{"title":"Fishing Accessories","description":null,"products":[{"product_id":"sea-dog-325028-1-two-pole-side-mount-rod-holder-with-knife-and-lure-holder-white-polypropylene","title":"Sea-Dog Two Pole Side Mount Rod Holder with Knife and Lure Holder - White, 325028-1","description":"\u003cp\u003eThe Sea-Dog Two Pole Side Mount Rod Holder (325028-1) is a two-position rod holder designed to mount to the side of a boat, console, or gunwale, keeping fishing rods secure and within easy reach. It is molded as one piece from injection molded, UV stabilized polypropylene, giving it resistance to sun and saltwater exposure without seams or fasteners in the rod tube itself. Each holder accommodates rods up to 1-3\/4 inch in diameter, covering the great majority of spinning and casting rod butts and reel seats.\u003c\/p\u003e\u003cp\u003eBeyond the two rod tubes, this holder includes a built-in knife holder and a built-in lure holder, so a fillet or rigging knife and a spare lure or two can be kept on the same unit as the rods, freeing up tackle box space at the rail. No assembly is required out of the box; the unit installs directly to a flat mounting surface using four #8 fasteners, which are included with the display packed product. This part number, 325028-1, is the white color option. The same rod holder is also available in black under part number 325029-1, which is a separate SKU for buyers who want to match a black gunwale or hardware set.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 325028-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection molded, UV stabilized polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Diameter Capacity:\u003c\/strong\u003e Up to 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Rod Holders:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 10-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension F:\u003c\/strong\u003e 4-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.722 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Four #8 fasteners (included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514326247\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 325028-1 rod holder made of?\u003c\/strong\u003e It is made from one piece of injection molded, UV stabilized polypropylene, which resists sun and saltwater exposure without joints or seams in the rod tubes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size rods fit in the Sea-Dog 325028-1 rod holder?\u003c\/strong\u003e The 325028-1 accommodates fishing rods up to 1-3\/4 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 325028-1 rod holder have a knife holder?\u003c\/strong\u003e Yes, this two pole side mount rod holder has a built-in knife holder as well as a built-in lure holder, in addition to its two rod tubes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with part number 325028-1?\u003c\/strong\u003e Yes, four #8 fasteners are included with the display packed 325028-1 rod holder for side mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 325028-1 require assembly?\u003c\/strong\u003e No assembly is required; it installs directly with the included four #8 fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 325028-1 version of this rod holder?\u003c\/strong\u003e Part number 325028-1 is the white color option of the Sea-Dog Two Pole Side Mount Rod Holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a black version of this rod holder available?\u003c\/strong\u003e Yes, the same two pole side mount rod holder is offered in black under the separate part number 325029-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many rods does the Sea-Dog 325028-1 hold?\u003c\/strong\u003e This side mount unit holds two rods, one in each of its two rod tubes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 325028-1 rod holder?\u003c\/strong\u003e The 325028-1 measures 9 inches (A), 1-3\/4 inches (B), 1-3\/4 inches (C), 10-3\/4 inches (D), 8 inches (E), and 4-5\/8 inches (F) across its mounting profile.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 325028-1 rod holder weigh?\u003c\/strong\u003e The 325028-1 rod holder weighs 0.722 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 325028-1 rod holder UV stabilized for marine use?\u003c\/strong\u003e Yes, it is molded from UV stabilized polypropylene, making it suitable for continued sun exposure on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 325028-1 rod holder?\u003c\/strong\u003e The UPC for the white Sea-Dog Two Pole Side Mount Rod Holder, part number 325028-1, is 035514326247.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988662169819,"sku":"S-D-325028-1","price":18.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4598.png?v=1784426352"},{"product_id":"sea-dog-325121-1-side-mount-rod-holder-white-injection-molded-polypropylene-holds-rods-to-1-3-4-in","title":"Sea-Dog 325121-1 Side Mount Rod Holder, White, Fits Rods up to 1-3\/4 Inch","description":"\u003cp\u003eThe Sea-Dog 325121-1 is a side mount rod holder built for anglers who need a simple, durable way to stow a fishing rod within easy reach. Constructed of injection molded polypropylene, it resists corrosion and weathering, making it well suited to a saltwater or freshwater environment where metal hardware would eventually pit or rust. The rod holder accommodates rods up to 1-3\/4 inch in diameter, covering the great majority of spinning and casting rod handles used on center consoles, bay boats, and pontoons.\u003c\/p\u003e\u003cp\u003eWhat sets this design apart is the integral, molded-in standoff on the back of the holder. Because the standoff is molded as one piece with the body, it allows direct mounting to any flat surface without a separate bracket, simplifying installation on a gunwale, console side, or T-top leg. Installation requires two #10 round head fasteners, which are not included, so buyers should have the appropriate stainless hardware on hand before mounting. The holder is finished in white to match light-colored gelcoat and hull surfaces, and it is sold individually for boat owners who need to add or replace a single holder rather than buy a multi-pack.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 325121-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection molded polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Diameter Capacity:\u003c\/strong\u003e Up to 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 11.68 inches H x 2.38 inches W x 2.37 inches D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Direct mount to any flat surface via integral molded-in standoff\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Requirement:\u003c\/strong\u003e Two #10 round head fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.274 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Sold individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514325165\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits fishing rods with a handle diameter up to 1-3\/4 inches. Universal fit for mounting to any flat surface; not vessel- or engine-specific.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rod does the Sea-Dog 325121-1 rod holder fit?\u003c\/strong\u003e It accommodates fishing rods with a handle diameter of up to 1-3\/4 inches, which covers most spinning and casting rod handles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this rod holder made from?\u003c\/strong\u003e The 325121-1 is constructed of injection molded polypropylene, a corrosion-resistant plastic suited to marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 325121-1 come with mounting hardware?\u003c\/strong\u003e No, installation requires two #10 round head fasteners that are not included with the rod holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog 325121-1 mounted?\u003c\/strong\u003e It has an integral, molded-in standoff on the back of the holder that allows direct mounting to any flat surface, so no separate mounting bracket is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 325121-1?\u003c\/strong\u003e This version of the Sea-Dog side mount rod holder is white; the same design is also made in black and gray under different part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this rod holder?\u003c\/strong\u003e The Sea-Dog 325121-1 measures 11.68 inches high by 2.38 inches wide by 2.37 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 325121-1 rod holder weigh?\u003c\/strong\u003e It weighs 0.274 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 325121-1 sold as a single unit or in a pack?\u003c\/strong\u003e The Sea-Dog 325121-1 rod holder is sold individually, one holder per unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Sea-Dog 325121-1 manufactured?\u003c\/strong\u003e This rod holder's country of origin is the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 325121-1 be mounted vertically or at an angle on a flat surface?\u003c\/strong\u003e Because the molded-in standoff mounts to any flat surface, the 325121-1 can be installed on a gunwale, console side, or similar flat panel wherever a flat mounting surface is available.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 325121-1 rated for saltwater use?\u003c\/strong\u003e Its injection molded polypropylene construction resists corrosion, making the 325121-1 suitable for saltwater as well as freshwater use.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988662202587,"sku":"S-D-325121-1","price":10.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8000.jpg?v=1784426397"},{"product_id":"sea-dog-325160-1-flush-mount-rod-holder-black-30-degree-uv-resistant-abs-fits-rods-to-1-5-8-in","title":"Sea-Dog Flush Mount Rod Holder 325160-1, Black ABS, Fits Rods up to 1-5\/8 Inch","description":"\u003cp\u003eThe Sea-Dog 325160-1 is a flush mount rod holder built for permanent deck installation on boats and docks. It is constructed of injection molded ABS that is UV resistant, so it holds up to sun exposure and marine conditions without becoming brittle or fading. The holder is set at a 30 degree angle, a common angle for trolling and general fishing rod storage, and it accommodates fishing rods up to 1-5\/8 inches in diameter.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the holder mounts flush to the deck surface and is secured with three #12 FH (flat head) fasteners, which are not included and must be purchased separately. This particular unit, part number 325160-1, is finished in black. An optional cap and gasket assembly (325160CAP) is sold separately for owners who want to cover the holder opening when it is not in use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 325160-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Flush Mount Rod Holder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded ABS (UV Resistant)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Diameter Capacity:\u003c\/strong\u003e Up to 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Angle:\u003c\/strong\u003e 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Depth:\u003c\/strong\u003e 9-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional Dimensions (C\/D):\u003c\/strong\u003e 2-1\/2 inches \/ 2-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Flush Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #12 FH screws, three required (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Included:\u003c\/strong\u003e No (optional cap and gasket sold separately, part number 325160CAP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.354 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514325066\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rod does the Sea-Dog 325160-1 rod holder fit?\u003c\/strong\u003e The Sea-Dog 325160-1 accommodates fishing rods up to 1-5\/8 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this rod holder made from?\u003c\/strong\u003e It is made of injection molded ABS that is UV resistant, allowing part number 325160-1 to withstand ongoing sun and marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAt what angle does the 325160-1 hold the rod?\u003c\/strong\u003e The holder positions the rod at a 30 degree angle for flush mount installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 325160-1 come in a color other than black?\u003c\/strong\u003e This part, 325160-1, is black. Sea-Dog also offers the same rod holder in white under a different part number, 325161-1, which is a separate SKU.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting screws included with this rod holder?\u003c\/strong\u003e No. The 325160-1 installs with three #12 FH (flat head) fasteners, which are not included and need to be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 325160-1 include a cap?\u003c\/strong\u003e No, this listing does not include a cap. An optional cap and gasket for the holder is sold separately under part number 325160CAP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow deep is the Sea-Dog 325160-1 rod holder?\u003c\/strong\u003e The overall depth of the 325160-1 is 9-3\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 325160-1 rod holder weigh?\u003c\/strong\u003e The Sea-Dog 325160-1 weighs 0.354 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 325160-1 a flush mount or surface mount rod holder?\u003c\/strong\u003e It is a flush mount rod holder, designed to be installed flush with the deck surface rather than mounted on top of it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 325160-1?\u003c\/strong\u003e The UPC for the black Sea-Dog 325160-1 flush mount rod holder is 035514325066.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 325160-1 be used in saltwater environments?\u003c\/strong\u003e Yes, the UV resistant injection molded ABS construction of the 325160-1 is designed to hold up to marine environments, including sun and saltwater exposure typical of boat deck hardware.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988662268123,"sku":"S-D-325160-1","price":9.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7137.jpg?v=1784426434"},{"product_id":"sea-dog-325161-1-flush-mount-rod-holder-white-30-degree-abs-fits-rods-up-to-1-5-8-in","title":"Sea-Dog Flush Mount Rod Holder 325161-1, White ABS, Fits Rods up to 1-5\/8 Inch, 30 Degree Angle","description":"\u003cp\u003eThe Sea-Dog 325161-1 is a flush mount fishing rod holder designed to install directly into a boat's gunwale, deck, or hardtop for a clean, low-profile look when not in use. It accommodates rods up to 1-5\/8 inches in diameter and is set at a 30 degree angle to hold rods securely while trolling or at rest. The holder is constructed of injection molded ABS that is UV resistant, so it holds up to sun exposure without becoming brittle or discolored over time.\u003c\/p\u003e\u003cp\u003eThis White version installs with three #12 flat head (FH) fasteners, which are not included and must be sourced separately to match the mounting surface. An optional cap and gasket assembly is available separately to keep water and debris out of the holder when it is not in use. The holder measures 9-3\/16 inches for its primary dimension and 1-5\/8 inches at the rod opening, with additional table dimensions of 2-1\/2 inches and 2-5\/8 inches. It is a straightforward, no-hardware-included flush mount solution for anglers who want a permanent rod storage point on their boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 325161-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Diameter Capacity:\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Angle:\u003c\/strong\u003e 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 9-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 2-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Flush Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #12 FH (flat head), fasteners not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Included:\u003c\/strong\u003e No (cap and gasket sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.364 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514325073\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Resistant:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rods fit in the Sea-Dog 325161-1 rod holder?\u003c\/strong\u003e Rods up to 1-5\/8 inches in diameter fit the Sea-Dog 325161-1 flush mount rod holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle does this rod holder sit at?\u003c\/strong\u003e The 325161-1 is set at a 30 degree angle for holding rods while trolling or at rest.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 325161-1 made from?\u003c\/strong\u003e It is made of injection molded ABS that is UV resistant, so it will not become brittle or discolored from prolonged sun exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with this rod holder?\u003c\/strong\u003e No. The Sea-Dog 325161-1 installs with three #12 flat head (FH) fasteners, which are not included and need to be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 325161-1 come with a cap?\u003c\/strong\u003e No, this White Sea-Dog flush mount rod holder does not include a cap. A cap and gasket assembly is sold as a separate accessory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 325161-1 rod holder?\u003c\/strong\u003e The 325161-1 is White. Sea-Dog also makes the same flush mount rod holder in Black under a different part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog 325161-1 installed?\u003c\/strong\u003e It is a flush mount design that installs into a hole cut in the gunwale, deck, or hardtop, secured with three #12 FH fasteners (not included).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this rod holder?\u003c\/strong\u003e The Sea-Dog 325161-1 measures 9-3\/16 inches on its primary dimension and 1-5\/8 inches at the rod opening, with additional listed dimensions of 2-1\/2 inches and 2-5\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 325161-1 weigh?\u003c\/strong\u003e The Sea-Dog 325161-1 flush mount rod holder weighs 0.364 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 325161-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, the 325161-1 is a genuine Sea-Dog flush mount rod holder, not an aftermarket copy.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988662366427,"sku":"S-D-325161-1","price":8.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7137_921c7f2f-f847-4669-bc0f-7f426c68358c.jpg?v=1784426481"},{"product_id":"sea-dog-325168-1-flush-mount-rod-holder-with-stainless-steel-top-cap-30-degree-angle-fits-rods-up-to-1-5-8-in","title":"Sea-Dog Flush Mount Rod Holder with Stainless Steel Top, Fits Rods up to 1-5\/8 Inch","description":"\u003cp\u003eThis Sea-Dog flush mount rod holder combines a UV resistant injection molded ABS body with a stainless steel top cap, giving it the classic look of an all-metal rod holder at a lighter, more economical weight. It is designed to be recessed into a gunwale, hardtop, or console so only the stainless top ring and rod opening sit flush with the surrounding surface.\u003c\/p\u003e\u003cp\u003eThe holder accepts rods up to 1-5\/8 inches in diameter and is set at a 30 degree angle, a standard trolling and holding angle that keeps rods secured and lines clear while fishing or running. The ABS body resists UV degradation and corrosion from saltwater spray, while the stainless steel top cap adds a durable, good looking wear surface at the point of most contact with the rod butt.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the holder mounts with three 1\/4 inch FH fasteners (fasteners not included), so it can be dropped into a properly sized cutout and secured from below or through the mounting flange. Overall footprint is 9-1\/2 inches long by 2-1\/2 inches wide by 2-5\/8 inches deep, making it suitable for standard rod holder cutouts on boats, docks, and rail mounts.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 325168-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Flush Mount Rod Holder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded ABS with Stainless Steel Top\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Diameter Capacity:\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Angle:\u003c\/strong\u003e 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 9-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 2-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Stainless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 1\/4 inch FH (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.72 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514326384\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rods fit this Sea-Dog rod holder?\u003c\/strong\u003e The Sea-Dog 325168-1 flush mount rod holder accommodates rods up to 1-5\/8 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle does the 325168-1 rod holder hold rods at?\u003c\/strong\u003e It holds rods at a 30 degree angle, the standard angle used for trolling and general rod storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rod holder made of?\u003c\/strong\u003e The body is UV resistant injection molded ABS, topped with a stainless steel cap for a classic metal look and added durability at the rod opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with the 325168-1?\u003c\/strong\u003e No, fasteners are not included. The holder installs with three 1\/4 inch FH fasteners that you supply separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this rod holder?\u003c\/strong\u003e The Sea-Dog 325168-1 measures 9-1\/2 inches long, 2-1\/2 inches wide, and 2-5\/8 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 325168-1 rod holder weigh?\u003c\/strong\u003e It weighs 0.72 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this rod holder flush mount or surface mount?\u003c\/strong\u003e It is a flush mount rod holder, designed to be recessed into a gunwale, hardtop, or console so the stainless top sits level with the surrounding surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the stainless top cap cover the whole holder or just the top?\u003c\/strong\u003e Only the top cap and visible ring are stainless steel; the main body of the 325168-1 is injection molded ABS.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options does this rod holder come in?\u003c\/strong\u003e The Sea-Dog 325168-1 is finished in stainless (the natural stainless steel top cap color) on an ABS body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an optional cap available for this rod holder when not in use?\u003c\/strong\u003e Sea-Dog offers a separate optional cap and gasket accessory for this rod holder line, sold under its own part number rather than included with the 325168-1.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988662497499,"sku":"S-D-325168-1","price":27.87,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8002.jpg?v=1784426545"},{"product_id":"sea-dog-325173-1-economy-90-degree-flush-mount-rod-holder-with-cap-304-stainless-steel-fits-rods-up-to-1-1-2-in","title":"Sea-Dog Economy 90 Degree Flush Mount Rod Holder with Cap, 325173-1, Fits Rods up to 1-1\/2 Inch","description":"\u003cp\u003eThe Sea-Dog 325173-1 Economy 90 Degree Flush Mount Rod Holder with Cap is a value-priced, vertical mount rod holder built for anglers who want a durable, corrosion resistant fitting without a premium price tag. It is formed from 304 stainless steel and set at a 90 degree angle, making it suited to straight-up rod storage rather than an angled trolling position. The holder accommodates rods up to 1-1\/2 inches in diameter and comes complete with a plastic liner, a mounting gasket, and an integral cap to keep water and debris out of the tube when not in use.\u003c\/p\u003e\u003cp\u003eInstallation is a simple flush-mount job: the holder sets into a cutout in the gunwale, deck, or hardtop and is secured with three number 12 flat head fasteners (fasteners are not included). The plastic liner protects rod finishes from contact with the stainless housing, while the mounting gasket seals the fitting against the mounting surface. A replacement cap and gasket set is available separately under part number 325238-1 for owners who need to replace a worn or lost cap down the road.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 325173-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Formed 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiner Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Angle:\u003c\/strong\u003e 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Diameter Capacity:\u003c\/strong\u003e Up to 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 8-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-9\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e 1\/4 inch FH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Three number 12 FH fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap:\u003c\/strong\u003e Integral cap included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514325929\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal flush mount rod holder for rods up to 1-1\/2 inches in diameter; it is not tied to a specific boat make or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rods fit the Sea-Dog 325173-1 rod holder?\u003c\/strong\u003e The 325173-1 flush mount rod holder accommodates fishing rods up to 1-1\/2 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle does this rod holder mount at?\u003c\/strong\u003e It mounts at a 90 degree angle, making the Sea-Dog 325173-1 a straight vertical rod holder rather than an angled model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 325173-1 rod holder made from?\u003c\/strong\u003e It is formed from 304 stainless steel for corrosion resistance, with a plastic liner inside the tube to protect rod finishes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 325173-1 rod holder come with a cap?\u003c\/strong\u003e Yes, an integral cap is included with the 325173-1 to help keep water and debris out of the holder when a rod is not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install this rod holder?\u003c\/strong\u003e The Sea-Dog 325173-1 installs with three number 12 flat head (FH) fasteners; the fasteners themselves are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a mounting gasket included with the 325173-1?\u003c\/strong\u003e Yes, a mounting gasket ships with the 325173-1 to seal the rod holder against the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 325173-1 rod holder?\u003c\/strong\u003e The 325173-1 measures 8-1\/4 inches (A), 1-9\/16 inches (B), 2-3\/16 inches (C), and 3 inches (D), with a 1\/4 inch FH fastener size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 325173-1 rod holder weigh?\u003c\/strong\u003e The 325173-1 rod holder weighs 1.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy a replacement cap for this rod holder separately?\u003c\/strong\u003e Yes, a replacement cap and gasket set for the 325173-1 is available under part number 325238-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 325173-1 suitable for saltwater use?\u003c\/strong\u003e The 325173-1 is built from formed 304 stainless steel, which is corrosion resistant and suited to marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this rod holder a flush mount or a surface mount design?\u003c\/strong\u003e The 325173-1 is a flush mount rod holder, installed into a cutout with three number 12 FH fasteners rather than mounted on top of a surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a version of this rod holder with a different angle or material?\u003c\/strong\u003e Sea-Dog also offers a 316 stainless steel flush mount rod holder with cap (325175-1) at a 30 degree angle, as a separate part from the 90 degree 325173-1 economy model.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988662792411,"sku":"S-D-325173-1","price":42.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8003.jpg?v=1784426591"},{"product_id":"sea-dog-325175-1-flush-mount-rod-holder-with-cap-formed-316-stainless-steel-30-degree-angle-fits-rods-up-to-1-1-2-in","title":"Sea-Dog 325175-1 Flush Mount Rod Holder with Cap, Investment Cast 316 Stainless Steel, Fits Rods up to 1-1\/2 Inch","description":"\u003cp\u003eThe Sea-Dog 325175-1 is a flush mount rod holder built from investment cast 316 stainless steel, giving it corrosion resistance suitable for saltwater use. Unlike simpler stamped rod holders, this design incorporates a gasket at the mounting flange to reduce the leakage that is common with other cast rod holders, helping keep water out of the deck or gunwale where it is installed. It accommodates fishing rods up to 1-1\/2 inch in diameter and mounts at a 30 degree angle, a standard angle for holding rods securely while trolling or at rest.\u003c\/p\u003e\u003cp\u003eThe rod holder is fitted with a UV resistant PVC cap and a full length polyethylene (PE) liner, protecting rod butts from wear and shielding the holder interior from the elements when not in use. This cap and liner combination is the same one used on Sea-Dog's stamped stainless steel rod holder (325175), so anglers get the same fit and finish in an investment cast body. Installation is done with three 1\/4 inch FH fasteners, which are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003eBecause it is a flush mount design, the 325175-1 sits cleanly against the mounting surface for a low profile look on gunwales, hardtops, or rod holder mounts. Its stainless steel construction and gasketed fit make it a durable, corrosion resistant choice for offshore and inshore fishing boats alike.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 325175-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Material:\u003c\/strong\u003e UV Resistant PVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiner Material:\u003c\/strong\u003e Polyethylene (full length)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Flush Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Holder Angle:\u003c\/strong\u003e 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Capacity:\u003c\/strong\u003e Up to 1-1\/2 inch diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Required:\u003c\/strong\u003e Three 1\/4 inch FH fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 4.5 inches D x 1.5 inches W x 0.63 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.222 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514325028\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size fishing rods fit the Sea-Dog 325175-1 rod holder?\u003c\/strong\u003e The Sea-Dog 325175-1 flush mount rod holder accommodates fishing rods up to 1-1\/2 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 325175-1 rod holder include mounting hardware?\u003c\/strong\u003e No, the Sea-Dog 325175-1 installs with three 1\/4 inch FH fasteners, which are not included and need to be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle does this rod holder mount at?\u003c\/strong\u003e The Sea-Dog 325175-1 mounts at a 30 degree angle, standard for securely holding a rod while trolling or at rest.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 325175-1 rod holder made of?\u003c\/strong\u003e It is constructed of corrosion resistant investment cast 316 stainless steel with a UV resistant PVC cap and a full length polyethylene liner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 325175-1 reduce leakage compared to other cast rod holders?\u003c\/strong\u003e The 325175-1 incorporates a gasket at the mounting point, a feature designed specifically to reduce the leakage common on other cast rod holders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 325175-1 different from Sea-Dog's rod holder 325175?\u003c\/strong\u003e The 325175-1 is an investment cast 316 stainless steel version with a gasketed, leak-reducing design, while it uses the same PE liner and PVC cap as the stamped stainless steel rod holder 325175.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 325175-1?\u003c\/strong\u003e The Sea-Dog 325175-1 measures 4.5 inches deep by 1.5 inches wide by 0.63 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 325175-1 suitable for saltwater use?\u003c\/strong\u003e Yes, its investment cast 316 stainless steel construction is corrosion resistant, making the 325175-1 suitable for saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 325175-1 rod holder weigh?\u003c\/strong\u003e The Sea-Dog 325175-1 weighs 1.222 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 325175-1 come with a cap for the rod holder?\u003c\/strong\u003e Yes, the 325175-1 includes a UV resistant PVC cap along with a full length polyethylene liner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 325175-1 a flush mount or surface mount rod holder?\u003c\/strong\u003e It is a flush mount rod holder, designed to sit into the mounting surface rather than sit on top of it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 325175-1 rod holder?\u003c\/strong\u003e The UPC for the Sea-Dog 325175-1 flush mount rod holder is 035514325028.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988662857947,"sku":"S-D-325175-1","price":41.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8004.jpg?v=1784426638"},{"product_id":"sea-dog-325190-1-removable-side-mount-rod-holder-316-stainless-steel-30-degree-angle","title":"Sea-Dog Side Mount Rod Holder 325190-1, Formed 316 Stainless Steel, Fits Rods up to 1-13\/16 Inch","description":"\u003cp\u003eThe Sea-Dog 325190-1 is a side mount rod holder built from formed 316 stainless steel for corrosion resistance in marine environments. It is designed to accommodate fishing rods up to 1-13\/16 inches in diameter and mounts at a 30 degree angle. A key feature of this rod holder is that it slides in and out of its mounting plate, allowing it to be removed for a lower profile look when it is not in use and reinstalled when you are ready to fish. The unit installs with four 1\/4 inch FH fasteners, which are not included and must be purchased separately. Overall length (A) is 9 inches, with a rod opening diameter (B) of 1-13\/16 inches, a depth (C) of 2-15\/16 inches, and a mounting footprint (D) of 3-1\/4 inches. The matching mounting plate is sold separately under part number 325199-1, and a replacement end cap is available as part number 0P32505 if the original cap is lost or damaged. This side mount rod holder is a straightforward, durable option for boat owners who want a removable rod holder rather than a permanently protruding flush mount unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 325190-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Side Mount Rod Holder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Formed 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Angle:\u003c\/strong\u003e 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Diameter Capacity:\u003c\/strong\u003e 1-13\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-13\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 3-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e 1\/4 inch FH, four required, not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.586 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514325783\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal side mount rod holder, not tied to a specific boat make, model, or engine.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rod does the Sea-Dog 325190-1 rod holder fit?\u003c\/strong\u003e The 325190-1 side mount rod holder accommodates rods up to 1-13\/16 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle does this rod holder sit at?\u003c\/strong\u003e It mounts at a 30 degree angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this rod holder be removed when not in use?\u003c\/strong\u003e Yes, the 325190-1 slides in and out of its mounting plate, giving it a lower profile when it is not holding a rod.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 325190-1 made from?\u003c\/strong\u003e It is constructed of formed 316 stainless steel, chosen for its resistance to marine corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install this rod holder?\u003c\/strong\u003e Installation requires four 1\/4 inch FH fasteners, which are not included with the 325190-1 and need to be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 325190-1 come with a mounting plate?\u003c\/strong\u003e No, the mounting plate is sold separately as part number 325199-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this rod holder weigh?\u003c\/strong\u003e The Sea-Dog 325190-1 weighs 1.586 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 325190-1 rod holder?\u003c\/strong\u003e It measures 9 inches overall (A), 1-13\/16 inches at the rod opening (B), 2-15\/16 inches in depth (C), and 3-1\/4 inches at the mounting base (D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a replacement end cap available for this rod holder?\u003c\/strong\u003e Yes, a replacement end cap for the 325190-1 series is available as part number 0P32505.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 325190-1 different from Sea-Dog's 90 degree flush mount rod holder?\u003c\/strong\u003e The 325190-1 is a side mount design that slides out of its mounting plate for a lower profile, whereas Sea-Dog's 90 degree flush mount rod holder is a fixed, vertically mounted unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 325190-1 genuine Sea-Dog hardware?\u003c\/strong\u003e Yes, the 325190-1 is a genuine Sea-Dog side mount rod holder made from formed 316 stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 325190-1 rod holder?\u003c\/strong\u003e The UPC for the 325190-1 side mount rod holder is 035514325783.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988663087323,"sku":"S-D-325190-1","price":120.78,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7280.jpg?v=1784426671"},{"product_id":"sea-dog-325239-1-replacement-cap-and-gasket-for-flush-mount-rod-holder-fits-325175-325176-325235","title":"Sea-Dog Rod Holder Cap and Gasket 325239-1 for 325235 and 325236 Flush Mount Rod Holders","description":"\u003cp\u003eThe Sea-Dog 325239-1 is a replacement cap and gasket set for Sea-Dog investment cast 316 stainless steel flush mount rod holders. It is used as the standard cap and gasket on rod holder 325235 (where the gasket design reduces the leakage common on other cast rod holders) and as an optional cap and gasket upgrade on rod holder 325236. The cap is constructed of UV resistant PVC and is paired with a full length PE (polyethylene) liner, protecting the rod holder interior and providing a clean seal at the mounting cap. This same cap and liner design is also used on Sea-Dog's stamped stainless steel rod holder, model 325175, making 325239-1 a useful replacement part across multiple Sea-Dog rod holder lines. The cap and gasket are sized for rod holders that accommodate fishing rods up to 1-1\/2 inch in diameter. As a standalone service part, 325239-1 lets an owner replace a worn, cracked, or missing cap and gasket without replacing the entire rod holder body, restoring the leak-reducing seal at the base of the rod holder.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 325239-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Rod Holder Accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Material:\u003c\/strong\u003e UV resistant PVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiner Material:\u003c\/strong\u003e PE (polyethylene)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.178 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514325110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Rod Holders:\u003c\/strong\u003e 325235, 325236, 325175\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Diameter Accommodated:\u003c\/strong\u003e up to 1-1\/2 inch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSea-Dog Flush Mount Rod Holder 325235 (standard cap and gasket)\u003c\/li\u003e\n\u003cli\u003eSea-Dog Flush Mount Rod Holder 325236 (optional cap and gasket)\u003c\/li\u003e\n\u003cli\u003eSea-Dog stamped stainless steel Rod Holder 325175 (same cap and liner design)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 325239-1 used for?\u003c\/strong\u003e It is a replacement cap and gasket set for Sea-Dog investment cast 316 stainless steel flush mount rod holders, used to restore the cap and seal without replacing the entire rod holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 325239-1 fit the Sea-Dog 325235 rod holder?\u003c\/strong\u003e Yes, 325239-1 is the cap and gasket used on the Sea-Dog 325235 flush mount rod holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 325239-1 fit the Sea-Dog 325236 rod holder?\u003c\/strong\u003e Yes, 325239-1 serves as the optional cap and gasket for the Sea-Dog 325236 flush mount rod holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cap and gasket work on rod holder 325175?\u003c\/strong\u003e Yes, the same cap and liner design used in part 325239-1 is also used on the Sea-Dog stamped stainless steel Rod Holder 325175.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cap made of?\u003c\/strong\u003e The 325239-1 cap is made of UV resistant PVC, paired with a full length PE (polyethylene) liner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 325239-1 include a gasket?\u003c\/strong\u003e Yes, it is sold as a cap and gasket set, and the gasket design is intended to reduce the leakage common on other cast rod holders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rod diameter does this cap fit?\u003c\/strong\u003e The 325239-1 cap and gasket is sized for Sea-Dog rod holders that accommodate fishing rods up to 1-1\/2 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 325239-1 cap and gasket weigh?\u003c\/strong\u003e The Sea-Dog 325239-1 weighs 0.178 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with 325239-1?\u003c\/strong\u003e No, 325239-1 is only the cap and gasket; it does not include the fasteners used to mount the rod holder body itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog part?\u003c\/strong\u003e Yes, 325239-1 is a genuine Sea-Dog manufacturer part number, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 325235 and 325236 versions of this cap?\u003c\/strong\u003e Both the Sea-Dog 325235 and 325236 flush mount rod holders use the identical 325239-1 cap and gasket; it is the standard cap on the 325235 and offered as an optional cap on the 325236.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 325239-1?\u003c\/strong\u003e The UPC for the Sea-Dog 325239-1 cap and gasket is 035514325110.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988664004827,"sku":"S-D-325239-1","price":5.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8004_0b58fc38-1198-4f3f-85c2-2b0fd256369c.jpg?v=1784426795"},{"product_id":"sea-dog-325613-1-three-rod-storage-rack-with-soft-foam-inserts-uv-resistant-polypropylene-8-fh-fasteners-included","title":"Sea-Dog Rod Storage Rack 325613-1, Holds 3 Fishing Rods, UV Resistant Polypropylene","description":"\u003cp\u003eThe Sea-Dog Rod Storage Rack (325613-1) is a wall-mounted rack designed to hold three fishing rods aboard a boat, in a garage, or in a rod locker. Soft foam inserts cradle each rod, protecting blanks and guides from damage caused by rough seas or general handling. The rack is constructed of UV resistant injection molded polypropylene, a durable, corrosion resistant material well suited to marine environments where sun and saltwater exposure degrade lesser plastics over time.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the rack mounts with #8 FH (flat head) fasteners, which are included, so no separate hardware purchase is needed. The rack measures 7-13\/16 inches by 4-3\/16 inches by 1-15\/16 inches by 2-7\/8 inches across its mounting points, keeping it compact for cabins, garage walls, or rod lockers. At 0.53 pounds, it adds minimal weight wherever it is mounted. For anglers who need to store more rods, Sea-Dog also offers the 325615-1, a five-rod version of the same rack design (a separate part number).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 325613-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rod Storage Rack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Capacity:\u003c\/strong\u003e Holds 3 rods\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV resistant injection molded polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Wall mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #8 FH (flat head) fasteners, included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 7-13\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 4-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 2-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.53 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514325714\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many rods does the Sea-Dog 325613-1 rack hold?\u003c\/strong\u003e The Sea-Dog 325613-1 rod storage rack holds 3 fishing rods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rack made of?\u003c\/strong\u003e It is constructed of UV resistant injection molded polypropylene, a durable material suited to marine sun and saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included?\u003c\/strong\u003e Yes, the Sea-Dog 325613-1 installs with #8 FH (flat head) fasteners that are included in the package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the rack weigh?\u003c\/strong\u003e The Sea-Dog 325613-1 rod storage rack weighs 0.53 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 325613-1 rack?\u003c\/strong\u003e The rack measures 7-13\/16 inches by 4-3\/16 inches by 1-15\/16 inches by 2-7\/8 inches across its mounting points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the rack protect rods from damage?\u003c\/strong\u003e Yes, soft foam inserts in the Sea-Dog 325613-1 cradle each rod to reduce potential damage from rough seas or handling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog 325613-1 rod rack?\u003c\/strong\u003e This rod storage rack is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a version that holds more rods?\u003c\/strong\u003e Sea-Dog also offers the 325615-1, a five-rod storage rack that is a separate part number from the 3-rod 325613-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the rack mounted?\u003c\/strong\u003e The Sea-Dog 325613-1 is a wall-mount rack that installs using the included #8 FH fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 325613-1 made in the USA?\u003c\/strong\u003e Yes, the Sea-Dog 325613-1 rod storage rack is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the 325613-1 rod rack?\u003c\/strong\u003e The UPC for the Sea-Dog 325613-1 rod storage rack is 035514325714.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988664103131,"sku":"S-D-325613-1","price":17.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8009.jpg?v=1784426831"},{"product_id":"sea-dog-325615-1-rod-storage-rack-5-rod-flush-mount-uv-resistant-polypropylene-with-soft-foam-inserts","title":"Sea-Dog 325615-1 Flush-Mount Rod Storage Rack, Holds 5 Fishing Rods","description":"\u003cp\u003eThe Sea-Dog 325615-1 is a flush-mount rod storage rack built to keep five fishing rods secure and organized aboard your boat. Each rod channel is lined with a soft foam insert that cushions the rod blank and reduces the risk of damage from vibration, chafing, or rough seas while underway. The rack itself is constructed of UV-resistant injection molded polypropylene, a material chosen for its resistance to fading, cracking, and degradation from prolonged sun and saltwater exposure, making it suited to long-term marine use.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the rack mounts flush to a wall, gunwale, or cabin surface using #8 FH (flat head) fasteners, which are included in the box, so no separate hardware purchase is required. The 325615-1 is the 5-rod version in Sea-Dog's rod storage rack lineup; a related part, the 325613, is built to the same design but holds 3 rods, so boaters with smaller rod collections or tighter mounting spaces have a matching option under a different part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 325615-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Rod Holders:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Type:\u003c\/strong\u003e Soft foam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-resistant injection molded polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 11-3\/8 x 4-1\/4 x 4-1\/4 x 1-5\/8 x 2-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #8 FH (flat head), included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Flush-mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.67 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514325844\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many rods does the Sea-Dog 325615-1 hold?\u003c\/strong\u003e The 325615-1 holds 5 fishing rods, each secured in its own soft foam-lined channel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this rod rack made of?\u003c\/strong\u003e It is constructed of UV-resistant injection molded polypropylene, a material chosen to resist fading and cracking from sun and saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the rack come with mounting hardware?\u003c\/strong\u003e Yes, the Sea-Dog 325615-1 installs with #8 FH (flat head) fasteners that are included in the package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 325615-1 rod rack mounted?\u003c\/strong\u003e This rack is a flush-mount design, installed directly against a wall, gunwale, or cabin surface using the included #8 FH fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 325615-1?\u003c\/strong\u003e The rack measures 11-3\/8 inches by 4-1\/4 inches by 4-1\/4 inches by 1-5\/8 inches by 2-7\/16 inches across its mounting profile.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this rod storage rack weigh?\u003c\/strong\u003e The Sea-Dog 325615-1 weighs 0.67 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the rods rattle or get damaged in this rack?\u003c\/strong\u003e No, each of the 5 rod channels in the 325615-1 has a soft foam insert that cushions the rod and reduces damage from vibration or rough seas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a version of this rack for fewer rods?\u003c\/strong\u003e Yes, Sea-Dog offers the 325613 as a 3-rod version of this same rack design; it is a separate part number from the 5-rod 325615-1, so order the correct one for your rod count.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 325615-1 rod rack UV resistant?\u003c\/strong\u003e Yes, it is molded from UV-resistant polypropylene, making it suitable for long-term exposure on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the 325615-1?\u003c\/strong\u003e The package includes the 5-rod Sea-Dog storage rack with soft foam inserts and the #8 FH fasteners needed for flush-mount installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this rack be mounted indoors, such as in a garage?\u003c\/strong\u003e The Sea-Dog 325615-1 is a flush-mount rod rack designed for boat installation with included #8 FH fasteners, and its UV-resistant polypropylene construction also holds up in other flush-mount storage settings.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988664135899,"sku":"S-D-325615-1","price":19.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8009_dffbdd8a-ddac-4ebc-a51f-0a3f58685266.jpg?v=1784426871"},{"product_id":"sea-dog-326510-3-fillet-prep-table-with-gimbaled-rod-holder-mount-medium-20-in-x-12-5-8-in-uv-stabilized-polypropylene","title":"Sea-Dog 326510-3 Medium Fillet Table with Gimbaled Rod Holder Mount, 20 x 20 x 12 Inches","description":"\u003cp\u003eThe Sea-Dog 326510-3 is a medium-size fillet table built for cleaning and preparing catch right on the boat or dock. It has a solid one-piece construction made of high-density polypropylene that is UV stabilized, so it resists sun, saltwater, and repeated cleaning without cracking or fading over time. The table comes with a built-in, easily adjustable, multi-position gimbaled rod holder mounting system that folds flat when not in use, making it easy to store aboard. The work surface also includes accessible knife and pliers holders, along with a hose holder and towel bar for keeping tools and cleanup supplies within reach while you work.\u003c\/p\u003e\u003cp\u003eThis fillet table measures 20 inches deep by 20 inches wide by 12 inches high, with an extended length of 20 inches, and it weighs 6.4 pounds, making it manageable to mount, remove, or move around the boat as needed. No assembly is required. For boaters who want to expand mounting options beyond the built-in rod holder, the table is also compatible with the separately sold Sea-Dog 326598-1 Gimbaled Rod Holder Mounting Accessory, which uses the same table mounting system and is designed to work across Sea-Dog's fillet table lineup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 326510-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Bait \u0026amp; Filet Table\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 20 inches D x 20 inches W x 12 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Length:\u003c\/strong\u003e 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polypropylene, UV stabilized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Holder Mount:\u003c\/strong\u003e Multi-position gimbaled, folds flat for storage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional Features:\u003c\/strong\u003e Knife and pliers holders, hose holder, towel bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Accessory Compatibility:\u003c\/strong\u003e Accepts the Sea-Dog 326598-1 Gimbaled Rod Holder Mounting Accessory (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514326711\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal boat-mount fillet table; not vehicle- or engine-specific. Compatible with the separately sold Sea-Dog 326598-1 Gimbaled Rod Holder Mounting Accessory.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 326510-3 fillet table used for?\u003c\/strong\u003e It is a boat-mounted fillet table designed for cleaning and preparing fish, with a built-in gimbaled rod holder mount and tool holders for knives, pliers, a hose, and a towel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 326510-3 fillet table come with a rod holder mount?\u003c\/strong\u003e Yes, it includes a built-in, multi-position gimbaled rod holder mounting system that folds flat for storage when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 326510-3 fillet table?\u003c\/strong\u003e The table measures 20 inches deep by 20 inches wide by 12 inches high, with an extended length of 20 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 326510-3 weigh?\u003c\/strong\u003e The Sea-Dog 326510-3 fillet table weighs 6.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 326510-3 fillet table made of?\u003c\/strong\u003e It is constructed of high-density polypropylene that is UV stabilized, giving it solid one-piece durability for outdoor marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 326510-3 fillet table suitable for outdoor use?\u003c\/strong\u003e Yes, the UV-stabilized polypropylene construction of the 326510-3 is built for outdoor, on-the-water use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 326510-3 fillet table require assembly?\u003c\/strong\u003e No assembly is required for the 326510-3 fillet table.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I add more rod holder mounts to the Sea-Dog 326510-3 fillet table?\u003c\/strong\u003e Yes, the 326510-3 is compatible with the separately sold Sea-Dog 326598-1 Gimbaled Rod Holder Mounting Accessory, which attaches to the table's mounting system for additional accessory mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 326598-1 mounting accessory included with the 326510-3 fillet table?\u003c\/strong\u003e No, the Sea-Dog 326598-1 Gimbaled Rod Holder Mounting Accessory is a separate part number sold on its own; it is compatible with the 326510-3 fillet table but not included with it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other tool storage features does the Sea-Dog 326510-3 fillet table have?\u003c\/strong\u003e The 326510-3 includes accessible knife and pliers holders as well as a hose holder and towel bar built into the table.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 326510-3 fillet table?\u003c\/strong\u003e The UPC for the Sea-Dog 326510-3 fillet table is 035514326711.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988664201435,"sku":"S-D-326510-3","price":139.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6033.jpg?v=1784426961"},{"product_id":"sea-dog-326515-3-large-fillet-prep-table-with-gimbaled-rod-holder-mount-30-in-uv-stabilized-polypropylene","title":"Sea-Dog Large Fillet Table with Rod Holder Mount 326515-3, White Polypropylene, 30 Inches Wide","description":"\u003cp\u003eThe Sea-Dog 326515-3 is a large fillet table built for cleaning and prepping your catch right on board. The tabletop measures 30 inches wide by 2.37 inches deep, stands 12.62 inches from its base to the top surface, and sits 8.62 inches off the ground at its lowest point, giving anglers a stable, elevated work surface sized for larger fish. The tabletop itself is 0.5 inches thick and is molded from UV stabilized high-density polypropylene, a material chosen for its resistance to sun, saltwater, and repeated cleaning, while the top material is polypropylene (PP) construction rated for outdoor marine use. The table folds for compact storage between trips and does not require any tools for assembly. It is finished in white and is intended for fishing use, including boat fishing and freshwater fishing.\u003c\/p\u003e\u003cp\u003eThis fillet table is designed to work with the Sea-Dog Gimbaled Rod Holder Mounting Accessory (326598-1), which attaches to the table and comes with all hardware needed for installation, including a rail mount adapter and square rail mount clamps. That accessory is built from injection molded polypropylene and stainless steel and is compatible across several Sea-Dog fillet tables, including this large model, letting you mount a rod holder or other accessory directly to the table for hands-free rigging and cleanup while underway.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 326515-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fillet Table\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 2.37 inches D x 30 inches W x 12.62 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTabletop Thickness:\u003c\/strong\u003e 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase to Top Distance:\u003c\/strong\u003e 12.62 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround to Item Distance:\u003c\/strong\u003e 8.62 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Weight Recommendation:\u003c\/strong\u003e 160 ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame Material:\u003c\/strong\u003e UV stabilized high-density polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop Material:\u003c\/strong\u003e Polypropylene (PP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoldable:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor\/Outdoor Use:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Uses:\u003c\/strong\u003e Fishing, boat fishing, freshwater fishing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514326728\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Accessory:\u003c\/strong\u003e Gimbaled Rod Holder Mounting Accessory, Sea-Dog part number 326598-1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis fillet table is a universal deck accessory and is not restricted to a specific boat make, model, or engine.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 326515-3 fillet table?\u003c\/strong\u003e The tabletop measures 2.37 inches deep by 30 inches wide, stands 12.62 inches from the base to the top surface, and is 8.62 inches off the ground, with a tabletop thickness of 0.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fillet table weigh?\u003c\/strong\u003e The Sea-Dog 326515-3 large fillet table weighs 10.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight capacity of the fillet table?\u003c\/strong\u003e The 326515-3 fillet table has a maximum weight recommendation of 160 ounces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog fillet table made from?\u003c\/strong\u003e It is built with a UV stabilized high-density polypropylene frame and a polypropylene (PP) tabletop, materials selected to hold up to sun and saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fillet table fold for storage?\u003c\/strong\u003e Yes, the Sea-Dog 326515-3 is foldable, making it easier to stow when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs any assembly required for this fillet table?\u003c\/strong\u003e No tools or assembly are required to set up the Sea-Dog 326515-3 fillet table.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I mount a rod holder to this fillet table?\u003c\/strong\u003e Yes, this fillet table is compatible with the Sea-Dog Gimbaled Rod Holder Mounting Accessory, part number 326598-1, which attaches to the table with included hardware, a rail mount adapter, and square rail mount clamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 326515-3 gimbal rod holder mount accessory?\u003c\/strong\u003e The compatible Gimbaled Rod Holder Mounting Accessory (326598-1) ships complete with all hardware needed to attach it to the fillet table, plus a rail mount adapter and square rail mount clamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the Sea-Dog fillet table come in?\u003c\/strong\u003e The 326515-3 large fillet table is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fillet table meant for indoor or outdoor use?\u003c\/strong\u003e The Sea-Dog 326515-3 is designed for outdoor use, suited to boat fishing and freshwater fishing applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fillet table fit any boat?\u003c\/strong\u003e Yes, the 326515-3 is a universal fillet table and is not limited to a specific boat make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the gimbal rod holder mount accessory sold separately from the fillet table?\u003c\/strong\u003e Yes, the Gimbaled Rod Holder Mounting Accessory is Sea-Dog part number 326598-1, a separate part from the 326515-3 fillet table, though it is built to work with it.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988664299739,"sku":"S-D-326515-3","price":178.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6033_d2b06a78-a6b5-438f-96ae-cee8b4db1a8e.jpg?v=1784427005"},{"product_id":"sea-dog-326520-3-fillet-prep-table-with-round-tube-rail-mount-20-medium-fits-3-4-to-1-1-4-tubing","title":"Sea-Dog Fillet \u0026 Prep Table with Round Rail Mount, Medium 20 Inch, Fits 3\/4-1-1\/4 Inch Tubing","description":"\u003cp\u003eThe Sea-Dog Fillet \u0026amp; Prep Table (326520-3) is a Medium, 20 inch boat-mounted work surface designed for filleting catch and general prep work at the rail. It is molded from a solid one-piece, UV-stabilized high-density polypropylene construction, which resists cracking and fading in sun and saltwater exposure while keeping maintenance simple - the surface wipes clean and needs no sealing or refinishing over time.\u003c\/p\u003e\u003cp\u003eThe table mounts to round rail tubing from 3\/4 inch up to 1-1\/4 inch in diameter using the included rail mount adapter (326599-1) and a pair of rail mount clamps (327199-1), along with all necessary assembly hardware, so no separate mounting hardware purchase is required. The work surface measures 20 inches wide by 12-5\/8 inches deep, with additional table dimensions of 13-1\/2 inches and 2 inches as specified by the manufacturer. Built into the table are easily accessible holders for a fillet knife and pliers, keeping tools within reach while working. Knives and pliers themselves are not included.\u003c\/p\u003e\u003cp\u003eThis Medium size table (326520-3) is intended for anglers who want a dedicated, permanently mountable fillet and bait prep station on a boat with round rail tubing in the supported diameter range. A Large 30 inch version (326525-3) is also available as a separate part for boats needing more prep surface.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 326520-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fillet \u0026amp; Prep Table\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-stabilized high-density polypropylene, injection molded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid one-piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size:\u003c\/strong\u003e Medium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth (A):\u003c\/strong\u003e 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth (B):\u003c\/strong\u003e 12-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 13-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Tubing Diameter:\u003c\/strong\u003e 3\/4 inch to 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.50 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware Included:\u003c\/strong\u003e Rail mount adapter (326599-1), rail mount clamps (327199-1, pair), and all assembly hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514326780\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMounts to round rail tubing measuring 3\/4 inch to 1-1\/4 inch in diameter\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rail tubing does the Sea-Dog 326520-3 fillet table fit?\u003c\/strong\u003e It mounts to round rail tubing ranging from 3\/4 inch up to 1-1\/4 inch in diameter, using the rail mount adapter and clamps included with the 326520-3 table.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 326520-3 fillet table made of?\u003c\/strong\u003e It is made from solid one-piece, UV-stabilized high-density polypropylene, a construction chosen for long life and easy maintenance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is the Medium Sea-Dog fillet table?\u003c\/strong\u003e The Medium table (326520-3) measures 20 inches wide by 12-5\/8 inches deep, with additional listed dimensions of 13-1\/2 inches and 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 326520-3 fillet table come with mounting hardware?\u003c\/strong\u003e Yes, the mounting system for the Sea-Dog 326520-3 includes a rail mount adapter (326599-1), a pair of rail mount clamps (327199-1), and all assembly hardware needed to install it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre a knife and pliers included with this fillet table?\u003c\/strong\u003e No, the Sea-Dog 326520-3 fillet table includes accessible knife and pliers holders built into the surface, but the knife and pliers themselves are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 326520-3 fillet table weigh?\u003c\/strong\u003e The Medium Sea-Dog fillet table (326520-3) weighs 3.50 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Sea-Dog 326520-3 and 326525-3 fillet tables?\u003c\/strong\u003e The 326520-3 is the Medium table at 20 inches wide, while the 326525-3 is a Large table at 30 inches wide; both share the same 12-5\/8 inch depth and mount to the same 3\/4 inch to 1-1\/4 inch round rail tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fillet table be used on square rail tubing?\u003c\/strong\u003e The 326520-3 mounting system is designed for round tubing from 3\/4 inch to 1-1\/4 inch in diameter; it is not listed as compatible with square rail tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog fillet table resistant to sun and saltwater exposure?\u003c\/strong\u003e Yes, the 326520-3 table's UV-stabilized high-density polypropylene construction is built for long life and easy maintenance in marine, sun-exposed conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many of these fillet tables come in a package?\u003c\/strong\u003e The Sea-Dog 326520-3 fillet table ships in a standard pack of 1 each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fillet table have a hose holder or towel bar?\u003c\/strong\u003e The Large Sea-Dog fillet table features an additional hose holder and towel bar; these extra features are noted for the Large table rather than the Medium 326520-3.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988664496347,"sku":"S-D-326520-3","price":126.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6342.png?v=1784427047"},{"product_id":"sea-dog-326525-3-large-fillet-prep-table-round-rail-mount-30-x-12-5-8-fits-3-4-to-1-1-4-tubing","title":"Sea-Dog Line Large Fillet and Prep Table, Rail Mount, 326525-3, 30 Inch Polypropylene","description":"\u003cp\u003eThe Sea-Dog Line Large Fillet and Prep Table (326525-3) is a rail-mounted work surface built for cleaning and preparing catch right at the boat's rail. It is molded from a single piece of UV stabilized high density polypropylene, giving it a solid, one-piece construction that resists cracking, fading, and flexing under repeated use while keeping maintenance simple since there are no seams or fasteners on the work surface itself to trap residue.\u003c\/p\u003e\u003cp\u003eThis is the Large size table, measuring 30 inches wide by 12-5\/8 inches deep, and it mounts to round rail tubing from 3\/4 inch to 1-1\/4 inch in diameter. The mounting system includes a rail mount adapter (326599-1) and a pair of rail mount clamps (327199-1), along with all the hardware needed for assembly, so the table can be installed on and removed from the boat's rail as needed. The work surface is laid out with easily accessible knife and pliers holders for keeping tools within reach while working, and because this is the Large table it also adds a hose holder and a towel bar that the smaller Medium table (326520-3) does not include. Knives and pliers are not included with the table. A Proposition 65 warning applies to this product.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog Line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 326525-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fillet and Prep Table, Rail Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size:\u003c\/strong\u003e Large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 30 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 12-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Tubing Diameter:\u003c\/strong\u003e 3\/4 inch to 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV stabilized high density polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Rail mount adapter (326599-1), rail mount clamps (327199-1, pair), assembly hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog Line 326525-3 fillet table?\u003c\/strong\u003e The 326525-3 is the Large fillet and prep table, measuring 30 inches wide by 12-5\/8 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat round tubing does this rail mount table fit?\u003c\/strong\u003e It fits round rail tubing from 3\/4 inch up to 1-1\/4 inch in diameter, using the included rail mount adapter and clamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 326525-3 table for mounting it?\u003c\/strong\u003e Mounting hardware includes a rail mount adapter (326599-1), a pair of rail mount clamps (327199-1), and all assembly hardware needed to attach the table to the rail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre knives and pliers included with this fillet table?\u003c\/strong\u003e No, knives and pliers are not included with the Sea-Dog Line 326525-3 table; the table only provides holders for them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Large Sea-Dog Line fillet table weigh?\u003c\/strong\u003e The 326525-3 Large fillet and prep table weighs 9.45 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the fillet table made of?\u003c\/strong\u003e It is made of UV stabilized high density polypropylene, injection molded as a solid one-piece construction for long life and easy maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Large and Medium Sea-Dog fillet tables?\u003c\/strong\u003e The Large table (326525-3) is 30 inches wide with a hose holder and towel bar in addition to knife and pliers holders, while the Medium table (326520-3) is 20 inches wide and pictured without those extra features.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 326525-3 fillet table include a hose holder?\u003c\/strong\u003e Yes, being the Large size table, the 326525-3 includes an additional hose holder and towel bar along with its knife and pliers holders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the fillet table be removed from the boat rail?\u003c\/strong\u003e Yes, the 326525-3 mounts to the rail using removable rail mount clamps (327199-1) and a rail mount adapter (326599-1), allowing it to be taken off when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tools are recommended to install the Sea-Dog Line fillet table?\u003c\/strong\u003e Installing the 326525-3 rail mount table typically requires a screwdriver and a wrench to secure the rail mount clamps and adapter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 326525-3 fillet table one solid piece?\u003c\/strong\u003e Yes, it uses solid one-piece construction, which is designed for long life and easy maintenance compared to multi-piece work surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many knife and pliers holders does the Large fillet table have?\u003c\/strong\u003e The Large Sea-Dog Line fillet table (326525-3) has multiple easily accessible knife and pliers holders built into the table surface, along with its added hose holder and towel bar.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988673999067,"sku":"S-D-326525-3","price":164.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6342_a210d662-9b3b-41c7-b574-2cb30c52a6cd.png?v=1784427095"},{"product_id":"sea-dog-medium-fillet-prep-table-table-only-20-in-wide-mpn-326580-3-uv-stabilized-polypropylene-with-knife-pliers-holders","title":"Sea-Dog Fillet Table 326580-3, 21 In x 17 In Polypropylene Top, Table Only","description":"\u003cp\u003eThe Sea-Dog 326580-3 is a fillet table built for cleaning and prepping catch right on the boat or dock. The tabletop is injection molded polypropylene, a material chosen for marine use because it resists saltwater, sun exposure, and staining from fish blood and oil, and it wipes clean easily after use. The table sits on a plastic frame and measures 17 inches deep by 21 inches wide by 3 inches high, giving anglers a compact, stable surface for filleting and bait prep without taking up much deck or cockpit space.\u003c\/p\u003e\u003cp\u003eThis listing is for the table only; it does not include a base, clamp, or rail mount. For boat owners who want to mount the table to an existing rail, Sea-Dog's Fillet Table Rail Mount Adapter Plate (326599-1) is built specifically to work with the 326580-3 fillet table and is sold separately, along with the Removable Rail Mount Clamp (327199-1) that attaches to the adapter plate. The table is rated for outdoor marine use and weighs 4.7 pounds, making it easy to stow when not in use. Some assembly is required; a screwdriver is recommended and the table is designed for one-person assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 326580-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 17 inches D x 21 inches W x 3 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop Material:\u003c\/strong\u003e Polypropylene (PP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor\/Outdoor Usage:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514326803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 326580-3 fillet table?\u003c\/strong\u003e The Sea-Dog 326580-3 fillet table measures 17 inches deep by 21 inches wide by 3 inches high and weighs 4.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the tabletop made of?\u003c\/strong\u003e The tabletop on the Sea-Dog 326580-3 is injection molded polypropylene, chosen for its resistance to saltwater, sun, and staining from fish blood and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the frame plastic or metal?\u003c\/strong\u003e The frame on the 326580-3 fillet table is plastic, matching the polypropylene tabletop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fillet table come with a mounting base or clamp?\u003c\/strong\u003e No. The 326580-3 is sold as the table only, without a base, clamp, or rail mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I mount the Sea-Dog 326580-3 to my boat's rail?\u003c\/strong\u003e Yes. Sea-Dog's Fillet Table Rail Mount Adapter Plate, part number 326599-1, is built to work with the 326580-3 fillet table and is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs assembly required?\u003c\/strong\u003e Yes, the 326580-3 fillet table requires some assembly. A screwdriver is the recommended tool, and it is designed for one-person assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 326580-3 fillet table rated for outdoor marine use?\u003c\/strong\u003e Yes, the Sea-Dog 326580-3 is rated for outdoor use, making it suitable for boat decks and docks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog fillet table weigh?\u003c\/strong\u003e The 326580-3 fillet table weighs 4.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sea-Dog make another fillet table model?\u003c\/strong\u003e Yes, Sea-Dog also makes the 326585-3 fillet table, a separate model that is likewise compatible with the 326599-1 rail mount adapter plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 326580-3?\u003c\/strong\u003e You receive the fillet table itself, per the Fillet Table Only designation; the rail mount adapter plate and clamp are separate purchases.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 326580-3 fillet table?\u003c\/strong\u003e The UPC for the Sea-Dog 326580-3 fillet table is 035514326803.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog product?\u003c\/strong\u003e Yes, this is the genuine Sea-Dog fillet table, manufacturer part number 326580-3.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988678324443,"sku":"S-D-326580-3","price":97.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7331.jpg?v=1784427139"},{"product_id":"sea-dog-large-fillet-prep-table-30-in-fillet-table-only-uv-stabilized-polypropylene-mpn-326585-3","title":"Sea-Dog Fillet Table Only, 30 Inch UV-Stabilized Polypropylene Bait Prep Table","description":"\u003cp\u003eThe Sea-Dog Fillet Table Only (326585-3) is a standalone bait and fish prep table built for anglers who need a stable, easy-to-clean work surface on the boat, dock, or at the cleaning station. The tabletop is molded from UV stabilized high-density polypropylene, a material chosen for its resistance to sun exposure, saltwater spray, and repeated washdowns, so the table holds up to daily use without cracking, fading, or absorbing odors the way wood or untreated plastic can. The 3-inch-thick top gives the surface rigidity for cutting and cleaning tasks while keeping the overall unit lightweight enough to move and store.\u003c\/p\u003e\u003cp\u003eThis is the fillet table only, measuring 33 inches wide by 16.5 inches deep by 3 inches high, and it carries a maximum weight recommendation of 50 pounds. It requires assembly and mounting hardware and tools (a screwdriver is recommended) are needed but not included. The table's dimensions and mounting pattern are also referenced by Sea-Dog's rail mount adapter plate accessory, which is designed to work with this fillet table when adding it to a boat rail system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 326585-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Width:\u003c\/strong\u003e 33 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Depth:\u003c\/strong\u003e 16.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Height:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTabletop Thickness:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Weight Recommendation:\u003c\/strong\u003e 50 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV stabilized high-density polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multicoloured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Filleting, fishing and boating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor\/Outdoor Usage:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514326810\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog Fillet Table Only 326585-3?\u003c\/strong\u003e The table measures 33 inches wide by 16.5 inches deep by 3 inches high, with a tabletop thickness of 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can this fillet table hold?\u003c\/strong\u003e The Sea-Dog Fillet Table Only (326585-3) has a maximum weight recommendation of 50 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog fillet table made of?\u003c\/strong\u003e It is made of UV stabilized high-density polypropylene, chosen for resistance to sun, saltwater, and repeated cleaning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fillet table come with a mounting base or stand?\u003c\/strong\u003e No, part number 326585-3 is the fillet table only; it does not include a base, legs, or mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs assembly required for this fillet table?\u003c\/strong\u003e Yes, assembly is required, and a screwdriver is the recommended tool for putting it together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog Fillet Table Only weigh?\u003c\/strong\u003e The table weighs 7.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fillet table be mounted to a boat rail?\u003c\/strong\u003e Yes, Sea-Dog's rail mount adapter plate accessory is designed to work with this fillet table (326585-3) for rail mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog fillet table suitable for outdoor use?\u003c\/strong\u003e Yes, this fillet table is designed for outdoor use on boats and docks in fishing and boating applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog Fillet Table Only?\u003c\/strong\u003e It is listed as multicoloured.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fillet table hold up to regular saltwater exposure?\u003c\/strong\u003e The UV stabilized high-density polypropylene construction of part 326585-3 is built to resist fading, cracking, and saltwater exposure with regular use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog Fillet Table Only 326585-3?\u003c\/strong\u003e The UPC is 035514326810.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988680290523,"sku":"S-D-326585-3","price":100.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7331_da8a071b-3a0d-44df-8887-55346e7ce99b.jpg?v=1784427186"},{"product_id":"sea-dog-326598-1-gimbaled-rod-holder-mounting-accessory-fits-sea-dog-fillet-tables-326510-3-326515-3-326580-3-326585-3-includes-all-hardware","title":"Sea-Dog Gimbaled Rod Holder Mounting Accessory 326598-1 for Sea-Dog Fillet Tables 326510-3, 326515-3, 326580-3, 326585-3","description":"\u003cp\u003eThe Sea-Dog Gimbaled Rod Holder Mounting Accessory (326598-1) is a mounting bracket designed to attach a rod holder or other compatible accessory to a Sea-Dog fillet table. It is built specifically to work with the Sea-Dog fillet tables 326510-3, 326515-3, 326580-3, and 326585-3, giving anglers a way to add a rod holder or additional gear directly to their table setup rather than mounting separately on the gunwale or rail.\u003c\/p\u003e\u003cp\u003eThe mount is constructed of injection molded polypropylene combined with stainless steel hardware, giving it corrosion resistance for a marine environment while keeping the assembly lightweight. It comes complete with all hardware necessary to attach the mount to the table, including a rail mount adapter and square rail mount clamps, so no separate hardware purchase is needed for installation onto a compatible fillet table.\u003c\/p\u003e\u003cp\u003eBecause the mounting point is a standard fitting, the accessory can be used to hold a variety of gear beyond just a rod holder, making it a flexible mounting solution for anyone who has already installed one of the compatible Sea-Dog fillet tables.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 326598-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Gimbaled Rod Holder Mounting Accessory\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Polypropylene\/Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 1-13\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 2-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e 1\/4 inch FH (flat head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Rail Mount Adapter and Square Rail Mount Clamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514326858\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStd. Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSea-Dog Fillet Table 326510-3\u003c\/li\u003e\n\u003cli\u003eSea-Dog Fillet Table 326515-3\u003c\/li\u003e\n\u003cli\u003eSea-Dog Fillet Table 326580-3\u003c\/li\u003e\n\u003cli\u003eSea-Dog Fillet Table 326585-3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat fillet tables does the Sea-Dog 326598-1 rod holder mount fit?\u003c\/strong\u003e The Sea-Dog 326598-1 gimbaled rod holder mounting accessory works with Sea-Dog fillet tables 326510-3, 326515-3, 326580-3, and 326585-3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this mounting accessory?\u003c\/strong\u003e The 326598-1 comes complete with all hardware needed to attach it to a compatible fillet table, including a rail mount adapter and square rail mount clamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the mount made from?\u003c\/strong\u003e It is constructed of injection molded polypropylene combined with stainless steel hardware for corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the rod holder mount weigh?\u003c\/strong\u003e The Sea-Dog 326598-1 weighs 2.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the mounting bracket?\u003c\/strong\u003e The mount measures 1-13\/16 inches by 2-15\/16 inches by 12 inches, with a 1\/4 inch flat head fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this mount be used for accessories other than a rod holder?\u003c\/strong\u003e Yes, the mounting point on the 326598-1 is a standard fitting that can be used to attach a variety of accessories in addition to a rod holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 326598-1 come with mounting hardware, or is that purchased separately?\u003c\/strong\u003e All hardware necessary to attach the mount to the fillet table is included with the 326598-1, so no additional hardware purchase is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this mount sold as one unit or in a pack?\u003c\/strong\u003e The Sea-Dog 326598-1 gimbaled rod holder mount is sold individually, one per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this mount fit a fillet table that is not one of the listed Sea-Dog models?\u003c\/strong\u003e The 326598-1 is designed to work on Sea-Dog fillet tables 326510-3, 326515-3, 326580-3, and 326585-3; fit on other tables is not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Sea-Dog Gimbaled Rod Holder Mounting Accessory (326598-1) has UPC 035514326858.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988680323291,"sku":"S-D-326598-1","price":84.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8218.jpg?v=1784427221"},{"product_id":"sea-dog-rail-mount-rod-holder-white-polypropylene-front-adjust-screw-fits-7-8-in-to-1-in-rail-tubing-mpn-327161-1","title":"Sea-Dog Rail Mount Rod Holder 327161-1, White Polypropylene, Fits 7\/8 to 1 Inch Round Rail Tubing","description":"\u003cp\u003eThe Sea-Dog Rail Mount Rod Holder (327161-1) is a clamp-on fishing rod holder built to mount directly onto round rail tubing from 7\/8 inch to 1 inch in diameter, making it a straightforward add-on for boats with standard round rails. It is constructed of injection molded polypropylene in white, a material chosen for its resistance to corrosion and UV exposure in a marine environment. The holder accommodates fishing rods up to 1-3\/4 inches in diameter, covering the vast majority of rod butts and reel seats used by anglers.\u003c\/p\u003e\u003cp\u003eA key feature of this rod holder is its front mount adjustment screw, which lets you tighten or loosen the clamp's grip on the rail without having to disassemble the mounting bracket. This makes it fast to install, remove, or reposition on the rail as needed. Because the rod sits in an open holder rather than a locked mount, Sea-Dog recommends using a leash on the rod and\/or reel as a safety backup while the rod holder is in use. This is a rail-mount accessory rather than an OEM replacement part, so it installs on any compatible round rail without requiring drilling into the boat's gunwale or hull.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 327161-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Diameter Capacity:\u003c\/strong\u003e Up to 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Tubing Diameter:\u003c\/strong\u003e 7\/8 inch to 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 11-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Rail Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Front mount adjustment screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.506 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rail does the Sea-Dog 327161-1 rod holder fit?\u003c\/strong\u003e It fits round rail tubing from 7\/8 inch to 1 inch in diameter, so measure your rail before ordering to confirm it falls in that range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum rod diameter this holder can hold?\u003c\/strong\u003e The 327161-1 rod holder accommodates fishing rods up to 1-3\/4 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 327161-1?\u003c\/strong\u003e This version is white. Sea-Dog also makes the same rod holder in black under a different part number for buyers who want to match a dark rail or hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the rod holder made from?\u003c\/strong\u003e It is constructed of injection molded polypropylene, chosen for its resistance to corrosion and UV exposure on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you adjust or tighten the rod holder on the rail?\u003c\/strong\u003e A front mount adjustment screw lets you tighten or loosen the clamp's grip on the rail directly from the front, without disassembling the mounting bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the rod holder lock the rod in place?\u003c\/strong\u003e No. It is an open rail-mount holder, so Sea-Dog recommends using a leash on the rod and\/or reel as a safety backup while it is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fit a square rail?\u003c\/strong\u003e No, the 327161-1 is designed for round rail tubing (7\/8 inch to 1 inch). Sea-Dog offers a separate square rail mount rod holder, part number 327166-1, for 1-1\/4 inch square rails.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the mounting bracket?\u003c\/strong\u003e The 327161-1 rod holder measures 11-3\/4 inches for dimension A and 1-3\/4 inches for dimension B.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the rod holder weigh?\u003c\/strong\u003e The Sea-Dog 327161-1 rod holder weighs 0.506 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs drilling required to install this rod holder?\u003c\/strong\u003e No drilling into the boat is needed; the 327161-1 clamps onto existing round rail tubing using its adjustment screw.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this rod holder be used on a pontoon boat?\u003c\/strong\u003e It works on any boat with a compatible round rail from 7\/8 inch to 1 inch in diameter; for square pontoon rails, use Sea-Dog's square rail version (327166-1) instead.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988741337307,"sku":"S-D-327161-1","price":24.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8038.jpg?v=1784428539"},{"product_id":"sea-dog-327166-1-square-rail-mount-rod-holder-white-polypropylene-fits-1-1-4-square-rails-holds-rods-to-1-3-4","title":"Sea-Dog White Poly Rail Mount Rod Holder, Fits 1-1\/4 Inch Square Rails, Rods up to 1-3\/4 Inch (327166-1)","description":"\u003cp\u003eThe Sea-Dog 327166-1 is a rail mount rod holder built from injection molded polypropylene in white, designed specifically to fit 1-1\/4 inch square rails such as those found on pontoon boats. It accommodates rods up to 1-3\/4 inches in diameter, making it a quick and easy way to add fishing rod storage to a pontoon or other boat equipped with square railing. A front mount adjustment screw lets you tighten or loosen the holder without disassembling the rail mount brackets, so positioning and removal stay simple. The polypropylene construction resists corrosion, making it well suited to constant exposure to sun, salt, and moisture on the water. Overall length is 11-3\/4 inches with a 1-3\/4 inch capacity dimension, and the mount is sized to grip 1-1\/4 inch by 1-1\/4 inch square tubing securely. Because rail mount rod holders position the rod outboard of the boat, a leash on the rod and\/or reel is recommended when using this holder to prevent loss overboard. This is the polypropylene, square-rail version of Sea-Dog's rail mount rod holder line; a formed and cast 316 stainless steel round-rail version is also available as a separate part for boats with round tubing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 327166-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Rail Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Tubing Size:\u003c\/strong\u003e 1-1\/4 inch x 1-1\/4 inch square rail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Diameter Capacity:\u003c\/strong\u003e up to 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 11-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.612 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 8 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514327732\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size rail does the Sea-Dog 327166-1 rod holder fit?\u003c\/strong\u003e The 327166-1 is designed to fit 1-1\/4 inch by 1-1\/4 inch square rails, the type commonly found on pontoon boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum rod diameter this holder can accommodate?\u003c\/strong\u003e This rail mount rod holder can accommodate rods up to 1-3\/4 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 327166-1 rod holder made from?\u003c\/strong\u003e It is constructed of injection molded polypropylene, a corrosion-resistant plastic suited to marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the mounting bracket need to be disassembled to adjust the rod holder?\u003c\/strong\u003e No. The 327166-1 features a front mount adjustment screw that allows the angle to be adjusted without disassembling the rail mount brackets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this rod holder weigh?\u003c\/strong\u003e The Sea-Dog 327166-1 weighs 0.612 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 327166-1 rod holder?\u003c\/strong\u003e It is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a leash recommended when using this rod holder?\u003c\/strong\u003e Yes, because rail mount rod holders position the rod outboard of the boat, a leash on the rod and\/or reel is recommended when using the 327166-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog 327166-1 different from Sea-Dog's stainless steel rail mount rod holder?\u003c\/strong\u003e The 327166-1 is polypropylene and sized for 1-1\/4 inch square rails with rods up to 1-3\/4 inches in diameter, while Sea-Dog's stainless steel version (327175-1) is cast 316 stainless steel sized for 7\/8 to 1 inch round tubing with rods up to 1-11\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 327166-1 rod holder?\u003c\/strong\u003e The 327166-1 measures 11-3\/4 inches for dimension A and 1-3\/4 inches for dimension B, and mounts to 1-1\/4 inch by 1-1\/4 inch square tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this rod holder suitable for pontoon boats?\u003c\/strong\u003e Yes, the Sea-Dog 327166-1 is described as a quick and easy way to add rod holders to pontoon boats equipped with 1-1\/4 inch square rails.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the standard pack quantity for the 327166-1?\u003c\/strong\u003e The 327166-1 rail mount rod holder is packed 8 each as a standard pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 327166-1 attach to the boat?\u003c\/strong\u003e It clamps onto a 1-1\/4 inch by 1-1\/4 inch square rail using a rail mount bracket with a front mount adjustment screw for tightening.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988748415195,"sku":"S-D-327166-1","price":25.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8200.jpg?v=1784428577"},{"product_id":"sea-dog-520075-1-snap-handle-drain-plug-stainless-steel-and-nitrile-rubber-fits-1-inch-drain-holes","title":"Sea-Dog Snap Handle Drain Plug, Stainless Steel, 1 Inch Diameter","description":"\u003cp\u003eThe Sea-Dog Snap Handle Drain Plug is a cam-action boat drain plug built for a quick, leak-proof seal without threading or wrenching. To install, simply turn the handle clockwise to tighten the plug into the drain hole, then fold the handle down and snap it into the locked position to set the seal. The cam mechanism lets you fine-tune sealing pressure by twisting the handle before locking it down, so you get a tight fit every time without over-torquing.\u003c\/p\u003e\u003cp\u003eConstruction is stamped stainless steel paired with a nitrile rubber seal, giving the plug corrosion resistance for saltwater and freshwater use along with a durable, flexible gasket that seals reliably against the transom drain opening. The compact folding handle design keeps the plug low-profile when locked down, reducing snag points on the hull. This part number, 520075-1, measures 1 inch at the A dimension and 1-1\/4 inches at the B dimension and does not include a tether chain.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520075-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped Stainless Steel\/Nitrile Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.11 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520218\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow does the Sea-Dog Snap Handle Drain Plug seal the drain hole?\u003c\/strong\u003e It uses a cam action: turning the handle clockwise tightens the plug into the hole, then folding the handle down and snapping it into place locks in a leak-proof seal, no threading required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is part number 520075-1 made of?\u003c\/strong\u003e This drain plug is constructed of stamped stainless steel with a nitrile rubber seal, giving it corrosion resistance along with a flexible, durable gasket surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 520075-1 drain plug?\u003c\/strong\u003e It measures 1 inch at the A dimension and 1-1\/4 inches at the B dimension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this drain plug come with a tether chain?\u003c\/strong\u003e No, part number 520075-1 does not include a chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog Snap Handle Drain Plug weigh?\u003c\/strong\u003e It weighs 0.11 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I adjust how tight the seal is on this plug?\u003c\/strong\u003e Yes, twisting the handle adjusts the pressure of the plug before you fold the handle down to lock and seal it in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 520075-1 suitable for saltwater use?\u003c\/strong\u003e The stamped stainless steel and nitrile rubber construction is corrosion resistant, making this drain plug suitable for saltwater and freshwater boating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog Snap Handle Drain Plug?\u003c\/strong\u003e This drain plug, part number 520075-1, has a gray finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many drain plugs come in an order?\u003c\/strong\u003e One Sea-Dog Snap Handle Drain Plug (part number 520075-1) is included per unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from a standard threaded drain plug?\u003c\/strong\u003e Instead of screwing a plug in and out with threads, the Sea-Dog 520075-1 uses a cam-action handle that tightens with a turn and locks down with a snap, making install and removal faster.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825682139,"sku":"S-D-520075-1","price":6.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5258.jpg?v=1784429720"},{"product_id":"sea-dog-t-handle-drain-plug-1-inch-stamped-brass-with-nitrile-rubber-seal-leak-proof-cam-lock-boat-baitwell-plug","title":"Sea-Dog T-Handle Drain Plug, 1 Inch Brass, 520080-1","description":"\u003cp\u003eThe Sea-Dog T-Handle Drain Plug (520080-1) is a 1 inch brass drain plug built to seal boat hull drain fittings against water intrusion when the boat is in the water. Turning the T-handle clockwise draws the plug tight and locks it in place; turning it counterclockwise releases it for quick removal when draining the hull, bilge, or livewell, with no tools required.\u003c\/p\u003e\u003cp\u003eThe plug body is constructed of stamped brass for corrosion and vibration resistance, paired with a nitrile rubber seal that forms a leak-proof gasket against the drain opening. The plug has a 1 inch diameter (A) and a 1-1\/4 inch overall diameter (B). It is sold individually and weighs 0.10 pounds.\u003c\/p\u003e\u003cp\u003eSea-Dog also offers this same T-Handle Drain Plug design in a 1-1\/4 inch by 1-1\/4 inch brass size (520082-1) and in stamped stainless steel (520085-1, 520086-1), so boaters can match the plug material and size to their existing hull fitting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520080-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e T-Handle Drain Plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped brass with nitrile rubber seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug Diameter (A):\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Diameter (B):\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.10 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Gold-tone brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Quarter-turn T-handle, clockwise to lock, counterclockwise to release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Sold individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520041\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 520080-1 drain plug?\u003c\/strong\u003e The 520080-1 has a 1 inch plug diameter (A) with a 1-1\/4 inch overall diameter (B).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-Handle Drain Plug made of?\u003c\/strong\u003e Sea-Dog's 520080-1 T-Handle Drain Plug is stamped brass paired with a nitrile rubber seal for a leak-proof fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the T-handle lock in place?\u003c\/strong\u003e Turn the T-handle clockwise to lock the 520080-1 plug in place, and counterclockwise to release it for removal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 520080-1 drain plug sold individually or in a pack?\u003c\/strong\u003e It is sold individually, one plug per unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sea-Dog make this drain plug in stainless steel?\u003c\/strong\u003e Yes, the same T-Handle Drain Plug design is also available in stamped stainless steel as part numbers 520085-1 and 520086-1, which are separate SKUs from the brass 520080-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 520080-1 drain plug weigh?\u003c\/strong\u003e The Sea-Dog 520080-1 T-Handle Drain Plug weighs 0.10 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC does the Sea-Dog 520080-1 drain plug use?\u003c\/strong\u003e The UPC for this product is 035514520041.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 520080-1 T-Handle Drain Plug?\u003c\/strong\u003e It has a gold-tone brass finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between part 520080 and 520080-1?\u003c\/strong\u003e Both are the same 1 inch brass T-Handle Drain Plug; 520080 is the bulk-packed version and 520080-1 is the same plug in display packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the T-Handle Drain Plug prevent leaks?\u003c\/strong\u003e Yes, the nitrile rubber seal on the 520080-1 forms a leak-proof seal when the T-handle is turned clockwise to lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a size option larger than 1 inch?\u003c\/strong\u003e Yes, Sea-Dog offers a 1-1\/4 inch by 1-1\/4 inch brass version of this T-Handle Drain Plug under part number 520082-1, a separate SKU from the 1 inch 520080-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 520080-1 drain plug carry a Proposition 65 warning?\u003c\/strong\u003e Yes, this brass T-Handle Drain Plug carries a California Proposition 65 warning for cancer and reproductive harm.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825845979,"sku":"S-D-520080-1","price":5.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8156.jpg?v=1784429727"},{"product_id":"sea-dog-520085-1-t-handle-drain-plug-1-inch-stainless-steel-with-nitrile-rubber-seal","title":"Sea-Dog T-Handle Drain Plug 520085-1, 1 Inch, Stainless Steel and Nitrile Rubber","description":"\u003cp\u003eThe Sea-Dog T-Handle Drain Plug (520085-1) is a 1 inch stamped stainless steel drain plug designed to provide a leak proof seal in boat hull drain openings. The T-handle design makes installation and removal fast and tool-free: simply turn the handle clockwise to lock the plug in place and form the seal, then turn it counter-clockwise to release it for draining. The plug body is constructed of corrosion and vibration resistant stamped stainless steel paired with a nitrile rubber seal, giving it the durability to withstand repeated exposure to fresh and salt water environments as well as the vibration common to boat hulls underway.\u003c\/p\u003e\u003cp\u003eThis drain plug is sized at 1 inch (A dimension) with a 1-1\/4 inch B dimension, and is sold individually. It is a straightforward replacement or upgrade drain plug for boats that use a 1 inch stamped stainless T-handle style plug, and pairs with Sea-Dog's broader stamped stainless drain plug and baitwell plug lineup for boats needing multiple sizes on board.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520085-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e T-Handle Drain Plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug Diameter (A):\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Diameter (B):\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel, nitrile rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.10 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520188\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 plug per pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal 1 inch drain hole application; not specific to a single boat make, model, or engine.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 520085-1 T-Handle Drain Plug?\u003c\/strong\u003e The 520085-1 is a 1 inch T-handle drain plug, with a 1-1\/4 inch overall (B) dimension on the housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you install and remove this drain plug?\u003c\/strong\u003e Turn the T-handle clockwise to lock the 520085-1 plug in place and form the seal, and turn it counter-clockwise to release it for draining.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-Handle Drain Plug made of?\u003c\/strong\u003e It is made of stamped stainless steel with a nitrile rubber seal, chosen for corrosion and vibration resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 520085-1 provide a watertight seal?\u003c\/strong\u003e Yes, the Sea-Dog T-Handle Drain Plug is designed to provide a leak proof seal when the T-handle is turned to the locked position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 520085-1 drain plug weigh?\u003c\/strong\u003e This Sea-Dog T-handle drain plug weighs 0.10 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this drain plug sold as a single unit or in a pack?\u003c\/strong\u003e The 520085-1 is sold as one plug per pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog 520085-1 drain plug?\u003c\/strong\u003e The plug's nitrile rubber seal is black, with a stainless steel T-handle body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 520085-1 resistant to vibration on a boat underway?\u003c\/strong\u003e Yes, the stamped stainless steel and nitrile rubber construction of the 520085-1 is specifically built for corrosion and vibration resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a larger size available in this same drain plug style?\u003c\/strong\u003e Sea-Dog offers a 1-1\/4 inch version of this same stamped stainless T-handle drain plug under a separate part number, for boats with a larger drain opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 520085-1 T-Handle Drain Plug?\u003c\/strong\u003e The UPC for the Sea-Dog 520085-1 T-Handle Drain Plug is 035514520188.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825878747,"sku":"S-D-520085-1","price":5.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8157.jpg?v=1784429727"},{"product_id":"sea-dog-520091-1-brass-baitwell-plug-3-8-cam-action-snap-lock-livewell-drain-plug","title":"Sea-Dog Brass Baitwell Plug, 3\/8 Inch, Cam-Action Livewell Drain Plug (520091-1)","description":"\u003cp\u003eThe Sea-Dog Baitwell Plug (520091-1) is a cam-action drain plug built to seal livewells and baitwells against leaks. Rather than relying on a plain friction fit, the plug uses a snap lock handle: turn the handle clockwise to tighten the plug against the drain opening, then snap the handle down flat to lock it in place for a leak-proof seal. The snap lock handle is adjustable, so the plug can be tightened to fit most baitwells and livewells currently in use rather than requiring an exact single bore size.\u003c\/p\u003e\u003cp\u003eConstruction is durable stamped brass combined with a nitrile rubber seal, a pairing chosen for corrosion resistance in wet marine environments and a reliable, long-lasting seal against the drain fitting. This particular plug measures 3\/8 inch (the A dimension) with an 11\/16 inch base (the B dimension), and weighs 0.084 pounds. It is part of a Sea-Dog baitwell plug lineup offered in multiple plug sizes, each sold under its own part number, so boaters can match the plug to the specific drain opening they are sealing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520091-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug Diameter (A):\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Diameter (B):\u003c\/strong\u003e 11\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.084 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped brass and nitrile rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5 x 3 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Cam-action, adjustable snap lock handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520126\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal-fit baitwell\/livewell drain plug; the adjustable snap lock handle allows it to fit most baitwells and livewells currently available rather than one specific boat model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 520091-1 baitwell plug?\u003c\/strong\u003e The Sea-Dog 520091-1 baitwell plug has a 3\/8 inch plug diameter (the A dimension) and an 11\/16 inch base diameter (the B dimension).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cam-action baitwell plug work?\u003c\/strong\u003e Turn the handle on the 520091-1 plug clockwise to tighten it against the drain opening, then snap the handle down flat to lock it in place for a leak-proof seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog baitwell plug made of?\u003c\/strong\u003e It is constructed of durable stamped brass with a nitrile rubber seal, a combination chosen for corrosion resistance in wet marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this baitwell plug weigh?\u003c\/strong\u003e The Sea-Dog 520091-1 baitwell plug weighs 0.084 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this plug fit my livewell or baitwell?\u003c\/strong\u003e Yes, in most cases. The 520091-1 plug's snap lock handle is adjustable, letting it fit most baitwells and livewells currently available rather than a single specific model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this plug sold as a single piece or a pair?\u003c\/strong\u003e The 520091-1 is the individual plug part number; Sea-Dog also packages this baitwell plug line in bulk and paired quantities for retail and marine supply stock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I replace an old or leaking baitwell plug?\u003c\/strong\u003e Remove the worn plug from the drain opening, insert the Sea-Dog 520091-1 in its place, turn the handle clockwise to tighten the seal, and snap the handle down to lock it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sea-Dog make this baitwell plug in other sizes?\u003c\/strong\u003e Yes, the 3\/8 inch 520091-1 is part of a sized lineup that also includes 1\/2 inch, 5\/8 inch, 3\/4 inch, and 7\/8 inch versions, each sold under its own separate part number so you can match the plug to your drain opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog baitwell plug corrosion resistant?\u003c\/strong\u003e Yes, the stamped brass and nitrile rubber construction of the 520091-1 is built to resist corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Sea-Dog 520091-1 baitwell plug carries UPC 035514520126.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog part?\u003c\/strong\u003e Yes, part number 520091-1 is a genuine Sea-Dog baitwell plug, not a generic replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of this plug?\u003c\/strong\u003e The 520091-1 baitwell plug ships in packaging measuring 5 x 3 x 1 inches.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825911515,"sku":"S-D-520091-1","price":5.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8152.jpg?v=1784429731"},{"product_id":"sea-dog-520092-1-brass-baitwell-plug-1-2-inch-cam-action-livewell-drain-plug-pair","title":"Sea-Dog Brass Baitwell Plug 1\/2 Inch, Cam-Action Drain Plug for Livewells and Baitwells, Pack of 2","description":"\u003cp\u003eThe Sea-Dog Baitwell Plug is a stamped brass and nitrile rubber drain plug designed to seal livewell and baitwell drain holes on boats. It uses a cam-action, snap-lock handle for quick, leak-proof installation: turn the handle clockwise to tighten the plug against the drain opening, then snap the handle down flat to lock it in place. The snap-lock handle is adjustable, allowing the plug to tighten and seal properly across most baitwells currently available, so a single plug design can accommodate slight variations in drain hole fit.\u003c\/p\u003e\u003cp\u003eThis version, part number 520092-1, is the 1\/2 inch diameter size and is sold as a pack of 2 plugs. The plug body measures 1\/2 inch (dimension A) with an overall handle\/flange dimension of 11\/16 inch (dimension B). Construction is durable stamped brass paired with a nitrile rubber seal for corrosion resistance and a reliable watertight seal in wet livewell and baitwell environments. Sea-Dog also offers this same plug in 3\/8 inch, 5\/8 inch, 3\/4 inch, and 7\/8 inch diameters under related part numbers for other drain hole sizes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520092-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug Diameter (A):\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange\/Handle Dimension (B):\u003c\/strong\u003e 11\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped brass and nitrile rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 2 (pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Cam-action snap-lock handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520133\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits most baitwells and livewells with a 1\/2 inch drain hole; the adjustable snap-lock handle accommodates slight variation across baitwell drain fittings.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size drain hole does the Sea-Dog 520092-1 baitwell plug fit?\u003c\/strong\u003e The Sea-Dog 520092-1 plug has a 1\/2 inch diameter (dimension A) with an 11\/16 inch handle\/flange dimension (dimension B), sized for a 1\/2 inch livewell or baitwell drain hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many plugs come in this package?\u003c\/strong\u003e Part number 520092-1 is sold as a pack of 2 brass baitwell plugs, unlike the bulk single-unit version of the same 1\/2 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the plug made of?\u003c\/strong\u003e This baitwell plug is constructed of durable stamped brass with a nitrile rubber seal, providing corrosion resistance and a watertight fit in livewells and baitwells.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cam-action locking mechanism work?\u003c\/strong\u003e To install the Sea-Dog 520092-1, turn the handle clockwise to tighten the plug into the drain opening, then snap the handle down flat to lock it in place and secure the seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the handle adjustable for different baitwell fittings?\u003c\/strong\u003e Yes, the snap-lock handle on this Sea-Dog baitwell plug is adjustable to tighten the plug size to fit most baitwells currently available.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this baitwell plug weigh?\u003c\/strong\u003e The Sea-Dog 520092-1 pack weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this leak once installed?\u003c\/strong\u003e No, the nitrile rubber seal combined with the cam-action snap-lock handle is designed to create a leak-proof seal for livewells and baitwells once properly tightened.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the same as the standard 520092 part number?\u003c\/strong\u003e Part number 520092 is the base 1\/2 inch plug, while 520092-1 is the same 1\/2 inch plug packaged as a pair (2 plugs) rather than sold individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other sizes are available if 1\/2 inch does not fit my drain hole?\u003c\/strong\u003e The same Sea-Dog baitwell plug design is also available in 3\/8 inch, 5\/8 inch, 3\/4 inch, and 7\/8 inch diameters, each under its own part number, so measure your drain hole before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this plug be used in saltwater applications?\u003c\/strong\u003e Yes, the stamped brass and nitrile rubber construction of the 520092-1 baitwell plug is intended for marine livewell and baitwell use.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825944283,"sku":"S-D-520092-1","price":5.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8152_da4994e1-55d8-43be-8bb6-17deaa48fd90.jpg?v=1784429738"},{"product_id":"sea-dog-snap-handle-drain-plug-1-in-stamped-brass-cam-action-boat-drain-plug-no-chain-mpn-520070-1","title":"Sea-Dog Snap Handle Drain Plug 1 Inch Brass, No Retention Chain, 520070-1","description":"\u003cp\u003eThe Sea-Dog Snap Handle Drain Plug (520070-1) is a cam-action brass drain plug designed for a fast, leak-proof seal in boat transom and hull drain holes. Rather than threading the plug in and out, the snap handle design lets you simply turn the handle clockwise to tighten the plug against the drain hole, then snap the handle down flat to lock it in place. This cam mechanism speeds up launching and hauling out, since there is no repeated threading required once the plug is fitted.\u003c\/p\u003e\u003cp\u003eConstruction is durable stamped brass paired with a nitrile rubber seal, giving a corrosion-resistant plug with a reliable watertight gasket. This version of the 520070 series does not include a retention chain, so the plug is a standalone unit with no attached lanyard or tether. It is sized with a 1 inch drain hole diameter and a 1-1\/4 inch overall body diameter, making it suited to boats built with a 1 inch transom drain fitting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520070-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Snap Handle Drain Plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrain Hole Diameter (A):\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Body Diameter (B):\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass and nitrile rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetention Chain:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.11 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520034\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits boat drain holes sized for a 1 inch snap handle drain plug.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size drain hole does the Sea-Dog 520070-1 fit?\u003c\/strong\u003e The 520070-1 is sized for a 1 inch drain hole diameter, with an overall body diameter of 1-1\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this drain plug come with a retention chain?\u003c\/strong\u003e No, the 520070-1 does not include a retention chain. Sea-Dog also makes a version with a chain under a different part number, so check that you are ordering the correct one if you need a tethered plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog snap handle drain plug made of?\u003c\/strong\u003e It is made of stamped brass with a nitrile rubber seal, giving the 520070-1 a corrosion-resistant body and a watertight gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the snap handle mechanism work?\u003c\/strong\u003e Turn the handle clockwise to tighten the plug into the drain hole, then snap the handle down flat to lock it in place, creating a leak-proof seal without repeated threading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 520070-1 easier to use than a standard threaded drain plug?\u003c\/strong\u003e Yes, the cam-action snap handle design on the 520070-1 lets you seat and lock the plug in one motion instead of threading it in fully each time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this drain plug weigh?\u003c\/strong\u003e The Sea-Dog Snap Handle Drain Plug 520070-1 weighs 0.11 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a stainless steel version of this drain plug available?\u003c\/strong\u003e Sea-Dog also makes this snap handle drain plug in stamped stainless steel under a different part number; the 520070-1 is the brass version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 520070-1?\u003c\/strong\u003e You receive one Sea-Dog Snap Handle Drain Plug, part number 520070-1, with the brass body and nitrile rubber seal assembled and ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install this drain plug myself?\u003c\/strong\u003e Yes, the 520070-1 installs by hand into a properly sized 1 inch drain hole and is tightened using the built-in snap handle, with no tools required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The UPC for the Sea-Dog Snap Handle Drain Plug 520070-1 is 035514520034.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825977051,"sku":"S-D-520070-1","price":6.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5256.jpg?v=1784429737"},{"product_id":"sea-dog-baitwell-plug-5-8-in-cam-action-brass-nitrile-livewell-drain-plug-with-adjustable-snap-lock-handle-pair","title":"Sea-Dog Baitwell Plug 5\/8 Inch, Brass and Nitrile Rubber, Part 520093-1","description":"\u003cp\u003eThe Sea-Dog Baitwell Plug, part number 520093-1, is a 5\/8 inch cam-action drain plug built to seal livewells and baitwells against leaks. Constructed of durable stamped brass with a nitrile rubber sealing element, the plug is installed by turning the handle clockwise to tighten it into the drain hole, then snapping the handle down to lock it firmly in place. The snap lock handle is adjustable, allowing it to tighten the plug to fit most baitwells currently available, so a single plug design accommodates variation in drain fitting depth and tolerance. This 5\/8 inch size plug has a hole size of 5\/8 inch and an overall dimension of 11\/16 inch, and is sold as a pair. The brass body resists corrosion in a marine environment while the nitrile rubber provides a compressible, watertight seal against the drain fitting. Because the design relies on a cam and lever rather than threads, it can be removed and reinstalled repeatedly without wear on threads, making it a practical replacement for a worn or missing baitwell drain plug. The black-finished handle is easy to spot and grip when servicing a livewell.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520093-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Size (A):\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 11\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass and Nitrile Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520140\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1 pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole does the Sea-Dog 520093-1 baitwell plug fit?\u003c\/strong\u003e The Sea-Dog Baitwell Plug 520093-1 fits a 5\/8 inch hole size, with an overall dimension of 11\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Sea-Dog 520093-1 plug seal a livewell or baitwell?\u003c\/strong\u003e It uses a cam action nitrile rubber plug that snaps shut to form a leak-proof seal; turning the handle clockwise tightens the plug and snapping the handle down locks it in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog baitwell plug made of?\u003c\/strong\u003e Part 520093-1 is made of durable stamped brass paired with a nitrile rubber sealing element.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the handle on this plug adjustable?\u003c\/strong\u003e Yes, the snap lock handle on the Sea-Dog 520093-1 is adjustable so it can tighten the plug size to fit most baitwells currently available.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog Baitwell Plug 520093-1 weigh?\u003c\/strong\u003e It weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many plugs come in a package of part 520093-1?\u003c\/strong\u003e The Sea-Dog 520093-1 is sold as a pair (1 pair per package).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog 520093-1 baitwell plug handle?\u003c\/strong\u003e The handle finish on part 520093-1 is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you install the Sea-Dog baitwell plug?\u003c\/strong\u003e Insert the plug into the baitwell drain hole, turn the handle clockwise to tighten it against the fitting, then snap the handle down to lock the cam mechanism and complete the leak-proof seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 520093-1 plug require tools to remove?\u003c\/strong\u003e No, the cam and lever design of the 520093-1 plug allows it to be released by hand without tools, unlike a threaded plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog Baitwell Plug 5\/8 inch?\u003c\/strong\u003e The UPC for part 520093-1 is 035514520140.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other sizes of this Sea-Dog baitwell plug available?\u003c\/strong\u003e The 520093-1 is the 5\/8 inch hole size version of Sea-Dog's baitwell plug line, which is also offered in other hole sizes as separate part numbers.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988826042587,"sku":"S-D-520093-1","price":6.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8152_54af01ab-cd05-457a-a3f8-d59cee091bf6.jpg?v=1784429747"},{"product_id":"sea-dog-520094-1-baitwell-plug-3-4-cam-action-brass-nitrile-livewell-drain-plug","title":"Sea-Dog Baitwell Plug 3\/4 Inch, Brass Cam-Action Drain Plug with Snap Lock Handle","description":"\u003cp\u003eThe Sea-Dog 520094-1 Baitwell Plug is a 3\/4 inch cam-action drain plug built to seal livewells and baitwells against leaks. The plug uses a cam action design: turn the handle clockwise to tighten the plug against the drain opening, then snap the handle down to lock it in place for a leak-proof seal. The snap lock handle is adjustable, allowing the plug to be tightened to fit most baitwells currently available, so a single plug size can accommodate slight variations in drain openings.\u003c\/p\u003e\u003cp\u003eConstruction is durable stamped brass paired with a nitrile rubber seal, a combination chosen for corrosion resistance and a reliable watertight fit in marine environments. The plug measures 5.83 x 3.9 x 1.26 inches overall and weighs 0.112 pounds. It ships as a complete unit with the cam action nitrile rubber plug and the snap lock handle included, ready to install without additional hardware.\u003c\/p\u003e\u003cp\u003eThis 3\/4 inch size is one of a series of Sea-Dog baitwell plugs offered in different diameters, so boat owners should confirm the drain opening size before ordering to get the correct fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520094-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug Diameter:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Diameter:\u003c\/strong\u003e 11\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped brass and nitrile rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.83 x 3.9 x 1.26 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.112 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Cam action nitrile rubber plug, snap lock handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520157\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size drain opening does the Sea-Dog 520094-1 baitwell plug fit?\u003c\/strong\u003e The Sea-Dog 520094-1 is sized for a 3\/4 inch drain opening, with an 11\/16 inch handle diameter, and its adjustable snap lock handle allows it to be tightened to fit most baitwells currently available.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cam action plug seal against leaks?\u003c\/strong\u003e Turning the handle clockwise tightens the plug against the drain opening, and snapping the handle down locks it in place, creating a leak-proof seal for livewells and baitwells.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 520094-1 baitwell plug made of?\u003c\/strong\u003e It is constructed of durable stamped brass with a nitrile rubber seal, a combination selected for corrosion resistance and a watertight fit in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs any additional hardware needed to install this plug?\u003c\/strong\u003e No, the Sea-Dog 520094-1 ships complete with the cam action nitrile rubber plug and the snap lock handle, and installs without additional hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 520094-1?\u003c\/strong\u003e The plug measures 5.83 x 3.9 x 1.26 inches overall and weighs 0.112 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this plug work if my baitwell drain is a different size?\u003c\/strong\u003e The 520094-1 is specifically the 3\/4 inch version; Sea-Dog offers this baitwell plug in other diameters as well, so the drain opening should be measured before ordering to get the correct fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs assembly required for this baitwell plug?\u003c\/strong\u003e No, the Sea-Dog 520094-1 requires no assembly and is ready to install as received.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the handle stay adjustable after installation?\u003c\/strong\u003e Yes, the snap lock handle on the 520094-1 is adjustable, letting it be tightened to accommodate slight variations in baitwell drain openings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sea-Dog 520094-1 baitwell plug?\u003c\/strong\u003e The package includes the cam action nitrile rubber plug and the snap lock handle as a single complete unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 520094-1 suitable for saltwater use?\u003c\/strong\u003e The stamped brass and nitrile rubber construction of the 520094-1 is built for marine environments, including the corrosion exposure typical of saltwater use.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988826075355,"sku":"S-D-520094-1","price":6.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8152_50cb5fcb-c9a5-43e9-be1c-dedd50f07ec1.jpg?v=1784429750"},{"product_id":"sea-dog-520095-1-baitwell-plug-7-8-in-cam-action-brass-livewell-baitwell-drain-plug","title":"Sea-Dog Baitwell Plug 520095-1 - 7\/8 Inch Brass Drain Plug for Livewells and Baitwells","description":"\u003cp\u003eThe Sea-Dog 520095-1 is a 7\/8 inch baitwell plug built to seal livewell and baitwell drains with a cam-action locking design. To install, simply turn the handle clockwise to tighten the plug against the drain opening, then snap the handle down to lock it in place for a leak-proof seal. The snap lock handle is adjustable, allowing the plug to tighten and fit most baitwells currently available, making it a practical replacement or spare for anglers who need a reliable, no-tools installation.\u003c\/p\u003e\u003cp\u003eConstructed of durable stamped brass with a nitrile rubber seal, the 520095-1 resists the corrosion and wear that saltwater and constant water exposure cause, while the rubber component provides the compression needed for a watertight fit. The plug measures 0.75 inches wide by 1 inch high and is finished in black. It is manufactured by Sea-Dog Line, a company with a history stretching back to 1933.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520095-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped Brass and Nitrile Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 0.75 inches wide x 1 inch high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Cam-Action Snap Lock Handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520164\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 520095-1 baitwell plug?\u003c\/strong\u003e The 520095-1 baitwell plug measures 7\/8 inch, sized to fit livewell and baitwell drains of that diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the baitwell plug made of?\u003c\/strong\u003e Stamped brass and nitrile rubber make up the 520095-1 plug, giving it a durable, corrosion-resistant construction for saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 520095-1 plug seal the drain?\u003c\/strong\u003e A cam-action design seals the drain: turn the handle clockwise to tighten the plug, then snap the handle down to lock it in place for a leak-proof fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 520095-1 plug weigh?\u003c\/strong\u003e 0.4 pounds is the shipping weight of the Sea-Dog 520095-1 baitwell plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this plug fit any baitwell?\u003c\/strong\u003e The snap lock handle on the 520095-1 is adjustable, letting the plug tighten to fit most baitwells currently available, though the plug body itself is sized for a 7\/8 inch drain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the plug?\u003c\/strong\u003e The Sea-Dog 520095-1 baitwell plug is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 520095-1?\u003c\/strong\u003e The plug measures 0.75 inches wide by 1 inch high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need tools to install this plug?\u003c\/strong\u003e No tools are required to install the 520095-1: turn the handle clockwise to tighten, then press it down to lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes this baitwell plug?\u003c\/strong\u003e Sea-Dog Line manufactures the 520095-1 baitwell plug; the company's history dates back to 1933.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The UPC for the Sea-Dog 520095-1 baitwell plug is 035514520164.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988826140891,"sku":"S-D-520095-1","price":6.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8152_b1caa338-5f6a-401d-8ee2-a80404bf82db.jpg?v=1784429761"},{"product_id":"sea-dog-565050-1-stainless-steel-rigging-knife-with-marlin-spike-shackle-key-screwdriver-and-bottle-opener","title":"Sea-Dog Stainless Steel Rigging Knife with Marlin Spike, 8-7\/16 Inch Blade, 565050-1","description":"\u003cp\u003eThe Sea-Dog 565050-1 Rigging Knife is a multi-tool marine knife built for sailors, riggers, and anglers who need a compact, corrosion-resistant tool on hand. Constructed of 304 stainless steel, it combines a sharp fixed blade with a Marlin spike, a shackle key, a screw driver, and a bottle opener in one handle, so a single tool covers line work, shackle pins, small fasteners, and everyday deck tasks. The blade measures 8-7\/16 inches and the Marlin spike measures 2-1\/2 inches, giving enough reach to splice line or free a jammed shackle without extra tools. A loop is built into the handle for attaching a lanyard (lanyard not included), letting the knife be tethered to a belt, PFD, or rigging so it is not lost overboard. The 304 stainless steel construction resists corrosion from saltwater spray and marine environments, making this knife suited to long-term use on deck, at the helm, or in a tackle or tool box. Its compact, all-in-one design makes it a practical addition for sailboat rigging, fishing trips, and general marine utility work where a dedicated marlinspike knife is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 565050-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rigging Knife\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length:\u003c\/strong\u003e 8-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarlin Spike Length:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.276 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Tools:\u003c\/strong\u003e Blade, Marlin Spike, Shackle Key, Screw Driver, Bottle Opener, Lanyard Attachment Loop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Shape:\u003c\/strong\u003e Drop Point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Edge:\u003c\/strong\u003e Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Fishing, Marine Utility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCare Instructions:\u003c\/strong\u003e Hand Wash Only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514565028\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat tools are built into the Sea-Dog 565050-1 Rigging Knife?\u003c\/strong\u003e The Sea-Dog 565050-1 combines a sharp blade, a Marlin spike, a shackle key, a screw driver, and a bottle opener in a single handle, plus a loop for attaching a lanyard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the blade length on this rigging knife?\u003c\/strong\u003e The blade on the Sea-Dog 565050-1 measures 8-7\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Marlin spike?\u003c\/strong\u003e The Marlin spike on the Sea-Dog 565050-1 Rigging Knife measures 2-1\/2 inches, enough reach for opening shackles and working splices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 565050-1 Rigging Knife made from?\u003c\/strong\u003e It is constructed of 304 stainless steel, which resists corrosion in saltwater and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the rigging knife come with a lanyard?\u003c\/strong\u003e No, the Sea-Dog 565050-1 has a loop built into the handle for attaching a lanyard, but the lanyard itself is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 565050-1 Rigging Knife weigh?\u003c\/strong\u003e It weighs 0.276 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this knife suitable for fishing as well as sailing?\u003c\/strong\u003e Yes, the Sea-Dog 565050-1 is designed for both fishing and general marine utility use, thanks to its combination blade and rigging tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape and edge does the blade have?\u003c\/strong\u003e The Sea-Dog 565050-1 has a drop point blade with a flat edge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should the rigging knife be cleaned and cared for?\u003c\/strong\u003e The Sea-Dog 565050-1 is hand wash only; despite its corrosion-resistant 304 stainless steel construction, hand washing helps maintain the finish over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the handle also stainless steel?\u003c\/strong\u003e Yes, the handle of the Sea-Dog 565050-1 Rigging Knife is stainless steel, matching the blade for consistent corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the Sea-Dog 565050-1?\u003c\/strong\u003e Ordering the Sea-Dog 565050-1 includes the rigging knife itself with its integrated blade, Marlin spike, shackle key, screw driver, and bottle opener; a lanyard is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the shackle key on this knife handle common marine shackles?\u003c\/strong\u003e The Sea-Dog 565050-1 includes a built-in shackle key intended for freeing and adjusting shackle pins as part of its multi-tool design.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988826665179,"sku":"S-D-565050-1","price":23.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5308.jpg?v=1784429805"},{"product_id":"attwood-12761-7-vertical-mount-rod-holder-set-crisscross-rack-holds-5-to-6-rods","title":"Attwood 12761-7 Vertical Mount Fishing Rod Holder Set, Gray","description":"\u003cp\u003eThe Attwood 12761-7 is a vertical mount rod holder set designed to keep fishing rods organized and protected when not in use. Its crisscross design creates specially designed small slots that secure the fragile tips of each rod while letting you store more rods in a smaller footprint than a straight rack design. Mounted vertically, the holder accommodates 5 to 6 rods stored horizontally, making it a practical option for garages, sheds, boat storage areas, or docks where wall or ceiling space is limited. The unit is finished in gray with a powder coated finish for durability, and it is built as a two-shelf hanging unit for easy access and visibility of stored rods. Recommended for fishing rod storage, the Attwood 12761-7 is intended for outdoor use, standing up to the conditions typical of boat storage and marine environments. Some assembly is required. With compact dimensions of 1.38 inches deep by 3.13 inches wide by 10 inches high, it mounts easily to a wall, wall stud, or other flat vertical surface without taking up significant space. This rod holder set is a straightforward, no-frills storage solution for anglers who need to keep multiple rods secured, tangle-free, and ready for the next trip.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 12761-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Vertical Mount Rod Holder Set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Vertical Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Capacity:\u003c\/strong\u003e 5 to 6 rods stored horizontally\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Crisscross design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 1.38 inches D x 3.13 inches W x 10 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf Type:\u003c\/strong\u003e Hanging Shelf\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Shelves:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Fishing Rod Storage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor\/Outdoor Use:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Powder Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.6667 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697127617\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many fishing rods does the Attwood 12761-7 hold?\u003c\/strong\u003e The Attwood 12761-7 vertical mount rod holder set holds 5 to 6 rods when stored horizontally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this rod holder?\u003c\/strong\u003e The Attwood 12761-7 measures 1.38 inches deep by 3.13 inches wide by 10 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Attwood 12761-7 mounted?\u003c\/strong\u003e It is a vertical mount unit, designed to be mounted vertically to a wall or other flat surface using its hanging shelf design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 12761-7 rod holder?\u003c\/strong\u003e It comes in gray with a powder coated finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this rod holder meant for indoor or outdoor use?\u003c\/strong\u003e The Attwood 12761-7 is recommended for outdoor use, suiting boat storage areas, docks, and garages.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes the crisscross design useful?\u003c\/strong\u003e The crisscross design of the Attwood 12761-7 creates specially designed small slots that secure the fragile tips of each rod while allowing more rods to be stored in a smaller space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 12761-7 require assembly?\u003c\/strong\u003e Yes, this vertical mount rod holder set requires assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 12761-7 weigh?\u003c\/strong\u003e The Attwood 12761-7 rod holder set weighs 1.6667 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many shelves does this rod holder have?\u003c\/strong\u003e The unit has 2 shelves as part of its hanging shelf design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 12761-7 best used for?\u003c\/strong\u003e It is recommended for organized fishing rod storage, keeping multiple rods secured and tangle-free when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 12761-7 protect the rod tips?\u003c\/strong\u003e Yes, the crisscross slot design on the Attwood 12761-7 is specially designed to secure the fragile tips of each rod.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989665558747,"sku":"ATT-12761-7","price":20.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-12761-7_lg__32895.1558112231.500.750.jpg?v=1785188186"},{"product_id":"attwood-12773-2-fold-n-stow-medium-folding-fishing-net-knot-free-nylon-mesh-47-inch-extended","title":"Attwood Fold-N-Stow Medium Folding Fishing Net, Knot-Free Mesh, Model 12773-2","description":"\u003cp\u003eThe Attwood Fold-N-Stow Medium Folding Fishing Net (12773-2) is a collapsible landing net built for anglers who need reliable netting without giving up storage space onboard. A simple folding mechanism lets the net open in a moment when a fish is boatside, then collapse back down to stow in a rod locker, under a seat, or in a small compartment where a rigid net frame would never fit. Fully extended, the net measures 47 inches, with a hoop that spans 16 inches across, making it a practical medium-size choice for a wide range of freshwater and inshore fishing situations.\u003c\/p\u003e\u003cp\u003eThe net bag is made of durable, knot-free netting with a 0.5 inch mesh opening, which is gentler on a fish's scales and slime coat than knotted mesh while still holding up to repeated use. The frame and handle are built from plastic, the shell and inner netting from nylon, and the grip area uses rubber for secure handling even with wet hands. The closure works on a hinge, so the net locks open for landing fish and folds flat for storage in a single motion.\u003c\/p\u003e\u003cp\u003eThis is a general-purpose boat and dock accessory rather than a vehicle- or engine-specific part, so it fits any boat, kayak, or dock setup where a medium folding net is needed; there is no make, model, or engine fitment to match.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 12773-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Folding Fishing Net\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Medium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength (fully extended):\u003c\/strong\u003e 47 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh Opening Size:\u003c\/strong\u003e 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShell Material:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Netting Material:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip Material:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Shape:\u003c\/strong\u003e Drop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Hinge (folding)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFishing Technique:\u003c\/strong\u003e Casting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697127730\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Attwood 12773-2 net when fully extended?\u003c\/strong\u003e Fully extended, the Attwood Fold-N-Stow 12773-2 measures 47 inches, with a hoop width of 16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fish or applications is this net designed for?\u003c\/strong\u003e The 12773-2 is the medium size in the Fold-N-Stow line, sized for a wide variety of general fishing applications rather than one specific species or fish size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the netting on this net knot-free?\u003c\/strong\u003e Yes, the Attwood 12773-2 uses knot-free netting with a 0.5 inch mesh opening, which is gentler on fish than knotted mesh.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Fold-N-Stow net made of?\u003c\/strong\u003e The net bag and inner netting are nylon, the handle and frame are plastic, and the grip area is rubber for secure handling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 12773-2 fishing net weigh?\u003c\/strong\u003e This model weighs 1 pounds, making it easy to stow and carry aboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this net fold down for storage?\u003c\/strong\u003e Yes, the Fold-N-Stow net uses a hinge closure so it folds flat for compact storage and opens quickly with a simple mechanism when needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this net fit any boat or engine setup?\u003c\/strong\u003e The 12773-2 is a general boating and fishing accessory, not tied to any specific boat make, model, or engine, so it works aboard any boat, kayak, or dock where a medium folding net is useful.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 12773-2?\u003c\/strong\u003e The order includes one Attwood Fold-N-Stow folding fishing net, model 12773-2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 12773-2 an Attwood brand product?\u003c\/strong\u003e Yes, the Fold-N-Stow Medium Folding Fishing Net, model 12773-2, is manufactured by Attwood.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mesh opening size on this net?\u003c\/strong\u003e The mesh opening on the Attwood 12773-2 net measures 0.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape is the net head on the 12773-2?\u003c\/strong\u003e The Attwood 12773-2 has a drop-shaped net head, which is common for landing fish over the side of a boat.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989665591515,"sku":"ATT-12773-2","price":14.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81vO7RdYbAL.jpg?v=1784486526"},{"product_id":"attwood-12774-2-large-fold-n-stow-folding-fishing-net-knot-free-triangular-landing-net-extends-to-81","title":"Attwood Large Fold-N-Stow Folding Fishing Net 12774-2, Knot-Free Netting, Extends to 81 Inches","description":"\u003cp\u003eThe Attwood 12774-2 Large Fold-N-Stow Fishing Net is a folding landing net built for anglers who need reach on the water without giving up storage space in the boat. A flip of the handle opens the frame and locks it securely into place, extending the net to a full 81 inches for landing fish at a distance; the same flip folds the net back down into a compact, stowable size when not in use. The net head opens into a triangular shape measuring 27 inches on each side and 27 inches deep, giving a wide capture area for a range of fish sizes. The netting itself is knot-free, which is easier on fish and reduces snagging and tangling compared to knotted mesh. The net bag is nylon, the frame is aluminum for a strong but lightweight structure, and the handle is plastic with a rubber grip for secure handling in wet conditions. The hinge closure is simple to operate with one hand, making it practical for solo anglers working from the deck or gunwale of a boat. Built by Attwood, a member of the American Boat and Yacht Council and the National Marine Manufacturers Association, this net is designed to meet the demands of boat builders and everyday boaters alike, holding up to repeated use on the water.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 12774-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Large Fold-N-Stow Folding Fishing Net\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Triangular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Opening:\u003c\/strong\u003e 27 inches x 27 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Depth:\u003c\/strong\u003e 27 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Length:\u003c\/strong\u003e 81 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Hinge (flip-handle open\/lock)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetting:\u003c\/strong\u003e Knot-free\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShell Material:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame Material:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip Material:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.3359 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697127747\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long does the Attwood 12774-2 net extend?\u003c\/strong\u003e It extends out to 81 inches, giving extra reach for landing fish beside the boat, and folds back down for compact storage when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the net opening on this fishing net?\u003c\/strong\u003e The net head opens into a triangular shape measuring 27 inches on each side and 27 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the netting on the 12774-2 knot-free?\u003c\/strong\u003e Yes, the Attwood 12774-2 uses knot-free netting, which is gentler on fish and less prone to tangling than knotted mesh.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the folding mechanism work?\u003c\/strong\u003e A flip of the handle opens and locks the net into place for use, and the same motion collapses it back down into a compact, stowable size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the net bag made of?\u003c\/strong\u003e The net bag on the Attwood 12774-2 is nylon, paired with an aluminum frame, a plastic handle, and a rubber grip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 12774-2 fishing net weigh?\u003c\/strong\u003e It weighs 2.3359 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this net be used one-handed?\u003c\/strong\u003e Yes, the flip-handle hinge closure is designed to open and lock the net into place with one motion, making it practical for solo use on deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the net come fully assembled?\u003c\/strong\u003e The Attwood 12774-2 Large Fold-N-Stow net ships as a complete, ready-to-use folding net; no additional assembly is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the folded and extended size?\u003c\/strong\u003e The net folds down into a compact size for storage and extends out to 81 inches for use, with a 27 inch by 27 inch by 27 inch triangular net opening when deployed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this net durable enough for regular boating use?\u003c\/strong\u003e Attwood builds the 12774-2 with an aluminum frame and nylon netting, and the brand tests its products for use under regular boating conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should the net be cared for after use?\u003c\/strong\u003e Rinse the Attwood 12774-2 with fresh water after each use, allow it to dry, and store it in a cool, dry place away from direct sunlight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 12774-2 net?\u003c\/strong\u003e The UPC for the Attwood 12774-2 Large Fold-N-Stow Fishing Net is 022697127747.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989665624283,"sku":"ATT-12774-2","price":28.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81L2WCDKA8L.jpg?v=1784486527"},{"product_id":"attwood-12772-2-fold-n-stow-small-folding-fishing-net-knot-free-netting-24-in-extended","title":"Attwood 12772-2 Fold-N-Stow Small Folding Fishing Net, 24 Inches Extended","description":"\u003cp\u003eThe Attwood 12772-2 Fold-N-Stow is a small folding fishing net built to open and close in a single quick motion, then collapse down for compact storage when not in use. Fully extended, the net measures 24 inches, making it well suited for trout fishing and other light-tackle applications where a full-size net would be awkward to store or handle. The mesh basket is made of durable, knot-free netting designed to reduce snagging on hooks and fins while still cradling the catch securely. The frame, handle, and hoop are molded from plastic for a lightweight feel, and the handle is fitted with a rubber grip for secure handling in wet conditions. The Fold-N-Stow design lets the net tuck into a small space on board, in a tackle bag, or in a rod locker, so it is available when needed without taking up storage room the rest of the time. Its fixed-handle, one-size construction gives it a universal fit for anglers who want a compact, easy-to-stow net rather than a bulky fixed-frame model.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 12772-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Small\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e One Size\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Length:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip Material:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetting Material:\u003c\/strong\u003e Knot-free netting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Type:\u003c\/strong\u003e Fixed Handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Drop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFishing Technique:\u003c\/strong\u003e Trout Fishing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Foldable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5681 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697127723\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Attwood 12772-2 net when fully extended?\u003c\/strong\u003e The Attwood 12772-2 Fold-N-Stow net measures 24 inches when fully extended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the net basket made of?\u003c\/strong\u003e The basket on the Attwood 12772-2 is made of durable, knot-free netting, which helps reduce snagging on hooks and fish fins compared to a knotted mesh.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this net a good fit for trout fishing?\u003c\/strong\u003e Yes, the small size of the Attwood 12772-2 is specifically suited to trout fishing, where a compact, easy-to-handle net is preferred over a full-size landing net.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the frame and handle made from?\u003c\/strong\u003e The frame and handle of the Attwood 12772-2 are made of plastic, with a rubber grip on the handle for secure hold in wet conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the net fold up for storage?\u003c\/strong\u003e Yes, the Fold-N-Stow design lets the Attwood 12772-2 fold down into a small space, so it can be stowed in a tackle bag, rod locker, or boat compartment when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the handle fixed or telescoping?\u003c\/strong\u003e The Attwood 12772-2 has a fixed handle rather than a telescoping or extendable one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size or fit type is this net?\u003c\/strong\u003e The Attwood 12772-2 is listed as One Size with a universal fit type, and is categorized as the small version of Attwood's Fold-N-Stow net line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the net weigh?\u003c\/strong\u003e The Attwood 12772-2 Fold-N-Stow net weighs 0.5681 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this net?\u003c\/strong\u003e Ordering the Attwood 12772-2 includes one Fold-N-Stow folding fishing net; no additional accessories are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow quickly does the net open and close?\u003c\/strong\u003e A simple mechanism on the Attwood 12772-2 allows the net to open and close in one quick motion, so it is ready to use as soon as it is needed.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989665657051,"sku":"ATT-12772-2","price":9.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/715vsWLgr8L.jpg?v=1784486528"},{"product_id":"attwood-5009-4-heavy-duty-adjustable-rod-holder-with-combo-mount-black","title":"Attwood 5009-4 Heavy-Duty Adjustable Rod Holder with Combo Mount, Black","description":"\u003cp\u003eThe Attwood 5009-4 is a heavy-duty adjustable rod holder built in a durable metal construction with a black finish, designed for anglers who want precise control over rod tip positioning on the water. Unlike fixed-angle holders, the 5009-4 offers a full 180-degree vertical adjustment range, letting you dial in the exact rod height for trolling, bottom fishing, or storage. A large, easy-grip lock-nut lets you set and lock that angle without tools, and a rapid-release latch mechanism makes it fast to find and release the rod holder from its mount when you need to grab a rod quickly.\u003c\/p\u003e\u003cp\u003eThe holder is compatible with both bait casting and spinning reels, and it is designed for use with Attwood Heavy-Duty Combo Mounts, Heavy-Duty Rail Mounts, or Flush Mounts, giving you flexibility in how it is installed on your boat. It fits rods up to 2.5 inches in diameter, making it suitable for a wide range of standard fishing rods. The 5009-4 ships with combo mount hardware and a black finish; the same rod holder is also available in a white finish and in a dedicated flush-mount version under different part numbers for boats that need a different color match or mounting style.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5009-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Combo Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Rod Diameter:\u003c\/strong\u003e Up to 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Adjustment Range:\u003c\/strong\u003e 180 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Reel Types:\u003c\/strong\u003e Bait casting and spinning reels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697500946\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 5009-4 rod holder made of?\u003c\/strong\u003e The Attwood 5009-4 is made of metal with a black finish, built for heavy-duty use on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 5009-4 rod holder weigh?\u003c\/strong\u003e It weighs 1.45 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size rods fit in the 5009-4 rod holder?\u003c\/strong\u003e Rods up to 2.5 inches in diameter fit the Attwood 5009-4 rod holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 5009-4 be adjusted to different angles?\u003c\/strong\u003e Yes, the Attwood 5009-4 offers a 180-degree vertical adjustment range, and a large, easy-grip lock-nut lets you lock in the angle you want.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5009-4 work with spinning reels or only bait casting reels?\u003c\/strong\u003e Both. The Attwood 5009-4 is compatible with bait casting and spinning reels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounts is the Attwood 5009-4 designed to work with?\u003c\/strong\u003e It is designed for use with Attwood Heavy-Duty Combo Mounts, Heavy-Duty Rail Mounts, or Flush Mounts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5009-4 come with a combo mount included?\u003c\/strong\u003e Yes, the 5009-4 is the combo-mount version of this rod holder, in a black finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a quick-release feature on this rod holder?\u003c\/strong\u003e Yes, the Attwood 5009-4 has a rapid-release latch mechanism that makes it fast to find and release the rod holder from its mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 5009-4 available in other colors?\u003c\/strong\u003e This rod holder is also offered in a white finish under a different part number, and in a flush-mount version in black, for boats that need a different look or mounting style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many rod holders come in a package?\u003c\/strong\u003e The Attwood 5009-4 is sold as a single unit, pack of 1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 5009-4?\u003c\/strong\u003e The UPC for the Attwood 5009-4 rod holder is 022697500946.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989669720283,"sku":"ATT-5009-4","price":25.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-5009-4_lg_2__90225.1558139374.500.750.jpg?v=1785188834"},{"product_id":"attwood-5011-7-heavy-duty-fishing-rod-holder-combo-mount-top-or-side-gunwale-mount-positive-lock-black","title":"Attwood 5011-7 Rod Holder Combo Mount, Side or Top of Gunwale Mounting, Positive Lock, Black","description":"\u003cp\u003eThe Attwood 5011-7 is a combo mount for fishing rod holders, built to give anglers flexible installation options right on the boat's gunwale. Unlike a fixed mount, this combo mount can be installed on the side of the gunwale or on top of it, so it adapts to the layout of your boat rather than forcing one mounting position. The mount uses a positive lock design that improves the fit and holds the rod holder securely in place once installed, reducing play and rattle while fishing.\u003c\/p\u003e\u003cp\u003eConstructed of metal in a black finish, the 5011-7 is engineered to work with Attwood's own rod holder mounting patterns as well as other leading rod holder mounting patterns, making it a practical upgrade or replacement mount for anglers who already run a compatible rod holder. It is part of Attwood's Pro-Series Combo Rod Holder Mounts lineup (Part Numbers 5011, 5012 and 5016), which carries a 3 year warranty. The unit ships as a single mount ready for installation with standard mounting hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5011-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Pro-Series Combo Rod Holder Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Location:\u003c\/strong\u003e Side of gunwale or top of gunwale\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Mechanism:\u003c\/strong\u003e Positive lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Compatible with Attwood and other leading rod holder mounting patterns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.325 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697501141\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan the Attwood 5011-7 be mounted on top of the gunwale instead of the side?\u003c\/strong\u003e Yes, the Attwood 5011-7 combo mount can be installed on top of the gunwale or on the side of the gunwale, giving you flexibility to match your boat's layout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the positive lock feature on the 5011-7 rod holder mount?\u003c\/strong\u003e The positive lock design on the Attwood 5011-7 improves the fit between the mount and the rod holder, holding it securely in place once installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 5011-7 rod holder mount made from?\u003c\/strong\u003e The 5011-7 is made of metal and finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 5011-7 rod holder mount weigh?\u003c\/strong\u003e The Attwood 5011-7 weighs 0.325 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 5011-7 mount work with rod holders from other brands?\u003c\/strong\u003e It is compatible with Attwood rod holder mounting patterns as well as other leading rod holder mounting patterns, not just Attwood-branded rod holders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the rod holder itself included with the 5011-7 mount?\u003c\/strong\u003e The Attwood 5011-7 is the combo mount only; it is designed to accept a compatible rod holder rather than including a separate rod holder unit bundled in the listing description.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between part numbers 5011, 5012, and 5016 in the Pro-Series Combo Rod Holder Mount line?\u003c\/strong\u003e 5011, 5012, and 5016 are the part numbers covered under Attwood's Pro-Series Combo Rod Holder Mounts warranty category, which includes the 5011-7 and carries a 3 year warranty; specific dimensional differences between them are not detailed in this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 5011-7 rod holder mount come in?\u003c\/strong\u003e The Attwood 5011-7 is available in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies to the Attwood 5011-7 combo mount?\u003c\/strong\u003e As part of Attwood's Pro-Series Combo Rod Holder Mounts (Part Numbers 5011, 5012 and 5016), the 5011-7 carries a 3 year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounts come in one 5011-7 package?\u003c\/strong\u003e One Attwood 5011-7 mount is included per unit.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989669818587,"sku":"ATT-5011-7","price":7.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-5011-7_lg__67514.1558113426.500.750.jpg?v=1785188355"},{"product_id":"attwood-5009w4-2-in-1-non-adjustable-rod-holder-white-with-flush-mount","title":"Attwood 5009W4 2-In-1 Non-Adjustable Rod Holder, White, Side Mount","description":"\u003cp\u003eThe Attwood 5009W4 is a side-mount rod holder built with a fixed vertical angle to keep your rod positioned exactly where you set it, with no adjustment mechanism to loosen or drift out of place over time. It is sized for medium and light action gear: the rod throat opening fits most standard and ultra-light rods up to 1-3\/16 inches in diameter, and the built-in locking ring accommodates spinning reel handle shanks up to 7\/16 inch in diameter, holding the reel securely in place while trolling or at rest. Finished in white, it mounts to the side of a gunwale, console, or rail for a clean, low-profile installation. The 5009W4 is sold as a single unit and is also available packaged as part of a promotional double-pack for anglers rigging multiple rod stations at once. Its simple, fixed-angle construction makes it a straightforward, durable choice for boaters who want a dependable holding point for a spare or trolling rod without the complexity or failure points of an adjustable mount.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5009W4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Side Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Fixed vertical angle (non-adjustable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Throat Opening:\u003c\/strong\u003e Up to 1-3\/16 inches diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReel Handle Shank Compatibility:\u003c\/strong\u003e Up to 7\/16-inch diameter (locking ring)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.165 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697500953\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00022697500953\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Single package or promotional double-pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal side-mount installation; fits most standard and ultra-light rods up to 1-3\/16 inches in diameter with spinning reel handle shanks up to 7\/16 inch in diameter.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 5009W4 rod holder adjustable?\u003c\/strong\u003e No, the 5009W4 has a fixed vertical angle designed to optimize rod positioning rather than an adjustable mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rod sizes fit this rod holder?\u003c\/strong\u003e The rod throat opening on the Attwood 5009W4 fits most standard and ultra-light rods up to 1-3\/16 inches in diameter, making it suited to medium and light action gear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this rod holder work with my spinning reel?\u003c\/strong\u003e Yes, the built-in locking ring on the 5009W4 fits spinning reel handle shanks up to 7\/16 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Attwood 5009W4?\u003c\/strong\u003e This rod holder is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Attwood 5009W4 mounted?\u003c\/strong\u003e It is a side-mount rod holder, installed on the side of a gunwale, console, or rail rather than flush-mounted into a horizontal surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 5009W4 rod holder weigh?\u003c\/strong\u003e The Attwood 5009W4 weighs 1.165 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 5009W4 made of?\u003c\/strong\u003e The rod holder is constructed of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a flush-mount or black version of this rod holder?\u003c\/strong\u003e Attwood offers a flush-mount version in black as a separate part, SKU 5014-4; the 5009W4 is the white side-mount version and is a distinct part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this rod holder be purchased in a multi-pack?\u003c\/strong\u003e Yes, the 5009W4 is available as a single package or in a promotional double-pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 5009W4?\u003c\/strong\u003e The UPC for the Attwood 5009W4 rod holder is 022697500953.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5009W4 come with mounting hardware?\u003c\/strong\u003e The listing covers the rod holder itself; specific included mounting hardware is not detailed in the available product information.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of boats or applications is this rod holder suited for?\u003c\/strong\u003e The fixed-angle, side-mount design of the 5009W4 suits general trolling and storage applications for medium and light action rods on most boats.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989669851355,"sku":"ATT-5009W4","price":29.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-5009w4_lg__98345.1558138966.500.750.jpg?v=1785189192"},{"product_id":"attwood-5012-7-pro-series-rail-mount-rod-holder-adapter-black-fits-3-4-in-to-1-1-4-in-rails","title":"Attwood 5012-7 Rod Holder Rail Mount, Black","description":"\u003cp\u003eThe Attwood 5012-7 is a rail-mount accessory that expands where and how you can position rod holders aboard your boat, giving anglers more flexibility to secure fishing rods exactly where they're needed. It is designed for use with a compatible Heavy-Duty Combo Mount (sold separately), which pairs with this rail mount to complete the installation. The mount comes with everything required to clamp onto rails ranging from 3\/4 inch up to 1-1\/4 inch wide, making it adaptable to a range of common boat rail sizes.\u003c\/p\u003e\u003cp\u003eOnce installed, the Attwood 5012-7 provides a full 360 degrees of horizontal adjustment, letting you rotate and angle the attached rod holder to the position that works best for trolling, casting, or storage. It is versatile enough to be used as either a side mount or a pedestal mount, depending on your boat's layout and rigging preferences. The mount is molded from durable plastic in a black finish that blends with common marine hardware and rail fittings, and it is built to hold up to regular use in a marine environment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5012-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Rail mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Rail Width:\u003c\/strong\u003e 3\/4 inch to 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal Adjustment:\u003c\/strong\u003e 360 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Side mount or pedestal mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697501240\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 5012-7 used for?\u003c\/strong\u003e The Attwood 5012-7 is a rail mount that expands rod holder mounting flexibility, letting you attach a rod holder to a boat rail rather than a flat surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 5012-7 include a rod holder?\u003c\/strong\u003e No, the 5012-7 is the rail mount base only; it is designed for use with a Heavy-Duty Combo Mount, which is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size rails does this mount fit?\u003c\/strong\u003e It comes with everything required to mount to rails from 3\/4 inch to 1-1\/4 inch wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the mount be adjusted after installation?\u003c\/strong\u003e Yes, the Attwood 5012-7 provides a full 360 degrees of horizontal adjustment once clamped to the rail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this be used as a pedestal mount instead of a side mount?\u003c\/strong\u003e Yes, the 5012-7 can be used either as a side mount or as a pedestal mount depending on how you rig it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 5012-7 made from?\u003c\/strong\u003e It is made from durable black plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the Attwood 5012-7 come in?\u003c\/strong\u003e The 5012-7 rail mount is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 5012-7 weigh?\u003c\/strong\u003e The Attwood 5012-7 rail mount weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with the 5012-7?\u003c\/strong\u003e Yes, everything required to mount the 5012-7 to rails from 3\/4 inch to 1-1\/4 inch wide is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 5012-7 genuine Attwood hardware?\u003c\/strong\u003e Yes, the 5012-7 is a genuine Attwood part, sold under Attwood's own part number 5012-7.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989669884123,"sku":"ATT-5012-7","price":12.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-5012-7_lg__38693.1558113491.500.750.jpg?v=1785188239"},{"product_id":"attwood-5022-7-black-flush-mount-base-for-rod-holders","title":"Attwood 5022-7 Black Flush Mount Base for Rod Holders","description":"\u003cp\u003eThe Attwood 5022-7 is a black flush mount base designed for installing a rod holder into a boat's gunwale, deck, or transom. Its machined exterior finish gives it a clean, factory-quality look that sits flush with the mounting surface rather than protruding like a clamp-on adaptor. The compact base measures 4.41 x 2.91 x 2.48 inches and weighs just 0.1963 pounds, making it a lightweight, low-profile addition to any rod holder setup. This is a genuine Attwood part cataloged under the Rod Holder Accessories category, built for anglers who want a permanent, streamlined mounting point for their rod holders. Because it is a flush mount rather than a surface clamp, it is best suited to boats where a base can be recessed into the mounting surface for a smooth finish. For buyers who prefer a different color to match their boat's hardware, Attwood also offers this same base in white under part number 5023-7, a separate SKU. The 5022-7's black finish and compact dimensions make it easy to pair with standard rod holder inserts sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5022-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 4.41 x 2.91 x 2.48 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1963 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697502261\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Rod Holder Accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Flush Mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 5022-7?\u003c\/strong\u003e The Attwood 5022-7 is a black flush mount base used to install a rod holder into a boat's gunwale, deck, or transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 5022-7 base?\u003c\/strong\u003e It is black. Attwood also makes the same base in white under part number 5023-7, which is a separate SKU.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 5022-7 flush mount base?\u003c\/strong\u003e The Attwood 5022-7 measures 4.41 x 2.91 x 2.48 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 5022-7 weigh?\u003c\/strong\u003e The Attwood 5022-7 flush mount base weighs 0.1963 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 5022-7 have?\u003c\/strong\u003e It has a machined exterior finish, giving the black base a clean, factory-quality appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 5022-7 a flush mount or a clamp-on mount?\u003c\/strong\u003e The 5022-7 is a flush mount base, meaning it sits recessed into the mounting surface rather than clamping onto it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Attwood 5022-7 made?\u003c\/strong\u003e The Attwood 5022-7 flush mount base is made in the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 5022-7 a genuine Attwood part?\u003c\/strong\u003e Yes, the 5022-7 is a genuine Attwood part, cataloged under Attwood's Rod Holder Accessories line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does the 5022-7 fall under?\u003c\/strong\u003e The 5022-7 is listed as a Rod Holder Accessory, specifically a flush mount base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a white version of this flush mount base?\u003c\/strong\u003e Yes, the white version is Attwood part number 5023-7, a different SKU from the black 5022-7.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 5022-7?\u003c\/strong\u003e The UPC for the Attwood 5022-7 black flush mount base is 022697502261.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989669982427,"sku":"ATT-5022-7","price":8.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-5022-7_lg__76365.1558139480.500.750.jpg?v=1785188486"},{"product_id":"attwood-5016-3-heavy-duty-rod-holder-extension-black-up-to-6-in-fits-round-or-square-7-8-to-1-1-4-in-rail","title":"Attwood 5016-3 Rod Holder Extension, Black, Up to 6 Inches, Fits 7\/8 to 1-1\/4 Inch Round or Square Rail","description":"\u003cp\u003eThe Attwood 5016-3 Rod Holder Extension is a heavy-duty extension designed to raise or reposition a rod holder mount by up to 6 inches, giving anglers better clearance and a more useful casting angle. It is built from metal or high-strength plastic in a black finish and is designed for use with all Attwood mounts, including the Combo Mount and Attwood Standard Side Mounts, as well as other leading rod holder mounts. The extension mounts to round or square rail from 7\/8 inch up to 1 1\/4 inch in diameter, and it ships complete with all necessary mounting hardware so no separate hardware purchase is required.\u003c\/p\u003e\u003cp\u003eThis extension is part of Attwood's Pro-Series Combo Rod Holder Mount lineup and is intended as an accessory to extend the reach of a compatible rod holder mount rather than as a standalone rod holder. It is a practical upgrade for boaters who need extra height or offset from their existing rail-mounted or combo-mounted rod holder setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5016-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal or High-Strength Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Rail Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Diameter Compatibility:\u003c\/strong\u003e 7\/8 inch to 1 1\/4 inch, round or square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension Length:\u003c\/strong\u003e Up to 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e All necessary mounting hardware included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.475 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697601643\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for use with all Attwood mounts, including the Attwood Combo Mount and Attwood Standard Side Mounts, and compatible with other leading rod holder mounts that accept a 7\/8 inch to 1 1\/4 inch diameter round or square rail.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 5016-3 Rod Holder Extension used for?\u003c\/strong\u003e It extends a compatible rod holder mount by up to 6 inches, giving the rod holder more height or offset from the rail it is mounted to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rail sizes does the 5016-3 extension fit?\u003c\/strong\u003e The Attwood 5016-3 mounts to round or square rail with a diameter from 7\/8 inch up to 1 1\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with the 5016-3?\u003c\/strong\u003e Yes, the Attwood 5016-3 Rod Holder Extension comes complete with all necessary hardware for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this rod holder extension?\u003c\/strong\u003e The Attwood 5016-3 is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 5016-3 extension made of?\u003c\/strong\u003e It is constructed of metal or high-strength plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 5016-3 work with mounts other than Attwood's?\u003c\/strong\u003e The Attwood 5016-3 is intended for use with all Attwood mounts, including the Combo Mount and Attwood Standard Side Mounts, and it can also be used with other leading rod holder mounts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 5016-3 weigh?\u003c\/strong\u003e The Attwood 5016-3 Rod Holder Extension weighs 0.475 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much extra height does the 5016-3 add to a rod holder?\u003c\/strong\u003e Up to 6 inches, depending on how the extension is installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 5016-3 a rod holder on its own?\u003c\/strong\u003e No, the 5016-3 is an extension accessory designed to raise or reposition an existing compatible rod holder mount, not a standalone rod holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty does the Attwood 5016-3 carry?\u003c\/strong\u003e The Attwood 5016-3, part of Attwood's Pro-Series Combo Rod Holder Mount line, is covered by a 3-year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 5016-3?\u003c\/strong\u003e The UPC for the Attwood 5016-3 Rod Holder Extension is 022697601643.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989670047963,"sku":"ATT-5016-3","price":7.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-5016-3_lg__54750.1558139426.500.750.jpg?v=1785188052"},{"product_id":"attwood-5010-4-pro-series-rod-holder-with-combo-mount-black-deep-tooth-gear-lock-for-bait-casting-and-spinning-reels","title":"Attwood Pro Series Rod Holder 5010-4, Black Deck Mount with Combo Mount","description":"\u003cp\u003eThe Attwood Pro Series Rod Holder (5010-4) is a black, deck-mounted fishing rod holder built for anglers who use bait casting or spinning reels. It features a reinforced deep-tooth gear lock that securely holds the rod holder in its mounting base, so it stays put through hook-sets and fighting fish. A Quick Release Lever gives 160 degrees of vertical adjustment, and the ergonomic design lets you drop a rod in and pull it back out quickly when a bite hits.\u003c\/p\u003e\u003cp\u003eThe 5010-4 comes with an included Combo Mount, which supports multiple mounting configurations, including on the side of the boat or on top of the gunwale, so you can position it where it works best on your deck or rail. It is built from Engineered Resin for high strength while keeping weight low, and it is backed by a 5-year warranty as part of Attwood's Pro-Series Rod Holder line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5010-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Deck Mount Rod Holder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Engineered Resin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Deck Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Adjustment:\u003c\/strong\u003e 160 degrees (Quick Release Lever)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReel Compatibility:\u003c\/strong\u003e Bait casting and spinning reels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Combo Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697501042\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the warranty on the Attwood 5010-4 Pro Series Rod Holder?\u003c\/strong\u003e The Attwood 5010-4 Pro Series Rod Holder carries a 5-year warranty as part of Attwood's Pro-Series Rod Holder line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5010-4 rod holder work with spinning reels?\u003c\/strong\u003e Yes, the 5010-4 is designed for use with both bait casting and spinning reels, using a reinforced deep-tooth gear lock to hold the rod securely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Attwood 5010-4 rod holder?\u003c\/strong\u003e The 5010-4 is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 5010-4 rod holder weigh?\u003c\/strong\u003e The Attwood 5010-4 Pro Series Rod Holder weighs 1.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting options come with the 5010-4?\u003c\/strong\u003e The 5010-4 includes a Combo Mount that supports multiple mounting configurations, such as on the side of the boat or on top of the gunwale.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 5010-4 rod holder made from?\u003c\/strong\u003e It is made from Engineered Resin, chosen for high strength while keeping the rod holder lightweight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much can the rod holder be adjusted once mounted?\u003c\/strong\u003e A Quick Release Lever on the 5010-4 allows 160 degrees of vertical adjustment, with an ergonomic design for quick rod removal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Attwood 5010-4?\u003c\/strong\u003e The 5010-4 ships with the rod holder and its Combo Mount for mounting on the side or top of the gunwale.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 5010-4 rod holder?\u003c\/strong\u003e The Attwood 5010-4 Pro Series Rod Holder has UPC 022697501042.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the gear lock keep the rod holder secure while fighting a fish?\u003c\/strong\u003e Yes, the 5010-4 uses a reinforced deep-tooth gear lock that securely holds the rod holder in its mounting base during use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 5010-4 genuine Attwood, not an aftermarket copy?\u003c\/strong\u003e Yes, the 5010-4 is a genuine Attwood Pro Series Rod Holder, identified by Attwood part number 5010-4.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989670211803,"sku":"ATT-5010-4","price":37.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-5010-4_large__69666.1558177830.500.750.jpg?v=1785189167"},{"product_id":"attwood-5074-3-sure-grip-clamp-on-rod-holder-mounting-base-fits-round-rails-up-to-7-8-inch-extruded-aluminum","title":"Attwood 5074-3 Sure-Grip Rod Holder Mounting Base, Clamp-On, Fits Round Rails up to 7\/8 Inch","description":"\u003cp\u003eThe Attwood 5074-3 Sure-Grip Rod Holder Mounting Base is a clamp-on rail base built to pair with Attwood Sure-Grip rod holders, giving boaters a way to add a rod holder to round rail without drilling into the boat. The base clamps directly onto round rails up to 7\/8 inch in diameter, making it a straightforward add-on for boats already fitted with standard rail tubing. It is constructed of extruded aluminum with a silver finish, giving it corrosion resistance for use in a marine environment. The base ships as a single unit and is sized for one rod holder mount, so anglers adding multiple rod holders along a rail will need one base per holder location. Because it clamps on rather than requiring through-bolting or drilled mounting holes, installation is quick and the base can be repositioned along the rail as needed. This mounting base is intended for use with the Attwood Sure-Grip line of rod holders, letting boat owners position rod storage exactly where it is convenient on their rail-equipped boat, kayak, or fishing platform.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5074-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Sure Grip Clamp-On Rod Holder Mounting Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Clamp-on rail base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Fitment:\u003c\/strong\u003e Round rails up to 7\/8 inch diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Extruded aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 2 x 4 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions (L x W x H):\u003c\/strong\u003e 5.71 x 2.56 x 1.77 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2513 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697507433\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 5074-3 used for?\u003c\/strong\u003e It is a clamp-on mounting base that lets you attach an Attwood Sure-Grip rod holder to a round rail, giving you a rod holder position without drilling into the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size rail does the 5074-3 mounting base fit?\u003c\/strong\u003e The base clamps onto round rails up to 7\/8 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 5074-3 require drilling to install?\u003c\/strong\u003e No, it is a clamp-on rail base, so it attaches to the rail without drilling mounting holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sure-Grip mounting base made from?\u003c\/strong\u003e The 5074-3 base is constructed of extruded aluminum with a silver finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 5074-3 weigh?\u003c\/strong\u003e The mounting base weighs 0.2513 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5074-3 come with a rod holder included?\u003c\/strong\u003e No, the 5074-3 is the clamp-on mounting base only; it is designed for use with Attwood Sure-Grip rod holders, which are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounting bases come in one package?\u003c\/strong\u003e One Attwood 5074-3 base is included per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Attwood 5074-3?\u003c\/strong\u003e The item measures 2 x 4 x 6 inches, with a package size of 5.71 x 2.56 x 1.77 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Attwood 5074-3 be repositioned on the rail after installation?\u003c\/strong\u003e Because it is a clamp-on base rather than a bolted or drilled mount, the 5074-3 can be loosened and repositioned along a compatible round rail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 5074-3 base rated for saltwater use?\u003c\/strong\u003e The base is made of extruded aluminum, a material chosen for its corrosion resistance in marine environments.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989670342875,"sku":"ATT-5074-3","price":8.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-5074-3_lg__02709.1558113869.500.750.jpg?v=1785188642"},{"product_id":"attwood-5062-3-sure-grip-25-degree-steel-rod-holder-with-5071-mounting-base-and-4-inch-stainless-stem-black","title":"Attwood 5062-3 25-Degree Sure Grip Steel Rod Holder with 5071 Mounting Base and 4-Inch Stainless Steel Stem","description":"\u003cp\u003eThe Attwood 5062-3 is a 25-degree Sure Grip steel rod holder built for drift fishing, pan fishing, crappie fishing, and similar techniques where keeping the rod tip at a higher angle matters. The 25-degree mounting angle is suited to drifting or trolling, holding the rod at a lift that keeps the line clear and the tip visible. The rod tube itself is coated steel, 3\/8 inch in size, offering a tough, strong, corrosion-resistant holder that stands up to repeated use in a marine environment. A UV-resistant plastic coating covers the rod butt and handle area to protect against sun exposure and wear, while the exposed stem and wing nut are stainless steel for long-term, corrosion-free service in wet conditions.\u003c\/p\u003e\u003cp\u003eThis rod holder includes the Attwood 5071 mounting base and a 4-inch stainless steel stem, so it is ready to deck-mount without sourcing a separate base. The finish is black. It ships as a single unit (1 rod holder).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5062-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Angle:\u003c\/strong\u003e 25 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Deck mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Mounting Base:\u003c\/strong\u003e 5071\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Length:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem and Wing Nut Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Tube Material:\u003c\/strong\u003e Coated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Rod Size:\u003c\/strong\u003e 0.38 inches (3\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.7463 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697506238\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat angle does the Attwood 5062-3 rod holder hold the rod at?\u003c\/strong\u003e The Attwood 5062-3 holds the rod at a 25-degree angle, which keeps the rod tip higher for drift fishing and trolling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5062-3 come with a mounting base?\u003c\/strong\u003e Yes, the 5062-3 includes the Attwood 5071 mounting base along with a 4-inch stainless steel stem, so no separate base needs to be purchased.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rod diameter does this holder fit?\u003c\/strong\u003e The 5062-3 rod tube fits rods up to 0.38 inches (3\/8 inch) in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rod tube made of?\u003c\/strong\u003e The tube on the 5062-3 is coated steel, chosen for its strength and corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the stem and wing nut on the 5062-3 rust-resistant?\u003c\/strong\u003e Yes, the exposed stem and wing nut are stainless steel, giving years of corrosion-free use even in saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the finish of the Attwood 5062-3?\u003c\/strong\u003e It has a black finish, with a UV-resistant plastic coating over the rod butt and handle area for added protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 5062-3 rod holder weigh?\u003c\/strong\u003e The Attwood 5062-3 weighs 0.7463 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a deck mount or rail mount rod holder?\u003c\/strong\u003e The 5062-3 is a deck mount rod holder, installed using its included 5071 base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fishing styles is the 5062-3 designed for?\u003c\/strong\u003e It is designed for drift fishing, pan fishing, and crappie fishing, and its 25-degree angle also suits trolling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many rod holders come in one package?\u003c\/strong\u003e The Attwood 5062-3 is sold as a single rod holder unit, including its mounting base and stem.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the stem on the 5062-3?\u003c\/strong\u003e The stainless steel stem included with the 5062-3 measures 4 inches.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989670375643,"sku":"ATT-5062-3","price":14.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51ThpH60iVL.jpg?v=1784486847"},{"product_id":"attwood-rh-4646-2-in-1-side-mount-rod-holder-sold-as-pair-fixed-vertical-angle-black-fits-standard-and-ultra-light-rods","title":"Attwood RH-4646 2-in-1 Rod Holders, Side Mount, Fixed Vertical Angle, Black, Sold as Pair","description":"\u003cp\u003eThe Attwood RH-4646 is a set of two 2-in-1 non-adjustable rod holders, sold as a pair, designed for anglers who want a simple, secure place to stow or fish a rod on deck. Each holder mounts with a side mount bracket and holds the rod at a fixed vertical angle to optimize rod positioning while trolling, drifting, or just keeping a rod out of the way while running.\u003c\/p\u003e\u003cp\u003eThe rod throat opening fits most standard and ultra-light rods up to 1-3\/16 inches in diameter, so the holder works with a wide range of light and medium action gear rather than being limited to a single rod style. A locking ring accommodates spinning reel handle shanks up to 7\/16 inch, keeping the reel seated securely once the rod is dropped in. Both holders in the pair are finished in black to blend with most boat trim and hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RH-4646\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Side Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold as a pair (2 rod holders)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Angle:\u003c\/strong\u003e Fixed vertical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Throat Opening:\u003c\/strong\u003e Fits rods up to 1-3\/16 inches in diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReel Handle Shank Locking Ring:\u003c\/strong\u003e Fits spinning reel handle shanks up to 7\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 11 inches D x 7 inches W x 3 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 089065046468\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat rod sizes fit the Attwood RH-4646 rod holder?\u003c\/strong\u003e The RH-4646 rod throat opening fits most standard and ultra-light rods up to 1-3\/16 inches in diameter, covering a wide range of light and medium action gear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many rod holders come in the package?\u003c\/strong\u003e The RH-4646 is sold as a pair, so two matching black rod holders are included in one package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the RH-4646 hold the rod at an adjustable angle?\u003c\/strong\u003e No, the Attwood RH-4646 has a fixed vertical angle, not an adjustable one, which keeps the rod positioned consistently once mounted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the RH-4646 mount to a boat?\u003c\/strong\u003e The RH-4646 uses a side mount bracket rather than a flush or gimbal mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a spinning reel fit in this rod holder?\u003c\/strong\u003e Yes, the RH-4646 has a locking ring that fits spinning reel handle shanks up to 7\/16 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Attwood RH-4646?\u003c\/strong\u003e The RH-4646 rod holder pair is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RH-4646 suitable for heavy action rods?\u003c\/strong\u003e The RH-4646 is sized for medium and light action gear, with a rod throat opening up to 1-3\/16 inches, so it is not intended for heavy action rods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the Attwood RH-4646 rod holder set?\u003c\/strong\u003e The RH-4646 pair weighs 1.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the RH-4646 be bought as a single unit instead of a pair?\u003c\/strong\u003e The RH-4646 is packaged and sold as a pair of two rod holders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Attwood RH-4646?\u003c\/strong\u003e The RH-4646 measures 11 inches D x 7 inches W x 3 inches H.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989678108891,"sku":"ATT-RH-4646","price":27.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/RH-4646__54788.1737893914.500.750.jpg?v=1785188956"},{"product_id":"moeller-marine-042280-livewell-bait-tank-23-gallon-light-blue","title":"Moeller Marine 23 Gallon Livewell, Light Blue (Part Number 042280)","description":"\u003cp\u003eThe Moeller Marine 042280 is a 23 gallon livewell finished in light blue, built for anglers who need a dedicated onboard tank for holding bait or a catch. It is part of Moeller's Livewells \u0026amp; Bait Tanks lineup and is identified by manufacturer part number 042280. This is the light blue version of the tank; Moeller also offers the same livewell in white under part number 042280-W, so be sure to order the color that matches your boat setup.\u003c\/p\u003e\u003cp\u003eAt 13 pounds, the empty tank is light enough to mount or reposition without special equipment, while still offering a full 23 gallon capacity for keeping bait alive and active during a day on the water. It is cataloged under UPC 739729013724 for easy reordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 042280\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 23 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Light Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729013724\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Livewells \u0026amp; Bait Tanks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the capacity of the Moeller Marine 042280 livewell?\u003c\/strong\u003e The Moeller Marine 042280 livewell holds 23 gallons of water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 042280?\u003c\/strong\u003e Part number 042280 is the light blue version of Moeller Marine's 23 gallon livewell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a white version of this livewell?\u003c\/strong\u003e Yes, Moeller Marine offers the same 23 gallon livewell in white under a separate part number, 042280-W, so order 042280 specifically for the light blue color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 042280 livewell weigh?\u003c\/strong\u003e The empty Moeller Marine 042280 livewell weighs 13 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Moeller Marine 23 gallon livewell?\u003c\/strong\u003e The UPC for the light blue 042280 livewell is 739729013724.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does the 042280 belong to?\u003c\/strong\u003e 042280 is listed under Livewells \u0026amp; Bait Tanks, Moeller Marine's category for onboard bait and catch tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Moeller Marine 042280 used for?\u003c\/strong\u003e It is a livewell tank designed to be installed on a boat to hold bait or a catch in water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Moeller Marine 042280 livewell made?\u003c\/strong\u003e The 042280 livewell is made in the USA or imported, depending on production run.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991092244699,"sku":"MOE-042280","price":381.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/519zRDhjHkL.jpg?v=1784491388"},{"product_id":"moeller-marine-042280-w-23-gallon-round-livewell-bait-tank-white-20-w-x-18-h","title":"Moeller Marine 23 Gallon Round Livewell, White, 042280-W, 20 in. Width x 18 in. Height","description":"\u003cp\u003eThe Moeller Marine 042280-W is a 23 gallon round livewell built for anglers who need a reliable, ready-to-mount bait tank. Finished in white, this round livewell measures 20 inches in width and 18 inches in height, sized to fit into boat consoles, transoms, or custom livewell wells where a compact round profile is preferred over a rectangular tank. As part of Moeller Marine's livewell and bait tank line, it is designed to hold bait or catch and keep it in good condition while underway or at anchor.\u003c\/p\u003e\u003cp\u003eThe 042280-W is the white color option in this series; the same 23 gallon round livewell is also offered in light blue under part number 042280 for boat owners who want to match a different deck or console color scheme, since these are separate part numbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 042280-W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Livewells \u0026amp; Bait Tanks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 23 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729013793\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBatteries Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal round livewell; fits installations sized for a 20 inch wide, 18 inch tall round livewell opening.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Moeller Marine 042280-W livewell?\u003c\/strong\u003e The 042280-W is a 23 gallon round livewell measuring 20 inches in width and 18 inches in height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does part number 042280-W come in?\u003c\/strong\u003e Part number 042280-W is the white color version of this round livewell; the same 23 gallon round livewell is also made in light blue under part number 042280.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this livewell round or rectangular?\u003c\/strong\u003e The 042280-W is a round livewell, which makes it a good fit for console or deck cutouts sized for a circular tank rather than a rectangular one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 042280-W livewell weigh?\u003c\/strong\u003e This 23 gallon round livewell weighs 13 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons does the 042280-W hold?\u003c\/strong\u003e The Moeller Marine 042280-W holds 23 gallons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Moeller 042280-W livewell?\u003c\/strong\u003e The UPC for the white 23 gallon round livewell, part number 042280-W, is 739729013793.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 042280-W livewell require batteries?\u003c\/strong\u003e No, the 042280-W round livewell does not require batteries to operate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many livewells come in the package?\u003c\/strong\u003e The 042280-W ships as a single unit, with a package quantity of 1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Moeller Marine 042280-W livewell made?\u003c\/strong\u003e The 042280-W livewell's country of origin is the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between part number 042280 and 042280-W?\u003c\/strong\u003e Both are the same 23 gallon round livewell; 042280 is the light blue version and 042280-W is the white version, sold as distinct part numbers.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991092408539,"sku":"MOE-042280-W","price":385.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41WLNpC7UJL.jpg?v=1784491393"},{"product_id":"moeller-marine-042281-round-livewell-bait-tank-29-gallon-light-blue-23-in-diameter-x-17-in-high","title":"Moeller Marine 042281 Round Livewell, 49 Gallon, Light Blue, 23 in. Diameter x 17 in. Height","description":"\u003cp\u003eThe Moeller Marine 042281 is a round livewell built to hold 49 gallons (185 liters) of water, giving anglers a stable, high-volume tank for keeping bait or a catch alive and healthy on the water. The tank measures 23.00 inches in diameter and 17.00 inches in height (584 mm x 432 mm), a round profile that suits center-console and open-deck boat layouts where a compact footprint with strong volume is needed. It is finished in Light Blue, a color that helps anglers see fish and bait clearly against the tank walls. The round shape also distributes water pressure evenly around the tank walls, which is a common reason boat builders and anglers favor round livewells over rectangular designs for large-capacity installations.\u003c\/p\u003e\u003cp\u003eThis 49-gallon capacity places the 042281 in the same size family as the Moeller 042282 and 042284 round livewells, which are offered in other diameter and height combinations at the same 49-gallon capacity, so buyers can match the tank profile to the available space in their boat. A White version of this same 23 in. X 17 in., 49-gallon tank is sold separately as part number 042281-W for buyers who prefer that finish.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 042281\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Light Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 49 Gallons (185 Liters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 23.00 inches (584 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 17.00 inches (432 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729013731\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Livewells \u0026amp; Bait Tanks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons does the Moeller Marine 042281 livewell hold?\u003c\/strong\u003e The 042281 holds 49 gallons (185 liters) of water, making it a high-capacity round livewell for keeping bait or a catch alive on board.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this livewell?\u003c\/strong\u003e The Moeller Marine 042281 measures 23.00 inches in diameter and 17.00 inches in height (584 mm x 432 mm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 042281?\u003c\/strong\u003e Part number 042281 is finished in Light Blue. The same 23 in. X 17 in., 49-gallon tank is also available in White under part number 042281-W, which is a separate SKU.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this livewell round or rectangular?\u003c\/strong\u003e The Moeller Marine 042281 is a round livewell, a shape that distributes water pressure evenly around the tank walls at this 49-gallon capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 042281 livewell weigh?\u003c\/strong\u003e The Moeller Marine 042281 weighs 15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other sizes available in this same capacity?\u003c\/strong\u003e Yes, the 49-gallon round livewell line also includes part numbers 042282 and 042284, which are offered in other diameter and height combinations for different boat layouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Moeller Marine 042281 livewell?\u003c\/strong\u003e The UPC for the Moeller Marine 042281 livewell is 739729013731.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a round livewell typically used for?\u003c\/strong\u003e The Moeller Marine 042281 round livewell is used to hold bait or a catch alive in fresh, circulating water while on board a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I order the same tank size in a different color?\u003c\/strong\u003e Yes, the 23 in. X 17 in., 49-gallon tank is offered in Light Blue as part number 042281 and in White as part number 042281-W.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does the 042281 livewell fall under?\u003c\/strong\u003e The Moeller Marine 042281 is listed under Livewells \u0026amp; Bait Tanks.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991092474075,"sku":"MOE-042281","price":415.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/519zRDhjHkL_3c6fb0ee-a140-492f-a4bd-a63357c251e8.jpg?v=1784491402"},{"product_id":"moeller-marine-042282-w-26-gallon-oval-livewell-bait-tank-white-seamless-polyethylene","title":"Moeller 26 Gallon Round Livewell, White, Part 042282-W","description":"\u003cp\u003eThe Moeller 042282-W is a 26 gallon round livewell built for boaters who need reliable onboard bait or catch storage. It is molded in one seamless piece of rotationally-molded polyethylene, a construction method that eliminates seams and weak points, giving the tank consistent wall thickness and long-term durability against constant water exposure and UV. The tank features molded-in deck fasteners that allow for easy hold-down to the boat deck, and it ships with a drain plug for quick draining and cleaning between trips.\u003c\/p\u003e\u003cp\u003eThis 26 gallon round livewell measures 28.00 inches by 16.38 inches by 16.00 inches and weighs 15 pounds. It is finished in white and comes with a lid. The same tank is also offered in Light Blue as part number 042282 for boaters who want to match a different deck or hull color scheme, with identical dimensions and construction to this white version.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 042282-W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Livewell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 26 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Round well\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyethylene (rotationally molded)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 28.00 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 16.38 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 16.00 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith Lid:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729013816\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrain Plug:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons does the Moeller 042282-W livewell hold?\u003c\/strong\u003e The Moeller 042282-W holds 26 gallons and measures 28.00 inches by 16.38 inches by 16.00 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 042282-W livewell made of?\u003c\/strong\u003e It is molded in one seamless piece of rotationally-molded polyethylene, which gives the tank consistent wall thickness with no seams to leak or weaken over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this livewell come with a lid?\u003c\/strong\u003e Yes, the Moeller 042282-W includes a lid as part of the unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a drain for cleaning the livewell?\u003c\/strong\u003e Yes, the 042282-W ships with a drain plug for quick draining and easy cleaning between trips.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 042282-W livewell mounted to the boat deck?\u003c\/strong\u003e It features molded-in deck fasteners that allow it to be secured directly to the boat deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 042282-W?\u003c\/strong\u003e 042282-W is finished in white. The same tank is also available in Light Blue under part number 042282.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 042282-W livewell round or oval?\u003c\/strong\u003e The 042282-W is a round livewell, listed under the round well container type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 26 gallon livewell weigh?\u003c\/strong\u003e The 042282-W weighs 15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Moeller 042282-W livewell?\u003c\/strong\u003e The UPC for the Moeller 042282-W 26 gallon round livewell is 739729013816.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the white 042282-W and Light Blue 042282 livewells be used interchangeably?\u003c\/strong\u003e Yes, aside from color the 042282-W and 042282 are the same tank, sharing identical dimensions and rotationally-molded polyethylene construction.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991092572379,"sku":"MOE-042282-W","price":444.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41WLNpC7UJL_04ddcd84-56ca-4912-8322-20060be9438c.jpg?v=1784491414"},{"product_id":"moeller-marine-042283-49-gallon-round-livewell-bait-tank-light-blue-lldpe-29-x-18-in","title":"Moeller 49 Gallon Round Livewell, Light Blue, 29.00 x 18.00 Inches - Part 042283","description":"\u003cp\u003eThe Moeller 042283 is a round livewell built to hold 49 gallons, sized at 29.00 x 18.00 inches (737 mm x 457 mm). It is molded from linear low density polyethylene (LLDPE), a thermoplastic resin that is liquid when heated and solid when cooled, which gives the tank excellent chemical and corrosion resistance while keeping the material highly recyclable. This construction makes the tank well suited to holding bait and livewell water aboard a boat, resisting the corrosive effects of saltwater and fuel\/chemical exposure common in marine bait storage.\u003c\/p\u003e\u003cp\u003eThis part number, 042283, is the Light Blue color option. The same round tank in the same 29.00 x 18.00 inch size is also available in White as part number 042283-W, and a larger round livewell measuring 36.50 x 25.00 inches (927 mm x 635 mm) is sold separately as part number 042285 (with its own White version, 042285-W), so buyers who need more capacity or a different color can order the matching part number. The 042283 weighs 25.5 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 042283\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Livewell \/ Bait Tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 49 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Light Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 29.00 inches (737 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 18.00 inches (457 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Linear Low Density Polyethylene (LLDPE)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 25.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729013755\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the capacity of the Moeller 042283 livewell?\u003c\/strong\u003e The Moeller 042283 round livewell holds 49 gallons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this livewell?\u003c\/strong\u003e Part number 042283 measures 29.00 x 18.00 inches, which is 737 mm x 457 mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Moeller 042283 livewell made from?\u003c\/strong\u003e It is made from linear low density polyethylene (LLDPE), a thermoplastic resin that offers excellent chemical and corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 042283 livewell weigh?\u003c\/strong\u003e This livewell weighs 25.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 042283?\u003c\/strong\u003e 042283 is the Light Blue version of this round Moeller livewell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a white version of this livewell available?\u003c\/strong\u003e Yes, the same 29.00 x 18.00 inch round tank is also sold in White as Moeller part number 042283-W.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape is the Moeller 042283 livewell?\u003c\/strong\u003e The 042283 is a round livewell, as opposed to a rectangular tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs LLDPE resistant to saltwater and chemical exposure?\u003c\/strong\u003e Yes, the LLDPE used in the 042283 livewell provides excellent chemical and corrosion resistance, which suits it to marine bait tank use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Moeller 042283 livewell recyclable?\u003c\/strong\u003e Yes, LLDPE is a highly recyclable thermoplastic, so the 042283 livewell is made from a recyclable material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Moeller 042283 livewell?\u003c\/strong\u003e The UPC for the 29.00 x 18.00 inch Light Blue 042283 livewell is 739729013755.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 042283 livewell used for bait storage?\u003c\/strong\u003e Yes, the 042283 is categorized as a livewell \/ bait tank and is built to hold bait and livewell water aboard a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between part 042283 and part 042285?\u003c\/strong\u003e 042283 measures 29.00 x 18.00 inches while 042285 is a larger round livewell measuring 36.50 x 25.00 inches (927 mm x 635 mm); both are separate part numbers with their own Light Blue and White (042285-W) options.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991096930523,"sku":"MOE-042283","price":557.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/519zRDhjHkL_7ff5f42f-fe37-4aca-ad6d-5c98e4cd895d.jpg?v=1784491420"},{"product_id":"moeller-marine-11-16-in-id-deck-bait-well-drain-plug-2-pack-mpn-053071-10","title":"Moeller Marine Deck and Bait Well Drain Plug, 11\/16 Inch, 2-Pack, Part Number 053071-10","description":"\u003cp\u003eThis Moeller Marine deck and bait well plug is a 11\/16 inch inside diameter plug sold as a 2-pack, part number 053071-10. It is designed to seal deck and bait well drain openings on a boat, and the 2-pack keeps a spare on hand in case one is lost or damaged. Each pack weighs 0.2 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 053071-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter:\u003c\/strong\u003e 11\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729018385\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this deck plug?\u003c\/strong\u003e The Moeller Marine plug, part number 053071-10, has an 11\/16 inch inside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many plugs are included?\u003c\/strong\u003e Moeller Marine part number 053071-10 is sold as a 2-pack of deck and bait well plugs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number?\u003c\/strong\u003e The manufacturer part number for this Moeller Marine deck and bait well plug is 053071-10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes this plug?\u003c\/strong\u003e This deck and bait well plug is manufactured by Moeller Marine, part number 053071-10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 2-pack weigh?\u003c\/strong\u003e The Moeller Marine 053071-10 2-pack of plugs weighs 0.2 pounds total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this plug used for?\u003c\/strong\u003e Part number 053071-10 is intended for sealing deck and bait well drain openings on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Moeller Marine part?\u003c\/strong\u003e Yes, part number 053071-10 is a genuine Moeller Marine deck and bait well plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this item?\u003c\/strong\u003e The UPC for the Moeller Marine 053071-10 2-pack is 739729018385.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just one plug instead of two?\u003c\/strong\u003e Moeller Marine part number 053071-10 is sold as a 2-pack, not as a single plug.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991096996059,"sku":"MOE-053071-10","price":7.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MOE-053071-10_1__40282.1780061501.500.750.jpg?v=1785329133"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/41yfEiza96L.jpg?v=1785356903","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-fishing-accessories.oembed?page=2","provider":"Good Vibes Marina","version":"1.0","type":"link"}