{"title":"Fuel Tank Vents, Caps \u0026 Gaskets","description":null,"products":[{"product_id":"shields-fire-acol-fuel-vent-hose-5-8-in-x-10-ft-uscg-type-a2-sierra-116-369-0583","title":"Sierra Shields Fire-Acol Fuel Vent Hose 16-369-0583, 5\/8 Inch x 10 Feet, USCG Type A2","description":"\u003cp\u003eThe Sierra Shields Fire-Acol Fuel Vent Hose (16-369-0583) is a 5\/8 inch inside diameter marine fuel vent hose supplied in a 10 foot Polypac length. It is built to resist gasoline and alcohol blended fuels and is fire resistant, making it suited for use as a fuel vent line on gasoline engines running fuels blended up to 85% ethanol as well as diesel fuel systems. The hose features a weather and UV resistant NBR\/PVC cover that protects the hose from marine environmental exposure over time.\u003c\/p\u003e\u003cp\u003eThis hose carries an inside diameter of 5\/8 inch (15.9 mm) and an outside diameter of 31\/32 inch (24.6 mm), with a maximum working pressure rating of 50 psi. It is rated for a temperature range of -20 degrees F to 160 degrees F. The hose meets USCG Type A2 requirements for pleasure boats, and meets SAE J1527 Type A2, ISO 7840 Type A2, and NMMA\/CE Type accepted standards, confirming its suitability for fuel vent line service on recreational boats.\u003c\/p\u003e\u003cp\u003eBecause it is a vent line hose rather than a fuel feed hose, it is intended for routing fuel tank vapor rather than pressurized fuel supply. It is sold as a single 10 foot length, ready to cut to the run required for the installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 16-369-0583\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter:\u003c\/strong\u003e 5\/8 inch (15.9 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 31\/32 inch (24.6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure:\u003c\/strong\u003e 50 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Class Code:\u003c\/strong\u003e C-25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.76 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e NBR\/PVC cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multicolored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e -20 degrees F to 160 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards Compliance:\u003c\/strong\u003e USCG Type A2, SAE J1527 Type A2, ISO 7840 Type A2, NMMA\/CE Type accepted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Fuel vent lines for gasoline up to 85% ethanol blended fuels and diesel fuel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFire Resistance:\u003c\/strong\u003e Resists gasoline\/alcohol blended fuel and is fire resistant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal marine fuel vent hose sized at 5\/8 inch inside diameter; no specific make, engine, or model fitment is specified.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the inside diameter of the Sierra 16-369-0583 fuel vent hose?\u003c\/strong\u003e The Sierra 16-369-0583 Shields Fire-Acol Fuel Vent Hose has a 5\/8 inch (15.9 mm) inside diameter and a 31\/32 inch (24.6 mm) outside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this hose?\u003c\/strong\u003e Part number 16-369-0583 is sold in a 10 foot length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose fire resistant?\u003c\/strong\u003e Yes, the Shields Fire-Acol Fuel Vent Hose is fire resistant and resists gasoline\/alcohol blended fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuels is this vent hose rated for?\u003c\/strong\u003e The 16-369-0583 hose is rated for gasoline blended fuels up to 85% ethanol, as well as diesel fuel, when used as a fuel vent line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can this hose handle?\u003c\/strong\u003e This hose is rated for a temperature range of -20 degrees F to 160 degrees F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum working pressure of this hose?\u003c\/strong\u003e The maximum working pressure for the 16-369-0583 fuel vent hose is 50 psi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hose material?\u003c\/strong\u003e The 16-369-0583 hose has an NBR\/PVC cover that is weather and UV resistant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hose meet marine safety standards?\u003c\/strong\u003e Yes, the Sierra Shields Fire-Acol Fuel Vent Hose meets USCG Type A2 requirements for pleasure boats, along with SAE J1527 Type A2, ISO 7840 Type A2, and NMMA\/CE Type accepted standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a fuel feed hose or a fuel vent hose?\u003c\/strong\u003e The 16-369-0583 is a fuel vent hose, designed for venting fuel tank vapor rather than supplying pressurized fuel feed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this hose weigh?\u003c\/strong\u003e The 10 foot length of the Sierra 16-369-0583 fuel vent hose weighs 2.76 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this hose?\u003c\/strong\u003e The Sierra 16-369-0583 fuel vent hose is multicolored.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part?\u003c\/strong\u003e Yes, part number 16-369-0583 is a genuine Sierra Shields Fire-Acol Fuel Vent Hose.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988019458267,"sku":"SIE-16-369-0583","price":41.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51hAucXKoqL.jpg?v=1784385303"},{"product_id":"sierra-18-2881-9-fuel-tank-housing-to-tank-gasket-replaces-johnson-evinrude-332403-fits-6-gallon-portable-fuel-tanks-pack-of-2","title":"Sierra 18-2881-9 Housing to Tank Gasket, Replaces 332403 125530, for 6 Gallon Fuel Tank, Pack of 2","description":"\u003cp\u003eThe Sierra 18-2881-9 Housing to Tank Gasket seals the connection between the fuel pickup housing and a 6 gallon outboard fuel tank, restoring a tight seal that prevents fuel leaks and air intrusion at the housing-to-tank joint. Each package contains 2 gaskets, giving you a spare or enough material to service two tanks in one order. This gasket is a direct fit replacement designed to meet or exceed the performance of the original equipment part it replaces, making it a straightforward swap during routine fuel system maintenance or when an old gasket has hardened, cracked, or lost its seal. Because a worn housing-to-tank gasket is a common source of fuel odor, weeping fuel, or a tank that will not hold pressure properly, replacing it with the correct Sierra part restores reliable operation without needing to replace the entire fuel tank housing assembly. The gasket is manufactured by Sierra International, a supplier of marine engine and fuel system parts, and is intended specifically for use with 6 gallon fuel tanks. Keep a package on hand as part of routine outboard fuel tank upkeep so a small, inexpensive gasket does not turn into a bigger fuel system problem.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2881-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Housing to Tank Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Pack of 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 6 Gallon Fuel Tank\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e6 Gallon Fuel Tank\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e332403\u003c\/li\u003e\n\u003cli\u003e125530\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2881-9 gasket fit?\u003c\/strong\u003e The Sierra 18-2881-9 Housing to Tank Gasket is made for 6 gallon fuel tanks, sealing the joint between the fuel pickup housing and the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets come in a package?\u003c\/strong\u003e Each package of the Sierra 18-2881-9 Housing to Tank Gasket contains 2 gaskets, sold as a pack of 2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich OEM part numbers does this gasket replace?\u003c\/strong\u003e This gasket replaces OEM numbers 332403 and 125530.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2881-9 gasket a genuine Sierra part or aftermarket?\u003c\/strong\u003e It is a genuine Sierra part manufactured by Sierra International, engineered to meet or exceed the performance of the original equipment gasket it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the gasket weigh?\u003c\/strong\u003e The Sierra 18-2881-9 Housing to Tank Gasket weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace the housing to tank gasket on my fuel tank?\u003c\/strong\u003e Replace the gasket if you notice fuel odor, visible leaking, or weeping at the housing-to-tank joint on a 6 gallon fuel tank, as these are signs the seal has hardened or worn out, which the Sierra 18-2881-9 is designed to fix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this gasket fit tanks other than a 6 gallon fuel tank?\u003c\/strong\u003e No, the Sierra 18-2881-9 Housing to Tank Gasket is specified for use with 6 gallon fuel tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of the 18-2881-9 gasket straightforward?\u003c\/strong\u003e Yes, it is a direct replacement gasket that installs at the housing-to-tank joint in place of the original gasket, requiring no modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-2881-9?\u003c\/strong\u003e An order of the Sierra 18-2881-9 includes one package containing 2 Housing to Tank Gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Sierra 18-2881-9 work as a replacement for a cracked or hardened original gasket?\u003c\/strong\u003e Yes, it is intended as a direct replacement for a worn, cracked, or hardened original housing-to-tank gasket on a 6 gallon fuel tank.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988132540635,"sku":"SIE-18-2881-9","price":7.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-2881-9__84599.1722359227.500.750.jpg?v=1785188168"},{"product_id":"fuel-tank-gasket-for-6-gallon-tank-replaces-oem-332403-125530-johnson-evinrude-sierra-18-2887-9-pack-of-2","title":"Sierra Fuel Tank Gasket 18-2887-9, Replaces 302557, Pack of 2","description":"\u003cp\u003eThe Sierra 18-2887-9 Fuel Tank Gasket is a replacement gasket built for Johnson and Evinrude fuel tank applications. It seals the connection at the fuel tank fitting to prevent fuel leaks and maintain a proper seal between mating surfaces, restoring the fit and function of the original equipment gasket it replaces. This gasket is sold as a package of two, so buyers have a spare on hand or enough to service two tanks in a single order.\u003c\/p\u003e\u003cp\u003eSierra manufactures this gasket to meet or exceed the performance of the original equipment part number it replaces, making it a straightforward drop-in replacement for Johnson and Evinrude fuel tanks that use the 302557 gasket. It is a lightweight, low-cost wear item that is worth replacing any time a fuel tank fitting is removed or serviced, since a worn or compressed gasket is a common source of small fuel leaks or a loose fuel tank seal.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2887-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Fuel Tank Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Pack of 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282163921\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eJohnson and Evinrude fuel tank applications\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e302557\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2887-9 fuel tank gasket fit?\u003c\/strong\u003e The 18-2887-9 fuel tank gasket is built for Johnson and Evinrude fuel tank applications, sealing the fuel tank fitting to prevent leaks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets come in a package of 18-2887-9?\u003c\/strong\u003e Each package of the Sierra 18-2887-9 fuel tank gasket contains 2 gaskets, so you have a spare or enough for two tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does 18-2887-9 replace?\u003c\/strong\u003e 18-2887-9 replaces OEM part number 302557 on applicable Johnson and Evinrude fuel tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-2887-9 gasket weigh?\u003c\/strong\u003e The 18-2887-9 fuel tank gasket weighs 0.13 pounds per package of 2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2887-9 gasket genuine OEM or aftermarket?\u003c\/strong\u003e 18-2887-9 is a Sierra aftermarket replacement gasket manufactured to meet or exceed the performance of the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace the fuel tank gasket on my Johnson or Evinrude tank?\u003c\/strong\u003e Replace the 18-2887-9 gasket any time the fuel tank fitting is removed for service or if you notice a fuel leak or loose seal at the fitting, since the gasket is a wear item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order 18-2887-9?\u003c\/strong\u003e An order of Sierra 18-2887-9 includes one package containing 2 fuel tank gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan 18-2887-9 be used on other outboard brands besides Johnson and Evinrude?\u003c\/strong\u003e The 18-2887-9 gasket is designated for Johnson and Evinrude fuel tank applications; fitment on other brands is not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-2887-9 gasket come with an installation guide?\u003c\/strong\u003e The 18-2887-9 package includes the gaskets only; no separate installation guide is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-2887-9 fuel tank gasket?\u003c\/strong\u003e The UPC for the Sierra 18-2887-9 fuel tank gasket, pack of 2, is 808282163921.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988132933851,"sku":"SIE-18-2887-9","price":10.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_f94400a4-a129-4a25-9e5d-1c57a39d2384.jpg?v=1785353674"},{"product_id":"sierra-18-6501-rewind-spring-for-johnson-evinrude-outboards-replaces-omc-395460-307573","title":"Sierra 18-6501 Fuel Tank Gasket, Replaces OEM 302557, Package of 2","description":"\u003cp\u003eThe Sierra 18-6501 Fuel Tank Gasket is a direct-fit replacement gasket engineered to replace OEM number 302557. It is sold as a package of 2, so you get a matched pair of gaskets in a single purchase rather than having to order two separate units. The gasket is designed to seat between the fuel tank and its mating surface to maintain a tight seal, helping prevent fuel leaks and vapor loss at the tank connection. Because it is manufactured to the OEM 302557 reference, it is intended to install as a drop-in match without modification for applications that originally used that part number.\u003c\/p\u003e\u003cp\u003eEach package weighs 0.3 pounds, making it a lightweight, low-cost maintenance item that is easy to keep on hand as a spare when servicing a fuel tank. As a Sierra branded part, it carries the manufacturer part number 18-6501 for easy reordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6501\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2 gaskets per package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces (OEM):\u003c\/strong\u003e 302557\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999236487\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits applications that originally used OEM fuel tank gasket 302557.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e302557\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does the Sierra 18-6501 fuel tank gasket replace?\u003c\/strong\u003e It replaces OEM number 302557, and the Sierra 18-6501 is manufactured to match that original part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets are included with part number 18-6501?\u003c\/strong\u003e The 18-6501 is sold as a package of 2 gaskets, not as a single unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy a single Sierra 18-6501 gasket instead of a pair?\u003c\/strong\u003e No, the 18-6501 is only sold as a package of 2 gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-6501 fuel tank gasket weigh?\u003c\/strong\u003e The package weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6501 an OEM or aftermarket part?\u003c\/strong\u003e It is an aftermarket replacement gasket manufactured by Sierra to replace OEM number 302557.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-6501 fuel tank gasket?\u003c\/strong\u003e The UPC is 030999236487.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the 18-6501 gasket fits my boat's fuel tank?\u003c\/strong\u003e Check whether your original gasket or its documentation references OEM number 302557, since the Sierra 18-6501 is built to replace that specific part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-6501 come with installation hardware?\u003c\/strong\u003e The package includes 2 gaskets only; no additional hardware is specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6501 gasket reusable after removal?\u003c\/strong\u003e Gaskets are generally intended for single use once compressed and removed, which is why the 18-6501 is sold as a package of 2 for replacement needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand manufactures part number 18-6501?\u003c\/strong\u003e Sierra manufactures the 18-6501 fuel tank gasket.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988357689563,"sku":"SIE-18-6501","price":15.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-6501_lg__46748.1558129078.500.750.jpg?v=1785188134"},{"product_id":"sea-dog-335690-1-universal-deck-fill-key-304-stainless-steel-multi-tool-fits-all-sea-dog-fuel-fills-and-most-competitor-deck-fills","title":"Sea-Dog Universal Deck Fill Key, Stamped 304 Stainless Steel Multi-Tool, 335690-1","description":"\u003cp\u003eThe Sea-Dog Universal Deck Fill Key (335690-1) is a multi-function tool built to fit all Sea-Dog fuel fills as well as most other deck fill brands on the market. Boaters use it to open and close deck plate fills for fuel, water, and waste tanks without needing a separate wrench for each fitting. Beyond turning deck fills, the key doubles as a shackle key, a bottle opener, and a straight blade screwdriver, and it includes both a 5\/16 inch and a 7\/16 inch hex head wrench, making it a handy all-in-one tool to keep aboard.\u003c\/p\u003e\u003cp\u003eIt is stamped from 304 stainless steel, giving it resistance to the corrosive effects of saltwater and marine air so it holds up to repeated use in a wet environment. The key measures 4 inches along its longest dimension and is compact enough to store in a tool kit, glove box, or dock bag.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 335690-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 2-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex Wrench Sizes:\u003c\/strong\u003e 5\/16 inch and 7\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional Functions:\u003c\/strong\u003e Shackle key, bottle opener, straight blade screwdriver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits all Sea-Dog fuel fills and most other competitor fills\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 335690-1 deck fill key used for?\u003c\/strong\u003e The Sea-Dog 335690-1 is a deck fill key used to open and close deck plate fuel, water, or waste fills, and it fits all Sea-Dog fuel fills as well as most other competitor fills.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this key fit deck fills from other brands, not just Sea-Dog?\u003c\/strong\u003e Yes, the 335690-1 Universal Deck Fill Key is designed to fit all Sea-Dog fuel fills as well as most other deck fill brands on the market.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 335690-1 deck fill key made of?\u003c\/strong\u003e It is stamped from 304 stainless steel, which resists corrosion in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the deck fill key do anything besides open fuel fills?\u003c\/strong\u003e Yes, the 335690-1 also functions as a shackle key, a bottle opener, and a straight blade screwdriver, and it includes a 5\/16 inch and a 7\/16 inch hex head wrench.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is the Sea-Dog 335690-1 deck fill key?\u003c\/strong\u003e The key measures 4 inches at dimension A, with additional dimensions of 2-3\/4 inches, 1-1\/16 inches, and 1-3\/16 inches at points B, C, and D.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 335690-1 deck fill key weigh?\u003c\/strong\u003e The Sea-Dog Universal Deck Fill Key weighs 0.13 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hex wrench sizes are built into this tool?\u003c\/strong\u003e The 335690-1 includes both a 5\/16 inch and a 7\/16 inch hex head wrench built into the key.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog deck fill key resistant to rust?\u003c\/strong\u003e Yes, it is constructed of stamped 304 stainless steel, which is corrosion resistant and suited to saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this key on my boat's water or waste deck fills, not just fuel?\u003c\/strong\u003e The 335690-1 Universal Deck Fill Key fits all Sea-Dog fuel fills as well as most other competitor deck fills, making it suitable wherever a compatible deck fill fitting is used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog part?\u003c\/strong\u003e Yes, the 335690-1 is a genuine Sea-Dog Universal Deck Fill Key, made from stamped 304 stainless steel.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988755558619,"sku":"S-D-335690-1","price":9.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4766.jpg?v=1784428880"},{"product_id":"sea-dog-flip-top-gas-deck-fill-1-1-2-hose-investment-cast-316-stainless-steel-hinged-cap-351110","title":"Sea-Dog Flip Top Gas Fill 351110, 1-1\/2 Inch Hose, 316 Stainless Steel, Silver","description":"\u003cp\u003eThe Sea-Dog Flip Top Gas Fill (part number 351110) is a deck-mounted fuel fill fitting built for boats using a 1-1\/2 inch fill hose. A convenient thumb latch opens the fill for fueling, and the hinged lid design guarantees the cap will not fall overboard and get lost at sea. The fitting is constructed of investment cast 316 stainless steel, a corrosion-resistant material well suited to saltwater and marine deck environments where standard steel or plated hardware would eventually rust or pit.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the fill mounts to the deck using four #10 flat head fasteners (not included), and per USCG regulations a bonding wire must be connected to prevent sparking during fueling. The unit is finished in silver and measures 6 inches long by 5 inches wide overall, with a nominal wall thickness of 0.125 inches, weighing 2.04 pounds. If the internal lever and cap ever wear out, Sea-Dog offers a separate Stainless Lever \u0026amp; Cap Rebuild Kit (351119) containing a lever, lever spring, two pivot pins, a cotter pin, a cap spring, and a gasket\/washer, so the whole fitting does not need to be replaced.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 6 inches L x 5 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Length:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Wall Thickness:\u003c\/strong\u003e 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Requirement:\u003c\/strong\u003e Four #10 flat head fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514351102\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal deck fill fitting sized for a 1-1\/2 inch fill hose; no make, model, or year restrictions are specified.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Sea-Dog 351110 Flip Top Gas Fill accept?\u003c\/strong\u003e It is sized for a 1-1\/2 inch fill hose, as marked on the Sea-Dog 351110 Flip Top Gas Fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog Flip Top Gas Fill made of stainless steel?\u003c\/strong\u003e Yes, the Sea-Dog 351110 Flip Top Gas Fill is constructed of investment cast 316 stainless steel, chosen for its corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog 351110 deck fill installed?\u003c\/strong\u003e It mounts to the deck with four #10 flat head fasteners, which are not included with the fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Flip Top Gas Fill require a bonding wire?\u003c\/strong\u003e Yes, USCG regulations require a bonding wire on the Sea-Dog 351110 Flip Top Gas Fill to prevent sparking during fueling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog 351110 gas fill?\u003c\/strong\u003e The Sea-Dog Flip Top Gas Fill is finished in silver.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the Sea-Dog Flip Top Gas Fill?\u003c\/strong\u003e It measures 6 inches long by 5 inches wide, with a nominal wall thickness of 0.125 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 351110 gas fill weigh?\u003c\/strong\u003e The Sea-Dog 351110 Flip Top Gas Fill weighs 2.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Sea-Dog 351100 and 351110 gas fills?\u003c\/strong\u003e The 351100 is sized for a 2 inch fill hose while the 351110 is sized for a 1-1\/2 inch fill hose; both are the same investment cast 316 stainless steel Flip Top Gas Fill design but fit different hose diameters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the lever and cap on the Sea-Dog Flip Top Gas Fill be rebuilt?\u003c\/strong\u003e Yes, Sea-Dog offers a Stainless Lever \u0026amp; Cap Rebuild Kit (part number 351119) for the Flip Top Gas Fill, containing a lever, lever spring, two pivot pins, a cotter pin, a cap spring, and a gasket\/washer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the thumb latch on the Sea-Dog 351110 work?\u003c\/strong\u003e A thumb latch opens the hinged lid on the Flip Top Gas Fill, and the hinged design guarantees the cap will not fall overboard while fueling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 351110 Flip Top Gas Fill?\u003c\/strong\u003e The UPC for this Sea-Dog Flip Top Gas Fill is 035514351102.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 351110 gas fill a genuine Sea-Dog part?\u003c\/strong\u003e Yes, the 351110 Flip Top Gas Fill is a genuine Sea-Dog Line product, not an aftermarket equivalent.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988759064795,"sku":"S-D-351110","price":78.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4798.jpg?v=1784428919"},{"product_id":"sea-dog-351320k-gas-deck-fill-with-key-1-1-2-hose-316-stainless-steel","title":"Sea-Dog Stainless Steel Gas Deck Fill with Key, 1-1\/2 Inch Hose, 351320K","description":"\u003cp\u003eThe Sea-Dog 351320K is a stainless steel gas deck fill designed to give boaters a durable, corrosion-resistant fuel filling point on deck. Marked \"Gas\" on the body for clear fuel identification, it connects to a 1-1\/2 inch hose and is built from investment cast 316 stainless steel, a grade chosen for its resistance to saltwater corrosion and long service life in marine environments. The slotted cap has a 1-7\/8 inch diameter and uses an 11-1\/2 NPSM straight thread pitch, and it opens and closes with the included stainless steel Deck Fill Key (351399), so no separate tool purchase is needed. An attachment chain keeps the cap tethered to the fitting, reducing the chance of it being dropped or lost overboard during fueling.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the deck fill mounts with three #10 FH fasteners (not included) and is compatible with the standard 1-1\/2 inch hose size used across many boats. Because this fitting is used for fuel, USCG regulations require a bonding wire be connected to prevent sparking, and a flange gasket (351349) is sold separately to complete a watertight seal at installation. Note that this is the GAS version of this deck fill; a WATER version using the same body style is sold separately under part number 351322K, so be sure to select the correct part number for your intended use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351320K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluid Marking:\u003c\/strong\u003e Gas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 1-7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 3 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 3 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #10 FH (three required, not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Stainless Deck Fill Key (351399), attachment chain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.96 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514352390\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for boats using a standard 1-1\/2 inch fuel fill hose.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 351320K used for?\u003c\/strong\u003e The 351320K is a stainless steel deck fill used to fill a boat's fuel tank from the deck, marked \"Gas\" to identify it as a fuel fitting rather than a water fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does this deck fill connect to?\u003c\/strong\u003e This deck fill is sized for a 1-1\/2 inch hose connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 351320K come with a key to open the cap?\u003c\/strong\u003e Yes, a stainless steel Deck Fill Key (351399) is included and is required to open and close the slotted cap on the 351320K.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 351320K made from?\u003c\/strong\u003e It is constructed of investment cast 316 stainless steel, chosen for its resistance to corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the cap diameter and thread specs?\u003c\/strong\u003e The cap diameter is 1-7\/8 inch, with an 11-1\/2 NPSM straight thread pitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 351320K installed?\u003c\/strong\u003e It installs with three #10 FH fasteners, which are not included, and mounts flush to the deck at the marked location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 351320K weigh?\u003c\/strong\u003e The Sea-Dog 351320K deck fill weighs 0.96 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a gasket included with the 351320K?\u003c\/strong\u003e No, the flange gasket (351349) is sold separately from the 351320K deck fill and should be ordered to complete a watertight installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a bonding wire requirement for this deck fill?\u003c\/strong\u003e Yes, USCG regulations require a bonding wire be connected at the 351320K to prevent sparking, since it is a fuel fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 351320K and the 351322K?\u003c\/strong\u003e The 351320K is marked for Gas while the 351322K is the equivalent deck fill marked for Water; they share the same body style but are separate part numbers, so order the one matching your intended fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a locking version of this deck fill available?\u003c\/strong\u003e Yes, Sea-Dog offers a Locking Hose Deck Fill (351320L) for the same 1-1\/2 inch gas hose application, which is a different part number from the standard 351320K.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cap stay attached when opened?\u003c\/strong\u003e Yes, the 351320K includes an attachment chain that keeps the cap tethered to the fitting so it is not lost when opened for fueling.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988759130331,"sku":"S-D-351320K","price":48.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7145.jpg?v=1784428924"},{"product_id":"sea-dog-351320l-1-locking-gas-deck-fill-316-stainless-steel-1-1-2-in-hose","title":"Sea-Dog Locking Gas Deck Fill 351320L-1, 1-1\/2 Inch Hose, 316 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog 351320L-1 Locking Hose Deck Fill secures a boat's gas fill point against fuel theft while providing the standard 1-1\/2 inch hose connection used on most recreational fuel systems. The cap locks in place and spins freely once locked, so it cannot be forced or pried off; to open it, the owner turns the supplied key until the key hole lines up with the cap tabs. Two keys are included along with a cap attachment cable so the cap can't be misplaced dockside.\u003c\/p\u003e\u003cp\u003eThe deck fill body and cap are investment cast from 316 stainless steel, giving it strong resistance to salt-air corrosion and long-term durability in a marine environment. The cap measures 2-1\/8 inches in diameter with an 11-1\/2 NPSM straight thread pitch. The fitting is color-coded and marked with the international symbol for gasoline, making it easy to visually confirm the correct deck fill during fueling. Installation is with three #10 flat head fasteners (not included), and per USCG regulations a bonding wire must be connected to the fitting to prevent sparking during fueling.\u003c\/p\u003e\u003cp\u003eThis is the gas-specific version of Sea-Dog's Locking Hose Deck Fill line, built for 1-1\/2 inch hose. Matching diesel and water versions, and a 2 inch hose version, are sold separately under their own part numbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351320L-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 3-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 3-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #10 flat head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock Type:\u003c\/strong\u003e Key lock, includes two keys\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Two keys, cap attachment cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.342 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for boats with a 1-1\/2 inch gas fill hose and a standard deck fill mounting hole; not vehicle or engine specific.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does this deck fill fit?\u003c\/strong\u003e The Sea-Dog 351320L-1 connects to 1-1\/2 inch hose, the standard size used on most gas fuel fill lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this deck fill lock?\u003c\/strong\u003e Yes. The 351320L-1 has a locking cap that spins freely once locked, preventing it from being forced or pried open; two keys are included to unlock it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the deck fill made of?\u003c\/strong\u003e It is investment cast from 316 stainless steel, chosen for its resistance to salt-air corrosion in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the cap dimensions and thread size?\u003c\/strong\u003e The cap on the 351320L-1 is 2-1\/8 inches in diameter with an 11-1\/2 NPSM straight thread pitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included?\u003c\/strong\u003e No. The 351320L-1 installs with three #10 flat head fasteners that are purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you know it's the gas version and not diesel or water?\u003c\/strong\u003e This part, 351320L-1, is color-coded and marked with the international symbol for gasoline; Sea-Dog sells matching diesel and water versions under different part numbers, so check the marking before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bonding wire required?\u003c\/strong\u003e Yes. USCG regulations require a bonding wire to be connected to the deck fill to prevent sparking during fueling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the 351320L-1?\u003c\/strong\u003e The package includes the locking deck fill body and cap, two keys, and a cap attachment cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this deck fill weigh?\u003c\/strong\u003e The Sea-Dog 351320L-1 weighs 1.342 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the cap or attachment cable be replaced separately?\u003c\/strong\u003e Yes. Sea-Dog offers a replacement non-locking cap (351391-1) and a replacement attachment cable (0P35105) for this deck fill line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog part?\u003c\/strong\u003e Yes, the 351320L-1 is a genuine Sea-Dog investment cast 316 stainless steel locking deck fill, not an aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fit a 2 inch hose instead of 1-1\/2 inch?\u003c\/strong\u003e No. The 351320L-1 is built for 1-1\/2 inch hose; Sea-Dog's 351330L is the 2 inch hose gas version.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988759163099,"sku":"S-D-351320L-1","price":85.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4807.jpg?v=1784428930"},{"product_id":"sea-dog-351320-1-gas-deck-fill-1-1-2-in-hose-investment-cast-316-stainless-steel-with-locking-key-and-chain","title":"Sea-Dog 351320-1 Cast 316 Stainless Steel 1-1\/2 Inch Gas Deck Fill with Key","description":"\u003cp\u003eThe Sea-Dog 351320-1 is a 1-1\/2 inch hose gas deck fill built from investment cast 316 stainless steel for corrosion resistance in a marine environment. It is designed for filling a boat's gas tank through the deck, with a slotted cap that requires the included key to open and close, adding a layer of security against unauthorized access or tampering at the fill point. The cap diameter measures 1-7\/8 inches, and the fill uses an 11-1\/2 NPSM straight thread pitch. A chain attaches the cap to the fill base so the cap cannot be misplaced once removed for fueling.\u003c\/p\u003e\u003cp\u003eThis deck fill installs with three #10 flat head fasteners (not included), so the installer will need to source the appropriate hardware separately. Because it is a fitting for a boat's fuel system, USCG regulations require a bonding wire to be connected to prevent sparking; the deck fill itself does not include the bonding wire. The overall item measures 3.5 x 5.25 x 7.88 inches. This is the gas-specific version of Sea-Dog's keyed hose deck fill line; a separate 2 inch version with a 2-1\/8 inch cap diameter is also made, so boat owners should confirm the 1-1\/2 inch hose size matches their existing fuel fill hose before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351320-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Gas Deck Fill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1-1\/2 Inch (Gas)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3.5 x 5.25 x 7.88 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.966 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners:\u003c\/strong\u003e Three #10 flat head screws (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Attachment chain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514351669\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Sea-Dog 351320-1 deck fill fit?\u003c\/strong\u003e The Sea-Dog 351320-1 is built for a 1-1\/2 inch I.D. Gas fill hose, with a cap diameter of 1-7\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this deck fill come with a key?\u003c\/strong\u003e Yes, the 351320-1 includes a key; the cap is slotted and requires the key to open and close for added security at the fuel fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 351320-1 deck fill made from?\u003c\/strong\u003e It is made from investment cast 316 stainless steel, chosen for corrosion resistance in marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread pitch does this deck fill use?\u003c\/strong\u003e The Sea-Dog 351320-1 uses an 11-1\/2 NPSM straight thread pitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the deck fill installed?\u003c\/strong\u003e It installs with three #10 flat head fasteners, which are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bonding wire included with this deck fill?\u003c\/strong\u003e No. USCG regulations require a bonding wire on the fill to prevent sparking, but the 351320-1 does not include the bonding wire itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 351320-1 deck fill weigh?\u003c\/strong\u003e The Sea-Dog 351320-1 weighs 0.966 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this deck fill?\u003c\/strong\u003e The 351320-1 measures 3.5 x 5.25 x 7.88 inches overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the cap attached to the deck fill base?\u003c\/strong\u003e Yes, the cap on the 351320-1 is secured to the deck fill base by an attachment chain so it cannot be dropped or lost during fueling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this deck fill for gas or diesel?\u003c\/strong\u003e The Sea-Dog 351320-1 is the gas-specific version of this deck fill line, sized for a 1-1\/2 inch gas fill hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 351320-1 deck fill?\u003c\/strong\u003e It has a natural stainless steel finish, listed as steel in color.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988759195867,"sku":"S-D-351320-1","price":48.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4768.jpg?v=1784428932"},{"product_id":"sea-dog-351322-1-stainless-steel-water-deck-fill-for-1-1-2-hose-keyed-locking-cap-316-cast-ss","title":"Sea-Dog Locking Water Deck Fill, 1-1\/2 Inch Hose, 316 Stainless Steel","description":"\u003cp\u003eThis Sea-Dog deck fill is marked for Water and is built to accept a 1-1\/2 inch hose, making it the fitting to install where a boat's fresh water fill line meets the deck. It uses a locking cap to help prevent tampering: the cap spins freely while in the locked position, and to unlock it the key is turned until the keyhole lines up with the cap tabs. Two keys are included along with a cap attachment cable so the cap cannot be misplaced once removed.\u003c\/p\u003e\u003cp\u003eThe cap has a 2-1\/8 inch diameter with an 11-1\/2 NPSM straight thread pitch, and the deck fill is color-coded with an international symbol so crew and fuel dock staff can identify the Water fill at a glance. The body is constructed of investment cast 316 stainless steel for corrosion resistance and long-term durability in a marine environment. It installs with three #10 flat head fasteners (not included). As with other through-deck fittings that connect to below-deck lines, USCG regulations require a bonding wire be attached to prevent sparking.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351322-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Fill Marking:\u003c\/strong\u003e Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 2-1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment cast 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Key-operated locking cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Two keys and cap attachment cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Fasteners:\u003c\/strong\u003e Three #10 flat head screws (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding Requirement:\u003c\/strong\u003e USCG-required bonding wire to prevent sparking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.968 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does this deck fill accept?\u003c\/strong\u003e The Sea-Dog 351322-1 deck fill is built for a 1-1\/2 inch hose connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this deck fill marked for?\u003c\/strong\u003e It carries a Water marking with an international symbol, identifying it for a boat's fresh water fill line rather than fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cap lock?\u003c\/strong\u003e Yes, the cap on the Sea-Dog 351322-1 locks with a key; it spins freely while in the locked position, and lines up with the cap tabs to unlock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many keys come with it?\u003c\/strong\u003e Two keys are included with this Sea-Dog Water deck fill, along with a cap attachment cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the deck fill made from?\u003c\/strong\u003e It is constructed of investment cast 316 stainless steel for corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the cap dimensions and thread type?\u003c\/strong\u003e The cap measures 2-1\/8 inch in diameter and uses an 11-1\/2 NPSM straight thread pitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install it?\u003c\/strong\u003e Installation requires three #10 flat head fasteners, which are not included with the Sea-Dog 351322-1 deck fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bonding wire required for installation?\u003c\/strong\u003e Yes, USCG regulations require a bonding wire be connected to this deck fill to prevent sparking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the deck fill weigh?\u003c\/strong\u003e The Sea-Dog Water deck fill weighs 0.968 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the cap be removed without the key?\u003c\/strong\u003e No, the cap on this deck fill spins freely when locked and only releases once the key aligns the keyhole with the cap tabs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the same fitting as the Gas or Diesel versions?\u003c\/strong\u003e No, this SKU is marked Water; the Gas and Diesel deck fills in the same series are separate parts (351320L-1 and 351321L-1) with different color-coded markings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this deck fill?\u003c\/strong\u003e The Sea-Dog 351322-1 includes the Water deck fill body with locking cap, two keys, and a cap attachment cable.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988759425243,"sku":"S-D-351322-1","price":48.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7144_15685e31-ed0a-4f75-a039-e3ab9dc901be.jpg?v=1784428949"},{"product_id":"sea-dog-351391-1-replacement-cap-for-2-hose-deck-fill-316-stainless-steel-with-chain-and-locking-key-slot","title":"Sea-Dog Replacement Non-Locking Cap for 2 Inch Hose Deck Fills, 351391-1","description":"\u003cp\u003eThe Sea-Dog 351391-1 is a replacement non-locking cap for Sea-Dog 2 inch hose deck fills. It is designed to replace the locking cap on the 2 inch hose Gas and Diesel deck fill assemblies, giving boat owners a quick-access, key-free option for their deck fill. The cap measures 2-1\/8 inches in diameter and uses an 11-1\/2 NPSM straight thread pitch to mate with the deck fill body.\u003c\/p\u003e\u003cp\u003eIt is machined from investment cast 316 stainless steel for corrosion resistance and long-term durability in a marine environment. The cap is sold as a standalone replacement part, separate from the deck fill body, hose barb, and fasteners.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351391-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Replacement Non-Locking Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Deck Fill Hose Size:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment cast 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.322 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 2.69 x 4.44 x 1.69 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514351027\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Sea-Dog 351330L (Gas) 2 inch hose locking deck fill\u003c\/li\u003e\n\u003cli\u003eCompatible with Sea-Dog 351331L (Diesel) 2 inch hose locking deck fill\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 351391-1?\u003c\/strong\u003e The Sea-Dog 351391-1 is a replacement non-locking cap for 2 inch hose deck fills, sold as a standalone spare cap rather than a complete deck fill assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 351391-1 lock with a key?\u003c\/strong\u003e No, the 351391-1 is the non-locking version of the cap, unlike the standard locking cap that comes on the Sea-Dog 351330L and 351331L deck fills.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cap diameter of the 351391-1?\u003c\/strong\u003e The cap diameter is 2-1\/8 inches, with an 11-1\/2 NPSM straight thread pitch for mating to the deck fill body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat deck fills is this cap compatible with?\u003c\/strong\u003e The 351391-1 fits Sea-Dog 351330L (2 inch hose, Gas) and 351331L (2 inch hose, Diesel) locking hose deck fills.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 351391-1 cap made of?\u003c\/strong\u003e It is machined from investment cast 316 stainless steel, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 351391-1 weigh?\u003c\/strong\u003e This replacement cap weighs 0.322 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 351391-1 cap?\u003c\/strong\u003e The product dimensions are 2.69 x 4.44 x 1.69 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 351391-1 a full deck fill or just the cap?\u003c\/strong\u003e It is just the cap, part number 351391-1, intended to replace the cap on an existing 2 inch hose deck fill assembly rather than the entire unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 351391-1 on both gas and diesel deck fills?\u003c\/strong\u003e Yes, the 351391-1 is compatible with both the 351330L Gas and 351331L Diesel 2 inch hose deck fills since it shares the same 2-1\/8 inch, 11-1\/2 NPSM straight thread cap fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the thread pitch on the 351391-1 cap?\u003c\/strong\u003e The thread pitch is 11-1\/2 NPSM straight.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988759523547,"sku":"S-D-351391-1","price":25.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4807_b188c5c7-66e1-4e9c-a04a-ab269f4607b9.jpg?v=1784428957"},{"product_id":"sea-dog-351399-1-deck-fill-key-investment-cast-316-stainless-steel-fits-1-3-16-on-center-fill-caps","title":"Sea-Dog Deck Fill Key 351399-1, 316 Stainless Steel, Fits 351320-351331 and 351350-351353 Deck Fill Caps","description":"\u003cp\u003eThe Sea-Dog Deck Fill Key (351399-1) is a 1-3\/16 inch stainless steel key designed to open and close Sea-Dog cast stainless steel deck fill caps. It is machined from investment cast 316 stainless steel, giving it strong resistance to the saltwater, fuel, and weather exposure that deck hardware faces on a daily basis. The key engages the slotted openings on compatible deck fill caps, which are used to access fuel, water, and waste fill points on a boat.\u003c\/p\u003e\u003cp\u003eThis key is sized to fit Sea-Dog cast stainless steel deck fill caps with holes on 1-3\/16 inch centers, specifically the 351320-351331 and 351350-351353 series. Keeping a dedicated key on board (or a spare in the tool locker) makes it easy to open a fill cap when the built-in key feature on some caps is worn, missing, or hard to grip with wet hands. Because it is a separate accessory rather than part of the cap assembly, it can be replaced on its own without buying a new fill cap.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351399-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Deck Fill Key\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 1-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.054 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514351034\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits Sea-Dog cast stainless steel deck fill caps 351320-351331 and 351350-351353\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits Sea-Dog cast stainless steel deck fill caps with 1-3\/16 inch hole centers, series 351320-351331 and 351350-351353\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 351399-1 deck fill key used for?\u003c\/strong\u003e It opens and closes Sea-Dog cast stainless steel deck fill caps by engaging the slotted opening on the cap, giving you a dedicated tool for accessing fuel, water, or waste fill points on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich deck fill caps does the 351399-1 key fit?\u003c\/strong\u003e This key fits Sea-Dog cast stainless steel deck fill caps with 1-3\/16 inch hole centers, covering the 351320-351331 and 351350-351353 series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the deck fill key made from?\u003c\/strong\u003e The 351399-1 key is machined from investment cast 316 stainless steel, chosen for its resistance to corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the deck fill key?\u003c\/strong\u003e The Sea-Dog 351399-1 measures 1-3\/16 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the deck fill key weigh?\u003c\/strong\u003e It weighs 0.054 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this key come with a fill cap?\u003c\/strong\u003e No, the 351399-1 is sold as a standalone key. It is intended to open and close compatible Sea-Dog deck fill caps that are purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this key be used as a spare or backup?\u003c\/strong\u003e Yes, many boat owners keep a spare 351399-1 key on board or in a tool locker in case the primary key is lost or a cap's built-in grip feature is worn.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 351399-1 key resistant to saltwater corrosion?\u003c\/strong\u003e Yes, because it is made of investment cast 316 stainless steel, a grade widely used in marine hardware for its resistance to saltwater corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this key fit fill caps from other brands?\u003c\/strong\u003e The 351399-1 is confirmed to fit Sea-Dog cast stainless steel deck fill caps in the 351320-351331 and 351350-351353 series; fitment with other brands is not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a non-metal alternative to this stainless key?\u003c\/strong\u003e Sea-Dog also offers a nylon deck fill key (357399-1) as an alternative to the stainless steel 351399-1 for buyers who prefer a non-metal option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the product's UPC code?\u003c\/strong\u003e The Sea-Dog 351399-1 deck fill key has UPC 035514351034.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many keys come in a package?\u003c\/strong\u003e The 351399-1 is packaged as a single key (package quantity of 1).\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988761030875,"sku":"S-D-351399-1","price":4.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4812.jpg?v=1784428960"},{"product_id":"sea-dog-351390-1-replacement-deck-fill-cap-with-chain-for-1-1-2-hose-deck-fills-investment-cast-316-stainless-steel","title":"Sea-Dog 351390-1 Replacement Cap for 1-1\/2 Inch Angled Hose Deck Fills 351520-351523","description":"\u003cp\u003eThe Sea-Dog 351390-1 is a genuine replacement cap for Sea-Dog's 1-1\/2 inch angled hose deck fills, part numbers 351520-351523. If the original cap on a gas or diesel deck fill is lost, damaged, or worn out, this cap restores the fitting to like-new function without replacing the entire deck fill assembly.\u003c\/p\u003e\u003cp\u003eThe cap uses a slotted design that requires a deck fill key to open and close, adding a layer of security against tampering or unauthorized access to the fuel or water fill. It is constructed of investment cast 316 stainless steel for corrosion resistance in a marine environment, matching the material used across the deck fill line it belongs to. The cap measures 1-7\/8 inches in diameter with an 11-1\/2 NPSM straight thread pitch, matching the threads on the 351520-351523 deck fill bodies.\u003c\/p\u003e\u003cp\u003eAn attachment cable (0P35105) is included with the cap so it stays tethered to the deck fill and cannot be dropped or lost overboard during use. A flange gasket for 1-1\/2 inch deck fills (351349) is sold separately and is not included with this cap. The 351390-1 weighs 0.22 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351390-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Deck Fill Models:\u003c\/strong\u003e 351520-351523\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment cast 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment Cable:\u003c\/strong\u003e Included (0P35105)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket:\u003c\/strong\u003e Sold separately (351349)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.22 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514351010\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSea-Dog 1-1\/2 inch angled hose deck fills, part numbers 351520-351523\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo cross-reference numbers listed\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat deck fills does the Sea-Dog 351390-1 cap fit?\u003c\/strong\u003e The 351390-1 is a replacement cap for Sea-Dog's 1-1\/2 inch angled hose deck fills, part numbers 351520-351523.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a key to open this deck fill cap?\u003c\/strong\u003e Yes, the 351390-1 uses a slotted cap design that requires a deck fill key to open and close, which adds security against unauthorized access.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 351390-1 cap made of?\u003c\/strong\u003e It is constructed of investment cast 316 stainless steel, matching the material used across Sea-Dog's angled hose deck fill line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size and thread does the cap use?\u003c\/strong\u003e The 351390-1 cap has a diameter of 1-7\/8 inches with an 11-1\/2 NPSM straight thread pitch, matching the 351520-351523 deck fill bodies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the replacement cap come with an attachment cable?\u003c\/strong\u003e Yes, the 351390-1 includes attachment cable 0P35105 so the cap stays tethered to the deck fill and cannot be dropped or lost.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the gasket included with the 351390-1 cap?\u003c\/strong\u003e No, the flange gasket for 1-1\/2 inch deck fills (part number 351349) is sold separately and is not included with the 351390-1 cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 351390-1 replacement cap weigh?\u003c\/strong\u003e The Sea-Dog 351390-1 cap weighs 0.22 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 351390-1 and 351391-1 caps?\u003c\/strong\u003e The 351390-1 is a replacement cap for the 1-1\/2 inch deck fills (351520-351523), while the 351391-1 is a replacement cap for the 2 inch deck fills (351620-351621).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 351390-1 cap fit both gas and diesel deck fills?\u003c\/strong\u003e The 351390-1 fits the 1-1\/2 inch deck fill bodies (351520-351523) regardless of the fuel type marking on the fill, since it is sized to the 1-7\/8 inch cap diameter and 11-1\/2 NPSM thread shared by that series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cap need a bonding wire?\u003c\/strong\u003e USCG regulations require a bonding wire on deck fill installations to prevent sparking; this applies to the deck fill assembly the 351390-1 cap is installed on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 351390-1 cap sold with the deck fill hardware or fasteners?\u003c\/strong\u003e No, the 351390-1 is the replacement cap only; the deck fill assembly installs with three #10 flat head fasteners, which are not included with the cap.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988761325787,"sku":"S-D-351390-1","price":21.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7144_5eefc388-ed4a-4c1f-9e26-7d43e0dd0736.jpg?v=1784428966"},{"product_id":"sea-dog-351755-1-replacement-deck-fill-cap-for-351750-351750-1-gas-deck-fills-chrome-plated-die-cast-zinc-keyless-tab-cap-fits-1-1-2-hose","title":"Sea-Dog Replacement Cap 351755-1 for 351750 and 351750-1 Gas Deck Fills, Keyless Chrome Plated Die Cast Zinc","description":"\u003cp\u003eThe Sea-Dog 351755-1 is a replacement cap engineered specifically for the Sea-Dog 351750 and 351750-1 gas deck fills. It restores keyless operation to a worn or damaged deck fill without requiring replacement of the entire fitting. The cap uses easy-to-use tabs for keyless operation, so no deck plate key is needed to open or close it dockside or at the fuel pump.\u003c\/p\u003e\u003cp\u003eConstructed of chrome plated die cast zinc, the cap measures 1-11\/16 inches in diameter with a 12 SAE thread pitch to match the threading on the 351750 and 351750-1 deck fill bodies. An attachment chain is included, keeping the cap tethered to the deck fill body so it cannot be dropped or lost overboard during fueling. Installation is a simple thread-on replacement of the original cap, letting the rest of the deck fill assembly remain in place.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351755-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Deck Fill Replacement Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chrome Plated Die Cast Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 12 SAE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Keyless, tab-style (no deck plate key required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Attachment chain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Sea-Dog 351750 and 351750-1 Gas Deck Fills\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.124 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514351089\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSea-Dog 351750 Gas Deck Fill\u003c\/li\u003e\n\u003cli\u003eSea-Dog 351750-1 Gas Deck Fill\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNot applicable - this is the factory replacement cap for the Sea-Dog 351750 and 351750-1 deck fills, not a cross-brand OEM equivalent\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 351755-1 cap compatible with?\u003c\/strong\u003e The Sea-Dog 351755-1 is a replacement cap made specifically to fit the Sea-Dog 351750 and 351750-1 gas deck fills; it is not a universal deck fill cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a deck plate key to operate this cap?\u003c\/strong\u003e No. The 351755-1 cap uses easy-to-use tabs for keyless operation, so it opens and closes without a deck plate key.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 351755-1 cap made of?\u003c\/strong\u003e It is constructed of chrome plated die cast zinc, matching the finish and durability of the original Sea-Dog 351750 deck fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the thread pitch on this cap?\u003c\/strong\u003e The Sea-Dog 351755-1 has a 12 SAE thread pitch, matching the threading on the 351750 and 351750-1 deck fill bodies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the diameter of the cap?\u003c\/strong\u003e The cap diameter is 1-11\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cap come with a way to keep it attached to the boat?\u003c\/strong\u003e Yes, the 351755-1 includes an attachment chain so the cap stays tethered to the deck fill body and cannot be dropped or lost during fueling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the replacement cap weigh?\u003c\/strong\u003e The Sea-Dog 351755-1 replacement cap weighs 0.124 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cap replace a lost or damaged deck fill cap without buying a new deck fill?\u003c\/strong\u003e Yes, the 351755-1 is sold specifically as a replacement cap so you can restore a Sea-Dog 351750 or 351750-1 deck fill without replacing the entire fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 351755-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, it is a genuine Sea-Dog replacement cap, made to match the fit, thread pitch, and finish of the original cap on the 351750 and 351750-1 deck fills.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 351755-1?\u003c\/strong\u003e The package includes the chrome plated die cast zinc cap and its attachment chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cap only for gas deck fills, or does it fit water or waste fills too?\u003c\/strong\u003e The 351755-1 is made to fit the 351750 and 351750-1 gas deck fills specifically.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988762439899,"sku":"S-D-351755-1","price":7.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7590.jpg?v=1784428969"},{"product_id":"sea-dog-351393-1-replacement-deck-fill-cap-316-stainless-steel-keyless-tab-design-fits-351340-1-1-2-in-hose-deck-fill","title":"Sea-Dog Replacement Cap 351393-1 for 351340 Gas Deck Fill, 316 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog 351393-1 is a replacement cap for the Sea-Dog 351340 gas hose deck fill. It is investment cast from corrosion-resistant 316 stainless steel, giving it long-term durability against saltwater exposure on deck. The cap operates without a deck plate key: easy-to-use tabs allow key-less opening and closing, and a cap attachment chain keeps the cap tethered to the deck fill body so it cannot be misplaced when open. The cap measures 1-11\/16 inches in diameter with a 12 SAE thread pitch, matching the threaded neck of the 351340 deck fill. This is a cap-only replacement part; it does not include the deck fill body, mounting fasteners, or the flange gasket, which is sold separately as Sea-Dog part 351349. It ships at 0.236 pounds. Use this part to restore a worn, lost, or damaged cap on an existing 351340 installation without replacing the entire deck fill assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351393-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Replacement Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 12 SAE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Key-less, tab-operated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Attachment:\u003c\/strong\u003e Attachment chain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 4.44 x 2.69 x 1.69 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.236 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514351539\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits the Sea-Dog 351340 gas hose deck fill (1-1\/2 inch hose, 3 inch bulk display size)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sea-Dog 351393-1 replacement cap fit?\u003c\/strong\u003e The 351393-1 is a replacement cap for the Sea-Dog 351340 gas hose deck fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cap made of?\u003c\/strong\u003e It is investment cast from 316 stainless steel for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a deck plate key to open this cap?\u003c\/strong\u003e No. The 351393-1 cap uses easy-to-use tabs for key-less operation, so no deck plate key is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the diameter of this deck fill cap?\u003c\/strong\u003e The Sea-Dog 351393-1 cap has a diameter of 1-11\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread pitch does the cap use?\u003c\/strong\u003e The 351393-1 cap uses a 12 SAE thread pitch to match the 351340 deck fill's threaded neck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 351393-1 cap weigh?\u003c\/strong\u003e It weighs 0.236 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the gasket included with this cap?\u003c\/strong\u003e No. The flange gasket is sold separately as Sea-Dog part 351349 and is not included with the 351393-1 replacement cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cap stay attached to the deck fill when open?\u003c\/strong\u003e Yes, the 351393-1 includes a cap attachment chain that keeps the cap tethered to the deck fill body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of this part?\u003c\/strong\u003e The Sea-Dog 351393-1 measures 4.44 x 2.69 x 1.69 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog part?\u003c\/strong\u003e Yes, 351393-1 is the Sea-Dog manufacturer part number for this replacement cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace the whole deck fill if just the cap is worn?\u003c\/strong\u003e No, the Sea-Dog 351393-1 lets you replace just the cap on an existing 351340 gas deck fill without replacing the full assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The UPC for the Sea-Dog 351393-1 replacement cap is 035514351539.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988763848923,"sku":"S-D-351393-1","price":18.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7591.jpg?v=1784428975"},{"product_id":"sea-dog-357093-1-keyless-replacement-cap-blue-water-nylon-for-1-1-2-hose-deck-fills","title":"Sea-Dog Blue Water Deck Fill Replacement Cap 357093-1, Keyless Design","description":"\u003cp\u003eThe Sea-Dog 357093-1 is a blue replacement cap for water deck fills, designed to thread directly onto Sea-Dog hose deck fill bodies. The cap uses a built-in key for removal instead of a separate loose key, so there is nothing extra to lose overboard. The key can be locked in the upright position for quick opening and closing, or recessed into the cap for a flush surface on deck.\u003c\/p\u003e\u003cp\u003eThe cap is color-coded blue to identify water service, matching Sea-Dog's color system across gas (red), diesel (green), oil (black), and waste (black) caps. This color coding helps prevent the wrong fluid from being added to the wrong fill, which can cause costly contamination problems. The cap includes an attachment chain to keep it tethered to the deck fill body when open.\u003c\/p\u003e\u003cp\u003eConstruction is fiberglass filled injection molded nylon, so the cap contains no metal and does not require grounding to the boat's electrical system. The cap has a 1-7\/8 inch diameter and a straight 11-1\/2 NPSM thread pitch to match Sea-Dog hose deck fills. It connects to the boat's water reservoir through the deck fill body via hose (hose not included).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 357093-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue (Water)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Deck Fill Replacement Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fiberglass filled injection molded nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Type:\u003c\/strong\u003e Built-in, keyless removal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.096 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514357067\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Sea-Dog hose deck fills with 1-7\/8 inch, 11-1\/2 NPSM straight thread caps.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the color blue mean on this Sea-Dog deck fill cap?\u003c\/strong\u003e Blue indicates water service on Sea-Dog deck fill caps, part of a color-coded system that also uses red for gas, green for diesel, and black for oil and waste, so the 357093-1 cap should only be used on a water fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 357093-1 cap need a separate key to open?\u003c\/strong\u003e No, the 357093-1 has a built-in key that can be locked in the upright position for opening and closing or recessed into the cap for a flush deck surface, so there is no loose key to carry or lose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size thread does this replacement cap use?\u003c\/strong\u003e The Sea-Dog 357093-1 cap has a 1-7\/8 inch diameter and a straight 11-1\/2 NPSM thread pitch, matching Sea-Dog hose deck fill bodies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a chain included with the cap?\u003c\/strong\u003e Yes, the 357093-1 blue water cap includes an attachment chain to keep the cap tethered to the deck fill body when it is open.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the cap made from?\u003c\/strong\u003e The 357093-1 is made of fiberglass filled injection molded nylon, so it contains no metal and does not require grounding to the boat's electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 357093-1 cap weigh?\u003c\/strong\u003e The blue water replacement cap weighs 0.096 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cap work with a pressurized fuel or oil injection system?\u003c\/strong\u003e The 357093-1 is intended for water deck fills; consult Sea-Dog's fitment guidance for oil injection compatibility before use on a fuel or oil system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cap be used on a diesel or gas deck fill instead of water?\u003c\/strong\u003e The 357093-1 is color-coded blue specifically for water; for diesel or gas fills, Sea-Dog offers separate green and red replacement caps under different part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the deck fill cap connect to the water tank?\u003c\/strong\u003e The deck fill body connects to the boat's water reservoir through a hose, which is not included with the 357093-1 replacement cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with part 357093-1?\u003c\/strong\u003e The package includes the blue water replacement cap with its built-in key and attachment chain; the deck fill body and mounting hardware are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 357093-1 an OEM Sea-Dog part?\u003c\/strong\u003e Yes, 357093-1 is the genuine Sea-Dog manufacturer part number for the blue water replacement cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cap sit flush with the deck?\u003c\/strong\u003e Yes, the built-in key on the 357093-1 can be recessed into the cap so it sits flush with the deck surface when not in use.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988763881691,"sku":"S-D-357093-1","price":13.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4803_807148d7-15f2-4507-aadc-a787dfa23042.jpg?v=1784439612"},{"product_id":"sea-dog-357094-1-waste-deck-fill-replacement-cap-black-1-7-8in-11-1-2-npsm-for-1-1-2in-hose-deck-fills","title":"Sea-Dog Black Waste Deck Fill Replacement Cap, Keyless, Part 357094-1","description":"\u003cp\u003eThe Sea-Dog 357094-1 is a black replacement cap for waste deck fills, designed to restore a secure, color-coded seal after the original cap is lost, cracked, or worn out. It is molded entirely from fiberglass filled injection molded nylon, so it contains no metal and never requires grounding to the boat's electrical system, eliminating corrosion concerns common with metal deck fill caps.\u003c\/p\u003e\u003cp\u003eThe cap features a built-in key for easy removal and installation. The key can be locked in the upright position for quick opening and closing, or recessed into the cap for a flush surface when not in use. The cap measures 1-7\/8 inches in diameter with an 11-1\/2 NPSM straight thread pitch, matching Sea-Dog waste deck fill bodies. Black is the designated color for waste system deck fills, keeping tank fittings clearly identifiable and helping prevent misidentification and cross-contamination between waste, water, fuel, and gas fill points.\u003c\/p\u003e\u003cp\u003eThis is a cap-only replacement part; it does not include the deck fill body, mounting fasteners, or an attachment chain (chains are included with gas, diesel, and water replacement caps, but not with the waste cap). It is compatible with Sea-Dog hose deck fills and will not work with pressurized oil injection systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 357094-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Waste Deck Fill Replacement Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fiberglass filled injection molded nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment Chain Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Removal:\u003c\/strong\u003e Built-in key, locks upright or recesses flush\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514357074\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Sea-Dog waste hose deck fills using a 1-7\/8 inch diameter, 11-1\/2 NPSM straight thread cap opening. Will not work with pressurized oil injection systems.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 357094-1 cap fit?\u003c\/strong\u003e The Sea-Dog 357094-1 is a replacement cap sized for Sea-Dog waste hose deck fills, with a 1-7\/8 inch diameter and 11-1\/2 NPSM straight thread that matches the deck fill body opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is this cap black?\u003c\/strong\u003e Black is the designated color for waste system deck fills in the Sea-Dog lineup, while red marks gas, green marks diesel, and blue marks water, so the color coding on the 357094-1 helps prevent misidentifying which tank a fitting connects to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 357094-1 cap include an attachment chain?\u003c\/strong\u003e No, the waste replacement cap does not include an attachment chain. Sea-Dog includes attachment chains with the gas, diesel, and water replacement caps, but the waste cap is supplied without one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 357094-1 cap made from?\u003c\/strong\u003e It is molded entirely from fiberglass filled injection molded nylon, so the cap contains no metal and does not require grounding to the boat's electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you open and close the cap?\u003c\/strong\u003e The 357094-1 has a built-in key for easy removal: lock the key in the upright position for quick opening and closing, or recess it into the cap for a flush surface when it is not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cap include the deck fill body?\u003c\/strong\u003e No, the 357094-1 is a cap-only replacement part. The deck fill body itself is a separate part, and mounting fasteners are not included with either.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the thread size on the 357094-1 waste cap?\u003c\/strong\u003e The cap uses an 11-1\/2 NPSM straight thread with a 1-7\/8 inch cap diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cap be used with a pressurized oil injection system?\u003c\/strong\u003e No, Sea-Dog states that these deck fill caps will not work with pressurized oil injection systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 357094-1 cap weigh?\u003c\/strong\u003e The Sea-Dog waste replacement cap weighs 0.09 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 357094-1 an OEM Sea-Dog part or an aftermarket copy?\u003c\/strong\u003e It is a genuine Sea-Dog replacement cap, part number 357094-1, manufactured to match Sea-Dog's own waste deck fill bodies.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988763914459,"sku":"S-D-357094-1","price":13.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4803_8fadd2b9-9ffc-4af5-89d8-06a481453869.jpg?v=1784439614"},{"product_id":"sea-dog-357100-1-gas-tank-vent-black-nylon-marine-fuel-tank-vent-with-5-8-inch-hose-barb","title":"Sea-Dog Gas Tank Vent, Black Injection Molded Nylon, 5\/8 Inch Hose Barb - 357100-1","description":"\u003cp\u003eThe Sea-Dog Gas Tank Vent (357100-1) provides the airflow needed to maintain proper fuel flow while filling and during use. As fuel is consumed and tank levels drop, or as temperature changes cause the fuel and air inside the tank to expand and contract, this vent compensates for those changes so the fuel system stays balanced. It is designed to prevent vacuum build-up during use, which can otherwise disrupt fuel delivery, and it also functions as a pressure release valve for the gas tank. By managing this airflow, the vent helps prevent fuel spills and blow-back, and it ensures fuel fumes vent outboard instead of building up inside the boat.\u003c\/p\u003e\u003cp\u003eAn integral 5\/8 inch hose barb allows the vent to connect securely to vent hose without additional adapters, making it a straightforward fit for standard marine fuel vent lines. The vent is constructed of UV resistant injection molded nylon, so it holds up to sun and weather exposure in a marine environment without becoming brittle over time. It is finished in black. This is a small, lightweight fitting sized for compact vent line installations on boats and portable fuel systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 357100-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Gas Tank Vent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 2-1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Barb Size:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514357012\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sea-Dog 357100-1 gas tank vent do?\u003c\/strong\u003e It lets air flow into and out of a gas tank as fuel is consumed and as temperature changes cause expansion and contraction, keeping fuel flow steady and preventing vacuum build-up that can disrupt delivery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this vent also relieve pressure in the tank?\u003c\/strong\u003e Yes, the 357100-1 vent doubles as a pressure release valve for the gas tank in addition to supplying air during filling and use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the 357100-1 vent fit?\u003c\/strong\u003e It has an integral 5\/8 inch hose barb that connects securely to 5\/8 inch vent hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog gas tank vent made of?\u003c\/strong\u003e The 357100-1 is constructed of UV resistant injection molded nylon, which holds up to sun and weather exposure in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 357100-1?\u003c\/strong\u003e The 357100-1 is black. Sea-Dog also makes this same vent in white under part number 357105-1 for buyers who need a white fitting instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the gas tank vent weigh?\u003c\/strong\u003e The Sea-Dog 357100-1 gas tank vent weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 357100-1 vent?\u003c\/strong\u003e The vent measures 1 inch (A) by 2-1\/8 inch (B) by 1-1\/8 inch (D), with a 5\/8 inch hose barb (C) for the hose connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this vent stop fuel spills and fumes from entering the boat?\u003c\/strong\u003e The 357100-1 is designed to help prevent fuel spills and blow-back and to vent fumes outboard instead of into the boat interior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 357100-1 vent a universal fit?\u003c\/strong\u003e Yes, it is a universal-fit gas tank vent that connects via its 5\/8 inch hose barb rather than being designed for one specific tank or engine model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this vent be used on a portable fuel tank?\u003c\/strong\u003e The 357100-1 gas tank vent is suited for standard vent line installations, including those used with portable and built-in gas tanks that use 5\/8 inch vent hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 357100-1 genuine Sea-Dog, not an aftermarket copy?\u003c\/strong\u003e Yes, part number 357100-1 is a genuine Sea-Dog gas tank vent, sold under the Sea-Dog brand name.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988764012763,"sku":"S-D-357100-1","price":4.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4836.jpg?v=1784428990"},{"product_id":"sea-dog-357090-1-red-gas-keyless-replacement-cap-for-1-1-2-hose-deck-fill","title":"Sea-Dog Red Gas Deck Fill Replacement Cap 357090-1","description":"\u003cp\u003eThe Sea-Dog 357090-1 is a red replacement cap for gas hose deck fills, designed to restore a secure, easy-to-open seal on your boat's gas fill fitting. The cap features a built-in key for effortless removal - lock the key in the upright position for quick access, or recess it into the cap for a flush surface when closed. The cap diameter is 1-7\/8 inches, with an 11-1\/2 NPSM straight thread pitch, matching Sea-Dog's hose deck fill fittings.\u003c\/p\u003e\u003cp\u003eColor-coding is a core safety feature of this cap: the red finish clearly marks the fitting as gas, helping prevent dangerous and costly misfueling that can occur when fill points are not clearly identified. The cap is constructed of fiberglass filled injection molded nylon, so it contains no metal and does not require grounding to the boat's electrical system. It includes an attachment chain to keep the cap tethered to the deck fill body during use. This is a cap-only replacement part; the deck fill body and hose are sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 357090-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Deck Fill Replacement Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFill Type:\u003c\/strong\u003e Gas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fiberglass filled injection molded nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.096 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514357043\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment Chain:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding Required:\u003c\/strong\u003e No (contains no metal)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Sea-Dog hose deck fills using an 11-1\/2 NPSM straight thread with a 1-7\/8 inch cap diameter, gas fill applications.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 357090-1 used for?\u003c\/strong\u003e It is a replacement cap for a gas hose deck fill, sealing the gas fill fitting on a boat's deck and allowing quick access via its built-in key.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is this cap red?\u003c\/strong\u003e Red identifies the fitting as gas on Sea-Dog's color-coded deck fill system, which helps prevent misfueling and the damage that can result from filling the wrong tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 357090-1 cap include the deck fill body?\u003c\/strong\u003e No, 357090-1 is the cap only. Sea-Dog sells the deck fill body separately, so this part is for replacing a lost or damaged gas cap on an existing fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does this cap use?\u003c\/strong\u003e The 357090-1 cap has a 1-7\/8 inch cap diameter with an 11-1\/2 NPSM straight thread pitch, matching Sea-Dog hose deck fill fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the cap made from?\u003c\/strong\u003e It is constructed of fiberglass filled injection molded nylon, a rigid, corrosion-resistant material that does not require electrical grounding since it contains no metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the gas cap include an attachment chain?\u003c\/strong\u003e Yes, the 357090-1 gas replacement cap includes an attachment chain to keep it tethered to the deck fill body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 357090-1 cap weigh?\u003c\/strong\u003e The cap weighs 0.096 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I remove the cap?\u003c\/strong\u003e The 357090-1 cap has a built-in key: lift and lock the key upright to turn and remove the cap, or press it flush into the cap's surface once the cap is closed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cap compatible with pressurized oil injection systems?\u003c\/strong\u003e No. Sea-Dog deck fill caps and fittings, including 357090-1, are not designed to work with pressurized oil injection systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Sea-Dog 357090-1 red gas replacement cap has UPC 035514357043.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from the oil, diesel, water, or waste caps?\u003c\/strong\u003e The 357090-1 is the red gas version; Sea-Dog also makes black oil, green diesel, blue water, and black waste replacement caps in the same style, distinguished by color for fill identification.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988764274907,"sku":"S-D-357090-1","price":13.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4803_285d83e3-8251-4c6d-9228-175eb33459c5.jpg?v=1784439615"},{"product_id":"attwood-1607-3-straight-marine-fuel-tank-vent-5-8-i-d-hose-black-polypropylene","title":"Attwood 1607-3 Straight Fuel Tank Vent, White, 5\/8 Inch I.D. Hose, 3\/4-7\/8 Inch Mounting Hole","description":"\u003cp\u003eThe Attwood 1607-3 is a straight-style marine fuel tank vent designed to let air escape from the fuel tank during fueling and normal operation, preventing pressure buildup, fuel splash-back, and vapor lock. It connects to a 5\/8 inch I.D. Vent hose and mounts through the hull using a 3\/4 inch to 7\/8 inch hole, making it a straightforward fit for both new fuel system installations and replacement of a worn or cracked vent fitting.\u003c\/p\u003e\u003cp\u003eBuilt in White polypropylene, the 1607-3 resists corrosion, UV exposure, and the harsh conditions of continuous seawater and weather exposure, so it holds up to long-term deck or hull mounting without degrading. Its low-profile straight design keeps the exterior finish clean while providing reliable, unobstructed airflow to the fuel tank. As an integrated fuel system component, it is intended to work as part of a properly vented fuel tank setup on recreational boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1607-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Straight Fuel Tank Vent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Connection Size:\u003c\/strong\u003e 5\/8 inch I.D.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 3\/4 inch to 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4.5 x 4.5 x 9.2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1667 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697160737\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for boats using a 5\/8 inch I.D. Fuel vent hose and a 3\/4 inch to 7\/8 inch mounting hole; not limited to a specific make or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the Attwood 1607-3 fit?\u003c\/strong\u003e The 1607-3 connects to a 5\/8 inch I.D. Fuel vent hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole do I need to install this vent?\u003c\/strong\u003e A 3\/4 inch to 7\/8 inch mounting hole is required to install the Attwood 1607-3 fuel tank vent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 1607-3 fuel vent?\u003c\/strong\u003e The Attwood 1607-3 is White.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this vent a straight or angled design?\u003c\/strong\u003e The 1607-3 is a straight-style fuel tank vent, giving a clean, low-profile exterior finish once mounted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the vent made from?\u003c\/strong\u003e It is made from polypropylene, chosen for its resistance to corrosion and prolonged seawater and weather exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this vent used for?\u003c\/strong\u003e The Attwood 1607-3 allows air to escape from a boat's fuel tank during fueling and operation, helping prevent pressure buildup, fuel splash-back, and vapor lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this vent work as a replacement for an old or cracked fuel vent?\u003c\/strong\u003e Yes, the 1607-3 is suited to replacing a worn or cracked fuel tank vent as long as the existing hose is 5\/8 inch I.D. And the mounting hole is 3\/4 inch to 7\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 1607-3?\u003c\/strong\u003e The Attwood 1607-3 measures 4.5 x 4.5 x 9.2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the fuel tank vent weigh?\u003c\/strong\u003e The Attwood 1607-3 weighs 0.1667 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this vent fit a specific boat make or model?\u003c\/strong\u003e The 1607-3 is a universal fuel tank vent fitting any boat with a 5\/8 inch I.D. Vent hose and a 3\/4 inch to 7\/8 inch mounting hole, rather than being limited to one make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type is used on the 1607-3?\u003c\/strong\u003e The Attwood 1607-3 uses NPT thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 1607-3 sold as a single unit?\u003c\/strong\u003e Yes, the 1607-3 fuel tank vent is sold as one piece.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989666803931,"sku":"ATT-1607-3","price":9.81,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-1607-3_lg__91394.1558112694.500.750.jpg?v=1785188279"},{"product_id":"attwood-1670-3-90-degree-p-trap-fuel-tank-vent-black-standard-mount-for-5-8-i-d-hose","title":"Attwood P-Trap 90 Degree Fuel Tank Vent, Black, Standard Mount for 5\/8 Inch Hose - 1670-3","description":"\u003cp\u003eThe Attwood 1670-3 is a 90 degree P-Trap fuel tank vent built to keep water out of the fuel tank while still letting the tank breathe. The trapped-water design in the P-shaped body helps stop water from entering the fuel system during washdowns and normal sea conditions, while the vent continues to allow air to move freely in and out of the tank as fuel is used or added. Because the P-Trap design manages water intrusion at the vent itself, it eliminates the need to run a separate anti-siphon loop in the vent hose, simplifying the plumbing run between the tank and the hull fitting.\u003c\/p\u003e\u003cp\u003eThis is a standard mount vent with a black vent head, sized for use with a 5\/8 inch interior diameter hose. It requires a 3\/4 inch installation hole through the hull or transom and is rated for hulls with a maximum thickness of 9\/16 inch. The vent body is molded from durable plastic for corrosion resistance in the marine environment, and its universal fit type makes it suitable for a wide range of boats using a standard fuel tank vent setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1670-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Standard Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Compatibility:\u003c\/strong\u003e 5\/8 inch interior diameter hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Hole Diameter:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Hull Thickness:\u003c\/strong\u003e 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5 x 9 x 10.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.215 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697167033\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for boats using a standard 5\/8 inch ID fuel vent hose; no specific make, engine, or year restrictions are listed for this vent.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for the Attwood 1670-3.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Attwood 1670-3 fuel tank vent do?\u003c\/strong\u003e The Attwood 1670-3 is a 90 degree P-Trap fuel tank vent that helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1670-3 vent require an anti-siphon loop?\u003c\/strong\u003e No. The P-Trap design of the Attwood 1670-3 eliminates the need for a separate anti-siphon loop in the vent hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does this vent use?\u003c\/strong\u003e The Attwood 1670-3 is designed for use with a 5\/8 inch interior diameter hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size installation hole is needed?\u003c\/strong\u003e Mounting the Attwood 1670-3 requires a 3\/4 inch installation hole through the hull or transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a maximum hull thickness for this vent?\u003c\/strong\u003e Yes, the Attwood 1670-3 is rated for a maximum hull thickness of 9\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 1670-3 vent head?\u003c\/strong\u003e The Attwood 1670-3 has a black vent head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a standard mount or angled mount vent?\u003c\/strong\u003e The Attwood 1670-3 is a standard mount fuel tank vent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 1670-3 made from?\u003c\/strong\u003e It is made from durable plastic suited to the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Attwood 1670-3 fit any boat?\u003c\/strong\u003e The 1670-3 has a universal fit type and is intended for boats using a standard 5\/8 inch ID fuel vent hose setup; no specific make or model restrictions are listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuel type is the 1670-3 vent rated for?\u003c\/strong\u003e The Attwood 1670-3 is rated for use with gasoline fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 1670-3 fuel vent?\u003c\/strong\u003e The Attwood 1670-3 measures 5 x 9 x 10.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 1670-3 weigh?\u003c\/strong\u003e The Attwood 1670-3 weighs 0.215 pounds.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989666836699,"sku":"ATT-1670-3","price":15.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-1670-3_lg__54744.1558112778.500.750.jpg?v=1785189136"},{"product_id":"attwood-66074-3-deck-fill-replacement-cap-and-chain-316-stainless-steel-fits-66126-deck-fill","title":"Attwood 66074-3 Replacement Deck Fill Cap and Chain, Fits Attwood 66126","description":"\u003cp\u003eThe Attwood 66074-3 is a replacement cap and chain designed specifically to fit Attwood deck fill 66126. If the original cap on your 66126 deck fill has been lost, cracked, or worn out, this part restores a secure, watertight closure without requiring you to replace the entire deck fill assembly.\u003c\/p\u003e\u003cp\u003eThe cap is machined from enhanced 316 stainless steel alloy and finished with a high-polish surface for a clean, corrosion-resistant appearance on deck hardware. The flush cap is slotted so it can be opened and closed with a separate key (key sold separately), and it features an O-ring that seals the cap watertight when secured. The cap attaches to the deck fill body with an included stainless steel beaded chain, so it stays with the boat and cannot be misplaced during fueling or servicing.\u003c\/p\u003e\u003cp\u003eThis is a direct replacement part, not a full deck fill kit -- it includes only the cap and chain. It is intended for use on the Attwood 66126 deck fill.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 66074-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Attwood deck fill 66126\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Enhanced 316 stainless steel alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High-polish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Twist-on, slotted for separate key\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal:\u003c\/strong\u003e O-ring for watertight closure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment:\u003c\/strong\u003e Stainless steel beaded chain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey:\u003c\/strong\u003e Sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2388 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697660749\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAttwood deck fill 66126\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Attwood 66074-3 replacement cap fit?\u003c\/strong\u003e The Attwood 66074-3 is a replacement cap and chain made specifically for the Attwood deck fill 66126.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the key included with this cap?\u003c\/strong\u003e No, the key is sold separately from the Attwood 66074-3 cap and chain; the cap is slotted to accept a separate key.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 66074-3 cap made from?\u003c\/strong\u003e It is made from enhanced 316 stainless steel alloy with a high-polish finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cap stay attached to the deck fill?\u003c\/strong\u003e A stainless steel beaded chain connects the 66074-3 cap to the deck fill body so it cannot be lost.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 66074-3 cap seal watertight?\u003c\/strong\u003e Yes, an O-ring on the cap creates a watertight seal when the 66074-3 cap is closed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of closure does this cap use?\u003c\/strong\u003e The 66074-3 is a flush, twist-on cap that is slotted for opening and closing with a separate key.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 66074-3 weigh?\u003c\/strong\u003e The 66074-3 replacement cap and chain weighs 0.2388 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The UPC for the Attwood 66074-3 cap and chain is 022697660749.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this replace the entire deck fill or just the cap?\u003c\/strong\u003e The 66074-3 includes only the replacement cap and chain for the 66126 deck fill, not the full deck fill assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Attwood part?\u003c\/strong\u003e Yes, the 66074-3 is manufactured by Attwood as a direct replacement cap and chain for the 66126 deck fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the cap have?\u003c\/strong\u003e The 66074-3 has a high-polish stainless steel finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace just the cap and chain?\u003c\/strong\u003e If the original cap on an Attwood 66126 deck fill is lost, cracked, or no longer seals properly, the 66074-3 replaces just the cap and chain without needing a new deck fill.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989672734939,"sku":"ATT-66074-3","price":27.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-66074-3_lg_1__25476.1558110538.500.750.jpg?v=1785188487"},{"product_id":"attwood-66419-3-fuel-tank-vent-5-8-i-d-hose-90-degree-black-with-stainless-steel-trim-meets-abyc","title":"Attwood 66419-3 Composite 90 Degree Fuel Tank Vent, Standard Mount, 5\/8 Inch I.D. Hose, Black with Stainless Steel Trim Cover","description":"\u003cp\u003eThe Attwood 66419-3 is a 90 degree composite fuel tank vent fitting built for standard mount installation on 5\/8 inch I.D. Hose. It allows air to vent freely from the boat's fuel tank as it is filled and during normal sea conditions and washdowns, while helping prevent water from entering the tank. The 90 degree elbow design and standard mount base let the vent be routed through the hull or transom at the fitting's built-in angle, eliminating the need for an anti-siphon loop in the vent hose. The body is a splash-resistant, corrosion-resistant composite (plastic) construction finished in black, paired with a stainless steel trim cover on the vent head for a durable, marine-grade exterior finish. This vent connects to 5\/8 inch I.D. Hose and is intended for fuel systems using gasoline. It carries UPC 022697006448 for easy identification when ordering or cross-checking at the parts counter.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 66419-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Fuel Tank Vent Fitting, 90 Degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Standard Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Connection:\u003c\/strong\u003e 5\/8 inch I.D. Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Composite (plastic) body with stainless steel trim cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Black with stainless steel vent head cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9 x 5 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1833 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697006448\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Attwood 66419-3 fuel tank vent do?\u003c\/strong\u003e It vents air from the boat's fuel tank as the tank is filled and during normal sea conditions and washdowns, while helping prevent water from entering the fuel tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the 66419-3 fit?\u003c\/strong\u003e The Attwood 66419-3 connects to 5\/8 inch I.D. Hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a flush mount or standard mount vent?\u003c\/strong\u003e The 66419-3 is a standard mount fitting, not a flush mount design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle is the vent body?\u003c\/strong\u003e It is a 90 degree fitting, allowing the vent hose to be routed at a right angle from the mounting point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 66419-3 eliminate the need for an anti-siphon loop?\u003c\/strong\u003e Yes, using this vent eliminates the need for an anti-siphon loop in the vent hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the vent cover made of?\u003c\/strong\u003e The Attwood 66419-3 has a black composite body with a stainless steel trim cover on the vent head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 66419-3 weigh?\u003c\/strong\u003e It weighs 0.1833 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuel types is this vent rated for?\u003c\/strong\u003e The 66419-3 is intended for use with gasoline fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this vent work with diesel or only gasoline?\u003c\/strong\u003e The Attwood 66419-3 is specified for gasoline fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 66419-3?\u003c\/strong\u003e The listed item dimensions for the Attwood 66419-3 are 9 x 5 x 1.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 66419-3 corrosion resistant?\u003c\/strong\u003e Yes, it is a splash-resistant and corrosion-resistant composite fitting, suitable for marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 66419-3?\u003c\/strong\u003e The UPC for the Attwood 66419-3 fuel tank vent is 022697006448.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989672997083,"sku":"ATT-66419-3","price":14.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-66419-3_large__64347.1558177994.500.750.jpg?v=1785188835"},{"product_id":"attwood-911526-1-black-p-trap-fuel-tank-vent-cover-replacement-for-standard-mount-1670-marine-fuel-vents","title":"Attwood Black P-Trap Fuel Tank Vent Replacement Cover, Fits Vent 1670","description":"\u003cp\u003eThe Attwood 911526-1 is a replacement cover for standard mount P-trap fuel tank vents, designed as a direct fit for vent model 1670. It restores proper function to your boat's fuel tank ventilation system by letting air escape freely from the tank as you refuel, which prevents backpressure and the fuel spit-back that can happen when a vent is clogged, cracked, or missing its cover.\u003c\/p\u003e\u003cp\u003eBeyond simple airflow, the cover's P-trap design blocks water, sea spray, and washdown spray from entering the fuel tank, keeping contaminants out while the vent continues to breathe. Because the P-trap geometry already manages water intrusion, installing this cover lets you eliminate the bulky anti-siphon loop that standard mount vent lines typically require in the hose run, simplifying the installation.\u003c\/p\u003e\u003cp\u003eThe cover is molded in black plastic built to withstand the marine environment, resisting UV exposure, chemical contact, and saltwater spray over time. It is sized as a single replacement component, not a full vent assembly, so it is intended for boat owners replacing a worn, cracked, or missing cover on an existing standard mount P-trap vent rather than installing a new vent fitting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 911526-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Vent Model:\u003c\/strong\u003e 1670\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3 x 2.25 x 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAttwood standard mount P-trap fuel tank vent, model 1670\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Attwood 911526-1 fit?\u003c\/strong\u003e The Attwood 911526-1 is a replacement cover made for standard mount P-trap fuel tank vents, specifically vent model 1670.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cover stop water from entering the fuel tank?\u003c\/strong\u003e Yes, the 911526-1 cover uses a P-trap design that blocks water, sea spray, and washdown spray from entering the fuel tank while still allowing the tank to vent air freely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I still need an anti-siphon loop with this vent cover installed?\u003c\/strong\u003e No, the P-trap design of the Attwood 911526-1 is built to eliminate the need for a separate anti-siphon loop in the vent hose on a standard mount setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this vent cover made of?\u003c\/strong\u003e The 911526-1 is molded from black plastic that resists UV exposure, chemical contact, and saltwater spray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Attwood 911526-1 vent cover?\u003c\/strong\u003e It is black, matching Attwood's standard mount P-trap vent hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many covers come in one package?\u003c\/strong\u003e One Attwood 911526-1 vent cover is included per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 911526-1 a full vent fitting or just the cover?\u003c\/strong\u003e It is a replacement cover component for an existing standard mount P-trap vent (vent model 1670), not a complete new vent fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this vent cover?\u003c\/strong\u003e The Attwood 911526-1 measures 3 x 2.25 x 1.25 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 911526-1 vent cover weigh?\u003c\/strong\u003e It weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I replace my P-trap vent cover?\u003c\/strong\u003e A cracked, worn, or missing cover on a vent 1670 fuel tank vent can let water in or restrict airflow, so the 911526-1 restores the vent's water-blocking and free-venting function.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989676372187,"sku":"ATT-911526-1","price":6.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71xHbpT15UL.jpg?v=1784487187"},{"product_id":"moeller-marine-035740-10-chrome-deck-plate-fuel-fill-for-gasoline-1-1-2-in-id-fill-hose-screw-mount-with-splash-lip","title":"Moeller Marine Gasoline Deck Plate Fill 035740-10, Screw-Mount Fuel Deck Fill for 1-1\/2 Inch Hose","description":"\u003cp\u003eThe Moeller Marine Deck Plate Fill (035740-10) is a gasoline fuel deck fill designed to give boaters a secure, splash-resistant fill point on deck. It uses a screw-mount design with a splash lip to help keep water and debris out of the fuel fill opening, and it is built to work with 1 1\/2 inch ID fill hose, making it a straightforward fit for boats using that standard hose size. The unit is finished in chrome zinc plating for corrosion resistance in the marine environment.\u003c\/p\u003e\u003cp\u003eThis deck fill is intended for gasoline fuel systems only and is suited for use internationally as well as in boats built before 2011. Its compact deck footprint and screw-in mounting make it a practical choice for replacing a worn or damaged deck fill, or for outfitting a new fuel fill location during a build or repower.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035740-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Deck Plate Fill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFill Hose Size:\u003c\/strong\u003e 1 1\/2 inch ID\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Screw mount with splash lip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended Use:\u003c\/strong\u003e For use internationally and in boats built before 2011\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4 x 3.25 x 5.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729005996\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat fuel type is the Moeller Marine 035740-10 deck fill rated for?\u003c\/strong\u003e The 035740-10 deck plate fill is rated for gasoline fuel systems only, not diesel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fill hose does this deck fill work with?\u003c\/strong\u003e It is designed for use with 1 1\/2 inch ID fill hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 035740-10 deck fill mounted?\u003c\/strong\u003e It uses a screw-mount design with a splash lip to help keep water and debris out of the fill opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the deck fill made of and how is it finished?\u003c\/strong\u003e The 035740-10 is made of aluminum with a chrome zinc plated finish for corrosion resistance in marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this deck fill work on any boat?\u003c\/strong\u003e The Moeller Marine 035740-10 is intended for use internationally and in boats built before 2011.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 035740-10 deck fill?\u003c\/strong\u003e It measures 4 x 3.25 x 5.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 035740-10 deck fill weigh?\u003c\/strong\u003e The deck fill weighs 0.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this deck fill for diesel fuel?\u003c\/strong\u003e No, the 035740-10 is designed specifically for gasoline, not diesel fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 035740-10 include hold-down hardware or screws?\u003c\/strong\u003e The deck fill is a screw-mount unit; check your existing mounting hardware, as screws are not called out as included with this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the splash lip on this deck fill do?\u003c\/strong\u003e The splash lip on the 035740-10 helps prevent water from splashing into the fuel fill opening during normal boat operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Moeller Marine part number 035740-10 the correct number to order?\u003c\/strong\u003e Yes, 035740-10 is the manufacturer part number for this gasoline deck plate fill.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991090966747,"sku":"MOE-035740-10","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MOE-035740-10_lg__81335.1558116479.500.750.jpg?v=1785188846"},{"product_id":"perko-0126dp0blk-non-locking-fuel-deck-fill-cap-black-polymer-1-1-2-in-hose-gas-fill-replacement-cap","title":"Perko 0126DP0BLK Non-Locking Gas Deck Fill Cap, Black, for 1-1\/2 Inch Fill Hose","description":"\u003cp\u003eThe Perko 0126DP0BLK is a non-locking replacement cap for Perko's non-vented gas deck fill assembly built for 1-1\/2 inch fill hose. The body and cap are molded from fiber reinforced, U.V. Stabilized polymer for resistance to fuel exposure, saltwater spray, and sun degradation on deck. The cap is finished in black to match Perko's standard non-vented gas fill hardware.\u003c\/p\u003e\u003cp\u003eInstallation uses a #8 screw, and no ground wire is required for this cap, simplifying replacement versus fittings that call for bonding. This is a cap-only replacement part, intended for boat owners whose original gas fill cap has cracked, lost its seal, or gone missing, without needing to replace the entire deck fill assembly. It is designed for gasoline fill applications rather than water or waste fills, and is a non-locking design; Perko also makes a locking cap for owners who want a keyed closure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0126DP0BLK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Non-Locking Gas Deck Fill Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fiber Reinforced, U.V. Stabilized Polymer Body and Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFill Hose Size:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Size:\u003c\/strong\u003e #8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround Wire:\u003c\/strong\u003e Not Required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1 x 3 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Watercraft, universal fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226023712\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for watercraft using a 1-1\/2 inch non-vented gas deck fill; no specific make, engine, or year requirement is specified.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 0126DP0BLK?\u003c\/strong\u003e It is a non-locking replacement cap for Perko's non-vented gas deck fill assembly built for 1-1\/2 inch fill hose, sold as the cap only, not the full flange and hose fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cap lock?\u003c\/strong\u003e No, part number 0126DP0BLK is the non-locking version; Perko's locking equivalent with 2 keys is a separate part, 1324DP0BLK.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fill hose does this cap fit?\u003c\/strong\u003e The 0126DP0BLK is sized for a 1-1\/2 inch fill hose deck fill assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the cap made from?\u003c\/strong\u003e The 0126DP0BLK body and cap are molded from fiber reinforced, U.V. Stabilized polymer, chosen for durability against fuel and sun exposure on deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this deck fill cap?\u003c\/strong\u003e Black is the only finish offered for the 0126DP0BLK non-locking gas fill cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to run a ground wire with this cap?\u003c\/strong\u003e No, a ground wire is not required for installation of the 0126DP0BLK cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat screw size is used to secure the cap?\u003c\/strong\u003e A #8 screw is used with the 0126DP0BLK gas deck fill cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a gas or water\/waste deck fill cap?\u003c\/strong\u003e The 0126DP0BLK is designed for a gas (fuel) deck fill, not water or waste applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the cap weigh?\u003c\/strong\u003e The Perko 0126DP0BLK weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this include the deck flange, or just the cap?\u003c\/strong\u003e This listing is for the cap only; the 0126DP0BLK does not include the mounting flange or hose fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats or engines does this fit?\u003c\/strong\u003e The 0126DP0BLK is a universal-fit cap for watercraft using a compatible 1-1\/2 inch non-vented gas deck fill, with no specific make or engine requirement.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991097422043,"sku":"PKO-126DPBLK","price":13.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-126DPBLK__92135.1784651258.500.750.jpg?v=1785188515"},{"product_id":"moeller-manual-vent-gas-cap-with-gauge-vented-fuel-cap-for-topside-marine-tanks-pre-2011-international","title":"Moeller Manual Vent Gas Cap with Gauge, 12.25 Inch, Part 621501-10-1","description":"\u003cp\u003eThe Moeller Manual Vent Gas Cap with Gauge (part number 621501-10-1) is a replacement fill cap designed for manual-vent fuel tank systems, built for use internationally and in boats built before 2011. The cap measures 12.25 inches and incorporates a built-in fuel gauge, letting you check remaining fuel level directly at the fill point without removing the cap or checking a separate gauge elsewhere on the tank. As a manual vent design, the cap relies on the boat's separate vent line configuration rather than an integrated pressure-relief vent, making it suited to older tank setups that use this style of fill and vent arrangement.\u003c\/p\u003e\u003cp\u003eThis gas cap is intended as a direct fit replacement for the fill opening on compatible Moeller-style fuel tanks, restoring a secure, gauge-equipped closure to the fuel system. Because it is rated for international use as well as pre-2011 boats, it suits both older domestic vessels and boats operating under non-US emissions requirements.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 621501-10-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Manual Vent Gas Cap with Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 12.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVent Type:\u003c\/strong\u003e Manual vent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge:\u003c\/strong\u003e Integrated fuel level gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282390686\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Gas Caps and Deck Fills\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFor use internationally and in boats built before 2011\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Moeller 621501-10-1 gas cap used for?\u003c\/strong\u003e The Moeller 621501-10-1 is a manual vent gas cap with a built-in fuel gauge, used to close and monitor the fuel fill opening on compatible manual-vent fuel tank systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cap fit boats built after 2011?\u003c\/strong\u003e The Moeller 621501-10-1 is designated for use internationally and in boats built before 2011; fitment on boats built in 2011 or later is not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Moeller manual vent gas cap?\u003c\/strong\u003e The cap measures 12.25 inches across, corresponding to the fill opening it is designed to close on compatible tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cap include a fuel gauge?\u003c\/strong\u003e Yes, part number 621501-10-1 is a cap with an integrated gauge, so fuel level can be checked directly at the fill point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a manual vent or a pressure-relief vent cap?\u003c\/strong\u003e This is a manual vent design, meaning it relies on a separate vent line in the boat's fuel system rather than a built-in pressure-relief vent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 621501-10-1 gas cap weigh?\u003c\/strong\u003e It weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Moeller 621501-10-1 suited to international use?\u003c\/strong\u003e Yes, this cap is designated for use internationally in addition to boats built before 2011.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 621501-10-1 gas cap?\u003c\/strong\u003e The product is the manual vent gas cap with gauge itself, part number 621501-10-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if this cap will fit my boat's fill opening?\u003c\/strong\u003e Confirm your existing fuel fill uses a manual vent tank system and a 12.25 inch opening, matching the dimensions of the Moeller 621501-10-1 cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is the 621501-10-1?\u003c\/strong\u003e It is classified as a gas cap and deck fill component for marine fuel tank systems.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991101780187,"sku":"MOE-621501-10-1","price":23.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MOE-621501-10_lg__39235.1558117374.500.750.jpg?v=1785329130"},{"product_id":"perko-0506dp4chr-chrome-plated-fuel-tank-vent-with-black-splash-guard-for-5-8-hose-straight-uscg-compliant","title":"Perko 0506DP4CHR Chrome-Plated Straight Fuel Tank Vent with Black Splash Guard, 5\/8 Inch Hose","description":"\u003cp\u003eThe Perko 0506DP4CHR is a straight-style fuel tank vent built from chrome-plated zinc alloy, fitted with a black polymer splash guard to help keep water and spray out of the vent line. It is designed for boats with gasoline fuel systems and connects to 5\/8 inch hose, making it a straightforward replacement or upgrade for aging or corroded vent fittings. A removable 30 mesh stainless steel wire screen serves as a flame arrestor inside the vent body, a key safety feature for gasoline fuel tank venting.\u003c\/p\u003e\u003cp\u003eThis vent is rated for hulls up to 3\/4 inch in maximum thickness, so it is intended for mounting through hull or transom surfaces within that thickness range. The chrome-plated finish resists corrosion in the marine environment while giving a clean, finished appearance on deck or hull hardware. It is part of Perko's straight-style fuel tank vent line, which is also offered with a white splash guard and in a 90 degree angle body style for installations where a straight-through vent will not fit.\u003c\/p\u003e\u003cp\u003eAll of Perko's fuel tank vents in this line are designed to meet U.S. Coast Guard safety standards (January 31, 1977) for gasoline fuel systems under 33 CFR 183, making this vent suitable for use on gasoline-powered boats that must comply with those requirements.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0506DP4CHR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome-Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplash Guard Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Zinc Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplash Guard Material:\u003c\/strong\u003e Polymer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlame Arrestor:\u003c\/strong\u003e Removable 30 Mesh Stainless Steel Wire Screen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Hull Thickness:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.18 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226018619\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e Meets U.S.C.G. Safety Standards (January 31, 1977) for Gasoline Fuel Systems, 33 CFR 183\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the Perko 0506DP4CHR fuel tank vent use?\u003c\/strong\u003e The 0506DP4CHR connects to 5\/8 inch hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum hull thickness this vent will mount through?\u003c\/strong\u003e The 0506DP4CHR straight fuel tank vent is rated for a maximum hull thickness of 3\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the splash guard on this vent black or white?\u003c\/strong\u003e This part number, 0506DP4CHR, comes with a black polymer splash guard. Perko also offers the same straight chrome-plated vent with a white splash guard under a different part number if white is preferred.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this vent include a flame arrestor?\u003c\/strong\u003e Yes, the 0506DP4CHR has a removable 30 mesh stainless steel wire screen inside the body that acts as a flame arrestor for gasoline fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the body of this vent made from?\u003c\/strong\u003e The body is chrome-plated zinc alloy, with a black polymer splash guard covering the outer vent opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this vent meant for gasoline or diesel fuel systems?\u003c\/strong\u003e The 0506DP4CHR is designed for gasoline fuel systems and is built to meet U.S.C.G. Safety standards for gasoline fuel venting under 33 CFR 183.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Perko 0506DP4CHR weigh?\u003c\/strong\u003e This fuel tank vent weighs 0.18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a straight or angled vent fitting?\u003c\/strong\u003e The 0506DP4CHR is the straight-style vent. Perko also makes a 90 degree angle version of this vent for a 1 inch maximum hull thickness under a different part number, for installations where a straight vent will not fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the flame arrestor screen be cleaned or replaced?\u003c\/strong\u003e The 30 mesh stainless steel wire screen flame arrestor in the 0506DP4CHR is removable, allowing it to be taken out for cleaning or inspection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this vent safety rated for use on gasoline boats?\u003c\/strong\u003e Yes, the 0506DP4CHR is designed to meet U.S. Coast Guard safety standards of January 31, 1977 for gasoline fuel systems, per 33 CFR 183.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 0506DP4CHR have?\u003c\/strong\u003e It has a chrome-plated finish on the zinc alloy body.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991104303323,"sku":"PKO-506DP4CHR","price":18.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-506DP4CHR_lg__14864.1558117797.500.750.jpg?v=1785188592"},{"product_id":"perko-0513dp8-deck-fill-o-ring-set-for-1-1-2-in-hose-fill-and-waste-cover-plates-pack-of-2","title":"Perko 0513DP8 O-Ring Set for 1-1\/2 Inch Deck Fill Caps, Pack of 2","description":"\u003cp\u003eThe Perko 0513DP8 is a replacement O-ring set for Perko deck fill caps that use a 1-1\/2 inch hose. Each bag contains 2 O-rings, giving you the seals needed to freshen up a deck fill cap without replacing the entire fitting. These O-rings fit the Perko Fig. 1270 Diesel Cap, Fig. 1270 Water Cap, and Fig. 1269 Waste Cap, and are also used with the Perko cap series 0527, 0528, and 0524. Deck fill caps rely on an intact O-ring to keep out water and debris and to maintain a tight seal at the deck plate; over time these rubber rings wear, flatten, or crack, and a fresh set restores the original seal.\u003c\/p\u003e\u003cp\u003eThe O-ring has a nominal inside and outside diameter of 1.5 inches to match the 1-1\/2 inch hose size used on these deck fill assemblies. The set is made of rubber for flexibility and resistance to marine exposure. This is a small, lightweight item intended purely as a replacement seal, not a full deck fill kit, so it does not include the cap, flange, or deck plate key.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0513DP8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e O-Rings Only (2 per bag)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Inside Diameter:\u003c\/strong\u003e 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Outside Diameter:\u003c\/strong\u003e 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 0.5 inches H x 3 inches W x 7.5 inches L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226342844\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePerko Fig. 1270 Diesel Cap with O-Ring and Retainer\u003c\/li\u003e\n\u003cli\u003ePerko Fig. 1270 Water Cap with O-Ring and Retainer\u003c\/li\u003e\n\u003cli\u003ePerko Fig. 1269 Waste Cap with O-Ring\u003c\/li\u003e\n\u003cli\u003ePerko cap series 0527, 0528, and 0524\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many O-rings come in the Perko 0513DP8 package?\u003c\/strong\u003e The Perko 0513DP8 bag contains 2 O-rings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size is the 0513DP8 O-ring designed for?\u003c\/strong\u003e It is sized for 1-1\/2 inch hose deck fill caps, with a nominal inside and outside diameter of 1.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Perko deck fill caps use this O-ring?\u003c\/strong\u003e The 0513DP8 O-ring fits the Perko Fig. 1270 Diesel Cap, Fig. 1270 Water Cap, and Fig. 1269 Waste Cap, and is also used with the Perko cap series 0527, 0528, and 0524.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 0513DP8 O-ring made of?\u003c\/strong\u003e It is made of rubber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 0513DP8 set include a deck plate key?\u003c\/strong\u003e No, the deck plate key is a separate Perko part, 12487-8DP, and is not included with the 0513DP8 O-ring set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko 0513DP8 a genuine Perko part?\u003c\/strong\u003e Yes, 0513DP8 is the Perko manufacturer part number for this O-ring set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the 0513DP8 O-ring set?\u003c\/strong\u003e The set measures 0.5 inches high by 3 inches wide by 7.5 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 0513DP8 O-ring set weigh?\u003c\/strong\u003e It weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 0513DP8 O-ring work on both diesel\/water fill caps and waste fill caps?\u003c\/strong\u003e Yes, the same 0513DP8 O-ring fits Perko diesel and water Fig. 1270 caps as well as the Fig. 1269 waste cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Perko 0513DP8?\u003c\/strong\u003e The UPC is 085226342844.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes replacing the O-ring restore the seal on a Perko deck fill cap?\u003c\/strong\u003e The 0513DP8 O-ring is the sealing component of the deck fill cap, so fitting a new one restores the seal between the cap and the deck plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a full deck fill cap replacement?\u003c\/strong\u003e No, the 0513DP8 is O-rings only; it does not include the cap, flange, or retainer, which are sold separately as complete cap assemblies.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991104631003,"sku":"PKO-0513DP8","price":8.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Perko-0513DP8-Spare-O-Rings__74476.1722495722.500.750.jpg?v=1785188294"},{"product_id":"perko-0537dp-stainless-steel-retaining-cable-for-fuel-deck-fills-and-deck-plates-7-safety-cord","title":"Perko 0537DP Fuel Deck Fill Retaining Cable, Stainless Steel","description":"\u003cp\u003eThe Perko 0537DP is a stainless steel retaining cable used to secure the cap of a fuel deck fill to the deck plate, preventing the cap from being lost overboard when it is removed for fueling. The cable and all fittings are built from stainless steel for corrosion resistance in a marine environment. It includes a 1-3\/8 inch stainless steel ring and a self-tapping screw for mounting to the deck fill housing, with a 7 inch cable length connecting the ring to the cap. This retaining cable is compatible with both gasoline and diesel deck fills, making it a straightforward add-on or replacement part for boat owners maintaining their fuel fill hardware. Because the cap is tethered directly to the deck plate, it stays within reach and cannot roll away or fall into the water during refueling, a common annoyance and safety hazard on deck fills that lack this hardware. Installation is simple: the ring is fastened to the deck plate opening with the included self-tapping screw, and the cable attaches to the cap. This part is sold as a standalone accessory for boat owners who need to replace a worn, broken, or missing retaining cable on an existing Perko deck fill.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0537DP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRing Size:\u003c\/strong\u003e 1-3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Self-tapping screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type Compatibility:\u003c\/strong\u003e Diesel, Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.75 x 3 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226048081\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 0537DP used for?\u003c\/strong\u003e The Perko 0537DP is a retaining cable that tethers a fuel deck fill cap to its deck plate so the cap cannot be dropped or lost overboard while fueling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cable length on the 0537DP retaining cable?\u003c\/strong\u003e The Perko 0537DP has a 7 inch cable connecting the mounting ring to the deck fill cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 0537DP compatible with both gas and diesel deck fills?\u003c\/strong\u003e Yes, the Perko 0537DP retaining cable is compatible with both gasoline and diesel fuel deck fills.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 0537DP made from?\u003c\/strong\u003e It is constructed of stainless steel, including the cable, ring, and fittings, for corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the mounting ring on the 0537DP?\u003c\/strong\u003e The Perko 0537DP includes a 1-3\/8 inch stainless steel mounting ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is included for installing the 0537DP?\u003c\/strong\u003e A self-tapping screw is included with the Perko 0537DP to fasten the stainless steel ring to the deck plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 0537DP retaining cable weigh?\u003c\/strong\u003e The Perko 0537DP weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 0537DP include the deck fill cap or deck plate itself?\u003c\/strong\u003e No, the Perko 0537DP is the retaining cable and mounting hardware only; it does not include the deck fill cap or deck plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 0537DP package?\u003c\/strong\u003e The Perko 0537DP measures 5.75 x 3 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace this retaining cable?\u003c\/strong\u003e A retaining cable like the Perko 0537DP is typically replaced when the original cable has corroded, broken, or gone missing, leaving the deck fill cap untethered.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991104696539,"sku":"PKO-537DP","price":8.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-537DP_lg__43207.1558117860.500.750.jpg?v=1785188539"},{"product_id":"perko-054000099b-o-ring-for-540-series-deck-fill-cap-nitrile-rubber-seal-2-1-8-in-mounting-hole","title":"Perko O-Ring for 540 Series Deck Fill Cap, 054000099B, 2.06 Inch Nitrile Rubber Seal","description":"\u003cp\u003eThe Perko 054000099B O-Ring is a replacement seal designed for select Perko deck fill assemblies, including the 540 series caps. It creates a watertight seal between the hull and the fill, helping keep water out of the fuel or waste system at the deck fitting. This O-ring is made of nitrile rubber, a material chosen for its resistance to fuel, oil, and marine chemicals, and it is finished in black to match standard Perko deck fill hardware.\u003c\/p\u003e\u003cp\u003eThe ring has a nominal inside diameter of 2.06 inches and is intended for use in applications requiring a 2-1\/8 inch mounting hole. It is compatible with both chrome-finished and polymer Perko deck fill assemblies, making it a straightforward spare or replacement part for boat owners maintaining existing deck fill installations rather than replacing the entire fitting. Each unit ships as a single O-ring.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 054000099B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nitrile Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Inside Diameter:\u003c\/strong\u003e 2.06 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Size:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Chrome-finished and polymer Perko deck fill assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1 O-ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 054000099B O-Ring used for?\u003c\/strong\u003e It is a replacement seal for select Perko deck fill assemblies that creates a watertight seal between the hull and the fill, including 540 series deck fill caps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole does this O-ring fit?\u003c\/strong\u003e The Perko 054000099B is intended for use in applications requiring a 2-1\/8 inch mounting hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the inside diameter of this O-ring?\u003c\/strong\u003e The nominal inside diameter of the 054000099B O-ring is 2.06 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the O-ring made from?\u003c\/strong\u003e Perko 054000099B is made of nitrile rubber, chosen for resistance to fuel, oil, and marine chemicals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this O-ring work with a chrome deck fill?\u003c\/strong\u003e Yes, the 054000099B O-ring works with both chrome-finished and polymer Perko deck fill assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this O-ring fit polymer deck fill assemblies too?\u003c\/strong\u003e Yes, it is designed to work with both polymer and chrome-finished Perko deck fill fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many O-rings come in a purchase?\u003c\/strong\u003e Each order of the Perko 054000099B includes one O-ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the O-ring?\u003c\/strong\u003e The 054000099B O-ring is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this O-ring a genuine Perko part or an aftermarket substitute?\u003c\/strong\u003e The 054000099B is a genuine Perko spare part designed specifically as a replacement component for Perko deck fill assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace this O-ring?\u003c\/strong\u003e Over time the seal on a deck fill can wear, crack, or lose its watertight fit, so replacing the 054000099B O-ring restores the watertight seal between the hull and the fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 054000099B O-ring stop water from entering the fuel system?\u003c\/strong\u003e It helps create a watertight seal between the hull and the fill to keep water out at that connection point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko 054000099B O-ring easy to install?\u003c\/strong\u003e As a spare seal for the deck fill assembly, the 054000099B O-ring is designed to be swapped in place of the existing worn seal on the fill fitting.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991104860379,"sku":"PKO-054000099B","price":3.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Perko-054000099B-Replacement-O-Ring__66249.1722509741.500.750.jpg?v=1785188745"},{"product_id":"perko-0525dp0blk-fuel-system-locking-cap-for-1-1-2-non-vented-fills-keyed-anti-theft-insert","title":"Perko Fuel System Locking Cap 0525DP0BLK for 1-1\/2 Inch Non-Vented Fuel Fills","description":"\u003cp\u003eThe Perko 0525DP0BLK is a fuel system locking cap built for 1-1\/2 inch non-vented fuel fills, giving boaters a way to secure the fuel fill from unauthorized access or tampering while docked or in storage. The cap body and gasket are made of polymer for corrosion resistance around the fill opening, while the lock cylinder itself is zinc alloy for durability. A built-in lock cylinder with a cover over the key hole keeps the mechanism protected from spray and debris when not in use.\u003c\/p\u003e\u003cp\u003eThis locking cap is offered in two cylinder sizes to match different Perko fill necks: Size #0 fits Perko fills 1313 and 1399, and Size #1 fits Perko fills 0520, 0527, 0528, and 0557. It is packaged as a retail unit under Perko Fig. 0525. This cap is not intended for use with EPA compliant gas fills equipped with Vacuum Pressure Relief (VPR) valves, which include Perko Fig. Nos. 0660, 0661, 0662, 0663, 0780, 0781, 0782, 0783, 0790, and 0791.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0525DP0BLK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Description:\u003c\/strong\u003e Fuel System Locking Cap for 1-1\/2 Inch Non-Vented Fills\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polymer body and gasket with zinc alloy lock cylinder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock Feature:\u003c\/strong\u003e Built-in lock cylinder with cover for key hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Fill Sizes:\u003c\/strong\u003e Size #0 fits Perko fills 1313 and 1399; Size #1 fits Perko fills 0520, 0527, 0528, and 0557\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Compatible With:\u003c\/strong\u003e EPA compliant VPR gas fills, Perko Fig. Nos. 0660, 0661, 0662, 0663, 0780, 0781, 0782, 0783, 0790, 0791\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Retail package, Fig. 0525\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7 x 3 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSize #0 cylinder fits Perko fills 1313 and 1399\u003c\/li\u003e\n\u003cli\u003eSize #1 cylinder fits Perko fills 0520, 0527, 0528, and 0557\u003c\/li\u003e\n\u003cli\u003eNot for use with EPA compliant VPR gas fills, Perko Fig. Nos. 0660, 0661, 0662, 0663, 0780, 0781, 0782, 0783, 0790, 0791\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size fuel fill does the Perko 0525DP0BLK fit?\u003c\/strong\u003e The Perko 0525DP0BLK is a fuel system locking cap sized for 1-1\/2 inch non-vented fuel fills.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Perko fill necks does this locking cap fit?\u003c\/strong\u003e With the Size #0 cylinder it fits Perko fills 1313 and 1399, and with the Size #1 cylinder it fits Perko fills 0520, 0527, 0528, and 0557.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 0525DP0BLK on an EPA compliant gas fill?\u003c\/strong\u003e No. The Perko 0525DP0BLK is not for use with EPA compliant gas fills that have Vacuum Pressure Relief (VPR) valves, which cover Perko Fig. Nos. 0660, 0661, 0662, 0663, 0780, 0781, 0782, 0783, 0790, and 0791.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 0525DP0BLK made of?\u003c\/strong\u003e It has a polymer body and gasket paired with a zinc alloy lock cylinder for the locking mechanism.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the locking cap come with a key hole cover?\u003c\/strong\u003e Yes, the Perko 0525DP0BLK has a built-in lock cylinder with a cover over the key hole to protect it from spray and debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Perko 0525DP0BLK locking cap?\u003c\/strong\u003e This locking cap is black, as indicated by the BLK designation in its part number, 0525DP0BLK.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Perko 0525DP0BLK weigh?\u003c\/strong\u003e The Perko 0525DP0BLK weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Perko 0525DP0BLK?\u003c\/strong\u003e The item measures 7 x 3 x 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 0525DP0BLK for a vented or non-vented fuel fill?\u003c\/strong\u003e It is designed as a fuel system locking cap for 1-1\/2 inch non-vented fuel fills, not vented fills.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Perko 0525DP0BLK packaged?\u003c\/strong\u003e It ships as a retail package under Perko Fig. 0525, model 0525DP0BLK.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Perko 0525DP0BLK fit all Perko fuel fills?\u003c\/strong\u003e No, it only fits the specific Perko fill part numbers it is designed for: 1313 and 1399 with the Size #0 cylinder, or 0520, 0527, 0528, and 0557 with the Size #1 cylinder.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991104958683,"sku":"PKO-525DP0BLK","price":41.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/0525DP0BLK__20257.1737827047.500.750.jpg?v=1785188961"},{"product_id":"perko-0542dpgblk-vented-fuel-fill-with-angled-neck-for-1-1-2-hose-black-polymer-gas-marked-with-flame-arrestor-vent","title":"Perko 0542DPGBLK Vented Fuel Fill, Angled Neck, Black Polymer, for 1-1\/2 Inch Hose","description":"\u003cp\u003eThe Perko 0542DPGBLK is a vented fuel fill built for boats using 1-1\/2 inch fuel fill hose. It combines the deck fill cap, body, and tank vent into a single angled-neck fitting, so the vent path is integrated directly into the fill rather than requiring a separate vent fitting. The vent incorporates a flame arrestor and an anti-surge valve, which helps control fuel vapor and reduce splash-back through the vent line during fueling and while underway. The cap and body are molded from black plastic, and the fill comes with a matching black plastic strap and a deck plate key for opening and closing the cap.\u003c\/p\u003e\u003cp\u003eThis fill is sized for 1-1\/2 inch fuel fill hose and 5\/8 inch vent hose, with a flange outer diameter of 3-5\/8 inches, a mounting hole diameter of 2-1\/8 inches, and number 8 mounting screws. It installs through a deck or hull cutout matching those dimensions. In locations where splashed water may reach the fill, Perko offers a separate heightening ring accessory (in split or non-split versions) that raises the fill opening an additional 3\/8 inch above the deck surface to reduce the chance of water entering through the vent; this ring is a distinct accessory item, not part of the 0542DPGBLK fill itself, and it will not protect against a fully submerged or flooded cap.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0542DPGBLK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeck Style:\u003c\/strong\u003e Angled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Hose Size:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVent Hose Size:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Outer Diameter:\u003c\/strong\u003e 3-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Screw Size:\u003c\/strong\u003e Number 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 10.25 x 6.25 x 3.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226051494\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Vented fill cap and body, mounting strap, deck plate key\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits installations using 1-1\/2 inch fuel fill hose and 5\/8 inch vent hose with a 2-1\/8 inch mounting hole and 3-5\/8 inch flange diameter.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Perko 0542DPGBLK fit?\u003c\/strong\u003e The Perko 0542DPGBLK is sized for 1-1\/2 inch fuel fill hose and 5\/8 inch vent hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fill include a built-in vent?\u003c\/strong\u003e Yes, the 0542DPGBLK has an integral tank vent with a flame arrestor and an anti-surge valve, so a separate vent fitting is not needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and material is the 0542DPGBLK?\u003c\/strong\u003e It is black, molded from plastic, including the cap, body, and mounting strap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mounting hole size for this deck fill?\u003c\/strong\u003e The mounting hole diameter is 2-1\/8 inches, with a flange outer diameter of 3-5\/8 inches, and it uses number 8 mounting screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Perko 0542DPGBLK come with a key?\u003c\/strong\u003e Yes, a deck plate key is included for opening and closing the cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 0542DPGBLK weigh?\u003c\/strong\u003e The Perko 0542DPGBLK weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fill an OEM Perko part?\u003c\/strong\u003e Yes, 0542DPGBLK is the Perko manufacturer part number for this vented fill, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this fill?\u003c\/strong\u003e The Perko 0542DPGBLK measures 10.25 x 6.25 x 3.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill water get into the fuel system through the vent in splashy conditions?\u003c\/strong\u003e In locations where water might splash around the fill, Perko offers a separate heightening ring accessory that raises the fill opening 3\/8 inch above the deck to reduce water entering through the breathing vent on fittings like the 0542DPGBLK; it is a separate part from the fill itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fill protect against a submerged cap?\u003c\/strong\u003e No. Neither the 0542DPGBLK fill nor the optional heightening ring will keep water out if the cap becomes submerged or substantially flooded; in that case the fill\/vent needs to be relocated or replaced with a sealed cap and a separately located vent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the neck straight or angled on this model?\u003c\/strong\u003e The 0542DPGBLK has an angled neck design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Perko fill?\u003c\/strong\u003e The UPC for the Perko 0542DPGBLK is 085226051494.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991104991451,"sku":"PKO-0542DPGBLK","price":41.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-0542DPGBLK__82846.1722503296.500.750.jpg?v=1785188878"},{"product_id":"perko-0541dpgchr-vented-fuel-fill-straight-neck-1-1-2-hose-gas-chrome-plated-cap-with-integral-flame-arrestor-vent","title":"Perko 0541DPGCHR Vented Gas Deck Fill, Straight Neck, 1-1\/2 Inch Hose, Chrome-Plated Bronze Cap","description":"\u003cp\u003eThe Perko 0541DPGCHR is a vented gas deck fill with a straight neck, built for boats using 1-1\/2 inch fuel fill hose. The cap is chrome-plated bronze and is marked \"GAS\" so the fill is clearly identified at the deck, while the body is molded from durable black plastic. A stainless steel beaded chain keeps the cap tethered to the fill so it is never misplaced during fueling, and a deck plate key is included for opening and closing the cap.\u003c\/p\u003e\u003cp\u003eThis fill has an integral tank vent built into the fitting, complete with a flame arrestor and an anti-surge valve, so it manages both fuel filling and tank venting in a single deck fitting. The vent side connects to 5\/8 inch vent hose. The flange measures 3-3\/8 inches outside diameter and mounts over a 2-1\/8 inch hole using #8 screws, matching standard Perko deck fill mounting patterns. Because it is a vented fill, Perko offers a mounting\/heightening ring (sold separately) that is compatible with Fig. No. 0541 fills; the ring raises the cap and fill an additional 3\/8 inch above the deck surface to reduce the chance of splashed water reaching the breathing vent in wet installations.\u003c\/p\u003e\u003cp\u003eSuitable for boat gas tank installations where a straight-neck, 1-1\/2 inch hose fill with integrated venting is required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0541DPGCHR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Vented Fuel Fill, Straight Neck\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarking:\u003c\/strong\u003e Gas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Material:\u003c\/strong\u003e Chrome-plated bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Black plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain:\u003c\/strong\u003e Stainless steel beaded chain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVent Hose Size:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Outside Diameter:\u003c\/strong\u003e 3-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Size:\u003c\/strong\u003e #8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Deck plate key\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e Integral tank vent with flame arrestor and anti-surge valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 10.16 x 6.14 x 3.74 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.7 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Perko 0541DPGCHR fit?\u003c\/strong\u003e The 0541DPGCHR uses 1-1\/2 inch fuel fill hose and 5\/8 inch vent hose, since it has a straight neck fill combined with an integral tank vent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fill vented?\u003c\/strong\u003e Yes, the 0541DPGCHR has an integral tank vent built into the fitting, with a flame arrestor and an anti-surge valve, so it handles both filling and tank venting in one unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cap made of?\u003c\/strong\u003e The cap on the 0541DPGCHR is chrome-plated bronze, while the fill body is black plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cap stay attached when opened?\u003c\/strong\u003e Yes, a stainless steel beaded chain tethers the cap to the fill body on the Perko 0541DPGCHR so it will not be dropped or lost during fueling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this fill?\u003c\/strong\u003e The Perko 0541DPGCHR ships with a deck plate key for opening and closing the cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the fill marked?\u003c\/strong\u003e The 0541DPGCHR is marked \"GAS\" on the cap so the fitting is clearly identified as a gasoline fill point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole does this fill require for mounting?\u003c\/strong\u003e The 0541DPGCHR mounts over a 2-1\/8 inch hole using #8 screws, with a flange outside diameter of 3-3\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the fill weigh?\u003c\/strong\u003e The Perko 0541DPGCHR weighs 0.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan water get into the fuel system through this fill?\u003c\/strong\u003e Splashed water is reduced by the fill's design, but if the cap becomes submerged or substantially flooded, water can still enter; in wet-splash locations Perko offers a mounting ring compatible with Fig. No. 0541 fills that raises the cap and fill an additional 3\/8 inch above the deck to reduce splash entry through the vent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the packaged fill?\u003c\/strong\u003e The Perko 0541DPGCHR measures 10.16 x 6.14 x 3.74 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a mounting ring available for this fill?\u003c\/strong\u003e Yes, Perko makes a heightening\/mounting ring compatible with Fig. No. 0541 vented fills (sold separately) for installations where splashed water is a concern; it raises the fill opening 3\/8 inch above the deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fill work with any boat, or specific models only?\u003c\/strong\u003e The 0541DPGCHR is a universal-fit gas deck fill designed for boats using a 1-1\/2 inch fill hose, not restricted to a specific make or model.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991105056987,"sku":"PKO-541DPGCHR","price":63.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-0541DPGCHR__10068.1739460319.500.750.jpg?v=1785188565"},{"product_id":"perko-0540dpg99a-vented-fuel-fill-cap-with-chain-and-o-ring-for-1-1-2-in-angled-neck-gas-fills","title":"Perko 0540DPG99A Cap, O-Ring and Retainer for 1-1\/2 Inch Angled Neck Vented Fuel Fills - Gas","description":"\u003cp\u003eThe Perko 0540DPG99A is a replacement cap, O-ring, and retainer assembly for 1-1\/2 inch angled neck vented fuel fills on gasoline-powered boats. It replaces the original Perko cap on this style of fill, restoring a secure, corrosion-resistant closure over the fuel fill opening. The cap itself is chrome-plated bronze, mounted to a black plastic body, with a stainless steel beaded chain tethering the cap to the fill so it cannot be dropped or lost overboard during fueling. Built into the cap assembly is an integral tank vent equipped with a flame arrestor and an anti-surge valve, helping manage vapor venting from the tank while reducing the risk of flame entering through the vent path and limiting fuel surge out of the vent during rough water or fast fills. A deck plate key is included, sized to turn the cap for removal and installation. The complete assembly weighs 0.46 pounds and ships in a 10 x 5 x 1 inch package. Because the fill hardware is exposed to salt air, fuel, and repeated handling, the chrome-plated bronze and stainless steel chain are chosen for corrosion resistance over painted or plastic-only alternatives. This part is intended as a direct replacement for boat owners whose existing 1-1\/2 inch angled neck vented gas fill cap has become worn, cracked, seized, or lost, restoring the fill to factory-original fit and function without changing the deck plate or the mounting hardware underneath.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0540DPG99A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Vented Fuel Fill Cap, O-Ring and Retainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 1-1\/2 Inch Angled Neck Vented Fuel Fills, Gas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Material:\u003c\/strong\u003e Chrome Plated Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Black Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain Material:\u003c\/strong\u003e Stainless Steel Beaded Chain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVent Features:\u003c\/strong\u003e Integral Tank Vent with Flame Arrestor and Anti-Surge Valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Deck Plate Key\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 10 x 5 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.46 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Twist-On\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Perko 0540DPG99A cap fit?\u003c\/strong\u003e It is sized for 1-1\/2 inch angled neck vented fuel fills on gasoline-powered boats, replacing the factory Perko cap on that fill style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Perko part or an aftermarket copy?\u003c\/strong\u003e The 0540DPG99A carries an OEM Equivalent Part Number of 0540DPG99A, meaning it is the same part number as the original factory cap rather than a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials make up the cap assembly?\u003c\/strong\u003e The 0540DPG99A cap itself is chrome-plated bronze, attached to a black plastic body by a stainless steel beaded chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cap include a vent?\u003c\/strong\u003e Yes, the 0540DPG99A has an integral tank vent built into the cap assembly, complete with a flame arrestor and an anti-surge valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The 0540DPG99A package includes the chrome-plated cap, the black plastic body with O-ring, the stainless steel beaded chain, and a deck plate key for removing the fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 0540DPG99A weigh?\u003c\/strong\u003e The complete cap, O-ring, and retainer assembly weighs 0.46 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the packaged cap assembly?\u003c\/strong\u003e The 0540DPG99A ships in a 10 x 5 x 1 inch package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the cap?\u003c\/strong\u003e The body of the 0540DPG99A is black, paired with a chrome-plated bronze cap top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cap attach or close on the fill?\u003c\/strong\u003e The 0540DPG99A uses a twist-on closure, and the stainless steel beaded chain keeps the cap tethered to the fill so it cannot be lost overboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs fuel type a consideration with this cap?\u003c\/strong\u003e Yes, the 0540DPG99A is designed for gas (gasoline) vented fuel fills, not diesel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does a vented fuel fill need a flame arrestor?\u003c\/strong\u003e The integral vent on the 0540DPG99A includes a flame arrestor to help block flame from entering the fuel tank through the vent path, along with an anti-surge valve to limit fuel surge out of the vent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 0540DPG99A be used on any deck fill, or just this fill type?\u003c\/strong\u003e It is built specifically for 1-1\/2 inch angled neck vented fuel fills and serves as a direct replacement for the original Perko cap on that fitting.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991105220827,"sku":"PKO-540DPG99A","price":48.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-540DPG99A_lg__91754.1558117908.500.750.jpg?v=1785188646"},{"product_id":"perko-0561dp4chr-gas-tank-vent-with-90-degree-swivel-elbow-and-flame-arrestor-chrome-5-8-hose","title":"Perko 0561DP4CHR 90 Degree Gas Tank Vent, Chrome-Plated Swivel Elbow, Black Splash Guard","description":"\u003cp\u003eThe Perko 0561DP4CHR is a 90 degree angle gas tank vent designed to safely vent gasoline fuel tanks on outboard, I\/O, and inboard powered boats. The vent features a chrome-plated zinc cap paired with a zinc elbow, so the assembly resists corrosion in the marine environment while the swivel-style elbow design allows it to turn in any direction for flexible hose routing during installation. A removable 30 mesh stainless steel wire screen flame arrestor is mounted inside the vent body, a critical safety feature for gasoline fuel systems that helps prevent external ignition sources from reaching vapors inside the tank.\u003c\/p\u003e\u003cp\u003eA black plastic splash guard shields the vent opening from spray and washdown water, and the unit is rated for a maximum hull thickness of 1 inch, with a hose size of 5\/8 inch to match standard fuel vent hose. Perko builds this vent to meet U.S.C.G. Safety Standards of January 31, 1977 for gasoline fuel systems under 33 CFR 183, so it is a suitable direct replacement for OEM or worn gasoline vent fittings on boats that require Coast Guard compliant venting. This is the Retail Pkg 90 degree, black splash guard version of the Perko fuel vent line; Perko also offers a straight style and a white splash guard version under different part numbers, so confirm the 0561DP4CHR part number before ordering to get the correct angle and color.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0561DP4CHR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e 90 Degree Angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome-Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplash Guard Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Hull Thickness:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlame Arrestor:\u003c\/strong\u003e Removable 30 Mesh Stainless Steel Wire Screen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap and Elbow Material:\u003c\/strong\u003e Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplash Guard Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 7 x 3 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226020728\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e Meets U.S.C.G. Safety Standards January 31, 1977 for Gasoline Fuel Systems, 33 CFR 183\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eSuited for gasoline fuel systems on outboard, I\/O, and inboard powered boats. Perko rates this vent for hulls up to 1 inch thick and 5\/8 inch fuel vent hose.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 0561DP4CHR used for?\u003c\/strong\u003e It is a 90 degree angle gas tank vent that lets gasoline vapor escape a fuel tank safely on outboard, I\/O, and inboard boats, while a built-in flame arrestor blocks outside ignition sources from reaching the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the elbow on the 0561DP4CHR fixed or adjustable?\u003c\/strong\u003e The elbow swivels and can turn in any direction, which lets you aim the vent outlet and route the hose without having to twist the hose itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does this vent fit?\u003c\/strong\u003e The 0561DP4CHR is built for 5\/8 inch fuel vent hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum hull thickness for this vent?\u003c\/strong\u003e Perko rates the 0561DP4CHR for hulls up to 1 inch thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the splash guard on the 0561DP4CHR?\u003c\/strong\u003e This part number comes with a black splash guard; Perko also sells a white splash guard version, 0561DP4WHT, under a different part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the vent housing and cap made of?\u003c\/strong\u003e The 0561DP4CHR has a chrome-plated zinc cap and a zinc elbow, with a black plastic splash guard covering the opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 0561DP4CHR include a flame arrestor?\u003c\/strong\u003e Yes, it includes a removable 30 mesh stainless steel wire screen flame arrestor, intended for gasoline fuel system applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this vent meet Coast Guard standards?\u003c\/strong\u003e The 0561DP4CHR is designed to meet U.S.C.G. Safety Standards of January 31, 1977 for gasoline fuel systems under 33 CFR 183.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 0561DP4CHR weigh?\u003c\/strong\u003e This Perko gas tank vent weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the vent?\u003c\/strong\u003e The Perko 0561DP4CHR measures 7 x 3 x 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the flame arrestor screen be removed and cleaned?\u003c\/strong\u003e Yes, the 30 mesh stainless steel wire screen inside the 0561DP4CHR is removable for cleaning or replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 0561DP4CHR and the 0506DP4CHR?\u003c\/strong\u003e The 0561DP4CHR is the 90 degree angle style rated to 1 inch hull thickness, while the 0506DP4CHR is a straight style rated to 3\/4 inch hull thickness; both come in a black splash guard, chrome-plated finish.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991107481819,"sku":"PKO-561DP4CHR","price":21.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-0561DP4CHR_lg__84934.1558118037.500.750.jpg?v=1785188879"},{"product_id":"perko-gas-tank-vent-with-white-cap-marine-fuel-tank-vent-fitting-mpn-0570dp4wht","title":"Perko Gas Tank Vent with White Cap, Chrome-Plated Deck Vent, Part Number 0570DP4WHT","description":"\u003cp\u003eThe Perko 0570DP4WHT is a gas tank deck vent fitted with a white cap, designed to vent fuel tank vapors safely through the deck or hull of a boat. The body and cap are made of plastic for corrosion resistance in a marine environment, with a chrome-plated finish that gives the fitting a clean, polished appearance on deck or transom mounting surfaces. This vent is sold as a single unit and includes the vent body, cap, and fuel deck plate needed to complete the installation. It is a compact fitting, with overall packaged dimensions of 5.79 x 3.07 x 1.34 inches, making it suitable for smaller boats and standard fuel tank venting applications where a low-profile, white-capped vent is preferred. As a genuine Perko part, it is built to the same fit and finish standards as other Perko deck hardware and ventilation fittings.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0570DP4WHT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Gas Tank Vent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5.79 x 3.07 x 1.34 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.21 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226023545\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Vent, cap, and fuel deck plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 0570DP4WHT used for?\u003c\/strong\u003e It is a gas tank vent that mounts on a boat's deck or hull to vent fuel tank vapors safely, and it comes with a white cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the cap on this Perko vent?\u003c\/strong\u003e The cap is white, which is part of the part number designation on the Perko 0570DP4WHT.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Perko 0570DP4WHT made of?\u003c\/strong\u003e The vent body and cap are made of plastic, with a chrome-plated finish on the visible fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this gas tank vent weigh?\u003c\/strong\u003e The Perko 0570DP4WHT weighs 0.21 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Perko 0570DP4WHT?\u003c\/strong\u003e Packaged, the vent measures 5.79 x 3.07 x 1.34 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this part?\u003c\/strong\u003e The 0570DP4WHT includes the vent, the white cap, and a fuel deck plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 0570DP4WHT a genuine Perko part?\u003c\/strong\u003e Yes, it is a genuine Perko gas tank vent identified by the part number 0570DP4WHT.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many vents come in one order?\u003c\/strong\u003e One order of the Perko 0570DP4WHT includes a single vent unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Perko 0570DP4WHT come in other cap colors?\u003c\/strong\u003e This specific part number, 0570DP4WHT, is the white-cap version; other cap colors would carry a different Perko part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko gas tank vent corrosion resistant?\u003c\/strong\u003e The plastic construction with a chrome-plated finish is intended to hold up in a marine environment on the 0570DP4WHT vent.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991107711195,"sku":"PKO-0570DP4WHT","price":16.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/pko-0570dp4wht_lg_1__57331.1558171952.500.750.jpg?v=1785188335"},{"product_id":"perko-0662dpg99b-sealed-epa-gas-cap-with-vapor-relief-black-polymer-fits-1-1-2-in-fuel-fills","title":"Perko 0662DPG99B EPA Compliant Sealed Gas Cap with VPR, Black","description":"\u003cp\u003eThe Perko 0662DPG99B is a sealed, ratcheting-style replacement gas cap built for 1-1\/2 inch hose fills on boats. It is EPA compliant and constructed of durable polymer for long-term exposure to marine conditions, saltwater spray, and UV. The twist-on, ratcheting closure seats the cap securely against the fill to help maintain a tight seal, and the cap is finished in black to match common OEM deck fill hardware. This is a fit-specific part, so confirm your existing part number matches 0662DPG99B before ordering.\u003c\/p\u003e\u003cp\u003eThe cap comes complete with the O-ring and retainer needed for installation, so it is ready to install directly onto a compatible 1-1\/2 inch hose fill without sourcing additional hardware separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0662DPG99B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic (polymer construction)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polymer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Twist-On, sealing\/ratcheting style\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFill Hose Size:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e O-ring and retainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e EPA compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226783135\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the Perko 0662DPG99B gas cap fit?\u003c\/strong\u003e The Perko 0662DPG99B is sized for 1-1\/2 inch hose fills.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 0662DPG99B EPA compliant?\u003c\/strong\u003e Yes, the Perko 0662DPG99B is an EPA compliant sealed gas cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the closure style of this cap?\u003c\/strong\u003e It uses a sealing, ratcheting-style twist-on closure rather than a plain friction-fit lid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Perko 0662DPG99B made of?\u003c\/strong\u003e This cap is made of durable polymer (plastic) construction, finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 0662DPG99B come with an O-ring?\u003c\/strong\u003e Yes, the Perko 0662DPG99B includes the O-ring and retainer needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this gas cap weigh?\u003c\/strong\u003e The Perko 0662DPG99B weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 0662DPG99B cap?\u003c\/strong\u003e It is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 0662DPG99B fit any deck fill?\u003c\/strong\u003e No, this is a fit-specific part. Confirm your existing fill or cap part number matches 0662DPG99B before purchasing, since fills vary by manufacturer and size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Perko part?\u003c\/strong\u003e Yes, the 0662DPG99B is a genuine Perko replacement gas cap, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 0662DPG99B?\u003c\/strong\u003e The order includes the Perko 0662DPG99B sealing, ratcheting gas cap along with its O-ring and retainer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the seal on this cap reliable in wet conditions?\u003c\/strong\u003e The 0662DPG99B uses a sealing, ratcheting design intended to seat securely on the fill, though its performance depends on proper installation on a matching fill.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991107776731,"sku":"PKO-0662DPG99B","price":56.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-0662DPG99B__64072.1722371083.500.750.jpg?v=1785188539"},{"product_id":"perko-0571dp4blk-gas-tank-vent-with-swivel-elbow-90-degree-black-splash-guard-5-8-hose-flame-arrestor","title":"Perko 0571DP4BLK 90 Degree Black Gas Tank Vent with Swivel Elbow","description":"\u003cp\u003eThe Perko 0571DP4BLK is a 90 degree angled gas tank vent fitting with a swivel elbow, built for venting gasoline fuel tanks on boats. The zinc alloy elbow rotates to any position, so it can be aimed to keep water and spray away from the vent opening regardless of how the through-hull is oriented. A black polymer splash guard cap covers the vent opening, and a removable 30 mesh stainless steel wire screen flame arrestor is built in for use with gasoline applications, helping prevent flame or spark intrusion into the fuel system while still allowing the tank to vent properly.\u003c\/p\u003e\u003cp\u003eThis vent is sized for 5\/8 inch hose and is designed for hulls up to 3\/4 inch in maximum thickness. It is a universal-fit deck vent, suitable for gasoline-powered boats where a compact, rotatable vent elbow with an integrated flame arrestor screen is needed. The removable screen design allows the flame arrestor mesh to be cleaned or replaced without removing the whole fitting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0571DP4BLK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Gas Tank Vent with Swivel Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElbow Angle:\u003c\/strong\u003e 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Type:\u003c\/strong\u003e Retail package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc alloy elbow, black polymer splash guard cap, stainless steel flame arrestor screen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlame Arrestor Screen:\u003c\/strong\u003e Removable 30 mesh stainless steel wire screen (for gasoline applications)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Hull Thickness:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6.75 x 3 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226021862\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for gasoline-powered boats; sized for 5\/8 inch vent hose and hulls up to 3\/4 inch maximum thickness. The elbow rotates to any position for mounting flexibility.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the Perko 0571DP4BLK gas tank vent use?\u003c\/strong\u003e The Perko 0571DP4BLK is sized for 5\/8 inch hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the elbow on this vent be repositioned after installation?\u003c\/strong\u003e Yes, the 90 degree zinc alloy elbow on the 0571DP4BLK is designed to rotate to any position, allowing the vent opening to be aimed away from water spray after mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 0571DP4BLK splash guard cap?\u003c\/strong\u003e It has a black polymer splash guard cap, matching the black finish of part number 0571DP4BLK.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this vent fitting made for gasoline or diesel tanks?\u003c\/strong\u003e The 0571DP4BLK's flame arrestor screen is designed for use with gasoline applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flame arrestor screen made of?\u003c\/strong\u003e A removable 30 mesh stainless steel wire screen serves as the flame arrestor in the Perko 0571DP4BLK vent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the flame arrestor screen replaceable or removable for cleaning?\u003c\/strong\u003e Yes, the 30 mesh stainless steel wire screen in the 0571DP4BLK is removable, so it can be taken out for cleaning or replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum hull thickness this vent fitting is designed for?\u003c\/strong\u003e The Perko 0571DP4BLK is designed for a maximum hull thickness of 3\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 0571DP4BLK vent?\u003c\/strong\u003e The item measures 6.75 x 3 x 1.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Perko 0571DP4BLK weigh?\u003c\/strong\u003e The Perko 0571DP4BLK gas tank vent weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this vent fit a specific boat make or engine?\u003c\/strong\u003e No, the 0571DP4BLK is a universal-fit gas tank vent, not tied to a specific boat make, model, or engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 0571DP4BLK and the straight-style Perko vent?\u003c\/strong\u003e The 0571DP4BLK uses a 90 degree angled elbow, while Perko's straight-style vent in the same black retail package is a separate part number with a straight elbow instead of an angled one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the elbow body made from?\u003c\/strong\u003e The elbow body on the 0571DP4BLK is zinc alloy, paired with a black polymer splash guard cap and a stainless steel flame arrestor screen.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991107842267,"sku":"PKO-0571DP4BLK","price":17.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/414QEWSIDhL.jpg?v=1784491721"},{"product_id":"perko-1270dpwchr-water-deck-fill-chrome-plated-brass-1-1-2-hose-fig-1270","title":"Perko Water Deck Fill, Chrome-Plated Brass, for 1-1\/2 Inch Hose - 1270DPWCHR","description":"\u003cp\u003eThe Perko 1270DPWCHR is a water deck fill designed to accept a 1-1\/2 inch hose, letting you fill your boat's fresh water tank from the deck. It is built from brass with a chrome-plated exterior finish for a durable, corrosion-resistant look on deck hardware that is regularly exposed to sun and saltwater. This deck fill is part of Perko's non-EPA, non-vented deck fill line sized for 1-1\/2 inch hose, matching the fitting to the tank hose diameter commonly used on water fill lines. The unit carries the Perko part number 1270DPWCHR and is identified by UPC 085226023927. It is a straightforward, functional piece of deck hardware intended for owners replacing a worn, cracked, or missing water deck fill, or outfitting a new water fill line during a boat build or refit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1270DPWCHR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Water Deck Fill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1.5 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Chrome-plated brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Non-EPA, Non-Vented\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 12 x 12 x 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.72 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226023927\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 085226023927\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the Perko 1270DPWCHR fit?\u003c\/strong\u003e The Perko 1270DPWCHR is sized for a 1-1\/2 inch hose, matching the standard diameter used on water fill lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 1270DPWCHR used for?\u003c\/strong\u003e It is a deck fill fitting used to fill a boat's fresh water tank from the deck, connecting to a 1-1\/2 inch water hose run below deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1270DPWCHR vented?\u003c\/strong\u003e No, the 1270DPWCHR is part of Perko's non-EPA, non-vented deck fill line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Perko 1270DPWCHR have?\u003c\/strong\u003e It has a chrome-plated brass exterior finish, chosen for corrosion resistance in a marine deck environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Perko 1270DPWCHR weigh?\u003c\/strong\u003e The Perko 1270DPWCHR water deck fill weighs 0.72 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Perko 1270DPWCHR made of?\u003c\/strong\u003e The 1270DPWCHR is made of brass with a chrome-plated finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Perko 1270DPWCHR?\u003c\/strong\u003e The UPC for the Perko 1270DPWCHR water deck fill is 085226023927.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 1270DPWCHR work for fuel or waste lines?\u003c\/strong\u003e No, the 1270DPWCHR is designated as a water deck fill; Perko offers separate gas, diesel, and waste deck fill versions for those applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1270DPWCHR come with mounting hardware?\u003c\/strong\u003e The dossier for the 1270DPWCHR does not list included mounting hardware, so buyers should confirm fastener needs separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1270DPWCHR genuine Perko or aftermarket?\u003c\/strong\u003e The 1270DPWCHR is a genuine Perko part, identified by Perko's own part number and UPC 085226023927.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991121277147,"sku":"PKO-1270DPWCHR","price":49.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41Tk-x30VnL.jpg?v=1784492052"},{"product_id":"perko-1270dpg99a-gas-deck-fill-replacement-cap-with-o-ring-and-retainer-zinc-alloy-non-vented","title":"Perko Gas Cap with O-Ring and Retainer, Fig. 1270 Deck Fill Replacement Cap 1270DPG99A","description":"\u003cp\u003eThe Perko 1270DPG99A is a Fig. 1270 gas deck fill replacement cap, sold complete with its O-ring and retainer. It is designed to replace a worn, cracked, or missing cap on a Perko Fig. 1270 gas deck plate, restoring a tight seal at the deck fitting where fuel is loaded into the boat's tank. The cap is made of zinc alloy with a zinc finish and a black color, giving it corrosion resistance for exposure to salt air, spray, and deck traffic. It uses a twist-on closure, so it threads and seats onto the deck plate body without tools for everyday use, while the included O-ring provides the seal against water intrusion and the retainer keeps the cap captive to the fitting.\u003c\/p\u003e\u003cp\u003eThis cap is intended for the gas (fuel) version of the Fig. 1270 deck plate line; Perko also offers matching Diesel and Water caps with O-ring and retainer for the same deck plate body, so boat owners should confirm they are ordering the gas-marked cap for a fuel fill. Replacement O-rings for this cap are also available separately from Perko, and a deck plate key is offered for opening and closing Fig. 1270\/1269 deck plate caps. This is a functional replacement part for maintaining a watertight fuel deck fill, not a full deck plate assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1270DPG99A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Fig. 1270 Gas Cap with O-Ring and Retainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6 x 3 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Twist-On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Cap, O-Ring, and Retainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluid Type:\u003c\/strong\u003e Gas (Fuel)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Perko Fig. 1270 gas deck plate assemblies.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are published for this part; it is ordered directly by its Perko part number, 1270DPG99A.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 1270DPG99A?\u003c\/strong\u003e It is a Fig. 1270 gas deck fill replacement cap from Perko, sold with its O-ring and retainer included, designed to replace the cap on a Perko gas deck plate fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cap include the O-ring and retainer?\u003c\/strong\u003e Yes, the Perko 1270DPG99A ships as a complete cap assembly with both the O-ring and the retainer, so no separate hardware needs to be sourced to install it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cap for gas, diesel, or water fills?\u003c\/strong\u003e The 1270DPG99A is the gas version of Perko's Fig. 1270 cap line. Perko also makes a matching diesel cap (1270DPD99A) and water cap (1270DPW99A) that share the same deck plate body but are separate part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the cap made from?\u003c\/strong\u003e The Perko 1270DPG99A is made of zinc alloy with a zinc exterior finish, in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Perko 1270DPG99A cap?\u003c\/strong\u003e Item dimensions are 6 x 3 x 1 inches, and the cap weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cap attach to the deck plate?\u003c\/strong\u003e It uses a twist-on closure that threads onto the Fig. 1270 deck plate body and is held captive by the included retainer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre replacement O-rings available separately for this cap?\u003c\/strong\u003e Yes, Perko sells O-rings for the Fig. 1270 and 1269 cap line separately, packaged two per bag, for owners who only need to replace a worn seal rather than the whole cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a special tool needed to open or close this cap?\u003c\/strong\u003e Perko offers a deck plate key for opening and closing Fig. 1270 and Fig. 1269 deck plate caps, sold separately from the 1270DPG99A cap itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cap fit a Fig. 1269 waste deck plate?\u003c\/strong\u003e No, the 1270DPG99A is made for the Fig. 1270 gas deck plate; Perko's Fig. 1269 waste deck plate uses its own cap with O-ring (1269DP099A).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1270DPG99A a genuine Perko part?\u003c\/strong\u003e Yes, 1270DPG99A is Perko's own manufacturer part number for this gas cap with O-ring and retainer, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this cap come in?\u003c\/strong\u003e The Perko 1270DPG99A gas deck fill cap is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cap fit a specific boat make or year?\u003c\/strong\u003e The 1270DPG99A is a universal-fit replacement cap sized for Perko's Fig. 1270 gas deck plate fitting rather than a specific boat make, model, or year.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991121309915,"sku":"PKO-1270DPG99","price":23.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-1270DPG99_lg__76991.1722350760.500.750.jpg?v=1785188647"},{"product_id":"perko-1318dpgblk-vented-gas-fill-with-35-degree-angled-neck-for-1-1-2-hose-black-polymer-flip-top-deck-fill","title":"Perko 1318DPGBLK Vented Gas Deck Fill, 35 Degree Angled Neck, Black, 1.5 Inch Hose","description":"\u003cp\u003eThe Perko 1318DPGBLK is a vented gas deck fill built for topside fuel filling on boats, featuring a 35 degree angled neck and black plastic construction. It is designed for O.E.M. Use and connects to a 1.5 inch fuel fill hose. The fill uses a hinged flip-top cap that seals the opening when not in use, and it incorporates an integral tank vent with a flame arrestor, allowing continuous venting of the fuel tank while helping to prevent water intrusion into the fill neck. Construction is all plastic, so no ground wire is required for installation, simplifying the mounting process compared to metal deck fills. Perko offers this fill in a retail package format, and it does not require a deck plate key to open or close, making day-to-day fueling straightforward for the boat owner. The angled 35 degree neck design distinguishes it from Perko's straight-neck gas and water fill variants in the same product line, making it suited to installations where a straight vertical fill is not practical. This is a gasoline fill fitting, not intended for water fill applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1318DPGBLK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Vented Gas Fill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeck Style:\u003c\/strong\u003e 35 Degree Angled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Type:\u003c\/strong\u003e Retail Package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 10.24 x 6.26 x 3.74 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.43125 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Plate Key:\u003c\/strong\u003e Not Required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226343575\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 1318DPGBLK used for?\u003c\/strong\u003e It is a vented gas deck fill for boats, designed for O.E.M. Topside fuel filling with a 35 degree angled neck that connects to a 1.5 inch fill hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1318DPGBLK require a deck plate key to open?\u003c\/strong\u003e No, the 1318DPGBLK does not require a deck plate key; it uses a hinged flip-top cap instead of a keyed deck plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this Perko gas fill?\u003c\/strong\u003e The 1318DPGBLK is finished in black, and Perko also offers straight-neck gas fills in the same line in black or white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1318DPGBLK for gasoline or water fills?\u003c\/strong\u003e This part is a gasoline fill; Perko sells separate straight-neck water fill parts (1319DPWBLK and 1319DPWWHT) for water fill applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the Perko 1318DPGBLK fit?\u003c\/strong\u003e The 1318DPGBLK connects to a 1.5 inch fuel fill hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 1318DPGBLK made of?\u003c\/strong\u003e It is made of all plastic construction, black in color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1318DPGBLK need a ground wire connected during installation?\u003c\/strong\u003e No ground wire is required for the Perko 1318DPGBLK because it is an all-plastic fill fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1318DPGBLK weigh?\u003c\/strong\u003e The Perko 1318DPGBLK weighs 0.43125 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 1318DPGBLK gas fill?\u003c\/strong\u003e Item dimensions are 10.24 x 6.26 x 3.74 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1318DPGBLK have a vent to prevent tank pressure buildup?\u003c\/strong\u003e Yes, it includes an integral tank vent with a flame arrestor for continuous venting while helping prevent water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 1318DPGBLK and 1319DPGBLK?\u003c\/strong\u003e The 1318DPGBLK has a 35 degree angled neck, while the 1319DPGBLK is the straight-neck version of the same black gas fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1318DPGBLK sold as a retail package?\u003c\/strong\u003e Yes, the 1318DPGBLK is packaged as a retail package item.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991121768667,"sku":"PKO-1318DPGBLK","price":29.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/1318DPGBLK__15994.1737841660.500.750.jpg?v=1785188593"},{"product_id":"perko-1319dpgblk-straight-neck-combination-gas-fill-and-tank-vent-black-all-plastic-flip-top-with-flame-arrestor","title":"Perko 1319DPGBLK Straight Neck Vented Gas Deck Fill, Black","description":"\u003cp\u003eThe Perko 1319DPGBLK is a straight-neck, vented gas deck fill designed to replace the deck-mounted fill fitting on a boat's fuel system. It combines a flip-top gas fill with an integral tank vent in one fitting, so a separate vent fitting is not required. The molded flip-top lid opens for fueling and closes flush against the deck when not in use.\u003c\/p\u003e\u003cp\u003eContinuous venting is built into the fitting to relieve tank pressure while helping prevent water intrusion into the fuel tank. A flame arrestor is built into the gas version of this fitting for added safety at the fill point. The 1319DPGBLK is made entirely of plastic, which eliminates the need for the grounding wire that metal deck fills require, and a deck plate key is not needed to open or close it. The fitting is finished in black and meets USCG Safety Standards effective January 31, 1997.\u003c\/p\u003e\u003cp\u003eThis is the straight-neck configuration (Perko Fig. 1319); a 35-degree angled-neck version is also available as a separate part number for installations where deck space or hose routing calls for an angled fitting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1319DPGBLK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeck Style:\u003c\/strong\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5 x 2.5 x 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.375 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226040344\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Plate Key Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlame Arrestor:\u003c\/strong\u003e Included (gas version)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e Meets USCG Safety Standards effective 1\/31\/97\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 1319DPGBLK used for?\u003c\/strong\u003e The 1319DPGBLK is a deck-mounted gas fill fitting with a flip-top lid and a built-in tank vent, installed at the fuel fill point on a boat's deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1319DPGBLK include a vent, or do I need a separate vent fitting?\u003c\/strong\u003e No separate vent fitting is needed. The Perko 1319DPGBLK combines the gas fill and the tank vent into a single fitting with continuous venting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this deck fill?\u003c\/strong\u003e The 1319DPGBLK is finished in black. Perko also offers the same straight-neck gas fill in white as part number 1319DPGWHT if a different color is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the straight-neck or angled-neck version?\u003c\/strong\u003e 1319DPGBLK is the straight-neck gas deck fill (Perko Fig. 1319). Perko's Fig. 1318 is the 35-degree angled-neck gas version, sold under a different part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a deck plate key to open this fill?\u003c\/strong\u003e No. The Perko 1319DPGBLK has a flip-top lid and does not require a deck plate key to open or close.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 1319DPGBLK made of?\u003c\/strong\u003e It is made entirely of plastic. This all-plastic construction eliminates the need for the ground wire that a metal deck fill would require.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this deck fill have a flame arrestor?\u003c\/strong\u003e Yes, the gas version of the 1319DPGBLK includes a built-in flame arrestor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the 1319DPGBLK?\u003c\/strong\u003e The Perko 1319DPGBLK measures 5 x 2.5 x 0.75 inches and weighs 0.375 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1319DPGBLK for gas or water fill applications?\u003c\/strong\u003e This part number is the gas fill version. Perko also makes a straight-neck water fill fitting in the same style, listed under separate part numbers (1319DPWBLK in black, 1319DPWWHT in white).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat safety standard does this fitting meet?\u003c\/strong\u003e The Perko 1319DPGBLK meets USCG Safety Standards effective January 31, 1997.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 1319DPGBLK?\u003c\/strong\u003e The 1319DPGBLK is the complete straight-neck gas deck fill assembly with flip-top lid, integral vent, and flame arrestor, ready for deck installation.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991121801435,"sku":"PKO-1319DPGBLK","price":29.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-1319DPGBLK_lg__69015.1558116118.500.750.jpg?v=1785188086"},{"product_id":"perko-1319dpgwht-vented-straight-neck-gas-fill-with-integral-tank-vent-white-1-5-hose","title":"Perko 1319DPGWHT Vented Straight Neck Gas Fill, White, for 1.5 Inch Hose","description":"\u003cp\u003eThe Perko 1319DPGWHT is a combination gas fill and tank vent built for boats using 1.5 inch fuel fill hose. It has a straight neck design with a white plastic body, making it a low-profile deck fitting that mounts flush for a clean finish on the hull or transom. The fitting combines the fill port and tank vent into a single unit, so no separate vent fitting is needed on the tank.\u003c\/p\u003e\u003cp\u003eA hinged flip-top cap keeps the fill opening covered when not in use, while an integral tank vent with a built-in flame arrestor allows continuous venting of the fuel tank while helping prevent water intrusion into the fuel system. Because it is molded from plastic rather than metal, no ground wire or bonding strap is required for installation, and no deck plate key is needed to open or close the cap. Installation is straightforward, connecting directly to 1.5 inch fill hose at the neck.\u003c\/p\u003e\u003cp\u003eThis fitting is intended for gasoline fuel systems only, given the built-in flame arrestor. It is sold as the white, straight-neck, gas version; the same body style is also offered in black, and in a water-fill version for fresh or waste water tanks, as separate part numbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1319DPGWHT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Fill \/ Tank Vent (Combination)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeck Style:\u003c\/strong\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlame Arrestor:\u003c\/strong\u003e Yes (gas use only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Plate Key Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround Wire Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226040351\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 1319DPGWHT used for?\u003c\/strong\u003e It is a combination gas fill and tank vent that lets you fuel the boat's gasoline tank while the same fitting continuously vents the tank through a built-in flame arrestor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does this fitting take?\u003c\/strong\u003e The 1319DPGWHT is built for 1.5 inch fill hose, connecting at the straight neck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a deck plate key needed to open the cap?\u003c\/strong\u003e No. The Perko 1319DPGWHT uses a hinged flip-top cap, so no deck plate key is required to access the fill opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fitting need a ground wire?\u003c\/strong\u003e No ground wire is required for the 1319DPGWHT since it is a plastic (non-metallic) fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this gas fill?\u003c\/strong\u003e The 1319DPGWHT is the white version of Perko's straight-neck gas fill; the same fitting is also made in black under a different part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fitting be used on a water tank instead of a fuel tank?\u003c\/strong\u003e No. The 1319DPGWHT is the gas version with a flame arrestor and is intended for gasoline systems; Perko offers a separate straight-neck water fill\/vent fitting for water tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fitting made of?\u003c\/strong\u003e The Perko 1319DPGWHT gas fill is made of plastic construction throughout the body and cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it have an angled or straight neck?\u003c\/strong\u003e The 1319DPGWHT has a straight neck; Perko's angled-neck version of this gas fill is a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this part weigh?\u003c\/strong\u003e The Perko 1319DPGWHT weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fill fitting prevent water from getting into the fuel tank?\u003c\/strong\u003e Yes. The hinged cap and integral vent design on the 1319DPGWHT are built to provide continuous tank venting while helping prevent water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the flame arrestor built in or a separate part?\u003c\/strong\u003e The flame arrestor is integral to the tank vent on the 1319DPGWHT gas fill, not a separate add-on component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 1319DPGWHT?\u003c\/strong\u003e The Perko 1319DPGWHT ships as a single complete gas fill and tank vent fitting with its hinged cap attached.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991121834203,"sku":"PKO-1319DPGWHT","price":29.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-1319DPGWHT__46091.1722494293.500.750.jpg?v=1785188312"},{"product_id":"perko-1313dp0chr-chrome-plated-gas-deck-fill-for-1-1-2-inch-pipe-non-vented-cast-bronze-fuel-fill","title":"Perko 1313DP0CHR Non-Vented Gas Deck Fill, 1-1\/2 Inch Chrome Plated Cast Bronze","description":"\u003cp\u003eThe Perko 1313DP0CHR is a non-vented gas deck fill designed to be mounted in the deck of a boat for filling the gasoline fuel tank from above. It is built from cast bronze and finished in chrome plating, giving it a durable, corrosion-resistant surface for continued exposure to marine conditions and deck traffic. The fitting is sized for 1-1\/2 inch pipe and threads into the boat's fuel fill hose or pipe run beneath the deck.\u003c\/p\u003e\u003cp\u003eAs a non-vented, non-EPA deck fill for pipe, this Perko fitting is intended for gasoline fuel systems and meets U.S.C.G. Safety Standards of January 31, 1977 for gasoline fuel systems under 33 CFR 183. It does not meet the requirements of 40 CFR 1060 subpart B Emissions Standards and Related Requirements, so it should not be used where those emissions standards apply. The cap and body design is covered under Patent No. 3,828,714. Replacement caps and o-rings for this deck fill series are available separately from Perko for ongoing maintenance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1313DP0CHR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Gas Fill 1-1\/2 Inch Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Non-Vented Deck Fill for Pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Plain or Chrome Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Size:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3 x 5 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.53 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatent Number:\u003c\/strong\u003e 3,828,714\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety Standard Compliance:\u003c\/strong\u003e U.S.C.G. Safety Standards, January 31, 1977, for Gasoline Fuel Systems, 33 CFR 183\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmissions Standard Note:\u003c\/strong\u003e Does not meet 40 CFR 1060 subpart B Emissions Standards and Related Requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226396779\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 1313DP0CHR used for?\u003c\/strong\u003e It is a non-vented gas deck fill, mounted in the boat's deck to allow fueling the gasoline tank from above through a 1-1\/2 inch pipe connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size pipe does this deck fill work with?\u003c\/strong\u003e The Perko 1313DP0CHR is sized for 1-1\/2 inch pipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Perko 1313DP0CHR made from?\u003c\/strong\u003e It is made from cast bronze, finished in chrome plating for corrosion resistance and a polished appearance on deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this deck fill vented or non-vented?\u003c\/strong\u003e The 1313DP0CHR is a non-vented deck fill for pipe, not a vented fill fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this deck fill meet U.S. Coast Guard fuel system standards?\u003c\/strong\u003e Yes, this Perko gas deck fill meets U.S.C.G. Safety Standards of January 31, 1977 for gasoline fuel systems under 33 CFR 183.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1313DP0CHR meet current EPA emissions standards?\u003c\/strong\u003e No, this fitting does not meet the requirements of 40 CFR 1060 subpart B Emissions Standards and Related Requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does the 1313DP0CHR come in?\u003c\/strong\u003e This part number is finished in chrome plating; the underlying cast bronze fitting is also available in a plain, unplated finish as a separate option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Perko 1313DP0CHR weigh?\u003c\/strong\u003e It weighs 0.53 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this deck fill?\u003c\/strong\u003e The Perko 1313DP0CHR measures 3 x 5 x 8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I get replacement parts for the 1313DP0CHR cap?\u003c\/strong\u003e Yes, Perko offers replacement caps with o-ring and retainer, as well as o-rings, as separately orderable spare parts for this deck fill series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko 1313DP0CHR suitable for diesel fuel systems?\u003c\/strong\u003e This deck fill is designed and rated for gasoline fuel systems, not diesel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the fitting a genuine Perko part?\u003c\/strong\u003e Yes, the 1313DP0CHR is a genuine Perko-manufactured non-vented gas deck fill, not an aftermarket equivalent.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991121866971,"sku":"PKO-1313DPCHR","price":29.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-1313DPCHR_lg__52575.1558116044.500.750.jpg?v=1785188127"},{"product_id":"perko-1324dp1blk-locking-gas-cap-with-o-ring-for-1-1-2-non-vented-fuel-fills-black","title":"Perko 1324DP1BLK Locking Fuel Fill Cap, 1-1\/2 Inch Non-Vented, Fits Perko Fills 0520, 0527, 0528, 0557, 0599, 1270","description":"\u003cp\u003eThe Perko 1324DP1BLK is a locking fuel fill cap built for 1-1\/2 inch non-vented deck fills. It is molded from black polymer materials and includes a gasket\/O-ring for a secure seal against the fill body, plus a built-in lock cylinder with a cover over the key hole to keep the key slot protected from spray and debris. Two keys are included with the cap.\u003c\/p\u003e\u003cp\u003eThe cap's outside thread diameter is 1-7\/8 inches, and it is designed to thread into and lock onto Perko's non-vented fill housings rather than vented fill assemblies. Locking the fuel fill helps deter unauthorized access to the fuel tank and keeps the fill closed against water intrusion at the deck fitting. Because it is intended for non-vented fills, it should not be paired with a vented fill housing that requires a separate breathing path.\u003c\/p\u003e\u003cp\u003eThis cap is compatible with several Perko deck fill units, letting boat owners standardize on one locking cap style across multiple fill locations that use the same non-vented fill design.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1324DP1BLK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Locking Fuel Fill Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFill Size Compatibility:\u003c\/strong\u003e 1-1\/2 inches (non-vented)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Thread Diameter:\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Locking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polymer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeys Included:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Perko Fill Models:\u003c\/strong\u003e 0520, 0527, 0528, 0557, 0599, 1270\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6 x 3 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.18 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226364495\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePerko Fill 0520\u003c\/li\u003e\n\u003cli\u003ePerko Fill 0527\u003c\/li\u003e\n\u003cli\u003ePerko Fill 0528\u003c\/li\u003e\n\u003cli\u003ePerko Fill 0557\u003c\/li\u003e\n\u003cli\u003ePerko Fill 0599\u003c\/li\u003e\n\u003cli\u003ePerko Fill 1270\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size fill does the Perko 1324DP1BLK fit?\u003c\/strong\u003e It fits 1-1\/2 inch non-vented fuel fills; the cap's outside thread diameter is 1-7\/8 inches, so it will not thread onto a vented fill housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1324DP1BLK cap lockable?\u003c\/strong\u003e Yes, the Perko 1324DP1BLK has a built-in lock cylinder with a cover over the key hole, and two keys are included with the cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Perko fills is this cap compatible with?\u003c\/strong\u003e The 1324DP1BLK is compatible with Perko fill models 0520, 0527, 0528, 0557, 0599, and 1270.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the cap made from?\u003c\/strong\u003e Black polymer materials are used for the 1324DP1BLK cap body, and it includes a gasket\/O-ring for sealing against the fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many keys come with the Perko 1324DP1BLK?\u003c\/strong\u003e Two keys are included with the locking cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cap be used on a vented fuel fill?\u003c\/strong\u003e No, the 1324DP1BLK is designed for non-vented fills only; it is not intended for use on vented fill housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 1324DP1BLK cap?\u003c\/strong\u003e This cap is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of this cap?\u003c\/strong\u003e The Perko 1324DP1BLK measures 6 x 3 x 2 inches and weighs 0.18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1324DP1BLK come with a gasket?\u003c\/strong\u003e Yes, the locking gas cap includes a gasket\/O-ring for a proper seal at the fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outside thread diameter of this cap?\u003c\/strong\u003e The outside thread diameter of the Perko 1324DP1BLK is 1-7\/8 inches.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991121899739,"sku":"PKO-1324DP1BLK","price":42.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-1324DP1BLK_lg__40556.1722370831.500.750.jpg?v=1785188145"},{"product_id":"perko-1324dp0blk-locking-gas-cap-black-polymer-keyed-fuel-fill-cap-for-1-1-2-non-vented-fills-fits-perko-1313-1399","title":"Perko 1324DP0BLK Locking Gas Cap for 1-1\/2 Inch Non-Vented Fills, Black, Fits Fills 1313 and 1399","description":"\u003cp\u003eThe Perko 1324DP0BLK is a locking gas cap engineered for use with 1-1\/2 inch non-vented fuel fills. Molded from black polymer, the cap includes a gasket to seal against the fill neck and a built-in lock cylinder with a cover over the key hole to protect against tampering and keep the lock mechanism free of debris. The cap's outside thread diameter measures 1-15\/32 inches, matching it to Perko's 1313 and 1399 fill fittings.\u003c\/p\u003e\u003cp\u003eBecause this is a non-vented cap, it is intended for fuel fill applications where venting is handled separately rather than through the cap itself. The locking feature gives boat owners a way to secure the fuel fill against unauthorized access while at the dock or in storage. Perko backs the cap with a 5 year limited warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1324DP0BLK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polymer (plastic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use With:\u003c\/strong\u003e 1-1\/2 inch non-vented fills\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Fill Models:\u003c\/strong\u003e Perko 1313 and 1399\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Outside Thread Diameter:\u003c\/strong\u003e 1-15\/32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Built-in lock cylinder with cover over key hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.17 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226029707\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 year limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePerko fill 1313\u003c\/li\u003e\n\u003cli\u003ePerko fill 1399\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size fill does the Perko 1324DP0BLK fit?\u003c\/strong\u003e The 1324DP0BLK is sized for 1-1\/2 inch non-vented fuel fills, with a cap outside thread diameter of 1-15\/32 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cap lock?\u003c\/strong\u003e Yes, the 1324DP0BLK has a built-in lock cylinder with a cover over the key hole to protect the mechanism and deter tampering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Perko fill fittings is this cap compatible with?\u003c\/strong\u003e It fits Perko fills 1313 and 1399.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1324DP0BLK a vented or non-vented cap?\u003c\/strong\u003e It is a non-vented cap, designed for fuel fill setups that handle venting separately rather than through the cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the cap made from?\u003c\/strong\u003e Black polymer with a gasket for sealing against the fill neck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cap come with a gasket?\u003c\/strong\u003e Yes, the Perko 1324DP0BLK includes a gasket as part of the cap assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1324DP0BLK weigh?\u003c\/strong\u003e 0.17 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 1324DP0BLK cap?\u003c\/strong\u003e Black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty does Perko offer on this cap?\u003c\/strong\u003e A 5 year limited warranty covers the 1324DP0BLK.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cap be used on a vented fuel fill?\u003c\/strong\u003e No, the 1324DP0BLK is built for 1-1\/2 inch non-vented fills, not vented fill applications.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991121998043,"sku":"PKO-1324DP0BLK","price":40.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-1324DP0BLK_lg__36678.1558116168.500.750.jpg?v=1785188442"},{"product_id":"perko-1399dp0chr-locking-gas-deck-fill-for-1-1-2-hose-black-polymer-cap-and-flange-with-2-keys","title":"Perko 1399DP0CHR Locking Gas Deck Fill for 1-1\/2 Inch Hose, Chrome-Plated Cap","description":"\u003cp\u003eThe Perko 1399DP0CHR is a locking gas deck fill (Perko Fig. 1399) built to seal and secure the fuel fill point on a boat while keeping the hose connection out of sight below deck. The body and cap are made from fiber reinforced, U.V. Stabilized polymer for long-term resistance to sun, salt spray, and repeated handling, with a chrome-plated finish on the visible cap and flange for a clean, corrosion-resistant look on deck. Unlike a standard non-locking fill, the 1399DP0CHR uses a key-hole cover over the cap so the fill can be locked to deter fuel theft or tampering while docked or in storage.\u003c\/p\u003e\u003cp\u003eIt is designed for 1-1\/2 inch fill hose, with a neck length of 1-7\/8 inches and a mounting hole diameter of 2-1\/8 inches, and it installs using #6 screws through the flange. A cap retainer and gasket are included with the fill so it is ready to mount and seal against the deck without sourcing separate hardware. This is a non-vented gas fill, meaning it is intended strictly for fuel fill applications rather than tank venting. Because it is a locking design, boat owners replacing a lost key, upgrading from a non-locking fill, or matching an existing Perko Fig. 1399 installation can order the 1399DP0CHR as the correct locking gas deck fill for a 1-1\/2 inch hose.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1399DP0CHR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Locking Gas Fill (Fig. 1399)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fiber Reinforced, U.V. Stabilized Polymer Body and Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Locking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeck Length:\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Size:\u003c\/strong\u003e #6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Cap Retainer and Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 7.36 x 4.76 x 3.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.65 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226020230\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the Perko 1399DP0CHR fit?\u003c\/strong\u003e The Perko 1399DP0CHR is built for 1-1\/2 inch fill hose, with a neck length of 1-7\/8 inches to accept that hose size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this gas fill lock?\u003c\/strong\u003e Yes, the 1399DP0CHR is Perko's locking version of the Fig. 1399 gas fill, using a cover over the key hole so the cap can be secured against tampering or fuel theft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mounting hole diameter for this deck fill?\u003c\/strong\u003e The mounting hole diameter for the 1399DP0CHR is 2-1\/8 inches, and it mounts to the deck using #6 screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 1399DP0CHR made of?\u003c\/strong\u003e It is made from fiber reinforced, U.V. Stabilized polymer for both the body and cap, with a chrome-plated finish on the visible surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fill vented or non-vented?\u003c\/strong\u003e The 1399DP0CHR is a non-vented gas fill, meaning it is intended for the fuel fill connection rather than tank venting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Perko 1399DP0CHR?\u003c\/strong\u003e The 1399DP0CHR comes with a cap retainer and gasket included, so no separate sealing hardware needs to be purchased.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 1399DP0CHR weigh?\u003c\/strong\u003e The Perko 1399DP0CHR gas deck fill weighs 0.65 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of this deck fill?\u003c\/strong\u003e The 1399DP0CHR ships in a package measuring 7.36 x 4.76 x 3.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I get a non-locking version of this same fill?\u003c\/strong\u003e Yes, Perko's Fig. 1399 line also includes a non-locking gas fill (Fig. 1313) for the same 1-1\/2 inch hose, sold as a separate part number from the locking 1399DP0CHR.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat screw size is used to install the 1399DP0CHR?\u003c\/strong\u003e Installation of the 1399DP0CHR uses #6 screws through the mounting flange.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1399DP0CHR suitable for gasoline fill applications?\u003c\/strong\u003e Yes, the 1399DP0CHR is a gas fill designed specifically for gasoline fuel systems, not water or waste tanks.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991122063579,"sku":"PKO-1399DPCHR","price":63.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-1399DPCHR_lg__09668.1558116563.500.750.jpg?v=1785188415"},{"product_id":"gen3-marine-316-stainless-steel-waste-deck-fill-with-locking-key-and-chain-1-1-2-inch-hose","title":"Gen3 Marine Stainless Steel Waste Deck Fill with Key - 1-1\/2 Inch Hose, 316 Stainless Steel","description":"\u003cp\u003eThe Gen3 Marine Waste Deck Fill is a 316 stainless steel deck fitting designed for routing waste discharge lines through a boat's deck. Corrosion-resistant 316 stainless steel construction stands up to marine environments and saltwater exposure, giving the fitting long-term durability where it is mounted. The cap is slotted and requires a key to open, adding a layer of security against unauthorized access to the waste line, and the cap stays attached to the deck fill by a chain so it cannot be dropped or lost overboard while the fitting is being filled or serviced. The fitting is built for a 1-1\/2 inch hose connection with a straight thread design. A key is included with the deck fill so it is ready to use for locking and unlocking the cap; installation hardware is sold separately and is not included with this deck fill. This is a compact, single-piece marine hardware fitting intended for waste tank plumbing on boats that route sanitation discharge lines to a deck-mounted fill point.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-9001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Waste Deck Fill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e Straight thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Type:\u003c\/strong\u003e Slotted cap, key-operated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Key and attachment chain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3 x 3 x 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037462296\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does this deck fill work with?\u003c\/strong\u003e The Gen3 Marine Waste Deck Fill (part number 5-9001) is built for a 1-1\/2 inch hose connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cap require a key to open?\u003c\/strong\u003e Yes, the cap on this waste deck fill is slotted and requires a key to open, and a key is included with the 5-9001 deck fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the cap be lost while removed from the deck fill?\u003c\/strong\u003e No, the cap on the 5-9001 waste deck fill is connected to the body by an attachment chain, so it stays with the fitting when removed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Gen3 Marine deck fill made from?\u003c\/strong\u003e It is made from 316 stainless steel, a corrosion-resistant grade suited to marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this deck fill?\u003c\/strong\u003e The 5-9001 deck fill measures 3-1\/4 inches in length and 3 inches in diameter, with overall item dimensions of 3 x 3 x 3.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this deck fill weigh?\u003c\/strong\u003e The Gen3 Marine Waste Deck Fill weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included?\u003c\/strong\u003e No, installation hardware is sold separately and is not included with the 5-9001 waste deck fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type does this deck fill use?\u003c\/strong\u003e This deck fill uses a straight thread design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this deck fill intended for waste or another fluid type?\u003c\/strong\u003e This is a waste deck fill, intended for routing sanitation\/waste discharge lines through the deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this product?\u003c\/strong\u003e The 5-9001 deck fill ships with the deck fill body, the slotted cap on its attachment chain, and a key for the cap.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991699140827,"sku":"GEN-5-9001","price":17.48,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/GEN-5-9001__28207.1722510056.500.750.jpg?v=1785164332"},{"product_id":"gen3-marine-3-stainless-steel-gas-deck-fill-with-locking-key-cap-316-ss-1-1-2-hose-5-9003","title":"Gen3 Marine 3 Inch Stainless Steel Gas Deck Fill with Locking Key and Chain","description":"\u003cp\u003eThe Gen3 Marine Gas Deck Fill is a 3 inch deck-mounted fuel fill built from 316 stainless steel for corrosion resistance and long-term durability in a marine environment. It is designed for gasoline fill applications and connects to a 1-1\/2 inch fuel fill hose, making it a straightforward replacement or upgrade for boat owners installing or refreshing their deck fill hardware.\u003c\/p\u003e\u003cp\u003eThe cap is slotted and requires a key to open, adding a layer of security against unauthorized access or tampering with the fuel system. The cap stays attached to the deck fill body by a chain, so it cannot be dropped overboard or misplaced while the tank is being filled. A key is included with the unit. The deck fill uses a straight thread connection and measures 3-1\/4 inches in length and 3 inches in diameter, with overall item dimensions of 3 x 3 x 3.25 inches.\u003c\/p\u003e\u003cp\u003eThis is a universal-fit deck fill intended for gasoline fuel systems using a 1-1\/2 inch hose connection. Installation hardware is sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-9003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Gas Deck Fill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e Straight Thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3 x 3 x 3.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Type:\u003c\/strong\u003e Slotted, keyed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment Chain Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037462319\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does this deck fill use?\u003c\/strong\u003e The Gen3 Marine 5-9003 gas deck fill connects to a 1-1\/2 inch fuel fill hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a key included with the deck fill?\u003c\/strong\u003e Yes, the Gen3 Marine 5-9003 deck fill ships with a key for the slotted locking cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the deck fill cap made of?\u003c\/strong\u003e 316 stainless steel is used for both the cap and body of the Gen3 Marine 5-9003 gas deck fill, giving it strong resistance to marine corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cap stay attached when removed?\u003c\/strong\u003e Yes, an attachment chain connects the cap to the deck fill body on the 5-9003 so it cannot be dropped or lost while fueling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuel type is this deck fill designed for?\u003c\/strong\u003e The Gen3 Marine 5-9003 is designed for gasoline fill applications, not diesel or water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the deck fill?\u003c\/strong\u003e The 5-9003 measures 3 inches in diameter and 3-1\/4 inches in length, with overall item dimensions of 3 x 3 x 3.25 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this deck fill fit any boat?\u003c\/strong\u003e The Gen3 Marine 5-9003 is a universal-fit gas deck fill that uses a straight thread and a 1-1\/2 inch hose connection, making it compatible with standard deck fill installations of that size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included?\u003c\/strong\u003e No, installation hardware is sold separately from the 5-9003 gas deck fill; the deck fill itself includes the cap, key, and attachment chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type does the 5-9003 use?\u003c\/strong\u003e A straight thread connection is used on the Gen3 Marine 5-9003 gas deck fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the deck fill weigh?\u003c\/strong\u003e The Gen3 Marine 5-9003 gas deck fill weighs 0.9 pounds.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991701401819,"sku":"GEN-5-9003","price":17.48,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/GEN-5-9003__82152.1722492633.500.750.jpg?v=1785164333"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/4803_285d83e3-8251-4c6d-9228-175eb33459c5.jpg?v=1785356976","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-engine-parts-systems-fuel-system-fuel-tanks-tank-hardware-fuel-tank-vents-caps-gaskets.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}