{"title":"Navigation Lights","description":null,"products":[{"product_id":"sea-dog-400180-1-flush-mount-side-navigation-lights-304-stainless-steel-uscg-1-nm-approved-port-starboard-pair-12v","title":"Sea-Dog 400180-1 Flush Mount Side Navigation Lights, 304 Stainless Steel, USCG 1 NM Approved Port \u0026 Starboard Pair, 12V","description":"\u003cp\u003eThe Sea-Dog 400180-1 Flush Mount Side Navigation Lights deliver clean, low-profile sidelight visibility for your vessel. Sold as a matched port and starboard pair, each light is constructed of corrosion resistant stamped 304 stainless steel and carries USCG 1 NM (A-16) approval. Designed for replacement of existing lighting, they mount flush to the hull for an unobtrusive, integrated look with unimpeded sight lines.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 400180-1\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped 304 stainless steel\u003c\/li\u003e\n\u003cli\u003eVoltage: 12V\u003c\/li\u003e\n\u003cli\u003eUSCG approval: 1 NM (A-16)\u003c\/li\u003e\n\u003cli\u003eLength (A): 7-3\/4 in\u003c\/li\u003e\n\u003cli\u003eDimension B: 2-5\/16 in\u003c\/li\u003e\n\u003cli\u003eDimension C: 5-5\/16 in\u003c\/li\u003e\n\u003cli\u003eDimension D: 2-11\/16 in\u003c\/li\u003e\n\u003cli\u003eLight arc: 10 points\u003c\/li\u003e\n\u003cli\u003eFasteners: Four #8 RH (not included)\u003c\/li\u003e\n\u003cli\u003eLens: Clear glass\u003c\/li\u003e\n\u003cli\u003eWeight: 0.68 lb\u003c\/li\u003e\n\u003cli\u003eIncludes: Port and starboard lights (pair)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal application for boats requiring USCG 1 NM side navigation lighting. Intended for replacement of existing lighting, not for new construction. All USCG approved navigation lights must be mounted properly to provide correct visual alignment and unimpeded sight lines; refer to USCG regulations for 1 NM and 2 NM navigation lights before installing.\u003c\/p\u003e\u003ch3\u003eReplacement Parts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplacement Lens: 400181-1\u003c\/li\u003e\n\u003cli\u003eReplacement Bulb: 441032-1 (double contact bayonet base)\u003c\/li\u003e\n\u003cli\u003eReplacement Socket Assembly available\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sea-Dog 400180-1?\u003c\/strong\u003e The Sea-Dog 400180-1 is sold as a pair and includes both a port and a starboard flush mount side navigation light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 400180-1 USCG approved?\u003c\/strong\u003e Yes. The Sea-Dog 400180-1 flush mount side lights are USCG approved for 1 NM (A-16) visibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are these navigation lights made of?\u003c\/strong\u003e They are constructed of corrosion resistant stamped 304 stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage do these lights use?\u003c\/strong\u003e The 400180-1 side lights operate on a 12V system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fasteners are needed to install them?\u003c\/strong\u003e Each light installs with four #8 RH fasteners. The fasteners are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan these be used for new boat construction?\u003c\/strong\u003e No. The 400180-1 flush mount side lights are intended for replacement of existing lighting, not for new construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the replacement lens part number?\u003c\/strong\u003e The replacement lens for the 400180-1 side lights is part number 400181-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat replacement bulb does this light use?\u003c\/strong\u003e The replacement bulb is part number 441032-1, which uses a double contact bayonet base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 400180-1 side light?\u003c\/strong\u003e Each light measures 7-3\/4 in (A) by 2-5\/16 in (B), with a 5-5\/16 in C dimension and a 2-11\/16 in D dimension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the pair weigh?\u003c\/strong\u003e The 400180-1 side light pair weighs approximately 0.68 lb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat lens does the 400180-1 have?\u003c\/strong\u003e It uses a clear glass lens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should USCG navigation lights be mounted?\u003c\/strong\u003e USCG approved navigation lights must be mounted properly to provide correct visual alignment and allow unimpeded sight lines. Refer to USCG regulations for 1 NM and 2 NM navigation lights for details.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988769419483,"sku":"S-D-400180-1","price":49.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51rSM3v7wfL.jpg?v=1784429034"},{"product_id":"attwood-14190-7-portable-led-bow-and-stern-navigation-light-kit-clamp-on-marine-gray-for-small-boats-kayaks-tenders-and-inflatables","title":"Attwood 14190-7 Portable Clamp-On LED Navigation Light Kit, Marine Gray Bow and Stern Lights","description":"\u003cp\u003eThe Attwood 14190-7 is a portable clamp-on LED navigation light kit designed for small boats, tenders, inflatables, kayaks, and other watercraft that lack a permanent 12-volt electrical system. The kit pairs a red\/green LED bow light with a white LED stern light so operators can meet basic nighttime visibility needs without wiring the boat for power. Each light is battery-operated, running on three AAA batteries (not included) for more than 150 hours of continuous use.\u003c\/p\u003e\u003cp\u003eMounting is handled with a quick-release C-clamp and a removable pole, allowing the lights to be attached or removed in seconds with no permanent modification to the hull or gunwale. This makes the 14190-7 well suited to trailered boats, seasonal use, or craft that only need navigation lights occasionally. Construction is built for the marine environment: each light uses a sealed, shock-proof composite housing with a shatter-proof polycarbonate lens to protect the internal LED electronics from moisture and impact. The finish is Marine Gray for a low-profile look on most small-craft color schemes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 14190-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Marine Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Red \/ Green \/ Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e Sealed, shock-proof composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Three AAA batteries (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun Time:\u003c\/strong\u003e 150+ hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Quick-release C-clamp with telescoping and threaded pole options\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Red\/green LED bow light, white LED stern light, quick-release C-clamp mounts, pole, and mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1.5 x 10.75 x 9.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.8667 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697141903\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for small boats, tenders, inflatables, kayaks, and other watercraft without a permanent 12-volt electrical system.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers apply to this product.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the Attwood 14190-7 light kit meant for?\u003c\/strong\u003e The Attwood 14190-7 is designed for small boats, tenders, inflatables, kayaks, and other watercraft that do not have a permanent 12-volt electrical system, since it runs entirely on batteries rather than the boat's wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include both a bow and a stern light?\u003c\/strong\u003e Yes, the kit includes one red\/green LED bow light and one white LED stern light, along with the mounts, pole, and hardware needed to install both.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat batteries does the Attwood 14190-7 use, and are they included?\u003c\/strong\u003e Each light runs on three AAA batteries, which are not included in the kit and need to be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does the battery run time last?\u003c\/strong\u003e On three AAA batteries, the Attwood 14190-7 lights are rated for more than 150 hours of continuous run time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the lights mounted to the boat?\u003c\/strong\u003e Mounting uses a quick-release C-clamp with a telescoping or threaded pole, so the lights clamp on and detach without any permanent drilling or hardware installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 14190-7 kit permanently installed or removable?\u003c\/strong\u003e The lights are portable and removable by design, making the 14190-7 kit a good fit for trailered boats or craft that only need navigation lights occasionally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the housing?\u003c\/strong\u003e The Attwood 14190-7 has a Marine Gray housing finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of?\u003c\/strong\u003e The lenses are shatter-proof polycarbonate, paired with a sealed, shock-proof composite housing to protect the internal LED electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these lights water-resistant?\u003c\/strong\u003e Yes, the Attwood 14190-7 bow and stern lights are water-resistant and built with sealed housings for use in marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 14190-7 kit?\u003c\/strong\u003e The kit includes the red\/green LED bow light, the white LED stern light, quick-release C-clamp mounts, a pole, and mounting hardware; batteries are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Attwood 14190-7 kit?\u003c\/strong\u003e The kit measures 1.5 x 10.75 x 9.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 14190-7 light kit weigh?\u003c\/strong\u003e The Attwood 14190-7 weighs 1.8667 pounds.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989666279643,"sku":"ATT-14190-7","price":38.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-14190-7_1__35085.1558181225.500.750.jpg?v=1785189114"},{"product_id":"attwood-14191-7-portable-led-navigation-light-kit-red-green-bow-white-stern-lights-clamp-on-or-threaded-pole-mount-realtree-max-5-camo","title":"Attwood Portable LED Navigation Light Kit, Camouflage, Clamp-On or Deck Mount, Bow and Stern Lights, 14191-7","description":"\u003cp\u003eThe attwood 14191-7 Portable LED Navigation Light Kit provides removable, battery-powered navigation lighting for small boats, inflatables, kayaks, tenders, and other utility craft that do not have a permanent 12-volt electrical system. The kit is finished in Camouflage and includes a red\/green LED bow light and a white LED stern light, giving a compact, plug-and-play lighting solution for temporary or seasonal nighttime operation. Both lights use attwood's quick-release All-Craft mounts along with a threaded mounting pole, so they can be clamped on or deck mounted and installed or removed without drilling or any permanent modification to the boat.\u003c\/p\u003e\u003cp\u003eEach light housing is sealed and shock-proof, and the lenses are made of shatter-proof polycarbonate, so the internal electronics are protected in wet, harsh marine conditions. The LEDs are powered by three AAA batteries (not included) and are rated for over 150 hours of continuous run time, making the kit a practical option for boaters who need reliable nighttime visibility without wiring a permanent lighting circuit. The quick-release mounts allow the lights to be attached for use and removed for storage or trailering. This kit is intended for small craft applications where portable, battery-operated navigation lighting is needed, offering a flexible option for boats that are not hardwired for 12-volt navigation lights.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 14191-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Camouflage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 3 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 5 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Red \/ Green \/ Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Clamp-on or deck mount, threaded mounting pole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Type:\u003c\/strong\u003e 3 AAA batteries (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun Time:\u003c\/strong\u003e Over 150 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1.5 x 10.75 x 9.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.7667 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Features:\u003c\/strong\u003e Shockproof, Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Clamp-on portable navigation light kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Vehicle Types:\u003c\/strong\u003e Bass Boat, Dinghy, Fishing Boat, Jon Boat, Pontoon, Skeeter, Skiff, Small Boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697141910\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the attwood 14191-7 navigation light kit?\u003c\/strong\u003e The 14191-7 kit includes a red\/green LED bow light, a white LED stern light, quick-release All-Craft mounts, and a threaded mounting pole with mounting hardware, finished in Camouflage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit require a 12-volt electrical system?\u003c\/strong\u003e No. The attwood 14191-7 is a portable, battery-powered kit designed for boats without a permanent 12-volt system, running on three AAA batteries (not included).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do the lights run on a set of batteries?\u003c\/strong\u003e The LED bow and stern lights in the 14191-7 kit are rated for over 150 hours of continuous run time on three AAA batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the lights mounted to the boat?\u003c\/strong\u003e Each light attaches with a quick-release All-Craft mount and threaded mounting pole, allowing clamp-on or deck-mount installation without drilling or permanent modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the 14191-7 kit meant for?\u003c\/strong\u003e This kit is designed for small craft such as bass boats, dinghies, fishing boats, jon boats, pontoons, skiffs, and other small boats that lack a wired 12-volt navigation light system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the light housings waterproof?\u003c\/strong\u003e Yes, the attwood 14191-7 lights have sealed, shock-proof housings and shatter-proof polycarbonate lenses built to withstand wet marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the lenses on the bow and stern lights?\u003c\/strong\u003e The 14191-7 kit uses red and green lenses on the bow light and a clear lens on the white stern light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the lights be removed when not in use?\u003c\/strong\u003e Yes, the quick-release mounts on the 14191-7 kit let you detach the lights for storage or trailering and reattach them when needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the kit?\u003c\/strong\u003e The attwood 14191-7 kit measures 1.5 x 10.75 x 9.5 inches and weighs 1.7667 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre batteries included with the 14191-7 kit?\u003c\/strong\u003e No, the kit requires three AAA batteries which are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and wattage do the LED lights use?\u003c\/strong\u003e The lights in the 14191-7 kit operate at 3 volts and 5 watts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a permanent or portable navigation light setup?\u003c\/strong\u003e The attwood 14191-7 is a portable setup, not a permanent hardwired installation, intended for boats needing temporary or seasonal navigation lighting.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989666410715,"sku":"ATT-14191-7","price":45.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ATT-14191-7-Camo-Light-1__36949.1739477319.500.750.jpg?v=1785188729"},{"product_id":"attwood-14194-7-portable-led-navigation-light-kit-telescoping-c-clamp-bow-stern-lights-real-tree-max-4-camouflage","title":"Attwood Portable LED Navigation Light Kit, Telescoping C-Clamp Mount, Marine Gray, 14194-7","description":"\u003cp\u003eThe attwood 14194-7 is a portable LED navigation light kit built for small boats, dinghies, fishing boats, jon boats, pontoons, skiffs, and other craft that lack a permanent 12-volt electrical system. The kit includes a red\/green LED bow light and a white LED stern light, each mounted on a telescoping pole with a quick-release C-clamp so they can be attached and removed in seconds without tools or wiring. The Marine Gray finish gives the kit a clean, low-profile look on deck when the lights are not in use.\u003c\/p\u003e\u003cp\u003eEach light runs on 4.5 volts DC from three AAA batteries (not included) and delivers over 150 hours of continuous runtime on a set of batteries, making the kit practical for repeated outings before a battery change is needed. The housings are sealed and shockproof, and the lenses are shatter-resistant polycarbonate, so the electronics stay protected from moisture, vibration, and rough handling typical of trailering and on-water use. Because the mounts are clamp-on and the pole telescopes, the kit adjusts to fit a range of gunwale and transom thicknesses without permanent drilling or hardware installation.\u003c\/p\u003e\u003cp\u003eThis kit suits boaters who need compliant, visible navigation lighting for night operation but do not have onboard 12V power, including tenders, kayaks, and other small unpowered or lightly powered craft.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 14194-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Marine Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Telescoping pole with C-clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Red \/ Green \/ Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 4.5 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Type:\u003c\/strong\u003e 3 AAA batteries (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuntime:\u003c\/strong\u003e Over 150 hours continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Clamp-on red\/green bow light and clamp-on telescoping pole white stern light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 11 x 10 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.71 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Vehicle Types:\u003c\/strong\u003e Bass Boat, Dinghy, Fishing Boat, Jon Boat, Pontoon, Skeeter, Skiff, Small Boat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal clamp-on fit for small boats and similar craft without a permanent 12V electrical system; not specific to a make, model, or year.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the attwood 14194-7 kit?\u003c\/strong\u003e The 14194-7 kit includes a red\/green LED bow light and a white LED stern light, each on a clamp-on telescoping pole with quick-release C-clamp mounting hardware, finished in Marine Gray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the attwood 14194-7 require a 12-volt electrical system?\u003c\/strong\u003e No. The 14194-7 runs on 4.5 volts DC from three AAA batteries (not included), so it works on small boats and dinghies that do not have onboard 12V wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do the batteries last in this navigation light kit?\u003c\/strong\u003e The attwood 14194-7 delivers over 150 hours of continuous runtime on a set of three AAA batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the attwood 14194-7 compatible with?\u003c\/strong\u003e This kit fits bass boats, dinghies, fishing boats, jon boats, pontoons, skeeters, skiffs, and other small boats using its clamp-on mounts, with no permanent installation required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the attwood 14194-7 easy to install and remove?\u003c\/strong\u003e Yes, both the bow and stern lights attach with quick-release C-clamps on telescoping poles, allowing tool-free attachment or removal whenever the lights are needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the attwood 14194-7 kit?\u003c\/strong\u003e The 14194-7 is finished in Marine Gray; a Realtree Max-4 camouflage version of the same telescoping C-clamp kit is sold separately as part number 14195-7.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the lenses on this light kit durable?\u003c\/strong\u003e The attwood 14194-7 uses shatter-resistant polycarbonate lenses over sealed, shockproof housings to withstand moisture, vibration, and repeated handling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the 14194-7 kit?\u003c\/strong\u003e The attwood 14194-7 measures 11 x 10 x 2 inches and weighs 1.71 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the attwood 14194-7 come with batteries?\u003c\/strong\u003e No, batteries are not included; the kit requires three AAA batteries per light to operate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there OEM cross-reference numbers for the attwood 14194-7?\u003c\/strong\u003e There are no OEM cross-reference or replacement numbers listed for the attwood 14194-7; it is identified solely by its own part number.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989666869467,"sku":"ATT-14194-7","price":41.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-14194-7_1__24987.1558181292.500.750.jpg?v=1785188328"},{"product_id":"attwood-5040g7-deck-mount-green-sidelight-1-mile-starboard-bow-navigation-light-for-boats-to-39-4-ft","title":"Attwood 5040G7 Starboard Green Deck Mount Navigation Light, 1-Mile 112.5 Degree Visibility, Boats up to 39.4 ft","description":"\u003cp\u003eThe Attwood 5040G7 is a starboard-side, green-lens deck mount navigation light built for boats up to 39.4 ft (12 meters). Its raised base lifts the light above rails and carpeting so it stays visible from other vessels, while a notch in the rear of the base lets wire leads pass through cleanly during installation. The black plastic cover and lens use a twist\/bayonet lock design that secures firmly to the base, sealing out water from the lamp and hull while also concealing the mounting fasteners for a clean finish.\u003c\/p\u003e\u003cp\u003eEach 5040G7 light delivers 1 nautical mile, 112.5 degree light visibility, meeting USCG requirements for a starboard sidelight. It comes with a 9-watt (#906) wedge base lamp already installed and 7 inch wire leads for connecting to a 12 Volt DC power supply. The light mounts directly to the deck using two #10 fasteners (not included) through pre-drilled holes in the base, and stainless steel electrical contacts resist corrosion in the marine environment. Because this is the starboard (green lens) light, it is not interchangeable with the port side; Attwood's matching red-lens light for the port side is sold separately as part number 5040R7.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5040G7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Starboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover Color\/Material:\u003c\/strong\u003e Black Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Deck Mount, Raised Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Diameter:\u003c\/strong\u003e 2-9\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Lead Length:\u003c\/strong\u003e 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Included:\u003c\/strong\u003e 9-watt (#906) wedge base lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Visibility:\u003c\/strong\u003e 1 nautical mile, 112.5 degree, USCG compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Boat Length:\u003c\/strong\u003e 39.4 feet (12 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Requirement:\u003c\/strong\u003e Two #10 fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Contacts:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6.5 x 9.75 x 5.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697009005\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2158 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompanion Port-Side Light:\u003c\/strong\u003e Attwood 5040R7 (red lens, sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBoats up to 39.4 feet (12 meters)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich side of the boat does the Attwood 5040G7 fit?\u003c\/strong\u003e The 5040G7 is a starboard-side navigation light with a green lens. It is not interchangeable with the port side; Attwood's matching red-lens light for the port side is a separate part, 5040R7.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the lens on the 5040G7?\u003c\/strong\u003e Green. The green lens on the Attwood 5040G7 identifies it as the starboard sidelight, as required by navigation light color conventions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5040G7 come with a bulb?\u003c\/strong\u003e Yes, the Attwood 5040G7 ships with a 9-watt (#906) wedge base lamp already installed, along with 7 inch wire leads for wiring to a 12 Volt DC power supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this light run on?\u003c\/strong\u003e The Attwood 5040G7 operates on a 12 Volt DC marine electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 5040G7 mounted?\u003c\/strong\u003e It is a deck mount light with a raised base that elevates it above rails and carpeting for better visibility. It installs with two #10 fasteners (not included) through pre-drilled holes in the base, which measures 2-9\/16 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the visibility rating of the Attwood 5040G7?\u003c\/strong\u003e 1 nautical mile at a 112.5 degree angle, meeting USCG visibility requirements for a starboard sidelight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the 5040G7 rated for?\u003c\/strong\u003e Attwood rates the 5040G7 for use on boats up to 39.4 feet (12 meters) in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cover of the 5040G7 made from?\u003c\/strong\u003e The 5040G7 uses a black plastic cover and lens housing that twist\/bayonet-lock onto the base to seal out water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the electrical contacts on the 5040G7 corrosion resistant?\u003c\/strong\u003e Yes, the Attwood 5040G7 uses stainless steel electrical contacts, which resist corrosion in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the wire leads on the 5040G7?\u003c\/strong\u003e The Attwood 5040G7 has 7 inch wire leads for connecting to the boat's 12 Volt DC power supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a matching light for the other side of the boat?\u003c\/strong\u003e Yes. The Attwood 5040G7 covers the starboard (green lens) side; the port side (red lens) is a separate part number, 5040R7.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a stainless steel version of this light available?\u003c\/strong\u003e Yes, Attwood also offers a stainless steel base version of this deck mount light, part number 5040SS1, as an alternative to the black plastic 5040G7.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989670277339,"sku":"ATT-5040G7","price":26.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Attwood_Starboard_Side_Navigation_Light_Higher_Angle__11718.1722501080.500.750.jpg?v=1785188309"},{"product_id":"attwood-5040r7-deck-mount-red-sidelight-1-mile-navigation-bow-light-with-raised-base-for-boats-up-to-39-4-ft","title":"Attwood 5040R7 Red Deck Mount Navigation Sidelight, 112.5 Degree, 1-Mile Visibility, Boats up to 39.4 ft","description":"\u003cp\u003eThe Attwood 5040R7 is a red deck mount navigation sidelight designed for boats up to 39.4 ft (12 meters). It uses a raised base to elevate the light above rails and carpeting so the red lens stays visible from the correct sight lines, and a notch molded into the rear of the mounting base lets wire leads pass through cleanly during installation. The light is rated for 112.5 degree visibility at a distance of 1 mile, meeting the visibility angle expected of a sidelight in this class.\u003c\/p\u003e\u003cp\u003eThe cover is black plastic, and the unit's electrical contacts are stainless steel so they resist the corrosion that quickly degrades unprotected metal contacts in a marine environment. It comes with a 9-watt wedge base bulb installed and is drilled with two mounting holes sized for #10 screws, so no additional drilling template is needed for a standard deck mount installation. At 0.2158 pounds, it is light enough for typical bow or rail mounting without added hardware stress.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5040R7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black cover, red lens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Deck mount, raised base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Visibility:\u003c\/strong\u003e 1 mile, 112.5 degree angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Boat Length:\u003c\/strong\u003e 39.4 feet (12 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Included:\u003c\/strong\u003e 9-watt wedge base bulb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Contacts:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 12 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7.5 x 9.75 x 5.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Two pre-drilled holes for #10 screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2158 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBoats up to 39.4 feet (12 meters) in length\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boat size is the Attwood 5040R7 rated for?\u003c\/strong\u003e The 5040R7 is rated for use on boats up to 39.4 feet (12 meters) in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 5040R7 a red or green sidelight?\u003c\/strong\u003e The 5040R7 is the red-lens version; Attwood offers the same light with a green lens under a different part number for the opposite installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the light visibility range and angle?\u003c\/strong\u003e 112.5 degrees is the rated visibility angle, and the light is visible from 1 mile away.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bulb does the 5040R7 come with?\u003c\/strong\u003e A 9-watt wedge base bulb is included with the Attwood 5040R7 and installed at the factory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 5040R7 mounted?\u003c\/strong\u003e It is a deck mount light with a raised base, secured with two pre-drilled mounting holes sized for #10 screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the mounting base have a notch in it?\u003c\/strong\u003e The notch molded into the rear of the 5040R7's mounting base provides a passage for the wire leads so they are not pinched under the base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 5040R7 made of?\u003c\/strong\u003e The cover on the 5040R7 is plastic, while its electrical contacts are stainless steel to resist corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 5040R7 weigh?\u003c\/strong\u003e The Attwood 5040R7 weighs 0.2158 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the packaged light?\u003c\/strong\u003e The Attwood 5040R7 measures 7.5 x 9.75 x 5.75 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a stainless steel cover option for this light?\u003c\/strong\u003e Yes, Attwood's 5040 series is also offered with a stainless steel cover (model 5040SS1) as an alternative to the black plastic cover used on the 5040R7.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 5040R7 run on?\u003c\/strong\u003e The Attwood 5040R7 operates on a 12 volt system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use a raised-base deck light instead of a standard one?\u003c\/strong\u003e The raised base on the 5040R7 lifts the light above rails and carpeting so its visibility is not blocked at deck level.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989670408411,"sku":"ATT-5040R7","price":26.16,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Attwood_Port_Side_Navigation_Light__16570.1722504938.500.750.jpg?v=1785188642"},{"product_id":"attwood-5045-7-stainless-steel-combination-bow-navigation-light-red-green-deck-mount-1-mile-visibility","title":"Attwood 5045-7 Black Deck Mount Bow Navigation Light, Starboard Green Lens","description":"\u003cp\u003eThe Attwood 5045-7 is a deck mount bow navigation light built for the starboard side of the boat, identifiable by its green lens set in a black cover with a stainless steel trim. It delivers 1-mile light visibility across a 112.5 degree arc, meeting the visibility angle needed for a starboard-side navigation light on a boat underway at night or in low visibility. The light is powered by a 12-volt DC electrical system and ships with a 9-Watt (#906) wedge base lamp already fitted, along with 7-inch wire leads for connecting straight into the boat's wiring harness.\u003c\/p\u003e\u003cp\u003eSealing is handled by a bayonet lock design that locks the lens and cover tightly to the base, keeping water out of the lamp housing and the deck below. Installation is a deck mount job, securing with two #10 fasteners for a low-profile fit that sits flush against the deck rather than a pedestal-style base. The 5045-7 is built as a direct swap for older, worn, or damaged legacy 5040-series combination bow lights, making it a straightforward replacement rather than a full rewire job. Because this is a side-specific light, be sure to order the matching port-side (red lens) light separately if a pair is needed; the port light is a different part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5045-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Deck Mount Bow Navigation Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Starboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Visibility:\u003c\/strong\u003e 1 mile, 112.5 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLamp:\u003c\/strong\u003e 9-Watt (#906) wedge base lamp, included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Leads:\u003c\/strong\u003e 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Deck mount, two #10 fasteners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal:\u003c\/strong\u003e Bayonet lock design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 6.5 x 10 x 5.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2238 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697504579\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat side of the boat is the Attwood 5045-7 designed for?\u003c\/strong\u003e The Attwood 5045-7 is a starboard-side navigation light, identified by its green lens; the matching port-side light with a red lens is a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far away can the 5045-7 be seen at night?\u003c\/strong\u003e The 5045-7 provides 1-mile light visibility across a 112.5 degree arc, meeting standard navigation light visibility for the starboard side of a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat lamp does the 5045-7 use?\u003c\/strong\u003e It comes fitted with a 9-Watt (#906) wedge base lamp, which is a standard, replaceable bulb rather than a sealed LED unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Attwood 5045-7 mounted?\u003c\/strong\u003e The 5045-7 is a deck mount light that installs directly to the boat's deck using two #10 fasteners for a low-profile fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 5045-7 waterproof?\u003c\/strong\u003e Yes. The 5045-7 uses a bayonet lock design that seals the lens and cover tightly to the base, keeping water out of the lamp housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 5045-7?\u003c\/strong\u003e The Attwood 5045-7 measures 6.5 x 10 x 5.75 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 5045-7 weigh?\u003c\/strong\u003e The 5045-7 weighs 0.2238 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 5045-7 run on?\u003c\/strong\u003e The light runs on a 12-volt DC marine electrical system and includes 7-inch wire leads for connecting to the boat's wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 5045-7 replace an older bow light?\u003c\/strong\u003e Yes, the 5045-7 is built as a direct swap for older, worn, or damaged legacy 5040-series combination bow lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 5045-7's cover and lens?\u003c\/strong\u003e The 5045-7 has a black cover with a stainless steel trim and a green lens, marking it as the starboard-side light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5045-7 come with the bulb installed?\u003c\/strong\u003e Yes, the Attwood 5045-7 ships with its 9-Watt (#906) wedge base lamp already included, ready to wire in after mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs assembly required for the 5045-7?\u003c\/strong\u003e Yes, some assembly is required when installing the 5045-7, which mounts to the deck with two #10 fasteners and then wires into the boat's 12-volt system.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989670506715,"sku":"ATT-5045-7","price":28.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/High_Angle_View_of_Attwood_Combo_Side_Navigation_Lights_5045-7__57452.1722368972.500.750.jpg?v=1785188988"},{"product_id":"attwood-5092-14-7-bi-color-stowaway-bow-navigation-light-14-inch-aluminum-pole-with-universal-locking-collar","title":"Attwood Bi-Color Stowaway Bow Navigation Pole Light 5092-14-7, 14-Inch with Dual Locking Collar","description":"\u003cp\u003eThe attwood 5092-14-7 is a bi-color stowaway bow navigation light built for boaters who need a code-compliant forward light that can be removed and stowed when not underway. The 14-inch aluminum pole carries a combination red and green lens at the top, throwing a 225 degree light arc so port and starboard sides are marked from a single fixture. A dual locking collar at the base secures the pole to a cam lock or threaded deck base, letting you lock the light upright for night running and pull it free for daytime storage or off-season removal.\u003c\/p\u003e\u003cp\u003ePower comes through a simple two-pin wedge-base connection, keeping installation and light replacement straightforward. The light is rated for use on boats up to 12 meters (39.4 feet) and runs on a 12 volt DC system. The lens housing is acrylic for clarity and impact resistance, and the finish is built to hold up to marine spray and sun exposure. This pole light is sold as the complete assembly: pole, locking collar, and bi-color lens in one unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5092-14-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bi-Color Bow Navigation Pole Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver (pole)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Red and Green (bi-color)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Acrylic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 8 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Spread:\u003c\/strong\u003e 225 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Length:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4.9 x 21.1 x 2.2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Dual locking collar, fits cam lock or threaded bases\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Two-pin wedge base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVessel Length Rating:\u003c\/strong\u003e Up to 12 meters (39.4 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697921475\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the attwood 5092-14-7 pole light do?\u003c\/strong\u003e It is a bi-color bow navigation light showing red and green in a single 225 degree arc, mounted on a 14-inch aluminum pole for use as a boat's forward navigation light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is this light rated for?\u003c\/strong\u003e The 5092-14-7 is intended for use on boats up to 12 meters, or 39.4 feet, in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the pole light mounted and can it be removed?\u003c\/strong\u003e Yes, the 5092-14-7 uses a dual locking collar at the base of the pole that locks into a cam lock or threaded deck base, so the light can be locked in place while underway and pulled out for stowage during the day or off-season.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the pole on this light?\u003c\/strong\u003e The attwood 5092-14-7 has a 14-inch aluminum pole with the combination light and locking collar mounted at the top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the light?\u003c\/strong\u003e The attwood 5092-14-7 measures 4.9 x 21.1 x 2.2 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and wattage does the 5092-14-7 run on?\u003c\/strong\u003e This light operates on a 12 volt DC system and draws 8 watts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of electrical connection does it use?\u003c\/strong\u003e The 5092-14-7 connects with a two-pin wedge-base fitting, allowing the pole to be plugged in for use or unplugged for removal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of and what colors does it show?\u003c\/strong\u003e The lens on the attwood 5092-14-7 is acrylic and shows both red and green simultaneously across a 225 degree spread, functioning as a combination bow light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the attwood 5092-14-7 waterproof?\u003c\/strong\u003e Yes, the 5092-14-7 is built as a waterproof marine navigation light suitable for boat deck use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 5092-14-7?\u003c\/strong\u003e The attwood 5092-14-7 is sold as a complete pole light assembly: the 14-inch aluminum pole, the bi-color LED lens head, and the dual locking collar base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the pole light need to be wired into a fixed base separately?\u003c\/strong\u003e The 5092-14-7 pole itself locks into a cam lock or threaded base at the bow; the base is what stays mounted while the pole with its two-pin connector plugs in and out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine attwood part?\u003c\/strong\u003e Yes, part number 5092-14-7 is manufactured by attwood as their bi-color stowaway bow navigation pole light.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989670539483,"sku":"ATT-5092-14-7","price":39.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5092__14608.1722355672.500.750.jpg?v=1785188531"},{"product_id":"attwood-5091-14-7-pulsar-bi-color-stowaway-pole-light-14-in-angled-aluminum-1-mile-225-degree-red-green-bow-navigation-light-for-boats-to-39-4-ft","title":"Attwood 5091-14-7 Bi-Color Stowaway Pole Light, 14 Inch Angled Aluminum Pole","description":"\u003cp\u003eThe Attwood 5091-14-7 Bi-Color Stowaway Pole Light is a plug-in navigation light built for boats up to 39.4 feet (12 meters). It delivers 1 nautical mile of bi-color (red\/green) visibility across a 225-degree field, meeting the visibility needs of small to mid-size boats after sunset or in low-visibility conditions. The light head sits atop a 14-inch angled, anodized aluminum pole that raises it above bow obstacles such as trolling motors, anchors, and stowed gear, so the red and green sectors stay unobstructed from other vessels.\u003c\/p\u003e\u003cp\u003eThe pole uses a standard 2-pin base connection, so it plugs directly into compatible Attwood light bases and lifts out for storage when not needed, keeping the foredeck clear for fishing, anchoring, or docking. The lens is acrylic in a bi-color red\/green configuration, mounted on a silver-finish pole assembly. Illumination comes from an included 9-watt wedge base incandescent lamp. The 5091-14-7 is compatible with standard Attwood 2-pin bases, including base part numbers 910R2, 910V2, 910T2, 2520, 911339, and 911370.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5091-14-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bi-Color Stowaway Pole Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Length:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Style:\u003c\/strong\u003e Angled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Material:\u003c\/strong\u003e Anodized Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Bi-Color (Red\/Green)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Acrylic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility:\u003c\/strong\u003e 1 nautical mile, 225 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e Up to 39.4 feet (12 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 2-Pin Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLamp Included:\u003c\/strong\u003e 9-Watt Wedge Base Incandescent Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2.25 x 4.87 x 20.37 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6166 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Bases:\u003c\/strong\u003e 910R2, 910V2, 910T2, 2520, 911339, 911370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the pole on the Attwood 5091-14-7?\u003c\/strong\u003e The Attwood 5091-14-7 uses a 14-inch angled, anodized aluminum pole. Attwood also offers a 19-inch angled version under a separate part number for boats needing extra elevation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is this light rated for?\u003c\/strong\u003e The 5091-14-7 is rated for boats up to 39.4 feet (12 meters), providing 1 nautical mile of bi-color visibility across a 225-degree field.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color light does the 5091-14-7 produce?\u003c\/strong\u003e It is a bi-color navigation light, showing red and green simultaneously across a 225-degree arc, as required for bow-mounted sidelights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5091-14-7 come with a bulb?\u003c\/strong\u003e Yes, a 9-watt wedge base incandescent lamp is included with the Attwood 5091-14-7 pole light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat base does the Attwood 5091-14-7 plug into?\u003c\/strong\u003e It uses a standard 2-pin mounting base and is compatible with Attwood light bases 910R2, 910V2, 910T2, 2520, 911339, and 911370.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I remove the pole when the boat is in storage?\u003c\/strong\u003e Yes, the 5091-14-7 pole lifts out of its 2-pin base for easy removal and stowing when the light is not in use, keeping the bow clear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pole made of?\u003c\/strong\u003e The 5091-14-7 pole is anodized aluminum with a silver finish, and the lens is acrylic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 5091-14-7?\u003c\/strong\u003e The Attwood 5091-14-7 measures 2.25 x 4.87 x 20.37 inches and weighs 0.6166 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 5091-14-7 waterproof?\u003c\/strong\u003e Yes, the Attwood 5091-14-7 is built for marine use with waterproof construction suited to open-boat exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 5091-14-7 and the 19-inch version?\u003c\/strong\u003e The 5091-14-7 has a 14-inch angled pole, while Attwood's 19-inch angled pole light is a separate part number (5091-19-1) for boats that need the light mounted higher above bow obstacles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5091-14-7 run on 12-volt boat power?\u003c\/strong\u003e Yes, the Attwood 5091-14-7 is a 12-volt navigation light designed for standard marine electrical systems.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989670736091,"sku":"ATT-5091-14-7","price":41.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Attwood_Bent_Bi_Color_Pole_Light_Globe__35087.1722519115.500.750.jpg?v=1785188901"},{"product_id":"attwood-5110-24-7-traditional-frosted-globe-all-round-stern-light-24-inch-pole-2-mile-360-degree","title":"Attwood All-Round Frosted Globe Stern Light, 24-Inch Pole with 2-Pin Locking Collar","description":"\u003cp\u003eThe Attwood 5110-24-7 is an all-round frosted globe stern light built to keep your boat visible after dark. The frosted globe lens delivers a full 360-degree illumination pattern, meeting the classic all-round light profile used on the stern of small to mid-size boats, and is rated for vessels up to 65.6 feet in length. It ships with a 9-watt wedge-base lamp already installed, so it is ready to wire in without sourcing a separate bulb.\u003c\/p\u003e\u003cp\u003eThe light is mounted on a 24-inch pole finished for marine use, with a 2-pin locking collar base that keeps the pole seated securely even when the boat is underway in chop. The lens is glass with a clear frosted finish, and the fixture runs on a standard 12-volt marine electrical system. Attwood backs the light with a 90-day manufacturer warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5110-24-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Boat Stern Lights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 9 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Glass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Length:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 2-Pin Locking Collar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIllumination Range:\u003c\/strong\u003e 2 nautical miles, 360 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.5 x 27.5 x 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.2333 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697110244\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Boat Length:\u003c\/strong\u003e 65.6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eIntended for use on boats up to 65.6 feet in length.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 5110-24-7?\u003c\/strong\u003e It is an all-round frosted globe stern light with a 24-inch pole, part number 5110-24-7, providing 360-degree illumination for boats up to 65.6 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5110-24-7 come with a bulb?\u003c\/strong\u003e Yes, the light includes a 9-watt wedge-base lamp already fitted, so no separate bulb purchase is needed to get the 24-inch stern light working.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far can this light be seen?\u003c\/strong\u003e The Attwood 5110-24-7 provides 2-nautical-mile visibility at 360 degrees, matching standard all-round navigation light range requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pole length on this light?\u003c\/strong\u003e The pole measures 24 inches, which is the length designation in the 5110-24-7 part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the light mounted to the boat?\u003c\/strong\u003e It mounts using a 2-pin locking collar base at the bottom of the pole, designed to hold the light securely in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is this light designed for?\u003c\/strong\u003e The 5110-24-7 is intended for use on boats up to 65.6 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of?\u003c\/strong\u003e The globe lens on this Attwood stern light is glass with a clear, frosted finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this light run on?\u003c\/strong\u003e The Attwood 5110-24-7 operates on a standard 12-volt marine electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 5110-24-7 weigh?\u003c\/strong\u003e This stern light weighs 5.2333 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this light?\u003c\/strong\u003e Item dimensions for the 5110-24-7 are 5.5 x 27.5 x 3.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on this Attwood light?\u003c\/strong\u003e Attwood covers the 5110-24-7 with a 90-day manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this light a genuine Attwood part?\u003c\/strong\u003e Yes, part number 5110-24-7 is a genuine Attwood all-round frosted globe stern light, not an aftermarket copy.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989670867163,"sku":"ATT-5110-24-7","price":32.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41n2cpfmGEL.jpg?v=1784486880"},{"product_id":"attwood-5358-p12-7-folding-all-round-pole-light-12-360-degree-2-nm-incandescent-navigation-light-with-mounting-base","title":"Attwood Folding All-Round Pole Light, 12 Inch Incandescent, 5358-P12-7","description":"\u003cp\u003eThe Attwood 5358-P12-7 is a 12 inch folding all-round pole light built to keep your boat visible from sunset to sunrise or in any low-visibility conditions. The 12 inch black plastic pole raises the incandescent light source for better sightlines, projecting a 360 degree all-round beam with a 2 nautical mile range of visibility so nearby boaters can spot your position from a safe distance. The light runs on 12 volts and uses a clear plastic lens over the incandescent bulb.\u003c\/p\u003e\u003cp\u003eA folding design with cam lock operation lets the pole lay flat when not needed and lock securely upright when underway, making it easy to stow and quick to deploy. The unit includes a black Light Armor horizontal mounting base for straightforward installation on deck or gunwale. No assembly is required out of the box. Attwood engineers and manufactures this light for reliable, functional navigation lighting on boats of all types.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5358-P12-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Length:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Material:\u003c\/strong\u003e Black plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source Type:\u003c\/strong\u003e Incandescent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Range:\u003c\/strong\u003e 2 nautical miles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam Pattern:\u003c\/strong\u003e 360 degree all-round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Folding with cam lock operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Base:\u003c\/strong\u003e Light Armor horizontal mounting base included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 16 x 4 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697535870\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the visibility range of the Attwood 5358-P12-7 pole light?\u003c\/strong\u003e The Attwood 5358-P12-7 provides a 2 nautical mile range of visibility in a 360 degree radius, so it is visible to nearby boaters from a safe distance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow tall is the pole on this light?\u003c\/strong\u003e The pole on the 5358-P12-7 is 12 inches long and made of black plastic, raising the light for increased visibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the light fold down for storage?\u003c\/strong\u003e Yes, the 5358-P12-7 uses a folding design with cam lock operation, so the pole can be lowered flat when not in use and locked upright when underway.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this light run on?\u003c\/strong\u003e The Attwood 5358-P12-7 operates on 12 volts, matching standard boat electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of bulb does the 5358-P12-7 use?\u003c\/strong\u003e This light uses an incandescent light source behind a clear plastic lens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the light come with a mounting base?\u003c\/strong\u003e Yes, the 5358-P12-7 includes a black Light Armor horizontal mounting base for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs assembly required before installing the 5358-P12-7?\u003c\/strong\u003e No assembly is required; the Attwood 5358-P12-7 folding pole light is ready to install out of the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the packaged light?\u003c\/strong\u003e The Attwood 5358-P12-7 measures 16 x 4 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 5358-P12-7 weigh?\u003c\/strong\u003e The 5358-P12-7 weighs 0.5625 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 5358-P12-7?\u003c\/strong\u003e The UPC for the Attwood 5358-P12-7 folding pole light is 022697535870.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I use this navigation light?\u003c\/strong\u003e The 5358-P12-7 is intended for use from sunset to sunrise or anytime visibility is poor, helping mark your boat's position to nearby traffic.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989670932699,"sku":"ATT-5358-P12-7","price":41.17,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-5358-p12-7_1__79866.1567601596.500.750.jpg?v=1785188067"},{"product_id":"attwood-5110-30-7-all-round-stern-navigation-light-30-inch-frosted-globe-pole-for-boats-up-to-39-4-ft","title":"Attwood 5110-30-7 30-Inch All-Round Frosted Globe Navigation Light, USCG Certified, Fits Boats up to 39.4 Feet","description":"\u003cp\u003eThe Attwood 5110-30-7 is a traditional-style all-round frosted globe navigation light built as a legacy replacement pole light for boats up to 39.4 feet (12 meters). It delivers a full 360 degrees of illumination and is USCG certified for 2-nautical-mile visibility, keeping a vessel legally compliant and clearly visible to other boaters after dark.\u003c\/p\u003e\u003cp\u003eThe light stands on a 30-inch aluminum pole finished in aluminum-silver, topped with a clear, frosted acrylic globe lens that diffuses the beam evenly around the horizon. It uses a 2-pin locking-collar base configuration, so it drops directly into standard 910R2, 910V2, and 910T2 light bases. With the locking collar removed, it also adapts to 2520, 911339, and 911370 bases, giving it broad compatibility across common attwood base styles already installed on a boat.\u003c\/p\u003e\u003cp\u003eAttwood ships the 5110-30-7 ready to install, including a 9-watt wedge-base incandescent lamp so it can be mounted and put back into service without a separate trip for a bulb. It runs on a standard 12-volt marine electrical system and is intended as a direct, no-assembly-required replacement for a worn or broken stern or all-round light pole.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5110-30-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Traditional All-Round Frosted Globe Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Length:\u003c\/strong\u003e 30 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Material:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Type:\u003c\/strong\u003e 2-Pin Locking-Collar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Light Bases:\u003c\/strong\u003e 910R2, 910V2, 910T2 (direct fit); 2520, 911339, 911370 (fits with locking collar removed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Acrylic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Clear (Frosted Globe)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e Incandescent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Included:\u003c\/strong\u003e Yes, 9-Watt Wedge-Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 9 Watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Range:\u003c\/strong\u003e 2 Nautical Miles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e USCG Certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e Up to 39.4 Feet (12 Meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9.81 x 39.06 x 5.62 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.7166 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Aluminum-Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697110305\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the Attwood 5110-30-7 designed for?\u003c\/strong\u003e This light is designed for boats up to 39.4 feet (12 meters) in length, with a 30-inch pole that elevates the light above obstructions for a clear line of sight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 5110-30-7 USCG certified?\u003c\/strong\u003e Yes, the Attwood 5110-30-7 is USCG certified for 2-nautical-mile visibility, meeting Coast Guard requirements for an all-round navigation light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this light come with a bulb?\u003c\/strong\u003e Yes, it ships with a 9-watt wedge-base incandescent lamp already included, so the 5110-30-7 can be installed without buying a bulb separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat light bases does the Attwood 5110-30-7 fit?\u003c\/strong\u003e It uses a 2-pin locking-collar pole configuration that fits directly into standard 910R2, 910V2, and 910T2 bases, and can also fit 2520, 911339, and 911370 bases once the locking collar is removed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pole made of?\u003c\/strong\u003e The 5110-30-7 has a 30-inch aluminum pole finished in an aluminum-silver color, paired with a clear frosted acrylic globe lens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many volts and watts does this light use?\u003c\/strong\u003e The Attwood 5110-30-7 operates on a standard 12-volt marine system and uses a 9-watt wedge-base bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 5110-30-7 weigh?\u003c\/strong\u003e The complete light and pole assembly weighs 0.7166 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this light?\u003c\/strong\u003e The Attwood 5110-30-7 measures 9.81 x 39.06 x 5.62 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs any assembly required to install the 5110-30-7?\u003c\/strong\u003e No, the light requires no assembly and is ready to install once it is set into a compatible base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of lens does the frosted globe light use?\u003c\/strong\u003e It has a clear acrylic lens with a frosted globe design that spreads 360-degree illumination evenly around the light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 5110-30-7 a good replacement for an older stern light?\u003c\/strong\u003e Yes, this Attwood light is built as a legacy replacement pole light, matching the traditional frosted globe style and 2-pin locking-collar base found on many existing boats.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989670965467,"sku":"ATT-5110-30-7","price":31.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/415QUqYt7aL.jpg?v=1784486887"},{"product_id":"attwood-5110-36-7-all-round-navigation-light-36-inch-frosted-globe-pole-uscg-2-mile-boats-to-39-4-ft","title":"Attwood 5110-36-7 36 Inch All-Round Frosted Globe Navigation Light, Fits Boats up to 39.4 Feet","description":"\u003cp\u003eThe Attwood 5110-36-7 is a 36-inch all-round navigation light built around a traditional frosted globe lens, designed to keep a boat legally visible from every direction after dark. It delivers full 360-degree illumination and is rated for 2-nautical-mile visibility, sized for boats up to 39.4 feet (12 m) in length. The 36-inch aluminum pole raises the light above deck hardware, rails, and other obstructions so the light maintains a clear line of sight from any angle, which is what the all-round visibility rating depends on.\u003c\/p\u003e\u003cp\u003eThe light uses a polycarbonate lens in a frosted, clear finish over an aluminum-silver pole, and it ships ready to install with a 9-watt wedge-base incandescent lamp already accounted for, so there is no separate bulb to source before mounting. Power draw is a standard 12 volts, matching typical small-boat electrical systems. The pole attaches through a 2-pin locking-collar configuration, which is a widely used mounting style on center consoles, fishing boats, pontoons, skiffs, and other small boats. It mates directly with 910R2, 910V2, and 911339\/911370 light bases, and can also be fitted to a 2520 base once the locking collar is removed. No assembly is required beyond mounting the pole into a compatible base and wiring it in, making it a straightforward legacy-style replacement for an aging or damaged all-round light.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5110-36-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Length:\u003c\/strong\u003e 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 10 x 39 x 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 9 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e Incandescent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Included:\u003c\/strong\u003e Yes, 9-watt wedge-base incandescent lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Clear (frosted globe)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Finish:\u003c\/strong\u003e Aluminum-silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Base Configuration:\u003c\/strong\u003e 2-pin locking collar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Light Bases:\u003c\/strong\u003e 910R2, 910V2, 911339, 911370 (direct fit); 2520 (fits with locking collar removed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Range:\u003c\/strong\u003e 2 nautical miles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Length Compatibility:\u003c\/strong\u003e Up to 39.4 feet (12 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697110367\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Warranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoats up to 39.4 feet (12 m) in length\u003c\/li\u003e\n\u003cli\u003eCenter console, fishing boat, pontoon, skiff, and other small boats\u003c\/li\u003e\n\u003cli\u003e910R2, 910V2, 911339, and 911370 light bases (direct fit)\u003c\/li\u003e\n\u003cli\u003e2520 light base (fits once the locking collar is removed)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Attwood 5110-36-7 designed for?\u003c\/strong\u003e The Attwood 5110-36-7 all-round light is designed for boats up to 39.4 feet (12 m) in length, with the 36-inch pole height ensuring proper elevation above deck obstructions for full line-of-sight visibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this light come with a bulb included?\u003c\/strong\u003e Yes, the Attwood 5110-36-7 ships with a 9-watt wedge-base incandescent lamp included, so it is ready to install without buying a separate bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat light bases is the 36-inch pole compatible with?\u003c\/strong\u003e The pole on the Attwood 5110-36-7 uses a 2-pin locking-collar configuration that fits directly into 910R2, 910V2, 911339, and 911370 light bases, and it can also be fitted to a 2520 base once the locking collar is removed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 5110-36-7 USCG certified?\u003c\/strong\u003e Yes, this all-round light is USCG certified for 2-nautical-mile visibility with full 360-degree illumination, meeting legal navigation light requirements for eligible boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of this light?\u003c\/strong\u003e The Attwood 5110-36-7 measures 10 x 39 x 5.5 inches with a 36-inch pole and weighs 1.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pole and lens made of?\u003c\/strong\u003e The 5110-36-7 uses an aluminum-silver finished pole with a polycarbonate lens in a clear, frosted globe design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and wattage does the Attwood 5110-36-7 run on?\u003c\/strong\u003e This light runs on a standard 12-volt marine electrical system and draws 9 watts through its included incandescent lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the pole attach to the light base?\u003c\/strong\u003e The Attwood 5110-36-7 pole mounts using a 2-pin locking-collar configuration, a common attachment style for all-round boat navigation lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this light a good fit for replacing an older or classic boat's navigation light?\u003c\/strong\u003e Yes, the 5110-36-7 is built as a legacy-style replacement light, making it a suitable swap for an aging all-round light on a classic boat using a compatible locking-collar base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the warranty on the Attwood 5110-36-7?\u003c\/strong\u003e The Attwood 5110-36-7 carries a 90-day manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 5110-36-7 require assembly?\u003c\/strong\u003e No, this light requires no assembly. It is ready to install once mounted into a compatible light base and wired in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the Attwood 5110-36-7?\u003c\/strong\u003e The package includes the complete 36-inch all-round light with aluminum pole, frosted globe polycarbonate lens, and the 9-watt wedge-base incandescent bulb already accounted for.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989671031003,"sku":"ATT-5110-36-7","price":36.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31LBIVhWTYL.jpg?v=1784486889"},{"product_id":"attwood-5122-08-7-all-round-navigation-light-8-fixed-base-360deg-white-2-mile-boats-to-39-4-ft","title":"Attwood 5122-08-7 All-Round Fixed Base Navigation Light, 8-Inch Aluminum Pole, Black Base","description":"\u003cp\u003eThe Attwood 5122-08-7 is an all-round fixed base navigation light built for boats up to 39.4 feet (12 meters) long. It mounts on an 8-inch bright anodized aluminum pole with a black composite base, making it a compact choice for a radar arch, bimini top on a pontoon boat, hard top, or other fixed structure on deck. The base measures 2.5 inches by 1 inch and secures to the boat structure using two #10 fasteners, which are not included.\u003c\/p\u003e\u003cp\u003eThis light uses a 20-watt incandescent bulb, which is included, paired with a white, frosted acrylic globe lens. Together they deliver 360-degree illumination visible for up to two miles, meeting the all-round visibility that boaters look for at the helm, on a radar arch, or on a tower structure. The globe style design gives even, wide-angle light distribution rather than a directional beam, which is why it is used as an all-round anchor or navigation light rather than a sidelight.\u003c\/p\u003e\u003cp\u003eOverall item dimensions are 3 x 2.5 x 11.75 inches, and the unit weighs 0.3646 pounds. The black composite base is durable and easy to install, and the light is intended to be simple to wire into an existing navigation light circuit. Attwood also offers this same globe-style, 8-inch aluminum pole light in an anti-glare version under a different part number for helm areas where reduced glare is a priority.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5122-08-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Style:\u003c\/strong\u003e All-Round (Globe Style)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Height:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Material:\u003c\/strong\u003e Bright anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Material:\u003c\/strong\u003e Black composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimensions:\u003c\/strong\u003e 2.5 inches x 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3 x 2.5 x 11.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3646 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e Incandescent (bulb included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 20 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e White (frosted globe)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Acrylic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility:\u003c\/strong\u003e 360 degrees, two-mile range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Boat Length:\u003c\/strong\u003e 39.4 feet (12 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Two #10 fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697122087\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor pleasure craft up to 39.4 feet (12 meters) in length\u003c\/li\u003e\n\u003cli\u003eSuitable for mounting on a radar arch, bimini top (including pontoon boats), hard top, or other fixed deck structure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Attwood 5122-08-7 rated for?\u003c\/strong\u003e The Attwood 5122-08-7 all-round navigation light is rated for pleasure craft up to 39.4 feet (12 meters) long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5122-08-7 come with a bulb?\u003c\/strong\u003e Yes, the Attwood 5122-08-7 includes its 20-watt incandescent bulb, so it is ready to wire in once mounted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware do I need to mount this light?\u003c\/strong\u003e Mounting the 5122-08-7 requires two #10 fasteners to secure the base to the boat structure; these fasteners are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the base of the 5122-08-7 made of?\u003c\/strong\u003e A black composite base holds the 8-inch anodized aluminum pole on the Attwood 5122-08-7, with the base measuring 2.5 inches by 1 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow tall is the pole on this light?\u003c\/strong\u003e The pole on the Attwood 5122-08-7 stands 8 inches and is made of bright anodized aluminum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far and how wide does the light shine?\u003c\/strong\u003e 360-degree, two-mile visibility is provided by the Attwood 5122-08-7, making it suitable for use as an all-round navigation light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and material is the lens?\u003c\/strong\u003e The 5122-08-7 uses a white, frosted acrylic globe lens for even, wide-angle illumination.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a directional or all-round light, and what is its wattage?\u003c\/strong\u003e The Attwood 5122-08-7 is an all-round (globe style) light running a 20-watt incandescent bulb, not a directional sidelight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a different version of this light without the standard globe lens?\u003c\/strong\u003e Attwood also makes an anti-glare version of this same 8-inch aluminum pole light under a separate part number, 5352-08-7, for installations where reduced glare at the helm is preferred; the 5122-08-7 is the standard globe-style version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 5122-08-7?\u003c\/strong\u003e Item dimensions for the Attwood 5122-08-7 are 3 x 2.5 x 11.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 5122-08-7 weigh?\u003c\/strong\u003e The Attwood 5122-08-7 weighs 0.3646 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can this light be installed on a boat?\u003c\/strong\u003e The 5122-08-7 is designed for mounting on a radar arch, a bimini top (including pontoon boats), a hard top, or another fixed deck structure.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989671162075,"sku":"ATT-5122-08-7","price":30.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-5122-08-7_lg__18870.1558113928.500.750.jpg?v=1785187999"},{"product_id":"attwood-5100-24-1-24-inch-all-round-navigation-pole-light-frosted-globe-white-2-nm-360-degree-visibility","title":"Attwood All-Round Pole Light, 24 Inch Frosted Globe Navigation Light, 5100-24-1","description":"\u003cp\u003eThe attwood 5100-24-1 is a 24 inch all-around navigation pole light built to provide 360-degree visibility from sunset to sunrise or in any period of poor visibility on the water. It uses an incandescent light source behind a frosted clear polycarbonate lens to deliver a 2 nautical mile, 360-degree visibility range, helping a vessel meet nighttime and low-light boating visibility needs. The pole itself is a 24 inch straight aluminum shaft, offering durable, corrosion-resistant construction while remaining lightweight. The removable design lets the pole be lifted out of its base for easy storage when the boat is not in use, reducing wear and freeing up deck space.\u003c\/p\u003e\u003cp\u003eThis light is designed around a two-pin base connection and is compatible with a two-pin light base, sold separately. It works with several attwood light bases, including the 910R2, 901V2, and 910T2 directly, and with the 2520, 911339, and 911370 bases once the locking collar is removed. The light operates on a 12 volt marine electrical system and is finished in white. It is intended as a replacement or upgrade for an existing all-around stern or mast light on a wide range of boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5100-24-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e All-Round Pole Navigation Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Length:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Material:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source Type:\u003c\/strong\u003e Incandescent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Frosted Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Range:\u003c\/strong\u003e 2 nautical miles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Angle:\u003c\/strong\u003e 360 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Compatibility:\u003c\/strong\u003e Two-pin light base (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Bases:\u003c\/strong\u003e 910R2, 901V2, 910T2, 2520, 911339, 911370 (locking collar removed on 2520, 911339, 911370)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Removable pole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Corrosion resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 24.88 x 3.9 x 2.09 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the visibility range of the attwood 5100-24-1 pole light?\u003c\/strong\u003e The attwood 5100-24-1 provides 2 nautical mile, 360-degree visibility, meeting nighttime and low-light boating visibility needs from any direction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the pole on this light?\u003c\/strong\u003e The pole on the 5100-24-1 measures 24 inches and is made of aluminum for durable, corrosion-resistant marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this light include a base?\u003c\/strong\u003e No, the 5100-24-1 is the pole and globe light only; it requires a compatible two-pin light base, which is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich attwood bases work with the 5100-24-1?\u003c\/strong\u003e This pole light is compatible with attwood bases 910R2, 901V2, and 910T2 directly, and with 2520, 911339, and 911370 once the locking collar is removed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the pole be removed for storage?\u003c\/strong\u003e Yes, the 5100-24-1 features a removable pole design that lifts out of its base, making it easy to store when the boat is not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of bulb does this navigation light use?\u003c\/strong\u003e The 5100-24-1 uses an incandescent light source behind a frosted clear polycarbonate lens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage system does this light run on?\u003c\/strong\u003e The attwood 5100-24-1 is designed for 12 volt marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 5100-24-1 pole corrosion resistant?\u003c\/strong\u003e Yes, the aluminum pole on the 5100-24-1 is built with corrosion-resistant construction for long-term marine exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the lens on this light?\u003c\/strong\u003e The lens on the attwood 5100-24-1 is a frosted clear polycarbonate lens, with a white finish on the overall unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 5100-24-1 weigh?\u003c\/strong\u003e The attwood 5100-24-1 weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs any assembly required for this light?\u003c\/strong\u003e No, the 5100-24-1 does not require assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this light typically used for?\u003c\/strong\u003e The 5100-24-1 is used as an all-around stern or mast navigation light, providing required visibility for safe nighttime or low-visibility boat operation.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989671489755,"sku":"ATT-5100-24-1","price":47.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31IIjDXia1L.jpg?v=1784486923"},{"product_id":"attwood-5530-24a7-lightarmor-24-inch-led-all-round-articulating-pole-navigation-light-uscg-2-mile-360-degree-stern-light","title":"Attwood 5530-24A7 LightArmor 24-Inch LED All-Round Navigation Light, USCG Certified","description":"\u003cp\u003eThe Attwood 5530-24A7 is a 24-inch LED all-round navigation light built for boats up to 39.4 feet. Fully USCG certified, it delivers 2-mile, 360-degree visibility so you stay safe and legally compliant after dark. The 24-inch anodized aluminum pole is sized to clear outboard motors and bimini tops, and an aftermarket dual locking collar lets it drop securely into a standard 2-pin light base without extra hardware.\u003c\/p\u003e\u003cp\u003eElectronics are shockproof, corrosion-resistant, and waterproof for long-term use in harsh marine environments, and the light includes condensation and anti-glare management to help preserve your night vision on the water. It runs on a 12-volt DC system with an operating range of 10.5 to 14.4 volts DC and draws 3 watts. The lens is clear plastic and the pole finish is aluminum-silver. Attwood backs the 5530-24A7 with a 5-year warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5530-24A7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697553027\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e LED All-Round Navigation Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Length:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Material:\u003c\/strong\u003e Anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Aluminum-Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Range:\u003c\/strong\u003e 2 nautical miles, 360 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Length Compatibility:\u003c\/strong\u003e Up to 39.4 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e USCG certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage Range:\u003c\/strong\u003e 10.5 to 14.4 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 3 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e 2-pin light base with dual locking collar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6041 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Height:\u003c\/strong\u003e 67.31 centimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Length:\u003c\/strong\u003e 5.715 centimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Width:\u003c\/strong\u003e 7.62 centimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Weight:\u003c\/strong\u003e 0.136 kilograms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5-year warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in China\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Attwood 5530-24A7 navigation light do?\u003c\/strong\u003e The Attwood 5530-24A7 is an all-round LED navigation light that provides 2-mile, 360-degree visibility and is USCG certified for boats up to 39.4 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 5530-24A7 light USCG certified?\u003c\/strong\u003e Yes, the Attwood 5530-24A7 is fully USCG certified for 2-mile, 360-degree visibility, keeping you legally compliant after dark.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow tall is the pole on this light?\u003c\/strong\u003e The Attwood 5530-24A7 has a 24-inch anodized aluminum pole, sized to clear outboard motors and bimini tops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the 5530-24A7 rated for?\u003c\/strong\u003e This light is rated for boats up to 39.4 feet as part of its USCG certification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of base does the light mount to?\u003c\/strong\u003e The 5530-24A7 mounts into a standard 2-pin light base using its dual locking collar for a secure, hassle-free fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 5530-24A7 run on?\u003c\/strong\u003e It operates on a 12-volt DC system, with a functional range of 10.5 to 14.4 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much power does the light draw?\u003c\/strong\u003e The Attwood 5530-24A7 draws 3 watts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the light waterproof and corrosion resistant?\u003c\/strong\u003e Yes, the 5530-24A7 features shockproof, corrosion-resistant, waterproof electronics built for harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the light have anti-glare or anti-fogging features?\u003c\/strong\u003e The Attwood 5530-24A7 includes condensation and anti-glare management designed to preserve your night vision.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this light?\u003c\/strong\u003e Attwood backs the 5530-24A7 with a 5-year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of?\u003c\/strong\u003e The 5530-24A7 uses a clear plastic lens set in an aluminum-silver finished pole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 5530-24A7 weigh?\u003c\/strong\u003e The Attwood 5530-24A7 has a product weight of 0.6041 pounds.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989671522523,"sku":"ATT-5530-24A7","price":61.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/412WGzoABqL.jpg?v=1784486925"},{"product_id":"attwood-5530-36a7-lightarmor-36-inch-led-all-round-articulating-pole-navigation-light-uscg-2-mile-360deg-stern-light","title":"Attwood 5530-36A7 36-Inch LED All-Round Navigation Light, USCG Certified for Boats up to 39.4 Feet","description":"\u003cp\u003eThe Attwood 5530-36A7 is a 36-inch LED all-round navigation light built to provide 2-mile, 360-degree visibility on boats up to 39.4 feet, and it is fully USCG certified for legal compliance on the water. The extended 36-inch anodized aluminum pole gives the light enough height to clear outboard motors and bimini tops, while a dual locking collar secures the light into standard 2-pin light bases for a stable, hassle-free fit.\u003c\/p\u003e\u003cp\u003eBuilt for harsh marine environments, the 5530-36A7 features shockproof, corrosion-resistant, and waterproof electronics, along with condensation management and anti-glare control to help preserve night vision at the helm. The light operates on 10.5V to 14.4V DC and is backed by a 5-year warranty. The lens is clear plastic and the pole finish is aluminum-silver. This is a single-light unit with no assembly required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5530-36A7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e LED All-Round Navigation Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Length:\u003c\/strong\u003e 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Range:\u003c\/strong\u003e 2 miles, 360 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Length Rating:\u003c\/strong\u003e Up to 39.4 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e USCG certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 10.5V to 14.4V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 3 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Aluminum-Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Material:\u003c\/strong\u003e Anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Dual locking collar, fits standard 2-pin light bases\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Features:\u003c\/strong\u003e Waterproof, shockproof, corrosion-resistant, condensation management, anti-glare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 108.204 cm x 7.747 cm x 5.334 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the visibility range of the Attwood 5530-36A7?\u003c\/strong\u003e The 5530-36A7 provides 2-mile, 360-degree visibility and is fully USCG certified for boats up to 39.4 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow tall is the pole on this light?\u003c\/strong\u003e The pole measures 36 inches and is made of anodized aluminum, giving enough height to clear outboard motors and bimini tops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 5530-36A7 run on?\u003c\/strong\u003e It operates on 10.5V to 14.4V DC, matching standard 12-volt boat electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 5530-36A7 waterproof?\u003c\/strong\u003e Yes, the electronics are shockproof, corrosion-resistant, and waterproof, with condensation management and anti-glare control to protect night vision.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the light mount to my boat?\u003c\/strong\u003e A dual locking collar on the 5530-36A7 secures it into standard 2-pin light bases for a stable fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of?\u003c\/strong\u003e The 5530-36A7 uses a clear plastic lens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the warranty on this light?\u003c\/strong\u003e Attwood backs the 5530-36A7 with a 5-year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 5530-36A7 weigh?\u003c\/strong\u003e The light weighs 0.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5530-36A7 require assembly?\u003c\/strong\u003e No, the light ships ready to install with no assembly required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the pole and housing?\u003c\/strong\u003e The 5530-36A7 has an aluminum-silver finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this light USCG certified?\u003c\/strong\u003e Yes, the 5530-36A7 is fully USCG certified for 2-mile, 360-degree visibility on boats up to 39.4 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is this light rated for?\u003c\/strong\u003e The 5530-36A7 is rated for boats up to 39.4 feet.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989671588059,"sku":"ATT-5530-36A7","price":64.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/316sGguA46L.jpg?v=1784486926"},{"product_id":"attwood-5580a7-all-round-deck-mount-led-navigation-light-12v-dc-6-inch-leads-with-bayonet-lock-base","title":"Attwood 5580A7 All-Round Deck Mounted Light, 6-inch Wire Leads, Bayonet Mount, 12-Volt DC","description":"\u003cp\u003eThe Attwood 5580A7 is an all-round deck mounted light built for 12-volt DC boat electrical systems. It uses a bayonet lock mounting design, allowing the light lens\/bulb assembly to be twisted into place and removed for bulb access or replacement without tools. This variant is equipped with 6-inch wire leads for connecting directly to the boat's 12-volt DC power supply, making it suited for installations where the wiring run to the base is short. As an all-round light, it is intended for deck mounting applications on boats requiring 360-degree visibility. The 5580A7 is part of the Attwood deck light family, which also includes versions with longer wire leads and a separate replacement base, so boat owners can match the exact lead length and mounting configuration their installation requires. Weighing 0.3333 pounds, it is a lightweight fixture suited for typical deck and rail mounting locations. Buyers replacing an existing Attwood all-round light or wiring a new deck light installation can use the 6-inch lead length and bayonet mount as key identifiers to confirm this is the correct part number for their setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5580A7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e All-Round Deck Mounted Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Lead Length:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Bayonet lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 12-volt DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3333 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697055873\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the wire lead length on the Attwood 5580A7?\u003c\/strong\u003e The Attwood 5580A7 comes with 6-inch wire leads for connecting to the boat's 12-volt DC power supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 5580A7 mount to its base?\u003c\/strong\u003e It uses a bayonet lock mounting system, so the light twists into place on the base and can be removed by turning it, without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Attwood 5580A7 run on?\u003c\/strong\u003e It is designed for 12-volt DC boat electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 5580A7 weigh?\u003c\/strong\u003e The 5580A7 weighs 0.3333 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 5580A7 an all-round or a sidelight?\u003c\/strong\u003e The 5580A7 is an all-round deck mounted light, providing 360-degree visibility rather than a directional sidelight beam.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5580A7 include a mounting base?\u003c\/strong\u003e The 5580A7 is the light fixture with 6-inch leads and bayonet mount; a separate replacement base is available under a different Attwood part number for those who need a base only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre longer wire lead versions of this light available?\u003c\/strong\u003e Yes, Attwood offers this same all-round deck light with longer wire lead options under different part numbers for installations that need a longer run to the power supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 5580A7 replace an existing Attwood deck light with a bayonet mount?\u003c\/strong\u003e Yes, the 5580A7 uses the same bayonet lock mounting method, so it is suited to replace an existing Attwood all-round light with a compatible bayonet base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when ordering the Attwood 5580A7?\u003c\/strong\u003e Ordering the 5580A7 gets you the all-round deck mounted light with its 6-inch wire leads and bayonet-lock light assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 5580A7 genuine Attwood or aftermarket?\u003c\/strong\u003e The 5580A7 is a genuine Attwood part, identified by its manufacturer part number 5580A7.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989671719131,"sku":"ATT-5580A7","price":58.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ATT-5580A7-Round-Light-1__52809.1739477319.500.750.jpg?v=1785329070"},{"product_id":"attwood-6356d7-round-flush-transom-stern-light-3-inch-12v-2-nm-visibility-for-boats","title":"Attwood 6356D7 Round Flush Mount Transom Light, 3 Inch Diameter, 12 Volt, Silver","description":"\u003cp\u003eThe Attwood 6356D7 is a round, flush-mount transom light built for stern navigation and courtesy lighting on boats. It installs vertically into a 3-inch diameter opening for a clean, low-profile finish that sits nearly flush with the transom surface, avoiding the snag hazard of a surface-mounted fixture. The light runs on a 12-volt system and ships with a 7.5-watt incandescent lamp already installed, so it is ready to wire in without sourcing a separate bulb.\u003c\/p\u003e\u003cp\u003eOnce mounted, the 6356D7 throws light across a 135-degree radius, giving a 2 nautical mile range of visibility to help other vessels see your boat's position from sunset to sunrise or in low-visibility conditions. Beyond stern navigation duty, the fixture also works as an interior or cockpit courtesy light wherever a small, watertight round light is useful. The housing is finished in silver with a clear plastic lens, and the assembly is built with watertight construction to resist corrosion in a marine environment. Mounting hardware is included in the form of two number 10 stainless steel screws, so no separate hardware purchase is needed for a standard installation. Attwood has manufactured marine lighting, fuel systems, water systems, and related boating accessories for over 100 years, and the 6356D7 is part of that lighting lineup, designed for straightforward installation and low-maintenance operation once in place.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6356D7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Flush mount, vertical installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Range:\u003c\/strong\u003e 2 nautical miles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam Angle:\u003c\/strong\u003e 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb:\u003c\/strong\u003e 7.5 watt incandescent lamp, included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Color:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Two #10 stainless steel screws included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6.25 x 17.25 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2765 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697635631\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eATT6356D7\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole does the Attwood 6356D7 transom light require?\u003c\/strong\u003e The Attwood 6356D7 is a round fixture with a 3-inch diameter, so it flush-mounts into a 3-inch diameter opening in the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 6356D7 mounted flush or does it sit on the surface?\u003c\/strong\u003e It is a flush-mount, vertical-installation transom light, so the housing sits nearly flush with the mounting surface rather than protruding above it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this light run on?\u003c\/strong\u003e The Attwood 6356D7 operates on a 12-volt system, standard for most boat electrical setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 6356D7 come with a bulb?\u003c\/strong\u003e Yes, a 7.5-watt incandescent lamp is included and installed, so the 6356D7 is ready to wire in without buying a separate bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far can other boats see this light at night?\u003c\/strong\u003e The 6356D7 provides a 2 nautical mile range of visibility across a 135-degree radius, which is the coverage needed for stern navigation lighting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 6356D7 be used anywhere besides the transom?\u003c\/strong\u003e Yes, beyond stern navigation duty, the round housing also works well as an interior or cockpit courtesy light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of and what color is it?\u003c\/strong\u003e The 6356D7 uses a clear plastic lens over a silver-finished housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with the 6356D7?\u003c\/strong\u003e Yes, two #10 stainless steel screws are included for mounting the 6356D7.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 6356D7 weigh?\u003c\/strong\u003e The 6356D7 weighs 0.2765 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 6356D7 watertight?\u003c\/strong\u003e Yes, the 6356D7 has watertight construction designed to withstand corrosion in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 6356D7?\u003c\/strong\u003e The Attwood 6356D7 transom light carries UPC 022697635631.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an OEM Attwood part or an aftermarket copy?\u003c\/strong\u003e The 6356D7 is a genuine Attwood part, identified by Attwood's own manufacturer part number 6356D7 (also referenced as ATT6356D7).\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989672308955,"sku":"ATT-6356D7","price":25.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6356D7__76317.1722348837.500.750.jpg?v=1785188207"},{"product_id":"attwood-6724-05-1-replacement-globe-for-all-round-navigation-lights-white-screw-on-lens-6700-series-fits-4900-5400-5401","title":"Attwood Replacement Navigation Light Globe 6724-05-1 for Early Attwood Models 4900, 5400, 5401 - White","description":"\u003cp\u003eThe Attwood 6724-05-1 is a translucent white replacement globe for Early Attwood navigation light models 4900, 5400, and 5401. It is designed to screw on in place of a cracked, damaged, or yellowed globe, restoring the 360 degree white light pattern used on aft navigation light poles. The globe is made of translucent white plastic, giving it the durability to hold up to sun exposure and marine conditions while diffusing light evenly around the pole.\u003c\/p\u003e\u003cp\u003eThis is a replacement part only; the light pole itself is sold separately. Each order includes one globe. Installation is straightforward, requiring no tools or assembly, and the globe threads directly onto the compatible Attwood light housing. Because it is sized and threaded to match specific Early Attwood models, buyers should confirm their pole light model number before ordering to ensure a proper fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6724-05-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 5 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2 x 2 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.0415 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Models:\u003c\/strong\u003e Early Attwood models 4900, 5400, 5401\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697672414\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e ATT6724051\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eEarly Attwood models: 4900, 5400, 5401\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eATT6724051\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat models does the Attwood 6724-05-1 globe fit?\u003c\/strong\u003e The Attwood 6724-05-1 globe fits Early Attwood navigation light models 4900, 5400, and 5401.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the light pole included with this globe?\u003c\/strong\u003e No, the pole light itself is sold separately; the 6724-05-1 is the replacement globe only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 6724-05-1 globe?\u003c\/strong\u003e It is white, made of translucent plastic that diffuses light around the full 360 degrees of the pole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 6724-05-1 made of?\u003c\/strong\u003e The globe is made of translucent white plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many globes come in one order?\u003c\/strong\u003e Each order of the Attwood 6724-05-1 includes one replacement globe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the OEM equivalent part number for this globe?\u003c\/strong\u003e The OEM equivalent part number for the Attwood 6724-05-1 globe is ATT6724051.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 6724-05-1 globe?\u003c\/strong\u003e The globe measures 2 x 2 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 6724-05-1 globe weigh?\u003c\/strong\u003e It weighs 0.0415 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 6724-05-1 globe require tools to install?\u003c\/strong\u003e No, the Attwood 6724-05-1 is designed to screw on directly, with no tools or assembly required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and wattage is the light this globe is used with?\u003c\/strong\u003e The associated navigation light housing operates at 12 Volts DC with a 5 watt bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace this globe?\u003c\/strong\u003e The 6724-05-1 globe is used to replace a globe that has become cracked, damaged, or yellowed on Early Attwood models 4900, 5400, and 5401.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Attwood part?\u003c\/strong\u003e Yes, the 6724-05-1 is a genuine Attwood replacement globe, part number 6724-05-1.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989673685211,"sku":"ATT-6724-05-1","price":7.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Attwood_Frosted_Globe__15242.1722507801.500.750.jpg?v=1785188588"},{"product_id":"attwood-7571l7-pole-light-storage-clip-holds-3-4-in-diameter-light-poles-black","title":"Attwood 7571L7 Pole Light Storage Clip, Fits 3\/4-Inch Diameter Poles","description":"\u003cp\u003eThe Attwood 7571L7 is a compact storage clip designed to hold a boat's light pole securely in place whenever the light is not in use. Rather than letting a removable pole light roll around loose or take up hand space, this clip mounts to a flat surface and grips the pole so it stays put and out of the way. It is a common fit in areas such as engine wells and lockers, where a dedicated, out-of-sight storage spot for the pole keeps the deck clear and the pole protected from damage.\u003c\/p\u003e\u003cp\u003eThe clip itself is built from durable black plastic paired with a resilient black rubber insert that flexes to grip the pole and cushion it against vibration and rattling while underway. It is sized to reliably hold 3\/4-inch-diameter poles, matching the standard diameter used by most removable boat light poles. The clip measures 2 inches long by 1 1\/2 inches high, making it small enough to tuck into a locker or engine well without getting in the way of other gear.\u003c\/p\u003e\u003cp\u003eMounting is straightforward: the clip installs with a single #8 fastener and is furnished with a nickel-plated brass finishing washer for a clean, finished look at the mounting point. Because it uses only one screw, installation and removal are quick, and the clip can be positioned wherever it best suits the boat's layout.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7571L7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Pole Light Storage Clip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Pole Diameter:\u003c\/strong\u003e 0.75 inches (3\/4 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClip Dimensions:\u003c\/strong\u003e 2 inches L x 1.5 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaged Dimensions:\u003c\/strong\u003e 6 x 3 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass, Plastic, Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e 1 #8 screw (included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Finish:\u003c\/strong\u003e Nickel-plated brass finishing washer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1167 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697757135\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 7571L7 used for?\u003c\/strong\u003e The Attwood 7571L7 is a storage clip that holds a boat's removable light pole securely in place when the light is not in use, commonly mounted in an engine well or locker.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size pole does the 7571L7 clip fit?\u003c\/strong\u003e It is sized for 3\/4-inch-diameter poles (0.75 inches), the standard diameter used by most removable boat light poles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 7571L7 clip made from?\u003c\/strong\u003e The clip body is black plastic with a resilient black rubber insert that grips the pole, and the mounting hardware includes a nickel-plated brass finishing washer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 7571L7 pole light clip mounted?\u003c\/strong\u003e It installs with a single #8 fastener, which is furnished along with a nickel-plated brass finishing washer for a finished look at the mounting point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Attwood 7571L7?\u003c\/strong\u003e The clip itself measures 2 inches long by 1.5 inches high; the packaged item measures 6 x 3 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 7571L7 weigh?\u003c\/strong\u003e The Attwood 7571L7 pole light storage clip weighs 0.1167 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can the 7571L7 clip be installed on a boat?\u003c\/strong\u003e Common installation locations include engine wells and lockers, anywhere a flat surface is available to mount the clip and stow the light pole out of the way.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 7571L7 come with mounting hardware?\u003c\/strong\u003e Yes, it is furnished with 1 #8 fastener and a nickel-plated brass finishing washer, so no separate hardware purchase is needed for a single-point mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 7571L7 clip a universal fit for any light pole?\u003c\/strong\u003e It is designed to hold 3\/4-inch-diameter poles specifically, so it will not securely grip poles of a different diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Attwood 7571L7 clip?\u003c\/strong\u003e The clip is black, made from black plastic with a black rubber grip insert.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the clip require more than one fastener to install?\u003c\/strong\u003e No, the Attwood 7571L7 installs with a single #8 screw, which is included with the finishing washer.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989673881819,"sku":"ATT-7571L7","price":6.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-7571l7_large__12158.1558178045.500.750.jpg?v=1785188531"},{"product_id":"attwood-7202-p-7-lightarmor-20-inch-folding-masthead-anchor-light-12v-incandescent-3-nm-360-degree-silver-aluminum-pole","title":"Attwood 7202-P-7 Folding 20 Inch Masthead\/Anchor Light, 12-Volt Aluminum Pole, 3 Nautical Mile Visibility","description":"\u003cp\u003eThe Attwood 7202-P-7 is a 12-volt folding masthead\/anchor light built around a 20 inch aluminum pole, designed to give boaters reliable navigation lighting from sunset to sunrise or whenever visibility is poor. The incandescent lamp delivers 3 nautical mile visibility across a full 360 degree radius, meeting the range and arc that boaters rely on for anchor and masthead signaling. The folding aluminum pole design allows the light to be raised for maximum visibility while underway or at anchor, then folded down for storage, transport, or when the light is not in use, helping protect the pole and lens from damage.\u003c\/p\u003e\u003cp\u003eConstruction is watertight to resist corrosion in both freshwater and saltwater environments, making this light suitable for a wide range of boating venues. The lens is clear polycarbonate, chosen for its impact resistance and light transmission, and the light operates on a 12 volt, 12 watt incandescent bulb. The finish is silver. This is a complete, ready-to-install unit intended as a direct fit for boats already equipped with an Attwood 7202-P-7 masthead\/anchor light, and it is also available in other pole heights and mounting styles for different vessel configurations.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7202-P-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Masthead Light - Fold Down 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 12 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source Type:\u003c\/strong\u003e Incandescent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Range:\u003c\/strong\u003e 3 nautical miles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam Angle:\u003c\/strong\u003e 360 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Length:\u003c\/strong\u003e 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Material:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Style:\u003c\/strong\u003e Folding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 25 x 5 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8725 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Watertight construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Freshwater and saltwater\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow far can the Attwood 7202-P-7 masthead light be seen?\u003c\/strong\u003e The Attwood 7202-P-7 provides 3 nautical mile visibility across a full 360 degree radius, making it suitable as a masthead or anchor light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 7202-P-7 a 12-volt light?\u003c\/strong\u003e Yes, the Attwood 7202-P-7 masthead\/anchor light operates on 12 volts and uses a 12 watt incandescent bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow tall is the pole on this light?\u003c\/strong\u003e The 7202-P-7 has a 20 inch aluminum pole that raises the light for greater visibility while underway or at anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 7202-P-7 fold down for storage?\u003c\/strong\u003e Yes, this is a folding masthead\/anchor light, so the 20 inch aluminum pole can be folded down when not in use for easier storage and transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the lens made from?\u003c\/strong\u003e The lens on the Attwood 7202-P-7 is clear polycarbonate, chosen for impact resistance and light output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this light be used in saltwater?\u003c\/strong\u003e Yes, the Attwood 7202-P-7 has watertight construction designed to withstand corrosion and is suitable for both freshwater and saltwater venues.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Attwood 7202-P-7?\u003c\/strong\u003e The 7202-P-7 masthead\/anchor light has a silver finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 7202-P-7 and the 12 inch version?\u003c\/strong\u003e The 7202-P-7 uses a 20 inch aluminum pole, while Attwood also offers a 12 inch aluminum pole version for boats that need a shorter mast light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of bulb does the 7202-P-7 use?\u003c\/strong\u003e The Attwood 7202-P-7 uses a 12 volt, 12 watt incandescent bulb as its light source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 7202-P-7 weigh?\u003c\/strong\u003e The Attwood 7202-P-7 masthead\/anchor light weighs 0.8725 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 7202-P-7?\u003c\/strong\u003e The Attwood 7202-P-7 measures approximately 25 x 5 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs assembly required for the 7202-P-7?\u003c\/strong\u003e No, the Attwood 7202-P-7 does not require assembly and is ready to install as a complete unit.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989673914587,"sku":"ATT-7202-P-7","price":75.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-7202-7_lg__69208.1591023431.500.750.jpg?v=1785188410"},{"product_id":"attwood-led-anchor-and-masthead-light-12-pole-2nm-360-degree-navigation-light-for-boats-up-to-39-4-ft-12v","title":"Attwood LED Anchor and Masthead Light, 12 Volt, 2-Mile Visibility, Fits Boats up to 39.4 Feet","description":"\u003cp\u003eThe Attwood LED Anchor and Masthead Light (part number 7812-S-7) is a compact 12-volt navigation light built for boats up to 39.4 feet (12 meters), delivering two-mile, 360-degree light visibility to meet nighttime and anchor-light needs. Its small footprint makes it well suited for mounting on a radar arch, hard top, poling platform, tuna tower, or other fixed structure, and the light mounts flush to the surface it is installed on, making it a practical choice for the tow piece atop a ski or wakeboard boat tower.\u003c\/p\u003e\u003cp\u003eThe light runs on an 8-watt wedge base lamp and connects to a 12 VDC power supply using 7-inch leads. A twist\/bayonet lock secures the lens and cover to the base, allowing the lamp to be replaced without special tools. The unit installs directly to the deck using two #10 fasteners, and the mounting pole measures 12 inches long. The lens is glass with a clear finish, and the housing is black. Some assembly is required at installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7812-S-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e LED Anchor and Masthead Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 8 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Visibility:\u003c\/strong\u003e Two-mile, 360-degree visibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Length Rating:\u003c\/strong\u003e Up to 39.4 feet (12 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLamp Included:\u003c\/strong\u003e 8-watt wedge base lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Leads:\u003c\/strong\u003e 7 inches, for 12 VDC connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Glass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Length:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 17 inches high x 2.87 inches wide x 5.25 inches deep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Two #10 fasteners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Flush deck mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock Style:\u003c\/strong\u003e Twist\/bayonet lock (lens and cover to base)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Vehicle Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.125 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 7812-S-7 light used for?\u003c\/strong\u003e The Attwood 7812-S-7 is an LED anchor and masthead light that provides two-mile, 360-degree visibility, intended for anchor and navigation use on boats up to 39.4 feet (12 meters).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 7812-S-7 mount to the boat?\u003c\/strong\u003e It installs directly to the deck using two #10 fasteners and mounts flush to the surface, which makes it a good fit on a radar arch, hard top, poling platform, tuna tower, or the tow piece of a ski or wakeboard boat tower.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does this light require?\u003c\/strong\u003e The 7812-S-7 connects to a 12 VDC power supply using its 7-inch leads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat lamp does the Attwood anchor light use?\u003c\/strong\u003e It includes an 8-watt wedge base lamp, and the twist\/bayonet lock on the lens and cover makes lamp replacement straightforward.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far can the 7812-S-7 be seen from?\u003c\/strong\u003e The light offers two-mile, 360-degree visibility, suitable for boats up to 39.4 feet (12 meters) in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this light?\u003c\/strong\u003e The Attwood 7812-S-7 has a package size of 17 inches high by 2.87 inches wide by 5.25 inches deep, with a 12-inch mounting pole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of?\u003c\/strong\u003e The lens on the 7812-S-7 is glass with a clear finish, secured to the base with a twist\/bayonet lock along with the cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Attwood 7812-S-7?\u003c\/strong\u003e This anchor and masthead light has a black housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 7812-S-7 require assembly?\u003c\/strong\u003e Yes, some assembly is required when installing the Attwood 7812-S-7.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 7812-S-7 weigh?\u003c\/strong\u003e The Attwood 7812-S-7 anchor and masthead light weighs 1.125 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting hardware is included?\u003c\/strong\u003e Two #10 fasteners are used to install the 7812-S-7 directly to the deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 7812-S-7 a universal fit for boats?\u003c\/strong\u003e Yes, the Attwood 7812-S-7 is a universal fit light rated for boats up to 39.4 feet (12 meters).\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989674143963,"sku":"ATT-7812-S-7","price":126.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7812-S-7__86974.1737883957.500.750.jpg?v=1785188508"},{"product_id":"attwood-7201-p-7-lightarmor-fold-down-anchor-masthead-all-round-navigation-light-12-inch-12v-black-composite-base","title":"Attwood 7201-P-7 Fold-Down Incandescent Anchor\/Masthead Navigation Light, 12 Inch Aluminum Pole, Black Composite Base","description":"\u003cp\u003eThe Attwood 7201-P-7 is a fold-down anchor\/masthead navigation light built around Attwood's LightArmor fold-down base. The light mounts on a 12-inch bright anodized aluminum pole and folds forward or back for easy stowage, with single-handed cam-lock operation for quick raising and lowering. The black composite base is designed for vertical mounting and includes a rail adaptor, making it straightforward to install on boats up to 20 meters (65.6 feet) in length.\u003c\/p\u003e\u003cp\u003eThe fixture uses an incandescent bulb and produces a white light with 360-degree visibility, and an anti-glare lens helps preserve night vision while underway. The pole, electronics, and cam-lock mechanism are built to resist shock, corrosion, and water exposure for reliable use in a marine environment. This is the 12-inch pole version of Attwood's All-Round Fold-Down Navigation Light line; the same line is also offered with a 20-inch pole (7202-P-7) and in a vertical-mount variant (7201-PV-7), which are separate part numbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7201-P-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source Type:\u003c\/strong\u003e Incandescent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 8 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility:\u003c\/strong\u003e 2 miles, 360 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Length:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Material:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Vertical mounted, with rail adaptor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Acrylic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Length Compatibility:\u003c\/strong\u003e Up to 20 meters \/ 65.6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 17 x 5 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.705 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for boats up to 20 meters (65.6 feet) in length; no make, model, or engine-specific fitment applies.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 7201-P-7?\u003c\/strong\u003e It is a fold-down anchor\/masthead navigation light with a 12-inch aluminum pole and a black composite base built on Attwood's LightArmor fold-down base system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the 7201-P-7 designed for?\u003c\/strong\u003e The 7201-P-7 is designed for boats up to 20 meters, or 65.6 feet, in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the light fold down for storage?\u003c\/strong\u003e Yes, the 7201-P-7's LightArmor base folds forward or back and uses a single-handed cam-lock for quick, easy operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 7201-P-7 mounted?\u003c\/strong\u003e The 7201-P-7 uses a vertical mounted, black composite base that includes a rail adaptor for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of bulb does the 7201-P-7 use?\u003c\/strong\u003e The Attwood 7201-P-7 uses an incandescent 12-volt, 8-watt bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the visibility range of this navigation light?\u003c\/strong\u003e The 7201-P-7 provides 360-degree white light visibility out to 2 miles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the pole on the 7201-P-7?\u003c\/strong\u003e The pole is 12 inches long and made of bright anodized aluminum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the base and lens?\u003c\/strong\u003e The 7201-P-7 has a black composite base with a white acrylic lens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 7201-P-7 weigh?\u003c\/strong\u003e The Attwood 7201-P-7 weighs 0.705 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 7201-P-7 waterproof?\u003c\/strong\u003e Yes, the 7201-P-7's electronics and cam-lock mechanism are built to resist shock, corrosion, and water exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 7201-P-7 different from the 7202-P-7?\u003c\/strong\u003e The 7201-P-7 has a 12-inch aluminum pole, while the 7202-P-7 is the same light line with a 20-inch pole; they are separate part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 7201-P-7 include batteries?\u003c\/strong\u003e No, the 7201-P-7 does not include batteries.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989674471643,"sku":"ATT-7201-P-7","price":65.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-7201-7__66510.1558181358.500.750.jpg?v=1785188380"},{"product_id":"attwood-7100b7-telescoping-pole-light-with-zamak-base-36-in-2-mile-360-degree-all-round-navigation-light","title":"Attwood 7100B7 Stowaway Pole Light with Plug-In Base, 36 Inch, 2-Mile USCG Compliant","description":"\u003cp\u003eThe Attwood 7100B7 is a stowaway stern pole light built around a plug-in flush-mount base, giving boaters a USCG-compliant navigation light that stows away cleanly when not in use. The kit centers on a 36-inch, 2-pin pole paired with the required 911339 flush-mount base and a 9-watt wedge-base incandescent lamp, so it is set up as a complete lighting solution rather than a bare pole. Illumination is rated for 2 nautical miles of visibility across a full 360-degree circle, meeting the needs of boats up to 39.4 feet (12 meters) in length.\u003c\/p\u003e\u003cp\u003eThe flush-mount base is a low-profile design that extends only 3 inches below the deck surface, keeping the footprint compact at 4 inches long by 1-5\/8 inches wide. It mounts through three countersunk holes sized for #10 fasteners, and its integrated swivel cover shields the interior socket from water, dirt, and debris whenever the pole is removed or stowed. The lens is polycarbonate in a beige tone, set into an aluminum-silver finished housing, giving the assembly a durable, corrosion-resistant profile for regular exposure to marine conditions.\u003c\/p\u003e\u003cp\u003eAs a genuine legacy replacement part, the 7100B7 is intended as a straightforward drop-in solution to restore or replace an existing plug-in style stern light setup without requiring major modifications to the deck or wiring.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7100B7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Length:\u003c\/strong\u003e 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Type:\u003c\/strong\u003e Plug-in flush-mount base (Part 911339)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Range:\u003c\/strong\u003e 2 nautical miles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIllumination Pattern:\u003c\/strong\u003e 360 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Length Compatibility:\u003c\/strong\u003e Up to 39.4 feet (12 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e Incandescent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLamp:\u003c\/strong\u003e 9-watt wedge-base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Aluminum - Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Beige\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimensions:\u003c\/strong\u003e 4 inches L x 1-5\/8 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelow-Deck Clearance Required:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Three countersunk holes for #10 fasteners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9.81 x 39 x 5.62 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.0313 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697710086\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e USCG compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBoats up to 39.4 feet (12 meters) in length\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers listed\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pole length on the Attwood 7100B7?\u003c\/strong\u003e The Attwood 7100B7 uses a 36-inch, 2-pin pole as part of its plug-in stowaway lighting kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far can this light be seen from?\u003c\/strong\u003e The 7100B7 provides 360-degree illumination visible from 2 nautical miles away, meeting USCG requirements for boats up to 39.4 feet (12 meters) in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 7100B7 include the mounting base?\u003c\/strong\u003e Yes, the kit is built around the required 911339 flush-mount base along with the 36-inch pole and a 9-watt wedge-base lamp, so it installs as a complete plug-in lighting setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fasteners does the base require?\u003c\/strong\u003e The flush-mount base on part number 7100B7 has three countersunk holes sized for #10 fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much clearance is needed below deck?\u003c\/strong\u003e The 7100B7's plug-in base extends 3 inches below the deck surface, so that much clearance is needed below deck when the pole is lowered and stowed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the base dimensions?\u003c\/strong\u003e The flush-mount base used by the 7100B7 measures 4 inches long by 1-5\/8 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of lamp does this light use?\u003c\/strong\u003e It uses a 9-watt wedge-base incandescent lamp as the light source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this light protected from water and dirt when stowed?\u003c\/strong\u003e Yes, the 911339 plug-in base included with the 7100B7 has an integrated swivel cover that shields the interior socket from water, dirt, and debris when the pole is removed or stowed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 7100B7 a genuine replacement part?\u003c\/strong\u003e Yes, it is designated as a genuine legacy replacement part designed as a drop-in solution for existing plug-in style stern lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the operating voltage?\u003c\/strong\u003e The Attwood 7100B7 operates on 12 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the lens and housing?\u003c\/strong\u003e The 7100B7 has a beige polycarbonate lens set in an aluminum-silver finished housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 7100B7 weigh?\u003c\/strong\u003e The Attwood 7100B7 weighs 1.0313 pounds.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989674995931,"sku":"ATT-7100B7","price":80.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31fV83n3RkL.jpg?v=1784487103"},{"product_id":"attwood-91017b7-all-round-navigation-light-globe-frosted-360deg-screw-on-replacement-lens-for-early-attwood-7100-7101-7105-series","title":"Attwood 91017B7 Frosted 360 Degree Replacement Globe for 7100\/7101 Series All-Round Lights","description":"\u003cp\u003eThe Attwood 91017B7 is a frosted, 360-degree replacement globe designed to restore an early Attwood all-round navigation light without replacing the entire fixture. The screw-on globe installs in place of a cracked, yellowed, or scratched lens, letting you keep the existing base and wiring intact. The frosted anti-glare finish diffuses the bulb's light evenly around the full 360-degree field of view, keeping the light easy on nearby boaters' eyes from sunset to sunrise while still meeting the visibility a navigation light is meant to provide.\u003c\/p\u003e\u003cp\u003eThe globe is molded from plastic in a white, frosted finish and is built for the 12 volt boat lighting systems that early Attwood all-round lights use. It is designed to fit early Attwood light models 7100, 7101, 7105, 7109, 7205, 910958, and 910957. It is not intended for the 5610-48-7 telescoping all-around light, which uses a different globe.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 91017B7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 360 Degree Replacement Globe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Frosted, Anti-Glare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source Type:\u003c\/strong\u003e Wired\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Screw-On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9.5 x 5.75 x 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2333 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEarly Attwood all-round light models: 7100, 7101, 7105, 7109, 7205, 910958, 910957\u003c\/li\u003e\n\u003cli\u003eAlso compatible with early Attwood 5100 and 5110 series lights\u003c\/li\u003e\n\u003cli\u003eDoes not fit the 5610-48-7 telescoping all-around light\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 91017B7?\u003c\/strong\u003e The Attwood 91017B7 is a frosted, 360-degree replacement globe (lens) that screws onto compatible early Attwood all-round navigation lights, letting you replace just the globe instead of the whole fixture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Attwood light models does the 91017B7 globe fit?\u003c\/strong\u003e It is designed for early Attwood all-round light models 7100, 7101, 7105, 7109, 7205, 910958, and 910957, as well as the 5100 and 5110 series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 91017B7 fit a 5610-48-7 telescoping all-around light?\u003c\/strong\u003e No. The 91017B7 frosted globe does not fit the 5610-48-7 Telescoping All Around Light; that model uses a different replacement globe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish is this globe?\u003c\/strong\u003e It is a white globe with a frosted, anti-glare finish that diffuses the light evenly around the 360-degree field of view while reducing glare for nearby boaters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 91017B7 lens made of?\u003c\/strong\u003e The globe is molded from plastic, the standard lens material used on Attwood's early all-round navigation lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install the 91017B7 replacement globe?\u003c\/strong\u003e The 91017B7 is a screw-on globe: it threads directly onto the base of a compatible fixture, so no rewiring or full fixture replacement is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage system is the 91017B7 compatible with?\u003c\/strong\u003e It is built for 12 volt boat lighting systems, matching the wired light source used in early Attwood all-round lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 91017B7 globe?\u003c\/strong\u003e The Attwood 91017B7 measures 9.5 x 5.75 x 4.5 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 91017B7 weigh?\u003c\/strong\u003e The 91017B7 replacement globe weighs 0.2333 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many globes come in one 91017B7 package?\u003c\/strong\u003e Each 91017B7 package contains a single replacement globe (unit count of 1).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 91017B7 an original Attwood part or an aftermarket copy?\u003c\/strong\u003e The 91017B7 is Attwood's own replacement globe for its early all-round lights, made to the original fit and finish rather than a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace just the globe instead of the whole light?\u003c\/strong\u003e If the base and wiring of an early Attwood all-round light are still functional, the 91017B7 lets you restore visibility by swapping only the cracked or discolored frosted globe, avoiding the cost of a full fixture replacement.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989675913435,"sku":"ATT-91017B7","price":7.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-91017b7_lg__03228.1558110829.500.750.jpg?v=1785188437"},{"product_id":"attwood-910r2pb-1-plug-in-light-base-black-composite-round-base-for-pole-navigation-lights","title":"Attwood 910R Series Round Light Base, Black Composite, Replaces 91020-7","description":"\u003cp\u003eThe Attwood 910R2PB-1 is a round plug-in base for boat pole lights, built in black composite for a durable, low-profile mounting point on the stern. It is designed to be used with a pole light and accepts globes from Attwood's compatible series, including the Frosted Globe 5110 Series and the Anti-Glare 5310, 5320, 5330, and 5340 Series, so it works as a direct upgrade point when refreshing an existing navigation light setup. The base carries a waterproof rating suited to the marine deck environment, and at just 0.09 pounds it adds negligible weight to the transom or gunwale where it is installed. Its compact footprint of 2.25 x 2.25 x 2.75 inches keeps the mounting point unobtrusive while still providing a secure plug-in connection for the pole light above it. The 910R2PB-1 is part of Attwood's broader 910R Series round base line, which is also offered in 316 Stainless Steel and 306 Stainless Steel Overmold (black and white) for boat owners who want a metal-finished base instead of composite. This composite version replaces the earlier 91020-7 base, making it a straightforward swap for boats that used that earlier part. Some assembly is required at installation. Whether replacing a worn or cracked base or building out a new stern light setup, the 910R2PB-1 gives a reliable, waterproof foundation for the pole light and globe.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 910R2PB-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Round pole light base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 2.25 x 2.25 x 2.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697016331\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Globes:\u003c\/strong\u003e Frosted Globe 5110 Series; Anti-Glare 5310, 5320, 5330, 5340 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces:\u003c\/strong\u003e 91020-7\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUse with a pole light and the Frosted Globe 5110 Series or Anti-Glare 5310, 5320, 5330, and 5340 Series globes\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e91020-7\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 910R2PB-1 used for?\u003c\/strong\u003e The 910R2PB-1 is a round plug-in base used with a pole light on a boat, providing the mounting point where the light pole connects to the deck or stern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 910R2PB-1 base waterproof?\u003c\/strong\u003e Yes, the Attwood 910R2PB-1 round light base is rated waterproof, making it suitable for the wet, exposed conditions of a boat deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 910R2PB-1 base made of?\u003c\/strong\u003e This version of the 910R round base is made of black composite. Attwood also offers the same round base style in 316 Stainless Steel and 306 Stainless Steel Overmold (black and white) for those who want a metal finish instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 910R2PB-1 light base?\u003c\/strong\u003e The base measures 2.25 x 2.25 x 2.75 inches (length x width x height).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 910R2PB-1 weigh?\u003c\/strong\u003e The Attwood 910R2PB-1 light base weighs 0.09 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 910R2PB-1 replace the older 91020-7 base?\u003c\/strong\u003e Yes, the 910R2PB-1 is the current replacement for the earlier 91020-7 light base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich globes fit the 910R2PB-1 base?\u003c\/strong\u003e This base is designed for use with a pole light using the Frosted Globe 5110 Series or the Anti-Glare 5310, 5320, 5330, and 5340 Series globes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 910R2PB-1 require assembly?\u003c\/strong\u003e Yes, assembly is required to install the 910R2PB-1 base with its pole light and globe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 910R2PB-1 base?\u003c\/strong\u003e The 910R2PB-1 is black, consistent with its black composite construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 910R2PB-1 an original Attwood part?\u003c\/strong\u003e Yes, the 910R2PB-1 is a genuine Attwood part number within the 910R Series round base line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 910R2PB-1 and the stainless steel round bases?\u003c\/strong\u003e The 910R2PB-1 is the black composite version of the 910R Series round base; Attwood also makes the same round base in 316 Stainless Steel and 306 Stainless Steel Overmold (available in black and white) for buyers who prefer a metal finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 910R2PB-1?\u003c\/strong\u003e The 910R2PB-1 ships as the round light base itself; the pole light and globe are used with it as separate components.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989676110043,"sku":"ATT-910R2PB-1","price":15.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/910R2PB-1.2__48788.1722491010.500.750.jpg?v=1785188410"},{"product_id":"attwood-910r3pb-1-lightarmor-3-pin-plug-in-light-base-black-composite-replaces-91021-7","title":"Attwood 3-Pin Plug-In Light Base, Black Composite Cover - 910R3PB-1","description":"\u003cp\u003eThe Attwood 910R3PB-1 is a 3-pin plug-in light base designed to mount and power a boat's stern or all-round navigation light. It features a black composite cover, giving it a low-profile, corrosion-resistant finish that holds up well in the marine environment compared to painted metal bases. The base uses a waterproof plug-in connection at the front mounting position, allowing the light pole to be inserted and removed without tools for storage or winterizing, while keeping the wiring connection sealed against spray and rain.\u003c\/p\u003e\u003cp\u003eThis base is part of Attwood's 3-pin light base lineup, which is also offered in 316 stainless steel and 306 stainless steel overmold versions with black or white covers, so boat owners can match the base finish to their light fixture or hardware. The 910R3PB-1 is the black composite version, offering a lightweight, non-metallic alternative for boats where a stainless finish is not required. It is intended as a direct mounting point for a compatible 3-pin plug-in navigation light pole and is a standard replacement part for boats that already use a 3-pin plug-in base system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 910R3PB-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 3-Pin Plug-In Light Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover Material:\u003c\/strong\u003e Black Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Configuration:\u003c\/strong\u003e 3-Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Position:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697016751\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal 3-pin plug-in mount; compatible with boats using a standard 3-pin plug-in navigation light pole and base system.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo manufacturer cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 910R3PB-1 used for?\u003c\/strong\u003e The 910R3PB-1 is a 3-pin plug-in light base used to mount a boat's navigation or stern light pole and provide a waterproof electrical connection at the base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 910R3PB-1 base made from?\u003c\/strong\u003e This base has a black composite cover, a non-metallic finish that resists corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 910R3PB-1 waterproof?\u003c\/strong\u003e Yes, the 3-pin plug-in connection on the 910R3PB-1 is a waterproof design, sealing the electrical connection against spray and rain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 910R3PB-1 light base weigh?\u003c\/strong\u003e The Attwood 910R3PB-1 weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 910R3PB-1 come in other finishes?\u003c\/strong\u003e Attwood's 3-pin light base is also available in 316 stainless steel, and in a 306 stainless steel overmold version with black or white covers; the 910R3PB-1 specifically is the black composite version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the plug-in connector positioned on the 910R3PB-1?\u003c\/strong\u003e The mounting position for the 910R3PB-1's plug-in connector is at the front of the base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I remove the light pole from the 910R3PB-1 without tools?\u003c\/strong\u003e Yes, the 3-pin plug-in design of the 910R3PB-1 allows the light pole to be plugged in and removed by hand, which is useful for storage or winterizing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 910R3PB-1 the same as the teardrop-style base?\u003c\/strong\u003e No, the 910R3PB-1 is a standard 3-pin light base, which is a separate style from Attwood's 910T series teardrop base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between a composite and stainless steel 910 series base?\u003c\/strong\u003e The 910R3PB-1 uses a black composite cover, while other parts in the same 3-pin base family use 316 stainless steel or 306 stainless steel overmold covers instead of composite.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 910R3PB-1 include the light pole?\u003c\/strong\u003e The 910R3PB-1 is the plug-in light base only; it does not include a light pole.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989676142811,"sku":"ATT-910R3PB-1","price":16.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/910R3PB-1__07473.1739460418.500.750.jpg?v=1785188988"},{"product_id":"attwood-911339-7-plug-in-base-for-7100-series-stern-lights-zamak-2-pin-standard-pole-base-with-swivel-cover","title":"Attwood Stowaway Light Base 911339-7 for 7100 Series Stern Lights","description":"\u003cp\u003eThe Attwood 911339-7 is a replacement base assembly for Attwood's 7100 series plug-in stowaway stern lights. This is the base only -- it does not include the pole or the wedge-base lamp -- making it the correct part to order when the base on your existing stowaway light has cracked, corroded, or lost its swivel cover, without needing to replace the entire light assembly. The base is built from Zamak (zinc alloy) for corrosion resistance in the marine environment and mounts nearly flush, extending just 3 inches below deck so it clears bilge areas and stowage compartments. A swivel cover on top of the base rotates into place to protect the electrical socket from moisture and debris whenever the light pole is removed and stowed. The base measures 4 inches long by 1-5\/8 inches wide by 1-3\/8 inches in diameter, and mounting is handled through three countersunk holes sized for #10 fasteners, allowing it to sit flush with the deck surface. It is designed to accept Attwood's compatible stowaway light poles, including the 2-pin standard pole, so boaters can swap poles seasonally while keeping a permanent, weathertight base installed on deck. This base is intended for use with Attwood 6377 and 7100-SP series stowaway lights.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 911339-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Stowaway light base (base only, no pole or lamp)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Series:\u003c\/strong\u003e Attwood 6377 and 7100-SP series stowaway lights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 4 inches L x 1-5\/8 inches W x 1-3\/8 inches diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Height Below Deck:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.56 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zamak (zinc alloy)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Three countersunk holes for #10 fasteners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature:\u003c\/strong\u003e Swivel cover protects the socket when the light pole is stowed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697913395\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAttwood 7100-SP series stowaway stern lights\u003c\/li\u003e\n\u003cli\u003eAttwood 6377 series stowaway stern lights\u003c\/li\u003e\n\u003cli\u003eCompatible with Attwood 2-pin standard poles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo manufacturer cross-reference numbers are listed for this base assembly.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 911339-7?\u003c\/strong\u003e It is a replacement base assembly for Attwood's 7100 series plug-in stowaway stern lights, sold as the base only without the pole or lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 911339-7 base include the light pole and bulb?\u003c\/strong\u003e No. The 911339-7 is the base only; the pole and 9-watt wedge-base lamp are separate components and are not included with this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this stowaway light base?\u003c\/strong\u003e The 911339-7 base measures 4 inches long by 1-5\/8 inches wide by 1-3\/8 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far does the base extend below the deck?\u003c\/strong\u003e The Attwood 911339-7 base extends just 3 inches below the deck, keeping the footprint shallow for mounting in tight spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 911339-7 base made of?\u003c\/strong\u003e The base is made of Zamak, a zinc alloy chosen for its corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 911339-7 base weigh?\u003c\/strong\u003e The base assembly weighs 0.56 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is needed to mount the 911339-7?\u003c\/strong\u003e It mounts using three countersunk holes sized for #10 fasteners, which are not included with the base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the swivel cover on the base do?\u003c\/strong\u003e The swivel cover on the 911339-7 base rotates into place over the electrical socket to protect it from moisture and debris whenever the light pole is removed and stowed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Attwood stowaway lights is this base compatible with?\u003c\/strong\u003e The 911339-7 base is intended for use with Attwood 6377 and 7100-SP series stowaway stern lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this base with a 2-pin standard pole?\u003c\/strong\u003e Yes, the 911339-7 base is designed to work with Attwood's 2-pin standard pole for stowaway lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace just the base instead of the whole light?\u003c\/strong\u003e If the base of your Attwood stowaway light has cracked, corroded, or the swivel cover no longer seats properly, the 911339-7 lets you replace just that component instead of buying an entirely new light and pole assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 911339-7 an OEM part?\u003c\/strong\u003e Yes, it is manufactured by Attwood as the genuine replacement base for its 7100 series stowaway light line.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989676241115,"sku":"ATT-911339-7","price":24.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-911339-7_lg__33031.1558139738.500.750.jpg?v=1785188031"},{"product_id":"attwood-912852-7-anti-glare-replacement-globe-for-all-round-navigation-lights-fits-5300-5340-new-style-white","title":"Attwood 912852-7 Replacement Anti-Glare Globe for 5300-5340 Series Pole Lights - White","description":"\u003cp\u003eThe Attwood 912852-7 is a replacement anti-glare globe for Attwood new-style pole-mounted all-round navigation lights. Made of translucent white plastic, it screws directly onto the light housing to restore full 360-degree white illumination on aft navigation light poles. This globe is designed to replace a cracked, damaged, or yellowed original globe without requiring a full fixture replacement, keeping the light compliant and visible from all directions.\u003c\/p\u003e\u003cp\u003eThe anti-glare finish diffuses the bulb's light evenly across the globe surface, reducing hot spots and harsh glare while maintaining consistent visibility for other vessels. It is built for the new-style Attwood pole light series, fitting model numbers 5300, 5310, 5320, 5330, and 5340. The globe is a single-piece screw-on component, and assembly onto the existing light base is required after installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 912852-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Replacement Navigation Light Globe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Translucent plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Anti-glare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Screw-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Models:\u003c\/strong\u003e 5300, 5310, 5320, 5330, 5340\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.75 x 9.5 x 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3333 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697912855\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAttwood new-style pole lights, models 5300, 5310, 5320, 5330, 5340\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Attwood 912852-7 globe fit?\u003c\/strong\u003e The 912852-7 globe fits Attwood's new-style pole light models 5300, 5310, 5320, 5330, and 5340.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this replacement globe?\u003c\/strong\u003e It is white, made of translucent white plastic that diffuses light evenly around the fixture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 912852-7 globe anti-glare?\u003c\/strong\u003e Yes, the 912852-7 has an anti-glare finish that reduces harsh hot spots while still providing full 360-degree visibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the globe attach to the light pole?\u003c\/strong\u003e The 912852-7 is a screw-on globe that threads directly onto the base of the new-style Attwood pole light fixture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace my navigation light globe?\u003c\/strong\u003e Replace the globe when it becomes cracked, damaged, or yellowed, which can dim the light output and affect visibility of your Attwood pole light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 912852-7 globe?\u003c\/strong\u003e The globe measures 5.75 x 9.5 x 4.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 912852-7 globe weigh?\u003c\/strong\u003e It weighs 0.3333 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 912852-7 come with the bulb or base included?\u003c\/strong\u003e No, the 912852-7 is the replacement globe only; it is a single-unit component that requires assembly onto your existing light base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this globe work on Attwood's old-style pole lights?\u003c\/strong\u003e No, the 912852-7 is designed for the new-style Attwood pole light series (models 5300 through 5340), not the old-style 3900 series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 912852-7 an OEM Attwood part?\u003c\/strong\u003e Yes, 912852-7 is the genuine Attwood manufacturer part number for this replacement globe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many globes come in one order?\u003c\/strong\u003e One order of the 912852-7 includes a single replacement globe (unit count of 1).\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989676273883,"sku":"ATT-912852-7","price":4.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-912852-7_lg__33889.1558180396.500.750.jpg?v=1785188084"},{"product_id":"attwood-lightarmor-910v2pb-7-2-pin-rectangle-pole-light-base-black-composite-fits-5530-5540-led-5110-frosted-5310-5340-anti-glare-and-nv6lc1-bi-color-pole-lights","title":"Attwood 910V2PB-7 LightArmor Black 2-Pin Rectangle Pole Light Base","description":"\u003cp\u003eThe Attwood 910V2PB-7 is a 2-pin rectangle light base from the Attwood LightArmor series, built to mount and power pole-style navigation lights on a boat. It is designed to work with the 910V2 base configuration and pairs with a wide range of Attwood pole light heads, including the Frosted Globe 5110 series, Anti-Glare 5310, 5320, 5330, and 5340 series, LED Anti-Glare 5530 and 5540 series, and Bi-Color NV6LC1, 5092, and 5091 series lights. The base uses a threaded locking system that matches the threaded locking collars on Attwood pole lights, so the pole seats securely and resists loosening from vibration while underway.\u003c\/p\u003e\u003cp\u003eConstruction is a durable black composite, chosen for resistance to corrosion, UV exposure, and the general wear of a saltwater environment. A flip-top cover protects the internal 2-pin contacts from water and debris when the pole light is removed, helping keep the electrical connection reliable over time. The base measures 7 x 4 x 3 inches and runs on a 12 volt DC marine electrical system, matching standard boat wiring. It installs as a deck or gunwale-mounted base for a removable pole light and does not require assembly beyond standard wiring and mounting hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 910V2PB-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Pole Light Base (2-Pin Rectangle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Configuration:\u003c\/strong\u003e 2-Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Shape:\u003c\/strong\u003e Rectangle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 7 x 4 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3667 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Pole Light Series:\u003c\/strong\u003e 910V2 - Frosted Globe 5110 series, Anti-Glare 5310\/5320\/5330\/5340 series, LED Anti-Glare 5530\/5540 series, Bi-Color NV6LC1\/5092\/5091 series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Corrosion Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697017123\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits any Attwood pole light built on the 910V2 2-pin base pattern, including the Frosted Globe 5110 series, Anti-Glare 5310, 5320, 5330, and 5340 series, LED Anti-Glare 5530 and 5540 series, and Bi-Color NV6LC1, 5092, and 5091 series.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 910V2PB-7 used for?\u003c\/strong\u003e The 910V2PB-7 is a 2-pin rectangle base that mounts on a boat and powers a removable Attwood pole navigation light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich pole lights fit the 910V2PB-7 base?\u003c\/strong\u003e This base works with Attwood's 910V2 2-pin light series, covering the Frosted Globe 5110 series, Anti-Glare 5310, 5320, 5330, and 5340 series, LED Anti-Glare 5530 and 5540 series, and Bi-Color NV6LC1, 5092, and 5091 series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 910V2PB-7 a 2-pin or 3-pin base?\u003c\/strong\u003e It is a 2-pin base, designated 910V2, so it is matched to 2-pin Attwood pole lights rather than the 3-pin 910V3 Bi-Color series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 910V2PB-7 light base?\u003c\/strong\u003e The 910V2PB-7 has a black finish, made from black composite material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 910V2PB-7 made of?\u003c\/strong\u003e It is constructed from a high-impact, corrosion-resistant black composite designed to withstand saltwater, UV exposure, and general marine wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 910V2PB-7 base?\u003c\/strong\u003e The base measures 7 x 4 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 910V2PB-7 weigh?\u003c\/strong\u003e The Attwood 910V2PB-7 weighs 0.3667 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 910V2PB-7 base have a cover to protect the electrical contacts?\u003c\/strong\u003e Yes, a flip-top cover on the 910V2PB-7 closes over the 2-pin contacts to shield them from water and debris when the pole light is not installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 910V2PB-7 base run on?\u003c\/strong\u003e It is designed for a 12 volt DC marine electrical system, matching standard boat wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the pole light lock into the 910V2PB-7 base?\u003c\/strong\u003e The 910V2PB-7 uses a threaded locking system that matches the threaded locking collars on Attwood pole lights, holding the pole securely in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs any assembly required to install the 910V2PB-7?\u003c\/strong\u003e No, the 910V2PB-7 does not require assembly; it installs directly with standard mounting and wiring.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989676306651,"sku":"ATT-910V2PB-7","price":21.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71TBV0pJZIL.jpg?v=1784487184"},{"product_id":"attwood-nv2012ssr-7-stainless-steel-led-red-side-navigation-light-1-nautical-mile","title":"Attwood 1-NM Stainless Steel LED Side Light, Red Lens (NV2012SSR-7)","description":"\u003cp\u003eThe Attwood NV2012SSR-7 is a 1 nautical mile (1-NM) LED side light with a red lens, built with a stainless steel housing for corrosion resistance in the marine environment. As a red navigation light, it is used as part of a boat's running light setup to signal the vessel's position and heading to other boaters after dark or in low visibility. The stainless steel body is designed to hold up to sun, saltwater, and spray better than plastic housings, while the LED source is built for long service life with low current draw compared to incandescent bulbs. This side light is sized for smaller boats and applications where a 1 nautical mile visibility rating meets navigation light requirements. Its compact profile makes it suitable for mounting on bow rails, cabin sides, or other low-profile locations where a small, durable running light is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e NV2012SSR-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 1-NM SS LED Side Light, Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Rating:\u003c\/strong\u003e 1 nautical mile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Navigation Lights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697013163\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.245 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood NV2012SSR-7?\u003c\/strong\u003e The NV2012SSR-7 is a 1 nautical mile LED side light with a red lens, built with a stainless steel housing, made by Attwood.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the visibility rating of this light?\u003c\/strong\u003e This Attwood side light carries a 1 nautical mile (1-NM) visibility rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the lens on the NV2012SSR-7?\u003c\/strong\u003e The lens is red, matching the red side of a boat's standard navigation light setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing made of?\u003c\/strong\u003e The housing on this Attwood side light is stainless steel, chosen for corrosion resistance in marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this light LED?\u003c\/strong\u003e Yes, the NV2012SSR-7 uses an LED light source rather than an incandescent bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this light weigh?\u003c\/strong\u003e The Attwood NV2012SSR-7 weighs 0.245 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The UPC for the Attwood NV2012SSR-7 is 022697013163.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is this light suited for?\u003c\/strong\u003e A 1 nautical mile visibility rating like that of the NV2012SSR-7 is typically used on smaller boats where this rating meets navigation light requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill stainless steel hold up better than a plastic housing?\u003c\/strong\u003e Stainless steel, as used in the NV2012SSR-7 housing, generally resists saltwater corrosion and UV degradation better than plastic housings over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a port or starboard light?\u003c\/strong\u003e The NV2012SSR-7 is Attwood's red side light; red is the lens color specified for this part.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989677420763,"sku":"ATT-NV2012SSR-7","price":49.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_7b6c9c43-0f6c-4e19-8641-5ab07aacbad4.jpg?v=1785353543"},{"product_id":"attwood-nv2002ss-7-lightarmor-round-bi-color-led-navigation-light-stainless-steel-deck-mount-uscg-2-mile-range","title":"Attwood LightArmor Round Bi-Color LED Deck Mount Navigation Light NV2002SS-7, 2 Nautical Mile Range, Stainless Steel","description":"\u003cp\u003eThe attwood LightArmor Round Bi-Color LED Deck Mount Navigation Light (NV2002SS-7) combines red and green sidelights into a single, compact round housing for boats up to 65.6 feet (20 meters) in length. Its USCG CFR 183.81 certified, ABYC A-16 and C-5 compliant design delivers a 2 nautical mile visibility range, giving other vessels a clear reference to your boat's position and heading during night operation.\u003c\/p\u003e\u003cp\u003eThe housing is built from stainless steel for corrosion resistance in harsh marine environments, paired with a clear polycarbonate lens rated dustproof and waterproof. Inside, attwood's proprietary modular LED light engine runs on 12 volts at 10 watts, providing brighter, more efficient, and longer-lasting illumination than a traditional halogen bulb. The bi-color, all-in-one layout eliminates the need for separate port and starboard fixtures, simplifying deck layout and wiring.\u003c\/p\u003e\u003cp\u003eDeck mount installation is low profile and straightforward, letting the light sit flush against the deck surface for a clean look. The unit measures 3 x 5 x 5.5 inches and ships as a single, ready-to-install fixture; no assembly is required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e NV2002SS-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Bi-Color (red\/green)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source Type:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 10 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Range:\u003c\/strong\u003e 2 nautical miles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e USCG CFR 183.81, ABYC A-16 and C-5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Recommended Boat Length:\u003c\/strong\u003e 65.6 feet (20 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Deck Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Features:\u003c\/strong\u003e Dustproof, Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3 x 5 x 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697012432\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the visibility range of the NV2002SS-7 navigation light?\u003c\/strong\u003e The attwood LightArmor NV2002SS-7 provides a certified 2 nautical mile visibility range, meeting USCG CFR 183.81 and ABYC A-16\/C-5 standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is this light designed for?\u003c\/strong\u003e This deck mount light is engineered for boats up to 65.6 feet (20 meters) in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fixture combine both red and green navigation lights?\u003c\/strong\u003e Yes, the NV2002SS-7 is a bi-color unit that houses both red and green lights in a single round housing, eliminating the need for separate port and starboard fixtures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the housing made from?\u003c\/strong\u003e The housing on this attwood navigation light is stainless steel, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the NV2002SS-7 mounted?\u003c\/strong\u003e It uses a low-profile deck mount configuration for a flush, effortless installation on the boat's deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and wattage does this light require?\u003c\/strong\u003e The NV2002SS-7 operates on 12 volts and draws 10 watts of power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the lens waterproof and dustproof?\u003c\/strong\u003e Yes, the polycarbonate lens on this light is rated both dustproof and waterproof for reliable operation in harsh conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the lens?\u003c\/strong\u003e The NV2002SS-7 has a clear lens housing the internal red and green LED elements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this navigation light?\u003c\/strong\u003e The attwood NV2002SS-7 measures 3 x 5 x 5.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this navigation light weigh?\u003c\/strong\u003e The NV2002SS-7 weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the NV2002SS-7 require assembly?\u003c\/strong\u003e No, this navigation light ships ready to install with no assembly required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this navigation light USCG compliant?\u003c\/strong\u003e Yes, the attwood NV2002SS-7 is USCG CFR 183.81 certified and meets ABYC A-16 and C-5 standards for bi-color navigation lights.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989677519067,"sku":"ATT-NV2002SS-7","price":55.62,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/NV2002SS-7__85162.1737832796.500.750.jpg?v=1785188876"},{"product_id":"attwood-nv2012ssg-7-lightarmor-2-mile-green-starboard-led-navigation-sidelight-stainless-steel-deck-mount","title":"Attwood NV2012SSG-7 LightArmor Green Starboard Deck Mount Sidelight, 2-Mile Visibility","description":"\u003cp\u003eThe Attwood LightArmor NV2012SSG-7 is a round deck mount navigation sidelight built for the starboard side of a boat. Its compact, low-profile 304 stainless steel housing holds a green LED lighting element rated for U.S.C.G.-certified 2-mile visibility, meeting the required range for recreational vessels underway at night. The housing is corrosion- and water-resistant with an IP67 ingress protection rating, so it stands up to spray, rain, and washdown without letting moisture reach the electronics.\u003c\/p\u003e\u003cp\u003eA telltale indicator sits atop the housing so the helm operator can visually confirm the light is illuminated without having to look overboard. The LED source runs cool to the touch and is built for long service life compared to a traditional bulb, reducing the need for frequent relamping. The polycarbonate lens is molded in green to meet navigation light color requirements for the starboard position, and the fixture operates on a standard 12-volt DC marine electrical system. This sidelight is intended for boats up to 65.6 feet (20 meters) in length. Because it is a starboard-specific unit, it should be paired with a matching port-side navigation light (a separate part) to complete a vessel's running light set.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e NV2012SSG-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e LightArmor 2-Mile Navigation Deck Mount Sidelight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Green (Starboard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Rating:\u003c\/strong\u003e 2 nautical miles, U.S.C.G.-certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Deck Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVessel Length Compatibility:\u003c\/strong\u003e Up to 65.6 feet (20 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7 x 7 x 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.245 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697013156\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for boats up to 65.6 feet (20 meters) in length using a 12-volt DC electrical system.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the NV2012SSG-7 a port or starboard light?\u003c\/strong\u003e The Attwood NV2012SSG-7 is a starboard-side navigation sidelight with a green lens and green LED. It is not interchangeable with a port light, which uses a red lens and is a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far can this sidelight be seen at night?\u003c\/strong\u003e The NV2012SSG-7 provides U.S.C.G.-certified visibility up to 2 nautical miles, meeting the required range for a starboard navigation light on recreational boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is this light rated for?\u003c\/strong\u003e This Attwood deck mount sidelight is intended for boats up to 65.6 feet (20 meters) in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the NV2012SSG-7 run on?\u003c\/strong\u003e It operates on a standard 12-volt DC marine electrical system, matching typical boat wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing made of?\u003c\/strong\u003e The NV2012SSG-7 has a round 304 stainless steel housing that resists corrosion in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this light waterproof?\u003c\/strong\u003e The housing carries an IP67 ingress protection rating, making it water- and corrosion-resistant for deck mounting in wet conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this sidelight?\u003c\/strong\u003e The Attwood NV2012SSG-7 measures 7 x 7 x 7 inches and weighs 0.245 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know the light is working without checking from outside the boat?\u003c\/strong\u003e A telltale indicator on top of the NV2012SSG-7 housing glows when the LED is illuminated, so the light's status can be confirmed from the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color lens does this light use?\u003c\/strong\u003e The NV2012SSG-7 uses a green polycarbonate lens, which is the required color for a starboard-side navigation light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an LED or incandescent light?\u003c\/strong\u003e The NV2012SSG-7 uses an LED light source, which stays cool to the touch and is built for a long service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the NV2012SSG-7 mounted?\u003c\/strong\u003e This Attwood sidelight is a deck mount fixture, installed on a flat deck surface rather than a side rail or bracket.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989677486299,"sku":"ATT-NV2012SSG-7","price":49.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71Cj_ftb5OL.jpg?v=1784487263"},{"product_id":"attwood-nv2002pb-7-lightarmor-deck-mount-led-navigation-light-2-nm-round-bi-color-sidelight-black","title":"Attwood NV2002PB-7 LightArmor 2 Nautical Mile Round Bi-Color LED Deck Mount Navigation Light, Black","description":"\u003cp\u003eThe Attwood NV2002PB-7 is a round, bi-color LED deck mount navigation light from Attwood's LightArmor line, combining red and green sidelight coverage into a single low-profile fixture. Built with a proprietary modular LED light engine, it delivers consistent 2 nautical mile visibility, making it suited for boats that require a 2-NM rated sidelight. The housing is finished in black and uses a durable polycarbonate lens designed to resist water, UV exposure, and marine corrosion over time.\u003c\/p\u003e\u003cp\u003eThis light meets ABYC C-5 and A-16 navigation lighting standards as well as USCG CFR 183.81, so it can be used as a compliant replacement or new installation on vessels requiring certified navigation lighting. The deck mount design and modular construction are intended for straightforward installation, and the compact footprint keeps the light's profile low on deck. The NV2002PB-7 is packaged as an aftermarket unit, distinct from the NV2002PB-1 bulk-packaged version of the same light.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e NV2002PB-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Type:\u003c\/strong\u003e Round Bi-Color LED Navigation Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Range:\u003c\/strong\u003e 2 nautical miles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Deck Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 12 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance Standards:\u003c\/strong\u003e ABYC C-5 and A-16, USCG CFR 183.81\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.98 x 5 x 2.99 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2283 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697012425\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 Years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Aftermarket Packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood NV2002PB-7?\u003c\/strong\u003e It is a round, bi-color LED deck mount navigation light from Attwood's LightArmor line, rated for 2 nautical mile visibility and finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color combination does this light show?\u003c\/strong\u003e The NV2002PB-7 is a bi-color light, combining red and green sidelight indication in a single round fixture rather than requiring separate port and starboard lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the NV2002PB-7 legal for use on the water?\u003c\/strong\u003e Yes, this light meets ABYC C-5 and A-16 navigation lighting standards and USCG CFR 183.81, so it is compliant for regulated navigation lighting use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far is the NV2002PB-7 visible?\u003c\/strong\u003e The light is rated for 2 nautical mile visibility, produced by Attwood's proprietary modular LED light engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this navigation light?\u003c\/strong\u003e The NV2002PB-7 measures 5.98 x 5 x 2.99 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the NV2002PB-7 weigh?\u003c\/strong\u003e This light weighs 0.2283 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of?\u003c\/strong\u003e The NV2002PB-7 uses a polycarbonate lens, chosen for resistance to water, UV exposure, and marine corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the NV2002PB-7 installed?\u003c\/strong\u003e It is a deck mount fixture with a modular design intended for straightforward installation on the boat's deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the NV2002PB-7 and NV2002PB-1?\u003c\/strong\u003e Both are the same round bi-color 2 nautical mile LED light; the NV2002PB-7 is sold in aftermarket packaging while the NV2002PB-1 is the bulk-packaged version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the NV2002PB-7 waterproof?\u003c\/strong\u003e Yes, waterproofing is a listed feature of this Attwood LightArmor navigation light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wattage does this light draw?\u003c\/strong\u003e The NV2002PB-7 is rated at 12 watts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the NV2002PB-7 come with a warranty?\u003c\/strong\u003e This Attwood navigation light is backed by a 5 year manufacturer warranty.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989677617371,"sku":"ATT-NV2002PB-7","price":45.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/NV2002PB__93256.1722514537.500.750.jpg?v=1785189213"},{"product_id":"attwood-lightarmor-nv3012ssg-7-green-starboard-led-navigation-side-light-2-nm-stainless-steel-vertical-mount-boats-to-65-6-ft","title":"Attwood LightArmor NV3012SSG-7 Green Starboard 2-NM LED Sidelight, Stainless Steel, Vertical Mount","description":"\u003cp\u003eThe attwood LightArmor NV3012SSG-7 is a 2-Nautical Mile green starboard-side navigation light built for boats up to 65.6 feet (20 meters) in length. Its round housing is made from electro-polished 304 stainless steel, giving it strong resistance to corrosion in both saltwater and freshwater environments. The light surface-mounts vertically, with a compact, low-profile footprint that keeps the installation footprint small.\u003c\/p\u003e\u003cp\u003eInside the sealed housing is a proprietary LED engine that draws just 2.4 watts at 12 volts DC, stays cool to the touch, and is rated for 50,000+ hours of service life, removing the need for regular bulb changes. The internal electronics are fully encapsulated and carry an IP67 waterproof rating, protecting against water intrusion, spray, temporary immersion, vibration, and UV exposure. Reverse polarity protection guards against mis-wiring damage during installation, and a built-in tell-tale indicator lets you visually confirm the light is operating from the helm.\u003c\/p\u003e\u003cp\u003eThe light meets USCG, ABYC A-16, and EN\/ISO 19009 navigation light standards, with sharp cut-off angles and a vibrant green LED for clear starboard-side identification. The lens is clear polycarbonate. This is the green starboard unit only; the matching red port-side light is a separate part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e NV3012SSG-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Green (Starboard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Vertical Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Range:\u003c\/strong\u003e 2 Nautical Miles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e 304 Stainless Steel, electro-polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 2.4 Watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Rating:\u003c\/strong\u003e IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Service Life:\u003c\/strong\u003e 50,000+ hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7 x 7 x 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2264 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Boat Length:\u003c\/strong\u003e 65.6 feet (20 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e USCG, ABYC A-16, EN\/ISO 19009\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e Tell-tale indicator, reverse polarity protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich side of the boat does the NV3012SSG-7 go on?\u003c\/strong\u003e The NV3012SSG-7 is a green LED light designated for the starboard side only; it is not interchangeable with the port side. A matching red port-side light is sold under a different part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this navigation light USCG compliant?\u003c\/strong\u003e Yes, the NV3012SSG-7 is a 2-Nautical Mile light that meets USCG, ABYC A-16, and EN\/ISO 19009 navigation light standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far can this light be seen?\u003c\/strong\u003e The NV3012SSG-7 provides 2-Nautical Mile visibility, with sharp cut-off angles for clear starboard-side identification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing made of?\u003c\/strong\u003e The housing is electro-polished 304 stainless steel, chosen for corrosion resistance in both saltwater and freshwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much power does the light draw?\u003c\/strong\u003e At 12 volts DC, the NV3012SSG-7 draws 2.4 watts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the NV3012SSG-7 waterproof?\u003c\/strong\u003e The internal electronics are fully sealed and carry an IP67 waterproof rating, protecting against water intrusion, spray, temporary immersion, vibration, and UV exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is this light rated for?\u003c\/strong\u003e The NV3012SSG-7 is rated for boats up to 65.6 feet (20 meters) in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of?\u003c\/strong\u003e The lens on the NV3012SSG-7 is clear polycarbonate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the NV3012SSG-7 mounted?\u003c\/strong\u003e It is a vertical surface-mount light with a compact, low-profile footprint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do the LEDs last?\u003c\/strong\u003e The proprietary LED engine in the NV3012SSG-7 is rated for 50,000+ hours of service life, eliminating routine bulb replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the light have a way to check it's working?\u003c\/strong\u003e Yes, the NV3012SSG-7 includes a built-in tell-tale indicator so you can visually confirm operation, along with reverse polarity protection to prevent mis-wiring damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the NV3012SSG-7 weigh?\u003c\/strong\u003e The NV3012SSG-7 weighs 0.2264 pounds and measures 7 x 7 x 7 inches.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989677813979,"sku":"ATT-NV3012SSG-7","price":48.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/NV3012SS__81413.1737865724.500.750.jpg?v=1785188901"},{"product_id":"attwood-nv6lc2-14-7-bi-color-led-navigation-light-pole-14-straight-3-pin-with-task-light","title":"Attwood NV6LC2-14-7 Bi-Color LED Navigation Light Pole, 14 Inch Straight with Task Light","description":"\u003cp\u003eThe Attwood NV6LC2-14-7 is a bi-color LED navigation light pole with a 14 inch straight, 3-pin design that includes an integrated task light. It is part of Attwood's Bi-Color Fast Action Navigation Lights line, built with a flexible, impact-resistant composite pole that lets the light flex out of the way rather than snap when it catches on low-hanging obstacles, making it a practical choice for anglers and hunters moving through tight cover. The lens is impact-resistant polycarbonate, and the pole and lens are water resistant and corrosion\/UV resistant for long-term exposure to marine conditions. The light is finished in a subtle, glare-free black matte that blends with most modern boat deck and helm designs rather than standing out with a glossy shine. As a certified navigation light, the NV6LC2-14-7 meets ISO 19009:2015 requirements, so it can be used as a compliant bi-color (red\/green) navigation light while underway, with the added task light providing extra illumination at the bow for close-up work after dark. The 3-pin base and standard-with-task configuration make it a straightforward swap for boats already wired for a 3-pin navigation light pole. Overall item dimensions are 20 x 5 x 2 inches and the unit weighs 0.3257 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e NV6LC2-14-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e 3-Pin, Standard with Task Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Length:\u003c\/strong\u003e 14 inches, Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Color:\u003c\/strong\u003e Bi-Color\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black matte, glare-free\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Impact-resistant polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Material:\u003c\/strong\u003e Flexible, impact-resistant composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e ISO 19009:2015 certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion\/UV Resistance:\u003c\/strong\u003e Corrosion\/UV resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 20 x 5 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3257 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697016232\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood NV6LC2-14-7?\u003c\/strong\u003e It is a bi-color LED navigation light pole from Attwood, 14 inches long with a straight, 3-pin base and a built-in task light, part number NV6LC2-14-7.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the NV6LC2-14-7 meet navigation light certification standards?\u003c\/strong\u003e Yes, the NV6LC2-14-7 is ISO 19009:2015 certified for use as a bi-color navigation light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pole made of?\u003c\/strong\u003e The NV6LC2-14-7 uses a flexible, impact-resistant composite pole, paired with an impact-resistant polycarbonate lens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this light waterproof?\u003c\/strong\u003e The NV6LC2-14-7 is water resistant, and it is also built to resist corrosion and UV exposure for ongoing marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the finish?\u003c\/strong\u003e It has a subtle, glare-free black matte finish designed to complement modern boat deck and helm designs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the NV6LC2-14-7?\u003c\/strong\u003e Item dimensions for the Attwood NV6LC2-14-7 are 20 x 5 x 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this light pole weigh?\u003c\/strong\u003e The NV6LC2-14-7 weighs 0.3257 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the NV6LC2-14-7 include a task light?\u003c\/strong\u003e Yes, this is the Standard with Task variant, so it includes an integrated task light in addition to the bi-color navigation light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 3-pin base mean for installation?\u003c\/strong\u003e The NV6LC2-14-7 uses a 3-pin base, matching boats already wired for a standard 3-pin navigation light pole connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs assembly required for this light pole?\u003c\/strong\u003e No, the Attwood NV6LC2-14-7 does not require assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the NV6LC2-14-7 different from the 10 inch version?\u003c\/strong\u003e The NV6LC2-14-7 has a 14 inch straight pole, while Attwood's 10 inch straight version (NV6LC2-10-7) is a shorter pole in the same Bi-Color Fast Action line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho is this light pole designed for?\u003c\/strong\u003e Attwood designed the flexible NV6LC2-14-7 pole to be maneuvered through low-hanging obstacles, making it well suited to anglers and hunters as well as general boaters.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989678010587,"sku":"ATT-NV6LC2-14-7","price":62.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Attwood_14inch_Straight_3_Pin_Pole_Light_With_Task_Light__82845.1722486516.500.750.jpg?v=1785187999"},{"product_id":"attwood-lightarmor-nv6lc1-14bp7-14-in-bi-color-led-pole-navigation-light-1-mile-225-deg-boats-to-39-4-ft","title":"Attwood NV6LC1-14BP7 LED Bi-Color Stowaway Sidelight, 14 Inch Pole, 2-Pin Plug-In Base","description":"\u003cp\u003eThe Attwood NV6LC1-14BP7 is a bi-color stowaway navigation sidelight from the 5090 Series 1-Mile Sidelights line, built for bow mounting on boats up to 39.4 feet (12 meters). The light head sits atop a 14 inch anodized aluminum pole, raising it above trolling motors, anchors, and other bow equipment for clear visibility while underway. It delivers 1-mile, 225-degree light visibility and ships with a 9-watt wedge base lamp already installed.\u003c\/p\u003e\u003cp\u003eThe light head is removable from its base for stowage when not needed, so it will not interfere with fishing or anchoring at the bow. It connects through a 2-pin plug-in base with a locking collar pole for a secure, quick-release fit. The unit uses an LED light source and carries an IP67 water-resistance rating for reliable performance in wet marine conditions. It is a universal fit accessory suited to a wide range of boats using compatible pole-mount sidelight bases.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e NV6LC1-14BP7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 5090 Series 1-Mile Sidelights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bi-Color Stowaway Pole Sidelight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Visibility Range:\u003c\/strong\u003e 1 mile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam Angle:\u003c\/strong\u003e 225 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Length Capacity:\u003c\/strong\u003e Up to 39.4 feet (12 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Lamp:\u003c\/strong\u003e 9-watt wedge base lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Length:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Material:\u003c\/strong\u003e Anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase\/Connector:\u003c\/strong\u003e 2-pin plug-in base with locking collar pole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e IP67 rated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 18 x 5 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6041 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Taiwan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697021625\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for boats up to 39.4 feet (12 meters) in length as a universal-fit, pole-mounted bow sidelight.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood NV6LC1-14BP7?\u003c\/strong\u003e It is a bi-color stowaway navigation sidelight from Attwood's 5090 Series 1-Mile Sidelights line, mounted on a 14 inch anodized aluminum pole with a 2-pin plug-in base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat sizes is the NV6LC1-14BP7 rated for?\u003c\/strong\u003e This sidelight is rated for boats up to 39.4 feet (12 meters) in length, providing 1-mile, 225-degree light visibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the pole on this sidelight?\u003c\/strong\u003e The NV6LC1-14BP7 uses a 14 inch anodized aluminum pole, which raises the light head above trolling motors, anchors, and other bow equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the light be removed and stowed when not in use?\u003c\/strong\u003e Yes, the light head on the NV6LC1-14BP7 lifts off its base for stowage so it will not interfere with fishing or anchoring at the bow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of lamp does the NV6LC1-14BP7 include?\u003c\/strong\u003e It includes a 9-watt wedge base lamp and uses an LED light source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the NV6LC1-14BP7 water resistant?\u003c\/strong\u003e Yes, it carries an IP67 water-resistance rating, suitable for exposure to marine spray and wet conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connector type does this sidelight use?\u003c\/strong\u003e The NV6LC1-14BP7 connects via a 2-pin plug-in base with a locking collar pole for a secure fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the NV6LC1-14BP7?\u003c\/strong\u003e The item measures 18 x 5 x 3 inches and weighs 0.6041 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the pole made of?\u003c\/strong\u003e The pole on the NV6LC1-14BP7 is anodized aluminum, chosen for durability in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the NV6LC1-14BP7 a universal fit?\u003c\/strong\u003e Yes, Attwood lists the NV6LC1-14BP7 as a universal fit accessory for boats using compatible pole-mount sidelight bases.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the NV6LC1-14BP7 manufactured?\u003c\/strong\u003e The Attwood NV6LC1-14BP7 sidelight is manufactured in Taiwan.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the NV6LC1-14BP7 require assembly?\u003c\/strong\u003e No, the NV6LC1-14BP7 does not require assembly.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989678174427,"sku":"ATT-NV6LC1-14BP7","price":59.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Attwood_Light_Armor_LED_14inch_Bi_Color_Navigation_Light__14403.1722497887.500.750.jpg?v=1785189058"},{"product_id":"attwood-nv6lc1-14-7-led-bi-color-pole-navigation-sidelight-14-straight-2-pin-plug-in","title":"Attwood LightArmor 14 Inch Bi-Color LED Pole Navigation Light, Plug-In 2-Pin, NV6LC1-14-7","description":"\u003cp\u003eThe Attwood LightArmor NV6LC1-14-7 is a 14 inch straight, pole-mounted bi-color LED navigation light built for bow installation on boats. It combines port (red) and starboard (green) illumination in a single LED light engine, delivering 2-mile visibility for safe, compliant running at night or in low-light conditions. The pole is constructed of aluminium with a black finish, giving it a rugged, corrosion-resistant build that stands up to harsh marine environments while raising the light head clear of trolling motors, anchors, and other bow-mounted gear.\u003c\/p\u003e\u003cp\u003eThis light uses a plug-in, locking-collar design that is compatible exclusively with LightArmor 2-pin plug-in bases, allowing the pole to be removed and stowed when not in use so it does not interfere with fishing or anchoring. Installation is tool-free once a compatible LightArmor base is mounted: simply insert and lock the pole in place. The unit runs on 12 volts DC and meets EN\/ISO 19009:2015, ABYC C-5 and A-16, and USCG CFR 183.810 navigation light standards. It ships complete as a 14 inch aluminium pole with the LED pole light installed, ready to plug into its base.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e NV6LC1-14-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e LED Plug-In Sidelight (Bi-Color Navigation Pole Light)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Length:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Style:\u003c\/strong\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Bi-Color (red\/green)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Range:\u003c\/strong\u003e 2 miles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e 2-pin plug-in, compatible exclusively with LightArmor bases\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Aluminium, Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Anodized aluminum pole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance Standards:\u003c\/strong\u003e EN\/ISO 19009:2015, ABYC C-5 \u0026amp; A-16, USCG CFR 183.810\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 14 inch Aluminium Pole, LED Pole Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 20 x 5 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5167 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Warranty:\u003c\/strong\u003e 5 Years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697020765\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for pole-mounted bow installation on boats using a LightArmor 2-pin plug-in base; compatible exclusively with LightArmor bases.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the NV6LC1-14-7 navigation light?\u003c\/strong\u003e The NV6LC1-14-7 has a 14 inch straight pole, with overall item dimensions of 20 x 5 x 2 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this light show both red and green at once?\u003c\/strong\u003e Yes, it is a bi-color LED light engine that displays red (port) and green (starboard) navigation colors from a single 14 inch pole, visible up to 2 miles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat base does the NV6LC1-14-7 pole light plug into?\u003c\/strong\u003e This pole light uses a 2-pin plug-in connector with a locking collar that is compatible exclusively with LightArmor plug-in bases; it is not designed to work with other base styles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the pole be removed and stowed when not in use?\u003c\/strong\u003e Yes, the LightArmor NV6LC1-14-7 pole unplugs from its base for stowage, so it will not get in the way of fishing or anchoring when it is not needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the NV6LC1-14-7 pole made of?\u003c\/strong\u003e The pole is anodized aluminum, finished in aluminium and black, giving it a durable, corrosion-resistant build for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this navigation light run on?\u003c\/strong\u003e It operates on a standard 12 volt DC boat electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the NV6LC1-14-7 meet navigation light regulations?\u003c\/strong\u003e Yes, it meets EN\/ISO 19009:2015, ABYC C-5 and A-16, and USCG CFR 183.810 standards for compliant boat navigation lighting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the NV6LC1-14-7 weigh?\u003c\/strong\u003e The complete pole light assembly weighs 0.5167 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the NV6LC1-14-7?\u003c\/strong\u003e The package includes the 14 inch aluminium pole and the bi-color LED pole light head; a LightArmor base is required separately for mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs any assembly required to install this light?\u003c\/strong\u003e No, the NV6LC1-14-7 requires no assembly; it plugs directly into a compatible LightArmor 2-pin base and locks in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this light waterproof?\u003c\/strong\u003e Yes, the NV6LC1-14-7 is built with a waterproof design suited to open marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty does Attwood provide on this navigation light?\u003c\/strong\u003e Attwood backs the NV6LC1-14-7 with a 5 year manufacturer warranty.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989678272731,"sku":"ATT-NV6LC1-14-7","price":50.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3592__48907.1722489489.500.750.jpg?v=1785188188"},{"product_id":"attwood-nv2012pbg-7-lightarmor-deck-mount-led-sidelight-green-starboard-round-1-nm-for-boats-to-39-4-ft-12-m","title":"Attwood LightArmor NV2012PBG-7 2NM Green Starboard Deck-Mount LED Navigation Sidelight","description":"\u003cp\u003eThe attwood LightArmor NV2012PBG-7 is a deck-mounted LED navigation sidelight for the starboard side of the boat, identified by its round green lens. It delivers 2 nautical mile (2NM) visibility and meets ABYC C-5 \u0026amp; A-16 and USCG CFR 183.81 navigation lighting standards, making it suitable for boats that need to display a compliant starboard running light. The light uses attwood's proprietary modular LED light engine, providing consistent, low-power-draw brightness in a low-profile housing designed to sit flush against the deck.\u003c\/p\u003e\u003cp\u003eThe housing is a durable black composite construction engineered to resist corrosion, UV damage, and harsh weather exposure, making it appropriate for both freshwater and saltwater use. The lens is green plastic, which marks this fixture for starboard-side mounting under standard navigation light color convention (green = starboard, red = port). This is a single sidelight, not a pair, so a boat requiring both sides needs the matching red port-side fixture (a separate part number) in addition to this one. Installation is designed to be straightforward for deck mounting, and no additional assembly is required out of the box.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e NV2012PBG-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Starboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Range:\u003c\/strong\u003e 2 nautical miles (2NM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Deck mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e ABYC C-5 \u0026amp; A-16, USCG CFR 183.81\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6 x 5 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697012661\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e LED Deck Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Warranty:\u003c\/strong\u003e 5 Years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the NV2012PBG-7 a port or starboard light?\u003c\/strong\u003e The NV2012PBG-7 is a starboard-side sidelight, identified by its green lens under standard navigation light color convention. The matching red port-side fixture is a separate part number, so order both if your boat needs a complete pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the visibility range of this sidelight?\u003c\/strong\u003e This attwood sidelight provides 2 nautical mile (2NM) visibility, meeting the range required for compliant navigation lighting on applicable boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the NV2012PBG-7 meet USCG and ABYC standards?\u003c\/strong\u003e Yes, it meets ABYC C-5 \u0026amp; A-16 and USCG CFR 183.81 standards for navigation lighting compliance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this light?\u003c\/strong\u003e The attwood NV2012PBG-7 measures 6 x 5 x 3 inches as a complete deck-mounted unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the NV2012PBG-7 weigh?\u003c\/strong\u003e It weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the housing made of?\u003c\/strong\u003e The housing is a durable black composite construction designed to resist corrosion, UV damage, and harsh weather exposure in freshwater or saltwater use. The lens itself is plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this light mounted?\u003c\/strong\u003e The NV2012PBG-7 is a deck-mounted light with a low-profile design intended to sit flush against the deck surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs any assembly required?\u003c\/strong\u003e No, the NV2012PBG-7 does not require assembly and is ready to install as received.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The package includes one LED deck light unit (the NV2012PBG-7 sidelight itself).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the green and red versions of this light?\u003c\/strong\u003e The green lens version (NV2012PBG-7) is for the starboard side, while the red lens version is a separate part number for the port side. They are not interchangeable and should not both be installed on the same side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this light?\u003c\/strong\u003e The attwood NV2012PBG-7 is backed by a 5-year manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use just one of these lights, or do I need a matching pair?\u003c\/strong\u003e The NV2012PBG-7 is sold as a single starboard sidelight. A boat requiring full navigation lighting also needs the corresponding red port-side fixture, which is a different part number.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989678797019,"sku":"ATT-NV2012PBG-7","price":38.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Attwood_LED_Starboard_Sidelight__25432.1722516509.500.750.jpg?v=1785188508"},{"product_id":"perko-0070dp1clr-12v-15w-festoon-bulb-double-ended-navigation-light-replacement-bulb-pair","title":"Perko 0070DP1CLR 12 Volt 15 Watt Festoon Bulb for 112.5 Degree Navigation Lights, Pair","description":"\u003cp\u003eThe Perko 0070DP1CLR is a 12-volt, 15-watt double-ended festoon bulb designed to power Perko 112.5 degree navigation light fixtures (Fig. 0259). It is the specified 12-volt replacement bulb for these lens assemblies, drawing 0.97 amps and measuring 1-11\/16 inches in overall bulb length with a 9\/16 inch bulb diameter. The double-ended festoon design seats into standard festoon-style sockets used in Perko navigation and accessory light housings.\u003c\/p\u003e\u003cp\u003eSold as a pair, these bulbs are a straightforward maintenance item for boat owners keeping their bow, stern, or all-round navigation lights compliant and visible. Built from standard incandescent bulb materials for reliable illumination, they are intended as a like-for-like replacement when an existing festoon bulb burns out or dims. Confirm your fixture calls for a 12-volt festoon bulb of this size before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0070DP1CLR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Type:\u003c\/strong\u003e Double-ended festoon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 15 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 0.97 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Diameter:\u003c\/strong\u003e 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Length:\u003c\/strong\u003e 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Pair (2 bulbs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.02 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsed With:\u003c\/strong\u003e Perko 112.5 degree navigation light lens, Fig. 0259 (4-1\/4 inch x 4 inch)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePerko 112.5 degree navigation light fixtures using the Fig. 0259 lens (4-1\/4 inch x 4 inch), 12-volt version\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the Perko 0070DP1CLR bulb?\u003c\/strong\u003e The 0070DP1CLR is a 12-volt bulb, rated at 15 watts and drawing 0.97 amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bulbs come in an order?\u003c\/strong\u003e The 0070DP1CLR is sold as a pair, so each order includes two 12-volt 15-watt festoon bulbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Perko 0070DP1CLR bulb?\u003c\/strong\u003e It measures 1-11\/16 inches in overall bulb length with a 9\/16 inch bulb diameter, a standard double-ended festoon size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of bulb socket does this fit?\u003c\/strong\u003e The 0070DP1CLR is a double-ended festoon bulb, meaning it seats into a festoon-style socket with contacts at both ends rather than a screw or bayonet base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Perko navigation light uses the 0070DP1CLR bulb?\u003c\/strong\u003e This 12-volt bulb is the specified replacement bulb for Perko's 112.5 degree navigation light lens, Fig. 0259, which measures 4-1\/4 inch x 4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a 24-volt or 32-volt version of this bulb?\u003c\/strong\u003e The 0070DP1CLR is the 12-volt version for the Fig. 0259 lens; Perko lists separate bulb part numbers for 24-volt and 32-volt fixtures using the same lens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 0070DP1CLR weigh?\u003c\/strong\u003e The pair of Perko 0070DP1CLR festoon bulbs weighs 0.02 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my navigation light needs this bulb?\u003c\/strong\u003e Check that your fixture uses a 4-1\/4 inch x 4 inch Fig. 0259 lens rated for 112.5 degrees and runs on a 12-volt system before ordering the 0070DP1CLR.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 0070DP1CLR a genuine Perko part?\u003c\/strong\u003e Yes, 0070DP1CLR is Perko's own manufacturer part number for this 12-volt 15-watt festoon replacement bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this bulb installed?\u003c\/strong\u003e As a double-ended festoon bulb, the 0070DP1CLR simply presses into place between the two spring contacts of the festoon socket in the light fixture, with no threading or twisting needed.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991097323739,"sku":"PKO-70DP1CLR","price":15.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/070-Festoon-Bulb__10218.1722517778.500.750.jpg?v=1785188053"},{"product_id":"perko-0201dp0wht-white-360-degree-all-round-light-lens-fits-1400-1401-1403-1404-1611-1134-1137-series","title":"Perko 0201DP0WHT White Replacement Globe Lens for 1611 Telescoping All-Round Lights","description":"\u003cp\u003eThe Perko 0201DP0WHT is a replacement globe\/lens built for Perko's 1611 Telescoping Series all-round light, restoring a cracked, yellowed, or missing lens without replacing the entire fixture. It is molded in white polymer and stands 3 inches tall, matching the original factory globe dimensions so it seats directly onto the existing telescoping base and bulb assembly. The lens is designed to hold up to sun, saltwater spray, and marine UV exposure over repeated seasons on deck.\u003c\/p\u003e\u003cp\u003eThis globe is the correct replacement for the FIG. 1611 telescoping light configuration, which also uses the 0337012DP bulb and the 1059T00DP telescoping base as separate service parts. Perko's 360-degree all-round lens design is also used across several other Perko fixture families, including the 1400 Alpha Retail Series, 1401 OEM Series, 1403\/1404 OEM Series, and 1134\/1137 folding light series, so boat owners servicing any of these fixtures should confirm their light's series before ordering. Always check the fixture manufacturer's fitment guidance to ensure a proper fit before installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0201DP0WHT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polymer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 6.75 x 4 x 2.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.0875 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226023736\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Fixture Series:\u003c\/strong\u003e Perko 1611 Telescoping Series\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePerko 1611 Telescoping Series all-round lights\u003c\/li\u003e\n\u003cli\u003eAlso compatible with Perko 1400 Alpha Retail Series, 1401 OEM Series, 1403\/1404 OEM Series, and 1134\/1137 folding light series fixtures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat fixture does the Perko 0201DP0WHT lens fit?\u003c\/strong\u003e The 0201DP0WHT is the globe\/lens for Perko's 1611 Telescoping Series all-round light, and it is also used on Perko's 1400 Alpha Retail Series, 1401 OEM Series, 1403\/1404 OEM Series, and 1134\/1137 folding light series fixtures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the bulb or the lens?\u003c\/strong\u003e 0201DP0WHT is the globe\/lens only, not the bulb. For the matching 1611 series light, the bulb is a separate part (0337012DP) and the telescoping base is also sold separately (1059T00DP).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 0201DP0WHT globe?\u003c\/strong\u003e It is white, as indicated by the WHT suffix in the Perko part number 0201DP0WHT.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the lens made from?\u003c\/strong\u003e The Perko 0201DP0WHT globe is molded from polymer, chosen for its durability in marine sun and saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow tall is the 0201DP0WHT globe?\u003c\/strong\u003e The globe measures 3 inches in height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko 0201DP0WHT lens waterproof?\u003c\/strong\u003e Yes, the 0201DP0WHT globe is built as a waterproof component for use in an all-round boat light fixture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 0201DP0WHT globe weigh?\u003c\/strong\u003e The Perko 0201DP0WHT globe weighs 0.0875 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this replace the entire light fixture?\u003c\/strong\u003e No, 0201DP0WHT is a replacement globe\/lens only for the 1611 Telescoping Series light; the base and bulb are ordered as separate parts if they also need replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this lens fit my 1400 or 1401 series Perko light?\u003c\/strong\u003e Yes, in addition to the 1611 Telescoping Series, the 0201DP0WHT globe is also compatible with Perko's 1400 Alpha Retail Series, 1401 OEM Series, and 1403\/1404 OEM Series lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 0201DP0WHT?\u003c\/strong\u003e This listing includes one Perko 0201DP0WHT white replacement globe\/lens; the bulb and telescoping base are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 0201DP0WHT genuine Perko or aftermarket?\u003c\/strong\u003e The 0201DP0WHT is a genuine Perko replacement part, identified by Perko's own part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the package size for the 0201DP0WHT globe?\u003c\/strong\u003e The packaged item measures 6.75 x 4 x 2.25 inches.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991097520347,"sku":"PKO-201DPWHT","price":15.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-201DPWHT_lg__97216.1558116624.500.750.jpg?v=1785188740"},{"product_id":"perko-0228dp0chr-horizontal-mount-bi-color-side-light-chrome-uscg-certified-for-power-vessels-under-65-6-ft-20-m","title":"Perko 0228DP0CHR Horizontal Mount Bi-Color Side Light, Chrome Finish","description":"\u003cp\u003eThe Perko 0228DP0CHR is a horizontal-mount bi-color side light that combines red and green navigation lenses into a single low-profile housing. It is certified for use on power driven vessels under 65.6 feet (20 meters) in length, making it a standard choice for the running-light requirements of most recreational boats.\u003c\/p\u003e\u003cp\u003eThe light features a chrome-plated zinc alloy top mounted on a black plastic base, giving it a durable, corrosion-resistant finish suited to marine environments while keeping the base lightweight. It runs on a 12 volt system, uses an incandescent light source, and is built waterproof for continuous exposure on deck. The compact housing measures 3-1\/4 inches in length, 2-5\/16 inches in width, and 5\/8 inches in vertical height, making it easy to fit into horizontal mounting locations on the bow or cabin where a low-profile light is needed.\u003c\/p\u003e\u003cp\u003eAs a bi-color unit, the 0228DP0CHR shows red to port and green to starboard from a single fixture, simplifying installation compared to running separate port and starboard lights. Installation instructions and technical drawings for this light are available directly from Perko.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0228DP0CHR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Bi-Color (Red\/Green)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome-plated zinc alloy top\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Material:\u003c\/strong\u003e Black plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2-5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Height:\u003c\/strong\u003e 5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e Incandescent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Colors:\u003c\/strong\u003e Red, Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVessel Length Certification:\u003c\/strong\u003e Under 65.6 feet (20 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e PKO0228DP0CHR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eCertified for power driven vessels under 65.6 feet (20 meters) in length.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePKO0228DP0CHR\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Perko 0228DP0CHR side light certified for?\u003c\/strong\u003e The 0228DP0CHR is certified for use on power driven vessels under 65.6 feet (20 meters) in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this side light?\u003c\/strong\u003e The Perko 0228DP0CHR measures 3-1\/4 inches in length, 2-5\/16 inches in width, and 5\/8 inches in vertical height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing made of?\u003c\/strong\u003e It has a chrome-plated zinc alloy top mounted on a black plastic base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 0228DP0CHR show both red and green light?\u003c\/strong\u003e Yes, it is a bi-color light, displaying red and green from a single horizontal-mount housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 0228DP0CHR run on?\u003c\/strong\u003e This side light operates on a 12 volt system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko 0228DP0CHR waterproof?\u003c\/strong\u003e Yes, the 0228DP0CHR is built waterproof for marine deck use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of bulb does it use?\u003c\/strong\u003e The 0228DP0CHR uses an incandescent light source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 0228DP0CHR weigh?\u003c\/strong\u003e It weighs 0.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent part number for the 0228DP0CHR?\u003c\/strong\u003e Yes, the OEM equivalent part number is PKO0228DP0CHR.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this light mounted horizontally or vertically?\u003c\/strong\u003e The 0228DP0CHR is a horizontal-mount side light, designed for a low-profile installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I find installation instructions for the 0228DP0CHR?\u003c\/strong\u003e Installation instructions and technical drawings for the 0228DP0CHR are available directly from Perko.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991097553115,"sku":"PKO-0228DP0CHR","price":96.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-0228DP0CHR__38738.1722371388.500.750.jpg?v=1785189087"},{"product_id":"perko-0227dp0chr-bi-color-bow-navigation-light-horizontal-mount-chrome-top-certified-for-power-vessels-to-65-6-ft","title":"Perko 0227DP0CHR Horizontal-Mount Bi-Color Navigation Light, Chrome-Plated","description":"\u003cp\u003eThe Perko 0227DP0CHR is a horizontal-mount bi-color navigation light designed for the bow of small to mid-size power driven vessels. A single chrome-plated zinc alloy housing combines red and green lenses in one fixture, giving other vessels the correct port and starboard signal from dead ahead without the need for two separate side lights. The unit is certified for use on power driven vessels under 20 meters (65.6 feet) in length, making it suitable for the great majority of recreational runabouts, center consoles, and cruisers.\u003c\/p\u003e\u003cp\u003eConstruction pairs a chrome-plated zinc alloy top with a black plastic base and socket assembly, and the lenses themselves are glass rather than plastic for better long-term clarity and UV resistance. The light ships with 12-volt bulbs already installed, so it is ready to wire in without a separate bulb purchase. At 3-1\/4 inches long, 2-5\/16 inches wide, and 5\/8 inch high, the low-profile housing mounts flush to the deck or bow pulpit with minimal windage. Replacement components, including the bulb, lens, and base with socket assembly, are individually available should any single part need service down the road, so the whole fixture does not need to be replaced for a burned-out bulb or a cracked lens.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0227DP0CHR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Horizontal-Mount Bi-Color Navigation Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome-plated zinc alloy top\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Material:\u003c\/strong\u003e Black plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Glass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Colors:\u003c\/strong\u003e Red and green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Style:\u003c\/strong\u003e Horizontal mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3-1\/4 inches length x 2-5\/16 inches width x 5\/8 inch height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.29 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 10 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Included:\u003c\/strong\u003e Yes, 12-volt bulb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e Certified for use on power driven vessels under 20 meters (65.6 feet) in length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226056758\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Warranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for power driven vessels under 20 meters (65.6 feet) in length; not restricted to a specific make or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eCross-references to PER0227DP0CHR.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 0227DP0CHR used for?\u003c\/strong\u003e It is a horizontal-mount bi-color navigation light for the bow of a power driven vessel, combining red and green lenses in one chrome-plated fixture so the boat displays the correct port and starboard signal from a single housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bulb included with this light?\u003c\/strong\u003e Yes, the Perko 0227DP0CHR ships with a 12-volt bulb already installed, so it is ready to wire in without buying a bulb separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size vessel is this navigation light certified for?\u003c\/strong\u003e The 0227DP0CHR is certified for use on power driven vessels under 20 meters (65.6 feet) in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 0227DP0CHR?\u003c\/strong\u003e The light measures 3-1\/4 inches long, 2-5\/16 inches wide, and 5\/8 inch high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 0227DP0CHR weigh?\u003c\/strong\u003e This light weighs 0.29 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing made of?\u003c\/strong\u003e The 0227DP0CHR has a chrome-plated zinc alloy top paired with a black plastic base, and the lenses are glass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the bulb or lens be replaced separately if it fails?\u003c\/strong\u003e Yes. The bulb (part number 0071DP0CLR), the lens (part number 0227DP0LNS), and the black base with socket assembly (part number 022700099A) are each available individually, so a single failed component does not require replacing the whole 0227DP0CHR fixture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and wattage does this light run on?\u003c\/strong\u003e The Perko 0227DP0CHR runs on 12 volts and uses a 10-watt bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Perko part?\u003c\/strong\u003e Yes, the 0227DP0CHR is a genuine Perko bi-color navigation light, not an aftermarket copy, and it carries a 90-day manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this light mount horizontally or vertically?\u003c\/strong\u003e The 0227DP0CHR is a horizontal-mount light, designed to sit flush on a horizontal surface such as a bow deck or pulpit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat colors are the lenses?\u003c\/strong\u003e The 0227DP0CHR has red and green lenses combined in one bi-color housing, showing the port (red) and starboard (green) signal from a single fixture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a white or black base option?\u003c\/strong\u003e The 0227DP0CHR chrome model uses a black plastic base with socket assembly (part number 022700099A); a white base with socket assembly is offered as a separate component for other configurations.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991097651419,"sku":"PKO-227DP0CHR","price":48.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-0227DPOCHR_lg__84640.1558116691.500.750.jpg?v=1785188850"},{"product_id":"perko-0170wsddp1-green-side-navigation-light-12v-white-polymer-2nm-vessels-under-20m","title":"Perko 0170WSDDP1 Green Side Light with White Polymer Base, 12V Boat Navigation Light","description":"\u003cp\u003eThe Perko 0170WSDDP1 is a 12V green side navigation light built with a white polymer base and a green polymer lens, designed as a colored side navigation light on sail or power driven vessels under 20 meters (65.6 feet) in length. The light shows a visibility arc of 112-1\/2 degrees and is rated for 2 miles of visibility, meeting the standard arc and range needed for a vessel's colored side light. It measures 4-1\/8 inches in overall width with a 2-1\/2 inch overall projection and a 3-5\/8 inch overall height, and it mounts using number 10 screws.\u003c\/p\u003e\u003cp\u003eConstruction is a durable white polymer housing paired with a green plastic lens, built to resist the elements in a marine environment. The light runs on 12 volts and is rated at 3 watts, and it includes the 12V incandescent bulb needed to operate right out of the box, so no separate bulb purchase is required. This is a genuine Perko-manufactured unit, not a generic aftermarket copy, made for boat owners who need a reliable, code-compliant green side light for their vessel's navigation lighting setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0170WSDDP1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Type:\u003c\/strong\u003e Side Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Color\/Material:\u003c\/strong\u003e White Polymer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 3 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb:\u003c\/strong\u003e 12V incandescent bulb included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Arc:\u003c\/strong\u003e 112-1\/2 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Range:\u003c\/strong\u003e 2 miles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Width:\u003c\/strong\u003e 4-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Projection:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height:\u003c\/strong\u003e 3-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Size:\u003c\/strong\u003e #10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226022401\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eCertified for use on sail or power driven vessels under 20 meters (65.6 feet) in length\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the lens on the Perko 0170WSDDP1?\u003c\/strong\u003e The lens is green, paired with a white polymer base, on this Perko side navigation light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bulb included with this light?\u003c\/strong\u003e Yes, the Perko 0170WSDDP1 includes its 12V incandescent bulb, so it is ready to install without buying a separate bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and wattage does the 0170WSDDP1 run on?\u003c\/strong\u003e This light operates on 12 volts and is rated at 3 watts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the visibility range and arc of this side light?\u003c\/strong\u003e The Perko 0170WSDDP1 has a visibility arc of 112-1\/2 degrees and a rated visibility range of 2 miles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat vessel sizes is this light certified for?\u003c\/strong\u003e It is certified for use on sail or power driven vessels under 20 meters (65.6 feet) in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 0170WSDDP1?\u003c\/strong\u003e Overall width is 4-1\/8 inches, overall projection is 2-1\/2 inches, and overall height is 3-5\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this light weigh?\u003c\/strong\u003e The Perko 0170WSDDP1 weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the housing made from?\u003c\/strong\u003e The base is constructed of white polymer with a green plastic lens, making the 0170WSDDP1 a durable, weather-resistant marine light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat screw size is needed to mount this light?\u003c\/strong\u003e The Perko 0170WSDDP1 uses #10 screws for mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Perko part or an aftermarket copy?\u003c\/strong\u003e The 0170WSDDP1 is a genuine Perko-manufactured navigation light, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Perko light?\u003c\/strong\u003e The UPC for the Perko 0170WSDDP1 is 085226022401.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991097684187,"sku":"PKO-0170WSDDP1","price":41.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-0170WSDDP1__20178.1722366830.500.750.jpg?v=1785188463"},{"product_id":"perko-0170wp0dp1-red-side-light-white-polymer-12v-navigation-light-for-boats-to-20-meters","title":"Perko 0170WP0DP1 Navigation Side Light, White Polymer Base with Red Lens, 12 Volt","description":"\u003cp\u003eThe Perko 0170WP0DP1 is a 12 volt navigation side light built with a white polymer housing and a red lens. It is certified for use on sail or power driven vessels under 20 meters (65.6 feet) in length, making it a standard choice for boat owners who need a compliant, durable running light. The polymer construction resists the corrosion and UV breakdown that can affect painted or metal housings, so the light holds up to ongoing exposure to sun, salt spray, and moisture. A 12 volt incandescent bulb is included, so the light is ready to wire in and use without sourcing a separate bulb.\u003c\/p\u003e\u003cp\u003eThe compact housing measures 4-1\/8 inches in overall width with a 2-1\/2 inch overall projection from the mounting surface, and secures with #10 screws. The 12 volt rating matches standard small-craft electrical systems, and the red polymer lens is built for reliable, consistent light output at night or in low visibility conditions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0170WP0DP1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Navigation Side Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polymer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 1.5 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e Incandescent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Overall:\u003c\/strong\u003e 4-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProjection Overall:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height:\u003c\/strong\u003e 3-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Size:\u003c\/strong\u003e #10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Included:\u003c\/strong\u003e Yes, 12V bulb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e Certified for vessels under 20 meters (65.6 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the lens on the Perko 0170WP0DP1?\u003c\/strong\u003e The lens is red, mounted in a white polymer housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 0170WP0DP1 include a bulb?\u003c\/strong\u003e Yes, a 12 volt bulb is included with the Perko 0170WP0DP1, so it is ready to install without buying a bulb separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this Perko side light run on?\u003c\/strong\u003e The 0170WP0DP1 is a 12 volt light with a 1.5 watt incandescent bulb, matching standard small-craft electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko 0170WP0DP1 certified for use on boats?\u003c\/strong\u003e It is certified for use on sail or power driven vessels under 20 meters (65.6 feet) in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the housing made of?\u003c\/strong\u003e The Perko 0170WP0DP1 has a white polymer housing with a red polymer lens, chosen for its resistance to corrosion and UV exposure compared to metal or painted housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this navigation light?\u003c\/strong\u003e The 0170WP0DP1 measures 4-1\/8 inches in overall width, 2-1\/2 inches in overall projection, and 3-5\/8 inches in overall height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size screws are needed to mount this light?\u003c\/strong\u003e The Perko 0170WP0DP1 mounts with #10 screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 0170WP0DP1 weigh?\u003c\/strong\u003e The Perko 0170WP0DP1 weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the light source LED or incandescent?\u003c\/strong\u003e The Perko 0170WP0DP1 uses an incandescent 12 volt, 1.5 watt bulb as its light source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Perko 0170WP0DP1?\u003c\/strong\u003e The Perko 0170WP0DP1 ships as a complete white polymer, red lens side light with the 12 volt bulb already included.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991097716955,"sku":"PKO-0170WP0DP1","price":41.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51wF5IR6wnL.jpg?v=1784491464"},{"product_id":"perko-0252wb0dp1-12v-bi-color-bow-navigation-light-white-polymer-with-red-green-lenses-2-nm","title":"Perko 0252WB0DP1 White Bi-Color Navigation Light, 12 Volt","description":"\u003cp\u003eThe Perko 0252WB0DP1 is a 12 volt bi-color navigation light with a white polymer housing and combined red and green lenses. Bi-color lights show red to port and green to starboard from a single fixture, making this style commonly mounted at the bow of small to mid-size power boats. It is certified for use on power driven vessels under 20 meters (65.6 feet) in length. The unit ships complete with a 12 volt bulb installed and gold plated contacts for a corrosion-resistant electrical connection. Construction is a durable white polymer body that resists the effects of sun, salt, and spray better than unfinished metal fittings. The compact housing measures 13\/16 inch in vertical height, 3-1\/2 inches in length, and 2-1\/4 inches in width, allowing it to fit standard bow light mounting locations without extensive modification. Perko builds this light as part of its Fig. 0252 series, which is also offered in a black housing for boat owners who want to match a darker deck hardware scheme. Replacement bulbs (Cat. No. 0071DP0CLR) and a replacement lens (Cat. No. 0247DP0LNS) are available separately, and a matching white base and socket assembly (Cat. No. 0114000WHT) can be sourced if the base ever needs replacing. This is a straightforward direct-fit navigation light for boat builders, repowers, and owners replacing a worn or cracked bi-color unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0252WB0DP1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polymer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Range:\u003c\/strong\u003e 2 nautical miles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVessel Length Certification:\u003c\/strong\u003e Certified for use on power driven vessels under 20 meters (65.6 feet) in length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 13\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Contacts:\u003c\/strong\u003e Gold plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Bulb:\u003c\/strong\u003e 0071DP0CLR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Lens:\u003c\/strong\u003e 0247DP0LNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Base and Socket Assembly:\u003c\/strong\u003e 0114000WHT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226041778\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does bi-color mean on the Perko 0252WB0DP1?\u003c\/strong\u003e Bi-color means the Perko 0252WB0DP1 shows red light to port and green light to starboard from a single fixture, rather than requiring two separate sidelights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 0252WB0DP1 run on?\u003c\/strong\u003e The Perko 0252WB0DP1 is a 12 volt light and ships with its 12 volt bulb already installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a 24 volt version of this light available?\u003c\/strong\u003e Perko's Fig. 0252 housing used for the 0252WB0DP1 can also be set up for 24 volt A.B.Y.C. Applications by installing a 24 volt bulb instead of the standard 12 volt bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 0252WB0DP1?\u003c\/strong\u003e The Perko 0252WB0DP1 measures 13\/16 inch in vertical height, 3-1\/2 inches in length, and 2-1\/4 inches in width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this light weigh?\u003c\/strong\u003e The Perko 0252WB0DP1 weighs 0.15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the light housing made of?\u003c\/strong\u003e The 0252WB0DP1 has a white polymer housing with red and green lenses, giving it good resistance to sun and saltwater exposure compared to unfinished metal housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the visibility range of this navigation light?\u003c\/strong\u003e The Perko 0252WB0DP1 has a visibility range of 2 nautical miles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 0252WB0DP1 certified for use on my boat?\u003c\/strong\u003e Yes, the 0252WB0DP1 is certified for use on power driven vessels under 20 meters (65.6 feet) in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I replace just the bulb or lens instead of the whole light?\u003c\/strong\u003e Yes, Perko sells the replacement bulb for the 0252WB0DP1 as Cat. No. 0071DP0CLR and the replacement lens as Cat. No. 0247DP0LNS, so either can be swapped without replacing the entire fixture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a black version of this light available?\u003c\/strong\u003e Yes, Perko's Fig. 0252 bi-color light is also offered with a black housing for boat owners who prefer a darker finish; the white housing covered here is Cat. No. 0252WB0DP1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 0252WB0DP1?\u003c\/strong\u003e The Perko 0252WB0DP1 ships as a complete white polymer bi-color light fixture with a 12 volt bulb already installed and gold plated electrical contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the base and socket be replaced separately?\u003c\/strong\u003e Yes, Perko offers a matching white base and socket assembly, Cat. No. 0114000WHT, for the 0252WB0DP1 if the base ever needs to be replaced independently of the lens housing.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991101649115,"sku":"PKO-252WB0DP1","price":39.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-252WBDP1_lg__93388.1558116881.500.750.jpg?v=1785188740"},{"product_id":"perko-0248dp0clr-clear-360-degree-lens-for-all-round-navigation-lights-fits-vessels-under-20m-65-6-ft","title":"Perko 0248DP0CLR Clear Fresnel Globe - 360 Degree Lens for All-Round Navigation Lights","description":"\u003cp\u003eThe Perko 0248DP0CLR is a clear Fresnel globe used as a replacement lens for Perko 360 degree all-round navigation lights. This globe is the clear lens component that fits over the bulb and socket assembly on Perko all-round light fixtures, allowing the light to be seen through a full 360 degree arc as required for all-round navigation lighting. It is built from glass for durability in a marine environment and is sized for use on Perko all-round lights installed on vessels under 20 meters (65.6 feet) in length.\u003c\/p\u003e\u003cp\u003eThe 0248DP0CLR globe is listed alongside the Perko Fig. 1209 and Fig. 1330 all-round light bases, and is paired with the 0337011DP bulb in these fixtures. Replacing a cracked, cloudy, or discolored globe restores the light output and appearance of an all-round light without needing to replace the entire fixture. This is a spare part intended for boat owners maintaining existing Perko all-round navigation lights.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0248DP0CLR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Clear Fresnel Globe for All-Round Lights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Glass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6 x 3 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVessel Length Compatibility:\u003c\/strong\u003e Under 20 meters (65.6 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.12 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226023729\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e PER0248DP0CLR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source Type:\u003c\/strong\u003e Incandescent\/Halogen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 20.4 watts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePerko all-round navigation lights using the Fig. 1209 base assembly\u003c\/li\u003e\n\u003cli\u003ePerko all-round navigation lights using the Fig. 1330 base assembly\u003c\/li\u003e\n\u003cli\u003eDesigned for vessels under 20 meters (65.6 feet) in length\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePER0248DP0CLR\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Perko 0248DP0CLR?\u003c\/strong\u003e It is a clear Fresnel globe, the replacement lens used on Perko 360 degree all-round navigation lights, part number 0248DP0CLR.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this globe?\u003c\/strong\u003e The 0248DP0CLR globe is clear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 0248DP0CLR lens made from?\u003c\/strong\u003e This Perko globe is made from glass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 0248DP0CLR globe fit my boat's all-round light?\u003c\/strong\u003e The 0248DP0CLR globe is designed for Perko all-round navigation lights on vessels under 20 meters (65.6 feet) in length, including fixtures using the Fig. 1209 and Fig. 1330 base assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this globe?\u003c\/strong\u003e The Perko 0248DP0CLR measures 6 x 3 x 2 inches overall, with a height of 2.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 0248DP0CLR globe weigh?\u003c\/strong\u003e This Perko replacement globe weighs 0.12 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent number for this part?\u003c\/strong\u003e Yes, the Perko 0248DP0CLR corresponds to OEM equivalent number PER0248DP0CLR.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bulb is used with the 0248DP0CLR globe?\u003c\/strong\u003e The 0248DP0CLR globe is used with the Perko 0337011DP bulb in Fig. 1209 and Fig. 1330 all-round light assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes replacing the globe require replacing the whole light fixture?\u003c\/strong\u003e No, the 0248DP0CLR is a spare globe intended to replace just the lens on an existing Perko all-round light, not the entire fixture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wattage is this globe rated for?\u003c\/strong\u003e The Perko 0248DP0CLR is used on a fixture rated at 20.4 watts with an incandescent\/halogen light source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 0248DP0CLR globe genuine Perko?\u003c\/strong\u003e Yes, part number 0248DP0CLR is a genuine Perko replacement globe, not a generic aftermarket lens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 0248DP0CLR?\u003c\/strong\u003e Ordering the 0248DP0CLR includes one clear Fresnel globe for a Perko all-round navigation light; the bulb, socket, cap, and base are separate Perko parts.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991101747419,"sku":"PKO-248DPCLR","price":16.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-248DPCLR_lg__42283.1558116814.500.750.jpg?v=1785188333"},{"product_id":"perko-0253b00dp1-12v-horizontal-mount-side-lights-black-red-green-navigation-sidelight-pair-for-power-vessels-under-20m","title":"Perko Horizontal-Mount Sidelights, Black, 12 Volt, Red and Green Lens Pair, USCG Certified","description":"\u003cp\u003eThe Perko 0253B00DP1 is a horizontal-mount pair of boat sidelights with a black plastic housing, built for standard navigation lighting on power-driven vessels. The set is sold as a pair and includes both a red lens light and a green lens light, each running on a 12 volt incandescent bulb. Housings and lens covers are plastic, and the electrical contacts are gold plated for reliable current flow in a marine environment. Each light measures 3-1\/2 inches in length by 2-1\/4 inches in width by 13\/16 inch in height, and the pair weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003eThese sidelights are USCG certified for use on power-driven vessels under 20 meters (65.6 feet), making them suitable for standard recreational and small commercial boat installations. The Fig. 0253 design can also be run as a 24-volt A.B.Y.C. A-16 certified light on boats built prior to 11\/1\/2003, provided the stock bulbs are swapped for Cat. No. 0072DP1CLR 24-volt bulbs; contact Perko directly for 24-volt new-construction applications. Replacement lenses, bulbs, and base\/socket assemblies are available separately for long-term maintenance of this fixture.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0253B00DP1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Horizontal-Mount Sidelights Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Colors:\u003c\/strong\u003e Red and Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source Type:\u003c\/strong\u003e Incandescent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContacts:\u003c\/strong\u003e Gold Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 13\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e USCG certified for power-driven vessels under 20 meters (65.6 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair (2 lights, red and green)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Volt Compatibility:\u003c\/strong\u003e Usable as a 24-volt A.B.Y.C. A-16 certified light on boats built prior to 11\/1\/2003 with Cat. No. 0072DP1CLR 24-volt bulbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226041808\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the Perko 0253B00DP1 sidelights?\u003c\/strong\u003e The Perko 0253B00DP1 ships as a pair of horizontal-mount sidelights, one with a red lens and one with a green lens, each with its bulb and black plastic housing installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the Perko 0253B00DP1 lights sold individually or as a pair?\u003c\/strong\u003e They are sold as a pair; the 0253B00DP1 includes both the red lens light and the green lens light together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the housing on the 0253B00DP1 sidelight set?\u003c\/strong\u003e Black. The Perko 0253B00DP1 has a black plastic housing on both lights in the pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Perko 0253B00DP1 run on?\u003c\/strong\u003e 12 volts. The 0253B00DP1 uses a 12-volt incandescent bulb in each light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Perko 0253B00DP1 be converted to run on a 24-volt system?\u003c\/strong\u003e Yes, the Fig. 0253 design can be used as a 24-volt A.B.Y.C. A-16 certified light on boats built prior to 11\/1\/2003 if the stock bulbs are replaced with Cat. No. 0072DP1CLR 24-volt bulbs; for 24-volt new-construction applications, contact Perko directly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko 0253B00DP1 sidelight pair USCG certified?\u003c\/strong\u003e Yes, it is USCG certified for use on power-driven vessels under 20 meters (65.6 feet).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of each Perko 0253B00DP1 sidelight?\u003c\/strong\u003e Each light in the 0253B00DP1 pair measures 3-1\/2 inches long by 2-1\/4 inches wide by 13\/16 inch high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the lenses made of on the 0253B00DP1?\u003c\/strong\u003e The lenses are plastic, matching the plastic housing used throughout the Perko 0253B00DP1 sidelight pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Perko 0253B00DP1 sidelight pair weigh?\u003c\/strong\u003e 0.3 pounds for the pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat replacement lenses and bulbs fit the Perko 0253B00DP1?\u003c\/strong\u003e Perko lists a green lens (0273DPGLNS), a red lens (0273DPRLNS), and a bulb (0071DP0CLR) as spare parts for the Fig. 0253 sidelight, along with a base with socket assembly (0114000BLK\/WHT), so the 0253B00DP1 can be serviced without replacing the whole unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the Perko 0253B00DP1 sidelights have gold-plated contacts?\u003c\/strong\u003e Yes, the electrical contacts on the 0253B00DP1 are gold plated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko 0253B00DP1 an original Perko part?\u003c\/strong\u003e Yes, 0253B00DP1 is the Perko manufacturer part number for this horizontal-mount black sidelight pair.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991101812955,"sku":"PKO-0253B00DP1","price":76.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-0253B00DP1__48885.1722517490.500.750.jpg?v=1785188542"},{"product_id":"perko-0254b00dp1-vertical-mount-side-lights-black-red-green-sidelights-for-power-driven-vessels-under-20m","title":"Perko Vertical Mount Side Lights 0254B00DP1, Black Plastic, 12 Volt Pair with Red and Green Lenses","description":"\u003cp\u003eThe Perko 0254B00DP1 is a vertical mount side light set built in black plastic for boat navigation lighting. Sold in pairs, the set includes both the red and green lenses needed for port and starboard navigation lighting on a single vessel, along with 12 Volt bulbs already installed so the lights are ready to wire in. The compact vertical mount housing measures 3-1\/2 inches long by 2-1\/4 inches wide with an overall projection of 7\/8 inch, making it suited to smaller helm and bow rail installations where a low-profile fixture is needed.\u003c\/p\u003e\u003cp\u003eThis light is ABYC A-16 certified for use on boats built prior to 11\/1\/03, and it is rated for Power Driven Vessels under 20 meters (65.6 feet) in length. The same Fig. 0254 housing can also be run as a 24-volt ABYC A-16 certified light on boats built prior to 11\/1\/03 by swapping in the 0072DP8CLR bulb; new construction 24-volt applications should be confirmed before installation. Perko offers replacement lenses, bulbs, and a base and socket assembly separately, so individual components can be serviced without replacing the entire fixture.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0254B00DP1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Colors:\u003c\/strong\u003e Red and Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Voltage:\u003c\/strong\u003e 12 Volt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulbs Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Vertical Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProjection:\u003c\/strong\u003e 7\/8 inch overall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e ABYC A-16 certified for boats built prior to 11\/1\/03\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVessel Length Rating:\u003c\/strong\u003e Under 20 meters (65.6 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226041853\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the Perko 0254B00DP1 include both port and starboard lights?\u003c\/strong\u003e Yes, the Perko 0254B00DP1 is sold in pairs and includes both a red lens and a green lens, covering port and starboard navigation lighting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre bulbs included with this side light set?\u003c\/strong\u003e 12 Volt bulbs are included with the Perko 0254B00DP1 vertical mount side lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Perko 0254B00DP1?\u003c\/strong\u003e The housing measures 3-1\/2 inches long by 2-1\/4 inches wide, with an overall projection of 7\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Perko 0254B00DP1 made of?\u003c\/strong\u003e This side light set is made of plastic, matching the black finish of the 0254B00DP1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko 0254B00DP1 ABYC certified?\u003c\/strong\u003e Yes, this light is ABYC A-16 certified for use on boats built prior to 11\/1\/03.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size vessel is this light rated for?\u003c\/strong\u003e The Perko 0254B00DP1 is rated for Power Driven Vessels under 20 meters (65.6 feet) in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Perko 0254B00DP1 be wired for 24 volts?\u003c\/strong\u003e The Fig. 0254 housing used for the 0254B00DP1 can be run as a 24-volt ABYC A-16 certified light on boats built prior to 11\/1\/03 by replacing the bulbs with part 0072DP8CLR; new construction 24-volt use should be confirmed before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these lights sold individually or as a pair?\u003c\/strong\u003e The 0254B00DP1 is sold in pairs, not individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just a replacement lens for the 0254B00DP1?\u003c\/strong\u003e Yes, a green lens only is available as part 0277DPGLNS and a red lens only as part 0277DPRLNS for this Fig. 0254 light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a replacement bulb available for this light?\u003c\/strong\u003e Yes, the 12 Volt bulb for the Perko 0254B00DP1 is available separately as part 0071DP8CLR.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the base and socket be replaced separately from the housing?\u003c\/strong\u003e Yes, a base with socket assembly is available separately as part 0254(BLK\/WHT)99A for the Fig. 0254 light line that includes the 0254B00DP1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this light come in a color other than black?\u003c\/strong\u003e The 0254B00DP1 is the black plastic version; Perko also makes this same Fig. 0254 vertical mount side light in white plastic as a separate part.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991101845723,"sku":"PKO-254BOODP1","price":78.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51S-TCF0mzL.jpg?v=1784491507"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/battery-operated-led-bow-light-combination-kit-1148200845340.jpg?v=1785359985","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-lighting-navigation-lights.oembed?page=4","provider":"Good Vibes Marina","version":"1.0","type":"link"}