{"title":"Hydraulic Steering Hoses, Fittings \u0026 Kits","description":null,"products":[{"product_id":"seastar-hf5540-45-degree-hydraulic-steering-fitting-kit-stainless-steel-npt-thread-for-helm-pumps","title":"SeaStar 45 Degree Hydraulic Steering Fitting, HF5540, Stainless Steel","description":"\u003cp\u003eThe SeaStar HF5540 is a 45 degree hydraulic steering fitting built for boats running SeaStar hydraulic steering systems. It is machined from stainless steel with an NPT thread connection, giving a corrosion-resistant connector for joining steering hose or tubing runs at a 45 degree angle where a straight fitting will not route cleanly through the helm, cylinder, or bulkhead. Hydraulic steering systems depend on tight, leak-free connections to keep the system bled and responsive, and a fitting with the correct angle and thread lets the hose or tube run without kinking or placing stress on the connection point.\u003c\/p\u003e\u003cp\u003eThis fitting is intended for use with SeaStar 2-line hydraulic steering systems, including systems set up with 3\/8 inch diameter tubing or hose runs to the helm pump and cylinder. It is sold as a single fitting (Manufacturer Part Number HF5540) so it can be added or replaced individually without buying a full hose or tube kit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HF5540\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Steering Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Angle:\u003c\/strong\u003e 45 Degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.5 x 5 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957881632\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eIntended for SeaStar 2-line hydraulic steering systems using 3\/8 inch diameter tubing or hose runs, including systems built around the HC5332 cylinder.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat angle is the HF5540 fitting?\u003c\/strong\u003e The HF5540 is a 45 degree fitting, used where a hydraulic steering hose or tube run needs to change direction without a sharp bend or a straight connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SeaStar HF5540 made of?\u003c\/strong\u003e It is made of stainless steel, chosen for corrosion resistance in a marine hydraulic steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type does the HF5540 use?\u003c\/strong\u003e It uses an NPT thread connection for joining to hydraulic steering hose or tube fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size tubing does this fitting work with?\u003c\/strong\u003e The HF5540 is intended for use in SeaStar 2-line hydraulic steering systems built with 3\/8 inch diameter tubing or hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HF5540 fit SeaStar 2.4 systems and the HC5332 cylinder?\u003c\/strong\u003e Yes, SeaStar 2.4 hydraulic steering systems and systems using the HC5332 cylinder are among the applications this fitting size and type is used on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the HF5540?\u003c\/strong\u003e The HF5540 measures 0.5 x 5 x 8 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HF5540 weigh?\u003c\/strong\u003e This fitting weighs 0.16 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HF5540 sold as a single fitting or as part of a kit?\u003c\/strong\u003e It is sold as a single 45 degree fitting, Manufacturer Part Number HF5540, so it can be purchased on its own rather than as part of a full hose or tube kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine SeaStar part?\u003c\/strong\u003e Yes, the HF5540 is a genuine SeaStar branded hydraulic steering fitting, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the HF5540 fitting?\u003c\/strong\u003e The HF5540 is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HF5540 be used to replace a damaged or leaking fitting in an existing SeaStar steering system?\u003c\/strong\u003e Yes, because it is sold individually, the HF5540 can be used to replace a single damaged or leaking 45 degree fitting in a SeaStar 2-line hydraulic steering setup without replacing the entire hose or tube run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the HF5540?\u003c\/strong\u003e You receive one SeaStar HF5540 45 degree stainless steel fitting.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348200667,"sku":"TEL-HF5540","price":24.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/tel-hf5540__18073.1558181097.500.750.jpg?v=1785188001"},{"product_id":"seastar-hf6004-orb-fitting-kit-90-degree-elbow-stainless-steel-hydraulic-steering-fittings-2-piece","title":"SeaStar ORB Fitting Kit, 90 Degree Elbow, Stainless Steel, HF6004","description":"\u003cp\u003eThe SeaStar HF6004 ORB Fitting Kit provides the 90 degree elbow fittings used to complete hydraulic steering system connections. Each kit includes 2 pieces of O-ring boss (ORB) fittings machined from stainless steel with a silver stainless steel exterior finish for corrosion resistance in the marine environment. The fittings use a 0.375 inch NPT thread and are configured as a 90 degree elbow connector, allowing hydraulic steering hoses to be routed around tight engine bay or helm installations without kinking. This is a universal fit kit, making it suitable across SeaStar hydraulic steering setups that call for this fitting size and thread type. The kit measures 8 x 4 x 8 inches and weighs 0.24 pounds, and is backed by a limited manufacturer warranty. Boat owners and installers use this kit when building out or servicing a hydraulic steering line, replacing a damaged or leaking elbow fitting, or adding a fitting connection point during a steering system installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HF6004\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e ORB Fitting Kit, 90 Deg. Elbow, SS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet Name:\u003c\/strong\u003e ORB Fitting Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 8 x 4 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.24 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957911681\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SeaStar HF6004 ORB Fitting Kit?\u003c\/strong\u003e The HF6004 kit includes 2 pieces of 90 degree elbow ORB (O-ring boss) fittings machined from stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size and type does the HF6004 fitting use?\u003c\/strong\u003e The HF6004 fitting uses a 0.375 inch NPT thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle is the HF6004 fitting?\u003c\/strong\u003e It is a 90 degree elbow connector, used to route hydraulic steering hose around tight spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the HF6004 ORB Fitting Kit made from?\u003c\/strong\u003e SeaStar HF6004 fittings are made from stainless steel with a silver stainless steel exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HF6004 fitting kit weigh?\u003c\/strong\u003e The kit weighs 0.24 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the HF6004 kit?\u003c\/strong\u003e Item dimensions for the HF6004 kit are 8 x 4 x 8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HF6004 fit a specific boat or engine model?\u003c\/strong\u003e HF6004 is listed as a universal fit fitting kit rather than being tied to a specific make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the SeaStar HF6004 manufactured?\u003c\/strong\u003e The HF6004 ORB Fitting Kit has a country of origin of Canada.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HF6004 fitting kit covered by a warranty?\u003c\/strong\u003e Yes, HF6004 is backed by a limited manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in one HF6004 kit?\u003c\/strong\u003e One HF6004 kit contains 2 fitting pieces.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348266203,"sku":"TEL-HF6004","price":47.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/TEL-HF6004__53850.1729630690.500.750.jpg?v=1785188211"},{"product_id":"seastar-hf6007-orb-fitting-kit-for-manual-hydraulic-steering-add-second-helm-outboard-with-5-orb-straight-and-tee-fittings","title":"SeaStar HF6007 Add-A-Station\/Autopilot Fitting Kit, 3\/8 Inch ORB Compression Fittings","description":"\u003cp\u003eThe SeaStar HF6007 Add-A-Station\/Autopilot Fitting Kit supplies the compression fittings needed to add a second helm station or an autopilot connection to a SeaStar manual hydraulic steering system. All SeaStar manual hydraulic steering systems use the same style of fitting across applications, so this kit uses the same 3\/8 inch compression fitting design with a 9\/16-24 extra fine thread and a -5 ORB (O-ring boss) connection found throughout the SeaStar hydraulic line.\u003c\/p\u003e\u003cp\u003eThe kit contains two straight fittings (3\/8 inch tube, -5 ORB) and two tee fittings (2 x 3\/8 inch tube, -5 ORB), giving an installer the parts needed to branch an existing hydraulic steering line to a new station or autopilot pump without replacing the whole hose run. Fitting bodies are black plastic. Because the fitting style is common across the SeaStar manual hydraulic steering line, this kit is intended for use with SeaStar manual hydraulic steering systems generally rather than one specific helm or cylinder model.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HF6007\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Type:\u003c\/strong\u003e Add-A-Station\/Autopilot Fitting Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Style:\u003c\/strong\u003e ORB (O-ring boss), -5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Size:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 9\/16-24 extra fine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e 2 Straight Fittings (3\/8 inch tube, -5 ORB), 2 Tee Fittings (2 x 3\/8 inch tube, -5 ORB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957919090\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits SeaStar manual hydraulic steering systems, which use the same style of fitting across applications.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SeaStar HF6007 Add-A-Station\/Autopilot Fitting Kit include?\u003c\/strong\u003e The kit includes two straight fittings (3\/8 inch tube, -5 ORB) and two tee fittings (2 x 3\/8 inch tube, -5 ORB), the fittings needed to branch a SeaStar hydraulic steering line for a second station or autopilot connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread and tube size do the HF6007 fittings use?\u003c\/strong\u003e They use a 3\/8 inch compression tube fitting with a 9\/16-24 extra fine thread and a -5 ORB (O-ring boss) connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fitting kit work with any SeaStar manual hydraulic steering system?\u003c\/strong\u003e Yes. SeaStar manual hydraulic steering systems all use the same style of fitting across applications, so the HF6007 fitting kit is compatible with SeaStar manual hydraulic steering lines generally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the HF6007 fittings made from?\u003c\/strong\u003e The fitting bodies in the SeaStar HF6007 kit are black plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HF6007 kit used to add a second helm station or an autopilot?\u003c\/strong\u003e Both. The SeaStar HF6007 is labeled as an Add-A-Station\/Autopilot Fitting Kit, meaning it supplies the fittings for tapping into an existing hydraulic steering line to add either a second helm station or an autopilot pump connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fittings come in the HF6007 kit, and what type is each?\u003c\/strong\u003e There are four fittings total: two straight fittings (3\/8 inch tube, -5 ORB) and two tee fittings (2 x 3\/8 inch tube, -5 ORB).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HF6007 kit include hydraulic hose?\u003c\/strong\u003e No hose length is specified for the HF6007 kit; it supplies the straight and tee compression fittings only, for connecting into an existing SeaStar hydraulic steering line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the SeaStar HF6007 fitting kit?\u003c\/strong\u003e The SeaStar HF6007 Add-A-Station\/Autopilot Fitting Kit weighs 2.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a tee fitting or a straight fitting used to branch off an existing hydraulic line?\u003c\/strong\u003e The tee fitting (part of the HF6007 kit, 2 x 3\/8 inch tube, -5 ORB) is used to branch a line to add a station or autopilot, while the straight fittings (3\/8 inch tube, -5 ORB) connect a single run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the fittings in the HF6007 kit?\u003c\/strong\u003e The fittings in the SeaStar HF6007 kit are black.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348364507,"sku":"TEL-HF6007","price":215.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/tel-hf6007_lg__39028.1558181209.500.750.jpg?v=1785188110"},{"product_id":"seastar-baystar-hydraulic-steering-kit-without-tube-hk4300-4-for-single-engine-outboard-boats","title":"SeaStar BayStar HK4300-4 Hydraulic Steering Kit, No Tubing Included","description":"\u003cp\u003eThe SeaStar BayStar HK4300-4 is a hydraulic steering kit built for single-engine boats that need reliable, low-effort steering at the helm. As part of the BayStar line, it is designed for single-station applications and is not intended for high-speed, high-performance boats such as bass boats. This kit is supplied without hydraulic tubing, which lets you size and order tubing to match your boat's specific helm-to-cylinder run rather than paying for tubing you may not use.\u003c\/p\u003e\u003cp\u003eConstruction is all-metal for durability in the marine environment, and the kit is built to deliver smooth, efficient steering feel without the drag and play common in worn mechanical cable systems. Because it ships without tubing, installation requires sourcing SeaStar-compatible hydraulic tubing separately in the correct length for your vessel before the system can be filled and bled.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HK4300-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e BayStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Hydraulic Steering Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTubing Included:\u003c\/strong\u003e No, tubing sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Boat Steering Helm Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Configuration:\u003c\/strong\u003e Single engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Type Suitability:\u003c\/strong\u003e Not intended for high-speed, high-performance boats such as bass boats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7315091536141\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the HK4300-4 hydraulic steering kit include tubing?\u003c\/strong\u003e No, the SeaStar BayStar HK4300-4 is sold without hydraulic tubing, so tubing must be ordered separately to match your boat's helm-to-cylinder run length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HK4300-4 kit suitable for a bass boat?\u003c\/strong\u003e No. The BayStar system that the HK4300-4 belongs to is not intended for high-speed, high-performance boats such as bass boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many engines does the HK4300-4 steering kit support?\u003c\/strong\u003e The HK4300-4 is designed for single-engine boat applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HK4300-4 steering kit weigh?\u003c\/strong\u003e The SeaStar BayStar HK4300-4 hydraulic steering kit weighs 20 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the HK4300-4 made of?\u003c\/strong\u003e The HK4300-4 kit uses all-metal construction for the helm and cylinder components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HK4300-4 be used with a single helm station?\u003c\/strong\u003e Yes, the HK4300-4 is a BayStar kit configured for single-station helm setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the HK4300-4 and a BayStar kit that includes tubing?\u003c\/strong\u003e The HK4300-4 ships without hydraulic tubing, requiring the buyer to source tubing separately, whereas a tube-included kit provides pre-set tubing lengths in the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HK4300-4 a genuine SeaStar part?\u003c\/strong\u003e Yes, HK4300-4 is the genuine SeaStar manufacturer part number for this BayStar hydraulic steering kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the HK4300-4 kit?\u003c\/strong\u003e The HK4300-4 kit includes the BayStar hydraulic helm and cylinder components but does not include hydraulic tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the HK4300-4 work on a high-performance boat?\u003c\/strong\u003e No, the BayStar system used in the HK4300-4 is not intended for high-speed, high-performance boats such as bass boats.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348954331,"sku":"TEL-HK4300-4","price":888.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SeaStar-BayStar-HK4300-4-Hydraulic-Steering-Kit-without-Hydraulic-Hoses__52248.1752266406.500.750.jpg?v=1785189062"},{"product_id":"seastar-hk6400-4-hydraulic-outboard-steering-kit-without-hoses-single-or-dual-engines-up-to-350-hp","title":"SeaStar HK6400-4 Hydraulic Outboard Steering Kit, Single Engine, No Hose","description":"\u003cp\u003eThe SeaStar HK6400-4 is a hydraulic steering kit built for single outboard powered boats, sold without hoses so it can be paired with hose lengths and fittings sized to your specific helm layout. It is constructed of metal components designed to deliver the smooth, low-effort steering feel that hydraulic systems are known for, replacing cable steering on runabouts, center console boats, cruisers, and similar single-outboard applications. The kit is intended for boats that are not driven aggressively and do not exceed 75 mph, making it a good fit for typical recreational and light offshore use rather than high-performance racing setups.\u003c\/p\u003e\u003cp\u003eBecause the HK6400-4 ships without hoses, installers supply hose runs cut to the length needed to reach from the helm pump to the outboard cylinder, along with the fittings required to complete the connection. This lets a single kit serve boats of different lengths without forcing a fixed hose length on the buyer. As a genuine SeaStar part, the HK6400-4 is identified by its own part number so it can be matched precisely against a boat's existing SeaStar hydraulic steering components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HK6400-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Steering Kit (Without Hoses)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Single outboard powered boats, non-aggressive driving, up to 75 mph\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 100% Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA or Imported\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 22.4 x 14.2 x 5.2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 21.79 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7315091536165\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HK6400-4 steering kit used for?\u003c\/strong\u003e It is a hydraulic steering kit for single outboard powered boats, designed for non-aggressive driving at speeds up to 75 mph.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HK6400-4 kit come with hoses?\u003c\/strong\u003e No, the SeaStar HK6400-4 is sold without hoses, so hose length and fittings are selected separately to match the boat's helm-to-engine distance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the HK6400-4 steering kit made from?\u003c\/strong\u003e The kit is built from 100% metal components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar HK6400-4 weigh?\u003c\/strong\u003e The HK6400-4 steering kit weighs 21.79 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the HK6400-4?\u003c\/strong\u003e It ships in packaging measuring 22.4 x 14.2 x 5.2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HK6400-4 designed for single or dual outboard setups?\u003c\/strong\u003e The HK6400-4 is intended for single outboard powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat top speed is the HK6400-4 rated for?\u003c\/strong\u003e It is rated for boats that are not driven aggressively and do not exceed 75 mph.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the SeaStar HK6400-4 manufactured?\u003c\/strong\u003e The HK6400-4 is made in the USA or imported.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HK6400-4 a genuine SeaStar part?\u003c\/strong\u003e Yes, the HK6400-4 is a genuine SeaStar hydraulic steering kit identified by its own manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is listed for the SeaStar HK6400-4?\u003c\/strong\u003e The UPC for the HK6400-4 steering kit is 7315091536165.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349249243,"sku":"TEL-HK6400-4","price":1562.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/11__85036.1762438436.500.750.png?v=1785188493"},{"product_id":"dometic-seastar-ho5114-outboard-hydraulic-steering-hose-kit-2-x-14-ft-with-pre-attached-fittings","title":"SeaStar Outboard Hydraulic Steering Hose Kit HO5114, 14 ft, Set of 2 Hoses (OEM TELHO5114)","description":"\u003cp\u003eThe SeaStar HO5114 is a standard-length outboard hydraulic steering hose kit containing two hoses of equal length for connecting a SeaStar helm to the steering cylinder on outboard-powered boats. Each hose measures 14 feet and comes with hose fittings pre-attached on both ends, so the kit is ready to route and connect without additional fitting assembly. The hoses are supplied to a fixed standard length and cannot be cut to length; SeaStar outboard hose kits are ordered by part number, where the last two digits of the part number indicate the hose length in feet, so HO5114 corresponds to the 14-foot length. The kit has a polished exterior finish.\u003c\/p\u003e\u003cp\u003eHO5114 is intended for use with SeaStar hydraulic steering systems, with the exception of SeaStar PRO, BayStar, Capilano, and 3-line inboard systems, which use different hose or line configurations. For installations that call for a rigid line instead of flexible hose, a 3\/8 inch diameter copper tube and hose kit is available as a separate part.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO5114\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 14 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 hoses per kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose End Fittings:\u003c\/strong\u003e Pre-attached on both ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut to Length:\u003c\/strong\u003e Not cuttable; supplied at fixed standard length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.94 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 16 x 16 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957804914\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e TELHO5114\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All SeaStar hydraulic steering systems except SeaStar PRO, BayStar, Capilano, and 3-line inboard systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eCompatible with all SeaStar hydraulic steering systems, except SeaStar PRO, BayStar, Capilano, and 3-line inboard systems.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTELHO5114\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat length are the hoses in the SeaStar HO5114 kit?\u003c\/strong\u003e Each hose in the HO5114 kit measures 14 feet, and the kit contains two hoses of that equal length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hoses come in the HO5114 kit?\u003c\/strong\u003e The HO5114 kit contains two hoses of equal length, both fitted for use in a SeaStar outboard hydraulic steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the hose ends already fitted on HO5114?\u003c\/strong\u003e Yes, both hoses in the HO5114 kit come with hose fittings pre-attached on both ends, so no separate end-fitting assembly is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO5114 hoses be cut to a shorter length?\u003c\/strong\u003e No, HO5114 hoses are supplied at a fixed standard length of 14 feet and cannot be cut to length; a different part number must be ordered for a different length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know which SeaStar hose part number to order?\u003c\/strong\u003e SeaStar outboard hose kits are numbered so the last two digits indicate the hose length in feet; HO5114 is the 14-foot kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HO5114 compatible with SeaStar PRO steering systems?\u003c\/strong\u003e No, HO5114 is not for use with SeaStar PRO systems. It is compatible with standard SeaStar hydraulic steering systems, excluding SeaStar PRO, BayStar, Capilano, and 3-line inboard systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the OEM cross-reference number for the SeaStar HO5114 hose kit?\u003c\/strong\u003e The OEM cross-reference number for the SeaStar HO5114 hose kit is TELHO5114.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HO5114 hose kit weigh?\u003c\/strong\u003e The HO5114 hose kit weighs 2.94 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the HO5114 hose kit?\u003c\/strong\u003e The HO5114 hose kit is packaged in a box measuring 16 x 16 x 8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the HO5114 hose have?\u003c\/strong\u003e The HO5114 hose kit has a polished exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an alternative to the flexible hose kit for HO5114 applications?\u003c\/strong\u003e Yes, a 3\/8 inch diameter copper tube and hose kit is available as a separate part for installations that call for rigid line instead of the flexible HO5114 hoses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill HO5114 work with a BayStar steering system?\u003c\/strong\u003e No, HO5114 is not compatible with BayStar systems; it is intended for standard SeaStar hydraulic steering systems only.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349347547,"sku":"TEL-HO5114","price":159.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51aS0Y39WlL.jpg?v=1784477129"},{"product_id":"seastar-ho5116-outboard-hydraulic-steering-hose-kit-2-x-16-ft-4-9-m-with-pre-attached-fittings","title":"SeaStar Outboard Hydraulic Steering Hose Kit, HO5116, 16 Feet (Set of 2)","description":"\u003cp\u003eThe SeaStar HO5116 is a standard-length outboard hydraulic steering hose kit containing two hoses of equal length, 16 feet each, for use with SeaStar hydraulic steering systems on single-engine outboard boats. Both hoses come with hose fittings pre-attached on both ends, so the kit is ready to connect from the helm to the cylinder without additional fitting assembly. These hoses are supplied at a standard length and cannot be cut to length; SeaStar outboard hose kits follow a part numbering convention where the last two digits of the part number indicate the hose length in feet, so HO5116 denotes a 16 foot kit.\u003c\/p\u003e\u003cp\u003eThis hose kit is intended for connecting a SeaStar hydraulic helm to the steering cylinder on single-engine outboard installations. It is compatible with SeaStar hydraulic steering systems generally, with the exception of SeaStar PRO, BayStar, Capilano, and 3-line inboard systems, which use different hose or hardware configurations. The hose exterior has a polished finish. As an alternative to a pre-made hose kit, SeaStar outboard systems can also be plumbed using 3\/8 inch diameter copper tube with a separate copper tube and hose kit, for installations where routing favors rigid tubing over flexible hose.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO5116\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 16 feet (each hose)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Hoses:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Fittings:\u003c\/strong\u003e Pre-attached on both ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 16 x 16 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.94 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957804945\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Number:\u003c\/strong\u003e TELHO5116\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSeaStar hydraulic steering systems (single-engine outboard applications)\u003c\/li\u003e\n\u003cli\u003eNot compatible with SeaStar PRO, BayStar, Capilano, or 3-line inboard steering systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTELHO5116\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SeaStar HO5116 hose kit include?\u003c\/strong\u003e The HO5116 kit includes two hydraulic steering hoses of equal length, 16 feet each, with hose fittings pre-attached on both ends of each hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO5116 hoses be cut to a shorter length?\u003c\/strong\u003e No, SeaStar outboard hose kits including the HO5116 are supplied as standard fixed lengths and cannot be cut to length; a different length kit must be ordered if 16 feet does not suit the installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know the HO5116 kit is 16 feet long?\u003c\/strong\u003e SeaStar outboard hose part numbers use the last two digits to indicate hose length in feet, so the HO5116 part number corresponds to 16 foot hoses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO5116 hose kit compatible with all SeaStar steering systems?\u003c\/strong\u003e The HO5116 hose kit works with SeaStar hydraulic steering systems generally, but it is not compatible with SeaStar PRO, BayStar, Capilano, or 3-line inboard systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the OEM equivalent number for the SeaStar HO5116?\u003c\/strong\u003e The SeaStar HO5116 hose kit corresponds to OEM part number TELHO5116.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HO5116 hose kit weigh?\u003c\/strong\u003e The HO5116 hose kit weighs 2.94 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the HO5116 hose kit as packaged?\u003c\/strong\u003e As packaged, the SeaStar HO5116 hose kit measures 16 x 16 x 6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the hoses in the HO5116 kit already have fittings attached?\u003c\/strong\u003e Yes, both hoses in the HO5116 kit come with hose fittings pre-attached on both ends, ready for connection at the helm and cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an alternative to using pre-made hoses for a SeaStar outboard system?\u003c\/strong\u003e Yes, instead of a hose kit like the HO5116, SeaStar outboard systems can be plumbed with 3\/8 inch diameter copper tube using a separate copper tube and hose kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the SeaStar HO5116 hose have?\u003c\/strong\u003e The SeaStar HO5116 hose has a polished exterior finish.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349445851,"sku":"TEL-HO5116","price":174.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51aS0Y39WlL_2239ab73-2b9c-46de-9d18-c68ee46ac766.jpg?v=1784477138"},{"product_id":"seastar-ho5118-outboard-hydraulic-steering-hose-kit-18-ft-standard-pair-1-000-psi-pre-attached-fittings","title":"SeaStar HO5118 Outboard Hydraulic Steering Hose Kit, 18 Feet, Sold in Pairs","description":"\u003cp\u003eThe SeaStar HO5118 is a standard-length hydraulic steering hose kit built for outboard steering systems, supplying the hose run between the helm and the outboard steering cylinder. Each hose measures 18 feet and comes with pre-attached fittings on both ends, so there is no separate fitting installation required at hookup. The kit is sold per pair, giving you both the pressure and return hoses needed for a complete single-hose-run connection. Hoses are rated to 1,000 psi, matching the operating pressure of hydraulic outboard steering systems, and are constructed of black synthetic rubber for resistance to marine fuel, oil, and weather exposure.\u003c\/p\u003e\u003cp\u003eThis hose kit is intended for use with Dometic hydraulic steering systems, with the exception of Dometic PRO, BayStar, Capilano, and 3-line inboard systems, which use different hose or fitting configurations. Because outboard hoses in this series are supplied in fixed standard lengths and cannot be field-cut, the correct part number must be selected for the required run length; the last two digits of the part number indicate the hose length in feet, so HO5118 is the 18-foot version. Installers needing a different length should select the corresponding part in the same series rather than shortening this hose kit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO5118\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 18 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold per pair (2 hoses)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Rating:\u003c\/strong\u003e 1000 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Synthetic Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Ends:\u003c\/strong\u003e Pre-attached fittings on both ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut to Length:\u003c\/strong\u003e No, standard fixed length only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All Dometic hydraulic steering systems except Dometic PRO, BayStar, Capilano, and 3-line inboard systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957804969\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for single-engine outboard hydraulic steering installations using Dometic-compatible systems (excluding Dometic PRO, BayStar, Capilano, and 3-line inboard systems).\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the SeaStar HO5118 hose kit?\u003c\/strong\u003e Each hose in the HO5118 kit is 18 feet long, indicated by the last two digits of the part number, which denote hose length in feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO5118 come with one hose or two?\u003c\/strong\u003e The HO5118 is sold per pair, giving you two 18-foot hoses for a complete pressure and return hose run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO5118 hose be cut to a shorter length?\u003c\/strong\u003e No. HO5118 is a standard fixed-length hose and cannot be cut to length; a different standard length part number must be ordered if a shorter or longer run is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pressure rating of the HO5118 steering hose?\u003c\/strong\u003e The SeaStar HO5118 hose kit is rated to 1,000 psi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the HO5118 hose made from?\u003c\/strong\u003e The HO5118 hose kit is made of black synthetic rubber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the HO5118 hoses come with fittings already installed?\u003c\/strong\u003e Yes, the HO5118 hoses come with fittings pre-attached on both ends, ready for connection at the helm and steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SeaStar HO5118 compatible with BayStar steering systems?\u003c\/strong\u003e No. The HO5118 hose kit is compatible with Dometic hydraulic steering systems but is not for use with Dometic PRO, BayStar, Capilano, or 3-line inboard systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HO5118 hose kit weigh?\u003c\/strong\u003e The HO5118 hose kit weighs 3.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar HO5118?\u003c\/strong\u003e The SeaStar HO5118 outboard steering hose kit has UPC 731957804969.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an alternative to the HO5118 hose for connecting the steering cylinder to the engine?\u003c\/strong\u003e Yes, a 3\/8 inch diameter copper tube and hose kit is available as an alternative connection option for single-engine outboard steering setups, though it is a separate part from the HO5118 hose kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO5118 for single-engine or dual-engine outboard setups?\u003c\/strong\u003e The HO5118 hose kit is used in single-engine outboard steering installations.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349576923,"sku":"TEL-HO5118","price":187.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41Cy7VWPX_L.jpg?v=1784477149"},{"product_id":"seastar-ho5126-standard-outboard-hydraulic-steering-hose-kit-2-x-26-ft-for-baystar-and-seastar-systems","title":"SeaStar HO5126 Outboard Hydraulic Steering Hose Kit, Standard, 26 Feet (2 Hoses)","description":"\u003cp\u003eThe SeaStar HO5126 is a standard-duty outboard hydraulic steering hose kit built for connecting a SeaStar hydraulic helm pump to an outboard steering cylinder. It is supplied as a fixed-length kit of two 26 foot hoses and, like all hoses in the HO51xx standard line, is sold in preset lengths only -- it cannot be cut to length in the field, so the correct length must be selected at time of order. The two-hose configuration matches the pressure and return line requirement of a single-engine outboard hydraulic steering installation, running from the helm at the console back to the steering cylinder connection at the engine.\u003c\/p\u003e\u003cp\u003eThis is the standard hose option within SeaStar's outboard hose lineup (identified by the HO51xx part number series), as distinct from the Xtreme-duty HO57xx series. For installations that use rigid tubing instead of flexible hose for part of the run, SeaStar also offers a copper tube and hose kit as an alternate routing option. The HO5126 kit weighs 4.14 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO5126\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard hydraulic steering hose kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 26 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 hoses per kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Series:\u003c\/strong\u003e HO51xx Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut to Length:\u003c\/strong\u003e No, fixed standard length only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Single engine outboard hydraulic steering, helm-to-cylinder connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957805003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Hydraulic Boat Steering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits SeaStar outboard hydraulic steering systems on single engine applications, connecting the helm pump to the outboard steering cylinder. For dual engine setups, a tie bar from SeaStar or the engine manufacturer is required in addition to the hose run. A specific make, horsepower, or year range for this hose is not specified by SeaStar.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the SeaStar HO5126 hose kit?\u003c\/strong\u003e The HO5126 kit includes two hoses that are 26 feet in length each, matching the last two digits of the part number (26) to the length in feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO5126 hose be cut to a shorter length?\u003c\/strong\u003e No. SeaStar outboard hoses in the HO51xx series, including the HO5126, are sold in fixed standard lengths and cannot be cut to length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hoses come in the HO5126 kit?\u003c\/strong\u003e The kit contains two 26 foot hoses, providing the pressure and return line pair needed for a single-engine outboard hydraulic steering connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the HO51xx and HO57xx hose series?\u003c\/strong\u003e The HO51xx series, which includes the HO5126, is SeaStar's standard-duty outboard hose line, while the HO57xx series is the Xtreme-duty alternative.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the HO5126 hose connect to?\u003c\/strong\u003e This hose kit runs from the SeaStar hydraulic helm pump to the outboard steering cylinder in a single engine hydraulic steering setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO5126 work for dual engine installations?\u003c\/strong\u003e The HO5126 hose is used in outboard hydraulic steering runs, but dual engine setups also require a tie bar from SeaStar or the engine manufacturer in addition to the hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HO5126 hose kit weigh?\u003c\/strong\u003e The SeaStar HO5126 hose kit weighs 4.14 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an alternative to hose for the steering line?\u003c\/strong\u003e Yes, SeaStar offers a 3\/8 inch copper tube and hose kit as an alternate option to flexible hose for the steering line run, in place of the HO51xx\/HO57xx hose series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO5126 a genuine SeaStar part?\u003c\/strong\u003e Yes, HO5126 is SeaStar's own part number for this standard 26 foot outboard hydraulic steering hose kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length options are available besides 26 feet?\u003c\/strong\u003e SeaStar's outboard hose line uses the last two digits of the part number to indicate length in feet, so other standard lengths are available under different HO51xx\/HO57xx part numbers; the HO5126 specifically is the 26 foot standard hose.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349707995,"sku":"TEL-HO5126","price":285.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_edfc1f31-1471-4303-a850-91701996cd31.jpg?v=1785348990"},{"product_id":"seastar-ho5124-outboard-hydraulic-steering-hose-kit-two-24-ft-pre-fitted-hoses-for-seastar-steering-systems","title":"SeaStar Outboard Hydraulic Steering Hose Kit HO5124, 24 Feet, Set of 2 Hoses","description":"\u003cp\u003eThe SeaStar HO5124 is a 24 foot outboard hydraulic steering hose kit built as a standard-length replacement or extension set for SeaStar hydraulic outboard steering systems. The kit contains two hoses of equal length, each supplied with hose fittings pre-attached at both ends, so the hoses run directly from the helm pump to the steering cylinder without additional fitting assembly. The hoses are constructed of reinforced rubber or synthetic material in black and are supplied as a matched pair rather than as bulk hose, since SeaStar outboard hose is ordered in standard lengths and is not intended to be cut to length in the field.\u003c\/p\u003e\u003cp\u003eThis hose kit is compatible with SeaStar hydraulic steering systems generally, but it is not intended for use with SeaStar PRO helms, BayStar systems, Capilano systems, or 3-line inboard steering systems, so confirm your system type before ordering. For installations where hose routing needs to be built up from raw tubing instead of a fixed-length hose, SeaStar also offers a 3\/8 inch copper tube and hose kit as an alternative connection method, though that is a separate part from this pre-made hose kit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO5124\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 24 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 hoses of equal length, per kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Reinforced rubber or synthetic material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.99 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings:\u003c\/strong\u003e Pre-attached hose fittings on both ends of each hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957804990\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompatible with SeaStar hydraulic outboard steering systems\u003c\/li\u003e\n\u003cli\u003eNot for use with SeaStar PRO helms\u003c\/li\u003e\n\u003cli\u003eNot for use with BayStar systems\u003c\/li\u003e\n\u003cli\u003eNot for use with Capilano systems\u003c\/li\u003e\n\u003cli\u003eNot for use with 3-line inboard steering systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long are the hoses in the SeaStar HO5124 kit?\u003c\/strong\u003e Each hose in the HO5124 kit is 24 feet long, and the kit includes two hoses of that equal length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hoses come in the HO5124 kit?\u003c\/strong\u003e The HO5124 kit contains two hoses of equal length, both fitted with pre-attached hose fittings on each end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO5124 hoses be cut to a shorter length?\u003c\/strong\u003e No. SeaStar outboard hose of this type is ordered in standard lengths and is not intended to be cut to length; the HO5124 kit is fixed at 24 feet per hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the HO5124 hose kit made of?\u003c\/strong\u003e The hoses in the HO5124 kit are made of reinforced rubber or synthetic material and are black in color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar HO5124 hose kit weigh?\u003c\/strong\u003e The HO5124 hose kit weighs 3.99 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the HO5124 hose kit work with a SeaStar PRO helm?\u003c\/strong\u003e No. The HO5124 hose kit is not intended for use with SeaStar PRO helms; it is designed for standard SeaStar outboard steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO5124 kit compatible with BayStar or Capilano steering systems?\u003c\/strong\u003e No, the HO5124 hose kit is not compatible with BayStar systems or Capilano systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO5124 kit work with 3-line inboard steering systems?\u003c\/strong\u003e No. The HO5124 hose kit is not designed for 3-line inboard steering systems; it is intended for outboard hydraulic steering applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the hoses in the HO5124 kit already have fittings attached?\u003c\/strong\u003e Yes, each hose in the HO5124 kit comes with hose fittings pre-attached on both ends, ready to connect between the helm pump and steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an alternative to a fixed-length hose kit like the HO5124 for connecting the steering cylinder?\u003c\/strong\u003e Yes. SeaStar also offers a 3\/8 inch copper tube and hose kit as an alternative connection method for outboard steering systems, which is a separate part from the pre-made HO5124 hose kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the HO5124?\u003c\/strong\u003e The HO5124 kit includes two 24 foot hoses of equal length, each with hose fittings pre-attached on both ends.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349740763,"sku":"TEL-HO5124","price":240.06,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51aS0Y39WlL_f0b2c658-5946-4205-b942-725a0fcb062f.jpg?v=1784477181"},{"product_id":"seastar-ho7100-field-installed-bulkhead-kit-single-hose-pair-stainless-steel-hose-fitting","title":"SeaStar HO7100 Single Hose Bulkhead Kit, Stainless Steel, Pair","description":"\u003cp\u003eThe SeaStar HO7100 is a field-installable bulkhead kit designed to let boaters route a hose cleanly and safely through the hull. Sold as a pair, the kit is built for single hose applications and uses a split grommet design that fits directly onto an existing hose assembly, so there is no need to disconnect fittings or re-run the hose from scratch. A split pigtail with snap-fit tabs holds the assembly together with a positive, secure feel once installed correctly. Stainless steel cover plates give the fitting a clean, corrosion-resistant finish that blends with a boat's existing stainless trim, offering a cosmetic upgrade over standard bulkhead fittings while maintaining a safe, sealed hull penetration. Because the components are field installable, this kit works as a straightforward retrofit onto a standard hose kit already in place, making it a practical solution for boaters looking to tidy up hose routing without replacing the entire steering hose run. The pair configuration means two matching fittings are included, suited to installations that route a single hose through two points or that need a matched replacement set.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO7100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Bulkhead Kit, Single Hose, Pair, Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Configuration:\u003c\/strong\u003e Single hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair (2 fittings)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel cover plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Split grommet with split pigtail and snap-fit tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Field installable onto a standard hose kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 9 x 6 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957934642\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HO7100 bulkhead kit used for?\u003c\/strong\u003e The HO7100 is a bulkhead fitting kit that lets a single hose pass cleanly through a boat's hull, giving a finished, sealed look at the penetration point while keeping the hose routing tidy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO7100 come with one fitting or two?\u003c\/strong\u003e It is sold as a pair, so two matching stainless steel bulkhead fittings are included in the HO7100 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO7100 kit for a single hose or dual hose setup?\u003c\/strong\u003e This kit is the single hose version of SeaStar's bulkhead fittings, designed around one hose passing through each fitting rather than a dual-hose configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the HO7100 without removing my existing hose?\u003c\/strong\u003e Yes, the HO7100 uses a split grommet and split pigtail design with snap-fit tabs, so it can be field installed directly onto a standard hose assembly that is already in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the HO7100 cover plates made from?\u003c\/strong\u003e The cover plates on the HO7100 bulkhead kit are stainless steel, chosen for corrosion resistance and a finish that matches other stainless hardware on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HO7100 bulkhead kit weigh?\u003c\/strong\u003e The SeaStar HO7100 weighs 1 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the HO7100?\u003c\/strong\u003e The HO7100 ships in packaging measuring 9 x 6 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know the HO7100 is installed correctly?\u003c\/strong\u003e The snap-fit tabs on the split pigtail are designed to give a positive, noticeable feel when they are properly seated, which is the indicator that the HO7100 fitting is installed correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the HO7100 fittings match my boat's existing stainless trim?\u003c\/strong\u003e The stainless steel cover plates on the HO7100 are intended to blend in with a boat's existing stainless trim while providing a cosmetic upgrade over a plain bulkhead penetration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO7100 a genuine SeaStar part?\u003c\/strong\u003e Yes, HO7100 is the SeaStar manufacturer part number for this stainless steel single hose bulkhead kit, sold as a matched pair.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349839067,"sku":"TEL-HO7100","price":75.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/HO7100__92586.1722507344.500.750.jpg?v=1785189118"},{"product_id":"seastar-pro-ho5716-kevlar-reinforced-hydraulic-steering-hose-kit-2-x-16ft-for-seastar-outboard-steering-systems","title":"SeaStar HO5716 Pro Outboard Hydraulic Steering Hose Kit, Kevlar Reinforced, 16 Feet","description":"\u003cp\u003eThe SeaStar HO5716 is a Pro outboard hydraulic steering hose kit built for SeaStar PRO helm systems. Each kit includes two hoses of equal length, 16 feet each, for a combined 32 feet of hose. The hose uses a custom multi-layered composite nylon construction with Kevlar reinforcement for added strength, engineered to provide very low thermal expansion in the steering system. It is designed to exceed SAE and ABYC specifications and deliver precise steering control beyond what standard hydraulic industry hose can achieve, while remaining kink and abrasion resistant.\u003c\/p\u003e\u003cp\u003eEach hose comes with a factory swaged solid fitting connection featuring an O-ring seal backed by a metal-to-metal seal for a secure, leak-resistant joint. A bend restrictor is fitted on one end of each hose, which should be attached to the cylinder end to prevent kinking during installation. The hose is rated to a maximum pressure of 1500 pounds per square inch and is intended for use with SeaStar PRO (1500 psi) reinforced Kevlar hose systems only. The hose cannot be cut to length; it must be ordered in the correct pre-set length for the installation. SeaStar outboard hose part numbers follow a length code where the final two digits indicate the hose length in feet, so the HO5716 designation corresponds to 16-foot hoses.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO5716\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Two hoses, 16 feet each (32 feet total)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length (each):\u003c\/strong\u003e 16 feet (192 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon with Kevlar reinforcement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black, Blue, Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pressure:\u003c\/strong\u003e 1500 pounds per square inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Wall Thickness:\u003c\/strong\u003e 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (each hose):\u003c\/strong\u003e 192 inches long x 0.38 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Connection:\u003c\/strong\u003e Factory swaged solid fitting with O-ring seal and metal-to-metal backup seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Helm System:\u003c\/strong\u003e SeaStar PRO (1500 psi) reinforced Kevlar hose systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957805270\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long are the hoses in the HO5716 kit?\u003c\/strong\u003e Each hose in the SeaStar HO5716 kit is 16 feet long, and the kit includes two hoses of equal length for a combined 32 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO5716 hose be cut to a shorter length?\u003c\/strong\u003e No. SeaStar outboard hydraulic steering hose, including the HO5716, cannot be cut to length. Cutting the hose destroys it, since there is no way to field-swage new fittings onto the ends once cut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the HO5716 hose made from?\u003c\/strong\u003e The HO5716 is a custom multi-layered composite nylon hose with Kevlar reinforcement, engineered for strength and very low thermal expansion in hydraulic steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO5716 kit work with any SeaStar helm?\u003c\/strong\u003e SeaStar PRO helm systems require SeaStar PRO (1500 psi) reinforced Kevlar hoses only, and the HO5716 is rated to 1500 psi, matching that requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum pressure rating of the HO5716 hose?\u003c\/strong\u003e The HO5716 hose is rated to a maximum pressure of 1500 pounds per square inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hoses come in the HO5716 kit?\u003c\/strong\u003e The kit contains two hoses of equal length, 16 feet each, making up the full HO5716 hydraulic steering hose kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of fitting connection does the HO5716 hose use?\u003c\/strong\u003e Each HO5716 hose has a factory swaged solid fitting connection with an O-ring seal, backed by a metal-to-metal seal for added security.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich end of the HO5716 hose should be connected to the steering cylinder?\u003c\/strong\u003e Each hose in the HO5716 kit has a bend restrictor on one end to prevent kinking, and that end is meant to be attached to the steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO5716 hose resistant to kinking and abrasion?\u003c\/strong\u003e Yes, the HO5716 hydraulic steering hose is kink and abrasion resistant due to its multi-layered composite construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the last part of the HO5716 part number mean?\u003c\/strong\u003e SeaStar outboard hose part numbers use a length code where the final two digits indicate the hose length in feet, so HO5716 denotes a 16-foot hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO5716 kit suitable for dual engine installations?\u003c\/strong\u003e For dual engine setups, a SeaStar or engine manufacturer's tie bar is required in addition to the hose kit; the HO5716 hose itself is ordered per the length needed for the installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HO5716 hose kit weigh?\u003c\/strong\u003e The SeaStar HO5716 outboard hydraulic steering hose kit weighs 3.1 pounds.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349871835,"sku":"TEL-HO5716","price":324.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71-shwoJgcL.jpg?v=1784477186"},{"product_id":"seastar-ho5120-outboard-hydraulic-steering-hose-kit-2-x-20-ft-6-1-m-reinforced-rubber","title":"SeaStar Outboard Hose Kit HO5120, 2 x 20 Feet Hydraulic Steering Hoses","description":"\u003cp\u003eThe SeaStar HO5120 Outboard Hose Kit supplies the two hydraulic steering hoses needed to connect a SeaStar helm to an outboard steering cylinder. Each kit contains two hoses of equal length, 20 feet each, with fittings pre-attached at both ends so the hoses connect directly without additional flaring or fitting work. The hoses are made of reinforced rubber and are supplied in a fixed standard length; SeaStar outboard hoses are ordered by length and cannot be cut to length, which is why they are sold in defined size increments such as this 20 foot kit.\u003c\/p\u003e\u003cp\u003eThis hose kit is used for the single engine hydraulic hose run connecting the helm pump to the outboard steering cylinder. On a dual engine installation, a SeaStar or engine manufacturer's tie bar is also required in addition to the steering hoses. For engines equipped with factory power steering, note that not all SeaStar cylinders are suitable; consult your specific cylinder application before final installation. Buyers who prefer a rigid, non-rubber steering line for a permanent installation can instead use SeaStar's 3\/8 inch copper tube and hose kit as an alternative to this flexible rubber hose kit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO5120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 20 feet (each hose)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Hoses:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Reinforced Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black, Gold, Green, Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 16 x 16 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions (L x W x H):\u003c\/strong\u003e 14.88 x 14.33 x 4.02 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.58 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957804976\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings:\u003c\/strong\u003e Pre-attached hose fittings on both ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut to Length:\u003c\/strong\u003e No, supplied in fixed standard lengths only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All SeaStar systems except SeaStar PRO, BayStar, Capilano, and 3-line inboard systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eCompatible with SeaStar outboard hydraulic steering systems, for single engine hose runs (dual engine installations also require a tie bar). Not compatible with SeaStar PRO, BayStar, Capilano, or 3-line inboard systems.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SeaStar HO5120 hose kit include?\u003c\/strong\u003e The HO5120 kit includes two hydraulic steering hoses of equal length, 20 feet each, with fittings pre-attached at both ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO5120 hoses be cut to a shorter length?\u003c\/strong\u003e No. SeaStar outboard hoses like the HO5120 are ordered as standard fixed lengths and cannot be cut to length; if you need a different length, order the corresponding hose part number for that length instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length are the hoses in the HO5120 kit?\u003c\/strong\u003e Each of the two hoses in the HO5120 kit is 20 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO5120 hose kit compatible with SeaStar PRO systems?\u003c\/strong\u003e No. The HO5120 outboard hose kit is not for use with SeaStar PRO, BayStar, Capilano, or 3-line inboard systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the HO5120 hoses made of?\u003c\/strong\u003e The HO5120 hoses are made of reinforced rubber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HO5120 hose kit weigh?\u003c\/strong\u003e The SeaStar HO5120 hose kit weighs 3.58 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the hoses come with fittings already installed?\u003c\/strong\u003e Yes, both hoses in the HO5120 kit have fittings pre-attached on both ends, so no additional flaring or fitting work is required before connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an alternative to the rubber hose kit for a more permanent installation?\u003c\/strong\u003e Yes. SeaStar also offers a 3\/8 inch copper tube and hose kit as an alternative to the flexible rubber HO5120 hose kit for buyers who want a rigid steering line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO5120 kit be used on dual engine installations?\u003c\/strong\u003e The HO5120 hose kit provides the single engine steering hose run; for dual engine setups, a SeaStar or engine manufacturer's tie bar is also required in addition to the hose kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options does the HO5120 hose come in?\u003c\/strong\u003e The HO5120 hose kit is available in black, gold, green, or red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO5120 hose kit suitable for engines with factory power steering?\u003c\/strong\u003e Check your specific SeaStar cylinder before installing, since not every SeaStar steering cylinder is suitable for use on engines fitted with factory power steering.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349904603,"sku":"TEL-HO5120","price":203.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51aS0Y39WlL_d6c9a10b-29c4-4823-b3d3-b09e693419c9.jpg?v=1784477194"},{"product_id":"seastar-ho7105-field-installed-bulkhead-kit-single-hose-plastic-pair-for-marine-hydraulic-steering","title":"SeaStar HO7105 Field Installed Bulkhead Fitting Kit, Single Hose, Plastic, Pair","description":"\u003cp\u003eThe SeaStar HO7105 is a field installed bulkhead fitting kit designed for single hose hydraulic steering system installations. Sold as a pair, this plastic bulkhead kit allows a steering hose to pass through a bulkhead or transom while maintaining a secure, sealed connection at the point of entry. Field installed kits like this one are used when a hose needs to be routed through a boat's structure during system installation or when replacing worn or damaged bulkhead fittings on an existing SeaStar hydraulic steering setup.\u003c\/p\u003e\u003cp\u003eConstructed of plastic, the HO7105 kit is intended for single hose applications and comes as a matched pair of fittings, providing the components needed for a standard bulkhead pass-through on both sides of the mounting point. This kit is a practical choice for boat builders and owners performing new steering hose installations or servicing existing SeaStar hydraulic steering lines.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO7105\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Kit Field Installed Bulkhead, Single Hose, Pair Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Steering Parts \u0026amp; Accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Configuration:\u003c\/strong\u003e Single hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair (2 fittings)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Field installed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957934659\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HO7105 bulkhead fitting kit used for?\u003c\/strong\u003e The HO7105 is a field installed bulkhead fitting kit that lets a single hydraulic steering hose pass through a bulkhead or transom with a secure, sealed connection at the entry point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fittings come in the HO7105 kit?\u003c\/strong\u003e This kit includes a pair of plastic bulkhead fittings, providing matched components for both sides of the bulkhead pass-through.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the HO7105 bulkhead fitting made of?\u003c\/strong\u003e The HO7105 bulkhead fitting kit is made of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO7105 kit for single or dual hose steering systems?\u003c\/strong\u003e The HO7105 is configured for single hose hydraulic steering installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO7105 be installed after the boat is already built?\u003c\/strong\u003e Yes, the HO7105 is a field installed kit, meaning it is designed to be fitted during installation or retrofit work rather than only at the factory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the SeaStar HO7105 kit?\u003c\/strong\u003e The SeaStar HO7105 bulkhead fitting kit weighs 1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO7105 kit include mounting hardware?\u003c\/strong\u003e The HO7105 is supplied as a pair of plastic bulkhead fittings for the hose pass-through; check with the installation instructions for your specific steering system for any additional hardware needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar HO7105 kit?\u003c\/strong\u003e The UPC for the SeaStar HO7105 bulkhead fitting kit is 731957934659.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO7105 compatible with any hydraulic steering brand?\u003c\/strong\u003e The HO7105 is a SeaStar branded bulkhead fitting kit designed for use with SeaStar hydraulic steering hose installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need a bulkhead fitting kit like the HO7105?\u003c\/strong\u003e A bulkhead fitting kit such as the HO7105 is needed whenever a steering hose must pass through a bulkhead or transom wall, providing a clean, secure entry point rather than routing the hose through an unsealed hole.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350068443,"sku":"TEL-HO7105","price":36.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/HO7105__35422.1722484828.500.750.jpg?v=1785329140"},{"product_id":"seastar-ho7200-field-installed-bulkhead-kit-dual-hose-stainless-steel","title":"SeaStar HO7200 Dual Hose Bulkhead Fitting Kit, Field Installed, Stainless Steel","description":"\u003cp\u003eThe SeaStar HO7200 is a field-installed bulkhead fitting kit built for hydraulic steering hose installations that require a clean, sealed pass-through at a transom or bulkhead. The kit is configured for dual hose runs, allowing both hydraulic steering hoses to pass through a single bulkhead point with a secure, leak-resistant fit. Stainless steel construction provides corrosion resistance in the marine environment, standing up to saltwater exposure and repeated tightening without the rust or pitting that can affect lower-grade fittings.\u003c\/p\u003e\u003cp\u003eBecause this kit is field installed, it is intended to be fitted at the boat during the steering hose installation or upgrade, rather than pre-mounted at the factory. This makes it a practical option for rigging a new hydraulic steering system or replacing a worn or corroded bulkhead fitting on an existing setup. The dual-hose design keeps both steering lines organized and properly supported where they cross the bulkhead, reducing chafe and helping maintain a watertight seal.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO7200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Type:\u003c\/strong\u003e Field installed bulkhead fitting kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Configuration:\u003c\/strong\u003e Dual hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Hydraulic steering hose bulkhead pass-through\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HO7200 used for?\u003c\/strong\u003e It is a bulkhead fitting kit that lets two hydraulic steering hoses pass through a boat's transom or bulkhead at a single, sealed point, part number HO7200.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO7200 a dual hose or single hose kit?\u003c\/strong\u003e The HO7200 is configured as a dual hose bulkhead kit, meaning it accommodates both hydraulic steering hoses through one fitting point rather than needing two separate single-hose fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SeaStar HO7200 made from?\u003c\/strong\u003e Stainless steel is the material used for the HO7200 bulkhead fitting kit, chosen for its resistance to corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO7200 come pre-installed or do I fit it myself?\u003c\/strong\u003e The HO7200 is a field installed kit, meaning it is designed to be fitted during hose installation at the boat rather than arriving pre-mounted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar HO7200 weigh?\u003c\/strong\u003e The HO7200 bulkhead fitting kit weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO7200 be used when upgrading an existing hydraulic steering system?\u003c\/strong\u003e Yes, because it is field installed, the HO7200 can be fitted when rigging a new hydraulic steering system or when replacing an existing bulkhead fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use a bulkhead fitting kit instead of just running hoses through a plain hole?\u003c\/strong\u003e A bulkhead fitting kit like the HO7200 provides a sealed, supported pass-through for the hoses, reducing chafe at the bulkhead and helping keep the penetration watertight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SeaStar HO7200 suitable for saltwater use?\u003c\/strong\u003e The HO7200 is made of stainless steel, which is suited to withstand saltwater exposure without the rust or pitting that can affect lower-grade metal fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO7200 kit include fittings for both hoses in one unit?\u003c\/strong\u003e Yes, the dual hose design of the HO7200 is built to handle both hydraulic steering hoses through a single bulkhead fitting kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of steering part is the HO7200?\u003c\/strong\u003e The HO7200 is a steering parts and accessories item, specifically a bulkhead fitting kit for hydraulic steering hose runs.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350101211,"sku":"TEL-HO7200","price":69.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/HO7200__83464.1722352750.500.750.jpg?v=1785329140"},{"product_id":"seastar-ho7205-field-installed-bulkhead-kit-dual-hose-plastic-marine-steering-fitting","title":"SeaStar Dual Hose Bulkhead Fitting Kit, Field Installed, Plastic - HO7205","description":"\u003cp\u003eThe SeaStar HO7205 is a field installed bulkhead fitting kit built to pass a dual hose run through a boat's transom or bulkhead in a hydraulic steering installation. The kit is molded from plastic, making it lightweight and resistant to corrosion compared to metal bulkhead fittings, which is an important consideration in the wet, salt-exposed environment around a transom penetration. Because it is a field installed design, it is intended to be fitted during hose routing rather than pre-mounted at the factory, giving installers flexibility in where the dual hose pair exits the hull or console.\u003c\/p\u003e\u003cp\u003eThis bulkhead kit is designed for dual hose hydraulic steering lines, letting both hoses pass through a single, sealed bulkhead penetration instead of requiring two separate fittings. This keeps the installation neat and helps maintain a secure, sealed pass-through point. The SeaStar HO7205 is sold under the Steering Parts \u0026amp; Accessories category and is intended for use as part of a hydraulic steering hose installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO7205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Kit Field Installed Bulkhead, Dual Hose, Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Steering Parts \u0026amp; Accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Configuration:\u003c\/strong\u003e Dual hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Field installed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HO7205 used for?\u003c\/strong\u003e The HO7205 is a field installed bulkhead fitting kit that allows a dual hose hydraulic steering line to pass through a boat's transom or bulkhead through a single, sealed fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO7205 designed for one hose or two?\u003c\/strong\u003e This kit is built for dual hose applications, so both hydraulic steering hoses pass through the bulkhead using the same fitting kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SeaStar HO7205 bulkhead kit made from?\u003c\/strong\u003e It is made of plastic, which resists corrosion in the wet, salt-exposed environment typical of a transom or bulkhead penetration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO7205 come pre-installed on a boat?\u003c\/strong\u003e No, the HO7205 is a field installed kit, meaning it is fitted on site during hose routing rather than mounted at the factory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar HO7205 weigh?\u003c\/strong\u003e The HO7205 dual hose bulkhead kit weighs 1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is the SeaStar HO7205?\u003c\/strong\u003e The HO7205 is listed under Steering Parts \u0026amp; Accessories, as it supports hydraulic steering hose installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO7205 be used for a single hose steering run?\u003c\/strong\u003e The HO7205 is configured as a dual hose bulkhead kit, so it is intended for installations where two hoses pass through the same bulkhead point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the SeaStar HO7205 kit?\u003c\/strong\u003e The HO7205 is supplied as a bulkhead fitting kit for dual hose, field installed use, made of plastic.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350133979,"sku":"TEL-HO7205","price":35.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/HO7205__50369.1722496565.500.750.jpg?v=1785329140"},{"product_id":"seastar-ho8118-stainless-steel-bulkhead-hose-kit-standard-outboard-2-x-18-ft-5-5-m-for-seastar-and-baystar-steering","title":"SeaStar Bulkhead Hose Kit, Standard, Stainless Steel, 2 x 18 Foot Hoses - HO8118","description":"\u003cp\u003eThe SeaStar HO8118 is a standard bulkhead hose kit for outboard hydraulic steering systems, sized to route two 18 foot (5.5 m) hoses cleanly through a splashwell bulkhead. The kit is designed to keep hose runs tidy behind the transom, eliminating excess loose hose while helping to prevent kinking or chafing that can wear through hose material over time. Both hoses in the kit are constructed with stainless steel, giving the assembly added durability and corrosion resistance in a marine environment. The kit is compatible with all SeaStar and BayStar steering systems, making it a straightforward fit for boats already running SeaStar or BayStar hydraulic steering. Each hose measures approximately 216 inches long and 2 inches wide, with the pair combining for 36 feet of total hose length. At 3.59 pounds, the kit includes both hoses needed to complete a standard bulkhead installation, so no additional hose purchase is required for the run. This kit is intended for boaters replacing worn steering hoses or completing a new hydraulic steering installation where a clean, chafe-resistant bulkhead pass-through is needed. SeaStar backs the kit with a two-year recreational user warranty against manufacturer defects.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO8118\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bulkhead Hose Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length (each):\u003c\/strong\u003e 18 feet (5.5 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Hoses:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Hose Length:\u003c\/strong\u003e 36 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 216 inches long x 2 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.59 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957827852\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eCompatible with all SeaStar and BayStar steering systems.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SeaStar HO8118 bulkhead hose kit?\u003c\/strong\u003e The HO8118 kit includes two 18 foot (5.5 m) stainless steel steering hoses, sized for a standard bulkhead pass-through installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the hoses in this kit?\u003c\/strong\u003e Each hose in the HO8118 kit measures 18 feet (5.5 m), for a combined total of 36 feet across the pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat steering systems is the HO8118 compatible with?\u003c\/strong\u003e This bulkhead hose kit can be used with all SeaStar and BayStar steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the hoses made from?\u003c\/strong\u003e The hoses in the HO8118 kit are constructed with stainless steel for added durability in marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the HO8118 hose kit?\u003c\/strong\u003e The HO8118 bulkhead hose kit is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit help prevent hose kinking or chafing?\u003c\/strong\u003e Yes, the HO8118 bulkhead hose kit is designed for tidy hose routing through a splashwell bulkhead, which helps eliminate excess loose hose and reduces kinking or chafing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of each hose?\u003c\/strong\u003e Each hose in the HO8118 kit measures approximately 216 inches in length and 2 inches in width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HO8118 kit weigh?\u003c\/strong\u003e The complete SeaStar HO8118 hose kit weighs 3.59 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit for a single side or both sides of a bulkhead installation?\u003c\/strong\u003e The HO8118 is a standard bulkhead hose kit that includes two hoses, used together as a set for a single bulkhead steering installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO8118 come with a warranty?\u003c\/strong\u003e SeaStar backs the HO8118 bulkhead hose kit with a two-year recreational user warranty against manufacturer defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar HO8118 kit?\u003c\/strong\u003e The UPC for the SeaStar HO8118 bulkhead hose kit is 731957827852.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350166747,"sku":"TEL-HO8118","price":286.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51U0ha25jGL.jpg?v=1784477224"},{"product_id":"seastar-ht5092-nylon-hydraulic-steering-tubing-3-8-in-x-25-ft-fits-all-seastar-and-baystar-hydraulic-steering-systems","title":"SeaStar HT5092 Nylon Hydraulic Steering Tube, 3\/8 Inch x 25 Feet","description":"\u003cp\u003eThe SeaStar HT5092 is a nylon hydraulic steering tube built for building or extending SeaStar and BayStar hydraulic steering system hose runs. It measures 3\/8 inch in diameter and comes in a 25 foot length, giving installers enough material to route a full helm-to-cylinder connection or replace a worn or damaged section of steering line. The tubing is molded in black nylon, a material chosen for its resistance to hydraulic fluid, flexing, and the marine environment, so the hydraulic circuit stays sealed and responsive as the wheel is turned.\u003c\/p\u003e\u003cp\u003eThis tube is sold as bulk hydraulic tubing rather than a pre-fitted hose assembly, making it a practical option for custom installations, repairs, and helm relocations where standard pre-cut hose kit lengths do not match the run needed. It is designed to work with SeaStar and BayStar steering systems. The same tubing is also offered in longer lengths as separate part numbers for larger boats or longer helm-to-cylinder runs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HT5092\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.55 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e SeaStar and BayStar Steering Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Steering Tubing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe HT5092 nylon tube is compatible with SeaStar and BayStar hydraulic steering systems.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HT5092 used for?\u003c\/strong\u003e The HT5092 is a nylon hydraulic tube used to build or repair helm-to-cylinder hose runs in SeaStar and BayStar hydraulic steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this steering tube?\u003c\/strong\u003e It is 3\/8 inch in diameter and 25 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the HT5092 made of?\u003c\/strong\u003e It is made of black nylon, a material chosen for its resistance to hydraulic fluid and flexing in marine hydraulic steering circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HT5092 come with fittings already attached?\u003c\/strong\u003e No. The HT5092 is sold as bulk nylon tubing rather than a pre-fitted hose assembly, so fittings are installed separately during routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HT5092 weigh?\u003c\/strong\u003e The 25 foot HT5092 nylon tube weighs 1.55 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HT5092 compatible with BayStar steering?\u003c\/strong\u003e Yes, the HT5092 nylon tube is compatible with both SeaStar and BayStar hydraulic steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre longer lengths of this tubing available?\u003c\/strong\u003e Yes. The same 3\/8 inch nylon tubing is also available in 50 foot (HT5095), 75 foot (HT5097), and 100 foot (HT5100) lengths as separate part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HT5092 be used to repair a damaged steering hose instead of replacing the whole run?\u003c\/strong\u003e Yes, because it is sold as a 25 foot length of bulk 3\/8 inch nylon tubing, it can be cut to replace a damaged section of a SeaStar or BayStar steering hose run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the HT5092 tubing?\u003c\/strong\u003e The HT5092 nylon steering tube is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HT5092 a complete hose kit?\u003c\/strong\u003e No, the HT5092 is a single 25 foot length of 3\/8 inch nylon tubing rather than a complete pre-cut hose kit with bulkhead fittings.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989351117019,"sku":"TEL-HT5092","price":92.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51rpEd7cpaL.jpg?v=1784477319"},{"product_id":"seastar-ht5095-nylon-tube-3-8-x-50-for-hydraulic-steering-systems","title":"SeaStar Nylon Tube HT5095, 50 ft x 3\/8 in Hydraulic Steering Tubing","description":"\u003cp\u003eThe SeaStar Nylon Tube HT5095 is a 50 foot length of 3\/8 inch nylon tubing built for hydraulic steering line installation and replacement aboard boats using SeaStar hydraulic steering systems. Supplied as a continuous coil rather than a pre-cut kit, this tubing lets installers and repair techs cut runs to the exact length needed for a given helm-to-cylinder routing, making it a practical choice for custom installs, longer runs, or replacing sections of worn or damaged existing line.\u003c\/p\u003e\u003cp\u003eThe tube carries a polished nylon exterior, giving it a clean finished appearance where routing is visible and helping it resist the abrasion and UV exposure typical of a marine engine compartment or bilge area. Nylon hydraulic tubing of this type is valued for its rigidity, chemical resistance to hydraulic steering fluid, and consistent bore diameter, which helps maintain steering feel and system pressure over the length of the run.\u003c\/p\u003e\u003cp\u003eAt 3\/8 inch diameter, the HT5095 matches the tubing size used throughout SeaStar hydraulic steering plumbing, making it suitable for extending, repairing, or completely re-running a steering hydraulic circuit. The 50 foot length is enough material for most single- or dual-station steering installations with material to spare for fitting and routing adjustments.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HT5095\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 50 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.46 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 17.25 x 17 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957806659\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Steering Parts and Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal 3\/8 inch hydraulic steering tubing for use in SeaStar hydraulic steering system plumbing; suitable for cutting to length for a specific boat's steering line routing.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the SeaStar HT5095 nylon tube?\u003c\/strong\u003e The HT5095 is 3\/8 inch diameter nylon tubing supplied in a 50 foot length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HT5095 sold as a finished hose or as bulk tubing?\u003c\/strong\u003e It is supplied as a continuous 50 foot coil of nylon tubing, not a pre-cut hose with fittings attached, so it can be cut to the exact length needed for a steering line run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the HT5095 tube made of?\u003c\/strong\u003e The SeaStar HT5095 is made of nylon with a polished exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HT5095 weigh?\u003c\/strong\u003e The SeaStar HT5095 50 foot tube weighs 2.46 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the HT5095?\u003c\/strong\u003e The HT5095 ships in a package measuring 17.25 x 17 x 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HT5095 tubing be used for a hydraulic steering system?\u003c\/strong\u003e Yes, the HT5095 is 3\/8 inch nylon tubing intended for hydraulic steering line installation and replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to cut the HT5095 tube to length myself?\u003c\/strong\u003e Yes, since the HT5095 is supplied as a 50 foot coil, it needs to be cut to the length required for your specific steering line routing during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HT5095 tube resistant to UV and abrasion?\u003c\/strong\u003e The polished nylon construction of the HT5095 is suited to the abrasion and exposure typical of marine steering line routing in engine compartments and bilge areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar HT5095?\u003c\/strong\u003e The SeaStar HT5095 nylon tube has UPC 731957806659.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HT5095 come with any fittings included?\u003c\/strong\u003e The HT5095 is bulk nylon tubing; fittings are not included as part of this tube.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989351182555,"sku":"TEL-HT5095","price":137.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/513a_CGF_2L.jpg?v=1784477331"},{"product_id":"seastar-ht5100-nylon-tubing-3-8-x-100-for-hydraulic-steering-systems","title":"SeaStar Nylon Steering Tube 3\/8 Inch, 100 Foot Length - HT5100","description":"\u003cp\u003eThe SeaStar HT5100 is a 100 foot continuous length of nylon tubing used for hydraulic steering line installations. Supplied as one unbroken 100 foot (30.4 meter) roll, it lets installers run long steering lines without field splices or extra fittings, which keeps the hydraulic circuit cleaner and reduces potential leak points along the run. The tube has a 3\/8 inch outside diameter and a nominal wall thickness of 0.375 inches, sized for use with SeaStar hydraulic steering system tubing runs.\u003c\/p\u003e\u003cp\u003eConstructed from nylon, the tubing is built to hold up to the routing, bending, and clamping involved in a typical helm-to-cylinder steering installation. Because it ships as a single continuous length rather than pre-cut sections, it is well suited to boats needing a longer or custom-length run, or for shops that cut tubing to length for multiple installations. This is genuine SeaStar tubing, sold under the SeaStar brand.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HT5100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 0.38 inches (3\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Wall Thickness:\u003c\/strong\u003e 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Length:\u003c\/strong\u003e 100 feet (30.4 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957806673\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the SeaStar HT5100 steering tube?\u003c\/strong\u003e The HT5100 has a 3\/8 inch outside diameter with a nominal wall thickness of 0.375 inches, and is sold as one 100 foot (30.4 meter) length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is each HT5100 tube?\u003c\/strong\u003e Each HT5100 is a single continuous 100 foot (30.4 meter) length of nylon tubing, not a set of pre-cut sections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the HT5100 tubing made from?\u003c\/strong\u003e SeaStar HT5100 tubing is made from nylon, chosen for its resistance to the bending and clamping involved in hydraulic steering line routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HT5100 genuine SeaStar tubing?\u003c\/strong\u003e Yes, the HT5100 is genuine SeaStar-brand nylon steering tubing, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the HT5100 tube used for?\u003c\/strong\u003e The HT5100 is used to run hydraulic steering lines between the helm and steering cylinder, with the 100 foot length allowing longer or custom-length installations without splicing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HT5100 tube weigh?\u003c\/strong\u003e The 100 foot roll of SeaStar HT5100 nylon tubing weighs 4.03 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HT5100 come pre-cut or as a full roll?\u003c\/strong\u003e It ships as one continuous 100 foot roll of tubing rather than pre-cut lengths, so installers can cut it to the exact length needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HT5100 be cut to a shorter length for installation?\u003c\/strong\u003e Yes, since the HT5100 is supplied as a single 100 foot length of nylon tubing, it can be cut down to the specific run length required for the installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outside diameter of the HT5100 nylon tube?\u003c\/strong\u003e The outside diameter of the SeaStar HT5100 is 0.38 inches, commonly referred to as 3\/8 inch tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HT5100 tubing suitable for use with other tubing sizes in the same steering run?\u003c\/strong\u003e The HT5100 is specifically 3\/8 inch outside diameter nylon tubing; it should be matched with fittings and components sized for 3\/8 inch tubing.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989351280859,"sku":"TEL-HT5100","price":274.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41v0cHZcSJL.jpg?v=1784477337"},{"product_id":"uflex-kitob-20-hydraulic-steering-hose-kit-two-20-ft-flexible-hoses-for-marine-outboard-steering","title":"Uflex KITOB-20' Flexible Hydraulic Steering Hose Kit, Two 20-Foot Hoses","description":"\u003cp\u003eThe Uflex KITOB-20' is a hydraulic steering hose kit that includes two flexible hoses, each 20 feet long, for use in hydraulic boat steering systems. Flexible hydraulic steering hose is used to route fluid between the helm pump and the steering cylinder, and a flexible construction allows the hose to be routed through tight bulkheads, stringers, and curved runs where rigid tubing cannot easily reach. This kit supplies both hoses needed for a complete hydraulic steering run rather than a single length, simplifying ordering for a full installation or hose replacement job. The kit weighs 3.8 pounds as packaged.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e KITOB-20'\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Two Flexible Hoses 20FT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 20 feet (each hose)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 hoses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Flexible hydraulic steering hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Hydraulic Boat Steering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755015949\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Uflex KITOB-20' kit?\u003c\/strong\u003e The KITOB-20' kit includes two flexible hydraulic steering hoses, each 20 feet long, giving you both hoses needed for a hydraulic steering run in one purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the hoses in this kit?\u003c\/strong\u003e Each of the two hoses in the Uflex KITOB-20' kit measures 20 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hoses come in the KITOB-20' kit?\u003c\/strong\u003e Two flexible hydraulic steering hoses are included, both 20 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the KITOB-20' hose kit?\u003c\/strong\u003e The Uflex KITOB-20' kit weighs 3.8 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of hose is included in this kit?\u003c\/strong\u003e The KITOB-20' kit contains flexible hydraulic steering hose, designed to route through tight or curved spaces in a boat's steering system where rigid tubing is impractical.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Uflex KITOB-20' kit?\u003c\/strong\u003e The UPC for this product is 702755015949.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of boat part is the KITOB-20' kit?\u003c\/strong\u003e This kit is listed under hydraulic boat steering, covering the hoses used in a boat's hydraulic steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the KITOB-20' hose rigid or flexible?\u003c\/strong\u003e The hoses in the Uflex KITOB-20' kit are flexible, not rigid, allowing routing around obstructions in the boat's hull or console.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to buy two separate hoses for a full hydraulic steering install?\u003c\/strong\u003e No, the Uflex KITOB-20' kit already includes both hoses (two 20-foot lengths) needed, so a single order covers the pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this hose kit?\u003c\/strong\u003e The manufacturer part number is KITOB-20', made by Uflex.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991092277467,"sku":"UFX-KITOB-20","price":178.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/u_6f0f4a6a-150c-4145-9e1d-4fe464038970.jpg?v=1785347392"},{"product_id":"uflex-kitob-16-hydraulic-steering-hose-kit-16-ft-pair-with-fittings-and-bend-restrictors-for-hyco-and-protech-black","title":"Uflex KITOB-16' Hydraulic Hose Kit, 16 Feet, for Hyco and ProTech Steering Systems, Black","description":"\u003cp\u003eThe Uflex KITOB-16' Hydraulic Hose Kit supplies a matched pair of high-pressure flexible hydraulic hoses for Hyco and ProTech hydraulic steering systems. Each hose is pre-assembled with fittings and bend restrictors on both ends, so the kit is ready to route and connect without needing to fabricate or crimp fittings on site. The bend restrictors protect the hose ends from kinking or excessive flex at the connection points, a common failure area in hydraulic steering runs that see repeated helm-to-cylinder movement. At 16 feet in length, the hoses are sized for longer steering runs from the helm pump to the outboard or sterndrive steering cylinder. The hose material is black, low-permeation construction intended for marine hydraulic steering fluid service. Uflex is a manufacturer of steering and control systems for the marine industry, and its components are used as original equipment on numerous boat brands. This kit is intended as a matched replacement pair for Hyco and ProTech hydraulic steering systems where the existing hoses have failed, are leaking, or need to be extended or replaced as part of a steering system rebuild.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e KITOB-16'\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Length:\u003c\/strong\u003e 16 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair of hoses (2 hoses per kit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnds:\u003c\/strong\u003e Preassembled fittings and bend restrictors on both ends of each hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755015925\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHyco hydraulic steering systems\u003c\/li\u003e\n\u003cli\u003eProTech hydraulic steering systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Uflex KITOB-16' kit?\u003c\/strong\u003e The KITOB-16' kit includes a pair of high-pressure flexible hydraulic hoses, each 16 feet long, with fittings and bend restrictors already assembled on both ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat steering systems does the KITOB-16' fit?\u003c\/strong\u003e This hose kit is designed for Hyco and ProTech hydraulic steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the hoses in this kit?\u003c\/strong\u003e Each of the two hoses in the KITOB-16' kit is 16 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the hoses come with fittings already installed?\u003c\/strong\u003e Yes, both hoses in the Uflex KITOB-16' kit are supplied with fittings and bend restrictors preassembled on both ends, so no additional crimping or fitting installation is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the hoses?\u003c\/strong\u003e The hoses in the KITOB-16' kit are black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the KITOB-16' hose kit weigh?\u003c\/strong\u003e The kit weighs 3.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a bend restrictor used for on these hoses?\u003c\/strong\u003e Bend restrictors are fitted at both ends of each KITOB-16' hose to prevent the hose from kinking or over-flexing right at the fitting connection, which is where hydraulic hoses are most prone to fatigue and failure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit sold as a single hose or a pair?\u003c\/strong\u003e The KITOB-16' is sold as a matched pair of two hydraulic hoses, not a single hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho manufactures this hydraulic hose kit?\u003c\/strong\u003e The KITOB-16' hose kit is manufactured by Uflex, a maker of marine steering and control systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used to extend or replace existing steering hoses?\u003c\/strong\u003e Yes, the KITOB-16' pair is intended as a replacement or extension set for the hydraulic hoses on Hyco and ProTech steering systems.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991092343003,"sku":"UFX-KITOB-16","price":174.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51aQv57TX4L_c29b626f-fd19-4326-a165-133f5bf8d10d.jpg?v=1784491392"},{"product_id":"uflex-kitobdbr-02-outboard-hydraulic-steering-hose-kit-with-dual-bend-restrictors-2-ft","title":"Uflex KITOBDBR-02' Hydraulic Steering Hose Kit with Dual Bend Restrictor, 2 Feet","description":"\u003cp\u003eThe Uflex KITOBDBR-02' is a hydraulic steering hose kit fitted with a dual bend restrictor, measuring 2 feet in length. It is designed for hydraulic boat steering systems, where hose runs between the helm pump and the steering cylinder must be protected from kinking or excessive bending at connection points. The dual bend restrictor design supports the hose at both ends of the run, helping the line maintain a consistent bend radius and reducing stress on hydraulic fittings during installation and operation.\u003c\/p\u003e\u003cp\u003eThis kit is one length option in a family of Uflex hose kits with dual bend restrictors, which are also offered in 2.5 foot, 3 foot, 4 foot, and 5 foot lengths, allowing installers to match the hose run to the specific helm-to-cylinder distance on a given boat. Selecting the correct length kit helps avoid excess slack or hose strain in the steering system.\u003c\/p\u003e\u003cp\u003eThe KITOBDBR-02' weighs 1.9 pounds as supplied. It is intended for use as part of a hydraulic steering installation or as a replacement hose kit when servicing an existing hydraulic steering system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e KITOBDBR-02'\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Hydraulic Boat Steering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 2 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Restrictor:\u003c\/strong\u003e Dual (both hose ends)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755033585\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat length is the Uflex KITOBDBR-02' hose kit?\u003c\/strong\u003e The KITOBDBR-02' is the 2 foot length hose kit in Uflex's dual bend restrictor lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the dual bend restrictor do?\u003c\/strong\u003e It supports the hydraulic hose at both ends of the run, helping it maintain a consistent bend radius and reducing stress on the fittings where the hose connects to the steering pump and cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this hose kit weigh?\u003c\/strong\u003e The Uflex KITOBDBR-02' weighs 1.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose kit used with a specific steering system?\u003c\/strong\u003e It is used as a hydraulic hose run within a hydraulic boat steering system, connecting components such as the helm pump and steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre longer lengths available if 2 feet is not enough for my boat?\u003c\/strong\u003e Yes, the same dual bend restrictor hose kit is also available in 2.5 foot, 3 foot, 4 foot, and 5 foot lengths so you can match the kit to the required hose run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the KITOBDBR-02' include fittings?\u003c\/strong\u003e The KITOBDBR-02' is a hose kit with a dual bend restrictor; specific fitting contents beyond the hose and restrictor are not detailed in current product data.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this be used as a replacement part for an existing hydraulic steering system?\u003c\/strong\u003e Yes, the KITOBDBR-02' can be used to replace or install a 2 foot hydraulic hose run with dual bend restrictor protection in a hydraulic boat steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for the 2 foot version of this hose kit?\u003c\/strong\u003e The 2 foot version is Uflex part number KITOBDBR-02'.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is a bend restrictor needed on a hydraulic steering hose?\u003c\/strong\u003e A bend restrictor prevents the hose from kinking or bending too sharply near its connection points, which protects the hose and fittings and helps maintain reliable hydraulic steering performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the KITOBDBR-02' compatible with all hydraulic steering brands?\u003c\/strong\u003e Specific cross-brand compatibility is not detailed in current product data for the KITOBDBR-02'; confirm hose fitting and diameter compatibility with your existing hydraulic steering components before ordering.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991092375771,"sku":"UFX-KITOBDBR-02","price":174.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/u_d1bf4238-3e87-446a-b40c-11d4b21d5c3c.jpg?v=1785347392"},{"product_id":"uflex-kitob-18-hydraulic-steering-hose-kit-two-18-ft-pre-assembled-marine-outboard-hoses","title":"Uflex KITOB-18' Hydraulic Steering Hose Kit, Two 18 Foot Hoses","description":"\u003cp\u003eThe Uflex KITOB-18' is a hydraulic steering hose kit consisting of a pair of high pressure flexible hoses, each measuring 18 feet in length. Designed for marine hydraulic steering systems, the hoses come supplied with preassembled fittings and bend restrictors on both ends, allowing for a more straightforward installation without the need for separate fitting assembly or additional restrictor hardware.\u003c\/p\u003e\u003cp\u003eUflex is a manufacturer of steering and control systems for the marine industry, with products found as originally installed equipment on many widely known boat brands. This hose kit is built to work within Uflex hydraulic steering setups, replacing or extending existing helm-to-cylinder hydraulic lines where an 18 foot run is required on each side.\u003c\/p\u003e\u003cp\u003eThe kit ships as a complete two-hose set in black, ready to be routed and connected once removed from the box.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e KITOB-18'\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Two Flexible Hoses 18 Foot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 18 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Hoses:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings:\u003c\/strong\u003e Preassembled fittings on both ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Restrictors:\u003c\/strong\u003e Included on both ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 14 x 14 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755015932\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Hydraulic Boat Steering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long are the hoses in the Uflex KITOB-18' kit?\u003c\/strong\u003e Each of the two hoses in the Uflex KITOB-18' kit measures 18 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the KITOB-18' kit include fittings?\u003c\/strong\u003e Yes, both hoses in the Uflex KITOB-18' kit come with preassembled fittings on both ends, so they arrive ready to connect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre bend restrictors included with this hose kit?\u003c\/strong\u003e Bend restrictors are included on both ends of each hose in the Uflex KITOB-18' kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hoses come in the KITOB-18' kit?\u003c\/strong\u003e The kit consists of a pair, meaning two flexible hoses, each 18 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Uflex KITOB-18' hose kit?\u003c\/strong\u003e The hoses in this kit are black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Uflex KITOB-18' hose kit weigh?\u003c\/strong\u003e The complete two-hose KITOB-18' kit weighs 3.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of the KITOB-18' kit?\u003c\/strong\u003e The KITOB-18' kit measures 14 x 14 x 6 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Uflex KITOB-18' kit used for?\u003c\/strong\u003e It is a hydraulic steering hose kit intended for use in marine hydraulic steering systems, supplying the two flexible high pressure hose runs needed between the helm and cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs any additional hardware needed to install the KITOB-18' hoses?\u003c\/strong\u003e Since the hoses already include preassembled fittings and bend restrictors on both ends, no separate fitting assembly or restrictor hardware is required beyond routing and connecting the hoses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes the KITOB-18' hydraulic hose kit?\u003c\/strong\u003e The KITOB-18' hydraulic hose kit is made by Uflex, a manufacturer of steering and control systems for the marine industry.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991092441307,"sku":"UFX-KITOB-18","price":174.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/515r-x3fCeL.jpg?v=1784491397"},{"product_id":"uflex-kitobdbr-2-5-hydraulic-steering-hose-kit-with-dual-bend-restrictors-2-5-ft","title":"Uflex KITOBDBR-2.5' Hydraulic Steering Hose Kit with Dual Bend Restrictors, 2.5 Feet","description":"\u003cp\u003eThe Uflex KITOBDBR-2.5' is a hydraulic steering hose kit built for boat steering systems, supplied complete with dual bend restrictors. Bend restrictors protect the hydraulic hose from kinking or collapsing at tight turns and connection points, helping the hose maintain a consistent internal bore and reliable fluid flow between the helm pump and the steering cylinder. This kit is cut to a 2.5 foot length, making it suited for shorter hydraulic steering runs where a full-length hose kit is not required.\u003c\/p\u003e\u003cp\u003eAs part of a hydraulic steering system, this hose kit is intended to carry hydraulic fluid under pressure, so both the hose and its bend restrictors are sized to work together as a matched set rather than as separate components. The kit weighs 2 pounds as supplied.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e KITOBDBR-2.5'\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Steering Hose Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 2.5 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Dual bend restrictors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755033639\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Hydraulic Boat Steering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Uflex KITOBDBR-2.5' hose kit used for?\u003c\/strong\u003e The KITOBDBR-2.5' is a hydraulic steering hose kit from Uflex, intended for use in a boat's hydraulic steering system to carry fluid between steering components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this hose kit?\u003c\/strong\u003e This Uflex hose kit measures 2.5 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dual bend restrictors for?\u003c\/strong\u003e The two bend restrictors included with the KITOBDBR-2.5' kit fit onto the hose to prevent it from kinking or collapsing where it bends, which helps keep hydraulic fluid flow consistent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this kit weigh?\u003c\/strong\u003e The Uflex KITOBDBR-2.5' hydraulic steering hose kit weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit come with the bend restrictors already installed?\u003c\/strong\u003e The KITOBDBR-2.5' is supplied as a hose kit that includes dual bend restrictors as part of the package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose kit sold as a complete assembly or just the hose?\u003c\/strong\u003e It is sold as a kit, meaning the 2.5 foot hose and its two bend restrictors are supplied together as one package under part number KITOBDBR-2.5'.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of steering system is this hose kit designed for?\u003c\/strong\u003e This kit is designed for hydraulic boat steering systems, where hose runs carry pressurized fluid between the helm pump and the steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this kit for a longer steering hose run?\u003c\/strong\u003e The KITOBDBR-2.5' is cut to a fixed 2.5 foot length, so it is intended for hydraulic steering runs matching that length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Uflex hose kit?\u003c\/strong\u003e The UPC for the Uflex KITOBDBR-2.5' hydraulic steering hose kit is 702755033639.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the KITOBDBR-2.5' a genuine Uflex part?\u003c\/strong\u003e Yes, the KITOBDBR-2.5' is a Uflex manufacturer part number for this hydraulic steering hose kit.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991092539611,"sku":"UFX-KITOBDBR-2.5","price":174.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/u_f9ddcf22-a65a-4989-ad16-d202333880a6.jpg?v=1785347393"},{"product_id":"uflex-kitobdbr-03-dual-cylinder-dual-engine-connection-hose-kit-3-high-pressure-hoses-with-bend-restrictors","title":"Uflex KITOBDBR-03' Dual Cylinder\/Dual Engine Connection Hose Kit, 3 Foot Hose Length","description":"\u003cp\u003eThe Uflex KITOBDBR-03' is a dual cylinder\/dual engine connection hose kit built for hydraulic steering setups that require two separate hydraulic lines running to twin cylinders or twin engines. The kit includes two high pressure flexible hoses finished with pre-crimped brass fittings, so there is no need to source or crimp fittings separately during installation. Both ends of each hose are fitted with bend restrictors, which prevent the hose from kinking or collapsing at the connection point where it flexes during steering and engine movement -- a common failure point on hydraulic steering runs that lack this protection.\u003c\/p\u003e\u003cp\u003eThis kit is built with a 3 foot hose length, one of several lengths Uflex offers in this same hose kit series (2 foot, 2.5 foot, 3 foot, 4 foot, and 5 foot versions), so boaters can match the kit to the actual distance between their helm and their dual cylinder or dual engine hookup. It is recommended for use with all Uflex Silversteer series cylinders, making it a straightforward addition or replacement hose set for boats running Silversteer hydraulic steering. The complete kit weighs 2.1 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e KITOBDBR-03'\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Dual Cylinder\/Dual Engine Connection Hose Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 3 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Hoses:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Pre-crimped brass fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Restrictors:\u003c\/strong\u003e Both ends of both hoses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Uflex Silversteer series cylinders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755033592\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Hydraulic Boat Steering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRecommended for use with all Uflex Silversteer series hydraulic steering cylinders in dual cylinder or dual engine configurations.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hose length on the Uflex KITOBDBR-03' kit?\u003c\/strong\u003e The KITOBDBR-03' has a 3 foot hose length, which is one of five lengths Uflex offers in this same hose kit series (2 foot, 2.5 foot, 3 foot, 4 foot, and 5 foot).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cylinders is this hose kit compatible with?\u003c\/strong\u003e The KITOBDBR-03' is recommended for use with all Uflex Silversteer series hydraulic steering cylinders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hoses are included in the kit?\u003c\/strong\u003e Two high pressure flexible hoses are included, sized for dual cylinder or dual engine connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of fittings does the KITOBDBR-03' use?\u003c\/strong\u003e Each hose comes with pre-crimped brass fittings already installed, so no separate crimping is required during setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include bend restrictors?\u003c\/strong\u003e Yes, bend restrictors are fitted to both ends of both hoses in the KITOBDBR-03' kit to prevent kinking where the hose flexes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the KITOBDBR-03' hose kit weigh?\u003c\/strong\u003e The complete kit weighs 2.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit meant for a single cylinder or a dual setup?\u003c\/strong\u003e The KITOBDBR-03' is a dual cylinder\/dual engine connection kit, designed for hydraulic steering systems running two engines or two cylinders rather than a single station.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know which length hose kit to order?\u003c\/strong\u003e Measure the actual run needed between the helm pump and the dual cylinder or dual engine hookup, then choose from the 2 foot, 2.5 foot, 3 foot, 4 foot, or 5 foot KITOBDBR kits; this listing is the 3 foot version, KITOBDBR-03'.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the KITOBDBR-03' kit?\u003c\/strong\u003e The kit includes two high pressure flexible hoses, each with pre-crimped brass fittings and bend restrictors on both ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the KITOBDBR-03' a genuine Uflex part?\u003c\/strong\u003e Yes, the KITOBDBR-03' is a genuine Uflex hose kit, part of Uflex's dual cylinder\/dual engine connection hose kit lineup.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991096897755,"sku":"UFX-KITOBDBR-03","price":174.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41yUfKVqE5L.jpg?v=1784491416"},{"product_id":"uflex-kitobdbr-04-hydraulic-steering-hose-kit-with-dual-bend-restrictors-4-ft","title":"Uflex KIT OB-DBR-04 Hydraulic Steering Hose Kit with Dual Bend Restrictors, 4 Feet","description":"\u003cp\u003eThe Uflex KIT OB-DBR-04 is a 4 foot hydraulic hose kit built for outboard hydraulic steering systems, designed to extend or complete a hydraulic steering run while protecting the hose from kinking at tight bend points. The kit includes dual bend restrictors, which are fitted at the hose ends to maintain a safe minimum bend radius as the hose is routed through the boat, preventing the flow restriction and premature wear that can result from a sharp kink in a hydraulic line. This makes it a practical choice for boat builders and owners running or replacing hydraulic steering hose on an outboard-powered boat, including installations that add a second steering station or an autopilot connection where an additional hydraulic line run is required. The hose is supplied as a 4 foot length, letting it be sized to the specific routing distance needed between the helm pump and the outboard steering cylinder, or between the primary and secondary steering stations. As part of a standard outboard hydraulic steering system lineup, this hose kit is intended to work alongside the other components of the steering system rather than as a standalone replacement part. It ships ready to install with the dual bend restrictors already part of the kit, so no separate restrictor hardware needs to be sourced.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e KIT OB-DBR-04\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Hydraulic Boat Steering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 4 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Restrictors:\u003c\/strong\u003e Dual (2 included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755033608\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat length is the Uflex KIT OB-DBR-04 hose kit?\u003c\/strong\u003e The KIT OB-DBR-04 is a 4 foot hydraulic hose kit, sized for outboard hydraulic steering runs of that length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the bend restrictors for on this kit?\u003c\/strong\u003e Dual bend restrictors are included with the KIT OB-DBR-04 to maintain a safe minimum bend radius where the hydraulic hose is routed through tight spaces, preventing kinking that could restrict fluid flow or damage the hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bend restrictors come in the kit?\u003c\/strong\u003e Two bend restrictors are included in the Uflex KIT OB-DBR-04 kit, one for each end of the hose run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hose kit for outboard or inboard steering systems?\u003c\/strong\u003e The KIT OB-DBR-04 is built for outboard hydraulic steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hose kit be used to add a second steering station?\u003c\/strong\u003e Yes, a hydraulic hose run like the KIT OB-DBR-04 is used when adding a second steering station or an autopilot connection to an outboard hydraulic steering system, in addition to its use as a standard steering hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the KIT OB-DBR-04 weigh?\u003c\/strong\u003e This hose kit weighs 2.15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include fittings, or just hose?\u003c\/strong\u003e The KIT OB-DBR-04 kit includes the hydraulic hose with its dual bend restrictors; it is supplied as part of the outboard hydraulic steering hose lineup alongside the system's other fitting kits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Uflex KIT OB-DBR-04 hose kit carries UPC 702755033608.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the KIT OB-DBR-04 compatible with other Uflex outboard steering system components?\u003c\/strong\u003e Yes, the KIT OB-DBR-04 is part of Uflex's standard outboard hydraulic steering system lineup and is intended to be installed alongside the system's other hydraulic components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat sizes does this hose kit come in besides 4 feet?\u003c\/strong\u003e The KIT OB-DBR-04 designation is the 4 foot version of this hose kit; other lengths are sold under different part numbers in the same series.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991096963291,"sku":"UFX-KITOBDBR-04","price":174.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/u.jpg?v=1785347387"},{"product_id":"uflex-protech-2-1-front-mount-hydraulic-steering-kit-for-outboards-up-to-300-hp","title":"Uflex PROTECH 2.1 Front Mount Outboard Hydraulic Steering Kit","description":"\u003cp\u003eThe Uflex PROTECH 2.1 is a front mount hydraulic steering kit built for outboard engines, pairing the Protech helm system with a UC128-OBF\/2 outboard cylinder sized for this application. It is designed as a complete hydraulic steering solution for boats running a single outboard engine, delivering the precision and durability that hydraulic steering offers over cable systems, particularly on larger or higher horsepower outboard installations.\u003c\/p\u003e\u003cp\u003eThe kit centers on a stainless steel helm shaft paired with heavy duty shaft seals for long service life under continuous steering loads. The cylinder uses a carbon steel piston, while the link assemblies are 304 stainless steel, electropolished and passivated for corrosion resistance in the marine environment. Adjustable boss style fittings are used throughout, allowing hose routing to be positioned precisely without the risk of stripping or breaking fittings from over tightening during installation.\u003c\/p\u003e\u003cp\u003eThis steering kit is intended for outboard engines up to 300 HP and delivers 4.3 wheel turns lock-to-lock. The steering wheel is sold separately and is not included with this kit. Because cylinder sizing is engine specific, engine type should be specified when ordering to ensure the correct UC128-OBF cylinder variant is supplied with the PROTECH 2.1 helm.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PROTECH 2.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Hydraulic Steering Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Front mount, outboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder:\u003c\/strong\u003e UC128-OBF\/2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelm Shaft Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiston Material:\u003c\/strong\u003e Carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLink Assembly Material:\u003c\/strong\u003e 304 stainless steel, electropolished and passivated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Style:\u003c\/strong\u003e Adjustable boss style fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Turns Lock-to-Lock:\u003c\/strong\u003e 4.3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Engine Rating:\u003c\/strong\u003e Outboard engines up to 300 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Wheel Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 23 x 11 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 29 x 18 x 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 28.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755052982\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe PROTECH 2.1 is built for outboard engines up to 300 HP. Engine type should be specified when ordering so the correct UC128-OBF cylinder variant ships with the kit.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Uflex PROTECH 2.1?\u003c\/strong\u003e It is a front mount hydraulic steering kit for outboard engines, built around Uflex's Protech helm and a UC128-OBF\/2 outboard cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the PROTECH 2.1 include a steering wheel?\u003c\/strong\u003e No, the steering wheel is not included with the PROTECH 2.1 kit and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size outboard engine does the PROTECH 2.1 support?\u003c\/strong\u003e The PROTECH 2.1 is rated for outboard engines up to 300 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many wheel turns does it take to go lock-to-lock?\u003c\/strong\u003e The PROTECH 2.1 requires 4.3 wheel turns lock-to-lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cylinder used with the PROTECH 2.1?\u003c\/strong\u003e The PROTECH 2.1 pairs with the UC128-OBF\/2 outboard cylinder, one of three cylinder variants offered across the Protech front mount outboard steering line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials make up the PROTECH 2.1 steering kit?\u003c\/strong\u003e The PROTECH 2.1 uses a stainless steel helm shaft, heavy duty shaft seals, a carbon steel piston, and 304 electropolished and passivated stainless steel link assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the fitting design matter on the PROTECH 2.1?\u003c\/strong\u003e The PROTECH 2.1 uses adjustable boss style fittings, which let installers route hoses precisely without risking damage to the fittings from over tightening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to specify anything when ordering the PROTECH 2.1?\u003c\/strong\u003e Yes, engine type should be specified when ordering the PROTECH 2.1 so the correct UC128-OBF cylinder variant is supplied for the installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the PROTECH 2.1 kit?\u003c\/strong\u003e The PROTECH 2.1 item measures 23 x 11 x 8 inches and weighs 28.4 pounds; the package ships at 29 x 18 x 7 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Uflex PROTECH 2.1 manufactured?\u003c\/strong\u003e The PROTECH 2.1 hydraulic steering kit is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PROTECH 2.1 suitable for inboard or sterndrive boats?\u003c\/strong\u003e No, the PROTECH 2.1 is a front mount outboard steering kit designed specifically for outboard engine applications.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991108858075,"sku":"UFX-PROTECH 2.1","price":1586.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Uflex-ProTech-Hydraulic-Steering-System__34150.1739476157.500.750.jpg?v=1785188037"},{"product_id":"uflex-kitob-hydraulic-steering-hose-kit-two-preassembled-hoses-available-in-12-or-14","title":"Uflex KITOB Hydraulic Steering Hose Kit, Two Preassembled Hoses, Available in 12' or 14'","description":"\u003cp\u003eThe Uflex KITOB Hydraulic Steering Hose Kit is a matched pair of hydraulic steering hoses built for connecting an Uflex helm pump to a cylinder, ram, or outboard steering system. Each kit ships as two identical-length hoses with fittings preassembled on both ends of every hose, eliminating the need to source or crimp separate fitting hardware during installation. Bend restrictors are fitted at both ends of each hose to reduce kinking and excessive flexing at the connection points, one of the most common wear areas on a hydraulic steering line. Choose the hose length that matches the routing distance between your helm and steering cylinder to complete or replace a hydraulic steering run.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Uflex\u003c\/li\u003e\n\u003cli\u003eNumber of hoses: 2 per kit\u003c\/li\u003e\n\u003cli\u003eFittings: Preassembled on both ends of each hose\u003c\/li\u003e\n\u003cli\u003eBend restrictors: Included on both ends of each hose\u003c\/li\u003e\n\u003cli\u003eAvailable hose lengths: 12 feet and 14 feet (each hose in the kit matches the stated length)\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.9 pounds (12' kit)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis hose kit is available in two lengths: 12 feet and 14 feet, with both hoses in a given kit matching that length. Select the length based on the actual routing distance from the helm pump to the steering cylinder or outboard ram, measuring along the planned hose path rather than a straight-line distance, and allowing for any bends or service loops. If the measured run falls between the two offered lengths, choose the longer kit and coil or secure the excess hose rather than risk a hose that will not reach.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"12'","offer_id":49047440883931,"sku":"UFX-KITOB-12","price":174.0,"currency_code":"USD","in_stock":false},{"title":"14'","offer_id":49047440916699,"sku":"UFX-KITOB-14","price":174.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51aQv57TX4L_330a65d2-56f9-4631-b91a-384504c58d1a.jpg?v=1785424918"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/u_7b8449c7-fa4a-45bf-8b3e-a46d7d1c25fd.jpg?v=1785356965","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-steering-systems-hydraulic-steering-hydraulic-steering-hoses-fittings-kits.oembed?page=2","provider":"Good Vibes Marina","version":"1.0","type":"link"}