{"title":"Hydraulic Steering Helms \u0026 Cylinders","description":null,"products":[{"product_id":"sierra-18-7508-power-steering-pump-for-mercruiser-mcm-mie-gm-v6-v8-283-305-350-cid-replaces-16792a39","title":"Sierra 18-7508 Power Steering Pump, Replaces 16792A39, 16792A33, MerCruiser MCM\/MIE GM V6 \u0026 V8 283\/305\/350 cid Engines","description":"\u003cp\u003eThe Sierra 18-7508 is a marine power steering pump built as a direct replacement for MerCruiser MCM\/MIE stern drive applications powered by GM V6 and V8 engines in the 283, 305, and 350 cubic inch displacement range. It is engineered to meet or exceed OEM performance, supplying the hydraulic pressure needed to actuate the sterndrive's steering cylinder and deliver reliable, consistent steering response at the helm.\u003c\/p\u003e\u003cp\u003eThis pump is a bolt-on replacement designed to install using the same mounting points and drive configuration as the original equipment pump it replaces, so it drops into the existing power steering circuit without modification. It is finished in white and ships as a single unit ready for installation. Every Sierra power steering pump is backed by Sierra's industry leading warranty, giving boat owners confidence that a failed or worn original pump can be swapped for a unit built to the same standard.\u003c\/p\u003e\u003cp\u003eBecause steering response and safety depend on a properly functioning pump, replacing a worn, leaking, or noisy power steering pump with the 18-7508 restores factory-level steering feel on GM-powered MerCruiser MCM\/MIE sterndrive boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7508\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Engine Parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.18 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 9.9 x 9.8 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282287221\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e MerCruiser MCM\/MIE GM V6 \u0026amp; V8 (283, 305 \u0026amp; 350 cid) engines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMerCruiser MCM\/MIE sterndrives with GM V6 \u0026amp; V8 (283, 305 \u0026amp; 350 cid) engines\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e16792A39\u003c\/li\u003e\n\u003cli\u003e16792A33\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boats and engines does the Sierra 18-7508 power steering pump fit?\u003c\/strong\u003e The Sierra 18-7508 is built for MerCruiser MCM\/MIE sterndrives powered by GM V6 and V8 engines in the 283, 305, and 350 cubic inch displacement range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-7508 replace?\u003c\/strong\u003e This pump replaces OEM numbers 16792A39 and 16792A33, so it can be used as a direct swap for either of those original part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-7508 an OEM or aftermarket power steering pump?\u003c\/strong\u003e It is an aftermarket replacement pump manufactured by Sierra and built to meet or exceed the original MerCruiser OEM specification for these applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-7508 power steering pump weigh?\u003c\/strong\u003e The pump weighs 10.18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-7508 power steering pump?\u003c\/strong\u003e It is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-7508?\u003c\/strong\u003e Each order includes one complete power steering pump, the Sierra 18-7508, ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-7508 come with a warranty?\u003c\/strong\u003e Yes, the Sierra 18-7508 is backed by Sierra's industry leading warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the 18-7508?\u003c\/strong\u003e The pump ships in packaging measuring 9.9 x 9.8 x 8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-7508 work on GM V8 350 cid MerCruiser applications?\u003c\/strong\u003e Yes, the 283, 305, and 350 cid GM V6 \u0026amp; V8 MCM\/MIE applications are all covered by the Sierra 18-7508.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of the 18-7508 straightforward for a DIY boat owner?\u003c\/strong\u003e The 18-7508 is designed as a direct replacement for the original MCM\/MIE power steering pump, so it mounts in the same location using the existing steering circuit connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my power steering pump needs replacing?\u003c\/strong\u003e Symptoms like stiff or inconsistent steering, pump noise, or fluid leaks on a MerCruiser MCM\/MIE GM V6 or V8 sterndrive typically indicate it is time to replace the pump with a unit like the Sierra 18-7508.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988386459867,"sku":"SIE-18-7508","price":637.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7508__50557.1753448931.500.750.jpg?v=1785188370"},{"product_id":"power-steering-pump-pulley-for-v-belt-sterndrives-replaces-73873a1-73873-sierra-18-8297","title":"Sierra Power Steering Pump Pulley 18-8297, Sterndrives with V-Belt, Replaces 73873A1, 73873","description":"\u003cp\u003eThe Sierra 18-8297 is a power steering pump pulley built for sterndrive engines equipped with a v-belt drive system. It mounts to the power steering pump shaft and, together with the drive belt, transfers rotational power from the engine to the pump so the steering system builds the hydraulic pressure needed for smooth helm response. This pulley is a direct fit for the v-belt sterndrive application it is designed for and is intended as a replacement for a worn, cracked, or damaged original pulley, or for a pulley that has developed excessive belt slip or wobble.\u003c\/p\u003e\u003cp\u003eReplacing a worn power steering pump pulley restores proper belt alignment and tension, which helps prevent belt squeal, premature belt wear, and inconsistent steering assist. Because it is designed specifically for v-belt sterndrive setups, it is not interchangeable with the serpentine-belt version of this pulley, so confirm your engine's belt type before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8297\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Power Steering Pump Pulley\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt Type:\u003c\/strong\u003e V-belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Sterndrives with v-belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.68 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 3 x 7.5 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282294960\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSterndrives with v-belt\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e73873A1\u003c\/li\u003e\n\u003cli\u003e73873\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-8297 pulley used for?\u003c\/strong\u003e The Sierra 18-8297 is a power steering pump pulley that mounts to the power steering pump shaft on a sterndrive engine equipped with a v-belt, transferring engine rotation to the pump to generate steering assist.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-8297 pulley work with a serpentine belt engine?\u003c\/strong\u003e No. The 18-8297 is built specifically for sterndrives with a v-belt drive; a serpentine-belt engine requires a different power steering pump pulley.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-8297 replace?\u003c\/strong\u003e The Sierra 18-8297 power steering pump pulley replaces OEM numbers 73873A1 and 73873.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-8297 pulley weigh?\u003c\/strong\u003e The Sierra 18-8297 power steering pump pulley weighs 1.68 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-8297 pulley?\u003c\/strong\u003e Product dimensions for the Sierra 18-8297 are 3 x 7.5 x 8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8297 a genuine OEM part or an aftermarket replacement?\u003c\/strong\u003e The 18-8297 is a Sierra-brand replacement pulley engineered to replace OEM numbers 73873A1 and 73873, not an original manufacturer part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace my power steering pump pulley?\u003c\/strong\u003e A pulley is typically replaced when it becomes worn, cracked, or damaged, or when belt slip and wobble develop, since a bad pulley can cause belt squeal and inconsistent steering assist. The 18-8297 restores proper belt alignment on v-belt sterndrive applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-8297 come with mounting hardware or a belt?\u003c\/strong\u003e The Sierra 18-8297 listing covers the power steering pump pulley itself; check your specific order details for whether hardware or a belt is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my sterndrive uses a v-belt or a serpentine belt?\u003c\/strong\u003e Check the belt routing on your engine: a v-belt is a single narrow grooved belt per pulley, while a serpentine belt is a wider single belt that snakes around multiple pulleys. The Sierra 18-8297 is for the v-belt configuration only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-8297 be installed as a direct replacement?\u003c\/strong\u003e Yes, the Sierra 18-8297 is designed as a direct replacement for the OEM pulley on sterndrives with a v-belt, matching the original 73873A1 and 73873 pulleys it replaces.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988433449179,"sku":"SIE-18-8297","price":74.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8297__22433.1558186722.500.750.jpg?v=1785188206"},{"product_id":"seastar-ha1205-pilot-retro-fit-kit-for-power-assist-steering-3-bolts-3-o-rings","title":"SeaStar HA1205 Pilot Retro Fit Kit for SeaStar Power Assist Hydraulic Steering","description":"\u003cp\u003eThe SeaStar HA1205 Pilot Retro Fit Kit lets you retrofit a SeaStar power assist unit to work with a SeaStar hydraulic pump, adding autopilot compatibility to your boat's power assist steering system. SeaStar Power Assist steering is designed for today's high horsepower engines, which are heavier and generate more propeller torque than earlier engines, creating steering loads that can be tiring and uncomfortable to hold at the wheel. By virtually eliminating these steering loads, the SeaStar Power Assist system gives boaters the same comfortable, effortless steering feel found in modern cars, even in demanding, high load applications, so the boat can be driven safely and easily by the whole family.\u003c\/p\u003e\u003cp\u003eThe HA1205 kit includes the hardware needed to complete the retrofit: 3 bolts and 3 O-rings. It is intended for use with a SeaStar hydraulic pump as part of installing pilot capability onto an existing SeaStar power assist steering unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HA1205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Pilot Retro Fit Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Helm Pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Retro Fit Kit (3 bolts, 3 O-rings)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957898036\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFor use with SeaStar hydraulic pump, to retrofit to a SeaStar power assist unit\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HA1205 used for?\u003c\/strong\u003e The HA1205 is a Pilot Retro Fit Kit used to retrofit a SeaStar power assist unit for use with a SeaStar hydraulic pump, enabling pilot (autopilot) compatibility on power assist hydraulic steering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the HA1205 kit?\u003c\/strong\u003e The kit includes 3 bolts and 3 O-rings, the hardware needed to complete the pilot retrofit onto the SeaStar power assist unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HA1205 work with any hydraulic pump?\u003c\/strong\u003e No, HA1205 is designed specifically for use with a SeaStar hydraulic pump as part of a SeaStar power assist steering setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HA1205 Pilot Retro Fit Kit weigh?\u003c\/strong\u003e The HA1205 weighs 0.16 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would a boat owner install a power assist retrofit kit like the HA1205?\u003c\/strong\u003e SeaStar Power Assist steering is built to handle the heavier weight and higher propeller torque of today's high horsepower engines, and installing the HA1205 pilot retrofit adds pilot compatibility to that power assist system so steering stays light and comfortable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HA1205 genuine SeaStar hardware?\u003c\/strong\u003e Yes, HA1205 is the manufacturer part number for the SeaStar Pilot Retro Fit Kit, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HA1205 kit include the power assist pump itself?\u003c\/strong\u003e No, the HA1205 kit only includes the retrofit hardware (3 bolts and 3 O-rings); it is used to adapt an existing SeaStar power assist unit and hydraulic pump, which are separate components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the HA1205 reduce steering effort on a high horsepower boat?\u003c\/strong\u003e The retrofit itself is for pilot compatibility, but it installs onto a SeaStar Power Assist system, which is designed to virtually eliminate steering loads caused by heavier, high torque engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the warranty on the HA1205?\u003c\/strong\u003e The SeaStar HA1205 Pilot Retro Fit Kit carries a 1 year limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many of each part are in the HA1205 kit?\u003c\/strong\u003e The HA1205 kit contains exactly 3 bolts and 3 O-rings, sold as a single retro fit kit (1 kit per package).\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989347414235,"sku":"TEL-HA1205","price":56.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/tel-ha1205_lg__90356.1558179855.500.750.jpg?v=1785189223"},{"product_id":"dometic-seastar-hc5312-3-inboard-hydraulic-steering-cylinder-ba-125-7-atm-universal-fit","title":"SeaStar HC5312-3 Inboard Steering Cylinder, BA 125 7 ATM, Single Engine","description":"\u003cp\u003eThe SeaStar HC5312-3 is an inboard hydraulic steering cylinder, model designation BA 125 7 ATM, built for single engine inboard steering systems. It is built and certified to meet the safety and quality requirements established by the American Boat \u0026amp; Yacht Council (ABYC) and the International Standards Organization (ISO), giving boat owners a steering cylinder that meets recognized marine industry standards. The cylinder is constructed of aluminum and is made in the United States.\u003c\/p\u003e\u003cp\u003eThis cylinder connects into a single engine hydraulic steering setup and is sized for factory stock inboard installations complying with recognized cylinder volume and helm displacement requirements. When plumbing the system, SeaStar outboard-style installations use either standard-length SeaStar hose (ordered in fixed foot lengths, not field-cuttable) or a 3\/8 inch diameter copper tube and hose kit; consult SeaStar for the correct plumbing option for your installation. For dual engine applications, a SeaStar or engine manufacturer tie bar is required in addition to the cylinder.\u003c\/p\u003e\u003cp\u003eThe HC5312-3 ships as a single cylinder unit and is intended to be installed by a qualified marine technician or experienced boat owner familiar with hydraulic steering systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HC5312-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e BA 125 7 ATM, Inboard Type\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Inboard Hydraulic Steering Cylinder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Configuration:\u003c\/strong\u003e Single Engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 28.5 x 4.5 x 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e ABYC and ISO compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957900487\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HC5312-3?\u003c\/strong\u003e It is a SeaStar inboard hydraulic steering cylinder, model BA 125 7 ATM, designed for single engine inboard steering applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HC5312-3 built to any recognized safety standard?\u003c\/strong\u003e Yes, the HC5312-3 is built and certified to meet the safety and quality requirements established by the American Boat \u0026amp; Yacht Council (ABYC) and the International Standards Organization (ISO).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the HC5312-3 cylinder made from?\u003c\/strong\u003e The HC5312-3 is constructed of aluminum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HC5312-3 weigh?\u003c\/strong\u003e The HC5312-3 weighs 5.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the HC5312-3?\u003c\/strong\u003e The item dimensions of the HC5312-3 are 28.5 x 4.5 x 3.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HC5312-3 be used on a dual engine boat?\u003c\/strong\u003e For dual engine applications, a SeaStar or engine manufacturer tie bar is required in addition to the steering cylinder; the HC5312-3 is configured as a single engine cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose or tubing options work with this steering system?\u003c\/strong\u003e SeaStar systems can be plumbed with standard-length SeaStar hose ordered in fixed foot lengths (not field-cuttable), or with a 3\/8 inch diameter copper tube and hose kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the HC5312-3 manufactured?\u003c\/strong\u003e The SeaStar HC5312-3 inboard steering cylinder is made in the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HC5312-3 suitable for a modified or high-performance installation?\u003c\/strong\u003e Standard SeaStar capacity recommendations apply to factory stock engines only; modified installations may require a higher capacity steering system than the HC5312-3, so contact SeaStar technical service if in doubt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cylinders come in the package?\u003c\/strong\u003e The HC5312-3 ships as a single steering cylinder unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the BA 125 7 ATM designation mean?\u003c\/strong\u003e BA 125 7 ATM is the model designation SeaStar uses for the HC5312-3 inboard type steering cylinder.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348167899,"sku":"TEL-HC5312-3","price":819.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71lzcNuzmJL.jpg?v=1784476982"},{"product_id":"seastar-hc5345-3-front-mount-outboard-hydraulic-steering-cylinder-8-34-cu-in-abyc-nmma-certified-twin-triple-engine-tilt","title":"SeaStar HC5345-3 Front Mount Outboard Steering Cylinder, 8.34 Cubic Inch, Single Engine","description":"\u003cp\u003eThe SeaStar HC5345-3 is a front mount hydraulic steering cylinder built for single-engine outboard boats. It connects the helm to the outboard's steering arm, converting hydraulic pressure from the helm pump into the mechanical force that turns the engine. The cylinder has an 8.34 cubic inch volume capacity and uses positionable stainless steel O-ring (ORB) fittings, which allow the hydraulic hose connections to be angled for easier routing during installation. Its end gland sealing system uses an 8-hole design intended to improve serviceability and to better resist repeated compression set in the marine environment. The cylinder also provides independent engine tilt, which is required for twin and triple engine installations even when only one cylinder is in use per engine.\u003c\/p\u003e\u003cp\u003eThe HC5345-3 is built and certified to meet standards established by the American Boat and Yacht Council (ABYC) and the International Standards Organization (ISO), and it meets ABYC and NMMA certification requirements. It is suited to cruisers, runabouts, center console boats, and offshore fishing boats. The cylinder is compatible with the SeaStar Power Assist pump (PA1200-2) for boats that want a lighter, automotive-style steering feel. SeaStar hydraulic steering systems, including this cylinder, are tested and certified for use with SeaStar hydraulic fluid and SeaStar hydraulic hoses; using non-certified fluid or hoses with this cylinder may void the warranty and could result in loss of steering control. The product is designed and manufactured in North America and is backed by a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HC5345-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e HC53453\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard Front Mount (O\/B FM) Power\/Manual Steering Cylinder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Type:\u003c\/strong\u003e Outboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Engine Mount, Front Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Application:\u003c\/strong\u003e Single engine installations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume Capacity:\u003c\/strong\u003e 8.34 cubic inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Horsepower Rating:\u003c\/strong\u003e 350 horsepower\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings:\u003c\/strong\u003e Positionable stainless steel O-ring (ORB) fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing System:\u003c\/strong\u003e 8-hole end gland sealing system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ABYC and NMMA certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Upgrade:\u003c\/strong\u003e SeaStar Power Assist pump (PA1200-2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957916754\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user warranty against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eIntended for single-engine outboard-powered boats not exceeding 75 mph, not running surface-piercing props, and not exceeding the maximum U.S. Coast Guard horsepower rating for the vessel. Maximum horsepower rating of 350 horsepower.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HC5345-3 used for?\u003c\/strong\u003e The HC5345-3 is a front mount hydraulic steering cylinder that connects the helm pump to a single outboard engine's steering arm, converting hydraulic pressure into the mechanical motion that steers the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HC5345-3 rated for twin or triple engine setups?\u003c\/strong\u003e The HC5345-3 is designed for single engine installations, though its independent engine tilt feature is also relevant on twin and triple engine boats where one cylinder is used per engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the volume capacity of this steering cylinder?\u003c\/strong\u003e The SeaStar HC5345-3 has an 8.34 cubic inch volume capacity, which factors into the number of helm turns lock-to-lock along with the helm selected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower rating for the HC5345-3?\u003c\/strong\u003e This cylinder is rated for outboard engines up to 350 horsepower.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fittings does the HC5345-3 use?\u003c\/strong\u003e It uses positionable stainless steel O-ring (ORB) fittings, which can be angled during installation to make hydraulic hose routing easier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HC5345-3 weigh?\u003c\/strong\u003e The HC5345-3 steering cylinder weighs 9.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HC5345-3 be used with a power steering system?\u003c\/strong\u003e Yes, the HC5345-3 is compatible with the SeaStar Power Assist pump (PA1200-2), which provides an automotive-style, fingertip-control steering feel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HC5345-3 differ from SeaStar's splashwell mount cylinder?\u003c\/strong\u003e Yes, the HC5345-3 is a front mount cylinder, which is distinct from SeaStar's splashwell mount cylinder (a different part number); the splashwell mount cylinder is not suitable for engines fitted with factory power steering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat certifications does the HC5345-3 meet?\u003c\/strong\u003e The HC5345-3 is built and certified to meet ABYC and ISO safety and quality standards and meets ABYC and NMMA certification requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fluid and hoses should be used with the HC5345-3?\u003c\/strong\u003e SeaStar hydraulic steering systems, including the HC5345-3 cylinder, are tested and certified for use only with SeaStar hydraulic fluid and SeaStar hydraulic hoses; using non-certified products may void the warranty and could cause loss of steering control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the HC5345-3?\u003c\/strong\u003e SeaStar backs the HC5345-3 with a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat types is the HC5345-3 suited for?\u003c\/strong\u003e The HC5345-3 is intended for cruisers, runabouts, center console boats, and offshore fishing boats with a single outboard engine.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348298971,"sku":"TEL-HC5345-3","price":891.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SeaStar-HC5345-3-Outboard-Steering-Cylinder__52830.1724258351.500.750.jpg?v=1785188192"},{"product_id":"seastar-baystar-1-1-front-mount-hydraulic-helm-hh4311-4-compact-marine-boat-steering-pump-with-3-4in-tapered-shaft","title":"SeaStar BayStar 1.1 Front Mount Hydraulic Helm HH4311-4, Compact Cylinder, 3\/4 Inch Tapered Shaft","description":"\u003cp\u003eThe SeaStar BayStar HH4311-4 is a front mount hydraulic steering helm built around a balanced, compact-design cylinder that fits most splashwells and delivers full engine movement. It is part of the BayStar 1.1 helm line and is packaged as a complete kit rather than a bare helm, so everything needed for the installation ships together: the helm, the cylinder, fittings, tubing, oil, a fill kit, and detailed instructions.\u003c\/p\u003e\u003cp\u003eThe helm itself uses a compact body with only a 5 inch footprint and requires just a 3 inch dash hole, whether the boat uses a standard dash or a tilt dash. For boats that want adjustable helm position, an optional five-position tilt helm is available for this system. Steering connects via a standard 3\/4 inch tapered steering shaft, and the kit is designed for fast, easy installation without extensive modification to the helm station.\u003c\/p\u003e\u003cp\u003eThis helm system meets A.B.Y.C. (American Boat and Yacht Council) standards and N.M.M.A. (National Marine Manufacturers Association) certification requirements, so it is suitable for builders and installers who need documented compliance for hydraulic steering systems. Because the cylinder is compact and the helm footprint is small, the HH4311-4 works well on boats with limited splashwell space or tight dash mounting areas where a full-size helm would not fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HH4311-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e BayStar 1.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Front Mount Hydraulic Helm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder Type:\u003c\/strong\u003e Balanced cylinder, compact design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Shaft:\u003c\/strong\u003e 3\/4 inch tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelm Footprint:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash Hole Required:\u003c\/strong\u003e 3 inches (standard or tilt dash)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt Helm Option:\u003c\/strong\u003e Optional five-position tilt helm available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e Helm, cylinder, fittings, tubing, oil, fill kit, detailed instructions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e Meets A.B.Y.C. Standards; meets N.M.M.A. Certification requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957940162\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCylinder fits most splashwells and provides full engine movement\u003c\/li\u003e\n\u003cli\u003eCompatible with standard dash or optional tilt dash mounting (3 inch dash hole required)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the SeaStar HH4311-4 helm kit?\u003c\/strong\u003e The HH4311-4 ships as a complete kit containing the helm, the cylinder, fittings, tubing, oil, a fill kit, and detailed installation instructions, so no separate hydraulic components need to be purchased.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much dash space does the HH4311-4 helm need?\u003c\/strong\u003e This front mount helm has only a 5 inch footprint and needs just a 3 inch dash hole, whether the dash is a standard type or a tilt dash.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HH4311-4 support a tilt helm?\u003c\/strong\u003e Yes, an optional five-position tilt helm is available for use with the HH4311-4 system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering shaft does the HH4311-4 use?\u003c\/strong\u003e It uses a standard 3\/4 inch tapered steering shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HH4311-4 cylinder compatible with most splashwells?\u003c\/strong\u003e Yes, the balanced, compact-design cylinder included with the HH4311-4 fits most splashwells and still provides full engine movement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SeaStar HH4311-4 certified for marine use?\u003c\/strong\u003e The HH4311-4 helm system meets A.B.Y.C. Standards and N.M.M.A. Certification requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HH4311-4 helm kit weigh?\u003c\/strong\u003e The complete SeaStar BayStar HH4311-4 kit weighs 7.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HH4311-4 easy to install?\u003c\/strong\u003e Yes, it is designed for fast, easy installation and is packaged complete with all fittings, tubing, and instructions needed for the job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HH4311-4 a bare helm or a full steering kit?\u003c\/strong\u003e HH4311-4 is a full kit, not just a bare helm; it includes the front mount helm, compact cylinder, fittings, tubing, oil, and a fill kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the compact cylinder's design advantage?\u003c\/strong\u003e The cylinder included with the HH4311-4 is a balanced design with a compact size, which is what allows it to fit most splashwells while still delivering full engine movement.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348397275,"sku":"TEL-HH4311-4","price":553.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41x92VuuWOL.jpg?v=1784477026"},{"product_id":"seastar-baystar-1-4-hydraulic-outboard-steering-kit-hh4314-4-compact-balanced-cylinder-front-mount-helm-fits-most-splashwells","title":"SeaStar BayStar 1.4 Front Mount Hydraulic Helm Kit HH4314-4 with Compact Cylinder","description":"\u003cp\u003eThe SeaStar HH4314-4 is a complete BayStar 1.4 front mount hydraulic steering system built around a balanced cylinder with a compact design. The balanced cylinder construction fits most splashwells while still providing full engine movement, making it a practical choice for boats where transom space is tight. The compact helm has only a 5 inch footprint and needs only a 3 inch dash hole, so it installs cleanly into a standard or tilt dash cutout without major modification. An optional five position tilt helm is also available for this system.\u003c\/p\u003e\u003cp\u003eThis kit ships packaged complete: helm, cylinder, fittings, tubing, oil, a fill kit, and detailed instructions are all included, so installation is fast and straightforward without sourcing separate hydraulic components. The helm uses a standard 3\/4 inch tapered steering shaft. The kit consists of the BayStar 1.4 Front Mount Helm (HH4314-3) paired with the BayStar Compact Cylinder (HC4645H). The system meets A.B.Y.C. Standards and N.M.M.A. Certification requirements, confirming it is built to recognized marine safety and performance benchmarks.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HH4314-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e BayStar 1.4 Front Mount Helm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder Included:\u003c\/strong\u003e BayStar Compact Cylinder (HC4645H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelm Included:\u003c\/strong\u003e BayStar 1.4 Front Mount Helm (HH4314-3)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder Type:\u003c\/strong\u003e Balanced cylinder, compact design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelm Footprint:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash Hole Required:\u003c\/strong\u003e 3 inches (standard or tilt)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Shaft:\u003c\/strong\u003e 3\/4 inch tapered, standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt Option:\u003c\/strong\u003e Optional five position tilt helm available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Helm, cylinder, fittings, tubing, oil, fill kit, detailed instructions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e Meets A.B.Y.C. Standards; meets N.M.M.A. Certification requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.6 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned to fit most splashwell configurations while providing full engine movement; consult the kit instructions to confirm compatibility with your specific boat.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the SeaStar HH4314-4 helm kit?\u003c\/strong\u003e The HH4314-4 kit is packaged complete with the helm, cylinder, fittings, tubing, oil, a fill kit, and detailed instructions, so no separate hydraulic parts need to be purchased.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HH4314-4 include the cylinder or just the helm?\u003c\/strong\u003e Yes, this kit includes both components: the BayStar 1.4 Front Mount Helm (HH4314-3) and the BayStar Compact Cylinder (HC4645H), packaged together as one complete steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much dash space does the BayStar 1.4 helm need?\u003c\/strong\u003e The compact helm in the HH4314-4 kit has only a 5 inch footprint and requires just a 3 inch dash hole, whether the dash is standard or tilt style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a tilt helm available for this system?\u003c\/strong\u003e Yes, an optional five position tilt helm is available for the BayStar 1.4 system in addition to the standard front mount helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering shaft does the HH4314-4 use?\u003c\/strong\u003e This system uses a standard 3\/4 inch tapered steering shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of cylinder comes with the HH4314-4?\u003c\/strong\u003e The kit includes a balanced cylinder with a compact design, specifically the BayStar Compact Cylinder (HC4645H), which fits most splashwells while still providing full engine movement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cylinder fit my boat's splashwell?\u003c\/strong\u003e The BayStar Compact Cylinder included in the HH4314-4 kit is designed to fit most splashwells while providing full engine movement, though the kit instructions should be checked to confirm fit on a specific boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HH4314-4 helm kit weigh?\u003c\/strong\u003e The complete SeaStar HH4314-4 kit weighs 7.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HH4314-4 certified for marine use?\u003c\/strong\u003e Yes, the HH4314-4 steering kit meets A.B.Y.C. Standards and meets N.M.M.A. Certification requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HH4314-4 easy to install?\u003c\/strong\u003e The HH4314-4 is designed for fast, easy installation, arriving as a complete packaged kit with all fittings, tubing, oil, and detailed instructions included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is the HH4314-4 helm kit?\u003c\/strong\u003e The HH4314-4 is a SeaStar product, part of the BayStar 1.4 Front Mount Helm line.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348462811,"sku":"TEL-HH4314-4","price":553.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_b1188a9b-1444-40af-adc1-e61500d63e74.jpg?v=1785348990"},{"product_id":"dometic-seastar-hh5271-4-helm-1-7-fm-orb-front-mount-hydraulic-steering-helm-pump","title":"SeaStar Helm 1.7 FM ORB Hydraulic Steering Helm, HH5271-4","description":"\u003cp\u003eThe SeaStar Helm 1.7 (HH5271-4) is a low friction hydraulic steering helm built for sterndrive boats. It is the standard recommended helm for both non-power and power steered factory stock sterndrive applications, giving boaters a smooth, predictable steering feel at the wheel. The helm uses an FM ORB port fitting and is designed to work with 3\/8 inch diameter nylon tubing (Part No. HT5xxx) as part of a complete SeaStar 1.7 hydraulic steering system.\u003c\/p\u003e\u003cp\u003eBecause it relies on a low friction hydraulic design, the SeaStar Helm 1.7 reduces steering effort compared to mechanical cable systems, while remaining compatible with both non-power assisted and power assisted setups. Boaters running factory stock sterndrive configurations who want faster steering response in a power steered application can instead consider a SeaStar 2.4 helm, but for standard non-power and power steered installations the 1.7 is the baseline recommendation. Note that modified installations may require a higher capacity steering system, so confirm your setup matches factory stock specifications before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HH5271-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Helm Pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering System:\u003c\/strong\u003e SeaStar 1.7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Fitting:\u003c\/strong\u003e FM ORB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Tubing:\u003c\/strong\u003e 3\/8 inch diameter nylon tubing, Part No. HT5xxx\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 11.2 x 5.3 x 5.9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions (L x W x H):\u003c\/strong\u003e 11.26 x 5.67 x 5.35 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.61 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7315091535816\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar Helm 1.7 (HH5271-4) used for?\u003c\/strong\u003e The HH5271-4 is a low friction hydraulic steering helm used in factory stock sterndrive boat steering systems, serving as the wheel-side component that drives the hydraulic steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SeaStar Helm 1.7 work with power steering?\u003c\/strong\u003e Yes, the SeaStar 1.7 helm is the standard recommendation for both non-power and power steered sterndrive applications, so the HH5271-4 works in either configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat port fitting does the HH5271-4 helm use?\u003c\/strong\u003e The SeaStar Helm 1.7, part number HH5271-4, uses an FM ORB port fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tubing is required for the SeaStar Helm 1.7?\u003c\/strong\u003e SeaStar 1.7 systems, including the HH5271-4 helm, use 3\/8 inch diameter nylon tubing, listed under Part No. HT5xxx.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar Helm 1.7 helm weigh?\u003c\/strong\u003e The HH5271-4 SeaStar Helm 1.7 weighs 7.61 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the HH5271-4 helm?\u003c\/strong\u003e The SeaStar Helm 1.7 (HH5271-4) measures 11.2 x 5.3 x 5.9 inches, with a package size of 11.26 x 5.67 x 5.35 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the SeaStar 1.7 and SeaStar 2.4 helm?\u003c\/strong\u003e The SeaStar 1.7, such as the HH5271-4, is the standard recommendation for non-power and power steered applications, while a SeaStar 2.4 helm can be specified for power steered applications where faster steering response is desired.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SeaStar Helm 1.7 suitable for modified sterndrive installations?\u003c\/strong\u003e The HH5271-4 SeaStar Helm 1.7 recommendation applies to factory stock sterndrives only; modified installations may require a higher capacity steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the HH5271-4 steering helm?\u003c\/strong\u003e The HH5271-4 is a SeaStar Helm 1.7, part of the SeaStar hydraulic steering line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is the HH5271-4?\u003c\/strong\u003e The HH5271-4 SeaStar Helm 1.7 is categorized as a helm pump within a hydraulic boat steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar Helm 1.7?\u003c\/strong\u003e The UPC for the HH5271-4 SeaStar Helm 1.7 is 7315091535816.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348561115,"sku":"TEL-HH5271-4","price":757.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71otWhIGPwL.jpg?v=1784477044"},{"product_id":"seastar-hh5263-4-rear-mount-hydraulic-steering-helm-pump-for-marine-boats","title":"SeaStar HH5263-4 Rear Mount Hydraulic Steering Helm Pump","description":"\u003cp\u003eThe SeaStar HH5263-4 is a rear mount hydraulic steering helm pump for boats using a SeaStar hydraulic steering system. As the helm unit, it is the component mounted behind the dash that the steering wheel turns to send hydraulic pressure through the system's tubing to the outboard or sterndrive cylinder, converting wheel input into steering motion at the drive. The rear mount configuration positions the helm body behind the panel rather than through a front-facing bezel, which suits helm layouts where rear access and mounting space are available.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HH5263-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Helm Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Rear Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.71 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7315091535885\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of steering component is the SeaStar HH5263-4?\u003c\/strong\u003e It is a hydraulic steering helm pump, the unit mounted behind the dash that a boat's steering wheel turns to send hydraulic pressure to the steering cylinder at the drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HH5263-4 a front mount or rear mount helm?\u003c\/strong\u003e The HH5263-4 is a rear mount helm pump, meaning it mounts behind the dash panel rather than through a front-facing bezel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar HH5263-4 helm pump weigh?\u003c\/strong\u003e This helm pump weighs 8.71 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HH5263-4 a genuine SeaStar part number?\u003c\/strong\u003e Yes, HH5263-4 is the SeaStar manufacturer part number for this rear mount helm pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is the HH5263-4 helm pump?\u003c\/strong\u003e It is manufactured by SeaStar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar HH5263-4?\u003c\/strong\u003e The UPC for this SeaStar helm pump is 7315091535885.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product category does the HH5263-4 fall under?\u003c\/strong\u003e The HH5263-4 is categorized as a helm pump within SeaStar's hydraulic steering line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HH5263-4 come with hydraulic tubing or fluid?\u003c\/strong\u003e Specific included accessories such as tubing or hydraulic fluid are not specified for the HH5263-4 helm pump; confirm with your installer what additional components your system requires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a rear mount helm pump do compared to the steering wheel itself?\u003c\/strong\u003e The rear mount HH5263-4 helm pump is the hydraulic pump behind the wheel that converts the wheel's turning into hydraulic pressure sent to the steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HH5263-4 sold as a standalone helm pump?\u003c\/strong\u003e Yes, the HH5263-4 is the rear mount SeaStar helm pump unit itself, identified by its own manufacturer part number.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348593883,"sku":"TEL-HH5263-4","price":771.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_b297aad1-f66b-4ddc-8baf-76341bef4443.jpg?v=1785348990"},{"product_id":"seastar-helm-20-hydraulic-steering-helm-pump-hh5273-4-for-marine-boat-steering-systems","title":"SeaStar Helm 20 Hydraulic Steering Helm Pump - HH5273-4","description":"\u003cp\u003eThe SeaStar Helm 20 is a hydraulic steering helm pump, part number HH5273-4, from SeaStar's Helm Pumps line. As the helm component of a hydraulic steering system, it mounts behind the steering wheel and converts wheel rotation into hydraulic pressure that is directed through the system's hoses to the steering cylinder, moving the boat's outboard or sterndrive in response to wheel input. It serves as the operator-side unit in a SeaStar hydraulic steering setup, working alongside the system's helm pump, hoses, and steering cylinder to deliver steering control at the helm station.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HH5273-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Helm 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Helm Pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7315091535830\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HH5273-4?\u003c\/strong\u003e The HH5273-4 is a genuine SeaStar Helm 20 hydraulic steering helm pump, the wheel-side unit of a SeaStar hydraulic steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar Helm 20 helm pump weigh?\u003c\/strong\u003e The SeaStar Helm 20, part number HH5273-4, weighs 7.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HH5273-4 a genuine SeaStar part?\u003c\/strong\u003e Yes, HH5273-4 is a genuine SeaStar Helm 20 product, not an aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product category does HH5273-4 fall under?\u003c\/strong\u003e HH5273-4 is listed under SeaStar's Helm Pumps category as part of the Helm 20 product line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a hydraulic steering helm pump like the SeaStar Helm 20 do?\u003c\/strong\u003e It mounts at the helm station and converts steering wheel rotation into hydraulic pressure that is routed to the steering cylinder to turn the outboard or sterndrive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar Helm 20 HH5273-4?\u003c\/strong\u003e The UPC for the SeaStar Helm 20, part number HH5273-4, is 7315091535830.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SeaStar Helm 20 work as a standalone steering solution?\u003c\/strong\u003e No, the HH5273-4 helm pump is one component of a complete SeaStar hydraulic steering system, which also requires hoses and a steering cylinder matched to the boat's setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does the SeaStar Helm 20 mount on a boat?\u003c\/strong\u003e The HH5273-4 helm pump mounts behind the steering wheel at the helm station, where it is connected to the rest of the hydraulic steering system.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348659419,"sku":"TEL-HH5273-4","price":937.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_83023746-4621-492c-a505-e3ecbc641686.jpg?v=1785348998"},{"product_id":"seastar-hh5272-4-seastar-2-4-front-mount-helm-with-orb-fittings-for-hydraulic-outboard-steering","title":"SeaStar HH5272-4 Front Mount 2.4 Hydraulic Steering Helm with ORB Fittings","description":"\u003cp\u003eThe SeaStar HH5272-4 is a front-mount 2.4 hydraulic steering helm designed for single-cylinder outboard steering systems. As a 2.4 helm, it is built for applications where faster steering response is wanted compared to a standard 1.7 helm, and it is commonly specified for power-steered setups where quicker response at the wheel matters. The front-of-dash fill design allows for convenient servicing without pulling the helm, and the compact housing needs only a 3 inch dash hole, making it possible to retrofit into an older SeaStar 4.5 inch hole cutout without cutting a new opening in the dash.\u003c\/p\u003e\u003cp\u003eHose connections use positionable stainless steel O-ring boss (ORB) fittings, which let the installer rotate the fitting to the routing angle that works best for the boat's hose runs before final tightening, simplifying installation in tight helm stations. In typical single-cylinder outboard applications, the helm turns 3.5 times lock-to-lock. The compact footprint keeps the helm unobtrusive behind the dash while still housing the full hydraulic pump mechanism needed to drive the steering cylinder.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HH5272-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Front Mount Hydraulic Steering Helm, 2.4 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Positionable stainless steel ORB (O-ring boss) fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurns Lock-to-Lock:\u003c\/strong\u003e 3.5 turns in most typical single cylinder outboard applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash Hole Required:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetrofit Compatibility:\u003c\/strong\u003e Fits an existing SeaStar 4.5 inch hole cutout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootprint:\u003c\/strong\u003e 4-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 11 x 5.75 x 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Uses:\u003c\/strong\u003e Sailing, Motorboating, Jet Ski\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7315091535823\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for single-cylinder outboard steering systems using a SeaStar hydraulic steering setup; verify cylinder and helm compatibility with your existing SeaStar system before ordering.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HH5272-4?\u003c\/strong\u003e It is a front mount SeaStar 2.4 hydraulic steering helm, part number HH5272-4, built for single-cylinder outboard steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does the HH5272-4 have?\u003c\/strong\u003e In most typical single cylinder outboard applications, the HH5272-4 turns 3.5 times lock-to-lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size dash hole does this helm need?\u003c\/strong\u003e The HH5272-4 needs only a 3 inch dash hole and can be retrofitted into an existing SeaStar 4.5 inch hole cutout, so a larger dash opening does not need to be re-cut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of hose fittings does the HH5272-4 use?\u003c\/strong\u003e It uses positionable stainless steel ORB (O-ring boss) fittings, which can be rotated to the desired routing angle before the hoses are tightened down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a 1.7 or 2.4 SeaStar helm?\u003c\/strong\u003e The HH5272-4 is a SeaStar 2.4 helm, which is specified over the standard 1.7 helm when faster steering response is wanted, including in power steered applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HH5272-4 weigh?\u003c\/strong\u003e The SeaStar HH5272-4 weighs 7.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the helm?\u003c\/strong\u003e The HH5272-4 measures 11 x 5.75 x 5.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HH5272-4 be used on a jet ski or sailboat?\u003c\/strong\u003e Yes, this SeaStar 2.4 helm is suited to sailing, motorboating, and jet ski applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HH5272-4 work with a power steering system?\u003c\/strong\u003e SeaStar 2.4 helms like the HH5272-4 can be specified for power steered applications where faster steering response is desired.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HH5272-4 a front mount or side mount helm?\u003c\/strong\u003e It is a front mount helm, with fill access at the front of the dash for easier servicing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the compact footprint of the HH5272-4 measure?\u003c\/strong\u003e The helm has a compact 4-7\/16 inch footprint, keeping it unobtrusive behind the dash.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the HH5272-4 different from a SeaStar 1.7 helm?\u003c\/strong\u003e The HH5272-4 is a 2.4 series helm intended for faster steering response than a 1.7 helm, which is the standard recommendation for both non-power and power steered applications with more moderate response needs.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348724955,"sku":"TEL-HH5272-4","price":1032.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61wZtKFHLAL.jpg?v=1784477077"},{"product_id":"seastar-pro-helm-pump-hh5779-4-for-hydraulic-outboard-steering-high-speed-balanced-cylinder-systems","title":"SeaStar Pro Helm 17 Hydraulic Steering Helm, Part Number HH5779-4","description":"\u003cp\u003eThe SeaStar Pro Helm 17 (part number HH5779-4) is a hydraulic steering helm pump built for boats running a SeaStar hydraulic steering system. As part of SeaStar's PRO helm line, it is designed to work with SeaStar Power Assist PRO systems rather than the standard Power Assist system used with non-PRO helms, so make sure any power assist unit paired with this helm is the PRO version. The helm is the pump station at the wheel that generates the hydraulic pressure sent through the steering lines to the cylinder at the outboard or sterndrive, giving the operator direct, responsive control at the helm station.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HH5779-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Pro Helm 17\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Helm Pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.58 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7315091535922\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HH5779-4?\u003c\/strong\u003e HH5779-4 is the manufacturer part number for the SeaStar Pro Helm 17, a hydraulic steering helm pump used as the wheel-side component of a SeaStar hydraulic steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this helm work with a standard Power Assist unit?\u003c\/strong\u003e No. The SeaStar Pro Helm 17 (HH5779-4) is part of the PRO helm line, and SeaStar specifies that PRO helms should be paired with SeaStar Power Assist PRO systems rather than the standard Power Assist system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HH5779-4 helm weigh?\u003c\/strong\u003e The SeaStar Pro Helm 17 weighs 7.58 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is the SeaStar Pro Helm 17?\u003c\/strong\u003e It is listed under Helm Pumps, meaning it is the steering pump mounted at the helm station rather than the cylinder mounted at the engine or drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HH5779-4 a genuine SeaStar part?\u003c\/strong\u003e Yes, HH5779-4 is the manufacturer part number assigned by SeaStar to the Pro Helm 17.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar Pro Helm 17?\u003c\/strong\u003e The UPC associated with the SeaStar Pro Helm 17 (HH5779-4) is 7315091535922.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Pro Helm 17 be used on a dual engine boat?\u003c\/strong\u003e The SeaStar Pro Helm 17 is a helm pump used at the wheel; for dual engine setups SeaStar's hydraulic steering system also requires an appropriate tie bar or hydraulic tie bar arrangement between the two cylinders, which is a separate component from the helm itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat distinguishes the 'Pro' designation on this helm?\u003c\/strong\u003e The 'Pro' in SeaStar Pro Helm 17 (HH5779-4) indicates it belongs to SeaStar's PRO helm line, which is matched with SeaStar's PRO-specific Power Assist systems rather than the standard Power Assist line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HH5779-4 the pump or the steering cylinder?\u003c\/strong\u003e HH5779-4 is the helm pump, the unit mounted behind the wheel; it is not the hydraulic steering cylinder mounted at the engine or drive.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348823259,"sku":"TEL-HH5779-4","price":690.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_4309252d-3008-40ea-86f9-b4812d4c9ff0.jpg?v=1785348998"},{"product_id":"seastar-hh6543-4-helm-2-0-classic-tilt-orb-no-feedback-rotary-steering-for-single-outboard-boats","title":"SeaStar HH6543-4 Helm 2.0 Classic Tilt Hydraulic Steering Helm, ORB Ports, All-Metal Construction","description":"\u003cp\u003eThe SeaStar HH6543-4 Helm 2.0 Classic Tilt is a hydraulic steering helm built for smooth, super-efficient control at the wheel. It is constructed of 100% metal for durable, long-term performance on the water, and its Classic Tilt design fits standard tilt steering columns for a comfortable, adjustable helm position. The helm uses ORB (O-ring boss) porting for the hydraulic hose connections, providing a secure, leak-resistant seal at the fitting points.\u003c\/p\u003e\u003cp\u003eAs the core control unit of a hydraulic steering system, the Helm 2.0 Classic Tilt translates wheel input into steering ram movement, giving the operator direct, responsive command of the vessel. It is designed as a standalone helm unit within a broader hydraulic steering setup rather than a full kit, so it is intended to be installed alongside compatible SeaStar hydraulic steering components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HH6543-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Steering Helm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt Style:\u003c\/strong\u003e Classic Tilt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Type:\u003c\/strong\u003e ORB (O-ring boss)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal (100% metal construction)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e One\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 16.6 x 5.5 x 7.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12.63 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7315091536073\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HH6543-4?\u003c\/strong\u003e HH6543-4 is a SeaStar Helm 2.0 Classic Tilt hydraulic steering helm, the wheel-side unit of a hydraulic steering system that uses ORB (O-ring boss) hose ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Classic Tilt designation mean?\u003c\/strong\u003e Classic Tilt describes the tilt steering column style this helm is built for, distinguishing it from other SeaStar helm tilt configurations such as Sport Tilt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are ORB ports on this steering helm?\u003c\/strong\u003e ORB stands for O-ring boss, a fitting style used on the HH6543-4 helm's hydraulic hose connections that seals with an O-ring rather than tapered pipe threads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the HH6543-4 helm made from?\u003c\/strong\u003e The SeaStar HH6543-4 helm is made of 100% metal construction for durability in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the HH6543-4 helm?\u003c\/strong\u003e The SeaStar Helm 2.0 Classic Tilt (HH6543-4) measures 16.6 x 5.5 x 7.6 inches (L x W x H).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HH6543-4 helm weigh?\u003c\/strong\u003e This SeaStar helm weighs 12.63 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HH6543-4 come as a complete steering kit?\u003c\/strong\u003e No, HH6543-4 is the helm unit itself; it is installed as part of a broader hydraulic steering system with compatible SeaStar hoses and a steering ram.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HH6543-4 a genuine SeaStar part?\u003c\/strong\u003e Yes, HH6543-4 is the SeaStar manufacturer part number for this Helm 2.0 Classic Tilt unit, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options are available for the HH6543-4?\u003c\/strong\u003e The SeaStar HH6543-4 Helm 2.0 Classic Tilt is offered in a single color option, listed as One.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the HH6543-4 different from a Sport Tilt helm?\u003c\/strong\u003e The HH6543-4 uses the Classic Tilt column style, whereas SeaStar's Sport Tilt helms are built for a different tilt column configuration; the two are not interchangeable.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348856027,"sku":"TEL-HH6543-4","price":989.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51VflOF0BsL.jpg?v=1784477086"},{"product_id":"seastar-1-7-sport-tilt-helm-hh6191-4-remote-fill-hydraulic-outboard-steering-single-multi-engines-up-to-350-hp","title":"SeaStar Sport Tilt Helm 1.7, Remote Fill, HH6191-4, Fits Single and Multi-Outboard Up to 350 HP","description":"\u003cp\u003eThe SeaStar HH6191-4 is a 1.7 cubic inch Sport Tilt hydraulic helm built for no-feedback steering on single and multi-outboard boats up to 350 HP, or up to 700 HP combined on counter-rotating twin outboard setups, at speeds up to 60 mph. This helm uses a remote fill design, so the hydraulic fluid reservoir is filled at a remote point rather than through the front of the dash, giving installers flexibility on tight consoles. The tilt mechanism offers 48 degrees of tilt articulation across 5 positive lock positions, so the helm can be angled to the driver's preferred position and locked securely in place. Factory-installed lubrication is applied at the factory to help ensure smooth, consistent steering feel from first install. Typical single-cylinder outboard applications turn 4.2 times lock-to-lock. The HH6191-4 is manufactured to meet A.B.Y.C. Standards and N.M.M.A. Certification requirements, and is designed and manufactured in Canada. It is suited to cruisers, runabouts, center console boats, offshore fishing boats, and similar outboard-powered boats. SeaStar hydraulic helms are tested and certified for use with SeaStar hydraulic fluid and SeaStar hydraulic hoses; use of non-certified fluid or hoses may void the warranty and could cause loss of steering control. The helm is backed by a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HH6191-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Hydraulic Tilt Helm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFill Location:\u003c\/strong\u003e Remote fill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt Articulation:\u003c\/strong\u003e 48 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock Positions:\u003c\/strong\u003e 5 positive lock positions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurns Lock-to-Lock:\u003c\/strong\u003e 4.2 turns (typical single-cylinder outboard applications)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower Rating:\u003c\/strong\u003e Up to 350 HP single outboard, up to 700 HP combined for counter-rotating twin outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Speed:\u003c\/strong\u003e 60 mph\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e A.B.Y.C. Standards, N.M.M.A. Certification requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Blend\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7315091535953\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user warranty against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSingle and multi-outboard engine applications up to 350 HP (up to 700 HP combined for counter-rotating twin outboards)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HH6191-4?\u003c\/strong\u003e The HH6191-4 is a 1.7 cubic inch SeaStar Sport Tilt hydraulic helm with a remote fill design, built for no-feedback steering on single and multi-outboard boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much horsepower can this helm handle?\u003c\/strong\u003e Up to 350 HP on a single outboard, or up to 700 HP combined when used with counter-rotating twin outboards, at speeds up to 60 mph.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does the HH6191-4 have?\u003c\/strong\u003e In typical single-cylinder outboard applications, this helm turns 4.2 times from lock to lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the hydraulic fluid reservoir filled on the HH6191-4?\u003c\/strong\u003e This is a remote fill helm, meaning the fluid reservoir is filled at a remote point rather than through the front of the dash.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HH6191-4 the same as the HH6191-3?\u003c\/strong\u003e No, the HH6191-4 is the remote fill version of the 1.7 Sport Tilt helm, while the HH6191-3 is a front-of-dash fill version; they are different part numbers, so it is important to order the correct one for your fill configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HH6191-4 tilt?\u003c\/strong\u003e The helm offers 48 degrees of tilt articulation with 5 positive lock positions to hold the desired angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this helm certified for marine use?\u003c\/strong\u003e Yes, the HH6191-4 is designed to meet A.B.Y.C. Standards and N.M.M.A. Certification requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HH6191-4 weigh?\u003c\/strong\u003e The SeaStar HH6191-4 Sport Tilt Helm weighs 14.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fluid and hoses should be used with the HH6191-4?\u003c\/strong\u003e SeaStar hydraulic helms, including the HH6191-4, are tested and certified using SeaStar hydraulic fluid and SeaStar hydraulic hoses; using non-certified fluid or hoses may void the warranty and could cause loss of steering control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the HH6191-4 suitable for?\u003c\/strong\u003e This helm is suited to cruisers, runabouts, center console boats, offshore fishing boats, and similar single or multi-outboard powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HH6191-4 come pre-lubricated?\u003c\/strong\u003e Yes, factory-installed lubrication is applied to the HH6191-4 to help ensure smooth steering feel from installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the HH6191-4?\u003c\/strong\u003e The HH6191-4 is backed by a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348921563,"sku":"TEL-HH6191-4","price":1281.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/TEL-HH6191-4__28862.1763741652.500.750.png?v=1785188934"},{"product_id":"seastar-hk6400ts-4-1-7-sport-tilt-hydraulic-outboard-steering-kit-helm-cylinder-no-hoses","title":"SeaStar 1.7 Sport Tilt Hydraulic Steering Kit HK6400TS-4 for Outboard Engines up to 350 HP","description":"\u003cp\u003eThe SeaStar HK6400TS-4 is a complete 1.7 Sport Tilt hydraulic steering kit built for outboard-powered boats, giving single or dual non-power-assisted outboard engines smooth, precise steering feel. The kit centers on a 1.7 cubic inch displacement helm that delivers 5 turns lock-to-lock for confident, responsive control at the wheel, paired with a pivot mount outboard steering cylinder (HC5345-3\/58-3) finished in black. The cylinder features positionable stainless steel O-ring (ORB) fittings that simplify hydraulic hose routing and provide a sealing system designed to resist saltwater intrusion and compression set over time. Tilt articulation reaches 48 degrees across 5 positive lock positions, with factory-installed lubrication for consistent operation. Two quarts of SeaStar HA5430 hydraulic steering fluid are included to fill the system; hydraulic hoses are sold separately (SeaStar HO51xx hose kit, ordered by length) so the run can be sized to the boat. Construction uses stainless steel and rubber components, including a soft rubber boot at the cylinder. The system is built and certified to American Boat \u0026amp; Yacht Council (ABYC) and International Standards Organization (ISO) requirements and is suitable for cruisers, runabouts, center console boats, and offshore fishing boats. It supports single and dual outboard installations up to 350 HP (700 combined HP for counter-rotating dual engines) with boats capable of speeds up to 60 MPH, on engines equipped with an ABYC Standard Engine Tilt Tube.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HK6400TS-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e SeaStar 1.7 Tilt Steering Kit (Sport)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Type:\u003c\/strong\u003e Hydraulic Outboard Steering Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelm Displacement:\u003c\/strong\u003e 1.7 cubic inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Turns Lock-to-Lock:\u003c\/strong\u003e 5 turns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelm Grip Size:\u003c\/strong\u003e 7-8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder Mount Type:\u003c\/strong\u003e Pivot mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder Part Number:\u003c\/strong\u003e HC5345-3\/58-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt Articulation:\u003c\/strong\u003e 48 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt Lock Positions:\u003c\/strong\u003e 5 positive lock positions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Engine Horsepower:\u003c\/strong\u003e 350 HP single or dual engine; 700 HP combined for counter-rotating dual engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Boat Speed:\u003c\/strong\u003e 60 MPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Fluid Included:\u003c\/strong\u003e 2 quarts SeaStar HA5430 hydraulic steering fluid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Hoses:\u003c\/strong\u003e Sold separately (SeaStar HO51xx hose kit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel, rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e ABYC and ISO certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 29 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282390419\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle or dual non-power-assisted outboard engines up to 350 HP (700 combined HP for counter-rotating dual engines)\u003c\/li\u003e\n\u003cli\u003eRequires an ABYC Standard Engine Tilt Tube\u003c\/li\u003e\n\u003cli\u003eSuitable for boats with speeds up to 60 MPH\u003c\/li\u003e\n\u003cli\u003eSupports dual station use with purchase of an additional helm, hose, and fittings (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SeaStar HK6400TS-4 Sport Tilt Steering Kit include?\u003c\/strong\u003e The HK6400TS-4 kit includes a 1.7 cubic inch displacement front mount helm, a pivot mount outboard steering cylinder (HC5345-3\/58-3) in black, and 2 quarts of SeaStar HA5430 hydraulic steering fluid. Hydraulic hoses are sold separately as a SeaStar HO51xx hose kit sized to the installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does this steering kit have?\u003c\/strong\u003e The helm in the HK6400TS-4 kit provides 5 turns lock-to-lock, which is a standard feel for recreational outboard steering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower this steering kit can handle?\u003c\/strong\u003e This kit is rated for single or dual non-power-assisted outboard engines up to 350 HP, or up to 700 combined HP when used on counter-rotating dual engine setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HK6400TS-4 come with hydraulic hoses?\u003c\/strong\u003e No, hydraulic hoses are not included with the HK6400TS-4. They are ordered separately as a SeaStar HO51xx hose kit, chosen by the length needed for the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HK6400TS-4 steering kit weigh?\u003c\/strong\u003e The complete SeaStar HK6400TS-4 Sport Tilt Steering Kit weighs 29 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials is this steering kit made from?\u003c\/strong\u003e The HK6400TS-4 uses stainless steel and rubber construction, including stainless steel O-ring (ORB) fittings on the cylinder and a soft rubber boot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much tilt articulation does the steering cylinder allow?\u003c\/strong\u003e The pivot mount cylinder included with the HK6400TS-4 allows 48 degrees of tilt articulation with 5 positive lock positions for the outboard engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this steering kit certified for marine use?\u003c\/strong\u003e Yes, the HK6400TS-4 is built and certified to meet American Boat \u0026amp; Yacht Council (ABYC) and International Standards Organization (ISO) requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Sport and Classic versions of this steering kit?\u003c\/strong\u003e The Sport version (HK6400TS-4) and the Classic version (HK6400TC-3) share the same outboard steering cylinder, hose kit, and hydraulic fluid, but use different helm styles suited to different helm aesthetics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used for a dual-engine or dual-station setup?\u003c\/strong\u003e The HK6400TS-4 supports dual, non-power-assisted outboard engines up to 700 combined HP for counter-rotating setups, and can be configured for dual station steering with an additional helm, hose, and fittings purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size grip does the helm on this kit have?\u003c\/strong\u003e The helm included in the HK6400TS-4 Sport Tilt Steering Kit has a grip size of 7-8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of hydraulic fluid should be used with the HK6400TS-4?\u003c\/strong\u003e The HK6400TS-4 is filled with SeaStar HA5430 hydraulic steering fluid, with 2 quarts included in the kit; using non-SeaStar hydraulic fluid or hoses may affect performance and warranty coverage.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349380315,"sku":"TEL-HK6400TS-4","price":2154.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/HK6400TS-3__43341.1752841876.500.750.jpg?v=1785188567"},{"product_id":"seastar-hp6032-helm-service-kit-for-baystar-plus-hydraulic-steering-fits-hh4514-3-hh4513-3-hh4314-3-helms-up-to-150-hp","title":"SeaStar HP6032 Service Kit for BayStar Plus Hydraulic Steering Helms HH4514-3, HH4513-3, HH4314-3","description":"\u003cp\u003eThe SeaStar HP6032 is a service kit built for BayStar Plus hydraulic steering helms, the helm line built by the makers of SeaStar hydraulic steering for boats rated to a maximum of 150 HP. BayStar Plus combines rigid ISO quality control with precision manufacturing to bring reliable, comfortable hydraulic steering feel to smaller outboard and sterndrive boats, and the HP6032 kit lets an owner service the helm rather than replace it outright. It is designed specifically for the BayStar Plus 1.4 Front Mount helm (HH4514-3) and the BayStar Plus 1.4 Sport Tilt helms (HH4513-3 and HH4314-3), so it is matched to the internal components used in those specific helm models rather than being a generic, one-size-fits-all kit. Because it is sized for the 1.4 cubic-inch BayStar Plus helm family, it restores factory sealing and performance to helms that have seen wear from normal use. At 0.4 pounds, the kit ships light and is intended for a straightforward helm service without the cost of a full helm replacement. Confirm your helm model number against HH4514-3, HH4513-3, or HH4314-3 before ordering to ensure correct fitment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HP6032\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Helm service kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Helm Models:\u003c\/strong\u003e HH4514-3, HH4513-3, HH4314-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Steering System:\u003c\/strong\u003e BayStar Plus 1.4 hydraulic steering (Front Mount and Sport Tilt)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Horsepower Rating:\u003c\/strong\u003e 150 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957898906\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Steering Parts and Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBayStar Plus 1.4 Front Mount helm, model HH4514-3\u003c\/li\u003e\n\u003cli\u003eBayStar Plus 1.4 Sport Tilt helm, model HH4513-3\u003c\/li\u003e\n\u003cli\u003eBayStar Plus 1.4 Sport Tilt helm, model HH4314-3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HP6032 kit used for?\u003c\/strong\u003e HP6032 is a service kit for BayStar Plus hydraulic steering helms, used to service the helm rather than replace it entirely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich helm models does HP6032 fit?\u003c\/strong\u003e It is matched to the BayStar Plus 1.4 Front Mount helm (HH4514-3) and the BayStar Plus 1.4 Sport Tilt helms (HH4513-3 and HH4314-3).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit compatible with the BayStar Plus Sport Tilt helm?\u003c\/strong\u003e Yes, HP6032 is compatible with both Sport Tilt helm models HH4513-3 and HH4314-3, as well as the Front Mount helm HH4514-3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat horsepower rating is the BayStar Plus system designed for?\u003c\/strong\u003e BayStar Plus hydraulic steering, which the HP6032 service kit supports, is rated for boats up to a maximum of 150 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HP6032 service kit weigh?\u003c\/strong\u003e The SeaStar HP6032 kit weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes the HP6032 service kit?\u003c\/strong\u003e HP6032 is a SeaStar part number, and BayStar Plus steering is brought to buyers by the same manufacturer that produces SeaStar hydraulic steering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to know my helm model number before ordering HP6032?\u003c\/strong\u003e Yes, confirm your helm is HH4514-3, HH4513-3, or HH4314-3 before ordering the HP6032 kit to ensure correct fitment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan HP6032 be used on any hydraulic steering helm?\u003c\/strong\u003e No, HP6032 is specifically designed for the BayStar Plus 1.4 Front Mount and Sport Tilt helm models, not for hydraulic helms generally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HP6032 kit include tilt steering parts?\u003c\/strong\u003e It applies to the Sport Tilt helm models HH4513-3 and HH4314-3 as well as the Front Mount helm HH4514-3, covering both tilt and non-tilt BayStar Plus 1.4 configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with the HP6032 kit?\u003c\/strong\u003e The SeaStar HP6032 service kit is listed under UPC 731957898906.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350428891,"sku":"TEL-HP6032","price":14.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/HP6032__59325.1722489522.500.750.jpg?v=1785329140"},{"product_id":"seastar-hp6046-bellows-tilt-helm-cover-6-pack-for-baystar-sport-tilt-hydraulic-steering-helms","title":"SeaStar HP6046 Bellows Tilt Helm Cover, 6-Pack, for Sport Tilt Helms","description":"\u003cp\u003eThe SeaStar HP6046 is a bellows-style tilt helm cover sold as a set of 6, designed to fit new Sport Tilt helm units. The bellows cover protects the tilt mechanism of the helm from dirt, moisture, and UV exposure while allowing the helm to move freely through its tilt range. This is a replacement\/service part intended for boat owners and marine technicians maintaining Sport Tilt helm pumps as part of a hydraulic steering system. Each pack contains 6 covers, and the total weight of the pack is 1.34 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HP6046\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Helm Pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 6 covers per pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.34 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957898685\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e New Sport Tilt helms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNew Sport Tilt helm units\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HP6046?\u003c\/strong\u003e It is a bellows-style tilt helm cover sold as a set of 6, made to fit new Sport Tilt helm units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many covers come in one HP6046 pack?\u003c\/strong\u003e Each HP6046 pack includes 6 bellows tilt helm covers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the bellows cover do?\u003c\/strong\u003e It covers and protects the tilt portion of the Sport Tilt helm from dirt, moisture, and sun exposure while still allowing normal tilt movement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the HP6046 fit any tilt helm?\u003c\/strong\u003e The HP6046 is designed for new Sport Tilt helm units; it is not a universal cover for all helm styles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HP6046 pack weigh?\u003c\/strong\u003e The 6-pack of SeaStar HP6046 bellows covers weighs 1.34 pounds total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HP6046 sold individually or as a set?\u003c\/strong\u003e The HP6046 is sold as a set of 6 covers, not individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is the HP6046?\u003c\/strong\u003e The SeaStar HP6046 is listed under Helm Pumps, as it is a component used with helm pump\/tilt assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HP6046 a genuine SeaStar part?\u003c\/strong\u003e Yes, HP6046 is the SeaStar manufacturer part number for this bellows tilt helm cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the HP6046 pack?\u003c\/strong\u003e The UPC for the SeaStar HP6046 6-pack is 731957898685.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace all covers in the pack at once?\u003c\/strong\u003e The HP6046 is packaged as a set of 6, so replacement is typically done using covers from the same pack as needed for your Sport Tilt helm.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350494427,"sku":"TEL-HP6046","price":105.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/tel-hp6046__15850.1665084399.500.750.jpg?v=1785329140"},{"product_id":"seastar-hs5182-hydraulic-steering-cylinder-seal-kit-150-7-ba-std-tr-tm","title":"SeaStar Seal Kit HS5182 for Hydraulic Steering Cylinders (150-7 BA, Std, TR, TM)","description":"\u003cp\u003eThe SeaStar HS5182 is a seal kit for SeaStar hydraulic steering cylinders, covering the 150-7 BA, Std, TR, and TM cylinder types. It is designed to restore a worn or leaking steering cylinder to proper working condition, replacing the internal sealing components that keep hydraulic fluid contained and steering pressure consistent as the helm is turned. The kit is round in shape and is supplied as a genuine SeaStar part backed by a limited warranty.\u003c\/p\u003e\u003cp\u003eThis seal kit falls under SeaStar's line of hydraulic steering cylinder service parts, used to maintain smooth, leak-free operation of the steering system without replacing the entire cylinder assembly. At 0.12 pounds, it is a compact service kit sized for the seal components it contains.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HS5182\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Hydraulic Steering Cylinders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Seal Kit 150-7 BA, Std, TR, TM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.12 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957806390\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00731957806390\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HS5182 seal kit used for?\u003c\/strong\u003e It is a seal kit for SeaStar hydraulic steering cylinders, covering the 150-7 BA, Std, TR, and TM cylinder types, used to replace worn internal seals so the cylinder holds hydraulic pressure properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HS5182 seal kit weigh?\u003c\/strong\u003e The SeaStar HS5182 seal kit weighs 0.12 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HS5182 a genuine SeaStar part?\u003c\/strong\u003e Yes, the HS5182 is a genuine SeaStar part number and is backed by a limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape is the HS5182 seal kit?\u003c\/strong\u003e The HS5182 seal kit is round in shape.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SeaStar HS5182 kit?\u003c\/strong\u003e The kit is listed as Seal Kit 150-7 BA, Std, TR, TM, covering the sealing components for those SeaStar hydraulic steering cylinder variants.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar HS5182?\u003c\/strong\u003e The UPC for SeaStar part HS5182 is 731957806390.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich SeaStar cylinder types does HS5182 fit?\u003c\/strong\u003e HS5182 is designated for the 150-7 BA, Std, TR, and TM SeaStar hydraulic steering cylinder types.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HS5182 seal kit come with a warranty?\u003c\/strong\u003e Yes, SeaStar covers the HS5182 seal kit with a limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HS5182 a complete cylinder or just a seal kit?\u003c\/strong\u003e HS5182 is a seal kit only, intended to service and reseal an existing SeaStar hydraulic steering cylinder rather than replace the whole unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does the HS5182 seal kit belong to?\u003c\/strong\u003e The HS5182 is categorized under SeaStar hydraulic steering cylinder parts.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350723803,"sku":"TEL-HS5182","price":67.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/HS5182__14518.1722511870.500.750.jpg?v=1785188295"},{"product_id":"seastar-hs5161-helm-seal-kit-for-250v-75v-and-1250v-75v-steering-helm-pumps","title":"SeaStar HS5161 Seal Kit for 250V\/75V and 1250V\/75V Helm Pumps","description":"\u003cp\u003eThe SeaStar HS5161 is a seal kit engineered to service SeaStar 250V\/75V and 1250V\/75V helm pumps, restoring hydraulic steering performance when internal seals wear or begin to leak. As boats log hours on the water, the internal seals in a hydraulic helm pump are exposed to constant pressure cycling and fluid contact, and over time they can lose their sealing ability, leading to soft steering, fluid seepage, or a loss of steering feedback. The HS5161 kit provides the replacement seal components needed to rebuild the helm pump and return it to proper working order without purchasing an entirely new unit.\u003c\/p\u003e\u003cp\u003eThis kit is built for the SeaStar 250V\/75V and 1250V\/75V helm pump models specifically, so it is intended for boat owners and marine technicians performing routine maintenance or troubleshooting a steering fluid leak on these units. The kit includes one full set of components per package and is made with plastic parts sized to fit the factory helm pump housing. Because it is a direct-fit kit for these named SeaStar helm pump models, it simplifies sourcing the correct seals without guesswork.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HS5161\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Helm Pump Models:\u003c\/strong\u003e 250V\/75V, 1250V\/75V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957806307\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSeaStar 250V\/75V helm pump\u003c\/li\u003e\n\u003cli\u003eSeaStar 1250V\/75V helm pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HS5161 seal kit used for?\u003c\/strong\u003e The HS5161 is a seal kit for rebuilding SeaStar 250V\/75V and 1250V\/75V helm pumps when internal seals wear out or start leaking hydraulic fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich helm pumps does the HS5161 fit?\u003c\/strong\u003e It fits the SeaStar 250V\/75V helm pump and the SeaStar 1250V\/75V helm pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many kits do I need for one helm pump?\u003c\/strong\u003e One HS5161 kit contains one complete set of seal components, and the package quantity is one item per kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the seals made of?\u003c\/strong\u003e The seal components in the SeaStar HS5161 kit are made of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the parts in the HS5161 kit?\u003c\/strong\u003e The components included in the HS5161 seal kit are black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HS5161 seal kit weigh?\u003c\/strong\u003e The SeaStar HS5161 seal kit weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the HS5161 kit stop a steering fluid leak?\u003c\/strong\u003e Yes, replacing worn seals with the HS5161 kit is intended to restore proper sealing in a SeaStar 250V\/75V or 1250V\/75V helm pump and resolve leaks caused by seal wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HS5161 an OEM SeaStar part?\u003c\/strong\u003e Yes, HS5161 is the SeaStar manufacturer part number for this seal kit, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the HS5161 seal kit myself?\u003c\/strong\u003e The HS5161 kit is designed to rebuild the helm pump's internal seals, which is typically done by a boat owner or marine technician familiar with servicing SeaStar hydraulic steering pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the HS5161 kit box?\u003c\/strong\u003e The HS5161 package includes one seal kit for the SeaStar 250V\/75V and 1250V\/75V helm pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HS5161 kit come with a warranty?\u003c\/strong\u003e The SeaStar HS5161 seal kit is backed by a limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HS5161 kit the same for both the 250V\/75V and 1250V\/75V pumps?\u003c\/strong\u003e Yes, the SeaStar HS5161 kit is listed as compatible with both the 250V\/75V and 1250V\/75V helm pump models.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350822107,"sku":"TEL-HS5161","price":62.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/tel-hs5161_lg__96632.1558179287.500.750.jpg?v=1785188363"},{"product_id":"seastar-hs5157-front-mount-cylinder-seal-kit-fits-hc5345-hc5347-hc5348-pivot-steering-cylinders-2-seal-glands-pin-wrench-guide-tool","title":"SeaStar HS5157 Front Mount Cylinder Seal Kit for HC5340-HC5445 and HC6750-HC6755 Cylinders","description":"\u003cp\u003eThe SeaStar HS5157 is a front seal kit for SeaStar pivot and front mount hydraulic steering cylinders. It restores the sealing surfaces inside the cylinder that wear over time from normal steering use, water intrusion, and age, which can lead to hydraulic fluid leaks, spongy steering feel, or loss of steering pressure. The kit includes two metal, round seal glands, a pin wrench, and a seal gland assembly guide tool, giving an installer everything needed to remove the old glands and seat the new ones correctly without damaging the O-rings during assembly.\u003c\/p\u003e\u003cp\u003eHS5157 is designed for SeaStar front mount cylinders including the HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, and HC5445 series, as well as the HC6750 through HC6755 series. This covers threaded-end-gland cylinders, pivot cylinders (including Honda 115-130 and OMC-specific applications), and compact cylinders. A related kit, HS5167, uses the same seal glands and guide tool but ships without the pin wrench, so buyers who already own a wrench or prefer to source one separately have that option under a different part number. Always confirm the cylinder model number before ordering to be sure the correct seal kit is selected.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HS5157\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Front Mount Cylinder Seal Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 2 Seal Glands, Pin Wrench, Seal Gland Assembly Guide Tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.53 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957806277\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSeaStar front mount cylinders: HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445\u003c\/li\u003e\n\u003cli\u003eSeaStar front mount cylinders: HC6750, HC6751, HC6752, HC6753, HC6754, HC6755\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SeaStar HS5157 seal kit?\u003c\/strong\u003e HS5157 includes two seal glands, a pin wrench, and a seal gland assembly guide tool, everything needed to reseal a SeaStar front mount steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich SeaStar cylinders does HS5157 fit?\u003c\/strong\u003e HS5157 fits the HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, and HC5445 front mount cylinders, along with the HC6750 through HC6755 series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes HS5157 include a pin wrench?\u003c\/strong\u003e Yes, the pin wrench is included in HS5157. A related kit, HS5167, contains the same seal glands and guide tool but ships without the wrench.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the seal glands made of?\u003c\/strong\u003e The seal glands in the HS5157 kit are metal and round in shape, matching the OEM gland design used in SeaStar front mount cylinders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HS5157 seal kit weigh?\u003c\/strong\u003e The HS5157 front mount cylinder seal kit weighs 0.53 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HS5157 compatible with the HC5347 pivot cylinder used on Honda outboards?\u003c\/strong\u003e Yes, HS5157 is compatible with the HC5347 pivot cylinder, which is used in Honda 115-130 horsepower applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HS5157 compatible with the HC5348 pivot cylinder used on OMC outboards?\u003c\/strong\u003e Yes, HS5157 is compatible with the HC5348 pivot cylinder, an OMC-specific pivot cylinder application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan HS5157 be used on a SeaRay compact cylinder?\u003c\/strong\u003e Yes, HS5157 fits the HC5394 SeaRay compact cylinder in addition to the other listed front mount cylinder models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between HS5157 and HS5167?\u003c\/strong\u003e HS5157 and HS5167 use the same two seal glands and guide tool, but HS5157 includes a pin wrench while HS5167 ships without one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would steering feel spongy or leak fluid on a SeaStar front mount cylinder?\u003c\/strong\u003e Worn seal glands inside a SeaStar front mount cylinder like the HC5345 or HC5445 can allow hydraulic fluid to leak past, causing spongy steering or pressure loss; the HS5157 kit replaces those glands to restore proper sealing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a special tool needed to install the HS5157 seal kit?\u003c\/strong\u003e The HS5157 kit includes its own pin wrench and seal gland assembly guide tool, so no additional specialty tools are required to install the new seal glands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HS5157 a genuine SeaStar part?\u003c\/strong\u003e Yes, HS5157 is the SeaStar manufacturer part number for this front mount cylinder seal kit.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350887643,"sku":"TEL-HS5157","price":188.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/TEL-HS5157__89946.1723560147.500.750.jpg?v=1785188087"},{"product_id":"seastar-hs5201-seal-kit-for-1-inch-shaft-rear-mount-hydraulic-helm-pumps-seastar-1-4-and-1-7","title":"SeaStar Helm Pump Seal Kit, 1 Inch Shaft, HS5201 - Fits HH5279-3, HH5280-3, HH5281-3 Rear Mount Cylinders","description":"\u003cp\u003eThe SeaStar HS5201 is a 1 inch shaft seal kit for SeaStar hydraulic steering helm pump cylinders. It is the seal kit specified for the SeaStar 1.4 rear mount cylinder with a 1 inch straight shaft (HH5279-3), the SeaStar 1.4 rear mount cylinder with a 1 inch tapered shaft (HH5280-3), and the SeaStar 1.7 rear mount cylinder with a 1 inch tapered shaft (HH5281-3). Boat owners and marine technicians use this kit to restore proper sealing inside these helm pump cylinder assemblies when a steering system starts to feel spongy, loses pressure, or shows signs of hydraulic fluid seepage around the shaft. Because HS5201 is shared across three different SeaStar rear mount cylinder part numbers, it lets a shop stock a single seal kit to service multiple helm pump builds within the 1.4 and 1.7 rear mount lineup, provided the shaft is the 1 inch size. At 0.06 pounds, the kit ships and stores easily as a small parts-bin item alongside other helm pump service components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HS5201\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Helm Pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Size:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Cylinder Assemblies:\u003c\/strong\u003e HH5279-3, HH5280-3, HH5281-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957899224\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSeaStar 1.4 rear mount cylinder, 1 inch straight shaft (HH5279-3)\u003c\/li\u003e\n\u003cli\u003eSeaStar 1.4 rear mount cylinder, 1 inch tapered shaft (HH5280-3)\u003c\/li\u003e\n\u003cli\u003eSeaStar 1.7 rear mount cylinder, 1 inch tapered shaft (HH5281-3)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HS5201 seal kit used for?\u003c\/strong\u003e HS5201 is a seal kit used to reseal SeaStar hydraulic steering helm pump cylinders when the shaft seals wear out or start to leak.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich SeaStar cylinder assemblies use the HS5201 seal kit?\u003c\/strong\u003e HS5201 is the seal kit for three SeaStar rear mount cylinder assemblies: HH5279-3, HH5280-3, and HH5281-3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shaft size does the HS5201 seal kit fit?\u003c\/strong\u003e This kit is sized for a 1 inch shaft, matching the shaft diameter used on the HH5279-3, HH5280-3, and HH5281-3 cylinders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes HS5201 work with both straight and tapered shaft cylinders?\u003c\/strong\u003e Yes. It is used in the straight shaft HH5279-3 cylinder as well as the tapered shaft HH5280-3 and HH5281-3 cylinders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HS5201 for a SeaStar 1.4 or 1.7 rear mount system?\u003c\/strong\u003e Both. HH5279-3 and HH5280-3 are SeaStar 1.4 rear mount cylinders, while HH5281-3 is a SeaStar 1.7 rear mount cylinder, and all three use the HS5201 seal kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HS5201 seal kit weigh?\u003c\/strong\u003e The SeaStar HS5201 seal kit weighs 0.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar HS5201 seal kit?\u003c\/strong\u003e The UPC for HS5201 is 731957899224.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HS5201 a genuine SeaStar part?\u003c\/strong\u003e Yes, HS5201 is the SeaStar manufacturer part number for this helm pump seal kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product category does HS5201 fall under?\u003c\/strong\u003e HS5201 is listed under Helm Pumps as a seal kit component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan HS5201 be used to rebuild a SeaStar 1.4 rear mount helm pump with a straight shaft?\u003c\/strong\u003e Yes, HS5201 is the specified seal kit for the SeaStar 1.4 rear mount cylinder with a 1 inch straight shaft, part number HH5279-3.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350953179,"sku":"TEL-HS5201","price":54.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/TEL-HS5201__77653.1558340885.500.750.jpg?v=1785329141"},{"product_id":"uflex-hytech-1-1t-tilt-mount-hydraulic-outboard-steering-system-with-tube-for-engines-up-to-175-hp","title":"Uflex HYTECH 1.1T Tilt Mount Hydraulic Steering System for Outboards up to 175 HP","description":"\u003cp\u003eThe Uflex HYTECH 1.1T is a tilt mount hydraulic steering system built for outboard engines rated at 175 HP and less. As a tilt mount configuration, the helm assembly is designed to be installed with the steering tube oriented for tilt-style mounting, distinguishing it from Uflex's front mount hydraulic systems (such as the HYTECH 2.1 and HYTECH 3.1) which are built for the same horsepower range but require front mount installation. The system is supplied complete with tube, giving installers the components needed to set up hydraulic steering on a single outboard application without hunting down separate hydraulic tubing.\u003c\/p\u003e\u003cp\u003eHydraulic steering systems like the HYTECH 1.1T are used to replace mechanical (rotary or rack) steering on outboard-powered boats, giving the helm smoother, lower-effort turning and reducing feedback and kickback at the wheel, especially as engine horsepower increases. Because it is rated specifically for 175 HP and less, it is sized for the loads produced by outboards at or under that horsepower threshold rather than larger, higher-horsepower installations.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HYTECH 1.1T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Tilt Mount Low HP Steering System w\/Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Hydraulic Steering System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Tilt Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower Rating:\u003c\/strong\u003e 175 HP and less\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Hydraulic Steering Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 30.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755053026\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOutboard engines rated 175 HP and less\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Uflex HYTECH 1.1T?\u003c\/strong\u003e The HYTECH 1.1T is a tilt mount hydraulic steering system for outboard engines rated at 175 HP and less, supplied complete with a steering tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HYTECH 1.1T a front mount or tilt mount system?\u003c\/strong\u003e It is a tilt mount hydraulic steering system, which differs from Uflex's front mount hydraulic systems such as the HYTECH 2.1 and HYTECH 3.1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat horsepower range is the HYTECH 1.1T rated for?\u003c\/strong\u003e 175 HP and less is the rated horsepower range for the HYTECH 1.1T tilt mount hydraulic steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HYTECH 1.1T come with the hydraulic steering tube?\u003c\/strong\u003e Yes, the HYTECH 1.1T tilt mount system is supplied as a complete kit that includes the steering tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HYTECH 1.1T steering system weigh?\u003c\/strong\u003e The complete Uflex HYTECH 1.1T tilt mount hydraulic steering system weighs 30.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the HYTECH 1.1T and the HYTECH 2.1?\u003c\/strong\u003e Both are rated for outboards of 175 HP and less, but the HYTECH 1.1T is a tilt mount system while the HYTECH 2.1 is a front mount hydraulic system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HYTECH 1.1T be used on higher horsepower outboards?\u003c\/strong\u003e No, the HYTECH 1.1T is rated specifically for outboard engines of 175 HP and less.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of boat application is the HYTECH 1.1T designed for?\u003c\/strong\u003e It is designed for single outboard engine applications requiring tilt mount hydraulic steering, for engines up to 175 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HYTECH 1.1T a mechanical or hydraulic steering system?\u003c\/strong\u003e The HYTECH 1.1T is a hydraulic steering system, not a mechanical rotary or rack system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is the HYTECH 1.1T?\u003c\/strong\u003e The HYTECH 1.1T is classified as a hydraulic steering kit within the tilt mount low HP steering system line.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991092113627,"sku":"UFX-HYTECH 1.1T","price":1537.12,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Hytech_1.1T__65232.1722512986.500.750.jpg?v=1785329219"},{"product_id":"uflex-hytech-1-1-front-mount-outboard-hydraulic-steering-system-up-to-175-hp-comparable-to-seastar-baystar-hk4200a","title":"Uflex HYTECH 1.1 Front Mount Hydraulic Outboard Steering System for 175 HP and Less","description":"\u003cp\u003eThe Uflex HYTECH 1.1 is a complete front mount hydraulic steering system built for outboard engines rated 175 HP and less. It is designed to work with the HK4200a - BayStar helm, giving outboard boat owners a hydraulic steering setup without the heavy effort of a mechanical cable system. The package brings together the core components needed for a front mount installation: a UP20 FM helm pump, a UC95-OBF hydraulic cylinder, 40 feet of hydraulic tubing, and 2 quarts of steering fluid, so the major hardware for the run is included in one system rather than sourced piece by piece.\u003c\/p\u003e\u003cp\u003eFront mount hydraulic steering positions the cylinder at the front of the outboard, which is the standard mounting configuration for this HYTECH 1.1 system (as opposed to the tilt mount arrangement used on the related HYTECH 1.1T). The system is constructed with plastic components and is intended for single outboard engine installations up to 175 HP. Because it is a hydraulic system, it delivers smoother, lower-effort steering feel at the helm compared to mechanical steering cables, and the 40 foot tubing run supports a range of helm-to-engine distances on typical outboard boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HYTECH 1.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Outboard Steering System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Front Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower Rating:\u003c\/strong\u003e 175 HP and less\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Helm:\u003c\/strong\u003e HK4200a - BayStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Cylinder:\u003c\/strong\u003e UC95-OBF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Helm Pump:\u003c\/strong\u003e UP20 FM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTubing Length:\u003c\/strong\u003e 40 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Oil Included:\u003c\/strong\u003e 2 quarts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 26.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 29 inches L x 18 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755051114\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOutboard engines rated 175 HP and less\u003c\/li\u003e\n\u003cli\u003eFront mount installation\u003c\/li\u003e\n\u003cli\u003eCompatible with the HK4200a - BayStar helm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat horsepower range is the Uflex HYTECH 1.1 rated for?\u003c\/strong\u003e The HYTECH 1.1 is rated for outboard engines of 175 HP and less.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HYTECH 1.1 a front mount or tilt mount system?\u003c\/strong\u003e It is a front mount hydraulic steering system. Uflex also offers the HYTECH 1.1T, which is the tilt mount version for the same 175 HP and less rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat helm does the HYTECH 1.1 work with?\u003c\/strong\u003e This system is set up for use with the HK4200a - BayStar helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Uflex HYTECH 1.1 system?\u003c\/strong\u003e The HYTECH 1.1 package includes a UP20 FM helm pump, a UC95-OBF hydraulic cylinder, 40 feet of hydraulic tubing, and 2 quarts of steering fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much hydraulic tubing comes with the HYTECH 1.1?\u003c\/strong\u003e 40 feet of tubing is included with the HYTECH 1.1 system, enough for the helm-to-engine run on most outboard boat layouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much fluid is needed to fill the HYTECH 1.1 system?\u003c\/strong\u003e 2 quarts of hydraulic steering oil are included with the HYTECH 1.1 package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Uflex HYTECH 1.1 system weigh?\u003c\/strong\u003e The complete HYTECH 1.1 system weighs 26.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the HYTECH 1.1 packaging?\u003c\/strong\u003e The HYTECH 1.1 measures approximately 29 inches long by 18 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the HYTECH 1.1 cylinder made from?\u003c\/strong\u003e The UC95-OBF cylinder included in the HYTECH 1.1 system is made from plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HYTECH 1.1 hydraulic steering easier to operate than a mechanical cable system?\u003c\/strong\u003e Yes, as a hydraulic system the HYTECH 1.1 provides smoother, lower-effort steering at the helm compared to a mechanical steering cable setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HYTECH 1.1 work for a single or dual outboard installation?\u003c\/strong\u003e The HYTECH 1.1 is a single-cylinder front mount system designed for a single outboard engine rated 175 HP and less.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the HYTECH 1.1 and HYTECH 2.1?\u003c\/strong\u003e Both the HYTECH 1.1 and HYTECH 2.1 are front mount systems rated for outboards of 175 HP and less and both use the HK4200a - BayStar helm; they are listed as separate part numbers within the Uflex HYTECH steering lineup.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991097094363,"sku":"UFX-HYTECH 1.1","price":1134.47,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/UFX-HYTECH_1__50281.1722380532.500.750.jpg?v=1785188467"},{"product_id":"uflex-protech-1-1-front-mount-outboard-hydraulic-steering-system-up28-helm-uc128-obf-1-cylinder-oil-no-hoses","title":"Uflex PROTECH 1.1 Front Mount Outboard Hydraulic Steering System with UC128-OBF\/1 Cylinder","description":"\u003cp\u003eThe Uflex PROTECH 1.1 is a front mount hydraulic steering package built for single-outboard boats. The system pairs a front mount helm pump with the UC128-OBF\/1 hydraulic cylinder and ships with 2 quarts of hydraulic oil to charge the system. Hoses are not included with the PROTECH 1.1; an optional hose kit with preassembled fittings is available separately and length must be specified when ordering.\u003c\/p\u003e\u003cp\u003eDurability and performance define the PROTECH 1.1 package. The helm shaft is stainless steel and is fitted with heavy duty shaft seals, while the cylinder uses a carbon steel piston for peak performance. The link assemblies are 304 electropolished and passivated stainless steel, chosen for long-term corrosion resistance in a marine environment. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings from over-tightening, simplifying installation and future service.\u003c\/p\u003e\u003cp\u003eThe PROTECH 1.1 is the single-cylinder configuration in the PROTECH front mount outboard steering lineup, sized for one outboard engine. Larger multi-engine setups use the same helm pump with additional cylinders in the PROTECH 2.1 and PROTECH 3.1 packages.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PROTECH 1.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Front Mount Outboard Hydraulic Steering System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Cylinder:\u003c\/strong\u003e UC128-OBF\/1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Oil Included:\u003c\/strong\u003e 2 quarts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelm Shaft Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiston Material:\u003c\/strong\u003e Carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLink Assembly Material:\u003c\/strong\u003e 304 electropolished and passivated stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Adjustable boss style\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHoses:\u003c\/strong\u003e Sold separately; optional hose kit with preassembled fittings, length specified at order\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 28.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e approximately 23 inches L x 11 inches W x 8 inches H\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for single-outboard installations using a front mount helm pump configuration.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are published for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Uflex PROTECH 1.1?\u003c\/strong\u003e The Uflex PROTECH 1.1 package includes a front mount helm pump, a UC128-OBF\/1 hydraulic cylinder, and 2 quarts of hydraulic oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the PROTECH 1.1 come with hydraulic hoses?\u003c\/strong\u003e No, hoses are not included with the PROTECH 1.1. An optional hose kit with preassembled fittings is available separately, and length must be specified when ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich cylinder does the PROTECH 1.1 use?\u003c\/strong\u003e The PROTECH 1.1 uses the UC128-OBF\/1 front mount outboard cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much hydraulic oil is needed for the PROTECH 1.1?\u003c\/strong\u003e 2 quarts of hydraulic oil are included with the PROTECH 1.1 to charge the system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the helm shaft made of on the PROTECH 1.1?\u003c\/strong\u003e The PROTECH 1.1 helm shaft is stainless steel, fitted with heavy duty shaft seals for durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the PROTECH 1.1 piston made from?\u003c\/strong\u003e The cylinder piston in the PROTECH 1.1 system is carbon steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the link assemblies corrosion resistant?\u003c\/strong\u003e Yes, the PROTECH 1.1 link assemblies are 304 electropolished and passivated stainless steel for long-term corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PROTECH 1.1 a front mount or aft mount system?\u003c\/strong\u003e The PROTECH 1.1 is a front mount hydraulic steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PROTECH 1.1 designed for outboard or sterndrive boats?\u003c\/strong\u003e The PROTECH 1.1 is a front mount outboard (OB) hydraulic steering package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the PROTECH 1.1 system weigh?\u003c\/strong\u003e The Uflex PROTECH 1.1 weighs 28.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the PROTECH 1.1, 2.1, and 3.1?\u003c\/strong\u003e The PROTECH 1.1 uses a single UC128-OBF\/1 cylinder for one outboard engine, while the PROTECH 2.1 and PROTECH 3.1 use the same front mount helm pump paired with UC128-OBF\/2 and UC128-OBF\/3 cylinders for twin- and triple-outboard installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I order longer hoses for the PROTECH 1.1?\u003c\/strong\u003e Yes, an optional hose kit with preassembled fittings is available for the PROTECH 1.1, and the required length must be specified when ordering.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991108694235,"sku":"UFX-PROTECH 1.1","price":1542.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Uflex-ProTech-Hydraulic-Steering-System__60321.1739476157.500.750.jpg?v=1785188245"},{"product_id":"uflex-protech-3-1-front-mount-outboard-hydraulic-steering-system-with-uc128-obf-3-cylinder","title":"Uflex PROTECH 3.1 Front Mount Outboard Hydraulic Steering Cylinder with UC128-OBF\/3 Cylinder","description":"\u003cp\u003eThe Uflex PROTECH 3.1 is a front mount outboard hydraulic steering cylinder built as part of the Protech front mount outboard steering package. It is supplied with the UC128-OBF\/3 cylinder configuration, distinguishing it from the PROTECH 1.1 (UC128-OBF\/1 cylinder) and PROTECH 2.1 (UC128-OBF\/2 cylinder) in the same line. Engine type must be specified when ordering so the correct cylinder configuration is supplied.\u003c\/p\u003e\u003cp\u003eConstruction is focused on longevity and consistent performance under load. The helm shaft is stainless steel and is fitted with heavy duty shaft seals to resist leakage and wear over time. The piston is carbon steel, and the link assemblies are 304 stainless steel that has been electropolished and passivated for corrosion resistance. Hose routing is handled through adjustable boss style fittings, which allow the hose position to be set precisely without the risk of breaking a fitting from over-tightening during installation.\u003c\/p\u003e\u003cp\u003eAs a component of a packaged hydraulic steering system, the PROTECH 3.1 is intended to be completed with hydraulic oil (2 quarts) and, if needed, a hose kit with preassembled fittings available in a length specified at the time of ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PROTECH 3.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Front Mount Outboard Hydraulic Steering Cylinder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder Model:\u003c\/strong\u003e UC128-OBF\/3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Front mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelm Shaft Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiston Material:\u003c\/strong\u003e Carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLink Assembly Material:\u003c\/strong\u003e 304 electropolished and passivated stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings:\u003c\/strong\u003e Adjustable boss style fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 28.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755053057\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Uflex PROTECH 3.1?\u003c\/strong\u003e The PROTECH 3.1 is a front mount outboard hydraulic steering cylinder from Uflex's Protech steering package, supplied with the UC128-OBF\/3 cylinder configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the PROTECH 3.1 different from the PROTECH 1.1 or 2.1?\u003c\/strong\u003e All three share the same Protech front mount outboard design, but the cylinder configuration differs: PROTECH 1.1 uses a UC128-OBF\/1 cylinder, PROTECH 2.1 uses a UC128-OBF\/2 cylinder, and PROTECH 3.1 uses a UC128-OBF\/3 cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials is the PROTECH 3.1 made from?\u003c\/strong\u003e It has a stainless steel helm shaft, heavy duty shaft seals, a carbon steel piston, and link assemblies made from 304 stainless steel that is electropolished and passivated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to specify anything when ordering the PROTECH 3.1?\u003c\/strong\u003e Yes, engine type must be specified when ordering the PROTECH 3.1 so the correct UC128-OBF\/3 cylinder setup is matched to the application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the PROTECH 3.1 include hydraulic oil?\u003c\/strong\u003e Hydraulic oil is offered separately in 2 quart quantities to fill the Protech steering system that the PROTECH 3.1 cylinder is part of.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a hose kit included with the PROTECH 3.1?\u003c\/strong\u003e A hose kit with preassembled fittings is available as an optional accessory for the Protech system, with the length specified at the time of ordering; it is not built into the PROTECH 3.1 cylinder itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the PROTECH 3.1 weigh?\u003c\/strong\u003e The Uflex PROTECH 3.1 weighs 28.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of fittings does the PROTECH 3.1 use?\u003c\/strong\u003e It uses adjustable boss style fittings, which allow precise hose routing and reduce the risk of a fitting breaking from over-tightening during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PROTECH 3.1 designed for inboard or outboard applications?\u003c\/strong\u003e The PROTECH 3.1 is a front mount outboard cylinder, built specifically for outboard steering applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Uflex PROTECH 3.1?\u003c\/strong\u003e The Uflex PROTECH 3.1 front mount outboard steering cylinder carries UPC 702755053057.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991108759771,"sku":"UFX-PROTECH 3.1","price":1542.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Uflex-ProTech-Hydraulic-Steering-System__69349.1739476157.500.750.jpg?v=1785188073"},{"product_id":"uflex-silversteer-1-0-hydraulic-outboard-steering-system-1500-psi-kit-with-up28svs-helm-and-uc128svs-cylinder","title":"Uflex SilverSteer 1.0 Hydraulic Steering System Kit, 1500 PSI High Performance Helm and Cylinder","description":"\u003cp\u003eThe Uflex SilverSteer 1.0 is a hydraulic steering system built for high performance applications that put extreme rudder torque loads on a boat's steering, such as bass boats, flats boats, and tournament style offshore fishing boats. The kit is engineered around a 1500 psi helm paired with a cylinder that uses a keyed bullhorn design for maximum durability and minimal lost motion, so the steering stays smooth, responsive, and precise even under hard-charging conditions where lesser systems develop play or lag.\u003c\/p\u003e\u003cp\u003eThe cylinder and helm use adjustable boss style fittings, which allow the hose routing to be positioned precisely without the risk of breaking fittings from overtightening, or leaking fittings caused by loosening during installation, a common failure point on competing hydraulic steering cylinders. The kit ships complete with the helm, the cylinder, and oil, and is designed to deliver a premium steering response for boaters who demand accuracy at speed. A separate hose kit is required to complete installation and is not included, and the steering wheel itself is also sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SILVERSTEER1.0B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e SilverSteer 1.0 Hydraulic Steering System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelm:\u003c\/strong\u003e UP28SVS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder:\u003c\/strong\u003e UC128SVS with keyed bullhorn\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Pressure:\u003c\/strong\u003e 1500 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Oil:\u003c\/strong\u003e 2 quarts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Adjustable boss style fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 28.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequires (sold separately):\u003c\/strong\u003e OB-SVS hose kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Wheel:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Uflex SilverSteer 1.0 kit?\u003c\/strong\u003e The SilverSteer 1.0 (SILVERSTEER1.0B) kit includes the UP28SVS helm, the UC128SVS cylinder, and 2 quarts of hydraulic steering oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the steering wheel included with the SilverSteer 1.0?\u003c\/strong\u003e No, the steering wheel is not included with the SilverSteer 1.0 hydraulic steering system and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any additional parts to install the SilverSteer 1.0?\u003c\/strong\u003e Yes, an OB-SVS hose kit is required to complete installation of the SilverSteer 1.0 and is sold separately from the helm and cylinder kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat pressure rating does the SilverSteer 1.0 helm have?\u003c\/strong\u003e The helm in the SilverSteer 1.0 system is rated at 1500 psi, which is built to handle the extreme rudder torque loads found in high performance boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of boats is the SilverSteer 1.0 designed for?\u003c\/strong\u003e This hydraulic steering system is designed for high performance, high torque applications such as bass boats, flats boats, and tournament style offshore fishing boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SilverSteer 1.0 system weigh?\u003c\/strong\u003e The SilverSteer 1.0 (SILVERSTEER1.0B) weighs 28.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes the SilverSteer 1.0 cylinder different from other hydraulic steering cylinders?\u003c\/strong\u003e The UC128SVS cylinder in the SilverSteer 1.0 uses a keyed bullhorn design for maximum durability and minimal lost motion, giving smoother and more precise steering than cylinders without this feature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the SilverSteer 1.0 use adjustable boss style fittings?\u003c\/strong\u003e Adjustable boss style fittings on the SilverSteer 1.0 allow precise hose routing without the risk of breaking fittings from overtightening or leaking fittings from loosening, a common issue with competing hydraulic steering cylinders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the main material used in the SilverSteer 1.0 system?\u003c\/strong\u003e The SilverSteer 1.0 hydraulic steering system is constructed with plastic components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SilverSteer 1.0 a universal fit system?\u003c\/strong\u003e Yes, the SilverSteer 1.0 is designed as a universal fit hydraulic steering system for boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much oil comes with the SilverSteer 1.0 kit?\u003c\/strong\u003e The SilverSteer 1.0 kit (SILVERSTEER1.0B) comes with 2 quarts of hydraulic steering oil included.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991114264795,"sku":"UFX-SILVERSTEER1.0B","price":1780.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/UFX-SILVERSTEER1.0B__04224.1722382630.500.750.jpg?v=1785188624"},{"product_id":"uflex-uc128-ts-front-mount-hydraulic-steering-cylinder-stainless-steel-marine-helm-cylinder-mpn-uc128ts-1","title":"Uflex UC128TS-1 Hydraulic Steering Cylinder, Stainless Steel","description":"\u003cp\u003eThe Uflex UC128TS-1 is a hydraulic steering cylinder built with stainless steel construction for use in a marine hydraulic steering system. Hydraulic cylinders like this one convert helm pump pressure into the mechanical motion that turns the outboard or sterndrive at the transom, and they are a core replacement component whenever a boat's steering cylinder wears out, leaks, or needs to be upgraded. The UC128TS-1 measures 23 inches by 7 inches and weighs 12 pounds, giving it the size and heft typical of a dedicated steering cylinder assembly rather than a small accessory part.\u003c\/p\u003e\u003cp\u003eBecause it is sold under the UC128TS-1 part number, it is intended as a direct, like-for-like replacement for boats that already specify this exact Uflex cylinder, and it should be ordered by matching this part number rather than by boat model alone.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e UC128TS-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Steering Cylinder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 23 inches L x 7 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755049203\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Uflex UC128TS-1?\u003c\/strong\u003e The UC128TS-1 is a hydraulic steering cylinder from Uflex, built with stainless steel construction and used as part of a marine hydraulic steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the UC128TS-1 made from?\u003c\/strong\u003e Stainless steel is the material used in the UC128TS-1 hydraulic steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the UC128TS-1 weigh?\u003c\/strong\u003e The UC128TS-1 weighs 12 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the UC128TS-1 cylinder?\u003c\/strong\u003e The UC128TS-1 measures 23 inches long by 7 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many units come in a package?\u003c\/strong\u003e The UC128TS-1 ships with a package quantity of 1, meaning one cylinder per order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the UC128TS-1 a genuine Uflex part?\u003c\/strong\u003e Yes, UC128TS-1 is the manufacturer part number assigned by Uflex to this hydraulic steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I make sure I am ordering the correct cylinder for my boat?\u003c\/strong\u003e Match the part number UC128TS-1 directly, since this is the specific identifier Uflex uses for this hydraulic steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with the UC128TS-1?\u003c\/strong\u003e The UPC for the Uflex UC128TS-1 hydraulic steering cylinder is 702755049203.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of steering component is the UC128TS-1?\u003c\/strong\u003e The UC128TS-1 is classified as a hydraulic steering cylinder, the component that converts helm pump pressure into steering motion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the UC128TS-1 include mounting hardware in the box?\u003c\/strong\u003e Only the UC128TS-1 hydraulic steering cylinder itself is confirmed as part of the package; additional mounting hardware is not specified.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991115116763,"sku":"UFX-UC128TS-1","price":913.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/UFX-UC128TS-1__31893.1722494787.500.750.jpg?v=1785188649"},{"product_id":"uflex-uc128ts-3-hydraulic-steering-cylinder-for-marine-outboard-and-inboard-systems","title":"Uflex UC128TS-3 Hydraulic Steering Cylinder, Version 3","description":"\u003cp\u003eThe Uflex UC128TS-3 is a hydraulic steering cylinder, the Version 3 iteration of Uflex's UC128TS design, built for boats equipped with hydraulic steering systems. As the actuating component of the steering system, the cylinder converts hydraulic pressure from the helm pump into mechanical movement at the outboard or sterndrive, translating helm input into steering action at the drive. It is categorized by Uflex as a Hydraulic Steering Cylinder and is identified by the manufacturer part number UC128TS-3.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e UC128TS-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Hydraulic Steering Cylinder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersion:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755053071\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Uflex UC128TS-3?\u003c\/strong\u003e The UC128TS-3 is a hydraulic steering cylinder made by Uflex, listed under the manufacturer's Hydraulic Steering Cylinders category. It is the Version 3 iteration of the UC128TS design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the UC128TS-3 weigh?\u003c\/strong\u003e The Uflex UC128TS-3 weighs 12.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Uflex UC128TS-3?\u003c\/strong\u003e The UPC for the Uflex UC128TS-3 hydraulic steering cylinder is 702755053071.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a hydraulic steering cylinder do?\u003c\/strong\u003e A hydraulic steering cylinder, such as the Uflex UC128TS-3, is the actuating component of a boat's hydraulic steering system, converting hydraulic pressure delivered from the helm pump into the mechanical movement that steers the drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this cylinder?\u003c\/strong\u003e The manufacturer part number is UC128TS-3, made by Uflex.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the UC128TS-3 a new design or an update to an existing one?\u003c\/strong\u003e The UC128TS-3 is labeled Version 3 by Uflex, indicating it is the third version of the UC128TS hydraulic steering cylinder line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the UC128TS-3 hydraulic steering cylinder?\u003c\/strong\u003e Uflex is the manufacturer of the UC128TS-3 hydraulic steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is the UC128TS-3?\u003c\/strong\u003e Uflex classifies the UC128TS-3 as a Hydraulic Steering Cylinder.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991115444443,"sku":"UFX-UC128TS-3","price":913.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/UFX-UC128TS-3.1__08907.1722501748.500.750.jpg?v=1785329220"},{"product_id":"uflex-uc128ts-2-front-mount-hydraulic-steering-cylinder-1-38-in-bore-x-7-8-in-stroke-2-front-link-arm","title":"Uflex UC128TS-2 Hydraulic Steering Cylinder, 1.38 Inch Bore, 7.8 Inch Stroke, Front Mount","description":"\u003cp\u003eThe Uflex UC128TS-2 is a hydraulic steering cylinder built for helm-driven marine steering systems. It is the Version 2 configuration of the UC128TS cylinder line, featuring a 1.38 inch bore and a 7.8 inch stroke that convert hydraulic pressure from the helm pump into linear motion at the outboard or sterndrive tiller arm. This cylinder is set up with a front #2 link arm and a front mount orientation, so it is designed to be installed at the forward mounting position of the steering assembly with the link arm engaging from the front side of the unit.\u003c\/p\u003e\u003cp\u003eAs a hydraulic cylinder, it is a core component of a helm-to-engine hydraulic steering system, working in tandem with the helm pump, hydraulic hoses, and fittings to deliver steering response at the outboard. Because it is specified as a front-mount, front #2 link arm cylinder, it is intended for steering setups that call for that exact mounting and link arm configuration; installers should confirm their existing cylinder's mount position and link arm number match before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e UC128TS-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Hydraulic Steering Cylinder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBore Diameter:\u003c\/strong\u003e 1.38 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke Length:\u003c\/strong\u003e 7.8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLink Arm:\u003c\/strong\u003e Front #2 Link Arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Front Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 23 x 6 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755049227\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bore and stroke of the Uflex UC128TS-2 cylinder?\u003c\/strong\u003e The UC128TS-2 has a 1.38 inch bore and a 7.8 inch stroke.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cylinder front mount or rear mount?\u003c\/strong\u003e The UC128TS-2 is a front-mount hydraulic steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat link arm configuration does the UC128TS-2 use?\u003c\/strong\u003e It is fitted with a front #2 link arm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the UC128TS-2 weigh?\u003c\/strong\u003e The Uflex UC128TS-2 hydraulic steering cylinder weighs 11.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between UC128TS and UC128TS-2?\u003c\/strong\u003e UC128TS-2 is the Version 2 configuration of the UC128TS hydraulic steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions for shipping?\u003c\/strong\u003e The UC128TS-2 ships in a package measuring 23 x 6 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the UC128TS-2 made of?\u003c\/strong\u003e The UC128TS-2 cylinder assembly includes plastic components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cylinder fit my existing steering setup?\u003c\/strong\u003e The UC128TS-2 is built specifically as a front-mount cylinder with a front #2 link arm, so it will only fit steering systems that call for that exact mount position and link arm number; confirm your current cylinder's configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat system does the UC128TS-2 work with?\u003c\/strong\u003e The UC128TS-2 is a hydraulic steering cylinder designed to work as part of a helm-to-engine hydraulic steering system, converting hydraulic pressure from the helm pump into steering motion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the UC128TS-2 include mounting hardware?\u003c\/strong\u003e The listing for the Uflex UC128TS-2 covers the hydraulic cylinder itself as a single item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Uflex UC128TS-2?\u003c\/strong\u003e The Uflex UC128TS-2 hydraulic steering cylinder carries UPC 702755049227.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991115477211,"sku":"UFX-UC128TS-2","price":913.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/UFX-UC128TS-2__19830.1722491996.500.750.jpg?v=1785189224"},{"product_id":"uflex-uc95obf-1-front-mount-hydraulic-steering-cylinder-for-outboards-175-hp-or-less","title":"Uflex UC95OBF-1 Front Mount Hydraulic Outboard Steering Cylinder, 175 HP or Less","description":"\u003cp\u003eThe Uflex UC95OBF-1 is a front mount hydraulic outboard steering cylinder built for outboard engines rated 175 HP or less. It is the version 1 cylinder in the UC95-OBF product line, which is offered in three versions (UC95-OBF\/1, UC95-OBF\/2, and UC95-OBF\/3) to match different outboard engine applications. The UC95OBF-1 is constructed from stainless steel and features balanced operation for smooth, even steering response at the helm.\u003c\/p\u003e\u003cp\u003eBecause outboard engine steering geometry varies by manufacturer and horsepower range, Uflex offers this cylinder in engine-specific versions rather than a single universal design. The UC95-OBF\/1 version is not suitable for use with Honda BF115 and BF130 outboard engines, or with Mercury Optimax 75, 90, and 115 outboards; boat owners with those specific engines should instead use the UC95-OBF\/3 cylinder. Confirming the correct version for your engine before ordering ensures proper fit and steering performance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e UC95OBF-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e UC95-OBF (version 1 of 3)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Outboard engines, 175 HP or less\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Front mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Balanced operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755051077\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Compatibility Exclusions:\u003c\/strong\u003e Not suitable for Honda BF115 and BF130, or Mercury Optimax 75, 90, and 115 (use UC95-OBF\/3 for these engines)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for outboard engines rated 175 HP or less, front mount configuration. Not suitable for Honda BF115 and BF130 engines or Mercury Optimax 75, 90, and 115 engines; the UC95-OBF\/3 cylinder is available for those applications.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Uflex UC95OBF-1?\u003c\/strong\u003e The UC95OBF-1 is a front mount hydraulic outboard steering cylinder from Uflex USA, built for outboard engines rated 175 HP or less.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the UC95OBF-1 fit a Honda BF115 or BF130 outboard?\u003c\/strong\u003e No, the UC95OBF-1 is specifically not suitable for Honda BF115 or BF130 engines. For these engines, the UC95-OBF\/3 version of the cylinder is required instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the UC95OBF-1 work with a Mercury Optimax engine?\u003c\/strong\u003e It is not suitable for Mercury Optimax 75, 90, or 115 outboards. Owners of those engines should use the UC95-OBF\/3 cylinder rather than the UC95OBF-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat horsepower range is the UC95OBF-1 rated for?\u003c\/strong\u003e The UC95OBF-1 is rated for outboard engines of 175 HP or less.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a front mount or side mount cylinder?\u003c\/strong\u003e The UC95OBF-1 is a front mount outboard hydraulic steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the UC95OBF-1 made from?\u003c\/strong\u003e It is made from stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the UC95OBF-1 weigh?\u003c\/strong\u003e The UC95OBF-1 hydraulic cylinder weighs 9.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is meant by balanced operation on this cylinder?\u003c\/strong\u003e Balanced operation is a design feature of the UC95OBF-1 that provides smooth, even steering response through the hydraulic cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other versions of this cylinder besides the UC95OBF-1?\u003c\/strong\u003e Yes, the UC95-OBF cylinder line is available in three versions, UC95-OBF\/1, UC95-OBF\/2, and UC95-OBF\/3, to match different outboard engine applications; the UC95OBF-1 is the version 1 cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if I need the UC95OBF-1 or a different version?\u003c\/strong\u003e The version depends on your outboard engine. The UC95OBF-1 is not suitable for Honda BF115, BF130, or Mercury Optimax 75, 90, 115 engines, which require the UC95-OBF\/3 version instead; confirm compatibility with your specific engine before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Uflex UC95OBF-1?\u003c\/strong\u003e The UC95OBF-1 hydraulic cylinder has UPC 702755051077.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991118262491,"sku":"UFX-UC95OBF-1","price":659.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/UFX-UC95OBF-1__34504.1722352438.500.750.jpg?v=1785188002"},{"product_id":"uflex-up28fm-front-mount-hydraulic-helm-pump-1-7-cu-in-displacement-3-4-stainless-steel-shaft","title":"Uflex UP28FM Front Mount Hydraulic Helm Pump, 1.7 Cu In, Bass Boat Steering, 1500 PSI","description":"\u003cp\u003eThe Uflex UP28FM is a front mount hydraulic helm pump built for bass boat applications where a quick, precise steering response matters. It is part of the Uflex UP-BB series, engineered for the high horsepower, high torque outboards found on fast bass boats with very shallow deadrise hulls. Uflex describes this line as the racecar of helms, built to feel tight and responsive under load.\u003c\/p\u003e\u003cp\u003eThe UP28FM has a 1.7 cubic inch displacement and features a 1500 psi (105 bar) pressure relief valve, letting it deliver precise steering even at high torque loads. Internally, a ball bearing piston race keeps the steering feel smooth, while a built-in lock valve holds the rudder in position when the helm is not being turned. An integrated relief valve protects the system from over-pressure damage at 105 bar (1500 psi). The pump uses a 3\/4 inch tapered stainless steel shaft for long-term durability and 90 degree adjustable nickel-plated brass fittings that make hose routing easier in tight helm installations.\u003c\/p\u003e\u003cp\u003eFor correct high-torque performance, the UP28FM must be paired with the Uflex UC128-SVS hydraulic cylinder and the Uflex Kit OB-SVS hose kit, both purpose-built for this same high-torque application. This helm pump is intended for bass boat steering systems and similar fast, shallow-deadrise vessels running high horsepower motors.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e UP28FM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Helm Pump, Front Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement:\u003c\/strong\u003e 1.7 cubic inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pressure:\u003c\/strong\u003e 1500 psi (105 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft:\u003c\/strong\u003e 3\/4 inch tapered stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings:\u003c\/strong\u003e 90 degree adjustable, nickel-plated brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiston Race:\u003c\/strong\u003e Ball bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock Valve:\u003c\/strong\u003e Built-in, for positive rudder lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Valve:\u003c\/strong\u003e Integrated, over-pressure protection to 105 bar (1500 psi)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Cylinder:\u003c\/strong\u003e Uflex UC128-SVS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Hose Kit:\u003c\/strong\u003e Uflex Kit OB-SVS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755021612\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for bass boats and similar fast, shallow-deadrise vessels equipped with high horsepower, high torque outboard motors that require a quick-response front mount helm.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eThe UP28FM is a Uflex helm pump in its own product line; no OEM cross-reference or replacement numbers apply.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the Uflex UP28FM designed for?\u003c\/strong\u003e The UP28FM is a front mount helm pump designed specifically for bass boat applications with high horsepower, high torque outboard motors on fast, shallow-deadrise hulls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the displacement of the UP28FM helm pump?\u003c\/strong\u003e The UP28FM has a displacement of 1.7 cubic inches, the middle size in the Uflex UP-BB front mount helm series alongside the UP25FM and UP33FM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat pressure rating does the UP28FM have?\u003c\/strong\u003e It carries a 1500 psi (105 bar) pressure relief valve, which lets it deliver precise steering even under high torque loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the UP28FM need a specific cylinder and hoses?\u003c\/strong\u003e Yes, for correct high-torque performance the UP28FM must be paired with the Uflex UC128-SVS hydraulic cylinder and the Uflex Kit OB-SVS hose kit, both built for the same high-torque application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the shaft made of on the UP28FM?\u003c\/strong\u003e The UP28FM uses a 3\/4 inch tapered stainless steel shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of fittings come on this helm pump?\u003c\/strong\u003e The UP28FM has 90 degree adjustable, nickel-plated brass fittings, which make hose routing easier in tight helm installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a lock feature to hold the rudder in place?\u003c\/strong\u003e Yes, the UP28FM has a built-in lock valve that provides positive rudder lock when the helm is not being turned.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the UP28FM weigh?\u003c\/strong\u003e The Uflex UP28FM weighs 11.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat protects the UP28FM from over-pressure damage?\u003c\/strong\u003e An integrated relief valve protects the system from over-pressure, rated to 105 bar (1500 psi).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the UP28FM differ from the UP25FM and UP33FM?\u003c\/strong\u003e All three are part of the Uflex UP-BB front mount helm series for bass boats and share the same features, but differ in displacement size; the UP28FM is the 1.7 cubic inch version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the UP28FM include OEM cross-reference or replacement part numbers?\u003c\/strong\u003e No, the UP28FM is a Uflex helm pump in its own dedicated product line, so there are no OEM replacement numbers associated with it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps the steering feel smooth on the UP28FM?\u003c\/strong\u003e A ball bearing piston race inside the UP28FM keeps the steering action smooth and responsive.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991120687323,"sku":"UFX-UP28FM","price":837.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/UFX-UP28FM__15439.1722490819.500.750.jpg?v=1785188313"},{"product_id":"ezy-glide-hydra-stik-2500-hydraulic-stick-steering-system-for-outboards-up-to-90-hp","title":"Ezy-Glide Hydra-Stik 2500 Hydraulic Stick Steering System for Outboards up to 90 HP","description":"\u003cp\u003eThe Ezy-Glide Hydra-Stik 2500 brings the convenience of stick steering together with the power and smoothness of hydraulics. Built on the same layout as a mechanical steering stick, this system adds the benefit of smoother steering with no feedback at the helm. Steering is quick and direct, requiring only 2.8 turns from lock to lock, which means just 1.4 turns to move from center position to a full right or left turn.\u003c\/p\u003e\u003cp\u003eThe Hydra-Stik 2500 can be installed on either the port or starboard side of the vessel, and console mounting is also an option, giving installers flexibility to match the boat's layout. It is recommended for use with outboards up to 90 HP and jet drives up to 110 HP.\u003c\/p\u003e\u003cp\u003eThe kit arrives complete and ready to install, including a hydraulic helm pump, two 20 foot hydraulic hoses with fittings, a universal hydraulic cylinder, an installation package (woodruff key and shaft nut), a bezel, the Hydra-Stik lever, one liter of Hydra-Glide Hydraulic Fluid, and a full installation manual.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Ezy-Glide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HS-2500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Type:\u003c\/strong\u003e Stick Steer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurns Lock-to-Lock:\u003c\/strong\u003e 2.8 turns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Hose Length:\u003c\/strong\u003e 20 feet (set of 2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Engine Compatibility:\u003c\/strong\u003e Outboards up to 90 HP; jet drives up to 110 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Location:\u003c\/strong\u003e Port, starboard, or console mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Fluid Included:\u003c\/strong\u003e 1 liter Hydra-Glide Hydraulic Fluid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 096369250019\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRecommended for use with outboards up to 90 HP and jet drives up to 110 HP.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the turning ratio on the Ezy-Glide Hydra-Stik 2500?\u003c\/strong\u003e The Hydra-Stik 2500 has only 2.8 turns from lock to lock, meaning the operator turns just 1.4 turns to go from center position to a full right or left turn.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Hydra-Stik 2500 be mounted on either side of the boat?\u003c\/strong\u003e Yes, the HS-2500 can be installed on either the port or starboard side of the vessel, and console mounting is also an option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat horsepower range is the Hydra-Stik 2500 designed for?\u003c\/strong\u003e It is recommended for use with outboards up to 90 HP and jet drives up to 110 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Hydra-Stik 2500 kit?\u003c\/strong\u003e The HS-2500 kit includes a hydraulic helm pump, two 20 foot hydraulic hoses with fittings, a universal hydraulic cylinder, an installation package with woodruff key and shaft nut, a bezel, the Hydra-Stik lever, one liter of Hydra-Glide Hydraulic Fluid, and an installation manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Hydra-Stik 2500 include hydraulic fluid?\u003c\/strong\u003e Yes, one liter of Hydra-Glide Hydraulic Fluid is included with the HS-2500 kit, so no separate fluid purchase is needed for initial setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is stick steering different from a standard wheel with the Hydra-Stik 2500?\u003c\/strong\u003e The HS-2500 uses a lever-style stick rather than a wheel, but adds hydraulic assistance for smoother steering with no feedback compared to a purely mechanical steering stick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the hydraulic hoses on the HS-2500?\u003c\/strong\u003e The kit includes two 20 foot hydraulic hoses with fittings for connecting the helm pump to the universal hydraulic cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Ezy-Glide Hydra-Stik 2500 weigh?\u003c\/strong\u003e The complete HS-2500 system weighs 23.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a shaft nut and key included for installing the Hydra-Stik 2500?\u003c\/strong\u003e Yes, the installation package included with the HS-2500 contains a woodruff key and shaft nut needed for setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with the installation of the Hydra-Stik 2500?\u003c\/strong\u003e The HS-2500 includes a full installation manual along with all hydraulic and mounting hardware needed to complete the setup, including the bezel and lever.\u003c\/p\u003e","brand":"Ezy-Glide","offers":[{"title":"Default Title","offer_id":49027989471451,"sku":"EZG-HS-2500","price":1111.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/HS-2500__09565.1739462872.500.750.jpg?v=1785163903"},{"product_id":"seastar-hc4645-3-baystar-outboard-hydraulic-steering-cylinder-up-to-150hp","title":"SeaStar HC4645-3 BayStar Outboard Hydraulic Steering Cylinder, Up to 150HP","description":"\u003cp\u003eThe SeaStar HC4645-3 BayStar Outboard Cylinder is a compact hydraulic steering cylinder built to upgrade an outboard steering system from mechanical to hydraulic control. Its compact form is designed for smaller outboards up to 150HP and is sized to fit most splashwells, making it a straightforward upgrade path for boats currently running mechanical steering. The cylinder features a precision-manufactured, balanced design and is built under rigid ISO quality control standards for consistent performance. Installation is designed to be easy, letting owners move to hydraulic steering without extensive modification to the transom or splashwell area. With an 8 inch actuation stroke length, a maximum pressure rating of 1000 psi, and a fluid displacement of 7.25 cubic inches, the HC4645-3 is engineered to deliver smooth, controlled steering response at the helm. The cylinder uses a 0.63 inch shaft diameter and is rated for use with SeaStar Steering Fluid. Overall dimensions are 4.60 inches in height, 5.19 inches in depth, and 21 inches in width, with a total weight of 7.06 pounds. This cylinder is intended for outboard applications rated up to 150HP where a compact, splashwell-mounted hydraulic cylinder is required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HC4645-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower Rating:\u003c\/strong\u003e 150 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuation Stroke Length:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pressure Rating:\u003c\/strong\u003e 1000 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluid Displacement:\u003c\/strong\u003e 7.25 cubic inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Diameter:\u003c\/strong\u003e 0.63 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllowable Fluid Type:\u003c\/strong\u003e SeaStar Steering Fluid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 4.60 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 5.19 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 21 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957932013\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOutboards up to 150 HP\u003c\/li\u003e\n\u003cli\u003eFits most splashwells\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SeaStar HC4645-3 do?\u003c\/strong\u003e The SeaStar HC4645-3 BayStar Outboard Cylinder is a hydraulic steering cylinder that lets you upgrade an outboard steering system from mechanical to hydraulic control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the HC4645-3 fit my outboard?\u003c\/strong\u003e This cylinder has a compact design made for smaller outboards up to 150HP and is sized to fit most splashwells.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum pressure rating of this cylinder?\u003c\/strong\u003e The HC4645-3 BayStar Outboard Cylinder has a maximum pressure rating of 1000 psi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the actuation stroke?\u003c\/strong\u003e The HC4645-3 has an actuation stroke length of 8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hydraulic fluid should be used with this cylinder?\u003c\/strong\u003e The SeaStar HC4645-3 is rated for use with SeaStar Steering Fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the HC4645-3 cylinder?\u003c\/strong\u003e The HC4645-3 measures 4.60 inches in height, 5.19 inches in depth, and 21 inches in width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HC4645-3 weigh?\u003c\/strong\u003e The SeaStar HC4645-3 BayStar Outboard Cylinder weighs 7.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the shaft diameter on this cylinder?\u003c\/strong\u003e The HC4645-3 has a shaft diameter of 0.63 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SeaStar HC4645-3 easy to install?\u003c\/strong\u003e Yes, the HC4645-3 BayStar Outboard Cylinder is designed to be easy to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fluid displacement of the HC4645-3?\u003c\/strong\u003e The HC4645-3 has a fluid displacement of 7.25 cubic inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HC4645-3 quality controlled?\u003c\/strong\u003e The HC4645-3 is built under rigid ISO quality control with precision manufacturing for a balanced cylinder.\u003c\/p\u003e","brand":"SeaStar Solutions","offers":[{"title":"Default Title","offer_id":49028231594203,"sku":"TEL-HC4645-3","price":616.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/TEL-HC4645-3__42147.1722517940.500.750.jpg?v=1785165422"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/TEL-HC4645-3__42147.1722517940.500.750.jpg?v=1785356965","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-steering-systems-hydraulic-steering-hydraulic-steering-helms-cylinders.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}