{"title":"Keel Guards\/Protectors","description":null,"products":[{"product_id":"megaware-keelguard-pontoonguard-40-ft-kit-2-x-20-ft-black-fits-pontoons-up-to-25-feet","title":"Megaware KeelGuard PontoonGuard 40 ft Kit (2 x 20 ft), Black, Fits Pontoons up to 25 Feet","description":"\u003cp\u003eThe Megaware KeelGuard PontoonGuard is a 40 foot protective guard kit, made up of two 20 foot lengths, designed to shield the exposed log sides of a pontoon boat from dents, scrapes, and abrasion during docking and beaching. Built from a 1\/4 inch thick, ultra-tough polymer composite, the guard is UV-stabilized to resist sun damage and hold up to repeated impact against docks, seawalls, and other hard surfaces. A wide, machine-contoured leading edge and contoured sides create a clean, tight seal against the pontoon log for a factory-fit appearance rather than a bolted-on look.\u003c\/p\u003e\u003cp\u003eA 3M reflective safety strip runs along the guard, improving the visibility of the vessel at night or when illuminated by headlights or searchlights while anchored, beached, or docked. The kit installs using bolt-on or screw-in hardware and is intended for pontoon boats up to 25 feet in length; a shorter 32 foot kit (two 16 foot lengths) is available as a separate product for pontoons up to 21 feet. The PontoonGuard is offered in black, and the manufacturer backs it with a 3-year limited warranty for as long as the original owner has the vessel. This kit is identified by manufacturer part number 30240.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megaware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 30240\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polymer composite (plastic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Thickness:\u003c\/strong\u003e 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Length:\u003c\/strong\u003e 40 feet total (two 20 foot lengths)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pontoon Length:\u003c\/strong\u003e Up to 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Bolt-on, screw-in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisibility Feature:\u003c\/strong\u003e 3M reflective safety strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3-year limited warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 672057302408\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e 757187\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePontoon boats up to 25 feet in length\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e757187\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size pontoon does the Megaware KeelGuard PontoonGuard 30240 fit?\u003c\/strong\u003e This 40 foot kit, made up of two 20 foot lengths, is sized for pontoon boats up to 25 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a shorter version of this pontoon guard kit?\u003c\/strong\u003e Yes, a 32 foot kit with two 16 foot lengths is available as a separate product for pontoons up to 21 feet; the 30240 kit covers pontoons up to 25 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the PontoonGuard made from?\u003c\/strong\u003e It is made from a 1\/4 inch thick, UV-stabilized polymer composite designed to resist dents, scrapes, and sun damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick is the guard material?\u003c\/strong\u003e The PontoonGuard measures 0.25 inches thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the PontoonGuard attach to a pontoon log?\u003c\/strong\u003e It installs using bolt-on or screw-in hardware and features a machine-contoured leading edge with contoured sides for a tight, clean seal against the log.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the PontoonGuard help with nighttime visibility?\u003c\/strong\u003e Yes, the kit includes a 3M reflective safety strip that increases visibility when the boat is docked, beached, or anchored at night and illuminated by lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat colors is this kit available in?\u003c\/strong\u003e The 30240 kit is black; the PontoonGuard line is also offered in gray as a separate part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with part number 30240?\u003c\/strong\u003e The kit includes two 20 foot lengths of PontoonGuard material, totaling 40 feet, in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 40 foot PontoonGuard kit weigh?\u003c\/strong\u003e The 30240 kit weighs 16.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on the Megaware PontoonGuard?\u003c\/strong\u003e Yes, the PontoonGuard 30240 carries a 3-year limited warranty for as long as the original buyer owns the vessel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent part number for the 30240 kit?\u003c\/strong\u003e Yes, the 30240 PontoonGuard cross-references to OEM equivalent part number 757187.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat areas of the pontoon does this guard protect?\u003c\/strong\u003e It protects the exposed log sides of the pontoon from dents and scrapes that occur during docking and beaching.\u003c\/p\u003e","brand":"Keel Guard","offers":[{"title":"Default Title","offer_id":49027496509659,"sku":"MKI-30240","price":483.57,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71qj3zOOzxL.jpg?v=1785331005"},{"product_id":"keelshield-gator-guard-keel-guard-black-self-adhesive-hull-protector-available-in-6-15-16-ft-boats-and-7-17-18-ft-boats","title":"KeelShield Gator Guard Keel Guard, Black - Self-Adhesive Hull Protector, Available in 6' (15-16 Ft Boats) and 7' (17-18 Ft Boats)","description":"\u003cp\u003eProtect your hull's most vulnerable spot with the KeelShield Gator Guard keel guard, a self-adhesive polyurethane strip that armors the keel against beach landings, boat ramps, sandbars, and trailer bunks. Made in the USA and backed by a limited lifetime warranty, this keel guard installs in about an hour using an exclusive 3M adhesive system, with no mixing, curing, or drilling required. It bonds to fiberglass and most aluminum boats and is engineered to flex with the hull while standing up to years of abrasion, scratches, and gouges.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: KeelShield\u003c\/li\u003e\n\u003cli\u003eMaterial: Polyurethane\u003c\/li\u003e\n\u003cli\u003eWidth: 5 inches\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eInstallation: Self-adhesive (3M adhesive system)\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eWarranty: Limited lifetime warranty\u003c\/li\u003e\n\u003cli\u003eHull Compatibility: Fiberglass and most aluminum boats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThe KeelShield Gator Guard is sized to match your boat's overall length. Choose the 6 foot length for boats measuring 15 to 16 feet, or the 7 foot length for boats measuring 17 to 18 feet. Measure your boat's total length and select the option that corresponds to your range; the strip runs along the keel from the waterline forward, so getting the length right ensures full coverage without excess trimming.\u003c\/p\u003e","brand":"Keel Shield Gator Guard","offers":[{"title":"6' (for 15-16 ft boats)","offer_id":49046135341275,"sku":"K-S-6BK","price":173.04,"currency_code":"USD","in_stock":true},{"title":"7' (for 17-18 ft boats)","offer_id":49046135374043,"sku":"K-S-7BK","price":201.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Gator-Guard-Keelshield-Guard_03_4d2e8450-4c1e-456e-b604-d1c73a1a1029.jpg?v=1785394777"},{"product_id":"gator-guards-keelshield-keel-guard-self-adhesive-polyurethane-keel-protector-available-in-7-to-9-for-17-to-24-foot-boats","title":"Gator Guards KeelShield Keel Guard - Self-Adhesive Polyurethane Keel Protector, Available in 7' to 9' for 17 to 24 Foot Boats","description":"\u003cp\u003eThe Gator Guards KeelShield Keel Guard is a self-adhesive polyurethane strip that bonds directly to your boat's keel and hull bottom, shielding it from the scrapes, scuffs, and gouges caused by beaching, trailering, and rocky launches. Built from rugged Urethane Polymers with a 3M adhesive backing, KeelShield goes on in a simple Prep-Peel-Stick process and stays put through years of hard use, saving you from costly gelcoat repairs. The line is sized to match your boat, with lengths and fitment ranges for 17 to 24 foot fiberglass and most aluminum boats, in Black or White to blend with your hull.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Gator Guards\u003c\/li\u003e\n\u003cli\u003eMaterial: Polyurethane (PU)\u003c\/li\u003e\n\u003cli\u003eWidth: 5 inches\u003c\/li\u003e\n\u003cli\u003eFit Type: Universal Fit for fiberglass and most aluminum boats\u003c\/li\u003e\n\u003cli\u003eInstallation: Self-adhesive, 3M adhesive system (Prep-Peel-Stick)\u003c\/li\u003e\n\u003cli\u003eLengths: 7 feet, 8 feet, 9 feet\u003c\/li\u003e\n\u003cli\u003eBoat Length Fitment: 17 to 24 feet\u003c\/li\u003e\n\u003cli\u003eColors: Black, White\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eChoose your KeelShield by matching the boat length fitment to your own boat: the 7 foot White strip fits 17-18 foot boats, the 8 foot White strip fits 19-21 foot boats, and the 9 foot Black strip fits 22-24 foot boats. Pick Black or White based on your hull color for the cleanest look. If your boat falls between two fitment ranges or you are unsure, measure your keel length before ordering, since KeelShield is not returnable once installed.\u003c\/p\u003e","brand":"Keel Shield Gator Guard","offers":[{"title":"9' - Fits 22-24 ft Boats \/ Black","offer_id":49047378428123,"sku":"K-S-9BK","price":259.56,"currency_code":"USD","in_stock":true},{"title":"7' - Fits 17-18 ft Boats \/ White","offer_id":49047378460891,"sku":"K-S-7WH","price":201.88,"currency_code":"USD","in_stock":true},{"title":"8' - Fits 19-21 ft Boats \/ White","offer_id":49047378493659,"sku":"K-S-8WH","price":230.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Gator-Guard-Keelshield-Guard_03_16ba4bc7-4024-4f69-b4cc-27d7843f0b02.jpg?v=1785421397"},{"product_id":"megaware-keelguard-keel-protector-available-in-5-white-to-7-black","title":"Megaware KeelGuard Keel Protector - Available in 5' White to 7' Black","description":"\u003cp\u003eThe Megaware KeelGuard is the original keel protection system trusted by boaters to shield the vulnerable leading edge of the keel from rock strikes, sand grounding, dock scrapes, and trailer wear. Made from a pliable, shock-absorbing plastic, it flexes on impact to absorb energy instead of transferring it to the hull, then springs back into shape. The self-sealing contoured edge bonds tightly to the keel using the included marine-grade primer, so there is no exposed lip to catch debris or peel over time. Backed by a lifetime warranty for as long as you own the boat, KeelGuard is a one-time investment that protects your gelcoat and fiberglass from the most common source of hull damage below the waterline.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Megaware KeelGuard\u003c\/li\u003e\n\u003cli\u003eMaterial: Pliable, shock-absorbing plastic\u003c\/li\u003e\n\u003cli\u003eWidth: 5 inches\u003c\/li\u003e\n\u003cli\u003eCompatibility: Fiberglass boats and some aluminum boats\u003c\/li\u003e\n\u003cli\u003eWarranty: Lifetime warranty for as long as you own the boat\u003c\/li\u003e\n\u003cli\u003eIncludes: Primer and complete install kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eKeelGuard is sold by keel length and color. Measure the straight run of your keel from the point where the hull begins to curve up at the bow back to the transom, then choose the closest length below rather than rounding up significantly, since excess material is simply trimmed to fit. Available in a 5-foot length in White and a 7-foot length in Black, so pick the length that best matches your keel run and the color that best matches your hull for a factory-finished look.\u003c\/p\u003e","brand":"Keel Guard","offers":[{"title":"5' \/ White","offer_id":49047402676443,"sku":"MKI-102W5","price":160.95,"currency_code":"USD","in_stock":true},{"title":"7' \/ Black","offer_id":49047402709211,"sku":"MKI-102B7","price":204.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71dXk52L1RL_ba9fd9a7-e640-4349-9075-983df2a00297.jpg?v=1785423280"},{"product_id":"megaware-keelguard-boat-keel-protector-universal-fit-keel-guard-available-in-6-to-7-lengths","title":"Megaware KeelGuard Boat Keel Protector - Universal Fit Keel Guard, Available in 6' to 7' Lengths","description":"\u003cp\u003eThe Megaware KeelGuard is a self-adhesive, universal-fit keel protector that shields your boat's keel from the scrapes, chips, and gouges caused by beaching, trailer loading, and rocky or shell-strewn bottoms. Molded from tough, pliable polyurethane, the guard conforms tightly to the shape of the keel and absorbs impact rather than transferring it to the hull's gelcoat, helping prevent costly fiberglass repairs. Each kit installs directly over fiberglass (and most aluminum) hulls using a premium 3M adhesive backing, with primer included so the surface bonds securely without additional purchases. Backed by a lifetime warranty during normal use, the KeelGuard is a one-time install that keeps protecting season after season.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Megaware KeelGuard\u003c\/li\u003e\n\u003cli\u003eMaterial: Polyurethane\u003c\/li\u003e\n\u003cli\u003eWidth: 5 inches\u003c\/li\u003e\n\u003cli\u003eFit Type: Universal Fit\u003c\/li\u003e\n\u003cli\u003eCompatible Hull Types: Fiberglass, some aluminum boats\u003c\/li\u003e\n\u003cli\u003eInstallation Type: Self-Adhesive (3M backing)\u003c\/li\u003e\n\u003cli\u003eIncluded Components: Keel guard shield and install kit with primer\u003c\/li\u003e\n\u003cli\u003eWarranty: Lifetime warranty during normal use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eKeelGuard is sold by length and color to match your keel and hull. Measure the exposed length of your keel from the waterline forward to where it tapers into the hull, and choose the closest length at or slightly longer than that measurement; excess length can be trimmed during installation. This line is available in 6 feet (Gray) and 7 feet (White) options, so pick the length that covers your keel run and the color that best matches or complements your hull.\u003c\/p\u003e","brand":"Keel Guard","offers":[{"title":"6' \/ Gray","offer_id":49047403364571,"sku":"MKI-20506","price":180.95,"currency_code":"USD","in_stock":true},{"title":"7' \/ White","offer_id":49047403397339,"sku":"MKI-102W7","price":204.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71CsqQNT48L_aef76e33-5c8b-4e8b-8b22-3647a76ddd8e.jpg?v=1785423324"},{"product_id":"megaware-keelguard-pontoonguard-kit-gray-bolt-on-pontoon-log-protection-available-in-32-ft-and-40-ft","title":"Megaware KeelGuard PontoonGuard Kit - Gray Bolt-On Pontoon Log Protection, Available in 32 ft and 40 ft","description":"\u003cp\u003eThe Megaware KeelGuard PontoonGuard kit shields the leading edge and sides of your pontoon logs from the dents, scrapes, and gouges that come from dock contact, beach landings, and submerged obstacles. Molded from a UV-stabilized polymer composite, it bolts on and forms a tight, contoured seal along the pontoon tube so impacts hit the guard instead of your aluminum. A built-in 3M reflective strip also makes your pontoon more visible to other boaters after dark. Backed by a 3 year limited warranty, this kit is sized to match your pontoon's length, from 32 foot kits for pontoons up to 21 feet to 40 foot kits for pontoons up to 25 feet.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Megaware KeelGuard\u003c\/li\u003e\n\u003cli\u003eColor: Gray\u003c\/li\u003e\n\u003cli\u003eMaterial: UV-stabilized polymer composite\u003c\/li\u003e\n\u003cli\u003eThickness: 0.25 inches\u003c\/li\u003e\n\u003cli\u003eFit Type: Universal fit\u003c\/li\u003e\n\u003cli\u003eInstallation Type: Bolt-on\u003c\/li\u003e\n\u003cli\u003eVisibility Feature: 3M reflective strip\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eChoose your kit based on your pontoon's overall length. The 32 foot kit fits pontoons up to 21 feet long, while the 40 foot kit fits pontoons up to 25 feet long; each kit ships as two equal-length guard sections that run along both pontoon logs. Measure your pontoon's length before ordering, since an undersized guard will not fully protect the leading edge.\u003c\/p\u003e","brand":"Keel Guard","offers":[{"title":"40 ft (fits pontoons up to 25 ft)","offer_id":49047403561179,"sku":"MKI-30540","price":491.22,"currency_code":"USD","in_stock":false},{"title":"32 ft (fits pontoons up to 21 ft)","offer_id":49047403593947,"sku":"MKI-30532","price":402.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71zvWL-HyiL_877b3bf4-48ab-46ab-a57a-9db96c7d34a1.jpg?v=1785423367"},{"product_id":"gator-guards-keelshield-keel-guard-light-gray-available-in-6-15-16-ft-boats-to-7-17-18-ft-boats","title":"Gator Guards KeelShield Keel Guard, Light Gray - Available in 6' (15-16 Ft Boats) to 7' (17-18 Ft Boats)","description":"\u003cp\u003eProtect your hull's most vulnerable point from the daily abuse of ramps, rocks, docks, and sand bars. The Gator Guards KeelShield Keel Guard is a self-adhesive polyurethane strip that bonds directly to your keel, absorbing impacts and abrasion that would otherwise chip gelcoat or gouge aluminum. Built with an exclusive 3M adhesive system, it installs in about an hour with no mixing, curing, or fasteners required, and it carries a limited lifetime warranty against defects in materials or workmanship.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Gator Guards\u003c\/li\u003e\n\u003cli\u003eProduct Line: KeelShield\u003c\/li\u003e\n\u003cli\u003eColor: Light Gray\u003c\/li\u003e\n\u003cli\u003eWidth: 5 inches\u003c\/li\u003e\n\u003cli\u003eMaterial: Polyurethane (Urethane Polymer)\u003c\/li\u003e\n\u003cli\u003eAdhesive Type: 3M self-adhesive system\u003c\/li\u003e\n\u003cli\u003eInstallation Type: Self-adhesive, DIY, no mixing or curing required\u003c\/li\u003e\n\u003cli\u003eFit Type: Fiberglass and most aluminum boats\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA\u003c\/li\u003e\n\u003cli\u003eWarranty: Limited lifetime warranty against defects in materials or workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThe KeelShield Keel Guard is sold in two lengths matched to common boat sizes. Choose the 6 foot option for boats measuring 15 to 16 feet, or the 7 foot option for boats measuring 17 to 18 feet. Measure your keel length along the hull's centerline before ordering, and note that certain Alumacraft, Lund, G3 Angler Series, and Crestliner models are not compatible with this product.\u003c\/p\u003e","brand":"Keel Shield Gator Guard","offers":[{"title":"6' (for 15-16' Boats)","offer_id":49047449436379,"sku":"K-S-6LG","price":173.04,"currency_code":"USD","in_stock":true},{"title":"7' (for 17-18' Boats)","offer_id":49047449469147,"sku":"K-S-7LG","price":201.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Gator-Guard-Keelshield-Guard_03_f4d28f81-797f-462b-8207-9ea248808980.jpg?v=1785425286"},{"product_id":"gator-guards-keelshield-keel-guard-white-available-in-6-to-9-lengths","title":"Gator Guards KeelShield Keel Guard - White, Available in 6' to 9' Lengths","description":"\u003cp\u003eThe Gator Guards KeelShield Keel Guard is a self-adhesive keel protection strip built to absorb the abrasion, scraping, and impact that ramps, rocks, sand, and shell beds throw at the bottom of your keel. Made from pure polyurethane (urethane polymer), it forms a tough, flexible skin over the leading edge of the hull, the area that takes the most abuse on every launch and retrieval. The Prep-Peel-Stick installation uses an exclusive 3M adhesive system, so there is no mixing, no curing time, and no fiberglass work required, most boats are done in about an hour. It fits fiberglass and most aluminum hulls universally, keeping your keel looking good and your gelcoat or aluminum intact season after season.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Gator Guards\u003c\/li\u003e\n\u003cli\u003eMaterial: Polyurethane (PU) \/ Urethane Polymers\u003c\/li\u003e\n\u003cli\u003eWidth: 5 inches\u003c\/li\u003e\n\u003cli\u003eInstallation: Self-adhesive (3M adhesive system), Prep-Peel-Stick\u003c\/li\u003e\n\u003cli\u003eFit: Universal fit for fiberglass and most aluminum boats\u003c\/li\u003e\n\u003cli\u003eColor: White\u003c\/li\u003e\n\u003cli\u003eUnit Count: 1 per package\u003c\/li\u003e\n\u003cli\u003eIncluded: KeelShield strip, instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eKeelShield is sized to match your boat's overall length, not just the keel measurement. Choose the 6 foot length for boats in the 15 to 16 foot range, or the 9 foot length for boats in the 22 to 24 foot range. If your boat falls between listed ranges or has an unusually long or short keel run, measure the straight-line keel section that contacts ramps and beaches and choose the closest length at or above that measurement. Both lengths ship in the same 5 inch width and White color, and use the identical 3M-backed adhesive installation.\u003c\/p\u003e","brand":"Keel Shield Gator Guard","offers":[{"title":"6' Length (15-16 ft Boats)","offer_id":49047450091739,"sku":"K-S-6WH","price":173.04,"currency_code":"USD","in_stock":true},{"title":"9' Length (22-24 ft Boats)","offer_id":49047450124507,"sku":"K-S-9WH","price":261.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Gator-Guard-Keelshield-Guard_03_c991335f-2077-4258-938f-518eb36a0ba1.jpg?v=1785425331"},{"product_id":"megaware-keelguard-self-adhesive-boat-keel-protector-available-in-6-7-and-8-lengths-multiple-colors","title":"Megaware KeelGuard Self-Adhesive Boat Keel Protector - Available in 6', 7', and 8' Lengths, Multiple Colors","description":"\u003cp\u003eThe Megaware KeelGuard is a self-adhesive polyurethane strip that protects your boat's keel and hull from impact damage caused by sandbars, rocks, boat ramps, and trailer bunks. It bonds directly to the keel with a flexible, shock-absorbing material that flexes on impact instead of chipping or cracking gelcoat, and it comes with everything needed for a straightforward DIY installation. The KeelGuard is backed by a lifetime warranty against abrasive wear and adhesion failure for as long as you own the boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Megaware KeelGuard\u003c\/li\u003e\n\u003cli\u003eMaterial: Polyurethane\u003c\/li\u003e\n\u003cli\u003eWidth: 5 inches\u003c\/li\u003e\n\u003cli\u003eInstallation Type: Self-Adhesive (DIY kit)\u003c\/li\u003e\n\u003cli\u003eFit Type: Universal fit for fiberglass and some aluminum boats\u003c\/li\u003e\n\u003cli\u003eIncluded Components: KeelGuard strip, burnishing tool, Scotch-Brite pad, Primer 94 wipe, latex glove, instructions, registration card\u003c\/li\u003e\n\u003cli\u003eWarranty: Lifetime warranty for the original purchaser against abrasive wear and adhesion failure, for as long as you own the boat (registration required)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThe KeelGuard is available in 6, 7, and 8 foot lengths to match your boat's keel run, and in a range of colors to blend with your hull. As a guide, the 6 foot length suits most boats up to around 19 feet, the 7 foot length suits boats in the low-20 foot range, and the 8 foot length is intended for boats up to about 22 feet. Measure your keel from the base of the bow to the point where the hull begins to curve upward at the stern, then choose the closest length and your preferred color from the options below.\u003c\/p\u003e","brand":"Keel Guard","offers":[{"title":"6' \/ Red","offer_id":49048990712027,"sku":"MKI-102R6","price":180.95,"currency_code":"USD","in_stock":false},{"title":"6' \/ Blue","offer_id":49048990744795,"sku":"MKI-102BL6","price":180.95,"currency_code":"USD","in_stock":true},{"title":"6' \/ Almond","offer_id":49048990777563,"sku":"MKI-102A6","price":180.95,"currency_code":"USD","in_stock":true},{"title":"6' \/ White","offer_id":49048990810331,"sku":"MKI-102W6","price":180.95,"currency_code":"USD","in_stock":true},{"title":"6' \/ Black","offer_id":49048990843099,"sku":"MKI-102B6","price":180.95,"currency_code":"USD","in_stock":false},{"title":"6' \/ Light Gray","offer_id":49048990875867,"sku":"MKI-102LG6","price":180.95,"currency_code":"USD","in_stock":true},{"title":"7' \/ Gray","offer_id":49048990908635,"sku":"MKI-20507","price":204.95,"currency_code":"USD","in_stock":true},{"title":"8' \/ White","offer_id":49048990941403,"sku":"MKI-102W8","price":225.95,"currency_code":"USD","in_stock":false},{"title":"8' \/ Gray","offer_id":49048990974171,"sku":"MKI-20508","price":225.95,"currency_code":"USD","in_stock":true},{"title":"8' \/ Black","offer_id":49048991006939,"sku":"MKI-102B8","price":225.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81RYzBJKMhL_14e23f13-bcdf-4f10-bfb2-482285c28acf.jpg?v=1785446501"},{"product_id":"megaware-scuffbuster-stainless-steel-bow-guard-standard-to-xl-5-75-to-9","title":"Megaware ScuffBuster Stainless Steel Bow Guard - Standard to XL, 5.75\" to 9\"","description":"\u003cp\u003eThe Megaware ScuffBuster is a self-adhesive stainless steel bow guard that shields your boat's gelcoat from the scuffs, scrapes, and abrasion caused by trailer rollers, bunks, and docks during every launch and retrieval. Formed from 22-gauge 304 stainless steel with a mirror-polished finish, the ScuffBuster bends to conform to the curve of your hull and bonds permanently with a 3M pressure-sensitive adhesive backing, so there is no drilling, no hardware, and no gelcoat penetration required. Choose the Standard size for smaller bows and lighter-duty trailering, or step up to the XL size for larger hulls and boats that see heavier or more frequent trailer contact.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Megaware\u003c\/li\u003e\n\u003cli\u003eMaterial: 304 stainless steel, 22-gauge\u003c\/li\u003e\n\u003cli\u003eFinish: Mirror polished\u003c\/li\u003e\n\u003cli\u003eColor: Stainless\u003c\/li\u003e\n\u003cli\u003eAdhesive: 3M pressure-sensitive adhesive, self-adhesive installation\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year limited manufacturer's warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThe ScuffBuster line is offered in two sizes: the Standard 5.75\" x 4.5\" guard (part 2637), sized for smaller bows and moderate trailer wear, and the XL 9\" x 8.75\" guard, built for larger boats or bows that take more frequent contact with trailer rollers and bunks. Measure the area of your bow that contacts the trailer during loading to determine which size gives full coverage, and select the matching option before ordering.\u003c\/p\u003e","brand":"Keel Guard","offers":[{"title":"Standard 5.75\" x 4.5\"","offer_id":49048991826139,"sku":"MKI-02637","price":21.95,"currency_code":"USD","in_stock":true},{"title":"XL 9\" x 8.75\"","offer_id":49048991858907,"sku":"MKI-80637","price":43.18,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/MKI-02637_lg__84617.1619615366.500.750_ab6473a5-b2e7-44f1-99d5-7a6d4a6d8f24.jpg?v=1785446557"},{"product_id":"stingray-hydrofoils-classic-2-senior-hydrofoil-stabilizer-fin-no-drill-fit-for-40-300-hp-outboard-outdrive-motors","title":"Stingray Hydrofoils Classic 2 Senior Hydrofoil Stabilizer Fin - No-Drill Fit for 40-300 HP Outboard\/Outdrive Motors","description":"\u003cp\u003eThe Stingray Hydrofoils Classic 2 Senior Hydrofoil is a no-drill stabilizer fin that clamps onto the anti-cavitation plate of an outboard or outdrive motor. Once installed, it helps the boat plane faster, reduces bow rise, cuts steering torque and porpoising, and improves stability at low speed and on turns. It is built for mid-to-large motors rated from 40 to 300 horsepower and mounts using a 4-bolt slide-on fit with no drilling into the lower unit required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Stingray Hydrofoils\u003c\/li\u003e\n\u003cli\u003eWeight: 3.25 pounds\u003c\/li\u003e\n\u003cli\u003eItem Dimensions (D x W x H): 23.5 in x 18.13 in x 1.75 in\u003c\/li\u003e\n\u003cli\u003eMaximum Horsepower: 300 horsepower\u003c\/li\u003e\n\u003cli\u003eEngine Type: 4 Stroke\u003c\/li\u003e\n\u003cli\u003eMounting Type: Engine Mount, 4-bolt no-drill slide-on fit\u003c\/li\u003e\n\u003cli\u003eFuel Type: Gasoline\u003c\/li\u003e\n\u003cli\u003eRecommended Use: Fresh Water\u003c\/li\u003e\n\u003cli\u003eUnit Count: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis hydrofoil is offered in two color\/part options: SR2-1 in Black and SR2-3 in Gray. Both share the same fit range (40-300 HP outboard\/outdrive motors) and the same 4-bolt no-drill installation, so choose based on the finish that matches your motor cowling or personal preference.\u003c\/p\u003e","brand":"Stingray Hydrofoils","offers":[{"title":"Black","offer_id":49049204621531,"sku":"M-D-SR2-1","price":102.03,"currency_code":"USD","in_stock":false},{"title":"Gray","offer_id":49049204654299,"sku":"M-D-SR2-3","price":102.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61bXVGPN3LL_0e3ddef1-6443-42cf-9af9-de3ce0d40c50.jpg?v=1785454562"},{"product_id":"gator-guards-keelshield-keel-guard-boat-keel-protector-available-in-5-to-8-lengths-multiple-colors","title":"Gator Guards KeelShield Keel Guard - Boat Keel Protector, Available in 5' to 8' Lengths, Multiple Colors","description":"\u003cp\u003eThe KeelShield Keel Guard from Gator Guards is a peel-and-stick keel protector engineered to shield your hull's leading edge from the abrasion, gouges, and scarring caused by beaching, launching, and trailering. Molded from durable polyurethane (PU) and bonded with an exclusive 3M adhesive system, KeelShield installs in about an hour with no mixing, curing, or drilling required, and stands up to years of sun, sand, rocks, and boat ramps without cracking or peeling. It is compatible with fiberglass and most aluminum hulls, giving boat owners an affordable way to protect resale value and avoid costly gelcoat repairs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Gator Guards \/ KeelShield\u003c\/li\u003e\n\u003cli\u003eMaterial: Polyurethane (PU)\u003c\/li\u003e\n\u003cli\u003eWidth: 5 inches\u003c\/li\u003e\n\u003cli\u003eInstallation: Self-adhesive (3M peel-and-stick), no tools or curing time\u003c\/li\u003e\n\u003cli\u003eFit: Universal fit for fiberglass and most aluminum hulls\u003c\/li\u003e\n\u003cli\u003eLengths offered: 5, 6, 7, and 8 feet\u003c\/li\u003e\n\u003cli\u003eBoat size coverage: Up to 14 feet through 19-21 feet\u003c\/li\u003e\n\u003cli\u003eColors offered: White, Dark Gray, Light Gray, Black\u003c\/li\u003e\n\u003cli\u003eWarranty: Limited lifetime warranty against defects in materials or workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eChoose your KeelShield by matching the length to your boat's overall length: 5 feet for boats up to 14 feet, 6 feet for 15-16 foot boats, 7 feet for 17-18 foot boats, and 8 feet for 19-21 foot boats. Then pick a color that best matches or contrasts with your hull gelcoat - White, Dark Gray, Light Gray, and Black are available depending on length. If your boat falls between two length categories, size up to ensure full keel coverage from the waterline forward to the bow.\u003c\/p\u003e","brand":"Keel Shield Gator Guard","offers":[{"title":"5' (fits up to 14') \/ White","offer_id":49049206587611,"sku":"K-S-5WPWC","price":144.2,"currency_code":"USD","in_stock":false},{"title":"6' (fits 15-16') \/ Dark Gray","offer_id":49049206620379,"sku":"K-S-6G","price":173.04,"currency_code":"USD","in_stock":true},{"title":"7' (fits 17-18') \/ Dark Gray","offer_id":49049206653147,"sku":"K-S-7G","price":201.88,"currency_code":"USD","in_stock":true},{"title":"8' (fits 19-21') \/ Dark Gray","offer_id":49049206685915,"sku":"K-S-8G","price":230.72,"currency_code":"USD","in_stock":true},{"title":"8' (fits 19-21') \/ Light Gray","offer_id":49049206718683,"sku":"K-S-8LG","price":230.72,"currency_code":"USD","in_stock":true},{"title":"8' (fits 19-21') \/ Black","offer_id":49049206751451,"sku":"K-S-8BK","price":230.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/img_073ddc5e-501a-4b2d-beac-bb908f1e70db.jpg?v=1785454884"},{"product_id":"gator-guards-bowshield-stainless-steel-boat-bow-guard-available-in-small-6-5-x-6-and-medium-7-5-x-9","title":"Gator Guards BowShield Stainless Steel Boat Bow Guard - Available in Small (6.5\" x 6\") and Medium (7.5\" x 9\")","description":"\u003cp\u003eThe Gator Guards BowShield is a self-adhesive, marine-grade stainless steel bow guard designed to protect the leading edge of your boat's bow from the scuffs, gouges, and abrasion caused by trailer rollers and bunks. Made from 316 marine grade stainless steel with a polished, mirror finish, the BowShield bonds directly over the bow's contact point using a 24-hour cure urethane adhesive for a permanent, hardware-free installation that will not lift or peel like simple stick-on films. Whether you trailer a personal watercraft or a larger runabout, the BowShield line gives you a durable metal barrier that keeps your gelcoat and hull finish looking new launch after launch.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Gator Guards\u003c\/li\u003e\n\u003cli\u003eMaterial: 316 Marine Grade Stainless Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Polished, Mirror Finish\u003c\/li\u003e\n\u003cli\u003eColor: Stainless\u003c\/li\u003e\n\u003cli\u003eFit Type: Universal Fit\u003c\/li\u003e\n\u003cli\u003eVehicle Service Type: Personal Watercraft, Trailer\u003c\/li\u003e\n\u003cli\u003eInstallation Type: Self-Adhesive (24-Hour Cure Urethane Adhesive)\u003c\/li\u003e\n\u003cli\u003eIncluded Components: BowShield, Adhesive, Instruction Sheet\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 Year Manufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThe BowShield is available in two sizes to match your bow roller setup. The Small (6.5 x 6 inches) suits smaller bows and personal watercraft, while the Medium (7.5 x 9 inches) is built for bow rollers up to 8 inches and offers broader coverage for larger hulls. Measure the width of your bow roller and the contact area on your bow before ordering to ensure full coverage of the wear zone.\u003c\/p\u003e","brand":"Keel Shield Gator Guard","offers":[{"title":"Small - 6.5\" x 6\"","offer_id":49049206948059,"sku":"K-S-BS-SM","price":43.08,"currency_code":"USD","in_stock":true},{"title":"Medium - 7.5\" x 9\"","offer_id":49049206980827,"sku":"K-S-BS-MED","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Gator-Guard-Bowshield_08_f132a426-1aa4-4eba-af2d-f95588aded46.jpg?v=1785454932"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/Gator-Guard-Keelshield-Guard_03_d28ffa51-1c9b-47bd-8e43-3e2562f00694.jpg?v=1785356528","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-propellers-drive-lower-unit-skeg-keel-hull-guards-keel-guards-protectors.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}