{"title":"Pumps, Plumbing \u0026 Sanitation","description":null,"products":[{"product_id":"sierra-shields-bilgeflex-marine-bilge-pump-discharge-hose-available-in-3-4-and-1-1-2-id-black-or-white","title":"Sierra Shields Bilgeflex Marine Bilge Pump Hose - Available in 3\/4\" and 1 1\/2\" ID, 6' to 50' Lengths","description":"\u003cp\u003eThe Sierra Shields Bilgeflex hose is a flexible, corrugated marine hose built for bilge pump discharge and general drain lines aboard a boat. It is constructed of black PVC with a flexible vinyl helix, giving it the corrugated wall that lets it bend tightly without kinking or collapsing while still standing up to abrasion. The hose resists mild chemicals and saltwater, and a clamping cuff molded in every foot of length gives installers a consistent, reinforced point to seat a hose clamp anywhere along the run.\u003c\/p\u003e\u003cp\u003eThis hose line is used primarily for bilge pump discharge, along with other onboard drain runs such as sink, shower, scupper, and livewell drains. It is not intended to be attached to a thru-hull fitting below the waterline. The line is offered in two inside diameters, 3\/4 inch and 1 1\/2 inch, each with its own bend radius and vacuum rating suited to the tighter or larger-volume routing a given drain run requires. Lengths run from a short 6 foot section up to a full 50 foot reel, and the 1 1\/2 inch size is available in black or white so the hose can match the boat's plumbing or interior.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 16-120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PVC with flexible vinyl helix\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black or White (depending on variant)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter:\u003c\/strong\u003e 3\/4 inch (19.1 mm) or 1 1\/2 inch (38.1 mm), depending on variant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Radius:\u003c\/strong\u003e 3\/4 inch (19.1 mm) on the 3\/4 inch hose; 2 inch (50.8 mm) on the 1 1\/2 inch hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVacuum Rating:\u003c\/strong\u003e 20 in. Hg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable Lengths:\u003c\/strong\u003e 6 feet, 50 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Corrugated hose with a clamping cuff every foot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Use:\u003c\/strong\u003e Bilge pump discharge and drain lines (sinks, showers, scuppers, livewells)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e Do not attach to a thru-hull fitting below the waterline\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eStart by matching the Size to the inside diameter your bilge pump outlet or drain fitting requires: 3\/4 inch or 1 1\/2 inch. Next pick the Length that covers your run, 6 feet for a short discharge line or 50 feet for longer runs or multiple installations. On the 1 1\/2 inch hose, also choose a Color, black or white, to suit the boat's existing plumbing.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat sizes does the Sierra Shields Bilgeflex hose come in?\u003c\/strong\u003e The Sierra Shields Bilgeflex hose (Sierra part number stem 16-120) is available in 3\/4 inch and 1 1\/2 inch inside diameter, with lengths of 6 feet or 50 feet depending on the size selected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I pick the right size and length for my boat?\u003c\/strong\u003e Match the Size option to the inside diameter of your bilge pump outlet or drain fitting (3\/4 inch or 1 1\/2 inch), then choose the Length that covers the run from the pump or drain to its discharge point; the Bilgeflex hose is offered in 6 foot and 50 foot lengths to cover both short and long runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hose be used below the waterline on a thru-hull fitting?\u003c\/strong\u003e No, the Bilgeflex hose should not be attached to a thru-hull fitting below the waterline; it is designed for bilge pump discharge and drain lines above that point, such as sinks, showers, scuppers, and livewells.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bilgeflex hose made of?\u003c\/strong\u003e It is made of black PVC with a flexible vinyl helix, a corrugated construction that resists mild chemicals and saltwater while staying flexible enough to route through tight spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a clamp point along the length of the hose?\u003c\/strong\u003e Yes, the Bilgeflex hose has a clamping cuff molded in every foot of its length, so a hose clamp can be seated securely at any point along the run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bend radius of the 3\/4 inch versus the 1 1\/2 inch hose?\u003c\/strong\u003e The 3\/4 inch Bilgeflex hose has a bend radius of 3\/4 inch (19.1 mm), while the 1 1\/2 inch hose has a bend radius of 2 inch (50.8 mm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat vacuum rating does this hose carry?\u003c\/strong\u003e The Sierra Shields Bilgeflex hose line is rated to 20 in. Hg of vacuum across both the 3\/4 inch and 1 1\/2 inch sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1 1\/2 inch hose come in a color other than black?\u003c\/strong\u003e Yes, the 1 1\/2 inch Bilgeflex hose is available in both black and white, letting it match the existing plumbing or interior color scheme.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this hose typically used for on a boat?\u003c\/strong\u003e It is used primarily for bilge pump discharge, as well as other onboard drain lines including sinks, showers, scuppers, and livewells.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 6 foot length only available in one size?\u003c\/strong\u003e Based on the available options, the 6 foot length of the Bilgeflex hose is offered in the 3\/4 inch inside diameter in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the longest Bilgeflex hose option?\u003c\/strong\u003e The longest option in this Sierra Shields Bilgeflex line is a 50 foot length, available in both the 3\/4 inch and 1 1\/2 inch inside diameters.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"3\/4\" \/ 6' Polypac \/ Black","offer_id":48988023029979,"sku":"SIE-116-120-0341B","price":11.55,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ 50' Carton \/ Black","offer_id":48988023062747,"sku":"SIE-16-120-0346B","price":236.18,"currency_code":"USD","in_stock":true},{"title":"1 1\/2\" \/ 50' Carton \/ Black","offer_id":48988023095515,"sku":"SIE-16-120-1126B","price":162.08,"currency_code":"USD","in_stock":true},{"title":"1 1\/2\" \/ 50' Carton \/ White","offer_id":48988023128283,"sku":"SIE-16-120-1126W","price":267.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-116-120-0341B__03356.1722509992.500.750.jpg?v=1785188140"},{"product_id":"sierra-shields-vinylvent-402-marine-blower-hose-available-in-3-and-4-id-10-ft","title":"Sierra Shields Vinylvent Marine Blower Hose - Available in 3 Inch and 4 Inch ID, 10 Foot Length","description":"\u003cp\u003eThe Sierra Shields Vinylvent Blower Hose is a flexible marine ventilation hose used primarily for venting bilge fumes and for blower\/ducting runs in engine compartments. The hose is constructed of black PVC (polyvinyl chloride) supported internally by an anodized wire helix, which keeps the hose round and open while allowing it to flex and route through tight compartments. It is resistant to UV and ozone exposure, making it suitable for the marine environment where hoses are subjected to sun, heat, and engine-bay conditions over time.\u003c\/p\u003e\u003cp\u003eThis hose line is sold in 10 foot lengths and is available in two inside diameters to match different blower and ducting hookups. The hose carries the Sierra part-number stem 16-402 and is a direct replacement or upgrade hose for boats that need to route ventilation ducting between the blower and the bilge or engine compartment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 16-402\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyvinyl Chloride (PVC) with anodized wire helix support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter Range:\u003c\/strong\u003e 3 inch to 4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter Range:\u003c\/strong\u003e 3 1\/8 inch to 4 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Use:\u003c\/strong\u003e Venting bilge fumes and blower ducting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV and Ozone Resistance:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.65 pounds (3 inch) to 0.75 pounds (4 inch)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eChoose the hose that matches the inside diameter of your existing blower fitting or ducting run: the 3 inch ID hose (outside diameter 3 1\/8 inch) or the 4 inch ID hose (outside diameter 4 1\/8 inch). Both sizes ship in 10 foot lengths and are black in color. Measure the inside diameter of the fitting or the hose being replaced before ordering, since the 3 inch and 4 inch versions are not interchangeable.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat sizes does the Sierra Shields Vinylvent blower hose come in?\u003c\/strong\u003e The Sierra 16-402 Vinylvent blower hose is available in a 3 inch inside diameter and a 4 inch inside diameter, both in 10 foot lengths.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this hose used for?\u003c\/strong\u003e It is used primarily for venting bilge fumes and for blower ducting runs in a boat's engine compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the hose resistant to UV and ozone?\u003c\/strong\u003e Yes, the Vinylvent blower hose is resistant to both UV exposure and ozone, which suits it for use in marine engine compartments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the hose made of?\u003c\/strong\u003e The hose is black PVC (polyvinyl chloride) supported by an anodized wire helix that keeps it round while allowing it to flex.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is each hose?\u003c\/strong\u003e Each Sierra 16-402 Vinylvent hose, in either the 3 inch or 4 inch diameter, is sold in a 10 foot length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outside diameter compared to the inside diameter?\u003c\/strong\u003e The 3 inch ID hose has an outside diameter of 3 1\/8 inch, and the 4 inch ID hose has an outside diameter of 4 1\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the hose weigh?\u003c\/strong\u003e The 3 inch diameter Vinylvent hose weighs 0.65 pounds and the 4 inch diameter version weighs 0.75 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the hose?\u003c\/strong\u003e Both the 3 inch and 4 inch versions of this Sierra Vinylvent blower hose are black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hose be used for engine compartment ventilation?\u003c\/strong\u003e Yes, the Shields Vinylvent hose is designed for venting bilge fumes and ducting airflow in and around the engine compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I pick the right size for my boat?\u003c\/strong\u003e Measure the inside diameter of the existing blower fitting or hose being replaced; choose the 3 inch ID version or the 4 inch ID version of the 16-402 hose to match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part?\u003c\/strong\u003e Yes, this is a Sierra Shields Vinylvent blower hose under part-number stem 16-402, not a generic substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the hose collapse or kink easily when routed through tight spaces?\u003c\/strong\u003e No, the anodized wire helix inside the PVC hose wall keeps the 16-402 Vinylvent hose open and round even when flexed around bends.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"3\" ID x 10'","offer_id":48988027388123,"sku":"SIE-116-402-3003-1","price":10.95,"currency_code":"USD","in_stock":true},{"title":"4\" ID x 10'","offer_id":48988027420891,"sku":"SIE-116-402-4003-1","price":14.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sie-116-402-3003.1__32304.1739463263.500.750.jpg?v=1785188899"},{"product_id":"sierra-18-710-marine-grade-316-stainless-steel-worm-gear-hose-clamps-available-in-sae-010-to-104-9-16-to-7","title":"Sierra Shields Stainless Steel Worm Gear Hose Clamps - Available in 9\/16\" to 7\" Clamping Diameter","description":"\u003cp\u003eSierra's Shields worm gear hose clamps are marine grade clamps built to secure hoses, wire, and cords aboard boats and in other demanding environments. Every clamp in the 18-710 line is manufactured from 316 stainless steel to resist the corrosion that saltwater and engine-bay moisture cause in lesser hardware, and each one uses a worm gear (screw and band) mechanism so the clamp can be tightened down to the exact diameter of the hose or bundle it is securing. This line is sold individually packaged, with each clamp's part number ending in the -2 suffix; buyers who do not need individual packaging can order the same clamp under the base part number without the suffix.\u003c\/p\u003e\u003cp\u003eBecause hose and fitting diameters vary widely across engines, drives, and plumbing runs, this clamp is offered across eight clamping ranges, from 9\/16 inch up to 7 inches, identified by their SAE standard number. Selecting the correct size means matching the outside diameter of the hose (with the clamp in place) to the range printed on the part. Each clamp carries Sierra's standard parts warranty and is designed to meet or exceed the performance of the original hardware it replaces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-710\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Worm Gear Hose Clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Individually packaged (-2 suffix)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (each):\u003c\/strong\u003e 0.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items (each):\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAE Standard Numbers Covered:\u003c\/strong\u003e 010, 012, 016, 020, 032, 048, 072, 104\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamping Diameter Range (full line):\u003c\/strong\u003e 9\/16 inch to 7 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eChoose the Size option that matches the outside diameter of the hose or bundle to be clamped: 9\/16\" to 1-1\/16\" (SAE 010), 9\/16\" to 1-1\/4\" (SAE 012), 1-1\/16\" to 1-1\/2\" (SAE 016), 3\/4\" to 1-3\/4\" (SAE 020), 1-9\/16\" to 2-1\/2\" (SAE 032), 2-9\/16\" to 3-1\/2\" (SAE 048), 3\" to 5\" (SAE 072), or 5\" to 7\" (SAE 104). Measure the hose's outside diameter and pick the range it falls within; each clamp will tighten across its full listed range.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat sizes are available in the Sierra Shields 18-710 hose clamp line?\u003c\/strong\u003e The line spans eight clamping ranges: 9\/16\" to 1-1\/16\" (SAE 010), 9\/16\" to 1-1\/4\" (SAE 012), 1-1\/16\" to 1-1\/2\" (SAE 016), 3\/4\" to 1-3\/4\" (SAE 020), 1-9\/16\" to 2-1\/2\" (SAE 032), 2-9\/16\" to 3-1\/2\" (SAE 048), 3\" to 5\" (SAE 072), and 5\" to 7\" (SAE 104).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know which size clamp to order?\u003c\/strong\u003e Measure the outside diameter of the hose or bundle you need to secure and pick the Sierra 18-710 clamp whose listed range covers that measurement; each SAE size (010 through 104) tightens across its full stated range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are these hose clamps made from?\u003c\/strong\u003e Every clamp in the Sierra 18-710 line is manufactured from 316 stainless steel, chosen for its resistance to corrosion in marine and engine-bay environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these clamps individually packaged?\u003c\/strong\u003e Yes, part numbers in this line carry a -2 suffix, which denotes individual packaging for each clamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I get this clamp without individual packaging?\u003c\/strong\u003e Yes, the same Sierra clamp is available under the base part number without the -2 suffix for buyers who do not need individual packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a worm gear hose clamp used for?\u003c\/strong\u003e A worm gear hose clamp, like the Sierra 18-710 series, uses a screw-and-band mechanism to clamp hoses, wire, or cords securely in place, and is common in marine plumbing and engine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does one of these clamps weigh?\u003c\/strong\u003e Each Sierra 18-710 series clamp weighs 0.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-710 clamp genuine Sierra brand or aftermarket?\u003c\/strong\u003e It is a genuine Sierra brand part, manufactured to meet or exceed the performance of the original hardware it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SAE number on the clamp mean?\u003c\/strong\u003e The SAE standard number (010, 012, 016, 020, 032, 048, 072, or 104) identifies the specific clamping diameter range for that size within the Sierra 18-710 line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan these clamps be used for anything besides hoses?\u003c\/strong\u003e Yes, in addition to hoses the Sierra 18-710 clamps can be used for clamping wire, cords, and similar applications requiring adjustable, secure clamping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many clamps come in one package?\u003c\/strong\u003e Each Sierra 18-710 series package contains one clamp.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"SAE 010 (9\/16\" to 1-1\/16\")","offer_id":48988029944027,"sku":"SIE-18-710-10-2","price":3.37,"currency_code":"USD","in_stock":true},{"title":"SAE 104 (5\" to 7\")","offer_id":48988029976795,"sku":"SIE-18-710-104-2","price":8.41,"currency_code":"USD","in_stock":false},{"title":"SAE 012 (9\/16\" to 1-1\/4\")","offer_id":48988030009563,"sku":"SIE-18-710-12-2","price":3.37,"currency_code":"USD","in_stock":true},{"title":"SAE 016 (1-1\/16\" to 1-1\/2\")","offer_id":48988030042331,"sku":"SIE-18-710-16-2","price":3.37,"currency_code":"USD","in_stock":true},{"title":"SAE 020 (3\/4\" to 1-3\/4\")","offer_id":48988030075099,"sku":"SIE-18-710-20-2","price":3.37,"currency_code":"USD","in_stock":true},{"title":"SAE 032 (1-9\/16\" to 2-1\/2\")","offer_id":48988030107867,"sku":"SIE-18-710-32-2","price":3.75,"currency_code":"USD","in_stock":true},{"title":"SAE 048 (2-9\/16\" to 3-1\/2\")","offer_id":48988030140635,"sku":"SIE-18-710-48-2","price":4.0,"currency_code":"USD","in_stock":true},{"title":"SAE 072 (3\" to 5\")","offer_id":48988030173403,"sku":"SIE-18-710-72-2","price":4.67,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7316_lg__78166.1674845607.500.750.jpg?v=1785188666"},{"product_id":"marine-hose-barb-fitting-3-4in-14-npt-x-1in-hose-corrosion-resistant-brass-replaces-mercruiser-22-807155-glm-13984-sierra-18-4461-cooling-system","title":"Sierra 18-4461 Brass Hose Barb Fitting, 3\/4 Inch NPT x 1 Inch Hose, Replaces Mercruiser 22-807155, GLM 13984","description":"\u003cp\u003eThe Sierra 18-4461 is a corrosion resistant brass hose barb fitting sized 3\/4 inch - 14 NPT threads to a 1 inch hose barb. It is used to connect exhaust manifold plumbing and cooling hose runs, and appears in the Chrysler inboard exhaust manifold parts range alongside related mounting kits, manifold gaskets, spacers, and elbows. The fitting is machined from brass for corrosion resistance in a marine environment, making it suitable for saltwater and freshwater engine cooling and exhaust water circuits where a threaded NPT connection needs to step down to hose.\u003c\/p\u003e\u003cp\u003eThis part is a direct fit replacement for several OEM hose barb numbers used on Mercruiser and GLM applications, letting an installer swap in a Sierra part without hunting down the original manufacturer's fitting. Each Sierra part is built to meet or exceed the original equipment part it replaces. At 0.17 pounds, it is a light, compact brass component intended to thread directly into an existing NPT port.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-4461\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hose Barb Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Machined, corrosion resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/4 inch - 14 NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Barb Size:\u003c\/strong\u003e 1 inch hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1 x 4 x 5.12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.17 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Category:\u003c\/strong\u003e Chrysler Inboard Exhaust Manifolds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e GLM 13984, Mercruiser 22-807155, 22-866725, 22-863804, 22-45084\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eListed within the Chrysler inboard exhaust manifold parts range as a 3\/4 inch NPT to 1 inch hose barb fitting.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eGLM 13984; Mercruiser 22-807155, 22-866725, 22-863804, 22-45084.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Sierra 18-4461 fit?\u003c\/strong\u003e The Sierra 18-4461 has a 3\/4 inch - 14 NPT thread on one end and a 1 inch hose barb on the other, so it steps a threaded NPT port down to a 1 inch hose connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-4461 interchangeable with Mercruiser fittings?\u003c\/strong\u003e Yes, the Sierra 18-4461 is interchangeable with Mercruiser 22-807155, 22-866725, 22-863804, and 22-45084, as well as GLM 13984.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-4461 hose barb made of?\u003c\/strong\u003e It is made of brass with a machined finish, chosen for corrosion resistance in marine cooling and exhaust water circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-4461 weigh?\u003c\/strong\u003e The Sierra 18-4461 brass hose barb weighs 0.17 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-4461 fitting?\u003c\/strong\u003e The Sierra 18-4461 measures 1 x 4 x 5.12 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-4461 work in saltwater applications?\u003c\/strong\u003e Brass construction on the Sierra 18-4461 provides corrosion resistance, making it suitable for marine saltwater and freshwater exhaust and cooling hose connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 18-4461 and the 18-8215 hose barb?\u003c\/strong\u003e Both are corrosion resistant brass 3\/4 inch - 14 NPT fittings, but the 18-4461 barbs to a 1 inch hose while the 18-8215 barbs to a 3\/4 inch hose - they are different SKUs for different hose sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-4461 an OEM part or an aftermarket replacement?\u003c\/strong\u003e The 18-4461 is a Sierra aftermarket part built to meet or exceed the original equipment fittings it replaces, including Mercruiser 22-807155 and GLM 13984.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-4461?\u003c\/strong\u003e You receive one Sierra 18-4461 brass hose barb fitting; no additional mounting hardware or gaskets are included with this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type does the 18-4461 use?\u003c\/strong\u003e The Sierra 18-4461 uses a 3\/4 inch NPT (National Pipe Thread) connection on the threaded end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat application is the 18-4461 used on?\u003c\/strong\u003e The Sierra 18-4461 is listed under Chrysler inboard exhaust manifold parts as a hose barb fitting for exhaust and cooling hose connections.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988198568155,"sku":"SIE-18-4461","price":11.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-4461_lg__60979.1558126801.500.750.jpg?v=1785188317"},{"product_id":"sierra-18-8074-brass-fuel-hose-barb-fitting-3-8-hose-x-1-4-npt-mpn-18-8074","title":"Sierra Hose Barb 18-8074, 3\/8 Inch Brass Fitting for Marine Fuel Lines","description":"\u003cp\u003eThe Sierra 18-8074 is a 3\/8 inch hose barb fitting used as a component in marine fuel line assemblies. It is machined from brass with a gold finish for corrosion resistance in the marine environment. This hose barb is sold separately, meaning it is not bundled with a primer bulb or a complete fuel line hose; it is intended for buyers building or repairing a fuel line assembly who need the barb fitting on its own.\u003c\/p\u003e\u003cp\u003eSierra engineers its parts to meet the demands of high horsepower marine engines and to hold up under harsh marine conditions. Sierra states that its products meet or exceed the original equipment part they replace, and the company supplies OEM engine manufacturers and boat builders with parts on a daily basis. The 18-8074 carries the Sierra part number molded or stamped into the fitting for easy identification when ordering replacements.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8074\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hose Barb Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Gold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 28 inches L x 2 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282368913\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold Separately:\u003c\/strong\u003e Yes, hose barb only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis hose barb is a 3\/8 inch fitting used in marine fuel line assemblies; check your existing fuel line assembly's hose barb size before ordering.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part number.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sierra 18-8074 hose barb?\u003c\/strong\u003e The Sierra 18-8074 is a 3\/8 inch hose barb fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-8074 come with a fuel line or primer bulb?\u003c\/strong\u003e No, the Sierra 18-8074 is sold separately as just the hose barb fitting, without a fuel line hose or primer bulb included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-8074 hose barb made of?\u003c\/strong\u003e It is made of brass, which resists corrosion in marine fuel system use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does the 18-8074 have?\u003c\/strong\u003e The Sierra 18-8074 hose barb has a gold finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-8074 weigh?\u003c\/strong\u003e The Sierra 18-8074 hose barb weighs 0.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-8074?\u003c\/strong\u003e The UPC for the Sierra 18-8074 hose barb is 808282368913.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-8074 used for?\u003c\/strong\u003e It is a hose barb fitting used as a connection point in marine fuel line assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8074 genuine Sierra or an aftermarket copy?\u003c\/strong\u003e It is a genuine Sierra part, part number 18-8074, and Sierra states its products meet or exceed the original equipment part they replace.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-8074 hose barb?\u003c\/strong\u003e The listed product dimensions for the Sierra 18-8074 are 28 inches long by 2 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8074 hose barb interchangeable with other sizes?\u003c\/strong\u003e The 18-8074 is specifically a 3\/8 inch barb; confirm your fuel line assembly requires a 3\/8 inch hose barb before ordering.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432597211,"sku":"SIE-18-8074","price":5.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8074_lg__95432.1558131173.500.750.jpg?v=1785188527"},{"product_id":"sierra-18-8055-brass-hose-barb-fitting-5-16-barb-x-1-4-npt-male-replaces-mercury-22-63187-omc-173311-yamaha-aba-fline-ba-rb","title":"Sierra 18-8055 Brass Hose Barb - Replaces Mercury 22-63187, 5\/16 Inch Barb x 1\/4 Inch NPT","description":"\u003cp\u003eThe Sierra 18-8055 is a brass hose barb fitting used to connect fuel line to a primer bulb or fuel connection on outboard motor fuel systems. It features a 5\/16 inch barb end for the hose side and a 1\/4 inch NPT male thread on the fitting side, allowing a secure, leak-resistant connection between a barbed fuel hose and a threaded fuel component. The fitting is machined from brass with a gold-tone finish for corrosion resistance in a marine fuel-system environment.\u003c\/p\u003e\u003cp\u003eThis part is a direct equivalent to Mercury Marine part number 22-63187, making it a straightforward replacement when an original fitting has worn, cracked, or stripped threads. It is sold as a single hose barb fitting measuring 5 x 3 x 1 inches and weighing 0.07 pounds, and is built to Sierra's standard marine parts quality.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8055\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Size:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Barb, Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5 x 3 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Mercury Marine applications using the 22-63187 fuel fitting.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury Marine 22-63187\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-8055 hose barb replace?\u003c\/strong\u003e It is a direct equivalent to Mercury Marine part number 22-63187, so it can be used wherever that original fitting is called for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose and thread does this fitting use?\u003c\/strong\u003e The 18-8055 has a 5\/16 inch barb end for the fuel hose and a 1\/4 inch NPT male thread on the opposite end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 18-8055 fitting made of?\u003c\/strong\u003e It is machined brass with a gold-tone finish, chosen for corrosion resistance in marine fuel systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8055 a male or female connector?\u003c\/strong\u003e The NPT thread end of the Sierra 18-8055 is male.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-8055 hose barb weigh?\u003c\/strong\u003e It weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this hose barb?\u003c\/strong\u003e The 18-8055 measures 5 x 3 x 1 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fittings come in a package?\u003c\/strong\u003e The Sierra 18-8055 is sold as a single hose barb fitting, unit count of 1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part or a generic aftermarket fitting?\u003c\/strong\u003e Part number 18-8055 is a genuine Sierra-manufactured fitting, engineered as an equivalent to the Mercury Marine 22-63187 rather than a generic substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this fitting typically used for?\u003c\/strong\u003e It is used to connect a barbed fuel hose to a threaded fuel line component, such as a primer bulb connection, on an outboard fuel system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 18-8055 different from the 18-8054?\u003c\/strong\u003e The 18-8055 has a 1\/4 inch NPT thread, while the related 18-8054 uses a 1\/8 inch NPT thread; both share the same 5\/16 inch barb size.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432629979,"sku":"SIE-18-8055","price":6.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8055_lg__46913.1558133133.500.750.jpg?v=1785188322"},{"product_id":"sierra-18-8108-marine-fuel-hose-barb-fitting-3-8-barb-x-3-8-npt-male-connector","title":"Sierra 18-8108 Marine Fuel Hose Barb Fitting, 3\/8 Inch x 3\/8 Inch Male","description":"\u003cp\u003eThe Sierra 18-8108 is a machined male hose barb fitting sized 3\/8 inch by 3\/8 inch, built for marine fuel system plumbing where a secure, leak-resistant connection between fuel hose and a threaded fitting or fuel component is required. It has a male connection type with a 3\/8 inch (9.53mm) barb on one end and a 3\/8 inch (9.53mm) NPT thread on the other, letting it join standard 3\/8 inch marine fuel hose to a 3\/8 inch NPT port. The barbed end is designed to grip hose securely when paired with the correct hose clamp, resisting slippage and fuel leaks under engine vibration and pressure changes typical of a marine fuel system.\u003c\/p\u003e\u003cp\u003eSierra engineers its marine parts to meet or exceed the performance of the original equipment they replace, and this hose barb is manufactured to the same standard, making it a dependable choice for fuel line repairs, replacements, or new fuel system builds on boats. Its compact size (0.39 x 0.39 x 0.39 inches) and light weight make it easy to fit into tight engine compartments and existing fuel line routing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8108\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hose Barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Size:\u003c\/strong\u003e 3\/8 inch (9.53mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type:\u003c\/strong\u003e Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNPT Size:\u003c\/strong\u003e 3\/8 inch (9.53mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282125615\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sierra 18-8108 hose barb?\u003c\/strong\u003e The Sierra 18-8108 is a 3\/8 inch by 3\/8 inch fitting, with a 3\/8 inch (9.53mm) barb end and a 3\/8 inch (9.53mm) NPT male thread on the other end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8108 a male or female fitting?\u003c\/strong\u003e It is a male connection type fitting, designed to thread into a female NPT port while the opposite end accepts hose over its barbed profile.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does this barb fit?\u003c\/strong\u003e The barbed end of the Sierra 18-8108 is sized for 3\/8 inch marine fuel hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material or finish is the Sierra 18-8108 hose barb?\u003c\/strong\u003e The Sierra 18-8108 has a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-8108 weigh?\u003c\/strong\u003e This hose barb weighs 0.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-8108 fitting?\u003c\/strong\u003e Product dimensions are 0.39 x 0.39 x 0.39 inches, a compact size intended for tight engine compartment fuel line routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a hose clamp with the Sierra 18-8108?\u003c\/strong\u003e Yes, a hose clamp should be used over the barbed end to secure the fuel hose and prevent slippage or leaks, since the fitting itself is a barb, not a clamped or threaded hose connector on that end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8108 genuine Sierra or aftermarket?\u003c\/strong\u003e The 18-8108 is manufactured by Sierra and built to meet or exceed the performance of the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Sierra 18-8108 be used for fuel system repairs?\u003c\/strong\u003e Yes, this 3\/8 inch by 3\/8 inch male hose barb is intended for marine fuel system plumbing, including fuel line repairs and replacements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat NPT thread size does the 18-8108 use?\u003c\/strong\u003e The threaded end of the Sierra 18-8108 is a 3\/8 inch (9.53mm) NPT male thread.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988432924891,"sku":"SIE-18-8108","price":5.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-8108__93331.1722346667.500.750.jpg?v=1785189103"},{"product_id":"sierra-18-8109-hose-barb-fitting-5-16-in-barb-x-3-8-in-npt-male-marine-fuel-water-line-connector","title":"Sierra Hose Barb 5\/16 Inch Barb x 3\/8 Inch NPT Male, 18-8109","description":"\u003cp\u003eThe Sierra 18-8109 is a hose barb fitting built to connect marine hose to a 3\/8 inch male NPT threaded port. One end of the fitting is a 5\/16 inch barb designed to grip hose securely under vibration and pressure, while the opposite end threads directly into a fitting or component using standard 3\/8 inch NPT male threads. It is manufactured with a machined finish for a consistent, leak-resistant seal at both the hose connection and the threaded joint.\u003c\/p\u003e\u003cp\u003eThis fitting is used wherever a boat's plumbing, fuel, or cooling system needs to transition from hose to a threaded NPT port, and it is sized to work with 5\/16 inch inside diameter hose. Sierra engineers its parts to meet or exceed the performance of the original equipment they replace, and the company supplies OEM engine manufacturers and boat builders with parts on a daily basis, so the 18-8109 is built to the same demands as factory-installed hardware. Its compact dimensions and single-piece construction make it a straightforward, drop-in solution for hose-to-threaded-port connections in the engine compartment or fuel and cooling lines.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8109\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Size:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/8 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type:\u003c\/strong\u003e Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal hose barb fitting sized for 5\/16 inch hose and 3\/8 inch NPT male threaded ports; not restricted to a specific engine or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Sierra 18-8109 fit?\u003c\/strong\u003e The Sierra 18-8109 has a 5\/16 inch barb end, so it is sized for hose with a 5\/16 inch inside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread does the other end of the 18-8109 use?\u003c\/strong\u003e The opposite end of the 18-8109 is a 3\/8 inch male NPT thread, allowing it to screw directly into a threaded port or fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-8109 a straight fitting or an elbow?\u003c\/strong\u003e The 18-8109 is a straight hose barb, transitioning in a single line from the 5\/16 inch barb to the 3\/8 inch NPT male thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 18-8109 made from and how is it finished?\u003c\/strong\u003e The 18-8109 has a machined exterior finish, giving it precise, consistent threads and a tight seal at both connection points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-8109 weigh?\u003c\/strong\u003e The 18-8109 weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-8109 hose barb?\u003c\/strong\u003e The Sierra 18-8109 measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-8109 come with any other hardware?\u003c\/strong\u003e The 18-8109 ships as a single hose barb fitting with no additional hardware included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-8109 fit any boat with a 3\/8 inch NPT port?\u003c\/strong\u003e Yes, the 18-8109 is a universal fitting sized to any 3\/8 inch NPT male threaded port paired with 5\/16 inch hose, rather than being limited to one specific engine or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra's 18-8109 built to OEM standards?\u003c\/strong\u003e Sierra engineers the 18-8109 to meet or exceed the performance of the original equipment part it replaces, using the same quality standards Sierra supplies to OEM engine manufacturers and boat builders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-8109 be used on fuel lines as well as cooling lines?\u003c\/strong\u003e The 18-8109 hose barb is a general-purpose fitting for connecting 5\/16 inch hose to a 3\/8 inch NPT male port, suitable wherever that hose-to-thread transition is needed on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many 18-8109 fittings come in a package?\u003c\/strong\u003e The Sierra 18-8109 is sold as a single unit, one hose barb per package.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988433187035,"sku":"SIE-18-8109","price":5.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sie-18-8109_lg__97950.1637356383.500.750.jpg?v=1785188951"},{"product_id":"sierra-18-9093-sani-system-cleaner-ready-to-use-1-gallon-usda-bio-based-marine-holding-tank-sanitation-cleaner","title":"Sierra Sani System Cleaner, Ready to Use, 1 Gallon, 18-9093","description":"\u003cp\u003eSierra Sani System Cleaner is a ready to use formula designed to remove uric scale, calcium carbonate, and other mineral solids from marine sanitation systems. Buildup of these deposits inside heads, holding tanks, hoses, and fittings is a common cause of clogs, odors, and reduced flow on boats, and this cleaner is formulated to break that buildup down and help keep the system working at its best. Because it is supplied ready to use, it can be poured directly into the system without the need to measure and dilute a concentrate, making routine maintenance straightforward for boat owners.\u003c\/p\u003e\u003cp\u003ePart number 18-9093 is packaged in a 1 gallon container. Sierra also offers this same cleaner as a concentrate under a separate part number for owners who prefer to dilute their own working solution; 18-9093 is the ready to use version and is a distinct product from that concentrate SKU.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-9093\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Sani System Cleaner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormula:\u003c\/strong\u003e Ready to Use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1 Gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume:\u003c\/strong\u003e 128 Fluid Ounces (3.79 Liters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.77 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282362027\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra Sani System Cleaner 18-9093 remove?\u003c\/strong\u003e It removes uric scale, calcium carbonate, and other solids that build up inside marine sanitation systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 18-9093 ready to use or a concentrate?\u003c\/strong\u003e 18-9093 is the ready to use version, supplied in a 1 gallon container that can be used directly without mixing or diluting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sierra make a concentrate version of this cleaner?\u003c\/strong\u003e Yes, Sierra also offers this cleaner as a concentrate under a different part number, which is a separate product from the ready to use 18-9093.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a container of 18-9093 hold?\u003c\/strong\u003e Each container holds 1 gallon, equal to 128 fluid ounces (3.79 liters), of ready to use cleaner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is 18-9093 used for on a boat?\u003c\/strong\u003e It is used to clean marine sanitation systems, helping keep heads, holding tanks, and related plumbing free of mineral scale buildup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-9093 cleaner weigh?\u003c\/strong\u003e A 1 gallon container of Sierra Sani System Cleaner, part number 18-9093, weighs 7.77 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for Sierra 18-9093?\u003c\/strong\u003e The UPC for the Sierra Sani System Cleaner, part number 18-9093, is 808282362027.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many items come in one order of 18-9093?\u003c\/strong\u003e One order of 18-9093 includes a single 1 gallon container of the ready to use cleaner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of container does 18-9093 come in?\u003c\/strong\u003e The Sierra Sani System Cleaner 18-9093 is packaged in a can-type container.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-9093 formulated to fight odors from sanitation system buildup?\u003c\/strong\u003e Yes, by removing uric scale and calcium carbonate deposits, 18-9093 helps address a common source of odor in marine sanitation systems.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988436005083,"sku":"SIE-18-9093","price":119.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-9093__06668.1722504906.500.750.jpg?v=1785188327"},{"product_id":"oetiker-stepless-ear-clamp-35-64-in-14mm-replaces-oem-oetiker-16700012-omc-346931-stainless-steel-pkg-of-10","title":"Sierra Oetiker Clamp 18-9132-9, 9\/16 Inch (14.5mm), Stainless Steel, Pack of 10, Replaces Oetiker 16700013 OMC 346785","description":"\u003cp\u003eThe Sierra 18-9132-9 is a stainless steel Oetiker-style clamp sized for 9\/16 inch (14.5mm) nominal hose diameter, sold as a pack of 10. This clamp style uses a single-ear pinch design rather than a screw-adjustable band, giving a consistent, uniform clamping force around the hose circumference with no protruding screw head to snag on surrounding components. Stainless steel construction resists corrosion in the wet, salt-exposed environments typical of marine engine compartments and bilges, making this clamp suitable for fuel lines, coolant lines, and other small-diameter hose connections where a low-profile, vibration-resistant seal is needed. Because the fit is universal to the stated hose diameter rather than tied to one engine or drive model, the 18-9132-9 works across a wide range of applications calling for a 9\/16 inch (14.5mm) Oetiker-type clamp. Each clamp measures 0.39 x 0.39 x 0.39 inches and weighs a fraction of a pound, so a full pack of 10 adds negligible weight to a parts inventory or toolbox. This part directly corresponds to the OEM Oetiker and OMC clamp numbers listed below, so it can be used as a like-for-like replacement when those original clamps need to be swapped out.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-9132-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Inside Diameter:\u003c\/strong\u003e 9\/16 inch (14.5mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10 clamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e Oetiker 16700013, OMC 346785\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for hose connections with a 9\/16 inch (14.5mm) nominal inside diameter.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOetiker 16700013\u003c\/li\u003e\n\u003cli\u003eOMC 346785\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Sierra 18-9132-9 clamp fit?\u003c\/strong\u003e The 18-9132-9 is sized for a 9\/16 inch (14.5mm) nominal inside diameter hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many clamps come in a pack?\u003c\/strong\u003e Each package of the Sierra 18-9132-9 contains 10 clamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-9132-9 clamp made from?\u003c\/strong\u003e It is made from stainless steel, chosen for corrosion resistance in wet and salt-exposed environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-9132-9 an OEM part or an aftermarket replacement?\u003c\/strong\u003e It is a Sierra-manufactured clamp that serves as a direct replacement for the equivalent Oetiker and OMC clamps, cross-referencing to Oetiker 16700013 and OMC 346785.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does this clamp replace?\u003c\/strong\u003e The 18-9132-9 replaces Oetiker 16700013 and OMC 346785.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-9132-9 fit a specific engine or boat model?\u003c\/strong\u003e It is a universal-fit clamp sized to a 9\/16 inch (14.5mm) hose diameter rather than being tied to a specific engine or boat model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of clamp design is the 18-9132-9?\u003c\/strong\u003e It uses an Oetiker-style single-ear pinch design that provides uniform clamping pressure without a protruding screw head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of a single 18-9132-9 clamp?\u003c\/strong\u003e Each clamp measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a pack of 18-9132-9 clamps weigh?\u003c\/strong\u003e A pack of the Sierra 18-9132-9 clamps weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is the 18-9132-9 clamp suited for?\u003c\/strong\u003e Its 9\/16 inch (14.5mm) sizing and stainless steel construction make it suitable for small-diameter fuel line, coolant line, and similar hose connections in marine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-9132-9 clamp?\u003c\/strong\u003e The clamp is white in color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-9132-9 be re-tightened after installation like a screw clamp?\u003c\/strong\u003e No, the Oetiker-style single-ear design of the 18-9132-9 is pinched closed during installation and is not designed to be re-adjusted like a screw-band clamp.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988436463835,"sku":"SIE-18-9132-9","price":13.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2__43133.1770239764.500.750.jpg?v=1785188722"},{"product_id":"sierra-18-99546-check-valve-assembly-for-marine-oil-change-pumps","title":"Sierra Check Valve Assembly 18-99546, Cross Reference 551-33cv, for Marine Oil Change Pumps","description":"\u003cp\u003eThe Sierra 18-99546 Check Valve Assembly is a replacement check valve built for marine oil change pumps, the type used to extract used engine oil from a boat's crankcase during routine oil changes. The check valve is the internal component that allows oil to flow in one direction through the pump while preventing backflow, so the pump can draw oil out of the engine efficiently on each stroke or cycle. A worn or cracked check valve is a common cause of a marine oil change pump losing suction or failing to draw oil at all, and replacing the valve assembly restores proper pump function without having to replace the entire pump. This assembly is sold as a single complete unit, so installation is a straightforward swap of the worn valve for a new one. It is cross-referenced to the CDI Electronics 551-33cv, making it a suitable replacement for pumps that originally used that part. Boat owners performing their own annual oil changes, or servicing a pump that has started losing prime, can use this valve assembly to get their existing oil change pump back into working order rather than purchasing a new pump outright.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99546\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Check Valve Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Marine Oil Change Pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 736983856203\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross Reference:\u003c\/strong\u003e 551-33cv (CDI Electronics)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e551-33cv\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-99546 Check Valve Assembly used for?\u003c\/strong\u003e It is a check valve assembly for marine oil change pumps, controlling one-way oil flow so the pump can draw used oil out of an engine's crankcase during an oil change.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-99546 compatible with CDI Electronics 551-33cv pumps?\u003c\/strong\u003e Yes, the 18-99546 is cross-referenced to the CDI Electronics 551-33cv, so it can be used as a replacement valve assembly on pumps that call for that part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-99546 check valve assembly weigh?\u003c\/strong\u003e The Sierra 18-99546 Check Valve Assembly weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many check valves come in one 18-99546 package?\u003c\/strong\u003e One complete check valve assembly is included per unit, ready to install as a direct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would my marine oil change pump lose suction?\u003c\/strong\u003e A worn or cracked check valve, like the one replaced by the Sierra 18-99546, is a common cause of an oil change pump losing suction or failing to draw oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I replace just the check valve instead of the whole oil change pump?\u003c\/strong\u003e Yes, the Sierra 18-99546 Check Valve Assembly lets you replace the failed valve component on its own rather than buying an entirely new oil change pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-99546 an OEM part or aftermarket?\u003c\/strong\u003e The 18-99546 is a Sierra-branded replacement part cross-referenced to the CDI Electronics 551-33cv, sold as an aftermarket equivalent for that valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-99546 Check Valve Assembly?\u003c\/strong\u003e The UPC for the Sierra 18-99546 Check Valve Assembly is 736983856203.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-99546 check valve require any special tools to install?\u003c\/strong\u003e The 18-99546 is a complete valve assembly designed as a direct swap for the existing check valve in a compatible oil change pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of marine equipment does the 18-99546 belong to?\u003c\/strong\u003e The Sierra 18-99546 Check Valve Assembly is listed under marine oil change pumps and their replacement components.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988446163163,"sku":"SIE-18-99546","price":27.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-551-33CV_lg__66931.1558112053.500.750.jpg?v=1785188454"},{"product_id":"sea-dog-351300-1-hose-deck-fill-body-316-stainless-steel-1-1-2-inch-hose-body-only-keyless-cap-compatible","title":"Sea-Dog Hose Deck Fill Body, 316 Stainless Steel, Body Only for 1-1\/2 Inch Hose - 351300-1","description":"\u003cp\u003eThe Sea-Dog 351300-1 is the body-only component of Sea-Dog's Hose Deck Fill system, sized for 1-1\/2 inch hose. This listing is the deck fill body alone (no cap included), letting boat owners replace a damaged or corroded fill body without buying a full new assembly, or pair it with the cap of their choice from Sea-Dog's color-coded lineup (diesel green, water blue, or waste black).\u003c\/p\u003e\u003cp\u003eThe body is constructed of investment cast 316 stainless steel for corrosion resistance in marine environments. It uses an 11-1\/2 NPSM straight thread pitch, the same threading Sea-Dog's replacement caps are designed to engage, so compatible caps thread on securely for a proper seal at the deck.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the body mounts with three #10 flat-head fasteners (not included) through the deck. USCG regulations require a bonding wire connection at the fill to prevent sparking, so the body should be wired into the boat's bonding system during installation. A flange gasket (part number 351349) is sold separately and is recommended for a watertight seal between the body and the deck.\u003c\/p\u003e\u003cp\u003eThis body is intended for 1-1\/2 inch hose connections and is part of Sea-Dog's broader Hose Deck Fill product family, which includes color-coded replacement caps, O-rings, and gaskets sold individually.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351300-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Hose Deck Fill Body (Body Only, No Cap)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment cast 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.728 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Three #10 flat-head fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket:\u003c\/strong\u003e Sold separately, Flange Gasket part number 351349\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding:\u003c\/strong\u003e Requires bonding wire connection per USCG regulations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514351966\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 351300-1 come with a cap?\u003c\/strong\u003e No. The 351300-1 is the deck fill body only, with no cap included, so it should be paired with a Sea-Dog replacement cap sized for 1-1\/2 inch hose fittings, such as the color-coded diesel, water, or waste caps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size is this deck fill body designed for?\u003c\/strong\u003e The 351300-1 deck fill body is sized for 1-1\/2 inch hose connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 351300-1 deck fill body made of?\u003c\/strong\u003e It is made of investment cast 316 stainless steel, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 351300-1 deck fill body weigh?\u003c\/strong\u003e The Sea-Dog 351300-1 weighs 0.728 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread does the deck fill body use?\u003c\/strong\u003e The 351300-1 body uses an 11-1\/2 NPSM straight thread pitch, matching the thread on Sea-Dog's compatible replacement caps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is needed to install the 351300-1?\u003c\/strong\u003e Installation requires three #10 flat-head fasteners, which are not included with the 351300-1 deck fill body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a gasket included with the 351300-1?\u003c\/strong\u003e No, a gasket is not included. Sea-Dog sells a matching flange gasket separately under part number 351349 for a watertight seal at the deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this deck fill need to be bonded?\u003c\/strong\u003e Yes. USCG regulations require a bonding wire connection at the 351300-1 deck fill body to prevent sparking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 351300-1 body with any Sea-Dog deck fill cap?\u003c\/strong\u003e The 351300-1 body threads with 11-1\/2 NPSM straight thread pitch, the same threading used on Sea-Dog's 1-1\/2 inch replacement caps, so it is intended to pair with those caps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I buy the deck fill body separately instead of a complete kit?\u003c\/strong\u003e The 351300-1 lets you replace just the body of a Sea-Dog Hose Deck Fill if it is damaged or corroded, without having to replace a still-serviceable cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 351300-1?\u003c\/strong\u003e The UPC for the Sea-Dog 351300-1 deck fill body is 035514351966.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988759097563,"sku":"S-D-351300-1","price":61.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4803.jpg?v=1784428920"},{"product_id":"sea-dog-351321-1-diesel-deck-fill-1-1-2-hose-316-stainless-steel-with-locking-keyed-cap-and-chain","title":"Sea-Dog Locking Diesel Hose Deck Fill, 1-1\/2 Inch Hose, 316 Stainless Steel, Part 351321-1","description":"\u003cp\u003eThe Sea-Dog 351321-1 is a locking hose-style deck fill built for diesel fuel systems using 1-1\/2 inch fill hose. Its locking cap is designed to prevent fuel theft: the cap spins freely while in the locked position, and to unlock it the owner turns the included key until the keyhole lines up with the cap tabs. Two keys are supplied along with a cap attachment cable, so the cap stays tethered to the boat and cannot be misplaced during fueling.\u003c\/p\u003e\u003cp\u003eThe fitting is investment cast from 316 stainless steel, a corrosion-resistant alloy suited to long-term saltwater exposure, giving the deck fill durability well beyond stamped or plated fittings. The cap measures 2-1\/8 inches in diameter and threads onto a 11-1\/2 NPSM straight thread pitch. The body is marked \"Diesel\" and color-coded per the international deck fill identification system, so crew and fuel dock staff can confirm the correct fuel type at a glance and avoid a costly misfueling.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the deck fill mounts with three #10 flathead fasteners (fasteners not included), and it accepts standard 1-1\/2 inch fill hose. Because a deck fill sits in an open fuel-vapor path, USCG regulations require a bonding wire be connected to the fitting to prevent sparking; installers should wire the bonding connection as part of the install. This deck fill is sold individually.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351321-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Marking:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 2-1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Type:\u003c\/strong\u003e Locking, spins freely when locked\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Keys:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Attachment Cable:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #10 FH (flathead), 3 required, not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment cast 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.966 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding:\u003c\/strong\u003e USCG-required bonding wire connection to prevent sparking\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat fuel type is the Sea-Dog 351321-1 deck fill designed for?\u003c\/strong\u003e The 351321-1 is marked and color-coded for Diesel fuel, so it should be installed on the diesel fill line rather than a gasoline or water fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does this deck fill accept?\u003c\/strong\u003e It is built for 1-1\/2 inch fill hose; a separate 2 inch hose version of this locking diesel deck fill is available as a different part number if a larger hose is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the locking cap work?\u003c\/strong\u003e The cap on part 351321-1 spins freely while locked so it cannot be forced open; to unlock it, turn the supplied key until the keyhole lines up with the cap tabs, then the cap can be removed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many keys come with the deck fill?\u003c\/strong\u003e Two keys are included with the Sea-Dog 351321-1 locking deck fill, along with a cap attachment cable to keep the cap tethered to the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 351321-1 deck fill made from?\u003c\/strong\u003e It is investment cast from 316 stainless steel, a corrosion-resistant grade chosen for long-term durability in a marine saltwater environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the mounting fasteners?\u003c\/strong\u003e The deck fill installs with three #10 flathead fasteners; the fasteners themselves are not included with part 351321-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cap diameter and thread pitch on this deck fill?\u003c\/strong\u003e The cap measures 2-1\/8 inches in diameter and uses an 11-1\/2 NPSM straight thread pitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bonding wire required for installation?\u003c\/strong\u003e Yes, USCG regulations require a bonding wire be connected to the 351321-1 deck fill to prevent sparking around fuel vapors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this deck fill weigh?\u003c\/strong\u003e The Sea-Dog 351321-1 diesel hose deck fill weighs 0.966 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the deck fill come with a non-locking cap option?\u003c\/strong\u003e The 351321-1 is the locking-cap version; Sea-Dog also offers a replacement non-locking cap (part 351391-1) as a separate accessory for this deck fill line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this deck fill sold as a single unit?\u003c\/strong\u003e Yes, the 351321-1 is packaged and sold as a standard pack of 1 each.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988759228635,"sku":"S-D-351321-1","price":48.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7144.jpg?v=1784428934"},{"product_id":"sea-dog-351323-1-waste-deck-fill-for-1-1-2-hose-316-stainless-steel-keyed-locking-cap","title":"Sea-Dog Waste Deck Fill for 1-1\/2 Inch Hose, 316 Stainless Steel, Part 351323-1","description":"\u003cp\u003eThe Sea-Dog 351323-1 is a stainless steel waste deck fill designed for 1-1\/2 inch hose, used to route sewage discharge or pump-out lines from the boat's waste holding tank to a deck-mounted fitting. It is constructed of corrosion resistant investment cast 316 stainless steel for long-term durability in a marine environment. The cap is slotted and requires a key to open and close, adding a layer of security against accidental or unauthorized access to the waste system. Unlike Sea-Dog's gas, diesel, and water deck fills, the waste version does not include an attachment chain for the cap. The deck fill installs with three #10 flat head fasteners (not included) and is sized for a 1-1\/2 inch hose connection, with a cap diameter of 1-7\/8 inches and an 11-1\/2 NPSM straight thread pitch. As with other metal deck fills, USCG regulations require a bonding wire be connected to this fitting to prevent sparking. This is the complete deck fill unit; a matching replacement cap and separate stainless or nylon deck fill keys are also available if the original cap or key is lost or damaged, and a body-only fitting is offered separately for installations that only need the base without a keyed cap. Because the waste fitting is a specific part in the Sea-Dog deck fill lineup, be sure to select the waste-labeled version rather than the gas, diesel, or water variants, which use different cap markings and, in the case of gas\/diesel\/water, include an attachment chain.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 351323-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Waste\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch:\u003c\/strong\u003e 11-1\/2 NPSM straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment cast 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Fasteners:\u003c\/strong\u003e Three #10 flat head screws (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment Chain:\u003c\/strong\u003e Not included on the waste version\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Cap:\u003c\/strong\u003e Slotted cap, requires key to open and close\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding:\u003c\/strong\u003e Bonding wire required per USCG regulations to prevent sparking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.952 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7.75 x 5.5 x 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514351690\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the Sea-Dog 351323-1 waste deck fill fit?\u003c\/strong\u003e It is sized for 1-1\/2 inch hose, matching the waste discharge line running to the holding tank pump-out fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this deck fill come with an attachment chain for the cap?\u003c\/strong\u003e No. The Sea-Dog 351323-1 waste deck fill is one of the versions that does not include an attachment chain; Sea-Dog's gas, diesel, and water deck fills include a chain, but the waste version does not.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 351323-1 deck fill made of?\u003c\/strong\u003e It is made of investment cast 316 stainless steel, chosen for corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a key to open the cap?\u003c\/strong\u003e Yes, the cap on part 351323-1 is slotted and requires a key to open and close, which adds security against accidental or unauthorized access.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cap diameter and thread pitch on this deck fill?\u003c\/strong\u003e The cap diameter is 1-7\/8 inches with an 11-1\/2 NPSM straight thread pitch, sized for the 1-1\/2 inch hose version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 351323-1 deck fill mounted?\u003c\/strong\u003e It installs with three #10 flat head fasteners, which are not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs bonding required for this deck fill?\u003c\/strong\u003e Yes. USCG regulations require a bonding wire be connected to the Sea-Dog 351323-1 to prevent sparking, since it is a metal fitting in a fuel or waste system pathway.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 351323-1 weigh?\u003c\/strong\u003e The Sea-Dog waste deck fill weighs 0.952 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just a replacement cap or key instead of the whole unit?\u003c\/strong\u003e Yes, Sea-Dog offers a separate replacement cap for 1-1\/2 inch hose deck fills, as well as stainless steel and nylon deck fill keys, sold individually from the complete 351323-1 unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this and the body-only deck fill?\u003c\/strong\u003e The 351323-1 is the complete waste deck fill with a keyed, slotted cap, while Sea-Dog also sells a body-only fitting for 1-1\/2 inch hose without the keyed cap as a separate part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this deck fill labeled specifically for waste?\u003c\/strong\u003e Yes, part 351323-1 is the waste-designated deck fill in Sea-Dog's lineup, distinct from the gas, diesel, and water versions which use the same hose and fastener sizing but different cap markings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the deck fill?\u003c\/strong\u003e The Sea-Dog 351323-1 measures 7.75 x 5.5 x 3.5 inches overall.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988759392475,"sku":"S-D-351323-1","price":45.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7144_81d476b8-ea1d-490e-8955-54dcac600c5b.jpg?v=1784428944"},{"product_id":"sea-dog-423033-1-bilge-pump-water-alarm-panel-12v-15a-audible-and-visual-high-water-warning-abs","title":"Sea-Dog Bilge Pump Water Alarm Panel 423033-1, 12 Volt Audible and Visual Bilge Alarm","description":"\u003cp\u003eThe Sea-Dog Bilge Pump Water Alarm Panel (423033-1) gives boaters both an audible and visual warning that water in the bilge has risen above the bilge pump float switch level, so a rising water problem is caught before it becomes a serious one. The panel is constructed of injection molded ABS for corrosion resistance in a marine environment and is rated for 12 volt systems with a 15 amp fuse. It installs with four RH fasteners (not included), making it a straightforward add to any helm or panel layout.\u003c\/p\u003e\u003cp\u003eThis alarm panel is a standalone warning device and does not include a bilge pump switch. For a complete setup that combines pump control with the alarm function, it is designed to be used alongside a Sea-Dog Bilge Pump Switch Panel (423030, 423040, or 423046). Buyers who want the alarm and switch combined in one unit should instead look at the Sea-Dog Bilge Pump Water Alarm Panel with Switch (423035-1).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 423033-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuse Rating:\u003c\/strong\u003e 15 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.162 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514425797\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Requires four RH fasteners, not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Companion Product:\u003c\/strong\u003e Sea-Dog Bilge Pump Switch Panel (423030, 423040, or 423046)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal 12 volt bilge pump alarm circuit installation; not specific to a particular boat make or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sea-Dog 423033-1 alarm panel actually do?\u003c\/strong\u003e It provides both an audible and visual warning when the water level in the bilge rises above the bilge pump float switch level, alerting the boat operator to a potential flooding issue before it worsens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this panel include a bilge pump switch?\u003c\/strong\u003e No, the 423033-1 is an alarm-only panel with no built-in switch function; it is meant to be paired with a separate Sea-Dog Bilge Pump Switch Panel (423030, 423040, or 423046) for full pump control plus alarm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a version that combines the alarm and a switch in one unit?\u003c\/strong\u003e Yes, the Sea-Dog Bilge Pump Water Alarm Panel with Switch (423035-1) combines the alarm function with a control switch that selects between automatic and manual (momentary on) bilge pump operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage system is the 423033-1 alarm panel rated for?\u003c\/strong\u003e It is rated for 12 volt marine electrical systems and uses a 15 amp fuse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the alarm panel made from?\u003c\/strong\u003e It is constructed of injection molded ABS (acrylonitrile butadiene styrene), a durable plastic suited to marine panel applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 423033-1 panel?\u003c\/strong\u003e The panel measures 2-7\/16 inches by 3 inches by 1-3\/4 inches by 2-1\/2 inches across its listed panel dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the bilge alarm panel weigh?\u003c\/strong\u003e The Sea-Dog 423033-1 weighs 0.162 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is needed to install this alarm panel?\u003c\/strong\u003e Installation requires four RH fasteners, which are not included with the 423033-1 panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a replacement fuse available for this panel?\u003c\/strong\u003e A 15 amp replacement fuse holder is available as a separate accessory for use with Sea-Dog bilge alarm and switch panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 423033-1 be used without a Sea-Dog switch panel?\u003c\/strong\u003e Yes, it functions as a standalone water level alarm, though Sea-Dog recommends pairing it with a Bilge Pump Switch Panel (423030, 423040, or 423046) for maximum effectiveness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 423033-1 bilge alarm panel?\u003c\/strong\u003e The UPC for the 423033-1 Bilge Pump Water Alarm Panel is 035514425797.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988779446491,"sku":"S-D-423033-1","price":15.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7338.jpg?v=1784429479"},{"product_id":"sea-dog-423040-1-deluxe-bilge-pump-panel-switch-with-20a-circuit-breaker-12v-on-off-auto-three-way-switch-backlit-abs","title":"Sea-Dog Bilge Pump Switch Panel, On-Off-Auto with Breaker, Black, Part 423040-1","description":"\u003cp\u003eThe Sea-Dog 423040-1 is an On-Off-Auto bilge pump switch panel that lets you control your boat's bilge pump directly from a single panel, without needing a separate bilge pump switch. The control switch selects between the automatic and manual (momentary on) function of the pump, and the panel includes a built-in breaker for circuit protection. Finished in black, it is designed as a clean, dedicated helm or panel-mounted control point for bilge pump operation.\u003c\/p\u003e\u003cp\u003eThis switch panel is part of the Sea-Dog line of bilge pump switch panels (423030, 423040, and 423046), which are commonly paired with a Sea-Dog Bilge Water Alarm Panel to provide both manual pump control and an audible\/visual warning when bilge water rises above the float switch level. The 423040-1 is sold and tracked under Sea-Dog's own part number and UPC, making it easy to identify a genuine replacement or new installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 423040-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bilge Pump Switch Panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Function:\u003c\/strong\u003e On-Off-Auto\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaker:\u003c\/strong\u003e Integrated circuit breaker (W\/BKR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.228 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514423021\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the On-Off-Auto switch on the Sea-Dog 423040-1 do?\u003c\/strong\u003e It lets you choose between running the bilge pump manually (momentary on), turning it off, or letting it run automatically off its own float switch, all from the 423040-1 panel, so a separate bilge pump switch is not needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this panel include a breaker?\u003c\/strong\u003e Yes, the Sea-Dog 423040-1 bilge pump switch panel is built with an integrated breaker (designated W\/BKR) for circuit protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 423040-1 switch panel?\u003c\/strong\u003e It is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 423040-1 weigh?\u003c\/strong\u003e The panel weighs 0.228 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 423040-1 the same as the 423030 or 423046 panels?\u003c\/strong\u003e No, 423030, 423040, and 423046 are separate part numbers within Sea-Dog's bilge pump switch panel lineup; the 423040-1 is its own distinct part and should be ordered by its specific part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this panel be used with a bilge pump that already has a built-in switch?\u003c\/strong\u003e The 423040-1 is designed to provide the on-off-auto control function itself, which is why it is intended to replace the need for a separate pump-mounted switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 423040-1?\u003c\/strong\u003e The UPC is 035514423021.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 423040-1 covered by a warranty?\u003c\/strong\u003e Yes, it is backed by Sea-Dog's limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number I should reference when ordering?\u003c\/strong\u003e Order by Sea-Dog part number 423040-1, which is the manufacturer's public part number for this specific switch panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this panel meant to work with a bilge water alarm?\u003c\/strong\u003e Sea-Dog's bilge pump switch panels, including the 423040-1, are commonly used alongside a separate Sea-Dog Bilge Water Alarm Panel to add audible and visual high-water warning in addition to pump control.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988812345563,"sku":"S-D-423040-1","price":27.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7338_084ef68f-8a18-4bfa-bc60-6a6f28ef2b12.jpg?v=1784429497"},{"product_id":"sea-dog-503236-1-manual-bilge-pump-24-x-36-10-gpm-hand-pump-for-small-boats-and-emergency-dewatering","title":"Sea-Dog Manual Bilge Pump 503236-1, Extends 24 to 36 Inches, 10 GPM","description":"\u003cp\u003eThe Sea-Dog Manual Bilge Pump (503236-1) is a hand-operated bilge pump designed for small boats without electrical power, or as an emergency backup on larger boats when electrical power is lost. The pump body extends from 24 inches to 36 inches, giving operators reach and leverage while remaining compact enough to stow when not in use. At 6 strokes per gallon, it delivers up to 10 gallons per minute of pumping capacity.\u003c\/p\u003e\u003cp\u003eThe pump is constructed of durable, UV resistant injection molded PVC and polypropylene, making it suitable for continuous exposure to sun and marine conditions without degrading. The foot valve is removable for easy cleaning, and the pump features a removable hose with storage clips so it can be broken down and stowed compactly aboard. For a leak-free connection, the hose must be screwed into the fitting rather than simply pushed on. At 1.95 pounds, the pump is lightweight and easy to keep on hand as backup equipment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 503236-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Manual Bilge Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollapsed Length (A):\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Length (B):\u003c\/strong\u003e 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrokes Per Gallon:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Capacity:\u003c\/strong\u003e 10 gallons per minute (GPM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.95 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PVC and Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Injection Molded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Removable foot valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514503020\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much water can the Sea-Dog 503236-1 bilge pump move?\u003c\/strong\u003e The Sea-Dog 503236-1 manual bilge pump moves up to 10 gallons per minute, at a rate of 6 strokes per gallon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this bilge pump?\u003c\/strong\u003e The 503236-1 pump body extends from a collapsed length of 24 inches to a fully extended length of 36 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog manual bilge pump made of?\u003c\/strong\u003e It is constructed of durable, UV resistant injection molded PVC and polypropylene, so it can be left aboard and exposed to sun without breaking down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pump need electrical power to operate?\u003c\/strong\u003e No. The Sea-Dog 503236-1 is a manual, hand-operated bilge pump intended for small boats without electrical power, or as an emergency backup pump when a boat's electrical bilge pump loses power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 503236-1 bilge pump weigh?\u003c\/strong\u003e It weighs 1.95 pounds, making it lightweight and easy to store aboard as backup equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the foot valve be cleaned?\u003c\/strong\u003e Yes, the foot valve on the 503236-1 is removable, so it can be taken out and cleaned of debris that may clog the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the hose attached to prevent leaks?\u003c\/strong\u003e The hose on this Sea-Dog manual bilge pump must be screwed into the fitting rather than pushed on, which prevents leaks at the connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the pump easy to stow on a boat?\u003c\/strong\u003e Yes. The 503236-1 is compact and lightweight, and it includes a removable hose with storage clips so the whole unit can be broken down and stowed easily when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat sizes does this Sea-Dog manual bilge pump come in?\u003c\/strong\u003e Sea-Dog offers this manual bilge pump in three sizes: an 18 to 24 inch model (6 GPM), this 24 to 36 inch model 503236-1 (10 GPM), and a 36 to 72 inch model (13 GPM).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 503236-1 bilge pump?\u003c\/strong\u003e The UPC for the Sea-Dog 24 to 36 inch manual bilge pump, part number 503236-1, is 035514503020.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988824895707,"sku":"S-D-503236-1","price":60.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8244.jpg?v=1784429677"},{"product_id":"sea-dog-517526-1-sink-drain-with-strainer-for-2-openings-5-8-barb-stainless-steel-body","title":"Sea-Dog Sink Drain with Strainer 517526-1, Straight 2 Inch, Stainless Steel Body, 5\/8 Inch Barb","description":"\u003cp\u003eThe Sea-Dog Sink Drain with Strainer (517526-1) is a straight-style drain fitting built for 2 inch sink openings aboard boats, RVs, and other marine applications. It combines a stainless steel body with a zinc cap and nylon fittings, giving it the corrosion resistance needed for galley sinks and other wet environments while keeping the cap durable against repeated use. The drain includes a 5\/8 inch barb on the underside, allowing a length of hose to be pushed on and clamped for a secure connection to a through-hull or drain line.\u003c\/p\u003e\u003cp\u003eThe strainer sits in the drain opening to catch debris before it reaches the plumbing, and the removable design makes it easy to lift out for cleaning. This straight configuration is intended for direct, in-line drainage where the fitting passes straight through the sink base rather than at an angle. It is packaged as a single unit, ready to install in any 2 inch sink cutout without additional adapters.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 517526-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening Size:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Size:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel Body\/Zinc Cap\/Nylon Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.512 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Removable strainer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Hole Size:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514517201\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size sink opening does this drain fit?\u003c\/strong\u003e The Sea-Dog 517526-1 sink drain is sized for 2 inch openings, matching the standard cutout used on most boat galley and marine sinks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the barb size on the drain outlet?\u003c\/strong\u003e A 5\/8 inch barb is molded into the underside of the drain, sized to accept 5\/8 inch hose for connecting to a drain line or through-hull fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a straight or angled drain?\u003c\/strong\u003e This is the straight-style version of the Sea-Dog sink drain, part number 517526-1, meaning it passes directly through the sink base rather than at an angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 517526-1 drain made from?\u003c\/strong\u003e It has a stainless steel body, a zinc cap, and nylon fittings, a combination chosen for corrosion resistance in wet marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the strainer be removed for cleaning?\u003c\/strong\u003e Yes, the strainer on the Sea-Dog 517526-1 sink drain is removable, making it easy to clear out debris that collects during use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this sink drain weigh?\u003c\/strong\u003e The Sea-Dog Sink Drain with Strainer (517526-1) weighs 0.512 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many drains come in one package?\u003c\/strong\u003e The 517526-1 sink drain ships as a single unit, with a standard pack of 1 each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this product?\u003c\/strong\u003e The package includes the complete Sea-Dog 517526-1 sink drain assembly: the stainless steel body, zinc cap, nylon fittings, and strainer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this drain fit tanks, baitwells, or ice chests as well as sinks?\u003c\/strong\u003e The Sea-Dog 517526-1 is designed as a sink drain with strainer for 2 inch sink openings; it is not the same product as Sea-Dog's separate nylon drain plugs made for transoms, baitwells, and tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the drain body corrosion resistant?\u003c\/strong\u003e Yes, the body is stainless steel, paired with a zinc cap and nylon fittings, so it resists corrosion in the wet, salt-exposed conditions typical of marine galleys.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this drain?\u003c\/strong\u003e The manufacturer part number is 517526-1, identifying the straight, 2 inch Sea-Dog sink drain with strainer.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988824961243,"sku":"S-D-517526-1","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5228.jpg?v=1784429682"},{"product_id":"sea-dog-manual-bilge-pump-18-x-24-hand-operated-emergency-bilge-pump-6-gpm-mpn-503124-1","title":"Sea-Dog Manual Bilge Pump, 18 Inch to 24 Inch, 6 GPM Flow Rate","description":"\u003cp\u003eThe Sea-Dog Manual Bilge Pump (503124-1) is a hand-operated pump built for small boats without electrical power, or as an emergency backup on larger boats when power is no longer available. It extends from 18 inches to 24 inches, is compact and lightweight, and moves up to 6 gallons per minute at a rate of 10 strokes per gallon. The pump is constructed of durable, UV-resistant injection molded PVC and polypropylene, so it holds up to sun and saltwater exposure over repeated use.\u003c\/p\u003e\u003cp\u003eA removable foot valve makes cleaning simple, and the hoses are also removable with storage clips included so the pump stows away compactly when not in use. The hose connections are designed to be screwed in rather than pushed in, which prevents leaks at the fittings. This makes the pump a reliable, no-power backup option to keep aboard any boat as insurance against a failed electric bilge pump or a loss of power.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 503124-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Manual Bilge Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Length:\u003c\/strong\u003e 18 inches to 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrokes Per Gallon:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 6 gallons per minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.566 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded PVC\/Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual, no electrical power required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514503013\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much water does the Sea-Dog 503124-1 bilge pump move?\u003c\/strong\u003e The Sea-Dog 503124-1 manual bilge pump moves up to 6 gallons per minute, at a rate of 10 strokes per gallon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this bilge pump?\u003c\/strong\u003e This Sea-Dog manual bilge pump extends from 18 inches to 24 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pump need electrical power to work?\u003c\/strong\u003e No. The Sea-Dog 503124-1 is a manual, hand-operated pump designed for small boats without electrical power, or as an emergency backup on larger boats if power is lost.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog manual bilge pump made of?\u003c\/strong\u003e It is constructed of durable, UV-resistant injection molded PVC and polypropylene, which holds up to sun and saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the foot valve be cleaned?\u003c\/strong\u003e Yes, the foot valve on the Sea-Dog 503124-1 bilge pump is removable, making it easy to clean out debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do the hoses attach to the pump?\u003c\/strong\u003e The hoses on this Sea-Dog bilge pump must be screwed in rather than pushed in, which prevents leaks at the connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the pump stored when not in use?\u003c\/strong\u003e The Sea-Dog 503124-1 features removable hoses with storage clips, allowing the pump to be stowed compactly aboard the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this bilge pump weigh?\u003c\/strong\u003e The Sea-Dog manual bilge pump (503124-1) weighs 1.566 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bilge pump suitable as a backup for an electric bilge pump?\u003c\/strong\u003e Yes, this hand-operated pump is designed for use in small boats without electrical power or as an emergency backup on larger boats when power is no longer available, making it a practical companion to an electric bilge pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre longer versions of this manual bilge pump available?\u003c\/strong\u003e Sea-Dog also makes this manual bilge pump in longer extended lengths with higher flow rates for larger boats; the 503124-1 is the compact 18 inch to 24 inch, 6 GPM version.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825059547,"sku":"S-D-503124-1","price":21.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8244_5ddf4179-3b3e-4e4a-a564-56fcd75129cf.jpg?v=1784429685"},{"product_id":"sea-dog-513120-1-washdown-water-outlet-cast-316-stainless-steel-1-2-fipt-x-3-4-mght-garden-hose-connection","title":"Sea-Dog Washdown Water Outlet 513120-1, 316 Stainless Steel, 1\/2 Inch FIPT x 3\/4 Inch Garden Hose Thread","description":"\u003cp\u003eThe Sea-Dog Washdown Water Outlet (part number 513120-1) connects a standard garden hose to an onboard water system, giving boaters a dedicated washdown point for rinsing gear, decks, anchors, and fishing equipment. The outlet is machined from investment cast 316 stainless steel, a corrosion resistant alloy well suited to saltwater and marine environments where lesser metals would pit or rust over time.\u003c\/p\u003e\u003cp\u003eThe fitting uses a 1\/2 inch FIPT (female iron pipe thread) connection on the plumbing side and a 3\/4 inch MGHT (male garden hose thread) on the outlet side, so it accepts a standard male hose connector without adapters. Installation requires a separate ball or gate valve, sold separately, to regulate water flow to the outlet. The outlet mounts with a #8 flat head fastener and measures 2-3\/4 inch by 1-11\/16 inch by 2-3\/16 inch by 1 inch across its mounting dimensions.\u003c\/p\u003e\u003cp\u003eSea-Dog also offers a replacement cap (512129-1) for this outlet as a separate accessory, useful for boaters who want a spare or replacement closure without buying the full assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 513120-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Washdown Water Outlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Size:\u003c\/strong\u003e 1\/2 inch FIPT x 3\/4 inch MGHT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Standard Male Hose Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2-3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-11\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-3\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #8 FH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.32 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 513120-1 used for?\u003c\/strong\u003e The Sea-Dog 513120-1 is a washdown water outlet that lets a garden hose connect to an onboard water system, giving boaters a washdown point for rinsing decks, anchors, and gear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 513120-1 include a shutoff valve?\u003c\/strong\u003e No, the 513120-1 washdown outlet requires a separate ball or gate valve to regulate water flow; the valve is not included and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does this washdown outlet use?\u003c\/strong\u003e The pipe size is 1\/2 inch FIPT on the plumbing side and 3\/4 inch MGHT on the outlet side, matching a standard male garden hose connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog washdown outlet made of?\u003c\/strong\u003e It is constructed of investment cast 316 stainless steel, a corrosion resistant alloy suited to saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 513120-1 weigh?\u003c\/strong\u003e The Sea-Dog Washdown Water Outlet 513120-1 weighs 0.32 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the mounting dimensions of the 513120-1?\u003c\/strong\u003e The 513120-1 measures 2-3\/4 inch by 1-11\/16 inch by 2-3\/16 inch by 1 inch and mounts with a #8 flat head fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use a standard garden hose with this outlet?\u003c\/strong\u003e Yes, the 513120-1 has a 3\/4 inch MGHT connection that accepts a standard male hose connector without adapters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a replacement cap available for this washdown outlet?\u003c\/strong\u003e Yes, Sea-Dog offers part number 512129-1 as a replacement cap for the 513120-1 washdown outlet, sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fastener does the 513120-1 use for mounting?\u003c\/strong\u003e The washdown outlet uses a #8 flat head (FH) fastener for mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this washdown outlet resistant to saltwater corrosion?\u003c\/strong\u003e Yes, because the 513120-1 is investment cast from 316 stainless steel, a grade chosen for corrosion resistance in marine and saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many units come in a standard pack of the 513120-1?\u003c\/strong\u003e The Sea-Dog 513120-1 washdown outlet has a standard pack quantity of 5 each.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825092315,"sku":"S-D-513120-1","price":26.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7174.jpg?v=1784429687"},{"product_id":"sea-dog-513110-1-fresh-water-inlet-316-stainless-steel-dockside-shore-water-hookup-1-2-fipt-x-3-4-fght","title":"Sea-Dog Fresh Water Inlet, 316 Stainless Steel, 1\/2 Inch FIPT x 3\/4 Inch FGHT - 513110-1","description":"\u003cp\u003eThe Sea-Dog Fresh Water Inlet (513110-1) provides a fresh water hookup point on a boat's hull, letting you connect a standard garden hose to a pressurized onboard water system while moored at a dock or marina. It uses a standard female swivel hose connector so a hose threads on and off easily, and it comes with a black plastic watertight plug that seals the fitting when it is not connected to shore water, keeping the pipe run protected and free of debris.\u003c\/p\u003e\u003cp\u003eThe inlet is machined from investment cast 316 stainless steel, a corrosion-resistant alloy chosen for marine hardware that stays exposed to saltwater spray and weather. The pipe connection is 1\/2 inch FIPT (female iron pipe thread) on the inboard side and 3\/4 inch FGHT (female garden hose thread) on the outboard side, matching common marine plumbing and standard garden hose fittings. It mounts through the hull or deck with a #8 flat head fastener and is installed or removed using a 1\/2 inch Allen wrench.\u003c\/p\u003e\u003cp\u003eThis is deck hardware for the plumbing side of a boat's fresh water system rather than an engine or drivetrain component, so it fits any boat with a pressurized fresh water system and a suitable mounting location, without being tied to a specific engine or hull make.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 513110-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fresh Water Inlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Size:\u003c\/strong\u003e 1\/2 inch FIPT x 3\/4 inch FGHT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Standard female swivel hose connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 2-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #8 FH (flat head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Black plastic watertight plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Tool:\u003c\/strong\u003e 1\/2 inch Allen wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514513036\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 513110-1 used for?\u003c\/strong\u003e The Sea-Dog 513110-1 is a fresh water inlet that lets you hook a garden hose to a boat's pressurized fresh water system while docked, so you can fill onboard tanks or run water without using the boat's own pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose fitting does this inlet use?\u003c\/strong\u003e It has a standard female swivel hose connector on the outside, with a 1\/2 inch FIPT x 3\/4 inch FGHT pipe size connecting to the boat's plumbing, so a standard garden hose or shore water hose threads directly on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 513110-1 made from?\u003c\/strong\u003e It is machined from investment cast 316 stainless steel, a corrosion-resistant grade commonly used in marine deck hardware that is regularly exposed to saltwater and weather.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fresh water inlet come with a cap or plug?\u003c\/strong\u003e Yes, the Sea-Dog 513110-1 includes a black plastic watertight plug that seals the connector when it is not hooked up to a shore water hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tool do I need to install this fitting?\u003c\/strong\u003e Installation and removal of the 513110-1 fresh water inlet uses a 1\/2 inch Allen wrench along with a #8 flat head fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog fresh water inlet weigh?\u003c\/strong\u003e The 513110-1 weighs 0.45 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the mounting dimensions of the 513110-1?\u003c\/strong\u003e The fitting measures 2-3\/4 inches at dimension A, 2-3\/8 inches at dimension B, 2-3\/16 inches at dimension C, and 1 inch at dimension D, secured with a #8 flat head fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the male or female hose connection?\u003c\/strong\u003e The 513110-1 fresh water inlet has a standard female swivel hose connector, designed to receive a male hose fitting from a garden hose or shore water supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this fresh water inlet and Sea-Dog's washdown water outlet?\u003c\/strong\u003e The 513110-1 fresh water inlet has a female swivel hose connector for supplying water into the boat's pressurized system, while Sea-Dog's washdown water outlet is a separate part with a male hose connector for drawing water out to a washdown hose; the two look similar but serve opposite functions and are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fitting work on any boat?\u003c\/strong\u003e The 513110-1 is deck hardware for a boat's fresh water plumbing and is not tied to a specific engine or hull make, so it fits any boat with a pressurized fresh water system and a suitable mounting location for the 1\/2 inch FIPT x 3\/4 inch FGHT connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a shutoff valve needed with this inlet?\u003c\/strong\u003e The fresh water inlet itself is a hose hookup fitting; the dossier does not specify an integrated shutoff, so check your onboard plumbing for a valve if one is needed to regulate flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 513110-1?\u003c\/strong\u003e The UPC for the Sea-Dog Fresh Water Inlet, part number 513110-1, is 035514513036.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825125083,"sku":"S-D-513110-1","price":34.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7173.jpg?v=1784429688"},{"product_id":"sea-dog-520041-1-machined-bronze-garboard-drain-replacement-plug-1-2-npt-for-520040-garboard-drain","title":"Sea-Dog 520041-1 Machined Bronze Garboard Drain Replacement Plug, 1\/2 Inch NPT","description":"\u003cp\u003eThe Sea-Dog 520041-1 is a machined bronze replacement plug for garboard drain fittings, sized for a 1\/2 inch NPT thread. It is sold as the plug only, giving boat owners an economical way to replace a worn, lost, or damaged garboard drain plug without buying a complete drain assembly or wrench. Bronze construction resists the corrosive effects of fresh and salt water exposure, making it suitable for use in the below-waterline garboard drain location where a dependable, watertight seal matters. The tapered NPT thread seats into the mating garboard drain body to seal the hull drain opening when the boat is in the water, and is removed to drain bilge water when the boat is out of the water or on a trailer. At 0.04 pounds, the plug is compact and lightweight, and its precision-machined threads are designed to thread smoothly into a standard 1\/2 inch NPT garboard drain fitting for a secure fit. This replacement plug is compatible with Sea-Dog's Plugmate wrench system for installation and removal, and is intended for boat owners and marine service technicians maintaining or restoring garboard drain hardware. Because it is a genuine Sea-Dog part, it is manufactured to the same thread tolerances as the original equipment it replaces, helping ensure a proper watertight fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520041-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Garboard Drain Replacement Plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Machined Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/2 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520027\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does the Sea-Dog 520041-1 garboard drain plug use?\u003c\/strong\u003e It uses a 1\/2 inch NPT tapered thread, which seats into the mating garboard drain fitting on the hull to form a watertight seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 520041-1 the plug only, or does it include a wrench?\u003c\/strong\u003e It is the replacement plug only; no wrench is included. Sea-Dog's separate 520045 Plugmate wrench is designed to install and remove this style of plug, and the 520045-1 wrench version comes with one of these plugs stored in its handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 520041-1 plug made from?\u003c\/strong\u003e It is machined bronze, chosen for its resistance to corrosion in fresh and salt water marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 520041-1 replacement plug weigh?\u003c\/strong\u003e The Sea-Dog 520041-1 weighs 0.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a garboard drain plug used for?\u003c\/strong\u003e A garboard drain plug seals the below-waterline hull drain fitting while the boat is in the water and is removed to let bilge water drain out when the boat is out of the water or on a trailer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 520041-1 fit any garboard drain fitting?\u003c\/strong\u003e It is sized to a 1\/2 inch NPT thread, so it fits garboard drain fittings machined to that same 1\/2 inch NPT thread size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sea-Dog part or an aftermarket copy?\u003c\/strong\u003e The 520041-1 is a genuine Sea-Dog manufactured replacement plug, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the Sea-Dog 520041-1?\u003c\/strong\u003e The package contains the machined bronze replacement plug itself; it does not include a wrench or the garboard drain body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 520041-1 corrode in salt water?\u003c\/strong\u003e Because it is machined bronze, the 520041-1 plug is built to resist the corrosive effects of both salt water and fresh water marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 520041-1 to replace a lost or damaged garboard drain plug?\u003c\/strong\u003e Yes, the Sea-Dog 520041-1 is intended specifically as a replacement plug for garboard drain fittings that need a new plug.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825190619,"sku":"S-D-520041-1","price":6.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5244.jpg?v=1784429696"},{"product_id":"sea-dog-520040-1-garboard-drain-plug-machined-bronze-1-2-npt-thread-2-flange","title":"Sea-Dog Garboard Drain and Plug 520040-1, 2 Inch Machined Bronze, 1\/2 Inch NPT","description":"\u003cp\u003eThe Sea-Dog Garboard Drain and Plug (520040-1) is a traditional-style bronze drain fitting designed for mounting through the transom or hull garboard area to let water drain from the bilge when the boat is out of the water. It is machined from bronze for corrosion resistance in a marine environment and features a 2 inch diameter body with a 1\/2 inch NPT thread size, allowing it to thread into a matching garboard drain fitting or hull opening. The plug is installed and removed with a standard #8 flat head (FH) fastener, which secures the plug in place while the boat is underway and allows it to be backed out for draining. This is a single-piece plug and body assembly, sold as one item, and is intended for boaters who need a reliable, low-maintenance drain point for bilge water removal during storage or trailering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520040-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Machined Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/2 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #8 FH (fastener not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e As Shown\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.29 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal-fit garboard drain and plug intended for hulls with a 2 inch diameter, 1\/2 inch NPT garboard drain opening; it is not tied to a specific boat make or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 520040-1 Garboard Drain and Plug used for?\u003c\/strong\u003e It is a bronze drain fitting that threads into the garboard area of the hull, letting bilge water drain out when the boat is stored or trailered, and sealing the opening with the plug when underway.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog garboard drain 520040-1?\u003c\/strong\u003e The body diameter is 2 inches, with a 1\/2 inch NPT thread size for installation into a matching drain opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 520040-1 garboard drain and plug made from?\u003c\/strong\u003e It is machined from bronze, chosen for its corrosion resistance in saltwater and freshwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 520040-1 come with mounting fasteners?\u003c\/strong\u003e No, the fastener is not included; the plug uses a #8 FH (flat head) fastener that must be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog garboard drain and plug weigh?\u003c\/strong\u003e The Sea-Dog 520040-1 weighs 0.29 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 520040-1 sold as a single unit?\u003c\/strong\u003e Yes, it is sold as one complete drain and plug assembly, with a quantity of 1 item per unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this garboard drain plug specific to one boat brand or model?\u003c\/strong\u003e No, the Sea-Dog 520040-1 is a universal-fit fitting sized for a 2 inch, 1\/2 inch NPT garboard drain opening rather than a specific boat make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type does the 520040-1 garboard plug use?\u003c\/strong\u003e It uses a 1\/2 inch NPT (National Pipe Taper) thread for installation into the drain body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the plug on the Sea-Dog 520040-1 be removed for draining and reinstalled?\u003c\/strong\u003e Yes, the bronze plug is designed to be threaded out to allow bilge water to drain and reinstalled to seal the opening when the boat is in the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Sea-Dog garboard drain 520040-1 have?\u003c\/strong\u003e It has an as-shown bronze finish, consistent with the machined bronze construction of the part.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825419995,"sku":"S-D-520040-1","price":14.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5244_eae7878c-1332-43d1-b0d4-3677a2b5e0fe.jpg?v=1784429705"},{"product_id":"sea-dog-plugmate-garboard-drain-plug-wrench-with-bronze-replacement-plug-fits-standard-t-style-plugs-520045-1","title":"Sea-Dog Plugmate Garboard Plug Wrench with Replacement Plug, Fits Standard and T-Style Garboard Plugs, 520045-1","description":"\u003cp\u003eThe Sea-Dog Plugmate garboard plug wrench (520045-1) is a multi-key tool built to remove and install garboard drain plugs during haul-out and winterizing. Its multiple deck keys are shaped to fit standard garboard plugs as well as \"T\" style plugs, so one wrench covers both common plug styles found on boat hulls, including Sea-Dog garboard plugs 520041 and 520043. The wrench body is constructed of durable injection molded polycarbonate, paired with a machined bronze plug for corrosion resistance where it contacts the drain fitting. The 520045-1 version stores one replacement garboard plug directly inside the wrench handle, so a spare plug is always on hand if the original is lost or damaged during haul-out. This differs from the base 520045 wrench, which is sold as wrench-only with no plug included. Custom colors are available upon request from the manufacturer. This tool is intended for general boat maintenance use around the garboard drain and is not specific to any single boat make, model, or engine.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520045-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Garboard Plug Wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded Polycarbonate Handle with Machined Bronze Plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e One Replacement Garboard Plug Stored in Handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Standard and T-Style Garboard Plugs, Including Sea-Dog 520041 and 520043\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.262 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514521512\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 520045-1 used for?\u003c\/strong\u003e The Sea-Dog 520045-1 is a Plugmate garboard plug wrench used to remove and install garboard drain plugs, most commonly during haul-out when draining the bilge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 520045-1 include a replacement plug?\u003c\/strong\u003e Yes, the 520045-1 stores one replacement garboard plug inside the wrench handle, unlike the base 520045 wrench which is sold without a plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 520045 and 520045-1?\u003c\/strong\u003e The 520045 is the wrench only with no plug included, while the 520045-1 comes with one replacement garboard plug stored in the handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat styles of garboard plugs does this wrench fit?\u003c\/strong\u003e The Sea-Dog Plugmate wrench fits standard garboard plugs as well as \"T\" style plugs, including Sea-Dog garboard plugs 520041 and 520043.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the wrench made of?\u003c\/strong\u003e The 520045-1 wrench handle is constructed of durable injection molded polycarbonate, and it comes with a machined bronze plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 520045-1 weigh?\u003c\/strong\u003e The Sea-Dog 520045-1 garboard plug wrench weighs 0.262 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 520045-1 wrench be ordered in different colors?\u003c\/strong\u003e Custom colors for the Sea-Dog Plugmate wrench (520045-1) are available upon request.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the wrench have multiple deck keys?\u003c\/strong\u003e Yes, the Plugmate 520045-1 features multiple deck keys designed to work with various garboard plug styles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the replacement plug included with the 520045-1 removable?\u003c\/strong\u003e The replacement plug included with the 520045-1 is stored in the wrench handle, ready to use as a spare when the installed garboard plug needs replacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 520045-1?\u003c\/strong\u003e The 520045-1 package includes the Plugmate garboard wrench with one replacement garboard plug stored in the handle.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825452763,"sku":"S-D-520045-1","price":14.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5247.jpg?v=1784429711"},{"product_id":"sea-dog-520060-1-captive-garboard-drain-plug-316-stainless-steel-replaces-bronze-520040-520042","title":"Sea-Dog Captive Garboard Drain \u0026 Plug 520060-1, 316 Stainless Steel, Replaces 520040\/520042","description":"\u003cp\u003eThe Sea-Dog Captive Garboard Drain \u0026amp; Plug (520060-1) is a boat hull garboard drain and plug assembly built from investment cast 316 stainless steel for strong resistance to saltwater corrosion. It is designed as a direct replacement for the bronze, traditional style Sea-Dog Garboard drains 520040 and 520042, giving boat owners a corrosion-resistant upgrade path for an existing hull fitting.\u003c\/p\u003e\u003cp\u003eThe plug is captive to the drain housing, so it cannot be dropped or lost overboard when opened to drain the bilge or closed to keep water out while underway. The assembly measures 2 inches, 1-1\/8 inches, 1\/2 inch, and 2-5\/8 inches across its key mounting points and installs with three #8 flat head fasteners (fasteners not included). Replacement plug-and-gasket and gasket-only parts are also available separately for ongoing maintenance of this drain.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520060-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Captive Garboard Drain \u0026amp; Plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #8 FH (flat head), 3 required (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 2-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.338 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 4.7 cm (L) x 9.7 cm (W) x 13.8 cm (H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514521550\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e520040\u003c\/li\u003e\n\u003cli\u003e520042\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 520060-1 made of?\u003c\/strong\u003e Investment cast 316 stainless steel makes up the Sea-Dog Captive Garboard Drain \u0026amp; Plug (520060-1), giving it strong resistance to saltwater corrosion compared to older bronze designs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the plug stay attached to the drain housing?\u003c\/strong\u003e Yes, the 520060-1 uses a captive plug design, so the plug cannot be separated and lost overboard when it is opened for draining.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sea-Dog 520060-1 replace?\u003c\/strong\u003e This part is a direct replacement for the bronze, traditional style Sea-Dog Garboard drains 520040 and 520042.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this garboard drain?\u003c\/strong\u003e The Sea-Dog Captive Garboard Drain \u0026amp; Plug, part number 520060-1, measures 2 inches, 1-1\/8 inches, 1\/2 inch, and 2-5\/8 inches across its key mounting points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 520060-1 installed?\u003c\/strong\u003e Three #8 flat head fasteners secure the drain and plug in place on the hull; the fasteners are not included with the 520060-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this part weigh?\u003c\/strong\u003e 0.338 pounds is the weight of the Sea-Dog Captive Garboard Drain \u0026amp; Plug, part number 520060-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the round and oblong Sea-Dog garboard drains?\u003c\/strong\u003e The 520060-1 is the standard captive garboard drain and plug, while the separate Oblong Captive Garboard Drain \u0026amp; Plug (520065-1) sits lower in the stern for more water removal; these are distinct part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre replacement plugs or gaskets available separately for this drain?\u003c\/strong\u003e Yes, a replacement plug and gasket set and a gasket-only option are sold separately for use with the Sea-Dog Captive Garboard Drain \u0026amp; Plug 520060-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this drain plug genuine Sea-Dog or aftermarket?\u003c\/strong\u003e This is a genuine Sea-Dog product, part number 520060-1, made as the stainless steel upgrade to Sea-Dog's earlier bronze garboard drains.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 520060-1?\u003c\/strong\u003e The Sea-Dog 520060-1 includes the captive garboard drain housing with its attached plug; the three #8 flat head mounting fasteners are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this drain fit any boat hull?\u003c\/strong\u003e The Sea-Dog Captive Garboard Drain \u0026amp; Plug (520060-1) is a hull fitting that mounts with three #8 flat head fasteners and is not tied to a specific boat make or model.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825714907,"sku":"S-D-520060-1","price":23.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/8085.jpg?v=1784429720"},{"product_id":"sea-dog-520047-1-bronze-garboard-drain-t-handle-replacement-plug-3-4-npt-fits-garboard-drain-520046","title":"Sea-Dog Garboard Drain T-Handle Plug 520047-1, 3\/4 Inch NPT, Die Cast Bronze, Replaces 520046-1","description":"\u003cp\u003eThe Sea-Dog Garboard Drain T-Handle Plug (520047-1) is a die cast bronze plug built to seal the garboard drain opening in a boat hull during use and provide quick, tool-free drainage at haul-out. The plug uses a 3\/4 inch NPT tapered thread, which draws down tighter as it is turned in to create a watertight seal against the hull fitting without requiring a separate gasket or sealant. A T-handle head lets the plug be hand-tightened and removed without wrenches or tools, which is useful when a boat needs to be drained quickly on a trailer or in dry storage. Bronze construction resists the corrosion that saltwater and constant wet\/dry cycling cause in plain steel hardware, making it suited to long-term use in a through-hull drain location. The plug measures 3-1\/2 inches overall with a 3\/4 inch NPT thread size, and is designed as a direct fit for garboard drain fittings machined to that same 3\/4 inch NPT thread. It is intended as a replacement plug and is cross-referenced to Sea-Dog part number 520046-1.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520047-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Garboard Drain T-Handle Plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Die Cast Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/4 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 3-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.466 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal Type:\u003c\/strong\u003e Tapered NPT thread, watertight\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits garboard drain openings machined with a 3\/4 inch NPT thread.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e520046-1\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does the Sea-Dog 520047-1 garboard drain plug use?\u003c\/strong\u003e The Sea-Dog 520047-1 uses a 3\/4 inch NPT tapered thread, which draws tight as it is screwed in to create a watertight seal in the garboard drain fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 520047-1 plug made of metal or plastic?\u003c\/strong\u003e It is die cast bronze, chosen for its resistance to corrosion in the wet, saltwater-exposed environment of a garboard drain opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this plug require tools to install or remove?\u003c\/strong\u003e No tools are needed. The 520047-1 has a T-handle design so it can be hand-tightened and removed by hand, which is convenient for quick draining at haul-out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 520047-1 replace?\u003c\/strong\u003e The Sea-Dog 520047-1 is cross-referenced as a replacement for Sea-Dog part number 520046-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the 520047-1 plug overall?\u003c\/strong\u003e It measures 3-1\/2 inches overall with a 3\/4 inch NPT thread section.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 520047-1 garboard drain plug weigh?\u003c\/strong\u003e It weighs 0.466 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 520047-1 plug need a separate gasket or sealant to seal properly?\u003c\/strong\u003e No separate gasket is required. The 3\/4 inch NPT tapered thread on the 520047-1 is designed to provide a watertight seal on its own as it is tightened into the drain fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a garboard drain plug used for?\u003c\/strong\u003e A garboard drain plug like the 520047-1 seals the garboard drain opening in a boat hull and is removed to let bilge water drain out during haul-out or storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 520047-1 plug bronze or nylon?\u003c\/strong\u003e The 520047-1 is die cast bronze. Sea-Dog also offers nylon garboard drain and plug assemblies as a lighter-duty alternative, but the 520047-1 itself is metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 520047-1 fit any garboard drain opening?\u003c\/strong\u003e It fits garboard drain openings that are machined with a 3\/4 inch NPT thread, matching the thread size of this plug.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825747675,"sku":"S-D-520047-1","price":15.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7268.jpg?v=1784429720"},{"product_id":"sea-dog-520290-1-drain-tube-flaring-tool-for-1-brass-and-aluminum-drain-tubes","title":"Sea-Dog Drain Tube Flaring Tool, 1 Inch, Stainless Steel\/Zinc Plated Steel - 520290-1","description":"\u003cp\u003eThe Sea-Dog Drain Tube Flaring Tool (520290-1) is a purpose-built hand tool for installing 1 inch drain tubes on boats. It is used to flare the end of a drain tube so it seats and seals properly in motor wells, livewells, baitwells, and other bulkhead drain applications. The tool works with all Sea-Dog Drain Tubes in the 520210-520430 range, making it a handy, compact addition to any boat toolbox or rigging kit.\u003c\/p\u003e\u003cp\u003eConstructed of stainless steel and zinc plated steel for corrosion resistance in a marine environment, this flaring tool is sized specifically for 1 inch diameter drain tube installations. A companion tool (520295-1, a separate part number) is sized for 1-1\/4 inch tubes, so it is important to select the 520290-1 for 1 inch tube work. Note that the drain tube itself is not included with this tool.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520290-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Drain Tube Flaring Tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\/Zinc Plated Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Dimension A):\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength (Dimension B):\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.544 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514521833\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Drain Tubes:\u003c\/strong\u003e Sea-Dog Drain Tubes 520210 through 520430\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size drain tube does the Sea-Dog 520290-1 flaring tool install?\u003c\/strong\u003e The Sea-Dog 520290-1 is sized for installing 1 inch drain tubes. A separate tool, the 520295-1, is sized for 1-1\/4 inch drain tubes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the drain tube included with this flaring tool?\u003c\/strong\u003e No, the drain tube is not included. The 520290-1 is the flaring tool only, used to install a 1 inch drain tube that is purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this tool made of?\u003c\/strong\u003e It is made of stainless steel and zinc plated steel, materials chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sea-Dog drain tubes can I install with the 520290-1?\u003c\/strong\u003e The 520290-1 flaring tool can be used to install any Sea-Dog Drain Tube in the 520210-520430 range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 520290-1 flaring tool weigh?\u003c\/strong\u003e It weighs 0.544 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the flaring tool?\u003c\/strong\u003e The 520290-1 measures 1 inch (dimension A) by 4 inches (dimension B).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 520290-1 and the 520295-1?\u003c\/strong\u003e The 520290-1 is sized for 1 inch drain tubes, while the 520295-1 is a separate part number sized for 1-1\/4 inch drain tubes. Choose the tool that matches the tube size you are installing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a drain tube flaring tool used for?\u003c\/strong\u003e A drain tube flaring tool, such as the Sea-Dog 520290-1, is used to flare the end of a drain tube during installation so it forms a proper seal in a bulkhead or hull opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this tool be used for boat motor well or livewell drains?\u003c\/strong\u003e Yes, the Sea-Dog 520290-1 is used to install drain tubes that remove water from motor wells, livewells, and baitwells.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 520290-1 a genuine Sea-Dog product?\u003c\/strong\u003e Yes, it is a genuine Sea-Dog part, identified by manufacturer part number 520290-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 520290-1 packaged?\u003c\/strong\u003e The Sea-Dog 520290-1 flaring tool ships as a standard pack of 1 each.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988826173659,"sku":"S-D-520290-1","price":25.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7176.jpg?v=1784429764"},{"product_id":"sea-dog-520230-1-formed-brass-drain-tube-1-id-x-2-7-8-transom-livewell-baitwell-motorwell-drain","title":"Sea-Dog Brass Drain Tube, 1 Inch x 2-7\/8 Inch, Part 520230-1","description":"\u003cp\u003eThe Sea-Dog Brass Drain Tube, part number 520230-1, is a formed brass drain fitting designed for transom, motorwell, livewell, and baitwell drain applications on boats. The tube is flanged 90 degrees on one end, which allows it to seat cleanly into the hull or compartment wall while directing water flow out through the opposite straight end. It is built for use with brass or stainless steel drain plugs, making it a common component in boat drain plug systems where a plug threads into the flanged end to seal the opening when not draining.\u003c\/p\u003e\u003cp\u003eThis drain tube has a 1 inch inside diameter and measures 2-7\/8 inches (dimension B) in length, with a formed brass construction that resists corrosion in marine environments. Installation requires a Drain Tube Flaring Tool (520290-1 or 520295-1), which is used to flare the tube end during fitting. The 1 inch diameter size shown here is part of a broader Sea-Dog Formed Drain Tube lineup that is also available in a 1-1\/4 inch diameter, so boat owners should confirm the correct inside diameter for their existing drain plug or fitting before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520230-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength (Dimension B):\u003c\/strong\u003e 2-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.108 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Formed brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Style:\u003c\/strong\u003e 90 degree flanged on one end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Drain Plug Types:\u003c\/strong\u003e Brass or stainless steel drain plugs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired Installation Tool:\u003c\/strong\u003e Drain Tube Flaring Tool (520290-1 or 520295-1)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for transom, motorwell, livewell, and baitwell drain applications; universal fit based on 1 inch inside diameter rather than a specific boat make or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the inside diameter of the Sea-Dog 520230-1 drain tube?\u003c\/strong\u003e The Sea-Dog 520230-1 drain tube has a 1 inch inside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this drain tube?\u003c\/strong\u003e Part number 520230-1 measures 2-7\/8 inches, which is the tube's B dimension from the flanged end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog drain tube made from?\u003c\/strong\u003e It is constructed of formed brass, giving it corrosion resistance for marine drain applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this drain tube used for?\u003c\/strong\u003e Sea-Dog part 520230-1 is used as a drain for transom, motorwell, livewell, or baitwell applications on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this drain tube work with any drain plug?\u003c\/strong\u003e The 520230-1 drain tube is designed for use with brass or stainless steel drain plugs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a special tool to install this drain tube?\u003c\/strong\u003e Yes, installation of the Sea-Dog 520230-1 requires a Drain Tube Flaring Tool, either part 520290-1 or 520295-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the drain tube flanged on both ends?\u003c\/strong\u003e No, the 520230-1 is flanged 90 degrees on only one end; the other end is straight for flaring during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this drain tube available in other sizes?\u003c\/strong\u003e Sea-Dog offers this formed drain tube design in 1 inch and 1-1\/4 inch diameters; part 520230-1 is the 1 inch by 2-7\/8 inch version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 520230-1 drain tube weigh?\u003c\/strong\u003e This drain tube weighs 0.108 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does this drain tube have?\u003c\/strong\u003e The 520230-1 has a natural brass finish, consistent with its formed brass construction.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988826271963,"sku":"S-D-520230-1","price":5.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5268.jpg?v=1784429771"},{"product_id":"sea-dog-520320-1-hdpe-motorwell-drain-tube-1-hole-adjustable-3-4-to-2-1-2-bulkhead-white","title":"Sea-Dog Drain Tube 520320-1, HDPE, White, Adjustable for Motorwell, Livewell, and Baitwell Drains","description":"\u003cp\u003eThe Sea-Dog Drain Tube (520320-1) removes water and other fluids from motor wells, livewells, and baitwells, giving boat owners a simple, leak-proof way to keep these compartments dry. It is constructed of durable, impact-resistant injection molded HDPE, a material chosen for its resistance to cracking and corrosion in the wet, high-exposure environments where drain fittings are used.\u003c\/p\u003e\u003cp\u003eThe tube is flanged 90 degrees on one end and is designed to fit standard 1 inch diameter mounting holes, giving it a clean, finished look once installed. Its adjustable length accommodates bulkhead installations ranging from 3\/4 inch up to 2-1\/2 inches thick, so it fits a range of deck and hull thicknesses without needing to be cut or modified. A locking drain tube nut threads down to create a tight, leak-proof seal against the bulkhead, and because the tube telescopes to length, no flaring tools are needed during installation, which saves setup time compared to fixed-length tubing.\u003c\/p\u003e\u003cp\u003eThis drain tube is designed for use with snap handle and T-handle drain plugs, making it a straightforward fit for common livewell and baitwell drain plug setups. It is finished in white; Sea-Dog also offers this same drain tube design in black ABS for buyers who want a different material or color to match their boat's fittings.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 520320-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE (High-Density Polyethylene)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulkhead Thickness Range:\u003c\/strong\u003e 3\/4 inch to 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall Thickness:\u003c\/strong\u003e 0.110 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.044 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514520560\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 520320-1 drain tube used for?\u003c\/strong\u003e It removes water and other fluids from motor wells, livewells, and baitwells, draining them through a standard 1 inch mounting hole in the bulkhead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size bulkhead thickness does this drain tube fit?\u003c\/strong\u003e The Sea-Dog 520320-1 has an adjustable length that fits bulkhead installations from 3\/4 inch up to 2-1\/2 inches thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole do I need to drill for installation?\u003c\/strong\u003e This drain tube is designed to fit a standard 1 inch diameter mounting hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 520320-1 drain tube made from?\u003c\/strong\u003e It is made from durable, impact-resistant injection molded HDPE (high-density polyethylene).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this drain tube come in a color other than white?\u003c\/strong\u003e The 520320-1 is finished in white; Sea-Dog also makes the same drain tube design in black ABS as a separate part number for buyers who prefer that color and material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need flaring tools to install this drain tube?\u003c\/strong\u003e No flaring tools are needed. The adjustable-length design of the Sea-Dog drain tube lets you fit it to your bulkhead thickness without cutting or flaring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the drain tube leak-proof once installed?\u003c\/strong\u003e Yes. A locking drain tube nut threads down onto the tube to create a tight, leak-proof seal against the bulkhead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of drain plug works with this tube?\u003c\/strong\u003e The Sea-Dog 520320-1 is designed for use with snap handle and T-handle drain plugs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the overall length and diameter of this drain tube?\u003c\/strong\u003e The 520320-1 has an overall length of 2.5 inches and an outside diameter of 1.25 inches, with a nominal wall thickness of 0.110 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 520320-1 drain tube weigh?\u003c\/strong\u003e It weighs 0.044 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this drain tube flanged on both ends?\u003c\/strong\u003e No, the Sea-Dog 520320-1 is flanged 90 degrees on only one end, which sits against the bulkhead once installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this drain tube be used in a baitwell as well as a motor well?\u003c\/strong\u003e Yes, the 520320-1 is designed for use in motor wells, livewells, and baitwells alike.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988826370267,"sku":"S-D-520320-1","price":3.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5273.jpg?v=1784429779"},{"product_id":"attwood-11596-2-manual-hand-bilge-pump-with-32-inch-hose-24-inch-8-gpm-portable-boat-bailer","title":"Attwood Hand Bilge Pump 11596-2, 24 Inch Manual Pump with 32 Inch Hose","description":"\u003cp\u003eThe Attwood 11596-2 is a 24-inch handheld hand bilge pump built for fast, battery-free water removal aboard small boats and other watercraft. Operated entirely by hand, it moves up to 8 gallons per minute with a few quick pump strokes, making it a dependable emergency backup for clearing bilge water, rain accumulation, or splashback when an electric pump is unavailable or fails. The pump includes a flexible 32-inch removable discharge hose that directs water away from the boat, over a gunwale, or into a bucket, keeping the discharge line clear of the operator and minimizing splashback. An ergonomic T-handle provides a secure, comfortable grip that reduces hand fatigue during extended use, even when the handle is wet.\u003c\/p\u003e\u003cp\u003eConstructed from lightweight, impact-resistant plastic in white and blue, the 11596-2 is built to withstand repeated, rugged use season after season without cracking. Because it requires no power source, it is equally useful as a portable siphon and dewatering tool for kayaks, canoes, dinghies, and other small craft, as well as for pumping out flooded basements, window wells, pool covers, and hot tubs. Rated for a maximum head (lift height) of 4 feet, it is sized for typical small-boat bilge and general dewatering tasks. Its compact, portable design allows it to be stowed easily and deployed quickly when needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11596-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hand Bilge Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Length:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Head:\u003c\/strong\u003e 4 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 8 gallons per minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Manual (no batteries or electricity required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Type:\u003c\/strong\u003e Ergonomic T-handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\/Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5.08 inches L x 24.13 inches W x 72.39 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697115966\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Warranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much water does the Attwood 11596-2 hand bilge pump move?\u003c\/strong\u003e The 11596-2 moves up to 8 gallons per minute with a few quick pump strokes, using only hand power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 11596-2 require batteries or an electrical connection?\u003c\/strong\u003e No. This hand bilge pump is entirely manually operated and needs no batteries, wiring, or electricity, making it a reliable backup if an electric bilge pump fails.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the pump and how long is the included hose?\u003c\/strong\u003e The Attwood 11596-2 is a 24-inch handheld pump and comes with a 32-inch flexible, removable discharge hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum lift height (head) for this pump?\u003c\/strong\u003e The 11596-2 is rated for a maximum head of 4 feet, meaning it can lift water up that height through the discharge hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 11596-2 pump made of?\u003c\/strong\u003e It is constructed of lightweight, impact-resistant plastic designed to hold up to rugged use without cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the hose be removed from the Attwood 11596-2?\u003c\/strong\u003e Yes, the 32-inch discharge hose on the 11596-2 is removable, allowing the water to be directed over a gunwale, out a window, or into a bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood hand bilge pump comfortable to use for extended pumping?\u003c\/strong\u003e The 11596-2 has an ergonomic T-handle that provides a secure, slip-resistant grip and helps reduce hand fatigue, even when wet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat can the 11596-2 be used for besides boat bilges?\u003c\/strong\u003e Beyond clearing bilge water on kayaks, canoes, and dinghies, this manual pump can also dewater flooded basements, window wells, pool covers, and hot tubs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Attwood 11596-2 hand bilge pump?\u003c\/strong\u003e The 11596-2 is finished in white with blue accents.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 11596-2 weigh?\u003c\/strong\u003e The 11596-2 hand bilge pump weighs 1.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11596-2 suitable as an emergency dewatering tool?\u003c\/strong\u003e Yes, because it works without power, the 11596-2 serves as a reliable emergency safety tool for marine use, power outages, and severe weather flooding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the warranty on the Attwood 11596-2?\u003c\/strong\u003e The 11596-2 is backed by a 90-day manufacturer warranty.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989664510171,"sku":"ATT-11596-2","price":31.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Attwood_Hand_Bilge_Pump_with_32inch_hose__96549.1722495760.500.750.jpg?v=1785188259"},{"product_id":"attwood-3874-3-thru-hull-connector-fitting-white-polypropylene-fits-1-1-8-to-1-1-4-i-d-hose","title":"Attwood 3874-3 Polypropylene Thru-Hull Connector Fitting, White, Fits 1-1\/8 to 1-1\/4 Inch ID Hose","description":"\u003cp\u003eThe Attwood 3874-3 is a polypropylene thru-hull connector fitting used to route a hose through a boat hull wall while maintaining a secure, water-resistant seal at the penetration point. It is built for below-waterline and above-waterline plumbing runs such as bailers, livewells, washdowns, and drain lines where a hose must pass cleanly through the hull. The fitting is molded from polypropylene for corrosion resistance in a marine environment and finished in white to blend with typical hull and deck gelcoat colors.\u003c\/p\u003e\u003cp\u003eThis connector accepts hose with an inside diameter of 1-1\/8 inch to 1-1\/4 inch and has a stem length of 3-1\/4 inch, making it suitable for hull sections up to 1-1\/4 inch in maximum thickness. Installation requires a 1-3\/8 inch hole drilled through the hull. The one-piece design allows the hose to be clamped directly to the stem on the interior side while the fitting body seats against the exterior hull surface, giving installers a straightforward through-hull hose connection without additional adapters.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 3874-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Inside Diameter:\u003c\/strong\u003e 1-1\/8 inch to 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Length:\u003c\/strong\u003e 3-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Hull Thickness:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Hole Diameter:\u003c\/strong\u003e 1-3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2683 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Attwood 3874-3 thru-hull fitting accept?\u003c\/strong\u003e The 3874-3 accepts hose with an inside diameter of 1-1\/8 inch to 1-1\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat diameter hole do I need to drill in the hull to install this fitting?\u003c\/strong\u003e Installing the Attwood 3874-3 requires a 1-3\/8 inch installation hole through the hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick a hull can the 3874-3 fitting be used on?\u003c\/strong\u003e This fitting is rated for hulls up to 1-1\/4 inch in maximum thickness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the stem length of the Attwood 3874-3?\u003c\/strong\u003e The stem length is 3-1\/4 inch, measured from the fitting body to the end of the hose barb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 3874-3 thru-hull fitting made from?\u003c\/strong\u003e It is made from polypropylene, a corrosion-resistant plastic suited to marine hull fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 3874-3 fitting?\u003c\/strong\u003e The 3874-3 has a white finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 3874-3 be used for a bailer or livewell drain line?\u003c\/strong\u003e Yes, it functions as a general-purpose thru-hull hose connector suitable for bailer, livewell, washdown, or drain hose runs that pass through the hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 3874-3 weigh?\u003c\/strong\u003e The Attwood 3874-3 weighs 0.2683 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 3874-3 come with a hose clamp?\u003c\/strong\u003e The fitting itself is the thru-hull connector body; a separate hose clamp is used on the interior side to secure the hose to the stem.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 3874-3 differ from the Attwood 3874-1?\u003c\/strong\u003e The 3874-3 and 3874-1 are both white polypropylene thru-hull connectors in the same 3874 series but are separate part numbers, so the correct one should be selected by part number to match the required hose and hull dimensions.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989669032155,"sku":"ATT-3874-3","price":8.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61kluwQrksL.jpg?v=1784486754"},{"product_id":"attwood-3873-3-thru-hull-fitting-white-fits-3-4-id-hose","title":"Attwood Thru-Hull Fitting for 3\/4 Inch Hose, White, 3873-3","description":"\u003cp\u003eThe attwood 3873-3 is a thru-hull fitting designed to create a secure, reliable connection point where plumbing or drainage hose passes through a boat's hull. Built in white polypropylene, it resists corrosion and UV exposure better than metal alternatives, making it well suited to bilge pump discharge, livewell drains, washdown lines, and other below-waterline plumbing runs. The fitting is sized for 3\/4 inch inside diameter hose, with a stem length of 3-1\/4 inches to pass through hull material and a flange diameter of 2-1\/4 inches to seat against the hull surface and spread clamping load evenly. It accommodates a maximum hull thickness of 1-1\/4 inches, covering typical fiberglass and composite hull sections found on small to mid-size boats.\u003c\/p\u003e\u003cp\u003eInstallation follows standard thru-hull practice: the stem passes through a drilled hole in the hull, the flange seats against the exterior or interior surface with appropriate marine sealant, and the hose clamps directly onto the barbed stem. The white finish blends with common hull gelcoat colors, and the polypropylene construction is lightweight, will not corrode, and holds up to continuous exposure to fresh and salt water.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 3873-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Thru-Hull Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Inside Diameter:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Length:\u003c\/strong\u003e 3-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Hull Thickness:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Diameter:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the attwood 3873-3 thru-hull fitting fit?\u003c\/strong\u003e The attwood 3873-3 is sized for 3\/4 inch inside diameter hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum hull thickness this fitting can be used with?\u003c\/strong\u003e The 3873-3 accommodates hulls up to 1-1\/4 inches thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the stem on this thru-hull fitting?\u003c\/strong\u003e Stem length is 3-1\/4 inches, which is the portion that passes through the hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flange diameter of the attwood 3873-3?\u003c\/strong\u003e The flange measures 2-1\/4 inches in diameter, providing the seating surface against the hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the attwood 3873-3 thru-hull fitting made from?\u003c\/strong\u003e It is made from polypropylene, a corrosion-resistant, lightweight plastic suited to marine plumbing use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this thru-hull fitting?\u003c\/strong\u003e The 3873-3 is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the attwood 3873-3 weigh?\u003c\/strong\u003e It weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a thru-hull fitting used for?\u003c\/strong\u003e A thru-hull fitting like the 3873-3 provides a sealed passage point through the boat's hull for plumbing lines such as bilge pump discharge, livewell drains, or washdown hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the attwood 3873-3 require sealant during installation?\u003c\/strong\u003e Yes, standard thru-hull installation calls for marine sealant between the flange and hull surface to prevent water intrusion; the fitting itself does not include sealant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the attwood 3873-3 corrode over time in saltwater use?\u003c\/strong\u003e No, because it is made of polypropylene rather than metal, the 3873-3 will not corrode in fresh or saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the hose clamped directly onto the attwood 3873-3?\u003c\/strong\u003e Yes, the stem is barbed so 3\/4 inch inside diameter hose can be pushed on and secured with a hose clamp.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989669130459,"sku":"ATT-3873-3","price":4.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71rAHCSFXzL.jpg?v=1784486758"},{"product_id":"attwood-4116-5-complete-bilge-pump-plumbing-kit-3-4-i-d-pump-not-included","title":"Attwood Complete Bilge Pump Installation Kit, 3\/4 Inch Hose I.D., Pump Not Included","description":"\u003cp\u003eThe Attwood 4116-5 is a complete bilge pump installation kit built around 3\/4 inch inside diameter hose. The pump itself is not included in this kit, making it the right choice for boat owners who already own a compatible bilge pump and need the supporting installation hardware sized to match a 3\/4 inch pump outlet. This kit is part of Attwood's pump kits and accessories lineup, which also includes versions bundled with a Tsunami T-500 bilge pump and hose-only options for owners doing a simple hose replacement.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4116-5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Type:\u003c\/strong\u003e Complete kit, pump not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Inside Diameter:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.295 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697411655\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 4116-5 kit include a bilge pump?\u003c\/strong\u003e No, the Attwood 4116-5 is a complete installation kit sold without a bilge pump; the pump must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the Attwood 4116-5 kit use?\u003c\/strong\u003e This kit is built around 3\/4 inch inside diameter hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 4116-5 kit weigh?\u003c\/strong\u003e The Attwood 4116-5 bilge pump installation kit weighs 1.295 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes part number 4116-5?\u003c\/strong\u003e Part number 4116-5 is made by Attwood.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a version of this kit that comes with a pump included?\u003c\/strong\u003e Yes, Attwood offers a complete kit with a Tsunami T-500 bilge pump included, which also uses 3\/4 inch I.D. Hose, as an alternative to the pump-less 4116-5 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 4116-5 kit?\u003c\/strong\u003e The UPC for the Attwood 4116-5 kit is 022697411655.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is the Attwood 4116-5?\u003c\/strong\u003e The Attwood 4116-5 is listed under Attwood bilge pump kits and accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the hose without the rest of the kit?\u003c\/strong\u003e Attwood offers hose-only options separately from the 4116-5 complete kit for owners who only need replacement hose.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989669163227,"sku":"ATT-4116-5","price":54.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Attwood_Bilge_Pump_Installation_Kit_All_Components__79808.1722370472.500.750.jpg?v=1785329070"},{"product_id":"attwood-3876-3-thru-transom-scupper-valve-kit-for-1-1-2-hose-self-bailing-cockpit-drain-above-waterline","title":"Attwood 3876-3 Thru-Transom Scupper Valve with Flapper, Acetal, for 1-1\/2 Inch I.D. Hose","description":"\u003cp\u003eThe Attwood 3876-3 is a thru-transom scupper valve built for self-bailing cockpits. Its rubber flapper opens under water pressure to let cockpit water drain overboard, then closes to stop water from washing back in through the same opening. The valve body is molded from Acetal, a rigid, corrosion-resistant plastic that holds up well against saltwater and UV exposure, and it is sized to connect to 1-1\/2 inch I.D. Hose. It is designed to be mounted over an existing thru-hull fitting of up to 2 inches, and the assembly itself has an overall diameter of 2-7\/8 inches.\u003c\/p\u003e\u003cp\u003eThe kit includes everything needed for the install: a corrosion-resistant retainer ring, mounting screws, the rubber flapper valve, and a gasket, for four pieces total in the box. This is a simple, one-way check valve setup, meaning it only allows water to flow in one direction, out of the boat, protecting the cockpit from backwash while underway or at rest. Installation is intended for above the waterline only; as with other plastic thru-hull connectors, it is not designed for below-waterline use. This makes it well suited for boats with self-bailing cockpit decks that need a reliable, low-maintenance drain valve that will not corrode like metal alternatives.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 3876-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Thru-Transom Scupper Valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Acetal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Check valve (flapper style)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Connection:\u003c\/strong\u003e For 1-1\/2 inch I.D. Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThru-Hull Mounting Fitting Size:\u003c\/strong\u003e Up to 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Diameter:\u003c\/strong\u003e 2-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4.5 x 9.25 x 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Above the waterline only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Retainer ring, mounting screws, rubber flapper valve, gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697387639\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Attwood 3876-3 scupper valve do?\u003c\/strong\u003e It drains water out of a self-bailing cockpit through a rubber flapper that opens under water pressure to let water flow out, then closes to prevent water from washing back in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the 3876-3 fit?\u003c\/strong\u003e The Attwood 3876-3 is sized for 1-1\/2 inch I.D. Hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this valve be installed below the waterline?\u003c\/strong\u003e No. Like other plastic thru-hull connectors, the 3876-3 is designed for installation above the waterline only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the scupper valve made of?\u003c\/strong\u003e The 3876-3 body and flapper assembly are made of Acetal, a rigid plastic that resists corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 3876-3?\u003c\/strong\u003e The kit ships with a retainer ring, mounting screws, the rubber flapper valve, and a gasket, four pieces in total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size thru-hull fitting does the 3876-3 mount over?\u003c\/strong\u003e It is designed to be mounted over an existing thru-hull fitting of up to 2 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is the Attwood 3876-3 overall?\u003c\/strong\u003e The assembly has an overall diameter of 2-7\/8 inches, with item dimensions of 4.5 x 9.25 x 3.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 3876-3 a one-way valve?\u003c\/strong\u003e Yes, it functions as a check valve: the rubber flapper opens to let water drain out and closes to block backwash, allowing flow in one direction only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 3876-3 weigh?\u003c\/strong\u003e The scupper valve weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 3876-3 a genuine Attwood part?\u003c\/strong\u003e Yes, the 3876-3 is a genuine Attwood scupper valve, part of Attwood's thru-transom valve lineup for self-bailing cockpits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the 3876-3 scupper valve suitable for?\u003c\/strong\u003e It is intended for boats with self-bailing cockpit decks that need a thru-transom drain valve mounted above the waterline.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989669261531,"sku":"ATT-3876-3","price":11.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-3876-3_large__57113.1558177599.500.750.jpg?v=1785188410"},{"product_id":"attwood-4125-7-adjustable-livewell-spray-head-for-3-4-inch-id-hose","title":"Attwood 4125-7 Adjustable Livewell Spray Head, 3\/4 Inch Hose ID","description":"\u003cp\u003eThe Attwood 4125-7 is an adjustable spray head designed to aerate livewell water and keep bait healthier for longer trips. It mounts on the side of the tank and connects to a 3\/4 inch inside diameter hose, delivering a directional spray that boosts dissolved oxygen levels inside the livewell. Because the head is adjustable, you can angle the spray to suit your tank layout rather than being locked into a fixed spray pattern.\u003c\/p\u003e\u003cp\u003eConstructed of polished polypropylene, the 4125-7 resists the corrosion and UV degradation that can affect livewell fittings exposed to constant moisture and sunlight. It is built to fit tanks with a maximum 5\/8 inch tank wall thickness, and it meets ANSI 372 and NSF 61 specifications, standards relevant to marine plumbing fittings that contact water. The compact one-piece design makes it a straightforward addition or replacement for anglers maintaining a livewell aeration or recirculation system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4125-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Adjustable Spray Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification Met:\u003c\/strong\u003e ANSI 372, NSF 61\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Inside Diameter:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Tank Wall Thickness:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2333 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697412539\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for mounting on the side of livewell tanks with a wall thickness up to 5\/8 inch, using 3\/4 inch inside diameter hose.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the Attwood 4125-7 spray head use?\u003c\/strong\u003e The Attwood 4125-7 is built for 3\/4 inch inside diameter hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 4125-7 spray head adjustable?\u003c\/strong\u003e Yes, the 4125-7 is Attwood's adjustable spray head, letting you angle the spray direction inside the livewell rather than relying on a fixed pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 4125-7 made from?\u003c\/strong\u003e It is made of polished polypropylene, chosen for its resistance to corrosion and UV exposure in a wet livewell environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick can the tank wall be for this spray head to fit?\u003c\/strong\u003e The 4125-7 is designed for tanks with a maximum wall thickness of 5\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does the 4125-7 mount on a livewell tank?\u003c\/strong\u003e It is intended for mounting on the side of the livewell tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 4125-7 meet any industry standards?\u003c\/strong\u003e It meets ANSI 372 and NSF 61 specifications, which apply to marine plumbing components in contact with water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 4125-7 spray head weigh?\u003c\/strong\u003e The Attwood 4125-7 weighs 0.2333 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the finish on the Attwood 4125-7?\u003c\/strong\u003e It has a polished finish on its polypropylene body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 4125-7 be used with a recirculating pump?\u003c\/strong\u003e The 4125-7 is an adjustable spray head for aerating livewell water; Attwood's related double valve spray head design supports both fill and recirculating pump uses, so check your setup against the 4125-7's single adjustable spray function before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 4125-7 spray head?\u003c\/strong\u003e The UPC for the Attwood 4125-7 livewell spray head is 022697412539.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989669327067,"sku":"ATT-4125-7","price":9.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-4125-7_large__27700.1558177695.500.750.jpg?v=1785188929"},{"product_id":"attwood-4122-3-remote-mounting-bracket-for-3-4-aerator-hose-a-series-600-800-gph-livewell-pumps","title":"Attwood 4122-3 Remote Mounting Bracket for 3\/4 Inch Livewell Aerator Hose","description":"\u003cp\u003eThe Attwood 4122-3 is a remote mounting bracket built for 3\/4 inch diameter livewell aerator hose, designed for boaters who mount their aerator pump away from the livewell tank rather than through the transom. It is part of Attwood's livewell aerator hardware line, developed to keep bait and game fish alive and healthy for both weekend anglers and tournament fishermen. The bracket is molded from black plastic for corrosion resistance in the wet, high-vibration bilge environment where aerator plumbing typically runs.\u003c\/p\u003e\u003cp\u003eBecause it supports remote mounting, the 4122-3 gives installers flexibility on fiberglass and aluminum sport boats, letting the aerator pump be positioned away from the livewell itself while still routing 3\/4 inch hose cleanly to the tank. This suits built-in livewells on freshwater and saltwater fishing boats, and complements setups where the pump can alternatively be mounted directly through the transom. The compact design is intended for straightforward installation and easy access for maintenance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4122-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Remote Mounting Bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Diameter:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Remote Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4.5 x 9.25 x 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1333 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697412232\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for 3\/4 inch diameter aerator hose on built-in livewells found on fiberglass and aluminum sport boats, used in both freshwater and saltwater fishing applications. Suited for remote-mount aerator pump installations.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 4122-3 used for?\u003c\/strong\u003e The Attwood 4122-3 is a remote mounting bracket for livewell aerator hose, letting the aerator pump be mounted away from the livewell tank rather than through the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose diameter does the 4122-3 bracket fit?\u003c\/strong\u003e It is sized for 3\/4 inch diameter aerator hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 4122-3 mounting bracket made from?\u003c\/strong\u003e Plastic construction is used for the Attwood 4122-3, chosen to resist corrosion in the wet, high-vibration bilge environment where aerator hose typically runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Attwood 4122-3?\u003c\/strong\u003e The 4122-3 remote mounting bracket has a black finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 4122-3 bracket?\u003c\/strong\u003e The item measures 4.5 x 9.25 x 4.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 4122-3 weigh?\u003c\/strong\u003e It weighs 0.1333 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 4122-3 mount remotely or through the transom?\u003c\/strong\u003e This bracket is built for remote mounting, positioning the aerator pump away from the livewell tank rather than through-transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the 4122-3 compatible with?\u003c\/strong\u003e It is suited to built-in livewells on fiberglass and aluminum sport boats used in freshwater or saltwater fishing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in the package?\u003c\/strong\u003e The Attwood 4122-3 ships as a package quantity of 1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Attwood 4122-3 manufactured?\u003c\/strong\u003e Its country of origin is China.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 4122-3 a genuine Attwood part?\u003c\/strong\u003e Yes, the 4122-3 is a genuine Attwood remote mounting bracket, identified by Attwood part number 4122-3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 4122-3 bracket be used in both freshwater and saltwater setups?\u003c\/strong\u003e Yes, the Attwood 4122-3 is suited to livewell aerator installations on both freshwater and saltwater fishing boats.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989669359835,"sku":"ATT-4122-3","price":6.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-4122-3_large__04953.1722488479.500.750.jpg?v=1785188123"},{"product_id":"attwood-4140-4-waterbuster-portable-cordless-submersible-pump-200-gph-battery-powered-water-removal-for-boats-pool-covers-kayaks-inflatables","title":"Attwood WaterBuster 4140-4 Portable Submersible Utility Pump, 200 GPH Battery-Operated Cordless","description":"\u003cp\u003eThe Attwood WaterBuster (part number 4140-4) is a cordless, battery-operated portable pump built to remove unwanted water quickly and safely, without the hazard of an electrical cord in a wet environment. Powered by three D-size alkaline batteries, it runs for up to 5 hours per set and moves up to 200 gallons of water per hour on open flow, or 125 gallons per hour against a 2-foot head. It can lift water to a height of 40 inches. The pump ships with a 42-inch drainage hose fitted with a garden hose adapter, so a longer hose can be attached when extra reach is needed.\u003c\/p\u003e\u003cp\u003eIts compact 5.25-inch diameter and 6.5-inch height let it fit into tight spaces such as bilges, kayaks, and small hatches, while its fully submersible plastic housing stands up to repeated wet use. Typical applications include draining kayaks, inflatables, duck boats, dinghies, and paddle boats that lack a hard-wired electrical system, as well as clearing water from pool covers, aquariums, and sump pits. The WaterBuster is intended for portable, on-demand water removal only and is not designed to be installed as a permanent bilge pump.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4140-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Portable Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Battery powered (3 D-size alkaline batteries, not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 4.5 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Life:\u003c\/strong\u003e Up to 5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate (Open Flow):\u003c\/strong\u003e 200 gallons per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate at 2 ft. Head:\u003c\/strong\u003e 125 gallons per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Lift Height:\u003c\/strong\u003e 40 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 42 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Adapter:\u003c\/strong\u003e Garden hose adapter included for attaching a longer hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5.25 inches L x 5.25 inches W x 6.5 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Warranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal portable use; not vessel-specific. Suited to kayaks, inflatables, duck boats, dinghies, paddle boats, and other craft without a permanent electrical system, as well as pool covers, aquariums, and sump pits.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per hour does the Attwood 4140-4 pump move?\u003c\/strong\u003e The Attwood WaterBuster 4140-4 moves up to 200 gallons per hour on open flow, or 125 gallons per hour when working against a 2-foot head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat batteries does the WaterBuster 4140-4 use, and how long do they last?\u003c\/strong\u003e It runs on three D-size alkaline batteries (not included), which power the pump for up to 5 hours of continuous use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow high can this pump lift water?\u003c\/strong\u003e The 4140-4 can lift water to a height of 40 inches from its intake point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 4140-4 come with a hose?\u003c\/strong\u003e Yes, it includes a 42-inch drainage hose with a garden hose adapter, so a longer hose can be connected if more reach is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the WaterBuster 4140-4 be used as a permanent bilge pump?\u003c\/strong\u003e No. The 4140-4 is designed as a portable, on-demand pump and is not intended for permanent bilge pump installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Attwood 4140-4 pump?\u003c\/strong\u003e It measures 5.25 inches in diameter and 6.5 inches in height, and weighs 2.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood WaterBuster fully submersible?\u003c\/strong\u003e Yes, the 4140-4 is a submersible pump built to operate underwater in the space it is removing water from.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the WaterBuster 4140-4 typically used for?\u003c\/strong\u003e It is used to remove water from kayaks, inflatables, duck boats, dinghies, and paddle boats without a permanent electrical system, as well as from pool covers, aquariums, and sump pits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 4140-4 need to be plugged in or wired to a boat's electrical system?\u003c\/strong\u003e No. The 4140-4 is cordless and battery-powered, so it needs no electrical cord or onboard power source to run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 4140-4 housing made of?\u003c\/strong\u003e The pump housing is plastic, finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the WaterBuster 4140-4 run on?\u003c\/strong\u003e The 4140-4 operates on 4.5 volts DC, supplied by its three D-size alkaline batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on the Attwood 4140-4?\u003c\/strong\u003e The Attwood WaterBuster 4140-4 carries a 90-day manufacturer warranty.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989669458139,"sku":"ATT-4140-4","price":58.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-4140-4_lg__76962.1558139273.500.750.jpg?v=1785188279"},{"product_id":"attwood-hd2000-12v-bilge-pump-2000-gph-high-capacity-ball-bearing-marine-bilge-pump-with-anti-airlock-nozzle-mpn-4730-4","title":"Attwood HD 2000 Bilge Pump 4730-4, 12 Volt, Over 2000 GPH, Ball Bearing Design","description":"\u003cp\u003eThe Attwood HD 2000 bilge pump (part number 4730-4) is Attwood's highest capacity bilge pump, built to move large volumes of water quickly to keep a bilge dry in demanding conditions. The pump runs on 12-volt power and delivers over 2000 GPH at open flow while drawing less than 7 amps, giving strong output without placing excessive load on the battery. A ball-bearing design allows the motor to run cooler, which extends motor life compared to pumps relying on bushings alone. The pump is equipped with an anti-airlock nozzle to help prevent air from becoming trapped in the pump housing during operation, which supports more consistent priming and water removal. It comes fitted with a 36 inch wire for connection into the boat's bilge pump circuit. The compact housing measures 5.97 inches by 3.83 inches, allowing it to fit into standard bilge pump mounting locations. This pump is suited for boat owners who need high-volume automatic bilge pumping and want a durable, cooler-running motor for long-term reliability.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4730-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e HD 2000 Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e Over 2000 GPH at open flow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Draw:\u003c\/strong\u003e Less than 7 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Ball bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e Anti-airlock nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5.97 inches x 3.83 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697473042\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Attwood 4730-4 bilge pump run on?\u003c\/strong\u003e The Attwood 4730-4 HD 2000 bilge pump is a 12-volt pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much water can this pump move?\u003c\/strong\u003e The Attwood HD 2000 pump (4730-4) delivers over 2000 GPH at open flow, making it Attwood's highest capacity bilge pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many amps does the 4730-4 draw?\u003c\/strong\u003e It draws less than 7 amps, which is a relatively efficient draw given its over 2000 GPH open-flow output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this pump use a ball-bearing design instead of bushings?\u003c\/strong\u003e Ball bearings let the motor in the Attwood 4730-4 run cooler than a bushing-supported motor, which helps extend the motor's operating life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is an anti-airlock nozzle and does this pump have one?\u003c\/strong\u003e Yes, the Attwood HD 2000 pump 4730-4 includes an anti-airlock nozzle, designed to help keep air from becoming trapped in the pump housing so it primes and pumps more consistently.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the wire on the 4730-4?\u003c\/strong\u003e The Attwood 4730-4 comes with a 36 inch wire for wiring into the bilge circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Attwood HD 2000 pump?\u003c\/strong\u003e The pump housing measures 5.97 inches by 3.83 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 4730-4 bilge pump weigh?\u003c\/strong\u003e It weighs 2.625 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 4730-4 an automatic bilge pump?\u003c\/strong\u003e The 4730-4 is Attwood's HD 2000 pump, an automatic bilge pump model built for high-volume water removal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the HD 2000 pump and lower-capacity Attwood bilge pumps?\u003c\/strong\u003e Attwood markets the HD 2000 pump, including part number 4730-4, as its highest capacity bilge pump, moving over 2000 GPH at open flow versus the lower flow rates of smaller Attwood pump models.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989669556443,"sku":"ATT-4730-4","price":129.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ATT-4730-4-1700-Bilge-1__16091.1739477318.500.750.jpg?v=1785329070"},{"product_id":"attwood-4202-7-automatic-bilge-pump-float-switch-12v-24v-ce-rated-36-inch-wire","title":"Attwood 4202-7 Automatic Bilge Pump Float Switch, 12\/24-Volt, 36-Inch Wire","description":"\u003cp\u003eThe Attwood 4202-7 is an automatic float switch that converts a manual bilge pump into one that operates fully automatically. Its compact, low-profile design mounts on any surface from horizontal up to a 24-degree angle, making it adaptable to a range of bilge configurations. Inside, a reliable mechanical switch actuates the pump motor once water reaches a 2-inch level, so the pump only runs when it is actually needed. The switch is rated for both 12-volt and 24-volt DC systems and is CE rated, with a maximum amp draw of 12 amps at 12 volts or 6 amps at 24 volts. A 36-inch wire connection is included for wiring into the boat's bilge pump circuit.\u003c\/p\u003e\u003cp\u003eConstruction is plastic, and the switch mechanism is sealed to resist moisture, fume-ignition, and electrical shock, an important safety feature in an enclosed bilge environment. The unit contains no mercury, avoiding a substance classified as a health hazard and Persistent Toxic Substance in over 26 states. It measures 4 1\/4 inches long by 3 7\/8 inches wide by 1 3\/8 inches high. Non-automatic bilge pumps drawing 12 amps or less can be converted to automatic operation using this float switch, making it a straightforward upgrade for boats that currently rely on manually triggered bilge pumps.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4202-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Bilge Pump Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12-volt and 24-volt DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 12 amps at 12-volt DC, 6 amps at 24-volt DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Float switch, mechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuation Level:\u003c\/strong\u003e 2 inches of water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Angle:\u003c\/strong\u003e Horizontal up to 24 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e CE rated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMercury Content:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 4 1\/4 inches L x 3 7\/8 inches W x 1 3\/8 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4917 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697420275\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eCompatible with 12-volt and 24-volt bilge pumps drawing 12 amps or less, converting them from manual to fully automatic operation.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Attwood 4202-7 float switch do?\u003c\/strong\u003e The Attwood 4202-7 converts a manual bilge pump into one that runs fully automatically by triggering the pump whenever water in the bilge reaches a 2-inch level.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 4202-7 float switch work with?\u003c\/strong\u003e It is rated for both 12-volt and 24-volt DC systems and carries CE certification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much current can the 4202-7 handle?\u003c\/strong\u003e Maximum amp draw is 12 amps at 12-volt DC or 6 amps at 24-volt DC, so it works with non-automatic bilge pumps drawing 12 amps or less.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Attwood float switch mounted?\u003c\/strong\u003e It has a compact, low-profile design that mounts on any surface from horizontal up to a 24-degree angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 4202-7?\u003c\/strong\u003e The switch measures 4 1\/4 inches long by 3 7\/8 inches wide by 1 3\/8 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the wire on the Attwood 4202-7?\u003c\/strong\u003e It comes with a 36-inch wire connection for wiring into the bilge pump circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAt what water level does the float switch activate the pump?\u003c\/strong\u003e A reliable mechanical switch actuates the pump motor once water reaches a 2-inch level in the bilge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 4202-7 contain mercury?\u003c\/strong\u003e No, the 4202-7 float switch contains no mercury, a substance listed as a health hazard and Persistent Toxic Substance in over 26 states.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 4202-7 float switch made of?\u003c\/strong\u003e The switch housing is made of plastic, with a sealed switch mechanism that resists moisture, fume-ignition, and electrical shock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 4202-7 weigh?\u003c\/strong\u003e The 4202-7 float switch weighs 0.4917 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 4202-7 be used to upgrade an existing manual bilge pump?\u003c\/strong\u003e Yes, non-automatic pumps drawing 12 amps or less can easily be converted to automatic operation using the Attwood 4202-7 float switch.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989669654747,"sku":"ATT-4202-7","price":33.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-4202-7_lg__86202.1558139326.500.750.jpg?v=1785188067"},{"product_id":"attwood-4201-7-automatic-bilge-pump-float-switch-with-cover-12v-24v-fits-pumps-drawing-12-amps-or-less","title":"Attwood 4201-7 Automatic Float Switch with Cover, 12\/24-Volt Bilge Pump Switch","description":"\u003cp\u003eThe Attwood 4201-7 Automatic Float Switch converts a manual bilge pump into a fully automatic system, so the pump activates on its own whenever water accumulates in the bilge. Its compact design mounts on any surface from horizontal up to a 24-degree angle, making it adaptable to a wide range of bilge layouts. A reliable mechanical switch actuates the pump motor at a 2-inch water level, keeping the bilge clear without constant monitoring.\u003c\/p\u003e\u003cp\u003eThe integral cover adds protection against debris and dampens bilge sloshing to reduce unnecessary pump cycling, and a convenient test knob extends from the cover so the switch can be checked for proper operation at any time. Unlike wire leads on some competitive float switches that flex or hinge with the float, the leads on the 4201-7 are fixed for added durability. The sealed switch mechanism resists moisture, fume-ignition, and electrical shock, and the unit is marine ignition protected and RoHS compliant.\u003c\/p\u003e\u003cp\u003eThe switch is CE rated for both 12- and 24-volt systems, with a maximum amp draw of 12 amps at 12 volts DC or 6 amps at 24 volts DC, and comes with a 36-inch wire connection for flexible installation. It contains no mercury, a substance classified as a health hazard and Persistent Toxic Substance in many states. The 4201-7 is built from stainless steel components for long-term reliability in a marine environment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4201-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 and 24 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Amp Draw:\u003c\/strong\u003e 12 Amps at 12 Volts DC, 6 Amps at 24 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Angle:\u003c\/strong\u003e Up to 24 degrees from horizontal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuation Level:\u003c\/strong\u003e 2 inches of water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5 1\/4 inches L x 3 7\/8 inches W x 2 7\/8 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6667 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Float Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e CE rated, marine ignition protected, RoHS compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMercury Content:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697420176\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Attwood 4201-7 float switch do?\u003c\/strong\u003e The Attwood 4201-7 converts a manual bilge pump into a fully automatic system by actuating the pump motor once the water level in the bilge reaches 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 4201-7 work with my existing bilge pump?\u003c\/strong\u003e Yes, the 4201-7 is designed to work with non-automatic bilge pumps drawing 12 amps or less at 12 volts, converting them to automatic operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum amp draw of this float switch?\u003c\/strong\u003e The maximum amp draw is 12 amps at 12 volts DC or 6 amps at 24 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the float switch be mounted at an angle?\u003c\/strong\u003e Yes, the Attwood 4201-7 mounts on any surface from horizontal up to a 24-degree angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 4201-7 include a cover?\u003c\/strong\u003e Yes, this model includes an integral cover that adds protection, dampens bilge sloshing to reduce pump cycling, and helps prevent debris interference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage systems is this switch rated for?\u003c\/strong\u003e The 4201-7 is CE rated for both 12-volt and 24-volt DC marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the wire lead on the 4201-7?\u003c\/strong\u003e It comes with a 36-inch wire connection for installation flexibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAt what water level does the switch activate the pump?\u003c\/strong\u003e The mechanical switch actuates the pump motor once water in the bilge reaches a 2-inch level.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 4201-7 contain mercury?\u003c\/strong\u003e No, the 4201-7 contains no mercury, a substance classified as a health hazard and Persistent Toxic Substance in many states.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the float switch made of?\u003c\/strong\u003e The 4201-7 is constructed with stainless steel components for durability in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 4201-7 ignition protected?\u003c\/strong\u003e Yes, the Attwood 4201-7 is marine ignition protected and RoHS compliant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 4201-7 float switch?\u003c\/strong\u003e The 4201-7 measures 5 1\/4 inches long by 3 7\/8 inches wide by 2 7\/8 inches high.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989669687515,"sku":"ATT-4201-7","price":35.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-4201-7_large__37569.1558177759.500.750.jpg?v=1785188875"},{"product_id":"attwood-3899-3-thread-to-qwik-lok-aerator-pump-connector-fitting-fits-a-series-and-tsunami-500-800-gph-pumps-flow-rite-qwik-lok","title":"Attwood 3899-3 Thread-to-Qwik-Lok Connector Fitting for 500-800 GPH Pumps","description":"\u003cp\u003eThe Attwood 3899-3 is a thread-to-Flow-Rite Qwik-Lok connector fitting built for use with 500-800 GPH pumps, such as livewell, baitwell, and washdown pumps found on boats. One end of the fitting is threaded with a 3\/4 inch-14 thread to install directly into a pump outlet, thru-hull, or fitting port, while the opposite end is designed to accept a Flow-Rite Qwik-Lok coupler, allowing hose sections to be connected and disconnected quickly without tools. This makes the 3899-3 a practical choice for boat owners who want a fast-release connection point in their plumbing run instead of a fixed barbed hose joint.\u003c\/p\u003e\u003cp\u003eThe fitting is finished in white and constructed with a machined stainless steel body, giving it corrosion resistance for continuous exposure to saltwater and bilge environments. Its compact size allows it to fit into tight plumbing runs typical of livewell and baitwell systems. Because it uses the Flow-Rite Qwik-Lok coupling standard, it pairs with other Qwik-Lok equipped hose ends and fittings in the same plumbing system, simplifying maintenance and hose changes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 3899-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Thread-to-Flow-Rite Qwik-Lok Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Pump Flow Rate:\u003c\/strong\u003e 500-800 GPH pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/4 inch-14\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4.5 x 9.25 x 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.085 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Attwood 3899-3 connect?\u003c\/strong\u003e It joins a threaded pump or fitting port on one end to a Flow-Rite Qwik-Lok coupler on the other, letting a hose line be connected or released without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat pumps is the 3899-3 fitting designed for?\u003c\/strong\u003e This connector is intended for use with 500-800 GPH pumps, such as those used in livewell, baitwell, and washdown plumbing systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the thread size on the Attwood 3899-3?\u003c\/strong\u003e The threaded end of the 3899-3 uses a 3\/4 inch-14 thread that installs into a matching pump or fitting port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 3899-3 made of plastic or metal?\u003c\/strong\u003e The Attwood 3899-3 has a machined stainless steel body, giving it corrosion resistance for marine plumbing use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this fitting?\u003c\/strong\u003e The Attwood 3899-3 is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 3899-3 weigh?\u003c\/strong\u003e The 3899-3 connector fitting weighs 0.085 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 3899-3 fitting?\u003c\/strong\u003e As packaged, the Attwood 3899-3 measures 4.5 x 9.25 x 3.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a separate Qwik-Lok coupler to use this fitting?\u003c\/strong\u003e Yes, the 3899-3 provides the threaded connection point and Qwik-Lok end; a mating Flow-Rite Qwik-Lok coupler on the hose side is needed to complete the quick-release connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a barb-style version instead of the Qwik-Lok connector?\u003c\/strong\u003e Yes, the Attwood 3899-1 is the barb-connection version in the same fitting family, for those who prefer a hose barb over the Qwik-Lok quick-connect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fitting be used with any pump, or only specific flow rates?\u003c\/strong\u003e The 3899-3 is designed for use with 500-800 GPH pumps rather than higher-flow models.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989670899931,"sku":"ATT-3899-3","price":9.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-3899-3_lg_1__55310.1558113248.500.750.jpg?v=1785188837"},{"product_id":"attwood-5508-7-sahara-mk2-automatic-bilge-pump-12v-800-gph-with-float-switch","title":"Attwood Sahara MK2 Automatic Bilge Pump, 12V, 800 GPH","description":"\u003cp\u003eThe Attwood Sahara MK2 is a fully automatic 12-volt bilge pump rated at 800 gallons per hour, built for continuous duty in the bilge of boats where reliable water removal is critical to keeping the vessel afloat and dry. The pump uses a patented X-Air impeller design that clears trapped air from the pump chamber, preventing the air-lock condition that causes many bilge pumps to run dry without moving water. Attwood's SteadySwitch technology governs the automatic on\/off cycling with smart buoyancy control, so the pump activates only when needed and draws minimal current from the battery between cycles, an important factor for boats left unattended at a dock or mooring.\u003c\/p\u003e\u003cp\u003eThe outlet housing rotates a full 360 degrees, and the pump ships with both an elbow and a straight outlet fitting so it can be plumbed to match the discharge hose routing in a wide range of bilge layouts. A one-hand cartridge release lets the impeller cartridge be pulled for cleaning or servicing without tools, which matters in the tight, hard-to-reach spaces where bilge pumps are typically mounted. The housing and components are molded plastic in a white and blue finish, and the pump runs on a 12-volt DC electrical system. Included in the box are the pump unit, mounting instructions, a washer, a non-return valve (NRV) to prevent backflow through the discharge line, and both the 90 degree and straight outlet fittings.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5508-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e 12V, 800 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 13.33 gallons per minute (800 GPH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Lifting Height:\u003c\/strong\u003e 10.8 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 8.2 inches L x 3.5 inches W x 4.1 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.4375 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\/Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697023469\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Pump unit, instructions, washer, non-return valve (NRV), 90 degree outlet, straight outlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Use:\u003c\/strong\u003e Boating\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Attwood Sahara MK2 5508-7 bilge pump?\u003c\/strong\u003e The Attwood Sahara MK2 5508-7 is rated at 800 gallons per hour, which works out to about 13.33 gallons per minute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 5508-7 bilge pump automatic or manual?\u003c\/strong\u003e It is a fully automatic bilge pump; the SteadySwitch technology uses buoyancy control to turn the pump on and off as needed without a separate float switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Sahara MK2 5508-7 run on?\u003c\/strong\u003e This pump operates on a 12-volt DC electrical system, matching standard marine battery setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Attwood Sahara MK2 800 GPH pump?\u003c\/strong\u003e The 5508-7 measures 8.2 inches in length, 3.5 inches in width, and 4.1 inches in height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 5508-7 bilge pump weigh?\u003c\/strong\u003e The Sahara MK2 5508-7 weighs 1.4375 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the Sahara MK2 pump?\u003c\/strong\u003e Each 5508-7 unit ships with the pump, installation instructions, a washer, a non-return valve (NRV), a 90 degree outlet, and a straight outlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the outlet on this bilge pump rotate for different hose routing?\u003c\/strong\u003e Yes, the Sahara MK2 outlet rotates a full 360 degrees, and both elbow and straight outlet fittings are supplied so it can be plumbed to fit different bilge layouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood Sahara MK2 pump housing made from?\u003c\/strong\u003e The 5508-7 housing and outlet fittings are molded plastic, finished in white and blue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the pump avoid air-lock when the bilge water level is low?\u003c\/strong\u003e The Sahara MK2 uses a patented X-Air impeller that clears trapped air from the pump chamber, so it keeps pumping instead of air-locking and running dry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the impeller cartridge be serviced without removing the whole pump?\u003c\/strong\u003e Yes, the 5508-7 has a one-hand cartridge release that allows the impeller cartridge to be pulled for cleaning or replacement without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum lift height for the Attwood 5508-7?\u003c\/strong\u003e This pump can lift water up to 10.8 feet vertically.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Attwood Sahara MK2 800 GPH pump?\u003c\/strong\u003e The 5508-7 is covered by a 90 day manufacturer warranty.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989671129307,"sku":"ATT-5508-7","price":104.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Attwood_Sahara_Mk2_800_GPH_Automatic_Bilge_Pump_Topdown__61871.1722500851.500.750.jpg?v=1785189136"},{"product_id":"attwood-sahara-mk2-automatic-bilge-pump-12v-500-gph-with-x-air-impeller-and-360-degree-outlet-5505-7","title":"Attwood Sahara MK2 Automatic Bilge Pump, 12 Volt, 500 GPH","description":"\u003cp\u003eThe Attwood Sahara MK2 Automatic Bilge Pump is a 12 volt, 500 GPH DC bilge pump built for automatic water removal in boat bilges. It uses a patented X-Air Impeller to clear trapped air and keep pumping reliably even when air pockets would stall a standard impeller, and SteadySwitch technology provides smart buoyancy-based control that activates the pump only when needed to minimize battery drain. The pump has a maximum flow rate of 8.33 gallons per minute and a maximum lifting height of 7.5 feet, giving it enough head pressure to move water up and out of typical bilge locations.\u003c\/p\u003e\u003cp\u003eInstallation and servicing are simplified for hassle-free setup: the pump includes a one-hand cartridge release so the motor cartridge can be pulled and serviced without removing the base from the hull, and a 360 degree rotatable outlet lets the discharge elbow be aimed to fit the mounting orientation in the bilge. Both a 90 degree elbow outlet and a straight outlet are supplied so it can be plumbed either way. The housing is built of plastic in a white and blue finish, and the unit ships complete with the pump, instructions, a washer, and a non-return valve (NRV) to help prevent backflow into the bilge. It is designed for general boating use as an automatic bilge pump on 12 volt DC electrical systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5505-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Sahara MK2 Automatic Bilge Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 8.33 Gallons Per Minute (500 GPH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Lifting Height:\u003c\/strong\u003e 7.5 Feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 8.2 inches L x 3.5 inches W x 4.1 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.125 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\/Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Unit, Instructions, Washer, NRV (Non-Return Valve), 90 Degree Outlet, Straight Outlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697023452\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 5505-7 an automatic bilge pump?\u003c\/strong\u003e Yes, the Attwood Sahara MK2 5505-7 is a fully automatic 12 volt bilge pump that uses SteadySwitch technology to sense water and activate on its own, without a separate float switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat flow rate and lifting height does the Sahara MK2 bilge pump have?\u003c\/strong\u003e It delivers a maximum flow rate of 8.33 gallons per minute (rated 500 GPH) and can lift water up to a maximum height of 7.5 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Attwood 5505-7 bilge pump run on?\u003c\/strong\u003e The 5505-7 is a 12 volt DC bilge pump, designed for standard 12 volt boat electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Attwood Sahara MK2 5505-7?\u003c\/strong\u003e Each unit ships with the pump itself, installation instructions, a washer, a non-return valve (NRV), a 90 degree elbow outlet, and a straight outlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the outlet on this bilge pump be rotated for different mounting angles?\u003c\/strong\u003e Yes, the Sahara MK2 has a 360 degree rotatable outlet, and both an elbow and a straight outlet are supplied so it can be plumbed to fit the mounting orientation in the bilge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you service the motor on the 5505-7 without removing the whole pump?\u003c\/strong\u003e The Attwood Sahara MK2 uses a one-hand cartridge release, so the motor cartridge can be pulled out and serviced or replaced without unmounting the pump base from the hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 5505-7 bilge pump housing made of?\u003c\/strong\u003e The housing is made of plastic, finished in white and blue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sahara MK2 500 GPH bilge pump?\u003c\/strong\u003e The pump measures 8.2 inches long by 3.5 inches wide by 4.1 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 5505-7 bilge pump weigh?\u003c\/strong\u003e It weighs 1.125 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sahara MK2 bilge pump help prevent air lock?\u003c\/strong\u003e Yes, it uses a patented X-Air Impeller designed to clear trapped air from the pump so it keeps pumping reliably instead of losing prime.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Attwood 5505-7?\u003c\/strong\u003e The Attwood Sahara MK2 5505-7 carries a 1 year manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5505-7 include a non-return valve?\u003c\/strong\u003e Yes, a non-return valve (NRV) is included with the Sahara MK2 to help prevent water from flowing back into the bilge through the discharge line.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989671194843,"sku":"ATT-5505-7","price":68.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Attwood_Sahara_Mk2_500_GPH_Automatic_Bilge_Pump__92103.1722507511.500.750.jpg?v=1785188643"},{"product_id":"attwood-sahara-mk2-automatic-bilge-pump-12v-1200-gph-with-x-air-impeller-mpn-5512-7","title":"Attwood Sahara MK2 Automatic Bilge Pump, 12V, 1200 GPH","description":"\u003cp\u003eThe Attwood Sahara MK2 is a 12-volt automatic bilge pump rated at 1200 GPH, built for boaters who need dependable, low-maintenance water removal in a compact housing. It uses a patented X-Air impeller that clears trapped air from the pump chamber, eliminating the air-lock stalling that plagues many bilge pumps after periods of low water or dry running. Smart buoyancy-based automatic switching (SteadySwitch technology) starts and stops the pump based on water level without a separate float switch, which reduces wiring complexity and helps conserve battery power when the bilge is dry.\u003c\/p\u003e\u003cp\u003eThe housing and impeller assembly are molded from durable plastic in a white and blue finish, and the outlet is a 360-degree rotatable elbow design so the discharge can be aimed in any direction to suit the mounting location; both a 90-degree elbow outlet and a straight outlet are included so the pump can be plumbed either way. A one-hand cartridge release lets the impeller cartridge be pulled for cleaning or servicing without tools, which matters in the tight, hard-to-reach corners of a bilge. At 12 volts DC and a maximum lifting height of 10.8 feet, the Sahara MK2 is sized for typical small to mid-size boat bilges, sumps, and livewells where automatic, unattended pump-out is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5512-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 1200 gallons per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Lifting Height:\u003c\/strong\u003e 10.8 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 8.2 inches L x 3.5 inches W x 4.1 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.4375 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\/Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Design:\u003c\/strong\u003e 360 degree rotatable elbow, elbow and straight outlets included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching:\u003c\/strong\u003e Automatic, buoyancy-based (SteadySwitch technology)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Unit, instructions, washer, NRV (non-return valve), 90 degree outlet, straight outlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697023483\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Warranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Attwood Sahara MK2 bilge pump?\u003c\/strong\u003e The Attwood Sahara MK2 (part number 5512-7) is rated at 1200 gallons per hour at 12 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sahara MK2 turn on and off by itself?\u003c\/strong\u003e Yes, the 5512-7 uses Attwood's SteadySwitch technology, a buoyancy-based automatic switching system that starts and stops the pump based on water level without a separate float switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this bilge pump?\u003c\/strong\u003e The Attwood Sahara MK2 measures 8.2 inches long by 3.5 inches wide by 4.1 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sahara MK2 bilge pump weigh?\u003c\/strong\u003e The unit weighs 1.4375 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Attwood 5512-7 run on?\u003c\/strong\u003e It is a 12 volt DC bilge pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum lifting height for this pump?\u003c\/strong\u003e 10.8 feet is the maximum lifting height for the Sahara MK2 bilge pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the pump housing made of?\u003c\/strong\u003e The Attwood Sahara MK2 housing and components are made of plastic, finished in white and blue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 5512-7?\u003c\/strong\u003e The package includes the pump unit, instructions, a washer, an NRV (non-return valve), a 90 degree outlet, and a straight outlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the outlet be aimed in different directions?\u003c\/strong\u003e Yes, the Sahara MK2 has a 360 degree rotatable elbow outlet, and both an elbow and a straight outlet are supplied so it can be plumbed to fit the mounting orientation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this pump avoid air lock?\u003c\/strong\u003e The 5512-7 uses a patented X-Air impeller designed to clear trapped air from the pump chamber, which prevents the air-lock stalling that affects many automatic bilge pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the impeller cartridge easy to service?\u003c\/strong\u003e Yes, the Sahara MK2 has a one-hand cartridge release for quick access when cleaning or servicing the impeller, even in tight bilge spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Attwood Sahara MK2?\u003c\/strong\u003e Attwood backs the 5512-7 bilge pump with a 90 day manufacturer warranty.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989671325915,"sku":"ATT-5512-7","price":123.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Attwood_Sahara_Mk2_1200_GPH_Automatic_Bilge_Pump_Topdown__55437.1722347985.500.750.jpg?v=1785189192"},{"product_id":"attwood-5606-7-tsunami-mk2-t500-manual-bilge-pump-12v-500-gph-direct-replacement-for-4606-7","title":"Attwood 5606-7 Tsunami MK2 T500 Manual Bilge Pump, 12 Volt, 500 GPH, Replaces 4606-7","description":"\u003cp\u003eThe Attwood 5606-7 Tsunami MK2 T500 is a 12 volt manual bilge pump built for reliable water removal in freshwater conditions. It uses a patented X-Air Impeller that clears trapped air from the pump chamber, eliminating air-lock so the pump keeps moving water consistently instead of stalling out. The pump rates at 500 gallons per hour and delivers a maximum lifting height of 7.8 feet, giving it enough head pressure to clear a typical bilge through a standard discharge run.\u003c\/p\u003e\u003cp\u003eInstallation and service are designed to be quick: the pump is easy to mount, and a one-hand cartridge release lets you pull the pump housing for cleaning or service in tight bilge spaces without special tools. The outlet is a 360 degree rotatable elbow design, so the discharge can be aimed to fit the mounting orientation in your bilge; both a 90 degree elbow outlet and a straight outlet are supplied so you can choose the fitting that matches your plumbing run. The pump housing and components are built from durable plastic in a white and red finish, and the unit ships complete with a washer\/NRV (non-return valve) and installation instructions.\u003c\/p\u003e\u003cp\u003eThis pump is a direct replacement for the Attwood 4606-7 12V T500, so it drops into applications that used that earlier part number without modification.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5606-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Manual Bilge Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Tsunami MK2 T500, 12V, 500 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 500 gallons per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Lifting Height:\u003c\/strong\u003e 7.8 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 3.6 inches L x 6.1 inches W x 3.7 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\/Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Pump unit, instructions, washer\/NRV (non-return valve), 90 degree outlet, straight outlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697023971\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAttwood 4606-7\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Attwood 5606-7 Tsunami MK2 bilge pump?\u003c\/strong\u003e The Attwood 5606-7 Tsunami MK2 T500 pumps 500 gallons per hour at a 12 volt DC power source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5606-7 replace the Attwood 4606-7?\u003c\/strong\u003e Yes, the Attwood 5606-7 is a direct replacement for the Attwood 4606-7 12V T500 bilge pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow high can this pump lift water?\u003c\/strong\u003e The Tsunami MK2 T500 (part number 5606-7) has a maximum lifting height of 7.8 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 5606-7 bilge pump run on?\u003c\/strong\u003e It runs on 12 volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 5606-7 pump made from?\u003c\/strong\u003e The pump housing and components are made from durable plastic, finished in white and red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this bilge pump?\u003c\/strong\u003e The Attwood 5606-7 measures 3.6 inches long by 6.1 inches wide by 3.7 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 5606-7 bilge pump weigh?\u003c\/strong\u003e It weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fittings come with the Attwood Tsunami MK2 T500?\u003c\/strong\u003e The 5606-7 ships with both a 90 degree elbow outlet and a straight outlet, so you can select whichever fitting matches your discharge plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this pump avoid air-lock?\u003c\/strong\u003e The Tsunami MK2 T500 uses a patented X-Air Impeller that clears trapped air from the pump, preventing the air-lock that stalls out ordinary bilge pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the outlet be rotated after mounting?\u003c\/strong\u003e Yes, the outlet on the Attwood 5606-7 is a 360 degree rotatable elbow design, letting you aim the discharge to fit your mounting orientation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs servicing this pump difficult once it's installed?\u003c\/strong\u003e No, the 5606-7 has a one-hand cartridge release that lets you pull the pump housing for cleaning or service in tight bilge spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 5606-7?\u003c\/strong\u003e The package includes the pump unit, installation instructions, a washer\/NRV (non-return valve), a 90 degree outlet, and a straight outlet.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989671555291,"sku":"ATT-5606-7","price":34.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Attwood_Tsunami_Mk2_500GPH_Bilge_Pump_External_Mounting_Feet__32006.1722518063.500.750.jpg?v=1785189213"},{"product_id":"attwood-tsunami-mk2-t800-bilge-pump-12v-800-gph-direct-replacement-for-4608-7-threaded-manual-cartridge-pump-with-elbow-straight-fittings","title":"Attwood Tsunami Mk2 T800 12V Bilge Pump, 800 GPH, Replaces 4608-7","description":"\u003cp\u003eThe Attwood Tsunami Mk2 T800 is a 12 volt DC bilge pump rated for 800 gallons per hour, built for reliable water removal in boats operating in freshwater conditions. It uses a patented X-Air Impeller that clears trapped air pockets so the pump keeps moving water instead of losing prime, a common failure point in lesser bilge pumps. The pump is designed for quick installation and easy service, with a one-hand cartridge release that lets you pull the impeller cartridge for cleaning or replacement without tools or awkward reach into tight bilge compartments. The outlet is a 360 degree rotatable elbow design, so the discharge can be aimed in any direction to match your hose routing, and the pump ships with both a 90 degree elbow outlet and a straight outlet fitting to fit different mounting layouts. Construction is durable plastic in a white and blue housing, sized to fit compactly into standard bilge mounting locations. In the box you get the pump unit, mounting instructions, a washer, a non-return valve (NRV) to prevent backflow when the pump shuts off, the 90 degree outlet, and the straight outlet. This is a direct replacement for the Attwood 4608-7 12V T800 pump, so it drops into the same mounting footprint and plumbing as that earlier part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5608-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e T800 - 12V, 800 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Capacity:\u003c\/strong\u003e 800 Gallons Per Hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 13.33 Gallons Per Minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Lifting Height:\u003c\/strong\u003e 12 Feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 4.3 inches L x 6.6 inches W x 4.3 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\/Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697023988\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Unit, Instructions, Washer, NRV (Non Return Valve), 90 Degree Outlet, Straight Outlet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits any boat bilge application sized for a 12 volt, 800 GPH pump; a direct replacement for the Attwood 4608-7 12V T800 pump.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e4608-7\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Attwood Tsunami Mk2 T800 bilge pump?\u003c\/strong\u003e The Attwood Tsunami Mk2 T800 (part number 5608-7) is rated at 800 gallons per hour, which works out to 13.33 gallons per minute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pump replace the Attwood 4608-7?\u003c\/strong\u003e Yes, the Attwood 5608-7 is a direct replacement for the Attwood 4608-7 12V T800 pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this bilge pump run on?\u003c\/strong\u003e This is a 12 volt DC bilge pump, part number 5608-7.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow high can the Tsunami Mk2 T800 lift water?\u003c\/strong\u003e The maximum lifting height for the Attwood Tsunami Mk2 T800 (5608-7) is 12 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Attwood 5608-7 bilge pump?\u003c\/strong\u003e The pump measures 4.3 inches long by 6.6 inches wide by 4.3 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood Tsunami Mk2 T800 weigh?\u003c\/strong\u003e This bilge pump weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 5608-7 pump?\u003c\/strong\u003e The Attwood 5608-7 ships with the pump unit, installation instructions, a washer, a non-return valve (NRV), a 90 degree outlet elbow, and a straight outlet fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the pump housing made from?\u003c\/strong\u003e The Attwood Tsunami Mk2 T800 housing is made of durable plastic, finished in white and blue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the outlet be rotated to fit my hose routing?\u003c\/strong\u003e Yes, the 5608-7 uses a 360 degree rotatable elbow outlet, and both a 90 degree elbow and a straight outlet fitting are included so you can match your existing hose routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I service the impeller cartridge on this pump?\u003c\/strong\u003e The Attwood Tsunami Mk2 T800 has a one-hand cartridge release, allowing the impeller cartridge to be pulled for cleaning or replacement without tools, even in tight bilge spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Tsunami Mk2 T800 handle trapped air in the line?\u003c\/strong\u003e Yes, part number 5608-7 uses a patented X-Air Impeller designed to clear air-lock so the pump keeps priming and moving water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat water conditions is this bilge pump built for?\u003c\/strong\u003e The Attwood Tsunami Mk2 T800 is built and rated for freshwater bilge pumping applications.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989671653595,"sku":"ATT-5608-7","price":52.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Attwood_Tsunami_Mk2_800GPH_Bilge_Pump_with_Included_Parts__01662.1722376174.500.750.jpg?v=1785188836"},{"product_id":"attwood-tsunami-mk2-1200-12v-bilge-pump-with-threaded-outlet-mpn-5612-1","title":"Attwood Tsunami MK2 1200 12V Bilge Pump with Threaded Port - Part 5612-1","description":"\u003cp\u003eThe Attwood Tsunami MK2 1200 is a 12V bilge pump built for onboard water removal, part number 5612-1. It is configured with a threaded discharge port, allowing a threaded hose fitting to be attached directly to the pump outlet rather than a push-on barb connection. Running on a 12V DC electrical system, it is intended for installation in the bilge area of a boat where it can be wired into the vessel's 12V circuit to move water out of the hull.\u003c\/p\u003e\u003cp\u003eAs part of the Tsunami MK2 1200 lineup, this pump is identified by its model designation on the housing and packaging, which helps confirm it is the correct unit when cross-checking against part number 5612-1. The threaded port design is a specific mechanical feature worth confirming against your existing plumbing before installation, since it differs from barbed-outlet pump variants.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5612-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Tsunami MK2 1200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Port Type:\u003c\/strong\u003e Threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9687 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697024145\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Attwood 5612-1 bilge pump run on?\u003c\/strong\u003e The Attwood Tsunami MK2 1200 (part 5612-1) is a 12V DC bilge pump, designed to run on a standard 12-volt boat electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pump have a threaded or barbed outlet?\u003c\/strong\u003e Part number 5612-1 has a threaded discharge port, so it takes a threaded hose fitting rather than a push-on barb connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood Tsunami MK2 1200 weigh?\u003c\/strong\u003e The Attwood Tsunami MK2 1200, part 5612-1, weighs 0.9687 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this pump?\u003c\/strong\u003e The manufacturer part number is 5612-1, from Attwood's Tsunami MK2 1200 product line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 5612-1 pump?\u003c\/strong\u003e The UPC for the Attwood Tsunami MK2 1200 bilge pump, part 5612-1, is 022697024145.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 5612-1 pump compatible with barbed hose fittings?\u003c\/strong\u003e No, part 5612-1 uses a threaded outlet port, so a barbed fitting will not connect directly without an adapter that matches the thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product line is part 5612-1 from?\u003c\/strong\u003e Part 5612-1 belongs to Attwood's Tsunami MK2 1200 lineup of bilge pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 5612-1 an original Attwood part or aftermarket?\u003c\/strong\u003e The 5612-1 is an Attwood-branded part in the Tsunami MK2 1200 line, identified by Attwood's own part number.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989671686363,"sku":"ATT-5612-1","price":66.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_ba474ecd-0525-4785-9f28-0f12d5057532.jpg?v=1785349184"},{"product_id":"attwood-5612-7-tsunami-mk2-t1200-manual-bilge-pump-12v-1200-gph-direct-replacement-for-4612-7-with-straight-90-degree-elbow-fittings","title":"Attwood Tsunami Mk2 T1200 12V Manual Bilge Pump, 1200 GPH, Direct Replacement for Attwood 4612-7","description":"\u003cp\u003eThe Attwood Tsunami Mk2 T1200 is a 12-volt manual bilge pump rated at 1200 GPH, built for efficient, reliable water removal aboard small to mid-size boats. It uses a patented X-Air Impeller design to clear trapped air pockets that would otherwise cause a standard impeller to lose prime, keeping the pump moving water even when air gets drawn into the intake alongside bilge water.\u003c\/p\u003e\u003cp\u003eThe pump ships with both a 360 degree rotatable elbow outlet and a straight outlet, so it can be installed in tight or awkward bilge compartments without forcing the discharge hose into an unworkable angle. A one-hand cartridge release lets the impeller cartridge be pulled and serviced quickly, without tools, which matters when the pump is mounted in a cramped bilge space and needs a fast field cleaning or impeller swap. The housing and impeller are made of durable plastic, and the unit is designed for freshwater use.\u003c\/p\u003e\u003cp\u003eThis unit is a direct replacement for the earlier Attwood 4612-7 12V T1200 pump, so boat owners upgrading or replacing a worn unit can install the 5612-7 in the same mounting location without changing the plumbing configuration. The pump includes the mounting washer and a non-return valve (NRV) to prevent backflow through the discharge line once the pump shuts off.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5612-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e T1200 - 12V, 1200 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 20 Gallons Per Minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Lifting Height:\u003c\/strong\u003e 14 Feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 4 inches L x 6.6 inches W x 4.4 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\/Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Design:\u003c\/strong\u003e 360 degree rotatable elbow outlet, with straight outlet included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Unit, Instructions, Washer, NRV (Non-Return Valve), 90 Degree Outlet, Straight Outlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697024152\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a manual 12-volt bilge pump intended for general marine bilge installation; no make\/model\/year fitment is specified beyond its use as a direct replacement for the Attwood 4612-7 12V T1200 pump.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAttwood 4612-7\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 5612-7 bilge pump rated for?\u003c\/strong\u003e The Attwood 5612-7 Tsunami Mk2 is a 12-volt manual bilge pump rated at 1200 GPH (T1200), with a maximum flow rate of 20 gallons per minute and a maximum lifting height of 14 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 5612-7 a direct replacement for another Attwood pump?\u003c\/strong\u003e Yes, the 5612-7 is a direct replacement for the Attwood 4612-7 12V T1200 pump, so it installs in the same location without changing existing plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the pump come with the fittings needed to install it?\u003c\/strong\u003e Yes, the 5612-7 ships with both a 90 degree elbow outlet and a straight outlet, along with the mounting washer and a non-return valve (NRV), so both outlet configurations are covered out of the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this bilge pump?\u003c\/strong\u003e The Attwood Tsunami Mk2 T1200 (5612-7) measures 4 inches long by 6.6 inches wide by 4.4 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 5612-7 weigh?\u003c\/strong\u003e The Attwood 5612-7 bilge pump weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this pump run on?\u003c\/strong\u003e This is a 12-volt DC bilge pump, drawing power from a standard 12V marine electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the X-Air Impeller feature on this pump?\u003c\/strong\u003e The X-Air Impeller is a patented impeller design in the Attwood Tsunami Mk2 T1200 that clears trapped air pockets so the pump keeps moving water instead of losing prime when air enters the intake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the outlet be rotated after installation?\u003c\/strong\u003e Yes, the elbow outlet on the 5612-7 rotates a full 360 degrees, allowing the discharge hose to be aimed in whatever direction fits the mounting location; a straight outlet is also included as an alternative.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump serviceable in a tight bilge space?\u003c\/strong\u003e The Attwood 5612-7 features a one-hand cartridge release, letting the impeller cartridge be removed for cleaning or replacement quickly without tools, even in a cramped bilge compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the pump housing made of?\u003c\/strong\u003e The Attwood Tsunami Mk2 T1200 (5612-7) is constructed of durable plastic in a white and gray color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 5612-7?\u003c\/strong\u003e The package includes the pump unit, instructions, a mounting washer, a non-return valve (NRV), a 90 degree outlet, and a straight outlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 5612-7 genuine Attwood equipment?\u003c\/strong\u003e Yes, the 5612-7 is a genuine Attwood part, manufactured by Attwood under the Tsunami Mk2 T1200 product line.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989671850203,"sku":"ATT-5612-7","price":69.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61TMOeb8TKL.jpg?v=1784486943"},{"product_id":"attwood-66548-3-stainless-steel-straight-thru-hull-fitting-barbed-1-inch-hose-standard-length","title":"Attwood 66548-3 Stainless Steel Barbed Straight Thru-Hull Fitting, 1-Inch Hose, Standard Length","description":"\u003cp\u003eThe Attwood 66548-3 is a stainless steel straight thru-hull fitting built to install securely through a boat's hull and deliver long-term, corrosion-free performance in the marine environment. It is a barbed, standard-length fitting designed for use with 1-inch inside diameter hose, making it a common choice for below-deck plumbing runs such as bilge, washdown, or raw water intake lines that need a reliable hull penetration point.\u003c\/p\u003e\u003cp\u003eThe fitting features a 2-1\/4 inch flange diameter that seats against the hull for a solid seal, a 1-3\/8 inch thread outside diameter with 2-1\/4 inch of thread length, and a 1-inch NPSM thread. The barb itself measures 1-1\/4 inch long, and the fitting's total length is 3-7\/8 inches. It requires a 1-1\/2 inch installation hole and is rated for hulls up to 1-3\/4 inch thick. Constructed of stainless steel, it resists the corrosion that can affect lower-grade metal fittings over time.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 66548-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1 inch I.D.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPSM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Outside Diameter:\u003c\/strong\u003e 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Length:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Diameter:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Length:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Length:\u003c\/strong\u003e 3-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Hole Size:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Hull Thickness:\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8833 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose fits the Attwood 66548-3 thru-hull fitting?\u003c\/strong\u003e This thru-hull fitting is barbed for 1-inch inside diameter hose, and the 66548-3 designation refers to this specific hose size and length combination.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 66548-3 a barbed or threaded thru-hull fitting?\u003c\/strong\u003e It is a barbed fitting, meaning the hose pushes directly onto the barb rather than connecting to a threaded pipe fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 66548-3 thru-hull made from?\u003c\/strong\u003e Stainless steel, chosen for corrosion resistance in below-deck marine plumbing applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole do I need to drill to install this fitting?\u003c\/strong\u003e A 1-1\/2 inch installation hole is required to mount the Attwood 66548-3 thru-hull fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum hull thickness this fitting will work with?\u003c\/strong\u003e The 66548-3 accommodates hulls up to 1-3\/4 inch thick, based on its 2-1\/4 inch thread length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Attwood 66548-3 overall?\u003c\/strong\u003e 3-7\/8 inches from end to end, with a 1-1\/4 inch barb and 2-1\/4 inch of NPSM thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flange diameter on this thru-hull fitting?\u003c\/strong\u003e 2-1\/4 inches, which is the diameter of the flange that seats against the hull surface for the 66548-3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type does the Attwood 66548-3 use?\u003c\/strong\u003e A 1-inch NPSM thread with a 1-3\/8 inch thread outside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this thru-hull fitting weigh?\u003c\/strong\u003e The Attwood 66548-3 weighs 0.8833 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Attwood part or an aftermarket copy?\u003c\/strong\u003e The 66548-3 is a genuine Attwood-manufactured stainless steel thru-hull fitting, not a generic aftermarket substitute.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989673095387,"sku":"ATT-66548-3","price":33.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7193Qna-FBL.jpg?v=1784487022"},{"product_id":"attwood-66547-3-stainless-steel-straight-thru-hull-fitting-barbed-for-3-4-inch-id-hose","title":"Attwood 66547-3 Stainless Steel Straight Thru-Hull Fitting, 3\/4 Inch Hose Barb, NPSM Thread","description":"\u003cp\u003eThe Attwood 66547-3 is a straight stainless steel thru-hull valve fitting built for a permanent, corrosion-free through-hull connection below the waterline. It is a barbed, standard-length fitting sized for 3\/4-inch interior diameter hose, making it a common choice for bilge, washdown, live well, and other below-waterline plumbing runs where a secure, leak-resistant penetration is required.\u003c\/p\u003e\u003cp\u003eThe fitting uses a 3\/4-inch NPSM thread with a 1-inch thread outside diameter and a 2-inch thread length, paired with a 1 7\/8-inch flange diameter that seats against the hull surface. The hose barb measures 1 1\/4 inches long, and the fitting's total length is 3 3\/4 inches. Installation calls for a 1 1\/8-inch hole saw, and the fitting is rated for hulls up to a maximum thickness of 1 5\/8 inches. It has a machined finish and two ports for through-hull flow.\u003c\/p\u003e\u003cp\u003eConstructed of stainless steel for long-term durability in a marine environment, this fitting resists the corrosion that can compromise below-waterline hardware over time. It is sold as a single fitting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 66547-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Thru-Hull Valve Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Barb Size:\u003c\/strong\u003e 3\/4 Inch Interior Diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e 3\/4 Inch NPSM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Outside Diameter:\u003c\/strong\u003e 1 Inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Length:\u003c\/strong\u003e 2 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Diameter:\u003c\/strong\u003e 1 7\/8 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Length:\u003c\/strong\u003e 1 1\/4 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 3 3\/4 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Hole Saw Size:\u003c\/strong\u003e 1 1\/8 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Hull Thickness:\u003c\/strong\u003e 1 5\/8 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Ports:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5834 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Attwood 66547-3 fit?\u003c\/strong\u003e The Attwood 66547-3 is a barbed fitting sized for 3\/4-inch interior diameter hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread does this thru-hull fitting use?\u003c\/strong\u003e It uses a 3\/4-inch NPSM thread, with a 1-inch thread outside diameter and a 2-inch thread length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hole saw size is needed to install the 66547-3?\u003c\/strong\u003e A 1 1\/8-inch hole saw is used to cut the mounting hole for the Attwood 66547-3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum hull thickness this fitting will work with?\u003c\/strong\u003e The Attwood 66547-3 is rated for hulls up to a maximum thickness of 1 5\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 66547-3 made from?\u003c\/strong\u003e It is made of stainless steel, chosen for corrosion resistance in below-waterline marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the fitting overall?\u003c\/strong\u003e The Attwood 66547-3 has a total length of 3 3\/4 inches, with a 1 1\/4-inch barb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flange diameter on this fitting?\u003c\/strong\u003e The flange diameter on the 66547-3 is 1 7\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fitting straight or angled?\u003c\/strong\u003e The 66547-3 is a straight thru-hull valve fitting, not an angled design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many ports does the 66547-3 have?\u003c\/strong\u003e This Attwood thru-hull fitting has two ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the finish on the Attwood 66547-3?\u003c\/strong\u003e It has a machined stainless steel finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 66547-3 weigh?\u003c\/strong\u003e The Attwood 66547-3 weighs 0.5834 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 66547-3 come as a single fitting?\u003c\/strong\u003e Yes, the Attwood 66547-3 is sold as a single thru-hull fitting.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989673160923,"sku":"ATT-66547-3","price":28.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81zmV5CiUNL.jpg?v=1784487023"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/41If461MWKL.jpg?v=1785357515","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-pumps-plumbing-sanitation.oembed?page=2","provider":"Good Vibes Marina","version":"1.0","type":"link"}