{"title":"Sealants \u0026 Adhesives","description":null,"products":[{"product_id":"sierra-18-9031-1-bellows-adhesive-2-oz-syringe-for-marine-sterndrive-bellows-installation","title":"Sierra Bellows Adhesive 18-9031-1, High-Viscosity Rubber Bonding Cement","description":"\u003cp\u003eSierra Bellows Adhesive 18-9031-1 is a high-viscosity rubber bonding adhesive designed for securing bellows and other rubber components during marine drive and exhaust bellows installation. Formulated as a strong cream-to-paste bonding compound, it is applied directly from a syringe for precise, controlled placement without mess or waste. The clear cured finish keeps the bond line inconspicuous on rubber, metal, glass, and plastic surfaces.\u003c\/p\u003e\u003cp\u003eThis adhesive is a high-viscosity formula, so it stays where it is applied rather than running or dripping during installation, which makes it well suited to vertical and overhead bonding tasks common when fitting bellows around sterndrive and outdrive components. It is packaged in a 59 milliliter syringe as a single unit, giving installers a ready-to-use quantity for one or more bellows jobs. Note that this adhesive is not rated as water resistant, so it should be used as a bonding agent rather than a sealant against water intrusion.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-9031-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Bellows Adhesive 2oz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Cream, Liquid, Paste, Putty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Syringe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume:\u003c\/strong\u003e 59 Milliliters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Material:\u003c\/strong\u003e Glass, Metal, Plastic, Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity Level:\u003c\/strong\u003e High\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance Level:\u003c\/strong\u003e Not Water Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Strong\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Package Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.125 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Sierra Bellows Adhesive 18-9031-1 used for?\u003c\/strong\u003e Sierra 18-9031-1 is a rubber bonding adhesive used to secure bellows and other rubber components in place during installation, such as when fitting drive or exhaust bellows.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much adhesive comes in one syringe of 18-9031-1?\u003c\/strong\u003e Each syringe of Sierra 18-9031-1 contains 59 milliliters of adhesive, packaged as a single unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-9031-1 water resistant?\u003c\/strong\u003e No, Sierra 18-9031-1 is rated as not water resistant, so it functions as a bonding adhesive rather than a waterproof sealant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials does this adhesive bond to?\u003c\/strong\u003e Sierra 18-9031-1 is compatible with glass, metal, plastic, and rubber surfaces, making it suitable for bonding rubber bellows to a range of adjacent materials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat form does the Sierra 18-9031-1 adhesive take?\u003c\/strong\u003e It is a high-viscosity cream, liquid, paste, and putty style compound dispensed from a syringe rather than a thin, free-flowing liquid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the cured adhesive?\u003c\/strong\u003e Sierra 18-9031-1 cures clear, which keeps the bond line inconspicuous on rubber bellows and surrounding components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is Sierra 18-9031-1 applied?\u003c\/strong\u003e The adhesive is dispensed from its syringe container, which allows for controlled, precise application directly to the bonding surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a high-viscosity adhesive like 18-9031-1 for bellows work?\u003c\/strong\u003e The high viscosity of Sierra 18-9031-1 helps it stay in place after application instead of running, which is useful for vertical or overhead bonding around bellows installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order Sierra 18-9031-1?\u003c\/strong\u003e One syringe of Sierra Bellows Adhesive 18-9031-1 is included per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Sierra 18-9031-1 be used on metal parts near a rubber bellows?\u003c\/strong\u003e Yes, Sierra 18-9031-1 is listed as compatible with metal in addition to rubber, glass, and plastic, so it can bond across these adjoining materials.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988435939547,"sku":"SIE-18-9031-1","price":11.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-9031-1__77648.1739477161.500.750.jpg?v=1785188288"},{"product_id":"pettit-anchortech-premium-fast-dry-adhesive-sealant-white-10-1-oz-cartridge","title":"Pettit AnchorTech Premium Fast Dry Adhesive Sealant, White, 10.1 oz Cartridge","description":"\u003cp\u003ePettit AnchorTech Premium Fast Dry Adhesive Sealant is a hybrid polyurethane adhesive sealant built for boat builders, repair techs, and DIY owners who need a permanent, waterproof bond above or below the waterline. It can be applied and will cure while submerged, and it forms a 100% waterproof seal once cured, making it suitable for through-hull hardware, hull seams, deck fittings, and other wet-environment bonding and sealing jobs. The gunnable, non-sag paste has excellent green strength, meaning it grabs and holds immediately on application, so parts stay in place without extensive clamping or taping while the bond sets.\u003c\/p\u003e\u003cp\u003eThe formula offers a high elongation of 350% and tolerates joint movement of plus or minus 25%, giving it the flexibility to handle vibration, flexing, and thermal expansion without cracking or losing its seal. It is paintable once cured, so finished joints can be color-matched to the surrounding surface. Application is possible in temperatures as low as 41 degrees F, and the sealant will not freeze in storage, making it practical for cold-weather boatyards. It adheres to wood, aluminum, most metals, vinyl, most plastics, glass, fiberglass, and most other common boat building materials, covering the majority of adhesive and sealing needs on a typical vessel.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1600520\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Adhesive Sealant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Polymer:\u003c\/strong\u003e Polyurethane hybrid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Paste (gunnable, non-sag)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge Size:\u003c\/strong\u003e 10.1 ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 24.3 linear feet at 1\/4 inch diameter bead; 16.2 linear feet at 3\/8 inch diameter bead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoint Movement:\u003c\/strong\u003e Plus or minus 25 percent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElongation:\u003c\/strong\u003e 350 percent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure Time:\u003c\/strong\u003e 24 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTack-Free Time:\u003c\/strong\u003e 1 hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooling Time:\u003c\/strong\u003e 20 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn to Service Time:\u003c\/strong\u003e 24 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Ready Time:\u003c\/strong\u003e 24 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Ready Time:\u003c\/strong\u003e 24 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temperature Range:\u003c\/strong\u003e 41 F to 95 F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFreeze-Thaw Stability:\u003c\/strong\u003e Will not freeze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Waterproof; approved for permanent water submersion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdheres To:\u003c\/strong\u003e Wood, aluminum, most metals, vinyl, most plastics, glass, fiberglass, and most common boat building materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469029859\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan this sealant be applied underwater?\u003c\/strong\u003e Yes, Pettit AnchorTech Premium Fast Dry Adhesive Sealant can be applied below the waterline and cures underwater, and it forms a 100% waterproof seal approved for permanent submersion once fully cured.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does Pettit AnchorTech take to cure?\u003c\/strong\u003e Full cure time is 24 hours. Tack-free time is 1 hour, tooling time is 20 minutes, and the joint is ready for water exposure or paint after 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Pettit AnchorTech paintable?\u003c\/strong\u003e Yes. Pettit AnchorTech Premium Fast Dry Adhesive Sealant is paintable, and it is paint-ready 24 hours after application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces does this sealant bond to?\u003c\/strong\u003e It adheres to wood, aluminum, most metals, vinyl, most plastics, glass, fiberglass, and most other common boat building materials, including teak.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size cartridge does Pettit AnchorTech come in?\u003c\/strong\u003e Pettit AnchorTech (Pettit part number 1600520) is packaged as a 10.1 ounce cartridge, weighing 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much bead coverage does one cartridge provide?\u003c\/strong\u003e One cartridge covers 24.3 linear feet at a 1\/4 inch diameter bead, or 16.2 linear feet at a 3\/8 inch diameter bead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the sealant crack if the joint flexes or vibrates?\u003c\/strong\u003e No. The formula has 350 percent elongation and tolerates joint movement of plus or minus 25 percent, so it stays flexible under vibration and thermal expansion without cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Pettit AnchorTech available in?\u003c\/strong\u003e This cartridge (Pettit part number 1600520) is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Pettit AnchorTech be applied in cold weather?\u003c\/strong\u003e It can be applied at temperatures as low as 41 degrees F and up to 95 degrees F, and the product will not freeze in storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a paste or a liquid sealant?\u003c\/strong\u003e Pettit AnchorTech is a gunnable, non-sag paste, which means it holds its shape in vertical or overhead joints without running or sagging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the sealant grip immediately after application?\u003c\/strong\u003e Yes, it has strong initial green strength, giving instant grab-and-hold characteristics so parts stay positioned while the sealant cures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat base chemistry is Pettit AnchorTech built on?\u003c\/strong\u003e It is a hybrid polyurethane adhesive sealant, formulated for permanent, waterproof marine bonding and sealing.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":49017618104539,"sku":"PET-6005C","price":19.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41TrtjlNvSL.jpg?v=1785331048"},{"product_id":"3m-4200-fast-cure-polyurethane-marine-adhesive-sealant-white-10-oz-cartridge","title":"3M 4200 Fast Cure Polyurethane Marine Adhesive Sealant, White, 10 oz Cartridge","description":"\u003cp\u003e3M 4200 Fast Cure is a one-component, medium-strength, moisture-curing polyurethane adhesive-sealant built for marine bonding and sealing jobs both above and below the waterline. It is a gap-filling formula that delivers strong, flexible bonds to aluminum, wood, gelcoat, and fiberglass, and it stays flexible after curing so it can absorb the stress of shock, vibration, and hull swelling or shrinking without cracking or losing its seal. Because it is a medium-strength bond, parts sealed with 3M 4200 can still be disassembled later without the damage a permanent adhesive would cause.\u003c\/p\u003e\u003cp\u003eThis is the fast-cure version of the 3M 4200 line: it becomes tack-free in about 1 hour and typically reaches a full cure in 24 hours, so projects move along faster than with standard-cure sealants. It comes in a 10 fluid ounce (295 milliliter) cartridge sized for a standard caulking gun, in white.\u003c\/p\u003e\u003cp\u003eRecommended applications include fiberglass deck-to-hull joints, wood-to-fiberglass bonding, portholes, deck fittings, rubrail attachment, sealing screw holes, and stanchion supports. It forms a watertight, weather-resistant seal that is designed to hold up in marine environments where materials contract and expand and hardware is exposed to constant vibration and water exposure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e 3M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MMM06560\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaulking Type:\u003c\/strong\u003e Polyurethane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Cartridge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume:\u003c\/strong\u003e 10 fluid ounces (295 milliliters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Liquid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure Type:\u003c\/strong\u003e Fast cure, moisture-curing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTack-Free Time:\u003c\/strong\u003e 1 hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Cure Time:\u003c\/strong\u003e 24 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Watertight above and below the waterline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyurethane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 051135065600\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is 3M 4200 Fast Cure used for?\u003c\/strong\u003e 3M 4200 Fast Cure (MMM06560) is a polyurethane adhesive-sealant used for fiberglass deck-to-hull joints, wood-to-fiberglass bonding, portholes, deck fittings, rubrail attachment, sealing screw holes, and stanchion supports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this sealant be used below the waterline?\u003c\/strong\u003e Yes, 3M 4200 Fast Cure forms a watertight, weather-resistant seal designed for use both above and below the waterline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does 3M 4200 Fast Cure take to cure?\u003c\/strong\u003e It becomes tack-free in about 1 hour and typically reaches a full cure in 24 hours, which is faster than standard-cure polyurethane sealants.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials does 3M 4200 bond to?\u003c\/strong\u003e 3M 4200 Fast Cure bonds to aluminum, wood, gelcoat, and fiberglass, making it suitable for joining dissimilar boat-building materials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 3M 4200 a permanent adhesive?\u003c\/strong\u003e No, MMM06560 is a medium-strength adhesive-sealant, so bonded parts can still be disassembled later without damage, unlike a permanent high-strength adhesive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 3M 4200 Fast Cure cartridge?\u003c\/strong\u003e The 10 fluid ounce cartridge of 3M 4200 Fast Cure is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 3M 4200 Fast Cure cartridge hold?\u003c\/strong\u003e Each cartridge of MMM06560 holds 10 fluid ounces (295 milliliters), sized to fit a standard caulking gun.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 3M 4200 stay flexible after it cures?\u003c\/strong\u003e Yes, 3M 4200 Fast Cure remains flexible once cured, which lets it absorb stress from shock, vibration, and hull swelling or shrinking without cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between 3M 4200 Fast Cure and standard 3M 4200?\u003c\/strong\u003e The fast-cure version of 3M 4200, MMM06560, is tack-free in around 1 hour and fully cures in about 24 hours, giving quicker handling time than the standard-cure formula.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 3M 4200 Fast Cure cartridge weigh?\u003c\/strong\u003e The 10 oz cartridge of 3M 4200 Fast Cure (MMM06560) weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 3M 4200 gap-filling?\u003c\/strong\u003e Yes, 3M 4200 Fast Cure is a gap-filling polyurethane formula, which helps it seal irregular joints and fastener holes on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat application tool does 3M 4200 Fast Cure require?\u003c\/strong\u003e MMM06560 comes in a caulking gun tube, so it is applied with a standard manual or pneumatic caulking gun.\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":49027423305947,"sku":"3-M-06560","price":43.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/593147__39056.1722503542.500.750.jpg?v=1785163224"},{"product_id":"gorilla-clear-repair-tape-9-yards-crystal-clear-waterproof-repair-tape","title":"Gorilla Clear Repair Tape, 9 Yards, Crystal Clear Waterproof Repair Tape","description":"\u003cp\u003eGorilla Clear Repair Tape is a crystal-clear, non-yellowing repair tape built on Gorilla Tape's heavy-duty, extra-thick adhesive layer. It is designed to bond to a wide range of surfaces, including wet surfaces, and can even be applied underwater, making it a practical choice for boat owners handling repairs in damp or exposed conditions. The tape is UV and temperature resistant, so it holds up to sun exposure and varying weather rather than breaking down or peeling after a season on deck.\u003c\/p\u003e\u003cp\u003eThe extra-thick adhesive layer creates a strong, durable bond while the tape itself stays flexible, conforming easily to uneven or curved surfaces for a more secure hold. Because it goes on clear, it is suited to repairs where a visible black or silver patch would be unwanted, while still delivering the strength Gorilla Tape is known for. It works on both dry and wet surfaces, giving it flexibility for indoor projects as well as outdoor and marine repairs. Each roll provides 9 yards of tape for multiple repairs or a single larger job.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gorilla\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e GORL6027002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Repair Tape\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 9 yards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Crystal Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive:\u003c\/strong\u003e Heavy-duty, extra-thick adhesive layer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof:\u003c\/strong\u003e Works underwater and on wet surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Resistant:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Resistant:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Compatibility:\u003c\/strong\u003e Wet and dry surfaces, indoor and outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 052427602701\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan Gorilla Clear Repair Tape be applied underwater?\u003c\/strong\u003e Yes, Gorilla Clear Repair Tape (GORL6027002) can be applied underwater, making it suitable for repairs on wet surfaces or below the waterline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this tape actually clear, or does it yellow over time?\u003c\/strong\u003e Gorilla Clear Repair Tape is crystal clear and non-yellowing, so the repair stays transparent rather than discoloring with age or sun exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is one roll of Gorilla Clear Repair Tape?\u003c\/strong\u003e Each roll of Gorilla Clear Repair Tape (GORL6027002) provides 9 yards of tape.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this tape hold up in the sun or in hot and cold conditions?\u003c\/strong\u003e Yes, Gorilla Clear Repair Tape is UV and temperature resistant, so it withstands harsh sunlight and varying temperatures without breaking down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Gorilla Clear Repair Tape work on uneven or curved surfaces?\u003c\/strong\u003e Yes, the tape is flexible and conforms easily to uneven surfaces, which helps it form a more secure hold on curved or irregular repair areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a roll of this tape weigh?\u003c\/strong\u003e A roll of Gorilla Clear Repair Tape (GORL6027002) weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this tape be used on both dry and wet surfaces?\u003c\/strong\u003e Gorilla Clear Repair Tape can be applied to both dry and wet surfaces, giving it flexibility for indoor projects as well as outdoor and marine repairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes the adhesive on this tape different from standard tape?\u003c\/strong\u003e Gorilla Clear Repair Tape uses a heavy-duty, extra-thick adhesive layer that provides a stronger bond and greater durability than standard tape adhesives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Gorilla Clear Repair Tape suited for outdoor use?\u003c\/strong\u003e Yes, its UV and temperature resistance make Gorilla Clear Repair Tape suitable for a wide range of outdoor projects and repairs, not just indoor use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for Gorilla Clear Repair Tape?\u003c\/strong\u003e The UPC for Gorilla Clear Repair Tape (GORL6027002) is 052427602701.\u003c\/p\u003e","brand":"Gorilla Glue","offers":[{"title":"Default Title","offer_id":49027464397019,"sku":"G-G-6027002","price":10.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/G-G-6027002__78454.1747363868.500.750.jpg?v=1785164267"},{"product_id":"gorilla-handy-tape-roll-1-inch-x-10-yard-heavy-duty-all-weather-tape","title":"Gorilla Handy Tape Roll, 1 Inch x 10 Yard Heavy-Duty All-Weather Tape","description":"\u003cp\u003eThe Gorilla Handy Tape Roll is a compact, heavy-duty adhesive tape built for quick, reliable repairs wherever you need them. Sized for small jobs and tight storage spots, it is designed to stick to rough, uneven, and unforgiving surfaces where ordinary tape fails, and it can also be used to clamp surfaces together while an adhesive or repair sets. A reinforced backing gives the tape added strength for demanding tasks, while a tough all-weather shell keeps it performing in harsh outdoor conditions. The tape is hand-tearable, so it can be applied cleanly without scissors or a knife, making it fast to use in the field or under the hood. At a portable 1 inch by 10 yard roll size, it fits easily in a toolbox, tackle bag, glove box, or camping kit, making it a practical stand-by for boat owners, campers, and anyone who needs a dependable emergency fix on hand. Whether it is a quick hold on a cracked hose, a torn cover, or a loose fitting, this roll is built to go wherever the job takes you.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gorilla\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e GORL6100101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1 inch x 10 yards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking:\u003c\/strong\u003e Reinforced backing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShell:\u003c\/strong\u003e All-weather shell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTear Style:\u003c\/strong\u003e Hand-tearable, no tools required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 052427610010\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Gorilla Handy Tape Roll?\u003c\/strong\u003e The Gorilla Handy Tape Roll measures 1 inch by 10 yards, a compact size made for on-the-go repairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this tape be torn by hand?\u003c\/strong\u003e Yes, the Gorilla Handy Tape Roll is hand-tearable, so it can be applied without scissors or a knife.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill Gorilla Handy Tape Roll stick to rough or uneven surfaces?\u003c\/strong\u003e It is made to stick to rough, uneven, and unforgiving surfaces, which is one of its main design purposes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Gorilla Handy Tape Roll weatherproof?\u003c\/strong\u003e It has a tough all-weather shell that is resistant to harsh elements, so it holds up in outdoor and challenging conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Gorilla Handy Tape Roll weigh?\u003c\/strong\u003e This roll weighs 0.3 pounds, making it light enough to carry in a toolbox, glove box, or bag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this tape be used for clamping instead of just patching?\u003c\/strong\u003e Yes, the Gorilla Handy Tape Roll can also be used to clamp surfaces together, not just to cover or patch a repair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes this tape different from a standard roll of duct tape?\u003c\/strong\u003e The Gorilla Handy Tape Roll has a reinforced backing and all-weather shell for added strength and durability compared to standard light-duty tapes, while still being small enough for quick, portable use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Gorilla Handy Tape Roll good for a marine toolbox or glove box?\u003c\/strong\u003e Its compact 1 inch by 10 yard size makes it a practical addition to a toolbox, car, or camping gear for quick repairs on the go.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Gorilla Handy Tape Roll?\u003c\/strong\u003e The Gorilla Handy Tape Roll carries UPC 052427610010.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for the Gorilla Handy Tape Roll?\u003c\/strong\u003e The Gorilla Handy Tape Roll is identified by manufacturer part number GORL6100101.\u003c\/p\u003e","brand":"Gorilla Glue","offers":[{"title":"Default Title","offer_id":49027464429787,"sku":"G-G-6100101","price":4.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/G-G-6100101__65919.1747363868.500.750.jpg?v=1785164267"},{"product_id":"jb-weld-marine-weld-25ml-two-part-epoxy-adhesive-2350-psi-bond-for-metal-aluminum-fiberglass-and-wood","title":"JB Weld Marine Weld 25ml Two-Part Epoxy Adhesive, 2350 PSI Bond for Metal, Aluminum, Fiberglass and Wood","description":"\u003cp\u003eJB Weld Marine Weld 25ml is a two-part epoxy adhesive formulated for strong, long-lasting repairs on metal, aluminum, SMC fiberglass, and other surfaces commonly found on boats and marine equipment. It mixes at a simple 1:1 ratio, making it easy to prepare accurate amounts for small or large repairs. Once mixed, Marine Weld sets in just 5 minutes and reaches a full cure in 1 hour, after which the bond can be sanded, drilled, filled, and tapped like the base material itself.\u003c\/p\u003e\u003cp\u003eThe cured epoxy dries to a white color and delivers a tensile strength of 2350 PSI, giving it the holding power needed for structural repairs, filling gaps, and rebuilding damaged surfaces. It is suited for use with aluminum and other metals, and can also be used with fiberglass and wood, making it a versatile option for general boat maintenance and repair work where a fast-setting, durable bond is required.\u003c\/p\u003e\u003cp\u003eTo use, remove the replaceable cap, press down on the plunger, and squeeze an equal amount from each side onto a disposable surface, then mix thoroughly before applying with an appropriate tool in an even coat, weld bead, or extruded shape as needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JB Weld\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e JBWE50172\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Two-Part Epoxy Adhesive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume:\u003c\/strong\u003e 25 ml\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix Ratio:\u003c\/strong\u003e 1:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Strength:\u003c\/strong\u003e 2350 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet Time:\u003c\/strong\u003e 5 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure Time:\u003c\/strong\u003e 1 hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Aluminum, metal, fiberglass, wood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is JB Weld Marine Weld 25ml used for?\u003c\/strong\u003e It is a two-part epoxy adhesive designed for strong, long-lasting repairs on metal, aluminum, SMC fiberglass, and other surfaces, making it well suited for general boat repair and maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does Marine Weld take to set and cure?\u003c\/strong\u003e JB Weld Marine Weld sets in 5 minutes and reaches a full cure in 1 hour, after which it can be sanded, drilled, filled, and tapped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mixing ratio for this epoxy?\u003c\/strong\u003e Marine Weld 25ml mixes at a 1:1 ratio, so you press down on the plunger and squeeze an equal amount from each side before combining.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow strong is the bond once cured?\u003c\/strong\u003e Once fully cured, JB Weld Marine Weld has a tensile strength of 2350 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does Marine Weld dry to?\u003c\/strong\u003e The epoxy dries to a white color once set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials can Marine Weld be used on?\u003c\/strong\u003e JB Weld Marine Weld 25ml can be used with aluminum, other metals, fiberglass, and wood.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Marine Weld be sanded or drilled after curing?\u003c\/strong\u003e Yes, after the 1 hour cure time, the JBWE50172 epoxy bond can be sanded, drilled, filled, and tapped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much product does one syringe contain?\u003c\/strong\u003e JBWE50172 comes in a 25 ml syringe format.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I apply this epoxy?\u003c\/strong\u003e Remove the replaceable cap, press the plunger to dispense an equal amount from each side onto a disposable surface, mix thoroughly, then apply with an appropriate tool in an even coat, weld bead, or extruded shape as needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does JB Weld Marine Weld 25ml weigh?\u003c\/strong\u003e The JBWE50172 syringe weighs 0.2 pounds.\u003c\/p\u003e","brand":"JB Weld","offers":[{"title":"Default Title","offer_id":49027469934811,"sku":"JBW-50172","price":8.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/JBW-50172__69336.1747363851.500.750.jpg?v=1785164385"},{"product_id":"j-b-weld-original-syringe-epoxy-25ml-two-part-adhesive-for-metal-plastic-and-pvc","title":"J-B Weld Original Syringe Epoxy 25ml, Two-Part Adhesive for Metal, Plastic and PVC","description":"\u003cp\u003eJ-B Weld Original Syringe 25ml is a quick-setting, multipurpose two-part epoxy built for strong, lasting bonds on plastic and PVC, fiberglass, glass, ABS, composites, and vinyl, and it also works on metals. The syringe design keeps both epoxy components separate until use, with a re-sealable cap that prevents drying out and leaking so the syringe can be used multiple times instead of hardening after a single application. Dispense equal amounts of each side for a simple 1:1 mix ratio, then combine thoroughly before applying.\u003c\/p\u003e\u003cp\u003eAt room temperature, the mixed epoxy sets in 4-6 hours and reaches full cure in 15 to 24 hours, curing to a dark gray color. Once cured, it forms a hard bond with a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit. It is suitable for automotive use as well as general repairs on metals, plastics, composite, and PVC surfaces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JB Weld\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 50165\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Two-Part Epoxy Syringe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume:\u003c\/strong\u003e 25ml\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix Ratio:\u003c\/strong\u003e 1:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet Time:\u003c\/strong\u003e 4-6 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure Time:\u003c\/strong\u003e 15 to 24 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Strength:\u003c\/strong\u003e 5020 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCured Color:\u003c\/strong\u003e Dark gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Temperature Resistance:\u003c\/strong\u003e 550 degrees Fahrenheit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials Bonded:\u003c\/strong\u003e Metals, plastics, composite, and PVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 043425501653\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces does the JB Weld Original Syringe 25ml (part 50165) bond?\u003c\/strong\u003e It bonds plastic and PVC, fiberglass, glass, ABS, composites, and vinyl, and it also works on metals, making the JB Weld 50165 syringe suitable for a wide range of repairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does it take to set and fully cure?\u003c\/strong\u003e The JB Weld 50165 epoxy sets in 4-6 hours at room temperature and reaches full cure in 15 to 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the cured epoxy turn?\u003c\/strong\u003e It cures to a dark gray color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow strong is the bond once cured?\u003c\/strong\u003e Once fully cured, JB Weld 50165 reaches a tensile strength of 5020 PSI, forming a hard, durable bond.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mix ratio for this epoxy?\u003c\/strong\u003e JB Weld 50165 uses a simple 1:1 mix ratio, with equal amounts of each component dispensed from the syringe and mixed thoroughly before application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this epoxy be reused after the first application?\u003c\/strong\u003e Yes. The syringe has a re-sealable cap that prevents the epoxy from drying out and leaking, so the JB Weld 50165 syringe can be used for multiple applications rather than hardening after one use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature can the cured epoxy withstand?\u003c\/strong\u003e Once fully cured, JB Weld 50165 can withstand temperatures up to 550 degrees Fahrenheit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this epoxy suitable for automotive repairs?\u003c\/strong\u003e Yes, JB Weld 50165 is suitable for automotive use in addition to general repairs on metals, plastics, composite, and PVC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much epoxy is in each syringe?\u003c\/strong\u003e Each JB Weld 50165 syringe contains 25ml of two-part epoxy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this epoxy work on glass and ceramics?\u003c\/strong\u003e It bonds glass among its listed surfaces, along with plastic and PVC, fiberglass, ABS, composites, and vinyl.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I apply the JB Weld Original Syringe epoxy?\u003c\/strong\u003e Dispense equal amounts of both components from the syringe onto a surface, mix thoroughly, then apply to the repair area before the 4-6 hour set time begins.\u003c\/p\u003e","brand":"JB Weld","offers":[{"title":"Default Title","offer_id":49027469967579,"sku":"JBW-50165","price":7.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/JBW-50165__72524.1747363850.500.750.jpg?v=1785164386"},{"product_id":"jb-weld-clearweld-syringe-25ml-two-part-epoxy-clear-finish-3900-psi-bond-strength","title":"JB Weld ClearWeld Syringe 25ml Two-Part Epoxy, Clear Finish, 3900 PSI Bond Strength","description":"\u003cp\u003eJB Weld ClearWeld Syringe 25ml is a quick-setting, multipurpose two-part epoxy formulated to deliver a strong, lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood, and metal. It is specially designed to cure with a clear, transparent finish when applied at a thickness of less than 15 mil, making it well suited for repairs where appearance matters as much as strength. With a simple 1:1 mix ratio, ClearWeld sets in just 5 minutes and reaches full cure within 1 hour, so repairs can be completed and put back into service quickly. Once cured, it forms a strong, permanent bond rated at 3900 PSI tensile strength and can withstand temperatures up to 250 degrees.\u003c\/p\u003e\u003cp\u003eTo use, remove the replacement cap, press down on the plunger, and squeeze equal amounts of both parts onto a disposable surface, then mix thoroughly. Apply with an appropriate tool in an even coat, weld bead, or extruded shape as needed. ClearWeld bonds to aluminum, copper, iron, and steel metals; PVC, ABS, and flexible plastics; and other materials such as wood, stone, fiberglass, glass, and ceramic, making it a versatile option for general repair, craft, and light marine maintenance tasks.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JB Weld\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e JBWE50112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Two-Part Epoxy Adhesive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume:\u003c\/strong\u003e 25ml\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix Ratio:\u003c\/strong\u003e 1:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet Time:\u003c\/strong\u003e 5 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure Time:\u003c\/strong\u003e 1 hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Strength:\u003c\/strong\u003e 3900 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCured Color:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Temperature Resistance:\u003c\/strong\u003e 250 degrees Fahrenheit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Metals:\u003c\/strong\u003e Aluminum, Copper, Iron, and Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Plastics:\u003c\/strong\u003e PVC, ABS, and Flexible Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther Compatible Materials:\u003c\/strong\u003e Wood, Stone, Fiberglass, Glass, and Ceramic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is JB Weld ClearWeld Syringe 25ml used for?\u003c\/strong\u003e JBWE50112 is a quick-setting two-part epoxy designed for strong, lasting repairs on tile, most plastics, ceramic, glass, wood, and metal, with a clear finish that suits visible repairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does ClearWeld take to set and cure?\u003c\/strong\u003e ClearWeld sets in 5 minutes and fully cures within 1 hour after mixing the two parts of JBWE50112 in a 1:1 ratio.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes ClearWeld dry clear or a different color?\u003c\/strong\u003e Yes, JBWE50112 cures to a clear, transparent finish when applied at a thickness of less than 15 mil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow strong is the bond once JBWE50112 is cured?\u003c\/strong\u003e Once fully cured, ClearWeld forms a strong, permanent bond with a tensile strength of 3900 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mixing ratio for JB Weld ClearWeld?\u003c\/strong\u003e JBWE50112 uses a simple 1:1 mix ratio, with equal amounts of both parts squeezed from the syringe and mixed thoroughly before application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces and materials does ClearWeld bond to?\u003c\/strong\u003e JBWE50112 bonds to aluminum, copper, iron, and steel metals; PVC, ABS, and flexible plastics; and wood, stone, fiberglass, glass, and ceramic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the JB Weld ClearWeld syringe weigh?\u003c\/strong\u003e The JBWE50112 syringe weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature can ClearWeld withstand once cured?\u003c\/strong\u003e JBWE50112 is rated to withstand temperatures up to 250 degrees Fahrenheit after curing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I apply JB Weld ClearWeld?\u003c\/strong\u003e Remove the replacement cap from JBWE50112, press the plunger to squeeze equal amounts of both parts onto a disposable surface, mix thoroughly, then apply with an appropriate tool in an even coat, weld bead, or extruded shape.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the syringe be reused after opening?\u003c\/strong\u003e JBWE50112 comes with a replacement cap for the syringe, allowing it to be resealed between uses rather than requiring the full 25ml to be used at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much product does the JB Weld ClearWeld syringe contain?\u003c\/strong\u003e JBWE50112 is packaged as a 25ml syringe of two-part epoxy.\u003c\/p\u003e","brand":"JB Weld","offers":[{"title":"Default Title","offer_id":49027470000347,"sku":"JBW-50112","price":5.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/JBW-50112__67091.1747363850.500.750.jpg?v=1785164385"},{"product_id":"jb-weld-waterweld-2oz-epoxy-putty-underwater-repair-for-boats-plumbing-and-fuel-tanks","title":"JB Weld Waterweld 2oz Epoxy Putty, Underwater Repair for Boats, Plumbing, and Fuel Tanks","description":"\u003cp\u003eJB Weld Waterweld 2oz is a kneadable epoxy putty made to plug or seal leaks, holes, and cracks in almost anything, including plumbing, fuel tanks, tubs and showers, drains, pools and spas, boats, and potable water tanks. Its standout feature is that it can be applied and will set up even underwater, making it a practical fix for below-the-waterline hull repairs, thru-hull leaks, and other wet or submerged surfaces where a standard adhesive cannot be used. To apply, the putty is thoroughly kneaded with the fingers until it reaches a uniform off-white color, then pressed firmly onto the surface that needs repair. Waterweld begins to set in 25 minutes and cures hard within one hour. Once fully cured, the repair can be drilled, tapped, filed, sanded, and painted, allowing it to be finished and blended into the surrounding surface. The cured epoxy reaches a strength of 4370 PSI and will withstand water pressure up to 500 PSI and temperatures up to 250 degrees F, giving it the durability needed for ongoing exposure to water and heat. It bonds well to aluminum and fiberglass and is also suited to automotive use. This makes JB Weld Waterweld a versatile, go-to repair compound for boat owners and anyone dealing with a leak that needs a fast, waterproof fix.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e JB Weld\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e JBWE8277\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Waterweld Epoxy Putty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrength:\u003c\/strong\u003e 4370 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Pressure Resistance:\u003c\/strong\u003e up to 500 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Resistance:\u003c\/strong\u003e up to 250 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart Time (Set Time):\u003c\/strong\u003e 25 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure Time:\u003c\/strong\u003e 1 hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor, Cured:\u003c\/strong\u003e Off White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Aluminum, Fiberglass, Automotive surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnderwater Application:\u003c\/strong\u003e Yes, can be applied and set underwater\/wet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishing:\u003c\/strong\u003e Can be drilled, tapped, filed, sanded, and painted once cured\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan JB Weld Waterweld be applied underwater?\u003c\/strong\u003e Yes, JB Weld Waterweld epoxy putty can be applied and will set up even underwater, which is why it works for below-the-waterline hull repairs and other submerged leaks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does Waterweld take to set and cure?\u003c\/strong\u003e Waterweld begins to set in 25 minutes and cures hard within 1 hour, after which it can be drilled, tapped, filed, sanded, and painted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the strength of JB Weld Waterweld once cured?\u003c\/strong\u003e Once fully cured, JB Weld Waterweld (part JBWE8277) reaches a strength of 4370 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat water pressure and temperature can Waterweld handle?\u003c\/strong\u003e JB Weld Waterweld will withstand water pressure up to 500 PSI and temperatures up to 250 degrees F once cured.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces and materials does Waterweld bond to?\u003c\/strong\u003e Waterweld can be used with aluminum and fiberglass, and it is also suitable for automotive applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you mix and apply JB Weld Waterweld?\u003c\/strong\u003e The putty is thoroughly kneaded with the fingers until it reaches a uniform color, then pressed firmly onto the surface being repaired; no separate mixing tool is needed since it is a single kneadable putty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Waterweld once it cures?\u003c\/strong\u003e JB Weld Waterweld cures to an off-white color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Waterweld be painted or drilled after it cures?\u003c\/strong\u003e Yes, once fully cured, JB Weld Waterweld can be drilled, tapped, filed, sanded, and painted to finish the repair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat can JB Weld Waterweld be used to repair?\u003c\/strong\u003e This epoxy putty is designed to plug or seal leaks, holes, and cracks in plumbing, fuel tanks, tubs and showers, drains, pools and spas, boats, and potable water tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the JB Weld Waterweld put weigh?\u003c\/strong\u003e The JB Weld Waterweld 2oz putty (JBWE8277) weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs JB Weld Waterweld a two-part epoxy that needs separate mixing?\u003c\/strong\u003e No, Waterweld is a single kneadable epoxy putty, unlike two-part epoxies that require mixing equal amounts of two components; it is ready to knead and apply directly from the stick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Waterweld suitable for fuel tank repairs?\u003c\/strong\u003e Yes, JB Weld Waterweld is intended for use on fuel tanks as well as plumbing, tubs and showers, drains, pools and spas, boats, and potable water tanks.\u003c\/p\u003e","brand":"JB Weld","offers":[{"title":"Default Title","offer_id":49027470131419,"sku":"JBW-8277","price":7.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/JBW-8277__19234.1747363851.500.750.jpg?v=1785164385"},{"product_id":"marine-tex-gluvit-waterproof-epoxy-sealer-2-lb-quart-kit-amber","title":"Marine-Tex Gluvit Waterproof Epoxy Sealer, 2 lb Quart Kit, Amber","description":"\u003cp\u003eMarine-Tex Gluvit Waterproof Epoxy Sealer is a two-part epoxy barrier coat formulated to protect and repair hulls, decks, and structural wood on boats. It is designed for fiberglass, wood, aluminum, and steel, bridging and sealing hairline cracks, pinholes, and leaky seams while forming a protective barrier against water absorption and corrosion. On aluminum hulls it seals rivets and leaks around cabins or decks, and it can be applied to the outside of an aluminum gas tank as a corrosion barrier (it is not resistant to gasoline and should not be used to coat the inside of a fuel tank). Deteriorated wood on decks and hulls can be renewed as Gluvit penetrates into the material to add strength.\u003c\/p\u003e\u003cp\u003eThis 2 lb quart-size kit is a 1:1 by-can, 5-parts-resin-to-1-part-hardener (by volume) epoxy system. Once mixed, it offers about 60 minutes of working time at 72 degrees Fahrenheit and is applied by brush or roller at 6-8 mils film thickness. The first coat cures in 12 hours at 72 degrees Fahrenheit, after which a second coat can be applied; full hardening occurs overnight, with 48 hours at 72 degrees Fahrenheit needed to reach maximum strength. Because Gluvit is not UV stable, it must be top-coated with a pigmented epoxy, urethane, latex, or alkyd paint after curing for lasting protection. The kit is amber in color and the resin container is intentionally slack-filled to leave room for thorough power mixing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Marine-Tex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RM330K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Gluvit Waterproof Epoxy Sealer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Two-part liquid epoxy (resin and hardener)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Amber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Size:\u003c\/strong\u003e 2 lb quart kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 25-35 square feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix Ratio:\u003c\/strong\u003e 5 parts resin to 1 part hardener by volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot Life \/ Working Time:\u003c\/strong\u003e 60 minutes at 72 degrees Fahrenheit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Application Thickness:\u003c\/strong\u003e 6-8 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure Time:\u003c\/strong\u003e 24-30 hours at 72 degrees Fahrenheit (48 hours for maximum strength)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Fiberglass, wood, aluminum, steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 705643302008\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Marine-Tex Gluvit used for?\u003c\/strong\u003e Gluvit Waterproof Epoxy Sealer (RM330K) is a two-part epoxy barrier coat used to seal and protect boat hulls and decks made of fiberglass, wood, aluminum, or steel, bridging hairline cracks and filling minor pinholes and leaky seams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much surface area does the 2 lb kit cover?\u003c\/strong\u003e This 2 lb quart-size kit of Gluvit covers approximately 25-35 square feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mix ratio for Gluvit epoxy?\u003c\/strong\u003e Gluvit is mixed at a ratio of 5 parts resin to 1 part hardener by volume, with the full kit contents combined and mixed thoroughly for 3-4 minutes if using the entire kit at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does Gluvit take to cure?\u003c\/strong\u003e At 72 degrees Fahrenheit, Gluvit's first coat cures in about 12 hours, hardens overnight, and reaches maximum strength after 48 hours; full cure of the barrier coat itself takes 24-30 hours at that temperature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the working time once Gluvit is mixed?\u003c\/strong\u003e Once the resin and hardener are combined, Gluvit RM330K offers about 60 minutes of working time (pot life) at 72 degrees Fahrenheit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Gluvit need to be painted after it cures?\u003c\/strong\u003e Yes, Gluvit should be top-coated with a pigmented epoxy, urethane, latex, or alkyd-based marine paint after curing, since UV exposure will otherwise cause the epoxy to chalk and potentially crack over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Gluvit be used to coat the inside of a fuel tank?\u003c\/strong\u003e No, Gluvit is not resistant to gasoline and should not be used inside a gas tank; it can, however, be applied to the outside of an aluminum gas tank as a corrosion barrier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials can Gluvit be applied to?\u003c\/strong\u003e Gluvit RM330K bonds to fiberglass, wood, aluminum, and steel, making it suitable for sealing hulls, decks, seams, and rivets across most common boatbuilding materials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the resin container only partially full?\u003c\/strong\u003e The resin can for Gluvit RM330K is intentionally slack-filled because materials are packaged by weight, leaving room for a power mixer to fully blend the resin and hardener in one container.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Gluvit be tinted with pigment?\u003c\/strong\u003e Yes, an epoxy-friendly pigment can be added to Gluvit, up to a maximum of 5 percent of the total epoxy volume; this will tint the amber epoxy but will not achieve a dark color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick should Gluvit be applied?\u003c\/strong\u003e Gluvit RM330K is applied with a brush or roller at a film thickness of 6-8 mils per coat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Gluvit be applied at low temperatures?\u003c\/strong\u003e If ambient temperature is below 50 degrees Fahrenheit, the Gluvit product and work area should be pre-conditioned to at least 55 degrees Fahrenheit before application, since working time and cure both lengthen in cooler conditions.\u003c\/p\u003e","brand":"ITW Marine Tex","offers":[{"title":"Default Title","offer_id":49027996745947,"sku":"ITW-RM330K","price":73.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/itw-rm330k_lg__04141.1558180257.500.750.jpg?v=1785164430"},{"product_id":"permatex-the-right-stuff-34423-high-temp-red-silicone-gasket-maker-3-oz-1-minute-cure","title":"Permatex The Right Stuff 34423 High Temp Red Silicone Gasket Maker, 3 oz, 1 Minute Cure","description":"\u003cp\u003ePermatex The Right Stuff 34423 is a high temperature red silicone gasket maker packaged in a 3 ounce container. It forms a one piece, formed-in-place gasket directly on the part, replacing cut gaskets on applications such as exhaust manifolds, turbochargers, and slip-fit exhaust parts. The red RTV silicone formula is OEM specified and sensor safe, meaning it will not interfere with oxygen sensors or other vehicle sensors during and after application.\u003c\/p\u003e\u003cp\u003eThe Right Stuff cures fast, returning the vehicle or equipment to service in as little as 1 minute, which reduces downtime compared to slower-curing gasket makers. Once cured, the formed gasket resists intermittent temperatures up to 650 degrees Fahrenheit, making it suited to high heat exhaust and engine locations where standard sealants can fail. Because it forms a single continuous piece rather than a jointed gasket, it resists failure from vibration and thermal expansion, common causes of gasket leaks over time.\u003c\/p\u003e\u003cp\u003ePermatex 34423 is intended for exhaust manifolds, turbochargers, and slip-fit exhaust connections, and is applied directly from the container without the need for a separate gasket material.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Permatex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 34423\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e The Right Stuff 1 Minute High Temp Red Silicone Gasket Maker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size:\u003c\/strong\u003e 3 ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 686226344236\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure Time:\u003c\/strong\u003e 1 minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Intermittent Temperature Resistance:\u003c\/strong\u003e 650 degrees Fahrenheit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormula Type:\u003c\/strong\u003e RTV silicone, sensor safe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Applications:\u003c\/strong\u003e Exhaust manifolds, turbochargers, slip-fit exhaust parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eIdeal for exhaust manifolds, turbochargers, and slip-fit exhaust parts.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Permatex 34423 The Right Stuff used for?\u003c\/strong\u003e Permatex The Right Stuff 34423 is a high temperature red silicone gasket maker used to form a one piece, formed-in-place gasket, most commonly on exhaust manifolds, turbochargers, and slip-fit exhaust parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does Permatex The Right Stuff 34423 take to cure?\u003c\/strong\u003e It cures in as little as 1 minute, allowing the vehicle or equipment to be returned to service quickly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperatures can this gasket maker withstand?\u003c\/strong\u003e The cured red silicone formed by Permatex 34423 resists intermittent temperatures up to 650 degrees Fahrenheit, which suits high heat exhaust locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Permatex 34423 safe to use near oxygen sensors?\u003c\/strong\u003e Yes, this RTV silicone formula is sensor safe and OEM specified, so it will not damage or interfere with vehicle sensors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much product comes in one container of Permatex 34423?\u003c\/strong\u003e Each container of The Right Stuff 34423 holds 3 ounces of red silicone gasket maker.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the cured gasket made by Permatex 34423?\u003c\/strong\u003e The Right Stuff 34423 is a red RTV silicone, and the gasket it forms retains that red color once cured.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Permatex 34423 be used in place of a cut exhaust gasket?\u003c\/strong\u003e Yes, this product is designed to create a one piece, formed-in-place gasket directly on exhaust manifolds, turbochargers, and slip-fit exhaust parts in place of a cut gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy won't the gasket formed by Permatex 34423 fail from vibration?\u003c\/strong\u003e Because it cures into a single continuous formed gasket rather than a jointed one, Permatex The Right Stuff 34423 resists failure from vibration and thermal expansion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a container of Permatex 34423 weigh?\u003c\/strong\u003e A 3 ounce container of Permatex The Right Stuff 34423 weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Permatex 34423 require clamping to work?\u003c\/strong\u003e The Right Stuff 34423 forms a gasket in place on the part; its high temperature red RTV silicone formula is designed for direct application to exhaust manifolds, turbochargers, and slip-fit exhaust connections.\u003c\/p\u003e","brand":"Permatex","offers":[{"title":"Default Title","offer_id":49028203249883,"sku":"PER-34423","price":24.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PER-34423__52299.1747363845.500.750.jpg?v=1785165305"},{"product_id":"permatex-contact-cement-1-5-oz-multi-surface-adhesive-part-25905","title":"Permatex Contact Cement 1.5 oz Multi-Surface Adhesive, Part 25905","description":"\u003cp\u003ePermatex Contact Cement (part 25905) is a 1.5 oz adhesive that creates a permanent bond on contact, with no clamping required. It is formulated for use on metal, wood, ceramic, leather, rubber, and other surfaces, making it a versatile choice for repairs around the boat, shop, or garage where a fast, dependable bond is needed without holding parts under pressure while they cure.\u003c\/p\u003e\u003cp\u003eThis contact cement instantly bonds rubber to glass or metal, forming a tough, permanent bond as soon as the surfaces make contact. It is heat and water resistant, so the bond holds up in conditions where moisture and temperature swings would cause other adhesives to fail. Its instant-set nature makes it well suited to jobs like applying weatherstripping, where you need the material to stay in place the moment you press it down rather than waiting on a slow cure.\u003c\/p\u003e\u003cp\u003eBecause no clamping is required, Permatex Contact Cement 25905 is a practical option for jobs where clamps cannot reach the bonding surface or where holding parts together during cure is impractical. The 1.5 oz size is suited to smaller repair and bonding jobs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Permatex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 25905\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Contact Cement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Contents:\u003c\/strong\u003e 1.5 ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 686226259059\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Surfaces:\u003c\/strong\u003e Metal, wood, ceramic, leather, rubber, and other surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamping Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond Type:\u003c\/strong\u003e Instant, permanent bond on contact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance:\u003c\/strong\u003e Heat and water resistant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces does Permatex Contact Cement 25905 bond?\u003c\/strong\u003e Permatex Contact Cement 25905 is formulated for metal, wood, ceramic, leather, rubber, and other surfaces, including instantly bonding rubber to glass or metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to clamp the parts while this cement cures?\u003c\/strong\u003e No. Permatex Contact Cement 25905 creates a permanent bond on contact and does not require clamping while it sets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the bottle hold?\u003c\/strong\u003e This Permatex Contact Cement comes in a 1.5 ounce size, part number 25905.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this adhesive water resistant once cured?\u003c\/strong\u003e Yes, Permatex Contact Cement 25905 is both heat and water resistant after it bonds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cement be used to install weatherstripping?\u003c\/strong\u003e Yes, the instant bond of Permatex Contact Cement 25905 makes it well suited to applications like installing weatherstripping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does Permatex Contact Cement bond?\u003c\/strong\u003e Permatex Contact Cement 25905 bonds instantly on contact, forming a tough permanent bond without a wait time or clamping step.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cement work on rubber-to-metal repairs?\u003c\/strong\u003e Yes, Permatex Contact Cement 25905 instantly bonds rubber to metal as well as rubber to glass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Permatex 25905 a permanent adhesive or a temporary fix?\u003c\/strong\u003e It forms a permanent bond on contact; Permatex Contact Cement 25905 is not designed as a repositionable or temporary adhesive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for Permatex Contact Cement 1.5 oz?\u003c\/strong\u003e The UPC for Permatex Contact Cement 25905 is 686226259059.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this product weigh for shipping purposes?\u003c\/strong\u003e Permatex Contact Cement 25905 weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cement be used on leather repairs?\u003c\/strong\u003e Yes, leather is one of the listed surfaces for Permatex Contact Cement 25905, along with metal, wood, ceramic, and rubber.\u003c\/p\u003e","brand":"Permatex","offers":[{"title":"Default Title","offer_id":49028203315419,"sku":"PER-25905","price":4.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PER-25905__42198.1747363850.500.750.jpg?v=1785165301"},{"product_id":"permatex-the-right-stuff-black-silicone-gasket-maker-1-minute-cure-3-oz","title":"Permatex The Right Stuff Black Silicone Gasket Maker, 1-Minute Cure, 3 oz","description":"\u003cp\u003ePermatex The Right Stuff Black Silicone Gasket Maker is a fast-curing RTV silicone sealant that forms a leak-proof elastomeric seal around virtually any surface, replacing the need for a traditional cut gasket. It is designed for oil pans, timing covers, transmission pans, and similar sealing applications where a durable, form-in-place gasket is needed. The formula returns the equipment to service in just 1 minute, making it well suited for repairs where downtime matters.\u003c\/p\u003e\u003cp\u003eThis sealant is highly flexible once cured, allowing it to absorb vibration and movement without cracking. It is a sensor-safe RTV silicone formula, so it will not interfere with oxygen sensors or other engine sensors. The Right Stuff is also oil resistant and holds up to weathering and thermal cycling, forming a fully bonded seal that resists hardening, shrinking, and cracking over time compared to conventional gaskets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Permatex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 25229\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e The Right Stuff 1-Minute Black Silicone Gasket Maker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume:\u003c\/strong\u003e 3 oz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure Time:\u003c\/strong\u003e 1 minute to return to service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormula Type:\u003c\/strong\u003e RTV silicone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor Safe:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil Resistant:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 686226252296\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Permatex The Right Stuff Black Silicone Gasket Maker used for?\u003c\/strong\u003e Permatex 25229 is used to create a leak-proof, form-in-place gasket seal around parts such as oil pans, timing covers, and transmission pans, in place of a traditional cut gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does the black RTV silicone take to cure?\u003c\/strong\u003e The Right Stuff 1-minute formula (Permatex 25229) allows the sealed equipment to be returned to service in just 1 minute after application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this sealant safe to use near oxygen sensors?\u003c\/strong\u003e Yes, Permatex 25229 is a sensor-safe RTV silicone formula, meaning it will not damage or interfere with oxygen sensors or similar engine sensors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this gasket maker hold up to engine oil exposure?\u003c\/strong\u003e Yes, the Permatex 25229 formula is oil resistant, which makes it suitable for sealing components like oil pans that see constant oil contact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much sealant is in one tube of Permatex 25229?\u003c\/strong\u003e Each tube of Permatex The Right Stuff Black Silicone Gasket Maker contains 3 oz of product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this product replace a cut gasket entirely?\u003c\/strong\u003e Yes, Permatex 25229 is designed to create a fully formed elastomeric seal on its own, functioning as a longer lasting and more reliable alternative to a traditional cut gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this sealant handle vibration without cracking?\u003c\/strong\u003e Yes, once cured the black silicone in Permatex 25229 is highly flexible, allowing it to flex with vibration and thermal cycling rather than hardening, shrinking, or cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Permatex 25229 once applied?\u003c\/strong\u003e Permatex The Right Stuff Silicone Gasket Maker, part number 25229, cures to a black finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the same as Permatex High Strength Threadlocker?\u003c\/strong\u003e No, Permatex 25229 is a silicone gasket maker for sealing flat surfaces like pans and covers, which is a different product from Permatex threadlocker used to secure threaded fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the black formula differ from the red high-temp version?\u003c\/strong\u003e Permatex 25229 is the black 1-minute formula intended for general gasket applications such as oil pans and timing covers, while the red version is formulated specifically for high-temperature areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill Permatex 25229 resist weathering over time?\u003c\/strong\u003e Yes, once cured, the sealant resists weathering and damage from thermal cycling without hardening, shrinking, or cracking.\u003c\/p\u003e","brand":"Permatex","offers":[{"title":"Default Title","offer_id":49028203348187,"sku":"PER-25229","price":24.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PER-25229__40844.1747363845.500.750.jpg?v=1785165301"},{"product_id":"permatex-high-performance-thread-sealant-50ml-tapered-metal-pipe-fittings-perm56521","title":"Permatex High Performance Thread Sealant 50ml, Tapered Metal Pipe Fittings, PERM56521","description":"\u003cp\u003ePermatex High Performance Thread Sealant (PERM56521) is a 50ml formula built specifically for tapered metal pipe thread fittings. It cures rapidly, allowing the fitting to be repositioned after application before the seal fully sets, and once cured it withstands pressures up to 10,000 PSI.\u003c\/p\u003e\u003cp\u003eThis sealant is designed to prevent galling between metal threads while protecting them from rust and corrosion. It creates a durable seal that resists leakage caused by vibration, temperature changes, and extreme pressure, making it suited for fittings that experience repeated thermal cycling or mechanical stress. Because it is formulated for tapered metal pipe threads, it is well suited to plumbing, fuel, hydraulic, and other pressurized pipe-fitting connections where a reliable, long-lasting thread seal is required.\u003c\/p\u003e\u003cp\u003eEach tube contains 50ml of sealant, providing enough product for multiple fitting applications. The thread sealant is packaged for immediate use straight from the tube, with no mixing or additional preparation required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Permatex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PERM56521\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Thread Sealant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume:\u003c\/strong\u003e 50 milliliters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pressure Rating:\u003c\/strong\u003e 10,000 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Tapered metal pipe thread fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Properties:\u003c\/strong\u003e Repositionable after application; rust and corrosion resistant; prevents thread galling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Permatex Thread Sealant PERM56521 used for?\u003c\/strong\u003e PERM56521 is a high performance thread sealant formulated specifically for tapered metal pipe thread fittings, used to create a leak-free seal on pressurized fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much pressure can this thread sealant withstand?\u003c\/strong\u003e Once cured, Permatex High Performance Thread Sealant withstands pressures up to 10,000 PSI, making it suitable for high-pressure pipe fitting applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reposition a fitting after applying the sealant?\u003c\/strong\u003e Yes, PERM56521 allows repositioning of the fitting after application, giving you time to align the connection before the seal fully cures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much sealant comes in one tube?\u003c\/strong\u003e Each tube of Permatex High Performance Thread Sealant contains 50ml of product, part number PERM56521.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this sealant protect against corrosion?\u003c\/strong\u003e Yes, in addition to sealing threads, PERM56521 protects metal threads from rust and corrosion while preventing galling between fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this sealant suitable for fuel or hydraulic fittings?\u003c\/strong\u003e Permatex High Performance Thread Sealant is formulated for tapered metal pipe thread fittings and is designed to resist leakage from vibration, temperature changes, and extreme pressure, making it appropriate for pressurized pipe connections such as fuel and hydraulic fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this sealant prevent leaks caused by vibration?\u003c\/strong\u003e Yes, PERM56521 is formulated to prevent leakage from vibration, temperature changes, and extreme pressure once cured on a tapered pipe thread fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of fittings does this sealant work on?\u003c\/strong\u003e This sealant is formulated specifically for tapered metal pipe thread fittings, not straight-thread or non-metal fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is Permatex Thread Sealant PERM56521 applied?\u003c\/strong\u003e The sealant is applied directly to the tapered metal pipe threads from the 50ml tube before assembling the fitting; it cures in place to form the seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the sealant prevent thread galling?\u003c\/strong\u003e Yes, one of the key benefits of PERM56521 is that it prevents galling between metal threads during fitting assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a tube of this thread sealant weigh?\u003c\/strong\u003e A 50ml tube of Permatex High Performance Thread Sealant, PERM56521, weighs 0.2 pounds.\u003c\/p\u003e","brand":"Permatex","offers":[{"title":"Default Title","offer_id":49028203282651,"sku":"PER-56521","price":16.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PER-56521__20810.1747363845.500.750.jpg?v=1785165305"},{"product_id":"permatex-ultra-red-rtv-silicone-gasket-maker-3-oz-high-temperature-sensor-safe-sealant","title":"Permatex Ultra Red RTV Silicone Gasket Maker, 3 oz, High-Temperature Sensor-Safe Sealant","description":"\u003cp\u003ePermatex Ultra Red RTV Silicone Gasket Maker is a high-temperature silicone sealant designed for demanding automotive and marine engine applications. This advanced, low-odor formula withstands continuous temperatures up to 650 degrees F (343 degrees C), surpassing the performance of earlier red RTV formulas and holding up under extreme thermal cycling. It is sensor-safe and non-corrosive, making it suitable for use on engines equipped with oxygen sensors and other electronic components without risk of damage or false readings.\u003c\/p\u003e\u003cp\u003eThis 3 oz tube replaces pre-cut gaskets and is engineered for use on exhaust manifolds, headers, turbochargers, and slip-fit exhaust system connections, where conventional gasket materials break down under sustained heat and vibration. The silicone cures to form a durable, flexible seal that maintains its bond through repeated heat-up and cool-down cycles, helping prevent leaks at high-stress sealing points.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Permatex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 81630\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Ultra Red RTV Silicone Gasket Maker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Contents:\u003c\/strong\u003e 3 fluid ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e RTV silicone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Temperature Resistance:\u003c\/strong\u003e 650 degrees F (343 degrees C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 686226816306\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor-Safe:\u003c\/strong\u003e Yes, non-corrosive formula\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Applications:\u003c\/strong\u003e Exhaust manifolds, headers, turbochargers, slip-fit exhaust systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal automotive and marine sealing applications; not specific to a particular make, model, or engine.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eReplaces pre-cut gaskets in high-temperature sealing applications; no specific OEM cross-reference part numbers apply.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature can Permatex Ultra Red RTV Silicone Gasket Maker withstand?\u003c\/strong\u003e It withstands continuous temperatures up to 650 degrees F (343 degrees C), making Permatex part 81630 suitable for high-heat areas like exhaust manifolds and turbochargers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this RTV safe to use near oxygen sensors?\u003c\/strong\u003e Yes, Permatex Ultra Red RTV (part 81630) is a sensor-safe, non-corrosive formula that will not damage oxygen sensors or other electronic engine components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much sealant is in one tube of Permatex 81630?\u003c\/strong\u003e Each tube contains 3 fluid ounces of Ultra Red RTV silicone and weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this product replace a pre-cut gasket?\u003c\/strong\u003e Yes, Permatex Ultra Red RTV Silicone Gasket Maker is formulated to replace pre-cut gaskets in applications subject to high heat and thermal cycling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does Permatex Ultra Red RTV cure to?\u003c\/strong\u003e The sealant is red in color, both as applied and after curing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should Permatex 81630 be used on an engine?\u003c\/strong\u003e It is recommended for exhaust manifolds, headers, turbochargers, and slip-fit exhaust system connections where extreme thermal cycling occurs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Ultra Red RTV have a strong odor?\u003c\/strong\u003e No, Permatex Ultra Red RTV Silicone Gasket Maker uses a low-odor formula, an improvement over earlier red RTV products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Permatex Ultra Red RTV corrosive to metal engine parts?\u003c\/strong\u003e No, this is a non-corrosive silicone formula, safe for use on metal engine components and sensors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does Ultra Red RTV compare to earlier red RTV sealants?\u003c\/strong\u003e Permatex Ultra Red RTV Silicone Gasket Maker outperforms previous generation red RTV formulations, offering higher heat resistance up to 650 degrees F and a lower-odor application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this sealant suitable for engines with high thermal cycling?\u003c\/strong\u003e Yes, Permatex part 81630 is specifically designed for environments with extreme thermal cycling, such as exhaust and turbocharger systems.\u003c\/p\u003e","brand":"Permatex","offers":[{"title":"Default Title","offer_id":49028203544795,"sku":"PER-81630","price":9.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PER-81630__85230.1747363874.500.750.jpg?v=1785165305"},{"product_id":"permatex-ultra-blue-rtv-silicone-gasket-maker-3-oz-sensor-safe-oem-sealant","title":"Permatex Ultra Blue RTV Silicone Gasket Maker, 3 oz - Sensor-Safe OEM Sealant","description":"\u003cp\u003ePermatex Ultra Blue RTV Silicone Gasket Maker is a versatile, sensor-safe sealant engineered to meet OEM performance requirements while delivering long-lasting durability for general-purpose automotive use. This non-corrosive, low-odor silicone formula is safe for oxygen sensors and other electronic components, making it suitable for use on modern, sensor-equipped engines without risk of contamination or malfunction. It provides excellent resistance to automotive fluids and vibration, and it bonds strongly even to oily surfaces where many sealants fail to adhere.\u003c\/p\u003e\u003cp\u003eUltra Blue is designed to replace paper, rubber, cork, and pre-formed gaskets, eliminating the need to source a pre-cut gasket for many general-purpose sealing jobs. It cures to form a flexible, durable seal that withstands temperatures from -65 degrees F to 500 degrees F (-54 degrees C to 260 degrees C) intermittently, covering a wide range of under-hood applications from valve covers to housings and other bolted joints exposed to heat cycling and vibration.\u003c\/p\u003e\u003cp\u003eThis 3 oz tube is sized for shop or garage use and is intended for general automotive sealing and gasket-making tasks rather than extreme-heat exhaust applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Permatex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PERM81724\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Ultra Blue RTV Silicone Gasket Maker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume:\u003c\/strong\u003e 3 oz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e -65 degrees F to 500 degrees F (-54 degrees C to 260 degrees C) intermittently\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor Safe:\u003c\/strong\u003e Yes, safe for oxygen sensors and electronic components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosive:\u003c\/strong\u003e Non-corrosive formula\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOdor:\u003c\/strong\u003e Low odor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeets OEM Standards:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Permatex Ultra Blue RTV Silicone Gasket Maker used for?\u003c\/strong\u003e Permatex Ultra Blue RTV Silicone Gasket Maker (PERM81724) is a general-purpose automotive silicone sealant used to form gaskets in place of paper, rubber, cork, or pre-formed gaskets on a wide range of under-hood components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Ultra Blue RTV safe to use near oxygen sensors?\u003c\/strong\u003e Yes, Ultra Blue RTV is a sensor-safe, non-corrosive formula, so it will not damage oxygen sensors or other electronic engine components during use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can Ultra Blue RTV handle?\u003c\/strong\u003e PERM81724 withstands temperatures from -65 degrees F to 500 degrees F (-54 degrees C to 260 degrees C) intermittently, covering typical under-hood heat cycling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the tube of Ultra Blue RTV weigh?\u003c\/strong\u003e The 3 oz tube of Permatex Ultra Blue RTV Silicone Gasket Maker weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill Ultra Blue RTV bond to oily surfaces?\u003c\/strong\u003e Yes, this formula adheres strongly to oily surfaces, which is useful when a perfectly clean, degreased surface isn't achievable before sealing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Ultra Blue RTV meet OEM specifications?\u003c\/strong\u003e Permatex Ultra Blue RTV Silicone Gasket Maker is engineered to meet OEM performance requirements, making it suitable as a factory-equivalent sealant for general automotive gasket applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Ultra Blue RTV replace a pre-cut gasket?\u003c\/strong\u003e It can replace paper, rubber, cork, and pre-formed gaskets in general-purpose applications, eliminating the need to source a specific pre-cut gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is Ultra Blue different from Permatex Ultra Black or Ultra Red RTV?\u003c\/strong\u003e Ultra Blue is formulated for general-purpose automotive sealing with a -65 degrees F to 500 degrees F intermittent range, while Permatex's Ultra Black is built for oil-resistant seals on timing covers and oil pans, and Ultra Red is rated for higher-heat exhaust applications up to 650 degrees F. Choose PERM81724 for general under-hood sealing rather than high-heat exhaust or heavy oil-exposure jobs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Ultra Blue RTV resist vibration once cured?\u003c\/strong\u003e Yes, once cured this silicone sealant provides excellent resistance to vibration as well as exposure to automotive fluids.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an authentic Permatex product?\u003c\/strong\u003e Yes, PERM81724 is genuine Permatex Ultra Blue RTV Silicone Gasket Maker, not a generic or off-brand substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size does Ultra Blue RTV Silicone Gasket Maker come in?\u003c\/strong\u003e Permatex Ultra Blue RTV Silicone Gasket Maker (PERM81724) is packaged in a 3 oz tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Ultra Blue RTV low odor?\u003c\/strong\u003e Yes, this is a low-odor formula, making it more comfortable to work with in enclosed shop spaces compared to stronger-smelling sealants.\u003c\/p\u003e","brand":"Permatex","offers":[{"title":"Default Title","offer_id":49028203577563,"sku":"PER-81724","price":8.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PER-81724__38003.1747363873.500.750.jpg?v=1785165310"},{"product_id":"permatex-all-purpose-spray-adhesive-16oz-permanent-and-repositionable-bonding-82019","title":"Permatex All-Purpose Spray Adhesive 16oz - Permanent and Repositionable Bonding, 82019","description":"\u003cp\u003ePermatex All-Purpose Spray Adhesive is a 16oz aerosol adhesive formulated for both permanent and repositionable bonding. Its unique formula resists water and humidity, creating a lasting bond that will not bleed through the materials it is applied to. This adhesive is suitable for both porous and nonporous materials and will not shrink over time, making it a reliable choice for a wide range of bonding projects.\u003c\/p\u003e\u003cp\u003eThis spray adhesive is well suited for attaching upholstery cloth, carpeting, floor mats, insulation, and similar materials where a strong, lasting hold is needed without warping or shrinking the bonded surfaces. The repositionable bonding option gives you a window to reposition material before the bond fully sets, while the permanent bonding option delivers a lasting hold for finished installations.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Permatex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 82019\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e All-Purpose Spray Adhesive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 16 oz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 686226820198\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding Type:\u003c\/strong\u003e Permanent and repositionable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Compatibility:\u003c\/strong\u003e Porous and nonporous materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater\/Humidity Resistance:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBleed-Through Resistance:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShrinkage:\u003c\/strong\u003e Will not shrink over time\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Permatex 82019 used for?\u003c\/strong\u003e Permatex 82019 is an all-purpose spray adhesive designed for attaching upholstery cloth, carpeting, floor mats, insulation, and similar materials that need a strong, lasting bond.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this adhesive be used on both porous and nonporous surfaces?\u003c\/strong\u003e Yes, the Permatex All-Purpose Spray Adhesive 16oz is formulated to adhere to both porous and nonporous materials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Permatex 82019 spray adhesive offer a permanent bond or a repositionable one?\u003c\/strong\u003e Both options are available with this adhesive: it can be used for permanent bonding or for repositionable bonding, depending on how it is applied.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the adhesive bleed through fabric or upholstery?\u003c\/strong\u003e No, the Permatex All-Purpose Spray Adhesive is formulated so it won't bleed through the material it is applied to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this spray adhesive resistant to water or humidity?\u003c\/strong\u003e Yes, Permatex 82019 resists water and humidity to help maintain a lasting bond in damp conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the adhesive shrink over time after it cures?\u003c\/strong\u003e No, this adhesive will not shrink over time once applied and cured.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size can does Permatex 82019 come in?\u003c\/strong\u003e Permatex All-Purpose Spray Adhesive is packaged in a 16oz aerosol can, part number 82019.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Permatex 82019 spray adhesive weigh?\u003c\/strong\u003e The 16oz can of Permatex All-Purpose Spray Adhesive weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this adhesive for automotive interior work like carpeting or floor mats?\u003c\/strong\u003e Yes, Permatex 82019 is well suited for automotive interior applications including carpeting, floor mats, and insulation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Permatex 82019 suitable for headliner or insulation installation?\u003c\/strong\u003e Yes, the all-purpose formula is designed to bond insulation and similar materials with a strong, lasting hold.\u003c\/p\u003e","brand":"Permatex","offers":[{"title":"Default Title","offer_id":49028203610331,"sku":"PER-82019","price":11.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PER-82019__65388.1747363846.500.750.jpg?v=1785165310"},{"product_id":"permatex-ultra-grey-rtv-silicone-gasket-maker-3-5-oz-tube-perm82194","title":"Permatex Ultra Grey RTV Silicone Gasket Maker, 3.5 oz Tube - PERM82194","description":"\u003cp\u003ePermatex Ultra Grey RTV Silicone Gasket Maker (PERM82194) is a 3.5 oz tube of high-torque, non-corrosive silicone sealant formulated to meet OEM specifications for silicone gaskets. It is engineered for applications that demand strong rigidity and resistance to vibration, making it well suited for tight bolt patterns and high-torque flange joints where a standard general-purpose sealant would not hold up as well. The low-odor, non-corrosive formula cures to form a durable, flexible gasket in place, sealing surfaces against oil, coolant, and other automotive and marine fluids.\u003c\/p\u003e\u003cp\u003eUltra Grey is commonly used on water pumps, intake manifold end seals, thermostat housings, and valve covers, anywhere a rigid, high-strength seal is needed to withstand engine heat and vibration over time. Because it forms its own gasket on application, it eliminates the need to source a die-cut gasket for many of these jobs while still meeting OEM silicone gasket standards for fit and performance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Permatex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PERM82194\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Ultra Grey RTV Silicone Gasket Maker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume:\u003c\/strong\u003e 3.5 ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 686226001139\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e RTV Silicone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormula:\u003c\/strong\u003e Low-odor, non-corrosive, high-torque, OEM specified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical Applications:\u003c\/strong\u003e Water pumps, intake manifold end seals, thermostat housings, valve covers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Permatex Ultra Grey RTV Silicone Gasket Maker used for?\u003c\/strong\u003e Permatex Ultra Grey RTV Silicone Gasket Maker (PERM82194) is used to form a rigid, high-torque silicone gasket in place on applications such as water pumps, intake manifold end seals, thermostat housings, and valve covers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a tube of Ultra Grey RTV Silicone Gasket Maker contain?\u003c\/strong\u003e Each tube of Permatex Ultra Grey RTV Silicone Gasket Maker, part number PERM82194, contains 3.5 ounces of sealant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Permatex Ultra Grey non-corrosive and low odor?\u003c\/strong\u003e Yes, PERM82194 uses a low-odor, non-corrosive formula, which makes it safe for use around sensitive engine components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Ultra Grey RTV meet OEM gasket specifications?\u003c\/strong\u003e Permatex Ultra Grey (PERM82194) is formulated to meet OEM specifications for silicone gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose Ultra Grey over a standard RTV silicone sealant?\u003c\/strong\u003e Ultra Grey RTV Silicone Gasket Maker is designed for high torque and rigidity, which makes PERM82194 a better fit for tight bolt patterns than a general-purpose RTV sealant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Ultra Grey be used on valve covers?\u003c\/strong\u003e Yes, valve covers are one of the applications Permatex lists for the Ultra Grey RTV Silicone Gasket Maker, PERM82194.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Ultra Grey suitable for intake manifold end seals?\u003c\/strong\u003e Yes, PERM82194 is intended for use on intake manifold end seals along with water pumps, thermostat housings, and valve covers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Permatex Ultra Grey RTV Silicone Gasket Maker?\u003c\/strong\u003e As its name indicates, PERM82194 cures to a grey color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a tube of PERM82194 weigh?\u003c\/strong\u003e A tube of Permatex Ultra Grey RTV Silicone Gasket Maker, PERM82194, weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an authentic Permatex product?\u003c\/strong\u003e Yes, PERM82194 is the genuine Permatex Ultra Grey RTV Silicone Gasket Maker in the 3.5 ounce tube size.\u003c\/p\u003e","brand":"Permatex","offers":[{"title":"Default Title","offer_id":49028203643099,"sku":"PER-82194","price":7.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PER-82194__34967.1747363846.500.750.jpg?v=1785165311"},{"product_id":"permatex-ultra-black-rtv-silicone-gasket-maker-3-oz-sensor-safe-non-corrosive-formula","title":"Permatex Ultra Black RTV Silicone Gasket Maker, 3 oz, Sensor-Safe Non-Corrosive Formula","description":"\u003cp\u003ePermatex Ultra Black RTV Silicone Gasket Maker is a 3 oz silicone sealant built for applications that demand strong adhesion and long-term durability under exposure to oils and vibration. It uses a patented adhesion system that delivers outstanding flexibility along with superior oil resistance, so the seal stays flexible and intact rather than hardening and cracking over time. The formula is sensor-safe, non-corrosive, and low-odor, meeting OE silicone gasket specifications, which makes it suitable for use around oxygen sensors and other sensitive automotive electronics without risking damage or false readings.\u003c\/p\u003e\u003cp\u003eThis gasket maker is designed for sealing timing covers, transmission pans, and oil pans, where a durable, oil-resistant seal is essential to prevent leaks under ongoing thermal cycling and engine vibration. Because it resists automotive fluids and shop chemicals in addition to oil, it holds up in the harsh under-hood environment where lesser sealants break down. The black color matches OEM gasket material for a factory-correct appearance on visible engine components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Permatex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 82180\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3 oz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormula:\u003c\/strong\u003e RTV silicone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOdor Level:\u003c\/strong\u003e Low odor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor Safe:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Properties:\u003c\/strong\u003e Non-corrosive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Permatex Ultra Black RTV Silicone Gasket Maker used for?\u003c\/strong\u003e Permatex Ultra Black (part number 82180) is used to seal timing covers, transmission pans, and oil pans where strong adhesion and oil resistance are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this gasket maker safe to use near oxygen sensors?\u003c\/strong\u003e Yes, Permatex Ultra Black uses a sensor-safe formula, meaning it will not damage oxygen sensors or cause false sensor readings when used on nearby sealing surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the tube of Permatex Ultra Black weigh?\u003c\/strong\u003e The 3 oz tube of Permatex Ultra Black RTV Silicone Gasket Maker, part number 82180, weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Permatex Ultra Black resist oil and other automotive fluids?\u003c\/strong\u003e Yes, this RTV silicone formula offers superior oil resistance and also resists automotive fluids and shop chemicals, which helps it hold up under harsh under-hood conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this sealant hold up to engine vibration?\u003c\/strong\u003e Permatex Ultra Black is formulated to resist vibration, using a patented adhesion system that maintains high flexibility so the seal does not crack or loosen over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Permatex Ultra Black corrosive to engine components?\u003c\/strong\u003e No, part number 82180 uses a non-corrosive formula, making it safe for contact with metal engine surfaces during and after curing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this gasket maker have a strong odor?\u003c\/strong\u003e Permatex Ultra Black is a low-odor formula, which is more comfortable to work with during application compared to stronger-smelling sealants.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size tube does Permatex Ultra Black come in?\u003c\/strong\u003e This product is packaged as a 3 oz tube, listed under Permatex part number 82180.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Permatex Ultra Black meet OE gasket specifications?\u003c\/strong\u003e Yes, the formula in part number 82180 meets OE silicone gasket specs, making it suitable for original-equipment-level sealing performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is Permatex Ultra Black best suited for?\u003c\/strong\u003e It is designed for sealing applications requiring strong adhesion and high performance under exposure to oils and vibration, such as timing covers, transmission pans, and oil pans.\u003c\/p\u003e","brand":"Permatex","offers":[{"title":"Default Title","offer_id":49028203675867,"sku":"PER-82180","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PER-82180__57144.1747363874.500.750.jpg?v=1785165311"},{"product_id":"crc-heavy-duty-silicone-sealant-7-5-oz","title":"CRC Heavy Duty Silicone Sealant, 7.5 oz","description":"\u003cp\u003eCRC Heavy Duty Silicone is a silicone-based sealant packaged in a 7.5 oz size, formulated for durable sealing applications where a heavy duty silicone product is needed. It is offered in a compact, easy-to-store container that fits well in a boat maintenance kit, garage, or workshop alongside other marine care products.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e CRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CRCC05074\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 7.5 oz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Weight:\u003c\/strong\u003e 0.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Silicone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 078254050744\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size does CRC Heavy Duty Silicone come in?\u003c\/strong\u003e CRC Heavy Duty Silicone (part number CRCC05074) is packaged in a 7.5 oz container.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does CRCC05074 weigh?\u003c\/strong\u003e The CRC Heavy Duty Silicone, part number CRCC05074, has a product weight of 0.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is CRC Heavy Duty Silicone made of?\u003c\/strong\u003e It is a silicone-based formula, as reflected in the product name CRC Heavy Duty Silicone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for CRC Heavy Duty Silicone?\u003c\/strong\u003e The UPC for CRC Heavy Duty Silicone, part number CRCC05074, is 078254050744.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs CRC Heavy Duty Silicone a genuine CRC product?\u003c\/strong\u003e Yes, CRC Heavy Duty Silicone (CRCC05074) is a genuine product from the CRC brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat part number should I reference when ordering CRC Heavy Duty Silicone?\u003c\/strong\u003e Reference manufacturer part number CRCC05074 when ordering CRC Heavy Duty Silicone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs CRC Heavy Duty Silicone suitable for storage in a marine toolkit?\u003c\/strong\u003e Its compact 7.5 oz size and 0.7 pound weight make CRC Heavy Duty Silicone (CRCC05074) easy to store alongside other maintenance products in a marine toolkit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes this heavy duty silicone product?\u003c\/strong\u003e This heavy duty silicone product, part number CRCC05074, is made by CRC.\u003c\/p\u003e","brand":"CRC","offers":[{"title":"Default Title","offer_id":49031211450587,"sku":"CRC-05074","price":6.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CRC-05074__12635.1747363846.500.750.jpg?v=1785329061"},{"product_id":"taco-marine-weather-seal-tape-v30-0109b10-1-3-8-inch-x-5-8-inch-x-10-feet-black","title":"Taco Marine Weather Seal Tape V30-0109B10-1, 3\/8 Inch x 5\/8 Inch x 10 Feet, Black","description":"\u003cp\u003eThis weather seal tape from Taco Marine (V30-0109B10-1) is a closed-cell sponge rubber strip designed to seal gaps, absorb shock, and reduce vibration and rattling on boats. It is made from a durable EPDM synthetic rubber compound that offers strong resistance to water absorption, sunlight damage, and extreme temperatures, making it suited to ongoing marine exposure. A heavy-duty self-adhesive backing is built into the tape for straightforward installation without separate fasteners or adhesive.\u003c\/p\u003e\u003cp\u003eThe tape measures 3\/8 inch by 5\/8 inch and comes in a 10 foot length, supplied in black. It is intended for use on livewells, exterior doors, instrument covers, and electronic boxes, where it seals out water and cuts down on rattling between mating surfaces. Taco Marine backs this weather seal tape with a five-year limited warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taco Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e V30-0109B10-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Weather Seal Tape\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e EPDM synthetic rubber, closed-cell sponge density\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3\/8 inch x 5\/8 inch x 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Thickness:\u003c\/strong\u003e 9.53 millimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking:\u003c\/strong\u003e Self-adhesive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Uses:\u003c\/strong\u003e Livewells, exterior doors, instrument covers, electronic boxes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Five-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taco Marine V30-0109B10-1 weather seal tape used for?\u003c\/strong\u003e It seals and cushions gaps on livewells, exterior doors, instrument covers, and electronic boxes, preventing leaks and reducing rattling between mating surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this weather seal tape?\u003c\/strong\u003e Taco Marine V30-0109B10-1 measures 3\/8 inch by 5\/8 inch in cross-section and comes in a 10 foot length, with an item thickness of 9.53 millimeters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the tape made of?\u003c\/strong\u003e It is made of EPDM synthetic rubber in a medium closed-cell sponge density, chosen for resistance to water absorption, sunlight damage, and extreme temperatures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the tape come with adhesive already applied?\u003c\/strong\u003e Yes, V30-0109B10-1 has a heavy-duty self-adhesive backing built in, so it installs directly onto a clean surface without a separate adhesive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this seal tape come in?\u003c\/strong\u003e This Taco Marine weather seal tape is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a roll of this tape weigh?\u003c\/strong\u003e A roll of the Taco Marine V30-0109B10-1 weather seal tape weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this tape hold up in sun and saltwater exposure?\u003c\/strong\u003e Yes, the EPDM rubber compound used in V30-0109B10-1 is formulated to resist water absorption, sunlight damage, and extreme temperatures, which suits it to marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this seal tape reduce rattling on hatches or covers?\u003c\/strong\u003e Yes, it absorbs shock and reduces vibration, which is one of its intended uses on doors, instrument covers, and electronic boxes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a warranty included with this product?\u003c\/strong\u003e Taco Marine backs the V30-0109B10-1 weather seal tape with a five-year limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is one roll of the tape?\u003c\/strong\u003e Each roll of V30-0109B10-1 weather seal tape is 10 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this seal tape only for boats?\u003c\/strong\u003e It is designed for marine applications like livewells and electronic boxes, though its self-adhesive EPDM construction also suits other exterior sealing uses such as doors and covers.\u003c\/p\u003e","brand":"Taco Marine","offers":[{"title":"Default Title","offer_id":49031450689755,"sku":"TAC-V30-0109B10-1","price":27.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71kDpaHGwML.jpg?v=1785214249"},{"product_id":"taco-marine-hatch-tape-1-8-inch-x-3-4-inch-x-8-feet-closed-cell-foam-anti-rattle-seal","title":"TACO Marine Hatch Tape, 1\/8 Inch x 3\/4 Inch x 8 Feet, Closed-Cell Foam Anti-Rattle Seal","description":"\u003cp\u003eThis TACO Marine Hatch Tape is a closed-cell foam sealing tape sized 1\/8 inch thick by 3\/4 inch wide by 8 feet long, designed to cushion and quiet boat hatches, doors, lockers, and other fiberglass or metal panels that rattle or need a weather seal. The foam construction compresses to fill gaps between mating surfaces, providing an anti-rattle cushion while also helping block wind, spray, and moisture from working through hatch and locker seams. Because it is self-adhesive, it installs directly onto clean, dry marine surfaces such as fiberglass, painted surfaces, and metal without additional fasteners or adhesive products, making it a straightforward repair or upgrade for hatch lids, storage compartments, access panels, and other closures where a tight, quiet fit is wanted.\u003c\/p\u003e\u003cp\u003eThe tape is supplied in a continuous 8 foot length at 1\/8 inch thickness and 3\/4 inch width, allowing it to be cut to fit the exact perimeter of a hatch opening or trimmed for shorter runs on smaller compartments. Its foam composition is intended for ongoing outdoor and marine use, standing up to the surface exposure that hatches and lockers see on a boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e TACO Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e V30-0744B8-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hatch Tape\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Hatches \u0026amp; Adjusters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Closed-cell foam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Self-adhesive backing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 630838020378\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the TACO Marine V30-0744B8-2 hatch tape?\u003c\/strong\u003e The V30-0744B8-2 hatch tape measures 1\/8 inch thick, 3\/4 inch wide, and comes in an 8 foot length that can be trimmed to fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hatch tape self-adhesive?\u003c\/strong\u003e Yes, the V30-0744B8-2 tape has a self-adhesive backing so it can be applied directly to a clean, dry surface without separate glue or fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hatch tape made of?\u003c\/strong\u003e It is made of closed-cell foam, a material that compresses to seal gaps while resisting water absorption.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces can this tape be applied to?\u003c\/strong\u003e The TACO Marine V30-0744B8-2 tape is intended for marine surfaces including fiberglass, painted surfaces, and metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this hatch tape used for?\u003c\/strong\u003e It is used to cushion and seal hatches, lockers, doors, and access panels on a boat, reducing rattling and helping block wind and spray at the seam.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the V30-0744B8-2 hatch tape weigh?\u003c\/strong\u003e This roll of hatch tape weighs 0.09 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the tape be cut to a shorter length?\u003c\/strong\u003e Yes, since the V30-0744B8-2 comes as an 8 foot length, it can be cut down to fit smaller hatch or locker openings as needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this tape come in a roll or precut pieces?\u003c\/strong\u003e The V30-0744B8-2 is supplied as a single continuous 8 foot length rather than precut pieces, so the installer cuts it to the needed run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this tape stop a hatch from rattling?\u003c\/strong\u003e Yes, the closed-cell foam construction of the V30-0744B8-2 is designed to cushion contact points and reduce rattling between a hatch and its frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this tape only for boats?\u003c\/strong\u003e The V30-0744B8-2 is built for marine surface use, though its foam and adhesive construction suit any application needing a thin cushioning and sealing strip on similar rigid surfaces.\u003c\/p\u003e","brand":"Taco Marine","offers":[{"title":"Default Title","offer_id":49031450722523,"sku":"TAC-V30-0744B8-2","price":15.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71H8I7GbiUL.jpg?v=1785214249"},{"product_id":"taco-marine-hatch-tape-v30-0748b8-2-1-4-x-3-4-inch-x-8-feet-black-closed-cell-foam-seal","title":"TACO Marine Hatch Tape V30-0748B8-2, 1\/4 x 3\/4 Inch x 8 Feet, Black Closed-Cell Foam Seal","description":"\u003cp\u003eThis hatch tape from TACO Marine is a self-adhesive, closed-cell foam gasket tape designed to seal boat hatches and prevent rattling while the boat is underway. Made from medium density closed-cell foam, it compresses to form a snug, water-resistant seal between a hatch and its frame, keeping out spray and cushioning the hatch against vibration and impact noise. The tape measures 1\/4 inch thick by 3\/4 inch wide and comes in an 8 foot length, giving enough material to seal a standard hatch opening in a single piece or to be cut down for smaller applications. It is finished in black to blend in with most hatch and deck hardware. Installation is straightforward: clean and dry the mounting surface, then peel the backing and press the tape into place along the hatch lip or frame, with no additional adhesives or tools required. The closed-cell structure resists water absorption, so the foam will not become waterlogged or lose its sealing properties over repeated exposure to marine conditions. TACO Marine backs this hatch tape with a five-year limited warranty. It is a simple, low-cost way to quiet a loose-fitting hatch and add a layer of weather resistance to hatch openings, storage compartments, and access ports on boats and other outdoor equipment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e TACO Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e V30-0748B8-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Hatch Tape\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Closed-cell foam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e Medium density\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive:\u003c\/strong\u003e Self-adhesive backing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Five-year limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the TACO Marine V30-0748B8-2 hatch tape?\u003c\/strong\u003e The V30-0748B8-2 hatch tape measures 1\/4 inch thick by 3\/4 inch wide and comes in an 8 foot length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hatch tape self-adhesive?\u003c\/strong\u003e Yes, the TACO Marine hatch tape has a self-adhesive backing, so it presses directly onto a clean, dry surface without extra glue or tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hatch tape made of?\u003c\/strong\u003e It is made from medium density, closed-cell foam, which resists water absorption and holds its shape under compression.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this tape come in?\u003c\/strong\u003e The V30-0748B8-2 hatch tape is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this tape used for?\u003c\/strong\u003e It is used to seal boat hatches and provide an anti-rattle cushion between a hatch and its frame, reducing noise and blocking spray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the hatch tape weigh?\u003c\/strong\u003e The TACO Marine hatch tape weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the tape water resistant?\u003c\/strong\u003e Yes, the closed-cell foam construction of the V30-0748B8-2 tape is water resistant, so it will not become waterlogged during normal marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes TACO Marine offer a warranty on this tape?\u003c\/strong\u003e The hatch tape is covered by a five-year limited warranty from TACO Marine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this tape be cut to a custom length?\u003c\/strong\u003e The tape ships in a single 8 foot length, which can be cut down as needed to fit smaller hatch openings or gaps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces can this tape be applied to?\u003c\/strong\u003e The V30-0748B8-2 hatch tape is suited for marine surfaces such as metal, fiberglass, and painted surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any tools to install this hatch tape?\u003c\/strong\u003e No tools are required; simply clean the surface, peel the adhesive backing, and press the TACO Marine tape into place.\u003c\/p\u003e","brand":"Taco Marine","offers":[{"title":"Default Title","offer_id":49031450755291,"sku":"TAC-V30-0748B8-2","price":18.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71H8I7GbiUL_34a5a40b-6705-4ad9-a630-5b7d59683e37.jpg?v=1785214249"},{"product_id":"taco-marine-flex-trim-black-vinyl-9-16-inch-x-25-feet-with-5-32-inch-opening-v30-1005b25-1","title":"TACO Marine Flex Trim, Black Vinyl, 9\/16 Inch x 25 Feet with 5\/32 Inch Opening, V30-1005B25-1","description":"\u003cp\u003eThis TACO Marine Flex Trim is a black, flexible vinyl insert trim designed to finish and protect exposed edges on boats and marine hardware. Supplied in a 25 foot length, it measures 9\/16 inch wide with a 5\/32 inch opening that slides over an edge or flange to create a clean, finished look while guarding against sharp edges, vibration, and minor impact. The PVC construction is flexible enough to follow curved gunwales, hull edges, and hardware lines without cracking, making it a practical option for boat builders, canvas and upholstery shops, and DIY boat owners doing edge finishing or trim replacement.\u003c\/p\u003e\u003cp\u003eBecause it is sold by the foot in a continuous 25 foot roll, it can be cut to length as needed for a single job or multiple smaller trim runs, and matched to other black PVC trim on the boat for a consistent appearance. Its solid black finish resists fading and holds up to regular exposure to water and weather, making it suited to both fresh and saltwater environments.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e TACO Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e V30-1005B25-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyvinyl Chloride (PVC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Width:\u003c\/strong\u003e 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Length:\u003c\/strong\u003e 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening Size:\u003c\/strong\u003e 5\/32 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePattern:\u003c\/strong\u003e Solid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the TACO Marine V30-1005B25-1 flex trim?\u003c\/strong\u003e The V30-1005B25-1 flex trim measures 9\/16 inch wide with a 5\/32 inch opening, and comes in a 25 foot length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this trim made from?\u003c\/strong\u003e It is made from black polyvinyl chloride (PVC), a flexible material that allows the trim to follow curved edges without cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is one roll of the V30-1005B25-1 trim?\u003c\/strong\u003e Each roll is 25 feet long, allowing it to be cut to length for one job or split across several smaller trim runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options are available for this flex trim?\u003c\/strong\u003e The V30-1005B25-1 is sold in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the opening size for, on this trim?\u003c\/strong\u003e The 5\/32 inch opening on the V30-1005B25-1 flex trim is the channel that slides over an edge or flange to hold the trim in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this trim flexible enough for curved edges?\u003c\/strong\u003e Yes, the PVC construction of the TACO Marine flex trim is designed to bend around curved gunwales, hull edges, and hardware lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the TACO Marine flex trim water resistant?\u003c\/strong\u003e Yes, the V30-1005B25-1 is water resistant, making it suitable for use in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this trim weigh?\u003c\/strong\u003e A 25 foot roll of the V30-1005B25-1 flex trim weighs 1.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this trim be cut to a shorter length?\u003c\/strong\u003e Yes, since the V30-1005B25-1 is supplied as a continuous 25 foot length, it can be trimmed to whatever shorter length a specific job requires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pattern or finish of this trim?\u003c\/strong\u003e The V30-1005B25-1 has a solid black finish with no printed pattern.\u003c\/p\u003e","brand":"Taco Marine","offers":[{"title":"Default Title","offer_id":49031451017435,"sku":"TAC-V30-1005B25-1","price":71.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61i2TSMo7BL.jpg?v=1785214250"},{"product_id":"taco-marine-flex-trim-insert-v30-1008b25-1-1-2-inch-x-25-feet-1-4-inch-opening-black-pvc","title":"Taco Marine Flex Trim Insert V30-1008B25-1, 1\/2 Inch x 25 Feet, 1\/4 Inch Opening, Black PVC","description":"\u003cp\u003eThe Taco Marine Flex Trim Insert (V30-1008B25-1) is a 25 foot length of black PVC trim insert designed to fit into rub rail or trim molding channels with a 1\/4 inch opening. Made from Polyvinyl Chloride (PVC), the insert measures 1\/2 inch wide and 0.5 inches thick, giving it enough flexibility to follow the curves of a boat's hull, gunwale, or trim channel while staying securely seated in the opening. Because it comes as a continuous 25 foot roll rather than pre-cut lengths, it can be trimmed to the exact size needed for a single repair or run the full length of a rail. It is finished in black to match common rub rail and trim molding colors, making it useful for replacing worn, faded, or cracked insert strips without changing the look of the original hardware. The flexible PVC construction is intended to withstand the flexing and vibration that occur when a boat is underway, and its 1\/4 inch profile is sized to snap or slide into standard trim channels of that opening dimension.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taco Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e V30-1008B25-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyvinyl Chloride (PVC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Thickness:\u003c\/strong\u003e 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 8 inches L x 8 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 630838005740\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taco Marine V30-1008B25-1 flex trim insert used for?\u003c\/strong\u003e It is a black PVC insert strip made to fit into rub rail or trim molding channels that have a 1\/4 inch opening, used to fill, finish, or replace the insert portion of the trim on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the V30-1008B25-1 flex trim?\u003c\/strong\u003e It comes as a continuous 25 foot roll, 1\/2 inch wide, that can be cut to the length needed for the job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat opening size does this trim insert fit?\u003c\/strong\u003e The V30-1008B25-1 is sized for a 1\/4 inch opening in the trim or rub rail channel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Taco Marine flex trim made from?\u003c\/strong\u003e It is made of Polyvinyl Chloride (PVC), a flexible plastic that allows the insert to follow curved rail and trim sections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick is this flex trim insert?\u003c\/strong\u003e The V30-1008B25-1 has an item thickness of 0.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the V30-1008B25-1 trim insert?\u003c\/strong\u003e It is black, a common color used to match standard rub rail and trim molding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the V30-1008B25-1 flex trim weigh?\u003c\/strong\u003e This 25 foot roll weighs 1.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this flex trim be cut to length?\u003c\/strong\u003e Yes, the Taco Marine V30-1008B25-1 is supplied as a 25 foot roll so it can be cut down to fit shorter sections of rail or trim molding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the V30-1008B25-1 sold as a single roll?\u003c\/strong\u003e Yes, it is sold as one 25 foot roll of black PVC flex trim insert.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this insert flex around curved rub rails?\u003c\/strong\u003e The PVC construction of the V30-1008B25-1 is designed to be flexible so it can be worked around curves in rub rail and trim molding channels.\u003c\/p\u003e","brand":"Taco Marine","offers":[{"title":"Default Title","offer_id":49031451115739,"sku":"TAC-V30-1008B25-1","price":71.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71m4u9My-iL.jpg?v=1785214251"},{"product_id":"taco-marine-flex-trim-v30-1312b25-1-5-8-inch-x-25-feet-black-pvc-trim-with-3-8-inch-opening","title":"TACO Marine Flex Trim V30-1312B25-1, 5\/8 Inch x 25 Feet, Black PVC Trim with 3\/8 Inch Opening","description":"\u003cp\u003eTACO Marine Flex Trim (V30-1312B25-1) is a flexible black PVC trim molding designed to finish and protect edges on boats and similar applications. Supplied in a 25 foot length at 5\/8 inch wide, it features a 3\/8 inch opening that snaps over an edge to cover raw or cut material, guard against sharp corners, and give a clean, finished look. The PVC construction is lightweight and flexible, allowing it to bend around curves and contours rather than requiring rigid, pre-formed pieces for every angle. A pull-on closure lets the trim be pressed into place by hand along the edge it is covering, with a snap-style opening mechanism that grips and holds once installed. The solid black color and modern style profile blend in with most boat surfaces without drawing attention to the trim itself, and the material is rated water resistant, making it suitable for exposure to marine environments including spray and rain. Because it ships as a continuous 25 foot roll, it can be cut to length as needed for a single project or used across multiple edges, reducing waste compared to fixed-length pieces. This trim is commonly used on boats for edging on hatches, panels, screens, and other cut-edge surfaces where a finished, protective border is wanted.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e TACO Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e V30-1312B25-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyvinyl Chloride (PVC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening Size:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Modern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePattern:\u003c\/strong\u003e Solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Pull-On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening Mechanism:\u003c\/strong\u003e Snap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 630838008154\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the TACO Marine V30-1312B25-1 flex trim?\u003c\/strong\u003e It measures 5\/8 inch wide with a 3\/8 inch opening and comes in a 25 foot length, giving enough material to trim multiple edges or one long run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this trim made from?\u003c\/strong\u003e The V30-1312B25-1 trim is made from polyvinyl chloride (PVC), a flexible plastic that allows the strip to bend around curves and corners rather than cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this trim water resistant?\u003c\/strong\u003e Yes, the black PVC construction of the V30-1312B25-1 flex trim is rated water resistant, which suits it to marine and outdoor exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the trim attach to an edge?\u003c\/strong\u003e It uses a pull-on, snap-style opening that is pressed by hand over the edge of the panel or material being covered, gripping it in place without additional hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this trim come in?\u003c\/strong\u003e The V30-1312B25-1 is a solid black trim with a modern style profile.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 25 foot roll weigh?\u003c\/strong\u003e The TACO Marine flex trim weighs 2.3 pounds for the full 25 foot length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this trim be cut to shorter lengths?\u003c\/strong\u003e Yes, since it ships as a continuous 25 foot roll of V30-1312B25-1 trim, it can be cut down to whatever length a specific edge requires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the opening size used for?\u003c\/strong\u003e The 3\/8 inch opening on the V30-1312B25-1 trim is the channel that snaps over the edge material, so it should match the thickness of the panel or edge being covered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this trim only for boats?\u003c\/strong\u003e The V30-1312B25-1 is a general-purpose PVC edge trim marketed for marine use, though its snap-on PVC design also suits other panel-edging applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the trim come pre-formed to a shape?\u003c\/strong\u003e No, the V30-1312B25-1 is a flexible straight roll rather than a pre-formed piece, so it is shaped by hand as it is installed along an edge.\u003c\/p\u003e","brand":"Taco Marine","offers":[{"title":"Default Title","offer_id":49031451181275,"sku":"TAC-V30-1312B25-1","price":80.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71m4u9My-iL_6f5dae4f-f96c-43da-976f-1252b13af302.jpg?v=1785214251"},{"product_id":"boatlife-life-calk-polysulfide-sealant-tube-non-shrinking-marine-sealant-available-in-black-and-white","title":"BoatLIFE Life-Calk Polysulfide Sealant Tube - Non-Shrinking Marine Sealant, Available in Black and White","description":"\u003cp\u003eBoatLIFE Life-Calk is a one-part polysulfide sealant built for the seams, joints, and hardware on your boat that need a flexible, long-lasting bond below and above the waterline. Formulated to stay non-shrinking as it cures, Life-Calk keeps a tight, consistent seal instead of pulling away from the joint over time, and it stands up to constant flexing, vibration, and water exposure without cracking or losing adhesion. It bonds well to fiberglass, glass, metal, plastic, rubber, and wood, making it a go-to choice for bedding deck hardware, sealing hull-to-deck joints, caulking teak decks, and general below-deck sealing tasks where a rigid or fast-curing sealant would fail.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: BoatLIFE\u003c\/li\u003e\n\u003cli\u003eMaterial: Polysulfide\u003c\/li\u003e\n\u003cli\u003eCure Characteristic: Non-Shrinking\u003c\/li\u003e\n\u003cli\u003eWater Resistance: Water Resistant once cured\u003c\/li\u003e\n\u003cli\u003eCompatible Surfaces: Fiberglass, Glass, Metal, Plastic, Rubber, Wood\u003c\/li\u003e\n\u003cli\u003eItem Form: Liquid (tube)\u003c\/li\u003e\n\u003cli\u003eUnit Count: 1 tube per package\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eLife-Calk is offered in two tube sizes and colors to match your job and the amount of coverage you need. The 2.8 fl oz tube in black is sized for larger sealing and bedding jobs where more material is needed, while the 1 fl oz tube in white suits smaller touch-up or trim work where a lighter, less noticeable seam is preferred. Choose your color based on the surrounding surface color and your volume based on the length and depth of the joint you are sealing.\u003c\/p\u003e","brand":"Boat Life","offers":[{"title":"Black (2.8 fl oz)","offer_id":49048033722587,"sku":"BOA-1031","price":15.45,"currency_code":"USD","in_stock":false},{"title":"White (1 fl oz)","offer_id":49048033755355,"sku":"BOA-1305","price":9.57,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51VPyXJy_vL_a2b3119c-362b-40c9-bac6-b1d091840bf2.jpg?v=1785433310"},{"product_id":"boatlife-life-seal-marine-sealant-silicone-polyurethane-adhesive-caulk-available-in-1-oz-to-10-6-oz-clear-white-black","title":"BoatLIFE Life Seal Marine Sealant - Silicone\/Polyurethane Adhesive Caulk, Available in 1 oz to 10.6 oz, Clear\/White\/Black","description":"\u003cp\u003eBoatLIFE Life Seal is a one-part marine sealant that blends silicone and polyurethane into a single hybrid formula, giving it the flexibility of silicone with the adhesive strength of polyurethane. Developed specifically for fiberglass boats, Life Seal bonds tenaciously to metal, glass, wood, Lexan, ABS, and gelcoat, and it keeps its bond even as hull and deck joints flex and move with the water. It cures fast, cures in the presence of moisture, and resists yellowing and sagging over time, making it a dependable choice for both routine maintenance and full rebeds.\u003c\/p\u003e\u003cp\u003eLife Seal is built for the jobs that separate a dry boat from a leaky one: bedding deck hardware, sealing thru-hull fittings, glazing windshields and ports, and sealing deck-to-hull joints both above and below the waterline. Because it stays flexible after cure, it absorbs the vibration and flex that would crack a rigid caulk, so seals stay watertight season after season.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: BoatLIFE\u003c\/li\u003e\n\u003cli\u003eMaterial: Marine silicone and polyurethane hybrid\u003c\/li\u003e\n\u003cli\u003eItem Form: Liquid, one-part sealant\u003c\/li\u003e\n\u003cli\u003eCure Type: Fast-curing, cures in presence of water\u003c\/li\u003e\n\u003cli\u003eApplication: Above and below the waterline\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: United States\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eLife Seal is offered in three package sizes to match the scope of the job, from a 1 oz tube for small touch-ups and trim work, to a 2.8 oz tube for hardware bedding and moderate repairs, up to a 10.6 oz cartridge (fits a standard caulking gun) for full deck seams, thru-hull rebeds, and larger projects. The 10.6 oz cartridge is also available in three colors, Clear, White, and Black, so you can match or blend with your gelcoat, deck, or trim. Choose your size based on the linear feet of joint you need to seal, and choose color to match the surrounding surface for the cleanest finished look.\u003c\/p\u003e","brand":"Boat Life","offers":[{"title":"1 oz Tube \/ Clear","offer_id":49049049923803,"sku":"BOA-1109","price":9.56,"currency_code":"USD","in_stock":true},{"title":"2.8 oz Tube \/ Clear","offer_id":49049049956571,"sku":"BOA-1160","price":13.45,"currency_code":"USD","in_stock":true},{"title":"10.6 oz Cartridge \/ Clear","offer_id":49049049989339,"sku":"BOA-1169","price":25.06,"currency_code":"USD","in_stock":false},{"title":"10.6 oz Cartridge \/ White","offer_id":49049050022107,"sku":"BOA-1170","price":25.06,"currency_code":"USD","in_stock":true},{"title":"10.6 oz Cartridge \/ Black","offer_id":49049050054875,"sku":"BOA-1171","price":25.06,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61tslwYzGVL_af33e81c-cde6-4c57-8f2b-e64d7fc0fcd8.jpg?v=1785450208"},{"product_id":"boat-life-life-calk-polysulfide-marine-sealant-tubes-cartridges-2-8-oz-to-10-6-oz-white-black","title":"Boat Life Life-Calk Polysulfide Marine Sealant - Tubes \u0026 Cartridges, 2.8 oz to 10.6 oz, White \u0026 Black","description":"\u003cp\u003eBoat Life Life-Calk is a one-part polysulfide sealant built for the demands of the marine environment, above and below the waterline. It stays flexible after cure, bonds tenaciously to fiberglass, wood, metal, and glass, and stands up to years of flexing, UV exposure, and saltwater immersion without cracking or losing adhesion. Whether you are bedding deck hardware, sealing a thru-hull, glazing a port light, or re-caulking a teak deck seam, Life-Calk forms a long-lasting, watertight bond that can be sanded and painted once fully cured.\u003c\/p\u003e\u003cp\u003eThis line is offered in the tube and cartridge sizes boat owners actually need for jobs ranging from small hardware installs to full deck seam work, in the classic white and black colors used across most marine applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Polysulfide, one-part liquid sealant\u003c\/li\u003e\n\u003cli\u003eColors: White, Black\u003c\/li\u003e\n\u003cli\u003ePackage formats: 2.8 oz tube, 5.2 oz cartridge, 10.6 oz cartridge\u003c\/li\u003e\n\u003cli\u003eCompatible surfaces: Fiberglass, glass, metal, wood\u003c\/li\u003e\n\u003cli\u003eWater resistance: Water resistant, suitable above and below the waterline\u003c\/li\u003e\n\u003cli\u003eCured sealant can be sanded and painted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eChoose the 2.8 oz tube (BOA-1030) for small jobs like a single fitting, hinge, or fastener. The 5.2 oz cartridge (BOA-1372) suits medium jobs such as a port light or small hardware run and fits standard caulk guns. For larger projects like deck seams, hull-to-deck joints, or multiple thru-hulls, step up to the black 10.6 oz cartridge (BOA-1034) or the black cartridge option (BOA-1033) for maximum coverage per application. Match color to your existing hardware or hull finish: white for most fiberglass and gelcoat work, black for teak seams and darker trim.\u003c\/p\u003e","brand":"Boat Life","offers":[{"title":"2.8 oz Tube \/ White","offer_id":49049052643547,"sku":"BOA-1030","price":15.45,"currency_code":"USD","in_stock":true},{"title":"Cartridge \/ Black","offer_id":49049052676315,"sku":"BOA-1033","price":29.37,"currency_code":"USD","in_stock":true},{"title":"10.6 oz Cartridge \/ Black","offer_id":49049052709083,"sku":"BOA-1034","price":28.23,"currency_code":"USD","in_stock":false},{"title":"5.2 oz Cartridge \/ White","offer_id":49049052741851,"sku":"BOA-1372","price":17.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51LrggcJF9L_23f42388-1a8d-4230-9a6d-75850feeeebe.jpg?v=1785450265"},{"product_id":"boatlife-silicone-rubber-sealant-marine-grade-clear-white-1-oz-to-10-6-oz-cartridge","title":"BoatLIFE Silicone Rubber Sealant - Marine Grade, Clear \u0026 White, 1 Oz to 10.6 Oz Cartridge","description":"\u003cp\u003eBoatLIFE Silicone Rubber Sealant is a marine-grade, 100% silicone adhesive-sealant built for the demanding conditions of life on the water. It bonds tenaciously to fiberglass, plastic, metal, and wood, and it holds that bond both above and below the waterline. Whether you are re-bedding a hardware fitting, sealing a hatch, or closing up a small hull penetration, this sealant cures to a flexible, non-yellowing, waterproof seal that resists the flexing, vibration, and constant moisture exposure that break down ordinary caulks and adhesives. It will not corrode metal fittings, making it safe to use on stainless, aluminum, and chromed hardware throughout the boat.\u003c\/p\u003e\u003cp\u003eThe line is offered in clear and white colors and in three package sizes, from a compact 1 ounce tube for small touch-up jobs up to a 10.6 ounce cartridge for larger re-bedding and sealing projects run through a standard caulking gun.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: BoatLIFE\u003c\/li\u003e\n\u003cli\u003eMaterial: 100% silicone rubber\u003c\/li\u003e\n\u003cli\u003eColors: Clear, White\u003c\/li\u003e\n\u003cli\u003eContainer types: Tube (1 oz and 2.8 oz), Cartridge (10.6 oz)\u003c\/li\u003e\n\u003cli\u003eTack-free time: 30 minutes or less\u003c\/li\u003e\n\u003cli\u003eFull cure time: 24 hours\u003c\/li\u003e\n\u003cli\u003eWater resistance: Waterproof, rated for above or below the waterline use\u003c\/li\u003e\n\u003cli\u003eCompatible materials: Fiberglass, plastic, metal, wood\u003c\/li\u003e\n\u003cli\u003eNon-corrosive to metal fittings\u003c\/li\u003e\n\u003cli\u003eNon-yellowing, flexible cured finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003ePick your package size based on the scope of the job: the 1 ounce tube suits small repairs, touch-ups, and spot-sealing a single fitting. The 2.8 ounce tube covers medium jobs like bedding a cleat or sealing a hatch frame without opening a larger container. The 10.6 ounce cartridge is sized for a standard caulking gun and is the most economical choice for re-bedding hardware runs, larger hull penetrations, or any project that will use up more than a couple of ounces of sealant. Choose clear when the sealant will be visible and you want it to disappear into the joint, or white to match light-colored gelcoat, fiberglass, or trim.\u003c\/p\u003e","brand":"Boat Life","offers":[{"title":"1 oz Tube \/ Clear","offer_id":49049052840155,"sku":"BOA-1110","price":9.2,"currency_code":"USD","in_stock":false},{"title":"2.8 oz Tube \/ Clear","offer_id":49049052872923,"sku":"BOA-1140","price":10.45,"currency_code":"USD","in_stock":false},{"title":"2.8 oz Tube \/ White","offer_id":49049052905691,"sku":"BOA-1141","price":10.45,"currency_code":"USD","in_stock":false},{"title":"10.6 oz Cartridge \/ Clear","offer_id":49049052938459,"sku":"BOA-1150","price":20.77,"currency_code":"USD","in_stock":true},{"title":"10.6 oz Cartridge \/ White","offer_id":49049052971227,"sku":"BOA-1151","price":20.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41MuC8vI_sL_f539c239-3361-4880-b8ef-7a3f790dd723.jpg?v=1785450321"},{"product_id":"boatlife-release-sealant-adhesive-remover-available-in-1-fl-oz-spray-and-16-oz","title":"BoatLIFE Release Sealant \u0026 Adhesive Remover - Available in 1 fl oz Spray and 16 oz","description":"\u003cp\u003eBoatLIFE Release is a solvent-based sealant and adhesive remover made to break down cured caulk, sealant, and adhesive residue on fiberglass, wood, metal, and glass surfaces. Used together with a scraping tool, Release softens stubborn material so it lifts away cleanly instead of tearing or gouging the substrate underneath. It also cuts through leftover decal, tape, and label adhesive, making it a handy general cleanup solvent to keep aboard during any resealing or refit project. The line is offered in a 16 oz container for larger jobs and a 1 fl oz spray bottle sized for touch-up work, small repairs, or carrying in a tool bag.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: BoatLIFE\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Numbers: 1288, 1291\u003c\/li\u003e\n\u003cli\u003eRemoves cured sealant, caulk, and adhesive residue\u003c\/li\u003e\n\u003cli\u003eSafe on most carpeted, vinyl, plastic, and painted surfaces\u003c\/li\u003e\n\u003cli\u003eUse with a scraping tool for best results\u003c\/li\u003e\n\u003cli\u003eAvailable in 16 oz container and 1 fl oz spray bottle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eChoose the 16 oz container for full resealing jobs, hull seam removal, or whenever you are stripping sealant across a larger area. Choose the 1 fl oz spray bottle for spot touch-ups, small hardware removal, decal residue cleanup, or as a compact option to keep in a toolbox or ditch bag. Both sizes use the same Release formula, so the choice comes down to job size and how much product you expect to use.\u003c\/p\u003e","brand":"Boat Life","offers":[{"title":"16 oz","offer_id":49049053298907,"sku":"BOA-1288","price":47.7,"currency_code":"USD","in_stock":false},{"title":"1 fl oz Spray","offer_id":49049053331675,"sku":"BOA-1291","price":12.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51pumyruIkL_5737acbc-9aa1-498f-935d-5d1a3d748fb5.jpg?v=1785450364"},{"product_id":"3m-marine-adhesive-sealant-5200-permanent-polyurethane-boat-sealant-available-in-3-fl-oz-to-10-fl-oz-black-or-white","title":"3M Marine Adhesive Sealant 5200 - Permanent Polyurethane Boat Sealant, Available in 3 fl oz to 10 fl oz, Black or White","description":"\u003cp\u003e3M Marine Adhesive Sealant 5200 is the industry-standard permanent polyurethane adhesive sealant for bonding and sealing above and below the waterline. Formulated to create a rock-solid, flexible bond between fiberglass, wood, and metal, 5200 is the go-to choice for deck-to-hull joints, hardware and fitting installation, hull seams, portholes, and transom-mounted hardware on boats and RVs. Once cured, the elastomeric bond resists vibration, shock, and the constant expansion and contraction of a marine environment, while standing up to saltwater, fuel, and weathering for the life of the vessel.\u003c\/p\u003e\u003cp\u003eThis line is offered in two cartridge sizes to match jobs of any scale, from small hardware repairs to full hull-seam applications, and in Black or White to blend with common deck and hull finishes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: 3M\u003c\/li\u003e\n\u003cli\u003eModel: 5200\u003c\/li\u003e\n\u003cli\u003eItem Form: Paste\u003c\/li\u003e\n\u003cli\u003eCompatible Material: Fiberglass, Metal, Wood\u003c\/li\u003e\n\u003cli\u003eWater Resistance Level: Waterproof, rated above and below the waterline\u003c\/li\u003e\n\u003cli\u003eCure Time: Tack-free in 1 to 2 hours, fully cures within 48 hours\u003c\/li\u003e\n\u003cli\u003eBond Type: Permanent, flexible elastomeric\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eChoose the 3 fl oz tube for small repairs, single fittings, or touch-up work where precision and minimal waste matter. Choose the 10 fl oz cartridge (used with a standard caulking gun) for larger jobs such as deck-to-hull seams, transom mounting, or multiple hardware installs. Match the color to your existing gelcoat or hardware finish: Black for dark hulls, trim, and hardware; White for light-colored decks and hulls where the cured sealant should blend in rather than stand out.\u003c\/p\u003e","brand":"3M","offers":[{"title":"10 fl oz Cartridge \/ Black","offer_id":49049142984923,"sku":"3-M-06504","price":39.02,"currency_code":"USD","in_stock":true},{"title":"10 fl oz Cartridge \/ White","offer_id":49049143017691,"sku":"3-M-06500","price":43.67,"currency_code":"USD","in_stock":true},{"title":"3 fl oz Tube \/ Black","offer_id":49049143050459,"sku":"3-M-05205","price":26.23,"currency_code":"USD","in_stock":false},{"title":"3 fl oz Tube \/ White","offer_id":49049143083227,"sku":"3-M-05203","price":26.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71-OC23UzkL_952a2a80-e60d-4440-b3a3-4ce4a63f5328.jpg?v=1785451431"},{"product_id":"3m-marine-adhesive-sealant-5200-fast-cure-white-available-in-3-oz-tube-to-10-fl-oz-cartridge","title":"3M Marine Adhesive Sealant 5200 Fast Cure, White - Available in 3 oz Tube to 10 fl oz Cartridge","description":"\u003cp\u003e3M Marine Adhesive Sealant 5200 Fast Cure is a permanent, high-strength polyurethane adhesive sealant engineered for below- and above-waterline marine bonding and sealing. It creates a durable, flexible, watertight bond between wood, fiberglass, gelcoat, plastics, and metal, making it the go-to choice for deck-to-hull seams, through-hull fittings, portholes, deck hardware, and engine mounting on fiberglass transoms. The Fast Cure formula reaches a tack-free skin in 1 to 2 hours and full cure in 48 hours, letting builders and installers move faster than with standard-cure 5200 while retaining the same legendary holding power and long-term water resistance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: 3M\u003c\/li\u003e\n\u003cli\u003eFormula: 5200FC Fast Cure Polyurethane\u003c\/li\u003e\n\u003cli\u003eColor: White\u003c\/li\u003e\n\u003cli\u003eItem Form: Liquid\u003c\/li\u003e\n\u003cli\u003eTack-Free Time: 1 to 2 hours\u003c\/li\u003e\n\u003cli\u003eFull Cure Time: 48 hours\u003c\/li\u003e\n\u003cli\u003eWater Resistance: Above and below the waterline\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 600 psi (cured)\u003c\/li\u003e\n\u003cli\u003eViscosity: High\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis 5200 Fast Cure line is available in two package sizes to match the scope of your project. The 3 oz tube is sized for small repairs, touch-ups, and hardware installs where a caulking gun isn't practical. The 10 fl oz cartridge is built for larger jobs like deck seams, hull fittings, and multi-point installs, and loads directly into a standard caulking gun for controlled, continuous beads. Choose the tube for spot work and the cartridge for anything requiring sustained application.\u003c\/p\u003e","brand":"3M","offers":[{"title":"10 fl oz Cartridge","offer_id":49049143378139,"sku":"3-M-06520","price":47.44,"currency_code":"USD","in_stock":true},{"title":"3 oz Tube","offer_id":49049143410907,"sku":"3-M-05220","price":31.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71U-jH9UfVL_4c94f91c-dd0e-4961-81b6-9514f60bca40.jpg?v=1785451480"},{"product_id":"3m-marine-grade-silicone-sealant-clear-available-in-3-fl-oz-tube-and-10-3-fl-oz-cartridge","title":"3M Marine Grade Silicone Sealant, Clear - Available in 3 fl oz Tube and 10.3 fl oz Cartridge","description":"\u003cp\u003e3M Marine Grade Silicone Sealant is a moisture-curing, clear silicone sealant engineered for above-the-waterline sealing on interior and exterior boat surfaces. It bonds to bare and painted metal, fiberglass, glass, non-oily woods, many plastics, and abraded rubber, forming a flexible, water-resistant seal that resists yellowing and sagging even after years of sun and spray exposure. Use it to seal hardware, fittings, windows, hatches, trim, and other above-waterline joints where a clean, durable, paintable-clear finish is required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: 3M\u003c\/li\u003e\n\u003cli\u003eColor: Clear\u003c\/li\u003e\n\u003cli\u003eItem Form: Liquid\u003c\/li\u003e\n\u003cli\u003eCure Type: Moisture-curing\u003c\/li\u003e\n\u003cli\u003eCompatible Materials: Bare and painted metal, fiberglass, glass, non-oily woods, many plastics, abraded rubid rubber\u003c\/li\u003e\n\u003cli\u003eWater Resistance Level: Water Resistant\u003c\/li\u003e\n\u003cli\u003eMaterial: Specialized silicone or synthetic rubber compound\u003c\/li\u003e\n\u003cli\u003eIntended Use: Industrial\/occupational use only, not for consumer sale or use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis sealant is available in two package sizes to match the scope of your job. Choose the \u003cstrong\u003e3 fl oz Tube\u003c\/strong\u003e for small repairs, spot sealing, and touch-up work where a full cartridge would go to waste. Choose the \u003cstrong\u003e10.3 fl oz Cartridge\u003c\/strong\u003e for larger projects such as re-bedding hardware, sealing windows and hatches, or general above-waterline sealing runs, since it fits a standard caulking gun for controlled, continuous application. Both sizes use the same clear, moisture-curing formula, so pick based on the volume of sealant your project requires.\u003c\/p\u003e","brand":"3M","offers":[{"title":"10.3 fl oz Cartridge","offer_id":49049144590555,"sku":"3-M-08029","price":47.07,"currency_code":"USD","in_stock":false},{"title":"3 fl oz Tube","offer_id":49049144623323,"sku":"3-M-08019","price":29.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61S8tSufMYL_04358976-5450-4273-b23e-165090ccbed5.jpg?v=1785451523"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/CRC-05074__12635.1747363846.500.750.jpg?v=1785356480","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-maintenance-cleaning-paint-sealants-adhesives.oembed?page=2","provider":"Good Vibes Marina","version":"1.0","type":"link"}