{"title":"Outriggers \u0026 Rigging","description":null,"products":[{"product_id":"sea-dog-565050-1-stainless-steel-rigging-knife-with-marlin-spike-shackle-key-screwdriver-and-bottle-opener","title":"Sea-Dog Stainless Steel Rigging Knife with Marlin Spike, 8-7\/16 Inch Blade, 565050-1","description":"\u003cp\u003eThe Sea-Dog 565050-1 Rigging Knife is a multi-tool marine knife built for sailors, riggers, and anglers who need a compact, corrosion-resistant tool on hand. Constructed of 304 stainless steel, it combines a sharp fixed blade with a Marlin spike, a shackle key, a screw driver, and a bottle opener in one handle, so a single tool covers line work, shackle pins, small fasteners, and everyday deck tasks. The blade measures 8-7\/16 inches and the Marlin spike measures 2-1\/2 inches, giving enough reach to splice line or free a jammed shackle without extra tools. A loop is built into the handle for attaching a lanyard (lanyard not included), letting the knife be tethered to a belt, PFD, or rigging so it is not lost overboard. The 304 stainless steel construction resists corrosion from saltwater spray and marine environments, making this knife suited to long-term use on deck, at the helm, or in a tackle or tool box. Its compact, all-in-one design makes it a practical addition for sailboat rigging, fishing trips, and general marine utility work where a dedicated marlinspike knife is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 565050-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rigging Knife\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length:\u003c\/strong\u003e 8-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarlin Spike Length:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.276 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Tools:\u003c\/strong\u003e Blade, Marlin Spike, Shackle Key, Screw Driver, Bottle Opener, Lanyard Attachment Loop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Shape:\u003c\/strong\u003e Drop Point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Edge:\u003c\/strong\u003e Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Fishing, Marine Utility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCare Instructions:\u003c\/strong\u003e Hand Wash Only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514565028\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat tools are built into the Sea-Dog 565050-1 Rigging Knife?\u003c\/strong\u003e The Sea-Dog 565050-1 combines a sharp blade, a Marlin spike, a shackle key, a screw driver, and a bottle opener in a single handle, plus a loop for attaching a lanyard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the blade length on this rigging knife?\u003c\/strong\u003e The blade on the Sea-Dog 565050-1 measures 8-7\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Marlin spike?\u003c\/strong\u003e The Marlin spike on the Sea-Dog 565050-1 Rigging Knife measures 2-1\/2 inches, enough reach for opening shackles and working splices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 565050-1 Rigging Knife made from?\u003c\/strong\u003e It is constructed of 304 stainless steel, which resists corrosion in saltwater and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the rigging knife come with a lanyard?\u003c\/strong\u003e No, the Sea-Dog 565050-1 has a loop built into the handle for attaching a lanyard, but the lanyard itself is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 565050-1 Rigging Knife weigh?\u003c\/strong\u003e It weighs 0.276 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this knife suitable for fishing as well as sailing?\u003c\/strong\u003e Yes, the Sea-Dog 565050-1 is designed for both fishing and general marine utility use, thanks to its combination blade and rigging tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape and edge does the blade have?\u003c\/strong\u003e The Sea-Dog 565050-1 has a drop point blade with a flat edge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should the rigging knife be cleaned and cared for?\u003c\/strong\u003e The Sea-Dog 565050-1 is hand wash only; despite its corrosion-resistant 304 stainless steel construction, hand washing helps maintain the finish over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the handle also stainless steel?\u003c\/strong\u003e Yes, the handle of the Sea-Dog 565050-1 Rigging Knife is stainless steel, matching the blade for consistent corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the Sea-Dog 565050-1?\u003c\/strong\u003e Ordering the Sea-Dog 565050-1 includes the rigging knife itself with its integrated blade, Marlin spike, shackle key, screw driver, and bottle opener; a lanyard is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the shackle key on this knife handle common marine shackles?\u003c\/strong\u003e The Sea-Dog 565050-1 includes a built-in shackle key intended for freeing and adjusting shackle pins as part of its multi-tool design.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988826665179,"sku":"S-D-565050-1","price":23.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5308.jpg?v=1784429805"},{"product_id":"t-h-marine-g-force-silencer-trolling-motor-vibration-pad-black-fits-motorguide-and-minn-kota-mounts-gfes-blk","title":"T-H Marine G-Force Equalizer Trolling Motor Vibration Pad - Black, Fits MotorGuide and Minn Kota Mounts","description":"\u003cp\u003eThe T-H Marine G-Force Equalizer Trolling Motor Vibration Pad in black is a simple trolling motor mount modification designed to help extend the life of your trolling motor and improve how it functions on the water. Made from durable plastic, the pad is custom cut to fit both MotorGuide and Minn Kota trolling motor mounts, creating a soft padded surface that eliminates abrasive metal-on-metal contact at the mount point. This contact point is where trolling motor mounts typically wear fastest and where the harsh clanking noise happens every time the motor is pulled out of the water or stowed for transport.\u003c\/p\u003e\u003cp\u003eBy cushioning this contact area, the G-Force Equalizer pad reduces noise and vibration during operation and while stowing, quiets the clanking associated with raising and lowering the motor, and helps protect the mount hardware from abrasive wear over time. Installation is a quick add-on to the existing mount, requiring no permanent modification to the trolling motor or boat. The package includes pad material sized for both MotorGuide and Minn Kota mount styles, so the correct piece is on hand regardless of which brand of trolling motor is installed. This black pad (part number GFES-BLK) is also offered in a red version under a separate part number for boaters who want to match hull or gear color.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e GFES-BLK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.1 x 4 x 4.9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.02 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572086607\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e MotorGuide and Minn Kota trolling motor mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e Pad material for both MotorGuide and Minn Kota mount styles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMotorGuide trolling motor mounts\u003c\/li\u003e\n\u003cli\u003eMinn Kota trolling motor mounts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the T-H Marine G-Force Equalizer pad do?\u003c\/strong\u003e The GFES-BLK pad creates a soft padded surface at the trolling motor mount point, eliminating abrasive metal-on-metal contact that causes wear and noise.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this pad fit a MotorGuide trolling motor mount?\u003c\/strong\u003e Yes, the GFES-BLK G-Force Equalizer pad is custom cut to fit MotorGuide trolling motor mounts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pad work with Minn Kota mounts too?\u003c\/strong\u003e Yes, the same package includes pad material sized for Minn Kota trolling motor mounts in addition to MotorGuide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pad made of?\u003c\/strong\u003e The G-Force Equalizer vibration pad (GFES-BLK) is made of plastic, chosen for durability at the metal contact point on the mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options are available?\u003c\/strong\u003e This part number, GFES-BLK, is the black version; a red version of the G-Force Equalizer pad is also available under a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much noise reduction should I expect when stowing my trolling motor?\u003c\/strong\u003e The pad is designed to quiet the harsh clanking noise that occurs when pulling the trolling motor out of the water or stowing it, by cushioning the metal mount contact point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation difficult?\u003c\/strong\u003e No, the GFES-BLK pad is a simple add-on to the existing trolling motor mount and does not require modifying the motor or boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the pad?\u003c\/strong\u003e The G-Force Equalizer Trolling Motor Vibration Pad measures 0.1 x 4 x 4.9 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the pad weigh?\u003c\/strong\u003e The GFES-BLK vibration pad weighs 0.02 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the package?\u003c\/strong\u003e The package for part number GFES-BLK contains pad material sized for both MotorGuide and Minn Kota trolling motor mounts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pad help extend the life of my trolling motor mount?\u003c\/strong\u003e Yes, by eliminating metal-to-metal contact, the G-Force Equalizer pad reduces wear and helps extend the life of the trolling motor mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine T-H Marine part?\u003c\/strong\u003e Yes, the G-Force Equalizer Trolling Motor Vibration Pad, part number GFES-BLK, is a genuine T-H Marine product.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991263260891,"sku":"T-H-GFES-BLK-DP","price":5.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/black-g-force-silencer-trolling-motor-vibration-pad-28279050829867.jpg?v=1784498555"},{"product_id":"t-h-marine-g-force-trolling-motor-handle-and-cable-heavy-duty-nylon-jacketed-stainless-steel-lift-and-release-system-cushioned-grip-fits-most-makes-and-models-gfh-1g-black","title":"T-H Marine G-Force Handle GFH-1G Trolling Motor Replacement Lift and Release Cable, Black","description":"\u003cp\u003eThe T-H Marine G-Force Handle GFH-1G is a trolling motor replacement lift and release system built to solve the problem of cheap, failure-prone factory lift ropes. It pairs a rugged, nylon-jacketed stainless steel cable with a large, cushioned grip handle in black, giving anglers a durable alternative to the stock ropes and handles that often break at the worst possible moment, especially during tournaments.\u003c\/p\u003e\u003cp\u003eThe patented G-Force Handle design is endorsed by B.A.S.S. Elite Pro Gerald \"G-Man\" Swindle and is built to withstand repeated, hard use in the field. It comes complete with a hook-and-loop strap so the handle can be secured to the motor shaft while underway, keeping it out of the way and preventing loss or damage in transit. The handle is designed to fit most trolling motor makes and models.\u003c\/p\u003e\u003cp\u003eFor Garmin Force trolling motors, the GFH-1G works by using the handle with the motor's existing cable. Note that this handle is not recommended for use on Minn Kota Edge or Motorguide Pro models. Motorguide Xi5 owners will need the clamp-on G-Force Handle (GFH-CA1R), which is a separate part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e GFH-1G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip Type:\u003c\/strong\u003e Cushioned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Material:\u003c\/strong\u003e Nylon-Jacketed Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 27.71 inches long x 6.5 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Handle, nylon-jacketed stainless steel cable, hook-and-loop securing strap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand Orientation:\u003c\/strong\u003e Ambidextrous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572077704\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trolling Motor Parts \u0026amp; Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits most trolling motor makes and models\u003c\/li\u003e\n\u003cli\u003eGarmin Force models: use the G-Force Handle with the motor's existing cable\u003c\/li\u003e\n\u003cli\u003eNot recommended for use on Minn Kota Edge or Motorguide Pro models\u003c\/li\u003e\n\u003cli\u003eMotorguide Xi5 requires the clamp-on G-Force Handle, part number GFH-CA1R, sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the T-H Marine G-Force Handle GFH-1G?\u003c\/strong\u003e The GFH-1G includes the cushioned grip handle, a nylon-jacketed stainless steel cable, and a hook-and-loop strap for securing the handle to the motor shaft while underway.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the GFH-1G fit my trolling motor?\u003c\/strong\u003e The G-Force Handle GFH-1G fits most trolling motor makes and models, though it is not recommended for use on Minn Kota Edge or Motorguide Pro models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the GFH-1G work with Garmin Force trolling motors?\u003c\/strong\u003e Yes. On Garmin Force models, the G-Force Handle GFH-1G is used together with the motor's existing cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a version of this handle for the Motorguide Xi5?\u003c\/strong\u003e Motorguide Xi5 owners need the clamp-on G-Force Handle, part number GFH-CA1R, which is a separate product from the GFH-1G.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cable made of?\u003c\/strong\u003e The GFH-1G uses a rugged, nylon-jacketed stainless steel cable designed to hold up to repeated hard use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the GFH-1G handle?\u003c\/strong\u003e The GFH-1G G-Force Handle comes with a black cushioned grip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the G-Force Handle weigh?\u003c\/strong\u003e The T-H Marine G-Force Handle GFH-1G weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the GFH-1G handle?\u003c\/strong\u003e The GFH-1G measures 27.71 inches long by 6.5 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the handle stay attached to the motor while running?\u003c\/strong\u003e A hook-and-loop strap included with the GFH-1G secures the handle to the motor shaft while underway.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace the factory trolling motor rope with the G-Force Handle?\u003c\/strong\u003e The G-Force Handle GFH-1G solves the common problem of cheap factory lift and release ropes and handles breaking, often at critical times such as tournaments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho endorses the G-Force Handle?\u003c\/strong\u003e The G-Force Handle GFH-1G is endorsed by B.A.S.S. Elite Pro Gerald \"G-Man\" Swindle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the GFH-1G left- or right-hand specific?\u003c\/strong\u003e No, the GFH-1G G-Force Handle is ambidextrous and works for either hand.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991263424731,"sku":"T-H-GFH-1G-DP","price":56.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/GFH-1R-DP_01.jpg?v=1784498564"},{"product_id":"t-h-marine-g-force-trolling-motor-replacement-handle-lift-release-cord-cushioned-grip-nylon-jacketed-stainless-cable-red-gfh-1r-fits-most-minn-kota-motorguide-garmin-trolling-motors","title":"T-H Marine GFH-1R G-Force Trolling Motor Replacement Handle and Cable, Red","description":"\u003cp\u003eThe T-H Marine GFH-1R G-Force Handle is a patented trolling motor replacement lift and release system built to solve the problem of the cheap lift and release ropes found on most trolling motors. It pairs a rugged, nylon jacketed stainless steel cable with a large, cushioned grip handle, giving anglers a durable no-stretch replacement for factory ropes that tend to fray or snap, often at the worst possible moment. The GFH-1R is endorsed by B.A.S.S. Elite Pro Gerald \"G-Man\" Swindle and is designed as the last lift and release handle you will need to buy.\u003c\/p\u003e\u003cp\u003eThe handle is finished in red and comes complete with a hook-and-loop strap so it can be secured to the motor shaft while underway, keeping it out of the way during operation. It fits most trolling motor models and makes. For a Garmin Force trolling motor, the GFH-1R works only when used with the motor's existing cable. It is not recommended for use on Minn-Kota Edge or MotorGuide Pro models. MotorGuide Xi5 owners will need the clamp-on version of the G-Force Handle (GFH-CA1R), which is a separate part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e GFH-1R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Material:\u003c\/strong\u003e Nylon, Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e Nylon Jacketed Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip:\u003c\/strong\u003e Cushioned Grip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 1.5 inches L x 6.5 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment:\u003c\/strong\u003e Hook-and-Loop Strap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits most trolling motor models and makes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trolling Motor Parts and Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat trolling motors does the T-H Marine GFH-1R fit?\u003c\/strong\u003e The GFH-1R G-Force Handle fits most trolling motor models and makes, though it is not recommended for use on Minn-Kota Edge or MotorGuide Pro models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the GFH-1R work with a Garmin Force trolling motor?\u003c\/strong\u003e Yes, but the GFH-1R only works with a Garmin Force trolling motor when used together with the motor's existing cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the GFH-1R work with a MotorGuide Xi5?\u003c\/strong\u003e No. The MotorGuide Xi5 requires the clamp-on G-Force Handle, part number GFH-CA1R, which is a separate part from the GFH-1R.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the GFH-1R recommended for a Minn-Kota Edge or MotorGuide Pro trolling motor?\u003c\/strong\u003e No, T-H Marine states the GFH-1R G-Force Handle is not recommended for use on Minn-Kota Edge or MotorGuide Pro models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the GFH-1R handle and cable made of?\u003c\/strong\u003e The GFH-1R uses a nylon jacketed stainless steel cable paired with a cushioned grip handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options does the GFH-1R come in?\u003c\/strong\u003e The GFH-1R G-Force Handle is finished in red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the GFH-1R handle?\u003c\/strong\u003e The GFH-1R measures 1.5 inches long by 6.5 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the GFH-1R weigh?\u003c\/strong\u003e The T-H Marine GFH-1R weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the GFH-1R secured to the trolling motor while underway?\u003c\/strong\u003e A hook-and-loop strap is included with the GFH-1R so the handle can be secured to the motor shaft while underway.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace a factory trolling motor rope with the GFH-1R?\u003c\/strong\u003e The GFH-1R was created to solve the problem of the cheap lift and release ropes that come standard on many trolling motors, replacing them with a rugged, no-stretch cable and cushioned handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho endorses the GFH-1R G-Force Handle?\u003c\/strong\u003e The GFH-1R is endorsed by B.A.S.S. Elite Pro Gerald \"G-Man\" Swindle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with the GFH-1R?\u003c\/strong\u003e The GFH-1R includes the cushioned grip handle, the nylon jacketed stainless steel cable, and a hook-and-loop strap for securing it to the motor shaft.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991263752411,"sku":"T-H-GFH-1R-DP","price":58.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/GFH-1R-DP_01_d7403d8c-0372-47c5-8acb-dd198d129822.jpg?v=1784498584"},{"product_id":"lewmar-50mm-synchro-block-single-990-lb-working-load-limit-traveler-compatible-29925001bk","title":"Lewmar 50mm Synchro Block Single, 990 lb Working Load Limit, Traveler Compatible - 29925001BK","description":"\u003cp\u003eThe Lewmar Synchro Block Single (29925001BK) is a 50mm single sheave block engineered for sailboat running rigging where efficiency and durability matter. It carries a 990 lb working load limit and accommodates lines from 1\/4 inch to 3\/8 inch in diameter, making it suited to halyard tuning, mainsheet systems, mast foot and head blocks, and boom vangs.\u003c\/p\u003e\u003cp\u003eThe block uses a high-density Free-Spin bearing that reduces axle diameter, cutting friction and delivering up to 40% more efficiency compared to budget blocks. A self-aligning head and optimized block geometry keep the line tracking smoothly under load, while the larger sheave diameter further minimizes rope friction for smoother power transfer and reduced rope wear. The cheeks are stiff, glass fiber reinforced material that resists line wedging, and the block includes a stainless steel strap for added strength and long service life.\u003c\/p\u003e\u003cp\u003eDesign is versatile: the block switches easily between swiveling and fixed shackle configurations, and its precision-engineered shackle post gives seamless compatibility with Lewmar traveler systems. This makes the Synchro Block Single 29925001BK a practical upgrade for sailors looking to improve sail handling response without switching to a full multi-block system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lewmar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 29925001BK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSheave Diameter:\u003c\/strong\u003e 50 millimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Load Limit:\u003c\/strong\u003e 990 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Diameter Accommodated:\u003c\/strong\u003e 1\/4 inch to 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Free-Spin bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheek Material:\u003c\/strong\u003e Glass fiber reinforced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShackle Configuration:\u003c\/strong\u003e Switchable between swiveling and fixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTraveler Compatibility:\u003c\/strong\u003e Compatible with Lewmar traveler systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Sailboat Blocks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the working load limit of the Lewmar Synchro Block Single 29925001BK?\u003c\/strong\u003e The Lewmar Synchro Block Single 29925001BK has a working load limit of 990 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat line sizes fit this block?\u003c\/strong\u003e The 29925001BK accommodates line diameters from 1\/4 inch to 3\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat sheave size does this block use?\u003c\/strong\u003e It uses a 50 millimeter sheave, which pairs with its Free-Spin bearing to reduce friction during operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the shackle be changed from swiveling to fixed?\u003c\/strong\u003e Yes, the Lewmar Synchro Block Single is designed to switch easily between swiveling and fixed shackle configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this block compatible with Lewmar traveler systems?\u003c\/strong\u003e Yes, the 29925001BK has a precision-engineered shackle post for seamless compatibility with Lewmar traveler systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the block's construction material?\u003c\/strong\u003e The cheeks are stiff, glass fiber reinforced material that resists lines wedging, and the block includes a stainless steel strap for added strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lewmar 29925001BK weigh?\u003c\/strong\u003e This block weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat sailing applications is this block used for?\u003c\/strong\u003e The Synchro Block Single is suited to halyard tuning, mainsheet systems, mast foot and head blocks, and boom vangs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this block reduce friction compared to standard blocks?\u003c\/strong\u003e The high-density Free-Spin bearing reduces axle diameter and, combined with optimized block geometry and a self-aligning head, delivers up to 40% more efficiency than budget blocks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the sheave diameter affect performance?\u003c\/strong\u003e Yes, the 50 millimeter sheave on the 29925001BK is sized larger to minimize rope friction and support smoother power transfer with reduced rope wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Lewmar Synchro Block Single a single or double sheave block?\u003c\/strong\u003e The 29925001BK is a single sheave block, as indicated by its Synchro Block Single designation.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":49025132331227,"sku":"LEW-29925001BK","price":27.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/LEW-29925001BK__27926.1722352939.500.750.jpg?v=1785329116"},{"product_id":"lewmar-60mm-htx-single-block-2422-lb-working-load-limit-part-29196001","title":"Lewmar 60mm HTX Single Block, 2422 lb Working Load Limit, Part 29196001","description":"\u003cp\u003eThe Lewmar 60mm HTX Single Block (part 29196001) is a high-load sailboat block engineered for sail handling and traveler systems on performance sailboats. Built around a 60 millimeter sheave, it carries a working load limit of 2,422 pounds, giving it the strength to handle heavily loaded sheets and control lines without hesitation. The block's side cheeks are constructed from aluminum, providing durability and long-term resistance to the stresses of repeated high-load cycles while keeping the block's overall weight manageable.\u003c\/p\u003e\u003cp\u003eInside, the block runs on a central plain bearing combined with Delrin side thrust ball bearings. This bearing arrangement is designed to keep friction low so sail trim adjustments stay smooth and responsive, even under significant line tension. The combination of a plain bearing for radial load and ball bearings for side thrust loading lets the block handle both straight-line pull and the lateral loading generated by traveler systems.\u003c\/p\u003e\u003cp\u003eThis single block is designed to work with Lewmar traveler systems, making it a compatible upgrade or replacement component within existing Lewmar rigging setups. It suits demanding sailing conditions where reliable, low-friction line control is required, and its aluminum construction is intended to reduce rope wear over the life of the block.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lewmar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 29196001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Sailboat Blocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSheave Outside Diameter:\u003c\/strong\u003e 60 millimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Load Limit:\u003c\/strong\u003e 2422 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum side cheeks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Central plain bearing with Delrin side thrust ball bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2.36 x 2.36 x 0.04 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Lubricant:\u003c\/strong\u003e Grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the working load limit of the Lewmar 29196001 block?\u003c\/strong\u003e The Lewmar 60mm HTX Single Block, part 29196001, carries a working load limit of 2422 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size sheave does this Lewmar HTX block use?\u003c\/strong\u003e It uses a 60 millimeter sheave, sized for the HTX single block line of Lewmar hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bearing system does the 29196001 block use?\u003c\/strong\u003e A central plain bearing handles the main radial load, paired with Delrin side thrust ball bearings that reduce friction under lateral loading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the block's housing made of?\u003c\/strong\u003e The side cheeks on the Lewmar 29196001 block are made of aluminum, chosen for durability under repeated high-load use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this block compatible with Lewmar traveler systems?\u003c\/strong\u003e Yes, the Lewmar 60mm HTX Single Block is designed to work with Lewmar traveler systems as part of an existing rigging setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lewmar 29196001 block weigh?\u003c\/strong\u003e This block weighs 0.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this block?\u003c\/strong\u003e The Lewmar HTX Single Block measures 2.36 x 2.36 x 0.04 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a single or double block?\u003c\/strong\u003e The 29196001 is a single block, meaning it has one sheave rather than two.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the block come with more than one sheave included?\u003c\/strong\u003e No, part 29196001 is sold as a single-sheave block with a unit count of one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat lubricant should be used to service this block?\u003c\/strong\u003e Grease is the compatible lubricant for maintaining the Lewmar 60mm HTX Single Block's bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of sailing use is this block designed for?\u003c\/strong\u003e The Lewmar 29196001 block is designed for high-load sail handling on performance sailboats, including demanding traveler and sheet control applications.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":49025132265691,"sku":"LEW-29196001","price":77.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/LEW-29196001__60797.1722509448.500.750.jpg?v=1785329117"},{"product_id":"lewmar-50mm-synchro-block-single-becket-990-lb-working-load-limit-1-4-3-8-inch-line","title":"Lewmar 50mm Synchro Block Single Becket, 990 lb Working Load Limit, 1\/4 - 3\/8 Inch Line","description":"\u003cp\u003eThe Lewmar 50mm Synchro Block Single Becket is a sailboat block built for efficient line handling on halyards, mainsheet systems, mast foot and head applications, and boom vangs. It uses a 50mm sheave with a 990 lb working load limit and accommodates line diameters from 1\/4 inch to 3\/8 inch, making it suited to a wide range of small to mid-size sailboat rigging setups.\u003c\/p\u003e\u003cp\u003eThe block's geometry and larger sheave diameter are engineered to minimize rope friction, while a high-density Free-Spin bearing reduces axle diameter to cut friction further and boost overall efficiency compared to standard budget blocks. A self-aligning head keeps the block synchronized with the rope's movement for smoother power transfer and reduced rope wear during use. The single becket design provides a fixed attachment point for tying off a line, useful in multi-part purchase systems.\u003c\/p\u003e\u003cp\u003eConstruction pairs stiff, glass fiber reinforced cheeks, which help prevent lines from wedging, with a stainless steel strap for added strength and long-term durability in a marine environment. The block allows an easy switch between swiveling and fixed shackle configurations, and its shackle post is designed for compatibility with Lewmar traveler systems. The complete unit includes one block with becket, ready to install on compatible sailboat hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lewmar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 29925004BK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 50mm Synchro Block Single Becket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSheave Diameter:\u003c\/strong\u003e 50mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Load Limit:\u003c\/strong\u003e 990 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Diameter Range:\u003c\/strong\u003e 1\/4 inch - 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e High-density Free-Spin bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBecket:\u003c\/strong\u003e Single becket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShackle Configuration:\u003c\/strong\u003e Switchable between swiveling and fixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheek Material:\u003c\/strong\u003e Glass fiber reinforced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Block\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5.75 x 2.56 x 1.38 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 743683203756\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat line diameter fits the Lewmar 29925004BK Synchro Block?\u003c\/strong\u003e The Lewmar 50mm Synchro Block Single Becket (29925004BK) accommodates line diameters from 1\/4 inch to 3\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the working load limit of this Lewmar block?\u003c\/strong\u003e The 29925004BK Synchro Block has a working load limit of 990 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this block have a becket?\u003c\/strong\u003e Yes, the Lewmar 29925004BK is a single becket version, providing a fixed tie-off point for a line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the shackle be switched between swiveling and fixed?\u003c\/strong\u003e Yes, the Lewmar Synchro Block 29925004BK allows an easy switch between swiveling and fixed shackle configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the sheave diameter on the 29925004BK block?\u003c\/strong\u003e The sheave diameter is 50mm on this Lewmar Synchro Block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials is the Lewmar Synchro Block made from?\u003c\/strong\u003e Glass fiber reinforced cheeks are paired with a stainless steel strap on the 29925004BK, combining stiffness at the cheeks with added strength from the steel strap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this block compatible with Lewmar traveler systems?\u003c\/strong\u003e Yes, the 29925004BK shackle post is designed for compatibility with Lewmar traveler systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat sailing applications is this block suited for?\u003c\/strong\u003e Halyard tuning, mainsheet systems, mast foot and head blocks, and boom vangs are typical applications for the Lewmar 50mm Synchro Block Single Becket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Free-Spin bearing improve performance?\u003c\/strong\u003e The high-density Free-Spin bearing in the 29925004BK reduces axle diameter, which lowers friction and improves efficiency compared to standard budget blocks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 29925004BK?\u003c\/strong\u003e One Lewmar 50mm Synchro Block Single Becket is included, ready to mount to compatible sailboat hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lewmar 29925004BK block weigh?\u003c\/strong\u003e The Lewmar 29925004BK Synchro Block weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do the block cheeks matter for line handling?\u003c\/strong\u003e The glass fiber reinforced cheeks on the 29925004BK are stiff enough to help prevent lines from wedging between the sheave and cheek during use.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":49025132527835,"sku":"LEW-29925004BK","price":31.78,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/LEW-29925004BK__80924.1722376448.500.750.jpg?v=1785329116"},{"product_id":"shurhold-stainless-steel-fishing-gaff-hook-1804-4-inch-shur-lok-handle-compatible","title":"Shurhold Stainless Steel Fishing Gaff Hook 1804, 4 Inch, SHUR-LOK Handle Compatible","description":"\u003cp\u003eThe Shurhold 1804 is a stainless steel fishing gaff hook built for the moment a fish is boatside and it's time to land it. Cast from a single piece of stainless steel, the hook measures 4 inches (10 cm) and is designed for the strength and rigidity anglers need to secure a confident landing without bending or flexing under load. One-piece construction also means there is no separate shaft-to-hook joint that can loosen or fail over time.\u003c\/p\u003e\u003cp\u003eA safety spring guard is included to cover the sharp point whenever the gaff is not in use, making it safer to store aboard or stow in a rod locker between trips. The 1804 gaff hook is designed to snap into any Shurhold SHUR-LOK handle, so a single handle can be shared across the gaff hook and other Shurhold fishing attachments such as the Landing Net and Crab Net. The SHUR-LOK handle itself is sold separately.\u003c\/p\u003e\u003cp\u003eStainless steel construction gives the gaff hook resistance to corrosion from saltwater exposure, an important trait for hardware that spends its life on deck or in a rocket launcher. At 0.6 pounds, it is light enough to keep rigged and ready without adding noticeable weight to a handle system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurhold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1804\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Fishing Attachments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGaff Hook Length:\u003c\/strong\u003e 4 inches (10 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 12 x 12 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 703485318041\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Compatibility:\u003c\/strong\u003e Fits all Shurhold SHUR-LOK handles (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety Feature:\u003c\/strong\u003e Spring guard for safe storage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the hook on the Shurhold Fishing Gaff, part 1804?\u003c\/strong\u003e The gaff hook measures 4 inches (10 cm), cast from a single piece of stainless steel for a rigid, corrosion-resistant point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat handle does the Shurhold 1804 gaff hook attach to?\u003c\/strong\u003e It snaps into any Shurhold SHUR-LOK handle, which is sold separately and lets the same handle carry other Shurhold attachments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Shurhold 1804 gaff hook made of stainless steel?\u003c\/strong\u003e Yes, it is cast from one piece of stainless steel, giving the hook strength and durability for landing fish boatside.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the gaff come with a safety cover for the point?\u003c\/strong\u003e A safety spring guard is included with the 1804 gaff hook to shield the sharp point when it is stored or not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the Shurhold 1804 gaff hook?\u003c\/strong\u003e The package includes the stainless steel gaff hook with its safety spring guard; the SHUR-LOK handle is sold separately and must be purchased on its own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Shurhold 1804 gaff hook share a handle with a Landing Net or Crab Net?\u003c\/strong\u003e Yes, all Shurhold fishing attachments, including the 1804 gaff hook, the Landing Net, and the Crab Net, use the same SHUR-LOK connection and fit any Shurhold handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Shurhold Fishing Gaff Hook weigh?\u003c\/strong\u003e The 1804 gaff hook weighs 0.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Shurhold gaff hook one piece or does it have removable parts?\u003c\/strong\u003e It is a one-piece stainless steel construction, so there is no separate hook or shaft that can loosen or come apart over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Shurhold 1804 gaff hook?\u003c\/strong\u003e The UPC for the Shurhold 1804 gaff hook is 703485318041.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Shurhold gaff hook hold up to repeated saltwater use?\u003c\/strong\u003e Being cast from stainless steel, the 1804 gaff hook resists corrosion from saltwater exposure better than plated or coated steel hooks.\u003c\/p\u003e","brand":"Shurhold","offers":[{"title":"Default Title","offer_id":49026424242395,"sku":"SUR-1804","price":67.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/1804-2_10.jpg?v=1785025837"},{"product_id":"davis-instruments-deluxe-rigging-knife-stainless-steel-marine-knife-with-marlin-spike-and-shackle-key","title":"Davis Instruments Deluxe Rigging Knife, Stainless Steel Marine Knife with Marlin Spike and Shackle Key","description":"\u003cp\u003eThe Davis Instruments Deluxe Rigging Knife is a stainless steel marine multi-tool built to cut heavy dock lines and rope aboard any boat. Its dura-edged blade folds into a compact footprint for storage, while a built-in spring keeps the blade from closing on its own during use even though it is not a locking blade. The knife includes a marlin spike, which does lock open, for tying knots, splicing rope ends, opening the strands of rope when forming an eye, and prying open knots that have tightened with use. A shackle key is built in for unscrewing threaded shackles and turning deck plates, and a flathead screwdriver rounds out the tool set for general jobs on deck.\u003c\/p\u003e\u003cp\u003eA lanyard loop lets you secure the knife at a line station so it is always within reach, which is why many boats keep one lanyarded at each station. Folded, the Deluxe Rigging Knife measures 6 x 4.5 x 0.5 inches and weighs 0.28 pounds, making it easy to carry in a pocket, tool bag, or ditch kit. Because the tool is stainless steel rather than fully saltwater-proof, periodic lubricating oil helps prevent corrosion with continued marine use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Davis Instruments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1551\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Deluxe Rigging Knife\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Type:\u003c\/strong\u003e Dura-edged blade, non-locking with spring-retained hold-open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Tools:\u003c\/strong\u003e Marlin spike (locks open), shackle key, screwdriver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment:\u003c\/strong\u003e Lanyard loop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFolded Dimensions:\u003c\/strong\u003e 6 x 4.5 x 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 011698155101\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Davis Instruments Deluxe Rigging Knife used for?\u003c\/strong\u003e The Deluxe Rigging Knife is used to cut heavy dock lines and rope, and is often called a rescue knife because it is considered essential emergency gear aboard a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Deluxe Rigging Knife have a locking blade?\u003c\/strong\u003e No, the main blade of the 1551 Deluxe Rigging Knife does not lock, but a built-in spring keeps the blade from folding closed during use. The marlin spike, however, does lock open.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tools are included with the rigging knife?\u003c\/strong\u003e The Deluxe Rigging Knife includes a marlin spike, a shackle key, and a flathead screwdriver, in addition to the dura-edged main blade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the marlin spike on this knife used for?\u003c\/strong\u003e The marlin spike on the 1551 is used to tie knots, splice rope ends together, open the strands of rope when forming an eye, sew, and pry open knots that have tightened with use. It can also act as a lever to help tighten a marlin spike hitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the shackle key used for?\u003c\/strong\u003e The shackle key built into the Deluxe Rigging Knife is used to unscrew threaded shackles and to turn deck plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Deluxe Rigging Knife made of?\u003c\/strong\u003e The Deluxe Rigging Knife (part number 1551) is made entirely of stainless steel with dura-edged blades.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is the Deluxe Rigging Knife and how much does it weigh?\u003c\/strong\u003e Folded, the Deluxe Rigging Knife measures 6 x 4.5 x 0.5 inches and weighs 0.28 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I attach the rigging knife so I don't lose it?\u003c\/strong\u003e The 1551 Deluxe Rigging Knife has a lanyard loop so it can be secured at a line station or clipped to a person, which is why many boats lanyard one to every line station.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the rigging knife rust or corrode?\u003c\/strong\u003e Even though the Deluxe Rigging Knife is made of stainless steel, it can still be damaged by exposure to saltwater, so it should be coated with lubricating oil a few times a year.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Deluxe Rigging Knife be used for anything besides boating?\u003c\/strong\u003e Yes, the 1551 rigging knife is useful for any job involving heavy rope, such as installing guide wires on a weather station pole or agricultural work that requires splicing rope and tying knots.\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":49026457764059,"sku":"DAV-1551","price":25.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/01551_01.jpg?v=1785026823"},{"product_id":"bobs-machine-big-d-trolling-motor-handle-fits-minn-kota-motorguide","title":"Bob's Machine Big D Trolling Motor Handle - Fits Minn Kota \u0026 MotorGuide","description":"\u003cp\u003eThe Bob's Machine Big D Trolling Motor Handle is a replacement steering handle built for comfort, functionality, and reliability on most Minn Kota and MotorGuide trolling motors. Its large D-shaped design fits your whole hand rather than just your fingertips, giving you a more secure, fatigue-free grip when steering and adjusting your trolling motor throughout the day on the water.\u003c\/p\u003e\u003cp\u003eThe handle's stainless steel core is vinyl coated for a comfortable feel and long-term corrosion resistance in a marine environment. Unlike handles that rely on a separate cable connection point that can pull loose over time, the Big D Trolling Motor Handle has its steering cable molded directly into the handle body, so the cable will not break out with normal use. A stainless steel cable clamp is included so the cable can be properly secured once installed.\u003c\/p\u003e\u003cp\u003eBecause it works with most Minn Kota and MotorGuide trolling motors, this handle is a straightforward upgrade or replacement for anglers whose factory handle has cracked, worn out, or become uncomfortable to use for long periods.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 315-200000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Shape:\u003c\/strong\u003e D-Shaped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Attachment:\u003c\/strong\u003e Molded directly into handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Clamp:\u003c\/strong\u003e Stainless steel, included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works with most Minn Kota and MotorGuide trolling motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377010269\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eWorks with most Minn Kota and MotorGuide trolling motors.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat trolling motors does the Bob's Machine Big D Trolling Motor Handle fit?\u003c\/strong\u003e This handle works with most Minn Kota and MotorGuide trolling motors, making it a common replacement across both brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the handle made of?\u003c\/strong\u003e The Big D Trolling Motor Handle has a stainless steel core with a vinyl coating for a comfortable, corrosion-resistant grip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is it called the 'Big D' handle?\u003c\/strong\u003e It uses a large D-shaped design so your whole hand can wrap around the handle instead of gripping with just your fingertips.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the cable pull out of the handle over time?\u003c\/strong\u003e No. On the 315-200000 handle, the steering cable is molded directly into the handle body rather than attached separately, so it will not break out with normal use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the handle come with a cable clamp?\u003c\/strong\u003e Yes, a stainless steel cable clamp is included with the Big D Trolling Motor Handle for securing the cable once it is installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Big D Trolling Motor Handle?\u003c\/strong\u003e It is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a direct replacement for a factory Minn Kota or MotorGuide handle?\u003c\/strong\u003e Yes, the Bob's Machine 315-200000 is designed to work with most Minn Kota and MotorGuide trolling motors as a replacement handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the handle weigh?\u003c\/strong\u003e The Big D Trolling Motor Handle weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes this trolling motor handle?\u003c\/strong\u003e It is made by Bob's Machine, part number 315-200000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the handle designed for large hands?\u003c\/strong\u003e Yes, the D-shaped design is specifically sized to be gripped comfortably with your whole hand, including larger hands.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027466297563,"sku":"BOB-315-200000","price":34.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/315-200000__72454.1722480542.500.750.jpg?v=1785163493"},{"product_id":"tigress-88605-ultimate-rigging-kit-for-double-outrigger-rigging-up-to-22-feet","title":"Tigress 88605 Ultimate Rigging Kit for Double Outrigger Rigging Up to 22 Feet","description":"\u003cp\u003eThe Tigress Ultimate Rigging Kit (88605) is a complete double-rigging outfit built for anglers running outriggers up to 22 feet, the kind of setup used for big-game and kite fishing targets such as shark, wahoo, mahi mahi, tuna, and sailfish. Instead of sourcing release clips, stops, snubbers, and line separately, this kit bundles everything needed to rig a pair of outriggers in one box, ready to install.\u003c\/p\u003e\u003cp\u003eInside the kit are 2 pairs of EZ release clips for quick, reliable line release when a fish strikes, 2 pairs of 1-3\/4 inch cork stops to set line position along the halyard, a pair of double swivel snubbers to absorb shock and reduce line twist, a pair of eye straps with mounting screws, 8 leader snaps for quick tackle changes, and 200 feet of black nylon braid to serve as the outrigger halyard line. The braid and hardware are sized for double rigging, meaning both outriggers on the boat can be fully rigged from this single kit.\u003c\/p\u003e\u003cp\u003eEverything is made from durable nylon components designed to hold up to saltwater use and the repeated stress of release-and-reset fishing. Because the kit is complete and ready to install, it suits anglers rigging a new pair of outriggers or replacing worn-out clips, snubbers, and line on an existing setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tigress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 88605\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Ultimate Rigging Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigger Length Capacity:\u003c\/strong\u003e Up to 22 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigging Type:\u003c\/strong\u003e Double rigging (rigs a pair of outriggers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBraid Line Length:\u003c\/strong\u003e 200 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBraid Line Material:\u003c\/strong\u003e Black nylon braid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEZ Release Clips Included:\u003c\/strong\u003e 2 pairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCork Stops Included:\u003c\/strong\u003e 2 pairs, 1-3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble Swivel Snubbers Included:\u003c\/strong\u003e 1 pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye Straps Included:\u003c\/strong\u003e 1 pair, with mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeader Snaps Included:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 661033886056\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDesigned for double rigging a pair of outriggers up to 22 feet in length\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Tigress 88605 Ultimate Rigging Kit include?\u003c\/strong\u003e The kit includes 2 pairs of EZ release clips, 2 pairs of 1-3\/4 inch cork stops, a pair of double swivel snubbers, a pair of eye straps with mounting screws, 8 leader snaps, and 200 feet of black nylon braid, everything needed to double rig a pair of outriggers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long of outriggers does the Tigress Ultimate Rigging Kit work with?\u003c\/strong\u003e This kit is built for double rigging outriggers up to 22 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Tigress 88605 kit enough to rig two outriggers or just one?\u003c\/strong\u003e It is a double rigging kit, meaning the included hardware and 200 feet of braid are enough to rig a pair of outriggers, not just a single pole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the components made from?\u003c\/strong\u003e The Tigress Ultimate Rigging Kit components, including the clips and hardware, are made from nylon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the purpose of the double swivel snubbers in this kit?\u003c\/strong\u003e The pair of double swivel snubbers included in the 88605 kit absorb shock and reduce line twist during outrigger fishing, helping protect the line and hardware from sudden loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the cork stops included in the kit?\u003c\/strong\u003e The two pairs of cork stops included with the Tigress 88605 kit measure 1-3\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Tigress Ultimate Rigging Kit come with mounting hardware?\u003c\/strong\u003e Yes, the kit includes a pair of eye straps along with mounting screws for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many leader snaps come with the Tigress 88605 kit?\u003c\/strong\u003e The kit includes 8 leader snaps for attaching and swapping leaders quickly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of fishing is the Tigress Ultimate Rigging Kit designed for?\u003c\/strong\u003e This rigging kit is intended for big-game and kite fishing applications such as shark, wahoo, mahi mahi, tuna, and sailfish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the braid line included with the kit?\u003c\/strong\u003e The Tigress 88605 kit includes 200 feet of black nylon braid to serve as the outrigger halyard line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Tigress Ultimate Rigging Kit?\u003c\/strong\u003e The kit's components, including the nylon braid, are black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Tigress 88605 Ultimate Rigging Kit weigh?\u003c\/strong\u003e The Tigress Ultimate Rigging Kit weighs 1.3 pounds.\u003c\/p\u003e","brand":"Tigress","offers":[{"title":"Default Title","offer_id":49028240998619,"sku":"TIG-88605","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/TIG-88605__35430.1722512851.500.750.jpg?v=1785165581"},{"product_id":"taco-marine-gunnel-mount-striker-base-for-1-1-8-inch-outriggers-f16-0212-f-stainless-steel-pair","title":"TACO Marine Gunnel-Mount Striker Base for 1-1\/8 Inch Outriggers, F16-0212-F, Stainless Steel Pair","description":"\u003cp\u003eThe TACO Marine F16-0212-F Gunnel-Mount Striker Base is a stainless steel outrigger mounting system built for anglers who want to run outriggers without a T-top. Instead of overhead rigging, this system mounts directly to the boat's gunnel, giving offshore trollers a simple, adjustable way to spread lines from the safety and easy reach of the gunnel rather than climbing to a hardtop. It is designed for 1-1\/8 inch diameter outrigger poles and carries a 45-degree arm that is ambidextrous, so the same base works on either side of the boat.\u003c\/p\u003e\u003cp\u003eConstruction is polished Type-316L stainless steel for corrosion resistance in a saltwater environment, with a silver polished finish that keeps a clean, low-profile look on the gunnel. The mounting footprint is compact, keeping visual impact and installation expense to a minimum compared to a full T-top outrigger setup. Note that the arm does not lock into the mount, so it is intended for use at trolling speeds only; outriggers should be returned to the vertical position before running at speed.\u003c\/p\u003e\u003cp\u003eThis listing is for the Gunnel-Mount Striker Base sold as a pair, so both port and starboard mounting positions are covered in a single purchase. TACO Marine backs the base with a three-year limited warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e TACO Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e F16-0212-F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel Type 316L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutrigger Pole Diameter:\u003c\/strong\u003e 1-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArm Angle:\u003c\/strong\u003e 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Gunnel mount, ambidextrous (fits either side)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 17.25 x 16.25 x 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.27 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold in pairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Three-year limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 630838009892\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits 1-1\/8 inch diameter outrigger poles\u003c\/li\u003e\n\u003cli\u003eAmbidextrous 45-degree arm mounts to either the port or starboard gunnel\u003c\/li\u003e\n\u003cli\u003eIntended for trolling speeds; outriggers should be vertical before the boat reaches running speed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size outriggers does the TACO Marine F16-0212-F fit?\u003c\/strong\u003e The F16-0212-F Gunnel-Mount Striker Base is sized for 1-1\/8 inch diameter outrigger poles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this mount work on both the port and starboard side?\u003c\/strong\u003e Yes, the F16-0212-F arm is ambidextrous with a 45-degree angle, so the same base mounts on either the port or starboard gunnel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounts come in this purchase?\u003c\/strong\u003e The F16-0212-F Gunnel-Mount Striker Base is sold in pairs, covering both gunnel positions in one order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the F16-0212-F made from?\u003c\/strong\u003e It is built from polished Type-316L stainless steel, chosen for corrosion resistance in saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I run outriggers at full speed with this mount installed?\u003c\/strong\u003e No. The F16-0212-F arm does not lock into the mount, so it is intended for trolling speeds only; outriggers should be placed in the vertical position when the boat is running.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the F16-0212-F Gunnel-Mount Striker Base weigh?\u003c\/strong\u003e The pair weighs 6.27 pounds total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this outrigger mount?\u003c\/strong\u003e The F16-0212-F measures 17.25 x 16.25 x 4.5 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from a T-top outrigger mount?\u003c\/strong\u003e The F16-0212-F mounts to the boat's gunnel rather than a T-top or hardtop, giving a simpler, lower-cost installation with minimal visual impact on the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the F16-0212-F have?\u003c\/strong\u003e It has a polished silver stainless steel finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the F16-0212-F genuine TACO Marine, and does it carry a warranty?\u003c\/strong\u003e Yes, the F16-0212-F is a genuine TACO Marine product and is backed by a three-year limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the F16-0212-F?\u003c\/strong\u003e The order includes the pair of TACO Marine F16-0212-F Gunnel-Mount Striker Bases with the 45-degree ambidextrous arms.\u003c\/p\u003e","brand":"Taco Marine","offers":[{"title":"Default Title","offer_id":49031444431067,"sku":"TAC-F16-0212-F","price":338.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41beoM9PsSL.jpg?v=1785214207"},{"product_id":"taco-marine-outrigger-line-caddy-f40-0030bka-1-clamp-on-for-1-1-8-inch-and-1-1-2-inch-poles","title":"Taco Marine Outrigger Line Caddy F40-0030BKA-1, Clamp-On for 1-1\/8 Inch and 1-1\/2 Inch Poles","description":"\u003cp\u003eThe Taco Marine Outrigger Line Caddy (F40-0030BKA-1) gives anglers a simple way to keep outrigger line organized and tangle-free while the outriggers are rigged and retracted. Instead of letting excess line hang loose or bunch up on deck, the caddy clamps directly onto the outrigger pole at whatever distance the angler prefers, and the line wraps neatly around the caddy's ears for storage until it is needed again.\u003c\/p\u003e\u003cp\u003eInstallation is clamp-on, so no drilling or permanent modification to the outrigger pole is required. The caddy is built from durable black nylon with a black rubber reducer bushing that lets it seat securely on the pole, and it is secured with a number 10 stainless steel screw and hex nut for a tight, corrosion-resistant hold in the marine environment. It is designed to fit 1-1\/8 inch and 1-1\/2 inch diameter outrigger poles, covering the sizing used on 8 foot, 12 foot, 15 foot, and 18 foot outriggers, and is sold in pairs so both outriggers on the boat can be equipped.\u003c\/p\u003e\u003cp\u003eCompact and low-profile, the caddy does not add bulk to the outrigger while keeping the cockpit and rigging area free of loose, tangled line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taco Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e F40-0030BKA-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Pole Diameters:\u003c\/strong\u003e 1-1\/8 inch and 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Outrigger Lengths:\u003c\/strong\u003e 8 feet, 12 feet, 15 feet, 18 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon, rubber, stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Clamp mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Number 10 stainless steel screw and hex nut, black rubber reducer bushing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair (2 count)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.26 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 630838026974\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taco Marine Outrigger Line Caddy used for?\u003c\/strong\u003e The Taco Marine Outrigger Line Caddy (F40-0030BKA-1) keeps excess outrigger line organized and tangle-free by letting anglers wrap the line around the caddy's ears while the outrigger is rigged and retracted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outrigger pole sizes does F40-0030BKA-1 fit?\u003c\/strong\u003e It fits 1-1\/8 inch and 1-1\/2 inch diameter outrigger poles, which covers the pole sizing used on 8 foot, 12 foot, 15 foot, and 18 foot outriggers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the line caddy installed?\u003c\/strong\u003e The Outrigger Line Caddy clamps directly onto the outrigger pole at the desired distance, so no drilling or permanent modification to the pole is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the caddy made of?\u003c\/strong\u003e F40-0030BKA-1 is made of durable black nylon with a black rubber reducer bushing and is secured with a number 10 stainless steel screw and hex nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Taco Marine Outrigger Line Caddy?\u003c\/strong\u003e This part number, F40-0030BKA-1, is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many caddies come in a package?\u003c\/strong\u003e The Outrigger Line Caddy is sold in pairs, so one package equips both outriggers on the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Outrigger Line Caddy weigh?\u003c\/strong\u003e F40-0030BKA-1 weighs 0.26 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is included with the caddy?\u003c\/strong\u003e Each Taco Marine Outrigger Line Caddy includes a number 10 stainless steel screw and hex nut along with a black rubber reducer bushing for mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this caddy hold up in saltwater conditions?\u003c\/strong\u003e Yes, the nylon body and stainless steel mounting hardware on F40-0030BKA-1 are built to withstand the marine environment, including saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Outrigger Line Caddy require tools to install?\u003c\/strong\u003e Only a screwdriver or wrench for the included number 10 stainless steel screw and hex nut is needed to clamp F40-0030BKA-1 onto the outrigger pole.\u003c\/p\u003e","brand":"Taco Marine","offers":[{"title":"Default Title","offer_id":49031445774555,"sku":"TAC-F40-0030BKA-1","price":42.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51eC1wqRTxL.jpg?v=1785214216"},{"product_id":"taco-marine-gs-280-grand-slam-280-outrigger-top-mount-sold-in-pairs-fits-1-1-2-inch-tele-outrigger-poles","title":"TACO Marine GS-280 Grand Slam 280 Outrigger Top Mount, Sold in Pairs, Fits 1-1\/2 Inch Tele-Outrigger Poles","description":"\u003cp\u003eThe TACO Marine GS-280 Grand Slam 280 Outrigger Top Mount is a top-mounted outrigger base built for anglers who run telescoping outrigger poles from a hardtop or T-top. Sold in pairs, the GS-280 gives you a matched port and starboard set from a single purchase, so both sides of the boat are covered with the same mount. Construction combines cast stainless-steel and machined aluminum components for a base that stands up to saltwater exposure and the repeated leverage of outrigger poles under trolling load. The mount features a strong, locking head design that allows the pole to be positioned and held firmly in place, along with horizontal rotation so the outrigger can be swung out from under the T-top when deploying and stowed back in when not in use.\u003c\/p\u003e\u003cp\u003eThe GS-280 is built to work with 1-1\/2 inch Tele-Outrigger poles. It also accepts 1-1\/8 inch Tele-Outrigger poles when a GSC-0025 Base Reducer is added, giving boat owners flexibility if they are running a smaller-diameter pole. The GS-280 mount is also available as part of outrigger mounting kits alongside the GS-170 mount. This is a top-mount style base, finished in silver, and is intended for anglers upgrading or replacing outrigger hardware on center consoles and other T-top-equipped boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e TACO Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e GS-280\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Grand Slam 280 Outrigger Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Top Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair (2 mounts)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast stainless-steel Type-316L and machined aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 25 x 6 x 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Compatibility:\u003c\/strong\u003e 1-1\/2 inch Tele-Outrigger Poles; 1-1\/8 inch Tele-Outrigger Poles with GSC-0025 Base Reducer (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotation:\u003c\/strong\u003e Horizontal rotation under the T-top\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 630838082703\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-1\/2 inch Tele-Outrigger Poles\u003c\/li\u003e\n\u003cli\u003e1-1\/8 inch Tele-Outrigger Poles (requires GSC-0025 Base Reducer, sold separately)\u003c\/li\u003e\n\u003cli\u003eAlso used in outrigger mounting kits with the GS-170 mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat poles does the TACO Marine GS-280 outrigger mount fit?\u003c\/strong\u003e The GS-280 is built for 1-1\/2 inch Tele-Outrigger poles, and it also works with 1-1\/8 inch Tele-Outrigger poles when a GSC-0025 Base Reducer is added.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the GS-280 come as a single mount or a pair?\u003c\/strong\u003e The GS-280 Grand Slam 280 Outrigger Mount is sold in pairs, giving you a matched port and starboard set in one purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the GS-280 mount made of?\u003c\/strong\u003e It is built from cast stainless-steel and machined aluminum, materials chosen for durability in a saltwater fishing environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the outrigger rotate once it is mounted?\u003c\/strong\u003e Yes, the GS-280 allows horizontal rotation, so the outrigger pole can be swung out from under the T-top when fishing and stowed back when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a pair of GS-280 mounts weigh?\u003c\/strong\u003e A pair of TACO Marine GS-280 outrigger mounts weighs 28 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the GS-280 mount?\u003c\/strong\u003e The GS-280 outrigger mount measures 25 x 6 x 20 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the GS-280 a top mount or a base mount?\u003c\/strong\u003e The GS-280 is a top-mount style outrigger base, designed to attach to a hardtop or T-top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to buy the GSC-0025 Base Reducer separately?\u003c\/strong\u003e Yes, the GSC-0025 Base Reducer is sold separately and is only needed if you are running 1-1\/8 inch Tele-Outrigger poles instead of the standard 1-1\/2 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the GS-280 lock the outrigger pole in position?\u003c\/strong\u003e Yes, the GS-280 features a strong, locking head that holds the outrigger pole in position once placed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the GS-280 available as part of a mounting kit?\u003c\/strong\u003e Yes, the GS-280 mount is also offered as part of outrigger mounting kits alongside the GS-170 mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the GS-280 outrigger mount?\u003c\/strong\u003e The TACO Marine GS-280 has a silver finish.\u003c\/p\u003e","brand":"Taco Marine","offers":[{"title":"Default Title","offer_id":49031446266075,"sku":"TAC-GS-280","price":2134.06,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41I6bdMTGGL.jpg?v=1785214219"},{"product_id":"taco-marine-grand-slam-170-outrigger-top-mounts-1-1-8-inch-diameter-pair","title":"Taco Marine Grand Slam 170 Outrigger Top Mounts, 1-1\/8 Inch Diameter, Pair","description":"\u003cp\u003eThe Taco Marine Grand Slam 170 Outrigger Top Mounts (GS-170) are a pair of stainless steel top mounts built to secure and adjust standard 1-1\/8 inch butt OD outriggers on boats up to 24 feet. At the heart of the design is Taco's Spline Lock Technology (U.S. Patent 8,186,095), an engineered mechanism that provides multiple adjustment positions while preventing slippage, holding the outrigger firmly at the desired height and laydown position. A Twist-n-Lock rotator collar locks into 12 distinct fishing positions with a simple quarter turn, and internal Delrin bearings keep every adjustment smooth while resisting movement once locked in place.\u003c\/p\u003e\u003cp\u003eEach mount uses a rugged, sure-grip knob to adjust and lock the height and laydown angle, which is useful for safe trailering and clearing bridges without disassembling the rigging. The stainless steel arm and locking feature keep the outrigger securely positioned during trolling and deployment, and the corrosion-resistant stainless construction is built for saltwater and freshwater marine environments. The GS-170 is designed for standard 1-1\/8 inch butt OD outriggers and is sold as a pair; a single top mount is available separately under a different part number for anglers who only need to replace one side.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taco Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e GS-170\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Grand Slam 170\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair (a single top mount is sold separately as GS-170-2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Outrigger Diameter:\u003c\/strong\u003e 1-1\/8 inch butt OD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Size:\u003c\/strong\u003e Up to 24 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Positions:\u003c\/strong\u003e 12 fishing positions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Twist-n-Lock rotator collar with Spline Lock Technology\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearings:\u003c\/strong\u003e Delrin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\/Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatent:\u003c\/strong\u003e US Patent 8,186,095\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 7 inches H x 9 inches W x 19 inches L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 630838081317\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3-year\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outrigger diameter does the Taco GS-170 top mount fit?\u003c\/strong\u003e The Grand Slam 170 (GS-170) top mount is designed for standard 1-1\/8 inch butt OD outriggers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat size is the Grand Slam 170 outrigger top mount rated for?\u003c\/strong\u003e Taco recommends the Grand Slam 170 (GS-170) for boats up to 24 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the GS-170 come as a single mount or a pair?\u003c\/strong\u003e GS-170 is sold as a pair of top mounts; a single top mount is available separately under the part number GS-170-2 for anglers who only need one side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many adjustment or fishing positions does the Grand Slam 170 offer?\u003c\/strong\u003e The Twist-n-Lock rotator collar on the Grand Slam 170 locks into 12 distinct fishing positions with a quarter turn.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is Spline Lock Technology on the Taco Grand Slam 170?\u003c\/strong\u003e Spline Lock Technology (U.S. Patent 8,186,095) is Taco's engineered locking mechanism that allows multiple adjustment positions while preventing slippage, holding the outrigger securely at the chosen height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Grand Slam 170 top mount made from?\u003c\/strong\u003e The GS-170 arm is stainless steel with Delrin internal bearings, finished in black and silver for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I adjust the outrigger height and angle for trailering with this mount?\u003c\/strong\u003e Yes, the GS-170's sure-grip knob adjusts and locks the height and laydown position, which allows the outrigger to be lowered for safe trailering or clearing bridges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Grand Slam 170 top mount pair weigh?\u003c\/strong\u003e The GS-170 pair weighs 12.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the GS-170?\u003c\/strong\u003e Ordering GS-170 includes a pair (two) of Grand Slam 170 outrigger top mounts; a single unit is the separate GS-170-2 part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Grand Slam 170 top mount genuine Taco Marine?\u003c\/strong\u003e Yes, the GS-170 is a genuine Taco Marine Grand Slam 170 top mount, not a generic aftermarket part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Grand Slam 170 top mount?\u003c\/strong\u003e The Grand Slam 170 (GS-170) top mount is backed by a 3-year warranty.\u003c\/p\u003e","brand":"Taco Marine","offers":[{"title":"Default Title","offer_id":49031446298843,"sku":"TAC-GS-170","price":1215.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51xabVRsEnL.jpg?v=1785214219"},{"product_id":"taco-marine-ot-0542vel15-hd-aluminum-tele-outrigger-pole-1-1-2-inch-x-15-foot-silver-with-silver-ring","title":"Taco Marine OT-0542VEL15-HD Aluminum Tele-Outrigger Pole, 1-1\/2 Inch x 15 Foot, Silver with Silver Ring","description":"\u003cp\u003eThe Taco Marine OT-0542VEL15-HD is a heavy-duty aluminum tele-outrigger pole built for offshore trolling, extending to 15 feet with a 1-1\/2 inch butt diameter. Constructed from aluminum, this pole is designed to hold outrigger lines away from the boat to spread multiple trolling baits and reduce line tangling while fishing. It is finished in silver and is fitted with a silver outrigger ring for running your outrigger line clip. As the HD (Heavy Duty) version of Taco Marine's tele-outrigger line, this pole is built to stand up to the loads and repeated telescoping\/collapsing use that offshore trolling demands.\u003c\/p\u003e\u003cp\u003eCollapsed, the pole measures 75 x 8.5 x 5 inches, making it manageable to stow aboard when not deployed. The pole weighs 15 pounds. It ships as a single OT-0542VEL15-HD unit with its silver ring.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taco Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e OT-0542VEL15-HD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Telescoping Outrigger Pole (Heavy Duty)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver with Silver Ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Length:\u003c\/strong\u003e 15 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollapsed Dimensions (L x W x H):\u003c\/strong\u003e 75 x 8.5 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 pole\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Taco Marine OT-0542VEL15-HD outrigger pole?\u003c\/strong\u003e The OT-0542VEL15-HD extends to 15 feet in length with a 1-1\/2 inch diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this outrigger pole made from?\u003c\/strong\u003e It is made from aluminum, which is the standard lightweight, corrosion-resistant material used for offshore outrigger poles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the OT-0542VEL15-HD?\u003c\/strong\u003e The pole is finished in silver and comes fitted with a matching silver outrigger ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pole telescope for storage?\u003c\/strong\u003e Yes, the OT-0542VEL15-HD is a telescoping (tele-outrigger) pole that collapses down for stowage and extends to its full 15-foot length for use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the collapsed dimensions of this outrigger pole?\u003c\/strong\u003e Collapsed for storage, the OT-0542VEL15-HD measures 75 x 8.5 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the OT-0542VEL15-HD weigh?\u003c\/strong\u003e This outrigger pole weighs 15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does HD mean in the OT-0542VEL15-HD name?\u003c\/strong\u003e HD indicates this is the Heavy Duty version of Taco Marine's tele-outrigger pole line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this outrigger pole?\u003c\/strong\u003e You receive one OT-0542VEL15-HD aluminum tele-outrigger pole with its silver outrigger ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the OT-0542VEL15-HD pole diameter compatible with standard outrigger ring mounts?\u003c\/strong\u003e The pole has a 1-1\/2 inch diameter, which is the size to match against your outrigger base or ring mount hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pole intended for offshore trolling?\u003c\/strong\u003e Yes, this aluminum tele-outrigger pole is designed to hold trolling lines away from the boat while fishing offshore.\u003c\/p\u003e","brand":"Taco Marine","offers":[{"title":"Default Title","offer_id":49031446888667,"sku":"TAC-OT-0542VEL15-HD","price":824.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51Oh4h97zjL.jpg?v=1785214223"},{"product_id":"taco-marine-rk-0001pb-premium-single-rigging-kit-black-fits-outriggers-up-to-22-feet","title":"Taco Marine RK-0001PB Premium Single Rigging Kit, Black, Fits Outriggers up to 22 Feet","description":"\u003cp\u003eThe Taco Marine RK-0001PB Premium Single Rigging Kit outfits one outrigger line with the hardware needed to run a single sport fishing rigging setup. It is built to rig outriggers up to 22 feet in length, making it suited to a wide range of center console and sport fishing boat outrigger poles. The kit uses a snap hook fastener for quick attachment and release of the rigging line, with stainless steel hardware paired with durable plastic components for corrosion resistance in the marine environment. Finished in black, it matches Taco Marine's Premium rigging line and is sold as a single-line kit (one piece per package).\u003c\/p\u003e\u003cp\u003eThis kit is part of Taco Marine's broader rigging kit lineup, which also includes the Premium Double Rigging Kit (RK-0002PB) for boats running two lines per outrigger, the Premium Center Rigging Kit (RK-0001PCB) for center rigger applications, and the Standard Single Rigging Kit (RK-0001SB) for anglers who do not need the Premium-grade hardware. Choosing the correct kit for your rigging setup and outrigger length ensures proper line deployment and release when a fish strikes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taco Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RK-0001PB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Fishing Outriggers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e Snap Hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigging Capacity:\u003c\/strong\u003e Rigs outriggers up to 22 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Length:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Width:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Height:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.84 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 630838009953\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOutriggers up to 22 feet in length\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taco Marine RK-0001PB used for?\u003c\/strong\u003e RK-0001PB is a Premium Single Rigging Kit used to rig one outrigger line on a sport fishing boat, providing the hardware needed to deploy and release a single line from the outrigger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size outriggers does this rigging kit fit?\u003c\/strong\u003e The RK-0001PB is designed to rig outriggers up to 22 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the RK-0001PB rigging kit?\u003c\/strong\u003e It is finished in black, matching Taco Marine's Premium rigging kit line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many rigging lines does the RK-0001PB set up?\u003c\/strong\u003e This is a single-line kit, containing 1 piece for rigging one outrigger line. Boats running two lines per outrigger need the separate Premium Double Rigging Kit, RK-0002PB.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between RK-0001PB and RK-0001SB?\u003c\/strong\u003e RK-0001PB is the Premium Single Rigging Kit, while RK-0001SB is the Standard Single Rigging Kit; both are single-line kits but sold as distinct part numbers in Taco Marine's rigging lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a center rigging version of this kit?\u003c\/strong\u003e Yes, Taco Marine offers a Premium Center Rigging Kit under part number RK-0001PCB for center rigger setups, as a separate SKU from the RK-0001PB single kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the RK-0001PB rigging kit made of?\u003c\/strong\u003e The kit combines plastic components with stainless steel hardware for corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of fastener does the RK-0001PB use?\u003c\/strong\u003e A snap hook fastener is used on the RK-0001PB for quick attachment and release of the rigging line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the RK-0001PB rigging kit weigh?\u003c\/strong\u003e The Taco Marine RK-0001PB weighs 0.84 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the RK-0001PB?\u003c\/strong\u003e The RK-0001PB ships in a package measuring 10 inches long, 2 inches wide, and 6 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RK-0001PB a genuine Taco Marine part?\u003c\/strong\u003e Yes, RK-0001PB is the genuine Taco Marine part number for this Premium Single Rigging Kit.\u003c\/p\u003e","brand":"Taco Marine","offers":[{"title":"Default Title","offer_id":49031448199387,"sku":"TAC-RK-0001PB","price":131.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61BA1nzWIeL.jpg?v=1785214232"},{"product_id":"taco-marine-rk-0001sb-standard-rigging-kit-rigs-outriggers-up-to-22-feet","title":"TACO Marine RK-0001SB Standard Rigging Kit, Rigs Outriggers up to 22 Feet","description":"\u003cp\u003eThe TACO Marine RK-0001SB Standard Rigging Kit is a complete outrigger rigging set built to get sport fishing outriggers on the water fast. The kit centers on a glass ring fitted with brass strap clips, paired with 100 feet of 1\/8 inch thick black Dacron rigging cord, so anglers have everything needed to run outrigger lines without piecing together components from multiple sources. Adjustable tension release clips let you dial in how much resistance is needed before a line releases from the outrigger, which is a key part of getting a clean strike when trolling. The kit also includes 1-1\/4 inch outrigger line stops to set and hold your desired line position along the pole.\u003c\/p\u003e\u003cp\u003eThis kit is designed to rig outriggers up to 22 feet in length, covering the sizing most sport fishing boats run. Because the ring, clips, cord, and line stops are supplied as one kit, it works as a straightforward way to re-rig aging outriggers or set up new poles without hunting down individual hardware. TACO Marine also lists Premium and Premium Center rigging kits under separate part numbers for anglers who want a different kit tier, but the RK-0001SB is the Standard Single Rigging Kit configuration.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e TACO Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RK-0001SB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Standard Single Rigging Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Fishing Outriggers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass, Metal, Dacron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Outrigger Length:\u003c\/strong\u003e 22 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigging Cord Diameter:\u003c\/strong\u003e 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigging Cord Length:\u003c\/strong\u003e 100 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigging Cord Material:\u003c\/strong\u003e Dacron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigging Cord Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutrigger Line Stop Size:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRing Type:\u003c\/strong\u003e Glass ring with brass strap clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTension Release Clips:\u003c\/strong\u003e Adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.82 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 630838009991\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the TACO Marine RK-0001SB Standard Rigging Kit?\u003c\/strong\u003e The RK-0001SB kit includes a glass ring with brass strap clips, 100 feet of 1\/8 inch thick black Dacron rigging cord, adjustable tension release clips, and 1-1\/4 inch outrigger line stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long of outriggers can this rigging kit handle?\u003c\/strong\u003e The RK-0001SB Standard Rigging Kit is built to rig outriggers up to 22 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the rigging cord made from?\u003c\/strong\u003e The rigging cord in the RK-0001SB kit is 1\/8 inch thick black Dacron cord, supplied in a 100 foot length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the outrigger line stops in this kit?\u003c\/strong\u003e The line stops included with the TACO Marine RK-0001SB kit are 1-1\/4 inch in size, used to set the line position on the outrigger pole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the tension on the release clips adjustable?\u003c\/strong\u003e Yes, the release clips included in the RK-0001SB Standard Rigging Kit are adjustable, allowing you to set how much tension is needed before a line releases.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the ring and clip assembly made of?\u003c\/strong\u003e The RK-0001SB kit uses a glass ring paired with brass strap clips as part of its rigging hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the RK-0001SB rigging kit weigh?\u003c\/strong\u003e The TACO Marine RK-0001SB Standard Rigging Kit weighs 0.82 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the rigging cord in this kit?\u003c\/strong\u003e The Dacron rigging cord supplied with the RK-0001SB kit is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RK-0001SB kit a universal fit or specific to certain outriggers?\u003c\/strong\u003e The RK-0001SB Standard Rigging Kit is listed as a universal fit, sized for outriggers up to 22 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Standard Rigging Kit differ from TACO Marine's other rigging kits?\u003c\/strong\u003e The RK-0001SB is the Standard Single Rigging Kit; TACO Marine also offers a Premium Single Rigging Kit (RK-0002PB) and a Premium Center Rigging Kit (RK-0001PCB) as separate part numbers for anglers wanting a different kit tier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the RK-0001SB kit come with a warranty?\u003c\/strong\u003e The TACO Marine RK-0001SB Standard Rigging Kit includes a one-year limited warranty.\u003c\/p\u003e","brand":"Taco Marine","offers":[{"title":"Default Title","offer_id":49031448232155,"sku":"TAC-RK-0001SB","price":107.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61iBHsJpHWL.jpg?v=1785214232"},{"product_id":"taco-marine-rk-0002mp-premium-mono-double-rigging-kit-for-outrigger-poles-20-feet-or-larger","title":"TACO Marine RK-0002MP Premium Mono Double Rigging Kit for Outrigger Poles 20 Feet or Larger","description":"\u003cp\u003eThe TACO Marine RK-0002MP Premium Mono Double Rigging Kit is a complete double-line rigging package built for carbon fiber outrigger poles 20 feet long or larger. It includes a double roller pulley shock cord fitted with stainless-steel snap hooks, a 180-foot coil of 1\/8 inch thick Lindgren Pitman 400 pound test monofilament line in black, adjustable tension release clips, and 1-3\/4 inch outrigger line stops. Together these five components form a ready-to-rig kit for anglers who need a durable, adjustable double-line spread without sourcing each part separately.\u003c\/p\u003e\u003cp\u003eThe kit is built for saltwater sport fishing use, with a plastic housing on the hardware components and a black finish throughout. The monofilament line offers high-strength, durable performance for repeated deployment and retrieval of outrigger lines, and the adjustable tension release clips let anglers set the release strength to match trolling conditions. The double roller pulley design allows two lines to run smoothly along the same outrigger pole. Care instructions call for hand washing the components in water and storing the kit in a mesh bag between uses.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e TACO Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RK-0002MP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Premium Mono Double Rigging Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Type:\u003c\/strong\u003e Lindgren Pitman Monofilament\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Diameter:\u003c\/strong\u003e 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Length:\u003c\/strong\u003e 180 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Test Strength:\u003c\/strong\u003e 400 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Stop Size:\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1 inch L x 10 inch W x 1 inch Thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.43 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Outrigger poles 20 feet or larger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Adjustable tension release clips\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the TACO Marine RK-0002MP rigging kit?\u003c\/strong\u003e The RK-0002MP kit includes 5 pieces: a double roller pulley shock cord with stainless-steel snap hooks, a 180-foot coil of 1\/8 inch thick 400 pound test Lindgren Pitman monofilament line in black, adjustable tension release clips, and 1-3\/4 inch outrigger line stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size outrigger poles does the RK-0002MP fit?\u003c\/strong\u003e This TACO Marine rigging kit is designed for use on carbon fiber outrigger poles that are 20 feet long or larger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long and how strong is the monofilament line in this kit?\u003c\/strong\u003e The RK-0002MP includes a 180-foot coil of 1\/8 inch thick monofilament line rated at 400 pound test, made by Lindgren Pitman.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a single-line or double-line rigging kit?\u003c\/strong\u003e The RK-0002MP is a double rigging kit, featuring a double roller pulley shock cord that allows two lines to run along the same outrigger pole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the RK-0002MP kit made of?\u003c\/strong\u003e The hardware in the TACO Marine RK-0002MP kit is made of plastic, finished in black, with a monofilament fishing line component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I care for the rigging kit components?\u003c\/strong\u003e TACO Marine recommends hand washing the RK-0002MP components in water and storing them in a mesh bag between uses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the outrigger line stops in this kit?\u003c\/strong\u003e The RK-0002MP kit includes 1-3\/4 inch outrigger line stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the RK-0002MP include adjustable tension settings?\u003c\/strong\u003e Yes, the kit features adjustable tension release clips so the release strength can be set for different trolling conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the RK-0002MP kit?\u003c\/strong\u003e The TACO Marine RK-0002MP measures 1 inch L x 10 inch W x 1 inch thickness and weighs 1.43 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is used to attach the lines?\u003c\/strong\u003e The RK-0002MP double roller pulley shock cord is fitted with stainless-steel snap hooks for attaching outrigger lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in the RK-0002MP kit?\u003c\/strong\u003e The kit contains 5 pieces: the double roller pulley shock cord assembly, monofilament line coil, tension release clips, and line stops.\u003c\/p\u003e","brand":"Taco Marine","offers":[{"title":"Default Title","offer_id":49031448264923,"sku":"TAC-RK-0002MP","price":224.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61EmmiWUPrL.jpg?v=1785214232"},{"product_id":"taco-marine-premium-double-rigging-kit-rk-0002pb-for-2-outriggers-up-to-22-feet","title":"TACO Marine Premium Double Rigging Kit RK-0002PB for 2 Outriggers up to 22 Feet","description":"\u003cp\u003eThe TACO Marine Premium Double Rigging Kit, part number RK-0002PB, supplies everything needed to rig two outriggers for offshore trolling. Built around 200 feet of 1\/8 inch thick black Dacron rigging cord, the kit lets anglers run baits at two different distances off each outrigger pole for a wider spread and better coverage on the troll. Each kit includes a single roller pulley shock cord fitted with a stainless steel snap hook and eye insert, adjustable tension release clips to control how baits release under strike load, and 1-3\/4 inch outrigger line stops to set bait positions along the halyard. A pad eye with mounting screws is included for attaching the rigging to the outrigger pole, and a double sleeve crimp is used in the line construction for a secure, durable connection.\u003c\/p\u003e\u003cp\u003eThe kit is made of plastic componentry with a multicolor finish and is a universal fit, making it suited to a wide range of outrigger setups rather than one specific pole or brand. It ships as a single complete kit (one unit) ready to install, and is intended for sport fishing use where outriggers are used to spread multiple lines and keep baits skipping naturally on the surface.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e TACO Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RK-0002PB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Premium Double Rigging Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutrigger Capacity:\u003c\/strong\u003e Rigs up to 22 feet long outriggers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigging Cord:\u003c\/strong\u003e 1\/8 inch thick, 200 feet Dacron, black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulley:\u003c\/strong\u003e Single roller pulley shock cord with stainless steel snap hook and eye insert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTension Release Clips:\u003c\/strong\u003e Adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Stops:\u003c\/strong\u003e 1-3\/4 inch outrigger line stops\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad Eye:\u003c\/strong\u003e Included with screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrimp Type:\u003c\/strong\u003e Double sleeve crimp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multicolor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9 x 7 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 9.69 x 6.38 x 2.36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.39 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 630838009977\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many outriggers does the RK-0002PB rig kit cover?\u003c\/strong\u003e The TACO Marine RK-0002PB Premium Double Rigging Kit is built to rig two outriggers, giving each pole its own complete set of rigging components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length of outrigger will this kit work with?\u003c\/strong\u003e This kit rigs outriggers up to 22 feet long, making it suited to standard sport fishing outrigger poles rather than an oversized custom rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of cord is included in the kit?\u003c\/strong\u003e 200 feet of 1\/8 inch thick black Dacron rigging cord is included, providing the halyard line used to run and position baits along each outrigger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include a pulley?\u003c\/strong\u003e Yes, a single roller pulley shock cord with a stainless steel snap hook and eye insert is included as part of the RK-0002PB kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the line stops made for?\u003c\/strong\u003e The kit's 1-3\/4 inch outrigger line stops are used to set fixed positions along the rigging line so baits release and run at a consistent distance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a pad eye included for mounting?\u003c\/strong\u003e Yes, a pad eye with mounting screws is included with the Premium Double Rigging Kit for attaching the rigging hardware to the outrigger pole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the RK-0002PB kit made from?\u003c\/strong\u003e The componentry in the TACO Marine RK-0002PB kit is made of plastic, with a multicolor finish across its parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit fit any brand of outrigger pole?\u003c\/strong\u003e The RK-0002PB is a universal fit kit, meaning it is designed to work across a range of outrigger poles rather than one specific pole model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many kits come in one package?\u003c\/strong\u003e One complete Premium Double Rigging Kit (covering two outriggers) is included per package, listed as a single item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the line connected in this kit?\u003c\/strong\u003e The rigging line uses a double sleeve crimp for a secure connection, along with adjustable tension release clips to control bait release under load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Premium Double Rigging Kit and the Premium Single Rigging Kit?\u003c\/strong\u003e The RK-0002PB Premium Double Rigging Kit rigs two outriggers at once, while TACO Marine's Premium Single Rigging Kit (RK-0001PB) rigs only one outrigger; choose the double kit when both poles need rigging in one purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the RK-0002PB rigging kit weigh?\u003c\/strong\u003e The TACO Marine Premium Double Rigging Kit weighs 1.39 pounds.\u003c\/p\u003e","brand":"Taco Marine","offers":[{"title":"Default Title","offer_id":49031448330459,"sku":"TAC-RK-0002PB","price":217.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61EmmiWUPrL_9c0c3645-c165-4dc3-8fb7-50fa36cd5c4d.jpg?v=1785214232"},{"product_id":"taco-marine-rk-0003mp-premium-triple-mono-rigging-kit-for-outriggers-20-feet-and-longer","title":"TACO Marine RK-0003MP Premium Triple Mono Rigging Kit for Outriggers 20 Feet and Longer","description":"\u003cp\u003eThe TACO Marine RK-0003MP Premium Triple Mono Rigging Kit outfits a single outrigger pole with everything needed to run three lines per side, letting a boat pull up to six lines total across both outriggers. It is built for carbon fiber outrigger poles 20 feet long or more, making it a fit for larger sportfishing spreads that need extra coverage and separation between baits.\u003c\/p\u003e\u003cp\u003eAt the core of the kit is a 180 foot coil of Lindgren Pitman 400 pound test monofilament halyard line, measuring 1\/8 inch thick and finished in black for a low-visibility rig on the water. The kit pairs this line with a Ronstan triple roller pulley shock cord assembly fitted with stainless steel snap hooks, so each pole can hold three release points. Adjustable tension release clips let anglers dial in how much pressure is needed to pop a line free when a fish strikes, and 1-3\/4 inch outrigger line stops keep the halyard positioned correctly along the pole.\u003c\/p\u003e\u003cp\u003eEverything in the RK-0003MP is sized and matched to work together as a complete triple-line system, so anglers rigging outriggers from scratch or replacing a worn-out setup can install the full kit rather than sourcing individual components separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e TACO Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RK-0003MP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Premium Mono Triple Rigging Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Type:\u003c\/strong\u003e Lindgren Pitman Monofilament\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Strength:\u003c\/strong\u003e 400 pound test\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Thickness:\u003c\/strong\u003e 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Length:\u003c\/strong\u003e 180 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulley Type:\u003c\/strong\u003e Ronstan triple roller pulley shock cord\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Stainless steel snap hooks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelease Clips:\u003c\/strong\u003e Adjustable tension release clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Stops:\u003c\/strong\u003e 1-3\/4 inch outrigger line stops\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pole Length:\u003c\/strong\u003e 20 feet or more\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 12 x 10 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.82 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 630838085179\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the TACO Marine RK-0003MP kit?\u003c\/strong\u003e The RK-0003MP Premium Triple Mono Rigging Kit includes a 180 foot coil of 1\/8 inch, 400 pound test Lindgren Pitman monofilament line, a Ronstan triple roller pulley shock cord assembly with stainless steel snap hooks, adjustable tension release clips, and 1-3\/4 inch outrigger line stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size outrigger pole does the RK-0003MP fit?\u003c\/strong\u003e This kit is designed for use on carbon fiber outrigger poles that are 20 feet long or more.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many lines can this rigging kit run per outrigger?\u003c\/strong\u003e The RK-0003MP is a triple rigging kit, so it sets up three lines on one outrigger pole; rigging both outriggers with this kit allows up to six lines total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat test line comes with the RK-0003MP?\u003c\/strong\u003e It comes with 400 pound test Lindgren Pitman monofilament line, 1\/8 inch thick and 180 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the release clips adjustable?\u003c\/strong\u003e Yes, the tension release clips in the RK-0003MP kit are adjustable so anglers can set how much pull is needed to release a line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the outrigger line stops made of?\u003c\/strong\u003e The kit's outrigger line stops measure 1-3\/4 inches; TACO Marine lists the kit's overall material as plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the monofilament line in this kit?\u003c\/strong\u003e The 400 pound test monofilament halyard line included in the RK-0003MP is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the shipping dimensions and weight of the RK-0003MP?\u003c\/strong\u003e The Premium Triple Mono Rigging Kit ships in a package measuring 12 x 10 x 2 inches and weighing 1.82 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware connects the shock cord to the line?\u003c\/strong\u003e The RK-0003MP uses a Ronstan triple roller pulley shock cord fitted with stainless steel snap hooks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit for a single outrigger or a pair?\u003c\/strong\u003e One RK-0003MP kit rigs a single outrigger pole with three lines; a second kit is needed to rig the opposite outrigger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the RK-0003MP?\u003c\/strong\u003e The TACO Marine RK-0003MP Premium Triple Mono Rigging Kit has UPC 630838085179.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the RK-0003MP work with braided line instead of monofilament?\u003c\/strong\u003e The RK-0003MP is the monofilament version of this triple rigging kit; TACO Marine also offers a braided-line triple rigging kit as a separate part number for anglers who prefer braid.\u003c\/p\u003e","brand":"Taco Marine","offers":[{"title":"Default Title","offer_id":49031448395995,"sku":"TAC-RK-0003MP","price":490.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61AxPMbhKdL.jpg?v=1785214233"},{"product_id":"taco-metals-grand-slam-outrigger-wedge-plates-wp-150wha-1-white-set-of-5","title":"TACO Metals Grand Slam Outrigger Wedge Plates WP-150WHA-1, White, Set of 5","description":"\u003cp\u003eThe TACO Metals Grand Slam Wedge Plate, part number WP-150WHA-1, is an injection molded wedge plate designed for use with curved T-tops on Grand Slam outrigger mounts. Finished in white, the wedge plate corrects the mounting angle between a curved T-top surface and the outrigger base, allowing the outrigger to sit at the correct working angle instead of following the curve of the T-top. Each unit measures 1 inch in length by 6 inches in width by 1 inch in thickness, and the plate is molded from durable plastic that resists the sun, salt spray, and general wear common to offshore fishing environments.\u003c\/p\u003e\u003cp\u003eThis item is sold as a set of 5 pieces, providing enough wedge plates to shim a full outrigger mount installation or to keep spares on hand for future maintenance. The white finish is intended to blend in with common T-top and hardware color schemes rather than stand out against the boat's finish. Installation involves fitting the wedge plate between the curved T-top surface and the outrigger base hardware to level the mounting interface before final hardware is tightened down.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e TACO Metals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e WP-150WHA-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 1 inch length x 6 inches width x 1 inch thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 630838012106\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Use:\u003c\/strong\u003e Curved T-Tops\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Injection Molded\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the TACO Metals WP-150WHA-1 used for?\u003c\/strong\u003e The WP-150WHA-1 is a wedge plate used with Grand Slam outrigger mounts to correct the mounting angle when the outrigger base is installed on a curved T-top surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many wedge plates come in a set?\u003c\/strong\u003e The WP-150WHA-1 is sold as a set of 5 injection molded wedge plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the WP-150WHA-1 wedge plate?\u003c\/strong\u003e This wedge plate is finished in white to match common T-top and outrigger hardware color schemes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the wedge plate made from?\u003c\/strong\u003e Each WP-150WHA-1 wedge plate is injection molded from plastic for resistance to sun and salt spray exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of each wedge plate?\u003c\/strong\u003e Each WP-150WHA-1 wedge plate measures 1 inch in length by 6 inches in width by 1 inch in thickness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the WP-150WHA-1 work with flat T-tops?\u003c\/strong\u003e The WP-150WHA-1 wedge plate is designed for use with curved T-tops to level the mounting surface for a Grand Slam outrigger base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the WP-150WHA-1 set weigh?\u003c\/strong\u003e The complete set of WP-150WHA-1 wedge plates weighs 0.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the wedge plate installed?\u003c\/strong\u003e The WP-150WHA-1 is fitted between the curved T-top surface and the outrigger mount hardware to correct the mounting angle before the mounting hardware is tightened.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WP-150WHA-1 compatible with any outrigger brand?\u003c\/strong\u003e The WP-150WHA-1 wedge plate is designed specifically for use with Grand Slam outrigger mounts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the WP-150WHA-1 wedge plate set?\u003c\/strong\u003e The WP-150WHA-1 wedge plate set carries UPC 630838012106.\u003c\/p\u003e","brand":"Taco Marine","offers":[{"title":"Default Title","offer_id":49031451246811,"sku":"TAC-WP-150WHA-1","price":147.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51V1oaYvKDL.jpg?v=1785214252"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/01551_01.jpg?v=1785356919","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-fishing-accessories-outriggers-rigging.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}