{"title":"Starters \u0026 Starter Motors","description":null,"products":[{"product_id":"flywheel-ring-gear-168-tooth-for-14-inch-gm-marine-flywheel-sierra-18-4516","title":"Sierra Ring Gear-Flywheel 18-4516, 14 Inch GM Flywheel, 168 Teeth","description":"\u003cp\u003eThe Sierra Ring Gear-Flywheel 18-4516 is a replacement ring gear sized for a 14 inch GM flywheel with 168 teeth. It is used in marine engine applications where the flywheel ring gear has worn, cracked, or lost teeth from repeated starter engagement, a common failure point that can cause starter grinding or intermittent no-crank conditions. Installing a correctly sized and correctly toothed ring gear is important because a mismatch in diameter or tooth count will cause the starter pinion to bind, skip, or fail to engage the flywheel at all.\u003c\/p\u003e\u003cp\u003eThis ring gear is manufactured to fit the 14 inch GM flywheel platform specifically, with 168 teeth, so it is intended for engines using that flywheel size and tooth count rather than the 12 inch, 153-tooth GM flywheel platform, which uses a different ring gear. Confirm your existing flywheel's diameter and tooth count before ordering, since installing the wrong ring gear on the wrong flywheel size will result in improper starter engagement.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-4516\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Ring Gear-Flywheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlywheel Diameter:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Count:\u003c\/strong\u003e 168 teeth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 14 inch GM flywheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282294892\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e14 inch GM flywheel with 168 teeth\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size flywheel does the Sierra 18-4516 ring gear fit?\u003c\/strong\u003e The Sierra 18-4516 is sized for a 14 inch GM flywheel with 168 teeth. It is not intended for the smaller 12 inch, 153-tooth GM flywheel, which uses a different ring gear part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many teeth does this ring gear have?\u003c\/strong\u003e 168 teeth. Matching the tooth count to your flywheel is essential for proper starter pinion engagement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-4516 ring gear weigh?\u003c\/strong\u003e It weighs 2.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the same as the 12 inch GM ring gear?\u003c\/strong\u003e No. The 18-4516 fits a 14 inch GM flywheel with 168 teeth, while the 12 inch, 153-tooth GM flywheel uses a separate Sierra part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-4516?\u003c\/strong\u003e You receive one Sierra Ring Gear-Flywheel, part number 18-4516, sized for a 14 inch GM flywheel with 168 teeth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace a flywheel ring gear?\u003c\/strong\u003e A worn, cracked, or chipped ring gear can cause the starter to grind, slip, or fail to turn the engine over. Replacing the ring gear with the correctly toothed 18-4516 restores proper starter engagement on a 14 inch GM flywheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-4516 come with the flywheel itself?\u003c\/strong\u003e No, the 18-4516 is the ring gear only, sized for a 14 inch GM flywheel with 168 teeth; it is not sold with a complete flywheel assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this ring gear on a non-GM flywheel?\u003c\/strong\u003e The 18-4516 is designed for a 14 inch GM flywheel with 168 teeth, so fitment outside that specification is not confirmed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the UPC listed for this part number available?\u003c\/strong\u003e Yes, the Sierra 18-4516 Ring Gear-Flywheel carries UPC 808282294892.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between 18-4516 and 18-4517?\u003c\/strong\u003e The 18-4516 fits a 14 inch GM flywheel with 168 teeth, while 18-4517 is a separate part sized for a 12 inch GM flywheel with 153 teeth. Confirm your flywheel's diameter and tooth count before choosing between the two.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988198666459,"sku":"SIE-18-4516","price":57.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-4516__76933.1558185115.500.750.jpg?v=1785189111"},{"product_id":"sierra-18-4904-starter-handle-and-rope-for-johnson-evinrude-outboards-4-5-9-64-recoil-pull-rope","title":"Sierra 18-4904 Starter Handle and Rope for Johnson\/Evinrude Outboard Motors","description":"\u003cp\u003eThe Sierra 18-4904 is a complete pull-start replacement kit for Johnson\/Evinrude outboard motors, supplying both the starter handle and the starter rope in one part. It is built for boaters whose factory pull-start handle has cracked, whose rope has frayed or snapped, or whose recoil starter needs a rope replacement to get the engine running again. The kit uses a #4.5 (9\/64 inch), also referenced as 3.6mm, rope size and pairs it with a handle finished with a machined exterior for a secure, comfortable grip during starting. Because the handle and rope are sold together as a single kit, there is no need to source a separate rope and handle to complete a starter cord repair. The 18-4904 ships as a compact, lightweight part, making it an easy, low-cost fix compared with replacing an entire recoil starter assembly. For owners who only need a handle and already have usable rope, Sierra also lists a handle-only part under a separate part number. This kit is intended as a direct fit for the pull-start systems on the Johnson\/Evinrude outboard motors it is designed for.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-4904\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Starter Handle \u0026amp; Rope\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Size:\u003c\/strong\u003e #4.5 (9\/64 inch) \/ 3.6mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 7.0 inches L x 4.88 inches W x 1.75 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.19 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999318206\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e One starter handle and one rope\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for Johnson\/Evinrude outboard motors.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sierra 18-4904?\u003c\/strong\u003e The Sierra 18-4904 kit includes one starter handle and one starter rope, sold together as a complete pull-start replacement set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rope size does the Sierra 18-4904 use?\u003c\/strong\u003e The rope on the Sierra 18-4904 is sized #4.5 (9\/64 inch), also referenced as 3.6mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich outboard motors is the Sierra 18-4904 designed for?\u003c\/strong\u003e The Sierra 18-4904 starter handle and rope is designed for Johnson\/Evinrude outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-4904 weigh?\u003c\/strong\u003e The Sierra 18-4904 starter handle and rope kit weighs 0.19 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the starter handle without the rope?\u003c\/strong\u003e Yes, Sierra offers the handle by itself as a separate part number (18-4901) for buyers who only need a replacement handle rather than the full handle-and-rope kit that the 18-4904 provides.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the Sierra 18-4904?\u003c\/strong\u003e The Sierra 18-4904 ships in packaging measuring 7.0 inches long by 4.88 inches wide by 1.75 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the handle grip machined or molded?\u003c\/strong\u003e The handle on the Sierra 18-4904 has a machined exterior finish for a secure grip when pull-starting the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install the Sierra 18-4904 starter handle and rope?\u003c\/strong\u003e Installation involves removing the old, worn rope and handle from the recoil starter and threading the new 18-4904 rope through the starter mechanism before attaching the handle; the rope size is #4.5 (9\/64 inch\/3.6mm) to match the original pull-start setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-4904 a genuine Sierra part?\u003c\/strong\u003e Yes, the 18-4904 is a genuine Sierra-branded starter handle and rope kit, not a generic unbranded substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-4904?\u003c\/strong\u003e The UPC for the Sierra 18-4904 starter handle and rope kit is 030999318206.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Sierra 18-4904 manufactured?\u003c\/strong\u003e The Sierra 18-4904 starter handle and rope kit is manufactured in China.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace my outboard's starter rope and handle?\u003c\/strong\u003e A frayed, snapped, or worn starter rope, or a cracked handle, are common reasons to replace the pull-start components; the Sierra 18-4904 provides both parts together so the repair can be completed in one purchase.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988198895835,"sku":"SIE-18-4904","price":10.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-4904_lg__96274.1558129283.500.750.jpg?v=1785188022"},{"product_id":"recoil-starter-rewind-spring-for-yamaha-6-20-hp-outboards-replaces-63v-15713-00-00-sierra-18-51001","title":"Sierra 18-51001 Recoil Starter Spring, Replaces 63V-15713-00-00, Fits 9.9-20 HP Outboards","description":"\u003cp\u003eThe Sierra 18-51001 is a recoil starter rewind spring for outboard motors, designed to restore proper tension to the manual pull-start mechanism when the original spring has weakened, broken, or lost its recoil action. This spring fits into the recoil starter housing and provides the return force that retracts the starter rope after each pull, allowing the engine to be hand-started reliably.\u003c\/p\u003e\u003cp\u003eAs a direct-fit replacement, the 18-51001 is built to the same specifications as the original equipment spring it replaces, so it installs into the existing recoil starter assembly without modification. It is a compact, coiled component measuring 0.39 x 0.39 x 0.39 inches, sized to seat correctly in the recoil housings of the outboard models listed below. Replacing a fatigued recoil spring restores easy, consistent starter rope retraction and pull-start performance without the cost of a full recoil starter assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-51001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Engine Parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Rewind Spring (1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282342197\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e9.9 (1996-09)\u003c\/li\u003e\n\u003cli\u003e15 (1996-09)\u003c\/li\u003e\n\u003cli\u003eF6 (2001-08)\u003c\/li\u003e\n\u003cli\u003eF8 (2001-14)\u003c\/li\u003e\n\u003cli\u003eF9.9 (2005-14)\u003c\/li\u003e\n\u003cli\u003eF15 (1998-14)\u003c\/li\u003e\n\u003cli\u003eF20 (2006-14)\u003c\/li\u003e\n\u003cli\u003eT8 (2002-10)\u003c\/li\u003e\n\u003cli\u003eT9.9 (2007-14)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e63V-15713-00-00\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-51001 spring fit?\u003c\/strong\u003e The Sierra 18-51001 recoil starter spring fits outboard models 9.9 (1996-09), 15 (1996-09), F6 (2001-08), F8 (2001-14), F9.9 (2005-14), F15 (1998-14), F20 (2006-14), T8 (2002-10), and T9.9 (2007-14).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does 18-51001 replace?\u003c\/strong\u003e It replaces OEM part number 63V-15713-00-00, so it can be ordered as a direct equivalent for that original recoil starter spring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-51001 spring a direct fit or does it require modification?\u003c\/strong\u003e No modification is needed. The Sierra 18-51001 is sized and shaped to install directly into the recoil starter housing of the outboard models it fits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this recoil starter spring?\u003c\/strong\u003e The 18-51001 spring measures 0.39 x 0.39 x 0.39 inches and weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many springs come in the package?\u003c\/strong\u003e Each package of the Sierra 18-51001 includes one rewind spring, sold as a single unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should a recoil starter spring like the 18-51001 be replaced?\u003c\/strong\u003e Replace it when the pull-start rope no longer retracts on its own, feels loose, or the recoil mechanism has lost tension or broken, which points to a worn or snapped spring inside the starter housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes replacing the spring require a full recoil starter assembly?\u003c\/strong\u003e No. The 18-51001 lets you replace just the internal rewind spring rather than purchasing an entire recoil starter assembly, as long as the rest of the housing and mechanism are in good condition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill 18-51001 fit outboards not listed in the fitment range?\u003c\/strong\u003e This spring is confirmed to fit the specific models and year ranges listed, including 9.9, 15, F6, F8, F9.9, F15, F20, T8, and T9.9; fitment outside that listed range is not confirmed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part or an aftermarket copy?\u003c\/strong\u003e The 18-51001 is a Sierra-branded recoil starter spring manufactured to replace OEM part 63V-15713-00-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-51001 spring?\u003c\/strong\u003e The Sierra 18-51001 recoil starter spring carries UPC 808282342197.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988199092443,"sku":"SIE-18-51001","price":5.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-51001__31563.1558185260.500.750.jpg?v=1785189038"},{"product_id":"sierra-18-55505-outboard-starter-12v-marine-replacement-starter-motor-with-upgraded-solenoid-and-water-intrusion-sealing","title":"Sierra 18-55505 Outboard Starter for Mercury Outboard Engines, 12 Volt DC","description":"\u003cp\u003eThe Sierra 18-55505 is a 12 volt DC outboard starter built for Mercury outboard engines, engineered to hold up in harsh marine environments where moisture and vibration cause standard starters to fail early. It features OEM-upgraded internals, including a strengthened connection between the solenoid and the commutator brushes, an upgraded planetary seal, and a robust clutch gear spring, all aimed at extending service life and improving cranking reliability season after season.\u003c\/p\u003e\u003cp\u003eA redesigned solenoid uses higher quality materials for consistent performance and includes an increased battery stud length that makes wiring and installation easier at the bench or in the boat. To fight the water intrusion that plagues outboard starters, Sierra integrated seals at key points in the housing along with a one-way duckbill moisture valve and relief cuts, so any water that does get in has a path out before it can start corroding internal components. The starter carries a painted surface finish and an improved housing for added corrosion resistance in salt or fresh water use.\u003c\/p\u003e\u003cp\u003eRated at 1.4 kW and weighing 7.7 pounds, the Sierra 18-55505 is designed as a direct functional upgrade over standard replacement starters for Mercury outboard engines.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-55505\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mercury outboard engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1.4 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Type:\u003c\/strong\u003e Single Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282379094\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-55505?\u003c\/strong\u003e It is a 12 volt DC outboard starter built by Sierra for Mercury outboard engines, part number 18-55505.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-55505 fit my Mercury outboard?\u003c\/strong\u003e The Sierra 18-55505 is designed for Mercury outboard engines; check your existing starter's part number or your engine's parts diagram against 18-55505 to confirm an exact match before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this starter weigh?\u003c\/strong\u003e The Sierra 18-55505 outboard starter weighs 7.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the Sierra 18-55505 starter?\u003c\/strong\u003e It is a 12 volt DC starter rated at 1.4 kW.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes this starter better than a standard replacement?\u003c\/strong\u003e The 18-55505 includes OEM-upgraded features not found on basic replacement starters: a strengthened solenoid-to-commutator brush connection, an upgraded planetary seal, and a reinforced clutch gear spring for longer service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Sierra 18-55505 handle water intrusion?\u003c\/strong\u003e Seals are placed at key points throughout the housing, and a one-way duckbill moisture valve along with relief cuts lets any water that gets in drain back out before corrosion can start.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing made of?\u003c\/strong\u003e The Sierra 18-55505 starter has a plastic housing component with a painted surface finish for added corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation different from a standard starter?\u003c\/strong\u003e The 18-55505 has an increased battery stud length compared to standard designs, which Sierra built in specifically to make cable connection and installation easier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-55505?\u003c\/strong\u003e You receive one complete Sierra 18-55505 outboard starter assembly, ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-55505 a genuine Sierra part or aftermarket?\u003c\/strong\u003e The 18-55505 is manufactured and sold under the Sierra brand as an OEM-upgraded replacement starter, not a generic third-party clone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-55505 include the solenoid?\u003c\/strong\u003e Yes, the Sierra 18-55505 starter comes with its solenoid attached as part of the complete starter assembly, featuring Sierra's improved solenoid design.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988218327259,"sku":"SIE-18-55505","price":215.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__72104.1753840745.500.750.jpg?v=1785188473"},{"product_id":"sierra-18-55506-outboard-starter-for-mercury-outboards-12v-marine-starter-motor-with-upgraded-solenoid","title":"Sierra 18-55506 Starter for Mercury Outboard Engines, 12 Volt","description":"\u003cp\u003eThe Sierra 18-55506 is a 12 volt starter built for Mercury outboard engines, engineered to hold up in harsh marine environments where moisture and corrosion take a toll on cranking components. It features an improved solenoid design for maximum reliability, with a stronger connection between the solenoid and commutator brushes and an increased battery stud length that makes wiring the unit easier during installation.\u003c\/p\u003e\u003cp\u003eThe housing has been upgraded to reduce water intrusion, with seals strategically placed throughout the unit to keep moisture out. A duckbill valve and relief cuts give any water that does find its way in a path to exit before it can cause corrosion, and a reinforced clutch gear spring helps extend the life of the drive mechanism. The starter runs on a 12 volt DC system and delivers 1.4 KW of cranking power. The housing is constructed of plastic with a painted surface finish. Each unit ships as a single, complete replacement starter ready to install.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-55506\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Mercury Outboard Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1.4 KW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCranking Phase Type:\u003c\/strong\u003e Cranking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Painted surface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-55506 starter fit?\u003c\/strong\u003e The Sierra 18-55506 is built for Mercury outboard engines and is designed as a 12 volt cranking starter for that application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-55506 a 12 volt starter?\u003c\/strong\u003e Yes, this starter runs on a 12 volt DC electrical system and delivers 1.4 KW of cranking power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing material on the 18-55506 starter?\u003c\/strong\u003e The housing is made of plastic with a painted surface finish, part of an upgraded design intended to reduce water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-55506 starter weigh?\u003c\/strong\u003e The Sierra 18-55506 starter weighs 7.15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-55506 include any features to prevent corrosion?\u003c\/strong\u003e It includes a duckbill valve and relief cuts that let any moisture that enters the housing exit before corrosion can set in, along with seals placed throughout the unit to reduce water intrusion in the first place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with the Sierra 18-55506 starter?\u003c\/strong\u003e Each order includes one complete Sierra 18-55506 outboard starter, ready to install as a single unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the solenoid design matter on this starter?\u003c\/strong\u003e The 18-55506 uses an improved solenoid design that provides a stronger connection between the solenoid and the commutator brushes for more reliable starts, along with a longer battery stud for easier wiring during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-55506 an OEM or aftermarket starter?\u003c\/strong\u003e The 18-55506 is a Sierra-brand replacement starter built with upgraded features such as an improved planetary seal and a reinforced clutch gear spring to extend service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of clutch gear does the 18-55506 use?\u003c\/strong\u003e This starter uses a clutch gear with a reinforced spring designed to maximize drive mechanism life span and reliability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Sierra 18-55506 be used in saltwater conditions?\u003c\/strong\u003e It is engineered for harsh marine environments, with sealing and a moisture relief valve intended to reduce corrosion from water intrusion, making it suited to marine outboard use.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988218360027,"sku":"SIE-18-55506","price":211.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/GFC__13130.1753840746.500.750.jpg?v=1785188942"},{"product_id":"outboard-starter-for-mercury-mariner-35-50-hp-replaces-50-55601a2-sierra-18-5601","title":"Sierra 18-5601 Outboard Starter, Replaces 50-55601, 50-55601A2, 50-38890A1, Fits Mercury\/Mariner 35-50 HP Outboards","description":"\u003cp\u003eThe Sierra 18-5601 is a 12 volt outboard starter motor built to replace the original starter on Mercury\/Mariner outboard motors in the 35-50 HP range. It is designed as a direct replacement, meeting or exceeding the performance of the original equipment starter it takes the place of. The housing and internal components are metal construction for durability in the marine environment.\u003c\/p\u003e\u003cp\u003eThis starter is a straightforward swap for boat owners and marine technicians replacing a worn, weak, or failed starter motor on a compatible Mercury\/Mariner outboard. Because it is sold under the Sierra 18-5601 part number, it can be ordered and cross-checked against the original Mercury part numbers it replaces, making it easy to confirm fitment before installing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5601\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.82 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 10 x 6 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 35-50 HP models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury\/Mariner outboard, 35-50 HP models\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e50-55601\u003c\/li\u003e\n\u003cli\u003e50-55601A2\u003c\/li\u003e\n\u003cli\u003e50-38890A1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-5601 starter fit?\u003c\/strong\u003e The Sierra 18-5601 fits Mercury\/Mariner outboard motors in the 35-50 HP range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat Mercury part numbers does the 18-5601 replace?\u003c\/strong\u003e It replaces Mercury part numbers 50-55601, 50-55601A2, and 50-38890A1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5601 a genuine Mercury starter or an aftermarket part?\u003c\/strong\u003e It is an aftermarket replacement made by Sierra, engineered to meet or exceed the performance of the original Mercury starter it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the 18-5601 starter?\u003c\/strong\u003e This is a 12 volt starter motor, the standard voltage for the Mercury\/Mariner 35-50 HP outboards it fits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5601 weigh?\u003c\/strong\u003e The Sierra 18-5601 outboard starter weighs 5.82 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-5601 starter?\u003c\/strong\u003e The unit measures 10 x 6 x 6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-5601 starter made of?\u003c\/strong\u003e The 18-5601 is made of metal construction, suited to the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5601 work on any Mercury outboard?\u003c\/strong\u003e No, the Sierra 18-5601 is designed specifically for Mercury\/Mariner outboards in the 35-50 HP range; other HP ranges use a different Sierra starter part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the 18-5601 is the correct replacement for my old starter?\u003c\/strong\u003e Check your existing starter or engine documentation for one of the OEM numbers 50-55601, 50-55601A2, or 50-38890A1; if it matches, the Sierra 18-5601 is the correct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-5601?\u003c\/strong\u003e The order includes one Sierra 18-5601 outboard starter motor.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988218523867,"sku":"SIE-18-5601","price":197.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5601__83260.1722489635.500.750.jpg?v=1785189010"},{"product_id":"sierra-18-5605-outboard-starter-for-mercury-mariner-40-50-hp-4-cyl-replaces-50-73521","title":"Sierra 18-5605 Outboard Starter for Mercury 30 Jet 3-Cylinder, Replaces 50-898265005 and 50-73521, White, 12 Volt","description":"\u003cp\u003eThe Sierra 18-5605 is a 12-volt DC outboard starter built as a direct replacement for Mercury 30 Jet 3-cylinder outboard engines within the G159200 to G589999 serial number range. Constructed with a metal housing, it is designed to meet or exceed the performance of the original equipment starter it replaces. The white finish matches the factory color scheme used on the applicable Mercury outboards, so it installs without an odd-looking mismatch under the cowling.\u003c\/p\u003e\u003cp\u003eThis starter carries a compact footprint of 9.75 x 4.5 x 6 inches and weighs 6.33 pounds, making it a manageable, bolt-in swap for anyone replacing a worn or failed starter motor rather than rebuilding one. It cross-references directly to Mercury OEM part numbers 50-898265005 and 50-73521, so it is a straightforward match for boaters looking for a factory-equivalent replacement rather than a generic universal-fit substitute.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5605\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.33 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 9.75 x 4.5 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerial Number Range:\u003c\/strong\u003e G159200 to G589999\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 747730043937\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e 50-898265005, 50-73521\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury 30 Jet, 3-cylinder outboard, serial number range G159200 to G589999\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e50-898265005\u003c\/li\u003e\n\u003cli\u003e50-73521\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-5605 fit?\u003c\/strong\u003e The Sierra 18-5605 fits Mercury 30 Jet 3-cylinder outboard engines within the serial number range G159200 to G589999.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-5605 starter replace?\u003c\/strong\u003e It replaces Mercury OEM part numbers 50-898265005 and 50-73521, making the 18-5605 a direct cross-reference for those factory starters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5605 a 12-volt starter?\u003c\/strong\u003e Yes, the Sierra 18-5605 is a 12-volt DC outboard starter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5605 starter weigh?\u003c\/strong\u003e The Sierra 18-5605 weighs 6.33 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-5605 starter?\u003c\/strong\u003e It measures 9.75 x 4.5 x 6 inches (length x width x height).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-5605 starter made from?\u003c\/strong\u003e The 18-5605 is constructed with a metal housing for durability in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-5605 starter?\u003c\/strong\u003e It has a white finish, matching the factory color used on the applicable Mercury outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5605 a genuine Mercury part or aftermarket?\u003c\/strong\u003e The 18-5605 is a Sierra-branded aftermarket starter engineered to meet or exceed the performance of the original Mercury 50-898265005 and 50-73521 starters it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5605 fit any Mercury outboard, or only specific serial numbers?\u003c\/strong\u003e The 18-5605 is designated for Mercury 30 Jet 3-cylinder outboards within the G159200 to G589999 serial number range, not a universal fit across all Mercury outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-5605?\u003c\/strong\u003e Ordering the Sierra 18-5605 gets you one complete outboard starter motor, ready to install as a direct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the UPC 747730043937 correspond to the Sierra 18-5605?\u003c\/strong\u003e Yes, UPC 747730043937 is the identifier for the Sierra 18-5605 outboard starter.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988218556635,"sku":"SIE-18-5605","price":210.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5605__61987.1722384938.500.750.jpg?v=1785188118"},{"product_id":"sierra-18-5603-1-noseless-marine-starter-for-gm-ford-standard-rotation-inboard-engines-replaces-oem-573001","title":"Sierra 18-5603-1 Noseless Starter, Top Mount Rear Entry, Replaces 573001, GM and Ford Standard Rotation Engines","description":"\u003cp\u003eThe Sierra 18-5603-1 is a noseless, top mount, rear entry starter built for standard rotation GM and Ford marine engines. It turns CCW (counterclockwise) and is engineered as a direct replacement for OEM part number 573001, giving boat owners a straightforward swap when the original starter fails or needs replacement. This starter can also be used in place of Sierra part 18-5908, making it a flexible option for shops and owners servicing multiple engine setups that call for either part.\u003c\/p\u003e\u003cp\u003eConstruction is steel, and the unit is rated at 1.2 KW with a three phase design. At 10.4 pounds, it matches the physical demands of inboard cranking duty on standard rotation blocks. It is backed by a 90 day warranty, giving buyers confidence in fit and function from install.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5603-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarter Type:\u003c\/strong\u003e Noseless, top mount, rear entry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotation:\u003c\/strong\u003e CCW (standard rotation)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Compatibility:\u003c\/strong\u003e GM and Ford engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchangeable With:\u003c\/strong\u003e Sierra 18-5908\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1.2 KW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Type:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282379087\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStandard rotation GM engines\u003c\/li\u003e\n\u003cli\u003eStandard rotation Ford engines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e573001\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-5603-1 starter fit?\u003c\/strong\u003e The Sierra 18-5603-1 is built for standard rotation GM and Ford marine engines, turning CCW (counterclockwise) in a top mount, rear entry configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5603-1 a match for an OEM 573001 starter?\u003c\/strong\u003e Yes, the 18-5603-1 replaces OEM part number 573001, making it a direct swap for engines originally fitted with that starter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does noseless mean for this starter?\u003c\/strong\u003e Noseless describes the housing style of the Sierra 18-5603-1, which mounts at the top of the engine and enters at the rear rather than using a front drive nose extension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-5603-1 be used instead of a Sierra 18-5908 starter?\u003c\/strong\u003e Yes, the Sierra 18-5603-1 can be used in place of Sierra part 18-5908 on applicable standard rotation GM and Ford engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich direction does this starter rotate?\u003c\/strong\u003e The Sierra 18-5603-1 turns CCW, meaning it is built for standard rotation engines, not reverse rotation applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5603-1 starter weigh?\u003c\/strong\u003e This starter weighs 10.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mounting style of the 18-5603-1?\u003c\/strong\u003e The Sierra 18-5603-1 is a top mount, rear entry starter with a noseless housing design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-5603-1 starter made from?\u003c\/strong\u003e The 18-5603-1 starter is made of steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the power rating of this starter?\u003c\/strong\u003e The Sierra 18-5603-1 is rated at 1.2 KW.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5603-1 a three phase or single phase unit?\u003c\/strong\u003e The Sierra 18-5603-1 is a three phase starter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty covers the Sierra 18-5603-1 starter?\u003c\/strong\u003e A 90 day warranty covers the Sierra 18-5603-1 starter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-5603-1 starter?\u003c\/strong\u003e The UPC for the Sierra 18-5603-1 starter is 808282379087.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988218589403,"sku":"SIE-18-5603-1","price":237.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5603-1__42367.1737836086.500.750.jpg?v=1785188299"},{"product_id":"sierra-18-5602-outboard-starter-for-mercury-25-hp-4-stroke-replaces-50-888151t","title":"Sierra 18-5602 Outboard Starter, Replaces Mercury 50-67341, Fits 35-40 HP 2-Cyl \u0026 50 HP 4-Cyl Models","description":"\u003cp\u003eThe Sierra 18-5602 is a marine-grade outboard starter built as a direct replacement for Mercury outboard engines, engineered to meet or exceed original equipment performance. It is designed to fit 35-40 HP 2 cylinder and 50 HP 4 cylinder Mercury outboard models. The starter uses high quality magnets and field coils to deliver strong starting torque even in demanding marine conditions, while double sealed housings protect internal components from moisture and salt spray for a longer service life. High quality brushes further extend durability under repeated starts. Construction meets SAE J1171 and ISO 8846 marine electrical standards, the industry benchmarks for ignition protection and safety on boats. This starter is a direct cross reference for Mercury part numbers 50-67341, 50-58788A3, 50-893891T, and 50-44369A1, making it a straightforward swap for boat owners replacing a worn or failed OEM unit. Every Sierra part is backed by Sierra's customer satisfaction warranty, giving buyers confidence in fit and function. Whether performing a routine replacement or restoring a non-starting outboard, the 18-5602 provides a reliable, marine-rated solution built specifically for the harsh operating environment of outboard engines.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5602\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 12.13 x 4.49 x 4.02 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.39 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1.4 KW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Type:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 747730043913\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e Meets SAE J1171 and ISO 8846\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Outboard Starter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e35-40 HP, 2 cylinder models\u003c\/li\u003e\n\u003cli\u003e50 HP, 4 cylinder models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury 50-67341\u003c\/li\u003e\n\u003cli\u003eMercury 50-58788A3\u003c\/li\u003e\n\u003cli\u003eMercury 50-893891T\u003c\/li\u003e\n\u003cli\u003eMercury 50-44369A1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat Mercury outboard models does the Sierra 18-5602 starter fit?\u003c\/strong\u003e The Sierra 18-5602 fits Mercury outboard 35-40 HP 2 cylinder models and 50 HP 4 cylinder models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Mercury part numbers does the 18-5602 replace?\u003c\/strong\u003e It replaces Mercury part numbers 50-67341, 50-58788A3, 50-893891T, and 50-44369A1, so any of these OEM numbers can be cross-referenced to Sierra 18-5602.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5602 a genuine Mercury part or aftermarket?\u003c\/strong\u003e The 18-5602 is an aftermarket Sierra starter engineered to meet or exceed the original Mercury equipment it replaces, not a Mercury-branded part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5602 starter weigh?\u003c\/strong\u003e The Sierra 18-5602 outboard starter weighs 7.39 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this starter?\u003c\/strong\u003e The Sierra 18-5602 measures 12.13 x 4.49 x 4.02 inches (length x width x height).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat marine standards does the 18-5602 meet?\u003c\/strong\u003e This starter meets SAE J1171 and ISO 8846, the standards covering marine electrical and ignition protection safety.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat features help the 18-5602 last longer than a worn-out starter?\u003c\/strong\u003e High quality magnets and field coils provide better starting torque, while double sealed housings and high quality brushes on the 18-5602 extend service life in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the wattage and phase type of the 18-5602 starter?\u003c\/strong\u003e The Sierra 18-5602 is rated at 1.4 KW and uses a three phase design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-5602 come with a warranty?\u003c\/strong\u003e Yes, the 18-5602 is covered under Sierra's customer satisfaction warranty like all Sierra parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-5602?\u003c\/strong\u003e The order includes one Sierra 18-5602 outboard starter unit; no additional mounting hardware is specified.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988218654939,"sku":"SIE-18-5602","price":190.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5602__54859.1722511774.500.750.jpg?v=1785187990"},{"product_id":"sierra-18-5608-outboard-starter-for-mercury-mariner-2-5l-3-4l-135-jet-models-replaces-50-893893-12v-counter-clockwise","title":"Sierra 18-5608 Outboard Starter, 12 Volt, Replaces 50-893893\/50-44414\/50-44415\/13310T","description":"\u003cp\u003eThe Sierra 18-5608 is a 12 volt outboard starter built to crank marine engines reliably in the harsh conditions boats operate in every day. It is a universal-fit starter, engineered as a direct replacement for the original equipment starter it supersedes, and is constructed of metal for durability in a marine environment. Sierra designs this starter to meet or exceed the performance of the original equipment part it replaces, and Sierra supplies OEM engine manufacturers and boat builders with parts on a daily basis, so this unit is built to the same standard used in factory production.\u003c\/p\u003e\u003cp\u003eThis starter is rated at 1.4 kW output and 12 volts, matching the electrical demands of the outboard engines it is designed to service. It measures 5 x 5 x 13 inches and weighs 8.95 pounds, giving installers a clear reference for mounting clearance and shipping weight before ordering. Whether you are replacing a worn-out starter that is cranking slowly or failing to engage, or doing preventive maintenance on an older outboard, the 18-5608 is sized as a one-for-one replacement using the OEM cross-reference numbers below.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5608\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1.4 KW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.95 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5 x 5 x 13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 747730043968\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00747730043968\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit outboard starter; confirm your engine's original starter part number against the OEM cross-reference list below before ordering.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e50-893893\u003c\/li\u003e\n\u003cli\u003e50-44414\u003c\/li\u003e\n\u003cli\u003e50-44415\u003c\/li\u003e\n\u003cli\u003e13310T\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for the Sierra 18-5608 outboard starter?\u003c\/strong\u003e The Sierra part number is 18-5608, a 12 volt outboard starter rated at 1.4 kW.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5608 fit my outboard engine?\u003c\/strong\u003e The 18-5608 is listed as a universal fit outboard starter, but you should confirm compatibility by matching your engine's original starter part number against the OEM cross-reference numbers 50-893893, 50-44414, 50-44415, and 13310T before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the Sierra 18-5608 replace?\u003c\/strong\u003e This starter replaces OEM numbers 50-893893, 50-44414, 50-44415, and 13310T.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5608 a genuine OEM starter or an aftermarket replacement?\u003c\/strong\u003e The 18-5608 is an aftermarket Sierra replacement, engineered to meet or exceed the performance of the original equipment starter it replaces rather than being a factory OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the Sierra 18-5608 outboard starter?\u003c\/strong\u003e It is a 12 volt starter with a rated output of 1.4 kW.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-5608 made of?\u003c\/strong\u003e The 18-5608 outboard starter is constructed of metal for durability in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5608 weigh and what are its dimensions?\u003c\/strong\u003e The 18-5608 weighs 8.95 pounds and measures 5 x 5 x 13 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the Sierra 18-5608?\u003c\/strong\u003e The package includes one Sierra 18-5608 outboard starter unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my old starter needs to be replaced with the 18-5608?\u003c\/strong\u003e Slow cranking, a starter that fails to engage, or a worn original unit matching the 50-893893, 50-44414, 50-44415, or 13310T cross-reference numbers are signs it is time to install the 18-5608.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-5608 carry a warranty?\u003c\/strong\u003e Yes, the 18-5608 is backed by a limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of the 18-5608 straightforward for a boat owner?\u003c\/strong\u003e As a direct cross-reference replacement for 50-893893, 50-44414, 50-44415, and 13310T, the 18-5608 is designed to install in the same location and mounting configuration as the starter it replaces.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988218687707,"sku":"SIE-18-5608","price":202.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5608__80457.1722499462.500.750.jpg?v=1785188707"},{"product_id":"sierra-18-5610-outboard-starter-for-mercury-mariner-65-175-hp-1973-1988-replaces-oem-50-57465a1","title":"Sierra 18-5610 Outboard Starter, Replaces Mercury 50-893892T and 50-66015-1","description":"\u003cp\u003eThe Sierra 18-5610 is an outboard starter motor built as a direct cross-reference replacement for Mercury outboard starters, including Mercury part numbers 50-893892T and 50-66015-1. It is constructed with a metal housing for durability in the marine engine compartment and is rated at 1.4 KW output. The starter measures 12.4 x 4.3 x 4.1 inches and weighs 7.47 pounds.\u003c\/p\u003e\u003cp\u003eThis starter is intended for Mercury outboard engines within the serial number ranges C100000 and up, and D283222 and up. Sierra engineers replacement starters to meet or exceed the performance of the original equipment part being replaced, giving boat owners a dependable option when an OEM starter needs to be swapped out. The compact form factor is designed to install in place of the original unit without modification to the mounting points.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5610\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.47 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 12.4 x 4.3 x 4.1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1.4 KW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 747730043975\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 50-893892T, 50-66015-1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury outboard engines, serial number C100000 and up\u003c\/li\u003e\n\u003cli\u003eMercury outboard engines, serial number D283222 and up\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e50-893892T\u003c\/li\u003e\n\u003cli\u003e50-66015-1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-5610 outboard starter fit?\u003c\/strong\u003e The Sierra 18-5610 fits Mercury outboard engines within the serial number ranges C100000 and up, and D283222 and up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5610 a direct replacement for Mercury 50-893892T?\u003c\/strong\u003e Yes, the Sierra 18-5610 cross-references directly to Mercury part number 50-893892T as well as 50-66015-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-5610 cross-reference?\u003c\/strong\u003e The 18-5610 replaces Mercury numbers 50-893892T and 50-66015-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the power output of the 18-5610 starter?\u003c\/strong\u003e This starter is rated at 1.4 KW.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5610 weigh?\u003c\/strong\u003e The 18-5610 outboard starter weighs 7.47 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-5610 starter?\u003c\/strong\u003e It measures 12.4 x 4.3 x 4.1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-5610 starter made of?\u003c\/strong\u003e The 18-5610 is constructed with a metal housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5610 a genuine Sierra part or a generic aftermarket unit?\u003c\/strong\u003e The 18-5610 is a genuine Sierra-branded outboard starter, engineered to meet or exceed the performance of the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-5610?\u003c\/strong\u003e Ordering the 18-5610 gets you the complete outboard starter motor unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5610 require any modification to install?\u003c\/strong\u003e The 18-5610 is built as a direct cross-reference replacement for Mercury 50-893892T and 50-66015-1, so it is designed to install at the original mounting points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat serial number range should I check before ordering the 18-5610?\u003c\/strong\u003e Confirm your Mercury outboard's serial number falls in the C100000-and-up range or the D283222-and-up range before ordering the 18-5610.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988221112539,"sku":"SIE-18-5610","price":233.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5610__61749.1722496811.500.750.jpg?v=1785188218"},{"product_id":"outboard-starter-for-johnson-evinrude-175-hp-1992-replaces-omc-432925-sierra-18-5612-counter-clockwise-rotation","title":"Sierra 18-5612 Outboard Starter - Replaces OMC 432925, 586286, 586287 - Fits Johnson\/Evinrude 150-175 HP","description":"\u003cp\u003eThe Sierra 18-5612 is a replacement outboard starter built for Johnson and Evinrude outboards, delivering the cranking power needed to bring these engines to life reliably season after season. It is designed as a direct replacement for the original equipment starter, meeting or exceeding the performance of the part it replaces.\u003c\/p\u003e\u003cp\u003eThis starter is rated at 50 amps on a single-phase configuration, giving it the output required for the outboard models it is built for. It measures 12 x 4.5 x 4 inches and weighs 5.56 pounds, matching the footprint and mounting of the original starter it replaces so installation follows the same steps as removing and reinstalling the factory unit.\u003c\/p\u003e\u003cp\u003eSierra 18-5612 covers two distinct outboard applications: 150 HP and 175 HP 60-degree loopers from 1991-99, and 150 HP thru 175 HP V-6 outboards from 1997-03. It cross-references to Evinrude\/Johnson starter numbers 586286 and 586287 as well as OMC 432925, so it is a straightforward swap for any of these original part numbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5612\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Outboard Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 50 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Type:\u003c\/strong\u003e Single phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.56 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 12 x 4.5 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 747730043999\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-References:\u003c\/strong\u003e Evinrude\/Johnson 586286, 586287, OMC 432925, Arco 5391, Mallory 9-15032\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e150 HP and 175 HP, 60-degree loopers, 1991-99\u003c\/li\u003e\n\u003cli\u003e150 HP thru 175 HP, V-6, 1997-03\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvinrude\/Johnson 586286\u003c\/li\u003e\n\u003cli\u003eEvinrude\/Johnson 586287\u003c\/li\u003e\n\u003cli\u003eOMC 432925\u003c\/li\u003e\n\u003cli\u003eArco 5391\u003c\/li\u003e\n\u003cli\u003eMallory 9-15032\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards does the Sierra 18-5612 starter fit?\u003c\/strong\u003e It fits 150 HP and 175 HP 60-degree looper outboards from 1991-99, as well as 150 HP thru 175 HP V-6 outboards from 1997-03.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM starter numbers does the 18-5612 replace?\u003c\/strong\u003e The Sierra 18-5612 cross-references to Evinrude\/Johnson 586286 and 586287, as well as OMC 432925, making it a direct swap for any of those original starters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other cross-reference numbers for this starter?\u003c\/strong\u003e Yes, the 18-5612 also interchanges with Arco 5391 and Mallory 9-15032, in addition to the Evinrude\/Johnson and OMC numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5612 starter weigh?\u003c\/strong\u003e It weighs 5.56 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-5612 outboard starter?\u003c\/strong\u003e The unit measures 12 x 4.5 x 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage rating of the 18-5612 starter?\u003c\/strong\u003e It is rated at 50 amps on a single-phase configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5612 a genuine OEM part or aftermarket?\u003c\/strong\u003e The 18-5612 is a Sierra aftermarket starter engineered to meet or exceed the performance of the original equipment starter it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5612 fit both the 60-degree looper and V-6 engine families?\u003c\/strong\u003e Yes, this single part number, Sierra 18-5612, covers both the 150-175 HP 60-degree looper outboards (1991-99) and the 150-175 HP V-6 outboards (1997-03).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-5612?\u003c\/strong\u003e You receive one Sierra 18-5612 outboard starter, ready to install in place of the original unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5612 bolt in place of my original Evinrude\/Johnson starter without modification?\u003c\/strong\u003e Yes, since it is a direct cross-reference for Evinrude\/Johnson 586286, 586287, and OMC 432925, the 18-5612 is built to install using the same mounting as the original starter.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988221178075,"sku":"SIE-18-5612","price":158.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5612__06609.1737898358.500.750.jpg?v=1785188319"},{"product_id":"outboard-starter-for-mercury-6-15-hp-18-25-hp-replaces-50-90983t1-10-tooth-drive-sierra-18-5611","title":"Sierra 18-5611 Outboard Starter, Replaces 50-90983T1, Fits 6-15 HP (1986-96) \u0026 18-25 HP (1980-87), 10 Tooth Drive Gear","description":"\u003cp\u003eThe Sierra 18-5611 is an outboard starter built as a direct replacement for outboard engines in the 6-15 HP (1986-96) and 18-25 HP (1980-87) range, using a 10 tooth drive gear configuration. It is engineered to restore reliable cranking performance on outboards where the original starter has failed or is showing signs of wear, such as slow cranking, clicking without engagement, or complete no-start conditions tied to the starter motor itself.\u003c\/p\u003e\u003cp\u003eThis starter is rated at 20 amps and 1.4 kW, providing the electrical draw and output needed to turn over the engine consistently in the covered horsepower range. It is finished in white to match OEM outboard cowling and powerhead components. As a Sierra product, it is built to meet or exceed the performance of the original equipment part it replaces, giving boat owners and marine technicians a dependable option for engine maintenance and repair.\u003c\/p\u003e\u003cp\u003eThe 18-5611 is compatible with multiple OEM part numbers, so it can be used as a cross-reference replacement without needing to track down a specific original manufacturer part. It is sized to install using the same mounting configuration as the original starter on the covered engines, with the 10 tooth drive gear matching the flywheel engagement of these outboard applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5611\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 20 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1.4 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Gear:\u003c\/strong\u003e 10 tooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment (Horsepower):\u003c\/strong\u003e 6-15 HP (1986-96); 18-25 HP (1980-87)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9 x 4.75 x 4.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.69 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 747730043982\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 50-90983A-1, 50-90983T1, 50-8M0033984\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6-15 HP outboards (1986-96), 10 tooth drive gear\u003c\/li\u003e\n\u003cli\u003e18-25 HP outboards (1980-87), 10 tooth drive gear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e50-90983A-1\u003c\/li\u003e\n\u003cli\u003e50-90983T1\u003c\/li\u003e\n\u003cli\u003e50-8M0033984\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-5611 starter fit?\u003c\/strong\u003e The 18-5611 fits outboards rated 6-15 HP from 1986-96 and 18-25 HP from 1980-87, using a 10 tooth drive gear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-5611 replace?\u003c\/strong\u003e It replaces OEM numbers 50-90983A-1, 50-90983T1, and 50-8M0033984, so it can be ordered as a direct cross-reference without sourcing the original part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many teeth are on the drive gear of this starter?\u003c\/strong\u003e The 18-5611 starter uses a 10 tooth drive gear, matching the flywheel engagement on its listed 6-15 HP and 18-25 HP outboard applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-5611 starter?\u003c\/strong\u003e It is finished in white, consistent with the cowling and powerhead color on the outboards it fits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the electrical ratings of the 18-5611 starter?\u003c\/strong\u003e This starter is rated at 20 amps and 1.4 kW of output, sized to reliably crank engines in the 6-15 HP and 18-25 HP range it is built for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5611 starter weigh?\u003c\/strong\u003e The Sierra 18-5611 outboard starter weighs 3.69 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the physical dimensions of the 18-5611?\u003c\/strong\u003e The unit measures 9 x 4.75 x 4.75 inches, sized for direct installation in place of the original starter on covered outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5611 a genuine OEM part or aftermarket replacement?\u003c\/strong\u003e It is a Sierra aftermarket replacement starter, built to meet or exceed the performance of the original equipment starter it replaces on 6-15 HP (1986-96) and 18-25 HP (1980-87) outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5611 fit an outboard outside the 6-15 HP or 18-25 HP range?\u003c\/strong\u003e No, the 18-5611 is built specifically for 6-15 HP (1986-96) and 18-25 HP (1980-87) outboards with a 10 tooth drive gear; other horsepower ranges require a different starter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when ordering the 18-5611?\u003c\/strong\u003e Ordering the Sierra 18-5611 gets you one complete outboard starter unit ready to install in place of the original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5611 include a UPC for retail or inventory tracking?\u003c\/strong\u003e Yes, the Sierra 18-5611 starter is identified by UPC 747730043982.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988221669595,"sku":"SIE-18-5611","price":159.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5611__29863.1722496185.500.750.jpg?v=1785187990"},{"product_id":"sierra-18-5619-outboard-starter-for-evinrude-johnson-v6-v8-looper-replaces-omc-584799-586731-ccw-3-phase-1-4-kw","title":"Sierra 18-5619 Outboard Starter, Evinrude Outboard Engines, 8.24 Pounds","description":"\u003cp\u003eThe Sierra 18-5619 is an outboard starter engineered as a direct replacement for Evinrude outboard engines. It is built to meet or exceed the performance of the original equipment starter it replaces, giving boat owners a dependable way to restore reliable cranking power without sourcing a factory unit. Sierra manufactures this starter using metal construction rated at 1.4 KW, sized to deliver the torque needed to turn over a marine outboard engine in the demanding conditions of on-water use.\u003c\/p\u003e\u003cp\u003eThis starter measures 6.5 x 12.13 x 4.5 inches and weighs 8.24 pounds, making it comparable in size and weight to the OEM starter it is designed to replace. It is finished in white and carries a limited warranty. Sierra supplies parts to OEM engine manufacturers and boat builders, and this starter is part of that same production standard, offered here as a standalone replacement part for the Evinrude outboard starter category.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5619\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment Category:\u003c\/strong\u003e Evinrude Outboard Engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.24 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 6.5 x 12.13 x 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1.4 KW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 747730044057\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-5619 starter fit?\u003c\/strong\u003e The Sierra 18-5619 is categorized as a starter for Evinrude outboard engines, sized to replace the factory starter on compatible Evinrude outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this starter weigh?\u003c\/strong\u003e The Sierra 18-5619 outboard starter weighs 8.24 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-5619 starter?\u003c\/strong\u003e It measures 6.5 x 12.13 x 4.5 inches, which is the footprint to account for when checking clearance around the engine mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the starter made of?\u003c\/strong\u003e The Sierra 18-5619 is constructed of metal, matching the durability expected of an outboard cranking motor exposed to marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5619 an OEM or aftermarket starter?\u003c\/strong\u003e It is an aftermarket starter manufactured by Sierra to meet or exceed the performance of the original equipment starter it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-5619 starter?\u003c\/strong\u003e This starter has a white finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wattage is the Sierra 18-5619 rated for?\u003c\/strong\u003e The starter is rated at 1.4 KW.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5619 come with a warranty?\u003c\/strong\u003e Yes, the Sierra 18-5619 outboard starter is backed by a limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part number 18-5619?\u003c\/strong\u003e The order includes one Sierra 18-5619 outboard starter; no additional mounting hardware or wiring is specified as included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I confirm I am ordering the correct starter?\u003c\/strong\u003e Match the Sierra manufacturer part number 18-5619, or the UPC 747730044057, against your engine's starter specification before ordering.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988221702363,"sku":"SIE-18-5619","price":163.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__81608.1753840678.500.750.jpg?v=1785189153"},{"product_id":"outboard-starter-for-mercury-mariner-30-60-hp-2-3-cylinder-replaces-50-822462-sierra-18-5621-3-phase-1-4-kw","title":"Sierra 18-5621 Outboard Starter, Replaces 50-893890T\/50-822462, Fits 30-60 HP 2 \u0026 3 Cylinder Outboards, White","description":"\u003cp\u003eThe Sierra 18-5621 Outboard Starter is a direct-fit replacement starter motor built for outboard engines in the 30-60 HP range with 2 and 3 cylinder configurations. It is designed as a drop-in replacement for the OEM starter it supersedes, matching original mounting and electrical specifications so installation follows the same steps as removing and reinstalling the factory unit. The housing is constructed of metal for durability in the marine environment and is finished in white to match factory outboard color schemes. Electrically, the starter is rated at 1.4 KW, providing the cranking power needed for reliable outboard starts. Sierra manufactures this starter to meet or exceed the performance of the original equipment part it replaces, making it a straightforward upgrade or replacement option for boat owners maintaining their outboard's starting system. This is a universal-fit part within its stated HP and cylinder range, and it ships as a single complete starter unit ready for installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5621\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 12 x 4.5 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1.4 KW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Vehicle Type:\u003c\/strong\u003e Marine personal craft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 747730044071\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury outboards, 30-60 HP, 2 \u0026amp; 3 cylinder\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e50-893890T\u003c\/li\u003e\n\u003cli\u003e50-822462\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-5621 starter fit?\u003c\/strong\u003e The Sierra 18-5621 outboard starter fits outboard engines in the 30-60 HP range with 2 and 3 cylinder configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-5621 replace?\u003c\/strong\u003e It replaces OEM numbers 50-893890T and 50-822462.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5621 a genuine Sierra part or aftermarket?\u003c\/strong\u003e The 18-5621 is manufactured by Sierra as a replacement starter that meets or exceeds the performance of the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-5621 starter?\u003c\/strong\u003e The Sierra 18-5621 outboard starter has a white finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-5621 starter housing made from?\u003c\/strong\u003e The housing is made of metal, which is standard for outboard starter motors exposed to marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5621 starter weigh?\u003c\/strong\u003e It weighs 5.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-5621 outboard starter?\u003c\/strong\u003e The starter measures 12 x 4.5 x 4 inches (L x W x H).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the electrical rating of the Sierra 18-5621?\u003c\/strong\u003e The 18-5621 is rated at 1.4 KW.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5621 come as a complete, ready-to-install unit?\u003c\/strong\u003e Yes, the Sierra 18-5621 ships as a single complete starter motor unit for direct installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5621 work on both 2 cylinder and 3 cylinder outboards?\u003c\/strong\u003e Yes, the 18-5621 is listed as fitting both 2 and 3 cylinder outboards within the 30-60 HP range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5621 a universal-fit starter?\u003c\/strong\u003e Yes, it is designated as a universal fit part within its stated 30-60 HP, 2 \u0026amp; 3 cylinder application range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Sierra 18-5621 compare to the original equipment starter it replaces?\u003c\/strong\u003e Sierra states the 18-5621 meets or exceeds the performance of the original equipment starter it replaces, including OEM numbers 50-893890T and 50-822462.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988221735131,"sku":"SIE-18-5621","price":200.81,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5621__61281.1722503922.500.750.jpg?v=1785188007"},{"product_id":"outboard-starter-for-mercury-force-outboards-replaces-fk616955-f490955-f480955-sierra-18-5613-12v","title":"Sierra 18-5613 Outboard Starter, Replaces Arco 5393, FK616955, 50-819085 and More","description":"\u003cp\u003eThe Sierra 18-5613 Outboard Starter is a 12 volt starter built for outboard motors, offering a direct-fit interchange for a wide range of OEM and aftermarket starter part numbers. It is constructed of metal for durability in a marine environment and is designed as a straightforward replacement for a worn or failed outboard starter, restoring reliable engine cranking without modifying existing wiring or mounts. The starter operates at 12 volts with a 1.4 KW rating and comes as a single unit ready for installation.\u003c\/p\u003e\u003cp\u003eThis starter is cross-referenced against a broad list of Arco, Chrysler, Force, US Marine, and Mallory part numbers, making it a practical replacement option for boat owners who need to match an existing outboard starter by part number. Each unit measures 9.75 x 6 x 4.5 inches and weighs 7.23 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5613\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1.4 KW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 9.75 x 6 x 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.23 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 747730044002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eArco 5393\u003c\/li\u003e\n\u003cli\u003eChrysler\/Force\/US Marine FK616955\u003c\/li\u003e\n\u003cli\u003e50-898265002\u003c\/li\u003e\n\u003cli\u003eF480955\u003c\/li\u003e\n\u003cli\u003eF490955\u003c\/li\u003e\n\u003cli\u003eFS438955\u003c\/li\u003e\n\u003cli\u003eFS489955\u003c\/li\u003e\n\u003cli\u003eFS490955\u003c\/li\u003e\n\u003cli\u003e50-819085\u003c\/li\u003e\n\u003cli\u003e50-F616955-1\u003c\/li\u003e\n\u003cli\u003eF616955\u003c\/li\u003e\n\u003cli\u003e50-853869T\u003c\/li\u003e\n\u003cli\u003e50-853869\u003c\/li\u003e\n\u003cli\u003e50-8190851\u003c\/li\u003e\n\u003cli\u003e50-819085T1\u003c\/li\u003e\n\u003cli\u003eF489955\u003c\/li\u003e\n\u003cli\u003eF438955\u003c\/li\u003e\n\u003cli\u003eF438955-1\u003c\/li\u003e\n\u003cli\u003eF85955-1\u003c\/li\u003e\n\u003cli\u003eFA85955\u003c\/li\u003e\n\u003cli\u003eFS480955\u003c\/li\u003e\n\u003cli\u003eMallory 9-15004\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat part number is this outboard starter?\u003c\/strong\u003e This is the Sierra 18-5613 Outboard Starter, a 12 volt metal-construction starter built for outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5613 replace my existing outboard starter?\u003c\/strong\u003e It is cross-referenced to replace a wide range of numbers including Arco 5393, Chrysler\/Force\/US Marine FK616955, 50-819085, F616955, F480955, F490955, F489955, F438955, F438955-1, F85955-1, FA85955, FS438955, FS480955, FS489955, FS490955, 50-898265002, 50-F616955-1, 50-853869, 50-853869T, 50-8190851, 50-819085T1, and Mallory 9-15004, so if your old starter carries any of those numbers the 18-5613 is a direct match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the Sierra 18-5613 starter?\u003c\/strong\u003e The Sierra 18-5613 Outboard Starter is rated at 12 volts with a 1.4 KW output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-5613 made of?\u003c\/strong\u003e Metal construction is used throughout the Sierra 18-5613 Outboard Starter for durability in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5613 outboard starter weigh?\u003c\/strong\u003e 7.23 pounds is the shipping weight of the Sierra 18-5613 Outboard Starter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sierra 18-5613?\u003c\/strong\u003e 9.75 x 6 x 4.5 inches are the outer dimensions of the Sierra 18-5613 Outboard Starter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-5613 cross-reference to a Mallory starter number?\u003c\/strong\u003e Yes, Mallory 9-15004 is one of the OEM numbers the Sierra 18-5613 Outboard Starter replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5613 an OEM or aftermarket starter?\u003c\/strong\u003e The 18-5613 is a Sierra-brand aftermarket starter manufactured to replace multiple OEM Chrysler, Force, US Marine, and Arco part numbers listed in its cross-reference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many starters come in the box?\u003c\/strong\u003e One Sierra 18-5613 Outboard Starter is included per unit purchased.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-5613?\u003c\/strong\u003e The UPC for the Sierra 18-5613 Outboard Starter is 747730044002.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988222193883,"sku":"SIE-18-5613","price":145.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5613__04423.1753459522.500.750.jpg?v=1785188449"},{"product_id":"sierra-18-5627-outboard-starter-for-evinrude-johnson-20-35-hp-1987-1993-replaces-oem-583473","title":"Sierra 18-5627 Outboard Starter, Replaces 583473, 585059, 585459, 778991, Fits 20-35 HP Models 1987-93","description":"\u003cp\u003eThe Sierra 18-5627 is an outboard starter engineered as a direct replacement for outboard motors in the 20-35 HP range built between 1987 and 1993. It is built from metal construction for durability in a marine environment and is designed to meet or exceed the performance of the original equipment starter it replaces. This starter carries a single phase configuration and measures 10.5 x 4.4 x 4 inches, weighing 5.06 pounds.\u003c\/p\u003e\u003cp\u003eThis starter is a straightforward replacement part for boat owners and marine technicians dealing with a worn, weak, or failed outboard starter on a compatible 20-35 HP outboard. Because it is manufactured to match the fit, form, and function of the original starter it replaces, installation follows the same mounting and wiring configuration as the OEM unit it is swapping out for.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5627\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 10.5 x 4.4 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Type:\u003c\/strong\u003e Single Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 20-35 HP models (1987-93)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-35 HP models (1987-93)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e583473\u003c\/li\u003e\n\u003cli\u003e585059\u003c\/li\u003e\n\u003cli\u003e585459\u003c\/li\u003e\n\u003cli\u003e778991\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-5627 starter fit?\u003c\/strong\u003e The Sierra 18-5627 outboard starter fits 20-35 HP outboard models from 1987-93.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-5627 replace?\u003c\/strong\u003e This starter replaces OEM numbers 583473, 585059, 585459, and 778991.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5627 a direct OEM replacement?\u003c\/strong\u003e Yes, the 18-5627 is designed as a direct replacement for the original starter carrying part numbers 583473, 585059, 585459, or 778991 on compatible 20-35 HP outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-5627 starter made of?\u003c\/strong\u003e The 18-5627 outboard starter is made of metal construction, matching the material of the original equipment unit it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5627 starter weigh?\u003c\/strong\u003e The 18-5627 outboard starter weighs 5.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sierra 18-5627 starter?\u003c\/strong\u003e This starter measures 10.5 x 4.4 x 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5627 have single phase or multi phase wiring?\u003c\/strong\u003e The Sierra 18-5627 outboard starter has a single phase configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if the 18-5627 is the correct starter for my outboard?\u003c\/strong\u003e Confirm your outboard is in the 20-35 HP range and built in the 1987-93 model years, and check whether your original starter carries part number 583473, 585059, 585459, or 778991 -- if so, the Sierra 18-5627 is the correct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sierra manufacture this starter to OEM standards or better?\u003c\/strong\u003e The Sierra 18-5627 is built to meet or exceed the specifications of the original equipment starter it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5627 starter a new unit?\u003c\/strong\u003e The 18-5627 is a new-manufacture outboard starter, not a rebuilt or remanufactured core.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988222226651,"sku":"SIE-18-5627","price":182.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5627__71514.1722353956.500.750.jpg?v=1785188076"},{"product_id":"outboard-starter-for-johnson-evinrude-20-35-hp-1989-up-replaces-omc-583482-sierra-18-5624","title":"Sierra 18-5624 Outboard Starter, Replaces OMC 586279, Fits 40-50 HP Johnson\/Evinrude 1989-99","description":"\u003cp\u003eThe Sierra 18-5624 is a 12 volt DC outboard starter motor built to crank Johnson\/Evinrude 40-50 HP outboards from the 1989-99 model years. It is constructed from alloy steel and metal components for durability in a marine environment and is designed as a direct equivalent to the OMC 586279 starter used on this application. The starter is a complete, ready-to-install unit that bolts in as a factory replacement, restoring reliable engine cranking without modification to the outboard's wiring or mounting hardware.\u003c\/p\u003e\u003cp\u003eSierra manufactures this starter to meet or exceed the performance of the original equipment part it replaces, making it a straightforward swap for boat owners replacing a worn, weak, or failed starter motor. At 5.98 pounds and measuring 10 x 4 x 4 inches, the 18-5624 is sized and weighted to match the original OMC starter footprint on 40-50 HP Johnson\/Evinrude powerheads covered by this application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5624\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard Starter Motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy Steel, Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.98 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 10 x 4 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e 586279\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eJohnson\/Evinrude 40-50 HP outboards, 1989-99\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e586279\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-5624 starter fit?\u003c\/strong\u003e The Sierra 18-5624 is built for Johnson\/Evinrude 40-50 HP outboards from the 1989-99 model years.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5624 a direct replacement for OMC 586279?\u003c\/strong\u003e Yes, the Sierra 18-5624 is designed as a direct equivalent to the OMC 586279 starter used on 40-50 HP Johnson\/Evinrude outboards from 1989-99.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the 18-5624 starter?\u003c\/strong\u003e This Sierra outboard starter operates on 12 volts DC, matching the electrical system of the covered Johnson\/Evinrude 40-50 HP outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5624 starter weigh?\u003c\/strong\u003e The 18-5624 weighs 5.98 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sierra 18-5624 starter?\u003c\/strong\u003e The starter measures 10 x 4 x 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-5624 starter made from?\u003c\/strong\u003e It is constructed from alloy steel and metal components for durability in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5624 work on any Johnson or Evinrude outboard?\u003c\/strong\u003e No, the 18-5624 is specific to Johnson\/Evinrude 40-50 HP outboards from 1989-99; other horsepower ranges and years use different Sierra starter part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5624 a genuine OMC part or aftermarket?\u003c\/strong\u003e The 18-5624 is a Sierra-manufactured aftermarket starter engineered to meet or exceed the performance of the original OMC 586279 starter it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-5624?\u003c\/strong\u003e The Sierra 18-5624 ships as a complete, ready-to-install outboard starter motor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my starter needs replacing with the 18-5624?\u003c\/strong\u003e If a Johnson\/Evinrude 40-50 HP outboard (1989-99) cranks slowly, clicks without turning over, or fails to engage, the original starter is often the cause, and the Sierra 18-5624 is the matching replacement for that application.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988223111387,"sku":"SIE-18-5624","price":144.63,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5624__12099.1722477818.500.750.jpg?v=1785188604"},{"product_id":"outboard-starter-motor-for-140-hp-evinrude-johnson-1993-replaces-omc-585060-sierra-18-5628","title":"Sierra Outboard Starter 18-5628, Replaces OMC 586285, Fits Johnson\/Evinrude 120-140 HP 1985-94 and 130 HP 1995-99","description":"\u003cp\u003eThe Sierra 18-5628 is an outboard starter motor built for Johnson\/Evinrude (OMC\/BRP) outboards, matched to the original equipment 586285 starter it replaces. It is designed as a direct fit for two fitment windows: 120 thru 140 HP outboards from 1985-94, and 130 HP outboards from 1995-99. The starter uses an NSS-spec starter drive paired with a compatible 18-5679 drive assembly (O.E. 586100) featuring a 10-tooth drive gear, and it works with the Sierra 18-5697 drive brush kit (O.E. 385952) for brush service and rebuilds. Because the drive assembly and brush kit are sold as separate part numbers, buyers doing a full rebuild should order those alongside the starter itself rather than assuming they are included.\u003c\/p\u003e\u003cp\u003eThis starter is intended as a bolt-on replacement for the listed Johnson\/Evinrude outboard applications, restoring cranking power without modification to the outboard's electrical system. It ships at 7.46 pounds and measures 6 x 9.63 x 4.5 inches, with a 1.4 KW output rating.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5628\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Number:\u003c\/strong\u003e 586285\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Horsepower:\u003c\/strong\u003e 120 thru 140 (1985-94); 130 (1995-99)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Drive Assembly:\u003c\/strong\u003e 18-5679 (O.E. 586100), 10-tooth drive gear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Drive Brush Kit:\u003c\/strong\u003e 18-5697 (O.E. 385952)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 747730044149\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.46 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 6 x 9.63 x 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1.4 KW\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJohnson\/Evinrude (OMC\/BRP) outboard, 120 thru 140 HP, 1985-94\u003c\/li\u003e\n\u003cli\u003eJohnson\/Evinrude (OMC\/BRP) outboard, 130 HP, 1995-99\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e586285\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards does the Sierra 18-5628 starter fit?\u003c\/strong\u003e The Sierra 18-5628 fits Johnson\/Evinrude (OMC\/BRP) outboards rated 120 thru 140 HP for model years 1985-94, and 130 HP outboards for model years 1995-99.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM starter does 18-5628 replace?\u003c\/strong\u003e It replaces OEM part number 586285 on the applicable Johnson\/Evinrude outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5628 starter weigh?\u003c\/strong\u003e The Sierra 18-5628 outboard starter weighs 7.46 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this starter?\u003c\/strong\u003e The 18-5628 measures 6 x 9.63 x 4.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the starter include the drive assembly?\u003c\/strong\u003e No, the drive assembly is a separate part, 18-5679 (O.E. 586100), and must be ordered separately if needed for the Sierra 18-5628 starter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat drive brush kit is compatible with this starter?\u003c\/strong\u003e The Sierra 18-5697 drive brush kit (O.E. 385952) is compatible with the 18-5628 starter for brush replacement or rebuild work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many teeth are on the compatible drive gear?\u003c\/strong\u003e The compatible drive assembly for the 18-5628 starter uses a 10-tooth drive gear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5628 a genuine OEM part or an aftermarket equivalent?\u003c\/strong\u003e The 18-5628 is a Sierra-branded replacement starter built to match the fit and function of OEM part 586285 for the listed Johnson\/Evinrude outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the power rating of the 18-5628 starter?\u003c\/strong\u003e This starter is rated at 1.4 KW.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5628 fit a 1995 130 HP Evinrude outboard?\u003c\/strong\u003e Yes, the Sierra 18-5628 is listed for 130 HP Johnson\/Evinrude outboards built in 1995-99, which covers a 1995 130 HP model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The Sierra 18-5628 starter carries UPC 747730044149.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988223144155,"sku":"SIE-18-5628","price":185.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5628__00632.1737889568.500.750.jpg?v=1785188305"},{"product_id":"outboard-starter-for-evinrude-johnson-18-40-hp-replaces-oem-392133-sierra-18-5629-12v-marine-starter-motor","title":"Sierra 18-5629 Outboard Starter, Replaces OEM 586278 and 393354, Fits 20-35 HP Evinrude\/Johnson Outboards","description":"\u003cp\u003eThe Sierra 18-5629 is a 12 volt DC outboard starter built as a direct replacement for Evinrude\/Johnson outboard engines. It is engineered to meet or exceed the performance of the original equipment starters it replaces, 586278 and 393354, making it a reliable option when the factory starter has failed or worn out. The housing is constructed of metal for durability in the marine environment, and the unit is finished in white. This starter serves a range of Evinrude\/Johnson outboard applications spanning 20 HP through 35 HP across several model-year windows, so it is important to confirm the horsepower and model year of your outboard against the fitment listed below before ordering. The starter delivers 1.4 KW of output and is sold as the starter motor itself; the corresponding solenoid (18-5655) and drive (18-5697) for these applications are separate part numbers. At 5.34 pounds, it is sized and weighted consistent with a small outboard starter motor. Whether you are replacing a seized starter, restoring an older outboard, or doing routine maintenance, the 18-5629 is built to Sierra's standard for OEM-equivalent form, fit, and function.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5629\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1.4 KW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.34 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9 x 4.75 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 747730044156\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 586278, 393354\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20 HP Evinrude\/Johnson outboards, 1985-88\u003c\/li\u003e\n\u003cli\u003e20 thru 30 HP Evinrude\/Johnson outboards, 1993-98\u003c\/li\u003e\n\u003cli\u003e25 thru 35 HP Evinrude\/Johnson outboards, 1977-88\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e586278\u003c\/li\u003e\n\u003cli\u003e393354\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat horsepower Evinrude\/Johnson outboards does the Sierra 18-5629 starter fit?\u003c\/strong\u003e The Sierra 18-5629 outboard starter fits 20 HP outboards from 1985-88, 20 thru 30 HP outboards from 1993-98, and 25 thru 35 HP outboards from 1977-88.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich OEM part numbers does the 18-5629 replace?\u003c\/strong\u003e It replaces Evinrude\/Johnson OEM starters 586278 and 393354.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the 18-5629 starter?\u003c\/strong\u003e 12 Volts DC, with an output of 1.4 KW.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 18-5629 starter made of?\u003c\/strong\u003e The Sierra 18-5629 outboard starter has a metal housing and is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5629 starter weigh?\u003c\/strong\u003e 5.34 pounds, which is worth factoring in for shipping and installation planning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5629 fit a 1990 model year 20 HP Evinrude outboard?\u003c\/strong\u003e No. The 18-5629 covers 20 HP model years 1985-88 and separately 1993-98, so a 1990 20 HP outboard falls outside both listed ranges - confirm your exact model year before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5629 a genuine Sierra part or an aftermarket equivalent?\u003c\/strong\u003e It is a Sierra-manufactured replacement starter, built to meet or exceed the performance of the original 586278 and 393354 starters it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-5629 starter?\u003c\/strong\u003e The starter measures approximately 9 x 4.75 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5629 include the solenoid?\u003c\/strong\u003e No, the 18-5629 is the starter motor only. The solenoid (18-5655) and drive (18-5697) for these applications are sold as separate part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the same starter used across the 20 HP through 35 HP range?\u003c\/strong\u003e Yes, the Sierra 18-5629 is common across 20 HP (1985-88), 20 thru 30 HP (1993-98), and 25 thru 35 HP (1977-88) Evinrude\/Johnson outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-5629 starter?\u003c\/strong\u003e The UPC is 747730044156.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many amps or watts does the 18-5629 starter draw?\u003c\/strong\u003e The 18-5629 outboard starter is rated at 1.4 KW on a 12 Volt DC system.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988225896667,"sku":"SIE-18-5629","price":147.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5629__37976.1722486370.500.750.jpg?v=1785188859"},{"product_id":"outboard-starter-for-evinrude-johnson-50-60-hp-2-cylinder-motors-replaces-omc-585063-387684-sierra-18-5630-12v","title":"Sierra 18-5630 Outboard Starter, Replaces 586280, Fits Evinrude\/Johnson 50-60 HP 2-Cylinder Outboards","description":"\u003cp\u003eThe Sierra 18-5630 is a direct-fit replacement outboard starter engineered to restart the same cranking performance as the original equipment starter it replaces. Built with a metal housing and internal components rated for 12 Volt DC marine electrical systems, it delivers the torque needed to turn over 2-cylinder outboard powerheads reliably in wet, corrosive marine environments. The starter is a complete, ready-to-install unit measuring 9 x 4.75 x 4.75 inches, sized to bolt directly into the original mounting location without modification.\u003c\/p\u003e\u003cp\u003eThis starter is built to fit Evinrude\/Johnson 2-cylinder outboards, including 50 HP (1972), 55 HP (1978), and 60 HP (1985) powerheads. Sierra manufactures this starter to meet or exceed the specifications of the original equipment part it replaces, making it a reliable choice for boat owners replacing a worn, weak, or failed starter motor.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5630\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9 x 4.75 x 4.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 747730044163\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces (OEM):\u003c\/strong\u003e 586280\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvinrude\/Johnson 50 HP (1972)\u003c\/li\u003e\n\u003cli\u003eEvinrude\/Johnson 55 HP (1978)\u003c\/li\u003e\n\u003cli\u003eEvinrude\/Johnson 60 HP, 2 cylinder (1985)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e586280\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-5630 starter fit?\u003c\/strong\u003e The Sierra 18-5630 is built to fit Evinrude\/Johnson 2-cylinder outboards, specifically the 50 HP (1972), 55 HP (1978), and 60 HP (1985) models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does the 18-5630 replace?\u003c\/strong\u003e It replaces OEM number 586280.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5630 a 12 volt starter?\u003c\/strong\u003e Yes, the 18-5630 is a 12 Volt DC outboard starter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 18-5630 starter made of?\u003c\/strong\u003e It is constructed with a metal housing and internal components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sierra 18-5630 starter?\u003c\/strong\u003e The unit measures 9 x 4.75 x 4.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5630 starter weigh?\u003c\/strong\u003e The Sierra 18-5630 weighs 6.16 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5630 fit a 3-cylinder outboard?\u003c\/strong\u003e No, the 18-5630 is built for 2-cylinder Evinrude\/Johnson outboards at 50 HP, 55 HP, and 60 HP; 3-cylinder applications require a different Sierra starter part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5630 a genuine or aftermarket starter?\u003c\/strong\u003e The 18-5630 is a Sierra-manufactured replacement starter, built to meet or exceed the specification of the original 586280 starter it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5630 come fully assembled and ready to install?\u003c\/strong\u003e Yes, the 18-5630 ships as a complete starter unit that installs in place of the original starter without modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with the Sierra 18-5630 starter?\u003c\/strong\u003e The UPC for the Sierra 18-5630 outboard starter is 747730044163.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988225929435,"sku":"SIE-18-5630","price":164.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5630__12651.1722507943.500.750.jpg?v=1785189200"},{"product_id":"sierra-18-5632-outboard-starter-for-evinrude-johnson-v-4-60-degree-outboards-1997-up-replaces-oem-584980","title":"Sierra 18-5632 Outboard Starter for Johnson\/Evinrude 90, 115 HP 1995-99 (Replaces 586284)","description":"\u003cp\u003eThe Sierra 18-5632 is a replacement outboard starter built to meet or exceed the quality of the original equipment part it replaces. It is designed for Johnson\/Evinrude (OMC\/BRP) outboard engines and is the correct starter for 90 HP and 115 HP looper models from 1995-99. Whether you are restoring a worn-out unit or replacing a starter that has failed to engage or crank the engine, the 18-5632 is a direct match for these Johnson\/Evinrude outboards.\u003c\/p\u003e\u003cp\u003eSierra manufactures its electrical components to consistent quality standards so boat owners get reliable cranking performance without sourcing a used or remanufactured original-equipment unit. The 18-5632 cross-references directly to the original Evinrude\/Johnson part numbers, making it straightforward to confirm fitment against your engine's existing starter before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5632\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 90, 115 HP Johnson\/Evinrude (OMC\/BRP) outboards, 1995-99, looper models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO.E. Part Number:\u003c\/strong\u003e 586284\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.98 x 0.98 x 0.98 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 200 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 747730044187\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eJohnson\/Evinrude (OMC\/BRP) 90, 115 HP looper outboards, 1995-99\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eArco 5399\u003c\/li\u003e\n\u003cli\u003eEvinrude\/Johnson 584980\u003c\/li\u003e\n\u003cli\u003eEvinrude\/Johnson 586284\u003c\/li\u003e\n\u003cli\u003eMallory 9-18110\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-5632 starter fit?\u003c\/strong\u003e The Sierra 18-5632 fits Johnson\/Evinrude (OMC\/BRP) 90 HP and 115 HP looper outboards built from 1995 to 1999.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5632 a direct OEM replacement?\u003c\/strong\u003e Yes, the 18-5632 cross-references to original equipment part number 586284 and is built to meet or exceed the quality of the original starter it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other part numbers does the 18-5632 interchange with?\u003c\/strong\u003e It is interchangeable with Arco 5399, Evinrude\/Johnson 584980, Evinrude\/Johnson 586284, and Mallory 9-18110.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5632 starter weigh?\u003c\/strong\u003e The Sierra 18-5632 outboard starter weighs 4.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-5632 starter?\u003c\/strong\u003e It measures 0.98 x 0.98 x 0.98 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5632 work on 1985-94 or 1995-99 120-140 HP Johnson\/Evinrude engines?\u003c\/strong\u003e No, those horsepower ranges use a different Sierra starter (18-5628); the 18-5632 is specific to the 90 and 115 HP looper models from 1995-99.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this starter new or remanufactured?\u003c\/strong\u003e The Sierra 18-5632 is sold as a new starter, not a rebuilt or remanufactured core.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wattage is the Sierra 18-5632 rated for?\u003c\/strong\u003e The 18-5632 outboard starter is rated at 200 watts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5632 fit a V-6 Crossflow Johnson\/Evinrude outboard?\u003c\/strong\u003e No, the V-6 Crossflow models from 1976-92 use a different starter (18-5640); the 18-5632 is built specifically for 90 and 115 HP looper engines from 1995-99.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-5632?\u003c\/strong\u003e You receive one Sierra 18-5632 outboard starter, ready to install in place of the original Johnson\/Evinrude unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the 18-5632 is correct for my outboard?\u003c\/strong\u003e Check that your Johnson\/Evinrude engine is a 90 HP or 115 HP looper model from 1995-99, or match the original starter's part number against 586284 before ordering the 18-5632.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988226060507,"sku":"SIE-18-5632","price":162.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-5632_lg__03712.1558130105.500.750.jpg?v=1785188395"},{"product_id":"outboard-starter-for-evinrude-johnson-140-hp-1977-replaces-omc-585057-sierra-18-5634","title":"Sierra 18-5634 Outboard Starter Motor, Replaces OMC 586283, Fits 85-115 HP Crossflow Outboards 1973-99","description":"\u003cp\u003eThe Sierra 18-5634 is a starter motor built for outboard engines, engineered to meet or exceed the performance of the original equipment part it replaces. It draws 20 amps and delivers 1.4 KW of output on a single-phase design, giving reliable cranking power for the outboard applications it fits. The starter is compact, measuring 4 x 10.5 x 4.25 inches and weighing 7.19 pounds, making it a straightforward drop-in replacement for the applicable engine range.\u003c\/p\u003e\u003cp\u003eThis starter is designed for 85 thru 115 HP crossflow outboard engines built 1973-99, and it replaces OEM\/OMC part number 586283. Sierra manufactures this component to the same fit, form, and function as the original starter it supersedes, so installation follows the same mounting and wiring points as the OEM unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5634\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 20 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1.4 KW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Type:\u003c\/strong\u003e Single Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4 x 10.5 x 4.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.19 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 747730044194\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 85 thru 115 HP crossflow outboard engines, 1973-99\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e 586283\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e85 thru 115 HP crossflow outboard engines, 1973-99\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e586283\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboard engines does the Sierra 18-5634 starter fit?\u003c\/strong\u003e The 18-5634 fits 85 thru 115 HP crossflow outboard engines built 1973-99.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does the 18-5634 replace?\u003c\/strong\u003e It replaces OEM\/OMC part number 586283.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5634 a genuine Sierra part or aftermarket?\u003c\/strong\u003e The 18-5634 is manufactured by Sierra, a supplier of OEM-equivalent marine parts, and it is designed to meet or exceed the performance of the original starter it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5634 starter weigh?\u003c\/strong\u003e The Sierra 18-5634 outboard starter weighs 7.19 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-5634 starter motor?\u003c\/strong\u003e The starter measures 4 x 10.5 x 4.25 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the electrical rating of the 18-5634 starter?\u003c\/strong\u003e It is rated at 20 amps and 1.4 KW of output, running on a single-phase design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5634 work on a 60 or 70 HP outboard?\u003c\/strong\u003e No, the 18-5634 is designed for 85 thru 115 HP crossflow outboard engines from 1973-99; smaller HP ranges use a different Sierra starter part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5634 include mounting hardware or a starter drive?\u003c\/strong\u003e The listing covers the 18-5634 starter motor itself; check the OEM cross-reference 586283 to confirm compatibility with your existing mounting hardware and drive components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 18-5634 compare to the original OMC starter?\u003c\/strong\u003e The Sierra 18-5634 is built to meet or exceed the specifications of the OEM 586283 starter it replaces, using the same electrical rating and mounting configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-5634 starter?\u003c\/strong\u003e The UPC for the Sierra 18-5634 outboard starter is 747730044194.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988226158811,"sku":"SIE-18-5634","price":131.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__87214.1753840679.500.750.jpg?v=1785188974"},{"product_id":"outboard-starter-for-johnson-evinrude-v6-150-235-hp-replaces-omc-395207-387094-585062-sierra-18-5640","title":"Sierra 18-5640 Outboard Starter for Johnson\/Evinrude V6 Outboards, Replaces OMC 778992","description":"\u003cp\u003eThe Sierra 18-5640 is a replacement outboard starter engineered for Johnson\/Evinrude V6 outboard motors. It is built as a direct cross-reference to the original equipment starter, giving boat owners a straightforward way to restore reliable cranking power without sourcing a discontinued OMC part. The housing and components are constructed of metal for durability in a marine environment, where vibration, moisture, and temperature swings put constant stress on electrical and drive components.\u003c\/p\u003e\u003cp\u003eThis starter is sold under Sierra's own part number, 18-5640, and is packaged at 12.0 inches long by 4.25 inches wide by 4.25 inches high, with a finished weight of 9.05 pounds. It is designed as a bolt-in replacement for the applicable Johnson\/Evinrude V6 outboard starter, so installation follows the same mounting and wiring points as the original unit. Because it is a direct fit-and-function replacement, no modification to the starter mounting bracket or wiring harness should be required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5640\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Length:\u003c\/strong\u003e 12.0 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Width:\u003c\/strong\u003e 4.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Height:\u003c\/strong\u003e 4.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 778992\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282111434\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eJohnson\/Evinrude V6 outboards\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e778992\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-5640 starter fit?\u003c\/strong\u003e The Sierra 18-5640 is built for Johnson\/Evinrude V6 outboard motors as a direct replacement starter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5640 a genuine OEM starter or an aftermarket part?\u003c\/strong\u003e The 18-5640 is a Sierra-branded replacement starter, not an OMC-branded original part, but it is cross-referenced to OEM number 778992 for the same application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM number does the Sierra 18-5640 replace?\u003c\/strong\u003e Sierra part 18-5640 cross-references to OEM number 778992.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5640 starter weigh?\u003c\/strong\u003e The Sierra 18-5640 outboard starter weighs 9.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the 18-5640 starter?\u003c\/strong\u003e The Sierra 18-5640 ships in a package measuring 12.0 inches long by 4.25 inches wide by 4.25 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-5640 starter made of?\u003c\/strong\u003e This starter is constructed of metal, providing durability for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-5640 starter?\u003c\/strong\u003e The Sierra 18-5640 is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes installing the Sierra 18-5640 require any modification?\u003c\/strong\u003e No, the 18-5640 is designed as a direct bolt-in replacement for the applicable Johnson\/Evinrude V6 outboard starter, using the same mounting points as the original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Sierra 18-5640 work on any outboard motor?\u003c\/strong\u003e No, it is application-specific to Johnson\/Evinrude V6 outboard motors and should be matched to that application before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-5640 starter?\u003c\/strong\u003e The UPC for the Sierra 18-5640 outboard starter is 808282111434.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988226846939,"sku":"SIE-18-5640","price":147.52,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Sie-18-5640__97802.1722509523.500.750.jpg?v=1785189010"},{"product_id":"marine-outboard-starter-for-mercury-mariner-30-60-hp-replaces-oem-50-822462-sierra-18-5636","title":"Sierra 18-5636 Outboard Starter, Replaces 50-72467\/50-64975\/50-57465A1, Fits Mercury\/Mariner 140 HP 6-Cyl Inline","description":"\u003cp\u003eThe Sierra 18-5636 is a marine outboard starter built for Mercury and Mariner outboard motors equipped with a 140 HP 6-cylinder inline engine, covering units from serial number 4865678 and up. It is the primary electrical component responsible for cranking the outboard's powerhead to initiate combustion, and it is engineered to serve as a direct cross-reference replacement for the corresponding Mercury\/Mariner OEM starter numbers. The housing is constructed of metal for durability in a marine engine compartment environment, where exposure to vibration, heat, and moisture demands a robust build.\u003c\/p\u003e\u003cp\u003eThis starter is designed as a universal fit unit within its stated engine and serial number range, meaning it is intended to bolt in without modification to qualifying 140 HP 6-cylinder inline Mercury\/Mariner outboards. It measures 11 1\/2 inches in length, with overall dimensions of 12 x 4.5 x 4 inches, and weighs 9 pounds. Buyers replacing a worn, weak, or failed outboard starter on a compatible Mercury\/Mariner 140 HP 6-cylinder inline engine can use the 18-5636 as a like-for-like replacement using the OEM cross-reference numbers below to confirm fit before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5636\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 11 1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 12 x 4.5 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Type:\u003c\/strong\u003e 6 Cylinder Inline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 140 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 747730047942\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury\/Mariner outboard motors, 140 HP, 6 cylinder inline engine, serial number 4865678 and up\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e50-72467\u003c\/li\u003e\n\u003cli\u003e50-64975\u003c\/li\u003e\n\u003cli\u003e50-57465A1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboard motors does the Sierra 18-5636 starter fit?\u003c\/strong\u003e The Sierra 18-5636 is built for Mercury\/Mariner outboard motors with a 140 HP 6-cylinder inline engine, covering units from serial number 4865678 and up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5636 replace OEM starter numbers 50-72467, 50-64975, and 50-57465A1?\u003c\/strong\u003e Yes, the Sierra 18-5636 cross-references directly to Mercury\/Mariner OEM starter numbers 50-72467, 50-64975, and 50-57465A1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Sierra 18-5636 outboard starter?\u003c\/strong\u003e It measures 11 1\/2 inches in length, with overall boxed dimensions of 12 x 4.5 x 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 18-5636 starter made of?\u003c\/strong\u003e The Sierra 18-5636 outboard starter has a metal housing for durability in a marine engine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5636 starter weigh?\u003c\/strong\u003e The 18-5636 weighs 9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5636 a universal fit part?\u003c\/strong\u003e Yes, it is listed as a universal fit starter for the specified 140 HP 6-cylinder inline Mercury\/Mariner engines with serial number 4865678 and up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5636 fit a Mercury 140 Jet model outboard?\u003c\/strong\u003e No. The 140 Jet Mercury\/Mariner outboards with serial number G960499 and below use a different Sierra part number, not the 18-5636.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-5636 starter?\u003c\/strong\u003e The UPC for the Sierra 18-5636 outboard starter is 747730047942.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5636 a genuine Sierra part?\u003c\/strong\u003e Yes, the 18-5636 is manufactured and sold under the Sierra brand as a replacement outboard starter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the serial number of my Mercury\/Mariner outboard matter for fitment?\u003c\/strong\u003e Yes. The Sierra 18-5636 is designated for 140 HP 6-cylinder inline Mercury\/Mariner engines with serial number 4865678 and up, so confirming your engine's serial number against that range is important before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the OEM cross-reference number tell me about compatibility?\u003c\/strong\u003e Because the Sierra 18-5636 replaces Mercury\/Mariner OEM numbers 50-72467, 50-64975, and 50-57465A1, you can match any of those numbers from your old starter to confirm the 18-5636 is the correct replacement.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988226945243,"sku":"SIE-18-5636","price":239.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5636__05045.1722489362.500.750.jpg?v=1785188022"},{"product_id":"sierra-18-5648-outboard-starter-for-johnson-evinrude-70-hp-replaces-oem-586281-585050-386657","title":"Sierra 18-5648 Starter, Replaces Johnson\/Evinrude 586281, Fits 60-75 HP Outboards","description":"\u003cp\u003eThe Sierra 18-5648 is a 12-volt marine starter engineered for Johnson\/Evinrude outboard engines, built to meet SAE J1171 and ISO 8846 marine standards for safe, reliable operation in the marine environment. It uses high quality magnets and field coils to deliver strong starting torque, along with double sealed housings and high quality brushes that extend service life against moisture and vibration common to outboard installations. The metal housing construction is designed to withstand the harsh marine environment while matching or exceeding the performance of the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003eThis starter fits Johnson\/Evinrude 60 HP outboards (1971 model, and the 1986-01 3 cylinder models), 65 HP outboards (1985-01, 3 cylinder models), and 70 HP and 75 HP outboards (1980-01 models). It is a direct cross-reference replacement for OEM part number 586281, making it a straightforward swap for boaters needing to replace a worn or failed starter without sourcing hard-to-find original equipment. As with all Sierra parts, the 18-5648 is backed by Sierra's Industry Leading Customer Satisfaction Warranty, which covers defects in workmanship and materials for the useful life of the product.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5648\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.17 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282111472\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e Meets SAE J1171 and ISO 8846\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJohnson\/Evinrude 60 HP outboard, 1971\u003c\/li\u003e\n\u003cli\u003eJohnson\/Evinrude 60 HP outboard, 1986-01, 3 cylinder\u003c\/li\u003e\n\u003cli\u003eJohnson\/Evinrude 65 HP outboard, 1985-01, 3 cylinder\u003c\/li\u003e\n\u003cli\u003eJohnson\/Evinrude 70 HP and 75 HP outboards, 1980-01\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e586281\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-5648 starter replace?\u003c\/strong\u003e The Sierra 18-5648 is a direct cross-reference replacement for Johnson\/Evinrude OEM part number 586281.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich outboard engines is the 18-5648 starter compatible with?\u003c\/strong\u003e This starter fits Johnson\/Evinrude 60 HP outboards (1971 and 1986-01 3 cylinder models), 65 HP outboards (1985-01, 3 cylinder), and 70 HP and 75 HP outboards (1980-01).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5648 a 12 volt starter?\u003c\/strong\u003e Yes, the 18-5648 is a 12 Volt DC starter designed for the Johnson\/Evinrude outboard models it fits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-5648 starter made of?\u003c\/strong\u003e It has a metal housing, including double sealed housings that protect internal components from moisture in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5648 starter weigh?\u003c\/strong\u003e The Sierra 18-5648 starter weighs 6.17 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5648 meet any marine safety standards?\u003c\/strong\u003e Yes, the Sierra 18-5648 is marine grade and meets SAE J1171 and ISO 8846 standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this starter fit a 3 cylinder 60 HP Johnson\/Evinrude outboard?\u003c\/strong\u003e Yes, the Sierra 18-5648 fits the 1986-01 3 cylinder 60 HP Johnson\/Evinrude outboard, as well as the 1971 60 HP model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5648 covered by a warranty?\u003c\/strong\u003e This starter qualifies for Sierra's Industry Leading Customer Satisfaction Warranty, covering defects in workmanship and materials for the useful life of the product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brushes and magnets does the 18-5648 use?\u003c\/strong\u003e The Sierra 18-5648 uses high quality magnets and field coils along with high quality brushes to provide better starting torque and longer service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-5648 fit 65 HP Johnson\/Evinrude outboards?\u003c\/strong\u003e Yes, it fits the 1985-01 3 cylinder 65 HP Johnson\/Evinrude outboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5648 an aftermarket or genuine Johnson\/Evinrude part?\u003c\/strong\u003e The Sierra 18-5648 is a Sierra-manufactured aftermarket starter engineered to meet or exceed the performance of the original Johnson\/Evinrude 586281 starter it replaces.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988227010779,"sku":"SIE-18-5648","price":158.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5648__03959.1737871290.500.750.jpg?v=1785188022"},{"product_id":"starter-drive-assembly-10-tooth-for-mercury-outboard-replaces-oem-68575-sierra-18-5656","title":"Sierra 18-5656 Starter Drive Assembly, 10 Tooth, Replaces 68575, White","description":"\u003cp\u003eThe Sierra 18-5656 is a 10 tooth starter drive assembly engineered to engage the flywheel ring gear and transmit starter motor torque during engine cranking. The drive features a machined exterior finish in white and is built to Sierra's standard fit, form, and function specifications so it installs and operates the same as the original equipment part it replaces. As the engagement point between the starter motor and the flywheel, the drive assembly is a wear item that spins and retracts with each start cycle, so its threads, springs, and pinion gear teeth need to be in good condition for reliable cranking. This drive assembly directly replaces OEM part number 68575, making it a straightforward like-for-like swap when the original drive is worn, chipped, or no longer engaging smoothly. Sierra parts are backed by Sierra's customer satisfaction warranty, giving buyers confidence in fit and durability. Always confirm the 10 tooth pinion count and part number 18-5656 match your existing starter drive before ordering, since drive assemblies are built in different tooth counts for different starter applications and are not interchangeable across tooth counts.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5656\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Starter Drive Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Count:\u003c\/strong\u003e 10 Tooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 747730044279\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 68575\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eSee the application chart for the specific engine models that use the 10 tooth 18-5656 drive assembly.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e68575\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-5656 starter drive assembly do?\u003c\/strong\u003e It is the drive assembly that engages the starter motor with the engine flywheel ring gear, transmitting cranking torque to start the engine and then retracting once the engine fires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many teeth does the 18-5656 drive have?\u003c\/strong\u003e The 18-5656 is a 10 tooth pinion drive assembly, and the tooth count must match your starter's original drive since tooth counts are not interchangeable between different starter applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does the 18-5656 replace?\u003c\/strong\u003e Part number 18-5656 replaces OEM number 68575, so it can be installed as a direct swap for that original drive assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-5656 drive assembly?\u003c\/strong\u003e The 18-5656 drive assembly has a white finish over its machined construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5656 weigh?\u003c\/strong\u003e The Sierra 18-5656 starter drive assembly weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-5656?\u003c\/strong\u003e Product dimensions for the 18-5656 are 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5656 an OEM or aftermarket part?\u003c\/strong\u003e The 18-5656 is a Sierra aftermarket replacement drive assembly designed to match the fit and function of the original 68575 drive it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if the 18-5656 fits my starter?\u003c\/strong\u003e Confirm both the part number 18-5656 and the 10 tooth pinion count against your existing starter drive assembly before ordering, since different starters use drives with different tooth counts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the finish on the 18-5656 drive?\u003c\/strong\u003e The 18-5656 has a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5656 come with a warranty?\u003c\/strong\u003e Yes, the 18-5656 starter drive assembly is covered under Sierra's customer satisfaction warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with the 18-5656?\u003c\/strong\u003e The Sierra 18-5656 starter drive assembly carries UPC 747730044279.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988227043547,"sku":"SIE-18-5656","price":30.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-5656_lg__25364.1558127840.500.750.jpg?v=1785188474"},{"product_id":"starter-drive-assembly-for-evinrude-johnson-mercury-outboards-replaces-oem-387683-13310-sierra-18-5674","title":"Sierra 18-5674 Outboard Starter - Replaces 5036972 - Fits Johnson, Suzuki 25HP 2006-11","description":"\u003cp\u003eThe Sierra 18-5674 is an outboard starter engineered as a direct replacement for OEM number 5036972, built to restart Johnson and Suzuki 25HP outboards from the 2006-11 model years without modification. It is constructed of metal for durability in the marine environment and is designed to bolt into the factory mounting location so the ignition system cranks the engine the same way the original starter did.\u003c\/p\u003e\u003cp\u003eThis starter is a full-unit replacement rather than a repair kit, so buyers replacing a worn-out, seized, or intermittently failing starter can install it in place of the original part and return the outboard to service. It ships as a single, complete unit ready for installation, and its metal housing and internal components are sized to handle the electrical and mechanical loads of a 25HP outboard starting circuit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5674\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.26 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 9.398 cm L x 9.144 cm W x 4.064 cm H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 747730044323\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Johnson, Suzuki 25HP outboards, 2006-11\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces (OEM):\u003c\/strong\u003e 5036972\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJohnson 25HP, 2006-11\u003c\/li\u003e\n\u003cli\u003eSuzuki 25HP, 2006-11\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e5036972\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-5674 starter fit?\u003c\/strong\u003e The Sierra 18-5674 fits Johnson and Suzuki 25HP outboards from the 2006-11 model years.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does the 18-5674 replace?\u003c\/strong\u003e It replaces OEM number 5036972, so it is a direct swap for that original starter on compatible Johnson and Suzuki 25HP outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5674 a full starter or just a repair part?\u003c\/strong\u003e The 18-5674 is a complete outboard starter unit, not a repair kit, so it installs in place of the original starter as a whole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-5674 starter made of?\u003c\/strong\u003e Metal construction is used for the 18-5674 starter to hold up to the marine operating environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5674 starter weigh?\u003c\/strong\u003e The 18-5674 weighs 0.26 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5674 fit any 25HP outboard?\u003c\/strong\u003e No, the 18-5674 is specified for Johnson and Suzuki 25HP outboards built in the 2006-11 model years, not for other brands or years.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-5674 be installed without other new parts?\u003c\/strong\u003e Yes, the 18-5674 is a complete starter assembly designed to bolt into the factory location that OEM number 5036972 occupied, without requiring additional starter components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5674 come with mounting hardware included?\u003c\/strong\u003e The listing for the Sierra 18-5674 covers the starter unit itself; check that any factory mounting hardware you plan to reuse is in good condition before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-5674 an aftermarket or OEM part?\u003c\/strong\u003e The 18-5674 is a Sierra-branded replacement built to match the fit and function of OEM starter 5036972.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the 18-5674?\u003c\/strong\u003e The Sierra 18-5674 ships in packaging measuring 9.398 cm L x 9.144 cm W x 4.064 cm H.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5674 the right part for a Suzuki 25HP built in 2010?\u003c\/strong\u003e Yes, a 2010 Suzuki 25HP falls within the 2006-11 fitment range covered by the Sierra 18-5674 starter.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988227207387,"sku":"SIE-18-5674","price":30.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-5674_lg__50226.1558128264.500.750.jpg?v=1785187973"},{"product_id":"sierra-18-5678-marine-starter-drive-assembly-replaces-omc-585269-586101-for-johnson-evinrude-outboard-motors","title":"Sierra 18-5678 Starter Drive Assembly, Replaces 387683, for Johnson\/Evinrude Outboard Motors, White","description":"\u003cp\u003eThe Sierra 18-5678 Starter Drive Assembly is a direct replacement drive assembly for Johnson and Evinrude outboard motor starters. This component engages the starter motor with the flywheel ring gear to turn the engine over during starting, and is a common wear item that can fail or stick over time from corrosion, worn splines, or a damaged pinion. Replacing a worn or sticking drive assembly restores reliable starter engagement without the cost of a full starter motor replacement.\u003c\/p\u003e\u003cp\u003eSierra manufactures this drive assembly to work as a direct equivalent for OEM part 387683, so it installs using the same fit and function as the original component it replaces. It is finished in white and built for outboard starter applications where the original drive assembly has worn out or become damaged.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5678\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Starter Drive Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Glass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.33 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Taiwan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282259419\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for Johnson and Evinrude outboard motor starters.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e387683\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-5678 Starter Drive Assembly fit?\u003c\/strong\u003e The Sierra 18-5678 is built for Johnson and Evinrude outboard motor starters, replacing the drive assembly that engages the starter with the flywheel ring gear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5678 a direct replacement for OEM part 387683?\u003c\/strong\u003e Yes, Sierra 18-5678 is manufactured to replace OEM part number 387683, matching its fit and function in the starter assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-5678 drive assembly?\u003c\/strong\u003e It is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5678 Starter Drive Assembly weigh?\u003c\/strong\u003e The Sierra 18-5678 weighs 0.33 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-5678 drive assembly?\u003c\/strong\u003e Item dimensions for the Sierra 18-5678 are 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Sierra 18-5678 manufactured?\u003c\/strong\u003e The country of origin for the Sierra 18-5678 Starter Drive Assembly is Taiwan.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat signs indicate my outboard's drive assembly needs replacement?\u003c\/strong\u003e A starter that spins without engaging the flywheel, grinding noises during cranking, or a starter that fails to turn the engine over can indicate a worn or damaged drive assembly like the one replaced by Sierra 18-5678.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5678 include the full starter motor?\u003c\/strong\u003e No, the Sierra 18-5678 is a starter drive assembly only, not a complete starter motor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-5678 a genuine OEM part or aftermarket?\u003c\/strong\u003e Sierra 18-5678 is an aftermarket replacement engineered to replace OEM part 387683 on Johnson\/Evinrude outboard starters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-5678 drive assembly made of?\u003c\/strong\u003e The Sierra 18-5678 Starter Drive Assembly is made of glass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-5678?\u003c\/strong\u003e The UPC for the Sierra 18-5678 Starter Drive Assembly is 808282259419.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988227240155,"sku":"SIE-18-5678","price":32.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-5678_lg__77450.1558128386.500.750.jpg?v=1785188271"},{"product_id":"sierra-18-5679-starter-drive-assembly-for-johnson-evinrude-9-9-15-hp-4-stroke-1997-up-replaces-omc-585267-10-tooth","title":"Sierra 18-5679 Drive Assembly - Replaces OMC 585267 586100 - for 9.9\/15 HP Evinrude Outboards 1997 \u0026 Up","description":"\u003cp\u003eThe Sierra 18-5679 Drive Assembly is a starter drive assembly built for outboard motors, designed as a direct replacement for the OMC drive assembly used on 9.9\/15 HP Evinrude 4-stroke outboards from 1997 and up. The drive assembly is the component that engages the starter motor with the flywheel to turn the engine over during starting; it is constructed of steel and features a 10-tooth drive gear that matches the original equipment tooth count for proper engagement with the flywheel ring gear.\u003c\/p\u003e\u003cp\u003eSierra manufactures this drive assembly to match OEM specifications, making it a straightforward swap for a worn, stripped, or non-engaging drive assembly on covered applications. It pairs with the Sierra 18-5697 Drive Brush Kit for a complete starter service. Each unit measures 3.25 x 3.25 x 1.5 inches and weighs 0.32 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5679\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3.25 x 3.25 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.32 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Count:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 585267, 586100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 9.9\/15 HP Evinrude 4-stroke outboards, 1997 \u0026amp; Up\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 747730044361\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e 1 Starter Drive Assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e9.9\/15 HP Evinrude 4-stroke outboards, 1997 \u0026amp; Up\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e585267\u003c\/li\u003e\n\u003cli\u003e586100\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-5679 Drive Assembly fit?\u003c\/strong\u003e The Sierra 18-5679 Drive Assembly fits 9.9\/15 HP Evinrude 4-stroke outboards from 1997 and up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-5679 replace?\u003c\/strong\u003e This drive assembly replaces OEM numbers 585267 and 586100.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many teeth does the drive gear have?\u003c\/strong\u003e The Sierra 18-5679 drive assembly has a 10-tooth drive gear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 18-5679 drive assembly made of?\u003c\/strong\u003e It is made of steel, matching the material used in the original equipment drive assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5679 weigh?\u003c\/strong\u003e The Sierra 18-5679 Drive Assembly weighs 0.32 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this drive assembly?\u003c\/strong\u003e The Sierra 18-5679 measures 3.25 x 3.25 x 1.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine OEM part or an aftermarket replacement?\u003c\/strong\u003e The Sierra 18-5679 is a Sierra-manufactured replacement part, built to match the OEM 585267 and 586100 drive assemblies rather than being a genuine OMC part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this drive assembly work with the starter brushes too?\u003c\/strong\u003e The 18-5679 is the drive assembly only; the matching brush kit is the Sierra 18-5697 Drive Brush Kit (replaces OEM 385952), which is a separate part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-5679?\u003c\/strong\u003e Each order includes one Sierra 18-5679 Starter Drive Assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5679 fit a 20 HP or 25 HP Evinrude outboard?\u003c\/strong\u003e No, the Sierra 18-5679 is specified for 9.9\/15 HP Evinrude 4-stroke outboards from 1997 and up; larger HP applications use a different Sierra drive assembly part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my starter drive assembly needs replacement?\u003c\/strong\u003e A starter drive assembly like the Sierra 18-5679 typically needs replacement when the starter spins but fails to engage the flywheel, or when the drive teeth are visibly worn or stripped.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988227862747,"sku":"SIE-18-5679","price":41.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-5679_lg__77241.1558128444.500.750.jpg?v=1785188803"},{"product_id":"sierra-18-5697-starter-drive-brush-spring-kit-replaces-f15164-75384-fits-chrysler-force-outboards","title":"Sierra Outboard Starter Drive Brush Kit 18-5697, Replaces 385952, Fits Evinrude 9.9-50 HP","description":"\u003cp\u003eThe Sierra 18-5697 is a replacement starter drive brush kit for Evinrude outboard motors, designed to restore proper electrical contact inside the starter motor's drive assembly. Over time, starter brushes wear down from repeated engagement, which can lead to weak cranking, intermittent starting, or a starter that fails to engage at all. This brush kit gives outboard owners and marine technicians a direct replacement part for rebuilding the starter rather than replacing the entire unit, which keeps repair costs down and gets the motor back in service faster.\u003c\/p\u003e\u003cp\u003eThe kit is identified by Sierra part number 18-5697 and directly replaces OEM number 385952. It is built to fit a range of Evinrude outboard starter applications spanning multiple horsepower classes, from 9.9 HP up through 50 HP models, across various production years as detailed in the fitment chart below. Because starter drive components vary by horsepower and model year, confirming the correct HP and year range for your outboard before ordering ensures the brush kit matches your specific starter assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5697\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Drive Brush Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Evinrude Outboard Starter Parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 747730044545\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvinrude outboards, 9.9 HP, 1997 \u0026amp; Up, 4 stroke\u003c\/li\u003e\n\u003cli\u003eEvinrude outboards, 20 HP, 1985-88\u003c\/li\u003e\n\u003cli\u003eEvinrude outboards, 20 thru 30 HP, 1993-98\u003c\/li\u003e\n\u003cli\u003eEvinrude outboards, 25 thru 35 HP, 1977-88\u003c\/li\u003e\n\u003cli\u003eEvinrude outboards, 20 thru 30 HP, 1989-92\u003c\/li\u003e\n\u003cli\u003eEvinrude outboards, 25 thru 35 HP, 1997-99, 3 cylinder\u003c\/li\u003e\n\u003cli\u003eEvinrude outboards, 40-50 HP, 1984-88\u003c\/li\u003e\n\u003cli\u003eEvinrude outboards, 50 HP, 1972\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e385952\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-5697 brush kit replace?\u003c\/strong\u003e The Sierra 18-5697 drive brush kit is a direct replacement for OEM number 385952 on applicable Evinrude outboard starters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Evinrude outboards fit this brush kit?\u003c\/strong\u003e This brush kit fits a range of Evinrude outboard starters including 9.9 HP (1997 \u0026amp; Up, 4 stroke), 20 HP (1985-88), 20 thru 30 HP (1993-98 and 1989-92), 25 thru 35 HP (1977-88 and 1997-99, 3 cylinder), 40-50 HP (1984-88), and 50 HP (1972).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 18-5697 an OEM or aftermarket part number?\u003c\/strong\u003e 18-5697 is the Sierra part number for this drive brush kit; it is manufactured as a replacement for the original Evinrude part 385952.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5697 brush kit weigh?\u003c\/strong\u003e The Sierra 18-5697 drive brush kit weighs 0.09 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the 18-5697 kit?\u003c\/strong\u003e The 18-5697 kit is a starter drive brush kit, supplying the replacement brush components for the starter's drive assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this brush kit work with a 25 HP Evinrude from 1980?\u003c\/strong\u003e Yes, the 18-5697 brush kit fits 25 thru 35 HP Evinrude outboards from 1977-88, which covers a 1980 model year.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5697 fit 3-cylinder Evinrude outboards?\u003c\/strong\u003e Yes, this brush kit fits 25 thru 35 HP Evinrude outboards with 3 cylinders from 1997-99.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat symptoms indicate the starter brushes need replacing?\u003c\/strong\u003e Weak or intermittent cranking, or a starter that fails to engage, can indicate worn starter brushes; the Sierra 18-5697 kit replaces these components in applicable Evinrude starters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5697 brush kit compatible with the 9.9 HP 4-stroke Evinrude?\u003c\/strong\u003e Yes, it fits the 9.9 HP Evinrude, 1997 \u0026amp; Up, 4 stroke application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-5697 brush kit?\u003c\/strong\u003e The UPC for the Sierra 18-5697 drive brush kit is 747730044545.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit fit a 40 HP Evinrude from the mid-1980s?\u003c\/strong\u003e Yes, the 18-5697 brush kit fits 40-50 HP Evinrude outboards from 1984-88.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the drive brush kit sold separately from the drive assembly?\u003c\/strong\u003e Yes, 18-5697 is the drive brush kit alone; the corresponding drive assembly for these applications is a separate part.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988228092123,"sku":"SIE-18-5697","price":23.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-5697_lg__87699.1558128492.500.750.jpg?v=1785329175"},{"product_id":"sierra-18-5906-marine-starter-for-volvo-penta-4-cyl-6-cyl-gas-engines-replaces-oem-840808-gear-reduction-12v-cw","title":"Sierra 18-5906 Starter, Replaces Volvo Penta 840808-0, Fits AQ145B AQ151A AQ151B AQ151C 4 Cylinder","description":"\u003cp\u003eThe Sierra 18-5906 is a gear reduction starter built for Volvo Penta 4 cylinder gas inboard engines. It uses a permanent magnet design with an aluminum pinion housing that has 2 threaded mounting holes, and it rotates clockwise to engage the flywheel. Running on a 12 volt system with 1.4 KW of output, this starter is sized to deliver reliable cranking power on the AQ145B, AQ151A, AQ151B, and AQ151C engine applications.\u003c\/p\u003e\u003cp\u003eConstruction is centered on an aluminum housing for reduced weight compared to heavier cast alternatives, while still standing up to the marine engine bay environment. The unit measures 9.02 x 12.99 x 5.98 inches and weighs 6.76 pounds, so installers replacing an existing Volvo Penta starter can expect a comparable footprint. Fitment covers the AQ145B (1979-1985), and the AQ151A, AQ151B, and AQ151C (1985-1989), all 4 cylinder Volvo Penta engines. This starter directly replaces the OEM Volvo Penta 840808-0 unit, making it a straightforward swap for boat owners and marine technicians servicing these engine models.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5906\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999320100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1.4 KW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotation:\u003c\/strong\u003e Clockwise\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePinion Housing:\u003c\/strong\u003e Aluminum, 2 threaded mounting holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarter Type:\u003c\/strong\u003e Gear reduction, permanent magnet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.76 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 9.02 x 12.99 x 5.98 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e VOLVO 840808-0\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVolvo Penta AQ145B, 4 cylinder, 1979-1985\u003c\/li\u003e\n\u003cli\u003eVolvo Penta AQ151A, 4 cylinder, 1985-1989\u003c\/li\u003e\n\u003cli\u003eVolvo Penta AQ151B, 4 cylinder, 1985-1989\u003c\/li\u003e\n\u003cli\u003eVolvo Penta AQ151C, 4 cylinder, 1985-1989\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVOLVO 840808-0\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-5906 starter fit?\u003c\/strong\u003e The Sierra 18-5906 fits the Volvo Penta AQ145B (1979-1985) and the AQ151A, AQ151B, and AQ151C (1985-1989), all 4 cylinder gas inboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5906 a direct replacement for the OEM Volvo Penta starter?\u003c\/strong\u003e Yes, the 18-5906 replaces the OEM Volvo Penta 840808-0 starter and is built to install in the same location without modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and power output does this starter have?\u003c\/strong\u003e The Sierra 18-5906 is a 12 volt starter rated at 1.4 KW of output, sized for Volvo Penta 4 cylinder gas engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5906 a gear reduction or direct drive starter?\u003c\/strong\u003e It is a gear reduction starter with a permanent magnet motor, which provides strong cranking torque in a compact housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pinion housing made of?\u003c\/strong\u003e The pinion housing on the 18-5906 is aluminum and includes 2 threaded mounting holes for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich direction does the starter motor rotate?\u003c\/strong\u003e The Sierra 18-5906 rotates clockwise, matching the flywheel engagement direction required on the Volvo Penta AQ145B and AQ151 series engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5906 starter weigh?\u003c\/strong\u003e This starter weighs 6.76 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sierra 18-5906?\u003c\/strong\u003e The 18-5906 measures 9.02 x 12.99 x 5.98 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5906 fit a 6 cylinder Volvo Penta engine?\u003c\/strong\u003e The Sierra 18-5906 is listed for the Volvo Penta AQ145B and AQ151A\/AQ151B\/AQ151C, which are 4 cylinder engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5906 come with mounting hardware?\u003c\/strong\u003e The product includes the starter unit itself with an aluminum pinion housing featuring 2 threaded mounting holes for attachment to the engine bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra a reputable brand for Volvo Penta replacement starters?\u003c\/strong\u003e Sierra manufactures the 18-5906 as a purpose-built replacement for Volvo Penta 4 cylinder engines, matching the fit and output of the original 840808-0 starter.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988343042267,"sku":"SIE-18-5906","price":163.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-5906_lg__99549.1558128407.500.750.jpg?v=1785188860"},{"product_id":"sierra-18-5907-heavy-duty-marine-starter-replaces-oem-42091-standard-rotation-gm-ford-engines-clockwise-top-mount-rear-entry-no-core","title":"Sierra 18-5907 Heavy-Duty Starter, 9 Tooth Clockwise, Replaces 50-72550A2 - GM \u0026 Ford Opposite Rotation Engines","description":"\u003cp\u003eThe Sierra 18-5907 is a heavy-duty, no-core replacement starter built for opposite rotation GM and Ford marine engines. It is a top mount, rear entry starter with clockwise rotation and a 9 tooth drive gear, and it will also replace bottom mount standard rotation starters. This starter is designed for Mercruiser built 4 cylinder engines including the 165, 170, 180, 190, 470, 485, and 488, as well as Ford 302 CID and 351 CID engines. Note that it will not replace non-starter mounted solenoids -- it is intended for applications where the solenoid is mounted directly on the starter itself. The 18-5907 meets SAEJ1171 standards and pairs with the Sierra 18-5837 solenoid when a replacement solenoid is needed. It ships with no core required, simplifying installation for boat owners and marine technicians replacing a worn or failed starter. As with other Sierra electrical components, this starter is built to meet or exceed the performance of the original equipment part it replaces, making it a straightforward drop-in solution for the listed engine applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5907\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty Rating:\u003c\/strong\u003e Heavy-Duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotation:\u003c\/strong\u003e Clockwise\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Count:\u003c\/strong\u003e 9 tooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top mount, rear entry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso Fits:\u003c\/strong\u003e Bottom mount standard rotation applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility Note:\u003c\/strong\u003e Will not replace non-starter mounted solenoids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Type:\u003c\/strong\u003e Cranking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e SAEJ1171\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Solenoid:\u003c\/strong\u003e 18-5837\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5 x 8 x 13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999875921\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOpposite rotation GM \u0026amp; Ford engines (top mount, rear entry)\u003c\/li\u003e\n\u003cli\u003eFord 302 CID and 351 CID engines\u003c\/li\u003e\n\u003cli\u003eMercruiser built 4 cylinder engines: 165, 170, 180, 190, 470, 485, 488\u003c\/li\u003e\n\u003cli\u003eAlso replaces bottom mount, standard rotation starter applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e50-72550A2\u003c\/li\u003e\n\u003cli\u003e50-79604A3\u003c\/li\u003e\n\u003cli\u003e50-97499A2\u003c\/li\u003e\n\u003cli\u003e50-97499R4\u003c\/li\u003e\n\u003cli\u003e50-72550R2\u003c\/li\u003e\n\u003cli\u003e50-97499R3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-5907 starter fit?\u003c\/strong\u003e The 18-5907 fits opposite rotation GM \u0026amp; Ford engines, including Ford 302 CID and 351 CID engines, and Mercruiser built 4 cylinder engines: 165, 170, 180, 190, 470, 485, and 488.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5907 a top mount or bottom mount starter?\u003c\/strong\u003e It is a top mount, rear entry starter, and it will also replace bottom mount standard rotation starter applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich direction does the 18-5907 starter rotate?\u003c\/strong\u003e Clockwise rotation, designed for opposite rotation GM and Ford engines with a 9 tooth drive gear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-5907 require a core exchange?\u003c\/strong\u003e No, the 18-5907 is sold with no core required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-5907 replace?\u003c\/strong\u003e The 18-5907 replaces 50-72550A2, 50-79604A3, 50-97499A2, 50-97499R4, 50-72550R2, and 50-97499R3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5907 work with any solenoid?\u003c\/strong\u003e It will not replace non-starter mounted solenoids; the matching replacement solenoid is the Sierra 18-5837.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5907 starter weigh?\u003c\/strong\u003e This starter weighs 23.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-5907 starter?\u003c\/strong\u003e The 18-5907 measures 5 x 8 x 13 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the 18-5907 starter rated for?\u003c\/strong\u003e 12 Volts, with a cranking phase type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5907 meet any industry standards?\u003c\/strong\u003e Yes, the 18-5907 meets the SAEJ1171 standard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-5907 be used on Ford-powered I\/O boats?\u003c\/strong\u003e Yes, it fits 302 CID and 351 CID Ford engines in opposite rotation applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5907 a heavy-duty starter?\u003c\/strong\u003e Yes, the 18-5907 is a heavy-duty rated starter designed for marine I\/O and Mercruiser electrical systems.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988344385755,"sku":"SIE-18-5907","price":299.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5907__60177.1753371331.500.750.jpg?v=1785189125"},{"product_id":"marine-starter-for-standard-rotation-gm-ford-engines-heavy-duty-no-core-replaces-oem-42091-mercruiser-17251a4-omc-982195-sierra-18-5908","title":"Sierra 18-5908 Heavy Duty Marine Starter for GM V-8 Engines - Standard Rotation, Top Front Entry Mount","description":"\u003cp\u003eThe Sierra 18-5908 is a heavy duty marine starter built to meet or exceed original equipment quality for GM V-8 stern drive and inboard applications. It is a standard rotation, top-mount, front entry starter designed as a direct equivalent for a wide range of GM V-8 marine engine families, including the 454 Mag. MPI MIE, 460 TRS, 465, 500, 500 Bulldog, and 525 SC. Housed in a durable metal case, the unit is rated at 1.1 KW and is supplied ready to install with no core exchange required, so there is no need to send back a used unit as part of the purchase.\u003c\/p\u003e\u003cp\u003eThis starter is engineered to replace a broad set of OEM and cross-brand starters used across Mercruiser stern drive, OMC stern drive, Crusader, and Pleasurecraft powerplants, making it a straightforward swap for boat owners tracking down a failed or worn starter on a GM-based marine V-8. Confirm your engine's serial number range against the fitment details below before ordering, since several GM V-8 families share this part across different production runs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5908\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotation:\u003c\/strong\u003e Standard Rotation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Top, Front Entry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23.19 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 13.5 x 8 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1.1 KW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Compatibility:\u003c\/strong\u003e GM V-8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999875938\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e454 Mag. MPI MIE, GM V-8, 1998 \u0026amp; Up (serial number L002200 \u0026amp; Up)\u003c\/li\u003e\n\u003cli\u003e460 TRS, GM V-8, 1983-1986 (serial number range 4179554 to 6181046)\u003c\/li\u003e\n\u003cli\u003e465, GM V-8, 1990-1994 (serial number range C849992 to F213244)\u003c\/li\u003e\n\u003cli\u003e500, GM V-8, 1994-1995 (serial number F213293 \u0026amp; Up)\u003c\/li\u003e\n\u003cli\u003e500 Bulldog, GM V-8, 1990-1996 (serial number C577254 \u0026amp; Up)\u003c\/li\u003e\n\u003cli\u003e525 SC, GM V-8, 1991-1993 (serial number range D456000 to D763831)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eArco 30457\u003c\/li\u003e\n\u003cli\u003eCrusader 42091\u003c\/li\u003e\n\u003cli\u003eGLM 74170\u003c\/li\u003e\n\u003cli\u003eMercruiser Stern Drive 17251A4\u003c\/li\u003e\n\u003cli\u003eMercruiser Stern Drive 808011A3\u003c\/li\u003e\n\u003cli\u003eMercruiser Stern Drive 47455\u003c\/li\u003e\n\u003cli\u003eMercruiser Stern Drive 65784A1\u003c\/li\u003e\n\u003cli\u003eMercruiser Stern Drive 76965A1\u003c\/li\u003e\n\u003cli\u003eMercruiser Stern Drive 76965A3\u003c\/li\u003e\n\u003cli\u003eMercruiser Stern Drive 76965A4\u003c\/li\u003e\n\u003cli\u003eMercruiser Stern Drive 99419A3\u003c\/li\u003e\n\u003cli\u003eMercruiser Stern Drive 17251A2\u003c\/li\u003e\n\u003cli\u003eMercruiser Stern Drive 17251A3\u003c\/li\u003e\n\u003cli\u003eMercruiser Stern Drive 808011A4\u003c\/li\u003e\n\u003cli\u003eMercruiser Stern Drive 808011A05\u003c\/li\u003e\n\u003cli\u003eOMC Stern Drive 982195\u003c\/li\u003e\n\u003cli\u003eOMC Stern Drive 984982\u003c\/li\u003e\n\u003cli\u003eOMC Stern Drive 981288\u003c\/li\u003e\n\u003cli\u003eOMC Stern Drive 986007\u003c\/li\u003e\n\u003cli\u003ePleasurecraft RA122009\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-5908 starter fit?\u003c\/strong\u003e The 18-5908 fits several GM V-8 marine engine families, including the 454 Mag. MPI MIE (serial number L002200 \u0026amp; Up), 460 TRS (1983-1986, serial numbers 4179554 to 6181046), 465 (1990-1994, serial numbers C849992 to F213244), 500 (1994-1995, serial number F213293 \u0026amp; Up), 500 Bulldog (1990-1996, serial number C577254 \u0026amp; Up), and 525 SC (1991-1993, serial numbers D456000 to D763831).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5908 a direct replacement for my OEM Mercruiser starter?\u003c\/strong\u003e Yes, the 18-5908 is built to meet or exceed original equipment quality and directly replaces a range of Mercruiser Stern Drive starters including 17251A4, 808011A3, 47455, 65784A1, 76965A1, 76965A3, 76965A4, 99419A3, 17251A2, 17251A3, 808011A4, and 808011A05.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this starter also cross over to OMC or Crusader part numbers?\u003c\/strong\u003e It does. The 18-5908 replaces OMC Stern Drive starters 982195, 984982, 981288, and 986007, Crusader 42091, Arco 30457, GLM 74170, and Pleasurecraft RA122009.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the 18-5908 starter?\u003c\/strong\u003e This starter measures 13.5 x 8 x 6 inches and weighs 23.19 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rotation and mounting style does the 18-5908 use?\u003c\/strong\u003e Standard rotation is used, with a top, front entry mounting configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 18-5908 starter made of?\u003c\/strong\u003e The Sierra 18-5908 has a metal housing and is rated at 1.1 KW.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to send in my old starter as a core exchange?\u003c\/strong\u003e No core exchange is required to purchase the Sierra 18-5908 starter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-5908?\u003c\/strong\u003e The order includes one Sierra 18-5908 starter, ready to install with no additional components required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5908 a genuine part or an aftermarket unit?\u003c\/strong\u003e The 18-5908 is a Sierra-branded heavy duty starter manufactured to meet or exceed original equipment specifications, sold as a new unit rather than a remanufactured core-exchange part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my engine's serial number matches the 18-5908?\u003c\/strong\u003e Check your engine's serial number against the listed ranges, such as L002200 \u0026amp; Up for the 454 Mag. MPI MIE or C577254 \u0026amp; Up for the 500 Bulldog, since GM V-8 engine families were built across multiple serial number breaks that determine correct starter fitment for the 18-5908.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5908 work with a 460 TRS engine?\u003c\/strong\u003e Yes, the 18-5908 is listed for the 460 TRS GM V-8 built between 1983 and 1986, within serial number range 4179554 to 6181046.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size electrical output does the 18-5908 provide?\u003c\/strong\u003e The starter is rated at 1.1 KW, matching the output needed for the GM V-8 marine engines it is designed to fit.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988344451291,"sku":"SIE-18-5908","price":281.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5908__77991.1737888164.500.750.jpg?v=1785188653"},{"product_id":"sierra-18-5909-outboard-starter-motor-for-evinrude-g2-outboard-motors","title":"Sierra 18-5909 Outboard Starter for Evinrude G2 Outboard Motors","description":"\u003cp\u003eThe Sierra 18-5909 is a replacement outboard starter built for Evinrude G2 outboard motors. It is designed to deliver reliable cranking power to get your outboard running, using a three phase design for efficient operation. This starter is a direct fit for the Evinrude G2 outboard application, making it a straightforward swap when your factory starter fails or wears out.\u003c\/p\u003e\u003cp\u003eSierra builds this starter to the fit, form, and function of the original equipment it replaces, so installation follows the same mounting and wiring points as the outboard's factory starter. The unit ships complete and ready to install, with no additional components required beyond the starter itself.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5909\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard Starter Motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Type:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282378851\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eEvinrude G2 outboard motors\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-5909?\u003c\/strong\u003e The 18-5909 is an outboard starter made by Sierra, designed for Evinrude G2 outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5909 fit Evinrude G2 outboards?\u003c\/strong\u003e Yes, the Sierra 18-5909 is built for Evinrude G2 outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5909 starter weigh?\u003c\/strong\u003e It weighs 9.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-5909 starter made from?\u003c\/strong\u003e The 18-5909 outboard starter uses plastic components in its construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5909 a three phase starter?\u003c\/strong\u003e Yes, the Sierra 18-5909 features a three phase design for efficient operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-5909?\u003c\/strong\u003e The Sierra 18-5909 ships as a complete outboard starter, ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5909 a genuine Sierra part?\u003c\/strong\u003e Yes, the 18-5909 is manufactured and sold under the Sierra brand as part number 18-5909.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with the Sierra 18-5909?\u003c\/strong\u003e The Sierra 18-5909 outboard starter carries UPC 808282378851.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-5909 be used to replace a failed outboard starter?\u003c\/strong\u003e Yes, the Sierra 18-5909 is intended as a replacement starter for Evinrude G2 outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of motor is the 18-5909 used on?\u003c\/strong\u003e It is used on Evinrude G2 outboard motors as an outboard starter.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988345925851,"sku":"SIE-18-5909","price":213.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5909__24469.1722359369.500.750.jpg?v=1785188369"},{"product_id":"sierra-18-5910-heavy-duty-marine-starter-for-gm-v-6-v-8-14-1-4-flywheel-bottom-mount-9-tooth-clockwise-replaces-mercruiser-50-12177a2-50-99418a2","title":"Sierra Starter 18-5910, Replaces OMC 984456\/986505, GM V-6 \u0026 V-8 Bottom Mount, 14 1\/4 Inch Flywheel","description":"\u003cp\u003eThe Sierra 18-5910 is a bottom mount starter built for GM V-6 and V-8 marine engines used in OMC Sterndrive and OMC Cobra applications with a 14 1\/4 inch flywheel. It is a standard rotation unit, meaning it turns clockwise, matching the rotation required by these OMC Sterndrive and Cobra engine setups. The housing and internal components are metal construction for durability in the marine engine compartment environment.\u003c\/p\u003e\u003cp\u003eThis starter is built to SAE J1171 standard, the marine industry specification covering ignition protection for starters and other electrical components used in gasoline marine engine spaces, so it is designed to resist becoming a source of ignition for surrounding fuel vapors. If the starter solenoid ever needs replacing separately, Sierra offers a matching replacement solenoid, part number 18-5837, for this starter.\u003c\/p\u003e\u003cp\u003eBecause rotation direction and mounting position are specific to the engine it is installed on, confirm your engine uses standard (clockwise) rotation with a bottom mount configuration and a 14 1\/4 inch flywheel before ordering, since installing a starter with the wrong rotation will not engage the flywheel correctly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5910\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotation:\u003c\/strong\u003e Standard (clockwise)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlywheel Size:\u003c\/strong\u003e 14 1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Compatibility:\u003c\/strong\u003e GM V-6 and V-8 engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e OMC Sterndrive and OMC Cobra starters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 19.34 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Standard:\u003c\/strong\u003e SAE J1171\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Solenoid:\u003c\/strong\u003e 18-5837\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999875945\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOMC Sterndrive and OMC Cobra starters\u003c\/li\u003e\n\u003cli\u003eGM V-6 and V-8 engines\u003c\/li\u003e\n\u003cli\u003eStandard rotation engines (clockwise)\u003c\/li\u003e\n\u003cli\u003e14 1\/4 inch flywheel, bottom mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e984456\u003c\/li\u003e\n\u003cli\u003e986505\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-5910 starter fit?\u003c\/strong\u003e The Sierra 18-5910 fits GM V-6 and V-8 engines used in OMC Sterndrive and OMC Cobra applications with a 14 1\/4 inch flywheel and bottom mount configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5910 a standard or reverse rotation starter?\u003c\/strong\u003e It is a standard rotation starter, meaning it turns clockwise. This is important because OMC Sterndrive and Cobra engines require matching rotation direction for the starter to engage the flywheel properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the Sierra 18-5910 replace?\u003c\/strong\u003e The Sierra 18-5910 replaces OMC 984456 and 986505.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size flywheel does this starter require?\u003c\/strong\u003e The Sierra 18-5910 is designed for engines with a 14 1\/4 inch flywheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sierra 18-5910 mounted on the engine?\u003c\/strong\u003e This starter uses a bottom mount configuration, matching the mounting style of the OMC Sterndrive and OMC Cobra engines it is built for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-5910 starter made of?\u003c\/strong\u003e The 18-5910 starter has a metal housing and internal components, built for durability in a marine engine compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5910 weigh?\u003c\/strong\u003e The Sierra 18-5910 starter weighs 19.34 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-5910 meet marine safety standards?\u003c\/strong\u003e Yes, the 18-5910 is built to SAE J1171, the marine standard for ignition protection on starters and electrical components used in gasoline engine spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the solenoid on the 18-5910 be replaced separately?\u003c\/strong\u003e Yes, Sierra offers a matching replacement solenoid for the 18-5910 starter under part number 18-5837.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5910 an aftermarket or genuine part?\u003c\/strong\u003e The 18-5910 is a Sierra branded starter manufactured as a direct replacement for OMC 984456 and 986505, built to the same SAE J1171 marine standard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5910 work on reverse rotation engines?\u003c\/strong\u003e No, the 18-5910 is a standard (clockwise) rotation starter and is built for standard rotation engines, not reverse rotation applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with the Sierra 18-5910 starter?\u003c\/strong\u003e The Sierra 18-5910 ships as a complete starter unit ready to install on compatible GM V-6 and V-8 OMC Sterndrive and OMC Cobra engines.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988346056923,"sku":"SIE-18-5910","price":257.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5910__10311.1753369000.500.750.jpg?v=1785188828"},{"product_id":"sierra-18-5911-heavy-duty-marine-starter-for-gm-engines-bottom-mount-standard-rotation-replaces-mercruiser-50-864340a2-omc-981078-volvo-penta-834893-0-fits-gm-3-0-5-0-5-7-7-4l-sterndrive-1970-1978","title":"Sierra 18-5911 Heavy-Duty Marine Starter, Replaces 981078, for GM Engines 100-245 HP 1970-1978","description":"\u003cp\u003eThe Sierra 18-5911 is a heavy-duty, bottom mount marine starter engineered for GM engines with a straight across bolt pattern. It is built for GM applications rated 100-245 HP from 1970-1978, delivering standard clockwise rotation for reliable engine cranking in marine environments. The starter is manufactured to meet SAE J1171 and ISO 8846 marine ignition-protection standards, so it is safe for use around gasoline engines and fuel vapors.\u003c\/p\u003e\u003cp\u003eInside, the 18-5911 uses high quality magnets and field coils to provide stronger starting torque, along with high quality brushes for longer service life. The housing is double sealed to help protect internal components from moisture and corrosion, a key requirement for marine duty cycles. This starter is sold on a no-core basis, meaning no used core return is required. A matching replacement solenoid, Sierra 18-5837, is available separately if the solenoid needs to be serviced independently of the starter motor.\u003c\/p\u003e\u003cp\u003eBecause the 18-5911 mounts on the bottom with a straight across bolt pattern, it is intended as a direct fit for GM-based marine engines using that mounting configuration within the 100-245 HP, 1970-1978 range. Every Sierra part is backed by Sierra's Industry Leading Customer Satisfaction Warranty, which covers defects in workmanship and materials for the useful life of the product.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5911\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Starter (Heavy-Duty)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Requirement:\u003c\/strong\u003e No Core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Application:\u003c\/strong\u003e GM Engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower Range:\u003c\/strong\u003e 100-245 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Years:\u003c\/strong\u003e 1970-1978\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom Mount, Straight Across Bolt Pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotation:\u003c\/strong\u003e Standard Clockwise\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine Standards Compliance:\u003c\/strong\u003e SAE J1171, ISO 8846\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e Double Sealed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Solenoid:\u003c\/strong\u003e 18-5837\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 19.98 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGM engines, bottom mount, straight across bolt pattern\u003c\/li\u003e\n\u003cli\u003e100-245 HP\u003c\/li\u003e\n\u003cli\u003e1970-1978\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e981078\u003c\/li\u003e\n\u003cli\u003e982121\u003c\/li\u003e\n\u003cli\u003e983444\u003c\/li\u003e\n\u003cli\u003e983790\u003c\/li\u003e\n\u003cli\u003e985966\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-5911 starter fit?\u003c\/strong\u003e The 18-5911 is designed for GM engines using a bottom mount with a straight across bolt pattern, covering the 100-245 HP range for model years 1970-1978.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5911 require a core return?\u003c\/strong\u003e No, this starter is sold on a no-core basis, so there is no need to return a used starter core.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rotation direction of this starter?\u003c\/strong\u003e Standard clockwise rotation is used on the Sierra 18-5911 heavy-duty starter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich OEM part numbers does the 18-5911 replace?\u003c\/strong\u003e It replaces OEM numbers 981078, 982121, 983444, 983790, and 985966.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5911 starter weigh?\u003c\/strong\u003e The Sierra 18-5911 weighs 19.98 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat marine safety standards does this starter meet?\u003c\/strong\u003e It is built to meet SAE J1171 and ISO 8846 marine ignition-protection standards, which govern electrical equipment safety around fuel vapors on boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a solenoid included with the 18-5911 starter?\u003c\/strong\u003e The starter itself does not include a listed solenoid in the box; the matching replacement solenoid for the 18-5911 is Sierra part 18-5837, sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 18-5911 mounted?\u003c\/strong\u003e This starter uses a bottom mount configuration with a straight across bolt pattern, matching the GM engine mounting layout it is designed for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes this a heavy-duty starter?\u003c\/strong\u003e The 18-5911 uses high quality magnets and field coils for stronger starting torque, plus high quality brushes and a double sealed housing for longer service life in marine duty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5911 covered by a warranty?\u003c\/strong\u003e Yes, the 18-5911 is covered under Sierra's Industry Leading Customer Satisfaction Warranty, which covers defects in workmanship and materials for the useful life of the product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the housing on the 18-5911 double sealed?\u003c\/strong\u003e The double sealed housing on this starter helps keep moisture out of the internal components, which is important for the wet, corrosive conditions found in marine engine compartments.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988346155227,"sku":"SIE-18-5911","price":260.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5911__63256.1722370406.500.750.jpg?v=1785188804"},{"product_id":"sierra-18-5913-1-marine-starter-for-late-model-gm-4-3l-5-0l-5-7l-14-inch-flywheel-replaces-50-812428a3-12v-11-tooth-gear-reduction","title":"Sierra 18-5913-1 Marine Starter for GM V-8 Engines, 12 3\/4 Inch Flywheel","description":"\u003cp\u003eThe Sierra 18-5913-1 is a marine starter engineered for GM V-8 powered stern drive and inboard engines, built to hold up against the corrosion, moisture, and vibration that shorten the life of automotive-grade starters. It is designed for a 12 3\/4 inch flywheel and covers a wide range of GM V-8 engine families including 454 Mag., 454 Mag. MPI, 454 Mag. MPI MIE, 454 EFI Ski, 465, 500, 500 Bulldog, and 502 Mag. Models across multiple production serial-number ranges.\u003c\/p\u003e\u003cp\u003eThis starter has been re-engineered from earlier designs to address the most common marine starter failure points. It features an improved solenoid design for more reliable engagement, an upgraded connection between the solenoid and commutator brushes, an upgraded planetary seal to help reduce water intrusion, and a more robust clutch gear spring to extend service life under repeated cranking cycles. The housing and internal components are metal construction, and the unit weighs 9.1 pounds with overall dimensions of 11.6 x 7.7 x 6.6 inches. It draws 1.4 kilowatts and is backed by a limited lifetime warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5913-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 11.6 x 7.7 x 6.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1.4 kilowatts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlywheel Size:\u003c\/strong\u003e 12 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Compatibility:\u003c\/strong\u003e GM V-8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282377786\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e454 Mag. GM V-8, 1986-1994 (serial range A631894-F304999)\u003c\/li\u003e\n\u003cli\u003e454 Mag. GM V-8, 1995-1997 (serial range F305000-K999999)\u003c\/li\u003e\n\u003cli\u003e454 Mag. MPI GM V-8, 1994-1997 (serial range F115700-K999999)\u003c\/li\u003e\n\u003cli\u003e454 Mag. MPI GM V-8, 1998 \u0026amp; Up (serial L010029 \u0026amp; Up)\u003c\/li\u003e\n\u003cli\u003e454 Mag. MPI MIE GM V-8, 1996-1997 (serial range F820100-K999999)\u003c\/li\u003e\n\u003cli\u003e454 EFI Ski GM V-8, 1995-1996 (serial range F215800-F820099)\u003c\/li\u003e\n\u003cli\u003e465 GM V-8, 1990-1994 (serial range C849992-F213244)\u003c\/li\u003e\n\u003cli\u003e500 GM V-8, 1994-1997 (serial F213293 \u0026amp; Up)\u003c\/li\u003e\n\u003cli\u003e500 Bulldog GM V-8, 1990-1996 (serial C577254 \u0026amp; Up)\u003c\/li\u003e\n\u003cli\u003e502 Mag. Bravo GM V-8, 1990-1993 (serial range C878221-F114528)\u003c\/li\u003e\n\u003cli\u003e502 Mag. MPI GM V-8, 1993-1997 (serial range D840650-K999999)\u003c\/li\u003e\n\u003cli\u003e502 Mag. MPI GM V-8, 1998 \u0026amp; Up (serial L017000 \u0026amp; Up)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-5913-1 starter fit?\u003c\/strong\u003e The 18-5913-1 fits GM V-8 marine engines across several families, including 454 Mag., 454 Mag. MPI, 454 Mag. MPI MIE, 454 EFI Ski, 465, 500, 500 Bulldog, and 502 Mag., spanning production years from 1986 through 1998 and up depending on the specific engine serial number range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size flywheel does this starter require?\u003c\/strong\u003e This starter is designed for a 12 3\/4 inch flywheel, matching the late model GM V-8 configuration it is built for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5913-1 starter weigh?\u003c\/strong\u003e It weighs 9.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sierra 18-5913-1 starter?\u003c\/strong\u003e It measures 11.6 x 7.7 x 6.6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the starter housing made of?\u003c\/strong\u003e The 18-5913-1 is constructed of metal for durability in marine engine compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat electrical rating does this starter draw?\u003c\/strong\u003e The 18-5913-1 is rated at 1.4 kilowatts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this starter an improvement over older marine starter designs?\u003c\/strong\u003e Yes, the 18-5913-1 has been re-engineered with an improved solenoid design, an upgraded connection between the solenoid and commutator brushes, an upgraded planetary seal to help reduce water intrusion, and a more robust clutch gear spring for longer service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5913-1 come with a warranty?\u003c\/strong\u003e Yes, it is backed by a limited lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if 18-5913-1 is the correct starter for my 454 Mag. Engine?\u003c\/strong\u003e Confirm your 454 Mag. Engine's serial number falls within one of the covered ranges: A631894-F304999 for 1986-1994, F305000-K999999 for 1995-1997, F115700-K999999 for the MPI variant 1994-1997, or L010029 and up for 1998 and later MPI models, since the 18-5913-1 covers these specific ranges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-5913-1?\u003c\/strong\u003e Ordering the Sierra 18-5913-1 includes one complete starter unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5913-1 fit the 502 Mag. Engine?\u003c\/strong\u003e Yes, it fits the 502 Mag. Bravo GM V-8 (serial range C878221-F114528, 1990-1993) as well as the 502 Mag. MPI GM V-8 for 1993-1997 (serial range D840650-K999999) and 1998 and up (serial L017000 and up).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5913-1 designed to resist water intrusion?\u003c\/strong\u003e Yes, this starter includes an upgraded planetary seal specifically engineered to help reduce water intrusion in marine environments.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988346319067,"sku":"SIE-18-5913-1","price":213.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5913-1_b__83796.1753840686.500.750.jpg?v=1785189098"},{"product_id":"marine-starter-for-mercruiser-4-3l-5-0l-5-7l-replaces-50-806965a4-11-tooth-permanent-magnet-12-3-4-in-flywheel-sierra-18-5919-1","title":"Sierra 18-5919-1 Starter for Late Model GM Engines, 14 Inch Flywheel","description":"\u003cp\u003eThe Sierra 18-5919-1 is a 12-volt marine starter engineered for late model GM engines using a 14 inch diameter flywheel. Built specifically to withstand the harsh conditions of marine use, this starter has been re-engineered from Sierra's most popular starter design to hold up against water intrusion and the constant vibration and moisture exposure found in inboard and sterndrive engine compartments. Upgrades over earlier designs include a stronger connection between the solenoid and commutator brushes, an upgraded planetary seal, and a reinforced clutch gear spring, all aimed at extending service life and improving reliability when starting is critical.\u003c\/p\u003e\u003cp\u003eThe housing is finished in black and the unit is constructed of metal for durability in a marine engine bay. This starter is rated at 55 amps; for applications requiring higher output, Sierra offers a 65 amp upgrade option under a separate part number. This starter is designed for late model GM engines with a 14 inch flywheel and is not intended for permanent magnet starter applications, which use a different Sierra part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5919-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Marine Engine Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlywheel Diameter:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 55 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.63 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282377793\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eLate model GM engines with a 14 inch diameter flywheel\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat flywheel size does the Sierra 18-5919-1 starter fit?\u003c\/strong\u003e The 18-5919-1 is built for a 14 inch diameter flywheel, so confirm your engine uses a 14 inch flywheel before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines is this starter designed for?\u003c\/strong\u003e This starter is designed for late model GM engines paired with a 14 inch flywheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5919-1 12 volt or 24 volt?\u003c\/strong\u003e It is a 12 volt DC starter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage is the 18-5919-1 rated at?\u003c\/strong\u003e The 18-5919-1 is rated at 55 amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a higher amperage version of this starter available?\u003c\/strong\u003e Yes, Sierra offers a 65 amp upgrade version of this starter under a different part number for applications needing more amperage than the 55 amp 18-5919-1 provides.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5919-1 work on a permanent magnet starter application?\u003c\/strong\u003e No. The 18-5919-1 is not intended for permanent magnet models; Sierra makes a separate part number for permanent magnet applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-5919-1 starter?\u003c\/strong\u003e It has a black finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the starter housing made of?\u003c\/strong\u003e The 18-5919-1 is constructed of metal for durability in a marine engine compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5919-1 starter weigh?\u003c\/strong\u003e It weighs 9.63 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat improvements does the 18-5919-1 have over older marine starters?\u003c\/strong\u003e The 18-5919-1 was re-engineered with an improved solenoid-to-commutator brush connection, an upgraded planetary seal, and a reinforced clutch gear spring to reduce water intrusion and improve reliability and service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the 18-5919-1 starter?\u003c\/strong\u003e The Sierra 18-5919-1 is backed by a limited lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-5919-1?\u003c\/strong\u003e The order includes one Sierra 18-5919-1 starter unit.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988346646747,"sku":"SIE-18-5919-1","price":211.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5919-1__06341.1737856946.500.750.jpg?v=1785188094"},{"product_id":"sierra-18-5920-marine-starter-for-ford-5-0l-and-5-8l-engines-clockwise-rotation-12v-replaces-oem-987811-rk122014-ra122001","title":"Sierra 18-5920 Starter Motor, Clockwise Rotation, Replaces 987811\/RK122014\/RA122001, for 5.0 \u0026 5.8 Liter Ford Marine Engines","description":"\u003cp\u003eThe Sierra 18-5920 is a clockwise (standard) rotation starter motor built for 5.0 and 5.8 litre Ford marine engines. It uses the same electrical connections and mounting method as the original Delco unit it replaces, so it bolts in without modification to the wiring harness or mounting bracket. The starter comes equipped with a fan and a drive pulley, and it meets SAE J1171 marine electrical standards, which govern ignition protection for starters used in gasoline-powered boats to reduce the risk of igniting fuel vapors in the engine compartment.\u003c\/p\u003e\u003cp\u003eElectrically, the 18-5920 runs on a 12 volt system and draws 22 amps at 1.4 kW output, making it suited to the cranking demands of small-block Ford marine V-8 applications. It measures 5.5 x 10.25 x 5.5 inches and weighs 8 pounds. This starter directly replaces OEM and aftermarket units carrying the numbers 987811, RK122014, and RA122001, so it is a straightforward swap for boats currently running a starter under any of those part numbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5920\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotation:\u003c\/strong\u003e Clockwise\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 22 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1.4 KW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Type:\u003c\/strong\u003e Single Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Fitment:\u003c\/strong\u003e 5.0 \u0026amp; 5.8 litre Ford engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5.5 x 10.25 x 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282244491\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 987811, RK122014, RA122001\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e5.0 \u0026amp; 5.8 litre Ford engines\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e987811\u003c\/li\u003e\n\u003cli\u003eRK122014\u003c\/li\u003e\n\u003cli\u003eRA122001\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-5920 starter fit?\u003c\/strong\u003e The Sierra 18-5920 is built for 5.0 and 5.8 litre Ford marine engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich OEM part numbers does the 18-5920 replace?\u003c\/strong\u003e It replaces starters carrying the numbers 987811, RK122014, and RA122001.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5920 clockwise or counterclockwise rotation?\u003c\/strong\u003e This starter is clockwise, standard rotation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and amperage does this starter run on?\u003c\/strong\u003e The Sierra 18-5920 operates on a 12 volt system and draws 22 amps, with a rated output of 1.4 kW.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5920 include a drive pulley and fan?\u003c\/strong\u003e Yes, the Sierra 18-5920 comes equipped with a fan and drive pulley installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5920 bolt in without changing my wiring or mounting bracket?\u003c\/strong\u003e It uses the same electrical connections and mounting method as the original equipment starter, so no bracket or harness modification is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-5920 starter weigh?\u003c\/strong\u003e It weighs 8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this starter?\u003c\/strong\u003e The 18-5920 measures 5.5 x 10.25 x 5.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5920 rated for marine ignition protection standards?\u003c\/strong\u003e Yes, it is built to the SAE J1171 standard for ignition-protected marine electrical components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-5920 meet or exceed OEM performance?\u003c\/strong\u003e Sierra states this starter meets or exceeds the performance of the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-5920?\u003c\/strong\u003e You receive one complete Sierra 18-5920 starter motor with fan and drive pulley already installed.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988346679515,"sku":"SIE-18-5920","price":148.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-5920_lg__94543.1558128984.500.750.jpg?v=1785188118"},{"product_id":"marine-starter-for-mercruiser-3-0l-1999-newer-4-inch-flywheel-replaces-oem-50-807904a1-12v-permanent-magnet-gear-reduction-18-6275-1","title":"Sierra 18-6275-1 Starter, Late Model GM 14 Inch Flywheel, Replaces 3857747, 3860566","description":"\u003cp\u003eThe Sierra 18-6275-1 is a permanent magnet gear reduction starter built for late model GM 14 inch flywheel inboard marine engines. It is designed as a direct fit replacement, engineered to meet SAE J1171 marine ignition protection standards so it can be safely used around gasoline engine compartments and fuel vapors. The starter is rated at 1.7 KW and uses a 2 long bolt offset mounting pattern to match the original starter's bolt spacing on the engine block.\u003c\/p\u003e\u003cp\u003eAs a permanent magnet gear reduction design, the 18-6275-1 is lighter and more compact than older style direct drive starters while still delivering strong cranking torque for reliable cold starts. It is built for inboard applications and is intended to replace worn or failed OEM starters carrying part numbers 3857747 or 3860566. Buyers replacing a tired starter on a late model GM inboard with a 14 inch flywheel can install this unit without modifying the existing mounting points, provided the flywheel size and bolt pattern match.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6275-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Starter Motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1.7 KW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e SAE J1171\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlywheel Fitment:\u003c\/strong\u003e 14 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e 2 Long Bolt Offset Pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Inboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarter Type:\u003c\/strong\u003e Permanent Magnet Gear Reduction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 11.7 x 7.7 x 6.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.67 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 3857747, 3860566\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eLate model GM inboard engines with a 14 inch flywheel\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3857747\u003c\/li\u003e\n\u003cli\u003e3860566\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-6275-1 starter fit?\u003c\/strong\u003e The Sierra 18-6275-1 is built for late model GM inboard engines with a 14 inch flywheel, using a 2 long bolt offset mounting pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-6275-1 a direct replacement for OEM part 3857747?\u003c\/strong\u003e Yes, the Sierra 18-6275-1 starter replaces OEM part numbers 3857747 and 3860566.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 18-6275-1 also replace part number 3860566?\u003c\/strong\u003e Yes, both 3857747 and 3860566 are listed as OEM replacements covered by the Sierra 18-6275-1 starter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and wattage is this starter rated for?\u003c\/strong\u003e This starter runs on a 12 volt DC electrical system and is rated at 1.7 KW.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-6275-1 safe for use near gasoline engines?\u003c\/strong\u003e It meets the SAE J1171 marine ignition protection standard, which covers safe operation around gasoline engine compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of starter design does the 18-6275-1 use?\u003c\/strong\u003e It is a permanent magnet gear reduction starter, a lighter and more compact design than older direct drive starters while still providing strong cranking power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-6275-1 starter weigh?\u003c\/strong\u003e The Sierra 18-6275-1 starter weighs 9.67 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the physical dimensions of this starter?\u003c\/strong\u003e The 18-6275-1 measures 11.7 x 7.7 x 6.6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-6275-1 starter housing made of?\u003c\/strong\u003e The housing and core components of the Sierra 18-6275-1 are made of metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bolt pattern does the 18-6275-1 use for mounting?\u003c\/strong\u003e It uses a 2 long bolt offset mounting pattern, matching the original equipment mounting points on late model GM 14 inch flywheel inboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this starter intended for inboard or sterndrive use?\u003c\/strong\u003e The Sierra 18-6275-1 is designed for inboard engine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-6275-1 fit an engine with a different flywheel size?\u003c\/strong\u003e No, the 18-6275-1 is built specifically to match a 14 inch flywheel; a different flywheel size requires a different Sierra starter part number.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988356051163,"sku":"SIE-18-6275-1","price":215.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-6275-1.png?v=1784938580"},{"product_id":"sierra-18-6411-outboard-starter-for-yamaha-25-40-hp-2-stroke-replaces-689-81800-13-00-11-tooth","title":"Sierra 18-6411 Starter for 60 HP Yamaha Outboard Engines, Replaces Yamaha 6H3-81800-11-00","description":"\u003cp\u003eThe Sierra 18-6411 is a marine grade starter motor built for 60 HP Yamaha outboard engines. It meets SAE J1171 and ISO 8846 marine electrical standards, and uses high quality magnets and field coils to deliver strong starting torque even after repeated use in a marine environment. The starter's double sealed housing keeps moisture and salt spray away from internal components, while high quality brushes extend service life compared to standard automotive-grade starters that are not built to withstand the marine environment.\u003c\/p\u003e\u003cp\u003eThis starter is a direct fit for 60 HP Yamaha outboard engines and cross-references to the Yamaha OEM starter, making it a straightforward replacement when an original starter fails or wears out. Every Sierra part is backed by Sierra's Industry Leading Customer Satisfaction Warranty, which covers the product against defects in workmanship and materials for its useful life.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6411\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 60 HP Yamaha Outboard Engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 11 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Type:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards Compliance:\u003c\/strong\u003e SAE J1171 and ISO 8846\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e Double sealed housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrushes:\u003c\/strong\u003e High quality brushes for longer service life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.84 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282137663\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e Yamaha 6H3-81800-11-00, Yamaha 6H3-81800-10, Yamaha 6H3-81800-10-00, Arco 3422\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e60 HP Yamaha Outboard Engines\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYamaha 6H3-81800-11-00\u003c\/li\u003e\n\u003cli\u003eYamaha 6H3-81800-10\u003c\/li\u003e\n\u003cli\u003eYamaha 6H3-81800-10-00\u003c\/li\u003e\n\u003cli\u003eArco 3422\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-6411 starter fit?\u003c\/strong\u003e The Sierra 18-6411 is designed to fit 60 HP Yamaha outboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the Sierra 18-6411 replace?\u003c\/strong\u003e It replaces Yamaha 6H3-81800-11-00, Yamaha 6H3-81800-10, Yamaha 6H3-81800-10-00, and Arco 3422.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-6411 starter weigh?\u003c\/strong\u003e This starter weighs 4.84 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage is the Sierra 18-6411 starter rated for?\u003c\/strong\u003e The Sierra 18-6411 is rated at 11 Amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6411 built to marine standards?\u003c\/strong\u003e Yes, the Sierra 18-6411 meets SAE J1171 and ISO 8846 marine electrical standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-6411 have a warranty?\u003c\/strong\u003e Yes, the Sierra 18-6411 qualifies for Sierra's Industry Leading Customer Satisfaction Warranty, which covers defects in workmanship and materials for the useful life of the product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes the Sierra 18-6411 suitable for marine use compared to an automotive starter?\u003c\/strong\u003e A double sealed housing on the Sierra 18-6411 protects internal components from moisture and salt spray, and high quality magnets, field coils, and brushes are used to provide better starting torque and longer service life in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6411 a genuine Yamaha starter or an aftermarket replacement?\u003c\/strong\u003e The Sierra 18-6411 is an aftermarket starter engineered to meet or exceed the original equipment part it replaces on 60 HP Yamaha outboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the Sierra 18-6411?\u003c\/strong\u003e The Sierra 18-6411 order includes one complete starter motor unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Sierra 18-6411 replace an Arco starter?\u003c\/strong\u003e Yes, the Sierra 18-6411 replaces Arco 3422 in addition to the listed Yamaha OEM numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6411 a single phase or three phase starter?\u003c\/strong\u003e The Sierra 18-6411 is a three phase starter.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988357525723,"sku":"SIE-18-6411","price":248.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-6411__06160.1722493717.500.750.jpg?v=1785188683"},{"product_id":"yamaha-20-25-hp-outboard-starter-replaces-6l2-81800-20-00-sierra-18-6420-mlhu-mshu-mlhv-mshv","title":"Sierra 18-6420 Outboard Starter, Replaces Yamaha 6N7-81800-10-00, Fits 115-250 HP (9 Tooth)","description":"\u003cp\u003eThe Sierra 18-6420 is a marine-grade outboard starter engineered as a direct replacement for Yamaha outboard motors in the 115-250 HP range using a 9 tooth drive configuration. Built to meet SAE J1171 and ISO 8846 marine electrical standards, this starter is designed to withstand the vibration, moisture, and thermal cycling that shorten the life of automotive-grade starters when used in a marine environment.\u003c\/p\u003e\u003cp\u003eInside the housing, high quality magnets and field coils are matched to deliver strong starting torque for cranking larger displacement outboard powerheads, while double sealed housings and durable brushes are used to extend service life in a wet, corrosive environment. The starter directly replaces Yamaha part number 6N7-81800-10-00, so it drops in without modification to the mounting, drive gear, or electrical connections on applicable outboards.\u003c\/p\u003e\u003cp\u003eAs a Sierra part, the 18-6420 is covered under Sierra's Customer Satisfaction Warranty, which warrants the product against defects in workmanship and materials for the useful life of the product. This starter is intended for outboard owners and marine technicians replacing a failed or worn starter motor rather than for new-engine assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6420\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Tooth Count:\u003c\/strong\u003e 9 tooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 115-250 HP outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards Met:\u003c\/strong\u003e SAE J1171, ISO 8846\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.12 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282137755\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e115-250 HP outboards (9 tooth drive)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e6N7-81800-10-00\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-6420 starter fit?\u003c\/strong\u003e The Sierra 18-6420 fits outboards in the 115-250 HP range that use a 9 tooth drive starter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM starter does the 18-6420 replace?\u003c\/strong\u003e It replaces Yamaha starter part number 6N7-81800-10-00, so it installs as a direct swap on applicable 115-250 HP outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many teeth does the drive gear have?\u003c\/strong\u003e The drive gear on the Sierra 18-6420 has 9 teeth, matching the OEM 6N7-81800-10-00 starter it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Yamaha part or an aftermarket replacement?\u003c\/strong\u003e The 18-6420 is a Sierra-brand aftermarket starter, not a genuine Yamaha part, built to replace Yamaha 6N7-81800-10-00 on 115-250 HP outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-6420 starter weigh?\u003c\/strong\u003e This starter weighs 3.12 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat marine standards does this starter meet?\u003c\/strong\u003e Sierra builds the 18-6420 to meet SAE J1171 and ISO 8846 marine electrical standards, which govern ignition protection and safety for marine engine components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes this starter suited for marine use versus an automotive starter?\u003c\/strong\u003e Double sealed housings and marine-grade magnets, field coils, and brushes protect the 18-6420 from the moisture and vibration exposure that automotive starters aren't built to handle in an outboard application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-6420 come with a warranty?\u003c\/strong\u003e Yes, the Sierra 18-6420 is covered under Sierra's Customer Satisfaction Warranty against defects in workmanship and materials for the useful life of the product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-6420 bolt directly onto my outboard without modification?\u003c\/strong\u003e Since it replaces Yamaha 6N7-81800-10-00 directly, the 18-6420 is designed to mount and wire in place without modification on 115-250 HP outboards using that starter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-6420?\u003c\/strong\u003e The order includes one Sierra 18-6420 outboard starter motor; no separate mounting hardware or wiring harness is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-6420 be used on smaller horsepower Yamaha outboards?\u003c\/strong\u003e No, the 18-6420 is built for the 115-250 HP range with a 9 tooth drive and is not the correct starter for smaller Yamaha outboards outside that range.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988357656795,"sku":"SIE-18-6420","price":214.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-6420__76402.1722385307.500.750.jpg?v=1785188500"},{"product_id":"rewind-spring-for-johnson-evinrude-10-12-hp-outboard-motors-replaces-omc-318944-sierra-18-6503","title":"Sierra 18-6503 Rewind Spring, Replaces Johnson\/Evinrude 318944","description":"\u003cp\u003eThe Sierra 18-6503 Rewind Spring is a recoil starter spring built for Johnson and Evinrude outboard motors. It is designed as a direct replacement for the original equipment rewind spring, engineered to meet or exceed the quality of the OEM part it replaces. This spring is a core component of the manual starter (recoil) assembly, storing tension as the starter cord is pulled and then retracting the cord back onto the pulley so the starter is ready for the next pull. A worn, weakened, or broken rewind spring is one of the most common reasons a recoil starter fails to retract the cord properly or loses spring tension over time, and replacing it restores proper starter operation without needing to replace the entire recoil housing assembly.\u003c\/p\u003e\u003cp\u003eThe Sierra 18-6503 is finished in white and is sold as a single spring. It carries the Sierra brand's standard limited warranty and is intended for technicians and boat owners performing recoil starter service or rebuilds on compatible Johnson and Evinrude outboard motors. Because rewind springs are fit-specific to the recoil assembly they are installed in, buyers should confirm the original part number against 318944 before ordering to ensure proper fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6503\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Rewind Spring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.51 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Engine Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1 count\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999320339\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eJohnson\/Evinrude outboard motors using recoil starter assemblies compatible with rewind spring 318944\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e318944\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-6503 Rewind Spring replace?\u003c\/strong\u003e The Sierra 18-6503 Rewind Spring is a direct replacement for OEM part number 318944 used on Johnson and Evinrude outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a rewind spring used for?\u003c\/strong\u003e A rewind spring is the coiled spring inside a manual recoil starter that retracts the starter cord back onto the pulley after each pull, and the 18-6503 performs this function in compatible Johnson\/Evinrude recoil starter assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-6503 rewind spring weigh?\u003c\/strong\u003e The Sierra 18-6503 Rewind Spring weighs 0.51 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-6503 rewind spring?\u003c\/strong\u003e It is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6503 an OEM part or aftermarket?\u003c\/strong\u003e The 18-6503 is a Sierra aftermarket rewind spring engineered to meet or exceed the quality of the original 318944 OEM spring it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many springs come in a package?\u003c\/strong\u003e The 18-6503 is sold as a single rewind spring, one unit count per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this spring fit any Johnson or Evinrude outboard?\u003c\/strong\u003e The 18-6503 is fit-specific and designed for recoil starter assemblies that originally used spring 318944, so the original part number should be confirmed before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engine type is the 18-6503 rewind spring designed for?\u003c\/strong\u003e It is designed for gasoline-powered outboard motor engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-6503 come with a warranty?\u003c\/strong\u003e Yes, the Sierra 18-6503 Rewind Spring is covered by Sierra's limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-6503 rewind spring?\u003c\/strong\u003e The UPC for the Sierra 18-6503 Rewind Spring is 030999320339.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988357722331,"sku":"SIE-18-6503","price":33.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-6503_lg__98199.1558129151.500.750.jpg?v=1785188344"},{"product_id":"starter-pawl-for-evinrude-johnson-outboards-replaces-oem-203698-pack-of-3","title":"Sierra 18-6512-9 Starter Pawl - Replaces 203698 - Pack of 3","description":"\u003cp\u003eThe Sierra 18-6512-9 Starter Pawl is a replacement component for outboard motor starter mechanisms, sold as a pack of three. The starter pawl is a small engaging part within the starter assembly that allows the starter to properly turn the engine over during cranking. Sierra manufactures this pawl to meet or exceed the quality of the original equipment part it replaces, making it a reliable choice when rebuilding or servicing a starter unit. Because starter pawls are wear items subject to repeated mechanical engagement, keeping spares on hand is common practice for anyone maintaining outboard starters, and the pack-of-three quantity supports a full pawl replacement in one purchase. This part directly replaces OEM number 203698, so it can be ordered using either the Sierra part number or the original OEM reference. The pawl is lightweight at 0.02 pounds, consistent with its role as a small internal starter component rather than a full assembly. Installation involves disassembling the starter to access the pawl mechanism, which is typically a task suited to anyone comfortable with basic outboard starter service or a qualified marine mechanic.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6512-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Starter Pawl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Pack of 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 203698\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.02 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282166564\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal outboard starter replacement part; specific engine fitment is not listed for this part number.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e203698\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-6512-9 starter pawl replace?\u003c\/strong\u003e It is a direct replacement for OEM starter pawl number 203698, so it can be ordered using either the Sierra part number 18-6512-9 or the original 203698 reference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pawls come in one pack?\u003c\/strong\u003e The 18-6512-9 is sold as a pack of three starter pawls, which is enough for a complete pawl replacement in one purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-6512-9 starter pawl weigh?\u003c\/strong\u003e Each package of the Sierra 18-6512-9 starter pawl weighs 0.02 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part or an aftermarket copy?\u003c\/strong\u003e The 18-6512-9 is manufactured by Sierra and is built to meet or exceed the quality of the original equipment starter pawl it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a starter pawl used for?\u003c\/strong\u003e A starter pawl is a small engaging component inside the starter assembly that allows the starter motor to turn the engine over during cranking; the 18-6512-9 is Sierra's replacement version of this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the OEM number 203698 to find this part?\u003c\/strong\u003e Yes, OEM number 203698 cross-references directly to the Sierra 18-6512-9 starter pawl.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-6512-9 starter pawl made of?\u003c\/strong\u003e Material composition is not specified for the Sierra 18-6512-9 starter pawl.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-6512-9 fit any outboard motor?\u003c\/strong\u003e Specific engine make, model, and year fitment are not listed for the Sierra 18-6512-9 starter pawl; it should be matched to a starter that uses OEM part 203698.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the starter pawl installed?\u003c\/strong\u003e Installing the 18-6512-9 requires disassembling the starter to access the pawl mechanism, a task suited to someone familiar with outboard starter service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy the pawl in a pack of three instead of individually?\u003c\/strong\u003e The Sierra 18-6512-9 is sold as a pack of three because starter pawls are wear items, and having spares on hand supports a complete replacement without needing to reorder mid-job.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988357820635,"sku":"SIE-18-6512-9","price":9.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-6512-9__73619.1729837015.500.750.jpg?v=1785188943"},{"product_id":"sierra-18-6522-rewind-spring-for-johnson-evinrude-outboard-recoil-starter-replaces-omc-323653-338534-1974-1992","title":"Sierra Rewind Spring 18-6522, Replaces 323653 338534, for Johnson\/Evinrude Outboard Motors","description":"\u003cp\u003eThe Sierra 18-6522 Rewind Spring is a recoil starter spring engineered for Johnson and Evinrude outboard motors. This coiled alloy steel spring stores tension inside the recoil starter housing and returns the starter rope to its retracted position after each pull, a component that wears out or loses tension over time and requires replacement to keep a manual or backup recoil start working reliably. The spring is built to meet or exceed the specifications of the original equipment part it replaces, giving it consistent recoil action and a service life comparable to OEM.\u003c\/p\u003e\u003cp\u003eConstructed from alloy steel with a white finish, the 18-6522 is sized to fit directly into the recoil housing designed for the outboard motors that used Evinrude\/Johnson part numbers 323653 and 338534. Because rewind springs are fit specific to a particular recoil starter assembly, buyers should confirm their existing spring's part number or their motor's original equipment number against the cross-references listed below before ordering. The spring ships as a single unit and is intended as a direct replacement during recoil starter service or rebuild.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6522\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rewind Spring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Engine Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.48 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Johnson\/Evinrude outboard motors that originally used rewind spring part numbers 323653 or 338534.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e323653\u003c\/li\u003e\n\u003cli\u003e338534\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-6522 rewind spring fit?\u003c\/strong\u003e The Sierra 18-6522 is designed for Johnson\/Evinrude outboard motors that originally used rewind spring part numbers 323653 or 338534.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-6522 replace?\u003c\/strong\u003e It replaces Evinrude\/Johnson part numbers 323653 and 338534, so either number can be used to confirm this is the correct spring for your outboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6522 a genuine Johnson or Evinrude part?\u003c\/strong\u003e No, the 18-6522 is a Sierra-manufactured aftermarket rewind spring built to meet or exceed the original equipment part it replaces, rather than a Johnson or Evinrude branded part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the rewind spring made from?\u003c\/strong\u003e The 18-6522 rewind spring is made from alloy steel with a white finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-6522 rewind spring weigh?\u003c\/strong\u003e The Sierra 18-6522 rewind spring weighs 0.48 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many springs come in the package?\u003c\/strong\u003e The Sierra 18-6522 is sold as a single rewind spring, a unit count of one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if this is the right spring for my recoil starter?\u003c\/strong\u003e Rewind springs are fit specific, so check the part number on your existing spring or your outboard's original equipment number against 323653 or 338534 before ordering the 18-6522.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-6522 spring fit both Johnson and Evinrude outboards?\u003c\/strong\u003e Yes, since Johnson and Evinrude outboards shared the same recoil starter components in this application, the 18-6522 fits motors from either brand that used spring 323653 or 338534.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Sierra 18-6522 and 18-6511 rewind springs?\u003c\/strong\u003e The 18-6522 replaces Evinrude\/Johnson 323653 and 338534, while the similar Sierra 18-6511 rewind spring replaces a different OEM number, 312932, so the two are not interchangeable and fit different recoil starter assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should a recoil starter rewind spring be replaced?\u003c\/strong\u003e A rewind spring like the 18-6522 typically needs replacement when it loses tension, breaks, or no longer retracts the starter rope fully during recoil starter service or rebuild.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988357853403,"sku":"SIE-18-6522","price":15.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-6522_lg__63702.1558129636.500.750.jpg?v=1785187980"},{"product_id":"sierra-18-6511-rewind-spring-for-johnson-evinrude-outboard-replaces-omc-312932","title":"Sierra Rewind Spring 18-6511, Replaces 318940, for 9.9 - 15HP Outboard Motors (1974-1992)","description":"\u003cp\u003eThe Sierra 18-6511 Rewind Spring is a recoil starter spring engineered as a direct replacement for outboard motors in the 9.9 - 15HP range built in 1974-1992. This spring is the coiled component inside the manual starter assembly that retracts the starter rope after each pull, resetting the mechanism so the motor is ready for the next start attempt. When a rewind spring weakens, breaks, or loses tension, the starter rope will fail to retract properly or the pull cord will feel loose and unresponsive, making the outboard difficult or impossible to start by hand.\u003c\/p\u003e\u003cp\u003eSierra manufactures this spring to meet or exceed original equipment specifications, so it installs and functions the same as the factory part it replaces. It directly replaces OEM part number 318940, making it straightforward to identify and order the correct spring for a 9.9 - 15HP outboard from the 1974-1992 production years. The part weighs 0.29 pounds as packaged.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6511\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Rewind Spring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.29 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999320346\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower Range:\u003c\/strong\u003e 9.9 - 15HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Years:\u003c\/strong\u003e 1974-1992\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e 318940\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e9.9 - 15HP outboard motors, 1974-1992\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e318940\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-6511 rewind spring fit?\u003c\/strong\u003e The Sierra 18-6511 is designed for outboard motors in the 9.9 - 15HP range built in the 1974-1992 model years.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-6511 replace OEM part 318940?\u003c\/strong\u003e Yes, part number 18-6511 is a direct replacement for OEM part 318940.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a rewind spring actually do?\u003c\/strong\u003e It is the coiled spring inside the manual starter assembly that retracts the starter rope after each pull, resetting the recoil starter for the next start attempt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my rewind spring needs replacing?\u003c\/strong\u003e If the starter rope on your 9.9-15HP outboard fails to retract fully, feels loose, or the recoil mechanism will not reset, a worn or broken rewind spring such as the 18-6511 is a likely cause.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6511 a genuine Sierra part or aftermarket?\u003c\/strong\u003e It is manufactured by Sierra and built to meet or exceed original equipment quality standards for a 9.9-15HP outboard rewind spring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-6511 rewind spring weigh?\u003c\/strong\u003e This rewind spring weighs 0.29 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-6511 spring assembly?\u003c\/strong\u003e The Sierra 18-6511 rewind spring is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the 18-6511 myself or do I need a mechanic?\u003c\/strong\u003e Replacing a recoil starter rewind spring like the 18-6511 involves disassembling the manual starter housing, which requires care due to spring tension, so many owners with basic mechanical experience can do it, though those unfamiliar with recoil starters may prefer a marine mechanic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-6511?\u003c\/strong\u003e The UPC for the Sierra 18-6511 rewind spring is 030999320346.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-6511 work on outboards outside the 9.9-15HP range?\u003c\/strong\u003e The 18-6511 is specified for the 9.9 - 15HP range from 1974-1992; horsepower ratings outside this range are not covered by this part.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988357918939,"sku":"SIE-18-6511","price":22.53,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-6511_lg__53929.1558129359.500.750.jpg?v=1785187997"},{"product_id":"sierra-18-6426-outboard-starter-for-yamaha-f75-f80-f90-f100-4-stroke-replaces-oem-67f-81800-02-00","title":"Sierra Outboard Starter 18-6426 for Yamaha Outboard Engines","description":"\u003cp\u003eThe Sierra 18-6426 is an outboard starter built to crank Yamaha outboard engines reliably season after season. As a direct replacement starter, it restores dependable engine startup for boaters whose original starter has worn out, weakened, or failed from years of marine service. Marine starters work in a demanding environment of vibration, moisture, and temperature swings, and this unit is manufactured to stand up to that duty cycle while delivering the torque needed to turn over a Yamaha outboard powerhead.\u003c\/p\u003e\u003cp\u003eInstallation follows standard outboard starter replacement procedure: disconnect the battery, remove the old starter, and mount the Sierra 18-6426 in its place using the existing mounting hardware and wiring connections. Because it is designed specifically for Yamaha outboard applications, boat owners and marine technicians can swap it in without modifying the starter circuit or mounting points. Keeping a proven, correctly sized starter on hand helps avoid downtime at the dock or ramp when an original-equipment unit reaches the end of its service life.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6426\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Yamaha outboard engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.87 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282137816\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-6426 starter fit?\u003c\/strong\u003e The Sierra 18-6426 is built for Yamaha outboard engines as a direct-fit replacement starter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-6426 outboard starter weigh?\u003c\/strong\u003e This starter weighs 7.87 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6426 a new starter or a rebuilt unit?\u003c\/strong\u003e The 18-6426 is sold as a new outboard starter under the Sierra brand, not a core-exchange rebuild.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the Sierra 18-6426 myself?\u003c\/strong\u003e Yes, replacing an outboard starter with the Sierra 18-6426 follows standard procedure: disconnect the battery, unbolt the old starter, and mount the new one using the existing hardware and wiring connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-6426 include mounting hardware?\u003c\/strong\u003e The Sierra 18-6426 is the starter motor itself; it is installed using the existing mounting bolts and electrical connections from the outboard being serviced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-6426 starter?\u003c\/strong\u003e The UPC for the Sierra 18-6426 Yamaha outboard starter is 808282137816.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace my outboard starter?\u003c\/strong\u003e Outboard starters like the Sierra 18-6426 typically need replacement when the original unit wears out, weakens, or fails to reliably crank the engine after years of marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6426 designed for saltwater use?\u003c\/strong\u003e The Sierra 18-6426 is built as a marine-duty outboard starter intended for the vibration, moisture, and temperature demands of outboard engine service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is the 18-6426 starter?\u003c\/strong\u003e The 18-6426 outboard starter is manufactured by Sierra.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Sierra 18-6426 work as a drop-in replacement without rewiring?\u003c\/strong\u003e Because the Sierra 18-6426 is designed specifically for Yamaha outboard applications, it mounts and wires in using the existing starter circuit and mounting points.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988358803675,"sku":"SIE-18-6426","price":342.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-6426__31587.1722365473.500.750.jpg?v=1785329175"},{"product_id":"outboard-starter-for-yamaha-55-60hp-2-cylinder-outboards-replaces-6e5-81800-11-00-9-tooth-drive-sierra-18-6413","title":"Sierra 18-6413 Outboard Starter for Yamaha Outboards, Replaces 6E5-81800-12-00, 9-Tooth Drive Gear","description":"\u003cp\u003eThe Sierra 18-6413 is an outboard starter built as a direct replacement for Yamaha outboard motors. It features a 9-tooth drive gear and a 100 amp rating, and is constructed from metal for durable, reliable cranking performance. Each Sierra part is manufactured to meet or exceed the specifications of the original equipment part it replaces, giving boat owners a dependable option for restoring starting power without sourcing a used OEM unit.\u003c\/p\u003e\u003cp\u003eThis starter is intended as a one-for-one replacement for the Yamaha OEM starter it corresponds to, making installation straightforward for anyone replacing a worn or failed outboard starter. It ships as a single unit, ready to install in place of the original starter.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6413\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 100 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Gear:\u003c\/strong\u003e 9-Tooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.48 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282137687\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eYamaha outboard motors\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e6E5-81800-12-00\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-6413 starter used for?\u003c\/strong\u003e The Sierra 18-6413 is an outboard starter designed as a replacement for Yamaha outboard motors, restoring the cranking function needed to start the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part does the 18-6413 replace?\u003c\/strong\u003e It replaces the Yamaha OEM starter numbered 6E5-81800-12-00, so it can be installed in place of that original part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many teeth does the drive gear have?\u003c\/strong\u003e The Sierra 18-6413 starter has a 9-tooth drive gear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage is the 18-6413 starter rated for?\u003c\/strong\u003e This starter is rated at 100 amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-6413 starter made from?\u003c\/strong\u003e It is constructed from metal for durable operation in the outboard motor environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-6413 starter weigh?\u003c\/strong\u003e The 18-6413 starter weighs 6.48 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many starters come in the package?\u003c\/strong\u003e The Sierra 18-6413 ships as a single outboard starter unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6413 a genuine Yamaha part or aftermarket?\u003c\/strong\u003e The 18-6413 is a Sierra-branded aftermarket starter manufactured to meet or exceed the performance of the original Yamaha equipment it replaces, specifically OEM number 6E5-81800-12-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-6413 fit any outboard motor?\u003c\/strong\u003e The 18-6413 is designed for Yamaha outboard motors that originally used the 6E5-81800-12-00 starter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-6413 starter?\u003c\/strong\u003e The UPC for the Sierra 18-6413 outboard starter is 808282137687.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988359524571,"sku":"SIE-18-6413","price":191.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-6413__83120.1722374941.500.750.jpg?v=1785187992"},{"product_id":"sierra-18-6826-marine-starter-for-johnson-evinrude-40-90hp-e-tec-outboards-replaces-oem-586768","title":"Sierra 18-6826 Starter, Replaces Evinrude\/Johnson 586768 and 587045, Fits 40-90 E-Tec Engines","description":"\u003cp\u003eThe Sierra 18-6826 Starter is a replacement starter motor engineered for Evinrude\/Johnson 40-90 E-Tec engines. It is built to meet or exceed the original equipment part it replaces, giving boat owners a dependable way to restore reliable engine cranking without sourcing a used or discontinued OEM starter. The starter operates on a 12 volt DC system and is constructed of metal for durability in the marine environment.\u003c\/p\u003e\u003cp\u003eThis starter directly replaces Evinrude\/Johnson part numbers 586768 and 587045, making it a straightforward swap for outboards originally equipped with either of those OEM starters. Sierra manufactures each unit to consistent quality standards so fit, output, and mounting match the factory starter it is replacing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6826\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Evinrude Outboard Starters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1.1 KW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282311520\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eEvinrude\/Johnson 40-90 E-Tec engines\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e586768\u003c\/li\u003e\n\u003cli\u003e587045\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 18-6826 starter fit?\u003c\/strong\u003e The Sierra 18-6826 starter fits Evinrude\/Johnson 40-90 E-Tec engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does this starter replace?\u003c\/strong\u003e This starter replaces Evinrude\/Johnson part numbers 586768 and 587045.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6826 a direct OEM replacement?\u003c\/strong\u003e Yes, the 18-6826 is built to meet or exceed the original equipment starter it replaces, so it installs as a direct swap for 586768 or 587045.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the 18-6826 starter?\u003c\/strong\u003e It is a 12 volt DC starter, matching standard outboard electrical systems on 40-90 E-Tec engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-6826 starter weigh?\u003c\/strong\u003e The 18-6826 starter weighs 6.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the starter housing made of?\u003c\/strong\u003e The Sierra 18-6826 starter is constructed of metal for durability in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this starter work if my Evinrude\/Johnson originally had part number 587045?\u003c\/strong\u003e Yes, Sierra part 18-6826 is a listed replacement for OEM number 587045.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this starter work if my Evinrude\/Johnson originally had part number 586768?\u003c\/strong\u003e Yes, Sierra part 18-6826 is a listed replacement for OEM number 586768.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6826 genuine Sierra or aftermarket?\u003c\/strong\u003e It is a genuine Sierra manufactured part, designed to meet or exceed the quality of the original equipment starter it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the wattage rating of the 18-6826 starter?\u003c\/strong\u003e The 18-6826 starter is rated at 1.1 KW.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-6826?\u003c\/strong\u003e The order includes one Sierra 18-6826 starter motor.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988359655643,"sku":"SIE-18-6826","price":164.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-6826__67586.1692196667.500.750.jpg?v=1785188219"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/EMP-50-35863-MerCruiser-Volvo_OMC-Boat-Starter__85942.1722498161.500.750.jpg?v=1785356980","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-engine-parts-systems-ignition-starting-starters-solenoids-starters-starter-motors.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}