{"title":"Interior \u0026 Courtesy Lighting","description":null,"products":[{"product_id":"sea-dog-400190-1-dome-light-4-lens-304-stainless-steel-with-on-off-toggle-switch-12v-dc","title":"Sea-Dog Dome Light 4 Inch Lens 304 Stainless Steel 12V Surface Mount Cabin Light 400190-1","description":"\u003cp\u003eThe Sea-Dog 400190-1 is a 4 inch dome light built for boat cabins, helms, and below-deck spaces where a durable, corrosion-resistant fixture is needed. It is stamped from 304 stainless steel, so it resists the salt air and moisture common on board without pitting or rusting over time. The light comes prewired with an on\/off toggle switch built into the housing, so there is no separate switch to source or install, and it operates on a 12VDC electrical system, matching standard marine wiring.\u003c\/p\u003e\u003cp\u003eIt ships with an 18.4 watt DC double contact bayonet bulb already in place, giving a bright, functional light source out of the box. For boaters who want to move to LED, the fixture can be converted using a double contact bayonet base G4 adapter (sold separately, part number 442042-1), which lets a BA15D-style socket accept a G4 LED bulb. The dome light surface mounts using three RH fasteners, which are not included, so plan to have your own on hand for installation.\u003c\/p\u003e\u003cp\u003eThis is a general-purpose cabin light rather than a fitment-specific replacement part, so it works in any boat, cabin, or enclosed space where a 4 inch surface-mount dome light with a stainless steel housing is wanted.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 400190-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dome Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 Stainless Steel (stamped)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Diameter (A):\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 5-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #4 RH (fasteners not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Included:\u003c\/strong\u003e 18.4 watt DC double contact bayonet bulb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e Prewired on\/off toggle switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Conversion:\u003c\/strong\u003e Compatible with double contact bayonet base G4 adapter, part number 442042-1 (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.624 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each \/ 5 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the lens on this dome light?\u003c\/strong\u003e The Sea-Dog 400190-1 has a 4 inch lens, which is the smaller of the two dome light sizes Sea-Dog offers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 400190-1 dome light made of?\u003c\/strong\u003e It is stamped from 304 stainless steel, which resists corrosion from salt air and moisture in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 400190-1 dome light come with a switch?\u003c\/strong\u003e Yes, the 400190-1 is prewired with a built-in on\/off toggle switch, so no separate switch needs to be added.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this dome light run on?\u003c\/strong\u003e The Sea-Dog 400190-1 operates on a 12VDC electrical system, standard for most boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bulb comes with the 400190-1?\u003c\/strong\u003e An 18.4 watt DC double contact bayonet bulb is included with the 400190-1 dome light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this dome light be converted to LED?\u003c\/strong\u003e Yes, the 400190-1 can be converted to LED using a double contact bayonet base G4 adapter, part number 442042-1, sold separately, which allows a G4 LED bulb to be used in the BA15D-style socket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with the 400190-1?\u003c\/strong\u003e No, the 400190-1 surface mounts with three #4 RH fasteners, but these fasteners are not included and must be supplied separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 400190-1 dome light weigh?\u003c\/strong\u003e The Sea-Dog 400190-1 dome light weighs 0.624 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 400190-1 dome light?\u003c\/strong\u003e The 400190-1 measures 4 inches (A) by 5-1\/2 inches (B) by 2 inches (C).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a replacement lens available for the 400190-1?\u003c\/strong\u003e Sea-Dog offers a separate replacement lens sized for the 4 inch dome light line, sold under its own part number rather than as part of the 400190-1 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 400190-1 dome light mounted?\u003c\/strong\u003e It is a surface-mount fixture, attached with three RH fasteners (not included) directly to the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the standard pack quantity for the 400190-1?\u003c\/strong\u003e The 400190-1 is available in a standard pack of 1 each or 5 each.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988764242139,"sku":"S-D-400190-1","price":33.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4898.jpg?v=1784429015"},{"product_id":"sea-dog-400730-3-led-cabin-reading-light-adjustable-warm-white-g4-led-150-lumens-10-30vdc-ip55-silver-finish","title":"Sea-Dog LED Cabin\/Reading Light with Adjustable Angle, Silver Finish, 10-30 Volt DC, 400730-3","description":"\u003cp\u003eThe Sea-Dog 400730-3 is an LED cabin\/reading light built for interior boat lighting where a directed, adjustable beam is needed. The light head pivots to an adjustable angle so the beam can be aimed exactly where it is needed, whether over a berth, chart table, or seating area. It ships with a G4 LED 2 Watt bulb producing a warm white output of 150 lumens, giving bright, even illumination without the heat or amperage draw of an incandescent bulb.\u003c\/p\u003e\u003cp\u003eThe fixture is prewired with an integral on\/off rocker switch, so no separate switch or additional wiring is required at installation, simplifying the wiring run to a straightforward 10-30 Volt DC power connection. The housing is molded plastic finished in silver, and the light carries an IP55 rating for resistance to dust and water spray, suiting it to cabin, galley, and other interior or semi-protected marine locations. It mounts with four #6 flat head fasteners, which are included, making it a self-contained, ready-to-install fixture.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 400730-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Type:\u003c\/strong\u003e G4 LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Wattage:\u003c\/strong\u003e 2 Watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Color:\u003c\/strong\u003e Warm White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Output:\u003c\/strong\u003e 150 lumens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 10-30 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP Rating:\u003c\/strong\u003e IP55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e Integral on\/off rocker switch, prewired\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Angle:\u003c\/strong\u003e Adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #6 FH, included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 2-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 4-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 4-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.22 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514404808\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat bulb comes with the Sea-Dog 400730-3 cabin light?\u003c\/strong\u003e The Sea-Dog 400730-3 LED cabin\/reading light ships with a G4 LED 2 Watt bulb that produces a warm white light output of 150 lumens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the light angle be adjusted?\u003c\/strong\u003e Yes, the 400730-3 has an adjustable light angle so the beam can be directed where it is needed, such as over a reading area or berth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this light run on?\u003c\/strong\u003e This Sea-Dog LED cabin\/reading light operates on 10-30 Volts DC, covering standard 12V and 24V marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 400730-3 have a built-in switch?\u003c\/strong\u003e Yes, it is prewired with an integral on\/off rocker switch, so no separate switch needs to be installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 400730-3 water resistant?\u003c\/strong\u003e It carries an IP55 rating, which means it is protected against dust ingress and water spray, making it suitable for cabin and interior marine locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing made of?\u003c\/strong\u003e The Sea-Dog 400730-3 LED cabin\/reading light has a plastic housing with a silver finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install this light, and are they included?\u003c\/strong\u003e Installation uses four #6 flat head fasteners, which are included with the 400730-3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 400730-3 light?\u003c\/strong\u003e The Sea-Dog 400730-3 measures 2-3\/4 inches by 2-5\/8 inches by 4-3\/4 inches by 4-1\/4 inches across its A, B, C, and D dimensions respectively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this light weigh?\u003c\/strong\u003e The Sea-Dog 400730-3 LED cabin\/reading light weighs 0.22 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many lumens does the 400730-3 produce?\u003c\/strong\u003e 150 lumens is the output of the Sea-Dog 400730-3 LED cabin\/reading light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 400730-3?\u003c\/strong\u003e The UPC for the Sea-Dog 400730-3 LED cabin\/reading light is 035514404808.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere would this light typically be installed on a boat?\u003c\/strong\u003e The Sea-Dog 400730-3, with its adjustable angle and IP55 rating, is intended for interior use such as cabin, berth, or reading area lighting.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988765126875,"sku":"S-D-400730-3","price":48.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6954.jpg?v=1784429022"},{"product_id":"sea-dog-400400-1-small-polished-brass-berth-light-12v-prewired-bulkhead-wall-reading-light-with-on-off-switch","title":"Sea-Dog Small Brass Berth Light 400400-1, 12V with On\/Off Switch","description":"\u003cp\u003eThe Sea-Dog Small Brass Berth Light (400400-1) is a bulkhead or wall-mounted cabin light built from machined and stamped brass with a lacquer coating that resists tarnish. The polished brass housing is finished with solid brass knurled adjusting knobs, and the interior surface of the lamp shade is coated in white enamel to reflect more light into the cabin. The light is prewired with an integral on\/off switch, so it is ready to hook into a 12VDC circuit without additional switch wiring.\u003c\/p\u003e\u003cp\u003eIt ships with a 12 volt, 15 watt DC bulb using a double contact bayonet base. If you prefer LED lighting, the fixture can be converted using a double contact bayonet base G4 adapter (442042-1, sold separately) paired with a G4 bulb (also sold separately). Installation is straightforward: the light mounts with three #6 round head fasteners, which are not included, so have them on hand before installing. This is the Small size in the Sea-Dog berth light lineup; a Large version (400410-1) is also available with larger overall dimensions for buyers who want a bigger fixture.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 400400-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Small Berth Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions (A x B x C x D):\u003c\/strong\u003e 3-9\/16 inches x 2-15\/16 inches x 3-3\/4 inches x 4-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Machined and Stamped Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished Brass with Lacquer Coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLamp Shade Interior:\u003c\/strong\u003e White Enamel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 15 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Type:\u003c\/strong\u003e Double Contact Bayonet Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Glass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Smoke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e Integral On\/Off Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bulkhead or Wall Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #6 RH (Round Head), Not Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514400282\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 400400-1 berth light made of?\u003c\/strong\u003e It is made of machined and stamped brass with a lacquer coating to prevent tarnish, and the interior of the lamp shade is finished in white enamel to reflect more light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this berth light?\u003c\/strong\u003e The Sea-Dog 400400-1 Small Berth Light measures 3-9\/16 inches by 2-15\/16 inches by 3-3\/4 inches by 4-3\/8 inches (dimensions A through D) and weighs 0.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the berth light come with a bulb?\u003c\/strong\u003e Yes, the 400400-1 includes a 12 volt, 15 watt DC bulb with a double contact bayonet base, and it is prewired with an integral on\/off switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this light be converted to LED?\u003c\/strong\u003e The 400400-1 can be converted to LED using a double contact bayonet base G4 adapter (442042-1) along with a G4 bulb, both sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this light run on?\u003c\/strong\u003e The Sea-Dog Small Brass Berth Light operates on 12VDC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 400400-1 berth light mounted?\u003c\/strong\u003e It is designed for bulkhead or wall mounting and installs with three #6 round head fasteners, which are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a larger version of this berth light?\u003c\/strong\u003e Yes, Sea-Dog also offers a Large berth light (400410-1) with bigger overall dimensions; the 400400-1 is the Small size in the lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the light housing and lens?\u003c\/strong\u003e The 400400-1 has a polished brass housing with solid brass knurled adjusting knobs, and the lens is smoke-colored glass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Sea-Dog 400400-1 berth light manufactured?\u003c\/strong\u003e The country of origin for this berth light is China.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I order a replacement bulb for this light separately?\u003c\/strong\u003e Yes, a replacement double contact bayonet base bulb (441142-1) is available separately for the Sea-Dog 400400-1 berth light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the berth light have a built-in switch?\u003c\/strong\u003e Yes, the 400400-1 is prewired with an integral on\/off switch so no separate switch wiring is needed.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988765880539,"sku":"S-D-400400-1","price":86.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6703.jpg?v=1784429030"},{"product_id":"sea-dog-400200-1-stainless-steel-dome-light-with-on-off-switch-5-in-lens-12vdc","title":"Sea-Dog Stainless Steel Dome Light with 5 Inch Lens, 400200-1, 12 Volt","description":"\u003cp\u003eThe Sea-Dog 400200-1 is a 5 inch lens dome light built for boat cabins, cockpits, and interior spaces where reliable overhead lighting is needed. The housing and trim are constructed of stamped 304 stainless steel for corrosion resistance in the marine environment. The fixture is prewired with an on\/off toggle switch, so installation only requires running power and mounting the fixture; no separate switch wiring is needed. It is supplied with a 12 volt, 18.4 watt DC double contact bayonet bulb, ready to run on standard 12V DC boat electrical systems.\u003c\/p\u003e\u003cp\u003eFor boaters who prefer LED lighting, the 400200-1 can be converted using a bayonet bulb socket adapter (442042-1) with a BA15D style base and a G4 bulb, both sold separately. The fixture surface mounts using three #6 RH fasteners, which are not included. Replacement parts are available separately, including a matching 5 inch replacement lens (400201-1) and a replacement double contact bayonet bulb (441142-1) sized for this fixture. A smaller 4 inch lens version of this dome light is also offered as a separate part (400190-1) for boaters who need a more compact fixture.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 400200-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stamped 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Diameter (A):\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (B):\u003c\/strong\u003e 6-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height (C):\u003c\/strong\u003e 2-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Type:\u003c\/strong\u003e 18.4 Watt DC Double Contact Bayonet Bulb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size:\u003c\/strong\u003e #6 RH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface Mount, Three Fasteners (Not Included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e On\/Off Toggle Switch (Prewired)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.82 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514400350\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e SDG4002001\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal surface-mount fitment for boat cabins, cockpits, and interior spaces; not specific to a particular boat make, model, or engine.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSDG4002001\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size lens does the Sea-Dog 400200-1 dome light have?\u003c\/strong\u003e The Sea-Dog 400200-1 has a 5 inch lens, making it the larger of Sea-Dog's stamped stainless dome light options.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 400200-1 dome light run on?\u003c\/strong\u003e It runs on 12 volts DC, matching standard boat electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 400200-1 come with a bulb?\u003c\/strong\u003e Yes, the fixture is supplied with a 12 volt, 18.4 watt DC double contact bayonet bulb already wired in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 400200-1 dome light made of?\u003c\/strong\u003e It is constructed of stamped 304 stainless steel for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 400200-1 dome light mounted?\u003c\/strong\u003e The 400200-1 surface mounts using three #6 RH fasteners, which are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Sea-Dog 400200-1 be converted to LED?\u003c\/strong\u003e Yes, it can be converted to LED using a bayonet bulb socket adapter (442042-1) with a BA15D style base and a G4 bulb, both sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 400200-1 dome light?\u003c\/strong\u003e The Sea-Dog 400200-1 measures 5 inches for the lens (A), 6-3\/4 inches (B), and 2-1\/8 inches (C).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 400200-1 weigh?\u003c\/strong\u003e The 400200-1 dome light weighs 0.82 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a smaller version of the Sea-Dog 400200-1 dome light?\u003c\/strong\u003e Yes, Sea-Dog also offers a 4 inch lens version as a separate part, 400190-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the OEM equivalent part number for the Sea-Dog 400200-1?\u003c\/strong\u003e The 400200-1 has an OEM equivalent part number of SDG4002001.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a replacement lens available for the 400200-1?\u003c\/strong\u003e Yes, a matching 5 inch replacement lens, part number 400201-1, is available separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 400200-1 have a built-in switch?\u003c\/strong\u003e Yes, the 400200-1 is prewired with an on\/off toggle switch.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988766044379,"sku":"S-D-400200-1","price":45.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4898_29e99c9d-c9b2-46d1-9608-4ebe0232fecd.jpg?v=1784429031"},{"product_id":"sea-dog-400354-1-5-inch-led-day-night-dome-light-for-boat-cabins-12v-white-red-led-interior-light","title":"Sea-Dog 400354-1 Stainless Steel LED Day\/Night Dome Light, 12 Volt Universal Fit Boat Cabin Light","description":"\u003cp\u003eThe Sea-Dog 400354-1 is a stainless steel day\/night dome light built for boat cabins, helms, and interior spaces where low-current LED lighting is needed. The fixture uses 15 white LEDs for standard daytime illumination and 5 red LEDs for night-vision-friendly lighting that preserves your eyes' adjustment to the dark, a common feature on boats for nighttime navigation and helm use. Running on 12 volts, the light draws just 0.068 amps, giving it an extremely low current draw and a long service life while minimizing the load on your boat's electrical system.\u003c\/p\u003e\u003cp\u003eThe housing and shade are stainless steel for corrosion resistance in a marine environment, paired with a water-resistant construction that holds up to the damp conditions typical belowdecks or in a cockpit. The dome light has a universal fit, meaning it is not designed for one specific make or model of boat and can be installed wherever a surface-mount cabin light is needed. It is a single-unit light (one light per package) intended for interior use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 400354-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Configuration:\u003c\/strong\u003e 15 white LEDs and 5 red LEDs (day\/night)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 0.068 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 15 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing\/Shade Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White and Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Country\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 11.77 inches D x 7.87 inches W x 2.01 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Use:\u003c\/strong\u003e Interior\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal-fit fixture and is not limited to a specific boat make, model, or engine.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat makes this a day\/night dome light?\u003c\/strong\u003e The Sea-Dog 400354-1 has two LED settings in one fixture: 15 white LEDs for normal daytime cabin lighting and 5 red LEDs for nighttime use, since red light helps preserve night vision at the helm or in a cabin after dark.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 400354-1 fit my boat?\u003c\/strong\u003e Yes, this dome light has a universal fit and is not built for one specific boat make or model, so it can be surface-mounted in any cabin, helm, or interior location that needs a 12 volt LED dome light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the light housing made of?\u003c\/strong\u003e The housing and shade of the Sea-Dog 400354-1 are stainless steel for corrosion resistance in a marine environment, with a plastic lens covering the LEDs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much power does this light draw?\u003c\/strong\u003e Running on 12 volts, the Sea-Dog 400354-1 draws only 0.068 amps, giving it a very low current draw that is easy on a boat's battery and electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 400354-1 waterproof?\u003c\/strong\u003e It is rated water resistant, making it suitable for the damp conditions common in a boat cabin or cockpit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this dome light?\u003c\/strong\u003e The Sea-Dog 400354-1 measures 11.77 inches in diameter, 7.87 inches wide, and 2.01 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the light weigh?\u003c\/strong\u003e The Sea-Dog 400354-1 dome light weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many LEDs are in the fixture?\u003c\/strong\u003e There are 20 total LEDs in the Sea-Dog 400354-1: 15 white LEDs for daytime lighting and 5 red LEDs for the night setting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this light?\u003c\/strong\u003e Each order includes one Sea-Dog 400354-1 stainless steel day\/night dome light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this light intended for interior or exterior use?\u003c\/strong\u003e The Sea-Dog 400354-1 is intended for interior use, such as a boat cabin or below-deck space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color light does the fixture produce?\u003c\/strong\u003e The Sea-Dog 400354-1 produces white light in daytime mode and red light in night mode, using its dual LED sets.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988769648859,"sku":"S-D-400353-1","price":63.67,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8438.jpg?v=1784429045"},{"product_id":"sea-dog-401725-1-led-dome-light-chrome-12v-prewired-cabin-light-with-on-off-rocker-switch-18-white-leds","title":"Sea-Dog LED Dome Light, Chrome Finish, 12 Volt Surface Mount, 401725-1","description":"\u003cp\u003eThe Sea-Dog 401725-1 is a chrome-finished LED dome light built for boat cabins, helms, and interior spaces where reliable, low-draw lighting is needed. It is prewired with an on\/off rocker switch, so it installs and operates as a self-contained fixture without additional wiring for switching. The light runs on 12 volts and draws just 0.068 amps, which keeps heat output very low and battery drain minimal even when left on for extended periods. Inside the fixture are 18 white LEDs, giving even, bright coverage for cabins, galleys, staterooms, and other below-deck areas.\u003c\/p\u003e\u003cp\u003eThe housing is molded from corrosion resistant, lightweight plastic and finished in chrome, making it well suited to the humid, salt-exposed conditions common on boats. It surface mounts using #8 RH fasteners, which are not included, so it can be installed on a cabin ceiling, overhead panel, or bulkhead with standard hardware on hand. Overall dimensions are 4 inches for dimension A, 5-3\/4 inches for dimension B, and 1-5\/8 inches for dimension C, and the fixture weighs 0.25 pounds. Because the LEDs are rated for extremely long service life, the 401725-1 is designed to be a fit-and-forget lighting solution rather than something that needs bulb replacement. It is also available in a white finish under a separate part number for buyers who prefer that look.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 401725-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e LED Dome Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 0.068 amps at 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Count:\u003c\/strong\u003e 18 white LEDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Prewired on\/off rocker switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #8 RH (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 5-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Sea-Dog 401725-1 dome light come in?\u003c\/strong\u003e The Sea-Dog 401725-1 has a chrome finish. A white-finish version of the same style light is available under a different part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many LEDs are in this dome light?\u003c\/strong\u003e The 401725-1 dome light contains 18 white LEDs, providing even interior lighting for cabins and other below-deck spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the light have a built-in switch?\u003c\/strong\u003e Yes, the Sea-Dog 401725-1 is prewired with an on\/off rocker switch, so no separate switch needs to be installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much power does this dome light draw?\u003c\/strong\u003e Current draw is 0.068 amps at 12 volts, which keeps heat output low and minimizes battery drain during extended use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 401725-1 dome light?\u003c\/strong\u003e The fixture measures 4 inches for dimension A, 5-3\/4 inches for dimension B, and 1-5\/8 inches for dimension C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the light weigh?\u003c\/strong\u003e The Sea-Dog 401725-1 LED dome light weighs 0.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing made of?\u003c\/strong\u003e The housing is molded from corrosion resistant, lightweight plastic, finished in chrome for the 401725-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to mount this light, and are they included?\u003c\/strong\u003e The 401725-1 surface mounts using #8 RH fasteners, which are not included and must be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a 12 volt light?\u003c\/strong\u003e Yes, the Sea-Dog 401725-1 operates on 12 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 401725-1 different from the Sea-Dog LED Day\/Night Dome Light?\u003c\/strong\u003e The 401725-1 uses a single circuit of 18 white LEDs with an on\/off rocker switch, while the LED Day\/Night Dome Light has an on\/off\/on switch and two separate circuits, one with a clear bulb and one with a red night vision bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this light mounted?\u003c\/strong\u003e The 401725-1 is a surface-mount fixture that attaches with #8 RH fasteners, not included, to a cabin ceiling, overhead panel, or bulkhead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the dome light resistant to vibration?\u003c\/strong\u003e Yes, the Sea-Dog 401725-1 is built to be vibration resistant, which suits it to onboard use where constant motion is a factor.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988770336987,"sku":"S-D-401725-1","price":39.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5998.jpg?v=1784429067"},{"product_id":"sea-dog-401727-1-led-dome-light-white-plastic-18-white-leds-12v-prewired-with-on-off-rocker-switch","title":"Sea-Dog LED Dome Light, White, 4 Inch Surface Mount Cabin Light, 12 Volt","description":"\u003cp\u003eThis Sea-Dog LED Dome Light is a surface-mount cabin light built for boat interiors that need reliable, low-heat lighting with a long service life. It runs on 12 volts and draws just 0.068 amps, so it can stay on for extended periods without straining a house battery or generating noticeable heat. The light is prewired with an on\/off rocker switch, making it a straightforward swap for an existing dome light or a clean addition to a cabin, head, cockpit locker, or berth area. Inside the fixture are 18 white LEDs, giving even, bright coverage for a fixture this size.\u003c\/p\u003e\u003cp\u003eThe housing is molded from corrosion-resistant, lightweight plastic finished in white, which resists the salt air and humidity common in marine cabin and below-deck environments. It surface mounts using #8 RH fasteners (fasteners are not included) and measures 4 inches by 5-3\/4 inches by 1-5\/8 inches, so it fits standard dome light cutouts and mounting patterns used across many boats. Because it is vibration resistant, it holds up to the constant motion and pounding a boat experiences underway, unlike lighter household fixtures. At 0.25 pounds, it is easy to handle during installation and adds negligible weight to a cabin headliner or overhead panel.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 401727-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Count:\u003c\/strong\u003e 18 white LEDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 0.068 amps at 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e On\/off rocker switch, prewired\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #8 RH (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 5-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514402705\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each (also available in a case pack of 5)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal surface-mount cabin light and is not restricted to a specific boat make or model; it fits any application with a compatible mounting footprint of 4 inches by 5-3\/4 inches.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea-Dog 401727-1 dome light?\u003c\/strong\u003e The Sea-Dog 401727-1 has a white plastic finish, distinguishing it from the chrome-finished version of the same light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many LEDs does this dome light have?\u003c\/strong\u003e There are 18 white LEDs in the Sea-Dog 401727-1 dome light, providing even overhead lighting for a cabin or berth area.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this light run on?\u003c\/strong\u003e 12 volts is the operating voltage for the Sea-Dog 401727-1 LED dome light, standard for most boat electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much power does the dome light draw?\u003c\/strong\u003e Current draw is only 0.068 amps at 12 volts, which is why the Sea-Dog 401727-1 produces very little heat and can run for long periods without a meaningful drain on the battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the light have a built-in switch?\u003c\/strong\u003e Yes, the Sea-Dog 401727-1 comes prewired with an on\/off rocker switch, so no separate switch needs to be installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the mounting dimensions?\u003c\/strong\u003e The Sea-Dog 401727-1 measures 4 inches by 5-3\/4 inches by 1-5\/8 inches and surface mounts using #8 RH fasteners, which are not included with the light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fixture made of?\u003c\/strong\u003e Corrosion-resistant, lightweight plastic makes up the housing of the Sea-Dog 401727-1, which is built to hold up in a marine cabin environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this dome light weigh?\u003c\/strong\u003e 0.25 pounds is the weight of the Sea-Dog 401727-1 LED dome light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this light vibration resistant?\u003c\/strong\u003e Yes, the Sea-Dog 401727-1 is designed to be vibration resistant, which suits it to the constant motion of a boat underway.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a chrome version of this light available?\u003c\/strong\u003e Yes, Sea-Dog offers the same dome light in a chrome finish under part number 401725-1, alongside this white version, 401727-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included in the box?\u003c\/strong\u003e No, the #8 RH fasteners needed to surface mount the Sea-Dog 401727-1 are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this light be used anywhere on a boat?\u003c\/strong\u003e The Sea-Dog 401727-1 is a universal surface-mount fixture suited to cabins, heads, berths, and similar overhead applications wherever its 4 inch by 5-3\/4 inch mounting footprint fits.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988770402523,"sku":"S-D-401727-1","price":35.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5998_23e18ddb-b162-48f4-bab5-40344c27c138.jpg?v=1784429072"},{"product_id":"sea-dog-441891-1-halogen-light-bulb-20w-700-candlepower-12v-g4-bi-pin-jc-type-sold-per-pair","title":"Sea-Dog 441891-1 12V 20W Halogen Bi-Pin Light Bulb, 700 Candlepower","description":"\u003cp\u003eThe Sea-Dog 441891-1 is a 12.8VDC halogen replacement bulb built for marine light fixtures that use a JC-type, bi-pin, G4-style base. It draws 1.66 amps at 20 watts and produces 700 candlepower, giving a bright, focused output suited to interior cabin lights, deck lights, and other small marine fixtures that accept a bi-pin G4 halogen bulb. The bulb has a glass envelope and a compact 1-1\/4 inch overall length, keeping it a direct drop-in for fixtures designed around this bulb size and base style.\u003c\/p\u003e\u003cp\u003eThis is the 20-watt, 700-candlepower version in the Sea-Dog bi-pin bulb lineup; a lower-output 10-watt, 350-candlepower version (441890-1) is also available in the same base style for fixtures that call for less light output. The 441891-1 is sold per pair, so each package supplies two bulbs, and each bulb weighs 0.016 pounds. As a glass halogen bulb, it should be installed and handled the same as any halogen lamp: avoid touching the glass with bare fingers and make sure the fixture is de-energized before installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 441891-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Type:\u003c\/strong\u003e JC bi-pin, G4-style halogen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 20 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 1.66 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12.8 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCandlepower:\u003c\/strong\u003e 700\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Width:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Glass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Sold per pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.016 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514441643\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits marine light fixtures designed for a JC-type, bi-pin, G4-style 12.8VDC halogen bulb with a 1-1\/4 inch overall length.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat base does the Sea-Dog 441891-1 bulb use?\u003c\/strong\u003e The 441891-1 uses a JC-type, bi-pin, G4-style base, so it fits fixtures built for a bi-pin G4 halogen bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many watts is the Sea-Dog 441891-1?\u003c\/strong\u003e It is rated at 20 watts, drawing 1.66 amps at 12.8VDC and producing 700 candlepower.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the 441891-1 bulb?\u003c\/strong\u003e The bulb measures 1-1\/4 inches overall in length with a base width of 5\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 441891-1 sold as a single bulb?\u003c\/strong\u003e No, the 441891-1 is sold per pair, so one package contains two bulbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 441891-1 bulb made of?\u003c\/strong\u003e It has a glass bulb envelope, standard for halogen lamps of this type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 441891-1 bulb weigh?\u003c\/strong\u003e Each Sea-Dog 441891-1 bulb weighs 0.016 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a lower-wattage version of this bulb?\u003c\/strong\u003e Yes, Sea-Dog also offers the 441890-1 in the same bi-pin G4 base style, rated at 10 watts and 350 candlepower versus the 20 watts and 700 candlepower of the 441891-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 441891-1 run on?\u003c\/strong\u003e The 441891-1 is a 12.8VDC halogen bulb, matching standard 12-volt marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install the 441891-1 replacement bulb?\u003c\/strong\u003e Disconnect power to the fixture, remove the old bi-pin bulb, and insert the Sea-Dog 441891-1 into the same G4-style bi-pin socket; avoid touching the glass with bare fingers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 441891-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, the 441891-1 is a genuine Sea-Dog manufacturer part number, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the candlepower output of the 441891-1?\u003c\/strong\u003e The Sea-Dog 441891-1 produces 700 candlepower of light output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fixtures is the 441891-1 bulb used in?\u003c\/strong\u003e It is intended for marine light fixtures built around a JC-type, bi-pin, G4-style 12.8VDC halogen bulb, such as interior and deck light fixtures using that base.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988817490139,"sku":"S-D-441891-1","price":9.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5154.jpg?v=1784429604"},{"product_id":"attwood-6350b7-led-micro-light-blue-compact-horizontal-vertical-bezel-courtesy-light-12v-dc","title":"Attwood LED Micro Light 6350B7, Blue, Vertical Mount, Stainless Steel Cover","description":"\u003cp\u003eThe Attwood LED Micro Light (6350B7) is a compact blue LED accent light built for boaters who need a bright, low-draw light source in a tight space. Its electro polished stainless steel cover gives the light a bright, finished look on deck or below, while the molded one-piece body keeps the electronics fully sealed against the marine environment. The light mounts vertically and attaches with a clamp-on fitting designed to work across a variety of surface thicknesses, making it easy to add interior or accent lighting without a complex installation.\u003c\/p\u003e\u003cp\u003ePowered by three C batteries (not included), the 6350B7 draws just 0.66 watts at 12 volts DC, delivering strong light output from LED technology that uses 66% less energy than a comparable incandescent light. It is intended for interior use and is not designed to meet Coast Guard navigation light regulations; it is also not intended for use on boats capable of exceeding 7 knots.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6350B7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Color:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Vertical, clamp-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover Material:\u003c\/strong\u003e Electro polished stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Construction:\u003c\/strong\u003e Molded one-piece body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Three C batteries (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Draw:\u003c\/strong\u003e 0.66 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Interior boat lighting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed Rating:\u003c\/strong\u003e Not for use on boats exceeding 7 knots\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulatory Note:\u003c\/strong\u003e Not intended to meet Coast Guard regulations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Package Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697263506\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the light on the Attwood 6350B7?\u003c\/strong\u003e The Attwood LED Micro Light 6350B7 emits blue light, making it suited for interior accent or courtesy lighting on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat powers the 6350B7 LED Micro Light?\u003c\/strong\u003e It runs on three C batteries, which are not included, so you will need to supply your own before installing the 6350B7.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Attwood LED Micro Light mounted?\u003c\/strong\u003e The 6350B7 mounts vertically and uses a clamp-on attachment that is designed to fit a variety of surface thicknesses, allowing installation without hardwiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the cover on this light stainless steel?\u003c\/strong\u003e Yes, the Attwood 6350B7 has an electro polished stainless steel cover that gives it a bright, finished appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much power does the 6350B7 draw?\u003c\/strong\u003e The Attwood LED Micro Light 6350B7 draws 0.66 watts at 12 volts DC, which is low compared to incandescent lighting of similar output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 6350B7 meet Coast Guard navigation light requirements?\u003c\/strong\u003e No, the 6350B7 is not intended to meet Coast Guard regulations and is meant for interior use, not as a required navigation light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this light be used on faster boats?\u003c\/strong\u003e No, the Attwood LED Micro Light 6350B7 is not intended for use on boats capable of exceeding 7 knots.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 6350B7 weigh?\u003c\/strong\u003e The Attwood LED Micro Light 6350B7 weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the body of the 6350B7 made from?\u003c\/strong\u003e The Attwood 6350B7 has a molded one-piece body that fully seals the internal electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many lights come in a package?\u003c\/strong\u003e The Attwood 6350B7 LED Micro Light is sold with an item package quantity of 1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose LED over an incandescent light for this application?\u003c\/strong\u003e The Attwood 6350B7 uses LED technology that consumes 66% less energy than a comparable incandescent light while still delivering strong output from a compact package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 6350B7 suitable for tight installation spaces?\u003c\/strong\u003e Yes, its compact size and clamp-on vertical mount make the Attwood LED Micro Light 6350B7 suited for numerous tight locations on a boat.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989671915739,"sku":"ATT-6350B7","price":26.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61aTipqd4rL.jpg?v=1784486945"},{"product_id":"attwood-6350w7-led-micro-light-white-stainless-steel-bezel-vertical-mount-12v-dc","title":"Attwood 6350W7 LED Micro Light, Vertical Mount, Stainless Steel Bezel, White","description":"\u003cp\u003eThe Attwood 6350W7 LED Micro Light is a compact courtesy light built for tight spaces where a full-size fixture will not fit. Its small footprint makes it a practical choice for rod storage boxes, under a hardtop, along a rail, or in other interior areas that need a low-profile accent light without drawing much power. The fixture is finished with an electropolished stainless steel bezel that adds a bright, clean look to the surrounding surface while standing up to the marine environment.\u003c\/p\u003e\u003cp\u003eInside, the 6350W7 uses fully sealed electronics to keep moisture and spray from reaching the LED, so it continues to perform in wet, harsh onboard conditions. It produces a white light output from an LED source and is designed for vertical mounting, making it well suited to bulkheads, rail sections, and other upright surfaces. Electrically, the light draws just 0.66 watts at 12 volts DC, which is a light load on a 12-volt boat electrical system, allowing several units to be run without a significant draw on the battery. It ships as a single, ready-to-install unit with no assembly required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6350W7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Vertical Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel Material:\u003c\/strong\u003e Electropolished Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Draw:\u003c\/strong\u003e 0.66 Watts at 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1 x 3.75 x 4.87 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1083 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Waterproof, fully sealed electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697463500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 6350W7 LED Micro Light used for?\u003c\/strong\u003e The Attwood 6350W7 is a compact LED courtesy light meant for tight interior spaces on a boat, such as rod storage boxes, under a hardtop, or along a rail, where it adds low-power accent lighting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 6350W7 mount vertically or horizontally?\u003c\/strong\u003e The Attwood 6350W7 is designed for vertical mounting, making it suited to bulkheads, rail sections, and other upright surfaces rather than flush horizontal panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color light does the 6350W7 produce?\u003c\/strong\u003e This fixture produces a white LED light and uses a clear lens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bezel made of?\u003c\/strong\u003e The bezel on the Attwood 6350W7 is electropolished stainless steel, giving it a bright, corrosion-resistant finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much power does the 6350W7 draw?\u003c\/strong\u003e It draws 0.66 watts at 12 volts DC, a light load that allows multiple units to run without significantly taxing a boat's 12-volt electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 6350W7 waterproof?\u003c\/strong\u003e Yes, the 6350W7 has fully sealed electronics that are waterproof, allowing it to be used in areas like rod storage boxes without risk of water damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 6350W7?\u003c\/strong\u003e The Attwood 6350W7 measures 1 x 3.75 x 4.87 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 6350W7 weigh?\u003c\/strong\u003e The Attwood 6350W7 weighs 0.1083 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 6350W7 require assembly?\u003c\/strong\u003e No, the Attwood 6350W7 ships as a complete, ready-to-install unit and does not require assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many lights come in one 6350W7 package?\u003c\/strong\u003e Each Attwood 6350W7 package includes one LED Micro Light unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 6350W7 be mounted under a hardtop or to a rail?\u003c\/strong\u003e Yes, the compact size of the Attwood 6350W7 allows it to be installed under a hardtop, to a rail, or in other tight locations around a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 6350W7 run on?\u003c\/strong\u003e The Attwood 6350W7 operates on a 12 volt DC boat electrical system.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989671981275,"sku":"ATT-6350W7","price":26.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71z-GkJDsiL.jpg?v=1784486947"},{"product_id":"perko-0070dp0clr-double-ended-festoon-bulb-12v-10w-marine-navigation-light-bulb-2-pack","title":"Perko 0070DP0CLR Double-Ended Festoon Bulb, 12V 10W, White, Pack of 2","description":"\u003cp\u003eThe Perko 0070DP0CLR is a double-ended festoon light bulb built for use in Perko navigation light fixtures and other marine lighting that accepts a double-ended festoon-style bulb. It is rated 12 volts \/ 10 watts \/ 0.74 amps and produces white light. The bulb measures 3\/8 inch in diameter and 1-11\/16 inches in length, sized for compact festoon sockets found in boat deck, cabin, and navigation light housings. Each bulb has a double-ended contact design, with a metal cap and filament at each end of the glass tube, which seats into spring-loaded festoon sockets without a base or threaded fitting. This listing is for a pack of 2 bulbs, allowing you to replace both bulbs in a two-bulb fixture or keep a spare on hand. As a genuine Perko part, the 0070DP0CLR is built to match the fit and electrical rating of the festoon bulbs originally specified for Perko fixtures, making it a straightforward replacement when a bulb burns out or a fixture needs relamping.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0070DP0CLR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Double-ended festoon bulb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 10 Watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 0.74 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Diameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Length:\u003c\/strong\u003e 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2 bulbs per pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 0070DP0CLR bulb rated at?\u003c\/strong\u003e The 0070DP0CLR is a 12 volt, 10 watt festoon bulb drawing 0.74 amps, producing white light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bulbs come in this pack?\u003c\/strong\u003e The Perko 0070DP0CLR is sold as a pack of 2 double-ended festoon bulbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the 0070DP0CLR bulb?\u003c\/strong\u003e It measures 3\/8 inch in diameter and 1-11\/16 inches in length, a compact size made for festoon-style sockets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a double-ended or single-ended bulb?\u003c\/strong\u003e The Perko 0070DP0CLR is a double-ended festoon bulb, with contacts at both ends of the glass tube rather than a single base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color light does this bulb produce?\u003c\/strong\u003e The 0070DP0CLR produces white light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bulb have a screw base?\u003c\/strong\u003e No, festoon bulbs like the 0070DP0CLR have no threaded base; the metal caps at each end seat directly into spring-loaded festoon sockets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko 0070DP0CLR a genuine Perko part?\u003c\/strong\u003e Yes, the 0070DP0CLR is a genuine Perko replacement bulb, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fixtures use this bulb?\u003c\/strong\u003e The 0070DP0CLR is a 12 volt double-ended festoon bulb intended for Perko fixtures and other marine lighting built around a festoon-style socket of matching size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 0070DP0CLR bulb weigh?\u003c\/strong\u003e Each pack of Perko 0070DP0CLR bulbs weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many amps does the 0070DP0CLR draw?\u003c\/strong\u003e The bulb draws 0.74 amps at its rated 12 volts \/ 10 watts.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991091982555,"sku":"PKO-0070DP0CLR","price":14.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-0070DP0CLR__66421.1722514365.500.750.jpg?v=1785188539"},{"product_id":"perko-0137dp0blk-louvered-cockpit-utility-light-12v-black-polymer-courtesy-light","title":"Perko LED Louvered Cockpit Utility Light, Black, 12V - 0137DP0BLK","description":"\u003cp\u003eThe Perko 0137DP0BLK is a 12V LED louvered cockpit utility light built to look like a standard vent while functioning as a courtesy light. Its louvered face conceals the LED source so it blends into cockpit, cabin, or helm paneling instead of standing out as an obvious fixture, making it a discreet way to add low-level accent or step lighting anywhere on the boat. The housing combines stainless steel with black polymer and carries a polished finish, giving it a clean, corrosion-resistant look suited to marine environments.\u003c\/p\u003e\u003cp\u003eAs an LED fixture, the 0137DP0BLK draws just 0.25 watts at 0.02 amps, using less than half the energy of a standard incandescent light while still providing usable courtesy illumination. It ships with a 6 inch pig tail wire lead for straightforward hookup into a 12V DC circuit, and mounts with a #8 screw. At 3-1\/8 inches wide and 1-5\/8 inches high, it fits into compact spaces such as cockpit lockers, footwells, and companionway steps where a subtle, low-draw light is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0137DP0BLK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e LED Louvered Cockpit Utility Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel \u0026amp; Black Polymer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 0.25 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 0.02 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 3-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Size:\u003c\/strong\u003e #8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Leads:\u003c\/strong\u003e 6 inch pig tail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226026539\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 0137DP0BLK?\u003c\/strong\u003e It is a 12V LED louvered cockpit utility light from Perko that looks like a standard vent but functions as a courtesy light, designed for discreet accent lighting in cockpits, footwells, and cabins.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 0137DP0BLK use an LED bulb?\u003c\/strong\u003e Yes, the 0137DP0BLK runs on 12V LED power, drawing 0.25 watts and 0.02 amps, which is less than half the energy draw of a standard incandescent light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this light?\u003c\/strong\u003e The Perko 0137DP0BLK measures 3-1\/8 inches wide by 1-5\/8 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 0137DP0BLK made of?\u003c\/strong\u003e It is constructed of stainless steel and black polymer with a polished finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 0137DP0BLK weigh?\u003c\/strong\u003e This Perko utility light weighs 0.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 0137DP0BLK come with wiring included?\u003c\/strong\u003e Yes, it is supplied with a 6 inch pig tail wire lead for connecting into a 12V DC circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat screw size is needed to mount the 0137DP0BLK?\u003c\/strong\u003e The 0137DP0BLK mounts using a #8 screw.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 0137DP0BLK version?\u003c\/strong\u003e The 0137DP0BLK is finished in black, as indicated by its part number and polymer housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can the Perko 0137DP0BLK be installed?\u003c\/strong\u003e Its compact 3-1\/8 inch by 1-5\/8 inch louvered housing suits cockpit lockers, footwells, companionway steps, and other spots where a low-profile, low-draw courtesy light is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the 0137DP0BLK look like a vent?\u003c\/strong\u003e The Perko 0137DP0BLK has a louvered face by design so it visually blends in as a vent while its LED source provides courtesy lighting, rather than appearing as an obvious light fixture.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991097585883,"sku":"PKO-137DPBLK","price":12.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41j7mvwu9pL.jpg?v=1784491460"},{"product_id":"perko-1253dp1wht-4-exterior-surface-mount-dome-light-ivory-perko-kote-12v-with-push-switch","title":"Perko 1253DP1WHT Ivory Exterior Surface Mount Dome Light, 4 Inch Lens","description":"\u003cp\u003eThe Perko 1253DP1WHT is an exterior surface mount dome light designed for cabin, cockpit, and courtesy lighting on boats. It features an ivory Perko-Kote covered zinc alloy base paired with a 4 inch diameter lens, giving an overall fixture diameter of 5 inches and an overall depth of 1-7\/8 inches. The fixture uses a double contact bayonet socket that accepts a 12 volt bulb, supplied with an 11 watt bulb and rated for bulbs up to a maximum of 17 watts. A push switch with a water-resistant boot is built into the fixture for on\/off control at the light itself, and a black vinyl mounting gasket is included to seal the base against the mounting surface during surface installation. The corrosion-resistant zinc alloy construction with Perko-Kote finish is intended to hold up in the marine environment where exposure to moisture and salt air is common. This dome light is well suited for below-deck cabins, companionways, cockpits, and other areas where a compact, surface-mounted overhead light with an integrated switch is needed. Because the socket is a double contact bayonet type, the bulb can be replaced without replacing the entire fixture when it burns out.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1253DP1WHT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Exterior Surface Mount Dome Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Ivory\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Perko-Kote covered zinc alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Diameter:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Diameter:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Depth:\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSocket Type:\u003c\/strong\u003e Double contact bayonet socket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Push switch with water-resistant boot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface mount with black vinyl mounting gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied Bulb Voltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied Bulb Wattage:\u003c\/strong\u003e 11 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Bulb Wattage:\u003c\/strong\u003e 17 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.89 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226007019\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 1253DP1WHT used for?\u003c\/strong\u003e It is an exterior surface mount dome light intended for cabin, cockpit, and courtesy lighting on a boat, mounted directly to an overhead or bulkhead surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is the lens on this dome light?\u003c\/strong\u003e The lens on the Perko 1253DP1WHT measures 4 inches in diameter, with the overall fixture base measuring 5 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the overall depth of the fixture once installed?\u003c\/strong\u003e The overall depth of the Perko 1253DP1WHT dome light is 1-7\/8 inches from the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and wattage bulb does the 1253DP1WHT take?\u003c\/strong\u003e It is supplied with a 12 volt, 11 watt bulb, and the fixture is rated for bulbs up to a maximum of 17 watts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the light include an on\/off switch?\u003c\/strong\u003e Yes, the Perko 1253DP1WHT has a built-in push switch with a water-resistant boot, so the light can be turned on and off directly at the fixture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the dome light made of?\u003c\/strong\u003e The base of the 1253DP1WHT is constructed of zinc alloy finished with an ivory Perko-Kote coating for corrosion resistance in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this dome light?\u003c\/strong\u003e The Perko 1253DP1WHT dome light has an ivory finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a mounting gasket included?\u003c\/strong\u003e Yes, a black vinyl mounting gasket is included with the 1253DP1WHT to seal the base against the mounting surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the bulb be replaced without replacing the whole fixture?\u003c\/strong\u003e Yes, the 1253DP1WHT uses a double contact bayonet socket, so the bulb can be replaced on its own when it burns out rather than replacing the entire dome light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this dome light weigh?\u003c\/strong\u003e The Perko 1253DP1WHT weighs 0.89 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this dome light suitable for exterior mounting?\u003c\/strong\u003e Yes, the 1253DP1WHT is designed as an exterior surface mount dome light for marine use.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991121244379,"sku":"PKO-1253DP1WHT","price":58.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51gNaD5SbZL.jpg?v=1784492046"},{"product_id":"t-h-marine-automatic-led-lid-light-hands-free-white-compartment-light-for-rod-lockers-storage-hatches-mpn-led-39540","title":"T-H Marine Automatic LED Lid Light, White, 6-LED Downward Lighting for Rod Lockers and Storage Compartments, LED-39540","description":"\u003cp\u003eThe T-H Marine Automatic LED Lid Light brings hands-free illumination to rod lockers, storage compartments, and hatch lids. A stainless steel ball switch senses when the lid is raised and automatically turns the light on, then shuts it off again when the lid closes, so there is no separate switch to locate, wire, or remember to flip. Six bright white LEDs are aimed downward into the compartment rather than out toward the user, lighting up the gear inside without throwing glare back into your eyes.\u003c\/p\u003e\u003cp\u003eBecause the switching mechanism is a stainless steel ball rather than a mechanical toggle, it resists rust and corrosion in wet marine environments and has no moving electrical contacts exposed to the elements. The light is built for direct mounting to the underside of a lid, making it a simple add-on for early morning launches, night rigging, or any time you need to see into a dark rod locker or hatch quickly. The housing is plastic, and the unit is packaged as a single automatic LED lid light with no external switch required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LED-39540\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of LEDs:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Direction:\u003c\/strong\u003e Downward into compartment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Stainless steel ball switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Automatic on when lid is raised, off when closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Lid mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572082456\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this light turn on by itself?\u003c\/strong\u003e Yes, the T-H Marine LED-39540 Automatic LED Lid Light uses a stainless steel ball switch that triggers the light on when the lid is raised and shuts it off when the lid is closed, so there is no manual switch to operate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many LEDs does the LED-39540 have?\u003c\/strong\u003e The LED-39540 has six white LEDs that shine downward into the compartment rather than outward, so they light up the storage area without glaring into your eyes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the LEDs?\u003c\/strong\u003e The LED-39540 uses white LEDs, giving clear, neutral light for finding gear inside a rod locker or storage hatch at night.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the switch rust or corrode over time?\u003c\/strong\u003e The LED-39540's ball switch is made of stainless steel, which is designed to resist rust and corrosion in wet marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the LED-39540 made of?\u003c\/strong\u003e The housing of the LED-39540 Automatic LED Lid Light is plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this light weigh?\u003c\/strong\u003e The LED-39540 weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this light meant to be installed?\u003c\/strong\u003e The LED-39540 is a lid-mounted light designed for rod lockers, storage compartments, and hatch lids where automatic illumination is needed when the lid opens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to wire a switch to use this light?\u003c\/strong\u003e No, the LED-39540 does not require a separate switch to be wired in; its stainless steel ball switch handles the on\/off function automatically based on lid position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on this light?\u003c\/strong\u003e The LED-39540 Automatic LED Lid Light carries a 1 year manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the LED-39540?\u003c\/strong\u003e The LED-39540 is supplied as a single Automatic LED Lid Light unit with its integrated ball switch and six white LEDs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this light be used in wet or splash-prone areas of a boat?\u003c\/strong\u003e Yes, the LED-39540's stainless steel ball switch is built to resist rust and corrosion, making it suited for the wet conditions found around rod lockers and storage hatches on a boat.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991265587419,"sku":"T-H-LED-39540-DP","price":31.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/automatic-led-lid-light-493860651036.jpg?v=1784498722"},{"product_id":"t-h-marine-led-companion-way-light-black-bezel-2-white-leds-waterproof-surface-mount-accent-light-led-51816","title":"T-H Marine LED Companion Way Light LED-51816, Black Plastic Bezel, White LED, Surface Mount Boat Step Light","description":"\u003cp\u003eThe T-H Marine LED-51816 is a compact companion way LED light built to illuminate pathways, steps, and utility boxes aboard a boat. It pairs a black plastic bezel with 2 White LEDs behind an opaque polycarbonate lens, producing a warm, non-glare glow rather than a harsh spot of light, which makes it well suited to lighting steps and walkways without shining directly into the eyes.\u003c\/p\u003e\u003cp\u003eInside, the circuit board is fully sealed in epoxy, protecting it from water intrusion, corrosion, and vibration so it holds up in a marine environment. The LEDs draw only 20 mA at 12 volts (2 watts), giving a long run time on battery power, and are rated for a service life of up to 100,000 hours, so the fixture is not something you expect to replace often. Light output is rated at 15 lumens, enough for accent and safety lighting in companionways, steps, and utility box areas.\u003c\/p\u003e\u003cp\u003eInstallation is a straightforward surface mount, and mounting fasteners are included in the box. The fixture measures 2.6 inches long by 1.3 inches wide, keeping it low-profile for tight mounting locations. This black plastic bezel, white LED version is one of several color combinations in the companion way light line; white and chrome-plated bezels with different LED colors are offered as separate part numbers, so the black bezel, white LED LED-51816 should be selected specifically when that look and light color is wanted.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LED-51816\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Name:\u003c\/strong\u003e Companion Way LED Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of LEDs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Output:\u003c\/strong\u003e 15 Lumens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 20 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 2 Watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Lifespan:\u003c\/strong\u003e Up to 100,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.6 inches long x 1.3 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08125 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface mount, fasteners included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Epoxy-sealed circuit board, waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal surface-mount installation; suitable for companionways, steps, and utility boxes on boats and similar vehicles.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers apply to this product.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color LEDs does the LED-51816 companion way light have?\u003c\/strong\u003e The LED-51816 uses 2 White LEDs behind an opaque polycarbonate lens, producing a warm glow rather than a bright pinpoint of light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bezel made of on this light?\u003c\/strong\u003e LED-51816 has a black plastic bezel; white plastic and chrome-plated bezel versions of this companion way light are offered under different part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow bright is this fixture?\u003c\/strong\u003e 15 lumens, which is enough for accent lighting on steps, companionways, and utility boxes without being harsh in a dark cabin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the LED-51816 light?\u003c\/strong\u003e It measures 2.6 inches long by 1.3 inches wide, a low-profile size intended for surface mounting in tight spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much power does the LED-51816 draw?\u003c\/strong\u003e Only 20 mA at 12 volts (2 watts), which keeps battery drain low for boats running the light for extended periods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the T-H Marine LED-51816 waterproof?\u003c\/strong\u003e Yes, the circuit board is fully sealed in epoxy, which protects the LED-51816 from water, corrosion, and vibration in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the LED-51816 companion way light installed?\u003c\/strong\u003e It is a surface-mount fixture, and mounting fasteners are included, so no additional hardware is needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do the LEDs in this fixture last?\u003c\/strong\u003e Up to 100,000 hours, meaning the LED-51816 is designed to run for years without needing an LED replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other color options exist for this companion way light?\u003c\/strong\u003e Besides the black bezel with white LEDs (LED-51816), the line includes a white bezel with red LEDs, a white bezel with white LEDs, and chrome bezels with blue or white LEDs, each under its own part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with LED-51816?\u003c\/strong\u003e The package includes the companion way LED light fixture with its black plastic bezel and the mounting fasteners needed to surface-mount it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LED-51816 come with a warranty?\u003c\/strong\u003e Yes, it carries a 1 year manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the LED-51816 light weigh?\u003c\/strong\u003e It weighs 0.08125 pounds.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991265816795,"sku":"T-H-LED-51816-DP","price":17.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/black-plastic-bezel-2-white-leds-led-companion-way-lights-30168268177451.jpg?v=1784498744"},{"product_id":"t-h-marine-led-51819-companion-way-light-white-bezel-2-white-leds-surface-mount-marine-courtesy-light","title":"T-H Marine LED-51819 Companion Way LED Light - White Plastic Bezel, 2 White LEDs","description":"\u003cp\u003eThe T-H Marine LED-51819 is a compact LED companion way light designed to economically illuminate pathways, steps, and utility boxes aboard a boat. It doubles as both a functional companion way light and an accent light, giving builders and owners an affordable way to add low-profile lighting anywhere it is needed. This version features a white plastic bezel paired with 2 white LEDs and an opaque PC (polycarbonate) lens that produces a warm, diffused glow rather than a harsh point of light.\u003c\/p\u003e\u003cp\u003eBuilt for the marine environment, the circuit board is completely sealed in epoxy to resist water intrusion, corrosion, and vibration, making it suitable for long-term use in wet, high-vibration areas of a boat. The light draws just 20 mA of current, allowing it to run efficiently off a boat's electrical system, and is rated for a super long life span of up to 100,000 hours with a bright 15 lumen output. Installation is straightforward with an easy surface mount design, and mounting fasteners are included in the package.\u003c\/p\u003e\u003cp\u003eThe LED-51819 measures 2.6 inches long by 1.3 inches wide, making it a small, unobtrusive addition to steps, companionways, deck boxes, or utility compartments. The bezel is also available in black and chrome plated finishes as separate part numbers, so buyers should confirm they are ordering the white plastic bezel version if that is the finish they need.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LED-51819\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Companion Way LED Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Color:\u003c\/strong\u003e White (2 LEDs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Output:\u003c\/strong\u003e 15 Lumens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 20 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Life Span:\u003c\/strong\u003e Up to 100,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens:\u003c\/strong\u003e Opaque PC (polycarbonate)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Board Protection:\u003c\/strong\u003e Fully sealed in epoxy for water, corrosion, and vibration resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Easy surface mount, fasteners included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.6 inches long x 1.3 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the LED-51819 companion way light used for?\u003c\/strong\u003e The T-H Marine LED-51819 is designed to light pathways, steps, and utility boxes economically, and it can also serve as an accent light in other areas of the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the bezel on the LED-51819?\u003c\/strong\u003e The LED-51819 has a white plastic bezel. The same light is also available with a black plastic bezel or a chrome plated bezel under different part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many LEDs does the LED-51819 have and what color are they?\u003c\/strong\u003e This light uses 2 white LEDs behind an opaque PC lens that diffuses the light into a warm glow rather than a sharp point source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow bright is the T-H Marine LED-51819?\u003c\/strong\u003e It produces a bright 15 lumen output, which is sufficient for illuminating steps, companionways, and utility box interiors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much power does the LED-51819 draw?\u003c\/strong\u003e Current draw is low at just 20 mA, making the LED-51819 efficient to run continuously off a boat's 12-volt electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the expected lifespan of the LED-51819 light?\u003c\/strong\u003e T-H Marine rates the LED-51819 for a super long life span of up to 100,000 hours of use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-51819 waterproof?\u003c\/strong\u003e The circuit board on the LED-51819 is completely sealed in epoxy, which resists water, corrosion, and vibration for reliable operation in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the LED-51819 companion way light?\u003c\/strong\u003e The LED-51819 measures 2.6 inches long by 1.3 inches wide, keeping it small and unobtrusive when mounted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the LED-51819 installed?\u003c\/strong\u003e Installation uses an easy surface mount design, and mounting fasteners are included with the LED-51819 so no separate hardware purchase is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the LED-51819 weigh?\u003c\/strong\u003e The T-H Marine LED-51819 weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the LED-51819 be used as an accent light instead of a step light?\u003c\/strong\u003e Yes, T-H Marine markets the LED-51819 as both an LED companion way light and an accent light, so it can be used wherever low-level accent lighting is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other bezel and LED color options exist besides the LED-51819?\u003c\/strong\u003e T-H Marine offers this same style light with a black bezel and white LEDs, a white bezel with red LEDs, a chrome bezel with blue LEDs, and a chrome bezel with white LEDs, each under its own part number; the LED-51819 specifically has a white bezel with 2 white LEDs.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991266013403,"sku":"T-H-LED-51819-DP","price":17.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/black-plastic-bezel-2-white-leds-led-companion-way-lights-30168268177451_79797da6-f369-476a-a487-a82a06c27f72.jpg?v=1784498764"},{"product_id":"t-h-marine-led-51832-stainless-steel-4-inch-blue-led-puck-light-6-leds-12v-dimmable-marine-and-rv-cabin-light","title":"T-H Marine Stainless LED Puck Light, 4 Inch, Blue LED, Dimmable, LED-51832","description":"\u003cp\u003eThe T-H Marine LED-51832 is a 4 inch stainless steel LED puck light built for boats and RVs, providing clean, even illumination for ceilings, courtesy areas, and task lighting. The housing is highly polished 304 stainless steel for a rich, finished look that resists corrosion in a marine environment. A clear polycarbonate engineered lens delivers uniform, wide angle light output, making this light well suited for under cabinets, cockpits, headliners, and interior compartments where consistent brightness is needed.\u003c\/p\u003e\u003cp\u003eThis puck light uses 6 blue LEDs and is dimmable, giving you control over ambient brightness for mood or courtesy lighting. The circuit board is fully sealed in epoxy, protecting it from water, corrosion, and vibration, which are common failure points for lighting in a marine setting. The LEDs are rated for a super long life span of up to 50,000 hours, reducing the need for replacement over the life of the boat or RV.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the light surface mounts to any flat surface using hidden fasteners for a clean finished appearance with no visible screws. The 4 inch total outside diameter unit has mounting screw holes spaced 2 3\/16 inches apart (measured center to center), and a 3\/16 inch hole is needed to run the wiring through the mounting surface.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LED-51832\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e LED Puck Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Color:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Count:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel Diameter:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Spacing:\u003c\/strong\u003e 2 3\/16 inches, center to center\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Access Hole Diameter:\u003c\/strong\u003e 3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Lifespan:\u003c\/strong\u003e Up to 50,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimmable:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners:\u003c\/strong\u003e Hidden\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing:\u003c\/strong\u003e Epoxy-sealed circuit board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the T-H Marine LED-51832 puck light?\u003c\/strong\u003e The LED-51832 has a 4 inch total outside diameter bezel, with mounting screw holes spaced 2 3\/16 inches apart center to center.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color LEDs does the LED-51832 use?\u003c\/strong\u003e This puck light is equipped with 6 blue LEDs, giving it a distinct blue courtesy light effect rather than white task lighting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-51832 puck light dimmable?\u003c\/strong\u003e Yes, the T-H Marine LED-51832 is dimmable, allowing the brightness to be adjusted for ambient or courtesy lighting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing made of?\u003c\/strong\u003e The LED-51832 has a highly polished 304 stainless steel housing paired with a clear polycarbonate lens for a rich, corrosion resistant finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the LED-51832 mounted?\u003c\/strong\u003e It is a surface mount light that attaches to any flat surface using hidden fasteners, so no visible screws show once installed on the LED-51832.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big of a wiring hole do I need to drill?\u003c\/strong\u003e A 3\/16 inch hole is needed to run the wiring through the mounting surface for the LED-51832 puck light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do the LEDs in the LED-51832 last?\u003c\/strong\u003e The LEDs used in the LED-51832 are rated for a super long life span of up to 50,000 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-51832 waterproof for marine use?\u003c\/strong\u003e The circuit board in the LED-51832 is completely sealed in epoxy, which protects it from water, corrosion, and vibration in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the LED-51832 typically used for?\u003c\/strong\u003e This puck light is intended for use as a ceiling light, courtesy light, or task light in boats and RVs, and works well under cabinets, in cockpits, headliners, and compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the LED-51832 run on?\u003c\/strong\u003e The T-H Marine LED-51832 puck light operates on 12 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the LED-51832 weigh?\u003c\/strong\u003e The LED-51832 puck light weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the mounting fasteners visible once the LED-51832 is installed?\u003c\/strong\u003e No, the LED-51832 uses hidden fasteners so the fastener hardware is concealed for a clean surface mount finish.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991266078939,"sku":"T-H-LED-51832-DP","price":78.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/stainless-led-puck-lights-28009232498731.jpg?v=1784498782"},{"product_id":"t-h-marine-led-51848-recessed-3-led-puck-light-red-9-leds-12v-low-profile-courtesy-light","title":"T-H Marine LED-51848 Recessed LED Puck Light, Red, 9 LED, 3 Inch, 12V Dimmable Boat and RV Courtesy Light","description":"\u003cp\u003eThe T-H Marine LED-51848 is a 3 inch recessed LED puck light designed for cabin and compartment lighting aboard boats and RVs. It uses 9 bright red LEDs behind a clear polycarbonate lens to deliver uniform, comfortable illumination without harsh glare, making it well suited to night operation where preserving night vision matters, such as helm areas, companionways, and cockpit steps. The recessed mounting style sets the fixture flush into a 2 inch cutout for a smooth, low-profile finish with hidden fasteners, so there is no bulky housing or exposed hardware protruding from cabinetry or panels.\u003c\/p\u003e\u003cp\u003eThe circuit board is completely sealed in epoxy to resist water intrusion, corrosion, and vibration, making the light suitable for the damp, high-vibration environments found under cabinets, in rod lockers, and inside utility bins. It draws only 50mA at 12VDC, keeping power consumption low for longer battery life on house or accessory circuits, and the light is dimmable so output can be tuned for courtesy lighting or brighter task use. Each light ships with black, white, and chrome bezels so the finish can be matched to the surrounding trim, and the housing combines polycarbonate and ABS plastic with a chromed bezel for a durable, corrosion-resistant build. This is the red-LED version; the same fixture is also available with white or blue LEDs as separate part numbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LED-51848\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Count:\u003c\/strong\u003e 9 LEDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLumens:\u003c\/strong\u003e 18 LM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 50 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Polycarbonate + ABS Plastic + Chromed Bezel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Recessed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimmable:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel Colors Included:\u003c\/strong\u003e Black, White, Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1 x 3.6 x 3.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal recessed installation for boats and RVs; requires a 2 inch mounting hole.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole do I need to install the LED-51848?\u003c\/strong\u003e The T-H Marine LED-51848 requires a 2 inch diameter mounting hole for its recessed installation; the light itself is 3 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-51848 dimmable?\u003c\/strong\u003e Yes, the LED-51848 recessed puck light is dimmable, letting you adjust output between subtle courtesy lighting and brighter task lighting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the LEDs on part number LED-51848?\u003c\/strong\u003e LED-51848 uses 9 red LEDs, producing 18 lumens of illumination through a clear polycarbonate lens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LED-51848 come with different bezel color options?\u003c\/strong\u003e Yes, each LED-51848 light ships with black, white, and chrome bezels included in the box, so you can match the surrounding trim without buying extra parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much power does the LED-51848 draw?\u003c\/strong\u003e The LED-51848 draws 50mA at 12VDC, which keeps power use low for longer battery life on a boat or RV's accessory circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-51848 waterproof and suitable for marine use?\u003c\/strong\u003e The circuit board in the LED-51848 is completely sealed in epoxy to resist water, corrosion, and vibration, making it suitable for marine and RV compartment installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the LED-51848 typically installed?\u003c\/strong\u003e This recessed 3 inch puck light is commonly installed under cabinets, in rod lockers, and inside utility bins for cabin and compartment lighting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the LED-51848 housing made of?\u003c\/strong\u003e The LED-51848 housing is made of polycarbonate and ABS plastic with a chromed bezel, and the lens is polycarbonate for uniform light distribution.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre white or blue versions of this puck light available?\u003c\/strong\u003e Yes, the same recessed 3 inch puck light is available with white LEDs and with blue LEDs, each sold under its own separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are used to mount the LED-51848?\u003c\/strong\u003e The LED-51848 uses hidden fasteners as part of its recessed mounting design, keeping the installed look clean with no visible hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many LEDs are in each LED-51848 fixture?\u003c\/strong\u003e Each LED-51848 fixture contains 9 LEDs arranged behind a clear polycarbonate lens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the LED-51848?\u003c\/strong\u003e The LED-51848 includes the recessed LED puck light itself along with black, white, and chrome bezels.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991266144475,"sku":"T-H-LED-51848-DP","price":42.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/recessed-led-puck-lights-33072198975531_48bf1b15-55d3-47d7-8106-c860666cddd3.jpg?v=1784498784"},{"product_id":"t-h-marine-led-51849-recessed-3-led-puck-light-blue-9-leds-12v-dimmable-courtesy-light","title":"T-H Marine LED-51849 Recessed LED Puck Light, Blue, 3 Inch, 9 LED","description":"\u003cp\u003eThe T-H Marine LED-51849 is a recessed-mount LED puck light with a blue clear-PC lens, built for cabin and compartment lighting in boats and RVs. The 3 inch diameter fixture houses 9 bright blue LEDs and drops into a 2 inch mounting hole for a clean, low-profile finish with hidden fasteners, so there is no bulky housing or exposed hardware protruding from the surface. It is well suited to under-cabinet lighting, rod lockers, utility bins, and other interior compartments where flush-mounted courtesy lighting is needed.\u003c\/p\u003e\u003cp\u003eThe circuit board is fully sealed in epoxy to resist water, corrosion, and vibration, and the light draws only 50mA at 12VDC for minimal battery impact during extended use. The light is dimmable, allowing output to be tuned for either subtle courtesy lighting or brighter task lighting. Each unit ships with three interchangeable bezel colors, black, white, and chrome, so the finish can be matched to the surrounding trim without buying a separate light. The housing combines polycarbonate and ABS plastic with a chromed bezel for a lustrous look that holds up in a marine environment.\u003c\/p\u003e\u003cp\u003eThis blue version is part of a color series that also includes white and red LED options, all sharing the same 3 inch housing, 2 inch mounting hole, and 12VDC low-draw electronics.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LED-51849\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Count:\u003c\/strong\u003e 9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLumens:\u003c\/strong\u003e 18 LM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmp Draw:\u003c\/strong\u003e 50mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Polycarbonate + ABS Plastic + Chromed Bezel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate, clear lens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter Required:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Recessed, hidden fasteners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel Colors Included:\u003c\/strong\u003e Black, White, Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimmable:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCE Certification:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1 x 3.6 x 3.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.19 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal recessed installation for boat and RV cabins, compartments, rod lockers, and utility bins wherever a 2 inch mounting hole can be cut; not tied to a specific make or model of vessel.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color light does the LED-51849 produce?\u003c\/strong\u003e The T-H Marine LED-51849 produces blue illumination from its 9 built-in LEDs, rated at 18 lumens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big of a hole do I need to cut to install this light?\u003c\/strong\u003e A 2 inch diameter mounting hole is required to recess-mount the LED-51849, which itself measures 3 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-51849 dimmable?\u003c\/strong\u003e Yes, the LED-51849 puck light is dimmable, so output can be adjusted for either soft courtesy lighting or brighter task lighting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bezel colors come with this light?\u003c\/strong\u003e Three bezel colors, black, white, and chrome, are included in the box with every LED-51849, so the finish can be matched to the installation without an extra purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing made of?\u003c\/strong\u003e The LED-51849 housing is built from polycarbonate and ABS plastic with a chromed bezel, paired with a clear polycarbonate lens for uniform light distribution.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much power does this light draw?\u003c\/strong\u003e At 12VDC, the LED-51849 draws only 50mA, which keeps battery drain low for extended cabin or compartment lighting use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this light waterproof or corrosion resistant?\u003c\/strong\u003e The circuit board in the LED-51849 is fully sealed in epoxy to resist water intrusion, corrosion, and vibration, making it suitable for marine compartment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the LED-51849?\u003c\/strong\u003e Each LED-51849 ships as a complete recessed puck light with hidden mounting fasteners and three interchangeable bezels (black, white, chrome).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this type of light typically installed?\u003c\/strong\u003e The LED-51849 is designed for recessed cabin and compartment lighting, such as under cabinets, rod lockers, and utility bins on boats and RVs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the LED-51849 differ from the RGBW puck light?\u003c\/strong\u003e Unlike the RGBW version (LED-32658), which needs an RGB remote control to change colors, the LED-51849 is a fixed blue light that runs directly off 12VDC with no additional controller required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LED-51849 have CE certification?\u003c\/strong\u003e No, the LED-51849 recessed LED puck light does not carry CE certification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the LED-51849 weigh?\u003c\/strong\u003e The T-H Marine LED-51849 weighs 0.19 pounds.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991266111707,"sku":"T-H-LED-51849-DP","price":42.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/recessed-led-puck-lights-33072198975531.jpg?v=1784498783"},{"product_id":"t-h-marine-recessed-3-led-puck-light-9-white-leds-dimmable-12v-with-3-bezels-black-white-chrome-led-51847","title":"T-H Marine LED-51847 Recessed LED Puck Light, White, 3 Inch Diameter, 9 LEDs","description":"\u003cp\u003eThe T-H Marine LED-51847 is a white recessed LED puck light built for cabin and compartment lighting on boats and RVs. Its low-profile recessed design sits flush with the mounting surface for a clean look, needing only a 2 inch hole to install. Each light is equipped with 9 bright LEDs producing 55 lumens of white illumination, paired with a clear polycarbonate lens engineered for uniform, comfortable light distribution without glare. The light is dimmable, so brightness can be adjusted for task lighting or a softer ambient glow.\u003c\/p\u003e\u003cp\u003eEvery LED-51847 ships with three interchangeable bezels in black, white, and chrome, so the finish can be matched to the surrounding decor without buying a different light. Hidden fasteners keep the mounted look tidy. The circuit board is fully sealed in epoxy to resist water, corrosion, and vibration, making it suited to the harsh conditions found in marine and RV environments. With a low amp draw at or below 50mA, it is efficient on 12VDC systems and helps conserve battery life during extended use.\u003c\/p\u003e\u003cp\u003eThis puck light is well suited to under-cabinet lighting, rod lockers, utility bins, headliners, and other cabin or compartment applications where a compact, recessed fixture is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LED-51847\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Recessed LED Puck Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Count:\u003c\/strong\u003e 9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLumens:\u003c\/strong\u003e 55 lumens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 50mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 5 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Polycarbonate + ABS Plastic + Chromed Bezel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel Colors Included:\u003c\/strong\u003e Black, White, and Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Recessed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1 x 3.6 x 3.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimmable:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCE Certified:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the diameter of the T-H Marine LED-51847 puck light?\u003c\/strong\u003e The LED-51847 measures 3 inches in diameter and requires only a 2 inch hole for its recessed mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-51847 dimmable?\u003c\/strong\u003e Yes, the LED-51847 recessed puck light is dimmable, allowing brightness to be adjusted from a soft ambient glow to brighter task lighting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many LEDs are in the LED-51847 and how bright is it?\u003c\/strong\u003e This light uses 9 LEDs producing 55 lumens of white illumination through a clear polycarbonate lens for uniform light distribution.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bezel colors come with the T-H Marine LED-51847?\u003c\/strong\u003e Each LED-51847 ships with three interchangeable bezels, in black, white, and chrome, so the finish can be matched to the surrounding decor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and amp draw does the LED-51847 use?\u003c\/strong\u003e The LED-51847 runs on 12VDC and draws 50mA, keeping power use low for extended battery life on boats and RVs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-51847 waterproof?\u003c\/strong\u003e The LED-51847's circuit board is fully sealed in epoxy to resist water, corrosion, and vibration, making it suitable for marine and RV environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the LED-51847 housing made of?\u003c\/strong\u003e The LED-51847 puck light housing is built from polycarbonate and ABS plastic with a chromed bezel option included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can the LED-51847 be installed?\u003c\/strong\u003e This recessed puck light is designed for cabin and compartment lighting such as under cabinets, rod lockers, utility bins, and headliners in boats and RVs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-51847 a surface-mount or recessed light?\u003c\/strong\u003e The LED-51847 is a recessed-mount light that sits flush with the mounting surface for a clean, low-profile appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the LED-51847 weigh?\u003c\/strong\u003e The T-H Marine LED-51847 recessed LED puck light weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LED-51847 have visible mounting screws?\u003c\/strong\u003e No, the LED-51847 uses hidden fasteners to keep the installed look clean and finished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the LED-51847?\u003c\/strong\u003e The LED-51847 recessed LED puck light is backed by a 1 year manufacturer warranty.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991266177243,"sku":"T-H-LED-51847-DP","price":41.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/recessed-led-puck-lights-33072198975531_acc16e72-ea57-4eca-8974-ea54eeda68a0.jpg?v=1784498784"},{"product_id":"t-h-marine-flush-head-led-livewell-light-white-100-waterproof-1-1-4-flush-mount-for-livewells-baitwells-lockers-utility-areas-mpn-led-51874","title":"T-H Marine LED-51874 White LED Livewell Light - Waterproof Flush Mount Utility Light, 1-1\/4 Inch","description":"\u003cp\u003eThe T-H Marine LED-51874 is a totally waterproof, super-bright white LED light built for illuminating livewells, lockers, and other high-moisture compartments aboard your boat. It uses a single super-bright LED rated at 6 lumens output paired with a diffuser lens, giving even, wide-angle coverage inside tight, enclosed spaces. Because it is fully waterproof, the LED-51874 can be mounted above or below the water line, making it equally suited to livewell illumination as it is to accent or courtesy lighting on transoms, steps, or storage compartments.\u003c\/p\u003e\u003cp\u003eInstallation is simple: the light mounts through a wall with just a 3\/4 inch hole and connects via a 12V pigtail connection, so there is no complicated wiring. Its compact 1-1\/4 inch diameter lets it fit anywhere light is needed without taking up valuable space. The low 15mA power draw keeps amperage use to a minimum so it will not run down your battery, and the LED is rated for an extraordinary lifespan of up to 100,000 hours, meaning years of reliable service without the cost and hassle of replacing bulbs. The impact-resistant lens is built to stand up to the rigors of the marine environment while maintaining a wide viewing angle for maximum visibility.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LED-51874\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e 1 super-bright LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Output:\u003c\/strong\u003e 6 lumens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Draw:\u003c\/strong\u003e 15mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Life:\u003c\/strong\u003e Up to 100,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Required:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Type:\u003c\/strong\u003e Diffuser lens, impact resistant, wide viewing angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Acrylic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type:\u003c\/strong\u003e Pigtail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Through-wall \/ flush mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Rating:\u003c\/strong\u003e Totally waterproof, rated for use above or below the water line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572076455\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan the T-H Marine LED-51874 be mounted below the water line?\u003c\/strong\u003e Yes, the LED-51874 is totally waterproof and is designed to be mounted either above or below the water line, making it suitable for direct installation inside a livewell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole do I need to drill to install this light?\u003c\/strong\u003e A 3\/4 inch hole is required to flush-mount the LED-51874 through the wall of the livewell, locker, or compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow bright is the LED-51874 livewell light?\u003c\/strong\u003e It uses a single super-bright LED rated at 6 lumens output, paired with a diffuser lens for even, wide-angle coverage in enclosed spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this light?\u003c\/strong\u003e The LED-51874 produces white light; a blue-LED version, the LED-51875, is also available as a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the light wired?\u003c\/strong\u003e The LED-51874 uses a simple 12V pigtail connection, so it can be wired directly without additional connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this light drain my battery?\u003c\/strong\u003e No, the LED-51874 has a low power draw of just 15mA, so it uses minimal amperage and will not significantly impact battery life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long will the LED last?\u003c\/strong\u003e The LED-51874 is rated for a lifespan of up to 100,000 hours of use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the diameter of this light?\u003c\/strong\u003e The LED-51874 has a compact 1-1\/4 inch diameter, allowing it to fit in tight spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this light for anything besides a livewell?\u003c\/strong\u003e Yes, in addition to livewell illumination the LED-51874 works well as accent or courtesy lighting for lockers and other compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of, and how durable is it?\u003c\/strong\u003e The LED-51874 features an acrylic lens that is impact resistant with a wide viewing angle for durability in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the light come fully assembled and ready to install?\u003c\/strong\u003e Yes, the LED-51874 is a complete light fixture with the LED, diffuser lens, and pigtail wiring included, requiring no additional assembly.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991266668763,"sku":"T-H-LED-51874-DP","price":16.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/flush-head-led-livewell-lights-493887356956.jpg?v=1784498817"},{"product_id":"t-h-marine-led-51950-flex-strip-rope-light-24-in-cool-white-led-12v-waterproof-boat-accent-lighting","title":"T-H Marine LED-51950 24 Inch White LED Flex Strip Light for Boats","description":"\u003cp\u003eThe T-H Marine LED-51950 is a 24 inch white LED flex strip light built for accent and utility lighting anywhere on a boat, including under gunwales, along the deck, in storage compartments, and around helm areas. The flexible strip is backed with quality 3M mounting tape, so it can be applied directly to a clean surface without drilling, and it can be cut to length to fit the exact space being lit. Wiring is kept simple: a single hot and ground wire lead comes off one end of the strip, and the light runs on a 12 volt system typical of marine electrical setups.\u003c\/p\u003e\u003cp\u003eBuilt for the marine environment, the LED-51950 is water and moisture resistant, making it suitable for both interior and semi-exposed boat locations. Its low amp draw means it can run for extended periods without placing a heavy load on the battery, and the LED design avoids the heat buildup associated with older lighting styles. The strip emits white light, giving a clean, functional look for task lighting or general accent use. This 24 inch White strip is one length in a broader lineup of flex strip lights; other lengths and colors are offered as separate, distinct part numbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LED-51950\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Flex Strip Light - 24 Inch - White LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 6 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Hot and ground wire leads from one end of the strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 3M backing tape; strip can be cut to length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water and moisture resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572077056\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal accessory light; suitable for mounting on any boat under gunwales, decks, or other 12 volt-equipped areas.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the T-H Marine LED-51950 strip light?\u003c\/strong\u003e The LED-51950 is a 24 inch LED flex strip light, one of several lengths T-H Marine offers in this strip light lineup (other lengths are separate part numbers).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the LED-51950 be cut shorter to fit a smaller space?\u003c\/strong\u003e Yes, the LED-51950 flex strip can be cut to length, allowing it to be trimmed to fit tighter mounting areas such as under a gunwale or inside a compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this LED strip run on?\u003c\/strong\u003e The LED-51950 operates on a 12 volt system, matching standard boat electrical setups, and draws 6 watts of power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-51950 waterproof?\u003c\/strong\u003e The LED-51950 is water and moisture resistant, making it suitable for interior boat locations and areas exposed to spray or damp conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the LED-51950 strip light mounted?\u003c\/strong\u003e It mounts using quality 3M backing tape on the underside of the strip, so it can be applied to a clean, dry surface without additional hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the LED-51950 wired into a boat's electrical system?\u003c\/strong\u003e A hot wire and a ground wire lead come off one end of the LED-51950 strip, which connect into the boat's 12 volt wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the LED-51950 emit?\u003c\/strong\u003e White is the LED color for part number LED-51950; the same strip light is also available in Blue, Red, Green, and a White\/Blue combo under different part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can the LED-51950 be installed on a boat?\u003c\/strong\u003e This flex strip light is suited for lighting a deck, under gunwale areas, storage compartments, and similar spaces where 12 volt accent or task lighting is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LED-51950 run down the battery quickly?\u003c\/strong\u003e No, the LED-51950 has a low amp draw designed so it won't run batteries down during extended use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the LED-51950?\u003c\/strong\u003e The LED-51950 ships as a single 24 inch white LED flex strip with 3M backing tape pre-applied and a hot\/ground wire lead attached to one end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-51950 a genuine T-H Marine product?\u003c\/strong\u003e Yes, LED-51950 is the manufacturer part number for this genuine T-H Marine 24 inch white LED flex strip light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the LED-51950 differ from the 48 inch or 72 inch strip lights?\u003c\/strong\u003e The LED-51950 is the 24 inch white version of T-H Marine's flex strip light; the 48 inch and 72 inch white strips are separate part numbers in the same lineup.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991266701531,"sku":"T-H-LED-51950-DP","price":33.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/LED-51946_04.jpg?v=1784498821"},{"product_id":"t-h-marine-mini-led-dual-mount-courtesy-light-white-3-led-12v-mount-up-down-or-out-mpn-led-51880","title":"T-H Marine Mini LED Dual Mount Courtesy Light, White, 3-LED 12V, LED-51880","description":"\u003cp\u003eThe T-H Marine Mini LED Dual Mount Courtesy Light is an all-purpose utility light built for clean, low-profile installs anywhere soft interior lighting is needed. Three bright LEDs produce a gentle 15-lumen glow, making this fixture well suited to steps, companionways, under cabinets, compartments, and other tight interior spots where you want guidance lighting without glare. The dual mount design lets the light face down, up, or out, so it can be aimed exactly where it is needed whether mounted vertically or horizontally. Construction is low heat, noncorrosive, shock-resistant, and water-resistant, holding up to real-world marine vibration and moisture exposure. Power draw is an ultra-low 15mA, helping protect battery capacity during extended runtime on the water. The compact fixture measures 2-1\/8 inches L x 5\/8 inches H x 1\/2 inches W, making it easy to fit into tight interior layouts, and stainless steel fasteners are included for a secure, corrosion-resistant install. This white LED version is part of a mini dual-mount light family that also includes a 3 Blue LED option for buyers who want a different accent color.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LED-51880\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Count:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Output:\u003c\/strong\u003e 15 Lumens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 15 Milliamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Dual Mount (Face Down, Up, or Out)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixture Dimensions:\u003c\/strong\u003e 2-1\/8 inches L x 5\/8 inches H x 1\/2 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Acrylic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners:\u003c\/strong\u003e Stainless Steel, Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Noncorrosive, Shock-Resistant, Water-Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Light, Stainless Steel Fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the LED-51880 courtesy light used for?\u003c\/strong\u003e The T-H Marine LED-51880 is a mini utility light meant for accent and courtesy lighting anywhere soft light is needed, such as steps, companionways, under cabinets, and compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the LED-51880 mounted?\u003c\/strong\u003e It uses a dual mount design and can be mounted to face down, up, or out, and can be positioned vertically or horizontally for low-profile placement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow bright is this light?\u003c\/strong\u003e The LED-51880 uses three LEDs producing a 15-lumen output, giving a soft ambient glow rather than a harsh, high-intensity beam.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this light drain my battery?\u003c\/strong\u003e No. The LED-51880 draws only 15 milliamps at 12 volts, which is a very low current draw designed to preserve battery capacity during extended use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color LED does the LED-51880 use?\u003c\/strong\u003e This version of the light uses 3 White LEDs. T-H Marine also offers a 3 Blue LED version, LED-51898, for buyers who want a different accent color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the LED-51880 fixture?\u003c\/strong\u003e The fixture measures 2-1\/8 inches L x 5\/8 inches H x 1\/2 inches W, making it small enough for tight interior mounting locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-51880 waterproof?\u003c\/strong\u003e The LED-51880 is water-resistant, along with being noncorrosive and shock-resistant, making it suitable for marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of on this light?\u003c\/strong\u003e The LED-51880 fixture uses an acrylic lens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is included with the LED-51880?\u003c\/strong\u003e Stainless steel fasteners are included with the LED-51880 for a secure, corrosion-resistant installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the LED-51880 weigh?\u003c\/strong\u003e The T-H Marine LED-51880 weighs 0.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LED-51880 run hot?\u003c\/strong\u003e No, the LED-51880 is designed for low heat operation, which is part of why it is safe to mount in tight, enclosed compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the LED-51880 require?\u003c\/strong\u003e The LED-51880 is a 12 volt fixture.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991266734299,"sku":"T-H-LED-51880-DP","price":15.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/mini-led-light-dual-mount-3-white-leds-mini-led-dual-mount-courtesy-light-493715587100.jpg?v=1784498826"},{"product_id":"t-h-marine-led-flex-strip-light-24-red-mpn-led-51952-12v-water-resistant-boat-deck-gunwale-rope-light","title":"T-H Marine LED Flex Strip Light, 24 Inch Red LED Rope Light for Boat Decks and Gunwales","description":"\u003cp\u003eThe T-H Marine LED Flex Strip Light (LED-51952) is a 24 inch red LED rope light built to add courtesy lighting to a boat deck or under the gunwale. The flexible strip runs on quality 3M backing tape, so it mounts to almost any clean surface without extra hardware, and it can be cut to length if a shorter run is needed for the install. Hot and ground wire leads come off one end of the strip for a straightforward 12 volt hookup. The strip is water and moisture resistant, making it suitable for exposed deck areas and compartments where splashes and humidity are a concern, and its low amp draw means it will not run down the boat's batteries during extended use. This 24 inch length is part of a broader T-H Marine flex strip light lineup offered in additional lengths and colors, letting boat owners standardize on the same style of lighting throughout the boat while choosing the length and color that fits each application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LED-51952\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Flex Strip Light - 24 in. - Red LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip Length:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 6 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of LEDs:\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 3M backing tape, adheres to most clean surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water and moisture resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Hot and ground wire leads from one end of the strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1 x 3.6 x 3.6 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the T-H Marine LED-51952 strip light?\u003c\/strong\u003e The LED-51952 flex strip light measures 24 inches long in its red LED version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this strip light be cut to a shorter length?\u003c\/strong\u003e Yes, the LED-51952 flex strip can be cut to length, so it can be shortened to fit a smaller mounting area than the full 24 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this light run on?\u003c\/strong\u003e This is a 12 volt light rated at 6 watts, with hot and ground wire leads coming off one end of the strip for wiring into a 12 volt boat electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-51952 waterproof?\u003c\/strong\u003e The strip is water and moisture resistant, which suits deck areas and gunwale compartments where it will be exposed to splashes and humidity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the strip light mounted?\u003c\/strong\u003e It mounts using quality 3M backing tape, allowing installation on most clean surfaces without additional hardware or drilling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this light drain my boat battery?\u003c\/strong\u003e No, the LED-51952 has a low amp draw designed specifically so it will not run batteries down during use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color LED does the LED-51952 use?\u003c\/strong\u003e This part number is the red LED version of the T-H Marine flex strip light lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this strip light good for lighting under the gunwale?\u003c\/strong\u003e Yes, the LED-51952 is designed for lighting a deck or under the gunwale areas of a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many LEDs are on the 24 inch strip?\u003c\/strong\u003e The 24 inch red LED-51952 strip contains 300 LEDs along its length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the LED-51952?\u003c\/strong\u003e The order includes one 24 inch red LED flex strip light with 3M backing tape already applied and wire leads for hookup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes T-H Marine offer this strip light in other lengths or colors?\u003c\/strong\u003e Yes, the flex strip light series that includes the LED-51952 is also offered in 1 ft., 2 ft., 4 ft., and 6 ft. Lengths, and in white, blue, red, green, and white\/blue combo LED colors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on the LED-51952?\u003c\/strong\u003e The LED-51952 red LED flex strip light carries a 1 year manufacturer warranty.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991266767067,"sku":"T-H-LED-51952-DP","price":33.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/LED-51946_04_dd5cc7cd-7527-4a53-ac2b-da89dc0fe54f.jpg?v=1784498830"},{"product_id":"t-h-marine-led-51894-white-led-courtesy-companion-way-light-2-1-4-square-hidden-fasteners-white-bezel-white-leds","title":"T-H Marine LED-51894 White LED Courtesy Companion Way Light, 2-1\/4 Inch Square","description":"\u003cp\u003eThe T-H Marine LED-51894 is a white-bezel LED courtesy companion way light built for lighting compartments, rod lockers, gear bins, and walkways aboard a boat. The 2-1\/4 inch square fixture houses 3 white LEDs behind a frosted polycarbonate lens, producing a super-bright 15 lumen output that is diffused evenly across the face rather than throwing a harsh point of glare, which makes it well suited to marking a pathway or lighting a storage area without blinding the person using it.\u003c\/p\u003e\u003cp\u003eEach LED-51894 draws only 15 milliamps at 12 volts, so a bank of these lights can run for extended periods with minimal impact on battery capacity, and the LEDs themselves are rated for up to 100,000 hours of service life. The circuit board is fully sealed in epoxy, protecting it from water intrusion, corrosion, and the vibration that is constant on a moving boat. Installation uses a hidden-fastener design, so once mounted there are no exposed screw heads on the visible face of the light, giving a clean, finished look in cabinetry, helm areas, and storage compartments. The fixture requires a 1-3\/4 inch mounting hole to accept its 2.25 inch x 2.25 inch square body.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LED-51894\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Count:\u003c\/strong\u003e 3 LEDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Size:\u003c\/strong\u003e 2-1\/4 inch square (2.25 inches x 2.25 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Hidden fasteners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Frosted polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 15 milliamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Output:\u003c\/strong\u003e 15 lumens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 15 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Lifespan:\u003c\/strong\u003e Up to 100,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3.6 inches x 1 inch x 3.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572076608\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the LED-51894 used for?\u003c\/strong\u003e The T-H Marine LED-51894 is a courtesy companion way light designed to illuminate compartments, rod lockers, gear bins, and walkways, or to light a pathway or storage area on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the LED-51894?\u003c\/strong\u003e This model has a white bezel with 3 white LEDs behind a frosted lens. T-H Marine also offers the same light with a black bezel and white LEDs, and a version with a white bezel and exposed fasteners, as separate part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole does the LED-51894 need?\u003c\/strong\u003e The LED-51894 requires a 1-3\/4 inch mounting hole to fit its 2.25 inch x 2.25 inch (2-1\/4 inch square) body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LED-51894 have exposed screws once installed?\u003c\/strong\u003e No. The LED-51894 uses a hidden-fastener design, so no screw heads are visible on the face of the light after installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the LED-51894 run on?\u003c\/strong\u003e The LED-51894 operates on 12 volts and draws only 15 milliamps, making it an efficient choice for continuous use on a boat's electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow bright is the LED-51894?\u003c\/strong\u003e The 3 white LEDs in the LED-51894 produce a super-bright 15 lumen output through a frosted polycarbonate lens that diffuses the light evenly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do the LEDs in the LED-51894 last?\u003c\/strong\u003e The LEDs used in the LED-51894 are rated for up to 100,000 hours of service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-51894 waterproof?\u003c\/strong\u003e The circuit board in the LED-51894 is completely sealed in epoxy, protecting it from water intrusion, corrosion, and vibration typical of marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of on the LED-51894?\u003c\/strong\u003e The LED-51894 uses a frosted polycarbonate (PC) lens, which diffuses the LED output rather than producing a sharp point of light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the LED-51894 weigh?\u003c\/strong\u003e The T-H Marine LED-51894 weighs 0.09 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the LED-51894?\u003c\/strong\u003e The LED-51894 measures 3.6 inches x 1 inch x 3.6 inches overall, with a 2.25 inch x 2.25 inch square face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-51894 a good fit for rod lockers and storage bins?\u003c\/strong\u003e Yes, the LED-51894 is sized and rated for exactly this use, lighting compartments, rod lockers, and gear bins as a companion way light.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991266799835,"sku":"T-H-LED-51894-DP","price":16.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sand-plastic-bezel-3-white-leds-hidden-fasteners-discontinued-led-courtesy-companion-way-light-28287065325611.jpg?v=1784498834"},{"product_id":"t-h-marine-led-courtesy-companion-way-light-3-led-square-interior-boat-light-2-1-4-black-bezel-12v-waterproof-hidden-fasteners-led-51891","title":"T-H Marine LED-51891 Square LED Courtesy Companion Way Light, Black Bezel, White LED, Hidden Fastener Mount","description":"\u003cp\u003eThe T-H Marine LED-51891 is a 2-1\/4 inch square LED courtesy light designed to light pathways, stairways, cockpits, cabins, rod lockers, gear bins, and other storage compartments aboard a boat. It features a black bezel with a frosted polycarbonate lens over 3 bright white LEDs, giving a wide, evenly dispersed pool of light rather than a single bright point. The hidden-fastener design means there are no visible screw heads once installed, so the light sits flush and clean against the mounting surface for a factory-finished look.\u003c\/p\u003e\u003cp\u003eEach LED-51891 draws just 15mA at 12 volts and is rated for up to 100,000 hours of service life, so it can stay on for extended periods without meaningfully loading the boat's battery. The circuit board is fully sealed in epoxy, protecting it from water intrusion, corrosion, and the vibration of running in rough conditions. Output is rated at 15 lumens, enough for safe wayfinding without washing out night vision. Installation follows the standard recessed courtesy-light pattern: a 1-3\/4 inch mounting hole accepts the fixture, and the hidden fasteners secure it from behind for a clean face.\u003c\/p\u003e\u003cp\u003eThis light is sold as a final sale item and is not eligible for returns or exchanges, so confirm the bezel color and mounting style (hidden vs. Exposed fasteners) before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LED-51891\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Type:\u003c\/strong\u003e 3-LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Size:\u003c\/strong\u003e 2-1\/4 inches square (2.25 x 2.25 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Hidden Fasteners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 3.6 x 1 x 3.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 12 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Output:\u003c\/strong\u003e 15 lumens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 15 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Life:\u003c\/strong\u003e up to 100,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens:\u003c\/strong\u003e Frosted polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing:\u003c\/strong\u003e Circuit board sealed in epoxy for water, corrosion, and vibration resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572076653\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-H Marine LED-51891 used for?\u003c\/strong\u003e The LED-51891 is a square LED courtesy light meant to illuminate compartments, rod lockers, gear bins, pathways, stairways, cockpits, and cabins on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole do I need to install the LED-51891?\u003c\/strong\u003e The LED-51891 requires a mounting hole with a 1-3\/4 inch diameter, and the light has a 2-1\/4 inch square face that covers the cutout once installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the fasteners visible on the LED-51891?\u003c\/strong\u003e No. The LED-51891 uses a hidden-fastener design, so it mounts flush with no exposed screw heads for a clean finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many LEDs are in this light and what color are they?\u003c\/strong\u003e The LED-51891 contains 3 white LEDs behind a frosted polycarbonate lens, producing about 15 lumens of light output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the LED-51891 run on and how much power does it draw?\u003c\/strong\u003e This light operates on 12 volts and draws only 15mA of current, though its rated wattage is 12 watts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-51891 waterproof?\u003c\/strong\u003e Yes, the circuit board on the LED-51891 is completely sealed in epoxy, which protects it from water intrusion, corrosion, and vibration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do the LEDs in this light last?\u003c\/strong\u003e The LEDs used in the LED-51891 are rated for up to 100,000 hours of life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color bezel does the LED-51891 come in?\u003c\/strong\u003e The LED-51891 has a black bezel; a white-bezel version with the same hidden-fastener mounting is sold separately as a different part number, so double check the bezel color before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I get this light with exposed fasteners instead?\u003c\/strong\u003e The LED-51891 is the hidden-fastener version; a version with exposed fasteners is available as a separate part number if that mounting style is preferred.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the LED-51891?\u003c\/strong\u003e The LED-51891 measures approximately 3.6 x 1 x 3.6 inches overall, with a 2-1\/4 inch square face and a 1-3\/4 inch mounting hole diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the LED-51891 weigh?\u003c\/strong\u003e The LED-51891 weighs 0.09 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I return the LED-51891 if it doesn't fit?\u003c\/strong\u003e The LED-51891 is sold as a final sale item and is not eligible for returns or exchanges, so confirm bezel color, mounting style, and hole diameter before purchasing.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991266865371,"sku":"T-H-LED-51891-DP","price":16.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sand-plastic-bezel-3-white-leds-hidden-fasteners-discontinued-led-courtesy-companion-way-light-28287065325611_4d861d3f-25f4-4961-accd-d79ae30a7409.jpg?v=1784498841"},{"product_id":"t-h-marine-blue-led-boat-lighting-kit-complete-accent-light-kit-with-slim-line-utility-lights-and-flex-strips-led-btkit-blue","title":"T-H Marine LED-BTKIT-BLUE LED Lighting Kit for Boats - Blue, 9-Piece Accent Light Set","description":"\u003cp\u003eThe T-H Marine LED-BTKIT-BLUE is a complete accent lighting kit that lets you add blue LED lighting anywhere on your boat. Whether you want to see clearly to work on tackle or gear after dark, highlight your gunwales and deck, or simply give your boat a custom look at night, this kit provides everything needed for a full installation without having to buy individual lights separately.\u003c\/p\u003e\u003cp\u003eThe kit includes three different LED light styles to cover multiple mounting needs: three 4 inch Slim Line LED Utility Lights for focused task lighting, four 12 inch Flex Strip LED Lights for accenting longer runs such as gunwales or rod lockers, and two 24 inch Flex Strip LED Lights for larger areas like the hull sides or deck perimeter. All lights in the kit are blue LEDs, giving a consistent accent color across the entire installation. The kit is built for marine use and is waterproof, making it suitable for exposed and semi-exposed boat locations.\u003c\/p\u003e\u003cp\u003eThis is a distributor-packaged kit (blister pack) designed for boat owners who want a straightforward, all-in-one solution rather than sourcing individual utility and flex strip lights separately. No assembly is required for the components themselves; installation involves mounting each light and wiring per standard 12V accessory wiring practices.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LED-BTKIT-BLUE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e 3 x 4 inch Slim Line LED Utility Lights, 4 x 12 inch Flex Strip LED Lights, 2 x 24 inch Flex Strip LED Lights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 11 x 7 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.56 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Distributor packaging, blister pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the T-H Marine LED-BTKIT-BLUE kit?\u003c\/strong\u003e The LED-BTKIT-BLUE kit includes 3 four-inch Slim Line LED Utility Lights, 4 twelve-inch Flex Strip LED Lights, and 2 twenty-four-inch Flex Strip LED Lights, all in blue, for a total of 9 individual lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the LEDs in this kit?\u003c\/strong\u003e All lights in the LED-BTKIT-BLUE kit are blue LEDs, giving a consistent accent color across every light in the set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this lighting kit waterproof?\u003c\/strong\u003e Yes, the T-H Marine LED-BTKIT-BLUE kit is waterproof and designed for marine use on boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit require assembly?\u003c\/strong\u003e No assembly is required for the LED-BTKIT-BLUE lights themselves; installation is limited to mounting the lights and connecting standard 12V wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat sizes of lights come in this kit?\u003c\/strong\u003e The kit provides three light sizes: 4 inch Slim Line utility lights, 12 inch flex strips, and 24 inch flex strips, letting you match the light to the area being accented.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use these lights to see while working on tackle or gear at night?\u003c\/strong\u003e Yes, the Slim Line LED Utility Lights included in the LED-BTKIT-BLUE kit are intended for task lighting so you can see to work on tackle or gear in the dark.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the flex strip lights used for?\u003c\/strong\u003e The 12 inch and 24 inch Flex Strip LED Lights in this kit are used for accent lighting along longer runs such as gunwales, rod lockers, or deck perimeters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre other colors available besides blue?\u003c\/strong\u003e The LED-BTKIT-BLUE kit is the blue LED version; T-H Marine also offers this same kit configuration in other LED colors under different part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this kit packaged?\u003c\/strong\u003e The LED-BTKIT-BLUE is distributor packaged in a blister pack format.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the LED-BTKIT-BLUE kit?\u003c\/strong\u003e The T-H Marine LED-BTKIT-BLUE kit weighs 0.56 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of this kit?\u003c\/strong\u003e The LED-BTKIT-BLUE kit has package dimensions of 11 x 7 x 3 inches.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991266963675,"sku":"T-H-LED-BTKT-BLUE","price":151.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/LED-BTKIT-WHT_01_b1407725-46c3-43db-9698-26eb480a0ffd.jpg?v=1784498855"},{"product_id":"t-h-marine-led-btkit-wht-white-led-boat-lighting-kit-9-piece-accent-kit-3x-4-utility-4x-12-2x-24-flex-strips","title":"T-H Marine LED-BTKIT-WHT LED Lighting Kit for Boats, White, 9-Piece Set","description":"\u003cp\u003eThe T-H Marine LED-BTKIT-WHT is a complete 9-piece LED lighting kit for adding accent lighting anywhere on a boat. The kit pairs three 4 inch Slim Line LED Utility Lights with four 12 inch Flex Strip LED Lights and two 24 inch Flex Strip LED Lights, all in white LED, giving boat owners enough fixtures to light a deck, gunwale area, tackle station, or storage compartment from a single kit rather than buying strips and utility lights separately.\u003c\/p\u003e\u003cp\u003eThe Slim Line utility lights make it easy to see tackle or gear in the dark, while the Flex Strip lights are suited to accent lighting under gunwales or along deck edges. The lights carry a waterproof rating, making them suitable for the wet conditions common on a boat. The kit is distributor packaged in a blister pack, 3 per case.\u003c\/p\u003e\u003cp\u003eThis white-LED version is one of several color options T-H Marine offers in this kit line, so boat owners who want a different look can match their preferred LED color when ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LED-BTKIT-WHT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e 3 x 4 inch Slim Line LED Utility Lights, 4 x 12 inch Flex Strip LED Lights, 2 x 24 inch Flex Strip LED Lights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source Type:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3 x 7 x 22 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.56 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Distributor packaged, blister pack, 3 per case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572082159\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned to install on any boat; not limited to a specific make or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers apply to this kit.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the T-H Marine LED-BTKIT-WHT kit?\u003c\/strong\u003e The LED-BTKIT-WHT kit includes 3 four-inch Slim Line LED Utility Lights, 4 twelve-inch Flex Strip LED Lights, and 2 twenty-four-inch Flex Strip LED Lights, all with white LEDs, for a total of 9 pieces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-BTKIT-WHT lighting kit waterproof?\u003c\/strong\u003e Yes, the T-H Marine LED-BTKIT-WHT kit carries a waterproof rating, making it suitable for the wet conditions found on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the LEDs in this kit?\u003c\/strong\u003e The LED-BTKIT-WHT kit uses white LEDs. T-H Marine also offers the same kit in blue, red, and green LED versions under different part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit fit any boat?\u003c\/strong\u003e The LED-BTKIT-WHT kit is designed to install on any boat rather than being limited to a specific make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the LED-BTKIT-WHT boat kit and the T-H Marine trailer kit?\u003c\/strong\u003e LED-BTKIT-WHT is built for on-boat use and includes Slim Line utility lights plus 12 inch and 24 inch flex strips, while the trailer kit (LED-TRLKIT-WHT) is a different part number built for trailers and includes only 24 inch and 48 inch flex strips.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the LED-BTKIT-WHT kit?\u003c\/strong\u003e The LED-BTKIT-WHT kit measures 3 x 7 x 22 inches and weighs 0.56 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LED-BTKIT-WHT kit require any assembly?\u003c\/strong\u003e No, the T-H Marine LED-BTKIT-WHT kit does not require assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the T-H Marine LED-BTKIT-WHT kit?\u003c\/strong\u003e The UPC for the T-H Marine LED-BTKIT-WHT lighting kit is 733572082159.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the LED-BTKIT-WHT kit packaged?\u003c\/strong\u003e LED-BTKIT-WHT ships in distributor packaging, a blister pack, 3 units per case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-BTKIT-WHT kit a genuine T-H Marine product?\u003c\/strong\u003e Yes, LED-BTKIT-WHT is a genuine T-H Marine part, sold as the white-LED version of T-H Marine's boat lighting kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the Slim Line utility lights in this kit useful for working on tackle or gear?\u003c\/strong\u003e Yes, the Slim Line LED Utility Lights included in the LED-BTKIT-WHT kit are designed to help you see tackle or gear in the dark.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991266996443,"sku":"T-H-LED-BTKIT-WHT","price":151.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/LED-BTKIT-WHT_01.jpg?v=1784498855"},{"product_id":"t-h-marine-blue-pontoon-under-deck-led-light-kit-two-25ft-ip68-submersible-strips-for-24-30-pontoon-boats-led-pbdk25b","title":"T-H Marine LED-PBDK25B Blue Pontoon Boat Under Deck LED Light Kit - 25 ft Strips for 24-30 Foot Boats","description":"\u003cp\u003eThe T-H Marine LED-PBDK25B is a blue under-deck LED light kit built for pontoon boats in the 24 to 30 foot range. The kit includes two 25 foot (7.5m) flat, flexible ribbon LED light strips rated IP68 for full waterproof and submersible protection. Each strip is built with a silicone tube construction and a silicone gel fill, giving the strips the flexibility and durability needed to withstand ongoing exposure to sun, water, and vibration in a marine environment.\u003c\/p\u003e\u003cp\u003eThe kit is designed to run on a marine grade 12 volt on\/off switch and draws 10.08 watts. Installation is straightforward: the strips mount into included channels that come with adhesive strips pre-installed, so the lights can be positioned along the underside of the deck or rail without additional hardware. A waterproof wiring harness is included to connect the strips for a clean, weather-sealed hookup. Blue LED color gives the boat a distinctive accent glow for evening and night use on the water, and the low power draw keeps the kit efficient for extended run time.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LED-PBDK25B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Length Compatibility:\u003c\/strong\u003e 24 to 30 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Strip Length:\u003c\/strong\u003e 25 feet (7.5m) per strip, two strips included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Rating:\u003c\/strong\u003e IP68, fully waterproof and submersible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Silicone tube with silicone gel fill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 10.08 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Corded electric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance Level:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 60 x 14.5 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Length:\u003c\/strong\u003e 11 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.6125 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Mounting channels with adhesive strips pre-installed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Two 25 foot IP68 LED light strips, waterproof wiring harness, and mounting channels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572089400\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00733572089400\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the LED-PBDK25B light kit made for?\u003c\/strong\u003e The LED-PBDK25B kit is sized for pontoon boats in the 24 to 30 foot range, and it includes two 25 foot (7.5m) LED light strips to cover that length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pontoon light kit waterproof?\u003c\/strong\u003e Yes, the LED strips in the LED-PBDK25B kit are rated IP68, meaning they are fully waterproof and submersible, built with a silicone tube and silicone gel fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the LEDs in this kit?\u003c\/strong\u003e The LED-PBDK25B kit produces blue light, giving the under-deck area a blue accent glow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the LED-PBDK25B?\u003c\/strong\u003e The kit includes two 25 foot IP68 LED light strips, a waterproof wiring harness, and mounting channels with adhesive strips already applied.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the LED-PBDK25B installed?\u003c\/strong\u003e Installation is done by mounting the included channels, which have adhesive strips pre-installed, along the underside of the deck or rail, then connecting the strips using the included waterproof wiring harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LED-PBDK25B include an on\/off switch?\u003c\/strong\u003e The kit is designed to work with a marine grade 12 volt on\/off switch, but the included components are limited to the LED strips, wiring harness, and mounting channels, so a compatible switch should be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the LED-PBDK25B run on?\u003c\/strong\u003e The LED-PBDK25B operates on a 12 volt system, consistent with standard marine 12V wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much power does the LED-PBDK25B draw?\u003c\/strong\u003e The kit draws 10.08 watts, which is low enough for extended use without placing a heavy load on the boat's electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the LED strips made of?\u003c\/strong\u003e Each strip in the LED-PBDK25B kit is a flat, flexible ribbon LED strip built with a silicone tube and silicone gel fill for marine-grade waterproofing and flexibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the LED-PBDK25B weigh and what are its dimensions?\u003c\/strong\u003e The LED-PBDK25B weighs 5.6125 pounds, with item dimensions of 60 x 14.5 x 4 inches and an item length of 11 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a shorter version of this light kit for smaller pontoons?\u003c\/strong\u003e T-H Marine also offers the same style of light set with 20 foot strips for pontoons in the 16 to 22 foot range, as an alternative to the 25 foot strips in the LED-PBDK25B for 24 to 30 foot boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the LED-PBDK25B strips be fully submerged in water?\u003c\/strong\u003e Yes, the strips are IP68 rated, which means they are designed to be fully waterproof and submersible, not just splash resistant.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991267127515,"sku":"T-H-LED-PBDK25B-DP","price":489.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/blue-pontoon-light-set-led-pontoon-lights-31820891750443.jpg?v=1784498868"},{"product_id":"t-h-marine-blue-under-deck-pontoon-light-kit-20ft-ip68-submersible-led-strips-12v-fits-16-22-boats-led-pbdk20b","title":"T-H Marine LED-PBDK20B Blue Pontoon Under Deck LED Light Kit - 20 ft Strips for 16-22 ft Boats","description":"\u003cp\u003eThe T-H Marine LED-PBDK20B is a blue under-deck LED light kit built for pontoon boats in the 16 to 22 foot range. The kit centers on two 20 foot (6 meter) flat, flexible ribbon LED strip lights that are IP68 rated, meaning they are fully waterproof and submersible. Each strip is housed in a silicone tube with silicone gel fill, giving the LEDs a sealed, marine-durable construction that stands up to spray, splash, and constant exposure beneath the deck.\u003c\/p\u003e\u003cp\u003eThe kit includes both 20 foot LED strips, a waterproof wiring harness, and mounting channels with adhesive strips pre-installed, so the strips can be positioned and secured without additional hardware. Installation is straightforward: the mounting channels are affixed with the pre-applied adhesive, and the strips snap into the channels for a clean, finished look along the under-deck rails or trim of the pontoon. The system runs on 12 volts DC and is designed to work with a marine grade 12 volt on\/off switch, allowing the lights to be wired into the boat's existing 12 volt electrical system for simple on\/off control.\u003c\/p\u003e\u003cp\u003eThis blue LED kit is intended to add accent lighting and visibility beneath the deck of a pontoon boat, whether for evening use, safety, or overall appearance. Because the kit is built specifically for 16 to 22 foot boats, buyers with larger pontoons should confirm strip length needs before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LED-PBDK20B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Pontoon Boat Under Deck LED Light Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Color:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Strip Type:\u003c\/strong\u003e Flat, flexible ribbon LED strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Strip Length:\u003c\/strong\u003e Two 20 foot (6 meter) strips included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP68, fully waterproof and submersible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip Housing Material:\u003c\/strong\u003e Silicone tube with silicone gel fill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e DC power supply; designed to work with a marine grade 12 volt on\/off switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 16 to 22 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Two 20 foot IP68 LED light strips, waterproof wiring harness, mounting channels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Method:\u003c\/strong\u003e Adhesive strips pre-installed on mounting channels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572089301\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.98 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the LED-PBDK20B light kit designed for?\u003c\/strong\u003e The T-H Marine LED-PBDK20B is designed for pontoon boats in the 16 to 22 foot range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the LED strips in this kit?\u003c\/strong\u003e The LED-PBDK20B kit includes two LED strips, each 20 feet (6 meters) long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-PBDK20B pontoon light kit waterproof?\u003c\/strong\u003e Yes. The strips are IP68 rated, fully waterproof and submersible, built with a silicone tube and silicone gel fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the LED-PBDK20B kit use?\u003c\/strong\u003e It runs on 12 volts DC and is designed to work with a marine grade 12 volt on\/off switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LED-PBDK20B kit come with an on\/off switch?\u003c\/strong\u003e No. The kit includes the LED strips, a waterproof wiring harness, and mounting channels, but it is designed to work with a marine grade 12 volt on\/off switch that is wired in separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the LED-PBDK20B kit?\u003c\/strong\u003e The kit includes two 20 foot IP68 LED light strips, a waterproof wiring harness, and mounting channels with adhesive strips pre-installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you install the LED-PBDK20B light strips?\u003c\/strong\u003e Installation uses the included mounting channels, which have adhesive strips pre-installed, so the channels can be stuck in place and the LED strips fitted into them without extra hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the LEDs on the LED-PBDK20B kit?\u003c\/strong\u003e The LED-PBDK20B kit produces blue light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the LED-PBDK20B light kit weigh?\u003c\/strong\u003e The complete LED-PBDK20B kit weighs 4.98 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a version of this kit for a larger pontoon boat?\u003c\/strong\u003e Yes. T-H Marine also offers the LED-PBDK25B kit with two 25 foot LED strips for 24 to 30 foot boats; it is a separate part number from the 20 foot LED-PBDK20B kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the LED-PBDK20B strips be mounted under the deck of a pontoon boat?\u003c\/strong\u003e Yes, this kit is built as an under-deck lighting solution, with strips rated IP68 for full waterproof and submersible use in that environment.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991267225819,"sku":"T-H-LED-PBDK20B-DP","price":424.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/blue-pontoon-light-set-led-pontoon-lights-31820891750443_01b8da4b-920d-48d9-a962-a68e5a1419a3.jpg?v=1784498873"},{"product_id":"t-h-marine-lwlm-1p-led-dome-head-livewell-light-fully-potted-submersible-white-led-1-inch-od-5-8-inch-cut-out","title":"T-H Marine LWLM-1P-LED Dome Head LED Livewell Light, Fully Potted Waterproof, White, 1 Inch OD, 5\/8 Inch Cutout","description":"\u003cp\u003eThe T-H Marine LWLM-1P-LED is a fully potted LED livewell and courtesy light built to illuminate livewells for easier culling and night fishing. Because the LED assembly is completely potted, the light is totally waterproof and can be mounted fully submerged, so it keeps working even when the livewell is filled and sloshing around underway. It delivers steady LED illumination without the heat buildup that can come from traditional incandescent livewell bulbs, making it a safer option for extended use in a wet compartment. The compact dome head design has a 1 inch outer diameter and installs through a 5\/8 inch cutout, keeping the footprint small for mounting in livewells, baitwells, and other tight compartments where a larger light will not fit. A neoprene sealing gasket is included to help keep the mounting surface sealed against water intrusion and secure against vibration while underway. The white LED output improves visibility of bait and catch inside the tank, helping anglers manage fish, monitor conditions, and work efficiently in low light or after dark. This LED version complements T-H Marine's broader Dome Head Livewell Light lineup, which is also offered in an incandescent option and in an unpotted version (LWL-1LED) that is waterproof from the front only and uses a snap-in LED bulb, sharing the same body and mounting style.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LWLM-1P-LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dome Head LED Livewell\/Courtesy Light, Potted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Cutout:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Fully potted, totally waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Can be mounted completely submerged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket:\u003c\/strong\u003e Neoprene sealing gasket included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572063004\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e LWLM-1PLED\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eLWLM-1PLED\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-H Marine LWLM-1P-LED?\u003c\/strong\u003e It is a fully potted LED livewell and courtesy light, part number LWLM-1P-LED, designed to illuminate livewells for easier culling and night fishing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this light be mounted underwater?\u003c\/strong\u003e Yes, the LWLM-1P-LED is fully potted and totally waterproof, so it can be mounted completely submerged inside a livewell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole do I need to install this light?\u003c\/strong\u003e The LWLM-1P-LED has a 1 inch outer diameter and installs through a 5\/8 inch mounting cutout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the LWLM-1P-LED light?\u003c\/strong\u003e This version of the LWLM-1P-LED livewell light is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the light run hot like an incandescent bulb?\u003c\/strong\u003e No, the LED design of the LWLM-1P-LED lights livewells without the harmful heat associated with traditional incandescent livewell bulbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a gasket included for installation?\u003c\/strong\u003e A neoprene sealing gasket is included with the LWLM-1P-LED to help keep the mounting surface sealed and secure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the LWLM-1P-LED weigh?\u003c\/strong\u003e The T-H Marine LWLM-1P-LED weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an incandescent version of this light?\u003c\/strong\u003e Yes, T-H Marine offers this Dome Head Livewell Light in either LED or incandescent versions, with the LWLM-1P-LED being the LED, fully potted option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the LWLM-1P-LED and the LWL-1LED?\u003c\/strong\u003e The LWLM-1P-LED is fully potted and waterproof for complete submersion, while the LWL-1LED is an unpotted version that is waterproof from the front only, with a non-waterproof rear and a snap-in LED bulb; both share the same body and mounting style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent part number for this light?\u003c\/strong\u003e Yes, the LWLM-1P-LED has an OEM equivalent part number of LWLM-1PLED.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this light typically used for besides livewells?\u003c\/strong\u003e Beyond livewell illumination, the LWLM-1P-LED also works as a general courtesy light in wet or submersible boat compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the LWLM-1P-LED?\u003c\/strong\u003e The UPC for the T-H Marine LWLM-1P-LED is 733572063004.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991269716187,"sku":"T-H-LWLM-1PLEDDP","price":16.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/white-led-dome-head-livewell-light-28009482944555.jpg?v=1784498935"},{"product_id":"anderson-v391c-surface-mount-boat-interior-courtesy-light-12-volt-dome-light","title":"Anderson V391C Surface Mount Boat Interior Courtesy Light, 12 Volt Dome Light","description":"\u003cp\u003eThe Anderson V391C is a 12-volt surface mount interior courtesy light designed for general illumination inside boats. The polycarbonate lens attaches to a metal base for a durable, corrosion-resistant fixture that is easy to install on any flat interior surface. A nylon switch is built into the unit, allowing the light to be turned on and off directly at the fixture without a separate wall switch. The lens is finished in white and the light uses a standard incandescent bulb.\u003c\/p\u003e\u003cp\u003eThis courtesy light is intended for dome-style mounting and is commonly used to light cabins, berths, cockpits, and other interior spaces where a compact, low-profile fixture is needed. Its 12-volt design makes it compatible with standard marine electrical systems. The combination of a metal base and polycarbonate lens gives the fixture resistance to the vibration, moisture, and temperature swings typical of a marine interior, while the nylon switch resists corrosion better than metal alternatives.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Anderson\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e V391C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Courtesy Lights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Type:\u003c\/strong\u003e Courtesy Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Location:\u003c\/strong\u003e Dome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Type:\u003c\/strong\u003e Incandescent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Material:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Material:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Anderson V391C courtesy light use?\u003c\/strong\u003e The Anderson V391C is a 12-volt interior courtesy light, matching standard marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the V391C surface mount or recessed?\u003c\/strong\u003e It is a surface mount fixture, with the lens attaching to a metal base for installation directly onto a flat interior surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the lens on the V391C?\u003c\/strong\u003e The lens is white, providing general-purpose illumination for interior spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of on this Anderson courtesy light?\u003c\/strong\u003e The V391C lens is made of polycarbonate, chosen for its durability in a marine interior environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the V391C have a built-in switch?\u003c\/strong\u003e Yes, the V391C features a nylon switch built into the fixture, allowing the light to be turned on and off at the unit itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bulb type does the Anderson V391C use?\u003c\/strong\u003e The Anderson V391C uses a standard incandescent bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the V391C weigh?\u003c\/strong\u003e The Anderson V391C courtesy light weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this light typically mounted?\u003c\/strong\u003e The V391C is a dome-style mounted courtesy light, commonly used for interior cabin, berth, or cockpit illumination.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the base of the V391C metal or plastic?\u003c\/strong\u003e The base is metal, with the polycarbonate lens attaching directly to it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Anderson V391C used for?\u003c\/strong\u003e This 12-volt fixture is used for general interior illumination aboard boats, such as lighting cabins and other enclosed spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the switch on the V391C corrosion resistant?\u003c\/strong\u003e The switch is made of nylon rather than metal, which helps it resist corrosion in a marine environment.\u003c\/p\u003e","brand":"Anderson","offers":[{"title":"Default Title","offer_id":49027431661787,"sku":"AND-V391C","price":7.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/and-v391c_lg__93611.1724353172.500.750.jpg?v=1785163290"},{"product_id":"anderson-e126c-flush-mount-12-volt-marine-courtesy-light-white","title":"Anderson E126C Flush Mount 12 Volt Marine Courtesy Light, White","description":"\u003cp\u003eThe Anderson E126C is a flush mount 12 volt marine courtesy light built for interior, compartment, and general illumination utility use aboard a boat. Its rectangular chrome-plated ABS housing gives a clean, finished look wherever it is installed, while the white light output provides practical, low-glare illumination for cabins, compartments, and utility areas. Installation is straightforward: the light mounts on 2 11\/16 inch centers using lens screws as the mounting hardware, and it requires a 1 1\/4 inch socket mounting hole to accept the twist-in socket assembly. That socket assembly carries both the lead wire and the ground wire together, so the fixture can be wired and mounted on any surface without needing a separate chassis ground connection. The E126C runs on a 12 volt system and uses an incandescent bulb, matching the wiring and power already found in most boats. Because it is a flush mount design, it sits neatly within a cutout rather than protruding, making it well suited for interior panels, compartments, and utility spaces where a low-profile fixture is preferred. It is a straightforward, no-frills courtesy light for boat owners who need reliable general-purpose interior lighting with simple, uniform mounting hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Anderson\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e E126C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Type:\u003c\/strong\u003e Courtesy Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Type:\u003c\/strong\u003e Incandescent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Chrome-plated ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Centers:\u003c\/strong\u003e 2 11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 1 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 044464900957\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal marine courtesy light; not model or engine specific.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eANDE126C\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Anderson E126C used for?\u003c\/strong\u003e The Anderson E126C is a flush mount 12 volt marine courtesy light designed for interior, compartment, and general illumination use on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole does the E126C require?\u003c\/strong\u003e A 1 1\/4 inch socket mounting hole is required to install the twist-in socket assembly used by the Anderson E126C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the mounting screw centers on this light?\u003c\/strong\u003e The Anderson E126C mounts on 2 11\/16 inch centers using lens screws as the mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the E126C run on?\u003c\/strong\u003e This light is a 12 volt fixture, matching the standard 12V electrical systems used on most boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of bulb does the E126C use?\u003c\/strong\u003e The Anderson E126C uses an incandescent bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color light does the E126C produce?\u003c\/strong\u003e It produces a white light, suitable for general interior and compartment illumination.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing made of?\u003c\/strong\u003e Chrome-plated ABS housing is used for the Anderson E126C, giving it a durable, corrosion-resistant finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the E126C include ground wiring?\u003c\/strong\u003e Yes, the twist-in socket assembly on the E126C contains both a lead wire and a ground wire, allowing it to be mounted on any surface without a separate ground connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the E126C weigh?\u003c\/strong\u003e The Anderson E126C weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent part number for the E126C?\u003c\/strong\u003e Yes, ANDE126C is listed as the OEM equivalent part number for the Anderson E126C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Anderson E126C a flush mount or surface mount light?\u003c\/strong\u003e It is a flush mount fixture, sitting within a cutout rather than mounting on the surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Anderson E126C suitable for compartment lighting?\u003c\/strong\u003e Yes, the E126C is designed for interior, compartment, courtesy, or general illumination utility lighting on a boat.\u003c\/p\u003e","brand":"Anderson","offers":[{"title":"Default Title","offer_id":49027431530715,"sku":"AND-E126C","price":8.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/and-e126c_lg__58066.1722378121.500.750.jpg?v=1785163287"},{"product_id":"aqua-signal-16550-7-12v-led-engine-room-light-6-70-x-3-55-inch-square-ip65","title":"Aqua Signal 16550-7 12V LED Engine Room Light, 6.70 x 3.55 Inch Square, IP65","description":"\u003cp\u003eThe Aqua Signal 16550-7 is a 12 Volt LED engine room light built for the toughest lighting environment on a boat. It has a molded polycarbonate housing rated IP65, sealing out water and dust so it holds up under vibration, heat, and moisture exposure typical of an engine compartment. The fixture carries SAEJ1171 certification for ignition protection, meaning it is designed to be used safely in spaces where flammable vapors may be present.\u003c\/p\u003e\u003cp\u003eThe LED light source produces 700 lumens at a 6000K color temperature, giving a bright, white light output well suited to illuminating an engine bay for inspection and maintenance work. The LED is rated for a 20,000 hour service life, reducing the need for bulb replacement over the life of the fixture. It is rated to operate across a wide ambient temperature range of -25C to 45C (-13F to 113F), matching the temperature swings found near a running engine.\u003c\/p\u003e\u003cp\u003eThe light measures 6.70 inches by 3.55 inches in a square profile and installs with two mounting screws, which are included, so no additional hardware purchase or assembly is required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Aqua Signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 16550-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 6.70 x 3.55 inches, square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Output:\u003c\/strong\u003e 700 lumens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor Temperature:\u003c\/strong\u003e 6000K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Lifespan:\u003c\/strong\u003e 20,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP65\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e SAEJ1171 ignition protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range:\u003c\/strong\u003e -25C to 45C (-13F to 113F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Two mounting screws included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 054628165504\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Aqua Signal 16550-7 used for?\u003c\/strong\u003e The Aqua Signal 16550-7 is a 12 Volt LED light designed specifically for lighting engine rooms, an environment that sees heat, vibration, and moisture that standard interior lights are not built to handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this light rated for use near an engine where fuel vapors may be present?\u003c\/strong\u003e Yes, the 16550-7 carries SAEJ1171 certification for ignition protection, meaning it is built to be used safely in spaces such as engine compartments where flammable vapors can occur.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Aqua Signal 16550-7?\u003c\/strong\u003e It measures 6.70 inches by 3.55 inches in a square housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow bright is the 16550-7 and what color is the light?\u003c\/strong\u003e It outputs 700 lumens of white LED light at a 6000K color temperature, bright enough for inspection and maintenance work in an engine bay.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does the LED in the 16550-7 last?\u003c\/strong\u003e The LED is rated for a 20,000 hour service life, so bulb replacement is rarely needed over the life of the fixture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Aqua Signal 16550-7 require?\u003c\/strong\u003e It runs on a 12 Volt DC system, standard for most marine electrical setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 16550-7 waterproof or dustproof?\u003c\/strong\u003e The molded polycarbonate housing carries an IP65 rating, protecting the light against dust ingress and water jets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can the 16550-7 handle?\u003c\/strong\u003e It is rated to operate from -25C to 45C (-13F to 113F), covering the temperature extremes typical near a running engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Aqua Signal 16550-7 come with mounting hardware?\u003c\/strong\u003e Yes, two mounting screws are included, and no additional assembly is required to install the 16550-7.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens material on this light?\u003c\/strong\u003e The lens is made of polycarbonate, chosen for its impact resistance and compatibility with the IP65-rated housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Aqua Signal 16550-7 weigh?\u003c\/strong\u003e The 16550-7 weighs 0.4 pounds.\u003c\/p\u003e","brand":"Aqua Signal","offers":[{"title":"Default Title","offer_id":49030620512475,"sku":"AQS-16550-7","price":75.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51966UUEfsS.jpg?v=1785198131"},{"product_id":"aqua-signal-16604-7-round-led-dome-light-warm-white-and-red-5-5-inch-surface-mount-no-switch","title":"Aqua Signal 16604-7 Round LED Dome Light, Warm White and Red, 5.5 Inch, Surface Mount, No Switch","description":"\u003cp\u003eThe Aqua Signal 16604-7 is a round LED dome light built for interior cabin and helm lighting aboard boats. It combines 21 warm white LEDs producing 195 lumens with 9 red LEDs producing 45 lumens in a single 5.5 inch fixture, giving one light the ability to serve both general living-space illumination and night-vision-friendly cockpit or steering-station lighting. The plastic housing is finished in white and mounts flush to any interior surface using three mounting screws, which are required for installation but not included with the fixture.\u003c\/p\u003e\u003cp\u003eThis unit ships without a switch, so it is intended for installers who are wiring the light into an existing switched circuit or adding their own switching or dimming control rather than relying on a switch built into the fixture. The LEDs are rated for 20,000 hours of service life, making the 16604-7 a low-maintenance, low-amp-draw lighting solution for cabins, salons, cockpits, and other interior spaces where both warm white and red illumination are useful. The compact 5.5 x 5.5 x 1.1 inch profile keeps the fixture unobtrusive on ceilings, bulkheads, and overheads.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Aqua Signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 16604-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Round Dome Light, Modern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5 1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.5 x 5.5 x 1.1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Color:\u003c\/strong\u003e Warm White and Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarm White LED Output:\u003c\/strong\u003e 195 lumens (21 LEDs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed LED Output:\u003c\/strong\u003e 45 lumens (9 LEDs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Lifespan:\u003c\/strong\u003e 20,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface mount, 3 mounting screws required (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 054628166044\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e One year from date of purchase\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the Aqua Signal 16604-7 come with a switch?\u003c\/strong\u003e No, the 16604-7 is sold without a switch, so it needs to be wired into an existing switched circuit or connected to a separately supplied switch or dimmer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this dome light?\u003c\/strong\u003e The Aqua Signal 16604-7 measures 5.5 x 5.5 x 1.1 inches with a 5 1\/2 inch diameter, making it a compact fixture for ceilings, bulkheads, and overheads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 16604-7 installed?\u003c\/strong\u003e It is a surface mount fixture that attaches with three mounting screws; the screws are required for installation but are not included in the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat colors of light does this fixture produce?\u003c\/strong\u003e The 16604-7 produces warm white light from 21 LEDs (195 lumens) and red light from 9 LEDs (45 lumens), covering both general cabin lighting and red night-vision lighting in one fixture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Aqua Signal 16604-7 weigh?\u003c\/strong\u003e This dome light weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing made of?\u003c\/strong\u003e The Aqua Signal 16604-7 has a plastic housing finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do the LEDs in this fixture last?\u003c\/strong\u003e The LEDs are rated for 20,000 hours of use, which reduces the need for bulb replacement over the life of the fixture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this light a low amp draw fixture?\u003c\/strong\u003e Yes, the 16604-7 is a low amp draw LED fixture, which helps conserve battery power compared to incandescent dome lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 16604-7?\u003c\/strong\u003e The box includes one Aqua Signal 16604-7 round LED dome light; mounting screws and any switch are not included and must be supplied separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Aqua Signal 16604-7 covered by a warranty?\u003c\/strong\u003e Yes, it carries a one year warranty from the date of purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a good use case for the red LED setting on this fixture?\u003c\/strong\u003e The red LEDs on the 16604-7 are suited to cockpits and steering stations where preserving night vision matters, while the warm white LEDs suit general living spaces on board.\u003c\/p\u003e","brand":"Aqua Signal","offers":[{"title":"Default Title","offer_id":49030620545243,"sku":"AQS-16604-7","price":35.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51aaOlqEG5L.jpg?v=1785198130"},{"product_id":"t-h-marine-led-33251-low-profile-led-dome-light-stainless-steel-bezel-red-white-combo-ip67-waterproof","title":"T-H Marine LED-33251 Low Profile LED Dome Light, Stainless Steel Bezel, Red\/White Combo, IP67 Waterproof","description":"\u003cp\u003eThe T-H Marine LED-33251 is a low profile LED dome light with a polished stainless steel bezel, built for interior and cabin lighting on boats. It surface mounts to overhead panels, cabin ceilings, or helm areas and draws power from a 10-30 Vdc supply, making it compatible with standard 12-volt marine electrical systems. This version delivers a Red\/White combo LED output: 250 lumens on the white setting, letting you switch between bright white illumination for general use and red light to preserve night vision at the helm or in the cabin. At 12v DC the light draws 410 mA and is rated at 6 watts, keeping power draw low for extended use at anchor. Convenience is built into the design with sensors positioned on the right and left sides of the light body, allowing you to turn the light on and off with a simple touch rather than reaching for a separate switch. The stainless steel light body carries an IP67 ingress protection rating, so it stands up to spray, rain, and the humid conditions typical of a marine environment. It measures 6.75 inches in diameter by 1.13 inches high, with a mounting hole diameter of 3\/4 inch for the wiring pass-through. This LED-33251 Red\/White combo is part of a matching family of low profile dome lights that also includes an all-white version and a Blue\/White combo version, so you can standardize the same low profile stainless design across multiple lighting zones on the same boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LED-33251\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Low Profile Dome LED Light, Stainless Steel Bezel - Red\/White Combo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Color Combination:\u003c\/strong\u003e White \/ Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLumens (White):\u003c\/strong\u003e 250\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 10-30 Vdc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12v DC Amps:\u003c\/strong\u003e 410 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Watts:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 6.75 inches diameter x 1.13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Rating:\u003c\/strong\u003e IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Body Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn\/Off Control:\u003c\/strong\u003e Touch sensors on right and left sides of light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572087352\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat colors does the LED-33251 dome light produce?\u003c\/strong\u003e The LED-33251 is the Red\/White combo version of T-H Marine's low profile dome light, producing 250 lumens on the white setting plus a red light option for preserving night vision at the helm or in a cabin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the LED-33251 mounted?\u003c\/strong\u003e This light is a surface mount fixture, attaching directly to a cabin ceiling, overhead panel, or other flat surface, with a mounting hole diameter of 3\/4 inch for the wiring pass-through.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this light run on?\u003c\/strong\u003e The LED-33251 operates on 10-30 Vdc, making it suited to standard 12-volt marine electrical systems, and it draws 410 mA at 12v DC with a rated output of 6 watts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-33251 waterproof?\u003c\/strong\u003e Yes, the LED-33251 carries an IP67 ingress rating, giving it strong resistance to rain, spray, and humidity in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the LED-33251 dome light made from?\u003c\/strong\u003e The light body and bezel are polished stainless steel, giving the LED-33251 a durable, corrosion-resistant finish suited to boat interiors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you turn the LED-33251 on and off?\u003c\/strong\u003e The LED-33251 has touch sensors on the right and left sides of the light body, so it turns on and off without a separate wall switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the LED-33251?\u003c\/strong\u003e The LED-33251 measures 6.75 inches in diameter by 1.13 inches in height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the LED-33251 weigh?\u003c\/strong\u003e The LED-33251 weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the LED-33251 and other dome lights in this line?\u003c\/strong\u003e The LED-33251 is the Red\/White combo version; T-H Marine also offers the same low profile stainless steel dome light as an all-white LED-33249 and a Blue\/White combo LED-33250, all sharing the same body style and mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow bright is the LED-33251 on the white setting?\u003c\/strong\u003e On the white setting, the LED-33251 outputs 250 lumens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the LED-33251 be used in a cabin as well as at the helm?\u003c\/strong\u003e Yes, the low profile design and dual white\/red LED output make the LED-33251 suitable for cabin lighting as well as helm areas where preserving night vision matters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the LED-33251?\u003c\/strong\u003e The LED-33251 ships as a complete low profile stainless steel LED dome light unit, ready for surface mounting.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":49031289929947,"sku":"T-H-LED-33251-DP","price":176.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/img_651b41c8-86ee-4156-a1e6-9c7e3266b784.jpg?v=1785332842"},{"product_id":"optronics-il21cs-interior-dome-light-with-switch-white-surface-mount","title":"Optronics IL21CS Interior Dome Light with Switch, White, Surface Mount","description":"\u003cp\u003eThe Optronics IL21CS is a surface-mount interior dome light built for boats, RVs, and other vehicles that need reliable, compact cabin illumination with onboard control. It features an integrated on\/off toggle switch right at the fixture, so occupants can turn the light on or off without a separate wall switch or panel connection. The housing pairs a durable steel base plate with a polycarbonate lens, giving the fixture resistance to impact and the vibration common in marine and mobile applications, while keeping the unit lightweight at 0.34 pounds. Both the lens and the bulb are replaceable, which means the fixture does not need to be discarded and replaced as a whole unit if the bulb burns out or the lens becomes scratched or discolored over time. The IL21CS is hardwired, supplied with both a lead wire and a ground wire, and runs on a 12.8VDC electrical system drawing 2.4A. Its compact footprint of 4.563 inches by 2.5 inches by 1.75 inches allows it to fit into tight overhead or cabin mounting locations, and it mounts on a 3\/5 inch center. Finished in white, the light blends easily into most interior color schemes. Optronics backs the IL21CS with a three year warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Optronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e IL21CS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Interior Dome Light with Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polycarbonate lens, steel base plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage\/Amp Draw:\u003c\/strong\u003e 12.8VDC - 2.4A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Center:\u003c\/strong\u003e 3\/5 inch center\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Toggle on\/off switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Hardwired with lead and ground wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.563 inches x 2.5 inches x 1.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.34 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 047286752155\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Three Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Optronics IL21CS?\u003c\/strong\u003e It is a surface-mount interior dome light with a built-in on\/off toggle switch, designed for boats, RVs, and similar interior cabin applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the IL21CS come with a switch?\u003c\/strong\u003e Yes, the IL21CS has an integrated on\/off toggle switch mounted directly on the fixture, so no separate wall switch is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this dome light?\u003c\/strong\u003e The IL21CS is finished in white, which blends with most interior cabin color schemes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the IL21CS dome light?\u003c\/strong\u003e The Optronics IL21CS measures 4.563 inches by 2.5 inches by 1.75 inches and mounts on a 3\/5 inch center.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the IL21CS weigh?\u003c\/strong\u003e The IL21CS interior dome light weighs 0.34 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and amp draw does the IL21CS use?\u003c\/strong\u003e This light operates on 12.8VDC and draws 2.4A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the lens or bulb be replaced?\u003c\/strong\u003e Yes, both the lens and the bulb on the IL21CS are replaceable, so the entire fixture does not need to be swapped out for a bulb replacement or a scratched lens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the IL21CS made of?\u003c\/strong\u003e The IL21CS uses a polycarbonate lens paired with a steel base plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the IL21CS wired?\u003c\/strong\u003e The IL21CS is hardwired and supplied with both a lead wire and a ground wire for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the IL21CS a surface-mount or recessed light?\u003c\/strong\u003e The IL21CS is a surface-mount fixture, mounted directly to the interior surface rather than recessed into it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Optronics IL21CS?\u003c\/strong\u003e The IL21CS is covered by a three year warranty from Optronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a multi-pack option for this light?\u003c\/strong\u003e Yes, the IL21CS6 is the same interior dome light with switch offered as a six-pack under its own part number.\u003c\/p\u003e","brand":"Optronics","offers":[{"title":"Default Title","offer_id":49031301234907,"sku":"OPT-IL-21CS","price":9.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51aU5vsCvnL.jpg?v=1785212876"},{"product_id":"t-h-marine-slim-line-led-utility-strip-light-4-surface-mount-12v-led-strip-white-or-blue","title":"T-H Marine Slim Line LED Utility Strip Light - 4\" Surface-Mount 12V LED Strip, White or Blue","description":"\u003cp\u003eThe T-H Marine Slim Line LED Utility Strip Light delivers compact, waterproof accent and task lighting for boats, RVs, and other vehicles wherever a clean, low-profile light is needed. Each 4-inch strip carries 6 bright LEDs behind a clear lens and mounts to virtually any flat surface with no cutting or through-wall drilling required. The fully epoxy-sealed circuit board is submersible and 100% waterproof, standing up to spray, washdowns, and vibration in the harshest marine environments, while the low 12-volt amp draw keeps battery drain to a minimum. Choose from crisp white for general-purpose illumination or cool blue for mood and accent lighting in cabins, cockpits, livewells, and storage compartments.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: T-H Marine\u003c\/li\u003e\n\u003cli\u003eLength: 4 inches\u003c\/li\u003e\n\u003cli\u003eLED Count: 6 LEDs\u003c\/li\u003e\n\u003cli\u003eLens: Clear\u003c\/li\u003e\n\u003cli\u003eVoltage: 12 Volts\u003c\/li\u003e\n\u003cli\u003eMounting Type: Surface Mount\u003c\/li\u003e\n\u003cli\u003eWater Resistance: Submersible, 100% waterproof\u003c\/li\u003e\n\u003cli\u003eCircuit Board Protection: Fully sealed in epoxy to resist water, corrosion, and vibration\u003c\/li\u003e\n\u003cli\u003eWeight: 0.09 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis Slim Line LED Utility Strip Light is available in two LED colors: White for bright, functional lighting in work areas, storage, and steps, and Blue for accent lighting in cabins, courtesy areas, and underwater-adjacent applications like livewells. Both share the same 4-inch length, 6-LED count, surface-mount installation, and fully waterproof epoxy-sealed construction, so simply pick the color that fits your application.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"White","offer_id":49047470899419,"sku":"T-H-LED-51800-DP","price":22.94,"currency_code":"USD","in_stock":false},{"title":"Blue","offer_id":49047470932187,"sku":"T-H-LED-51801-DP","price":23.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/slim-line-led-utility-strip-lights-28278970384427_6ca7319b-bda3-4cbc-a3a8-cc442943893f.jpg?v=1785426150"},{"product_id":"t-h-marine-led-oblong-courtesy-light-polished-316-stainless-steel-bezel-available-in-blue-red-or-white","title":"T-H Marine LED Oblong Courtesy Light, Polished 316 Stainless Steel Bezel - Available in Blue, Red, or White","description":"\u003cp\u003eLight up your boat's cockpit, gunwales, steps, and swim platform with the T-H Marine LED Oblong Courtesy Light. Each fixture pairs a polished 316 stainless steel bezel with a sealed, waterproof LED module behind a clear plastic lens, giving you a durable, corrosion-resistant accent light that looks as good as it performs. The compact 3 x 1.25 inch oblong housing surface-mounts with hidden fasteners for a clean, finished look with no visible screw heads, and the epoxy-sealed circuit board stands up to spray, vibration, and the marine environment for the long haul. Wired for standard 12 volt boat electrical systems and rated for up to 100,000 hours of LED life, this light is built to be a set-it-and-forget-it upgrade for nighttime visibility and curb appeal at the dock.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: T-H Marine\u003c\/li\u003e\n\u003cli\u003eHousing: Polished 316 stainless steel bezel\u003c\/li\u003e\n\u003cli\u003eDimensions: 3 x 1.25 inches\u003c\/li\u003e\n\u003cli\u003eLens: Clear plastic\u003c\/li\u003e\n\u003cli\u003eVoltage: 12 volt\u003c\/li\u003e\n\u003cli\u003eMounting: Surface mount with hidden fasteners\u003c\/li\u003e\n\u003cli\u003eLED Lifespan: Up to 100,000 hours\u003c\/li\u003e\n\u003cli\u003eSealing: Waterproof, epoxy-sealed circuit board\u003c\/li\u003e\n\u003cli\u003eWeight: 0.09 lbs per light\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis oblong courtesy light is available in three LED colors: Blue, White, and Red. Blue and White are popular choices for cockpit, deck, and step accent lighting, while Red preserves night vision at the helm or in cabin walkways. All three share the same housing dimensions, stainless bezel, and mounting method, so pick the color that matches your boat's lighting scheme or the mood you want on the water.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Blue","offer_id":49047958094043,"sku":"T-H-LED-51823-DP","price":26.98,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":49047958126811,"sku":"T-H-LED-51825-DP","price":26.92,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":49047958159579,"sku":"T-H-LED-51824-DP","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/led-oblong-courtesy-lights-28270644887595_68569399-e775-4081-9c74-7583ca49423c.jpg?v=1785432672"},{"product_id":"t-h-marine-led-flex-strip-light-24-cuttable-boat-accent-lighting-blue-or-green","title":"T-H Marine LED Flex Strip Light - 24\" Cuttable Boat Accent Lighting, Blue or Green","description":"\u003cp\u003eThe T-H Marine LED Flex Strip Light is a 24-inch, 12-volt flexible LED strip built to add clean, low-draw accent lighting to any boat. It mounts in seconds with a 3M adhesive backing to decks, gunwales, livewells, consoles, or under gunnel storage, and the strip itself is fully cuttable so it can be trimmed down to fit tight or custom spaces without special tools. Water and moisture resistant construction lets it handle spray and exposure typical of an open boat, while the low amp draw means it runs off a 12-volt system without putting a meaningful dent in battery life. A single set of hot and ground wire leads comes off one end of the strip, keeping the wiring simple for a straightforward tie-in to your existing 12-volt wiring or a switched accessory circuit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: T-H Marine\u003c\/li\u003e\n\u003cli\u003eStrip Length: 24 inches\u003c\/li\u003e\n\u003cli\u003eVoltage: 12 volts\u003c\/li\u003e\n\u003cli\u003eWiring: Hot and ground wire leads from one end of the strip\u003c\/li\u003e\n\u003cli\u003eMounting: 3M adhesive backing tape\u003c\/li\u003e\n\u003cli\u003eWater Resistance: Water and moisture resistant\u003c\/li\u003e\n\u003cli\u003eCuttable: Can be cut to length\u003c\/li\u003e\n\u003cli\u003eWeight: 0.09 pounds\u003c\/li\u003e\n\u003cli\u003eItem Dimensions: 1 x 3.6 x 3.6 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis flex strip light is offered in a single 24-inch length in two LED color options: Blue or Green. Pick the LED color that matches your boat's existing accent lighting scheme or the mood you want for cockpit, deck, or livewell lighting - both versions share identical length, voltage, mounting, and wiring, so the only difference is the light color itself.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Blue","offer_id":49048407376091,"sku":"T-H-LED-51951-DP","price":33.34,"currency_code":"USD","in_stock":false},{"title":"Green","offer_id":49048407408859,"sku":"T-H-LED-51965-DP","price":33.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/LED-51946_04_4cbec036-448a-4152-ad26-ec094f89348d.jpg?v=1785436363"},{"product_id":"innovative-lighting-surface-mount-led-step-light-available-in-red-and-white-white","title":"Innovative Lighting Surface Mount LED Step Light - Available in Red and White\/White","description":"\u003cp\u003eAdd low-profile, energy-efficient courtesy lighting to steps, gunwales, cockpits, and companionways with the Innovative Lighting Surface Mount LED Step Light. This compact fixture mounts flush to any flat surface with just two screws and draws minimal current from your 12V DC house battery, making it practical to run several around the boat without taxing your electrical system. Choose the red-lens version to preserve night vision at the helm, or the white\/white version for brighter general-purpose accent and safety lighting in cockpits, swim platforms, and interior steps.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Innovative Lighting\u003c\/li\u003e\n\u003cli\u003eType: Courtesy Light \/ Step Light\u003c\/li\u003e\n\u003cli\u003eMounting Style: Surface Mount\u003c\/li\u003e\n\u003cli\u003eMounting Location: Steps, gunwales, cockpit, interior\u003c\/li\u003e\n\u003cli\u003eLight Source: LED (3 LEDs)\u003c\/li\u003e\n\u003cli\u003eVoltage: 12V DC (9-16 Volt DC tolerant, model dependent)\u003c\/li\u003e\n\u003cli\u003eMaterial: Plastic housing\u003c\/li\u003e\n\u003cli\u003eLow current draw for continuous use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis step light is available in two lens\/color configurations. Pick red if the fixture will be near the helm or anywhere crew need to preserve night vision while underway. Pick white\/white for a brighter, general-purpose courtesy light in cockpits, swim platforms, or below-deck steps where maximum visibility matters more than night vision. Both versions share the same compact surface-mount footprint and low-profile design, so either will install into the same cutout-free flat-surface location.\u003c\/p\u003e","brand":"Innovative Lighting","offers":[{"title":"Red","offer_id":49049138135259,"sku":"I-L-003-4000-7","price":12.35,"currency_code":"USD","in_stock":false},{"title":"White\/White","offer_id":49049138168027,"sku":"I-L-003-5100-7","price":12.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/I-L-003-4000-7_lg__35515.1558114590.500.750_16d1f644-e1eb-4688-a8ba-194d9818581f.jpg?v=1785451205"},{"product_id":"innovative-lighting-4-led-boat-courtesy-light-white-case-blue-or-white-led","title":"Innovative Lighting 4-LED Boat Courtesy Light, White Case - Blue or White LED","description":"\u003cp\u003eAdd reliable, low-profile accent and step lighting to your boat with the Innovative Lighting 4-LED Courtesy Light. Housed in a compact white case, this surface-mount fixture is built to run for tens of thousands of hours on a standard 12-volt marine electrical system while drawing almost no current. It is fully potted, sealing the internal electronics against moisture and corrosion, and its shock- and vibration-proof construction is built for the punishment of life on the water. Mount it on steps, handrails, cockpit trim, swim platforms, or interior cabinetry for a clean, factory-look glow. Available with either a blue lens for a classic accent look or an all-white lens for bright, functional task lighting - choose the LED\/lens color that fits the space you are lighting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Innovative Lighting\u003c\/li\u003e\n\u003cli\u003eLED Count: 4 LED\u003c\/li\u003e\n\u003cli\u003eCase Color: White\u003c\/li\u003e\n\u003cli\u003eLight Source: LED\u003c\/li\u003e\n\u003cli\u003eLens Material: Glass\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 9-16 Volt DC\u003c\/li\u003e\n\u003cli\u003eCurrent Draw: Less than 65 mA\u003c\/li\u003e\n\u003cli\u003eRated Service Life: 100,000 hours\u003c\/li\u003e\n\u003cli\u003eSealing: Potted to seal out moisture and prevent corrosion\u003c\/li\u003e\n\u003cli\u003eDurability: Shock and vibration proof\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.57 x 0.57 x 0.82 inches\u003c\/li\u003e\n\u003cli\u003eWeight: 0.05 pounds\u003c\/li\u003e\n\u003cli\u003eFit Type: Universal Fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis courtesy light is offered in two lens\/LED color options, both in the same compact white case and both running on 9-16V DC. Pick \u003cstrong\u003eBlue LED\u003c\/strong\u003e for a traditional cool-blue courtesy glow along steps or handrails, or pick \u003cstrong\u003eWhite LED\u003c\/strong\u003e when you want brighter, more functional illumination for cockpit or cabin areas. Both options share identical mounting dimensions, electrical specs, and sealing, so the choice comes down to the look and brightness you want.\u003c\/p\u003e","brand":"Innovative Lighting","offers":[{"title":"Blue LED","offer_id":49049138659547,"sku":"I-L-004-2100-7","price":13.89,"currency_code":"USD","in_stock":true},{"title":"White LED","offer_id":49049138692315,"sku":"I-L-004-5100-7","price":13.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51_ApogLVIL_1a6a4af9-5c5b-4df5-af99-87df12762a2d.jpg?v=1785451250"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/white-led-dome-head-livewell-light-28009482944555.jpg?v=1785356924","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-lighting-interior-courtesy-lighting.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}