{"title":"Hoses, Clamps \u0026 Fittings","description":null,"products":[{"product_id":"sierra-shields-bilgeflex-marine-bilge-pump-discharge-hose-available-in-3-4-and-1-1-2-id-black-or-white","title":"Sierra Shields Bilgeflex Marine Bilge Pump Hose - Available in 3\/4\" and 1 1\/2\" ID, 6' to 50' Lengths","description":"\u003cp\u003eThe Sierra Shields Bilgeflex hose is a flexible, corrugated marine hose built for bilge pump discharge and general drain lines aboard a boat. It is constructed of black PVC with a flexible vinyl helix, giving it the corrugated wall that lets it bend tightly without kinking or collapsing while still standing up to abrasion. The hose resists mild chemicals and saltwater, and a clamping cuff molded in every foot of length gives installers a consistent, reinforced point to seat a hose clamp anywhere along the run.\u003c\/p\u003e\u003cp\u003eThis hose line is used primarily for bilge pump discharge, along with other onboard drain runs such as sink, shower, scupper, and livewell drains. It is not intended to be attached to a thru-hull fitting below the waterline. The line is offered in two inside diameters, 3\/4 inch and 1 1\/2 inch, each with its own bend radius and vacuum rating suited to the tighter or larger-volume routing a given drain run requires. Lengths run from a short 6 foot section up to a full 50 foot reel, and the 1 1\/2 inch size is available in black or white so the hose can match the boat's plumbing or interior.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 16-120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PVC with flexible vinyl helix\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black or White (depending on variant)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter:\u003c\/strong\u003e 3\/4 inch (19.1 mm) or 1 1\/2 inch (38.1 mm), depending on variant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Radius:\u003c\/strong\u003e 3\/4 inch (19.1 mm) on the 3\/4 inch hose; 2 inch (50.8 mm) on the 1 1\/2 inch hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVacuum Rating:\u003c\/strong\u003e 20 in. Hg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable Lengths:\u003c\/strong\u003e 6 feet, 50 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Corrugated hose with a clamping cuff every foot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Use:\u003c\/strong\u003e Bilge pump discharge and drain lines (sinks, showers, scuppers, livewells)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e Do not attach to a thru-hull fitting below the waterline\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eStart by matching the Size to the inside diameter your bilge pump outlet or drain fitting requires: 3\/4 inch or 1 1\/2 inch. Next pick the Length that covers your run, 6 feet for a short discharge line or 50 feet for longer runs or multiple installations. On the 1 1\/2 inch hose, also choose a Color, black or white, to suit the boat's existing plumbing.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat sizes does the Sierra Shields Bilgeflex hose come in?\u003c\/strong\u003e The Sierra Shields Bilgeflex hose (Sierra part number stem 16-120) is available in 3\/4 inch and 1 1\/2 inch inside diameter, with lengths of 6 feet or 50 feet depending on the size selected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I pick the right size and length for my boat?\u003c\/strong\u003e Match the Size option to the inside diameter of your bilge pump outlet or drain fitting (3\/4 inch or 1 1\/2 inch), then choose the Length that covers the run from the pump or drain to its discharge point; the Bilgeflex hose is offered in 6 foot and 50 foot lengths to cover both short and long runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hose be used below the waterline on a thru-hull fitting?\u003c\/strong\u003e No, the Bilgeflex hose should not be attached to a thru-hull fitting below the waterline; it is designed for bilge pump discharge and drain lines above that point, such as sinks, showers, scuppers, and livewells.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bilgeflex hose made of?\u003c\/strong\u003e It is made of black PVC with a flexible vinyl helix, a corrugated construction that resists mild chemicals and saltwater while staying flexible enough to route through tight spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a clamp point along the length of the hose?\u003c\/strong\u003e Yes, the Bilgeflex hose has a clamping cuff molded in every foot of its length, so a hose clamp can be seated securely at any point along the run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bend radius of the 3\/4 inch versus the 1 1\/2 inch hose?\u003c\/strong\u003e The 3\/4 inch Bilgeflex hose has a bend radius of 3\/4 inch (19.1 mm), while the 1 1\/2 inch hose has a bend radius of 2 inch (50.8 mm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat vacuum rating does this hose carry?\u003c\/strong\u003e The Sierra Shields Bilgeflex hose line is rated to 20 in. Hg of vacuum across both the 3\/4 inch and 1 1\/2 inch sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1 1\/2 inch hose come in a color other than black?\u003c\/strong\u003e Yes, the 1 1\/2 inch Bilgeflex hose is available in both black and white, letting it match the existing plumbing or interior color scheme.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this hose typically used for on a boat?\u003c\/strong\u003e It is used primarily for bilge pump discharge, as well as other onboard drain lines including sinks, showers, scuppers, and livewells.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 6 foot length only available in one size?\u003c\/strong\u003e Based on the available options, the 6 foot length of the Bilgeflex hose is offered in the 3\/4 inch inside diameter in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the longest Bilgeflex hose option?\u003c\/strong\u003e The longest option in this Sierra Shields Bilgeflex line is a 50 foot length, available in both the 3\/4 inch and 1 1\/2 inch inside diameters.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"3\/4\" \/ 6' Polypac \/ Black","offer_id":48988023029979,"sku":"SIE-116-120-0341B","price":11.55,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ 50' Carton \/ Black","offer_id":48988023062747,"sku":"SIE-16-120-0346B","price":236.18,"currency_code":"USD","in_stock":true},{"title":"1 1\/2\" \/ 50' Carton \/ Black","offer_id":48988023095515,"sku":"SIE-16-120-1126B","price":162.08,"currency_code":"USD","in_stock":true},{"title":"1 1\/2\" \/ 50' Carton \/ White","offer_id":48988023128283,"sku":"SIE-16-120-1126W","price":267.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-116-120-0341B__03356.1722509992.500.750.jpg?v=1785188140"},{"product_id":"sierra-shields-vinylvent-402-marine-blower-hose-available-in-3-and-4-id-10-ft","title":"Sierra Shields Vinylvent Marine Blower Hose - Available in 3 Inch and 4 Inch ID, 10 Foot Length","description":"\u003cp\u003eThe Sierra Shields Vinylvent Blower Hose is a flexible marine ventilation hose used primarily for venting bilge fumes and for blower\/ducting runs in engine compartments. The hose is constructed of black PVC (polyvinyl chloride) supported internally by an anodized wire helix, which keeps the hose round and open while allowing it to flex and route through tight compartments. It is resistant to UV and ozone exposure, making it suitable for the marine environment where hoses are subjected to sun, heat, and engine-bay conditions over time.\u003c\/p\u003e\u003cp\u003eThis hose line is sold in 10 foot lengths and is available in two inside diameters to match different blower and ducting hookups. The hose carries the Sierra part-number stem 16-402 and is a direct replacement or upgrade hose for boats that need to route ventilation ducting between the blower and the bilge or engine compartment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 16-402\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyvinyl Chloride (PVC) with anodized wire helix support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter Range:\u003c\/strong\u003e 3 inch to 4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter Range:\u003c\/strong\u003e 3 1\/8 inch to 4 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Use:\u003c\/strong\u003e Venting bilge fumes and blower ducting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV and Ozone Resistance:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.65 pounds (3 inch) to 0.75 pounds (4 inch)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eChoose the hose that matches the inside diameter of your existing blower fitting or ducting run: the 3 inch ID hose (outside diameter 3 1\/8 inch) or the 4 inch ID hose (outside diameter 4 1\/8 inch). Both sizes ship in 10 foot lengths and are black in color. Measure the inside diameter of the fitting or the hose being replaced before ordering, since the 3 inch and 4 inch versions are not interchangeable.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat sizes does the Sierra Shields Vinylvent blower hose come in?\u003c\/strong\u003e The Sierra 16-402 Vinylvent blower hose is available in a 3 inch inside diameter and a 4 inch inside diameter, both in 10 foot lengths.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this hose used for?\u003c\/strong\u003e It is used primarily for venting bilge fumes and for blower ducting runs in a boat's engine compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the hose resistant to UV and ozone?\u003c\/strong\u003e Yes, the Vinylvent blower hose is resistant to both UV exposure and ozone, which suits it for use in marine engine compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the hose made of?\u003c\/strong\u003e The hose is black PVC (polyvinyl chloride) supported by an anodized wire helix that keeps it round while allowing it to flex.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is each hose?\u003c\/strong\u003e Each Sierra 16-402 Vinylvent hose, in either the 3 inch or 4 inch diameter, is sold in a 10 foot length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outside diameter compared to the inside diameter?\u003c\/strong\u003e The 3 inch ID hose has an outside diameter of 3 1\/8 inch, and the 4 inch ID hose has an outside diameter of 4 1\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the hose weigh?\u003c\/strong\u003e The 3 inch diameter Vinylvent hose weighs 0.65 pounds and the 4 inch diameter version weighs 0.75 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the hose?\u003c\/strong\u003e Both the 3 inch and 4 inch versions of this Sierra Vinylvent blower hose are black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hose be used for engine compartment ventilation?\u003c\/strong\u003e Yes, the Shields Vinylvent hose is designed for venting bilge fumes and ducting airflow in and around the engine compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I pick the right size for my boat?\u003c\/strong\u003e Measure the inside diameter of the existing blower fitting or hose being replaced; choose the 3 inch ID version or the 4 inch ID version of the 16-402 hose to match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part?\u003c\/strong\u003e Yes, this is a Sierra Shields Vinylvent blower hose under part-number stem 16-402, not a generic substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the hose collapse or kink easily when routed through tight spaces?\u003c\/strong\u003e No, the anodized wire helix inside the PVC hose wall keeps the 16-402 Vinylvent hose open and round even when flexed around bends.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"3\" ID x 10'","offer_id":48988027388123,"sku":"SIE-116-402-3003-1","price":10.95,"currency_code":"USD","in_stock":true},{"title":"4\" ID x 10'","offer_id":48988027420891,"sku":"SIE-116-402-4003-1","price":14.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sie-116-402-3003.1__32304.1739463263.500.750.jpg?v=1785188899"},{"product_id":"sierra-18-710-marine-grade-316-stainless-steel-worm-gear-hose-clamps-available-in-sae-010-to-104-9-16-to-7","title":"Sierra Shields Stainless Steel Worm Gear Hose Clamps - Available in 9\/16\" to 7\" Clamping Diameter","description":"\u003cp\u003eSierra's Shields worm gear hose clamps are marine grade clamps built to secure hoses, wire, and cords aboard boats and in other demanding environments. Every clamp in the 18-710 line is manufactured from 316 stainless steel to resist the corrosion that saltwater and engine-bay moisture cause in lesser hardware, and each one uses a worm gear (screw and band) mechanism so the clamp can be tightened down to the exact diameter of the hose or bundle it is securing. This line is sold individually packaged, with each clamp's part number ending in the -2 suffix; buyers who do not need individual packaging can order the same clamp under the base part number without the suffix.\u003c\/p\u003e\u003cp\u003eBecause hose and fitting diameters vary widely across engines, drives, and plumbing runs, this clamp is offered across eight clamping ranges, from 9\/16 inch up to 7 inches, identified by their SAE standard number. Selecting the correct size means matching the outside diameter of the hose (with the clamp in place) to the range printed on the part. Each clamp carries Sierra's standard parts warranty and is designed to meet or exceed the performance of the original hardware it replaces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-710\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Worm Gear Hose Clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Individually packaged (-2 suffix)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (each):\u003c\/strong\u003e 0.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items (each):\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAE Standard Numbers Covered:\u003c\/strong\u003e 010, 012, 016, 020, 032, 048, 072, 104\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamping Diameter Range (full line):\u003c\/strong\u003e 9\/16 inch to 7 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eChoose the Size option that matches the outside diameter of the hose or bundle to be clamped: 9\/16\" to 1-1\/16\" (SAE 010), 9\/16\" to 1-1\/4\" (SAE 012), 1-1\/16\" to 1-1\/2\" (SAE 016), 3\/4\" to 1-3\/4\" (SAE 020), 1-9\/16\" to 2-1\/2\" (SAE 032), 2-9\/16\" to 3-1\/2\" (SAE 048), 3\" to 5\" (SAE 072), or 5\" to 7\" (SAE 104). Measure the hose's outside diameter and pick the range it falls within; each clamp will tighten across its full listed range.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat sizes are available in the Sierra Shields 18-710 hose clamp line?\u003c\/strong\u003e The line spans eight clamping ranges: 9\/16\" to 1-1\/16\" (SAE 010), 9\/16\" to 1-1\/4\" (SAE 012), 1-1\/16\" to 1-1\/2\" (SAE 016), 3\/4\" to 1-3\/4\" (SAE 020), 1-9\/16\" to 2-1\/2\" (SAE 032), 2-9\/16\" to 3-1\/2\" (SAE 048), 3\" to 5\" (SAE 072), and 5\" to 7\" (SAE 104).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know which size clamp to order?\u003c\/strong\u003e Measure the outside diameter of the hose or bundle you need to secure and pick the Sierra 18-710 clamp whose listed range covers that measurement; each SAE size (010 through 104) tightens across its full stated range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are these hose clamps made from?\u003c\/strong\u003e Every clamp in the Sierra 18-710 line is manufactured from 316 stainless steel, chosen for its resistance to corrosion in marine and engine-bay environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these clamps individually packaged?\u003c\/strong\u003e Yes, part numbers in this line carry a -2 suffix, which denotes individual packaging for each clamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I get this clamp without individual packaging?\u003c\/strong\u003e Yes, the same Sierra clamp is available under the base part number without the -2 suffix for buyers who do not need individual packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a worm gear hose clamp used for?\u003c\/strong\u003e A worm gear hose clamp, like the Sierra 18-710 series, uses a screw-and-band mechanism to clamp hoses, wire, or cords securely in place, and is common in marine plumbing and engine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does one of these clamps weigh?\u003c\/strong\u003e Each Sierra 18-710 series clamp weighs 0.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-710 clamp genuine Sierra brand or aftermarket?\u003c\/strong\u003e It is a genuine Sierra brand part, manufactured to meet or exceed the performance of the original hardware it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SAE number on the clamp mean?\u003c\/strong\u003e The SAE standard number (010, 012, 016, 020, 032, 048, 072, or 104) identifies the specific clamping diameter range for that size within the Sierra 18-710 line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan these clamps be used for anything besides hoses?\u003c\/strong\u003e Yes, in addition to hoses the Sierra 18-710 clamps can be used for clamping wire, cords, and similar applications requiring adjustable, secure clamping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many clamps come in one package?\u003c\/strong\u003e Each Sierra 18-710 series package contains one clamp.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"SAE 010 (9\/16\" to 1-1\/16\")","offer_id":48988029944027,"sku":"SIE-18-710-10-2","price":3.37,"currency_code":"USD","in_stock":true},{"title":"SAE 104 (5\" to 7\")","offer_id":48988029976795,"sku":"SIE-18-710-104-2","price":8.41,"currency_code":"USD","in_stock":false},{"title":"SAE 012 (9\/16\" to 1-1\/4\")","offer_id":48988030009563,"sku":"SIE-18-710-12-2","price":3.37,"currency_code":"USD","in_stock":true},{"title":"SAE 016 (1-1\/16\" to 1-1\/2\")","offer_id":48988030042331,"sku":"SIE-18-710-16-2","price":3.37,"currency_code":"USD","in_stock":true},{"title":"SAE 020 (3\/4\" to 1-3\/4\")","offer_id":48988030075099,"sku":"SIE-18-710-20-2","price":3.37,"currency_code":"USD","in_stock":true},{"title":"SAE 032 (1-9\/16\" to 2-1\/2\")","offer_id":48988030107867,"sku":"SIE-18-710-32-2","price":3.75,"currency_code":"USD","in_stock":true},{"title":"SAE 048 (2-9\/16\" to 3-1\/2\")","offer_id":48988030140635,"sku":"SIE-18-710-48-2","price":4.0,"currency_code":"USD","in_stock":true},{"title":"SAE 072 (3\" to 5\")","offer_id":48988030173403,"sku":"SIE-18-710-72-2","price":4.67,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7316_lg__78166.1674845607.500.750.jpg?v=1785188666"},{"product_id":"marine-hose-barb-fitting-3-4in-14-npt-x-1in-hose-corrosion-resistant-brass-replaces-mercruiser-22-807155-glm-13984-sierra-18-4461-cooling-system","title":"Sierra 18-4461 Brass Hose Barb Fitting, 3\/4 Inch NPT x 1 Inch Hose, Replaces Mercruiser 22-807155, GLM 13984","description":"\u003cp\u003eThe Sierra 18-4461 is a corrosion resistant brass hose barb fitting sized 3\/4 inch - 14 NPT threads to a 1 inch hose barb. It is used to connect exhaust manifold plumbing and cooling hose runs, and appears in the Chrysler inboard exhaust manifold parts range alongside related mounting kits, manifold gaskets, spacers, and elbows. The fitting is machined from brass for corrosion resistance in a marine environment, making it suitable for saltwater and freshwater engine cooling and exhaust water circuits where a threaded NPT connection needs to step down to hose.\u003c\/p\u003e\u003cp\u003eThis part is a direct fit replacement for several OEM hose barb numbers used on Mercruiser and GLM applications, letting an installer swap in a Sierra part without hunting down the original manufacturer's fitting. Each Sierra part is built to meet or exceed the original equipment part it replaces. At 0.17 pounds, it is a light, compact brass component intended to thread directly into an existing NPT port.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-4461\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hose Barb Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Machined, corrosion resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/4 inch - 14 NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Barb Size:\u003c\/strong\u003e 1 inch hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1 x 4 x 5.12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.17 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Category:\u003c\/strong\u003e Chrysler Inboard Exhaust Manifolds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e GLM 13984, Mercruiser 22-807155, 22-866725, 22-863804, 22-45084\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eListed within the Chrysler inboard exhaust manifold parts range as a 3\/4 inch NPT to 1 inch hose barb fitting.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eGLM 13984; Mercruiser 22-807155, 22-866725, 22-863804, 22-45084.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Sierra 18-4461 fit?\u003c\/strong\u003e The Sierra 18-4461 has a 3\/4 inch - 14 NPT thread on one end and a 1 inch hose barb on the other, so it steps a threaded NPT port down to a 1 inch hose connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-4461 interchangeable with Mercruiser fittings?\u003c\/strong\u003e Yes, the Sierra 18-4461 is interchangeable with Mercruiser 22-807155, 22-866725, 22-863804, and 22-45084, as well as GLM 13984.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-4461 hose barb made of?\u003c\/strong\u003e It is made of brass with a machined finish, chosen for corrosion resistance in marine cooling and exhaust water circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-4461 weigh?\u003c\/strong\u003e The Sierra 18-4461 brass hose barb weighs 0.17 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-4461 fitting?\u003c\/strong\u003e The Sierra 18-4461 measures 1 x 4 x 5.12 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-4461 work in saltwater applications?\u003c\/strong\u003e Brass construction on the Sierra 18-4461 provides corrosion resistance, making it suitable for marine saltwater and freshwater exhaust and cooling hose connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 18-4461 and the 18-8215 hose barb?\u003c\/strong\u003e Both are corrosion resistant brass 3\/4 inch - 14 NPT fittings, but the 18-4461 barbs to a 1 inch hose while the 18-8215 barbs to a 3\/4 inch hose - they are different SKUs for different hose sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-4461 an OEM part or an aftermarket replacement?\u003c\/strong\u003e The 18-4461 is a Sierra aftermarket part built to meet or exceed the original equipment fittings it replaces, including Mercruiser 22-807155 and GLM 13984.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-4461?\u003c\/strong\u003e You receive one Sierra 18-4461 brass hose barb fitting; no additional mounting hardware or gaskets are included with this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type does the 18-4461 use?\u003c\/strong\u003e The Sierra 18-4461 uses a 3\/4 inch NPT (National Pipe Thread) connection on the threaded end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat application is the 18-4461 used on?\u003c\/strong\u003e The Sierra 18-4461 is listed under Chrysler inboard exhaust manifold parts as a hose barb fitting for exhaust and cooling hose connections.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988198568155,"sku":"SIE-18-4461","price":11.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-4461_lg__60979.1558126801.500.750.jpg?v=1785188317"},{"product_id":"sierra-18-8074-brass-fuel-hose-barb-fitting-3-8-hose-x-1-4-npt-mpn-18-8074","title":"Sierra Hose Barb 18-8074, 3\/8 Inch Brass Fitting for Marine Fuel Lines","description":"\u003cp\u003eThe Sierra 18-8074 is a 3\/8 inch hose barb fitting used as a component in marine fuel line assemblies. It is machined from brass with a gold finish for corrosion resistance in the marine environment. This hose barb is sold separately, meaning it is not bundled with a primer bulb or a complete fuel line hose; it is intended for buyers building or repairing a fuel line assembly who need the barb fitting on its own.\u003c\/p\u003e\u003cp\u003eSierra engineers its parts to meet the demands of high horsepower marine engines and to hold up under harsh marine conditions. Sierra states that its products meet or exceed the original equipment part they replace, and the company supplies OEM engine manufacturers and boat builders with parts on a daily basis. The 18-8074 carries the Sierra part number molded or stamped into the fitting for easy identification when ordering replacements.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8074\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hose Barb Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Gold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 28 inches L x 2 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282368913\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold Separately:\u003c\/strong\u003e Yes, hose barb only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis hose barb is a 3\/8 inch fitting used in marine fuel line assemblies; check your existing fuel line assembly's hose barb size before ordering.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part number.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sierra 18-8074 hose barb?\u003c\/strong\u003e The Sierra 18-8074 is a 3\/8 inch hose barb fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-8074 come with a fuel line or primer bulb?\u003c\/strong\u003e No, the Sierra 18-8074 is sold separately as just the hose barb fitting, without a fuel line hose or primer bulb included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-8074 hose barb made of?\u003c\/strong\u003e It is made of brass, which resists corrosion in marine fuel system use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does the 18-8074 have?\u003c\/strong\u003e The Sierra 18-8074 hose barb has a gold finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-8074 weigh?\u003c\/strong\u003e The Sierra 18-8074 hose barb weighs 0.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-8074?\u003c\/strong\u003e The UPC for the Sierra 18-8074 hose barb is 808282368913.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-8074 used for?\u003c\/strong\u003e It is a hose barb fitting used as a connection point in marine fuel line assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8074 genuine Sierra or an aftermarket copy?\u003c\/strong\u003e It is a genuine Sierra part, part number 18-8074, and Sierra states its products meet or exceed the original equipment part they replace.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-8074 hose barb?\u003c\/strong\u003e The listed product dimensions for the Sierra 18-8074 are 28 inches long by 2 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8074 hose barb interchangeable with other sizes?\u003c\/strong\u003e The 18-8074 is specifically a 3\/8 inch barb; confirm your fuel line assembly requires a 3\/8 inch hose barb before ordering.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432597211,"sku":"SIE-18-8074","price":5.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8074_lg__95432.1558131173.500.750.jpg?v=1785188527"},{"product_id":"sierra-18-8055-brass-hose-barb-fitting-5-16-barb-x-1-4-npt-male-replaces-mercury-22-63187-omc-173311-yamaha-aba-fline-ba-rb","title":"Sierra 18-8055 Brass Hose Barb - Replaces Mercury 22-63187, 5\/16 Inch Barb x 1\/4 Inch NPT","description":"\u003cp\u003eThe Sierra 18-8055 is a brass hose barb fitting used to connect fuel line to a primer bulb or fuel connection on outboard motor fuel systems. It features a 5\/16 inch barb end for the hose side and a 1\/4 inch NPT male thread on the fitting side, allowing a secure, leak-resistant connection between a barbed fuel hose and a threaded fuel component. The fitting is machined from brass with a gold-tone finish for corrosion resistance in a marine fuel-system environment.\u003c\/p\u003e\u003cp\u003eThis part is a direct equivalent to Mercury Marine part number 22-63187, making it a straightforward replacement when an original fitting has worn, cracked, or stripped threads. It is sold as a single hose barb fitting measuring 5 x 3 x 1 inches and weighing 0.07 pounds, and is built to Sierra's standard marine parts quality.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8055\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Size:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Barb, Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5 x 3 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Mercury Marine applications using the 22-63187 fuel fitting.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury Marine 22-63187\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-8055 hose barb replace?\u003c\/strong\u003e It is a direct equivalent to Mercury Marine part number 22-63187, so it can be used wherever that original fitting is called for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose and thread does this fitting use?\u003c\/strong\u003e The 18-8055 has a 5\/16 inch barb end for the fuel hose and a 1\/4 inch NPT male thread on the opposite end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 18-8055 fitting made of?\u003c\/strong\u003e It is machined brass with a gold-tone finish, chosen for corrosion resistance in marine fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8055 a male or female connector?\u003c\/strong\u003e The NPT thread end of the Sierra 18-8055 is male.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-8055 hose barb weigh?\u003c\/strong\u003e It weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this hose barb?\u003c\/strong\u003e The 18-8055 measures 5 x 3 x 1 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fittings come in a package?\u003c\/strong\u003e The Sierra 18-8055 is sold as a single hose barb fitting, unit count of 1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part or a generic aftermarket fitting?\u003c\/strong\u003e Part number 18-8055 is a genuine Sierra-manufactured fitting, engineered as an equivalent to the Mercury Marine 22-63187 rather than a generic substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this fitting typically used for?\u003c\/strong\u003e It is used to connect a barbed fuel hose to a threaded fuel line component, such as a primer bulb connection, on an outboard fuel system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 18-8055 different from the 18-8054?\u003c\/strong\u003e The 18-8055 has a 1\/4 inch NPT thread, while the related 18-8054 uses a 1\/8 inch NPT thread; both share the same 5\/16 inch barb size.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432629979,"sku":"SIE-18-8055","price":6.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8055_lg__46913.1558133133.500.750.jpg?v=1785188322"},{"product_id":"sierra-18-8108-marine-fuel-hose-barb-fitting-3-8-barb-x-3-8-npt-male-connector","title":"Sierra 18-8108 Marine Fuel Hose Barb Fitting, 3\/8 Inch x 3\/8 Inch Male","description":"\u003cp\u003eThe Sierra 18-8108 is a machined male hose barb fitting sized 3\/8 inch by 3\/8 inch, built for marine fuel system plumbing where a secure, leak-resistant connection between fuel hose and a threaded fitting or fuel component is required. It has a male connection type with a 3\/8 inch (9.53mm) barb on one end and a 3\/8 inch (9.53mm) NPT thread on the other, letting it join standard 3\/8 inch marine fuel hose to a 3\/8 inch NPT port. The barbed end is designed to grip hose securely when paired with the correct hose clamp, resisting slippage and fuel leaks under engine vibration and pressure changes typical of a marine fuel system.\u003c\/p\u003e\u003cp\u003eSierra engineers its marine parts to meet or exceed the performance of the original equipment they replace, and this hose barb is manufactured to the same standard, making it a dependable choice for fuel line repairs, replacements, or new fuel system builds on boats. Its compact size (0.39 x 0.39 x 0.39 inches) and light weight make it easy to fit into tight engine compartments and existing fuel line routing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8108\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hose Barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Size:\u003c\/strong\u003e 3\/8 inch (9.53mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type:\u003c\/strong\u003e Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNPT Size:\u003c\/strong\u003e 3\/8 inch (9.53mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282125615\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sierra 18-8108 hose barb?\u003c\/strong\u003e The Sierra 18-8108 is a 3\/8 inch by 3\/8 inch fitting, with a 3\/8 inch (9.53mm) barb end and a 3\/8 inch (9.53mm) NPT male thread on the other end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8108 a male or female fitting?\u003c\/strong\u003e It is a male connection type fitting, designed to thread into a female NPT port while the opposite end accepts hose over its barbed profile.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does this barb fit?\u003c\/strong\u003e The barbed end of the Sierra 18-8108 is sized for 3\/8 inch marine fuel hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material or finish is the Sierra 18-8108 hose barb?\u003c\/strong\u003e The Sierra 18-8108 has a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-8108 weigh?\u003c\/strong\u003e This hose barb weighs 0.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-8108 fitting?\u003c\/strong\u003e Product dimensions are 0.39 x 0.39 x 0.39 inches, a compact size intended for tight engine compartment fuel line routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a hose clamp with the Sierra 18-8108?\u003c\/strong\u003e Yes, a hose clamp should be used over the barbed end to secure the fuel hose and prevent slippage or leaks, since the fitting itself is a barb, not a clamped or threaded hose connector on that end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8108 genuine Sierra or aftermarket?\u003c\/strong\u003e The 18-8108 is manufactured by Sierra and built to meet or exceed the performance of the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Sierra 18-8108 be used for fuel system repairs?\u003c\/strong\u003e Yes, this 3\/8 inch by 3\/8 inch male hose barb is intended for marine fuel system plumbing, including fuel line repairs and replacements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat NPT thread size does the 18-8108 use?\u003c\/strong\u003e The threaded end of the Sierra 18-8108 is a 3\/8 inch (9.53mm) NPT male thread.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432924891,"sku":"SIE-18-8108","price":5.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-8108__93331.1722346667.500.750.jpg?v=1785189103"},{"product_id":"sierra-18-8109-hose-barb-fitting-5-16-in-barb-x-3-8-in-npt-male-marine-fuel-water-line-connector","title":"Sierra Hose Barb 5\/16 Inch Barb x 3\/8 Inch NPT Male, 18-8109","description":"\u003cp\u003eThe Sierra 18-8109 is a hose barb fitting built to connect marine hose to a 3\/8 inch male NPT threaded port. One end of the fitting is a 5\/16 inch barb designed to grip hose securely under vibration and pressure, while the opposite end threads directly into a fitting or component using standard 3\/8 inch NPT male threads. It is manufactured with a machined finish for a consistent, leak-resistant seal at both the hose connection and the threaded joint.\u003c\/p\u003e\u003cp\u003eThis fitting is used wherever a boat's plumbing, fuel, or cooling system needs to transition from hose to a threaded NPT port, and it is sized to work with 5\/16 inch inside diameter hose. Sierra engineers its parts to meet or exceed the performance of the original equipment they replace, and the company supplies OEM engine manufacturers and boat builders with parts on a daily basis, so the 18-8109 is built to the same demands as factory-installed hardware. Its compact dimensions and single-piece construction make it a straightforward, drop-in solution for hose-to-threaded-port connections in the engine compartment or fuel and cooling lines.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8109\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Size:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/8 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type:\u003c\/strong\u003e Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal hose barb fitting sized for 5\/16 inch hose and 3\/8 inch NPT male threaded ports; not restricted to a specific engine or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Sierra 18-8109 fit?\u003c\/strong\u003e The Sierra 18-8109 has a 5\/16 inch barb end, so it is sized for hose with a 5\/16 inch inside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread does the other end of the 18-8109 use?\u003c\/strong\u003e The opposite end of the 18-8109 is a 3\/8 inch male NPT thread, allowing it to screw directly into a threaded port or fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8109 a straight fitting or an elbow?\u003c\/strong\u003e The 18-8109 is a straight hose barb, transitioning in a single line from the 5\/16 inch barb to the 3\/8 inch NPT male thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 18-8109 made from and how is it finished?\u003c\/strong\u003e The 18-8109 has a machined exterior finish, giving it precise, consistent threads and a tight seal at both connection points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-8109 weigh?\u003c\/strong\u003e The 18-8109 weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-8109 hose barb?\u003c\/strong\u003e The Sierra 18-8109 measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-8109 come with any other hardware?\u003c\/strong\u003e The 18-8109 ships as a single hose barb fitting with no additional hardware included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-8109 fit any boat with a 3\/8 inch NPT port?\u003c\/strong\u003e Yes, the 18-8109 is a universal fitting sized to any 3\/8 inch NPT male threaded port paired with 5\/16 inch hose, rather than being limited to one specific engine or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra's 18-8109 built to OEM standards?\u003c\/strong\u003e Sierra engineers the 18-8109 to meet or exceed the performance of the original equipment part it replaces, using the same quality standards Sierra supplies to OEM engine manufacturers and boat builders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-8109 be used on fuel lines as well as cooling lines?\u003c\/strong\u003e The 18-8109 hose barb is a general-purpose fitting for connecting 5\/16 inch hose to a 3\/8 inch NPT male port, suitable wherever that hose-to-thread transition is needed on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many 18-8109 fittings come in a package?\u003c\/strong\u003e The Sierra 18-8109 is sold as a single unit, one hose barb per package.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988433187035,"sku":"SIE-18-8109","price":5.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sie-18-8109_lg__97950.1637356383.500.750.jpg?v=1785188951"},{"product_id":"oetiker-stepless-ear-clamp-35-64-in-14mm-replaces-oem-oetiker-16700012-omc-346931-stainless-steel-pkg-of-10","title":"Sierra Oetiker Clamp 18-9132-9, 9\/16 Inch (14.5mm), Stainless Steel, Pack of 10, Replaces Oetiker 16700013 OMC 346785","description":"\u003cp\u003eThe Sierra 18-9132-9 is a stainless steel Oetiker-style clamp sized for 9\/16 inch (14.5mm) nominal hose diameter, sold as a pack of 10. This clamp style uses a single-ear pinch design rather than a screw-adjustable band, giving a consistent, uniform clamping force around the hose circumference with no protruding screw head to snag on surrounding components. Stainless steel construction resists corrosion in the wet, salt-exposed environments typical of marine engine compartments and bilges, making this clamp suitable for fuel lines, coolant lines, and other small-diameter hose connections where a low-profile, vibration-resistant seal is needed. Because the fit is universal to the stated hose diameter rather than tied to one engine or drive model, the 18-9132-9 works across a wide range of applications calling for a 9\/16 inch (14.5mm) Oetiker-type clamp. Each clamp measures 0.39 x 0.39 x 0.39 inches and weighs a fraction of a pound, so a full pack of 10 adds negligible weight to a parts inventory or toolbox. This part directly corresponds to the OEM Oetiker and OMC clamp numbers listed below, so it can be used as a like-for-like replacement when those original clamps need to be swapped out.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-9132-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Inside Diameter:\u003c\/strong\u003e 9\/16 inch (14.5mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10 clamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e Oetiker 16700013, OMC 346785\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for hose connections with a 9\/16 inch (14.5mm) nominal inside diameter.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOetiker 16700013\u003c\/li\u003e\n\u003cli\u003eOMC 346785\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Sierra 18-9132-9 clamp fit?\u003c\/strong\u003e The 18-9132-9 is sized for a 9\/16 inch (14.5mm) nominal inside diameter hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many clamps come in a pack?\u003c\/strong\u003e Each package of the Sierra 18-9132-9 contains 10 clamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-9132-9 clamp made from?\u003c\/strong\u003e It is made from stainless steel, chosen for corrosion resistance in wet and salt-exposed environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-9132-9 an OEM part or an aftermarket replacement?\u003c\/strong\u003e It is a Sierra-manufactured clamp that serves as a direct replacement for the equivalent Oetiker and OMC clamps, cross-referencing to Oetiker 16700013 and OMC 346785.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does this clamp replace?\u003c\/strong\u003e The 18-9132-9 replaces Oetiker 16700013 and OMC 346785.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-9132-9 fit a specific engine or boat model?\u003c\/strong\u003e It is a universal-fit clamp sized to a 9\/16 inch (14.5mm) hose diameter rather than being tied to a specific engine or boat model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of clamp design is the 18-9132-9?\u003c\/strong\u003e It uses an Oetiker-style single-ear pinch design that provides uniform clamping pressure without a protruding screw head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of a single 18-9132-9 clamp?\u003c\/strong\u003e Each clamp measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a pack of 18-9132-9 clamps weigh?\u003c\/strong\u003e A pack of the Sierra 18-9132-9 clamps weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is the 18-9132-9 clamp suited for?\u003c\/strong\u003e Its 9\/16 inch (14.5mm) sizing and stainless steel construction make it suitable for small-diameter fuel line, coolant line, and similar hose connections in marine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-9132-9 clamp?\u003c\/strong\u003e The clamp is white in color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-9132-9 be re-tightened after installation like a screw clamp?\u003c\/strong\u003e No, the Oetiker-style single-ear design of the 18-9132-9 is pinched closed during installation and is not designed to be re-adjusted like a screw-band clamp.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988436463835,"sku":"SIE-18-9132-9","price":13.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2__43133.1770239764.500.750.jpg?v=1785188722"},{"product_id":"sea-dog-plugmate-garboard-drain-plug-wrench-with-bronze-replacement-plug-fits-standard-t-style-plugs-520045-1","title":"Sea-Dog Plugmate Garboard Plug Wrench with Replacement Plug, Fits Standard and T-Style Garboard Plugs, 520045-1","description":"\u003cp\u003eThe Sea-Dog Plugmate garboard plug wrench (520045-1) is a multi-key tool built to remove and install garboard drain plugs during haul-out and winterizing. Its multiple deck keys are shaped to fit standard garboard plugs as well as \"T\" style plugs, so one wrench covers both common plug styles found on boat hulls, including Sea-Dog garboard plugs 520041 and 520043. The wrench body is constructed of durable injection molded polycarbonate, paired with a machined bronze plug for corrosion resistance where it contacts the drain fitting. The 520045-1 version stores one replacement garboard plug directly inside the wrench handle, so a spare plug is always on hand if the original is lost or damaged during haul-out. This differs from the base 520045 wrench, which is sold as wrench-only with no plug included. Custom colors are available upon request from the manufacturer. This tool is intended for general boat maintenance use around the garboard drain and is not specific to any single boat make, model, or engine.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520045-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Garboard Plug Wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Polycarbonate Handle with Machined Bronze Plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e One Replacement Garboard Plug Stored in Handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Standard and T-Style Garboard Plugs, Including Sea-Dog 520041 and 520043\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.262 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514521512\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 520045-1 used for?\u003c\/strong\u003e The Sea-Dog 520045-1 is a Plugmate garboard plug wrench used to remove and install garboard drain plugs, most commonly during haul-out when draining the bilge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 520045-1 include a replacement plug?\u003c\/strong\u003e Yes, the 520045-1 stores one replacement garboard plug inside the wrench handle, unlike the base 520045 wrench which is sold without a plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 520045 and 520045-1?\u003c\/strong\u003e The 520045 is the wrench only with no plug included, while the 520045-1 comes with one replacement garboard plug stored in the handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat styles of garboard plugs does this wrench fit?\u003c\/strong\u003e The Sea-Dog Plugmate wrench fits standard garboard plugs as well as \"T\" style plugs, including Sea-Dog garboard plugs 520041 and 520043.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the wrench made of?\u003c\/strong\u003e The 520045-1 wrench handle is constructed of durable injection molded polycarbonate, and it comes with a machined bronze plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 520045-1 weigh?\u003c\/strong\u003e The Sea-Dog 520045-1 garboard plug wrench weighs 0.262 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 520045-1 wrench be ordered in different colors?\u003c\/strong\u003e Custom colors for the Sea-Dog Plugmate wrench (520045-1) are available upon request.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the wrench have multiple deck keys?\u003c\/strong\u003e Yes, the Plugmate 520045-1 features multiple deck keys designed to work with various garboard plug styles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the replacement plug included with the 520045-1 removable?\u003c\/strong\u003e The replacement plug included with the 520045-1 is stored in the wrench handle, ready to use as a spare when the installed garboard plug needs replacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 520045-1?\u003c\/strong\u003e The 520045-1 package includes the Plugmate garboard wrench with one replacement garboard plug stored in the handle.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825452763,"sku":"S-D-520045-1","price":14.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5247.jpg?v=1784429711"},{"product_id":"sea-dog-520060-1-captive-garboard-drain-plug-316-stainless-steel-replaces-bronze-520040-520042","title":"Sea-Dog Captive Garboard Drain \u0026 Plug 520060-1, 316 Stainless Steel, Replaces 520040\/520042","description":"\u003cp\u003eThe Sea-Dog Captive Garboard Drain \u0026amp; Plug (520060-1) is a boat hull garboard drain and plug assembly built from investment cast 316 stainless steel for strong resistance to saltwater corrosion. It is designed as a direct replacement for the bronze, traditional style Sea-Dog Garboard drains 520040 and 520042, giving boat owners a corrosion-resistant upgrade path for an existing hull fitting.\u003c\/p\u003e\u003cp\u003eThe plug is captive to the drain housing, so it cannot be dropped or lost overboard when opened to drain the bilge or closed to keep water out while underway. The assembly measures 2 inches, 1-1\/8 inches, 1\/2 inch, and 2-5\/8 inches across its key mounting points and installs with three #8 flat head fasteners (fasteners not included). Replacement plug-and-gasket and gasket-only parts are also available separately for ongoing maintenance of this drain.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520060-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Captive Garboard Drain \u0026amp; Plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #8 FH (flat head), 3 required (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 2-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.338 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 4.7 cm (L) x 9.7 cm (W) x 13.8 cm (H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514521550\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e520040\u003c\/li\u003e\n\u003cli\u003e520042\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 520060-1 made of?\u003c\/strong\u003e Investment cast 316 stainless steel makes up the Sea-Dog Captive Garboard Drain \u0026amp; Plug (520060-1), giving it strong resistance to saltwater corrosion compared to older bronze designs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the plug stay attached to the drain housing?\u003c\/strong\u003e Yes, the 520060-1 uses a captive plug design, so the plug cannot be separated and lost overboard when it is opened for draining.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sea-Dog 520060-1 replace?\u003c\/strong\u003e This part is a direct replacement for the bronze, traditional style Sea-Dog Garboard drains 520040 and 520042.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this garboard drain?\u003c\/strong\u003e The Sea-Dog Captive Garboard Drain \u0026amp; Plug, part number 520060-1, measures 2 inches, 1-1\/8 inches, 1\/2 inch, and 2-5\/8 inches across its key mounting points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 520060-1 installed?\u003c\/strong\u003e Three #8 flat head fasteners secure the drain and plug in place on the hull; the fasteners are not included with the 520060-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this part weigh?\u003c\/strong\u003e 0.338 pounds is the weight of the Sea-Dog Captive Garboard Drain \u0026amp; Plug, part number 520060-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the round and oblong Sea-Dog garboard drains?\u003c\/strong\u003e The 520060-1 is the standard captive garboard drain and plug, while the separate Oblong Captive Garboard Drain \u0026amp; Plug (520065-1) sits lower in the stern for more water removal; these are distinct part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre replacement plugs or gaskets available separately for this drain?\u003c\/strong\u003e Yes, a replacement plug and gasket set and a gasket-only option are sold separately for use with the Sea-Dog Captive Garboard Drain \u0026amp; Plug 520060-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this drain plug genuine Sea-Dog or aftermarket?\u003c\/strong\u003e This is a genuine Sea-Dog product, part number 520060-1, made as the stainless steel upgrade to Sea-Dog's earlier bronze garboard drains.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 520060-1?\u003c\/strong\u003e The Sea-Dog 520060-1 includes the captive garboard drain housing with its attached plug; the three #8 flat head mounting fasteners are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this drain fit any boat hull?\u003c\/strong\u003e The Sea-Dog Captive Garboard Drain \u0026amp; Plug (520060-1) is a hull fitting that mounts with three #8 flat head fasteners and is not tied to a specific boat make or model.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825714907,"sku":"S-D-520060-1","price":23.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8085.jpg?v=1784429720"},{"product_id":"sea-dog-520290-1-drain-tube-flaring-tool-for-1-brass-and-aluminum-drain-tubes","title":"Sea-Dog Drain Tube Flaring Tool, 1 Inch, Stainless Steel\/Zinc Plated Steel - 520290-1","description":"\u003cp\u003eThe Sea-Dog Drain Tube Flaring Tool (520290-1) is a purpose-built hand tool for installing 1 inch drain tubes on boats. It is used to flare the end of a drain tube so it seats and seals properly in motor wells, livewells, baitwells, and other bulkhead drain applications. The tool works with all Sea-Dog Drain Tubes in the 520210-520430 range, making it a handy, compact addition to any boat toolbox or rigging kit.\u003c\/p\u003e\u003cp\u003eConstructed of stainless steel and zinc plated steel for corrosion resistance in a marine environment, this flaring tool is sized specifically for 1 inch diameter drain tube installations. A companion tool (520295-1, a separate part number) is sized for 1-1\/4 inch tubes, so it is important to select the 520290-1 for 1 inch tube work. Note that the drain tube itself is not included with this tool.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520290-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Drain Tube Flaring Tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\/Zinc Plated Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Dimension A):\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength (Dimension B):\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.544 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514521833\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Drain Tubes:\u003c\/strong\u003e Sea-Dog Drain Tubes 520210 through 520430\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size drain tube does the Sea-Dog 520290-1 flaring tool install?\u003c\/strong\u003e The Sea-Dog 520290-1 is sized for installing 1 inch drain tubes. A separate tool, the 520295-1, is sized for 1-1\/4 inch drain tubes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the drain tube included with this flaring tool?\u003c\/strong\u003e No, the drain tube is not included. The 520290-1 is the flaring tool only, used to install a 1 inch drain tube that is purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this tool made of?\u003c\/strong\u003e It is made of stainless steel and zinc plated steel, materials chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sea-Dog drain tubes can I install with the 520290-1?\u003c\/strong\u003e The 520290-1 flaring tool can be used to install any Sea-Dog Drain Tube in the 520210-520430 range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 520290-1 flaring tool weigh?\u003c\/strong\u003e It weighs 0.544 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the flaring tool?\u003c\/strong\u003e The 520290-1 measures 1 inch (dimension A) by 4 inches (dimension B).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 520290-1 and the 520295-1?\u003c\/strong\u003e The 520290-1 is sized for 1 inch drain tubes, while the 520295-1 is a separate part number sized for 1-1\/4 inch drain tubes. Choose the tool that matches the tube size you are installing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a drain tube flaring tool used for?\u003c\/strong\u003e A drain tube flaring tool, such as the Sea-Dog 520290-1, is used to flare the end of a drain tube during installation so it forms a proper seal in a bulkhead or hull opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this tool be used for boat motor well or livewell drains?\u003c\/strong\u003e Yes, the Sea-Dog 520290-1 is used to install drain tubes that remove water from motor wells, livewells, and baitwells.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 520290-1 a genuine Sea-Dog product?\u003c\/strong\u003e Yes, it is a genuine Sea-Dog part, identified by manufacturer part number 520290-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 520290-1 packaged?\u003c\/strong\u003e The Sea-Dog 520290-1 flaring tool ships as a standard pack of 1 each.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988826173659,"sku":"S-D-520290-1","price":25.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7176.jpg?v=1784429764"},{"product_id":"sea-dog-520230-1-formed-brass-drain-tube-1-id-x-2-7-8-transom-livewell-baitwell-motorwell-drain","title":"Sea-Dog Brass Drain Tube, 1 Inch x 2-7\/8 Inch, Part 520230-1","description":"\u003cp\u003eThe Sea-Dog Brass Drain Tube, part number 520230-1, is a formed brass drain fitting designed for transom, motorwell, livewell, and baitwell drain applications on boats. The tube is flanged 90 degrees on one end, which allows it to seat cleanly into the hull or compartment wall while directing water flow out through the opposite straight end. It is built for use with brass or stainless steel drain plugs, making it a common component in boat drain plug systems where a plug threads into the flanged end to seal the opening when not draining.\u003c\/p\u003e\u003cp\u003eThis drain tube has a 1 inch inside diameter and measures 2-7\/8 inches (dimension B) in length, with a formed brass construction that resists corrosion in marine environments. Installation requires a Drain Tube Flaring Tool (520290-1 or 520295-1), which is used to flare the tube end during fitting. The 1 inch diameter size shown here is part of a broader Sea-Dog Formed Drain Tube lineup that is also available in a 1-1\/4 inch diameter, so boat owners should confirm the correct inside diameter for their existing drain plug or fitting before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520230-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength (Dimension B):\u003c\/strong\u003e 2-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.108 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Formed brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Style:\u003c\/strong\u003e 90 degree flanged on one end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Drain Plug Types:\u003c\/strong\u003e Brass or stainless steel drain plugs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired Installation Tool:\u003c\/strong\u003e Drain Tube Flaring Tool (520290-1 or 520295-1)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for transom, motorwell, livewell, and baitwell drain applications; universal fit based on 1 inch inside diameter rather than a specific boat make or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the inside diameter of the Sea-Dog 520230-1 drain tube?\u003c\/strong\u003e The Sea-Dog 520230-1 drain tube has a 1 inch inside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this drain tube?\u003c\/strong\u003e Part number 520230-1 measures 2-7\/8 inches, which is the tube's B dimension from the flanged end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog drain tube made from?\u003c\/strong\u003e It is constructed of formed brass, giving it corrosion resistance for marine drain applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this drain tube used for?\u003c\/strong\u003e Sea-Dog part 520230-1 is used as a drain for transom, motorwell, livewell, or baitwell applications on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this drain tube work with any drain plug?\u003c\/strong\u003e The 520230-1 drain tube is designed for use with brass or stainless steel drain plugs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a special tool to install this drain tube?\u003c\/strong\u003e Yes, installation of the Sea-Dog 520230-1 requires a Drain Tube Flaring Tool, either part 520290-1 or 520295-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the drain tube flanged on both ends?\u003c\/strong\u003e No, the 520230-1 is flanged 90 degrees on only one end; the other end is straight for flaring during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this drain tube available in other sizes?\u003c\/strong\u003e Sea-Dog offers this formed drain tube design in 1 inch and 1-1\/4 inch diameters; part 520230-1 is the 1 inch by 2-7\/8 inch version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 520230-1 drain tube weigh?\u003c\/strong\u003e This drain tube weighs 0.108 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does this drain tube have?\u003c\/strong\u003e The 520230-1 has a natural brass finish, consistent with its formed brass construction.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988826271963,"sku":"S-D-520230-1","price":5.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5268.jpg?v=1784429771"},{"product_id":"sea-dog-520320-1-hdpe-motorwell-drain-tube-1-hole-adjustable-3-4-to-2-1-2-bulkhead-white","title":"Sea-Dog Drain Tube 520320-1, HDPE, White, Adjustable for Motorwell, Livewell, and Baitwell Drains","description":"\u003cp\u003eThe Sea-Dog Drain Tube (520320-1) removes water and other fluids from motor wells, livewells, and baitwells, giving boat owners a simple, leak-proof way to keep these compartments dry. It is constructed of durable, impact-resistant injection molded HDPE, a material chosen for its resistance to cracking and corrosion in the wet, high-exposure environments where drain fittings are used.\u003c\/p\u003e\u003cp\u003eThe tube is flanged 90 degrees on one end and is designed to fit standard 1 inch diameter mounting holes, giving it a clean, finished look once installed. Its adjustable length accommodates bulkhead installations ranging from 3\/4 inch up to 2-1\/2 inches thick, so it fits a range of deck and hull thicknesses without needing to be cut or modified. A locking drain tube nut threads down to create a tight, leak-proof seal against the bulkhead, and because the tube telescopes to length, no flaring tools are needed during installation, which saves setup time compared to fixed-length tubing.\u003c\/p\u003e\u003cp\u003eThis drain tube is designed for use with snap handle and T-handle drain plugs, making it a straightforward fit for common livewell and baitwell drain plug setups. It is finished in white; Sea-Dog also offers this same drain tube design in black ABS for buyers who want a different material or color to match their boat's fittings.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520320-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE (High-Density Polyethylene)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulkhead Thickness Range:\u003c\/strong\u003e 3\/4 inch to 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall Thickness:\u003c\/strong\u003e 0.110 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.044 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520560\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 520320-1 drain tube used for?\u003c\/strong\u003e It removes water and other fluids from motor wells, livewells, and baitwells, draining them through a standard 1 inch mounting hole in the bulkhead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size bulkhead thickness does this drain tube fit?\u003c\/strong\u003e The Sea-Dog 520320-1 has an adjustable length that fits bulkhead installations from 3\/4 inch up to 2-1\/2 inches thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole do I need to drill for installation?\u003c\/strong\u003e This drain tube is designed to fit a standard 1 inch diameter mounting hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 520320-1 drain tube made from?\u003c\/strong\u003e It is made from durable, impact-resistant injection molded HDPE (high-density polyethylene).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this drain tube come in a color other than white?\u003c\/strong\u003e The 520320-1 is finished in white; Sea-Dog also makes the same drain tube design in black ABS as a separate part number for buyers who prefer that color and material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need flaring tools to install this drain tube?\u003c\/strong\u003e No flaring tools are needed. The adjustable-length design of the Sea-Dog drain tube lets you fit it to your bulkhead thickness without cutting or flaring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the drain tube leak-proof once installed?\u003c\/strong\u003e Yes. A locking drain tube nut threads down onto the tube to create a tight, leak-proof seal against the bulkhead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of drain plug works with this tube?\u003c\/strong\u003e The Sea-Dog 520320-1 is designed for use with snap handle and T-handle drain plugs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the overall length and diameter of this drain tube?\u003c\/strong\u003e The 520320-1 has an overall length of 2.5 inches and an outside diameter of 1.25 inches, with a nominal wall thickness of 0.110 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 520320-1 drain tube weigh?\u003c\/strong\u003e It weighs 0.044 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this drain tube flanged on both ends?\u003c\/strong\u003e No, the Sea-Dog 520320-1 is flanged 90 degrees on only one end, which sits against the bulkhead once installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this drain tube be used in a baitwell as well as a motor well?\u003c\/strong\u003e Yes, the 520320-1 is designed for use in motor wells, livewells, and baitwells alike.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988826370267,"sku":"S-D-520320-1","price":3.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5273.jpg?v=1784429779"},{"product_id":"attwood-3899-3-thread-to-qwik-lok-aerator-pump-connector-fitting-fits-a-series-and-tsunami-500-800-gph-pumps-flow-rite-qwik-lok","title":"Attwood 3899-3 Thread-to-Qwik-Lok Connector Fitting for 500-800 GPH Pumps","description":"\u003cp\u003eThe Attwood 3899-3 is a thread-to-Flow-Rite Qwik-Lok connector fitting built for use with 500-800 GPH pumps, such as livewell, baitwell, and washdown pumps found on boats. One end of the fitting is threaded with a 3\/4 inch-14 thread to install directly into a pump outlet, thru-hull, or fitting port, while the opposite end is designed to accept a Flow-Rite Qwik-Lok coupler, allowing hose sections to be connected and disconnected quickly without tools. This makes the 3899-3 a practical choice for boat owners who want a fast-release connection point in their plumbing run instead of a fixed barbed hose joint.\u003c\/p\u003e\u003cp\u003eThe fitting is finished in white and constructed with a machined stainless steel body, giving it corrosion resistance for continuous exposure to saltwater and bilge environments. Its compact size allows it to fit into tight plumbing runs typical of livewell and baitwell systems. Because it uses the Flow-Rite Qwik-Lok coupling standard, it pairs with other Qwik-Lok equipped hose ends and fittings in the same plumbing system, simplifying maintenance and hose changes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 3899-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Thread-to-Flow-Rite Qwik-Lok Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Pump Flow Rate:\u003c\/strong\u003e 500-800 GPH pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/4 inch-14\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4.5 x 9.25 x 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.085 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Attwood 3899-3 connect?\u003c\/strong\u003e It joins a threaded pump or fitting port on one end to a Flow-Rite Qwik-Lok coupler on the other, letting a hose line be connected or released without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat pumps is the 3899-3 fitting designed for?\u003c\/strong\u003e This connector is intended for use with 500-800 GPH pumps, such as those used in livewell, baitwell, and washdown plumbing systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the thread size on the Attwood 3899-3?\u003c\/strong\u003e The threaded end of the 3899-3 uses a 3\/4 inch-14 thread that installs into a matching pump or fitting port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 3899-3 made of plastic or metal?\u003c\/strong\u003e The Attwood 3899-3 has a machined stainless steel body, giving it corrosion resistance for marine plumbing use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this fitting?\u003c\/strong\u003e The Attwood 3899-3 is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 3899-3 weigh?\u003c\/strong\u003e The 3899-3 connector fitting weighs 0.085 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 3899-3 fitting?\u003c\/strong\u003e As packaged, the Attwood 3899-3 measures 4.5 x 9.25 x 3.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a separate Qwik-Lok coupler to use this fitting?\u003c\/strong\u003e Yes, the 3899-3 provides the threaded connection point and Qwik-Lok end; a mating Flow-Rite Qwik-Lok coupler on the hose side is needed to complete the quick-release connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a barb-style version instead of the Qwik-Lok connector?\u003c\/strong\u003e Yes, the Attwood 3899-1 is the barb-connection version in the same fitting family, for those who prefer a hose barb over the Qwik-Lok quick-connect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fitting be used with any pump, or only specific flow rates?\u003c\/strong\u003e The 3899-3 is designed for use with 500-800 GPH pumps rather than higher-flow models.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989670899931,"sku":"ATT-3899-3","price":9.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-3899-3_lg_1__55310.1558113248.500.750.jpg?v=1785188837"},{"product_id":"t-h-marine-ell-118-90-degree-barbed-elbow-fitting-for-1-1-8-inch-id-marine-hose","title":"T-H Marine ELL-118 90 Degree Barbed Elbow Hose Fitting, 1-1\/8 Inch ID Hose","description":"\u003cp\u003eThe T-H Marine ELL-118 is a 90 degree barbed elbow fitting molded specifically to fit marine hose dimensions. It lets you make a clean 90 degree turn in hose routing without kinking the hose, so runs stay open and flow is not restricted at tight bends. The fitting can also be used as a hose junction when repairing a damaged section of hose, joining two lengths back into a continuous run.\u003c\/p\u003e\u003cp\u003eBoth legs of the ELL-118 share the same barb dimension, sized to fit 1-1\/8 inch ID hose. The barbed profile grips the inside of the hose to help the connection resist slipping and pulling loose under vibration and water pressure, and is intended to be secured with a hose clamp on each leg for a complete installation.\u003c\/p\u003e\u003cp\u003eThis fitting is part of a broader T-H Marine barbed elbow lineup covering multiple hose sizes, so it is built to the same design and fit standard used across that family. It is a straightforward, functional fitting for boat builders, hose repair, and general plumbing runs anywhere a 90 degree hose turn is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ELL-118\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 90 Degree Barbed Elbow Hose Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Fitting Size:\u003c\/strong\u003e 1-1\/8 inch ID hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Configuration:\u003c\/strong\u003e Same barb dimension on both legs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.11 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572064322\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the T-H Marine ELL-118 fit?\u003c\/strong\u003e The ELL-118 is sized for 1-1\/8 inch ID hose on both legs of the elbow, since both legs share the same barb dimension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle is this elbow fitting?\u003c\/strong\u003e It is a 90 degree elbow, allowing a hose run to turn a full right angle without the hose itself kinking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the ELL-118 be used to repair a damaged hose?\u003c\/strong\u003e Yes, the ELL-118 can be used as a hose junction to splice two hose sections together when repairing a damaged run, in addition to its normal use for routing turns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use a barbed elbow instead of just bending the hose?\u003c\/strong\u003e Bending 1-1\/8 inch ID hose sharply can kink it and restrict flow; the ELL-118's molded 90 degree barb lets the hose route around a corner while staying fully open.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the ELL-118 weigh?\u003c\/strong\u003e The T-H Marine ELL-118 weighs 0.11 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ELL-118 need hose clamps to install?\u003c\/strong\u003e The barbed legs are designed to grip the inside of 1-1\/8 inch hose, and each leg should be secured with a hose clamp for a complete, leak-resistant connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre both legs of the ELL-118 the same size?\u003c\/strong\u003e Yes, the ELL-118 has the same barb dimension on each leg, both sized for 1-1\/8 inch ID hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the ELL-118 part of a larger size range?\u003c\/strong\u003e T-H Marine makes this same barbed elbow design in multiple hose sizes, with the ELL-118 covering 1-1\/8 inch ID hose specifically.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the T-H Marine ELL-118?\u003c\/strong\u003e The UPC for the ELL-118 90 degree barbed elbow fitting is 733572064322.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the ELL-118 made for marine hose dimensions specifically?\u003c\/strong\u003e Yes, the ELL-118 is molded specifically to fit marine hose dimensions rather than generic industrial hose sizing.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991262441691,"sku":"T-H-ELL-118DP","price":8.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3-4-ell-3-4-dp-barbed-elbow-fittings-28282898022443.jpg?v=1784498500"},{"product_id":"t-h-marine-ell-3-4-90-degree-barbed-elbow-fitting-for-3-4-inch-id-marine-hose","title":"T-H Marine ELL-3\/4 Barbed Elbow Fitting, 90 Degree, 3\/4 Inch Hose ID","description":"\u003cp\u003eThe T-H Marine ELL-3\/4 is a 90 degree barbed elbow fitting molded specifically to fit marine hose dimensions for a 3\/4 inch ID hose. Instead of bending hose sharply around a tight turn and risking a kink that restricts flow, this elbow lets the hose route through a clean 90 degree change in direction while keeping the barb securely seated. It is also commonly used as a hose junction fitting when repairing a damaged section of hose, letting you cut out the bad section and rejoin the two ends. Both legs of the fitting share the same barb dimension, so hose slides on and grips evenly on either side of the turn. This makes it a straightforward, reliable component for livewell plumbing, bilge and washdown hose runs, aerator lines, or any onboard plumbing where a 3\/4 inch ID hose needs to change direction or be spliced without adding a rigid, kink-prone bend. Installation is simple: work the 3\/4 inch hose ends over each barbed leg and secure with standard hose clamps.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ELL-3\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Barbed Elbow Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Angle:\u003c\/strong\u003e 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Inside Diameter:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Configuration:\u003c\/strong\u003e Equal barb dimension on both legs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Hose routing turn or hose junction\/repair splice\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits any marine plumbing system using 3\/4 inch ID hose.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the T-H Marine ELL-3\/4 fit?\u003c\/strong\u003e The ELL-3\/4 is sized for 3\/4 inch ID (inside diameter) hose and is molded specifically to marine hose dimensions for a secure fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this elbow be used to repair a damaged hose?\u003c\/strong\u003e Yes, the ELL-3\/4 barbed elbow can be used as a hose junction fitting to splice two ends of 3\/4 inch ID hose together when repairing a damaged section.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use a 90 degree elbow instead of just bending the hose?\u003c\/strong\u003e Bending 3\/4 inch ID hose sharply around a tight turn can kink it and restrict water flow; the ELL-3\/4 elbow provides a molded 90 degree turn so the hose routes cleanly without kinking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the barb size the same on both ends of the ELL-3\/4?\u003c\/strong\u003e Yes, both legs of the T-H Marine ELL-3\/4 elbow have the same barb dimension, so hose grips evenly regardless of which leg it is fitted to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the ELL-3\/4 made for, livewells or bilge lines?\u003c\/strong\u003e The ELL-3\/4 barbed elbow works for any 3\/4 inch ID hose run onboard, including livewell plumbing, aerator lines, bilge, and washdown hose systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the ELL-3\/4 weigh?\u003c\/strong\u003e The T-H Marine ELL-3\/4 barbed elbow fitting weighs 1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need clamps to install this fitting?\u003c\/strong\u003e Standard hose clamps are used to secure the 3\/4 inch ID hose ends onto each barbed leg of the ELL-3\/4 elbow after the hose is worked onto the barb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes T-H Marine make this elbow in other hose sizes?\u003c\/strong\u003e T-H Marine's barbed elbow fitting line also includes sizes for 1\/4 inch, 3\/8 inch, 1-1\/8 inch, and 1-1\/2 inch ID hose; the ELL-3\/4 is the 3\/4 inch ID version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the ELL-3\/4 elbow made from?\u003c\/strong\u003e The ELL-3\/4 is a molded fitting built to marine hose dimensions; specific material composition is not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the ELL-3\/4 fit both push-on and threaded hose systems?\u003c\/strong\u003e The ELL-3\/4 is a barbed fitting, designed for push-on 3\/4 inch ID hose secured with a hose clamp, not a threaded connection.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991262572763,"sku":"T-H-ELL-3-4DP","price":8.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3-4-ell-3-4-dp-barbed-elbow-fittings-28282898022443_4ea790ed-555e-4cd3-9ce4-20b55b195886.jpg?v=1784498505"},{"product_id":"t-h-marine-odt-1-overflow-drain-tube-1-1-8-straight-12-livewell-baitwell-push-in-standpipe","title":"T-H Marine ODT-1 Overflow Drain Tube - Straight, 12 Inch, Fits 1-1\/8 Inch Thru-Hulls","description":"\u003cp\u003eThe T-H Marine ODT-1 is a straight, push-in overflow drain tube designed to plumb a livewell or baitwell using a single thru-hull fitting for both overflow control and draining. Instead of reaching into the water to pull a drain plug, the operator simply lifts the tube out from the top to begin draining, then re-inserts it to restore the overflow seal. The tube features a tough, flexible vinyl plastic end that inserts directly into the opening of a 1-1\/8 inch T-H Marine thru-hull fitting, connected to a standpipe made of white PVC tubing. This push-in style seals more tightly than many other overflow designs on the market while remaining easy to remove for draining.\u003c\/p\u003e\u003cp\u003eThe ODT-1 is built from marine grade PVC construction for long service life in a wet boat environment. It measures 12 inches in length and is intended to drain straight through a floor-mounted thru-hull (the companion ODT-190 is the 90 degree version for draining through a side wall). It fits all T-H Marine 1-1\/8 inch thru-hull fittings. A matching filter screen (ODTS-1) is sold separately for those who want to add filtration at the drain opening.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ODT-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Straight overflow drain tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThru-Hull Fitting Size:\u003c\/strong\u003e 1-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube\/Boot Outside Diameter:\u003c\/strong\u003e 15\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine grade PVC (vinyl insertion end with PVC standpipe tubing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Livewell \/ baitwell overflow and drain plumbing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits all T-H Marine 1-1\/8 inch thru-hull fittings\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-H Marine ODT-1 used for?\u003c\/strong\u003e The ODT-1 is an overflow drain tube that plumbs a livewell or baitwell so a single thru-hull fitting can serve as both the overflow control and the drain, eliminating the need to reach into the water to pull a plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size thru-hull fitting does the ODT-1 fit?\u003c\/strong\u003e It fits all T-H Marine 1-1\/8 inch thru-hull fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the ODT-1 a straight tube or a 90 degree tube?\u003c\/strong\u003e The ODT-1 is the straight version, designed for draining through a floor. T-H Marine also offers the ODT-190, a 90 degree version of the same 1-1\/8 inch tube designed for draining through a side wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the ODT-1 drain tube?\u003c\/strong\u003e The ODT-1 is 12 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the ODT-1 made of?\u003c\/strong\u003e It is built from marine grade PVC construction, with a flexible vinyl plastic insertion end and a white PVC standpipe tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the ODT-1 tube?\u003c\/strong\u003e The ODT-1 standpipe tubing is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ODT-1 come with a filter screen?\u003c\/strong\u003e No, the ODT-1 is the tube itself; a matching filter screen for this tube is sold separately as the ODTS-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you install and use the ODT-1?\u003c\/strong\u003e The ODT-1's flexible vinyl end simply inserts into the opening of a 1-1\/8 inch thru-hull fitting. To drain the livewell or baitwell, pull the tube out from the top; to restore the overflow seal, push it back in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the ODT-1 be cut to a custom length?\u003c\/strong\u003e T-H Marine offers custom lengths of its overflow drain tubes for boat builders by specifying the desired length appended to the part number, though this custom-length option is not available for online orders of the ODT-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outside diameter of the ODT-1 tube and boot?\u003c\/strong\u003e The 1-1\/8 inch overflow drain tube boot and tube used on the ODT-1 has an outside diameter of 15\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the ODT-1 weigh?\u003c\/strong\u003e The ODT-1 overflow drain tube weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the ODT-1 and the ODT-2?\u003c\/strong\u003e The ODT-1 fits 1-1\/8 inch thru-hull fittings and is 12 inches long, while the ODT-2 fits larger 1-1\/2 inch thru-hull fittings, is 18 inches long, and comes with a screen.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991269519579,"sku":"T-H-ODT1DP","price":11.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/UC-1_01.jpg?v=1784498926"},{"product_id":"t-h-marine-odt-190-livewell-overflow-drain-tube-90-degree-12-in-fits-1-1-8-in-thru-hulls","title":"T-H Marine ODT-190 Overflow Drain Tube, 90 Degree, Fits 1-1\/8 Inch Thru-Hull Fittings, 12 Inch Push-In Vinyl\/PVC Tube, White","description":"\u003cp\u003eThe T-H Marine ODT-190 is a 90 degree overflow drain tube built for livewells and baitwells, fitting all T-H Marine 1-1\/8 inch thru-hull fittings. It uses a push-in design: a tough, flexible vinyl end inserts directly into the opening of the thru-hull fitting, and a standpipe made of white PVC tubing extends up to overflow height. This lets one hole and one fitting handle both the overflow and the drain function, so there is no separate drain plug to reach for. To drain the livewell or baitwell, simply pull the tube out from the top instead of reaching into the water; to reseal, push it back in. The 90 degree bend is designed for draining through a side wall (as opposed to the straight version, which drains through the floor). The tube and boot have an outside diameter of 15\/16 inch for this 1-1\/8 inch fitting size, and the tube measures 12 inches in length. Construction is all marine-grade PVC and vinyl for long service life aboard a boat. This is a push-in style tube rather than a friction-fit drain plug, giving a tighter seal and easier removal than typical livewell overflow setups. A separate filter screen (ODTS-1) is available for the 1-1\/8 inch tube size if a screened drain is wanted.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ODT-190\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Overflow drain tube, push-in, 90 degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Size:\u003c\/strong\u003e 1-1\/8 inch thru-hull fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter (boot and tube):\u003c\/strong\u003e 15\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Vinyl end with white PVC standpipe, marine grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.32 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits all T-H Marine 1-1\/8 inch thru-hull fittings\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size thru-hull fitting does the ODT-190 fit?\u003c\/strong\u003e The ODT-190 fits all T-H Marine 1-1\/8 inch thru-hull fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the ODT-190 a straight or 90 degree drain tube?\u003c\/strong\u003e It is a 90 degree drain tube, designed for draining through a side wall rather than through the floor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the ODT-190 overflow drain tube?\u003c\/strong\u003e The tube measures 12 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outside diameter of the ODT-190 tube and boot?\u003c\/strong\u003e For this 1-1\/8 inch fitting size, the outside diameter of the boot and tube is 15\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the ODT-190 made from?\u003c\/strong\u003e It has a flexible vinyl end paired with a standpipe of white PVC tubing, both marine grade for long-term durability on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ODT-190 include a filter screen?\u003c\/strong\u003e No, the ODT-190 does not include a screen; a separate filter screen, part number ODTS-1, is made to fit the ODT-1 and ODT-190 tubes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you install and use the ODT-190?\u003c\/strong\u003e Insert the vinyl end of the ODT-190 into the opening of the 1-1\/8 inch thru-hull fitting to seal it; to drain the livewell or baitwell, simply pull the tube out from the top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the ODT-190 weigh?\u003c\/strong\u003e The ODT-190 overflow drain tube weighs 0.32 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the ODT-190 be cut to a custom length?\u003c\/strong\u003e Custom lengths of this tube can be made for boat builders by specifying the desired length, but custom-length orders are not available through standard online ordering of the ODT-190.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the ODT-190 and the ODT-290?\u003c\/strong\u003e The ODT-190 is the 1-1\/8 inch, 12 inch, 90 degree tube, while the ODT-290 is a separate part sized for 1-1\/2 inch thru-hulls at 18 inches and includes a screen.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes draining a livewell with the ODT-190 require more than one hole?\u003c\/strong\u003e No, the ODT-190 lets a single hole and fitting serve as both the overflow and the drain, so only one hole is needed in the livewell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the ODT-190 drain tube?\u003c\/strong\u003e The ODT-190 is white.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991269617883,"sku":"T-H-ODT-190-DP","price":14.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/fits-all-t-h-marine-1-1-8-thru-hulls-90-12-l-odt-190-dp-overflow-drain-tubes-push-in-28287065194539.jpg?v=1784498931"},{"product_id":"t-h-marine-odt-290-livewell-overflow-drain-tube-1-1-2-90-degree-18-with-screen-fits-t-h-marine-1-1-2-thru-hulls","title":"T-H Marine ODT-290 Overflow Drain Tube, 90 Degree, Fits 1-1\/2 Inch Thru-Hulls, 18 Inch with Screen","description":"\u003cp\u003eThe T-H Marine ODT-290 is a push-in overflow drain tube built to plumb a livewell or baitwell through a single thru-hull fitting, serving as both the overflow and the drain. Instead of reaching into the water to pull a drain plug, the boat owner simply pulls the tube out from the top of the fitting to begin draining, then pushes it back in to reseal. The tube features a tough, flexible vinyl end that inserts directly into the opening of a 1-1\/2 inch T-H Marine thru-hull fitting, sealing more securely than a conventional drain plug while remaining easy to remove.\u003c\/p\u003e\u003cp\u003eThis is the 90 degree version, engineered for draining through a side wall (the straight-tube version is intended for draining through the floor). It measures 18 inches in length and ships with the screen installed to keep debris out of the drain line. The tube and boot have an outside diameter of 1 5\/8 inches, matching the 1-1\/2 inch thru-hull it is designed to fit. Construction is all marine grade PVC for long service life in wet bilge and livewell environments.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ODT-290\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Push-In, 90 Degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Thru-Hull Diameter:\u003c\/strong\u003e 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Length:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter (Boot and Tube):\u003c\/strong\u003e 1 5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine grade PVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Screen:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.43 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits all T-H Marine 1-1\/2 inch thru-hull fittings\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size thru-hull does the ODT-290 fit?\u003c\/strong\u003e The ODT-290 is sized for T-H Marine 1-1\/2 inch thru-hull fittings; the tube and boot have an outside diameter of 1 5\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the straight or 90 degree overflow tube?\u003c\/strong\u003e The ODT-290 is the 90 degree version, designed for draining through a side wall rather than through the floor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the ODT-290 drain tube?\u003c\/strong\u003e It measures 18 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ODT-290 come with a screen?\u003c\/strong\u003e Yes, the ODT-290 ships with a screen installed to keep debris out of the livewell drain line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the ODT-290 made of?\u003c\/strong\u003e It is constructed of marine grade PVC, with a flexible vinyl end at the thru-hull connection for long-lasting, reliable service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you drain a livewell using this tube?\u003c\/strong\u003e Simply pull the ODT-290 up and out of the thru-hull opening from the top to begin draining, then push the vinyl end back into the fitting to reseal it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ODT-290 replace a standard livewell drain plug?\u003c\/strong\u003e Yes, it is designed to serve as both the overflow and the drain through a single thru-hull, eliminating the need to reach into the water to pull a plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the ODT-290 be cut to a custom length?\u003c\/strong\u003e Custom lengths are available for boat manufacturers by specifying the desired length, but custom-length ordering is not available for online orders of the ODT-290.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the ODT-290 and the ODT-2?\u003c\/strong\u003e Both fit 1-1\/2 inch thru-hulls and are 18 inches long with a screen, but the ODT-2 is a straight tube for draining through the floor while the ODT-290 has a 90 degree bend for draining through a side wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a replacement screen available for the ODT-290?\u003c\/strong\u003e Yes, a separate filter screen part is offered specifically for the ODT-2 and ODT-290 tubes.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991269748955,"sku":"T-H-ODT-290-DP","price":35.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/fits-all-t-h-marine-1-1-8-thru-hulls-90-12-l-odt-190-dp-overflow-drain-tubes-push-in-28287065194539_bcc8fbcf-b361-4a8b-8c25-ccb5bad80ba2.jpg?v=1784498946"},{"product_id":"t-h-marine-tee-112-3-way-barbed-tee-fitting-1-1-2-hose-id-marine-hose-connector","title":"T-H Marine TEE-112 3-Way Hose Tee Fitting, 1-1\/2 Inch Hose I.D.","description":"\u003cp\u003eThe T-H Marine TEE-112 is a 3-way barbed tee fitting molded specifically to fit marine hose dimensions, allowing you to branch or combine 1-1\/2 inch inner diameter hose runs in a single fitting. As a standard tee, all three legs share the same barb dimension, making it a straightforward way to split or join equal-size hose lines in bilge, livewell, washdown, and other onboard plumbing systems without changing hose diameter partway through the run.\u003c\/p\u003e\u003cp\u003eThe barbed connections are designed to grip hose securely when paired with standard hose clamps, giving a reliable seal on marine plumbing runs. The TEE-112 is sold in a bulk pack of 50 per box; a distributor-packaged version of this same fitting is also available as TEE-112 in a 12-per-box pack, so you can choose the pack size that matches whether you are outfitting a single boat or stocking a service department.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e TEE-112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e TEE, 3 way, 1-1\/2 inch Hose I.D.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Standard tee (equal barb dimension on all three legs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Inner Diameter:\u003c\/strong\u003e 1-1\/2 inch (all three legs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Ports:\u003c\/strong\u003e 3-way (tee)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.18 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572067552\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Bulk pack, 50 per box (distributor-packaged version available as TEE-112, 12 per box)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Thru Hull Fittings and Strainers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits any marine plumbing run using 1-1\/2 inch inner diameter hose on all three legs; not limited to a specific boat make or engine.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the T-H Marine TEE-112 fit?\u003c\/strong\u003e The TEE-112 is sized for 1-1\/2 inch inner diameter hose on all three of its legs, since it is a standard tee where every leg shares the same barb dimension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the TEE-112 a reducing tee or a standard tee?\u003c\/strong\u003e It is a standard tee, meaning all three legs of the TEE-112 have the same barb dimension rather than stepping down to a smaller hose size on one leg.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many ports does this fitting have?\u003c\/strong\u003e The TEE-112 is a 3-way tee fitting, with three barbed connection points arranged in a T shape for branching or combining hose runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the TEE-112 weigh?\u003c\/strong\u003e The T-H Marine TEE-112 weighs 0.18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the TEE-112 packaged?\u003c\/strong\u003e The TEE-112 ships in a bulk pack of 50 per box; a distributor-packaged version of the same fitting is offered separately as TEE-112 in a 12-per-box pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the TEE-112 fit a specific boat make or engine?\u003c\/strong\u003e No, the TEE-112 is a universal hose fitting sized to 1-1\/2 inch hose I.D. Rather than being matched to a particular boat make, engine, or model year.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the T-H Marine TEE-112?\u003c\/strong\u003e The UPC for the T-H Marine TEE-112 3-way tee fitting is 733572067552.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the TEE-112 be used to combine two hoses into one drain line?\u003c\/strong\u003e Yes, a 3-way tee like the TEE-112 can be used to combine two 1-1\/2 inch hose runs into one, or to split one run into two, since all three legs are the same size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between TEE-112 and TEE-112?\u003c\/strong\u003e TEE-112 and TEE-112 are the same 3-way, 1-1\/2 inch tee fitting; TEE-112 is the bulk-packed version (50 per box) while TEE-112 is the distributor-packaged version (12 per box).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need hose clamps to install the TEE-112?\u003c\/strong\u003e Yes, the TEE-112 uses barbed connections that are designed to be secured with standard hose clamps on each of its three legs.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991270174939,"sku":"T-H-TEE-112DP","price":10.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/1-1-2-hose-i-d-standard-tee-fittings-28276123500587.jpg?v=1784498980"},{"product_id":"t-h-marine-tee-118-3-way-barbed-tee-fitting-1-1-8-hose-id-marine-hose-tee","title":"T-H Marine TEE-118 Standard 3-Way Tee Fitting, 1-1\/8 Inch Hose Barb","description":"\u003cp\u003eThe T-H Marine TEE-118 is a standard 3-way tee fitting molded specifically to fit marine hose dimensions, built for joining three runs of 1-1\/8 inch I.D. Hose at a single connection point. As a standard tee, all three barbed legs share the same barb dimension, so hose diameter stays consistent through the entire fitting rather than stepping down on one leg the way a reducing tee does. This makes it a straightforward choice anywhere a boat's plumbing needs to branch or combine hose lines without changing hose size, such as bilge, livewell, washdown, or thru-hull drain runs. The fitting is molded as a single piece with barbed connections designed to grip marine hose securely under clamp pressure. It is available from T-H Marine in two pack configurations: an OEM bulk pack of 50 per box (TEE-118) and a distributor packaged version of 12 per box (TEE-118) -- the same fitting, packaged differently under a separate SKU. Whether you are repairing a cracked tee, adding a branch to an existing hose run, or building out new plumbing on a boat, the TEE-118 gives you a purpose-built, marine-rated way to split or combine 1-1\/8 inch hose without adapters or bushings.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e TEE-118\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e TEE, 3 Way, 1-1\/8 Inch Hose I.D.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Standard Tee (equal barb dimension on all three legs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose I.D. Size:\u003c\/strong\u003e 1-1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e 3-Way Tee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572067507\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Thru Hull Fittings and Strainers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack (Bulk):\u003c\/strong\u003e 50 per box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistributor Packaged Version:\u003c\/strong\u003e TEE-118, 12 per box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the T-H Marine TEE-118 fit?\u003c\/strong\u003e The TEE-118 is sized for 1-1\/8 inch I.D. Marine hose on all three barbed legs, since it is a standard (not reducing) tee fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the TEE-118 a standard tee or a reducing tee?\u003c\/strong\u003e It is a standard tee, meaning all three legs have the same barb dimension; T-H Marine's reducing tees are separate parts (TEE-150, TEE-250, TEE-350) that step down to a smaller third leg.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the TEE-118 used for?\u003c\/strong\u003e This 3-way tee fitting connects three sections of 1-1\/8 inch I.D. Marine hose at one point, and is categorized under thru-hull fittings and strainers for use in drain and hose plumbing runs on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between TEE-118 and TEE-118?\u003c\/strong\u003e TEE-118 and TEE-118 are the same 1-1\/8 inch 3-way tee fitting in different packaging -- TEE-118 ships as an OEM bulk pack of 50 per box, while TEE-118 is the distributor packaged version at 12 per box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the TEE-118 weigh?\u003c\/strong\u003e The TEE-118 weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other hose sizes does T-H Marine's standard tee line cover?\u003c\/strong\u003e Besides the 1-1\/8 inch TEE-118, T-H Marine's standard tee fittings are available for 1\/8 inch, 3\/8 inch, 5\/8 inch, 3\/4 inch, and 1-1\/2 inch hose I.D.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the TEE-118 reduce down to a smaller third leg?\u003c\/strong\u003e No -- the TEE-118 keeps the same 1-1\/8 inch barb dimension on all three legs. A tee that reduces to a smaller third leg would be one of T-H Marine's reducing tees (TEE-150, TEE-250, or TEE-350).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the T-H Marine TEE-118?\u003c\/strong\u003e The UPC for the T-H Marine TEE-118 3-way tee fitting is 733572067507.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many TEE-118 fittings come in a box?\u003c\/strong\u003e The bulk-packed TEE-118 ships 50 per box; the distributor packaged version, TEE-118, ships 12 per box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does the TEE-118 fall under?\u003c\/strong\u003e The TEE-118 3-way hose tee is listed under thru-hull fittings and strainers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre all three legs of the TEE-118 the same diameter?\u003c\/strong\u003e Yes, as a standard tee the TEE-118 has the same 1-1\/8 inch barb dimension on each of its three legs, unlike a reducing tee design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the TEE-118 molded specifically for marine hose?\u003c\/strong\u003e Yes, T-H Marine molds the TEE-118 tee fitting specifically to fit marine hose dimensions rather than generic industrial hose sizing.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991270240475,"sku":"T-H-TEE-118DP","price":9.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/1-1-2-hose-i-d-standard-tee-fittings-28276123500587_02f96f75-4a92-4fde-b54e-1febcce222eb.jpg?v=1784498983"},{"product_id":"t-h-marine-tee-3-4-barbed-tee-fitting-3-way-3-4-hose-id-marine-hose-barb-connector","title":"T-H Marine TEE-3\/4 Barbed Tee Fitting, 3 Way, 3\/4 Inch Hose ID","description":"\u003cp\u003eThe T-H Marine TEE-3\/4 is a barbed tee fitting molded specifically to fit marine hose dimensions, giving you a reliable three-way branch connection for onboard plumbing, bilge, livewell, washdown, and drain hose runs. Like all T-H Marine standard tees, the TEE-3\/4 has the same barb dimension on each of its three legs, so all three connections accept 3\/4 inch inside-diameter hose without needing a reducing adapter. This straight (90 degree) tee configuration is the standard choice when you need to split or combine flow between two equal-size hose runs at a right angle, as opposed to a wye fitting, which angles the branch line to reduce turbulence.\u003c\/p\u003e\u003cp\u003eBecause the barb dimensions are matched across all three ports, installation is straightforward: push each hose end over its barb and secure with a hose clamp on every leg. The fitting is part of T-H Marine's standard tee lineup, which spans hose IDs from 1\/8 inch up to 1-1\/2 inch, so boat builders and repair techs can standardize on the same barbed-tee design across multiple hose sizes on a single vessel.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e TEE-3\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Barbed Tee Fitting (3 Way)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Ports:\u003c\/strong\u003e 3 (tee configuration)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Barb Size (all legs):\u003c\/strong\u003e 3\/4 inch Hose I.D.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Style:\u003c\/strong\u003e Standard Tee (equal barb dimension on each leg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572067453\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack (OEM\/Bulk):\u003c\/strong\u003e 50 per box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack (Distributor Packaged):\u003c\/strong\u003e 12 per box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the T-H Marine TEE-3\/4 fit?\u003c\/strong\u003e All three legs of the TEE-3\/4 are barbed for 3\/4 inch inside-diameter hose, since T-H Marine's standard tees use the same barb dimension on every leg.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the TEE-3\/4 a straight tee or an angled wye fitting?\u003c\/strong\u003e It is a standard tee, meaning the branch line meets the main run at a 90 degree angle, unlike a wye fitting where the branch enters at 45 degrees to reduce turbulence.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use different hose sizes on each leg of this fitting?\u003c\/strong\u003e No. The TEE-3\/4 is a standard (non-reducing) tee, so all three legs are barbed for the same 3\/4 inch hose I.D.; if you need mixed sizes, T-H Marine's reducing tee line (such as the TEE-250 or TEE-350) is the correct option instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the TEE-3\/4 tee fitting weigh?\u003c\/strong\u003e The T-H Marine TEE-3\/4 weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install the TEE-3\/4 on my boat's hose lines?\u003c\/strong\u003e Push each of the three 3\/4 inch hose ends fully onto the barbed legs of the TEE-3\/4 and secure each connection with a properly sized hose clamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this fitting typically used for on a boat?\u003c\/strong\u003e The TEE-3\/4 is used to branch or combine 3\/4 inch hose runs in onboard plumbing systems such as livewell, washdown, bilge, or drain lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes T-H Marine make this tee in other hose sizes?\u003c\/strong\u003e Yes, the same standard tee design is available for 1\/8, 3\/8, 5\/8, 3\/4, 1-1\/8, and 1-1\/2 inch hose I.D., with the TEE-3\/4 covering the 3\/4 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is a standard tee different from a reducing tee?\u003c\/strong\u003e A standard tee like the TEE-3\/4 has the same barb size on all three legs, while a reducing tee has two main legs of one size and a third leg of a smaller size for combining smaller hoses into one larger drain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat packaging does the TEE-3\/4 come in?\u003c\/strong\u003e The TEE-3\/4 is packed 50 per box in OEM\/bulk packaging or 12 per box in distributor packaging (TEE-3\/4).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the TEE-3\/4 genuine T-H Marine or an aftermarket part?\u003c\/strong\u003e The TEE-3\/4 is a genuine T-H Marine barbed tee fitting, molded specifically to marine hose dimensions.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991271026907,"sku":"T-H-TEE-3-4DP","price":8.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/1-1-2-hose-i-d-standard-tee-fittings-28276123500587_da9f90bd-6b6d-456c-85a3-71ffff3f1557.jpg?v=1784499017"},{"product_id":"t-h-marine-wdh-15w-b-coiled-washdown-hose-15-white-with-pistol-grip-nozzle","title":"T-H Marine WDH-15W-B Coiled Wash Down Hose, 15 Feet, White, with Pistol Grip Nozzle","description":"\u003cp\u003eThe T-H Marine WDH-15W-B is a 15 foot coiled poly wash down hose built to keep boat decks clean and clear without the tangled mess of a straight hose. The coiled construction resists kinking, so the hose retracts out of the way after use instead of piling up underfoot. It is molded from UV and chemical resistant poly material that will not corrode, making it suited to repeated exposure to sun, saltwater, and cleaning chemicals on deck. The hose comes complete with a pistol grip nozzle, giving you on\/off spray control at the point of use for rinsing gear, lines, anchors, and deck surfaces. At 1\/2 inch in diameter and finished in white, this hose is made in the USA to a high manufacturing standard for hose and fitting quality. Its compact coiled profile makes it easy to store in a locker, rod locker, or deck compartment where space is limited, and the lightweight 1 pound build keeps it easy to handle and stow. This washdown hose is a straightforward upgrade or replacement for boaters who need a reliable, tangle-free hose at the washdown station.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e WDH-15W-B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Wash Down Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 15 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Diameter:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Poly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Type:\u003c\/strong\u003e Pistol Grip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Style:\u003c\/strong\u003e Coiled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572045505\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 13.9 cm (L) x 17.0 cm (W) x 36.7 cm (H)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the T-H Marine WDH-15W-B wash down hose?\u003c\/strong\u003e The WDH-15W-B is a 15 foot coiled poly wash down hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of nozzle comes with the WDH-15W-B?\u003c\/strong\u003e It includes a pistol grip nozzle for on\/off spray control while washing down the deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the WDH-15W-B resist kinking?\u003c\/strong\u003e Yes, its coiled poly design is built to resist kinking compared to a straight hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the WDH-15W-B hose made of?\u003c\/strong\u003e The hose is made of poly, a UV and chemical resistant, non-corrosive material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the WDH-15W-B wash down hose?\u003c\/strong\u003e This wash down hose is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the WDH-15W-B hose manufactured?\u003c\/strong\u003e The T-H Marine WDH-15W-B wash down hose is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the WDH-15W-B and the WDH-15W-C?\u003c\/strong\u003e The WDH-15W-B comes with a pistol grip nozzle, while the WDH-15W-C is the same 15 foot white coiled hose fitted with a straight nozzle instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a longer version of this hose available?\u003c\/strong\u003e A 25 foot white coiled hose with a pistol grip nozzle is offered as a separate part, distinct from the 15 foot WDH-15W-B.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat diameter is the WDH-15W-B hose?\u003c\/strong\u003e The hose has a 1\/2 inch diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the WDH-15W-B?\u003c\/strong\u003e The WDH-15W-B includes the 15 foot coiled poly hose and a pistol grip nozzle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the WDH-15W-B weigh?\u003c\/strong\u003e The WDH-15W-B wash down hose weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the WDH-15W-B resistant to saltwater and chemical exposure?\u003c\/strong\u003e Yes, the hose and its fittings are UV and chemical resistant and non-corrosive, suited to marine washdown use.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991273353435,"sku":"T-H-WDH-15W-B-DP","price":45.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/washdown-hose-28279043686443_a6c8e600-617c-4bd5-8ff9-e8a2825d80ff.jpg?v=1784499101"},{"product_id":"t-h-marine-y-118-barbed-wye-y-fitting-3-way-1-1-8-in-marine-hose-black","title":"T-H Marine Y-118 Barbed Wye Y-Fitting, 3-Way, 1-1\/8 Inch Hose Barb","description":"\u003cp\u003eThe T-H Marine Y-118 is a barbed wye (Y) fitting molded specifically to fit 1-1\/8 inch marine hose. A wye fitting has three openings and is used to create a branch line, similar to a tee fitting except that the side inlet enters at a 45 degree angle rather than 90 degrees. This angled branch reduces friction and turbulence that can otherwise hamper flow through the line, making the Y-118 a practical choice anywhere you need to join or split a 1-1\/8 inch hose run.\u003c\/p\u003e\u003cp\u003eOn board, a Y fitting like this can offer better drainage than a standard tee and may be easier to install in tight spaces due to its angled leg. All three legs of the Y-118 share the same 1-1\/8 inch barb dimension, so it mates cleanly with standard 1-1\/8 inch marine hose on every connection point. It is commonly used in bilge, scupper, and livewell drain lines, and other plumbing runs where two hose paths need to combine into one, or one hose needs to split into two.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e Y-118\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Barbed Wye \/ Y-Fitting, 3-Way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size (all legs):\u003c\/strong\u003e 1-1\/8 inch barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBranch Angle:\u003c\/strong\u003e 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.12 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Bulk, 50 per box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the T-H Marine Y-118 fit?\u003c\/strong\u003e The Y-118 is sized for 1-1\/8 inch ID marine hose, and all three legs of the fitting share that same 1-1\/8 inch barb dimension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hose connections does this fitting have?\u003c\/strong\u003e It is a 3-way wye fitting, meaning it has three barbed openings so two hose runs can be joined into one, or one run split into two.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between a wye fitting and a tee fitting?\u003c\/strong\u003e On the Y-118, the side inlet enters at a 45 degree angle rather than the 90 degree angle used on a standard tee fitting, which reduces friction and turbulence in the flow compared to a tee.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a Y fitting instead of a tee fitting for a drain line?\u003c\/strong\u003e The angled branch on the Y-118 can provide better drainage than a straight tee connection and may be easier to install in tight spaces due to its angled leg.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Y-118 fitting weigh?\u003c\/strong\u003e The T-H Marine Y-118 weighs 0.12 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this fitting typically used for on a boat?\u003c\/strong\u003e The Y-118 wye fitting is used to create branch lines in 1-1\/8 inch hose runs, such as combining or splitting bilge, scupper, or drain hose lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre all three legs of the Y-118 the same size?\u003c\/strong\u003e Yes, the Y-118 has the same 1-1\/8 inch barb dimension on all three legs of the fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Y-118 packaged?\u003c\/strong\u003e The T-H Marine Y-118 ships in bulk packaging, 50 units per box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Y-118 the same as the Y-750 or Y-112 fitting?\u003c\/strong\u003e No, the Y-118 is sized for 1-1\/8 inch hose specifically; the Y-750 fits 3\/4 inch hose and the Y-112 fits 1-1\/2 inch hose, so each is a different part for a different hose size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Y-118 be used to reduce the number of exit fittings in a hull?\u003c\/strong\u003e Yes, using a Y-118 wye fitting to combine two 1-1\/8 inch hose lines into one can reduce the number of separate exit fittings and hull penetrations needed.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991274369243,"sku":"T-H-Y-118DP","price":12.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/1-1-8-hose-y-fittings-wye-fittings-28255238291499.jpg?v=1784499134"},{"product_id":"t-h-marine-y-750-barbed-wye-y-fitting-3-way-3-4-hose-marine-nylon-branch-connector","title":"T-H Marine Y-750 Barbed Wye Y-Fitting, 3-Way, 3\/4 Inch Hose","description":"\u003cp\u003eThe T-H Marine Y-750 is a barbed wye (Y) fitting molded specifically to fit marine hose dimensions, designed to create branch lines in a boat's hose plumbing. Unlike a standard tee fitting, a wye fitting joins three hose legs with the side inlet entering at a 45 degree angle rather than a straight 90 degree angle, which reduces friction and turbulence that could otherwise hamper water flow. This angled design makes the Y-750 useful anywhere a boat owner needs to combine or split hose runs, such as directing drainage from multiple sources into a single line, and it can improve drainage efficiency while also simplifying installation where space is limited.\u003c\/p\u003e\u003cp\u003eAll three legs of the Y-750 share the same barb dimension, sized for 3\/4 inch inside diameter hose, so each connection seals consistently without needing different size clamps on different legs. The fitting is molded from black nylon, giving it resistance to the marine environment while keeping the part lightweight and compact. By combining multiple smaller hose runs into fewer exit points, a wye fitting like the Y-750 can also reduce the total number of holes that need to be cut into a hull for exit fittings, saving both material cost and installation time.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e Y-750\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Barbed Wye \/ Y-Fitting, 3 Way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Ports:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBranch Angle:\u003c\/strong\u003e 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.5 x 4 x 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572044102\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the T-H Marine Y-750 fit?\u003c\/strong\u003e The Y-750 is sized for 3\/4 inch inside diameter hose on all three of its barbed ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hose connections does the Y-750 wye fitting have?\u003c\/strong\u003e It has three barbed ports, since a wye fitting joins three hose legs into one branch connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle does the branch leg enter at on this fitting?\u003c\/strong\u003e The side branch on the Y-750 enters at a 45 degree angle rather than the 90 degree angle used on a tee fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a wye fitting like the Y-750 instead of a tee fitting?\u003c\/strong\u003e The angled branch on the Y-750 reduces the friction and turbulence in the flow that a straight 90 degree tee fitting would create.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Y-750 made from?\u003c\/strong\u003e The Y-750 is molded from black nylon, which resists the marine environment while keeping the fitting lightweight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Y-750 fitting?\u003c\/strong\u003e It is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Y-750?\u003c\/strong\u003e The Y-750 measures 5.5 x 4 x 0.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Y-750 weigh?\u003c\/strong\u003e It weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre all three legs of the Y-750 the same size?\u003c\/strong\u003e Yes, all three legs of the Y-750 share the same 3\/4 inch barb dimension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Y-750 fitting typically used for on a boat?\u003c\/strong\u003e It is used to create branch lines in boat hose plumbing, such as joining multiple drain hoses into one line, which can also reduce the number of holes that need to be cut into the hull for exit fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Y-750 molded specifically for marine hose?\u003c\/strong\u003e Yes, the Y-750 is molded specifically to fit marine hose dimensions rather than generic hose fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the T-H Marine Y-750?\u003c\/strong\u003e The UPC for the Y-750 wye fitting is 733572044102.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991274402011,"sku":"T-H-Y-750DP","price":11.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/1-1-8-hose-y-fittings-wye-fittings-28255238291499_95ff8168-75a0-4fb7-970b-c69750483f5c.jpg?v=1784499136"},{"product_id":"davis-instruments-540-quick-fist-rubber-clamp-holds-7-8-to-2-3-4-inch-diameter-pack-of-2","title":"Davis Instruments 540 Quick Fist Rubber Clamp, Holds 7\/8 to 2-3\/4 Inch Diameter, Pack of 2","description":"\u003cp\u003eThe Davis Instruments Quick Fist (part number 540) is a one-piece rubber clamp designed to keep tools and gear firmly stowed in place, whether you are securing equipment on a boat, an off-road truck, an ATV, or military equipment. Each package includes 2 clamps, making it easy to outfit multiple storage points in one purchase.\u003c\/p\u003e\u003cp\u003eQuick Fist is molded from heavy duty transportation grade rubber that is UV resistant and built to withstand extreme heat and cold, so it holds up to sun exposure and temperature swings without breaking down. Because the clamp will not rust or corrode, it is particularly well suited to marine environments where metal hardware often fails over time.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the clamp mounts with #10 (5 mm) bolts or screws (not included), and once in place it flexes open to accept an item and springs back to grip it securely. Quick Fist holds objects ranging from 7\/8 to 2-3\/4 inches (22 to 57 mm) in diameter, and each clamp supports approximately 22 pounds (10 kg), making it a practical way to stow boat hooks, fenders, tools, fishing rods, flashlights, and similar gear without hardware, straps, or bungee cords.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Davis Instruments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 540\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rubber Mounting Clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Heavy duty transportation grade rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamping Diameter Range:\u003c\/strong\u003e 7\/8 to 2-3\/4 inches (22 to 57 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Approximately 22 pounds (10 kg) per clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e #10 (5 mm) bolts or screws (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2 clamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 011698008216\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size objects does the Davis Quick Fist 540 clamp fit?\u003c\/strong\u003e The Quick Fist (part number 540) holds objects ranging from 7\/8 to 2-3\/4 inches (22 to 57 mm) in diameter, covering most tool handles, boat hooks, and similar gear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many clamps come in a package?\u003c\/strong\u003e Each package of the Davis Instruments 540 Quick Fist includes 2 rubber clamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can each Quick Fist clamp hold?\u003c\/strong\u003e Each Quick Fist clamp supports approximately 22 pounds (10 kg), which is enough for most stowed tools and equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware do I need to mount the Quick Fist clamp?\u003c\/strong\u003e The 540 Quick Fist mounts with #10 (5 mm) bolts or screws, which are not included in the package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Quick Fist clamp suitable for marine use?\u003c\/strong\u003e Yes, the Davis Quick Fist 540 will not rust or corrode, making it well suited to boats and other marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Quick Fist clamp made from?\u003c\/strong\u003e The 540 Quick Fist is made from heavy duty transportation grade rubber that is UV resistant and holds up to extreme heat and cold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Quick Fist clamp be used outside of boats?\u003c\/strong\u003e Yes, in addition to marine use, the Davis 540 Quick Fist works well on off-road trucks, ATVs, military equipment, and other vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Quick Fist clamp package weigh?\u003c\/strong\u003e The Davis Instruments 540 Quick Fist clamp package weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Quick Fist clamp require any tools to open and close around an item?\u003c\/strong\u003e No, the 540 Quick Fist is a one-piece rubber clamp that flexes open to accept an item and springs back to grip it, with no latching or tools needed to use it once mounted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat items are commonly stored with the Quick Fist clamp?\u003c\/strong\u003e Boaters commonly use the Davis 540 Quick Fist to stow tools, boat hooks, fishing rods, and flashlights within its 7\/8 to 2-3\/4 inch diameter range.\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":49026458812635,"sku":"DAV-540","price":12.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/15063_700_2d951f37-1fe1-4a9e-94a9-851742630da6.jpg?v=1785026824"},{"product_id":"camco-22853-premium-drinking-water-hose-50-feet-x-5-8-inch-anti-kink-design-blue","title":"Camco 22853 Premium Drinking Water Hose, 50 Feet x 5\/8 Inch, Anti-Kink Design, Blue","description":"\u003cp\u003eThe Camco 22853 Premium Drinking Water Hose is a 50 foot, 5\/8 inch inside diameter hose built for supplying safe drinking water to RVs, boats, and marine fresh water systems. It is constructed 20 percent thicker than standard drinking water hoses, giving it added resistance to kinking and everyday wear during hookup and storage. The anti-kink design pairs with machined fittings and strain relief ends at both connection points, reducing stress at the coupling where hoses most often fail.\u003c\/p\u003e\u003cp\u003eThis hose is made with NSF certified hose material that is lead free, BPA free, and phthalate free, so it will not leave a plastic taste in drinking water. It is UV stabilized for longer service life when stored or run in sunlight, and it is CSA Low Lead Content Certified to NSF\/ANSI 372, meeting federal and state low lead requirements including California's AB1953 and Vermont's Act 193. The hose has a 1 inch outside diameter and is finished in blue for easy identification as a drinking water line versus a gray water or utility hose.\u003c\/p\u003e\u003cp\u003eAt 50 feet, the Camco 22853 gives enough reach to connect from a campground spigot or marina water source to an RV or boat fresh water inlet without needing extension sections for most standard hookups.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Camco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 22853\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 50 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.444 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Anti-kink with machined fittings and strain relief ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF certified hose material, CSA Low Lead Content Certified to NSF\/ANSI 372, compliant with California AB1953 and Vermont Act 193\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Camco 22853 hose safe for drinking water?\u003c\/strong\u003e Yes, the Camco 22853 is made with NSF certified hose material that is lead free, BPA free, and phthalate free, and it is CSA Low Lead Content Certified to NSF\/ANSI 372.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this hose?\u003c\/strong\u003e The Camco 22853 measures 50 feet in length with a 5\/8 inch inside diameter and a 1 inch outside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hose leave a plastic taste in the water?\u003c\/strong\u003e No, the Camco 22853 is designed to leave no strong plastic taste since it uses drinking water safe, NSF certified hose material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hose resist kinking?\u003c\/strong\u003e Yes, the 22853 uses an anti-kink design and is 20 percent thicker than standard drinking water hoses, which reduces the chance of kinks during use and coiling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Camco 22853 hose?\u003c\/strong\u003e It is blue, which makes it easy to distinguish from gray water or general utility hoses at a glance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose UV resistant for outdoor storage?\u003c\/strong\u003e Yes, the Camco 22853 is UV stabilized, which helps it hold up to sunlight exposure over time compared to non-stabilized hoses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hose meet low lead legal requirements?\u003c\/strong\u003e The 22853 is CSA Low Lead Content Certified to NSF\/ANSI 372 and complies with federal and state low lead laws, including California's AB1953 and Vermont's Act 193.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the fittings made of on this hose?\u003c\/strong\u003e The Camco 22853 has machined fittings with strain relief ends at the connections, which adds durability at the points where hoses typically wear out first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hose be used for both RVs and boats?\u003c\/strong\u003e Yes, the 50 foot Camco 22853 is suited for supplying drinking water to RV and marine fresh water systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Camco 22853 hose weigh?\u003c\/strong\u003e The Camco 22853 weighs 7.444 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the hose made from?\u003c\/strong\u003e The Camco 22853 is made of plastic hose material that is NSF certified for drinking water use.\u003c\/p\u003e","brand":"Camco","offers":[{"title":"Default Title","offer_id":49027482648795,"sku":"CAM-22853","price":43.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/810FlOy-JML_a26af84e-bfb0-4337-aff9-98b07d1114ac.jpg?v=1785331015"},{"product_id":"camco-quick-turn-permanent-water-heater-by-pass-kit-brass-valve-part-35983","title":"Camco Quick-Turn Permanent Water Heater By-Pass Kit, Brass Valve, Part 35983","description":"\u003cp\u003eThe Camco Quick-Turn Permanent Water Heater By-Pass Kit (part number 35983) is a permanent-install bypass kit that lets you route around your water heater during winterizing, so you are not forced to fill the entire tank with antifreeze every season. Once installed, switching between normal use and bypass mode takes a single turn of the valve, making winterizing and de-winterizing fast and repeatable year after year.\u003c\/p\u003e\u003cp\u003eThe kit is built around a sturdy brass backflow preventer and a brass 100% shut-off valve, giving a reliable, non-restrictive seal in both flow directions. It connects with a crimp-resistant nylon reinforced hose that resists kinking and cracking over repeated seasonal use. Because the valve assembly stays in place permanently, there is no need to reconnect fittings each time you winterize; you simply turn the valve to bypass the water heater and pump antifreeze straight through the fresh water lines instead.\u003c\/p\u003e\u003cp\u003eThis by-pass kit is a good fit for anyone who winterizes a water heater on a recurring basis and wants to cut down on both antifreeze usage and the time spent on the job.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Camco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 35983\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014717359832\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e 100% shut-off backflow preventer valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Single-turn (quick-turn) bypass switching\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose:\u003c\/strong\u003e Crimp-resistant nylon reinforced hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Permanent, one-time install\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.962 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Camco Quick-Turn Permanent Water Heater By-Pass Kit (35983) do?\u003c\/strong\u003e It permanently reroutes water around your water heater so you can winterize the rest of the fresh water system without filling the tank with antifreeze, switching between normal use and bypass with a single turn of the valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a one-time installation or does it need to be reconnected each season?\u003c\/strong\u003e Part 35983 installs permanently once; after that, winterizing and de-winterizing is just a matter of turning the valve rather than disconnecting and reconnecting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the valve and hose made of?\u003c\/strong\u003e The kit uses a brass backflow preventer and brass 100% shut-off valve, connected with a crimp-resistant nylon reinforced hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the valve fully block water flow to the water heater?\u003c\/strong\u003e Yes, the brass valve in the 35983 kit is a 100% shut-off design, so no water reaches the water heater once it is switched to bypass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns does it take to switch modes?\u003c\/strong\u003e Just one turn of the valve switches the Camco 35983 kit between normal flow and water heater bypass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this help me save on antifreeze during winterizing?\u003c\/strong\u003e Yes, bypassing the water heater with this kit means you do not need to fill the tank with antifreeze, which reduces the amount of antifreeze needed to winterize the system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the hose prone to kinking or cracking?\u003c\/strong\u003e No, the hose included with the Camco 35983 by-pass kit is nylon reinforced and crimp-resistant, so it holds up to repeated seasonal handling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Camco 35983 kit?\u003c\/strong\u003e The kit includes the brass backflow preventer, the brass 100% shut-off valve, and the crimp-resistant nylon reinforced hose needed for the permanent by-pass installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the product weight?\u003c\/strong\u003e The Camco Quick-Turn Permanent Water Heater By-Pass Kit (35983) weighs 0.962 pounds.\u003c\/p\u003e","brand":"Camco","offers":[{"title":"Default Title","offer_id":49027482583259,"sku":"CAM-35983","price":35.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-4__75228.1763741595.500.750.jpg?v=1785163589"},{"product_id":"camco-permanent-water-heater-by-pass-kit-with-brass-valves-and-8-inch-hose-for-6-gallon-tanks","title":"Camco Permanent Water Heater By-Pass Kit with Brass Valves and 8 Inch Hose for 6 Gallon Tanks","description":"\u003cp\u003eThe Camco Permanent Water Heater By-Pass Kit (35953) gives you a simple, one-time installation for bypassing your water heater during winterizing. Instead of disconnecting hoses or juggling fittings every season, this kit stays permanently plumbed into your system so you can route antifreeze around the water heater with the turn of a valve handle.\u003c\/p\u003e\u003cp\u003eThe kit includes two brass 3-way bypass valves with shutoff, connected by a crimp-resistant, nylon-reinforced hose sized for 6-gallon water heater tanks. Because the valves provide non-restrictive flow, water and antifreeze move through the lines without unnecessary pressure loss. Valve handles include built-in flow indicators, so you can see at a glance whether the system is set to normal fill or bypass mode. The brass fittings use 1\/2 inch - 14 NPT tapered threads for a secure, leak-resistant connection, and Teflon tape is included to help seal the joints on installation.\u003c\/p\u003e\u003cp\u003eOnce installed, winterizing no longer requires disassembling water heater connections: you simply switch the valves to bypass, and your water pump draws antifreeze through the fresh water lines instead of filling and wasting antifreeze in the water heater tank. This is designed for 6-gallon RV and camper water heater tanks.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Camco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 35953\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Material:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Valves:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e 3-way brass bypass valve with shutoff\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Feature:\u003c\/strong\u003e Flow indicator handles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Material:\u003c\/strong\u003e Crimp-resistant nylon reinforced hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Compatibility:\u003c\/strong\u003e 6 gallon water heater tanks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/2 inch - 14 NPT tapered threads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Teflon tape\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 7.99 inches wide x 17.19 inches high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Length:\u003c\/strong\u003e 7.63 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Warranty:\u003c\/strong\u003e Limited 1 Year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014717359535\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for 6-gallon water heater tanks using 1\/2 inch - 14 NPT tapered thread connections.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat tank size is the Camco 35953 By-Pass Kit designed for?\u003c\/strong\u003e This kit is sized for 6-gallon water heater tanks, with an 8 inch hose connecting its two brass valves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many valves come with the Camco Permanent Water Heater By-Pass Kit?\u003c\/strong\u003e Two brass 3-way bypass valves with shutoff are included, part number 35953, each with a flow indicator handle so you can see whether the system is set to fill or bypass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a permanent installation or does it need to be removed after winterizing?\u003c\/strong\u003e It is a permanent installation. Once the Camco 35953 kit is plumbed in, you leave it in place year-round and simply turn the valve handles to switch between normal use and bypass mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size do the valves use?\u003c\/strong\u003e The brass valves on kit 35953 use 1\/2 inch - 14 NPT tapered threads for a secure, leak-resistant connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include anything to help seal the connections?\u003c\/strong\u003e Yes, Teflon tape is included with the Camco 35953 kit to help achieve a tight seal at the threaded connections during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hose made of?\u003c\/strong\u003e The hose supplied with this by-pass kit is a crimp-resistant, nylon-reinforced hose, 8 inches long, designed to withstand repeated winterizing use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know which way the valves are set?\u003c\/strong\u003e The valve handles on the Camco 35953 kit include built-in flow indicators, giving a quick visual cue of whether the valve is set to normal flow or bypass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this kit and the Camco Quick-Turn By-Pass Kit?\u003c\/strong\u003e The Camco 35953 kit uses two separate 3-way brass valves that are each turned individually, while the Quick-Turn Permanent Water Heater By-Pass Kit (a different SKU) uses a single backflow-preventer valve for one-turn shutoff.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The kit includes two brass 3-way bypass valves with shutoff, an 8 inch crimp-resistant nylon-reinforced hose, and Teflon tape.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the by-pass kit weigh?\u003c\/strong\u003e The Camco 35953 Permanent Water Heater By-Pass Kit weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the kit?\u003c\/strong\u003e The kit measures 7.99 inches wide by 17.19 inches high, with an item length of 7.63 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit genuine Camco or aftermarket?\u003c\/strong\u003e This is a genuine Camco product, part number 35953, backed by Camco's limited 1 year warranty.\u003c\/p\u003e","brand":"Camco","offers":[{"title":"Default Title","offer_id":49027482616027,"sku":"CAM-35953","price":35.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/cam-35953_lg__48283.1722353527.500.750.jpg?v=1785163589"},{"product_id":"camco-22833-tastepure-25-foot-drinking-water-hose-5-8-inch-id-lead-free-certified","title":"Camco 22833 TastePURE 25-Foot Drinking Water Hose, 5\/8 Inch ID, Lead-Free Certified","description":"\u003cp\u003eThe Camco 22833 TastePURE Drinking Water Hose is a 25-foot potable water hose built for safe, clean water delivery in RV, camping, boating, and general outdoor use. It is constructed from NSF\/ANSI 61 certified PVC hose material and is CSA lead-free content certified to NSF\/ANSI 372, meeting federal and state lead-free requirements. The hose is lead-free, BPA-free, and phthalate-free, so water passing through it stays safe for drinking and cooking.\u003c\/p\u003e\u003cp\u003eEach hose has a 5\/8 inch inner diameter and a 0.75 inch outside diameter, with machined fittings and strain-relief ends at both connections for a secure, durable coupling that resists stripping and cracking. The blue PVC construction includes diamond-hatch reinforcement for kink resistance and is UV-stabilized to hold up to sun exposure over repeated outdoor use. The hose is notably flexible with minimal memory retention, so it lies flat and handles easily rather than fighting to hold a coiled shape, and a strain-relief comfort grip section aids handling during connection and disconnection.\u003c\/p\u003e\u003cp\u003eThis hose is suited to RV fresh water fill-ups and connections, marine drinking water use, and general garden or camping water supply where a certified lead-free, drinking-safe hose is required. It is manufactured in the USA.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Camco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 22833\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e TastePURE Premium Drinking Water Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyvinyl Chloride (PVC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.561 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF\/ANSI 61 certified hose, CSA lead-free content certified to NSF\/ANSI 372\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead-Free \/ BPA-Free \/ Phthalate-Free:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings:\u003c\/strong\u003e Machined fittings with strain-relief ends, both ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 1 x 25-foot drinking water hose\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the inner diameter of the Camco 22833 water hose?\u003c\/strong\u003e The Camco 22833 TastePURE hose has a 5\/8 inch inner diameter and a 0.75 inch outside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose safe for drinking water?\u003c\/strong\u003e Yes, the Camco 22833 is constructed from NSF\/ANSI 61 certified hose material and is CSA lead-free content certified to NSF\/ANSI 372, making it safe for drinking water use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Camco 22833 hose lead-free?\u003c\/strong\u003e It is lead-free, BPA-free, and phthalate-free, and it fully complies with federal and state lead-free laws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Camco 22833 hose?\u003c\/strong\u003e This hose measures 25 feet in length, sized for RV fresh water fill-ups, boating, camping, and garden use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the hose made from?\u003c\/strong\u003e The 22833 is made from reinforced, UV-stabilized PVC (polyvinyl chloride) with diamond-hatch reinforcement for kink resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hose kink easily?\u003c\/strong\u003e No, the diamond-hatch reinforced PVC construction of the Camco 22833 is designed for maximum kink resistance during use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Camco 22833 hose?\u003c\/strong\u003e The hose is blue, a common color convention for drinking water hoses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connections does the hose have?\u003c\/strong\u003e Both ends of the 22833 feature machined fittings with strain-relief ends for a secure, durable connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Camco 22833 hose weigh?\u003c\/strong\u003e The hose weighs 3.561 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hose be used for boating and marine applications?\u003c\/strong\u003e Yes, the Camco 22833 drinking water hose is suited to boating and marine use in addition to RV and camping applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Camco 22833 hose manufactured?\u003c\/strong\u003e This hose is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 22833?\u003c\/strong\u003e Each order includes one 25-foot Camco TastePURE drinking water hose.\u003c\/p\u003e","brand":"Camco","offers":[{"title":"Default Title","offer_id":49027482681563,"sku":"CAM-22833","price":28.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/710n8ykb1QL_ae6b312d-ebc4-4915-834f-e141bfd09f63.jpg?v=1785331015"},{"product_id":"camco-brass-blow-out-plug-for-1-inch-diameter-water-lines-winterizing-plug-36153","title":"Camco Brass Blow-Out Plug for 1 Inch Diameter Water Lines, Winterizing Plug (36153)","description":"\u003cp\u003eThe Camco Brass Blow-Out Plug (36153) clears water lines completely for winterizing, helping prevent frozen pipes and the costly damage that comes with them. Built from sturdy brass, the plug screws directly into the city water inlet so a standard blow-out pump can force compressed air through the plumbing system, pushing out residual water before antifreeze is added. Removing standing water from the lines first means less antifreeze is needed overall and reduces the risk of ice forming in sections that would otherwise stay wet through the cold months.\u003c\/p\u003e\u003cp\u003eThe plug is sized for use with 1 inch diameter drains and connects using a Schrader valve, the same style found on most tire inflators, so it works with common air compressors without needing a specialty adapter. To use it, screw the blow-out plug into the city water inlet, open all drains and faucets, then attach and activate an air pump until all lines run clear. It is a straightforward, one-piece tool intended for seasonal winterizing and dewinterizing rather than permanent installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Camco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 36153\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.095 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014717361538\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Drain Diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Schrader valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5.50 x 3.63 x 1.24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for use with 1 inch diameter water line drains and city water inlets; connects to air compressors fitted with a standard tire inflator (Schrader valve) attachment.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size drains does the Camco Brass Blow-Out Plug fit?\u003c\/strong\u003e The Camco Brass Blow-Out Plug (36153) is made for use with 1 inch diameter drains.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 36153 blow-out plug attach to my water system?\u003c\/strong\u003e It screws directly into the city water inlet, and then compressed air is pushed through the lines to clear out water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air compressor works with this plug?\u003c\/strong\u003e The plug uses a Schrader valve, the same connector found on standard tire inflators, so it works with most air compressors that have a tire inflator attachment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Camco Brass Blow-Out Plug made of?\u003c\/strong\u003e The 36153 plug is made of brass, chosen for durability during repeated seasonal winterizing use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Camco 36153 blow-out plug weigh?\u003c\/strong\u003e The Camco Brass Blow-Out Plug weighs 0.095 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Camco Brass Blow-Out Plug?\u003c\/strong\u003e The 36153 plug measures 5.50 x 3.63 x 1.24 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I use the blow-out plug to winterize my water lines?\u003c\/strong\u003e Screw the Camco Brass Blow-Out Plug into the city water inlet, open all drains and faucets, then attach and activate an air pump until all lines are clear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this plug be used for dewinterizing as well as winterizing?\u003c\/strong\u003e Yes, the Camco Brass Blow-Out Plug (36153) can be used both to clear lines before adding antifreeze in fall and to clear lines again in spring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Camco 36153 plug?\u003c\/strong\u003e The product is a single brass blow-out plug (UPC 014717361538); an air pump or compressor is needed separately to use it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the blow-out plug require any tools to install?\u003c\/strong\u003e No tools are required; the 36153 plug simply screws by hand into the city water inlet before air is applied.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Camco Brass Blow-Out Plug reusable each year?\u003c\/strong\u003e Yes, the brass construction of the 36153 plug is designed to be reused for seasonal winterizing and dewinterizing.\u003c\/p\u003e","brand":"Camco","offers":[{"title":"Default Title","offer_id":49027482845403,"sku":"CAM-36153","price":6.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-4__04563.1763741589.500.750.jpg?v=1785163589"},{"product_id":"dometic-hose-mender-kit-for-1-5-inch-odorsafe-plus-sanitation-hose","title":"Dometic Hose Mender Kit for 1.5 Inch OdorSafe Plus Sanitation Hose","description":"\u003cp\u003eThe Dometic Hose Mender Kit is a repair fitting designed to connect two ends of 1.5 inch (38 mm) ID sanitation hose together, making it possible to fix a damaged hose run or extend plumbing without replacing an entire length of hose. It is intended primarily for use with OdorSafe Plus 1.5 inch sanitation hose, the odor-barrier hose commonly used in marine holding tank and head plumbing systems. The kit includes two custom hose adapters that seat into each hose end, allowing the two sections to be rejoined into a single, continuous line. This makes the mender useful both for simple point-to-point repairs and for more complicated plumbing runs where a hose needs to be spliced or rerouted around an obstruction. Compact dimensions keep the fitting easy to work with in tight bilge and head compartments where sanitation hose is typically routed. Because it is built specifically for OdorSafe Plus hose, using this mender helps preserve the odor-sealing performance of the hose run rather than relying on a generic splice.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dometic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 307230310\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Connection Size:\u003c\/strong\u003e 1.5 inches (38 mm) ID\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2 1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2 1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 087735100984\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Hose:\u003c\/strong\u003e OdorSafe Plus 1.5 inch sanitation hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Two custom hose adapters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Dometic Hose Mender Kit fit?\u003c\/strong\u003e It connects 1.5 inch (38 mm) inside-diameter hose ends together, and is intended primarily for use with OdorSafe Plus 1.5 inch sanitation hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with part number 307230310?\u003c\/strong\u003e The kit includes two custom hose adapters, which are what allow the two hose ends to be joined into a single connected run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this mender kit be used with any sanitation hose?\u003c\/strong\u003e The Dometic Hose Mender Kit is intended primarily for use with OdorSafe Plus sanitation hose in the 1.5 inch (38 mm) diameter size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Dometic Hose Mender Kit?\u003c\/strong\u003e It measures 6 inches deep, 2 1\/2 inches wide, and 2 1\/2 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the hose mender kit weigh?\u003c\/strong\u003e The Dometic Hose Mender Kit (307230310) weighs 0.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit meant for repairing a hose or for new plumbing installs?\u003c\/strong\u003e It accommodates both simple repairs and more complicated plumbing setups, since it is designed to join two 1.5 inch hose ends together in any run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the mender kit replace an entire section of sanitation hose?\u003c\/strong\u003e No, it does not replace a length of hose itself; it joins two existing 1.5 inch hose ends together using the included adapters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dometic Hose Mender Kit a genuine Dometic part?\u003c\/strong\u003e Yes, part number 307230310 is a Dometic-branded Hose Mender Kit, not a generic splice fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this hose mender typically used on a boat?\u003c\/strong\u003e It is used in marine sanitation hose runs, such as those connecting a marine toilet to a holding tank, wherever OdorSafe Plus 1.5 inch hose needs to be joined or repaired.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many adapters come with the Dometic Hose Mender Kit?\u003c\/strong\u003e The kit comes with two custom hose adapters, one for each hose end being connected.\u003c\/p\u003e","brand":"Dometic Sanitation","offers":[{"title":"Default Title","offer_id":49027492970715,"sku":"DOM-307230310","price":21.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DOM-307230310-Hose-Mender__26236.1739475425.500.750.jpg?v=1785163817"},{"product_id":"groco-ff-1125-full-flow-bronze-pipe-to-hose-fitting-1-inch-npt-x-1-1-8-inch-hose-id","title":"Groco FF-1125 Full Flow Bronze Pipe to Hose Fitting, 1 Inch NPT x 1-1\/8 Inch Hose ID","description":"\u003cp\u003eThe Groco FF-1125 Full Flow Pipe to Hose Fitting is a straight-through adapter that converts a 1 inch NPT threaded pipe connection to a 1-1\/8 inch ID hose barb, letting you transition cleanly from rigid plumbing to flexible marine hose without restricting flow. It is machined from C83600 bronze, a marine-grade alloy chosen for its resistance to corrosion in raw water and saltwater systems, making this fitting suitable for use on thru-hull plumbing, raw water intake and discharge lines, and other below-the-waterline or engine room connections where long-term reliability matters.\u003c\/p\u003e\u003cp\u003eThe fitting is UL Listed under UL 647B, the standard covering pipe fittings for marine and fuel\/water applications, giving installers assurance it meets recognized safety criteria for use aboard boats. Its full-flow bore design is engineered to minimize pressure loss compared to reduced-bore fittings, which is important on raw water cooling, bilge, and washdown circuits where restricted flow can affect pump performance or engine cooling. One end threads directly onto standard 1 inch NPT pipe or fittings, while the barbed end is sized for 1-1\/8 inch ID hose and is intended to be secured with appropriately sized hose clamps for a leak-free connection.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e FF-1125\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Bronze (C83600)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Thread Size:\u003c\/strong\u003e 1 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Barb Size:\u003c\/strong\u003e 1-1\/8 inch Hose ID\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e UL Listed 647B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 3 x 2 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 742985141933\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis fitting is a universal 1 inch NPT to 1-1\/8 inch hose adapter and is not restricted to a specific engine, drive, or boat model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Groco FF-1125 fitting do?\u003c\/strong\u003e The Groco FF-1125 is a full flow pipe to hose fitting that converts a 1 inch NPT threaded pipe connection to a 1-1\/8 inch ID hose barb, allowing rigid plumbing to transition to flexible hose without restricting flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the FF-1125 made from?\u003c\/strong\u003e It is machined from C83600 bronze, a corrosion-resistant alloy commonly used in marine plumbing for durability in raw water and saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the FF-1125 UL listed?\u003c\/strong\u003e Yes, the Groco FF-1125 is UL Listed under UL 647B, the safety standard for marine pipe fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does this fitting have?\u003c\/strong\u003e One end of the FF-1125 has a 1 inch NPT thread for connecting to standard pipe or fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose fits the barbed end?\u003c\/strong\u003e The barbed end of the FF-1125 is sized for 1-1\/8 inch ID hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the FF-1125 come with hose clamps?\u003c\/strong\u003e No, the FF-1125 is the bronze fitting itself; hose clamps sized for a 1-1\/8 inch ID hose should be purchased separately to secure the hose to the barb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the FF-1125 fitting?\u003c\/strong\u003e The Groco FF-1125 measures 3 x 2 x 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the FF-1125 weigh?\u003c\/strong\u003e The FF-1125 weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the FF-1125 work on a raw water cooling line?\u003c\/strong\u003e Yes, its full flow bore design minimizes pressure loss, making the FF-1125 suitable for raw water intake, discharge, and cooling line connections where flow restriction is a concern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fitting suitable for fuel systems?\u003c\/strong\u003e The FF-1125 is UL Listed under UL 647B, a standard that covers marine pipe fittings for fuel or water use, and is constructed of bronze for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the FF-1125 fit a specific boat model or engine?\u003c\/strong\u003e No, the Groco FF-1125 is a universal 1 inch NPT to 1-1\/8 inch hose fitting and is not limited to a specific engine, drive, or boat model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Groco FF-1125?\u003c\/strong\u003e The UPC for the Groco FF-1125 bronze pipe to hose fitting is 742985141933.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49027994419419,"sku":"GRO-FF1125","price":13.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/GRO-FF1125__16290.1722360681.500.750.jpg?v=1785164377"},{"product_id":"jabsco-1-inch-in-line-non-return-check-valve-part-29295-1000","title":"Jabsco 1 Inch In-Line Non-Return Check Valve - Part 29295-1000","description":"\u003cp\u003eThe Jabsco 29295-1000 is a 1 inch in-line non-return (check) valve built for marine suction hose lines. It is constructed from corrosion resistant plastic with a nitrile rubber valve, making it suited to the wet, salt-exposed environment inside a boat's bilge and plumbing runs. The valve is designed to fit simply into a 1 inch (25mm) bore suction hose, most commonly on the inlet side of a pump.\u003c\/p\u003e\u003cp\u003eIts primary function is to aid pump priming and to stop water from flowing backward through the suction line into the bilge once the pump shuts off. This keeps the pump primed for the next cycle and helps prevent unwanted water migration back through the system. The valve has two ports and an adjustable port configuration, so the hose connections can be angled for a convenient, kink-free routing during installation. The inlet is sized for a 1 inch bore hose while the outlet uses an NPT threaded connection.\u003c\/p\u003e\u003cp\u003eIn its in-line configuration the valve measures 108 mm long by 55 mm wide by 50 mm high and weighs approximately 0.2 pounds, making it compact enough to fit into tight bilge or plumbing compartments without adding significant weight to the system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 29295-1000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Lift check valve (non-return valve)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Connection Size:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Connection Type:\u003c\/strong\u003e 1 inch bore hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Connection Size:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Connection Type:\u003c\/strong\u003e NPT threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Ports:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e Adjustable, for convenient hose angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic body with nitrile rubber valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 108 mm long x 55 mm wide x 50 mm high (in-line configuration)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Jabsco 29295-1000 used for?\u003c\/strong\u003e The Jabsco 29295-1000 is a 1 inch in-line non-return valve that fits into a pump's suction hose to aid priming and prevent water from backflowing into the bilge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does this valve fit?\u003c\/strong\u003e It is sized for 1 inch (25mm) bore hose connections, with the inlet built for a 1 inch bore hose and the outlet using an NPT threaded connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should the 29295-1000 be installed?\u003c\/strong\u003e This valve is designed to fit in-line within a pump's suction hose, where it helps the pump hold prime and blocks backflow toward the bilge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the valve made from?\u003c\/strong\u003e The 29295-1000 has a corrosion resistant plastic body with a nitrile rubber valve, suited to marine bilge and plumbing environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this valve help the pump stay primed?\u003c\/strong\u003e Yes, aiding pump priming is one of the main functions of the Jabsco 29295-1000 non-return valve, along with blocking backflow into the bilge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 29295-1000?\u003c\/strong\u003e In its in-line configuration, the Jabsco 29295-1000 measures 108 mm long by 55 mm wide by 50 mm high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Jabsco 29295-1000 weigh?\u003c\/strong\u003e This non-return valve weighs approximately 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the hose ports be angled during installation?\u003c\/strong\u003e Yes, the 29295-1000 has an adjustable port configuration that allows the hose connections to be angled for a convenient routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a two-port valve?\u003c\/strong\u003e Yes, the Jabsco 29295-1000 is a two-port in-line check valve, with a 1 inch bore hose inlet and an NPT threaded outlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of check valve is the 29295-1000?\u003c\/strong\u003e It is classified as a lift check valve, functioning as a non-return valve for 1 inch suction hose lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 29295-1000 different from the 1.5 inch version?\u003c\/strong\u003e The 29295-1000 is sized for 1 inch hose connections; Jabsco also offers a 1.5 inch in-line non-return valve as a separate part for larger hose connections, so the correct size should be matched to the hose being used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type does the outlet use?\u003c\/strong\u003e The outlet on the Jabsco 29295-1000 uses NPT threading with a 1 inch thread size.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028222517467,"sku":"ITT-29295-1000","price":26.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Jabsco_1inch_In-Line_Non-Return_Valve__84620.1722510685.500.750.jpg?v=1785164572"},{"product_id":"jabsco-1-5-inch-in-line-non-return-check-valve-29295-1010","title":"Jabsco 1.5 Inch In-Line Non-Return Check Valve 29295-1010","description":"\u003cp\u003eThe Jabsco 1.5 Inch In-Line Non-Return Valve (29295-1010) is a check valve built from corrosion resistant materials and sized to fit 1.5 inch connections. It is designed to fit simply into a suction hose, where its main function is to aid in priming a pump and to prevent water from backflowing into the bilge once the pump shuts off. Because it installs directly in-line with the suction hose rather than requiring a separate housing or mounting bracket, it is a straightforward way to protect a water system's prime without adding significant bulk or complexity to the plumbing run.\u003c\/p\u003e\u003cp\u003eThe valve has an inlet connection sized for solder fitting and a barb-style outlet connection, both rated for 1.5 inch hose, with two ports total and NPT threading at the 1-1\/2 inch thread size. It is constructed of plastic and measures 7.4 x 7.5 x 7.8 inches. The valve meets ASSE, CE, ISO 9001, MSS SP 72, MSS SP 80, and UL standards. It is intended for use on suction-side plumbing in bilge, wash-down, and general water system installations that use 1.5 inch hose.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 29295-1010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Check valve \/ non-return valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Size:\u003c\/strong\u003e 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Connection Type:\u003c\/strong\u003e Solder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Connection Type:\u003c\/strong\u003e Barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Ports:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 7.4 x 7.5 x 7.8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards Met:\u003c\/strong\u003e ASSE, CE, ISO 9001, MSS SP 72, MSS SP 80, UL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 671880593274\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Jabsco 29295-1010 fit?\u003c\/strong\u003e The Jabsco 29295-1010 is designed to fit 1.5 inch connections and installs directly in-line with a 1.5 inch suction hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does this valve do?\u003c\/strong\u003e Its main function is to fit into a pump's suction hose to aid in priming and to prevent water from backflowing into the bilge, working as a non-return check valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 29295-1010 valve?\u003c\/strong\u003e The Jabsco 29295-1010 measures 7.4 x 7.5 x 7.8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this valve weigh?\u003c\/strong\u003e The Jabsco 1.5 inch In-Line Non-Return Valve weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Jabsco 29295-1010 made from?\u003c\/strong\u003e It is made of plastic and is constructed from corrosion resistant materials, which is important for a valve used in a marine suction hose environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of connections does this valve use?\u003c\/strong\u003e The 29295-1010 has a solder-type inlet connection and a barb-type outlet connection, both sized for 1.5 inch hose, with 1-1\/2 inch NPT threading and two ports total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Jabsco 29295-1010 meet any industry standards?\u003c\/strong\u003e Yes, this valve meets ASSE, CE, ISO 9001, MSS SP 72, MSS SP 80, and UL standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 29295-1010 the same valve as the 1 inch or 3\/4 inch Jabsco non-return valves?\u003c\/strong\u003e No, the 29295-1010 is the 1.5 inch version; Jabsco's 1 inch and 3\/4 inch in-line non-return valves are separate parts with their own part numbers, so buyers should confirm hose size before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should the 29295-1010 be installed?\u003c\/strong\u003e This valve fits simply into the suction hose of a pump, where it aids in priming and stops backflow of water into the bilge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Jabsco 29295-1010 genuine Jabsco or an aftermarket part?\u003c\/strong\u003e The 29295-1010 is a genuine Jabsco 1.5 inch In-Line Non-Return Valve, identified by UPC 671880593274.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this valve be used on wash-down or general water system plumbing?\u003c\/strong\u003e Yes, the 1.5 inch connection size and barb\/solder fitting design make the 29295-1010 suitable for suction-side plumbing on water systems using 1.5 inch hose, in addition to bilge pump priming applications.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028222550235,"sku":"ITT-29295-1010","price":35.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Jabsco_1.5inch_In-Line_Non-Return_Valve__64880.1722369910.500.750.jpg?v=1785164572"},{"product_id":"jabsco-31911-0000-flush-mount-stainless-steel-water-hose-deck-fitting-1-2-in-npt-to-3-4-in-ght","title":"Jabsco 31911-0000 Flush Mount Stainless Steel Water Hose Deck Fitting, 1\/2 in NPT to 3\/4 in GHT","description":"\u003cp\u003eThe Jabsco 31911-0000 is a flush mount water hose deck fitting with hose connector, built to give a washdown or garden-style hose a clean, quick-release connection point on deck. It provides the installation solution for connecting a hose coil and trigger nozzle above deck to a pump and hose line run below decks, so the hose can be stowed out of the way when not in use. The fitting is machined from 316 stainless steel for corrosion resistance in a marine environment, and it uses a positive bayonet lock design that allows the hose to be connected and disconnected under full system pressure, without needing to shut off the pump first. Two Viton O-rings seal the connection to prevent leaks at the deck penetration. On the hose side, the fitting steps down from 1\/2 inch NPT to 3\/4 inch garden hose thread (GHT) for use with standard US garden hose fittings, making it compatible with common washdown hose and reel setups. Installation is straightforward, requiring only a through-deck hole sized for the 1\/2 inch NPT fitting. It is backed by a 1 year warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 31911-0000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Quick-Release Bayonet Coupling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/2 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Thread:\u003c\/strong\u003e 3\/4 inch Garden Hose Thread (GHT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-Ring Seal:\u003c\/strong\u003e Double Viton O-Rings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9 x 7 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\/2 inch NPT connection on the deck side, stepping down to 3\/4 inch garden hose thread (GHT) for US use\u003c\/li\u003e\n\u003cli\u003eCompatible with Jabsco hose coils and trigger nozzles that use the matching bayonet connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Jabsco 31911-0000 used for?\u003c\/strong\u003e It is a flush mount deck fitting that lets you connect a washdown or garden-style hose to a pump line installed below decks, so the hose coil and trigger nozzle can be stowed out of the way when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the hose be disconnected while the system is pressurized?\u003c\/strong\u003e Yes, the 31911-0000 uses a positive bayonet lock connector that allows connection and disconnection under full pressure, so there is no need to depressurize the line first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Jabsco 31911-0000 made from?\u003c\/strong\u003e The mount is machined from 316 stainless steel, chosen for its corrosion resistance in saltwater and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does this deck fitting use?\u003c\/strong\u003e The deck side uses a 1\/2 inch NPT connection, which steps down to 3\/4 inch garden hose thread (GHT) for standard US garden hose fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 31911-0000 include a sealing system to prevent leaks?\u003c\/strong\u003e Yes, the fitting is sealed with double Viton O-rings at the connection point to prevent water intrusion at the deck penetration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Jabsco 31911-0000 installed?\u003c\/strong\u003e It installs through a deck-mounted hole sized for its 1\/2 inch NPT threads, connecting to a hose line run below decks; no special tools are required beyond a standard through-hull style installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fitting come with a warranty?\u003c\/strong\u003e The Jabsco 31911-0000 flush mount deck fitting carries a 1 year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the 31911-0000?\u003c\/strong\u003e The Jabsco 31911-0000 measures 9 x 7 x 4 inches and weighs 1.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Jabsco 31911-0000 compatible with any garden hose?\u003c\/strong\u003e The 3\/4 inch GHT connection is designed for standard US garden hose thread, so it will mate with typical washdown hoses and reels using that same thread standard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the fitting corrode from saltwater exposure?\u003c\/strong\u003e No, the 316 stainless steel construction of the 31911-0000 is specifically chosen to resist corrosion from saltwater and marine exposure.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028222910683,"sku":"ITT-31911-0000","price":155.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31911-0000__16663.1722384002.500.750.jpg?v=1785164577"},{"product_id":"johnson-pump-09-46939-klicktite-90-degree-3-4-inch-port-connectors-pair","title":"Johnson Pump 09-46939 Klicktite 90 Degree 3\/4 Inch Port Connectors - Pair","description":"\u003cp\u003eThe Johnson Pump 09-46939 Klicktite Port Connectors are a pair of 90 degree, 3\/4 inch hose fittings designed to let boat owners quickly disconnect a hose from a pump or unit for thorough cleaning. Because the fitting separates without tools, the entire unit can be pulled for servicing wherever is most convenient, and the system can be drained quickly during winterizing without needing any special tools.\u003c\/p\u003e\u003cp\u003eEach connector uses a plug-style Klicktite design with a plastic body, brass exterior finish, and UNF thread type, finished in white. The connectors are sized for 3\/4 inch hose and set at a 90 degree angle, making them suited to tight installation spaces where a straight fitting would not fit. Sold as a pair, they are commonly used on Johnson Pump wash down and water system hose runs to simplify seasonal maintenance and cleaning.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Johnson Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 09-46939\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Angle:\u003c\/strong\u003e 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 pieces (pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic with brass exterior finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e UNF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 6.0 inches L x 7.0 inches W x 8.0 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7330717001452\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 3\/4 inch hose diameter; no specific engine, make, or model fitment is specified for this part.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size do the Johnson Pump 09-46939 port connectors fit?\u003c\/strong\u003e The Johnson Pump 09-46939 Klicktite Port Connectors are sized for 3\/4 inch hose and set at a 90 degree angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many connectors are included?\u003c\/strong\u003e The 09-46939 is sold as a pair, so two connectors come in each set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle are these fittings?\u003c\/strong\u003e These Klicktite port connectors are set at a 90 degree angle, which helps them fit in tight installation spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the 09-46939 connectors made of?\u003c\/strong\u003e They are made of plastic with a brass exterior finish, and use a UNF thread type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the Johnson Pump 09-46939 port connectors?\u003c\/strong\u003e The connectors are white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan these connectors be used for winterizing?\u003c\/strong\u003e Yes, the 09-46939 port connectors allow the system to be drained quickly during winterizing without needing special tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these connectors allow the pump or unit to be removed for cleaning?\u003c\/strong\u003e Yes, the Klicktite design lets the entire unit be removed for thorough cleaning wherever is most convenient.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of connector is the 09-46939?\u003c\/strong\u003e It is a plug-style Klicktite connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much do the 09-46939 port connectors weigh?\u003c\/strong\u003e The Johnson Pump 09-46939 port connector pair weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the 09-46939?\u003c\/strong\u003e The package measures 6.0 inches long by 7.0 inches wide by 8.0 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these fit any hose diameter?\u003c\/strong\u003e No, the 09-46939 Klicktite Port Connectors are specifically sized for 3\/4 inch hose.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":49028225532123,"sku":"JON-09-46939","price":14.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/JON-09-46939.1__34355.1722518490.500.750.jpg?v=1785164626"},{"product_id":"johnson-pump-09-60616-expandable-wash-down-hose-with-nozzle-25-feet-blue","title":"Johnson Pump 09-60616 Expandable Wash Down Hose with Nozzle, 25 Feet, Blue","description":"\u003cp\u003eThe Johnson Pump 09-60616 is an expandable flexible wash down hose with an included spray nozzle, designed as a replacement hose for Johnson Pump Wash Down Kits. Built from durable plastic, the hose expands to a full 25 feet, giving you plenty of reach around the deck, cockpit, and hull without the bulk of a traditional coiled garden hose. When not in use, it contracts back down for compact, tangle-free storage, making it easy to stow in a locker or hang on a hook.\u003c\/p\u003e\u003cp\u003eThis hose is portable and easy to use, making it well suited for rinsing off gear, washing down the boat after a day on the water, or filling buckets at the dock. The blue color makes it easy to identify at a glance among other hoses and gear aboard. It is manufactured in the USA and specifically designed to pair with SPX Flow Johnson Pump wash down pumps, so it fits the pump system it was engineered for without adapters or modifications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Johnson Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 09-60616\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpanded Length:\u003c\/strong\u003e 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 300 inches L x 0.62 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 0.63 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 729321218887\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eJohnson Pump Wash Down Kits and SPX Flow Johnson Pump wash down pumps\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long does the Johnson Pump 09-60616 hose extend to?\u003c\/strong\u003e The Johnson Pump 09-60616 is expandable up to 25 feet, giving long reach for wash down tasks while contracting down for compact storage when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hose include a spray nozzle?\u003c\/strong\u003e Yes, the Johnson Pump 09-60616 comes with a spray nozzle included, so it is ready to connect and use for wash down duty right out of the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Johnson Pump 09-60616 hose made of?\u003c\/strong\u003e It is made of plastic, which allows the hose to expand and contract while remaining lightweight and easy to handle on deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 09-60616 wash down hose?\u003c\/strong\u003e The 09-60616 is blue, making it easy to spot among other hoses and equipment stored on the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outside diameter of this hose?\u003c\/strong\u003e The Johnson Pump 09-60616 has an outside diameter of 0.63 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Johnson Pump 09-60616 hose weigh?\u003c\/strong\u003e This hose weighs 0.9 pounds, keeping it light for stowing and handling around the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat pumps or kits is the 09-60616 hose designed for?\u003c\/strong\u003e The 09-60616 is a replacement hose designed for Johnson Pump Wash Down Kits and is specifically built to pair with SPX Flow Johnson Pump wash down pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 09-60616 hose made in the USA?\u003c\/strong\u003e Yes, the Johnson Pump 09-60616 wash down hose is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 09-60616 hose be used for tasks beyond boat wash down?\u003c\/strong\u003e The hose is portable and easy to use for general rinsing tasks such as washing off gear or filling buckets at the dock, in addition to its primary role in a Johnson Pump wash down system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the hose stay tangle-free when stored?\u003c\/strong\u003e Because the 09-60616 is expandable, it contracts back down to a compact size for tangle-free storage when not extended for use.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":49028225564891,"sku":"JON-09-60616","price":39.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/JON-09-60616__38619.1722485413.500.750.jpg?v=1785164630"},{"product_id":"johnson-pump-10615-00-black-coiled-washdown-hose-25-feet","title":"Johnson Pump 10615-00 Black Coiled Washdown Hose, 25 Feet","description":"\u003cp\u003eThe Johnson Pump 10615-00 is a black coiled washdown hose built for rinsing down decks, gear, and equipment on board. Made from durable plastic, the hose is coiled for compact storage and self-retracts to keep deck space clear when not in use, which reduces trip hazards and tangling compared to a straight-length hose. At 25 feet, it gives boaters enough reach to cover a deck, cockpit, or swim platform from a single washdown outlet without dragging a bulky hose around. The 0.5 inch outside diameter and matching wall thickness keep the hose lightweight and flexible while coiled, so it extends and retracts easily during use. This hose is a universal fit, meaning it is designed to work with standard marine washdown pump and fitting setups rather than one specific pump model, making it a straightforward replacement or upgrade for an existing washdown hose that has cracked, kinked, or worn out. It ships coiled with overall dimensions of approximately 18 inches long by 5 inches wide in its coiled state, and weighs 1.8 pounds. Whether replacing a damaged factory hose or adding a dedicated washdown line to a boat, the Johnson Pump 10615-00 offers a simple, durable, marine-grade solution for freshwater or saltwater rinse-down tasks.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Johnson Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 10615-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Coiled Washdown Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Wall Thickness:\u003c\/strong\u003e 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoiled Dimensions:\u003c\/strong\u003e 18 inches L x 5 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 729321106153\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Johnson Pump 10615-00?\u003c\/strong\u003e The Johnson Pump 10615-00 is a black coiled washdown hose used for rinsing down decks, gear, and equipment on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Johnson Pump 10615-00 hose?\u003c\/strong\u003e It measures 25 feet in length, giving enough reach to cover most deck and cockpit areas from a single washdown connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hose fit my washdown pump?\u003c\/strong\u003e The Johnson Pump 10615-00 is a universal fit hose, meaning it is designed to work with standard marine washdown pump and fitting setups rather than being limited to one specific pump model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 10615-00 hose made from?\u003c\/strong\u003e This coiled washdown hose is made from plastic, chosen for flexibility and durability in marine wash-down use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Johnson Pump 10615-00 hose?\u003c\/strong\u003e The 10615-00 is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the diameter of the coiled washdown hose?\u003c\/strong\u003e The Johnson Pump 10615-00 has an outside diameter of 0.5 inches and a nominal wall thickness of 0.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Johnson Pump 10615-00 weigh?\u003c\/strong\u003e The hose weighs 1.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the coiled dimensions of this hose?\u003c\/strong\u003e In its coiled state, the Johnson Pump 10615-00 measures approximately 18 inches long by 5 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Johnson Pump 10615-00 easy to install?\u003c\/strong\u003e Yes. As a universal-fit coiled hose, the 10615-00 connects to standard marine washdown fittings, making it a straightforward swap for a worn or damaged washdown hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a coiled hose over a straight washdown hose?\u003c\/strong\u003e A coiled design like the Johnson Pump 10615-00 self-retracts for compact storage, helping keep deck space clear and reducing tangling compared to a straight-length hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 10615-00 a genuine Johnson Pump product?\u003c\/strong\u003e Yes, the 10615-00 is a genuine Johnson Pump coiled washdown hose, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Johnson Pump 10615-00 come with?\u003c\/strong\u003e The 10615-00 is supplied as the 25 foot black coiled washdown hose itself, ready to connect to an existing washdown pump and fitting setup.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":49028227006683,"sku":"JON-10615-00","price":49.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/JON-10615-00__83434.1722503898.500.750.jpg?v=1785164650"},{"product_id":"groco-bronze-pipe-nipple-1-inch-npt-thread","title":"Groco Bronze Pipe Nipple, 1 Inch NPT Thread","description":"\u003cp\u003eThis Groco bronze pipe nipple is a short, fully-threaded connector fitting sized for 1 inch NPT (National Pipe Thread) plumbing runs. It is designed to join two threaded fittings, such as a seacock, strainer, valve, or hose adapter, into a single continuous line, and is commonly used in below-waterline thru-hull plumbing systems where a corrosion-resistant, marine-grade connector is required. The nipple is built in bronze with a bronze exterior finish, giving it strong resistance to saltwater corrosion compared to standard plated-steel or plastic hardware, making it suitable for long-term use in wet bilge and below-waterline environments. Its compact dimensions of 3 x 2 x 2 inches allow it to fit into tight plumbing runs without requiring extra clearance. As a standard 1 inch NPT nipple, it is compatible with any fitting, valve, seacock, or adapter that uses a matching 1 inch NPT female thread, making it a straightforward drop-in connector for repairs, replacements, or new plumbing installations. Because it is a generic threaded connector rather than a model-specific replacement part, it is not tied to a particular engine or boat model and instead fits based on matching thread size and type.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PN-1000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Nipple\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3 x 2 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.38 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 742985143654\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does this pipe nipple use?\u003c\/strong\u003e The Groco PN-1000 pipe nipple is threaded for 1 inch NPT (National Pipe Thread) connections on both ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the PN-1000 pipe nipple made from?\u003c\/strong\u003e It is made from bronze with a bronze exterior finish, which resists corrosion in saltwater plumbing environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this nipple fit my seacock or strainer?\u003c\/strong\u003e Yes, as long as the seacock, strainer, valve, or fitting has a 1 inch NPT female thread, the Groco PN-1000 nipple will thread in and connect the two components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the PN-1000?\u003c\/strong\u003e The Groco bronze pipe nipple measures 3 x 2 x 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the PN-1000 pipe nipple weigh?\u003c\/strong\u003e This Groco fitting weighs 0.38 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this nipple compatible with plastic or PVC thru-hull fittings?\u003c\/strong\u003e Yes, the Groco PN-1000 uses a standard 1 inch NPT thread, so it can be threaded into any fitting with a matching 1 inch NPT female thread regardless of the mating fitting's material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a pipe nipple the same as a hose barb?\u003c\/strong\u003e No, the PN-1000 is a fully-threaded nipple designed to connect two threaded (NPT) fittings, not a barbed fitting for hose clamping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this fitting typically used for?\u003c\/strong\u003e The Groco bronze pipe nipple is typically used to join threaded plumbing components, such as a seacock, strainer, or valve, in below-waterline marine plumbing systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this part come with any additional hardware?\u003c\/strong\u003e The listing covers the Groco PN-1000 bronze pipe nipple itself; no additional hardware is specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PN-1000 specific to a certain boat model or engine?\u003c\/strong\u003e No, the PN-1000 is a generic 1 inch NPT bronze pipe nipple, so it fits based on matching thread size rather than a specific boat model or engine.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49031097385179,"sku":"GRO-PN-1000","price":13.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61YmqTsDPXL.jpg?v=1785208678"},{"product_id":"groco-bronze-pipe-nipple-3-4-inch-pn-750","title":"Groco Bronze Pipe Nipple, 3\/4 Inch, PN-750","description":"\u003cp\u003eThe Groco PN-750 is a 3\/4 inch bronze pipe nipple used to connect thru hull fittings, seacocks, strainers, and other below-waterline plumbing components in a boat's raw water system. Bronze construction resists the corrosive effects of saltwater and brackish water better than plain steel or plastic fittings, making it a durable choice for below-waterline connections where reliability matters. As a straight pipe nipple, it threads into mating fittings on both ends to join sections of a thru hull plumbing run, extend a fitting, or connect a strainer to a seacock or hose adapter. At 0.175 pounds, it is a compact, lightweight component sized for 3\/4 inch plumbing runs. Bronze pipe nipples like the PN-750 are a standard part of thru hull and strainer installations, and are commonly kept on hand as a spare when servicing or upgrading a boat's underwater fittings.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PN-750\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Thru Hull Fittings and Strainers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.175 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Groco PN-750 used for?\u003c\/strong\u003e The Groco PN-750 is a 3\/4 inch bronze pipe nipple used to connect thru hull fittings, seacocks, and strainers in a boat's below-waterline plumbing system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the PN-750 pipe nipple made from?\u003c\/strong\u003e It is made from bronze, which resists corrosion from saltwater and brackish water better than steel or plastic, making the Groco PN-750 suitable for below-waterline marine plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Groco PN-750?\u003c\/strong\u003e The PN-750 is a 3\/4 inch pipe nipple, sized to connect with 3\/4 inch thru hull fittings, seacocks, and strainer plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the PN-750 weigh?\u003c\/strong\u003e The Groco PN-750 bronze pipe nipple weighs 0.175 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PN-750 a straight pipe nipple?\u003c\/strong\u003e Yes, the PN-750 is a straight pipe nipple that threads into mating fittings on both ends to join sections of plumbing or extend a fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the PN-750 be used to connect a strainer to a seacock?\u003c\/strong\u003e Yes, the Groco PN-750 bronze pipe nipple is designed for use in thru hull fittings and strainer installations, including connecting a strainer to a seacock or hose adapter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose bronze over a plastic or steel pipe nipple?\u003c\/strong\u003e Bronze resists corrosion from prolonged saltwater and brackish water exposure better than plain steel or plastic, which is why Groco makes the PN-750 in bronze for below-waterline marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PN-750 genuine Groco or an aftermarket part?\u003c\/strong\u003e The PN-750 is a genuine Groco part, identified by its manufacturer part number PN-750.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Groco PN-750 suitable for below-waterline installation?\u003c\/strong\u003e Yes, its bronze construction is intended for below-waterline marine plumbing applications such as thru hull fittings and strainers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the PN-750 come as a single nipple or a kit?\u003c\/strong\u003e The Groco PN-750 is sold as a single bronze pipe nipple.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49031097483483,"sku":"GRO-PN-750","price":8.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_c76645cf-8089-4b36-960b-193250ff020f.jpg?v=1785352892"},{"product_id":"groco-bronze-pipe-to-hose-fitting-3-4-inch-npt-x-3-4-inch-id-straight-barb","title":"Groco Bronze Pipe to Hose Fitting, 3\/4 Inch NPT x 3\/4 Inch ID, Straight Barb","description":"\u003cp\u003eThe Groco PTH-750 is a bronze straight fitting that joins 3\/4 inch NPT pipe thread to 3\/4 inch ID hose. One end is machined with 3\/4 inch NPT pipe threads for direct connection into a thru-hull, seacock, pump, or other threaded fitting, while the opposite end is a hose barb sized for 3\/4 inch ID hose, secured with a hose clamp. The straight, in-line design makes it a simple way to transition from rigid pipe thread to flexible hose without a change in direction, which keeps plumbing runs compact where space is limited.\u003c\/p\u003e\u003cp\u003eBronze construction gives the PTH-750 resistance to corrosion in marine environments, making it suitable for use in raw water plumbing, thru-hull connections, and other onboard systems where a durable metal fitting is preferred over plastic. The fitting is compact, measuring 3 x 1 x 1 inches and weighing 0.19 pounds, so it fits into tight spaces around thru-hulls, strainers, and pump inlets\/outlets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PTH-750\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Style:\u003c\/strong\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Thread Size:\u003c\/strong\u003e 3\/4 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 3\/4 inch ID\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3 x 1 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.19 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 742985004924\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose and pipe does the Groco PTH-750 fit?\u003c\/strong\u003e The PTH-750 connects 3\/4 inch NPT pipe thread on one end to 3\/4 inch ID hose on the other end via a barb fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Groco PTH-750 made of bronze?\u003c\/strong\u003e Yes, the PTH-750 is a bronze fitting, giving it corrosion resistance for marine plumbing use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of thread is on the pipe end of this fitting?\u003c\/strong\u003e The pipe end of the PTH-750 uses 3\/4 inch NPT (National Pipe Thread) threading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PTH-750 a straight fitting or an elbow?\u003c\/strong\u003e It is a straight, in-line fitting, transitioning from pipe thread to hose barb without a change in direction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Groco PTH-750 weigh?\u003c\/strong\u003e The PTH-750 weighs 0.19 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this fitting?\u003c\/strong\u003e The Groco PTH-750 measures 3 x 1 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the hose barb end need a hose clamp?\u003c\/strong\u003e Yes, the barb end of the PTH-750 is designed to be secured with a hose clamp for a leak-free connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the PTH-750 be used in thru-hull plumbing?\u003c\/strong\u003e Bronze construction makes the PTH-750 suitable for thru-hull and raw water plumbing connections where a durable metal fitting is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this fitting?\u003c\/strong\u003e The Groco PTH-750 has UPC 742985004924.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use a pipe-to-hose fitting instead of connecting hose directly to threaded ports?\u003c\/strong\u003e The PTH-750 provides a proper NPT thread connection on one side and a hose barb on the other, allowing flexible hose to be clamped securely to a threaded port or fitting.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49031097745627,"sku":"GRO-PTH-750","price":6.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/519ZPQY7g7L_8cc25183-b550-4e7a-b782-ca02c956c964.jpg?v=1785208686"},{"product_id":"groco-pthc-1000-90-degree-bronze-pipe-to-hose-adapter-1-inch-npt-x-1-inch-hose","title":"Groco PTHC-1000 90 Degree Bronze Pipe-to-Hose Adapter, 1 Inch NPT x 1 Inch Hose","description":"\u003cp\u003eThe Groco PTHC-1000 is a 90 degree bronze pipe-to-hose adapter designed to connect a 1 inch NPT pipe fitting to 1 inch ID hose at a right angle, making it a common choice for routing plumbing and cooling lines in tight spaces where a straight fitting will not fit. It is machined from C83600 bronze for corrosion resistance in marine and wet environments, and it is UL Listed 647B for standard flow applications. The 90 degree elbow design lets installers change hose direction without adding a separate fitting or extra hose length, simplifying runs through bulkheads, engine compartments, and thru-hull plumbing.\u003c\/p\u003e\u003cp\u003eThe adapter terminates in a barbed hose end measuring 1.38 inches in length, giving the hose clamp adequate surface area to seat securely, while the opposite end threads onto standard 1 inch NPT pipe. Important: this fitting is not intended for use in potable water systems, as C83600 bronze fittings are not NSF-61 compliant for drinking water applications. It is best suited for non-potable marine plumbing such as raw water intake, drainage, or cooling circuits.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PTHC-1000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 90 Degree Pipe-to-Hose Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Bronze (C83600)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNPT Pipe Size:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Barb Length:\u003c\/strong\u003e 1.38 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Type:\u003c\/strong\u003e Standard Flow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e UL Listed 647B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 6.25 x 6.25 x 6.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4375 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePotable Water Use:\u003c\/strong\u003e Not intended for potable water systems (not NSF-61 compliant)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat sizes does the Groco PTHC-1000 connect?\u003c\/strong\u003e The Groco PTHC-1000 connects a 1 inch NPT pipe thread to 1 inch ID hose through a 90 degree bronze elbow adapter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the PTHC-1000 be used for drinking water plumbing?\u003c\/strong\u003e No. The PTHC-1000 is made from C83600 bronze, which is not NSF-61 compliant, so it is not intended for use in potable water systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Groco PTHC-1000 made from?\u003c\/strong\u003e It is machined from C83600 bronze, a corrosion-resistant alloy commonly used in marine plumbing fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I choose a 90 degree adapter instead of a straight fitting?\u003c\/strong\u003e A 90 degree adapter like the PTHC-1000 changes hose direction at the fitting itself, which helps route hose through tight spaces such as bulkheads or engine compartments without adding extra hose length or a separate elbow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the hose barb on the PTHC-1000?\u003c\/strong\u003e The hose barb end of the PTHC-1000 measures 1.38 inches in length, providing surface area for a secure hose clamp connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PTHC-1000 UL listed?\u003c\/strong\u003e Yes, the Groco PTHC-1000 is UL Listed 647B.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rating of this adapter?\u003c\/strong\u003e The PTHC-1000 is rated for standard flow applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Groco PTHC-1000 weigh?\u003c\/strong\u003e The PTHC-1000 weighs 0.4375 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type does the PTHC-1000 use?\u003c\/strong\u003e The pipe end of the PTHC-1000 uses NPT (National Pipe Thread) threading in a 1 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does the PTHC-1000 come in?\u003c\/strong\u003e The Groco PTHC-1000 has a bronze finish, consistent with its C83600 bronze construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PTHC-1000 sold as a single piece?\u003c\/strong\u003e Yes, the PTHC-1000 is sold as one adapter fitting per unit.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49031097778395,"sku":"GRO-PTHC-1000","price":17.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61KEgl7a59L.jpg?v=1785208687"},{"product_id":"groco-90-degree-bronze-pipe-to-hose-adapter-1-1-4-inch-npt-to-hose","title":"Groco 90 Degree Bronze Pipe to Hose Adapter, 1-1\/4 Inch NPT to Hose","description":"\u003cp\u003eThis Groco pipe to hose adapter converts a 1-1\/4 inch NPT pipe fitting to a 1-1\/4 inch ID hose connection using a 90 degree sweep design that keeps water flow unrestricted through the bend. Built in cast bronze, the fitting is designed for use with plumbing systems that share the same hose inside diameter as the pipe thread, making it a straightforward way to transition between rigid pipe and flexible hose runs below the waterline or anywhere corrosion resistance matters.\u003c\/p\u003e\u003cp\u003eA generous hex nut is cast directly into the body, giving installers a solid gripping surface for secure tightening with a wrench during installation, without needing a separate fitting or strap wrench. The hose barb end is sized with sufficient seating area to support double-clamping, which is the standard practice for any fitting located below the waterline or on a through-hull connection, helping prevent hose slippage and leaks over time. The 90 degree sweep configuration lets the adapter change direction in tight spaces while minimizing flow restriction compared to a sharp-angle elbow.\u003c\/p\u003e\u003cp\u003ePart number PTHC-1250 is threaded with NPTHC (National Pipe Thread Hose Coupling) threads at the 1-1\/4 inch size, making it suited for use with thru-hull fittings, strainers, and other bronze plumbing components in the same size range.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PTHC-1250\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Pipe to Hose Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e 90 Degree Sweep Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPTHC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1-1\/4 inch inside diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.69 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6.25 x 6.25 x 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 742985005013\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the PTHC-1250 adapter connect?\u003c\/strong\u003e PTHC-1250 converts a 1-1\/4 inch NPT pipe thread to a 1-1\/4 inch ID hose connection, letting you transition from rigid pipe to flexible hose in the same plumbing run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fitting bronze or plastic?\u003c\/strong\u003e The Groco PTHC-1250 adapter is made of cast bronze, not plastic, for corrosion resistance in marine plumbing applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is it called a 90 degree sweep design?\u003c\/strong\u003e The PTHC-1250 uses a sweep 90 degree bend rather than a sharp right-angle elbow, which allows water to flow through the turn with less restriction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I double-clamp the hose end of this fitting?\u003c\/strong\u003e Yes, the PTHC-1250 has sufficient hose seating area to support double-clamping, which is recommended for below-waterline or through-hull connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type does PTHC-1250 use?\u003c\/strong\u003e It uses NPTHC (National Pipe Thread Hose Coupling) threads sized at 1-1\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fitting have a built-in hex for tightening?\u003c\/strong\u003e A generous hex nut is cast into the body of the PTHC-1250, giving you a solid surface to grip with a wrench when tightening the fitting into place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the PTHC-1250 adapter?\u003c\/strong\u003e The Groco PTHC-1250 measures 6.25 x 6.25 x 2.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this adapter weigh?\u003c\/strong\u003e The PTHC-1250 pipe to hose adapter weighs 0.69 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size should I use with this adapter?\u003c\/strong\u003e Use hose with a 1-1\/4 inch inside diameter, matching the same size as the pipe thread on the PTHC-1250.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a straight or angled adapter?\u003c\/strong\u003e The PTHC-1250 is a 90 degree angled adapter, not a straight fitting, allowing it to change direction in a plumbing run.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49031097811163,"sku":"GRO-PTHC-1250","price":24.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61yZYvyEL_L.jpg?v=1785208687"},{"product_id":"groco-pthc-1500-bronze-90-degree-pipe-to-hose-adapter-1-1-2-inch-npt-x-1-1-2-inch-hose-standard-flow","title":"Groco PTHC-1500 Bronze 90 Degree Pipe to Hose Adapter, 1-1\/2 Inch NPT x 1-1\/2 Inch Hose, Standard Flow","description":"\u003cp\u003eThe Groco PTHC-1500 is a 90 degree bronze pipe-to-hose adapter built for standard flow plumbing runs where a rigid NPT pipe connection needs to transition into flexible hose. Cast in solid bronze for corrosion resistance in onboard marine plumbing systems, this elbow fitting joins a 1-1\/2 inch NPT pipe thread on one end to a 1-1\/2 inch inside diameter hose barb on the other, with the 90 degree bend allowing the hose run to change direction without a separate elbow and hose clamp assembly. It is commonly installed alongside thru-hull fittings and strainers, routing water into or out of a hull fitting through hose rather than rigid pipe.\u003c\/p\u003e\u003cp\u003eThe bronze construction gives the fitting a durable, corrosion-resistant finish suited to continuous exposure to raw water and marine environments. The standard flow design (as opposed to a full-flow bore) is sized for typical onboard plumbing demands such as washdown, bilge, or raw water intake and discharge lines. The fitting measures 6.25 x 6.25 x 6.5 inches overall and weighs 0.95 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PTHC-1500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e 90 Degree Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Type:\u003c\/strong\u003e Standard Flow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Thread Size:\u003c\/strong\u003e 1-1\/2 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Inside Diameter:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 6.25 x 6.25 x 6.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.95 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 742985005020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits 1-1\/2 inch NPT pipe thread connections\u003c\/li\u003e\n\u003cli\u003eFits hose with a 1-1\/2 inch inside diameter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Groco PTHC-1500 connect?\u003c\/strong\u003e The Groco PTHC-1500 connects a 1-1\/2 inch NPT pipe thread to 1-1\/2 inch inside diameter hose, with a 90 degree bend built into the fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PTHC-1500 made of bronze?\u003c\/strong\u003e Yes, the Groco PTHC-1500 pipe-to-hose adapter is made of bronze, giving it a corrosion-resistant finish for marine plumbing use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hose size for the PTHC-1500?\u003c\/strong\u003e The Groco PTHC-1500 accepts hose with a 1-1\/2 inch inside diameter on its hose barb end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat pipe thread size does the PTHC-1500 use?\u003c\/strong\u003e 1-1\/2 inch NPT is the pipe thread size on the Groco PTHC-1500 adapter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the PTHC-1500 weigh?\u003c\/strong\u003e The Groco PTHC-1500 weighs 0.95 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the PTHC-1500?\u003c\/strong\u003e 6.25 x 6.25 x 6.5 inches are the overall dimensions of the Groco PTHC-1500 fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PTHC-1500 a 90 degree or straight fitting?\u003c\/strong\u003e It is a 90 degree elbow: the Groco PTHC-1500 bends the flow path 90 degrees between its pipe thread end and its hose barb end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does standard flow mean for the PTHC-1500?\u003c\/strong\u003e Standard flow describes the bore sizing of the Groco PTHC-1500, distinguishing it from a full-flow version of the same style of pipe-to-hose adapter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the PTHC-1500 be used with thru-hull fittings?\u003c\/strong\u003e Yes, the Groco PTHC-1500 is commonly used with thru-hull fittings and strainers to transition from rigid pipe thread to flexible hose in onboard plumbing runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the PTHC-1500 include a hose clamp?\u003c\/strong\u003e The dossier for the Groco PTHC-1500 does not list a hose clamp as an included component; the product is the bronze adapter fitting itself.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49031097843931,"sku":"GRO-PTHC-1500","price":34.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61yZYvyEL_L_7cfaf7c3-4ce2-4e8f-ba0f-bd85e31b9d97.jpg?v=1785208688"},{"product_id":"groco-pthc-5062-bronze-90-degree-elbow-1-2-inch-npt-pipe-to-1-2-5-8-inch-id-hose","title":"Groco PTHC-5062 Bronze 90 Degree Elbow, 1\/2 Inch NPT Pipe to 1\/2-5\/8 Inch ID Hose","description":"\u003cp\u003eThe Groco PTHC-5062 is a bronze 90 degree elbow fitting that connects 1\/2 inch NPT pipe threads to hose with an inside diameter of 1\/2 inch to 5\/8 inch. The 90 degree angle allows the fitting to turn a hose run through a tight corner without kinking the hose or adding a separate bend, which is useful in cramped bilge, thru-hull, and plumbing installations where space is limited. The pipe end threads directly into NPT-tapped fittings, valves, seacocks, or strainers, while the barbed hose end accepts hose in the 1\/2 to 5\/8 inch ID range and is secured with a standard hose clamp.\u003c\/p\u003e\u003cp\u003eBronze construction gives the fitting strong corrosion resistance in both saltwater and freshwater marine environments, making it suitable for below-the-waterline plumbing as well as general onboard hose runs. It ships as a single fitting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PTHC-5062\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Thread Size:\u003c\/strong\u003e 1\/2 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size (Inside Diameter):\u003c\/strong\u003e 1\/2 inch to 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.98 x 5 x 4.02 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.23125 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 742985004870\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose fits the Groco PTHC-5062?\u003c\/strong\u003e The Groco PTHC-5062 fits hose with an inside diameter of 1\/2 inch to 5\/8 inch on its barbed end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pipe thread size on this fitting?\u003c\/strong\u003e The pipe end of the PTHC-5062 has 1\/2 inch NPT threads, so it screws directly into standard 1\/2 inch NPT-tapped ports, valves, or strainers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PTHC-5062 a straight fitting or an angled fitting?\u003c\/strong\u003e The PTHC-5062 is a 90 degree elbow, turning the hose run a quarter turn from the pipe connection rather than running straight through.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Groco PTHC-5062 made of?\u003c\/strong\u003e It is made of bronze, which resists corrosion in both saltwater and freshwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fitting be used below the waterline?\u003c\/strong\u003e Yes, the bronze construction of the PTHC-5062 makes it suitable for below-the-waterline plumbing as well as above-deck hose runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come with the PTHC-5062?\u003c\/strong\u003e The Groco PTHC-5062 ships as a single elbow fitting, one piece per order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this elbow fitting?\u003c\/strong\u003e The PTHC-5062 measures 5.98 x 5 x 4.02 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Groco PTHC-5062 weigh?\u003c\/strong\u003e The PTHC-5062 weighs 0.23125 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a hose clamp to install the PTHC-5062?\u003c\/strong\u003e Yes, a standard hose clamp is needed to secure hose onto the barbed hose end of the PTHC-5062; the clamp is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Connector Type flange spec mean for this fitting?\u003c\/strong\u003e The PTHC-5062 is listed with a flange-style connector on the pipe end, which mates with the NPT-threaded port it screws into.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the PTHC-5062 work with rigid PVC pipe as well as hose?\u003c\/strong\u003e The pipe end of the PTHC-5062 uses 1\/2 inch NPT threads, so it will thread into any fitting or port tapped with matching 1\/2 inch NPT threads, while the opposite end is a hose barb for 1\/2 to 5\/8 inch ID hose.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49031097876699,"sku":"GRO-PTHC-5062","price":9.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61Me2JL6GAL.jpg?v=1785208689"},{"product_id":"groco-90-degree-bronze-elbow-fitting-3-4-inch-pipe-to-hose-pthc-750","title":"Groco 90 Degree Bronze Elbow Fitting, 3\/4 Inch Pipe to Hose, PTHC-750","description":"\u003cp\u003eThe Groco PTHC-750 is a 90 degree bronze elbow fitting designed to connect 3\/4 inch pipe thread to 3\/4 inch hose in marine plumbing systems. It is commonly used in thru-hull and strainer installations where a sharp directional change is needed between a threaded pipe fitting and flexible hose, allowing the hose run to turn a corner without kinking or placing strain on the connection. Constructed from bronze, the PTHC-750 resists corrosion in both saltwater and freshwater environments, making it suitable for below-the-waterline plumbing such as raw water intake, cooling, and drainage lines. The 90 degree angle lets installers route hose around tight spaces in an engine compartment or bilge while keeping a rigid, threaded connection on the pipe side. As a simple, single-piece fitting, it requires no assembly and installs with standard pipe fittings and hose clamps. Its compact size and bronze construction make it a durable, long-term component for marine plumbing runs that need a reliable 90 degree pipe-to-hose transition.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PTHC-750\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 90 Degree Elbow, Pipe to Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 90 Degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.29375 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 742985004993\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Groco PTHC-750 connect?\u003c\/strong\u003e The Groco PTHC-750 is a 90 degree elbow that connects 3\/4 inch pipe thread to 3\/4 inch hose, letting a plumbing run change direction between a threaded fitting and flexible hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the PTHC-750 made from?\u003c\/strong\u003e It is made from bronze, which resists corrosion in both saltwater and freshwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does this elbow fit?\u003c\/strong\u003e The PTHC-750 is sized for 3\/4 inch hose on the hose side, paired with a 3\/4 inch pipe thread connection on the other end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle is the Groco PTHC-750 fitting?\u003c\/strong\u003e It is a 90 degree elbow, allowing the hose run to turn a sharp corner from the pipe connection without kinking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the PTHC-750 weigh?\u003c\/strong\u003e The Groco PTHC-750 weighs 0.29375 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PTHC-750 suitable for below-the-waterline use?\u003c\/strong\u003e Yes, its bronze construction makes the PTHC-750 suitable for below-the-waterline marine plumbing such as raw water intake, cooling, and drainage lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need additional hardware to install the PTHC-750?\u003c\/strong\u003e The PTHC-750 is a single-piece bronze elbow that threads onto standard pipe fittings on one end and accepts a hose clamped over the barb on the other end; no special hardware is required beyond a standard hose clamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Groco PTHC-750 genuine Groco or aftermarket?\u003c\/strong\u003e The PTHC-750 is a genuine Groco part, identified by its Groco part number PTHC-750.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the category for the PTHC-750?\u003c\/strong\u003e The PTHC-750 is a thru-hull and strainer fitting used in marine plumbing systems that require a 90 degree pipe-to-hose transition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the PTHC-750 be used in an engine compartment?\u003c\/strong\u003e Yes, the 90 degree angle of the PTHC-750 is useful for routing hose around tight spaces such as engine compartments or bilge areas.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49031097909467,"sku":"GRO-PTHC-750","price":10.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_627c6c87-2865-4c4e-9efc-004a07311402.jpg?v=1785353596"},{"product_id":"groco-bronze-45-degree-3-4-inch-npt-pipe-to-hose-adapter-pthd-750","title":"Groco Bronze 45 Degree 3\/4 Inch NPT Pipe to Hose Adapter PTHD-750","description":"\u003cp\u003eThe Groco PTHD-750 is a bronze 45 degree pipe-to-hose adapter fitting built for marine plumbing and thru-hull applications. It connects a 3\/4 inch NPT threaded pipe fitting to a 3\/4 inch hose barb, allowing a smooth 45 degree transition between rigid pipe and flexible hose without adding a straight coupler and a separate elbow. The bronze construction is suited to below-waterline and other wet marine environments where long-term corrosion resistance matters more than on standard plumbing fittings.\u003c\/p\u003e\u003cp\u003eThis adapter is commonly used with thru-hull fittings, seacocks, strainers, and other below-waterline plumbing where a compact, angled connection point is needed. The barbed hose end is sized for 3\/4 inch marine hose, and the NPT pipe end threads directly into standard 3\/4 inch NPT ports. It ships as a single piece, ready to install with appropriate hose clamps on the barb end.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PTHD-750\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 45 Degree Pipe to Hose Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Connection:\u003c\/strong\u003e 3\/4 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Connection:\u003c\/strong\u003e 3\/4 inch hose barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Barb, Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 4 x 3 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 742985161917\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Groco PTHD-750 connect?\u003c\/strong\u003e The Groco PTHD-750 connects a 3\/4 inch NPT threaded pipe to 3\/4 inch hose at a 45 degree angle, letting one fitting handle both the pipe threads and the hose barb connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PTHD-750 made of bronze or plastic?\u003c\/strong\u003e The PTHD-750 is a bronze fitting, which is the standard material choice for marine thru-hull and below-waterline plumbing connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose fits the barb end of the PTHD-750?\u003c\/strong\u003e The barb end of the Groco PTHD-750 is sized for 3\/4 inch marine hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the thread specs on the pipe end?\u003c\/strong\u003e The pipe end of the PTHD-750 has 3\/4 inch NPT (National Pipe Thread) threads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the angle of this fitting?\u003c\/strong\u003e The PTHD-750 is a 45 degree elbow adapter, transitioning pipe to hose at a 45 degree bend rather than straight or 90 degrees.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the PTHD-750 weigh?\u003c\/strong\u003e The Groco PTHD-750 weighs 0.25625 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the PTHD-750?\u003c\/strong\u003e The PTHD-750 measures 4 x 3 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a hose clamp to install the PTHD-750?\u003c\/strong\u003e Yes, since the PTHD-750 has a barbed hose end, a hose clamp is needed to secure the hose onto the barb; the pipe end simply threads into a 3\/4 inch NPT port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in the package?\u003c\/strong\u003e The Groco PTHD-750 ships as a single piece (quantity of 1).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of applications use the PTHD-750?\u003c\/strong\u003e The PTHD-750 is used in marine plumbing setups such as thru-hull fittings, seacocks, and strainers where a pipe needs to transition to hose at an angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Groco PTHD-750?\u003c\/strong\u003e The UPC for the Groco PTHD-750 is 742985161917.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49031098007771,"sku":"GRO-PTHD-750","price":12.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61FuL2GDvXL_f854b9e9-575f-43a9-aa70-273d5778fd92.jpg?v=1785208692"},{"product_id":"shurflo-183-029-18-pressure-reducing-city-water-entry-fitting-wall-mount-white","title":"Shurflo 183-029-18 Pressure Reducing City Water Entry Fitting, Wall Mount, White","description":"\u003cp\u003eThe Shurflo 183-029-18 is a wall-mount pressure reducing city water entry fitting designed to connect an RV or marine fresh water system to a shore-side or dockside water supply. It steps down incoming municipal water pressure before it reaches the onboard plumbing, helping protect fittings, hoses, and fixtures from pressure spikes common on city water hookups. The housing is molded from durable plastic in a white gel finish, so it blends cleanly with most exterior wall panels and does not require painting or additional finishing.\u003c\/p\u003e\u003cp\u003eConnection is made through a 3\/4 inch GHT (garden hose thread) adapter fitting, the standard thread size used for city water and garden hose connections, making it straightforward to attach a standard water hookup hose. The unit is compact, measuring 4 x 5.25 x 5.75 inches, and mounts directly to an exterior wall for a permanent, flush-style water inlet. At 0.66 pounds, it is lightweight enough for straightforward wall installation without added structural support.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 183-029-18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Pressure Reducing City Water Entry Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Wall Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e White (Gel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4 x 5.25 x 5.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e GHT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.66 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 752324002993\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Shurflo 183-029-18 do?\u003c\/strong\u003e It reduces incoming city or dockside water pressure before that water enters an RV or marine fresh water system, protecting the onboard plumbing from high municipal pressure. It mounts to an exterior wall as a dedicated water entry point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 183-029-18 mount?\u003c\/strong\u003e The 183-029-18 is a wall-mount fitting, installed directly into an exterior wall panel rather than sitting inline on a hose or under a cabinet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does this fitting use?\u003c\/strong\u003e It uses a 3\/4 inch GHT (garden hose thread) connection, the standard thread size for garden hose and city water hookup connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 183-029-18?\u003c\/strong\u003e The unit measures 4 x 5.25 x 5.75 inches as installed on the wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Shurflo 183-029-18 weigh?\u003c\/strong\u003e It weighs 0.66 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 183-029-18 made from?\u003c\/strong\u003e It is molded from plastic with a white gel finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the 183-029-18 come in?\u003c\/strong\u003e It is finished in white, with a gel-coat style white housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the connector on the 183-029-18 an adapter fitting?\u003c\/strong\u003e Yes, the 183-029-18 uses an adapter-type connector at the 3\/4 inch GHT thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 183-029-18 be used on both RVs and boats?\u003c\/strong\u003e Yes, this pressure reducing city water entry fitting is suited to any fresh water system, RV or marine, that connects to a shore or dockside water supply through a wall-mounted inlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 183-029-18 include mounting hardware in the box?\u003c\/strong\u003e The listing covers the pressure reducing city water entry fitting itself; specific included hardware is not detailed beyond the single unit.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49031288226011,"sku":"SHU-183-029-18","price":54.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81dFDGhj_FL.jpg?v=1785212758"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/JON-10615-00__83434.1722503898.500.750.jpg?v=1785356930","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-pumps-plumbing-sanitation-hoses-clamps-fittings.oembed?page=3","provider":"Good Vibes Marina","version":"1.0","type":"link"}