{"title":"Fresh Water Tanks","description":null,"products":[{"product_id":"sea-dog-351300-1-hose-deck-fill-body-316-stainless-steel-1-1-2-inch-hose-body-only-keyless-cap-compatible","title":"Sea-Dog Hose Deck Fill Body, 316 Stainless Steel, Body Only for 1-1\/2 Inch Hose - 351300-1","description":"\u003cp\u003eThe Sea-Dog 351300-1 is the body-only component of Sea-Dog's Hose Deck Fill system, sized for 1-1\/2 inch hose. This listing is the deck fill body alone (no cap included), letting boat owners replace a damaged or corroded fill body without buying a full new assembly, or pair it with the cap of their choice from Sea-Dog's color-coded lineup (diesel green, water blue, or waste black).\u003c\/p\u003e\u003cp\u003eThe body is constructed of investment cast 316 stainless steel for corrosion resistance in marine environments. It uses an 11-1\/2 NPSM straight thread pitch, the same threading Sea-Dog's replacement caps are designed to engage, so compatible caps thread on securely for a proper seal at the deck.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the body mounts with three #10 flat-head fasteners (not included) through the deck. USCG regulations require a bonding wire connection at the fill to prevent sparking, so the body should be wired into the boat's bonding system during installation. A flange gasket (part number 351349) is sold separately and is recommended for a watertight seal between the body and the deck.\u003c\/p\u003e\u003cp\u003eThis body is intended for 1-1\/2 inch hose connections and is part of Sea-Dog's broader Hose Deck Fill product family, which includes color-coded replacement caps, O-rings, and gaskets sold individually.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351300-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Hose Deck Fill Body (Body Only, No Cap)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment cast 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.728 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Three #10 flat-head fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket:\u003c\/strong\u003e Sold separately, Flange Gasket part number 351349\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding:\u003c\/strong\u003e Requires bonding wire connection per USCG regulations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514351966\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 351300-1 come with a cap?\u003c\/strong\u003e No. The 351300-1 is the deck fill body only, with no cap included, so it should be paired with a Sea-Dog replacement cap sized for 1-1\/2 inch hose fittings, such as the color-coded diesel, water, or waste caps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size is this deck fill body designed for?\u003c\/strong\u003e The 351300-1 deck fill body is sized for 1-1\/2 inch hose connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 351300-1 deck fill body made of?\u003c\/strong\u003e It is made of investment cast 316 stainless steel, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 351300-1 deck fill body weigh?\u003c\/strong\u003e The Sea-Dog 351300-1 weighs 0.728 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread does the deck fill body use?\u003c\/strong\u003e The 351300-1 body uses an 11-1\/2 NPSM straight thread pitch, matching the thread on Sea-Dog's compatible replacement caps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is needed to install the 351300-1?\u003c\/strong\u003e Installation requires three #10 flat-head fasteners, which are not included with the 351300-1 deck fill body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a gasket included with the 351300-1?\u003c\/strong\u003e No, a gasket is not included. Sea-Dog sells a matching flange gasket separately under part number 351349 for a watertight seal at the deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this deck fill need to be bonded?\u003c\/strong\u003e Yes. USCG regulations require a bonding wire connection at the 351300-1 deck fill body to prevent sparking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 351300-1 body with any Sea-Dog deck fill cap?\u003c\/strong\u003e The 351300-1 body threads with 11-1\/2 NPSM straight thread pitch, the same threading used on Sea-Dog's 1-1\/2 inch replacement caps, so it is intended to pair with those caps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I buy the deck fill body separately instead of a complete kit?\u003c\/strong\u003e The 351300-1 lets you replace just the body of a Sea-Dog Hose Deck Fill if it is damaged or corroded, without having to replace a still-serviceable cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 351300-1?\u003c\/strong\u003e The UPC for the Sea-Dog 351300-1 deck fill body is 035514351966.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988759097563,"sku":"S-D-351300-1","price":61.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4803.jpg?v=1784428920"},{"product_id":"sea-dog-351321-1-diesel-deck-fill-1-1-2-hose-316-stainless-steel-with-locking-keyed-cap-and-chain","title":"Sea-Dog Locking Diesel Hose Deck Fill, 1-1\/2 Inch Hose, 316 Stainless Steel, Part 351321-1","description":"\u003cp\u003eThe Sea-Dog 351321-1 is a locking hose-style deck fill built for diesel fuel systems using 1-1\/2 inch fill hose. Its locking cap is designed to prevent fuel theft: the cap spins freely while in the locked position, and to unlock it the owner turns the included key until the keyhole lines up with the cap tabs. Two keys are supplied along with a cap attachment cable, so the cap stays tethered to the boat and cannot be misplaced during fueling.\u003c\/p\u003e\u003cp\u003eThe fitting is investment cast from 316 stainless steel, a corrosion-resistant alloy suited to long-term saltwater exposure, giving the deck fill durability well beyond stamped or plated fittings. The cap measures 2-1\/8 inches in diameter and threads onto a 11-1\/2 NPSM straight thread pitch. The body is marked \"Diesel\" and color-coded per the international deck fill identification system, so crew and fuel dock staff can confirm the correct fuel type at a glance and avoid a costly misfueling.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the deck fill mounts with three #10 flathead fasteners (fasteners not included), and it accepts standard 1-1\/2 inch fill hose. Because a deck fill sits in an open fuel-vapor path, USCG regulations require a bonding wire be connected to the fitting to prevent sparking; installers should wire the bonding connection as part of the install. This deck fill is sold individually.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351321-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Marking:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 2-1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Type:\u003c\/strong\u003e Locking, spins freely when locked\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Keys:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Attachment Cable:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #10 FH (flathead), 3 required, not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment cast 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.966 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding:\u003c\/strong\u003e USCG-required bonding wire connection to prevent sparking\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat fuel type is the Sea-Dog 351321-1 deck fill designed for?\u003c\/strong\u003e The 351321-1 is marked and color-coded for Diesel fuel, so it should be installed on the diesel fill line rather than a gasoline or water fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does this deck fill accept?\u003c\/strong\u003e It is built for 1-1\/2 inch fill hose; a separate 2 inch hose version of this locking diesel deck fill is available as a different part number if a larger hose is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the locking cap work?\u003c\/strong\u003e The cap on part 351321-1 spins freely while locked so it cannot be forced open; to unlock it, turn the supplied key until the keyhole lines up with the cap tabs, then the cap can be removed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many keys come with the deck fill?\u003c\/strong\u003e Two keys are included with the Sea-Dog 351321-1 locking deck fill, along with a cap attachment cable to keep the cap tethered to the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 351321-1 deck fill made from?\u003c\/strong\u003e It is investment cast from 316 stainless steel, a corrosion-resistant grade chosen for long-term durability in a marine saltwater environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the mounting fasteners?\u003c\/strong\u003e The deck fill installs with three #10 flathead fasteners; the fasteners themselves are not included with part 351321-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cap diameter and thread pitch on this deck fill?\u003c\/strong\u003e The cap measures 2-1\/8 inches in diameter and uses an 11-1\/2 NPSM straight thread pitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bonding wire required for installation?\u003c\/strong\u003e Yes, USCG regulations require a bonding wire be connected to the 351321-1 deck fill to prevent sparking around fuel vapors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this deck fill weigh?\u003c\/strong\u003e The Sea-Dog 351321-1 diesel hose deck fill weighs 0.966 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the deck fill come with a non-locking cap option?\u003c\/strong\u003e The 351321-1 is the locking-cap version; Sea-Dog also offers a replacement non-locking cap (part 351391-1) as a separate accessory for this deck fill line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this deck fill sold as a single unit?\u003c\/strong\u003e Yes, the 351321-1 is packaged and sold as a standard pack of 1 each.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988759228635,"sku":"S-D-351321-1","price":48.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7144.jpg?v=1784428934"},{"product_id":"sea-dog-513110-1-fresh-water-inlet-316-stainless-steel-dockside-shore-water-hookup-1-2-fipt-x-3-4-fght","title":"Sea-Dog Fresh Water Inlet, 316 Stainless Steel, 1\/2 Inch FIPT x 3\/4 Inch FGHT - 513110-1","description":"\u003cp\u003eThe Sea-Dog Fresh Water Inlet (513110-1) provides a fresh water hookup point on a boat's hull, letting you connect a standard garden hose to a pressurized onboard water system while moored at a dock or marina. It uses a standard female swivel hose connector so a hose threads on and off easily, and it comes with a black plastic watertight plug that seals the fitting when it is not connected to shore water, keeping the pipe run protected and free of debris.\u003c\/p\u003e\u003cp\u003eThe inlet is machined from investment cast 316 stainless steel, a corrosion-resistant alloy chosen for marine hardware that stays exposed to saltwater spray and weather. The pipe connection is 1\/2 inch FIPT (female iron pipe thread) on the inboard side and 3\/4 inch FGHT (female garden hose thread) on the outboard side, matching common marine plumbing and standard garden hose fittings. It mounts through the hull or deck with a #8 flat head fastener and is installed or removed using a 1\/2 inch Allen wrench.\u003c\/p\u003e\u003cp\u003eThis is deck hardware for the plumbing side of a boat's fresh water system rather than an engine or drivetrain component, so it fits any boat with a pressurized fresh water system and a suitable mounting location, without being tied to a specific engine or hull make.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 513110-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fresh Water Inlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Size:\u003c\/strong\u003e 1\/2 inch FIPT x 3\/4 inch FGHT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Standard female swivel hose connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 2-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #8 FH (flat head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Black plastic watertight plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Tool:\u003c\/strong\u003e 1\/2 inch Allen wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514513036\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 513110-1 used for?\u003c\/strong\u003e The Sea-Dog 513110-1 is a fresh water inlet that lets you hook a garden hose to a boat's pressurized fresh water system while docked, so you can fill onboard tanks or run water without using the boat's own pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose fitting does this inlet use?\u003c\/strong\u003e It has a standard female swivel hose connector on the outside, with a 1\/2 inch FIPT x 3\/4 inch FGHT pipe size connecting to the boat's plumbing, so a standard garden hose or shore water hose threads directly on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 513110-1 made from?\u003c\/strong\u003e It is machined from investment cast 316 stainless steel, a corrosion-resistant grade commonly used in marine deck hardware that is regularly exposed to saltwater and weather.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fresh water inlet come with a cap or plug?\u003c\/strong\u003e Yes, the Sea-Dog 513110-1 includes a black plastic watertight plug that seals the connector when it is not hooked up to a shore water hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tool do I need to install this fitting?\u003c\/strong\u003e Installation and removal of the 513110-1 fresh water inlet uses a 1\/2 inch Allen wrench along with a #8 flat head fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog fresh water inlet weigh?\u003c\/strong\u003e The 513110-1 weighs 0.45 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the mounting dimensions of the 513110-1?\u003c\/strong\u003e The fitting measures 2-3\/4 inches at dimension A, 2-3\/8 inches at dimension B, 2-3\/16 inches at dimension C, and 1 inch at dimension D, secured with a #8 flat head fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the male or female hose connection?\u003c\/strong\u003e The 513110-1 fresh water inlet has a standard female swivel hose connector, designed to receive a male hose fitting from a garden hose or shore water supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this fresh water inlet and Sea-Dog's washdown water outlet?\u003c\/strong\u003e The 513110-1 fresh water inlet has a female swivel hose connector for supplying water into the boat's pressurized system, while Sea-Dog's washdown water outlet is a separate part with a male hose connector for drawing water out to a washdown hose; the two look similar but serve opposite functions and are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fitting work on any boat?\u003c\/strong\u003e The 513110-1 is deck hardware for a boat's fresh water plumbing and is not tied to a specific engine or hull make, so it fits any boat with a pressurized fresh water system and a suitable mounting location for the 1\/2 inch FIPT x 3\/4 inch FGHT connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a shutoff valve needed with this inlet?\u003c\/strong\u003e The fresh water inlet itself is a hose hookup fitting; the dossier does not specify an integrated shutoff, so check your onboard plumbing for a valve if one is needed to regulate flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 513110-1?\u003c\/strong\u003e The UPC for the Sea-Dog Fresh Water Inlet, part number 513110-1, is 035514513036.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825125083,"sku":"S-D-513110-1","price":34.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7173.jpg?v=1784429688"},{"product_id":"moeller-marine-20-gallon-water-tank-040220-fda-grade-polyethylene-fresh-water-holding-tank-for-boats-rvs","title":"Moeller Marine 20 Gallon Water Tank, Polyethylene, Model 040220","description":"\u003cp\u003eThe Moeller Marine 20 Gallon Water Tank (040220) is a polyethylene freshwater tank built for onboard water storage on boats and RVs. Molded from resin that meets FDA specifications for polymers used in contact with food, the tank keeps stored water safe, odor-free, and free of plastic taste transfer. It satisfies U.S. Coast Guard standards for onboard water storage and is designed to hold up to the marine environment without degrading water quality over time.\u003c\/p\u003e\u003cp\u003eThe tank provides standard NPT openings for vent, fill, and drain connections, making it straightforward to plumb into an existing freshwater system using common marine fittings. Its polyethylene construction resists corrosion, cracking, and the freshwater\/vapor exposure typical of below-deck installations, and the material will not leach taste or odor into the water it holds. With a 20 gallon (76 liter) capacity, it suits boats needing a mid-size dedicated freshwater reservoir.\u003c\/p\u003e\u003cp\u003eMoeller offers this tank across a range of sizes, and the 040220 is the 20 gallon version, sized 21.00 x 17.00 x 14.00 x 8.50 inches (533 x 432 x 356 x 216 mm). It is intended as a direct-fit replacement or new installation for boaters upgrading or repairing their freshwater storage system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040220\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 20 gallons (76 liters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Dimensions:\u003c\/strong\u003e 21.00 x 17.00 x 14.00 x 8.50 inches (533 x 432 x 356 x 216 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15.13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyethylene (PE), Resin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpenings:\u003c\/strong\u003e Standard NPT openings for vent, fill, and drain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e Meets FDA specifications for polymers in contact with food; satisfies U.S. Coast Guard standards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729402207\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal freshwater tank; not vehicle- or engine-specific. Confirm available mounting space matches the 21.00 x 17.00 x 14.00 x 8.50 inch (533 x 432 x 356 x 216 mm) footprint before installing.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the capacity of the Moeller 040220 water tank?\u003c\/strong\u003e The Moeller Marine 040220 water tank holds 20 gallons (76 liters) of freshwater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 040220 water tank?\u003c\/strong\u003e The 040220 measures 21.00 x 17.00 x 14.00 x 8.50 inches (533 x 432 x 356 x 216 mm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 040220 water tank weigh?\u003c\/strong\u003e This tank weighs 15.13 pounds empty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Moeller 040220 tank made of?\u003c\/strong\u003e It is molded from polyethylene (PE) resin, the same family of plastic used across Moeller's water and waste tank line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this tank safe for drinking water?\u003c\/strong\u003e Yes, the 040220 is made from resin that meets FDA specifications for polymers in contact with food, so it will not filter taste or emit odors into stored water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 040220 meet Coast Guard requirements?\u003c\/strong\u003e The tank satisfies U.S. Coast Guard standards for onboard water storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connections does the 040220 water tank have?\u003c\/strong\u003e It provides standard NPT openings for vent, fill, and drain, so it accepts common marine plumbing fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this tank leach taste or odor into my water over time?\u003c\/strong\u003e No, the polyethylene construction of the 040220 will not filter taste into water or emit odors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 040220 as a replacement for my boat's existing water tank?\u003c\/strong\u003e Yes, as long as the mounting space matches its 21.00 x 17.00 x 14.00 x 8.50 inch (533 x 432 x 356 x 216 mm) footprint, the 040220 can replace an existing 20 gallon freshwater tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Moeller make this tank in other sizes?\u003c\/strong\u003e Yes, the 040220 is the 20 gallon version in Moeller's tank lineup, which spans a range of gallon capacities in the same product family.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Moeller 040220 tank corrosion resistant?\u003c\/strong\u003e Yes, because it is molded from polyethylene rather than metal, the 040220 is not subject to the corrosion that affects metal water tanks.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991091491035,"sku":"MOE-040220","price":329.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/040220__94903.1722512031.500.750.jpg?v=1785188412"},{"product_id":"gen3-marine-316-stainless-steel-water-deck-fill-with-locking-key-and-chain-1-1-2-hose","title":"Gen3 Marine Stainless Steel Water Deck Fill with Key, 1-1\/2 Inch Hose, 316 Stainless Steel","description":"\u003cp\u003eThe Gen3 Marine Water Deck Fill (part number 5-9002) is a 316 stainless steel deck fitting used to fill a boat's freshwater tank from the deck without opening a hatch or accessing the tank directly. It is built for a 1-1\/2 inch hose connection and mounts flush to the deck, giving marine and RV builds a corrosion-resistant, low-profile fill point that holds up to sun, salt spray, and regular deck traffic.\u003c\/p\u003e\u003cp\u003eThe cap uses a slotted, straight-thread design that requires a key to open, adding a layer of security against unauthorized access to the fresh water system. The key is attached to the deck fill body by a chain, so the cap cannot be set down and lost or dropped overboard while the tank is being filled. The entire fitting -- body, cap, and chain -- is made from 316 stainless steel, a marine-grade alloy chosen for its resistance to rust and pitting in saltwater environments.\u003c\/p\u003e\u003cp\u003eThis deck fill measures 3-1\/4 inches in length with a 3 inch diameter opening and connects to 1-1\/2 inch hose. It ships with the key included; mounting hardware is sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-9002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Water Deck Fill with Key\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 3 x 3 x 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Type:\u003c\/strong\u003e Slotted, keyed cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e Straight thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Key and attachment chain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Gen3 Marine 5-9002 deck fill use?\u003c\/strong\u003e The Gen3 Marine 5-9002 water deck fill is sized for a 1-1\/2 inch hose connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this deck fill come with a key?\u003c\/strong\u003e Yes, the Gen3 Marine 5-9002 ships with a key that operates the slotted cap, and the key is attached to the fitting by a chain so it will not be misplaced during use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 5-9002 deck fill made from?\u003c\/strong\u003e It is made from 316 stainless steel, a marine-grade alloy selected for corrosion resistance in saltwater and general deck exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this deck fill?\u003c\/strong\u003e The Gen3 Marine 5-9002 measures 3-1\/4 inches in length with a 3 inch diameter opening, and has overall item dimensions of 3 x 3 x 3.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 5-9002 deck fill weigh?\u003c\/strong\u003e The Gen3 Marine 5-9002 water deck fill weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with this deck fill?\u003c\/strong\u003e No, mounting hardware is sold separately from the Gen3 Marine 5-9002 deck fill; only the fill fitting, cap, key, and attachment chain are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this deck fill require a key to open?\u003c\/strong\u003e The 5-9002 uses a slotted cap that requires a key for added security, preventing the freshwater fill from being opened by anyone without the matching key.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of thread does the 5-9002 deck fill use?\u003c\/strong\u003e The Gen3 Marine 5-9002 uses a straight thread cap design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this deck fill used for fuel or water?\u003c\/strong\u003e The Gen3 Marine 5-9002 is a water deck fill, intended for filling a freshwater tank rather than a fuel system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens if I lose the cap while filling the tank?\u003c\/strong\u003e The cap on the 5-9002 is connected to the deck fill body by an attachment chain, so it stays tethered to the fitting and cannot be dropped or lost while removed to fill the tank.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991699894491,"sku":"GEN-5-9002","price":17.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/GEN-5-9002__92378.1722488674.500.750.jpg?v=1785164331"},{"product_id":"star-brite-32300-aqua-water-tank-system-flush-1-gallon-fresh-water-system-cleaner-deodorizer-for-boats-rvs","title":"Star brite Aqua Water Tank \u0026 System Flush, 1 Gallon Concentrate for Boats and RVs","description":"\u003cp\u003eStar brite Aqua Water Tank \u0026amp; System Flush is a concentrated liquid treatment formulated to deep-clean and deodorize fresh water holding tanks and the entire onboard water system, including pipes and faucets, on boats and RVs. It targets the foul taste and odor that develop after long periods of non-use or when a tank has been filled from a questionable water source, and it is especially useful when a boat or RV is coming out of seasonal or long-term storage.\u003c\/p\u003e\u003cp\u003eThe formula works by breaking down and removing the scale and sediment buildup inside tanks and plumbing that is the underlying cause of bad-tasting or bad-smelling water. It is a concentrated descaler: one gallon treats up to one hundred gallons of water system capacity, so a single container serves as a multi-use supply for recurring maintenance. The product is an unscented liquid, sold in a one gallon (128.5 fluid ounce) container.\u003c\/p\u003e\u003cp\u003eStar brite Aqua Water Tank \u0026amp; System Flush is intended for use in fresh water tanks and supply systems only. It will not neutralize head chemicals if it drains into gray or black water tanks, so it should be kept out of those systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Star brite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 32300\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Liquid, concentrated descaler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Volume:\u003c\/strong\u003e 1 gallon (128.5 fluid ounces)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e One gallon treats 100 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScent:\u003c\/strong\u003e Unscented\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 4 x 7.5 x 11 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Recommendation:\u003c\/strong\u003e Fresh water tanks and supply systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 071247323009\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does Star brite Aqua Water Tank \u0026amp; System Flush do?\u003c\/strong\u003e It deep-cleans and deodorizes fresh water holding tanks and the entire water system, including pipes and faucets, removing the scale and sediment that cause foul taste and odor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much water does one gallon of 32300 treat?\u003c\/strong\u003e One gallon of Star brite Aqua Water Tank \u0026amp; System Flush treats up to one hundred gallons of fresh water system capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this safe to drain into gray or black water tanks?\u003c\/strong\u003e No. Star brite Aqua Water Tank \u0026amp; System Flush will not neutralize head chemicals if it drains into gray or black water tanks, so it should only be used in fresh water systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I use this product?\u003c\/strong\u003e It is designed for cleaning the entire fresh water drinking system after long periods of non-use, or when a questionable water source has been used, and is commonly applied when a boat or RV is coming out of seasonal or long-term storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size container does part number 32300 come in?\u003c\/strong\u003e Star brite Aqua Water Tank \u0026amp; System Flush is sold in a one gallon container (128.5 fluid ounces).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the product have a scent?\u003c\/strong\u003e No, this formula is unscented.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 32300 gallon container weigh?\u003c\/strong\u003e The Star brite Aqua Water Tank \u0026amp; System Flush gallon weighs 8.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat causes the bad taste or odor this product removes?\u003c\/strong\u003e Scale and sediment buildup inside fresh water tanks and plumbing is the underlying cause of foul taste and smell, and this flush is formulated to remove that buildup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this be used on both boats and RVs?\u003c\/strong\u003e Yes, Star brite Aqua Water Tank \u0026amp; System Flush is designed for fresh water tanks and supply systems in both boats and RVs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 32300 a one-time treatment or reusable across multiple tank cleanings?\u003c\/strong\u003e Because one gallon treats up to one hundred gallons, a single container of Star brite Aqua Water Tank \u0026amp; System Flush can be used across multiple cleaning cycles rather than being consumed in a single use.\u003c\/p\u003e","brand":"Star brite","offers":[{"title":"Default Title","offer_id":48991712837851,"sku":"STR-32300","price":28.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/32300.A1_8909b01f-4eea-4755-b379-ea4fea077204.jpg?v=1784510367"},{"product_id":"star-brite-aqua-water-shock-potable-water-odor-and-taste-remover-16-ounce","title":"Star brite Aqua Water Shock Potable Water Odor and Taste Remover, 16 Ounce","description":"\u003cp\u003eStar brite Aqua Water Shock is a 16 ounce concentrated treatment that effectively removes unpleasant odors and tastes from food-safe water tanks with simple dilution. It is designed for boats, vehicles, trailers, marine engines, and fishing gear, making it a versatile solution for anyone maintaining a potable water system. The formula targets the common causes of bad-tasting or foul-smelling tank water, including chlorine, sulphur, plastic, and metal odors and tastes, restoring water to a fresh, drinkable condition.\u003c\/p\u003e\u003cp\u003eThis treatment is especially useful after seasonal storage, when water systems that have sat unused often develop stale or chemical off-flavors, or any time a water system needs a refresh. Just 1 fluid ounce treats up to 10 gallons of water, so the 16 ounce bottle provides significant treatment capacity per container. The formula is engineered to deliver a long-lasting effect, continuing to keep water tasting and smelling fresh even in extreme temperatures. It is intended for use in food-safe water tanks and will not etch or damage metal, plastic, fiberglass, or painted surfaces.\u003c\/p\u003e\u003cp\u003eStar brite Aqua Water Shock is part of a broader potable water care routine and pairs with ongoing water treatment and freshening products for year-round maintenance. It is a simple, dilution-based product that requires no special tools or disassembly to use, making it accessible for routine tank care.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Star brite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 97116\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Aqua Water Shock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume:\u003c\/strong\u003e 16 ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\/Active Type:\u003c\/strong\u003e ClO2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 071247971163\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDilution Ratio:\u003c\/strong\u003e 1 fluid ounce per 10 gallons of water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Water System Treatment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended Use:\u003c\/strong\u003e Boats, vehicles, trailers, marine engines, fishing gear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does Star brite Aqua Water Shock do?\u003c\/strong\u003e It removes unpleasant odors and tastes from food-safe water tanks, including odors and tastes caused by chlorine, sulphur, plastic, or metal, restoring the water to a fresh condition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much Aqua Water Shock do I use per tank?\u003c\/strong\u003e Use 1 fluid ounce of Aqua Water Shock for every 10 gallons of water in the tank, diluting before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow large is the bottle of Aqua Water Shock?\u003c\/strong\u003e The Star brite Aqua Water Shock (part number 97116) comes in a 16 ounce bottle weighing 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this safe to use in a potable water tank?\u003c\/strong\u003e Yes, Aqua Water Shock is designed for use in food-safe water tanks and will not etch or damage metal, plastic, fiberglass, or painted surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I use Aqua Water Shock?\u003c\/strong\u003e It is designed for use after seasonal storage to freshen water tanks, or any time the water system needs a refresh from stale tastes or odors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the effect of Aqua Water Shock last, or does it wear off quickly?\u003c\/strong\u003e The formula provides a long-lasting effect, continuing to keep water tasting and smelling fresh even in extreme temperatures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is Aqua Water Shock made from?\u003c\/strong\u003e Star brite Aqua Water Shock (97116) uses a ClO2-based formula to eliminate odors and tastes from water tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between Aqua Water Shock and Aqua Water Treatment \u0026amp; Freshener?\u003c\/strong\u003e Aqua Water Shock is used to remove existing bad tastes and odors from a water tank, while Aqua Water Treatment \u0026amp; Freshener is used afterward for ongoing water quality maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces or systems is this product designed for?\u003c\/strong\u003e Aqua Water Shock is designed for use in boats, vehicles, trailers, marine engines, and fishing gear water systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill Aqua Water Shock damage my water tank or plumbing?\u003c\/strong\u003e No, the formula will not etch or damage metal, plastic, fiberglass, or painted surfaces in the water system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the package?\u003c\/strong\u003e Each package contains one 16 ounce bottle of Star brite Aqua Water Shock (part number 97116).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Aqua Water Shock remove chlorine taste from tank water?\u003c\/strong\u003e Yes, it is formulated to remove chlorine, sulphur, plastic, and metal odors and tastes from potable water tanks.\u003c\/p\u003e","brand":"Star brite","offers":[{"title":"Default Title","offer_id":49017542115547,"sku":"STR-97116","price":14.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/97116.A1_e5ab631d-0ac6-412c-b350-4e4ee27419e5.jpg?v=1784937424"},{"product_id":"star-brite-aqua-water-treatment-freshener-16-oz-potable-water-system-freshener-97016","title":"STAR BRITE Aqua Water Treatment \u0026 Freshener - 16 oz Potable Water System Freshener, 97016","description":"\u003cp\u003eSTAR BRITE Aqua Water Treatment \u0026amp; Freshener (97016) keeps drinking water tasting and smelling fresh in boats and RVs by targeting the two most common causes of foul water: chlorine and sulfur. Its water-soluble formula safely isolates and deactivates these compounds so water drawn from the tank stays clean for drinking, bathing, and making ice. The treatment is not affected by adverse temperatures, so it performs consistently year-round regardless of season.\u003c\/p\u003e\u003cp\u003eUse it every time water is added to the tank: before filling, add 1 fluid ounce of Aqua Water Treatment \u0026amp; Freshener for every 20 gallons of potable water, then fill the tank. It can be used as often as needed to maintain water quality. This product is designed for prevention and ongoing freshness rather than heavy-duty cleanup; if water already has an unpleasant odor or taste, a restorative product is needed, and if odors are strong, a full tank and system flush is recommended. Aqua Water Treatment \u0026amp; Freshener is designed for all gas engines and potable water systems and comes in a 16 fluid ounce bottle, sized to treat 320 gallons of water at the standard dosage.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e STAR BRITE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 97016\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Water Treatment Chemical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid Volume:\u003c\/strong\u003e 16 Fluid Ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Liquid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 071247970166\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreatment Ratio:\u003c\/strong\u003e 1 fluid ounce per 20 gallons of water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 1 bottle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does STAR BRITE Aqua Water Treatment \u0026amp; Freshener do?\u003c\/strong\u003e It eliminates bad taste and odors in potable water caused by chlorine and sulfur, using a water-soluble formula that isolates and deactivates both compounds to keep drinking water fresh.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much Aqua Water Treatment \u0026amp; Freshener do I use?\u003c\/strong\u003e Add 1 fluid ounce of Aqua Water Treatment \u0026amp; Freshener (97016) for every 20 gallons of potable water before filling the tank; a 16 ounce bottle treats up to 320 gallons at that ratio.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this safe for drinking water systems?\u003c\/strong\u003e Yes, STAR BRITE 97016 is designed specifically for boat and RV potable water tanks that require year-round freshness for drinking, bathing, and ice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow often should I add this to my water tank?\u003c\/strong\u003e It can be used as often as needed; for best results, add Aqua Water Treatment \u0026amp; Freshener every time fresh water is added to the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes temperature affect how well this product works?\u003c\/strong\u003e No, the formula is not affected by adverse temperatures, so 97016 performs consistently in all weather conditions and seasons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the STAR BRITE 97016 bottle?\u003c\/strong\u003e The Aqua Water Treatment \u0026amp; Freshener comes in a 16 fluid ounce bottle, weighing 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fix water that already smells or tastes bad?\u003c\/strong\u003e Aqua Water Treatment \u0026amp; Freshener is designed to maintain fresh-tasting water going forward; if water already has an unpleasant odor or taste, a restorative water treatment is needed instead, and for strong odors a full tank and system flush is recommended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat causes bad-tasting or smelly water in boats and RVs?\u003c\/strong\u003e Chlorine and sulfur are the two most common causes of smelly, bad-tasting potable water, and STAR BRITE 97016 targets both.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e Each order of STAR BRITE Aqua Water Treatment \u0026amp; Freshener includes 1 bottle containing 16 fluid ounces of liquid treatment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this be used in car or ATV fuel systems?\u003c\/strong\u003e No, 97016 is a potable water treatment for boat and RV drinking water tanks, not a fuel additive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is STAR BRITE Aqua Water Treatment \u0026amp; Freshener made?\u003c\/strong\u003e STAR BRITE has crafted its products, including the 97016 Aqua Water Treatment \u0026amp; Freshener, in the USA since 1973.\u003c\/p\u003e","brand":"Star brite","offers":[{"title":"Default Title","offer_id":49017542148315,"sku":"STR-97016","price":14.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/97016.A1_79febd60-c8ab-4c95-ae5c-710c53f92857.jpg?v=1784937424"},{"product_id":"camco-tastepure-water-filter-40043-with-flexible-hose-protector-for-rv-and-marine-drinking-water","title":"Camco TastePure Water Filter 40043 with Flexible Hose Protector for RV and Marine Drinking Water","description":"\u003cp\u003eThe Camco TastePure Water Filter (40043) is an in-line carbon filter designed to improve the taste and safety of drinking water supplied through a garden or drinking-safe hose, making it a common choice for RVs, boats, and marine fresh water systems. The filter uses a durable carbon filter with a 100 micron fiber barrier to reduce bad taste, odors, chlorine, and sediment in drinking water, while KDF media helps prevent the growth of fungus, bacteria, and mold inside the filter when it is not in use. The wide-body, in-line design streamlines water flow for high-flow performance, and the large-capacity filter is built to last an entire season of regular use.\u003c\/p\u003e\u003cp\u003eInstallation requires no assembly: connect the filter in-line to a standard garden or drinking water hose for quick setup. A flexible hose protector is included to minimize kinking at the connection point and comes with an Easy Grippe grip for effortless installation. The fittings are CSA low lead content certified and comply with California's AB1953 and Vermont Act 193 Low Lead Laws. The TastePure filter is made in the USA and is built from polypropylene (PP) construction for durability.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Camco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 40043\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014717400435\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene (PP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter Media:\u003c\/strong\u003e Carbon filter with KDF media, 100 micron fiber barrier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.1 inches deep x 3.9 inches wide x 7.6 inches high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2865 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF\/ANSI 42, NSF\/ANSI 53, NSF\/ANSI 372; CSA low lead content certified; complies with California AB1953 and Vermont Act 193 Low Lead Laws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Flexible hose protector, pump adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type:\u003c\/strong\u003e Attaches to standard garden or drinking water hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e In-line, wide body for high flow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e Large capacity, lasts an entire season\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Camco 40043 water filter remove from drinking water?\u003c\/strong\u003e The Camco TastePure Water Filter (40043) reduces bad taste, odor, chlorine, and sediment in drinking water using a carbon filter with a 100 micron fiber barrier and KDF media that also controls fungus, bacteria, and mold growth inside the filter between uses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Camco 40043 filter suitable for both RV and marine use?\u003c\/strong\u003e Yes, this in-line carbon filter connects to any standard garden or drinking water hose, which makes it suitable for RV fresh water systems, boats, and other drinking water hose connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does the Camco 40043 filter last before it needs replacing?\u003c\/strong\u003e The large-capacity filter cartridge in the Camco TastePure 40043 is designed to last an entire season of regular use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Camco TastePure filter require any tools or assembly to install?\u003c\/strong\u003e No assembly is needed. The filter connects in-line to a standard hose for quick, easy installation without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Camco 40043 Water Filter?\u003c\/strong\u003e The package includes one TastePure carbon water filter and a flexible, no-kink hose protector with an Easy Grippe grip for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Camco 40043 filter housing made from?\u003c\/strong\u003e The filter housing is made from polypropylene (PP) construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the Camco 40043 filter?\u003c\/strong\u003e The Camco TastePure 40043 measures 3.1 inches deep by 3.9 inches wide by 7.6 inches high and weighs 1.2865 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Camco 40043 filter certified for lead-free content?\u003c\/strong\u003e Yes, the fittings on the Camco 40043 are CSA low lead content certified and comply with California's AB1953 and Vermont Act 193 Low Lead Laws, and the filter is tested to NSF\/ANSI 42, NSF\/ANSI 53, and NSF\/ANSI 372 standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Camco TastePure 40043 water filter manufactured?\u003c\/strong\u003e The Camco TastePure Water Filter (40043) is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Camco 40043 filter include a hose protector?\u003c\/strong\u003e A flexible hose protector is included with the 40043 filter to minimize kinking at the hose connection and reduce strain on fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the Camco 40043 have a wide body design?\u003c\/strong\u003e The wide-body, in-line design of the Camco TastePure filter boosts water flow so the filter runs efficiently even at higher flow rates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps mold and bacteria from growing in the Camco 40043 filter when it is not in use?\u003c\/strong\u003e KDF media inside the Camco TastePure 40043 filter helps prevent the growth of fungus, bacteria, and mold when the filter sits unused.\u003c\/p\u003e","brand":"Camco","offers":[{"title":"Default Title","offer_id":49027483009243,"sku":"CAM-40043","price":29.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/40043__18891.1739460438.500.750.jpg?v=1785163589"},{"product_id":"todd-enterprises-water-tank-relocation-kit-90-2218-with-4-5-inch-access-plate-hatch","title":"Todd Enterprises Water Tank Relocation Kit 90-2218 with 4.5 Inch Access Plate Hatch","description":"\u003cp\u003eThe Todd Enterprises Water Tank Relocation Kit 90-2218 lets you reposition the fitting openings on a boat's fresh water tank so plumbing lines can be run to a new location. Rather than being locked into the tank's original factory fitting layout, this kit allows the fitting openings to be custom positioned anywhere on the tank, which is useful when a tank is being relocated, re-plumbed, or when existing fittings no longer line up with the surrounding hose runs after a refit.\u003c\/p\u003e\u003cp\u003eThe kit includes a 4.5 inch access plate hatch, giving access into the tank for installing the repositioned fittings and for ongoing inspection or maintenance once the work is complete. Installation instructions are included in the box, walking through the process of cutting the new opening and mounting the access plate and fittings. This kit is designed for fresh water tank applications; boats that also need to relocate a holding tank should use the separate Holding Tank Relocation Kit 90-2219, which includes the same 4.5 inch access plate hatch but is a distinct part number for that application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Todd Enterprises\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 90-2218\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Water System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Fresh Water Tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e 4.5 Inch Access Plate Hatch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Instructions included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 7.25 x 8 x 3.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 751536900011\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fresh water tank relocation kit; not tied to a specific boat make or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Todd Enterprises Water Tank Relocation Kit 90-2218 do?\u003c\/strong\u003e Part number 90-2218 lets you custom position new fitting openings anywhere on a fresh water tank, so plumbing can be re-run to a new location rather than staying locked into the tank's original fitting layout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 90-2218 kit include an access plate hatch?\u003c\/strong\u003e Yes, the Todd Enterprises 90-2218 kit includes a 4.5 inch access plate hatch, which provides access into the tank for installing the repositioned fittings and for later inspection or maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre installation instructions included with 90-2218?\u003c\/strong\u003e Yes, instructions are included in the box with the Todd Enterprises Water Tank Relocation Kit 90-2218 to guide the fitting relocation and access plate installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the 90-2218 relocation kit?\u003c\/strong\u003e The Todd Enterprises Water Tank Relocation Kit 90-2218 weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 90-2218 kit?\u003c\/strong\u003e The Todd Enterprises Water Tank Relocation Kit 90-2218 measures 7.25 x 8 x 3.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 90-2218 used for a fresh water tank or a holding tank?\u003c\/strong\u003e 90-2218 is the Water Tank Relocation Kit for a fresh water tank; a separate part, the Holding Tank Relocation Kit 90-2219, is used for holding tank applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between 90-2218 and 90-2219?\u003c\/strong\u003e 90-2218 is the Water Tank Relocation Kit and 90-2219 is the Holding Tank Relocation Kit; both are separate part numbers that include the same 4.5 inch access plate hatch, so the correct one should be chosen based on whether the fresh water tank or the holding tank is being relocated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the fitting openings be placed anywhere on the tank with this kit?\u003c\/strong\u003e Yes, the Todd Enterprises 90-2218 kit is designed to custom position the new fitting openings anywhere on the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Todd Enterprises 90-2218 kit?\u003c\/strong\u003e The UPC for the Todd Enterprises Water Tank Relocation Kit 90-2218 is 751536900011.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 90-2218 specific to a particular boat make or model?\u003c\/strong\u003e No, the Todd Enterprises Water Tank Relocation Kit 90-2218 is a universal fresh water tank fitting kit and is not tied to a specific boat make or model.\u003c\/p\u003e","brand":"Todd Enterprises","offers":[{"title":"Default Title","offer_id":49031309033691,"sku":"TOD-90-2218","price":53.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31ZDUEnnzOL.jpg?v=1785213088"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/97016.A1_f0da3dbf-51bf-4a47-bf5b-e124645632c2.jpg?v=1785356535","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-pumps-plumbing-sanitation-water-holding-tanks-fresh-water-tanks.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}