{"title":"Ignition Switches \u0026 Kill Switches","description":null,"products":[{"product_id":"sierra-18-1282-kill-switch-lanyard-and-clip-replaces-omc-398602-fits-omc-evinrude-johnson-tiller-steer-models","title":"Sierra 18-1282 Lanyard and Clip, Replaces OMC 398602, Fits Tiller Steer Models","description":"\u003cp\u003eThe Sierra 18-1282 Lanyard and Clip is a safety lanyard designed for tiller steer outboard models, engineered to meet or exceed the quality of the original equipment part it replaces. The lanyard attaches to the engine's kill switch and to the operator, so that if the operator moves away from the helm or is thrown from the boat, the engine shuts off automatically, helping prevent a runaway boat situation. This is a standard safety accessory for tiller steer outboards and is a direct equivalent for the OMC 398602 lanyard.\u003c\/p\u003e\u003cp\u003eSierra supplies OEM engine manufacturers and boat builders with parts engineered for the demands of high horsepower engines and the harsh marine environment, and the 18-1282 lanyard and clip is built to that same standard. It ships as a single lanyard and clip unit, ready to install on compatible tiller steer outboard kill switches.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-1282\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Lanyard and Clip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTiller Steer Models - ALL\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOMC 398602\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-1282 Lanyard and Clip used for?\u003c\/strong\u003e It is a safety lanyard and clip that connects the operator to the outboard's kill switch, so the engine shuts off if the operator falls away from the helm. The Sierra 18-1282 is designed for tiller steer outboard models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-1282 replace the OMC 398602 lanyard?\u003c\/strong\u003e Yes, the Sierra 18-1282 Lanyard and Clip replaces OMC part number 398602 and is built to meet or exceed the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outboard models is the 18-1282 lanyard compatible with?\u003c\/strong\u003e This lanyard fits tiller steer outboard models, per Sierra's fitment listing for part 18-1282.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-1282 lanyard weigh?\u003c\/strong\u003e The Sierra 18-1282 Lanyard and Clip weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in the package?\u003c\/strong\u003e The Sierra 18-1282 includes 1 lanyard and clip as a single unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-1282 an OEM or aftermarket part?\u003c\/strong\u003e The Sierra 18-1282 is an aftermarket lanyard and clip engineered to meet or exceed the quality of the original OMC 398602 equipment it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this lanyard work on a remote steer outboard?\u003c\/strong\u003e The Sierra 18-1282 is listed for tiller steer outboard models; it is not designated for remote steer applications in Sierra's fitment data.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sierra 18-1282?\u003c\/strong\u003e The package includes the lanyard and clip, part number 18-1282, as the complete unit for installation on a compatible kill switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy should I replace a worn lanyard and clip?\u003c\/strong\u003e A worn or damaged lanyard can fail to engage the kill switch, so replacing it with a Sierra 18-1282 helps maintain the engine's automatic shutoff safety function.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sierra manufacture this lanyard to OEM standards?\u003c\/strong\u003e Yes, Sierra products including the 18-1282 lanyard and clip are engineered to meet or exceed the original equipment part quality.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988087353563,"sku":"SIE-18-1282","price":11.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-1282_lg__61190.1558121704.500.750.jpg?v=1785188752"},{"product_id":"sierra-18-5776-switch-box-for-mercury-mariner-outboards-replaces-mercury-339-7452a3-339-7452a2-339-7452a1","title":"Sierra Switch Box 18-5776-1 for Mercury 18 HP and 25 HP Outboard Motors","description":"\u003cp\u003eThe Sierra 18-5776-1 Switch Box is an ignition switch box built to meet or exceed the quality of the original equipment part it replaces. It serves as the ignition control component on select Mercury outboard motors, managing the electrical signal that fires the spark at the correct time for reliable engine starting and running performance. The switch box is a direct fit for the specific Mercury outboard applications listed below, so confirming your engine's serial number before ordering is important to ensure proper fit.\u003c\/p\u003e\u003cp\u003eThis switch box is engineered as a precise replacement, matching the form, fit, and function of the original Mercury switch box on covered applications. It is compatible with aftermarket cross-reference parts from other major ignition brands, giving boat owners a dependable option when sourcing a replacement for aging or failed ignition components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5776-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Mercury Outboard Switch Box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.21 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282392611\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury 18 HP outboard, serial numbers 5837437 to 6443972\u003c\/li\u003e\n\u003cli\u003eMercury 25 HP outboard, serial numbers 5705532 to 6443972\u003c\/li\u003e\n\u003cli\u003eMercury 25 HP outboard with nut connection, serial numbers 6443973 and up\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCDI 114-7452A3\u003c\/li\u003e\n\u003cli\u003eMallory 9-25101\u003c\/li\u003e\n\u003cli\u003eMercury 339-7452A3\u003c\/li\u003e\n\u003cli\u003eMercury 339-7452A2\u003c\/li\u003e\n\u003cli\u003eMercury 339-7452A1\u003c\/li\u003e\n\u003cli\u003eMercury 899883230\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-5776-1 switch box used for?\u003c\/strong\u003e The Sierra 18-5776-1 is an ignition switch box that controls the timing of the spark signal on compatible Mercury outboard motors, and it is required for the engine to start and run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Mercury outboards fit the 18-5776-1 switch box?\u003c\/strong\u003e This switch box fits Mercury 18 HP outboards with serial numbers 5837437 to 6443972, and Mercury 25 HP outboards with serial numbers 5705532 to 6443972 or, for the nut connection version, serial numbers 6443973 and up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my engine uses the nut connection version?\u003c\/strong\u003e Mercury 25 HP outboards with serial number 6443973 and up use the nut connection switch box, which is the configuration supplied by the Sierra 18-5776-1; earlier 25 HP serial numbers in the 5705532 to 6443972 range use a different connection type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-5776-1 switch box replace?\u003c\/strong\u003e The Sierra 18-5776-1 cross-references to Mercury 339-7452A3, 339-7452A2, 339-7452A1, and 899883230, as well as CDI 114-7452A3 and Mallory 9-25101.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5776-1 an OEM or aftermarket switch box?\u003c\/strong\u003e It is an aftermarket switch box manufactured by Sierra that is designed to meet or exceed the quality of the original Mercury equipment it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-5776-1 switch box?\u003c\/strong\u003e The switch box has a white finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5776-1 switch box weigh?\u003c\/strong\u003e The Sierra 18-5776-1 switch box weighs 0.21 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-5776-1 switch box?\u003c\/strong\u003e The unit measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 18-5776-1 on any Mercury outboard?\u003c\/strong\u003e No, fit is specific to certain Mercury 18 HP and 25 HP outboards by serial number range, so the serial number should be checked against the fitment before ordering the 18-5776-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the switch box come as a single unit?\u003c\/strong\u003e Yes, the Sierra 18-5776-1 is supplied as one switch box unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a different part number for other Mercury serial ranges?\u003c\/strong\u003e Yes, other Mercury 18, 20, and 25 HP serial ranges use a different Sierra switch box part number, so confirming the exact serial number is necessary before ordering the 18-5776-1.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988304015579,"sku":"SIE-18-5776-1","price":161.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-5776_lg__76034.1558128453.500.750.jpg?v=1785189189"},{"product_id":"sierra-18-5881-1-marine-switch-box-for-mercury-mariner-4-cylinder-inline-adi-ignition-outboards-replaces-oem-332-5772a7","title":"Sierra 18-5881 Switch Box for Mercury 120 HP 4-Cylinder Inline Outboards with ADI Ignition","description":"\u003cp\u003eThe Sierra 18-5881 is an ignition switch box engineered for Mercury 120 HP four-cylinder in-line outboards equipped with ADI (alternator driven ignition) ignition systems. It serves as the central switching component in the ignition circuit, controlling current flow to the ignition coil and related components so the engine fires reliably in the demanding marine environment. The unit operates on a 12-volt system at a 5-amp current rating with a normally open, single-circuit contact configuration, and connects into the harness through a clamp-style connector.\u003c\/p\u003e\u003cp\u003eConstruction uses stainless steel and bronze contact materials chosen for resistance to corrosion from moisture and salt exposure, and the housing measures 9.8 x 4.6 x 0.9 inches. Sierra builds this switch box to meet or exceed the performance of the original equipment part it replaces, supplying the same fit and electrical function expected by Mercury 120 HP owners running the affected engine serial ranges.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5881\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Switch Box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e 4-cylinder in-line outboards with ADI ignition systems, 120 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 5 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 1-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Stainless Steel, Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9.8 x 4.6 x 0.9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.17 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Teleflex Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury 120 HP, 1991D-1992C, 1993, 1994, Serial Number E000001-E093699\u003c\/li\u003e\n\u003cli\u003eMercury 120 HP, 1995, Serial Number E093700-E138599\u003c\/li\u003e\n\u003cli\u003eMercury 120 HP, 1991-1992, L-Drive\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-5881 switch box fit?\u003c\/strong\u003e It fits Mercury 120 HP four-cylinder in-line outboards equipped with ADI ignition systems, covering serial number range E000001-E093699 for 1991D-1992C, 1993, and 1994, serial range E093700-E138599 for 1995, and the L-Drive version for 1991-1992.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5881 a genuine replacement or an aftermarket copy?\u003c\/strong\u003e Sierra part 18-5881 is engineered to meet or exceed the performance of the original equipment switch box it replaces, providing the same fit and electrical function for the applicable Mercury 120 HP outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and amperage does this switch box handle?\u003c\/strong\u003e The 18-5881 operates on a 12-volt marine electrical system and is rated for 5 amps of current.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the physical dimensions of the switch box?\u003c\/strong\u003e The Sierra 18-5881 measures 9.8 x 4.6 x 0.9 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5881 switch box weigh?\u003c\/strong\u003e It weighs 1.17 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the switch contacts made from?\u003c\/strong\u003e The 18-5881 uses stainless steel and bronze contact materials, chosen for resistance to corrosion in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5881 fit L-Drive Mercury 120 HP outboards?\u003c\/strong\u003e Yes, it fits the 1991-1992 L-Drive version of the Mercury 120 HP outboard in addition to the standard in-line configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of connector does the switch box use?\u003c\/strong\u003e The Sierra 18-5881 connects through a clamp-style connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this switch box normally open or normally closed?\u003c\/strong\u003e The 18-5881 uses a normally open contact with a single-circuit (1-way) configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho manufactures the Sierra 18-5881 switch box?\u003c\/strong\u003e It is manufactured by Teleflex Marine under the Sierra brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat ignition system does the 18-5881 work with?\u003c\/strong\u003e This switch box is built for ADI (alternator driven ignition) systems used on Mercury 120 HP four-cylinder in-line outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box when I order the 18-5881?\u003c\/strong\u003e You receive one Sierra 18-5881 switch box.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988340617435,"sku":"SIE-18-5881-1","price":257.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__12511.1753840682.500.750.jpg?v=1785188707"},{"product_id":"sierra-mp28860-engine-cut-off-safety-lanyard-for-yamaha-outboards-replaces-yamaha-682-82556-00-00","title":"Sierra MP28860 Yamaha Outboard Ignition Safety Lanyard - Replaces Yamaha 6E9-82575-02-00","description":"\u003cp\u003eThe Sierra MP28860 is a replacement ignition safety lanyard engineered for Yamaha outboard ignition switches. The lanyard is the physical link between the operator and the ignition circuit: with the lanyard attached, the circuit stays closed and the engine can run; when the lanyard is removed or pulled free, the circuit opens and the engine shuts down. This push-to-kill function is a core safety feature on outboard-powered boats, allowing the engine to be stopped quickly if the operator is thrown from the helm or otherwise separated from the controls.\u003c\/p\u003e\u003cp\u003eSierra built the MP28860 with a compact, machined exterior finish for a precise, durable fit at the switch connection point. It measures 0.39 x 0.39 x 0.39 inches and weighs 0.04 pounds, keeping it small enough to clip to a wrist, belt, or PFD without adding bulk. The MP28860 is a universal fit replacement lanyard designed to cross-reference directly with the Yamaha 6E9-82575-02-00 lanyard, making it a straightforward swap when an original lanyard is lost, worn, or damaged.\u003c\/p\u003e\u003cp\u003eThis is a standalone replacement lanyard only -- it is intended for use with an existing Yamaha outboard ignition switch that accepts a compatible kill-switch lanyard.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP28860\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Yamaha Outboard Ignition Switch Lanyard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282286583\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e Yamaha 6E9-82575-02-00\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for Yamaha outboard ignition switches that use a push-to-kill lanyard; universal fit.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eYamaha 6E9-82575-02-00\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part does the Sierra MP28860 lanyard replace?\u003c\/strong\u003e The Sierra MP28860 cross-references directly with the Yamaha 6E9-82575-02-00 ignition lanyard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this lanyard function as a safety switch?\u003c\/strong\u003e With the MP28860 lanyard attached to the ignition switch, the ignition circuit stays closed and the engine can run; pulling the lanyard free opens the circuit and shuts the engine down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the MP28860 lanyard?\u003c\/strong\u003e The Sierra MP28860 measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP28860 lanyard weigh?\u003c\/strong\u003e It weighs 0.04 pounds, keeping the Sierra MP28860 light enough to clip on without adding bulk.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP28860 a genuine Yamaha part or an aftermarket replacement?\u003c\/strong\u003e The MP28860 is a Sierra aftermarket replacement lanyard built to replace the Yamaha 6E9-82575-02-00, not a Yamaha-branded original part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the exterior finish on this lanyard?\u003c\/strong\u003e The Sierra MP28860 has a machined exterior finish for a precise fit at the ignition switch connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP28860 fit switches other than Yamaha?\u003c\/strong\u003e The Sierra MP28860 is listed as a universal fit lanyard, though it is specifically cross-referenced to the Yamaha 6E9-82575-02-00 lanyard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the package with the MP28860?\u003c\/strong\u003e The package contains one Sierra MP28860 replacement ignition lanyard; the ignition switch itself is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the MP28860 lanyard be used as a spare or backup?\u003c\/strong\u003e Yes, since the MP28860 is a direct replacement for the Yamaha 6E9-82575-02-00 lanyard, it works well as a spare to keep on board.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra MP28860 lanyard?\u003c\/strong\u003e The UPC for the Sierra MP28860 ignition safety lanyard is 808282286583.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988454453467,"sku":"SIE-MP28860","price":38.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-MP28860__53018.1722372737.500.750.jpg?v=1785189131"},{"product_id":"sierra-mp39090-marine-ignition-switch-3-position-magneto-push-to-choke-universal-fit","title":"Sierra MP39090 3-Position Magneto Ignition Switch, Push to Choke, White","description":"\u003cp\u003eThe Sierra MP39090 is a 3-position magneto ignition switch built for marine helm panels, with Off, Run, and Start positions and a push-to-choke function for cold starts. The switch housing is molded from marine grade Polyester, a non-conductive material that eliminates the potential for shorts in wet, corrosive marine environments. An inner seal between the cylinder lock and the contact plate provides maximum corrosion protection and helps eliminate oxidation over time, which keeps the switch working reliably even after repeated exposure to spray and humidity.\u003c\/p\u003e\u003cp\u003eThe switch is finished in white and mounts through a 7\/8 inch panel hole, fitting panels up to 1 1\/8 inch maximum thickness. Hardware includes an anodized steel back up nut and a hex plastic face nut with a snap-on rubber cap to protect the terminals from moisture. Electrical connections are made via 6 screw tab terminals, and the switch is rated for 15 Amp at 12 Volts DC on ignition, 30 Amp at 12 Volts DC on the solenoid circuit, and 7 Amp at 12 Volts DC on choke. It is a universal fit switch, making it a straightforward replacement wherever a 3-position magneto ignition switch with push-to-choke operation is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP39090\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e 3-Position Magneto Ignition Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Positions:\u003c\/strong\u003e Off, Run, Start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Push to Choke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Up Nut:\u003c\/strong\u003e Anodized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Nut:\u003c\/strong\u003e Hex plastic face nut with snap-on rubber cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e 6 Screw Tab\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Size:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Panel Thickness:\u003c\/strong\u003e 1 1\/8 inch (Long length)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Rating:\u003c\/strong\u003e 15 Amp at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolenoid Rating:\u003c\/strong\u003e 30 Amp at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoke Rating:\u003c\/strong\u003e 7 Amp at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.26 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for panels with a 7\/8 inch mounting hole and up to 1 1\/8 inch maximum panel thickness.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat are the switch positions on the Sierra MP39090?\u003c\/strong\u003e The MP39090 has three positions: Off, Run, and Start, with a push-to-choke function built into the switch for cold engine starts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole does this ignition switch need?\u003c\/strong\u003e A 7\/8 inch panel hole is required to mount the Sierra MP39090, and it fits panels up to 1 1\/8 inch maximum thickness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP39090 rated for both ignition and solenoid circuits?\u003c\/strong\u003e Yes, the switch is rated 15 Amp at 12 Volts DC for the ignition circuit, 30 Amp at 12 Volts DC for the solenoid circuit, and 7 Amp at 12 Volts DC for the choke circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra MP39090 switch housing made from?\u003c\/strong\u003e The housing is made from marine grade Polyester, a non-conductive material that eliminates the potential for electrical shorts in wet marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch include mounting hardware?\u003c\/strong\u003e Yes, the MP39090 comes with an anodized steel back up nut and a hex plastic face nut fitted with a snap-on rubber cap for weather protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the MP39090 ignition switch?\u003c\/strong\u003e It is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does the Sierra MP39090 have?\u003c\/strong\u003e The switch uses a 6 screw tab terminal type for wiring connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the MP39090 fit any boat?\u003c\/strong\u003e The Sierra MP39090 is a universal fit switch, designed to work wherever a 3-position magneto ignition switch with a 7\/8 inch mounting hole is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this switch resist corrosion?\u003c\/strong\u003e An inner seal between the cylinder lock and the contact plate on the MP39090 provides maximum corrosion protection and helps eliminate oxidation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does push to choke mean on this switch?\u003c\/strong\u003e Push to choke means the MP39090 activates the choke function when the key is pushed in, in addition to its Off, Run, and Start rotary positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra MP39090 weigh?\u003c\/strong\u003e The Sierra MP39090 ignition switch weighs 0.26 pounds.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988454486235,"sku":"SIE-MP39090","price":43.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-MP39090__17739.1722480895.500.750.jpg?v=1785188824"},{"product_id":"sierra-mp39060-1-marine-ignition-switch-3-position-brass-panel-mount-12v-dc-universal-fit","title":"Sierra MP39060-1 Brass Ignition Switch, 3-Position, White, 7\/8 Inch Hole","description":"\u003cp\u003eThe Sierra MP39060-1 is a 3-position brass ignition switch built for panel mounting on boats and other 12-volt DC applications. The switch body and back up nut are brass for corrosion resistance, and the face is finished with a hex chrome face nut for a clean, durable panel appearance in white. It uses a 3 screw tab terminal design for a secure wiring connection, and it is rated for 15 Amp at 12 Volts DC on the ignition circuit, 30 Amp at 12 Volts DC on the solenoid circuit, and 15 Amp at 12 Volts DC on the accessory circuit, making it suitable for cranking and accessory switching duty.\u003c\/p\u003e\u003cp\u003eThe switch is designed to fit a standard 7\/8 inch panel hole and accommodates a maximum panel thickness of 1-1\/8 inch, so it drops into common dash and helm panel cutouts. Its 3-position operation covers off, ignition-on, and start\/accessory functions typical of a marine ignition switch. At 0.43 pounds, it is a lightweight, straightforward replacement part for helm stations needing a reliable brass ignition switch.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP39060-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e 3 Screw Tab\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Up Nut:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Nut:\u003c\/strong\u003e Hex Chrome Face Nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Size:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Panel Thickness:\u003c\/strong\u003e 1-1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Rating:\u003c\/strong\u003e 15 Amp at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolenoid Rating:\u003c\/strong\u003e 30 Amp at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessory Rating:\u003c\/strong\u003e 15 Amp at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.43 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hole size does the Sierra MP39060-1 ignition switch require?\u003c\/strong\u003e The Sierra MP39060-1 mounts into a 7\/8 inch panel hole and fits panels up to 1-1\/8 inch thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP39060-1 switch made of brass?\u003c\/strong\u003e Yes, the Sierra MP39060-1 has a brass switch body and a brass back up nut, with a hex chrome face nut on the front.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many positions does this ignition switch have?\u003c\/strong\u003e 3 positions, matching typical off, ignition-on, and start\/accessory operation for a marine ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage rating of the MP39060-1?\u003c\/strong\u003e 15 Amp at 12 Volts DC on the ignition circuit, 30 Amp at 12 Volts DC on the solenoid circuit, and 15 Amp at 12 Volts DC on the accessory circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra MP39060-1 ignition switch?\u003c\/strong\u003e It is finished in white with a hex chrome face nut visible on the mounted side of the panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat terminal type does this switch use?\u003c\/strong\u003e The MP39060-1 uses a 3 screw tab terminal type for wiring connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP39060-1 ignition switch weigh?\u003c\/strong\u003e 0.43 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP39060-1 include a back up nut and face nut?\u003c\/strong\u003e Yes, a brass back up nut and a hex chrome face nut are part of the Sierra MP39060-1 ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum panel thickness this switch can be installed in?\u003c\/strong\u003e 1-1\/8 inch maximum panel thickness for the Sierra MP39060-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP39060-1 suitable for cranking a marine engine?\u003c\/strong\u003e Its solenoid circuit is rated 30 Amp at 12 Volts DC, which supports the cranking\/start function on the switch's 3-position design.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988454519003,"sku":"SIE-MP39060-1","price":37.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MP39060-1__23417.1739477163.500.750.jpg?v=1785188777"},{"product_id":"sierra-mp39100-ignition-switch-for-evinrude-johnson-outboards-replaces-386545-3-position-magneto-conventional","title":"Sierra MP39100 Ignition Switch, 3-Position Magneto with Lanyard, Replaces Evinrude\/Johnson 386545","description":"\u003cp\u003eThe Sierra MP39100 is a 3-position magneto ignition switch built for outboard and marine engines that use a magneto-style or conventional ignition circuit. It features a brass back up nut and a hex black plastic face nut, with a 7\/8 inch hole size for mounting through the dash or console. An inner seal between the lock cylinder and the contact plate helps keep moisture and salt spray out of the electrical contacts, and the non-conductive housing is designed to eliminate the potential for shorts at the switch body. The switch is rated for 12 volt systems at 20 amps and is built to resist corrosion, an important feature for any component mounted in a marine engine's electrical system.\u003c\/p\u003e\u003cp\u003eThe MP39100 is designed as a direct interchange for the Evinrude\/Johnson 386545 ignition switch, making it a straightforward replacement when an original equipment switch has failed, corroded, or worn out. It works with both magneto and conventional outboard ignition systems, and its compact 0.39 x 0.39 x 0.39 inch dimensions match standard ignition switch mounting cutouts.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP39100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e 3-Position (Magneto)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Up Nut Material:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Nut:\u003c\/strong\u003e Hex Black Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Size:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 20 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e Evinrude\/Johnson 386545\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eEvinrude\/Johnson 386545\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra MP39100 ignition switch replace?\u003c\/strong\u003e The MP39100 is a direct interchange for the Evinrude\/Johnson 386545 ignition switch, so it can be installed as a replacement wherever that original switch was used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP39100 a genuine Evinrude\/Johnson part or aftermarket?\u003c\/strong\u003e The MP39100 is a Sierra-branded aftermarket ignition switch manufactured to be interchangeable with the Evinrude\/Johnson 386545, not an OEM Evinrude\/Johnson part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole does this switch need?\u003c\/strong\u003e The Sierra MP39100 requires a 7\/8 inch hole size for mounting through the dash or console.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the MP39100 work with a magneto ignition system?\u003c\/strong\u003e Yes, the MP39100 is a 3-position magneto switch that works with both magneto and conventional outboard ignition systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the voltage and amperage rating of the MP39100?\u003c\/strong\u003e This ignition switch is rated for 12 volt systems at 20 amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials are used in the MP39100 ignition switch?\u003c\/strong\u003e The MP39100 uses a brass back up nut and a hex black plastic face nut, with a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the MP39100 protect against corrosion?\u003c\/strong\u003e The switch is built with maximum corrosion protection to eliminate oxidation, along with an inner seal between the lock cylinder and the contact plate to keep moisture out of the electrical contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the MP39100 have a non-conductive housing?\u003c\/strong\u003e The non-conductive housing on the MP39100 is designed to eliminate the potential for electrical shorts at the switch body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the physical dimensions of the MP39100?\u003c\/strong\u003e The Sierra MP39100 ignition switch measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP39100 ignition switch weigh?\u003c\/strong\u003e The MP39100 weighs 0.28 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP39100 include a lanyard?\u003c\/strong\u003e The MP39100 is a 3-position magneto switch designed for use with a lanyard-style ignition setup.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988454551771,"sku":"SIE-MP39100","price":27.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MP39100__06629.1737840450.500.750.jpg?v=1785188665"},{"product_id":"sierra-mp28870-emergency-cut-off-kill-switch-replaces-omc-585134-panel-mount-for-marine-conventional-and-magneto-ignitions","title":"Sierra MP28870 Emergency Cut-Off Switch, White, Replaces OMC 585134","description":"\u003cp\u003eThe Sierra MP28870 is an emergency cut-off switch built to kill ignition power the instant the safety lanyard is pulled free. The circuit stays closed while the lanyard is in place and opens the moment it is removed, cutting the engine so a boat cannot run away from an operator who has left the helm. It is designed for use with conventional or magneto ignitions and mounts through a panel up to 1\/4 inch thick, with screw terminals for a straightforward wiring connection. The housing is brass for corrosion resistance in a marine environment, finished in white, and the switch is rated IP54 to help seal out moisture and spray around the panel opening. It operates manually as a 2-way, 2-position break-type switch, and its compact 0.39 x 0.39 x 0.39 inch profile keeps the panel footprint small. The design also makes re-connection easier after the lanyard is reattached. This switch is intended to replace OMC 585134, and the matching replacement lanyard is the Sierra MP28900, which can be ordered separately when the original lanyard wears out or is lost.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP28870\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Cut Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Break\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 2-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw Terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Thickness:\u003c\/strong\u003e Up to 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282367169\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Lanyard:\u003c\/strong\u003e MP28900\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for use with conventional or magneto ignition systems on panels up to 1\/4 inch thick.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOMC 585134\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra MP28870 emergency cut-off switch do?\u003c\/strong\u003e The Sierra MP28870 keeps the ignition circuit closed only while its lanyard is attached; pulling the lanyard opens the circuit and kills engine power, which is the basic safety function of an emergency cut-off switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP28870 compatible with my ignition system?\u003c\/strong\u003e Yes, the Sierra MP28870 is built for use with either conventional or magneto ignition systems, so it covers both common setups found on boats needing this type of cut-off switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP28870 replace OMC 585134?\u003c\/strong\u003e Yes, the Sierra MP28870 is a direct replacement for OMC part number 585134.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the MP28870 switch?\u003c\/strong\u003e The Sierra MP28870 measures 0.39 x 0.39 x 0.39 inches, a compact size meant to fit through a small panel cutout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick a panel can the MP28870 be mounted in?\u003c\/strong\u003e This switch is rated for panel mounting on thicknesses up to 1\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the MP28870 switch made of?\u003c\/strong\u003e The MP28870 has a brass housing, chosen for its corrosion resistance in marine environments, finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP28870 weigh?\u003c\/strong\u003e The Sierra MP28870 emergency cut-off switch weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP28870 sealed against moisture?\u003c\/strong\u003e Yes, it carries an IP54 protection rating, which helps seal out moisture and spray around the switch and panel opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat replacement lanyard works with the MP28870?\u003c\/strong\u003e The Sierra MP28900 is the replacement lanyard designed for use with the MP28870 emergency cut-off switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP28870 a manual switch, and how many positions does it have?\u003c\/strong\u003e The MP28870 is a manual, 2-way switch with 2 positions and a break-type contact, meaning the circuit opens when the lanyard is removed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes removing the lanyard immediately cut power on the MP28870?\u003c\/strong\u003e Yes, the circuit is closed only while the lanyard is in place on the MP28870; once the lanyard comes off, the circuit opens and power is cut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat terminals does the MP28870 use for wiring?\u003c\/strong\u003e The Sierra MP28870 uses screw terminals for its electrical connections, making it straightforward to wire into an existing ignition circuit.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988454584539,"sku":"SIE-MP28870","price":40.12,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sie-mp28870_lg__83344.1722482562.500.750.jpg?v=1785188722"},{"product_id":"sierra-mp39400-marine-push-pull-switch-3-screw-terminals-3-8-bushing-replaces-cole-hersee-m-641-01-m630","title":"Sierra MP39400 Marine Push-Pull Switch, Chrome Plated Brass, 3-Terminal, ON-OFF","description":"\u003cp\u003eThe Sierra MP39400 is a marine push-pull switch built from solid brass with a chrome plated brass knob, designed for ON-OFF circuit control aboard boats where corrosion resistance and durability matter. The switch features 3 screw terminals for wiring and a 3\/8 inch mounting bushing for installation into a standard panel cutout. Because it uses a push-pull actuator with 3 terminals, it can be wired to control the same circuit from two separate locations, making it useful for setups like dual helm stations or accessory circuits that need switching from more than one point. The chrome plated brass knob and solid brass body give the switch a corrosion-resistant finish suited to the marine environment, and the unit carries an IP54 ingress protection rating for resistance to dust and splashing water. Sierra manufactures this switch to meet or exceed the performance of the original equipment it replaces, and Sierra backs its products with an industry-leading warranty covering posted shop labor, haul-out, towing fees, and related incidental charges. This is a compact, screw-terminal switch intended for straightforward panel-mounted installation rather than a specific engine or drive application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP39400\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Push-Pull\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e ON-OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e 3 screw terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Bushing:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chrome, Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKnob Finish:\u003c\/strong\u003e Chrome plated brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5.9 x 2.5 x 1.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.23 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282190026\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra MP39400 used for?\u003c\/strong\u003e The Sierra MP39400 is a marine push-pull switch used for ON-OFF control of an electrical circuit, and its push-pull design allows the same circuit to be controlled from two separate locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does the MP39400 have?\u003c\/strong\u003e This switch has 3 screw terminals for wiring connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole does the MP39400 require?\u003c\/strong\u003e The Sierra MP39400 uses a 3\/8 inch mounting bushing, so it is designed for a panel cutout sized to that bushing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the MP39400 switch made of?\u003c\/strong\u003e It is constructed of solid brass with a chrome plated brass knob, giving it a corrosion-resistant finish suited to marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this switch control a circuit from two locations?\u003c\/strong\u003e Yes, the push-pull design of the Sierra MP39400 lets it be wired to control the same circuit from two separate locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sierra MP39400?\u003c\/strong\u003e The switch measures 5.9 x 2.5 x 1.3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP39400 weigh?\u003c\/strong\u003e The Sierra MP39400 weighs 0.23 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP39400 rated for water or dust resistance?\u003c\/strong\u003e This switch carries an IP54 ingress protection rating, meaning it resists dust ingress and splashing water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP39400 meet OEM performance standards?\u003c\/strong\u003e Sierra manufactures the MP39400 to meet or exceed the performance of the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat operation mode does this switch use?\u003c\/strong\u003e The Sierra MP39400 operates in ON-OFF mode via its push-pull actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra MP39400?\u003c\/strong\u003e The UPC for the Sierra MP39400 push-pull switch is 808282190026.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP39400 covered by a warranty?\u003c\/strong\u003e Sierra backs the MP39400 with an industry-leading warranty that covers posted shop labor, haul-out, towing fees, and related incidental charges.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988454781147,"sku":"SIE-MP39400","price":11.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-MP39400__58648.1722494802.500.750.jpg?v=1785188458"},{"product_id":"sierra-mp41040-marine-ignition-switch-4-position-conventional-acc-off-run-start-4-screw-tab-7-8-panel-mount","title":"Sierra MP41040 Ignition Switch, 4-Position Conventional, 15 Amp, Knurled Black Plastic Cap","description":"\u003cp\u003eThe Sierra MP41040 is a 4-position conventional marine ignition switch built for panel mounting on boats that need Accessory, Off, Run, and Start functions from a single switch. The switch body is constructed of polyester for resistance to the harsh marine environment, while the visible face nut is a knurled black plastic design fitted with a rubber cap to help keep moisture out of the switch mechanism. A brass back-up nut secures the switch to the panel from behind.\u003c\/p\u003e\u003cp\u003eElectrically, the MP41040 is rated for three separate circuits: 15 Amp at 12 VDC on the ignition circuit, 30 Amp at 12 VDC on the solenoid circuit, and 15 Amp at 12 VDC on the accessory circuit, giving it enough capacity to handle ignition, starter solenoid engagement, and accessory loads through the same key switch. Termination is via 4 screw tab terminals, making wiring straightforward during installation or a switch replacement.\u003c\/p\u003e\u003cp\u003eThe switch mounts through a 7\/8 inch panel hole and is built with a long shaft, accommodating panels up to 1 1\/8 inch maximum thickness. This makes the MP41040 a straightforward drop-in replacement for boats with a matching 4-position, 4 screw tab ignition switch layout.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP41040\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Ignition Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Acc - Off - Run - Start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e 4 Screw Tab\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Circuit Rating:\u003c\/strong\u003e 15 Amp at 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolenoid Circuit Rating:\u003c\/strong\u003e 30 Amp at 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessory Circuit Rating:\u003c\/strong\u003e 15 Amp at 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Up Nut:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Nut:\u003c\/strong\u003e Knurled black plastic with rubber cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Size:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Length:\u003c\/strong\u003e Long, 1 1\/8 inch maximum panel thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282367732\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for marine vehicles using a 4-position, 4 screw tab ignition switch with a 7\/8 inch mounting hole and up to 1 1\/8 inch panel thickness.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo specific OEM cross-reference numbers are listed for the MP41040.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat are the 4 positions on the Sierra MP41040 ignition switch?\u003c\/strong\u003e The MP41040 operates through Accessory, Off, Run, and Start positions, giving a single conventional switch full control of ignition, accessory power, and engine starting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amp rating of the MP41040 ignition switch?\u003c\/strong\u003e The ignition and accessory circuits are each rated 15 Amp at 12 VDC, while the solenoid circuit is rated 30 Amp at 12 VDC on the Sierra MP41040.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole does the MP41040 require?\u003c\/strong\u003e A 7\/8 inch panel hole is needed to install the Sierra MP41040 ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum panel thickness for this switch?\u003c\/strong\u003e The MP41040 uses a long shaft rated for panel thickness up to 1 1\/8 inch maximum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra MP41040 switch body made of?\u003c\/strong\u003e The switch body is made of polyester, with a brass back-up nut and a knurled black plastic face nut fitted with a rubber cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the face nut on the MP41040 waterproof?\u003c\/strong\u003e The knurled black plastic face nut includes a rubber cap to help protect the switch mechanism from moisture, though no IP waterproof rating is specified for this switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of terminals does the MP41040 use?\u003c\/strong\u003e The Sierra MP41040 uses 4 screw tab terminals for wiring connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP41040 fit any specific boat make or engine?\u003c\/strong\u003e The Sierra MP41040 is a universal-fit ignition switch designed for marine vehicles using a standard 4-position, 4 screw tab, 7\/8 inch hole switch configuration rather than a single make-specific fitment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP41040 ignition switch weigh?\u003c\/strong\u003e The Sierra MP41040 weighs 0.28 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sierra MP41040?\u003c\/strong\u003e The MP41040 is supplied as a single 4-position conventional ignition switch with its back-up nut and knurled black plastic face nut with rubber cap already assembled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP41040 a Normally Closed or Normally Open switch?\u003c\/strong\u003e The Sierra MP41040 is a Normally Closed contact type ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the MP41040 handle the starter solenoid circuit directly?\u003c\/strong\u003e Yes, the solenoid circuit on the Sierra MP41040 is rated 30 Amp at 12 VDC, in addition to the 15 Amp ignition and accessory circuits.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457074907,"sku":"SIE-MP41040","price":24.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-MP41040__82306.1722507075.500.750.jpg?v=1785188378"},{"product_id":"sierra-mp39830-magneto-off-run-start-ignition-switch-3-position-6-screw-tab-terminal-black","title":"Sierra MP39830 Ignition Switch, 3-Position Magneto Off-Run-Start, Replaces 386545, Evinrude Outboard","description":"\u003cp\u003eThe Sierra MP39830 is a 3-position magneto off-run-start ignition switch built for Evinrude outboard engines. It uses a 6-terminal screw tab connector layout and a pistol-shaped key, letting it slot into panel-mount ignition switch locations that call for this terminal configuration. The switch housing is molded plastic in black, sized to fit standard outboard dash cutouts. Electrically, the switch is rated for 12-volt marine ignition circuits and controls the standard off, run, and start functions through its 3-way circuit. The screw tab terminals accept ring or spade connectors for a secure wiring connection during installation, and the panel mount design allows it to be secured directly into a dash or control panel. This switch is a direct replacement for OEM part number 386545, so it can be used to replace a worn, corroded, or non-functioning original ignition switch on compatible Evinrude outboard applications without modifying existing wiring runs, since the 6-terminal screw tab layout matches the original connection points. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP39830\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Ignition Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Function:\u003c\/strong\u003e 3-Position Magneto Off-Run-Start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Terminals:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e Screw Tab\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Type:\u003c\/strong\u003e Pistol Shaped Key\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.5 x 2.13 x 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.23 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Evinrude Outboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 023121398306, 808282367695\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEvinrude outboard engines using a 6-terminal, screw tab, 3-position magneto ignition switch\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e386545\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra MP39830 ignition switch replace?\u003c\/strong\u003e It is a direct replacement for OEM ignition switch number 386545, matching the original 6-terminal screw tab connection layout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does this ignition switch have?\u003c\/strong\u003e The MP39830 has 6 terminals using a screw tab connector type, which accepts ring or spade wire connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the positions on this switch?\u003c\/strong\u003e It is a 3-position magneto switch with off, run, and start functions, operated with a pistol-shaped key.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the MP39830 ignition switch rated for?\u003c\/strong\u003e The Sierra MP39830 is rated for 12-volt marine ignition circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the MP39830 switch?\u003c\/strong\u003e The switch measures 3.5 x 2.13 x 9 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP39830 ignition switch weigh?\u003c\/strong\u003e It weighs 0.23 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the switch housing made of?\u003c\/strong\u003e The MP39830 housing is molded black plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP39830 a panel mount switch?\u003c\/strong\u003e Yes, the Sierra MP39830 is designed for panel mount installation into a dash or control panel cutout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of key comes with this ignition switch?\u003c\/strong\u003e The MP39830 uses a pistol-shaped key that operates the 3-position off-run-start function.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines is the Sierra MP39830 switch designed for?\u003c\/strong\u003e It is built for Evinrude outboard engines that use a 6-terminal, screw tab, 3-position magneto ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP39830 include the wiring harness?\u003c\/strong\u003e The MP39830 is the ignition switch itself, with 6 screw tab terminals for connecting to existing ignition wiring; it does not include a separate wiring harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra MP39830 an OEM or aftermarket part?\u003c\/strong\u003e The MP39830 is a Sierra aftermarket ignition switch engineered to match and replace OEM part 386545.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457238747,"sku":"SIE-MP39830","price":51.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MP39830__05648.1722491797.500.750.jpg?v=1785188984"},{"product_id":"sierra-mp41030-marine-ignition-switch-3-position-off-run-start-panel-mount-with-rubber-cap","title":"Sierra MP41030 Marine Ignition Switch, 3-Position Off-Run-Start","description":"\u003cp\u003eThe Sierra MP41030 is a 3-position Off-Run-Start ignition switch built for panel mounting on boats and other marine applications. The switch body is constructed of polyester, and wiring connects via 3 screw tab terminals for a secure, corrosion-resistant electrical connection. A brass back up nut secures the switch to the panel, while the knurled black plastic face nut with a rubber cap protects the switch cylinder from spray and moisture.\u003c\/p\u003e\u003cp\u003eThe MP41030 is rated for 15 Amps at 12 Volts DC on the ignition circuit and 30 Amps at 12 Volts DC on the solenoid circuit, making it suitable for standard 12-volt marine ignition and starting circuits. It mounts through a 7\/8 inch hole and is designed for panels up to 5\/8 inch maximum thickness. This is a universal-fit switch, so it is not tied to a specific engine make or model, and installs anywhere a compatible Off-Run-Start ignition switch is required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP41030\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Ignition Switch, 3-Position Off-Run-Start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e 3 Screw Tab\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Up Nut:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Nut:\u003c\/strong\u003e Knurled black plastic with rubber cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Size:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Panel Thickness:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Rating:\u003c\/strong\u003e 15 Amps at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolenoid Rating:\u003c\/strong\u003e 30 Amps at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.26 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282367725\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit; not limited to a specific engine make, model, or year range.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for the Sierra MP41030.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Off-Run-Start designation mean on the MP41030?\u003c\/strong\u003e It means the Sierra MP41030 has three switch positions: Off, Run, and Start, covering the standard cycle for turning on accessories, running the engine, and cranking it over.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage is the MP41030 rated for?\u003c\/strong\u003e The MP41030 is rated at 15 Amps at 12 Volts DC on the ignition circuit and 30 Amps at 12 Volts DC on the solenoid circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole does this switch need?\u003c\/strong\u003e A 7\/8 inch mounting hole is required to install the Sierra MP41030 ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick can my panel be for this switch to fit?\u003c\/strong\u003e The MP41030 is designed for panels up to 5\/8 inch maximum thickness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the switch body made of?\u003c\/strong\u003e The Sierra MP41030 has a polyester switch body, chosen for durability in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I wire the MP41030?\u003c\/strong\u003e Wiring connects via 3 screw tab terminals on the back of the switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch fit a specific boat engine make or model?\u003c\/strong\u003e No, the MP41030 is a universal-fit ignition switch and is not restricted to a particular engine make, model, or year range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat protects the switch from water and spray?\u003c\/strong\u003e A knurled black plastic face nut with a rubber cap covers the front of the switch to help keep out moisture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the back up nut made from?\u003c\/strong\u003e The back up nut on the MP41030 is brass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra MP41030 switch?\u003c\/strong\u003e The Sierra MP41030 ignition switch is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP41030 weigh?\u003c\/strong\u003e The Sierra MP41030 ignition switch weighs 0.26 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there OEM cross-reference numbers for this switch?\u003c\/strong\u003e No OEM replacement or cross-reference numbers are listed for the Sierra MP41030.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457271515,"sku":"SIE-MP41030","price":21.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-MP41030__91699.1722515981.500.750.jpg?v=1785189109"},{"product_id":"sierra-mp41000-marine-ignition-switch-3-position-magneto-with-push-to-choke-7-8-in-panel-mount-mpn-mp41000","title":"Sierra MP41000 Ignition Switch, Push to Choke 3-Position, Replaces 87-17009A2","description":"\u003cp\u003eThe Sierra MP41000 is a 3-position push-to-choke ignition switch built for marine outboard and sterndrive engines. It uses a 6-wire sealed polyester housing designed to hold up against moisture, salt spray, and vibration in the harsh marine environment, while a non-conductive housing construction helps eliminate potential shorts around the helm. An inner seal between the cylinder lock and contact plate adds a further layer of protection against water intrusion reaching the electrical contacts.\u003c\/p\u003e\u003cp\u003eThis switch mounts through a 7\/8 inch panel hole and is finished in white to match common helm and dash configurations. As a direct replacement part, it is engineered to meet or exceed the performance of the original equipment switch it replaces, making it a straightforward swap when an existing ignition switch has corroded, stuck, or failed. Sierra manufactures this and other marine electrical parts to OEM specifications, supplying engine manufacturers and boat builders with replacement components for daily use on the water.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP41000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Ignition Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Push to Choke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 3 Position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e 6 Wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e Sealed Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Size:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Crimp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal:\u003c\/strong\u003e Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4.87 x 1.62 x 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.23 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for marine ignition systems using this 3-position push-to-choke, 6-wire switch configuration.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e87-17009A2\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the MP41000 ignition switch replace?\u003c\/strong\u003e The Sierra MP41000 is a direct replacement for OEM part number 87-17009A2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many wires does this ignition switch use?\u003c\/strong\u003e The MP41000 is a 6-wire ignition switch, wired to support its 3-position push-to-choke operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole does the MP41000 need?\u003c\/strong\u003e This switch requires a 7\/8 inch panel hole for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra MP41000 switch?\u003c\/strong\u003e It is finished in white, which is a common helm and dash color for marine ignition switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP41000 sealed against water and moisture?\u003c\/strong\u003e Yes, the MP41000 has a sealed polyester housing along with an inner seal between the cylinder lock and contact plate to help keep water out of the electrical contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the MP41000 ignition switch made of?\u003c\/strong\u003e The housing is made of polyester, chosen for its resistance to the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many positions does the MP41000 have?\u003c\/strong\u003e The MP41000 is a 3-position switch with push-to-choke functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connector type does the MP41000 use?\u003c\/strong\u003e The MP41000 uses a crimp-style connector with marine-rated terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the MP41000 fit the same location as my old ignition switch?\u003c\/strong\u003e If your current switch is stamped with OEM number 87-17009A2, the MP41000 is designed as a direct fit replacement for it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra MP41000 an OEM-equivalent part or aftermarket?\u003c\/strong\u003e The MP41000 is manufactured to meet or exceed the performance of the original OEM switch it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the MP41000 ignition switch?\u003c\/strong\u003e The MP41000 measures 4.87 x 1.62 x 7 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP41000 ignition switch weigh?\u003c\/strong\u003e The MP41000 weighs 0.23 pounds.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457337051,"sku":"SIE-MP41000","price":23.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MP41000__08510.1722485269.500.750.jpg?v=1785189207"},{"product_id":"sierra-mp40960-emergency-engine-cut-off-switch-white-kill-switch-for-conventional-magneto-ignitions-fits-panels-up-to-1-4in","title":"Sierra MP40960 Emergency Cut-Off Switch, Universal Fit, Interchangeable with Sea-Dog 420486-1","description":"\u003cp\u003eThe Sierra MP40960 is a universal-fit emergency cut-off switch (kill switch) built to shut down the engine ignition the instant its lanyard is pulled free, whether the operator falls overboard or is thrown from the helm. It works with either conventional or magneto ignition systems, making it a straightforward upgrade or replacement for boats, personal watercraft, and other small-craft helms that use a pull-cord kill switch.\u003c\/p\u003e\u003cp\u003eThe switch body offers four terminals, letting the installer wire it for either a normally open or a normally closed circuit depending on how the ignition system needs to be interrupted. The housing is sealed against moisture, which helps prevent corrosion at the terminals and keeps the connection reliable in a wet cockpit environment, and the design makes re-connecting the lanyard after use quick and simple. It ships in white to blend with light-colored helm panels.\u003c\/p\u003e\u003cp\u003eBecause the lanyard itself wears out with repeated use long before the switch body does, Sierra sells a dedicated replacement lanyard, part number MP40980, so the switch can be kept in service without replacing the whole unit. The MP40960 is also a direct functional match for the Sea-Dog 420486-1 emergency cut-off switch, giving boat owners a drop-in option if that part is what their helm currently uses.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP40960\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Emergency Cut-Off Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e 4-terminal design, selectable normally open or normally closed circuit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Compatibility:\u003c\/strong\u003e Conventional or magneto ignitions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3.5 x 2.13 x 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.18 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Lanyard:\u003c\/strong\u003e MP40980\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282367183\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for small-craft helms using a pull-lanyard emergency cut-off switch; not limited to a specific engine make, horsepower, or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSea-Dog 420486-1\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra MP40960 used for?\u003c\/strong\u003e The MP40960 is an emergency cut-off switch (kill switch) that shuts down the boat's ignition the moment its lanyard is pulled, protecting against an unmanned runaway boat if the operator falls or is thrown from the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the MP40960 fit my boat?\u003c\/strong\u003e Yes, the MP40960 is a universal-fit emergency cut-off switch designed to work across small-craft helms rather than being limited to one specific boat make or engine model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP40960 work with a magneto ignition?\u003c\/strong\u003e It works with either conventional or magneto ignition systems, so it can be wired into either type without needing a different switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra MP40960 wired as normally open or normally closed?\u003c\/strong\u003e The switch has 4 terminals that allow it to be wired for either a normally open or a normally closed circuit, depending on what the boat's ignition system requires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the MP40960 emergency cut-off switch?\u003c\/strong\u003e The MP40960 measures 3.5 x 2.13 x 9 inches and weighs 0.18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra MP40960 equivalent to a Sea-Dog switch?\u003c\/strong\u003e Yes, the MP40960 is interchangeable with the Sea-Dog 420486-1 emergency cut-off switch, so it can be used as a replacement where that part number is specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the MP40960 switch?\u003c\/strong\u003e It is finished in white, which suits light-colored helm panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the lanyard on the MP40960 be replaced separately?\u003c\/strong\u003e Yes, the lanyard wears out before the switch body does, and Sierra part MP40980 is the designated replacement lanyard for the MP40960 switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP40960 resist moisture at the helm?\u003c\/strong\u003e The switch is sealed out from moisture at its connections, which helps prevent corrosion and makes reconnecting the lanyard easier after it has been pulled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with the Sierra MP40960?\u003c\/strong\u003e The MP40960 includes the switch body with its straight lanyard attached; the separate replacement lanyard, MP40980, is sold on its own when the original wears out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part or an aftermarket copy?\u003c\/strong\u003e The MP40960 is a genuine Sierra International emergency cut-off switch, not a generic aftermarket copy.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457369819,"sku":"SIE-MP40960","price":29.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MP40960__23730.1737822224.500.750.jpg?v=1785188685"},{"product_id":"sierra-mp40970-1-marine-emergency-cut-off-kill-switch-4-terminal-normally-open-closed-cross-oem-722325-white","title":"Sierra Emergency Cut-Off Switch MP40970-1, 4-Terminal Selectable Circuit, White, with Coiled Lanyard","description":"\u003cp\u003eThe Sierra MP40970-1 is an emergency cut-off switch (kill switch) built for boats that need a reliable engine-stop safeguard at the helm. If the operator is thrown from the seat or moves away from the control station, the attached lanyard pulls free of the switch and immediately interrupts the ignition circuit, shutting the engine down. This is a core piece of onboard safety equipment for anyone running an outboard or similarly equipped boat.\u003c\/p\u003e\u003cp\u003eThe switch is wired with 4 terminals, which lets it be configured for either a normally open or a normally closed circuit depending on how the boat's ignition system is set up. This flexibility means the same switch body can be installed across different wiring configurations rather than needing a dedicated part for each. It comes with its coiled lanyard attached and is finished in white to match common helm and dash hardware. Should the lanyard itself ever need replacing, Sierra's MP40990 lanyard is the correct replacement for this switch.\u003c\/p\u003e\u003cp\u003eSierra is a long-standing supplier of marine engine and ignition parts, and the MP40970-1 is sold as a direct part for boat owners and marine technicians replacing a worn or failed cut-off switch.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP40970-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Emergency Cut-Off Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e Selectable, normally open or normally closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Lanyard:\u003c\/strong\u003e MP40990\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 722325\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282200756\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNational Stock Number:\u003c\/strong\u003e 5930-01-553-8353\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal emergency cut-off switch application; no specific make, engine, or model fitment is specified for this part.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e722325\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra MP40970-1 emergency cut-off switch do?\u003c\/strong\u003e It interrupts the ignition circuit and shuts the engine down when the attached lanyard is pulled free, acting as a safety kill switch if the operator leaves the helm unexpectedly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP40970-1 come with a lanyard?\u003c\/strong\u003e Yes, the MP40970-1 emergency cut-off switch is supplied with a coiled lanyard attached.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this switch be wired for either a normally open or normally closed circuit?\u003c\/strong\u003e Yes, the MP40970-1 has 4 terminals so it can be configured for a normally open or a normally closed circuit depending on the boat's ignition wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat replacement lanyard fits the MP40970-1?\u003c\/strong\u003e The MP40990 lanyard is the correct replacement lanyard for the MP40970-1 emergency cut-off switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the MP40970-1 switch?\u003c\/strong\u003e The MP40970-1 emergency cut-off switch is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 722325 the same part as the MP40970-1?\u003c\/strong\u003e 722325 is the OEM cross-reference number for the Sierra MP40970-1, so it identifies the same emergency cut-off switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP40970-1 weigh?\u003c\/strong\u003e The MP40970-1 emergency cut-off switch weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the MP40970-1?\u003c\/strong\u003e The MP40970-1 measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP40970-1 a genuine Sierra part?\u003c\/strong\u003e Yes, the MP40970-1 is a genuine Sierra emergency cut-off switch, not a generic substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the MP40970-1 made?\u003c\/strong\u003e The MP40970-1 emergency cut-off switch is manufactured in the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the MP40970-1 fit any boat's kill switch circuit?\u003c\/strong\u003e The MP40970-1's 4-terminal design allows it to be wired into either a normally open or normally closed circuit, making it adaptable to different ignition wiring setups; no specific make or engine fitment is listed for it.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457435355,"sku":"SIE-MP40970-1","price":25.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MP40970-1__70941.1722502146.500.750.jpg?v=1785188045"},{"product_id":"sierra-mp41070-2-marine-ignition-switch-3-position-off-run-start-push-to-choke-for-mercury-control-box-applications","title":"Sierra MP41070-2 Push to Choke 3-Position Ignition Switch for Mercury Control Boxes, White","description":"\u003cp\u003eThe Sierra MP41070-2 is a 3-position ignition switch (Off-Run-Start) built for push to choke Mercury control box applications. It is designed as a panel-mount replacement switch for boats using Mercury control boxes, giving reliable ignition and choke control from a single compact unit. The switch body is molded from polyester for resistance to the moisture and vibration common in a marine engine compartment, and it terminates in 6 color coded wire leads that are potted for a sealed, corrosion-resistant connection. The wire lead colors match factory color codes, so the switch wires up to the existing harness without guesswork.\u003c\/p\u003e\u003cp\u003eSierra MP41070-2 is a short length switch rated for a maximum panel thickness of 5\/8 inch and mounts through a 7\/8 inch hole. It secures with a hex black plastic face nut, and no back up nut is required for installation, simplifying the swap for a boat owner or technician working from the front of the panel. Electrically, the switch is rated for 15 Amps at 12 Volts DC on the ignition circuit and 30 Amps at 12 Volts DC on the solenoid circuit, matching the demands of a cranking circuit on gasoline marine engines. The white finish matches common Mercury dash and control box color schemes. This switch is intended for push to choke Mercury control box setups specifically, so confirm your control box uses this configuration before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP41070-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Push to Choke \/ Mercury Control Box Applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e Short, 5\/8 inch maximum panel thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e 6 Color Coded Wire Leads\/Potted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Up Nut:\u003c\/strong\u003e Not Required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Nut:\u003c\/strong\u003e Hex black plastic face nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Size:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Rating:\u003c\/strong\u003e 15 Amps at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolenoid Rating:\u003c\/strong\u003e 30 Amps at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 3-Position (Off-Run-Start)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury push to choke control box applications\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers available\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra MP41070-2 fit?\u003c\/strong\u003e The MP41070-2 is built for push to choke Mercury control box applications, replacing the ignition switch used in that setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a 2-position or 3-position switch?\u003c\/strong\u003e MP41070-2 is a 3-position switch with Off-Run-Start positions, giving a single switch for both ignition and starting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the MP41070-2 switch?\u003c\/strong\u003e It is finished in white, matching common Mercury dash and control box color schemes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum panel thickness for installation?\u003c\/strong\u003e The Sierra MP41070-2 is a short length switch rated for a maximum panel thickness of 5\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole does this switch need?\u003c\/strong\u003e MP41070-2 mounts through a 7\/8 inch hole in the dash or control panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a back up nut to install this switch?\u003c\/strong\u003e No, a back up nut is not required for the MP41070-2; it secures with a hex black plastic face nut on the front of the panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many wire leads does the MP41070-2 have and are they marked?\u003c\/strong\u003e The switch has 6 color coded wire leads that are potted, and the lead colors match factory color codes for straightforward wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage is the MP41070-2 rated for?\u003c\/strong\u003e The ignition circuit is rated 15 Amps at 12 Volts DC and the solenoid circuit is rated 30 Amps at 12 Volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the switch housing made from?\u003c\/strong\u003e The Sierra MP41070-2 housing is made from polyester, chosen for durability in a marine engine compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP41070-2 weigh?\u003c\/strong\u003e The Sierra MP41070-2 ignition switch weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra MP41070-2 equivalent to the original Mercury switch?\u003c\/strong\u003e Sierra manufactures the MP41070-2 to meet or exceed the specifications of the original equipment ignition switch it replaces in push to choke Mercury control box applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the MP41070-2 work with any boat control box?\u003c\/strong\u003e MP41070-2 is designed specifically for push to choke Mercury control box applications, so it should be matched to that control box configuration rather than used as a universal switch.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457500891,"sku":"SIE-MP41070-2","price":30.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__02285.1753840686.500.750.jpg?v=1785188062"},{"product_id":"ignition-switch-for-suzuki-2-4-stroke-outboards-replaces-oem-37110-99e00-sierra-mp51030","title":"Sierra MP51030 Ignition Switch, Replaces 61B-82510-01-00, Yamaha Dash Mount 2 Stroke Dual Engine","description":"\u003cp\u003eThe Sierra MP51030 is a dash mount ignition switch built for Yamaha 2 stroke dual engine outboard applications. It uses heavy duty potted construction to resist moisture and vibration in the marine environment, and is suited to DFI, EFI, and MPI engines. The switch features a molded umbrella type key and a Deutsch Dt connector, and the wire colors match factory color codes so it wires in without guesswork during installation or replacement of a worn or failing factory switch.\u003c\/p\u003e\u003cp\u003eThis clamshell-packaged unit (MP51030) is also available as MP51032 in bulk 100 pieces per carton for shops and installers handling multiple dual engine Yamaha setups. Whether replacing a cracked switch body, a key that no longer turns cleanly, or restoring reliable ignition operation, this switch is designed to install as a direct fit for the dash mount dual engine configuration it is built for.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP51030\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Yamaha Outboard Ignition Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Dash Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Application:\u003c\/strong\u003e Dual Engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Compatibility:\u003c\/strong\u003e 2 Stroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Engine Types:\u003c\/strong\u003e DFI, EFI, MPI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Deutsch Dt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Type:\u003c\/strong\u003e Molded Umbrella\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Color Coding:\u003c\/strong\u003e Matches factory color codes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.12 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Clamshell (single unit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282229788\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Yamaha outboards using a dash mount, dual engine, 2 stroke ignition switch configuration.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e61B-82510-01-00\u003c\/li\u003e\n\u003cli\u003e61B-82510-00-00\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra MP51030 ignition switch fit?\u003c\/strong\u003e The MP51030 fits Yamaha outboards using a dash mount configuration for dual engine, 2 stroke ignition switch setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP51030 an exact OEM replacement?\u003c\/strong\u003e Yes, the MP51030 is built as a direct OEM replacement, matching the factory wiring and wire color codes for a straightforward swap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the MP51030 replace?\u003c\/strong\u003e It replaces OEM numbers 61B-82510-01-00 and 61B-82510-00-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the MP51030?\u003c\/strong\u003e Each MP51030 order includes one ignition switch unit, packaged in a clamshell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the MP51030 ignition switch?\u003c\/strong\u003e The switch measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP51030 ignition switch weigh?\u003c\/strong\u003e It weighs 0.12 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of key does the MP51030 use?\u003c\/strong\u003e A molded umbrella type key is used with the MP51030 ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connector type does the MP51030 have?\u003c\/strong\u003e The MP51030 uses a Deutsch Dt connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP51030 compatible with DFI, EFI, and MPI engines?\u003c\/strong\u003e Yes, the MP51030 ignition switch is suited to DFI, EFI, and MPI engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP51030 work with both 2 stroke and 4 stroke engines?\u003c\/strong\u003e The MP51030 is designed for Yamaha 2 stroke dual engine dash mount applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the wire colors on the MP51030 match the factory harness?\u003c\/strong\u003e Yes, the colors on the MP51030's wires match factory color codes for easy hookup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bulk packaging option available for this switch?\u003c\/strong\u003e Yes, the same ignition switch is available as MP51032 in bulk packs of 100 pieces per carton, while MP51030 is the single clamshell-packaged unit.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457566427,"sku":"SIE-MP51030","price":101.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-MP51030__86489.1558187482.500.750.jpg?v=1785189208"},{"product_id":"marine-ignition-switch-for-mercury-magneto-outboards-3-position-off-run-start-push-to-choke-replaces-87-88107a5-sierra-mp51010","title":"Sierra Ignition Switch MP51010 - Replaces 37110-99E00 - Suzuki 2 \u0026 4 Stroke Outboards","description":"\u003cp\u003eThe Sierra MP51010 is a keyed ignition switch built for Suzuki 2 and 4 stroke outboard engines. It serves as the primary start\/run control at the helm, completing the circuit that energizes the ignition system when the key is turned. The switch uses a molded umbrella-style cover over the wiring connections, shielding the terminals from spray, rain, and humidity in the open-boat environment where these switches are typically panel-mounted. Internally, the switch uses copper contacts in a normally open, 1-way circuit configuration, paired with a Molex-style pin and socket connector for a secure plug-in fit. A key detail for installers: the colors on the switch's wire leads match the factory color codes used on Suzuki wiring harnesses, so the switch can be wired in without having to trace or relabel circuits. The housing is white to match typical outboard control housings. This switch is designed to meet or exceed the performance of the original equipment part it replaces, and it directly replaces Suzuki OEM part number 37110-99E00. It is sold individually under part number MP51010; a bulk carton option is also offered under a separate part number for buyers who need higher quantities. Whether repairing a no-start condition caused by a worn or failed ignition switch, or performing routine electrical maintenance on a Suzuki outboard, this switch provides a factory-matched, drop-in replacement.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP51010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Ignition Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Electronic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 1-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Molex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal:\u003c\/strong\u003e Pin\/Socket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Copper (contacts)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1.5 x 5.12 x 9.06 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 22.606 cm x 13.462 cm x 5.08 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.11 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Taiwan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282229764\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSuzuki 2 and 4 stroke outboards\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e37110-99E00\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does the Sierra MP51010 ignition switch replace?\u003c\/strong\u003e The MP51010 replaces Suzuki OEM part number 37110-99E00, so it can be installed as a direct substitute for that original switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the MP51010 ignition switch fit?\u003c\/strong\u003e This switch is designed for Suzuki 2 and 4 stroke outboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP51010 a genuine Suzuki part or an aftermarket switch?\u003c\/strong\u003e MP51010 is a Sierra-brand aftermarket ignition switch engineered to meet or exceed the performance of the original Suzuki equipment it replaces, not a Suzuki-branded part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the switch contacts made of?\u003c\/strong\u003e The MP51010 ignition switch uses copper contacts in a normally open, 1-way circuit configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the wiring match my Suzuki outboard's existing harness colors?\u003c\/strong\u003e Yes, the wire leads on the MP51010 are color coded to match the factory color codes used on Suzuki wiring, which simplifies installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP51010 have any weatherproofing?\u003c\/strong\u003e It uses a molded umbrella-style cover over the connection area to help protect the wiring from moisture and spray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connector type is used on the MP51010?\u003c\/strong\u003e The switch terminates in a Molex-style pin and socket connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP51010 ignition switch weigh?\u003c\/strong\u003e The Sierra MP51010 ignition switch weighs 0.11 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the MP51010 switch mounted?\u003c\/strong\u003e It is a panel-mount ignition switch, intended to be installed into a helm or dash panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the MP51010 switch housing?\u003c\/strong\u003e The housing is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the MP51010 manufactured?\u003c\/strong\u003e The Sierra MP51010 ignition switch is made in Taiwan.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy the MP51010 ignition switch in bulk?\u003c\/strong\u003e Yes, in addition to the individually packaged MP51010, the same switch is offered in a bulk carton under a separate part number for buyers who need higher quantities.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457599195,"sku":"SIE-MP51010","price":63.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-MP51010__95029.1558187476.500.750.jpg?v=1785189078"},{"product_id":"sierra-mp39760-marine-ignition-switch-3-position-magneto-off-run-start-with-push-to-choke-replaces-omc-393301-for-johnson-evinrude-outboards","title":"Sierra MP39760 3-Position Magneto Ignition Switch, Off-Run-Start, White, OMC 393301 Equivalent","description":"\u003cp\u003eThe Sierra MP39760 is a 3-position magneto ignition switch built for marine control panels, cycling between Off, Run, and Start positions. It is constructed of polyester with a black plastic hex face nut and a plastic back up nut, and it mounts through a 7\/8 inch panel hole in panels up to 5\/8 inch thick. Electrical connections are made through 5 screw tab terminals plus 1 boss screw terminal, and the switch is rated for 15 Amps at 12 Volts DC on the ignition circuit and 30 Amps at 12 Volts DC on the solenoid circuit, giving it enough capacity to handle both ignition and starter solenoid switching duties on a single panel switch.\u003c\/p\u003e\u003cp\u003eThis switch is finished in white and cross-references to OMC 393301, making it a straightforward replacement for boat owners and technicians who need to swap out a worn or failing magneto ignition switch without hunting down obsolete OEM part numbers. Its screw tab and boss screw terminal layout is designed for simple panel wiring, and the compact 7\/8 inch mounting hole matches standard marine dash and panel cutouts.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP39760\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e 3 Position Magneto Ignition Switch (Off-Run-Start)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Thickness:\u003c\/strong\u003e 5\/8 inch maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e 5 Screw Tab, 1 Boss Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Up Nut:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Nut:\u003c\/strong\u003e Hex black plastic face nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Size:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Rating:\u003c\/strong\u003e 15 Amps at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolenoid Rating:\u003c\/strong\u003e 30 Amps at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1.62 x 4.87 x 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.23 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOMC 393301\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat positions does the Sierra MP39760 ignition switch have?\u003c\/strong\u003e The Sierra MP39760 is a 3-position magneto switch that cycles through Off, Run, and Start positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mounting hole size for the MP39760 switch?\u003c\/strong\u003e The MP39760 requires a 7\/8 inch mounting hole and fits panels up to 5\/8 inch thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra MP39760 an equivalent to an OMC part number?\u003c\/strong\u003e Yes, the MP39760 cross-references to OMC 393301, so it can be used as a replacement for that OEM number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra MP39760 ignition switch made of?\u003c\/strong\u003e The switch body is polyester, with a black plastic hex face nut and a plastic back up nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the MP39760 ignition switch?\u003c\/strong\u003e This ignition switch is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the wires connected to the MP39760 switch?\u003c\/strong\u003e Terminal connections on the MP39760 are made through 5 screw tab terminals plus 1 boss screw terminal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage rating of the Sierra MP39760?\u003c\/strong\u003e The MP39760 is rated for 15 Amps at 12 Volts DC on the ignition circuit and 30 Amps at 12 Volts DC on the solenoid circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP39760 ignition switch weigh?\u003c\/strong\u003e The Sierra MP39760 weighs 0.23 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the MP39760 switch?\u003c\/strong\u003e Item dimensions for the MP39760 are 1.62 x 4.87 x 7 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Sierra MP39760 handle both ignition and starter solenoid switching?\u003c\/strong\u003e Yes, its dual rating of 15 Amps for ignition and 30 Amps for the solenoid circuit at 12 Volts DC allows the MP39760 to switch both loads from a single panel switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP39760 include mounting hardware?\u003c\/strong\u003e The MP39760 comes with a plastic back up nut and a black plastic hex face nut for panel mounting.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457631963,"sku":"SIE-MP39760","price":22.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MP39760__32292.1722505653.500.750.jpg?v=1785188062"},{"product_id":"sierra-mp52000-marine-ignition-switch-3-position-magneto-off-run-start-push-to-choke-replaces-mercury-87-17009a5","title":"Sierra MP52000 3-Position Magneto Ignition Switch, Off-Run-Start, Push to Choke, Replaces Mercury 87-17009A5","description":"\u003cp\u003eThe Sierra MP52000 is a 3-position magneto ignition switch built for marine engines that use an off-run-start switching arrangement with a push-to-choke function. It is designed as a direct equivalent for the Mercury 87-17009A5 switch, making it a straightforward replacement when an original switch fails or needs upgrading. The switch operates on a 12-volt electrical system and uses a normally-open contact design with six color-coded wire leads that are potted for protection against moisture and vibration, a common failure point in marine environments.\u003c\/p\u003e\u003cp\u003eConstruction is polyester and plastic, with a hex black plastic face nut for panel mounting and no back-up nut required, simplifying installation from the front side of the dash or console. The switch is short in length, requiring only 5\/8 inch of maximum panel thickness, which allows it to fit tight helm layouts. Contact points are stainless steel for corrosion resistance in the marine setting. Sierra manufactures this switch to meet or exceed the performance of the original equipment part it replaces, and Sierra supplies OEM engine manufacturers and boat builders with parts on a daily basis.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP52000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e 3-Position Magneto Ignition Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Positions:\u003c\/strong\u003e Off-Run-Start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Function:\u003c\/strong\u003e Push to Choke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e 6 Color Coded Wire Leads, Potted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester, Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Nut:\u003c\/strong\u003e Hex Black Plastic Face Nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Up Nut:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Panel Thickness:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.39 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for marine vehicles with 12-volt electrical systems and standard ignition switch connections.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury 87-17009A5\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra MP52000 replace?\u003c\/strong\u003e The Sierra MP52000 is a direct replacement for the Mercury 87-17009A5 ignition switch, so it can be installed anywhere that Mercury part is called for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many positions does this ignition switch have?\u003c\/strong\u003e It has 3 positions: Off, Run, and Start, with a push-to-choke function built into the switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the MP52000 ignition switch rated for?\u003c\/strong\u003e It is rated for 12-volt marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the MP52000 made of?\u003c\/strong\u003e The switch body is constructed of polyester and plastic, with a hex black plastic face nut and stainless steel contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much panel thickness does the MP52000 require for mounting?\u003c\/strong\u003e A maximum of 5\/8 inch of panel thickness is needed, and the switch does not require a back-up nut for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the terminal connections on this switch?\u003c\/strong\u003e The Sierra MP52000 uses 6 color coded wire leads that are potted for protection in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP52000 an OEM part or aftermarket?\u003c\/strong\u003e It is a Sierra-branded aftermarket switch engineered to meet or exceed the performance of the original Mercury 87-17009A5 it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sierra MP52000 switch?\u003c\/strong\u003e Item dimensions are 0.39 x 0.39 x 0.39 inches, and the switch weighs 0.39 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the MP52000 ignition switch?\u003c\/strong\u003e It is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP52000 fit a specific boat make or engine year?\u003c\/strong\u003e The switch is a universal fit for marine vehicles with 12-volt electrical systems and standard ignition switch connections, rather than being limited to one boat make or model year.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the contacts on the MP52000 corrosion resistant?\u003c\/strong\u003e Yes, the contact material is stainless steel, which resists the corrosion common in marine ignition switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bulk pack version of the MP52000 available?\u003c\/strong\u003e The MP52000 is the individual unit version of this Sierra 3-position magneto ignition switch.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457730267,"sku":"SIE-MP52000","price":52.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-MP52000__83161.1722350737.500.750.jpg?v=1785188158"},{"product_id":"mercury-3-position-ignition-switch-for-outboards-replaces-87-17009a5-push-to-choke-magneto-off-run-start-mp51090","title":"Sierra MP51090 3-Position Ignition Switch, Push to Choke, Replaces Mercury 87-17009A5","description":"\u003cp\u003eThe Sierra MP51090 is a 3-position magneto ignition switch built for marine engines, covering the OFF-RUN-START sequence with a PUSH to Choke function for cold starts. It uses heavy duty potted construction to seal out moisture and vibration in the harsh marine environment, and is engineered with minimal bleed per circuit to keep electrical draw low across each contact path. The switch includes a molded umbrella type key, a durable design that resists the wear common to standard metal ignition keys on a boat's dash. Rated for 12 volt systems, it operates as a normally open, 3-way circuit switch with screw terminal connections for a secure wiring hookup, and is controlled by a push button actuator at the panel. The switch body is finished in white and built from polyester material with copper contacts, and it carries an IP54 ingress protection rating against dust and splashing water, an important spec for switches mounted on an open helm or console. It is designed for panel mounting and fits a standard 1 x 1 x 1 inch cutout footprint. This switch replaces Mercury outboard ignition switch 87-17009A5, making it a straightforward swap for boat owners repairing or upgrading a worn or failed OFF-RUN-START ignition switch on their console.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP51090\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Ignition Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositions:\u003c\/strong\u003e 3 Position Magneto - OFF-RUN-START\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoke Function:\u003c\/strong\u003e Push to Choke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 3-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw Terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Method:\u003c\/strong\u003e Push Button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Ignition\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Heavy duty potted construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Type:\u003c\/strong\u003e Molded umbrella type key\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 1 x 1 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282269067\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 12 volt marine ignition systems using a standard 1 x 1 x 1 inch panel-mount 3-position magneto switch.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury 87-17009A5\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra MP51090 replace?\u003c\/strong\u003e The MP51090 replaces Mercury ignition switch 87-17009A5, so it is a direct swap for that Mercury part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many positions does this ignition switch have?\u003c\/strong\u003e It is a 3-position magneto switch with OFF-RUN-START positions and a PUSH to Choke function for cold starts, part number MP51090.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the MP51090 ignition switch rated for?\u003c\/strong\u003e 12 volts. The switch is built for standard 12 volt marine ignition circuits with a normally open, 3-way contact configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the MP51090 switch?\u003c\/strong\u003e White. The Sierra MP51090 ignition switch has a white finish designed to mount into a standard helm or dash panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size cutout does the MP51090 need?\u003c\/strong\u003e The switch measures 1 x 1 x 1 inches, matching a standard panel-mount ignition switch cutout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP51090 waterproof?\u003c\/strong\u003e It carries an IP54 ingress protection rating, meaning it is protected against dust and splashing water, and uses heavy duty potted construction to seal out moisture in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the MP51090 switch made of?\u003c\/strong\u003e The switch body is made of polyester with copper contacts for reliable electrical conductivity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the MP51090 connect to the wiring harness?\u003c\/strong\u003e It uses screw terminal connectors, allowing wires to be secured directly to the switch terminals rather than a plug connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the umbrella type key on the MP51090?\u003c\/strong\u003e The MP51090 includes a molded umbrella type key, a plastic-headed ignition key designed to hold up to repeated marine use better than a standard metal key.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP51090 ignition switch weigh?\u003c\/strong\u003e The Sierra MP51090 weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP51090 include a choke function?\u003c\/strong\u003e Yes, the MP51090 is a PUSH to Choke design, meaning pushing the key activates the choke circuit alongside the OFF-RUN-START positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra MP51090?\u003c\/strong\u003e The Sierra MP51090 ignition switch is listed under UPC 808282269067.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457763035,"sku":"SIE-MP51090","price":44.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-MP51090__41795.1558187491.500.750.jpg?v=1785188325"},{"product_id":"sierra-mp40990-marine-coiled-safety-lanyard-for-emergency-cut-off-kill-switch-universal-fit","title":"Sierra MP40990 Coiled Lanyard for 4-Terminal Emergency Cut-Off Switches","description":"\u003cp\u003eThe Sierra MP40990 is a coiled replacement lanyard built for use with 4-terminal emergency cut-off switches, the type that let you select a normally open or normally closed circuit. The coiled design keeps the cord compact and out of the way at the helm while still stretching to reach the operator, and it retracts back into shape once released so it does not trail loosely around the console. As a dedicated replacement part, it lets you restore a worn or lost lanyard on a compatible cut-off switch without replacing the entire switch assembly.\u003c\/p\u003e\u003cp\u003eThe lanyard is finished in white and is supplied as a single unit. It is sized specifically for switches that call for the MP40990 lanyard; other Sierra cut-off switch models use a different lanyard part number, so confirming the correct lanyard for your specific switch before ordering will ensure proper fit and function.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MP40990\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Coiled Lanyard for Emergency Cut-Off Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 6.096 L x 17.272 H x 9.144 W (centimeters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282367206\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Switch Type:\u003c\/strong\u003e 4-terminal emergency cut-off switch (normally open or normally closed circuit selectable)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra MP40990 used for?\u003c\/strong\u003e The Sierra MP40990 is a coiled replacement lanyard used with emergency cut-off switches, letting the operator restore the safety cord on the switch without replacing the whole switch assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the MP40990 fit any emergency cut-off switch?\u003c\/strong\u003e MP40990 is sized for switches that specifically call for the MP40990 lanyard; it is designed for 4-terminal emergency cut-off switches that allow selection of a normally open or normally closed circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP40990 lanyard the same as the MP40980 lanyard?\u003c\/strong\u003e No, MP40990 and MP40980 are different Sierra lanyard part numbers made for different cut-off switch models, so they are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the MP40990 coiled lanyard?\u003c\/strong\u003e The MP40990 lanyard is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MP40990 lanyard weigh?\u003c\/strong\u003e The MP40990 coiled lanyard weighs 0.13 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra MP40990 lanyard?\u003c\/strong\u003e The UPC for the Sierra MP40990 coiled lanyard is 808282367206.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many lanyards come in a package?\u003c\/strong\u003e The MP40990 is sold as a single coiled lanyard, one unit per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MP40990 a genuine Sierra part or an aftermarket copy?\u003c\/strong\u003e MP40990 is a Sierra-branded part, manufactured to meet or exceed the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MP40990 lanyard have a clip to attach to the switch?\u003c\/strong\u003e The MP40990 is supplied as the coiled lanyard cord itself, intended for use with a compatible 4-terminal emergency cut-off switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the MP40990 lanyard?\u003c\/strong\u003e The MP40990 ships in a package measuring 6.096 L x 17.272 H x 9.144 W in centimeters.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988457795803,"sku":"SIE-MP40990","price":14.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__62472.1753840685.500.750.jpg?v=1785188255"},{"product_id":"sierra-un12140-marine-ignition-switch-acc-off-run-start-4-terminal-die-cast-zinc-9-16in-panel-mount","title":"Sierra International UN12140 Ignition Switch, 4-Position Acc-Off-Run-Start, Die Cast Zinc","description":"\u003cp\u003eThe Sierra International UN12140 is a 4-position marine ignition switch built for panel mounting on boats, offering Accessory, Off, Run, and Start positions in a single die cast zinc housing. It is designed as a direct panel-mount replacement switch for helm stations that need a compact, short-body switch where panel thickness is limited, since it is built to a maximum panel thickness of 5\/8 inch.\u003c\/p\u003e\u003cp\u003eThe switch body and back up nut are both die cast zinc for corrosion resistance and durability in a marine environment, while the face nut is a knurled chrome finish that gives a clean, gripped appearance and allows for hand-tightening during installation. Electrical connections are made through a 4-threaded stud terminal type, and the switch is rated for 15 Amps at 12 Volts DC on the ignition circuit, 30 Amps at 12 Volts DC on the solenoid circuit, and 15 Amps at 12 Volts DC on the accessory circuit, making it suitable for standard 12 volt marine ignition and starting circuits.\u003c\/p\u003e\u003cp\u003eMounting requires a 9\/16 inch hole. This is a universal panel-mount switch not tied to a specific engine or boat make, so it fits any helm or dash panel that meets the hole size and panel thickness requirements above.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra International\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e UN12140\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Ignition Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Positions:\u003c\/strong\u003e Accessory-Off-Run-Start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Up Nut Material:\u003c\/strong\u003e Die Cast Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Nut:\u003c\/strong\u003e Knurled Chrome Face Nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e 4-Threaded Stud\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Thickness:\u003c\/strong\u003e Short, 5\/8 inch maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Size:\u003c\/strong\u003e 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Rating:\u003c\/strong\u003e 15 Amps at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolenoid Rating:\u003c\/strong\u003e 30 Amps at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessory Rating:\u003c\/strong\u003e 15 Amps at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.39 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282374150\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat positions does the UN12140 ignition switch have?\u003c\/strong\u003e The Sierra International UN12140 has 4 positions: Accessory, Off, Run, and Start.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UN12140 switch made of?\u003c\/strong\u003e Die cast zinc is used for both the switch body and the back up nut on the UN12140, with a knurled chrome face nut for the visible front finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole do I need to drill for this switch?\u003c\/strong\u003e A 9\/16 inch hole is required to mount the Sierra International UN12140 ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick of a panel can the UN12140 be installed in?\u003c\/strong\u003e This is a short-body switch rated for a maximum panel thickness of 5\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat terminal type does the UN12140 use for wiring?\u003c\/strong\u003e The UN12140 uses a 4-threaded stud terminal type for its electrical connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the amperage ratings of the UN12140 ignition switch?\u003c\/strong\u003e It is rated 15 Amps at 12 Volts DC on ignition, 30 Amps at 12 Volts DC on solenoid, and 15 Amps at 12 Volts DC on accessory circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the UN12140 fit a specific boat make or engine?\u003c\/strong\u003e No specific make, engine, or model is required; the UN12140 is a universal panel-mount switch that fits any dash panel meeting its 9\/16 inch hole size and 5\/8 inch maximum panel thickness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the UN12140 ignition switch weigh?\u003c\/strong\u003e The Sierra International UN12140 weighs 0.39 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish is the face nut on the UN12140?\u003c\/strong\u003e The face nut is a knurled chrome finish, providing grip for hand-tightening and a clean appearance on the dash.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the UN12140 a conventional ignition switch?\u003c\/strong\u003e Yes, the Sierra International UN12140 is a conventional 4-position Accessory-Off-Run-Start ignition switch.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988458156251,"sku":"SIE-UN12140","price":22.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-un12140_lg__13425.1558131618.500.750.jpg?v=1785188951"},{"product_id":"sea-dog-420350-1-three-position-ignition-switch-off-ignition-start-13-16-in-brass-marine-boat-switch","title":"Sea-Dog 420350-1 Three Position Ignition Switch, Off-Ignition-Start, 13\/16 Inch Long Shaft, Stamped Brass","description":"\u003cp\u003eThe Sea-Dog 420350-1 is a three position ignition switch built for off, ignition, and start functions on a boat's helm or dash panel. It uses a 13\/16 inch diameter long shaft designed for panels up to 1-1\/8 inch thick, so it drops into standard marine dash cutouts without modification. Electrical connection is made through three screw terminals, with an ignition circuit rated 15 Amps at 12 Volts DC and a solenoid (start) circuit rated 30 Amps at 12 Volts DC, giving it enough capacity to handle both accessory ignition load and cranking the starter solenoid directly. The switch body is constructed of stamped brass for corrosion resistance in a marine environment, and it ships with two keys so the boat owner has an immediate spare. This version does not include a rubber weatherproof boot over the switch cap; Sea-Dog also offers the 420355-1, an otherwise identical switch that does include the rubber boot, as a separate part number for installations that need extra splash protection. A blank replacement key is also available separately for this switch line. This is a panel-mount switch intended for helm consoles, so it is a straightforward swap for any three-terminal, three position ignition switch of the same shaft and panel specifications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420350-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Three Position Ignition Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAction:\u003c\/strong\u003e Off-Ignition-Start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Type:\u003c\/strong\u003e Long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Diameter:\u003c\/strong\u003e 13\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Panel Thickness:\u003c\/strong\u003e 1-1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e 3 screw terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Circuit Rating:\u003c\/strong\u003e 15 Amps at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolenoid Circuit Rating:\u003c\/strong\u003e 30 Amps at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber Boot Cap:\u003c\/strong\u003e No (boot version available as a separate part, Sea-Dog 420355-1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeys Included:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.404 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514423595\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal panel-mount ignition switch; fits any dash or helm panel up to 1-1\/8 inch thick with a 13\/16 inch shaft cutout and three-screw-terminal wiring.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo specific OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat functions does the Sea-Dog 420350-1 ignition switch have?\u003c\/strong\u003e It is a three position switch covering off, ignition, and start functions, controlled through a single 13\/16 inch diameter long shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum panel thickness for this switch?\u003c\/strong\u003e The Sea-Dog 420350-1 is rated for panels up to 1-1\/8 inch thick, matching its long shaft length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many electrical terminals does the 420350-1 have?\u003c\/strong\u003e Three screw terminals provide the electrical connection for this ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage can the ignition and solenoid circuits handle?\u003c\/strong\u003e The ignition circuit is rated 15 Amps at 12 Volts DC, and the solenoid (start) circuit is rated 30 Amps at 12 Volts DC on the Sea-Dog 420350-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch come with a rubber boot?\u003c\/strong\u003e No, the 420350-1 does not include a rubber boot cap. Sea-Dog makes a boot-equipped version under a different part number, 420355-1, for buyers who need that extra sealing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 420350-1 made of?\u003c\/strong\u003e The switch body is constructed of stamped brass, chosen for its resistance to corrosion in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many keys are included with the switch?\u003c\/strong\u003e Two keys ship with the Sea-Dog 420350-1 ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I get a spare key for this switch later?\u003c\/strong\u003e Yes, a blank replacement key is available as a separate part in the Sea-Dog ignition switch line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 420350-1 ignition switch weigh?\u003c\/strong\u003e The Sea-Dog 420350-1 weighs 0.404 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 420350-1 the same as the magneto-style Sea-Dog ignition switch?\u003c\/strong\u003e No, the magneto-style version is a different part with five screw terminals; the 420350-1 is the standard three-terminal off-ignition-start switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this switch fit any boat dash panel?\u003c\/strong\u003e The Sea-Dog 420350-1 is a universal panel-mount switch that fits any dash cutout sized for a 13\/16 inch shaft and panel thickness up to 1-1\/8 inch, without being tied to a specific boat make or engine.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988774301915,"sku":"S-D-420350-1","price":32.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4985.jpg?v=1784429264"},{"product_id":"sea-dog-420365-1-three-position-ignition-switch-off-ignition-start-13-16-long-shaft-3-screw-terminals-with-rubber-boot","title":"Sea-Dog 420365-1 Three Position Ignition Switch, Long Shaft, Off-Ignition-Start, with Cap","description":"\u003cp\u003eThe Sea-Dog 420365-1 is a three position ignition switch built for off, ignition, and start functions on a boat's 12-volt electrical system. It uses a 13\/16 inch diameter shaft in the long shaft configuration, fitting panels up to 1-1\/8 inch thick, and connects through three screw terminals for a secure electrical connection. This version comes with a cap for added protection at the panel face.\u003c\/p\u003e\u003cp\u003eIgnition circuit rating is 15A at 12VDC and the solenoid circuit is rated 30A at 12VDC, covering both the ignition feed and the starter solenoid trigger in a single switch. The switch body is constructed of polypropylene for corrosion resistance in the marine environment, and it includes two keys so a spare is on hand from the start.\u003c\/p\u003e\u003cp\u003eThis is a panel-mount switch intended for helm installation where an off-ignition-start function is required with a long shaft and three screw terminals. Sea-Dog also offers a short shaft version (maximum panel thickness 5\/8 inch) and versions without the cap under separate part numbers, so confirm panel thickness and terminal style before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420365-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Function:\u003c\/strong\u003e Off-Ignition-Start (3 position)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Diameter:\u003c\/strong\u003e 13\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Type:\u003c\/strong\u003e Long shaft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Panel Thickness:\u003c\/strong\u003e 1-1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e 3 screw terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Rating:\u003c\/strong\u003e 15A at 12VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolenoid Rating:\u003c\/strong\u003e 30A at 12VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeys Included:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3.88 x 7.88 x 2.13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat functions does the Sea-Dog 420365-1 ignition switch support?\u003c\/strong\u003e The 420365-1 is a three position switch covering off, ignition, and start, letting one switch handle both ignition power and the starter solenoid trigger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the long shaft or short shaft version?\u003c\/strong\u003e This is the long shaft version of the Sea-Dog 420365-1, with a maximum panel thickness of 1-1\/8 inch; a short shaft version rated for panels up to 5\/8 inch is available under a different Sea-Dog part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 420365-1 include a cap?\u003c\/strong\u003e Yes, the Sea-Dog 420365-1 includes a cap, distinguishing it from the equivalent version without a cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the shaft diameter on this switch?\u003c\/strong\u003e The shaft diameter on the Sea-Dog 420365-1 ignition switch is 13\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does this ignition switch have?\u003c\/strong\u003e The 420365-1 connects through three screw terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the electrical ratings of the Sea-Dog 420365-1?\u003c\/strong\u003e This switch is rated 15A at 12VDC on the ignition circuit and 30A at 12VDC on the solenoid circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the switch body made of?\u003c\/strong\u003e The Sea-Dog 420365-1 is constructed of polypropylene for resistance to the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many keys come with the switch?\u003c\/strong\u003e Two keys are included with the Sea-Dog 420365-1 ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this ignition switch weigh?\u003c\/strong\u003e The Sea-Dog 420365-1 weighs 0.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the switch?\u003c\/strong\u003e The 420365-1 measures 3.88 x 7.88 x 2.13 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 420365-1 and the 420366-1?\u003c\/strong\u003e The 420366-1 is the short shaft counterpart to the 420365-1, rated for panels up to 5\/8 inch thick instead of 1-1\/8 inch, with the same off-ignition-start function, three screw terminals, and cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I get a replacement cap for this switch separately?\u003c\/strong\u003e Yes, Sea-Dog offers a separate replacement cap, part number 420398-1, that fits the 420365-1 ignition switch.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988774367451,"sku":"S-D-420365-1","price":20.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4988.jpg?v=1784429267"},{"product_id":"sea-dog-420351-1-three-position-magneto-style-ignition-switch-off-ignition-start-5-screw-terminals-stamped-brass","title":"Sea-Dog Three Position Ignition Switch 420351-1, Magneto Style, Off-Ignition-Start, Stamped Brass","description":"\u003cp\u003eThe Sea-Dog 420351-1 is a three position, magneto-style ignition switch built for off, ignition, and start functions on inboard and sterndrive engines using magneto ignition. The switch is constructed of stamped brass for corrosion resistance in a marine environment and includes a five screw terminal electrical connection for wiring the ignition and solenoid (starter) circuits. Its ignition circuit is rated 15 amps at 12 volts DC, and the solenoid (start) circuit is rated 30 amps at 12 volts DC. A key detail for installers: the ignition (accessory) circuit is not activated when the key is turned to the solenoid (start) position, so accessories wired to that circuit will not draw power during cranking.\u003c\/p\u003e\u003cp\u003eThe switch uses a 13\/16 inch diameter long shaft designed for panels up to 1-1\/8 inch thick, and it does not include a cap. Two keys are included with each switch, and a blank replacement key (Sea-Dog 420399) is available separately if additional or replacement keys are needed. This switch is intended as a direct panel-mount replacement for helm stations using a magneto-style three position ignition switch of this shaft length and terminal configuration.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420351-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Three Position Ignition Switch, Magneto Style\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Positions:\u003c\/strong\u003e Off, Ignition, Start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Diameter:\u003c\/strong\u003e 13\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Type:\u003c\/strong\u003e Long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Panel Thickness:\u003c\/strong\u003e 1-1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e 5 Screw Terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap:\u003c\/strong\u003e No cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Circuit Rating:\u003c\/strong\u003e 15 Amps at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolenoid Circuit Rating:\u003c\/strong\u003e 30 Amps at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeys Included:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.414 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514423618\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for helm panels using a magneto-style three position ignition switch with a 13\/16 inch long shaft and panel thickness up to 1-1\/8 inch.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo manufacturer cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat functions does the Sea-Dog 420351-1 ignition switch have?\u003c\/strong\u003e It has three positions: off, ignition, and start, making it a magneto-style switch rather than a four-position accessory switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ignition circuit stay powered while cranking the engine?\u003c\/strong\u003e No. On the 420351-1, the ignition (accessory) circuit is not activated while the key is held in the solenoid (start) position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage rating of this switch?\u003c\/strong\u003e The ignition circuit is rated 15 amps at 12 volts DC, and the solenoid (start) circuit is rated 30 amps at 12 volts DC on the Sea-Dog 420351-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 420351-1 ignition switch made from?\u003c\/strong\u003e It is constructed of stamped brass, chosen for its corrosion resistance in marine helm applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size shaft does this switch use and what panel thickness does it fit?\u003c\/strong\u003e The 420351-1 uses a 13\/16 inch diameter long shaft designed for panels up to 1-1\/8 inch thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does the switch have for wiring?\u003c\/strong\u003e Five screw terminals are provided for the electrical connections on this Sea-Dog ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 420351-1 come with a key or cap?\u003c\/strong\u003e Two keys are included with the switch, but no cap is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I get a replacement key for this ignition switch?\u003c\/strong\u003e Yes, a blank replacement key, Sea-Dog part 420399, is available separately for the 420351-1 switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this ignition switch weigh?\u003c\/strong\u003e The Sea-Dog 420351-1 weighs 0.414 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 420351-1 and a four position ignition switch?\u003c\/strong\u003e The 420351-1 is a three position magneto-style switch (off, ignition, start), while a four position switch adds a separate accessory position; the 420351-1 does not have an accessory setting.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988774432987,"sku":"S-D-420351-1","price":32.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4986.jpg?v=1784429270"},{"product_id":"sea-dog-420355-1-three-position-ignition-switch-with-rubber-boot-cap-stamped-brass-off-ignition-start-3-screw-terminals","title":"Sea-Dog 420355-1 Three Position Brass Ignition Switch, Off-Ignition-Start, 3 Terminal with Cap","description":"\u003cp\u003eThe Sea-Dog 420355-1 is a three position ignition switch built for off, ignition, and start functions on a boat's helm or dash panel. It uses a 13\/16 inch diameter long shaft designed to fit through panels up to 1-1\/8 inch thick, making it a straightforward replacement or upgrade for helm stations that need a reliable start switch. Electrical connection is made through three screw terminals, with the switch rated for 15 amps at 12 volts DC on the ignition circuit and 30 amps at 12 volts DC on the solenoid circuit, covering the demands of cranking an engine and running ignition-side accessories.\u003c\/p\u003e\u003cp\u003eThis switch is constructed of stamped brass for corrosion resistance and long service life in a marine environment, and it comes with a protective cap fitted over the switch face to help keep water and spray out of the terminal area. Two keys are included with every switch, and a blank replacement key (Sea-Dog 420399) is available separately if a spare or extra key is needed. The 420355-1 is part of Sea-Dog's three position ignition switch lineup, which also includes a version without the protective cap and a five-terminal magneto-style switch for different wiring setups.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420355-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Three Position Ignition Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Function:\u003c\/strong\u003e Off-Ignition-Start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Diameter:\u003c\/strong\u003e 13\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Type:\u003c\/strong\u003e Long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Panel Thickness:\u003c\/strong\u003e 1-1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e 3 screw terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap\/Boot:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Circuit Rating:\u003c\/strong\u003e 15 amps at 12 volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolenoid Circuit Rating:\u003c\/strong\u003e 30 amps at 12 volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeys Included:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.38 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514423601\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 420355-1 ignition switch used for?\u003c\/strong\u003e It is a three position ignition switch covering off, ignition, and start functions, used to start and control power to a boat's engine from the helm or dash panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 420355-1 come with a cap or boot?\u003c\/strong\u003e Yes, the Sea-Dog 420355-1 includes a protective cap over the switch face, unlike the companion 420350-1 version which does not have a cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shaft size and panel thickness does this switch fit?\u003c\/strong\u003e The 420355-1 has a 13\/16 inch diameter long shaft and is designed for panels up to 1-1\/8 inch thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does the Sea-Dog 420355-1 have?\u003c\/strong\u003e This switch has three screw terminals for its electrical connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the electrical ratings of this ignition switch?\u003c\/strong\u003e The Sea-Dog 420355-1 is rated for 15 amps at 12 volts DC on the ignition circuit and 30 amps at 12 volts DC on the solenoid circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 420355-1 switch made of?\u003c\/strong\u003e It is constructed of stamped brass for durability in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many keys come with the Sea-Dog 420355-1?\u003c\/strong\u003e Two keys are included with each 420355-1 ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a replacement key available for this switch?\u003c\/strong\u003e Yes, a blank replacement key, Sea-Dog part number 420399, is available separately for the 420355-1 switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 420355-1 and the 420350-1?\u003c\/strong\u003e Both are three position off-ignition-start switches with the same 13\/16 inch shaft and 3 screw terminals, but the 420355-1 includes a protective cap while the 420350-1 does not.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 420355-1 differ from Sea-Dog's magneto-style switch?\u003c\/strong\u003e The 420355-1 is a standard three position switch with 3 screw terminals, while Sea-Dog's magneto-style ignition switch (420351-1) uses 5 screw terminals and does not activate the ignition circuit in the solenoid start position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 420355-1 ignition switch weigh?\u003c\/strong\u003e The 420355-1 weighs 0.38 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 420355-1?\u003c\/strong\u003e The UPC for the Sea-Dog 420355-1 ignition switch is 035514423601.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988774498523,"sku":"S-D-420355-1","price":32.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4985_ef161825-670f-45cd-8d0c-3a8ed9d89846.jpg?v=1784429275"},{"product_id":"sea-dog-420399-blank-replacement-key-for-marine-ignition-switches-fits-420350-1-420355-1-and-420351-1","title":"Sea-Dog Blank Replacement Ignition Key 420399 for Three Position Ignition Switches","description":"\u003cp\u003eThe Sea-Dog 420399 is a blank replacement key made to work with Sea-Dog three position ignition switches, including the standard ignition-start switch and the magneto-style ignition switch. It is designed as a replacement for a lost or worn key so the ignition switch itself does not need to be replaced. The key is uncut (blank) and intended to be cut to match your existing switch, or ordered as a spare to keep on hand.\u003c\/p\u003e\u003cp\u003eSea-Dog three position ignition switches that use this key are built for off, ignition, and start functions, feature a 13\/16 inch diameter long shaft for a maximum panel thickness of 1-1\/8 inch, and are constructed of stamped brass. The switches ship standard with two keys, and this blank lets you add a spare or replace one that has been lost.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420399\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Blank replacement ignition key\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Standard Pack:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Marine ignition switches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSea-Dog three position ignition switch, off-ignition-start, 3 screw terminals (420350-1)\u003c\/li\u003e\n\u003cli\u003eSea-Dog three position ignition switch, off-ignition-start, 3 screw terminals with rubber boot (420355-1)\u003c\/li\u003e\n\u003cli\u003eSea-Dog three position magneto-style ignition switch, 5 screw terminals (420351-1)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 420399?\u003c\/strong\u003e It is a blank replacement key made for Sea-Dog three position ignition switches, sold uncut so it can be cut to match your existing switch or kept as a spare.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich ignition switches use the 420399 key?\u003c\/strong\u003e The 420399 blank key is made for the Sea-Dog three position off-ignition-start switch (420350-1), the same switch with a rubber boot (420355-1), and the Sea-Dog magneto-style ignition switch (420351-1).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 420399 key come pre-cut?\u003c\/strong\u003e No, the 420399 is a blank key and needs to be cut to match the specific ignition switch it will be used with.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many keys come with a Sea-Dog ignition switch?\u003c\/strong\u003e Sea-Dog three position ignition switches that pair with the 420399 blank key ship standard with two keys included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog ignition switch made of?\u003c\/strong\u003e The Sea-Dog three position ignition switches compatible with the 420399 key are constructed of stamped brass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the shaft size on the ignition switches this key fits?\u003c\/strong\u003e The Sea-Dog switches that use the 420399 key have a 13\/16 inch diameter long shaft, suitable for a maximum panel thickness of 1-1\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 420399 key the same for both the standard and magneto-style switches?\u003c\/strong\u003e Yes, the same 420399 blank key is listed as the replacement key for both the standard off-ignition-start switch and the magneto-style ignition switch from Sea-Dog.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 420399 key weigh?\u003c\/strong\u003e The 420399 blank replacement key weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the electrical rating of the ignition switches this key operates?\u003c\/strong\u003e The compatible Sea-Dog three position ignition switches are rated for 15A at 12VDC on the ignition circuit and 30A at 12VDC on the solenoid circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I order the 420399 key with a custom logo?\u003c\/strong\u003e Sea-Dog notes that its ignitions are available upon request with a customer logo on the keys and keyed alike for large orders; the 420399 blank key itself is the standard replacement key for these switches.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988774531291,"sku":"S-D-420399","price":2.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4985_5ab2fe72-4bc6-4921-a35f-f333dcfba730.jpg?v=1784429283"},{"product_id":"sea-dog-420375-1-four-position-ignition-switch-accessory-off-ignition-start-13-16-long-shaft-4-screw-terminals-for-marine-boats","title":"Sea-Dog Four Position Ignition Switch 420375-1, Long Shaft, 4-Screw Terminal","description":"\u003cp\u003eThe Sea-Dog 420375-1 is a four position ignition switch built for accessory, off, ignition, and start functions on a boat helm. It has a 13\/16 inch diameter long shaft, designed to pass through a panel up to 1-1\/8 inch thick, and terminates in four screw connections for wiring the ignition circuit, solenoid circuit, and accessory circuit. The switch is rated 15A at 12VDC for both the ignition and accessory positions, and 30A at 12VDC for the solenoid position, giving it enough capacity to handle a typical inboard or sterndrive cranking circuit.\u003c\/p\u003e\u003cp\u003eConstruction is polypropylene, a corrosion-resistant plastic that holds up to the marine environment better than metal switch bodies, and the screw-terminal version of this switch includes a rubber boot to help seal the back of the switch from moisture and spray. The switch ships with two keys and a cap. It is a direct helm replacement or new-install switch for boats needing a standard four position key switch with screw terminals; a four-blade-terminal version and a screw-terminal-only replacement cap are also offered separately as distinct part numbers if wiring style needs to differ.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420375-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Positions:\u003c\/strong\u003e Accessory - Off - Ignition - Start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Diameter:\u003c\/strong\u003e 13\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Length:\u003c\/strong\u003e 1-1\/8 inch (Long)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Panel Thickness:\u003c\/strong\u003e 1-1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e 4 Screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Cap:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Circuit Rating:\u003c\/strong\u003e 15 Amps at 12VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolenoid Circuit Rating:\u003c\/strong\u003e 30 Amps at 12VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessory Circuit Rating:\u003c\/strong\u003e 15 Amps at 12VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Two keys\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7.88 x 3.88 x 0.88 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.272 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514423670\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat are the four positions on the Sea-Dog 420375-1 ignition switch?\u003c\/strong\u003e The 420375-1 cycles through accessory, off, ignition, and start positions, covering the standard functions needed to power accessories, kill the circuit, run ignition, and crank the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size shaft does this switch have?\u003c\/strong\u003e It has a 13\/16 inch diameter shaft in the long configuration, measuring 1-1\/8 inch, and is rated for a maximum panel thickness of 1-1\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the terminals screw type or blade type on part number 420375-1?\u003c\/strong\u003e This version uses four screw terminals. A four-blade-terminal version of the same switch is sold separately under a different part number, so check your wiring style before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 420375-1 switch made from?\u003c\/strong\u003e Polypropylene, a plastic that resists corrosion and holds up well in a marine environment compared to metal switch housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage is the switch rated for?\u003c\/strong\u003e The ignition and accessory circuits are each rated 15 Amps at 12VDC, and the solenoid circuit is rated 30 Amps at 12VDC on the 420375-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the switch come with keys?\u003c\/strong\u003e Yes, the Sea-Dog 420375-1 includes two keys along with a cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a boot included to protect the back of the switch from water?\u003c\/strong\u003e The screw-terminal version of this switch, including the 420375-1, includes a rubber boot to help protect the terminals from moisture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this ignition switch weigh?\u003c\/strong\u003e The 420375-1 weighs 0.272 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the replacement cap part number for this switch?\u003c\/strong\u003e Sea-Dog offers part number 420398-1 as a replacement cap that fits the 420375-1 four position ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I get a replacement key for the 420375-1?\u003c\/strong\u003e Yes, a blank replacement key is available separately under part number 420399 for this four position ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the switch housing?\u003c\/strong\u003e The Sea-Dog 420375-1 has a black housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the switch?\u003c\/strong\u003e The 420375-1 measures approximately 7.88 x 3.88 x 0.88 inches.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988774662363,"sku":"S-D-420375-1","price":18.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7939.jpg?v=1784429295"},{"product_id":"sea-dog-420383-1-magneto-style-ignition-switch-push-to-choke-3-position-off-ignition-start-choke-replaces-oem-710542-for-marine-outboard-engines-with-magneto-ignition","title":"Sea-Dog 420383-1 Three Position Magneto Style Ignition Switch, Push to Choke, OEM 710542 Equivalent","description":"\u003cp\u003eThe Sea-Dog 420383-1 is a three position magneto style ignition switch built for off, ignition, start, and choke operation on a single panel-mounted switch. It uses a 13\/16 inch diameter short shaft designed for panels up to 5\/8 inch thick, making it a straightforward swap on helm and dash panels with a standard ignition switch cutout. The switch connects via six wires and is rated for 15 amps at 12VDC on the ignition circuit, 30 amps at 12VDC on the solenoid circuit, and 7 amps at 12VDC on the choke circuit, covering the electrical load of typical ignition, starter solenoid, and choke functions on a single switch.\u003c\/p\u003e\u003cp\u003eThe housing is constructed of polypropylene for corrosion resistance in a marine environment. The switch operates as push to choke, and two keys are included so the boat owner has a spare on hand from the start. A blank replacement key (Sea-Dog 420399C) is also available separately if additional or replacement keys are needed later. This switch is functionally equivalent to OEM part number 710542.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420383-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Three Position Magneto Style Ignition Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Off, Ignition, Start, Choke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Shaft Diameter:\u003c\/strong\u003e 13\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Panel Thickness:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Type:\u003c\/strong\u003e Short\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Terminals:\u003c\/strong\u003e 6 wires\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Rating:\u003c\/strong\u003e 15 amps at 12VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolenoid Rating:\u003c\/strong\u003e 30 amps at 12VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoke Rating:\u003c\/strong\u003e 7 amps at 12VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeys Included:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Push to Choke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.228 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e 710542\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a panel-mount ignition switch sized for a 13\/16 inch diameter short shaft and panels up to 5\/8 inch thick; no specific engine make, horsepower, or model fitment is listed for this switch.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e710542\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat functions does the Sea-Dog 420383-1 ignition switch have?\u003c\/strong\u003e The 420383-1 is a three position magneto style ignition switch with off, ignition, start, and choke functions in a single switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the OEM equivalent part number for the 420383-1?\u003c\/strong\u003e OEM part number 710542 is equivalent to the Sea-Dog 420383-1 ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum panel thickness this switch fits?\u003c\/strong\u003e A panel up to 5\/8 inch thick is the maximum thickness the 420383-1 short shaft is designed for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the shaft diameter on this switch?\u003c\/strong\u003e 13\/16 inch is the panel shaft diameter of the Sea-Dog 420383-1 ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many wires does the 420383-1 use for installation?\u003c\/strong\u003e Six wires connect to the 420383-1, matching its ignition, solenoid, and choke circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 420383-1 switch made of?\u003c\/strong\u003e Polypropylene housing construction is used on the 420383-1 ignition switch for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 420383-1 come with keys?\u003c\/strong\u003e Two keys are included with the Sea-Dog 420383-1 ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the amperage ratings on this switch?\u003c\/strong\u003e The 420383-1 is rated 15 amps at 12VDC for ignition, 30 amps at 12VDC for the solenoid, and 7 amps at 12VDC for the choke circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does push to choke mean on this switch?\u003c\/strong\u003e Push to choke means the choke function on the 420383-1 is engaged by pushing the switch knob in, separate from the off, ignition, and start rotary positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a replacement key available for this switch?\u003c\/strong\u003e Yes, Sea-Dog offers a blank replacement key, part number 420399C, for the 420383-1 ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 420383-1 ignition switch weigh?\u003c\/strong\u003e 0.228 pounds is the weight of the Sea-Dog 420383-1 ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 420383-1 a universal fit or specific to certain engines?\u003c\/strong\u003e The Sea-Dog 420383-1 is a panel-mount switch sized to a 13\/16 inch short shaft and 5\/8 inch max panel thickness; no specific engine model fitment is listed.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988774826203,"sku":"S-D-420383-1","price":32.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4992.jpg?v=1784429320"},{"product_id":"sea-dog-420488-1-universal-marine-kill-switch-with-lanyard-emergency-engine-cut-off-ignition-or-magneto-kill-5-8-panel-mount","title":"Sea-Dog Universal Kill Switch 420488-1, 5\/8 Inch Mounting Hole, 15 Inch Lanyard","description":"\u003cp\u003eThe Sea-Dog Universal Kill Switch, part number 420488-1, is a marine emergency cut-off switch that attaches to your life vest while operating a boat or personal watercraft. If you are thrown from the helm or move too far from the console, the coiled lanyard pulls the switch and instantly cuts battery power, stopping the engine. The switch features dual circuitry, so it can be wired for either ignition kill or magneto kill depending on your engine setup, making it a genuinely universal fit across boat and PWC ignition systems.\u003c\/p\u003e\u003cp\u003eConstruction is stamped brass and injection molded nylon and Delrin, built to hold up to a weatherproof marine environment. The included lanyard measures approximately 15 inches when coiled and stretches to about 48 inches, and should be replaced any time it becomes worn, cut, or frayed since a compromised lanyard will not reliably trip the switch. The mounting hole is 5\/8 inch in diameter, and the switch is rated for a maximum panel thickness of 3\/8 inch, so it installs into a standard helm or console cutout. Electrically, it is rated for 12 volts and a maximum draw of 5 amps. As with any kill switch, test it for proper function before each use to confirm it will cut power when needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420488-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Kill Switch - Universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKill Style:\u003c\/strong\u003e Universal (dual circuitry for ignition kill or magneto kill)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Amp Draw:\u003c\/strong\u003e 5 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Size:\u003c\/strong\u003e 7\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Panel Thickness:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLanyard Length:\u003c\/strong\u003e approximately 15 inches coiled, 48 inches stretched\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped brass and injection molded nylon and Delrin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.148 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 8 x 4 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e OFF-NONE-ON\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 2-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper Temperature Rating:\u003c\/strong\u003e 194 degrees Fahrenheit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514423762\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for boats and personal watercraft; dual circuitry allows wiring for ignition kill or magneto kill applications.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 420488-1 kill switch used for?\u003c\/strong\u003e It is a marine emergency cut-off switch, part number 420488-1, that clips to your life vest and instantly cuts battery power to the engine if you are thrown from the helm or move too far from the console.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kill switch fit my boat or personal watercraft?\u003c\/strong\u003e Yes, the Sea-Dog 420488-1 is a universal kill switch with dual circuitry, so it can be wired for either ignition kill or magneto kill depending on your engine setup, making it compatible across most boat and PWC ignition systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole does this kill switch need?\u003c\/strong\u003e The 420488-1 requires a 5\/8 inch diameter mounting hole and fits panels up to 3\/8 inch thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the lanyard on the Sea-Dog 420488-1?\u003c\/strong\u003e The lanyard measures approximately 15 inches when coiled and stretches to about 48 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and amperage is the 420488-1 kill switch rated for?\u003c\/strong\u003e This kill switch is rated for 12 volts with a maximum draw of 5 amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the kill switch made of?\u003c\/strong\u003e The 420488-1 is constructed of stamped brass and injection molded nylon and Delrin, designed to hold up in a weatherproof marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 420488-1 kill switch weigh?\u003c\/strong\u003e It weighs 0.148 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace the lanyard on my kill switch?\u003c\/strong\u003e Sea-Dog recommends replacing the lanyard on the 420488-1 kill switch any time it becomes worn, cut, or frayed, since a damaged lanyard may not reliably trip the switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kill switch work for both ignition kill and magneto kill setups?\u003c\/strong\u003e Yes, dual circuitry on the 420488-1 allows it to be wired for either ignition kill or magneto kill depending on your application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat terminal size does the 420488-1 kill switch use?\u003c\/strong\u003e The 420488-1 uses a 7\/16 inch terminal size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I test the kill switch before every use?\u003c\/strong\u003e Yes, the manufacturer states the 420488-1 kill switch should be tested for proper function before each use to make sure it will cut power when needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 420488-1 a two-position switch?\u003c\/strong\u003e Yes, it operates as a 2-way, 2-position switch with an OFF-NONE-ON operation mode.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988778528987,"sku":"S-D-420488-1","price":14.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5013.jpg?v=1784429372"},{"product_id":"sea-dog-420489-1-replacement-coiled-kill-switch-lanyard-red-fits-420486-1-420487-1-420488-1-marine-engine-cut-off-switches","title":"Sea-Dog 420489-1 Replacement Lanyard Only for Emergency Kill Switch 420488-1","description":"\u003cp\u003eThe Sea-Dog 420489-1 is a replacement lanyard only, designed to restore a Sea-Dog emergency kill switch to full working order once the original lanyard becomes worn, cut, or frayed. The kill switch lanyard clips to the operator's life vest and connects to the kill switch mounted on the console. If the operator is thrown from the boat or moves too far from the helm, the lanyard pulls free of the switch, triggering the circuit change that cuts power to the engine and brings the boat to a stop. This replacement lanyard is built for the Sea-Dog kill switch system used with kill switch 420488-1.\u003c\/p\u003e\u003cp\u003eThe lanyard is coiled nylon construction in red, measuring approximately 15 inches when coiled and stretching to about 48 inches, giving the operator freedom of movement at the helm while still reaching the switch. It uses a snap-style closure at the switch end for quick attachment and release. Because the lanyard is the wear component of the kill switch system, Sea-Dog recommends replacing it as soon as it shows fraying, cuts, or other signs of wear, since a compromised lanyard may not release or seat properly and can affect the switch's ability to shut down the engine when needed. This is a lanyard-only replacement part; it does not include the kill switch itself.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 420489-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Replacement Lanyard Only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Kill Switch:\u003c\/strong\u003e 420488-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength, Stretched:\u003c\/strong\u003e 48 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength, Coiled:\u003c\/strong\u003e 15 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Snap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.082 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Taiwan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514423199\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eKill Switch 420488-1\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 420489-1?\u003c\/strong\u003e It is a replacement lanyard only for a Sea-Dog emergency kill switch, sold without the switch itself, intended for kill switch 420488-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this include the kill switch?\u003c\/strong\u003e No, part number 420489-1 is the lanyard only. The kill switch itself is a separate part, 420488-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the 420489-1 lanyard?\u003c\/strong\u003e The coiled lanyard measures approximately 15 inches when coiled and stretches to about 48 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this lanyard?\u003c\/strong\u003e The Sea-Dog 420489-1 lanyard is red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the lanyard made from?\u003c\/strong\u003e It is made of nylon, in a coiled design with a snap-style closure at the switch end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace my kill switch lanyard?\u003c\/strong\u003e The lanyard should be replaced if it becomes worn, cut, or frayed, since a damaged lanyard may not perform reliably when pulled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 420489-1 lanyard fit any Sea-Dog kill switch?\u003c\/strong\u003e This lanyard is designated as a replacement for kill switch 420488-1; check that your switch matches this part number before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the lanyard attach to the operator?\u003c\/strong\u003e The lanyard clips to the operator's life vest on one end and connects to the kill switch with a snap closure on the other end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens when the lanyard is pulled from the switch?\u003c\/strong\u003e Pulling the lanyard clip free from the kill switch changes the switch circuit, cutting power to the engine so the boat stops running.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this lanyard manufactured?\u003c\/strong\u003e The Sea-Dog 420489-1 replacement lanyard is manufactured in Taiwan.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988778561755,"sku":"S-D-420489-1","price":6.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5012.jpg?v=1784429376"},{"product_id":"universal-7-key-emergency-kill-switch-with-lanyard-fits-johnson-evinrude-mercury-yamaha-honda-tohatsu-suzuki-nissan-70-in-coil-tether-053455-10","title":"Moeller Universal 7 Key Kill Switch, Fits Johnson, Evinrude, Mercury, Yamaha, Honda, Tohatsu, Suzuki, Nissan, 70 Inch Coil Tether","description":"\u003cp\u003eThe Moeller 053455-10 is a universal 7 key kill switch built to serve as an emergency engine cut off switch on board. It comes with keys that fit Johnson, Evinrude, Mercury, Yamaha, Honda, Tohatsu, Suzuki, and Nissan kill switches, so a single unit covers the outboard and sterndrive brands most boaters already run. The switch uses a 70 inch coil type tether, which stretches to keep the lanyard clipped to the operator while allowing normal movement around the helm, and pulls free instantly to cut engine power if the operator is thrown from the seat or moves too far from the controls. This is a core piece of onboard safety equipment: a functioning kill switch and lanyard combination stops the engine the moment the tether disconnects, helping prevent a runaway boat if the driver is separated from the helm. At 0.16 pounds, the switch is compact and mounts easily into a standard helm panel. The Moeller 053455-10 is sold as the switch and key set with tether; it is intended as a direct-fit universal replacement for the kill switch and key styles used across the listed engine brands.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 053455-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Engine Parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeys Included:\u003c\/strong\u003e 7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Kill Switch Brands:\u003c\/strong\u003e Johnson, Evinrude, Mercury, Yamaha, Honda, Tohatsu, Suzuki, Nissan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTether Type:\u003c\/strong\u003e Coil type\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTether Length:\u003c\/strong\u003e 70 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729017944\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe Moeller 053455-10 is a universal kill switch, with keys sized to fit Johnson, Evinrude, Mercury, Yamaha, Honda, Tohatsu, Suzuki, and Nissan kill switches.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Moeller 053455-10 kill switch used for?\u003c\/strong\u003e The Moeller 053455-10 is an emergency engine cut off switch: the coil tether clips to the operator, and if it is pulled free the switch cuts power to the engine, which is why it is also called a kill switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich brands of kill switches does the Moeller 053455-10 fit?\u003c\/strong\u003e It ships with 7 keys sized to fit Johnson, Evinrude, Mercury, Yamaha, Honda, Tohatsu, Suzuki, and Nissan kill switches, making the 053455-10 a universal replacement across those brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many keys come with this kill switch?\u003c\/strong\u003e The Moeller 053455-10 includes 7 keys, covering the key patterns used by Johnson, Evinrude, Mercury, Yamaha, Honda, Tohatsu, Suzuki, and Nissan kill switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the tether on the 053455-10?\u003c\/strong\u003e 70 inches, and it is a coil type tether so it stretches to allow the operator freedom of movement at the helm while staying attached.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 053455-10 weigh?\u003c\/strong\u003e 0.16 pounds, keeping it a lightweight, easy to mount switch for the helm panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Moeller 053455-10 a genuine Moeller part?\u003c\/strong\u003e Yes, part number 053455-10 is a genuine Moeller universal 7 key kill switch, not an aftermarket clone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this kill switch if I do not know my original key type?\u003c\/strong\u003e Yes, because the Moeller 053455-10 includes 7 keys covering Johnson, Evinrude, Mercury, Yamaha, Honda, Tohatsu, Suzuki, and Nissan kill switches, one of the included keys will typically match an existing setup from those brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 053455-10?\u003c\/strong\u003e The Moeller 053455-10 universal 7 key kill switch includes the switch, the 70 inch coil type tether, and the set of 7 keys.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kill switch require any tools to install?\u003c\/strong\u003e The Moeller 053455-10 mounts into a standard helm switch panel opening; specific hardware and tool requirements depend on the boat's existing panel cutout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy should I replace a worn kill switch lanyard?\u003c\/strong\u003e A frayed or unreliable coil tether can fail to disconnect when needed; the Moeller 053455-10 provides a fresh 70 inch coil tether and matching switch to keep the emergency cut off function working as intended.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991101616347,"sku":"MOE-053455-10","price":10.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-MP28850__55942.1726514793.500.750.jpg?v=1785329134"},{"product_id":"marine-ignition-switch-for-evinrude-outboards-replaces-mp39760-mpn-87-01946","title":"EMP Ignition Switch for Evinrude Outboard Motors, Replaces MP39760 - Part 87-01946","description":"\u003cp\u003eThis EMP ignition switch is built for Evinrude outboard motors, giving boat owners a direct replacement option when the original switch fails or wears out. As the switch that turns engine power on, engages the starter, and controls key-operated accessory circuits, it is a core piece of the outboard's electrical system, and a worn or sticking switch can leave a boat unable to start. This unit is identified by EMP part number 87-01946 and is offered as a replacement for MP39760, so owners replacing an original Evinrude switch can order with confidence that the correct component is on its way. At 0.216 pounds, it is a lightweight, compact electrical component sized to install in the same location as the original switch on applicable Evinrude outboards. It carries UPC 840080417554 for straightforward identification when ordering or verifying the correct part at checkout.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e EMP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 87-01946\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Ignition Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Evinrude Outboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840080417554\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.216 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eEvinrude outboard motors\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the EMP 87-01946 ignition switch fit?\u003c\/strong\u003e The EMP 87-01946 ignition switch is designed for Evinrude outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a replacement for MP39760?\u003c\/strong\u003e Yes, EMP part number 87-01946 is offered as a replacement for MP39760.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the ignition switch weigh?\u003c\/strong\u003e The EMP 87-01946 ignition switch weighs 0.216 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this ignition switch?\u003c\/strong\u003e The UPC for the EMP 87-01946 Evinrude outboard ignition switch is 840080417554.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the EMP 87-01946 a genuine Evinrude part or an aftermarket replacement?\u003c\/strong\u003e The 87-01946 is an EMP-branded replacement switch, not an original Evinrude-branded part, made to replace MP39760 on applicable Evinrude outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch include a key?\u003c\/strong\u003e The dossier for the EMP 87-01946 ignition switch does not specify included accessories, so buyers should confirm key inclusion at the point of purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this ignition switch?\u003c\/strong\u003e The manufacturer part number is 87-01946, made by EMP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this switch on any outboard brand?\u003c\/strong\u003e No, the EMP 87-01946 ignition switch is designated for Evinrude outboard motors specifically.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my old switch matches this replacement?\u003c\/strong\u003e If your Evinrude outboard's original ignition switch is identified as MP39760, the EMP 87-01946 is offered as a direct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of product is the 87-01946?\u003c\/strong\u003e EMP 87-01946 is an ignition switch, the key-operated electrical component that powers on an Evinrude outboard motor and engages the starter.\u003c\/p\u003e","brand":"EMP","offers":[{"title":"Default Title","offer_id":48991292031195,"sku":"EMP-87-01946","price":22.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/EMP_87-01946_BRP_Ignition_Switch__35327.1722378438.500.750.jpg?v=1785329106"},{"product_id":"airhead-bks-6-universal-kill-switch-key-lanyard-fits-brp-johnson-evinrude-mercury-yamaha-honda-tohatsu-nissan-and-suzuki-1","title":"Airhead BKS-6 Outboard Kill Switch Keys with Lanyard, Fits BRP, Johnson, Evinrude, Mercury, Yamaha, Honda, Tohatsu, Nissan, Suzuki","description":"\u003cp\u003eThe Airhead BKS-6 is a lanyard of replacement outboard kill switch keys, built for boaters who want a spare on hand at all times. The lanyard carries 7 keys sized to fit most BRP, Johnson, Evinrude, Mercury, Yamaha, Honda, Tohatsu, Nissan, and Suzuki kill switches, so a single lanyard covers a wide range of outboard and sterndrive setups without needing to track down a brand-specific key. Losing or snapping a kill switch key away from the dock can strand a boat, since most marinas do not stock replacements on site; keeping the BKS-6 clipped in a life jacket pocket or tackle bag closes that gap.\u003c\/p\u003e\u003cp\u003eThe lanyard is finished with a swivel snap hook that keeps the cord from twisting and tangling in use, and the crimps holding the keys are stainless steel so they resist rust in a wet marine environment. Construction combines plastic key bodies with the stainless steel hardware for a durable, corrosion-resistant accessory that is meant to live in a boat's safety gear rather than a toolbox at home.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Airhead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e BKS-6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Outboard Kill Switch Keys with Lanyard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Keys:\u003c\/strong\u003e 7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Kill Switch Brands:\u003c\/strong\u003e BRP, Johnson, Evinrude, Mercury, Yamaha, Honda, Tohatsu, Nissan, Suzuki\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic, Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Swivel snap hook, stainless steel crimps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 8 x 4 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.13125 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multi\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits most BRP, Johnson, Evinrude, Mercury, Yamaha, Honda, Tohatsu, Nissan, and Suzuki kill switches.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many keys come on the Airhead BKS-6 lanyard?\u003c\/strong\u003e The Airhead BKS-6 lanyard holds 7 kill switch keys, giving a boater multiple spares on a single lanyard instead of just one replacement key.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich kill switch brands does the BKS-6 fit?\u003c\/strong\u003e It fits most BRP, Johnson, Evinrude, Mercury, Yamaha, Honda, Tohatsu, Nissan, and Suzuki kill switches, covering the majority of outboard kill switch designs on the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy carry a spare kill switch key at all?\u003c\/strong\u003e Losing or breaking a kill switch key away from the dock means the engine cannot be started, and most marinas do not stock replacement keys, so a spare like the BKS-6 lanyard prevents a day on the water from being cut short.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the BKS-6 lanyard made of?\u003c\/strong\u003e The keys and lanyard hardware use plastic and stainless steel construction, with stainless steel crimps that resist rust in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the BKS-6 lanyard have a clip or hook?\u003c\/strong\u003e Yes, it is equipped with a swivel snap hook that attaches to gear such as a life jacket or bag and prevents the lanyard from twisting or tangling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the BKS-6 kill switch key set?\u003c\/strong\u003e The Airhead BKS-6 measures 8 x 4 x 1 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the BKS-6 lanyard weigh?\u003c\/strong\u003e The BKS-6 weighs 0.13125 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the BKS-6 an official Airhead part?\u003c\/strong\u003e Yes, BKS-6 is the Airhead manufacturer part number for this outboard kill switch keys and lanyard set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the BKS-6 keys fit my specific outboard kill switch?\u003c\/strong\u003e The 7 keys on the BKS-6 lanyard are sized to fit most BRP, Johnson, Evinrude, Mercury, Yamaha, Honda, Tohatsu, Nissan, and Suzuki kill switches, though checking against the specific switch style is recommended before relying on it as a spare.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should I store the BKS-6 lanyard on my boat?\u003c\/strong\u003e Because it is compact and clips on with a swivel snap hook, the BKS-6 is designed to be kept on hand, such as clipped inside a life jacket pocket or tackle bag, so a spare kill switch key is always available.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the BKS-6 lanyard?\u003c\/strong\u003e The Airhead BKS-6 kill switch key lanyard is offered in a multi color finish.\u003c\/p\u003e","brand":"Airhead","offers":[{"title":"Default Title","offer_id":49025187872987,"sku":"K-T-BKS-6","price":12.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/img_b798a589-c32d-478e-9611-5ffec17aff12.jpg?v=1785332660"},{"product_id":"airhead-ultimate-pwc-lanyard-ul-2-red-black-universal-fit-for-sea-doo-yamaha-kawasaki-honda-polaris-tiger-shark-wet-jet","title":"Airhead Ultimate PWC Lanyard UL-2, Red\/Black, Universal Fit for Sea Doo Yamaha Kawasaki Honda Polaris Tiger Shark Wet Jet","description":"\u003cp\u003eThe Airhead Ultimate PWC Lanyard (UL-2) in Red\/Black is a all-in-one safety lanyard built for personal watercraft riders who want backup keys, a floating wrist band, and an emergency whistle in one package. It comes with 4 keys designed to fit all major PWC brands, including Sea Doo, Yamaha, Kawasaki, Honda, Polaris, Tiger Shark, and Wet Jet, so riders and passengers do not need brand-specific lanyards. A stainless steel key ring is included for attaching to Sea Doo D.E.S.S. Devices or a car key, giving added flexibility for riders who need to secure more than just the PWC ignition key.\u003c\/p\u003e\u003cp\u003eBeyond the keys, the lanyard is built for real emergency use on the water. It has a comfortable, floating, detachable wrist band and a floating vest lanyard, so if the lanyard is dropped or detached it stays on the surface instead of sinking. A high pitch, pea-less whistle is built in for signaling in an emergency, and a swivel snap hook keeps the cord from tangling during normal use. Because all the keys and hardware are included, there are no separate accessories to buy in order to use this lanyard with a PWC. The Red\/Black color option makes it easy to identify at a glance among other safety gear on board.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Airhead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e UL-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\/Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.24 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Keys Included:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Ring Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWrist Band:\u003c\/strong\u003e Floating, detachable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVest Lanyard:\u003c\/strong\u003e Floating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhistle:\u003c\/strong\u003e High pitch, pea-less\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook Type:\u003c\/strong\u003e Swivel snap hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Brands:\u003c\/strong\u003e Sea Doo, Yamaha, Kawasaki, Honda, Polaris, Tiger Shark, Wet Jet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal fit for Sea Doo, Yamaha, Kawasaki, Honda, Polaris, Tiger Shark, and Wet Jet personal watercraft\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat PWC brands does the Airhead UL-2 Ultimate Lanyard fit?\u003c\/strong\u003e The Airhead Ultimate Lanyard UL-2 includes 4 keys designed to fit all major PWC brands: Sea Doo, Yamaha, Kawasaki, Honda, Polaris, Tiger Shark, and Wet Jet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the UL-2 lanyard include a key ring for a Sea Doo D.E.S.S. Device?\u003c\/strong\u003e Yes, a stainless steel key ring is included with the UL-2 Ultimate Lanyard for attaching to Sea Doo D.E.S.S. Devices or a car key.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the UL-2 version of the Ultimate Lanyard?\u003c\/strong\u003e The UL-2 Ultimate PWC Lanyard is the Red\/Black color option; a Blue\/Silver version is sold as a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Airhead UL-2 lanyard weigh?\u003c\/strong\u003e The Airhead UL-2 Ultimate PWC Lanyard weighs 0.24 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the wrist band and vest lanyard float if dropped in the water?\u003c\/strong\u003e Yes, the UL-2 Ultimate Lanyard has a floating detachable wrist band and a floating vest lanyard, so both stay on the surface if separated from the rider.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the UL-2 lanyard have a built-in whistle?\u003c\/strong\u003e It includes a high pitch, pea-less whistle built into the lanyard for signaling in an emergency.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the key ring on the UL-2 lanyard made of?\u003c\/strong\u003e The key ring included with the UL-2 Ultimate Lanyard is made of stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the lanyard cord tangle during use?\u003c\/strong\u003e A swivel snap hook on the UL-2 Ultimate Lanyard is designed to keep the cord from tangling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to buy any additional keys or accessories to use the UL-2 lanyard?\u003c\/strong\u003e No additional accessories are needed. The UL-2 Ultimate Lanyard comes complete with 4 keys fitting all major PWC brands plus the stainless steel key ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many keys come with the Airhead UL-2 lanyard?\u003c\/strong\u003e The UL-2 Ultimate PWC Lanyard includes 4 keys designed to fit all major PWC brands.\u003c\/p\u003e","brand":"Airhead","offers":[{"title":"Default Title","offer_id":49031624982747,"sku":"K-T-UL-2","price":96.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71aKZ7SVXJL.jpg?v=1785217029"},{"product_id":"t-h-marine-ks-1-saf-t-stop-ignition-kill-switch-for-single-outboard-black","title":"T-H Marine KS-1 Saf-T-Stop Ignition Kill Switch for Single Outboard, Black","description":"\u003cp\u003eThe T-H Marine KS-1 Saf-T-Stop is an ignition kill switch designed for single outboard installations, giving the operator an emergency engine shutoff within immediate reach of the helm. The switch works with an extra strong, coiled, self-retracting lanyard that the operator clips to a life jacket or wrist; if the operator is thrown from the seat, the lanyard pulls free and cuts ignition power, stopping the engine. This type of emergency stop switch is required by existing boating safety laws, and the KS-1 is built to meet those requirements.\u003c\/p\u003e\u003cp\u003eThe switch housing is molded from durable plastic in a black matte finish that resists glare and blends into most helm layouts. It mounts into a 1-1\/2 inch diameter hole and requires 1-1\/2 inches of clearance behind the panel for the switch body, so it is a straightforward panel-mount installation on the dash or console near the helm seat. The overall switch housing measures 2-3\/4 inches by 2 inches. Electrically, it is a simple two-position ON-OFF circuit, making wiring and operation easy to understand for any boater replacing a worn or damaged switch.\u003c\/p\u003e\u003cp\u003eWhile rated for all single outboard applications, this style of kill switch is commonly installed across outboard, inboard\/outboard, inboard, and multi-engine boats wherever a single emergency stop circuit is needed at that station.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e KS-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Saf-T-Stop Ignition Kill Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Single outboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Ignition kill switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e ON-OFF, 2 positions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance Required Behind Panel:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Housing Dimensions:\u003c\/strong\u003e 2-3\/4 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLanyard:\u003c\/strong\u003e Extra strong, coiled, self-retracting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Black, matte\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.26 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the T-H Marine KS-1 kill switch designed for?\u003c\/strong\u003e The KS-1 Saf-T-Stop is designed for single outboard applications, providing one emergency ignition shutoff circuit at the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the KS-1 meet legal requirements for emergency stop switches?\u003c\/strong\u003e Yes, the T-H Marine KS-1 Saf-T-Stop meets the requirements of existing laws covering mandatory use of emergency engine stop switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole do I need to mount the KS-1 switch?\u003c\/strong\u003e The KS-1 mounts in a 1-1\/2 inch diameter hole and requires 1-1\/2 inches of clearance behind the panel for the switch body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is the KS-1 switch housing?\u003c\/strong\u003e The switch housing measures 2-3\/4 inches by 2 inches overall, not counting the depth needed behind the mounting panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lanyard on the KS-1 made of and how does it work?\u003c\/strong\u003e An extra strong, coiled, self-retracting lanyard connects to the operator; if it is pulled free, the KS-1 switch cuts ignition power and stops the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the KS-1 kill switch housing made from?\u003c\/strong\u003e The T-H Marine KS-1 housing is made from plastic, finished in a black matte color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the KS-1 an ON-OFF switch or does it have more positions?\u003c\/strong\u003e It is a two-position ON-OFF circuit, the standard configuration for an ignition kill switch like the KS-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the ingress protection rating of the KS-1 switch?\u003c\/strong\u003e The KS-1 carries an IP54 ingress protection rating, indicating protection against dust and splashing water typical of a helm-mounted marine switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the T-H Marine KS-1 weigh?\u003c\/strong\u003e The KS-1 Saf-T-Stop switch weighs 0.26 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the KS-1 be used to replace a worn or broken kill switch?\u003c\/strong\u003e Yes, since it is a standard 1-1\/2 inch panel-mount kill switch, the KS-1 can be installed as a replacement wherever a single-outboard emergency stop switch is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the T-H Marine KS-1 switch?\u003c\/strong\u003e The KS-1 has a black matte finish.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":49033323544795,"sku":"T-H-KS-1","price":38.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51-hBd_9m-L.jpg?v=1785244688"},{"product_id":"t-h-marine-l-4-spare-lanyard-for-saf-t-stop-ks-1-kill-switch","title":"T-H Marine L-4 Spare Lanyard for Saf-T-Stop KS-1 Kill Switch","description":"\u003cp\u003eThe T-H Marine L-4 is a spare lanyard designed as a replacement cord for the Saf-T-Stop KS-1 kill switch. Boat kill switch lanyards are wear items: the cord and clip take repeated stretching, saltwater exposure, and UV exposure every time the switch is used, so keeping a spare on hand means a worn or lost lanyard does not put the whole ignition safety switch out of service. The L-4 lanyard is built from a nylon and plastic construction sized to work with the KS-1 kill switch's lanyard clip and pull mechanism.\u003c\/p\u003e\u003cp\u003eBecause the lanyard is the component that most often needs replacing on a kill switch, stocking the L-4 as a spare lets boat owners restore normal operation of an existing KS-1 switch without purchasing an entirely new switch assembly. It ships as a single, ready-to-use lanyard.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e L-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Spare kill switch lanyard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e KS-1 kill switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon, Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572003154\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eKS-1 kill switch\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers listed\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-H Marine L-4?\u003c\/strong\u003e The L-4 is a spare replacement lanyard for the T-H Marine KS-1 kill switch, sold as a single ready-to-use cord and clip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the L-4 lanyard fit my KS-1 kill switch?\u003c\/strong\u003e Yes, the L-4 is made to work as a replacement lanyard for the KS-1 kill switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to buy a whole new kill switch if my lanyard wears out?\u003c\/strong\u003e No, the L-4 spare lanyard lets you replace just the worn cord on a KS-1 kill switch instead of buying a complete new switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the L-4 lanyard made from?\u003c\/strong\u003e The L-4 kill switch lanyard is made from nylon and plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the L-4 lanyard?\u003c\/strong\u003e The L-4 replacement lanyard is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the L-4 lanyard weigh?\u003c\/strong\u003e The T-H Marine L-4 lanyard weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many lanyards come in one L-4 order?\u003c\/strong\u003e One L-4 order includes a single spare lanyard, a unit count of 1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the L-4 a genuine T-H Marine part?\u003c\/strong\u003e Yes, the L-4 is a genuine T-H Marine replacement lanyard, identified by manufacturer part number L-4.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install the L-4 lanyard on my kill switch?\u003c\/strong\u003e The L-4 lanyard attaches to the KS-1 kill switch's clip in place of the original worn lanyard, so no tools beyond the switch's existing clip mechanism are needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the T-H Marine L-4 lanyard?\u003c\/strong\u003e The T-H Marine L-4 spare lanyard has UPC 733572003154.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":49033323577563,"sku":"T-H-L-4","price":12.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41JjNbFpx9L.jpg?v=1785244689"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/5012.jpg?v=1785356952","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-engine-parts-systems-ignition-starting-ignition-switches-kill-switches.oembed?page=2","provider":"Good Vibes Marina","version":"1.0","type":"link"}