{"title":"Topside Paint, Primers \u0026 Varnish","description":null,"products":[{"product_id":"moeller-025479-omc-charcoal-metallic-engine-spray-paint-12-oz-aerosol-acrylic-lacquer","title":"Moeller 025479 EP OMC Charcoal Metallic Engine Paint, 12 oz Aerosol","description":"\u003cp\u003eMoeller 025479 is a charcoal metallic acrylic lacquer engine paint packaged as a 12 fluid ounce aerosol can. It is formulated for use on all outboard and inboard engines, stern drives, and lower units, making it a straightforward choice for touching up or refinishing engine housings and drive components in a factory-style charcoal metallic finish. The acrylic lacquer formula is designed for extended staying power in a marine environment, holding up to the outdoor exposure that engine and drive components typically face. The can uses a big-button spray head that delivers a wide fan spray pattern, letting you cover larger surfaces evenly without the streaking or blotching that comes from a narrow, inconsistent spray. The paint is intended for application to plastic surfaces and dries to a metallic finish that matches the charcoal metallic color used on OMC outboard and stern drive engines. Because it comes in a standard aerosol can, no separate spray equipment is needed; the paint is ready to use straight from the can for spot touch-ups, full component refinishing, or general engine cosmetic maintenance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025479\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Charcoal Metallic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Type:\u003c\/strong\u003e Metallic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Volume:\u003c\/strong\u003e 12 Fluid Ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Aerosol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e Acrylic Lacquer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Uses For Product:\u003c\/strong\u003e Engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Recommendation:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor\/Outdoor Usage:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance Level:\u003c\/strong\u003e Water Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729254790\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Moeller 025479 used for?\u003c\/strong\u003e Moeller 025479 is a charcoal metallic acrylic lacquer spray paint made for use on all outboard and inboard engines, stern drives, and lower units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does this paint produce?\u003c\/strong\u003e It sprays a charcoal metallic finish, matching the metallic charcoal color commonly used on OMC outboard and stern drive engine housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much paint is in one can of Moeller 025479?\u003c\/strong\u003e Each can holds 12 fluid ounces of acrylic lacquer paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint be used on plastic engine covers?\u003c\/strong\u003e Yes, Moeller 025479 is formulated for application on plastic surfaces, which makes it suitable for plastic engine housings and covers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Moeller 025479 waterproof?\u003c\/strong\u003e The paint is rated water resistant rather than fully waterproof, which is appropriate for the outdoor marine exposure engine and drive components see.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of paint is Moeller 025479?\u003c\/strong\u003e It is an acrylic lacquer, a formula chosen for extended staying power on engine and drive surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the spray pattern work on this can?\u003c\/strong\u003e The can uses a big-button spray head with a fan spray pattern, which helps cover larger areas of an engine or lower unit evenly in fewer passes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Moeller 025479 suitable for outdoor use?\u003c\/strong\u003e Yes, the paint is designated for outdoor use, matching the outdoor exposure that stern drives and lower units are subjected to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Moeller 025479 work on inboard engines as well as outboards?\u003c\/strong\u003e Yes, this charcoal metallic paint is formulated for all outboard and inboard engines, in addition to stern drives and lower units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of a can of Moeller 025479?\u003c\/strong\u003e A can of Moeller 025479 weighs 1 pound.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991040143579,"sku":"MOE-025479","price":14.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81ho-tKdLHL.jpg?v=1784490714"},{"product_id":"moeller-metallic-blue-silver-yamaha-engine-paint-12-oz-mpn-025469-marine-touch-up-spray","title":"Moeller EP Yamaha Marine Touch-Up Paint, Metallic Blue Silver, 12 oz (P\/N 025469)","description":"\u003cp\u003eMoeller EP Yamaha Marine Paint in Metallic Blue Silver is a quality tested touch-up paint formulated specifically for the marine environment. It is designed for use on all outboard and inboard engines, stern drives, and lower unit applications, making it a versatile choice for restoring factory color and protecting exposed metal on Yamaha marine powerheads and drive components. The formula is a heat and solvent resistant acrylic lacquer built for the extended staying power that boat engines require, standing up to the constant exposure to fuel, oil, engine heat, and moisture that marine equipment faces on the water.\u003c\/p\u003e\u003cp\u003eThis paint uses a quick-dry formula that allows for faster recoating and handling, and it is both oil and gasoline resistant once cured, helping the finish hold up during routine engine maintenance and fueling. It comes in a 12 fluid ounce bottle under Moeller part number 025469, giving owners a straightforward way to match the original Metallic Blue Silver finish on their Yamaha Marine engine. Whether touching up scratches, chips, or corrosion spots, or refreshing the look of an entire lower unit or stern drive housing, this paint is formulated to bond well and resist the elements that typically cause marine touch-up paint to fail prematurely.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025469\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Metallic Blue Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid Volume:\u003c\/strong\u003e 12 Fluid Ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Bottle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormula:\u003c\/strong\u003e Heat and solvent resistant acrylic lacquer, quick-dry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance:\u003c\/strong\u003e Oil and gasoline resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Yamaha Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Vehicle Type:\u003c\/strong\u003e Yamaha Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Outboard and inboard engines, stern drives, and lower unit applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729254691\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eThis paint is formulated for Yamaha Marine outboard and inboard engines, stern drives, and lower units, and is designed to match the Metallic Blue Silver color used on Yamaha marine equipment.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines is Moeller part number 025469 designed for?\u003c\/strong\u003e Moeller EP Yamaha Marine Paint (025469) is formulated for use on all outboard and inboard engines, stern drives, and lower unit applications on Yamaha Marine equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this paint?\u003c\/strong\u003e This paint is Metallic Blue Silver, matched to the color used on Yamaha Marine engines and drive components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much paint is in one bottle?\u003c\/strong\u003e Each bottle of Moeller 025469 contains 12 fluid ounces of paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint resistant to oil and gasoline exposure?\u003c\/strong\u003e Yes, Moeller EP Yamaha Marine Paint is oil and gasoline resistant once applied, which suits the fuel and oil exposure common around marine engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does the paint take to dry?\u003c\/strong\u003e Moeller 025469 uses a quick-dry formula, allowing faster handling and recoating compared to standard touch-up paints.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint handle engine heat?\u003c\/strong\u003e The formula is a heat and solvent resistant acrylic lacquer built for the extended staying power that boat engines need, so it is designed to hold up under engine heat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of paint formula is used?\u003c\/strong\u003e Moeller part number 025469 is an acrylic lacquer paint, quality tested and formulated specifically for the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint be used on stern drives and lower units, not just the engine?\u003c\/strong\u003e Yes, Moeller EP Yamaha Marine Paint is formulated for outboard and inboard engines, stern drives, and lower unit applications, not just the powerhead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the bottle weigh?\u003c\/strong\u003e The 12 ounce bottle of Moeller 025469 weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Moeller product?\u003c\/strong\u003e Yes, this is genuine Moeller EP Yamaha Marine Paint, part number 025469, in Metallic Blue Silver.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this paint?\u003c\/strong\u003e The UPC for Moeller EP Yamaha Marine Paint, Metallic Blue Silver (025469) is 739729254691.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991041519835,"sku":"MOE-025469","price":15.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81FCw2D802L.jpg?v=1784490716"},{"product_id":"moeller-025107-evinrude-blue-metallic-engine-paint-12-oz-marine-spray-enamel","title":"Moeller 025107 Evinrude Blue Metallic Engine Paint, 12 oz. Aerosol","description":"\u003cp\u003eMoeller 025107 is a 12 ounce aerosol can of Evinrude Blue Metallic engine paint, formulated specifically for the marine environment. It is designed for use on all outboard and inboard engines, stern drives, and lower unit applications, giving boat owners an OEM-matching way to touch up chips, refinish a powerhead, or refresh a lower unit after maintenance. The paint is a heat and solvent resistant acrylic lacquer built for the extended staying power that boat engines require, standing up to engine heat, fuel exposure, and outdoor marine conditions. It is oil and gasoline resistant and features a quick-dry formula that lets a project move from prep to a finished coat without long delays between coats. Applied to metal surfaces, one can covers approximately 6 to 7 square feet per coat, making it sized for touch-up work and small component refinishing rather than full hull painting. The metallic Evinrude Blue finish matches the factory color used on many Evinrude powerheads and components, so repairs and touch-ups blend in rather than standing out. Because it is packaged as an aerosol, it applies evenly without the need for a separate sprayer or brush, and the can format keeps the paint ready to use straight out of the box.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025107\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Evinrude Blue Metallic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Type:\u003c\/strong\u003e Metallic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 12 ounce can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Volume:\u003c\/strong\u003e 12 fluid ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e Oil-based\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Liquid (aerosol)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Aerosol can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 6-7 square feet per coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Heat resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Recommendation:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor\/Outdoor Usage:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Uses:\u003c\/strong\u003e Engine, boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance Level:\u003c\/strong\u003e Water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729001325\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Moeller 025107 engine paint?\u003c\/strong\u003e It is Evinrude Blue Metallic, a metallic finish that matches the factory color used on many Evinrude engines and components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines can this paint be used on?\u003c\/strong\u003e Moeller 025107 is formulated for use on all outboard and inboard engines, stern drives, and lower unit applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint resistant to fuel and oil?\u003c\/strong\u003e Yes, the acrylic lacquer formula is oil and gasoline resistant, which suits it to engine and lower unit surfaces that see regular fuel and oil exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much area does one can cover?\u003c\/strong\u003e One 12 ounce can of Moeller 025107 covers approximately 6 to 7 square feet per coat on metal surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does the paint take to dry?\u003c\/strong\u003e Moeller 025107 uses a quick-dry formula, allowing multiple coats to be applied without extended wait times between applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint handle engine heat?\u003c\/strong\u003e Yes, it is a heat and solvent resistant acrylic lacquer designed for the extended staying power that boat engines need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the can?\u003c\/strong\u003e The Moeller 025107 Evinrude Blue Metallic engine paint comes in a 12 ounce aerosol can.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint waterproof once cured?\u003c\/strong\u003e It is rated water resistant, suiting it for use on marine engines and components exposed to spray and moisture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surface should this paint be applied to?\u003c\/strong\u003e Moeller 025107 is recommended for metal surfaces such as engine blocks, powerheads, and lower unit housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a can of Moeller 025107 weigh?\u003c\/strong\u003e A can of Moeller 025107 Evinrude Blue Metallic engine paint weighs 1.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Moeller 025107 an aerosol spray can or a brush-on paint?\u003c\/strong\u003e It is packaged as a 12 ounce aerosol can for spray application, not a brush-on paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint be used indoors?\u003c\/strong\u003e Moeller 025107 is intended for outdoor use given its formulation for marine engine environments.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991042044123,"sku":"MOE-025107","price":15.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/619aOLVgVgL.jpg?v=1784490716"},{"product_id":"moeller-johnson-white-engine-spray-paint-oem-172748-fits-1972-1980-johnson-outboards-mpn-025433","title":"Moeller Marine Engine Spray Paint 025433, Johnson White, OEM 172748, Fits 1972-1980 Johnson Outboards","description":"\u003cp\u003eThis Moeller Marine engine spray paint (part number 025433) is formulated in Johnson White to match the factory finish on Johnson outboard engines from 1972-1980. It is designed for touch-up and refinishing work on outboard powerheads and covers, restoring the original white engine color after repairs, corrosion removal, or general wear. The paint corresponds to OEM color reference 172748, making it a straightforward match for owners restoring or maintaining the factory appearance of their outboard.\u003c\/p\u003e\u003cp\u003ePackaged as a single spray can, it is easy to apply directly to prepared engine surfaces without special equipment. The product ships in package dimensions of 12 x 6 x 6 inches and weighs 1 pounds, and it comes as a single item package quantity of 1.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025433\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Johnson White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Engine Spray Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729254332\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Package Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 12 x 6 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eJohnson outboard engines, 1972-1980\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e172748\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does this paint fit?\u003c\/strong\u003e Moeller part number 025433 is formulated to match the factory white finish on Johnson outboard engines from 1972-1980.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM color does 025433 replace?\u003c\/strong\u003e It corresponds to OEM color reference 172748, so it matches the original factory white used on covered Johnson outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this paint?\u003c\/strong\u003e Johnson White, matching the factory engine color used on the applicable Johnson outboard models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the can weigh?\u003c\/strong\u003e The Moeller 025433 spray paint weighs 1 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions?\u003c\/strong\u003e The package measures 12 x 6 x 6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cans come in a package?\u003c\/strong\u003e Moeller 025433 ships with an item package quantity of 1, meaning one spray can per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Moeller Marine product?\u003c\/strong\u003e Yes, part number 025433 is manufactured by Moeller Marine as a color-matched engine spray paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this to touch up scratches or corrosion spots on my outboard?\u003c\/strong\u003e Yes, this spray paint is intended for touch-up and refinishing of Johnson outboard engine surfaces to restore the original white factory appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this paint work on other outboard brands?\u003c\/strong\u003e This paint is formulated to match Johnson White and corresponds to OEM reference 172748; it is intended for the applicable Johnson outboard engines from 1972-1980.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat form does the paint come in?\u003c\/strong\u003e Moeller 025433 is supplied as a spray can, allowing direct application without additional equipment.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991043223771,"sku":"MOE-025433","price":14.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71kChjWkS-L.jpg?v=1784490718"},{"product_id":"moeller-marine-engine-spray-paint-volvo-i-o-grey-1989-present-12-oz-color-matched-acrylic-lacquer-mpn-025488","title":"Moeller Marine Engine Spray Paint, Volvo I\/O Grey, 1989-Present Fitment, Part 025488","description":"\u003cp\u003eMoeller Marine part 025488 is a color-matched engine spray paint formulated in Volvo I\/O Grey, matching the original factory finish used on Volvo inboard\/outboard (I\/O) engines from 1989 to present. The paint uses a heat and solvent resistant acrylic lacquer formula developed specifically for the marine environment, giving it the staying power boat engines need when exposed to engine heat, fuel and oil splash, and constant sun and moisture exposure on the water.\u003c\/p\u003e\u003cp\u003eThis spray paint is suited for use on outboard and inboard engines as well as stern drive and lower unit applications, making it a practical touch-up or refinish option anywhere the original Volvo I\/O grey finish has faded, chipped, or corroded. Each can holds 12 ounces of net paint content and is packaged for easy handling and storage aboard or in the shop.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025488\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Volvo I\/O Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Acrylic Lacquer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Outboard, inboard, stern drive, and lower unit engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Content:\u003c\/strong\u003e 12 ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 8 x 2.5 x 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729254882\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Engine Spray Paint\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolvo I\/O engines, 1989-Present\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Moeller part 025488?\u003c\/strong\u003e Moeller Marine part 025488 is Volvo I\/O Grey, color matched to the original factory finish used on Volvo I\/O engines from 1989 to present.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does this paint fit?\u003c\/strong\u003e This Volvo I\/O Grey engine paint is intended for Volvo I\/O engines built from 1989 to present, and is also suitable for general use on outboard and inboard engines, stern drives, and lower units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint heat resistant?\u003c\/strong\u003e Yes, part 025488 uses a heat and solvent resistant acrylic lacquer formula designed to hold up under the heat and chemical exposure a boat engine sees.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much paint is in each can?\u003c\/strong\u003e Each can of Moeller 025488 engine paint contains 12 ounces of net paint content.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this paint on an outboard motor?\u003c\/strong\u003e Yes, Moeller 025488 is formulated for use on outboard and inboard engines as well as stern drive and lower unit applications, not just Volvo I\/O engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the can of paint weigh?\u003c\/strong\u003e The Moeller Marine 025488 engine paint weighs 1 pound as shipped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this genuine Volvo paint or an aftermarket match?\u003c\/strong\u003e Part 025488 is a Moeller Marine engine paint that is color matched to the Volvo I\/O Grey factory finish; it is a Moeller Marine product, not a Volvo-branded paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this paint made of?\u003c\/strong\u003e Moeller 025488 is an acrylic lacquer paint, formulated specifically to withstand the marine engine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a spray paint?\u003c\/strong\u003e Yes, Moeller part 025488 is packaged as an engine spray paint in the Volvo I\/O Grey color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the can?\u003c\/strong\u003e The Moeller 025488 Volvo I\/O Grey paint can measures 8 x 2.5 x 2.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat years of Volvo I\/O engines match this grey color?\u003c\/strong\u003e This grey shade is color matched to Volvo I\/O engines from 1989 to present.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this paint resist fuel and solvent exposure?\u003c\/strong\u003e Yes, the acrylic lacquer formula used in Moeller 025488 is solvent resistant, which helps it hold up near fuel and engine chemicals.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991043748059,"sku":"MOE-025488","price":15.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/717d2k3K6GL.jpg?v=1784490719"},{"product_id":"moeller-marine-engine-spray-paint-mercury-phantom-black-1960-present-12-oz-aerosol-mpn-025350","title":"Moeller Engine Spray Paint, Mercury Phantom Black, 12 Oz Aerosol - 025350","description":"\u003cp\u003eMoeller Engine Spray Paint in Mercury Phantom Black is a 12 ounce aerosol touch-up and refinishing paint formulated specifically for the marine environment. It is color matched to restore the original factory finish on outboard and inboard engines, stern drive units, and lower unit applications, giving worn or chipped engine housings a fresh, professional-looking finish without a trip to the shop.\u003c\/p\u003e\u003cp\u003eThe paint uses a heat and solvent resistant acrylic lacquer formula built to withstand the extended exposure and staying power that boat engines require, including sun, moisture, and engine heat. It sprays on as a full-coverage gloss black finish from an aerosol can, so no separate sprayer or mixing is needed for do-it-yourself application. Moeller keeps its engine paint line matched to current OEM color offerings, making this Phantom Black shade a straightforward match for Mercury engine components using that color.\u003c\/p\u003e\u003cp\u003eThis paint is intended for use on metal surfaces on outboard and inboard marine engines, stern drives, and lower units, and is suited for outdoor, water-resistant service once cured. Each can covers a 12 fluid ounce volume, sold as a single unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025350\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor Name:\u003c\/strong\u003e Mercury Phantom Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Type:\u003c\/strong\u003e Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Volume:\u003c\/strong\u003e 12 fluid ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Aerosol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e Spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Recommendation:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Uses For Product:\u003c\/strong\u003e Engine, Boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor\/Outdoor Usage:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance Level:\u003c\/strong\u003e Water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Full\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729253502\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Moeller part number 025350?\u003c\/strong\u003e Moeller 025350 is Mercury Phantom Black, a gloss black finish color matched to Mercury engine components using that shade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint safe to use on a boat engine?\u003c\/strong\u003e Yes, this Moeller aerosol paint uses a heat and solvent resistant acrylic lacquer formula specifically made for the marine environment and boat engine surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many ounces are in a can of Moeller 025350?\u003c\/strong\u003e Each can holds 12 fluid ounces of Mercury Phantom Black spray paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces can Moeller 025350 be used on?\u003c\/strong\u003e This spray paint is recommended for metal surfaces and is intended for use on outboard and inboard engines, stern drive units, and lower unit applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Moeller 025350 an aerosol or a brush-on paint?\u003c\/strong\u003e It is an aerosol spray paint, dispensed from a 12 ounce spray can for do-it-yourself application without a separate sprayer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Moeller Phantom Black paint have?\u003c\/strong\u003e Moeller 025350 dries to a gloss black finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Moeller 025350 be used outdoors?\u003c\/strong\u003e Yes, this paint is formulated for outdoor use and offers water resistance once applied to engine surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this paint match the original factory engine color?\u003c\/strong\u003e Yes, Moeller 025350 is color matched to the Mercury Phantom Black factory finish, and Moeller maintains its paint colors to current OEM color selections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a can of Moeller 025350 weigh?\u003c\/strong\u003e The Moeller Mercury Phantom Black engine spray paint weighs 1 pounds per can.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Moeller 025350 suitable for both outboard and inboard engines?\u003c\/strong\u003e Yes, this paint is intended for use on all outboard and inboard engines, as well as stern drive and lower unit applications.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991044174043,"sku":"MOE-025350","price":14.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71mJI4Ok1aL.jpg?v=1784490719"},{"product_id":"moeller-color-vision-marine-engine-spray-paint-gloss-white-12-oz-aerosol-025109","title":"Moeller Marine Color Vision Engine Paint, Sea Foam Gloss White, 12 oz Aerosol Spray (025109)","description":"\u003cp\u003eMoeller Color Vision engine paint in Sea Foam Gloss White is an aerosol touch-up and refinishing paint formulated specifically for the marine environment. It is designed for use on all outboard and inboard engines, stern drive units, and lower units, making it a go-to choice for boat owners restoring or touching up engine and drive components after corrosion, chips, or general wear. The color is matched to the engine's original equipment color, so it blends in rather than standing out as an obvious repaint.\u003c\/p\u003e\u003cp\u003eThe oil-based formula is built to withstand the marine environment, along with ongoing exposure to fuel, oil, and engine operating temperatures, so the finish holds up under real running conditions rather than fading or lifting after a season. A quick-dry formula speeds up the refinishing process, and the can's spray valve is designed to lay down a wide, even spray pattern, which makes covering larger surfaces like engine blocks and lower unit housings faster and smoother than a narrow, standard spray pattern would allow. Each can holds 12 fluid ounces of gloss white paint in an aerosol container, ready to use straight out of the box with no mixing required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025109\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Sea Foam Gloss White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Volume:\u003c\/strong\u003e 12 fluid ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Aerosol spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e Oil-based\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Outboard and inboard engines, stern drive and lower unit applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729251096\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Moeller part number 025109?\u003c\/strong\u003e Moeller 025109 is Sea Foam Gloss White, a gloss finish color-matched to the original equipment color used on many marine engines and drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint be used on both outboard and inboard engines?\u003c\/strong\u003e Yes. Moeller Color Vision Sea Foam Gloss White (025109) is formulated for use on all outboard and inboard engines, as well as stern drive and lower unit applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much paint is in one can?\u003c\/strong\u003e Each can of Moeller 025109 Sea Foam Gloss White contains 12 fluid ounces of aerosol paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint resistant to fuel and oil exposure?\u003c\/strong\u003e Yes, the Moeller Color Vision formula used in part 025109 is oil and gasoline resistant, which matters for parts mounted near an engine or fuel system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does the paint take to dry?\u003c\/strong\u003e Moeller 025109 uses a quick-dry formula, letting the Sea Foam Gloss White finish cure faster than a standard slow-dry marine enamel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this paint match the factory color on my engine?\u003c\/strong\u003e Sea Foam Gloss White (025109) is color matched to the engine's original equipment color, so it is designed to blend with the factory finish rather than create a visibly different repaint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the can?\u003c\/strong\u003e The Moeller 025109 Sea Foam Gloss White aerosol can weighs 1.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of spray valve does this can use?\u003c\/strong\u003e Part 025109 has a spray valve designed to produce a wide, even spray pattern, which speeds up coverage on larger surfaces like engine blocks and lower units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the finish gloss or matte?\u003c\/strong\u003e Moeller 025109 has a gloss finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is this paint recommended for?\u003c\/strong\u003e This aerosol paint is recommended for outboard and inboard engines, stern drives, and lower units in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an oil-based or water-based paint?\u003c\/strong\u003e Moeller 025109 Sea Foam Gloss White is an oil-based paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The UPC for Moeller 025109 Sea Foam Gloss White is 739729251096.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991046533339,"sku":"MOE-025109","price":14.48,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41fn0iVTy3L.jpg?v=1784490722"},{"product_id":"moeller-marine-engine-spray-paint-omc-white-1964-76-12-oz-acrylic-aerosol-for-johnson-evinrude-gale-outboards-025425","title":"Moeller 025425 OMC White Engine Spray Paint, 12 oz Aerosol Acrylic Lacquer for Evinrude Johnson Gale Outboard Motors","description":"\u003cp\u003eMoeller 025425 is a 12 oz aerosol engine spray paint in OMC White, color matched to the original factory finish used on Evinrude, Johnson, and Gale outboard motors. The formula is a heat and solvent resistant acrylic lacquer built to hold up under the temperature swings and fuel\/oil exposure that boat engines see, giving the finish extended staying power compared to standard automotive touch-up paint. It is designed for use on outboard and inboard engines as well as stern drive and lower unit applications, making it a practical choice for refinishing power heads, lower units, and other engine components where the original White finish has faded, chipped, or been sanded during repair work. The aerosol can allows for even, controlled application without the need for a separate sprayer, and the White shade is matched specifically to the OMC (Evinrude\/Johnson\/Gale) engine color used on these motors. Because it is sold in a 12 oz can, it is sized for spot touch-up and full small-component refinishing rather than large surface repaints. This paint is intended strictly for engine and marine hardware surfaces and is not a general-purpose or automotive body paint.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025425\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e OMC White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Volume:\u003c\/strong\u003e 12 fluid ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e Acrylic Lacquer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Aerosol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Bottle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729254257\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00739729254257\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Evinrude, Johnson, Gale outboard motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Uses:\u003c\/strong\u003e Outboard, inboard, stern drive, and lower unit engine applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Moeller 025425?\u003c\/strong\u003e Moeller 025425 is an OMC White engine paint, color matched to the original White finish used on Evinrude, Johnson, and Gale outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint heat resistant?\u003c\/strong\u003e Yes, Moeller 025425 is a heat and solvent resistant acrylic lacquer formulated to withstand the temperature and chemical exposure boat engines are subjected to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint be used on inboard engines as well as outboards?\u003c\/strong\u003e Moeller 025425 is designed for use on both outboard and inboard engines, as well as stern drive and lower unit applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much paint is in one can?\u003c\/strong\u003e Each can of Moeller 025425 OMC White engine paint contains 12 fluid ounces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is Moeller 025425 applied?\u003c\/strong\u003e Moeller 025425 comes in an aerosol can, allowing direct spray application without needing a separate paint gun or sprayer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this paint match my engine's original factory color?\u003c\/strong\u003e Moeller 025425 is formulated as OMC White, color matched to the original White used on Evinrude, Johnson, and Gale outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of paint is Moeller 025425?\u003c\/strong\u003e It is an acrylic lacquer, formulated specifically for marine engine environments rather than general automotive or household use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a can of Moeller 025425 weigh?\u003c\/strong\u003e A can of Moeller 025425 OMC White engine paint weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Moeller 025425 be used on lower units?\u003c\/strong\u003e Yes, Moeller 025425 is suitable for lower unit applications in addition to engine and stern drive surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for Moeller 025425?\u003c\/strong\u003e The UPC for Moeller 025425 OMC White engine paint is 739729254257.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Moeller 025425 only for Evinrude and Johnson motors?\u003c\/strong\u003e Moeller 025425 OMC White is color matched for Evinrude, Johnson, and Gale outboard motors, though it is formulated for general outboard and inboard engine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Moeller 025425 include a primer?\u003c\/strong\u003e Moeller 025425 is the topcoat paint itself; the sources do not indicate a primer is included in this can.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991047287003,"sku":"MOE-025425","price":16.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71HZZgtkm2L.jpg?v=1784490724"},{"product_id":"moeller-johnson-evinrude-white-engine-spray-paint-12-oz-color-matched-oem-173744-1972-present","title":"Moeller 025461 Johnson\/Evinrude White Engine Spray Paint, OEM 173744, 1972-Up, 12 oz","description":"\u003cp\u003eMoeller 025461 is a Johnson\/Evinrude White engine spray paint formulated as a heat and solvent resistant acrylic lacquer built for the extended staying power that boat engines require. The color is matched to the original factory color of Johnson\/Evinrude powerheads, giving a factory-correct touch-up or full refinish rather than a generic off-shade repaint. It is suited for use on outboard and inboard engines as well as stern drive and lower unit applications, making it a versatile choice for engine maintenance, corrosion touch-up, and cosmetic refinishing across a boat's powertrain.\u003c\/p\u003e\u003cp\u003eThe formula is a liquid acrylic lacquer supplied in a 12 fluid ounce spray can, with a full cure time of 72 hours to reach maximum heat and solvent resistance. It carries a low VOC formulation for reduced emissions during application and is rated water resistant once cured, holding up to outdoor marine exposure. The high-gloss white finish is intended for use on metal engine surfaces, restoring the appearance of the powerhead while protecting it from the elements.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025461\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Type:\u003c\/strong\u003e High-Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e Acrylic Lacquer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Volume:\u003c\/strong\u003e 12 fluid ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Cure Time:\u003c\/strong\u003e 72 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Recommendation:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Low VOC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor\/Outdoor Usage:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729254615\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 173744\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eJohnson\/Evinrude, 1972-Up\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e173744\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines is Moeller 025461 formulated for?\u003c\/strong\u003e Moeller 025461 is color matched to Johnson\/Evinrude White and is intended for use on all outboard and inboard engines, as well as stern drive and lower unit applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this paint cross-reference to an OEM number?\u003c\/strong\u003e Yes, Moeller 025461 corresponds to OEM part number 173744, so it can be ordered under either reference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much paint is in one can?\u003c\/strong\u003e Each can of Moeller 025461 contains 12 fluid ounces of acrylic lacquer paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does the paint take to fully cure?\u003c\/strong\u003e Full cure time for Moeller 025461 is 72 hours, after which the heat and solvent resistant properties are fully developed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint resistant to heat and fuel exposure?\u003c\/strong\u003e The acrylic lacquer formula in Moeller 025461 is heat and solvent resistant, designed for the demands of boat engine surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Moeller 025461 and will it match my engine?\u003c\/strong\u003e It is a high-gloss white color matched to the original factory color used on Johnson\/Evinrude engines from 1972-Up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Moeller 025461 a low-VOC paint?\u003c\/strong\u003e Yes, this engine spray paint is formulated as low VOC while still providing heat and solvent resistant coverage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is this paint recommended for?\u003c\/strong\u003e Moeller 025461 is recommended for application on metal surfaces, such as outboard and inboard engine housings and lower units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the paint water resistant once dry?\u003c\/strong\u003e After curing, Moeller 025461 is rated water resistant, suitable for outdoor marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is Moeller 025461 packaged?\u003c\/strong\u003e It comes as a single 12 fluid ounce aerosol spray can, sold individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat years of Johnson\/Evinrude engines does this white paint match?\u003c\/strong\u003e Moeller 025461 is color matched for Johnson\/Evinrude engines from 1972-Up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint be used on lower units and stern drives, not just the powerhead?\u003c\/strong\u003e Yes, Moeller 025461 is labeled for use on outboard and inboard engines, stern drives, and lower unit applications.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991049580763,"sku":"MOE-025461","price":14.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41irGmZywSL.jpg?v=1784490727"},{"product_id":"moeller-engine-spray-paint-johnson-evinrude-light-blue-metallic-1978-1987-12-oz-aerosol-mpn-025454","title":"Moeller Engine Spray Paint, Evinrude Light Blue Metallic, OEM 173547 Color Match, 12 oz Aerosol","description":"\u003cp\u003eThis Moeller engine spray paint (part number 025454) is a heat and solvent resistant acrylic lacquer formulated for the extended staying power that boat engines need. It is color matched to the Johnson\/Evinrude Light Blue Metallic factory finish used on engines from 1978 to 1987, cross-referencing OEM color code 173547, so touch-ups and repaints blend in with the original engine color instead of standing out as a mismatched patch. The formula is designed for use on all outboard and inboard engines, as well as stern drive and lower unit applications, making it suitable for touching up chips, scratches, and worn spots on the powerhead, cowling, and drive components.\u003c\/p\u003e\u003cp\u003eEach can holds 12 ounces of paint (12 fluid ounces \/ 12.0 ounce net weight) in an aerosol spray format for even, easy application without a brush. The paint has a gloss finish and is recommended for use on metal surfaces, and it is intended for outdoor\/marine exposure. It is sold as a single 12 oz can (package quantity of 1).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025454\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Johnson\/Evinrude Light Blue Metallic ('78-87)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Color Cross Reference:\u003c\/strong\u003e 173547\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight (Paint):\u003c\/strong\u003e 12 ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Weight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Aerosol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e Acrylic Lacquer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Recommendation:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Use:\u003c\/strong\u003e Engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor\/Outdoor Usage:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 10.668 cm L x 9.652 cm W x 19.558 cm H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729254547\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJohnson\/Evinrude engines finished in Light Blue Metallic ('78-87)\u003c\/li\u003e\n\u003cli\u003eAll outboard and inboard engines, stern drive and lower unit applications requiring this color match\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e173547\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines is Moeller part number 025454 color matched to?\u003c\/strong\u003e Moeller 025454 is color matched to Johnson\/Evinrude engines finished in Light Blue Metallic from 1978 to 1987, cross-referencing OEM color code 173547.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint safe to use on any engine, or only outboards?\u003c\/strong\u003e The acrylic lacquer formula in Moeller 025454 is designed for use on all outboard and inboard engines, as well as stern drive and lower unit applications, not just outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much paint is in one can of Moeller 025454?\u003c\/strong\u003e Each can of Moeller 025454 contains 12 ounces (12 fluid ounces) of paint, sold as a single can per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does OEM color code 173547 mean for this product?\u003c\/strong\u003e 173547 is the OEM color reference that Moeller 025454 is formulated to match, so it reproduces the original Johnson\/Evinrude Light Blue Metallic factory finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Moeller 025454 a brush-on or spray paint?\u003c\/strong\u003e It is an aerosol spray paint in a can, giving an even gloss finish without brushing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does this engine paint have?\u003c\/strong\u003e Moeller 025454 dries to a gloss finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint resistant to heat and fuel\/solvent exposure?\u003c\/strong\u003e Yes, Moeller 025454 is a heat and solvent resistant acrylic lacquer formulated for the extended staying power that boat engines require.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is this spray paint recommended for?\u003c\/strong\u003e Moeller 025454 is recommended for use on metal surfaces, such as engine powerheads and cowlings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a can of Moeller 025454 weigh?\u003c\/strong\u003e A can of Moeller 025454 weighs 1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint intended for indoor or outdoor\/marine use?\u003c\/strong\u003e Moeller 025454 is intended for outdoor use, matching the exposure conditions of boat engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the Moeller 025454 spray can?\u003c\/strong\u003e The Moeller 025454 spray paint ships in packaging measuring 10.668 cm L x 9.652 cm W x 19.558 cm H.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Moeller 025454 come in more than one can per order?\u003c\/strong\u003e No, Moeller 025454 is sold with a package quantity of 1, meaning one 12 ounce can per order.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991051251931,"sku":"MOE-025454","price":16.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61dp-fNDDnL.jpg?v=1784490730"},{"product_id":"moeller-color-vision-engine-spray-paint-crusader-blue-12-oz-marine-engine-aerosol-mpn-025491","title":"Moeller Engine Spray Paint, Crusader Blue, Marine Formulated Aerosol, 12 Fluid Ounces","description":"\u003cp\u003eMoeller Engine Spray Paint in Crusader Blue is a color-matched touch-up and refinish paint formulated specifically for marine engines. It is designed to match the original Crusader Blue engine color, making it suited for touch-ups, full recoats, or refurbishing engine components where the factory finish has faded, chipped, or worn away. The formula is rated for use in temperatures up to 250 degrees, so it holds up under the heat generated by running engines rather than discoloring or breaking down like a general-purpose spray paint.\u003c\/p\u003e\u003cp\u003eThis paint is formulated for the marine environment and is intended for use on outboard and inboard engines, stern drive units, and lower unit applications, giving it broad use across most engine types found on a boat. It has a quick-dry formula that shortens the time between coats and gets the engine back in service faster. Because engine compartments are exposed to fuel and lubricants, the paint is also oil and gasoline resistant once cured, and it carries water resistance for use in a marine setting. It is packaged as a 12 fluid ounce aerosol can, applied as a spray for even coverage over engine blocks, housings, and other painted engine surfaces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025491\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Crusader Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Type:\u003c\/strong\u003e Semi-Gloss or Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Aerosol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Volume:\u003c\/strong\u003e 12 Fluid Ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1 Count (Pack of 1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Temperature Rating:\u003c\/strong\u003e 250 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Marine Formulated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Uses For Product:\u003c\/strong\u003e Engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor\/Outdoor Usage:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance Level:\u003c\/strong\u003e Water Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.02 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729254912\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Moeller part number 025491?\u003c\/strong\u003e Moeller 025491 is Crusader Blue, formulated to match the original color of Crusader engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint safe to use on a running engine?\u003c\/strong\u003e Yes, Moeller Engine Spray Paint in Crusader Blue is rated for use up to 250 degrees, so it is designed to withstand the heat an engine generates during operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint be used on outboard engines, not just inboards?\u003c\/strong\u003e It is formulated for use on all outboard and inboard engines, as well as stern drive and lower unit applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much paint is in one can of Moeller 025491?\u003c\/strong\u003e Each can holds 12 fluid ounces and is sold as a single count aerosol can.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this paint resist gasoline and oil exposure?\u003c\/strong\u003e Yes, once applied, Moeller Crusader Blue engine paint is oil and gasoline resistant, which matters in an engine compartment where both are common.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does the paint dry?\u003c\/strong\u003e It uses a quick-dry formula, allowing faster recoating and a shorter turnaround before the engine can be put back into service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint made specifically for marine use?\u003c\/strong\u003e Yes, Moeller 025491 is formulated for the marine environment and carries water resistance for that setting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the finish of Moeller Crusader Blue engine paint?\u003c\/strong\u003e The finish is listed as semi-gloss or gloss.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the paint applied?\u003c\/strong\u003e Moeller 025491 comes in an aerosol can and is applied by spraying directly onto the engine surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of one can of this engine paint?\u003c\/strong\u003e One can of Moeller Crusader Blue engine spray paint weighs 1.02 pounds.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991061606619,"sku":"MOE-025491","price":17.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/416giofy-tL.jpg?v=1784490745"},{"product_id":"moeller-sandable-primer-platinum-grey-marine-sandable-primer-coat-mpn-025740","title":"Moeller Sandable Primer, Platinum Grey, Marine Primer","description":"\u003cp\u003eMoeller Sandable Primer in Platinum Grey is a marine-grade primer formulated for use on boat surfaces prior to finish coating. As a sandable primer, it is designed to be smoothed after application to create an even, uniform base before topcoat paint or gelcoat finish is applied. The Platinum Grey shade provides a neutral, consistent undercoat that helps subsequent paint colors achieve true, even coverage.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025740\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Sandable Primer Platinum Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Marine Primers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Platinum Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Sandable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729257401\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Moeller part number 025740?\u003c\/strong\u003e Moeller 025740 is a Sandable Primer in Platinum Grey, made for marine surface preparation before topcoat finishing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this primer?\u003c\/strong\u003e The finish is Platinum Grey, as designated for Moeller part number 025740.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this primer sandable?\u003c\/strong\u003e Yes, Moeller 025740 is formulated as a sandable primer, meaning it can be sanded smooth once applied to prepare the surface for topcoat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this product weigh?\u003c\/strong\u003e Moeller Sandable Primer Platinum Grey (part number 025740) weighs 1.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is this?\u003c\/strong\u003e This item is listed under Marine Primers, and is manufactured by Moeller under part number 025740.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Moeller primer?\u003c\/strong\u003e The UPC for Moeller Sandable Primer Platinum Grey, part number 025740, is 739729257401.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes this sandable primer?\u003c\/strong\u003e This sandable primer is made by Moeller, part number 025740, in the Platinum Grey finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Moeller 025740 intended for marine use?\u003c\/strong\u003e Yes, Moeller 025740 is categorized as a Marine Primer, Platinum Grey in color.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991062589659,"sku":"MOE-025740","price":15.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/25740__59735.1739463013.500.750.jpg?v=1785329134"},{"product_id":"moeller-ep-honda-silver-metallic-engine-paint-12-oz-acrylic-aerosol-025516","title":"Moeller Silver Metallic Engine Paint for Honda Outboard and Inboard Engines, 12 oz Aerosol","description":"\u003cp\u003eMoeller Silver Metallic engine paint is an acrylic lacquer formulated to match the factory finish on Honda marine engines. It is designed for use on all outboard and inboard engines, as well as stern drive units and lower units, giving a fast-drying, durable metallic coat that restores the original color after touch-ups, repairs, or general engine refinishing. The acrylic lacquer formula is engineered for extended staying power in the marine environment, holding up to the heat, vibration, and moisture that engine housings and lower units are exposed to on the water.\u003c\/p\u003e\u003cp\u003eEach can delivers a fast-drying metallic finish over approximately 10 square feet per coat, making it suitable for spot touch-ups or full engine repaints. The aerosol format allows for even, even coverage on curved engine covers and housings without the need for spray equipment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025516\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver Metallic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Type:\u003c\/strong\u003e Metallic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e Acrylic Lacquer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Aerosol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Volume:\u003c\/strong\u003e 12 fluid ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1 Count\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 10 square feet per coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Uses For Product:\u003c\/strong\u003e Engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Recommendation:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor Outdoor Usage:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance Level:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines is Moeller Silver Metallic paint designed for?\u003c\/strong\u003e Moeller Silver Metallic engine paint (part number 025516) is formulated for use on all outboard and inboard engines, as well as stern drive units and lower units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an acrylic or enamel paint?\u003c\/strong\u003e Moeller 025516 is an acrylic lacquer, formulated for extended staying power on marine engine surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much area does one can cover?\u003c\/strong\u003e One can of Moeller Silver Metallic paint (025516) covers approximately 10 square feet per coat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the can?\u003c\/strong\u003e The Moeller 025516 Silver Metallic engine paint comes in a 12 fluid ounce aerosol can.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the paint dry quickly?\u003c\/strong\u003e Yes, Moeller Silver Metallic engine paint (025516) is a fast-drying formula.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint waterproof once cured?\u003c\/strong\u003e Yes, Moeller 025516 has a waterproof water resistance rating once applied and cured.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surface is this paint meant for?\u003c\/strong\u003e Moeller Silver Metallic paint (025516) is recommended for use on metal surfaces, such as engine housings and lower units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a can of this paint weigh?\u003c\/strong\u003e A can of Moeller Silver Metallic engine paint, part number 025516, weighs 1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint be used indoors?\u003c\/strong\u003e Moeller 025516 is intended for outdoor usage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cans come in a package?\u003c\/strong\u003e Moeller Silver Metallic engine paint (025516) is sold as a single 1 Count aerosol can per package.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991064719579,"sku":"MOE-025516","price":15.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51tUw-E7FpL.jpg?v=1784490752"},{"product_id":"moeller-marine-engine-clear-coat-high-gloss-lacquer-spray-12-oz-aerosol-025519","title":"Moeller Clear Coat High Gloss Lacquer Spray Paint, 12 oz - 025519","description":"\u003cp\u003eMoeller Clear Coat High Gloss Lacquer (025519) is a 12 oz aerosol clear coat formulated for the marine environment. It is designed for use on all outboard and inboard engines, as well as stern drive and lower unit applications, giving painted or metal engine surfaces a protective, high-gloss finish. The oil-based lacquer sprays on with a quick-dry formula, so coated surfaces are ready to handle sooner than slower-curing clear coats, which is useful when touching up an engine cover or lower unit without taking the boat out of service for long.\u003c\/p\u003e\u003cp\u003eOnce cured, the finish resists both oil and gasoline exposure, making it well suited to the engine bay and drive areas where fuel and oil contact is common. It also carries UV resistance, helping the clear coat hold its high-gloss look and protect the surface beneath it from sun exposure and fading over time. The aerosol can format gives even, controllable coverage over engine housings, brackets, and other metal surfaces recommended for this product.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025519\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Clear Coat Lacquer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Aerosol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Volume:\u003c\/strong\u003e 12 Fluid Ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Type:\u003c\/strong\u003e High-Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e Oil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Recommendation:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Uses For Product:\u003c\/strong\u003e Exterior\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e UV Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance:\u003c\/strong\u003e Oil and gasoline resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729255193\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Moeller Clear Coat High Gloss Lacquer 025519 used for?\u003c\/strong\u003e Moeller 025519 is a 12 oz aerosol clear coat lacquer formulated for the marine environment and intended for use on all outboard and inboard engines, plus stern drive and lower unit applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does the clear coat take to dry?\u003c\/strong\u003e Moeller 025519 uses a quick-dry formula, so the clear coat cures faster than a standard slow-drying lacquer, letting you get the engine or drive component back into service sooner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this clear coat resistant to oil and gasoline?\u003c\/strong\u003e Yes, once cured the Moeller 025519 clear coat has oil and gasoline resistance, which suits it to engine and drive areas where fuel and oil contact is common.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Moeller 025519 clear coat resist UV fading?\u003c\/strong\u003e The finish is UV resistant, helping the high-gloss clear coat hold its appearance and protect the surface underneath from sun exposure over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size can does Moeller 025519 come in?\u003c\/strong\u003e Moeller Clear Coat High Gloss Lacquer 025519 is packaged as a 12 fluid ounce aerosol can.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is this clear coat recommended for?\u003c\/strong\u003e Moeller 025519 is recommended for use on metal surfaces, such as engine housings and drive components on outboard, inboard, and stern drive setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the finish glossy or matte?\u003c\/strong\u003e 025519 is a high-gloss clear coat, giving a shiny finish rather than a satin or matte look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Moeller 025519 clear coat?\u003c\/strong\u003e It is a clear, colorless lacquer, applied as a protective clear topcoat rather than a pigmented paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is Moeller 025519 applied?\u003c\/strong\u003e Moeller 025519 is an aerosol spray can product, applied by spraying it directly onto the prepared metal surface for an even coat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this clear coat be used on a lower unit?\u003c\/strong\u003e Yes, Moeller 025519 is formulated for lower unit applications in addition to outboard and inboard engines and stern drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the net weight of the Moeller 025519 can?\u003c\/strong\u003e The Moeller Clear Coat High Gloss Lacquer 025519 aerosol can weighs 1 pound.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991065309403,"sku":"MOE-025519","price":14.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Moeller-Clear-Coat__01237.1722488358.500.750.jpg?v=1785188620"},{"product_id":"moeller-yamaha-outboard-engine-spray-paint-dark-blue-metallic-1994-1997-12-oz-aerosol-mpn-025515","title":"Moeller Yamaha Dark Blue Metallic Engine Spray Paint, 12 oz, Part 025515","description":"\u003cp\u003eThis Moeller engine spray paint is color matched to Yamaha Dark Blue Metallic outboard and inboard engine finishes, giving boat owners an exact-match touch-up option for scratches, corrosion spots, and worn engine covers. The formula is a heat and solvent resistant acrylic lacquer built specifically for the punishment marine engines endure, including exposure to fuel, oil, exhaust heat, and constant sun and salt spray. Because it is formulated for the marine environment, it holds its color and finish far longer than general-purpose automotive touch-up paints.\u003c\/p\u003e\u003cp\u003eThe paint is packaged as a 12 fluid ounce aerosol can for even, drip-free coverage over curved cowlings, powerheads, and lower unit housings. It is designed for use on all outboard and inboard engines, as well as stern drive and lower unit applications, making it a practical shop or dock-side item for any Yamaha-color engine needing a cosmetic refresh rather than a full repaint. The metallic finish is intended to blend into the factory-applied Dark Blue Metallic color used on Yamaha powerheads.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025515\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Yamaha Dark Blue Metallic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Type:\u003c\/strong\u003e Metallic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Volume:\u003c\/strong\u003e 12 Fluid Ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e Spray Aerosol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Uses For Product:\u003c\/strong\u003e Engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Recommendation:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Heat Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor\/Outdoor Usage:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 6.35 cm L x 4.826 cm W x 20.32 cm H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729255155\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eYamaha engines finished in Dark Blue Metallic (1994-1997)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Moeller part 025515?\u003c\/strong\u003e Moeller 025515 is a Dark Blue Metallic spray paint color matched to the finish used on Yamaha engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this paint match my Yamaha engine's factory color exactly?\u003c\/strong\u003e Yes, Moeller 025515 is formulated and color matched specifically to Yamaha Dark Blue Metallic engine finishes so it blends with the factory paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much paint is in each can of Moeller 025515?\u003c\/strong\u003e Each aerosol can holds 12 fluid ounces of Dark Blue Metallic paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint be used on both outboard and inboard engines?\u003c\/strong\u003e Moeller 025515 is designed for use on all outboard and inboard engines as well as stern drive and lower unit applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Moeller 025515 heat resistant?\u003c\/strong\u003e Yes, it is a heat and solvent resistant acrylic lacquer formulated to hold up to the heat and chemical exposure boat engines experience.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is this spray paint meant for?\u003c\/strong\u003e Moeller 025515 is recommended for use on metal surfaces such as engine covers, powerheads, and lower unit housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Moeller 025515 an aerosol or a brush-on paint?\u003c\/strong\u003e It is packaged as a spray aerosol can for even coverage without brush marks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a can of Moeller 025515 weigh?\u003c\/strong\u003e A can of Moeller 025515 Dark Blue Metallic engine paint weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Moeller 025515 spray can?\u003c\/strong\u003e The packaged can measures 6.35 cm long by 4.826 cm wide by 20.32 cm high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint suitable for outdoor marine use?\u003c\/strong\u003e Yes, Moeller 025515 is rated for outdoor use and is built to withstand marine exposure on engine surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Moeller 025515 genuine Moeller product or a generic match?\u003c\/strong\u003e Moeller 025515 is a genuine Moeller-branded engine touch-up paint, not a generic aftermarket color match.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991065735387,"sku":"MOE-025515","price":15.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61dp-fNDDnL_ac9b2a54-2623-4eb4-be41-e040cb3d3028.jpg?v=1784490755"},{"product_id":"moeller-marine-025804-suzuki-shadow-black-engine-spray-paint-acrylic-lacquer-for-outboard-inboard-and-sterndrive","title":"Moeller Marine Engine Spray Paint, Suzuki Shadow Black, Part No. 025804, 12 oz","description":"\u003cp\u003eMoeller Marine engine spray paint in Suzuki Shadow Black (Part No. 025804) is a color-matched touch-up and refinishing paint formulated specifically for the marine environment. It uses a heat and solvent resistant acrylic lacquer designed for the extended staying power that boat engines demand, standing up to the heat cycling, fuel splash, and weather exposure that ordinary spray paints cannot handle. The color is matched to the original Suzuki Shadow Black finish, making it suited for touch-ups, full repaints, and restoration work where matching the factory appearance matters.\u003c\/p\u003e\u003cp\u003eThis paint is intended for use on outboard and inboard engines, as well as stern drive and lower unit applications, giving it broad coverage across most powerhead and drive surfaces on a boat. Each can holds 12 oz of net product. It is packaged and sold as a single unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025804\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Suzuki Shadow Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Engine Spray Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 12 oz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Weight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 2.75 x 2.75 x 7.8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 8.0L x 4.0W x 4.0H inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729010952\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Outboard and inboard engines, stern drive and lower unit applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Moeller part number 025804?\u003c\/strong\u003e Moeller part number 025804 is Suzuki Shadow Black, a color matched to the original factory finish on Suzuki outboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint be used on inboard engines, or only outboards?\u003c\/strong\u003e Moeller 025804 Suzuki Shadow Black is formulated for use on both outboard and inboard engines, as well as stern drive and lower unit applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much paint is in each can of Moeller 025804?\u003c\/strong\u003e Each can contains 12 oz of net product and is sold as a single unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint heat resistant?\u003c\/strong\u003e Yes, Moeller 025804 uses a heat and solvent resistant acrylic lacquer formulated for the extended staying power that boat engines require.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the Moeller 025804 paint can as shipped?\u003c\/strong\u003e The Moeller Suzuki Shadow Black paint (part 025804) weighs 1 pound as packaged for shipping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Moeller 025804 spray can?\u003c\/strong\u003e The product itself measures 2.75 x 2.75 x 7.8 inches, and it ships in a package measuring 8.0L x 4.0W x 4.0H inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this match my Suzuki engine's original paint exactly?\u003c\/strong\u003e Moeller 025804 is color matched to the Suzuki Shadow Black factory finish, making it suited for touch-up or full repaint work where matching the original engine color matters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Moeller product?\u003c\/strong\u003e Yes, this is a genuine Moeller Marine product, part number 025804, in the Suzuki Shadow Black color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is this spray paint intended for?\u003c\/strong\u003e Moeller 025804 is intended for outboard and inboard engines, stern drive units, and lower unit applications on marine engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cans come in an order of Moeller 025804?\u003c\/strong\u003e Each order of Moeller 025804 Suzuki Shadow Black includes one 12 oz can, as the package quantity is 1.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991067209947,"sku":"MOE-025804","price":15.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41eOSdqdfEL.jpg?v=1784490759"},{"product_id":"moeller-025814-yamaha-blue-gray-marine-engine-paint-12-oz-acrylic-lacquer-spray","title":"Moeller 025814 Engine Paint, Yamaha Blue Gray, 12 oz Aerosol","description":"\u003cp\u003eMoeller 025814 is a Yamaha Blue Gray engine touch-up paint formulated specifically for the marine environment. It is designed for use on all outboard and inboard engines, stern drives, and lower unit applications, making it a versatile option for refinishing engine housings, powerheads, and drive components that have faded, chipped, or been scratched during routine maintenance. The paint uses a heat and solvent resistant acrylic lacquer formula built to withstand the extended exposure boat engines face from sun, moisture, and operating temperatures. A quick-dry formula allows for faster recoating and shorter downtime during a repaint job, while the oil and gasoline resistant finish holds up against the fuel and lubricant exposure common around engine compartments and lower units. The paint is packaged in a 12 oz can for straightforward spray application to full engine covers or smaller touch-up areas alike. Moeller 025814 matches the Yamaha Blue Gray color used on Yamaha outboard and inboard engine finishes, letting owners restore a factory-matched appearance rather than settling for a mismatched generic color. It is suited for boat owners, mechanics, and detailers who want a durable, color-matched refinish that resists the marine elements as well as the original factory coating.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025814\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\/Gray (Yamaha Blue Gray)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 12 oz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2.5 x 2.5 x 7.9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormula:\u003c\/strong\u003e Heat and solvent resistant acrylic lacquer, quick-dry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance:\u003c\/strong\u003e Oil and gasoline resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Outboard and inboard engines, stern drives, lower units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Moeller 025814?\u003c\/strong\u003e Moeller 025814 is a Yamaha Blue Gray color, matching the factory finish used on Yamaha outboard and inboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines can this paint be used on?\u003c\/strong\u003e Moeller 025814 is formulated for use on all outboard and inboard engines, as well as stern drives and lower unit applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much paint is in one can?\u003c\/strong\u003e Each can of Moeller 025814 contains 12 oz of engine paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint resistant to fuel and oil exposure?\u003c\/strong\u003e Yes, Moeller 025814 is formulated to be oil and gasoline resistant, which suits the fuel and lubricant exposure typical around marine engine compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does the paint take to dry?\u003c\/strong\u003e Moeller 025814 uses a quick-dry formula, allowing faster recoating and shorter downtime compared to standard paints.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of paint formula does Moeller 025814 use?\u003c\/strong\u003e It is a heat and solvent resistant acrylic lacquer, engineered to hold up under the temperature and chemical exposure boat engines experience.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a can of Moeller 025814 weigh?\u003c\/strong\u003e A can of Moeller 025814 weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the can?\u003c\/strong\u003e The Moeller 025814 can measures 2.5 x 2.5 x 7.9 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint be used for touch-ups as well as full repaints?\u003c\/strong\u003e Yes, the 12 oz spray can of Moeller 025814 works for both full engine housing repaints and smaller touch-up areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the can material made of?\u003c\/strong\u003e The Moeller 025814 paint can is made of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Moeller 025814 suitable for lower unit applications?\u003c\/strong\u003e Yes, Moeller 025814 is specifically formulated for lower unit applications in addition to outboard and inboard engines and stern drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Moeller 025814 come with any warranty?\u003c\/strong\u003e Moeller 025814 is backed by the manufacturer's standard warranty.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991067898075,"sku":"MOE-025814","price":14.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71mJI4Ok1aL_5b97dbd6-d354-4f1b-bd59-7d91916c2608.jpg?v=1784490761"},{"product_id":"moeller-marine-025805-engine-paint-suzuki-charcoal-metallic-12-oz-acrylic-lacquer","title":"Moeller Marine Engine Paint, Suzuki Charcoal Metallic, 12 oz Acrylic Lacquer","description":"\u003cp\u003eMoeller Marine engine paint in Suzuki Charcoal Metallic is a color-matched touch-up and refinish paint formulated for the marine environment. It is a heat and solvent resistant acrylic lacquer built for the extended staying power that boat engines need, and it is color matched to the original Suzuki Charcoal Metallic engine finish so touch-ups and full repaints blend in rather than standing out as an obvious patch. The paint is intended for use on all outboard and inboard engines, as well as stern drive and lower unit applications, making it a versatile choice for engine covers, powerheads, and lower unit housings that need to be restored to factory-correct color. It is applied to metal surfaces and is rated water resistant once cured, which suits the constant exposure to spray, humidity, and washdown that engine components see on the water. Each bottle holds 12 fluid ounces of paint and includes a brush for application, so it is ready to use straight out of the package without needing to source separate application tools. The finish is a metallic charcoal that reproduces the factory Suzuki engine color, and the acrylic lacquer formula is designed to resist the heat cycling and solvent exposure (fuel, oil, degreaser) that engine paint is regularly subjected to. This makes it a straightforward option for boat owners and shops doing engine refreshes, corrosion touch-ups, or full repaints who want a factory-matched result without custom color mixing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025805\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Charcoal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Type:\u003c\/strong\u003e Metallic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Volume:\u003c\/strong\u003e 12 Fluid Ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e Acrylic Lacquer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Use:\u003c\/strong\u003e Engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Recommendation:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Bottle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Brush\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor\/Outdoor Usage:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance Level:\u003c\/strong\u003e Water Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729010969\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFor use on all outboard and inboard engines, stern drive and lower unit applications; color matched to Suzuki Charcoal Metallic engine finish.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Moeller part number 025805?\u003c\/strong\u003e Moeller 025805 is Suzuki Charcoal Metallic, a metallic charcoal paint color matched to the original Suzuki engine finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much paint is in one bottle of the 025805 Suzuki Charcoal Metallic paint?\u003c\/strong\u003e Each bottle contains 12 fluid ounces of paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a brush included with this engine paint?\u003c\/strong\u003e Yes, a brush is included with Moeller 025805 for application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of paint is Moeller 025805?\u003c\/strong\u003e It is an acrylic lacquer paint, formulated to be heat and solvent resistant for the demands of a boat engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is Moeller 025805 designed for?\u003c\/strong\u003e This paint is recommended for use on metal surfaces, specifically engine components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint be used on both outboard and inboard engines?\u003c\/strong\u003e Yes, Moeller Suzuki Charcoal Metallic paint (025805) is intended for use on all outboard and inboard engines, as well as stern drive and lower unit applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 025805 Charcoal Metallic paint water resistant?\u003c\/strong\u003e Yes, this Moeller engine paint is rated water resistant once applied.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a bottle of Moeller 025805 weigh?\u003c\/strong\u003e The packaged product weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for Moeller Suzuki Charcoal Metallic paint?\u003c\/strong\u003e The UPC for Moeller part number 025805 is 739729010969.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an indoor or outdoor use paint?\u003c\/strong\u003e Moeller 025805 is designated for outdoor usage, consistent with marine engine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I use a color-matched paint instead of a generic engine paint?\u003c\/strong\u003e Moeller 025805 is formulated to match the original Suzuki Charcoal Metallic engine color, so touch-ups or repaints blend with the factory finish rather than creating a visible mismatch.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991068094683,"sku":"MOE-025805","price":15.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/21CA69k_SKL.jpg?v=1784490761"},{"product_id":"moeller-volvo-engine-spray-paint-metallic-silver-12-oz-aerosol-touch-up-mpn-025818","title":"Moeller Marine Volvo Metallic Silver Engine Spray Paint 025818, 12 oz","description":"\u003cp\u003eMoeller 025818 is a metallic silver engine spray paint formulated for touching up and refinishing Volvo Penta marine engines. It comes in a 12 ounce can and is designed to restore a factory-match silver finish to engine blocks and components that have faded, scratched, or corroded from heat and marine use. The metallic silver color matches the appearance of Volvo Penta engine paint, making it a straightforward choice for owners who want a clean, uniform look after maintenance work, part swaps, or touch-up repairs.\u003c\/p\u003e\u003cp\u003eThe compact can format makes it easy to store aboard or in a garage shop and apply directly to prepped engine surfaces. As with any engine paint, best results come from cleaning and prepping the surface before application. Moeller 025818 is manufactured in the United States.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025818\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Engine Spray Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Metallic Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 12 ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 7.8 x 2.65 x 2.65 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729013663\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolvo Penta marine engines (color-matched metallic silver finish)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Moeller 025818 engine paint?\u003c\/strong\u003e Moeller 025818 is a metallic silver engine spray paint, formulated to match the factory finish on Volvo Penta marine engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much paint is in one can of Moeller 025818?\u003c\/strong\u003e Each can of Moeller 025818 holds 12 ounces of metallic silver engine paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint made for Volvo Penta engines?\u003c\/strong\u003e Yes, Moeller 025818 is a Volvo metallic silver color match intended for touching up Volvo Penta marine engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a can of Moeller 025818 weigh?\u003c\/strong\u003e A can of Moeller 025818 weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of Moeller 025818?\u003c\/strong\u003e The Moeller 025818 can measures 7.8 x 2.65 x 2.65 inches in its package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Moeller 025818 a spray-on paint?\u003c\/strong\u003e Moeller 025818 is categorized as an engine spray paint, packaged in a 12 ounce can for direct application to engine surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is Moeller 025818 made?\u003c\/strong\u003e Moeller 025818 engine paint is manufactured in the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for Moeller 025818?\u003c\/strong\u003e The UPC for Moeller 025818 metallic silver engine paint is 739729013663.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Moeller 025818 be used to touch up scratches or worn spots on an engine?\u003c\/strong\u003e Moeller 025818 metallic silver paint is designed for touching up and refinishing Volvo Penta engine surfaces that have faded or been scratched.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Moeller 025818 a genuine Moeller product?\u003c\/strong\u003e Yes, part number 025818 is a genuine Moeller-branded engine paint, not a generic substitute.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991072518363,"sku":"MOE-025818","price":15.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51cE8c5P3lL.jpg?v=1784490776"},{"product_id":"moeller-025815-volvo-hs-engine-red-spray-paint-12-oz-heat-resistant-acrylic-lacquer","title":"Moeller 025815 Volvo HS Engine Red Spray Paint, 12 oz Heat-Resistant Acrylic Lacquer","description":"\u003cp\u003eMoeller 025815 is a 12 oz aerosol can of Volvo HS Engine Red spray paint, formulated as a heat and solvent resistant acrylic lacquer built for the demands of marine engine surfaces. This red touch-up and refinishing paint is designed for use on outboard engines, inboard engines, and stern drive lower unit applications, giving boat owners a way to restore factory-correct color and protect engine components from heat, fuel, and solvent exposure. The acrylic lacquer formula is engineered for the extended staying power that boat engines require, standing up to the heat cycling and chemical exposure typical of engine compartments and lower units. Packaged in a convenient spray can for even, even coverage without brush marks, Moeller 025815 is a practical choice for engine maintenance, corrosion touch-up, and cosmetic refinishing on Volvo-red engine components. Each can delivers 12 fluid ounces of coating, enough for touch-up work or a full refresh on smaller engine parts and lower unit housings.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025815\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 12 ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e Acrylic lacquer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Heat resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Can (aerosol spray)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Moeller 025815 used for?\u003c\/strong\u003e Moeller 025815 is a 12 oz can of Volvo HS Engine Red spray paint used to touch up or refinish marine engine surfaces, restoring factory-correct red color on engine components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint heat resistant?\u003c\/strong\u003e Yes, Moeller 025815 is a heat and solvent resistant acrylic lacquer formulated for the heat cycling that boat engines experience during operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines can this paint be used on?\u003c\/strong\u003e Moeller 025815 is designed for use on outboard engines, inboard engines, and stern drive lower unit applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much paint is in each can?\u003c\/strong\u003e Each can of Moeller 025815 contains 12 fluid ounces of red engine spray paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Moeller 025815?\u003c\/strong\u003e Moeller 025815 is Volvo HS Engine Red, matching the red color used on Volvo engine components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of paint formula does Moeller 025815 use?\u003c\/strong\u003e It is an acrylic lacquer formula, chosen for its staying power against the heat and solvent exposure found in marine engine compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the paint applied?\u003c\/strong\u003e Moeller 025815 comes in an aerosol spray can, allowing direct application without brushes or additional equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a can of Moeller 025815 weigh?\u003c\/strong\u003e A can of Moeller 025815 weighs 1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is Moeller 025815 manufactured?\u003c\/strong\u003e Moeller 025815 spray paint is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint be used on lower unit housings?\u003c\/strong\u003e Yes, Moeller 025815 is formulated for stern drive lower unit applications in addition to outboard and inboard engine surfaces.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991074025691,"sku":"MOE-025815","price":21.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61OZUdSZpwL.jpg?v=1784490781"},{"product_id":"moeller-olive-drab-camo-marine-engine-spray-paint-12-oz-mpn-025900","title":"Moeller Color Vision Engine Spray Paint, Olive Drab Camo, 12 oz, Heat Resistant to 250 Degrees","description":"\u003cp\u003eMoeller Color Vision paint in Olive Drab Camo is a quick-dry spray paint formulated specifically for the marine environment, designed to color-match your engine to its original factory finish. It is approved for use on all outboard and inboard engines, as well as stern drive and lower unit applications, making it a versatile touch-up and refinish option for a wide range of marine powerheads and drive components. The paint is rated for continuous exposure up to 250 degrees, so it holds up to the heat generated around engine blocks, manifolds, and drive housings without discoloring or breaking down. Its quick-dry formula speeds up touch-up jobs and reduces dust-nib contamination during application, while its oil and gasoline resistant finish stands up to the fuel and oil exposure common in engine bays and lower unit housings. Packaged in a 12 oz spray can for even, controlled coverage, Moeller Color Vision paint is a straightforward way to refresh corroded, chipped, or faded engine paint and restore a clean, factory-correct appearance to outboard powerheads, inboard engines, stern drives, and lower units.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 025900\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Olive Drab Camo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 12 ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Temperature Rating:\u003c\/strong\u003e 250 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729011676\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00739729011676\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Outboard and inboard engines, stern drive and lower unit applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance:\u003c\/strong\u003e Oil and gasoline resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Time:\u003c\/strong\u003e Quick-dry formula\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Moeller part number 025900?\u003c\/strong\u003e Moeller part number 025900 is Olive Drab Camo, formulated to color-match engines finished in that original color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint be used on both outboard and inboard engines?\u003c\/strong\u003e Yes, Moeller Color Vision Olive Drab Camo paint (025900) is approved for use on all outboard and inboard engines, as well as stern drive and lower unit applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much heat can this paint withstand?\u003c\/strong\u003e Moeller 025900 Olive Drab Camo paint is approved for use up to 250 degrees, making it suitable for engine surfaces that run hot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is the spray can?\u003c\/strong\u003e The Moeller 025900 Olive Drab Camo paint comes in a 12 ounce spray can.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this can of paint weigh?\u003c\/strong\u003e The Moeller 025900 Olive Drab Camo spray paint weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint resistant to oil and gasoline exposure?\u003c\/strong\u003e Yes, Moeller 025900 Olive Drab Camo paint is oil and gasoline resistant, which suits it to engine bay and lower unit environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this paint dry quickly?\u003c\/strong\u003e Moeller 025900 Olive Drab Camo uses a quick-dry formula, reducing wait time between coats and handling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for Moeller part 025900?\u003c\/strong\u003e The UPC for Moeller Color Vision Olive Drab Camo paint, part number 025900, is 739729011676.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint made specifically for marine use?\u003c\/strong\u003e Yes, Moeller 025900 Olive Drab Camo paint is formulated for the marine environment rather than being a general-purpose spray paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this to touch up a lower unit housing?\u003c\/strong\u003e Yes, Moeller 025900 Olive Drab Camo paint is approved for lower unit applications in addition to outboard and inboard engine surfaces and stern drives.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991235309787,"sku":"MOE-025900","price":12.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Color-Vision__88980.1722375115.500.750.jpg?v=1785189026"},{"product_id":"pettit-120-brushing-thinner-quart-marine-paint-and-coating-thinner","title":"Pettit Brushing Thinner 120, Quart, Part Number 11212008","description":"\u003cp\u003ePettit Brushing Thinner 120 (part number 11212008) is a quart-size thinner used for surface cleaning and prep work on fiberglass hulls. It is specified as a cleaning agent during hull blister repair procedures, where the surface is wiped down with Pettit 120 Brushing Thinner after sanding to remove residue before further prep steps, such as checking hull moisture content and applying an epoxy barrier coat. Using a dedicated cleaning thinner at this stage helps ensure the sanded surface is free of contaminants prior to subsequent coating work.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11212008\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Brushing Thinner #120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size:\u003c\/strong\u003e Quart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Thinners \u0026amp; Solvents\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469001572\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.15 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Pettit Brushing Thinner 120 used for?\u003c\/strong\u003e Pettit Brushing Thinner 120 (part number 11212008) is used to clean sanded fiberglass hull surfaces, such as during the cleaning step of a hull blister repair procedure before further prep work is performed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size container does part number 11212008 come in?\u003c\/strong\u003e Part number 11212008 is packaged in a quart-size container of Pettit Brushing Thinner 120.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does Pettit Brushing Thinner 120 weigh?\u003c\/strong\u003e The quart container of Pettit Brushing Thinner 120, part number 11212008, weighs 2.15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this thinner used before or after sanding a hull?\u003c\/strong\u003e It is used after sanding: the documented blister repair procedure calls for cleaning the sanded surface with Pettit 120 Brushing Thinner before proceeding to moisture checks and epoxy application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product category does part number 11212008 fall under?\u003c\/strong\u003e Pettit Brushing Thinner 120, part number 11212008, is categorized as a thinner and solvent product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Pettit Brushing Thinner 120 have a UPC code?\u003c\/strong\u003e Yes, the UPC for Pettit Brushing Thinner 120 (part number 11212008) is 725469001572.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Pettit Brushing Thinner 120 part of a hull blister repair process?\u003c\/strong\u003e Yes, cleaning the surface with Pettit 120 Brushing Thinner is listed as a step in a hull blister repair procedure, performed after sanding and before checking hull moisture content.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes after using Pettit Brushing Thinner 120 in a blister repair?\u003c\/strong\u003e After cleaning the surface with Pettit 120 Brushing Thinner, the documented procedure moves to checking the hull's moisture content with a moisture meter before further repair steps proceed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for the quart size of this thinner?\u003c\/strong\u003e The quart size of Pettit Brushing Thinner 120 has manufacturer part number 11212008.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":48991651004635,"sku":"PET-120Q","price":30.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/brushing-thinner-120__83124.1729948676.500.750.jpg?v=1785329136"},{"product_id":"pettit-epoxy-thinner-quart-solvent-for-epoxy-barrier-coats-and-primers-mpn-11209708","title":"Pettit Epoxy Thinner, Quart - Part 11209708 for Pettit Protect Two-Part Epoxy Systems","description":"\u003cp\u003ePettit Epoxy Thinner (Part 11209708) is a quart-size thinner formulated for use within the Pettit two-part epoxy coating system, including Pettit Protect topcoat, Pettit 6455\/044 Metal Primer, Pettit 6980 Rustlok Steel Primer, and Pettit 7050 EZ-Fair Epoxy Fairing Compound. It is intended for boat owners and professional applicators preparing and recoating keels and hulls with Pettit's epoxy products, helping maintain proper application consistency across primer, fairing, and topcoat stages.\u003c\/p\u003e\u003cp\u003eThe Pettit epoxy system this thinner supports covers multiple substrates. On lead keels, the surface is disc sanded or abraded to bright metal, coated with one thin coat of 6455\/044 Metal Primer, allowed to dry eight hours, then topcoated with Pettit Protect; if fairing is needed, Pettit 7050 EZ-Fair Epoxy Fairing Compound is applied, sanded with 80 grit sandpaper, and followed by two additional coats of Pettit Protect. On steel or cast iron keels, the surface is abraded to bright metal, coated with one coat of 6980 Rustlok Steel Primer (recoat window of only 1\/2 to 2 hours), then topcoated with Pettit Protect, with the same EZ-Fair and finish-coat sequence if fairing is required. Pettit Protect can also be applied over existing two-part epoxy finishes in sound condition after brush-off sandblasting or heavy 60 grit sanding, followed by three coats of Pettit Protect. This quart of thinner supports those application steps within the Pettit epoxy system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11209708\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Epoxy Thinner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Quart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Thinners \u0026amp; Solvents\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.35 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469001398\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsed With:\u003c\/strong\u003e Pettit Protect, Pettit 6455\/044 Metal Primer, Pettit 6980 Rustlok Steel Primer, Pettit 7050 EZ-Fair Epoxy Fairing Compound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Pettit Epoxy Thinner (Part 11209708) used for?\u003c\/strong\u003e It is a thinner formulated for use within the Pettit two-part epoxy coating system, supporting application of Pettit Protect topcoat, Pettit 6455\/044 Metal Primer, Pettit 6980 Rustlok Steel Primer, and Pettit 7050 EZ-Fair Epoxy Fairing Compound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size does Pettit Epoxy Thinner 11209708 come in?\u003c\/strong\u003e This product is sold in a one quart container.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a quart of Pettit Epoxy Thinner weigh?\u003c\/strong\u003e A quart of Pettit Epoxy Thinner, part 11209708, weighs 2.35 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this thinner be used on lead keels?\u003c\/strong\u003e Yes. In the Pettit lead keel process, the surface is disc sanded to bright metal, coated with 6455\/044 Metal Primer, and then topcoated with Pettit Protect, with this epoxy thinner supporting that application process.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this thinner be used on steel or cast iron keels?\u003c\/strong\u003e Yes. For steel or cast iron keels, the surface is abraded to bright metal and coated with 6980 Rustlok Steel Primer before topcoating with Pettit Protect, and this thinner supports that Pettit epoxy application process.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Pettit Epoxy Thinner compatible with Pettit Protect?\u003c\/strong\u003e Yes, Pettit Epoxy Thinner part 11209708 is intended for use with Pettit Protect, the two-part epoxy topcoat in the Pettit system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I apply this over an existing two-part epoxy finish?\u003c\/strong\u003e Pettit Protect may be applied over existing two-part epoxy finishes that are in sound condition, after brush-off sandblasting or heavy 60 grit sanding, and this thinner supports that recoat process.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long should I wait before recoating Rustlok Steel Primer with Pettit Protect?\u003c\/strong\u003e The recoat window for 6980 Rustlok Steel Primer before applying Pettit Protect is only 1\/2 to 2 hours, no more and no less.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product category does part 11209708 fall under?\u003c\/strong\u003e Pettit part 11209708, Epoxy Thinner, is categorized under Thinners \u0026amp; Solvents.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs fairing compound part of this same Pettit epoxy system?\u003c\/strong\u003e Yes, Pettit 7050 EZ-Fair Epoxy Fairing Compound is used within the same system as this thinner, applied and sanded smooth with 80 grit sandpaper before additional coats of Pettit Protect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for Pettit Epoxy Thinner, Quart?\u003c\/strong\u003e The UPC for this quart of Pettit Epoxy Thinner, part 11209708, is 725469001398.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":48991651201243,"sku":"PET-97Q","price":41.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/p_f90d2de7-424e-4ed5-8ecd-86e26f6661a0.jpg?v=1785347204"},{"product_id":"pettit-121-spraying-thinner-1-quart-mpn-11212108-marine-paint-and-coating-thinner","title":"Pettit Spraying Thinner #121, Quart, Marine Paint Thinner for Spray Application","description":"\u003cp\u003ePettit Spraying Thinner #121 is a marine-grade thinner formulated for reducing coatings to the proper viscosity for spray application. It is sold in a quart-size container and falls within Pettit's line of thinners and solvents used to prepare marine paints and finishes for spray equipment. As a spray-specific thinner, it is intended for use where a sprayer, rather than a brush or roller, is being used to apply the coating.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11212108\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Spraying Thinner #121\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size:\u003c\/strong\u003e Quart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Thinners \u0026amp; Solvents\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469001626\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Pettit Spraying Thinner #121 used for?\u003c\/strong\u003e It is used to thin marine coatings to the proper viscosity for application with spray equipment, part number 11212108.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size container does Pettit Spraying Thinner #121 come in?\u003c\/strong\u003e Pettit Spraying Thinner #121 is sold in a quart-size container.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a quart of Pettit Spraying Thinner #121 weigh?\u003c\/strong\u003e The quart container of Pettit Spraying Thinner #121 weighs 2.15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this thinner made for spray application or brushing?\u003c\/strong\u003e Pettit Spraying Thinner #121 is formulated specifically for spray application rather than brush application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes this thinner?\u003c\/strong\u003e This thinner is made by Pettit, part number 11212108.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is Pettit Spraying Thinner #121?\u003c\/strong\u003e It is classified under Thinners \u0026amp; Solvents in Pettit's marine coatings lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this product?\u003c\/strong\u003e The Pettit Spraying Thinner #121 quart carries manufacturer part number 11212108.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for Pettit Spraying Thinner #121?\u003c\/strong\u003e The UPC for the quart-size Pettit Spraying Thinner #121 is 725469001626.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":48991651365083,"sku":"PET-121Q","price":31.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/spraying-thinner-121__21521.1737896562.500.750.jpg?v=1785329138"},{"product_id":"pettit-eco-hrt-ablative-antifouling-bottom-paint-pontoon-grey-gallon-mpn-1130006","title":"Pettit Protect Grey Gallon Corrosion Protection Primer for Underwater Metals, Aluminum and Steel Hulls","description":"\u003cp\u003ePettit Protect is a corrosion protection primer engineered for underwater metals, including bare steel, bare aluminum, and lead keels. It is supplied in a 1 gallon container in grey. Pettit Protect also functions as an excellent primer for corrosion protection on all underwater metals, and when combined with Aluma Protect it forms a complete corrosion protection system for aluminum hulls, from pontoon boats to superyachts.\u003c\/p\u003e\u003cp\u003eSurface preparation depends on the substrate. For bare steel, sandblast to SSPC-SP 6 commercial blast, blow off residue with clean compressed air, and immediately apply three coats of Pettit Protect, or hand sand with 80 grit sandpaper (or power hand tool), remove residue, apply one coat of Pettit 6980 Rustlok Steel Primer, let it reach a tack-free state, then apply three coats of Pettit Protect within 2 hours of the Rustlok Primer application. For bare aluminum, sandblast with non-metallic media or disc sand to clean bright metal, wipe clean, apply one thin coat of Pettit 6455\/044 Metal Primer, let dry a minimum of 8 hours (maximum 48 hours), then apply three coats of Pettit Protect. For lead keels, disc sand or abrade to bright metal, clean off residue, apply one thin coat of 6455\/044 Metal Primer, let dry 8 hours, then apply one coat of Pettit Protect.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1130006\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size:\u003c\/strong\u003e 1 gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469029484\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Substrates:\u003c\/strong\u003e Bare steel, bare aluminum, lead keels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Coats:\u003c\/strong\u003e Three coats of Pettit Protect over primed metal (one coat over primed lead keels)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompanion Steel Primer:\u003c\/strong\u003e Pettit 6980 Rustlok Steel Primer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompanion Metal Primer:\u003c\/strong\u003e Pettit 6455\/044 Metal Primer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompanion Aluminum Hull Product:\u003c\/strong\u003e Aluma Protect\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Pettit Protect used for?\u003c\/strong\u003e Pettit Protect (part number 1130006) is a corrosion protection primer applied to underwater metals such as bare steel, bare aluminum, and lead keels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this product work on aluminum pontoon hulls?\u003c\/strong\u003e Yes, Pettit Protect is suitable for aluminum hulls, and when combined with Aluma Protect it provides a complete corrosion protection system for aluminum hulls ranging from pontoon boats to superyachts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and size does Pettit Protect 1130006 come in?\u003c\/strong\u003e This item is grey and supplied in a 1 gallon container.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a gallon of Pettit Protect weigh?\u003c\/strong\u003e A gallon of Pettit Protect (1130006) weighs 12.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many coats of Pettit Protect should I apply over bare steel?\u003c\/strong\u003e Three coats of Pettit Protect should be applied after priming, following the application and recoat instructions for the product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a primer before applying Pettit Protect to bare aluminum?\u003c\/strong\u003e Yes, one thin coat of Pettit 6455\/044 Metal Primer should be applied to bare aluminum first, allowed to dry a minimum of 8 hours and a maximum of 48 hours, before applying three coats of Pettit Protect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat primer is used on bare steel before Pettit Protect?\u003c\/strong\u003e Bare steel should first receive one coat of Pettit 6980 Rustlok Steel Primer, which must reach a tack-free state (typically 30 minutes to 2 hours depending on temperature) before three coats of Pettit Protect are applied within 2 hours of the primer coat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should bare steel be prepared before priming with Pettit Protect?\u003c\/strong\u003e Sandblast bare steel to SSPC-SP 6 commercial blast and blow off residue with clean compressed air, or hand sand with 80 grit sandpaper or a power hand tool and remove residue with clean compressed air or vacuuming, before applying Pettit 6980 Rustlok Steel Primer and then Pettit Protect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Pettit Protect be used on lead keels?\u003c\/strong\u003e Yes, lead keels should be disc sanded or abraded to bright metal, cleaned of residue, primed with one thin coat of 6455\/044 Metal Primer, dried 8 hours, then finished with one coat of Pettit Protect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surface preparation does bare aluminum need before this primer?\u003c\/strong\u003e Bare aluminum should be sandblasted with non-metallic media or disc sanded to clean, bright metal and wiped free of residue before the 6455\/044 Metal Primer and Pettit Protect are applied.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum drying time for the aluminum metal primer before applying Pettit Protect?\u003c\/strong\u003e The Pettit 6455\/044 Metal Primer used under Pettit Protect on aluminum must dry a minimum of 8 hours and a maximum of 48 hours before the topcoats are applied.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":48991655067867,"sku":"PET-1300G","price":248.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/p_6429431c-0849-43ba-b2b8-bc987370fd6c.jpg?v=1785347226"},{"product_id":"interlux-schooner-varnish-quart-high-gloss-marine-varnish-with-uv-filters-for-interior-and-exterior-wood-and-teak-mpn-5507935","title":"Interlux Schooner Varnish, Quart - High-Gloss Marine Varnish with UV Filters for Interior and Exterior Wood and Teak (MPN 5507935)","description":"\u003cp\u003eInterlux Schooner Varnish combines classic varnish craftsmanship with modern coating technology to deliver a bright, clear, high-gloss finish that lets the natural color of the wood show through. Built-in ultra-violet filters screen the sun's damaging rays for remarkable durability and excellent water resistance, while the silky application makes it a pleasure to brush. The traditional golden color gives interior and exterior woodwork a warm, hand-finished look that lasts season after season.\u003c\/p\u003e\u003cp\u003eSchooner is suitable for all internal and external woods and can be applied directly to oily timber such as teak. For a deep, mirror-like build, apply multiple coats, sanding lightly between each with 220-320 grit wet-or-dry sandpaper and removing sanding residue before recoating.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Interlux\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 5507935\u003c\/li\u003e\n\u003cli\u003eProduct: Schooner Varnish\u003c\/li\u003e\n\u003cli\u003eSize: 1 Quart (32 fl oz)\u003c\/li\u003e\n\u003cli\u003eFinish: High-Gloss\u003c\/li\u003e\n\u003cli\u003eColor: Traditional golden \/ clear\u003c\/li\u003e\n\u003cli\u003eBase: Polyurethane (PU)\u003c\/li\u003e\n\u003cli\u003eForm: Liquid\u003c\/li\u003e\n\u003cli\u003eCoverage: 600 sq ft\/gal by brush, 480 sq ft\/gal by spray\u003c\/li\u003e\n\u003cli\u003eCompatible material: Wood, including oily timber such as teak\u003c\/li\u003e\n\u003cli\u003eRecommended uses: Interior and exterior\u003c\/li\u003e\n\u003cli\u003eFlash point: 51 degrees C\u003c\/li\u003e\n\u003cli\u003eWeight: 2.2 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 081948400961\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSand between coats with 220-320 grit wet-or-dry sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove sanding residue with a cloth dampened with the proper solvent before recoating.\u003c\/li\u003e\n\u003cli\u003eApply multiple coats to build a durable, high-gloss film.\u003c\/li\u003e\n\u003cli\u003eCan be used in a system with a compatible clear wood sealer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Interlux Schooner Varnish used for?\u003c\/strong\u003e Schooner Varnish is a high-gloss marine varnish for finishing and protecting interior and exterior wood. It delivers a bright, clear finish with a traditional golden color that shows off the natural grain of the wood.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Schooner Varnish be applied over teak and other oily woods?\u003c\/strong\u003e Yes. Schooner is suitable for all internal and external woods and can be applied directly to oily timber such as teak.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this varnish protect against sun damage?\u003c\/strong\u003e Yes. Schooner contains ultra-violet filters that screen the sun's damaging rays, giving the finish remarkable durability and excellent water resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of finish does it produce?\u003c\/strong\u003e It produces a bright, clear, high-gloss finish with a traditional golden color that lets the natural color of the wood show through.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much area does one quart cover?\u003c\/strong\u003e Coverage is approximately 600 square feet per gallon by brush and 480 square feet per gallon by spray, so a quart covers roughly a quarter of that area per coat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should I sand between coats?\u003c\/strong\u003e Sand lightly between coats using 220-320 grit wet-or-dry sandpaper, then remove all sanding residue with a cloth dampened with the proper solvent before applying the next coat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many coats should I apply?\u003c\/strong\u003e Apply multiple coats to build a durable, high-gloss film, sanding between each coat. Additional coats increase depth, gloss, and long-term protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the base of this varnish?\u003c\/strong\u003e Schooner Varnish is a polyurethane (PU) based liquid coating formulated for marine and general wood finishing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be used with a wood sealer?\u003c\/strong\u003e Yes. Schooner can be used as part of a system with a compatible clear wood sealer for improved adhesion and finish on bare wood.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Schooner Varnish suitable for both indoor and outdoor projects?\u003c\/strong\u003e Yes. It is recommended for both interior and exterior use, making it suitable for brightwork, trim, cabinetry, and exposed exterior woodwork.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this container?\u003c\/strong\u003e This is a 1 quart (32 fluid ounce) container.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flash point?\u003c\/strong\u003e The flash point is 51 degrees C. Store and use in a well-ventilated area away from heat and open flame.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"Default Title","offer_id":48991678136539,"sku":"ILX-Y96Q","price":48.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Interlux-Schooner__28804.1737832000.500.750.jpg?v=1785188125"},{"product_id":"interlux-goldspar-satin-varnish-quart-low-gloss-satin-finish-for-marine-wood-and-brightwork","title":"Interlux Goldspar Satin Varnish, Quart - Low-Gloss Satin Finish for Marine Wood and Brightwork","description":"\u003cp\u003eInterlux Goldspar Satin Varnish delivers a warm, low-sheen satin finish that protects and beautifies interior and exterior wood. Formulated for marine brightwork, trim, and cabinetry, it brings out the natural depth of the grain while providing a durable, non-glare surface that stands up to sun and weather.\u003c\/p\u003e\u003cp\u003eEach quart covers approximately 62.5 to 75 square feet, making it ideal for building a professional multi-coat satin system over bare wood, epoxy, or previously varnished surfaces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Interlux\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5507930\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Goldspar Satin Varnish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Satin (low gloss)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm:\u003c\/strong\u003e Liquid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume:\u003c\/strong\u003e 1 Quart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 62.5 to 75 sq ft per quart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Material:\u003c\/strong\u003e Wood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081948400602\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eWet sand the surface with 120-150 grit wet-or-dry sandpaper and remove sanding residue by wiping with a clean, solvent-dampened rag, working small areas at a time and changing rags frequently. Apply multiple coats, sanding lightly between coats with 220-320 grit wet-or-dry sandpaper and removing all residue before recoating. When applying over Epiglass or other clear epoxy resin, allow the epoxy to fully cure a minimum of 3 to 7 days before varnishing.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of finish does Goldspar Satin Varnish produce?\u003c\/strong\u003e It produces a low-gloss satin finish that reduces glare while enhancing the natural depth and color of the wood grain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much area does one quart cover?\u003c\/strong\u003e One quart covers approximately 62.5 to 75 square feet per coat, depending on the porosity of the surface and application method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces can this varnish be used on?\u003c\/strong\u003e It is designed for wood surfaces, including marine brightwork, trim, and cabinetry, and can be applied over bare wood, cured epoxy, or previously varnished surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many coats should I apply?\u003c\/strong\u003e Build multiple coats for full protection and depth, sanding lightly between each coat to ensure proper adhesion and a smooth final finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat grit sandpaper should I use between coats?\u003c\/strong\u003e Sand between coats with 220-320 grit wet-or-dry sandpaper, then remove all sanding residue before applying the next coat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I prepare the surface before the first coat?\u003c\/strong\u003e Wet sand the surface with 120-150 grit wet-or-dry sandpaper and remove residue by wiping with a clean, solvent-dampened rag, working small areas at a time and changing rags frequently.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I apply this varnish over epoxy?\u003c\/strong\u003e Yes. When applying over Epiglass or other clear epoxy resin, allow the epoxy to fully cure for a minimum of 3 to 7 days before varnishing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy should I remove sanding residue before recoating?\u003c\/strong\u003e Sanding alone will not remove surface contamination, so wiping with a solvent-dampened cloth is necessary to ensure each coat bonds properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this varnish suitable for both interior and exterior wood?\u003c\/strong\u003e Yes, it is formulated to protect and beautify both interior and exterior wood surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat volume does this product come in?\u003c\/strong\u003e This product is supplied in a one-quart container.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the satin finish reduce glare?\u003c\/strong\u003e Yes, the satin sheen minimizes glare compared to a high-gloss varnish while still providing durable protection.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"Default Title","offer_id":48991678267611,"sku":"ILX-60","price":42.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/GoldsparSatin_1Q__51109.1739458526.500.750.jpg?v=1785188332"},{"product_id":"pettit-ez-wood-sealer-2018-clear-wood-sealer-quart-brightwork-base-coat-for-marine-varnish-systems","title":"Pettit EZ-Wood Sealer 2018, Quart Clear Wood Sealer for Varnish Prep","description":"\u003cp\u003ePettit EZ-Wood Sealer 2018 is a clear wood sealer formulated for use on bare or sanded wood surfaces prior to varnishing. It is applied after surface sanding to seal the wood grain and create a stable, even base for subsequent coats of varnish, helping the final varnish finish lay down smoothly and adhere properly. This product comes in a quart size and has a clear, liquid form for easy brush or roller application.\u003c\/p\u003e\u003cp\u003eIn use, EZ-Wood Sealer 2018 is applied in 1 to 2 coats following surface preparation: sanding with 180 to 220-grit sandpaper, cleaning of sanding residue with a tack rag, vacuum, air hose, or Brushing Thinner 120, and allowing the sealer to dry per product requirements before sanding thoroughly with 220-grit sandpaper and moving on to varnish application. The resin-based formula is compatible with wood surfaces and is designed as a preparatory step in a full varnish system rather than a standalone topcoat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1201808\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Ez-Wood Sealer Qt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Marine Primers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 32 fluid ounces (1 quart)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Liquid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Resin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Material:\u003c\/strong\u003e Wood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4.25 x 4.25 x 4.88 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469003415\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Pettit EZ-Wood Sealer 2018 used for?\u003c\/strong\u003e It is a clear wood sealer applied to bare or sanded wood before varnishing, sealing the grain and giving subsequent varnish coats a stable, even surface to bond to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many coats of EZ-Wood Sealer 2018 should I apply?\u003c\/strong\u003e Pettit recommends applying 1 to 2 coats of EZ-Wood Sealer 2018 according to the product directions before allowing it to dry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to sand before applying this sealer?\u003c\/strong\u003e Yes. The surface should first be sanded with 180 to 220-grit sandpaper and cleaned of sanding residue with a tack rag, vacuum, air hose, or Brushing Thinner 120 before applying Pettit EZ-Wood Sealer 2018.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat do I do after the sealer dries?\u003c\/strong\u003e After Pettit EZ-Wood Sealer 2018 has dried per the product requirements, sand thoroughly with 220-grit sandpaper before moving on to varnish application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size container does this come in?\u003c\/strong\u003e Pettit EZ-Wood Sealer 2018 is sold in a quart size, equal to 32 fluid ounces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is EZ-Wood Sealer 2018 made from?\u003c\/strong\u003e This sealer is resin-based and formulated for compatibility with wood surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the sealer?\u003c\/strong\u003e Pettit EZ-Wood Sealer 2018 is clear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this sealer be applied by brush?\u003c\/strong\u003e Yes, EZ-Wood Sealer 2018 can be applied by brush as part of the wood preparation process ahead of varnishing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a quart of EZ-Wood Sealer 2018 weigh?\u003c\/strong\u003e A quart container of Pettit EZ-Wood Sealer 2018 weighs 2.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs EZ-Wood Sealer 2018 a standalone finish?\u003c\/strong\u003e No, it is a sealer intended to be used as a preparatory step before applying varnish, not as a final protective topcoat on its own.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":48991679152347,"sku":"PET-2018Q","price":41.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/415fqlqK4yL.jpg?v=1784509738"},{"product_id":"interlux-bilgekote-gray-quart-fast-drying-oil-based-bilge-and-locker-paint-32-fl-oz","title":"Interlux Bilgekote Gray Quart - Fast-Drying Oil-Based Bilge and Locker Paint (32 fl oz)","description":"\u003cp\u003eBilgekote in Gray is a highly durable bilge and interior finish built to stand up to the harshest working spaces aboard your boat. This fast-drying, oil-based coating withstands oils and chemicals, knocks and scrapes, making it equally effective in lockers, on bulkheads, and throughout the bilge. One quart covers up to 100 square feet, giving you a tough, easy-to-clean surface that brightens dark interior spaces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Interlux\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 5509636\u003c\/li\u003e\n\u003cli\u003eColor: Gray\u003c\/li\u003e\n\u003cli\u003eFinish: Gloss\u003c\/li\u003e\n\u003cli\u003ePaint Type: Oil-based\u003c\/li\u003e\n\u003cli\u003eItem Form: Liquid\u003c\/li\u003e\n\u003cli\u003eSize: 32 fl oz (1 quart)\u003c\/li\u003e\n\u003cli\u003eCoverage: Up to 100 sq ft\u003c\/li\u003e\n\u003cli\u003eSpecial Feature: Fast-drying\u003c\/li\u003e\n\u003cli\u003eWeight: 2.5 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 081948408639\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePreparation and Application\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemove all oil and grease from the bilges before painting.\u003c\/li\u003e\n\u003cli\u003eSand with 220-grit sandpaper; if the surface is in poor condition, sand with 80-grit.\u003c\/li\u003e\n\u003cli\u003eIf previously painted, remove all old, flaky paint and make sure the area is completely dry.\u003c\/li\u003e\n\u003cli\u003eClean thoroughly with an appropriate fiberglass solvent wash, surface prep, or special thinner.\u003c\/li\u003e\n\u003cli\u003eApply two coats for a highly durable finish.\u003c\/li\u003e\n\u003cli\u003eNever apply direct from the can, as this can introduce contamination.\u003c\/li\u003e\n\u003cli\u003eUse top-quality fine line masking tape for crisp, clean lines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this Bilgekote paint?\u003c\/strong\u003e This Bilgekote is Gray, a clean, light shade that brightens dark bilges, lockers, and interior spaces while hiding grime between cleanings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much area does one quart cover?\u003c\/strong\u003e One quart covers up to 100 square feet, depending on surface texture and porosity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of paint is Bilgekote?\u003c\/strong\u003e Bilgekote is a fast-drying, oil-based liquid coating formulated as a highly durable finish for bilges, lockers, and bulkheads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Bilgekote withstand oils and chemicals?\u003c\/strong\u003e Yes. Bilgekote is designed to withstand oils and chemicals as well as knocks and scrapes, making it well suited to hard-working interior spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I prepare the surface before painting?\u003c\/strong\u003e Remove all oil and grease, then sand with 220-grit sandpaper. If the surface is in poor condition, sand with 80-grit. Clean thoroughly and make sure the area is completely dry before painting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat do I do if the bilge was painted before?\u003c\/strong\u003e Remove all old, flaky paint and make sure the area to be painted is completely dry, then clean thoroughly before applying new coats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many coats should I apply?\u003c\/strong\u003e Apply two coats for a highly durable finish that resists oils, chemicals, knocks, and scrapes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I apply Bilgekote straight from the can?\u003c\/strong\u003e No. Never apply direct from the can, as this can introduce contamination. Decant the paint before applying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does Bilgekote have?\u003c\/strong\u003e Bilgekote dries to a gloss finish that is durable and easy to keep clean.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can Bilgekote be used?\u003c\/strong\u003e It is equally effective in bilges, lockers, and on bulkheads, and works on wood and fiberglass interior surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I get clean paint lines?\u003c\/strong\u003e Use top-quality fine line masking tape to ensure good, crisp lines along edges and adjacent surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Bilgekote fast-drying?\u003c\/strong\u003e Yes, it is a fast-drying formula that helps you complete a two-coat application efficiently.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"Default Title","offer_id":48991679643867,"sku":"ILX-YMA100","price":42.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51zd3SLIGUL.jpg?v=1784509754"},{"product_id":"pettit-ez-fabricoat-aerosol-gloss-black-fabric-and-carpet-coating-mpn-1300120","title":"Pettit EZ-Fabricoat Aerosol Gloss Black Carpet Coating, Part Number 1300120","description":"\u003cp\u003eThe Pettit EZ-Fabricoat Aerosol Gloss Black (part number 1300120) is a gloss black aerosol coating formulated for carpet. It is packaged as a spray-on aerosol for straightforward, even application without brushes or rollers, making it a convenient option for touching up or refreshing carpet color. The product has a net weight of 2 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1300120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e EZ-Fabricoat Aerosol Gloss Black 3001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Aerosol spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Carpet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469030022\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Pettit EZ-Fabricoat Aerosol Gloss Black used for?\u003c\/strong\u003e It is a gloss black aerosol coating for carpet, part number 1300120 from Pettit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does part number 1300120 have?\u003c\/strong\u003e A gloss finish in black, applied as an aerosol spray coating for carpet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the EZ-Fabricoat Aerosol Gloss Black applied?\u003c\/strong\u003e It comes in an aerosol spray can, so it is applied by spraying directly onto the carpet surface without a brush or roller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Pettit EZ-Fabricoat Aerosol Gloss Black weigh?\u003c\/strong\u003e The product weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for Pettit part number 1300120?\u003c\/strong\u003e The UPC for the EZ-Fabricoat Aerosol Gloss Black 3001 is 725469030022.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this Pettit aerosol coating?\u003c\/strong\u003e Black, in a gloss finish, is the color of the EZ-Fabricoat Aerosol Gloss Black 3001.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the EZ-Fabricoat Aerosol Gloss Black a genuine Pettit product?\u003c\/strong\u003e Yes, it is manufactured by Pettit under part number 1300120.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is part number 1300120?\u003c\/strong\u003e It is listed as a carpet product, specifically a gloss black aerosol coating.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":48991679742171,"sku":"PET-3001","price":31.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/p_e4bae306-96a7-4965-abaf-e564ea39e0c3.jpg?v=1785347193"},{"product_id":"interlux-bilgekote-white-quart-durable-oil-based-bilge-locker-and-bulkhead-paint-5509652","title":"Interlux Bilgekote White Quart - Durable Oil-Based Bilge, Locker and Bulkhead Paint (5509652)","description":"\u003cp\u003eBilgekote White is a tough, oil-based marine finish built for the hardest-working spaces on your boat. Formulated to withstand oils, chemicals, knocks and scrapes, it delivers a durable gloss coating that keeps bilges, lockers and bulkheads clean, bright and easy to maintain. The high-gloss white surface reflects light to brighten dark compartments and makes spotting leaks or debris far easier.\u003c\/p\u003e\u003cp\u003eChip resistant and waterproof, Bilgekote goes on as a liquid and cures to a hard, wipeable finish that stands up to years of service below deck. Two coats provide a highly durable, protective barrier that is equally effective in storage lockers and on interior bulkheads.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Interlux\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 5509652\u003c\/li\u003e\n\u003cli\u003eColor: White (gloss)\u003c\/li\u003e\n\u003cli\u003eFinish type: Gloss\u003c\/li\u003e\n\u003cli\u003ePaint type: Oil-based\u003c\/li\u003e\n\u003cli\u003eItem form: Liquid\u003c\/li\u003e\n\u003cli\u003eSize: 1 Quart\u003c\/li\u003e\n\u003cli\u003eCoverage: approximately 10.36 square meters per liter\u003c\/li\u003e\n\u003cli\u003eChip resistant and waterproof\u003c\/li\u003e\n\u003cli\u003eIndoor use, wood and fiberglass surfaces\u003c\/li\u003e\n\u003cli\u003eWeight: 2.9 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 081948408646\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemove all oil and grease from the bilges before painting.\u003c\/li\u003e\n\u003cli\u003eSand with 220-grit sandpaper; if the surface is in poor condition, sand with 80-grit.\u003c\/li\u003e\n\u003cli\u003eIf previously painted, remove all old, flaky paint and ensure the area is completely dry.\u003c\/li\u003e\n\u003cli\u003eClean thoroughly with an appropriate solvent wash, surface prep or thinner before coating.\u003c\/li\u003e\n\u003cli\u003eApply two coats for a highly durable finish. Never apply direct from the can to avoid introducing contamination.\u003c\/li\u003e\n\u003cli\u003eUse top quality fine line masking tape for crisp, clean lines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Bilgekote White used for?\u003c\/strong\u003e Bilgekote White is a durable oil-based marine paint designed for boat bilges, lockers and bulkheads. It provides a hard, protective gloss finish that withstands oils, chemicals, knocks and scrapes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish is this paint?\u003c\/strong\u003e This is a white paint with a gloss finish. The bright white color reflects light to brighten dark compartments and makes leaks or debris easy to spot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many coats should I apply?\u003c\/strong\u003e Apply two coats for the best durability. Never apply directly from the can, as this can introduce contamination into the finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I prepare the surface before painting?\u003c\/strong\u003e Remove all oil and grease first, then sand with 220-grit sandpaper. If the surface is in poor condition, sand with 80-grit. Clean thoroughly with a suitable solvent wash, surface prep or thinner, and make sure the area is completely dry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if the bilges have been painted before?\u003c\/strong\u003e Remove all old, flaky paint and ensure the area to be painted is completely dry before applying new coats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Bilgekote waterproof?\u003c\/strong\u003e Yes. It is waterproof and chip resistant, curing to a hard, wipeable finish that stands up to the demanding conditions found in bilges and lockers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this container?\u003c\/strong\u003e This is a 1 quart can of paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much area does a quart cover?\u003c\/strong\u003e Coverage is approximately 10.36 square meters per liter, depending on surface porosity and application method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint be used on both wood and fiberglass?\u003c\/strong\u003e Yes. It is suitable for wood and fiberglass surfaces. When painting fiberglass, evaluate whether any anti-osmosis treatment is needed before coating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it resistant to chemicals and oils?\u003c\/strong\u003e Yes. Bilgekote is formulated to withstand oils and chemicals as well as knocks and scrapes, making it well suited to bilges and storage lockers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of masking tape should I use?\u003c\/strong\u003e Always use top quality fine line masking tape to ensure good, crisp paint lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint for indoor or outdoor boat areas?\u003c\/strong\u003e It is intended for interior boat spaces such as bilges, lockers and bulkheads, all located above the waterline.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"Default Title","offer_id":48991679938779,"sku":"ILX-YMA102","price":42.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51zd3SLIGUL_1169413e-af7a-42ae-bda3-616910cec854.jpg?v=1784509767"},{"product_id":"interlux-flattening-agent-for-1-part-finishes-quart-create-gloss-satin-or-matte-effects-mpn-5509670","title":"Interlux Flattening Agent for 1-Part Finishes, Quart - Create Gloss, Satin or Matte Effects (MPN 5509670)","description":"\u003cp\u003eInterlux Flattening Agent gives you the freedom to fine-tune the sheen of your topside finish. Add it to Interlux one-part finishes and varnishes and, depending on the mix ratio between the product and the additive, dial in a variety of gloss, satin or matte effects. This specially formulated additive contains a fine mineral component that knocks down shine evenly for a professional-looking result on interior or exterior surfaces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Interlux\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 5509670\u003c\/li\u003e\n\u003cli\u003eProduct: Flattening Agent for 1-Part Finishes\u003c\/li\u003e\n\u003cli\u003eSize: 1 Quart (32 fl oz)\u003c\/li\u003e\n\u003cli\u003eItem Form: Liquid\u003c\/li\u003e\n\u003cli\u003ePaint Type: Enamel additive\u003c\/li\u003e\n\u003cli\u003eFinish Effect: Adjustable gloss, satin or matte\u003c\/li\u003e\n\u003cli\u003eUse: Interior or exterior\u003c\/li\u003e\n\u003cli\u003eSurface Recommendation: Painted or varnished surfaces\u003c\/li\u003e\n\u003cli\u003eContains fine mineral additive\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eMixes with Interlux one-part finishes (Brightside Polyurethane and yacht enamels) and varnishes (Schooner Gold, Schooner and Original) to produce the finish you are after.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does Interlux Flattening Agent do?\u003c\/strong\u003e It is a specially formulated additive that reduces the sheen of a finish. Depending on how much you mix in, you can create a variety of gloss, satin or matte effects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich products can I mix it with?\u003c\/strong\u003e It can be mixed with Interlux one-part finishes, including Brightside Polyurethane and yacht enamels, as well as the varnishes Schooner Gold, Schooner and Original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I control the level of gloss?\u003c\/strong\u003e The final sheen depends on the mix ratio between the finish and the flattening agent. Adding more additive produces a flatter, more matte result, while less additive keeps more gloss.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this on both interior and exterior surfaces?\u003c\/strong\u003e Yes. This flattening agent is suitable for interior or exterior use on painted or varnished surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the container size?\u003c\/strong\u003e This is a 1 quart (32 fluid ounce) container.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the right flattening agent for two-part finishes?\u003c\/strong\u003e This version is formulated for one-part finishes and varnishes. A separate flattening agent is offered for two-part products in the range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gives it its flattening effect?\u003c\/strong\u003e It contains a fine mineral additive that evenly reduces surface shine when blended into the finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it change the color of my finish?\u003c\/strong\u003e It is designed to alter the sheen rather than the color, letting you keep your chosen finish while adjusting the level of gloss.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat form does the product come in?\u003c\/strong\u003e It is a liquid additive that you blend into your compatible Interlux finish or varnish before application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number?\u003c\/strong\u003e The manufacturer part number is 5509670.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"Default Title","offer_id":48991680102619,"sku":"ILX-YMA715","price":54.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ilx-yma-715_lg__10797.1558116286.500.750.jpg?v=1785188958"},{"product_id":"pettit-ez-poxy-semi-gloss-white-topside-marine-paint-quart-mpn-1310608","title":"Pettit EZ-Poxy Semi-Gloss White Topside Paint, Quart","description":"\u003cp\u003ePettit EZ-Poxy Semi-Gloss White is a one-part polyurethane topside paint formulated with added silicone for a brilliant shine and easy brushability. It delivers exceptional flow and leveling, laying down smoothly for a clean, professional-looking finish on topside surfaces. Built-in UV filters help the finish resist fading and hold its gloss over time, while the cured film offers water resistance for the demanding marine environment. This quart size covers approximately 300 square feet, making it suited for touch-up work and smaller topside painting jobs. For application, the paint can be thinned as needed using 120 brushing thinner for brush application or 121 spraying thinner for spray application, both sold separately. The semi-gloss white finish gives a bright, clean appearance without the higher-shine look of a full gloss finish, offering a durable, attractive topcoat for boat hulls and topside areas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1310608\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Semi-Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Quart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e One-Part Polyurethane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 300 square feet per quart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Resistance:\u003c\/strong\u003e UV resistant, retains gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Thinners:\u003c\/strong\u003e 120 brushing thinner or 121 spraying thinner (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469004122\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Pettit EZ-Poxy 1310608 have?\u003c\/strong\u003e It is a semi-gloss white finish, part number 1310608.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs EZ-Poxy a one-part or two-part paint?\u003c\/strong\u003e Pettit EZ-Poxy is a one-part polyurethane topside paint, so no separate hardener or mixing step is required before applying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size does this paint come in?\u003c\/strong\u003e This listing is for a quart of Pettit EZ-Poxy Semi-Gloss White, part number 1310608.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much area will a quart of EZ-Poxy cover?\u003c\/strong\u003e A quart of Pettit EZ-Poxy covers approximately 300 square feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes EZ-Poxy need to be thinned before use?\u003c\/strong\u003e EZ-Poxy can be thinned with 120 brushing thinner for brush application or 121 spraying thinner for spray application; both thinners are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Pettit EZ-Poxy UV resistant?\u003c\/strong\u003e Yes, EZ-Poxy contains UV filters that help the semi-gloss white finish retain its gloss over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this paint hold up in wet marine conditions?\u003c\/strong\u003e The cured EZ-Poxy finish is water resistant, which suits it for the marine topside environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a quart of EZ-Poxy weigh?\u003c\/strong\u003e A quart of Pettit EZ-Poxy Semi-Gloss White weighs 3.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between EZ-Poxy's semi-gloss and other sheens?\u003c\/strong\u003e This part number, 1310608, is the semi-gloss white version of EZ-Poxy, giving a bright but less reflective finish than a full gloss sheen.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan EZ-Poxy be applied by brush?\u003c\/strong\u003e Yes, EZ-Poxy is formulated with added silicone for easy brushability, and its flow and leveling properties help it lay down smoothly by brush.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The UPC for Pettit EZ-Poxy Semi-Gloss White, quart, part number 1310608, is 725469004122.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":48991680561371,"sku":"PET-3106Q","price":59.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71aRQRPcUlL.jpg?v=1784509793"},{"product_id":"pettit-ez-poxy-off-white-quart-topside-boat-paint-mpn-1310708","title":"Pettit EZ-Poxy Off White Topside Boat Paint, Quart","description":"\u003cp\u003ePettit EZ-Poxy Off White is a topside boat paint supplied in a quart container, part number 1310708. It is classified for topside (above-waterline) application on boat hulls and surfaces where an off-white finish is wanted. Each quart has a net weight of 3 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1310708\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Topside Boat Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Off White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size:\u003c\/strong\u003e Quart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469032880\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Pettit part number 1310708?\u003c\/strong\u003e Pettit part number 1310708 is Off White.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size does Pettit EZ-Poxy Off White, part 1310708, come in?\u003c\/strong\u003e This part number, 1310708, is packaged in a quart container.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Pettit EZ-Poxy Off White meant for topside or bottom paint use?\u003c\/strong\u003e It is categorized as a topside boat paint, part number 1310708, for above-waterline surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a quart of Pettit EZ-Poxy Off White weigh?\u003c\/strong\u003e A quart of Pettit EZ-Poxy Off White, part 1310708, weighs 3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes this Off White topside boat paint?\u003c\/strong\u003e This Off White topside boat paint, part number 1310708, is made by Pettit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC code for Pettit EZ-Poxy Off White, quart size?\u003c\/strong\u003e The UPC for Pettit part number 1310708, the quart of EZ-Poxy Off White, is 725469032880.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for the quart of Pettit EZ-Poxy Off White?\u003c\/strong\u003e The manufacturer part number is 1310708.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does Pettit part 1310708 fall under?\u003c\/strong\u003e Pettit part number 1310708 is listed under the Topside Boat Paint category.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":48991680626907,"sku":"PET-3107Q","price":58.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/p_2638cd8c-c123-4977-8d9e-6a552ef19f5b.jpg?v=1785347199"},{"product_id":"pettit-ez-poxy-hatteras-off-white-one-part-polyurethane-topside-paint-gallon","title":"Pettit Paint EZ-Poxy Off White Gallon One-Part Polyurethane Topside Enamel","description":"\u003cp\u003ePettit EZ-Poxy is a one-part high gloss polyurethane topside enamel formulated with added silicone for a brilliant shine and easy brushability. It delivers exceptional flow and leveling for a smooth, professional-looking finish without the need to mix a separate catalyst. Built-in UV filters help the finish resist fading and chalking, so the gloss holds up under sun exposure over time.\u003c\/p\u003e\u003cp\u003eThis Off White gallon can is intended for topside and deck surfaces above the waterline. For thinning, use Pettit's 120 brushing thinner when applying by brush or 121 spraying thinner when spray applying; both thinners are sold separately from the paint.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1310806\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Off White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e One-Part Polyurethane Enamel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size:\u003c\/strong\u003e 1 Gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Gel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Recommendation:\u003c\/strong\u003e Deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Thinner:\u003c\/strong\u003e 120 (brushing) or 121 (spraying), sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469004160\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat type of paint is Pettit EZ-Poxy?\u003c\/strong\u003e It is a one-part high gloss polyurethane topside enamel with added silicone for shine and easy brushability, sold under Pettit part number 1310806.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Pettit EZ-Poxy require a separate catalyst or hardener?\u003c\/strong\u003e No. EZ-Poxy is a one-part polyurethane enamel, so it applies straight from the can without mixing in a catalyst.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this gallon of EZ-Poxy?\u003c\/strong\u003e This can, Pettit part number 1310806, is Off White with a gloss finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size container does EZ-Poxy 1310806 come in?\u003c\/strong\u003e It comes in a 1 gallon can, weighing 11.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes EZ-Poxy need to be thinned before application?\u003c\/strong\u003e Use Pettit's 120 brushing thinner for brush application or 121 spraying thinner for spray application; both are sold separately from the paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan EZ-Poxy be sprayed instead of brushed?\u003c\/strong\u003e Yes, EZ-Poxy can be brush applied or sprayed, using 120 thinner for brushing or 121 thinner for spraying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the gloss on EZ-Poxy fade in the sun?\u003c\/strong\u003e EZ-Poxy contains UV filters designed to protect gloss retention, helping the Off White finish resist fading from sun exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is Pettit EZ-Poxy meant for?\u003c\/strong\u003e Pettit EZ-Poxy (part number 1310806) is recommended for deck and topside surfaces above the waterline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a gallon can of EZ-Poxy weigh?\u003c\/strong\u003e A gallon can of Pettit EZ-Poxy weighs 11.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Off White gallon of EZ-Poxy?\u003c\/strong\u003e The UPC for Pettit EZ-Poxy Off White Gallon, part number 1310806, is 725469004160.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":48991681052891,"sku":"PET-3108G","price":174.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31eP2FU2WEL.jpg?v=1784509807"},{"product_id":"interlux-schooner-gold-high-gloss-marine-varnish-quart-32-fl-oz-waterproof-wood-finish","title":"Interlux Schooner Gold High-Gloss Marine Varnish - Quart (32 fl oz) Waterproof Wood Finish","description":"\u003cp\u003eInterlux Schooner Gold is a premium high-gloss marine varnish formulated to protect and beautify exterior and interior wood on boats. It builds a deep, warm gold-toned finish that resists water and weather while bringing out the natural grain of teak, mahogany, and other brightwork. Supplied in a full quart (32 fl oz) can for brush application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Interlux\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5510170\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Schooner Gold Varnish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Marine Varnish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 32 fl oz (Quart), Pack of 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm:\u003c\/strong\u003e Liquid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface:\u003c\/strong\u003e Wood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Brush\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoat \/ Sanding Time:\u003c\/strong\u003e 4-6 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Time:\u003c\/strong\u003e 24 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof:\u003c\/strong\u003e Yes, water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081948000031\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003cp\u003eFor a bright, durable build, apply multiple coats, allowing each coat to dry before lightly sanding to remove any fuzz caused by grain swelling. Sand between coats with 220-320 grit wet-or-dry sandpaper and remove all sanding residue with a solvent-dampened cloth before recoating. On previously coated wood, wet sand with 120-150 grit paper and wipe clean before building fresh coats.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Interlux Schooner Gold Varnish used for?\u003c\/strong\u003e It is a high-gloss marine varnish used to protect and finish exterior and interior wood on boats, including brightwork such as teak and mahogany. It provides a durable, water-resistant, high-gloss coating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does it produce?\u003c\/strong\u003e Schooner Gold produces a warm gold-toned, high-gloss finish that highlights the natural grain of the wood.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much varnish is in each can?\u003c\/strong\u003e Each can contains a full quart, which is 32 fluid ounces (Pack of 1).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this varnish waterproof?\u003c\/strong\u003e Yes. It is formulated to be waterproof and water resistant, making it suitable for marine wood exposed to moisture and weather.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many coats should I apply?\u003c\/strong\u003e Build the finish with multiple coats, sanding lightly between each coat to remove fuzz from grain swelling and to promote adhesion for a smooth, deep gloss.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat grit sandpaper should I use between coats?\u003c\/strong\u003e Sand between coats with 220-320 grit wet-or-dry sandpaper. For previously coated or bare wood preparation, wet sand with 120-150 grit wet-or-dry paper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I prepare the surface before recoating?\u003c\/strong\u003e Remove all sanding residue by wiping the surface with a rag dampened with the proper solvent. Wipe only small areas at a time and change rags frequently to avoid leaving contamination behind.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long should each coat dry before sanding?\u003c\/strong\u003e Allow each coat to dry, typically about 4-6 hours, before lightly sanding. Full dry time is approximately 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces can I apply Schooner Gold to?\u003c\/strong\u003e It is recommended for wood surfaces, including exterior and interior brightwork on boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the varnish applied?\u003c\/strong\u003e It is applied by brush, working with the grain and building thin, even coats for the best gloss and durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number?\u003c\/strong\u003e The manufacturer part number for this quart of Schooner Gold Varnish is 5510170.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"Default Title","offer_id":48991681511643,"sku":"ILX-YVA-500Q","price":57.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ilx-yva-500q_lg__35359.1722493349.500.750.jpg?v=1785188259"},{"product_id":"interlux-cetol-marine-light-quart-amber-high-gloss-uv-wood-finish-for-teak-and-marine-brightwork","title":"Interlux Cetol Marine Light Quart - Amber High-Gloss UV Wood Finish for Teak and Marine Brightwork","description":"\u003cp\u003eCetol Marine Light is a durable, translucent protective wood finish for use above the waterline on interior and exterior marine woods. Formulated with Next Wave UV-absorbing technology, it combines specialty resins and advanced UV absorbers to deliver greater protection, durability, and longevity. It produces a light amber, high-gloss, hard-wearing topcoat that shields teak and other hardwoods against damaging UV rays while remaining flexible and breathable. Cetol Marine Light shares the same trusted formulation as standard Cetol Marine but uses different pigments to create a lighter amber appearance on wood.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Interlux\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5606625\u003c\/li\u003e\n\u003cli\u003eVolume: 1 Quart (32 fl oz)\u003c\/li\u003e\n\u003cli\u003eColor: Light amber \/ natural wood tone\u003c\/li\u003e\n\u003cli\u003eFinish: High gloss\u003c\/li\u003e\n\u003cli\u003eOpacity: Translucent\u003c\/li\u003e\n\u003cli\u003ePaint type: Oil based\u003c\/li\u003e\n\u003cli\u003eCoverage: Approximately 90 square feet\u003c\/li\u003e\n\u003cli\u003eSurface: Wood, above the waterline (interior and exterior)\u003c\/li\u003e\n\u003cli\u003eUV protection: Next Wave UV-absorbing technology\u003c\/li\u003e\n\u003cli\u003eWeight: 2.3 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 792240208048\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNot for use on decks.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Cetol Marine Light used for?\u003c\/strong\u003e Cetol Marine Light is a translucent protective wood finish for marine woods above the waterline, on both interior and exterior surfaces. It protects teak and other hardwoods while producing a light amber, high-gloss appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does Cetol Marine Light produce?\u003c\/strong\u003e It produces a light amber tone on wood. It uses the same formulation as standard Cetol Marine but with different pigments to create a lighter amber appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of finish does it leave?\u003c\/strong\u003e It leaves a high-gloss, hard-wearing topcoat finish that is flexible and breathable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much area does one quart cover?\u003c\/strong\u003e One quart covers approximately 90 square feet, depending on the wood and application method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use Cetol Marine Light on my boat deck?\u003c\/strong\u003e No. This finish is not recommended for use on decks. It is intended for brightwork and marine woods above the waterline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it provide UV protection?\u003c\/strong\u003e Yes. It is formulated with Next Wave UV-absorbing technology, using specialty resins and advanced UV absorbers to shield wood against damaging UV rays for greater durability and longevity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an oil-based product?\u003c\/strong\u003e Yes, Cetol Marine Light is an oil-based wood finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this container?\u003c\/strong\u003e This is a 1 quart can, containing 32 fluid ounces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the finish opaque or see-through?\u003c\/strong\u003e The finish is translucent, allowing the natural grain of the wood to show through while adding a light amber tone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat woods is it suitable for?\u003c\/strong\u003e It is suitable for teak and other hardwoods used in marine applications above the waterline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it suitable for both interior and exterior wood?\u003c\/strong\u003e Yes. Cetol Marine Light can be used on both interior and exterior marine woods above the waterline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the product weigh?\u003c\/strong\u003e The quart container weighs approximately 2.3 pounds.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"Default Title","offer_id":48991681544411,"sku":"ILX-IVA-290Q","price":48.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ILX-IVA-290Q__51477.1722361738.500.750.jpg?v=1785188310"},{"product_id":"interlux-cetol-marine-wood-finish-quart-dark-amber-uv-translucent-teak-finish-above-waterline","title":"Interlux Cetol Marine Wood Finish, Quart - Dark Amber UV Translucent Teak Finish (Above Waterline)","description":"\u003cp\u003eInterlux Cetol Marine is a durable, translucent protective wood finish built for the demands of the marine environment above the waterline. Formulated with Next Wave UV-absorbing technology, special alkyd resin, and high-quality synthetic UV-absorbing pigments, it shields teak and other hard woods from damaging UV rays while producing an attractive dark amber appearance. The flexible, breathable film delivers lasting weather protection with easy application and simple annual maintenance, making it a trusted choice for both interior and exterior brightwork.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Interlux\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5606629\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Cetol Marine Wood Finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1 Quart (32 fl oz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Dark Amber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpacity:\u003c\/strong\u003e Translucent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e Oil-based alkyd\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface:\u003c\/strong\u003e Wood (teak and other hard woods)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse Area:\u003c\/strong\u003e Interior and exterior, above the waterline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Protection:\u003c\/strong\u003e Next Wave UV-absorbing pigments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e High\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer:\u003c\/strong\u003e Can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.2 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 792240208017\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication \u0026amp; Maintenance\u003c\/h3\u003e\u003cp\u003eUse a long-haired natural bristle brush; do not use a foam brush. On new, old, or dry wood, apply Cetol Marine until it puddles on the surface, typically a minimum of 3 coats (4 coats advised for best results), applied within a two-week period. Sanding between coats is not necessary, though light sanding with a sanding pad produces a smoother surface. Where the finish has been used before, an annual maintenance coat is recommended: clean the surface, rinse with fresh water, allow to dry, roughen with a sanding pad, clean again, and apply 1 to 2 coats. For a high-gloss exterior finish, follow with a minimum of 2 coats of Cetol Marine Gloss, sanding lightly between coats with 220-320 grit sandpaper.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color does Cetol Marine produce on wood?\u003c\/strong\u003e Cetol Marine produces an attractive dark amber appearance on wood.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Cetol Marine be used below the waterline?\u003c\/strong\u003e No. Cetol Marine is formulated for use above the waterline on both interior and exterior woods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this container?\u003c\/strong\u003e This is a 1 quart (32 fluid ounce) can.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does Cetol Marine protect wood from the sun?\u003c\/strong\u003e It uses Next Wave UV-absorbing technology with specialty resins and advanced UV absorbers, along with synthetic UV-absorbing pigments, to shield wood against damaging UV rays.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of brush should I use to apply it?\u003c\/strong\u003e Use a long-haired natural bristle brush. Do not use a foam brush.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many coats does new or dry wood require?\u003c\/strong\u003e Apply Cetol Marine until it puddles on the surface, which usually takes a minimum of 3 coats and may take more. A minimum of 4 coats is advised for old or dry wood, applied within a two-week period.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to sand between coats?\u003c\/strong\u003e Sanding between coats is not necessary, but for a smoother surface you can sand lightly between coats with a sanding pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I maintain a previously finished surface?\u003c\/strong\u003e Clean the surface, rinse with fresh water, and allow to dry. Roughen the surface with a sanding pad, clean it, and apply 1 or 2 maintenance coats. An annual maintenance coat is recommended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I achieve a high-gloss finish?\u003c\/strong\u003e Yes. After applying Cetol Marine, apply a minimum of 2 coats of Cetol Marine Gloss, sanding lightly between coats with 220-320 grit sandpaper. Cetol Marine Gloss should only be applied over Cetol Marine, Marine Light, or Marine Natural Teak.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of finish is Cetol Marine?\u003c\/strong\u003e It is a durable, translucent, breathable, and flexible oil-based wood finish with a satin sheen.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat woods is Cetol Marine suitable for?\u003c\/strong\u003e It is suitable for teak and other hard woods, for both interior and exterior applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Cetol Marine oil-based or water-based?\u003c\/strong\u003e Cetol Marine is an oil-based finish formulated with a special alkyd resin.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"Default Title","offer_id":48991682068699,"sku":"ILX-IVA-300Q","price":48.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51oWpjDQb9L.jpg?v=1784509835"},{"product_id":"pettit-ez-poxy-one-part-polyurethane-topside-paint-hatteras-off-white-quart","title":"Pettit Paint EZ-Poxy One-Part Polyurethane Topside Paint, Hatteras Off White, Quart, Part 1310808","description":"\u003cp\u003ePettit Paint EZ-Poxy is a one-part high gloss polyurethane topside paint formulated with the addition of silicone for a brilliant shine and easy brushability. It delivers exceptional flow and leveling for a smooth, professional-looking finish, and it is built with UV filters that help the coating retain its gloss over time outdoors. This quart of EZ-Poxy is finished in Hatteras Off White, a classic off-white shade for boat topsides. The formula is a liquid enamel supplied in a can and is recommended for use on fiberglass boat hulls. Coverage runs 25 to 30 square feet per quart, so plan your quantity accordingly for the surface area being coated. EZ-Poxy is water resistant and intended for outdoor marine use above the waterline. For best results, thinning can be done with Pettit 120 brushing thinner for brush application or 121 spraying thinner for spray application, both sold separately. This paint is part of Pettit Paint's Easypoxy line of one-part topside finishes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1310808\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Off White (Hatteras)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Type:\u003c\/strong\u003e High-Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e Enamel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Liquid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Volume:\u003c\/strong\u003e 1 Quart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 32 Fluid Ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 25-30 square feet per quart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Recommendation:\u003c\/strong\u003e Fiberglass boat hulls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e UV Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance Level:\u003c\/strong\u003e Water Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor Outdoor Usage:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469004177\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Pettit Paint EZ-Poxy Hatteras Off White used for?\u003c\/strong\u003e It is a one-part high gloss polyurethane topside paint (part number 1310808) formulated for fiberglass boat hulls above the waterline, in the Hatteras Off White shade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs EZ-Poxy a one-part or two-part paint?\u003c\/strong\u003e EZ-Poxy is a one-part polyurethane topside paint, so no separate hardener or mixing ratio is required before application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much surface area does a quart of EZ-Poxy cover?\u003c\/strong\u003e One quart of Pettit EZ-Poxy (part 1310808) covers approximately 25 to 30 square feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan EZ-Poxy be sprayed instead of brushed?\u003c\/strong\u003e Yes, EZ-Poxy can be applied by brush or spray; for spraying, thin the paint with Pettit 121 spraying thinner, sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thinner should I use with EZ-Poxy for brush application?\u003c\/strong\u003e Pettit 120 brushing thinner is recommended for thinning EZ-Poxy when applying it by brush; it is sold separately from the paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint UV resistant?\u003c\/strong\u003e Yes, Pettit EZ-Poxy contains UV filters that help the Hatteras Off White finish retain its gloss when exposed to sunlight outdoors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size container does EZ-Poxy 1310808 come in?\u003c\/strong\u003e This listing is a 1 quart (32 fluid ounce) can of Pettit EZ-Poxy in Hatteras Off White.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is EZ-Poxy recommended for?\u003c\/strong\u003e Pettit EZ-Poxy is recommended for fiberglass boat hulls, applied to the topside areas above the waterline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs EZ-Poxy water resistant once cured?\u003c\/strong\u003e Yes, the cured EZ-Poxy finish is water resistant, which suits it to marine topside use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the addition of silicone do in this paint?\u003c\/strong\u003e The silicone added to Pettit EZ-Poxy improves flow and leveling and contributes to a brilliant, glossy shine on the finished surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Hatteras Off White the same as plain white for this paint?\u003c\/strong\u003e No, Hatteras Off White is a distinct off-white color option for Pettit EZ-Poxy, separate from a pure white shade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat form does EZ-Poxy come in?\u003c\/strong\u003e Pettit EZ-Poxy (part 1310808) is supplied as a liquid enamel paint in a can, ready for thinning and application per the recommended thinners.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":48991682363611,"sku":"PET-3108Q","price":61.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71rHQIbkeRL.jpg?v=1784509843"},{"product_id":"interlux-cetol-marine-translucent-wood-finish-dark-amber-1-gallon","title":"Interlux Cetol Marine Translucent Wood Finish, Dark Amber - 1 Gallon","description":"\u003cp\u003eCetol Marine is a durable, translucent protective wood finish for use above the waterline on interior and exterior woods. Built with Next Wave UV-absorbing technology, it pairs specialty alkyd resins with high-quality synthetic UV-absorbing pigments to shield wood from damaging UV rays while producing an attractive dark amber appearance. The result is a flexible, breathable finish that delivers long-lasting weather protection for teak and other hard woods, all with easy application and simple maintenance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Interlux\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5606627\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1 Gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTechnology:\u003c\/strong\u003e Next Wave UV-absorbing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppearance:\u003c\/strong\u003e Translucent, dark amber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Area:\u003c\/strong\u003e Above the waterline, interior and exterior wood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable Substrates:\u003c\/strong\u003e Teak and other hard woods\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.7 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 792240208024\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStir thoroughly and apply with a long-haired natural bristle brush. Do not use a foam brush.\u003c\/li\u003e\n\u003cli\u003eOn new, old, or dry wood, apply until the finish puddles on the surface. This usually takes a minimum of 3 coats and may take more; apply these coats within a 2-week period. A minimum of 4 coats is advised in this case.\u003c\/li\u003e\n\u003cli\u003eSanding between coats is not necessary, but for a smoother surface, sand lightly between coats with a sanding pad.\u003c\/li\u003e\n\u003cli\u003eFor a high-gloss exterior finish, overcoat with a minimum of 2 coats of Cetol Marine Gloss, sanding lightly between coats with 220-320 grit sandpaper.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMaintenance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAn annual maintenance coat is recommended once the base coats are established.\u003c\/li\u003e\n\u003cli\u003eBefore applying a maintenance coat, clean the surface, rinse with fresh water, and allow to dry. Roughen the surface with a sanding pad, clean, and apply 1 or 2 coats.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Cetol Marine used for?\u003c\/strong\u003e Cetol Marine is a translucent protective wood finish for use above the waterline on interior and exterior woods, including teak and other hard woods. It provides UV protection while producing an attractive dark amber appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does Cetol Marine produce?\u003c\/strong\u003e It produces an attractive dark amber appearance on wood, enhancing the natural grain while providing a warm, rich tone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is Next Wave technology?\u003c\/strong\u003e Next Wave is a UV-absorbing technology that combines specialty alkyd resins with advanced UV absorbers and high-quality synthetic UV-absorbing pigments to shield wood against damaging UV rays for greater protection, durability, and longevity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many coats of Cetol Marine should I apply?\u003c\/strong\u003e On new, old, or dry wood, apply until the finish puddles on the surface. This usually takes a minimum of 3 coats and may require more, applied within a 2-week period. A minimum of 4 coats is advised for new or dry wood.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of brush should I use?\u003c\/strong\u003e Use a long-haired natural bristle brush. Do not use a foam brush.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to sand between coats?\u003c\/strong\u003e Sanding between coats is not necessary, but for a smoother surface you can sand lightly between coats with a sanding pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I get a high-gloss finish?\u003c\/strong\u003e For a high-gloss exterior finish, apply Cetol Marine as your base and then apply a minimum of 2 coats of Cetol Marine Gloss. Sand lightly between coats with 220-320 grit sandpaper for the best finish. Cetol Marine Gloss should only be applied over Cetol Marine, Marine Light, or Marine Natural Teak.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I maintain a Cetol Marine finish?\u003c\/strong\u003e An annual maintenance coat is recommended. Clean the surface, rinse with fresh water, and allow to dry. Roughen the surface with a sanding pad, clean it, and apply 1 or 2 maintenance coats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Cetol Marine be used below the waterline?\u003c\/strong\u003e No. Cetol Marine is formulated for use above the waterline on interior and exterior woods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Cetol Marine breathable?\u003c\/strong\u003e Yes. Cetol Marine provides a flexible, breathable finish that allows the wood to move naturally while delivering weather protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this container?\u003c\/strong\u003e This is a 1 gallon container of Cetol Marine wood finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is Cetol Marine suitable for?\u003c\/strong\u003e It is suitable for exterior cabin and trim as well as interior cabin and trim, and works well on teak and other hard woods.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"Default Title","offer_id":48991682396379,"sku":"ILX-IVA-300G","price":151.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51h-E396onL.jpg?v=1784509844"},{"product_id":"pettit-ez-poxy-matterhorn-white-topside-boat-paint-1-quart-mpn-1311108","title":"Pettit EZ-Poxy Matterhorn White Topside Boat Paint, 1 Quart (Part 1311108)","description":"\u003cp\u003ePettit EZ-Poxy Matterhorn White is a topside boat paint supplied in a 1 quart container, sold individually. It is formulated with corrosion-resistant materials intended for long-term durability in marine environments, making it suitable for use on boats, kayaks, and pontoons, including tight or hard-to-reach areas. This Matterhorn White finish is designed to match original specifications for straightforward application and reliable results on above-waterline surfaces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1311108\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e EZ-Poxy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Matterhorn White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Topside Boat Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size:\u003c\/strong\u003e 1 Quart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Sold Individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469032798\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Pettit EZ-Poxy Matterhorn White used for?\u003c\/strong\u003e It is a topside boat paint, part number 1311108, intended for use on above-waterline surfaces of boats, kayaks, and pontoons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size container does this come in?\u003c\/strong\u003e The Pettit EZ-Poxy Matterhorn White (part 1311108) is packaged in a 1 quart container, sold individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this paint?\u003c\/strong\u003e Matterhorn White, as indicated in the product name EZ-Poxy Matterhorn White.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does one quart of this paint weigh?\u003c\/strong\u003e One quart of Pettit EZ-Poxy Matterhorn White (part 1311108) weighs 2.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint corrosion-resistant?\u003c\/strong\u003e Yes, it is formulated with corrosion-resistant materials designed for long-term durability in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint be used in tight spaces on smaller boats?\u003c\/strong\u003e Yes, Pettit EZ-Poxy Matterhorn White is suitable for tight spaces on boats, kayaks, or pontoons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the paint sold as a single unit or in a multipack?\u003c\/strong\u003e Part 1311108 is sold individually, one quart per unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this product?\u003c\/strong\u003e The manufacturer part number is 1311108.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for Pettit EZ-Poxy Matterhorn White, 1 quart?\u003c\/strong\u003e The UPC is 725469032798.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this paint match original manufacturer specifications?\u003c\/strong\u003e Yes, Pettit EZ-Poxy Matterhorn White (part 1311108) is designed to match original specifications for reliable application and results.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":48991682461915,"sku":"PET-3111Q","price":58.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41sqtOwcwjL.jpg?v=1784509847"},{"product_id":"pettit-easypoxy-semi-gloss-white-marine-topside-paint-1-gallon","title":"Pettit Paint Easypoxy Semi-Gloss White Topside Paint, 1 Gallon (1310606)","description":"\u003cp\u003ePettit Paint Easypoxy Semi-Gloss White is a one-part, high-gloss polyurethane topside paint formulated for use above the waterline on fiberglass, wood, and properly primed metal boat surfaces. The formula is enhanced with silicone for a brilliant shine and easier brushability, and it delivers exceptional flow and leveling for a smooth, professional-looking finish with fewer brush marks. Built-in UV filters help the coating resist fading and chalking, giving it superior gloss retention over time compared to unfiltered topside paints.\u003c\/p\u003e\u003cp\u003eThis semi-gloss white finish is supplied in a 1-gallon container and is intended for topside application by brush or spray. For spray application or for thinning to adjust flow, Pettit recommends its 120 brushing thinner or 121 spraying thinner, both sold separately. Because it is a one-part polyurethane, it cures by solvent evaporation and does not require a separate hardener or mixing ratio, making it straightforward to apply for do-it-yourself boat owners as well as professional detailers refinishing hulls, transoms, and topsides.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1310606\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e One-Part Polyurethane Topside Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Semi-Gloss White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size:\u003c\/strong\u003e 1 Gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469004115\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Thinner (Brushing):\u003c\/strong\u003e Pettit 120 (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Thinner (Spraying):\u003c\/strong\u003e Pettit 121 (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat type of paint is Pettit Easypoxy Semi-Gloss White?\u003c\/strong\u003e Pettit Easypoxy Semi-Gloss White (part number 1310606) is a one-part, high-gloss polyurethane topside paint, not a two-part epoxy, so it does not require mixing a separate hardener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint suitable for use above or below the waterline?\u003c\/strong\u003e Pettit Easypoxy Semi-Gloss White is a topside paint intended for use above the waterline, on surfaces such as hulls' topsides, transoms, and cabin exteriors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size container does this paint come in?\u003c\/strong\u003e This listing for Pettit Easypoxy Semi-Gloss White is a 1-gallon container, sold as a single unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Easypoxy Semi-Gloss White need to be thinned before applying?\u003c\/strong\u003e Thinning is optional and depends on application method: Pettit recommends its 120 brushing thinner for brush application or 121 spraying thinner for spray application, both sold separately from the paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this paint have silicone in the formula?\u003c\/strong\u003e Pettit adds silicone to the Easypoxy Semi-Gloss White formula to improve shine and make the paint easier to brush on, resulting in exceptional flow and leveling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this paint fade or chalk over time?\u003c\/strong\u003e Easypoxy Semi-Gloss White contains UV filters that give it superior gloss retention, helping resist fading and chalking compared to paints without UV protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a gallon of this paint weigh?\u003c\/strong\u003e A 1-gallon container of Pettit Easypoxy Semi-Gloss White (1310606) weighs 12 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces can Easypoxy Semi-Gloss White be applied to?\u003c\/strong\u003e This one-part polyurethane topside paint can be applied to fiberglass, wood, and previously painted or properly prepared boat surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Easypoxy a one-part or two-part paint system?\u003c\/strong\u003e Easypoxy Semi-Gloss White is a one-part polyurethane, meaning it is ready to apply without mixing in a separate curing agent, unlike two-part epoxy paints.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish level does this paint provide?\u003c\/strong\u003e This product is the semi-gloss finish of Pettit's Easypoxy polyurethane topside paint line, offering a brilliant shine without the full high-gloss sheen of the gloss variant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint be applied by spray gun?\u003c\/strong\u003e Yes, Pettit Easypoxy Semi-Gloss White can be spray applied when thinned with Pettit's 121 spraying thinner, sold separately.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":48991682560219,"sku":"PET-3106G","price":164.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51qFSGMQpoL.jpg?v=1784509849"},{"product_id":"pettit-ez-poxy-hatteras-off-white-one-part-polyurethane-topside-paint-16-93-oz-aerosol-spray","title":"Pettit Paint EZ-Poxy Hatteras Off White Topside and Deck Enamel Aerosol, 16.93 oz","description":"\u003cp\u003ePettit EZ-Poxy (Easypoxy) in Hatteras Off White is a one-part polyurethane topside and deck enamel designed for boat owners who want a brilliant, gelcoat-like finish without the complexity of a two-part paint system. The formula is enhanced with silicone, which gives it a high-gloss shine and easy brush-ability, and it is fortified with advanced ultraviolet filters that help the finish resist fading and retain its gloss over time outdoors. Compared to more demanding topside coatings, EZ-Poxy is built to be exceptionally easy to apply, more economical, and more forgiving, making it a practical choice for do-it-yourself boat maintenance and touch-up work.\u003c\/p\u003e\u003cp\u003eThis listing is the 16.93 fluid ounce aerosol spray can in the Hatteras Off White gloss color, ideal for spot spraying, small deck and topside sections, hardware, and detail work where a full brush-and-roll application is not needed. The paint is water resistant and intended for outdoor, exterior use on metal surfaces. Note that actual color may vary slightly from printed color chips.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1310820\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Topside Boat Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Hatteras Off White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Volume:\u003c\/strong\u003e 16.93 Fluid Ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Aerosol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Aerosol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e Enamel, Spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Recommendation:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor\/Outdoor Usage:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Resistance:\u003c\/strong\u003e UV Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469031784\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor Code:\u003c\/strong\u003e #FFFDF0\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Pettit EZ-Poxy used for?\u003c\/strong\u003e Pettit EZ-Poxy (part number 1310820) is a one-part polyurethane topside and deck enamel meant for painting a boat's topsides and deck areas, giving a durable, high-gloss finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this aerosol can?\u003c\/strong\u003e This can is Hatteras Off White, a gloss finish with color code #FFFDF0.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a spray can or a brush-on paint?\u003c\/strong\u003e This version of EZ-Poxy Hatteras Off White (1310820) comes in a 16.93 fluid ounce aerosol spray can for easy, no-mess application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs EZ-Poxy a one-part or two-part paint system?\u003c\/strong\u003e EZ-Poxy is a one-part polyurethane enamel, so there is no separate hardener or catalyst to mix in before application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes EZ-Poxy resist fading in the sun?\u003c\/strong\u003e Yes, Pettit EZ-Poxy is fortified with advanced ultraviolet filters that enhance gloss retention and durability when the paint is exposed to sunlight outdoors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint water resistant?\u003c\/strong\u003e Pettit EZ-Poxy Hatteras Off White (1310820) is rated water resistant, making it suitable for marine exterior use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is this paint recommended for?\u003c\/strong\u003e This aerosol is recommended for metal surfaces and is intended for outdoor, exterior application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the can weigh?\u003c\/strong\u003e The Pettit EZ-Poxy 1310820 aerosol weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does EZ-Poxy leave once cured?\u003c\/strong\u003e It leaves a gloss finish with a gelcoat-like brilliance, thanks to the silicone-enhanced formula that also improves shine and brush-ability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does EZ-Poxy compare to other one-part topside paints?\u003c\/strong\u003e Pettit formulates EZ-Poxy to be more economical, easier to apply, and more forgiving during application than many comparable one-part topside enamels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for Pettit EZ-Poxy Hatteras Off White 1310820?\u003c\/strong\u003e The UPC for this product is 725469031784.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the actual paint color differ from the color chip?\u003c\/strong\u003e Yes, Pettit notes that color differences may occur between the actual paint and the color chips shown, so minor variation from Hatteras Off White chips is expected.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":48991682691291,"sku":"PET-3108A","price":23.53,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51j9IsSQasL.jpg?v=1784509856"},{"product_id":"interlux-cetol-marine-natural-teak-wood-finish-gallon-satin-above-waterline","title":"Interlux Cetol Marine Natural Teak Wood Finish - Gallon (Satin, Above Waterline)","description":"\u003cp\u003eCetol Marine Natural Teak delivers a flexible, breathable, satin translucent finish for wood above the waterline on both interior and exterior surfaces. Its rich golden, dark amber tone enhances the natural beauty and grain of the wood while providing lasting protection with Next Wave UV-absorbing technology.\u003c\/p\u003e\u003cp\u003eFormulated for easy application and simple maintenance, it builds a durable finish that stands up to sun and weather. For a high-gloss result, top the cured coats with Cetol Marine Gloss.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Interlux\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 5606633\u003c\/li\u003e\n\u003cli\u003eSize: 1 Gallon (128 fl oz)\u003c\/li\u003e\n\u003cli\u003eFinish: Satin\u003c\/li\u003e\n\u003cli\u003eColor: Rich golden \/ dark amber\u003c\/li\u003e\n\u003cli\u003eCoverage: 360 sq ft per gallon\u003c\/li\u003e\n\u003cli\u003eItem Form: Liquid\u003c\/li\u003e\n\u003cli\u003eCompatible Material: Wood\u003c\/li\u003e\n\u003cli\u003eRecommended Use: Interior and exterior, above the waterline\u003c\/li\u003e\n\u003cli\u003eWeight: 9.68 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 081948000291\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUse a long-haired natural bristle brush; do not use a foam brush.\u003c\/li\u003e\n\u003cli\u003eOn new, old, or dry wood, apply until the finish puddles on the surface, typically a minimum of 3 coats, all within a 2-week period; a minimum of 4 coats is advised.\u003c\/li\u003e\n\u003cli\u003eSanding between coats is not required, but for a smoother surface sand lightly with a sanding pad.\u003c\/li\u003e\n\u003cli\u003eFor annual maintenance, clean the surface, rinse with fresh water, allow to dry, roughen with a sanding pad, clean, and apply 1 or 2 fresh coats.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of finish does Cetol Marine Natural Teak produce?\u003c\/strong\u003e It produces a flexible, breathable, satin translucent finish with a rich golden, dark amber tone that enhances the natural beauty and grain of the wood.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can this finish be used?\u003c\/strong\u003e It is designed for interior and exterior wood above the waterline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much area does one gallon cover?\u003c\/strong\u003e One gallon covers approximately 360 square feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many coats should I apply?\u003c\/strong\u003e On wood that has not been finished before, or on old and dry wood, apply until the finish puddles on the surface. This usually takes a minimum of 3 coats, and a minimum of 4 coats is advised for best results.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow quickly should the coats be applied?\u003c\/strong\u003e Apply the initial coats within a period of 2 weeks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs sanding required between coats?\u003c\/strong\u003e Sanding between coats is not necessary, but for a smoother surface you can sand lightly with a sanding pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of brush should I use?\u003c\/strong\u003e Use a long-haired natural bristle brush. Do not use a foam brush.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I maintain the finish over time?\u003c\/strong\u003e For annual maintenance, clean the surface, rinse with fresh water, allow it to dry, roughen the surface with a sanding pad, clean again, and apply 1 or 2 fresh coats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I get a high-gloss finish with this product?\u003c\/strong\u003e Yes. Apply the Natural Teak finish first, then apply a minimum of 2 coats of Cetol Marine Gloss, sanding lightly between coats with 220-320 grit sandpaper for the best result.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this finish offer UV protection?\u003c\/strong\u003e Yes, it features Next Wave UV-absorbing technology to help protect the wood from sun exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the color of the finish?\u003c\/strong\u003e It has a rich golden, dark amber appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a gallon weigh?\u003c\/strong\u003e A gallon weighs approximately 9.68 pounds.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"Default Title","offer_id":48991683182811,"sku":"ILX-IVA-316G","price":151.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61X_twurQgL.jpg?v=1784509859"},{"product_id":"sikkens-cetol-marine-high-gloss-varnish-quart-high-gloss-overcoat-finish-for-marine-wood","title":"Sikkens Cetol Marine High Gloss Varnish, Quart - High-Gloss Overcoat Finish for Marine Wood","description":"\u003cp\u003eSikkens Cetol Marine High Gloss delivers a rich, high-gloss, varnish-like finish for exterior marine woodwork. Formulated as an overcoat finish, it goes on easily over standard Cetol Marine or Cetol Marine Light to give bright work a smooth, reflective sheen. Because it is designed as a topcoat rather than a stand-alone coating, it is applied over a base Cetol system to complete the buildup and enhance depth and gloss.\u003c\/p\u003e\u003cp\u003eThis oil-based gloss can be applied without sanding between coats, making recoating faster and simpler. As few as three coats provide protection, followed by yearly touch-ups to keep wood looking its best. Note that this gloss does not contain built-in UV protection, so it should always be used over a UV-protective base coat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Sikkens\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 5606631\u003c\/li\u003e\n\u003cli\u003eProduct Type: Marine Varnish\u003c\/li\u003e\n\u003cli\u003eFinish: High Gloss\u003c\/li\u003e\n\u003cli\u003eSize: Quart\u003c\/li\u003e\n\u003cli\u003eMaterial: Oil based\u003c\/li\u003e\n\u003cli\u003eColor Code: ZJ*01*227\u003c\/li\u003e\n\u003cli\u003eApplication: Brush, roller, or spray\u003c\/li\u003e\n\u003cli\u003eUPC: 792240232012\u003c\/li\u003e\n\u003cli\u003eWeight: 2.2 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Sikkens Cetol Marine High Gloss used for?\u003c\/strong\u003e It is a high-gloss overcoat finish for exterior marine woodwork, giving bright work a smooth, reflective, varnish-like sheen.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be used as a stand-alone coating?\u003c\/strong\u003e No. It is designed as an overcoat finish and should be applied over a base coat such as standard Cetol Marine or Cetol Marine Light rather than directly on bare wood as the only coating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this gloss provide UV protection?\u003c\/strong\u003e No. It does not contain built-in UV protection, so it should be applied over a UV-protective base coat to safeguard the wood.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to sand between coats?\u003c\/strong\u003e No. It can be applied without sanding between coats, which makes recoating faster and easier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many coats are recommended?\u003c\/strong\u003e As few as three coats provide protection, followed by yearly touch-ups to maintain the finish and gloss.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this container?\u003c\/strong\u003e This is a quart-size container.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an oil-based or water-based product?\u003c\/strong\u003e It is an oil-based marine gloss.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat can I apply it over?\u003c\/strong\u003e It goes on easily over standard Cetol Marine or Cetol Marine Light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can it be applied?\u003c\/strong\u003e It can be applied by brush, roller, or spray. Stir thoroughly before application to blend any settled compounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of finish does it produce?\u003c\/strong\u003e It produces a high-gloss, varnish-like finish that is closer to a traditional varnish than other oil-based Cetol products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I maintain the finish over time?\u003c\/strong\u003e After the initial coats, apply yearly touch-up coats to keep the wood protected and looking its best.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"Default Title","offer_id":48991684788443,"sku":"ILX-IVA-315Q","price":53.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ILX-IVA-315Q__13517.1722508664.500.750.jpg?v=1785188055"},{"product_id":"interlux-cetol-marine-natural-teak-wood-finish-quart-satin-translucent-marine-varnish-for-interior-and-exterior-wood","title":"Interlux Cetol Marine Natural Teak Wood Finish - Quart, Satin Translucent Marine Varnish for Interior and Exterior Wood","description":"\u003cp\u003eCetol Marine Natural Teak delivers a flexible, breathable, satin translucent finish that protects and beautifies wood above the waterline on both interior and exterior surfaces. Its rich golden color enhances the natural grain and warmth of the wood while producing an attractive dark amber look. Formulated with Next Wave UV-absorbing technology, it offers the easy application and simple maintenance the Cetol line is known for.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Interlux\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 5606635\u003c\/li\u003e\n\u003cli\u003eProduct: Cetol Marine Natural Teak\u003c\/li\u003e\n\u003cli\u003eSize: 1 Quart (32 fl oz)\u003c\/li\u003e\n\u003cli\u003eFinish: Satin, translucent\u003c\/li\u003e\n\u003cli\u003eColor: Rich golden \/ dark amber\u003c\/li\u003e\n\u003cli\u003eForm: Liquid\u003c\/li\u003e\n\u003cli\u003eMaterial: Tung Oil\u003c\/li\u003e\n\u003cli\u003eCoverage: 90 sq ft per quart\u003c\/li\u003e\n\u003cli\u003eCompatible Material: Wood\u003c\/li\u003e\n\u003cli\u003eRecommended Use: Interior and exterior wood, above the waterline\u003c\/li\u003e\n\u003cli\u003eTechnology: Next Wave UV-absorbing\u003c\/li\u003e\n\u003cli\u003eUPC: 081948413169\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication and Maintenance\u003c\/h3\u003e\u003cp\u003eFor new, old, or dry wood, apply Cetol Natural Teak until it puddles on the surface, typically a minimum of 3 coats and sometimes more, applied within a two week period. A minimum of 4 coats is advised for old or dry wood. Sanding between coats is not necessary, but for a smoother surface, sand lightly between coats with a sanding pad. Use a long-haired natural bristle brush and do not use a foam brush. If the finish has been used before, an annual maintenance coat is recommended: clean the surface, rinse with fresh water and allow to dry, roughen with a sanding pad, clean, and apply 1 or 2 coats. For a high gloss exterior, follow with a minimum of 2 coats of Cetol Marine Gloss, sanding lightly between coats with 220-320 grit sandpaper.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Cetol Marine Natural Teak used for?\u003c\/strong\u003e It is a flexible, breathable, satin translucent wood finish used above the waterline on interior and exterior woods to protect them and enhance their natural grain with a rich golden color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many coats should I apply?\u003c\/strong\u003e On new, old, or dry wood, apply until the finish puddles on the surface, which usually takes a minimum of 3 coats and sometimes more. A minimum of 4 coats is advised for old or dry wood.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to sand between coats?\u003c\/strong\u003e Sanding between coats is not necessary. However, for a smoother surface you can sand lightly between coats using a sanding pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of brush should I use?\u003c\/strong\u003e Use a long-haired natural bristle brush. Do not use a foam brush.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much area does one quart cover?\u003c\/strong\u003e One quart covers approximately 90 square feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does it produce?\u003c\/strong\u003e It produces a satin, translucent finish with a rich golden to dark amber color that highlights the natural beauty and grain of the wood.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be used on both interior and exterior wood?\u003c\/strong\u003e Yes. It is formulated for use on both interior and exterior wood above the waterline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I maintain the finish over time?\u003c\/strong\u003e An annual maintenance coat is recommended. Clean the surface, rinse with fresh water and allow to dry, roughen it with a sanding pad, clean again, and apply 1 or 2 coats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I achieve a high gloss finish?\u003c\/strong\u003e After applying Natural Teak, apply a minimum of 2 coats of Cetol Marine Gloss, sanding lightly between coats with 220-320 grit sandpaper for the best result.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow quickly should the initial coats be applied?\u003c\/strong\u003e The initial coats should all be applied within a period of 2 weeks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is Next Wave technology?\u003c\/strong\u003e Next Wave is a UV-absorbing technology built into the formula to help protect the wood finish from sun exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this container?\u003c\/strong\u003e This is a 1 quart container, equal to 32 fluid ounces.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"Default Title","offer_id":48991685509339,"sku":"ILX-IVA-316Q","price":48.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51Yfhj7FonL.jpg?v=1784509871"},{"product_id":"pettit-ez-bilge-white-marine-bilge-paint-1-quart-durable-boat-bilge-coating-mpn-1312408","title":"Pettit EZ-Bilge White Marine Bilge Paint, 1 Quart, Part 1312408 (Replaces PET-3124Q)","description":"\u003cp\u003ePettit EZ-Bilge White (part number 1312408) is a bilge paint formulated for use inside the bilge area of boats, kayaks, and pontoons. It is designed for long-term durability in marine environments and offers corrosion-resistant protection for the metal and fiberglass surfaces commonly found in a boat's bilge. The white color makes it easier to spot standing water, oil residue, or debris during routine bilge inspections, helping owners catch problems early.\u003c\/p\u003e\u003cp\u003eThis product is packaged as a 1 quart container and is sold individually, so each unit contains a single quart of Pettit EZ-Bilge White. It is well suited for smaller vessels and tight, hard-to-reach spaces where a full topside paint job is unnecessary but a durable, purpose-built bilge coating is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1312408\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e EZ-Bilge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size:\u003c\/strong\u003e 1 Quart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Bilge Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Sold individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469025998\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eSuitable for boat, kayak, and pontoon bilge areas; not restricted to a specific make or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePET-3124Q\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Pettit EZ-Bilge White used for?\u003c\/strong\u003e It is a bilge paint applied inside the bilge area of a boat to provide a corrosion-resistant, durable coating; Pettit EZ-Bilge White (part 1312408) is formulated specifically for that purpose rather than for topside or hull use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size does part number 1312408 come in?\u003c\/strong\u003e Pettit EZ-Bilge White part 1312408 is packaged in a 1 quart container, sold individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Pettit EZ-Bilge White corrosion resistant?\u003c\/strong\u003e Yes, it uses corrosion-resistant materials designed for long-term durability in marine environments, which is why it is applied inside boat bilges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan EZ-Bilge White be used on kayaks and pontoons, not just larger boats?\u003c\/strong\u003e Yes, Pettit EZ-Bilge White is designed for tight spaces and works on boats, kayaks, and pontoons alike.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a quart of Pettit EZ-Bilge White (1312408) weigh?\u003c\/strong\u003e One quart of Pettit EZ-Bilge White weighs 2.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is Pettit part number 1312408?\u003c\/strong\u003e Part number 1312408 is the white color option in the Pettit EZ-Bilge line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Pettit EZ-Bilge White sold in multi-packs?\u003c\/strong\u003e No, Pettit EZ-Bilge White quart (1312408) is sold individually, one quart per unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for Pettit EZ-Bilge White quart 1312408?\u003c\/strong\u003e The UPC for this product is 725469025998.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Pettit EZ-Bilge White cross-reference to any other part numbers?\u003c\/strong\u003e Yes, Pettit EZ-Bilge White (1312408) corresponds to catalog number PET-3124Q, which some aftermarket listings reference as the number it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of marine paint is EZ-Bilge White in?\u003c\/strong\u003e It is classified as a bilge paint, distinct from topside or antifouling boat paints, and is intended for interior bilge surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs genuine Pettit EZ-Bilge White different from generic aftermarket bilge paint?\u003c\/strong\u003e Pettit part 1312408 is the original manufacturer product; some aftermarket brands sell paints marketed as replacements cross-referenced to the same catalog number, PET-3124Q, but 1312408 is the genuine Pettit item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part 1312408?\u003c\/strong\u003e Ordering Pettit EZ-Bilge White part 1312408 gets you one 1 quart container of white bilge paint, sold individually.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":48991686525147,"sku":"PET-3124Q","price":48.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/315bOsdHD_L.jpg?v=1784509896"},{"product_id":"pettit-ez-cabin-coat-marine-interior-paint-white-quart-mpn-1312108-mold-and-mildew-resistant-cabin-coating","title":"Pettit Paint EZ-Cabin Coat Mold and Mildew Resistant Marine Interior Paint, White, Quart","description":"\u003cp\u003eEZ-Cabin Coat is a water-based interior paint from Pettit Paint formulated for surfaces prone to moisture, such as boat cabins, heads, lockers, cabinets, drawers, and closets. It cures to a durable, mold and mildew-proof semi-gloss finish that resists the humid, enclosed conditions that typically cause interior paint to fail and mildew to take hold. The finish stays color-fast and bright over time rather than yellowing or chalking in a damp cabin environment.\u003c\/p\u003e\u003cp\u003eEZ-Cabin Coat is formulated to adhere directly to most glossy interior surfaces without prior sanding, which speeds up recoat and refinishing jobs. It applies easily with low odor and a fast dry time, and can be used on drywall, wood, fiberglass, wood coverings, and tile below deck. It is packaged as a liquid coating in a quart can with a white, semi-gloss finish and is suited to both indoor and outdoor application on marine interior surfaces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1312108\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Type:\u003c\/strong\u003e Semi-Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Volume:\u003c\/strong\u003e Quart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Liquid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Moisture Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor\/Outdoor Usage:\u003c\/strong\u003e Indoor, Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Time:\u003c\/strong\u003e 6 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469012639\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Pettit EZ-Cabin Coat used for?\u003c\/strong\u003e Pettit EZ-Cabin Coat is a marine interior paint made for surfaces prone to moisture, such as cabin interiors, heads, lockers, cabinets, drawers, and closets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to sand before applying EZ-Cabin Coat?\u003c\/strong\u003e No. EZ-Cabin Coat provides adhesion to most glossy interior surfaces without prior sanding, so existing glossy paint typically does not need to be sanded down first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces can EZ-Cabin Coat be applied to?\u003c\/strong\u003e It can be used on drywall, wood, fiberglass, wood coverings, and tile, making it suitable for most below-deck interior surfaces on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs EZ-Cabin Coat resistant to mold and mildew?\u003c\/strong\u003e Yes, EZ-Cabin Coat (Pettit part number 1312108) cures to a tough, mold and mildew-proof finish designed to resist growth in humid cabin conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does EZ-Cabin Coat take to dry?\u003c\/strong\u003e EZ-Cabin Coat has a dry time of 6 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does this paint come in?\u003c\/strong\u003e This listing is for the white, semi-gloss version of Pettit EZ-Cabin Coat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size container does EZ-Cabin Coat come in?\u003c\/strong\u003e Pettit EZ-Cabin Coat (part number 1312108) is sold in a quart-size can.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan EZ-Cabin Coat be used outdoors as well as indoors?\u003c\/strong\u003e Yes, it is rated for both indoor and outdoor use, though it is primarily formulated for moisture-prone interior areas like cabins and heads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs EZ-Cabin Coat a water-based or solvent-based paint?\u003c\/strong\u003e EZ-Cabin Coat is a water-based paint, which contributes to its low odor and fast application characteristics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill EZ-Cabin Coat stay bright and color-fast over time?\u003c\/strong\u003e Yes, the finish is formulated to stay good-looking, bright, and color-fast for years despite exposure to humid, enclosed cabin conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a quart of Pettit EZ-Cabin Coat weigh?\u003c\/strong\u003e A quart can of Pettit EZ-Cabin Coat, part number 1312108, weighs 2.7 pounds.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":48991686656219,"sku":"PET-3121Q","price":43.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61MTCs5CuLL.jpg?v=1784509901"},{"product_id":"pettit-ez-poxy-gloss-white-topside-paint-1-gallon-mpn-1317506-one-part-polyurethane-for-fiberglass-and-metal","title":"Pettit Paint EZ-Poxy Gloss White Topside Paint, 1 Gallon (1317506)","description":"\u003cp\u003ePettit Paint EZ-Poxy is a one-part high gloss polyurethane topside paint designed for boat hulls and topsides above the waterline. Silicone is added to the formula for a brilliant shine and easy brushability, giving a smooth, professional finish whether applied by brush, roller, or spray. Exceptional flow and leveling characteristics help minimize brush marks and lap lines, while built-in UV filters protect the finish and provide superior gloss retention over time, resisting the fading and chalking that can occur with lesser topside paints.\u003c\/p\u003e\u003cp\u003eThis gallon of EZ-Poxy is finished in gloss white and is recommended for use on metal or fiberglass surfaces, making it suitable for a wide range of boat hulls, transoms, and topsides. It is intended for outdoor, exterior use and dries to the touch in about 5 hours. Coverage is approximately 375 square feet per gallon, depending on surface porosity and application method. For thinning, Pettit recommends 120 brushing thinner for brush application or 121 spraying thinner for spray application, both sold separately. Each can includes a brush for application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1317506\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Type:\u003c\/strong\u003e Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Volume:\u003c\/strong\u003e 128 Fluid Ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e Polyurethane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Liquid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Brush\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Recommendation:\u003c\/strong\u003e Metal or Fiberglass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Uses For Product:\u003c\/strong\u003e Exterior\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor Outdoor Usage:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 375 square feet per gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Time:\u003c\/strong\u003e 5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e UV Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance Level:\u003c\/strong\u003e Water Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469004436\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat type of paint is Pettit EZ-Poxy?\u003c\/strong\u003e EZ-Poxy is a one-part high gloss polyurethane topside paint, not a two-part epoxy, so no mixing of a separate hardener is required before application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much surface area does one gallon of EZ-Poxy cover?\u003c\/strong\u003e One gallon of Pettit EZ-Poxy (part number 1317506) covers approximately 375 square feet, though actual coverage varies with surface porosity and application method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does EZ-Poxy take to dry?\u003c\/strong\u003e EZ-Poxy dries to the touch in about 5 hours under normal conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan EZ-Poxy be sprayed instead of brushed?\u003c\/strong\u003e Yes, EZ-Poxy can be applied by brush, roller, or spray; for spray application Pettit recommends thinning with 121 spraying thinner, sold separately, while 120 brushing thinner is recommended for brush application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is EZ-Poxy designed for?\u003c\/strong\u003e This gloss white EZ-Poxy topside paint is recommended for use on metal or fiberglass surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes EZ-Poxy resist fading in the sun?\u003c\/strong\u003e Yes, EZ-Poxy contains UV filters that provide superior gloss retention and help the finish resist fading from sun exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does this gallon come in?\u003c\/strong\u003e This listing is the gloss white finish of Pettit EZ-Poxy, part number 1317506, in a one gallon can.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint intended for use above or below the waterline?\u003c\/strong\u003e EZ-Poxy is a topside paint intended for exterior use above the waterline, not an antifouling bottom paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a gallon of EZ-Poxy weigh?\u003c\/strong\u003e A gallon can of Pettit EZ-Poxy weighs 11.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the can include a brush?\u003c\/strong\u003e Yes, a brush is included as part of the components with this can of EZ-Poxy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Pettit EZ-Poxy waterproof?\u003c\/strong\u003e Yes, EZ-Poxy is rated as waterproof and water resistant once cured.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The UPC for the 1 gallon gloss white Pettit EZ-Poxy (part number 1317506) is 725469004436.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":48991687016667,"sku":"PET-3175G","price":164.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3181-JMaeyL.jpg?v=1784509906"},{"product_id":"pettit-ez-decks-non-skid-deck-paint-white-quart-slip-resistant-polyurethane-marine-deck-finish","title":"Pettit Paint EZ-Decks Non-Skid Deck Finish, White, Quart","description":"\u003cp\u003ePettit Paint EZ-Decks is a tough polyurethane non-skid performance deck finish designed for boat decks and cabin soles. It contains a silica grit that builds a slip-resistant, textured surface underfoot, helping crew and passengers keep their footing on wet or angled deck surfaces. The finish is formulated to resist long-term abrasion and abuse from foot traffic, gear, and everyday marine use, while its UV and fade resistant formula holds its color and performance under continuous sun exposure. EZ-Decks is supplied in liquid form in a quart can and is recommended for wood deck surfaces, making it a practical choice for topside boat painting projects where both durability and traction matter. Each quart covers approximately 150 square feet, making it easy to estimate how much product is needed before starting a deck refinishing job. The white color option shown here provides a clean, bright deck finish that also helps reflect heat on sun-exposed surfaces. As an outdoor-rated, waterproof coating, EZ-Decks is built to hold up to ongoing exposure to sun, rain, and spray without breaking down. This product is intended for use on marine and boat deck surfaces as part of a topside boat paint system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1312708\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Type:\u003c\/strong\u003e Textured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Quart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Volume:\u003c\/strong\u003e 1 Quart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e UV Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e Oil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Liquid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Recommendation:\u003c\/strong\u003e Wood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Uses For Product:\u003c\/strong\u003e Marine or boat deck surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 150 square feet per quart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor\/Outdoor Usage:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469025479\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Pettit Paint EZ-Decks used for?\u003c\/strong\u003e EZ-Decks (part number 1312708) is a polyurethane non-skid deck finish used on boat decks and cabin soles to create a slip-resistant walking surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much area does one quart of EZ-Decks cover?\u003c\/strong\u003e One quart of Pettit Paint EZ-Decks covers approximately 150 square feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs EZ-Decks slip-resistant?\u003c\/strong\u003e Yes, EZ-Decks contains a silica grit that produces a slip-resistant, textured finish on deck surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this EZ-Decks quart?\u003c\/strong\u003e This EZ-Decks quart (part number 1312708) is White.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill EZ-Decks fade or lose color in the sun?\u003c\/strong\u003e No, EZ-Decks is formulated to be UV and fade resistant, so it is designed to hold its color and performance under sun exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is EZ-Decks recommended for?\u003c\/strong\u003e Pettit recommends EZ-Decks for wood deck surfaces on boats and other marine or boat deck applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs EZ-Decks waterproof?\u003c\/strong\u003e Yes, EZ-Decks is a waterproof, outdoor-rated coating intended for marine deck surfaces exposed to sun, rain, and spray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of paint is EZ-Decks?\u003c\/strong\u003e EZ-Decks is an oil-based, liquid polyurethane deck paint supplied in a can.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow durable is the EZ-Decks finish?\u003c\/strong\u003e EZ-Decks is designed to resist long-term abrasion and abuse from foot traffic and everyday marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size can does EZ-Decks come in?\u003c\/strong\u003e This listing is for a one quart can of Pettit Paint EZ-Decks, part number 1312708.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan EZ-Decks be used indoors?\u003c\/strong\u003e EZ-Decks is intended for outdoor use on marine and boat deck surfaces.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":48991687049435,"sku":"PET-3127Q","price":61.06,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31KilxxGOjL.jpg?v=1784509907"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/i_7f97bc44-3761-47ae-a8c1-ff646e5c7046.jpg?v=1785356928","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-maintenance-cleaning-paint-topside-paint-primers-varnish.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}