{"title":"Propeller Hubs \u0026 Hub Kits","description":null,"products":[{"product_id":"sierra-18-2166-propeller-shaft-for-mercruiser-alpha-one-sterndrive-replaces-oem-44-66060","title":"Sierra Prop Shaft 18-2166, Replaces 44-66060 \/ 44-824110, Fits MR\/ALPHA \u0026 #1 Units","description":"\u003cp\u003eThe Sierra Prop Shaft 18-2166 is a machined replacement propeller shaft for MerCruiser sterndrive lower units, covering All #1 and MR\/ALPHA units at serial number 2791957 and above, as well as 165 (6 cylinder) units at serial number 2763442 and above. The prop shaft transmits rotational power from the lower unit gearcase out to the propeller, and a worn, corroded, or bent shaft is a common cause of vibration, reduced thrust, or seal leakage at the propeller end of the drive. Machined to precise tolerances, the 18-2166 is built as a direct-fit alternative to the original equipment shaft, using the same mounting interface so no modification to the lower unit housing is needed during installation. This shaft carries Sierra part number 18-2166 and cross-references to multiple Mercury Marine and MerCruiser OEM numbers, so it can be matched to your old shaft or parts diagram regardless of which OEM number is stamped on it. Because a prop shaft carries continuous rotational load and sits at a water-exposed seal interface, replacing a worn or damaged shaft promptly helps prevent secondary wear to the gearcase bearings and seals. Before ordering, confirm your unit's serial number falls within the listed ranges to ensure correct fitment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2166\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.58 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999311702\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e 44-66060, 44-660603, 44-824110, 44-660602, 44-55857\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAll #1 and MR\/ALPHA units, serial number 2791957 and above\u003c\/li\u003e\n\u003cli\u003e165 (6 cylinder) units, serial number 2763442 and above\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e44-66060\u003c\/li\u003e\n\u003cli\u003e44-660603\u003c\/li\u003e\n\u003cli\u003e44-824110\u003c\/li\u003e\n\u003cli\u003e44-660602\u003c\/li\u003e\n\u003cli\u003e44-55857\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2166 prop shaft fit?\u003c\/strong\u003e The 18-2166 fits All #1 and MR\/ALPHA units at serial number 2791957 and above, and also fits 165 (6 cylinder) units at serial number 2763442 and above. Check your lower unit's serial number against these ranges before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM numbers does the Sierra 18-2166 replace?\u003c\/strong\u003e It replaces OEM numbers 44-66060, 44-660603, 44-824110, 44-660602, and 44-55857, so it is a direct match for any of these part numbers found on the original shaft or in a parts diagram.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this prop shaft weigh?\u003c\/strong\u003e The Sierra Prop Shaft 18-2166 weighs 4.58 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-2166 an OEM or aftermarket part?\u003c\/strong\u003e The 18-2166 is a Sierra-brand replacement part, sold under Sierra's own part number rather than the original Mercury Marine or MerCruiser part number, but it is built to cross-reference directly with those OEM numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-2166 fit a 165 (6 cylinder) unit?\u003c\/strong\u003e Yes, the 18-2166 prop shaft fits 165 (6 cylinder) units at serial number 2763442 and above.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material or finish does the 18-2166 shaft have?\u003c\/strong\u003e The Sierra 18-2166 prop shaft has a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes installing the 18-2166 require modifying the lower unit?\u003c\/strong\u003e No modification to the lower unit housing is needed; the 18-2166 uses the same mounting interface as the original shaft it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the symptoms of a worn or bad prop shaft?\u003c\/strong\u003e Vibration, reduced thrust, and seal leakage at the propeller end of the drive are common signs that a prop shaft such as the 18-2166 needs replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for this prop shaft?\u003c\/strong\u003e The Sierra part number for this prop shaft is 18-2166.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-2166 prop shaft?\u003c\/strong\u003e Listed product dimensions for the 18-2166 are 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-2166 fit MR\/ALPHA units?\u003c\/strong\u003e Yes, the 18-2166 fits All #1 and MR\/ALPHA units at serial number 2791957 and above.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988105179355,"sku":"SIE-18-2166","price":447.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2166_lg__41303.1558121034.500.750.jpg?v=1785188561"},{"product_id":"sierra-18-2288-propeller-shaft-for-evinrude-outboard-replaces-wm-118-2288-machined-prop-shaft","title":"Sierra Prop Shaft 18-2288 for Evinrude 25D\/40\/48\/50 HP Outboards","description":"\u003cp\u003eThe Sierra 18-2288 is a machined prop shaft engineered as a direct-fit driveline component for select Evinrude outboard motors. As the shaft that connects the outboard's lower unit gearcase to the propeller, it transmits rotational power from the forward and reverse gear set to the prop, so its dimensional accuracy and finish directly affect smooth power transfer and gearcase alignment. The shaft carries a machined exterior finish for consistent fit against the gear set and clutch components it works alongside in the lower unit.\u003c\/p\u003e\u003cp\u003eThis part is built for Evinrude 25D, 40, 48, and 50 HP (2 Cylinder) outboards across the model years listed below. Always confirm your outboard's horsepower rating, model year, and cylinder configuration against the fitment table before ordering, since Sierra assigns different prop shaft part numbers to other Evinrude horsepower ranges and years.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2288\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Prop Shaft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.92 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282236052\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvinrude 25D, 1989-95, ALL models\u003c\/li\u003e\n\u003cli\u003eEvinrude 40 HP, 1989-97, ALL models\u003c\/li\u003e\n\u003cli\u003eEvinrude 48 HP, 1989-96, ALL models\u003c\/li\u003e\n\u003cli\u003eEvinrude 50 HP (2 Cyl.), 1989-97\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards does the Sierra 18-2288 prop shaft fit?\u003c\/strong\u003e The 18-2288 fits Evinrude 25D outboards from 1989-95, Evinrude 40 HP outboards from 1989-97, Evinrude 48 HP outboards from 1989-96, and Evinrude 50 HP 2 Cylinder outboards from 1989-97, all model configurations listed as ALL for those horsepower and year combinations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM cross-reference number for this prop shaft?\u003c\/strong\u003e No separate OEM cross-reference or replaces number is listed for this part; 18-2288 is the part number to use when ordering or verifying fit against your outboard's parts diagram.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-2288 prop shaft weigh?\u003c\/strong\u003e The Sierra 18-2288 prop shaft weighs 2.92 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 18-2288 prop shaft have?\u003c\/strong\u003e This prop shaft has a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-2288 fit a 50 HP Evinrude with a 3 cylinder engine?\u003c\/strong\u003e No. The 18-2288 is specified for the 50 HP 2 Cylinder Evinrude configuration from 1989-97; a 3 cylinder 50 HP Evinrude from 1997 uses a different Sierra prop shaft part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-2288 come with the gear set or clutch?\u003c\/strong\u003e The 18-2288 listing covers the prop shaft only; the forward gear, reverse gear, and clutch used alongside it in the lower unit are separate, individually numbered components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-2288 prop shaft?\u003c\/strong\u003e The listed product dimensions for the Sierra 18-2288 are 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2288 a genuine Sierra part or aftermarket?\u003c\/strong\u003e The 18-2288 is a genuine Sierra-branded prop shaft, identified by Sierra part number 18-2288 and UPC 808282236052.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 18-2288 on a 40 HP Evinrude from the 1980s?\u003c\/strong\u003e Only if the engine falls within the 1989-97 model years listed for the 40 HP fitment; 40 HP Evinrude outboards built in 1984-88 use a different prop shaft part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box with the 18-2288 prop shaft?\u003c\/strong\u003e The 18-2288 ships as a single machined prop shaft component.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988105736411,"sku":"SIE-18-2288","price":117.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2288_lg__65344.1558123964.500.750.jpg?v=1785188306"},{"product_id":"sierra-18-4210-prop-cone-for-volvo-penta-stern-drive-replaces-oem-850785-854045-fits-aq200-290","title":"Sierra 18-4210 Prop Cone for Volvo Penta AQ200-290 Stern Drives, Replaces 854045-2, VOLVO 850785-7","description":"\u003cp\u003eThe Sierra 18-4210 Prop Cone is a replacement propeller cone designed for Volvo Penta stern drive applications, including AQ200, 250, 270, 270T, 275, 280, 280T, 280PT, and 290 models. The prop cone fits over the propeller hub and shaft assembly, streamlining water flow behind the propeller to improve efficiency and reduce drag during operation. As a wear item that is exposed to constant water contact and occasional impact during propeller service, the prop cone should be inspected whenever the propeller is removed for maintenance or replacement.\u003c\/p\u003e\u003cp\u003eThis Sierra prop cone is built as a direct equivalent to the original Volvo Penta parts it replaces, so it installs using the same fit and mounting method as the OEM component. It is sold as a single unit and is intended for stern drive owners performing propeller service, replacing a damaged or corroded cone, or restoring lower unit components to original specification.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-4210\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Prop Cone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.36 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999317575\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVolvo Penta AQ200\u003c\/li\u003e\n\u003cli\u003eVolvo Penta AQ250\u003c\/li\u003e\n\u003cli\u003eVolvo Penta AQ270\u003c\/li\u003e\n\u003cli\u003eVolvo Penta AQ270T\u003c\/li\u003e\n\u003cli\u003eVolvo Penta AQ275\u003c\/li\u003e\n\u003cli\u003eVolvo Penta AQ280\u003c\/li\u003e\n\u003cli\u003eVolvo Penta AQ280T\u003c\/li\u003e\n\u003cli\u003eVolvo Penta AQ280PT\u003c\/li\u003e\n\u003cli\u003eVolvo Penta AQ290\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVOLVO 850785-7\u003c\/li\u003e\n\u003cli\u003e854045-2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-4210 prop cone used for?\u003c\/strong\u003e It is a propeller cone that mounts over the propeller hub on Volvo Penta stern drives, streamlining water flow behind the propeller and covering the shaft during operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Volvo Penta stern drives does the 18-4210 prop cone fit?\u003c\/strong\u003e The Sierra 18-4210 fits Volvo Penta AQ200, 250, 270, 270T, 275, 280, 280T, 280PT, and 290 stern drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-4210 replace OEM Volvo Penta part numbers?\u003c\/strong\u003e Yes, the 18-4210 is a direct equivalent for Volvo Penta OEM numbers 850785-7 and 854045-2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-4210 prop cone weigh?\u003c\/strong\u003e The Sierra 18-4210 prop cone weighs 0.36 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many prop cones come in one order?\u003c\/strong\u003e One order includes a single Sierra 18-4210 prop cone, sold individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-4210 a genuine Volvo Penta part or an aftermarket replacement?\u003c\/strong\u003e The 18-4210 is a Sierra-manufactured aftermarket part built to replace Volvo Penta OEM numbers 850785-7 and 854045-2, not a Volvo Penta branded part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should a boat owner replace the prop cone on a Volvo Penta stern drive?\u003c\/strong\u003e The prop cone should be checked and replaced if it is cracked, corroded, or missing whenever the propeller is removed for service on a compatible Volvo Penta stern drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of the 18-4210 prop cone straightforward for a DIY boat owner?\u003c\/strong\u003e Yes, since the Sierra 18-4210 is designed to mount using the same fit as the original Volvo Penta prop cone, it installs the same way during routine propeller service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-4210 covered by a warranty?\u003c\/strong\u003e The Sierra 18-4210 prop cone is covered under Sierra's manufacturer warranty against defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-4210 prop cone?\u003c\/strong\u003e The UPC for the Sierra 18-4210 prop cone is 030999317575.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988171043035,"sku":"SIE-18-4210","price":78.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-4210_lg__95090.1558125957.500.750.jpg?v=1785188796"},{"product_id":"michigan-wheel-200-xhs-ii-hub-kit-flo-torq-ii-interchangeable-for-evinrude-johnson-v6-v8-gearcase-1991-present","title":"Michigan Wheel 200 XHS II Hub Kit for Evinrude\/Johnson OMC Sterndrive V6\/V8 Gearcase, 1991 to Present","description":"\u003cp\u003eThe Michigan Wheel 200 is an XHS II Xchangeable Hub Kit built to replace or spare out the exchangeable hub inside compatible outboard propellers. At the core of the kit is a Delrin cushioned sleeve that absorbs the impact and stress caused by shifting gears, allowing the hub to spin under significant impact so the load is taken by the hub instead of the gearcase or lower unit. This protects the more expensive components of the drive from shock damage during hard shifts or prop strikes.\u003c\/p\u003e\u003cp\u003eThe Michigan Wheel 200 hub is designed for use with Vortex and Apollo prop housings and is interchangeable with Mercury's Flo-Torq II hub system, giving boat owners flexibility when sourcing a replacement or keeping a spare on hand. It is compatible with Evinrude\/Johnson outboards using the OMC Sterndrive V6\/V8 gearcase, 1991 to present. The kit is finished in black rubber with a brushed exterior and ships as a single, complete hub kit ready to install into a compatible prop housing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Engines\/Drives:\u003c\/strong\u003e Evinrude\/Johnson OMC Sterndrive V6\/V8 Gearcase, 1991 to Present\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchangeable With:\u003c\/strong\u003e Mercury Flo-Torq II hub system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProp Housing Compatibility:\u003c\/strong\u003e Vortex and Apollo prop housings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSleeve Material:\u003c\/strong\u003e Delrin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Brushed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014984016339\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe Michigan Wheel 200 XHS II Hub Kit fits Evinrude\/Johnson outboards equipped with the OMC Sterndrive V6\/V8 gearcase, 1991 to present, and is designed for use in Vortex and Apollo prop housings.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Michigan Wheel 200 hub kit used for?\u003c\/strong\u003e It is an XHS II Xchangeable Hub Kit that replaces the interior hub of a compatible propeller, allowing the hub to absorb shifting impact and protect the lower unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich engines and drives does the Michigan Wheel 200 fit?\u003c\/strong\u003e This hub kit is compatible with Evinrude\/Johnson outboards using the OMC Sterndrive V6\/V8 gearcase, 1991 to present.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hub kit interchangeable with Mercury parts?\u003c\/strong\u003e Yes, the Michigan Wheel 200 XHS II hub is designed to be interchangeable with Mercury's Flo-Torq II hub system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat prop housings work with this hub kit?\u003c\/strong\u003e The Michigan Wheel 200 is designed for use with Vortex and Apollo prop housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the hub sleeve made of?\u003c\/strong\u003e The kit uses a Delrin cushioned sleeve to absorb the impact and stress caused by shifting gears.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Michigan Wheel 200 hub kit weigh?\u003c\/strong\u003e The hub kit weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Michigan Wheel 200 hub kit?\u003c\/strong\u003e It is finished in black rubber with a brushed exterior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the hub kit protect the lower unit during impacts?\u003c\/strong\u003e Yes, the Delrin sleeve in the Michigan Wheel 200 is designed to spin under significant impact so the hub absorbs shock instead of the lower unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a universal fit hub kit?\u003c\/strong\u003e The Michigan Wheel 200 XHS II Hub Kit is listed as a universal fit for compatible Vortex and Apollo prop housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Michigan Wheel 200?\u003c\/strong\u003e The Michigan Wheel 200 hub kit carries a 1-year limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Michigan Wheel 200 hub kit?\u003c\/strong\u003e The kit includes one complete XHS II hub kit with the Delrin cushioned sleeve for installation into a compatible prop housing.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991272829147,"sku":"MIW-200","price":55.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__86003.1722505684.500.750.jpg?v=1785188672"},{"product_id":"michigan-wheel-201-xhs-ii-prop-hub-kit-for-evinrude-johnson-omc-v6-v8-gearcases-1984-1990","title":"Michigan Wheel 201 XHS II Exchangeable Hub Kit for Evinrude\/Johnson OMC V6\/V8 Outboard Gearcases 1984-1990","description":"\u003cp\u003eThe Michigan Wheel 201 is an XHS II Xchangeable Hub Kit built to bring high performance and versatility to Evinrude, Johnson, and OMC Sterndrive outboards. At the core of the kit is a Delrin cushioned sleeve that absorbs the impact and stress created every time the gearcase shifts, and it is engineered to spin under significant load to protect the lower unit from damage. This hub kit is sized for the Vortex and Apollo prop housings and is also interchangeable with Mercury's Flo-Torq II hub system, giving boat owners flexibility when sourcing a replacement or keeping a spare prop ready to go.\u003c\/p\u003e\u003cp\u003eThe kit fits Evinrude\/Johnson Outboards and OMC Sterndrive applications using a V6\/V8 gearcase from 1984-1990. It ships as a single-item kit with a black rubber hub sleeve component and is a straightforward swap for anyone rebuilding or replacing a worn exchangeable hub system on a compatible gearcase.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 201\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e XHS II Exchangeable Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Evinrude\/Johnson Outboards, OMC Sterndrive V6\/V8 Gearcase, 1984-1990\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProp Housing Compatibility:\u003c\/strong\u003e Vortex and Apollo prop housings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchangeable Hub System:\u003c\/strong\u003e Mercury Flo-Torq II hub system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber (Delrin cushioned sleeve)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.5 x 3 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014984016346\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvinrude\/Johnson Outboards\u003c\/li\u003e\n\u003cli\u003eOMC Sterndrive, V6\/V8 Gearcase\u003c\/li\u003e\n\u003cli\u003e1984-1990\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Michigan Wheel 201 hub kit used for?\u003c\/strong\u003e It is an exchangeable hub kit that replaces the impact-absorbing hub inside a compatible propeller, protecting the gearcase when the propeller strikes something or absorbs shifting stress. The Michigan Wheel 201 uses a Delrin cushioned sleeve designed to spin under significant impact rather than transferring that force to the lower unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Michigan Wheel 201 fit Evinrude and Johnson outboards?\u003c\/strong\u003e Yes, the Michigan Wheel 201 is designed for Evinrude\/Johnson Outboards and OMC Sterndrive applications using a V6\/V8 gearcase, covering the 1984-1990 range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Michigan Wheel 201 compatible with Mercury Flo-Torq II hub systems?\u003c\/strong\u003e Yes, the Michigan Wheel 201 XHS II hub kit is interchangeable with Mercury's Flo-Torq II hub system, in addition to its native Vortex and Apollo prop housing fitment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat prop housings work with this hub kit?\u003c\/strong\u003e The Michigan Wheel 201 is designed for use with Vortex and Apollo prop housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the hub sleeve made from?\u003c\/strong\u003e The Michigan Wheel 201 uses a Delrin cushioned rubber sleeve, chosen because Delrin absorbs impact and stress from gear shifting while holding up to repeated engagement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Michigan Wheel 201 hub kit?\u003c\/strong\u003e It is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Michigan Wheel 201 weigh?\u003c\/strong\u003e The Michigan Wheel 201 hub kit weighs 1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Michigan Wheel 201?\u003c\/strong\u003e The item measures 5.5 x 3 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in the Michigan Wheel 201 kit?\u003c\/strong\u003e The kit includes 1 hub component, sold as a single-item exchangeable hub kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Michigan Wheel 201 be used as a spare or replacement prop hub?\u003c\/strong\u003e Yes, its interchangeability with the Flo-Torq II system and fitment to Vortex and Apollo housings makes the Michigan Wheel 201 a practical choice for a replacement hub or a spare kept on board.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Michigan Wheel part?\u003c\/strong\u003e Yes, part number 201 is manufactured by Michigan Wheel as part of its XHS II Xchangeable Hub Kit lineup.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991273189595,"sku":"MIW-201","price":55.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__01390.1722353166.500.750.jpg?v=1785188069"},{"product_id":"michigan-wheel-203-xhs-ii-hub-kit-for-yamaha-v4-v6-outboards-115-130-hp-15-tooth-spline-1984-present","title":"Michigan Wheel 203 XHS II Hub Kit for Yamaha Outboards, 115-130 HP, 1984-Present, 15 Tooth Spline","description":"\u003cp\u003eThe Michigan Wheel 203 is an XHS II hub kit built to fit Yamaha outboards rated 115-130 HP, 1984-Present, with a 15 tooth spline propeller shaft. Hub kits like this convert a propeller to use the XHS\/XHS II bushing exchange system, which lets the bushing absorb shock and torque during shifting and impact instead of transferring that load directly to the gearcase and lower unit. This protects the drivetrain from damage in the event the propeller strikes debris or bottom, and it allows the bushing to be replaced independently of the propeller itself if it wears out or is damaged.\u003c\/p\u003e\u003cp\u003eThe kit is a single-unit item designed for straightforward installation onto the propeller shaft, matching the 15 tooth spline count specified for this application. Michigan Wheel backs the propeller bushing and hub kit components, including XHS\/XHS II hub kit parts, with a one-year limited warranty against defects in material or workmanship under normal pleasure boat use, covering the original consumer purchaser.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 203\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e XHS II Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Yamaha, 115-130 HP, 1984-Present\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpline Count:\u003c\/strong\u003e 15 Tooth Spline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014984016360\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on hub kit components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eYamaha outboards, 115-130 HP, 1984-Present, 15 tooth spline\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Michigan Wheel 203 hub kit fit?\u003c\/strong\u003e The Michigan Wheel 203 XHS II hub kit is designed for Yamaha outboards rated 115-130 HP, 1984-Present, with a 15 tooth spline propeller shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many teeth does the spline on this hub kit have?\u003c\/strong\u003e This hub kit uses a 15 tooth spline, matching the propeller shaft configuration on the specified Yamaha 115-130 HP outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is an XHS II hub kit used for?\u003c\/strong\u003e An XHS II hub kit, such as the Michigan Wheel 203, lets a propeller use a replaceable bushing system so shock and torque loads are absorbed by the bushing rather than transferred directly into the gearcase and lower unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the bushing replaceable if it wears out?\u003c\/strong\u003e Yes, the XHS II hub kit system in the Michigan Wheel 203 is designed so the bushing can be replaced independently of the propeller if it becomes worn or damaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Michigan Wheel 203 include a warranty?\u003c\/strong\u003e Michigan Wheel provides a one-year limited warranty to the original consumer purchaser covering defects in material or workmanship in the propeller bushing and XHS\/XHS II hub kit components under normal pleasure boat use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Michigan Wheel 203 hub kit weigh?\u003c\/strong\u003e The Michigan Wheel 203 hub kit weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat year range of Yamaha outboards does this hub kit cover?\u003c\/strong\u003e The Michigan Wheel 203 covers Yamaha outboards from 1984 to present in the 115-130 HP range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Michigan Wheel part?\u003c\/strong\u003e Yes, part number 203 is a genuine Michigan Wheel XHS II hub kit, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Michigan Wheel 203?\u003c\/strong\u003e The Michigan Wheel 203 is supplied as a single hub kit unit intended for installation with a compatible propeller on the specified Yamaha outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the warranty cover accidental damage or improper installation?\u003c\/strong\u003e No, Michigan Wheel's one-year limited warranty on the 203 hub kit excludes normal wear, accidental damage, modification, improper installation, and improper maintenance.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991273287899,"sku":"MIW-203","price":55.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__91143.1722376391.500.750.jpg?v=1785188069"},{"product_id":"michigan-wheel-202sh-xhs-ii-hub-kit-flo-torq-ii-interchange-for-mercruiser-alpha-one-bravo-one-mercury-mariner-40-300-hp-outboards","title":"Michigan Wheel 202SH XHS II Hub Kit for Mercury Flo-Torq II, Mercruiser Alpha One\/Bravo One, Force, Honda and Yamaha Outboards","description":"\u003cp\u003eThe Michigan Wheel 202SH is an XHS II Xchangeable Hub Kit built to protect your outboard or sterndrive's lower unit while giving you a durable, reusable hub system inside your propeller. At its core is a Delrin cushioned sleeve that absorbs the impact and stress created by shifting gears. That sleeve is engineered to spin under significant impact, which lets the hub sacrifice itself to protect the more expensive components in your lower gearcase rather than transmitting shock load straight through the drivetrain.\u003c\/p\u003e\u003cp\u003eThe 202SH is designed for use with Vortex and Apollo prop housings and is interchangeable with Mercury's Flo-Torq II hub system, making it a practical option whether you are rebuilding a prop hub or keeping a spare on hand. The hub kit is ambidextrous, so it is not restricted to one rotation direction. It is finished in black and ships as a single hub kit (1 item).\u003c\/p\u003e\u003cp\u003eFitment spans a wide range of outboard and sterndrive applications, including Mercruiser Alpha One and Bravo One drives under 400 HP, Mercury\/Mariner\/Sea Ray outboards from 40-140 HP and 135-300 HP, Force 85-150 HP dual exhaust units, Force 75-150 HP units with the Mercury 4-1\/4 inch gearcase, Honda outboards 70-90 HP (through 1998), and Yamaha outboards 80-175 HP (through 1983).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 202SH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e XHS II Xchangeable Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchangeable Hub System:\u003c\/strong\u003e Mercury Flo-Torq II\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Prop Housings:\u003c\/strong\u003e Vortex and Apollo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSleeve Material:\u003c\/strong\u003e Delrin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Bronze; Urethane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand Orientation:\u003c\/strong\u003e Ambidextrous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.5 x 3 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014984016629\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercruiser Alpha One and Bravo One (less than 400 HP)\u003c\/li\u003e\n\u003cli\u003eMercury\/Mariner\/Sea Ray 40-140 HP\u003c\/li\u003e\n\u003cli\u003eMercury\/Mariner\/Sea Ray 135-300 HP\u003c\/li\u003e\n\u003cli\u003eForce 85-150 HP (Dual Exhaust Units)\u003c\/li\u003e\n\u003cli\u003eForce 75-150 HP (Mercury 4-1\/4 inch Gearcase)\u003c\/li\u003e\n\u003cli\u003eHonda Outboards 70-90 HP (through 1998)\u003c\/li\u003e\n\u003cli\u003eYamaha Outboards 80-175 HP (through 1983)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eInterchangeable with the Mercury Flo-Torq II hub system\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Michigan Wheel 202SH hub kit used for?\u003c\/strong\u003e The 202SH is an XHS II Xchangeable Hub Kit that fits inside a propeller and uses a Delrin cushioned sleeve to absorb the impact and stress of shifting gears, protecting the lower unit from shock damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 202SH hub kit compatible with Mercury's Flo-Torq II system?\u003c\/strong\u003e Yes, the Michigan Wheel 202SH is interchangeable with Mercury's Flo-Torq II hub system, so it can be used as a direct alternative in props designed around that hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich prop housings work with this hub kit?\u003c\/strong\u003e The 202SH is designed for use with Vortex and Apollo prop housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 202SH fit both left-hand and right-hand rotation propellers?\u003c\/strong\u003e Yes, the Michigan Wheel 202SH hub kit has ambidextrous hand orientation, meaning it is not restricted to a single rotation direction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines and horsepower ranges is the 202SH hub kit compatible with?\u003c\/strong\u003e It fits Mercruiser Alpha One and Bravo One drives under 400 HP, Mercury\/Mariner\/Sea Ray outboards from 40-140 HP and 135-300 HP, Force 85-150 HP dual exhaust units, Force 75-150 HP units with the Mercury 4-1\/4 inch gearcase, Honda outboards 70-90 HP (through 1998), and Yamaha outboards 80-175 HP (through 1983).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 202SH hub kit made from?\u003c\/strong\u003e The Michigan Wheel 202SH is constructed from bronze and urethane, with a Delrin cushioned sleeve as the impact-absorbing component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 202SH hub kit weigh?\u003c\/strong\u003e The Michigan Wheel 202SH hub kit weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 202SH hub kit?\u003c\/strong\u003e It is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in the 202SH hub kit package?\u003c\/strong\u003e The package includes 1 hub kit item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 202SH hub kit?\u003c\/strong\u003e The Michigan Wheel 202SH measures 5.5 x 3 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I replace the hub kit instead of the whole propeller?\u003c\/strong\u003e A worn or damaged hub, like the Delrin sleeve in the 202SH, can be replaced on its own to restore shock absorption and protect the lower unit, without needing to buy an entirely new propeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 202SH be used as a spare part?\u003c\/strong\u003e Yes, since it is interchangeable with the Mercury Flo-Torq II hub system and fits Vortex and Apollo prop housings, the 202SH works well as a replacement or spare hub kit.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991273320667,"sku":"MIW-202SH","price":62.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit-202__69119.1722369679.500.750.jpg?v=1785188733"},{"product_id":"michigan-wheel-202-xhs-ii-drop-in-hub-kit-for-honda-bf-75-bf-90-outboards-1995-1998","title":"Michigan Wheel 202 XHS II Drop-In Hub Kit for Honda BF75 \u0026 BF90 HP Outboards (1995-1998)","description":"\u003cp\u003eThe Michigan Wheel 202 is an XHS II Xchangeable Hub Kit, a drop-in replacement hub system built for the Vortex and Apollo prop housings. At its core is a Delrin cushioned sleeve that absorbs the impact and torque stress created every time the outboard shifts gears. This cushioning is designed to let the hub spin under significant impact loads, protecting the lower unit's gearcase from shock damage that a solid hub could transfer straight through the driveline. Because the exchangeable hub system separates the wear component from the propeller blade assembly, a worn or spun hub can be replaced on its own rather than requiring a full propeller replacement, making the 202 a practical option for a spare or service part.\u003c\/p\u003e\u003cp\u003eThe XHS II hub design is interchangeable with Mercury's Flo-Torq II hub system, so it fits propellers and hardware engineered around that hub standard. For Honda outboard applications, Michigan Wheel specifies Kit #202 for BF 75 HP and BF 90 HP engines built for the 1995-1998 model years; Honda BF 75\/90 engines from 1999 and newer, along with BFP 60, BF 115, and BF 130 HP engines from 1998 and newer, use the different Kit #207 instead, so confirming the engine year and horsepower before ordering is important to get the correct hub kit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 202\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e XHS II Xchangeable Hub Kit (Drop-In Hub)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Material:\u003c\/strong\u003e Delrin cushioned sleeve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Prop Housings:\u003c\/strong\u003e Vortex and Apollo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub System Interchange:\u003c\/strong\u003e Mercury Flo-Torq II compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 6 x 3 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Brushed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eHonda BF 75 HP and BF 90 HP outboards, 1995-1998 engine applications\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eNote: this kit may interfere with a trim tab on some installations; check clearance before final installation.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Michigan Wheel 202 hub kit fit?\u003c\/strong\u003e The Michigan Wheel 202 XHS II hub kit is specified for Honda BF 75 HP and BF 90 HP outboards from the 1995-1998 engine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 202 kit work on newer Honda BF 75 and BF 90 outboards?\u003c\/strong\u003e No. Honda BF 75 and BF 90 HP engines from 1999 and newer use Michigan Wheel Kit #207 instead of the 202.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 202 hub kit the right choice for a Honda BFP 60, BF 115, or BF 130?\u003c\/strong\u003e No, those engines from 1998 and newer use Kit #207 rather than the 202, which is built for the earlier Honda BF 75\/90 application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat prop housings is the XHS II 202 hub kit designed for?\u003c\/strong\u003e The 202 hub kit is designed for use with Vortex and Apollo prop housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Michigan Wheel 202 hub compatible with Mercury's hub system?\u003c\/strong\u003e Yes, the XHS II hub in Kit 202 is interchangeable with Mercury's Flo-Torq II hub system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hub made of and what does it do?\u003c\/strong\u003e It uses a Delrin cushioned sleeve that absorbs the impact and stress created when the outboard shifts gears, and it is designed to spin under significant impact to protect the lower unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Michigan Wheel 202 hub kit weigh?\u003c\/strong\u003e The 202 hub kit weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 202 hub kit?\u003c\/strong\u003e The Michigan Wheel 202 measures 6 x 3 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hub kit be installed without replacing the whole propeller?\u003c\/strong\u003e Yes, the XHS II system is an exchangeable hub design, so the Michigan Wheel 202 hub can be replaced on its own without needing a full propeller replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I choose a drop-in hub kit like the 202 instead of a solid hub?\u003c\/strong\u003e A drop-in hub kit like the 202 uses a cushioned sleeve that can spin under shock loads, which helps protect the gearcase from impact damage in a way a solid, non-cushioned hub cannot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there any installation clearance issues with the 202 hub kit?\u003c\/strong\u003e Yes, the Michigan Wheel 202 may interfere with a trim tab on some installations, so clearance should be checked during fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Michigan Wheel 202 a genuine manufacturer part?\u003c\/strong\u003e Yes, the 202 is a genuine Michigan Wheel XHS II hub kit identified by manufacturer part number 202.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991273484507,"sku":"MIW-202","price":55.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit-202__77695.1722493281.500.750.jpg?v=1785188086"},{"product_id":"michigan-wheel-209-xhs-ii-xchangeable-hub-kit-for-nissan-tohatsu-v4-outboards-90-140-hp-flo-torq-ii-interchangeable","title":"Michigan Wheel 209 XHS II Hub Kit for Nissan\/Tohatsu V4 Outboards, 90-140 HP","description":"\u003cp\u003eThe Michigan Wheel 209 is an XHS II Xchangeable Hub Propeller Series hub kit built for boaters running Nissan or Tohatsu V4 gearcase outboards rated 90-140 HP. The kit centers on a Delrin cushioned sleeve that absorbs the impact and stress created every time the gears shift, and it is engineered to spin under significant impact so that force is dissipated at the hub rather than transmitted into the lower unit. This exchangeable-hub design means the hub itself can be replaced independently of the propeller, which is a practical advantage for boaters who run their prop hard or shift frequently.\u003c\/p\u003e\u003cp\u003eThe 209 hub kit is sized for Vortex and Apollo prop housings, and it is also interchangeable with Mercury's Flo-Torq II hub system, giving owners of compatible propellers a wider range of hub options when it comes time to service or replace a worn hub. It is a straightforward choice whether you are rebuilding a prop you already own or keeping a spare hub kit on hand for a Nissan\/Tohatsu V4 outboard setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 209\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e XHS II (Xchangeable Hub Propeller Series)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Outboard Brand:\u003c\/strong\u003e Nissan\/Tohatsu\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Gearcase:\u003c\/strong\u003e V4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower Range:\u003c\/strong\u003e 90-140 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProp Housing Compatibility:\u003c\/strong\u003e Vortex and Apollo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub System Compatibility:\u003c\/strong\u003e Interchangeable with Mercury Flo-Torq II hub system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSleeve Material:\u003c\/strong\u003e Delrin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.37 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5.5 x 2.75 x 2.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014984016421\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNissan\/Tohatsu V4 Gearcase outboards, 90-140 HP\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards does the Michigan Wheel 209 hub kit fit?\u003c\/strong\u003e The Michigan Wheel 209 XHS II hub kit is designed for Nissan\/Tohatsu V4 gearcase outboards rated 90-140 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat prop housings work with the 209 hub kit?\u003c\/strong\u003e This hub kit is designed for use with Vortex and Apollo prop housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Michigan Wheel 209 compatible with Mercury Flo-Torq II hubs?\u003c\/strong\u003e Yes, the Michigan Wheel 209 XHS II hub kit is interchangeable with Mercury's Flo-Torq II hub system, so it can be used in place of a Flo-Torq II hub on a compatible prop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the cushioning sleeve made of?\u003c\/strong\u003e The 209 hub kit uses a Delrin cushioned sleeve to absorb the impact and stress caused by shifting gears.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Michigan Wheel 209 hub kit weigh?\u003c\/strong\u003e The Michigan Wheel 209 XHS II hub kit weighs 1.37 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 209 hub kit?\u003c\/strong\u003e The product measures 5.5 x 2.75 x 2.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the XHS II hub kit protect against?\u003c\/strong\u003e The Delrin sleeve in the 209 hub kit is designed to spin under significant impact, absorbing shifting stress so the outboard's lower unit is protected from damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 209 an exchangeable hub design?\u003c\/strong\u003e Yes, the Michigan Wheel 209 is part of the XHS II Xchangeable Hub Propeller Series, meaning the hub can be replaced independently of the propeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 209 hub kit be used as a spare?\u003c\/strong\u003e Yes, boaters running Nissan\/Tohatsu V4 outboards in the 90-140 HP range commonly keep the 209 XHS II hub kit on hand as a spare or replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Michigan Wheel 209 hub kit?\u003c\/strong\u003e The UPC for the Michigan Wheel 209 XHS II hub kit is 014984016421.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991273517275,"sku":"MIW-209","price":53.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__06949.1722503182.500.750.jpg?v=1785187983"},{"product_id":"michigan-wheel-207-xhs-ii-drop-in-hub-kit-oem-991207-honda-outboard-bfp-60-bf-115-bf-130-bf-75-bf-90-1998-newer","title":"Michigan Wheel 207 XHS II Hub Kit - OEM 991207\/991205 - Fits Honda BFP60\/115\/130 HP 1998+, BF75\/90 HP 1999+","description":"\u003cp\u003eThe Michigan Wheel 207 is an XHS II (Xchangeable Hub Series) replacement hub kit built to fit select Honda outboard propellers. It supplies the rubber, Delrin-cushioned sleeve that sits inside the propeller and absorbs the shock and stress created when the engine shifts gears. This cushioning is designed to let the hub spin under significant impact loads, protecting the lower unit's gearcase from damage if the propeller strikes debris or the bottom.\u003c\/p\u003e\u003cp\u003eKit 207 is built for the Vortex and Apollo prop housings and is interchangeable with Mercury's Flo-Torq II hub system, giving Vortex and Apollo prop owners a straightforward way to source a compatible hub without matching to a single OE part number. It is intended as a replacement hub for a worn or damaged original, or as a spare kept on board, and installs into the propeller's existing housing rather than requiring a full propeller replacement.\u003c\/p\u003e\u003cp\u003eFitment is specific to certain Honda outboard model years: use Kit 207 for Honda BFP 60, BF 115, and BF 130 HP engines from 1998 and newer, and for Honda BF 75 and BF 90 HP engines from 1999 and newer. Earlier BF 75 and BF 90 HP engines built 1995-1998 require the separate XHS II Kit 202 instead, so confirm the engine's model year before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 207\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Series:\u003c\/strong\u003e XHS II (Xchangeable Hub Series)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSleeve Material:\u003c\/strong\u003e Delrin-cushioned rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Prop Housings:\u003c\/strong\u003e Vortex and Apollo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-Compatible Hub System:\u003c\/strong\u003e Interchangeable with Mercury Flo-Torq II\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e 991207, 991205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHonda BFP 60, BF 115, BF 130 HP outboards, 1998 and newer\u003c\/li\u003e\n\u003cli\u003eHonda BF 75, BF 90 HP outboards, 1999 and newer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e991207\u003c\/li\u003e\n\u003cli\u003e991205\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Michigan Wheel 207 hub kit used for?\u003c\/strong\u003e Kit 207 is an XHS II replacement hub that fits inside a compatible Vortex or Apollo propeller housing, providing the Delrin-cushioned rubber sleeve that absorbs shifting shock and protects the outboard's lower unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Honda outboards does part 207 fit?\u003c\/strong\u003e Part 207 fits Honda BFP 60, BF 115, and BF 130 HP outboards from 1998 and newer, and Honda BF 75 and BF 90 HP outboards from 1999 and newer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes kit 207 fit older Honda BF 75 and BF 90 HP engines?\u003c\/strong\u003e No. Honda BF 75 and BF 90 HP engines built from 1995 to 1998 require Michigan Wheel's XHS II Kit 202 instead; Kit 207 is for the 1999-and-newer versions of those engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the Michigan Wheel 207 cross-reference?\u003c\/strong\u003e The 207 hub kit is the OEM equivalent of part numbers 991207 and 991205.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Michigan Wheel 207 hub compatible with Mercury propellers?\u003c\/strong\u003e Yes, Kit 207 is designed to be interchangeable with Mercury's Flo-Torq II hub system, in addition to fitting Vortex and Apollo prop housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 207 hub kit's sleeve made from?\u003c\/strong\u003e The cushioning sleeve in Kit 207 is Delrin-cushioned rubber, chosen to absorb the impact and stress created when the engine shifts gears.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Michigan Wheel 207 hub kit weigh?\u003c\/strong\u003e The Michigan Wheel 207 XHS II hub kit weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I replace the hub instead of the whole propeller?\u003c\/strong\u003e Because the hub kit's rubber sleeve is the component designed to absorb shifting shock and impact, a worn or damaged hub can be swapped out on its own using Kit 207 rather than replacing the entire Vortex or Apollo propeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Kit 207 be used as a spare part on board?\u003c\/strong\u003e Yes, many owners keep a Michigan Wheel 207 hub kit as a spare so a damaged hub can be replaced without needing a full replacement propeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Michigan Wheel 207 an OEM or aftermarket part?\u003c\/strong\u003e The 207 is a Michigan Wheel aftermarket hub kit built as a direct equivalent to OEM parts 991207 and 991205 for the specified Honda outboard applications.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991273550043,"sku":"MIW-207","price":55.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__78128.1722361017.500.750.jpg?v=1785189216"},{"product_id":"michigan-wheel-206-xhs-ii-propeller-hub-kit-evinrude-johnson-omc-cobra-sterndrive-v4-gearcase-13-tooth-spline","title":"Michigan Wheel 206 XHS II Hub Kit for OMC\/Cobra Model 400 Sterndrives, 13 Tooth Spline","description":"\u003cp\u003eThe Michigan Wheel 206 is an XHS II Xchangeable Hub Kit built for OMC\/Cobra Model 400 sterndrives with a 13 tooth spline gearcase. The kit uses a Delrin cushioned sleeve that absorbs the impact and stress created every time the drive shifts gears, and is designed to spin under significant impact so the lower unit is protected from shock loading rather than the gearcase itself. It is built for use with Vortex and Apollo prop housings, and the hub design is interchangeable with Mercury's Flo-Torq II hub system, which makes it a practical choice for boaters running mixed prop inventories or keeping a spare on board.\u003c\/p\u003e\u003cp\u003eAs an exchangeable hub system, the 206 lets the same prop housing be reused across compatible gearcases by swapping in the correct hub kit for the spline count and drive, rather than requiring a completely different propeller. This keeps replacement costs down when a hub wears out or needs to be matched to a different sterndrive. The kit ships as a complete, ready-to-install hub assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 206\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e XHS II Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Delrin cushioned sleeve; rubber components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 5.5 inches x 2.75 inches x 2.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpline Count:\u003c\/strong\u003e 13 Tooth Spline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Prop Housings:\u003c\/strong\u003e Vortex, Apollo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub System Interchange:\u003c\/strong\u003e Interchangeable with Mercury Flo-Torq II hub system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014984016391\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOMC\/Cobra Model 400 Sterndrives, 13 Tooth Spline gearcase\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat gearcase does the Michigan Wheel 206 hub kit fit?\u003c\/strong\u003e The Michigan Wheel 206 is built for OMC\/Cobra Model 400 sterndrives with a 13 tooth spline gearcase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat prop housings work with this hub kit?\u003c\/strong\u003e The 206 hub kit is designed for use with Vortex and Apollo prop housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 206 hub kit compatible with Mercury propellers?\u003c\/strong\u003e Yes, the hub design is interchangeable with Mercury's Flo-Torq II hub system, so it can be used as an alternative in that hub family.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Michigan Wheel 206 hub made from?\u003c\/strong\u003e It uses a Delrin cushioned sleeve along with rubber components to absorb shifting impact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 206 hub kit weigh?\u003c\/strong\u003e The Michigan Wheel 206 XHS II Hub Kit weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the hub kit?\u003c\/strong\u003e The 206 measures 5.5 inches deep by 2.75 inches wide by 2.75 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the hub need to absorb impact?\u003c\/strong\u003e The Delrin cushioned sleeve in the 206 hub kit spins under significant impact during gear shifts, protecting the lower unit from shock loads that would otherwise transfer directly into the gearcase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete hub kit or just a bushing?\u003c\/strong\u003e The Michigan Wheel 206 is sold as a complete exchangeable hub kit, not just an individual bushing component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 206 hub kit come with a warranty?\u003c\/strong\u003e Michigan Wheel covers the 206 hub kit's bushing components with a 1-year limited warranty against defects in material or workmanship from the date of purchase, with proof of purchase required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat spline count does part number 206 use?\u003c\/strong\u003e Part number 206 is specified with a 13 tooth spline for OMC\/Cobra Model 400 sterndrives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hub kit be swapped between different props?\u003c\/strong\u003e Yes, as an exchangeable hub system, the 206 hub allows the same prop housing to be reused by swapping in the correct hub kit for the gearcase it needs to match.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991274074331,"sku":"MIW-206","price":55.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__04025.1722498419.500.750.jpg?v=1785188411"},{"product_id":"michigan-wheel-205-xhs-ii-hub-kit-for-volvo-sx-cobra-sx-sterndrives-19-tooth-spline-1994-present-flo-torq-ii-interchangeable","title":"Michigan Wheel 205 XHS II Xchangeable Hub Kit, 19-Tooth Spline, for Volvo SX Sterndrive and Cobra SX Drives","description":"\u003cp\u003eThe Michigan Wheel 205 is an XHS II Xchangeable Hub Kit built to absorb the shock and stress that shifting gears puts on a propeller and lower unit. At the core of the kit is a Delrin cushioned sleeve that is designed to spin under significant impact, protecting the gearcase from damage during hard or repeated gear engagement. This makes it a practical choice both as a factory replacement and as a spare kept on board.\u003c\/p\u003e\u003cp\u003eThe 205 hub kit is engineered for use with Vortex and Apollo prop housings and is interchangeable with Mercury's Flo-Torq II hub system, giving boat owners flexibility when sourcing replacement parts. It carries a 19-tooth spline and is compatible with Volvo SX Sterndrives, 1994 to present. It also fits Cobra SX drives paired with 3.0 L (130 HP), 4.3 L (205 HP), 5.0 L (205 HP), and 5.7 L (260 HP) EST\/PSR\/YEMS engines, 1989 to 1993. For engines rated 300 HP or higher, Michigan Wheel specifies its High Horsepower Sleeve in place of the standard 205 sleeve. The hub is ambidextrous, working with standard prop rotation, and the kit ships in a black finish, one hub kit per package.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Propeller Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber (Delrin cushioned sleeve)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5.5 x 3 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpline:\u003c\/strong\u003e 19-Tooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Prop Housings:\u003c\/strong\u003e Vortex, Apollo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchangeable Hub System:\u003c\/strong\u003e Mercury Flo-Torq II\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand Orientation:\u003c\/strong\u003e Ambidextrous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014984016384\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 hub kit per package\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVolvo SX Sterndrive, 19-Tooth Spline, 1994 to present\u003c\/li\u003e\n\u003cli\u003eCobra SX drive, 3.0 L (130 HP) EST\/PSR, 1989-1993\u003c\/li\u003e\n\u003cli\u003eCobra SX drive, 4.3 L (205 HP) EST\/PSR\/YEMS, 1989-1993\u003c\/li\u003e\n\u003cli\u003eCobra SX drive, 5.0 L (205 HP) EST\/PSR\/YEMS, 1989-1993\u003c\/li\u003e\n\u003cli\u003eCobra SX drive, 5.7 L (260 HP) EST\/PSR\/YEMS, 1989-1993\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Michigan Wheel 205 hub kit?\u003c\/strong\u003e The kit includes a Delrin cushioned sleeve designed to absorb the shock of gear shifts and protect the lower unit, packaged one hub kit per unit in a black finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich sterndrives does the Michigan Wheel 205 hub kit fit?\u003c\/strong\u003e It fits Volvo SX Sterndrives with a 19-tooth spline, 1994 to present, as well as Cobra SX drives paired with 3.0 L, 4.3 L, 5.0 L, and 5.7 L EST\/PSR\/YEMS engines from 1989 to 1993.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 205 hub kit interchangeable with Mercury parts?\u003c\/strong\u003e Yes, the Michigan Wheel 205 XHS II hub kit is interchangeable with Mercury's Flo-Torq II hub system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat prop housings work with this hub kit?\u003c\/strong\u003e The 205 hub kit is designed for use with Vortex and Apollo prop housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 205 hub kit weigh?\u003c\/strong\u003e The Michigan Wheel 205 hub kit weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the sleeve made of?\u003c\/strong\u003e It uses a Delrin cushioned sleeve, a rubber-type material designed to spin under significant impact and absorb the stress of shifting gears.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 205 hub kit fit engines rated over 300 HP?\u003c\/strong\u003e No. For engines rated 300 HP or higher, Michigan Wheel specifies a High Horsepower Sleeve in place of the standard sleeve used in the 205 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Michigan Wheel 205 hub kit?\u003c\/strong\u003e It is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the hub kit?\u003c\/strong\u003e The Michigan Wheel 205 hub kit measures 5.5 x 3 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the hub orientation matter for installation?\u003c\/strong\u003e No, the Michigan Wheel 205 hub kit has an ambidextrous design, so it is not handed for a specific rotation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 205 kit be used as a spare part?\u003c\/strong\u003e Yes, the Michigan Wheel 205 XHS II hub kit is commonly kept on board as a spare or used as a direct replacement kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat spline size does the 205 hub kit use?\u003c\/strong\u003e The Michigan Wheel 205 hub kit uses a 19-tooth spline.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991274172635,"sku":"MIW-205","price":55.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__84861.1722356288.500.750.jpg?v=1785188440"},{"product_id":"michigan-wheel-208-xhs-ii-hub-kit-yamaha-v4-outboard-50-100-hp-incl-4-stroke-1984-present-15-tooth-spline-flo-torq-ii-interchangeable","title":"Michigan Wheel 208 XHS II Hub Kit for Yamaha V4 Outboard Gearcases, 50-100 HP","description":"\u003cp\u003eThe Michigan Wheel 208 XHS II Hub Kit is an exchangeable propeller hub system built for Yamaha V4 outboard gearcases in the 50-100 HP range, including 4-stroke models, 1984-present, using a 15 tooth spline with a spline front washer. The kit centers on a Delrin cushioned sleeve that absorbs the impact and stress of shifting gears, and it is engineered to spin under significant impact loads so the propeller protects the lower unit rather than transmitting shock through the drivetrain. It is built for use with Vortex and Apollo prop housings, giving boat owners a hub solution that works across Michigan Wheel's exchangeable hub propeller lineup rather than being locked to a single prop model.\u003c\/p\u003e\u003cp\u003eBecause the XHS II hub design is interchangeable with Mercury's Flo-Torq II hub system, the 208 kit gives owners flexibility when sourcing a replacement or spare prop hub for compatible gearcases. The aluminum housing is finished in a brushed finish for corrosion resistance and a clean appearance. This makes the 208 a practical choice for boaters who need to service or replace a worn hub kit without replacing the entire propeller.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 208\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e XHS II Xchangeable Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Engine:\u003c\/strong\u003e Yamaha V4 Outboard Gearcases\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower Range:\u003c\/strong\u003e 50-100 HP (Including 4-Stroke)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Years:\u003c\/strong\u003e 1984-Present\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpline:\u003c\/strong\u003e 15 Tooth Spline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWasher Type:\u003c\/strong\u003e Spline Front Washer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Prop Housings:\u003c\/strong\u003e Vortex and Apollo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchangeable With:\u003c\/strong\u003e Mercury's Flo-Torq II hub system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSleeve Material:\u003c\/strong\u003e Delrin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Brushed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014984016414\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eYamaha V4 Outboard Gearcases, 50-100 HP (Including 4-Stroke), 1984-Present, 15 Tooth Spline, Spline Front Washer\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Michigan Wheel 208 hub kit used for?\u003c\/strong\u003e The Michigan Wheel 208 is an XHS II exchangeable hub kit that fits inside a Vortex or Apollo propeller housing on Yamaha V4 outboard gearcases, letting the prop absorb shifting shock instead of the lower unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich engines does part number 208 fit?\u003c\/strong\u003e Part 208 is designed for Yamaha V4 outboard gearcases rated 50-100 HP, including 4-stroke models, 1984-present, using a 15 tooth spline with a spline front washer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat horsepower range is the 208 hub kit rated for?\u003c\/strong\u003e 50-100 HP (including 4-stroke engines) is the rated range for the Michigan Wheel 208 hub kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Michigan Wheel 208 compatible with Mercury propellers?\u003c\/strong\u003e Yes, the 208 XHS II hub kit is interchangeable with Mercury's Flo-Torq II hub system, so it can be used as a replacement in applications built around that hub design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Michigan Wheel 208 hub kit made from?\u003c\/strong\u003e The 208 hub kit has an aluminum housing with a brushed finish, paired with a Delrin cushioned sleeve inside.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Delrin sleeve in the 208 kit do?\u003c\/strong\u003e The Delrin cushioned sleeve in the Michigan Wheel 208 absorbs the impact and stress created when the outboard shifts gears, and it is designed to spin under heavy impact to protect the lower unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Michigan Wheel 208 hub kit weigh?\u003c\/strong\u003e The Michigan Wheel 208 hub kit weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 208 hub kit work with any propeller housing?\u003c\/strong\u003e No, the Michigan Wheel 208 is built for use specifically with Vortex and Apollo prop housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tooth spline count does the 208 hub kit use?\u003c\/strong\u003e The Michigan Wheel 208 uses a 15 tooth spline configuration with a spline front washer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Michigan Wheel 208 a genuine Michigan Wheel part?\u003c\/strong\u003e Yes, 208 is Michigan Wheel's own public part number for this XHS II hub kit, not a third-party clone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat years does the Michigan Wheel 208 cover?\u003c\/strong\u003e The Michigan Wheel 208 is listed for model years 1984-present on the applicable Yamaha V4 gearcases.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 208 hub kit be used as a spare or replacement prop hub?\u003c\/strong\u003e Yes, the Michigan Wheel 208 XHS II hub kit is intended as both a replacement hub and a spare for compatible Yamaha V4 outboard setups.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991274303707,"sku":"MIW-208","price":55.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__12295.1722498964.500.750.jpg?v=1785188734"},{"product_id":"michigan-wheel-211-xhs-xchangeable-hub-kit-for-evinrude-johnson-40-70-hp-13-spline-3-3-8-gearcase","title":"Michigan Wheel 211 XHS Hub Kit for Evinrude\/Johnson 40-70 HP, 13-Spline 3-3\/8 Inch Gearcase","description":"\u003cp\u003eThe Michigan Wheel 211 is an XHS Xchangeable Hub Kit built for Evinrude and Johnson outboards with a 13-spline, 3-3\/8 inch gearcase, matching the 40-70 HP power range. It is designed for use with Vortex and Apollo prop housings, letting you convert a compatible propeller to the XHS interchangeable hub system rather than replacing the whole prop when the hub wears out.\u003c\/p\u003e\u003cp\u003eAt the core of the kit is a Delrin cushioned sleeve that absorbs the impact and torsional stress created every time the outboard shifts gears. The sleeve is engineered to spin under significant impact loads, which protects the gearcase, shaft, and lower unit from shock damage that would otherwise be transmitted straight through a solid hub. This makes the 211 a practical choice both as a replacement hub for a worn-out kit and as an upgrade for boaters who want a shock-absorbing buffer built into their prop setup.\u003c\/p\u003e\u003cp\u003eBecause the XHS system is exchangeable, the 211 hub kit works with the Vortex and Apollo prop housings across the 40-70 HP Evinrude\/Johnson lineup that uses the 13-spline, 3-3\/8 inch gearcase, without requiring a full prop swap.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 211\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e XHS Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Engine Brand:\u003c\/strong\u003e Evinrude\/Johnson\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower Range:\u003c\/strong\u003e 40-70 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpline Count:\u003c\/strong\u003e 13-spline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGearcase Diameter:\u003c\/strong\u003e 3-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Prop Housings:\u003c\/strong\u003e Vortex, Apollo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Sleeve Material:\u003c\/strong\u003e Delrin (cushioned)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Brushed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5 x 2.25 x 2.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014984024709\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvinrude\/Johnson outboards, 40-70 HP\u003c\/li\u003e\n\u003cli\u003e13-spline, 3-3\/8 inch gearcase\u003c\/li\u003e\n\u003cli\u003eVortex and Apollo prop housings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Michigan Wheel 211 XHS Hub Kit fit?\u003c\/strong\u003e The 211 is designed for Evinrude\/Johnson outboards in the 40-70 HP range that use a 13-spline, 3-3\/8 inch gearcase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich prop housings work with this hub kit?\u003c\/strong\u003e The Michigan Wheel 211 is built for use with Vortex and Apollo prop housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the hub sleeve made from?\u003c\/strong\u003e A Delrin cushioned sleeve makes up the impact-absorbing hub in the 211 kit, chosen for its ability to spin under significant impact loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need an exchangeable hub kit instead of a new propeller?\u003c\/strong\u003e An XHS hub kit like the 211 lets you replace just the worn or damaged hub inside a compatible Vortex or Apollo propeller instead of buying an entirely new prop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 211 hub kit weigh?\u003c\/strong\u003e The Michigan Wheel 211 XHS Hub Kit weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 211 hub kit?\u003c\/strong\u003e Product dimensions for the 211 hub kit are 5 x 2.25 x 2.25 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 211 hub kit include the OEM attachment hardware?\u003c\/strong\u003e No. All OEM attachment hardware must be removed from the existing setup before installing the XHS 211 hub kit, and the shaft taper must be visible during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 211 hub kit a universal fit or specific to one gearcase size?\u003c\/strong\u003e It is specific: the 211 is sized for a 13-spline, 3-3\/8 inch Evinrude\/Johnson gearcase rather than a one-size-fits-all fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat protects the lower unit when using this hub kit?\u003c\/strong\u003e The Delrin cushioned sleeve in the Michigan Wheel 211 absorbs the shifting impact and is designed to spin under heavy load, shielding the lower unit from shock damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Michigan Wheel 211 a genuine Michigan Wheel part?\u003c\/strong\u003e Yes, the 211 XHS Hub Kit is manufactured by Michigan Wheel as part of its XHS Xchangeable Hub Propeller Series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat horsepower range is the 211 hub kit rated for?\u003c\/strong\u003e It is rated for Evinrude\/Johnson outboards in the 40-70 HP range.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991274336475,"sku":"MIW-111","price":43.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__02428.1722507988.500.750.jpg?v=1785189084"},{"product_id":"michigan-wheel-xhs-interchangeable-propeller-hub-kit-for-nissan-tohatsu-50-70-hp-outboards-mpn-212","title":"Michigan Wheel 212 Propeller Hub Kit for Nissan\/Tohatsu 50-70 HP Outboards","description":"\u003cp\u003eThe Michigan Wheel 212 is a propeller hub kit engineered for Nissan and Tohatsu outboard motors in the 50-70 HP range. The hub kit contains the internal hub components that seat inside a compatible propeller, allowing the propeller to mount correctly on the outboard's propeller shaft. Because hub kits are matched to a specific exhaust configuration, it is important to confirm how your outboard exhausts before ordering. On a single exhaust setup, exhaust gas passes through the gearcase snout only, and the water intake is located on the propeller shaft center line. On a dual exhaust setup, exhaust passes through both the snout and the propeller itself, and the water intake is located on the strut rather than on the shaft center line. Matching the correct hub kit to your outboard's exhaust design and propeller shaft fitment helps ensure proper propeller operation and reliable exhaust flow. The Michigan Wheel 212 weighs 1.4 pounds as packaged. Always confirm your outboard's horsepower and exhaust configuration against the fitment details below before purchasing to make sure you order the correct hub kit for your Nissan or Tohatsu outboard.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 212\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Propeller Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Nissan\/Tohatsu 50-70 HP outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014984024716\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNissan\/Tohatsu outboards, 50-70 HP\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboard motors does the Michigan Wheel 212 hub kit fit?\u003c\/strong\u003e The Michigan Wheel 212 hub kit is built for Nissan and Tohatsu outboards in the 50-70 HP range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Michigan Wheel 212 fit a 40 HP or 90 HP Nissan or Tohatsu outboard?\u003c\/strong\u003e No, the 212 hub kit is designated for the 50-70 HP range only; horsepower outside that range is not covered by this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Michigan Wheel 212 a genuine Michigan Wheel part?\u003c\/strong\u003e Yes, part number 212 is a genuine Michigan Wheel propeller hub kit, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Michigan Wheel 212 hub kit weigh?\u003c\/strong\u003e It weighs 1.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Michigan Wheel 212 hub kit?\u003c\/strong\u003e The UPC for this hub kit is 014984024716.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between a single exhaust and dual exhaust hub kit configuration?\u003c\/strong\u003e On a single exhaust configuration, exhaust passes through the gearcase snout only and the water intake sits on the propeller shaft center line; on a dual exhaust configuration, exhaust passes through both the snout and the propeller, and the water intake is located on the strut instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to know my outboard's exhaust type before ordering a hub kit like the 212?\u003c\/strong\u003e Yes, because single exhaust and dual exhaust outboards use different hub arrangements, confirming your engine's exhaust configuration before ordering the Michigan Wheel 212 helps ensure correct fitment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I tell whether my outboard is single or dual exhaust by looking at the water intake?\u003c\/strong\u003e Yes, a water intake on the propeller shaft center line indicates a single exhaust design, while a water intake on the strut indicates a dual exhaust design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat part number should I reference when ordering this hub kit?\u003c\/strong\u003e Reference Michigan Wheel part number 212 when ordering this hub kit for a Nissan\/Tohatsu 50-70 HP outboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Michigan Wheel 212 hub kit compatible with outboard brands other than Nissan or Tohatsu?\u003c\/strong\u003e Fitment for the 212 hub kit is specified for Nissan\/Tohatsu 50-70 HP outboards; compatibility with other outboard brands is not specified.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991274533083,"sku":"MIW-112","price":43.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__55584.1722517710.500.750.jpg?v=1785188310"},{"product_id":"michigan-wheel-216-xhs-hub-kit-for-nissan-tohatsu-13-spline-3-1-4-gearcases-35-50-hp","title":"Michigan Wheel 216 XHS Hub Kit for Nissan\/Tohatsu 13-Spline, 3-1\/4 Inch Gearcases","description":"\u003cp\u003eThe Michigan Wheel 216 is an XHS Xchangeable Hub Kit built for Nissan and Tohatsu outboards with a 13-spline, 3-1\/4 inch gearcase. It is designed for use with Vortex and Apollo prop housings, making it the correct exchangeable hub for building a replacement or spare propeller on those housings rather than buying a new prop outright. At the core of the kit is a Delrin cushioned sleeve that sits between the prop hub and the gearcase spline. This sleeve absorbs the impact and torque loading that occurs every time the outboard shifts gears, and it is engineered to spin (slip) under a hard impact, such as striking submerged debris, to protect the lower unit, gear case, and drivetrain from shock damage.\u003c\/p\u003e\u003cp\u003eThe hub kit itself is rubber, with a brushed exterior finish on the exposed components, and measures 3-1\/4 inch (82.55 mm) to match the Nissan\/Tohatsu 13-spline gearcase diameter. Because the XHS system is exchangeable, the hub kit can be swapped into a compatible Vortex or Apollo prop housing rather than requiring the housing and hub to be purchased as one fixed assembly, which is useful for boat owners who already own a housing and need a replacement hub sleeve or a spare on hand. This is a hub kit only, intended to be installed into an existing or separately purchased Vortex\/Apollo prop housing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 216\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e XHS Xchangeable Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Gearcase:\u003c\/strong\u003e Nissan\/Tohatsu 13-Spline, 3-1\/4 Inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3-1\/4 inch (82.55 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCushion Sleeve Material:\u003c\/strong\u003e Delrin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Brushed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Prop Housings:\u003c\/strong\u003e Vortex and Apollo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014984024754\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Michigan Wheel 216 hub kit used for?\u003c\/strong\u003e The 216 is an XHS Xchangeable Hub Kit that fits inside a Vortex or Apollo prop housing to build a replacement or spare propeller for Nissan\/Tohatsu outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich gearcase does the 216 hub kit fit?\u003c\/strong\u003e It is sized for the Nissan\/Tohatsu 13-spline, 3-1\/4 inch gearcase, matching a hub diameter of 3-1\/4 inch (82.55 mm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the cushioning sleeve made of?\u003c\/strong\u003e The cushioned sleeve inside the Michigan Wheel 216 hub kit is Delrin, chosen for its ability to absorb repeated shifting impact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 216 hub kit protect the lower unit if I hit something submerged?\u003c\/strong\u003e Yes, the Delrin sleeve in the 216 is designed to spin (slip) under a hard impact so that shock is absorbed by the hub instead of being transmitted to the gearcase and lower unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 216 a complete propeller or just a hub component?\u003c\/strong\u003e The Michigan Wheel 216 is a hub kit only, meant to be installed into a compatible Vortex or Apollo prop housing rather than sold as a complete standalone propeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat prop housings is the 216 compatible with?\u003c\/strong\u003e This hub kit is designed for use with Vortex and Apollo prop housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the overall size of the 216 hub kit?\u003c\/strong\u003e The hub kit measures 3-1\/4 inch (82.55 mm), matching the 13-spline Nissan\/Tohatsu gearcase it is built for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Michigan Wheel 216 weigh?\u003c\/strong\u003e The 216 hub kit weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 216 hub kit have?\u003c\/strong\u003e It has a brushed exterior finish on the exposed hub components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 216 hub kit be used as a spare part?\u003c\/strong\u003e Yes, because the XHS system is exchangeable, the Michigan Wheel 216 is commonly kept as a spare hub kit for a Vortex or Apollo housing already in service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the hub kit itself made from?\u003c\/strong\u003e The Michigan Wheel 216 hub kit is made of rubber, with a Delrin cushioned sleeve at its core.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991274565851,"sku":"MIW-116","price":44.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__97612.1722511137.500.750.jpg?v=1785188511"},{"product_id":"michigan-wheel-210-xhs-ii-drop-in-hub-kit-for-suzuki-v4-gearcase-60-140-hp-outboards-flo-torq-ii-compatible","title":"Michigan Wheel XHS II Hub Kit 210 for Evinrude\/Johnson 60 HP \u0026 70 HP 4-Stroke Outboards, 1998 and Newer","description":"\u003cp\u003eThe Michigan Wheel XHS II Hub Kit 210 is a drop-in exchangeable hub kit designed for the XHS II Xchangeable Hub Propeller Series. At the core of the kit is a Delrin cushioned sleeve that absorbs the impact and stress generated by shifting gears, spinning under significant impact to protect the outboard's lower unit from damage. The hub kit is designed for use with Vortex and Apollo prop housings and is built to be interchangeable with Mercury's Flo-Torq II hub system, making it a practical choice for boaters who want a compatible replacement or spare hub without switching prop housing hardware.\u003c\/p\u003e\u003cp\u003eKit 210 is specifically intended for 60 HP and 70 HP 4-Stroke engine applications, 1998 and newer. Other engine applications use a different Michigan Wheel drop-in hub kit, so confirming the engine application before ordering ensures the correct hub kit reaches the boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 210\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e XHS II Drop-In Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Delrin cushioned sleeve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Prop Housings:\u003c\/strong\u003e Vortex, Apollo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub System Interchangeability:\u003c\/strong\u003e Mercury Flo-Torq II\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Application:\u003c\/strong\u003e 60 HP \u0026amp; 70 HP 4-Stroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Year:\u003c\/strong\u003e 1998 and newer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5.5 x 2.75 x 2.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.51 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eEvinrude, Johnson 60 HP \u0026amp; 70 HP 4-Stroke engines, 1998 and newer\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers listed\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Michigan Wheel Hub Kit 210 fit?\u003c\/strong\u003e Hub Kit 210 is built for Evinrude and Johnson 60 HP and 70 HP 4-Stroke outboard engines, 1998 and newer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill Kit 210 work on other engine applications?\u003c\/strong\u003e No. Part number 210 is specifically for 60 HP and 70 HP 4-Stroke applications from 1998 and newer; other engine applications require a different Michigan Wheel drop-in hub kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hub sleeve made of?\u003c\/strong\u003e The XHS II Hub Kit 210 uses a Delrin cushioned sleeve that absorbs the impact and stress caused by shifting gears.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a drop-in style hub kit?\u003c\/strong\u003e Yes, Michigan Wheel Hub Kit 210 is a drop-in hub kit from the XHS II Xchangeable Hub Propeller Series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat prop housings is Hub Kit 210 designed for?\u003c\/strong\u003e It is designed for use with Vortex and Apollo prop housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Hub Kit 210 compatible with Mercury's hub system?\u003c\/strong\u003e Yes, Michigan Wheel Hub Kit 210 is designed to be interchangeable with Mercury's Flo-Torq II hub system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of Hub Kit 210?\u003c\/strong\u003e The kit measures 5.5 x 2.75 x 2.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Michigan Wheel Hub Kit 210 weigh?\u003c\/strong\u003e It weighs 1.51 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the hub kit protect the lower unit?\u003c\/strong\u003e Yes. The Delrin cushioned sleeve in Hub Kit 210 is designed to spin under significant impact, protecting the outboard's lower end unit from shifting-related shock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Hub Kit 210 be used as a spare or replacement hub?\u003c\/strong\u003e Yes, the XHS II Hub Kit 210 is designed as a replacement or spare hub for compatible Vortex and Apollo prop housings.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991274631387,"sku":"MIW-210","price":55.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__25001.1722498177.500.750.jpg?v=1785189026"},{"product_id":"michigan-wheel-222-xhs-xchangeable-hub-kit-nissan-tohatsu-mercury-mariner-sea-ray-10-spline-3-gearcase","title":"Michigan Wheel 222 Delrin Prop Hub Kit - Nissan\/Tohatsu, Mercury\/Mariner\/Sea Ray 10-Spline 3 Inch Gearcase","description":"\u003cp\u003eThe Michigan Wheel 222 is a Delrin cushioned hub kit built for the Xchangeable Hub Series (XHS) propeller system, designed for use with Vortex and Apollo prop housings. The Delrin cushion sleeve absorbs the impact and stress created during gear shifting, and it is engineered to spin under significant impact loads to protect the lower unit's gearcase from damage. This exchangeable hub design lets boat owners rebuild a worn prop hub rather than replace the entire propeller, making the 222 a practical choice for a replacement hub or as a spare kept on board.\u003c\/p\u003e\u003cp\u003eThe kit is built for 10-spline, 3 inch gearcases and fits Nissan\/Tohatsu outboards as well as Mercury, Mariner, and Sea Ray outboards using this same spline and gearcase size. The Mercury\/Mariner application corresponds to 25-30 HP outboards. Each kit includes the Delrin cushion hub itself along with a forward thrust washer and aft drive adapter needed to complete the hub rebuild.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 222\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Propeller Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCushion Hub Material:\u003c\/strong\u003e Delrin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpline Count:\u003c\/strong\u003e 10-spline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGearcase Size:\u003c\/strong\u003e 3 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProp Housing Compatibility:\u003c\/strong\u003e Vortex and Apollo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Components:\u003c\/strong\u003e Forward Thrust Washer, Aft Drive Adapter, Delrin Cushion Hub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.92 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5 x 2.25 x 2.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014984024815\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan\/Tohatsu outboards, 10 spline, 3 inch gearcase\u003c\/li\u003e\n\u003cli\u003eMercury\/Mariner\/Sea Ray outboards, 10 spline, 3 inch gearcase (Mercury\/Mariner: 25-30 HP)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards does the Michigan Wheel 222 hub kit fit?\u003c\/strong\u003e The 222 fits Nissan and Tohatsu outboards, as well as Mercury, Mariner, and Sea Ray outboards, all using a 10-spline, 3 inch gearcase. On Mercury\/Mariner outboards it corresponds to the 25-30 HP range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the cushion hub in the 222 kit urethane or Delrin?\u003c\/strong\u003e The Michigan Wheel 222 uses a Delrin cushion hub, not urethane. The urethane version of this hub is sold under a different part number for a separate application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the 222 hub kit?\u003c\/strong\u003e The kit includes the Delrin cushion hub, a forward thrust washer, and an aft drive adapter needed to rebuild the propeller hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat prop housings is the 222 hub kit designed for?\u003c\/strong\u003e This hub kit is designed for use with Vortex and Apollo prop housings as part of Michigan Wheel's exchangeable hub system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Michigan Wheel 222 hub kit weigh?\u003c\/strong\u003e The 222 hub kit weighs 0.92 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 222 hub kit?\u003c\/strong\u003e The product measures 5 x 2.25 x 2.25 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the hub have a Delrin cushion instead of a solid connection?\u003c\/strong\u003e The Delrin cushion sleeve in the 222 kit absorbs the impact and stress caused by shifting gears and is designed to spin under significant impact, protecting the outboard's lower unit from damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 222 kit to rebuild a worn propeller hub instead of buying a new prop?\u003c\/strong\u003e Yes, the 222 is an exchangeable hub kit that lets you replace just the worn hub components rather than the entire propeller, and it also works well as a spare kept on board.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 222 hub kit fit a 10-spline or different spline count?\u003c\/strong\u003e The Michigan Wheel 222 is built specifically for 10-spline, 3 inch gearcases.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 222 hub kit compatible with Sea Ray outboards?\u003c\/strong\u003e Yes, the 222 fits Sea Ray outboards that use a 10-spline, 3 inch gearcase, in addition to Nissan, Tohatsu, Mercury, and Mariner outboards with the same spline and gearcase size.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991274729691,"sku":"MIW-122","price":43.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__31644.1722356357.500.750.jpg?v=1785189192"},{"product_id":"michigan-wheel-225-xhs-ii-xchangeable-hub-kit-for-suzuki-johnson-15-spline-4-1-4-gearcase-90-115-hp-4-stroke","title":"Michigan Wheel 225 XHS II Hub Kit for Suzuki\/Johnson 15-Spline, 4-1\/4 Inch Gearcase, 90-115 HP 4-Stroke","description":"\u003cp\u003eThe Michigan Wheel 225 is an XHS II Xchangeable Hub Kit built to fit the Suzuki\/Johnson 15-spline, 4-1\/4 inch gearcase used on 90-115 HP 4-stroke outboards. The kit's Delrin cushioned sleeve absorbs the impact and stress generated when the engine shifts gears, and it is designed to spin under significant impact so the load is taken up by the hub rather than transmitted into the lower unit, helping protect the gearcase from shock damage.\u003c\/p\u003e\u003cp\u003eThis hub kit is built for use with Vortex and Apollo prop housings and is interchangeable with Mercury's Flo-Torq II hub system, so it works as a drop-in replacement or spare hub wherever a Flo-Torq II style hub is specified for this gearcase. It is a practical choice for boat owners who need to replace a worn or damaged hub, keep a spare on board, or standardize their prop hardware around a single interchangeable hub system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 225\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e XHS II Xchangeable Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Gearcase:\u003c\/strong\u003e Suzuki\/Johnson 15-Spline, 4-1\/4 inch Gearcase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Application:\u003c\/strong\u003e 90-115 HP 4-Stroke (Suzuki\/Johnson)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Prop Housings:\u003c\/strong\u003e Vortex, Apollo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchangeable Hub System:\u003c\/strong\u003e Mercury Flo-Torq II\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCushioning Material:\u003c\/strong\u003e Delrin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.48 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5.5 x 2.75 x 2.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014984016445\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuzuki\/Johnson 15-Spline, 4-1\/4 inch Gearcase\u003c\/li\u003e\n\u003cli\u003e90-115 HP 4-Stroke outboards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Michigan Wheel 225 XHS II Hub Kit used for?\u003c\/strong\u003e It is a propeller hub kit that replaces the exchangeable hub inside a compatible prop housing, using a Delrin cushioned sleeve to absorb shifting impact for Suzuki\/Johnson 15-spline, 4-1\/4 inch gearcase applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes part number 225 fit Suzuki and Johnson outboards?\u003c\/strong\u003e Yes, the Michigan Wheel 225 hub kit is built for the Suzuki\/Johnson 15-spline, 4-1\/4 inch gearcase, sized for 90-115 HP 4-stroke outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many splines does the gearcase for this hub kit have?\u003c\/strong\u003e The 225 hub kit is designed for a 15-spline, 4-1\/4 inch gearcase on Suzuki\/Johnson outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Michigan Wheel 225 hub kit interchangeable with Mercury's Flo-Torq II system?\u003c\/strong\u003e Yes, the XHS II hub in part number 225 is designed to be interchangeable with Mercury's Flo-Torq II hub system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the cushioned sleeve in the 225 hub kit made from?\u003c\/strong\u003e The cushioned sleeve in the Michigan Wheel 225 XHS II Hub Kit is made from Delrin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat horsepower range is the Michigan Wheel 225 hub kit intended for?\u003c\/strong\u003e This hub kit is intended for 90-115 HP 4-stroke Suzuki\/Johnson outboard applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich prop housings work with this hub kit?\u003c\/strong\u003e The 225 XHS II Hub Kit is designed for use with Vortex and Apollo prop housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Michigan Wheel 225 hub kit weigh?\u003c\/strong\u003e It weighs 1.48 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Michigan Wheel 225 hub kit?\u003c\/strong\u003e The 225 hub kit measures 5.5 x 2.75 x 2.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 225 hub kit be used as a spare part?\u003c\/strong\u003e Yes, the Michigan Wheel 225 XHS II Hub Kit is suitable as a replacement or a spare hub for compatible Suzuki\/Johnson prop setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the hub kit protect during gear shifting?\u003c\/strong\u003e The Delrin cushioned sleeve in the 225 hub kit absorbs shifting impact and is designed to spin under significant load to help protect the lower unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Michigan Wheel 225 hub kit?\u003c\/strong\u003e The UPC for this hub kit is 014984016445.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991274827995,"sku":"MIW-225","price":53.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__14525.1722497854.500.750.jpg?v=1785189059"},{"product_id":"215-xhs-drop-in-hub-kit-for-nissan-tohatsu-50-70-hp-13-spline-3-1-4-gearcase-replaces-142405","title":"Michigan Wheel 215 XHS Drop-In Hub Kit, Replaces 142405\/142409\/142406, Nissan\/Tohatsu 50-70 HP 3-1\/4 Inch Gearcase","description":"\u003cp\u003eThe Michigan Wheel 215 is an XHS Xchangeable Hub Propeller drop-in hub kit built to fit inside compatible propeller housings so a damaged or worn hub can be replaced without buying a whole new propeller. At its core is a Delrin cushioned sleeve that absorbs the impact and stress created every time the outboard shifts gears. That sleeve is designed to spin under significant shock loads, sacrificing itself instead of the drivetrain, which protects the gearcase and lower unit from the kind of damage a solid hub would transmit straight through.\u003c\/p\u003e\u003cp\u003eThe 215 hub kit uses a thru hub exhaust design with a 13 tooth spline and is sized for a 3-1\/4 inch gearcase. It is built for use with Vortex and Apollo prop housings, and fits Evinrude\/Johnson and Suzuki outboards with 13-spline, 3-1\/4 inch gearcases. It is also a Standard Replacement hub for Nissan and Tohatsu 50-70 HP outboards on the same 3-1\/4 inch gearcase with thru hub exhaust and 13 tooth spline, covering the 50 HP (50C only), 55 HP, 60A\/60B, and 70A\/70B model variants across the year ranges listed below. Keeping a spare 215 hub kit on hand lets you swap a spun or worn hub quickly instead of replacing the entire propeller.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 215\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e XHS Xchangeable Hub Propeller Kit (Drop-In Hub)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Style:\u003c\/strong\u003e Thru Hub Exhaust\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpline:\u003c\/strong\u003e 13 Tooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGearcase Size:\u003c\/strong\u003e 3-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSleeve Material:\u003c\/strong\u003e Delrin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Prop Housings:\u003c\/strong\u003e Vortex, Apollo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Brushed metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan\/Tohatsu 50 HP (50C Only): 1987-1991\u003c\/li\u003e\n\u003cli\u003eNissan\/Tohatsu 60A \u0026amp; 60B (Excludes 60C): 1986-1999\u003c\/li\u003e\n\u003cli\u003eNissan\/Tohatsu 70A \u0026amp; 70B (Excludes 70C): 1981-1995\u003c\/li\u003e\n\u003cli\u003eNissan\/Tohatsu 55 HP: 1981-1988\u003c\/li\u003e\n\u003cli\u003eEvinrude\/Johnson and Suzuki outboards with 13-spline, 3-1\/4 inch gearcases\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e142405 (Standard Replacement for M40C \/ NS40C)\u003c\/li\u003e\n\u003cli\u003e142409 (Standard Replacement for M40D \/ NS40D)\u003c\/li\u003e\n\u003cli\u003e142406 (Standard Replacement for MD50 \/ NS50D)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Michigan Wheel 215 hub kit replace?\u003c\/strong\u003e The 215 hub kit is a Standard Replacement for OEM numbers 142405, 142409, and 142406, covering the M40C\/NS40C, M40D\/NS40D, and MD50\/NS50D applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards is the 215 XHS hub kit designed for?\u003c\/strong\u003e It fits Nissan\/Tohatsu 50-70 HP outboards, including the 50 HP (50C only), 55 HP, 60A\/60B (excluding 60C), and 70A\/70B (excluding 70C) variants, as well as Evinrude\/Johnson and Suzuki outboards with a 13-spline, 3-1\/4 inch gearcase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gearcase size does the Michigan Wheel 215 fit?\u003c\/strong\u003e The 215 hub kit is sized for a 3-1\/4 inch gearcase with a 13 tooth spline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 215 a thru hub exhaust or standard exhaust hub kit?\u003c\/strong\u003e The 215 uses a thru hub exhaust design, matching outboards that route exhaust through the propeller hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cushioning sleeve in the 215 hub kit made from?\u003c\/strong\u003e A Delrin cushioned sleeve absorbs the shifting impact and is designed to spin under significant shock loads, protecting the lower unit from damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat prop housings work with the Michigan Wheel 215 hub kit?\u003c\/strong\u003e The 215 is built for use with Vortex and Apollo prop housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 215 hub kit fit a 60C or 70C Nissan\/Tohatsu outboard?\u003c\/strong\u003e No. The 215 hub kit's Nissan\/Tohatsu fitment excludes 60C and 70C models, which use a different hub kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat year range Nissan\/Tohatsu 55 HP outboards use the 215 hub kit?\u003c\/strong\u003e The 55 HP Nissan\/Tohatsu application for the 215 hub kit spans 1981-1988.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Michigan Wheel 215 hub kit weigh?\u003c\/strong\u003e The 215 hub kit weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 215 hub kit fit Evinrude, Johnson, or Suzuki outboards?\u003c\/strong\u003e Yes, the 215 fits Evinrude\/Johnson and Suzuki outboards that use a 13-spline, 3-1\/4 inch gearcase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Michigan Wheel 215 a genuine drop-in replacement hub?\u003c\/strong\u003e Yes, the 215 is Michigan Wheel's XHS Xchangeable Hub drop-in kit, listed as a Standard Replacement for OEM 142405, 142409, and 142406.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991274860763,"sku":"MIW-115","price":43.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__77028.1722516807.500.750.jpg?v=1785188993"},{"product_id":"michigan-wheel-226-xhs-ii-drop-in-hub-kit-for-suzuki-johnson-df115a-df140-df140a-4-stroke-15-spline-4-1-4-gearcase","title":"Michigan Wheel 226 XHS II Drop-In Hub Kit for Suzuki\/Johnson DF140 HP 4-Stroke, 15-Spline, 4-1\/4 Inch Gearcase","description":"\u003cp\u003eThe Michigan Wheel 226 is an XHS II (Xchangeable Hub System II) Drop-In Hub Kit built for Suzuki 4-stroke outboards, specifically the DF115A, DF140 HP, and DF140A engine applications, and is also compatible with Suzuki\/Johnson DF140 HP 4-stroke outboards using a 15-spline, 4-1\/4 inch gearcase. The kit's core function is to let a single propeller hub work across compatible prop housings without swapping the entire propeller, using an exchangeable rubber hub design.\u003c\/p\u003e\u003cp\u003eAt the center of the kit is a Delrin cushioned sleeve that absorbs the impact and stress created every time the outboard shifts gears. This sleeve is engineered to spin under significant shock loads, which protects the lower unit's gears and driveline from damage during hard or sudden shifts. The 226 hub is designed for use with Vortex and Apollo prop housings, and it is also built to be interchangeable with Mercury's Flo-Torq II hub system, giving boat owners added flexibility when sourcing a replacement or keeping a spare hub on hand.\u003c\/p\u003e\u003cp\u003eFinished in a brushed silver\/gray rubber material, the hub measures 4-1\/4 inches and is matched to a 15-tooth spline gearcase. Each kit ships complete and ready to install into a compatible prop housing, making it a straightforward replacement or spare part for boaters running Suzuki DF115A, DF140 HP, or DF140A outboards.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 226\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Series:\u003c\/strong\u003e XHS II (Drop-In Hub) Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 4-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGearcase Spline:\u003c\/strong\u003e 15-Tooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber with Delrin cushioned sleeve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver or Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Brushed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Engine Models:\u003c\/strong\u003e Suzuki DF115A, DF140 HP, DF140A; Suzuki\/Johnson DF140 HP 4-Stroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProp Housing Compatibility:\u003c\/strong\u003e Vortex, Apollo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchangeable With:\u003c\/strong\u003e Mercury Flo-Torq II Hub System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014984016452\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 1 XHS II Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuzuki DF115A 4-Stroke\u003c\/li\u003e\n\u003cli\u003eSuzuki DF140 HP 4-Stroke\u003c\/li\u003e\n\u003cli\u003eSuzuki DF140A 4-Stroke\u003c\/li\u003e\n\u003cli\u003eSuzuki\/Johnson DF140 HP 4-Stroke, 15-Spline, 4-1\/4 Inch Gearcase\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Michigan Wheel 226 hub kit fit?\u003c\/strong\u003e The Michigan Wheel 226 XHS II hub kit is built for Suzuki DF115A, DF140 HP, and DF140A 4-stroke outboards, and it also fits Suzuki\/Johnson DF140 HP 4-stroke outboards with a 15-spline, 4-1\/4 inch gearcase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the XHS II 226 hub kit?\u003c\/strong\u003e Each Michigan Wheel 226 kit includes one complete XHS II drop-in hub with a Delrin cushioned sleeve, ready to install into a compatible Vortex or Apollo prop housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Michigan Wheel 226 hub interchangeable with Mercury hubs?\u003c\/strong\u003e Yes, the 226 XHS II hub is designed to be interchangeable with Mercury's Flo-Torq II hub system, in addition to Michigan Wheel's own Vortex and Apollo prop housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 226 hub kit made from?\u003c\/strong\u003e The hub is made of rubber finished in silver or gray, with a Delrin cushioned sleeve at its core that absorbs shifting impact and stress.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many spline teeth does the 226 hub use?\u003c\/strong\u003e The Michigan Wheel 226 hub kit is built for a 15-tooth spline gearcase, matching the 4-1\/4 inch Suzuki\/Johnson DF140 HP gearcase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Michigan Wheel 226 hub kit weigh?\u003c\/strong\u003e The 226 XHS II hub kit weighs 1.45 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Michigan Wheel 226 hub?\u003c\/strong\u003e The hub measures 4-1\/4 inches, matching the DF140 HP gearcase it is designed for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat prop housings work with the 226 XHS II hub?\u003c\/strong\u003e Michigan Wheel's Vortex and Apollo prop housings are compatible with the 226 hub, along with Mercury's Flo-Torq II hub system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the hub have a Delrin cushioned sleeve?\u003c\/strong\u003e The Delrin sleeve in the 226 hub kit absorbs the impact and stress created when the outboard shifts gears, and it is designed to spin under heavy impact to protect the lower unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 226 hub fit the DF115A and DF140A models specifically, or only the DF140 HP?\u003c\/strong\u003e The 226 XHS II hub kit is built for all three: Suzuki DF115A, DF140 HP, and DF140A 4-stroke engine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Michigan Wheel 226 hub kit?\u003c\/strong\u003e The 226 hub kit carries a 1-year limited warranty from Michigan Wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Michigan Wheel part or an aftermarket copy?\u003c\/strong\u003e Part number 226 is a genuine Michigan Wheel XHS II hub kit, not an aftermarket copy.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991274893531,"sku":"MIW-226","price":56.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__64934.1722370473.500.750.jpg?v=1785189141"},{"product_id":"michigan-wheel-217-xhs-xchangeable-hub-kit-for-suzuki-40-60-hp-outboards-replaces-58100-88l83","title":"Michigan Wheel XHS Hub Kit 217 for Yamaha Outboard 13-Spline, 3-1\/2 Inch Gearcase","description":"\u003cp\u003eThe Michigan Wheel XHS Hub Kit, part number 217, is an exchangeable hub kit built for Yamaha outboards with a 13-spline, 3-1\/2 inch gearcase. It is designed for use with Vortex and Apollo prop housings, giving boaters a way to replace a worn hub or keep a spare on hand without replacing the entire propeller. At the core of the kit is a Delrin cushioned sleeve that absorbs the impact and stress created when the outboard shifts gears. This sleeve is engineered to spin under significant impact, which protects the lower unit from shock loads that would otherwise transfer straight through the prop and gearcase. Because the hub is exchangeable, it lets an existing Vortex or Apollo style propeller be rebuilt with a fresh cushioning sleeve rather than requiring a full propeller purchase. This makes it a practical option both as a scheduled maintenance replacement part and as a spare kept aboard for unexpected hub failure. The kit is sized specifically for the 13-spline, 3-1\/2 inch Yamaha outboard gearcase, so fitment is limited to outboards matching that spline count and gearcase diameter.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 217\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Propeller Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Delrin cushioned sleeve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5 x 2.25 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpline Count:\u003c\/strong\u003e 13-spline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGearcase Size:\u003c\/strong\u003e 3-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Prop Housings:\u003c\/strong\u003e Vortex, Apollo\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eYamaha Outboard, 13-spline, 3-1\/2 inch gearcase\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Michigan Wheel 217 hub kit used for?\u003c\/strong\u003e Part number 217 is an exchangeable propeller hub kit that replaces the cushioning sleeve inside a Vortex or Apollo style propeller hub, restoring shock absorption without buying a whole new propeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill hub kit 217 fit my Yamaha outboard?\u003c\/strong\u003e It is sized for Yamaha outboards with a 13-spline, 3-1\/2 inch gearcase; it is not a fit for other spline counts or gearcase diameters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat prop housings work with the 217 hub kit?\u003c\/strong\u003e The kit is designed for use with Vortex and Apollo prop housings only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the cushioning sleeve made of?\u003c\/strong\u003e The sleeve in the Michigan Wheel 217 hub kit is made of Delrin, chosen for its ability to absorb shifting impact repeatedly without breaking down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the hub kit protect the outboard's lower unit?\u003c\/strong\u003e The Delrin sleeve is designed to spin under significant impact, which absorbs shock from gear shifting and shifting loads before that stress can reach the lower unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 217 hub kit weigh?\u003c\/strong\u003e The Michigan Wheel 217 hub kit weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of part number 217?\u003c\/strong\u003e It ships in a package measuring 5 x 2.25 x 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 217 hub kit a genuine Michigan Wheel part?\u003c\/strong\u003e Yes, part number 217 is a genuine Michigan Wheel XHS Hub Kit, not an aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this kit as a spare instead of a replacement?\u003c\/strong\u003e Yes, since it is an exchangeable hub kit, boaters commonly keep the Michigan Wheel 217 on hand as a spare for their Vortex or Apollo prop housing in case the current hub fails.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes hub kit 217 include the propeller blades?\u003c\/strong\u003e No, the 217 kit is the exchangeable hub and Delrin cushioned sleeve only, intended to be installed into an existing Vortex or Apollo prop housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat spline count does the 217 hub kit require?\u003c\/strong\u003e It is built for a 13-spline gearcase; installing it on a different spline count is not supported.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991274926299,"sku":"MIW-117","price":43.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__77958.1722510053.500.750.jpg?v=1785188618"},{"product_id":"michigan-wheel-228-xhs-ii-hub-kit-for-evinrude-e-tec-g2-15-spline-g2-gearcases","title":"Michigan Wheel 228 XHS II Hub Kit for Evinrude E-TEC G2 15-Spline Gearcases","description":"\u003cp\u003eThe Michigan Wheel 228 is an XHS II Xchangeable Hub Kit built for Evinrude E-TEC G2 outboards with 15-spline G2 gearcases. It supplies the exchangeable cushioning hub system that protects the lower unit by allowing the propeller hub to spin under sudden shock loads, such as hitting debris or shifting gears abruptly, rather than transmitting that impact directly into the gearcase. At the core of the kit is a Delrin cushioned sleeve that absorbs the impact and stress of shifting and protects the drivetrain from damage.\u003c\/p\u003e\u003cp\u003eThis hub kit is designed for use with Vortex and Apollo prop housings and is interchangeable with Mercury's Flo-Torq II hub system, making the 228 a practical option for outboard owners who need a replacement hub or want a spare on hand. The kit ships as a single ambidextrous unit finished in gold. It installs as part of a standard propeller hub replacement or rebuild and is intended for use with the specific Evinrude E-TEC G2 15-spline G2 gearcase fitment noted below.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 228\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e XHS II Xchangeable Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Gold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber (with Delrin cushioned sleeve)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5 x 4 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand Orientation:\u003c\/strong\u003e Ambidextrous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Prop Housings:\u003c\/strong\u003e Vortex and Apollo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub System Interchange:\u003c\/strong\u003e Mercury Flo-Torq II\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014984022019\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eEvinrude E-TEC G2 outboards with 15-spline G2 gearcase\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers apply to this part number.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards does the Michigan Wheel 228 hub kit fit?\u003c\/strong\u003e The 228 is built for Evinrude E-TEC G2 outboards equipped with the 15-spline G2 gearcase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 228 an exchangeable hub kit?\u003c\/strong\u003e Yes, the Michigan Wheel 228 is part of the XHS II Xchangeable Hub Kit series, which uses a replaceable Delrin cushioned sleeve rather than a fixed hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Delrin cushioned sleeve do?\u003c\/strong\u003e It absorbs the impact and stress created by shifting gears, allowing the hub in the 228 kit to spin under significant shock loads to protect the lower unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Michigan Wheel 228 work with a Mercury Flo-Torq II prop?\u003c\/strong\u003e The 228 hub kit is interchangeable with Mercury's Flo-Torq II hub system, so it can be used as a compatible replacement within that hub interchange.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat prop housings is this hub kit designed for?\u003c\/strong\u003e The 228 is designed for use with Vortex and Apollo prop housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 228 hub kit weigh?\u003c\/strong\u003e The Michigan Wheel 228 hub kit weighs 1.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 228 hub kit?\u003c\/strong\u003e The item measures 5 x 4 x 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in the 228 hub kit?\u003c\/strong\u003e The kit includes 1 hub kit unit for the Evinrude E-TEC G2 15-spline gearcase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Michigan Wheel 228 hub kit side-specific (port or starboard)?\u003c\/strong\u003e No, the 228 hub kit has an ambidextrous hand orientation and is not side-specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Michigan Wheel 228 hub kit?\u003c\/strong\u003e It has a gold finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 228 come with a warranty?\u003c\/strong\u003e The Michigan Wheel 228 hub kit is backed by a 1-year limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 228 hub kit made of?\u003c\/strong\u003e The hub kit is made of rubber and includes a Delrin cushioned sleeve as the cushioning component.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991274959067,"sku":"MIW-228","price":55.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__08886.1722350060.500.750.jpg?v=1785188511"},{"product_id":"michigan-wheel-227-xhs-ii-exchangeable-hub-kit-fits-suzuki-johnson-df70a-df80a-df90a-15-spline-4-1-4in-gearcase-flo-torq-ii-compatible","title":"Michigan Wheel 227 XHS II Xchangeable Hub Kit for Suzuki\/Johnson DF70A\/DF80A\/DF90A, 15-Spline 4-1\/4 Inch Gearcase","description":"\u003cp\u003eThe Michigan Wheel 227 is an XHS II Xchangeable Hub Kit built to convert or replace the hub system inside a compatible outboard propeller. At its core is a Delrin cushioned sleeve that absorbs the impact and stress created every time the gears shift, and the sleeve is designed to spin under significant impact loads, protecting the lower unit from shock damage that would otherwise transfer straight through the prop shaft. This makes the kit a practical choice both as a factory-style replacement hub and as a spare kept on board for field service.\u003c\/p\u003e\u003cp\u003eThe 227 hub kit is sized for a 4-1\/4 inch, 15-spline gearcase and is compatible with Suzuki\/Johnson DF70A, DF80A, and DF90A outboards. It is engineered for use with Vortex and Apollo prop housings and is interchangeable with Mercury's Flo-Torq II hub system, so it can be used to service propellers built around either hub platform. The rubber hub construction gives the assembly the flex needed to cushion shifting shock while maintaining a secure spline fit against the gearcase.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 227\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e XHS II Xchangeable Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber with Delrin cushioned sleeve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Brushed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGearcase Compatibility:\u003c\/strong\u003e 4-1\/4 inch, 15-spline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Outboards:\u003c\/strong\u003e Suzuki\/Johnson DF70A, DF80A, DF90A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Hub Systems:\u003c\/strong\u003e Mercury Flo-Torq II, Vortex prop housing, Apollo prop housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014984016469\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSuzuki\/Johnson DF70A, DF80A, DF90A outboards with a 15-spline, 4-1\/4 inch gearcase\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Michigan Wheel 227 hub kit used for?\u003c\/strong\u003e The Michigan Wheel 227 is an XHS II Xchangeable Hub Kit that replaces or rebuilds the hub inside a compatible propeller, using a Delrin cushioned sleeve to absorb shifting shock and protect the lower unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich outboards does the 227 hub kit fit?\u003c\/strong\u003e It is compatible with Suzuki\/Johnson DF70A, DF80A, and DF90A outboards fitted with a 4-1\/4 inch, 15-spline gearcase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 227 hub kit work with a Mercury Flo-Torq II propeller?\u003c\/strong\u003e Yes, the Michigan Wheel 227 is interchangeable with Mercury's Flo-Torq II hub system, so it can service props built around that hub platform in addition to Vortex and Apollo prop housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hub sleeve made of?\u003c\/strong\u003e The 227 kit uses a rubber hub with a Delrin cushioned sleeve, a material chosen to absorb impact and stress from gear shifting while allowing controlled spin under significant impact loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Michigan Wheel 227 hub kit weigh?\u003c\/strong\u003e The Michigan Wheel 227 hub kit weighs 1.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hub kits come in one package of part number 227?\u003c\/strong\u003e One Michigan Wheel 227 hub kit is included per unit, based on the listed unit count of 1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 227 hub kit a genuine Michigan Wheel part?\u003c\/strong\u003e Yes, part number 227 is a genuine Michigan Wheel XHS II Xchangeable Hub Kit, not an aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat prop housings is the 227 hub kit designed for?\u003c\/strong\u003e It is designed for use with Vortex and Apollo prop housings, in addition to being interchangeable with Mercury's Flo-Torq II hub system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 227 hub kit fit a 15-spline gearcase?\u003c\/strong\u003e Yes, the Michigan Wheel 227 is sized for a 15-spline, 4-1\/4 inch gearcase as used on Suzuki\/Johnson DF70A, DF80A, and DF90A outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Michigan Wheel 227 hub kit?\u003c\/strong\u003e The 227 hub kit carries a 1-year limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the finish on the Michigan Wheel 227 hub kit?\u003c\/strong\u003e The hub kit has a brushed exterior finish.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991275024603,"sku":"MIW-227","price":55.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__13400.1722493371.500.750.jpg?v=1785189172"},{"product_id":"michigan-wheel-213-xhs-drop-in-hub-kit-for-nissan-tohatsu-50-70-hp-honda-bft60-outboards-13-tooth-spline-thru-hub-exhaust","title":"Michigan Wheel XHS Drop-In Hub Kit 213 for Honda BFT60 Outboards","description":"\u003cp\u003eThe Michigan Wheel XHS Drop-In Hub Kit 213 is a drop-in propeller hub replacement kit built for Honda BFT60 outboards. Drop-in hub kits let you rebuild or replace a worn or damaged propeller hub without buying an entirely new propeller, restoring proper shock-absorption and torque transfer between the prop and the propeller shaft. Kit 213 is paired with companion number 113 under Michigan Wheel's XHS hub kit numbering, and both numbers refer to the same kit configuration for this application.\u003c\/p\u003e\u003cp\u003eThis kit is specifically matched to the Honda BFT60 outboard. Michigan Wheel also offers a separate XHS Drop-In Hub Kit under numbers 116\/216 for other engine applications, so boaters should confirm their engine model before ordering to make sure they get the correct kit for their outboard.\u003c\/p\u003e\u003cp\u003eKit 213 weighs 0.92 pounds and is identified by UPC 014984024723. As a Michigan Wheel product, it is built to fit and function as an OEM-style replacement hub kit for the specified Honda outboard application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 213\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e XHS Drop-In Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompanion Kit Number:\u003c\/strong\u003e Used together with Kit 113\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Honda BFT60 outboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternate Kit for Other Engines:\u003c\/strong\u003e XHS Drop-In Hub Kit 116\/216\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.92 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014984024723\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eHonda BFT60 outboard\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engine does the Michigan Wheel 213 hub kit fit?\u003c\/strong\u003e Kit 213 is built specifically for the Honda BFT60 outboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part number 213 the same as part number 113?\u003c\/strong\u003e Yes, Michigan Wheel lists Kit 213 together with companion number 113 as the same XHS Drop-In Hub Kit for the Honda BFT60 application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hub kit work on other Honda outboards besides the BFT60?\u003c\/strong\u003e For engine applications other than the BFT60, Michigan Wheel specifies a different kit, XHS Drop-In Hub Kit 116\/216, rather than Kit 213.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Michigan Wheel Hub Kit 213 weigh?\u003c\/strong\u003e It weighs 0.92 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a drop-in hub kit used for?\u003c\/strong\u003e A drop-in hub kit replaces the propeller's internal hub assembly, which absorbs shock and transfers torque between the propeller and the propeller shaft, without requiring a full new propeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Kit 213 a genuine Michigan Wheel part?\u003c\/strong\u003e Yes, part number 213 is a genuine Michigan Wheel XHS Drop-In Hub Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with the Michigan Wheel 213 hub kit?\u003c\/strong\u003e The UPC for this kit is 014984024723.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if I need Kit 213 or Kit 116\/216?\u003c\/strong\u003e Use Kit 213 (paired with 113) if your outboard is a Honda BFT60; Michigan Wheel specifies Kit 116\/216 for all other engine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the hub kit include the propeller itself?\u003c\/strong\u003e This listing is for the XHS Drop-In Hub Kit 213 hub components; it is intended for rebuilding or replacing the hub in an existing propeller for the Honda BFT60.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hub kit compatible with other outboard brands like Nissan or Tohatsu?\u003c\/strong\u003e Kit 213 is specified for the Honda BFT60; Michigan Wheel's XHS Drop-In Hub Kit lineup covers other engine applications under separate kit numbers.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991275057371,"sku":"MIW-113","price":43.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__39088.1722479083.500.750.jpg?v=1785188997"},{"product_id":"michigan-wheel-aqualube-high-performance-water-lubricated-shaft-bearing-mpn-218-fits-3-4-in-to-1-1-4-in-shafts","title":"Michigan Wheel Hub Kit 218 for Evinrude\/Johnson 20-35 HP Outboard Motors","description":"\u003cp\u003eThe Michigan Wheel Hub Kit 218 is a replacement propeller hub kit built for Evinrude and Johnson outboard motors in the 20-35 HP range. A hub kit adapts a Michigan Wheel propeller to the specific splined drive shaft of the outboard, allowing the prop to be mounted securely on engines it was not originally bored for. This kit is constructed from bronze and polyurethane, materials chosen for their corrosion resistance in saltwater and freshwater environments and for absorbing the shock and vibration transmitted through the drive train during operation. Bronze components provide long-term wear resistance at the metal-to-metal contact points, while the polyurethane element cushions engagement and helps protect the gearcase from shock loading if the propeller strikes an object. Hub Kit 218 is sold as a single unit intended for use with compatible Michigan Wheel propellers rated for 20-35 HP Evinrude and Johnson outboards. It is a straightforward, mechanic-installable part for boat owners maintaining or upgrading their propeller setup without replacing the entire propeller assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 218\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard Propeller Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Evinrude\/Johnson outboard motors, 20-35 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Bronze, Polyurethane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\/Color:\u003c\/strong\u003e Bronze (gold brown)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.83 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014984012997\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvinrude outboard motors, 20-35 HP\u003c\/li\u003e\n\u003cli\u003eJohnson outboard motors, 20-35 HP\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboard motors is Hub Kit 218 designed for?\u003c\/strong\u003e Hub Kit 218 is designed for Evinrude and Johnson outboard motors in the 20-35 HP range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a propeller hub kit used for?\u003c\/strong\u003e A hub kit adapts a propeller to the splined drive shaft of a specific outboard motor, allowing the propeller to mount securely and transmit power from the engine to the prop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials is the Michigan Wheel Hub Kit 218 made from?\u003c\/strong\u003e This hub kit is made from bronze and polyurethane, with the bronze providing wear resistance and the polyurethane absorbing shock and vibration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Hub Kit 218 weigh?\u003c\/strong\u003e The Michigan Wheel Hub Kit 218 weighs 0.83 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Michigan Wheel part?\u003c\/strong\u003e Yes, part number 218 is a genuine Michigan Wheel hub kit, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the hub kit come with the propeller included?\u003c\/strong\u003e No, Hub Kit 218 is the hub components only and is intended to be used with a compatible Michigan Wheel propeller rated for 20-35 HP Evinrude\/Johnson outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hub kit fit motors outside the 20-35 HP range?\u003c\/strong\u003e Hub Kit 218 is specified for Evinrude and Johnson outboards in the 20-35 HP range; fitment outside that horsepower range is not specified for this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does the Hub Kit 218 have?\u003c\/strong\u003e The kit has a bronze finish, described as a gold brown color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install this hub kit myself?\u003c\/strong\u003e The Michigan Wheel Hub Kit 218 is a standard propeller hub component that can be installed by anyone comfortable performing routine propeller maintenance on their Evinrude or Johnson outboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the UPC for this product 014984012997?\u003c\/strong\u003e Yes, the Hub Kit 218 carries UPC 014984012997.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991275352283,"sku":"MIW-118","price":43.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__40521.1722348949.500.750.jpg?v=1785188645"},{"product_id":"turning-point-propellers-hub-kit-11300301-for-evinrude-outboard-propellers","title":"Turning Point Propellers Hub Kit 11300301 for Evinrude Outboard Propellers","description":"\u003cp\u003eThe Turning Point Propellers Hub Kit 11300301 is a replacement hub system designed for Evinrude outboard propellers. A propeller hub kit is the internal shock-absorbing assembly that sits between the propeller and the propeller shaft, allowing the prop to slip under sudden impact or overload and protecting the gearcase and drivetrain from damage. Hub kits are a routine maintenance and rebuild item, used when a propeller's original hub has worn out, cracked, or been damaged from repeated impacts, or when rebuilding a used propeller for continued service.\u003c\/p\u003e\u003cp\u003eThis kit is constructed of plastic components and ships as a single complete kit (one item), making it straightforward to install as a full replacement set rather than sourcing individual hub parts separately. It is intended for the Evinrude outboard propeller category, helping restore proper propeller-to-shaft engagement and cushioning after wear or impact.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11300301\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Propeller Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Evinrude Outboard Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 14 x 13.25 x 6.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 7.05 x 2.83 x 2.76 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200663\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Turning Point Propellers Hub Kit 11300301 used for?\u003c\/strong\u003e The 11300301 hub kit replaces the internal shock-absorbing hub assembly inside a propeller, letting the propeller slip under sudden impact or overload to help protect the gearcase and drivetrain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hub kit designed for a specific propeller category?\u003c\/strong\u003e Yes, the Turning Point Propellers 11300301 hub kit is listed for Evinrude outboard propellers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 11300301 hub kit made from?\u003c\/strong\u003e This hub kit is made of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in the 11300301 hub kit?\u003c\/strong\u003e The kit ships as one complete item (Number of Items: 1), containing the full hub assembly rather than individual loose parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the item weight of the Turning Point Propellers Hub Kit 11300301?\u003c\/strong\u003e The hub kit weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 11300301 hub kit?\u003c\/strong\u003e The item measures 14 x 13.25 x 6.25 inches, and the package it ships in measures 7.05 x 2.83 x 2.76 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen would I need to replace a propeller hub kit like the 11300301?\u003c\/strong\u003e A hub kit is typically replaced when the existing hub has worn out, cracked, or been damaged from impact, or when rebuilding a used propeller so it engages the shaft properly again.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 11300301 hub kit include installation hardware or just the hub components?\u003c\/strong\u003e The Turning Point Propellers 11300301 is sold as a hub kit; it is intended as a full internal hub replacement for the propeller rather than a partial parts set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Turning Point Propellers Hub Kit 11300301?\u003c\/strong\u003e The UPC for this hub kit is 652480200663.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 11300301 hub kit be used on any outboard propeller?\u003c\/strong\u003e This hub kit is categorized specifically for Evinrude outboard propellers.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031616331995,"sku":"TUR-13","price":38.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71Yr6-MUZYL.jpg?v=1785215987"},{"product_id":"turning-point-propellers-hustler-hub-kit-11100101-interchangeable-propeller-hub-system","title":"Turning Point Propellers Hustler Hub Kit 11100101, Interchangeable Propeller Hub System","description":"\u003cp\u003eThe Turning Point Propellers Hustler Hub Kit 11100101 is an interchangeable hub system built to protect your outboard's gear case and drivetrain from the impact of shifting and sudden load changes. It installs inside a compatible Turning Point propeller to absorb gear shock, cutting down on the vibration and chatter that can develop as a propeller wears or takes repeated hard shifts. The kit is designed for use with Evinrude outboard propellers, giving boaters a replacement hub option that restores a secure, tight fit between the propeller and the drive shaft.\u003c\/p\u003e\u003cp\u003eInside the hub, corrosion resistant brass splines pair with a nylon body to transfer engine power smoothly while resisting the saltwater and freshwater exposure that marine hardware faces season after season. This construction is what allows the kit to eliminate spun hubs, a common failure point where a worn hub lets the propeller spin independently of the shaft, and to stop the cracking that can develop in aging or damaged hubs over time. Replacing a worn hub with this kit restores proper power transfer without requiring a full propeller replacement.\u003c\/p\u003e\u003cp\u003eThe hub kit measures 4.8 x 2.2 x 2.2 inches and weighs 1 pound, with a machined exterior finish for consistent fit and balance. It is sold as a direct-fit replacement hub for boaters running compatible Turning Point propellers who need to service or upgrade the hub rather than the entire propeller.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11100101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Evinrude Outboard Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 4.8 x 2.2 x 2.2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass and nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200588\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Turning Point Propellers Hustler Hub Kit 11100101 used for?\u003c\/strong\u003e Hub kit 11100101 is an interchangeable hub system installed inside a compatible Turning Point propeller to absorb gear shock and protect the engine and drive from impact damage during shifting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hub kit fit my propeller?\u003c\/strong\u003e The Turning Point Hustler Hub Kit 11100101 is designed for use with Evinrude outboard propellers; check that your propeller uses a Turning Point interchangeable hub system before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of hub kit 11100101?\u003c\/strong\u003e Hub kit 11100101 measures 4.8 x 2.2 x 2.2 inches and weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hub made of?\u003c\/strong\u003e The 11100101 hub is built with corrosion resistant brass splines and a nylon body, a combination chosen to hold up against saltwater and freshwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit prevent spun hubs?\u003c\/strong\u003e Yes, the design of the 11100101 hub kit is intended to eliminate spun hubs, where a worn hub allows the propeller to spin independently of the drive shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hub kit fix a cracked hub?\u003c\/strong\u003e Installing the Turning Point Hustler Hub Kit 11100101 replaces a cracked or worn hub, restoring proper power transfer and ending the cracking issue at its source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace the whole propeller if the hub wears out?\u003c\/strong\u003e No, hub kit 11100101 lets you replace just the hub inside a compatible Turning Point propeller instead of replacing the entire propeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the hub have?\u003c\/strong\u003e The 11100101 hub kit has a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hub kit reduce propeller vibration?\u003c\/strong\u003e Yes, installing the Hustler Hub Kit 11100101 is intended to minimize propeller vibration and chatter caused by a worn or loose hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Turning Point Propellers part?\u003c\/strong\u003e Yes, hub kit 11100101 is manufactured by Turning Point Propellers as part of its interchangeable hub system for its propellers.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031616364763,"sku":"TUR-201","price":25.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71PwckL3f9L.jpg?v=1785215987"},{"product_id":"turning-point-propellers-11300101-hub-kit-for-evinrude-outboard-propellers","title":"Turning Point Propellers 11300101 Hub Kit for Evinrude Outboard Propellers","description":"\u003cp\u003eThe Turning Point Propellers 11300101 Hub Kit is a replacement hub kit designed for Evinrude outboard propellers, allowing the propeller to be properly fitted and secured to the propeller shaft. The hub kit is made of plastic and is supplied as a single, complete kit ready for installation. Boat owners use hub kits like this one to replace a worn, damaged, or missing hub assembly on a propeller so the propeller can continue to seat and drive correctly on the outboard's shaft. Because the hub is a wear item that absorbs shock and torque during operation, keeping it in good condition helps maintain proper propeller fit and performance. This kit is compact, with item dimensions of 2.12 x 2.13 x 4.5 inches, and ships in packaging measuring 5.79 x 2.36 x 2.24 inches. It weighs 0.69 pounds. The hub kit carries no additional color finish (no color) and is intended for use with Evinrude outboard propellers that use this hub configuration. Part number 11300101 is the manufacturer part number for this kit, making it easy to identify and order the correct replacement.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11300101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Propeller Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Evinrude Outboard Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e No Color\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2.12 x 2.13 x 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5.79 x 2.36 x 2.24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.69 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200649\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eEvinrude outboard propellers using this hub kit configuration\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Turning Point Propellers 11300101 Hub Kit used for?\u003c\/strong\u003e It is a replacement hub kit for propellers, used to restore proper fit and function between the propeller and the outboard's propeller shaft when the original hub is worn or damaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill hub kit 11300101 fit my outboard propeller?\u003c\/strong\u003e This hub kit is designed for Evinrude outboard propellers that use this hub configuration; it is listed specifically under Evinrude outboard propeller applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 11300101 hub kit made from?\u003c\/strong\u003e The kit is made of plastic, consistent with standard propeller hub kit construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in the Turning Point 11300101 kit?\u003c\/strong\u003e The kit includes 1 item, supplied as a single complete hub kit for one propeller installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 11300101 hub kit?\u003c\/strong\u003e The item measures 2.12 x 2.13 x 4.5 inches, and it ships in packaging measuring 5.79 x 2.36 x 2.24 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Turning Point 11300101 Hub Kit weigh?\u003c\/strong\u003e This hub kit weighs 0.69 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 11300101 hub kit come in different colors?\u003c\/strong\u003e No, this hub kit is supplied with no color finish (listed as No Color), as it is a functional plastic component rather than a cosmetic part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Turning Point 11300101 a genuine manufacturer part?\u003c\/strong\u003e Yes, 11300101 is the manufacturer part number for this Turning Point Propellers hub kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Turning Point 11300101 Hub Kit?\u003c\/strong\u003e The UPC for this hub kit is 652480200649.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 11300101 hub kit be used to repair a damaged propeller hub?\u003c\/strong\u003e Yes, this hub kit is intended as a replacement for a worn or damaged propeller hub on compatible Evinrude outboard propellers.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031616397531,"sku":"TUR-11","price":38.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71Q1iXt0M9L.jpg?v=1785215987"},{"product_id":"turning-point-propellers-hub-kit-11300200-yamaha-40-55-hp-2-stroke-30-60-hp-4-stroke-outboards","title":"Turning Point Propellers Hub Kit 11300200 - Yamaha 40-55 HP 2-Stroke \u0026 30-60 HP 4-Stroke Outboards","description":"\u003cp\u003eThe Turning Point Propellers Hub Kit 11300200 is a replacement propeller hub system engineered for Yamaha outboards, sized to gearcase group 12. It fits Yamaha 2 stroke engines from 40 hp to 55 hp, as well as Yamaha 4 stroke engines including the FT25 hp High Thrust and the 30 hp to 60 hp range. The hub kit is built with corrosion resistant brass splines paired with a nylon hub sleeve, giving the propeller a durable, moisture-resistant interface between the prop shaft and the propeller itself.\u003c\/p\u003e\u003cp\u003eThis hub system is designed to absorb shock loads transmitted through the drivetrain, reducing gear shock and the resulting wear on the engine and drive components. By cushioning torque changes at shift and throttle transitions, it also minimizes propeller vibration and chatter for smoother running. The kit addresses two of the most common propeller hub failures: spun hubs, where the inner hub slips inside the propeller under load, and hub cracking from repeated stress. Installing this hub kit restores a tight, reliable connection between the propeller and the shaft.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11300200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Propeller Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Kit Group Size:\u003c\/strong\u003e 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Yamaha 2 stroke 40 hp to 55 hp; Yamaha 4 stroke FT25 hp High Thrust, 30 hp to 60 hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass and nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multicolor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2.13 x 4.5 x 2.12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.81 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200403\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYamaha 2 stroke: 40 hp to 55 hp\u003c\/li\u003e\n\u003cli\u003eYamaha 4 stroke: FT25 hp High Thrust, 30 hp to 60 hp\u003c\/li\u003e\n\u003cli\u003eGearcase \/ hub kit group size: 12\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Turning Point Propellers 11300200 hub kit used for?\u003c\/strong\u003e The 11300200 hub kit is installed inside a compatible propeller to give it a shock-absorbing connection to the propeller shaft, reducing gear shock, vibration, and the chance of a spun or cracked hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich outboards does hub kit 11300200 fit?\u003c\/strong\u003e This hub kit fits Yamaha 2 stroke outboards from 40 hp to 55 hp, and Yamaha 4 stroke outboards including the FT25 hp High Thrust model and the 30 hp to 60 hp range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hub kit group size is 11300200?\u003c\/strong\u003e Turning Point hub kit 11300200 is a group 12 hub kit, meaning it is sized to match propellers built for that specific gearcase and spline grouping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 11300200 hub kit made from?\u003c\/strong\u003e It is made with corrosion resistant brass splines combined with a nylon hub sleeve, a combination chosen for durability in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hub kit work with a 4 stroke Yamaha outboard?\u003c\/strong\u003e Yes, the 11300200 hub kit is designed to fit Yamaha 4 stroke outboards in the FT25 hp High Thrust model as well as the 30 hp to 60 hp range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 11300200 kit fit 2 stroke Yamaha engines too?\u003c\/strong\u003e Yes, this hub kit covers Yamaha 2 stroke outboards from 40 hp up to 55 hp in addition to the listed 4 stroke fitments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat problem does a hub kit like the 11300200 solve?\u003c\/strong\u003e It solves spun hubs and hub cracking, two failures where the propeller's inner hub separates from or fractures within the propeller body under load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 11300200 hub kit?\u003c\/strong\u003e The 11300200 hub kit measures 2.13 x 4.5 x 2.12 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 11300200 hub kit weigh?\u003c\/strong\u003e The Turning Point 11300200 hub kit weighs 0.81 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the hub kit reduce vibration at the propeller?\u003c\/strong\u003e Yes, by cushioning shock loads through its brass and nylon construction, the 11300200 hub kit minimizes propeller vibration and chatter during operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11300200 hub kit a genuine Turning Point Propellers part?\u003c\/strong\u003e Yes, part number 11300200 is manufactured by Turning Point Propellers specifically as a hub kit for the Yamaha fitments listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 11300200 hub kit?\u003c\/strong\u003e The 11300200 hub kit is listed as multicolor, reflecting its combination of brass and nylon components.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031616299227,"sku":"TUR-12","price":38.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71xE5YDURSL.jpg?v=1785215987"},{"product_id":"turning-point-propellers-hub-kit-202-11100201-for-8-15-hp-evinrude-johnson-outboards-2-5-inch-gearcase-13-spline","title":"Turning Point Propellers Hub Kit 202, 11100201, for 8-15 HP Evinrude\/Johnson Outboards, 2.5 Inch Gearcase, 13 Spline","description":"\u003cp\u003eThe Turning Point Propellers Hub Kit 202 (part number 11100201) is a replacement propeller hub system designed for 8-15 HP Evinrude and Johnson outboard motors equipped with a 2.5 inch gearcase and a 13 spline propeller shaft. A hub kit is the internal rubber-cushioned drive component that sits inside the propeller and transfers engine torque to the prop, absorbing shock loads from gear engagement and protecting the lower unit from impact damage. Installing a hub kit is a standard maintenance step when a propeller starts to slip, spin freely on the shaft, or shows wear at the hub interface after years of use.\u003c\/p\u003e\u003cp\u003eThis hub kit is built to be interchangeable with Mercury Flo-Torq II, Michigan Wheel XHS, and Solas Rubex hub systems, so it can be used as a direct-fit replacement wherever those hub styles are specified for a compatible 2.5 inch gearcase, 13 spline application. It is intended for use with propellers matching this gearcase and spline configuration on 8-15 HP Evinrude\/Johnson outboards.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11100201\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Hub Kit 202\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200595\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 8-15 HP Evinrude\/Johnson outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGearcase Size:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpline Count:\u003c\/strong\u003e 13 spline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub System Compatibility:\u003c\/strong\u003e Interchangeable with Mercury Flo-Torq II, Michigan Wheel XHS, and Solas Rubex hub systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8-15 HP Evinrude\/Johnson outboards\u003c\/li\u003e\n\u003cli\u003e2.5 inch gearcase\u003c\/li\u003e\n\u003cli\u003e13 spline propeller shaft\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards does the Turning Point Hub Kit 202 fit?\u003c\/strong\u003e The Hub Kit 202 (part number 11100201) fits 8-15 HP Evinrude and Johnson outboards that use a 2.5 inch gearcase and a 13 spline propeller shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hub kit compatible with Mercury Flo-Torq II hubs?\u003c\/strong\u003e Yes, the Turning Point Hub Kit 202 is interchangeable with Mercury Flo-Torq II hub systems on matching 2.5 inch gearcase, 13 spline applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Hub Kit 202 work with Michigan Wheel or Solas propellers?\u003c\/strong\u003e The Hub Kit 202 is interchangeable with Michigan Wheel XHS and Solas Rubex hub systems, so it can be used as a replacement hub for propellers built around those hub styles on a compatible gearcase and spline count.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many splines does the Turning Point Hub Kit 202 have?\u003c\/strong\u003e This hub kit is built for a 13 spline propeller shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gearcase size is required for part number 11100201?\u003c\/strong\u003e Part number 11100201 is sized for a 2.5 inch gearcase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Hub Kit 202 weigh?\u003c\/strong\u003e The Turning Point Hub Kit 202 weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Turning Point Hub Kit 202?\u003c\/strong\u003e The Hub Kit 202, part number 11100201, is a complete hub kit for the propeller's internal drive components sized for a 2.5 inch gearcase and 13 spline shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Turning Point Hub Kit 202 a genuine Turning Point Propellers part?\u003c\/strong\u003e Yes, part number 11100201 is a genuine Turning Point Propellers hub kit, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this hub kit if my propeller currently uses a Solas Rubex hub?\u003c\/strong\u003e Yes, the Hub Kit 202 is interchangeable with Solas Rubex hub systems on matching 2.5 inch gearcase, 13 spline setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat horsepower range is the Turning Point Hub Kit 202 designed for?\u003c\/strong\u003e This hub kit, part number 11100201, is designed for the 8-15 HP range on Evinrude and Johnson outboards.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031616430299,"sku":"TUR-202","price":25.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/612F05bAZfL.jpg?v=1785215987"},{"product_id":"turning-point-propellers-11100501-hustler-hub-kit-205-for-evinrude-outboard-propellers","title":"Turning Point Propellers 11100501 Hustler Hub Kit - 205 for Evinrude Outboard Propellers","description":"\u003cp\u003eThe Turning Point Propellers 11100501 Hustler Hub Kit (205) is a replacement propeller hub kit designed to protect the drivetrain of Evinrude outboard propellers. It works by absorbing shifting shock and cushioning the connection between the propeller and the propeller shaft, reducing the sudden loads that gears and drive components experience during shifting and throttle changes. This cushioning action also minimizes propeller vibration and chatter, helping the propeller spin more smoothly and quietly at speed.\u003c\/p\u003e\u003cp\u003eThe kit uses corrosion resistant brass splines paired with a nylon hub body, a combination built to stand up to saltwater and freshwater exposure while providing a durable interface between the propeller and shaft. Because the hub kit isolates the propeller from direct metal-to-metal shaft contact, it helps eliminate spun hubs and ends hub cracking, two common failure points on older or heavily used propellers. Each kit contains one hub assembly intended to replace a worn or damaged factory hub inside a compatible Evinrude outboard propeller.\u003c\/p\u003e\u003cp\u003eThis hub kit is sold as a standalone rebuild component for propellers in the Evinrude Outboard Propellers category and is intended for owners looking to restore proper shock absorption and shift performance to a propeller that has developed play, slippage, or cracking around the hub.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11100501\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 205 Turning Point Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Evinrude Outboard Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200601\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5.3 x 2.4 x 2.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Corrosion resistant brass splines and nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e No Color\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for Evinrude outboard propellers within the 205 hub kit family.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part number.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Turning Point Propellers 11100501 Hustler Hub Kit do?\u003c\/strong\u003e It reduces gear shock and engine or drive damage by cushioning the connection between the propeller and the propeller shaft, and it minimizes propeller vibration and chatter during operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hub kit stop a spun hub?\u003c\/strong\u003e Yes, the 11100501 hub kit is designed to eliminate spun hubs and end hub cracking, both common issues in worn propeller hubs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the propeller hub made of?\u003c\/strong\u003e The 11100501 Hustler Hub Kit uses corrosion resistant brass splines combined with a nylon hub body for durability in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in the 11100501 hub kit?\u003c\/strong\u003e One hub assembly is included per kit, listed as a single item under the 205 Turning Point Hub Kit product name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Turning Point 11100501 hub kit weigh?\u003c\/strong\u003e This hub kit weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the 11100501 hub kit?\u003c\/strong\u003e The package measures 5.3 x 2.4 x 2.3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat propellers is the 205 Turning Point Hub Kit intended for?\u003c\/strong\u003e This hub kit, part number 11100501, is designed for Evinrude outboard propellers in the 205 hub kit family.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 11100501 hub kit help with propeller vibration?\u003c\/strong\u003e Yes, minimizing propeller vibration and chatter is one of the primary functions of the Turning Point 11100501 Hustler Hub Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11100501 hub kit resistant to corrosion?\u003c\/strong\u003e Yes, the brass splines used in this hub kit are corrosion resistant, making it suitable for continued marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Turning Point 11100501 hub kit?\u003c\/strong\u003e The 11100501 hub kit has no distinct color designation, listed simply as No Color.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031616626907,"sku":"TUR-205","price":25.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71RSOG4xxpL.jpg?v=1785215990"},{"product_id":"turning-point-propellers-hustler-hub-kit-11100801-model-208-propeller-hub-system","title":"Turning Point Propellers Hustler Hub Kit 11100801 - Model 208 Propeller Hub System","description":"\u003cp\u003eThe Turning Point Propellers Hustler Hub Kit, part number 11100801, is a replacement propeller hub system designed for the 208 model application. This hub kit is built to absorb gear shock and reduce the impact transferred from the propeller to the engine and drive during shifting, helping protect the drivetrain from repeated stress. It also works to minimize propeller vibration and chatter, contributing to a smoother ride at the helm.\u003c\/p\u003e\u003cp\u003eThe hub kit uses corrosion resistant brass splines paired with a nylon bushing, a combination built to withstand the demands of marine use while cushioning the connection between the propeller and the propeller shaft. This construction is intended to eliminate spun hubs, a common failure point where the inner hub separates from the outer shell under load, and to end hub cracking that can occur with worn or degraded hub materials over time. Replacing a worn hub kit restores proper power transfer from the drive to the propeller and helps prevent recurring vibration or slippage issues.\u003c\/p\u003e\u003cp\u003eCompact and lightweight, the 11100801 Hustler Hub Kit measures 5 inches long by 2 inches wide and weighs 1 pound, making it straightforward to handle during a propeller service or hub replacement.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11100801\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Kit Model:\u003c\/strong\u003e 208\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass and nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5 inches long x 2 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200632\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00652480200632\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Turning Point Propellers 11100801 Hustler Hub Kit used for?\u003c\/strong\u003e The 11100801 Hustler Hub Kit is a propeller hub replacement system that reduces gear shock and engine\/drive damage while minimizing propeller vibration and chatter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hub kit fit my propeller?\u003c\/strong\u003e The 11100801 Hustler Hub Kit is designed for the 208 model application; check that your propeller uses the 208 hub configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials is the 11100801 hub kit made from?\u003c\/strong\u003e This hub kit is constructed with corrosion resistant brass splines and a nylon bushing, a combination built to handle marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Turning Point 11100801 Hustler Hub Kit weigh?\u003c\/strong\u003e The 11100801 Hustler Hub Kit weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this hub kit?\u003c\/strong\u003e The 11100801 Hustler Hub Kit measures 5 inches long by 2 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat problem does a spun hub cause, and does this kit fix it?\u003c\/strong\u003e A spun hub occurs when the inner hub separates from the outer shell under load, causing loss of power transfer; the 11100801 Hustler Hub Kit is designed to eliminate spun hubs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hub kit stop hub cracking?\u003c\/strong\u003e Yes, the brass and nylon construction of the 11100801 Hustler Hub Kit is designed to end hub cracking associated with worn hub materials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11100801 hub kit corrosion resistant?\u003c\/strong\u003e Yes, the splines in this hub kit are brass, which is corrosion resistant for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 11100801 Hustler Hub Kit?\u003c\/strong\u003e The Turning Point Propellers 11100801 Hustler Hub Kit includes 1 unit of the hub kit assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hub kit reduce propeller vibration?\u003c\/strong\u003e Yes, the 11100801 Hustler Hub Kit is designed to minimize propeller vibration and chatter during operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Turning Point 11100801 an OEM or aftermarket part?\u003c\/strong\u003e The 11100801 Hustler Hub Kit is manufactured by Turning Point Propellers under their own part number for propeller hub replacement.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031616659675,"sku":"TUR-208","price":25.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71H9DjIAeZL.jpg?v=1785215991"},{"product_id":"turning-point-propellers-hustler-hub-kit-11100601-206","title":"Turning Point Propellers Hustler Hub Kit 11100601 - 206","description":"\u003cp\u003eThe Turning Point Propellers Hustler Hub Kit 11100601 (size 206) is a replacement rubber hub kit designed to restore proper shock-absorbing function inside a propeller that uses an interchangeable hub system. The hub is the sacrificial component between the propeller blades and the propeller shaft: it flexes to absorb gear shock and sudden load changes from shifting and impacts, protecting the outboard or sterndrive gearcase from damage. Over time and use, hubs can spin, crack, or lose grip, causing a loss of thrust and increased vibration even though the propeller blades themselves are still in good condition.\u003c\/p\u003e\u003cp\u003eThis hub kit is built with corrosion resistant brass splines combined with a nylon body, giving it the strength to transmit engine torque to the propeller while the nylon portion provides the flexibility needed to cushion shock loads. Installing a fresh Hustler Hub Kit 11100601 eliminates spun hubs, reduces propeller vibration and chatter, and ends the cracking that develops in worn hub material, restoring smooth power transfer from the drive to the water.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11100601\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Kit Size:\u003c\/strong\u003e 206\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass and nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Resistance:\u003c\/strong\u003e Brass splines resist corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Turning Point Propellers Hustler Hub Kit 11100601 used for?\u003c\/strong\u003e It replaces the internal rubber hub inside a propeller that uses an interchangeable hub system, restoring the shock-absorbing cushion between the propeller and the propeller shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is hub kit 11100601?\u003c\/strong\u003e This Turning Point hub kit is size 206, matching the hub sizing used across Turning Point's Hustler hub system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 11100601 hub kit made from?\u003c\/strong\u003e It combines corrosion resistant brass splines with a nylon body, giving durable torque transfer along with the flex needed to absorb shock loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Turning Point 11100601 hub kit weigh?\u003c\/strong\u003e The 11100601 Hustler Hub Kit weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hub kit stop my propeller from spinning on the shaft?\u003c\/strong\u003e Yes, installing the 11100601 Hustler Hub Kit eliminates spun hubs by replacing worn hub material that has lost its grip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan a cracked or worn hub cause propeller vibration?\u003c\/strong\u003e Yes, a cracked or degraded hub causes propeller vibration and chatter, and replacing it with the 11100601 hub kit ends that cracking and restores smooth operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 11100601 hub kit protect my gearcase?\u003c\/strong\u003e Yes, the brass and nylon hub in kit 11100601 reduces gear shock, cushioning the impact transmitted to the engine or drive during shifting and sudden loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Turning Point Hustler Hub Kit 11100601 corrosion resistant?\u003c\/strong\u003e Yes, the splines in the 11100601 hub kit are made of corrosion resistant brass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace the whole propeller if the hub is worn?\u003c\/strong\u003e No, if your propeller uses an interchangeable hub system you can replace just the hub with kit 11100601 rather than the entire propeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Turning Point 11100601 kit include?\u003c\/strong\u003e The 11100601 kit includes the replacement Hustler hub components (brass splines and nylon hub body) sized to fit hub size 206.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031616725211,"sku":"TUR-206","price":25.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71fn76VoxgL.jpg?v=1785215991"},{"product_id":"turning-point-propellers-11100701-hustler-hub-kit-207-for-evinrude-outboard-propellers","title":"Turning Point Propellers 11100701 Hustler Hub Kit - 207 for Evinrude Outboard Propellers","description":"\u003cp\u003eThe Turning Point Propellers 11100701 Hustler Hub Kit (207) is a replacement hub system designed to restore proper shock-absorbing engagement between a propeller and the propeller shaft on Evinrude outboard propellers. Over time, the rubber or composite hub inside a propeller can spin, crack, or wear out from repeated gear shock, allowing the propeller to slip on the shaft and lose power transfer. This hub kit replaces that worn component, reducing gear shock and engine\/drive damage while minimizing propeller vibration and chatter for a smoother, more efficient ride.\u003c\/p\u003e\u003cp\u003eThe kit uses corrosion resistant brass splines paired with a nylon hub body, combining strength at the wear points with the flexibility needed to absorb shifting shock. Installing the correct hub kit eliminates spun hubs and ends hub cracking, both common failure points that force boaters to replace an otherwise good propeller. Because the hub is a separate serviceable component, rebuilding a propeller with the 207 Hustler Hub Kit is a cost-effective alternative to buying a new propeller when the blades and body are still in good condition.\u003c\/p\u003e\u003cp\u003eThis hub kit is intended for use with Evinrude outboard propellers compatible with the 207 hub size. Always confirm the hub kit model number matches the specific propeller being rebuilt before installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11100701\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Model:\u003c\/strong\u003e 207\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Hustler Hub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 1 x 1 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Corrosion resistant brass splines with nylon hub body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200625\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Evinrude Outboard Propeller Hub Kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eEvinrude outboard propellers using the 207 Hustler Hub size\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Turning Point 11100701 Hustler Hub Kit do?\u003c\/strong\u003e The 11100701 Hustler Hub Kit (207) replaces the internal hub inside a propeller so it can properly absorb gear shock and transfer power from the shaft to the blades again, instead of letting the propeller spin freely on a worn-out hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hub kit compatible with my propeller?\u003c\/strong\u003e The Turning Point 207 Hustler Hub Kit is designed for Evinrude outboard propellers that use the 207 hub size, so confirm the hub size matches your specific propeller before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat problem does a spun hub cause?\u003c\/strong\u003e A spun hub lets the propeller rotate independently of the shaft, so power from the engine no longer reaches the blades efficiently; the 11100701 Hustler Hub Kit eliminates spun hubs by replacing the worn hub with a new one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hub kit made of?\u003c\/strong\u003e The 207 Hustler Hub Kit uses corrosion resistant brass splines combined with a nylon hub body, giving it strength at the shaft connection while retaining the flexibility to absorb shock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit reduce propeller vibration?\u003c\/strong\u003e Yes, replacing a worn or damaged hub with the Turning Point 11100701 Hustler Hub Kit minimizes propeller vibration and chatter caused by a loose or cracked original hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 11100701 hub kit weigh?\u003c\/strong\u003e The Turning Point 11100701 Hustler Hub Kit weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this hub kit?\u003c\/strong\u003e The 11100701 Hustler Hub Kit measures 1 x 1 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs rebuilding a propeller with a new hub cheaper than buying a new propeller?\u003c\/strong\u003e Replacing just the hub with the 207 Hustler Hub Kit is a cost-effective way to restore a propeller with good blades and body, rather than purchasing an entirely new propeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hub kit prevent future hub cracking?\u003c\/strong\u003e The 11100701 Hustler Hub Kit is built to end hub cracking by replacing the damaged hub with new brass-splined, nylon-bodied construction designed to handle repeated gear shock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Turning Point 11100701 Hustler Hub Kit?\u003c\/strong\u003e The kit includes the replacement 207 Hustler Hub components needed to rebuild the propeller's hub assembly, with brass splines and a nylon hub body.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031616692443,"sku":"TUR-207","price":25.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71wirLkC7hL.jpg?v=1785215991"},{"product_id":"turning-point-propellers-hub-kit-21-part-11200100-for-mercury-mariner-and-force-outboards-9-9-25-hp","title":"Turning Point Propellers Hub Kit 21 (Part 11200100) for Mercury, Mariner and Force Outboards 9.9-25 HP","description":"\u003cp\u003eThe Turning Point Propellers Hub Kit 21, part number 11200100, is a replacement propeller hub system designed to restore the connection between the engine's drive shaft splines and the propeller. The inner splines of the hub adapt directly to the engine, while the outer hub is compatible with different propellers, letting an owner change props without buying a new hub each time. This can reduce the cost of switching propellers since the existing hub kit is reused across compatible props.\u003c\/p\u003e\u003cp\u003eHub Kit 21 is built with brass splines for corrosion resistance in marine environments. A properly seated hub kit absorbs shifting shock between the gearcase and the propeller, which helps reduce gear shock and engine or drive damage, and helps eliminate propeller vibration, chatter, hub cracking, and hub failure over time.\u003c\/p\u003e\u003cp\u003eThis hub kit is designed for a 10 spline propeller shaft configuration. It fits Force 25hp outboards ('95-'98), and Mercury and Mariner outboards including the 9.9 Bigfoot, 15hp Bigfoot, 18hp ('80-'85), 20hp ('86 and newer), and 25hp 2 stroke ('85 and newer). It is backed by a lifetime warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11200100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Kit Number:\u003c\/strong\u003e 21\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProp Shaft Spline Configuration:\u003c\/strong\u003e 10 spline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.69 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass splines, corrosion resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200151\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Brand Compatibility:\u003c\/strong\u003e Force, Mercury, Mariner\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eForce: 25hp ('95-'98)\u003c\/li\u003e\n\u003cli\u003eMercury and Mariner: 9.9 Bigfoot, 15hp Bigfoot, 18hp ('80-'85), 20hp ('86 and newer), 25hp 2 stroke ('85 and newer)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eThis hub kit is identified by its hub number (21) and 10 spline prop shaft configuration rather than a listed OEM cross-reference number. No OEM replacement numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does Hub Kit 21 fit?\u003c\/strong\u003e Hub Kit 21 (part number 11200100) fits Force 25hp outboards from '95-'98, and Mercury and Mariner outboards including the 9.9 Bigfoot, 15hp Bigfoot, 18hp ('80-'85), 20hp ('86 and newer), and 25hp 2 stroke ('85 and newer).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the prop shaft spline configuration for this hub kit?\u003c\/strong\u003e This hub kit uses a 10 spline prop shaft configuration, matching the inner splines of the hub to the engine's drive shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is Hub Kit 21 made of?\u003c\/strong\u003e The Turning Point Propellers Hub Kit 21 uses brass splines, which resist corrosion in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the hub kit weigh?\u003c\/strong\u003e Hub Kit 21, part number 11200100, weighs 0.69 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hub kit include a warranty?\u003c\/strong\u003e Yes, the Turning Point Propellers Hub Kit 21 is covered by a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this hub kit with different propellers?\u003c\/strong\u003e Yes. The outer hub on Hub Kit 21 is compatible with different propellers, so an owner can change props without replacing the hub kit itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat problems does a hub kit like this one solve?\u003c\/strong\u003e Installing Hub Kit 21 helps reduce gear shock and engine or drive damage, and helps eliminate propeller vibration, chatter, hub cracking, and hub failure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Hub Kit 21 the same as buying a whole new propeller?\u003c\/strong\u003e No. Hub Kit 11200100 replaces only the hub component that connects the propeller to the engine's splines, which can let an owner reuse or swap compatible propellers rather than buying an entirely new prop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hub kit fit Mercury 9.9 and 15hp Bigfoot models?\u003c\/strong\u003e Yes, Hub Kit 21 (11200100) is listed as fitting the Mercury and Mariner 9.9 Bigfoot and 15hp Bigfoot outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hub kit fit a Force 25hp outboard?\u003c\/strong\u003e Yes, part number 11200100 is compatible with Force 25hp outboards from the '95-'98 model years.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this hub kit?\u003c\/strong\u003e The product is the Turning Point Propellers Hub Kit 21 hub assembly, part number 11200100, with brass inner splines and an outer hub for mounting a compatible propeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the hub number the same as the part number?\u003c\/strong\u003e No. The hub is identified as Hub Kit 21, while the manufacturer part number for ordering is 11200100.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031616790747,"sku":"TUR-21","price":33.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41WfgsFtFeL.jpg?v=1785215991"},{"product_id":"turning-point-propellers-hustler-3-blade-aluminum-prop-housing-10-3-8-x-11-rh-21211110","title":"Turning Point Propellers Hustler 3-Blade Aluminum Prop Housing, 10-3\/8 x 11 RH, 21211110","description":"\u003cp\u003eThe Turning Point Propellers Hustler 21211110 is a 3-blade aluminum prop housing engineered as part of Turning Point's modular propeller system. It measures 10-3\/8 inches in diameter with an 11 inch pitch and is built for right-hand (RH) rotation. As a prop housing in the 500 Series modular lineup, it is designed to pair with a corresponding Turning Point hub kit, allowing boaters to interchange blades, hub kits, and pitch options to match performance needs without replacing an entire propeller assembly.\u003c\/p\u003e\u003cp\u003eConstruction is high-quality aluminum, chosen for durability and corrosion resistance in marine environments. The modular hub kit system used with this prop housing is compatible with competitors' hub and prop systems, and is interchangeable with Mercury Flow-Torq, Michigan Wheel XHS, and Solas Rubex hub kit systems, giving boaters flexibility when matching hardware already on hand. The design is engineered to support acceleration, top speed, and fuel efficiency for the boats it is fitted to.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 21211110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Prop Housing (3-Blade)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Count:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 10-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch:\u003c\/strong\u003e 11 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotation:\u003c\/strong\u003e Right-hand (RH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 12 x 12 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480100512\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Kit Compatibility:\u003c\/strong\u003e Interchangeable with Mercury Flow-Torq, Michigan Wheel XHS, and Solas Rubex hub kit systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis prop housing is designed for use with Turning Point's 500 Series modular hub kit system; specific engine make, horsepower, or year fitment is not specified.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Turning Point 21211110 prop housing?\u003c\/strong\u003e The Turning Point Hustler 21211110 is a 3-blade aluminum prop housing measuring 10-3\/8 inches in diameter with an 11 inch pitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 21211110 propeller left-hand or right-hand rotation?\u003c\/strong\u003e It is right-hand (RH) rotation, part number 21211110.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Hustler 21211110 prop housing made from?\u003c\/strong\u003e Aluminum, chosen for durability and corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 21211110 hub kit system work with other propeller brands?\u003c\/strong\u003e Yes. The 500 Series hub kit system used with the 21211110 prop housing is interchangeable with Mercury Flow-Torq, Michigan Wheel XHS, and Solas Rubex hub kit systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the blades or pitch be changed after installing this prop housing?\u003c\/strong\u003e Yes, the 21211110 is part of Turning Point's modular design, which allows interchanging blades, hub kits, and pitch options on the same housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 21211110 prop housing weigh?\u003c\/strong\u003e 2.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions for this item?\u003c\/strong\u003e The Turning Point 21211110 ships in a 12 x 12 x 6 inch package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the 21211110 propeller?\u003c\/strong\u003e 652480100512.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this come with a hub kit installed?\u003c\/strong\u003e The 21211110 is the prop housing (blade) component of Turning Point's 500 Series modular system, designed to pair with a corresponding hub kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 21211110 a genuine Turning Point Propellers part?\u003c\/strong\u003e Yes, it is manufactured by Turning Point Propellers under the Hustler product line, part number 21211110.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 21211110 prop housing fit my boat's engine?\u003c\/strong\u003e Specific engine make, horsepower, and year fitment are not specified for the 21211110; confirm shaft and hub compatibility with the 500 Series modular hub kit system before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat benefits does the 3-blade aluminum design offer?\u003c\/strong\u003e The 21211110's 3-blade aluminum design is engineered to support acceleration, top speed, and fuel efficiency.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031617118427,"sku":"TUR-2121-1110","price":76.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51fun_NFyhL_c63c5ae8-909b-463e-94c8-362a8a2a792b.jpg?v=1785215996"},{"product_id":"turning-point-propellers-hub-kit-11200200-for-evinrude-johnson-20-35-hp-aluminum-propellers-item-22","title":"Turning Point Propellers Hub Kit 11200200 for Evinrude\/Johnson 20-35 HP Aluminum Propellers, Item 22","description":"\u003cp\u003eThe Turning Point Propellers Hub Kit 11200200 (Item 22) is a replacement hub system designed to fit aluminum propellers used on Evinrude and Johnson outboards. Hub kits like this one are used when a propeller needs a new set of internal hub components, restoring the connection between the propeller and the gearcase drive shaft after wear or damage. This kit is interchangeable with Mercury Flo-Torq II, Michigan Wheel XHS, and Solas Rubex hub systems, giving boat owners flexibility when sourcing a compatible hub rather than being limited to a single hub-system brand.\u003c\/p\u003e\u003cp\u003eThis hub kit is built for aluminum propeller applications and is identified within the Turning Point Propellers lineup as Item 22. It is intended for use on Evinrude\/Johnson 2-stroke outboards across a range of horsepower ratings, from 20 hp through 35 hp, with specific model-year coverage varying by horsepower. Always confirm the horsepower and model year of your outboard against the fitment details before ordering to ensure the correct hub kit is selected.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11200200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Propeller Material:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.51 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200168\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchangeable Hub Systems:\u003c\/strong\u003e Mercury Flo-Torq II, Michigan Wheel XHS, Solas Rubex\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvinrude\/Johnson 2-stroke 20 hp\u003c\/li\u003e\n\u003cli\u003eEvinrude\/Johnson 2-stroke 25 hp ('84 \u0026amp; newer)\u003c\/li\u003e\n\u003cli\u003eEvinrude\/Johnson 2-stroke 25 hp commercial ('93 \u0026amp; newer)\u003c\/li\u003e\n\u003cli\u003eEvinrude\/Johnson 2-stroke 30 hp ('84 \u0026amp; newer)\u003c\/li\u003e\n\u003cli\u003eEvinrude\/Johnson 2-stroke 35 hp ('76 \u0026amp; newer)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers listed\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards does the Turning Point Propellers Hub Kit 11200200 fit?\u003c\/strong\u003e Hub Kit 11200200 (Item 22) fits Evinrude\/Johnson 2-stroke outboards at 20 hp, 25 hp ('84 \u0026amp; newer), 25 hp commercial ('93 \u0026amp; newer), 30 hp ('84 \u0026amp; newer), and 35 hp ('76 \u0026amp; newer).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hub kit designed for aluminum or stainless steel propellers?\u003c\/strong\u003e This kit, part number 11200200, is designed for aluminum propellers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hub kit work with a Mercury Flo-Torq II hub system?\u003c\/strong\u003e Yes, the Turning Point Propellers Hub Kit 11200200 is interchangeable with Mercury Flo-Torq II hub systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes hub kit 11200200 work with Michigan Wheel or Solas propellers?\u003c\/strong\u003e It is interchangeable with Michigan Wheel XHS and Solas Rubex hub systems, in addition to being a Turning Point Propellers part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Turning Point Propellers Hub Kit 11200200 weigh?\u003c\/strong\u003e This hub kit weighs 0.51 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the item number for this hub kit within the Turning Point Propellers lineup?\u003c\/strong\u003e Part number 11200200 is listed as Item 22 in the Turning Point Propellers hub kit lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 25 hp fitment apply to all model years?\u003c\/strong\u003e No, for the 25 hp Evinrude\/Johnson application, Hub Kit 11200200 fits 1984 and newer; a separate 25 hp commercial fitment covers 1993 and newer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The UPC for Turning Point Propellers Hub Kit 11200200 is 652480200168.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hub kit be used on a 35 hp Evinrude or Johnson outboard?\u003c\/strong\u003e Yes, Hub Kit 11200200 covers the 35 hp Evinrude\/Johnson 2-stroke application for 1976 and newer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Turning Point Propellers part?\u003c\/strong\u003e Yes, 11200200 is a genuine Turning Point Propellers part, listed as Item 22 in their hub kit range.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031618953435,"sku":"TUR-22","price":33.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31PL0qgj1QL.jpg?v=1785216019"},{"product_id":"turning-point-propellers-hub-kit-25-for-yamaha-20-30-hp-2-stroke-and-25-hp-4-stroke-outboards","title":"Turning Point Propellers Hub Kit #25 for Yamaha 20-30 HP 2-Stroke and 25 HP 4-Stroke Outboards","description":"\u003cp\u003eThe Turning Point Propellers Hub Kit #25 (part number 11200500) is a replacement hub kit used to secure a compatible propeller onto the prop shaft of select Yamaha outboards. The hub kit forms the connection point between the propeller and the shaft, allowing the propeller to be installed and to transmit power from the engine to the water. It is designed for use with Yamaha 2-stroke outboards rated 20 hp, 25 hp, and 30 hp, as well as Yamaha 4-stroke outboards rated 25 hp.\u003c\/p\u003e\u003cp\u003eThis is Hub Kit #25 in the Turning Point hub kit lineup, a designation used to match the kit to the correct propeller and shaft combination. The kit includes the components needed to complete a propeller installation, making it a straightforward option when replacing a worn or damaged hub kit rather than an entire propeller. Because the hub kit is matched to a specific engine brand and horsepower range, confirming your outboard's brand and horsepower before ordering ensures you receive the correct kit for your propeller installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11200500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Kit Number:\u003c\/strong\u003e 25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Yamaha 2-stroke 20 hp, 25 hp, 30 hp; Yamaha 4-stroke 25 hp outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200175\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.66 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYamaha 2-stroke outboards: 20 hp, 25 hp, 30 hp\u003c\/li\u003e\n\u003cli\u003eYamaha 4-stroke outboards: 25 hp\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards is the Turning Point Hub Kit #25 designed for?\u003c\/strong\u003e Hub Kit #25 (part number 11200500) is designed for Yamaha 2-stroke outboards rated 20 hp, 25 hp, and 30 hp, as well as Yamaha 4-stroke outboards rated 25 hp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a propeller hub kit do?\u003c\/strong\u003e A hub kit connects the propeller to the prop shaft, allowing the propeller to be mounted securely and to transmit engine power to the water. Turning Point Hub Kit #25 serves this function on the Yamaha outboards it is designed for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Turning Point Hub Kit #25 weigh?\u003c\/strong\u003e This hub kit weighs 0.66 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Hub Kit #25 the same as other Turning Point hub kits?\u003c\/strong\u003e No. Turning Point hub kits are numbered by kit (this one is Hub Kit #25, part number 11200500) and each number is matched to a specific engine brand and horsepower range, so kits are not interchangeable between different hub kit numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hub kit fit 4-stroke Yamaha outboards?\u003c\/strong\u003e Yes, part number 11200500 fits Yamaha 4-stroke outboards rated 25 hp, in addition to Yamaha 2-stroke outboards rated 20, 25, or 30 hp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Turning Point Hub Kit #25?\u003c\/strong\u003e Hub Kit #25 includes the components needed to install a compatible propeller onto the prop shaft on the Yamaha outboards it is designed for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hub kit work on a 30 hp Yamaha 4-stroke outboard?\u003c\/strong\u003e Part number 11200500 is designed for Yamaha 4-stroke outboards rated 25 hp specifically; its 2-stroke fitment covers 20, 25, and 30 hp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Turning Point Hub Kit #25?\u003c\/strong\u003e The UPC for this hub kit (part number 11200500) is 652480200175.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Turning Point Hub Kit #25 a genuine Turning Point Propellers part?\u003c\/strong\u003e Yes, Hub Kit #25 is a genuine Turning Point Propellers part with manufacturer part number 11200500.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install this hub kit myself?\u003c\/strong\u003e Hub Kit #25 includes the components needed for propeller installation on compatible Yamaha outboards, making it suitable for a standard propeller hub replacement.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031618986203,"sku":"TUR-25","price":33.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41cAwFj1HbL.jpg?v=1785216020"},{"product_id":"turning-point-propellers-hub-kit-26-11200600-for-suzuki-dt-df-and-evinrude-johnson-outboard-propellers","title":"Turning Point Propellers Hub Kit #26 (11200600) for Suzuki DT\/DF and Evinrude\/Johnson Outboard Propellers","description":"\u003cp\u003eThe Turning Point Propellers Hub Kit #26 (part number 11200600) is a replacement rubber hub kit used to re-fit a Turning Point stainless steel propeller onto the propeller shaft after the original hub has worn out or spun. The hub is the rubber bushing system inside a propeller that absorbs shock and allows the prop to slip slightly under sudden load, protecting the lower unit and shaft from damage on impact. Over time and use, this rubber component can wear, crack, or spin loose inside the propeller barrel, which shows up as a loss of thrust or a propeller that no longer engages the shaft properly. Hub Kit #26 replaces that worn hub so the existing propeller can be put back into service without buying a new prop.\u003c\/p\u003e\u003cp\u003eThis hub kit is sized for a 10-spline propeller shaft, with a 14-spline configuration for Evinrude\/Johnson applications. It is designed to fit Suzuki DT 2-stroke 20, 25, 25C, 30, and 30C outboards ('87 and newer) and Suzuki DF 4-stroke 25hp and 30hp outboards, as well as Evinrude\/Johnson 2-stroke 20hp, 25hp ('84 and newer), 25hp commercial ('93 and newer), 30hp ('84 and newer), and 35hp ('76 and newer) outboards. Confirm your propeller's hub kit number matches #26 before ordering, since hub kits are sized to a specific propeller barrel and are not universal across all Turning Point propellers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11200600\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Kit Number:\u003c\/strong\u003e 26\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePropeller Shaft Spline:\u003c\/strong\u003e 10-spline (14-spline for Evinrude\/Johnson)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200182\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Evinrude Outboard Propellers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuzuki DT 2-stroke: 20hp, 25hp, 25C, 30hp, 30C ('87 and newer)\u003c\/li\u003e\n\u003cli\u003eSuzuki DF 4-stroke: 25hp, 30hp\u003c\/li\u003e\n\u003cli\u003eEvinrude\/Johnson 2-stroke: 20hp, 25hp ('84 and newer), 25hp commercial ('93 and newer), 30hp ('84 and newer), 35hp ('76 and newer)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Turning Point Hub Kit #26 used for?\u003c\/strong\u003e Hub Kit #26 (part number 11200600) replaces the worn rubber hub inside a compatible Turning Point propeller so the existing propeller can be reused instead of replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich outboards is Hub Kit #26 compatible with?\u003c\/strong\u003e This hub kit fits Suzuki DT 2-stroke 20hp, 25hp, 25C, 30hp, and 30C outboards ('87 and newer), Suzuki DF 4-stroke 25hp and 30hp outboards, and Evinrude\/Johnson 2-stroke 20hp, 25hp, 25hp commercial, 30hp, and 35hp outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hub kit work with Evinrude and Johnson engines of any year?\u003c\/strong\u003e For Evinrude\/Johnson applications, Hub Kit #26 fits 25hp models from 1984 and newer, 25hp commercial models from 1993 and newer, 30hp models from 1984 and newer, and 35hp models from 1976 and newer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat spline count does Hub Kit #26 use?\u003c\/strong\u003e Hub Kit #26 (11200600) is built for a 10-spline propeller shaft, with a 14-spline version used for Evinrude\/Johnson applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Turning Point Hub Kit #26 weigh?\u003c\/strong\u003e The Turning Point Hub Kit #26, part number 11200600, weighs 1.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill Hub Kit #26 fit any Turning Point propeller?\u003c\/strong\u003e No. Hub kits are matched to a specific propeller barrel size, so only propellers designated for hub kit #26 will accept part number 11200600.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a propeller hub kit actually replace?\u003c\/strong\u003e It replaces the rubber hub assembly inside the propeller barrel, which is the component that allows the propeller to slip under shock load and protect the drivetrain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Hub Kit #26 a genuine Turning Point Propellers part?\u003c\/strong\u003e Yes, part number 11200600 is a genuine Turning Point Propellers hub kit, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my propeller needs hub kit #26 versus a different hub kit?\u003c\/strong\u003e Check the hub kit number stamped on or specified for your propeller; only propellers designated for hub kit 26 will match part number 11200600.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Suzuki DF 4-stroke fitment apply to all horsepower ratings?\u003c\/strong\u003e For Suzuki DF 4-stroke outboards, Hub Kit #26 (11200600) is listed for 25hp and 30hp models only.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031619018971,"sku":"TUR-26","price":33.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41WfgsFtFeL_5f790667-7cf7-44ec-bf1b-445b4b6fae2e.jpg?v=1785216021"},{"product_id":"turning-point-propellers-aluminum-hub-kit-28-honda-bf25-bf30-nissan-tohatsu-25-30hp-mercury-mariner-4-stroke-25-30hp","title":"Turning Point Propellers Aluminum Hub Kit #28 - Honda BF25\/BF30, Nissan \u0026 Tohatsu 25-30hp, Mercury \u0026 Mariner 4-Stroke 25-30hp","description":"\u003cp\u003eThis is an aluminum propeller hub kit, hub number 28, designed to adapt a compatible propeller to a 10 spline prop shaft on select outboard engines. Hub kits like this one carry the drive connection between the engine's prop shaft and the propeller, absorbing shock loads during operation and allowing the propeller to be mounted, removed, or serviced independently of the shaft itself. The kit is built from aluminum for durable, reliable service in the marine environment.\u003c\/p\u003e\u003cp\u003eThis hub kit is compatible with Honda BF25 and BF30 outboards, Nissan and Tohatsu 25hp and 30hp outboards, and Mercury and Mariner 4 stroke outboards (2006 and newer, cotter pin shaft) in the 25hp and 30hp range. Always confirm your engine's prop shaft spline count and hub compatibility before ordering to ensure correct fitment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11200800\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Kit Number:\u003c\/strong\u003e 28\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Propeller Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProp Shaft Spline Count:\u003c\/strong\u003e 10 spline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.78 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Fitment - Honda:\u003c\/strong\u003e BF25, BF30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Fitment - Nissan \u0026amp; Tohatsu:\u003c\/strong\u003e 25hp, 30hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Fitment - Mercury \u0026amp; Mariner:\u003c\/strong\u003e 4 stroke (2006 \u0026amp; newer, cotter pin shaft), 25hp, 30hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200199\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHonda BF25, BF30 (hub 28, 10 spline prop shaft)\u003c\/li\u003e\n\u003cli\u003eNissan and Tohatsu 25hp, 30hp (hub 28, 10 spline prop shaft)\u003c\/li\u003e\n\u003cli\u003eMercury and Mariner 4 stroke, 2006 and newer, cotter pin shaft, 25hp and 30hp (hub 28, 10 spline prop shaft)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does this Turning Point hub kit fit?\u003c\/strong\u003e Hub kit 11200800 (hub number 28) fits Honda BF25 and BF30 outboards, Nissan and Tohatsu 25hp and 30hp outboards, and Mercury and Mariner 4 stroke outboards from 2006 and newer with a cotter pin shaft, in the 25hp and 30hp range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hub kit compatible with Mercury 25hp and 30hp outboards?\u003c\/strong\u003e Yes, hub kit 11200800 fits Mercury and Mariner 4 stroke outboards built 2006 and newer with a cotter pin shaft, in 25hp and 30hp sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the hub kit made from?\u003c\/strong\u003e The Turning Point hub kit 11200800 is made from aluminum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this hub kit weigh?\u003c\/strong\u003e This hub kit weighs 0.78 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is hub number 28?\u003c\/strong\u003e Hub number 28 refers to the specific hub size and spline configuration used in Turning Point hub kit 11200800, which is built for a 10 spline prop shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hub kit work with a 10 spline prop shaft?\u003c\/strong\u003e Yes, Turning Point hub kit 11200800 is designed for engines with a 10 spline prop shaft, including the listed Honda, Nissan, Tohatsu, Mercury, and Mariner outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hub kit be used with other propeller hub systems?\u003c\/strong\u003e Turning Point hub kit 11200800 is interchangeable with Mercury Flo-Torq II, Michigan Wheel XHS, and Solas Rubex hub systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a propeller hub kit do?\u003c\/strong\u003e A propeller hub kit, such as Turning Point's hub 28 kit (part number 11200800), forms the connection between the propeller and the engine's prop shaft, absorbing shock loads and allowing the propeller to be mounted or removed for service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hub kit compatible with Nissan and Tohatsu 25hp and 30hp engines?\u003c\/strong\u003e Yes, hub kit 11200800 is built to fit Nissan and Tohatsu outboards rated at 25hp and 30hp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hub kit fit a Honda BF25 or BF30?\u003c\/strong\u003e Yes, Turning Point hub kit 11200800 is compatible with Honda BF25 and BF30 outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this hub kit?\u003c\/strong\u003e This listing is for the Turning Point hub kit 11200800 itself, hub number 28, sized for a 10 spline prop shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an aftermarket or genuine Turning Point part?\u003c\/strong\u003e Hub kit 11200800 is a genuine Turning Point Propellers part, sold under Turning Point's own part number.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031619084507,"sku":"TUR-28","price":33.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41yRh7f_xRL.jpg?v=1785216022"},{"product_id":"turning-point-propellers-hub-kit-500-for-yamaha-60-100hp-2-stroke-and-75-100hp-4-stroke-outboards-part-11500000","title":"Turning Point Propellers Hub Kit 500 for Yamaha 60-100HP 2-Stroke and 75-100HP 4-Stroke Outboards, Part 11500000","description":"\u003cp\u003eThe Turning Point Propellers Hub Kit 500 (part number 11500000) is a replaceable hub system that lets boaters swap propellers without buying a new hub every time. The kit's inner splines adapt directly to the engine's 13-spline prop shaft, while the outer hub accepts a range of interchangeable propellers, so a single hub kit can support multiple prop changes over the life of the outboard.\u003c\/p\u003e\u003cp\u003eInside the hub, corrosion-resistant brass splines absorb gear shock and reduce strain on the engine and drive during shifting and impact events such as striking debris. This shock-absorbing design also cuts down on propeller vibration, chatter, and the cracking or failure that can occur in a hub subjected to repeated stress. Because the hub itself takes the wear, boaters can replace just the hub kit instead of the entire propeller assembly, which lowers the long-term cost of propeller ownership.\u003c\/p\u003e\u003cp\u003eHub Kit 500 is built for Yamaha High Thrust T50 and FT60 outboards, Yamaha 2-stroke engines from 60 to 100 hp, and Yamaha 4-stroke engines from 75 to 100 hp, fitting engines with 4.25 inch or 4.75 inch gearcases. It is functionally compatible with Michigan Wheel XHS and Mercury Flo Torq hub kit systems and works with Turning Point, Mercury, Solas, and Michigan Wheel interchangeable propellers, while offering easier installation and improved durability and shock absorption compared to those systems. The kit pairs with propeller part number 21431911 for this Yamaha application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11500000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Kit Number:\u003c\/strong\u003e 500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Fitment:\u003c\/strong\u003e Yamaha High Thrust T50 and FT60; 2-stroke 60-100 hp; 4-stroke 75-100 hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGearcase Diameter:\u003c\/strong\u003e 4.25 inches or 4.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProp Shaft Spline Count:\u003c\/strong\u003e 13 spline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Propeller Part Number:\u003c\/strong\u003e 21431911\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Hub Kit Systems:\u003c\/strong\u003e Michigan Wheel XHS, Mercury Flo Torq\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass inner splines, corrosion-resistant hub construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200496\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYamaha High Thrust T50 and FT60\u003c\/li\u003e\n\u003cli\u003eYamaha 2-stroke outboards, 60 to 100 hp\u003c\/li\u003e\n\u003cli\u003eYamaha 4-stroke outboards, 75 to 100 hp\u003c\/li\u003e\n\u003cli\u003eEngines with 4.25 inch or 4.75 inch gearcases\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards does the Turning Point Hub Kit 500 fit?\u003c\/strong\u003e Hub Kit 500, part number 11500000, fits Yamaha High Thrust T50 and FT60 outboards, Yamaha 2-stroke engines from 60 to 100 hp, and Yamaha 4-stroke engines from 75 to 100 hp on engines with a 4.25 inch or 4.75 inch gearcase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat propeller works with Hub Kit 500?\u003c\/strong\u003e Propeller part number 21431911 is the matching prop for the Turning Point Hub Kit 500 on its supported Yamaha engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Turning Point Hub Kit 500 weigh?\u003c\/strong\u003e The Turning Point Hub Kit 500 (part 11500000) weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hub kit interchangeable with Michigan Wheel or Mercury hub systems?\u003c\/strong\u003e Yes, Hub Kit 500 is compatible with Michigan Wheel XHS and Mercury Flo Torq hub kit systems, and it also works with Turning Point, Mercury, Solas, and Michigan Wheel interchangeable propellers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the hub splines made from?\u003c\/strong\u003e The inner splines of the Turning Point Hub Kit 500 are made from corrosion-resistant brass, which helps the hub hold up in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I replace just the hub kit instead of the whole propeller?\u003c\/strong\u003e A hub kit like the Turning Point 11500000 absorbs gear shock and vibration so the hub wears instead of the propeller or drive components, letting you replace only the hub and reuse or swap propellers rather than buying an entirely new prop assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hub kit come with a warranty?\u003c\/strong\u003e The Turning Point Hub Kit 500 is backed by a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat problems does this hub kit prevent?\u003c\/strong\u003e Hub Kit 500 is designed to eliminate propeller vibration and chatter, prevent hub cracking and failure, and reduce gear shock and damage to the engine or drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many splines does the prop shaft need for this hub kit?\u003c\/strong\u003e The Turning Point Hub Kit 500 is built for a 13 spline prop shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Turning Point Hub Kit 500?\u003c\/strong\u003e The kit includes the complete hub assembly (part 11500000) with inner splines that fit the engine and an outer hub designed to accept compatible propellers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Turning Point Hub Kit 500 genuine Turning Point Propellers equipment?\u003c\/strong\u003e Yes, part number 11500000 is manufactured by Turning Point Propellers as hub kit number 500.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031619444955,"sku":"TUR-500","price":52.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41JNo7N_04L.jpg?v=1785216028"},{"product_id":"turning-point-propellers-11500100-501-hustler-hub-kit-for-mercruiser-alpha-one-and-bravo-one-drives-1983-and-newer","title":"Turning Point Propellers 11500100 501 Hustler Hub Kit for MerCruiser Alpha One and Bravo One Drives (1983 and Newer)","description":"\u003cp\u003eThe Turning Point Propellers 11500100 is a 501 Hustler Hub Kit engineered to protect the drivetrain of MerCruiser Alpha One and Bravo One drives (1983 and newer) from shock loading and vibration. The hub kit fits between the propeller and the propeller shaft, absorbing the sudden torque spikes that occur during gear engagement, shifting, and sharp throttle changes. By cushioning these impacts, it reduces gear shock and helps prevent damage to the engine and drive components over time.\u003c\/p\u003e\u003cp\u003eVibration and chatter at the propeller are also minimized, giving a smoother ride and reducing wear on shaft bearings and seals. The kit is built with corrosion resistant brass splines and a nylon body, a combination that stands up to constant exposure to saltwater and freshwater environments while maintaining a reliable, low-slip connection between the propeller and shaft. This construction is designed to eliminate spun hubs, a common failure mode where the inner hub spins freely inside the propeller barrel and causes loss of thrust, and it also helps end hub cracking that can occur with lower-quality hub systems.\u003c\/p\u003e\u003cp\u003eThis hub kit is sized as a 501 and is designed specifically for MerCruiser Alpha One and Bravo One drives, 1983 and newer. It is finished in black and supplied as a single unit for one propeller installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11500100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Size:\u003c\/strong\u003e 501\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass splines and nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.8 x 2.85 x 2.85 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200502\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Single (1 count)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMerCruiser Alpha One and Bravo One drives, 1983 and newer\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 11500100 hub kit fit?\u003c\/strong\u003e This 501 hub kit is designed for MerCruiser Alpha One and Bravo One drives, 1983 and newer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a propeller hub kit used for?\u003c\/strong\u003e A hub kit sits between the propeller and the propeller shaft to absorb shock and vibration during gear shifting and throttle changes, reducing stress on the engine and drive components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hub does part number 11500100 use?\u003c\/strong\u003e The 11500100 is a 501 size hub, matched specifically to MerCruiser Alpha One and Bravo One drives, 1983 and newer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials is this hub kit made from?\u003c\/strong\u003e It is built with corrosion resistant brass splines and a nylon body, a combination suited to continuous exposure to boating environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hub kit stop my propeller from spinning on the shaft?\u003c\/strong\u003e Yes, the design of the 11500100 hub kit is intended to eliminate spun hubs, where the inner hub loses grip and spins freely inside the propeller barrel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hub kit help with propeller vibration?\u003c\/strong\u003e Yes, the 501 hub kit minimizes propeller vibration and chatter by cushioning the connection between the shaft and propeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 11500100 hub kit weigh?\u003c\/strong\u003e The Turning Point Propellers 11500100 hub kit weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this hub kit?\u003c\/strong\u003e The 11500100 hub kit is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hub kit sold as a single unit?\u003c\/strong\u003e Yes, the 11500100 is sold as a single hub kit for one propeller installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hub kit be used on drives other than MerCruiser Alpha One and Bravo One?\u003c\/strong\u003e The 11500100 501 hub kit is specified for MerCruiser Alpha One and Bravo One drives, 1983 and newer; other drive and engine combinations use different Turning Point hub part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 11500100 hub kit?\u003c\/strong\u003e The hub kit measures 5.8 x 2.85 x 2.85 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hub kit help prevent hub cracking?\u003c\/strong\u003e Yes, the brass-spline and nylon construction of the 11500100 is designed to end hub cracking that can occur with lower-quality hub systems.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031619477723,"sku":"TUR-501","price":52.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41AmC8ZmgcL.jpg?v=1785216028"},{"product_id":"turning-point-propellers-hub-kit-11500200-for-suzuki-dt-2-stroke-outboards-150-225-hp","title":"Turning Point Propellers Hub Kit 11500200 for Suzuki DT 2-Stroke Outboards 150-225 HP","description":"\u003cp\u003eThe Turning Point Propellers Hub Kit, manufacturer part number 11500200, is a complete propeller mounting kit engineered for Suzuki DT 2-stroke outboards from 150 hp to 225 hp. It supplies the inner splined adapter and outer hub components needed to mount a propeller onto the outboard's propeller shaft, transferring engine power to the propeller while isolating the drivetrain from shock loads. The inner splines are made from corrosion-resistant brass, built to withstand sustained exposure to salt and fresh water without degrading the fit between the shaft and hub.\u003c\/p\u003e\u003cp\u003eBecause the outer hub is compatible with Michigan Wheel XHS and Mercury Flo Torq hub kits and their interchangeable propellers, boat owners can swap in a compatible replacement propeller without having to replace the entire hub kit each time. The kit is designed to reduce gear shock transmitted from the propeller back into the engine and lower unit, and it helps eliminate propeller vibration, chatter, and hub cracking or failure that can occur with worn or incompatible hub systems. All components needed for installation are included, and the kit is backed by a lifetime warranty from Turning Point Propellers. This hub kit weighs 2 pounds as packaged.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11500200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Propeller Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Suzuki DT 2 stroke outboards, 150 hp to 225 hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass (inner splines)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Michigan Wheel XHS and Mercury Flo Torq hub kits and interchangeable propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSuzuki DT 2 stroke outboards: 150 hp to 225 hp\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboard engines does hub kit 11500200 fit?\u003c\/strong\u003e This Turning Point Propellers hub kit fits Suzuki DT 2-stroke outboards rated from 150 hp to 225 hp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this hub kit?\u003c\/strong\u003e Hub kit 11500200 includes all the components needed to mount a compatible propeller onto the Suzuki DT outboard's propeller shaft, so no separate hardware purchase is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hub kit work with Michigan Wheel or Mercury propellers?\u003c\/strong\u003e Yes, hub kit 11500200 is compatible with Michigan Wheel XHS and Mercury Flo Torq hub kits and their interchangeable propellers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the hub kit splines made from?\u003c\/strong\u003e The inner splines on Turning Point Propellers hub kit 11500200 are brass, selected for corrosion resistance in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does hub kit 11500200 weigh?\u003c\/strong\u003e This Turning Point Propellers hub kit weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hub kit reduce propeller vibration?\u003c\/strong\u003e Yes, hub kit 11500200 is designed to eliminate propeller vibration and chatter as well as hub cracking or failure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I switch to a different propeller later without replacing the whole hub kit?\u003c\/strong\u003e The outer hub of Turning Point Propellers hub kit 11500200 is compatible with different interchangeable propellers, so it can accommodate a replacement prop without swapping the entire hub kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs hub kit 11500200 a genuine Turning Point Propellers part?\u003c\/strong\u003e Yes, it carries Turning Point Propellers' own manufacturer part number 11500200 rather than being a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on this hub kit?\u003c\/strong\u003e Turning Point Propellers backs hub kit 11500200 with a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a hub kit like 11500200 protect the engine and drive?\u003c\/strong\u003e By absorbing shock between the propeller and the drivetrain, hub kit 11500200 reduces gear shock and helps protect the engine and lower unit from propeller impact damage.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031619510491,"sku":"TUR-502","price":52.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41Lq-l9Y3cL.jpg?v=1785216029"},{"product_id":"turning-point-propellers-503-hustler-hub-kit-11500300-for-omc-cobra-400-stern-drives-2-3-to-3-0l-1978-89","title":"Turning Point Propellers 503 Hustler Hub Kit 11500300 for OMC Cobra 400 Stern Drives 2.3 to 3.0L (1978-89)","description":"\u003cp\u003eThe Turning Point Propellers 503 Hustler Hub Kit (part number 11500300) is a rebuildable rubber hub system built to protect your drivetrain from the shock loads a propeller transmits during acceleration, gear shifts, and impacts. Rather than replacing an entire propeller when the hub wears out, spins, or cracks, this hub kit lets you rebuild the propeller's hub assembly so the prop keeps performing like new. The kit uses corrosion resistant brass splines paired with a nylon hub body, a combination chosen to stand up to constant saltwater and freshwater exposure while still absorbing vibration and chatter transmitted from the propeller to the gear case and engine. Because the hub is a separate rebuildable component, this system eliminates the common failure points of spun hubs and hub cracking that otherwise force a full propeller replacement.\u003c\/p\u003e\u003cp\u003eThis is the 503 hub kit, and it is designed for OMC Cobra 400 stern drives with 2.3 to 3.0L engines (1978-89). The kit ships as a complete hub rebuild set, listed as the Turning Point Propeller 11500300 Hustler Hub - 503.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11500300\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Kit Number:\u003c\/strong\u003e 503\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Turning Point Propeller 11500300 Hustler Hub - 503\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass and nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.8 x 2.85 x 2.85 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 6.1 x 2.95 x 2.64 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200526\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e OMC Cobra 400 stern drives 2.3 to 3.0L (1978-89)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eHub kit 503 (part 11500300) is designed for OMC Cobra 400 stern drives, 2.3 to 3.0L, model years 1978-89.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boats or drives does the Turning Point 503 hub kit fit?\u003c\/strong\u003e The 503 hub kit, part number 11500300, is designed for OMC Cobra 400 stern drives with 2.3 to 3.0L engines, covering model years 1978-89.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in this hub kit?\u003c\/strong\u003e Part 11500300 ships as the Turning Point Propeller Hustler Hub kit 503, a complete rebuildable hub assembly for compatible OMC Cobra 400 stern drive propellers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 503 hub kit made of?\u003c\/strong\u003e It uses corrosion resistant brass splines combined with a nylon hub body, a material combination chosen for durability in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hub kit help with a spun propeller hub?\u003c\/strong\u003e Yes, the 11500300 Hustler Hub kit is specifically designed to eliminate spun hubs and end hub cracking on compatible propellers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Turning Point 503 hub kit weigh?\u003c\/strong\u003e The 503 hub kit (part 11500300) weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hub kit reduce vibration from my propeller?\u003c\/strong\u003e Minimizing propeller vibration and chatter is one of the core functions of the 11500300 hub kit, along with reducing gear shock transmitted to the engine or drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace my whole propeller if the hub wears out?\u003c\/strong\u003e No, the 503 Hustler Hub kit lets you rebuild the hub assembly on a compatible propeller instead of replacing the entire prop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 11500300 hub kit?\u003c\/strong\u003e The item measures 5.8 x 2.85 x 2.85 inches, with package dimensions of 6.1 x 2.95 x 2.64 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 503 hub kit genuine Turning Point Propellers equipment?\u003c\/strong\u003e Yes, part number 11500300 is a genuine Turning Point Propellers hub kit, identified as the Hustler Hub - 503.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the hub material?\u003c\/strong\u003e The brass splines in the 11500300 hub kit are brass colored.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hub kits come in one package?\u003c\/strong\u003e Part 11500300 is sold as one complete hub kit per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 503 hub kit protect my drive from damage?\u003c\/strong\u003e Reducing gear shock and engine\/drive damage is a primary purpose of the Turning Point 503 hub kit, part number 11500300, by absorbing shock loads before they reach the drive.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031619543259,"sku":"TUR-503","price":52.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71NtMuYuZNL.jpg?v=1785216029"},{"product_id":"turning-point-propellers-504-hub-kit-11500400-volvo-penta-sx-omc-sx-cobra-19-spline-prop-shaft-94-and-newer","title":"Turning Point Propellers 504 Hub Kit 11500400 - Volvo Penta SX \u0026 OMC SX Cobra 19-Spline Prop Shaft ('94 and Newer)","description":"\u003cp\u003eThe Turning Point Propellers 504 Hub Kit (part number 11500400) is a replacement propeller hub system engineered for 19-spline prop shaft applications on Volvo Penta SX and OMC SX Cobra drives, 1994 and newer. It is not available for Volvo DuoProp or Aquamatic drives, so confirm your drive type before ordering.\u003c\/p\u003e\u003cp\u003eThis hub kit is built to protect your lower unit and propeller from the shock loads generated during shifting and sudden throttle changes. It uses corrosion-resistant brass splines paired with a nylon hub component to absorb gear shock and reduce engine and drive damage. The nylon element is designed to minimize propeller vibration and chatter for a smoother ride, while the overall hub design eliminates spun hubs and ends the hub cracking that can occur with worn or incompatible hub systems.\u003c\/p\u003e\u003cp\u003eFinished in brass, this kit weighs 2 pounds and is intended as a direct fit for boats running the 19-spline shaft configuration used on the specified Volvo Penta and OMC drives. Because propeller hub systems are drive- and spline-specific, matching the correct spline count and drive type is essential for proper installation and performance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11500400\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Kit Number:\u003c\/strong\u003e 504\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200533\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.8 x 2.85 x 2.85 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5.98 x 2.95 x 2.83 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass and nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpline Count:\u003c\/strong\u003e 19 spline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVolvo Penta SX and OMC SX Cobra, 19-spline prop shaft ('94 and newer)\u003c\/li\u003e\n\u003cli\u003eNot available for Volvo DuoProp or Aquamatic drives\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Turning Point Propellers 504 hub kit (part number 11500400) do?\u003c\/strong\u003e It replaces the propeller hub system, using corrosion-resistant brass splines and a nylon hub component to reduce gear shock and engine\/drive damage, minimize propeller vibration and chatter, eliminate spun hubs, and end hub cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich drives is part number 11500400 designed to fit?\u003c\/strong\u003e This hub kit fits Volvo Penta SX and OMC SX Cobra drives with a 19-spline prop shaft, for boats built in '94 and newer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill hub kit 11500400 work on a Volvo Penta DuoProp or Aquamatic drive?\u003c\/strong\u003e No, the Turning Point 504 hub kit is not available for Volvo DuoProp or Aquamatic drives; it is designed specifically for Volvo Penta SX and OMC SX Cobra drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many splines does the prop shaft need for this hub kit?\u003c\/strong\u003e The Turning Point 504 hub kit (11500400) is built for a 19-spline prop shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 504 hub kit made from?\u003c\/strong\u003e It is constructed with corrosion-resistant brass splines and a nylon hub component, finished in brass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does part number 11500400 weigh?\u003c\/strong\u003e The Turning Point 504 hub kit weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat problem does a propeller hub kit like the 504 solve?\u003c\/strong\u003e It reduces gear shock and engine\/drive damage, minimizes propeller vibration and chatter, eliminates spun hubs, and ends hub cracking that can result from a worn or mismatched hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11500400 hub kit a genuine Turning Point Propellers part?\u003c\/strong\u003e Yes, it is manufactured by Turning Point Propellers under part number 11500400 (kit number 504).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat year range of boats does the 504 hub kit cover?\u003c\/strong\u003e It is designed for Volvo Penta SX and OMC SX Cobra drives from '94 and newer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Turning Point 504 hub kit?\u003c\/strong\u003e The hub kit has a brass finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hub kits come in one package of part number 11500400?\u003c\/strong\u003e The Turning Point 504 hub kit is packaged as a single unit (1 item).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 11500400 hub kit be used on any 19-spline prop shaft?\u003c\/strong\u003e No, it is specifically designed for Volvo Penta SX and OMC SX Cobra 19-spline prop shafts and is not available for Volvo DuoProp or Aquamatic drives, so it should not be assumed to fit other 19-spline applications.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031619576027,"sku":"TUR-504","price":52.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/717haOWpbQL.jpg?v=1785216030"},{"product_id":"turning-point-propellers-505-hub-kit-for-40-150-hp-outboards-with-4-25-inch-gearcase","title":"Turning Point Propellers 505 Hub Kit for 40-150 HP Outboards with 4.25 Inch Gearcase","description":"\u003cp\u003eThe Turning Point Propellers 505 Hub Kit replaces the interchangeable rubber hub system inside a compatible aluminum or stainless propeller, allowing the propeller to be rebuilt and reused on the same engine rather than replaced outright. The kit is built around corrosion-resistant brass splines that transmit engine torque to the propeller while the surrounding hub material absorbs shock loads from shifting and impacts, protecting the gearcase and lower unit driveline from sudden shock damage.\u003c\/p\u003e\u003cp\u003eThis hub kit is sized for outboards in the 40 to 150 HP range that use a 4.25 inch gearcase, and it carries a lifetime warranty on many engine applications. It ships as a single hub kit unit intended for installation by a marine technician or an experienced DIYer replacing a worn propeller hub. Because the hub kit is matched to a specific propeller bore and spline configuration, confirming the propeller model before ordering ensures the correct fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11500500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Outboard HP Range:\u003c\/strong\u003e 40 to 150 HP outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGearcase Size:\u003c\/strong\u003e 4.25 inch gearcase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Corrosion-resistant brass splines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7 x 3 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 6.81 x 2.99 x 2.91 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200540\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty on many engine applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e40 to 150 HP outboards with a 4.25 inch gearcase\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Turning Point 505 hub kit fit?\u003c\/strong\u003e It is designed for 40 to 150 HP outboards that use a 4.25 inch gearcase, matching the propeller bore size to that gearcase range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Turning Point 505 hub kit?\u003c\/strong\u003e The kit contains one complete hub kit assembly with corrosion-resistant brass splines, sold as a single item for rebuilding one propeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the splines made from?\u003c\/strong\u003e The hub kit uses corrosion-resistant brass splines, chosen to withstand ongoing exposure to water and marine conditions while transmitting engine torque to the propeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 505 hub kit come with a warranty?\u003c\/strong\u003e Yes, the Turning Point 505 hub kit carries a lifetime warranty on many engine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is the Turning Point 505 hub kit?\u003c\/strong\u003e Item dimensions are 7 x 3 x 3 inches and it weighs 2 pounds; packaged dimensions are 6.81 x 2.99 x 2.91 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install this hub kit myself?\u003c\/strong\u003e The 505 hub kit is designed for straightforward installation into a compatible propeller, though matching the correct bore and spline configuration is important before installing it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 505 hub kit a genuine Turning Point Propellers part?\u003c\/strong\u003e Yes, part number 11500500 is a genuine Turning Point Propellers hub kit, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need a hub kit instead of a new propeller?\u003c\/strong\u003e A hub kit such as the Turning Point 505 lets you replace the worn shock-absorbing hub inside a propeller rather than buying an entirely new propeller, as long as the propeller blades are still in good condition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 505 hub kit fit any 40-150 HP outboard regardless of brand?\u003c\/strong\u003e The 505 hub kit is sized for the 4.25 inch gearcase used across the 40 to 150 HP outboard range; confirming your propeller's bore and gearcase size against this spec is recommended before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hub kits come in one order of part number 11500500?\u003c\/strong\u003e One order of the Turning Point 505 hub kit (part number 11500500) includes a single hub kit unit.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031619674331,"sku":"TUR-505","price":52.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51WA0h8AFNL.jpg?v=1785216031"},{"product_id":"turning-point-hub-kit-506-manufacturer-part-11500600-fits-suzuki-dt-75-140hp-df-60-70hp-outboards","title":"Turning Point Hub Kit 506, Manufacturer Part 11500600, Fits Suzuki DT 75-140HP \/ DF 60-70HP Outboards","description":"\u003cp\u003eThis Turning Point Hub Kit (506) is the connecting hardware that mounts a compatible propeller securely onto the engine shaft, giving the prop a precise, vibration-resistant fit for reliable power transfer. It is built for Suzuki outboards, covering '89 and newer DT 2 Stroke models from 75hp to 140hp and DF 4 Stroke models at 60hp and 70hp. The kit is engineered to work with a 15 spline prop shaft and is sized for use with a 13-1\/4 x 23 inch propeller on gearcases up to 4-1\/4 inches.\u003c\/p\u003e\u003cp\u003eBeyond fitting Turning Point propellers, this hub kit is built to work with competitors' hub and prop systems, including Mercury Flow-Torq, Michigan Wheel XHS, and Solas Rubex hub kit and prop systems, so it can be used as a direct swap-in on boats already running one of those systems. Construction uses durable materials suited to continual exposure to marine loads, vibration, and impact, so the hub absorbs shock between the propeller and shaft rather than transferring it directly into the drivetrain. Installation follows the same straightforward process as other outboard hub kit replacements, letting an owner replace a worn hub or upgrade a propeller without swapping the whole lower unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11500600\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Kit Number:\u003c\/strong\u003e 506\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Engine Brand:\u003c\/strong\u003e Suzuki\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e '89 \u0026amp; newer DT 2 Stroke 75hp to 140hp; DF 4 Stroke 60hp, 70hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Prop Systems:\u003c\/strong\u003e Mercury Flow-Torq, Michigan Wheel XHS, Solas Rubex hub kit \u0026amp; prop systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProp Shaft Spline:\u003c\/strong\u003e 15 spline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGearcase Size:\u003c\/strong\u003e 4-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Propeller Size:\u003c\/strong\u003e 13-1\/4 x 23 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200557\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuzuki DT 2 Stroke, '89 \u0026amp; newer, 75hp to 140hp\u003c\/li\u003e\n\u003cli\u003eSuzuki DF 4 Stroke, 60hp and 70hp\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eCompatible with Mercury Flow-Torq, Michigan Wheel XHS, and Solas Rubex hub kit \u0026amp; prop systems\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Turning Point Hub Kit 506 fit?\u003c\/strong\u003e Hub Kit 506 (part number 11500600) fits Suzuki outboards, specifically '89 and newer DT 2 Stroke models from 75hp to 140hp, and DF 4 Stroke models at 60hp and 70hp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a propeller hub kit actually do?\u003c\/strong\u003e A hub kit like the Turning Point 506 sits between the propeller and the engine shaft, providing the connection that transfers engine power to the prop while absorbing shock and vibration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hub kit work with a propeller from another brand?\u003c\/strong\u003e Yes. The Turning Point Hub Kit 506 is built to work with competitors' hub and prop systems, including Mercury Flow-Torq, Michigan Wheel XHS, and Solas Rubex hub kit and prop systems, not just Turning Point propellers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size propeller is this hub kit designed for?\u003c\/strong\u003e This hub kit (part number 11500600) is sized for use with a 13-1\/4 x 23 inch propeller on a gearcase up to 4-1\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many splines does the prop shaft need for the 506 hub kit?\u003c\/strong\u003e The 506 hub kit is engineered for a 15 spline prop shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Turning Point Hub Kit 506 weigh?\u003c\/strong\u003e This hub kit weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Turning Point Hub Kit 506 easy to install?\u003c\/strong\u003e Yes, it is designed for simple, hassle-free installation, allowing a propeller to be replaced or upgraded without removing the whole lower unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with part number 11500600?\u003c\/strong\u003e The listing covers the Turning Point Hub Kit 506 itself, which provides the hardware connecting a compatible propeller to a Suzuki outboard's shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Turning Point Hub Kit 506 an OEM part or an aftermarket part?\u003c\/strong\u003e It is a Turning Point aftermarket hub kit, manufactured to work as a direct replacement or upgrade for Mercury Flow-Torq, Michigan Wheel XHS, and Solas Rubex hub kit and prop systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is hub kit 506 made from?\u003c\/strong\u003e The Turning Point Hub Kit 506 is made from durable materials designed to withstand the rigors of marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Suzuki DF 60hp use the same hub kit as the DT models?\u003c\/strong\u003e Yes, Hub Kit 506 (part number 11500600) covers both the DF 4 Stroke 60hp and 70hp models as well as the '89 and newer DT 2 Stroke 75hp to 140hp range.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031619707099,"sku":"TUR-506","price":52.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/414IQn5hsUL.jpg?v=1785216031"},{"product_id":"turning-point-propellers-hub-kit-11500700-for-suzuki-df-four-stroke-outboards-150-300-hp","title":"Turning Point Propellers Hub Kit 11500700 for Suzuki DF Four-Stroke Outboards 150-300 HP","description":"\u003cp\u003eThe Turning Point Propellers Hub Kit, part number 11500700, is a replacement propeller hub kit engineered to restore smooth, shock-free power transfer between the drive shaft and propeller. It fits Suzuki DF four-stroke outboards rated 150 hp to 300 hp when used with Express 16 inch diameter propellers. The kit's inner splines are made of brass and conform to the motor's drive shaft, while the outer hub is compatible with a range of propeller accessories, allowing one hub kit to work across multiple compatible propellers rather than requiring a proprietary match.\u003c\/p\u003e\u003cp\u003eInstalling this hub kit reduces gear shock and helps prevent damage to the motor or drive caused by sudden load changes during shifting and acceleration. It also eliminates propeller vibration and chatter and guards against hub cracking and failure, common failure points in worn or OEM rubber hubs. Because it is also compatible with Michigan Wheel XHS and Mercury Flo Torq hub kits, and with all Michigan Wheel and Mercury interchangeable propellers, boat owners can standardize on this kit rather than sourcing brand-specific replacements. It carries a lifetime warranty, so a single purchase can replace repeated hub kit replacements over the life of the propeller.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11500700\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Kit Number:\u003c\/strong\u003e 507\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200564\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox Dimensions:\u003c\/strong\u003e 3 inches H x 3 inches W x 7 inches L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass splines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Michigan Wheel XHS and Mercury Flo Torq hub kits; all Michigan Wheel and Mercury interchangeable propellers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSuzuki DF four-stroke outboards, 150 hp to 300 hp (use Express 16 inch diameter propellers)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat propellers does the Turning Point 11500700 hub kit fit?\u003c\/strong\u003e This hub kit, Turning Point part number 11500700, fits Suzuki DF four-stroke outboards rated 150 hp to 300 hp when used with Express 16 inch diameter propellers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hub kit work with a Michigan Wheel or Mercury propeller?\u003c\/strong\u003e Yes. The 11500700 hub kit is compatible with Michigan Wheel XHS and Mercury Flo Torq hub kits, and with all Michigan Wheel and Mercury interchangeable propellers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hub kit made of?\u003c\/strong\u003e The inner splines of the Turning Point 11500700 hub kit are brass, which resists corrosion and conforms to the motor's drive shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this hub kit weigh?\u003c\/strong\u003e The Turning Point 11500700 hub kit weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the box dimensions for this hub kit?\u003c\/strong\u003e It ships in a box measuring 3 inches high by 3 inches wide by 7 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hub kit come with a warranty?\u003c\/strong\u003e Yes, the Turning Point 11500700 hub kit carries a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat problem does a hub kit solve on an outboard propeller?\u003c\/strong\u003e A worn or failed propeller hub causes vibration, chatter, and gear shock during shifting; the 11500700 hub kit replaces the hub to reduce gear shock and motor or drive damage and eliminate vibration, chatter, and hub cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Turning Point Propellers part?\u003c\/strong\u003e Yes, part number 11500700 is a genuine Turning Point Propellers hub kit, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this hub kit?\u003c\/strong\u003e The 11500700 hub kit includes the brass-splined inner hub components needed to rebuild a compatible propeller's hub assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hub kit be reused after installation?\u003c\/strong\u003e The 11500700 hub kit is designed as a lifetime-warranted replacement, so once installed it is intended to remain in service rather than be swapped repeatedly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hub kit specific to one propeller brand?\u003c\/strong\u003e No. While Turning Point Propellers manufactures the 11500700 hub kit, it is built to also fit Michigan Wheel and Mercury interchangeable propellers, not just Turning Point propellers.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031619739867,"sku":"TUR-507","price":56.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41TvIgajcgL.jpg?v=1785216031"},{"product_id":"turning-point-propellers-hub-kit-508-11500800-for-honda-bf200-bf225-bf250-outboards","title":"Turning Point Propellers Hub Kit 508 (11500800) for Honda BF200\/BF225\/BF250 Outboards","description":"\u003cp\u003eThe Turning Point Propellers Hub Kit 508 is a replacement propeller hub system that lets you mount a compatible propeller onto your outboard's drive shaft without needing a factory-matched hub. The kit's inner splines adapt to the engine, while the outer hub is compatible with different props, so the same hub kit can be reused when you switch to a new or replacement propeller instead of buying a whole new hub system each time. This design reduces gear shock and helps protect the engine and drive from the impact damage that can occur with a worn or mismatched hub.\u003c\/p\u003e\u003cp\u003eThe hub kit is built to eliminate propeller vibration, chatter, and hub cracking or failure, which are common symptoms of a deteriorating rubber hub. The splines are made from corrosion resistant brass for long service life in a marine environment. Because the hub kit separates the engine-side splines from the prop-side hub, buyers can save on future costs by only needing to replace a propeller rather than a complete prop-and-hub assembly.\u003c\/p\u003e\u003cp\u003eHub Kit 508 is compatible with the Honda BF200 outboard (2013 and newer), Honda BF225 outboard (2013 and newer), and Honda BF250 outboard (2012 and newer). Confirm your outboard model and year against this fitment before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11500800\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Hub Kit 508\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox Dimensions:\u003c\/strong\u003e 3 inches H x 3 inches W x 6 inches L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass splines, corrosion resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200656\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Outboards:\u003c\/strong\u003e Honda BF200 (2013 and newer), Honda BF225 (2013 and newer), Honda BF250 (2012 and newer)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHonda BF200 outboard, 2013 and newer\u003c\/li\u003e\n\u003cli\u003eHonda BF225 outboard, 2013 and newer\u003c\/li\u003e\n\u003cli\u003eHonda BF250 outboard, 2012 and newer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Turning Point Propellers Hub Kit 508 used for?\u003c\/strong\u003e Hub Kit 508 (part number 11500800) is a propeller hub system that mounts between an outboard's drive shaft and the propeller, allowing the propeller to be replaced without replacing the entire hub assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich outboards fit Hub Kit 508?\u003c\/strong\u003e Hub Kit 508 is compatible with the Honda BF200 outboard (2013 and newer), Honda BF225 outboard (2013 and newer), and Honda BF250 outboard (2012 and newer).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Turning Point Hub Kit 508 weigh?\u003c\/strong\u003e The Turning Point Propellers Hub Kit 508 weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the box dimensions of Hub Kit 508?\u003c\/strong\u003e Hub Kit 508 ships in a box measuring 3 inches high by 3 inches wide by 6 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the hub kit splines made from?\u003c\/strong\u003e The inner splines of Hub Kit 508 are made from corrosion resistant brass for durability in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Hub Kit 508 come with a warranty?\u003c\/strong\u003e Yes, the Turning Point Propellers Hub Kit 508 is covered by a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need a hub kit instead of just buying a new propeller?\u003c\/strong\u003e Hub Kit 508's inner splines adapt to the engine while the outer hub accepts different propellers, so once the hub kit is installed you can swap propellers without buying a new hub each time, which can save on the cost of a full replacement prop-and-hub assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat problems does the Turning Point Hub Kit 508 solve?\u003c\/strong\u003e This hub kit is designed to eliminate propeller vibration and chatter and to prevent hub cracking or failure, while reducing gear shock that can damage the engine or drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with Hub Kit 508?\u003c\/strong\u003e Hub Kit 508 includes the propeller hub kit system with inner splines and outer hub components; UPC 652480200656 identifies this Turning Point Propellers kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Hub Kit 508 a genuine Turning Point Propellers part?\u003c\/strong\u003e Yes, part number 11500800 is a genuine Turning Point Propellers hub kit, sold as the Hub Kit 508.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Hub Kit 508 be used with different propeller models?\u003c\/strong\u003e Yes, the outer hub on Hub Kit 508 is designed to be compatible with different propellers, so the same installed hub kit can accept a replacement prop.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031619772635,"sku":"TUR-508","price":52.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41-Tb2wMefL.jpg?v=1785216032"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/Michigan-Wheel-Hub-Kit__40521.1722348949.500.750.jpg?v=1785356958","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-propellers-drive-lower-unit-propellers-propeller-hubs-hub-kits.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}