{"title":"Strainers \u0026 Strainer Baskets","description":null,"products":[{"product_id":"sea-dog-517526-1-sink-drain-with-strainer-for-2-openings-5-8-barb-stainless-steel-body","title":"Sea-Dog Sink Drain with Strainer 517526-1, Straight 2 Inch, Stainless Steel Body, 5\/8 Inch Barb","description":"\u003cp\u003eThe Sea-Dog Sink Drain with Strainer (517526-1) is a straight-style drain fitting built for 2 inch sink openings aboard boats, RVs, and other marine applications. It combines a stainless steel body with a zinc cap and nylon fittings, giving it the corrosion resistance needed for galley sinks and other wet environments while keeping the cap durable against repeated use. The drain includes a 5\/8 inch barb on the underside, allowing a length of hose to be pushed on and clamped for a secure connection to a through-hull or drain line.\u003c\/p\u003e\u003cp\u003eThe strainer sits in the drain opening to catch debris before it reaches the plumbing, and the removable design makes it easy to lift out for cleaning. This straight configuration is intended for direct, in-line drainage where the fitting passes straight through the sink base rather than at an angle. It is packaged as a single unit, ready to install in any 2 inch sink cutout without additional adapters.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 517526-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening Size:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Size:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel Body\/Zinc Cap\/Nylon Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.512 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Removable strainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Hole Size:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514517201\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size sink opening does this drain fit?\u003c\/strong\u003e The Sea-Dog 517526-1 sink drain is sized for 2 inch openings, matching the standard cutout used on most boat galley and marine sinks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the barb size on the drain outlet?\u003c\/strong\u003e A 5\/8 inch barb is molded into the underside of the drain, sized to accept 5\/8 inch hose for connecting to a drain line or through-hull fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a straight or angled drain?\u003c\/strong\u003e This is the straight-style version of the Sea-Dog sink drain, part number 517526-1, meaning it passes directly through the sink base rather than at an angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 517526-1 drain made from?\u003c\/strong\u003e It has a stainless steel body, a zinc cap, and nylon fittings, a combination chosen for corrosion resistance in wet marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the strainer be removed for cleaning?\u003c\/strong\u003e Yes, the strainer on the Sea-Dog 517526-1 sink drain is removable, making it easy to clear out debris that collects during use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this sink drain weigh?\u003c\/strong\u003e The Sea-Dog Sink Drain with Strainer (517526-1) weighs 0.512 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many drains come in one package?\u003c\/strong\u003e The 517526-1 sink drain ships as a single unit, with a standard pack of 1 each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this product?\u003c\/strong\u003e The package includes the complete Sea-Dog 517526-1 sink drain assembly: the stainless steel body, zinc cap, nylon fittings, and strainer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this drain fit tanks, baitwells, or ice chests as well as sinks?\u003c\/strong\u003e The Sea-Dog 517526-1 is designed as a sink drain with strainer for 2 inch sink openings; it is not the same product as Sea-Dog's separate nylon drain plugs made for transoms, baitwells, and tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the drain body corrosion resistant?\u003c\/strong\u003e Yes, the body is stainless steel, paired with a zinc cap and nylon fittings, so it resists corrosion in the wet, salt-exposed conditions typical of marine galleys.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this drain?\u003c\/strong\u003e The manufacturer part number is 517526-1, identifying the straight, 2 inch Sea-Dog sink drain with strainer.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988824961243,"sku":"S-D-517526-1","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5228.jpg?v=1784429682"},{"product_id":"perko-0493dp999m-cork-gasket-kit-for-1-1-2-2-and-2-1-2-intake-water-strainers","title":"Perko 0493DP999M Cork Spare Gasket Kit for 1-1\/2, 2 and 2-1\/2 Inch Intake Water Strainers","description":"\u003cp\u003eThe Perko 0493DP999M is a spare gasket kit for Perko intake water strainers, sized to fit 1-1\/2 inch, 2 inch, and 2-1\/2 inch pipe size units. Perko intake strainers protect raw water pumps and engine cooling systems by filtering debris before it enters the intake line, and the strainer housing relies on a proper gasket seal at the cover to keep the system watertight while still allowing the cover to be opened for cleaning. This kit supplies the replacement gasket needed when servicing the strainer or when the original gasket has hardened, cracked, or lost its seal over time.\u003c\/p\u003e\u003cp\u003eThe gasket is made of cork, a traditional sealing material valued for its compressibility and ability to conform to mating surfaces on cast bronze strainer housings. Because the strainer cover is designed for easy removal to access and clean the stainless steel strainer basket, the gasket is a wear item that should be kept on hand or replaced whenever the cover is serviced. This is a gasket kit only and does not include the strainer housing, basket, or cover.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 0493DP999M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cork\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Pipe Sizes:\u003c\/strong\u003e 1-1\/2 inch, 2 inch, 2-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1 kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226338779\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits Perko intake water strainer units in 1-1\/2 inch, 2 inch, and 2-1\/2 inch pipe sizes\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat pipe sizes does the Perko 0493DP999M gasket kit fit?\u003c\/strong\u003e The Perko 0493DP999M gasket kit fits 1-1\/2 inch, 2 inch, and 2-1\/2 inch pipe size intake water strainer units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Perko 0493DP999M gasket made from?\u003c\/strong\u003e It is made of cork, which is chosen for its ability to compress and conform to the cast bronze strainer housing to create a watertight seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 0493DP999M kit include the strainer housing or basket?\u003c\/strong\u003e No. The 0493DP999M is a gasket kit only and does not include the strainer housing, cover, or stainless steel strainer basket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should the strainer gasket be replaced?\u003c\/strong\u003e The gasket should be replaced any time it is removed for cleaning the strainer basket and shows signs of hardening, cracking, or loss of seal, since the cork gasket is a wear item on Perko intake water strainers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko 0493DP999M gasket genuine Perko or aftermarket?\u003c\/strong\u003e The 0493DP999M is a genuine Perko part, manufactured to fit Perko's own line of intake water strainers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets come in the 0493DP999M kit?\u003c\/strong\u003e The kit contains one unit count of the cork gasket for Perko intake water strainers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape is the Perko 0493DP999M gasket?\u003c\/strong\u003e The gasket is round in shape, matching the round cover of the Perko intake water strainer housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Perko 0493DP999M gasket kit weigh?\u003c\/strong\u003e The 0493DP999M gasket kit weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does a Perko intake water strainer need a gasket?\u003c\/strong\u003e The gasket seals the removable cover of the strainer housing, which is designed to be opened for cleaning the stainless steel basket, so a proper seal at the 0493DP999M gasket is needed to keep the system watertight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Perko 0493DP999M gasket kit?\u003c\/strong\u003e The UPC for the Perko 0493DP999M cork gasket kit is 085226338779.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991104073947,"sku":"PKO-0493DP999M","price":40.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Perko-Intake-Water-Strainer-Cork-Gasket-Set__71686.1722379709.500.750.jpg?v=1785188017"},{"product_id":"t-h-marine-thsm-1kit-thru-hull-strainer-mount-as-1-screen-kit-3-4-livewell-baitwell-aerator-fitting-1-3-4-threaded-flush-no-nut-mount","title":"T-H Marine Thru-Hull Strainer Mount Kit with AS-1 Aerator Screen, 1-3\/4 Inch Threaded Length, Fits 3\/4 Inch Hose - THSM-1KIT","description":"\u003cp\u003eThe T-H Marine THSM-1KIT is a thru-hull strainer mount kit that lets you run a 3\/4 inch thru-hull passage through a transom or livewell wall and attach an aerator screen on the opposite side. The kit pairs the T-H Marine fitting mount with the T-H Marine AS-1 aerator screen\/strainer, so everything needed to complete the pass-through is included in one package.\u003c\/p\u003e\u003cp\u003eThe fitting is threaded specifically to fit the AS-1 screen, and its flange design allows the screen to sit flush against the wall with no outside nut needed to secure it. This threaded section measures 1-3\/4 inches with an overall length of 4 inches, and the fitting is sized to fit 3\/4 inch hose. It is well suited for remote-mounted pump setups, whether you are filling from the transom or recirculating water from the livewell.\u003c\/p\u003e\u003cp\u003eThe included AS-1 aerator screen\/strainer is built to fit an aerator pump intake with a 3\/4 inch-14 thread. Together, the mount and screen give you a complete, ready-to-install thru-hull strainer solution without having to source the fitting and screen separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e THSM-1KIT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Thru-hull fitting mount and AS-1 aerator screen\/strainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Section Length:\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Fitment:\u003c\/strong\u003e Fits 3\/4 inch hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAerator Screen Thread:\u003c\/strong\u003e 3\/4 inch-14 thread (fits aerator pump intake)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Connection Size:\u003c\/strong\u003e 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Connection Size:\u003c\/strong\u003e 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Flush flange fit, no outside nut required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572039405\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for transom or livewell wall installations requiring a 3\/4 inch thru-hull passage, including remote-mounted pump setups for filling from the transom or recirculating from the livewell.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this kit.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the T-H Marine THSM-1KIT include?\u003c\/strong\u003e The THSM-1KIT includes a thru-hull fitting mount and a T-H Marine AS-1 aerator screen\/strainer, giving you both pieces needed to complete a 3\/4 inch thru-hull passage in one kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole or hose does this kit fit?\u003c\/strong\u003e This kit is fitted for a 3\/4 inch thru-hull passage and fits 3\/4 inch hose, with the AS-1 screen threaded for a 3\/4 inch-14 aerator pump intake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the threaded section on the THSM-1KIT?\u003c\/strong\u003e The threaded section measures 1-3\/4 inches, with an overall fitting length of 4 inches, on the THSM-1KIT thru-hull strainer mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need an extra nut to secure the fitting?\u003c\/strong\u003e No, the THSM-1KIT flange design allows the fitting to sit flush against the transom or livewell wall without requiring an outside nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this kit typically installed?\u003c\/strong\u003e It is installed through a transom or livewell wall to create a thru-hull passage, commonly used for remote-mounted pumps that fill from the transom or recirculate water from the livewell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the aerator screen included, or sold separately?\u003c\/strong\u003e The AS-1 aerator screen\/strainer is included as part of the THSM-1KIT, so you do not need to purchase it separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the THSM-1KIT?\u003c\/strong\u003e The THSM-1KIT weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a version with a longer threaded section for thicker mounting surfaces?\u003c\/strong\u003e Yes, T-H Marine's THSM-1XL kit uses a longer 3 inch threaded section for thicker surface installations, compared to the 1-3\/4 inch threaded section on the THSM-1KIT.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread does the aerator screen use to fit the pump intake?\u003c\/strong\u003e The AS-1 aerator screen included in the THSM-1KIT uses a 3\/4 inch-14 thread to fit the aerator pump intake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the THSM-1KIT?\u003c\/strong\u003e The UPC for the T-H Marine THSM-1KIT is 733572039405.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991272763611,"sku":"T-H-THSM-1KIT-DP","price":14.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/mount-screen-1-3-4-threaded-length-black-thsm-1kit-dp-thru-hull-strainer-mount-28009713860651.jpg?v=1784499063"},{"product_id":"groco-sc-1500-l-bronze-shell-hull-strainer-for-up-to-1-1-2-inch-thru-hull","title":"Groco SC-1500-L Bronze Shell Hull Strainer for Up to 1-1\/2 Inch Thru Hull","description":"\u003cp\u003eThe Groco SC-1500-L is a bronze shell hull strainer designed to protect a boat's raw water intake system from debris before it reaches the pump. Mounted on the outside of the hull over the thru hull fitting, it filters incoming water at the source, reducing the load on any inline strainer and helping prevent clogs in engine cooling, air conditioning, or washdown systems.\u003c\/p\u003e\u003cp\u003eThe strainer body and door are both constructed of bronze for corrosion resistance in saltwater and freshwater marine environments. The door features caster filter slots that strain out weeds, debris, and marine growth, along with pressure relief holes built into the door casing to help equalize pressure during removal or servicing. The SC-1500-L is sized for thru hull fittings up to 1-1\/2 inches and is sold without a mount ring, so buyers who need one should plan to purchase it separately.\u003c\/p\u003e\u003cp\u003eThis shell strainer is a straightforward, serviceable component: the bronze door can be removed for cleaning without disturbing the seacock or hull fitting itself, making routine maintenance simple for boat owners who service their own raw water systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SC-1500-L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Shell Hull Strainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody and Door Construction:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThru Hull Compatibility:\u003c\/strong\u003e Up to 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Ring Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e Caster filter slots, pressure relief holes in door casing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 742985122666\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Groco SC-1500-L used for?\u003c\/strong\u003e The Groco SC-1500-L is a shell hull strainer that mounts over a boat's thru hull fitting to filter debris out of raw water before it enters the intake system, protecting pumps and cooling systems from weeds and marine growth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thru hull size does the SC-1500-L fit?\u003c\/strong\u003e The SC-1500-L is designed for thru hull fittings up to 1-1\/2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Groco SC-1500-L made of bronze?\u003c\/strong\u003e Yes, both the body and the door of the SC-1500-L are constructed of bronze for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SC-1500-L come with a mount ring?\u003c\/strong\u003e No, the Groco SC-1500-L does not include a mount ring, so one must be purchased separately if needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Groco SC-1500-L weigh?\u003c\/strong\u003e The SC-1500-L weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the door of the SC-1500-L strain out debris?\u003c\/strong\u003e The door casing has caster filter slots that catch weeds and debris, along with pressure relief holes to help equalize pressure when the door is removed or serviced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the SC-1500-L be cleaned or serviced?\u003c\/strong\u003e Yes, the bronze door on the SC-1500-L can be removed for cleaning debris out of the strainer without disturbing the underlying thru hull or seacock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Groco SC-1500-L?\u003c\/strong\u003e The UPC for the Groco SC-1500-L Shell Hull Strainer is 742985122666.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the SC-1500-L installed on a boat?\u003c\/strong\u003e The SC-1500-L mounts on the exterior of the hull, over the thru hull fitting, to filter raw water at the intake source before it reaches onboard systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Groco SC-1500-L a genuine Groco part?\u003c\/strong\u003e Yes, the SC-1500-L is a genuine Groco Shell Hull Strainer, part number SC-1500-L.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49027994386651,"sku":"GRO-SC-1500-L","price":43.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SC1500-L__98485.1739463013.500.750.jpg?v=1785164378"},{"product_id":"johnson-pump-universal-strainer-09-24652-02-cn-40-mesh-water-pressure-system-filter-with-clear-acrylic-cover","title":"Johnson Pump Universal Strainer 09-24652-02-CN, 40 Mesh Water Pressure System Filter with Clear Acrylic Cover","description":"\u003cp\u003eThe Johnson Pump Universal Strainer, part number 09-24652-02-CN, protects a water pressure pump from debris by mounting inline between the water tank and the pump. It is built for use in any pump system of a relevant flow size, making it a flexible choice wherever pre-pump filtration is needed. The strainer housing uses Polyamide 66 with a clear acrylic cover (part number 09-36012), so the internal screen can be visually inspected for buildup without disassembling the unit. Inside, a stainless steel screen is available in both 20 and 40 mesh, with silicone and EPDM O-rings sealing the housing.\u003c\/p\u003e\u003cp\u003eConnections are made through built-in KlickTite port connectors, supplied in two sizes: 2 x 1\/2 inch hose \/ 3\/8 inch BSP (NPT) and 2 x 3\/4 inch hose \/ 1\/2 inch BSP (NPT), allowing straightforward installation into varying hose and fitting setups. The entire strainer unit can be removed from its mounting for cleaning, and the strainer itself is easy to disassemble once removed, simplifying routine maintenance. The unit is rated for a maximum liquid temperature of 120 degrees Fahrenheit, and up to 85 degrees Fahrenheit when used for drinking water applications. Its compact 3.15 inch diameter and 2.35 inch height make it suitable for mounting in tight spaces near a water tank or pump.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Johnson Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 09-24652-02-CN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh Size:\u003c\/strong\u003e 40 mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrainer Material:\u003c\/strong\u003e Polyamide 66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrainer Cover Material:\u003c\/strong\u003e Clear acrylic (Part # 09-36012)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen:\u003c\/strong\u003e 20 and 40 mesh stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-Ring Material:\u003c\/strong\u003e Silicone and EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Liquid Temperature:\u003c\/strong\u003e 120 degrees Fahrenheit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Temperature for Drinking Water:\u003c\/strong\u003e 85 degrees Fahrenheit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Connectors:\u003c\/strong\u003e Built-in KlickTite, 2 x 1\/2 inch hose \/ 3\/8 inch BSP (NPT), 2 x 3\/4 inch hose \/ 1\/2 inch BSP (NPT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3.15 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2.35 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725321652025\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Johnson Pump Universal Strainer 09-24652-02-CN do?\u003c\/strong\u003e It mounts inline between a water tank and a pump to catch debris before it reaches the pump, protecting the pump in a water pressure system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 09-24652-02-CN strainer be used with any pump system?\u003c\/strong\u003e Yes, the Johnson Pump Universal Strainer is designed to work in any pump system of a relevant flow size, not just one specific pump model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mesh size of this strainer?\u003c\/strong\u003e The screen is available in both 20 and 40 mesh stainless steel inside the 09-24652-02-CN strainer housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the strainer housing made from?\u003c\/strong\u003e The housing of the Johnson Pump 09-24652-02-CN is Polyamide 66, paired with a clear acrylic cover for visual inspection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I clean the strainer?\u003c\/strong\u003e The entire 09-24652-02-CN unit can be removed from its mounting, and the strainer itself is easy to disassemble once removed, allowing the screen to be rinsed clean.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose connections does this strainer use?\u003c\/strong\u003e It has built-in KlickTite port connectors in two sizes: 2 x 1\/2 inch hose \/ 3\/8 inch BSP (NPT) and 2 x 3\/4 inch hose \/ 1\/2 inch BSP (NPT).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the strainer cover replaceable?\u003c\/strong\u003e Yes, the clear acrylic cover on the Johnson Pump 09-24652-02-CN is a separate part, number 09-36012, if it ever needs to be replaced on its own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum operating temperature for this strainer?\u003c\/strong\u003e The 09-24652-02-CN is rated for a maximum liquid temperature of 120 degrees Fahrenheit, and up to 85 degrees Fahrenheit for drinking water use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Johnson Pump Universal Strainer?\u003c\/strong\u003e It measures 3.15 inches in diameter and 2.35 inches in height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this strainer weigh?\u003c\/strong\u003e The Johnson Pump 09-24652-02-CN Universal Strainer weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the O-rings made of on this strainer?\u003c\/strong\u003e Silicone and EPDM O-rings are used to seal the housing on the 09-24652-02-CN Universal Strainer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I see the debris inside the strainer without opening it?\u003c\/strong\u003e Yes, the clear acrylic cover on the Johnson Pump 09-24652-02-CN allows the screen to be inspected visually without disassembling the unit.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":49028225368283,"sku":"JON-09-24652-02-CN","price":23.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/JON-09-24652-02-CN__96319.1722347718.500.750.jpg?v=1785164627"},{"product_id":"johnson-pump-09-24653-02-cn-inlet-strainer-40-mesh-for-aqua-jet-series-water-pumps","title":"Johnson Pump 09-24653-02-CN Inlet Strainer, 40 Mesh, for Aqua Jet Series Water Pumps","description":"\u003cp\u003eThe Johnson Pump 09-24653-02-CN Inlet Strainer protects a water pressure system pump from debris by filtering water before it reaches the inlet side of the pump. It is designed for use at the inlet side of a pump in the water pressure system and washdown pumps in the SPX Johnson Pump Aqua Jet series, and it can be used in any pump system of the relevant flow size. The strainer mounts between the water tank and the pump and is easy to disassemble for cleaning.\u003c\/p\u003e\u003cp\u003eThe body is molded from Polyamide 66 with a 40 mesh stainless steel screen that captures particulate before it can foul or damage the pump. A clear acrylic cover allows the screen to be inspected visually without removing the unit, and the entire strainer lifts out as a single assembly for thorough cleaning. Built-in KlickTite port connectors let the strainer be disconnected and drained quickly during winterizing, without special tools, and the silicone and EPDM O-rings seal the housing for reliable operation up to a maximum liquid temperature of 120 degrees F (85 degrees F maximum for drinking water use). The strainer connects with 1 x 1\/2 inch hose \/ 3\/8 inch BSP (NPT) and 1 x 3\/4 inch hose \/ 1\/2 inch BSP (NPT) KlickTite fittings.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Johnson Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 09-24653-02-CN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh:\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrainer Material:\u003c\/strong\u003e Polyamide 66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrainer Cover:\u003c\/strong\u003e Clear Acrylic (Part # 09-36012)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-Rings:\u003c\/strong\u003e Silicone and EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Liquid Temperature:\u003c\/strong\u003e 120 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Temperature for Drinking Water:\u003c\/strong\u003e 85 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKlickTite Connector:\u003c\/strong\u003e Built-in, 1 x 1\/2 inch hose \/ 3\/8 inch BSP (NPT), 1 x 3\/4 inch hose \/ 1\/2 inch BSP (NPT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3.15 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2.35 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Transparent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 729321246538\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInlet side of a pump in a water pressure system\u003c\/li\u003e\n\u003cli\u003eSPX Johnson Pump Aqua Jet series and washdown pumps\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo verified OEM cross-reference numbers are listed for this part number.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Johnson Pump 09-24653-02-CN Inlet Strainer used for?\u003c\/strong\u003e It protects a water pressure system pump from debris by filtering water at the pump inlet before it enters the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich pump systems is this strainer compatible with?\u003c\/strong\u003e The 09-24653-02-CN is designed for use at the inlet side of a pump in a water pressure system and is used on pumps in the SPX Johnson Pump Aqua Jet series and washdown pumps; it can be used in any pump system of the relevant flow size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mesh screen does this strainer use?\u003c\/strong\u003e The 09-24653-02-CN uses a 40 mesh stainless steel screen to filter debris from the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the strainer body made of?\u003c\/strong\u003e The strainer body is molded from Polyamide 66, with a clear acrylic cover and a stainless steel mesh screen.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I see inside the strainer without taking it apart?\u003c\/strong\u003e Yes, the 09-24653-02-CN has a clear acrylic cover that allows the screen to be visually inspected without disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I clean the Johnson Pump inlet strainer?\u003c\/strong\u003e The entire strainer unit can be removed from the line for cleaning, and built-in KlickTite port connectors allow it to be disconnected without special tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose and thread sizes does this strainer connect to?\u003c\/strong\u003e The 09-24653-02-CN has one KlickTite connection for 1\/2 inch hose \/ 3\/8 inch BSP (NPT) and one for 3\/4 inch hose \/ 1\/2 inch BSP (NPT).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this strainer?\u003c\/strong\u003e The 09-24653-02-CN measures 3.15 inches in diameter and 2.35 inches in height, and weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum operating temperature for this strainer?\u003c\/strong\u003e The maximum liquid temperature is 120 degrees F, with a maximum of 85 degrees F when used for drinking water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the acrylic cover on this strainer replaceable?\u003c\/strong\u003e Yes, the clear acrylic cover on the 09-24653-02-CN is available separately as Part # 09-36012.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is different about this strainer compared to the Johnson Pump Universal Strainer?\u003c\/strong\u003e The 09-24653-02-CN Inlet Strainer has a single KlickTite port connection on each side for inlet-side use, while the Johnson Pump Universal Strainer is built with two port connectors per side for broader plumbing configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the strainer include O-rings for sealing?\u003c\/strong\u003e Yes, the 09-24653-02-CN includes silicone and EPDM O-rings to seal the housing.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":49028225401051,"sku":"JON-09-24653-02-CN","price":30.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/JON-09-24653-02-CN__44777.1722517208.500.750.jpg?v=1785164627"},{"product_id":"johnson-pump-09-36012-aqua-jet-clear-inlet-strainer-cover-for-washdown-pumps","title":"Johnson Pump 09-36012 Aqua Jet Clear Inlet Strainer Cover for Washdown Pumps","description":"\u003cp\u003eThe Johnson Pump 09-36012 is a clear inlet strainer cover designed for use with the Johnson Pump Aqua Jet Water System and washdown pumps. Its transparent plastic construction lets you check the condition of the strainer screen at a glance, so you can spot debris buildup and know when it is time to clean the strainer without having to disassemble the housing every time. As a universal cover, it is built to fit strainer housings used across the Aqua Jet and washdown pump lineup, making it a straightforward replacement part when an existing cover has cracked, clouded over, or gone missing. The compact, lightweight design keeps the footprint small so it drops into the same mounting space as the original cover. Because it is a genuine Johnson Pump part carrying the 09-36012 part number, it is manufactured to match the fit and seal of the covers originally supplied with Aqua Jet water pressure systems and washdown pump strainers, giving boat owners and RV owners a reliable way to keep their onboard water strainer visible and serviceable.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Johnson Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 09-36012\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Inlet Strainer Cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Aqua Jet Water System and washdown pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5 inches L x 3 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7330717011130\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Johnson Pump 09-36012 fit?\u003c\/strong\u003e The Johnson Pump 09-36012 is designed for use with the Johnson Pump Aqua Jet Water System and washdown pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 09-36012 strainer cover clear?\u003c\/strong\u003e Yes, the Johnson Pump 09-36012 Aqua Jet Inlet Strainer Cover is made of clear plastic so you can visually check the strainer screen for debris without removing the cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 09-36012 cover made from?\u003c\/strong\u003e It is made of plastic, per the manufacturer specifications for Johnson Pump part number 09-36012.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this strainer cover?\u003c\/strong\u003e The Johnson Pump 09-36012 measures 5 inches long by 3 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Johnson Pump 09-36012 weigh?\u003c\/strong\u003e This strainer cover weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a universal-fit cover?\u003c\/strong\u003e Yes, the 09-36012 is a universal clear inlet strainer cover built to fit Johnson Pump Aqua Jet Water System and washdown pump strainer housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I inspect the strainer without taking the cover off?\u003c\/strong\u003e Because the Johnson Pump 09-36012 cover is clear, you can see the condition of the strainer screen and check for debris buildup without removing the cover from the housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 09-36012 a genuine Johnson Pump part?\u003c\/strong\u003e Yes, part number 09-36012 is the genuine Johnson Pump inlet strainer cover made for the Aqua Jet Water System and washdown pumps, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Johnson Pump strainer cover?\u003c\/strong\u003e The UPC for the Johnson Pump 09-36012 Aqua Jet Inlet Strainer Cover is 7330717011130.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cover replace a cracked or cloudy strainer cover on my washdown pump?\u003c\/strong\u003e The Johnson Pump 09-36012 is intended as a replacement cover for strainer housings on Aqua Jet Water Systems and washdown pumps that use this clear cover design.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":49028225433819,"sku":"JON-09-36012","price":9.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/JON-09-36012__67160.1722491680.500.750.jpg?v=1785164627"},{"product_id":"shurflo-swivel-nut-fresh-water-strainer-1-2-inch-pipe-inlet-clear-bowl-part-255-315","title":"Shurflo Swivel Nut Fresh Water Strainer, 1\/2 Inch Pipe Inlet, Clear Bowl, Part 255-315","description":"\u003cp\u003eThe Shurflo Swivel Nut Fresh Water Strainer is a clear, twist-on inline strainer built to protect a fresh water demand pump from debris and particles that cause premature wear and unnecessary repairs. It features a 1\/2 inch pipe inlet and screws directly onto the pump head using its swivel nut fitting, making installation straightforward without special tools. The clear, clean plastic bowl construction lets you see at a glance when the strainer needs cleaning, so maintenance is visual rather than guesswork.\u003c\/p\u003e\u003cp\u003eInside the bowl sits a 50 mesh stainless steel screen that catches sediment, sand, and other debris before it reaches the pump inlet, helping extend pump life and maintain consistent water flow. The strainer disassembles easily for cleaning and reassembles just as quickly, so routine upkeep takes only a few minutes. Its compact, lightweight design makes it suitable for tight installation spaces found in marine and RV fresh water systems.\u003c\/p\u003e\u003cp\u003eThis strainer is compatible with Shurflo demand pumps that use a 1\/2 inch pipe (MPT) inlet connection. It is sold as a standalone strainer for use ahead of the pump inlet in a fresh water plumbing line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 255-315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Swivel Nut Fresh Water Strainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Connection:\u003c\/strong\u003e 1\/2 inch pipe inlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen Mesh:\u003c\/strong\u003e 50 mesh stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Clear plastic bowl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 6.25 inches L x 4.75 inches W x 2.5 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.19375 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 752324010264\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Fresh water demand pump filtration for marine and RV use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Shurflo 255-315 strainer connect to?\u003c\/strong\u003e The Shurflo 255-315 has a 1\/2 inch pipe inlet and uses a swivel nut fitting that screws directly onto the pump head, so it installs inline just ahead of the pump inlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size screen mesh does this strainer use?\u003c\/strong\u003e It uses a 50 mesh stainless steel screen, fine enough to catch sediment and debris before it reaches the pump while still allowing normal water flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the bowl on the 255-315 strainer clear?\u003c\/strong\u003e Yes, the bowl is made of clear, clean plastic so you can visually check when it is time to clean out the accumulated debris without disassembling it first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I clean the Shurflo swivel nut strainer?\u003c\/strong\u003e Twist the clear bowl off the strainer body, remove and rinse the 50 mesh stainless steel screen, then reassemble; the 255-315 is designed for easy disassembly and reassembly for routine cleaning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat pumps is the 255-315 strainer compatible with?\u003c\/strong\u003e This strainer is designed for Shurflo demand pumps that use a 1\/2 inch pipe (MPT) inlet connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Shurflo 255-315 strainer made of?\u003c\/strong\u003e The strainer body and bowl are made of clear plastic, paired with a 50 mesh stainless steel screen insert.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this strainer?\u003c\/strong\u003e The Shurflo 255-315 measures 6.25 inches long by 4.75 inches wide by 2.5 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Shurflo swivel nut strainer weigh?\u003c\/strong\u003e It weighs 0.19375 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the strainer come with mounting hardware or fittings?\u003c\/strong\u003e The 255-315 is a self-contained twist-on unit with a swivel nut fitting; it screws directly onto the pump head inlet without separate mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does my Shurflo pump need an inline strainer like the 255-315?\u003c\/strong\u003e An inline strainer such as the 255-315 keeps debris and particles out of the pump inlet, which reduces wear and helps prevent repairs caused by contaminated fresh water lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 255-315 strainer genuine Shurflo or aftermarket?\u003c\/strong\u003e The 255-315 is a genuine Shurflo swivel nut fresh water strainer, not a generic aftermarket substitute.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49029558829275,"sku":"SHU-255-315","price":16.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/255-315_1__56075.1722498678.500.750.jpg?v=1785165652"},{"product_id":"shurflo-twist-on-strainer-1-2-inch-pipe-inlet-50-mesh-stainless-steel-screen-255-313","title":"Shurflo Twist-On Strainer, 1\/2 Inch Pipe Inlet, 50 Mesh Stainless Steel Screen (255-313)","description":"\u003cp\u003eThe Shurflo Twist-On Strainer (255-313) is a 1\/2 inch pipe-inlet water strainer that screws directly onto the pumphead to keep debris and particles out of freshwater pump systems. Its clear, transparent housing lets you see at a glance when the bowl needs cleaning, so maintenance happens before the pump is starved or clogged rather than after a failure. Inside, a 50 mesh stainless steel screen catches sediment and small particulate while allowing water to flow freely to the pump.\u003c\/p\u003e\u003cp\u003eThe strainer is built from durable plastic housing components with a stainless steel exterior finish on the screen assembly, and it uses NPSM threads to mate with the pumphead. It disassembles easily for cleaning and reassembles just as quickly, so routine upkeep does not require tools or downtime. This is a compact, economical way to extend the service life of a freshwater pump by stopping debris before it reaches the impeller or valves.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 255-313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Twist-On Water Strainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Size:\u003c\/strong\u003e 1\/2 inch Pipe Inlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen:\u003c\/strong\u003e 50 Mesh Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPSM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2.25 x 4.75 x 6.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 752324009329\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the port size on the Shurflo 255-313 strainer?\u003c\/strong\u003e The Shurflo 255-313 Twist-On Strainer has a 1\/2 inch pipe inlet that screws directly onto the pumphead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mesh size is the screen?\u003c\/strong\u003e It uses a 50 mesh stainless steel screen, fine enough to catch sediment and debris before it reaches the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the strainer bowl transparent?\u003c\/strong\u003e Yes, the 255-313 has a clear, transparent housing so you can see when debris has built up and it is time to clean the bowl.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Shurflo 255-313 strainer weigh?\u003c\/strong\u003e The Shurflo 255-313 Twist-On Strainer weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the strainer housing made of?\u003c\/strong\u003e The housing on the 255-313 strainer is plastic, with a stainless steel screen for filtration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I clean the Shurflo 255-313 strainer?\u003c\/strong\u003e The strainer disassembles easily by twisting off the bowl, letting you remove and rinse the 50 mesh stainless steel screen before reassembling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type does this strainer use?\u003c\/strong\u003e The 255-313 strainer uses NPSM threads to connect to the pumphead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 255-313 strainer?\u003c\/strong\u003e The Shurflo 255-313 measures 2.25 x 4.75 x 6.25 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this strainer need a barb fitting instead of pipe threads?\u003c\/strong\u003e No, the 255-313 is the pipe-inlet version with a 1\/2 inch pipe connection; Shurflo also makes a separate barb-inlet version (255-323) as a different part number for barb fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the purpose of a strainer like the Shurflo 255-313?\u003c\/strong\u003e It filters debris and particles out of the water line before it reaches a freshwater pump, reducing wear and preventing clogs that can cause pump failure.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49029558894811,"sku":"SHU-255-313","price":12.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/shu-255-313_lg__77976.1558174849.500.750.jpg?v=1785165652"},{"product_id":"shurflo-fresh-water-swivel-nut-strainer-1-2-inch-barb-inlet-part-255-325","title":"Shurflo Fresh Water Swivel Nut Strainer 1\/2 Inch Barb Inlet, Part 255-325","description":"\u003cp\u003eThe Shurflo Fresh Water Swivel Nut Strainer (part 255-325) is a 1\/2 inch barb inlet strainer that protects freshwater pump systems by keeping debris and particles out of the pump. It is built for industrial and marine use and is CE listed. The strainer screws directly onto the pump head, and its swivel nut design lets you rotate and orient the outlet hose before tightening, which makes alignment and installation easier than a fixed twist-on strainer.\u003c\/p\u003e\u003cp\u003eInside the clear plastic housing is a 50 mesh stainless steel screen that catches sediment and debris before it can reach and damage the pump. The transparent bowl construction means you can see at a glance when the screen needs cleaning, without having to disassemble the unit to check. When cleaning is needed, the strainer disassembles easily for cleaning and reassembles just as easily, so maintenance takes only a few minutes.\u003c\/p\u003e\u003cp\u003eThe inlet port is a 1\/2 inch barb straight fitting, and the outlet port is a 1\/2 inch NPT connection secured with a hex wing nut for tool-free tightening. The unit is rated to a maximum temperature of 120 degrees Fahrenheit, making it suitable for typical RV and marine freshwater pump plumbing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 255-325\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Port:\u003c\/strong\u003e 1\/2 inch Barb Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Port:\u003c\/strong\u003e 1\/2 inch NPT, Hex Wing Nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Temperature:\u003c\/strong\u003e 120 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen:\u003c\/strong\u003e 50 Mesh Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 4.75 inches W x 2.25 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 752324010271\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size fittings does the Shurflo 255-325 strainer use?\u003c\/strong\u003e The Shurflo 255-325 has a 1\/2 inch barb straight inlet port and a 1\/2 inch NPT outlet port secured with a hex wing nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the swivel nut design let me do?\u003c\/strong\u003e The swivel nut on the 255-325 lets you rotate and orient the outlet hose before tightening it down, so you can line up the plumbing without twisting the hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mesh size is the screen?\u003c\/strong\u003e A 50 mesh stainless steel screen is used to catch sediment and debris before it reaches the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know when the strainer needs cleaning?\u003c\/strong\u003e The housing is clear plastic, so you can see the screen and bowl directly and tell at a glance when debris has built up and cleaning is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this strainer easy to clean?\u003c\/strong\u003e Yes, the 255-325 disassembles easily for cleaning and reassembles just as easily, so maintenance does not require special tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum operating temperature?\u003c\/strong\u003e The Shurflo 255-325 is rated to a maximum temperature of 120 degrees Fahrenheit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the strainer housing made from?\u003c\/strong\u003e The 255-325 strainer housing is made of clear plastic construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the strainer?\u003c\/strong\u003e The Shurflo 255-325 measures 4.75 inches wide by 2.25 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the strainer weigh?\u003c\/strong\u003e The Shurflo 255-325 weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this strainer suitable for marine use?\u003c\/strong\u003e Yes, the 255-325 is built for industrial and marine use and is CE listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does this strainer install?\u003c\/strong\u003e It screws directly onto the pump head at the inlet, ahead of the pump, to filter incoming water before it reaches the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from a standard twist-on strainer?\u003c\/strong\u003e Unlike a fixed twist-on strainer, the 255-325 uses a swivel nut on the outlet, allowing you to orient the connected hose after the strainer body is tightened in place.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49029558862043,"sku":"SHU-255-325","price":15.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/255-325__01498.1722362853.500.750.jpg?v=1785165652"},{"product_id":"shurflo-twist-on-water-strainer-1-2-inch-barb-inlet-clear-bowl","title":"Shurflo Twist-On Water Strainer - 1\/2 Inch Barb Inlet, Clear Bowl","description":"\u003cp\u003eThe Shurflo Twist-On Water Strainer protects a fresh water pump from debris and particles that can cause premature wear or clogging. It installs by twisting directly onto the pump head, with a 1\/2 inch barb inlet connection that requires no separate swivel nut. Inside the clear plastic housing sits a 50 mesh stainless steel screen that catches sediment before it reaches the pump, while the transparent bowl lets you see at a glance when it is time to clean.\u003c\/p\u003e\u003cp\u003eConstruction is clean, clear plastic that is easy to disassemble, rinse out, and reassemble, so routine maintenance takes only a moment. Because the strainer mounts right at the pump head, it is a straightforward way to reduce unnecessary repairs on a fresh water system. The combination of a fine stainless mesh screen and a see-through bowl makes this strainer well suited for boat owners who want a simple, visual way to keep their pump's water supply clean.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 255-323\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Twist-On Water Strainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Connection:\u003c\/strong\u003e 1\/2 inch Barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen:\u003c\/strong\u003e 50 Mesh Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBowl Construction:\u003c\/strong\u003e Clear Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e 1202.1010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.19 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 752324009336\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size inlet does the Shurflo Twist-On Water Strainer use?\u003c\/strong\u003e It has a 1\/2 inch barb inlet that connects directly to a pump head fitting, no separate nut required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this strainer attach to the pump?\u003c\/strong\u003e The Shurflo Twist-On Water Strainer (part number 255-323) screws directly onto the pumphead by twisting it on over the barb inlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mesh size is the screen inside the strainer?\u003c\/strong\u003e A 50 mesh stainless steel screen is fitted inside, fine enough to catch debris and particles before they reach the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I see when the strainer needs cleaning?\u003c\/strong\u003e Yes, the bowl is made of clear, transparent plastic so you can see collected debris and know when it is time to clean it out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the strainer housing made of?\u003c\/strong\u003e The Shurflo Twist-On Water Strainer is made of clean, clear plastic construction for both the bowl and body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this strainer easy to clean?\u003c\/strong\u003e Yes, it is designed for easy disassembly, cleaning, and reassembly, so removing trapped debris takes only a few minutes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Shurflo 255-323 strainer weigh?\u003c\/strong\u003e It weighs 0.19 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this strainer and a swivel nut strainer?\u003c\/strong\u003e This is a twist-on style that screws straight onto the pump head barb, rather than a swivel nut design that uses a separate hex wing nut to secure the connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the model number for this Shurflo strainer?\u003c\/strong\u003e Its model number is 1202.1010, with manufacturer part number 255-323.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this strainer fit any fresh water pump?\u003c\/strong\u003e The Shurflo Twist-On Water Strainer is designed to screw onto a pump head with a 1\/2 inch barb fitting, keeping debris out of the pump on fresh water systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Shurflo Twist-On Water Strainer?\u003c\/strong\u003e The UPC for this strainer, part number 255-323, is 752324009336.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49029558927579,"sku":"SHU-255-323","price":12.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/shu-255-323_lg__50563.1558174885.500.750.jpg?v=1785165652"},{"product_id":"groco-arg-1210-s-intake-strainer-1-1-4-inch-npt-bronze-body-with-stainless-steel-basket","title":"Groco ARG-1210-S Intake Strainer, 1-1\/4 Inch NPT Bronze Body with Stainless Steel Basket","description":"\u003cp\u003eThe Groco ARG-1210-S is a 1-1\/4 inch NPT intake strainer built with a bronze body and a stainless steel filter basket, designed to protect a boat's raw water intake from debris while resisting the corrosive effects of saltwater. The strainer features a non-metallic magnifying cap that will not corrode or bind over time, letting you visually inspect the basket for buildup without disassembling the unit. O-rings seal all joining surfaces, and all ports are NPT threaded for a secure, leak-resistant connection into the intake line.\u003c\/p\u003e\u003cp\u003eThe improved basket design is built to handle saltwater environments and larger debris such as rocks, while an improved handle makes basket removal easier during cleaning. An improved drain plug allows the strainer to be drained without removing the entire basket assembly. The design eliminates the need for tie rods or gaskets found on older strainer designs, simplifying long-term maintenance. Service is done through the screw-on cap, and bonding connections are provided on both sides of the housing for proper electrical bonding. Mounting hardware is included, making the ARG-1210-S ready to install on a raw water intake system without sourcing separate fasteners.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ARG-1210-S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Size:\u003c\/strong\u003e 1-1\/4 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasket Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Material:\u003c\/strong\u003e Non-metallic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.65 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Thru Hull Fittings \u0026amp; Strainers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 742985137158\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding Connections:\u003c\/strong\u003e Both sides\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing:\u003c\/strong\u003e O-ring sealed joining surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the ports on the Groco ARG-1210-S intake strainer?\u003c\/strong\u003e The ARG-1210-S has 1-1\/4 inch NPT threaded ports on all connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the filter basket made of?\u003c\/strong\u003e The ARG-1210-S uses a stainless steel filter basket designed to handle saltwater and larger debris such as rocks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with the ARG-1210-S?\u003c\/strong\u003e Yes, mounting hardware is included with the Groco ARG-1210-S intake strainer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the strainer cap made of?\u003c\/strong\u003e The ARG-1210-S has a non-metallic magnifying cap that will not corrode or bind, allowing easy visual inspection of the basket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the ARG-1210-S suitable for saltwater use?\u003c\/strong\u003e Yes, the improved basket on the ARG-1210-S is designed for saltwater environments and larger debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you clean or service the ARG-1210-S strainer?\u003c\/strong\u003e The Groco ARG-1210-S is serviced through its screw-on cap, with no tie rods or gaskets required for basket removal and cleaning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the ARG-1210-S weigh?\u003c\/strong\u003e The Groco ARG-1210-S weighs 6.65 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ARG-1210-S have bonding connections?\u003c\/strong\u003e Yes, the ARG-1210-S includes bonding connections on both sides of the housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the body material of the ARG-1210-S?\u003c\/strong\u003e The ARG-1210-S intake strainer has a bronze body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ARG-1210-S use tie rods or gaskets?\u003c\/strong\u003e No, the ARG-1210-S design eliminates tie rods and gaskets, simplifying maintenance compared to older strainer designs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the joining surfaces sealed on the ARG-1210-S?\u003c\/strong\u003e O-rings seal all joining surfaces on the Groco ARG-1210-S intake strainer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the ARG-1210-S be drained without removing the basket?\u003c\/strong\u003e Yes, the ARG-1210-S includes an improved drain plug that allows draining without removing the entire basket assembly.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49031096041691,"sku":"GRO-ARG-1210S","price":326.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31lFQ7Mq53L.jpg?v=1785208656"},{"product_id":"t-h-marine-as-1-aerator-screen-strainer-3-4-14-thread-aerator-pump-intake-fitting","title":"T-H Marine AS-1 Aerator Screen\/Strainer - 3\/4\"-14 Thread Aerator Pump Intake Fitting","description":"\u003cp\u003eThe T-H Marine AS-1 is a screw-on aerator screen\/strainer built to protect aerator pump intakes from fish scales, sludge, and other debris that can clog a livewell or baitwell system. It threads directly onto a 3\/4\"-14 aerator pump intake and is also the matched strainer for T-H Marine's THSM-1 and THSM-1XL thru-hull strainer mount fittings, which pass a 3\/4\" thru-hull passage through a transom or livewell wall. Because the AS-1 is threaded to fit the THSM-1\/THSM-1XL mount, it seats flush against the wall on the intake side with no extra nut needed to secure it, giving a clean, low-profile installation whether the pump draws water through the transom or recirculates from the livewell.\u003c\/p\u003e\u003cp\u003eConstructed from stainless steel wire mesh, the AS-1 is built to resist corrosion in continuous freshwater and saltwater service while keeping the pump's intake path clear. Installation is a simple screw-on operation with no special tools required, making it an easy upgrade or replacement part for anyone maintaining a livewell, baitwell, or washdown aeration setup. It is compatible with 3\/4\" hose connections, matching the thread and hose sizing used on the THSM-1 family of fittings.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AS-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Aerator Screen\/Strainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/4\"-14\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Fittings:\u003c\/strong\u003e T-H Marine THSM-1 and THSM-1XL Thru-Hull Strainer Mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Compatibility:\u003c\/strong\u003e Fits 3\/4\" hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel wire mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572017304\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits any 3\/4\"-14 threaded aerator pump intake, and is the matched strainer for T-H Marine's THSM-1 and THSM-1XL thru-hull strainer mount fittings.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-H Marine AS-1 used for?\u003c\/strong\u003e The AS-1 is a screw-on aerator screen\/strainer that threads onto a 3\/4\"-14 aerator pump intake to keep fish scales, sludge, and debris out of the pump, protecting livewell and baitwell aeration systems from clogs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does the AS-1 aerator screen use?\u003c\/strong\u003e The AS-1 uses a 3\/4\"-14 thread, matching standard aerator pump intake fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AS-1 fit T-H Marine's thru-hull strainer mounts?\u003c\/strong\u003e Yes, the AS-1 is threaded to fit T-H Marine's THSM-1 and THSM-1XL thru-hull strainer mount fittings, seating flush against the mounting wall with no extra nut required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the THSM-1 and THSM-1XL fittings the AS-1 works with?\u003c\/strong\u003e The THSM-1 has a 1-3\/4\" threaded section and 4\" overall length, while the THSM-1XL has a 3\" threaded section and 4-1\/2\" overall length for thicker surface installations; the AS-1 aerator screen threads onto either.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the AS-1 aerator screen made from?\u003c\/strong\u003e The AS-1 is made from stainless steel wire mesh, chosen for corrosion resistance in both freshwater and saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AS-1 aerator screen weigh?\u003c\/strong\u003e The AS-1 aerator screen\/strainer weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose works with the AS-1 fitting?\u003c\/strong\u003e The AS-1 is compatible with 3\/4\" hose connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AS-1 easy to install?\u003c\/strong\u003e Yes, the AS-1 is a screw-on strainer that threads directly onto a 3\/4\"-14 aerator pump intake or onto a THSM-1\/THSM-1XL thru-hull mount, requiring no extra nut or special tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the AS-1 be used for both transom and livewell installations?\u003c\/strong\u003e Yes, when paired with a THSM-1 or THSM-1XL thru-hull mount, the AS-1 works for remote-mounted pumps filling from the transom or recirculating from the livewell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the AS-1 different from T-H Marine's AS-2 or AS-6 screens?\u003c\/strong\u003e The AS-1 is sized for a 3\/4\"-14 thread pump intake, while T-H Marine's AS-2 fits a 1\"-8 thread thru-hull fitting and the AS-6 fits a modified 1-1\/2\" thru-hull, so the correct screen depends on the intake or fitting thread size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with the AS-1?\u003c\/strong\u003e The AS-1 is the aerator screen\/strainer component itself; the matching THSM-1 mount fitting is sold separately unless purchased as the THSM-1KIT, which bundles the mount and screen together.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":49033322856667,"sku":"T-H-AS-1-DP","price":12.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/616Ri0tiR7L.jpg?v=1785244672"},{"product_id":"groco-bp-1-poly-strainer-basket-1-9-x-5-2-inch","title":"Groco BP-1 Poly Strainer Basket, 1.9 x 5.2 Inch","description":"\u003cp\u003eThe Groco BP-1 Poly Strainer Basket is a replacement basket for thru hull strainer assemblies, designed to catch debris, sand, weeds, and other particulate before it can reach a boat's raw water pump or engine cooling system. Measuring 1.9 inches by 5.2 inches, this basket is sized as a drop-in replacement for strainers using this basket format, making it a straightforward maintenance part for boat owners performing routine strainer cleaning and upkeep.\u003c\/p\u003e\u003cp\u003eConstructed of plastic, the BP-1 basket is built to resist corrosion in marine environments, unlike metal mesh baskets that can rust or degrade over time in saltwater or brackish water service. The open-top design allows for easy access when removing the basket for cleaning, so debris can be cleared out without disassembling the entire strainer housing. Keeping a spare on hand or swapping a cracked or clogged basket helps maintain steady raw water flow to onboard cooling systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e BP-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Strainer Basket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 1.9 inches x 5.2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Open Top\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith Lid:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.10625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 742985174955\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Groco BP-1 used for?\u003c\/strong\u003e The Groco BP-1 is a plastic strainer basket used inside a thru hull strainer housing to catch debris, sand, and weeds before raw water reaches a boat's cooling system pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the BP-1 strainer basket?\u003c\/strong\u003e The BP-1 measures 1.9 inches by 5.2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the BP-1 basket made from?\u003c\/strong\u003e It is made of plastic, which resists corrosion in marine water compared to metal mesh baskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the BP-1 basket come with a lid?\u003c\/strong\u003e No, the Groco BP-1 has an open-top design and does not include a lid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the BP-1 basket weigh?\u003c\/strong\u003e The BP-1 weighs 0.10625 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I clean the BP-1 strainer basket?\u003c\/strong\u003e The BP-1's open-top design allows it to be lifted out of the strainer housing so accumulated debris can be rinsed or knocked out, then reinstalled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the BP-1 a genuine Groco part?\u003c\/strong\u003e Yes, the BP-1 is a genuine Groco manufacturer part number, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the plastic basket crack over time?\u003c\/strong\u003e Plastic construction on the BP-1 is chosen for corrosion resistance, and replacing a cracked or clogged basket is a normal part of strainer maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the BP-1?\u003c\/strong\u003e The BP-1 order includes one Groco poly strainer basket, sized 1.9 inches by 5.2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace a strainer basket instead of the whole strainer?\u003c\/strong\u003e If only the basket portion is cracked, worn, or missing, replacing the BP-1 basket alone restores debris filtering without the cost of a full strainer housing replacement.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49033324265691,"sku":"GRO-BP-1","price":41.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51GDPTBK1yL_13fdd7dd-4fd6-483a-8d50-cec08722f3cc.jpg?v=1785244764"},{"product_id":"groco-bp-4-poly-strainer-basket-2-6-x-7-5-inches","title":"Groco BP-4 Poly Strainer Basket, 2.6 x 7.5 Inches","description":"\u003cp\u003eThe Groco BP-4 is a polypropylene replacement basket sized 2.6 inches by 7.5 inches, built for use inside raw water strainer housings aboard boats. It is molded in durable black plastic and features an open-top, no-lid design that lets the basket slide in and out of the strainer bowl for quick cleaning and inspection. As the filtering element of a raw water strainer system, the basket catches debris, weeds, sand, and other particulate before it can reach the engine, air conditioning pump, generator, or other water-cooled equipment, protecting downstream components from clogging and damage.\u003c\/p\u003e\u003cp\u003eThe basket's perforated wall design allows water to pass through while trapping solids, and its rigid plastic construction resists corrosion and saltwater degradation better than metal mesh alternatives over time. A molded handle on top makes it easy to grip and lift the basket out of the strainer body for rinsing or replacement. This is a single basket, sold individually, intended as a direct replacement or spare for strainer housings that accept a basket of this size.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e BP-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Strainer Basket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.6 inches x 7.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid:\u003c\/strong\u003e No lid, open top\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 basket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Groco BP-4 strainer basket?\u003c\/strong\u003e The Groco BP-4 measures 2.6 inches by 7.5 inches, so measure your existing strainer basket or housing opening against these dimensions before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the BP-4 basket made from?\u003c\/strong\u003e It is molded from black plastic (polypropylene-type material), which resists corrosion and saltwater degradation better than a metal mesh basket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Groco BP-4 basket come with a lid?\u003c\/strong\u003e No, the BP-4 is an open-top basket with no lid; it is designed to sit inside a separate strainer housing that has its own cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many baskets are included when I order a Groco BP-4?\u003c\/strong\u003e Each order of the Groco BP-4 includes one basket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Groco BP-4 basket used for?\u003c\/strong\u003e It functions as the filtering element inside a raw water strainer, catching debris, weeds, and sand before the water reaches engine or pump cooling systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Groco BP-4 basket weigh?\u003c\/strong\u003e The BP-4 basket weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I clean or replace the BP-4 basket?\u003c\/strong\u003e Open the strainer housing lid, lift the BP-4 basket out by its molded handle, rinse out trapped debris, and reinsert it, or swap in a new BP-4 if it is cracked or worn.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Groco BP-4 a genuine Groco part?\u003c\/strong\u003e Yes, the BP-4 is a genuine Groco strainer basket, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the BP-4 basket fit any strainer housing?\u003c\/strong\u003e It is sized for strainer housings designed to accept a 2.6 inch by 7.5 inch basket; check your housing's basket opening before purchasing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the basket use an open-top design instead of a sealed lid?\u003c\/strong\u003e The open-top design on the Groco BP-4 lets water flow freely through the perforated sides while making it simple to slide the basket in and out for cleaning.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49033324363995,"sku":"GRO-BP-4","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51GDPTBK1yL_516b4c59-07d4-49ef-b086-160d002849da.jpg?v=1785244763"},{"product_id":"groco-bp-3-poly-strainer-basket-black-polyethylene-replacement-basket-for-raw-water-strainers","title":"Groco BP-3 Poly Strainer Basket, Black Polyethylene Replacement Basket for Raw Water Strainers","description":"\u003cp\u003eThe Groco BP-3 is a replacement poly strainer basket designed to fit inside compatible raw water strainer housings on boats, removing debris and sediment before water reaches the engine, pump, or plumbing system. The basket is molded from black polyethylene, a material chosen for its resistance to saltwater corrosion, cracking, and UV degradation, making it suitable for continuous marine service where metal baskets would eventually rust or pit. The open-top construction allows quick access for cleaning: simply lift the basket out, empty accumulated debris, rinse, and reinstall, without needing tools or gaskets. At 2.6 inches by 7.3 inches, the BP-3 is sized for standard thru-hull strainer housings that accept this basket profile, and its light weight of 0.2125 pounds means it adds negligible load to the strainer assembly. As a genuine Groco part, the BP-3 is manufactured to the same dimensions and fit as the original equipment basket it replaces, so boat owners can restore proper strainer function without modifying the housing. This basket is commonly kept as a spare or replacement item for routine strainer maintenance, since baskets can become brittle or damaged over time from sun exposure and repeated handling during cleaning.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e BP-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyethylene (plastic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasket Dimensions:\u003c\/strong\u003e 2.6 inches x 7.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2125 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Open top\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Thru hull fittings and strainers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 742985174979\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Groco BP-3 used for?\u003c\/strong\u003e The Groco BP-3 is a poly strainer basket that sits inside a raw water strainer housing to catch debris and sediment before water reaches onboard pumps or the engine cooling system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the BP-3 basket?\u003c\/strong\u003e The BP-3 basket measures 2.6 inches by 7.3 inches, sized to fit into compatible strainer housings that accept this basket profile.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the BP-3 basket made from?\u003c\/strong\u003e It is made from black polyethylene, a plastic chosen for its resistance to saltwater corrosion and cracking compared to metal baskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the BP-3 basket weigh?\u003c\/strong\u003e The Groco BP-3 weighs 0.2125 pounds, making it a lightweight component within a strainer assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the BP-3 a genuine Groco part?\u003c\/strong\u003e Yes, the BP-3 is a genuine Groco manufacturer part, not a generic aftermarket substitute, and carries the Groco part number BP-3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I clean the BP-3 strainer basket?\u003c\/strong\u003e Because the BP-3 has an open-top design, it can be lifted straight out of the strainer housing, emptied of debris, rinsed, and reinstalled without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the BP-3 come with a lid?\u003c\/strong\u003e No, the BP-3 is an open-top basket and does not include a lid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the BP-3 basket?\u003c\/strong\u003e The BP-3 poly strainer basket is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many baskets come in one BP-3 order?\u003c\/strong\u003e An order of the BP-3 includes one strainer basket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace a strainer basket instead of the whole strainer housing?\u003c\/strong\u003e Baskets like the BP-3 wear out or become brittle from sun exposure and repeated cleaning cycles well before the strainer housing itself needs replacement, so replacing just the basket restores full strainer function at lower cost.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49033324396763,"sku":"GRO-BP-3","price":51.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51GDPTBK1yL.jpg?v=1785244763"},{"product_id":"groco-bp-6-poly-strainer-basket-plastic-replacement-basket-black-1-gallon-capacity-3-1-x-10-1","title":"Groco BP-6 Poly Strainer Basket - Plastic Replacement Basket, Black, 1 Gallon Capacity, 3.1 x 10.1","description":"\u003cp\u003eThe Groco BP-6 is a replacement poly strainer basket sized to fit inside compatible Groco strainer housings, capturing debris and marine growth before it reaches onboard plumbing, pumps, or engine cooling intakes. Built from durable plastic, the basket resists the corrosion and degradation that can affect metal baskets in continuous saltwater or freshwater service, making it a long-lasting option for routine strainer maintenance.\u003c\/p\u003e\u003cp\u003eThe BP-6 features an open-top design that allows for quick removal and cleaning, so buildup can be cleared out without tools or disassembling the strainer body. It measures 3.1 x 10.1 and holds a 1 gallon capacity, and is finished in black. At a light 0.30625 pounds, it is easy to lift out, rinse, and reseat during regular inspections.\u003c\/p\u003e\u003cp\u003eThis basket is sold as a standalone replacement part identified by the Groco part number BP-6, making it straightforward to order the correct basket size when replacing a worn, cracked, or clogged unit in a compatible Groco strainer setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Groco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e BP-6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.1 x 10.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 1 gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Open Top\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.30625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 742985175006\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Groco BP-6?\u003c\/strong\u003e The BP-6 is a poly strainer basket made by Groco, designed as a replacement basket for compatible Groco strainer housings, catching debris before it enters onboard plumbing or cooling systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the BP-6 basket made from?\u003c\/strong\u003e It is made from plastic, chosen for its resistance to corrosion in wet marine environments compared to metal basket alternatives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the BP-6 strainer basket?\u003c\/strong\u003e The Groco BP-6 is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the BP-6 basket?\u003c\/strong\u003e The BP-6 measures 3.1 x 10.1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much debris can the BP-6 hold?\u003c\/strong\u003e The BP-6 basket has a 1 gallon capacity before it needs to be emptied and cleaned.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the BP-6 basket have a lid?\u003c\/strong\u003e No, the Groco BP-6 is an open-top basket with no lid, which allows for quick removal and cleaning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the BP-6 basket weigh?\u003c\/strong\u003e The BP-6 weighs 0.30625 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the BP-6 a genuine Groco part?\u003c\/strong\u003e Yes, BP-6 is the genuine Groco manufacturer part number for this poly strainer basket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I clean the BP-6 basket?\u003c\/strong\u003e Because the BP-6 has an open-top design, it can be lifted out of the strainer housing and rinsed clean without needing to disassemble the strainer body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Groco BP-6?\u003c\/strong\u003e The UPC for the Groco BP-6 poly strainer basket is 742985175006.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"Default Title","offer_id":49033324429531,"sku":"GRO-BP-6","price":58.17,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51GDPTBK1yL_c46663cb-3629-435f-af34-695b2365009d.jpg?v=1785244770"},{"product_id":"groco-bs-series-stainless-steel-strainer-basket-available-in-1-9-x-5-2-to-3-1-x-10-1","title":"Groco BS Series Stainless Steel Strainer Basket - Available in 1.9\" x 5.2\" to 3.1\" x 10.1\"","description":"\u003cp\u003eThe Groco BS Series Strainer Basket is a replacement basket engineered to fit inside Groco raw water strainer housings, catching sand, weeds, shells, and other debris before it can reach a pump, engine, or air conditioning unit. Machined from stainless steel for long-term resistance to saltwater corrosion, the basket features a reinforced handle for easy removal during routine cleaning and a perforated wall pattern sized to maximize flow while still trapping harmful debris. Whether you are replacing a worn original-equipment basket or upgrading a strainer housing, matching the correct basket size to your strainer body is essential for a proper seal and unrestricted water flow.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Groco\u003c\/li\u003e\n\u003cli\u003eMaterial: Stainless Steel\u003c\/li\u003e\n\u003cli\u003eMounting Type: Base Mount\u003c\/li\u003e\n\u003cli\u003eSpecial Feature: Improved Handle Design, Durable Stainless Steel\u003c\/li\u003e\n\u003cli\u003eSizes: 1.9\" x 5.2\", 2.6\" x 7.3\", 2.6\" x 7.5\", 3.1\" x 10.1\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis strainer basket is offered in four sizes to match different Groco strainer housing models. Before ordering, measure the diameter and height of the basket currently installed in your strainer body, or check your strainer model number against Groco's fitment chart, to confirm which size corresponds to your housing. Installing an undersized or oversized basket can prevent a proper seal and allow unfiltered water to bypass the strainer.\u003c\/p\u003e","brand":"Groco","offers":[{"title":"1.9\" x 5.2\" (BS-1)","offer_id":49047351984347,"sku":"GRO-BS-1","price":44.45,"currency_code":"USD","in_stock":true},{"title":"2.6\" x 7.3\" (BS-3)","offer_id":49047352017115,"sku":"GRO-BS-3","price":50.99,"currency_code":"USD","in_stock":false},{"title":"2.6\" x 7.5\" (BS-4)","offer_id":49047352049883,"sku":"GRO-BS-4","price":50.34,"currency_code":"USD","in_stock":false},{"title":"3.1\" x 10.1\" (BS-6)","offer_id":49047352082651,"sku":"GRO-BS-6","price":60.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51KSwGPR8sL_4088aade-56d2-4e03-9963-4c0cc4075955.jpg?v=1785420522"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/mount-screen-1-3-4-threaded-length-black-thsm-1kit-dp-thru-hull-strainer-mount-28009713860651.jpg?v=1785356962","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-pumps-plumbing-sanitation-thru-hulls-valves-strainers-strainers-strainer-baskets.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}