{"title":"Fuel Senders \u0026 Fuel Gauges","description":null,"products":[{"product_id":"fuel-sender-gasket-64082-for-marine-fuel-tank-sending-units-teleflex-sierra","title":"Sierra Fuel Sender Gasket, Part Number 64082, Cross-Reference Teleflex TEL64082","description":"\u003cp\u003eThe Sierra 64082 is a fuel sender gasket used to seal the mounting flange of a boat's fuel sending unit against the fuel tank, preventing fuel vapor and liquid leaks at the sender-to-tank interface. This gasket is the replacement seal to install any time a fuel sender is removed for service, testing, or replacement, since the original gasket should not be reused once broken loose from its seat. Sierra 64082 is a direct cross-reference to the Teleflex TEL64082 gasket, so it is the correct replacement part whether the sender assembly it seals is branded Sierra or Teleflex. It is a lightweight component at 0.03 pounds, sized specifically to match the bolt pattern and flange profile of compatible fuel sender assemblies. Keeping a spare of this gasket on hand is useful for routine fuel system maintenance, since a fuel sender is one of the more commonly serviced components on a boat's fuel tank. The part carries UPC 731957408884, which can be used to confirm you are ordering the correct gasket for your fuel sender. Installing the correct gasket, rather than reusing a worn one or substituting an incorrect size, is the primary way to prevent fuel leaks and vapor intrusion at the sender mounting point.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 64082\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957408884\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Sender Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross Reference:\u003c\/strong\u003e Teleflex TEL64082\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits fuel sender assemblies that use the Sierra 64082 or Teleflex TEL64082 gasket.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTEL64082\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 64082 gasket used for?\u003c\/strong\u003e It seals the mounting flange where a fuel sending unit meets the fuel tank, preventing fuel and vapor leaks. The Sierra 64082 gasket should be replaced any time the fuel sender is removed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 64082 gasket cross-reference to any other brand?\u003c\/strong\u003e Yes, the Sierra 64082 gasket is a direct cross-reference to the Teleflex TEL64082 gasket, so either part number identifies the same gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 64082 gasket weigh?\u003c\/strong\u003e It weighs 0.03 pounds, consistent with its thin, single-layer gasket construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the old gasket when reinstalling a fuel sender?\u003c\/strong\u003e A fuel sender gasket like the Sierra 64082 is designed as a one-time seal; once removed, a fresh gasket such as this one should be installed to maintain a leak-free seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC number identifies the Sierra 64082 gasket?\u003c\/strong\u003e UPC 731957408884 identifies the Sierra 64082 fuel sender gasket, which can be used to confirm you are ordering the correct part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Sierra 64082 gasket fit a Teleflex-branded fuel sender?\u003c\/strong\u003e Yes, because Sierra 64082 cross-references to Teleflex TEL64082, it is the correct gasket for fuel senders that use that Teleflex part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 64082 gasket sold individually or as part of a kit?\u003c\/strong\u003e The Sierra 64082 is sold as a standalone fuel sender gasket, not bundled with the sender or other hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens if the wrong gasket is used on a fuel sender?\u003c\/strong\u003e An incorrect or reused gasket at the fuel sender mounting flange can allow fuel or vapor to leak past the seal, which is why matching the exact part number, such as Sierra 64082, matters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 64082 a genuine OEM part or an aftermarket equivalent?\u003c\/strong\u003e Sierra 64082 is manufactured under the Sierra brand and is offered as the equivalent replacement for the Teleflex TEL64082 gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 64082 gasket made from?\u003c\/strong\u003e The specific gasket material is not specified for the Sierra 64082; it is designed as a sealing gasket for the fuel sender mounting flange.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988450554075,"sku":"SIE-64082","price":5.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-64082__68349.1558189176.500.750.jpg?v=1785188895"},{"product_id":"moeller-035722-10-marine-fuel-tank-sending-unit-6-12-in-tank-depth-33-240-ohm-sae-5-hole","title":"Moeller Fuel Tank Sending Unit, 6-12 Inch Tank Depth, 33-240 Ohm, Part 035722-10","description":"\u003cp\u003eThe Moeller 035722-10 is a fuel tank sending unit built for tanks with a 6 to 12 inch (152 to 305 mm) depth, using a one swing arm design to track fuel level as it changes. It is calibrated to the industry-standard resistance range of 33 to 240 ohms, so it works with a standard dash-mounted fuel gauge (gauge sold separately) without any recalibration on the boat owner's part. The sender bolts to the tank using a SAE 5-hole mounting pattern, and it ships complete with a 5-hole gasket and screws so installation does not require sourcing separate hardware; the gasket and screws are also available separately if replacement is ever needed. Internal components are built from plastic, which resists rust and corrosion in the fuel tank environment better than bare metal contacts, helping the sender hold accurate readings over time. This sending unit is part of a Moeller lineup covering multiple tank depths, and the 035722-10 specifically covers the 6 to 12 inch depth range with a single swing arm; deeper tanks use a different part number in the same series. It mounts directly in place of a compatible sending unit on tanks matching this depth and hole pattern, and pairs with any 33-240 ohm dash gauge for a complete fuel level reading system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035722-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Tank Sending Unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Depth:\u003c\/strong\u003e 6 to 12 inches (152 to 305 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing Arm Configuration:\u003c\/strong\u003e One swing arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance Range:\u003c\/strong\u003e 33 to 240 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Pattern:\u003c\/strong\u003e SAE 5-hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e 5-hole gasket and screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge Compatibility:\u003c\/strong\u003e Compatible with dash-mounted gauge (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729722107\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits fuel tanks with a 6 to 12 inch (152 to 305 mm) depth using a SAE 5-hole mounting pattern. Pairs with any 33-240 ohm dash-mounted fuel gauge.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat tank depth does the Moeller 035722-10 sending unit fit?\u003c\/strong\u003e The Moeller 035722-10 is calibrated for fuel tanks with a 6 to 12 inch (152 to 305 mm) depth, using a one swing arm design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this sending unit include a gauge?\u003c\/strong\u003e No, the Moeller 035722-10 is the sending unit only; it is compatible with a dash-mounted fuel gauge, which is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat resistance range is the 035722-10 calibrated to?\u003c\/strong\u003e It is calibrated to 33 to 240 ohms, the industry-standard resistance range used by standard dash-mounted fuel gauges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the Moeller 035722-10?\u003c\/strong\u003e The 035722-10 sending unit ships complete with a 5-hole gasket and mounting screws for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting pattern does the 035722-10 use?\u003c\/strong\u003e This sending unit uses a SAE 5-hole mounting pattern to bolt to the fuel tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy a replacement gasket for the 035722-10 separately?\u003c\/strong\u003e Yes, the 5-hole gasket and screws used with the Moeller 035722-10 are also sold separately from the sending unit itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Moeller 035722-10 made of?\u003c\/strong\u003e It is made of plastic, which resists rust and corrosion in the fuel tank environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 035722-10 weigh?\u003c\/strong\u003e The Moeller 035722-10 sending unit weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many swing arms does the 035722-10 have?\u003c\/strong\u003e One swing arm, which tracks fuel level across the unit's 6 to 12 inch rated tank depth range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 035722-10 the right part for a deeper fuel tank?\u003c\/strong\u003e No, the 035722-10 is rated for 6 to 12 inch tank depths only; Moeller sends other part numbers in the same series for deeper tanks, so measure tank depth before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Moeller 035722-10?\u003c\/strong\u003e The UPC for the Moeller 035722-10 fuel tank sending unit is 739729722107.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991090082011,"sku":"MOE-035722-10","price":41.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61fMNPyB0VL.jpg?v=1784491250"},{"product_id":"moeller-035728-10-universal-5-hole-gasket-for-fuel-tank-sending-units-electric-and-mechanical-with-screws-and-washers","title":"Moeller Marine 035728-10 5-Hole Fuel Tank Sending Unit Gasket, Electric and Mechanical","description":"\u003cp\u003eThe Moeller Marine 035728-10 is a universal 5-hole gasket designed to seal fuel tank sending units on aluminum, plastic, or stainless steel fuel tanks used on all types of marine vessels. It is built for top-mounted sending unit installations and works with both electric and mechanical sending units calibrated to the industry-standard 33-240 ohm range. The gasket comes complete with a full set of 10\/24 and 10\/32 replacement screws and assorted washers, so the entire mounting hardware set is on hand for a single, complete installation without hunting for separate fasteners.\u003c\/p\u003e\u003cp\u003eConstructed from black plastic in a round profile matched to standard 5-hole sending unit flanges, the 035728-10 is ethanol compliant, making it suitable for use with today's ethanol-blended marine fuels. It exceeds current NMMA (National Marine Manufacturers Association) and ABYC (American Boat and Yacht Council) specifications, giving boat owners a fuel-system seal that meets recognized marine industry standards. This gasket is the correct choice when replacing a worn, cracked, or leaking seal beneath a fuel level sending unit, restoring a tight fuel-tank seal and preventing vapor or fuel leakage at the sending unit flange.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035728-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 5-Hole Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Electric and mechanical fuel tank sending units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top mounting in aluminum, plastic, or stainless steel fuel tanks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 5-hole gasket, 10\/24 and 10\/32 replacement screws, assorted washers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOhm Range Compatibility:\u003c\/strong\u003e 33-240 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e Exceeds NMMA and ABYC specifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEthanol Compliant:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal 5-hole gasket for top-mounted fuel tank sending units on all types of marine vessels; not restricted to a specific make, model, or year.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo specific OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Moeller 035728-10 gasket fit?\u003c\/strong\u003e The 035728-10 is a universal 5-hole gasket for top-mounted fuel tank sending units on aluminum, plastic, or stainless steel fuel tanks used on all types of marine vessels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this gasket work with electric or mechanical sending units?\u003c\/strong\u003e Yes, the 035728-10 gasket is designed to work with both electric and mechanical fuel tank sending units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is included with the 035728-10 gasket?\u003c\/strong\u003e It comes complete with 10\/24 and 10\/32 replacement screws and an assortment of washers, so the full mounting hardware set is included with the gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 035728-10 gasket compatible with ethanol fuel?\u003c\/strong\u003e Yes, this gasket is ethanol compliant, making it suitable for use with ethanol-blended marine fuels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 035728-10 gasket made from?\u003c\/strong\u003e It is a black plastic gasket with a round shape sized to match standard 5-hole sending unit flanges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the gasket meet marine industry standards?\u003c\/strong\u003e The 035728-10 exceeds current NMMA and ABYC specifications for marine fuel system components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 035728-10 gasket weigh?\u003c\/strong\u003e The gasket weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat ohm range is this gasket compatible with?\u003c\/strong\u003e It is designed for use with sending units calibrated to the industry-standard 33-240 ohm range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 035728-10 gasket a genuine Moeller Marine part?\u003c\/strong\u003e Yes, the 035728-10 is a genuine Moeller Marine fuel tank sending unit gasket, not an aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this gasket be used on any type of boat?\u003c\/strong\u003e Yes, the 035728-10 is a universal gasket intended for top-mounted fuel tank sending units on all types of marine vessels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace the sending unit gasket?\u003c\/strong\u003e A worn, cracked, or hardened gasket beneath a fuel tank sending unit can leak fuel or vapor; the 035728-10 restores a tight seal at the sending unit flange.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 035728-10 include a warranty?\u003c\/strong\u003e The 035728-10 gasket is backed by a limited lifetime warranty from Moeller Marine.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991090245851,"sku":"MOE-035728-10","price":15.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/moe0-035728-10_large__61991.1558176156.500.750.jpg?v=1785188209"},{"product_id":"moeller-marine-035725-10-fuel-tank-sending-unit-4-to-28-in-adjustable-depth-33-240-ohm-sae-5-hole","title":"Moeller Marine Fuel Tank Sending Unit 035725-10, 4-28 Inch Tank Depth, 33-240 Ohm","description":"\u003cp\u003eThe Moeller Marine 035725-10 is a fuel tank sending unit built to monitor fuel level on boat tanks with a depth of 4 to 28 inches (102 to 685 mm). The float arm travels through this depth range and converts the fuel level reading into an electrical resistance signal of 33 to 240 ohms, which is the standard calibration used by dash-mounted electric fuel gauges. This sending unit is designed to work with a dash-mounted gauge, which is sold separately and installed at the helm to give the operator a real-time fuel level reading.\u003c\/p\u003e\u003cp\u003eThe float rod assembly measures 1 5\/8 inches in diameter and mounts to the fuel tank using a standard SAE 5-hole bolt pattern, allowing it to install into any tank deck plate machined to that pattern. The unit is constructed of composite material for corrosion resistance in a marine fuel environment. A mounting gasket and screws are included with the sending unit so it is ready to install without needing to source separate hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035725-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Depth Range:\u003c\/strong\u003e 4 to 28 inches (102 to 685 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Rod Diameter:\u003c\/strong\u003e 1 5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance \/ Calibration Range:\u003c\/strong\u003e 33 to 240 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Pattern:\u003c\/strong\u003e SAE 5-hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Gasket and screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Requires a dash-mounted electric fuel gauge (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat tank depth does the Moeller 035725-10 fit?\u003c\/strong\u003e The 035725-10 is calibrated for fuel tanks with a depth of 4 to 28 inches (102 to 685 mm), covering a wide range of tank sizes with a single float rod.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this sending unit come with a fuel gauge?\u003c\/strong\u003e No, the dash-mounted gauge is sold separately. The 035725-10 is the sending unit only, which sends a resistance signal to a gauge installed at the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat ohm range does the 035725-10 sending unit use?\u003c\/strong\u003e It is calibrated to the standard 33 to 240 ohm range used by dash-mounted electric fuel gauges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting pattern does this sending unit use?\u003c\/strong\u003e The Moeller 035725-10 uses a standard SAE 5-hole mounting pattern to bolt into the tank deck plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with the 035725-10?\u003c\/strong\u003e Yes, a gasket and mounting screws are included with the sending unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the diameter of the float rod on the 035725-10?\u003c\/strong\u003e The float rod diameter is 1 5\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Moeller 035725-10 made of?\u003c\/strong\u003e It is made of composite material, chosen for its resistance to corrosion in a marine fuel tank environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 035725-10 sending unit weigh?\u003c\/strong\u003e The sending unit weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 035725-10 work with any dash-mounted fuel gauge?\u003c\/strong\u003e It is compatible with dash-mounted electric fuel gauges that read the standard 33 to 240 ohm range, which is the calibration used by the 035725-10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is the 035725-10 sending unit?\u003c\/strong\u003e It is manufactured by Moeller, a marine fuel system parts maker.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991090311387,"sku":"MOE-035725-10","price":46.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61RxjKo-n-L.jpg?v=1784491266"},{"product_id":"moeller-035724-10-diesel-fuel-tank-sending-unit-with-return-line-35-240-ohm-fits-12-24-in-deep-tanks","title":"Moeller Marine Diesel Fuel Sending Unit with Return Line, 035724-10, Fits 12 to 24 Inch Tanks","description":"\u003cp\u003eThe Moeller Marine 035724-10 is a diesel fuel sending unit built with an integrated return line, designed to meet the return-line requirement found on diesel engines and certain fuel injection engines. It is intended for use in boat fuel tanks ranging from 12 to 24 inches deep and reports fuel level across a 35 to 240 ohm resistance range, matching common dash-mounted fuel gauges. The sending unit uses a swing arm float to track fuel level as it changes, with a 1-way circuit type and a stainless steel construction for durability in a marine fuel tank environment.\u003c\/p\u003e\u003cp\u003eOverall dimensions are 21 1\/2 x 4 7\/8 x 3 inches, and the unit is finished in black. Because fuel level readings from a swing arm float can vary with fuel slosh as the boat moves, momentary fluctuations in the gauge reading are normal and not an indication of a faulty sender. This unit is compatible with diesel engines and fuel injection engines that call for a return line at the sending unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035724-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Sending Unit with Diesel Return Line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Fuel Type:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Depth Compatibility:\u003c\/strong\u003e 12 to 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance Range:\u003c\/strong\u003e 35 to 240 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions (L x W x H):\u003c\/strong\u003e 21 1\/2 x 4 7\/8 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Swing arm float\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 1-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.7 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat tank depths does the Moeller 035724-10 fit?\u003c\/strong\u003e The 035724-10 is designed for fuel tanks that are 12 to 24 inches deep, covering the most common diesel tank depths on recreational boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this sending unit include a return line?\u003c\/strong\u003e Yes, the 035724-10 has a diesel return line built in, meeting the return-line requirement of diesel engines and certain fuel injection engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat resistance range does the 035724-10 use?\u003c\/strong\u003e It reads across a 35 to 240 ohm range, which matches the resistance range expected by common dash-mounted fuel gauges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Moeller 035724-10 made for gasoline or diesel fuel?\u003c\/strong\u003e It is a diesel fuel sending unit, built specifically to meet the return-line requirement of diesel and some fuel injection engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the sending unit made from?\u003c\/strong\u003e The 035724-10 is constructed of stainless steel, chosen for durability inside a marine fuel tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 035724-10?\u003c\/strong\u003e Overall dimensions of the Moeller 035724-10 are 21 1\/2 x 4 7\/8 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does my fuel gauge fluctuate with this sending unit installed?\u003c\/strong\u003e Swing arm float readings, including those from the 035724-10, are subject to momentary fluctuation from fuel slosh as the boat moves; this is normal float behavior, not a fault.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 035724-10 weigh?\u003c\/strong\u003e The 035724-10 weighs 0.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of float mechanism does this sending unit use?\u003c\/strong\u003e It uses a swing arm float to measure fuel level as the float arm moves with changing fuel height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 035724-10 a 1-way or multi-circuit sending unit?\u003c\/strong\u003e The Moeller 035724-10 is a 1-way circuit type sending unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 035724-10 sending unit?\u003c\/strong\u003e The unit is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 035724-10 work with fuel injection engines?\u003c\/strong\u003e Yes, in addition to diesel engines, the 035724-10 is compatible with certain fuel injection engines that require a return line at the sender.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991090376923,"sku":"MOE-035724-10","price":67.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Moeller-Diesel-Electric-Sending-Unit-with-Return-035724-10__35066.1737873811.500.750.jpg?v=1785189143"},{"product_id":"moeller-fuel-tank-sending-unit-with-dash-gauge-kit-mpn-035726-10-universal-4-to-28-in-tank-depth-33-240-ohm-sae-5-hole","title":"Moeller Marine Fuel Tank Sending Unit 035726-10, 4 to 28 Inch Tank Depth, SAE 5-Hole Pattern","description":"\u003cp\u003eThe Moeller Marine fuel tank sending unit, part number 035726-10, is the sensor that mounts inside a boat's fuel tank and reports fuel level to a dash-mounted gauge. It is built to fit tanks with a depth of 4 to 28 inches (102 to 685 mm), covering a wide range of tank sizes found on recreational boats. The sending unit is calibrated to a standard 33 to 240 ohm resistance range, matching the electrical range used by common dash-mounted fuel gauges. It is constructed of plastic with a bare exterior finish and is intended for use with gasoline fuel systems.\u003c\/p\u003e\u003cp\u003eInstallation uses a SAE 5-hole mounting pattern, the industry-standard bolt pattern for marine fuel sending units, so it lines up with the mounting holes already cut into the tank. A gasket and mounting screws are included so the unit can be sealed and installed without sourcing separate hardware. Note that the dash-mounted gauge itself is sold separately from this sending unit; the 035726-10 is compatible with dash-mounted gauges but does not include one. This is a vehicle-specific fit part intended for boat fuel tanks rather than a universal automotive application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035726-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Depth Range:\u003c\/strong\u003e 4 to 28 inches (102 to 685 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance Calibration:\u003c\/strong\u003e 33 to 240 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Pattern:\u003c\/strong\u003e SAE 5-hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Gasket and screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash Gauge Compatibility:\u003c\/strong\u003e Compatible with dash-mounted gauge (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4.88 x 21.5 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Vehicle Specific\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat tank depths does the Moeller 035726-10 fit?\u003c\/strong\u003e The 035726-10 sending unit fits fuel tanks with a depth of 4 to 28 inches (102 to 685 mm), covering most common recreational boat fuel tank sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this sending unit include the dash gauge?\u003c\/strong\u003e No, the dash-mounted gauge is sold separately. The 035726-10 sending unit itself is compatible with dash-mounted gauges but the gauge must be purchased on its own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat resistance range is the 035726-10 calibrated to?\u003c\/strong\u003e It is calibrated to a 33 to 240 ohm range, which is the standard resistance range used by common marine dash-mounted fuel gauges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting pattern does this sending unit use?\u003c\/strong\u003e The 035726-10 uses a SAE 5-hole mounting pattern, the industry-standard bolt pattern for marine fuel tank sending units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with the 035726-10?\u003c\/strong\u003e Yes, a gasket and mounting screws are included with the Moeller 035726-10 sending unit, so no separate hardware needs to be purchased for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Moeller 035726-10 made of?\u003c\/strong\u003e This sending unit is made of plastic with a bare exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 035726-10 sending unit?\u003c\/strong\u003e The unit measures 4.88 x 21.5 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 035726-10 sending unit weigh?\u003c\/strong\u003e The Moeller 035726-10 weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuel type is this sending unit designed for?\u003c\/strong\u003e The 035726-10 is designed for use with gasoline fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Moeller 035726-10 a universal fit or vehicle-specific?\u003c\/strong\u003e It is a vehicle-specific fit part designed for boat fuel tanks, not a universal automotive sending unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 035726-10 be used on any boat fuel tank?\u003c\/strong\u003e It can be used on any boat fuel tank with a depth between 4 and 28 inches, since it is fitted with a standard SAE 5-hole mounting pattern common to marine tanks.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991090442459,"sku":"MOE-035726-10","price":79.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/035726-10__29661.1722479907.500.750.jpg?v=1785188262"},{"product_id":"moeller-035729-10-fuel-tank-sending-unit-12-24-in-tank-depth-sae-5-hole-33-240-ohm-swing-arm","title":"Moeller Fuel Tank Sending Unit 035729-10, 12-24 Inch Tank Depth, Electric Dash Gauge Sender","description":"\u003cp\u003eThe Moeller 035729-10 is a fuel tank sending unit built for tanks with a 12 to 24 inch depth (305 to 610 mm). It uses a single swing arm to track fuel level as the tank empties and fills, and it converts that reading from a standard direct site gauge into a signal an electric dash-mounted gauge can read, calibrated to the standard 33-240 ohm automotive\/marine range. On mechanical units, the direct site gauge is included with the sending unit; if you are wiring up an electric dash gauge, that gauge is sold separately and simply needs to match the 33-240 ohm calibration this sender outputs.\u003c\/p\u003e\u003cp\u003eInstallation uses a SAE 5-hole mounting pattern, and a mounting gasket and screws are included (the gasket is also available separately if it ever needs replacing). The sending unit body is plastic, sized to fit through a standard tank opening at 16.25 x 12 x 5.75 inches overall. It is designed as a like-for-like replacement for existing Moeller sending units in this depth range, and it carries the Moeller UPC 739729729106 for easy cross-checking at the counter or in a parts lookup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035729-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Depth:\u003c\/strong\u003e 12 to 24 inches (305 to 610 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing Arm Configuration:\u003c\/strong\u003e One swing arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Site Gauge:\u003c\/strong\u003e Included on mechanical units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Converts direct site gauge fuel level reading to electric dash-mounted gauge signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibration:\u003c\/strong\u003e 33 to 240 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Pattern:\u003c\/strong\u003e SAE 5-hole pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Gasket and screws (gasket also sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash-Mounted Gauge:\u003c\/strong\u003e Sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 16.25 x 12 x 5.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729729106\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits fuel tanks with a depth of 12 to 24 inches (305 to 610 mm)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat tank depth does the Moeller 035729-10 fit?\u003c\/strong\u003e The 035729-10 is sized for fuel tanks with a depth of 12 to 24 inches (305 to 610 mm), measured from the mounting flange to the bottom of the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this sending unit include the direct site gauge?\u003c\/strong\u003e Yes, on mechanical units the direct site gauge is included with the Moeller 035729-10 sending unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to buy a dash gauge separately?\u003c\/strong\u003e Yes, the electric dash-mounted gauge is sold separately from the 035729-10 sending unit; the sending unit outputs a 33-240 ohm signal that a compatible dash gauge reads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat ohm range does the 035729-10 sending unit use?\u003c\/strong\u003e It is calibrated to a 33-240 ohm range, matching standard electric dash-mounted fuel gauges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many swing arms does this sending unit have?\u003c\/strong\u003e The Moeller 035729-10 uses a single swing arm to track fuel level as the tank fills and empties.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting hardware is included?\u003c\/strong\u003e A mounting gasket and screws come included with the 035729-10; the gasket is also sold separately if a replacement is ever needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mounting hole pattern for this sending unit?\u003c\/strong\u003e The 035729-10 uses a standard SAE 5-hole mounting pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Moeller 035729-10 made of?\u003c\/strong\u003e The sending unit body is made of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 035729-10?\u003c\/strong\u003e Overall item dimensions are 16.25 x 12 x 5.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 035729-10 sending unit weigh?\u003c\/strong\u003e It weighs 0.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the swing-arm reading fluctuate while the boat is moving?\u003c\/strong\u003e Yes, swing-arm sending units like the 035729-10 can show fuel-slosh fluctuations in the reading while underway, which is normal for this style of sender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 035729-10 actually do?\u003c\/strong\u003e It converts the fuel level reading from a standard direct site gauge into a signal an electric dash-mounted gauge can display, at a 33-240 ohm calibration.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991090704603,"sku":"MOE-035729-10","price":42.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/415XWtEBAbL.jpg?v=1784491291"},{"product_id":"moeller-marine-035760-10-fuel-gauge-conversion-capsule-mechanical-direct-site-to-electric-dash-mounted-33-240-ohms","title":"Moeller Marine Conversion Capsule 035760-10, Mechanical to Electric Dash Gauge Converter (33-240 Ohms)","description":"\u003cp\u003eThe Moeller Marine Conversion Capsule, part number 035760-10, converts the fuel level reading from a standard direct site gauge into a signal an electric dash-mounted fuel gauge can read. It is calibrated to the industry-standard 33-240 ohm range, so it works with dash gauges built for that same calibration. This lets a boat owner upgrade from a mechanical, tank-mounted direct site gauge to a convenient electric readout at the helm without replacing the entire fuel sending system.\u003c\/p\u003e\u003cp\u003eThe capsule is molded from plastic for corrosion resistance in the marine fuel tank environment. It attaches to the existing direct site gauge assembly, translating the mechanical float position into an electrical resistance signal within the 33-240 ohm range that a compatible dash gauge expects. The dash-mounted gauge itself is sold separately and is not included with this conversion capsule.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035760-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Converts direct site gauge reading to electric dash-mounted gauge signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Range:\u003c\/strong\u003e 33-240 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4.25 x 5.75 x 6.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Conversion capsule (dash-mounted gauge sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729760109\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Moeller direct site fuel gauge assemblies; a compatible 33-240 ohm dash-mounted electric fuel gauge is required and sold separately.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Moeller 035760-10 conversion capsule do?\u003c\/strong\u003e It converts the fuel level reading from a standard direct site gauge into an electrical signal that an electric dash-mounted gauge can display.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 035760-10 include the dash gauge?\u003c\/strong\u003e No. The dash-mounted gauge is sold separately from the 035760-10 conversion capsule.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat ohm range does this conversion capsule output?\u003c\/strong\u003e The 035760-10 capsule is calibrated to a 33-240 ohm range, matching standard marine dash fuel gauges built for that calibration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 035760-10 capsule made of?\u003c\/strong\u003e It is made of plastic, chosen for its resistance to corrosion inside the fuel tank environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the conversion capsule weigh?\u003c\/strong\u003e The Moeller 035760-10 weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 035760-10?\u003c\/strong\u003e Item dimensions are 4.25 x 5.75 x 6.25 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use my existing mechanical direct site gauge with an electric dash gauge?\u003c\/strong\u003e Yes, that is the purpose of the 035760-10 conversion capsule, which translates the direct site gauge's mechanical float position into an electric resistance signal for a dash gauge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a dash gauge required to use this capsule?\u003c\/strong\u003e Yes, a compatible 33-240 ohm electric dash-mounted fuel gauge is needed to read the signal from the 035760-10 capsule, and it must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many capsules come in the package?\u003c\/strong\u003e The 035760-10 is sold as a single conversion capsule, one unit per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes part number 035760-10?\u003c\/strong\u003e Part number 035760-10 is manufactured by Moeller Marine.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991090835675,"sku":"MOE-035760-10","price":112.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/035760-10__77164.1722370817.500.750.jpg?v=1785188414"},{"product_id":"moeller-035761-10-reed-switch-fuel-sending-unit-for-9-in-deep-tanks-33-240-ohm-marine-fuel-sender-with-gasket-and-screws","title":"Moeller Marine Reed Switch Fuel Sending Unit 035761-10, 9 Inch Deep Tanks, with Gasket and Screws","description":"\u003cp\u003eThe Moeller Marine Reed Switch Fuel Sending Unit, part number 035761-10, is an electronic fuel level sender built for boats with 9 inch deep fuel tanks. Unlike a mechanical swingarm sender, this unit uses a reed switch design that takes its fuel level measurement from a float, collecting fuel level information more consistently than swingarm-style senders and reducing the fluctuation caused by fuel slosh. The sender body is constructed of stainless steel for durability in a marine fuel tank environment.\u003c\/p\u003e\u003cp\u003eThe sending unit is calibrated to the industry standard resistance range of 33-240 Ohms, so it is designed to work with standard marine fuel gauges. Electrically it operates as a normally-open, single-pole, single-throw (SPST), single-circuit switch with an ON-OFF-ON operation mode and screw-type terminal connections, and it mounts as an embedded sender in the tank. As with all Moeller sending units, this sender must be one inch (25.4 mm) shorter than the actual tank depth, so this unit is sized for a 9 inch (229 mm) deep tank. It is rated suitable for use with gasoline, ethanol, diesel, and bio-diesel fuels as well as non-potable water, is fire-rated, and meets ISO 10088, ISO 8846, and ABYC H-24 requirements. The unit ships complete with a mounting gasket and screws for installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035761-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Electronic Reed Switch Fuel Sending Unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Depth Rating:\u003c\/strong\u003e 9 inches (229 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizing Rule:\u003c\/strong\u003e Sender must be 1 inch (25.4 mm) shorter than tank depth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance Range:\u003c\/strong\u003e 33-240 Ohms (industry standard calibration)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Float \/ Reed Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e ON-OFF-ON\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 1-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal:\u003c\/strong\u003e SPST\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Embedded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluid Compatibility:\u003c\/strong\u003e Gasoline, ethanol, diesel, bio-diesel, non-potable water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ISO 10088, ISO 8846, ABYC H-24, UL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Gasket, mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1 x 2 x 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 43.18 L x 15.24 W x 3.555 H (cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729000014\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for marine fuel tanks with a 9 inch (229 mm) tank depth; universal fit is not restricted to a specific engine or boat make.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat tank depth is the Moeller 035761-10 fuel sending unit designed for?\u003c\/strong\u003e The 035761-10 is designed for a 9 inch (229 mm) deep fuel tank, since Moeller sending units are sized to sit 1 inch (25.4 mm) shorter than the actual tank depth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this sender a mechanical swingarm type or an electronic type?\u003c\/strong\u003e Part number 035761-10 is an electronic reed switch sending unit, not a mechanical swingarm sender, so it collects fuel level information from a float more consistently and is not affected by the fuel-slosh fluctuations that can affect swingarm-style senders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat resistance range is the 035761-10 sender calibrated to?\u003c\/strong\u003e It is calibrated to the industry standard range of 33-240 Ohms, matching standard marine fuel gauges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the electrical configuration of this sending unit?\u003c\/strong\u003e The 035761-10 operates as a normally-open, single-pole, single-throw (SPST) switch with a 1-way circuit and an ON-OFF-ON operation mode, using screw-type terminal connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuels is the Moeller 035761-10 rated to work with?\u003c\/strong\u003e This sending unit is rated suitable for gasoline, ethanol, diesel, bio-diesel, and non-potable water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 035761-10 fuel sending unit meet any marine safety standards?\u003c\/strong\u003e Yes, it is fire-rated and meets the requirements of ISO 10088, ISO 8846, and ABYC H-24.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the sending unit made from?\u003c\/strong\u003e The 035761-10 sender is constructed of stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 035761-10 come with mounting hardware?\u003c\/strong\u003e Yes, this fuel sending unit ships complete with a mounting gasket and screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 035761-10 sending unit weigh?\u003c\/strong\u003e The Moeller 035761-10 weighs 0.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the sender mounted in the tank?\u003c\/strong\u003e The 035761-10 uses an embedded mounting type, installing directly into the fuel tank with the included gasket and screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Moeller 035761-10 sending unit?\u003c\/strong\u003e The unit is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this sender work if my tank is deeper or shallower than 9 inches?\u003c\/strong\u003e The 035761-10 is sized specifically for a 9 inch (229 mm) deep tank; Moeller offers other part numbers in the same series for other tank depths, so a different depth requires a different part number.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991090999515,"sku":"MOE-035761-10","price":92.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71E4RoTJNZL.jpg?v=1784491315"},{"product_id":"moeller-035765-10-reed-switch-fuel-sending-unit-15-in-tank-depth-33-240-ohm-stainless-steel-with-gasket-and-screws","title":"Moeller Reed Switch Fuel Sending Unit, 15 Inch Tank Depth, Stainless Steel","description":"\u003cp\u003eThis Moeller reed switch fuel sending unit is built for 15 inch deep fuel tanks and uses electrical reed switch operation to track fuel level more consistently than a traditional swing-arm sender. Fuel measurements are taken directly from the float as it rises and falls with tank level, and the sender's float arm is calibrated to the industry-standard resistance range of 33-240 Ohms, so it works with standard marine fuel gauges without special calibration. The sender body is constructed of stainless steel for corrosion resistance in a marine fuel environment, and the unit is supplied complete with a gasket and mounting screws for a full replacement installation. The sender element itself measures 14 inches, intentionally 1 inch shorter than the 15 inch tank depth it is rated for, so it sits properly off the tank floor. Connection is made via screw terminals for a simple electrical hookup, and the sender mounts through a panel-style opening on top of the fuel tank. This is a normally-open contact float switch design, suited for boats with 15 inch deep fuel tanks needing a direct sender replacement.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035765-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Reed Switch Sending Unit - 15 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Depth Rating:\u003c\/strong\u003e 15 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender Length:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Electrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch\/Actuator Type:\u003c\/strong\u003e Reed Switch Float Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance Range:\u003c\/strong\u003e 33-240 Ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw Terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Sending unit, gasket, mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Devices:\u003c\/strong\u003e Marine Fuel Gauges, Marine Fuel Management Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e ETL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729000045\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat tank depth is the Moeller 035765-10 sending unit designed for?\u003c\/strong\u003e The Moeller 035765-10 is designed for fuel tanks with a 15 inch depth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the sender element itself?\u003c\/strong\u003e The sender element on part number 035765-10 measures 14 inches, which is 1 inch shorter than the 15 inch tank depth it is rated for, so the float clears the bottom of the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat resistance range does this sending unit output?\u003c\/strong\u003e It is calibrated to the industry-standard range of 33-240 Ohms, so it reads correctly on standard marine fuel gauges without extra calibration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a resistive sender or a switch?\u003c\/strong\u003e The 035765-10 uses electrical reed switch operation with a normally-open contact type, and fuel measurements are taken from the float position as it moves with the fuel level.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the sending unit made from?\u003c\/strong\u003e Moeller builds the 035765-10 sending unit from stainless steel for corrosion resistance in a marine fuel tank environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this sending unit?\u003c\/strong\u003e The Moeller 035765-10 ships complete with the sending unit, a gasket, and mounting screws for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this sender connect to gauge wiring?\u003c\/strong\u003e Connection is made through screw terminals, and the unit mounts to the tank in a panel-mount configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this sender work with my existing fuel gauge?\u003c\/strong\u003e Because the 035765-10 outputs the industry-standard 33-240 Ohm range, it is compatible with standard marine fuel gauges and fuel management systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a reed switch sender compare to a swing-arm sender?\u003c\/strong\u003e Moeller notes that this reed switch design collects fuel level information more consistently than a swing-arm sender, since the reading is taken directly from the float position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 035765-10 sending unit certified?\u003c\/strong\u003e Yes, this Moeller sending unit carries ETL certification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of this sending unit?\u003c\/strong\u003e The Moeller 035765-10 sending unit weighs 0.6 pounds.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991091097819,"sku":"MOE-035765-10","price":99.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71ZxV57QRhS.jpg?v=1784491321"},{"product_id":"moeller-035767-10-reed-switch-fuel-sending-unit-for-18-5-in-deep-tanks-abyc-h-24","title":"Moeller Reed Switch Fuel Sending Unit 18-1\/2 Inch Tank Depth, ABYC H-24, Part 035767-10","description":"\u003cp\u003eThe Moeller 035767-10 is an electrical reed switch fuel sending unit built for boat fuel tanks with an 18-1\/2 inch (445 mm) depth. It mounts through a flange on top of the tank and uses a float-driven reed switch to send a fuel level signal to a compatible gauge, letting the helm display an accurate reading of remaining fuel. The unit meets ABYC H-24, the American Boat and Yacht Council standard governing fuel gauging systems, so it is built to the tolerances and safety expectations marine fuel senders are held to.\u003c\/p\u003e\u003cp\u003eConstruction is plastic with stainless steel contacts inside the reed switch, and the sender operates on a normally-open, 1-way electrical circuit connected through screw terminals. It comes complete with a gasket and mounting screws, so the flange can be sealed and fastened to the tank without sourcing separate hardware. Because it is a swing-arm float design, readings can fluctuate briefly with fuel slosh as the boat moves, which is normal for this style of sender rather than a sign of a faulty unit.\u003c\/p\u003e\u003cp\u003eThis sending unit is sized specifically for 18-1\/2 inch deep tanks; installing it in a tank of a different depth will not give an accurate reading, so confirm tank depth before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035767-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Depth:\u003c\/strong\u003e 18-1\/2 inches (445 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e ABYC H-24\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Reed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Electrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 1-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Flange mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2 x 4 x 21 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Gasket and mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC\/GTIN:\u003c\/strong\u003e 039729000053, 739729000052\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat tank depth does the Moeller 035767-10 fit?\u003c\/strong\u003e The Moeller 035767-10 is built for fuel tanks with an 18-1\/2 inch (445 mm) depth, and it should only be installed in a tank matching that depth for an accurate reading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this sending unit electrical or mechanical?\u003c\/strong\u003e It is an electrical reed switch sending unit, part number 035767-10, using a normally-open reed switch and screw terminal connections rather than a mechanical or resistive design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 035767-10 meet any marine industry standard?\u003c\/strong\u003e Yes, the 035767-10 meets ABYC H-24, the American Boat and Yacht Council standard for fuel gauging systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 035767-10 sending unit?\u003c\/strong\u003e The 035767-10 ships complete with a gasket and mounting screws, so it can be installed and sealed to the tank without buying additional hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the sending unit made of?\u003c\/strong\u003e The body is plastic, and the reed switch contacts inside are stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 035767-10 mounted to the tank?\u003c\/strong\u003e It uses a flange mount that seats on top of the tank opening and is secured with the included mounting screws and gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the fuel gauge reading fluctuate while underway?\u003c\/strong\u003e This is a swing-arm float sender, so brief fuel-slosh fluctuations in the gauge reading are a normal characteristic of this design, not a defect in the 035767-10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the circuit type on this sending unit?\u003c\/strong\u003e The 035767-10 uses a 1-way, normally-open circuit connected through screw terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the outer dimensions and weight of the unit?\u003c\/strong\u003e The 035767-10 measures 2 x 4 x 21 inches and weighs 0.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 035767-10 rated for any environmental protection?\u003c\/strong\u003e Yes, it carries an IP54 protection rating.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991091228891,"sku":"MOE-035767-10","price":132.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71Qk6gUujeS.jpg?v=1784491328"},{"product_id":"moeller-035762-10-reed-switch-fuel-sending-unit-for-11-in-deep-marine-tanks-stainless-steel-top-mount","title":"Moeller Marine 035762-10 Reed Switch Fuel Sending Unit, 11 Inch Tank Depth, Stainless Steel","description":"\u003cp\u003eThe Moeller Marine 035762-10 is an electrical reed switch fuel sending unit built for boats with fuel tanks 11 inches deep. Unlike swingarm-style senders, this reed switch design takes its fuel measurement from a float traveling along the sender body, which collects fuel level information more consistently than swingarm senders that can be affected by fuel-slosh fluctuations. The sending unit is constructed of stainless steel for durability in a marine fuel tank environment and is finished in black.\u003c\/p\u003e\u003cp\u003eElectrically, the sender operates on a normally open, 1-way reed switch circuit with a screw terminal connector for wiring, and it mounts through the top of the tank using a plunger-style actuator. It carries an IP54 ingress protection rating and is fire-rated, meeting the requirements of ISO 10088 and ISO 8846 as well as ABYC H-24. The sender is suitable for use with gasoline, ethanol, diesel, bio-diesel, and non-potable water.\u003c\/p\u003e\u003cp\u003eCorrect sizing is critical for accurate readings: the sending unit must be one inch (25.4 mm) shorter than the actual tank depth, so this 11 inch (254 mm) unit is intended for tanks with an 11 inch depth. It comes complete with a gasket and mounting screws for installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035762-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender Length:\u003c\/strong\u003e 11 inches (254 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired Tank Depth:\u003c\/strong\u003e Sender must be 1 inch (25.4 mm) shorter than tank depth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Electrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Reed switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 1-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Top mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Plunger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e ABYC H-24, ISO 10088, ISO 8846 (fire-rated)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluid Compatibility:\u003c\/strong\u003e Gasoline, ethanol, diesel, bio-diesel, non-potable water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729000021\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for fuel tanks with an 11 inch (254 mm) depth. As a general rule for this sender family, the unit must be one inch (25.4 mm) shorter than the tank's actual depth for accurate readings, so verify tank depth before ordering.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat tank depth does the Moeller 035762-10 fit?\u003c\/strong\u003e This sending unit is 11 inches (254 mm) long and is sized for fuel tanks with an 11 inch depth, since the sender must be 1 inch (25.4 mm) shorter than the actual tank depth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this sending unit measure fuel level?\u003c\/strong\u003e The 035762-10 uses a reed switch and float that travels along the sender body, which collects fuel level information more consistently than swingarm-style senders that can be thrown off by fuel-slosh fluctuations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the electrical configuration of this sender?\u003c\/strong\u003e The 035762-10 is a normally open, 1-way reed switch circuit that connects via a screw terminal connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fuel sending unit compatible with ethanol fuel?\u003c\/strong\u003e Yes, the Moeller 035762-10 is suitable for gasoline, ethanol, diesel, bio-diesel, and non-potable water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 035762-10 sending unit made of?\u003c\/strong\u003e It is constructed of stainless steel and finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this sender meet fire safety standards?\u003c\/strong\u003e The 035762-10 is fire-rated and meets the requirements of ISO 10088 and ISO 8846, and it complies with ABYC H-24.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 035762-10 mount to the fuel tank?\u003c\/strong\u003e It is a top-mount sending unit with a plunger-style actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Moeller 035762-10?\u003c\/strong\u003e The sending unit comes complete with a gasket and mounting screws for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat ingress protection rating does this sender have?\u003c\/strong\u003e The 035762-10 carries an IP54 ingress protection rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 035762-10 weigh?\u003c\/strong\u003e This sending unit weighs 0.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is fuel level measured from on this sender?\u003c\/strong\u003e Fuel measurements on the 035762-10 are taken from the float, rather than from a swingarm mechanism.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre other tank depths available in this sender line?\u003c\/strong\u003e The 035762-10 is the 11 inch (254 mm) length version; other lengths in this series are sold under different Moeller part numbers for different tank depths.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991091261659,"sku":"MOE-035762-10","price":94.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71IGSUHpuaS.jpg?v=1784491329"},{"product_id":"moeller-035764-10-reed-switch-fuel-sending-unit-for-13-in-deep-tanks-305-mm-electric-12-ohm-marine-gauge-sender","title":"Moeller Fuel Sending Unit 035764-10, Electric Reed Switch, 13 Inch Tank Depth","description":"\u003cp\u003eThe Moeller 035764-10 is an electric reed switch fuel sending unit built for boats with a 13 inch tank depth. The sender itself measures 12 inches, since sending units must always be installed one inch shorter than the actual tank depth to allow the float to travel freely and give an accurate reading on the fuel gauge. It uses a reed switch actuator with normally open contacts and a 1-way circuit, paired with a flush mount marine connector for a clean deck-level installation.\u003c\/p\u003e\u003cp\u003eThis sending unit is rated for use with gasoline, ethanol, diesel, bio-diesel, and non-potable water, and it is fire-rated to meet the requirements of ISO 10088, ISO 8846, and ABYC H-24, making it suitable as a direct OEM-style replacement in gasoline and diesel fuel systems alike. Construction is plastic with copper and brass contacts, finished in black, and the unit carries an IP54 ingress protection rating for resistance to dust and splashing water in an engine bay or below-deck fuel compartment. The sending unit is complete with a gasket and mounting screws for installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035764-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Depth:\u003c\/strong\u003e 13 inches (305 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender Length:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Electrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Marine Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Float Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Reed Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 1-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Flush Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e Automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Copper, Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1 x 4 x 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluid Compatibility:\u003c\/strong\u003e Gasoline, ethanol, diesel, bio-diesel, non-potable water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ISO 10088, ISO 8846, ABYC H-24\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Sending unit, gasket, mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729000038\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits fuel tanks with a 13 inch tank depth\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat tank depth does the Moeller 035764-10 fit?\u003c\/strong\u003e The Moeller 035764-10 is sized for fuel tanks with a 13 inch tank depth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the sending unit shorter than the tank depth?\u003c\/strong\u003e Sending units are made one inch shorter than the tank depth so the float can travel freely and give an accurate reading; the 035764-10 measures 12 inches for a 13 inch deep tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this sending unit compatible with diesel fuel?\u003c\/strong\u003e Yes, the Moeller 035764-10 is rated for gasoline, ethanol, diesel, bio-diesel, and non-potable water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat certifications does this fuel sender meet?\u003c\/strong\u003e It is fire-rated and meets ISO 10088, ISO 8846, and ABYC H-24 requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of switch mechanism does the 035764-10 use?\u003c\/strong\u003e It uses an electrical reed switch actuator with normally open contacts and a 1-way circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the sending unit made of?\u003c\/strong\u003e The Moeller 035764-10 is constructed of plastic with copper and brass contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it come with mounting hardware?\u003c\/strong\u003e Yes, the 035764-10 is complete with a gasket and mounting screws for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 035764-10 mounted in the tank?\u003c\/strong\u003e It uses a flush mount marine connector at the top of the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the ingress protection rating?\u003c\/strong\u003e The Moeller 035764-10 carries an IP54 ingress protection rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the sending unit?\u003c\/strong\u003e The 035764-10 is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the unit?\u003c\/strong\u003e The item dimensions are 1 x 4 x 14 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 035764-10 weigh?\u003c\/strong\u003e It weighs 0.6 pounds.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991091392731,"sku":"MOE-035764-10","price":96.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71VDTFfo_2S.jpg?v=1784491338"},{"product_id":"moeller-035773-10-reed-switch-fuel-sending-unit-5-in-sender-for-6-in-tank-depth-33-240-ohm-316-stainless-steel","title":"Moeller 035773-10 Reed Switch Fuel Sending Unit, 5 Inch Length, 6 Inch Tank Depth, 33-240 Ohm, Stainless Steel","description":"\u003cp\u003eThe Moeller 035773-10 is a reed switch fuel sending unit built for boats that need consistent, accurate fuel level readings at the helm. Unlike a swingarm sender, which reads fuel level from an arm that pivots through the tank, a reed switch sender takes its measurement directly from the float itself. Because the float has a much smaller range of motion than a swingarm, the reading is far less affected by fuel slosh as the boat moves, giving a steadier gauge display.\u003c\/p\u003e\u003cp\u003eThis sending unit is calibrated to the standard 33 to 240 ohm range used by 12 volt marine fuel gauges, so it works with typical gauge setups without special calibration. It is built from Type 316 stainless steel for corrosion resistance in a marine environment, and it is fire-rated for use with gasoline, ethanol, diesel, bio-diesel, and non-potable water, meeting the requirements of ISO 10088, ISO 8846, and ABYC H-24. The sender measures 5 inches in length and is designed for a 6 inch tank depth; Moeller sending units must be installed one inch shorter than the actual tank depth, which this unit is sized for. Mounting hardware is included.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035773-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Reed Switch Fuel Sending Unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance Range:\u003c\/strong\u003e 33 to 240 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Depth:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel (Type 316)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Compatibility:\u003c\/strong\u003e Gasoline, ethanol, diesel, bio-diesel, and non-potable water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ISO 10088, ISO 8846, ABYC H-24\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3.5 x 2.75 x 11.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.65 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Moeller 035773-10 fuel sending unit?\u003c\/strong\u003e It is a reed switch fuel sending unit that measures fuel level from a float inside the tank and sends that reading to a 12 volt fuel gauge as a resistance value between 33 and 240 ohms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tank depth does the Moeller 035773-10 fit?\u003c\/strong\u003e This sender is sized for a 6 inch tank depth. Moeller sending units are designed to sit one inch shorter than the actual tank depth, and this unit's 5 inch length matches a 6 inch deep tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is a reed switch sender different from a swingarm sender?\u003c\/strong\u003e A reed switch sender, like the Moeller 035773-10, reads fuel level directly from the float, which has a much smaller range of motion than a swingarm. This means the gauge reading fluctuates less from fuel slosh compared to swingarm-style senders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the resistance range of the Moeller 035773-10?\u003c\/strong\u003e It is calibrated to 33 to 240 ohms, the standard range used by 12 volt marine fuel gauges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Moeller 035773-10 made from?\u003c\/strong\u003e The Moeller 035773-10 is constructed of Type 316 stainless steel for corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this sending unit be used with diesel or ethanol-blended fuel?\u003c\/strong\u003e Yes. The 035773-10 is fire-rated and suitable for gasoline, ethanol, diesel, bio-diesel, and non-potable water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Moeller 035773-10 meet any marine safety standards?\u003c\/strong\u003e It meets the requirements of ISO 10088 and ISO 8846, as well as ABYC H-24.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Moeller 035773-10?\u003c\/strong\u003e The unit measures 3.5 x 2.75 x 11.5 inches and weighs 0.65 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Moeller 035773-10 come with mounting hardware?\u003c\/strong\u003e Yes, mounting hardware is included with the 035773-10 sending unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan fuel slosh affect the reading from the Moeller 035773-10?\u003c\/strong\u003e All fuel level senders are subject to some fuel-slosh fluctuation, but because the 035773-10 is a reed switch design that reads from the float, its readings fluctuate less than a swingarm sender's.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Moeller 035773-10 a 12 volt unit?\u003c\/strong\u003e Yes, the 035773-10 is a 12 volt fuel sending unit.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991091425499,"sku":"MOE-035773-10","price":89.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41Sx0CU1KVL.jpg?v=1784491339"},{"product_id":"moeller-620003lp-epa-replacement-cap-pickup-and-gauge-for-ultra-3-gallon-11l-portable-fuel-tank","title":"Moeller 620003LP Replacement Pickup for Ultra 3 Gallon\/11L Fuel Tank","description":"\u003cp\u003eThe Moeller 620003LP is a genuine replacement fuel pickup assembly built for the Moeller Ultra 3 portable fuel tank (3 gallon\/11 liter capacity). Over time, the pickup inside a portable fuel tank can wear, crack, or lose its seal, causing poor fuel draw, air in the line, or engine starving issues. This replacement pickup restores proper fuel delivery from the tank to the engine without requiring you to replace the entire tank.\u003c\/p\u003e\u003cp\u003eDesigned as a direct-fit part for the Ultra 3 gallon\/11 liter tank line, the 620003LP drops in using the tank's existing opening, so no modification or fabrication is needed. It is sold as the pickup component only, making it an economical fix when the tank body itself is still in good condition but the internal pickup has failed or degraded.\u003c\/p\u003e\u003cp\u003eThis part is intended specifically for the Ultra 3 (3 gallon\/11 liter) tank configuration; buyers with a different Moeller tank size should confirm they are ordering the pickup matched to their specific tank model.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 620003LP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Replacement fuel pickup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Tank:\u003c\/strong\u003e Ultra 3 (3 Gallon\/11 Liter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729012109\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMoeller Ultra 3 (3 Gallon\/11 Liter) portable fuel tank\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Moeller 620003LP?\u003c\/strong\u003e The Moeller 620003LP is a replacement fuel pickup assembly designed for the Moeller Ultra 3 portable fuel tank, which has a 3 gallon\/11 liter capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich fuel tank does the 620003LP fit?\u003c\/strong\u003e It is built to fit the Moeller Ultra 3 (3 gallon\/11 liter) portable fuel tank specifically.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 620003LP fit a 6 gallon Moeller tank?\u003c\/strong\u003e No. The 620003LP is matched to the 3 gallon\/11 liter Ultra 3 tank; larger Moeller tanks such as the 6 gallon Ultra 6 use a different replacement pickup part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this part weigh?\u003c\/strong\u003e The Moeller 620003LP weighs 5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Moeller part?\u003c\/strong\u003e Yes, the 620003LP is a genuine Moeller replacement pickup, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace the pickup on my fuel tank?\u003c\/strong\u003e A worn, cracked, or poorly sealed fuel pickup inside a portable tank can cause air in the fuel line and poor engine draw; replacing the pickup with the 620003LP restores proper fuel delivery without replacing the entire tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation straightforward?\u003c\/strong\u003e The 620003LP is a direct-fit replacement for the Ultra 3 gallon\/11 liter tank opening, so no modification or fabrication is required to install it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 620003LP include the fuel cap or gauge?\u003c\/strong\u003e The 620003LP is the pickup assembly only; it does not include the tank's cap or fuel gauge as part of this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Moeller 620003LP?\u003c\/strong\u003e The UPC for the Moeller 620003LP replacement pickup is 739729012109.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this pickup on a different brand of fuel tank?\u003c\/strong\u003e The 620003LP is designed specifically to match the Moeller Ultra 3 (3 gallon\/11 liter) tank and is not confirmed to fit tanks from other manufacturers.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991101714651,"sku":"MOE-620003LP","price":166.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MOE-620003LP_lg__86199.1672838928.500.750.jpg?v=1785329130"},{"product_id":"moeller-620049lp-replacement-fuel-pickup-for-6-gallon-23l-ultra-6-portable-fuel-tank","title":"Moeller 620049LP Replacement Fuel Pickup Assembly with Cap and Gauge for 6 Gallon\/23L Ultra 6 Tanks","description":"\u003cp\u003eThe Moeller 620049LP is a replacement fuel pickup assembly built for 6 Gallon\/23L Ultra 6 portable fuel tanks. It is designed to replace a worn or damaged factory pickup unit so the tank can keep being used instead of being discarded, restoring proper fuel draw and tank sealing on the tank it was engineered for.\u003c\/p\u003e\u003cp\u003eThe assembly includes a replacement cap and a fuel gauge, so the buyer gets a complete top-of-tank solution rather than a bare pickup tube. The cap seals the tank opening while the integrated gauge lets the operator monitor fuel level without removing the cap or guessing at remaining capacity.\u003c\/p\u003e\u003cp\u003eOverall assembly dimensions are 16.60 in. L x 8.50 in. W x 9.60 in. H (422 mm L x 216 mm W x 244 mm H), and the complete unit weighs 8 pounds. It is manufactured by Moeller under part number 620049LP and is intended specifically for the 6 Gallon\/23L Ultra 6 tank line, not for other Moeller tank capacities, which use their own distinct pickup assemblies.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 620049LP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Replacement Fuel Pickup Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Tank Capacity:\u003c\/strong\u003e 6 Gallon\/23L (Ultra 6)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Replacement Cap and Fuel Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 16.60 in. L x 8.50 in. W x 9.60 in. H (422 mm L x 216 mm W x 244 mm H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729012116\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat tank does the Moeller 620049LP fit?\u003c\/strong\u003e The Moeller 620049LP replacement pickup assembly is designed for 6 Gallon\/23L Ultra 6 portable fuel tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with part number 620049LP?\u003c\/strong\u003e This assembly includes a replacement cap and a fuel gauge along with the pickup, so the entire top-of-tank unit is covered in one part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 620049LP have a fuel gauge?\u003c\/strong\u003e Yes, a fuel gauge is included as part of the 620049LP replacement pickup assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this pickup assembly?\u003c\/strong\u003e The Moeller 620049LP measures 16.60 in. L x 8.50 in. W x 9.60 in. H, equivalent to 422 mm L x 216 mm W x 244 mm H.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 620049LP weigh?\u003c\/strong\u003e The complete 620049LP replacement pickup assembly weighs 8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 620049LP a genuine Moeller part number?\u003c\/strong\u003e Yes, 620049LP is the manufacturer part number Moeller assigns to this specific replacement pickup assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this pickup assembly fit a 9 Gallon Moeller tank?\u003c\/strong\u003e No, the 620049LP is built for 6 Gallon\/23L Ultra 6 tanks; larger Moeller tanks such as the 9 Gallon\/34L size use a different replacement pickup part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the replacement cap come sealed and ready to install?\u003c\/strong\u003e The 620049LP assembly includes the replacement cap as part of the complete pickup unit for the 6 Gallon\/23L Ultra 6 tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Moeller 620049LP?\u003c\/strong\u003e The UPC for the Moeller 620049LP replacement pickup assembly is 739729012116.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace the pickup assembly instead of the whole tank?\u003c\/strong\u003e The 620049LP lets you restore a 6 Gallon\/23L Ultra 6 tank by replacing the cap, gauge, and pickup as one assembly rather than replacing the entire tank.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991102435547,"sku":"MOE-620049LP","price":131.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MOE-620049LP__33948.1722477899.500.750.jpg?v=1785329130"},{"product_id":"moeller-630012lp-12-gallon-epa-marine-fuel-tank-45l-tall-profile-below-deck-tank-with-gauge-cap-and-pickup","title":"Moeller Marine 630012LP 12 Gallon Tall Replacement Fuel Tank Pickup with Gauge Cap","description":"\u003cp\u003eThe Moeller Marine 630012LP is a 12 gallon (45 liter) tall-profile replacement pickup assembly designed for permanent fuel tanks. It replaces the original pickup tube and cap assembly on a compatible 12 gallon tank, restoring a proper fuel draw and a sealed cap fitting in one component. The assembly includes a replacement cap fitted with a fuel gauge, so boat owners can monitor fuel level directly at the tank opening rather than relying on a separate sending unit. This is the tall version of Moeller's 12 gallon replacement pickup line, with a footprint of 22.75 inches long by 14.00 inches wide and a height of 13.95 inches (578 mm x 356 mm x 354 mm). The taller height distinguishes it from Moeller's low profile 12 gallon pickup (a separate part number), so boat owners should confirm which profile their tank opening requires before ordering. The unit is intended as a direct-fit replacement for permanent fuel tanks in the 12 gallon capacity class, simplifying maintenance when an original pickup tube, cap, or gauge has failed or is leaking.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 630012LP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 12 gallons (45 liters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Tall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 22.75 inches (578 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 14.00 inches (356 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 13.95 inches (354 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Replacement cap with integrated fuel gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729011980\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Permanent Fuel Tanks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 12 gallon (45 liter) permanent fuel tanks that accept the tall-profile Moeller pickup and cap assembly with overall dimensions of 22.75 inches L x 14.00 inches W x 13.95 inches H.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size tank does the Moeller 630012LP fit?\u003c\/strong\u003e The Moeller Marine 630012LP is sized for a 12 gallon (45 liter) permanent fuel tank, with a tall-profile cap and pickup footprint of 22.75 inches long by 14.00 inches wide and 13.95 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pickup assembly include a fuel gauge?\u003c\/strong\u003e Yes, the 630012LP's replacement cap has an integrated fuel gauge, so fuel level can be read directly at the tank opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 630012LP and the low profile version?\u003c\/strong\u003e The 630012LP is the tall-profile 12 gallon pickup, standing 13.95 inches high, while Moeller's low profile 12 gallon pickup is a separate part number at 10.82 inches high. The two are not interchangeable, so confirm the height your tank opening requires before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 630012LP weigh?\u003c\/strong\u003e The Moeller Marine 630012LP weighs 10 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 630012LP pickup assembly?\u003c\/strong\u003e The 630012LP measures 22.75 inches long by 14.00 inches wide by 13.95 inches high (578 mm x 356 mm x 354 mm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 630012LP a genuine Moeller part?\u003c\/strong\u003e Yes, 630012LP is the manufacturer part number for this Moeller Marine 12 gallon tall replacement pickup assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the 630012LP?\u003c\/strong\u003e The 630012LP includes the replacement pickup assembly and cap with its integrated fuel gauge, sized for a 12 gallon fuel tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tank capacity is the 630012LP designed for?\u003c\/strong\u003e This pickup assembly is designed for 12 gallon (45 liter) capacity permanent fuel tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 630012LP be used to replace a failed or leaking pickup tube?\u003c\/strong\u003e Yes, the 630012LP is intended as a replacement pickup and cap assembly for a 12 gallon permanent fuel tank when the original pickup tube, cap, or gauge needs replacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of fuel tank does the 630012LP belong to?\u003c\/strong\u003e The Moeller 630012LP is listed under permanent fuel tanks, for tanks fixed in place rather than portable fuel tanks.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991102697691,"sku":"MOE-630012LP","price":235.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Moeller_12_Gallon_Portable_Fuel_Tank__30078.1737824582.500.750.jpg?v=1785329132"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/Moeller_12_Gallon_Portable_Fuel_Tank__30078.1737824582.500.750.jpg?v=1785356551","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-engine-parts-systems-fuel-system-fuel-tanks-tank-hardware-fuel-senders-fuel-gauges.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}