{"title":"Freshwater \u0026 Utility Pumps","description":null,"products":[{"product_id":"attwood-4140-4-waterbuster-portable-cordless-submersible-pump-200-gph-battery-powered-water-removal-for-boats-pool-covers-kayaks-inflatables","title":"Attwood WaterBuster 4140-4 Portable Submersible Utility Pump, 200 GPH Battery-Operated Cordless","description":"\u003cp\u003eThe Attwood WaterBuster (part number 4140-4) is a cordless, battery-operated portable pump built to remove unwanted water quickly and safely, without the hazard of an electrical cord in a wet environment. Powered by three D-size alkaline batteries, it runs for up to 5 hours per set and moves up to 200 gallons of water per hour on open flow, or 125 gallons per hour against a 2-foot head. It can lift water to a height of 40 inches. The pump ships with a 42-inch drainage hose fitted with a garden hose adapter, so a longer hose can be attached when extra reach is needed.\u003c\/p\u003e\u003cp\u003eIts compact 5.25-inch diameter and 6.5-inch height let it fit into tight spaces such as bilges, kayaks, and small hatches, while its fully submersible plastic housing stands up to repeated wet use. Typical applications include draining kayaks, inflatables, duck boats, dinghies, and paddle boats that lack a hard-wired electrical system, as well as clearing water from pool covers, aquariums, and sump pits. The WaterBuster is intended for portable, on-demand water removal only and is not designed to be installed as a permanent bilge pump.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4140-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Portable Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Battery powered (3 D-size alkaline batteries, not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 4.5 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Life:\u003c\/strong\u003e Up to 5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate (Open Flow):\u003c\/strong\u003e 200 gallons per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate at 2 ft. Head:\u003c\/strong\u003e 125 gallons per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Lift Height:\u003c\/strong\u003e 40 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 42 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Adapter:\u003c\/strong\u003e Garden hose adapter included for attaching a longer hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5.25 inches L x 5.25 inches W x 6.5 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Warranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal portable use; not vessel-specific. Suited to kayaks, inflatables, duck boats, dinghies, paddle boats, and other craft without a permanent electrical system, as well as pool covers, aquariums, and sump pits.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per hour does the Attwood 4140-4 pump move?\u003c\/strong\u003e The Attwood WaterBuster 4140-4 moves up to 200 gallons per hour on open flow, or 125 gallons per hour when working against a 2-foot head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat batteries does the WaterBuster 4140-4 use, and how long do they last?\u003c\/strong\u003e It runs on three D-size alkaline batteries (not included), which power the pump for up to 5 hours of continuous use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow high can this pump lift water?\u003c\/strong\u003e The 4140-4 can lift water to a height of 40 inches from its intake point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 4140-4 come with a hose?\u003c\/strong\u003e Yes, it includes a 42-inch drainage hose with a garden hose adapter, so a longer hose can be connected if more reach is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the WaterBuster 4140-4 be used as a permanent bilge pump?\u003c\/strong\u003e No. The 4140-4 is designed as a portable, on-demand pump and is not intended for permanent bilge pump installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Attwood 4140-4 pump?\u003c\/strong\u003e It measures 5.25 inches in diameter and 6.5 inches in height, and weighs 2.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood WaterBuster fully submersible?\u003c\/strong\u003e Yes, the 4140-4 is a submersible pump built to operate underwater in the space it is removing water from.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the WaterBuster 4140-4 typically used for?\u003c\/strong\u003e It is used to remove water from kayaks, inflatables, duck boats, dinghies, and paddle boats without a permanent electrical system, as well as from pool covers, aquariums, and sump pits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 4140-4 need to be plugged in or wired to a boat's electrical system?\u003c\/strong\u003e No. The 4140-4 is cordless and battery-powered, so it needs no electrical cord or onboard power source to run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 4140-4 housing made of?\u003c\/strong\u003e The pump housing is plastic, finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the WaterBuster 4140-4 run on?\u003c\/strong\u003e The 4140-4 operates on 4.5 volts DC, supplied by its three D-size alkaline batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on the Attwood 4140-4?\u003c\/strong\u003e The Attwood WaterBuster 4140-4 carries a 90-day manufacturer warranty.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989669458139,"sku":"ATT-4140-4","price":58.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-4140-4_lg__76962.1558139273.500.750.jpg?v=1785188279"},{"product_id":"jabsco-drill-pump-impeller-17255-0003-p-profile-d-nitrile-6-blade-1-4-inch-shaft","title":"Jabsco Drill Pump Impeller 17255-0003-P, Profile D Nitrile, 6-Blade, 1\/4 Inch Shaft","description":"\u003cp\u003eThe Jabsco 17255-0003-P is a profile D replacement impeller built with a molded-on shaft for use in Jabsco electric drill pumps. It is the correct wear part to keep an electric drill pump priming and moving fluid at full capacity once the original impeller has worn down or lost flexibility. The impeller features 6 blades and is molded from nitrile, a rubber compound chosen for its durability and resistance to wear from repeated priming and pumping cycles. Because the shaft is molded directly into the impeller body, installation is straightforward and does not require a separate shaft assembly.\u003c\/p\u003e\u003cp\u003eThis impeller is sized for compact drill-pump applications: it measures 3\/4 inch (19mm) in width with an overall diameter of 1-9\/16 inch and a 1\/4 inch shaft diameter. It is expertly crafted from premium materials to match rigorous quality standards, making it a dependable choice for boat owners, homeowners, and anyone who relies on an electric drill pump for utility pumping, fluid transfer, or scavenging jobs around boats, homes, plants, shops, or farms.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 17255-0003-P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller Profile:\u003c\/strong\u003e D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Count:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nitrile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft:\u003c\/strong\u003e Molded on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 3\/4 inch (19mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Diameter:\u003c\/strong\u003e 1-9\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Diameter:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 671880588140\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eJabsco electric drill pump\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Jabsco 17255-0003-P impeller used in?\u003c\/strong\u003e The Jabsco 17255-0003-P is a replacement impeller designed for use in Jabsco electric drill pumps, the type of pump that attaches to a standard electric drill for utility fluid transfer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many blades does this impeller have?\u003c\/strong\u003e The 17255-0003-P impeller has 6 blades, molded from nitrile for durability under repeated pumping cycles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 17255-0003-P impeller made from?\u003c\/strong\u003e It is constructed from nitrile, a rubber material chosen for extreme durability and long-lasting use in pump applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this impeller include a shaft?\u003c\/strong\u003e Yes, the shaft is molded directly onto the 17255-0003-P impeller body, so no separate shaft assembly is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 17255-0003-P impeller?\u003c\/strong\u003e It measures 3\/4 inch (19mm) in width, 1-9\/16 inch in overall diameter, and has a 1\/4 inch shaft diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 17255-0003-P impeller weigh?\u003c\/strong\u003e This impeller weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat impeller profile is the 17255-0003-P?\u003c\/strong\u003e The 17255-0003-P is a profile D impeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 17255-0003-P a genuine Jabsco part?\u003c\/strong\u003e Yes, the 17255-0003-P is a genuine Jabsco replacement impeller, expertly crafted from premium materials to Jabsco's quality standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace the impeller in my Jabsco electric drill pump?\u003c\/strong\u003e The impeller should be replaced when it shows signs of wear, cracking, or reduced pumping performance, since a worn nitrile impeller loses its ability to prime and move fluid efficiently.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box with the 17255-0003-P?\u003c\/strong\u003e The 17255-0003-P ships as a single replacement impeller with its molded-on shaft.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028221632731,"sku":"ITT-17255-0003-P","price":37.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ITT-17255-0003_lg__33789.1558116737.500.750.jpg?v=1785164553"},{"product_id":"jabsco-electric-drill-pump-17250-0003-self-priming-utility-pump-for-1-4-to-3-8-inch-drills","title":"Jabsco Electric Drill Pump 17250-0003, Self-Priming Utility Pump for 1\/4 to 3\/8 Inch Drills","description":"\u003cp\u003eThe Jabsco Electric Drill Pump 17250-0003 turns any electric drill into a portable fluid transfer pump, making it an easy way to move water, coolant, or other fluids almost anywhere aboard a boat, at home, in a shop, or on a farm. Powered by an electric drill with either a 1\/4 inch or 3\/8 inch chuck, this pump is self-priming to 3 feet and moves fluid at up to 3-1\/2 gallons per minute, giving it the reach and flow of a dedicated hand utility pump without the extra equipment.\u003c\/p\u003e\u003cp\u003eInside, a 1\/4 inch diameter shaft drives the pump impeller directly from the drill chuck. The kit comes complete with two 3\/4 inch garden hose thread port adapters, so it connects straight to standard garden hose fittings for draining, filling a bucket or basin, removing standing water, or scavenging fluid from tight spaces. Its compact footprint of 3-5\/16 inches long, 3-1\/2 inches wide, and 2-3\/16 inches high makes it easy to store in a tool bag or boat locker between uses.\u003c\/p\u003e\u003cp\u003eThis is a versatile, general-purpose utility pump rather than a part built for one specific application, so it fits a wide range of pumping jobs around boats, homes, plants, shops, and farms wherever an electric drill can be operated.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 17250-0003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3-5\/16 inches long x 3-1\/2 inches wide x 2-3\/16 inches high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.35 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e Up to 3-1\/2 gallons per minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Priming Height:\u003c\/strong\u003e Up to 3 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Diameter:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Chuck Compatibility:\u003c\/strong\u003e 1\/4 inch or 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Connections:\u003c\/strong\u003e 1\/2 inch ID\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Port Adapters:\u003c\/strong\u003e Two 3\/4 inch garden hose thread adapters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller Material:\u003c\/strong\u003e Nitrile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Blend\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Corded electric drill (drill powered, no onboard motor)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal utility pump for use with any electric drill having a 1\/4 inch or 3\/8 inch chuck; it is not vehicle- or engine-specific.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Jabsco 17250-0003 drill pump used for?\u003c\/strong\u003e The Jabsco 17250-0003 is an electric drill pump that transfers fluid almost anywhere an electric drill can be operated, including removing standing water, filling a bucket or basin, and general scavenging jobs on boats, homes, plants, shops, or farms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size drill chuck does the Jabsco drill pump require?\u003c\/strong\u003e It works with either a 1\/4 inch or 3\/8 inch electric drill chuck, which drives the pump's 1\/4 inch diameter shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much fluid can this pump move?\u003c\/strong\u003e The Jabsco 17250-0003 pumps up to 3-1\/2 gallons per minute and is self-priming to a height of 3 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose fittings are included with the 17250-0003?\u003c\/strong\u003e Two 3\/4 inch garden hose thread port adapters are included, and the pump has 1\/2 inch ID hose connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Jabsco drill pump?\u003c\/strong\u003e The Jabsco 17250-0003 measures 3-5\/16 inches long, 3-1\/2 inches wide, and 2-3\/16 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Jabsco 17250-0003 weigh?\u003c\/strong\u003e It weighs 0.35 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the impeller made of?\u003c\/strong\u003e The pump uses a nitrile impeller, chosen for durability in fluid transfer applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the drill pump need its own power source?\u003c\/strong\u003e No, the 17250-0003 has no built-in motor; it is powered by connecting it to a corded electric drill with a 1\/4 inch or 3\/8 inch chuck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this pump be used to change engine oil?\u003c\/strong\u003e Yes, the Jabsco 17250-0003 can be used for general fluid transfer tasks such as draining or changing oil in addition to water removal and filling jobs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Jabsco electric drill pump?\u003c\/strong\u003e The 17250-0003 is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Jabsco 17250-0003 a universal fit pump?\u003c\/strong\u003e Yes, it is a general-purpose utility pump compatible with any electric drill having a 1\/4 inch or 3\/8 inch chuck, rather than being designed for one specific engine or vehicle.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028221599963,"sku":"ITT-17250-0003","price":44.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ITT-17250-0003_lg__83006.1722373007.500.750.jpg?v=1785164553"},{"product_id":"jabsco-ballast-puppy-18220-1127-12v-wakeboard-boat-ballast-pump-with-reversing-switch","title":"Jabsco Ballast Puppy 18220-1127 12V Wakeboard Boat Ballast Pump with Reversing Switch","description":"\u003cp\u003eThe Jabsco Ballast Puppy 18220-1127 is a 12 volt pump designed to fill Wakeboard Liquid Ballast Tanks with water, and when reversed will also pump the water back out. With a flow rate of 9 gallons per minute, it can fill most ballast tanks in about five minutes, letting you get the boat weighted and on the water without a long wait. The pump is self-priming to 3 feet, so it does not need to be mounted directly at the water source, and it is built to comply with USCG 183.410 and ISO 8846 Marine ignition protection standards for safe use around gasoline engines.\u003c\/p\u003e\u003cp\u003eA run-dry protection device automatically shuts the pump off if it loses its water supply, protecting the impeller from damage if a tank runs empty or a line is blocked. Because the pump is reversible, the same unit handles both filling and emptying the ballast tank, which simplifies plumbing and wiring compared to running separate fill and drain pumps. The pump connects using a 1 inch hose barb and a 1\/2 inch NPT internal port, and it ships complete with its reversing switch so it can be wired to switch direction from the helm.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18220-1127\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Ballast Puppy Boat Ballast Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 9 gallons per minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Priming:\u003c\/strong\u003e To 3 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorts:\u003c\/strong\u003e 1 inch hose barb and 1\/2 inch NPT internal port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 7-1\/8 inches x 4-3\/4 inches x 3-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun-Dry Protection:\u003c\/strong\u003e Yes, automatic shutoff to protect impeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReversible:\u003c\/strong\u003e Yes, fills and empties ballast tanks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Reversing switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e Complies with USCG 183.410 and ISO 8846 Marine (Ignition Protected)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 671880565189\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Jabsco Ballast Puppy 18220-1127 do?\u003c\/strong\u003e It pumps water into a Wakeboard Liquid Ballast Tank to fill it, and when reversed it pumps the water back out to empty the tank, all with the same 18220-1127 pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does this pump fill a ballast tank?\u003c\/strong\u003e The 18220-1127 has a flow rate of 9 gallons per minute, which is enough to fill most ballast tanks in about five minutes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Jabsco 18220-1127 reversible?\u003c\/strong\u003e Yes, this pump is reversible, so it can both fill and empty a ballast tank using the included reversing switch rather than requiring a separate pump for each direction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this ballast pump run on?\u003c\/strong\u003e The Jabsco Ballast Puppy 18220-1127 is a 12 volt DC pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the pump need to be mounted right at the water source?\u003c\/strong\u003e No, the 18220-1127 is self-priming to 3 feet, so it can be mounted a short distance above the water source rather than fully submerged or at water level.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens if the pump runs dry?\u003c\/strong\u003e The 18220-1127 includes a run-dry protection device that automatically shuts the pump off if it loses its water supply, which protects the impeller from damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose and fitting connections does this pump use?\u003c\/strong\u003e The Ballast Puppy 18220-1127 connects using a 1 inch hose barb along with a 1\/2 inch NPT internal port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump ignition protected for use near a gasoline engine?\u003c\/strong\u003e Yes, the 18220-1127 complies with USCG regulation 183.410 and ISO 8846 Marine standards for ignition protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the pump come with a reversing switch included?\u003c\/strong\u003e Yes, the reversing switch that lets you toggle between filling and emptying the ballast tank is included with the 18220-1127.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Jabsco Ballast Puppy 18220-1127 weigh?\u003c\/strong\u003e This pump weighs 7.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pump head made of?\u003c\/strong\u003e The Ballast Puppy 18220-1127 has a bronze pump construction with a black finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this ballast pump?\u003c\/strong\u003e The 18220-1127 measures 7-1\/8 inches by 4-3\/4 inches by 3-5\/8 inches.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028221960411,"sku":"ITT-18220-1127","price":406.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18220__96853.1722513665.500.750.jpg?v=1785164559"},{"product_id":"jabsco-18590-2092-run-dry-macerator-waste-pump-12v-self-priming-to-5-feet","title":"Jabsco 18590-2092 Run Dry Macerator Waste Pump, 12V, Self-Priming to 5 Feet","description":"\u003cp\u003eThe Jabsco 18590-2092 Run Dry Macerator Waste Pump is a 12-volt marine pump built to empty holding tanks quickly and safely when you are outside a discharge-restricted area. It is self-priming to 5 feet when wet and 4 feet when dry, and it can empty a typical 30-gallon holding tank in less than 3 minutes. With a duty cycle of 15 minutes continuous, this pump can handle up to 180 gallons in a single operation, making it equally suited to emptying fish box and livewell receptacles.\u003c\/p\u003e\u003cp\u003eAt the heart of the pump is a stainless steel 4-blade cutter that grinds waste solids down to 1\/8 inch maximum particle size so material passes easily through the 1 inch discharge port. The impeller is made from Jabsco nitrile compound and the pump uses a lip-type seal. A run-dry protection device is built in to guard against accidental damage if the pump is operated without fluid. The inlet accepts a 1-1\/2 inch hose barb or 1-1\/2 inch NPT male connection, while the outlet uses a 1 inch hose barb.\u003c\/p\u003e\u003cp\u003eThis macerator pump is ignition protected, complying with USCG regulation 183.410 and ISO 8846 MARINE, making it safe for use in gasoline engine spaces aboard boats and RVs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18590-2092\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Macerator Waste Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 12 Gallons Per Minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Priming:\u003c\/strong\u003e 5 Feet When Wet, 4 Feet When Dry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty Cycle:\u003c\/strong\u003e 15 Minutes Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Port:\u003c\/strong\u003e 1-1\/2 Inch Hose Barb and 1-1\/2 Inch NPT (Male)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Port:\u003c\/strong\u003e 1 Inch Hose Barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Particle Size:\u003c\/strong\u003e 1\/8 Inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMacerator Blades:\u003c\/strong\u003e 4-Blade Stainless Steel Cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller Material:\u003c\/strong\u003e Jabsco Nitrile Compound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal Type:\u003c\/strong\u003e Lip Type\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 4.72 Inches W x 3.74 Inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Complies with USCG Regulation 183.410 and ISO 8846 Marine\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis macerator pump is designed for general marine and RV holding tank installations and is not limited to a specific make or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Jabsco 18590-2092 used for?\u003c\/strong\u003e The Jabsco 18590-2092 Run Dry Macerator Waste Pump empties marine holding tanks when you are outside a discharge-restricted area, and it also works well for draining fish box and livewell receptacles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does this macerator pump empty a holding tank?\u003c\/strong\u003e A typical 30-gallon holding tank empties in less than 3 minutes with the Jabsco 18590-2092, and its 15-minute continuous duty cycle allows up to 180 gallons to be pumped in a single operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Jabsco 18590-2092 self-priming?\u003c\/strong\u003e Yes, this pump self-primes to 5 feet when wet and to 4 feet when dry, so it does not need to be flooded before startup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size particles can pass through the discharge?\u003c\/strong\u003e The stainless steel 4-blade cutter on the Jabsco 18590-2092 reduces solids to 1\/8 inch maximum before they pass through the 1 inch discharge port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this macerator pump run on?\u003c\/strong\u003e The Jabsco 18590-2092 operates on 12 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose sizes does the Jabsco 18590-2092 use?\u003c\/strong\u003e The inlet accepts a 1-1\/2 inch hose barb or 1-1\/2 inch NPT male fitting, and the outlet uses a 1 inch hose barb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pump protect against running dry?\u003c\/strong\u003e Yes, the Jabsco 18590-2092 includes a run-dry protection device that helps prevent damage if the pump is operated without fluid present.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the impeller made of?\u003c\/strong\u003e The impeller in the Jabsco 18590-2092 is made from Jabsco nitrile compound, paired with a lip-type seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Jabsco 18590-2092 ignition protected?\u003c\/strong\u003e Yes, it complies with USCG regulation 183.410 and ISO 8846 MARINE for ignition protection, making it suitable for use near gasoline engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this macerator pump weigh?\u003c\/strong\u003e The Jabsco 18590-2092 weighs 5.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Jabsco 18590-2092?\u003c\/strong\u003e This macerator pump delivers a flow rate of 12 gallons per minute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Jabsco 18590-2092 be used in an RV as well as a boat?\u003c\/strong\u003e Yes, this 12-volt macerator pump is suited to both RV and boat holding tank applications.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028221993179,"sku":"ITT-18590-2092","price":244.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18590__50847.1737865602.500.750.jpg?v=1785164560"},{"product_id":"jabsco-18660-0121-12v-water-puppy-pump-6-gpm-bronze-bilge-and-livewell-pump","title":"Jabsco 18660-0121 12V Water Puppy Pump, 6 GPM Bronze Bilge and Livewell Pump","description":"\u003cp\u003eThe Jabsco 18660-0121 is a heavy duty commercial 12-volt Water Puppy pump built for continuous marine pumping tasks. It uses a flexible impeller design that makes it well suited for livewell circulation, draining bait tanks, engine oil changing, washdown, bilge duty, or general purpose pumping wherever a compact, self-priming pump is needed. The pump head is bronze and the impeller is an oil-resistant nitrile compound, giving the unit a long service life in wet marine environments and around fuels and oils.\u003c\/p\u003e\u003cp\u003eThis is a self-priming pump that delivers high pressure at a 6 GPM flow rate. Because of its self-priming capability, it can be mounted up to 3 feet above the water source and installed in any orientation. Installation is straightforward: the pump fastens to a solid surface with four screws through the rubber mounting grommets molded into its base, and plumbing connects through one of three alternative port configurations before the motor lead wires are wired to a 12-volt DC power source. The pump is ignition protected, making it appropriate for use in gasoline engine spaces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18660-0121\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 6 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Head Material:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller Material:\u003c\/strong\u003e Oil-resistant nitrile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Priming Height:\u003c\/strong\u003e Up to 3 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Size:\u003c\/strong\u003e 1\/2 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 15 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Ignition protected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Any position; four-screw rubber grommet base mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 10 inches L x 6 inches W x 5 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 671880532112\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat flow rate does the Jabsco 18660-0121 Water Puppy pump deliver?\u003c\/strong\u003e The Jabsco 18660-0121 Water Puppy pump delivers a 6 GPM flow rate at high pressure, making it suitable for livewell circulation, bait tank draining, bilge duty, and washdown use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18660-0121 a 12-volt or 24-volt pump?\u003c\/strong\u003e It runs on 12 volts DC. A 24-volt version of the Water Puppy pump is sold separately as a different part number for boats with 24-volt electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Jabsco 18660-0121 pump mounted?\u003c\/strong\u003e The pump fastens to a solid surface using four screws through the rubber mounting grommets built into its base, and it can be mounted in any position since it is self-priming.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far above the water source can this pump be installed?\u003c\/strong\u003e Because the 18660-0121 is self-priming, it can be located up to 3 feet above the water source rather than requiring a fully flooded suction line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pump head and impeller made of?\u003c\/strong\u003e The Jabsco 18660-0121 has a bronze pump head paired with an oil-resistant nitrile impeller, a combination chosen for long service life in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat port size does the Water Puppy pump use?\u003c\/strong\u003e The 18660-0121 uses 1\/2 inch NPT ports for plumbing connections, with alternative connection methods available at the pump's inlet and outlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump safe to use in a gasoline engine compartment?\u003c\/strong\u003e Yes, the Jabsco 18660-0121 is ignition protected, which makes it suitable for installation in spaces with gasoline engines or fuel vapors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat can the Jabsco 18660-0121 pump be used for besides bilge pumping?\u003c\/strong\u003e Beyond bilge duty, this pump is designed for livewell circulation, draining bait tanks, engine oil changing, washdown tasks, and general purpose transfer pumping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Jabsco 18660-0121 pump weigh?\u003c\/strong\u003e The Jabsco 18660-0121 Water Puppy pump weighs 5.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage draw should I plan for when wiring this pump?\u003c\/strong\u003e The 18660-0121 draws up to 15 amps, so wiring and fusing should be sized accordingly when connecting it to a 12-volt DC circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Jabsco 18660-0121 Water Puppy pump manufactured?\u003c\/strong\u003e This pump's country of origin is China.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028222025947,"sku":"ITT-18660-0121","price":230.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Jabsco_18660-0121_12V_Water_Puppy_Pump__66193.1722359317.500.750.jpg?v=1785164559"},{"product_id":"jabsco-18670-0943-24v-water-puppy-commercial-duty-pump-6-gpm-bronze-self-priming","title":"Jabsco 18670-0943 24V Water Puppy Commercial Duty Pump, 6 GPM Bronze Self-Priming","description":"\u003cp\u003eThe Jabsco 18670-0943 is a commercial duty 24V Water Puppy pump built for demanding onboard pumping tasks such as livewell circulation, draining bait tanks, engine oil changing, washdown, and bilge duty. It uses a flexible oil resistant nitrile impeller paired with a bronze pump head, giving the pump a long service life in a marine environment. The pump delivers a 6 GPM flow rate at high pressure, and its self-priming design lets it be located up to 3 feet above the water source. Because it is self-priming, the pump can be mounted in any position, giving installers flexibility when planning plumbing runs and wire routing.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the pump fastens to a solid mounting surface using four screws through the rubber mounting grommets molded into its base, which also help isolate vibration. Plumbing connects to the pump ports using one of three alternative connection methods built into the housing, and the motor lead wires connect directly to the 24V electrical power source. The pump is ignition protected, making it suitable for use in gasoline engine spaces. With its 6 GPM flow rate and bronze construction, the Water Puppy 18670-0943 is intended for boat owners and marine service technicians who need a reliable, high-pressure 24V utility pump for repeated commercial duty use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18670-0943\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 24 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 6 GPM (Gallons Per Minute)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Current:\u003c\/strong\u003e 15 Amps, Non-CE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Connection:\u003c\/strong\u003e 1\/2 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Head Material:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller Material:\u003c\/strong\u003e Oil Resistant Nitrile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Priming Height:\u003c\/strong\u003e Up to 3 feet above the water source\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Any position; four screws through rubber mounting grommets in the base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Ignition protected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 671880532136\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal 24V utility pump for livewell circulation, bait tank draining, engine oil changing, washdown, and bilge pumping applications; it is not restricted to a specific engine or boat model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Jabsco 18670-0943 pump run on?\u003c\/strong\u003e The Jabsco 18670-0943 is a 24 Volt DC pump, built for commercial duty applications where 24V power is available onboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of this pump?\u003c\/strong\u003e The Jabsco 18670-0943 Water Puppy pump delivers a 6 GPM (gallons per minute) flow rate at high pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow high above the water can this pump be mounted?\u003c\/strong\u003e Thanks to its self-priming design, the 18670-0943 can be located up to 3 feet above the water source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the pump be mounted in any orientation?\u003c\/strong\u003e Yes, because the 18670-0943 is self-priming it can be mounted in any position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pump head made of?\u003c\/strong\u003e The Jabsco 18670-0943 has a bronze pump head, chosen for long service life in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the impeller made from?\u003c\/strong\u003e An oil resistant nitrile impeller is used inside the 18670-0943, which holds up well to engine oil changing and general pumping duties.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump ignition protected?\u003c\/strong\u003e Yes, the 18670-0943 is ignition protected, making it suitable for installation in gasoline engine compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the pump ports?\u003c\/strong\u003e The 18670-0943 uses 1\/2 inch NPT port connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much current does this pump draw?\u003c\/strong\u003e The 18670-0943 is rated at 15 amps, Non-CE.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the pump mounted and plumbed?\u003c\/strong\u003e The 18670-0943 fastens to a solid surface with four screws through the rubber mounting grommets in its base, and the plumbing connects to the pump ports using one of three alternative connection methods provided; motor lead wires then connect to the 24V power source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is this pump used for?\u003c\/strong\u003e The Jabsco 18670-0943 is used for livewell circulation, draining bait tanks, engine oil changing, washdown, bilge pumping, and general pumping applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18670-0943 pump weigh?\u003c\/strong\u003e The Jabsco 18670-0943 weighs 7 pounds.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028222058715,"sku":"ITT-18670-0943","price":447.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Jabsco_18670-0943_Water_Puppy_Pump__07226.1722494178.500.750.jpg?v=1785164560"},{"product_id":"jabsco-18670-9407-mastercraft-ballast-pump-12v-reversible-9-gpm-replaces-mastercraft-300249","title":"Jabsco 18670-9407 Mastercraft Ballast Pump, 12V Reversible, 9 GPM, Replaces Mastercraft 300249","description":"\u003cp\u003eThe Jabsco 18670-9407 Mastercraft Ballast Pump is a reversible pump built to both fill and empty a boat's ballast tank, giving wakeboard and wake surf boat owners control over ballast weight from a single pump. It moves approximately 80 pounds of ballast water every minute at a 9 GPM (34 LPM) flow rate, and its self-priming design lets it be mounted up to 3 feet above the water source. The pump is constructed with a bronze pump head paired with an oil-resistant nitrile impeller, giving it a long service life in continuous marine use. It runs on a nominal 12 VDC supply, draws up to 12A maximum current, and should be protected with a 20A fuse. Plumbing connects via a 1 inch hose barb or 1\/2 inch NPT internal port. Beyond ballast duty, the same bronze-and-nitrile construction makes it suitable for bilge pumping, livewell circulation, draining bait tanks, engine oil changing, and washdown applications. The pump meets USCG 183.410 and ISO 8846 Marine ignition protection standards, making it safe for use in gasoline engine compartments. It is built as a direct functional replacement for the Mastercraft 300249 ballast pump, so it drops into systems designed around that part.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18670-9407\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Ballast Pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Type:\u003c\/strong\u003e Reversible (fill and empty)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 9 GPM (34 LPM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBallast Fill Rate:\u003c\/strong\u003e Approximately 80 pounds of water per minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Voltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Current:\u003c\/strong\u003e 12A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Fuse:\u003c\/strong\u003e 20A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Priming:\u003c\/strong\u003e Up to 3 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Size:\u003c\/strong\u003e 1 inch hose barb or 1\/2 inch NPT internal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Head Material:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller Material:\u003c\/strong\u003e Oil-resistant nitrile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e USCG 183.410 and ISO 8846 Marine compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 671880629003\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned as a functional replacement for the Mastercraft 300249 ballast pump.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMastercraft 300249\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Jabsco 18670-9407 Mastercraft Ballast Pump replace?\u003c\/strong\u003e The Jabsco 18670-9407 is a direct functional replacement for the Mastercraft 300249 ballast pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this ballast pump reversible?\u003c\/strong\u003e Yes, the Jabsco 18670-9407 is a reversible pump, so it can both fill and empty a ballast tank rather than only pumping in one direction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat flow rate does this pump deliver?\u003c\/strong\u003e It delivers a 9 GPM (34 LPM) flow rate, moving approximately 80 pounds of ballast water per minute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Jabsco 18670-9407 run on?\u003c\/strong\u003e This pump runs on a nominal 12 VDC power supply, with a maximum current draw of 12A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fuse should be used with this pump?\u003c\/strong\u003e A 20A fuse is recommended for the Jabsco 18670-9407 Mastercraft Ballast Pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far above the water source can this pump be mounted?\u003c\/strong\u003e Because it is self-priming, the Jabsco 18670-9407 can be mounted up to 3 feet above the water source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pump head and impeller made of?\u003c\/strong\u003e The pump has a bronze pump head paired with an oil-resistant nitrile impeller, giving it durability for continuous marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this ballast pump ignition protected for gasoline engine compartments?\u003c\/strong\u003e Yes, the 18670-9407 meets USCG 183.410 and ISO 8846 Marine ignition protection standards, making it safe for gasoline engine bilge and ballast applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat plumbing connections does this pump use?\u003c\/strong\u003e The Jabsco 18670-9407 connects via a 1 inch hose barb or a 1\/2 inch NPT internal port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this pump be used for anything besides ballast?\u003c\/strong\u003e Yes, in addition to ballast fill and empty duty, the bronze-and-nitrile construction of the 18670-9407 also suits bilge pumping, livewell circulation, draining bait tanks, engine oil changing, and washdown applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Jabsco 18670-9407 Mastercraft Ballast Pump weigh?\u003c\/strong\u003e The pump weighs 7.2 pounds.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028222091483,"sku":"ITT-18670-9407","price":362.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ITT-18670-9407__33595.1722501846.500.750.jpg?v=1785164565"},{"product_id":"jabsco-accumulator-tank-30573-0000-1-liter-125-psi-pressurized-water-system-tank","title":"Jabsco Accumulator Tank 30573-0000, 1 Liter, 125 PSI Pressurized Water System Tank","description":"\u003cp\u003eThe Jabsco Accumulator Tank 30573-0000 is designed for installation in any pumped water system that is controlled by a pressure switch, such as boats, RVs, motor caravans, and coaches using pumps like the Jabsco PAR-MATE 2.5 or other Jabsco pressure pumps. Its internal bladder smooths water flow and reduces the on\/off cycling of the pump by lessening the variation in pressure and flow between the pump and the outlets in the system.\u003c\/p\u003e\u003cp\u003eThis even flow gives better control of hot water temperature, which is especially noticeable with instantaneous gas water heaters and showers. The reduced on\/off cycling also lowers noise from the pump motor and from shock pressures (pipe hammer), while reducing battery drain and extending pump life. The tank is built from hygienic, light, impact and pressure resistant plastic in a compact size that is simple to fit into new or existing systems. Snap-in port fittings include both 1\/2 inch barbed hose fittings and 1\/2 inch threaded hose fittings, so it can be connected to a variety of hose setups.\u003c\/p\u003e\u003cp\u003eThe 30573-0000 holds a capacity of 1 Liter (33 fl oz), is regulated to 125 psi (8.6 bar), and is pre-charged to 10 psi (0.7 bar).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 30573-0000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Accumulator Tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 1 Liter (33 fl oz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulated Pressure:\u003c\/strong\u003e 125 psi (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Charged Pressure:\u003c\/strong\u003e 10 psi (0.7 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 13-1\/4 x 4-3\/4 inches (33.7 x 11.9 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBladder Type:\u003c\/strong\u003e Internal Bladder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Fittings:\u003c\/strong\u003e 1\/2 inch Barbed Hose Fittings and 1\/2 inch Threaded Hose Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 671880026819\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Jabsco Accumulator Tank 30573-0000 do?\u003c\/strong\u003e The Jabsco Accumulator Tank 30573-0000 smooths water flow and reduces on\/off cycling of a pressure pump by lessening the variation in pressure and flow between the pump and the outlets in the system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat pumps is the 30573-0000 accumulator tank meant to work with?\u003c\/strong\u003e It is intended for installation in any pumped water system controlled by a pressure switch, such as the Jabsco PAR-MATE 2.5 or other Jabsco pressure pumps used in boats, RVs, motor caravans, and coaches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the capacity of this accumulator tank?\u003c\/strong\u003e The Jabsco 30573-0000 has a capacity of 1 Liter, equal to 33 fl oz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat pressure rating does the 30573-0000 tank have?\u003c\/strong\u003e The tank is regulated to 125 psi (8.6 bar) and comes pre-charged to 10 psi (0.7 bar).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Jabsco Accumulator Tank 30573-0000 weigh?\u003c\/strong\u003e This accumulator tank weighs 1.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 30573-0000 accumulator tank?\u003c\/strong\u003e The tank measures 13-1\/4 x 4-3\/4 inches (33.7 x 11.9 cm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Jabsco 30573-0000 accumulator tank made from?\u003c\/strong\u003e It is made from a hygienic, light, and compact plastic construction that is resistant to impact and pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose fittings come with this accumulator tank?\u003c\/strong\u003e The Jabsco 30573-0000 has snap-in port fittings that include both 1\/2 inch barbed hose fittings and 1\/2 inch threaded hose fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I add an accumulator tank to my water pump system?\u003c\/strong\u003e An accumulator tank like the Jabsco 30573-0000 reduces pump on\/off cycling, which lowers pump motor noise and shock pressure (pipe hammer), reduces battery drain, and extends pump life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the accumulator tank improve hot water temperature control?\u003c\/strong\u003e Yes, the even water flow provided by the Jabsco 30573-0000 gives better control of hot water temperature, which is especially noticeable with instantaneous gas water heaters and showers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 30573-0000 use an internal or external bladder?\u003c\/strong\u003e The Jabsco 30573-0000 uses an internal bladder to smooth flow and even out pressure variation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Jabsco Accumulator Tank 30573-0000?\u003c\/strong\u003e This accumulator tank is black.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028222615771,"sku":"ITT-30573-0000","price":105.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ITT-30573-0000_lg__99111.1558115178.500.750.jpg?v=1785164576"},{"product_id":"jabsco-par-max-2-fresh-water-pump-12v-2-gpm-35-psi-model-31295-3512-3a","title":"Jabsco Par-Max 2 Fresh Water Pump, 12V, 2 GPM, 35 PSI, Model 31295-3512-3A","description":"\u003cp\u003eThe Jabsco Par-Max 2 Fresh Water Pump (31295-3512-3A) is a 12V diaphragm pump built to bring home-style water delivery to an onboard freshwater system. It uses a pressure-controlled diaphragm and an integrated sealed pressure switch to run on demand, starting automatically when a tap opens and shutting off when pressure is restored. The pump is self-priming and can run dry without damage to the unit, so an empty tank or an air pocket in the line will not burn out the motor.\u003c\/p\u003e\u003cp\u003eAn enclosed motor design supports a long working life under sustained high pressure, and an integrated bypass module reduces cycling for smoother, more consistent flow at the tap. Dampening feet are built into the housing to absorb vibration, keeping the pump quiet during operation. Installation and servicing are simplified with quick-connect ports: the pump comes equipped with an inline 40 mesh quick-connect strainer to protect the diaphragm from debris, along with two 1\/2 inch quick-connect straight hosebarb fittings.\u003c\/p\u003e\u003cp\u003eRated for 2 GPM (7.6 LPM) of open flow at 35 PSI on a 12V system, this pump suits smaller freshwater demands such as galley sinks, single-head washdown, or backup supply where a compact, quiet, on-demand pump is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 31295-3512-3A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen Flow:\u003c\/strong\u003e 2 GPM (7.6 LPM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e 35 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick Connect Strainer:\u003c\/strong\u003e Inline 40 Mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHosebarb Fittings:\u003c\/strong\u003e 2 x 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 6 inches L x 15 inches W x 6 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 671880841764\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat flow rate and pressure does the Jabsco Par-Max 2 pump deliver?\u003c\/strong\u003e The Jabsco Par-Max 2 (31295-3512-3A) delivers 2 GPM (7.6 LPM) of open flow at 35 PSI on a 12V system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this pump run dry without being damaged?\u003c\/strong\u003e Yes, the Par-Max 2 fresh water pump is designed to run dry without damage to the unit, so an empty tank or air in the line will not harm the motor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Jabsco Par-Max 2 self-priming?\u003c\/strong\u003e It is self-priming, which means it does not need to be manually primed before use during installation or after the system has run dry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the pump turn on and off automatically?\u003c\/strong\u003e An integrated sealed pressure switch controls on-demand operation: the 31295-3512-3A pump starts when water pressure drops (a tap opens) and stops once pressure is restored.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose fittings does this pump use?\u003c\/strong\u003e The Par-Max 2 comes equipped with two 1\/2 inch quick-connect straight hosebarb fittings for the inlet and outlet lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the pump include a strainer?\u003c\/strong\u003e Yes, an inline 40 mesh quick-connect strainer is included to filter debris out of the water before it reaches the diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Jabsco Par-Max 2 weigh?\u003c\/strong\u003e This fresh water pump weighs 5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this pump require?\u003c\/strong\u003e The Par-Max 2 is a 12V pump, matching standard marine and RV DC electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Jabsco Par-Max 2 noisy when running?\u003c\/strong\u003e No, it is built for quiet operation, using dampening feet in the housing to reduce vibration and running noise.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 31295-3512-3A pump?\u003c\/strong\u003e The pump measures 6 inches long by 15 inches wide by 6 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this pump used for?\u003c\/strong\u003e The Jabsco Par-Max 2 is a freshwater system pump intended for on-demand water delivery, such as at a galley sink or washdown point, similar to home water pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the pump housing made of?\u003c\/strong\u003e The Par-Max 2 fresh water pump has a black plastic housing.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028222681307,"sku":"ITT-31295-3512-3A","price":139.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Jabsco_Par-Max_2_Fresh_Water_Pump__10186.1739476101.500.750.jpg?v=1785164576"},{"product_id":"jabsco-par-max-3-fresh-water-pump-31395-4012-3a-12v-3-gpm-40-psi-self-priming","title":"Jabsco Par-Max 3 Fresh Water Pump 31395-4012-3A - 12V, 3 GPM, 40 PSI Self-Priming","description":"\u003cp\u003eThe Jabsco Par-Max 3 is a 12V fresh water pump built to bring home-style water pressure to a boat's onboard plumbing. A pressure-controlled diaphragm delivers on-demand flow through an integrated sealed pressure switch, so the pump cycles on automatically whenever a tap or shower is opened and shuts off when it closes. The pump is self-priming and can run dry without damage to the unit, which protects it if the tank runs low or a line loses prime.\u003c\/p\u003e\u003cp\u003eAn enclosed motor design gives the pump a long working life even when running at higher pressures, while an integrated bypass module reduces cycling and smooths out flow at the tap. Dampening feet under the housing absorb vibration so the pump runs quietly below decks. Plumbing connections are simplified with quick-connect ports: the pump ships with an inline 40 mesh quick-connect strainer to catch debris before it reaches the diaphragm, along with 2 x 1\/2 inch quick-connect straight hosebarb fittings for fast hookup and servicing.\u003c\/p\u003e\u003cp\u003eRated for 3 GPM (7.6 LPM) of open flow at 40 PSI, the Par-Max 3 suits boats and RVs with multiple freshwater outlets that need consistent pressure across sinks, showers, and washdown points.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 31395-4012-3A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Submersible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 3 Gallons Per Minute (7.6 LPM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pressure:\u003c\/strong\u003e 40 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick Connect Strainer:\u003c\/strong\u003e Inline 40 Mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHosebarb Fittings:\u003c\/strong\u003e 2 x 1\/2 inch adapters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 9.09 inches L x 4.21 inches W x 4.21 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Corded Electric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 671880841801\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat flow rate and pressure does the Jabsco Par-Max 3 pump deliver?\u003c\/strong\u003e The Par-Max 3 (31395-4012-3A) delivers 3 GPM (7.6 LPM) of open flow at 40 PSI, making it suited to boats with several freshwater outlets running at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump self-priming?\u003c\/strong\u003e Yes, the 31395-4012-3A is self-priming and can run dry without damage to the unit, so a low tank or momentary loss of prime will not harm the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this water pump run on?\u003c\/strong\u003e This Jabsco fresh water pump operates on 12 volts, the standard supply for most boat and RV DC electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the pump turn on and off automatically?\u003c\/strong\u003e An integrated sealed pressure switch gives the Par-Max 3 on-demand operation, cycling the pump on when a tap opens and off when pressure builds back up with the tap closed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the 31395-4012-3A pump?\u003c\/strong\u003e The pump measures 9.09 inches long by 4.21 inches wide by 4.21 inches high and weighs 5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pump housing made of?\u003c\/strong\u003e The Par-Max 3 uses a plastic housing in black, which helps protect the motor from corrosion in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fittings and strainer come with this pump?\u003c\/strong\u003e It comes equipped with an inline 40 mesh quick-connect strainer to filter debris, plus 2 x 1\/2 inch quick-connect straight hosebarb fittings for hookup and servicing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Par-Max 3 compare to the Par-Max 2 pump?\u003c\/strong\u003e The Par-Max 3 (31395-4012-3A) is rated for 3 GPM at 40 PSI, while the Par-Max 2 is rated for 2 GPM at 35 PSI; both use the same quick-connect strainer and hosebarb fitting design, so the Par-Max 3 is the higher-flow, higher-pressure option of the two.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this pump run quietly below decks?\u003c\/strong\u003e Dampening feet under the 31395-4012-3A housing absorb vibration, and an integrated bypass module reduces cycling for quieter, smoother operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the enclosed motor affect the pump's lifespan?\u003c\/strong\u003e Yes, the enclosed motor design on this Jabsco pump is built for a long working life even when the pump is running at higher pressures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Jabsco Par-Max 3 pump?\u003c\/strong\u003e The 31395-4012-3A ships with the pump unit, an inline 40 mesh quick-connect strainer, and 2 x 1\/2 inch quick-connect straight hosebarb fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this fresh water pump?\u003c\/strong\u003e The Jabsco Par-Max 3 fresh water pump, part number 31395-4012-3A, carries a 1 year warranty.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028222877915,"sku":"ITT-31395-4012-3A","price":148.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Jabsco_Par-Max_3_FreshWater_Pump__64972.1722348268.500.750.jpg?v=1785164576"},{"product_id":"jabsco-37121-0010-pressure-switch-for-36950-series-water-pumps","title":"Jabsco 37121-0010 Pressure Switch for 36950 Series Water Pumps","description":"\u003cp\u003eThe Jabsco 37121-0010 is a replacement pressure switch designed for 36950 series water pumps. This switch kit restores automatic pump operation by sensing system pressure and cycling the pump motor on and off as demand changes, which is the core function that keeps a fresh water system running without manual intervention.\u003c\/p\u003e\u003cp\u003eBuilt for 12V DC marine electrical systems, the switch uses a normally open contact design with a plunger-style actuator that responds to pressure changes in the pump housing. The switch body is constructed of brass for corrosion resistance in a marine environment, and it mounts directly to the pump housing using a surface mount configuration with screw terminals for the electrical connections.\u003c\/p\u003e\u003cp\u003eThis is a direct fit replacement part for Jabsco 36950 series water pumps, making it a straightforward swap when the original pressure switch fails or begins cycling erratically. Because it ships as a complete switch kit, no additional hardware sourcing is needed to complete the replacement.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 37121-0010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Pressure Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Plunger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Pumps:\u003c\/strong\u003e 36950 Series Water Pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 671880032971\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eJabsco 36950 series water pumps\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat pumps does the Jabsco 37121-0010 pressure switch fit?\u003c\/strong\u003e The Jabsco 37121-0010 is a replacement pressure switch for 36950 series water pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the Jabsco 37121-0010 pressure switch rated for?\u003c\/strong\u003e This switch is rated for 12V DC marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pressure switch made of?\u003c\/strong\u003e The 37121-0010 switch body is made of brass for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the pressure switch mount to the pump?\u003c\/strong\u003e It uses a surface mount configuration that attaches directly to the 36950 series pump housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of electrical contact does this switch use?\u003c\/strong\u003e The Jabsco 37121-0010 uses a normally open contact design with a plunger-style actuator that responds to pressure changes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the electrical connections made on this switch?\u003c\/strong\u003e The 37121-0010 pressure switch uses screw terminals for wiring the electrical connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Jabsco part?\u003c\/strong\u003e Yes, part number 37121-0010 is a genuine Jabsco replacement switch kit for 36950 series pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the switch kit?\u003c\/strong\u003e The Jabsco 37121-0010 kit includes the replacement pressure switch for installation on a 36950 series water pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the pressure switch weigh?\u003c\/strong\u003e The Jabsco 37121-0010 pressure switch weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace this switch?\u003c\/strong\u003e A pressure switch is typically replaced when a 36950 series water pump fails to cycle on and off properly or stops responding to pressure changes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the 37121-0010 switch myself?\u003c\/strong\u003e The 37121-0010 is a direct fit replacement that mounts to the existing 36950 series pump housing using its screw terminal connections.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028223140059,"sku":"ITT-37121-0010","price":70.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ITT-37121-0010_lg__17782.1558115743.500.750.jpg?v=1785164580"},{"product_id":"jabsco-in-line-water-pressure-regulator-45-psi-3-4-ght-compact-dockside-regulator-44411-0045","title":"Jabsco In-Line Water Pressure Regulator, 45 PSI, 3\/4 GHT Compact Dockside Regulator 44411-0045","description":"\u003cp\u003eThe Jabsco In-Line Water Pressure Regulator (44411-0045) protects your boat's onboard water system from the high, unpredictable pressure common at marina docksides and campground faucets. It automatically regulates incoming water pressure of 46-125 psi down to a safe, consistent 45 psi (variance of plus or minus 5 psi), while lower pressures are allowed to pass through unregulated so you are never left without flow. A built-in backflow preventer stops water from siphoning back into the public supply, which is a common dockside and RV water-hookup requirement.\u003c\/p\u003e\u003cp\u003eAn easy-cleaning strainer sits ahead of the regulating mechanism to catch pipe scale and debris before it can damage downstream valves and seal seats; the strainer is removable for quick rinsing. The regulator is built from UV-resistant plastic to hold up to sun exposure at the dock, is rated for a 33-150 F working temperature range, and ships with a dust cap to keep the inlet clean during storage. At only 3 inches (77mm) long, this is a compact in-line model that installs directly between your hose and the boat's water inlet using 3\/4 GHT(f) inlet and 3\/4 GHT(m) outlet fittings, requiring no permanent mounting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 44411-0045\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e In-Line Water Pressure Regulator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulated Output Pressure:\u003c\/strong\u003e 45 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Pressure Range:\u003c\/strong\u003e 46-125 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Variance:\u003c\/strong\u003e plus or minus 5 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Connection:\u003c\/strong\u003e 3\/4 GHT (female)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Connection:\u003c\/strong\u003e 3\/4 GHT (male)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-resistant plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Temperature Range:\u003c\/strong\u003e 33-150 F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3 inches (77mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 671880545075\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Jabsco 44411-0045 pressure regulator do?\u003c\/strong\u003e It automatically reduces incoming water pressure from 46-125 psi down to a safe 45 psi, protecting your boat's plumbing from the high pressure found at marina docks and campground faucets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the regulated pressure vary?\u003c\/strong\u003e Output on the Jabsco 44411-0045 regulator varies by plus or minus 5 psi around its 45 psi target.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens if the incoming water pressure is already low?\u003c\/strong\u003e Pressures below the 46-125 psi regulating range pass through the 44411-0045 unregulated, so low-pressure dockside connections still deliver normal flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this regulator include a backflow preventer?\u003c\/strong\u003e Yes, the Jabsco 44411-0045 has a built-in backflow preventer that stops water from siphoning back into the public water supply, which many marinas and campgrounds require.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fittings does the 44411-0045 use?\u003c\/strong\u003e It has a 3\/4 GHT(f) inlet and a 3\/4 GHT(m) outlet, the standard garden-hose-thread size used on most dockside and RV water connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the in-line or the flush-mount version of the Jabsco regulator?\u003c\/strong\u003e The 44411-0045 is the compact in-line model that connects between the hose and boat inlet; Jabsco also makes a flush-mount version (44411-1045) that mounts permanently into the vessel's superstructure with a 1\/2 inch-14 pipe swivel-elbow outlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the in-line regulator?\u003c\/strong\u003e The Jabsco 44411-0045 is a compact design measuring only 3 inches (77mm) long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the regulator made of?\u003c\/strong\u003e It is molded from UV-resistant plastic so it can be left connected outdoors at the dock without degrading in sunlight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I clean the strainer on this regulator?\u003c\/strong\u003e The 44411-0045 has a removable, easy-cleaning strainer built in ahead of the regulating valve that catches pipe scale and debris and can be pulled out and rinsed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can this regulator handle?\u003c\/strong\u003e The Jabsco 44411-0045 is rated for a working temperature of 33-150 F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Jabsco in-line pressure regulator weigh?\u003c\/strong\u003e It weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the regulator come with a cap for storage?\u003c\/strong\u003e Yes, the 44411-0045 includes a dust cap to keep the inlet fitting clean when the regulator is not connected.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028223336667,"sku":"ITT-44411-0045","price":65.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/itt-44411-0045_lg__64925.1558116028.500.750.jpg?v=1785164584"},{"product_id":"jabsco-flush-mount-water-pressure-regulator-45-psi-white-44411-1045","title":"Jabsco Flush Mount Water Pressure Regulator, 45 PSI, White, 44411-1045","description":"\u003cp\u003eThe Jabsco Flush Mount Pressure Regulator (44411-1045) protects a boat's onboard water system by automatically stepping incoming water pressure of 46-125 psi down to a safe, regulated 45 psi, with a variance of plus or minus 5 psi. Pressures already below that range pass through unregulated, so the same regulator works whether it is connected to a full-pressure dock-side main or a lower-pressure campground faucet. A built-in backflow preventer keeps water from siphoning back into the supply line, and a removable, easy-clean strainer catches pipe scale and other debris before it can damage downstream valves and seal seats.\u003c\/p\u003e\u003cp\u003eUnlike a hose-mounted in-line unit, this is a flush-mount design that installs permanently into the vessel's superstructure, making it a direct replacement for most original city water entry fittings. It has a 3\/4 GHT female inlet and a 1\/2 inch-14 pipe 90 degree swivel-elbow outlet, and the housing is molded from UV-resistant plastic with a crack-resistant mounting flange to hold up to sun and deck exposure. A dust cap is included to keep the inlet clean when not in use, and the regulator is rated for working temperatures from 33 to 150 degrees Fahrenheit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 44411-1045\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Flush Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Fitting:\u003c\/strong\u003e 3\/4 GHT (female)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Fitting:\u003c\/strong\u003e 1\/2 inch-14 pipe, 90 degree swivel elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulated Output Pressure:\u003c\/strong\u003e 45 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Pressure Range:\u003c\/strong\u003e 46 to 125 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Variance:\u003c\/strong\u003e plus or minus 5 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-resistant plastic with crack-resistant mounting flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Temperature Range:\u003c\/strong\u003e 33 to 150 degrees Fahrenheit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3 1\/2 inches deep x 4 3\/8 inches high x 4 3\/8 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 671880545082\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat pressure does the Jabsco 44411-1045 regulate city water down to?\u003c\/strong\u003e The Jabsco Flush Mount Pressure Regulator (44411-1045) automatically reduces incoming water pressure of 46-125 psi down to a regulated 45 psi, with a variance of plus or minus 5 psi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this regulator work with low-pressure dock or campground water?\u003c\/strong\u003e Yes. Pressures below the regulation range pass through unregulated, so the 44411-1045 works whether connected to a full-pressure dock main or a lower-pressure campground faucet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 44411-1045 mounted?\u003c\/strong\u003e This is a flush-mount pressure regulator that installs permanently in the vessel's superstructure, making it a direct replacement for most original city water entry fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fittings does the Jabsco flush mount regulator use?\u003c\/strong\u003e The 44411-1045 has a 3\/4 GHT female inlet and a 1\/2 inch-14 pipe 90 degree swivel-elbow outlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this regulator?\u003c\/strong\u003e The Jabsco 44411-1045 flush mount pressure regulator is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the regulator made of?\u003c\/strong\u003e It is built from UV-resistant plastic with a crack-resistant mounting flange, suited to a marine deck environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the regulator filter incoming water?\u003c\/strong\u003e Yes, the 44411-1045 includes a removable, easy-clean strainer that protects downstream valves and seal seats from pipe scale and debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there backflow protection built in?\u003c\/strong\u003e Yes, a built-in backflow preventer is part of the 44411-1045 design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the flush mount regulator?\u003c\/strong\u003e The Jabsco 44411-1045 measures 3 1\/2 inches deep by 4 3\/8 inches high by 4 3\/8 inches wide and weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can this regulator handle?\u003c\/strong\u003e The 44411-1045 is rated for working temperatures from 33 to 150 degrees Fahrenheit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between this and Jabsco's in-line regulator?\u003c\/strong\u003e The 44411-1045 is the flush-mount version that installs permanently into the boat's structure, while Jabsco's compact in-line model connects between hoses and is only 3 inches long; both regulate to the same 45 psi output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it come with a dust cap?\u003c\/strong\u003e Yes, a dust cap is included with the 44411-1045 to keep the inlet fitting clean when disconnected.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028223369435,"sku":"ITT-44411-1045","price":76.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ITT-44411-1045_lg__81908.1558116077.500.750.jpg?v=1785164584"},{"product_id":"jabsco-hd3-par-max-12v-fresh-water-pump-3-gpm-40-psi-q301j-115s-3a","title":"Jabsco HD3 Par-Max 12V Fresh Water Pump - 3 GPM, 40 PSI, Q301J-115S-3A","description":"\u003cp\u003eThe Jabsco HD3 Par-Max is a 12V diaphragm-type fresh water pump built to deliver on-demand water pressure for onboard plumbing systems, giving boaters a freshwater supply that runs like a home system. A pressure-controlled diaphragm and integrated, sealed pressure switch turn the pump on automatically whenever a tap or fixture opens, then shut it off once system pressure is satisfied. The pump is self-priming and can run dry without damage to the unit, so accidental tank depletion or air in the line will not harm the motor.\u003c\/p\u003e\u003cp\u003eConstruction centers on a heavy duty motor cast in an aluminum housing, built for a long working life under sustained high pressure. An integrated bypass module reduces cycling and smooths out flow delivery, while dampening feet at the mounting base cut vibration for quieter operation. Installation and servicing are simplified with quick-connect ports throughout: the pump comes equipped with an inline 40 mesh quick-connect strainer and two 1\/2 inch quick-connect straight hosebarb fittings, so it drops into standard 1\/2 inch water line runs.\u003c\/p\u003e\u003cp\u003eRated for 3 GPM open flow (11 LPM) at 40 PSI on a 12V DC supply, the Jabsco HD3 Par-Max suits galley, head, and shower plumbing on boats where a compact, quiet, self-priming pump is needed. It is part of the Jabsco Par-Max lineup, which also includes higher-flow HD4 variants for larger demand systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e Q301J-115S-3A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen Flow Rate:\u003c\/strong\u003e 3 GPM (11 LPM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure (Cut-Off):\u003c\/strong\u003e 40 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrainer:\u003c\/strong\u003e Inline 40 mesh quick-connect strainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHosebarb Fittings:\u003c\/strong\u003e 2 x 1\/2 inch quick-connect straight hosebarbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Priming:\u003c\/strong\u003e Yes, can run dry without damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Switch:\u003c\/strong\u003e Integrated, sealed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Width:\u003c\/strong\u003e 4.29 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 671880841832\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat flow rate and pressure does this pump deliver?\u003c\/strong\u003e The Jabsco HD3 Par-Max (Q301J-115S-3A) delivers 3 GPM (11 LPM) open flow at a 40 PSI pressure switch cut-off setting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump self-priming?\u003c\/strong\u003e Yes, the HD3 Par-Max is self-priming and can run dry without damage to the pump, which protects it if a tank runs empty or air gets into the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Jabsco HD3 Par-Max run on?\u003c\/strong\u003e It runs on a 12V DC electrical system, standard for most boats with a 12-volt house battery bank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose fittings does it use?\u003c\/strong\u003e The pump ships with two 1\/2 inch quick-connect straight hosebarb fittings, so it connects to standard 1\/2 inch freshwater plumbing line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the pump include a strainer?\u003c\/strong\u003e Yes, an inline 40 mesh quick-connect strainer is included with the Q301J-115S-3A to filter debris before it reaches the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the pump turn on and off automatically?\u003c\/strong\u003e An integrated, sealed pressure switch on the HD3 Par-Max senses when a faucet or fixture opens and cycles the pump on, then shuts it off once line pressure is restored.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing made of?\u003c\/strong\u003e The HD3 Par-Max uses a heavy duty motor cast in an aluminum housing for durability, with a plastic pump body and black finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this pump weigh?\u003c\/strong\u003e The Jabsco HD3 Par-Max weighs 7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Jabsco part?\u003c\/strong\u003e Yes, this is the genuine Jabsco HD3 Par-Max pump, part number Q301J-115S-3A, not an aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from the Jabsco HD4 Par-Max pump?\u003c\/strong\u003e The HD3 Par-Max (Q301J-115S-3A) is rated for 3 GPM, while the Jabsco HD4 Par-Max line steps up to 4 GPM open flow, with versions available at 40 PSI or 60 PSI cut-off, for systems needing higher volume.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this pump cycle on and off frequently during use?\u003c\/strong\u003e No, the Q301J-115S-3A includes an integrated bypass module that reduces cycling and delivers a smoother, more consistent flow while a fixture is open.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the pump noisy when running?\u003c\/strong\u003e The HD3 Par-Max uses dampening mounting feet to reduce vibration, allowing for quieter operation compared to a pump without vibration isolation.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028223697115,"sku":"ITT-Q301J-115S-3A","price":181.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ITT-Q301J-115S-3A__21176.1722492017.500.750.jpg?v=1785164591"},{"product_id":"jabsco-par-max-hd4-fresh-water-pump-q401j-115s-3a-12v-4-gpm-40-psi-self-priming-diaphragm-pump","title":"Jabsco Par-Max HD4 Fresh Water Pump, Q401J-115S-3A, 12V 4 GPM 40 PSI Self-Priming Diaphragm Pump","description":"\u003cp\u003eThe Jabsco Par-Max HD4 Fresh Water Pump (Q401J-115S-3A) is a 12V diaphragm pump built to deliver on-demand freshwater supply for boats and RVs, moving 4 GPM (15 LPM) at up to 40 PSI. It uses a pressure-controlled diaphragm so the system behaves like a home water supply, cycling on automatically when a tap is opened and shutting off when pressure is satisfied, thanks to an integrated, sealed pressure switch.\u003c\/p\u003e\u003cp\u003eThis HD4 model steps up from Jabsco's standard Par-Max line with a heavy duty motor set in a cast aluminum housing for a longer working life under sustained high pressure, along with an integrated bypass module that reduces cycling and smooths out flow. Dampening feet under the pump reduce vibration for quiet running, and the pump is self-priming and can run dry without damage, which simplifies installation and protects the system if the supply line runs empty.\u003c\/p\u003e\u003cp\u003eInstallation and servicing are built around quick-connect fittings: the pump comes equipped with an inline 40 mesh quick-connect strainer to protect the diaphragm from debris, plus two 1\/2 inch quick-connect straight hosebarb fittings for fast, tool-light hookup to existing freshwater plumbing. The housing is a black plastic construction paired with the cast aluminum motor housing, sized at 9.41 inches long by 3.9 inches wide by 4.23 inches high, and weighing 7.8 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e Q401J-115S-3A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Style:\u003c\/strong\u003e Diaphragm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen Flow:\u003c\/strong\u003e 4 GPM (15 LPM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pressure:\u003c\/strong\u003e 40 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrainer:\u003c\/strong\u003e Inline 40 Mesh Quick-Connect Strainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHosebarb Fittings:\u003c\/strong\u003e 2 x 1\/2 inch Quick-Connect Straight Hosebarbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic housing with cast aluminum motor housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 9.41 inches L x 3.9 inches W x 4.23 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 671880841863\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat flow rate and pressure does the Jabsco Q401J-115S-3A pump deliver?\u003c\/strong\u003e The Jabsco Par-Max HD4 Q401J-115S-3A delivers 4 GPM (15 LPM) of open flow at up to 40 PSI, running on a 12 volt DC supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump self-priming?\u003c\/strong\u003e Yes, the Q401J-115S-3A is self-priming, which simplifies installation since the line does not need to be manually primed before startup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the pump run dry without being damaged?\u003c\/strong\u003e Yes, the Jabsco Par-Max HD4 Q401J-115S-3A can run dry without damage to the unit, protecting the system if the freshwater tank runs empty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pump cycle on automatically when a faucet is opened?\u003c\/strong\u003e On-demand operation is handled by an integrated, sealed pressure switch built into the Q401J-115S-3A, so the pump starts automatically when pressure drops and shuts off once it is satisfied.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fittings are included with this pump?\u003c\/strong\u003e The Q401J-115S-3A comes equipped with an inline 40 mesh quick-connect strainer and two 1\/2 inch quick-connect straight hosebarb fittings for connecting to existing plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the Jabsco HD4 Par-Max pump?\u003c\/strong\u003e The pump measures 9.41 inches long by 3.9 inches wide by 4.23 inches high and weighs 7.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing made of?\u003c\/strong\u003e The Q401J-115S-3A has a black plastic housing paired with a cast aluminum motor housing for durability under sustained pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the HD4 differ from Jabsco's standard Par-Max pumps?\u003c\/strong\u003e The HD4 designation on the Q401J-115S-3A means a heavier duty motor in a cast aluminum housing plus an integrated bypass module that reduces cycling and smooths flow, compared to Jabsco's standard-duty Par-Max models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the pump noisy when running?\u003c\/strong\u003e No, the Q401J-115S-3A uses dampening feet under the pump body to reduce vibration and keep operation quiet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this pump?\u003c\/strong\u003e The Jabsco Q401J-115S-3A is backed by a 1-year manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the inline strainer protect against?\u003c\/strong\u003e The included 40 mesh quick-connect strainer on the Q401J-115S-3A filters debris out of the water supply before it reaches the diaphragm, protecting the pump from clogging or damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a 12V or 24V pump?\u003c\/strong\u003e The Q401J-115S-3A is a 12 volt DC pump.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028223729883,"sku":"ITT-Q401J-115S-3A","price":215.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Jabsco_ParMax_HD4_40PSI_Freshwater_Pump__03335.1722502644.500.750.jpg?v=1785164592"},{"product_id":"jabsco-par-max-hd4-freshwater-pump-12v-4-gpm-60-psi-q401j-118s-3a","title":"Jabsco Par-Max HD4 Freshwater Pump, 12V, 4 GPM, 60 PSI, Q401J-118S-3A","description":"\u003cp\u003eThe Jabsco Par-Max HD4 Freshwater Pump (Q401J-118S-3A) is a 12V diaphragm pump built to deliver an onboard freshwater system that works as easily as a household tap. A pressure-controlled diaphragm design keeps water flowing on demand at 4 GPM (15 LPM) with a 60 PSI shut-off, and an integrated, sealed pressure switch starts and stops the pump automatically as fixtures are opened and closed. The heavy duty motor is cast in aluminum housing for a long working life under sustained high pressure, and an integrated bypass module reduces cycling while smoothing out flow at the tap. Dampening feet under the motor cut vibration for quiet running, and the pump is self-priming and can run dry without damage to the unit, so accidental tank-out situations will not harm the system.\u003c\/p\u003e\u003cp\u003eInstallation and servicing are simplified with quick-connect ports throughout: the pump comes equipped with an in-line quick-connect 40 mesh strainer to protect the diaphragm from debris and two 1\/2 inch quick-connect straight hosebarb fittings for plumbing into new or existing freshwater lines. It is suited to boats, RVs, and other vessels that need a reliable, quiet, on-demand freshwater supply.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e Q401J-118S-3A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Diaphragm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 4 GPM (15 LPM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Pressure:\u003c\/strong\u003e 60 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrainer:\u003c\/strong\u003e Inline 40 Mesh, Quick Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHosebarb Fittings:\u003c\/strong\u003e 2 x 1\/2 inch, Quick Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Housing Material:\u003c\/strong\u003e Cast Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 15.5 inches L x 6 inches W x 5.5 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 671880841870\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Jabsco Q401J-118S-3A used for?\u003c\/strong\u003e The Q401J-118S-3A is a 12V Jabsco Par-Max HD4 freshwater pump that supplies pressurized freshwater to onboard taps, showers, and fixtures on boats and similar vessels, delivering 4 GPM at up to 60 PSI before its pressure switch shuts it off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Par-Max HD4 pump self-priming?\u003c\/strong\u003e Yes, the Q401J-118S-3A is self-priming and is also able to run dry without damage to the unit, so a temporarily empty tank will not harm the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this Jabsco freshwater pump run on?\u003c\/strong\u003e This pump runs on 12V DC, matching a standard marine 12-volt house battery system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat flow rate and pressure does the Q401J-118S-3A deliver?\u003c\/strong\u003e It delivers an open flow of 4 GPM (15 LPM) and shuts off at 60 PSI once system pressure is reached, thanks to its integrated, sealed pressure switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fittings are included with this pump?\u003c\/strong\u003e The Q401J-118S-3A comes with an in-line quick-connect 40 mesh strainer and two 1\/2 inch quick-connect straight hosebarb fittings for plumbing into a freshwater line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this freshwater pump?\u003c\/strong\u003e The Jabsco Par-Max HD4 pump (Q401J-118S-3A) measures 15.5 inches long by 6 inches wide by 5.5 inches high and weighs 7.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the motor housing made of?\u003c\/strong\u003e The Q401J-118S-3A uses a heavy duty motor cast in aluminum housing, chosen for a long working life under sustained high pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pump run quietly?\u003c\/strong\u003e Yes, the Par-Max HD4 uses dampening mounting feet to reduce vibration, giving it quieter operation than pumps without vibration damping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the HD4 differ from Jabsco's standard Par-Max pumps?\u003c\/strong\u003e The HD (Heavy Duty) line, which includes the Q401J-118S-3A, uses a wider diameter motor with a cast aluminum housing for higher pressure capability and longer life, while Jabsco's standard Par-Max models use a plastic housing and are sized for 1-3 GPM, economical setups with fewer outlets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Q401J-118S-3A cycle on and off smoothly when a tap is opened partway?\u003c\/strong\u003e Yes, this pump has an integrated bypass module that reduces cycling and provides smoother flow at the fixture, in addition to its on-demand pressure switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the warranty on this Jabsco pump?\u003c\/strong\u003e The Q401J-118S-3A Jabsco Par-Max HD4 pump carries a 1-year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this pump work if the water tank runs empty?\u003c\/strong\u003e Yes, the Q401J-118S-3A can run dry without sustaining damage, a feature built into its self-priming design.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028223795419,"sku":"ITT-Q401J-118S-3A","price":215.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Jabsco_ParMax_4GPM_60PSI_Fresh_water_Pump__57213.1722479190.500.750.jpg?v=1785164592"},{"product_id":"johnson-pump-viking-power-16-12v-self-priming-waste-water-pump-10-13350-03","title":"Johnson Pump Viking Power 16 12V Self-Priming Waste Water Pump 10-13350-03","description":"\u003cp\u003eThe Johnson Pump Viking Power 16 is a 12-volt, single-chamber diaphragm pump built for pumping waste water, whether installed after the drain outlet in a wastewater system or set up as a bilge pump aboard a leisure craft. The self-priming diaphragm is made of reinforced premium nitrile rubber and can be swapped out without removing the pump from the system, keeping maintenance simple. Non-choke valves mean no in-line filters are required, and the pump can be run dry or handle a mixture of air and water without damage.\u003c\/p\u003e\u003cp\u003eHoused in a glass-fiber reinforced nylon body with nitrile rubber valves, the Viking Power 16 delivers an open flow capacity of 4.2 GPM (4.0 GPM at 0.1 bar) with a max lift and max head of 9.8 feet, and self-primes to a height of 3 meters. A low pulse design and muffled rubber mounting bracket keep operation quiet, and low power consumption makes it easy to run on a 12V system protected by an 8 Amp fuse. It connects using 1 inch and 3\/4 inch KlickTite XL connectors, with a 90 degree option available, and its compact footprint allows installation even in tight spaces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Johnson Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 10-13350-03\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Viking Power 16 Waste Water Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuse Rating:\u003c\/strong\u003e 8 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Nylon, glass-fiber reinforced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Material:\u003c\/strong\u003e Nitrile rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragm Material:\u003c\/strong\u003e Reinforced nitrile rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen Flow Capacity:\u003c\/strong\u003e 4.2 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity at 0.1 bar:\u003c\/strong\u003e 4.0 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Lift:\u003c\/strong\u003e 9.8 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Head:\u003c\/strong\u003e 9.8 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Priming Height:\u003c\/strong\u003e 3 meters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e 1 inch and 3\/4 inch KlickTite XL connectors, 90 degree (optional)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 7.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 8.9 inches \/ 7.1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 4.6 inches \/ 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7330717009007\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Johnson Pump Viking Power 16 used for?\u003c\/strong\u003e The Viking Power 16 (part 10-13350-03) is a 12V diaphragm pump designed to pump waste water, either installed after the drain outlet in a boat's wastewater system or set up as a bilge pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Viking Power 16 run dry without being damaged?\u003c\/strong\u003e Yes, the Johnson Pump Viking Power 16 can be run dry and can also handle a mixture of air and water without difficulty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pump need an in-line filter?\u003c\/strong\u003e No. The Viking Power 16's non-choke valves eliminate the need for in-line filters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the open flow capacity of the 10-13350-03 pump?\u003c\/strong\u003e The Johnson Pump 10-13350-03 has an open flow capacity of 4.2 GPM, dropping to 4.0 GPM at 0.1 bar of back pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow high can this pump self-prime?\u003c\/strong\u003e The Viking Power 16 self-primes to a height of 3 meters, with a max lift and max head of 9.8 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Viking Power 16 run on?\u003c\/strong\u003e It is a 12V DC pump protected by an 8 Amp fuse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the diaphragm, body, and valves made of?\u003c\/strong\u003e The Viking Power 16 has a glass-fiber reinforced nylon body, nitrile rubber valves, and a reinforced nitrile rubber diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the diaphragm be replaced without removing the whole pump?\u003c\/strong\u003e Yes, the self-priming diaphragm on the Johnson Pump Viking Power 16 is designed to be replaced without removing the pump from the system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose connections does the 10-13350-03 use?\u003c\/strong\u003e The Viking Power 16 connects using 1 inch and 3\/4 inch KlickTite XL connectors, with a 90 degree connector option available.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Viking Power 16 weigh?\u003c\/strong\u003e The Johnson Pump Viking Power 16 (10-13350-03) weighs 6.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Viking Power 16 a quiet pump?\u003c\/strong\u003e Yes, a low pulse design and muffled rubber mounting bracket give the Viking Power 16 quiet operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Viking Power 16?\u003c\/strong\u003e The pump measures 7.3 inches long, 8.9\/7.1 inches wide, and 4.6\/8 inches high.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":49028225958107,"sku":"JON-10-13350-03","price":266.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/JON-10-13350-03__50047.1739466568.500.750.jpg?v=1785164632"},{"product_id":"johnson-pump-macerator-pump-ta3p10-19-12v-dc-10-gpm-model-10-24453-01","title":"Johnson Pump Macerator Pump TA3P10-19, 12V DC, 10 GPM - Model 10-24453-01","description":"\u003cp\u003eThe Johnson Pump Macerator Pump, model TA3P10-19 (part number 10-24453-01), is a 12V DC macerator designed to handle marine toilet and holding tank waste. A rotary cutter inside the pump shreds solid waste before it is pumped into or out of the holding tank, allowing the waste to pass through smaller-diameter hose runs than would otherwise be possible. For best performance, mount the pump as close as possible to the holding tank discharge outlet or the toilet bowl discharge outlet, minimizing the length of unmacerated waste line.\u003c\/p\u003e\u003cp\u003eConstruction pairs a Phenol Plastic (PF) pump body with a Thermoplastic Polyester (PET) housing, a Nitrile impeller (09-1052S-9), a stainless steel shaft, and a lip seal, giving the pump the chemical resistance and durability needed for continuous holding-tank service. The pump moves up to 10 GPM at 0.2 bar and draws 15 amps on a 20 amp fuse, wired to a 12V DC system. Plumbing connects via a 1-1\/2 inch hose or 1-1\/2 inch BSP inlet and a 1 inch hose outlet, matching common marine sanitation hose sizing. The compact housing measures 9.06 inches long, 4.25 inches wide, and 3.23 inches tall, and the complete unit weighs 4.8 pounds, making it straightforward to fit into tight lazarette or head compartments on boats and RVs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Johnson Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 10-24453-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e TA3P10-19\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Phenol Plastic (PF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller Material:\u003c\/strong\u003e Nitrile (09-1052S-9)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Thermoplastic Polyester (PET)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal Type:\u003c\/strong\u003e Lip Seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity at 0.2 bar:\u003c\/strong\u003e 10 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Connection:\u003c\/strong\u003e 1-1\/2 inch hose or 1-1\/2 inch BSP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Connection:\u003c\/strong\u003e 1 inch hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 15 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuse Size:\u003c\/strong\u003e 20 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 9.06 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 4.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 3.23 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Johnson Pump macerator pump 10-24453-01 do?\u003c\/strong\u003e It shreds toilet and holding tank waste with an internal rotary cutter before pumping it into or out of the holding tank, at a capacity of up to 10 GPM at 0.2 bar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should the TA3P10-19 macerator pump be mounted?\u003c\/strong\u003e As close as possible to the holding tank discharge outlet or the bowl discharge outlet, so waste travels the shortest distance before being macerated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this macerator pump require?\u003c\/strong\u003e The Johnson Pump 10-24453-01 runs on a 12V DC system and draws 15 amps, so it should be wired with a 20 amp fuse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose fits the inlet and outlet?\u003c\/strong\u003e The inlet accepts 1-1\/2 inch hose or a 1-1\/2 inch BSP fitting, while the outlet is sized for 1 inch hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Johnson Pump 10-24453-01 weigh?\u003c\/strong\u003e This macerator pump weighs 4.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the TA3P10-19 macerator pump?\u003c\/strong\u003e It measures 9.06 inches long, 4.25 inches wide, and 3.23 inches tall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials is the macerator pump made from?\u003c\/strong\u003e The Johnson Pump 10-24453-01 has a Phenol Plastic (PF) body, a Thermoplastic Polyester (PET) housing, a Nitrile impeller, and a stainless steel shaft, sealed with a lip seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this macerator pump suitable for continuous holding tank use?\u003c\/strong\u003e Yes, the TA3P10-19 is built for holding tank and bowl discharge duty, using corrosion-resistant plastics and a stainless steel shaft for durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat impeller does the 10-24453-01 macerator pump use?\u003c\/strong\u003e It uses a Nitrile impeller, part number 09-1052S-9.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Johnson Pump macerator pump come with any documentation?\u003c\/strong\u003e Yes, the 10-24453-01 macerator pump includes documentation covering installation and use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Johnson Pump TA3P10-19?\u003c\/strong\u003e It delivers up to 10 GPM at 0.2 bar of pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Johnson Pump macerator pump housing?\u003c\/strong\u003e The 10-24453-01 macerator pump has a white housing.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":49028226679003,"sku":"JON-10-24453-01","price":153.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/10-24453-04__32392.1722513827.500.750.jpg?v=1785164645"},{"product_id":"johnson-pump-cm10p7-1-12v-circulation-pump-with-cord-4-gpm-5-8-inch-port","title":"Johnson Pump CM10P7-1 12V Circulation Pump with Cord, 4 GPM, 5\/8 Inch Port","description":"\u003cp\u003eThe Johnson Pump CM10P7-1 is a heavy duty, magnetically driven circulation pump built for continuous-duty water and antifreeze circulation aboard boats. Compact yet powerful, it is ideal for circulating water or antifreeze in heating systems, or for moving cooling fresh water through onboard systems. As a normal-priming centrifugal pump, the CM10P7-1 must be mounted so it stays flooded at all times, or be primed manually before switching on; it is rated for up to 30 minutes of dry running.\u003c\/p\u003e\u003cp\u003eConstruction pairs a PPA thermoplastic pump body and impeller with a stainless steel shaft, an EPDM O-ring, a PSU magnet housing, and an enclosed DC permanent magnet on a ball-bearing-mounted motor designed for continuous operation. It is suitable for fresh water, salt water, and water\/glycol mixtures up to 60 percent glycol. The pump runs on 12V DC power, draws 14 watts maximum, and delivers 4 GPM capacity through a 5\/8 inch or 3\/4 inch hose port. It ships with a flexible cord and mounts to a separate universal bracket for flat surfaces, sold apart from the pump body.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Johnson Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 10-24486-03\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Circulation Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Body Material:\u003c\/strong\u003e PPA Thermoplastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller Material:\u003c\/strong\u003e PPA Thermoplastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-Ring Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Housing Material:\u003c\/strong\u003e PSU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Size:\u003c\/strong\u003e 5\/8 inch or 3\/4 inch hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 4 gallons per minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Power:\u003c\/strong\u003e 14 watts max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Pressure:\u003c\/strong\u003e 2.5 bar max (36 psi)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Liquid Temperature:\u003c\/strong\u003e -40 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Liquid Temperature:\u003c\/strong\u003e 212 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Running:\u003c\/strong\u003e 30 minutes max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Separate universal bracket for flat surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6.97 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2.68 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 3.35 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.6 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Johnson Pump CM10P7-1?\u003c\/strong\u003e The CM10P7-1 delivers a capacity of 4 gallons per minute at a maximum system pressure of 2.5 bar (36 psi).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the CM10P7-1 circulation pump run on?\u003c\/strong\u003e It runs on 12V DC power and draws 14 watts maximum, making it suitable for standard marine 12V electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this pump handle antifreeze as well as water?\u003c\/strong\u003e Yes. The Johnson Pump CM10P7-1 is rated for fresh water, salt water, and water\/glycol antifreeze mixtures up to 60 percent glycol.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose connects to the CM10P7-1?\u003c\/strong\u003e The port accepts either 5\/8 inch or 3\/4 inch hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long can the pump run dry without damage?\u003c\/strong\u003e The CM10P7-1 can run dry for up to 30 minutes maximum; beyond that it should be flooded or primed to avoid damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the pump need to be primed before use?\u003c\/strong\u003e As a normal-priming centrifugal pump, the CM10P7-1 should be mounted so it stays flooded at all times, or be primed manually before switching it on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials is the CM10P7-1 made from?\u003c\/strong\u003e The pump body and impeller are PPA thermoplastic, the shaft is stainless steel, the O-ring is EPDM, and the magnet housing is PSU thermoplastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the operating temperature range for this pump?\u003c\/strong\u003e The Johnson Pump CM10P7-1 is rated from a minimum liquid temperature of -40 degrees F to a maximum of 212 degrees F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CM10P7-1 come with a mounting bracket?\u003c\/strong\u003e It mounts using a separate universal bracket designed for flat surfaces; the bracket is a separate component from the pump itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of this pump?\u003c\/strong\u003e The CM10P7-1 measures 6.97 inches long, 2.68 inches wide, and 3.35 inches high, and weighs 1.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the pump include a power cord?\u003c\/strong\u003e Yes, the Johnson Pump CM10P7-1 is supplied with a flexible cord.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a typical use for this circulation pump?\u003c\/strong\u003e It is commonly used to circulate water or antifreeze in onboard heating systems, or to circulate cooling fresh water through marine systems.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":49028226711771,"sku":"JON-10-24486-03","price":161.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/JON-10-24486-03__34663.1722360426.500.750.jpg?v=1785164645"},{"product_id":"johnson-pump-cm30p7-1-12v-circulation-pump-5-8-3-4-inch-port-5-3-gpm-part-10-24488-03","title":"Johnson Pump CM30P7-1 12V Circulation Pump, 5\/8-3\/4 Inch Port, 5.3 GPM, Part 10-24488-03","description":"\u003cp\u003eThe Johnson Pump CM30P7-1 (part number 10-24488-03) is a heavy duty, magnetically driven circulation pump built for continuous-duty water and antifreeze circulation aboard boats. It is a compact but powerful unit sized for demanding circulation tasks such as moving water or antifreeze through heating systems, or circulating cooling fresh water. As a normal-priming centrifugal pump, the CM30P7-1 must be mounted so it stays flooded at all times, or it should be primed before switching on.\u003c\/p\u003e\u003cp\u003eConstruction pairs a PPA thermoplastic pump body with a PPA thermoplastic impeller and a stainless steel shaft, giving the pump corrosion resistance suited to marine environments. It ships with a flexible power cord and mounts using a separate universal bracket for flat surfaces. The pump draws 12 volts DC and up to 27 watts of input power, moving up to 5.3 gallons per minute against a maximum system pressure of 2.5 bar (36 psi). It connects to either 5\/8 inch or 3\/4 inch hose and is rated for dry running up to 30 minutes maximum. Liquid temperature range runs from -40 degrees F to 212 degrees F maximum.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Johnson Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 10-24488-03\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e CM30P7-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7330717007058\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Power:\u003c\/strong\u003e 27 watts maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 5.3 gallons per minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Size:\u003c\/strong\u003e 5\/8 inch or 3\/4 inch hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Pressure:\u003c\/strong\u003e 2.5 bar maximum (36 psi)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Liquid Temperature:\u003c\/strong\u003e -40 degrees Fahrenheit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Liquid Temperature:\u003c\/strong\u003e 212 degrees Fahrenheit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Running:\u003c\/strong\u003e 30 minutes maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6.97 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2.68 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 3.35 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Body Material:\u003c\/strong\u003e PPA thermoplastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller Material:\u003c\/strong\u003e PPA thermoplastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Separate universal bracket for flat surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Cord:\u003c\/strong\u003e Included, flexible cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Johnson Pump CM30P7-1 used for?\u003c\/strong\u003e The CM30P7-1 (part 10-24488-03) is a magnetically driven circulation pump used to circulate water or antifreeze through onboard heating systems, or to circulate cooling fresh water on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does part 10-24488-03 run on?\u003c\/strong\u003e This Johnson Pump circulation pump runs on 12 volts DC and draws up to 27 watts of input power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much water can the CM30P7-1 pump move?\u003c\/strong\u003e Up to 5.3 gallons per minute, with a maximum system pressure of 2.5 bar (36 psi).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does this pump connect to?\u003c\/strong\u003e The Johnson Pump 10-24488-03 connects to either 5\/8 inch or 3\/4 inch hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the CM30P7-1?\u003c\/strong\u003e The pump measures 6.97 inches long, 2.68 inches wide, and 3.35 inches high, and weighs 1.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CM30P7-1 pump body and impeller made of?\u003c\/strong\u003e Part 10-24488-03 has a PPA thermoplastic pump body and PPA thermoplastic impeller, with a stainless steel shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Johnson Pump CM30P7-1 mounted?\u003c\/strong\u003e It mounts to a flat surface using a separate universal mounting bracket, and includes a flexible power cord.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the CM30P7-1 run dry?\u003c\/strong\u003e It is rated for dry running up to 30 minutes maximum; for continuous use it should be mounted so it stays flooded, or primed before switching on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can this pump handle?\u003c\/strong\u003e The Johnson Pump 10-24488-03 is rated for liquid temperatures from -40 degrees Fahrenheit to a maximum of 212 degrees Fahrenheit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CM30P7-1 a self-priming pump?\u003c\/strong\u003e No, the CM30P7-1 is a normal-priming centrifugal pump, meaning it must be mounted flooded at all times or primed manually before it is switched on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the CM30P7-1 differ from the CM10P7-1?\u003c\/strong\u003e The CM30P7-1 (10-24488-03) draws up to 27 watts and moves up to 5.3 GPM, while the lower-output Johnson Pump CM10P7-1 draws up to 14 watts and moves up to 4 GPM; both share the same 6.97 inch by 2.68 inch by 3.35 inch body size and 5\/8 or 3\/4 inch port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CM30P7-1 come with a power cord?\u003c\/strong\u003e Yes, the Johnson Pump 10-24488-03 ships with a flexible cord attached.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":49028226777307,"sku":"JON-10-24488-03","price":161.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/JON-10-24488-03__31754.1722353975.500.750.jpg?v=1785164645"},{"product_id":"johnson-pump-cm10p7-1-12v-marine-circulation-pump-4-gpm-part-10-24501-03","title":"Johnson Pump CM10P7-1 12V Marine Circulation Pump, 4 GPM, Part 10-24501-03","description":"\u003cp\u003eThe Johnson Pump CM10P7-1 is a heavy duty, magnetically driven circulation pump built for continuous-duty water and antifreeze circulation aboard boats and RVs. Compact but powerful, it is designed for circulation duties such as moving water or antifreeze through heating systems, or circulating cooling fresh water in closed-loop systems. As a normal-priming centrifugal pump, the CM10P7-1 must be mounted so it is always flooded, or primed before switching on, for reliable operation.\u003c\/p\u003e\u003cp\u003eConstruction pairs a PPA thermoplastic pump body and impeller with a stainless steel shaft for corrosion resistance and long service life in wet, marine environments. The pump runs on 12 volts, draws 14 watts of input power, and delivers 4 GPM of flow against a maximum system pressure of 2.5 bar (36 psi). It accepts either 5\/8 inch or 3\/4 inch hose at the port and mounts to a separate universal bracket for flat surfaces, keeping installation flexible across different equipment layouts. The pump tolerates liquid temperatures from -40 degrees F up to 212 degrees F, and can run dry for up to 30 minutes without damage, adding a margin of safety if the system briefly loses prime.\u003c\/p\u003e\u003cp\u003eCompact dimensions of 6.97 inches long, 2.68 inches wide, and 3.35 inches high let the CM10P7-1 fit into tight equipment spaces typical of marine heating and cooling installations.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Johnson Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 10-24501-03\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e CM10P7-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Size:\u003c\/strong\u003e 5\/8 inch or 3\/4 inch hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 4 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Power:\u003c\/strong\u003e 14 Watts Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Liquid Temperature:\u003c\/strong\u003e -40 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Liquid Temperature:\u003c\/strong\u003e 212 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Running:\u003c\/strong\u003e 30 minutes max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Pressure:\u003c\/strong\u003e 2.5 bar max (36 psi)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6.97 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2.68 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 3.35 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Body Material:\u003c\/strong\u003e PPA, Thermoplastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller Material:\u003c\/strong\u003e PPA, Thermoplastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Separate universal bracket for flat surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7330717000585\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal-mount circulation pump for water and antifreeze heating\/cooling circuits; it is not tied to a specific engine or vessel model, and mounts via a separate universal bracket to flat surfaces.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are published for this part number.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Johnson Pump CM10P7-1 used for?\u003c\/strong\u003e The CM10P7-1 (part 10-24501-03) is a magnetically driven circulation pump used to move water or antifreeze through heating systems, or to circulate cooling fresh water in a closed-loop system on a boat or RV.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pump run on 12 volts or 24 volts?\u003c\/strong\u003e The CM10P7-1, part 10-24501-03, is a 12 volt pump drawing up to 14 watts of input power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much flow does the CM10P7-1 produce?\u003c\/strong\u003e This pump delivers a capacity of 4 GPM against a maximum system pressure of 2.5 bar (36 psi).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose sizes fit the port on this pump?\u003c\/strong\u003e The 10-24501-03 accepts either 5\/8 inch or 3\/4 inch hose at its port connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the pump run dry without being damaged?\u003c\/strong\u003e Yes, the CM10P7-1 is rated to run dry for up to 30 minutes maximum, which provides a safety margin if the circuit briefly loses prime.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pump need to be self-priming?\u003c\/strong\u003e No, the CM10P7-1 is a normal-priming centrifugal pump, so it must be mounted so it stays flooded at all times, or be manually primed before it is switched on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials are the pump body and impeller made from?\u003c\/strong\u003e The pump body and impeller on the Johnson Pump 10-24501-03 are made from PPA thermoplastic, while the shaft is stainless steel for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the operating temperature range of this pump?\u003c\/strong\u003e The CM10P7-1 handles liquid temperatures from -40 degrees F up to 212 degrees F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the CM10P7-1 mounted?\u003c\/strong\u003e This pump mounts using a separate universal bracket designed for flat surfaces, giving flexibility in installation location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the physical dimensions of this pump?\u003c\/strong\u003e The 10-24501-03 measures 6.97 inches in length, 2.68 inches in width, and 3.35 inches in height, and weighs 1.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CM10P7-1 the same as the higher-output CM30P7-1?\u003c\/strong\u003e No, the CM10P7-1 (10-24501-03) is rated at 4 GPM and 14 watts, while the CM30P7-1 is a higher-output version of the Johnson Pump CM series rated at 5.3 GPM and 27 watts for larger circulation needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there OEM cross-reference numbers for this part?\u003c\/strong\u003e No OEM replacement or cross-reference numbers are published for the Johnson Pump 10-24501-03 CM10P7-1.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":49028226810075,"sku":"JON-10-24501-03","price":161.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/JON-10-24501-03__02866.1722504254.500.750.jpg?v=1785164645"},{"product_id":"johnson-pump-cm30p7-1-12v-circulation-pump-5-3-gpm","title":"Johnson Pump CM30P7-1 12V Circulation Pump, 5.3 GPM","description":"\u003cp\u003eThe Johnson Pump CM30P7-1 is a heavy duty, magnetically driven circulation pump built for demanding onboard fluid-circulation duties. Compact but powerful, it is designed for circulating water or antifreeze in heating systems, or for moving cooling fresh water through a system loop. The CM30P7-1 is a normal-priming centrifugal pump, so it must be mounted where it stays flooded at all times, or be primed manually before each startup.\u003c\/p\u003e\u003cp\u003eConstruction pairs a PPA thermoplastic pump body and impeller with a stainless steel shaft for corrosion resistance in a marine environment. The pump runs on 12V power, draws up to 27W, and moves up to 5.3 GPM against a maximum system pressure of 2.5 bar (36 psi). It accepts either 5\/8 inch or 3\/4 inch hose at the port, and is rated to operate across a liquid temperature range of -40 F to 212 F. The pump can run dry for up to 30 minutes maximum without damage, and mounts using a separate universal bracket suited to flat surfaces.\u003c\/p\u003e\u003cp\u003eCompact overall dimensions of 6.97 inches long, 2.68 inches wide, and 3.35 inches high allow the CM30P7-1 to fit into tight engine room or utility spaces where a dependable, higher-output circulation pump is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Johnson Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 10-24504-03\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Circulation Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 5.3 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Power:\u003c\/strong\u003e 27W max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Size:\u003c\/strong\u003e 5\/8 inch or 3\/4 inch hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Pressure:\u003c\/strong\u003e 2.5 bar max (36 psi)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Liquid Temperature:\u003c\/strong\u003e -40 F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Liquid Temperature:\u003c\/strong\u003e 212 F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Running:\u003c\/strong\u003e 30 minutes max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Separate universal bracket for flat surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6.97 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2.68 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 3.35 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Body Material:\u003c\/strong\u003e PPA thermoplastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller Material:\u003c\/strong\u003e PPA thermoplastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7330717000622\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Johnson Pump CM30P7-1 used for?\u003c\/strong\u003e The CM30P7-1 is a magnetically driven circulation pump used to move water or antifreeze through onboard heating systems, or to circulate cooling fresh water through a system loop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CM30P7-1 need to be primed before use?\u003c\/strong\u003e Yes. The CM30P7-1 is a normal-priming centrifugal pump, so it must be mounted where it stays flooded at all times, or be manually primed before each startup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this pump run on?\u003c\/strong\u003e The Johnson Pump CM30P7-1 operates on 12V and draws up to 27W maximum input power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much flow does the CM30P7-1 provide?\u003c\/strong\u003e It delivers up to 5.3 GPM against a maximum system pressure of 2.5 bar (36 psi).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size fits this pump?\u003c\/strong\u003e The CM30P7-1 accepts either 5\/8 inch or 3\/4 inch hose at its port connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the CM30P7-1 run dry?\u003c\/strong\u003e It can run dry for up to 30 minutes maximum without being damaged, but it is not designed for continuous dry operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CM30P7-1 made of?\u003c\/strong\u003e Its pump body and impeller are PPA thermoplastic, and the shaft is stainless steel, for corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the CM30P7-1 mounted?\u003c\/strong\u003e This pump mounts to flat surfaces using a separate universal mounting bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the CM30P7-1?\u003c\/strong\u003e The Johnson Pump CM30P7-1 measures 6.97 inches long, 2.68 inches wide, and 3.35 inches high, and weighs 1.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can this pump handle?\u003c\/strong\u003e The CM30P7-1 is rated for liquid temperatures from -40 F minimum to 212 F maximum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CM30P7-1 genuine Johnson Pump equipment?\u003c\/strong\u003e Yes, part number 10-24504-03 is a genuine Johnson Pump CM30P7-1 circulation pump, not an aftermarket reproduction.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":49028226842843,"sku":"JON-10-24504-03","price":161.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/JON-10-24504-03__96715.1722495096.500.750.jpg?v=1785164645"},{"product_id":"johnson-pump-talulah-ballast-pump-13-5-gpm-12v-dc-model-10-24690-18","title":"Johnson Pump Talulah Ballast Pump, 13.5 GPM, 12V DC, Model 10-24690-18","description":"\u003cp\u003eThe Johnson Pump Talulah Ballast Pump (model 10-24690-18) is a 13.5 GPM electric ballast pump built to quickly fill or, when reversed, drain a boat's ballast tank. Rated for continuous duty, it pumps both fresh and sea water and is designed for wake and watersport boats that need reliable, repeatable ballast cycling. The pump is self-priming, so it does not require manual priming before each use, and it draws less battery current than comparable pumps of its class, helping preserve onboard power for other systems.\u003c\/p\u003e\u003cp\u003eInside, the Talulah pump uses a ball bearing design with a bronze head for durability under repeated wet\/dry cycling, and a thermal overload feature protects the motor if the pump is run dry. It is built as a Retrofit Ready unit, meaning it is sized and configured to be installed into existing wake and watersport boats that have approved electrical and plumbing specifications already in place. The pump offers versatile high volume connection options, with an external 1 inch standard hose connection and an internal 1\/2 inch NPT female port, and it is compatible with tank monitoring systems for overfill protection and dry-run protection while emptying.\u003c\/p\u003e\u003cp\u003eThe Johnson Pump Talulah Ballast Pump is finished in black plastic housing and carries a 3 year warranty. It complies with USCG 183.410 and ISO 8846 ignition protection standards for marine electrical equipment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Johnson Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 10-24690-18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 13.5 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 13.6 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e External 1 inch standard hose, internal 1\/2 inch NPT (female)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Hose Size:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Size:\u003c\/strong\u003e Minimum 12 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuse Size:\u003c\/strong\u003e 25 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmp Draw (Pumping):\u003c\/strong\u003e 14 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmp Draw (Reversal):\u003c\/strong\u003e Up to 18 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller Kit:\u003c\/strong\u003e 09-824P-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 8 inches L x 4.72 inches W x 3.54 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.425 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic housing with bronze pump head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Submersible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 Year Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e USCG 183.410 and ISO 8846 (Ignition Protection)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Johnson Pump Talulah Ballast Pump?\u003c\/strong\u003e The Johnson Pump Talulah Ballast Pump (10-24690-18) has a rated flow of 13.5 GPM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this pump both fill and drain a ballast tank?\u003c\/strong\u003e Yes. Model 10-24690-18 fills the ballast tank in normal operation and, when reversed, drains it as well.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 10-24690-18 ballast pump run on?\u003c\/strong\u003e It is a 12V DC pump with an operating voltage of 13.6 VDC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much current does the pump draw?\u003c\/strong\u003e The Talulah Ballast Pump draws about 14 A while pumping and up to 18 A during reversal, so a minimum 12 AWG wire and a 25 A fuse are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose connections does this pump use?\u003c\/strong\u003e The 10-24690-18 has an external 1 inch standard hose connection and an internal 1\/2 inch NPT female port, with a minimum hose size of 1 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Johnson Pump Talulah pump self-priming?\u003c\/strong\u003e Yes, the Talulah Ballast Pump is self-priming and does not need to be manually primed before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens if the pump runs dry?\u003c\/strong\u003e Model 10-24690-18 includes thermal overload motor protection that guards the motor during dry-run conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of this ballast pump?\u003c\/strong\u003e The Johnson Pump Talulah Ballast Pump measures 8 inches L x 4.72 inches W x 3.54 inches H and weighs 7.425 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pump body made of?\u003c\/strong\u003e The 10-24690-18 has a plastic housing with a bronze pump head as part of its ball bearing design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump compatible with fresh and salt water?\u003c\/strong\u003e Yes, the Talulah Ballast Pump is capable of pumping both fresh and sea water for continuous duty use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pump work with ballast tank monitoring systems?\u003c\/strong\u003e Yes, the 10-24690-18 is designed for use with tank monitoring systems that provide overfill and dry-run protection while emptying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat impeller kit does this pump use?\u003c\/strong\u003e The Johnson Pump Talulah Ballast Pump uses impeller kit 09-824P-2.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":49028226908379,"sku":"JON-10-24690-18","price":292.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/10-24690__62390.1722498619.500.750.jpg?v=1785164645"},{"product_id":"whale-marine-bp4572-gulper-grouper-12v-fishbox-waste-pump-macerator-pump-replacement","title":"Whale Marine BP4572 Gulper Grouper 12V Fishbox Waste Pump, Macerator Pump Replacement","description":"\u003cp\u003eThe Whale Marine BP4572 Gulper Grouper is a 12V remote-mount waste pump built to empty fishboxes, livewells, and baitwells without the clogging and burnout problems common to macerator pumps. Instead of a spinning impeller and cutting blades, the Gulper Grouper uses diaphragm pump technology with non-choke valves, so there is no impeller to jam or burn and no filter to clean out. The pump moves up to 6.75 US gallons (25.5 liters) per minute and can run dry without damage, making it a durable choice for boats that need reliable fishbox drainage over many seasons.\u003c\/p\u003e\u003cp\u003eA 360 degree multi-directional head lets the BP4572 be mounted almost anywhere space allows, and its dual 1 inch \/ 1-1\/2 inch hose connections match standard fishbox and bilge plumbing without needing an adapter. Because a single Gulper Grouper can be plumbed to serve multiple wells, one pump can do the job that would otherwise require a separate macerator on each well, cutting both installation time and cost. The pump runs on 12 volts DC, draws a modest 5 amp dry-running current, and is protected by a recommended 10 amp automotive fuse, so it is easy on the battery bank. Housed in aluminum, corrosion-resistant steel and brass, and glass-filled nylon, the BP4572 is built to hold up in the marine environment while staying easy to maintain.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Whale Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e BP4572\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Fuse Size:\u003c\/strong\u003e 10 Amp automotive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Wire Size:\u003c\/strong\u003e 16 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 6.75 US Gallons (25.5 Liters) per minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Suction Lift:\u003c\/strong\u003e 1.7 feet (0.5 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Discharge Head:\u003c\/strong\u003e 10 feet (3 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Running Current:\u003c\/strong\u003e 5 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Connections:\u003c\/strong\u003e 1 inch \/ 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Rotation:\u003c\/strong\u003e 360 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum, corrosion-resistant steel and brass, glass-filled nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\/Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 11.31 inches L x 11.22 inches W x 4.63 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Year Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Gulper IC Pump Unit, Sensor\/Strainer, NRV (Non Return Valve), Straight Inlet\/Outlet, Fuse, Fixing Kit, Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Whale Marine BP4572 Gulper Grouper used for?\u003c\/strong\u003e The BP4572 Gulper Grouper is a 12V remote-mount waste pump designed to empty fishboxes, livewells, and baitwells, moving up to 6.75 US gallons (25.5 liters) per minute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Gulper Grouper BP4572 replace a macerator pump?\u003c\/strong\u003e Yes, the BP4572 is designed as an alternative to macerator pumps, using diaphragm pump technology with no impeller to clog, jam, or burn out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose sizes does the BP4572 use?\u003c\/strong\u003e 1 inch and 1-1\/2 inch hose connections are both supported on the Whale Marine BP4572, matching standard fishbox and bilge plumbing without needing an adapter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Whale Marine BP4572 weigh?\u003c\/strong\u003e 4.9 pounds is the weight of the Whale Marine BP4572 Gulper Grouper pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this pump run on?\u003c\/strong\u003e 12 volts DC powers the Whale Marine BP4572, which draws a dry-running current of 5 amps and is protected by a recommended 10 amp automotive fuse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the BP4572 run dry without being damaged?\u003c\/strong\u003e Yes, the Gulper Grouper is built to run dry without damage, giving it long-term durability compared to pumps that fail if they lose prime.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the BP4572?\u003c\/strong\u003e The Whale Marine BP4572 ships with the Gulper IC pump unit, a sensor\/strainer, an NRV (non-return valve), straight inlet\/outlet fittings, a fuse, a fixing kit, and installation instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far can the BP4572 lift or discharge waste water?\u003c\/strong\u003e Maximum suction lift is 1.7 feet (0.5 meters) and maximum discharge head is 10 feet (3 meters) for the Whale Marine BP4572 Gulper Grouper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan one BP4572 pump serve multiple wells?\u003c\/strong\u003e A single Whale Marine BP4572 can be plumbed to serve multiple wells, reducing the need to install a separate pump for each one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the BP4572 pump housing made from?\u003c\/strong\u003e Aluminum, corrosion-resistant steel and brass, and glass-filled nylon make up the housing and hardware of the Whale Marine BP4572.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Gulper Grouper head rotate for tight installations?\u003c\/strong\u003e 360 degree head rotation lets the Whale Marine BP4572 fit into tight or awkward mounting spaces where a fixed-head pump would not.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Whale Marine BP4572?\u003c\/strong\u003e A 2 year warranty covers the Whale Marine BP4572 Gulper Grouper waste pump.\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":49028231004379,"sku":"WHA-BP4572","price":300.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/BP4572__34705.1722370905.500.750.jpg?v=1785165772"},{"product_id":"whale-marine-gulper-220-12v-electric-waste-pump-for-shower-and-graywater-drainage","title":"Whale Marine Gulper 220 12V Electric Waste Pump for Shower and Graywater Drainage","description":"\u003cp\u003eThe Whale Marine Gulper 220 is a 12V electric waste pump built as a remote-mount solution for shower and graywater drainage aboard boats. It uses non-clog electric valve technology paired with an easy-access strainer system, making it purpose-built to handle shower waste such as hair and gel without the fouling that plagues simpler pumps. A large single diaphragm moves up to 3.7 US Gallons (14 Liters) of water per minute, and the pump is self-priming to a lift of up to 10 feet (3 meters), so it can be mounted away from the water source and still draw effectively.\u003c\/p\u003e\u003cp\u003eA double outlet valve keeps flow continuous even when the pump is handling a mixture of air and water, and the Gulper 220 is designed to run dry without sustaining damage, a key advantage over pumps that can burn out when the shower sump runs low. No filter is required, which cuts down on routine maintenance, and the multi-directional head allows the pump to be installed in tight or awkward spaces almost anywhere on the boat. Its compact plastic housing keeps weight low while standing up to the marine environment. The Gulper 220 is a graywater and shower waste solution rather than a macerator or bilge pump, and it ships with the components needed to complete the installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Whale Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e BP1552\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 3.7 US Gallons (14 Liters) per minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Priming Lift:\u003c\/strong\u003e Up to 10 feet (3 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\/Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 10.75 inches L x 6.8 inches W x 4.63 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Connections:\u003c\/strong\u003e 3\/4 inch \/ 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Gulper Pump Unit, Non-Return Valve (NRV), Outlet, Fuse, Fixing Kit, Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal remote-mount installation for shower and graywater drainage systems; not model-specific.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Whale Marine Gulper 220 designed to do?\u003c\/strong\u003e The Gulper 220 is a 12V electric waste pump built to drain shower and graywater sumps, including waste containing hair and gel, without clogging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much water does the Gulper 220 pump per minute?\u003c\/strong\u003e It moves up to 3.7 US Gallons (14 Liters) per minute through its large single diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Gulper 220 need a filter to avoid clogs?\u003c\/strong\u003e No filter is required. The Gulper 220 uses non-clog electric valve technology and a strainer system instead of a filter that would need regular cleaning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the pump run dry without being damaged?\u003c\/strong\u003e Yes, the Gulper 220 is built to run dry without damage and can pump a mixture of air and water thanks to its double outlet valve design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Gulper 220 run on?\u003c\/strong\u003e The pump operates on 12V DC power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far can the Gulper 220 self-prime?\u003c\/strong\u003e Self-priming lift is up to 10 feet (3 meters), which allows the pump to be mounted away from the water source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the Gulper 220?\u003c\/strong\u003e The package includes the Gulper Pump Unit, a Non-Return Valve (NRV), an outlet fitting, a fuse, a fixing kit, and installation instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Gulper 220 suitable for shower waste with hair and gel?\u003c\/strong\u003e Yes, the pump is specifically designed to handle shower waste such as hair and gel without clogging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Gulper 220 mounted?\u003c\/strong\u003e It has a multi-directional head and can be mounted almost anywhere, making installation flexible for tight spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose connection sizes does the Gulper 220 use?\u003c\/strong\u003e The pump has 3\/4 inch and 1 inch hose connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Gulper 220 housing made of?\u003c\/strong\u003e The housing is constructed of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Whale Marine Gulper 220 weigh?\u003c\/strong\u003e The Gulper 220 weighs 3.9 pounds.\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":49028230971611,"sku":"WHA-BP1552","price":221.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/BP1552__02882.1722350284.500.750.jpg?v=1785165772"},{"product_id":"whale-flipper-gp0418-hand-operated-galley-pump-with-swiveling-outlet-for-fresh-and-saltwater","title":"Whale Flipper GP0418 Hand Operated Galley Pump with Swiveling Outlet for Fresh and Saltwater","description":"\u003cp\u003eThe Whale Flipper GP0418 is a hand operated galley pump built for simple, reliable water delivery at the galley sink. It uses a self priming lever action so no manual priming is needed before use, and a light back and forth pumping motion draws water with fine flow control. The outlet swivels, making this pump a good fit for installation between two sinks where a single pump needs to serve both basins. It connects to 1\/2 inch flexible hose for straightforward installation, and the outlet is made from non-corrosive aluminum alloy paired with a durable molded plastic base, so it stands up to both fresh and saltwater galley systems. At a rated flow of 1.85 US gallons (7 liters) per minute, the Flipper delivers enough output for everyday galley tasks like filling a kettle or washing dishes, while its manual operation means it draws no electrical power and keeps working even when the boat's electrical system is off. Whale has designed and manufactured marine pumps since the 1960s, and the Flipper reflects that long running, classic hand pump design: compact, low maintenance, and easy to operate with one hand. It is suitable for both fresh and saltwater use, making it a versatile choice for galley installations on boats where a simple, dependable manual water source is preferred over a pressurized electric system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Whale\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e GP0418\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 1.85 US Gallons (7 Liters) Per Minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Hand Operated, Self Priming Lever Action\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Lifting Height:\u003c\/strong\u003e 3 Feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet:\u003c\/strong\u003e Swiveling, Non-Corrosive Aluminum Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Connection:\u003c\/strong\u003e 1\/2 Inch Flexible Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Compatibility:\u003c\/strong\u003e Fresh and Saltwater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic Base, Aluminum Alloy Outlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 11.81 Inches L x 5.91 Inches W x 4.33 Inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.7 Pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 766478041807\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Whale Flipper GP0418?\u003c\/strong\u003e The Whale Flipper GP0418 is a hand operated galley pump that delivers water using a lever action pumping motion, designed for use at a boat's galley sink.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much water does the GP0418 pump per minute?\u003c\/strong\u003e It delivers up to 1.85 US gallons (7 liters) per minute with a light back and forth pumping action.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Whale Flipper pump be used with both fresh and saltwater?\u003c\/strong\u003e Yes, the GP0418 is suitable for both fresh and saltwater galley systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the GP0418 require priming before use?\u003c\/strong\u003e No, it is a self priming lever operated pump, so it does not need to be manually primed before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Whale Flipper GP0418 connect to?\u003c\/strong\u003e The GP0418 connects to 1\/2 inch flexible hose for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan one Flipper pump serve two sinks?\u003c\/strong\u003e Yes, the outlet on the GP0418 swivels, making it well suited to installation between two sinks so a single pump can serve both.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum lifting height of the GP0418?\u003c\/strong\u003e The Whale Flipper GP0418 has a maximum lifting height of 3 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Whale Flipper galley pump?\u003c\/strong\u003e The GP0418 measures 11.81 inches long by 5.91 inches wide by 4.33 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Whale Flipper GP0418 weigh?\u003c\/strong\u003e It weighs 0.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Whale Flipper GP0418 made from?\u003c\/strong\u003e The GP0418 has a durable molded plastic base with a non-corrosive aluminum alloy outlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Whale Flipper GP0418 require electrical power?\u003c\/strong\u003e No, the GP0418 is fully manual and hand operated, requiring no electrical power to draw water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Whale Flipper GP0418?\u003c\/strong\u003e The GP0418 is finished in white.\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":49028231233755,"sku":"WHA-GP0418","price":117.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/GP0418__11725.1722357524.500.750.jpg?v=1785165774"},{"product_id":"whale-gusher-foot-operated-galley-pump-right-side-foot-lever-4-gpm-gp0550","title":"Whale Gusher Foot Operated Galley Pump, Right-Side Foot Lever, 4 GPM, GP0550","description":"\u003cp\u003eThe Whale Gusher GP0550 is a foot operated galley pump built for delivering fresh or saltwater to a small galley without tying up your hands. A smooth double-action foot pedal drives the pump, so it stays fully hands-free while you cook, clean, or manage other onboard tasks. This unit is the right-side foot lever configuration; a left-hand foot lever version is available as a separate part number for layouts that call for the pump on the opposite side.\u003c\/p\u003e\u003cp\u003eThe GP0550 delivers a maximum flow rate of 4 US gallons (15 liters) per minute, with a maximum suction lift of 7 feet and a maximum discharge head of 10 feet. It is self-priming and can be operated dry without damage, and it also works well as a priming pump for Whale inline impeller electric pumps, giving a manual backup if the electric system loses power. Multi-directional inlet and outlet hose connections and three mounting options, including thru-bulkhead, make it straightforward to fit into tight galley spaces. It connects to Whale Quick Connect 15mm plumbing and 13mm (1\/2 inch) flexible hose.\u003c\/p\u003e\u003cp\u003eConstruction consists of a durable Acetal and nylon pump body, an LM6 aluminum alloy lever, a Nitrile and neoprene diaphragm, and stainless steel fasteners, finished in white. It is rated for both fresh and saltwater use, but it is not designed for use with pressurized water systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Whale\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e GP0550\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Foot Operated Galley Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Foot pedal, hands-free double action\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoot Lever Side:\u003c\/strong\u003e Right side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 4 US gallons (15 liters) per minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Suction Lift:\u003c\/strong\u003e 7 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Discharge Head:\u003c\/strong\u003e 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Options:\u003c\/strong\u003e 3, including thru-bulkhead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Priming:\u003c\/strong\u003e Yes, operates dry without damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Compatibility:\u003c\/strong\u003e Fresh and saltwater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlumbing Connection:\u003c\/strong\u003e Whale Quick Connect 15mm; 13mm (1\/2 inch) flexible hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Body Material:\u003c\/strong\u003e Acetal and nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLever Material:\u003c\/strong\u003e LM6 aluminum alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragm Material:\u003c\/strong\u003e Nitrile and neoprene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5 inches L x 7.75 inches W x 5.13 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressurized System Use:\u003c\/strong\u003e Not for use with pressurized systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Whale Gusher GP0550 a left-side or right-side foot pump?\u003c\/strong\u003e The GP0550 is the right-side foot lever version of the Whale Gusher galley pump; a left-hand foot lever version exists as a separate part number for boats where the layout requires the pump on the opposite side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum flow rate of this galley pump?\u003c\/strong\u003e 4 US gallons (15 liters) per minute is the maximum flow rate delivered by the Whale Gusher GP0550 foot operated galley pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the GP0550 be used with saltwater as well as fresh water?\u003c\/strong\u003e Yes, the Whale Gusher GP0550 is designed to work with both fresh and saltwater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to prime the pump before it will work?\u003c\/strong\u003e No priming is required; the GP0550 is self-priming and can also be operated dry without damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials is the Whale Gusher GP0550 made from?\u003c\/strong\u003e The GP0550 has an Acetal and nylon pump body, an LM6 aluminum alloy lever, a Nitrile and neoprene diaphragm, and stainless steel fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Whale Gusher GP0550 mounted?\u003c\/strong\u003e It supports three mounting options, including a thru-bulkhead installation, and uses multi-directional inlet and outlet hose connections to fit into tight galley spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this pump be used as a backup to an electric water system?\u003c\/strong\u003e Yes, the GP0550 can serve as a priming pump for Whale inline impeller electric pumps, giving a manual backup if the electric pump loses power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose and plumbing sizes does the GP0550 connect to?\u003c\/strong\u003e The Whale Gusher GP0550 connects to Whale Quick Connect 15mm plumbing and 13mm (1\/2 inch) flexible hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the GP0550 suitable for a pressurized water system?\u003c\/strong\u003e No, the Whale Gusher GP0550 is not designed for use with pressurized water systems; it is intended for gravity-fed or manual galley water delivery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the suction lift and discharge head ratings for this pump?\u003c\/strong\u003e The GP0550 has a maximum suction lift of 7 feet and a maximum discharge head of 10 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Whale Gusher GP0550 weigh?\u003c\/strong\u003e The Whale Gusher GP0550 foot operated galley pump weighs 1.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the GP0550 compare to Whale's other galley pumps?\u003c\/strong\u003e The GP0550 Gusher delivers a higher 4 GPM flow rate than the compact Whale Babyfoot foot pump, and it operates by foot pedal rather than the hand-lever action used on the Whale Flipper, which is built for installation between two sinks with a swiveling outlet.\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":49028231266523,"sku":"WHA-GP0550","price":136.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/GP0550__85961.1722509420.500.750.jpg?v=1785165774"},{"product_id":"whale-babyfoot-gp4618-foot-operated-galley-pump-manual-freshwater-pump-with-1-2-inch-hose-connection","title":"Whale Babyfoot GP4618 Foot Operated Galley Pump, Manual Freshwater Pump with 1\/2 Inch Hose Connection","description":"\u003cp\u003eThe Whale Babyfoot GP4618 is a foot operated galley pump built for delivering freshwater by hand pump action in small boat galleys. It is a simple, self-priming design: press down with the bottom of your foot to draw water, with no electrical hookup required. The angled top section is shaped for comfortable, easy operation, and the compact body is designed to install neatly in confined spaces where a full-size pump would not fit.\u003c\/p\u003e\u003cp\u003eWhale has been designing and manufacturing marine water pumps since the 1960s, and the Babyfoot continues that foot-pump design line as a simple, reliable solution for basic freshwater delivery. It connects to 1\/2 inch flexible hose for straightforward plumbing into an existing galley freshwater line, and it is also suited to use as a priming pump ahead of Whale in-line impeller electric pumps. The pump is built from a combination of acetal, neoprene, and nylon components, giving it a durable, corrosion-resistant construction for the marine environment. It delivers a maximum flow rate of 2.2 gallons per minute.\u003c\/p\u003e\u003cp\u003eThis is strictly a freshwater, non-pressurized pump: it is not designed for use with pressurized water systems. It is intended for simple gravity-fed or hand-drawn freshwater delivery in the galley rather than as a shower or washdown pump.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Whale\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e GP4618\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 766478461803\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Foot Operated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Acetal, Neoprene, Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5.5 inches long x 4 inches wide x 2.75 inches high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 2.2 gallons per minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Connection:\u003c\/strong\u003e 1\/2 inch flexible hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Freshwater galley delivery; priming pump for Whale in-line impeller electric pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Recommended For:\u003c\/strong\u003e Pressurized water systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Whale Babyfoot GP4618 used for?\u003c\/strong\u003e The GP4618 is a foot operated galley pump used to deliver freshwater on demand in a boat galley by pressing down with your foot, with no electrical connection needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the GP4618 be used with a pressurized water system?\u003c\/strong\u003e No. The Whale Babyfoot GP4618 is not designed for use with pressurized systems; it is intended for simple, non-pressurized freshwater delivery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the GP4618 work with saltwater?\u003c\/strong\u003e The Whale Babyfoot GP4618 is intended for freshwater galley use rather than saltwater service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the GP4618 connect to?\u003c\/strong\u003e It connects to 1\/2 inch flexible hose for installation into a galley freshwater line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum flow rate of the GP4618 pump?\u003c\/strong\u003e The GP4618 delivers a maximum flow rate of 2.2 gallons per minute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials is the Babyfoot pump made from?\u003c\/strong\u003e The GP4618 is constructed from acetal, neoprene, and nylon components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the GP4618 weigh?\u003c\/strong\u003e The Whale Babyfoot GP4618 weighs 0.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the GP4618 pump?\u003c\/strong\u003e The GP4618 measures 5.5 inches long by 4 inches wide by 2.75 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the GP4618 be used as a priming pump for an electric pump?\u003c\/strong\u003e Yes, the GP4618 is designed to work as a priming pump ahead of Whale in-line impeller electric pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the GP4618 self-priming?\u003c\/strong\u003e Yes, the Whale Babyfoot GP4618 is a self-priming foot pump, making it easy to install and use in a simple freshwater system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the GP4618 pump?\u003c\/strong\u003e The GP4618 is supplied as the complete Babyfoot foot operated pump unit with 1\/2 inch flexible hose connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the GP4618 a genuine Whale product?\u003c\/strong\u003e Yes, the GP4618 is manufactured by Whale, backed by a 5 year warranty.\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":49028231332059,"sku":"WHA-GP4618","price":60.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/GP4618__72623.1722488530.500.750.jpg?v=1785165774"},{"product_id":"trac-69390-macerator-pump-13-gpm-12v-sanitation-waste-pump-replaces-t10069","title":"Trac 69390 Macerator Pump - 13 GPM 12V Sanitation Waste Pump, Replaces T10069","description":"\u003cp\u003eThe Trac 69390 Macerator Pump is built specifically for sanitation waste and fish box evacuations aboard your boat. This high-powered pump pairs a quality motor with a seamless motor tube and O-ring sealed motor end frames for durable, reliable operation. A 13 gallon per minute (49.2 liters per minute) flow rate empties a tank in minutes, while the high-speed rotary cutter shreds waste efficiently for higher discharge capacity.\u003c\/p\u003e\u003cp\u003eThe pump's internal housing design, premium impeller, and heavy-duty armature shaft seal are engineered to hold up to repeated use, and a manual turn key with a rear O-ring seal keeps the unit protected. The Trac 69390 is ignition protected and self-primes up to 5 feet, so it can be mounted away from the tank without losing suction. It runs on 12V DC power and uses a 1.5 inch intake hose. Note that the pump switch should be installed near the pump and tank so the operator can hear it running; when the tank runs empty the pump gets louder with a high pitch sound and should be shut off immediately, and it should never run dry for more than 15 to 20 seconds. The Trac 69390 replaces the older Trac part number T10069 and is backed by a 3 year warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Trac\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 69390\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 13 gallons per minute (49.2 liters per minute)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Priming:\u003c\/strong\u003e Up to 5 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntake Hose Size:\u003c\/strong\u003e 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 year manufacturer warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666996100690\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eT10069\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Trac 69390 Macerator Pump?\u003c\/strong\u003e The Trac 69390 delivers a 13 gallon per minute (49.2 liters per minute) flow rate, which is enough to empty a waste or fish box tank in minutes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far can the Trac 69390 self-prime?\u003c\/strong\u003e This macerator pump self-primes up to 5 feet, allowing it to be mounted away from the tank while still pulling suction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Trac 69390 replace an older Trac pump?\u003c\/strong\u003e Yes, part number 69390 replaces the older Trac part number T10069 and can be used as a direct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size intake hose does the Trac 69390 use?\u003c\/strong\u003e The Trac 69390 Macerator Pump uses a 1.5 inch intake hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Trac 69390 Macerator Pump run on?\u003c\/strong\u003e It operates on 12V DC power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Trac 69390 Macerator Pump made of?\u003c\/strong\u003e The housing on the Trac 69390 is black plastic, paired with a seamless motor tube and O-ring sealed motor end frames.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Trac 69390 be run dry?\u003c\/strong\u003e No, the Trac 69390 should never run dry for more than 15 to 20 seconds; when the tank empties the pump gets louder with a high pitch sound and should be shut off immediately, or the impeller and housing can be damaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Trac 69390 Macerator Pump ignition protected?\u003c\/strong\u003e Yes, the Trac 69390 is ignition protected for safe onboard installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Trac 69390 Macerator Pump?\u003c\/strong\u003e The Trac 69390 is backed by a 3 year manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Trac 69390 Macerator Pump weigh?\u003c\/strong\u003e The Trac 69390 weighs 5.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is the Trac 69390 designed for?\u003c\/strong\u003e It is designed specifically for sanitation waste and fish box evacuations on boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should the pump switch for the Trac 69390 be installed?\u003c\/strong\u003e The switch should be installed near both the pump and the tank so the operator can hear the pump running and know when the tank has emptied.\u003c\/p\u003e","brand":"Trac Outdoor","offers":[{"title":"Default Title","offer_id":49028252696795,"sku":"TRC-69390","price":182.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/trc-t10069_lg__42539.1558172275.500.750.jpg?v=1785165650"},{"product_id":"rule-98b-800-gph-shower-drain-system-12v-dc-automatic-pump-with-back-flow-prevention","title":"Rule 98B 800 GPH Shower Drain System - 12V DC Automatic Pump with Back Flow Prevention","description":"\u003cp\u003eThe Rule 98B Shower Drain System is a complete automatic pump-and-box unit designed to clear grey water from boat shower and sink drains, keeping bilge areas and living spaces free of nuisance water. Rated at 800 GPH nominal flow, the system pairs a high-capacity 12V DC pump with a sealed polycarbonate shower box that resists unwanted water splash while remaining fully serviceable without special tools. A back flow prevention feature reduces the amount of water that can siphon back into the shower box, protecting against re-flooding once the pump shuts off. The unit uses a fast fix mounting system and threaded port fittings for straightforward installation, and it is built to Rule's testing standards for automatic operation in demanding marine environments. This makes the Rule 98B suitable for boat owners replacing a worn-out shower or sink drain pump, or for new shower\/sink drain installations where reliable, hands-off water removal is required. The pump draws 2.9 amps at 12V (3.5 amps at 13.6V) and is protected by a 5 amp fuse, with a 3\/4 inch discharge hose connection for compatibility with standard marine hose. The system measures 10.24 inches long by 9.5 inches wide by 5.5 inches high and is constructed of durable plastic components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rule\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 98B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Flow Rate:\u003c\/strong\u003e 800 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmp Draw:\u003c\/strong\u003e 2.9 Amps at 12V, 3.5 Amps at 13.6V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Fuse Size:\u003c\/strong\u003e 5 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDischarge Hose Diameter:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid Type:\u003c\/strong\u003e Sealed polycarbonate lid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Clear or Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 10.24 inches L x 9.5 inches W x 5.5 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Flow Prevention:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Rule 98B Shower Drain System?\u003c\/strong\u003e The Rule 98B has a nominal flow rate of 800 GPH, providing high-capacity removal of shower and sink grey water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this shower drain system use?\u003c\/strong\u003e The Rule 98B operates on 12 VDC, drawing 2.9 amps at 12V and 3.5 amps at 13.6V.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuse size is recommended for the Rule 98B?\u003c\/strong\u003e A 5 amp fuse is recommended for the Rule 98B Shower Drain System.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Rule 98B include back flow prevention?\u003c\/strong\u003e Yes, the Rule 98B Shower Drain System is equipped with back flow prevention to reduce water siphoning back into the shower box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size discharge hose does the Rule 98B use?\u003c\/strong\u003e The Rule 98B has a 3\/4 inch discharge hose diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Rule 98B shower box made from?\u003c\/strong\u003e The Rule 98B shower box lid is a sealed polycarbonate lid, with the overall unit constructed of plastic components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Rule 98B Shower Drain System?\u003c\/strong\u003e The Rule 98B is available in a clear or neutral color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Rule 98B weigh?\u003c\/strong\u003e The Rule 98B Shower Drain System weighs 3.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Rule 98B?\u003c\/strong\u003e The Rule 98B measures 10.24 inches long by 9.5 inches wide by 5.5 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Rule 98B easy to install?\u003c\/strong\u003e Yes, the Rule 98B uses a fast fix mounting system with threaded port fittings for simple installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Rule 98B be serviced without special tools?\u003c\/strong\u003e Yes, the Rule 98B shower box has a clip-on lid designed to be fully serviceable without the need for any tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Rule 98B fully automatic?\u003c\/strong\u003e Yes, the Rule 98B Shower Drain System is designed for fully automatic operation.\u003c\/p\u003e","brand":"Rule","offers":[{"title":"Default Title","offer_id":49028302078171,"sku":"RUL-98B","price":176.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Rule-Shower-Pump-System-New__30718.1737897406.500.750.jpg?v=1785165440"},{"product_id":"shurflo-slv-fresh-water-pump-105-013-12v-1-0-gpm-self-priming-rv-marine-pump","title":"Shurflo SLV Fresh Water Pump 105-013, 12V 1.0 GPM Self-Priming RV\/Marine Pump","description":"\u003cp\u003eThe Shurflo SLV Fresh Water Pump (105-013) is a rugged, lightweight, compact 12 volt demand pump built for single-fixture RV and marine fresh water systems. It delivers 1.0 GPM (3.8 LPM) and is designed for low volume, intermittent duty applications such as a sink, shower, or washdown station. The pump is self-priming and can be located up to 2.5 feet above the water level, and it can also be positioned at the same level as or below the tank; horizontal and vertical prime performance varies depending on fluid viscosity and pump configuration.\u003c\/p\u003e\u003cp\u003eA three chamber diaphragm design combines with a long life pressure demand switch rated to a 30 PSI (2.0 BAR) shut-off pressure for durable, dependable operation. The motor is splash-proof and thermally protected, and the pump includes run-dry capability so it is not damaged if it draws air. Built-in 3\/8 inch hose barb ports and flexible mounting feet simplify installation into an existing water line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 105-013\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 1.0 GPM (3.8 LPM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Amps:\u003c\/strong\u003e 2.5 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorts:\u003c\/strong\u003e 3\/8 inch hose barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-off Pressure:\u003c\/strong\u003e 30 PSI (2.0 BAR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Self-Prime Lift:\u003c\/strong\u003e 2.5 feet above water level\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 6.8 inches x 3.9 inches x 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a single-fixture RV\/marine fresh water pump suited to low volume, intermittent duty applications; it is not tied to a specific boat make, model, or engine.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Shurflo 105-013 pump?\u003c\/strong\u003e The Shurflo 105-013 SLV Fresh Water Pump delivers 1.0 GPM (3.8 LPM) at open flow, making it suited to a single fixture such as a sink or shower rather than multiple simultaneous fixtures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow high above the water tank can this pump be mounted?\u003c\/strong\u003e The Shurflo SLV pump 105-013 is self-priming and can be located up to 2.5 feet above the water level; it can also be mounted at the same level as or below the tank, and actual prime performance varies with fluid viscosity and pump orientation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Shurflo 105-013 pump safe to run dry?\u003c\/strong\u003e Yes, the 105-013 has run-dry capability, so it will not be damaged if the water supply runs out or air enters the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Shurflo SLV 105-013 pump run on?\u003c\/strong\u003e This pump operates on 12 VDC and draws a maximum of 2.5 amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose fittings does the 105-013 use?\u003c\/strong\u003e The Shurflo 105-013 has built-in 3\/8 inch hose barb ports for connecting to standard RV\/marine fresh water plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the shut-off pressure of this pump?\u003c\/strong\u003e The pressure demand switch on the Shurflo 105-013 shuts the pump off at 30 PSI (2.0 BAR), and it automatically restarts on demand when a fixture is opened.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the Shurflo 105-013 pump?\u003c\/strong\u003e The Shurflo SLV 105-013 measures 6.8 inches by 3.9 inches by 2.5 inches and weighs 1.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Shurflo 105-013 supply more than one fixture at a time?\u003c\/strong\u003e No, the 105-013 is designed as a single-fixture pump for low volume, intermittent duty use rather than multi-fixture demand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Shurflo SLV pump housing made of?\u003c\/strong\u003e The 105-013 pump housing is plastic, finished in black, and the motor is splash-proof with a built-in thermal protector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Shurflo 105-013 include mounting hardware?\u003c\/strong\u003e The pump has flexible, built-in mounting feet as part of its housing for securing it to a mounting surface; no separate mounting bracket is listed with it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of protection does the 105-013 motor have?\u003c\/strong\u003e The Shurflo 105-013 motor is splash-proof and equipped with a thermal protector to guard against overheating during operation.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49029558763739,"sku":"SHU-105-013","price":85.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/015-013__81381.1737844674.500.750.jpg?v=1785165652"},{"product_id":"shurflo-3200-001-13-gpm-macerator-pump-12v-marine-waste-and-fish-box-evacuation-pump","title":"Shurflo 3200-001 13 GPM Macerator Pump, 12V Marine Waste and Fish Box Evacuation Pump","description":"\u003cp\u003eThe Shurflo 3200-001 is a 13 GPM macerator pump built for sanitation waste and fish box evacuation aboard boats. Instead of simply moving waste, its dual blade grinder cuts solids down before discharge, so waste passes cleanly through the hose run with less risk of clogging. The pump uses a premium impeller design rated for run-dry operation, so brief dry-running during priming or tank drawdown will not damage the unit. Inside, a seamless shell motor with o-ring sealed end bells and a sealed manual turn key keeps moisture out of the electrical components, while ignition protection and thermal protection let it operate safely in enclosed marine spaces.\u003c\/p\u003e\u003cp\u003eThe pump is self-priming, supporting up to 5 feet of wet lift and 4 feet of dry lift, which gives some flexibility in mounting it away from the tank or fish box being emptied. It runs on 12 VDC and draws up to 17 amps at maximum load. The 1-1\/2 inch barb\/NPT inlet and 1 inch barb outlet are sized for standard marine sanitation hose. It is CE listed and backed by a 1 year manufacturer's warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 3200-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Sanitation waste and fish box evacuation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Port:\u003c\/strong\u003e 1-1\/2 inch Barb \/ 1-1\/2 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Port:\u003c\/strong\u003e 1 inch Barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 13 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Amps:\u003c\/strong\u003e 17 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 10.6 inches x 4.9 inches x 3.8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.075 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet Lift:\u003c\/strong\u003e up to 5 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Lift:\u003c\/strong\u003e up to 4 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun Dry Capability:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protected:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermally Protected:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e CE Listed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the Shurflo 3200-001 pump move?\u003c\/strong\u003e The Shurflo 3200-001 macerator pump moves up to 13 GPM, making it suitable for fast sanitation waste and fish box evacuation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fittings does this macerator pump use?\u003c\/strong\u003e The 3200-001 has a 1-1\/2 inch barb\/NPT inlet port and a 1 inch barb outlet port, sized for standard marine sanitation hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this pump run dry without being damaged?\u003c\/strong\u003e Yes, the Shurflo 3200-001 has run-dry capability built into its impeller design, so brief dry operation during priming will not damage it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Shurflo 3200-001 macerator pump require?\u003c\/strong\u003e This pump runs on 12 VDC and draws up to 17 amps maximum, so it should be wired to a 12 volt marine electrical circuit sized for that draw.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Shurflo 3200-001 safe to install in an enclosed engine space?\u003c\/strong\u003e Yes, it is ignition protected and thermally protected, which allows safe operation in enclosed marine compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Shurflo 3200-001 macerator pump weigh?\u003c\/strong\u003e The Shurflo 3200-001 weighs 5.075 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum lift height for this macerator pump?\u003c\/strong\u003e The 3200-001 is self-priming and supports up to 5 feet of wet lift and 4 feet of dry lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Shurflo 3200-001 macerator pump used for?\u003c\/strong\u003e It is designed for sanitation waste evacuation and fish box evacuation on boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Shurflo 3200-001 CE listed?\u003c\/strong\u003e Yes, the Shurflo 3200-001 macerator pump is CE listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Shurflo 3200-001?\u003c\/strong\u003e Shurflo backs the 3200-001 macerator pump with a 1 year manufacturer's warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Shurflo 3200-001 pump housing made of?\u003c\/strong\u003e The 3200-001 macerator pump housing is made of metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the dual blade design on this pump help prevent clogging?\u003c\/strong\u003e The 3200-001 uses a dual blade grinder that macerates solids before they reach the outlet, reducing the risk of clogs during discharge.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49029558960347,"sku":"SHU-3200-001","price":209.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/shu-3200-001_lg__10981.1558174680.500.750.jpg?v=1785165654"},{"product_id":"shurflo-aqua-king-ii-junior-fresh-water-pump-12v-2-0-gpm-replaces-2901","title":"Shurflo Aqua King II Junior Fresh Water Pump, 12V, 2.0 GPM, Replaces 2901","description":"\u003cp\u003eThe Shurflo Aqua King II Junior Fresh Water Pump is a 12V DC diaphragm pump built for medium flow demand in marine plumbing systems. Designed to deliver smooth, consistent flow of 2.0 GPM without rapid cycling, it is well suited to boats with a single fixture or light multi-fixture demand such as a galley faucet, head, or shower. The pump uses a unique over-molded, single-piece 4 chamber diaphragm along with a corrosion-resistant motor and an adjustable pressure switch, allowing it to hold steady pressure as demand changes.\u003c\/p\u003e\u003cp\u003eBuilt for reliability aboard a boat, the Aqua King II Junior is thermally protected, ignition protected, and rated to run dry without damage, so an empty tank or temporary loss of water supply will not harm the motor. It is intended for intermittent duty rather than continuous running. The pump ships with two 1\/2 inch hose barb fittings for straightforward plumbing hookup and is backed by a three year manufacturer's warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4128-110-E04\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 2.0 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Amperage:\u003c\/strong\u003e 3.5 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Pressure:\u003c\/strong\u003e 30 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 8.2 inches x 4.9 inches x 4.1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings Included:\u003c\/strong\u003e Two 1\/2 inch hose barb fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty Cycle:\u003c\/strong\u003e Intermittent duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragm:\u003c\/strong\u003e 4 chamber diaphragm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 year manufacturer's warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 752324012374\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for 12V DC marine freshwater plumbing systems.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2901\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Shurflo Aqua King II Junior pump (4128-110-E04)?\u003c\/strong\u003e The Shurflo Aqua King II Junior, part number 4128-110-E04, delivers a flow rate of 2.0 GPM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes part number 4128-110-E04 replace an older Shurflo pump?\u003c\/strong\u003e Yes, the 4128-110-E04 is a replacement for Shurflo p\/n 2901.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this fresh water pump run on?\u003c\/strong\u003e This pump runs on 12 VDC, making it suitable for standard marine 12V DC freshwater systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Aqua King II Junior fresh water pump?\u003c\/strong\u003e The Aqua King II Junior measures 8.2 inches x 4.9 inches x 4.1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much current does the Aqua King II Junior draw?\u003c\/strong\u003e Maximum amperage draw for the 4128-110-E04 pump is 3.5 Amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the shut-off pressure on this pump?\u003c\/strong\u003e The pump has a shut-off pressure of 30 PSI, controlled by its adjustable pressure switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fittings are included with the Shurflo 4128-110-E04?\u003c\/strong\u003e Two 1\/2 inch hose barb fittings are included with the Aqua King II Junior pump for connecting to the boat's plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this pump run dry without being damaged?\u003c\/strong\u003e Yes, the Aqua King II Junior is built to run dry without damage, protecting the motor if the water supply is temporarily lost.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump ignition protected for use on a boat?\u003c\/strong\u003e Yes, the 4128-110-E04 is ignition protected and thermally protected, meeting marine safety requirements for onboard installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Aqua King II Junior fresh water pump weigh?\u003c\/strong\u003e The pump weighs 4.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Aqua King II Junior and the Aqua King II Premium 4.0 pump?\u003c\/strong\u003e The Aqua King II Junior (4128-110-E04) delivers 2.0 GPM for single or light multi-fixture use, while the Aqua King II Premium 4.0 delivers 4.0 GPM with a built-in mechanical bypass designed for boats with multiple fixtures running at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the diaphragm on this pump a multi-piece design?\u003c\/strong\u003e No, the 4128-110-E04 uses a unique over-molded, single-piece 4 chamber diaphragm rather than a multi-piece design.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49029559124187,"sku":"SHU-4128-110-E04","price":133.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SHU-4128-110-E04__56294.1722357356.500.750.jpg?v=1785165654"},{"product_id":"shurflo-aqua-king-ii-premium-4-0-fresh-water-pump-12v-dc-4-0-gpm-replaces-4901","title":"Shurflo Aqua King II Premium 4.0 Fresh Water Pump, 12V DC, 4.0 GPM, Replaces 4901","description":"\u003cp\u003eThe Shurflo Aqua King II Premium 4.0 Fresh Water Pump is a 12V DC diaphragm pump built for boats with multiple plumbing fixtures, delivering steady, \"just like home\" water pressure at the galley sink, head, and shower without repeated pressure drops. A built-in mechanical bypass function lets the pump operate smoothly at lower flow conditions with minimal cycling, so it runs quietly and does not short-cycle when a single fixture is opened. The pump uses a co-molded, single-piece diaphragm across 4 chambers, paired with a heavy-duty, seamless shell and an electro-coated motor designed to resist corrosion in the marine environment. O-ring sealed end bells and fully sealed wire entries keep water out of the electrical components for a long service life. This pump is self-priming up to 6 feet and can run dry without damage, making it forgiving during tank changeovers or line work. It is thermally protected and ignition protected, with a sealed pressure switch that is also adjustable to fine-tune the shut-off point. Installation is straightforward: the pump ships with an inlet strainer and two 1\/2 inch hose barb fittings, and it is CE and IMCI Certified (8846) with a 3 year manufacturer's warranty. It is designed for 12V DC marine and RV freshwater plumbing systems and is a direct replacement for pump p\/n 4901.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4148-153-E75\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 4.0 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 10 inches x 5 inches x 4.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmps (Max):\u003c\/strong\u003e 10 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Pressure:\u003c\/strong\u003e 55 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuse:\u003c\/strong\u003e 15 amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Size:\u003c\/strong\u003e 1\/2 inch hose barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.95 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e EPDM, Polypropylene (PP), Santoprene, Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e CE, IMCI Certified (8846)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 Year Manufacturer's Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 752324011858\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for 12V DC marine and RV freshwater plumbing systems, particularly boats and cabins with multiple fixtures running off the same pump.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e4901\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat flow rate does the Shurflo 4148-153-E75 pump deliver?\u003c\/strong\u003e The Shurflo Aqua King II Premium 4.0 Fresh Water Pump delivers 4.0 GPM with a 55 PSI shut-off pressure, enough to supply multiple fixtures running at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump a direct replacement for pump p\/n 4901?\u003c\/strong\u003e Yes, the Shurflo 4148-153-E75 is listed as a direct replacement for pump p\/n 4901.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Aqua King II Premium 4.0 run dry without being damaged?\u003c\/strong\u003e Yes, this pump can run dry without damage and is also self-priming up to 6 feet, so it recovers on its own after a tank runs low.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fittings come with the 4148-153-E75 pump?\u003c\/strong\u003e It includes an inlet strainer and two 1\/2 inch hose barb fittings for connecting to your plumbing lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this Shurflo water pump?\u003c\/strong\u003e The Shurflo Aqua King II Premium 4.0 measures 10 inches x 5 inches x 4.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Aqua King II Premium 4.0 pump weigh?\u003c\/strong\u003e This pump weighs 7.95 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and amperage does this pump require?\u003c\/strong\u003e The 4148-153-E75 runs on 12 VDC and draws up to 10 amps maximum, with a 15 amp fuse rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is this pump quieter than a standard water pump?\u003c\/strong\u003e A built-in mechanical bypass function allows the Aqua King II Premium to operate smoothly at lower flow conditions with minimal cycling, which reduces the pulsing and noise common in simpler demand pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pump body made of?\u003c\/strong\u003e The Shurflo Aqua King II Premium 4.0 uses EPDM, Polypropylene (PP), Santoprene, and Stainless Steel in its construction, with a heavy-duty seamless shell and an electro-coated motor for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump certified for marine use?\u003c\/strong\u003e Yes, the 4148-153-E75 is CE and IMCI Certified (8846) and is ignition protected and thermally protected for marine installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this pump?\u003c\/strong\u003e The Shurflo Aqua King II Premium 4.0 ships with the pump unit, an inlet strainer, and two 1\/2 inch hose barb fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the warranty on the Aqua King II Premium 4.0?\u003c\/strong\u003e This pump carries a 3 year manufacturer's warranty.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49029559222491,"sku":"SHU-4148-153-E75","price":327.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Aqua-King-II-Premium__71567.1739460239.500.750.jpg?v=1785165655"},{"product_id":"shurflo-winterizing-marine-oil-change-system-8050-305-426-12v-self-priming-pump-kit-with-3-5-gallon-bucket","title":"Shurflo Winterizing\/Marine Oil Change System 8050-305-426, 12V Self-Priming Pump Kit with 3.5 Gallon Bucket","description":"\u003cp\u003eThe Shurflo Winterizing\/Marine Oil Change System (part number 8050-305-426) is a complete, self-priming fluid transfer kit built for winterizing, oil changing, and general liquid transfer on boats and other vehicles. At the core is a premium general purpose 12V DC diaphragm pump with an internal thermal protector, so the motor is protected from overload during use. The pump is rated for a flow rate of 1.5 GPM and draws 4 amps, and it can run dry without damage, which makes priming and draining tasks simple and forgiving.\u003c\/p\u003e\u003cp\u003eThis system is suitable for pumping engine oil, automatic transmission fluid, low viscosity gear lubes, and anti-freeze solutions, giving it broad utility for routine maintenance and seasonal lay-up. The kit is easy to install and comes complete with everything needed to get started: an 8 foot suction tube (1\/4 inch OD, oil and heat resistant), 8 foot battery leads with alligator clips for quick power hookup, a dipstick probe, a hose kit, and a 3.5 gallon storage bucket to collect the fluid being pumped. The pump body is made of polypropylene, the diaphragm is oil-resistant Geolast, and the valves are Buna-n, a combination chosen to hold up to oil, antifreeze, and other automotive and marine fluids. The unit is CE listed and measures 16 inches H x 12.5 inches D.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 8050-305-426\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 1.5 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmps:\u003c\/strong\u003e 4 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 12V DC with Internal Thermal Protector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragm Material:\u003c\/strong\u003e Geolast, Oil Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Body Material:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Material:\u003c\/strong\u003e Buna-n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiver:\u003c\/strong\u003e Plastic, 3 Gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction Tube:\u003c\/strong\u003e 8 Feet, 1\/4 inch OD, Oil and Heat Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Leads:\u003c\/strong\u003e 8 Feet with Alligator Clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 16 inches H x 12.5 inches D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Container Capacity:\u003c\/strong\u003e 3.5 Gallon Bucket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Run Capability:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Shurflo 8050-305-426 used for?\u003c\/strong\u003e The Shurflo Winterizing\/Marine Oil Change System (8050-305-426) is used for winterizing, changing engine oil, and general liquid transfer, and it is suitable for pumping engine oil, automatic transmission fluids, low viscosity gear lubes, and anti-freeze solutions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the pump self-priming?\u003c\/strong\u003e Yes, the pump included in the Shurflo 8050-305-426 system is self-priming, and it can run dry without damage, which makes it easier to start drawing fluid without pre-filling the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this system run on?\u003c\/strong\u003e The Shurflo 8050-305-426 pump runs on 12 VDC and connects to a battery using the included 8 foot leads with alligator clips.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Shurflo 8050-305-426 pump?\u003c\/strong\u003e This system delivers a flow rate of 1.5 GPM through its 12V DC diaphragm pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included with the Shurflo Winterizing\/Marine Oil Change System?\u003c\/strong\u003e The 8050-305-426 kit includes the 12V DC pump with 8 foot cables, a dipstick probe, battery clips, a hose kit, and a 3.5 gallon storage bucket to hold the fluid being transferred.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials are the pump components made of?\u003c\/strong\u003e The Shurflo 8050-305-426 pump uses a polypropylene pump body, an oil-resistant Geolast diaphragm, and Buna-n valves, a combination suited to handling oil, transmission fluid, and antifreeze.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is the storage bucket included with this system?\u003c\/strong\u003e A 3.5 gallon storage bucket is included with the Shurflo 8050-305-426 system to collect pumped fluids during oil changes or winterizing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this pump run dry without being damaged?\u003c\/strong\u003e Yes, dry run capability is a built-in feature of the Shurflo 8050-305-426 pump, so it will not be damaged if it temporarily runs without fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Shurflo 8050-305-426 system?\u003c\/strong\u003e The system measures 16 inches H x 12.5 inches D and weighs 8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the suction tube and battery leads?\u003c\/strong\u003e The Shurflo 8050-305-426 includes an 8 foot suction tube (1\/4 inch OD, oil and heat resistant) and 8 foot battery leads with alligator clips.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this system easy to install?\u003c\/strong\u003e Yes, the Shurflo 8050-305-426 Winterizing\/Marine Oil Change System is designed to be easy to install, with all necessary tubing, cables, and the pump included in the kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Shurflo 8050-305-426 protected against motor overload?\u003c\/strong\u003e The pump in this system has thermal overload protection built into its 12V DC motor, guarding against damage during extended use.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49029559353563,"sku":"SHU-8050-305-426","price":222.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/shu-8050-305-426_lg__55238.1722504429.500.750.jpg?v=1785165656"},{"product_id":"shurflo-electric-water-faucet-with-switch-12v-white-360-degree-rotation","title":"Shurflo Electric Water Faucet with Switch, 12V, White, 360 Degree Rotation","description":"\u003cp\u003eThis Shurflo electric water faucet brings washerless, ceramic-disc operation to a single-fixture galley or head installation aboard a boat or RV. A built-in 12 VDC switch lets you turn flow on and off right at the faucet, and the 360 degree spout rotation lets the faucet swing to whatever position is most convenient for the sink layout. Because the valve uses a ceramic disc rather than a traditional rubber washer, it delivers smooth, consistent flow without the drip and wear issues that washered faucets develop over time.\u003c\/p\u003e\u003cp\u003eThe faucet is built from rugged ABS plastic in a white finish, so it resists rust and corrosion in a marine environment while keeping a clean, modern look at the sink. It includes built-in backflow prevention and is rated for pressures up to 87 psi (6 bar), making it suitable for use with either an onboard water pump or a pressurized city water hookup. Installation is a single-hole, deck-mount setup with 3\/8 inch barb ports, and the faucet operates on a 12 VDC supply at up to 3.0 amps.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 94-009-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 3.0 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Single Spout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpout Rotation:\u003c\/strong\u003e 360 Degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Size:\u003c\/strong\u003e 3\/8 inch Barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e ABS Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Deck Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 2.2 gallons per minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Pressure:\u003c\/strong\u003e 87 psi (6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpout Height:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 752324001835\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Shurflo 94-009-10 electric water faucet used for?\u003c\/strong\u003e The Shurflo 94-009-10 is a single-fixture electric water faucet designed for galley and head installations on boats and RVs, operating on a 12 VDC power supply with a built-in switch for flow control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this faucet work with a city water hookup or only a pump?\u003c\/strong\u003e Yes, the Shurflo 94-009-10 is designed for ease-of-use with either an onboard water pump or a pressurized city water system, and it is rated for pressures up to 87 psi (6 bar).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and amperage does the Shurflo electric faucet require?\u003c\/strong\u003e It runs on 12 VDC and draws up to 3.0 amps during operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the spout be rotated to different positions?\u003c\/strong\u003e The spout on the Shurflo 94-009-10 rotates a full 360 degrees, allowing it to be positioned to suit the sink and installation layout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Shurflo 94-009-10 faucet made from?\u003c\/strong\u003e This faucet is constructed from rugged ABS plastic in a white finish, chosen to resist rust and corrosion in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this faucet washerless?\u003c\/strong\u003e Yes, the Shurflo 94-009-10 uses a washerless ceramic disc valve instead of a traditional rubber washer, giving smooth, consistent flow with less wear over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of this electric faucet?\u003c\/strong\u003e The Shurflo 94-009-10 delivers a flow rate of 2.2 gallons per minute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Shurflo 94-009-10 installed?\u003c\/strong\u003e It is designed as a single-hole, deck-mount installation with 3\/8 inch barb ports, making it straightforward to install on a boat or RV.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the faucet have backflow prevention?\u003c\/strong\u003e Yes, built-in backflow prevention is included on the Shurflo 94-009-10 electric water faucet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options are available for this faucet?\u003c\/strong\u003e The Shurflo 94-009-10 is available in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Shurflo 94-009-10 faucet weigh?\u003c\/strong\u003e The Shurflo 94-009-10 electric water faucet weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the switch on this faucet work?\u003c\/strong\u003e The Shurflo 94-009-10 has a built-in switch at the faucet itself, letting you start and stop water flow without a separate control.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49029559517403,"sku":"SHU-94-009-10","price":56.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/shu-94-009-10_lg__88481.1580998951.500.750.jpg?v=1785165657"},{"product_id":"ice-eater-large-screen-kit-hexagon-panel-part-24500-for-p750-and-p1000-de-icers","title":"Ice Eater Large Screen Kit Hexagon Panel, Part 24500, for P750 and P1000 De-Icers","description":"\u003cp\u003eThe Ice Eater Large Screen Kit (Part 24500) is a hexagon panel intake screen kit designed for use with the Ice Eater P750 and P1000 de-icers and aerators. The screen kit protects the unit's motor and propeller housing from debris while allowing water flow for effective aeration and ice prevention. Its hexagon panel design provides broad coverage around the intake area, making it a straightforward replacement or upgrade component for owners running P750 or P1000 model de-icing and aeration units.\u003c\/p\u003e\u003cp\u003eThis screen kit is sold as a standalone accessory component, letting owners replace a worn or damaged screen without purchasing a complete new de-icer unit. It is built to the same dimensional footprint as the original screen assembly used on the P750 and P1000 models, so it installs using the existing mounting points on those units.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Ice Eater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 24500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Screen Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Design:\u003c\/strong\u003e Hexagon panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Models:\u003c\/strong\u003e P750, P1000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 13.23 x 12.24 x 0.79 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 14.02 x 12.99 x 0.98 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652443002211\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Ice Eaters and Aerators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIce Eater P750 de-icer\/aerator\u003c\/li\u003e\n\u003cli\u003eIce Eater P1000 de-icer\/aerator\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Ice Eater Large Screen Kit part 24500 used for?\u003c\/strong\u003e Part 24500 is a hexagon panel screen kit that fits over the intake area of the Ice Eater P750 and P1000 de-icers and aerators, protecting the motor and propeller housing from debris while water flows through for aeration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Ice Eater models does the screen kit fit?\u003c\/strong\u003e This screen kit is designed to fit the Ice Eater P750 and P1000 de-icer\/aerator models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape is the screen panel?\u003c\/strong\u003e The screen kit uses a hexagon panel design that wraps around the intake area of the P750 and P1000 units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Ice Eater screen kit weigh?\u003c\/strong\u003e The Ice Eater Large Screen Kit, part 24500, weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the screen kit?\u003c\/strong\u003e The item measures 14.02 x 12.99 x 0.98 inches; packaged, part 24500 ships at 13.23 x 12.24 x 0.79 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I replace just the screen without buying a new de-icer unit?\u003c\/strong\u003e Yes, part 24500 is sold as a standalone screen kit so owners of the P750 or P1000 can replace a worn or damaged screen without buying a complete new unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Ice Eater part or an aftermarket copy?\u003c\/strong\u003e Part 24500 is a genuine Ice Eater component made for the P750 and P1000 de-icer and aerator models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the screen kit?\u003c\/strong\u003e The kit includes the hexagon panel screen assembly, part number 24500, sized for installation on the P750 and P1000 units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the screen made from?\u003c\/strong\u003e The dossier for part 24500 does not specify the screen material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the screen kit come with mounting hardware?\u003c\/strong\u003e The available information for part 24500 does not list separate mounting hardware as included in the kit.\u003c\/p\u003e","brand":"Ice Eater","offers":[{"title":"Default Title","offer_id":49031078052059,"sku":"P-H-24500","price":24.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/714pnj0o8sL.jpg?v=1785208269"},{"product_id":"johnson-pump-aqua-jet-5-2-wps-12v-water-pressure-pump-10-13406-107","title":"Johnson Pump Aqua Jet 5.2 WPS 12V Water Pressure Pump 10-13406-107","description":"\u003cp\u003eThe Johnson Pump Aqua Jet 5.2 WPS is a 12-volt DC electric water pressure pump built for onboard freshwater systems, delivering a maximum flow rate of 5.2 gallons per minute to supply sinks, showers, and washdown fixtures with consistent water pressure. Identified by manufacturer part number 10-13406-107 (model number 3001.4101), this pump features a plastic housing finished in Aqua, giving it a compact, corrosion-resistant construction suited to the marine environment.\u003c\/p\u003e\u003cp\u003eMeasuring 10.7 inches long by 7.3 inches wide by 4.33 inches high and weighing 6.55 pounds, the Aqua Jet 5.2 WPS is sized to fit into typical boat plumbing bays where a self-contained demand pump is needed. As an electric-powered unit running on 12 volts DC, it integrates directly into a standard 12V DC boat electrical system without additional voltage conversion. The pump is intended for freshwater pressure delivery applications on boats and similar vessels equipped with a 12V DC water system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Johnson Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 10-13406-107\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e 3001.4101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Aqua Jet 5.2 WPS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 5.2 Gallons Per Minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Electric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Aqua\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 10.7 inches L x 7.3 inches W x 4.33 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.55 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 729321910897\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00729321910897\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Johnson Pump Aqua Jet 5.2 WPS used for?\u003c\/strong\u003e The Aqua Jet 5.2 WPS is a 12-volt DC electric water pressure pump used to supply pressurized freshwater to onboard fixtures such as sinks and showers, moving up to 5.2 gallons per minute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum flow rate of Johnson Pump part number 10-13406-107?\u003c\/strong\u003e Part number 10-13406-107 has a maximum flow rate of 5.2 gallons per minute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Aqua Jet 5.2 WPS pump run on?\u003c\/strong\u003e It runs on 12 volts DC, matching a standard boat 12V electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Johnson Pump 10-13406-107 water pressure pump?\u003c\/strong\u003e The 10-13406-107 pump measures 10.7 inches long by 7.3 inches wide by 4.33 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Johnson Pump Aqua Jet 5.2 WPS weigh?\u003c\/strong\u003e The Aqua Jet 5.2 WPS weighs 6.55 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Johnson Pump 10-13406-107 pump housing made of?\u003c\/strong\u003e The housing on part number 10-13406-107 is made of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Johnson Pump Aqua Jet 5.2 WPS pump?\u003c\/strong\u003e It has an Aqua-colored housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the model number for the Johnson Pump Aqua Jet 5.2 WPS?\u003c\/strong\u003e The Aqua Jet 5.2 WPS carries model number 3001.4101, with manufacturer part number 10-13406-107.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Johnson Pump Aqua Jet 5.2 WPS an electric pump?\u003c\/strong\u003e Yes, it is an electric pump powered by a 12-volt DC supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for Johnson Pump part 10-13406-107?\u003c\/strong\u003e The UPC for part number 10-13406-107 is 729321910897.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":49031209681115,"sku":"JON-10-13406-107","price":222.16,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61pbBtbNWoL.jpg?v=1785212052"},{"product_id":"johnson-pump-aqua-jet-wps-2-9-gpm-12v-water-pressure-pump-2-8-bar-npt-ports","title":"Johnson Pump Aqua Jet WPS 2.9 GPM 12V Water Pressure Pump, 2.8 Bar, NPT Ports","description":"\u003cp\u003eThe Johnson Pump Aqua Jet WPS is a 12V DC water pressure pump built for onboard fresh water systems on boats and RVs. It delivers a maximum flow rate of 2.9 gallons per minute at up to 2.8 bar of pressure, giving consistent water delivery to sinks, showers, and washdown fittings even at the far end of a plumbing run. The pump can lift water up to 6.5 feet, making it suitable for tanks mounted below the point of use.\u003c\/p\u003e\u003cp\u003eIts housing is molded from durable black plastic, keeping the unit lightweight while resisting the moisture and vibration typical of marine and RV installations. Water connections use NPT threaded ports, allowing it to be plumbed directly into standard NPT fittings and hose adapters without additional thread adapters. At 12V DC, it runs directly off a boat or RV battery bank, making it a straightforward addition or replacement for an existing onboard pressure water system.\u003c\/p\u003e\u003cp\u003eThe pump measures 10 inches by 10 inches by 12 inches and weighs 4.49375 pounds, sized to fit within typical under-sink or utility compartment mounting spaces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Johnson Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 10-13405-103\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Aqua Jet WPS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 2.9 Gallons Per Minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pressure:\u003c\/strong\u003e 2.8 Bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Thread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Lifting Height:\u003c\/strong\u003e 6.5 Feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 10 inches L x 10 inches W x 12 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.49375 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Battery Powered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 07330717010447\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum flow rate of the Johnson Pump Aqua Jet WPS?\u003c\/strong\u003e The Johnson Pump Aqua Jet WPS (part number 10-13405-103) delivers a maximum flow rate of 2.9 gallons per minute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this pump run on?\u003c\/strong\u003e This is a 12V DC pump, so it runs directly off a 12-volt battery bank, which is standard for boats and RVs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much pressure does the Aqua Jet WPS produce?\u003c\/strong\u003e It produces up to 2.8 bar of maximum pressure, part number 10-13405-103, which supports consistent flow to multiple fixtures on a fresh water system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fittings does this pump use?\u003c\/strong\u003e The Johnson Pump Aqua Jet WPS uses NPT threaded ports for both the inlet and outlet connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow high can this pump lift water?\u003c\/strong\u003e 6.5 feet is the maximum lifting height for the Aqua Jet WPS, so it can draw water from a tank mounted below the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the pump?\u003c\/strong\u003e The Johnson Pump Aqua Jet WPS measures 10 inches long by 10 inches wide by 12 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the pump weigh?\u003c\/strong\u003e It weighs 4.49375 pounds, part number 10-13405-103.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the pump housing made from?\u003c\/strong\u003e The housing is made from black plastic, chosen for its light weight and resistance to moisture in marine and RV environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump powered by battery or shore power?\u003c\/strong\u003e The Aqua Jet WPS is battery powered, running on 12V DC rather than requiring an AC shore power connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this pump typically used for?\u003c\/strong\u003e It is used as a fresh water pressure pump aboard boats and RVs, supplying sinks, showers, and washdown fittings with pressurized water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for this pump?\u003c\/strong\u003e The Johnson Pump Aqua Jet WPS pump carries part number 10-13405-103.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":49031209812187,"sku":"JON-10-13405-103","price":118.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61zg7oydWGL.jpg?v=1785212052"},{"product_id":"johnson-pump-aqua-jet-wps-3-5-gpm-12v-water-pressure-pump-self-priming-diaphragm-pump-10-13395-103","title":"Johnson Pump Aqua Jet WPS 3.5 GPM 12V Water Pressure Pump, Self-Priming Diaphragm Pump 10-13395-103","description":"\u003cp\u003eThe Johnson Pump Aqua Jet WPS 3.5 is a 12 volt, self-priming diaphragm water pressure pump built to deliver quiet, pulsation-free water pressure on both small and medium sized leisure and commercial boats. Its five chamber diaphragm design smooths out flow so the pump runs quietly even at low speeds, making it well suited to onboard shower and galley applications where low amperage draw and low noise are priorities. The pump operates in either fresh or sea water and delivers up to 3.5 gallons per minute with a 41 psi pressure cut-off, powered by an 85 watt, 12 volt motor protected by a 10 amp fuse.\u003c\/p\u003e\u003cp\u003eConstruction pairs a PP\/PPA (polypropylene) pump body with EPDM valves and a Santoprene diaphragm for durability against marine water exposure. The pump is self-priming, simplifying installation in fresh water and shower\/galley plumbing runs. It is recommended to install the pump with an accumulator tank and to always use a PUM Protector inlet strainer ahead of the pump intake to protect the diaphragm and valves from debris. Connections are sized at 3\/8 inch NPT or 1\/2 inch hose, and 1\/2 inch NPT or 3\/4 inch hose, giving flexibility when adapting to existing plumbing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Johnson Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 10-13395-103\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 3.5 Gallons Per Minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Cut-Off:\u003c\/strong\u003e 41 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuse Size:\u003c\/strong\u003e 10 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 85 Watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e 3\/8 inch NPT or 1\/2 inch hose; 1\/2 inch NPT or 3\/4 inch hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Body Material:\u003c\/strong\u003e PP\/PPA (polypropylene)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragm Material:\u003c\/strong\u003e Santoprene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragm Chambers:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePriming:\u003c\/strong\u003e Self-priming\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Compatibility:\u003c\/strong\u003e Fresh or sea water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 9.31 inches L x 8.25 inches W x 4.575 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 10.8 inches L x 7.4 inches W x 5.6 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.21875 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7330717010461\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Johnson Pump 10-13395-103?\u003c\/strong\u003e The Johnson Pump Aqua Jet WPS 3.5, part number 10-13395-103, delivers up to 3.5 gallons per minute with a 41 psi pressure cut-off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump self-priming?\u003c\/strong\u003e Yes, the Aqua Jet WPS 3.5 water pressure pump is self-priming, which simplifies installation in fresh water plumbing runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 10-13395-103 pump run in salt water?\u003c\/strong\u003e Yes, this Johnson Pump water pressure pump operates in either fresh or sea water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Aqua Jet WPS 3.5 pump run on?\u003c\/strong\u003e The 10-13395-103 is a 12 volt pump powered by an 85 watt motor protected by a 10 amp fuse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pump body made of?\u003c\/strong\u003e The Johnson Pump Aqua Jet WPS 3.5 uses a PP\/PPA (polypropylene) pump body with EPDM valves and a Santoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this pump run quietly at low speeds?\u003c\/strong\u003e A five chamber diaphragm design in the Aqua Jet WPS 3.5 smooths out water flow, keeping the pump quiet and pulsation-free even at low speeds, which suits shower and galley applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fittings does the 10-13395-103 use?\u003c\/strong\u003e The pump connects via 3\/8 inch NPT or 1\/2 inch hose on one port, and 1\/2 inch NPT or 3\/4 inch hose on the other.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any accessories to install this pump?\u003c\/strong\u003e Johnson Pump recommends installing the Aqua Jet WPS 3.5 with an accumulator tank and always using a PUM Protector inlet strainer ahead of the pump intake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Johnson Pump 10-13395-103 weigh?\u003c\/strong\u003e The Aqua Jet WPS 3.5 water pressure pump weighs 6.21875 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this water pressure pump?\u003c\/strong\u003e The Johnson Pump 10-13395-103 measures 9.31 inches long by 8.25 inches wide by 4.575 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the Aqua Jet WPS 3.5 pump designed for?\u003c\/strong\u003e This pump is designed for both small and medium sized leisure and commercial boats needing low-amperage, low-noise water pressure delivery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is this pump best suited for?\u003c\/strong\u003e Low amperage draw and low sound levels make the 10-13395-103 particularly suitable for onboard shower and galley water systems.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":49031209779419,"sku":"JON-10-13395-103","price":159.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51ewlgPodRL.jpg?v=1785212052"},{"product_id":"shurflo-pressure-reducing-city-water-entry-valve-183-029-14-wall-mount-chrome-65-psi","title":"Shurflo Pressure Reducing City Water Entry Valve 183-029-14, Wall Mount, Chrome, 65 PSI","description":"\u003cp\u003eThe Shurflo 183-029-14 is a wall-mount, chrome-finish pressure reducing city water entry valve designed to protect an RV or boat's fresh water plumbing from high-pressure municipal or dockside water connections. It threads inline between the shore water hose and the vessel's water inlet, automatically limiting incoming water pressure to 65 PSI so that pumps, fittings, hoses, and fixtures downstream are not subjected to damaging pressure spikes.\u003c\/p\u003e\u003cp\u003eThe valve has a threaded inlet and a threaded outlet, with a 3\/4 inch GHT female swivel inlet connection and a 1\/2 inch NPSM male outlet connection, giving it two total ports. It is built with a metal body and a chrome exterior finish for a durable, corrosion-resistant, leak-tight fit that is stress and crack resistant. A built-in pressure reducing check valve is integrated into the unit, eliminating the need to install a separate inline check valve, and the valve meets or surpasses applicable check valve code requirements.\u003c\/p\u003e\u003cp\u003eBecause the check valve function is built in, this fitting also helps prevent backflow at the city water connection point. It is intended for wall mounting at the water fill location.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 183-029-14\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Pressure Regulated F.W. Fill - Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Pressure Reducing Check Valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Pressure:\u003c\/strong\u003e 65 pounds per square inch (PSI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Wall mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Connection:\u003c\/strong\u003e 3\/4 inch GHT female swivel, threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Connection:\u003c\/strong\u003e 1\/2 inch NPSM male, threaded, 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Ports:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.25 x 4 x 5.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.66875 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 752324002986\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Shurflo 183-029-14 pressure reducing valve do?\u003c\/strong\u003e It limits incoming city or dockside water pressure to 65 PSI before it reaches the RV or boat's fresh water plumbing, protecting pumps, hoses, and fittings from high-pressure damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 183-029-14 include a check valve?\u003c\/strong\u003e Yes, a check valve is built directly into the 183-029-14 pressure reducing valve, so there is no need to install a separate inline check valve at the city water inlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size connections does this valve use?\u003c\/strong\u003e The 183-029-14 has a 3\/4 inch GHT female swivel threaded inlet and a 1\/2 inch NPSM male threaded outlet, with 0.5 inch outlet connection sizing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 183-029-14 mounted to a wall?\u003c\/strong\u003e Yes, this Shurflo unit is designed as a wall-mount fitting for installation at the water fill location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material and finish does the 183-029-14 have?\u003c\/strong\u003e The valve body is metal with a chrome exterior finish, built to be leak-tight and resistant to stress and cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Shurflo 183-029-14 weigh?\u003c\/strong\u003e The 183-029-14 pressure reducing city water entry valve weighs 0.66875 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this fitting?\u003c\/strong\u003e The Shurflo 183-029-14 measures 5.25 x 4 x 5.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this valve meet check valve code requirements?\u003c\/strong\u003e Yes, the 183-029-14 meets or surpasses applicable check valve code requirements thanks to its built-in pressure reducing check valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many ports does the 183-029-14 have?\u003c\/strong\u003e This valve has two ports, one threaded inlet and one threaded outlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 183-029-14?\u003c\/strong\u003e Each order includes one Shurflo 183-029-14 wall-mount, chrome pressure reducing city water entry valve as a single unit.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49031288258779,"sku":"SHU-183-029-14","price":51.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61zcdCRxxPL.jpg?v=1785212758"},{"product_id":"shurflo-piranha-357-106-10-ballast-pump-12v-1100-gph-submersible","title":"Shurflo Piranha 357-106-10 Ballast Pump, 12V 1100 GPH Submersible","description":"\u003cp\u003eThe Shurflo Piranha 357-106-10 is a 12 volt submersible ballast pump built to move water quickly and reliably in marine ballast and water transfer systems. Rated for 1100 GPH (18.33 gallons per minute), it is designed for the fill and drain cycles that wake boats, ski boats, and fishing boats depend on for consistent ballast performance. The pump uses a heavy duty motor paired with a high density nylon housing, giving it the strength to resist impacts and corrosion in both freshwater and saltwater environments over repeated seasons of use.\u003c\/p\u003e\u003cp\u003eA patented anti airlock system automatically clears trapped air from the pump so water flow stays consistent during fill and drain operation, preventing the interruptions that can occur with simpler pump designs. The removable cartridge design lets you access the internal components quickly for cleaning or replacement, cutting down on maintenance downtime. The 357-106-10 is fully submersible and includes a corrosion resistant tinned 6 foot wire lead for a dependable underwater electrical connection. It is ISO 8846 ignition protected, meaning it is certified safe for installation in enclosed engine compartments as well as open bilge and ballast locations on recreational and commercial boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 357-106-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Ballast Pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Submersible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 1100 gallons per hour (18.33 gallons per minute)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 9 inches L x 7 inches W x 3 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon, Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Lead:\u003c\/strong\u003e Tinned, 6 feet, corrosion resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e ISO 8846 ignition protected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e Anti airlock system, removable cartridge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Uses:\u003c\/strong\u003e Fishing boats, ski boats, wake boats, marine water transfer systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Shurflo 357-106-10 ballast pump?\u003c\/strong\u003e The Shurflo 357-106-10 is rated at 1100 gallons per hour, which works out to 18.33 gallons per minute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Shurflo 357-106-10 fully submersible?\u003c\/strong\u003e Yes, the 357-106-10 is a fully submersible ballast pump with a corrosion resistant tinned 6 foot wire lead for reliable underwater electrical connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this ballast pump run on?\u003c\/strong\u003e The 357-106-10 runs on 12 volts DC, matching standard marine 12V electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the anti airlock system on the Piranha ballast pump?\u003c\/strong\u003e It is a patented feature on the Shurflo 357-106-10 that automatically clears trapped air from the pump so water flow stays consistent during ballast fill and drain cycles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I clean or service the pump without replacing the whole unit?\u003c\/strong\u003e The 357-106-10 has a removable cartridge design that allows quick access for cleaning or replacement, reducing maintenance time compared to sealed pump designs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump safe to install in an engine compartment?\u003c\/strong\u003e Yes, the Shurflo 357-106-10 is ISO 8846 ignition protected, which certifies it for safe installation in enclosed engine compartments on recreational and commercial boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing made of?\u003c\/strong\u003e The 357-106-10 uses a high density nylon housing with steel internal components, chosen for resistance to impact and corrosion in both freshwater and saltwater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Shurflo 357-106-10 weigh?\u003c\/strong\u003e This ballast pump weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this ballast pump?\u003c\/strong\u003e The 357-106-10 measures 9 inches long by 7 inches wide by 3 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat types of boats is this ballast pump used on?\u003c\/strong\u003e The Shurflo 357-106-10 is used in ballast and marine water transfer systems on wake boats, ski boats, and fishing boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the wire lead on this pump?\u003c\/strong\u003e The 357-106-10 comes with a 6 foot tinned wire lead built to resist corrosion in underwater installations.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49031288586459,"sku":"SHU-357-106-10","price":73.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41a4JlTr1YL_a4005ed8-0fe4-4c71-aa94-df4cb8a115ab.jpg?v=1785212765"},{"product_id":"shurflo-357-116-10-piranha-ballast-pump-12v-submersible-800-gph","title":"Shurflo 357-116-10 Piranha Ballast Pump, 12V Submersible, 800 GPH","description":"\u003cp\u003eThe Shurflo Piranha Ballast Pump (357-116-10) is a 12V submersible pump built to move water fast and reliably in boat ballast systems. Rated at 800 GPH, it is designed for wake boats, ski boats, fishing boats, and other marine water transfer applications where consistent fill and drain performance matters. The pump uses a heavy duty, water cooled motor for dependable operation and a high density nylon housing that resists impacts, corrosion, and long term exposure to both freshwater and saltwater environments.\u003c\/p\u003e\u003cp\u003eA patented anti airlock system automatically clears trapped air from the pump to maintain steady water flow during ballast fill and drain cycles, preventing the interruptions that can occur with lesser pumps. The removable cartridge design gives quick access for cleaning and replacement, cutting down on maintenance time and keeping the ballast system running efficiently through the boating season. Fully submersible, the pump is equipped with a corrosion resistant tinned 6 ft wire assembly for dependable electrical connections underwater. It is ISO 8846 ignition protected, meaning it is certified safe for installation in engine compartments alongside fuel systems and other ignition sources. This combination of durable construction, anti-airlock technology, and serviceable cartridge design makes the 357-116-10 a practical choice for boaters who need consistent ballast water transfer without frequent pump replacement.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 357-116-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Ballast Pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 800 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 33 Gallons Per Minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Battery Powered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Submersible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic (high density nylon housing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 6 feet (tinned, corrosion resistant)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e ISO 8846\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 752324011902\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Year Manufacturer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Uses:\u003c\/strong\u003e Fishing boats, ski boats, wake boats, marine water transfer systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Shurflo 357-116-10 ballast pump?\u003c\/strong\u003e The Shurflo 357-116-10 Piranha Ballast Pump is rated at 800 GPH, with a maximum flow rate of 33 gallons per minute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 357-116-10 pump fully submersible?\u003c\/strong\u003e Yes, the Shurflo Piranha Ballast Pump 357-116-10 is a fully submersible design built for underwater installation in ballast and marine water systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this ballast pump run on?\u003c\/strong\u003e The 357-116-10 operates on 12 volts DC and is battery powered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 357-116-10 ballast pump safe to install in an engine compartment?\u003c\/strong\u003e Yes, it is ISO 8846 ignition protected, which certifies it for safe installation in engine compartments on recreational and commercial boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing made of?\u003c\/strong\u003e The pump housing is made of high density nylon (plastic) in gray, chosen to withstand impacts, corrosion, and long term exposure to freshwater and saltwater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the wire on the 357-116-10 pump?\u003c\/strong\u003e It comes with a corrosion resistant, tinned 6 foot wire assembly for dependable electrical connections in submerged installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Shurflo Piranha pump have a removable cartridge?\u003c\/strong\u003e Yes, the 357-116-10 features a removable cartridge design that allows quick access for cleaning and replacement, reducing maintenance time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the anti airlock system on this pump?\u003c\/strong\u003e The 357-116-10 uses a patented anti airlock system that automatically clears trapped air to maintain consistent water flow during ballast fill and drain cycles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 357-116-10 ballast pump weigh?\u003c\/strong\u003e The Shurflo 357-116-10 Piranha Ballast Pump weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the warranty on this ballast pump?\u003c\/strong\u003e The 357-116-10 is backed by a 2 year manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the Shurflo 357-116-10 pump designed for?\u003c\/strong\u003e It is designed for fishing boats, ski boats, wake boats, and other marine water transfer systems, including ballast applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 357-116-10 a good replacement pump or only for new installs?\u003c\/strong\u003e The 357-116-10 works as both a new installation pump and a replacement pump, since its removable cartridge design simplifies swapping out a worn unit.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49031288619227,"sku":"SHU-357-116-10","price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41a4JlTr1YL.jpg?v=1785212765"},{"product_id":"shurflo-aqua-king-ii-standard-12v-fresh-water-pump-3-0-gpm-model-4138-111-e65","title":"Shurflo Aqua King II Standard 12V Fresh Water Pump, 3.0 GPM, Model 4138-111-E65","description":"\u003cp\u003eThe Shurflo Aqua King II Standard is a 12 volt DC submersible diaphragm pump built for fresh water plumbing systems on boats and RVs. It delivers a maximum flow rate of 3 gallons per minute and maintains constant water pressure at low flow rates without cycling, shutting off at 30 PSI once system pressure is reached. The pump is self priming and can run dry without damage, making it a reliable choice for onboard water systems where intermittent use and occasional loss of prime are common.\u003c\/p\u003e\u003cp\u003eConstruction features a single-piece, over-molded diaphragm with an internal by-pass for long life and consistent performance. The housing has an electro-coated seamless shell with O-ring sealed end bells, and all wire entries are fully sealed to keep water out of the electrical connections. The pump is ignition protected and includes a thermal breaker for protection against overheating. It ships with fittings and a twist-on inlet strainer for installation. The unit measures 12 inches in length, 6 inches in width, and 5 inches in height, and is finished in beige plastic.\u003c\/p\u003e\u003cp\u003eThis pump is designed for marine plumbing systems and RV plumbing systems, supplying fresh water to sinks, showers, and other onboard fixtures.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4138-111-E65\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Aqua King II Standard F.W. Pump 3.0 GPM - 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 3 gallons per minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-off Pressure:\u003c\/strong\u003e 30 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Style:\u003c\/strong\u003e Submersible, self priming diaphragm pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Beige\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 12 inches long x 6 inches wide x 5 inches high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.925 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Features:\u003c\/strong\u003e Ignition protected, thermally protected with thermal breaker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Fittings and twist-on inlet strainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Uses:\u003c\/strong\u003e Marine plumbing system, RV plumbing system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Warranty:\u003c\/strong\u003e 3 year manufacturer warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 752324012381\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum flow rate of the Shurflo 4138-111-E65?\u003c\/strong\u003e The Shurflo Aqua King II Standard, part number 4138-111-E65, has a maximum flow rate of 3 gallons per minute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this pump run dry without being damaged?\u003c\/strong\u003e Yes, the Aqua King II Standard pump can run dry without damage, which is useful if the water tank runs low or the system loses prime.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 4138-111-E65 pump self priming?\u003c\/strong\u003e Yes, this Shurflo pump is self priming, so it does not need to be manually primed with water before it starts moving fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this water pump require?\u003c\/strong\u003e The Aqua King II Standard pump, model 4138-111-E65, operates on 12 volts DC power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAt what pressure does the pump shut off?\u003c\/strong\u003e The pump shuts off at 30 PSI, which allows it to maintain constant water pressure at low flow rates without cycling on and off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this pump?\u003c\/strong\u003e The Shurflo 4138-111-E65 measures 12 inches in length, 6 inches in width, and 5 inches in height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Aqua King II Standard pump weigh?\u003c\/strong\u003e This pump weighs 4.925 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump ignition protected?\u003c\/strong\u003e Yes, the Shurflo 4138-111-E65 is ignition protected and also includes a thermal breaker for thermal protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the pump?\u003c\/strong\u003e The Aqua King II Standard pump ships with fittings and a twist-on inlet strainer for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pump housing made of and what color is it?\u003c\/strong\u003e The Shurflo 4138-111-E65 is constructed of plastic and finished in beige.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump suitable for both marine and RV use?\u003c\/strong\u003e Yes, the Aqua King II Standard pump is designed for marine plumbing systems as well as RV plumbing systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of warranty comes with this pump?\u003c\/strong\u003e The Shurflo 4138-111-E65 is backed by a 3 year manufacturer warranty.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49031288717531,"sku":"SHU-4138-111-E65","price":162.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/511pVwMZUmL.jpg?v=1785212769"},{"product_id":"shurflo-aqua-king-ii-supreme-12v-fresh-water-pump-4158-153-e75-5-0-gpm-self-priming-demand-pump-55-psi-shut-off","title":"Shurflo Aqua King II Supreme 12V Fresh Water Pump 4158-153-E75, 5.0 GPM Self-Priming Demand Pump, 55 PSI Shut-Off","description":"\u003cp\u003eThe Shurflo Aqua King II Supreme 4158-153-E75 is a 12-volt DC demand water pump built for boats and RVs with multiple water fixtures. It delivers a maximum flow rate of 5 gallons per minute and shuts off at 55 PSI, giving multi-fixture systems steady, home-like shower and faucet pressure instead of the pulsing flow common with lower-capacity pumps. A built-in mechanical bypass function lets the pump operate smoothly at lower flow conditions with minimal cycling, which reduces wear during light-demand draws like a single open faucet.\u003c\/p\u003e\u003cp\u003eThe pump is self-priming to 6 feet, so it can draw water up from a tank below the pump without manual priming. Its housing uses a heavy-duty, seamless shell with an electro-coated motor designed to withstand the marine environment, along with o-ring sealed end bells and fully sealed wire entries to keep moisture out of the electrical connections. Wetted components are built from EPDM, polypropylene (PP), Santoprene, and stainless steel for corrosion resistance and long service life in freshwater transfer applications. The pump measures 12 inches long by 6 inches wide by 6 inches high and is intended for above-ground, general freshwater transfer and marine freshwater pump use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SHURFLO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4158-153-E75\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e EPDM, Polypropylene (PP), Santoprene, Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Above Ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 12 inches L x 6 inches W x 6 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Battery Powered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 5 Gallons Per Minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Pressure:\u003c\/strong\u003e 55 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Priming Lift:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Uses For Product:\u003c\/strong\u003e General Freshwater Transfer, Marine Freshwater Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 752324011865\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum flow rate of the Shurflo 4158-153-E75 pump?\u003c\/strong\u003e The Shurflo Aqua King II Supreme 4158-153-E75 delivers a maximum flow rate of 5 gallons per minute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAt what pressure does this water pump shut off?\u003c\/strong\u003e The 4158-153-E75 has a 55 PSI shut-off pressure, which allows it to maintain steady pressure across multiple open fixtures before cycling off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Shurflo 4158-153-E75 self-priming?\u003c\/strong\u003e Yes, this pump is self-priming to a lift of 6 feet, so it can draw water up from a tank positioned below the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this pump run on?\u003c\/strong\u003e The Aqua King II Supreme 4158-153-E75 is a 12-volt DC pump designed for battery-powered marine and RV systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials are used in the pump's wetted parts?\u003c\/strong\u003e Wetted components are made from EPDM, polypropylene (PP), Santoprene, and stainless steel, chosen for corrosion resistance in freshwater systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 4158-153-E75 weigh?\u003c\/strong\u003e This Shurflo water pump weighs 7.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this pump?\u003c\/strong\u003e The 4158-153-E75 measures 12 inches long by 6 inches wide by 6 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pump handle multi-fixture systems well?\u003c\/strong\u003e Yes, the Aqua King II Supreme 4158-153-E75 is designed for boats with multiple fixtures, providing consistent shower and faucet pressure rather than pulsing flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the built-in bypass function do on this pump?\u003c\/strong\u003e A built-in mechanical bypass function on the 4158-153-E75 lets it operate at lower flow conditions with minimal cycling, reducing wear during light-demand draws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump built to resist corrosion in a marine environment?\u003c\/strong\u003e Yes, the 4158-153-E75 uses a heavy-duty, seamless shell electro-coated motor with o-ring sealed end bells and fully sealed wire entries to withstand marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this pump used for?\u003c\/strong\u003e The Shurflo 4158-153-E75 is intended for general freshwater transfer and as a marine freshwater pump in above-ground installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 4158-153-E75 pump housing?\u003c\/strong\u003e The Aqua King II Supreme 4158-153-E75 has a black housing.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49031288750299,"sku":"SHU-4158-153-E75","price":457.73,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51m5St5-tbL.jpg?v=1785212770"},{"product_id":"shurflo-4158-163-e75-aqua-king-ii-premium-fresh-water-pump-5-0-gpm-24v-dc-marine-rv-demand-pump","title":"Shurflo 4158-163-E75 Aqua King II Premium Fresh Water Pump, 5.0 GPM, 24V DC Marine\/RV Demand Pump","description":"\u003cp\u003eThe Shurflo Aqua King II Premium Fresh Water Pump (4158-163-E75) is a 24-volt DC demand pump built to deliver strong, consistent water pressure on boats and RVs running multiple fixtures at once. It produces up to 5.0 gallons per minute of flow with a 55 PSI shut-off pressure, giving performance closer to a household water system than a typical marine demand pump. The pump uses a 4-chamber diaphragm design that self-primes from a lift of up to 6 feet and can run dry without damage, making it well suited to fresh water tanks that run low or systems with variable suction lines. A built-in mechanical bypass reduces pump cycling at low flow, which cuts down on the rapid on-off chatter common with smaller demand pumps and results in quieter, smoother operation at the tap or shower head.\u003c\/p\u003e\u003cp\u003eConstruction is aimed at marine and RV duty: the motor is electro-coated and the switch is sealed, with ignition protection and thermal overload protection built in, and stainless steel hardware is used throughout for corrosion resistance. Wetted components are EPDM, polypropylene (PP), and Santoprene, with the pump rated to handle water temperatures up to 130 degrees F. It runs on 24 volts DC and is intended for boat cabin freshwater systems, RV plumbing, general water transfer, and camping shower setups where multiple fixtures may draw water at the same time.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4158-163-E75\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Aqua King II Premium Fresh Water Pump 5.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 24 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 5.0 Gallons Per Minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut Off Pressure:\u003c\/strong\u003e 55 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Priming Lift:\u003c\/strong\u003e Up to 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Style:\u003c\/strong\u003e Submersible, 4-chamber diaphragm demand pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Water Temperature:\u003c\/strong\u003e 130 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 10 inches L x 5 inches W x 4.75 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.88125 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e EPDM, Polypropylene (PP), Santoprene, Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multicoloured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Protection:\u003c\/strong\u003e Electro-coated motor, sealed switch, ignition protection, thermal overload protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 752324011896\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Uses:\u003c\/strong\u003e General freshwater transfer, marine freshwater pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fresh water pump for boat cabin and RV freshwater plumbing systems; not vessel- or engine-specific.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat flow rate and pressure does the Shurflo 4158-163-E75 pump deliver?\u003c\/strong\u003e The 4158-163-E75 delivers up to 5.0 gallons per minute of flow with a 55 PSI shut-off pressure, which keeps water pressure steady even when running multiple fixtures at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this pump run on?\u003c\/strong\u003e This Shurflo Aqua King II pump is a 24 volt DC pump, designed for 24-volt marine and RV electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the pump run dry without being damaged?\u003c\/strong\u003e Yes. The 4158-163-E75 uses a 4-chamber diaphragm design that self-primes from up to 6 feet of lift and can run dry without sustaining damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the pump have a mechanical bypass?\u003c\/strong\u003e The built-in mechanical bypass on the Aqua King II reduces pump cycling under low flow conditions, which results in smoother, quieter operation instead of rapid on-off chatter at the tap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature water can this pump handle?\u003c\/strong\u003e The 4158-163-E75 is rated to handle water temperatures up to 130 degrees F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials are used in this pump?\u003c\/strong\u003e The Shurflo Aqua King II pump uses EPDM, polypropylene (PP), and Santoprene for its wetted components, along with stainless steel hardware for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this pump weigh?\u003c\/strong\u003e The Shurflo 4158-163-E75 fresh water pump weighs 7.88125 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the pump?\u003c\/strong\u003e This pump measures 10 inches long by 5 inches wide by 4.75 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump protected against ignition sources and overheating?\u003c\/strong\u003e Yes, the 4158-163-E75 features an electro-coated motor, a sealed switch, ignition protection, and thermal overload protection, making it suitable for marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is this pump designed for?\u003c\/strong\u003e The Aqua King II Premium Fresh Water Pump is designed for boat cabin and RV freshwater plumbing systems, and is also suitable for general water transfer and camping shower setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a submersible pump?\u003c\/strong\u003e Yes, the 4158-163-E75 is a submersible-style demand pump with a 4-chamber diaphragm design.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49031288783067,"sku":"SHU-4158-163-E75","price":478.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51HiCrWj8ML.jpg?v=1785212770"},{"product_id":"ice-eater-submersible-dock-de-icer-with-50-power-cord-available-in-3-4-hp-and-1-hp","title":"Ice Eater Submersible Dock De-Icer with 50' Power Cord - Available in 3\/4 HP and 1 HP","description":"\u003cp\u003eThe Ice Eater submersible dock de-icer protects docks, boat lifts, seawalls, and pilings from ice damage by continuously circulating warmer water from beneath the surface up to the top, disrupting ice formation in a wide area around the unit. Built for reliable cold-weather duty, it runs submerged near the structure you want to protect and is powered through a 50 foot cord, giving you room to keep the power source safely away from the water's edge. Choose the motor size that matches the area you need to keep open: the 3\/4 HP model is well suited to smaller docks and single boat slips, while the 1 HP model moves more water for larger docks, multiple slips, or areas with stronger currents and colder conditions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ice Eater\u003c\/li\u003e\n\u003cli\u003eType: Submersible dock de-icer \/ water agitator\u003c\/li\u003e\n\u003cli\u003ePower cord length: 50 feet\u003c\/li\u003e\n\u003cli\u003eMotor ratings available: 3\/4 HP and 1 HP\u003c\/li\u003e\n\u003cli\u003eApproximate weight: 40-45 pounds depending on model\u003c\/li\u003e\n\u003cli\u003eApplication: Docks, boat lifts, seawalls, pilings, marinas\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis de-icer line is offered in two motor sizes. The 3\/4 HP model (P750-050) is the right choice for smaller docks, single slips, or moderate ice conditions where a compact circulation pattern is enough to keep water open. The 1 HP model (P1000-050) delivers stronger water movement for larger docks, multiple boat slips, or harsher freezing conditions where a wider area of open water is needed. Both versions include a 50 foot power cord and are fully submersible for continuous winter operation. If you are unsure which size fits your dock, sizing up is generally the safer choice in areas with extended freezes or strong currents.\u003c\/p\u003e","brand":"Ice Eater","offers":[{"title":"1 HP","offer_id":49049216581851,"sku":"P-H-P1000-050","price":1126.69,"currency_code":"USD","in_stock":false},{"title":"3\/4 HP","offer_id":49049216614619,"sku":"P-H-P750-050","price":1051.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_e97afe8a-1319-469e-a2ab-5a59786c1cd8.jpg?v=1785455873"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/shu-94-009-10_lg__88481.1580998951.500.750.jpg?v=1785356929","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-pumps-plumbing-sanitation-freshwater-utility-pumps.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}