{"title":"Carbon Monoxide \u0026 Gas Detectors","description":null,"products":[{"product_id":"fireboy-xintex-g-2bb-r-marine-gasoline-detector-2-zone-with-blower-relay","title":"Fireboy-Xintex G-2BB-R Marine Gasoline Detector, 2-Zone with Blower Relay","description":"\u003cp\u003eThe Fireboy-Xintex G-2BB-R Marine Gasoline Detector protects your boat by proactively detecting gasoline vapor issues in the bilge and engine compartment before they become dangerous. It uses a remote sensor to monitor the bilge and engine compartment continuously, including during and after fueling, giving you an early warning of fuel vapor buildup rather than waiting for a problem to develop.\u003c\/p\u003e\u003cp\u003eThe system covers two sensor zones, so it can monitor multiple compartments on the vessel at once. When gasoline vapor is detected, the unit alerts you with both LED warning lights and a 68 dBA audible alarm, making the warning hard to miss whether you are aboard or nearby. A silence\/test button lets you quiet the alarm or verify the system is functioning correctly. Built in is a 10A relay that can automatically start the bilge blower fan when vapor is detected, helping to ventilate the compartment and clear fuel vapor without requiring you to manually intervene.\u003c\/p\u003e\u003cp\u003eThe G-2BB-R runs on a 9-30 volt input range and draws power at 12VDC, making it compatible with standard marine electrical systems. This gasoline detector does not include generator shutdown functionality. It is designed for boaters who want dependable, always-on monitoring for gasoline vapor hazards in enclosed compartments.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Fireboy-Xintex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e G-2BB-R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Marine Gasoline Detector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFume Type:\u003c\/strong\u003e Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensors Included:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e 68 dBA sound alarm with LED warning lights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilence\/Test Button:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Input Range:\u003c\/strong\u003e 9-30 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 12VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlower Relay:\u003c\/strong\u003e Yes, 10A relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenerator Shutdown:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Fireboy-Xintex G-2BB-R detect?\u003c\/strong\u003e The G-2BB-R is a gasoline vapor detector that monitors the bilge and engine compartment for gasoline fumes, including during and after fueling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many sensors come with the G-2BB-R system?\u003c\/strong\u003e This system includes 2 sensors, allowing it to monitor two zones such as the bilge and engine compartment at the same time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the G-2BB-R control the bilge blower automatically?\u003c\/strong\u003e Yes, the G-2BB-R has a 10A blower relay that can automatically start the bilge blower fan when gasoline vapor is detected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow loud is the alarm on the G-2BB-R?\u003c\/strong\u003e The Fireboy-Xintex G-2BB-R sounds a 68 dBA audible alarm along with LED warning lights when gasoline vapor is detected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the G-2BB-R shut down a generator when vapor is detected?\u003c\/strong\u003e No, the G-2BB-R does not include generator shutdown functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the G-2BB-R operate on?\u003c\/strong\u003e The G-2BB-R accepts a 9-30 volt input range and draws current at 12VDC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I test the G-2BB-R alarm or silence it?\u003c\/strong\u003e Yes, the unit has a silence\/test button that lets you test the system's function or silence an active alarm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the G-2BB-R weigh?\u003c\/strong\u003e The Fireboy-Xintex G-2BB-R weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the G-2BB-R only for gasoline, or does it also detect other fumes?\u003c\/strong\u003e The G-2BB-R is specifically a gasoline detector, designed to sense gasoline vapor rather than other gas types.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of boat safety equipment does the G-2BB-R fall under?\u003c\/strong\u003e The G-2BB-R is classified as a boat alarm, specifically a gasoline vapor detection system for onboard use.\u003c\/p\u003e","brand":"Fireboy-Xintex","offers":[{"title":"Default Title","offer_id":49027475210459,"sku":"F-B-G-2BB-R","price":635.63,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2BB-R__92281.1739462992.500.750.jpg?v=1785164216"},{"product_id":"fireboy-xintex-cmd6-md-r-12-24v-carbon-monoxide-detector-with-internal-relay","title":"Fireboy-Xintex CMD6-MD-R 12\/24V Carbon Monoxide Detector with Internal Relay","description":"\u003cp\u003eThe Fireboy-Xintex CMD6-MD-R is a 12\/24V carbon monoxide detector built for continuous engine and living-space monitoring aboard a boat. It uses an electrochemical sensor for accurate CO detection and includes an internal backup battery that keeps the unit protecting the vessel during a power outage, with an approximate 7-year service life. The compact housing allows for inconspicuous mounting while still delivering an 85 dBA alarm horn loud enough to alert everyone aboard.\u003c\/p\u003e\u003cp\u003eAn internal relay is built into the CMD6-MD-R, allowing it to trigger a generator shutdown or send a signal to an external device the moment CO levels reach the 10% COHb alarm point. This top-of-the-line sensor is engineered for immediate alarms while using stable sensing logic to reduce nuisance false alarms. Multiple CMD6-MD-R units can be interconnected so that an alarm triggered anywhere on the vessel sounds at every station, giving full-vessel protection rather than a single isolated warning point. At just 4 mA power draw at 12VDC, it is efficient enough to run continuously off the boat's electrical system while the internal backup battery stands ready.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Fireboy-Xintex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CMD6-MD-R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12\/24V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor Type:\u003c\/strong\u003e Electrochemical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Usage @ 12VDC:\u003c\/strong\u003e 4 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm Point:\u003c\/strong\u003e 10% COHb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm Horn:\u003c\/strong\u003e 85 dBA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackup Battery Life:\u003c\/strong\u003e Approximately 7 years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.5 inches x 3.5 inches x 1.21 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 619749208822\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the CMD6-MD-R run on?\u003c\/strong\u003e The CMD6-MD-R is designed to run on 12\/24V DC systems, drawing about 4 mA of power at 12VDC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CMD6-MD-R have a backup battery?\u003c\/strong\u003e Yes, the Fireboy-Xintex CMD6-MD-R includes an internal backup battery that keeps the detector working during a power outage, with an approximate 7-year life expectancy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAt what CO level does the alarm trigger?\u003c\/strong\u003e The CMD6-MD-R sounds its alarm at 10% COHb, using an electrochemical sensor for immediate and accurate detection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow loud is the alarm horn?\u003c\/strong\u003e The alarm horn on the CMD6-MD-R produces 85 dBA, loud enough to alert everyone aboard the vessel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the CMD6-MD-R shut down a generator automatically?\u003c\/strong\u003e Yes, an internal relay in the CMD6-MD-R allows it to trigger a generator shutdown or send a signal to an external device when CO is detected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I connect more than one detector together?\u003c\/strong\u003e Multiple CMD6-MD-R units can be interconnected so an alarm triggered at one location sounds at every connected unit, giving full-vessel protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the CMD6-MD-R?\u003c\/strong\u003e The CMD6-MD-R measures 3.5 inches by 3.5 inches by 1.21 inches, a compact size intended for inconspicuous mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CMD6-MD-R weigh?\u003c\/strong\u003e The CMD6-MD-R weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat sensor technology does the CMD6-MD-R use?\u003c\/strong\u003e It uses an electrochemical sensor combined with stable sensing logic to deliver immediate alarms while reducing false alarms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the CMD6-MD-R?\u003c\/strong\u003e The Fireboy-Xintex CMD6-MD-R carries a 1 year limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CMD6-MD-R hardwired or battery only?\u003c\/strong\u003e The CMD6-MD-R runs on the vessel's 12\/24V DC power with an internal backup battery for outages, rather than being a standalone battery-only unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the CMD6-MD-R and a battery-powered CO detector?\u003c\/strong\u003e The CMD6-MD-R is a 12\/24V DC powered detector with a backup battery for outages, while a battery-only version relies solely on an internal lithium battery as its primary power source.\u003c\/p\u003e","brand":"Fireboy-Xintex","offers":[{"title":"Default Title","offer_id":49027475177691,"sku":"F-B-CMD6-MD-R","price":147.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/F-B-CMD6-MB-R__31708.1739475424.500.750.jpg?v=1785164216"},{"product_id":"safe-t-alert-mgd-10xl-marine-gas-propane-fume-detector-surface-mount","title":"Safe-T-Alert MGD-10XL Marine Gas\/Propane Fume Detector, Surface Mount","description":"\u003cp\u003eThe Safe-T-Alert MGD-10XL Marine Gas\/Propane Fume Detector protects your boat from gas and propane spills or leaks by monitoring the bilge or engine compartment during and after fueling. The remote sensor can also be installed in the galley or LP tank locker to guard against propane leaks in living spaces. It detects gasoline, propane, alcohol, acetone, hydrogen, and most other flammable gases before they reach dangerous concentrations.\u003c\/p\u003e\u003cp\u003eA dual signaling system gives both an audible sound alarm and a visual warning light, so the alert is noticeable whether you are on deck or below. The built-in Smart Sensor continuously monitors for the buildup of explosive gases, and the On\/Off\/Test button lets you run a one-touch check of detector performance at any time. The unit is designed and built specifically for the vibration, humidity, and temperature swings of a marine environment, and mounts to the surface rather than requiring a flush cutout.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Safe-T-Alert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MGD-10XL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 715456810102\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -22 degrees F to 160 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperational Voltage Range:\u003c\/strong\u003e 7-15 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Draw:\u003c\/strong\u003e 200 amps at 14 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3-1\/4 inches wide x 2-3\/4 inches long x 3\/4 inches deep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFumes Detected:\u003c\/strong\u003e Gasoline, propane, alcohol, acetone, hydrogen, and most flammable gases\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm Type:\u003c\/strong\u003e Sight and sound (audible alarm plus visual warning light)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Surface mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Safe-T-Alert MGD-10XL detect?\u003c\/strong\u003e The MGD-10XL detects gasoline, propane, alcohol, acetone, hydrogen, and most other flammable gases that can accumulate in a boat's bilge, engine compartment, galley, or LP tank locker.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the MGD-10XL alert you to a gas leak?\u003c\/strong\u003e It uses a dual signaling system that sounds an audible alarm and activates a visual warning light at the same time, so the alert can be noticed both by sound and by sight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MGD-10XL surface mounted or flush mounted?\u003c\/strong\u003e The MGD-10XL is a surface mount detector, so it installs onto a mounting surface rather than requiring a flush panel cutout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the MGD-10XL detector?\u003c\/strong\u003e The Safe-T-Alert MGD-10XL measures 3-1\/4 inches wide by 2-3\/4 inches long by 3\/4 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MGD-10XL weigh?\u003c\/strong\u003e The MGD-10XL weighs 1.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does the MGD-10XL require?\u003c\/strong\u003e It runs on a 12 VDC power supply with an operational voltage range of 7-15 VDC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the operating temperature range of the MGD-10XL?\u003c\/strong\u003e The MGD-10XL is rated to operate from -22 degrees F to 160 degrees F, making it suitable for harsh marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the On\/Off\/Test button do?\u003c\/strong\u003e On the MGD-10XL, the On\/Off\/Test button allows a one-touch check of the detector's alarm performance so you can confirm it is working correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the MGD-10XL be installed in the galley instead of the engine compartment?\u003c\/strong\u003e Yes, the MGD-10XL sensor can be installed in the galley or LP tank locker to protect against propane leaks in those areas, in addition to bilge or engine compartment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and material is the MGD-10XL housing?\u003c\/strong\u003e The Safe-T-Alert MGD-10XL has a black plastic housing designed for surface mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MGD-10XL use a smart sensor?\u003c\/strong\u003e Yes, the MGD-10XL includes a Smart Sensor that continuously monitors for the buildup of explosive gases in the monitored space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MGD-10XL built specifically for marine use?\u003c\/strong\u003e The MGD-10XL is designed and built specifically to hold up in marine environments, unlike general-purpose household gas detectors.\u003c\/p\u003e","brand":"Marine Technologies","offers":[{"title":"Default Title","offer_id":49028203774171,"sku":"MTI-MGD-10XL","price":244.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__40821.1763741545.500.750.jpg?v=1785165072"},{"product_id":"safe-t-alert-marine-gas-propane-vapor-detector-mti-mgd-1-with-remote-sensor-and-on-off-test-button","title":"Safe-T-Alert Marine Gas\/Propane Vapor Detector MTI-MGD-1 with Remote Sensor and On\/Off\/Test Button","description":"\u003cp\u003eThe Safe-T-Alert Marine Gas\/Propane Vapor Detector (MTI-MGD-1) is a flush-mount safety instrument built to warn boat owners of dangerous explosive vapor buildup before it becomes a hazard. Designed exclusively for marine use, it is engineered to survive harsh onboard environments while continuously monitoring for gasoline, hydrogen from batteries, propane, alcohol, acetone, CNG, and other explosive vapors.\u003c\/p\u003e\u003cp\u003eA remote sensor is used to help prevent accidents in the bilge or engine compartment during and after fueling, and the sensor can also be installed in the galley or an LP tank locker to guard against propane leaks in living spaces. The detector uses dual signaling, combining an audible sound alarm with a visual warning light so the alert can be recognized by sight or sound. Its smart sensor technology is tuned to detect the buildup of explosive gases and trigger an alarm once vapor levels reach 20 percent or less of the lower explosive limit of gasoline, propane, and CNG.\u003c\/p\u003e\u003cp\u003eOperation is kept simple with a single On\/Off\/Test button that allows a one-touch check of detector performance at any time. The unit is sized to fit a standard 2-1\/8 inch dash panel blank, making it a straightforward flush-mount installation in helm and cabin locations already prepped for a round instrument cutout.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Safe-T-Alert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MTI-MGD-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Marine Gas\/Propane Vapor Detector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Size:\u003c\/strong\u003e Fits standard 2-1\/8 inch dash panel blank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFumes Detected:\u003c\/strong\u003e Gasoline, hydrogen from batteries, propane, alcohol, acetone, CNG, and other explosive vapors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 200 milliamp (.2 amp)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperational Voltage Range:\u003c\/strong\u003e +\/- 15 percent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm Trigger:\u003c\/strong\u003e 20 percent or less of the lower explosive limit of gasoline, propane, and CNG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm Type:\u003c\/strong\u003e Dual signaling with audible sound alarm and visual warning light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e On\/Off\/Test button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 715456601113\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Safe-T-Alert MTI-MGD-1 detect?\u003c\/strong\u003e The Safe-T-Alert MTI-MGD-1 detects gasoline, hydrogen from batteries, propane, alcohol, acetone, CNG, and other explosive vapors, making it suited to monitoring bilge, engine compartment, galley, and LP tank locker areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should the MTI-MGD-1 sensor be installed?\u003c\/strong\u003e The remote sensor on the MTI-MGD-1 is typically installed in the bilge or engine compartment to catch fumes during and after fueling, or in the galley or LP tank locker to protect against propane leaks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the alarm alert the crew?\u003c\/strong\u003e The Safe-T-Alert MTI-MGD-1 uses dual signaling, combining an audible sound alarm with a visual warning light so the alert can be noticed by sight or sound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAt what level does the detector trigger an alarm?\u003c\/strong\u003e The MTI-MGD-1 triggers its alarm at 20 percent or less of the lower explosive limit of gasoline, propane, and CNG.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size cutout does this detector need?\u003c\/strong\u003e The MTI-MGD-1 is sized to fit a standard 2-1\/8 inch dash panel blank, so it installs into round instrument cutouts of that size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much power does the MTI-MGD-1 draw?\u003c\/strong\u003e This detector has a current draw of 200 milliamp (.2 amp) and runs on a 12 VDC power supply with an operational voltage range of +\/- 15 percent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I test that the MTI-MGD-1 is working?\u003c\/strong\u003e A single On\/Off\/Test button on the Safe-T-Alert MTI-MGD-1 allows a one-touch check of detector performance at any time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the MTI-MGD-1 built for marine use?\u003c\/strong\u003e Yes, the MTI-MGD-1 is designed exclusively for marine use and built to survive harsh onboard marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the MTI-MGD-1 weigh?\u003c\/strong\u003e The Safe-T-Alert MTI-MGD-1 weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the MTI-MGD-1 detect battery-related hazards?\u003c\/strong\u003e Yes, along with gasoline and propane, the MTI-MGD-1 is designed to detect hydrogen given off by batteries.\u003c\/p\u003e","brand":"Marine Technologies","offers":[{"title":"Default Title","offer_id":49028203806939,"sku":"MTI-MGD-1","price":133.87,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__11733.1763741545.500.750.jpg?v=1785165072"},{"product_id":"safe-t-alert-62-carbon-monoxide-alarm-white-flush-mount-with-trim-ring-12-volt-hardwire-mwd-62-542-wt-tr","title":"Safe-T-Alert 62 Carbon Monoxide Alarm, White Flush Mount with Trim Ring, 12 Volt Hardwire, MWD-62-542-WT-TR","description":"\u003cp\u003eThe Safe-T-Alert 62 Carbon Monoxide Alarm (MWD-62-542-WT-TR) is a flush-mount, hardwired CO detector built specifically to operate reliably in the harsh conditions found on board a boat, where temperature swings and vibration can compromise ordinary household detectors. It runs on 13.8 VDC power with a low current draw of 37 mA, and it draws an alarm point at 400 PPM, sounding within 4 to 15 minutes of detecting that concentration. A rapid recovery sensor allows the mute circuit to temporarily silence the alarm while the cabin is ventilated, then automatically reactivates the alarm if dangerous CO levels return. A memory scan feature retains the CO level that triggered the alarm, so the reading that caused the activation is not lost once the air clears. The alarm is designed with a 5 year service life and will automatically signal an end-of-life warning once that cycle is complete, prompting timely replacement. Its flush mount housing is finished in white and ships with a trim ring that gives a clean, finished look while covering existing screw holes and cutouts from a prior installation. The unit also includes a low voltage warning at 7 volts and operates across a wide -40 to 158 degree F range, and it conforms to ANSI\/UL STD 2034.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Safe-T-Alert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MWD-62-542-WT-TR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Carbon Monoxide Alarm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Flush mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 12 VDC, 13.8 VDC nominal, 37 mA current draw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Voltage Warning:\u003c\/strong\u003e 7 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -40 to 158 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm Point:\u003c\/strong\u003e 400 PPM, activates in 4 to 15 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperational Voltage Range:\u003c\/strong\u003e 13.8 volts, plus or minus 15 percent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Dimensions:\u003c\/strong\u003e 4.5 inches W x 3.25 inches H x 1.25 inches D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Trim ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Life:\u003c\/strong\u003e 5 years, with automatic end-of-life alert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e ANSI\/UL STD 2034\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 715456625423\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Safe-T-Alert 62 carbon monoxide alarm detect and at what level?\u003c\/strong\u003e The Safe-T-Alert 62 (MWD-62-542-WT-TR) alarms at 400 PPM of carbon monoxide, sounding within 4 to 15 minutes of reaching that concentration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Safe-T-Alert 62 battery powered or hardwired?\u003c\/strong\u003e It is a hardwired unit that runs on 12 VDC power, drawing 37 mA at 13.8 VDC, with a low voltage warning that triggers at 7 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this carbon monoxide alarm installed?\u003c\/strong\u003e The MWD-62-542-WT-TR is a flush mount alarm, and it ships with a trim ring that covers existing screw holes or cutouts for a clean finished look, so it can drop into a previously used mounting location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat operating temperature range can the Safe-T-Alert 62 handle?\u003c\/strong\u003e It operates across -40 to 158 degrees F, which covers the temperature extremes typical of a boat's cabin or storage conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does the Safe-T-Alert 62 last before it needs to be replaced?\u003c\/strong\u003e It has a 5 year service life, after which it automatically signals an end-of-life warning to alert the owner that it is time to replace the unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the alarm be muted while the cabin is being ventilated?\u003c\/strong\u003e Yes, the Safe-T-Alert 62 has a mute circuit that can be activated to temporarily silence the alarm, and a rapid recovery sensor will reactivate it automatically if dangerous CO levels return.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Safe-T-Alert 62 remember what triggered a past alarm?\u003c\/strong\u003e Yes, its memory scan feature retains the CO level that activated the alarm, preserving that reading even after the air clears.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Safe-T-Alert 62 require to operate?\u003c\/strong\u003e It operates at 13.8 volts, plus or minus 15 percent, and issues a low voltage power warning if the supply drops to 7 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat certification does this carbon monoxide alarm meet?\u003c\/strong\u003e The Safe-T-Alert 62 conforms to ANSI\/UL STD 2034, the standard for carbon monoxide alarms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the case dimensions of the Safe-T-Alert 62?\u003c\/strong\u003e The case measures 4.5 inches wide by 3.25 inches high by 1.25 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Safe-T-Alert 62 come with a trim ring?\u003c\/strong\u003e Yes, a trim ring is included with the MWD-62-542-WT-TR to give a finished look while hiding existing mounting holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Safe-T-Alert 62 weigh?\u003c\/strong\u003e The Safe-T-Alert 62 carbon monoxide alarm weighs 1 pound.\u003c\/p\u003e","brand":"Marine Technologies","offers":[{"title":"Default Title","offer_id":49028203839707,"sku":"MTI-62-542-WT-TR","price":68.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__97393.1758311099.500.750.jpg?v=1785165072"},{"product_id":"fx-4-marine-carbon-monoxide-alarm-white-surface-mount-12-vdc-hard-wire-for-marine-use","title":"FX-4-Marine Carbon Monoxide Alarm, White Surface Mount 12 VDC Hard-Wire for Marine Use","description":"\u003cp\u003eThe FX-4-Marine Carbon Monoxide Alarm is a hard-wired, 12 vDC carbon monoxide detector listed for marine use, designed to warn boat owners and passengers of dangerous CO buildup in cabins, engine compartments, and other enclosed spaces aboard a vessel. It is finished in white and installs as a surface-mount unit, making it suitable for cabin walls, helm stations, or other flat interior surfaces where a visible, permanently wired alarm is needed. Because it runs on the boat's 12 vDC electrical system rather than disposable batteries, it is intended to operate continuously as part of the vessel's onboard safety systems, reducing the risk of a dead-battery gap in protection that can occur with battery-only alarms. As a unit specifically listed for marine use, it is built to handle the environment aboard a boat, where humidity, vibration, and engine exhaust make carbon monoxide monitoring especially important. This alarm is a straightforward safety addition for any boat with an enclosed cabin, generator, or inboard\/outboard engine where exhaust gases could accumulate. It is compact and lightweight at 0.5 pounds, simplifying mounting in tight marine interior spaces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e FX-4-Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e FX-4-Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Carbon Monoxide Alarm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Listed for marine use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 12 vDC, hard wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 715456625478\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the FX-4-Marine alarm rated for use on a boat?\u003c\/strong\u003e Yes, the FX-4-Marine Carbon Monoxide Alarm is listed for marine use, meaning it is intended for installation aboard boats rather than only in homes or RVs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the FX-4-Marine carbon monoxide alarm powered?\u003c\/strong\u003e It is hard-wired into the boat's 12 vDC electrical system rather than running on disposable batteries, so it draws power continuously from the vessel's onboard DC circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the FX-4-Marine alarm and will it match my cabin interior?\u003c\/strong\u003e The FX-4-Marine Carbon Monoxide Alarm has a white housing, a neutral finish intended to blend with typical boat cabin surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the FX-4-Marine alarm mounted?\u003c\/strong\u003e This unit is a surface-mount alarm, meaning it attaches directly to a flat interior surface such as a cabin wall or bulkhead rather than requiring a flush cutout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the FX-4-Marine carbon monoxide alarm weigh?\u003c\/strong\u003e The FX-4-Marine Carbon Monoxide Alarm weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the FX-4-Marine alarm require battery replacement?\u003c\/strong\u003e No, because it is a hard-wired 12 vDC unit, there is no battery to replace as long as it remains connected to the boat's electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should a carbon monoxide alarm like the FX-4-Marine be installed on a boat?\u003c\/strong\u003e As a surface-mount unit listed for marine use, the FX-4-Marine alarm is designed to be installed on an interior cabin surface where it can monitor enclosed living or helm spaces for carbon monoxide buildup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the FX-4-Marine alarm different from a household carbon monoxide detector?\u003c\/strong\u003e Yes, unlike typical battery-powered household units, the FX-4-Marine Carbon Monoxide Alarm is listed specifically for marine use and is hard-wired to a 12 vDC supply rather than running on batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for this carbon monoxide alarm?\u003c\/strong\u003e This alarm is identified by the part number FX-4-Marine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the FX-4-Marine alarm be installed at the helm as well as the cabin?\u003c\/strong\u003e As a surface-mount 12 vDC hard-wire unit, the FX-4-Marine alarm can be mounted on any suitable flat interior surface aboard the boat, including a helm station or cabin wall.\u003c\/p\u003e","brand":"- None -","offers":[{"title":"Default Title","offer_id":49031064715483,"sku":"MTI-FX-4-Marine","price":69.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1-Recovered__89628.1746023097.500.750.jpg?v=1785329063"},{"product_id":"rv-propane-alarm-white-surface-mount-12-vdc-hard-wire-part-20-441-p-wt","title":"RV Propane Alarm - White Surface Mount, 12 VDC Hard-Wire, Part 20-441-P-WT","description":"\u003cp\u003eThis RV propane alarm is a surface-mounted, hard-wired safety device built to detect propane (LP gas) leaks inside a recreational vehicle. It runs on a 12 vDC electrical supply and is wired directly into the RV's 12-volt system rather than relying on replaceable batteries, giving it a permanent, always-on connection to power whenever the RV's electrical system is live. The unit is finished in white and mounted to a wall or panel surface, making it suited to installation in galley, cabin, or utility areas where propane-fueled appliances (stoves, refrigerators, water heaters, furnaces) are present and a leak could otherwise go unnoticed.\u003c\/p\u003e\u003cp\u003eAs a hard-wired, surface-mount design, the alarm avoids the maintenance concern of a battery-only detector losing power unexpectedly, since it draws directly from the RV's 12 vDC circuit. It is identified by manufacturer part number 20-441-P-WT and is a lightweight component at 0.5 pounds, keeping installation straightforward on interior wall surfaces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Not Specified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 20-441-P-WT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Propane (LP) Gas Alarm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Input:\u003c\/strong\u003e 12 vDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring Type:\u003c\/strong\u003e Hard Wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 715456204413\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 20-441-P-WT alarm detect?\u003c\/strong\u003e Part number 20-441-P-WT is a propane (LP gas) alarm, designed to detect propane gas leaks inside an RV rather than smoke or carbon monoxide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this alarm battery powered or hard-wired?\u003c\/strong\u003e This propane alarm is hard-wired and runs on 12 vDC power, connecting directly into the RV's 12-volt electrical system rather than using replaceable batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 20-441-P-WT propane alarm require?\u003c\/strong\u003e It operates on 12 vDC, matching the standard low-voltage electrical system found in most RVs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this propane alarm mounted?\u003c\/strong\u003e The 20-441-P-WT is a surface-mount unit, meaning it is installed directly onto a wall or panel surface rather than recessed into it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 20-441-P-WT alarm?\u003c\/strong\u003e This propane alarm has a white housing, which is intended to blend in with typical RV interior wall finishes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 20-441-P-WT propane alarm weigh?\u003c\/strong\u003e The unit weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 20-441-P-WT propane alarm need batteries to function?\u003c\/strong\u003e No, this is a hard-wired 12 vDC unit rather than a battery-operated alarm, so it draws power from the RV's electrical system whenever it is live.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 20-441-P-WT the same as a smoke or carbon monoxide detector?\u003c\/strong\u003e No, this device is specifically a propane (LP gas) alarm, not a smoke detector or a carbon monoxide detector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for this RV propane alarm?\u003c\/strong\u003e The manufacturer part number for this white, surface-mount, 12 vDC hard-wired propane alarm is 20-441-P-WT.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should the 20-441-P-WT propane alarm be installed in an RV?\u003c\/strong\u003e Because it is a surface-mount, hard-wired 12 vDC unit, it is intended for wall or panel installation in areas of the RV where propane-fueled appliances are used.\u003c\/p\u003e","brand":"- None -","offers":[{"title":"Default Title","offer_id":49031064748251,"sku":"MTI-20-441-P-WT","price":51.31,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__89309.1747363865.500.750.jpg?v=1785329063"},{"product_id":"carbon-monoxide-alarm-black-surface-mount-12-vdc-hard-wire-part-number-62-541-bl","title":"Carbon Monoxide Alarm, Black Surface Mount, 12 VDC Hard Wire, Part Number 62-541-BL","description":"\u003cp\u003eThis carbon monoxide alarm is a 12 VDC hard-wired unit designed for permanent surface mounting, making it suited to boats, RVs, and other 12-volt DC environments where a continuous power source is available. Finished in black, it mounts directly to a wall or bulkhead surface rather than plugging into an outlet, and it wires into an existing 12 VDC circuit for continuous power without battery replacement. Its function is to monitor the surrounding air and alert occupants to the presence of carbon monoxide, an odorless and colorless gas that can build up in enclosed spaces such as cabins and living quarters. At 0.5 pounds, it is a lightweight, compact unit intended for straightforward hard-wire installation. This alarm is identified by part number 62-541-BL.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Generic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 62-541-BL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Carbon Monoxide Alarm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e 12 VDC hard-wired\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 715456615448\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs this carbon monoxide alarm battery powered or hard-wired?\u003c\/strong\u003e The 62-541-BL carbon monoxide alarm is hard-wired to a 12 VDC power source rather than running on batteries, so it draws continuous power once installed and does not require battery replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 62-541-BL alarm installed?\u003c\/strong\u003e It is a surface-mount unit, meaning it attaches directly to a wall or bulkhead surface and is wired into an existing 12 VDC circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this carbon monoxide alarm?\u003c\/strong\u003e This carbon monoxide alarm, part number 62-541-BL, has a black finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 62-541-BL carbon monoxide alarm weigh?\u003c\/strong\u003e It weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this alarm require?\u003c\/strong\u003e The 62-541-BL alarm operates on 12 VDC power, making it suited to boats, RVs, and other vehicles or vessels with a 12-volt DC electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does this device detect?\u003c\/strong\u003e Part number 62-541-BL is a carbon monoxide alarm, designed to monitor the surrounding air and alert occupants when carbon monoxide is present.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this alarm be mounted anywhere, or does it need a specific location?\u003c\/strong\u003e It is a surface-mount, hard-wired 12 VDC unit, so it must be installed at a location with access to a 12 VDC circuit for wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The UPC for the 62-541-BL carbon monoxide alarm is 715456615448.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this alarm plug into a standard outlet?\u003c\/strong\u003e No, the 62-541-BL is hard-wired into a 12 VDC circuit rather than plugging into a standard AC outlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this alarm suitable for marine use?\u003c\/strong\u003e Its 12 VDC hard-wired design makes the 62-541-BL suited to marine and RV environments that run on 12-volt DC power.\u003c\/p\u003e","brand":"- None -","offers":[{"title":"Default Title","offer_id":49031207747803,"sku":"MTI-62-541-BL","price":65.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__50118.1746023370.500.750.jpg?v=1785328993"},{"product_id":"safe-t-alert-35-741-wt-dual-lp-co-alarm-12v-hard-wired-surface-mount-white","title":"Safe-T-Alert 35-741-WT Dual LP\/CO Alarm, 12V Hard-Wired Surface Mount, White","description":"\u003cp\u003eThe Safe-T-Alert 35-741-WT is a combination carbon monoxide (CO) and propane (LP) gas alarm built for RV and motor home environments. It detects both gas leaks and carbon monoxide simultaneously in a single unit, giving occupants an early warning against two of the most common onboard hazards without needing separate detectors. The alarm is hard-wired to a 12 volt DC power source, which means there are no batteries to replace or forget, and no risk of the unit going dead or being accidentally disconnected.\u003c\/p\u003e\u003cp\u003eThe 35-741-WT is a 35 Series surface-mount model finished in white, with a plastic enclosure designed to blend into typical RV interior surfaces. It provides an audible alarm and is listed to UL 1484 RV and UL 2034 RV, and meets RVIA\/NFPA requirements for RV safety equipment. This makes it suitable as a factory-spec replacement or upgrade for RVs and motor homes that require a certified dual-gas detector rather than two separate single-purpose alarms.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Safe-T-Alert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 35-741-WT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Combination LP Gas\/Carbon Monoxide Alarm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Surface Mount, 35 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e 12V DC, hard-wired\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm Type:\u003c\/strong\u003e Audible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e UL 1484 RV, UL 2034 RV; meets RVIA\/NFPA requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 6-3\/8 inches wide x 3-1\/2 inches high x 1-77\/200 inches deep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 715456357416\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Safe-T-Alert 35-741-WT detect?\u003c\/strong\u003e The 35-741-WT detects both carbon monoxide (CO) and propane (LP) gas simultaneously in a single unit, rather than requiring two separate alarms for RV or motor home safety monitoring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 35-741-WT battery powered?\u003c\/strong\u003e No, the 35-741-WT is a 12 volt DC hard-wired model, so there are no batteries to replace and no risk of the alarm going dead or being accidentally unplugged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 35-741-WT mounted?\u003c\/strong\u003e This alarm is a 35 Series surface-mount unit, installed directly onto an interior wall or surface rather than flush-mounted into a cutout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 35-741-WT alarm?\u003c\/strong\u003e The 35-741-WT is finished in white to blend with typical RV and motor home interior surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 35-741-WT?\u003c\/strong\u003e The unit measures 6-3\/8 inches wide by 3-1\/2 inches high by 1-77\/200 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 35-741-WT weigh?\u003c\/strong\u003e The Safe-T-Alert 35-741-WT weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 35-741-WT enclosure made of?\u003c\/strong\u003e The alarm housing is made of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 35-741-WT certified for RV use?\u003c\/strong\u003e Yes, it is listed to UL 1484 RV and UL 2034 RV and meets RVIA\/NFPA requirements for RV safety alarms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of alarm signal does the 35-741-WT give?\u003c\/strong\u003e The 35-741-WT provides an audible alarm to alert occupants when it detects carbon monoxide or propane gas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 35-741-WT suitable for a motor home?\u003c\/strong\u003e Yes, the 35-741-WT is built to operate inside RV and motor home environments as a combination CO and propane gas detector.\u003c\/p\u003e","brand":"- None -","offers":[{"title":"Default Title","offer_id":49031207878875,"sku":"MTI-35-741-WT","price":85.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51G-HB1mpYL.jpg?v=1785212016"},{"product_id":"fireboy-xintex-p-1b-r-propane-gas-detector-1-zone-for-boats","title":"Fireboy-Xintex P-1B-R Propane Gas Detector, 1 Zone, for Boats","description":"\u003cp\u003eThe Fireboy-Xintex P-1B-R is a single-zone propane gas detector built to monitor for the presence of propane in an enclosed boat space, such as an engine compartment, galley, or bilge area near LPG appliances or fuel storage. Propane is heavier than air and can collect in low points of a vessel, creating a fire and explosion hazard if it goes undetected; a dedicated gas detector like the P-1B-R provides continuous monitoring so that a leak can be identified before it becomes dangerous. As a 1-zone unit, the P-1B-R monitors a single sensing location, making it suited to smaller boats or applications where only one compartment needs propane gas monitoring, as opposed to multi-zone systems that cover several spaces from one control head.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Fireboy-Xintex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e P-1B-R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Propane Gas Detector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZones Monitored:\u003c\/strong\u003e 1 zone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Alarms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 619749202639\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Fireboy-Xintex P-1B-R detect?\u003c\/strong\u003e The P-1B-R is a propane gas detector that monitors a boat space for the presence of propane, alerting before a leak reaches a dangerous concentration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many zones does the P-1B-R monitor?\u003c\/strong\u003e This is a 1-zone unit, meaning the Fireboy-Xintex P-1B-R monitors a single sensing location on the boat rather than multiple compartments at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the P-1B-R suitable for a boat with more than one compartment to monitor?\u003c\/strong\u003e Because the P-1B-R is a single-zone detector, it covers one monitored space; boats needing coverage in multiple compartments would require additional zone capability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Fireboy-Xintex P-1B-R weigh?\u003c\/strong\u003e The P-1B-R propane detector weighs 1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of marine equipment does the P-1B-R fall under?\u003c\/strong\u003e The Fireboy-Xintex P-1B-R is classified as a boat alarm, specifically a propane gas detection alarm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is propane detection important on a boat?\u003c\/strong\u003e Propane is heavier than air and can settle in low, enclosed areas of a boat such as the bilge or engine compartment, creating a fire or explosion risk if a leak goes unnoticed; the P-1B-R is designed to monitor for that condition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the P-1B-R made by Fireboy-Xintex?\u003c\/strong\u003e Yes, part number P-1B-R is manufactured by Fireboy-Xintex.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Fireboy-Xintex P-1B-R?\u003c\/strong\u003e The Fireboy-Xintex P-1B-R propane detector carries UPC 619749202639.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere would a P-1B-R typically be installed on a boat?\u003c\/strong\u003e As a propane detector, the P-1B-R is intended for installation in an enclosed space where propane could accumulate, such as near a galley appliance, fuel locker, or engine compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the P-1B-R a single-zone or multi-zone alarm system?\u003c\/strong\u003e The P-1B-R is a single-zone (1 zone) alarm, monitoring one location for propane gas presence.\u003c\/p\u003e","brand":"Fireboy-Xintex","offers":[{"title":"Default Title","offer_id":49031624130779,"sku":"F-B-P-1B-R","price":352.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/P-1B-R__94332.1739462992.500.750.jpg?v=1785329067"},{"product_id":"fireboy-xintex-g-1b-r-gasoline-detector-1-zone-marine-alarm","title":"Fireboy-Xintex G-1B-R Gasoline Detector, 1 Zone Marine Alarm","description":"\u003cp\u003eThe Fireboy-Xintex G-1B-R is a single-zone gasoline detector built to monitor for the presence of gasoline vapors aboard a boat. As a dedicated boat alarm, it provides a single detection zone, making it suited to alerting the operator to a gasoline vapor hazard so it can be addressed before it becomes a fire or explosion risk. Gasoline vapor detection is a critical safety measure on gasoline-powered boats, where vapors can accumulate in enclosed spaces such as the bilge or engine compartment.\u003c\/p\u003e\u003cp\u003eThe G-1B-R carries the Fireboy-Xintex brand name that boat owners rely on for onboard fire and gas safety equipment. It is cataloged under boat alarms and is identified by manufacturer part number G-1B-R.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Fireboy-Xintex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e G-1B-R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Gasoline Detector, 1 Zone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Alarms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZones:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 619749202516\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Fireboy-Xintex G-1B-R do?\u003c\/strong\u003e The G-1B-R is a gasoline detector that monitors for gasoline vapors aboard a boat, functioning as part of the boat's onboard alarm system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many detection zones does the G-1B-R cover?\u003c\/strong\u003e The Fireboy-Xintex G-1B-R is a 1-zone gasoline detector, meaning it monitors a single detection zone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the G-1B-R weigh?\u003c\/strong\u003e The Fireboy-Xintex G-1B-R gasoline detector weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is the G-1B-R gasoline detector?\u003c\/strong\u003e Part number G-1B-R is manufactured by Fireboy-Xintex.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of marine equipment is the G-1B-R classified under?\u003c\/strong\u003e The G-1B-R is classified as a boat alarm, specifically a gasoline detector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the G-1B-R a genuine Fireboy-Xintex product?\u003c\/strong\u003e Yes, part number G-1B-R is a genuine Fireboy-Xintex gasoline detector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Fireboy-Xintex G-1B-R?\u003c\/strong\u003e The Fireboy-Xintex G-1B-R gasoline detector carries UPC 619749202516.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would a boat need a gasoline detector like the G-1B-R?\u003c\/strong\u003e Gasoline detectors such as the G-1B-R are used to monitor for gasoline vapors on gasoline-powered boats, providing a safety alert before vapors become a hazard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the G-1B-R designed for a single zone or multiple zones?\u003c\/strong\u003e The G-1B-R is specifically a 1-zone unit, distinguishing it from multi-zone Fireboy-Xintex gasoline detection systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat part number should I order for a single-zone Fireboy-Xintex gasoline detector?\u003c\/strong\u003e Order part number G-1B-R for the single-zone Fireboy-Xintex gasoline detector.\u003c\/p\u003e","brand":"Fireboy-Xintex","offers":[{"title":"Default Title","offer_id":49031624098011,"sku":"F-B-1B-R","price":341.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/1B-R__45476.1739462990.500.750.jpg?v=1785329066"},{"product_id":"fireboy-xintex-cmd6-mb-battery-powered-carbon-monoxide-detector-available-in-white-or-black","title":"Fireboy-Xintex CMD6-MB Battery-Powered Carbon Monoxide Detector, Available in White or Black","description":"\u003cp\u003eThe Fireboy-Xintex CMD6-MB is a battery-operated marine carbon monoxide detector engineered to protect boaters from the dangers of CO exposure in enclosed cabins, engine rooms, and living spaces aboard. Powered entirely by a maintenance-free internal lithium battery rated for approximately 7 years of service, this detector requires no wiring, making installation simple in any location where CO accumulation is a risk. Its electrochemical sensor delivers fast, stable detection while resisting false alarms common with lower-quality sensors. When CO reaches a 10% COHb alarm point, the unit sounds an 85 dBA horn and can trigger an internal relay for generator shutdown or connection to an external signal. Multiple CMD6-MB units can be interconnected across the vessel so that one detection event alerts everyone on board, regardless of which cabin or compartment triggered the alarm. The compact, low-profile housing is available in White or Black to blend with different interior finishes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fireboy-Xintex\u003c\/li\u003e\n\u003cli\u003eFume Type: Carbon Monoxide\u003c\/li\u003e\n\u003cli\u003eSensor Type: Electrochemical\u003c\/li\u003e\n\u003cli\u003ePower Source: Internal lithium battery (maintenance-free)\u003c\/li\u003e\n\u003cli\u003eBattery Life Expectancy: Approximately 7 years\u003c\/li\u003e\n\u003cli\u003eAlarm Point: 10% COHb\u003c\/li\u003e\n\u003cli\u003eAlarm Horn: 85 dBA\u003c\/li\u003e\n\u003cli\u003eInternal Relay: Yes, for generator shutdown or external signal\u003c\/li\u003e\n\u003cli\u003eInterconnect Capability: Yes, for multi-unit vessel protection\u003c\/li\u003e\n\u003cli\u003eControl: Microprocessor controlled\u003c\/li\u003e\n\u003cli\u003eDimensions: 3.5 in x 3.5 in x 1.21 in\u003c\/li\u003e\n\u003cli\u003eMaterial: Plastic\u003c\/li\u003e\n\u003cli\u003eWeight: 1 pound\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThe CMD6-MB is offered in two color finishes, White and Black, so you can match the detector to your boat's cabin decor or existing electronics panel. Both colors share identical sensing performance, battery life, alarm behavior, and interconnect capability -- the choice is purely aesthetic. Select the finish that best complements your helm, salon, or berth area.\u003c\/p\u003e","brand":"Fireboy-Xintex","offers":[{"title":"White","offer_id":49049228247259,"sku":"F-B-CMD6-MB-R","price":147.06,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":49049228280027,"sku":"F-B-CMD6-MB-BR","price":147.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/F-B-CMD6-MB-R__31359.1739475423.500.750_9eba9800-606a-46d5-ac6e-f03badcb3778.jpg?v=1785456521"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/1B-R__45476.1739462990.500.750_86dd6969-7e3a-49c0-981d-ef6cdd43cfba.jpg?v=1785356964","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-safety-navigation-equipment-fire-safety-alarms-carbon-monoxide-gas-detectors.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}