{"title":"Spotlights \u0026 Utility Lighting","description":null,"products":[{"product_id":"sea-dog-401320-1-led-utility-light-white-led-with-black-faceplate-12v-delrin-surface-mount","title":"Sea-Dog LED Utility Light 401320-1, White LED with Black Finish, Injection Molded Delrin","description":"\u003cp\u003eThe Sea-Dog 401320-1 is a surface-mount LED utility light built for onboard task and accent lighting. It uses a low amp draw white LED bulb, making it an efficient choice for interior cabin lighting, storage compartments, engine spaces, or any area where a compact, low-draw fixture is needed. The housing is injection molded Delrin, chosen for its strength, heat resistance, and dimensional stability, so the fixture holds up to the vibration and temperature swings common in marine environments. The light has a white lens with a black finish faceplate for a clean, low-profile look against most boat interiors.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the fixture surface mounts using four #6 flat head fasteners, which are not included, so have a set on hand before starting the install. Overall dimensions are compact at roughly 2-3\/16 inches by 1-3\/4 inches by 1-9\/16 inches with an 11\/16 inch mounting depth, so it fits in tight spaces where larger fixtures will not. It runs on a standard 12 volt DC marine electrical system, matching the voltage found on most boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 401320-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e LED Utility Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Delrin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (A x B x C x D):\u003c\/strong\u003e 2-3\/16 inches x 1-3\/4 inches x 1-9\/16 inches x 11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #6 FH (flat head), not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.055 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514403467\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e 726983\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal surface-mount fixture; it is not restricted to a specific boat make, model, or engine.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e726983\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color light does the Sea-Dog 401320-1 produce?\u003c\/strong\u003e The Sea-Dog 401320-1 produces a white LED light with a black finish faceplate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this light AC or DC powered?\u003c\/strong\u003e It runs on a 12 volt DC marine electrical system, the standard voltage used on most boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 401320-1 light made of?\u003c\/strong\u003e The housing is injection molded Delrin, selected for strength, heat resistance, and dimensional stability in marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 401320-1 come with mounting screws?\u003c\/strong\u003e No, mounting fasteners are not included. The fixture surface mounts with four #6 flat head (FH) screws that need to be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 401320-1 light installed?\u003c\/strong\u003e The Sea-Dog 401320-1 is a surface-mount fixture, attached with four #6 FH fasteners rather than requiring a cutout or snap-in hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this light?\u003c\/strong\u003e The 401320-1 measures 2-3\/16 inches by 1-3\/4 inches by 1-9\/16 inches, with an 11\/16 inch mounting depth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 401320-1 weigh?\u003c\/strong\u003e It weighs 0.055 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM part number that matches this light?\u003c\/strong\u003e Yes, the Sea-Dog 401320-1 has an OEM equivalent part number of 726983.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this light typically used for?\u003c\/strong\u003e It is used as a compact utility light for boat interiors, storage areas, and other low-draw task lighting applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this light fit a specific boat make or model?\u003c\/strong\u003e No, the 401320-1 is a universal surface-mount fixture and is not limited to a particular boat make, model, or engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 401320-1?\u003c\/strong\u003e The UPC for the Sea-Dog 401320-1 white LED utility light is 035514403467.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988769485019,"sku":"S-D-401320-1","price":10.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7245.jpg?v=1784439617"},{"product_id":"sea-dog-401321-1-led-utility-light-white-led-w-white-faceplate-surface-mount-12vdc-delrin","title":"Sea-Dog LED Utility Light 401321-1, White Delrin Housing with White Lens, 12V Surface Mount","description":"\u003cp\u003eThe Sea-Dog LED Utility Light 401321-1 is a compact surface-mount light built for interior and utility lighting aboard a boat. It is constructed of injection molded Delrin, a material chosen for its strength, heat resistance, and dimensional stability, making it well suited to the vibration and temperature swings found in marine electrical and cabin spaces. This version features a white housing with a white lens, giving it a clean, low-profile appearance that blends into white gelcoat, panels, and trim.\u003c\/p\u003e\u003cp\u003eInside, the 401321-1 uses a low amp draw LED bulb running on a 12 VDC system, so it draws minimal current from the house battery while still providing usable light output. It mounts to a flat surface using four #6 flat head fasteners (fasteners are not included, so have a set of #6 FH screws on hand before installation). The mounting hole pattern is a 4-hole, 1-9\/16 inch square spacing layout, and the overall footprint is a 2-3\/16 inch square with a 1-3\/4 inch lens diameter and an 11\/16 inch overall height, so it fits into typical small utility light cutouts already common on many boats.\u003c\/p\u003e\u003cp\u003eThis light is sold as an individual unit and is a straightforward drop-in for anyone replacing an existing white-on-white Sea-Dog utility light or adding new interior lighting to a helm, cabin, storage locker, or engine compartment area where a compact 12V fixture is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 401321-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e LED Utility Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Delrin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens\/Finish Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Width:\u003c\/strong\u003e 2-3\/16 inches square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Diameter:\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Pattern:\u003c\/strong\u003e 4-hole, 1-9\/16 inches square spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #6 flat head (FH), not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.055 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514403474\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e 726984\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e726984\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 401321-1?\u003c\/strong\u003e The Sea-Dog 401321-1 is a compact LED utility light with a white Delrin housing and a white lens, designed for surface mounting in boat interiors and utility areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this light?\u003c\/strong\u003e The 401321-1 has a total width of 2-3\/16 inches square, a lens diameter of 1-3\/4 inches, an overall height of 11\/16 inches, and a 4-hole mounting pattern spaced 1-9\/16 inches square.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 401321-1 made of?\u003c\/strong\u003e It is constructed of injection molded Delrin, chosen for strength, heat resistance, and dimensional stability in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting screws included with this light?\u003c\/strong\u003e No, the Sea-Dog 401321-1 mounts with four #6 flat head (FH) fasteners that are not included, so these need to be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this light run on?\u003c\/strong\u003e The 401321-1 operates on a 12 VDC marine electrical system and uses a low amp draw LED bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 401321-1 weigh?\u003c\/strong\u003e This Sea-Dog LED utility light weighs 0.055 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM cross-reference number for this part?\u003c\/strong\u003e Yes, the Sea-Dog 401321-1 has an OEM equivalent part number of 726984.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 401321-1 come in other colors?\u003c\/strong\u003e The 401321-1 specifically has a white housing with a white lens; Sea-Dog also offers this same style light with different housing and lens color combinations under other part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat light source does this fixture use?\u003c\/strong\u003e The 401321-1 uses an LED light source rather than an incandescent or halogen bulb, keeping power draw low.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this light fit a standard utility light cutout on my boat?\u003c\/strong\u003e The 401321-1 uses a 2-3\/16 inch square footprint with a 1-9\/16 inch square, 4-hole mounting pattern, which matches common small utility light cutouts, so measure your existing opening or fixture before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 401321-1 a genuine Sea-Dog part?\u003c\/strong\u003e Yes, the 401321-1 is a genuine Sea-Dog LED utility light, not a generic aftermarket copy.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988769681627,"sku":"S-D-401321-1","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7245_75e993d2-436d-4744-9db7-f6384fc79f4c.jpg?v=1784439619"},{"product_id":"sea-dog-401676-1-low-profile-led-task-light-3-3-8-white-304-stainless-steel-100-200-lumens-ip65-marine-courtesy-light","title":"Sea-Dog LED Low Profile Task Light 401676-1, 3-3\/8 Inch, White LED, Polished 304 Stainless Steel","description":"\u003cp\u003eThe Sea-Dog 401676-1 is a low-profile LED task light built for boat interiors and other spaces where a compact, flush-mounted courtesy light is needed. The bezel is machined from polished 304 stainless steel, giving it a bright finish that resists corrosion in a marine environment. Inside, the light offers a choice of 6 LEDs drawing 0.2A for 100 lumens of output, or 12 LEDs drawing 0.4A for 200 lumens, so it can be specified for either accent lighting or a brighter reading\/task light depending on how it is wired. The white LEDs turn on and off with an integral switch that is activated simply by pressing the center of the lens, so there is no separate rocker or toggle to mount. The fixture measures 3-3\/8 inches across the outer ring, with a 2-5\/8 inch lens diameter, and sits just 9\/32 inch proud of the mounting surface once installed, making it suitable for cabinets, companionways, steps, and other low-clearance locations. It installs with two #6 flat head fasteners (not included), and carries an IP65 rating for protection against dust and water spray. At 0.12 pounds, it is light enough for overhead or vertical mounting without added support.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 401676-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRing Diameter:\u003c\/strong\u003e 3-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Diameter:\u003c\/strong\u003e 2-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 9\/32 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12-28VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Output:\u003c\/strong\u003e 6 LEDs (0.2A, 100 lumens) or 12 LEDs (0.4A, 200 lumens)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Rating:\u003c\/strong\u003e IP65\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e Two #6 flat head screws (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.12 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514403511\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 401676-1 task light?\u003c\/strong\u003e The 401676-1 has a 3-3\/8 inch outer ring diameter, a 2-5\/8 inch lens diameter, and stands only 9\/32 inch tall once mounted, which is what makes it a low-profile fixture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 401676-1 turned on and off?\u003c\/strong\u003e It uses an integral switch built into the lens itself; pressing the center of the lens activates or deactivates the light, so no separate switch needs to be mounted nearby.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this light run on?\u003c\/strong\u003e The 401676-1 operates on 12-28VDC, which covers standard 12 volt and 24 volt marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow bright is the Sea-Dog 401676-1?\u003c\/strong\u003e Depending on how it is wired, this task light produces either 100 lumens from 6 LEDs drawing 0.2A, or 200 lumens from 12 LEDs drawing 0.4A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the LED on the 401676-1?\u003c\/strong\u003e The 401676-1 is fitted with white LEDs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 401676-1 waterproof?\u003c\/strong\u003e Yes, it carries an IP65 rating, protecting the internal electronics against dust ingress and water spray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the light housing made from?\u003c\/strong\u003e The bezel of the 401676-1 is polished 304 stainless steel, chosen for its corrosion resistance in marine settings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is needed to install the 401676-1?\u003c\/strong\u003e Installation requires two #6 flat head fasteners, which are not included with the light and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 401676-1 weigh?\u003c\/strong\u003e The Sea-Dog 401676-1 weighs 0.12 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 401676-1 and the smaller 401666-1 light?\u003c\/strong\u003e Both are Sea-Dog low profile LED task lights, but the 401676-1 has a larger 3-3\/8 inch ring and 2-5\/8 inch lens, while the 401666-1 is a smaller version with a 2-9\/16 inch ring and 1-3\/8 inch lens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 401676-1 have?\u003c\/strong\u003e The 401676-1 has a polished finish on its 304 stainless steel bezel.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988770271451,"sku":"S-D-401676-1","price":66.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7606.jpg?v=1784429061"},{"product_id":"sea-dog-401324-1-led-utility-light-blue-led-black-delrin-housing-12vdc-surface-mount-marine-courtesy-light","title":"Sea-Dog LED Utility Light, Blue LED, Black Finish - Part 401324-1","description":"\u003cp\u003eThe Sea-Dog 401324-1 LED Utility Light is a compact surface-mount accent light designed for boat interiors, cabins, helm areas, and other onboard spaces where low-draw accent or utility lighting is needed. It uses a blue LED bulb paired with a black housing finish, giving it a low, subtle glow that is popular for mood lighting, indirect illumination, and marking walkways or steps without the harsh brightness of a standard white light.\u003c\/p\u003e\u003cp\u003eThe housing is injection molded from Delrin, a durable engineering plastic chosen for its strength, resistance to heat, and dimensional stability in a marine environment. The light surface mounts using four #6 flat head fasteners (fasteners are not included) and runs on a 12 volt DC system, matching standard marine electrical setups. Its low amp draw makes it well suited for lighting circuits where multiple accent lights are run off the same source without significantly taxing the battery.\u003c\/p\u003e\u003cp\u003eThis is the blue LED, black finish version of the 401324 series. Sea-Dog also offers the same light body in other LED color and finish combinations, so buyers should confirm they are ordering the specific part number that matches the color and finish they want.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 401324-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e LED Utility Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Color:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection molded Delrin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface mount, four #6 flat head fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-9\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.055 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5.81 x 3.88 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514403481\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e 726985\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e726985\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the LED in the Sea-Dog 401324-1 utility light?\u003c\/strong\u003e The Sea-Dog 401324-1 uses a blue LED bulb set in a black-finish housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this light run on?\u003c\/strong\u003e The 401324-1 LED Utility Light runs on a 12 volt DC marine electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing made of?\u003c\/strong\u003e It is constructed of injection molded Delrin, chosen for strength, heat resistance, and dimensional stability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog 401324-1 installed?\u003c\/strong\u003e It surface mounts using four #6 flat head fasteners; the fasteners are not included with the light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this light?\u003c\/strong\u003e The Sea-Dog 401324-1 measures 2-3\/16 inches by 1-3\/4 inches by 1-9\/16 inches, with an 11\/16 inch dimension D.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 401324-1 weigh?\u003c\/strong\u003e This Sea-Dog LED utility light weighs 0.055 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this light waterproof?\u003c\/strong\u003e Yes, the Sea-Dog 401324-1 blue LED utility light is rated waterproof for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sea-Dog make this light in other colors or finishes?\u003c\/strong\u003e Yes. The same light body is also offered as part number 401320-1 (white LED, black finish), 401321-1 (white LED, white finish), and 401325-1 (blue LED, white finish); the 401324-1 is specifically the blue LED, black finish version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent part number for this light?\u003c\/strong\u003e The Sea-Dog 401324-1 has a listed OEM equivalent part number of 726985.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this light?\u003c\/strong\u003e The package includes one Sea-Dog 401324-1 LED utility light; mounting fasteners are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this light be used outside of a boat?\u003c\/strong\u003e The 401324-1 is designed as a marine utility light but its 12 volt DC, surface-mount design also suits other 12 volt DC low-voltage lighting applications such as cabins, RVs, and enclosed storage areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 401324-1 and 401325-1?\u003c\/strong\u003e Both use a blue LED in the same size housing, but the 401324-1 has a black finish while the 401325-1 has a white finish.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988770369755,"sku":"S-D-401324-1","price":10.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7245_513d530c-e7c7-463d-983e-43322f465dee.jpg?v=1784439621"},{"product_id":"sea-dog-401325-1-led-utility-light-blue-led-with-white-delrin-housing-12v-surface-mount-marine-courtesy-light","title":"Sea-Dog LED Utility Light 401325-1, White Housing with Blue LED, 12VDC","description":"\u003cp\u003eThe Sea-Dog 401325-1 LED Utility Light is a compact surface-mount accent light designed for interior or exterior use aboard a boat. It features a low amp draw blue LED bulb set into a white housing, giving off a soft accent glow while drawing minimal power from the 12VDC system. The housing is constructed of injection molded Delrin, a material chosen for its strength, heat resistance, and dimensional stability in the marine environment, so the light resists cracking, warping, and degradation from sun and moisture exposure over time.\u003c\/p\u003e\u003cp\u003eInstallation is a simple surface mount: the light attaches with four #6 flat head fasteners (fasteners not included), making it a straightforward add-on for cabins, steps, courtesy areas, storage compartments, or anywhere a small, low-profile accent light is useful. The compact 2-3\/16 inch overall width and 11\/16 inch depth allow it to fit in tight spaces without protruding far from the mounting surface. Sea-Dog offers this same light body in multiple housing and LED color combinations, so the white housing with blue LED configuration of the 401325-1 is a distinct part from the black-housing or white-LED versions, letting buyers match their boat's existing lighting scheme.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 401325-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e LED Utility Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Color:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection molded Delrin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Width:\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Diameter:\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Spacing:\u003c\/strong\u003e 1-9\/16 inches square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Four #6 flat head fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.055 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514403498\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e 726986\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal-fit accessory light suitable for surface mounting in boat interiors or exteriors; it is not tied to a specific make, model, or engine.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003e726986\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 401325-1 LED utility light used for?\u003c\/strong\u003e It is a small surface-mount accent light used inside or outside a boat, commonly for cabins, steps, storage areas, or other spots where a low-profile accent light is helpful.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the LED and housing on part number 401325-1?\u003c\/strong\u003e The 401325-1 has a white housing with a blue LED bulb, giving a blue accent glow from a white base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this light run on?\u003c\/strong\u003e The Sea-Dog 401325-1 runs on 12 VDC, matching standard boat electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 401325-1 mounted?\u003c\/strong\u003e It surface mounts using four #6 flat head fasteners, which are not included with the light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the housing made from?\u003c\/strong\u003e The housing is injection molded Delrin, chosen for its strength, heat resistance, and dimensional stability in marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 401325-1 light?\u003c\/strong\u003e The light measures 2-3\/16 inches overall width, with a 1-3\/4 inch lens diameter, 1-9\/16 inch square mounting hole spacing, and 11\/16 inch height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 401325-1 weigh?\u003c\/strong\u003e This Sea-Dog LED utility light weighs 0.055 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent part number for this light?\u003c\/strong\u003e Yes, the Sea-Dog 401325-1 has an OEM equivalent part number of 726986.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this light fit a specific boat make or model?\u003c\/strong\u003e No, the 401325-1 is a universal-fit accessory light and is not restricted to a particular make, model, or engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with the 401325-1?\u003c\/strong\u003e No, the four #6 flat head fasteners needed for surface mounting are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the same part as the black housing or white LED versions?\u003c\/strong\u003e No, the white-housing, blue-LED 401325-1 is a distinct part number from the black-housing and white-LED versions in the same Sea-Dog utility light line, so buyers should confirm 401325-1 for this specific white\/blue combination.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 401325-1?\u003c\/strong\u003e The UPC for the Sea-Dog 401325-1 LED utility light is 035514403498.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988770468059,"sku":"S-D-401325-1","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7245_5032b937-1dc1-4070-b4be-b0b0f2056b28.jpg?v=1784439622"},{"product_id":"sea-dog-halogen-flood-light-55w-12v-marine-spreader-light-with-304-stainless-bracket-and-h3-halogen-bulb-405115-1","title":"Sea-Dog Halogen Flood Light 405115-1 - 12V 55W H3 Bulb, Fiberglass Housing, Stainless Bracket","description":"\u003cp\u003eThe Sea-Dog Halogen Flood Light (405115-1) is a marine grade flood light built for durable, high-output illumination on boats and other outdoor applications. It runs on a 12 volt, 55 watt H3 style halogen bulb drawing 4.58 amps, giving it strong flood coverage for docking, deck work, or spotting tasks after dark. The housing is constructed of fiberglass reinforced injection molded nylon, chosen for its strength and resistance to UV degradation from prolonged sun and saltwater exposure. A solid glass lens protects the bulb while maintaining light clarity, and the light is held in place by a corrosion resistant stamped 304 stainless steel mounting bracket that stands up to the marine environment far better than painted or plated steel hardware.\u003c\/p\u003e\u003cp\u003eThis 405115-1 model measures 5-7\/8 inches by 4-1\/16 inches by 3-3\/16 inches and weighs 1.08 pounds, making it a compact flood light suitable for boats where a smaller housing footprint is needed. A larger version of this same light, the Sea-Dog 405110-1, is available as a separate SKU for applications that call for a bigger housing and wider flood pattern. Replacement H3 style 12V 55W halogen bulbs (405111-1) are also sold separately for when the original bulb burns out, so the housing and bracket do not need to be replaced along with the bulb.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 405115-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Halogen Flood Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Type:\u003c\/strong\u003e H3 Style Halogen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 55 Watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 4.58 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Fiberglass Reinforced Injection Molded Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens:\u003c\/strong\u003e Glass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Material:\u003c\/strong\u003e Stamped 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 5-7\/8 inches x 4-1\/16 inches x 3-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514405287\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Bulb:\u003c\/strong\u003e 405111-1 (12V 55W Halogen, H3 style)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat bulb does the Sea-Dog 405115-1 flood light use?\u003c\/strong\u003e It uses a 12 volt, 55 watt H3 style halogen bulb. A matching replacement bulb, part number 405111-1, is sold separately for when the original bulb needs replacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 405115-1 flood light?\u003c\/strong\u003e The Sea-Dog 405115-1 measures 5-7\/8 inches by 4-1\/16 inches by 3-3\/16 inches and weighs 1.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this flood light waterproof or marine rated?\u003c\/strong\u003e Yes, the 405115-1 is a marine grade flood light with a fiberglass reinforced injection molded housing and a stamped 304 stainless steel mounting bracket for corrosion resistance in wet, salt-exposed environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing made of?\u003c\/strong\u003e The housing on the Sea-Dog 405115-1 is fiberglass reinforced injection molded nylon, selected for strength and UV resistance, paired with a solid glass lens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the mounting bracket?\u003c\/strong\u003e The mounting bracket included with the 405115-1 flood light is stamped 304 stainless steel, chosen for corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much power does this light draw?\u003c\/strong\u003e The Sea-Dog 405115-1 operates at 12 volts and draws 4.58 amps while producing 55 watts of halogen light output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a larger version of this flood light?\u003c\/strong\u003e Yes, Sea-Dog also offers the 405110-1, a larger flood light in the same series measuring 6-15\/16 inches by 5-5\/16 inches by 3-3\/16 inches; it is a separate part number from the 405115-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the bulb be replaced without buying a new light?\u003c\/strong\u003e Yes, the H3 style 12V 55W halogen bulb used in the 405115-1 is available separately as part number 405111-1, so only the bulb needs replacing when it burns out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of?\u003c\/strong\u003e The 405115-1 flood light uses a solid glass lens rather than plastic, which holds up better to prolonged UV and outdoor exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this light include a mounting bracket?\u003c\/strong\u003e Yes, the Sea-Dog 405115-1 includes a stamped 304 stainless steel mounting bracket for attaching the light to a boat or other surface.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988771287259,"sku":"S-D-405115-1","price":28.16,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8039.jpg?v=1784429080"},{"product_id":"attwood-11794-7-portable-5-watt-led-emergency-spotlight-with-12v-cigarette-style-adapter-plug-safety-yellow-black","title":"Attwood 11794-7 Portable 5W LED Emergency Spotlight, 12V Adapter Plug, Safety Yellow\/Black","description":"\u003cp\u003eThe Attwood 11794-7 is a compact 5-watt LED portable spotlight built for emergency use, nighttime docking, and general boat maintenance after dark. It puts out 400 lumens from a single LED light source rated for 50,000 hours of service life, giving boaters a bright, dependable beam without the bulb-replacement hassle of older halogen spotlights. The housing is constructed of durable, rust-resistant plastic in a safety yellow and black finish, so the light stays visible and easy to spot in a gear locker or emergency kit even in low light.\u003c\/p\u003e\u003cp\u003ePower flexibility is the key feature of this spotlight: it runs on batteries for fully portable, handheld use, and it also includes a 10-foot power cord terminating in a 12-volt cigarette-style adapter plug with a built-in fuse, so it can be run continuously off a boat's 12-volt accessory outlet. The 10-foot cord lets you move around the vessel while staying powered, which is useful for extended docking, troubleshooting, or emergency signaling. The unit carries a water-resistant rating suitable for marine environments and is sized for one-handed, handheld operation.\u003c\/p\u003e\u003cp\u003eThis spotlight is a universal accessory item and is not tied to a specific boat make, model, or engine, so it fits any vessel with a standard 12-volt accessory outlet. It is built by Attwood, a long-time manufacturer of marine lighting, fuel systems, water systems, seating, and other boat accessories.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11794-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Boat Spotlight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source Wattage:\u003c\/strong\u003e 5 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Output:\u003c\/strong\u003e 400 lumens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Battery powered (batteries not included), with included 12-volt adapter plug for continuous power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Cord Length:\u003c\/strong\u003e 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Rated Life:\u003c\/strong\u003e 50,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Handheld\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Safety yellow and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 6 inches long x 4.5 inches wide x 7.5 inches high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Portable LED spotlight, 12-volt cigarette-style adapter plug with fuse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697179470\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow bright is the Attwood 11794-7 spotlight?\u003c\/strong\u003e The Attwood 11794-7 puts out 400 lumens from its single 5-watt LED light source, which is bright enough for docking, emergency signaling, and nighttime boat maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 11794-7 spotlight run on batteries or plug into the boat?\u003c\/strong\u003e Both: the Attwood 11794-7 is battery powered for handheld portable use, and it also comes with a 10-foot cord and a 12-volt cigarette-style adapter plug so it can run continuously off the boat's accessory outlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre batteries included with this spotlight?\u003c\/strong\u003e No, batteries are not included with the Attwood 11794-7; the spotlight is battery powered but ships without batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the LED lifespan on the Attwood 11794-7?\u003c\/strong\u003e The LED in the Attwood 11794-7 is rated for 50,000 hours of use, so it is not designed to require bulb replacement over the life of the light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 12-volt adapter plug fused?\u003c\/strong\u003e Yes, the included 12-volt cigarette-style adapter plug on the Attwood 11794-7 has a built-in fuse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the power cord on this spotlight?\u003c\/strong\u003e The Attwood 11794-7 has a 10-foot power cord, which lets you move around the vessel while the light stays plugged into the 12-volt outlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Attwood 11794-7 spotlight?\u003c\/strong\u003e The Attwood 11794-7 measures 6 inches long by 4.5 inches wide by 7.5 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 11794-7 spotlight weigh?\u003c\/strong\u003e The Attwood 11794-7 weighs 1.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the spotlight housing made of?\u003c\/strong\u003e The Attwood 11794-7 has a durable, rust-resistant plastic housing finished in safety yellow and black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 11794-7 waterproof?\u003c\/strong\u003e The Attwood 11794-7 is water resistant, which suits it for typical marine spray and deck conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 11794-7?\u003c\/strong\u003e The Attwood 11794-7 kit includes the portable LED spotlight and a 12-volt cigarette-style adapter plug with fuse; batteries are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 11794-7 fit a specific boat make or model?\u003c\/strong\u003e The Attwood 11794-7 is a universal handheld spotlight that works with any boat's standard 12-volt accessory outlet and is not limited to a specific make or model.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989665296603,"sku":"ATT-11794-7","price":33.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Attwood_12V_Portable_Spot_Light__75844.1722491714.500.750.jpg?v=1785189135"},{"product_id":"attwood-14185xfs-7-multi-function-led-sport-light-300-lumen-flood-50-lumen-red-night-vision-uv-lure-charging-water-resistant-gray","title":"Attwood 14185XFS-7 Multi-Function LED Sport Light, 300 Lumen Flood, 50 Lumen Red Beam, UV Mode, Gray","description":"\u003cp\u003eThe Attwood 14185XFS-7 Multi-Function Sport Light is a durable, water-resistant handheld light built for anglers, boaters, hunters, and campers who need more than one type of light in the field. It switches between a bright 300 lumen flood light for general illumination and a 50 lumen red beam mode that preserves night vision, making it easy to move around the boat or campsite after dark without losing your eyes' adjustment to darkness. A dedicated UV mode is also built in, useful for charging fishing lures and fishing line so they glow for improved visibility in low light.\u003c\/p\u003e\u003cp\u003eThe light is designed to mount where you need it: it offers four mounting options along with 360 degree rotation, so the beam can be aimed exactly where required. It also includes an adapter for use with an Attwood rod holder mount, letting it double as a hands-free light on the boat. The housing has a gray finish and a water-resistant, clear lens built to hold up to marine conditions. Power comes from six AA batteries, which are not included, keeping the unit cordless and portable for use anywhere from the boat deck to the campsite.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 14185XFS-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlood Light Output:\u003c\/strong\u003e 300 lumens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Beam Output:\u003c\/strong\u003e 50 lumens (night vision mode)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional Mode:\u003c\/strong\u003e UV mode for charging fishing lures and line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Four mounting options with 360 degree rotation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Accessory:\u003c\/strong\u003e Adapter for Attwood rod holder mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Six AA batteries (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Water-resistant material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Length:\u003c\/strong\u003e 32 centimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Width:\u003c\/strong\u003e 18.8 centimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Height:\u003c\/strong\u003e 5.08 centimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.4062 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 10 year manufacturer warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e 728818\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal use for boats, fishing, hunting, and camping; not limited to a specific make or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e728818\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 14185XFS-7 light used for?\u003c\/strong\u003e The Attwood 14185XFS-7 is a multi-function sport light designed for fishing, boating, hunting, and camping, offering a bright flood light, a red night-vision beam, and a UV mode in one unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow bright is the flood light mode?\u003c\/strong\u003e The flood light mode on the 14185XFS-7 produces 300 lumens, providing strong general-purpose illumination on deck or at a campsite.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the red beam mode affect night vision?\u003c\/strong\u003e No, the red beam is designed to help preserve night vision. The 14185XFS-7 puts out 50 lumens in red beam mode, which is easier on the eyes in the dark than a white flood light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UV mode used for on this light?\u003c\/strong\u003e The UV mode on the Attwood 14185XFS-7 is used for charging fishing lures and fishing line so they glow for better visibility in low-light conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat batteries does the 14185XFS-7 require?\u003c\/strong\u003e This light requires six AA batteries to operate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre batteries included with the light?\u003c\/strong\u003e No, the six AA batteries required to power the Attwood 14185XFS-7 are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can the light be mounted?\u003c\/strong\u003e The 14185XFS-7 features four mounting options along with 360 degree rotation, allowing the beam to be aimed as needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 14185XFS-7 work with a rod holder?\u003c\/strong\u003e Yes, it includes an adapter for use with an Attwood rod holder mount, letting the light attach directly to a rod holder on the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent part number for the 14185XFS-7?\u003c\/strong\u003e Yes, the Attwood 14185XFS-7 has an OEM equivalent part number of 728818.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 14185XFS-7 water-resistant?\u003c\/strong\u003e Yes, the 14185XFS-7 is built with a durable, water-resistant housing and lens suited to marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Attwood 14185XFS-7 light?\u003c\/strong\u003e The 14185XFS-7 has a gray finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 14185XFS-7 weigh?\u003c\/strong\u003e The Attwood 14185XFS-7 Multi-Function Sport Light weighs 1.4062 pounds.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989666214107,"sku":"ATT-14185XFS-7","price":56.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-14185xfs-7_lg__79597.1558181002.500.750.jpg?v=1785188291"},{"product_id":"attwood-14187xfs-7-xfs-multi-function-led-sport-light-300-lumen-flood-red-beam-uv-mode-realtree-max-4-camo","title":"Attwood 14187XFS-7 Multi-Function LED Sport Light, Realtree Max-4 Camouflage, 300 Lumen","description":"\u003cp\u003eThe Attwood 14187XFS-7 is a water-resistant, multi-function LED sport light built for boaters, anglers, and outdoor use where a single portable light needs to do several jobs. It runs on 5 watts at 12-volt DC and switches between a 300 lumen white flood light for general illumination and a 50 lumen red beam light for low-glare, night-vision-friendly use. A dedicated UV (ultra-violet) mode is included for charging UV paint coated lures and line, making it a practical tool for night fishing as well as general lighting around the boat or campsite.\u003c\/p\u003e\u003cp\u003eThe light head rotates a full 360 degrees for aiming, and the lens is a clear polycarbonate lens for impact resistance and light clarity. It ships with four mounting options, including a rod holder mount adapter and a mounting clamp, so it can be set up on a boat gunwale, a rod holder, or another compatible surface without additional hardware. The housing is finished in Realtree Max-4 camouflage, and the light measures 12 x 8 x 3 inches as packaged.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 14187XFS-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Realtree Max-4 Camouflage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 5 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Flood Light Output:\u003c\/strong\u003e 300 lumens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Beam Light Output:\u003c\/strong\u003e 50 lumens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Features:\u003c\/strong\u003e Water-resistant, multi-function, 360 degree rotation, UV mode, four mounting options\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 12 x 8 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.55 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e XFS Multi-Function Sport Light, rod holder mount adapter, and mounting clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697418708\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e 728819\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for boats and other applications using the included rod holder mount adapter and mounting clamp; not specific to a single make or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003e728819\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 14187XFS-7 used for?\u003c\/strong\u003e The Attwood 14187XFS-7 is a portable multi-function LED sport light designed for boating, fishing, hunting, and camping, switching between a 300 lumen white flood light and a 50 lumen red beam light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 14187XFS-7 have a UV light mode?\u003c\/strong\u003e Yes, the Attwood 14187XFS-7 includes a dedicated UV (ultra-violet) mode for charging UV paint coated lures and fishing line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does this light come in?\u003c\/strong\u003e It is finished in Realtree Max-4 camouflage, giving the Attwood 14187XFS-7 a low-visibility outdoor appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Attwood 14187XFS-7 mounted?\u003c\/strong\u003e It comes with four mounting options, including a rod holder mount adapter and a mounting clamp, allowing it to be attached to a boat, rod holder, or other compatible surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of this light?\u003c\/strong\u003e The Attwood 14187XFS-7 measures 12 x 8 x 3 inches as packaged and weighs 1.55 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent part number for the 14187XFS-7?\u003c\/strong\u003e Yes, the Attwood 14187XFS-7 cross-references to OEM equivalent part number 728819.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this light?\u003c\/strong\u003e The package includes the XFS Multi-Function Sport Light itself, a rod holder mount adapter, and a mounting clamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 14187XFS-7 water-resistant?\u003c\/strong\u003e Yes, this light is water-resistant, making it suitable for use on a boat or in wet outdoor conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the light head be rotated after mounting?\u003c\/strong\u003e Yes, the Attwood 14187XFS-7 head rotates a full 360 degrees so it can be aimed in any direction once mounted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of on this light?\u003c\/strong\u003e The Attwood 14187XFS-7 uses a clear polycarbonate lens for durability and light output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much power does this light draw?\u003c\/strong\u003e The Attwood 14187XFS-7 draws 5 watts at 12-volt DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Attwood product?\u003c\/strong\u003e Yes, the 14187XFS-7 is a genuine Attwood part, sold under Attwood's own manufacturer part number and UPC 022697418708.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989666312411,"sku":"ATT-14187XFS-7","price":81.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-14187xfs-7_lg__75842.1558181049.500.750.jpg?v=1785189084"},{"product_id":"attwood-6355w7-4-inch-led-utility-light-6-white-leds-12v-marine-interior-exterior-courtesy-light","title":"Attwood 4 Inch LED Utility Light 6355W7, 6 White LEDs, 12 Volt Waterproof Boat Interior Light","description":"\u003cp\u003eThe Attwood 6355W7 is a 4-inch LED utility light built for interior and exterior lighting on boats. It uses 6 bright white LEDs on a 12-volt DC system, drawing less than 1 amp so it can run for extended periods without straining a boat's electrical system. The compact, low-profile surface-mount design lets it install flush on flat surfaces, making it a practical fit for boat cabins, cockpits, storage lockers, steps, walkways, and companionways where focused, energy-efficient light is needed.\u003c\/p\u003e\u003cp\u003eBuilt with a water-resistant housing to hold up to marine moisture and spray, the 6355W7 uses a plastic or polycarbonate lens for durability against everyday wear. It is part of Attwood's utility lighting lineup, which also includes larger 6-inch and 8-inch versions for spaces that need broader coverage. As a surface-mount accent and task light, it is a low-maintenance option for boat owners looking to upgrade dim or failing interior lighting with a longer-lasting LED source.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6355W7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 4 Inch Utility Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Count:\u003c\/strong\u003e 6 white LEDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Plastic or Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 12 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e Less than 1 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Use:\u003c\/strong\u003e Interior lighting for boat cabins, cockpits, storage lockers, steps, walkways, and companionways\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697635570\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2624 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many LEDs does the Attwood 6355W7 utility light have?\u003c\/strong\u003e The Attwood 6355W7 has 6 white LEDs, providing bright illumination while drawing less than 1 amp on a standard 12-volt DC boat electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 6355W7 waterproof?\u003c\/strong\u003e Yes, the Attwood 6355W7 has a water-resistant, marine-grade housing designed to withstand spray and moisture in onboard environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Attwood 6355W7 utility light?\u003c\/strong\u003e It is a 4-inch utility light, the smallest in Attwood's utility lighting lineup, which also includes 6-inch (12 LED) and 8-inch (18 LED) versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can the 6355W7 be installed on a boat?\u003c\/strong\u003e This light is suited for boat cabins, cockpits, storage lockers, steps, walkways, and companionways thanks to its compact, low-profile surface-mount design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 6355W7 run on?\u003c\/strong\u003e The Attwood 6355W7 operates on a 12-volt DC power supply, standard for most boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Attwood 6355W7 mounted?\u003c\/strong\u003e The 6355W7 uses a compact surface-mount design that installs easily onto flat surfaces without a recessed cutout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of on the 6355W7?\u003c\/strong\u003e The lens on the Attwood 6355W7 is made of plastic or polycarbonate, chosen for durability in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 6355W7 weigh?\u003c\/strong\u003e The Attwood 6355W7 weighs 0.2624 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color light does the 6355W7 produce?\u003c\/strong\u003e The 6355W7 produces white light from its 6 LEDs, suited to general interior task and accent lighting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 6355W7 differ from the Attwood 6354W7 or 6353W7?\u003c\/strong\u003e The 6355W7 is the 4-inch, 6-LED version, while the 6354W7 is a 6-inch light with 12 white LEDs and the 6353W7 is an 8-inch light with 18 white LEDs, giving buyers a size and brightness option to match the space being lit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much power does the 6355W7 draw?\u003c\/strong\u003e The Attwood 6355W7 draws less than 1 amp on a 12-volt DC circuit, making it energy efficient for continuous use.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989672243419,"sku":"ATT-6355W7","price":13.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Attwood_4inch_Utility_Light__88881.1722353135.500.750.jpg?v=1785188186"},{"product_id":"attwood-7100a7-telescoping-pole-light-24-in-zamak-base-2-mile-360-degree-stern-navigation-light-for-boats-to-65-6-ft","title":"Attwood Telescoping Pole Light with ZAMAK Base, 24 Inch, 9-Watt, Fits 911339 Base","description":"\u003cp\u003eThe Attwood 7100A7 is a 24 inch telescoping stern pole light built for older-style boats that use a plug-in style base. The pole seats into an Attwood 911339 base, which features a die-cast ZAMAK construction and a locking knob that lets the pole be lowered flush toward the gunwale when not in use, keeping the deck clear while underway or at the dock. Once raised and locked, the light delivers 360 degree, 2 nautical mile visible illumination, meeting the needs of boats up to 65.6 feet (20 meters) in length. The lamp is a 9-watt wedge-base bulb running on a 12-volt system, housed behind a clear polycarbonate lens that resists yellowing and impact better than glass. The base mounts with three countersunk holes sized for number 10 fasteners and extends 3 inches below the deck when installed, so adequate clearance underneath is required for the pole to lower properly. This 24 inch pole (7100A7) is one of three lengths built on the same base and mounting pattern; if a taller pole is needed, the 30 inch version is sold as 7100B7 and the 36 inch version as 7100C7, each a separate part number. The light and its ZAMAK base combine straightforward, no-tool stowing with a durable, corrosion-resistant build suited to regular marine exposure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7100A7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Telescoping Pole Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Length:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Type:\u003c\/strong\u003e Die-cast ZAMAK with locking knob\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Part Number:\u003c\/strong\u003e 911339\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIllumination Range:\u003c\/strong\u003e 2 nautical miles, 360 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Vessel Length:\u003c\/strong\u003e 65.6 feet (20 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb:\u003c\/strong\u003e 9-watt wedge-base lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Three countersunk holes for number 10 fasteners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Clearance Below Deck:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimensions:\u003c\/strong\u003e 4 inches L x 1 5\/8 inches W x 1 3\/8 inches diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697710031\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRated for boats up to 65.6 feet (20 meters) and designed to pair with the Attwood 911339 base. This 24 inch pole (7100A7) mounts using the same base and three-hole, number 10 fastener pattern as the 30 inch (7100B7) and 36 inch (7100C7) versions, so pole length can be matched to the boat without changing the base.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pole length of the Attwood 7100A7?\u003c\/strong\u003e The Attwood 7100A7 has a 24 inch pole. The same series is also available in 30 inches (7100B7) and 36 inches (7100C7) if a different height is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat base does the 7100A7 use?\u003c\/strong\u003e It pairs with the Attwood 911339 base, a die-cast ZAMAK base with a locking knob that lets the pole be lowered toward the gunwale when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much visibility does this pole light provide?\u003c\/strong\u003e It provides 2 nautical mile, 360 degree illumination, suitable for boats up to 65.6 feet (20 meters) in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bulb does the 7100A7 use?\u003c\/strong\u003e It uses a 9-watt wedge-base lamp running on a 12-volt system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of?\u003c\/strong\u003e The lens is clear polycarbonate, which resists impact and yellowing better than glass over time in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the base mounted to the deck?\u003c\/strong\u003e The base has three countersunk holes sized for number 10 fasteners for a flush-mount installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this light need clearance below deck?\u003c\/strong\u003e Yes. The 911339 base extends 3 inches below the deck, so adequate clearance underneath is required for the pole to lower into the stowed position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the base?\u003c\/strong\u003e The base used with the 7100A7 measures 4 inches long, 1 5\/8 inches wide, and 1 3\/8 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 7100A7 weigh?\u003c\/strong\u003e The 7100A7 weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the pole be removed or lowered when not in use?\u003c\/strong\u003e Yes, the ZAMAK base has a locking knob that allows the pole to be lowered toward the gunwale for stowage, and the pole can be removed from the base entirely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 7100A7, 7100B7, and 7100C7?\u003c\/strong\u003e All three use the same ZAMAK base and mounting pattern; the difference is pole length, with the 7100A7 at 24 inches, 7100B7 at 30 inches, and 7100C7 at 36 inches.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989673750747,"sku":"ATT-7100A7","price":48.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41CsiNZVAAL.jpg?v=1784487051"},{"product_id":"attwood-7100c7-telescoping-pole-stern-light-36-in-pole-with-zamak-base-2-mile-360-degree-all-round-white-navigation-light-for-boats-up-to-65-6-ft","title":"Attwood 7100C7 Telescoping Pole Light with ZAMAK Base, 36-Inch Pole, 2-Mile 360-Degree Illumination for Boats up to 65.6 Feet","description":"\u003cp\u003eThe Attwood 7100C7 is a telescoping pole light built for older-style boats that need a traditional, deck-mounted navigation light. It uses a die-cast ZAMAK base with a locking knob that lets the pole be lowered to the gunwale when the light is not in use, keeping the pole out of the way during storage or low-clearance situations. Once raised, the light delivers 2-mile, 360-degree illumination and is rated for boats up to 65.6 feet (20 m), making it suitable for a wide range of recreational and small commercial vessels.\u003c\/p\u003e\u003cp\u003eThe fixture includes a 9-watt wedge-base lamp, so there is no separate bulb to source before installation. The base mounts through three countersunk holes sized for number 10 fasteners, giving a low-profile, flush installation on the deck. Because the pole telescopes and locks down to the gunwale rather than mounting permanently upright, boat owners should confirm there is adequate clearance below deck for the pole when it is lowered before finalizing the mounting location. The clear polycarbonate lens is built to withstand marine exposure, and the fixture is finished in silver to blend with common deck hardware. This is a direct fit-and-forget navigation light for boats that already use a wedge-base pole light system, sold under the Attwood 7100C7 part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 7100C7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole Length:\u003c\/strong\u003e 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Material:\u003c\/strong\u003e Die-cast ZAMAK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIllumination Range:\u003c\/strong\u003e 2 nautical miles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIllumination Pattern:\u003c\/strong\u003e 360 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Boat Length:\u003c\/strong\u003e 65.6 feet (20 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb:\u003c\/strong\u003e 9-watt wedge-base lamp, included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Three countersunk holes for number 10 fasteners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimensions:\u003c\/strong\u003e 4 inches long x 1 5\/8 inches wide x 1 3\/8 inches diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7.37 x 55 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.1333 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 9 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697710062\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe Attwood 7100C7 is rated for boats up to 65.6 feet (20 m) and is not limited to a specific make, model, or engine; it fits any deck that can accommodate the base's three countersunk mounting holes for number 10 fasteners, provided there is clearance below deck for the pole when lowered.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference or replacement part numbers are listed for the Attwood 7100C7; it is sold and ordered under its own part number.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boat sizes is the Attwood 7100C7 rated for?\u003c\/strong\u003e The Attwood 7100C7 telescoping pole light is rated to provide 2-mile, 360-degree illumination on boats up to 65.6 feet (20 m), covering the vast majority of recreational and small commercial vessels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 7100C7 come with a bulb?\u003c\/strong\u003e Yes, the Attwood 7100C7 includes a 9-watt wedge-base lamp, so it is ready to install without needing to source a bulb separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the pole on the 7100C7?\u003c\/strong\u003e The pole on the Attwood 7100C7 is 36 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The base of the Attwood 7100C7 is die-cast ZAMAK, a zinc alloy chosen for durability in a fixed deck-mounted light base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the pole be lowered when the light isn't in use?\u003c\/strong\u003e Yes, the ZAMAK base on the 7100C7 has a locking knob that allows the pole to be lowered down to the gunwale when the light is not needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before installing this light?\u003c\/strong\u003e Before mounting the Attwood 7100C7, confirm there is adequate clearance below deck for the pole to sit when it is lowered, since the base allows the pole to fold down to gunwale level.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 7100C7 mounted to the deck?\u003c\/strong\u003e The 7100C7 base mounts through three countersunk holes sized for number 10 fasteners, giving a flush, low-profile installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the base?\u003c\/strong\u003e The base of the Attwood 7100C7 measures 4 inches long by 1 5\/8 inches wide by 1 3\/8 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 7100C7 weigh?\u003c\/strong\u003e The Attwood 7100C7 weighs 1.1333 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and lens material does this light have?\u003c\/strong\u003e The Attwood 7100C7 has a silver-finished base with a clear polycarbonate lens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there OEM cross-reference numbers for this light?\u003c\/strong\u003e No OEM equivalent or replacement part numbers are listed for the Attwood 7100C7; it is ordered under its own 7100C7 part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this light designed for older or newer boats?\u003c\/strong\u003e The Attwood 7100C7 is designed for older-style boats that use a fixed, lowering-style pole light base rather than a modern removable pole system.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989674275035,"sku":"ATT-7100C7","price":56.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41BRkdwQFeL.jpg?v=1784487070"},{"product_id":"perko-0071dp0clr-12v-10w-festoon-bulb-pair-for-1123-1124-1125-navigation-pole-lights","title":"Perko 0071DP0CLR 12V 10 Watt Festoon Bulb for 1123, 1124, 1125 Navigation Light Fixtures","description":"\u003cp\u003eThe Perko 0071DP0CLR is a 12-volt, 10-watt double-ended festoon bulb designed as the replacement bulb for Perko's 1123, 1124, and 1125 series navigation light fixtures. Rated at 12 volts and 0.80 amps, this festoon-style bulb has a compact 3\/8 inch diameter and measures 1-1\/8 inches in length, allowing it to seat directly into the festoon-style sockets used in these fixture bases. It is intended for damp-location use, matching the wet, salt-air environment typical of boat deck and bow-mounted navigation lights.\u003c\/p\u003e\u003cp\u003eThis bulb is sold as a pack of 2, giving boat owners a spare on hand for the next time a navigation light dims or burns out. Because navigation lights are a safety-critical system, keeping a matching replacement bulb aboard helps ensure lights stay in proper working order for night operation. The double-ended festoon design means the bulb has no threaded base -- it simply drops into place between the two spring contacts of the socket, making it a quick swap without tools.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0071DP0CLR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 10 Watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 0.80 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Type:\u003c\/strong\u003e Double-Ended Festoon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Diameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Length:\u003c\/strong\u003e 1-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Pack of 2 bulbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Use:\u003c\/strong\u003e Damp locations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePerko Fig. 1123 navigation light fixtures (12V bulb)\u003c\/li\u003e\n\u003cli\u003ePerko Fig. 1124 navigation light fixtures (12V bulb)\u003c\/li\u003e\n\u003cli\u003ePerko Fig. 1125 navigation light fixtures (12V bulb)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat fixtures does the Perko 0071DP0CLR bulb fit?\u003c\/strong\u003e The 0071DP0CLR is the 12V replacement bulb for Perko's Fig. 1123, Fig. 1124, and Fig. 1125 navigation light fixtures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and wattage is this bulb?\u003c\/strong\u003e It is a 12 volt, 10 watt bulb drawing 0.80 amps, sized for Perko navigation light sockets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 0071DP0CLR a double-ended or single-ended bulb?\u003c\/strong\u003e It is a double-ended festoon bulb, meaning it has no threaded base and seats directly between the spring contacts of the fixture socket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bulbs come in a pack?\u003c\/strong\u003e The Perko 0071DP0CLR is sold as a pack of 2 bulbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the bulb itself?\u003c\/strong\u003e The 0071DP0CLR measures 1-1\/8 inches in length with a 3\/8 inch bulb diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bulb rated for outdoor or wet marine use?\u003c\/strong\u003e Yes, the 0071DP0CLR is rated for damp locations, suiting the deck and bow environments where Perko navigation lights are mounted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need tools to replace this bulb?\u003c\/strong\u003e No. As a double-ended festoon bulb, the 0071DP0CLR simply drops into the socket contacts without a threaded base, so it can be swapped by hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bulb work with the Perko Fig. 1625 fixture?\u003c\/strong\u003e The 0071DP0CLR is listed as the bulb for Perko Fig. 1123, 1124, and 1125 fixtures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for this Perko bulb?\u003c\/strong\u003e The part number is 0071DP0CLR, a 12V 10 watt festoon bulb from Perko.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the bulb weigh?\u003c\/strong\u003e Each Perko 0071DP0CLR bulb weighs 0.02 pounds.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991097454811,"sku":"PKO-71DP0CLR","price":14.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-71DPCLR_lg__62352.1558118173.500.750.jpg?v=1785188361"},{"product_id":"perko-0338dp1clr-12v-wedge-base-bulb-5-watt-clear-pack-of-2","title":"Perko 0338DP1CLR 12V Wedge Base Bulb, 5 Watt, Clear, Pack of 2","description":"\u003cp\u003eThe Perko 0338DP1CLR is a 12 volt wedge base replacement bulb sold as a package of 2, built to fit Perko's wedge-base navigation light fixtures. It draws 5 watts at 0.35 amps and has a bulb diameter of 13\/32 inch with a bulb length of 1-1\/16 inch, sizing it for compact wedge-base sockets used in small marine light housings such as side markers and similar fixtures. The bulb is certified for use on power driven vessels under 20 meters in length, making it suitable for keeping navigation lighting compliant on boats up to that size. It is constructed with quality materials for long lasting durability under marine conditions, where vibration and moisture put extra stress on lighting components. Because it uses a simple push-in wedge base rather than a bayonet or screw base, installation is a quick swap once the old bulb is removed from the fixture. Ordering the correct wedge base bulb matters for maintaining proper navigation light output and legal compliance, and having 2 bulbs on hand means a spare is ready when the first one burns out. This is a genuine Perko part, identified by the manufacturer part number 0338DP1CLR.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0338DP1CLR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2 bulbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Voltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 5 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 0.35 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Base Type:\u003c\/strong\u003e Wedge base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Diameter:\u003c\/strong\u003e 13\/32 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Length:\u003c\/strong\u003e 1-1\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e Certified for use on power driven vessels under 20 meters in length\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many bulbs come in a package of the Perko 0338DP1CLR?\u003c\/strong\u003e The Perko 0338DP1CLR is sold as a package of 2 bulbs, so you get a spare on hand when the first one burns out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and wattage is the 0338DP1CLR bulb?\u003c\/strong\u003e It is a 12 volt, 5 watt bulb drawing 0.35 amps, sized for wedge-base marine light fixtures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of base does this bulb use?\u003c\/strong\u003e The Perko 0338DP1CLR uses a wedge base, a push-in style socket rather than a bayonet or screw base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the physical dimensions of the bulb?\u003c\/strong\u003e The bulb has a diameter of 13\/32 inch and a length of 1-1\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the bulb?\u003c\/strong\u003e The 0338DP1CLR is a clear bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko 0338DP1CLR bulb certified for navigation lighting use?\u003c\/strong\u003e Yes, it is certified for use on power driven vessels under 20 meters in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Perko 0338DP1CLR bulb weigh?\u003c\/strong\u003e Each package weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Perko part?\u003c\/strong\u003e Yes, the 0338DP1CLR is a genuine Perko wedge base bulb identified by that manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install the 0338DP1CLR bulb?\u003c\/strong\u003e Since it uses a wedge base, installation is a simple push-in swap after removing the old bulb from the fixture socket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this bulb typically used for?\u003c\/strong\u003e The Perko 0338DP1CLR wedge base bulb is used in marine light fixtures with wedge-base sockets, such as navigation and side marker lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 0338DP1CLR come with a base or fixture included?\u003c\/strong\u003e No, this listing is for the replacement bulb only; the base and light fixture are sold separately.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991102632155,"sku":"PKO-0338DP1CLR","price":10.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51HKcyA0OEL.jpg?v=1784491541"},{"product_id":"perko-0338dp2clr-wedge-base-bulb-12v-9w-clear-2-pack-fits-perko-1440-1445-1460-1634-1637-1650-1655","title":"Perko Wedge Style 12 Volt 9 Watt Replacement Light Bulb, Clear, 2-Pack - 0338DP2CLR","description":"\u003cp\u003eThe Perko 0338DP2CLR is a 12 volt, 9 watt wedge-base replacement bulb sold as a set of 2, made for use in Perko wedge-socket boat lights. It draws 0.69 amps and has a clear, 5\/8 inch diameter glass envelope, giving off a white light output when lit. The wedge base allows the bulb to push-fit directly into the socket without a twist-lock or screw connection, making bulb changes fast when a light burns out or needs routine replacement.\u003c\/p\u003e\u003cp\u003eThis bulb is built to fit Perko wedge-socket fixtures, including Perko Light models 1460, 1440, 1445, 1634, 1637, 1650, and 1655. Always check your specific Perko fixture's socket type against the wedge base of this bulb before ordering to confirm proper fit. The plastic wedge base and clear glass construction are sized for direct drop-in replacement in these compatible Perko lights, and the 2-pack means a spare is on hand for the next bulb change.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0338DP2CLR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Style:\u003c\/strong\u003e Wedge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 9 Watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 0.69 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Diameter:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Shape:\u003c\/strong\u003e B9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass Color:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Fixtures:\u003c\/strong\u003e Perko Light 1460, 1440, 1445, 1634, 1637, 1650, 1655\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2 bulbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226047145\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePerko Light 1460\u003c\/li\u003e\n\u003cli\u003ePerko Light 1440\u003c\/li\u003e\n\u003cli\u003ePerko Light 1445\u003c\/li\u003e\n\u003cli\u003ePerko Light 1634\u003c\/li\u003e\n\u003cli\u003ePerko Light 1637\u003c\/li\u003e\n\u003cli\u003ePerko Light 1650\u003c\/li\u003e\n\u003cli\u003ePerko Light 1655\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat lights does the Perko 0338DP2CLR bulb fit?\u003c\/strong\u003e The Perko 0338DP2CLR wedge bulb is made to fit Perko Light models 1460, 1440, 1445, 1634, 1637, 1650, and 1655. Confirm your fixture uses a wedge-base socket before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bulbs come in a pack?\u003c\/strong\u003e The 0338DP2CLR ships as a 2-pack, so a spare bulb is included for the next replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and wattage is this bulb rated for?\u003c\/strong\u003e This Perko bulb is rated 12 volts and 9 watts, drawing 0.69 amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 0338DP2CLR bulb clear or colored?\u003c\/strong\u003e The glass on the 0338DP2CLR is clear, and it produces a white light when lit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of base does this bulb use?\u003c\/strong\u003e It uses a wedge base, which pushes directly into a wedge socket without twisting or screwing in, common in Perko boat light fixtures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bulb diameter of the 0338DP2CLR?\u003c\/strong\u003e The glass envelope on this Perko wedge bulb measures 5\/8 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Perko 0338DP2CLR weigh?\u003c\/strong\u003e The 2-pack of Perko 0338DP2CLR bulbs weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bulb made by Perko or an aftermarket brand?\u003c\/strong\u003e The 0338DP2CLR is a genuine Perko part, manufactured by Perko for use in its wedge-socket light fixtures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bulb shape and size code?\u003c\/strong\u003e The 0338DP2CLR is a B9 shape bulb with a wedge base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this bulb outside of Perko fixtures?\u003c\/strong\u003e The 0338DP2CLR is designed and sold for Perko wedge-socket lights; verify a non-Perko fixture uses the same wedge base and 12 volt, 9 watt rating before substituting it.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991102795995,"sku":"PKO-338DP2CLR","price":10.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-338DP2CLR_lg__90136.1558117364.500.750.jpg?v=1785188567"},{"product_id":"t-h-marine-lane-blaster-led-trolling-motor-headlight-1000-lumen-ip68-waterproof-spot-beam-for-trolling-motors","title":"T-H Marine Lane Blaster LED Trolling Motor Headlight, 1000 Lumen Spot Beam, IP68 Waterproof","description":"\u003cp\u003eThe T-H Marine Lane Blaster LED Trolling Motor Headlight (LED-TMHL) is a super bright spot beam headlight built to mount directly to a trolling motor mount, giving anglers a focused, high-output light source for running and working the water after dark. The single LED puts out 1000 lumens from a 10 watt, 10 volt LED engine, throwing a strong spot beam forward from the bow without the bulk of a traditional spreader light. Installation is simple, with the light designed to attach directly at the trolling motor mount rather than requiring separate wiring runs or brackets elsewhere on the boat.\u003c\/p\u003e\u003cp\u003eBuilt for real marine use, the Lane Blaster carries an IP68 waterproof rating and a shockproof housing constructed from corrosion proof aluminum and stainless steel, so it stands up to spray, submersion, and the vibration and impact that come with running a trolling motor in rough water. The LED itself is rated for a 50,000 hour service life, and the light uses a patented design. The Lane Blaster name and this headlight are endorsed by BASSMASTER Classic Champion Chris Lane, reflecting its use in tournament fishing conditions. The unit features a black housing with a black lens and a white LED light output.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LED-TMHL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Lane Blaster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Color:\u003c\/strong\u003e White LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 10 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 10 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuminous Output:\u003c\/strong\u003e 1000 lumens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam Type:\u003c\/strong\u003e Spot beam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Rating:\u003c\/strong\u003e IP68\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Life:\u003c\/strong\u003e 50,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum and stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional Features:\u003c\/strong\u003e Waterproof, shockproof, corrosion proof, patented design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Mounts directly to trolling motor mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.71 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572086553\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-H Marine LED-TMHL Lane Blaster headlight used for?\u003c\/strong\u003e It is a trolling motor headlight that mounts directly to a trolling motor mount, giving a focused spot beam for running and working the water in low light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow bright is the LED-TMHL headlight?\u003c\/strong\u003e The Lane Blaster LED-TMHL puts out 1000 lumens from a single 10 watt LED in a spot beam pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-TMHL waterproof?\u003c\/strong\u003e Yes, the LED-TMHL carries an IP68 waterproof rating, making it suitable for exposure to spray and wet marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the LED-TMHL housing made of?\u003c\/strong\u003e The housing is corrosion proof aluminum and stainless steel, with a black finish and a black plastic lens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the LED-TMHL installed?\u003c\/strong\u003e Installation is simple since the LED-TMHL mounts directly to the trolling motor mount rather than requiring a separate bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does the LED last on the LED-TMHL?\u003c\/strong\u003e The LED-TMHL is rated for a 50,000 hour LED life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LED-TMHL shockproof?\u003c\/strong\u003e Yes, the Lane Blaster LED-TMHL headlight is built with a shockproof design to hold up to vibration and impact on the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and wattage does the LED-TMHL require?\u003c\/strong\u003e The LED-TMHL runs on 10 volts and draws 10 watts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the LED-TMHL light and housing?\u003c\/strong\u003e The LED-TMHL has a black housing and black lens with a white LED light output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho endorses the Lane Blaster LED-TMHL headlight?\u003c\/strong\u003e The Lane Blaster LED-TMHL is endorsed by BASSMASTER Classic Champion Chris Lane.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the LED-TMHL weigh?\u003c\/strong\u003e The T-H Marine LED-TMHL headlight weighs 0.71 pounds.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991268077787,"sku":"T-H-LED-TMHL-DP","price":76.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/lane-blaster-led-trolling-motor-headlight-28276615577643.jpg?v=1784498891"},{"product_id":"marinco-spl-12w-wireless-remote-spotlight-100-watt-halogen-12-24-volt-white","title":"Marinco SPL-12W Wireless Remote Spotlight - 100 Watt Halogen, 12\/24 Volt, White","description":"\u003cp\u003eThe Marinco SPL-12W is a wireless remote-controlled spotlight built for boats that need reliable, hands-free searchlight control from the helm. The unit runs on either 12 volt or 24 volt DC input power and drives a 100 watt H3 halogen bulb rated at 210,000 candlepower peak beam intensity, giving it enough throw for scanning shorelines, docks, channel markers, and open water at night. The white housing measures 7.5 inches wide by 7.5 inches high by 9.25 inches deep, a footprint suited to permanent deck or arch mounting.\u003c\/p\u003e\u003cp\u003eControl is handled through the included SPRL-2 wireless bridge remote, which operates the spotlight from up to 200 feet away, so the helm station does not need to run a hardwired joystick or control cable back to the light housing. This simplifies installation and lets the operator reposition the remote or use it from different points on the boat. The spotlight ships as a complete kit: the light housing and its paired wireless remote bridge.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Marinco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SPL-12W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Wireless Remote Spotlight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source Type:\u003c\/strong\u003e Halogen (H3 bulb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 100 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts or 24 volts (DC input)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeak Beam Intensity:\u003c\/strong\u003e 210,000 candlepower\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 7.5 inches wide x 7.5 inches high x 9.25 inches deep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Control:\u003c\/strong\u003e SPRL-2 wireless bridge remote, 200 foot wireless range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBatteries Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Marinco SPL-12W run on?\u003c\/strong\u003e The Marinco SPL-12W operates on either 12 volt or 24 volt DC power, making it compatible with either common marine electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow bright is the SPL-12W spotlight?\u003c\/strong\u003e It puts out 210,000 candlepower peak beam intensity from a 100 watt H3 halogen bulb, enough for scanning docks, channel markers, and open water at night.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SPL-12W come with a remote control?\u003c\/strong\u003e Yes, the Marinco SPL-12W includes an SPRL-2 wireless bridge remote with a 200 foot wireless range, so the light can be aimed without running a hardwired control cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this spotlight?\u003c\/strong\u003e The SPL-12W housing measures 7.5 inches wide by 7.5 inches high by 9.25 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Marinco SPL-12W housing?\u003c\/strong\u003e The housing is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SPL-12W weigh?\u003c\/strong\u003e This spotlight weighs 4.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre batteries included with the SPL-12W?\u003c\/strong\u003e No batteries are included with the Marinco SPL-12W; it wires directly into the boat's 12 volt or 24 volt DC system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of bulb does the SPL-12W use?\u003c\/strong\u003e It uses a 100 watt H3 halogen bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far away can I control the SPL-12W remote?\u003c\/strong\u003e The included SPRL-2 wireless bridge remote controls the SPL-12W from up to 200 feet away.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SPL-12W a wired or wireless spotlight system?\u003c\/strong\u003e The SPL-12W is a wireless remote spotlight; control is handled through the paired SPRL-2 wireless bridge remote rather than a hardwired joystick control.\u003c\/p\u003e","brand":"Marinco","offers":[{"title":"Default Title","offer_id":49025307640027,"sku":"MAR-SPL-12W","price":527.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61NXw_zSRxL_eba50aa1-7541-4419-88f7-3049053028e8.jpg?v=1785330971"},{"product_id":"marinco-hand-held-bridge-remote-splr-1-for-boat-spotlights","title":"Marinco Hand Held Bridge Remote SPLR-1 for Boat Spotlights","description":"\u003cp\u003eThe Marinco SPLR-1 is a hand held bridge remote designed for use with boat spotlights, giving operators wireless control of the spotlight from the helm or bridge without running to the fixture itself. It is built for marine environments and pairs with compatible Marinco spotlight systems to direct the beam as needed while underway or at anchor.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Marinco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SPLR-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Boat Spotlights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 093344051050\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Marinco SPLR-1?\u003c\/strong\u003e The Marinco SPLR-1 is a hand held bridge remote used to control a boat spotlight from the helm or bridge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SPLR-1 weigh?\u003c\/strong\u003e The Marinco SPLR-1 hand held bridge remote weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is the SPLR-1?\u003c\/strong\u003e It is listed under boat spotlights, as a remote control accessory for that product category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SPLR-1 a wired or wireless remote?\u003c\/strong\u003e The SPLR-1 is a hand held remote used to operate a boat spotlight remotely rather than at the fixture itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the SPLR-1 remote?\u003c\/strong\u003e The SPLR-1 is manufactured by Marinco.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SPLR-1 come with a spotlight included?\u003c\/strong\u003e The SPLR-1 is the hand held bridge remote unit itself; it is a control accessory rather than a complete spotlight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Marinco SPLR-1?\u003c\/strong\u003e The UPC for the Marinco SPLR-1 hand held bridge remote is 093344051050.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere would I use a hand held bridge remote like the SPLR-1?\u003c\/strong\u003e A hand held bridge remote such as the SPLR-1 is used on a boat to direct a spotlight from a bridge or helm station.\u003c\/p\u003e","brand":"Marinco","offers":[{"title":"Default Title","offer_id":49025307705563,"sku":"MAR-SPLR-1","price":94.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/mar-splr-1_lg__57083.1558172902.500.750.jpg?v=1785165061"},{"product_id":"marinco-splr-3-wired-bridge-remote-for-boat-spotlights-12-24-volt-hard-wired","title":"Marinco SPLR-3 Wired Bridge Remote for Boat Spotlights, 12\/24 Volt Hard Wired","description":"\u003cp\u003eThe Marinco SPLR-3 is a hard-wired bridge remote that lets you control a boat spotlight from the helm without reaching for the light itself. It runs on either 12 or 24 volt systems and draws a negligible current whether it is idle or actively in use, so it will not put a meaningful load on the boat's electrical system. The remote features 3 buttons for directing spotlight operation from a fixed mounting location on the bridge or helm console.\u003c\/p\u003e\u003cp\u003eHousing is molded from UV resistant PC\/ASA plastic to withstand sun exposure in a marine environment, and the buttons are made of silicone with a glow-in-the-dark feature for easy operation at night. The unit carries an IP54 rating for resistance to dust and splashing water, and is rated for operation across a 5 degree F to 113 degree F temperature range, making it suitable for exposed helm and bridge installations in varying climates.\u003c\/p\u003e\u003cp\u003eCompact dimensions of 3.5 inches wide by 2.25 inches high by 0.75 inches deep allow the SPLR-3 to mount in tight helm panel spaces. At 0.2 pounds, it adds negligible weight to any console installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Marinco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SPLR-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Devices:\u003c\/strong\u003e Spot Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bridge Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring Type:\u003c\/strong\u003e Hard Wired\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 or 24 Volt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e Negligible (idle and in use)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Buttons:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e UV resistant PC\/ASA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButton Material:\u003c\/strong\u003e Silicone (glow in the dark)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.5 inches W x 2.25 inches H x 0.75 inches D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range:\u003c\/strong\u003e 5 degrees F to 113 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 093344053627\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Marinco SPLR-3 do?\u003c\/strong\u003e The SPLR-3 is a hard-wired bridge remote that lets you operate a boat spotlight from a second helm or bridge station instead of the spotlight's primary control point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SPLR-3 wireless?\u003c\/strong\u003e No, the SPLR-3 is a hard wired remote, meaning it connects directly into the spotlight's wiring rather than communicating wirelessly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage systems does the SPLR-3 support?\u003c\/strong\u003e The SPLR-3 is compatible with both 12 volt and 24 volt boat electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much power does this remote draw?\u003c\/strong\u003e Current draw on the Marinco SPLR-3 is negligible both when idle and when actively in use, so it has minimal impact on battery load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the SPLR-3 remote?\u003c\/strong\u003e The Marinco SPLR-3 measures 3.5 inches wide by 2.25 inches high by 0.75 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SPLR-3 weigh?\u003c\/strong\u003e The SPLR-3 weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing made of?\u003c\/strong\u003e The SPLR-3 housing is made of UV resistant PC\/ASA plastic, chosen to hold up to sun exposure in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the buttons glow in the dark?\u003c\/strong\u003e Yes, the SPLR-3 uses silicone buttons with a glow-in-the-dark feature, making them easier to find and use at night.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the IP rating of the SPLR-3?\u003c\/strong\u003e The Marinco SPLR-3 carries an IP54 rating, indicating protection against dust and splashing water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can the SPLR-3 operate in?\u003c\/strong\u003e The SPLR-3 is rated for operation from 5 degrees F to 113 degrees F, suitable for exposed bridge and helm mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many buttons does the SPLR-3 have?\u003c\/strong\u003e The SPLR-3 remote has 3 buttons for controlling spotlight operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the SPLR-3 mounted?\u003c\/strong\u003e The Marinco SPLR-3 is designed as a bridge mount remote, intended to be installed at a bridge or secondary helm station.\u003c\/p\u003e","brand":"Marinco","offers":[{"title":"Default Title","offer_id":49025307738331,"sku":"MAR-SPLR-3","price":54.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/mar-splr-3_lg__14695.1558172941.500.750.jpg?v=1785165061"},{"product_id":"jabsco-directional-switch-43990-0000-for-ray-line-remote-control-spotlights-1986-and-earlier","title":"Jabsco Directional Switch 43990-0000 for Ray-Line Remote Control Spotlights, 1986 and Earlier","description":"\u003cp\u003eThe Jabsco Directional Switch 43990-0000 is an 8-way multi-position directional control switch designed for remote control spotlights. It is built specifically for Ray-Line motor driven remote control spotlights from 1986 and earlier, giving boaters a direct-fit way to restore spotlight aiming control without replacing the entire light unit.\u003c\/p\u003e\u003cp\u003eThe switch uses a rotary actuator with a normally closed SPST circuit and operates on 12 volts DC at 1 amp, drawing 12 watts. Copper contacts and copper construction resist corrosion, which matters for a control switch that is typically panel mounted in a marine helm or cockpit environment where it is exposed to moisture and salt air. Wiring is handled through screw terminals paired with a clamp connector type, and the switch is finished in black.\u003c\/p\u003e\u003cp\u003eMounting hardware is included, and the switch is designed for easy installation on existing panel cutouts sized for this directional switch. Overall dimensions are 1.77 x 3.7 x 3.54 inches, and the unit weighs 0.20625 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 43990-0000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Directional Control Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Ray-Line motor driven remote control spotlights, 1986 and earlier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Operation:\u003c\/strong\u003e 8-way control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Multi-position Directional Control Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e SPST\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e ON-OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 1 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 12 Watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal:\u003c\/strong\u003e Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Rotary\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Type:\u003c\/strong\u003e Remote\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 1.77 x 3.7 x 3.54 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.20625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 671880036917\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRay-Line motor driven remote control spotlights, 1986 and earlier\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJABSCO 439900000\u003c\/li\u003e\n\u003cli\u003eITT439900000\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat spotlights does the Jabsco 43990-0000 directional switch fit?\u003c\/strong\u003e The Jabsco 43990-0000 is designed for Ray-Line motor driven remote control spotlights from 1986 and earlier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch work with newer Ray-Line spotlights?\u003c\/strong\u003e The Jabsco 43990-0000 directional switch is specified for Ray-Line motor driven remote control spotlights from 1986 and earlier only; compatibility with newer models is not established.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with this switch?\u003c\/strong\u003e Yes, the Jabsco 43990-0000 directional switch ships with mounting hardware, and it is designed for easy installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and current does the 43990-0000 switch operate at?\u003c\/strong\u003e This directional switch operates on 12 volts DC and is rated for 1 amp, with a wattage of 12 watts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 43990-0000 switch made of?\u003c\/strong\u003e The Jabsco directional switch uses copper contacts and copper construction, finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many directional positions does this switch control?\u003c\/strong\u003e The Jabsco 43990-0000 is an 8-way directional control switch, allowing multi-position control of a compatible spotlight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this switch on\/off only, or does it have multiple positions?\u003c\/strong\u003e It is a multi-position directional control switch with a rotary actuator, not a simple on\/off toggle, though its electrical operation mode is ON-OFF per circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of circuit does the 43990-0000 use?\u003c\/strong\u003e The switch uses an SPST circuit with normally closed contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the switch wired?\u003c\/strong\u003e The Jabsco 43990-0000 connects using screw terminals with a clamp connector type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this directional switch?\u003c\/strong\u003e The Jabsco 43990-0000 measures 1.77 x 3.7 x 3.54 inches and weighs 0.20625 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this switch mounted?\u003c\/strong\u003e The 43990-0000 is a panel mount switch designed for installation into an existing panel cutout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Jabsco 43990-0000 have any OEM cross-reference numbers?\u003c\/strong\u003e Yes, this switch is also referenced under JABSCO 439900000 and ITT439900000.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028223205595,"sku":"ITT-43990-0000","price":156.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ITT-43990-0000__10639.1722385401.500.750.jpg?v=1785164582"},{"product_id":"taco-marine-20-inch-led-t-top-tube-light-white-red-or-white-blue","title":"TACO Marine 20-Inch LED T-Top Tube Light - White\/Red or White\/Blue","description":"\u003cp\u003eThe TACO Marine 20-Inch LED T-Top Tube Light mounts to a T-top, hardtop, arch, or engine room to deliver dual-color LED illumination from a single low-profile fixture. Each light combines a bright 300-lumen white LED for general deck, cockpit, and work lighting with a low-glare accent LED for close-quarters visibility that won't wash out your night vision. Drawing just 5 watts, the fixture runs efficiently off the boat's 12V system, and the glass lens along with a fully sealed housing stands up to spray, wash-downs, and pounding wake. An 18-foot wiring lead and included mounting clips make installation straightforward on most tube diameters, and the compact 21 x 4 x 3 inch footprint keeps the light unobtrusive when mounted overhead.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: TACO Metals\u003c\/li\u003e\n\u003cli\u003eLight Source: LED, 5 watts\u003c\/li\u003e\n\u003cli\u003eWhite Output: 300 Lumens\u003c\/li\u003e\n\u003cli\u003eAccent Output: 150 Lumens\u003c\/li\u003e\n\u003cli\u003eLens Material: Glass\u003c\/li\u003e\n\u003cli\u003eWiring Cable Length: 18 feet\u003c\/li\u003e\n\u003cli\u003eItem Dimensions: 21 x 4 x 3 inches\u003c\/li\u003e\n\u003cli\u003eWeight: 1.14 pounds\u003c\/li\u003e\n\u003cli\u003eMounting Hardware: Mounting clips included\u003c\/li\u003e\n\u003cli\u003eAssembly Required: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis 20-inch tube light is available with two accent-color pairings: White\/Red for chart-reading and night-vision preservation, or White\/Blue for a cooler-toned accent look and easier man-overboard signaling in some setups. Both share identical dimensions, output, wattage, and mounting hardware, so choose based on the accent color that best fits your boat's lighting scheme and nighttime use.\u003c\/p\u003e","brand":"Taco Marine","offers":[{"title":"White\/Red","offer_id":49047425974491,"sku":"TAC-F38-2060R-1","price":123.5,"currency_code":"USD","in_stock":true},{"title":"White\/Blue","offer_id":49047426007259,"sku":"TAC-F38-2060B-1","price":123.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41ziaRGhdnL_1088d7f4-ce62-4245-8932-a0bc964221bf.jpg?v=1785424082"},{"product_id":"t-h-marine-slim-line-led-utility-strip-light-waterproof-surface-mount-4-to-8","title":"T-H Marine Slim Line LED Utility Strip Light - Waterproof Surface Mount, 4\" to 8\"","description":"\u003cp\u003eThe T-H Marine Slim Line LED Utility Strip Light delivers bright, low-draw accent and task lighting for boats, RVs, and other vehicles, wherever you need a compact, waterproof light source. Each strip is fully submersible, with its circuit board sealed in epoxy to resist water, corrosion, and vibration, so it holds up to spray, rain, and washdowns without failing. Surface mounting makes installation straightforward on interior or exterior panels, gunwales, livewells, storage compartments, and courtesy-light locations. Available in two lengths and LED colors to match the application, from tight red accent lighting to broader white utility illumination.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: T-H Marine\u003c\/li\u003e\n\u003cli\u003eLens: Clear\u003c\/li\u003e\n\u003cli\u003eVoltage: 12 volts\u003c\/li\u003e\n\u003cli\u003eMounting: Surface mount\u003c\/li\u003e\n\u003cli\u003eWater Resistance: Fully submersible, 100 percent waterproof\u003c\/li\u003e\n\u003cli\u003eCircuit Board Protection: Sealed in epoxy to resist water, corrosion, and vibration\u003c\/li\u003e\n\u003cli\u003eVehicle Service Type: Boat\u003c\/li\u003e\n\u003cli\u003eFit Type: Universal Fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis line is available in two configurations: a 4 inch strip with red LEDs for subtle accent or courtesy lighting, and an 8 inch strip with white LEDs for brighter general utility lighting over a wider area. Choose the 4 inch red strip for low-glow ambient or night-safe lighting in cabins, steps, or storage areas; choose the 8 inch white strip when you need stronger, wider-coverage task lighting such as in livewells, engine compartments, or work areas. Both mount the same way and share the same waterproof, epoxy-sealed construction.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"4\" Red","offer_id":49048438800603,"sku":"T-H-LED-51803-DP","price":23.53,"currency_code":"USD","in_stock":false},{"title":"8\" White","offer_id":49048438833371,"sku":"T-H-LED-51810-DP","price":47.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/slim-line-led-utility-strip-lights-28278970384427_4209ce4b-43c6-48b3-bf51-e29c85d75830.jpg?v=1785436602"},{"product_id":"t-h-marine-led-rail-light-with-rotating-rail-and-switch-available-in-6-and-12-lengths","title":"T-H Marine LED Rail Light with Rotating Rail and Switch - Available in 6\" and 12\" Lengths","description":"\u003cp\u003eAdd bright, glare-reducing accent and task lighting anywhere on your boat with the T-H Marine LED Rail Light. Built around a rotating powder coated aluminum extrusion rail, this fixture lets you aim cool white LED light exactly where you need it, whether that is illuminating a rod locker, casting deck light along a gunwale, or brightening a livewell area, then rotate it away when not in use. An integrated rocker switch on the fixture gives you on\/off control right at the light, no separate switch panel wiring required. The frosted lens diffuses the LEDs for even, non-blinding illumination, and the sealed circuit board is built to resist the moisture, humidity, and vibration of the marine environment. Choose the 6 inch rail with 12 LEDs for a compact accent light in tighter spaces, or step up to the 12 inch rail with 24 LEDs for wider, brighter coverage.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: T-H Marine\u003c\/li\u003e\n\u003cli\u003eLight Color: Cool White\u003c\/li\u003e\n\u003cli\u003eSwitch: Integrated rocker switch\u003c\/li\u003e\n\u003cli\u003eMounting Type: Surface mount with molded mounting ends\u003c\/li\u003e\n\u003cli\u003eRail Material: Powder coated aluminum extrusion\u003c\/li\u003e\n\u003cli\u003eLens: Frosted lens\u003c\/li\u003e\n\u003cli\u003eLED Lifespan: Up to 100,000 hours\u003c\/li\u003e\n\u003cli\u003eFit Type: Universal fit\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis rail light comes in two lengths to match the space and brightness you need. The 6 inch version (LED-51857) carries 12 Cool White LEDs and suits smaller mounting areas such as tackle boxes, small lockers, or accent points. The 12 inch version (LED-51858) carries 24 Cool White LEDs for longer runs like gunwales, casting decks, or larger storage compartments where broader, brighter coverage is wanted. Both use the same rotating rail design and integrated switch, so the choice comes down to the length of the mounting surface and how much light output the area requires.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"12\" Rotating Rail, 24 LEDs, with Switch","offer_id":49048446337243,"sku":"T-H-LED-51858-DP","price":50.53,"currency_code":"USD","in_stock":false},{"title":"6\" Rotating Rail, 12 LEDs, with Switch","offer_id":49048446370011,"sku":"T-H-LED-51857-DP","price":37.28,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6-led-rail-light-493840531484_a986bfb8-0c99-4869-a1fe-2cc82dbcc3ad.jpg?v=1785436649"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/lane-blaster-led-trolling-motor-headlight-28276615577643.jpg?v=1785356924","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-lighting-spotlights-utility-lighting.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}