{"title":"Fuel System","description":null,"products":[{"product_id":"shields-fire-acol-type-a2-fuel-fill-hose-1-1-2-in-id-x-12-1-2-ft-alcohol-resistant-uscg-type-a2-mpn-116-350-1124","title":"Sierra Shields Fire-Acol Fuel Fill Hose 16-350-1124, 1 1\/2 Inch x 12.5 Feet, Type A2","description":"\u003cp\u003eThe Sierra 16-350-1124 is a Fire-Acol \"C\" fuel fill hose built for pleasure boat fuel fill systems where resistance to gasoline and alcohol-blended fuels matters. It measures 1 1\/2 inch inside diameter by 12.5 feet in length, sized to run from a boat's deck fill fitting to the fuel tank. The hose is compounded specifically to resist gasoline\/alcohol blends and is engineered for low permeation, meaning less fuel vapor escapes through the hose wall over time. A special compound also resists cover deterioration caused by alcohol fuel sitting in the hose, a common failure point in fuel fill lines that see ethanol-blended gas.\u003c\/p\u003e\u003cp\u003eConstruction is 2-ply, reinforced with a wire helix embedded between plies of heavy-duty synthetic cord, giving the hose crush resistance while keeping it flexible enough to route through tight fill compartments. The cover is abrasion resistant to stand up to contact with surrounding structure and hardware. This hose is rated to a 90 psi burst pressure and is designed for a -5F to 180F operating temperature range. It is intended for fuel fill service with either gasoline or diesel, for pleasure boats only, and is not rated for use beyond that application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 16-350-1124\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Type:\u003c\/strong\u003e Fire-Acol \"C\" Fuel Fill Hose, Type A2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter:\u003c\/strong\u003e 1 1\/2 inch (38.1 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 1 57\/64 inch (48.0 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePly:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBurst Pressure:\u003c\/strong\u003e 90 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Helix Coil Count:\u003c\/strong\u003e 77\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12.5 feet (3.8 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 19.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range:\u003c\/strong\u003e -5F to 180F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HD synthetic cord with embedded wire helix reinforcement, alcohol\/gasoline-resistant compound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Fuel fill hose for gasoline or diesel, pleasure boats only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999571885\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal fuel fill hose sized by diameter and length rather than by a specific boat make or model; confirm your existing fuel fill hose's inside diameter matches 1 1\/2 inch before ordering.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sierra 16-350-1124 fuel fill hose?\u003c\/strong\u003e It measures 1 1\/2 inch inside diameter by 12.5 feet in length, with a 1 57\/64 inch outside diameter, making it the standard size for many pleasure boat deck fill runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose rated for both gasoline and diesel?\u003c\/strong\u003e Yes, the Fire-Acol Type A2 hose (Sierra 16-350-1124) is used for fuel fill service with either gasoline or diesel on pleasure boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hose handle ethanol-blended fuel?\u003c\/strong\u003e It is compounded to resist gasoline\/alcohol blends and is engineered for low permeation, and a special compound resists cover deterioration caused by alcohol fuel resting in the hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the burst pressure rating of the 16-350-1124 hose?\u003c\/strong\u003e 90 psi is the burst pressure rating for this Sierra fuel fill hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the hose reinforced?\u003c\/strong\u003e A wire helix is embedded between plies of heavy-duty synthetic cord, giving the 2-ply construction crush resistance while keeping the hose flexible for routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range is this fuel fill hose rated for?\u003c\/strong\u003e The Sierra 16-350-1124 hose has an operating temperature range of -5F to 180F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 16-350-1124 hose weigh?\u003c\/strong\u003e This 12.5 foot length weighs 19.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose abrasion resistant?\u003c\/strong\u003e Yes, the cover is abrasion resistant, which helps it hold up where the fuel fill run contacts surrounding structure or hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose approved for use on commercial vessels?\u003c\/strong\u003e No, the Fire-Acol Type A2 hose is intended for fuel fill use on pleasure boats only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many plies does this fuel fill hose have?\u003c\/strong\u003e The 16-350-1124 hose is built with 2 plies reinforced by an embedded wire helix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length does the 16-350-1124 part number cover?\u003c\/strong\u003e This part number corresponds to a 12.5 foot length of 1 1\/2 inch inside diameter Fire-Acol fuel fill hose.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988018737371,"sku":"SIE-16-350-1124","price":148.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_601df0b9-9eeb-47ab-9a7f-84ec0f215271.jpg?v=1785353674"},{"product_id":"sierra-116-355-1123-fire-acol-fuel-fill-hose-1-1-2-i-d-x-10-ft-sae-j1527-type-a2-shields-16-355-1123","title":"Sierra 16-355-1123 Fuel Fill Hose, 1-1\/2 Inch x 10 Feet, Type A2 Low-Permeation","description":"\u003cp\u003eThe Sierra 16-355-1123 is a 1-1\/2 inch fuel fill hose built for pleasure boats, sized at 10 feet in length. It is engineered to resist gasoline\/alcohol (ethanol) blends and is compounded specifically for low permeation, so vapor loss through the hose wall stays minimal over the life of the boat. The hose is abrasion resistant and is reinforced with a wire helix imbedded between plies of heavy-duty synthetic cord, giving it the structural integrity to hold its shape under vacuum during fueling while resisting kinking and collapse.\u003c\/p\u003e\u003cp\u003eThis hose is used for the fuel fill run (gas or diesel) between the deck fill fitting and the fuel tank, and it is rated for pleasure boat use only, not for portable tanks or non-marine applications. It meets SAE J1527 Type A2 and ISO 7840 Type A2 standards and carries NMMA\/CE Type Accepted status, confirming it is built to recognized marine fuel-system safety standards. With a 2-ply synthetic construction, a 1-57\/64 inch outside diameter, and a 90 psi burst rating, it is sized to handle standard fuel-fill plumbing on boats using 1-1\/2 inch fill hose. The same hose diameter is also offered by Sierra in a 10 foot carton-packed version (16-355-1123BX) and in other stock lengths, so buyers replacing a full run or building out fuel-fill plumbing can match the length they need.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 16-355-1123\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Fill Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter:\u003c\/strong\u003e 1-1\/2 inches (38.1 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 1-57\/64 inches (48.0 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePly:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBurst Pressure:\u003c\/strong\u003e 90 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall Thickness:\u003c\/strong\u003e 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Synthetic, HD synthetic cord reinforced with imbedded wire helix\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e SAE J1527 Type A2, ISO 7840 Type A2, NMMA\/CE Type Accepted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Fuel fill hose for gasoline or diesel, pleasure boats only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282199951\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sierra 16-355-1123 fuel fill hose?\u003c\/strong\u003e It has a 1-1\/2 inch inside diameter (38.1 mm) and a 1-57\/64 inch outside diameter (48.0 mm), and it is cut to a 10 foot length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose rated for both gasoline and diesel?\u003c\/strong\u003e Yes, the 16-355-1123 fuel fill hose is used for fuel fill service with either gas or diesel and is intended for pleasure boats only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hose handle ethanol-blended fuel?\u003c\/strong\u003e It resists gasoline\/alcohol blends and is compounded for low permeation, so it is built to handle ethanol-blended pump gas without excessive vapor loss.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat safety standards does the 16-355-1123 meet?\u003c\/strong\u003e This hose meets SAE J1527 Type A2 and ISO 7840 Type A2 standards and carries NMMA\/CE Type Accepted status.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hose construction made of?\u003c\/strong\u003e The 16-355-1123 is a 2-ply synthetic hose reinforced with a wire helix imbedded between plies of heavy-duty synthetic cord, and it is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the burst pressure rating?\u003c\/strong\u003e The hose carries a 90 psi burst pressure rating at its 1-1\/2 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fuel fill hose weigh?\u003c\/strong\u003e The 10 foot length of Sierra 16-355-1123 weighs 7.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose abrasion resistant?\u003c\/strong\u003e Yes, the 16-355-1123 is abrasion resistant, which helps it hold up where it runs against hull structure or other components in the fill line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between 16-355-1123 and 16-355-1123BX?\u003c\/strong\u003e Both are the same 1-1\/2 inch, 10 foot fuel fill hose; 16-355-1123BX is the carton-packaged version of the identical hose, while 16-355-1123 is the standard stock code for the same length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hose be used on a portable fuel tank?\u003c\/strong\u003e No, the 16-355-1123 fuel fill hose is intended for pleasure boat fuel fill installations, not portable tank applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wall thickness does the hose have?\u003c\/strong\u003e The 16-355-1123 has a nominal wall thickness of 0.25 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this hose used on a boat?\u003c\/strong\u003e It is installed as the fuel fill run connecting the deck fill fitting to the fuel tank on pleasure boats.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988018901211,"sku":"SIE-16-355-1123","price":105.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51kvhyf_IWL.jpg?v=1784385232"},{"product_id":"shields-fire-acol-fuel-vent-hose-5-8-in-x-10-ft-uscg-type-a2-sierra-116-369-0583","title":"Sierra Shields Fire-Acol Fuel Vent Hose 16-369-0583, 5\/8 Inch x 10 Feet, USCG Type A2","description":"\u003cp\u003eThe Sierra Shields Fire-Acol Fuel Vent Hose (16-369-0583) is a 5\/8 inch inside diameter marine fuel vent hose supplied in a 10 foot Polypac length. It is built to resist gasoline and alcohol blended fuels and is fire resistant, making it suited for use as a fuel vent line on gasoline engines running fuels blended up to 85% ethanol as well as diesel fuel systems. The hose features a weather and UV resistant NBR\/PVC cover that protects the hose from marine environmental exposure over time.\u003c\/p\u003e\u003cp\u003eThis hose carries an inside diameter of 5\/8 inch (15.9 mm) and an outside diameter of 31\/32 inch (24.6 mm), with a maximum working pressure rating of 50 psi. It is rated for a temperature range of -20 degrees F to 160 degrees F. The hose meets USCG Type A2 requirements for pleasure boats, and meets SAE J1527 Type A2, ISO 7840 Type A2, and NMMA\/CE Type accepted standards, confirming its suitability for fuel vent line service on recreational boats.\u003c\/p\u003e\u003cp\u003eBecause it is a vent line hose rather than a fuel feed hose, it is intended for routing fuel tank vapor rather than pressurized fuel supply. It is sold as a single 10 foot length, ready to cut to the run required for the installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 16-369-0583\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter:\u003c\/strong\u003e 5\/8 inch (15.9 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 31\/32 inch (24.6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure:\u003c\/strong\u003e 50 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Class Code:\u003c\/strong\u003e C-25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.76 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e NBR\/PVC cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multicolored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e -20 degrees F to 160 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards Compliance:\u003c\/strong\u003e USCG Type A2, SAE J1527 Type A2, ISO 7840 Type A2, NMMA\/CE Type accepted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Fuel vent lines for gasoline up to 85% ethanol blended fuels and diesel fuel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFire Resistance:\u003c\/strong\u003e Resists gasoline\/alcohol blended fuel and is fire resistant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal marine fuel vent hose sized at 5\/8 inch inside diameter; no specific make, engine, or model fitment is specified.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the inside diameter of the Sierra 16-369-0583 fuel vent hose?\u003c\/strong\u003e The Sierra 16-369-0583 Shields Fire-Acol Fuel Vent Hose has a 5\/8 inch (15.9 mm) inside diameter and a 31\/32 inch (24.6 mm) outside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this hose?\u003c\/strong\u003e Part number 16-369-0583 is sold in a 10 foot length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose fire resistant?\u003c\/strong\u003e Yes, the Shields Fire-Acol Fuel Vent Hose is fire resistant and resists gasoline\/alcohol blended fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuels is this vent hose rated for?\u003c\/strong\u003e The 16-369-0583 hose is rated for gasoline blended fuels up to 85% ethanol, as well as diesel fuel, when used as a fuel vent line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can this hose handle?\u003c\/strong\u003e This hose is rated for a temperature range of -20 degrees F to 160 degrees F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum working pressure of this hose?\u003c\/strong\u003e The maximum working pressure for the 16-369-0583 fuel vent hose is 50 psi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hose material?\u003c\/strong\u003e The 16-369-0583 hose has an NBR\/PVC cover that is weather and UV resistant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hose meet marine safety standards?\u003c\/strong\u003e Yes, the Sierra Shields Fire-Acol Fuel Vent Hose meets USCG Type A2 requirements for pleasure boats, along with SAE J1527 Type A2, ISO 7840 Type A2, and NMMA\/CE Type accepted standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a fuel feed hose or a fuel vent hose?\u003c\/strong\u003e The 16-369-0583 is a fuel vent hose, designed for venting fuel tank vapor rather than supplying pressurized fuel feed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this hose weigh?\u003c\/strong\u003e The 10 foot length of the Sierra 16-369-0583 fuel vent hose weighs 2.76 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this hose?\u003c\/strong\u003e The Sierra 16-369-0583 fuel vent hose is multicolored.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part?\u003c\/strong\u003e Yes, part number 16-369-0583 is a genuine Sierra Shields Fire-Acol Fuel Vent Hose.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988019458267,"sku":"SIE-16-369-0583","price":41.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51hAucXKoqL.jpg?v=1784385303"},{"product_id":"sierra-silverado-4000-outboard-marine-fuel-line-available-in-5-16-and-3-8-id-10-to-50-lengths","title":"Sierra Silverado 4000 Outboard Fuel Line - Available in 5\/16\" and 3\/8\" ID, 10' to 50' Lengths","description":"\u003cp\u003eThe Sierra Silverado 4000 Outboard Fuel Line is a marine-grade fuel hose built for above-deck primer bulb fuel line applications on outboard-powered boats. It meets SAE J1527 Type B1-15 and is EPA and CARB compliant, and it is resistant to ethanol-blended fuels, making it a safe choice for modern pump-blend gasoline. Construction uses a THV barrier layer to block fuel permeation, a Nitrile jacket, polyester reinforcement for strength, and a weather- and UV-resistant CPE cover. The gray cover is designed to keep the hose cooler and helps prevent vapor lock in the fuel line. This hose is not fire retardant, so it is intended for above-deck use rather than below-deck engine compartment routing.\u003c\/p\u003e\u003cp\u003eThe Silverado 4000 line is offered in two inside diameters, 5\/16 inch and 3\/8 inch, so it covers the fuel line sizing used across a wide range of outboard fuel systems. Each diameter is available in multiple put-up lengths, from a 10 foot polypac coil for smaller repairs to 25 foot and 50 foot cartons for larger installations, rigging shops, and multi-boat fleets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 16-337\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard fuel line \/ marine fuel hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester reinforcement, Nitrile jacket, THV barrier layer, CPE cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e Meets SAE J1527 Type B1-15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e EPA and CARB compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Compatibility:\u003c\/strong\u003e Resistant to ethanol-blended fuels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Above-deck primer bulb fuel line applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFire Retardant:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable Inside Diameters:\u003c\/strong\u003e 5\/16 inch, 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter - 5\/16 Inch Size:\u003c\/strong\u003e 5\/16 inch (7.9 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter - 5\/16 Inch Size:\u003c\/strong\u003e 1\/2 inch (12.75 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter - 3\/8 Inch Size:\u003c\/strong\u003e 3\/8 inch (9.5 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter - 3\/8 Inch Size:\u003c\/strong\u003e 35\/64 inch (13.72 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable Lengths:\u003c\/strong\u003e 10 feet, 25 feet, 50 feet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eFirst pick the inside diameter that matches your boat's existing fuel line or primer bulb fitting, 5\/16 inch or 3\/8 inch. Then choose the length you need: the 10 foot option ships as a coiled polypac, ideal for a single repair or short run, while the 25 foot and 50 foot lengths ship as reel-off cartons suited to full rigging jobs or stocking multiple repairs. Every size and length uses the same Silverado 4000 construction, so performance and compliance are identical across the line.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat sizes does the Sierra Silverado 4000 outboard fuel line come in?\u003c\/strong\u003e This fuel line is available in two inside diameters, 5\/16 inch and 3\/8 inch, covering the fuel line sizing used on most outboard fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat lengths can I order?\u003c\/strong\u003e The Silverado 4000 line ships in 10 foot, 25 foot, and 50 foot lengths, so you can buy a short coil for a single repair or a longer carton for a full rigging job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fuel line safe for ethanol-blended gasoline?\u003c\/strong\u003e Yes, the Silverado 4000 hose is resistant to ethanol-blended fuels and includes a THV barrier layer to prevent fuel permeation through the hose wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat standards does the Sierra Silverado 4000 fuel line meet?\u003c\/strong\u003e It meets SAE J1527 Type B1-15 and is EPA and CARB compliant, the standards that apply to marine fuel line hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Silverado 4000 fuel line fire retardant?\u003c\/strong\u003e No, this hose is not fire retardant. It is designed for above-deck primer bulb fuel line applications rather than fire-rated engine compartment routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Silverado 4000 fuel line made of?\u003c\/strong\u003e Construction includes a THV barrier layer, a Nitrile jacket, polyester reinforcement for strength, and a weather- and UV-resistant CPE cover over a gray outer jacket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the hose gray instead of black?\u003c\/strong\u003e The gray CPE cover on the Silverado 4000 fuel line is designed to keep the hose cooler than a black hose and helps prevent vapor lock in the fuel system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I order the 10 foot polypac or a 25\/50 foot carton?\u003c\/strong\u003e The 10 foot length ships as a coiled polypac and suits a single hose repair, while the 25 foot and 50 foot lengths ship as reel-off cartons for full rigging jobs or stocking several repairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know whether I need 5\/16 inch or 3\/8 inch fuel line?\u003c\/strong\u003e Match the inside diameter to your boat's existing fuel line or primer bulb fitting; the Silverado 4000 line is offered in both 5\/16 inch and 3\/8 inch inside diameter to fit either setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fuel line come with fittings or clamps?\u003c\/strong\u003e No, the Silverado 4000 outboard fuel line is sold as hose only, by length, and does not include fittings or clamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part?\u003c\/strong\u003e Yes, this is a genuine Sierra Silverado 4000 outboard fuel line, part number stem 16-337, not a generic aftermarket substitute.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"3\/8\" \/ 10' Polypac","offer_id":48988026929371,"sku":"SIE-16-337-0383","price":37.49,"currency_code":"USD","in_stock":true},{"title":"3\/8\" \/ 25' Carton","offer_id":48988026962139,"sku":"SIE-16-337-0385","price":141.7,"currency_code":"USD","in_stock":true},{"title":"3\/8\" \/ 50' Carton","offer_id":48988026994907,"sku":"SIE-16-337-0386","price":169.81,"currency_code":"USD","in_stock":true},{"title":"5\/16\" \/ 10' Polypac","offer_id":48988027027675,"sku":"SIE-16-337-0563","price":36.17,"currency_code":"USD","in_stock":true},{"title":"5\/16\" \/ 25' Carton","offer_id":48988027060443,"sku":"SIE-16-337-0565","price":140.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61tZegAJ3HL_2a21bfd4-1452-480c-ad48-0e4d1df108ea.jpg?v=1784385668"},{"product_id":"sierra-shields-series-368-low-permeation-marine-fuel-feed-hose-available-in-5-16-and-3-8-id-10-and-25-lengths","title":"Sierra Shields Low Permeation Marine Fuel Feed Hose - Available in 5\/16\" and 3\/8\" ID, 10' Polypac or 25' Carton","description":"\u003cp\u003eSierra's Shields Series 368 Low Permeation Marine Fuel Feed Hose is built for boaters who need a fuel line that meets today's strict emissions standards without sacrificing durability. The hose uses a plastic barrier veneer bonded to an NBR outer layer tube, which blocks fuel vapor permeation far more effectively than standard rubber fuel hose. A polyester reinforcement layer gives the hose the strength to handle engine bay heat, fuel pressure, and constant exposure to weather and UV light without cracking or going soft.\u003c\/p\u003e\u003cp\u003eThis hose is designed primarily for fuel feed lines, and it is rated for gasoline (including blends up to 85% ethanol), diesel, and all bio-diesel blends, making it a safe choice across gas and diesel-powered boats. It meets USCG Type A1-15 requirements for pleasure boats, along with SAE J1527 Type A1-15, ISO 7840 Type A1, and NMMA\/CE Type accepted standards, so it satisfies both regulatory and insurance requirements for fuel system work. Operating temperature range is -20 degrees F to 212 degrees F, covering everything from cold winter storage to hot engine compartments.\u003c\/p\u003e\u003cp\u003eThis line is sold in two inner diameters, 5\/16\" and 3\/8\", so it fits a wide range of fuel feed line applications from smaller outboard fuel systems to larger stern drive and inboard feed runs. Each size is available in a 10 foot Polypac or a 25 foot reel-off carton, so you can buy just enough for a single hose replacement or stock up for larger jobs and future repairs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 16-368\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Low Permeation Marine Fuel Feed Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable Inner Diameters:\u003c\/strong\u003e 5\/16\" (7.9 mm), 3\/8\" (9.5 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter (5\/16\" ID):\u003c\/strong\u003e 5\/8\" (15.49 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter (3\/8\" ID):\u003c\/strong\u003e 11\/16\" (17.27 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable Lengths:\u003c\/strong\u003e 10 foot Polypac, 25 foot reel-off carton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure:\u003c\/strong\u003e 100 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e -20 degrees F to 212 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester reinforced hose with NBR outer layer tube and plastic barrier veneer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Compatibility:\u003c\/strong\u003e Gasoline (up to 85% ethanol blends), diesel, all bio-diesel blends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e USCG Type A1-15, SAE J1527 Type A1-15, ISO 7840 Type A1, NMMA\/CE Type accepted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eChoose your inner diameter first (5\/16\" or 3\/8\") to match the fuel line you are replacing or the fitting size on your fuel system components, then choose your length. The 10 foot Polypac is suited to single hose repairs, while the 25 foot reel-off carton is a better value for longer runs or when replacing multiple fuel lines at once.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat sizes does the Sierra Shields 16-368 fuel feed hose come in?\u003c\/strong\u003e The Sierra Shields 16-368 low permeation fuel feed hose is available in 5\/16\" inner diameter and 3\/8\" inner diameter, each offered in a 10 foot Polypac or a 25 foot reel-off carton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose rated for ethanol fuel?\u003c\/strong\u003e Yes, the 16-368 fuel feed hose is rated for gasoline blends up to 85% ethanol, along with diesel and all bio-diesel blends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 5\/16\" and 3\/8\" versions?\u003c\/strong\u003e The two sizes differ in inner and outer diameter: the 5\/16\" hose has a 5\/8\" outside diameter, while the 3\/8\" hose has an 11\/16\" outside diameter. Pick the size that matches the diameter of the fuel line you are replacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum working pressure of this hose?\u003c\/strong\u003e The Sierra Shields 16-368 fuel feed hose has a maximum working pressure of 100 psi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can this hose handle?\u003c\/strong\u003e This hose is rated from -20 degrees F to 212 degrees F, so it holds up in both cold winter storage and hot engine compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hose meet USCG requirements for pleasure boats?\u003c\/strong\u003e Yes, the 16-368 hose meets USCG Type A1-15 requirements for pleasure boats, as well as SAE J1527 Type A1-15, ISO 7840 Type A1, and NMMA\/CE Type accepted standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this hose made of?\u003c\/strong\u003e It is a polyester reinforced hose with an NBR outer layer tube and a plastic barrier veneer that reduces fuel vapor permeation compared to standard rubber fuel hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I buy the 10 foot Polypac or the 25 foot carton?\u003c\/strong\u003e The 10 foot Polypac is sized for a single fuel hose repair, while the 25 foot reel-off carton is a better choice for longer fuel line runs or if you plan to replace more than one line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hose be used with diesel fuel?\u003c\/strong\u003e Yes, the Sierra Shields 16-368 fuel feed hose is rated for diesel and all bio-diesel blends in addition to gasoline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose UV and weather resistant?\u003c\/strong\u003e Yes, the low permeation construction of the 16-368 hose is weather and UV resistant, in addition to meeting EPA and CARB very low permeation requirements.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"3\/8\" \/ 10' Polypac","offer_id":48988027191515,"sku":"SIE-16-368-0383","price":35.73,"currency_code":"USD","in_stock":true},{"title":"3\/8\" \/ 25' Carton","offer_id":48988027224283,"sku":"SIE-16-368-0385","price":68.58,"currency_code":"USD","in_stock":true},{"title":"5\/16\" \/ 10' Polypac","offer_id":48988027257051,"sku":"SIE-16-368-0563","price":35.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61-DQ2P5MjL.jpg?v=1784385716"},{"product_id":"sierra-18-7852-marine-fuel-water-separator-available-as-complete-kit-or-filter-with-bonus-pack","title":"Sierra Fuel Water Separator Filter Kit - Available as Standard Kit or Filter with Bonus Pack","description":"\u003cp\u003eThe Sierra 18-7852 Fuel Water Separator Kit protects marine fuel systems by removing over 99.8% of emulsified water from gasoline before it reaches your engine. Rated at 21 microns and flowing up to 90 GPH, it is built to feed even high-demand motors while guarding sensitive inboard, sterndrive, and outboard fuel injection systems against water contamination and the corrosion, hesitation, and injector damage it can cause.\u003c\/p\u003e\u003cp\u003eEach kit centers on a 1\/4\" filter element and includes the mounting hardware needed to add a water-separating stage to your fuel line. The Standard Kit pairs the filter with an 18-7853-1 mounting bracket for a straightforward installation, while the Filter with Bonus Pack version bundles in an 18-4256 pipe plug for a more complete setup. Both configurations use the same 18-7845 fuel filter element as the serviceable replacement cartridge going forward.\u003c\/p\u003e\u003cp\u003eThis kit is a Sierra-branded part built to OEM-equivalent specifications, making it a straightforward swap for factory-installed separators on compatible Mercury and Yamaha powered boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7852\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration Rating:\u003c\/strong\u003e 21 Micron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter Size:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 90 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Removal Efficiency:\u003c\/strong\u003e Removes over 99.8% of emulsified water from gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Aluminum (Standard Kit); Stainless Steel (Filter with Bonus Pack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.32 pounds (Standard Kit); 1 pound (Filter with Bonus Pack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e 18-7845 fuel filter and 18-7853-1 mounting bracket (Standard Kit); adds an 18-4256 pipe plug (Filter with Bonus Pack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e Mercury Marine 35-807172A4, 35-60494A4, 35-805369A4, 35-57250A1, 35-55501A1, 35-52456A1, 35-60494A1, 52444 (Standard Kit); Yamaha MAR-SEPAR-AT-OR (Filter with Bonus Pack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Inboard, sterndrive, and outboard fuel injection systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis kit is offered in two configurations under the same 18-7852 part family. Choose the Standard Kit if you need the core filter and mounting bracket for a new installation or bracket replacement. Choose the Filter with Bonus Pack version if you also need a pipe plug on hand for the install. Both use the same 1\/4\", 21 micron filter element.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-7852 fuel water separator kit do?\u003c\/strong\u003e It removes over 99.8% of emulsified water from gasoline before it reaches the engine, protecting inboard, sterndrive, and outboard fuel injection systems from water contamination. The Sierra 18-7852 kit is rated at 21 microns and flows at up to 90 GPH.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Standard Kit and the Filter with Bonus Pack version?\u003c\/strong\u003e Both use the same 1\/4\", 21 micron filter and 18-7853-1 mounting bracket, but the Filter with Bonus Pack version of the 18-7852 kit also includes an 18-4256 pipe plug for a more complete installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size filter does this kit use?\u003c\/strong\u003e The Sierra 18-7852 kit uses a 1\/4\" filter element rated at 21 microns in both the Standard Kit and Filter with Bonus Pack configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The Standard Kit includes an 18-7845 fuel filter and an 18-7853-1 mounting bracket. The Filter with Bonus Pack version includes those same two parts plus an 18-4256 pipe plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this compatible with Mercury or Yamaha engines?\u003c\/strong\u003e The Standard Kit cross-references to Mercury Marine numbers 35-807172A4, 35-60494A4, 35-805369A4, 35-57250A1, 35-55501A1, 35-52456A1, 35-60494A1, and 52444. The Filter with Bonus Pack version cross-references to Yamaha MAR-SEPAR-AT-OR.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know which variant to order?\u003c\/strong\u003e Order the Standard Kit if you only need the filter and mounting bracket, or the Filter with Bonus Pack version of the 18-7852 if you also want an 18-4256 pipe plug included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the housing made of?\u003c\/strong\u003e The Standard Kit uses an aluminum housing, while the Filter with Bonus Pack version is listed with a stainless steel outer housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat flow rate does the 18-7852 filter support?\u003c\/strong\u003e It supports a flow rate of up to 90 GPH, which is sized to feed high-demand marine engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this filter work with fuel-injected engines?\u003c\/strong\u003e Yes, the Sierra 18-7852 is designed to prevent water damage to sensitive inboard, sterndrive, and outboard fuel injection systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part?\u003c\/strong\u003e Yes, this is a genuine Sierra 18-7852 fuel water separator kit manufactured to OEM-equivalent specifications, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does each version weigh?\u003c\/strong\u003e The Standard Kit weighs 0.32 pounds and the Filter with Bonus Pack version weighs 1 pound.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Kit","offer_id":48988054257883,"sku":"SIE-18-7852-1","price":43.06,"currency_code":"USD","in_stock":true},{"title":"Filter with Bonus Pack","offer_id":48988054290651,"sku":"SIE-18-7852-2","price":51.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7852-2_lg__08371.1558132578.500.750.jpg?v=1785188922"},{"product_id":"sierra-18-7982-marine-fuel-water-separator-available-as-kit-or-kit-with-bonus-spare-filter","title":"Sierra 18-7982 Fuel Water Separator Kit, 1\/4 Inch Aluminum, 10 Micron - Available in Standard Kit or Filter with Bonus Pack","description":"\u003cp\u003eThe Sierra 18-7982 fuel water separator kit protects gasoline fuel-injected marine engines from water contamination and particulate damage. Built around a 1\/4 inch (6.4mm) aluminum tall-filter housing, the kit uses a 10 micron filter element that is over 90% efficient at removing particles as small as 10 microns, while removing over 99.8% of emulsified water from the fuel before it reaches the engine. Rated to flow up to 90 gallons per hour, the filter is sized to keep pace with high-demand fuel-injected motors without restricting flow. It is designed for use on inboard, sterndrive, and outboard fuel-injection systems and is cross-referenced to multiple Mercury Marine fuel-water separator part numbers, making it a straightforward replacement where those numbers are specified.\u003c\/p\u003e\u003cp\u003eThe line is offered in two configurations. The standard kit (18-7982-1) includes one 10 micron aluminum filter element (18-7945) and a mounting base (18-7853-1), giving you everything needed for a complete first-time installation or full kit replacement. The filter with bonus pack (18-7982-2) adds a second, spare filter element on top of the same core kit, so you have a ready replacement element on hand for the next service interval without ordering separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7982\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter Micron Rating:\u003c\/strong\u003e 10 Micron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter Size:\u003c\/strong\u003e 1\/4 inch (6.4mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter Style:\u003c\/strong\u003e Tall Filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Flow Rate:\u003c\/strong\u003e 90 gallons per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Removal Efficiency:\u003c\/strong\u003e Removes over 99.8% of emulsified water from gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParticle Filtration Efficiency:\u003c\/strong\u003e Over 90% efficient at removing particles as small as 10 microns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit for gasoline fuel-injected engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e Mercury 35-802893A4, 35-60494A4, 35-807172A4, 35-60494A1, 35-57250A1, 35-55501A1, 35-52456A1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.36 pounds (Standard Kit); 1.08 pounds (Filter with Bonus Pack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e 1 x 18-7945 filter element and 1 x 18-7853-1 mounting base (Standard Kit); adds a second spare filter element (Filter with Bonus Pack)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eBoth options share the same 1\/4 inch aluminum, 10 micron filter and mounting base. Choose the Standard Kit (18-7982-1) for a first-time install or straight kit replacement. Choose the Filter with Bonus Pack (18-7982-2) if you want a spare filter element included so the next scheduled filter change is already on hand.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-7982 fuel water separator kit remove from the fuel?\u003c\/strong\u003e It removes over 99.8% of emulsified water from gasoline and is over 90% efficient at capturing particles as small as 10 microns, protecting sensitive fuel-injection components from contamination.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fuel connections does this kit use?\u003c\/strong\u003e The Sierra 18-7982 kit is built around a 1\/4 inch (6.4mm) aluminum tall-filter housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 18-7982-1 and 18-7982-2 kits?\u003c\/strong\u003e 18-7982-1 is the standard kit with one 10 micron filter element and mounting base, while 18-7982-2 is the same kit with an added spare filter element for the next service change. Pick the bonus pack version if you want a replacement element already on hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the filter housing made from?\u003c\/strong\u003e The housing is aluminum, matching the tall-filter design used across the 18-7982 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much fuel flow can the 18-7982 filter handle?\u003c\/strong\u003e Up to 90 gallons per hour, which is enough flow to feed high-demand fuel-injected marine engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the Sierra 18-7982 kit?\u003c\/strong\u003e The standard kit includes one 18-7945 filter element and one 18-7853-1 mounting base; the bonus pack version includes those same parts plus a second, spare filter element.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-7982 compatible with Mercury outboards?\u003c\/strong\u003e Yes, it cross-references to Mercury Marine part numbers 35-802893A4, 35-60494A4, 35-807172A4, 35-60494A1, 35-57250A1, 35-55501A1, and 35-52456A1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat types of engines is this fuel water separator designed for?\u003c\/strong\u003e The 18-7982 kit is designed for gasoline fuel-injected inboard, sterndrive, and outboard engines to guard against water damage to the injection system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the spare element in the bonus pack the same filter used in the standard kit?\u003c\/strong\u003e Yes, the 18-7982-2 filter with bonus pack uses the same 10 micron aluminum element as the standard 18-7982-1 kit, just with an extra one included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part or an aftermarket copy?\u003c\/strong\u003e The 18-7982 kit is a genuine Sierra-manufactured fuel water separator, sold as a direct cross-reference replacement for the listed Mercury part numbers.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Kit","offer_id":48988055699675,"sku":"SIE-18-7982-1","price":41.11,"currency_code":"USD","in_stock":true},{"title":"Kit with Bonus Spare Filter","offer_id":48988055732443,"sku":"SIE-18-7982-2","price":49.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__88765.1771539699.500.750.jpg?v=1785188707"},{"product_id":"sierra-10-micron-marine-fuel-water-separator-available-as-complete-kit-or-filter-with-bonus-pack","title":"Sierra 18-7983 Mercury Fuel\/Water Separator Filter - Available as Kit or Filter with Bonus Pack","description":"\u003cp\u003eThe Sierra 18-7983 is a 10 micron fuel\/water separator filter built for Mercury outboard fuel injected engines, designed to protect sensitive fuel injection components from water contamination and debris. The filter uses a 1\/4 inch aluminum short-filter housing and removes over 99.8 percent of emulsified water from gasoline while filtering out over 90 percent of particles as small as 10 microns. Rated to flow up to 90 gallons per hour, it supplies enough clean, dry fuel for high-demand outboard motors without restricting flow.\u003c\/p\u003e\u003cp\u003eEach build includes the core filter element (18-7944) along with the mounting base\/seal component (18-7853-1), giving you a complete water-separating assembly rather than just a replacement cartridge. It is engineered as a direct match for a wide range of Mercury outboards, cross-referencing to numerous Mercury OEM part numbers, so it installs as a factory-equivalent solution. The 18-7983 is offered in two configurations so you can choose the complete kit or a filter that comes bundled with a bonus item, depending on whether you are doing a first-time install or a routine filter change.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7983\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel\/Water Separator Filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicron Rating:\u003c\/strong\u003e 10 Micron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Material:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter Housing Length:\u003c\/strong\u003e Short Filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter Diameter\/Thread Size:\u003c\/strong\u003e 1\/4 inch (6.4mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 90 Gallons Per Hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Removal Efficiency:\u003c\/strong\u003e Over 99.8 percent of emulsified water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParticle Filtration Efficiency:\u003c\/strong\u003e Over 90 percent of particles as small as 10 micron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e 1 filter element (18-7944) and 1 base\/seal component (18-7853-1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit for compatible Mercury outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e Mercury 35-802893A4, Q4, 35-60494A4, 35-807172A4, 35-60494A1, 35-57250A1, 35-55501A1, 35-52456A1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThe Sierra 18-7983 line is available in two configurations. The Fuel\/Water Separator Kit is the complete assembly, ideal for a first-time installation or when the mounting base needs replacing along with the filter. The Filter with Bonus Pack version is intended for buyers who already have the base assembly installed and need a replacement filter, and it ships with an extra bonus item included. Choose based on whether you need the full assembly or just a filter replacement.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat micron rating does the Sierra 18-7983 filter use?\u003c\/strong\u003e The Sierra 18-7983 fuel\/water separator filter uses a 10 micron element, which is over 90 percent efficient at removing particles as small as 10 microns from the fuel stream.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much water can the 18-7983 remove from fuel?\u003c\/strong\u003e It removes over 99.8 percent of emulsified water from gasoline, protecting fuel injected engines from water-related damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Sierra 18-7983?\u003c\/strong\u003e This filter flows at up to 90 gallons per hour, enough capacity to feed high-demand outboard motors without restricting fuel delivery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat Mercury OEM part numbers does the 18-7983 replace?\u003c\/strong\u003e The 18-7983 cross-references to Mercury 35-802893A4, Q4, 35-60494A4, 35-807172A4, 35-60494A1, 35-57250A1, 35-55501A1, and 35-52456A1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fitting does this filter use?\u003c\/strong\u003e The Sierra 18-7983 has a 1\/4 inch (6.4mm) fitting size and uses an aluminum short-filter housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I choose the Kit or the Filter with Bonus Pack?\u003c\/strong\u003e Choose the Fuel\/Water Separator Kit if you need the complete assembly including the base\/seal component, such as for a first-time installation; choose the Filter with Bonus Pack if you already have the base installed and just need a replacement filter, since it comes with an extra bonus item included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 18-7983 kit?\u003c\/strong\u003e The kit configuration of the Sierra 18-7983 includes one filter element (18-7944) and one base\/seal component (18-7853-1).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-7983 a genuine Sierra part or an aftermarket equivalent?\u003c\/strong\u003e The 18-7983 is manufactured by Sierra as a direct-fit aftermarket replacement engineered to Mercury OEM specifications, not a repackaged factory part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the filter housing made of?\u003c\/strong\u003e Both configurations of the 18-7983 use an aluminum outer housing in the short-filter length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this filter work with fuel injected outboard engines?\u003c\/strong\u003e Yes, the Sierra 18-7983 is designed specifically to protect sensitive inboard, sterndrive, and outboard fuel injection systems from water and particulate contamination.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 18-7983 different from other Sierra fuel\/water separators like the 18-7982-1?\u003c\/strong\u003e The 18-7983 uses a short aluminum filter housing with a 1\/4 inch fitting and a 10 micron rating, distinguishing it from other Sierra separators that use a tall housing, a different fitting size, or stainless steel construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the filter need to be replaced on a schedule?\u003c\/strong\u003e Fuel\/water separator filters like the Sierra 18-7983 are a routine maintenance item and should be replaced periodically as part of regular engine service to maintain the rated 90 gallon-per-hour flow and filtration efficiency.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Kit","offer_id":48988057075931,"sku":"SIE-18-7983-1","price":41.73,"currency_code":"USD","in_stock":true},{"title":"Filter with Bonus Pack","offer_id":48988057108699,"sku":"SIE-18-7983-2","price":43.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-7983-2__23442.1739458911.500.750.jpg?v=1785188658"},{"product_id":"sierra-18-0324-carburetor-to-manifold-gasket-for-mercury-outboards-replaces-mercury-27-15172-3","title":"Sierra 18-0324 Carburetor to Manifold Gasket - Replaces Mercury 27-151724, 27-15172-3, 27-93214","description":"\u003cp\u003eThe Sierra 18-0324 is a carburetor to manifold gasket for Mercury outboard engines, designed to create a reliable seal at the joint between the carburetor and the intake manifold. This round gasket is manufactured to meet or exceed the fit, form, and function of the original equipment part it replaces, giving boat owners and marine technicians a dependable option for carburetor service and rebuild work. Sealing this joint properly is important for maintaining correct air-fuel mixture and preventing vacuum or air leaks that can cause rough idling, hesitation, or hard starting.\u003c\/p\u003e\u003cp\u003eThe Sierra 18-0324 cross-references directly to Mercury OEM numbers 27-151724, 27-15172-3, 27-15172, and 27-93214, and is also interchangeable with GLM 32770 and Mallory 9-60048, making it easy to source as a replacement no matter which part number appears on your existing gasket or repair manual. It is a lightweight, single-use gasket intended to be installed once and replaced whenever the carburetor is removed for service, ensuring a fresh, leak-free seal each time the joint is broken.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-0324\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Carburetor to Manifold Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Mercury Outboard Gaskets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999873132\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e Mercury 27-151724, 27-15172-3, 27-15172, 27-93214\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso Interchangeable With:\u003c\/strong\u003e GLM 32770, Mallory 9-60048\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned as a direct cross-reference replacement for Mercury outboard carburetor to manifold gasket applications identified by Mercury part numbers 27-151724, 27-15172-3, 27-15172, and 27-93214.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury 27-151724\u003c\/li\u003e\n\u003cli\u003eMercury 27-15172-3\u003c\/li\u003e\n\u003cli\u003eMercury 27-15172\u003c\/li\u003e\n\u003cli\u003eMercury 27-93214\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-0324 gasket fit?\u003c\/strong\u003e The Sierra 18-0324 is a carburetor to manifold gasket for Mercury outboard engines, cross-referencing Mercury part numbers 27-151724, 27-15172-3, 27-15172, and 27-93214.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-0324 the same as Mercury 27-151724?\u003c\/strong\u003e Yes, the Sierra 18-0324 carburetor to manifold gasket directly cross-references Mercury 27-151724, along with Mercury 27-15172-3, 27-15172, and 27-93214.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape is the 18-0324 carburetor gasket?\u003c\/strong\u003e It is a round gasket, matching the shape of the carburetor to manifold joint it seals on Mercury outboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-0324 weigh?\u003c\/strong\u003e The Sierra 18-0324 carburetor to manifold gasket weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-0324 interchangeable with GLM or Mallory gaskets?\u003c\/strong\u003e Yes, in addition to its Mercury cross-references, the Sierra 18-0324 is also interchangeable with GLM 32770 and Mallory 9-60048.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-0324 a genuine Mercury part or an aftermarket replacement?\u003c\/strong\u003e The 18-0324 is a Sierra aftermarket gasket manufactured to meet or exceed the quality of the original Mercury equipment it replaces, rather than a genuine Mercury-branded part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 18-0324 gasket made of?\u003c\/strong\u003e A specific gasket material is not published for the Sierra 18-0324; it is engineered to provide a reliable seal between the carburetor and intake manifold on applicable Mercury outboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box when I order the 18-0324?\u003c\/strong\u003e Ordering the Sierra 18-0324 gets you one carburetor to manifold gasket for Mercury outboard applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the 18-0324 is the right gasket for my carburetor rebuild?\u003c\/strong\u003e Check your old gasket or parts diagram for Mercury number 27-151724, 27-15172-3, 27-15172, or 27-93214 (or GLM 32770 \/ Mallory 9-60048); any of these match the Sierra 18-0324.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-0324 gasket?\u003c\/strong\u003e The UPC for the Sierra 18-0324 carburetor to manifold gasket is 030999873132.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988064448731,"sku":"SIE-18-0324","price":1.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-0324_lg__55063.1558120667.500.750.jpg?v=1785188365"},{"product_id":"carb-mounting-gasket-for-rochester-2-barrel-replaces-mercruiser-27-64692-fits-mercruiser-crusader-454","title":"Sierra 18-0356 Carb Mounting Gasket, Replaces 1347-818620, for Rochester 2 Barrel Carburetors","description":"\u003cp\u003eThe Sierra 18-0356 is a carburetor base mounting gasket designed to seal the connection between a Rochester 2 barrel carburetor and the intake manifold. This is the same base gasket that Sierra includes with every one of its remanufactured carburetors, and it is also used together with Sierra Carb Kit 18-7070 when performing a full carburetor rebuild. Installing a fresh mounting gasket during any carburetor removal, rebuild, or replacement is essential to prevent air and fuel leaks at the base of the carburetor, which can cause rough idle, poor fuel efficiency, and inconsistent engine performance.\u003c\/p\u003e\u003cp\u003eEach gasket is sold as a single unit and is built to the same fit and material specification as the original equipment gasket it replaces. Because it directly cross-references several OEM and OEM-equivalent part numbers, it is a straightforward drop-in replacement for boat owners and marine technicians servicing Rochester 2 barrel carburetor setups.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-0356\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Carb Mounting Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Carburetor Type:\u003c\/strong\u003e Rochester 2 barrel carburetor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsed With:\u003c\/strong\u003e Sierra Carb Kit 18-7070\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999873439\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 1347-818620, 13478186201, 1347-818620R02\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Rochester 2 barrel carburetors.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003e1347-818620, 13478186201, 1347-818620R02\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat carburetors does the Sierra 18-0356 gasket fit?\u003c\/strong\u003e The Sierra 18-0356 is a base mounting gasket designed for Rochester 2 barrel carburetors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-0356 gasket included with a full carburetor rebuild kit?\u003c\/strong\u003e Yes, this gasket is used together with Sierra Carb Kit 18-7070 when performing a complete carburetor rebuild, and it is also the same base gasket included with every Sierra remanufactured carburetor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does Sierra 18-0356 cross-reference?\u003c\/strong\u003e It replaces OEM numbers 1347-818620, 13478186201, and 1347-818620R02.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets come in one order of part number 18-0356?\u003c\/strong\u003e Each order includes a single Carb Mounting Gasket, matching the unit count of 1 for this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does a carburetor need a base mounting gasket?\u003c\/strong\u003e A base mounting gasket like the 18-0356 seals the joint between the carburetor and the intake manifold to prevent air and fuel leaks that can cause rough idle or poor performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-0356 gasket weigh?\u003c\/strong\u003e The Sierra 18-0356 Carb Mounting Gasket weighs 0.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-0356 an OEM or aftermarket part?\u003c\/strong\u003e It is an aftermarket gasket manufactured by Sierra that is built to match the fit of the OEM base gasket it replaces on Rochester 2 barrel carburetors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace the carburetor base gasket?\u003c\/strong\u003e Anytime the carburetor is removed, rebuilt, or replaced, the base gasket, such as the Sierra 18-0356, should be replaced to ensure a proper seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-0356 gasket?\u003c\/strong\u003e The UPC for the Sierra 18-0356 Carb Mounting Gasket is 030999873439.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-0356 gasket work on its own without a full rebuild kit?\u003c\/strong\u003e Yes, the 18-0356 can be purchased and installed on its own as a replacement base gasket, or used alongside Sierra Carb Kit 18-7070 during a complete rebuild.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988072673499,"sku":"SIE-18-0356","price":7.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-0356_lg__55399.1558118960.500.750.jpg?v=1785188282"},{"product_id":"sierra-18-0384-carburetor-gasket-for-mercury-outboards-replaces-oem-27-89221-1","title":"Sierra Carburetor Gasket 18-0384, Replaces 27-89221-1, Mercury Outboard","description":"\u003cp\u003eThe Sierra Carburetor Gasket 18-0384 is a replacement carburetor gasket sold for Mercury outboard carburetor service and rebuild work. It is used during carburetor overhaul or reassembly to restore a proper seal at the carburetor mounting or body joint, helping prevent air and fuel leaks that can cause rough idle, hard starting, or an inconsistent air\/fuel mixture. This gasket is a genuine Sierra part identified by Sierra part number 18-0384 and is cross-referenced to OEM number 27-89221-1, so it can be ordered as a direct equivalent when that OEM number is called out in a service manual or parts diagram. It is a compact, precision-cut gasket with a small footprint suited to carburetor-body sealing rather than larger engine gaskets, and it ships as an individual gasket rather than a full kit. Because carburetor gaskets are compressed and can take a permanent set once installed, Sierra recommends replacing this gasket any time the carburetor is disassembled rather than reusing the old one. It is intended for Mercury outboard carburetor applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-0384\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Carburetor Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mercury outboard carburetor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces (OEM):\u003c\/strong\u003e 27-89221-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999949622\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Mercury outboard carburetors that use OEM gasket 27-89221-1.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e27-89221-1\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-0384 gasket used for?\u003c\/strong\u003e Sierra 18-0384 is a carburetor gasket used to seal a joint on Mercury outboard carburetors during rebuild or reassembly, helping prevent air and fuel leaks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 18-0384 replace OEM part 27-89221-1?\u003c\/strong\u003e Yes, Sierra part 18-0384 is the equivalent for OEM number 27-89221-1 and can be ordered in place of that number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-0384 carburetor gasket?\u003c\/strong\u003e The gasket measures 0.39 x 0.39 x 0.39 inches, a small, compact size suited to a carburetor body joint rather than a full engine gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-0384 gasket weigh?\u003c\/strong\u003e It weighs 0.01 pounds, consistent with a small individual carburetor gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part or an aftermarket copy?\u003c\/strong\u003e 18-0384 is a genuine Sierra-branded carburetor gasket, not a generic aftermarket copy, though it is built to be a direct equivalent to OEM gasket 27-89221-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse my old carburetor gasket instead of buying 18-0384?\u003c\/strong\u003e It is not recommended; carburetor gaskets like the Sierra 18-0384 take a compression set once installed, so a fresh gasket is needed any time the carburetor is opened up to maintain a proper seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the package for part number 18-0384?\u003c\/strong\u003e The listing for Sierra 18-0384 includes the carburetor gasket itself; it is sold as an individual gasket, not a multi-piece kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines or applications is the 18-0384 gasket used on?\u003c\/strong\u003e Sierra 18-0384 is intended for Mercury outboard carburetor applications that use OEM gasket 27-89221-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-0384 a full carburetor kit or a single gasket?\u003c\/strong\u003e It is a single carburetor gasket, part number 18-0384, not a complete carburetor rebuild kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if 18-0384 is the correct gasket for my carburetor?\u003c\/strong\u003e Check your carburetor's parts diagram or old gasket for OEM number 27-89221-1; if that number is listed, Sierra 18-0384 is the correct replacement.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988072771803,"sku":"SIE-18-0384","price":1.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-0384_lg__28686.1558119947.500.750.jpg?v=1785188010"},{"product_id":"sierra-18-0434-carburetor-mounting-gasket-replaces-omc-johnson-evinrude-909758-glm-31740-volvo-penta-mercruiser-rochester-carb","title":"Sierra 18-0434 Carburetor Mounting Gasket - Replaces GLM 31740, OMC\/Evinrude-Johnson 909758","description":"\u003cp\u003eThe Sierra 18-0434 is a carburetor mounting gasket used to seal the connection between the carburetor and the intake manifold, preventing air and fuel leaks at this joint. It is designed as a direct replacement gasket for the Rochester 7044185 carburetor and is used as part of the Sierra 18-7075 replacement carburetor kit. This gasket meets or exceeds the quality of the original equipment part it replaces, giving installers a reliable seal without sourcing a full carburetor rebuild kit just to replace a worn or damaged gasket.\u003c\/p\u003e\u003cp\u003eBecause carburetor gaskets harden and lose their seal over time from heat cycling and exposure to fuel, replacing the mounting gasket is a routine step during carburetor service, rebuilds, or when troubleshooting a vacuum or fuel leak at the carburetor base. The 18-0434 is sold individually, making it a straightforward, low-cost fix when only the mounting gasket needs to be renewed. It carries the Sierra part number 18-0434 for easy reordering and cross-references directly to several original equipment part numbers used across outboard and marine engine applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-0434\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Carb Mounting Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999873996\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated Carburetor Kit:\u003c\/strong\u003e 18-7075 (for Rochester 7044185 carburetor)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRochester 7044185 carburetor\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGLM 31740\u003c\/li\u003e\n\u003cli\u003eEvinrude\/Johnson 909758\u003c\/li\u003e\n\u003cli\u003eOMC 909758\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-0434 used for?\u003c\/strong\u003e It is a carburetor mounting gasket that seals the joint between the carburetor and the intake manifold, sealing out air and fuel leaks at that connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-0434 gasket cross-reference to any OEM numbers?\u003c\/strong\u003e Yes, the Sierra 18-0434 is interchangeable with GLM 31740, Evinrude\/Johnson 909758, and OMC 909758.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the OMC 909758 the same gasket as the Evinrude\/Johnson 909758?\u003c\/strong\u003e Yes, 909758 is listed as both an OMC and an Evinrude\/Johnson number, and the Sierra 18-0434 cross-references to it under both listings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich carburetor does this gasket fit?\u003c\/strong\u003e The 18-0434 mounting gasket is used with the Rochester 7044185 carburetor and is included in the Sierra 18-7075 replacement carburetor kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-0434 gasket weigh?\u003c\/strong\u003e The Sierra 18-0434 carburetor mounting gasket weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets come in a package?\u003c\/strong\u003e The Sierra 18-0434 is sold as a single gasket, with a unit count of 1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part or a generic aftermarket copy?\u003c\/strong\u003e The 18-0434 is a genuine Sierra part, manufactured to meet or exceed the quality of the original equipment gasket it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need the full 18-7075 carburetor kit, or can I just buy the gasket?\u003c\/strong\u003e The mounting gasket is available on its own as the Sierra 18-0434, so you do not need to purchase the full 18-7075 carburetor kit if only the mounting gasket needs replacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace this carburetor mounting gasket?\u003c\/strong\u003e Replace the 18-0434 gasket when it hardens, cracks, or no longer seals properly, which commonly shows up as a fuel or vacuum leak at the base of the carburetor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-0434 gasket?\u003c\/strong\u003e The UPC for the Sierra 18-0434 carburetor mounting gasket is 030999873996.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988074246363,"sku":"SIE-18-0434","price":6.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-0434_lg__81552.1558118747.500.750.jpg?v=1785188573"},{"product_id":"carburetor-mounting-gasket-for-mercruiser-27-48399-q-jet-carb-base-gasket-sierra-18-0462-118-0462","title":"Sierra 18-0462 Carburetor Mounting Gasket for Universal Q-jet Carburetors","description":"\u003cp\u003eThe Sierra 18-0462 is a carburetor mounting gasket engineered to seal the base of a Universal Q-jet carburetor with electric choke to the intake manifold. It is built to meet or exceed the quality of the original equipment part it replaces, giving boaters a reliable, drop-in seal for carburetor servicing or replacement work. This gasket is the designated replacement gasket for the remanufactured Universal Q-jet carburetor with electric choke, and it is commonly paired with carburetor rebuild work on that same unit.\u003c\/p\u003e\u003cp\u003eUsing the correct mounting gasket is critical to preventing vacuum leaks, fuel leaks, and rough idle or stalling caused by a poor seal between the carburetor base and the intake manifold. The Sierra 18-0462 is manufactured to precise dimensions so it seats correctly without the trimming or fitting issues sometimes seen with generic gaskets. It cross-references directly to GLM 31540, Mallory 9-61003, and Mercruiser 27-48399, making it a straightforward replacement for boaters who already have one of those part numbers specified for their engine.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-0462\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Carburetor Mounting Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e GLM 31540, Mallory 9-61003, Mercruiser 27-48399\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Carburetor:\u003c\/strong\u003e Universal Q-jet Carburetor with Electric Choke (Remanufactured)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for use with the Universal Q-jet carburetor with electric choke (remanufactured). It is the specified replacement gasket for this carburetor and is also used as a mounting gasket for equivalent carburetors cross-referenced below.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGLM 31540\u003c\/li\u003e\n\u003cli\u003eMallory 9-61003\u003c\/li\u003e\n\u003cli\u003eMercruiser 27-48399\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-0462 gasket used for?\u003c\/strong\u003e It is a carburetor mounting gasket that seals the base of a Universal Q-jet carburetor with electric choke to the intake manifold, preventing vacuum and fuel leaks at that joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-0462 the same as GLM 31540?\u003c\/strong\u003e Yes, the Sierra 18-0462 carburetor mounting gasket is interchangeable with GLM 31540, so either part number will fit the same application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-0462 replace Mercruiser 27-48399?\u003c\/strong\u003e Yes. The Sierra 18-0462 gasket is a direct cross-reference for Mercruiser 27-48399 and can be used in its place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 18-0462 also equivalent to Mallory 9-61003?\u003c\/strong\u003e Yes, Mallory 9-61003 cross-references to the Sierra 18-0462 carburetor mounting gasket, so it is interchangeable with that number as well.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-0462 gasket weigh?\u003c\/strong\u003e The Sierra 18-0462 carburetor mounting gasket weighs 0.09 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich carburetor does the 18-0462 gasket fit?\u003c\/strong\u003e The 18-0462 is the specified replacement gasket for the Universal Q-jet carburetor with electric choke.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets come in one order of 18-0462?\u003c\/strong\u003e One Sierra 18-0462 carburetor mounting gasket is included per unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-0462 an OEM or aftermarket gasket?\u003c\/strong\u003e The Sierra 18-0462 is manufactured to meet or exceed the quality of the original equipment gasket it replaces, making it a reliable aftermarket equivalent to the OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a carb kit along with the 18-0462 gasket?\u003c\/strong\u003e The 18-0462 is the mounting gasket only; if a full carburetor rebuild is being performed on the Universal Q-jet with electric choke, a separate carburetor kit would be needed in addition to this gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-0462 gasket stop a rough idle caused by a carburetor base leak?\u003c\/strong\u003e A worn or damaged carburetor mounting gasket is a common cause of vacuum leaks that lead to rough idle, and replacing it with the Sierra 18-0462 restores the seal between the carburetor and intake manifold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the old carburetor mounting gasket instead of buying the 18-0462?\u003c\/strong\u003e Mounting gaskets compress and can lose their seal once removed, so it is recommended to install a new Sierra 18-0462 gasket any time the carburetor is taken off rather than reusing the old one.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988074508507,"sku":"SIE-18-0462","price":8.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-0462_lg__87129.1709562534.500.750.jpg?v=1785188337"},{"product_id":"sierra-18-0685-valve-cover-gasket-replaces-mercury-27-73666-fits-mercruiser-3-7l-224-cid-engines","title":"Sierra Carburetor Mounting Gasket 18-0685, Replaces 27-64692 \u0026 27-32910, For Rochester Carburetors","description":"\u003cp\u003eThe Sierra 18-0685 is a carburetor mounting gasket designed for Rochester carburetors on marine inboard and sterndrive engines. It seals the joint between the carburetor base and the intake manifold, preventing vacuum leaks and unmetered air from entering the intake tract that can cause rough idle, hard starting, or an incorrect air-fuel mixture. Installing a properly sized, marine-grade gasket at this joint is a standard step whenever a carburetor is removed for service, rebuilt, or replaced.\u003c\/p\u003e\u003cp\u003eThis gasket is a direct-fit replacement for Rochester carburetor applications and cross-references to OEM part numbers 27-64692 and 27-32910, so it can be ordered using either the Sierra part number or the original OEM number. It is built to seal reliably against the heat, vibration, and fuel exposure found at the carburetor base on a running marine engine.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-0685\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Carburetor Mounting Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e For Rochester carburetors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e 27-64692, 27-32910\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282120061\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFor Rochester carburetors\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e27-64692\u003c\/li\u003e\n\u003cli\u003e27-32910\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-0685 gasket fit?\u003c\/strong\u003e The Sierra 18-0685 is a carburetor mounting gasket made for Rochester carburetors, sealing the base of the carburetor to the intake manifold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-0685 gasket the same as OEM part 27-64692?\u003c\/strong\u003e Yes, Sierra 18-0685 directly cross-references to OEM numbers 27-64692 and 27-32910, so it can be used as a like-for-like replacement for either of those part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM numbers does this gasket replace?\u003c\/strong\u003e This gasket replaces OEM numbers 27-64692 and 27-32910.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-0685 gasket weigh?\u003c\/strong\u003e The Sierra 18-0685 carburetor mounting gasket weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this gasket work with any carburetor?\u003c\/strong\u003e No, the 18-0685 is designed specifically for Rochester carburetors and should be matched to that application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a new gasket every time I remove the carburetor?\u003c\/strong\u003e Yes, a carburetor mounting gasket like the Sierra 18-0685 should be replaced whenever the carburetor is removed, since reusing a compressed gasket can lead to vacuum leaks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat symptoms indicate a failed carburetor mounting gasket?\u003c\/strong\u003e A failing carburetor base gasket, such as the one replaced by Sierra 18-0685, can cause rough idle, hesitation, or an inconsistent air-fuel mixture from unmetered air entering at the carburetor base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-0685 an OEM or aftermarket part?\u003c\/strong\u003e Sierra 18-0685 is a Sierra-branded replacement gasket engineered to match the fit and sealing performance of the OEM carburetor mounting gaskets it cross-references, 27-64692 and 27-32910.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part 18-0685?\u003c\/strong\u003e Ordering Sierra 18-0685 provides one carburetor mounting gasket sized for Rochester carburetor applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I order this gasket using the OEM part number instead of the Sierra number?\u003c\/strong\u003e Yes, since 18-0685 cross-references to OEM numbers 27-64692 and 27-32910, either number identifies the same gasket.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988084469979,"sku":"SIE-18-0685","price":63.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-0685_lg__41203.1558118643.500.750.jpg?v=1785188179"},{"product_id":"sierra-18-0849-fuel-pump-mounting-gasket-for-yamaha-outboards-replaces-oem-650-24431-a0-00","title":"Sierra 18-0849 Fuel Pump Mounting Gasket - Replaces Yamaha 650-24431-A0-00 - Fits Four-Stroke 9.9-300 HP Outboards, 1999-Current","description":"\u003cp\u003eThe Sierra 18-0849 is a fuel pump mounting gasket engineered as a direct-fit replacement for Yamaha four-stroke outboard motors. It seals the mating surface between the fuel pump and its mounting point on the engine block, maintaining the seal needed to keep fuel flowing cleanly to the carburetor or fuel system without leaks, air intrusion, or pressure loss. A worn, cracked, or compressed original gasket is a common source of fuel pump seepage and rough running, and replacing it with the correctly sized 18-0849 restores a proper seal at a fraction of the cost of a new fuel pump assembly.\u003c\/p\u003e\u003cp\u003eThis gasket is designed to fit Yamaha Four-Stroke outboards from 9.9 hp through 300 hp, model year 1999 and newer. It cross-references directly to Yamaha OEM gasket and fuel pump numbers, so it installs in place of the original part without modification. Each unit ships as a single gasket, making it a simple, low-cost addition to a fuel pump service or rebuild kit for these outboards.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-0849\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Pump Mounting Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282291204\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Yamaha Four-Stroke outboards, 9.9 hp - 300 hp, 1999 and newer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e 904-30142-28-00, 90430-14228-00, 650-24431-A0-00\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eYamaha Four-Stroke outboards, 9.9 hp to 300 hp, 1999 and newer (Current)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e904-30142-28-00\u003c\/li\u003e\n\u003cli\u003e90430-14228-00\u003c\/li\u003e\n\u003cli\u003e650-24431-A0-00\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-0849 fuel pump mounting gasket fit?\u003c\/strong\u003e It fits Yamaha Four-Stroke outboards ranging from 9.9 hp to 300 hp, model year 1999 and newer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-0849 a direct replacement for Yamaha part 650-24431-A0-00?\u003c\/strong\u003e Yes, the 18-0849 gasket cross-references directly to Yamaha 650-24431-A0-00 and installs as a direct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM Yamaha numbers does part 18-0849 cross-reference?\u003c\/strong\u003e Sierra 18-0849 cross-references Yamaha numbers 904-30142-28-00, 90430-14228-00, and 650-24431-A0-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets come in one order of 18-0849?\u003c\/strong\u003e Each order of the Sierra 18-0849 fuel pump mounting gasket includes a package quantity of 1 gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-0849 gasket weigh?\u003c\/strong\u003e The Sierra 18-0849 fuel pump mounting gasket weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the fuel pump mounting gasket do?\u003c\/strong\u003e It seals the joint between the fuel pump and its mounting surface on the Yamaha outboard engine block, preventing fuel or air leaks at that connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-0849 an OEM part or an aftermarket replacement?\u003c\/strong\u003e The 18-0849 is a Sierra-branded aftermarket gasket manufactured to replace the equivalent Yamaha OEM gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill 18-0849 fit a Yamaha outboard built before 1999?\u003c\/strong\u003e The Sierra 18-0849 gasket is specified to fit Yamaha Four-Stroke outboards from model year 1999 and newer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-0849 gasket?\u003c\/strong\u003e The UPC for Sierra fuel pump mounting gasket 18-0849 is 808282291204.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace the fuel pump mounting gasket on my Yamaha outboard?\u003c\/strong\u003e Replace the 18-0849 gasket whenever the fuel pump is removed for service or if fuel seepage is visible at the pump mounting joint on a compatible Yamaha Four-Stroke outboard.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988085944539,"sku":"SIE-18-0849","price":2.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-0849__61812.1772806444.500.750.jpg?v=1785188073"},{"product_id":"sierra-18-0850-9-fuel-pump-gasket-replaces-omc-303615-pack-of-2-evinrude-johnson-outboard","title":"Sierra Fuel Pump Gasket 18-0850-9, Replaces 303615, Pack of 2","description":"\u003cp\u003eThe Sierra 18-0850-9 Fuel Pump Gasket is a replacement gasket engineered for outboard fuel pump mounting applications, sold in a pack of 2 for convenient stocking or dual-side jobs. Each gasket is manufactured to meet or exceed the quality of the original equipment part it replaces, providing a reliable seal between the fuel pump and its mounting surface to prevent fuel leaks and maintain proper pump function. Sierra produces this gasket for outboard fuel pump service and repair, and it is built as a direct fit replacement for the OEM part it corresponds to.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-0850-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Fuel Pump Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282161682\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for outboard fuel pump mounting applications using the same fuel pump mounting gasket as OEM part 303615.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e303615\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-0850-9 Fuel Pump Gasket used for?\u003c\/strong\u003e It seals the mounting surface between an outboard fuel pump and the engine, preventing fuel leaks at that joint. The Sierra 18-0850-9 comes as a pack of 2 gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-0850-9 gasket replace OEM part 303615?\u003c\/strong\u003e Yes, the Sierra 18-0850-9 Fuel Pump Gasket replaces OEM part number 303615.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets come in one package?\u003c\/strong\u003e Two gaskets are included per package of the Sierra 18-0850-9 Fuel Pump Gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-0850-9 gasket?\u003c\/strong\u003e The gasket is grey in color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-0850-9 Fuel Pump Gasket weigh?\u003c\/strong\u003e Each unit weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-0850-9 a genuine Sierra part or aftermarket?\u003c\/strong\u003e It is a genuine Sierra part, manufactured to meet or exceed the quality of the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this gasket?\u003c\/strong\u003e The UPC for the Sierra 18-0850-9 Fuel Pump Gasket is 808282161682.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the 18-0850-9 gasket myself?\u003c\/strong\u003e Installation involves placing the gasket between the fuel pump and its mounting surface during pump removal or replacement; the Sierra 18-0850-9 is sized as a direct replacement for OEM part 303615 for this purpose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does a fuel pump gasket need to be replaced?\u003c\/strong\u003e A worn or damaged fuel pump gasket like the 18-0850-9 can no longer seal properly, which can lead to fuel leaks or air intrusion at the pump mounting joint, so it is replaced whenever the fuel pump is serviced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of engine does the 18-0850-9 gasket fit?\u003c\/strong\u003e The Sierra 18-0850-9 Fuel Pump Gasket is designed for outboard fuel pump mounting applications.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988085977307,"sku":"SIE-18-0850-9","price":4.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-0850_lg__03998.1558121466.500.750.jpg?v=1785188503"},{"product_id":"sierra-18-0889-9-marine-fuel-pump-gasket-pack-of-2-replaces-chris-craft-16-50-00074-mercruiser-27-34213-fits-gm-v-6-and-v-8-marine-engines","title":"Sierra Fuel Pump Gasket 18-0889-9, Pack of 2 - Cross-Reference for Mercruiser, Volvo Penta, Chris-Craft","description":"\u003cp\u003eThe Sierra 18-0889-9 Fuel Pump Gasket is a replacement gasket sized for marine fuel pump installations, sold as a pack of 2 so you have a spare or enough for a two-pump job in one order. It is built to meet or exceed the quality of the original equipment part it replaces, giving a reliable seal between the fuel pump body and mounting surface to prevent fuel leaks and maintain proper pump pressure. At 0.25 inches thick, it is sized to match the OEM gasket profile it is designed to replace.\u003c\/p\u003e\u003cp\u003eThis gasket is manufactured as a direct cross-reference for OEM and aftermarket fuel pump gaskets used across multiple marine engine and sterndrive brands, including Chris-Craft, GLM, Mallory, Mercruiser, Pleasurecraft, Volvo Penta, and Yamaha part numbers. Confirm the OEM number on your existing gasket or fuel pump against the cross-reference list below before ordering to make sure 18-0889-9 is the correct match for your application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-0889-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Thickness:\u003c\/strong\u003e 0.25 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.02 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282161880\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e Chris-Craft 16.50-00074, GLM 31360, Mallory 9-61041, Mercruiser 27-34213, Mercruiser 27-56883, FI500074, Pleasurecraft 3705042, Volvo Penta 3852095, Yamaha YSG-10114-14-1G\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned as a cross-reference replacement gasket for the OEM part numbers listed below; verify your existing gasket or fuel pump OEM number matches one of these before ordering.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eChris-Craft 16.50-00074\u003c\/li\u003e\n\u003cli\u003eGLM 31360\u003c\/li\u003e\n\u003cli\u003eMallory 9-61041\u003c\/li\u003e\n\u003cli\u003eMercruiser 27-34213\u003c\/li\u003e\n\u003cli\u003eMercruiser 27-56883\u003c\/li\u003e\n\u003cli\u003eFI500074\u003c\/li\u003e\n\u003cli\u003ePleasurecraft 3705042\u003c\/li\u003e\n\u003cli\u003eVolvo Penta 3852095\u003c\/li\u003e\n\u003cli\u003eYamaha YSG-10114-14-1G\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-0889-9 fuel pump gasket fit?\u003c\/strong\u003e The 18-0889-9 gasket is manufactured as a direct cross-reference for OEM fuel pump gaskets used on Chris-Craft, Mercruiser, Pleasurecraft, Volvo Penta, and Yamaha equipment, among others. Check the OEM number stamped on your current gasket or fuel pump against the cross-reference list to confirm it matches before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 18-0889-9 the same as Mercruiser 27-34213?\u003c\/strong\u003e Yes, Sierra 18-0889-9 is cross-referenced to replace Mercruiser 27-34213 and 27-56883, along with several other OEM numbers from other brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick is this gasket?\u003c\/strong\u003e The Sierra 18-0889-9 fuel pump gasket measures 0.25 inches thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets come in a pack?\u003c\/strong\u003e This listing for 18-0889-9 includes a pack of 2 gaskets, so you get a spare on hand or enough for two pump installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the gasket weigh?\u003c\/strong\u003e Each package of the Sierra 18-0889-9 fuel pump gasket weighs 0.02 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part or a generic aftermarket copy?\u003c\/strong\u003e It is a genuine Sierra International part, part number 18-0889-9, manufactured to meet or exceed the quality of the original equipment gasket it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the gasket made from?\u003c\/strong\u003e The dossier for 18-0889-9 does not specify a gasket material; buyers with material requirements should confirm compatibility with their fuel system before installing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this gasket if my old one is a GLM or Mallory part number?\u003c\/strong\u003e Yes, 18-0889-9 cross-references to GLM 31360 and Mallory 9-61041, so it can be used as a replacement if either of those numbers matches your original gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install a fuel pump gasket like the 18-0889-9?\u003c\/strong\u003e The 18-0889-9 gasket seats between the fuel pump body and its mounting surface; remove the old gasket material completely, position the new gasket, and reinstall the fuel pump according to the pump manufacturer's torque specifications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this product?\u003c\/strong\u003e An order of Sierra 18-0889-9 includes 2 fuel pump gaskets per package; it does not include the fuel pump itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this gasket fit Volvo Penta applications?\u003c\/strong\u003e Yes, the 18-0889-9 gasket cross-references Volvo Penta part number 3852095.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988086206683,"sku":"SIE-18-0889-9","price":4.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-0889_lg__20930.1661520753.500.750.jpg?v=1785188611"},{"product_id":"sierra-18-0994-9-carburetor-mounting-gasket-2-pack-replaces-mercruiser-27-70143-fits-mercruiser-250-270","title":"Sierra Carburetor Mounting Gasket 18-0994-9 for Rochester 7044185 Carburetors, Pack of 2","description":"\u003cp\u003eThe Sierra 18-0994-9 Carburetor Mounting Gasket seals the connection between a Rochester 7044185 carburetor and its intake manifold, restoring a proper seal that prevents vacuum leaks, rough idle, and air\/fuel mixture problems caused by a worn or hardened original gasket. Each package contains 2 gaskets, so you have a spare on hand or enough to service more than one unit in the same job. As a direct-fit replacement engineered to Sierra's quality standards, it meets or exceeds the quality of the original equipment gasket it replaces, giving installers confidence that fit and sealing performance will match or exceed factory expectations.\u003c\/p\u003e\u003cp\u003eThis gasket is designed as a maintenance and rebuild component for marine carburetor service, where a proper seal at the carburetor base is critical to consistent engine performance on the water. It is commonly replaced any time the carburetor is removed for cleaning, rebuilding, or float service, since reusing an old gasket risks an incomplete seal. For a full carburetor rebuild rather than a gasket-only replacement, Sierra also offers carb kit 18-7075 as a more complete service option, and a companion gasket, 18-0434, is used alongside this gasket on the Rochester 7044185 carburetor.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-0994-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Carburetor Mounting Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 2 gaskets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282162269\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Carburetor:\u003c\/strong\u003e Rochester 7044185\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated Rebuild Kit:\u003c\/strong\u003e Sierra 18-7075\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompanion Gasket:\u003c\/strong\u003e Sierra 18-0434\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRochester 7044185 carburetor\u003c\/li\u003e\n\u003cli\u003eUsed together with companion gasket 18-0434 on this carburetor\u003c\/li\u003e\n\u003cli\u003eSierra carb kit 18-7075 available as a full rebuild alternative\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBarr MC472770143\u003c\/li\u003e\n\u003cli\u003eGLM 32180\u003c\/li\u003e\n\u003cli\u003eMallory 9-61011\u003c\/li\u003e\n\u003cli\u003eMercruiser 27-8079821\u003c\/li\u003e\n\u003cli\u003eMercruiser 27-701431\u003c\/li\u003e\n\u003cli\u003eMercruiser 27-807982\u003c\/li\u003e\n\u003cli\u003eMercruiser 27-70143\u003c\/li\u003e\n\u003cli\u003eMercruiser 27-80798B\u003c\/li\u003e\n\u003cli\u003eMercruiser 27-70143B1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat carburetor does the Sierra 18-0994-9 gasket fit?\u003c\/strong\u003e The Sierra 18-0994-9 mounting gasket is designed for the Rochester 7044185 carburetor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets come in a package of 18-0994-9?\u003c\/strong\u003e Each package of the Sierra 18-0994-9 carburetor mounting gasket contains 2 gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-0994-9 gasket interchangeable with Mercruiser part numbers?\u003c\/strong\u003e Yes, the 18-0994-9 gasket is interchangeable with Mercruiser 27-8079821, 27-701431, 27-807982, 27-70143, 27-80798B, and 27-70143B1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 18-0994-9 cross-reference to any other aftermarket brands?\u003c\/strong\u003e The Sierra 18-0994-9 gasket also cross-references to Barr MC472770143, GLM 32180, and Mallory 9-61011.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-0994-9 gasket set weigh?\u003c\/strong\u003e The Sierra 18-0994-9 carburetor mounting gasket, packaged as a set of 2, weighs 0.09 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a second gasket for the Rochester 7044185 carburetor?\u003c\/strong\u003e Yes, the Rochester 7044185 carburetor uses gasket 18-0994 together with a companion gasket, Sierra 18-0434, so both may be needed for a complete reseal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a full rebuild kit available instead of just the gasket?\u003c\/strong\u003e Sierra offers carb kit 18-7075 as a replacement option if you need a full carburetor rebuild kit rather than the 18-0994-9 mounting gasket alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-0994-9 gasket meet OEM quality standards?\u003c\/strong\u003e Sierra states that the 18-0994-9 carburetor mounting gasket meets or exceeds the quality of the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace the carburetor mounting gasket?\u003c\/strong\u003e The 18-0994-9 gasket should be replaced any time the Rochester 7044185 carburetor is removed for cleaning, rebuilding, or service, since a reused gasket may not seal properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-0994-9 gasket?\u003c\/strong\u003e The UPC for the Sierra 18-0994-9 carburetor mounting gasket, 2-pack, is 808282162269.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988086796507,"sku":"SIE-18-0994-9","price":31.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-0994-9_lg__83324.1685970933.500.750.jpg?v=1785188224"},{"product_id":"sierra-18-1241-float-bowl-and-nozzle-gasket-marine-carburetor-gasket","title":"Sierra 18-1241 Float Bowl and Nozzle Gasket","description":"\u003cp\u003eThe Sierra 18-1241 Float Bowl and Nozzle Gasket seals the float bowl and nozzle assembly on marine carburetors, providing a leak-free connection between mating surfaces during fuel system service and rebuilds. As part of Sierra's engineered gasket lineup, it is built to meet the demands of high horsepower marine engines operating in harsh marine environments, and Sierra states that its products meet or exceed the quality of the original equipment part they replace. This gasket is intended as a direct fit for the float bowl and nozzle location it is designed for, making it a straightforward replacement when rebuilding or servicing a carburetor float bowl. It ships as a single gasket (quantity of 1) and is identified by Sierra part number 18-1241. Boat owners and marine technicians use this gasket during routine carburetor maintenance, float bowl gasket replacement, or when addressing fuel leaks or drips at the float bowl and nozzle joint. Because gaskets compress and can dry out or lose sealing ability over time, replacing this gasket whenever the float bowl is removed for cleaning or inspection is standard practice to maintain a proper seal and prevent fuel leaks.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-1241\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Float Bowl and Nozzle Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999874887\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-1241 gasket fit?\u003c\/strong\u003e The Sierra 18-1241 is a Float Bowl and Nozzle Gasket designed to seal the float bowl and nozzle assembly on a marine carburetor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets come in a package of 18-1241?\u003c\/strong\u003e Sierra part number 18-1241 ships as a single gasket, with a quantity of one item per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-1241 gasket meet OEM quality standards?\u003c\/strong\u003e Yes, Sierra states that this Float Bowl and Nozzle Gasket meets or exceeds the quality of the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace the float bowl and nozzle gasket?\u003c\/strong\u003e Replace the 18-1241 gasket any time the carburetor float bowl is removed for cleaning, inspection, or repair, since a compressed or worn gasket can allow fuel leaks at the joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the Sierra 18-1241 gasket?\u003c\/strong\u003e The Sierra 18-1241 Float Bowl and Nozzle Gasket weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-1241 a genuine Sierra part or aftermarket?\u003c\/strong\u003e 18-1241 is a genuine Sierra part number, manufactured by Sierra to meet or exceed original equipment specifications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part number 18-1241?\u003c\/strong\u003e Ordering 18-1241 includes one Float Bowl and Nozzle Gasket; no other hardware or components are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-1241 gasket be reused after removal?\u003c\/strong\u003e Gaskets like the 18-1241 are designed for one-time use; once a float bowl is disassembled, installing a new 18-1241 gasket is recommended to ensure a proper seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sierra 18-1241 gasket identified for ordering?\u003c\/strong\u003e This gasket is identified by Sierra part number 18-1241 and UPC 030999874887.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 18-1241 different from other Sierra carburetor gaskets like 18-2579 or 18-2582?\u003c\/strong\u003e Yes, 18-1241 is specifically the Float Bowl and Nozzle Gasket, a distinct Sierra part number from other carburetor bowl gaskets such as 18-2579 or 18-2582, which are separate products for different applications.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988087156955,"sku":"SIE-18-1241","price":5.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-1241_lg__20456.1558119911.500.750.jpg?v=1785188853"},{"product_id":"carburetor-mounting-gasket-27-67751-for-mercury-outboards","title":"Sierra Carburetor Mounting Gasket 18-2509 Replaces 27-67751","description":"\u003cp\u003eThe Sierra 18-2509 Carburetor Mounting Gasket seals the joint between the carburetor and intake manifold, preventing air and fuel leaks that can cause a lean-running condition, rough idle, or hard starting. This gasket is a direct cross-reference for OEM number 27-67751, making it a straightforward replacement when servicing the carburetor mounting surface. As a mounting gasket, it is designed to create a reliable, uniform seal against the mating surfaces of the carburetor base and manifold, restoring proper compression and preventing unmetered air from entering the fuel\/air mixture. Replacing a worn or hardened carburetor mounting gasket is a routine step whenever the carburetor is removed for cleaning, rebuilding, or replacement, and using the correct gasket helps avoid vacuum leaks that are difficult to diagnose once the carburetor is reinstalled. The Sierra 18-2509 is lightweight and sized specifically for this mounting application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2509\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Carburetor Mounting Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999312068\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.04 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e27-67751\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2509 gasket fit?\u003c\/strong\u003e The Sierra 18-2509 is a carburetor mounting gasket that seals the carburetor to the intake manifold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-2509 a direct replacement for OEM 27-67751?\u003c\/strong\u003e Yes, the Sierra 18-2509 carburetor mounting gasket directly cross-references to OEM number 27-67751.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-2509 carburetor mounting gasket weigh?\u003c\/strong\u003e It weighs 0.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace the carburetor mounting gasket?\u003c\/strong\u003e Replace the Sierra 18-2509 whenever the carburetor is removed for cleaning, rebuilding, or replacement, or if you notice a vacuum leak, rough idle, or hard starting caused by a worn or hardened gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens if the carburetor mounting gasket fails?\u003c\/strong\u003e A failed carburetor mounting gasket, such as the Sierra 18-2509, allows unmetered air into the fuel\/air mixture, which can cause a lean-running condition, rough idle, or difficulty starting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-2509 gasket?\u003c\/strong\u003e The UPC for the Sierra 18-2509 carburetor mounting gasket is 030999312068.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this gasket be reused after removal?\u003c\/strong\u003e No, the Sierra 18-2509 carburetor mounting gasket should be replaced with a new one any time the carburetor is removed, since gaskets do not reseal reliably once disturbed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-2509 an OEM or aftermarket gasket?\u003c\/strong\u003e The Sierra 18-2509 is an aftermarket gasket manufactured to cross-reference and replace OEM part 27-67751.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-2509?\u003c\/strong\u003e Ordering the Sierra 18-2509 includes one carburetor mounting gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-2509 require any additional sealant?\u003c\/strong\u003e The dossier does not specify a sealant requirement for the 18-2509 carburetor mounting gasket; follow your engine manufacturer's service instructions for installation.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988106784987,"sku":"SIE-18-2509","price":1.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2509_lg__29538.1558123071.500.750.jpg?v=1785329153"},{"product_id":"sierra-18-2575-9-carburetor-bowl-gasket-2-pack-replaces-mercury-1399-99-glm-32190-marine-outboard-fuel-system","title":"Sierra Carb Bowl Gasket 18-2575-9, Replaces Mercury 1399-99, Pack of 2","description":"\u003cp\u003eThe Sierra 18-2575-9 Carb Bowl Gasket is a round carburetor bowl gasket sold in a package of 2, designed as a direct replacement for Mercury marine part 1399-99. This gasket seals the carburetor bowl to the carburetor body, preventing fuel leaks and maintaining proper air-fuel mixture at the seal surface. Because carburetor bowl gaskets compress and lose their seal over time from heat cycling and fuel exposure, they are a routine wear item that should be replaced whenever the carburetor bowl is removed for cleaning, float adjustment, or jet service.\u003c\/p\u003e\u003cp\u003eEach package contains 2 gaskets, so a spare is on hand for the next service interval or for outboards with more than one carburetor. The round shape and dimensions are matched to the Mercury outboard carburetor bowls used with part 1399-99, so installation is a straightforward bowl-off, gasket-swap, bowl-on job with no modification required. Sierra manufactures this gasket to be a fit-for-fit and function-for-function match to the original equipment part it replaces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2575-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Carburetor Bowl Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2 gaskets per package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282163099\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury marine outboard carburetors originally equipped with part number 1399-99\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1399-99\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2575-9 carb bowl gasket fit?\u003c\/strong\u003e The Sierra 18-2575-9 is a direct replacement for Mercury marine carburetor bowl gasket 1399-99, sealing the carburetor bowl to the carburetor body on the Mercury outboards that originally used that part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets come in a package of 18-2575-9?\u003c\/strong\u003e Each package of the 18-2575-9 carb bowl gasket contains 2 gaskets, which covers a single carburetor service with a spare for the next one or a second carburetor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape is the 18-2575-9 carb bowl gasket?\u003c\/strong\u003e The 18-2575-9 gasket is round, matching the mounting flange of the carburetor bowl it seals on Mercury outboard applications using original part 1399-99.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 1399-99 cross-reference to the Sierra 18-2575-9?\u003c\/strong\u003e Yes, Sierra part 18-2575-9 is manufactured to replace Mercury marine part number 1399-99 and installs in the same location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-2575-9 carb bowl gasket weigh?\u003c\/strong\u003e The Sierra 18-2575-9 carb bowl gasket weighs 0.01 pounds per package of 2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace the carburetor bowl gasket on my Mercury outboard?\u003c\/strong\u003e Replace the 18-2575-9 carb bowl gasket any time the carburetor bowl is removed for cleaning, float service, or jet replacement, since the compressed gasket rarely reseals reliably once disturbed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2575-9 gasket genuine Mercury or aftermarket?\u003c\/strong\u003e The 18-2575-9 is a Sierra-manufactured aftermarket gasket built to replace Mercury part 1399-99, not a Mercury-branded original equipment part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-2575-9?\u003c\/strong\u003e Ordering the Sierra 18-2575-9 gets you one package containing 2 round carburetor bowl gaskets; no other hardware is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the 18-2575-9 carb bowl gasket myself?\u003c\/strong\u003e Installation is straightforward: remove the carburetor bowl, remove the old gasket, seat the new 18-2575-9 gasket, and reinstall the bowl, making it a job most owners can do without special tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2575-9 gasket reusable after removal?\u003c\/strong\u003e No, carburetor bowl gaskets like the 18-2575-9 are designed for one-time use and should be replaced with a fresh gasket from the package each time the bowl is removed.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988107440347,"sku":"SIE-18-2575-9","price":1.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2575-9__68549.1737860024.500.750.jpg?v=1785188948"},{"product_id":"carb-mounting-gasket-27-48164-1-for-mercury-outboard-carburetor-sierra-18-2802","title":"Sierra 18-2802 Carburetor Flange Gasket, Replaces 27-48164 - Mercury Outboard, Pack of 2","description":"\u003cp\u003eThe Sierra 18-2802 is a carburetor flange gasket engineered as a direct replacement for Mercury outboard engines. It seals the mating surface between the carburetor and the intake manifold flange, preventing air and fuel leaks that can cause rough idle, lean running conditions, or hard starting. Each package contains 2 gaskets, giving you a spare on hand for a future service or enough to cover a twin-carburetor setup in one order.\u003c\/p\u003e\u003cp\u003eThis gasket is sold under the Sierra part number 18-2802 and cross-references directly to the original Mercury numbers 27-48164 and 27-481641, so it can be ordered with confidence as a like-for-like replacement during carburetor removal, rebuild, or gasket-set service. At 0.04 pounds, it is a lightweight, thin-profile flange gasket sized to fit its intended carburetor mounting flange without modification.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2802\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Carburetor Flange Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2 gaskets per package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces (OEM):\u003c\/strong\u003e 27-48164, 27-481641\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mercury outboard engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282258054\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for Mercury outboard engines.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e27-48164\u003c\/li\u003e\n\u003cli\u003e27-481641\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2802 gasket fit?\u003c\/strong\u003e The Sierra 18-2802 carburetor flange gasket is designed for Mercury outboard engines, sealing the carburetor-to-intake-manifold flange joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM numbers does part 18-2802 replace?\u003c\/strong\u003e Sierra 18-2802 replaces Mercury OEM numbers 27-48164 and 27-481641, so either original number can be used to confirm this is the correct gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets come in one package of 18-2802?\u003c\/strong\u003e Each package of the Sierra 18-2802 carburetor flange gasket contains 2 gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-2802 gasket weigh?\u003c\/strong\u003e The Sierra 18-2802 carburetor flange gasket weighs 0.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2802 a genuine Mercury part or an aftermarket replacement?\u003c\/strong\u003e The Sierra 18-2802 is a Sierra-branded replacement gasket manufactured to match the fit and function of Mercury OEM numbers 27-48164 and 27-481641, rather than a part sold under the Mercury brand itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen would I need to replace this carburetor flange gasket?\u003c\/strong\u003e This gasket, Sierra part 18-2802, should be replaced any time the carburetor is removed from a Mercury outboard for cleaning, rebuilding, or service, since the original gasket material can tear or lose its seal once disturbed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens if this gasket fails or is left out during reassembly?\u003c\/strong\u003e A failed or missing 18-2802 flange gasket at the carburetor-to-manifold joint can allow air or fuel leaks, leading to a rough idle, lean-running condition, or hard starting on the affected Mercury outboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-2802 package include enough gaskets for a twin-carburetor engine?\u003c\/strong\u003e Yes, the package of 2 gaskets included with Sierra 18-2802 is sized to cover a twin-carburetor application in a single order, or to leave a spare for a future service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I order this part using the Mercury number instead of the Sierra number?\u003c\/strong\u003e Yes, since Sierra 18-2802 replaces Mercury numbers 27-48164 and 27-481641, either the Sierra or original Mercury number will point to the same gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-2802 gasket?\u003c\/strong\u003e An order of Sierra 18-2802 includes one package containing 2 carburetor flange gaskets; no other hardware or components are included.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988113436891,"sku":"SIE-18-2802","price":0.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2802_lg__12986.1558124264.500.750.jpg?v=1785329145"},{"product_id":"sierra-18-2881-9-fuel-tank-housing-to-tank-gasket-replaces-johnson-evinrude-332403-fits-6-gallon-portable-fuel-tanks-pack-of-2","title":"Sierra 18-2881-9 Housing to Tank Gasket, Replaces 332403 125530, for 6 Gallon Fuel Tank, Pack of 2","description":"\u003cp\u003eThe Sierra 18-2881-9 Housing to Tank Gasket seals the connection between the fuel pickup housing and a 6 gallon outboard fuel tank, restoring a tight seal that prevents fuel leaks and air intrusion at the housing-to-tank joint. Each package contains 2 gaskets, giving you a spare or enough material to service two tanks in one order. This gasket is a direct fit replacement designed to meet or exceed the performance of the original equipment part it replaces, making it a straightforward swap during routine fuel system maintenance or when an old gasket has hardened, cracked, or lost its seal. Because a worn housing-to-tank gasket is a common source of fuel odor, weeping fuel, or a tank that will not hold pressure properly, replacing it with the correct Sierra part restores reliable operation without needing to replace the entire fuel tank housing assembly. The gasket is manufactured by Sierra International, a supplier of marine engine and fuel system parts, and is intended specifically for use with 6 gallon fuel tanks. Keep a package on hand as part of routine outboard fuel tank upkeep so a small, inexpensive gasket does not turn into a bigger fuel system problem.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2881-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Housing to Tank Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Pack of 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 6 Gallon Fuel Tank\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e6 Gallon Fuel Tank\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e332403\u003c\/li\u003e\n\u003cli\u003e125530\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2881-9 gasket fit?\u003c\/strong\u003e The Sierra 18-2881-9 Housing to Tank Gasket is made for 6 gallon fuel tanks, sealing the joint between the fuel pickup housing and the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets come in a package?\u003c\/strong\u003e Each package of the Sierra 18-2881-9 Housing to Tank Gasket contains 2 gaskets, sold as a pack of 2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich OEM part numbers does this gasket replace?\u003c\/strong\u003e This gasket replaces OEM numbers 332403 and 125530.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2881-9 gasket a genuine Sierra part or aftermarket?\u003c\/strong\u003e It is a genuine Sierra part manufactured by Sierra International, engineered to meet or exceed the performance of the original equipment gasket it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the gasket weigh?\u003c\/strong\u003e The Sierra 18-2881-9 Housing to Tank Gasket weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace the housing to tank gasket on my fuel tank?\u003c\/strong\u003e Replace the gasket if you notice fuel odor, visible leaking, or weeping at the housing-to-tank joint on a 6 gallon fuel tank, as these are signs the seal has hardened or worn out, which the Sierra 18-2881-9 is designed to fix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this gasket fit tanks other than a 6 gallon fuel tank?\u003c\/strong\u003e No, the Sierra 18-2881-9 Housing to Tank Gasket is specified for use with 6 gallon fuel tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of the 18-2881-9 gasket straightforward?\u003c\/strong\u003e Yes, it is a direct replacement gasket that installs at the housing-to-tank joint in place of the original gasket, requiring no modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-2881-9?\u003c\/strong\u003e An order of the Sierra 18-2881-9 includes one package containing 2 Housing to Tank Gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Sierra 18-2881-9 work as a replacement for a cracked or hardened original gasket?\u003c\/strong\u003e Yes, it is intended as a direct replacement for a worn, cracked, or hardened original housing-to-tank gasket on a 6 gallon fuel tank.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988132540635,"sku":"SIE-18-2881-9","price":7.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-2881-9__84599.1722359227.500.750.jpg?v=1785188168"},{"product_id":"fuel-tank-gasket-for-6-gallon-tank-replaces-oem-332403-125530-johnson-evinrude-sierra-18-2887-9-pack-of-2","title":"Sierra Fuel Tank Gasket 18-2887-9, Replaces 302557, Pack of 2","description":"\u003cp\u003eThe Sierra 18-2887-9 Fuel Tank Gasket is a replacement gasket built for Johnson and Evinrude fuel tank applications. It seals the connection at the fuel tank fitting to prevent fuel leaks and maintain a proper seal between mating surfaces, restoring the fit and function of the original equipment gasket it replaces. This gasket is sold as a package of two, so buyers have a spare on hand or enough to service two tanks in a single order.\u003c\/p\u003e\u003cp\u003eSierra manufactures this gasket to meet or exceed the performance of the original equipment part number it replaces, making it a straightforward drop-in replacement for Johnson and Evinrude fuel tanks that use the 302557 gasket. It is a lightweight, low-cost wear item that is worth replacing any time a fuel tank fitting is removed or serviced, since a worn or compressed gasket is a common source of small fuel leaks or a loose fuel tank seal.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2887-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Fuel Tank Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Pack of 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282163921\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eJohnson and Evinrude fuel tank applications\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e302557\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2887-9 fuel tank gasket fit?\u003c\/strong\u003e The 18-2887-9 fuel tank gasket is built for Johnson and Evinrude fuel tank applications, sealing the fuel tank fitting to prevent leaks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets come in a package of 18-2887-9?\u003c\/strong\u003e Each package of the Sierra 18-2887-9 fuel tank gasket contains 2 gaskets, so you have a spare or enough for two tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does 18-2887-9 replace?\u003c\/strong\u003e 18-2887-9 replaces OEM part number 302557 on applicable Johnson and Evinrude fuel tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-2887-9 gasket weigh?\u003c\/strong\u003e The 18-2887-9 fuel tank gasket weighs 0.13 pounds per package of 2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2887-9 gasket genuine OEM or aftermarket?\u003c\/strong\u003e 18-2887-9 is a Sierra aftermarket replacement gasket manufactured to meet or exceed the performance of the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace the fuel tank gasket on my Johnson or Evinrude tank?\u003c\/strong\u003e Replace the 18-2887-9 gasket any time the fuel tank fitting is removed for service or if you notice a fuel leak or loose seal at the fitting, since the gasket is a wear item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order 18-2887-9?\u003c\/strong\u003e An order of Sierra 18-2887-9 includes one package containing 2 fuel tank gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan 18-2887-9 be used on other outboard brands besides Johnson and Evinrude?\u003c\/strong\u003e The 18-2887-9 gasket is designated for Johnson and Evinrude fuel tank applications; fitment on other brands is not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-2887-9 gasket come with an installation guide?\u003c\/strong\u003e The 18-2887-9 package includes the gaskets only; no separate installation guide is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-2887-9 fuel tank gasket?\u003c\/strong\u003e The UPC for the Sierra 18-2887-9 fuel tank gasket, pack of 2, is 808282163921.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988132933851,"sku":"SIE-18-2887-9","price":10.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_f94400a4-a129-4a25-9e5d-1c57a39d2384.jpg?v=1785353674"},{"product_id":"sierra-18-33104-fuel-injector-for-mercruiser-7-4l-mpi-l29-replaces-oem-802632","title":"Sierra Fuel Injector 18-33104, Replaces 802632T\/802632, Fits MCM\/MIE 7.4L MPI L29","description":"\u003cp\u003eThe Sierra 18-33104 is a metal fuel injector engineered as a direct replacement for MCM\/MIE 7.4L MPI L29 marine engines. It delivers precise fuel metering through a needle-valve design, restoring proper spray pattern and fuel delivery on engines with a worn, clogged, or failed factory injector. The body measures 5 x 4 x 1 inches and features a threaded inlet connection sized at 4 inches paired with an NPT outlet connection, with two ports built into the housing for correct fuel routing. Constructed of metal for durability in the marine engine environment, this injector is built to the same fit and function as the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003eThis injector is intended for MCM\/MIE 7.4L MPI L29 applications and cross-references directly to OEM part numbers 802632T and 802632, making it a straightforward swap for boat owners and marine technicians performing fuel system service or troubleshooting a rough-running or misfiring engine.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-33104\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Injector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Needle Valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5 x 4 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.21 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Connection Size:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Connection Type:\u003c\/strong\u003e Threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Connection Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Connection Size:\u003c\/strong\u003e 0.03 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Ports:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282341671\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMCM\/MIE 7.4L MPI L29\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e802632T\u003c\/li\u003e\n\u003cli\u003e802632\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-33104 fuel injector fit?\u003c\/strong\u003e The Sierra 18-33104 fits MCM\/MIE 7.4L MPI L29 marine engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-33104 replace?\u003c\/strong\u003e It cross-references directly to OEM numbers 802632T and 802632, so either of those original part numbers can be replaced with Sierra 18-33104.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-33104 fuel injector made of?\u003c\/strong\u003e It is constructed of metal, matching the durability of the original equipment injector it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-33104 injector?\u003c\/strong\u003e The Sierra 18-33104 measures 5 x 4 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-33104 fuel injector weigh?\u003c\/strong\u003e It weighs 0.21 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of valve does this injector use?\u003c\/strong\u003e The 18-33104 uses a needle valve design for fuel metering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connection type is the inlet on the 18-33104?\u003c\/strong\u003e The inlet is a 4 inch threaded connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of outlet connection does the 18-33104 have?\u003c\/strong\u003e The outlet connection is NPT, sized at 0.03 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many ports does the Sierra 18-33104 have?\u003c\/strong\u003e The injector housing has 2 ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-33104 a direct OEM replacement?\u003c\/strong\u003e Yes, the 18-33104 is a direct replacement for MCM\/MIE 7.4L MPI L29 engines, matching the fit and function of OEM 802632T and 802632.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-33104?\u003c\/strong\u003e The order includes one Sierra 18-33104 fuel injector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-33104?\u003c\/strong\u003e The UPC for the Sierra 18-33104 fuel injector is 808282341671.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988143124699,"sku":"SIE-18-33104","price":294.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-33104__75129.1722372124.500.750.jpg?v=1785187994"},{"product_id":"sierra-18-33211-fuel-pressure-regulator-replaces-mercruiser-860349a1-fits-7-4l-8-2l-mpi-454-502-mag-mpi-engines","title":"Sierra 18-33211 Fuel Pressure Regulator, Replaces 860349A1, Fits MCM\/MIE 7.4L\/LX MPI, 4545 Mag MPI, 502 Mag MPI, MIE 8.2L MPI","description":"\u003cp\u003eThe Sierra 18-33211 Fuel Pressure Regulator is a direct-fit replacement regulator that mounts on the fuel cooler of compatible MerCruiser MPI engines. It maintains fuel delivery within a measuring range of 43.5 to 58 psi and produces an electrical output signal for the engine management system, helping keep fuel pressure steady for consistent engine performance. The regulator is constructed of metal for durability in the marine engine environment and is built to the same specification as the original equipment it replaces, cross-referencing to OEM number 860349A1.\u003c\/p\u003e\u003cp\u003eThis regulator is designed to fit MCM\/MIE 7.4L\/LX MPI, 4545 Mag MPI, 502 Mag MPI, and MIE 8.2L MPI engines, and mounts on the fuel cooler. It is a straightforward swap for boat owners and marine technicians replacing a worn or failing fuel pressure regulator on these MerCruiser MPI powerplants.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-33211\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Location:\u003c\/strong\u003e Fuel Cooler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasuring Range:\u003c\/strong\u003e 43.5 - 58 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Type:\u003c\/strong\u003e electrical signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.11 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282341718\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces (OEM):\u003c\/strong\u003e 860349A1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMCM\/MIE 7.4L\/LX MPI\u003c\/li\u003e\n\u003cli\u003e4545 Mag MPI\u003c\/li\u003e\n\u003cli\u003e502 Mag MPI\u003c\/li\u003e\n\u003cli\u003eMIE 8.2L MPI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e860349A1\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-33211 fuel pressure regulator fit?\u003c\/strong\u003e It fits MCM\/MIE 7.4L\/LX MPI, 4545 Mag MPI, 502 Mag MPI, and MIE 8.2L MPI engines, mounting on the fuel cooler.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does 18-33211 replace?\u003c\/strong\u003e The 18-33211 regulator replaces OEM number 860349A1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does the fuel pressure regulator mount on the engine?\u003c\/strong\u003e The Sierra 18-33211 mounts on the fuel cooler.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuel pressure range does this regulator manage?\u003c\/strong\u003e 43.5 to 58 psi is the measuring range for the Sierra 18-33211 fuel pressure regulator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-33211 regulator electrical or mechanical?\u003c\/strong\u003e It produces an electrical output signal, which the engine management system uses to monitor fuel pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 18-33211 fuel pressure regulator made of?\u003c\/strong\u003e Metal construction is used for the Sierra 18-33211 regulator body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-33211 weigh?\u003c\/strong\u003e This regulator weighs 0.11 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-33211 regulator?\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches are the item dimensions for the Sierra 18-33211.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this regulator work on a 496 Mag or 8.1L Mercruiser?\u003c\/strong\u003e No, the 18-33211 is fitted for MCM\/MIE 7.4L\/LX MPI, 4545 Mag MPI, 502 Mag MPI, and MIE 8.2L MPI; those other engines use a different Sierra part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-33211 a genuine or aftermarket part?\u003c\/strong\u003e The 18-33211 is a Sierra-branded replacement regulator built to cross-reference OEM number 860349A1, rather than a genuine OEM-branded unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part number 18-33211?\u003c\/strong\u003e One Sierra 18-33211 fuel pressure regulator is included per unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-33211 regulator?\u003c\/strong\u003e 808282341718 is the UPC assigned to the Sierra 18-33211 fuel pressure regulator.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988143550683,"sku":"SIE-18-33211","price":76.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-33211__57259.1722502829.500.750.jpg?v=1785188340"},{"product_id":"fuel-pressure-regulator-for-mercruiser-7-4l-454-502-mag-mpi-8-2l-mpi-replaces-860349a1-sierra-18-33207","title":"Sierra Fuel Pressure Regulator 18-33207, Replaces 860349A1, for Mercruiser MCM\/MIE 7.4L\/LX MPI, 4545 Mag MPI, 502 Mag MPI, MIE 8.2L MPI","description":"\u003cp\u003eThe Sierra 18-33207 is a fuel pressure regulator built for Mercruiser MCM\/MIE 7.4L\/LX MPI, 4545 Mag MPI, 502 Mag MPI, and MIE 8.2L MPI engines. It mounts on the fuel cooler and regulates fuel pressure delivered to the multi-port fuel injection system, holding the fuel rail at the pressure the engine's MPI system needs to meter fuel correctly. The regulator body is constructed of metal for durability in the engine bay environment. This part directly replaces OEM number 860349A1, so it installs in place of the original regulator without modification. Sierra manufactures this component to original equipment specification, making it a straightforward, correctly-fitting replacement for a worn or failing fuel pressure regulator on these Mercruiser MPI engines. Because fuel pressure regulation affects air\/fuel ratio, engine performance, and emissions, replacing a weak or leaking regulator with this unit restores proper fuel delivery. It is compact, measuring 0.39 x 0.39 x 0.39 inches, and weighs 0.12 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-33207\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Mercruiser Fuel Pressure Regulators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces (OEM):\u003c\/strong\u003e 860349A1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e MCM\/MIE 7.4L\/LX MPI, 4545 Mag MPI, 502 Mag MPI, MIE 8.2L MPI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Location:\u003c\/strong\u003e Fuel Cooler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.12 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282341695\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercruiser MCM\/MIE 7.4L\/LX MPI\u003c\/li\u003e\n\u003cli\u003eMercruiser 4545 Mag MPI\u003c\/li\u003e\n\u003cli\u003eMercruiser 502 Mag MPI\u003c\/li\u003e\n\u003cli\u003eMercruiser MIE 8.2L MPI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e860349A1\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-33207 fuel pressure regulator fit?\u003c\/strong\u003e The Sierra 18-33207 fits Mercruiser MCM\/MIE 7.4L\/LX MPI, 4545 Mag MPI, 502 Mag MPI, and MIE 8.2L MPI engines, and mounts on the fuel cooler.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does 18-33207 replace?\u003c\/strong\u003e Sierra 18-33207 replaces OEM number 860349A1, so it can be installed as a direct substitute on applicable Mercruiser MPI engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does this fuel pressure regulator mount?\u003c\/strong\u003e It mounts directly on the fuel cooler on the applicable Mercruiser MCM\/MIE MPI engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-33207 made of?\u003c\/strong\u003e This fuel pressure regulator has a metal construction, matching original equipment build quality for these Mercruiser fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-33207 fuel pressure regulator weigh?\u003c\/strong\u003e It weighs 0.12 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sierra 18-33207?\u003c\/strong\u003e The regulator measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-33207 a genuine Mercruiser part or aftermarket?\u003c\/strong\u003e It is a Sierra-manufactured fuel pressure regulator built to original equipment specification, offered as a replacement for OEM number 860349A1 rather than a Mercruiser-branded part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 18-33207 fit the Mercruiser 502 Mag MPI?\u003c\/strong\u003e Yes, the Sierra 18-33207 fuel pressure regulator is listed as fitting the Mercruiser 502 Mag MPI engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this regulator work on a Mercruiser 4545 Mag MPI engine?\u003c\/strong\u003e Yes, Sierra part 18-33207 fits the Mercruiser 4545 Mag MPI, along with the MCM\/MIE 7.4L\/LX MPI and MIE 8.2L MPI engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when you order the 18-33207?\u003c\/strong\u003e The order includes one Sierra 18-33207 fuel pressure regulator, ready to mount on the fuel cooler of the applicable Mercruiser MPI engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace my fuel pressure regulator?\u003c\/strong\u003e A failing fuel pressure regulator can cause incorrect fuel delivery to an MPI engine; the Sierra 18-33207 replaces OEM part 860349A1 to restore correct fuel pressure on applicable Mercruiser engines.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988143976667,"sku":"SIE-18-33207","price":212.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-33207__45627.1722498962.500.750.jpg?v=1785188558"},{"product_id":"sierra-18-35302-fuel-pump-assembly-for-yamaha-f115-lf115-outboards-replaces-68v-13907-03-00","title":"Sierra Fuel Pump Assembly 18-35302 for Yamaha Outboards","description":"\u003cp\u003eThe Sierra Fuel Pump Assembly, part number 18-35302, is a replacement fuel pump built for Yamaha outboard applications. It is constructed from alloy steel for durable service in a marine engine bay, with a threaded inlet connection and an NPT outlet connection sized at 0.5 inches to mate with standard fuel line fittings. This is a universal-fit assembly, making it a straightforward swap for the fuel pump position it serves on compatible Yamaha outboard powerheads.\u003c\/p\u003e\u003cp\u003eAs a complete assembly, the pump ships ready to install in place of a worn or failing OEM unit, restoring proper fuel delivery to the engine. The alloy steel body is sized at 2.2 x 6.35 x 5.7 inches, and the assembly weighs 0.41 pounds, keeping it light and easy to handle during installation. Sierra manufactures this part to OE specification, so buyers can expect the same fit, connection sizing, and function as the original pump it replaces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-35302\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Assy Fuel Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.2 x 6.35 x 5.7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.41 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Connection Type:\u003c\/strong\u003e Threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Connection Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Connection Size:\u003c\/strong\u003e 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282343323\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis fuel pump assembly is designated for Yamaha outboard engines and is a universal-fit part for that application.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are published for this part. Order using Sierra part number 18-35302.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-35302 fuel pump fit?\u003c\/strong\u003e Sierra part number 18-35302 is a fuel pump assembly designated for Yamaha outboard engines, and it is built as a universal-fit part for that application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 18-35302 a complete fuel pump assembly?\u003c\/strong\u003e Yes, 18-35302 is a complete Sierra fuel pump assembly, ready to install in place of a worn factory pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fuel pump body made of?\u003c\/strong\u003e The 18-35302 fuel pump assembly has an alloy steel body construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the inlet and outlet connections?\u003c\/strong\u003e The outlet connection on the Sierra 18-35302 fuel pump is a 0.5 inch NPT fitting, and the inlet connection is a threaded fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fuel pump weigh?\u003c\/strong\u003e The Sierra 18-35302 fuel pump assembly weighs 0.41 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-35302 fuel pump?\u003c\/strong\u003e This fuel pump assembly measures 2.2 x 6.35 x 5.7 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there OEM cross-reference numbers for 18-35302?\u003c\/strong\u003e No OEM cross-reference or replaces numbers are published for this fuel pump; it should be ordered by Sierra part number 18-35302.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pump meet OE specifications?\u003c\/strong\u003e The 18-35302 fuel pump assembly is built to OE specification, matching the fit and function of the original equipment pump it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with 18-35302?\u003c\/strong\u003e The Sierra 18-35302 order includes one complete fuel pump assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-35302 fuel pump new or remanufactured?\u003c\/strong\u003e The Sierra 18-35302 fuel pump assembly is sold as a new part.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988150726875,"sku":"SIE-18-35302","price":71.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-35302__41169.1558184926.500.750.jpg?v=1785188867"},{"product_id":"sierra-18-35437-marine-fuel-pump-for-mercruiser-3-0l-sn-l097000-up-replaces-861676a1-42725a3-gasket-included","title":"Sierra Fuel Pump 18-35437, Replaces 861676A1 and 861676T09, PWC Universal Fit","description":"\u003cp\u003eThe Sierra Fuel Pump 18-35437 is an electric fuel pump built for personal watercraft (PWC) applications. It uses a glass body construction and a flange mounting design, positioned at the rear of the fuel system, to deliver reliable fuel flow to the engine. Its compact dimensions of approximately 0.39 x 0.39 x 0.39 inches allow it to fit into the tight engine bays typical of PWC units.\u003c\/p\u003e\u003cp\u003eThis pump is designed as a universal fit replacement, making it a straightforward swap for worn or failing fuel pumps on compatible PWC models. It directly replaces OEM part numbers 861676A1 and 861676T09, so buyers who have either of those numbers stamped on their original pump can order this part with confidence. The glass-body construction is intended to hold up to continuous exposure to marine fuel and the vibration and moisture common in watercraft engine compartments.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-35437\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Mercruiser Fuel Pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e PWC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Electric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Flange Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto Part Position:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Glass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282343378\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal fit for personal watercraft (PWC) applications\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e861676A1\u003c\/li\u003e\n\u003cli\u003e861676T09\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-35437 fuel pump replace?\u003c\/strong\u003e The Sierra 18-35437 fuel pump directly replaces OEM part numbers 861676A1 and 861676T09, so either number stamped on your existing pump confirms this is the correct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-35437 fuel pump used for?\u003c\/strong\u003e This is an electric fuel pump designed for personal watercraft (PWC) applications, delivering fuel from the tank to the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-35437 fuel pump a universal fit?\u003c\/strong\u003e Yes, the Sierra 18-35437 is built as a universal fit fuel pump for PWC applications rather than being limited to one specific model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-35437 fuel pump made of?\u003c\/strong\u003e The pump body is made of glass, which is designed to withstand continuous exposure to marine fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 18-35437 fuel pump mounted?\u003c\/strong\u003e It uses a flange mounting design and is positioned at the rear of the fuel system in typical installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-35437 fuel pump weigh?\u003c\/strong\u003e The Sierra 18-35437 fuel pump weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sierra 18-35437 fuel pump?\u003c\/strong\u003e The pump measures approximately 0.39 x 0.39 x 0.39 inches, a compact size suited to PWC engine compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-35437 fuel pump electric or mechanical?\u003c\/strong\u003e It operates as an electric fuel pump, not a mechanical, engine-driven unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-35437 fuel pump fit my PWC if my old pump is marked 861676T09?\u003c\/strong\u003e Yes, part number 861676T09 is one of the OEM numbers that the Sierra 18-35437 replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-35437 fuel pump?\u003c\/strong\u003e The UPC for the Sierra 18-35437 fuel pump is 808282343378.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-35437 come as a complete pump or just a repair kit?\u003c\/strong\u003e The Sierra 18-35437 is supplied as a complete fuel pump unit, not a partial repair kit.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988151185627,"sku":"SIE-18-35437","price":167.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-35437__83944.1753707825.500.750.jpg?v=1785188723"},{"product_id":"sierra-18-3587-1-circulating-water-pump-for-marine-engines-replaces-johnson-pump-10-24232-1","title":"Sierra 18-3587-1 Fuel Pump, Flange I.D. #41414, for Ford V-8 302 Marine Engines","description":"\u003cp\u003eThe Sierra 18-3587-1 is a marine fuel pump built for Ford V-8 302 engines. It uses a flange I.D. #41414 mounting configuration to seat properly against the engine block, delivering fuel from the tank to the carburetor or throttle body at the pressure and volume the Ford V-8 302 requires. As a Sierra-branded replacement part, it is manufactured to match the fit and function of the original pump on these engines, making it a straightforward swap when the factory fuel pump wears out, loses pressure, or begins leaking.\u003c\/p\u003e\u003cp\u003eThis pump is identified by the single manufacturer part number 18-3587-1, so ordering is a matter of matching that number rather than cross-shopping multiple part variants. It ships as a complete pump assembly ready to be installed in place of the original unit on applicable Ford V-8 302 marine engines.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-3587-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange I.D.:\u003c\/strong\u003e #41414\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Fitment:\u003c\/strong\u003e Ford V-8 302\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282369651\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord V-8 302\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engine does the Sierra 18-3587-1 fuel pump fit?\u003c\/strong\u003e It is built for Ford V-8 302 marine engines, and the Sierra 18-3587-1 is designed to mount using a flange I.D. #41414 configuration on that engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flange size on the 18-3587-1 fuel pump?\u003c\/strong\u003e The flange I.D. Is listed as #41414, which is the mounting reference used to match this pump to the Ford V-8 302 engine block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-3587-1 fuel pump weigh?\u003c\/strong\u003e It weighs 4.4 pounds as shipped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-3587-1 an OEM or aftermarket fuel pump?\u003c\/strong\u003e It is a Sierra-branded aftermarket replacement fuel pump manufactured to fit Ford V-8 302 marine engines in place of the original pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this fuel pump?\u003c\/strong\u003e The part number is 18-3587-1, which is the number to reference when ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-3587-1?\u003c\/strong\u003e The UPC is 808282369651.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-3587-1 fuel pump fit any Ford V-8 engine?\u003c\/strong\u003e It is specified for the Ford V-8 302, so fitment is tied to that engine rather than Ford V-8 engines generally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-3587-1 replace the original equipment fuel pump?\u003c\/strong\u003e Yes, the 18-3587-1 is designed as a direct replacement fuel pump for Ford V-8 302 marine engines using the same #41414 flange I.D. Mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the 18-3587-1 fuel pump?\u003c\/strong\u003e Sierra manufactures the 18-3587-1 fuel pump.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988154233051,"sku":"SIE-18-3587-1","price":388.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-3587_lg__73140.1558125582.500.750.jpg?v=1785188284"},{"product_id":"sierra-18-36956-carburetor-float-for-mercury-v6-dual-float-carbs-replaces-1395-9267","title":"Sierra Float 18-36956 for Personal Watercraft Carburetors","description":"\u003cp\u003eThe Sierra Float 18-36956 is a replacement carburetor float built for personal watercraft engines. The float is a core carburetor component that rides on the fuel in the float bowl, rising and falling to open and close the inlet needle valve and keep fuel level in the bowl correct. A float that has cracked, absorbed fuel, or lost buoyancy will cause flooding, hard starting, rough idle, or fuel leaking from the carburetor, and replacing it with the correct Sierra part restores proper fuel metering.\u003c\/p\u003e\u003cp\u003eThis is a single float (one item included) designed as a direct replacement for the applicable Sierra carburetor assembly. It is a lightweight, low-cost part but one that is critical to correct carburetor operation, so matching the exact part number to your carburetor is important before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-36956\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Float\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Personal Watercraft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Vehicle Type:\u003c\/strong\u003e Personal Watercraft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Float\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.02 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282341923\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for personal watercraft carburetors using this Sierra float. Confirm your existing float part number matches 18-36956 before ordering.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-36956 float used for?\u003c\/strong\u003e It is a carburetor float that rises and falls with the fuel level inside the float bowl, opening and closing the inlet needle valve to maintain correct fuel level in personal watercraft carburetors fitted with this Sierra part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill part 18-36956 fit any personal watercraft carburetor?\u003c\/strong\u003e This float is designed for personal watercraft carburetors that use Sierra part 18-36956; confirm the float currently in your carburetor carries this same part number before ordering, since floats are carburetor-specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many floats come in one order?\u003c\/strong\u003e One order of Sierra 18-36956 includes a single float, listed as one item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-36956 float weigh?\u003c\/strong\u003e The Sierra float weighs 0.02 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the symptoms of a bad carburetor float?\u003c\/strong\u003e A failing float on a personal watercraft carburetor can cause flooding, hard starting, rough idle, or fuel leaking from the carburetor bowl because it no longer controls fuel level correctly; installing Sierra 18-36956 restores proper float operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 18-36956 a genuine Sierra part or aftermarket?\u003c\/strong\u003e Part 18-36956 is manufactured and sold under the Sierra brand, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if I need to replace the float instead of another carburetor part?\u003c\/strong\u003e If your personal watercraft floods with fuel or runs excessively rich at idle and the needle valve and seat are otherwise in good condition, the float itself, such as Sierra 18-36956, is the likely culprit if it has cracked or absorbed fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the float include the needle valve or gaskets?\u003c\/strong\u003e No, this listing for Sierra 18-36956 includes only the float itself; the needle valve, seat, and gaskets are separate components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the 18-36956 float myself?\u003c\/strong\u003e Replacing a carburetor float typically requires removing the carburetor bowl to access the float and pivot pin; anyone comfortable disassembling a personal watercraft carburetor can install Sierra 18-36956.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra float made of?\u003c\/strong\u003e The dossier for Sierra 18-36956 does not specify the float material.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988161671387,"sku":"SIE-18-36956","price":15.31,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-36956__37433.1558184976.500.750.jpg?v=1785188982"},{"product_id":"sierra-18-57702-crankcase-filter-replaces-oem-876069-fits-volvo-penta-md30a-tmd31a-tamd41a-diesel-engines","title":"Sierra Crankcase Filter 18-57702, Replaces 876069, Fits Volvo Penta MD30A, TMD30A, TAMD30A and More","description":"\u003cp\u003eThe Sierra 18-57702 Crankcase Filter is a stainless steel crankcase ventilation filter engineered as a direct replacement for Volvo Penta marine diesel engines. Crankcase filters manage blow-by gases from the crankcase, helping keep the engine's ventilation system clean and functioning properly, which supports consistent engine performance and helps protect internal components from oil vapor and contaminant buildup over time.\u003c\/p\u003e\u003cp\u003eThis filter is built from stainless steel for corrosion resistance in the marine engine environment, an important quality for a component that operates continuously in a saltwater-adjacent, high-heat setting. It is designed as a direct cross-reference for Volvo Penta OEM part number 876069, making it a straightforward swap for boat owners and marine technicians performing routine maintenance.\u003c\/p\u003e\u003cp\u003eThe Sierra 18-57702 fits a range of Volvo Penta MD, TMD, and TAMD series marine diesel engines, including the MD30A, TMD30A, TAMD30A, MD31A, TMD31A, TAMD31A, MD40A, TMD40A, TMD40B, TAMD40A, TAMD40B, TMD41A, and TAMD41A. Always confirm the engine model against your boat's specific engine designation before ordering to ensure correct fitment. This item is priced per piece.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-57702\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Crankcase Filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.71 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePricing:\u003c\/strong\u003e Priced per piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e 876069\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVolvo Penta MD30A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta TMD30A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta TAMD30A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta MD31A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta TMD31A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta TAMD31A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta MD40A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta TMD40A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta TMD40B\u003c\/li\u003e\n\u003cli\u003eVolvo Penta TAMD40A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta TAMD40B\u003c\/li\u003e\n\u003cli\u003eVolvo Penta TMD41A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta TAMD41A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e876069\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-57702 crankcase filter fit?\u003c\/strong\u003e The Sierra 18-57702 fits Volvo Penta MD30A, TMD30A, TAMD30A, MD31A, TMD31A, TAMD31A, MD40A, TMD40A, TMD40B, TAMD40A, TAMD40B, TMD41A, and TAMD41A marine diesel engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 18-57702 replace Volvo Penta part 876069?\u003c\/strong\u003e Yes, the Sierra 18-57702 crankcase filter is a direct replacement for Volvo Penta OEM part number 876069.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-57702 crankcase filter made from?\u003c\/strong\u003e It is made from stainless steel, chosen for corrosion resistance in the marine engine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-57702 crankcase filter weigh?\u003c\/strong\u003e The Sierra 18-57702 crankcase filter weighs 0.71 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sierra 18-57702 crankcase filter?\u003c\/strong\u003e The filter measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-57702 sold individually or in a package?\u003c\/strong\u003e It is priced per piece; a package quantity is available under a separate part number ending in -9.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a crankcase filter do on a Volvo Penta diesel engine?\u003c\/strong\u003e A crankcase filter manages blow-by gases and vapor from the crankcase ventilation system, helping keep the engine's ventilation path clean and supporting reliable operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-57702 an OEM or aftermarket part?\u003c\/strong\u003e The 18-57702 is an aftermarket crankcase filter manufactured by Sierra as a direct cross-reference to Volvo Penta part 876069.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-57702 fit a Volvo Penta TAMD41A engine?\u003c\/strong\u003e Yes, the TAMD41A is listed among the fitments for the Sierra 18-57702 crankcase filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if I need this crankcase filter for my Volvo Penta engine?\u003c\/strong\u003e Check your engine's model designation against the listed fitments (MD30A, TMD30A, TAMD30A, MD31A, TMD31A, TAMD31A, MD40A, TMD40A, TMD40B, TAMD40A, TAMD40B, TMD41A, TAMD41A) or match against OEM number 876069 before ordering the 18-57702.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988233335003,"sku":"SIE-18-57702","price":46.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-57702__77747.1558185458.500.750.jpg?v=1785188322"},{"product_id":"crankcase-filter-for-volvo-penta-md-tmd-tamd-30a-41a-replaces-876069-sierra-18-5770-2","title":"Sierra Crankcase Filter 18-5770-2, Stainless Steel, Replaces 876069, Fits Volvo Penta MD\/TMD\/TAMD 30-41 Series Diesel Engines","description":"\u003cp\u003eThe Sierra 18-5770-2 is a stainless steel crankcase filter engineered as a direct replacement for Volvo Penta diesel engines. It captures crankcase blow-by contaminants to help protect internal engine components from oil breakdown and buildup, supporting reliable operation of the crankcase ventilation system. The stainless steel construction resists the corrosive marine environment better than painted or plated steel housings, giving the filter a longer service life in salt air and bilge moisture.\u003c\/p\u003e\u003cp\u003eThis filter is a direct cross-reference to Volvo Penta part number 876069 and fits a wide range of Volvo Penta MD, TMD, and TAMD series diesel engines. It is sold individually; a case-pack version is available under a related part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5770-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Crankcase Filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 876069\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Volvo Penta MD30A, TMD30A, TAMD30A, MD31A, TMD31A, TAMD31A, MD40A, TMD40A, TMD40B, TAMD40A, TAMD40B, TMD41A, TAMD41A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Sold individually; add -9 to the part number to order a case pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVolvo Penta MD30A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta TMD30A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta TAMD30A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta MD31A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta TMD31A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta TAMD31A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta MD40A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta TMD40A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta TMD40B\u003c\/li\u003e\n\u003cli\u003eVolvo Penta TAMD40A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta TAMD40B\u003c\/li\u003e\n\u003cli\u003eVolvo Penta TMD41A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta TAMD41A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e876069\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-5770-2 crankcase filter fit?\u003c\/strong\u003e The Sierra 18-5770-2 fits Volvo Penta MD30A, TMD30A, TAMD30A, MD31A, TMD31A, TAMD31A, MD40A, TMD40A, TMD40B, TAMD40A, TAMD40B, TMD41A, and TAMD41A diesel engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5770-2 replace the Volvo Penta 876069 crankcase filter?\u003c\/strong\u003e Yes, Sierra part number 18-5770-2 is a direct replacement for Volvo Penta crankcase filter number 876069.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-5770-2 crankcase filter made from?\u003c\/strong\u003e It is made from stainless steel, chosen for corrosion resistance in the marine engine compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5770-2 weigh?\u003c\/strong\u003e The Sierra 18-5770-2 crankcase filter weighs 1.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5770-2 sold as a single filter or a multi-pack?\u003c\/strong\u003e It is priced and sold per piece. Buyers who need a case-pack quantity should order using the same part number with a -9 suffix added.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill Sierra 18-5770-2 fit any Volvo Penta MD or TMD engine?\u003c\/strong\u003e No, it is confirmed to fit the specific Volvo Penta models MD30A, TMD30A, TAMD30A, MD31A, TMD31A, TAMD31A, MD40A, TMD40A, TMD40B, TAMD40A, TAMD40B, TMD41A, and TAMD41A, not the full MD\/TMD engine range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a crankcase filter like the 18-5770-2 do?\u003c\/strong\u003e A crankcase filter such as the Sierra 18-5770-2 filters crankcase ventilation air to help keep contaminants from blow-by out of the engine's internal components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-5770-2 an OEM or aftermarket part?\u003c\/strong\u003e The 18-5770-2 is an aftermarket Sierra part manufactured as a direct equivalent to Volvo Penta OEM number 876069.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other Volvo Penta part number cross-references to 18-5770-2?\u003c\/strong\u003e Sierra 18-5770-2 cross-references directly to Volvo Penta part number 876069.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if I need the single-piece or case-pack version of this filter?\u003c\/strong\u003e The base Sierra 18-5770-2 part number is priced and supplied per individual filter; adding -9 to the part number orders the case-pack quantity instead.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988299624667,"sku":"SIE-18-5770-2","price":121.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-5770_lg__27114.1558128074.500.750.jpg?v=1785188610"},{"product_id":"sierra-18-6501-rewind-spring-for-johnson-evinrude-outboards-replaces-omc-395460-307573","title":"Sierra 18-6501 Fuel Tank Gasket, Replaces OEM 302557, Package of 2","description":"\u003cp\u003eThe Sierra 18-6501 Fuel Tank Gasket is a direct-fit replacement gasket engineered to replace OEM number 302557. It is sold as a package of 2, so you get a matched pair of gaskets in a single purchase rather than having to order two separate units. The gasket is designed to seat between the fuel tank and its mating surface to maintain a tight seal, helping prevent fuel leaks and vapor loss at the tank connection. Because it is manufactured to the OEM 302557 reference, it is intended to install as a drop-in match without modification for applications that originally used that part number.\u003c\/p\u003e\u003cp\u003eEach package weighs 0.3 pounds, making it a lightweight, low-cost maintenance item that is easy to keep on hand as a spare when servicing a fuel tank. As a Sierra branded part, it carries the manufacturer part number 18-6501 for easy reordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6501\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2 gaskets per package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces (OEM):\u003c\/strong\u003e 302557\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999236487\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits applications that originally used OEM fuel tank gasket 302557.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e302557\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does the Sierra 18-6501 fuel tank gasket replace?\u003c\/strong\u003e It replaces OEM number 302557, and the Sierra 18-6501 is manufactured to match that original part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets are included with part number 18-6501?\u003c\/strong\u003e The 18-6501 is sold as a package of 2 gaskets, not as a single unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy a single Sierra 18-6501 gasket instead of a pair?\u003c\/strong\u003e No, the 18-6501 is only sold as a package of 2 gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-6501 fuel tank gasket weigh?\u003c\/strong\u003e The package weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6501 an OEM or aftermarket part?\u003c\/strong\u003e It is an aftermarket replacement gasket manufactured by Sierra to replace OEM number 302557.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-6501 fuel tank gasket?\u003c\/strong\u003e The UPC is 030999236487.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the 18-6501 gasket fits my boat's fuel tank?\u003c\/strong\u003e Check whether your original gasket or its documentation references OEM number 302557, since the Sierra 18-6501 is built to replace that specific part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-6501 come with installation hardware?\u003c\/strong\u003e The package includes 2 gaskets only; no additional hardware is specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6501 gasket reusable after removal?\u003c\/strong\u003e Gaskets are generally intended for single use once compressed and removed, which is why the 18-6501 is sold as a package of 2 for replacement needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand manufactures part number 18-6501?\u003c\/strong\u003e Sierra manufactures the 18-6501 fuel tank gasket.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988357689563,"sku":"SIE-18-6501","price":15.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-6501_lg__46748.1558129078.500.750.jpg?v=1785188134"},{"product_id":"sierra-18-7004-carburetor-repair-kit-for-mercury-mariner-50-85-hp-outboards-replaces-oem-1395-6200","title":"Sierra 18-7004 Carburetor Kit, Replaces Mercury Marine 1395-6200, for Mercury\/Mariner 50-85 HP Outboards","description":"\u003cp\u003eThe Sierra 18-7004 Carburetor Kit is a rebuild kit designed to restore a carburetor on compatible Mercury and Mariner outboard motors to proper operating condition. Each package includes one complete carburetor kit, giving you the parts needed to overhaul a carburetor rather than replace the entire assembly, which helps keep repair costs down while returning the engine to correct fuel metering and idle performance.\u003c\/p\u003e\u003cp\u003eThis kit is built to meet or exceed the specifications of the original equipment part it replaces, so it restores factory-level function once installed. It is intended for outboard owners and marine technicians performing carburetor maintenance or rebuilds on the applicable Mercury\/Mariner engine range.\u003c\/p\u003e\u003cp\u003eThe 18-7004 is compatible with Mercury\/Mariner 50 HP (3 Cylinder), 55 HP (3 Cylinder), 60 HP (3 Cylinder), 65 HP, 70 HP, 75 HP (4 Cylinder), 80 HP (4 Cylinder), and 85 HP outboard engines. It is a direct equivalent for Mercury Marine part number 1395-6200 and is interchangeable with GLM 40410.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7004\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Carburetor Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Carburetor Kit (1 per package)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.02 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999320582\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury\/Mariner 50 HP (3 Cylinder) outboard\u003c\/li\u003e\n\u003cli\u003eMercury\/Mariner 55 HP (3 Cylinder) outboard\u003c\/li\u003e\n\u003cli\u003eMercury\/Mariner 60 HP (3 Cylinder) outboard\u003c\/li\u003e\n\u003cli\u003eMercury\/Mariner 65 HP outboard\u003c\/li\u003e\n\u003cli\u003eMercury\/Mariner 70 HP outboard\u003c\/li\u003e\n\u003cli\u003eMercury\/Mariner 75 HP (4 Cylinder) outboard\u003c\/li\u003e\n\u003cli\u003eMercury\/Mariner 80 HP (4 Cylinder) outboard\u003c\/li\u003e\n\u003cli\u003eMercury\/Mariner 85 HP outboard\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury Marine 1395-6200\u003c\/li\u003e\n\u003cli\u003eGLM 40410\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-7004 carburetor kit fit?\u003c\/strong\u003e The 18-7004 fits Mercury\/Mariner 50 HP (3 Cylinder), 55 HP (3 Cylinder), 60 HP (3 Cylinder), 65 HP, 70 HP, 75 HP (4 Cylinder), 80 HP (4 Cylinder), and 85 HP outboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the same as Mercury Marine 1395-6200?\u003c\/strong\u003e Yes, the Sierra 18-7004 is a direct equivalent to Mercury Marine part number 1395-6200 and is built to meet or exceed the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-7004 kit cross-reference to any aftermarket numbers?\u003c\/strong\u003e The Sierra 18-7004 is interchangeable with GLM 40410, in addition to matching Mercury Marine 1395-6200.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many carburetor kits come in one package?\u003c\/strong\u003e One carburetor kit is included per package of the Sierra 18-7004.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Sierra 18-7004 kit?\u003c\/strong\u003e The package contains a single carburetor kit intended for rebuilding one carburetor on a compatible Mercury\/Mariner outboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-7004 carburetor kit weigh?\u003c\/strong\u003e The Sierra 18-7004 carburetor kit weighs 0.02 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 18-7004 have?\u003c\/strong\u003e The Sierra 18-7004 carburetor kit has a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit work on a 3-cylinder Mercury outboard?\u003c\/strong\u003e Yes, the 18-7004 is compatible with Mercury\/Mariner 50 HP, 55 HP, and 60 HP engines, all listed as 3-cylinder configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Mercury part or an aftermarket equivalent?\u003c\/strong\u003e The 18-7004 is a Sierra-brand aftermarket carburetor kit engineered to meet or exceed the original Mercury Marine 1395-6200 part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-7004 fit 4-cylinder Mercury outboards?\u003c\/strong\u003e Yes, it is compatible with the 75 HP (4 Cylinder) and 80 HP (4 Cylinder) Mercury\/Mariner outboard engines, along with 65 HP, 70 HP, and 85 HP engines.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988359885019,"sku":"SIE-18-7004","price":3.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7004_lg__81071.1558130071.500.750.jpg?v=1785188861"},{"product_id":"sierra-18-7005-carburetor-kit-for-mercury-outboard-135-225-hp-v135-v150-v175-v200-v225-xr4-replaces-1395-6452","title":"Sierra 18-7005 Carburetor Kit, Replaces Mercury Marine 1395-6452, for Mercury V135\/V150\/V175\/V200\/V225\/XR4 Outboards","description":"\u003cp\u003eThe Sierra 18-7005 Carburetor Kit is built to rebuild the carburetor on a range of Mercury outboard engines, restoring proper fuel metering and idle performance in units that have started to run rough, flood, or lose power at the throttle. It is designed to fit the Mercury V135 (1986-1990), V150 (1979-1991), V150 XR4 MAGII (1988-1989), V175 (1976-1990), V200 (1980-1982), V225 (1980-1981), V225 (2.4L) (1981 \u0026amp; Up), and XR4 (1988-1990) HP outboard engines, and it is built to fit a wide range of WH-series carburetor bodies used across those engines, including WH-1, WH-3A, WH-4, WH-5, WH-7, WH-7A, WH-9, WH-11, WH-12, WH-13, WH-15, WH-17, WH-17R, WH-20, WH-22, WH-26, WH-28, WH-29, WH-30, WH-31, WH-32, WH-33, WH-34, WH-35, WH-38, WH-39, WH-40, WH-41, WH-41A, WH-46, and WH-48. Because one kit spans this many carburetor bodies and engine years, check your engine model and carburetor number against the fitment list below before ordering to make sure it matches your specific unit. The kit is packaged as a single carburetor kit unit and is cross-referenced to Mallory, GLM, and Mercury Marine part numbers for buyers who are matching an existing interchange number rather than a Sierra number. As with any carburetor rebuild kit, confirm the exact carburetor model stamped on your unit before installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7005\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Carburetor Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1.0 Count\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Weight:\u003c\/strong\u003e 0.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Uses For Product:\u003c\/strong\u003e Engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e Mercury Marine 1395-6452\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999320599\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00030999320599\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Carburetor Models:\u003c\/strong\u003e WH-1, WH-3A, WH-4, WH-5, WH-7, WH-7A, WH-9, WH-11, WH-12, WH-13, WH-15, WH-17, WH-17R, WH-20, WH-22, WH-26, WH-28, WH-29, WH-30, WH-31, WH-32, WH-33, WH-34, WH-35, WH-38, WH-39, WH-40, WH-41, WH-41A, WH-46, WH-48\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury V135 (1986-1990)\u003c\/li\u003e\n\u003cli\u003eMercury V150 (1979-1991)\u003c\/li\u003e\n\u003cli\u003eMercury V150 XR4 MAGII (1988-1989)\u003c\/li\u003e\n\u003cli\u003eMercury V175 (1976-1990)\u003c\/li\u003e\n\u003cli\u003eMercury V200 (1980-1982)\u003c\/li\u003e\n\u003cli\u003eMercury V225 (1980-1981)\u003c\/li\u003e\n\u003cli\u003eMercury V225 (2.4L) (1981 \u0026amp; Up)\u003c\/li\u003e\n\u003cli\u003eMercury XR4 (1988-1990)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMallory 9-37300\u003c\/li\u003e\n\u003cli\u003eGLM 40420\u003c\/li\u003e\n\u003cli\u003eMercury Marine 1395-6026\u003c\/li\u003e\n\u003cli\u003eMercury Marine 1395-6452\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-7005 fit my Mercury V150 outboard?\u003c\/strong\u003e Yes, the Sierra 18-7005 Carburetor Kit is designed to fit the Mercury V150 (1979-1991), as well as V135 (1986-1990), V150 XR4 MAGII (1988-1989), V175 (1976-1990), V200 (1980-1982), V225 (1980-1981), V225 (2.4L) (1981 \u0026amp; Up), and XR4 (1988-1990) outboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat carburetor models does the 18-7005 kit cover?\u003c\/strong\u003e The kit is built to fit WH-series carburetor bodies including WH-1, WH-3A, WH-4, WH-5, WH-7, WH-7A, WH-9, WH-11, WH-12, WH-13, WH-15, WH-17, WH-17R, WH-20, WH-22, WH-26, WH-28, WH-29, WH-30, WH-31, WH-32, WH-33, WH-34, WH-35, WH-38, WH-39, WH-40, WH-41, WH-41A, WH-46, and WH-48.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the same as Mercury Marine 1395-6452?\u003c\/strong\u003e The Sierra 18-7005 Carburetor Kit is interchangeable with Mercury Marine 1395-6452, along with Mercury Marine 1395-6026, Mallory 9-37300, and GLM 40420.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the carburetor kit weigh?\u003c\/strong\u003e The Sierra 18-7005 Carburetor Kit weighs 0.03 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the 18-7005 kit?\u003c\/strong\u003e The kit is packaged as one Carburetor Kit unit, sold as a single count (1.0 Count).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this kit if I only have a Mallory or GLM cross-reference number?\u003c\/strong\u003e Yes, the 18-7005 kit cross-references to Mallory 9-37300 and GLM 40420, so either of those numbers points to the same Sierra 18-7005 Carburetor Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-7005 fit any Mercury outboard, or do I need to check the model first?\u003c\/strong\u003e You should check your specific engine model first: the 18-7005 fits a defined list of Mercury engines (V135 1986-1990, V150 1979-1991, V150 XR4 MAGII 1988-1989, V175 1976-1990, V200 1980-1982, V225 1980-1981, V225 2.4L 1981 \u0026amp; Up, and XR4 1988-1990), not every Mercury outboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the carburetor kit have?\u003c\/strong\u003e Components in the Sierra 18-7005 Carburetor Kit have a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the V225 (2.4L) engine use the same 18-7005 kit as the standard V225?\u003c\/strong\u003e Yes, both the V225 (1980-1981) and the V225 (2.4L) (1981 \u0026amp; Up) are listed as fitting the Sierra 18-7005 Carburetor Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuel type is this carburetor kit designed for?\u003c\/strong\u003e The Sierra 18-7005 Carburetor Kit is designed for gasoline-fueled outboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-7005 an OEM Mercury part or an aftermarket replacement?\u003c\/strong\u003e The Sierra 18-7005 is a Sierra-brand replacement kit that is cross-referenced as equivalent to OEM Mercury Marine part numbers 1395-6026 and 1395-6452.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my carburetor is a WH-series model compatible with the 18-7005?\u003c\/strong\u003e Check the carburetor body for a WH- stamped model number; the Sierra 18-7005 Carburetor Kit is built to fit WH-1 through WH-48 models as listed in its compatibility range, such as WH-7, WH-17, WH-30, and WH-41.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988359917787,"sku":"SIE-18-7005","price":7.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7005_lg__09648.1558130110.500.750.jpg?v=1785188058"},{"product_id":"carburetor-kit-for-mercury-wm-wmk-carburetors-replaces-1399-5135-1399-5198-sierra-18-7007-medium","title":"Sierra 18-7007 Medium Carburetor Kit, Universal Fit, Replaces Mercury Marine 1399-5198 and 1399-5135","description":"\u003cp\u003eThe Sierra 18-7007 is a medium carburetor kit built to restore a carburetor to reliable running condition during a rebuild. It is designed as a universal fit part, making it a practical choice when servicing outboard carburetors that call for this rebuild kit rather than a full carburetor replacement. The kit's components are machined, supporting a precise fit during reassembly and helping the carburetor return to proper operating performance after wear or fouling.\u003c\/p\u003e\u003cp\u003eThis kit is intended for technicians and DIY boat owners performing carburetor maintenance who need a dependable, correctly sized set of rebuild parts rather than sourcing individual pieces separately. Because it is cataloged as a universal fit item, it is suited to a range of carburetor rebuild jobs where the medium kit size is the correct match. Sierra lists this part under Mercury Marine cross-reference numbers, making it straightforward to identify as the correct replacement kit when an OEM number is already known.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7007\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Carburetor Kit, Medium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 1399-5198, MERCURY MARINE 1399-5135\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282259518\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Mercury Outboard Parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal fit carburetor kit; specific engine models are not designated.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1399-5198\u003c\/li\u003e\n\u003cli\u003eMERCURY MARINE 1399-5135\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-7007 carburetor kit used for?\u003c\/strong\u003e It is a medium-size carburetor rebuild kit used to restore a carburetor's function during service, supplying the components needed to freshen up the carburetor rather than replacing the whole unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-7007 kit fit my outboard's carburetor?\u003c\/strong\u003e The 18-7007 is cataloged as a universal fit kit, meaning it is designed to fit carburetors that call for the medium kit size rather than one specific listed engine model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the Sierra 18-7007 replace?\u003c\/strong\u003e This kit corresponds to OEM number 1399-5198 and Mercury Marine number 1399-5135, so either of those numbers can be used to confirm this is the correct kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-7007 the same as the Mercury Marine 1399-5135 kit?\u003c\/strong\u003e Yes, 1399-5135 is the Mercury Marine equivalent number for this kit, and 1399-5198 is also listed as an equivalent OEM number for the same part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-7007 carburetor kit weigh?\u003c\/strong\u003e The kit weighs 0.03 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sierra 18-7007 kit?\u003c\/strong\u003e The kit measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-7007 a genuine Sierra part or an aftermarket copy?\u003c\/strong\u003e It is a Sierra-branded carburetor kit, part number 18-7007, cataloged as an active, non-discontinued item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish do the components in the 18-7007 kit have?\u003c\/strong\u003e The components in this kit have a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 18-7007 kit on any Mercury Marine carburetor?\u003c\/strong\u003e It is listed as universal fit rather than tied to a specific Mercury Marine model, so it should be matched against the carburetor's required kit size or the OEM numbers 1399-5198 and 1399-5135 rather than a specific engine year or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Sierra 18-7007 carburetor kit?\u003c\/strong\u003e It is sold as a complete medium carburetor kit intended for a single carburetor rebuild.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose the Sierra 18-7007 over buying individual carburetor parts?\u003c\/strong\u003e Buying the complete 18-7007 kit ensures all the rebuild components needed for one carburetor are matched and included together, rather than needing to source each part separately.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988359950555,"sku":"SIE-18-7007","price":10.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7007_lg__18238.1558130233.500.750.jpg?v=1785188320"},{"product_id":"carburetor-kit-for-volvo-penta-solex-44pa1-down-draft-carburetor-replaces-841836-0-856471-fits-aq115-thru-aq171-and-aq170-bb170-i-o-sierra-18-7000","title":"Sierra 18-7000 Carburetor Kit for Volvo Penta Solex 44PA1 Down Draft Carburetor","description":"\u003cp\u003eThe Sierra 18-7000 Carburetor Kit is built for rebuilding the Solex 44PA1 down draft carburetor used on Volvo Penta sterndrive engines. This kit restores carburetor performance by replacing the wear-prone internal components that degrade with fuel exposure and heat cycling over time, helping resolve rough idle, flooding, and inconsistent fuel metering caused by worn gaskets, seals, and other internal carburetor parts. The kit does not include metering rods, so those should be inspected separately and sourced if replacement is needed. It is designed to fit Volvo Penta 4 Cylinder I\/O engine models AQ115A, AQ115B, AQ125A, AQ125B, AQ130C, AQ130D, AQ131A, AQ131B, AQ131C, AQ131D, AQ145A, AQ145B, AQ151A, AQ151B, AQ151C, AQ171A, AQ171C, BB115B, BB115C, and BB145A, as well as 6 Cylinder I\/O engine models AQ170A, AQ170B, AQ170C, BB170A, BB170B, and BB170C. This carburetor kit is interchangeable with GLM 76101, Mallory 9-37600, Solex 44PA1, and Volvo Penta 841292, 841836-0, 856471, and 856472. Each Sierra replacement part is built to meet or exceed the specifications of the original equipment part it replaces, giving boat owners a dependable option for restoring carburetor function without sourcing a full replacement carburetor.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Carburetor Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned For:\u003c\/strong\u003e Volvo Penta Solex 44PA1 Down Draft Carburetor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Metering Rods:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Volvo Penta Sterndrive Parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.24 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999320551\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVolvo Penta 4 Cylinder I\/O: AQ115A, AQ115B, AQ125A, AQ125B, AQ130C, AQ130D, AQ131A, AQ131B, AQ131C, AQ131D, AQ145A, AQ145B, AQ151A, AQ151B, AQ151C, AQ171A, AQ171C, BB115B, BB115C, BB145A\u003c\/li\u003e\n\u003cli\u003eVolvo Penta 6 Cylinder I\/O: AQ170A, AQ170B, AQ170C, BB170A, BB170B, BB170C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGLM 76101\u003c\/li\u003e\n\u003cli\u003eMallory 9-37600\u003c\/li\u003e\n\u003cli\u003eSolex 44PA1\u003c\/li\u003e\n\u003cli\u003eVolvo Penta 841292\u003c\/li\u003e\n\u003cli\u003eVolvo Penta 841836-0\u003c\/li\u003e\n\u003cli\u003eVolvo Penta 856471\u003c\/li\u003e\n\u003cli\u003eVolvo Penta 856472\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-7000 Carburetor Kit used for?\u003c\/strong\u003e It is a rebuild kit for the Solex 44PA1 down draft carburetor fitted to certain Volvo Penta sterndrive engines, replacing the internal components that wear out with normal fuel exposure and use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-7000 kit include metering rods?\u003c\/strong\u003e No, the Sierra 18-7000 Carburetor Kit does not include metering rods, so those must be inspected and sourced separately if they need replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Volvo Penta engines does the 18-7000 carburetor kit fit?\u003c\/strong\u003e It fits Volvo Penta 4 Cylinder I\/O models AQ115A, AQ115B, AQ125A, AQ125B, AQ130C, AQ130D, AQ131A, AQ131B, AQ131C, AQ131D, AQ145A, AQ145B, AQ151A, AQ151B, AQ151C, AQ171A, AQ171C, BB115B, BB115C, and BB145A, plus 6 Cylinder I\/O models AQ170A, AQ170B, AQ170C, BB170A, BB170B, and BB170C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-7000 the same as a Volvo Penta OEM carburetor kit?\u003c\/strong\u003e Yes, part number 18-7000 is interchangeable with Volvo Penta OEM numbers 841292, 841836-0, 856471, and 856472, as well as GLM 76101 and Mallory 9-37600.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat carburetor model does this kit rebuild?\u003c\/strong\u003e This kit is designed for the Solex 44PA1 down draft carburetor used on Volvo Penta I\/O engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-7000 carburetor kit weigh?\u003c\/strong\u003e The Sierra 18-7000 Carburetor Kit weighs 0.24 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an OEM or aftermarket carburetor kit?\u003c\/strong\u003e The 18-7000 is a Sierra aftermarket replacement kit engineered to meet or exceed the specifications of the original Volvo Penta equipment it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-7000 kit work if my carburetor has worn metering rods?\u003c\/strong\u003e The kit itself does not include metering rods, so if the metering rods on your Solex 44PA1 carburetor are worn, those will need to be sourced separately in addition to the 18-7000 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies to the Sierra 18-7000 kit?\u003c\/strong\u003e The 18-7000 Carburetor Kit is covered under a limited warranty as part of Sierra's standard parts warranty coverage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-7000 kit be cross-referenced to a Mallory part number?\u003c\/strong\u003e Yes, the Sierra 18-7000 Carburetor Kit is interchangeable with Mallory 9-37600.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988359983323,"sku":"SIE-18-7000","price":95.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7000_lg__50813.1558129861.500.750.jpg?v=1785189011"},{"product_id":"sierra-18-7002-carburetor-kit-for-yamaha-115-225-hp-outboards-replaces-oem-6e5-w0093-06-00-rebuilds-2-carburetors","title":"Sierra 18-7002 Carburetor Rebuild Kit for Yamaha 115-225 HP Outboards, Replaces 6E5-W0093-06-00","description":"\u003cp\u003eThe Sierra 18-7002 Carburetor Rebuild Kit supplies the components needed to rebuild two carburetors on compatible Yamaha outboard engines. Rather than sourcing individual gaskets, seats, and small hardware separately, this kit bundles everything required to restore carburetor function in one package, making it a practical option for outboard owners performing a carburetor service or troubleshooting fuel delivery issues on their engine.\u003c\/p\u003e\u003cp\u003eThis kit is built to serve as a direct replacement for the Yamaha carburetor kit 6E5-W0093-06-00, so it is intended to restore the carburetor to its original operating specification rather than modify performance. It is designed for outboard motors within the Yamaha fuel systems line and covers a range of horsepower ratings and model years as listed below, so confirming your engine's horsepower and model year against the fitment list is the best way to verify this is the correct kit before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Components to rebuild 2 carburetors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces (OEM):\u003c\/strong\u003e 6E5-W0093-06-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Brand Compatibility:\u003c\/strong\u003e Yamaha\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 115 HP (1986-88, 1992-93, 1995); 130 HP (1988, 1992-93, 1995); 150 HP (1986-87, 1992-95); 175 HP (1986-87, 1992-95); 200 HP (1986-87, 1992-95); 225 HP (1992-93)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282264987\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYamaha 115 HP outboards (1986-88, 1992-93, 1995)\u003c\/li\u003e\n\u003cli\u003eYamaha 130 HP outboards (1988, 1992-93, 1995)\u003c\/li\u003e\n\u003cli\u003eYamaha 150 HP outboards (1986-87, 1992-95)\u003c\/li\u003e\n\u003cli\u003eYamaha 175 HP outboards (1986-87, 1992-95)\u003c\/li\u003e\n\u003cli\u003eYamaha 200 HP outboards (1986-87, 1992-95)\u003c\/li\u003e\n\u003cli\u003eYamaha 225 HP outboards (1992-93)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e6E5-W0093-06-00\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-7002 carburetor kit include?\u003c\/strong\u003e The kit contains enough components to rebuild 2 carburetors, making it suited to Yamaha outboards that run twin carburetors needing a full rebuild in one service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Yamaha outboards does the 18-7002 fit?\u003c\/strong\u003e It fits Yamaha 115 HP (1986-88, 1992-93, 1995), 130 HP (1988, 1992-93, 1995), 150 HP and 175 HP (1986-87, 1992-95), 200 HP (1986-87, 1992-95), and 225 HP (1992-93) outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does the 18-7002 replace?\u003c\/strong\u003e This Sierra kit replaces Yamaha carburetor kit 6E5-W0093-06-00, so it can be ordered in place of that OEM kit for a rebuild.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-7002 carburetor kit weigh?\u003c\/strong\u003e The kit weighs 0.1 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-7002 kit enough to rebuild both carburetors on my engine?\u003c\/strong\u003e Yes, one 18-7002 kit contains enough components to rebuild 2 carburetors, so a single kit covers a twin-carburetor Yamaha outboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit work on a Yamaha 150 HP outboard from any model year?\u003c\/strong\u003e The 18-7002 kit's listed fitment for 150 HP does not specify a year range separate from the 175 HP grouping (1986-87, 1992-95), so confirm your engine's exact model year and carburetor part number 6E5-W0093-06-00 match before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-7002 fit a Yamaha 225 HP outboard?\u003c\/strong\u003e Yes, it is listed as fitting the Yamaha 225 HP outboard for model years 1992-93.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-7002 a genuine Yamaha part or aftermarket?\u003c\/strong\u003e It is a Sierra-branded rebuild kit engineered as a replacement for Yamaha carburetor kit 6E5-W0093-06-00, not an OEM Yamaha part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 18-7002 kit on a Yamaha 130 HP outboard?\u003c\/strong\u003e Yes, fitment includes the Yamaha 130 HP outboard for model years 1988, 1992-93, and 1995.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuel type is the 18-7002 carburetor kit designed for?\u003c\/strong\u003e The Sierra 18-7002 is designed for gasoline-fueled Yamaha outboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-7002 kit cover the Yamaha 200 HP outboard?\u003c\/strong\u003e Yes, the kit's fitment list includes the Yamaha 200 HP outboard for model years 1986-87 and 1992-95.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988360048859,"sku":"SIE-18-7002","price":34.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7002_lg__01833.1558129959.500.750.jpg?v=1785188474"},{"product_id":"carburetor-rebuild-kit-for-tillotson-aj-co-ka-kb-kc-kd-wb-series-carburetors-sierra-18-7013","title":"Sierra 18-7013 Carburetor Kit for Tillotson AJ, CO, KA, KB, KC, KD \u0026 WB Series Carburetors","description":"\u003cp\u003eThe Sierra 18-7013 Carburetor Kit is a complete rebuild kit designed for use in Tillotson AJ, CO, KA, KB, KC, KD, and WB Series carburetors. It is built to restore proper fuel metering and sealing in these carburetors, replacing the gaskets, filter, and needle and seat assembly that wear out over normal use and cause rough idling, flooding, or fuel leaks.\u003c\/p\u003e\u003cp\u003eThe kit includes a full set of application-specific gaskets along with a fuel filter and a needle and seat assembly, giving a rebuild everything needed in one package rather than sourcing each gasket individually. Components include a carburetor flange gasket (18-2572), a second carburetor flange gasket (18-2571), a fuel filter (18-7832), a carburetor mounting gasket (18-2802), a strainer cover gasket (18-2570), a carburetor bowl gasket (18-2575), a filter cover gasket (18-2569), a strainer cover screw gasket (18-2568), an additional carburetor flange gasket, and a needle and seat assembly (18-7057).\u003c\/p\u003e\u003cp\u003eThis kit is intended for AJ-53A, AJ-53AT, AJ-54A, AJ-54AT, AJ-55AO, and AJ-55AT carburetors, as well as KA, KB, KC, and KD series carburetors. Each Sierra product meets or exceeds the original equipment part it replaces, and buyers should check their carburetor model number before ordering to confirm a correct fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7013\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Carburetor Rebuild Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Carburetor Series:\u003c\/strong\u003e Tillotson AJ, CO, KA, KB, KC, KD, WB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e 2x carburetor flange gasket, 1x additional carburetor flange gasket, carburetor mounting gasket, strainer cover gasket, carburetor bowl gasket, filter cover gasket, strainer cover screw gasket, fuel filter (18-7832), needle and seat assembly (18-7057)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999320650\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTillotson AJ-53A, AJ-53AT, AJ-54A, AJ-54AT, AJ-55AO, and AJ-55AT carburetors\u003c\/li\u003e\n\u003cli\u003eTillotson KA, KB, KC, and KD series carburetors\u003c\/li\u003e\n\u003cli\u003eTillotson CO and WB series carburetors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat carburetors does the Sierra 18-7013 kit fit?\u003c\/strong\u003e The Sierra 18-7013 Carburetor Kit is designed for Tillotson AJ, CO, KA, KB, KC, KD, and WB Series carburetors, including AJ-53A, AJ-53AT, AJ-54A, AJ-54AT, AJ-55AO, and AJ-55AT models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the 18-7013 carburetor kit?\u003c\/strong\u003e This kit contains two carburetor flange gaskets plus an additional carburetor flange gasket, a carburetor mounting gasket, a strainer cover gasket, a carburetor bowl gasket, a filter cover gasket, a strainer cover screw gasket, an 18-7832 fuel filter, and an 18-7057 needle and seat assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include a needle and seat assembly?\u003c\/strong\u003e Yes, the 18-7013 kit includes an 18-7057 needle and seat assembly along with the full set of gaskets and a fuel filter needed for a carburetor rebuild.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-7013 kit weigh?\u003c\/strong\u003e The 18-7013 Carburetor Kit weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part or aftermarket?\u003c\/strong\u003e The 18-7013 is a genuine Sierra part, manufactured to meet or exceed the specifications of the original equipment carburetor components it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit fit AJ-55AO and AJ-55AT carburetors?\u003c\/strong\u003e Yes, the 18-7013 kit is listed for AJ-55AO and AJ-55AT carburetors in addition to the AJ-53 and AJ-54 series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit work on KA, KB, KC, and KD series carburetors?\u003c\/strong\u003e Yes, the Sierra 18-7013 Carburetor Kit is designed for use in KA, KB, KC, and KD Series carburetors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies to this carburetor kit?\u003c\/strong\u003e Sierra 18-7013 is covered under Sierra's standard customer satisfaction warranty, the same warranty coverage applied across the Sierra parts line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm my carburetor uses the 18-7013 kit before ordering?\u003c\/strong\u003e Check the model number stamped on your carburetor against the supported list (AJ-53A, AJ-53AT, AJ-54A, AJ-54AT, AJ-55AO, AJ-55AT, plus KA\/KB\/KC\/KD and CO\/WB series) before ordering the 18-7013 kit, since carburetor kits are model-specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-7013 carburetor kit packaging?\u003c\/strong\u003e The 18-7013 kit measures 0.39 x 0.39 x 0.39 inches as packaged.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988360179931,"sku":"SIE-18-7013","price":23.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7013_lg__18178.1558130400.500.750.jpg?v=1785188395"},{"product_id":"sierra-18-7024-carburetor-repair-kit-for-johnson-evinrude-5-40-hp-outboards-replaces-omc-382053-382052-385356-439075","title":"Sierra Carburetor Kit 18-7024 for Johnson\/Evinrude 5-40 HP Outboards, Replaces 382052 382053 385356","description":"\u003cp\u003eThe Sierra 18-7024 Carburetor Kit is an OEM-quality rebuild kit engineered for Johnson and Evinrude outboard engines rated 5 HP, 6 HP, 25 HP, 30 HP, 35 HP, and 40 HP. Each kit is built to precise fit, form, and function specifications so the repaired carburetor performs to the same standard as the original equipment part it replaces. This is a single carburetor kit per package, intended for boat owners and marine technicians rebuilding a worn or malfunctioning carburetor rather than replacing the entire assembly.\u003c\/p\u003e\u003cp\u003eCarburetor kits like the 18-7024 typically restore proper fuel metering and idle performance by replacing the internal wear components that degrade with age, ethanol-blended fuel exposure, and normal engine hours. Because Sierra manufactures each kit to match the specific application, it is designed as a precise, direct-fit rebuild solution for the listed Johnson\/Evinrude outboard engines rather than a universal or generic kit.\u003c\/p\u003e\u003cp\u003eThe 18-7024 is cross-referenced to multiple OEM and aftermarket part numbers, making it easy to identify as the correct replacement kit regardless of which reference number appears on your existing parts documentation or old packaging.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7024\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Carburetor Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnits Included:\u003c\/strong\u003e 1 carburetor kit per package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.18 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999320759\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e 382052, 382053, 385356, 439075\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAftermarket Cross-Reference:\u003c\/strong\u003e Mallory 9-37104, GLM 40530\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eJohnson\/Evinrude outboard engines: 5 HP, 6 HP, 25 HP, 30 HP, 35 HP, 40 HP\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e382052\u003c\/li\u003e\n\u003cli\u003e382053\u003c\/li\u003e\n\u003cli\u003e385356\u003c\/li\u003e\n\u003cli\u003e439075\u003c\/li\u003e\n\u003cli\u003eMallory 9-37104\u003c\/li\u003e\n\u003cli\u003eGLM 40530\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-7024 carburetor kit fit?\u003c\/strong\u003e The 18-7024 is designed for Johnson and Evinrude outboard engines rated 5 HP, 6 HP, 25 HP, 30 HP, 35 HP, and 40 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-7024 kit the same as OEM part 382053?\u003c\/strong\u003e Yes, the Sierra 18-7024 carburetor kit cross-references to OEM numbers 382052, 382053, and 385356, so it is a direct equivalent to those original Johnson\/Evinrude part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 18-7024 replace Johnson\/Evinrude part 439075?\u003c\/strong\u003e Yes, part number 439075 is one of the OEM numbers the Sierra 18-7024 carburetor kit is built to replace.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many carburetors does one 18-7024 kit rebuild?\u003c\/strong\u003e Each package contains one carburetor kit, sized to rebuild a single carburetor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-7024 carburetor kit weigh?\u003c\/strong\u003e It weighs 0.18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part or a generic aftermarket kit?\u003c\/strong\u003e The 18-7024 is manufactured by Sierra to OEM-quality standards, engineered for precise fit, form, and function on its specified Johnson\/Evinrude applications rather than being a generic universal kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-7024 kit work if my old part is stamped Mallory 9-37104?\u003c\/strong\u003e Yes, the Sierra 18-7024 carburetor kit is cross-referenced to Mallory 9-37104, so it is an equivalent replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the exterior finish of the 18-7024 carburetor kit components?\u003c\/strong\u003e The kit has a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 18-7024 kit on a Johnson\/Evinrude engine other than the listed horsepower ratings?\u003c\/strong\u003e The 18-7024 is engineered specifically for 5 HP, 6 HP, 25 HP, 30 HP, 35 HP, and 40 HP Johnson\/Evinrude outboards, so fitment outside those ratings is not confirmed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the GLM 40530 number match the Sierra 18-7024 kit?\u003c\/strong\u003e Yes, GLM 40530 is listed as an interchangeable cross-reference for the Sierra 18-7024 carburetor kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sierra 18-7024 carburetor kit?\u003c\/strong\u003e The package includes one complete carburetor kit for rebuilding a single carburetor on the listed Johnson\/Evinrude outboard engines.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988360212699,"sku":"SIE-18-7024","price":27.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7024_lg__34545.1558130807.500.750.jpg?v=1785188634"},{"product_id":"carburetor-kit-18-7021-for-mercury-wm-wmk-series-carburetors","title":"Sierra Carburetor Kit 18-7021 for WM and WMK Mercury Outboard Carburetors","description":"\u003cp\u003eThe Sierra 18-7021 Carburetor Kit is a rebuild kit engineered for WM and WMK series carburetors, including the WMK-2, WMK-3, WMK-4, WMK-5, WMK-7, and WMK-8 models. It is designed to restore carburetor performance on applicable Mercury outboard engines by replacing the wear-prone internal components that govern fuel metering and air-fuel mixture control. Components in the kit are precision-built, and Sierra recommends following the carburetor manufacturer's specifications and guidelines during installation to ensure a proper fit and correct operation after the rebuild.\u003c\/p\u003e\u003cp\u003eThis kit is intended for technicians and boat owners performing routine carburetor maintenance or troubleshooting rough idle, flooding, or poor fuel metering caused by worn internal carburetor parts. Every Sierra part, including this kit, is backed by Sierra's industry-leading customer satisfaction warranty, giving buyers confidence in fit and durability when servicing WM and WMK carburetors.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7021\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Mercury Outboard Carburetors \u0026amp; Kits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Carburetors:\u003c\/strong\u003e WM, WMK Carburetors (WMK-2, WMK-3, WMK-4, WMK-5, WMK-7, WMK-8)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 0.75 x 6 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999320728\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWM Carburetors\u003c\/li\u003e\n\u003cli\u003eWMK-2 Carburetors\u003c\/li\u003e\n\u003cli\u003eWMK-3 Carburetors\u003c\/li\u003e\n\u003cli\u003eWMK-4 Carburetors\u003c\/li\u003e\n\u003cli\u003eWMK-5 Carburetors\u003c\/li\u003e\n\u003cli\u003eWMK-7 Carburetors\u003c\/li\u003e\n\u003cli\u003eWMK-8 Carburetors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat carburetors does the Sierra 18-7021 kit fit?\u003c\/strong\u003e The Sierra 18-7021 Carburetor Kit fits WM and WMK series carburetors, specifically the WMK-2, WMK-3, WMK-4, WMK-5, WMK-7, and WMK-8 models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-7021 a complete carburetor or a rebuild kit?\u003c\/strong\u003e It is a rebuild kit, not a complete carburetor. The Sierra 18-7021 supplies the internal components needed to rebuild an existing WM or WMK carburetor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-7021 carburetor kit?\u003c\/strong\u003e The kit measures 0.75 x 6 x 6 inches and weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-7021 kit come with an OEM warranty?\u003c\/strong\u003e Yes, the Sierra 18-7021 is covered under Sierra's industry-leading customer satisfaction warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my carburetor is a WM or WMK model?\u003c\/strong\u003e Check the carburetor's stamped model identifier for a WM or WMK designation; the Sierra 18-7021 kit is built specifically for WM and WMK-2, WMK-3, WMK-4, WMK-5, WMK-7, and WMK-8 carburetors, so confirming the model number before ordering ensures correct fitment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish do the components in the 18-7021 kit have?\u003c\/strong\u003e The components included in the Sierra 18-7021 Carburetor Kit have a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit fix a rough idle or flooding issue?\u003c\/strong\u003e Rebuilding a WM or WMK carburetor with the Sierra 18-7021 kit replaces worn internal components that commonly cause rough idle, flooding, or poor fuel metering, provided the carburetor body itself is not damaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-7021 an authentic Sierra part or aftermarket?\u003c\/strong\u003e The 18-7021 is a genuine Sierra part, manufactured under the Sierra brand for WM and WMK carburetor applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any special tools to install the 18-7021 kit?\u003c\/strong\u003e Sierra recommends following the carburetor manufacturer's specifications and guidelines for proper fit and installation of the 18-7021 kit; standard carburetor rebuild tools are typically used for this type of service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-7021 Carburetor Kit?\u003c\/strong\u003e The UPC for the Sierra 18-7021 Carburetor Kit is 030999320728.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988360245467,"sku":"SIE-18-7021","price":20.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7021_lg__76038.1558130610.500.750.jpg?v=1785189049"},{"product_id":"sierra-18-7042-carburetor-rebuild-kit-for-evinrude-omc-outboards-without-float-replaces-oem-392061-398729-396701","title":"Sierra Carburetor Kit 18-7042, Replaces OMC 392061, 396701, 398729","description":"\u003cp\u003eThe Sierra 18-7042 Carburetor Kit is a gasoline-application rebuild kit designed to restore carburetor performance on applicable outboard engines. This kit is built to replace worn or degraded internal carburetor components, helping resolve common issues such as rough idle, poor fuel atomization, and inconsistent throttle response caused by aged gaskets, seals, and other wear parts inside the carburetor body. The kit carries a machined exterior finish and is packaged as a single complete unit (1 count) to simplify ordering for a single carburetor rebuild.\u003c\/p\u003e\u003cp\u003eSierra sources this kit as a direct cross-reference to OMC carburetor part numbers 392061, 396701, and 398729, making it a straightforward replacement option for boat owners and marine technicians working on engines that originally used those OMC carburetor assemblies. The kit is backed by a limited warranty and is intended for gasoline fuel systems only.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7042\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Carburetor Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1 Count\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Carburetor Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999320919\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits carburetors originally identified by OMC part numbers 392061, 396701, and 398729.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOMC 392061\u003c\/li\u003e\n\u003cli\u003eOMC 396701\u003c\/li\u003e\n\u003cli\u003eOMC 398729\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-7042 Carburetor Kit include?\u003c\/strong\u003e The 18-7042 kit is packaged as a single complete carburetor kit (1 count) with a machined exterior finish, intended for gasoline fuel system applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich OEM part numbers does the 18-7042 carburetor kit replace?\u003c\/strong\u003e It cross-references to OMC carburetor part numbers 392061, 396701, and 398729, so it can be ordered in place of any of those numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-7042 kit weigh?\u003c\/strong\u003e The kit weighs 0.16 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-7042 kit made for gasoline or diesel engines?\u003c\/strong\u003e This carburetor kit is designed for gasoline fuel type applications only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 18-7042 carburetor kit have?\u003c\/strong\u003e The kit has a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-7042 carburetor kit come with a warranty?\u003c\/strong\u003e Yes, the 18-7042 kit is backed by a limited warranty from Sierra.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 18-7042 a genuine Sierra part number?\u003c\/strong\u003e Yes, 18-7042 is Sierra's own manufacturer part number for this carburetor kit, sold as a cross-reference replacement for the listed OMC numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many carburetor kits come in one order of part 18-7042?\u003c\/strong\u003e One order of the 18-7042 kit includes a single unit count carburetor kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-7042 kit be used if my carburetor is labeled OMC 396701?\u003c\/strong\u003e Yes, the Sierra 18-7042 kit directly cross-references to OMC 396701, along with OMC 392061 and 398729.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-7042 Carburetor Kit?\u003c\/strong\u003e The UPC for the 18-7042 Carburetor Kit is 030999320919.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988360278235,"sku":"SIE-18-7042","price":19.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7042_lg__93746.1558131399.500.750.jpg?v=1785188061"},{"product_id":"carburetor-rebuild-kit-for-mercury-mariner-outboards-replaces-1399-1717-1395-4808-sierra-18-7006-1","title":"Sierra 18-7006-1 Carburetor Gasket Kit for Mercury 3.9 HP KB-7A, KB-7B and 4 HP KB-10A Outboards","description":"\u003cp\u003eThe Sierra 18-7006-1 Carburetor Gasket Kit supplies the full set of gaskets needed to rebuild the carburetor and fuel strainer assembly on select vintage Mercury outboards. Rather than a full carburetor rebuild kit with a needle, seat, and float, this kit is a dedicated gasket set covering the carburetor flange, mounting surface, bowl, strainer cover, and filter cover, giving a technician everything required to reseal the carburetor circuit during a rebuild or leak repair without sourcing individual gaskets one at a time.\u003c\/p\u003e\u003cp\u003eEach gasket is sized to the original equipment carburetor mating surfaces used on the Mercury KB-7A, KB-7B, and KB-10A carburetor models found on 3.9 HP and 4 HP (1 cylinder) outboards. The kit is manufactured in the United States and is built to meet or exceed original equipment quality, making it a reliable choice for restoring a proper seal at the carburetor flange, bowl, and strainer without leaks or vacuum loss.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7006-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Carburetor Gasket Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 18-2572 Carburetor Flange Gasket, 18-2571 Carburetor Flange Gasket, 18-2802 Carburetor Mounting Gasket, 18-2570 Strainer Cover Gasket, 18-2575 Carburetor Bowl Gasket, 18-2569 Filter Cover Gasket, 18-2568 Strainer Cover Screw Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 15.2 centimeters H x 1.9 centimeters L x 8.8 centimeters W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282111380\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury 3.9 HP (1964-68), carburetor models KB-7A and KB-7B\u003c\/li\u003e\n\u003cli\u003eMercury 4 HP (1 cylinder) (1969-74, 80-81, 86-87), carburetor model KB-10A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGLM 40435\u003c\/li\u003e\n\u003cli\u003eMallory 9-37308\u003c\/li\u003e\n\u003cli\u003eMercury 1399-1717\u003c\/li\u003e\n\u003cli\u003eMercury 1399-2015\u003c\/li\u003e\n\u003cli\u003eMercury 1395-4808\u003c\/li\u003e\n\u003cli\u003eMercury 1395-879194024\u003c\/li\u003e\n\u003cli\u003eMercury 1399-3523\u003c\/li\u003e\n\u003cli\u003eMercury 1399-1477\u003c\/li\u003e\n\u003cli\u003eMercury 1399-5929\u003c\/li\u003e\n\u003cli\u003eMercury 1399-3798\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-7006-1 gasket kit include?\u003c\/strong\u003e The kit includes seven gaskets: 18-2572 Carburetor Flange Gasket, 18-2571 Carburetor Flange Gasket, 18-2802 Carburetor Mounting Gasket, 18-2570 Strainer Cover Gasket, 18-2575 Carburetor Bowl Gasket, 18-2569 Filter Cover Gasket, and 18-2568 Strainer Cover Screw Gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich outboards does the 18-7006-1 gasket kit fit?\u003c\/strong\u003e It fits Mercury 3.9 HP outboards from 1964-68 with KB-7A or KB-7B carburetors, and Mercury 4 HP (1 cylinder) outboards from 1969-74 and 80-81, 86-87 with the KB-10A carburetor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a full carburetor rebuild kit with a needle, seat, and float?\u003c\/strong\u003e No. The 18-7006-1 is a gasket-only kit for the carburetor and fuel strainer; it does not include a needle, seat, or float.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-7006-1 kit cross-reference?\u003c\/strong\u003e It is interchangeable with Mercury 1399-1717, 1399-2015, 1395-4808, 1395-879194024, 1399-3523, 1399-1477, 1399-5929, and 1399-3798, as well as GLM 40435 and Mallory 9-37308.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-7006-1 gasket kit weigh?\u003c\/strong\u003e The kit weighs 0.03 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the 18-7006-1 gasket kit manufactured?\u003c\/strong\u003e The Sierra 18-7006-1 kit's country of origin is the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-7006-1 gasket kit work on a KB-10A carburetor?\u003c\/strong\u003e Yes, the 18-7006-1 kit is listed for the Mercury KB-10A carburetor used on 4 HP (1 cylinder) outboards from 1969-74 and 80-81, 86-87.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-7006-1 kit include a strainer cover gasket?\u003c\/strong\u003e Yes, an 18-2570 Strainer Cover Gasket and an 18-2568 Strainer Cover Screw Gasket are both included in the 18-7006-1 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-7006-1 kit built to OEM quality?\u003c\/strong\u003e Sierra states the 18-7006-1 kit meets or exceeds original equipment quality for the carburetor and strainer gaskets it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-7006-1 gasket kit?\u003c\/strong\u003e The UPC for the Sierra 18-7006-1 Carburetor Gasket Kit is 808282111380.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-7006-1 kit be used on a 3.9 HP Mercury outboard?\u003c\/strong\u003e Yes, it is listed for the Mercury 3.9 HP outboard built 1964-68 with the KB-7A or KB-7B carburetor.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988360311003,"sku":"SIE-18-7006-1","price":7.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7006-1_lg__87516.1558130171.500.750.jpg?v=1785189102"},{"product_id":"sierra-18-7043-carburetor-kit-without-float-for-evinrude-johnson-outboards-replaces-omc-392061","title":"Sierra 18-7043 Carburetor Kit for OMC 1.5-6 HP Outboards, Replaces 382046, 382047, 382049","description":"\u003cp\u003eThe Sierra 18-7043 Carburetor Kit is a bolt-on carburetor rebuild kit for select OMC outboard motors ranging from 1.5 HP through 6 HP. It is built to restore correct carburetor function on older outboards where gaskets, seals, and internal wear parts have degraded over time, helping resolve rough idling, flooding, hard starting, and inconsistent fuel metering caused by a worn carburetor. The kit measures 8 inches by 7 inches by 1 inch and has a machined exterior finish consistent with OEM-style fit and appearance.\u003c\/p\u003e\u003cp\u003eThis is a carburetor kit without a float included, so it is intended for carburetor rebuilds where the existing float is being reused or is not needed. It carries Sierra's standard limited warranty and is designed as a direct equivalent to the original OMC carburetor hardware for the listed horsepower and year ranges. Always confirm your outboard's exact HP and model year against the fitment listed before ordering, since carburetor components on small outboards vary closely between similar engine years.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7043\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Carburetor Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Type:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 8 inches D x 7 inches W x 1 inch H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.17 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999236500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 1.5 HP (1970-90), 2 HP (1970-90), 3 HP (1952-67), 5 HP (1965-67), 5.5 HP (1954-67), 6 HP (1954-79)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1.5 HP outboards, 1970-90\u003c\/li\u003e\n\u003cli\u003e2 HP outboards, 1970-90\u003c\/li\u003e\n\u003cli\u003e3 HP outboards, 1952-67\u003c\/li\u003e\n\u003cli\u003e5 HP outboards, 1965-67\u003c\/li\u003e\n\u003cli\u003e5.5 HP outboards, 1954-67\u003c\/li\u003e\n\u003cli\u003e6 HP outboards, 1954-79\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOMC 382045\u003c\/li\u003e\n\u003cli\u003e382046\u003c\/li\u003e\n\u003cli\u003e382047\u003c\/li\u003e\n\u003cli\u003e382049\u003c\/li\u003e\n\u003cli\u003e383052\u003c\/li\u003e\n\u003cli\u003e383067\u003c\/li\u003e\n\u003cli\u003e398532\u003c\/li\u003e\n\u003cli\u003e439071\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards does the Sierra 18-7043 carburetor kit fit?\u003c\/strong\u003e This kit fits OMC outboards including 1.5 HP (1970-90), 2 HP (1970-90), 3 HP (1952-67), 5 HP (1965-67), 5.5 HP (1954-67), and 6 HP (1954-79) models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-7043 kit include a float?\u003c\/strong\u003e No, the Sierra 18-7043 is a carburetor kit without a float, intended for rebuilds where the existing float is reused.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich OEM part numbers does 18-7043 replace?\u003c\/strong\u003e It replaces OMC 382045, 382046, 382047, 382049, 383052, 383067, 398532, and 439071.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this carburetor kit?\u003c\/strong\u003e The Sierra 18-7043 measures 8 inches deep by 7 inches wide by 1 inch high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-7043 carburetor kit weigh?\u003c\/strong\u003e It weighs 0.17 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-7043 an OEM Sierra part or aftermarket?\u003c\/strong\u003e The 18-7043 is a Sierra-branded replacement kit built as a direct equivalent to the original OMC carburetor components, not an OMC-branded OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the carburetor kit have?\u003c\/strong\u003e The Sierra 18-7043 has a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flange type on this carburetor kit?\u003c\/strong\u003e The 18-7043 uses a bolt-on flange type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill 18-7043 work on a 3 HP OMC outboard from 1968?\u003c\/strong\u003e No, for the 3 HP 1968 model the correct part is 18-7094, not 18-7043; the 18-7043 covers the 3 HP 1952-67 range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a warranty included with the 18-7043 carburetor kit?\u003c\/strong\u003e Yes, the Sierra 18-7043 carburetor kit is backed by Sierra's standard limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 18-7043 kit include?\u003c\/strong\u003e The kit includes the carburetor rebuild components as a single carburetor kit unit, packaged as one count.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-7043 kit fix a rough-idling or flooding outboard carburetor?\u003c\/strong\u003e Yes, this kit is designed to restore correct carburetor function on the listed OMC outboards, addressing issues like rough idling, flooding, and hard starting caused by worn carburetor components.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988360343771,"sku":"SIE-18-7043","price":21.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7043_lg__69771.1558131444.500.750.jpg?v=1785188008"},{"product_id":"carburetor-kit-for-chrysler-force-outboard-replaces-oem-fk10003-sierra-18-7033","title":"Sierra 18-7033 Carburetor Kit for Chrysler\/Force Outboard Motor, Replaces FK10003, FK10026, FK10053, FK10102-1","description":"\u003cp\u003eThe Sierra 18-7033 Carburetor Kit restores a Chrysler\/Force outboard motor carburetor to proper working condition, giving it new sealing and metering components in one bolt-on package. It is built for outboard electrical\/fuel system service on Chrysler\/Force engines and is designed as a direct equivalent to the original equipment carburetor kit, meeting or exceeding the specification of the part it replaces.\u003c\/p\u003e\u003cp\u003eThe kit includes a carburetor mounting gasket, a bowl ring gasket, and a needle and seat kit, giving an installer the core wear items needed to rebuild the carburetor's fuel bowl and metering circuit in a single purchase rather than sourcing gaskets and the needle and seat separately. The mounting gasket has a machined exterior finish and a bolt-on flange type for a straightforward fit against the carburetor mounting surface. Each component is packaged as a one-count kit intended for a single carburetor rebuild.\u003c\/p\u003e\u003cp\u003eThis kit is intended for Chrysler\/Force outboard motor applications and is cross-referenced to the original Chrysler\/Force\/US Marine carburetor kit part numbers below, so it can be ordered using either the Sierra part number or any of the equivalent OEM numbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7033\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Carburetor Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Chrysler\/Force Outboard Motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Carburetor Mounting Gasket, Bowl Ring Gasket, Needle and Seat Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Type:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282259549\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e FK10003, FK10026, FK10053, FK10102-1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eChrysler\/Force outboard motors\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFK10003\u003c\/li\u003e\n\u003cli\u003eFK10026\u003c\/li\u003e\n\u003cli\u003eFK10053\u003c\/li\u003e\n\u003cli\u003eFK10102-1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-7033 carburetor kit include?\u003c\/strong\u003e The kit contains a carburetor mounting gasket, a bowl ring gasket, and a needle and seat kit, giving you the main gasket and metering components needed to rebuild one carburetor on a Chrysler\/Force outboard motor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-7033 kit a direct replacement for the original Chrysler\/Force carburetor kit?\u003c\/strong\u003e Yes, Sierra 18-7033 is built as a direct equivalent to the original equipment kit and is cross-referenced to Chrysler\/Force\/US Marine part numbers FK10003, FK10026, FK10053, and FK10102-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich OEM part numbers does the 18-7033 carburetor kit replace?\u003c\/strong\u003e It replaces Chrysler\/Force FK10003, FK10026, FK10053, and FK10102-1, so any of those OEM numbers can be used to identify the correct kit for a Chrysler\/Force outboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the 18-7033 carburetor kit fit?\u003c\/strong\u003e This carburetor kit is intended for Chrysler\/Force outboard motors as part of Sierra's outboard electrical\/fuel systems lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many carburetors does one 18-7033 kit service?\u003c\/strong\u003e One 18-7033 kit is packaged as a single unit count and contains enough gaskets and a needle and seat for one carburetor rebuild.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the needle and seat used for in this kit?\u003c\/strong\u003e The needle and seat included in the 18-7033 kit controls fuel entry into the carburetor bowl, and it is one of the wear items that typically needs replacement during a carburetor rebuild.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-7033 kit include a bowl gasket?\u003c\/strong\u003e Yes, a bowl ring gasket is included in the Sierra 18-7033 carburetor kit along with the carburetor mounting gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the mounting gasket in the 18-7033 kit have?\u003c\/strong\u003e The mounting gasket has a machined exterior finish and uses a bolt-on flange type for fitting to the carburetor mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-7033 carburetor kit weigh?\u003c\/strong\u003e The Sierra 18-7033 carburetor kit weighs 0.03 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-7033 a genuine OEM part or an aftermarket equivalent?\u003c\/strong\u003e Sierra 18-7033 is an aftermarket carburetor kit engineered to meet or exceed the specification of the original Chrysler\/Force carburetor kit it replaces, rather than a part sold under the Chrysler\/Force brand.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988360376539,"sku":"SIE-18-7033","price":23.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7033_lg__86333.1558131047.500.750.jpg?v=1785189069"},{"product_id":"carburetor-rebuild-kit-for-chrysler-force-outboards-replaces-fk10004-sierra-18-7037-fits-co-1a-thru-co-11a-carburetors","title":"Sierra 18-7037 Carburetor Kit for Chrysler Force 130, 135, 150 HP Outboards - Replaces FK10004\/FK10008","description":"\u003cp\u003eThe Sierra 18-7037 Carburetor Kit is a rebuild kit for the carburetor on Chrysler Force outboard engines, designed to restore correct fuel metering and idle performance in engines that are running rough, flooding, or leaking fuel from the carburetor. The kit contains the internal components needed to overhaul the carburetor, allowing an owner or technician to renew the carburetor without sourcing a full replacement unit. It fits Chrysler Force 130 HP models 1306 and 1307HA, 135 HP models 1358HA, 1358HB, and 1358HC, and 150 HP model 1508HA. Because it is built to the OEM specification for these carburetors, it is a direct fit for the applications above and cross-references to the original Chrysler Force part numbers, so it installs using the factory service procedure. This kit is a practical option for routine carburetor maintenance or for correcting hard-starting, stalling, and inconsistent idle caused by worn or gummed internal carburetor parts.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7037\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Carburetor Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Chrysler Outboard Carburetors and Kits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.19 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999320889\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e FK10004, FK10005, FK10007, FK10008, FK10027, FK10057, FK10108, FRK739\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Chrysler Force 130 HP (1306\/1307HA), 135 HP (1358HA, 1358HB, 1358HC), 150 HP (1508HA)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eChrysler\/Force 130 HP - Models 1306, 1307HA\u003c\/li\u003e\n\u003cli\u003eChrysler\/Force 135 HP - Models 1358HA, 1358HB, 1358HC\u003c\/li\u003e\n\u003cli\u003eChrysler\/Force 150 HP - Model 1508HA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFK10004\u003c\/li\u003e\n\u003cli\u003eFK10005\u003c\/li\u003e\n\u003cli\u003eFK10007\u003c\/li\u003e\n\u003cli\u003eFK10008\u003c\/li\u003e\n\u003cli\u003eFK10027\u003c\/li\u003e\n\u003cli\u003eFK10057\u003c\/li\u003e\n\u003cli\u003eFK10108\u003c\/li\u003e\n\u003cli\u003eFRK739\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-7037 carburetor kit fit?\u003c\/strong\u003e The 18-7037 kit fits Chrysler Force 130 HP outboards (models 1306 and 1307HA), 135 HP models (1358HA, 1358HB, 1358HC), and the 150 HP model 1508HA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-7037 kit an OEM equivalent?\u003c\/strong\u003e Yes, the Sierra 18-7037 carburetor kit is built to the OEM specification and cross-references to Chrysler Force part numbers FK10004, FK10005, FK10007, FK10008, FK10027, FK10057, FK10108, and FRK739.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-7037 carburetor kit weigh?\u003c\/strong\u003e The kit weighs 0.19 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit work on a 120 HP Chrysler Force outboard?\u003c\/strong\u003e No, the 18-7037 kit is listed for the 130, 135, and 150 HP applications; the 120 HP models use a different carburetor part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat symptoms indicate this carburetor kit is needed?\u003c\/strong\u003e Rough idle, stalling, hard starting, and fuel leaking or flooding from the carburetor are common signs that the internal components covered by the 18-7037 kit need to be replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-7037 kit include a complete new carburetor?\u003c\/strong\u003e No, it is a rebuild kit of internal carburetor components for Chrysler Force outboards, not a complete carburetor assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-7037 kit?\u003c\/strong\u003e The UPC for the Sierra 18-7037 carburetor kit is 030999320889.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-7037 kit be used on the 1358HB and 1358HC models specifically?\u003c\/strong\u003e Yes, in addition to the 1358HA, this kit is listed for the 1358HB and 1358HC 135 HP Chrysler Force models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-7037 the same kit used across the 130, 135, and 150 HP engines?\u003c\/strong\u003e Yes, part number 18-7037 is the shared carburetor kit listed for the 130 HP (1306\/1307HA), 135 HP (1358HA\/HB\/HC), and 150 HP (1508HA) applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the 18-7037 carburetor kit?\u003c\/strong\u003e The 18-7037 carburetor kit is manufactured by Sierra.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988360442075,"sku":"SIE-18-7037","price":19.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7037_lg__21864.1558131099.500.750.jpg?v=1785189102"},{"product_id":"sierra-18-7038-carburetor-needle-seat-for-johnson-evinrude-outboards-replaces-omc-390055-0375918","title":"Sierra Needle and Seat 18-7038, Replaces 396520 379312 387262, Fits 3 HP Outboards 1952-67","description":"\u003cp\u003eThe Sierra Needle and Seat 18-7038 is a carburetor fuel metering component that controls the flow of fuel from the float bowl into the carburetor throat. As the float rises and falls with fuel level, it opens and closes the needle against the seat, shutting off fuel supply once the bowl reaches the correct level and preventing flooding or fuel starvation at the carburetor. This is a direct-fit replacement part designed to restore proper fuel metering in carburetors that use this needle and seat assembly, and it is commonly needed when an outboard is running rough, flooding, hard to start, or leaking fuel from the carburetor due to a worn or stuck needle and seat.\u003c\/p\u003e\u003cp\u003eThe part carries the Sierra part number 18-7038 and is built to match the dimensions and sealing surfaces of the original needle and seat it replaces. It is sold as the needle and seat only, so buyers should confirm they are replacing this specific component rather than a full carburetor kit with float included.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7038\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282259556\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e3 HP outboard, 1952-67\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e396520\u003c\/li\u003e\n\u003cli\u003e379312\u003c\/li\u003e\n\u003cli\u003e387262\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-7038 needle and seat do?\u003c\/strong\u003e It regulates the fuel entering the carburetor float bowl on Sierra part number 18-7038, closing off fuel flow once the float reaches the correct level so the engine does not flood or run rich.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards does the 18-7038 needle and seat fit?\u003c\/strong\u003e The 18-7038 needle and seat fits 3 HP outboards from 1952-67.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich OEM part numbers does 18-7038 replace?\u003c\/strong\u003e This needle and seat replaces OEM numbers 396520, 379312, and 387262.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-7038 come with a float?\u003c\/strong\u003e No, 18-7038 is the needle and seat assembly only and does not include the carburetor float, which is a separate component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-7038 needle and seat weigh?\u003c\/strong\u003e The Sierra 18-7038 needle and seat weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-7038 needle and seat?\u003c\/strong\u003e It measures 0.39 x 0.39 x 0.39 inches, sized to fit directly into the original carburetor needle and seat bore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-7038 a genuine Sierra part or aftermarket?\u003c\/strong\u003e 18-7038 is a Sierra-branded replacement part manufactured to match the fit and function of the original needle and seat it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the symptoms of a worn needle and seat like the 18-7038?\u003c\/strong\u003e A worn or stuck needle and seat typically causes carburetor flooding, fuel leaking from the carb, hard starting, or an engine that runs rich or rough at idle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan 18-7038 be used to fix a flooding carburetor?\u003c\/strong\u003e Yes, replacing a worn needle and seat with the Sierra 18-7038 is a common fix for a carburetor that floods due to fuel not shutting off properly at the float level.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 18-7038 the correct needle and seat for all outboard horsepower ratings?\u003c\/strong\u003e No, 18-7038 is specific to the 3 HP, 1952-67 application; other horsepower ratings and years use different Sierra needle and seat part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sierra 18-7038?\u003c\/strong\u003e The 18-7038 package contains the needle and seat assembly only, for installation into the existing carburetor body.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988360474843,"sku":"SIE-18-7038","price":7.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-7038__81730.1722515322.500.750.jpg?v=1785188290"},{"product_id":"sierra-18-7051-carburetor-repair-kit-for-honda-bf9-9-2001-up-and-bf15-2003-up-outboards","title":"Sierra Carburetor Kit 18-7051 for Honda BF9.9 (2001 \u0026 Up) and BF15 (2003 \u0026 Up) Outboards","description":"\u003cp\u003eThe Sierra 18-7051 Carburetor Kit is a carburetor repair kit engineered for specific outboard applications, delivering precise fit, form, and function for a correct rebuild. It is designed for use on Honda BF9.9 outboards (2001 and up) and Honda BF15 outboards (2003 and up), giving owners of these engines a targeted rebuild solution rather than a generic universal kit. Because the kit is application-specific, it restores carburetor performance without the fitment guesswork that comes with off-brand repair kits.\u003c\/p\u003e\u003cp\u003eRebuilding a carburetor with a properly matched kit helps resolve common outboard running issues such as rough idling, hard starting, and inconsistent fuel delivery that develop as internal carburetor components wear or gum up over time. The Sierra 18-7051 kit includes the components needed to perform this rebuild, all sold as a single kit and backed by Sierra's warranty coverage. It is a lightweight, compact part designed to be installed by a technician or a confident do-it-yourself boat owner during routine outboard maintenance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7051\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Carburetor Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.02 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282302528\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHonda BF9.9 outboards, 2001 and up\u003c\/li\u003e\n\u003cli\u003eHonda BF15 outboards, 2003 and up\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-7051 carburetor kit fit?\u003c\/strong\u003e The Sierra 18-7051 carburetor kit fits Honda BF9.9 outboards from 2001 and up, and Honda BF15 outboards from 2003 and up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-7051 a complete carburetor or a repair kit?\u003c\/strong\u003e It is a carburetor repair kit, not a complete replacement carburetor, and is sold as a single kit for rebuilding the existing carburetor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-7051 carburetor kit weigh?\u003c\/strong\u003e The kit weighs 0.02 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-7051 kit work on a Honda BF15 outboard from any model year?\u003c\/strong\u003e Sierra states this kit fits the Honda BF15 starting with the 2003 model year and up; it is not confirmed for BF15 model years prior to 2003.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-7051 kit come with a warranty?\u003c\/strong\u003e Yes, the Sierra 18-7051 carburetor kit is backed by Sierra's limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many carburetor kits are included in one 18-7051 package?\u003c\/strong\u003e Each package of part number 18-7051 contains one carburetor kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-7051 kit engineered for a specific engine or is it universal?\u003c\/strong\u003e The 18-7051 is engineered for the specific Honda BF9.9 and BF15 outboard applications listed, not as a universal fit-all carburetor kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose an application-specific kit like the 18-7051 over a generic carburetor kit?\u003c\/strong\u003e Sierra designs the 18-7051 kit for precise fit, form, and function on its specified Honda BF9.9 and BF15 applications, which helps avoid the fitment issues common with generic, non-application-specific kits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-7051 kit fix a rough-idling or hard-starting outboard?\u003c\/strong\u003e Rebuilding the carburetor with the 18-7051 kit addresses worn or fouled internal carburetor components that commonly cause rough idling and hard starting on the Honda BF9.9 and BF15 outboards it fits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-7051 carburetor kit?\u003c\/strong\u003e The UPC for the Sierra 18-7051 carburetor kit is 808282302528.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988360507611,"sku":"SIE-18-7051","price":41.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7051__12225.1558186138.500.750.jpg?v=1785188453"},{"product_id":"sierra-18-7047-carburetor-needle-valve-for-honda-outboards-replaces-16011-zv4-005-fits-bf8-2001-up-through-bf90","title":"Sierra 18-7047 Needle Valve for Honda Outboard Carburetors, Stainless Steel","description":"\u003cp\u003eThe Sierra 18-7047 is a replacement needle valve for Honda outboard carburetors, machined from stainless steel for corrosion resistance in the marine environment. The needle valve regulates fuel flow into the carburetor float bowl, closing off supply as the float rises and opening again as fuel is consumed, which keeps the fuel level in the bowl steady for consistent engine performance. A worn, pitted, or sticking needle valve is a common cause of flooding, rough idle, hard starting, and fuel leaking from the carburetor vent, so replacing it is a routine part of a carburetor rebuild or fuel system service.\u003c\/p\u003e\u003cp\u003eThis unit has a threaded inlet connection and an NPT outlet connection with two ports, and it is sized as a small precision component measuring 0.39 x 0.39 x 0.39 inches. Sierra manufactures this part to meet or exceed the specifications of the original equipment it replaces, and Sierra supplies many OEM engine manufacturers and boat builders with parts on a daily basis. It ships as a single needle valve assembly ready to install into a compatible Honda outboard carburetor.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7047\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Needle Valve Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Connection Type:\u003c\/strong\u003e Threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Connection Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Ports:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282302498\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eHonda outboard carburetors\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-7047 needle valve do?\u003c\/strong\u003e It regulates fuel flow into the carburetor float bowl on a Honda outboard, closing as the float rises to shut off supply and opening again as fuel is drawn out, which keeps the fuel level in the bowl consistent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-7047 needle valve compatible with my outboard?\u003c\/strong\u003e The Sierra 18-7047 is built for Honda outboard carburetors; check that your carburetor accepts a needle valve with a threaded inlet and NPT outlet before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-7047 needle valve made from?\u003c\/strong\u003e It is machined from stainless steel, which resists corrosion from fuel and the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is the Sierra 18-7047 needle valve?\u003c\/strong\u003e The needle valve measures 0.39 x 0.39 x 0.39 inches, a small precision-machined component sized to fit inside the carburetor float bowl assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-7047 needle valve weigh?\u003c\/strong\u003e The Sierra 18-7047 weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat symptoms indicate my Honda outboard needs a new needle valve?\u003c\/strong\u003e A worn or sticking needle valve on a Honda outboard carburetor commonly causes flooding, rough idle, hard starting, or fuel leaking from the carburetor vent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-7047 meet OEM specifications?\u003c\/strong\u003e Sierra manufactures the 18-7047 needle valve to meet or exceed the specifications of the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connection types does the 18-7047 use?\u003c\/strong\u003e The needle valve has a threaded inlet connection and an NPT outlet connection, with two ports total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-7047?\u003c\/strong\u003e You receive one Sierra 18-7047 needle valve assembly, ready to install into a compatible Honda outboard carburetor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-7047 a genuine Sierra part or aftermarket?\u003c\/strong\u003e The 18-7047 is a genuine Sierra-manufactured replacement part, not a used or reconditioned OEM component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the 18-7047 needle valve myself?\u003c\/strong\u003e Replacing a carburetor needle valve like the 18-7047 is a routine part of a carburetor rebuild or fuel system service and is commonly done during standard carburetor maintenance.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988360540379,"sku":"SIE-18-7047","price":31.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7047__58003.1558189009.500.750.jpg?v=1785188860"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/F-7150IMAGE1_cda4cbe9-aabb-4b57-a138-144898110d1e.jpg?v=1785359968","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-engine-parts-systems-fuel-system.oembed?page=4","provider":"Good Vibes Marina","version":"1.0","type":"link"}