatible with ethanol blended fuels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does this fuel line kit work with?\u003c\/strong\u003e This is a universal engine fuel line assembly, compatible with all OEM brand engines and designed for use with universal brand engines and tanks rather than one specific engine model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the fuel hose made from?\u003c\/strong\u003e The hose is made from fiber reinforced, low-permeation material designed to resist kinking and hardening over the life of the hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the primer bulb resist collapsing?\u003c\/strong\u003e The primer bulb included with the 93806UFDV7 kit has a tough multi-layer construction that resists collapse and ballooning during repeated use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a fuel demand valve included with this kit?\u003c\/strong\u003e Yes, a fuel demand valve is included as part of the Attwood Universal Fuel Line Assembly Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fuel line kit weigh?\u003c\/strong\u003e The Attwood 93806UFDV7 fuel line assembly kit weighs 1.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I replace my boat's fuel line and primer bulb together?\u003c\/strong\u003e Replacing the hose and primer bulb as a matched assembly, like the Attwood 93806UFDV7 kit, ensures both components are low-permeation and sized correctly together, rather than mixing a new hose with an aged bulb or valve.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989676994779,"sku":"ATT-93806UFDV7","price":83.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-93806ufdv7_lg__33326.1558111077.500.750.jpg?v=1785188084"},{"product_id":"moeller-033210-10-straight-brass-bulkhead-fitting-3-8-inch-npt-marine-fuel-tank-fitting","title":"Moeller Brass Bulkhead Fitting, Straight 3\/8 Inch NPT Barb Connector","description":"\u003cp\u003eThis Moeller brass bulkhead fitting is a straight, 3\/8 inch fuel line connector designed to pass fuel line through a bulkhead or tank wall while maintaining a secure, leak-resistant seal. Built from solid brass with a brass exterior finish, the fitting resists corrosion in the marine fuel system environment and holds up to repeated hose connections over time. The barb-style connector end accepts 3\/8 inch fuel hose, while the threaded side uses a 0.375 inch NPT thread for a tight, sealed installation into a bulkhead, tank fitting, or fuel line junction.\u003c\/p\u003e\u003cp\u003eThis fitting is a single-piece component intended for use in boat fuel systems where a fuel line needs to pass through a bulkhead, transom, or tank wall. It is commonly used when running or replacing fuel lines on boats equipped with portable or built-in fuel tanks. The compact, straight design keeps the fuel line routing simple and minimizes strain on the hose at the pass-through point. As a Moeller product, it is built to the same fuel system design and construction standards the brand is known for in marine fuel components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 033210-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Brass Bulkhead Fitting, Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 0.375 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.5 inches x 2 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size fuel line does the Moeller 033210-10 bulkhead fitting fit?\u003c\/strong\u003e It is sized for 3\/8 inch fuel hose on the barb connector end, matching the fitting's 3\/8 inch straight design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fitting straight or angled?\u003c\/strong\u003e The Moeller 033210-10 is a straight bulkhead fitting, not an angled version, so the hose runs directly through the pass-through point without a bend at the fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the fitting made of?\u003c\/strong\u003e Brass, both in construction and exterior finish, which resists corrosion in a marine fuel system environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type and size does this fitting use?\u003c\/strong\u003e The threaded side uses a 0.375 inch NPT thread, allowing it to seal into a tapped bulkhead, tank fitting, or fuel line junction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fittings come in the package?\u003c\/strong\u003e One Moeller 033210-10 brass bulkhead fitting is included per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fitting weigh?\u003c\/strong\u003e 0.14 pounds, making it a lightweight component to add to a fuel line installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the fitting?\u003c\/strong\u003e The 033210-10 measures 5.5 inches by 2 inches by 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this fitting used for?\u003c\/strong\u003e It is used to pass fuel line through a bulkhead, transom, or tank wall in a boat fuel system while maintaining a sealed connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the connector end barbed or threaded for hose attachment?\u003c\/strong\u003e The hose side of the 033210-10 uses a barb connector, designed to grip 3\/8 inch fuel hose securely, typically with a hose clamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Moeller part?\u003c\/strong\u003e Yes, the 033210-10 is a genuine Moeller brass bulkhead fitting, not a generic or third-party equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fitting be used for fuel systems other than boats?\u003c\/strong\u003e It is designed and marketed as a marine fuel system component, specifically for boat fuel line bulkhead pass-throughs.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991087165659,"sku":"MOE-033210-10","price":15.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/033210-10__05550.1722480069.500.750.jpg?v=1785188191"},{"product_id":"moeller-033206-10-brass-fuel-hose-elbow-male-female-3-8-in-npt-fitting","title":"Moeller Brass Elbow Fuel Fitting, 3\/8 in. NPT Male\/Female, 033206-10","description":"\u003cp\u003eThe Moeller 033206-10 is a brass elbow fitting built for boat fuel line installations, connecting fuel line sections or fittings at a 90-degree angle where a straight run will not fit. It has a 3\/8 in. NPT male\/female thread configuration, so one end threads into a female fitting while the other accepts a male-threaded connector, letting it join two dissimilar fittings in a single elbow. The body is solid brass, chosen for its corrosion resistance and durability in a marine fuel system environment where long-term exposure to fuel and moisture is a factor. As an installation accessory, it is intended for fuel systems produced prior to 2011, so it is best suited to boaters maintaining or repairing older fuel line setups rather than the newest EPA-compliant fuel systems. Typical uses include routing fuel line around obstructions in the engine bay, adapting fitting orientation at a fuel tank or fuel-water separator, and general fuel system repair or upgrade work. The compact elbow measures 5.75 x 2.25 x 1.75 inches and weighs 0.1 pounds, making it easy to fit into tight spaces. Moeller backs its fuel system components with the engineering and construction quality the brand is known for in fuel system design.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 033206-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Brass Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/8 in. NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Configuration:\u003c\/strong\u003e Male\/Female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Brown\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.75 x 2.25 x 1.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729332061\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Installation Accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Fuel systems produced prior to 2011\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eIntended for fuel systems produced prior to 2011. This is a universal installation accessory and is not limited to a specific make, model, or engine.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part number.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Moeller 033206-10 used for?\u003c\/strong\u003e The Moeller 033206-10 is a brass elbow fitting used to connect boat fuel line sections or fittings at a 90-degree angle, typically to route fuel line around obstructions or adapt fitting orientation in a fuel system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does the 033206-10 elbow have?\u003c\/strong\u003e It has a 3\/8 in. NPT thread, in a male\/female configuration, so one end accepts a male-threaded fitting and the other end threads into a female fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 033206-10 elbow made of brass?\u003c\/strong\u003e Yes, this Moeller fitting is a solid brass elbow, chosen for corrosion resistance in marine fuel system applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this Moeller brass elbow?\u003c\/strong\u003e The 033206-10 measures 5.75 x 2.25 x 1.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 033206-10 weigh?\u003c\/strong\u003e It weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 033206-10 fit newer fuel systems?\u003c\/strong\u003e This Moeller fitting is intended for fuel systems produced prior to 2011, so it is designed for older fuel line setups rather than the newest fuel system designs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this elbow fit a specific boat make or engine?\u003c\/strong\u003e No, the 033206-10 is a universal fuel line installation accessory and is not limited to a particular boat make, model, or engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there OEM cross-reference numbers for the 033206-10?\u003c\/strong\u003e No OEM replacement or cross-reference numbers are listed for the Moeller 033206-10 brass elbow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 033206-10?\u003c\/strong\u003e You receive one Moeller 033206-10 brass elbow fitting with 3\/8 in. NPT male\/female threads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 033206-10 be used for general fuel system repair?\u003c\/strong\u003e Yes, this brass elbow is commonly used for fuel system repair, upgrades, and rerouting fuel line in the engine bay or near the fuel tank.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991087198427,"sku":"MOE-033206-10","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/TEM-100060_lg__43572.1558115961.500.750.jpg?v=1785188383"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/MOE-034395-10LPA_lg__94162.1558115876.500.750.jpg?v=1785356511","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-engine-parts-systems-fuel-system-fuel-lines-connectors-fittings.oembed?page=2","provider":"Good Vibes Marina","version":"1.0","type":"link"}