{"title":"Fuel Tanks \u0026 Tank Hardware","description":null,"products":[{"product_id":"shields-fire-acol-fuel-vent-hose-5-8-in-x-10-ft-uscg-type-a2-sierra-116-369-0583","title":"Sierra Shields Fire-Acol Fuel Vent Hose 16-369-0583, 5\/8 Inch x 10 Feet, USCG Type A2","description":"\u003cp\u003eThe Sierra Shields Fire-Acol Fuel Vent Hose (16-369-0583) is a 5\/8 inch inside diameter marine fuel vent hose supplied in a 10 foot Polypac length. It is built to resist gasoline and alcohol blended fuels and is fire resistant, making it suited for use as a fuel vent line on gasoline engines running fuels blended up to 85% ethanol as well as diesel fuel systems. The hose features a weather and UV resistant NBR\/PVC cover that protects the hose from marine environmental exposure over time.\u003c\/p\u003e\u003cp\u003eThis hose carries an inside diameter of 5\/8 inch (15.9 mm) and an outside diameter of 31\/32 inch (24.6 mm), with a maximum working pressure rating of 50 psi. It is rated for a temperature range of -20 degrees F to 160 degrees F. The hose meets USCG Type A2 requirements for pleasure boats, and meets SAE J1527 Type A2, ISO 7840 Type A2, and NMMA\/CE Type accepted standards, confirming its suitability for fuel vent line service on recreational boats.\u003c\/p\u003e\u003cp\u003eBecause it is a vent line hose rather than a fuel feed hose, it is intended for routing fuel tank vapor rather than pressurized fuel supply. It is sold as a single 10 foot length, ready to cut to the run required for the installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 16-369-0583\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter:\u003c\/strong\u003e 5\/8 inch (15.9 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 31\/32 inch (24.6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure:\u003c\/strong\u003e 50 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Class Code:\u003c\/strong\u003e C-25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.76 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e NBR\/PVC cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multicolored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e -20 degrees F to 160 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards Compliance:\u003c\/strong\u003e USCG Type A2, SAE J1527 Type A2, ISO 7840 Type A2, NMMA\/CE Type accepted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Fuel vent lines for gasoline up to 85% ethanol blended fuels and diesel fuel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFire Resistance:\u003c\/strong\u003e Resists gasoline\/alcohol blended fuel and is fire resistant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal marine fuel vent hose sized at 5\/8 inch inside diameter; no specific make, engine, or model fitment is specified.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the inside diameter of the Sierra 16-369-0583 fuel vent hose?\u003c\/strong\u003e The Sierra 16-369-0583 Shields Fire-Acol Fuel Vent Hose has a 5\/8 inch (15.9 mm) inside diameter and a 31\/32 inch (24.6 mm) outside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this hose?\u003c\/strong\u003e Part number 16-369-0583 is sold in a 10 foot length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose fire resistant?\u003c\/strong\u003e Yes, the Shields Fire-Acol Fuel Vent Hose is fire resistant and resists gasoline\/alcohol blended fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuels is this vent hose rated for?\u003c\/strong\u003e The 16-369-0583 hose is rated for gasoline blended fuels up to 85% ethanol, as well as diesel fuel, when used as a fuel vent line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can this hose handle?\u003c\/strong\u003e This hose is rated for a temperature range of -20 degrees F to 160 degrees F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum working pressure of this hose?\u003c\/strong\u003e The maximum working pressure for the 16-369-0583 fuel vent hose is 50 psi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hose material?\u003c\/strong\u003e The 16-369-0583 hose has an NBR\/PVC cover that is weather and UV resistant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hose meet marine safety standards?\u003c\/strong\u003e Yes, the Sierra Shields Fire-Acol Fuel Vent Hose meets USCG Type A2 requirements for pleasure boats, along with SAE J1527 Type A2, ISO 7840 Type A2, and NMMA\/CE Type accepted standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a fuel feed hose or a fuel vent hose?\u003c\/strong\u003e The 16-369-0583 is a fuel vent hose, designed for venting fuel tank vapor rather than supplying pressurized fuel feed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this hose weigh?\u003c\/strong\u003e The 10 foot length of the Sierra 16-369-0583 fuel vent hose weighs 2.76 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this hose?\u003c\/strong\u003e The Sierra 16-369-0583 fuel vent hose is multicolored.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part?\u003c\/strong\u003e Yes, part number 16-369-0583 is a genuine Sierra Shields Fire-Acol Fuel Vent Hose.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988019458267,"sku":"SIE-16-369-0583","price":41.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51hAucXKoqL.jpg?v=1784385303"},{"product_id":"sierra-18-2881-9-fuel-tank-housing-to-tank-gasket-replaces-johnson-evinrude-332403-fits-6-gallon-portable-fuel-tanks-pack-of-2","title":"Sierra 18-2881-9 Housing to Tank Gasket, Replaces 332403 125530, for 6 Gallon Fuel Tank, Pack of 2","description":"\u003cp\u003eThe Sierra 18-2881-9 Housing to Tank Gasket seals the connection between the fuel pickup housing and a 6 gallon outboard fuel tank, restoring a tight seal that prevents fuel leaks and air intrusion at the housing-to-tank joint. Each package contains 2 gaskets, giving you a spare or enough material to service two tanks in one order. This gasket is a direct fit replacement designed to meet or exceed the performance of the original equipment part it replaces, making it a straightforward swap during routine fuel system maintenance or when an old gasket has hardened, cracked, or lost its seal. Because a worn housing-to-tank gasket is a common source of fuel odor, weeping fuel, or a tank that will not hold pressure properly, replacing it with the correct Sierra part restores reliable operation without needing to replace the entire fuel tank housing assembly. The gasket is manufactured by Sierra International, a supplier of marine engine and fuel system parts, and is intended specifically for use with 6 gallon fuel tanks. Keep a package on hand as part of routine outboard fuel tank upkeep so a small, inexpensive gasket does not turn into a bigger fuel system problem.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2881-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Housing to Tank Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Pack of 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 6 Gallon Fuel Tank\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e6 Gallon Fuel Tank\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e332403\u003c\/li\u003e\n\u003cli\u003e125530\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2881-9 gasket fit?\u003c\/strong\u003e The Sierra 18-2881-9 Housing to Tank Gasket is made for 6 gallon fuel tanks, sealing the joint between the fuel pickup housing and the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets come in a package?\u003c\/strong\u003e Each package of the Sierra 18-2881-9 Housing to Tank Gasket contains 2 gaskets, sold as a pack of 2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich OEM part numbers does this gasket replace?\u003c\/strong\u003e This gasket replaces OEM numbers 332403 and 125530.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2881-9 gasket a genuine Sierra part or aftermarket?\u003c\/strong\u003e It is a genuine Sierra part manufactured by Sierra International, engineered to meet or exceed the performance of the original equipment gasket it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the gasket weigh?\u003c\/strong\u003e The Sierra 18-2881-9 Housing to Tank Gasket weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace the housing to tank gasket on my fuel tank?\u003c\/strong\u003e Replace the gasket if you notice fuel odor, visible leaking, or weeping at the housing-to-tank joint on a 6 gallon fuel tank, as these are signs the seal has hardened or worn out, which the Sierra 18-2881-9 is designed to fix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this gasket fit tanks other than a 6 gallon fuel tank?\u003c\/strong\u003e No, the Sierra 18-2881-9 Housing to Tank Gasket is specified for use with 6 gallon fuel tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of the 18-2881-9 gasket straightforward?\u003c\/strong\u003e Yes, it is a direct replacement gasket that installs at the housing-to-tank joint in place of the original gasket, requiring no modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-2881-9?\u003c\/strong\u003e An order of the Sierra 18-2881-9 includes one package containing 2 Housing to Tank Gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Sierra 18-2881-9 work as a replacement for a cracked or hardened original gasket?\u003c\/strong\u003e Yes, it is intended as a direct replacement for a worn, cracked, or hardened original housing-to-tank gasket on a 6 gallon fuel tank.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988132540635,"sku":"SIE-18-2881-9","price":7.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-2881-9__84599.1722359227.500.750.jpg?v=1785188168"},{"product_id":"fuel-tank-gasket-for-6-gallon-tank-replaces-oem-332403-125530-johnson-evinrude-sierra-18-2887-9-pack-of-2","title":"Sierra Fuel Tank Gasket 18-2887-9, Replaces 302557, Pack of 2","description":"\u003cp\u003eThe Sierra 18-2887-9 Fuel Tank Gasket is a replacement gasket built for Johnson and Evinrude fuel tank applications. It seals the connection at the fuel tank fitting to prevent fuel leaks and maintain a proper seal between mating surfaces, restoring the fit and function of the original equipment gasket it replaces. This gasket is sold as a package of two, so buyers have a spare on hand or enough to service two tanks in a single order.\u003c\/p\u003e\u003cp\u003eSierra manufactures this gasket to meet or exceed the performance of the original equipment part number it replaces, making it a straightforward drop-in replacement for Johnson and Evinrude fuel tanks that use the 302557 gasket. It is a lightweight, low-cost wear item that is worth replacing any time a fuel tank fitting is removed or serviced, since a worn or compressed gasket is a common source of small fuel leaks or a loose fuel tank seal.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2887-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Fuel Tank Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Pack of 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282163921\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eJohnson and Evinrude fuel tank applications\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e302557\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2887-9 fuel tank gasket fit?\u003c\/strong\u003e The 18-2887-9 fuel tank gasket is built for Johnson and Evinrude fuel tank applications, sealing the fuel tank fitting to prevent leaks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets come in a package of 18-2887-9?\u003c\/strong\u003e Each package of the Sierra 18-2887-9 fuel tank gasket contains 2 gaskets, so you have a spare or enough for two tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does 18-2887-9 replace?\u003c\/strong\u003e 18-2887-9 replaces OEM part number 302557 on applicable Johnson and Evinrude fuel tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-2887-9 gasket weigh?\u003c\/strong\u003e The 18-2887-9 fuel tank gasket weighs 0.13 pounds per package of 2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2887-9 gasket genuine OEM or aftermarket?\u003c\/strong\u003e 18-2887-9 is a Sierra aftermarket replacement gasket manufactured to meet or exceed the performance of the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace the fuel tank gasket on my Johnson or Evinrude tank?\u003c\/strong\u003e Replace the 18-2887-9 gasket any time the fuel tank fitting is removed for service or if you notice a fuel leak or loose seal at the fitting, since the gasket is a wear item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order 18-2887-9?\u003c\/strong\u003e An order of Sierra 18-2887-9 includes one package containing 2 fuel tank gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan 18-2887-9 be used on other outboard brands besides Johnson and Evinrude?\u003c\/strong\u003e The 18-2887-9 gasket is designated for Johnson and Evinrude fuel tank applications; fitment on other brands is not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-2887-9 gasket come with an installation guide?\u003c\/strong\u003e The 18-2887-9 package includes the gaskets only; no separate installation guide is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-2887-9 fuel tank gasket?\u003c\/strong\u003e The UPC for the Sierra 18-2887-9 fuel tank gasket, pack of 2, is 808282163921.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988132933851,"sku":"SIE-18-2887-9","price":10.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_f94400a4-a129-4a25-9e5d-1c57a39d2384.jpg?v=1785353674"},{"product_id":"sierra-18-6501-rewind-spring-for-johnson-evinrude-outboards-replaces-omc-395460-307573","title":"Sierra 18-6501 Fuel Tank Gasket, Replaces OEM 302557, Package of 2","description":"\u003cp\u003eThe Sierra 18-6501 Fuel Tank Gasket is a direct-fit replacement gasket engineered to replace OEM number 302557. It is sold as a package of 2, so you get a matched pair of gaskets in a single purchase rather than having to order two separate units. The gasket is designed to seat between the fuel tank and its mating surface to maintain a tight seal, helping prevent fuel leaks and vapor loss at the tank connection. Because it is manufactured to the OEM 302557 reference, it is intended to install as a drop-in match without modification for applications that originally used that part number.\u003c\/p\u003e\u003cp\u003eEach package weighs 0.3 pounds, making it a lightweight, low-cost maintenance item that is easy to keep on hand as a spare when servicing a fuel tank. As a Sierra branded part, it carries the manufacturer part number 18-6501 for easy reordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6501\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2 gaskets per package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces (OEM):\u003c\/strong\u003e 302557\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999236487\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits applications that originally used OEM fuel tank gasket 302557.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e302557\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does the Sierra 18-6501 fuel tank gasket replace?\u003c\/strong\u003e It replaces OEM number 302557, and the Sierra 18-6501 is manufactured to match that original part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets are included with part number 18-6501?\u003c\/strong\u003e The 18-6501 is sold as a package of 2 gaskets, not as a single unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy a single Sierra 18-6501 gasket instead of a pair?\u003c\/strong\u003e No, the 18-6501 is only sold as a package of 2 gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-6501 fuel tank gasket weigh?\u003c\/strong\u003e The package weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6501 an OEM or aftermarket part?\u003c\/strong\u003e It is an aftermarket replacement gasket manufactured by Sierra to replace OEM number 302557.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-6501 fuel tank gasket?\u003c\/strong\u003e The UPC is 030999236487.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the 18-6501 gasket fits my boat's fuel tank?\u003c\/strong\u003e Check whether your original gasket or its documentation references OEM number 302557, since the Sierra 18-6501 is built to replace that specific part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-6501 come with installation hardware?\u003c\/strong\u003e The package includes 2 gaskets only; no additional hardware is specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6501 gasket reusable after removal?\u003c\/strong\u003e Gaskets are generally intended for single use once compressed and removed, which is why the 18-6501 is sold as a package of 2 for replacement needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand manufactures part number 18-6501?\u003c\/strong\u003e Sierra manufactures the 18-6501 fuel tank gasket.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988357689563,"sku":"SIE-18-6501","price":15.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-6501_lg__46748.1558129078.500.750.jpg?v=1785188134"},{"product_id":"fuel-sender-gasket-64082-for-marine-fuel-tank-sending-units-teleflex-sierra","title":"Sierra Fuel Sender Gasket, Part Number 64082, Cross-Reference Teleflex TEL64082","description":"\u003cp\u003eThe Sierra 64082 is a fuel sender gasket used to seal the mounting flange of a boat's fuel sending unit against the fuel tank, preventing fuel vapor and liquid leaks at the sender-to-tank interface. This gasket is the replacement seal to install any time a fuel sender is removed for service, testing, or replacement, since the original gasket should not be reused once broken loose from its seat. Sierra 64082 is a direct cross-reference to the Teleflex TEL64082 gasket, so it is the correct replacement part whether the sender assembly it seals is branded Sierra or Teleflex. It is a lightweight component at 0.03 pounds, sized specifically to match the bolt pattern and flange profile of compatible fuel sender assemblies. Keeping a spare of this gasket on hand is useful for routine fuel system maintenance, since a fuel sender is one of the more commonly serviced components on a boat's fuel tank. The part carries UPC 731957408884, which can be used to confirm you are ordering the correct gasket for your fuel sender. Installing the correct gasket, rather than reusing a worn one or substituting an incorrect size, is the primary way to prevent fuel leaks and vapor intrusion at the sender mounting point.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 64082\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957408884\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Sender Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross Reference:\u003c\/strong\u003e Teleflex TEL64082\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits fuel sender assemblies that use the Sierra 64082 or Teleflex TEL64082 gasket.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTEL64082\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 64082 gasket used for?\u003c\/strong\u003e It seals the mounting flange where a fuel sending unit meets the fuel tank, preventing fuel and vapor leaks. The Sierra 64082 gasket should be replaced any time the fuel sender is removed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 64082 gasket cross-reference to any other brand?\u003c\/strong\u003e Yes, the Sierra 64082 gasket is a direct cross-reference to the Teleflex TEL64082 gasket, so either part number identifies the same gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 64082 gasket weigh?\u003c\/strong\u003e It weighs 0.03 pounds, consistent with its thin, single-layer gasket construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the old gasket when reinstalling a fuel sender?\u003c\/strong\u003e A fuel sender gasket like the Sierra 64082 is designed as a one-time seal; once removed, a fresh gasket such as this one should be installed to maintain a leak-free seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC number identifies the Sierra 64082 gasket?\u003c\/strong\u003e UPC 731957408884 identifies the Sierra 64082 fuel sender gasket, which can be used to confirm you are ordering the correct part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Sierra 64082 gasket fit a Teleflex-branded fuel sender?\u003c\/strong\u003e Yes, because Sierra 64082 cross-references to Teleflex TEL64082, it is the correct gasket for fuel senders that use that Teleflex part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 64082 gasket sold individually or as part of a kit?\u003c\/strong\u003e The Sierra 64082 is sold as a standalone fuel sender gasket, not bundled with the sender or other hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens if the wrong gasket is used on a fuel sender?\u003c\/strong\u003e An incorrect or reused gasket at the fuel sender mounting flange can allow fuel or vapor to leak past the seal, which is why matching the exact part number, such as Sierra 64082, matters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 64082 a genuine OEM part or an aftermarket equivalent?\u003c\/strong\u003e Sierra 64082 is manufactured under the Sierra brand and is offered as the equivalent replacement for the Teleflex TEL64082 gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 64082 gasket made from?\u003c\/strong\u003e The specific gasket material is not specified for the Sierra 64082; it is designed as a sealing gasket for the fuel sender mounting flange.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988450554075,"sku":"SIE-64082","price":5.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-64082__68349.1558189176.500.750.jpg?v=1785188895"},{"product_id":"sea-dog-335690-1-universal-deck-fill-key-304-stainless-steel-multi-tool-fits-all-sea-dog-fuel-fills-and-most-competitor-deck-fills","title":"Sea-Dog Universal Deck Fill Key, Stamped 304 Stainless Steel Multi-Tool, 335690-1","description":"\u003cp\u003eThe Sea-Dog Universal Deck Fill Key (335690-1) is a multi-function tool built to fit all Sea-Dog fuel fills as well as most other deck fill brands on the market. Boaters use it to open and close deck plate fills for fuel, water, and waste tanks without needing a separate wrench for each fitting. Beyond turning deck fills, the key doubles as a shackle key, a bottle opener, and a straight blade screwdriver, and it includes both a 5\/16 inch and a 7\/16 inch hex head wrench, making it a handy all-in-one tool to keep aboard.\u003c\/p\u003e\u003cp\u003eIt is stamped from 304 stainless steel, giving it resistance to the corrosive effects of saltwater and marine air so it holds up to repeated use in a wet environment. The key measures 4 inches along its longest dimension and is compact enough to store in a tool kit, glove box, or dock bag.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 335690-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 2-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex Wrench Sizes:\u003c\/strong\u003e 5\/16 inch and 7\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional Functions:\u003c\/strong\u003e Shackle key, bottle opener, straight blade screwdriver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits all Sea-Dog fuel fills and most other competitor fills\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 335690-1 deck fill key used for?\u003c\/strong\u003e The Sea-Dog 335690-1 is a deck fill key used to open and close deck plate fuel, water, or waste fills, and it fits all Sea-Dog fuel fills as well as most other competitor fills.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this key fit deck fills from other brands, not just Sea-Dog?\u003c\/strong\u003e Yes, the 335690-1 Universal Deck Fill Key is designed to fit all Sea-Dog fuel fills as well as most other deck fill brands on the market.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 335690-1 deck fill key made of?\u003c\/strong\u003e It is stamped from 304 stainless steel, which resists corrosion in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the deck fill key do anything besides open fuel fills?\u003c\/strong\u003e Yes, the 335690-1 also functions as a shackle key, a bottle opener, and a straight blade screwdriver, and it includes a 5\/16 inch and a 7\/16 inch hex head wrench.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is the Sea-Dog 335690-1 deck fill key?\u003c\/strong\u003e The key measures 4 inches at dimension A, with additional dimensions of 2-3\/4 inches, 1-1\/16 inches, and 1-3\/16 inches at points B, C, and D.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 335690-1 deck fill key weigh?\u003c\/strong\u003e The Sea-Dog Universal Deck Fill Key weighs 0.13 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hex wrench sizes are built into this tool?\u003c\/strong\u003e The 335690-1 includes both a 5\/16 inch and a 7\/16 inch hex head wrench built into the key.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog deck fill key resistant to rust?\u003c\/strong\u003e Yes, it is constructed of stamped 304 stainless steel, which is corrosion resistant and suited to saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this key on my boat's water or waste deck fills, not just fuel?\u003c\/strong\u003e The 335690-1 Universal Deck Fill Key fits all Sea-Dog fuel fills as well as most other competitor deck fills, making it suitable wherever a compatible deck fill fitting is used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog part?\u003c\/strong\u003e Yes, the 335690-1 is a genuine Sea-Dog Universal Deck Fill Key, made from stamped 304 stainless steel.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988755558619,"sku":"S-D-335690-1","price":9.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4766.jpg?v=1784428880"},{"product_id":"sea-dog-flip-top-gas-deck-fill-1-1-2-hose-investment-cast-316-stainless-steel-hinged-cap-351110","title":"Sea-Dog Flip Top Gas Fill 351110, 1-1\/2 Inch Hose, 316 Stainless Steel, Silver","description":"\u003cp\u003eThe Sea-Dog Flip Top Gas Fill (part number 351110) is a deck-mounted fuel fill fitting built for boats using a 1-1\/2 inch fill hose. A convenient thumb latch opens the fill for fueling, and the hinged lid design guarantees the cap will not fall overboard and get lost at sea. The fitting is constructed of investment cast 316 stainless steel, a corrosion-resistant material well suited to saltwater and marine deck environments where standard steel or plated hardware would eventually rust or pit.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the fill mounts to the deck using four #10 flat head fasteners (not included), and per USCG regulations a bonding wire must be connected to prevent sparking during fueling. The unit is finished in silver and measures 6 inches long by 5 inches wide overall, with a nominal wall thickness of 0.125 inches, weighing 2.04 pounds. If the internal lever and cap ever wear out, Sea-Dog offers a separate Stainless Lever \u0026amp; Cap Rebuild Kit (351119) containing a lever, lever spring, two pivot pins, a cotter pin, a cap spring, and a gasket\/washer, so the whole fitting does not need to be replaced.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 6 inches L x 5 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Length:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Wall Thickness:\u003c\/strong\u003e 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Requirement:\u003c\/strong\u003e Four #10 flat head fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514351102\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal deck fill fitting sized for a 1-1\/2 inch fill hose; no make, model, or year restrictions are specified.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Sea-Dog 351110 Flip Top Gas Fill accept?\u003c\/strong\u003e It is sized for a 1-1\/2 inch fill hose, as marked on the Sea-Dog 351110 Flip Top Gas Fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog Flip Top Gas Fill made of stainless steel?\u003c\/strong\u003e Yes, the Sea-Dog 351110 Flip Top Gas Fill is constructed of investment cast 316 stainless steel, chosen for its corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog 351110 deck fill installed?\u003c\/strong\u003e It mounts to the deck with four #10 flat head fasteners, which are not included with the fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Flip Top Gas Fill require a bonding wire?\u003c\/strong\u003e Yes, USCG regulations require a bonding wire on the Sea-Dog 351110 Flip Top Gas Fill to prevent sparking during fueling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog 351110 gas fill?\u003c\/strong\u003e The Sea-Dog Flip Top Gas Fill is finished in silver.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the Sea-Dog Flip Top Gas Fill?\u003c\/strong\u003e It measures 6 inches long by 5 inches wide, with a nominal wall thickness of 0.125 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 351110 gas fill weigh?\u003c\/strong\u003e The Sea-Dog 351110 Flip Top Gas Fill weighs 2.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Sea-Dog 351100 and 351110 gas fills?\u003c\/strong\u003e The 351100 is sized for a 2 inch fill hose while the 351110 is sized for a 1-1\/2 inch fill hose; both are the same investment cast 316 stainless steel Flip Top Gas Fill design but fit different hose diameters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the lever and cap on the Sea-Dog Flip Top Gas Fill be rebuilt?\u003c\/strong\u003e Yes, Sea-Dog offers a Stainless Lever \u0026amp; Cap Rebuild Kit (part number 351119) for the Flip Top Gas Fill, containing a lever, lever spring, two pivot pins, a cotter pin, a cap spring, and a gasket\/washer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the thumb latch on the Sea-Dog 351110 work?\u003c\/strong\u003e A thumb latch opens the hinged lid on the Flip Top Gas Fill, and the hinged design guarantees the cap will not fall overboard while fueling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 351110 Flip Top Gas Fill?\u003c\/strong\u003e The UPC for this Sea-Dog Flip Top Gas Fill is 035514351102.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 351110 gas fill a genuine Sea-Dog part?\u003c\/strong\u003e Yes, the 351110 Flip Top Gas Fill is a genuine Sea-Dog Line product, not an aftermarket equivalent.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988759064795,"sku":"S-D-351110","price":78.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4798.jpg?v=1784428919"},{"product_id":"sea-dog-351320k-gas-deck-fill-with-key-1-1-2-hose-316-stainless-steel","title":"Sea-Dog Stainless Steel Gas Deck Fill with Key, 1-1\/2 Inch Hose, 351320K","description":"\u003cp\u003eThe Sea-Dog 351320K is a stainless steel gas deck fill designed to give boaters a durable, corrosion-resistant fuel filling point on deck. Marked \"Gas\" on the body for clear fuel identification, it connects to a 1-1\/2 inch hose and is built from investment cast 316 stainless steel, a grade chosen for its resistance to saltwater corrosion and long service life in marine environments. The slotted cap has a 1-7\/8 inch diameter and uses an 11-1\/2 NPSM straight thread pitch, and it opens and closes with the included stainless steel Deck Fill Key (351399), so no separate tool purchase is needed. An attachment chain keeps the cap tethered to the fitting, reducing the chance of it being dropped or lost overboard during fueling.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the deck fill mounts with three #10 FH fasteners (not included) and is compatible with the standard 1-1\/2 inch hose size used across many boats. Because this fitting is used for fuel, USCG regulations require a bonding wire be connected to prevent sparking, and a flange gasket (351349) is sold separately to complete a watertight seal at installation. Note that this is the GAS version of this deck fill; a WATER version using the same body style is sold separately under part number 351322K, so be sure to select the correct part number for your intended use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351320K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluid Marking:\u003c\/strong\u003e Gas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 1-7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 3 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 3 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #10 FH (three required, not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Stainless Deck Fill Key (351399), attachment chain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.96 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514352390\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for boats using a standard 1-1\/2 inch fuel fill hose.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 351320K used for?\u003c\/strong\u003e The 351320K is a stainless steel deck fill used to fill a boat's fuel tank from the deck, marked \"Gas\" to identify it as a fuel fitting rather than a water fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does this deck fill connect to?\u003c\/strong\u003e This deck fill is sized for a 1-1\/2 inch hose connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 351320K come with a key to open the cap?\u003c\/strong\u003e Yes, a stainless steel Deck Fill Key (351399) is included and is required to open and close the slotted cap on the 351320K.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 351320K made from?\u003c\/strong\u003e It is constructed of investment cast 316 stainless steel, chosen for its resistance to corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the cap diameter and thread specs?\u003c\/strong\u003e The cap diameter is 1-7\/8 inch, with an 11-1\/2 NPSM straight thread pitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 351320K installed?\u003c\/strong\u003e It installs with three #10 FH fasteners, which are not included, and mounts flush to the deck at the marked location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 351320K weigh?\u003c\/strong\u003e The Sea-Dog 351320K deck fill weighs 0.96 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a gasket included with the 351320K?\u003c\/strong\u003e No, the flange gasket (351349) is sold separately from the 351320K deck fill and should be ordered to complete a watertight installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a bonding wire requirement for this deck fill?\u003c\/strong\u003e Yes, USCG regulations require a bonding wire be connected at the 351320K to prevent sparking, since it is a fuel fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 351320K and the 351322K?\u003c\/strong\u003e The 351320K is marked for Gas while the 351322K is the equivalent deck fill marked for Water; they share the same body style but are separate part numbers, so order the one matching your intended fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a locking version of this deck fill available?\u003c\/strong\u003e Yes, Sea-Dog offers a Locking Hose Deck Fill (351320L) for the same 1-1\/2 inch gas hose application, which is a different part number from the standard 351320K.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cap stay attached when opened?\u003c\/strong\u003e Yes, the 351320K includes an attachment chain that keeps the cap tethered to the fitting so it is not lost when opened for fueling.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988759130331,"sku":"S-D-351320K","price":48.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7145.jpg?v=1784428924"},{"product_id":"sea-dog-351320l-1-locking-gas-deck-fill-316-stainless-steel-1-1-2-in-hose","title":"Sea-Dog Locking Gas Deck Fill 351320L-1, 1-1\/2 Inch Hose, 316 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog 351320L-1 Locking Hose Deck Fill secures a boat's gas fill point against fuel theft while providing the standard 1-1\/2 inch hose connection used on most recreational fuel systems. The cap locks in place and spins freely once locked, so it cannot be forced or pried off; to open it, the owner turns the supplied key until the key hole lines up with the cap tabs. Two keys are included along with a cap attachment cable so the cap can't be misplaced dockside.\u003c\/p\u003e\u003cp\u003eThe deck fill body and cap are investment cast from 316 stainless steel, giving it strong resistance to salt-air corrosion and long-term durability in a marine environment. The cap measures 2-1\/8 inches in diameter with an 11-1\/2 NPSM straight thread pitch. The fitting is color-coded and marked with the international symbol for gasoline, making it easy to visually confirm the correct deck fill during fueling. Installation is with three #10 flat head fasteners (not included), and per USCG regulations a bonding wire must be connected to the fitting to prevent sparking during fueling.\u003c\/p\u003e\u003cp\u003eThis is the gas-specific version of Sea-Dog's Locking Hose Deck Fill line, built for 1-1\/2 inch hose. Matching diesel and water versions, and a 2 inch hose version, are sold separately under their own part numbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351320L-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 3-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 3-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #10 flat head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock Type:\u003c\/strong\u003e Key lock, includes two keys\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Two keys, cap attachment cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.342 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for boats with a 1-1\/2 inch gas fill hose and a standard deck fill mounting hole; not vehicle or engine specific.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does this deck fill fit?\u003c\/strong\u003e The Sea-Dog 351320L-1 connects to 1-1\/2 inch hose, the standard size used on most gas fuel fill lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this deck fill lock?\u003c\/strong\u003e Yes. The 351320L-1 has a locking cap that spins freely once locked, preventing it from being forced or pried open; two keys are included to unlock it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the deck fill made of?\u003c\/strong\u003e It is investment cast from 316 stainless steel, chosen for its resistance to salt-air corrosion in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the cap dimensions and thread size?\u003c\/strong\u003e The cap on the 351320L-1 is 2-1\/8 inches in diameter with an 11-1\/2 NPSM straight thread pitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included?\u003c\/strong\u003e No. The 351320L-1 installs with three #10 flat head fasteners that are purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you know it's the gas version and not diesel or water?\u003c\/strong\u003e This part, 351320L-1, is color-coded and marked with the international symbol for gasoline; Sea-Dog sells matching diesel and water versions under different part numbers, so check the marking before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bonding wire required?\u003c\/strong\u003e Yes. USCG regulations require a bonding wire to be connected to the deck fill to prevent sparking during fueling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the 351320L-1?\u003c\/strong\u003e The package includes the locking deck fill body and cap, two keys, and a cap attachment cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this deck fill weigh?\u003c\/strong\u003e The Sea-Dog 351320L-1 weighs 1.342 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the cap or attachment cable be replaced separately?\u003c\/strong\u003e Yes. Sea-Dog offers a replacement non-locking cap (351391-1) and a replacement attachment cable (0P35105) for this deck fill line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog part?\u003c\/strong\u003e Yes, the 351320L-1 is a genuine Sea-Dog investment cast 316 stainless steel locking deck fill, not an aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fit a 2 inch hose instead of 1-1\/2 inch?\u003c\/strong\u003e No. The 351320L-1 is built for 1-1\/2 inch hose; Sea-Dog's 351330L is the 2 inch hose gas version.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988759163099,"sku":"S-D-351320L-1","price":85.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4807.jpg?v=1784428930"},{"product_id":"sea-dog-351320-1-gas-deck-fill-1-1-2-in-hose-investment-cast-316-stainless-steel-with-locking-key-and-chain","title":"Sea-Dog 351320-1 Cast 316 Stainless Steel 1-1\/2 Inch Gas Deck Fill with Key","description":"\u003cp\u003eThe Sea-Dog 351320-1 is a 1-1\/2 inch hose gas deck fill built from investment cast 316 stainless steel for corrosion resistance in a marine environment. It is designed for filling a boat's gas tank through the deck, with a slotted cap that requires the included key to open and close, adding a layer of security against unauthorized access or tampering at the fill point. The cap diameter measures 1-7\/8 inches, and the fill uses an 11-1\/2 NPSM straight thread pitch. A chain attaches the cap to the fill base so the cap cannot be misplaced once removed for fueling.\u003c\/p\u003e\u003cp\u003eThis deck fill installs with three #10 flat head fasteners (not included), so the installer will need to source the appropriate hardware separately. Because it is a fitting for a boat's fuel system, USCG regulations require a bonding wire to be connected to prevent sparking; the deck fill itself does not include the bonding wire. The overall item measures 3.5 x 5.25 x 7.88 inches. This is the gas-specific version of Sea-Dog's keyed hose deck fill line; a separate 2 inch version with a 2-1\/8 inch cap diameter is also made, so boat owners should confirm the 1-1\/2 inch hose size matches their existing fuel fill hose before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351320-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Gas Deck Fill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1-1\/2 Inch (Gas)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3.5 x 5.25 x 7.88 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.966 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners:\u003c\/strong\u003e Three #10 flat head screws (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Attachment chain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514351669\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Sea-Dog 351320-1 deck fill fit?\u003c\/strong\u003e The Sea-Dog 351320-1 is built for a 1-1\/2 inch I.D. Gas fill hose, with a cap diameter of 1-7\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this deck fill come with a key?\u003c\/strong\u003e Yes, the 351320-1 includes a key; the cap is slotted and requires the key to open and close for added security at the fuel fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 351320-1 deck fill made from?\u003c\/strong\u003e It is made from investment cast 316 stainless steel, chosen for corrosion resistance in marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread pitch does this deck fill use?\u003c\/strong\u003e The Sea-Dog 351320-1 uses an 11-1\/2 NPSM straight thread pitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the deck fill installed?\u003c\/strong\u003e It installs with three #10 flat head fasteners, which are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bonding wire included with this deck fill?\u003c\/strong\u003e No. USCG regulations require a bonding wire on the fill to prevent sparking, but the 351320-1 does not include the bonding wire itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 351320-1 deck fill weigh?\u003c\/strong\u003e The Sea-Dog 351320-1 weighs 0.966 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this deck fill?\u003c\/strong\u003e The 351320-1 measures 3.5 x 5.25 x 7.88 inches overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the cap attached to the deck fill base?\u003c\/strong\u003e Yes, the cap on the 351320-1 is secured to the deck fill base by an attachment chain so it cannot be dropped or lost during fueling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this deck fill for gas or diesel?\u003c\/strong\u003e The Sea-Dog 351320-1 is the gas-specific version of this deck fill line, sized for a 1-1\/2 inch gas fill hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 351320-1 deck fill?\u003c\/strong\u003e It has a natural stainless steel finish, listed as steel in color.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988759195867,"sku":"S-D-351320-1","price":48.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4768.jpg?v=1784428932"},{"product_id":"sea-dog-351322-1-stainless-steel-water-deck-fill-for-1-1-2-hose-keyed-locking-cap-316-cast-ss","title":"Sea-Dog Locking Water Deck Fill, 1-1\/2 Inch Hose, 316 Stainless Steel","description":"\u003cp\u003eThis Sea-Dog deck fill is marked for Water and is built to accept a 1-1\/2 inch hose, making it the fitting to install where a boat's fresh water fill line meets the deck. It uses a locking cap to help prevent tampering: the cap spins freely while in the locked position, and to unlock it the key is turned until the keyhole lines up with the cap tabs. Two keys are included along with a cap attachment cable so the cap cannot be misplaced once removed.\u003c\/p\u003e\u003cp\u003eThe cap has a 2-1\/8 inch diameter with an 11-1\/2 NPSM straight thread pitch, and the deck fill is color-coded with an international symbol so crew and fuel dock staff can identify the Water fill at a glance. The body is constructed of investment cast 316 stainless steel for corrosion resistance and long-term durability in a marine environment. It installs with three #10 flat head fasteners (not included). As with other through-deck fittings that connect to below-deck lines, USCG regulations require a bonding wire be attached to prevent sparking.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351322-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Fill Marking:\u003c\/strong\u003e Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 2-1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment cast 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Key-operated locking cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Two keys and cap attachment cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Fasteners:\u003c\/strong\u003e Three #10 flat head screws (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding Requirement:\u003c\/strong\u003e USCG-required bonding wire to prevent sparking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.968 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does this deck fill accept?\u003c\/strong\u003e The Sea-Dog 351322-1 deck fill is built for a 1-1\/2 inch hose connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this deck fill marked for?\u003c\/strong\u003e It carries a Water marking with an international symbol, identifying it for a boat's fresh water fill line rather than fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cap lock?\u003c\/strong\u003e Yes, the cap on the Sea-Dog 351322-1 locks with a key; it spins freely while in the locked position, and lines up with the cap tabs to unlock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many keys come with it?\u003c\/strong\u003e Two keys are included with this Sea-Dog Water deck fill, along with a cap attachment cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the deck fill made from?\u003c\/strong\u003e It is constructed of investment cast 316 stainless steel for corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the cap dimensions and thread type?\u003c\/strong\u003e The cap measures 2-1\/8 inch in diameter and uses an 11-1\/2 NPSM straight thread pitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install it?\u003c\/strong\u003e Installation requires three #10 flat head fasteners, which are not included with the Sea-Dog 351322-1 deck fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bonding wire required for installation?\u003c\/strong\u003e Yes, USCG regulations require a bonding wire be connected to this deck fill to prevent sparking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the deck fill weigh?\u003c\/strong\u003e The Sea-Dog Water deck fill weighs 0.968 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the cap be removed without the key?\u003c\/strong\u003e No, the cap on this deck fill spins freely when locked and only releases once the key aligns the keyhole with the cap tabs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the same fitting as the Gas or Diesel versions?\u003c\/strong\u003e No, this SKU is marked Water; the Gas and Diesel deck fills in the same series are separate parts (351320L-1 and 351321L-1) with different color-coded markings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this deck fill?\u003c\/strong\u003e The Sea-Dog 351322-1 includes the Water deck fill body with locking cap, two keys, and a cap attachment cable.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988759425243,"sku":"S-D-351322-1","price":48.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7144_15685e31-ed0a-4f75-a039-e3ab9dc901be.jpg?v=1784428949"},{"product_id":"sea-dog-351391-1-replacement-cap-for-2-hose-deck-fill-316-stainless-steel-with-chain-and-locking-key-slot","title":"Sea-Dog Replacement Non-Locking Cap for 2 Inch Hose Deck Fills, 351391-1","description":"\u003cp\u003eThe Sea-Dog 351391-1 is a replacement non-locking cap for Sea-Dog 2 inch hose deck fills. It is designed to replace the locking cap on the 2 inch hose Gas and Diesel deck fill assemblies, giving boat owners a quick-access, key-free option for their deck fill. The cap measures 2-1\/8 inches in diameter and uses an 11-1\/2 NPSM straight thread pitch to mate with the deck fill body.\u003c\/p\u003e\u003cp\u003eIt is machined from investment cast 316 stainless steel for corrosion resistance and long-term durability in a marine environment. The cap is sold as a standalone replacement part, separate from the deck fill body, hose barb, and fasteners.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351391-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Replacement Non-Locking Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Deck Fill Hose Size:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment cast 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.322 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 2.69 x 4.44 x 1.69 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514351027\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Sea-Dog 351330L (Gas) 2 inch hose locking deck fill\u003c\/li\u003e\n\u003cli\u003eCompatible with Sea-Dog 351331L (Diesel) 2 inch hose locking deck fill\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 351391-1?\u003c\/strong\u003e The Sea-Dog 351391-1 is a replacement non-locking cap for 2 inch hose deck fills, sold as a standalone spare cap rather than a complete deck fill assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 351391-1 lock with a key?\u003c\/strong\u003e No, the 351391-1 is the non-locking version of the cap, unlike the standard locking cap that comes on the Sea-Dog 351330L and 351331L deck fills.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cap diameter of the 351391-1?\u003c\/strong\u003e The cap diameter is 2-1\/8 inches, with an 11-1\/2 NPSM straight thread pitch for mating to the deck fill body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat deck fills is this cap compatible with?\u003c\/strong\u003e The 351391-1 fits Sea-Dog 351330L (2 inch hose, Gas) and 351331L (2 inch hose, Diesel) locking hose deck fills.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 351391-1 cap made of?\u003c\/strong\u003e It is machined from investment cast 316 stainless steel, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 351391-1 weigh?\u003c\/strong\u003e This replacement cap weighs 0.322 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 351391-1 cap?\u003c\/strong\u003e The product dimensions are 2.69 x 4.44 x 1.69 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 351391-1 a full deck fill or just the cap?\u003c\/strong\u003e It is just the cap, part number 351391-1, intended to replace the cap on an existing 2 inch hose deck fill assembly rather than the entire unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 351391-1 on both gas and diesel deck fills?\u003c\/strong\u003e Yes, the 351391-1 is compatible with both the 351330L Gas and 351331L Diesel 2 inch hose deck fills since it shares the same 2-1\/8 inch, 11-1\/2 NPSM straight thread cap fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the thread pitch on the 351391-1 cap?\u003c\/strong\u003e The thread pitch is 11-1\/2 NPSM straight.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988759523547,"sku":"S-D-351391-1","price":25.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4807_b188c5c7-66e1-4e9c-a04a-ab269f4607b9.jpg?v=1784428957"},{"product_id":"sea-dog-351399-1-deck-fill-key-investment-cast-316-stainless-steel-fits-1-3-16-on-center-fill-caps","title":"Sea-Dog Deck Fill Key 351399-1, 316 Stainless Steel, Fits 351320-351331 and 351350-351353 Deck Fill Caps","description":"\u003cp\u003eThe Sea-Dog Deck Fill Key (351399-1) is a 1-3\/16 inch stainless steel key designed to open and close Sea-Dog cast stainless steel deck fill caps. It is machined from investment cast 316 stainless steel, giving it strong resistance to the saltwater, fuel, and weather exposure that deck hardware faces on a daily basis. The key engages the slotted openings on compatible deck fill caps, which are used to access fuel, water, and waste fill points on a boat.\u003c\/p\u003e\u003cp\u003eThis key is sized to fit Sea-Dog cast stainless steel deck fill caps with holes on 1-3\/16 inch centers, specifically the 351320-351331 and 351350-351353 series. Keeping a dedicated key on board (or a spare in the tool locker) makes it easy to open a fill cap when the built-in key feature on some caps is worn, missing, or hard to grip with wet hands. Because it is a separate accessory rather than part of the cap assembly, it can be replaced on its own without buying a new fill cap.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351399-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Deck Fill Key\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 1-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.054 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514351034\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits Sea-Dog cast stainless steel deck fill caps 351320-351331 and 351350-351353\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits Sea-Dog cast stainless steel deck fill caps with 1-3\/16 inch hole centers, series 351320-351331 and 351350-351353\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 351399-1 deck fill key used for?\u003c\/strong\u003e It opens and closes Sea-Dog cast stainless steel deck fill caps by engaging the slotted opening on the cap, giving you a dedicated tool for accessing fuel, water, or waste fill points on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich deck fill caps does the 351399-1 key fit?\u003c\/strong\u003e This key fits Sea-Dog cast stainless steel deck fill caps with 1-3\/16 inch hole centers, covering the 351320-351331 and 351350-351353 series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the deck fill key made from?\u003c\/strong\u003e The 351399-1 key is machined from investment cast 316 stainless steel, chosen for its resistance to corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the deck fill key?\u003c\/strong\u003e The Sea-Dog 351399-1 measures 1-3\/16 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the deck fill key weigh?\u003c\/strong\u003e It weighs 0.054 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this key come with a fill cap?\u003c\/strong\u003e No, the 351399-1 is sold as a standalone key. It is intended to open and close compatible Sea-Dog deck fill caps that are purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this key be used as a spare or backup?\u003c\/strong\u003e Yes, many boat owners keep a spare 351399-1 key on board or in a tool locker in case the primary key is lost or a cap's built-in grip feature is worn.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 351399-1 key resistant to saltwater corrosion?\u003c\/strong\u003e Yes, because it is made of investment cast 316 stainless steel, a grade widely used in marine hardware for its resistance to saltwater corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this key fit fill caps from other brands?\u003c\/strong\u003e The 351399-1 is confirmed to fit Sea-Dog cast stainless steel deck fill caps in the 351320-351331 and 351350-351353 series; fitment with other brands is not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a non-metal alternative to this stainless key?\u003c\/strong\u003e Sea-Dog also offers a nylon deck fill key (357399-1) as an alternative to the stainless steel 351399-1 for buyers who prefer a non-metal option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the product's UPC code?\u003c\/strong\u003e The Sea-Dog 351399-1 deck fill key has UPC 035514351034.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many keys come in a package?\u003c\/strong\u003e The 351399-1 is packaged as a single key (package quantity of 1).\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988761030875,"sku":"S-D-351399-1","price":4.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4812.jpg?v=1784428960"},{"product_id":"sea-dog-351390-1-replacement-deck-fill-cap-with-chain-for-1-1-2-hose-deck-fills-investment-cast-316-stainless-steel","title":"Sea-Dog 351390-1 Replacement Cap for 1-1\/2 Inch Angled Hose Deck Fills 351520-351523","description":"\u003cp\u003eThe Sea-Dog 351390-1 is a genuine replacement cap for Sea-Dog's 1-1\/2 inch angled hose deck fills, part numbers 351520-351523. If the original cap on a gas or diesel deck fill is lost, damaged, or worn out, this cap restores the fitting to like-new function without replacing the entire deck fill assembly.\u003c\/p\u003e\u003cp\u003eThe cap uses a slotted design that requires a deck fill key to open and close, adding a layer of security against tampering or unauthorized access to the fuel or water fill. It is constructed of investment cast 316 stainless steel for corrosion resistance in a marine environment, matching the material used across the deck fill line it belongs to. The cap measures 1-7\/8 inches in diameter with an 11-1\/2 NPSM straight thread pitch, matching the threads on the 351520-351523 deck fill bodies.\u003c\/p\u003e\u003cp\u003eAn attachment cable (0P35105) is included with the cap so it stays tethered to the deck fill and cannot be dropped or lost overboard during use. A flange gasket for 1-1\/2 inch deck fills (351349) is sold separately and is not included with this cap. The 351390-1 weighs 0.22 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351390-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Deck Fill Models:\u003c\/strong\u003e 351520-351523\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment cast 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment Cable:\u003c\/strong\u003e Included (0P35105)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket:\u003c\/strong\u003e Sold separately (351349)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.22 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514351010\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSea-Dog 1-1\/2 inch angled hose deck fills, part numbers 351520-351523\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo cross-reference numbers listed\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat deck fills does the Sea-Dog 351390-1 cap fit?\u003c\/strong\u003e The 351390-1 is a replacement cap for Sea-Dog's 1-1\/2 inch angled hose deck fills, part numbers 351520-351523.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a key to open this deck fill cap?\u003c\/strong\u003e Yes, the 351390-1 uses a slotted cap design that requires a deck fill key to open and close, which adds security against unauthorized access.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 351390-1 cap made of?\u003c\/strong\u003e It is constructed of investment cast 316 stainless steel, matching the material used across Sea-Dog's angled hose deck fill line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size and thread does the cap use?\u003c\/strong\u003e The 351390-1 cap has a diameter of 1-7\/8 inches with an 11-1\/2 NPSM straight thread pitch, matching the 351520-351523 deck fill bodies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the replacement cap come with an attachment cable?\u003c\/strong\u003e Yes, the 351390-1 includes attachment cable 0P35105 so the cap stays tethered to the deck fill and cannot be dropped or lost.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the gasket included with the 351390-1 cap?\u003c\/strong\u003e No, the flange gasket for 1-1\/2 inch deck fills (part number 351349) is sold separately and is not included with the 351390-1 cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 351390-1 replacement cap weigh?\u003c\/strong\u003e The Sea-Dog 351390-1 cap weighs 0.22 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 351390-1 and 351391-1 caps?\u003c\/strong\u003e The 351390-1 is a replacement cap for the 1-1\/2 inch deck fills (351520-351523), while the 351391-1 is a replacement cap for the 2 inch deck fills (351620-351621).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 351390-1 cap fit both gas and diesel deck fills?\u003c\/strong\u003e The 351390-1 fits the 1-1\/2 inch deck fill bodies (351520-351523) regardless of the fuel type marking on the fill, since it is sized to the 1-7\/8 inch cap diameter and 11-1\/2 NPSM thread shared by that series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cap need a bonding wire?\u003c\/strong\u003e USCG regulations require a bonding wire on deck fill installations to prevent sparking; this applies to the deck fill assembly the 351390-1 cap is installed on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 351390-1 cap sold with the deck fill hardware or fasteners?\u003c\/strong\u003e No, the 351390-1 is the replacement cap only; the deck fill assembly installs with three #10 flat head fasteners, which are not included with the cap.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988761325787,"sku":"S-D-351390-1","price":21.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7144_5eefc388-ed4a-4c1f-9e26-7d43e0dd0736.jpg?v=1784428966"},{"product_id":"sea-dog-351755-1-replacement-deck-fill-cap-for-351750-351750-1-gas-deck-fills-chrome-plated-die-cast-zinc-keyless-tab-cap-fits-1-1-2-hose","title":"Sea-Dog Replacement Cap 351755-1 for 351750 and 351750-1 Gas Deck Fills, Keyless Chrome Plated Die Cast Zinc","description":"\u003cp\u003eThe Sea-Dog 351755-1 is a replacement cap engineered specifically for the Sea-Dog 351750 and 351750-1 gas deck fills. It restores keyless operation to a worn or damaged deck fill without requiring replacement of the entire fitting. The cap uses easy-to-use tabs for keyless operation, so no deck plate key is needed to open or close it dockside or at the fuel pump.\u003c\/p\u003e\u003cp\u003eConstructed of chrome plated die cast zinc, the cap measures 1-11\/16 inches in diameter with a 12 SAE thread pitch to match the threading on the 351750 and 351750-1 deck fill bodies. An attachment chain is included, keeping the cap tethered to the deck fill body so it cannot be dropped or lost overboard during fueling. Installation is a simple thread-on replacement of the original cap, letting the rest of the deck fill assembly remain in place.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351755-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Deck Fill Replacement Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chrome Plated Die Cast Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 12 SAE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Keyless, tab-style (no deck plate key required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Attachment chain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Sea-Dog 351750 and 351750-1 Gas Deck Fills\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.124 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514351089\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSea-Dog 351750 Gas Deck Fill\u003c\/li\u003e\n\u003cli\u003eSea-Dog 351750-1 Gas Deck Fill\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNot applicable - this is the factory replacement cap for the Sea-Dog 351750 and 351750-1 deck fills, not a cross-brand OEM equivalent\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 351755-1 cap compatible with?\u003c\/strong\u003e The Sea-Dog 351755-1 is a replacement cap made specifically to fit the Sea-Dog 351750 and 351750-1 gas deck fills; it is not a universal deck fill cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a deck plate key to operate this cap?\u003c\/strong\u003e No. The 351755-1 cap uses easy-to-use tabs for keyless operation, so it opens and closes without a deck plate key.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 351755-1 cap made of?\u003c\/strong\u003e It is constructed of chrome plated die cast zinc, matching the finish and durability of the original Sea-Dog 351750 deck fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the thread pitch on this cap?\u003c\/strong\u003e The Sea-Dog 351755-1 has a 12 SAE thread pitch, matching the threading on the 351750 and 351750-1 deck fill bodies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the diameter of the cap?\u003c\/strong\u003e The cap diameter is 1-11\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cap come with a way to keep it attached to the boat?\u003c\/strong\u003e Yes, the 351755-1 includes an attachment chain so the cap stays tethered to the deck fill body and cannot be dropped or lost during fueling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the replacement cap weigh?\u003c\/strong\u003e The Sea-Dog 351755-1 replacement cap weighs 0.124 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cap replace a lost or damaged deck fill cap without buying a new deck fill?\u003c\/strong\u003e Yes, the 351755-1 is sold specifically as a replacement cap so you can restore a Sea-Dog 351750 or 351750-1 deck fill without replacing the entire fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 351755-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, it is a genuine Sea-Dog replacement cap, made to match the fit, thread pitch, and finish of the original cap on the 351750 and 351750-1 deck fills.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 351755-1?\u003c\/strong\u003e The package includes the chrome plated die cast zinc cap and its attachment chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cap only for gas deck fills, or does it fit water or waste fills too?\u003c\/strong\u003e The 351755-1 is made to fit the 351750 and 351750-1 gas deck fills specifically.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988762439899,"sku":"S-D-351755-1","price":7.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7590.jpg?v=1784428969"},{"product_id":"sea-dog-351393-1-replacement-deck-fill-cap-316-stainless-steel-keyless-tab-design-fits-351340-1-1-2-in-hose-deck-fill","title":"Sea-Dog Replacement Cap 351393-1 for 351340 Gas Deck Fill, 316 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog 351393-1 is a replacement cap for the Sea-Dog 351340 gas hose deck fill. It is investment cast from corrosion-resistant 316 stainless steel, giving it long-term durability against saltwater exposure on deck. The cap operates without a deck plate key: easy-to-use tabs allow key-less opening and closing, and a cap attachment chain keeps the cap tethered to the deck fill body so it cannot be misplaced when open. The cap measures 1-11\/16 inches in diameter with a 12 SAE thread pitch, matching the threaded neck of the 351340 deck fill. This is a cap-only replacement part; it does not include the deck fill body, mounting fasteners, or the flange gasket, which is sold separately as Sea-Dog part 351349. It ships at 0.236 pounds. Use this part to restore a worn, lost, or damaged cap on an existing 351340 installation without replacing the entire deck fill assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351393-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Replacement Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 12 SAE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Key-less, tab-operated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Attachment:\u003c\/strong\u003e Attachment chain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 4.44 x 2.69 x 1.69 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.236 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514351539\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits the Sea-Dog 351340 gas hose deck fill (1-1\/2 inch hose, 3 inch bulk display size)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sea-Dog 351393-1 replacement cap fit?\u003c\/strong\u003e The 351393-1 is a replacement cap for the Sea-Dog 351340 gas hose deck fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cap made of?\u003c\/strong\u003e It is investment cast from 316 stainless steel for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a deck plate key to open this cap?\u003c\/strong\u003e No. The 351393-1 cap uses easy-to-use tabs for key-less operation, so no deck plate key is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the diameter of this deck fill cap?\u003c\/strong\u003e The Sea-Dog 351393-1 cap has a diameter of 1-11\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread pitch does the cap use?\u003c\/strong\u003e The 351393-1 cap uses a 12 SAE thread pitch to match the 351340 deck fill's threaded neck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 351393-1 cap weigh?\u003c\/strong\u003e It weighs 0.236 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the gasket included with this cap?\u003c\/strong\u003e No. The flange gasket is sold separately as Sea-Dog part 351349 and is not included with the 351393-1 replacement cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cap stay attached to the deck fill when open?\u003c\/strong\u003e Yes, the 351393-1 includes a cap attachment chain that keeps the cap tethered to the deck fill body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of this part?\u003c\/strong\u003e The Sea-Dog 351393-1 measures 4.44 x 2.69 x 1.69 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog part?\u003c\/strong\u003e Yes, 351393-1 is the Sea-Dog manufacturer part number for this replacement cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace the whole deck fill if just the cap is worn?\u003c\/strong\u003e No, the Sea-Dog 351393-1 lets you replace just the cap on an existing 351340 gas deck fill without replacing the full assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The UPC for the Sea-Dog 351393-1 replacement cap is 035514351539.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988763848923,"sku":"S-D-351393-1","price":18.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7591.jpg?v=1784428975"},{"product_id":"sea-dog-357093-1-keyless-replacement-cap-blue-water-nylon-for-1-1-2-hose-deck-fills","title":"Sea-Dog Blue Water Deck Fill Replacement Cap 357093-1, Keyless Design","description":"\u003cp\u003eThe Sea-Dog 357093-1 is a blue replacement cap for water deck fills, designed to thread directly onto Sea-Dog hose deck fill bodies. The cap uses a built-in key for removal instead of a separate loose key, so there is nothing extra to lose overboard. The key can be locked in the upright position for quick opening and closing, or recessed into the cap for a flush surface on deck.\u003c\/p\u003e\u003cp\u003eThe cap is color-coded blue to identify water service, matching Sea-Dog's color system across gas (red), diesel (green), oil (black), and waste (black) caps. This color coding helps prevent the wrong fluid from being added to the wrong fill, which can cause costly contamination problems. The cap includes an attachment chain to keep it tethered to the deck fill body when open.\u003c\/p\u003e\u003cp\u003eConstruction is fiberglass filled injection molded nylon, so the cap contains no metal and does not require grounding to the boat's electrical system. The cap has a 1-7\/8 inch diameter and a straight 11-1\/2 NPSM thread pitch to match Sea-Dog hose deck fills. It connects to the boat's water reservoir through the deck fill body via hose (hose not included).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 357093-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue (Water)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Deck Fill Replacement Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fiberglass filled injection molded nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Type:\u003c\/strong\u003e Built-in, keyless removal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.096 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514357067\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Sea-Dog hose deck fills with 1-7\/8 inch, 11-1\/2 NPSM straight thread caps.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the color blue mean on this Sea-Dog deck fill cap?\u003c\/strong\u003e Blue indicates water service on Sea-Dog deck fill caps, part of a color-coded system that also uses red for gas, green for diesel, and black for oil and waste, so the 357093-1 cap should only be used on a water fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 357093-1 cap need a separate key to open?\u003c\/strong\u003e No, the 357093-1 has a built-in key that can be locked in the upright position for opening and closing or recessed into the cap for a flush deck surface, so there is no loose key to carry or lose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size thread does this replacement cap use?\u003c\/strong\u003e The Sea-Dog 357093-1 cap has a 1-7\/8 inch diameter and a straight 11-1\/2 NPSM thread pitch, matching Sea-Dog hose deck fill bodies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a chain included with the cap?\u003c\/strong\u003e Yes, the 357093-1 blue water cap includes an attachment chain to keep the cap tethered to the deck fill body when it is open.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the cap made from?\u003c\/strong\u003e The 357093-1 is made of fiberglass filled injection molded nylon, so it contains no metal and does not require grounding to the boat's electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 357093-1 cap weigh?\u003c\/strong\u003e The blue water replacement cap weighs 0.096 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cap work with a pressurized fuel or oil injection system?\u003c\/strong\u003e The 357093-1 is intended for water deck fills; consult Sea-Dog's fitment guidance for oil injection compatibility before use on a fuel or oil system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cap be used on a diesel or gas deck fill instead of water?\u003c\/strong\u003e The 357093-1 is color-coded blue specifically for water; for diesel or gas fills, Sea-Dog offers separate green and red replacement caps under different part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the deck fill cap connect to the water tank?\u003c\/strong\u003e The deck fill body connects to the boat's water reservoir through a hose, which is not included with the 357093-1 replacement cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with part 357093-1?\u003c\/strong\u003e The package includes the blue water replacement cap with its built-in key and attachment chain; the deck fill body and mounting hardware are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 357093-1 an OEM Sea-Dog part?\u003c\/strong\u003e Yes, 357093-1 is the genuine Sea-Dog manufacturer part number for the blue water replacement cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cap sit flush with the deck?\u003c\/strong\u003e Yes, the built-in key on the 357093-1 can be recessed into the cap so it sits flush with the deck surface when not in use.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988763881691,"sku":"S-D-357093-1","price":13.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4803_807148d7-15f2-4507-aadc-a787dfa23042.jpg?v=1784439612"},{"product_id":"sea-dog-357094-1-waste-deck-fill-replacement-cap-black-1-7-8in-11-1-2-npsm-for-1-1-2in-hose-deck-fills","title":"Sea-Dog Black Waste Deck Fill Replacement Cap, Keyless, Part 357094-1","description":"\u003cp\u003eThe Sea-Dog 357094-1 is a black replacement cap for waste deck fills, designed to restore a secure, color-coded seal after the original cap is lost, cracked, or worn out. It is molded entirely from fiberglass filled injection molded nylon, so it contains no metal and never requires grounding to the boat's electrical system, eliminating corrosion concerns common with metal deck fill caps.\u003c\/p\u003e\u003cp\u003eThe cap features a built-in key for easy removal and installation. The key can be locked in the upright position for quick opening and closing, or recessed into the cap for a flush surface when not in use. The cap measures 1-7\/8 inches in diameter with an 11-1\/2 NPSM straight thread pitch, matching Sea-Dog waste deck fill bodies. Black is the designated color for waste system deck fills, keeping tank fittings clearly identifiable and helping prevent misidentification and cross-contamination between waste, water, fuel, and gas fill points.\u003c\/p\u003e\u003cp\u003eThis is a cap-only replacement part; it does not include the deck fill body, mounting fasteners, or an attachment chain (chains are included with gas, diesel, and water replacement caps, but not with the waste cap). It is compatible with Sea-Dog hose deck fills and will not work with pressurized oil injection systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 357094-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Waste Deck Fill Replacement Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fiberglass filled injection molded nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment Chain Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Removal:\u003c\/strong\u003e Built-in key, locks upright or recesses flush\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514357074\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Sea-Dog waste hose deck fills using a 1-7\/8 inch diameter, 11-1\/2 NPSM straight thread cap opening. Will not work with pressurized oil injection systems.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 357094-1 cap fit?\u003c\/strong\u003e The Sea-Dog 357094-1 is a replacement cap sized for Sea-Dog waste hose deck fills, with a 1-7\/8 inch diameter and 11-1\/2 NPSM straight thread that matches the deck fill body opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is this cap black?\u003c\/strong\u003e Black is the designated color for waste system deck fills in the Sea-Dog lineup, while red marks gas, green marks diesel, and blue marks water, so the color coding on the 357094-1 helps prevent misidentifying which tank a fitting connects to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 357094-1 cap include an attachment chain?\u003c\/strong\u003e No, the waste replacement cap does not include an attachment chain. Sea-Dog includes attachment chains with the gas, diesel, and water replacement caps, but the waste cap is supplied without one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 357094-1 cap made from?\u003c\/strong\u003e It is molded entirely from fiberglass filled injection molded nylon, so the cap contains no metal and does not require grounding to the boat's electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you open and close the cap?\u003c\/strong\u003e The 357094-1 has a built-in key for easy removal: lock the key in the upright position for quick opening and closing, or recess it into the cap for a flush surface when it is not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cap include the deck fill body?\u003c\/strong\u003e No, the 357094-1 is a cap-only replacement part. The deck fill body itself is a separate part, and mounting fasteners are not included with either.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the thread size on the 357094-1 waste cap?\u003c\/strong\u003e The cap uses an 11-1\/2 NPSM straight thread with a 1-7\/8 inch cap diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cap be used with a pressurized oil injection system?\u003c\/strong\u003e No, Sea-Dog states that these deck fill caps will not work with pressurized oil injection systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 357094-1 cap weigh?\u003c\/strong\u003e The Sea-Dog waste replacement cap weighs 0.09 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 357094-1 an OEM Sea-Dog part or an aftermarket copy?\u003c\/strong\u003e It is a genuine Sea-Dog replacement cap, part number 357094-1, manufactured to match Sea-Dog's own waste deck fill bodies.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988763914459,"sku":"S-D-357094-1","price":13.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4803_8fadd2b9-9ffc-4af5-89d8-06a481453869.jpg?v=1784439614"},{"product_id":"sea-dog-357100-1-gas-tank-vent-black-nylon-marine-fuel-tank-vent-with-5-8-inch-hose-barb","title":"Sea-Dog Gas Tank Vent, Black Injection Molded Nylon, 5\/8 Inch Hose Barb - 357100-1","description":"\u003cp\u003eThe Sea-Dog Gas Tank Vent (357100-1) provides the airflow needed to maintain proper fuel flow while filling and during use. As fuel is consumed and tank levels drop, or as temperature changes cause the fuel and air inside the tank to expand and contract, this vent compensates for those changes so the fuel system stays balanced. It is designed to prevent vacuum build-up during use, which can otherwise disrupt fuel delivery, and it also functions as a pressure release valve for the gas tank. By managing this airflow, the vent helps prevent fuel spills and blow-back, and it ensures fuel fumes vent outboard instead of building up inside the boat.\u003c\/p\u003e\u003cp\u003eAn integral 5\/8 inch hose barb allows the vent to connect securely to vent hose without additional adapters, making it a straightforward fit for standard marine fuel vent lines. The vent is constructed of UV resistant injection molded nylon, so it holds up to sun and weather exposure in a marine environment without becoming brittle over time. It is finished in black. This is a small, lightweight fitting sized for compact vent line installations on boats and portable fuel systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 357100-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Gas Tank Vent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 2-1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Barb Size:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514357012\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sea-Dog 357100-1 gas tank vent do?\u003c\/strong\u003e It lets air flow into and out of a gas tank as fuel is consumed and as temperature changes cause expansion and contraction, keeping fuel flow steady and preventing vacuum build-up that can disrupt delivery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this vent also relieve pressure in the tank?\u003c\/strong\u003e Yes, the 357100-1 vent doubles as a pressure release valve for the gas tank in addition to supplying air during filling and use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the 357100-1 vent fit?\u003c\/strong\u003e It has an integral 5\/8 inch hose barb that connects securely to 5\/8 inch vent hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog gas tank vent made of?\u003c\/strong\u003e The 357100-1 is constructed of UV resistant injection molded nylon, which holds up to sun and weather exposure in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 357100-1?\u003c\/strong\u003e The 357100-1 is black. Sea-Dog also makes this same vent in white under part number 357105-1 for buyers who need a white fitting instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the gas tank vent weigh?\u003c\/strong\u003e The Sea-Dog 357100-1 gas tank vent weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 357100-1 vent?\u003c\/strong\u003e The vent measures 1 inch (A) by 2-1\/8 inch (B) by 1-1\/8 inch (D), with a 5\/8 inch hose barb (C) for the hose connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this vent stop fuel spills and fumes from entering the boat?\u003c\/strong\u003e The 357100-1 is designed to help prevent fuel spills and blow-back and to vent fumes outboard instead of into the boat interior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 357100-1 vent a universal fit?\u003c\/strong\u003e Yes, it is a universal-fit gas tank vent that connects via its 5\/8 inch hose barb rather than being designed for one specific tank or engine model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this vent be used on a portable fuel tank?\u003c\/strong\u003e The 357100-1 gas tank vent is suited for standard vent line installations, including those used with portable and built-in gas tanks that use 5\/8 inch vent hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 357100-1 genuine Sea-Dog, not an aftermarket copy?\u003c\/strong\u003e Yes, part number 357100-1 is a genuine Sea-Dog gas tank vent, sold under the Sea-Dog brand name.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988764012763,"sku":"S-D-357100-1","price":4.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4836.jpg?v=1784428990"},{"product_id":"sea-dog-357090-1-red-gas-keyless-replacement-cap-for-1-1-2-hose-deck-fill","title":"Sea-Dog Red Gas Deck Fill Replacement Cap 357090-1","description":"\u003cp\u003eThe Sea-Dog 357090-1 is a red replacement cap for gas hose deck fills, designed to restore a secure, easy-to-open seal on your boat's gas fill fitting. The cap features a built-in key for effortless removal - lock the key in the upright position for quick access, or recess it into the cap for a flush surface when closed. The cap diameter is 1-7\/8 inches, with an 11-1\/2 NPSM straight thread pitch, matching Sea-Dog's hose deck fill fittings.\u003c\/p\u003e\u003cp\u003eColor-coding is a core safety feature of this cap: the red finish clearly marks the fitting as gas, helping prevent dangerous and costly misfueling that can occur when fill points are not clearly identified. The cap is constructed of fiberglass filled injection molded nylon, so it contains no metal and does not require grounding to the boat's electrical system. It includes an attachment chain to keep the cap tethered to the deck fill body during use. This is a cap-only replacement part; the deck fill body and hose are sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 357090-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Deck Fill Replacement Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFill Type:\u003c\/strong\u003e Gas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fiberglass filled injection molded nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.096 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514357043\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment Chain:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding Required:\u003c\/strong\u003e No (contains no metal)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Sea-Dog hose deck fills using an 11-1\/2 NPSM straight thread with a 1-7\/8 inch cap diameter, gas fill applications.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 357090-1 used for?\u003c\/strong\u003e It is a replacement cap for a gas hose deck fill, sealing the gas fill fitting on a boat's deck and allowing quick access via its built-in key.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is this cap red?\u003c\/strong\u003e Red identifies the fitting as gas on Sea-Dog's color-coded deck fill system, which helps prevent misfueling and the damage that can result from filling the wrong tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 357090-1 cap include the deck fill body?\u003c\/strong\u003e No, 357090-1 is the cap only. Sea-Dog sells the deck fill body separately, so this part is for replacing a lost or damaged gas cap on an existing fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does this cap use?\u003c\/strong\u003e The 357090-1 cap has a 1-7\/8 inch cap diameter with an 11-1\/2 NPSM straight thread pitch, matching Sea-Dog hose deck fill fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the cap made from?\u003c\/strong\u003e It is constructed of fiberglass filled injection molded nylon, a rigid, corrosion-resistant material that does not require electrical grounding since it contains no metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the gas cap include an attachment chain?\u003c\/strong\u003e Yes, the 357090-1 gas replacement cap includes an attachment chain to keep it tethered to the deck fill body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 357090-1 cap weigh?\u003c\/strong\u003e The cap weighs 0.096 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I remove the cap?\u003c\/strong\u003e The 357090-1 cap has a built-in key: lift and lock the key upright to turn and remove the cap, or press it flush into the cap's surface once the cap is closed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cap compatible with pressurized oil injection systems?\u003c\/strong\u003e No. Sea-Dog deck fill caps and fittings, including 357090-1, are not designed to work with pressurized oil injection systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Sea-Dog 357090-1 red gas replacement cap has UPC 035514357043.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from the oil, diesel, water, or waste caps?\u003c\/strong\u003e The 357090-1 is the red gas version; Sea-Dog also makes black oil, green diesel, blue water, and black waste replacement caps in the same style, distinguished by color for fill identification.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988764274907,"sku":"S-D-357090-1","price":13.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4803_285d83e3-8251-4c6d-9228-175eb33459c5.jpg?v=1784439615"},{"product_id":"attwood-1607-3-straight-marine-fuel-tank-vent-5-8-i-d-hose-black-polypropylene","title":"Attwood 1607-3 Straight Fuel Tank Vent, White, 5\/8 Inch I.D. Hose, 3\/4-7\/8 Inch Mounting Hole","description":"\u003cp\u003eThe Attwood 1607-3 is a straight-style marine fuel tank vent designed to let air escape from the fuel tank during fueling and normal operation, preventing pressure buildup, fuel splash-back, and vapor lock. It connects to a 5\/8 inch I.D. Vent hose and mounts through the hull using a 3\/4 inch to 7\/8 inch hole, making it a straightforward fit for both new fuel system installations and replacement of a worn or cracked vent fitting.\u003c\/p\u003e\u003cp\u003eBuilt in White polypropylene, the 1607-3 resists corrosion, UV exposure, and the harsh conditions of continuous seawater and weather exposure, so it holds up to long-term deck or hull mounting without degrading. Its low-profile straight design keeps the exterior finish clean while providing reliable, unobstructed airflow to the fuel tank. As an integrated fuel system component, it is intended to work as part of a properly vented fuel tank setup on recreational boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1607-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Straight Fuel Tank Vent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Connection Size:\u003c\/strong\u003e 5\/8 inch I.D.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 3\/4 inch to 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4.5 x 4.5 x 9.2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1667 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697160737\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for boats using a 5\/8 inch I.D. Fuel vent hose and a 3\/4 inch to 7\/8 inch mounting hole; not limited to a specific make or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the Attwood 1607-3 fit?\u003c\/strong\u003e The 1607-3 connects to a 5\/8 inch I.D. Fuel vent hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole do I need to install this vent?\u003c\/strong\u003e A 3\/4 inch to 7\/8 inch mounting hole is required to install the Attwood 1607-3 fuel tank vent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 1607-3 fuel vent?\u003c\/strong\u003e The Attwood 1607-3 is White.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this vent a straight or angled design?\u003c\/strong\u003e The 1607-3 is a straight-style fuel tank vent, giving a clean, low-profile exterior finish once mounted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the vent made from?\u003c\/strong\u003e It is made from polypropylene, chosen for its resistance to corrosion and prolonged seawater and weather exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this vent used for?\u003c\/strong\u003e The Attwood 1607-3 allows air to escape from a boat's fuel tank during fueling and operation, helping prevent pressure buildup, fuel splash-back, and vapor lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this vent work as a replacement for an old or cracked fuel vent?\u003c\/strong\u003e Yes, the 1607-3 is suited to replacing a worn or cracked fuel tank vent as long as the existing hose is 5\/8 inch I.D. And the mounting hole is 3\/4 inch to 7\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 1607-3?\u003c\/strong\u003e The Attwood 1607-3 measures 4.5 x 4.5 x 9.2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the fuel tank vent weigh?\u003c\/strong\u003e The Attwood 1607-3 weighs 0.1667 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this vent fit a specific boat make or model?\u003c\/strong\u003e The 1607-3 is a universal fuel tank vent fitting any boat with a 5\/8 inch I.D. Vent hose and a 3\/4 inch to 7\/8 inch mounting hole, rather than being limited to one make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type is used on the 1607-3?\u003c\/strong\u003e The Attwood 1607-3 uses NPT thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 1607-3 sold as a single unit?\u003c\/strong\u003e Yes, the 1607-3 fuel tank vent is sold as one piece.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989666803931,"sku":"ATT-1607-3","price":9.81,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-1607-3_lg__91394.1558112694.500.750.jpg?v=1785188279"},{"product_id":"attwood-1670-3-90-degree-p-trap-fuel-tank-vent-black-standard-mount-for-5-8-i-d-hose","title":"Attwood P-Trap 90 Degree Fuel Tank Vent, Black, Standard Mount for 5\/8 Inch Hose - 1670-3","description":"\u003cp\u003eThe Attwood 1670-3 is a 90 degree P-Trap fuel tank vent built to keep water out of the fuel tank while still letting the tank breathe. The trapped-water design in the P-shaped body helps stop water from entering the fuel system during washdowns and normal sea conditions, while the vent continues to allow air to move freely in and out of the tank as fuel is used or added. Because the P-Trap design manages water intrusion at the vent itself, it eliminates the need to run a separate anti-siphon loop in the vent hose, simplifying the plumbing run between the tank and the hull fitting.\u003c\/p\u003e\u003cp\u003eThis is a standard mount vent with a black vent head, sized for use with a 5\/8 inch interior diameter hose. It requires a 3\/4 inch installation hole through the hull or transom and is rated for hulls with a maximum thickness of 9\/16 inch. The vent body is molded from durable plastic for corrosion resistance in the marine environment, and its universal fit type makes it suitable for a wide range of boats using a standard fuel tank vent setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1670-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Standard Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Compatibility:\u003c\/strong\u003e 5\/8 inch interior diameter hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Hole Diameter:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Hull Thickness:\u003c\/strong\u003e 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5 x 9 x 10.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.215 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697167033\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for boats using a standard 5\/8 inch ID fuel vent hose; no specific make, engine, or year restrictions are listed for this vent.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for the Attwood 1670-3.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Attwood 1670-3 fuel tank vent do?\u003c\/strong\u003e The Attwood 1670-3 is a 90 degree P-Trap fuel tank vent that helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1670-3 vent require an anti-siphon loop?\u003c\/strong\u003e No. The P-Trap design of the Attwood 1670-3 eliminates the need for a separate anti-siphon loop in the vent hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does this vent use?\u003c\/strong\u003e The Attwood 1670-3 is designed for use with a 5\/8 inch interior diameter hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size installation hole is needed?\u003c\/strong\u003e Mounting the Attwood 1670-3 requires a 3\/4 inch installation hole through the hull or transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a maximum hull thickness for this vent?\u003c\/strong\u003e Yes, the Attwood 1670-3 is rated for a maximum hull thickness of 9\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 1670-3 vent head?\u003c\/strong\u003e The Attwood 1670-3 has a black vent head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a standard mount or angled mount vent?\u003c\/strong\u003e The Attwood 1670-3 is a standard mount fuel tank vent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 1670-3 made from?\u003c\/strong\u003e It is made from durable plastic suited to the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Attwood 1670-3 fit any boat?\u003c\/strong\u003e The 1670-3 has a universal fit type and is intended for boats using a standard 5\/8 inch ID fuel vent hose setup; no specific make or model restrictions are listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuel type is the 1670-3 vent rated for?\u003c\/strong\u003e The Attwood 1670-3 is rated for use with gasoline fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 1670-3 fuel vent?\u003c\/strong\u003e The Attwood 1670-3 measures 5 x 9 x 10.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 1670-3 weigh?\u003c\/strong\u003e The Attwood 1670-3 weighs 0.215 pounds.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989666836699,"sku":"ATT-1670-3","price":15.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-1670-3_lg__54744.1558112778.500.750.jpg?v=1785189136"},{"product_id":"attwood-66074-3-deck-fill-replacement-cap-and-chain-316-stainless-steel-fits-66126-deck-fill","title":"Attwood 66074-3 Replacement Deck Fill Cap and Chain, Fits Attwood 66126","description":"\u003cp\u003eThe Attwood 66074-3 is a replacement cap and chain designed specifically to fit Attwood deck fill 66126. If the original cap on your 66126 deck fill has been lost, cracked, or worn out, this part restores a secure, watertight closure without requiring you to replace the entire deck fill assembly.\u003c\/p\u003e\u003cp\u003eThe cap is machined from enhanced 316 stainless steel alloy and finished with a high-polish surface for a clean, corrosion-resistant appearance on deck hardware. The flush cap is slotted so it can be opened and closed with a separate key (key sold separately), and it features an O-ring that seals the cap watertight when secured. The cap attaches to the deck fill body with an included stainless steel beaded chain, so it stays with the boat and cannot be misplaced during fueling or servicing.\u003c\/p\u003e\u003cp\u003eThis is a direct replacement part, not a full deck fill kit -- it includes only the cap and chain. It is intended for use on the Attwood 66126 deck fill.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 66074-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Attwood deck fill 66126\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Enhanced 316 stainless steel alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High-polish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Twist-on, slotted for separate key\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal:\u003c\/strong\u003e O-ring for watertight closure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment:\u003c\/strong\u003e Stainless steel beaded chain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey:\u003c\/strong\u003e Sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2388 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697660749\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAttwood deck fill 66126\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Attwood 66074-3 replacement cap fit?\u003c\/strong\u003e The Attwood 66074-3 is a replacement cap and chain made specifically for the Attwood deck fill 66126.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the key included with this cap?\u003c\/strong\u003e No, the key is sold separately from the Attwood 66074-3 cap and chain; the cap is slotted to accept a separate key.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 66074-3 cap made from?\u003c\/strong\u003e It is made from enhanced 316 stainless steel alloy with a high-polish finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cap stay attached to the deck fill?\u003c\/strong\u003e A stainless steel beaded chain connects the 66074-3 cap to the deck fill body so it cannot be lost.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 66074-3 cap seal watertight?\u003c\/strong\u003e Yes, an O-ring on the cap creates a watertight seal when the 66074-3 cap is closed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of closure does this cap use?\u003c\/strong\u003e The 66074-3 is a flush, twist-on cap that is slotted for opening and closing with a separate key.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 66074-3 weigh?\u003c\/strong\u003e The 66074-3 replacement cap and chain weighs 0.2388 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The UPC for the Attwood 66074-3 cap and chain is 022697660749.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this replace the entire deck fill or just the cap?\u003c\/strong\u003e The 66074-3 includes only the replacement cap and chain for the 66126 deck fill, not the full deck fill assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Attwood part?\u003c\/strong\u003e Yes, the 66074-3 is manufactured by Attwood as a direct replacement cap and chain for the 66126 deck fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the cap have?\u003c\/strong\u003e The 66074-3 has a high-polish stainless steel finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace just the cap and chain?\u003c\/strong\u003e If the original cap on an Attwood 66126 deck fill is lost, cracked, or no longer seals properly, the 66074-3 replaces just the cap and chain without needing a new deck fill.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989672734939,"sku":"ATT-66074-3","price":27.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-66074-3_lg_1__25476.1558110538.500.750.jpg?v=1785188487"},{"product_id":"attwood-66419-3-fuel-tank-vent-5-8-i-d-hose-90-degree-black-with-stainless-steel-trim-meets-abyc","title":"Attwood 66419-3 Composite 90 Degree Fuel Tank Vent, Standard Mount, 5\/8 Inch I.D. Hose, Black with Stainless Steel Trim Cover","description":"\u003cp\u003eThe Attwood 66419-3 is a 90 degree composite fuel tank vent fitting built for standard mount installation on 5\/8 inch I.D. Hose. It allows air to vent freely from the boat's fuel tank as it is filled and during normal sea conditions and washdowns, while helping prevent water from entering the tank. The 90 degree elbow design and standard mount base let the vent be routed through the hull or transom at the fitting's built-in angle, eliminating the need for an anti-siphon loop in the vent hose. The body is a splash-resistant, corrosion-resistant composite (plastic) construction finished in black, paired with a stainless steel trim cover on the vent head for a durable, marine-grade exterior finish. This vent connects to 5\/8 inch I.D. Hose and is intended for fuel systems using gasoline. It carries UPC 022697006448 for easy identification when ordering or cross-checking at the parts counter.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 66419-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Fuel Tank Vent Fitting, 90 Degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Standard Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Connection:\u003c\/strong\u003e 5\/8 inch I.D. Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Composite (plastic) body with stainless steel trim cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Black with stainless steel vent head cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9 x 5 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1833 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697006448\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Attwood 66419-3 fuel tank vent do?\u003c\/strong\u003e It vents air from the boat's fuel tank as the tank is filled and during normal sea conditions and washdowns, while helping prevent water from entering the fuel tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the 66419-3 fit?\u003c\/strong\u003e The Attwood 66419-3 connects to 5\/8 inch I.D. Hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a flush mount or standard mount vent?\u003c\/strong\u003e The 66419-3 is a standard mount fitting, not a flush mount design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle is the vent body?\u003c\/strong\u003e It is a 90 degree fitting, allowing the vent hose to be routed at a right angle from the mounting point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 66419-3 eliminate the need for an anti-siphon loop?\u003c\/strong\u003e Yes, using this vent eliminates the need for an anti-siphon loop in the vent hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the vent cover made of?\u003c\/strong\u003e The Attwood 66419-3 has a black composite body with a stainless steel trim cover on the vent head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 66419-3 weigh?\u003c\/strong\u003e It weighs 0.1833 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuel types is this vent rated for?\u003c\/strong\u003e The 66419-3 is intended for use with gasoline fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this vent work with diesel or only gasoline?\u003c\/strong\u003e The Attwood 66419-3 is specified for gasoline fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 66419-3?\u003c\/strong\u003e The listed item dimensions for the Attwood 66419-3 are 9 x 5 x 1.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 66419-3 corrosion resistant?\u003c\/strong\u003e Yes, it is a splash-resistant and corrosion-resistant composite fitting, suitable for marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 66419-3?\u003c\/strong\u003e The UPC for the Attwood 66419-3 fuel tank vent is 022697006448.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989672997083,"sku":"ATT-66419-3","price":14.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-66419-3_large__64347.1558177994.500.750.jpg?v=1785188835"},{"product_id":"attwood-8803lp2-3-gallon-portable-marine-fuel-tank-epa-carb-certified-without-gauge","title":"Attwood 8803LP2 3-Gallon Portable Marine Fuel Tank, Without Gauge, EPA\/CARB Certified","description":"\u003cp\u003eThe Attwood 8803LP2 is a 3-gallon portable marine fuel tank built for outboard-powered boats that need reliable, code-compliant fuel storage on board. Molded from high density polyethylene (HDPE) using automotive-grade multi-layer construction, the tank is engineered to withstand the pressure of a closed fuel system as well as sun exposure, temperature swings, and the general wear of regular marine use. Low-permeation wall construction limits fuel evaporation and vapor loss, helping the tank meet EPA and CARB emissions requirements while also meeting ABYC standards for portable marine fuel tanks.\u003c\/p\u003e\u003cp\u003eAn automatic vacuum valve keeps fuel flowing at a consistent rate without the driver having to manually vent or adjust the tank while underway. The tank connects using standard 1\/4 inch NPT fittings, so it installs with common marine fuel line hardware without special adapters. This version of the 8803LP2 does not include a fuel gauge; a gauge-equipped version is sold separately under a different part number. At 16.6 x 11.45 x 7.3 inches and holding 3 gallons, it is sized to fit typical under-console or in-hull storage on small to mid-size outboard boats, and it adapts to virtually any outboard engine.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8803LP2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 3 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge:\u003c\/strong\u003e Without gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 16.6 x 11.45 x 7.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.55 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e 1\/4 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e EPA and CARB certified, meets ABYC standards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Year Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e 714777\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697088031\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eAdapts to virtually any outboard engine as a portable fuel supply tank.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e714777\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons does the Attwood 8803LP2 hold?\u003c\/strong\u003e The Attwood 8803LP2 is a 3-gallon portable fuel tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this tank come with a fuel gauge?\u003c\/strong\u003e No, the 8803LP2 is the without-gauge version; a gauge-equipped tank of the same size is sold as a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fittings does the 8803LP2 use?\u003c\/strong\u003e It is compatible with standard 1\/4 inch NPT fittings for the fuel line connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 8803LP2 EPA and CARB compliant?\u003c\/strong\u003e Yes, the 8803LP2 is tested to meet EPA and CARB requirements as well as ABYC standards for portable marine fuel tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the tank made from?\u003c\/strong\u003e The 8803LP2 is molded from high density polyethylene (HDPE) using automotive-grade multi-layer construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this fuel tank?\u003c\/strong\u003e The Attwood 8803LP2 measures 16.6 x 11.45 x 7.3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the tank weigh?\u003c\/strong\u003e The 8803LP2 weighs 4.55 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the tank need to be manually vented while running?\u003c\/strong\u003e No, an automatic vacuum valve on the 8803LP2 keeps fuel flowing consistently without manual venting or adjustment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines is the Attwood 8803LP2 compatible with?\u003c\/strong\u003e It is designed to adapt to virtually any outboard engine as a portable fuel supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent part number for this tank?\u003c\/strong\u003e Yes, the Attwood 8803LP2 has an OEM equivalent part number of 714777.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the warranty on the 8803LP2?\u003c\/strong\u003e The Attwood 8803LP2 is covered by a 2 year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the low-permeation construction reduce fuel smell or evaporation?\u003c\/strong\u003e Yes, the 8803LP2 uses low-permeation tank construction that minimizes fuel evaporation and loss compared to standard tanks.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989674307803,"sku":"ATT-8803LP2","price":69.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-8803lp2_lg__45503.1558141046.500.750.jpg?v=1785188875"},{"product_id":"attwood-8812lpg2-12-gallon-portable-marine-fuel-tank-with-gauge-epa-carb-certified","title":"Attwood 8812LPG2 12 Gallon Portable Marine Fuel Tank with Fuel Gauge, EPA and CARB Certified","description":"\u003cp\u003eThe Attwood 8812LPG2 is a 12 gallon portable marine fuel tank built for boats that need reliable, code-compliant fuel storage on board. Constructed from automotive-grade, multi-layer high density polyethylene (HDPE), the tank withstands the internal pressure of a closed fuel system while resisting the temperature swings and rough handling common on the water. An integrated fuel gauge lets you monitor fuel level at a glance without disconnecting lines or guessing at remaining range.\u003c\/p\u003e\u003cp\u003eFuel management is handled by an automatic vacuum valve, which maintains steady fuel flow to the engine without any manual venting or adjustment during operation. The tank's low-permeation material construction minimizes fuel evaporation and loss over time, and the tank is tested to meet EPA and CARB emissions requirements as well as ABYC standards for portable marine fuel tanks, so it is ready for use in states and situations with strict evaporative-emissions rules.\u003c\/p\u003e\u003cp\u003eThe tank uses standard 1\/4 inch NPT fittings, allowing it to connect to common marine fuel line and fitting hardware for straightforward installation. Its brushed HDPE exterior resists scuffing and UV exposure typical of open-deck storage. This is a universal-fit portable tank, suited to outboard and other boats that use portable fuel tanks rather than a permanently installed system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8812LPG2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Portable Fuel Tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 12 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Diesel, Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e 1\/4 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Brushed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 22.75 x 14.5 x 14.47 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 12 Gallon Tank (with gauge)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e EPA and CARB certified, meets ABYC standards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Warranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697881243\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fuel capacity of the Attwood 8812LPG2?\u003c\/strong\u003e The Attwood 8812LPG2 holds 12 gallons of fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this tank include a fuel gauge?\u003c\/strong\u003e Yes, the 8812LPG2 is the version of Attwood's 12 gallon portable tank that comes with an integrated fuel gauge, so you can check fuel level without opening the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fittings does the 8812LPG2 use?\u003c\/strong\u003e It is compatible with standard 1\/4 inch NPT fittings, allowing it to connect to common marine fuel line hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 8812LPG2 EPA and CARB certified?\u003c\/strong\u003e Yes, this tank is tested and certified to meet both EPA and CARB requirements for portable marine fuel tanks, and it also meets ABYC standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the tank made from?\u003c\/strong\u003e The 8812LPG2 is made from high density polyethylene (HDPE) with a multi-layer, automotive-grade construction and a brushed exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this tank hold diesel as well as gasoline?\u003c\/strong\u003e Yes, the Attwood 8812LPG2 is rated for both diesel and gasoline fuel types.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the tank weigh?\u003c\/strong\u003e The Attwood 8812LPG2 weighs 11.3 pounds empty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 8812LPG2?\u003c\/strong\u003e The tank measures 22.75 x 14.5 x 14.47 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the tank require manual venting during use?\u003c\/strong\u003e No, the 8812LPG2 uses an automatic vacuum valve that maintains steady fuel flow without manual venting or adjustment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this tank fit any boat?\u003c\/strong\u003e The Attwood 8812LPG2 is a universal-fit portable fuel tank, not tied to a specific engine or boat model, making it suitable wherever a portable fuel tank is used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the warranty on this tank?\u003c\/strong\u003e The Attwood 8812LPG2 carries a 90 day manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the 8812LPG2?\u003c\/strong\u003e You receive one 12 gallon Attwood fuel tank with the built-in gauge included.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989674930395,"sku":"ATT-8812LPG2","price":239.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-8812lpg2_large__49406.1558141139.500.750.jpg?v=1785188328"},{"product_id":"attwood-8806lpg2-6-gallon-portable-marine-fuel-tank-epa-and-carb-certified-hdpe-no-gauge-single-pack","title":"Attwood 8806LPG2 6-Gallon Portable Marine Fuel Tank without Gauge, EPA\/CARB Compliant, OEM 714780 Equivalent","description":"\u003cp\u003eThe Attwood 8806LPG2 is a 6-gallon portable marine fuel tank built for boats that need reliable, self-contained fuel storage without a built-in fuel gauge. It is constructed from high density polyethylene (HDPE) using automotive-grade multi-layer construction designed to withstand the pressure of closed fuel systems and hold up under extreme temperature swings and heavy use. The tank uses low-permeation technology to minimize fuel evaporation and loss, and it is fitted with an automatic vacuum valve that keeps fuel flowing steadily without manual venting or adjustment. It is compatible with standard 1\/4 inch NPT fittings for straightforward installation and connection to your existing fuel line hardware. The 8806LPG2 is tested to meet EPA and CARB requirements and ABYC standards for portable marine fuel tanks, making it a compliant choice for gasoline-powered boats. It is sold as a single tank (single-pack) measuring 19.82 inches by 13.50 inches by 9.16 inches and weighing 6 pounds. This is the without-gauge version of Attwood's 6-gallon tank; buyers who want a built-in fuel level gauge should look for the 8806LP2 model, which is a separate part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8806LPG2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 6 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 19.82 inches x 13.50 inches x 9.16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge:\u003c\/strong\u003e Without gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Size:\u003c\/strong\u003e 1\/4 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVent System:\u003c\/strong\u003e Automatic vacuum valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e EPA and CARB certified, meets ABYC standards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Type:\u003c\/strong\u003e Single-pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697880604\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e 714780\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal fit for gasoline-powered boats using standard 1\/4 inch NPT portable fuel tank fittings\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e714780\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons does the Attwood 8806LPG2 hold?\u003c\/strong\u003e The Attwood 8806LPG2 has a capacity of 6 gallons of gasoline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 8806LPG2 come with a fuel gauge?\u003c\/strong\u003e No, the 8806LPG2 is the without-gauge version of Attwood's 6-gallon portable fuel tank. Attwood also makes the 8806LP2 with a built-in gauge as a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this fuel tank?\u003c\/strong\u003e The Attwood 8806LPG2 measures 19.82 inches long by 13.50 inches wide by 9.16 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the tank made from?\u003c\/strong\u003e High density polyethylene (HDPE) with automotive-grade multi-layer construction, used in the Attwood 8806LPG2 to withstand pressure in closed fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the tank weigh?\u003c\/strong\u003e 6 pounds is the weight of the Attwood 8806LPG2 portable fuel tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 8806LPG2 EPA and CARB compliant?\u003c\/strong\u003e Yes, the Attwood 8806LPG2 is tested to meet EPA and CARB requirements and ABYC standards for portable marine fuel tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fitting does this tank use?\u003c\/strong\u003e Standard 1\/4 inch NPT fittings are used on the Attwood 8806LPG2 for connecting fuel line hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM cross-reference number for the 8806LPG2?\u003c\/strong\u003e 714780 is the OEM equivalent part number for the Attwood 8806LPG2 fuel tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this tank fit any particular boat make or engine?\u003c\/strong\u003e The Attwood 8806LPG2 has a universal fit for gasoline-powered boats and is not limited to a specific make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the automatic vacuum valve work?\u003c\/strong\u003e The 8806LPG2 uses an automatic vacuum valve that maintains steady fuel flow without requiring manual venting or adjustment during use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'single-pack' mean for this listing?\u003c\/strong\u003e Single-pack means the Attwood 8806LPG2 is sold as one individual 6-gallon tank rather than a multi-unit case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the 8806LPG2?\u003c\/strong\u003e The Attwood 8806LPG2 carries a 2 year warranty from the manufacturer.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989675290843,"sku":"ATT-8806LPG2","price":88.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-8806lpg2_lg_1__77125.1722492086.500.750.jpg?v=1785188124"},{"product_id":"attwood-8806lpg2s-6-gallon-portable-marine-fuel-tank-with-gauge-epa-carb-certified","title":"Attwood 8806LPG2S 6-Gallon Portable Marine Fuel Tank with Gauge","description":"\u003cp\u003eThe Attwood 8806LPG2S is a 6-gallon portable marine fuel tank built for boats that need reliable, self-contained fuel storage, such as smaller outboard-powered boats or as a backup tank on larger vessels. The tank is molded from high density polyethylene (HDPE) using automotive-grade multi-layer construction that withstands pressure in a closed fuel system and is designed to hold up under temperature swings, sun exposure, and heavy day-to-day use. Low-permeation wall construction reduces fuel evaporation and loss during storage, keeping fuel fresher and cutting down on vapor odor.\u003c\/p\u003e\u003cp\u003eThis tank includes a built-in fuel gauge so you can check remaining fuel at a glance without disconnecting or lifting the tank, and it is fitted with an automatic vacuum valve that maintains steady fuel flow to the engine without manual venting or adjustment. It uses standard 1\/4 inch NPT fittings for straightforward connection to fuel lines and primer bulbs. The tank is EPA and CARB certified and built to meet ABYC standards for portable marine fuel tanks, so it is legal for use across all 50 states. It ships as a single tank (single-pack) measuring 19.82 inches by 13.50 inches by 9.16 inches.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8806LPG2S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 6 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Gauge:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 19.82 inches x 13.50 inches x 9.16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.5625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e 1\/4 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVent System:\u003c\/strong\u003e Automatic vacuum valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e EPA and CARB certified, meets ABYC standards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Single-pack (1 tank)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697088062\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons does the Attwood 8806LPG2S hold?\u003c\/strong\u003e The Attwood 8806LPG2S holds 6 gallons of gasoline, making it a compact portable fuel tank suited to smaller outboard boats or as a backup supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this tank come with a fuel gauge?\u003c\/strong\u003e Yes, the 8806LPG2S includes a built-in fuel gauge so you can check the remaining fuel level without disconnecting or opening the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 8806LPG2S fuel tank?\u003c\/strong\u003e This tank measures 19.82 inches long by 13.50 inches wide by 9.16 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 8806LPG2S weigh?\u003c\/strong\u003e The tank weighs 6.5625 pounds empty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the tank made from?\u003c\/strong\u003e High density polyethylene (HDPE) is used for the tank body, with automotive-grade multi-layer construction designed to withstand pressure in a closed fuel system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fitting does the 8806LPG2S use?\u003c\/strong\u003e It is compatible with standard 1\/4 inch NPT fittings for connecting fuel lines and primer bulbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 8806LPG2S legal for use in all states, including California?\u003c\/strong\u003e Yes, the Attwood 8806LPG2S is EPA and CARB certified and built to meet ABYC standards for portable marine fuel tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the tank require manual venting while running?\u003c\/strong\u003e No, the 8806LPG2S has an automatic vacuum valve that maintains steady fuel flow to the engine without manual venting or adjustment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuel type is this tank designed for?\u003c\/strong\u003e The Attwood 8806LPG2S is designed for gasoline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 8806LPG2S packaged?\u003c\/strong\u003e It ships as a single tank (single-pack), not as a multi-unit case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the low-permeation construction actually reduce fuel smell or loss?\u003c\/strong\u003e Yes, the tank uses low-permeation wall construction that minimizes fuel evaporation and loss during storage, which also helps reduce vapor odor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this tank a universal fit for boats?\u003c\/strong\u003e Yes, the Attwood 8806LPG2S is a universal-fit portable fuel tank suitable for boats generally, rather than being designed for one specific make or model.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989675323611,"sku":"ATT-8806LPG2S","price":90.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ATT-8806LPG2S-Tank-1__39288.1739477319.500.750.jpg?v=1785188876"},{"product_id":"attwood-911526-1-black-p-trap-fuel-tank-vent-cover-replacement-for-standard-mount-1670-marine-fuel-vents","title":"Attwood Black P-Trap Fuel Tank Vent Replacement Cover, Fits Vent 1670","description":"\u003cp\u003eThe Attwood 911526-1 is a replacement cover for standard mount P-trap fuel tank vents, designed as a direct fit for vent model 1670. It restores proper function to your boat's fuel tank ventilation system by letting air escape freely from the tank as you refuel, which prevents backpressure and the fuel spit-back that can happen when a vent is clogged, cracked, or missing its cover.\u003c\/p\u003e\u003cp\u003eBeyond simple airflow, the cover's P-trap design blocks water, sea spray, and washdown spray from entering the fuel tank, keeping contaminants out while the vent continues to breathe. Because the P-trap geometry already manages water intrusion, installing this cover lets you eliminate the bulky anti-siphon loop that standard mount vent lines typically require in the hose run, simplifying the installation.\u003c\/p\u003e\u003cp\u003eThe cover is molded in black plastic built to withstand the marine environment, resisting UV exposure, chemical contact, and saltwater spray over time. It is sized as a single replacement component, not a full vent assembly, so it is intended for boat owners replacing a worn, cracked, or missing cover on an existing standard mount P-trap vent rather than installing a new vent fitting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 911526-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Vent Model:\u003c\/strong\u003e 1670\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3 x 2.25 x 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAttwood standard mount P-trap fuel tank vent, model 1670\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Attwood 911526-1 fit?\u003c\/strong\u003e The Attwood 911526-1 is a replacement cover made for standard mount P-trap fuel tank vents, specifically vent model 1670.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cover stop water from entering the fuel tank?\u003c\/strong\u003e Yes, the 911526-1 cover uses a P-trap design that blocks water, sea spray, and washdown spray from entering the fuel tank while still allowing the tank to vent air freely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I still need an anti-siphon loop with this vent cover installed?\u003c\/strong\u003e No, the P-trap design of the Attwood 911526-1 is built to eliminate the need for a separate anti-siphon loop in the vent hose on a standard mount setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this vent cover made of?\u003c\/strong\u003e The 911526-1 is molded from black plastic that resists UV exposure, chemical contact, and saltwater spray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Attwood 911526-1 vent cover?\u003c\/strong\u003e It is black, matching Attwood's standard mount P-trap vent hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many covers come in one package?\u003c\/strong\u003e One Attwood 911526-1 vent cover is included per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 911526-1 a full vent fitting or just the cover?\u003c\/strong\u003e It is a replacement cover component for an existing standard mount P-trap vent (vent model 1670), not a complete new vent fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this vent cover?\u003c\/strong\u003e The Attwood 911526-1 measures 3 x 2.25 x 1.25 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 911526-1 vent cover weigh?\u003c\/strong\u003e It weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I replace my P-trap vent cover?\u003c\/strong\u003e A cracked, worn, or missing cover on a vent 1670 fuel tank vent can let water in or restrict airflow, so the 911526-1 restores the vent's water-blocking and free-venting function.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989676372187,"sku":"ATT-911526-1","price":6.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71xHbpT15UL.jpg?v=1784487187"},{"product_id":"moeller-18-gallon-topside-marine-fuel-tank-mpn-031618","title":"Moeller Marine 18 Gallon Topside Fuel Tank, Permanent Fuel Tank, Part Number 031618","description":"\u003cp\u003eThe Moeller Marine 031618 is an 18 gallon topside fuel tank built for permanent installation in a boat's fuel system. As part of Moeller's Permanent Fuel Tanks line, it is designed to be mounted topside and plumbed into the vessel's fuel supply rather than used as a portable, remove-and-refill tank. At 16.96 pounds empty, it is sized to hold a substantial fuel reserve while remaining light enough for standard topside mounting in a boat's engine compartment or dedicated tank bay. This tank is identified by Moeller Marine part number 031618 and UPC 739729018248, making it straightforward to confirm you are ordering the correct 18 gallon capacity unit for your fuel system upgrade or replacement project.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 031618\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 18 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Topside Fuel Tank (Permanent Fuel Tank category)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16.96 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729018248\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fuel capacity of the Moeller Marine 031618 tank?\u003c\/strong\u003e The Moeller Marine 031618 fuel tank holds 18 gallons of fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fuel tank weigh?\u003c\/strong\u003e The Moeller Marine 18 gallon topside fuel tank (part number 031618) weighs 16.96 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 031618 tank a portable or permanent fuel tank?\u003c\/strong\u003e It is a topside fuel tank listed under Moeller Marine's Permanent Fuel Tanks category, meaning it is intended for fixed, plumbed-in installation rather than portable use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho manufactures this 18 gallon fuel tank?\u003c\/strong\u003e This fuel tank is manufactured by Moeller Marine under part number 031618.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this tank?\u003c\/strong\u003e The Moeller Marine 18 gallon topside fuel tank carries manufacturer part number 031618.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC should I reference when ordering this fuel tank?\u003c\/strong\u003e The Moeller Marine 031618 fuel tank is identified by UPC 739729018248.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this tank be used as the primary fuel supply for a boat?\u003c\/strong\u003e Yes, the 031618 is categorized as a Permanent Fuel Tank, designed for use as a fixed, plumbed-in fuel supply tank rather than a temporary or auxiliary tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this tank designed for topside mounting?\u003c\/strong\u003e Yes, the Moeller Marine 031618 is an 18 gallon topside fuel tank designed for topside installation within the vessel's fuel system.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991078875355,"sku":"MOE-031618","price":629.58,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/361618__93468.1722488391.500.750.jpg?v=1785329131"},{"product_id":"moeller-marine-14-gallon-topside-marine-fuel-tank-mpn-031615-direct-sight-gauge-for-boats-built-before-2011","title":"Moeller Marine 14 Gallon Topside Fuel Tank with Direct Sight Gauge, Part 031615","description":"\u003cp\u003eThe Moeller Marine 031615 is a 14 gallon topside permanent fuel tank built for boats built before 2011. It is rotationally molded from cross-linked polyethylene with UV-stabilized resin, giving it a rigid, corrosion-resistant construction designed to handle today's highly corrosive ethanol fuels without degrading. The tank includes a direct sight gauge so boat owners can visually check fuel level without a separate gauge sender, along with a fill cap (part 305185) and a withdrawal fitting (part 031615PU) sized 3\/8 inch NPT x 1\/4 inch NPT. Measuring 43.00 inches long by 15.00 inches wide by 8.71 inches high with the cap installed, this tank is intended for topside mounting in bench style, center console, pontoon, deck, and jon boat layouts. Construction conforms to ABYC, NMMA, and U.S. Coast Guard regulations for permanent marine fuel tanks. As a topside-mount design, it sits above deck level rather than under a console or in a below-deck compartment, making it a straightforward swap for aging topside tanks on older boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 031615\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 14 gallons (53 liters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 43.00 inches (1092 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 15.00 inches (381 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 8.71 inches (221 mm), measured with cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Part Number:\u003c\/strong\u003e 305185\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWithdrawal Fitting Part Number:\u003c\/strong\u003e 031615PU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Size:\u003c\/strong\u003e 3\/8 inch NPT x 1\/4 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rotationally molded, cross-linked polyethylene with UV-stabilized resin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 19 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor boats built before 2011\u003c\/li\u003e\n\u003cli\u003eTopside mounting in bench style, center console, pontoon, deck, and jon boat designs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons does the Moeller 031615 fuel tank hold?\u003c\/strong\u003e The Moeller 031615 topside fuel tank has a 14 gallon (53 liter) capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is this fuel tank designed for?\u003c\/strong\u003e Moeller part 031615 is designed for boats built before 2011 and is intended for topside mounting in bench style, center console, pontoon, deck, and jon boat layouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 031615 tank?\u003c\/strong\u003e With the cap installed, the tank measures 43.00 inches long by 15.00 inches wide by 8.71 inches high (1092 mm x 381 mm x 221 mm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 031615 fuel tank weigh?\u003c\/strong\u003e The Moeller 031615 weighs 19 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Moeller 031615 tank made from?\u003c\/strong\u003e It is rotationally molded from cross-linked polyethylene with UV-stabilized resin, a construction chosen to resist today's corrosive ethanol fuels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this tank include a fuel gauge?\u003c\/strong\u003e Yes, the 031615 tank has a direct sight gauge built in, letting you check fuel level visually without a separate gauge sender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the fittings on the 031615 tank?\u003c\/strong\u003e The withdrawal fitting (part 031615PU) is sized 3\/8 inch NPT x 1\/4 inch NPT.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for the fill cap on this tank?\u003c\/strong\u003e The fill cap used on the Moeller 031615 tank is part 305185.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Moeller 031615 tank approved for marine use?\u003c\/strong\u003e Yes, construction conforms to ABYC, NMMA, and U.S. Coast Guard regulations for permanent marine fuel tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the 031615 tank meant to be mounted?\u003c\/strong\u003e It is a topside fuel tank, meaning it mounts above deck level rather than below deck or under a console.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the withdrawal fitting included with the tank?\u003c\/strong\u003e Yes, the 031615PU withdrawal fitting and the 305185 cap are part of the Moeller 031615 tank assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this tank handle ethanol-blended fuel?\u003c\/strong\u003e Yes, the Moeller 031615 is constructed to handle today's highly corrosive ethanol fuels without degrading.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991078973659,"sku":"MOE-031615","price":623.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/031615__36003.1722504453.500.750.jpg?v=1785188959"},{"product_id":"moeller-marine-032524-below-deck-permanent-marine-fuel-tank-24-gallon-port-side-withdraw","title":"Moeller Marine 24 Gallon Below Deck Permanent Fuel Tank, Port Side Withdraw (032524)","description":"\u003cp\u003eThe Moeller Marine 032524 is a 24 gallon (91 liter) below-deck permanent fuel tank built for installation beneath a boat's deck or in a dedicated fuel tank compartment. It is constructed of plastic and designed with a port side fuel withdraw configuration, meaning the fuel pickup and fitting are located on the port side of the tank rather than the starboard side or the center. This makes it suited for boat layouts where the fuel line and pickup need to route from the port side of the hull.\u003c\/p\u003e\u003cp\u003eAs a permanent (non-portable) tank, the 032524 is intended for a fixed, below-deck mounting position rather than being moved in and out of the boat like a portable fuel tank. It measures 51.00 in. L x 8.75 in. W x 20.63 in. H (1295 mm L x 222 mm W x 524 mm H) and weighs 22 pounds empty, and is rated for gasoline fuel systems. A matching tie-down bracket, part number 300110, is associated with this tank for securing it in place during installation.\u003c\/p\u003e\u003cp\u003eBecause fuel tank installation position and withdraw side directly affect fuel line routing, boat owners should confirm their existing tank's withdraw side and footprint before ordering to make sure the port side withdraw configuration of the 032524 matches their boat's fuel system layout.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 032524\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 24 gallons (91 liters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 51.00 in. L x 8.75 in. W x 20.63 in. H (1295 mm L x 222 mm W x 524 mm H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Withdraw Side:\u003c\/strong\u003e Port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Below deck, permanent mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Tie-Down Bracket:\u003c\/strong\u003e 300110\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a below-deck permanent fuel tank intended for boats requiring a port side fuel withdraw configuration; confirm your boat's existing tank footprint and withdraw side before ordering.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fuel capacity of the Moeller Marine 032524 tank?\u003c\/strong\u003e The Moeller Marine 032524 holds 24 gallons (91 liters) of fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 032524 tank withdraw fuel from the port or starboard side?\u003c\/strong\u003e The 032524 is a port side withdraw tank, meaning the fuel pickup and fitting are located on the port side. It is not configured for starboard-side withdraw, so confirm your boat's fuel line routing matches a port side pickup before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 032524 fuel tank?\u003c\/strong\u003e The 032524 measures 51.00 in. L x 8.75 in. W x 20.63 in. H (1295 mm L x 222 mm W x 524 mm H).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 032524 fuel tank weigh?\u003c\/strong\u003e The Moeller Marine 032524 weighs 22 pounds empty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 032524 fuel tank made of?\u003c\/strong\u003e It is constructed of plastic, per Moeller Marine's specifications for the 032524 below-deck fuel tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 032524 a portable or permanent fuel tank?\u003c\/strong\u003e It is a permanent, below-deck fuel tank meant for fixed installation, not a portable tank that gets carried in and out of the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuel type is the 032524 tank designed for?\u003c\/strong\u003e The 032524 is designed for gasoline fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a tie-down bracket for the 032524 tank?\u003c\/strong\u003e Yes, tie-down bracket part number 300110 is associated with the Moeller Marine 032524 for securing the tank during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 032524 fuel tank?\u003c\/strong\u003e The 032524 is the below-deck permanent fuel tank itself, port side withdraw configuration, 24 gallon capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 032524 fit any boat below-deck fuel compartment?\u003c\/strong\u003e The 032524 fits below-deck compartments sized for its 51.00 in. L x 8.75 in. W x 20.63 in. H footprint and requiring a port side fuel withdraw; measure your existing compartment and withdraw side before ordering.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991084609755,"sku":"MOE-032524","price":555.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/moe-032524__96509.1558173645.500.750.jpg?v=1785189061"},{"product_id":"moeller-marine-032512-below-deck-permanent-fuel-tank-12-gallon-24-5-x-18-5-x-9-75-in-fits-boats-built-before-2011","title":"Moeller Marine 12 Gallon Below Deck Permanent Fuel Tank, Aluminum Withdrawal Fitting - Part 032512","description":"\u003cp\u003eThe Moeller Marine 032512 is a 12 gallon (45 liter) below-deck permanent fuel tank built for boats built before 2011. It measures 24.50 in. L x 18.50 in. W x 9.75 in. H (622 mm L x 470 mm W x 248 mm H) and is molded from plastic with the fill neck and the withdrawal and vent fittings built directly into the shell, eliminating separate fitting seams that can loosen or leak over time. Fuel withdrawal is handled by a machined aluminum 3\/8 inch fitting with a 360 degree swivel poplock, which lets the hose connection rotate for easier hook-up in tight below-deck installations. The tank body itself is ethanol and biodiesel corrosion and pit resistant, suited to modern blended fuels that degrade older tank materials.\u003c\/p\u003e\u003cp\u003eLike all Moeller Marine permanent tanks, the 032512 includes a swivel pick-up. Fittings are ABYC-compliant with seamless connections to rigid low-permeation hoses, and the tank is rated for a UV exposure level of 8 with an operating temperature range of -40 F to 176 F, covering both cold storage and hot engine-bay conditions. It mounts with a 035710 or 300110 tie-down bracket (sold separately).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 032512\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Below Deck Permanent Fuel Tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 12 gallons (45 liters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 24.50 in. L x 18.50 in. W x 9.75 in. H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (metric):\u003c\/strong\u003e 622 mm L x 470 mm W x 248 mm H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWithdrawal Fitting:\u003c\/strong\u003e Machined aluminum, 3\/8 inch, 360 degree swivel poplock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePick Up Type:\u003c\/strong\u003e Swivel pick-up\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Pick Up:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiesel Return:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender:\u003c\/strong\u003e Swing Arm A002074\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelly Tank:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Tie Down:\u003c\/strong\u003e 035710 or 300110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Rating:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Rating:\u003c\/strong\u003e -40 F to 176 F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Compliance:\u003c\/strong\u003e ABYC-compliant fittings with seamless connections to rigid low-perm hoses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBuilt for boats built before 2011\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the capacity of the Moeller Marine 032512 fuel tank?\u003c\/strong\u003e The 032512 holds 12 gallons (45 liters) of fuel and is designed as a below-deck permanent installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this fuel tank?\u003c\/strong\u003e The Moeller Marine 032512 measures 24.50 in. L x 18.50 in. W x 9.75 in. H (622 mm L x 470 mm W x 248 mm H).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 032512 fuel tank weigh?\u003c\/strong\u003e It weighs 13 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the tank made of?\u003c\/strong\u003e The 032512 tank body is molded plastic, with a machined aluminum 3\/8 inch withdrawal fitting for fuel pick-up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this tank fit my boat?\u003c\/strong\u003e The Moeller Marine 032512 is built for boats built before 2011; confirm your existing tank's footprint matches 24.50 in. L x 18.50 in. W x 9.75 in. H before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this tank resistant to ethanol fuel?\u003c\/strong\u003e Yes. The 032512 tank is ethanol and biodiesel corrosion and pit resistant, suited to modern blended fuels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bracket is used to mount this tank?\u003c\/strong\u003e The 032512 tank is tied down with bracket 035710 or 300110, sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 032512 include a fuel sender?\u003c\/strong\u003e The specified sender for this tank is a Swing Arm A002074 type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the temperature and UV rating of this tank?\u003c\/strong\u003e The Moeller Marine 032512 carries a UV rating of 8 and is rated for operating temperatures from -40 F to 176 F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the fittings on this tank ABYC compliant?\u003c\/strong\u003e Yes, the 032512 uses ABYC-compliant fittings with seamless connections to rigid low-permeation hoses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this tank have a diesel return line?\u003c\/strong\u003e No, the Moeller Marine 032512 does not include a diesel return fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of pick-up does this tank use?\u003c\/strong\u003e The 032512 is equipped with a swivel pick-up and a 360 degree swivel poplock withdrawal fitting for easy hose hook-up.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991085363419,"sku":"MOE-032512","price":536.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/moe-032512_1__03870.1558138187.500.750.jpg?v=1785188126"},{"product_id":"moeller-marine-032527-below-deck-permanent-fuel-tank-27-gallon-oem-770184-fits-boats-built-before-2011-36-5-x-16-x-14-5-in","title":"Moeller 27 Gallon Below Deck Aluminum Fuel Tank, OEM 770184 Equivalent, 36.50 x 16.00 x 14.50 in","description":"\u003cp\u003eThe Moeller 032527 is a 27 gallon (102 liter) below-deck permanent fuel tank built from ethanol- and biodiesel-resistant aluminum, designed to resist corrosion and pitting over the long term. It measures 36.50 inches L x 16.00 inches W x 14.50 inches H (927 mm L x 406 mm W x 368 mm H) and is intended for boats built before 2011. The tank is complete with a molded fill neck and withdrawal\/vent fittings molded directly into the shell, plus a machined aluminum 3\/8 inch withdrawal fitting with a 360 degree swivel poplock for easy hook-up. All fittings are ABYC-compliant with seamless connections to rigid low-permeation hoses, and the tank carries a UV rating of 8 with a temperature rating of -40 degrees F to 176 degrees F.\u003c\/p\u003e\u003cp\u003eTank 032527 is configured with a single fuel pick-up, includes diesel return capability, and uses a swing arm sender (A002074). It is not a belly tank. It mounts using tie-down brackets 035710 or 300110. The Moeller 032527 carries an OEM equivalent part number of 770184.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 032527\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 27 gallons (102 liters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 36.50 inches (927 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 16.00 inches (406 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 14.50 inches (368 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 19 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Pick Up:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiesel Return:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender:\u003c\/strong\u003e Swing Arm A002074\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelly Tank:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWithdrawal Fitting:\u003c\/strong\u003e Machined aluminum 3\/8 inch with 360 degree swivel poplock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Compliance:\u003c\/strong\u003e ABYC-compliant, seamless connection to rigid low-permeation hoses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Rating:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Rating:\u003c\/strong\u003e -40 degrees F to 176 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Tie-Down Brackets:\u003c\/strong\u003e 035710 or 300110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e 770184\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729325278\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for boats built before 2011\u003c\/li\u003e\n\u003cli\u003eMounts with tie-down bracket 035710 or 300110\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e770184\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat does the Moeller 032527 fuel tank fit?\u003c\/strong\u003e The Moeller 032527 is a 27 gallon below-deck permanent fuel tank designed for boats built before 2011, measuring 36.50 inches L x 16.00 inches W x 14.50 inches H.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons does this tank hold?\u003c\/strong\u003e The 032527 holds 27 gallons, equivalent to 102 liters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Moeller 032527 made from?\u003c\/strong\u003e It is made from aluminum that is ethanol- and biodiesel-corrosion and pit-resistant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent part number for this tank?\u003c\/strong\u003e Yes, the Moeller 032527 has an OEM equivalent part number of 770184.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tie-down brackets work with this fuel tank?\u003c\/strong\u003e Tank 032527 mounts using tie-down bracket 035710 or 300110.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this tank support diesel fuel?\u003c\/strong\u003e Yes, the 032527 supports diesel and includes diesel return capability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of sender comes with the tank?\u003c\/strong\u003e The 032527 uses a swing arm sender, part number A002074.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fuel pick-up points does the 032527 have?\u003c\/strong\u003e This tank has a single fuel pick-up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Moeller 032527 a belly tank?\u003c\/strong\u003e No, the 032527 is not a belly tank; it is a below-deck permanent fuel tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat withdrawal fitting does this tank use?\u003c\/strong\u003e It uses a machined aluminum 3\/8 inch withdrawal fitting with a 360 degree swivel poplock for hook-up convenience.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 032527 weigh?\u003c\/strong\u003e The 032527 weighs 19 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range is this fuel tank rated for?\u003c\/strong\u003e The 032527 carries a UV rating of 8 and a temperature rating of -40 degrees F to 176 degrees F.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991086411995,"sku":"MOE-032527","price":647.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/moe-032527__68811.1558139027.500.750.jpg?v=1785188739"},{"product_id":"moeller-marine-60-gallon-below-deck-permanent-belly-fuel-tank-with-sending-unit-mpn-032560","title":"Moeller 60 Gallon Below-Deck Permanent Fuel Tank, Model 032560","description":"\u003cp\u003eThe Moeller 032560 is a 60 gallon below-deck permanent fuel tank built for marine installations where the tank sits out of sight beneath the deck. It is constructed of plastic and comes complete with a sending unit already installed, so the fuel level can be wired directly into the boat's gauge once the tank is mounted. The tank measures 62.00 inches long by 24.50 inches wide by 13.75 inches high (1575 mm L x 622 mm W x 349 mm H) and weighs 37 pounds empty, giving installers a clear footprint to plan around before cutting or fitting a below-deck compartment.\u003c\/p\u003e\u003cp\u003eBecause it is a permanent, below-deck design, the 032560 is intended to be secured in place rather than removed for refueling trips on and off the boat. A matching bracket tie down, part number 000210-4, is available separately to properly secure the tank once it is positioned in the hull, and is worth ordering alongside the tank if a tie-down kit is not already on hand. The tank is rated for gasoline fuel systems and is sized for boats that need a larger reserve capacity than a portable tank can offer.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 032560\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 60 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 62.00 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 24.50 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 13.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetric Dimensions:\u003c\/strong\u003e 1575 mm L x 622 mm W x 349 mm H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 37 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Sending unit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Below-deck, permanent mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Tie-Down Bracket:\u003c\/strong\u003e Part No. 000210-4 (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons does the Moeller 032560 fuel tank hold?\u003c\/strong\u003e The Moeller 032560 holds 60 gallons of fuel, making it suited to boats that need a larger permanent reserve than a portable tank provides.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this fuel tank?\u003c\/strong\u003e The 032560 measures 62.00 inches long by 24.50 inches wide by 13.75 inches high (1575 mm L x 622 mm W x 349 mm H).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 60 gallon tank weigh?\u003c\/strong\u003e This tank weighs 37 pounds empty, which is the figure to use when planning the below-deck mounting structure and total loaded weight with fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the tank come with a fuel sending unit?\u003c\/strong\u003e Yes, the Moeller 032560 comes complete with a sending unit already fitted, so it can be wired to the boat's fuel gauge after installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Moeller 032560 fuel tank made from?\u003c\/strong\u003e It is made of plastic, which is used in this below-deck fuel tank for its resistance to corrosion in a marine bilge environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this tank designed for gasoline or diesel?\u003c\/strong\u003e The 032560 is rated for gasoline fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a portable or a permanent fuel tank?\u003c\/strong\u003e The 032560 is a permanent, below-deck fuel tank, meant to be fixed in place in the hull rather than removed for refueling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I secure the tank once it is installed below deck?\u003c\/strong\u003e A matching bracket tie down, part number 000210-4, is available separately to properly secure the Moeller 032560 in place; it is not included with the tank itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the tie-down bracket 000210-4 included with the tank?\u003c\/strong\u003e No, part number 000210-4 is a separate bracket tie down accessory for the Moeller 032560 and must be ordered on its own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this fuel tank intended to be installed?\u003c\/strong\u003e The Moeller 032560 is intended for below-deck installation, fitted into a hull compartment rather than mounted on an open deck surface.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991086510299,"sku":"MOE-032560","price":1023.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/moe-032560__92230.1558139365.500.750.jpg?v=1785188034"},{"product_id":"moeller-marine-70-gallon-below-deck-permanent-fuel-tank-reed-switch-sender-mpn-032570","title":"Moeller Marine 70 Gallon Diesel Fuel Tank with Fuel Return, Part 032570","description":"\u003cp\u003eThe Moeller Marine 032570 is a 70 gallon (265 liter) diesel permanent fuel tank built for below-deck installation. The tank is equipped with a fuel return line, a single fuel pickup, and a reed switch sender for accurate fuel level monitoring. It is designed to work with belly tank installations and is compatible with the Moeller 000210-4 bracket tie down system for secure mounting. Constructed of plastic, the tank offers corrosion resistance compared to metal fuel tanks, an important consideration for the marine diesel fuel environment. With overall dimensions of 50.44 inches long by 24.74 inches wide by 18.64 inches high (1281 mm x 628 mm x 473 mm), the 032570 is sized for larger vessel fuel systems that require substantial diesel capacity. This tank ships as a single unit and is intended for permanent installation in the fuel compartment of a boat. Buyers replacing or upgrading an existing below-deck diesel fuel tank, or building out a new fuel system, will find the 032570 provides the capacity, fuel return capability, and sender compatibility needed for a complete permanent fuel tank installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 032570\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 70 gallons (265 liters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Return:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 50.44 inches (1281 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 24.74 inches (628 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 18.64 inches (473 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Fuel Pickups:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender Type:\u003c\/strong\u003e Reed Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Tie Down:\u003c\/strong\u003e 000210-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelly Tank Compatible:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 36.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729012215\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons does the Moeller 032570 fuel tank hold?\u003c\/strong\u003e The Moeller 032570 holds 70 gallons, equal to 265 liters, of diesel fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this tank have a fuel return line?\u003c\/strong\u003e Yes, the Moeller 032570 diesel fuel tank includes a fuel return.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 032570 fuel tank?\u003c\/strong\u003e The Moeller 032570 measures 50.44 inches long by 24.74 inches wide by 18.64 inches high (1281 mm x 628 mm x 473 mm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of sender does the 032570 use?\u003c\/strong\u003e A reed switch sender is used on the Moeller 032570 fuel tank for fuel level monitoring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fuel pickups does this tank have?\u003c\/strong\u003e The Moeller 032570 has a single fuel pickup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Moeller 032570 fuel tank made of?\u003c\/strong\u003e This fuel tank is made of plastic, which resists corrosion in a marine diesel fuel environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this tank compatible with a belly tank installation?\u003c\/strong\u003e Yes, the Moeller 032570 is compatible with belly tank installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bracket is used to secure the 032570 fuel tank?\u003c\/strong\u003e The Moeller 032570 uses the 000210-4 bracket tie down for mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 032570 fuel tank weigh?\u003c\/strong\u003e The Moeller 032570 weighs 36.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 032570 tank designed for gasoline or diesel fuel?\u003c\/strong\u003e The 032570 is a diesel fuel tank, built with a fuel return for diesel fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Moeller 032570 intended for permanent installation?\u003c\/strong\u003e Yes, the 032570 is a permanent fuel tank designed for below-deck installation in a boat's fuel compartment.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991086543067,"sku":"MOE-032570","price":780.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/moe-032570__94301.1677705990.500.750.jpg?v=1785188126"},{"product_id":"moeller-marine-032529-29-gallon-below-deck-aluminum-permanent-fuel-tank-43-x-25-75-x-13-15-in","title":"Moeller 29 Gallon Below Deck Permanent Aluminum Fuel Tank, Part 032529, 43 in. L x 25.75 in. W x 13.15 in. H","description":"\u003cp\u003eThe Moeller 032529 is a 29 gallon (110 liter) below deck permanent fuel tank built from aluminum for long-term marine service. It is designed to install below the deck of a boat as the vessel's primary fuel supply, with a molded fill neck and withdrawal and vent fittings molded directly into the shell for a clean, low-profile fit in the hull.\u003c\/p\u003e\u003cp\u003eThe tank includes a machined aluminum 3\/8 in. Withdrawal fitting with a 360 degree swivel poplock for easy hook-up, along with ABYC-compliant fittings that connect seamlessly to rigid low-permeation fuel hoses. The aluminum construction is treated to resist corrosion and pitting from ethanol and biodiesel fuel blends, helping the tank hold up over years of exposure to modern fuel formulations. It ships with a swing arm sender (A002074) and is configured as a belly tank with a single fuel pick-up and no diesel return line.\u003c\/p\u003e\u003cp\u003eOverall dimensions are 43.00 in. L x 25.75 in. W x 13.15 in. H (1092 mm L x 654 mm W x 334 mm H), and the tank uses a Bracket Tie Down 000210-4 for secure below-deck mounting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 032529\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Below Deck Permanent Fuel Tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 29 gallons (110 liters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 43.00 in. L x 25.75 in. W x 13.15 in. H (1092 mm L x 654 mm W x 334 mm H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 30 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Tie Down:\u003c\/strong\u003e 000210-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Pick Up:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiesel Return:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender:\u003c\/strong\u003e Swing Arm A002074\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelly Tank:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWithdrawal Fitting:\u003c\/strong\u003e Machined aluminum 3\/8 in. With 360 degree swivel poplock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings:\u003c\/strong\u003e ABYC-compliant, seamless connection to rigid low-permeation hoses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Resistance:\u003c\/strong\u003e Ethanol and biodiesel corrosion and pit resistant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the capacity of the Moeller 032529 fuel tank?\u003c\/strong\u003e The Moeller 032529 holds 29 gallons (110 liters) of fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this fuel tank?\u003c\/strong\u003e Part 032529 measures 43.00 in. L x 25.75 in. W x 13.15 in. H (1092 mm L x 654 mm W x 334 mm H).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Moeller 032529 tank made from?\u003c\/strong\u003e It is made from aluminum, treated to resist corrosion and pitting from ethanol and biodiesel fuel blends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fuel tank weigh?\u003c\/strong\u003e The Moeller 032529 fuel tank weighs 30 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this tank include a fuel sender?\u003c\/strong\u003e Yes, the 032529 ships configured with a swing arm sender, A002074.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the tank have a diesel return line?\u003c\/strong\u003e No, the Moeller 032529 does not include a diesel return line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fuel pick-ups does this tank have?\u003c\/strong\u003e The 032529 is configured with a single fuel pick-up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bracket is used to mount this tank?\u003c\/strong\u003e Installation uses Bracket Tie Down 000210-4, which secures the 032529 below deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of withdrawal fitting does the tank use?\u003c\/strong\u003e It uses a machined aluminum 3\/8 in. Withdrawal fitting with a 360 degree swivel poplock for convenient hose hook-up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a belly tank design?\u003c\/strong\u003e Yes, the Moeller 032529 is configured as a belly tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the fittings compliant with marine standards?\u003c\/strong\u003e The fittings on the 032529 are ABYC-compliant and connect seamlessly to rigid low-permeation fuel hoses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this fuel tank meant to be installed?\u003c\/strong\u003e The Moeller 032529 is designed as a below deck permanent fuel tank, installed beneath the deck as the boat's primary fuel supply.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991086575835,"sku":"MOE-032529","price":642.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/moe-032529__58697.1558173714.500.750.jpg?v=1785188932"},{"product_id":"moeller-marine-52-gallon-below-deck-boat-fuel-tank-with-sending-unit-mpn-032552","title":"Moeller Marine 52 Gallon Below-Deck Boat Fuel Tank with Sending Unit - Part 032552","description":"\u003cp\u003eThe Moeller 032552 is a 52 gallon (193 liter) below-deck permanent fuel tank built for installation beneath the deck of a boat. It uses a belly style design and comes complete with a sending unit, so the tank is ready to be plumbed into the fuel system and wired to the fuel gauge once installed. The tank measures 60.00 inches long by 24.00 inches wide by 12.00 inches high (1524 mm x 610 mm x 305 mm) and is built from plastic with a powder-coated exterior finish.\u003c\/p\u003e\u003cp\u003eInstallation is designed around a tie-down bracket kit, specifically bracket style 300110, which secures the tank in place below deck. The tank is rated for both diesel and gasoline fuel, making it suitable for a range of inboard and stern drive fuel systems. At 36 pounds, it is a permanent-mount tank intended for a fixed belly installation rather than a portable application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 032552\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 52 gallons (193 liters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 60.00 inches (1524 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 24.00 inches (610 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 12.00 inches (305 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 36 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Powder-coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Diesel, Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Style:\u003c\/strong\u003e Belly style, below-deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Tie-Down Bracket:\u003c\/strong\u003e 300110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Sending unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Vehicle specific\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729325520\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis tank is a below-deck belly style fuel tank intended for vehicle-specific installation; no specific engine or boat model fitment is listed.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons does the Moeller 032552 fuel tank hold?\u003c\/strong\u003e The Moeller 032552 holds 52 gallons, equal to 193 liters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this fuel tank?\u003c\/strong\u003e The Moeller 032552 measures 60.00 inches long by 24.00 inches wide by 12.00 inches high (1524 mm x 610 mm x 305 mm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the tank come with a sending unit?\u003c\/strong\u003e Yes, the Moeller 032552 fuel tank ships complete with a sending unit installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the tank made from?\u003c\/strong\u003e This tank is constructed from plastic with a powder-coated exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this tank run on diesel or gasoline?\u003c\/strong\u003e The Moeller 032552 is rated for both diesel and gasoline fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the tank weigh?\u003c\/strong\u003e The Moeller 032552 weighs 36 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting hardware is needed to install this tank?\u003c\/strong\u003e This tank is designed to be secured using tie-down bracket style 300110.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an above-deck or below-deck tank?\u003c\/strong\u003e The Moeller 032552 is a below-deck, belly style permanent fuel tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this tank a permanent or portable installation?\u003c\/strong\u003e It is a permanent-mount tank intended for fixed belly installation below deck, not a portable fuel container.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there OEM cross-reference numbers for this tank?\u003c\/strong\u003e No OEM cross-reference or replacement numbers are listed for the Moeller 032552.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this tank fit any boat?\u003c\/strong\u003e The Moeller 032552 has a vehicle-specific fit type; no universal or one-size-fits-all fitment is claimed for this tank.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991086608603,"sku":"MOE-032552","price":761.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/moe-032552__18199.1558174028.500.750.jpg?v=1785188053"},{"product_id":"moeller-032537-below-deck-permanent-diesel-fuel-tank-35-gallon-26-x-20-5-x-18-78-in-fits-boats-built-before-2011","title":"Moeller 35 Gallon Aluminum Permanent Below-Deck Diesel Fuel Tank, Part 032537, 26.00 In. L x 20.50 In. W x 18.78 In. H","description":"\u003cp\u003eThe Moeller 032537 is a 35 gallon permanent fuel tank built for below-deck installation in diesel-powered boats. Constructed from aluminum, the tank resists corrosion and pitting from ethanol and biodiesel exposure, making it a durable long-term fuel storage solution. The shell is molded with the fill neck and withdrawal\/vent fittings built directly in, and it uses ABYC-compliant fittings with seamless connections to rigid low-permeation hoses for a secure, code-compliant fuel system installation.\u003c\/p\u003e\u003cp\u003eA machined aluminum 3\/8 inch withdrawal fitting with a 360 degree swivel poplock allows convenient hook-up regardless of hose routing angle. The tank is rated for a single fuel pickup, has no diesel return, and is not a belly tank configuration. It is fitted with a swing arm sender (A002074) for fuel level monitoring and mounts using bracket tie downs 035710 or 300110. The aluminum construction carries a UV rating of 8 and a temperature rating of -40 F to 176 F, allowing it to hold up to sustained sun and temperature exposure in a marine environment.\u003c\/p\u003e\u003cp\u003eMeasuring 26.00 in. L x 20.50 in. W x 18.78 in. H (660 mm x 521 mm x 477 mm), the Moeller 032537 is sized for below-deck installation in boats built before 2011.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 032537\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Permanent Fuel Tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 35 gallons (133 liters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 26.00 inches (660 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 20.50 inches (521 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 18.78 inches (477 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Pickups:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiesel Return:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender:\u003c\/strong\u003e Swing Arm A002074\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Tie Down:\u003c\/strong\u003e 035710 or 300110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelly Tank:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWithdrawal Fitting:\u003c\/strong\u003e Machined aluminum 3\/8 inch with 360 degree swivel poplock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Rating:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Rating:\u003c\/strong\u003e -40 F to 176 F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729003206\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eSized for below-deck installation in boats built before 2011.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Moeller 032537 fuel tank?\u003c\/strong\u003e The Moeller 032537 measures 26.00 in. L x 20.50 in. W x 18.78 in. H (660 mm x 521 mm x 477 mm) and holds 35 gallons (133 liters) of diesel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this tank compatible with gasoline engines?\u003c\/strong\u003e The Moeller 032537 is a diesel fuel tank with no diesel return; it is built for diesel fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the tank made of?\u003c\/strong\u003e Aluminum. The Moeller 032537 shell is molded aluminum, chosen for resistance to corrosion and pitting from ethanol and biodiesel exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fuel pickups does the 032537 have?\u003c\/strong\u003e One. The Moeller 032537 is configured with a single fuel pickup and no diesel return line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat sender does the tank use?\u003c\/strong\u003e The Moeller 032537 is equipped with a swing arm sender, model A002074, for fuel level monitoring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bracket tie downs fit this tank?\u003c\/strong\u003e The Moeller 032537 mounts with bracket tie down 035710 or 300110.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Moeller 032537 a belly tank?\u003c\/strong\u003e No. The Moeller 032537 is a standard below-deck permanent fuel tank, not a belly tank configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the withdrawal fitting work?\u003c\/strong\u003e The Moeller 032537 uses a machined aluminum 3\/8 inch withdrawal fitting with a 360 degree swivel poplock, allowing hose hook-up from any angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can the tank withstand?\u003c\/strong\u003e The Moeller 032537 carries a temperature rating of -40 F to 176 F and a UV rating of 8 for sustained outdoor and marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the fittings ABYC compliant?\u003c\/strong\u003e Yes, the Moeller 032537 uses ABYC-compliant fittings with seamless connections to rigid low-permeation hoses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the tank weigh?\u003c\/strong\u003e The Moeller 032537 weighs 25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the 032537 sized for?\u003c\/strong\u003e The Moeller 032537 is sized for below-deck installation in boats built before 2011.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991086706907,"sku":"MOE-032537","price":731.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/moe-032537_lg__79878.1558173867.500.750.jpg?v=1785189171"},{"product_id":"moeller-marine-80-gallon-below-deck-diesel-fuel-tank-with-belly-tank-and-reed-sender-mpn-032580","title":"Moeller Marine 80 Gallon Diesel Fuel Tank, Belly Tank Style with Reed Style Sender (032580)","description":"\u003cp\u003eThe Moeller Marine 80 Gallon Diesel Fuel Tank (part number 032580) is a below-deck permanent fuel tank built in belly tank style to fit low, wide spaces in a boat's hull. It holds 80 gallons (303 liters) of diesel fuel and includes a diesel return line. The tank measures 66.93 in. L x 26.77 in. W x 14.60 in. H (1700 mm L x 680 mm W x 371 mm H) and is constructed of plastic. It is equipped with two fuel pickups and a reed style sender for fuel level monitoring. The tank is manufactured in the United States and is intended to be properly secured in the hull using a tie-down bracket; it is compatible with bracket tie down hardware 300410 or 000210-4 (145 in.), or 395059-145S. This tank suits boat owners replacing or upgrading a below-deck diesel fuel system where an 80 gallon capacity and belly tank profile are required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 032580\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Permanent Fuel Tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 80 gallons (303 liters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiesel Return:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 66.93 in. L x 26.77 in. W x 14.60 in. H (1700 mm L x 680 mm W x 371 mm H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Fuel Pickups:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender Type:\u003c\/strong\u003e Reed Style\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelly Tank Style:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 46 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Bracket Tie Down:\u003c\/strong\u003e 300410 or 000210-4 (145 in.), or 395059-145S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729012239\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the capacity of the Moeller 032580 fuel tank?\u003c\/strong\u003e The Moeller 032580 diesel fuel tank holds 80 gallons, equivalent to 303 liters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this fuel tank?\u003c\/strong\u003e Part number 032580 measures 66.93 in. L x 26.77 in. W x 14.60 in. H, which is 1700 mm L x 680 mm W x 371 mm H.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Moeller 032580 fuel tank made of?\u003c\/strong\u003e This tank is made of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this tank work with diesel fuel?\u003c\/strong\u003e Yes, the Moeller 032580 is a diesel fuel tank and includes a diesel return line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 032580 fuel tank weigh?\u003c\/strong\u003e The tank weighs 46 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fuel pickups does this tank have?\u003c\/strong\u003e The Moeller 032580 tank is equipped with 2 fuel pickups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of fuel sender comes with this tank?\u003c\/strong\u003e It comes with a reed style sender for fuel level monitoring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a belly tank style fuel tank?\u003c\/strong\u003e The Moeller 032580 is built in belly tank style, meaning its low, wide profile is designed to fit within the hull cavity below deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bracket tie down hardware works with this tank?\u003c\/strong\u003e The Moeller 032580 tank is compatible with bracket tie down hardware 300410 or 000210-4 (145 in.), or part number 395059-145S.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Moeller 032580 fuel tank manufactured?\u003c\/strong\u003e It is manufactured in the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Moeller product?\u003c\/strong\u003e Yes, part number 032580 is a genuine Moeller Marine fuel tank, not an aftermarket reproduction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the Moeller 032580?\u003c\/strong\u003e The order includes the 80 gallon diesel fuel tank itself; the bracket tie down hardware is a separate compatible item.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991086739675,"sku":"MOE-032580","price":1120.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/moe-032580_lg__35267.1677705976.500.750.jpg?v=1785188333"},{"product_id":"moeller-marine-032585-85-gallon-below-deck-permanent-marine-fuel-tank-with-swing-arm-sending-unit","title":"Moeller Marine 85 Gallon Permanent Fuel Tank, Part 032585","description":"\u003cp\u003eThe Moeller Marine 85 gallon permanent fuel tank, part number 032585, is a below-deck belly tank built to fit low-profile installations where headroom is limited. With a capacity of 85 gallons (322 liters), it is designed for boats that need extended fuel range without raising the deck line. The tank measures 53.63 inches L x 34.75 inches W x 16.50 inches H (1362 mm L x 883 mm W x 419 mm H) and weighs 46.9 pounds.\u003c\/p\u003e\u003cp\u003eThe tank is constructed of plastic and comes complete with a sending unit, so it is ready to install with fuel level monitoring in place. It is fitted with a single fuel pickup and includes a built-in diesel return port. A custom 11.5 inch bracket tie down (part 395059-115S) and a sender swing arm (part A002074) are available to properly secure the tank and support the sending unit during installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 032585\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 85 gallons (322 liters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 46.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 53.63 inches L x 34.75 inches W x 16.50 inches H (1362 mm L x 883 mm W x 419 mm H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelly Tank:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiesel Return:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Fuel Pickups:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Tie Down:\u003c\/strong\u003e Custom, 11.5 inches (Part 395059-115S)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender Swing Arm:\u003c\/strong\u003e A002074\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729012246\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons does the Moeller 032585 fuel tank hold?\u003c\/strong\u003e The Moeller 032585 fuel tank holds 85 gallons, equal to 322 liters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 032585 fuel tank?\u003c\/strong\u003e The tank measures 53.63 inches long by 34.75 inches wide by 16.50 inches high (1362 mm x 883 mm x 419 mm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fuel tank weigh?\u003c\/strong\u003e The Moeller 85 gallon fuel tank, part 032585, weighs 46.9 pounds empty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a belly tank and is the 032585 one?\u003c\/strong\u003e Yes, the 032585 is designated a belly tank, meaning it is a low-profile design built to sit below the deck where vertical clearance is limited.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this tank support a diesel return line?\u003c\/strong\u003e Yes, the Moeller 032585 tank includes a diesel return port for engines that route fuel back to the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fuel pickups does the tank have?\u003c\/strong\u003e The 032585 fuel tank is equipped with a single fuel pickup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the tank made of?\u003c\/strong\u003e The 032585 fuel tank is made of plastic construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the tank come with a sending unit?\u003c\/strong\u003e Yes, the Moeller 85 gallon fuel tank comes complete with a sending unit installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bracket is used to secure this fuel tank?\u003c\/strong\u003e A custom 11.5 inch bracket tie down, part number 395059-115S, is available to secure the 032585 tank in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the sender swing arm part number for this tank?\u003c\/strong\u003e The sender swing arm for the Moeller 032585 fuel tank is part number A002074.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a gasoline fuel tank?\u003c\/strong\u003e Yes, the Moeller 032585 tank is intended for gasoline fuel.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991086936283,"sku":"MOE-032585","price":1214.73,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/moe-032585__16155.1558174335.500.750.jpg?v=1785188672"},{"product_id":"moeller-marine-032640-below-deck-permanent-diesel-fuel-tank-40-gallon-26-x-20-5-x-21-25-in-for-boats-built-before-2011","title":"Moeller Marine 032640 Aluminum 40 Gallon Diesel Fuel Tank, 26 in. L x 20.5 in. W x 21.25 in. H","description":"\u003cp\u003eThe Moeller Marine 032640 is a permanent, below-deck aluminum fuel tank built for diesel-powered boats, sized to hold 40 gallons and measuring 26.00 in. L x 20.50 in. W x 21.25 in. H (660 mm L x 521 mm W x 540 mm H). It is configured for diesel return applications and is fitted with a single fuel pickup and an ESU Universal Diesel Return sender (6-24 in.), so it is ready for installations that require fuel to be routed back to the tank rather than a non-return setup.\u003c\/p\u003e\u003cp\u003eThe tank shell is machined aluminum, chosen for its resistance to corrosion and pitting from ethanol and biodiesel exposure, and it carries a UV rating of 8 with a temperature rating of -40 F to 176 F for durability in a marine engine compartment. The fill neck and withdrawal\/vent fittings are molded directly into the shell rather than bolted on, reducing potential leak points, and the tank uses ABYC-compliant fittings with seamless connections to rigid low-permeation hoses. A machined aluminum 3\/8 in. Withdrawal fitting with a 360-degree swivel poplock is included for convenient hose hook-up during installation.\u003c\/p\u003e\u003cp\u003eThis is not a belly tank configuration. Mounting requires a bracket tie down, and the 032640 is designed to work with tie-down bracket part number 035710 or 300110.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 032640\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 40 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 26.00 in. L x 20.50 in. W x 21.25 in. H (660 mm L x 521 mm W x 540 mm H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22.55 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Fuel Pickups:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiesel Return:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender:\u003c\/strong\u003e ESU Universal Diesel Return, 6-24 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Tie Down:\u003c\/strong\u003e 035710 or 300110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelly Tank:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWithdrawal Fitting:\u003c\/strong\u003e 3\/8 in. Machined aluminum, 360-degree swivel poplock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Rating:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Rating:\u003c\/strong\u003e -40 F to 176 F\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eBelow-deck permanent installation for diesel fuel systems; requires bracket tie down 035710 or 300110 (sold separately) for mounting.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the capacity of the Moeller 032640 fuel tank?\u003c\/strong\u003e The Moeller Marine 032640 holds 40 gallons and is configured for diesel fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the exact dimensions of this tank?\u003c\/strong\u003e The 032640 measures 26.00 in. L x 20.50 in. W x 21.25 in. H (660 mm L x 521 mm W x 540 mm H).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this tank designed for diesel or gasoline?\u003c\/strong\u003e Yes, the 032640 is built for diesel fuel and includes a diesel return sender, so it is not intended for a non-return gasoline setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 032640 weigh?\u003c\/strong\u003e This tank weighs 22.55 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the tank made from?\u003c\/strong\u003e The 032640 is made from machined aluminum, which resists corrosion and pitting from ethanol and biodiesel exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fuel pickups does this tank have?\u003c\/strong\u003e The 032640 has a single fuel pickup, along with an ESU Universal Diesel Return sender (6-24 in.).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bracket do I need to mount this tank?\u003c\/strong\u003e Mounting the 032640 requires a bracket tie down, using either part number 035710 or 300110, which is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Moeller 032640 a belly tank?\u003c\/strong\u003e No, the 032640 is a standard below-deck permanent fuel tank, not a belly tank configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the withdrawal fitting?\u003c\/strong\u003e A 3\/8 in. Machined aluminum withdrawal fitting with a 360-degree swivel poplock is built into the 032640 for hose hook-up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can this tank handle?\u003c\/strong\u003e The 032640 carries a temperature rating of -40 F to 176 F, along with a UV rating of 8 for sun exposure durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the fittings on this tank ABYC-compliant?\u003c\/strong\u003e Yes, the 032640 uses ABYC-compliant fittings with seamless connections to rigid low-permeation hoses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the tank include the fill neck and vent fittings?\u003c\/strong\u003e Yes, the fill neck and withdrawal\/vent fittings are molded directly into the shell of the 032640 rather than added as separate components.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991087329499,"sku":"MOE-032640","price":741.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/moe-032640__37818.1558174753.500.750.jpg?v=1785188746"},{"product_id":"moeller-19-gallon-below-deck-permanent-marine-fuel-tank-032719-47-x-10-25-x-12-94-in-tie-down-300110","title":"Moeller Marine 032719 Below Deck Permanent Fuel Tank, 19 Gallon, for Boats Built Before 2011","description":"\u003cp\u003eThe Moeller Marine 032719 is a 19 gallon below deck permanent fuel tank built for boats built before 2011. It is molded from ethanol and biodiesel corrosion- and pit-resistant plastic, with the fill neck and withdrawal\/vent fittings molded directly into the shell for a seamless, leak-resistant construction. The tank uses a machined aluminum 3\/8 inch withdrawal fitting with a 360 degree swivel poplock for easy hook-up, and its fittings are ABYC-compliant with seamless connections to rigid low-permeation hoses to minimize fuel vapor loss.\u003c\/p\u003e\u003cp\u003eThis tank is configured with one fuel pick-up, no diesel return, and a swing arm sender (A002074). It is not a belly tank. It mounts using a 300110 tie-down bracket and measures 47.00 in. L x 10.25 in. W x 12.94 in. H (1194 mm L x 260 mm W x 329 mm H). It carries a UV rating of 8 and is rated for operating temperatures from -40 F to 176 F, making it suitable for long-term below-deck installation in a range of climates.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 032719\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 19 gallons (72 liters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 47.00 inches (1194 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 10.25 inches (260 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 12.94 inches (329 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWithdrawal Fitting:\u003c\/strong\u003e Machined aluminum, 3\/8 inch, 360 degree swivel poplock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Pick Up:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiesel Return:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender:\u003c\/strong\u003e Swing arm A002074\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelly Tank:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Tie Down:\u003c\/strong\u003e 300110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Rating:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Rating:\u003c\/strong\u003e -40 F to 176 F\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFor boats built before 2011\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fuel capacity of the Moeller 032719 fuel tank?\u003c\/strong\u003e The Moeller 032719 holds 19 gallons (72 liters) of fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Moeller 032719 fuel tank?\u003c\/strong\u003e This tank measures 47.00 in. L x 10.25 in. W x 12.94 in. H (1194 mm L x 260 mm W x 329 mm H).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 032719 tank support diesel fuel?\u003c\/strong\u003e The Moeller 032719 has no diesel return configured, so it is set up as a single fuel pick-up tank rather than a diesel-return configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the Moeller 032719 designed to fit?\u003c\/strong\u003e This tank is designed for boats built before 2011.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 032719 fuel tank weigh?\u003c\/strong\u003e The 032719 weighs 16.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Moeller 032719 tank made from?\u003c\/strong\u003e It is molded from plastic that is corrosion- and pit-resistant against ethanol and biodiesel blends, with the fill neck and withdrawal\/vent fittings molded directly into the shell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of sender does the 032719 use?\u003c\/strong\u003e The Moeller 032719 is equipped with a swing arm sender, part number A002074.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat withdrawal fitting comes with this tank?\u003c\/strong\u003e A machined aluminum 3\/8 inch withdrawal fitting with a 360 degree swivel poplock is included on the 032719 for convenient hook-up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Moeller 032719 a belly tank?\u003c\/strong\u003e No, the 032719 is a below deck permanent fuel tank, not a belly tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bracket is needed to mount the 032719 tank?\u003c\/strong\u003e The Moeller 032719 mounts with a 300110 tie-down bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can the 032719 tank handle?\u003c\/strong\u003e The tank is rated for operating temperatures from -40 F to 176 F and carries a UV rating of 8 for sustained outdoor exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the fittings on the 032719 ABYC-compliant?\u003c\/strong\u003e Yes, the Moeller 032719 uses ABYC-compliant fittings with seamless connections to rigid low-permeation hoses to reduce fuel vapor loss.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991087427803,"sku":"MOE-032719","price":597.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/moe-032719__97990.1558139161.500.750.jpg?v=1785188878"},{"product_id":"moeller-032819-below-deck-permanent-bow-fuel-tank-19-gallon-72l-32-x-20-75-x-12-31-in-for-boats-built-before-2011","title":"Moeller Marine 19 Gallon Below Deck Fuel Tank, Part 032819, for Boats Built Before 2011","description":"\u003cp\u003eThe Moeller Marine 032819 is a 19 gallon (72 liter) below-deck permanent fuel tank built for boats built before 2011. It is molded from plastic with an aluminum exterior finish, giving it corrosion and pit resistance against today's ethanol- and biodiesel-blended fuels. The fill neck and withdrawal\/vent fittings are molded directly into the shell rather than bolted on, reducing potential leak points, and the fittings are ABYC-compliant with seamless connections to rigid low-permeation hose.\u003c\/p\u003e\u003cp\u003eFuel withdrawal is handled through a machined aluminum 3\/8 in. Fitting with a 360 degree swivel poplock for easy hook-up, and the tank uses a swing arm sender (A002074) rather than a belly tank configuration. It is rated for gasoline and diesel service, carries a UV rating of 8, and is rated to operate from -40 degrees F to 176 degrees F. Overall dimensions are 32.00 in. L x 20.75 in. W x 12.31 in. H (813 mm L x 527 mm W x 313 mm H), and it uses tie-down bracket 035710 for secure below-deck mounting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 032819\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Below Deck Permanent Fuel Tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 19 gallons (72 liters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 32.00 in. L x 20.75 in. W x 12.31 in. H (813 mm L x 527 mm W x 313 mm H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Tie Down:\u003c\/strong\u003e 035710\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Pick Up:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiesel Return:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelly Tank:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender:\u003c\/strong\u003e Swing Arm A002074\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWithdrawal Fitting:\u003c\/strong\u003e Machined aluminum 3\/8 in. With 360 degree swivel poplock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Diesel, Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Rating:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Rating:\u003c\/strong\u003e -40 degrees F to 176 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe Moeller 032819 is designed for boats built before 2011 and mounts using tie-down bracket 035710.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the capacity of the Moeller 032819 fuel tank?\u003c\/strong\u003e The Moeller 032819 holds 19 gallons (72 liters) of fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is this tank designed to fit?\u003c\/strong\u003e The Moeller 032819 is designed for boats built before 2011.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 032819 fuel tank?\u003c\/strong\u003e It measures 32.00 in. L x 20.75 in. W x 12.31 in. H (813 mm L x 527 mm W x 313 mm H).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 032819 weigh?\u003c\/strong\u003e The tank weighs 16 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the tank made of?\u003c\/strong\u003e The Moeller 032819 is molded from plastic with an aluminum exterior finish, formulated to resist corrosion and pitting from ethanol and biodiesel fuel blends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this tank be used with diesel fuel?\u003c\/strong\u003e Yes, the Moeller 032819 is rated for both gasoline and diesel fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 032819 tank support a diesel return line?\u003c\/strong\u003e No, the Moeller 032819 does not have a diesel return fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of fuel sender does this tank use?\u003c\/strong\u003e It uses a swing arm sender, part number A002074, rather than a belly tank configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tie-down bracket is needed for the 032819 tank?\u003c\/strong\u003e The Moeller 032819 mounts using tie-down bracket 035710.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fuel withdrawal fitting like on this tank?\u003c\/strong\u003e A machined aluminum 3\/8 in. Withdrawal fitting with a 360 degree swivel poplock is used for hook-up convenience on the 032819 tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range is the tank rated for?\u003c\/strong\u003e The Moeller 032819 is rated to operate from -40 degrees F to 176 degrees F, with a UV rating of 8.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the tank fittings compliant with marine standards?\u003c\/strong\u003e Yes, the fittings on the Moeller 032819 are ABYC-compliant with seamless connections to rigid low-permeation hose.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991087526107,"sku":"MOE-032819","price":678.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/moe-032819__10312.1558173482.500.750.jpg?v=1785188960"},{"product_id":"moeller-035722-10-marine-fuel-tank-sending-unit-6-12-in-tank-depth-33-240-ohm-sae-5-hole","title":"Moeller Fuel Tank Sending Unit, 6-12 Inch Tank Depth, 33-240 Ohm, Part 035722-10","description":"\u003cp\u003eThe Moeller 035722-10 is a fuel tank sending unit built for tanks with a 6 to 12 inch (152 to 305 mm) depth, using a one swing arm design to track fuel level as it changes. It is calibrated to the industry-standard resistance range of 33 to 240 ohms, so it works with a standard dash-mounted fuel gauge (gauge sold separately) without any recalibration on the boat owner's part. The sender bolts to the tank using a SAE 5-hole mounting pattern, and it ships complete with a 5-hole gasket and screws so installation does not require sourcing separate hardware; the gasket and screws are also available separately if replacement is ever needed. Internal components are built from plastic, which resists rust and corrosion in the fuel tank environment better than bare metal contacts, helping the sender hold accurate readings over time. This sending unit is part of a Moeller lineup covering multiple tank depths, and the 035722-10 specifically covers the 6 to 12 inch depth range with a single swing arm; deeper tanks use a different part number in the same series. It mounts directly in place of a compatible sending unit on tanks matching this depth and hole pattern, and pairs with any 33-240 ohm dash gauge for a complete fuel level reading system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035722-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Tank Sending Unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Depth:\u003c\/strong\u003e 6 to 12 inches (152 to 305 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing Arm Configuration:\u003c\/strong\u003e One swing arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance Range:\u003c\/strong\u003e 33 to 240 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Pattern:\u003c\/strong\u003e SAE 5-hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e 5-hole gasket and screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge Compatibility:\u003c\/strong\u003e Compatible with dash-mounted gauge (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729722107\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits fuel tanks with a 6 to 12 inch (152 to 305 mm) depth using a SAE 5-hole mounting pattern. Pairs with any 33-240 ohm dash-mounted fuel gauge.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat tank depth does the Moeller 035722-10 sending unit fit?\u003c\/strong\u003e The Moeller 035722-10 is calibrated for fuel tanks with a 6 to 12 inch (152 to 305 mm) depth, using a one swing arm design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this sending unit include a gauge?\u003c\/strong\u003e No, the Moeller 035722-10 is the sending unit only; it is compatible with a dash-mounted fuel gauge, which is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat resistance range is the 035722-10 calibrated to?\u003c\/strong\u003e It is calibrated to 33 to 240 ohms, the industry-standard resistance range used by standard dash-mounted fuel gauges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the Moeller 035722-10?\u003c\/strong\u003e The 035722-10 sending unit ships complete with a 5-hole gasket and mounting screws for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting pattern does the 035722-10 use?\u003c\/strong\u003e This sending unit uses a SAE 5-hole mounting pattern to bolt to the fuel tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy a replacement gasket for the 035722-10 separately?\u003c\/strong\u003e Yes, the 5-hole gasket and screws used with the Moeller 035722-10 are also sold separately from the sending unit itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Moeller 035722-10 made of?\u003c\/strong\u003e It is made of plastic, which resists rust and corrosion in the fuel tank environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 035722-10 weigh?\u003c\/strong\u003e The Moeller 035722-10 sending unit weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many swing arms does the 035722-10 have?\u003c\/strong\u003e One swing arm, which tracks fuel level across the unit's 6 to 12 inch rated tank depth range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 035722-10 the right part for a deeper fuel tank?\u003c\/strong\u003e No, the 035722-10 is rated for 6 to 12 inch tank depths only; Moeller sends other part numbers in the same series for deeper tanks, so measure tank depth before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Moeller 035722-10?\u003c\/strong\u003e The UPC for the Moeller 035722-10 fuel tank sending unit is 739729722107.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991090082011,"sku":"MOE-035722-10","price":41.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61fMNPyB0VL.jpg?v=1784491250"},{"product_id":"moeller-035723-fuel-tank-installation-kit-deck-fill-fuel-fill-hose-vent-hose-clamps-and-brass-barb","title":"Moeller Fuel Tank Installation Kit, Part 035723, for Fuel Systems Produced Prior to 2011","description":"\u003cp\u003eThe Moeller Fuel Tank Installation Kit, part number 035723, provides the hardware needed to install a permanent fuel tank in a boat with a fuel system produced prior to 2011. The kit centers on a deck fill and matching gasket, which provides the sealed access point where fuel is added to the tank from the deck. To complete the fuel-fill and venting connections, the kit includes one 12 in. Fuel fill hose along with 25 in. (63 cm) of 5\/8 in. Vent hose and a 5\/8 in. Brass hose barb for the vent line fitting.\u003c\/p\u003e\u003cp\u003eHose connections are secured with stainless steel hose clamps in two sizes: (2) 1-1\/8 in. Clamps and (4) 2-1\/4 in. Clamps, giving installers the range of clamp sizes needed for the fill and vent hose diameters used in this kit. Two mounting strips (part number 035731-10) are also included for securing the installation. Because the kit is built for fuel systems produced prior to 2011, it is intended as a replacement or new-install solution for older permanent fuel tank setups rather than current-production fuel systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035723\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Permanent Fuel Tank Installation Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e For fuel systems produced prior to 2011\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Fill:\u003c\/strong\u003e Y deck fill and gasket included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Clamps:\u003c\/strong\u003e (2) 1-1\/8 in. And (4) 2-1\/4 in. Stainless steel hose clamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Fill Hose:\u003c\/strong\u003e One 12 in. Fuel fill hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVent Hose:\u003c\/strong\u003e 25 in. (63 cm) of 5\/8 in. Vent hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Barb:\u003c\/strong\u003e 5\/8 in. Brass hose barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Strips:\u003c\/strong\u003e (2) mounting strips, part number 035731-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729357231\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for fuel systems produced prior to 2011.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this kit.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Moeller 035723 Fuel Tank Installation Kit?\u003c\/strong\u003e The kit includes a Y deck fill and gasket, (2) 1-1\/8 in. And (4) 2-1\/4 in. Stainless steel hose clamps, one 12 in. Fuel fill hose, 25 in. (63 cm) of 5\/8 in. Vent hose, a 5\/8 in. Brass hose barb, and (2) mounting strips (part number 035731-10).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Moeller 035723 kit fit a fuel system built after 2011?\u003c\/strong\u003e No. This kit is designed for fuel systems produced prior to 2011, so it is intended for older permanent fuel tank installations rather than current-production fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat sizes are the hose clamps in kit 035723?\u003c\/strong\u003e Two sizes are included: (2) 1-1\/8 in. Stainless steel hose clamps and (4) 2-1\/4 in. Stainless steel hose clamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the fuel fill hose included with this kit?\u003c\/strong\u003e One 12 in. Fuel fill hose is included in the Moeller 035723 installation kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length and diameter is the vent hose?\u003c\/strong\u003e The kit includes 25 in. (63 cm) of 5\/8 in. Vent hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the hose barb in this kit made of brass or plastic?\u003c\/strong\u003e The 035723 kit includes a 5\/8 in. Brass hose barb for the vent hose connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Moeller fuel tank installation kit include mounting hardware?\u003c\/strong\u003e Yes, (2) mounting strips, part number 035731-10, are included in the 035723 kit for securing the installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 035723 kit weigh?\u003c\/strong\u003e The Moeller Fuel Tank Installation Kit weighs 3.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit come with a deck fill?\u003c\/strong\u003e Yes, a Y deck fill and matching gasket are included as part of the 035723 installation kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part number 035723 a genuine Moeller part?\u003c\/strong\u003e Yes, 035723 is Moeller's own manufacturer part number for this Fuel Tank Installation Kit.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991090213083,"sku":"MOE-035723","price":109.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MOE-035723_lg__70693.1558116252.500.750.jpg?v=1785188242"},{"product_id":"moeller-035728-10-universal-5-hole-gasket-for-fuel-tank-sending-units-electric-and-mechanical-with-screws-and-washers","title":"Moeller Marine 035728-10 5-Hole Fuel Tank Sending Unit Gasket, Electric and Mechanical","description":"\u003cp\u003eThe Moeller Marine 035728-10 is a universal 5-hole gasket designed to seal fuel tank sending units on aluminum, plastic, or stainless steel fuel tanks used on all types of marine vessels. It is built for top-mounted sending unit installations and works with both electric and mechanical sending units calibrated to the industry-standard 33-240 ohm range. The gasket comes complete with a full set of 10\/24 and 10\/32 replacement screws and assorted washers, so the entire mounting hardware set is on hand for a single, complete installation without hunting for separate fasteners.\u003c\/p\u003e\u003cp\u003eConstructed from black plastic in a round profile matched to standard 5-hole sending unit flanges, the 035728-10 is ethanol compliant, making it suitable for use with today's ethanol-blended marine fuels. It exceeds current NMMA (National Marine Manufacturers Association) and ABYC (American Boat and Yacht Council) specifications, giving boat owners a fuel-system seal that meets recognized marine industry standards. This gasket is the correct choice when replacing a worn, cracked, or leaking seal beneath a fuel level sending unit, restoring a tight fuel-tank seal and preventing vapor or fuel leakage at the sending unit flange.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035728-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 5-Hole Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Electric and mechanical fuel tank sending units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top mounting in aluminum, plastic, or stainless steel fuel tanks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 5-hole gasket, 10\/24 and 10\/32 replacement screws, assorted washers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOhm Range Compatibility:\u003c\/strong\u003e 33-240 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e Exceeds NMMA and ABYC specifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEthanol Compliant:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal 5-hole gasket for top-mounted fuel tank sending units on all types of marine vessels; not restricted to a specific make, model, or year.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo specific OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Moeller 035728-10 gasket fit?\u003c\/strong\u003e The 035728-10 is a universal 5-hole gasket for top-mounted fuel tank sending units on aluminum, plastic, or stainless steel fuel tanks used on all types of marine vessels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this gasket work with electric or mechanical sending units?\u003c\/strong\u003e Yes, the 035728-10 gasket is designed to work with both electric and mechanical fuel tank sending units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is included with the 035728-10 gasket?\u003c\/strong\u003e It comes complete with 10\/24 and 10\/32 replacement screws and an assortment of washers, so the full mounting hardware set is included with the gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 035728-10 gasket compatible with ethanol fuel?\u003c\/strong\u003e Yes, this gasket is ethanol compliant, making it suitable for use with ethanol-blended marine fuels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 035728-10 gasket made from?\u003c\/strong\u003e It is a black plastic gasket with a round shape sized to match standard 5-hole sending unit flanges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the gasket meet marine industry standards?\u003c\/strong\u003e The 035728-10 exceeds current NMMA and ABYC specifications for marine fuel system components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 035728-10 gasket weigh?\u003c\/strong\u003e The gasket weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat ohm range is this gasket compatible with?\u003c\/strong\u003e It is designed for use with sending units calibrated to the industry-standard 33-240 ohm range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 035728-10 gasket a genuine Moeller Marine part?\u003c\/strong\u003e Yes, the 035728-10 is a genuine Moeller Marine fuel tank sending unit gasket, not an aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this gasket be used on any type of boat?\u003c\/strong\u003e Yes, the 035728-10 is a universal gasket intended for top-mounted fuel tank sending units on all types of marine vessels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace the sending unit gasket?\u003c\/strong\u003e A worn, cracked, or hardened gasket beneath a fuel tank sending unit can leak fuel or vapor; the 035728-10 restores a tight seal at the sending unit flange.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 035728-10 include a warranty?\u003c\/strong\u003e The 035728-10 gasket is backed by a limited lifetime warranty from Moeller Marine.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991090245851,"sku":"MOE-035728-10","price":15.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/moe0-035728-10_large__61991.1558176156.500.750.jpg?v=1785188209"},{"product_id":"moeller-marine-035725-10-fuel-tank-sending-unit-4-to-28-in-adjustable-depth-33-240-ohm-sae-5-hole","title":"Moeller Marine Fuel Tank Sending Unit 035725-10, 4-28 Inch Tank Depth, 33-240 Ohm","description":"\u003cp\u003eThe Moeller Marine 035725-10 is a fuel tank sending unit built to monitor fuel level on boat tanks with a depth of 4 to 28 inches (102 to 685 mm). The float arm travels through this depth range and converts the fuel level reading into an electrical resistance signal of 33 to 240 ohms, which is the standard calibration used by dash-mounted electric fuel gauges. This sending unit is designed to work with a dash-mounted gauge, which is sold separately and installed at the helm to give the operator a real-time fuel level reading.\u003c\/p\u003e\u003cp\u003eThe float rod assembly measures 1 5\/8 inches in diameter and mounts to the fuel tank using a standard SAE 5-hole bolt pattern, allowing it to install into any tank deck plate machined to that pattern. The unit is constructed of composite material for corrosion resistance in a marine fuel environment. A mounting gasket and screws are included with the sending unit so it is ready to install without needing to source separate hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035725-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Depth Range:\u003c\/strong\u003e 4 to 28 inches (102 to 685 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Rod Diameter:\u003c\/strong\u003e 1 5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance \/ Calibration Range:\u003c\/strong\u003e 33 to 240 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Pattern:\u003c\/strong\u003e SAE 5-hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Gasket and screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Requires a dash-mounted electric fuel gauge (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat tank depth does the Moeller 035725-10 fit?\u003c\/strong\u003e The 035725-10 is calibrated for fuel tanks with a depth of 4 to 28 inches (102 to 685 mm), covering a wide range of tank sizes with a single float rod.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this sending unit come with a fuel gauge?\u003c\/strong\u003e No, the dash-mounted gauge is sold separately. The 035725-10 is the sending unit only, which sends a resistance signal to a gauge installed at the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat ohm range does the 035725-10 sending unit use?\u003c\/strong\u003e It is calibrated to the standard 33 to 240 ohm range used by dash-mounted electric fuel gauges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting pattern does this sending unit use?\u003c\/strong\u003e The Moeller 035725-10 uses a standard SAE 5-hole mounting pattern to bolt into the tank deck plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with the 035725-10?\u003c\/strong\u003e Yes, a gasket and mounting screws are included with the sending unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the diameter of the float rod on the 035725-10?\u003c\/strong\u003e The float rod diameter is 1 5\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Moeller 035725-10 made of?\u003c\/strong\u003e It is made of composite material, chosen for its resistance to corrosion in a marine fuel tank environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 035725-10 sending unit weigh?\u003c\/strong\u003e The sending unit weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 035725-10 work with any dash-mounted fuel gauge?\u003c\/strong\u003e It is compatible with dash-mounted electric fuel gauges that read the standard 33 to 240 ohm range, which is the calibration used by the 035725-10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is the 035725-10 sending unit?\u003c\/strong\u003e It is manufactured by Moeller, a marine fuel system parts maker.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991090311387,"sku":"MOE-035725-10","price":46.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61RxjKo-n-L.jpg?v=1784491266"},{"product_id":"moeller-035711-10-1-topside-tank-hold-down-kit-72-in-nylon-straps-with-quick-release-buckles-and-stainless-steel-brackets","title":"Moeller Topside Tank Hold Down Kit 035711-10-1, 72 in. Nylon Straps with Stainless Steel Brackets","description":"\u003cp\u003eThe Moeller Topside Tank Hold Down Kit (035711-10-1) is a permanent-mount kit for securing a portable or topside fuel tank in place aboard a boat. The kit includes two universal nylon straps, each 72 inches long, fitted with quick-release buckles so the tank can be released quickly when needed while still staying firmly secured during normal operation. Along with the straps, the kit includes four stainless steel hold down brackets and mounting screws, giving you everything required to anchor the straps to the deck or mounting surface. The stainless steel construction of the brackets and hardware resists corrosion in a marine environment, while the nylon strap material is built to withstand repeated tensioning and outdoor exposure. Because the straps are universal in length and the buckle system is quick-release, this kit works across a range of topside tank placements rather than being limited to a single tank size or shape. This is a permanent-installation kit, meaning the brackets are intended to be mounted in a fixed location on the boat, with the straps then used to hold the tank down against that mounting point. It is a straightforward, functional solution for boaters who need a secure, corrosion-resistant way to keep a fuel tank from shifting while underway.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035711-10-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Type:\u003c\/strong\u003e Topside Tank Hold Down Kit, permanent installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Quantity:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Length:\u003c\/strong\u003e 72 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Material:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Fit:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuckle Type:\u003c\/strong\u003e Quick-release buckle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Quantity:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Screws:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729019993\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Moeller 035711-10-1 Topside Tank Hold Down Kit include?\u003c\/strong\u003e The kit includes two universal nylon straps with quick-release buckles, plus four stainless steel hold down brackets and mounting screws for a permanent installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the straps?\u003c\/strong\u003e Each of the two nylon straps in the 035711-10-1 kit measures 72 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the straps made of?\u003c\/strong\u003e The straps in this Moeller topside tank hold down kit are made of nylon, designed to withstand tensioning and outdoor marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounting brackets come with the kit?\u003c\/strong\u003e Four stainless steel hold down brackets are included with the 035711-10-1 kit, along with their mounting screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the brackets made of?\u003c\/strong\u003e The hold down brackets included in this Moeller kit are stainless steel, chosen for corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting screws included?\u003c\/strong\u003e Yes, the Moeller 035711-10-1 kit includes mounting screws for the four stainless steel brackets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of buckle do the straps use?\u003c\/strong\u003e The straps use a quick-release buckle, allowing the strap to be released quickly while still holding the tank securely during normal use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a permanent or temporary tank hold down solution?\u003c\/strong\u003e The 035711-10-1 is a permanent kit, meaning the brackets are intended to be mounted in a fixed location as part of the installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the hold down kit weigh?\u003c\/strong\u003e The Moeller Topside Tank Hold Down Kit weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill these straps fit any topside fuel tank?\u003c\/strong\u003e The nylon straps in this kit are universal, made to work across a range of topside tank placements rather than one specific tank size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the strap set sold as a single strap or a pair?\u003c\/strong\u003e The 035711-10-1 kit comes with two straps, sold together as a pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the genuine Moeller kit or an aftermarket copy?\u003c\/strong\u003e This is the genuine Moeller Topside Tank Hold Down Kit, part number 035711-10-1.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991090344155,"sku":"MOE-035711-10-1","price":29.12,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/moe-035711-10_lg__34764.1558116189.500.750.jpg?v=1785188514"},{"product_id":"moeller-035724-10-diesel-fuel-tank-sending-unit-with-return-line-35-240-ohm-fits-12-24-in-deep-tanks","title":"Moeller Marine Diesel Fuel Sending Unit with Return Line, 035724-10, Fits 12 to 24 Inch Tanks","description":"\u003cp\u003eThe Moeller Marine 035724-10 is a diesel fuel sending unit built with an integrated return line, designed to meet the return-line requirement found on diesel engines and certain fuel injection engines. It is intended for use in boat fuel tanks ranging from 12 to 24 inches deep and reports fuel level across a 35 to 240 ohm resistance range, matching common dash-mounted fuel gauges. The sending unit uses a swing arm float to track fuel level as it changes, with a 1-way circuit type and a stainless steel construction for durability in a marine fuel tank environment.\u003c\/p\u003e\u003cp\u003eOverall dimensions are 21 1\/2 x 4 7\/8 x 3 inches, and the unit is finished in black. Because fuel level readings from a swing arm float can vary with fuel slosh as the boat moves, momentary fluctuations in the gauge reading are normal and not an indication of a faulty sender. This unit is compatible with diesel engines and fuel injection engines that call for a return line at the sending unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035724-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Sending Unit with Diesel Return Line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Fuel Type:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Depth Compatibility:\u003c\/strong\u003e 12 to 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance Range:\u003c\/strong\u003e 35 to 240 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions (L x W x H):\u003c\/strong\u003e 21 1\/2 x 4 7\/8 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Swing arm float\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 1-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.7 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat tank depths does the Moeller 035724-10 fit?\u003c\/strong\u003e The 035724-10 is designed for fuel tanks that are 12 to 24 inches deep, covering the most common diesel tank depths on recreational boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this sending unit include a return line?\u003c\/strong\u003e Yes, the 035724-10 has a diesel return line built in, meeting the return-line requirement of diesel engines and certain fuel injection engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat resistance range does the 035724-10 use?\u003c\/strong\u003e It reads across a 35 to 240 ohm range, which matches the resistance range expected by common dash-mounted fuel gauges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Moeller 035724-10 made for gasoline or diesel fuel?\u003c\/strong\u003e It is a diesel fuel sending unit, built specifically to meet the return-line requirement of diesel and some fuel injection engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the sending unit made from?\u003c\/strong\u003e The 035724-10 is constructed of stainless steel, chosen for durability inside a marine fuel tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 035724-10?\u003c\/strong\u003e Overall dimensions of the Moeller 035724-10 are 21 1\/2 x 4 7\/8 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does my fuel gauge fluctuate with this sending unit installed?\u003c\/strong\u003e Swing arm float readings, including those from the 035724-10, are subject to momentary fluctuation from fuel slosh as the boat moves; this is normal float behavior, not a fault.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 035724-10 weigh?\u003c\/strong\u003e The 035724-10 weighs 0.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of float mechanism does this sending unit use?\u003c\/strong\u003e It uses a swing arm float to measure fuel level as the float arm moves with changing fuel height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 035724-10 a 1-way or multi-circuit sending unit?\u003c\/strong\u003e The Moeller 035724-10 is a 1-way circuit type sending unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 035724-10 sending unit?\u003c\/strong\u003e The unit is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 035724-10 work with fuel injection engines?\u003c\/strong\u003e Yes, in addition to diesel engines, the 035724-10 is compatible with certain fuel injection engines that require a return line at the sender.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991090376923,"sku":"MOE-035724-10","price":67.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Moeller-Diesel-Electric-Sending-Unit-with-Return-035724-10__35066.1737873811.500.750.jpg?v=1785189143"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/F-7150IMAGE1_1c35e5bf-f0f4-4f84-a832-0e2d07e6ee34.jpg?v=1785359925","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-engine-parts-systems-fuel-system-fuel-tanks-tank-hardware.oembed?page=3","provider":"Good Vibes Marina","version":"1.0","type":"link"}