{"title":"Livewells \u0026 Baitwells","description":null,"products":[{"product_id":"sea-dog-520075-1-snap-handle-drain-plug-stainless-steel-and-nitrile-rubber-fits-1-inch-drain-holes","title":"Sea-Dog Snap Handle Drain Plug, Stainless Steel, 1 Inch Diameter","description":"\u003cp\u003eThe Sea-Dog Snap Handle Drain Plug is a cam-action boat drain plug built for a quick, leak-proof seal without threading or wrenching. To install, simply turn the handle clockwise to tighten the plug into the drain hole, then fold the handle down and snap it into the locked position to set the seal. The cam mechanism lets you fine-tune sealing pressure by twisting the handle before locking it down, so you get a tight fit every time without over-torquing.\u003c\/p\u003e\u003cp\u003eConstruction is stamped stainless steel paired with a nitrile rubber seal, giving the plug corrosion resistance for saltwater and freshwater use along with a durable, flexible gasket that seals reliably against the transom drain opening. The compact folding handle design keeps the plug low-profile when locked down, reducing snag points on the hull. This part number, 520075-1, measures 1 inch at the A dimension and 1-1\/4 inches at the B dimension and does not include a tether chain.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520075-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped Stainless Steel\/Nitrile Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.11 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520218\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow does the Sea-Dog Snap Handle Drain Plug seal the drain hole?\u003c\/strong\u003e It uses a cam action: turning the handle clockwise tightens the plug into the hole, then folding the handle down and snapping it into place locks in a leak-proof seal, no threading required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is part number 520075-1 made of?\u003c\/strong\u003e This drain plug is constructed of stamped stainless steel with a nitrile rubber seal, giving it corrosion resistance along with a flexible, durable gasket surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 520075-1 drain plug?\u003c\/strong\u003e It measures 1 inch at the A dimension and 1-1\/4 inches at the B dimension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this drain plug come with a tether chain?\u003c\/strong\u003e No, part number 520075-1 does not include a chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog Snap Handle Drain Plug weigh?\u003c\/strong\u003e It weighs 0.11 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I adjust how tight the seal is on this plug?\u003c\/strong\u003e Yes, twisting the handle adjusts the pressure of the plug before you fold the handle down to lock and seal it in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 520075-1 suitable for saltwater use?\u003c\/strong\u003e The stamped stainless steel and nitrile rubber construction is corrosion resistant, making this drain plug suitable for saltwater and freshwater boating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog Snap Handle Drain Plug?\u003c\/strong\u003e This drain plug, part number 520075-1, has a gray finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many drain plugs come in an order?\u003c\/strong\u003e One Sea-Dog Snap Handle Drain Plug (part number 520075-1) is included per unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from a standard threaded drain plug?\u003c\/strong\u003e Instead of screwing a plug in and out with threads, the Sea-Dog 520075-1 uses a cam-action handle that tightens with a turn and locks down with a snap, making install and removal faster.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825682139,"sku":"S-D-520075-1","price":6.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5258.jpg?v=1784429720"},{"product_id":"sea-dog-t-handle-drain-plug-1-inch-stamped-brass-with-nitrile-rubber-seal-leak-proof-cam-lock-boat-baitwell-plug","title":"Sea-Dog T-Handle Drain Plug, 1 Inch Brass, 520080-1","description":"\u003cp\u003eThe Sea-Dog T-Handle Drain Plug (520080-1) is a 1 inch brass drain plug built to seal boat hull drain fittings against water intrusion when the boat is in the water. Turning the T-handle clockwise draws the plug tight and locks it in place; turning it counterclockwise releases it for quick removal when draining the hull, bilge, or livewell, with no tools required.\u003c\/p\u003e\u003cp\u003eThe plug body is constructed of stamped brass for corrosion and vibration resistance, paired with a nitrile rubber seal that forms a leak-proof gasket against the drain opening. The plug has a 1 inch diameter (A) and a 1-1\/4 inch overall diameter (B). It is sold individually and weighs 0.10 pounds.\u003c\/p\u003e\u003cp\u003eSea-Dog also offers this same T-Handle Drain Plug design in a 1-1\/4 inch by 1-1\/4 inch brass size (520082-1) and in stamped stainless steel (520085-1, 520086-1), so boaters can match the plug material and size to their existing hull fitting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520080-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e T-Handle Drain Plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped brass with nitrile rubber seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug Diameter (A):\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Diameter (B):\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.10 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Gold-tone brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Quarter-turn T-handle, clockwise to lock, counterclockwise to release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Sold individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520041\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 520080-1 drain plug?\u003c\/strong\u003e The 520080-1 has a 1 inch plug diameter (A) with a 1-1\/4 inch overall diameter (B).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-Handle Drain Plug made of?\u003c\/strong\u003e Sea-Dog's 520080-1 T-Handle Drain Plug is stamped brass paired with a nitrile rubber seal for a leak-proof fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the T-handle lock in place?\u003c\/strong\u003e Turn the T-handle clockwise to lock the 520080-1 plug in place, and counterclockwise to release it for removal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 520080-1 drain plug sold individually or in a pack?\u003c\/strong\u003e It is sold individually, one plug per unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sea-Dog make this drain plug in stainless steel?\u003c\/strong\u003e Yes, the same T-Handle Drain Plug design is also available in stamped stainless steel as part numbers 520085-1 and 520086-1, which are separate SKUs from the brass 520080-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 520080-1 drain plug weigh?\u003c\/strong\u003e The Sea-Dog 520080-1 T-Handle Drain Plug weighs 0.10 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC does the Sea-Dog 520080-1 drain plug use?\u003c\/strong\u003e The UPC for this product is 035514520041.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 520080-1 T-Handle Drain Plug?\u003c\/strong\u003e It has a gold-tone brass finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between part 520080 and 520080-1?\u003c\/strong\u003e Both are the same 1 inch brass T-Handle Drain Plug; 520080 is the bulk-packed version and 520080-1 is the same plug in display packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the T-Handle Drain Plug prevent leaks?\u003c\/strong\u003e Yes, the nitrile rubber seal on the 520080-1 forms a leak-proof seal when the T-handle is turned clockwise to lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a size option larger than 1 inch?\u003c\/strong\u003e Yes, Sea-Dog offers a 1-1\/4 inch by 1-1\/4 inch brass version of this T-Handle Drain Plug under part number 520082-1, a separate SKU from the 1 inch 520080-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 520080-1 drain plug carry a Proposition 65 warning?\u003c\/strong\u003e Yes, this brass T-Handle Drain Plug carries a California Proposition 65 warning for cancer and reproductive harm.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825845979,"sku":"S-D-520080-1","price":5.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8156.jpg?v=1784429727"},{"product_id":"sea-dog-520085-1-t-handle-drain-plug-1-inch-stainless-steel-with-nitrile-rubber-seal","title":"Sea-Dog T-Handle Drain Plug 520085-1, 1 Inch, Stainless Steel and Nitrile Rubber","description":"\u003cp\u003eThe Sea-Dog T-Handle Drain Plug (520085-1) is a 1 inch stamped stainless steel drain plug designed to provide a leak proof seal in boat hull drain openings. The T-handle design makes installation and removal fast and tool-free: simply turn the handle clockwise to lock the plug in place and form the seal, then turn it counter-clockwise to release it for draining. The plug body is constructed of corrosion and vibration resistant stamped stainless steel paired with a nitrile rubber seal, giving it the durability to withstand repeated exposure to fresh and salt water environments as well as the vibration common to boat hulls underway.\u003c\/p\u003e\u003cp\u003eThis drain plug is sized at 1 inch (A dimension) with a 1-1\/4 inch B dimension, and is sold individually. It is a straightforward replacement or upgrade drain plug for boats that use a 1 inch stamped stainless T-handle style plug, and pairs with Sea-Dog's broader stamped stainless drain plug and baitwell plug lineup for boats needing multiple sizes on board.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520085-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e T-Handle Drain Plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug Diameter (A):\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Diameter (B):\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel, nitrile rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.10 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520188\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 plug per pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal 1 inch drain hole application; not specific to a single boat make, model, or engine.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 520085-1 T-Handle Drain Plug?\u003c\/strong\u003e The 520085-1 is a 1 inch T-handle drain plug, with a 1-1\/4 inch overall (B) dimension on the housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you install and remove this drain plug?\u003c\/strong\u003e Turn the T-handle clockwise to lock the 520085-1 plug in place and form the seal, and turn it counter-clockwise to release it for draining.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-Handle Drain Plug made of?\u003c\/strong\u003e It is made of stamped stainless steel with a nitrile rubber seal, chosen for corrosion and vibration resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 520085-1 provide a watertight seal?\u003c\/strong\u003e Yes, the Sea-Dog T-Handle Drain Plug is designed to provide a leak proof seal when the T-handle is turned to the locked position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 520085-1 drain plug weigh?\u003c\/strong\u003e This Sea-Dog T-handle drain plug weighs 0.10 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this drain plug sold as a single unit or in a pack?\u003c\/strong\u003e The 520085-1 is sold as one plug per pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog 520085-1 drain plug?\u003c\/strong\u003e The plug's nitrile rubber seal is black, with a stainless steel T-handle body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 520085-1 resistant to vibration on a boat underway?\u003c\/strong\u003e Yes, the stamped stainless steel and nitrile rubber construction of the 520085-1 is specifically built for corrosion and vibration resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a larger size available in this same drain plug style?\u003c\/strong\u003e Sea-Dog offers a 1-1\/4 inch version of this same stamped stainless T-handle drain plug under a separate part number, for boats with a larger drain opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 520085-1 T-Handle Drain Plug?\u003c\/strong\u003e The UPC for the Sea-Dog 520085-1 T-Handle Drain Plug is 035514520188.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825878747,"sku":"S-D-520085-1","price":5.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8157.jpg?v=1784429727"},{"product_id":"sea-dog-520091-1-brass-baitwell-plug-3-8-cam-action-snap-lock-livewell-drain-plug","title":"Sea-Dog Brass Baitwell Plug, 3\/8 Inch, Cam-Action Livewell Drain Plug (520091-1)","description":"\u003cp\u003eThe Sea-Dog Baitwell Plug (520091-1) is a cam-action drain plug built to seal livewells and baitwells against leaks. Rather than relying on a plain friction fit, the plug uses a snap lock handle: turn the handle clockwise to tighten the plug against the drain opening, then snap the handle down flat to lock it in place for a leak-proof seal. The snap lock handle is adjustable, so the plug can be tightened to fit most baitwells and livewells currently in use rather than requiring an exact single bore size.\u003c\/p\u003e\u003cp\u003eConstruction is durable stamped brass combined with a nitrile rubber seal, a pairing chosen for corrosion resistance in wet marine environments and a reliable, long-lasting seal against the drain fitting. This particular plug measures 3\/8 inch (the A dimension) with an 11\/16 inch base (the B dimension), and weighs 0.084 pounds. It is part of a Sea-Dog baitwell plug lineup offered in multiple plug sizes, each sold under its own part number, so boaters can match the plug to the specific drain opening they are sealing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520091-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug Diameter (A):\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Diameter (B):\u003c\/strong\u003e 11\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.084 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped brass and nitrile rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5 x 3 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Cam-action, adjustable snap lock handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520126\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal-fit baitwell\/livewell drain plug; the adjustable snap lock handle allows it to fit most baitwells and livewells currently available rather than one specific boat model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 520091-1 baitwell plug?\u003c\/strong\u003e The Sea-Dog 520091-1 baitwell plug has a 3\/8 inch plug diameter (the A dimension) and an 11\/16 inch base diameter (the B dimension).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cam-action baitwell plug work?\u003c\/strong\u003e Turn the handle on the 520091-1 plug clockwise to tighten it against the drain opening, then snap the handle down flat to lock it in place for a leak-proof seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog baitwell plug made of?\u003c\/strong\u003e It is constructed of durable stamped brass with a nitrile rubber seal, a combination chosen for corrosion resistance in wet marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this baitwell plug weigh?\u003c\/strong\u003e The Sea-Dog 520091-1 baitwell plug weighs 0.084 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this plug fit my livewell or baitwell?\u003c\/strong\u003e Yes, in most cases. The 520091-1 plug's snap lock handle is adjustable, letting it fit most baitwells and livewells currently available rather than a single specific model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this plug sold as a single piece or a pair?\u003c\/strong\u003e The 520091-1 is the individual plug part number; Sea-Dog also packages this baitwell plug line in bulk and paired quantities for retail and marine supply stock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I replace an old or leaking baitwell plug?\u003c\/strong\u003e Remove the worn plug from the drain opening, insert the Sea-Dog 520091-1 in its place, turn the handle clockwise to tighten the seal, and snap the handle down to lock it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sea-Dog make this baitwell plug in other sizes?\u003c\/strong\u003e Yes, the 3\/8 inch 520091-1 is part of a sized lineup that also includes 1\/2 inch, 5\/8 inch, 3\/4 inch, and 7\/8 inch versions, each sold under its own separate part number so you can match the plug to your drain opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog baitwell plug corrosion resistant?\u003c\/strong\u003e Yes, the stamped brass and nitrile rubber construction of the 520091-1 is built to resist corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Sea-Dog 520091-1 baitwell plug carries UPC 035514520126.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog part?\u003c\/strong\u003e Yes, part number 520091-1 is a genuine Sea-Dog baitwell plug, not a generic replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of this plug?\u003c\/strong\u003e The 520091-1 baitwell plug ships in packaging measuring 5 x 3 x 1 inches.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825911515,"sku":"S-D-520091-1","price":5.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8152.jpg?v=1784429731"},{"product_id":"sea-dog-520092-1-brass-baitwell-plug-1-2-inch-cam-action-livewell-drain-plug-pair","title":"Sea-Dog Brass Baitwell Plug 1\/2 Inch, Cam-Action Drain Plug for Livewells and Baitwells, Pack of 2","description":"\u003cp\u003eThe Sea-Dog Baitwell Plug is a stamped brass and nitrile rubber drain plug designed to seal livewell and baitwell drain holes on boats. It uses a cam-action, snap-lock handle for quick, leak-proof installation: turn the handle clockwise to tighten the plug against the drain opening, then snap the handle down flat to lock it in place. The snap-lock handle is adjustable, allowing the plug to tighten and seal properly across most baitwells currently available, so a single plug design can accommodate slight variations in drain hole fit.\u003c\/p\u003e\u003cp\u003eThis version, part number 520092-1, is the 1\/2 inch diameter size and is sold as a pack of 2 plugs. The plug body measures 1\/2 inch (dimension A) with an overall handle\/flange dimension of 11\/16 inch (dimension B). Construction is durable stamped brass paired with a nitrile rubber seal for corrosion resistance and a reliable watertight seal in wet livewell and baitwell environments. Sea-Dog also offers this same plug in 3\/8 inch, 5\/8 inch, 3\/4 inch, and 7\/8 inch diameters under related part numbers for other drain hole sizes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520092-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug Diameter (A):\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange\/Handle Dimension (B):\u003c\/strong\u003e 11\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped brass and nitrile rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 2 (pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Cam-action snap-lock handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520133\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits most baitwells and livewells with a 1\/2 inch drain hole; the adjustable snap-lock handle accommodates slight variation across baitwell drain fittings.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size drain hole does the Sea-Dog 520092-1 baitwell plug fit?\u003c\/strong\u003e The Sea-Dog 520092-1 plug has a 1\/2 inch diameter (dimension A) with an 11\/16 inch handle\/flange dimension (dimension B), sized for a 1\/2 inch livewell or baitwell drain hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many plugs come in this package?\u003c\/strong\u003e Part number 520092-1 is sold as a pack of 2 brass baitwell plugs, unlike the bulk single-unit version of the same 1\/2 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the plug made of?\u003c\/strong\u003e This baitwell plug is constructed of durable stamped brass with a nitrile rubber seal, providing corrosion resistance and a watertight fit in livewells and baitwells.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cam-action locking mechanism work?\u003c\/strong\u003e To install the Sea-Dog 520092-1, turn the handle clockwise to tighten the plug into the drain opening, then snap the handle down flat to lock it in place and secure the seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the handle adjustable for different baitwell fittings?\u003c\/strong\u003e Yes, the snap-lock handle on this Sea-Dog baitwell plug is adjustable to tighten the plug size to fit most baitwells currently available.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this baitwell plug weigh?\u003c\/strong\u003e The Sea-Dog 520092-1 pack weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this leak once installed?\u003c\/strong\u003e No, the nitrile rubber seal combined with the cam-action snap-lock handle is designed to create a leak-proof seal for livewells and baitwells once properly tightened.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the same as the standard 520092 part number?\u003c\/strong\u003e Part number 520092 is the base 1\/2 inch plug, while 520092-1 is the same 1\/2 inch plug packaged as a pair (2 plugs) rather than sold individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other sizes are available if 1\/2 inch does not fit my drain hole?\u003c\/strong\u003e The same Sea-Dog baitwell plug design is also available in 3\/8 inch, 5\/8 inch, 3\/4 inch, and 7\/8 inch diameters, each under its own part number, so measure your drain hole before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this plug be used in saltwater applications?\u003c\/strong\u003e Yes, the stamped brass and nitrile rubber construction of the 520092-1 baitwell plug is intended for marine livewell and baitwell use.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825944283,"sku":"S-D-520092-1","price":5.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8152_da4994e1-55d8-43be-8bb6-17deaa48fd90.jpg?v=1784429738"},{"product_id":"sea-dog-snap-handle-drain-plug-1-in-stamped-brass-cam-action-boat-drain-plug-no-chain-mpn-520070-1","title":"Sea-Dog Snap Handle Drain Plug 1 Inch Brass, No Retention Chain, 520070-1","description":"\u003cp\u003eThe Sea-Dog Snap Handle Drain Plug (520070-1) is a cam-action brass drain plug designed for a fast, leak-proof seal in boat transom and hull drain holes. Rather than threading the plug in and out, the snap handle design lets you simply turn the handle clockwise to tighten the plug against the drain hole, then snap the handle down flat to lock it in place. This cam mechanism speeds up launching and hauling out, since there is no repeated threading required once the plug is fitted.\u003c\/p\u003e\u003cp\u003eConstruction is durable stamped brass paired with a nitrile rubber seal, giving a corrosion-resistant plug with a reliable watertight gasket. This version of the 520070 series does not include a retention chain, so the plug is a standalone unit with no attached lanyard or tether. It is sized with a 1 inch drain hole diameter and a 1-1\/4 inch overall body diameter, making it suited to boats built with a 1 inch transom drain fitting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520070-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Snap Handle Drain Plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrain Hole Diameter (A):\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Body Diameter (B):\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass and nitrile rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetention Chain:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.11 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520034\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits boat drain holes sized for a 1 inch snap handle drain plug.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size drain hole does the Sea-Dog 520070-1 fit?\u003c\/strong\u003e The 520070-1 is sized for a 1 inch drain hole diameter, with an overall body diameter of 1-1\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this drain plug come with a retention chain?\u003c\/strong\u003e No, the 520070-1 does not include a retention chain. Sea-Dog also makes a version with a chain under a different part number, so check that you are ordering the correct one if you need a tethered plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog snap handle drain plug made of?\u003c\/strong\u003e It is made of stamped brass with a nitrile rubber seal, giving the 520070-1 a corrosion-resistant body and a watertight gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the snap handle mechanism work?\u003c\/strong\u003e Turn the handle clockwise to tighten the plug into the drain hole, then snap the handle down flat to lock it in place, creating a leak-proof seal without repeated threading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 520070-1 easier to use than a standard threaded drain plug?\u003c\/strong\u003e Yes, the cam-action snap handle design on the 520070-1 lets you seat and lock the plug in one motion instead of threading it in fully each time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this drain plug weigh?\u003c\/strong\u003e The Sea-Dog Snap Handle Drain Plug 520070-1 weighs 0.11 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a stainless steel version of this drain plug available?\u003c\/strong\u003e Sea-Dog also makes this snap handle drain plug in stamped stainless steel under a different part number; the 520070-1 is the brass version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 520070-1?\u003c\/strong\u003e You receive one Sea-Dog Snap Handle Drain Plug, part number 520070-1, with the brass body and nitrile rubber seal assembled and ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install this drain plug myself?\u003c\/strong\u003e Yes, the 520070-1 installs by hand into a properly sized 1 inch drain hole and is tightened using the built-in snap handle, with no tools required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The UPC for the Sea-Dog Snap Handle Drain Plug 520070-1 is 035514520034.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825977051,"sku":"S-D-520070-1","price":6.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5256.jpg?v=1784429737"},{"product_id":"sea-dog-baitwell-plug-5-8-in-cam-action-brass-nitrile-livewell-drain-plug-with-adjustable-snap-lock-handle-pair","title":"Sea-Dog Baitwell Plug 5\/8 Inch, Brass and Nitrile Rubber, Part 520093-1","description":"\u003cp\u003eThe Sea-Dog Baitwell Plug, part number 520093-1, is a 5\/8 inch cam-action drain plug built to seal livewells and baitwells against leaks. Constructed of durable stamped brass with a nitrile rubber sealing element, the plug is installed by turning the handle clockwise to tighten it into the drain hole, then snapping the handle down to lock it firmly in place. The snap lock handle is adjustable, allowing it to tighten the plug to fit most baitwells currently available, so a single plug design accommodates variation in drain fitting depth and tolerance. This 5\/8 inch size plug has a hole size of 5\/8 inch and an overall dimension of 11\/16 inch, and is sold as a pair. The brass body resists corrosion in a marine environment while the nitrile rubber provides a compressible, watertight seal against the drain fitting. Because the design relies on a cam and lever rather than threads, it can be removed and reinstalled repeatedly without wear on threads, making it a practical replacement for a worn or missing baitwell drain plug. The black-finished handle is easy to spot and grip when servicing a livewell.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520093-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Size (A):\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 11\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass and Nitrile Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520140\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1 pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole does the Sea-Dog 520093-1 baitwell plug fit?\u003c\/strong\u003e The Sea-Dog Baitwell Plug 520093-1 fits a 5\/8 inch hole size, with an overall dimension of 11\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Sea-Dog 520093-1 plug seal a livewell or baitwell?\u003c\/strong\u003e It uses a cam action nitrile rubber plug that snaps shut to form a leak-proof seal; turning the handle clockwise tightens the plug and snapping the handle down locks it in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog baitwell plug made of?\u003c\/strong\u003e Part 520093-1 is made of durable stamped brass paired with a nitrile rubber sealing element.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the handle on this plug adjustable?\u003c\/strong\u003e Yes, the snap lock handle on the Sea-Dog 520093-1 is adjustable so it can tighten the plug size to fit most baitwells currently available.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog Baitwell Plug 520093-1 weigh?\u003c\/strong\u003e It weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many plugs come in a package of part 520093-1?\u003c\/strong\u003e The Sea-Dog 520093-1 is sold as a pair (1 pair per package).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog 520093-1 baitwell plug handle?\u003c\/strong\u003e The handle finish on part 520093-1 is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you install the Sea-Dog baitwell plug?\u003c\/strong\u003e Insert the plug into the baitwell drain hole, turn the handle clockwise to tighten it against the fitting, then snap the handle down to lock the cam mechanism and complete the leak-proof seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 520093-1 plug require tools to remove?\u003c\/strong\u003e No, the cam and lever design of the 520093-1 plug allows it to be released by hand without tools, unlike a threaded plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog Baitwell Plug 5\/8 inch?\u003c\/strong\u003e The UPC for part 520093-1 is 035514520140.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other sizes of this Sea-Dog baitwell plug available?\u003c\/strong\u003e The 520093-1 is the 5\/8 inch hole size version of Sea-Dog's baitwell plug line, which is also offered in other hole sizes as separate part numbers.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988826042587,"sku":"S-D-520093-1","price":6.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8152_54af01ab-cd05-457a-a3f8-d59cee091bf6.jpg?v=1784429747"},{"product_id":"sea-dog-520094-1-baitwell-plug-3-4-cam-action-brass-nitrile-livewell-drain-plug","title":"Sea-Dog Baitwell Plug 3\/4 Inch, Brass Cam-Action Drain Plug with Snap Lock Handle","description":"\u003cp\u003eThe Sea-Dog 520094-1 Baitwell Plug is a 3\/4 inch cam-action drain plug built to seal livewells and baitwells against leaks. The plug uses a cam action design: turn the handle clockwise to tighten the plug against the drain opening, then snap the handle down to lock it in place for a leak-proof seal. The snap lock handle is adjustable, allowing the plug to be tightened to fit most baitwells currently available, so a single plug size can accommodate slight variations in drain openings.\u003c\/p\u003e\u003cp\u003eConstruction is durable stamped brass paired with a nitrile rubber seal, a combination chosen for corrosion resistance and a reliable watertight fit in marine environments. The plug measures 5.83 x 3.9 x 1.26 inches overall and weighs 0.112 pounds. It ships as a complete unit with the cam action nitrile rubber plug and the snap lock handle included, ready to install without additional hardware.\u003c\/p\u003e\u003cp\u003eThis 3\/4 inch size is one of a series of Sea-Dog baitwell plugs offered in different diameters, so boat owners should confirm the drain opening size before ordering to get the correct fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520094-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug Diameter:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Diameter:\u003c\/strong\u003e 11\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped brass and nitrile rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.83 x 3.9 x 1.26 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.112 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Cam action nitrile rubber plug, snap lock handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520157\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size drain opening does the Sea-Dog 520094-1 baitwell plug fit?\u003c\/strong\u003e The Sea-Dog 520094-1 is sized for a 3\/4 inch drain opening, with an 11\/16 inch handle diameter, and its adjustable snap lock handle allows it to be tightened to fit most baitwells currently available.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cam action plug seal against leaks?\u003c\/strong\u003e Turning the handle clockwise tightens the plug against the drain opening, and snapping the handle down locks it in place, creating a leak-proof seal for livewells and baitwells.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 520094-1 baitwell plug made of?\u003c\/strong\u003e It is constructed of durable stamped brass with a nitrile rubber seal, a combination selected for corrosion resistance and a watertight fit in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs any additional hardware needed to install this plug?\u003c\/strong\u003e No, the Sea-Dog 520094-1 ships complete with the cam action nitrile rubber plug and the snap lock handle, and installs without additional hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 520094-1?\u003c\/strong\u003e The plug measures 5.83 x 3.9 x 1.26 inches overall and weighs 0.112 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this plug work if my baitwell drain is a different size?\u003c\/strong\u003e The 520094-1 is specifically the 3\/4 inch version; Sea-Dog offers this baitwell plug in other diameters as well, so the drain opening should be measured before ordering to get the correct fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs assembly required for this baitwell plug?\u003c\/strong\u003e No, the Sea-Dog 520094-1 requires no assembly and is ready to install as received.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the handle stay adjustable after installation?\u003c\/strong\u003e Yes, the snap lock handle on the 520094-1 is adjustable, letting it be tightened to accommodate slight variations in baitwell drain openings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sea-Dog 520094-1 baitwell plug?\u003c\/strong\u003e The package includes the cam action nitrile rubber plug and the snap lock handle as a single complete unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 520094-1 suitable for saltwater use?\u003c\/strong\u003e The stamped brass and nitrile rubber construction of the 520094-1 is built for marine environments, including the corrosion exposure typical of saltwater use.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988826075355,"sku":"S-D-520094-1","price":6.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8152_50cb5fcb-c9a5-43e9-be1c-dedd50f07ec1.jpg?v=1784429750"},{"product_id":"sea-dog-520095-1-baitwell-plug-7-8-in-cam-action-brass-livewell-baitwell-drain-plug","title":"Sea-Dog Baitwell Plug 520095-1 - 7\/8 Inch Brass Drain Plug for Livewells and Baitwells","description":"\u003cp\u003eThe Sea-Dog 520095-1 is a 7\/8 inch baitwell plug built to seal livewell and baitwell drains with a cam-action locking design. To install, simply turn the handle clockwise to tighten the plug against the drain opening, then snap the handle down to lock it in place for a leak-proof seal. The snap lock handle is adjustable, allowing the plug to tighten and fit most baitwells currently available, making it a practical replacement or spare for anglers who need a reliable, no-tools installation.\u003c\/p\u003e\u003cp\u003eConstructed of durable stamped brass with a nitrile rubber seal, the 520095-1 resists the corrosion and wear that saltwater and constant water exposure cause, while the rubber component provides the compression needed for a watertight fit. The plug measures 0.75 inches wide by 1 inch high and is finished in black. It is manufactured by Sea-Dog Line, a company with a history stretching back to 1933.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520095-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped Brass and Nitrile Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 0.75 inches wide x 1 inch high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Cam-Action Snap Lock Handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520164\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 520095-1 baitwell plug?\u003c\/strong\u003e The 520095-1 baitwell plug measures 7\/8 inch, sized to fit livewell and baitwell drains of that diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the baitwell plug made of?\u003c\/strong\u003e Stamped brass and nitrile rubber make up the 520095-1 plug, giving it a durable, corrosion-resistant construction for saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 520095-1 plug seal the drain?\u003c\/strong\u003e A cam-action design seals the drain: turn the handle clockwise to tighten the plug, then snap the handle down to lock it in place for a leak-proof fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 520095-1 plug weigh?\u003c\/strong\u003e 0.4 pounds is the shipping weight of the Sea-Dog 520095-1 baitwell plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this plug fit any baitwell?\u003c\/strong\u003e The snap lock handle on the 520095-1 is adjustable, letting the plug tighten to fit most baitwells currently available, though the plug body itself is sized for a 7\/8 inch drain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the plug?\u003c\/strong\u003e The Sea-Dog 520095-1 baitwell plug is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 520095-1?\u003c\/strong\u003e The plug measures 0.75 inches wide by 1 inch high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need tools to install this plug?\u003c\/strong\u003e No tools are required to install the 520095-1: turn the handle clockwise to tighten, then press it down to lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes this baitwell plug?\u003c\/strong\u003e Sea-Dog Line manufactures the 520095-1 baitwell plug; the company's history dates back to 1933.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The UPC for the Sea-Dog 520095-1 baitwell plug is 035514520164.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988826140891,"sku":"S-D-520095-1","price":6.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8152_b1caa338-5f6a-401d-8ee2-a80404bf82db.jpg?v=1784429761"},{"product_id":"moeller-marine-042280-livewell-bait-tank-23-gallon-light-blue","title":"Moeller Marine 23 Gallon Livewell, Light Blue (Part Number 042280)","description":"\u003cp\u003eThe Moeller Marine 042280 is a 23 gallon livewell finished in light blue, built for anglers who need a dedicated onboard tank for holding bait or a catch. It is part of Moeller's Livewells \u0026amp; Bait Tanks lineup and is identified by manufacturer part number 042280. This is the light blue version of the tank; Moeller also offers the same livewell in white under part number 042280-W, so be sure to order the color that matches your boat setup.\u003c\/p\u003e\u003cp\u003eAt 13 pounds, the empty tank is light enough to mount or reposition without special equipment, while still offering a full 23 gallon capacity for keeping bait alive and active during a day on the water. It is cataloged under UPC 739729013724 for easy reordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 042280\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 23 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Light Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729013724\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Livewells \u0026amp; Bait Tanks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the capacity of the Moeller Marine 042280 livewell?\u003c\/strong\u003e The Moeller Marine 042280 livewell holds 23 gallons of water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 042280?\u003c\/strong\u003e Part number 042280 is the light blue version of Moeller Marine's 23 gallon livewell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a white version of this livewell?\u003c\/strong\u003e Yes, Moeller Marine offers the same 23 gallon livewell in white under a separate part number, 042280-W, so order 042280 specifically for the light blue color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 042280 livewell weigh?\u003c\/strong\u003e The empty Moeller Marine 042280 livewell weighs 13 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Moeller Marine 23 gallon livewell?\u003c\/strong\u003e The UPC for the light blue 042280 livewell is 739729013724.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does the 042280 belong to?\u003c\/strong\u003e 042280 is listed under Livewells \u0026amp; Bait Tanks, Moeller Marine's category for onboard bait and catch tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Moeller Marine 042280 used for?\u003c\/strong\u003e It is a livewell tank designed to be installed on a boat to hold bait or a catch in water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Moeller Marine 042280 livewell made?\u003c\/strong\u003e The 042280 livewell is made in the USA or imported, depending on production run.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991092244699,"sku":"MOE-042280","price":381.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/519zRDhjHkL.jpg?v=1784491388"},{"product_id":"moeller-marine-042280-w-23-gallon-round-livewell-bait-tank-white-20-w-x-18-h","title":"Moeller Marine 23 Gallon Round Livewell, White, 042280-W, 20 in. Width x 18 in. Height","description":"\u003cp\u003eThe Moeller Marine 042280-W is a 23 gallon round livewell built for anglers who need a reliable, ready-to-mount bait tank. Finished in white, this round livewell measures 20 inches in width and 18 inches in height, sized to fit into boat consoles, transoms, or custom livewell wells where a compact round profile is preferred over a rectangular tank. As part of Moeller Marine's livewell and bait tank line, it is designed to hold bait or catch and keep it in good condition while underway or at anchor.\u003c\/p\u003e\u003cp\u003eThe 042280-W is the white color option in this series; the same 23 gallon round livewell is also offered in light blue under part number 042280 for boat owners who want to match a different deck or console color scheme, since these are separate part numbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 042280-W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Livewells \u0026amp; Bait Tanks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 23 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729013793\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBatteries Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal round livewell; fits installations sized for a 20 inch wide, 18 inch tall round livewell opening.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Moeller Marine 042280-W livewell?\u003c\/strong\u003e The 042280-W is a 23 gallon round livewell measuring 20 inches in width and 18 inches in height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does part number 042280-W come in?\u003c\/strong\u003e Part number 042280-W is the white color version of this round livewell; the same 23 gallon round livewell is also made in light blue under part number 042280.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this livewell round or rectangular?\u003c\/strong\u003e The 042280-W is a round livewell, which makes it a good fit for console or deck cutouts sized for a circular tank rather than a rectangular one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 042280-W livewell weigh?\u003c\/strong\u003e This 23 gallon round livewell weighs 13 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons does the 042280-W hold?\u003c\/strong\u003e The Moeller Marine 042280-W holds 23 gallons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Moeller 042280-W livewell?\u003c\/strong\u003e The UPC for the white 23 gallon round livewell, part number 042280-W, is 739729013793.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 042280-W livewell require batteries?\u003c\/strong\u003e No, the 042280-W round livewell does not require batteries to operate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many livewells come in the package?\u003c\/strong\u003e The 042280-W ships as a single unit, with a package quantity of 1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Moeller Marine 042280-W livewell made?\u003c\/strong\u003e The 042280-W livewell's country of origin is the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between part number 042280 and 042280-W?\u003c\/strong\u003e Both are the same 23 gallon round livewell; 042280 is the light blue version and 042280-W is the white version, sold as distinct part numbers.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991092408539,"sku":"MOE-042280-W","price":385.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41WLNpC7UJL.jpg?v=1784491393"},{"product_id":"moeller-marine-042281-round-livewell-bait-tank-29-gallon-light-blue-23-in-diameter-x-17-in-high","title":"Moeller Marine 042281 Round Livewell, 49 Gallon, Light Blue, 23 in. Diameter x 17 in. Height","description":"\u003cp\u003eThe Moeller Marine 042281 is a round livewell built to hold 49 gallons (185 liters) of water, giving anglers a stable, high-volume tank for keeping bait or a catch alive and healthy on the water. The tank measures 23.00 inches in diameter and 17.00 inches in height (584 mm x 432 mm), a round profile that suits center-console and open-deck boat layouts where a compact footprint with strong volume is needed. It is finished in Light Blue, a color that helps anglers see fish and bait clearly against the tank walls. The round shape also distributes water pressure evenly around the tank walls, which is a common reason boat builders and anglers favor round livewells over rectangular designs for large-capacity installations.\u003c\/p\u003e\u003cp\u003eThis 49-gallon capacity places the 042281 in the same size family as the Moeller 042282 and 042284 round livewells, which are offered in other diameter and height combinations at the same 49-gallon capacity, so buyers can match the tank profile to the available space in their boat. A White version of this same 23 in. X 17 in., 49-gallon tank is sold separately as part number 042281-W for buyers who prefer that finish.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 042281\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Light Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 49 Gallons (185 Liters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 23.00 inches (584 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 17.00 inches (432 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729013731\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Livewells \u0026amp; Bait Tanks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons does the Moeller Marine 042281 livewell hold?\u003c\/strong\u003e The 042281 holds 49 gallons (185 liters) of water, making it a high-capacity round livewell for keeping bait or a catch alive on board.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this livewell?\u003c\/strong\u003e The Moeller Marine 042281 measures 23.00 inches in diameter and 17.00 inches in height (584 mm x 432 mm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 042281?\u003c\/strong\u003e Part number 042281 is finished in Light Blue. The same 23 in. X 17 in., 49-gallon tank is also available in White under part number 042281-W, which is a separate SKU.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this livewell round or rectangular?\u003c\/strong\u003e The Moeller Marine 042281 is a round livewell, a shape that distributes water pressure evenly around the tank walls at this 49-gallon capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 042281 livewell weigh?\u003c\/strong\u003e The Moeller Marine 042281 weighs 15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other sizes available in this same capacity?\u003c\/strong\u003e Yes, the 49-gallon round livewell line also includes part numbers 042282 and 042284, which are offered in other diameter and height combinations for different boat layouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Moeller Marine 042281 livewell?\u003c\/strong\u003e The UPC for the Moeller Marine 042281 livewell is 739729013731.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a round livewell typically used for?\u003c\/strong\u003e The Moeller Marine 042281 round livewell is used to hold bait or a catch alive in fresh, circulating water while on board a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I order the same tank size in a different color?\u003c\/strong\u003e Yes, the 23 in. X 17 in., 49-gallon tank is offered in Light Blue as part number 042281 and in White as part number 042281-W.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does the 042281 livewell fall under?\u003c\/strong\u003e The Moeller Marine 042281 is listed under Livewells \u0026amp; Bait Tanks.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991092474075,"sku":"MOE-042281","price":415.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/519zRDhjHkL_3c6fb0ee-a140-492f-a4bd-a63357c251e8.jpg?v=1784491402"},{"product_id":"moeller-marine-042282-w-26-gallon-oval-livewell-bait-tank-white-seamless-polyethylene","title":"Moeller 26 Gallon Round Livewell, White, Part 042282-W","description":"\u003cp\u003eThe Moeller 042282-W is a 26 gallon round livewell built for boaters who need reliable onboard bait or catch storage. It is molded in one seamless piece of rotationally-molded polyethylene, a construction method that eliminates seams and weak points, giving the tank consistent wall thickness and long-term durability against constant water exposure and UV. The tank features molded-in deck fasteners that allow for easy hold-down to the boat deck, and it ships with a drain plug for quick draining and cleaning between trips.\u003c\/p\u003e\u003cp\u003eThis 26 gallon round livewell measures 28.00 inches by 16.38 inches by 16.00 inches and weighs 15 pounds. It is finished in white and comes with a lid. The same tank is also offered in Light Blue as part number 042282 for boaters who want to match a different deck or hull color scheme, with identical dimensions and construction to this white version.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 042282-W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Livewell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 26 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Round well\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyethylene (rotationally molded)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 28.00 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 16.38 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 16.00 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith Lid:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729013816\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrain Plug:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons does the Moeller 042282-W livewell hold?\u003c\/strong\u003e The Moeller 042282-W holds 26 gallons and measures 28.00 inches by 16.38 inches by 16.00 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 042282-W livewell made of?\u003c\/strong\u003e It is molded in one seamless piece of rotationally-molded polyethylene, which gives the tank consistent wall thickness with no seams to leak or weaken over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this livewell come with a lid?\u003c\/strong\u003e Yes, the Moeller 042282-W includes a lid as part of the unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a drain for cleaning the livewell?\u003c\/strong\u003e Yes, the 042282-W ships with a drain plug for quick draining and easy cleaning between trips.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 042282-W livewell mounted to the boat deck?\u003c\/strong\u003e It features molded-in deck fasteners that allow it to be secured directly to the boat deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 042282-W?\u003c\/strong\u003e 042282-W is finished in white. The same tank is also available in Light Blue under part number 042282.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 042282-W livewell round or oval?\u003c\/strong\u003e The 042282-W is a round livewell, listed under the round well container type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 26 gallon livewell weigh?\u003c\/strong\u003e The 042282-W weighs 15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Moeller 042282-W livewell?\u003c\/strong\u003e The UPC for the Moeller 042282-W 26 gallon round livewell is 739729013816.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the white 042282-W and Light Blue 042282 livewells be used interchangeably?\u003c\/strong\u003e Yes, aside from color the 042282-W and 042282 are the same tank, sharing identical dimensions and rotationally-molded polyethylene construction.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991092572379,"sku":"MOE-042282-W","price":444.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41WLNpC7UJL_04ddcd84-56ca-4912-8322-20060be9438c.jpg?v=1784491414"},{"product_id":"moeller-marine-042283-49-gallon-round-livewell-bait-tank-light-blue-lldpe-29-x-18-in","title":"Moeller 49 Gallon Round Livewell, Light Blue, 29.00 x 18.00 Inches - Part 042283","description":"\u003cp\u003eThe Moeller 042283 is a round livewell built to hold 49 gallons, sized at 29.00 x 18.00 inches (737 mm x 457 mm). It is molded from linear low density polyethylene (LLDPE), a thermoplastic resin that is liquid when heated and solid when cooled, which gives the tank excellent chemical and corrosion resistance while keeping the material highly recyclable. This construction makes the tank well suited to holding bait and livewell water aboard a boat, resisting the corrosive effects of saltwater and fuel\/chemical exposure common in marine bait storage.\u003c\/p\u003e\u003cp\u003eThis part number, 042283, is the Light Blue color option. The same round tank in the same 29.00 x 18.00 inch size is also available in White as part number 042283-W, and a larger round livewell measuring 36.50 x 25.00 inches (927 mm x 635 mm) is sold separately as part number 042285 (with its own White version, 042285-W), so buyers who need more capacity or a different color can order the matching part number. The 042283 weighs 25.5 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 042283\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Livewell \/ Bait Tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 49 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Light Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 29.00 inches (737 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 18.00 inches (457 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Linear Low Density Polyethylene (LLDPE)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 25.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729013755\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the capacity of the Moeller 042283 livewell?\u003c\/strong\u003e The Moeller 042283 round livewell holds 49 gallons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this livewell?\u003c\/strong\u003e Part number 042283 measures 29.00 x 18.00 inches, which is 737 mm x 457 mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Moeller 042283 livewell made from?\u003c\/strong\u003e It is made from linear low density polyethylene (LLDPE), a thermoplastic resin that offers excellent chemical and corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 042283 livewell weigh?\u003c\/strong\u003e This livewell weighs 25.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 042283?\u003c\/strong\u003e 042283 is the Light Blue version of this round Moeller livewell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a white version of this livewell available?\u003c\/strong\u003e Yes, the same 29.00 x 18.00 inch round tank is also sold in White as Moeller part number 042283-W.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape is the Moeller 042283 livewell?\u003c\/strong\u003e The 042283 is a round livewell, as opposed to a rectangular tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs LLDPE resistant to saltwater and chemical exposure?\u003c\/strong\u003e Yes, the LLDPE used in the 042283 livewell provides excellent chemical and corrosion resistance, which suits it to marine bait tank use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Moeller 042283 livewell recyclable?\u003c\/strong\u003e Yes, LLDPE is a highly recyclable thermoplastic, so the 042283 livewell is made from a recyclable material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Moeller 042283 livewell?\u003c\/strong\u003e The UPC for the 29.00 x 18.00 inch Light Blue 042283 livewell is 739729013755.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 042283 livewell used for bait storage?\u003c\/strong\u003e Yes, the 042283 is categorized as a livewell \/ bait tank and is built to hold bait and livewell water aboard a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between part 042283 and part 042285?\u003c\/strong\u003e 042283 measures 29.00 x 18.00 inches while 042285 is a larger round livewell measuring 36.50 x 25.00 inches (927 mm x 635 mm); both are separate part numbers with their own Light Blue and White (042285-W) options.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991096930523,"sku":"MOE-042283","price":557.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/519zRDhjHkL_7ff5f42f-fe37-4aca-ad6d-5c98e4cd895d.jpg?v=1784491420"},{"product_id":"moeller-marine-11-16-in-id-deck-bait-well-drain-plug-2-pack-mpn-053071-10","title":"Moeller Marine Deck and Bait Well Drain Plug, 11\/16 Inch, 2-Pack, Part Number 053071-10","description":"\u003cp\u003eThis Moeller Marine deck and bait well plug is a 11\/16 inch inside diameter plug sold as a 2-pack, part number 053071-10. It is designed to seal deck and bait well drain openings on a boat, and the 2-pack keeps a spare on hand in case one is lost or damaged. Each pack weighs 0.2 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 053071-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter:\u003c\/strong\u003e 11\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729018385\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this deck plug?\u003c\/strong\u003e The Moeller Marine plug, part number 053071-10, has an 11\/16 inch inside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many plugs are included?\u003c\/strong\u003e Moeller Marine part number 053071-10 is sold as a 2-pack of deck and bait well plugs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number?\u003c\/strong\u003e The manufacturer part number for this Moeller Marine deck and bait well plug is 053071-10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes this plug?\u003c\/strong\u003e This deck and bait well plug is manufactured by Moeller Marine, part number 053071-10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 2-pack weigh?\u003c\/strong\u003e The Moeller Marine 053071-10 2-pack of plugs weighs 0.2 pounds total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this plug used for?\u003c\/strong\u003e Part number 053071-10 is intended for sealing deck and bait well drain openings on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Moeller Marine part?\u003c\/strong\u003e Yes, part number 053071-10 is a genuine Moeller Marine deck and bait well plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this item?\u003c\/strong\u003e The UPC for the Moeller Marine 053071-10 2-pack is 739729018385.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just one plug instead of two?\u003c\/strong\u003e Moeller Marine part number 053071-10 is sold as a 2-pack, not as a single plug.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991096996059,"sku":"MOE-053071-10","price":7.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MOE-053071-10_1__40282.1780061501.500.750.jpg?v=1785329133"},{"product_id":"moeller-marine-042284-w-40-gallon-oval-livewell-bait-tank-white-seamless-polyethylene","title":"Moeller Marine 49 Gallon Oval Livewell, White (042284-W)","description":"\u003cp\u003eThe Moeller Marine 042284-W is a 49 gallon (185 liter) oval livewell built for anglers who need reliable onboard bait and catch storage. Constructed from seamless, one-piece rotationally-molded polyethylene, the tank is designed to resist cracking and hold up to constant exposure to water and sun. Molded-in deck fasteners let installers secure the livewell directly to the deck without added hardware, making it straightforward to mount as a permanent fixture in a boat's live well compartment. A drain plug is built in for quick, easy draining and cleaning between trips, so the tank can be flushed out and dried without having to lift or tip it.\u003c\/p\u003e\u003cp\u003eFinished in white, the 042284-W measures 35.3 inches long by 18.25 inches wide by 18 inches high and weighs 27 pounds empty. It is part of the Moeller oval livewell lineup, which is also offered in a matching Light Blue finish (042284) for boat builders and owners who want to color-match their hull or deck. This model is a straight swap-in replacement or new installation option for boats needing a 49 gallon capacity oval tank rather than the larger 100 gallon Moeller livewells.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 042284-W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Livewell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Oval\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 49 gallons (185 liters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 35.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 18.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 27 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rotationally-molded polyethylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729015001\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the capacity of the Moeller 042284-W livewell?\u003c\/strong\u003e The Moeller 042284-W holds 49 gallons, equal to 185 liters, making it suited to boats that need a mid-size livewell rather than the larger 100 gallon Moeller models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this livewell?\u003c\/strong\u003e This oval livewell measures 35.3 inches long by 18.25 inches wide by 18 inches high, and weighs 27 pounds empty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 042284-W available in a different color?\u003c\/strong\u003e Yes, the same 49 gallon oval livewell is also sold as part number 042284 in Light Blue, for buyers who want to match a hull or deck color instead of white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the livewell made from?\u003c\/strong\u003e It is made from seamless, one-piece rotationally-molded polyethylene, a construction designed to resist cracking under constant water exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this livewell come with a drain plug?\u003c\/strong\u003e Yes, a drain plug is included for quick and easy draining and cleaning of the 042284-W between fishing trips.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the livewell mounted in a boat?\u003c\/strong\u003e The 042284-W features molded-in deck fasteners that allow it to be secured directly to the deck, making it suitable for permanent installation in a live well compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an oval or rectangular livewell?\u003c\/strong\u003e The Moeller 042284-W is an oval-shaped livewell, distinct from Moeller's rectangular or round tank options.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this livewell be used to hold live bait as well as catch?\u003c\/strong\u003e As a livewell, the 042284-W is designed for holding live bait or fish catch onboard, with its drain plug supporting regular water changes and cleaning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 49 gallon and 100 gallon Moeller livewells?\u003c\/strong\u003e The 042284-W is the 49 gallon (185 liter) oval model, while Moeller's larger oval livewells reach up to 100 gallons (379 liters) for boats needing greater bait or catch capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options exist for the Moeller oval livewell family?\u003c\/strong\u003e The 049-series oval livewells, including the 042284-W, are offered in White or Light Blue depending on the specific part number ordered.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991097028827,"sku":"MOE-042284-W","price":476.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41WLNpC7UJL_ed994371-c56c-4b6e-8bb5-e5ea11825b94.jpg?v=1784491430"},{"product_id":"moeller-5-8-in-brass-baitwell-plug-pair-mpn-053070-10","title":"Moeller Marine 5\/8 Inch Brass Baitwell Plug, Pair (053070-10)","description":"\u003cp\u003eThe Moeller Marine 5\/8 Inch Brass Baitwell Plug is a solid brass drain plug sized for 5\/8 inch livewell and baitwell drain fittings, sold as a matched pair. Brass construction resists corrosion in both fresh and salt water environments, making it a durable choice for sealing baitwell, livewell, and other small marine drain openings when the boat is docked or in storage. Each plug is designed to seat securely in its fitting to prevent water loss from the baitwell while keeping bait alive and water contained.\u003c\/p\u003e\u003cp\u003eBecause it is sold in pairs, this part number covers boats with dual baitwell or livewell drains, or gives an owner a spare on hand for quick replacement. The compact brass design is simple to insert and remove by hand for regular baitwell maintenance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 053070-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Pair (2 plugs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.11 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Moeller Marine baitwell plug, part number 053070-10?\u003c\/strong\u003e This plug is sized for 5\/8 inch baitwell and livewell drain fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many plugs come in this package?\u003c\/strong\u003e Part number 053070-10 is sold as a pair, giving you two 5\/8 inch brass baitwell plugs in one package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the baitwell plug made from?\u003c\/strong\u003e The plug is made from brass, which resists corrosion in both freshwater and saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 5\/8 inch baitwell plug weigh?\u003c\/strong\u003e Each package of the Moeller Marine 053070-10 baitwell plug pair weighs 0.11 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this plug fit a 1\/2 inch or 3\/4 inch baitwell drain?\u003c\/strong\u003e No, part number 053070-10 is sized specifically for 5\/8 inch drain openings; other sizes require a different Moeller Marine part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this baitwell plug easy to install?\u003c\/strong\u003e Yes, the brass plug is designed to be inserted and removed by hand to seal or drain a 5\/8 inch baitwell or livewell fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this plug be used for something other than a baitwell?\u003c\/strong\u003e The 5\/8 inch brass plug from Moeller Marine can be used on any drain fitting matching its 5\/8 inch size, not just baitwells.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs brass a good material choice for a marine drain plug?\u003c\/strong\u003e Brass is corrosion resistant in marine environments, which is why Moeller Marine uses it for the 053070-10 baitwell plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy the plug as a pair instead of a single unit?\u003c\/strong\u003e Part number 053070-10 comes as a pair so boats with two baitwell or livewell drains can be equipped at once, or so an extra plug is on hand as a spare.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the baitwell plug come with any hardware or fittings?\u003c\/strong\u003e This package includes only the two 5\/8 inch brass plugs; no additional hardware is included.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991097061595,"sku":"MOE-053070-10","price":6.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MOE-053070-10__69942.1780061500.500.750.jpg?v=1785329132"},{"product_id":"moeller-marine-7-8-in-id-deck-bait-well-drain-plug-053076-10-2-pack","title":"Moeller Marine 7\/8 Inch ID Deck and Bait Well Plug, 2-Pack (053076-10)","description":"\u003cp\u003eThe Moeller Marine 053076-10 is a 7\/8 inch ID deck and bait well plug sold as a 2-pack, designed to seal drain and fill fittings on boat decks and bait wells when not in use. Each plug fits fittings with a 7\/8 inch inside diameter, giving a secure seal that helps keep water out of the deck or bait well opening between uses. Having two plugs per pack means you can keep a spare on hand or outfit two separate fittings from a single purchase. These plugs are a simple, low-cost way to protect bait well and deck drain openings from debris, spray, and water intrusion when the fitting is not actively draining or filling. Made by Moeller Marine, a long-established manufacturer of marine plumbing and fuel system components, this plug is intended as a functional replacement part for boats with standard 7\/8 inch ID deck or bait well fittings.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 053076-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Deck and Bait Well Plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Inside Diameter:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 2 plugs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729018392\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size fitting does the Moeller 053076-10 plug fit?\u003c\/strong\u003e The Moeller Marine 053076-10 plug is sized for a 7\/8 inch inside diameter fitting, matching standard deck and bait well drain or fill openings of that size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many plugs come in this pack?\u003c\/strong\u003e This listing includes 2 plugs per pack, part number 053076-10 from Moeller Marine, so you can seal two fittings or keep a spare on hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this plug used for?\u003c\/strong\u003e It is used to seal deck and bait well fittings, such as drain or fill openings, when they are not actively in use, helping keep water and debris out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 053076-10 plug work on any boat deck fitting?\u003c\/strong\u003e It is designed to fit any deck or bait well fitting with a 7\/8 inch inside diameter, regardless of boat make or model, as long as the fitting matches that size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 053076-10 plug weigh?\u003c\/strong\u003e The 2-pack of Moeller 053076-10 deck and bait well plugs weighs 0.2 pounds total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this plug sold individually or as a set?\u003c\/strong\u003e The 053076-10 is sold as a set of 2 plugs, not individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes the 053076-10 deck and bait well plug?\u003c\/strong\u003e Moeller Marine manufactures the 053076-10 deck and bait well plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this plug be used for a bait well as well as a deck fitting?\u003c\/strong\u003e Yes, the 053076-10 is designed to work for both deck drain fittings and bait well fittings with a 7\/8 inch inside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Moeller 053076-10 2-pack?\u003c\/strong\u003e The UPC for the Moeller Marine 053076-10 2-pack deck and bait well plug is 739729018392.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an OEM or aftermarket part?\u003c\/strong\u003e The 053076-10 is a Moeller Marine branded plug identified by its own manufacturer part number, sold as a standard replacement plug for 7\/8 inch ID deck and bait well fittings.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991097225435,"sku":"MOE-053076-10","price":7.24,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MOE-053076-10__39704.1780061501.500.750.jpg?v=1785329132"},{"product_id":"moeller-5-8-air-chamber-plug-for-baitwells-livewells-and-dry-boxes-mpn-090801-10","title":"Moeller Air Chamber Plug 5\/8 Inch for Baitwells, Livewells and Dry Boxes","description":"\u003cp\u003eThe Moeller Air Chamber Plug (090801-10) is a black neoprene rubber plug designed to seal 5\/8 inch openings in baitwells, livewells, and dry boxes. It simply pops into the opening to create a secure, tight fit, sealing off the air chamber or compartment from water intrusion while allowing quick removal when access is needed.\u003c\/p\u003e\u003cp\u003eMade from neoprene rubber, the plug is flexible enough to seat firmly against the walls of the opening, forming a watertight seal without the need for tools or hardware. This makes it a straightforward solution for boaters who need to close off unused through-holes or access ports in onboard storage compartments, keeping baitwells and livewells properly sealed and dry boxes protected from moisture.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 090801-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Air Chamber Plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening Size:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Neoprene rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Baitwells, livewells, dry boxes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size opening does the Moeller 090801-10 air chamber plug fit?\u003c\/strong\u003e The Moeller 090801-10 air chamber plug is sized to seal 5\/8 inch openings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this plug made of?\u003c\/strong\u003e It is made of black neoprene rubber, which gives the Moeller 090801-10 the flexibility to seat tightly and form a secure seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Moeller air chamber plug meant to be used?\u003c\/strong\u003e It is designed for baitwells, livewells, and dry boxes on boats, sealing off unused 5\/8 inch openings in those compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the plug require tools to install?\u003c\/strong\u003e No tools are needed. The Moeller 090801-10 simply pops into the 5\/8 inch opening for a secure, tight fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the seal watertight?\u003c\/strong\u003e Yes, the neoprene rubber construction of the 090801-10 is designed to create a tight, secure seal that keeps water out of baitwells, livewells, and dry boxes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Moeller air chamber plug?\u003c\/strong\u003e The 090801-10 is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 090801-10 plug weigh?\u003c\/strong\u003e It weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this plug be removed and reused?\u003c\/strong\u003e The pop-in design of the Moeller 090801-10 allows it to be removed for access to the compartment and reinserted to reseal the 5\/8 inch opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the same plug as Moeller's 3\/4 inch nylon drain plug?\u003c\/strong\u003e No. The 090801-10 is a 5\/8 inch neoprene rubber air chamber plug; Moeller's 3\/4 inch nylon drain plug assembly is a separate, differently sized product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat compartments commonly use a 5\/8 inch air chamber plug?\u003c\/strong\u003e Baitwells, livewells, and dry boxes are the compartments the Moeller 090801-10 is specifically designed to seal.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991097356507,"sku":"MOE-090801-10","price":5.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Moeller090801-10-Air-Chamber-Plug__46674.1737874935.500.750.jpg?v=1785329131"},{"product_id":"moeller-marine-23-gallon-oval-livewell-bait-tank-white-roto-molded-polyethylene-043223","title":"Moeller 23 Gallon Oval Live Well, White Polyethylene, 30.25 x 16.50 x 14.50 Inches","description":"\u003cp\u003eThe Moeller 23 Gallon Oval Live Well (part number 043223) is a heavy-duty bait tank built to keep bait healthy and lively on the water. Constructed as one piece, seamless, heavy-duty Polyethylene from durable roto molded plastic, this live well is designed to resist cracking and hold up to constant marine use. It is finished in white and shaped as an oval tank measuring 30.25 inches long, 16.50 inches wide, and 14.50 inches high when unpacked.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward thanks to molded 10\/24 inch deck fasteners built into the tank for easy deck hold down. Most units come with drain plugs for quick draining and cleaning, though buyers should check with their dealer or Moeller Marine to confirm drain plug inclusion on a given unit. A recessed lid allows for quick access to bait without extra clearance needed above the tank. The tank is also ready to convert to a bait well application using a plumbing accessory kit for anglers who want circulating water.\u003c\/p\u003e\u003cp\u003eThis 23 gallon size is one of six efficient sizes Moeller offers in this live well line, with each tank size available in light blue or white. The 043223 model is the white oval version at the 23 gallon capacity, sized for boats that need a compact, deck-mountable bait tank.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 043223\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 23 Gallon Live Well\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Oval\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyethylene (roto molded)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpacked Length:\u003c\/strong\u003e 30.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpacked Width:\u003c\/strong\u003e 16.50 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpacked Height:\u003c\/strong\u003e 14.50 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaged Length:\u003c\/strong\u003e 32.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaged Width:\u003c\/strong\u003e 18.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaged Height:\u003c\/strong\u003e 15.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 17.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729002117\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Fasteners:\u003c\/strong\u003e Molded 10\/24 inch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the capacity of the Moeller 043223 live well?\u003c\/strong\u003e The Moeller 043223 is a 23 gallon live well, sized for keeping bait healthy aboard a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does part number 043223 come in?\u003c\/strong\u003e Part number 043223 is the white version of Moeller's oval live well; the same tank is also offered in light blue under a different part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the unpacked dimensions of this live well?\u003c\/strong\u003e Unpacked, the Moeller 23 gallon oval live well measures 30.25 inches long, 16.50 inches wide, and 14.50 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Moeller 043223 live well made of?\u003c\/strong\u003e It is made of one piece, seamless, heavy-duty Polyethylene using a roto molded plastic process for durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 043223 live well mounted to the deck?\u003c\/strong\u003e It includes molded 10\/24 inch deck fasteners built into the tank for easy deck hold down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this live well have a drain plug?\u003c\/strong\u003e Most units of the Moeller 23 gallon live well come with drain plugs for quick draining and cleaning, though buyers should confirm inclusion with their dealer or Moeller Marine since this can vary.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 043223 live well be converted into a bait well with circulating water?\u003c\/strong\u003e Yes, the tank is ready to convert to a bait well application when paired with a plumbing accessory kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the shipping weight of the Moeller 23 gallon live well?\u003c\/strong\u003e The Moeller 23 gallon live well (043223) weighs 17.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Moeller 043223 live well?\u003c\/strong\u003e The UPC for the Moeller 23 gallon oval white live well, part 043223, is 739729002117.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the lid on this live well sit flush with the tank?\u003c\/strong\u003e Yes, the 043223 live well has a recessed lid that allows for quick access to the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 043223 live well round or oval shaped?\u003c\/strong\u003e The 043223 is an oval-shaped live well, one of six efficient sizes offered in this Moeller line.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991097487579,"sku":"MOE-043223","price":368.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/01RmK_J4pJL.gif?v=1784491453"},{"product_id":"moeller-marine-3-4-baitwell-plug-053075-10-livewell-drain-plug-sold-as-a-pair","title":"Moeller Marine Baitwell Plug, 5\/8 Inch, Pair (Set of 2)","description":"\u003cp\u003eThis Moeller baitwell plug is a 5\/8 inch drain plug sold as a matched pair, designed to seal the drain hole of a boat's baitwell, livewell, or bilge compartment when not in use. Each card contains two plugs, giving boaters a spare on hand or a matched set for dual-drain setups. The compact, lightweight design (0.12 pounds per pair) makes it easy to keep as a replacement part in an onboard tackle box or maintenance kit. Baitwell and livewell drain plugs like this one are a simple, low-cost way to prevent water loss or unwanted drainage while keeping live bait fresh and aerated during use, then pulling the plug for quick draining and cleanout when back at the dock. As a genuine Moeller part, it is built to the manufacturer's own dimensional standard for the 5\/8 inch drain opening size, so it seats and seals as an original-equipment plug would. Because it ships on a card of two, it suits boaters who want to replace a worn or lost plug and keep a spare aboard, or who have two matching drain fittings to service at once.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 053075-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug Size:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Pair (2 plugs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.12 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729016527\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Moeller 053075-10 baitwell plug?\u003c\/strong\u003e The Moeller 053075-10 is a 5\/8 inch drain plug, sized to fit a 5\/8 inch baitwell or livewell drain opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many plugs come in this package?\u003c\/strong\u003e This listing for Moeller part number 053075-10 includes a pair, meaning two plugs on a single card.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller baitwell plug pair weigh?\u003c\/strong\u003e The pair of Moeller 053075-10 plugs weighs 0.12 pounds total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Moeller part?\u003c\/strong\u003e Yes, part number 053075-10 is a genuine Moeller Marine baitwell plug, not a generic substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a baitwell plug used for?\u003c\/strong\u003e A baitwell plug like the Moeller 053075-10 seals the drain hole of a boat's baitwell or livewell so water stays in while bait is kept alive, and it is removed to let the compartment drain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Moeller 053075-10 fit my boat's livewell?\u003c\/strong\u003e It will fit any livewell or baitwell drain opening sized for a 5\/8 inch plug; check your drain fitting's diameter against that measurement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Moeller make this plug in other sizes?\u003c\/strong\u003e Moeller offers this baitwell plug in multiple sizes under different part numbers; 053075-10 specifically is the 5\/8 inch pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just one plug instead of a pair?\u003c\/strong\u003e This listing, Moeller part 053075-10, is packaged and sold specifically as a pair of two plugs on one card.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Moeller 053075-10 baitwell plug pair carries UPC 739729016527.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install the baitwell plug?\u003c\/strong\u003e The Moeller 053075-10 plug presses or threads into the baitwell drain fitting by hand and is removed the same way to open the drain, with no tools required.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991097618651,"sku":"MOE-053075-10","price":6.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MOE-053075-10__39569.1780061501.500.750.jpg?v=1785329133"},{"product_id":"moeller-marine-1-in-brass-snap-tite-livewell-and-bailer-drain-plug-029000-11","title":"Moeller 1 Inch Brass Snap-Tite Boat Drain Plug, Clam Sell Packaging (029000-10)","description":"\u003cp\u003eThe Moeller 029000-10 is a 1 inch Brass Snap-Tite boat drain plug designed to seal the transom drain hole on boats when the vessel is in the water, and to be removed for draining when the boat is on a trailer or in storage. The snap-tite style plug uses a compressible rubber body that expands to lock into the drain tube for a watertight seal without threading or tools. Brass construction resists corrosion in both freshwater and saltwater environments, making it a durable choice for regular use season after season.\u003c\/p\u003e\u003cp\u003eThis 1 inch plug measures 0.875 inches in diameter in its relaxed state and expands to 1 inch in diameter when compressed into the drain tube, allowing it to snap securely into place. It is sold in clam sell packaging for retail display and single-unit purchase. This drain plug is a straightforward, functional replacement or spare for boat owners who need to keep an extra plug on hand or replace a worn or damaged one.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 029000-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Clam Sell Packaging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug Diameter (Compressed):\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug Diameter (Relaxed):\u003c\/strong\u003e 0.875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.19 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729290101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Drain Plug\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size drain hole does the Moeller 029000-10 fit?\u003c\/strong\u003e The Moeller 029000-10 is a 1 inch Brass Snap-Tite plug, measuring 0.875 inches in diameter when relaxed and expanding to 1 inch in diameter once compressed into the drain tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 029000-10 plug made of brass or aluminum?\u003c\/strong\u003e This particular Moeller plug, part number 029000-10, is made of brass. Moeller also offers an aluminum version of the same 1 inch Snap-Tite plug under a different part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a Snap-Tite drain plug work?\u003c\/strong\u003e A Snap-Tite plug is a compressible rubber-bodied plug that is squeezed and pushed into the transom drain tube, then expands to snap into place and form a watertight seal without any threading or tools required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need tools to install the 029000-10 drain plug?\u003c\/strong\u003e No tools are needed. The Moeller 029000-10 Snap-Tite plug is installed by hand, compressing the plug body and snapping it into the drain tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Moeller 029000-10 packaged?\u003c\/strong\u003e It comes in clam sell packaging, meaning it is sold as a single plug in retail blister-style packaging rather than in bulk.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 029000-10 drain plug weigh?\u003c\/strong\u003e The Moeller 029000-10 Brass Snap-Tite drain plug weighs 0.19 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Moeller drain plug?\u003c\/strong\u003e The UPC for the Moeller 029000-10 1 inch Brass Snap-Tite drain plug is 739729290101.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I remove my boat's drain plug?\u003c\/strong\u003e The drain plug, such as the Moeller 029000-10, should be removed whenever the boat is out of the water, such as on a trailer or in storage, to allow the bilge to drain and prevent water and rainwater buildup or freeze damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs brass better than aluminum for a boat drain plug?\u003c\/strong\u003e Brass, used in the Moeller 029000-10, is a corrosion-resistant metal well suited to both freshwater and saltwater use, while Moeller's aluminum Snap-Tite plug is a lighter-weight alternative in the same 1 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 029000-10 plug be reused?\u003c\/strong\u003e Yes, the Moeller 029000-10 Snap-Tite plug is designed to be snapped in and pulled out repeatedly for draining and re-sealing the transom drain hole each boating season.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991235277019,"sku":"MOE-029000-10","price":10.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/img_d1d835d9-a91f-4ba4-9a58-20262d6107e2.jpg?v=1785332785"},{"product_id":"t-h-marine-afd-118-aerator-filter-dome-debris-screen-for-top-of-1-1-2-thru-hull-and-pump-intakes","title":"T-H Marine AFD-118 Aerator Filter Dome, Fits Top of 1-1\/2 Inch Thru-Hull, 2.7 Inch Diameter","description":"\u003cp\u003eThe T-H Marine AFD-118 Aerator Filter Dome is a dome-shaped intake filter that protects livewell and baitwell pumps from debris in the water while maintaining efficient flow. It mounts onto the top of a 1-1\/2 inch thru-hull fitting, where its fully curved, perforated surface lets water pass through more efficiently than flat, molded filter designs. The filter top simply turns and locks tight onto a base that mounts to the top of the thru-hull, and the two-piece construction allows the dome to be twisted off for easy cleaning and reinstalled without tools other than the fasteners already used to mount the base to the thru-hull.\u003c\/p\u003e\u003cp\u003eBeyond protecting aeration and livewell pumps, the AFD-118 can also be used as a screen over overflow drains to keep them from clogging with debris. It measures 2.7 inches in diameter and is built for straightforward installation behind standard thru-hull fittings, making it a practical accessory for anglers maintaining livewell and baitwell plumbing systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AFD-118\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Aerator Filter Dome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Top of 1-1\/2 inch thru-hull fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2.7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Two-piece, twist-lock dome and base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572017779\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Mounts onto aerator pump snout or thru-hull fitting, behind standard thru-hulls\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size thru-hull does the T-H Marine AFD-118 fit?\u003c\/strong\u003e The AFD-118 Aerator Filter Dome is designed to fit the top of a 1-1\/2 inch thru-hull fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I clean the AFD-118 aerator filter?\u003c\/strong\u003e The AFD-118 uses a two-piece design where the dome top simply twists off the base, so you can rinse out debris and twist it back into place with no tools required beyond what is already used to mount the base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this filter be used for anything besides pump protection?\u003c\/strong\u003e Yes, the AFD-118 dome can also be used as a screen over overflow drains to help prevent them from clogging with debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the diameter of the AFD-118 Aerator Filter Dome?\u003c\/strong\u003e It measures 2.7 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any tools to install the AFD-118?\u003c\/strong\u003e No additional fasteners are needed beyond those already used to mount the base to the top of the thru-hull; the dome simply turns and locks onto the base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the T-H Marine AFD-118 filter dome?\u003c\/strong\u003e The AFD-118 Aerator Filter Dome is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AFD-118 aerator filter dome weigh?\u003c\/strong\u003e The AFD-118 weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the AFD-118 work with a 1-1\/8 inch thru-hull instead?\u003c\/strong\u003e No, the AFD-118 is sized for the top of a 1-1\/2 inch thru-hull; T-H Marine offers the AFD-118P as a separate part number sized for a 1-1\/8 inch thru-hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the AFD-118 protect against?\u003c\/strong\u003e The AFD-118 dome protects aeration and livewell pumps from debris in the water while its perforated, curved surface still allows efficient water flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AFD-118 a two-piece or one-piece filter?\u003c\/strong\u003e It is a two-piece design, consisting of a dome top and a mounting base, which is what allows it to be twisted apart for easy cleaning.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991259885787,"sku":"T-H-AFD-118-DP","price":9.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/fits-3-4-thru-hull-or-pump-afd-2-dp-aerator-filter-dome-28285630578731.jpg?v=1784498387"},{"product_id":"t-h-marine-automatic-aerator-control-waterproof-solid-state-livewell-pump-timer-adjustable-1-10-min-off-delay-45-sec-on-cycle-10-amp","title":"T-H Marine Automatic Aerator Control AAC-1, Waterproof Solid-State Livewell Timer, 10 Amp","description":"\u003cp\u003eThe T-H Marine Automatic Aerator Control (AAC-1) is a solid-state, panel-mount timer that automatically cycles your livewell or baitwell aerator pump on and off to keep bait and catch alive and healthy without requiring constant attention at the switch. Instead of running the pump continuously or remembering to toggle it manually, the AAC-1 turns the pump on for an auto spray time of approximately 45 seconds, then delays it off for an adjustable period ranging from about 1 minute up to a maximum of roughly 10 minutes, letting you match the aeration cycle to water temperature and fishing conditions.\u003c\/p\u003e\u003cp\u003eIts fully waterproof circuitry is built to hold up in wet, hard-running marine environments, and the unit is rated for 10 amps so it can handle the current draw of high-capacity aerator pumps. Installation is straightforward: the front panel measures 3 1\/4 x 3 1\/4 inches and needs only 3 inches of clearance behind the panel, fitting into a 3 inch round or 2-1\/2 inch square cutout. It wires easily into existing livewell aeration systems by connecting according to the included instructions, with no need to rebuild the plumbing or wiring already in place.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AAC-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Automatic Aerator Control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Rating:\u003c\/strong\u003e 10 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto Spray (On) Time:\u003c\/strong\u003e Approximately 45 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto Delay (Off) Time:\u003c\/strong\u003e 1 minute to approximately 10 minutes (maximum)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Dimensions:\u003c\/strong\u003e 3 1\/4 inches x 3 1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance Required Behind Panel:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole:\u003c\/strong\u003e 3 inch round or 2-1\/2 inch square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitry:\u003c\/strong\u003e Fully waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTimer Type:\u003c\/strong\u003e Solid-state, fully adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572005707\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for livewell and baitwell aerator pump systems; easily adaptable to existing wiring per included instructions.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the T-H Marine AAC-1 Automatic Aerator Control do?\u003c\/strong\u003e The AAC-1 is a solid-state timer that automatically turns a livewell or baitwell aerator pump on and off, cycling it to keep bait and catch supplied with oxygen-rich water without the pump running continuously.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does the pump stay on and off with the AAC-1?\u003c\/strong\u003e The auto spray (on) time is approximately 45 seconds, and the auto delay (off) time is adjustable from about 1 minute up to a maximum of roughly 10 minutes on the AAC-1 control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole is needed to install the AAC-1?\u003c\/strong\u003e A 3 inch round or 2-1\/2 inch square hole is required to mount the AAC-1 Automatic Aerator Control, with only 3 inches of clearance needed behind the panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the panel dimensions of the AAC-1?\u003c\/strong\u003e The front panel of the AAC-1 Automatic Aerator Control measures 3 1\/4 inches by 3 1\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AAC-1 aerator control waterproof?\u003c\/strong\u003e Yes, the AAC-1 has fully waterproof circuitry, making it suited to wet marine environments around a livewell or baitwell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage does the AAC-1 handle?\u003c\/strong\u003e The AAC-1 is rated for 10 amps, enough to handle the current draw of high-capacity aerator pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AAC-1 weigh?\u003c\/strong\u003e The AAC-1 Automatic Aerator Control weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the AAC-1 timer settings be adjusted?\u003c\/strong\u003e Yes, the AAC-1 features a fully adjustable solid-state timer, letting you set the off-cycle delay to match varying fishing conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AAC-1 easy to install into an existing livewell system?\u003c\/strong\u003e Installation is straightforward: the AAC-1 is easily adapted to existing systems by connecting the wiring according to the included instructions, with no need to modify existing plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the AAC-1 Automatic Aerator Control?\u003c\/strong\u003e The AAC-1 has a black finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the AAC-1 work with a high-capacity livewell pump?\u003c\/strong\u003e Yes, the AAC-1 is designed to handle a high-capacity pump's current draw at its 10 amp rating.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991259984091,"sku":"T-H-AAC-1","price":90.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/automatic-aerator-control-493347209244.jpg?v=1784498395"},{"product_id":"t-h-marine-ahv-1-livewell-aerator-spray-head-with-shut-off-valve-black","title":"T-H Marine AHV-1 Valved Aerator Spray Head for Boat Livewells and Baitwells, Black","description":"\u003cp\u003eThe T-H Marine AHV-1 is a valved aeration head built to pump fresh water into a boat's livewell or baitwell as part of a complete aeration and plumbing system. Unlike a fixed-flow spray head, the AHV-1 includes a built-in shut-off valve, giving boaters direct control over water flow into the tank rather than relying on the pump alone. The head is made of metal with a polished finish and a black exterior, and it meets the ASME A112.18.1 specification. It uses a 3\/8 inch thread size, allowing it to connect into the fittings used in standard livewell and baitwell plumbing runs. At just 0.16 pounds, it is a lightweight, compact component that installs easily into an existing aeration line. The AHV-1 is designed to be paired with other livewell plumbing components, such as a directional aerator head for creating water current, a tee fitting to split flow between aerator heads, and a thru-hull fitting for overflow control and draining, forming a complete baitwell aeration setup. It ships as a single unit. Whether replacing a worn aerator head or building out a new livewell plumbing system, the AHV-1 provides a durable, corrosion-resistant, valve-controlled water source for keeping bait alive and healthy on the water.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHV-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Livewell Hoses and Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Valved Aeration Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification Met:\u003c\/strong\u003e ASME A112.18.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5 inches (L) x 3 inches (W) x 3 inches (H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572015201\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-H Marine AHV-1 aerator head used for?\u003c\/strong\u003e The AHV-1 is a valved aeration head that pumps fresh water into a boat's livewell or baitwell as part of a plumbing and aeration system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHV-1 have a shut-off valve?\u003c\/strong\u003e Yes, the AHV-1 valved aerator head has a built-in valve that lets you control or shut off water flow into the livewell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the AHV-1 aerator head made from?\u003c\/strong\u003e Metal with a polished finish makes up the AHV-1 aerator spray head, giving it a durable, corrosion-resistant construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the AHV-1 aerator head?\u003c\/strong\u003e Black is the finish color of the T-H Marine AHV-1 valved aerator spray head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does the AHV-1 use?\u003c\/strong\u003e The AHV-1 aerator head uses a 3\/8 inch thread size for connecting into livewell plumbing lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHV-1 weigh?\u003c\/strong\u003e 0.16 pounds is the weight of the T-H Marine AHV-1 valved aeration head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions for the AHV-1?\u003c\/strong\u003e The AHV-1 aerator head is packaged at approximately 5 inches long by 3 inches wide by 3 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHV-1 sold individually?\u003c\/strong\u003e Yes, the AHV-1 aerator head ships as a single unit, with a unit count of 1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat standard does the AHV-1 meet?\u003c\/strong\u003e The AHV-1 aerator head meets the ASME A112.18.1 specification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHV-1 used with other T-H Marine livewell components?\u003c\/strong\u003e Within T-H Marine baitwell plumbing kits, the AHV-1 valved aeration head is used alongside a directional aerator head, a tee fitting, a thru-hull fitting, and an overflow drain tube to form a complete livewell aeration system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the AHV-1 and a directional aerator head like the DAH-90?\u003c\/strong\u003e The AHV-1 valved aeration head is used for pumping fresh water into the livewell, while a directional aerator head such as the DAH-90 is used for creating water current; the two perform different functions within the same baitwell aeration kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC number is associated with the AHV-1?\u003c\/strong\u003e 733572015201 is the UPC for the T-H Marine AHV-1 valved aerator head.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991261819099,"sku":"T-H-AHV1DP","price":13.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/bait-tank-and-plumbing-kit-493347733532.jpg?v=1784498468"},{"product_id":"t-h-marine-ahv-90-aerator-spray-head-90-degree-with-on-off-valve-fits-3-4-in-hose-black","title":"T-H Marine AHV-90 Aerator Spray Head with Shut-Off Valve, 90 Degree, 3\/4 Inch Hose, Black","description":"\u003cp\u003eThe T-H Marine AHV-90 is a 90 degree aerator spray head built to deliver a steady stream of aerated water into a livewell or bait tank, helping keep bait and catch healthy and active on the water. It is the screw-on valve version of T-H Marine's spray head lineup, molded in black and fitted with an integrated on-off valve so you can start, throttle, or shut off flow to an individual tank right at the fitting, without touching the pump or its wiring.\u003c\/p\u003e\u003cp\u003eThe AHV-90 uses a 3\/4 inch barb sized to fit standard 3\/4 inch ID livewell hose, with a 1-1\/16 inch mounting hole and a 3\/4 inch thread length for a secure, leak-resistant installation through the livewell wall or lid. The 90 degree spray angle makes it well suited to tight livewell layouts where a straight-through fitting would aim water at the wrong spot or interfere with a hatch or lid. It is part of a broader T-H Marine spray head family that includes straight and 90 degree heads, with and without shut-off valves, and barb sizes for both 3\/4 inch and 1-1\/8 inch hose, so you can match the exact configuration to your plumbing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHV-90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Aerator Spray Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Screw On Valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Angle:\u003c\/strong\u003e 90 Degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Valve:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Size:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Size:\u003c\/strong\u003e 1-1\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Length:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Compatibility:\u003c\/strong\u003e 3\/4 inch ID hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572015508\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the T-H Marine AHV-90 fit?\u003c\/strong\u003e The AHV-90 has a 3\/4 inch barb sized for 3\/4 inch ID hose, so it is meant for livewell plumbing built around that hose diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHV-90 have a shut-off valve?\u003c\/strong\u003e Yes, the AHV-90 is the screw-on valve version of T-H Marine's aerator spray head, with an integrated on-off valve built into the fitting so you can control flow at the head itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat spray angle does the AHV-90 have?\u003c\/strong\u003e The AHV-90 is a 90 degree spray head, directing water at a right angle from the mounting point rather than straight through, which helps route spray away from lids and hatches in tight livewells.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the AHV-90 made of?\u003c\/strong\u003e The AHV-90 aerator spray head is constructed of stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the AHV-90?\u003c\/strong\u003e The AHV-90 is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole does the AHV-90 need?\u003c\/strong\u003e The AHV-90 requires a 1-1\/16 inch mounting hole and has a 3\/4 inch thread length for installation through the livewell wall or lid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHV-90 weigh?\u003c\/strong\u003e The AHV-90 aerator spray head weighs 0.16 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the AHV-90 and other T-H Marine spray heads like the AHV-1 or AHV-92?\u003c\/strong\u003e All are aerator spray heads in the same T-H Marine family, but they differ by valve style and color: the AHV-90 is a black, screw-on valve, 90 degree head with a 3\/4 inch barb, while the AHV-1 is a fixed flange black head with a valve, and the AHV-92 is a fixed flange white head with a valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHV-90 suitable for a livewell or a bait tank?\u003c\/strong\u003e Yes, the AHV-90 is designed to spray aerated water into a livewell or bait tank to help maintain oxygen levels for live bait and catch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I control water flow to just one tank with the AHV-90?\u003c\/strong\u003e Yes, because the AHV-90 has an integrated on-off valve, you can start, reduce, or stop flow to that specific tank without changing pump wiring or affecting other tanks on the same system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHV-90 come with straight or 90 degree spray options?\u003c\/strong\u003e The AHV-90 itself is a 90 degree head; T-H Marine's spray head lineup also includes straight versions if a different spray direction is needed for your layout.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991261917403,"sku":"T-H-AHV90DP","price":12.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3-4-barbed-straight-aerator-head-with-shut-off-valve-black-ahv-1-dp-aerator-spray-heads-28008427454507.jpg?v=1784498472"},{"product_id":"t-h-marine-ahv-92-aerator-spray-head-90-degree-white-fixed-flange-with-shut-off-valve-3-4-inch-barb-for-livewells-baitwells","title":"T-H Marine AHV-92 Aerator Spray Head, 90 Degree Fixed Flange, White, 3\/4 Inch Barb with Shut-Off Valve","description":"\u003cp\u003eThe T-H Marine AHV-92 is a 90 degree aerator spray head designed to spray aerated water into livewells, keeping catch and baitfish alive during a day on the water. It uses a fixed flange mounting style with a white finish, so it installs permanently through the livewell wall or lid rather than threading on and off like a screw-on style. The 90 degree nozzle angle directs the aerated spray downward into the livewell for effective oxygenation.\u003c\/p\u003e\u003cp\u003eThis spray head includes a built-in shut-off valve, letting you stop water flow to the livewell without shutting down the whole aeration system, which is useful when running a partial load or servicing the pump. The barb accepts 3\/4 inch hose, and the fitting is sized for a 1-1\/16 inch mounting hole with a 5\/8 inch thread length for a secure, leak-resistant fit. The white color matches common livewell interiors for a clean, factory-look installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHV-92\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Fixed Flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Size:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Size:\u003c\/strong\u003e 1-1\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Length:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Valve:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572016000\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-H Marine AHV-92 used for?\u003c\/strong\u003e It is a 90 degree aerator spray head that sprays aerated water into a livewell to keep catch and baitfish alive, part number AHV-92.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the AHV-92 fit?\u003c\/strong\u003e The AHV-92 has a 3\/4 inch barb, so it fits 3\/4 inch hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHV-92 have a shut-off valve?\u003c\/strong\u003e Yes, the AHV-92 includes a built-in shut-off valve so water flow to the livewell can be stopped without shutting down the whole aeration system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the AHV-92 mounted?\u003c\/strong\u003e The AHV-92 uses a fixed flange mounting style, requiring a 1-1\/16 inch mounting hole, rather than a screw-on collar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the AHV-92 spray head?\u003c\/strong\u003e The AHV-92 is white, matching common livewell interior finishes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the thread length on the AHV-92?\u003c\/strong\u003e The threaded section of the AHV-92 measures 5\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the AHV-92 and the AH-92?\u003c\/strong\u003e Both are white, fixed-flange, 90 degree spray heads with the same 3\/4 inch barb and 1-1\/16 inch hole size, but the AH-92 has no shut-off valve while the AHV-92 includes one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the AHV-92 and the AHV-90?\u003c\/strong\u003e The AHV-92 is a white fixed-flange spray head with a 5\/8 inch thread length, while the AHV-90 is a black screw-on valve style with a longer 3\/4 inch thread length; both include a shut-off valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHV-92 spray head weigh?\u003c\/strong\u003e The AHV-92 weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHV-92 a genuine T-H Marine part?\u003c\/strong\u003e Yes, the AHV-92 is a genuine T-H Marine part, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the AHV-92?\u003c\/strong\u003e The AHV-92 ships as a single fixed-flange, 90 degree aerator spray head with its integrated shut-off valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the AHV-92 fit a 1-1\/8 inch hose?\u003c\/strong\u003e No, the AHV-92 is sized for 3\/4 inch hose; T-H Marine's AHV-1890 is the fixed-flange model sized for 1-1\/8 inch hose.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991262081243,"sku":"T-H-AHV-92","price":10.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3-4-barbed-straight-aerator-head-with-shut-off-valve-black-ahv-1-dp-aerator-spray-heads-28008427454507_57d1b13e-85f9-4eae-9049-1968a309b2eb.jpg?v=1784498479"},{"product_id":"t-h-marine-bwk-2-bait-tank-and-plumbing-kit-complete-baitwell-rigging-90-degree-overflow-drain-tube-1-1-8-thru-hull-aeration-and-directional-flow-heads-3-4-tee","title":"T-H Marine BWK-2 Complete Baitwell Kit - Overflow Drain Tube, Thru-Hull, Aeration Heads and Tee for Livewells and Bait Tanks","description":"\u003cp\u003eThe T-H Marine BWK-2 Complete Baitwell Kit is a full plumbing package for rigging a livewell or bait tank, bundling every fitting needed for aeration, directional water flow, and overflow drainage into one kit. Instead of sourcing individual fittings, anglers and boat builders get matched components designed to work together: a 90 degree overflow drain tube for clean top-pull draining, a 1-1\/8 inch thru-hull fitting that handles overflow control, drain plugging, and well draining, a valved aeration head for bringing in fresh water, a directional aerator head for creating current inside the tank, and a 3\/4 inch tee for connecting both aerator heads to a single aerator pump.\u003c\/p\u003e\u003cp\u003eThe overflow drain tube uses T-H Marine's push-in design: the flexible vinyl end simply pushes into the thru-hull opening, so draining the livewell is as easy as pulling the tube out from the top rather than reaching into the water for a drain plug. All plumbing connects with standard hose barbs and threaded fittings, and the kit is plumbed according to detailed installation instructions included with the parts. This kit suits new baitwell installs as well as replacement or upgrade jobs on existing tanks, and covers the aeration, flow, and drainage needs of a single livewell or bait tank setup in one purchase.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e BWK-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Complete Baitwell Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e ODT-190 90 degree overflow drain tube, 1-1\/8 inch thru-hull fitting for overflow control\/drain plugging\/well draining, AHV-1 valved aeration head, DAH-90 directional aerator head, 3\/4 inch tee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThru-Hull Size:\u003c\/strong\u003e 1-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTee Connection:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 13 x 5 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.49 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572020458\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal livewell \/ baitwell plumbing kit; not vehicle- or engine-specific\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the T-H Marine BWK-2 kit include?\u003c\/strong\u003e The BWK-2 Complete Baitwell Kit includes 5 pieces: a 90 degree overflow drain tube, a 1-1\/8 inch thru-hull fitting for overflow control, drain plugging, and well draining, a valved aeration head for pumping in fresh water, a directional aerator head for current creation, and a 3\/4 inch tee to connect both aerator heads to an aerator pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit work for any size livewell or bait tank?\u003c\/strong\u003e The BWK-2 kit is a universal plumbing kit built around a 1-1\/8 inch thru-hull and 3\/4 inch tee connection, so it fits standard livewell and bait tank plumbing rather than one specific boat model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the overflow drain tube work?\u003c\/strong\u003e The included 90 degree overflow drain tube is a push-in design: the flexible vinyl end pushes into the thru-hull opening, and to drain the livewell you simply pull the tube out from the top instead of reaching into the water for a drain plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the thru-hull fitting used for in the BWK-2 kit?\u003c\/strong\u003e The 1-1\/8 inch thru-hull fitting included in the BWK-2 kit handles overflow control, drain plugging, and well draining in one fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the valved aeration head and the directional aerator head in this kit?\u003c\/strong\u003e The valved aeration head (AHV-1) is used for pumping fresh water into the tank, while the directional aerator head (DAH-90) is aimed to create current inside the tank; the BWK-2 kit includes both.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the tee fitting for?\u003c\/strong\u003e The 3\/4 inch tee included with the BWK-2 kit connects both aerator heads to a single aerator pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the BWK-2 kit components made from?\u003c\/strong\u003e The components in the T-H Marine BWK-2 kit are made of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the BWK-2 Complete Baitwell Kit weigh?\u003c\/strong\u003e The BWK-2 Complete Baitwell Kit weighs 0.49 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any other parts to install the BWK-2 kit?\u003c\/strong\u003e The BWK-2 kit is plumbed according to detailed installation instructions included with the parts, using the provided overflow drain tube, thru-hull, aeration heads, and tee to complete a livewell plumbing setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the BWK-2 kit?\u003c\/strong\u003e The T-H Marine BWK-2 Complete Baitwell Kit components are black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the BWK-2 kit sold as individual parts or as a set?\u003c\/strong\u003e The BWK-2 is sold as a complete 5-piece set combining the overflow drain tube, thru-hull fitting, both aerator heads, and the connecting tee in one kit.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991262212315,"sku":"T-H-BWK2","price":35.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/bait-tank-and-plumbing-kit-493347733532_18fef276-1f2b-4818-85f2-58698b868461.jpg?v=1784498491"},{"product_id":"t-h-marine-g-force-conservation-cull-system-gen-2-color-coded-tournament-culling-system-with-balance-beam-and-6-buoys-mpn-gfc-ccsg2","title":"T-H Marine G-Force Conservation Cull System Gen 2, Stainless Steel Spring-Loaded Non-Penetrating Clips, 6 Color-Coded Buoys","description":"\u003cp\u003eThe T-H Marine G-Force Conservation Cull System Gen 2 (GFC-CCSG2) is a color-coded fish culling system built for tournament anglers who need to organize and manage their catch quickly and safely. Each system uses stainless steel spring-loaded clips that operate with one hand, letting you cull a fish without fumbling for a second hand or setting down your rod. The clips are non-penetrating, meaning they secure around the fish's lip without puncturing it, which reduces stress and injury to the fish and supports safe catch-and-release conservation practices.\u003c\/p\u003e\u003cp\u003eThe system includes 6 color-coded buoys, so each fish can be assigned its own line and clip for instant identification when it's time to check your limit or cull down to your best fish. A balance beam is included as part of the kit, and each buoy has a built-in holder for quick, tidy storage of the cull clip when not in use. The stronger plastic clip design holds tight around the lip so fish stay secured in the livewell without slipping loose. Overall dimensions and design follow the Gen 2 version of T-H Marine's Conservation Cull System, distinct from the original Conservation Cull System.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e GFC-CCSG2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Livewells \u0026amp; Bait Tanks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClip Material:\u003c\/strong\u003e Stainless steel, spring-loaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuoy\/Body Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multi (color-coded)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Buoys:\u003c\/strong\u003e 6 color-coded buoys\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClip Operation:\u003c\/strong\u003e One-hand operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClip Type:\u003c\/strong\u003e Non-penetrating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Balance beam, 6 color-coded buoys, cull clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Bass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572100129\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8375 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-H Marine G-Force Conservation Cull System Gen 2?\u003c\/strong\u003e The GFC-CCSG2 is a color-coded fish culling system with stainless steel spring-loaded clips, a balance beam, and 6 color-coded buoys, designed for organizing and safely holding fish in a livewell during tournament fishing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many buoys and clips are included?\u003c\/strong\u003e The GFC-CCSG2 kit includes 6 color-coded buoys with matching cull clips, along with a balance beam.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the clips be operated with one hand?\u003c\/strong\u003e Yes, the spring-loaded stainless steel clips on the GFC-CCSG2 are designed for one-hand operation, so you can cull a fish without needing a free hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the clips harm the fish?\u003c\/strong\u003e No, the GFC-CCSG2 uses non-penetrating clips that hold around the fish's lip without puncturing it, reducing stress and injury and supporting safe release.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the clips made of?\u003c\/strong\u003e The cull clips on the GFC-CCSG2 are stainless steel and spring-loaded, paired with a stronger plastic clip body that holds tight around the lip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is each buoy made of?\u003c\/strong\u003e The buoys included with the GFC-CCSG2 are plastic and color-coded for quick identification of each culled fish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the GFC-CCSG2 weigh?\u003c\/strong\u003e The T-H Marine G-Force Conservation Cull System Gen 2 weighs 0.8375 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a balance beam included with this system?\u003c\/strong\u003e Yes, a balance beam is included in the GFC-CCSG2 kit along with the 6 color-coded buoys and clips.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do the buoys store when not in use?\u003c\/strong\u003e Each buoy on the GFC-CCSG2 has a built-in holder for quick and easy storage of its cull clip when the buoy is not attached to a fish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the Gen 2 version of the Conservation Cull System?\u003c\/strong\u003e Yes, the GFC-CCSG2 is the Gen 2 version of T-H Marine's Conservation Cull System.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the recommended use for this culling system?\u003c\/strong\u003e The GFC-CCSG2 is recommended for bass fishing and tournament culling applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cull clips come in one GFC-CCSG2 unit?\u003c\/strong\u003e One GFC-CCSG2 unit includes a full set of 6 color-coded cull clips with matching buoys and a balance beam.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991263064283,"sku":"T-H-GFC-CCSG2-DP","price":68.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/g-force-conservation-cull-system-gen-2-30144396329003.jpg?v=1784498539"},{"product_id":"t-h-marine-odt-2-overflow-drain-tube-18-in-straight-with-screen-for-1-1-2-in-thru-hull-livewell-and-baitwell-drains","title":"T-H Marine ODT-2 Overflow Drain Tube - 18 Inch Straight Push-In Tube with Screen, Fits 1-1\/2 Inch Thru-Hulls","description":"\u003cp\u003eThe T-H Marine ODT-2 is an 18 inch straight overflow drain tube built to fit all T-H Marine 1-1\/2 inch thru-hull fittings. It is a push-in style tube that combines the overflow and drain function of a livewell or baitwell into a single fitting, so the boat only needs one hole and one thru-hull to handle both jobs. The design pairs a tough, flexible vinyl boot end with a rigid white PVC standpipe. To install, the vinyl boot is simply pushed into the opening of the thru-hull fitting for a snug, watertight seal with no tools, clamps, or adhesive required. To drain the livewell or baitwell, the tube is pulled straight up and out from the top, so there is no need to reach into the water or pull a plug from underneath.\u003c\/p\u003e\u003cp\u003eThe outside diameter of the tube and boot is 1 5\/8 inches, sized to seat securely in a 1-1\/2 inch thru-hull opening. The tube ships with a screen installed to help keep debris out of the drain line, and the screen can be trimmed to set a custom tube length for the installation. Construction is marine grade PVC throughout, giving the tube resistance to UV exposure, chemicals, and the general wear of freshwater or saltwater use. This is a straight-tube design intended for draining through the floor of the livewell or baitwell; T-H Marine also offers a 90 degree version, the ODT-290, for side wall draining installations.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ODT-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Straight, Push-In\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Thru-Hull Diameter:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter (Tube and Boot):\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Wall Thickness:\u003c\/strong\u003e 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyvinyl Chloride (PVC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen:\u003c\/strong\u003e Included, trimmable to length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572014044\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits all T-H Marine 1-1\/2 inch thru-hull fittings\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size thru-hull does the ODT-2 fit?\u003c\/strong\u003e The ODT-2 is built to fit all T-H Marine 1-1\/2 inch thru-hull fittings, with an outside diameter of 1-5\/8 inches on the tube and boot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the straight or 90 degree overflow tube?\u003c\/strong\u003e The ODT-2 is the straight version, designed for draining through the floor of a livewell or baitwell; the 90 degree equivalent for side wall draining is the ODT-290.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the push-in installation work?\u003c\/strong\u003e The vinyl boot end of the ODT-2 is inserted directly into the opening of the thru-hull fitting for a secure, watertight fit with no tools, clamps, or adhesive needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you drain the livewell with this tube?\u003c\/strong\u003e Simply pull the ODT-2 tube up and out from the top of the thru-hull to start draining, so there is no need to reach into the water to remove a plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ODT-2 come with a screen?\u003c\/strong\u003e Yes, the ODT-2 ships with a screen installed to help block debris from entering the drain line, and the screen can be trimmed for a custom fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the ODT-2 made of?\u003c\/strong\u003e The ODT-2 is built from marine grade PVC, with a flexible vinyl boot end and a rigid white PVC standpipe, giving it resistance to UV, chemicals, and long-term water exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the ODT-2 tube be cut to a shorter length?\u003c\/strong\u003e The screen on the ODT-2 comes loose so it can be trimmed to set a custom tube length for the installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the ODT-2 overflow drain tube?\u003c\/strong\u003e The ODT-2 is 18 inches long in its standard straight configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes T-H Marine make a smaller version of this tube?\u003c\/strong\u003e Yes, the ODT-1 is the equivalent overflow drain tube sized for 7\/8 inch thru-hull fittings, compared to the 1-1\/2 inch fitting size of the ODT-2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the ODT-2 tube?\u003c\/strong\u003e The ODT-2 overflow drain tube is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this tube function as both the overflow and the drain?\u003c\/strong\u003e Yes, the ODT-2 combines overflow and drain functions in one fitting, so only a single hole and thru-hull are needed in the livewell or baitwell.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991269683419,"sku":"T-H-ODT-2-DP","price":31.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/UC-1_01_17454c46-5d92-484f-9fad-d5589446df6a.jpg?v=1784498935"},{"product_id":"whitecap-industries-1-2-inch-brass-boat-drain-plug-plug-only","title":"Whitecap Industries 1\/2 Inch Brass Drain Plug, Packaged, S-5052C","description":"\u003cp\u003eThe Whitecap Industries S-5052C is a 1\/2 inch brass drain plug sold individually and retail-packaged. It is designed to seal a standard 1\/2 inch drain hole on a boat hull, livewell, cooler, or bilge fitting, providing a corrosion-resistant closure that stands up to continuous exposure to fresh and salt water. Brass construction resists the rust and pitting that steel plugs are prone to, making it a reliable choice for below-the-waterline and wet-area applications where a dependable, long-lasting seal matters.\u003c\/p\u003e\u003cp\u003eThis listing is for the plug only, so it is well suited as a direct replacement when an existing 1\/2 inch brass plug is lost, damaged, or worn, without the added cost of a full kit. Its compact, simple design threads or fits into a standard 1\/2 inch drain opening, making installation straightforward for routine maintenance or seasonal boat prep.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Whitecap Industries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e S-5052C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Drain Plugs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Packaged, plug only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725060505219\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size drain hole does the S-5052C fit?\u003c\/strong\u003e The Whitecap Industries S-5052C is sized for a 1\/2 inch drain opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the plug only, or does it come with a chain or gasket?\u003c\/strong\u003e This listing is for the S-5052C plug only, with no chain, gasket, or other hardware included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Whitecap Industries S-5052C made from?\u003c\/strong\u003e It is made from brass, chosen for its resistance to corrosion in wet marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the S-5052C drain plug weigh?\u003c\/strong\u003e 0.25 pounds is the weight of the Whitecap Industries S-5052C drain plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill brass corrode faster than a stainless or plastic drain plug?\u003c\/strong\u003e Brass, as used in the S-5052C, is naturally corrosion resistant and holds up well to both fresh and salt water exposure over repeated use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the S-5052C sold individually or in a multi-pack?\u003c\/strong\u003e The S-5052C is packaged and sold as a single plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this drain plug be used on a livewell or cooler in addition to a boat hull?\u003c\/strong\u003e Yes, a 1\/2 inch brass plug like the S-5052C can be used anywhere a standard 1\/2 inch drain opening needs to be sealed, including livewells, coolers, and bilge fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Whitecap Industries S-5052C genuine or aftermarket?\u003c\/strong\u003e The S-5052C is a genuine Whitecap Industries part, identified by its manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install the S-5052C drain plug?\u003c\/strong\u003e The S-5052C is installed by fitting it into the 1\/2 inch drain opening it is sized for, replacing a lost, damaged, or worn plug in the same location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Whitecap Industries S-5052C?\u003c\/strong\u003e The UPC for the S-5052C brass drain plug is 725060505219.\u003c\/p\u003e","brand":"Whitecap Industries","offers":[{"title":"Default Title","offer_id":49025296629979,"sku":"W-C-S-5052C","price":6.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/S-5052C__96546.1722362974.500.750.jpg?v=1785329221"},{"product_id":"shurhold-1825-shrimp-and-shad-dip-net-17-x-20-inch-pear-shaped-mesh-bait-net","title":"Shurhold 1825 Shrimp and Shad Dip Net - 17 x 20 Inch Pear-Shaped Mesh Bait Net","description":"\u003cp\u003eThe Shurhold 1825 Shrimp and Shad Dip Net is a pear-shaped bait net built for scooping shrimp, shad, minnows, and other live bait from a dock, pier, seawall, or boat without letting your catch slip back through the mesh. The 17 inch x 20 inch net head uses fine mesh netting specifically designed to prevent small, fast-moving bait from escaping while you scoop, giving you a controlled, gentle capture that keeps your bait alive and in good condition for later use. The pear-shaped head design improves control and reach when you are working around pilings, lights, and other structure where shrimp and shad tend to gather. The net hoop uses a nylon mesh body on an aluminum frame for a shape that holds up under repeated dips. This is a net-only attachment: it is not sold with a handle, and instead connects to any Shurhold handle (sold separately), so you can pair it with the length and style of handle that best suits how and where you fish. At 0.8 pounds, it is light enough to swing and lift a full scoop without fatigue, and its straightforward, no-frills build reflects Shurhold's approach to hard-working marine gear meant for frequent use in demanding conditions on the water.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurhold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1825\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fishing Attachment (Dip Net)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Shape:\u003c\/strong\u003e Pear-shaped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Opening Dimensions:\u003c\/strong\u003e 17 inches x 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh Type:\u003c\/strong\u003e Fine mesh netting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Material:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame Material:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 25 inches long x 20 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e Sold separately; compatible with all Shurhold handles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 703485318256\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Shurhold 1825 Shrimp and Shad Dip Net used for?\u003c\/strong\u003e It is a bait dip net designed for scooping shrimp, shad, minnows, and other live bait from a dock, pier, seawall, or boat, using a fine mesh head that keeps small bait from slipping back through.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Shurhold 1825 dip net include a handle?\u003c\/strong\u003e No. The 1825 is a net-only attachment that connects to any Shurhold handle, which is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the net opening on the 1825 dip net?\u003c\/strong\u003e The Shurhold 1825 has a 17 inch x 20 inch pear-shaped net opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Shurhold 1825 dip net made of?\u003c\/strong\u003e The net head uses fine nylon mesh netting mounted on an aluminum frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill small shrimp or minnows escape through the mesh?\u003c\/strong\u003e No. The 1825 uses fine mesh netting specifically designed to prevent small, fast-moving bait like shrimp and minnows from slipping through while you scoop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich handles fit the Shurhold 1825 dip net?\u003c\/strong\u003e Any Shurhold handle works with the 1825 net; the handle is sold separately from the net itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Shurhold 1825 dip net weigh?\u003c\/strong\u003e 0.8 pounds, making it light to handle and lift a full scoop of bait.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 1825 net?\u003c\/strong\u003e The net measures 25 inches long by 20 inches wide overall, with a 17 inch x 20 inch pear-shaped mesh head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the pear-shaped design better than a round net for bait scooping?\u003c\/strong\u003e The pear shape of the Shurhold 1825 gives better control and reach when working around pilings, lights, and other structure where bait congregates, compared to a simple round hoop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 1825 dip net be used from a boat as well as a dock or pier?\u003c\/strong\u003e Yes, the Shurhold 1825 is designed for use from a dock, pier, seawall, or boat when targeting shrimp and shad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1825 dip net durable enough for frequent use?\u003c\/strong\u003e Yes. The nylon mesh and aluminum frame construction is built to hold its shape under repeated dips and regular use in the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Shurhold 1825 Shrimp and Shad Dip Net different from the Shurhold Crab Net?\u003c\/strong\u003e The 1825 has a larger 17 x 20 inch pear-shaped fine-mesh head sized for shrimp, shad, and minnows, while Shurhold's Crab Net has a smaller 12 inch x 13 inch opening with a 15 inch deep treated nylon net built for crabbing; both attach to a separately sold Shurhold handle.\u003c\/p\u003e","brand":"Shurhold","offers":[{"title":"Default Title","offer_id":49026424144091,"sku":"SUR-1825","price":134.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/1825-2_8.jpg?v=1785025846"},{"product_id":"beckson-marine-dp10-b-screw-in-drain-plug-assembly-black-1-inch","title":"Beckson Marine DP10-B Screw-In Drain Plug Assembly, Black, 1 Inch","description":"\u003cp\u003eThe Beckson Marine DP10-B Screw-In Drain Plug Assembly is a black, screw-type drain plug engineered with a patented self-cleaning thread design that helps keep the plug free of debris and easy to turn over repeated use. An O-ring provides a watertight seal at the mounting point, while super strength center retaining legs secure the center of the plug in place while draining, preventing it from working loose or falling out mid-drain.\u003c\/p\u003e\u003cp\u003eThis drain plug is designed for installation in a 1 inch ID hole and is intended to be mounted using two stainless steel fasteners. When installing, position the gap in the thread at the lowest point of the mounting hole so water drains fully and does not pool around the plug. It is a practical fit for the transom of personal watercraft and small boats, as well as fish wells, coolers, ice chests, and water tanks where a secure, removable drain point is needed.\u003c\/p\u003e\u003cp\u003eIts solid, low-profile design and corrosion-resistant construction make it a reliable choice anywhere a threaded drain closure is required, whether replacing a worn or damaged plug or outfitting a new build.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Beckson Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e DP10-B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 021083001432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Design:\u003c\/strong\u003e Self-cleaning screw-in thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal:\u003c\/strong\u003e O-ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetention:\u003c\/strong\u003e Super strength center retaining legs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Mounting Hole:\u003c\/strong\u003e 1 inch ID\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware Needed:\u003c\/strong\u003e Two stainless steel fasteners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e Position gap in thread at lowest point of hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical Applications:\u003c\/strong\u003e Personal watercraft transom, small boats, fish wells, coolers, ice chests, water tanks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits a 1 inch ID mounting hole; suited to the transom of personal watercraft and small boats, and to fish wells, coolers, ice chests, and water tanks.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole does the Beckson DP10-B drain plug fit?\u003c\/strong\u003e The Beckson Marine DP10-B is designed to be mounted in a 1 inch ID hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the DP10-B drain plug include a seal?\u003c\/strong\u003e Yes, the DP10-B has an O-ring that seals against the mounting hole to keep water out when the plug is closed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the DP10-B drain plug installed?\u003c\/strong\u003e Mount it in a 1 inch ID hole using two stainless steel fasteners, with the gap in the thread positioned at the lowest point of the hole so the area drains completely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this drain plug?\u003c\/strong\u003e The DP10-B Screw-In Drain Plug Assembly is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps the plug from loosening while draining?\u003c\/strong\u003e Super strength center retaining legs hold the center of the DP10-B in place during draining so it will not work loose or fall out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the self-cleaning thread design for?\u003c\/strong\u003e The DP10-B's patented self-cleaning thread design helps prevent debris buildup on the threads so the plug continues to turn smoothly over repeated use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can this drain plug be used?\u003c\/strong\u003e It is suited for the transom of personal watercraft and small boats, as well as fish wells, coolers, ice chests, and water tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the DP10-B drain plug weigh?\u003c\/strong\u003e The Beckson DP10-B weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with the DP10-B?\u003c\/strong\u003e Installation calls for two stainless steel fasteners; the drain plug is designed to be secured in the 1 inch ID hole with this hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the thread gap position matter during installation?\u003c\/strong\u003e Positioning the gap in the thread at the lowest point of the mounting hole ensures water fully drains out rather than pooling around the DP10-B plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the DP10-B a screw-in or push-in style drain plug?\u003c\/strong\u003e The DP10-B is a screw-in, threaded drain plug assembly, not a push-in style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this drain plug be used in coolers or water tanks, not just boats?\u003c\/strong\u003e Yes, the DP10-B is suited for fish wells, coolers, ice chests, and water tanks in addition to personal watercraft and small boat transoms.\u003c\/p\u003e","brand":"Beckson Marine","offers":[{"title":"Default Title","offer_id":49027435167963,"sku":"BEC-DP10-B","price":6.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/BEC-DP10-B_lg__53817.1558112112.500.750.jpg?v=1785163337"},{"product_id":"jabsco-fish-box-evacuation-pump-12v-diaphragm-5-gpm-1-1-2-inch-ports","title":"Jabsco Fish Box Evacuation Pump, 12V Diaphragm, 5 GPM, 1-1\/2 Inch Ports","description":"\u003cp\u003eThe Jabsco Fish Box Evacuation Pump is a 12V diaphragm pump built to empty a fishbox or livewell quickly after a day on the water. Fish boxes and livewells often collect bait residue, ice particles, fish scales, and other typical debris, and this pump's diaphragm design is made to pass that debris rather than clog on it. A 360 degree rotatable head lets it be mounted in nearly any position in the boat, giving flexible installation options where space is tight.\u003c\/p\u003e\u003cp\u003eThis is a self-priming, dry-running pump, meaning it will not be damaged by running without water present, which is common in fish box and livewell drain applications where water levels drop intermittently. No filter is required ahead of the pump, keeping the installation simple and reducing maintenance. It connects using 38mm (1-1\/2 inch) ports and moves up to 19 lpm (5 US gpm) of flow, so it is sized to evacuate a fish box or livewell in a reasonable amount of time.\u003c\/p\u003e\u003cp\u003eThe pump is finished in black plastic and runs on a 12V permanent magnet motor drawing 10A, protected by a 15A fuse. It is built to comply with ISO 8846 MARINE and USCG ignition protection regulations, and it meets BSEN 50081 for electromagnetic compatibility, making it suitable for use around fuel systems and marine electronics.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 50900-1000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e Up to 19 lpm (5 US gpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmp Draw:\u003c\/strong\u003e 10A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuse Size:\u003c\/strong\u003e 15A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Connections:\u003c\/strong\u003e 38mm (1-1\/2 inch) ports\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Rotation:\u003c\/strong\u003e 360 degree rotatable head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePriming:\u003c\/strong\u003e Self-priming, dry running capable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards Compliance:\u003c\/strong\u003e ISO 8846 MARINE and USCG Regulations for Ignition Protection; meets BSEN 50081 (Electro Magnetic Compatibility)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 671880575911\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Jabsco 50900-1000 pump used for?\u003c\/strong\u003e The Jabsco 50900-1000 is a diaphragm pump designed to evacuate a fishbox or livewell after a day of fishing, clearing out water along with typical debris like bait residue, ice particles, and fish scales.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this pump handle debris, or just clean water?\u003c\/strong\u003e Yes, the 50900-1000 diaphragm pump is specifically designed to pass typical fishbox debris such as bait residue, particles of ice, and fish scales, not just clean water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Jabsco Fish Box Evacuation Pump self-priming?\u003c\/strong\u003e Yes, the 50900-1000 is self-priming and has dry-running capability, so it will not be damaged if it runs without water in the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this pump run on?\u003c\/strong\u003e This Jabsco Fish Box Evacuation Pump (50900-1000) runs on 12V, drawing 10A and protected by a 15A fuse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose fittings does the 50900-1000 use?\u003c\/strong\u003e The pump connects using 38mm (1-1\/2 inch) ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much flow does this pump provide?\u003c\/strong\u003e The 50900-1000 delivers up to 19 lpm, which is about 5 US gallons per minute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this pump be mounted in any orientation?\u003c\/strong\u003e Yes, the Jabsco 50900-1000 has a 360 degree rotatable head, allowing it to be mounted in almost any position in the boat for flexible installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pump need an inline filter?\u003c\/strong\u003e No, the 50900-1000 does not require a filter, which keeps installation simple and reduces ongoing maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pump body made of?\u003c\/strong\u003e The Jabsco Fish Box Evacuation Pump has a black plastic body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Jabsco 50900-1000 weigh?\u003c\/strong\u003e This pump weighs 3.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump ignition protected for use near fuel systems?\u003c\/strong\u003e Yes, the 50900-1000 complies with ISO 8846 MARINE and USCG Regulations for Ignition Protection, and it also meets BSEN 50081 for electromagnetic compatibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Jabsco 50900-1000 only for fishboxes?\u003c\/strong\u003e It is designed and marketed as a fish box evacuation pump, though its diaphragm design and livewell-suited debris handling make it well suited to similar evacuation tasks around the boat.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028223467739,"sku":"ITT-50900-1000","price":419.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/50900-1000__59240.1722364700.500.750.jpg?v=1785164587"},{"product_id":"johnson-pump-34014-basspirator-livewell-aerator-kit-500-gph-12-volt","title":"Johnson Pump 34014 Basspirator Livewell Aerator Kit, 500 GPH, 12 Volt","description":"\u003cp\u003eThe Johnson Pump 34014 Basspirator Livewell Aerator Kit is a complete 12 volt aeration system built for anglers who need to keep water fresh and oxygenated in a live well or bait well. At the core of the kit is a 500 GPH cartridge pump that circulates fresh water continuously, drawing only 1.4 amps so it can run for extended periods without straining a boat's electrical system. The kit is designed as a full installation solution rather than a standalone pump: it includes two 1 inch overflow fittings and hose so excess water and debris can pass out of the livewell, an illuminated fuse switch for safe, visible on\/off control, 7 feet of hose to route water from the pump to the well, hose clamps to secure every connection, and 16 feet of 16-gauge wire to run power from the pump to the switch and battery. Installation instructions are included, making this a practical kit for anglers upgrading or replacing an aging aerator setup. Because it is a self-contained kit with its own pump, hose, wiring, and fittings, it fits a universal range of live well and bait well setups rather than being limited to a specific boat or engine model. Whether used to keep bait lively on a long day of fishing or to maintain a livewell full of catch, the Basspirator 34014 kit provides the pump, plumbing, and electrical components needed in a single package.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Johnson Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 34014\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Livewell Aerator Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Flow Rate:\u003c\/strong\u003e 500 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Draw:\u003c\/strong\u003e 1.4 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 7 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Diameter:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverflow Fittings:\u003c\/strong\u003e Two 1 inch fittings with hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 16 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 16 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 729321340144\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe Johnson Pump 34014 Basspirator Livewell Aerator Kit is a universal-fit kit intended for live wells and bait wells generally, rather than a specific boat, engine, or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are published for the Johnson Pump 34014 Basspirator Livewell Aerator Kit.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Johnson Pump 34014 Basspirator kit?\u003c\/strong\u003e The kit includes a 500 GPH cartridge pump, two 1 inch overflow fittings and hose, 7 feet of hose, an illuminated fuse switch, hose clamps, 16 feet of 16-gauge wire, and installation instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat flow rate does the Basspirator livewell pump provide?\u003c\/strong\u003e The Johnson Pump 34014 cartridge pump is rated at 500 GPH, providing continuous circulation to keep water fresh in a livewell or baitwell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and amp draw does this kit require?\u003c\/strong\u003e This kit runs on 12 volts and draws 1.4 amps, making it suitable for standard boat electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Johnson Pump 34014 fit a specific boat or engine model?\u003c\/strong\u003e No. The 34014 Basspirator kit is a universal-fit livewell aerator kit rather than a part designed for a specific boat, engine, or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the hose included with the Basspirator kit?\u003c\/strong\u003e The kit includes 7 feet of hose along with two 1 inch overflow fittings and additional fitting hose for routing water and handling overflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the overflow fittings on the 34014 kit?\u003c\/strong\u003e The Johnson Pump 34014 kit includes two 1 inch overflow fittings with hose to let excess water and debris pass out of the livewell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gauge and length of wire comes with this kit?\u003c\/strong\u003e The Basspirator 34014 kit includes 16 feet of 16-gauge wire for connecting the pump, fuse switch, and power source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the purpose of the illuminated fuse switch?\u003c\/strong\u003e The illuminated fuse switch included in the Johnson Pump 34014 kit provides a visible, protected on\/off control for the aerator pump circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Johnson Pump 34014 aerator kit made of?\u003c\/strong\u003e The Basspirator 34014 kit's pump and fittings are made of plastic construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Johnson Pump 34014 Basspirator kit weigh?\u003c\/strong\u003e The complete kit weighs 4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used for both livewells and baitwells?\u003c\/strong\u003e Yes. The Johnson Pump 34014 is designed for use in either a live well or a bait well to keep water circulating fresh.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 34014 kit come with installation instructions?\u003c\/strong\u003e Yes, installation instructions are included with the Basspirator 34014 kit along with hose clamps to secure all connections.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":49028227039451,"sku":"JON-34014","price":180.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/JON-34014__03438.1722494392.500.750.jpg?v=1785164650"},{"product_id":"johnson-pump-60000-cartridge-aerator-kit-1000-gph-12v-livewell-and-baitwell-aerator-pump","title":"Johnson Pump 60000 Cartridge Aerator Kit, 1000 GPH 12V Livewell and Baitwell Aerator Pump","description":"\u003cp\u003eThe Johnson Pump 60000 Cartridge Aerator Kit is a complete 12 volt aerator pump system built to fill, aerate, and empty a livewell or baitwell. At the center of the kit is a cartridge aerator pump with a low current draw of 3.4 amps, so it can run for extended periods without putting excessive strain on the boat's battery. The kit is rated to move up to 1000 gallons per hour and is designed to work in both fresh and saltwater applications.\u003c\/p\u003e\u003cp\u003eA key feature is the split-design aeration spray bar, which allows for flexible mounting positions to suit different livewell or bait tank layouts. The pump itself can be installed either hard-mounted with screws or set in place using the included suction feet, giving boat owners flexibility depending on the mounting surface available. The kit bundles everything needed for a functional aeration setup in one package, from tubing and wiring to battery connection hardware and a foam filter, making it a straightforward way to add reliable aeration to an existing tank or container. Backed by Johnson Pump's reputation for dependable marine pump technology, the Cartridge Aerator Kit is intended to deliver years of consistent service for anglers who need to keep bait alive and fresh on the water.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Johnson Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 60000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 1000 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 3.4 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.96 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Screws or supplied suction feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Application:\u003c\/strong\u003e Fresh or saltwater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multicoloured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e Mounting brackets, 5 feet of flexible tubing, battery clips, suction feet, aeration spray bar, 10 feet of wire, fish foam filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 729321916561\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Johnson Pump 60000 Cartridge Aerator Kit do?\u003c\/strong\u003e It fills, aerates, and empties a livewell or baitwell using a 12 volt cartridge aerator pump rated at 1000 GPH, keeping bait alive and fresh in fresh or saltwater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the pump in the 60000 kit mounted?\u003c\/strong\u003e The Johnson Pump 60000 can be hard-mounted with screws or set in place using the included suction feet, whichever suits the tank or container being used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much current does the Johnson Pump 60000 draw?\u003c\/strong\u003e It draws 3.4 amps at 12 volts, a low current draw designed to minimize strain on the boat battery during extended use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 60000 aerator kit be used in saltwater?\u003c\/strong\u003e Yes, the Johnson Pump Cartridge Aerator Kit is built for use in both fresh and saltwater applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the Johnson Pump 60000 kit?\u003c\/strong\u003e The kit includes mounting brackets, 5 feet of flexible tubing, battery clips, suction feet, an aeration spray bar, 10 feet of wire, and a fish foam filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Johnson Pump 60000 Cartridge Aerator Kit weigh?\u003c\/strong\u003e The complete kit weighs 1.96 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the 60000 aerator pump?\u003c\/strong\u003e The pump is rated at 1000 GPH (gallons per hour).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the aeration spray bar's design feature?\u003c\/strong\u003e The Johnson Pump 60000 uses a split-design aeration spray bar that allows for flexible mounting positions in different tank layouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Johnson Pump 60000 require drilling holes to install?\u003c\/strong\u003e No, the kit can be installed using the supplied suction feet, meaning it can be set up in a tank or ice chest without drilling any holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Johnson Pump 60000 made from?\u003c\/strong\u003e The Cartridge Aerator Kit is made from plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Johnson Pump 60000 a full replacement for a built-in livewell system?\u003c\/strong\u003e It functions as a portable aeration solution that can be added to an existing tank or container rather than a permanently installed livewell system, offering a lower-cost way to aerate bait.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Johnson Pump 60000 run on?\u003c\/strong\u003e The Cartridge Aerator Kit operates on 12 volts DC.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":49028227170523,"sku":"JON-60000","price":105.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/60000__12536.1722487618.500.750.jpg?v=1785164650"},{"product_id":"johnson-pump-intake-filter-for-aerator-pump-77125","title":"Johnson Pump Intake Filter for Aerator Pump, 77125","description":"\u003cp\u003eThe Johnson Pump Intake Filter, part number 77125, is a two-piece filter designed to mount directly onto an aerator pump fitting. It protects the pump from debris intake while drawing water, helping the pump run cleanly and extending its usable life. The two-piece design allows the filter to mount onto the pump fitting for straightforward fit-up during installation or replacement. This filter is built as a replacement for older Mayfair model intake filters, giving boat owners with that earlier equipment a compatible upgrade path without having to source a discontinued part. It is constructed of durable plastic in a beige finish, sized as a compact accessory that fits into the aerator pump's water intake line. Because it is a wear item exposed to constant water flow and occasional debris, it is a part worth keeping on hand as a spare so a clogged or degraded filter can be swapped out quickly rather than leaving the aerator pump running unprotected. The Johnson Pump 77125 intake filter is sold as a single unit and is the correct choice whenever an aerator pump's intake needs a genuine Johnson Pump filter for reliable, uninterrupted operation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Johnson Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 77125\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Intake Filter for Aerator Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Two-piece filter, mounts onto pump fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Beige\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 729321771252\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e 3000.5296\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts onto aerator pump fittings\u003c\/li\u003e\n\u003cli\u003eReplacement for older Mayfair model intake filters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Johnson Pump 77125 intake filter fit?\u003c\/strong\u003e The Johnson Pump 77125 is an intake filter that mounts directly onto an aerator pump fitting, protecting the pump's water intake from debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this filter compatible with older Mayfair intake filters?\u003c\/strong\u003e Yes, the Johnson Pump 77125 intake filter is a replacement for older Mayfair model intake filters, so it can be used to update or replace that earlier equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 77125 filter made of?\u003c\/strong\u003e It is made of plastic and finished in beige.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Johnson Pump 77125 filter weigh?\u003c\/strong\u003e The Johnson Pump 77125 intake filter weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces does the intake filter come in?\u003c\/strong\u003e The Johnson Pump 77125 uses a two-piece design that mounts onto the pump fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Johnson Pump 77125 a genuine Johnson Pump part?\u003c\/strong\u003e Yes, part number 77125 is a genuine Johnson Pump intake filter for aerator pumps, not a generic substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install the 77125 intake filter?\u003c\/strong\u003e The two-piece Johnson Pump 77125 filter mounts onto the aerator pump's fitting, allowing for direct installation without additional adapters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 77125 filter?\u003c\/strong\u003e Ordering part number 77125 includes one Johnson Pump intake filter for an aerator pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does an aerator pump need an intake filter?\u003c\/strong\u003e An intake filter such as the Johnson Pump 77125 keeps debris out of the aerator pump's water intake, helping the pump run reliably and last longer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Johnson Pump 77125 intake filter?\u003c\/strong\u003e The Johnson Pump 77125 intake filter has a beige finish.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":49028227825883,"sku":"MAY-77125","price":9.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MAY-77125_lg__55965.1604346366.500.750.jpg?v=1785164657"},{"product_id":"marine-metal-products-pbc-5-5-gallon-bait-saver-livewell-bulk-packaging","title":"Marine Metal Products PBC-5 5 Gallon Bait Saver Livewell, Bulk Packaging","description":"\u003cp\u003eThe Marine Metal Products PBC-5 is a 5 gallon bait saver livewell designed to keep live bait fresh and active while you fish. Sized for anglers who need a self-contained bait well without permanent boat installation, the PBC-5 holds a 5 gallon volume of water and bait, giving you enough capacity for a day on the water without constantly refilling or re-baiting. It is supplied in bulk packaging, making it a straightforward choice for anglers, bait shops, and guides who want the livewell itself without additional retail packaging.\u003c\/p\u003e\u003cp\u003eAt 12 pounds, the PBC-5 is manageable to carry to and from the boat or dock when filled with water and bait. Whether used on a small boat, a kayak, or from shore, it functions as a portable holding tank to keep bait lively and ready to use throughout your trip.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Marine Metal Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PBC-5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 5 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Bulk\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 029326963905\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the capacity of the Marine Metal Products PBC-5 bait saver livewell?\u003c\/strong\u003e The Marine Metal Products PBC-5 holds 5 gallons, giving anglers enough volume to keep a supply of live bait active for a day of fishing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the PBC-5 bait saver livewell weigh?\u003c\/strong\u003e The PBC-5 weighs 12 pounds, which is manageable to carry to and from a boat, kayak, or dock when in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Marine Metal Products PBC-5 sold in retail packaging?\u003c\/strong\u003e No, the PBC-5 is sold in bulk packaging rather than individual retail packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a bait saver livewell used for?\u003c\/strong\u003e A bait saver livewell, such as the Marine Metal Products PBC-5, is used to hold and keep live bait fresh and active while fishing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the PBC-5 be used on small boats or kayaks?\u003c\/strong\u003e Yes, at a 5 gallon capacity and 12 pound weight, the PBC-5 is sized to be portable enough for use on small boats, kayaks, or from shore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the PBC-5 livewell?\u003c\/strong\u003e The PBC-5 is made by Marine Metal Products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat part number should I reference when ordering this livewell?\u003c\/strong\u003e Reference part number PBC-5 from Marine Metal Products when ordering this 5 gallon bait saver livewell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5 gallon size refer to water capacity or bait capacity?\u003c\/strong\u003e The Marine Metal Products PBC-5 has a 5 gallon overall capacity for holding water and live bait together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PBC-5 suitable for guides or bait shops needing multiple units?\u003c\/strong\u003e Since the Marine Metal Products PBC-5 is sold in bulk packaging, it is a practical option for guides or bait shops that need multiple units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with the Marine Metal Products PBC-5?\u003c\/strong\u003e The Marine Metal Products PBC-5 5 gallon bait saver livewell carries UPC 029326963905.\u003c\/p\u003e","brand":"Marine Metal Products","offers":[{"title":"Default Title","offer_id":49031095877851,"sku":"MMP-PBC-5","price":82.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_e49bdce6-8046-4e09-a4cb-0ba2db65c1dd.jpg?v=1785350581"},{"product_id":"marine-metal-pb-5-14-inch-bait-saver-aerator-12-volt-sealed-bait-bucket-aerator-pump","title":"Marine Metal PB-5 14 Inch Bait Saver Aerator, 12 Volt Sealed Bait Bucket Aerator Pump","description":"\u003cp\u003eThe Marine Metal PB-5 is a 14 inch sealed bait saver aerator built to keep live bait active and healthy in a bucket or livewell. Running on 12 volts and drawing only 3\/4 amp, the PB-5 is designed to run for extended periods off a boat battery without placing a heavy load on the electrical system. The sealed pump produces a steady, dense stream of bubbles to keep water oxygenated while operating very quietly, making it well suited for anglers who want a dependable aerator without excess noise at the boat or dock.\u003c\/p\u003e\u003cp\u003eThe PB-5 comes with a filter to help protect the pump from debris, a 6 foot electrical cord for flexible placement away from the battery, and large solid copper battery clips for a secure, corrosion-resistant connection to a 12 volt power source. The unit is a pump only; a bucket is not included, so it can be added to an angler's existing bait bucket or livewell setup. At 14 inches in length, the PB-5 is compact enough to fit inside standard bait buckets while still delivering enough aeration for typical live bait storage needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Marine Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PB-5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bait Bucket Aerator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 3\/4 amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAeration Capacity:\u003c\/strong\u003e 40 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Cord Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Clips:\u003c\/strong\u003e Large solid copper battery clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBucket Included:\u003c\/strong\u003e No, pump only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 15.5 x 3.5 x 2 inches (39.37 cm L x 8.89 cm W x 5.08 cm H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Taiwan, Province of China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 029326963752\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Marine Metal PB-5 aerator used for?\u003c\/strong\u003e The Marine Metal PB-5 is a bait saver aerator that keeps live bait oxygenated in a bucket or livewell, with a rated aeration capacity of 40 gallons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PB-5 aerator 12 volt or does it need household power?\u003c\/strong\u003e It runs on 12 volts and draws only 3\/4 amp, so the Marine Metal PB-5 can run for extended periods off a boat battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the PB-5 come with a bucket?\u003c\/strong\u003e No, the PB-5 is a pump only and does not include a bucket; it is meant to be added to an existing bait bucket or livewell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Marine Metal PB-5 aerator?\u003c\/strong\u003e The PB-5 measures 14 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the electrical cord on the PB-5?\u003c\/strong\u003e The PB-5 has a 6 foot electrical cord, giving flexibility in positioning the pump relative to the battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of battery clips are included with the PB-5?\u003c\/strong\u003e The PB-5 includes large solid copper battery clips for a secure, corrosion-resistant connection to a 12 volt battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the PB-5 aerator include a filter?\u003c\/strong\u003e Yes, a filter is included with the Marine Metal PB-5 to help protect the pump from debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the PB-5 aerator weigh?\u003c\/strong\u003e The Marine Metal PB-5 weighs 5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the PB-5 aerator made?\u003c\/strong\u003e The PB-5 is manufactured in Taiwan, Province of China.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PB-5 aerator quiet when running?\u003c\/strong\u003e Yes, the sealed PB-5 pump is designed to run very quietly while producing a steady stream of bubbles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the PB-5?\u003c\/strong\u003e The PB-5 ships in packaging measuring 15.5 x 3.5 x 2 inches (39.37 cm L x 8.89 cm W x 5.08 cm H).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the pump on the PB-5 sealed?\u003c\/strong\u003e Yes, the Marine Metal PB-5 uses a sealed 12 volt aerator pump.\u003c\/p\u003e","brand":"Marine Metal Products","offers":[{"title":"Default Title","offer_id":49033321218267,"sku":"MMP-PB-5","price":55.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51PRu2PckPL.jpg?v=1785244629"},{"product_id":"moeller-marine-oval-livewell-bait-tank-light-blue-available-in-40-49-gallon","title":"Moeller Marine Oval Livewell \/ Bait Tank, Light Blue - Available in 40 \u0026 49 Gallon","description":"\u003cp\u003eKeep your bait lively and your catch fresh with the Moeller Marine Oval Livewell, a molded plastic bait tank built for anglers who need reliable onboard water storage. Sized to fit into center consoles, transom wells, or custom deck installations, this oval tank is engineered from durable plastic that resists cracking, fading, and saltwater corrosion far better than metal alternatives. The smooth, rounded interior reduces dead spots where bait can get trapped or injured, helping keep shrimp, minnows, and other live bait active and healthy on long days on the water. Choose between the 40 gallon and 49 gallon capacities to match your boat's available space and the volume of bait or catch you need to carry.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Moeller Marine\u003c\/li\u003e\n\u003cli\u003eCategory: Livewell \/ Bait Tank\u003c\/li\u003e\n\u003cli\u003eShape: Oval\u003c\/li\u003e\n\u003cli\u003eColor: Light Blue\u003c\/li\u003e\n\u003cli\u003eMaterial: Molded plastic\u003c\/li\u003e\n\u003cli\u003eCapacities: 40 gallon and 49 gallon\u003c\/li\u003e\n\u003cli\u003eApproximate dimensions (40 gallon): 35.3 in L x 18.25 in W x 18 in H\u003c\/li\u003e\n\u003cli\u003eApproximate weight (40 gallon): 27 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis livewell is offered in two capacities. The 40 gallon oval tank (Part Number 042284) suits smaller boats or anglers who need a compact bait well that still holds a solid volume of water. The 49 gallon oval tank (Model 042282) offers extra capacity for larger catches, bigger bait loads, or boats with more room to dedicate to a livewell installation. Both share the same Light Blue color and oval profile, so choose based on the footprint available in your boat and how much bait or fish you plan to carry.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"40 Gallon Oval","offer_id":49046061187291,"sku":"MOE-042284","price":470.49,"currency_code":"USD","in_stock":true},{"title":"49 Gallon Oval","offer_id":49046061220059,"sku":"MOE-042282","price":436.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/042284__43635.1722493337.500.750_8e6f875c-6750-4a01-acc5-98393759e709.jpg?v=1785393685"},{"product_id":"rule-jabsco-tournament-series-aerator-pump-replacement-motor-cartridges-500-to-1100-gph","title":"Rule\/Jabsco Tournament Series Aerator Pump Replacement Motor Cartridges - 500 to 1100 GPH","description":"\u003cp\u003eKeep your livewell aerator running at full strength without replacing the entire pump housing. This Tournament Series replacement motor cartridge line drops directly into compatible Jabsco\/Rule Tournament Series aerator pump bodies, restoring full flow rate with a snap-in design that requires no rewiring or special tools. Each cartridge is built with a synthetic, corrosion-resistant housing rated for 12 volt marine electrical systems, and matched to a specific flow rate so your livewell keeps bait and catch oxygenated all day on the water.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Rule \/ Jabsco\u003c\/li\u003e\n\u003cli\u003eVoltage: 12 Volts\u003c\/li\u003e\n\u003cli\u003eDesign: Snap-in replacement cartridge\u003c\/li\u003e\n\u003cli\u003eMaterial: Synthetic housing\u003c\/li\u003e\n\u003cli\u003eCompatibility: Tournament Series aerator pumps only (not compatible with Pro-Series)\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty: 3 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThese cartridges are available in three flow rates - 500 GPH, 800 GPH, and 1100 GPH - matched to specific Tournament Series pump models. Check the model number stamped on your existing pump housing (such as 405C, 405STC, or 405FC) or your livewell's rated flow requirement before ordering, since installing a cartridge with the wrong flow rate can under- or over-power your aerator system.\u003c\/p\u003e","brand":"Rule","offers":[{"title":"500 GPH (45DR)","offer_id":49048957157595,"sku":"RUL-45DR","price":42.2,"currency_code":"USD","in_stock":true},{"title":"800 GPH (46DR)","offer_id":49048957190363,"sku":"RUL-46DR","price":49.1,"currency_code":"USD","in_stock":true},{"title":"1100 GPH (47DR)","offer_id":49048957223131,"sku":"RUL-47DR","price":52.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61YNdL7BJAL_1a632bbf-749a-4668-a83e-1db4b62979f0.jpg?v=1785445509"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/1825-2_8.jpg?v=1785356918","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-fishing-accessories-livewells-baitwells.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}