{"title":"Hydraulic Steering","description":null,"products":[{"product_id":"sierra-18-7508-power-steering-pump-for-mercruiser-mcm-mie-gm-v6-v8-283-305-350-cid-replaces-16792a39","title":"Sierra 18-7508 Power Steering Pump, Replaces 16792A39, 16792A33, MerCruiser MCM\/MIE GM V6 \u0026 V8 283\/305\/350 cid Engines","description":"\u003cp\u003eThe Sierra 18-7508 is a marine power steering pump built as a direct replacement for MerCruiser MCM\/MIE stern drive applications powered by GM V6 and V8 engines in the 283, 305, and 350 cubic inch displacement range. It is engineered to meet or exceed OEM performance, supplying the hydraulic pressure needed to actuate the sterndrive's steering cylinder and deliver reliable, consistent steering response at the helm.\u003c\/p\u003e\u003cp\u003eThis pump is a bolt-on replacement designed to install using the same mounting points and drive configuration as the original equipment pump it replaces, so it drops into the existing power steering circuit without modification. It is finished in white and ships as a single unit ready for installation. Every Sierra power steering pump is backed by Sierra's industry leading warranty, giving boat owners confidence that a failed or worn original pump can be swapped for a unit built to the same standard.\u003c\/p\u003e\u003cp\u003eBecause steering response and safety depend on a properly functioning pump, replacing a worn, leaking, or noisy power steering pump with the 18-7508 restores factory-level steering feel on GM-powered MerCruiser MCM\/MIE sterndrive boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7508\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Engine Parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.18 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 9.9 x 9.8 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282287221\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e MerCruiser MCM\/MIE GM V6 \u0026amp; V8 (283, 305 \u0026amp; 350 cid) engines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMerCruiser MCM\/MIE sterndrives with GM V6 \u0026amp; V8 (283, 305 \u0026amp; 350 cid) engines\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e16792A39\u003c\/li\u003e\n\u003cli\u003e16792A33\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boats and engines does the Sierra 18-7508 power steering pump fit?\u003c\/strong\u003e The Sierra 18-7508 is built for MerCruiser MCM\/MIE sterndrives powered by GM V6 and V8 engines in the 283, 305, and 350 cubic inch displacement range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-7508 replace?\u003c\/strong\u003e This pump replaces OEM numbers 16792A39 and 16792A33, so it can be used as a direct swap for either of those original part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-7508 an OEM or aftermarket power steering pump?\u003c\/strong\u003e It is an aftermarket replacement pump manufactured by Sierra and built to meet or exceed the original MerCruiser OEM specification for these applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-7508 power steering pump weigh?\u003c\/strong\u003e The pump weighs 10.18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-7508 power steering pump?\u003c\/strong\u003e It is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-7508?\u003c\/strong\u003e Each order includes one complete power steering pump, the Sierra 18-7508, ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-7508 come with a warranty?\u003c\/strong\u003e Yes, the Sierra 18-7508 is backed by Sierra's industry leading warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the 18-7508?\u003c\/strong\u003e The pump ships in packaging measuring 9.9 x 9.8 x 8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-7508 work on GM V8 350 cid MerCruiser applications?\u003c\/strong\u003e Yes, the 283, 305, and 350 cid GM V6 \u0026amp; V8 MCM\/MIE applications are all covered by the Sierra 18-7508.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of the 18-7508 straightforward for a DIY boat owner?\u003c\/strong\u003e The 18-7508 is designed as a direct replacement for the original MCM\/MIE power steering pump, so it mounts in the same location using the existing steering circuit connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my power steering pump needs replacing?\u003c\/strong\u003e Symptoms like stiff or inconsistent steering, pump noise, or fluid leaks on a MerCruiser MCM\/MIE GM V6 or V8 sterndrive typically indicate it is time to replace the pump with a unit like the Sierra 18-7508.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988386459867,"sku":"SIE-18-7508","price":637.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7508__50557.1753448931.500.750.jpg?v=1785188370"},{"product_id":"power-steering-pump-pulley-for-v-belt-sterndrives-replaces-73873a1-73873-sierra-18-8297","title":"Sierra Power Steering Pump Pulley 18-8297, Sterndrives with V-Belt, Replaces 73873A1, 73873","description":"\u003cp\u003eThe Sierra 18-8297 is a power steering pump pulley built for sterndrive engines equipped with a v-belt drive system. It mounts to the power steering pump shaft and, together with the drive belt, transfers rotational power from the engine to the pump so the steering system builds the hydraulic pressure needed for smooth helm response. This pulley is a direct fit for the v-belt sterndrive application it is designed for and is intended as a replacement for a worn, cracked, or damaged original pulley, or for a pulley that has developed excessive belt slip or wobble.\u003c\/p\u003e\u003cp\u003eReplacing a worn power steering pump pulley restores proper belt alignment and tension, which helps prevent belt squeal, premature belt wear, and inconsistent steering assist. Because it is designed specifically for v-belt sterndrive setups, it is not interchangeable with the serpentine-belt version of this pulley, so confirm your engine's belt type before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8297\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Power Steering Pump Pulley\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt Type:\u003c\/strong\u003e V-belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Sterndrives with v-belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.68 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 3 x 7.5 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282294960\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSterndrives with v-belt\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e73873A1\u003c\/li\u003e\n\u003cli\u003e73873\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-8297 pulley used for?\u003c\/strong\u003e The Sierra 18-8297 is a power steering pump pulley that mounts to the power steering pump shaft on a sterndrive engine equipped with a v-belt, transferring engine rotation to the pump to generate steering assist.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-8297 pulley work with a serpentine belt engine?\u003c\/strong\u003e No. The 18-8297 is built specifically for sterndrives with a v-belt drive; a serpentine-belt engine requires a different power steering pump pulley.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-8297 replace?\u003c\/strong\u003e The Sierra 18-8297 power steering pump pulley replaces OEM numbers 73873A1 and 73873.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-8297 pulley weigh?\u003c\/strong\u003e The Sierra 18-8297 power steering pump pulley weighs 1.68 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-8297 pulley?\u003c\/strong\u003e Product dimensions for the Sierra 18-8297 are 3 x 7.5 x 8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8297 a genuine OEM part or an aftermarket replacement?\u003c\/strong\u003e The 18-8297 is a Sierra-brand replacement pulley engineered to replace OEM numbers 73873A1 and 73873, not an original manufacturer part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace my power steering pump pulley?\u003c\/strong\u003e A pulley is typically replaced when it becomes worn, cracked, or damaged, or when belt slip and wobble develop, since a bad pulley can cause belt squeal and inconsistent steering assist. The 18-8297 restores proper belt alignment on v-belt sterndrive applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-8297 come with mounting hardware or a belt?\u003c\/strong\u003e The Sierra 18-8297 listing covers the power steering pump pulley itself; check your specific order details for whether hardware or a belt is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my sterndrive uses a v-belt or a serpentine belt?\u003c\/strong\u003e Check the belt routing on your engine: a v-belt is a single narrow grooved belt per pulley, while a serpentine belt is a wider single belt that snakes around multiple pulleys. The Sierra 18-8297 is for the v-belt configuration only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-8297 be installed as a direct replacement?\u003c\/strong\u003e Yes, the Sierra 18-8297 is designed as a direct replacement for the OEM pulley on sterndrives with a v-belt, matching the original 73873A1 and 73873 pulleys it replaces.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988433449179,"sku":"SIE-18-8297","price":74.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8297__22433.1558186722.500.750.jpg?v=1785188206"},{"product_id":"sierra-18-9701-2-power-trim-steering-fluid-1-quart-marine-power-steering-trim-tilt-hydraulic-fluid","title":"Sierra Power Trim and Steering Fluid 18-9701-2, 32 oz (1 Quart) Marine Hydraulic Fluid","description":"\u003cp\u003eSierra Power Trim and Steering Fluid (part number 18-9701-2) is a 32 fluid ounce (1 quart) bottle of hydraulic fluid formulated for marine power trim and power steering systems. It is a liquid, 10W viscosity fluid rated to SAE J300 10W, packaged in a plastic bottle for easy pouring and controlled top-offs. The fluid is intended for marine use and is formulated to help prevent corrosion inside trim and steering components, which is important given the constant exposure of these systems to moisture and salt or fresh water environments.\u003c\/p\u003e\u003cp\u003eThis fluid is used to fill or top off hydraulic power trim\/tilt units and hydraulic power steering systems on boats, keeping internal components lubricated and protected while maintaining proper hydraulic function. Each bottle contains a single quart (32 fluid ounces) of fluid, sold as one item per package.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-9701-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Power Trim and Steering Fluid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Volume:\u003c\/strong\u003e 32 fluid ounces (1 quart)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Information:\u003c\/strong\u003e Bottle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Liquid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity:\u003c\/strong\u003e 10W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAE J300 Viscosity Grade:\u003c\/strong\u003e 10W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Uses:\u003c\/strong\u003e Marine power trim and power steering systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Uses:\u003c\/strong\u003e Prevent corrosion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic (bottle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282384388\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.95 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Sierra 18-9701-2 used for?\u003c\/strong\u003e Sierra 18-9701-2 is a power trim and steering fluid used to fill or top off hydraulic power trim\/tilt units and power steering systems on boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much fluid comes in one bottle of 18-9701-2?\u003c\/strong\u003e Each bottle of Sierra 18-9701-2 contains 32 fluid ounces, which is 1 quart of power trim and steering fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat viscosity is Sierra 18-9701-2 power trim and steering fluid?\u003c\/strong\u003e It is a 10W fluid rated to the SAE J300 10W viscosity grade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-9701-2 formulated to protect against corrosion?\u003c\/strong\u003e Yes, the fluid is specifically formulated for marine use and helps prevent corrosion inside power trim and power steering components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat form is this product in?\u003c\/strong\u003e Sierra 18-9701-2 is a liquid hydraulic fluid, supplied ready to use in a plastic bottle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fluid intended for marine or automotive use?\u003c\/strong\u003e Sierra 18-9701-2 is recommended for marine applications, specifically power trim and power steering systems on boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bottles are included when I order 18-9701-2?\u003c\/strong\u003e One bottle containing 32 fluid ounces (1 quart) of Sierra power trim and steering fluid is included per unit ordered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bottle made of?\u003c\/strong\u003e The 18-9701-2 fluid is packaged in a plastic bottle for pouring into trim and steering reservoirs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a bottle of Sierra 18-9701-2 weigh?\u003c\/strong\u003e A bottle of Sierra 18-9701-2 power trim and steering fluid weighs 1.95 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sierra 18-9701-2 have a UPC code?\u003c\/strong\u003e Yes, Sierra 18-9701-2 power trim and steering fluid carries UPC 808282384388.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988436660443,"sku":"SIE-18-9701-2","price":7.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/FG__13844.1753840776.500.750.jpg?v=1785188029"},{"product_id":"seastar-ha1205-pilot-retro-fit-kit-for-power-assist-steering-3-bolts-3-o-rings","title":"SeaStar HA1205 Pilot Retro Fit Kit for SeaStar Power Assist Hydraulic Steering","description":"\u003cp\u003eThe SeaStar HA1205 Pilot Retro Fit Kit lets you retrofit a SeaStar power assist unit to work with a SeaStar hydraulic pump, adding autopilot compatibility to your boat's power assist steering system. SeaStar Power Assist steering is designed for today's high horsepower engines, which are heavier and generate more propeller torque than earlier engines, creating steering loads that can be tiring and uncomfortable to hold at the wheel. By virtually eliminating these steering loads, the SeaStar Power Assist system gives boaters the same comfortable, effortless steering feel found in modern cars, even in demanding, high load applications, so the boat can be driven safely and easily by the whole family.\u003c\/p\u003e\u003cp\u003eThe HA1205 kit includes the hardware needed to complete the retrofit: 3 bolts and 3 O-rings. It is intended for use with a SeaStar hydraulic pump as part of installing pilot capability onto an existing SeaStar power assist steering unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HA1205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Pilot Retro Fit Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Helm Pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Retro Fit Kit (3 bolts, 3 O-rings)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957898036\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFor use with SeaStar hydraulic pump, to retrofit to a SeaStar power assist unit\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HA1205 used for?\u003c\/strong\u003e The HA1205 is a Pilot Retro Fit Kit used to retrofit a SeaStar power assist unit for use with a SeaStar hydraulic pump, enabling pilot (autopilot) compatibility on power assist hydraulic steering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the HA1205 kit?\u003c\/strong\u003e The kit includes 3 bolts and 3 O-rings, the hardware needed to complete the pilot retrofit onto the SeaStar power assist unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HA1205 work with any hydraulic pump?\u003c\/strong\u003e No, HA1205 is designed specifically for use with a SeaStar hydraulic pump as part of a SeaStar power assist steering setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HA1205 Pilot Retro Fit Kit weigh?\u003c\/strong\u003e The HA1205 weighs 0.16 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would a boat owner install a power assist retrofit kit like the HA1205?\u003c\/strong\u003e SeaStar Power Assist steering is built to handle the heavier weight and higher propeller torque of today's high horsepower engines, and installing the HA1205 pilot retrofit adds pilot compatibility to that power assist system so steering stays light and comfortable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HA1205 genuine SeaStar hardware?\u003c\/strong\u003e Yes, HA1205 is the manufacturer part number for the SeaStar Pilot Retro Fit Kit, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HA1205 kit include the power assist pump itself?\u003c\/strong\u003e No, the HA1205 kit only includes the retrofit hardware (3 bolts and 3 O-rings); it is used to adapt an existing SeaStar power assist unit and hydraulic pump, which are separate components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the HA1205 reduce steering effort on a high horsepower boat?\u003c\/strong\u003e The retrofit itself is for pilot compatibility, but it installs onto a SeaStar Power Assist system, which is designed to virtually eliminate steering loads caused by heavier, high torque engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the warranty on the HA1205?\u003c\/strong\u003e The SeaStar HA1205 Pilot Retro Fit Kit carries a 1 year limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many of each part are in the HA1205 kit?\u003c\/strong\u003e The HA1205 kit contains exactly 3 bolts and 3 O-rings, sold as a single retro fit kit (1 kit per package).\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989347414235,"sku":"TEL-HA1205","price":56.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/tel-ha1205_lg__90356.1558179855.500.750.jpg?v=1785189223"},{"product_id":"seastar-hydraulic-steering-oil-ha5430h-32-fl-oz-1-liter-marine-steering-fluid","title":"SeaStar Hydraulic Steering Oil, 32 fl oz (1 Liter), Part HA5430H","description":"\u003cp\u003eSeaStar Hydraulic Oil is the fluid specified for use in SeaStar hydraulic steering systems. Supplied in a 32 fluid ounce (1 liter) bottle, it is formulated to maintain proper lubrication and consistent hydraulic response through the helm pump, cylinder, and steering lines. Using the correct hydraulic fluid is essential to keeping a hydraulic steering system operating smoothly, since the wrong fluid type can degrade seals or cause inconsistent steering feel over time.\u003c\/p\u003e\u003cp\u003eThis oil is intended for topping off fluid levels or performing a full system fill or bleed during routine maintenance, after installing a new SeaStar steering system, or when servicing helm pumps and cylinders. Keeping fresh hydraulic fluid in the system helps prevent air entrapment and supports consistent, predictable steering response at the helm.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HA5430H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume:\u003c\/strong\u003e 32 fluid ounces (1 liter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.89 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Hydraulic Boat Steering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic steering fluid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is SeaStar Hydraulic Oil used for?\u003c\/strong\u003e SeaStar Hydraulic Oil (part HA5430H) is used to fill, top off, or bleed SeaStar hydraulic steering systems, including the helm pump, cylinder, and connecting lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much fluid comes in one bottle of HA5430H?\u003c\/strong\u003e Each bottle of SeaStar Hydraulic Oil holds 32 fluid ounces, which is equal to 1 liter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a bottle of SeaStar Hydraulic Oil weigh?\u003c\/strong\u003e A bottle of HA5430H weighs 1.89 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this oil for a full system fill on a new SeaStar steering setup?\u003c\/strong\u003e Yes, SeaStar Hydraulic Oil is suitable for a full fill and bleed of a SeaStar hydraulic steering system, not just topping off existing fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs SeaStar Hydraulic Oil only for SeaStar branded steering systems?\u003c\/strong\u003e SeaStar Hydraulic Oil, part HA5430H, is the fluid designated for SeaStar hydraulic steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow often should hydraulic steering fluid be replaced?\u003c\/strong\u003e The dossier for HA5430H does not specify a replacement interval; check your steering system's fluid level periodically and top off with SeaStar Hydraulic Oil as needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens if the wrong fluid is used in a hydraulic steering system?\u003c\/strong\u003e Using a fluid other than the one specified, such as SeaStar Hydraulic Oil for SeaStar systems, can affect seal performance and steering consistency, which is why the correct fluid type matters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bottle include a pump or applicator?\u003c\/strong\u003e The listing for HA5430H is for the 32 fluid ounce bottle of hydraulic oil itself; no additional accessories are specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HA5430H the genuine SeaStar part number?\u003c\/strong\u003e Yes, HA5430H is the SeaStar part number for this 32 fluid ounce (1 liter) bottle of hydraulic steering oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size container does SeaStar Hydraulic Oil come in?\u003c\/strong\u003e SeaStar Hydraulic Oil, part HA5430H, comes in a 32 fluid ounce (1 liter) bottle.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989347610843,"sku":"TEL-HA5430H","price":27.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/HA5430H__14255.1723556987.500.750.jpg?v=1785329141"},{"product_id":"seastar-ha5440h-hydraulic-steering-fluid-1-gallon-performance-matched-for-seastar-and-baystar-steering-systems","title":"SeaStar Hydraulic Steering Fluid HA5440H, 1 Gallon, for SeaStar\/BayStar Hydraulic Steering Systems","description":"\u003cp\u003eSeaStar Hydraulic Steering Fluid (HA5440H) is a 1 gallon supply of the fluid engineered specifically for SeaStar and BayStar hydraulic steering systems. It is formulated with a proprietary additive package that includes anti-foaming and anti-rusting agents, anti-oxidants, viscosity stabilizers, corrosion inhibitors, wear additives, and a water emulsification additive, all working together to protect the internal components of a hydraulic steering system and keep steering response smooth and consistent.\u003c\/p\u003e\u003cp\u003eThis fluid is validated and performance matched specifically for SeaStar Solutions hydraulic steering systems, meaning it is tested and engineered to work with the tolerances and materials used in those systems rather than being a generic hydraulic fluid. Due to upgrades in SeaStar Solutions steering system components, only SeaStar Steering Fluid is recommended for use in these systems. HA5440H is the same formulation as the earlier HA5440; the part number changed but the fluid itself did not. It is made in the USA and supplied as a liquid in a 1 gallon bottle (128 fluid ounces). For a clean bleed of a hydraulic steering system, a hydraulic filler kit (part number HA5458) is available separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HA5440H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Steering Fluid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid Volume:\u003c\/strong\u003e 1 gallon (128 fluid ounces)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Liquid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Bottle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e SeaStar\/BayStar hydraulic steering systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957801098\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is SeaStar Hydraulic Steering Fluid HA5440H used for?\u003c\/strong\u003e HA5440H is a hydraulic fluid formulated specifically for use in SeaStar and BayStar hydraulic steering systems, supplied in a 1 gallon bottle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HA5440H the same as HA5440?\u003c\/strong\u003e Yes. HA5440H has the exact same formulation as HA5440; the change is a part number update only and does not affect the fluid itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much fluid comes in one bottle of HA5440H?\u003c\/strong\u003e Each bottle of SeaStar HA5440H contains 1 gallon, equal to 128 fluid ounces, of hydraulic steering fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use a different brand of hydraulic fluid in my SeaStar steering system?\u003c\/strong\u003e SeaStar Solutions recommends using only SeaStar Steering Fluid, such as HA5440H, in their hydraulic steering systems due to upgrades made to SeaStar Solutions steering system components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat additives does SeaStar HA5440H hydraulic steering fluid contain?\u003c\/strong\u003e HA5440H contains a proprietary additive package with anti-foaming agents, anti-rusting agents, anti-oxidants, viscosity stabilizers, corrosion inhibitors, wear additives, and a water emulsification additive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs SeaStar HA5440H compatible with BayStar steering systems?\u003c\/strong\u003e Yes, HA5440H is specified for use in both SeaStar and BayStar hydraulic steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a gallon of HA5440H weigh?\u003c\/strong\u003e A 1 gallon bottle of SeaStar HA5440H hydraulic steering fluid weighs 7.45 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is SeaStar HA5440H manufactured?\u003c\/strong\u003e SeaStar HA5440H hydraulic steering fluid is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HA5440H validated for performance in SeaStar systems, or is it a generic hydraulic fluid?\u003c\/strong\u003e HA5440H is validated and performance matched specifically for SeaStar Solutions hydraulic steering systems, not a generic hydraulic fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is used to bleed a hydraulic steering system when filling it with HA5440H?\u003c\/strong\u003e A hydraulic filler kit, part number HA5458, is available separately and allows for a clean bleed of a hydraulic steering system when filling with SeaStar fluid such as HA5440H.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat form does HA5440H come in?\u003c\/strong\u003e SeaStar HA5440H is supplied as a liquid in a bottle, packaged as a 1 gallon container.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989347741915,"sku":"TEL-HA5440H","price":99.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/HA5440H__11019.1737850485.500.750.jpg?v=1785188111"},{"product_id":"seastar-ha6450-helm-remote-fill-kit-for-all-seastar-hydraulic-steering-helms","title":"SeaStar Helm Remote Fill Kit HA6450, Compatible with All SeaStar Helms","description":"\u003cp\u003eThe SeaStar Helm Remote Fill Kit, part number HA6450, allows you to relocate your SeaStar helm fill point to either a more convenient or a more concealed location on your boat. Instead of accessing the fill port directly at the helm, this kit routes the fill connection to a spot that is easier to reach during service or better hidden from view for a cleaner installation. This kit is compatible with all SeaStar helms, making it a straightforward upgrade or addition for any SeaStar hydraulic steering system regardless of helm model. It is a simple, purpose-built accessory designed to simplify routine fluid top-offs and system bleeding by giving installers and boat owners flexible access to the fill point without having to work directly at the helm unit itself.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HA6450\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Helm Remote Fill Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Helm Pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.42 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All SeaStar helms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957895134\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eCompatible with all SeaStar helms.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SeaStar HA6450 Remote Fill Kit do?\u003c\/strong\u003e It allows relocation of your SeaStar helm fill to either a more convenient or a more concealed location, so you are not limited to filling directly at the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit work with my SeaStar helm?\u003c\/strong\u003e Yes, the HA6450 Remote Fill Kit can be used with all SeaStar helms, so it fits regardless of which SeaStar helm model is installed on your boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HA6450 Remote Fill Kit weigh?\u003c\/strong\u003e The SeaStar HA6450 Remote Fill Kit weighs 0.42 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I want to relocate my helm fill point?\u003c\/strong\u003e Relocating the fill point with the HA6450 kit lets you position it somewhere more convenient to access during service, or somewhere more concealed for a cleaner look at the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HA6450 a genuine SeaStar part?\u003c\/strong\u003e Yes, HA6450 is the SeaStar manufacturer part number for this Helm Remote Fill Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit work with BayStar helms?\u003c\/strong\u003e The HA6450 kit is specified for use with all SeaStar helms; SeaStar does not list BayStar helm compatibility for this kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is the HA6450?\u003c\/strong\u003e The HA6450 is listed under Helm Pumps as a SeaStar Helm Remote Fill Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used on any boat with SeaStar steering?\u003c\/strong\u003e Since the HA6450 Remote Fill Kit works with all SeaStar helms, it can be used on any boat equipped with a SeaStar helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar HA6450 kit?\u003c\/strong\u003e The UPC for the SeaStar Helm Remote Fill Kit, part number HA6450, is 731957895134.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of the HA6450 kit simple?\u003c\/strong\u003e The HA6450 is designed to relocate the helm fill point to a more convenient or concealed location, making it a straightforward add-on for existing SeaStar helm installations.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989347807451,"sku":"TEL-HA6450","price":63.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/tel-ha6450_lg__70352.1558180226.500.750.jpg?v=1785188387"},{"product_id":"seastar-ha5438-bottle-filler-kit-for-hydraulic-steering-helms-fill-tube-and-vent-push-pin","title":"SeaStar Hydraulic Steering Bottle Filler Kit, HA5438, for Outboard and Inboard\/Outboard Helms","description":"\u003cp\u003eThe SeaStar HA5438 Bottle Filler Kit is a plastic fill-tube accessory used to bleed and fill SeaStar hydraulic steering systems. One end of the tube screws directly into the fill hole of a SeaStar hydraulic pump, while the other end attaches to a quart bottle of SeaStar hydraulic steering fluid, letting the fluid gravity-feed into the helm while air is vented out through the kit's push-pin vent. This makes it much easier to bleed trapped air from the system during initial installation or routine fluid changes, without spilling fluid or losing pressure control.\u003c\/p\u003e\u003cp\u003eThe kit is built for use with all inboard\/outboard, outboard, and inboard SeaStar hydraulic helms, and is included as standard equipment with all SeaStar cylinders. For reference, a single-station SeaStar hydraulic steering system requires 2 quarts of SeaStar hydraulic fluid to fill completely. The kit consists of a plastic fill tube and a push-pin vent tool, and is sold as a complete, ready-to-use filler and bleed accessory for SeaStar steering maintenance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HA5438\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bottle Filler Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Fill tube and push-pin vent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluid Capacity (single station):\u003c\/strong\u003e 2 quarts of SeaStar hydraulic fluid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e TELHA5438\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAll inboard\/outboard, outboard, and inboard SeaStar hydraulic helms\u003c\/li\u003e\n\u003cli\u003eIncluded as standard equipment with all SeaStar cylinders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTELHA5438\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HA5438 Bottle Filler Kit used for?\u003c\/strong\u003e The HA5438 is a fill-tube kit used to fill and bleed air from SeaStar hydraulic steering systems by feeding fluid from a quart bottle directly into the pump's fill hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HA5438 fit inboard steering helms, or only outboards?\u003c\/strong\u003e The HA5438 Bottle Filler Kit is used for all inboard\/outboard, outboard, and inboard SeaStar hydraulic helms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much fluid does a single-station SeaStar steering system need?\u003c\/strong\u003e A single-station SeaStar hydraulic steering system requires 2 quarts of SeaStar hydraulic fluid to fill, which the HA5438 filler kit is designed to help dispense and bleed in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the HA5438 kit?\u003c\/strong\u003e The HA5438 kit includes a plastic fill tube and a push-pin vent tool for bleeding air from the steering system during filling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HA5438 filler kit already included with new SeaStar cylinders?\u003c\/strong\u003e Yes, the HA5438 Bottle Filler Kit is included with all SeaStar cylinders, so it is typically only purchased separately as a replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the HA5438 fill tube made of?\u003c\/strong\u003e The HA5438 fill tube is made of plastic and screws into the fill hole of the SeaStar hydraulic pump on one end, with the other end attaching to the fluid bottle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent number for the HA5438?\u003c\/strong\u003e Yes, the HA5438 Bottle Filler Kit has an OEM equivalent part number of TELHA5438.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the push-pin vent on the HA5438 work?\u003c\/strong\u003e The push-pin vent included with the HA5438 kit is used to release trapped air from the hydraulic line while fluid is fed in through the fill tube, helping bleed the system properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HA5438 be used when replacing steering fluid, not just during initial installation?\u003c\/strong\u003e Yes, the HA5438 filler kit can be used any time fluid needs to be added or the system needs to be bled, including during routine fluid changes on a SeaStar hydraulic helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HA5438 work with a specific brand of hydraulic fluid?\u003c\/strong\u003e The HA5438 is designed for use with SeaStar hydraulic steering fluid, with a single-station system requiring 2 quarts to fill.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989347840219,"sku":"TEL-HA5438","price":26.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/tel-ha5438_large__57561.1558179022.500.750.jpg?v=1785188363"},{"product_id":"seastar-ha5450-remote-fill-and-vent-plug-kit-for-ss1250v-and-ss1275v-hydraulic-helms","title":"SeaStar HA5450 Remote Fill \u0026 Vent Plug Kit for SS1250V\/1275V Helms","description":"\u003cp\u003eThe SeaStar HA5450 Remote Fill \u0026amp; Vent Plug Kit is designed for SS1250V and SS1275V hydraulic steering helms, giving boaters a simple way to fill and vent the hydraulic steering system during initial setup or routine maintenance. Proper filling and venting of a hydraulic helm is essential to removing trapped air from the system, which helps maintain smooth, consistent steering response at the wheel. The kit features a polished exterior finish that matches typical helm and dash hardware, so it installs cleanly without looking out of place. Because it is purpose-built for the SS1250V and SS1275V helm models, it is sized and configured to thread directly into the fill and vent ports on those units without modification. This kit is a practical item to have on hand for boat builders, dealers, and boat owners performing steering system fills, bleeds, or fluid top-offs, and it is a straightforward way to replace a lost, damaged, or corroded original fill\/vent plug on a compatible helm.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HA5450\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Helms:\u003c\/strong\u003e SS1250V, SS1275V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 12 x 10 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957801166\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HA5450 kit used for?\u003c\/strong\u003e The HA5450 is a remote fill and vent plug kit used to fill and vent the hydraulic fluid system on SS1250V and SS1275V steering helms, which is necessary to remove trapped air and maintain smooth steering response.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich helm models does the HA5450 fit?\u003c\/strong\u003e This kit is designed specifically for SS1250V and SS1275V helms; it is not intended for other SeaStar helm models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the HA5450 fill and vent plug kit have?\u003c\/strong\u003e It comes with a polished exterior finish, matching the look of typical helm and dash hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HA5450 kit weigh?\u003c\/strong\u003e The SeaStar HA5450 weighs 0.45 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the HA5450 kit?\u003c\/strong\u003e The kit ships in packaging measuring 12 x 10 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I need to vent a hydraulic steering helm?\u003c\/strong\u003e Venting removes trapped air from the hydraulic lines and helm, which prevents spongy or inconsistent steering feel; the HA5450 kit provides the fill and vent point needed to do this on SS1250V and SS1275V helms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the HA5450 to replace a lost or damaged original plug?\u003c\/strong\u003e Yes, the HA5450 is a direct replacement fill and vent plug kit for SS1250V and SS1275V helms if the original plug is lost, damaged, or corroded.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HA5450 kit genuine SeaStar equipment?\u003c\/strong\u003e Yes, the HA5450 is a genuine SeaStar part number designed and sold specifically for SS1250V and SS1275V helm units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the HA5450 kit?\u003c\/strong\u003e The HA5450 kit includes the fill and vent plug hardware needed to service the fill\/vent port on a compatible SS1250V or SS1275V helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HA5450 require any special tools to install?\u003c\/strong\u003e The HA5450 fill and vent plug threads into the existing port on SS1250V and SS1275V helms and does not require modification to the helm.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989347938523,"sku":"TEL-HA5450","price":85.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/tel-ha5450_lg__89163.1558181314.500.750.jpg?v=1785188211"},{"product_id":"dometic-seastar-hc5312-3-inboard-hydraulic-steering-cylinder-ba-125-7-atm-universal-fit","title":"SeaStar HC5312-3 Inboard Steering Cylinder, BA 125 7 ATM, Single Engine","description":"\u003cp\u003eThe SeaStar HC5312-3 is an inboard hydraulic steering cylinder, model designation BA 125 7 ATM, built for single engine inboard steering systems. It is built and certified to meet the safety and quality requirements established by the American Boat \u0026amp; Yacht Council (ABYC) and the International Standards Organization (ISO), giving boat owners a steering cylinder that meets recognized marine industry standards. The cylinder is constructed of aluminum and is made in the United States.\u003c\/p\u003e\u003cp\u003eThis cylinder connects into a single engine hydraulic steering setup and is sized for factory stock inboard installations complying with recognized cylinder volume and helm displacement requirements. When plumbing the system, SeaStar outboard-style installations use either standard-length SeaStar hose (ordered in fixed foot lengths, not field-cuttable) or a 3\/8 inch diameter copper tube and hose kit; consult SeaStar for the correct plumbing option for your installation. For dual engine applications, a SeaStar or engine manufacturer tie bar is required in addition to the cylinder.\u003c\/p\u003e\u003cp\u003eThe HC5312-3 ships as a single cylinder unit and is intended to be installed by a qualified marine technician or experienced boat owner familiar with hydraulic steering systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HC5312-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e BA 125 7 ATM, Inboard Type\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Inboard Hydraulic Steering Cylinder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Configuration:\u003c\/strong\u003e Single Engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 28.5 x 4.5 x 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e ABYC and ISO compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957900487\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HC5312-3?\u003c\/strong\u003e It is a SeaStar inboard hydraulic steering cylinder, model BA 125 7 ATM, designed for single engine inboard steering applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HC5312-3 built to any recognized safety standard?\u003c\/strong\u003e Yes, the HC5312-3 is built and certified to meet the safety and quality requirements established by the American Boat \u0026amp; Yacht Council (ABYC) and the International Standards Organization (ISO).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the HC5312-3 cylinder made from?\u003c\/strong\u003e The HC5312-3 is constructed of aluminum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HC5312-3 weigh?\u003c\/strong\u003e The HC5312-3 weighs 5.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the HC5312-3?\u003c\/strong\u003e The item dimensions of the HC5312-3 are 28.5 x 4.5 x 3.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HC5312-3 be used on a dual engine boat?\u003c\/strong\u003e For dual engine applications, a SeaStar or engine manufacturer tie bar is required in addition to the steering cylinder; the HC5312-3 is configured as a single engine cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hose or tubing options work with this steering system?\u003c\/strong\u003e SeaStar systems can be plumbed with standard-length SeaStar hose ordered in fixed foot lengths (not field-cuttable), or with a 3\/8 inch diameter copper tube and hose kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the HC5312-3 manufactured?\u003c\/strong\u003e The SeaStar HC5312-3 inboard steering cylinder is made in the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HC5312-3 suitable for a modified or high-performance installation?\u003c\/strong\u003e Standard SeaStar capacity recommendations apply to factory stock engines only; modified installations may require a higher capacity steering system than the HC5312-3, so contact SeaStar technical service if in doubt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cylinders come in the package?\u003c\/strong\u003e The HC5312-3 ships as a single steering cylinder unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the BA 125 7 ATM designation mean?\u003c\/strong\u003e BA 125 7 ATM is the model designation SeaStar uses for the HC5312-3 inboard type steering cylinder.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348167899,"sku":"TEL-HC5312-3","price":819.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71lzcNuzmJL.jpg?v=1784476982"},{"product_id":"seastar-hf5540-45-degree-hydraulic-steering-fitting-kit-stainless-steel-npt-thread-for-helm-pumps","title":"SeaStar 45 Degree Hydraulic Steering Fitting, HF5540, Stainless Steel","description":"\u003cp\u003eThe SeaStar HF5540 is a 45 degree hydraulic steering fitting built for boats running SeaStar hydraulic steering systems. It is machined from stainless steel with an NPT thread connection, giving a corrosion-resistant connector for joining steering hose or tubing runs at a 45 degree angle where a straight fitting will not route cleanly through the helm, cylinder, or bulkhead. Hydraulic steering systems depend on tight, leak-free connections to keep the system bled and responsive, and a fitting with the correct angle and thread lets the hose or tube run without kinking or placing stress on the connection point.\u003c\/p\u003e\u003cp\u003eThis fitting is intended for use with SeaStar 2-line hydraulic steering systems, including systems set up with 3\/8 inch diameter tubing or hose runs to the helm pump and cylinder. It is sold as a single fitting (Manufacturer Part Number HF5540) so it can be added or replaced individually without buying a full hose or tube kit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HF5540\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Steering Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Angle:\u003c\/strong\u003e 45 Degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.5 x 5 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957881632\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eIntended for SeaStar 2-line hydraulic steering systems using 3\/8 inch diameter tubing or hose runs, including systems built around the HC5332 cylinder.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat angle is the HF5540 fitting?\u003c\/strong\u003e The HF5540 is a 45 degree fitting, used where a hydraulic steering hose or tube run needs to change direction without a sharp bend or a straight connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SeaStar HF5540 made of?\u003c\/strong\u003e It is made of stainless steel, chosen for corrosion resistance in a marine hydraulic steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type does the HF5540 use?\u003c\/strong\u003e It uses an NPT thread connection for joining to hydraulic steering hose or tube fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size tubing does this fitting work with?\u003c\/strong\u003e The HF5540 is intended for use in SeaStar 2-line hydraulic steering systems built with 3\/8 inch diameter tubing or hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HF5540 fit SeaStar 2.4 systems and the HC5332 cylinder?\u003c\/strong\u003e Yes, SeaStar 2.4 hydraulic steering systems and systems using the HC5332 cylinder are among the applications this fitting size and type is used on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the HF5540?\u003c\/strong\u003e The HF5540 measures 0.5 x 5 x 8 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HF5540 weigh?\u003c\/strong\u003e This fitting weighs 0.16 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HF5540 sold as a single fitting or as part of a kit?\u003c\/strong\u003e It is sold as a single 45 degree fitting, Manufacturer Part Number HF5540, so it can be purchased on its own rather than as part of a full hose or tube kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine SeaStar part?\u003c\/strong\u003e Yes, the HF5540 is a genuine SeaStar branded hydraulic steering fitting, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the HF5540 fitting?\u003c\/strong\u003e The HF5540 is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HF5540 be used to replace a damaged or leaking fitting in an existing SeaStar steering system?\u003c\/strong\u003e Yes, because it is sold individually, the HF5540 can be used to replace a single damaged or leaking 45 degree fitting in a SeaStar 2-line hydraulic steering setup without replacing the entire hose or tube run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the HF5540?\u003c\/strong\u003e You receive one SeaStar HF5540 45 degree stainless steel fitting.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348200667,"sku":"TEL-HF5540","price":24.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/tel-hf5540__18073.1558181097.500.750.jpg?v=1785188001"},{"product_id":"seastar-hf6004-orb-fitting-kit-90-degree-elbow-stainless-steel-hydraulic-steering-fittings-2-piece","title":"SeaStar ORB Fitting Kit, 90 Degree Elbow, Stainless Steel, HF6004","description":"\u003cp\u003eThe SeaStar HF6004 ORB Fitting Kit provides the 90 degree elbow fittings used to complete hydraulic steering system connections. Each kit includes 2 pieces of O-ring boss (ORB) fittings machined from stainless steel with a silver stainless steel exterior finish for corrosion resistance in the marine environment. The fittings use a 0.375 inch NPT thread and are configured as a 90 degree elbow connector, allowing hydraulic steering hoses to be routed around tight engine bay or helm installations without kinking. This is a universal fit kit, making it suitable across SeaStar hydraulic steering setups that call for this fitting size and thread type. The kit measures 8 x 4 x 8 inches and weighs 0.24 pounds, and is backed by a limited manufacturer warranty. Boat owners and installers use this kit when building out or servicing a hydraulic steering line, replacing a damaged or leaking elbow fitting, or adding a fitting connection point during a steering system installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HF6004\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e ORB Fitting Kit, 90 Deg. Elbow, SS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet Name:\u003c\/strong\u003e ORB Fitting Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 8 x 4 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.24 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957911681\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SeaStar HF6004 ORB Fitting Kit?\u003c\/strong\u003e The HF6004 kit includes 2 pieces of 90 degree elbow ORB (O-ring boss) fittings machined from stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size and type does the HF6004 fitting use?\u003c\/strong\u003e The HF6004 fitting uses a 0.375 inch NPT thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle is the HF6004 fitting?\u003c\/strong\u003e It is a 90 degree elbow connector, used to route hydraulic steering hose around tight spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the HF6004 ORB Fitting Kit made from?\u003c\/strong\u003e SeaStar HF6004 fittings are made from stainless steel with a silver stainless steel exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HF6004 fitting kit weigh?\u003c\/strong\u003e The kit weighs 0.24 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the HF6004 kit?\u003c\/strong\u003e Item dimensions for the HF6004 kit are 8 x 4 x 8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HF6004 fit a specific boat or engine model?\u003c\/strong\u003e HF6004 is listed as a universal fit fitting kit rather than being tied to a specific make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the SeaStar HF6004 manufactured?\u003c\/strong\u003e The HF6004 ORB Fitting Kit has a country of origin of Canada.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HF6004 fitting kit covered by a warranty?\u003c\/strong\u003e Yes, HF6004 is backed by a limited manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in one HF6004 kit?\u003c\/strong\u003e One HF6004 kit contains 2 fitting pieces.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348266203,"sku":"TEL-HF6004","price":47.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/TEL-HF6004__53850.1729630690.500.750.jpg?v=1785188211"},{"product_id":"seastar-hc5345-3-front-mount-outboard-hydraulic-steering-cylinder-8-34-cu-in-abyc-nmma-certified-twin-triple-engine-tilt","title":"SeaStar HC5345-3 Front Mount Outboard Steering Cylinder, 8.34 Cubic Inch, Single Engine","description":"\u003cp\u003eThe SeaStar HC5345-3 is a front mount hydraulic steering cylinder built for single-engine outboard boats. It connects the helm to the outboard's steering arm, converting hydraulic pressure from the helm pump into the mechanical force that turns the engine. The cylinder has an 8.34 cubic inch volume capacity and uses positionable stainless steel O-ring (ORB) fittings, which allow the hydraulic hose connections to be angled for easier routing during installation. Its end gland sealing system uses an 8-hole design intended to improve serviceability and to better resist repeated compression set in the marine environment. The cylinder also provides independent engine tilt, which is required for twin and triple engine installations even when only one cylinder is in use per engine.\u003c\/p\u003e\u003cp\u003eThe HC5345-3 is built and certified to meet standards established by the American Boat and Yacht Council (ABYC) and the International Standards Organization (ISO), and it meets ABYC and NMMA certification requirements. It is suited to cruisers, runabouts, center console boats, and offshore fishing boats. The cylinder is compatible with the SeaStar Power Assist pump (PA1200-2) for boats that want a lighter, automotive-style steering feel. SeaStar hydraulic steering systems, including this cylinder, are tested and certified for use with SeaStar hydraulic fluid and SeaStar hydraulic hoses; using non-certified fluid or hoses with this cylinder may void the warranty and could result in loss of steering control. The product is designed and manufactured in North America and is backed by a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HC5345-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e HC53453\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard Front Mount (O\/B FM) Power\/Manual Steering Cylinder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Type:\u003c\/strong\u003e Outboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Engine Mount, Front Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Application:\u003c\/strong\u003e Single engine installations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume Capacity:\u003c\/strong\u003e 8.34 cubic inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Horsepower Rating:\u003c\/strong\u003e 350 horsepower\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings:\u003c\/strong\u003e Positionable stainless steel O-ring (ORB) fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing System:\u003c\/strong\u003e 8-hole end gland sealing system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ABYC and NMMA certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Upgrade:\u003c\/strong\u003e SeaStar Power Assist pump (PA1200-2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957916754\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user warranty against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eIntended for single-engine outboard-powered boats not exceeding 75 mph, not running surface-piercing props, and not exceeding the maximum U.S. Coast Guard horsepower rating for the vessel. Maximum horsepower rating of 350 horsepower.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HC5345-3 used for?\u003c\/strong\u003e The HC5345-3 is a front mount hydraulic steering cylinder that connects the helm pump to a single outboard engine's steering arm, converting hydraulic pressure into the mechanical motion that steers the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HC5345-3 rated for twin or triple engine setups?\u003c\/strong\u003e The HC5345-3 is designed for single engine installations, though its independent engine tilt feature is also relevant on twin and triple engine boats where one cylinder is used per engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the volume capacity of this steering cylinder?\u003c\/strong\u003e The SeaStar HC5345-3 has an 8.34 cubic inch volume capacity, which factors into the number of helm turns lock-to-lock along with the helm selected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower rating for the HC5345-3?\u003c\/strong\u003e This cylinder is rated for outboard engines up to 350 horsepower.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fittings does the HC5345-3 use?\u003c\/strong\u003e It uses positionable stainless steel O-ring (ORB) fittings, which can be angled during installation to make hydraulic hose routing easier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HC5345-3 weigh?\u003c\/strong\u003e The HC5345-3 steering cylinder weighs 9.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HC5345-3 be used with a power steering system?\u003c\/strong\u003e Yes, the HC5345-3 is compatible with the SeaStar Power Assist pump (PA1200-2), which provides an automotive-style, fingertip-control steering feel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HC5345-3 differ from SeaStar's splashwell mount cylinder?\u003c\/strong\u003e Yes, the HC5345-3 is a front mount cylinder, which is distinct from SeaStar's splashwell mount cylinder (a different part number); the splashwell mount cylinder is not suitable for engines fitted with factory power steering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat certifications does the HC5345-3 meet?\u003c\/strong\u003e The HC5345-3 is built and certified to meet ABYC and ISO safety and quality standards and meets ABYC and NMMA certification requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fluid and hoses should be used with the HC5345-3?\u003c\/strong\u003e SeaStar hydraulic steering systems, including the HC5345-3 cylinder, are tested and certified for use only with SeaStar hydraulic fluid and SeaStar hydraulic hoses; using non-certified products may void the warranty and could cause loss of steering control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the HC5345-3?\u003c\/strong\u003e SeaStar backs the HC5345-3 with a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat types is the HC5345-3 suited for?\u003c\/strong\u003e The HC5345-3 is intended for cruisers, runabouts, center console boats, and offshore fishing boats with a single outboard engine.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348298971,"sku":"TEL-HC5345-3","price":891.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SeaStar-HC5345-3-Outboard-Steering-Cylinder__52830.1724258351.500.750.jpg?v=1785188192"},{"product_id":"seastar-hf6007-orb-fitting-kit-for-manual-hydraulic-steering-add-second-helm-outboard-with-5-orb-straight-and-tee-fittings","title":"SeaStar HF6007 Add-A-Station\/Autopilot Fitting Kit, 3\/8 Inch ORB Compression Fittings","description":"\u003cp\u003eThe SeaStar HF6007 Add-A-Station\/Autopilot Fitting Kit supplies the compression fittings needed to add a second helm station or an autopilot connection to a SeaStar manual hydraulic steering system. All SeaStar manual hydraulic steering systems use the same style of fitting across applications, so this kit uses the same 3\/8 inch compression fitting design with a 9\/16-24 extra fine thread and a -5 ORB (O-ring boss) connection found throughout the SeaStar hydraulic line.\u003c\/p\u003e\u003cp\u003eThe kit contains two straight fittings (3\/8 inch tube, -5 ORB) and two tee fittings (2 x 3\/8 inch tube, -5 ORB), giving an installer the parts needed to branch an existing hydraulic steering line to a new station or autopilot pump without replacing the whole hose run. Fitting bodies are black plastic. Because the fitting style is common across the SeaStar manual hydraulic steering line, this kit is intended for use with SeaStar manual hydraulic steering systems generally rather than one specific helm or cylinder model.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HF6007\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Type:\u003c\/strong\u003e Add-A-Station\/Autopilot Fitting Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Style:\u003c\/strong\u003e ORB (O-ring boss), -5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Size:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 9\/16-24 extra fine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e 2 Straight Fittings (3\/8 inch tube, -5 ORB), 2 Tee Fittings (2 x 3\/8 inch tube, -5 ORB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957919090\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits SeaStar manual hydraulic steering systems, which use the same style of fitting across applications.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SeaStar HF6007 Add-A-Station\/Autopilot Fitting Kit include?\u003c\/strong\u003e The kit includes two straight fittings (3\/8 inch tube, -5 ORB) and two tee fittings (2 x 3\/8 inch tube, -5 ORB), the fittings needed to branch a SeaStar hydraulic steering line for a second station or autopilot connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread and tube size do the HF6007 fittings use?\u003c\/strong\u003e They use a 3\/8 inch compression tube fitting with a 9\/16-24 extra fine thread and a -5 ORB (O-ring boss) connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fitting kit work with any SeaStar manual hydraulic steering system?\u003c\/strong\u003e Yes. SeaStar manual hydraulic steering systems all use the same style of fitting across applications, so the HF6007 fitting kit is compatible with SeaStar manual hydraulic steering lines generally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the HF6007 fittings made from?\u003c\/strong\u003e The fitting bodies in the SeaStar HF6007 kit are black plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HF6007 kit used to add a second helm station or an autopilot?\u003c\/strong\u003e Both. The SeaStar HF6007 is labeled as an Add-A-Station\/Autopilot Fitting Kit, meaning it supplies the fittings for tapping into an existing hydraulic steering line to add either a second helm station or an autopilot pump connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fittings come in the HF6007 kit, and what type is each?\u003c\/strong\u003e There are four fittings total: two straight fittings (3\/8 inch tube, -5 ORB) and two tee fittings (2 x 3\/8 inch tube, -5 ORB).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HF6007 kit include hydraulic hose?\u003c\/strong\u003e No hose length is specified for the HF6007 kit; it supplies the straight and tee compression fittings only, for connecting into an existing SeaStar hydraulic steering line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the SeaStar HF6007 fitting kit?\u003c\/strong\u003e The SeaStar HF6007 Add-A-Station\/Autopilot Fitting Kit weighs 2.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a tee fitting or a straight fitting used to branch off an existing hydraulic line?\u003c\/strong\u003e The tee fitting (part of the HF6007 kit, 2 x 3\/8 inch tube, -5 ORB) is used to branch a line to add a station or autopilot, while the straight fittings (3\/8 inch tube, -5 ORB) connect a single run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the fittings in the HF6007 kit?\u003c\/strong\u003e The fittings in the SeaStar HF6007 kit are black.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348364507,"sku":"TEL-HF6007","price":215.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/tel-hf6007_lg__39028.1558181209.500.750.jpg?v=1785188110"},{"product_id":"seastar-baystar-1-1-front-mount-hydraulic-helm-hh4311-4-compact-marine-boat-steering-pump-with-3-4in-tapered-shaft","title":"SeaStar BayStar 1.1 Front Mount Hydraulic Helm HH4311-4, Compact Cylinder, 3\/4 Inch Tapered Shaft","description":"\u003cp\u003eThe SeaStar BayStar HH4311-4 is a front mount hydraulic steering helm built around a balanced, compact-design cylinder that fits most splashwells and delivers full engine movement. It is part of the BayStar 1.1 helm line and is packaged as a complete kit rather than a bare helm, so everything needed for the installation ships together: the helm, the cylinder, fittings, tubing, oil, a fill kit, and detailed instructions.\u003c\/p\u003e\u003cp\u003eThe helm itself uses a compact body with only a 5 inch footprint and requires just a 3 inch dash hole, whether the boat uses a standard dash or a tilt dash. For boats that want adjustable helm position, an optional five-position tilt helm is available for this system. Steering connects via a standard 3\/4 inch tapered steering shaft, and the kit is designed for fast, easy installation without extensive modification to the helm station.\u003c\/p\u003e\u003cp\u003eThis helm system meets A.B.Y.C. (American Boat and Yacht Council) standards and N.M.M.A. (National Marine Manufacturers Association) certification requirements, so it is suitable for builders and installers who need documented compliance for hydraulic steering systems. Because the cylinder is compact and the helm footprint is small, the HH4311-4 works well on boats with limited splashwell space or tight dash mounting areas where a full-size helm would not fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HH4311-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e BayStar 1.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Front Mount Hydraulic Helm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder Type:\u003c\/strong\u003e Balanced cylinder, compact design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Shaft:\u003c\/strong\u003e 3\/4 inch tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelm Footprint:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash Hole Required:\u003c\/strong\u003e 3 inches (standard or tilt dash)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt Helm Option:\u003c\/strong\u003e Optional five-position tilt helm available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e Helm, cylinder, fittings, tubing, oil, fill kit, detailed instructions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e Meets A.B.Y.C. Standards; meets N.M.M.A. Certification requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957940162\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCylinder fits most splashwells and provides full engine movement\u003c\/li\u003e\n\u003cli\u003eCompatible with standard dash or optional tilt dash mounting (3 inch dash hole required)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the SeaStar HH4311-4 helm kit?\u003c\/strong\u003e The HH4311-4 ships as a complete kit containing the helm, the cylinder, fittings, tubing, oil, a fill kit, and detailed installation instructions, so no separate hydraulic components need to be purchased.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much dash space does the HH4311-4 helm need?\u003c\/strong\u003e This front mount helm has only a 5 inch footprint and needs just a 3 inch dash hole, whether the dash is a standard type or a tilt dash.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HH4311-4 support a tilt helm?\u003c\/strong\u003e Yes, an optional five-position tilt helm is available for use with the HH4311-4 system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering shaft does the HH4311-4 use?\u003c\/strong\u003e It uses a standard 3\/4 inch tapered steering shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HH4311-4 cylinder compatible with most splashwells?\u003c\/strong\u003e Yes, the balanced, compact-design cylinder included with the HH4311-4 fits most splashwells and still provides full engine movement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SeaStar HH4311-4 certified for marine use?\u003c\/strong\u003e The HH4311-4 helm system meets A.B.Y.C. Standards and N.M.M.A. Certification requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HH4311-4 helm kit weigh?\u003c\/strong\u003e The complete SeaStar BayStar HH4311-4 kit weighs 7.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HH4311-4 easy to install?\u003c\/strong\u003e Yes, it is designed for fast, easy installation and is packaged complete with all fittings, tubing, and instructions needed for the job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HH4311-4 a bare helm or a full steering kit?\u003c\/strong\u003e HH4311-4 is a full kit, not just a bare helm; it includes the front mount helm, compact cylinder, fittings, tubing, oil, and a fill kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the compact cylinder's design advantage?\u003c\/strong\u003e The cylinder included with the HH4311-4 is a balanced design with a compact size, which is what allows it to fit most splashwells while still delivering full engine movement.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348397275,"sku":"TEL-HH4311-4","price":553.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41x92VuuWOL.jpg?v=1784477026"},{"product_id":"seastar-baystar-1-4-hydraulic-outboard-steering-kit-hh4314-4-compact-balanced-cylinder-front-mount-helm-fits-most-splashwells","title":"SeaStar BayStar 1.4 Front Mount Hydraulic Helm Kit HH4314-4 with Compact Cylinder","description":"\u003cp\u003eThe SeaStar HH4314-4 is a complete BayStar 1.4 front mount hydraulic steering system built around a balanced cylinder with a compact design. The balanced cylinder construction fits most splashwells while still providing full engine movement, making it a practical choice for boats where transom space is tight. The compact helm has only a 5 inch footprint and needs only a 3 inch dash hole, so it installs cleanly into a standard or tilt dash cutout without major modification. An optional five position tilt helm is also available for this system.\u003c\/p\u003e\u003cp\u003eThis kit ships packaged complete: helm, cylinder, fittings, tubing, oil, a fill kit, and detailed instructions are all included, so installation is fast and straightforward without sourcing separate hydraulic components. The helm uses a standard 3\/4 inch tapered steering shaft. The kit consists of the BayStar 1.4 Front Mount Helm (HH4314-3) paired with the BayStar Compact Cylinder (HC4645H). The system meets A.B.Y.C. Standards and N.M.M.A. Certification requirements, confirming it is built to recognized marine safety and performance benchmarks.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HH4314-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e BayStar 1.4 Front Mount Helm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder Included:\u003c\/strong\u003e BayStar Compact Cylinder (HC4645H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelm Included:\u003c\/strong\u003e BayStar 1.4 Front Mount Helm (HH4314-3)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder Type:\u003c\/strong\u003e Balanced cylinder, compact design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelm Footprint:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash Hole Required:\u003c\/strong\u003e 3 inches (standard or tilt)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Shaft:\u003c\/strong\u003e 3\/4 inch tapered, standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt Option:\u003c\/strong\u003e Optional five position tilt helm available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Helm, cylinder, fittings, tubing, oil, fill kit, detailed instructions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e Meets A.B.Y.C. Standards; meets N.M.M.A. Certification requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.6 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned to fit most splashwell configurations while providing full engine movement; consult the kit instructions to confirm compatibility with your specific boat.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the SeaStar HH4314-4 helm kit?\u003c\/strong\u003e The HH4314-4 kit is packaged complete with the helm, cylinder, fittings, tubing, oil, a fill kit, and detailed instructions, so no separate hydraulic parts need to be purchased.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HH4314-4 include the cylinder or just the helm?\u003c\/strong\u003e Yes, this kit includes both components: the BayStar 1.4 Front Mount Helm (HH4314-3) and the BayStar Compact Cylinder (HC4645H), packaged together as one complete steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much dash space does the BayStar 1.4 helm need?\u003c\/strong\u003e The compact helm in the HH4314-4 kit has only a 5 inch footprint and requires just a 3 inch dash hole, whether the dash is standard or tilt style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a tilt helm available for this system?\u003c\/strong\u003e Yes, an optional five position tilt helm is available for the BayStar 1.4 system in addition to the standard front mount helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering shaft does the HH4314-4 use?\u003c\/strong\u003e This system uses a standard 3\/4 inch tapered steering shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of cylinder comes with the HH4314-4?\u003c\/strong\u003e The kit includes a balanced cylinder with a compact design, specifically the BayStar Compact Cylinder (HC4645H), which fits most splashwells while still providing full engine movement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cylinder fit my boat's splashwell?\u003c\/strong\u003e The BayStar Compact Cylinder included in the HH4314-4 kit is designed to fit most splashwells while providing full engine movement, though the kit instructions should be checked to confirm fit on a specific boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HH4314-4 helm kit weigh?\u003c\/strong\u003e The complete SeaStar HH4314-4 kit weighs 7.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HH4314-4 certified for marine use?\u003c\/strong\u003e Yes, the HH4314-4 steering kit meets A.B.Y.C. Standards and meets N.M.M.A. Certification requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HH4314-4 easy to install?\u003c\/strong\u003e The HH4314-4 is designed for fast, easy installation, arriving as a complete packaged kit with all fittings, tubing, oil, and detailed instructions included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is the HH4314-4 helm kit?\u003c\/strong\u003e The HH4314-4 is a SeaStar product, part of the BayStar 1.4 Front Mount Helm line.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348462811,"sku":"TEL-HH4314-4","price":553.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_b1188a9b-1444-40af-adc1-e61500d63e74.jpg?v=1785348990"},{"product_id":"dometic-seastar-hh5271-4-helm-1-7-fm-orb-front-mount-hydraulic-steering-helm-pump","title":"SeaStar Helm 1.7 FM ORB Hydraulic Steering Helm, HH5271-4","description":"\u003cp\u003eThe SeaStar Helm 1.7 (HH5271-4) is a low friction hydraulic steering helm built for sterndrive boats. It is the standard recommended helm for both non-power and power steered factory stock sterndrive applications, giving boaters a smooth, predictable steering feel at the wheel. The helm uses an FM ORB port fitting and is designed to work with 3\/8 inch diameter nylon tubing (Part No. HT5xxx) as part of a complete SeaStar 1.7 hydraulic steering system.\u003c\/p\u003e\u003cp\u003eBecause it relies on a low friction hydraulic design, the SeaStar Helm 1.7 reduces steering effort compared to mechanical cable systems, while remaining compatible with both non-power assisted and power assisted setups. Boaters running factory stock sterndrive configurations who want faster steering response in a power steered application can instead consider a SeaStar 2.4 helm, but for standard non-power and power steered installations the 1.7 is the baseline recommendation. Note that modified installations may require a higher capacity steering system, so confirm your setup matches factory stock specifications before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HH5271-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Helm Pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering System:\u003c\/strong\u003e SeaStar 1.7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Fitting:\u003c\/strong\u003e FM ORB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Tubing:\u003c\/strong\u003e 3\/8 inch diameter nylon tubing, Part No. HT5xxx\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 11.2 x 5.3 x 5.9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions (L x W x H):\u003c\/strong\u003e 11.26 x 5.67 x 5.35 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.61 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7315091535816\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar Helm 1.7 (HH5271-4) used for?\u003c\/strong\u003e The HH5271-4 is a low friction hydraulic steering helm used in factory stock sterndrive boat steering systems, serving as the wheel-side component that drives the hydraulic steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SeaStar Helm 1.7 work with power steering?\u003c\/strong\u003e Yes, the SeaStar 1.7 helm is the standard recommendation for both non-power and power steered sterndrive applications, so the HH5271-4 works in either configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat port fitting does the HH5271-4 helm use?\u003c\/strong\u003e The SeaStar Helm 1.7, part number HH5271-4, uses an FM ORB port fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tubing is required for the SeaStar Helm 1.7?\u003c\/strong\u003e SeaStar 1.7 systems, including the HH5271-4 helm, use 3\/8 inch diameter nylon tubing, listed under Part No. HT5xxx.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar Helm 1.7 helm weigh?\u003c\/strong\u003e The HH5271-4 SeaStar Helm 1.7 weighs 7.61 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the HH5271-4 helm?\u003c\/strong\u003e The SeaStar Helm 1.7 (HH5271-4) measures 11.2 x 5.3 x 5.9 inches, with a package size of 11.26 x 5.67 x 5.35 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the SeaStar 1.7 and SeaStar 2.4 helm?\u003c\/strong\u003e The SeaStar 1.7, such as the HH5271-4, is the standard recommendation for non-power and power steered applications, while a SeaStar 2.4 helm can be specified for power steered applications where faster steering response is desired.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SeaStar Helm 1.7 suitable for modified sterndrive installations?\u003c\/strong\u003e The HH5271-4 SeaStar Helm 1.7 recommendation applies to factory stock sterndrives only; modified installations may require a higher capacity steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the HH5271-4 steering helm?\u003c\/strong\u003e The HH5271-4 is a SeaStar Helm 1.7, part of the SeaStar hydraulic steering line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is the HH5271-4?\u003c\/strong\u003e The HH5271-4 SeaStar Helm 1.7 is categorized as a helm pump within a hydraulic boat steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar Helm 1.7?\u003c\/strong\u003e The UPC for the HH5271-4 SeaStar Helm 1.7 is 7315091535816.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348561115,"sku":"TEL-HH5271-4","price":757.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71otWhIGPwL.jpg?v=1784477044"},{"product_id":"seastar-hh5263-4-rear-mount-hydraulic-steering-helm-pump-for-marine-boats","title":"SeaStar HH5263-4 Rear Mount Hydraulic Steering Helm Pump","description":"\u003cp\u003eThe SeaStar HH5263-4 is a rear mount hydraulic steering helm pump for boats using a SeaStar hydraulic steering system. As the helm unit, it is the component mounted behind the dash that the steering wheel turns to send hydraulic pressure through the system's tubing to the outboard or sterndrive cylinder, converting wheel input into steering motion at the drive. The rear mount configuration positions the helm body behind the panel rather than through a front-facing bezel, which suits helm layouts where rear access and mounting space are available.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HH5263-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Helm Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Rear Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.71 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7315091535885\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of steering component is the SeaStar HH5263-4?\u003c\/strong\u003e It is a hydraulic steering helm pump, the unit mounted behind the dash that a boat's steering wheel turns to send hydraulic pressure to the steering cylinder at the drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HH5263-4 a front mount or rear mount helm?\u003c\/strong\u003e The HH5263-4 is a rear mount helm pump, meaning it mounts behind the dash panel rather than through a front-facing bezel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar HH5263-4 helm pump weigh?\u003c\/strong\u003e This helm pump weighs 8.71 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HH5263-4 a genuine SeaStar part number?\u003c\/strong\u003e Yes, HH5263-4 is the SeaStar manufacturer part number for this rear mount helm pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is the HH5263-4 helm pump?\u003c\/strong\u003e It is manufactured by SeaStar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar HH5263-4?\u003c\/strong\u003e The UPC for this SeaStar helm pump is 7315091535885.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product category does the HH5263-4 fall under?\u003c\/strong\u003e The HH5263-4 is categorized as a helm pump within SeaStar's hydraulic steering line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HH5263-4 come with hydraulic tubing or fluid?\u003c\/strong\u003e Specific included accessories such as tubing or hydraulic fluid are not specified for the HH5263-4 helm pump; confirm with your installer what additional components your system requires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a rear mount helm pump do compared to the steering wheel itself?\u003c\/strong\u003e The rear mount HH5263-4 helm pump is the hydraulic pump behind the wheel that converts the wheel's turning into hydraulic pressure sent to the steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HH5263-4 sold as a standalone helm pump?\u003c\/strong\u003e Yes, the HH5263-4 is the rear mount SeaStar helm pump unit itself, identified by its own manufacturer part number.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348593883,"sku":"TEL-HH5263-4","price":771.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_b297aad1-f66b-4ddc-8baf-76341bef4443.jpg?v=1785348990"},{"product_id":"seastar-helm-20-hydraulic-steering-helm-pump-hh5273-4-for-marine-boat-steering-systems","title":"SeaStar Helm 20 Hydraulic Steering Helm Pump - HH5273-4","description":"\u003cp\u003eThe SeaStar Helm 20 is a hydraulic steering helm pump, part number HH5273-4, from SeaStar's Helm Pumps line. As the helm component of a hydraulic steering system, it mounts behind the steering wheel and converts wheel rotation into hydraulic pressure that is directed through the system's hoses to the steering cylinder, moving the boat's outboard or sterndrive in response to wheel input. It serves as the operator-side unit in a SeaStar hydraulic steering setup, working alongside the system's helm pump, hoses, and steering cylinder to deliver steering control at the helm station.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HH5273-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Helm 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Helm Pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7315091535830\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HH5273-4?\u003c\/strong\u003e The HH5273-4 is a genuine SeaStar Helm 20 hydraulic steering helm pump, the wheel-side unit of a SeaStar hydraulic steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar Helm 20 helm pump weigh?\u003c\/strong\u003e The SeaStar Helm 20, part number HH5273-4, weighs 7.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HH5273-4 a genuine SeaStar part?\u003c\/strong\u003e Yes, HH5273-4 is a genuine SeaStar Helm 20 product, not an aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product category does HH5273-4 fall under?\u003c\/strong\u003e HH5273-4 is listed under SeaStar's Helm Pumps category as part of the Helm 20 product line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a hydraulic steering helm pump like the SeaStar Helm 20 do?\u003c\/strong\u003e It mounts at the helm station and converts steering wheel rotation into hydraulic pressure that is routed to the steering cylinder to turn the outboard or sterndrive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar Helm 20 HH5273-4?\u003c\/strong\u003e The UPC for the SeaStar Helm 20, part number HH5273-4, is 7315091535830.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SeaStar Helm 20 work as a standalone steering solution?\u003c\/strong\u003e No, the HH5273-4 helm pump is one component of a complete SeaStar hydraulic steering system, which also requires hoses and a steering cylinder matched to the boat's setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does the SeaStar Helm 20 mount on a boat?\u003c\/strong\u003e The HH5273-4 helm pump mounts behind the steering wheel at the helm station, where it is connected to the rest of the hydraulic steering system.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348659419,"sku":"TEL-HH5273-4","price":937.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_83023746-4621-492c-a505-e3ecbc641686.jpg?v=1785348998"},{"product_id":"seastar-hh5272-4-seastar-2-4-front-mount-helm-with-orb-fittings-for-hydraulic-outboard-steering","title":"SeaStar HH5272-4 Front Mount 2.4 Hydraulic Steering Helm with ORB Fittings","description":"\u003cp\u003eThe SeaStar HH5272-4 is a front-mount 2.4 hydraulic steering helm designed for single-cylinder outboard steering systems. As a 2.4 helm, it is built for applications where faster steering response is wanted compared to a standard 1.7 helm, and it is commonly specified for power-steered setups where quicker response at the wheel matters. The front-of-dash fill design allows for convenient servicing without pulling the helm, and the compact housing needs only a 3 inch dash hole, making it possible to retrofit into an older SeaStar 4.5 inch hole cutout without cutting a new opening in the dash.\u003c\/p\u003e\u003cp\u003eHose connections use positionable stainless steel O-ring boss (ORB) fittings, which let the installer rotate the fitting to the routing angle that works best for the boat's hose runs before final tightening, simplifying installation in tight helm stations. In typical single-cylinder outboard applications, the helm turns 3.5 times lock-to-lock. The compact footprint keeps the helm unobtrusive behind the dash while still housing the full hydraulic pump mechanism needed to drive the steering cylinder.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HH5272-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Front Mount Hydraulic Steering Helm, 2.4 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Positionable stainless steel ORB (O-ring boss) fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurns Lock-to-Lock:\u003c\/strong\u003e 3.5 turns in most typical single cylinder outboard applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash Hole Required:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetrofit Compatibility:\u003c\/strong\u003e Fits an existing SeaStar 4.5 inch hole cutout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootprint:\u003c\/strong\u003e 4-7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 11 x 5.75 x 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Uses:\u003c\/strong\u003e Sailing, Motorboating, Jet Ski\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7315091535823\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for single-cylinder outboard steering systems using a SeaStar hydraulic steering setup; verify cylinder and helm compatibility with your existing SeaStar system before ordering.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HH5272-4?\u003c\/strong\u003e It is a front mount SeaStar 2.4 hydraulic steering helm, part number HH5272-4, built for single-cylinder outboard steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does the HH5272-4 have?\u003c\/strong\u003e In most typical single cylinder outboard applications, the HH5272-4 turns 3.5 times lock-to-lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size dash hole does this helm need?\u003c\/strong\u003e The HH5272-4 needs only a 3 inch dash hole and can be retrofitted into an existing SeaStar 4.5 inch hole cutout, so a larger dash opening does not need to be re-cut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of hose fittings does the HH5272-4 use?\u003c\/strong\u003e It uses positionable stainless steel ORB (O-ring boss) fittings, which can be rotated to the desired routing angle before the hoses are tightened down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a 1.7 or 2.4 SeaStar helm?\u003c\/strong\u003e The HH5272-4 is a SeaStar 2.4 helm, which is specified over the standard 1.7 helm when faster steering response is wanted, including in power steered applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HH5272-4 weigh?\u003c\/strong\u003e The SeaStar HH5272-4 weighs 7.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the helm?\u003c\/strong\u003e The HH5272-4 measures 11 x 5.75 x 5.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HH5272-4 be used on a jet ski or sailboat?\u003c\/strong\u003e Yes, this SeaStar 2.4 helm is suited to sailing, motorboating, and jet ski applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HH5272-4 work with a power steering system?\u003c\/strong\u003e SeaStar 2.4 helms like the HH5272-4 can be specified for power steered applications where faster steering response is desired.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HH5272-4 a front mount or side mount helm?\u003c\/strong\u003e It is a front mount helm, with fill access at the front of the dash for easier servicing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the compact footprint of the HH5272-4 measure?\u003c\/strong\u003e The helm has a compact 4-7\/16 inch footprint, keeping it unobtrusive behind the dash.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the HH5272-4 different from a SeaStar 1.7 helm?\u003c\/strong\u003e The HH5272-4 is a 2.4 series helm intended for faster steering response than a 1.7 helm, which is the standard recommendation for both non-power and power steered applications with more moderate response needs.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348724955,"sku":"TEL-HH5272-4","price":1032.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61wZtKFHLAL.jpg?v=1784477077"},{"product_id":"seastar-pro-helm-pump-hh5779-4-for-hydraulic-outboard-steering-high-speed-balanced-cylinder-systems","title":"SeaStar Pro Helm 17 Hydraulic Steering Helm, Part Number HH5779-4","description":"\u003cp\u003eThe SeaStar Pro Helm 17 (part number HH5779-4) is a hydraulic steering helm pump built for boats running a SeaStar hydraulic steering system. As part of SeaStar's PRO helm line, it is designed to work with SeaStar Power Assist PRO systems rather than the standard Power Assist system used with non-PRO helms, so make sure any power assist unit paired with this helm is the PRO version. The helm is the pump station at the wheel that generates the hydraulic pressure sent through the steering lines to the cylinder at the outboard or sterndrive, giving the operator direct, responsive control at the helm station.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HH5779-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Pro Helm 17\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Helm Pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.58 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7315091535922\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HH5779-4?\u003c\/strong\u003e HH5779-4 is the manufacturer part number for the SeaStar Pro Helm 17, a hydraulic steering helm pump used as the wheel-side component of a SeaStar hydraulic steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this helm work with a standard Power Assist unit?\u003c\/strong\u003e No. The SeaStar Pro Helm 17 (HH5779-4) is part of the PRO helm line, and SeaStar specifies that PRO helms should be paired with SeaStar Power Assist PRO systems rather than the standard Power Assist system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HH5779-4 helm weigh?\u003c\/strong\u003e The SeaStar Pro Helm 17 weighs 7.58 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is the SeaStar Pro Helm 17?\u003c\/strong\u003e It is listed under Helm Pumps, meaning it is the steering pump mounted at the helm station rather than the cylinder mounted at the engine or drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HH5779-4 a genuine SeaStar part?\u003c\/strong\u003e Yes, HH5779-4 is the manufacturer part number assigned by SeaStar to the Pro Helm 17.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar Pro Helm 17?\u003c\/strong\u003e The UPC associated with the SeaStar Pro Helm 17 (HH5779-4) is 7315091535922.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Pro Helm 17 be used on a dual engine boat?\u003c\/strong\u003e The SeaStar Pro Helm 17 is a helm pump used at the wheel; for dual engine setups SeaStar's hydraulic steering system also requires an appropriate tie bar or hydraulic tie bar arrangement between the two cylinders, which is a separate component from the helm itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat distinguishes the 'Pro' designation on this helm?\u003c\/strong\u003e The 'Pro' in SeaStar Pro Helm 17 (HH5779-4) indicates it belongs to SeaStar's PRO helm line, which is matched with SeaStar's PRO-specific Power Assist systems rather than the standard Power Assist line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HH5779-4 the pump or the steering cylinder?\u003c\/strong\u003e HH5779-4 is the helm pump, the unit mounted behind the wheel; it is not the hydraulic steering cylinder mounted at the engine or drive.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348823259,"sku":"TEL-HH5779-4","price":690.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_4309252d-3008-40ea-86f9-b4812d4c9ff0.jpg?v=1785348998"},{"product_id":"seastar-hh6543-4-helm-2-0-classic-tilt-orb-no-feedback-rotary-steering-for-single-outboard-boats","title":"SeaStar HH6543-4 Helm 2.0 Classic Tilt Hydraulic Steering Helm, ORB Ports, All-Metal Construction","description":"\u003cp\u003eThe SeaStar HH6543-4 Helm 2.0 Classic Tilt is a hydraulic steering helm built for smooth, super-efficient control at the wheel. It is constructed of 100% metal for durable, long-term performance on the water, and its Classic Tilt design fits standard tilt steering columns for a comfortable, adjustable helm position. The helm uses ORB (O-ring boss) porting for the hydraulic hose connections, providing a secure, leak-resistant seal at the fitting points.\u003c\/p\u003e\u003cp\u003eAs the core control unit of a hydraulic steering system, the Helm 2.0 Classic Tilt translates wheel input into steering ram movement, giving the operator direct, responsive command of the vessel. It is designed as a standalone helm unit within a broader hydraulic steering setup rather than a full kit, so it is intended to be installed alongside compatible SeaStar hydraulic steering components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HH6543-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Steering Helm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt Style:\u003c\/strong\u003e Classic Tilt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Type:\u003c\/strong\u003e ORB (O-ring boss)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal (100% metal construction)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e One\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 16.6 x 5.5 x 7.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12.63 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7315091536073\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HH6543-4?\u003c\/strong\u003e HH6543-4 is a SeaStar Helm 2.0 Classic Tilt hydraulic steering helm, the wheel-side unit of a hydraulic steering system that uses ORB (O-ring boss) hose ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Classic Tilt designation mean?\u003c\/strong\u003e Classic Tilt describes the tilt steering column style this helm is built for, distinguishing it from other SeaStar helm tilt configurations such as Sport Tilt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are ORB ports on this steering helm?\u003c\/strong\u003e ORB stands for O-ring boss, a fitting style used on the HH6543-4 helm's hydraulic hose connections that seals with an O-ring rather than tapered pipe threads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the HH6543-4 helm made from?\u003c\/strong\u003e The SeaStar HH6543-4 helm is made of 100% metal construction for durability in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the HH6543-4 helm?\u003c\/strong\u003e The SeaStar Helm 2.0 Classic Tilt (HH6543-4) measures 16.6 x 5.5 x 7.6 inches (L x W x H).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HH6543-4 helm weigh?\u003c\/strong\u003e This SeaStar helm weighs 12.63 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HH6543-4 come as a complete steering kit?\u003c\/strong\u003e No, HH6543-4 is the helm unit itself; it is installed as part of a broader hydraulic steering system with compatible SeaStar hoses and a steering ram.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HH6543-4 a genuine SeaStar part?\u003c\/strong\u003e Yes, HH6543-4 is the SeaStar manufacturer part number for this Helm 2.0 Classic Tilt unit, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options are available for the HH6543-4?\u003c\/strong\u003e The SeaStar HH6543-4 Helm 2.0 Classic Tilt is offered in a single color option, listed as One.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the HH6543-4 different from a Sport Tilt helm?\u003c\/strong\u003e The HH6543-4 uses the Classic Tilt column style, whereas SeaStar's Sport Tilt helms are built for a different tilt column configuration; the two are not interchangeable.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348856027,"sku":"TEL-HH6543-4","price":989.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51VflOF0BsL.jpg?v=1784477086"},{"product_id":"seastar-1-7-sport-tilt-helm-hh6191-4-remote-fill-hydraulic-outboard-steering-single-multi-engines-up-to-350-hp","title":"SeaStar Sport Tilt Helm 1.7, Remote Fill, HH6191-4, Fits Single and Multi-Outboard Up to 350 HP","description":"\u003cp\u003eThe SeaStar HH6191-4 is a 1.7 cubic inch Sport Tilt hydraulic helm built for no-feedback steering on single and multi-outboard boats up to 350 HP, or up to 700 HP combined on counter-rotating twin outboard setups, at speeds up to 60 mph. This helm uses a remote fill design, so the hydraulic fluid reservoir is filled at a remote point rather than through the front of the dash, giving installers flexibility on tight consoles. The tilt mechanism offers 48 degrees of tilt articulation across 5 positive lock positions, so the helm can be angled to the driver's preferred position and locked securely in place. Factory-installed lubrication is applied at the factory to help ensure smooth, consistent steering feel from first install. Typical single-cylinder outboard applications turn 4.2 times lock-to-lock. The HH6191-4 is manufactured to meet A.B.Y.C. Standards and N.M.M.A. Certification requirements, and is designed and manufactured in Canada. It is suited to cruisers, runabouts, center console boats, offshore fishing boats, and similar outboard-powered boats. SeaStar hydraulic helms are tested and certified for use with SeaStar hydraulic fluid and SeaStar hydraulic hoses; use of non-certified fluid or hoses may void the warranty and could cause loss of steering control. The helm is backed by a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HH6191-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Hydraulic Tilt Helm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFill Location:\u003c\/strong\u003e Remote fill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt Articulation:\u003c\/strong\u003e 48 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock Positions:\u003c\/strong\u003e 5 positive lock positions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurns Lock-to-Lock:\u003c\/strong\u003e 4.2 turns (typical single-cylinder outboard applications)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower Rating:\u003c\/strong\u003e Up to 350 HP single outboard, up to 700 HP combined for counter-rotating twin outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Speed:\u003c\/strong\u003e 60 mph\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e A.B.Y.C. Standards, N.M.M.A. Certification requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Blend\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7315091535953\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user warranty against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSingle and multi-outboard engine applications up to 350 HP (up to 700 HP combined for counter-rotating twin outboards)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HH6191-4?\u003c\/strong\u003e The HH6191-4 is a 1.7 cubic inch SeaStar Sport Tilt hydraulic helm with a remote fill design, built for no-feedback steering on single and multi-outboard boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much horsepower can this helm handle?\u003c\/strong\u003e Up to 350 HP on a single outboard, or up to 700 HP combined when used with counter-rotating twin outboards, at speeds up to 60 mph.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does the HH6191-4 have?\u003c\/strong\u003e In typical single-cylinder outboard applications, this helm turns 4.2 times from lock to lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the hydraulic fluid reservoir filled on the HH6191-4?\u003c\/strong\u003e This is a remote fill helm, meaning the fluid reservoir is filled at a remote point rather than through the front of the dash.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HH6191-4 the same as the HH6191-3?\u003c\/strong\u003e No, the HH6191-4 is the remote fill version of the 1.7 Sport Tilt helm, while the HH6191-3 is a front-of-dash fill version; they are different part numbers, so it is important to order the correct one for your fill configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HH6191-4 tilt?\u003c\/strong\u003e The helm offers 48 degrees of tilt articulation with 5 positive lock positions to hold the desired angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this helm certified for marine use?\u003c\/strong\u003e Yes, the HH6191-4 is designed to meet A.B.Y.C. Standards and N.M.M.A. Certification requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HH6191-4 weigh?\u003c\/strong\u003e The SeaStar HH6191-4 Sport Tilt Helm weighs 14.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fluid and hoses should be used with the HH6191-4?\u003c\/strong\u003e SeaStar hydraulic helms, including the HH6191-4, are tested and certified using SeaStar hydraulic fluid and SeaStar hydraulic hoses; using non-certified fluid or hoses may void the warranty and could cause loss of steering control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the HH6191-4 suitable for?\u003c\/strong\u003e This helm is suited to cruisers, runabouts, center console boats, offshore fishing boats, and similar single or multi-outboard powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HH6191-4 come pre-lubricated?\u003c\/strong\u003e Yes, factory-installed lubrication is applied to the HH6191-4 to help ensure smooth steering feel from installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the HH6191-4?\u003c\/strong\u003e The HH6191-4 is backed by a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348921563,"sku":"TEL-HH6191-4","price":1281.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/TEL-HH6191-4__28862.1763741652.500.750.png?v=1785188934"},{"product_id":"seastar-baystar-hydraulic-steering-kit-without-tube-hk4300-4-for-single-engine-outboard-boats","title":"SeaStar BayStar HK4300-4 Hydraulic Steering Kit, No Tubing Included","description":"\u003cp\u003eThe SeaStar BayStar HK4300-4 is a hydraulic steering kit built for single-engine boats that need reliable, low-effort steering at the helm. As part of the BayStar line, it is designed for single-station applications and is not intended for high-speed, high-performance boats such as bass boats. This kit is supplied without hydraulic tubing, which lets you size and order tubing to match your boat's specific helm-to-cylinder run rather than paying for tubing you may not use.\u003c\/p\u003e\u003cp\u003eConstruction is all-metal for durability in the marine environment, and the kit is built to deliver smooth, efficient steering feel without the drag and play common in worn mechanical cable systems. Because it ships without tubing, installation requires sourcing SeaStar-compatible hydraulic tubing separately in the correct length for your vessel before the system can be filled and bled.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HK4300-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e BayStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Hydraulic Steering Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTubing Included:\u003c\/strong\u003e No, tubing sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Boat Steering Helm Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Configuration:\u003c\/strong\u003e Single engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Type Suitability:\u003c\/strong\u003e Not intended for high-speed, high-performance boats such as bass boats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7315091536141\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the HK4300-4 hydraulic steering kit include tubing?\u003c\/strong\u003e No, the SeaStar BayStar HK4300-4 is sold without hydraulic tubing, so tubing must be ordered separately to match your boat's helm-to-cylinder run length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HK4300-4 kit suitable for a bass boat?\u003c\/strong\u003e No. The BayStar system that the HK4300-4 belongs to is not intended for high-speed, high-performance boats such as bass boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many engines does the HK4300-4 steering kit support?\u003c\/strong\u003e The HK4300-4 is designed for single-engine boat applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HK4300-4 steering kit weigh?\u003c\/strong\u003e The SeaStar BayStar HK4300-4 hydraulic steering kit weighs 20 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the HK4300-4 made of?\u003c\/strong\u003e The HK4300-4 kit uses all-metal construction for the helm and cylinder components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HK4300-4 be used with a single helm station?\u003c\/strong\u003e Yes, the HK4300-4 is a BayStar kit configured for single-station helm setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the HK4300-4 and a BayStar kit that includes tubing?\u003c\/strong\u003e The HK4300-4 ships without hydraulic tubing, requiring the buyer to source tubing separately, whereas a tube-included kit provides pre-set tubing lengths in the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HK4300-4 a genuine SeaStar part?\u003c\/strong\u003e Yes, HK4300-4 is the genuine SeaStar manufacturer part number for this BayStar hydraulic steering kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the HK4300-4 kit?\u003c\/strong\u003e The HK4300-4 kit includes the BayStar hydraulic helm and cylinder components but does not include hydraulic tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the HK4300-4 work on a high-performance boat?\u003c\/strong\u003e No, the BayStar system used in the HK4300-4 is not intended for high-speed, high-performance boats such as bass boats.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989348954331,"sku":"TEL-HK4300-4","price":888.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SeaStar-BayStar-HK4300-4-Hydraulic-Steering-Kit-without-Hydraulic-Hoses__52248.1752266406.500.750.jpg?v=1785189062"},{"product_id":"seastar-hk6400-4-hydraulic-outboard-steering-kit-without-hoses-single-or-dual-engines-up-to-350-hp","title":"SeaStar HK6400-4 Hydraulic Outboard Steering Kit, Single Engine, No Hose","description":"\u003cp\u003eThe SeaStar HK6400-4 is a hydraulic steering kit built for single outboard powered boats, sold without hoses so it can be paired with hose lengths and fittings sized to your specific helm layout. It is constructed of metal components designed to deliver the smooth, low-effort steering feel that hydraulic systems are known for, replacing cable steering on runabouts, center console boats, cruisers, and similar single-outboard applications. The kit is intended for boats that are not driven aggressively and do not exceed 75 mph, making it a good fit for typical recreational and light offshore use rather than high-performance racing setups.\u003c\/p\u003e\u003cp\u003eBecause the HK6400-4 ships without hoses, installers supply hose runs cut to the length needed to reach from the helm pump to the outboard cylinder, along with the fittings required to complete the connection. This lets a single kit serve boats of different lengths without forcing a fixed hose length on the buyer. As a genuine SeaStar part, the HK6400-4 is identified by its own part number so it can be matched precisely against a boat's existing SeaStar hydraulic steering components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HK6400-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Steering Kit (Without Hoses)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Single outboard powered boats, non-aggressive driving, up to 75 mph\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 100% Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA or Imported\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 22.4 x 14.2 x 5.2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 21.79 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7315091536165\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HK6400-4 steering kit used for?\u003c\/strong\u003e It is a hydraulic steering kit for single outboard powered boats, designed for non-aggressive driving at speeds up to 75 mph.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HK6400-4 kit come with hoses?\u003c\/strong\u003e No, the SeaStar HK6400-4 is sold without hoses, so hose length and fittings are selected separately to match the boat's helm-to-engine distance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the HK6400-4 steering kit made from?\u003c\/strong\u003e The kit is built from 100% metal components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar HK6400-4 weigh?\u003c\/strong\u003e The HK6400-4 steering kit weighs 21.79 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the HK6400-4?\u003c\/strong\u003e It ships in packaging measuring 22.4 x 14.2 x 5.2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HK6400-4 designed for single or dual outboard setups?\u003c\/strong\u003e The HK6400-4 is intended for single outboard powered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat top speed is the HK6400-4 rated for?\u003c\/strong\u003e It is rated for boats that are not driven aggressively and do not exceed 75 mph.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the SeaStar HK6400-4 manufactured?\u003c\/strong\u003e The HK6400-4 is made in the USA or imported.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HK6400-4 a genuine SeaStar part?\u003c\/strong\u003e Yes, the HK6400-4 is a genuine SeaStar hydraulic steering kit identified by its own manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is listed for the SeaStar HK6400-4?\u003c\/strong\u003e The UPC for the HK6400-4 steering kit is 7315091536165.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349249243,"sku":"TEL-HK6400-4","price":1562.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/11__85036.1762438436.500.750.png?v=1785188493"},{"product_id":"dometic-seastar-ho5114-outboard-hydraulic-steering-hose-kit-2-x-14-ft-with-pre-attached-fittings","title":"SeaStar Outboard Hydraulic Steering Hose Kit HO5114, 14 ft, Set of 2 Hoses (OEM TELHO5114)","description":"\u003cp\u003eThe SeaStar HO5114 is a standard-length outboard hydraulic steering hose kit containing two hoses of equal length for connecting a SeaStar helm to the steering cylinder on outboard-powered boats. Each hose measures 14 feet and comes with hose fittings pre-attached on both ends, so the kit is ready to route and connect without additional fitting assembly. The hoses are supplied to a fixed standard length and cannot be cut to length; SeaStar outboard hose kits are ordered by part number, where the last two digits of the part number indicate the hose length in feet, so HO5114 corresponds to the 14-foot length. The kit has a polished exterior finish.\u003c\/p\u003e\u003cp\u003eHO5114 is intended for use with SeaStar hydraulic steering systems, with the exception of SeaStar PRO, BayStar, Capilano, and 3-line inboard systems, which use different hose or line configurations. For installations that call for a rigid line instead of flexible hose, a 3\/8 inch diameter copper tube and hose kit is available as a separate part.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO5114\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 14 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 hoses per kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose End Fittings:\u003c\/strong\u003e Pre-attached on both ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut to Length:\u003c\/strong\u003e Not cuttable; supplied at fixed standard length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.94 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 16 x 16 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957804914\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e TELHO5114\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All SeaStar hydraulic steering systems except SeaStar PRO, BayStar, Capilano, and 3-line inboard systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eCompatible with all SeaStar hydraulic steering systems, except SeaStar PRO, BayStar, Capilano, and 3-line inboard systems.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTELHO5114\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat length are the hoses in the SeaStar HO5114 kit?\u003c\/strong\u003e Each hose in the HO5114 kit measures 14 feet, and the kit contains two hoses of that equal length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hoses come in the HO5114 kit?\u003c\/strong\u003e The HO5114 kit contains two hoses of equal length, both fitted for use in a SeaStar outboard hydraulic steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the hose ends already fitted on HO5114?\u003c\/strong\u003e Yes, both hoses in the HO5114 kit come with hose fittings pre-attached on both ends, so no separate end-fitting assembly is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO5114 hoses be cut to a shorter length?\u003c\/strong\u003e No, HO5114 hoses are supplied at a fixed standard length of 14 feet and cannot be cut to length; a different part number must be ordered for a different length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know which SeaStar hose part number to order?\u003c\/strong\u003e SeaStar outboard hose kits are numbered so the last two digits indicate the hose length in feet; HO5114 is the 14-foot kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HO5114 compatible with SeaStar PRO steering systems?\u003c\/strong\u003e No, HO5114 is not for use with SeaStar PRO systems. It is compatible with standard SeaStar hydraulic steering systems, excluding SeaStar PRO, BayStar, Capilano, and 3-line inboard systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the OEM cross-reference number for the SeaStar HO5114 hose kit?\u003c\/strong\u003e The OEM cross-reference number for the SeaStar HO5114 hose kit is TELHO5114.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HO5114 hose kit weigh?\u003c\/strong\u003e The HO5114 hose kit weighs 2.94 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the HO5114 hose kit?\u003c\/strong\u003e The HO5114 hose kit is packaged in a box measuring 16 x 16 x 8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the HO5114 hose have?\u003c\/strong\u003e The HO5114 hose kit has a polished exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an alternative to the flexible hose kit for HO5114 applications?\u003c\/strong\u003e Yes, a 3\/8 inch diameter copper tube and hose kit is available as a separate part for installations that call for rigid line instead of the flexible HO5114 hoses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill HO5114 work with a BayStar steering system?\u003c\/strong\u003e No, HO5114 is not compatible with BayStar systems; it is intended for standard SeaStar hydraulic steering systems only.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349347547,"sku":"TEL-HO5114","price":159.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51aS0Y39WlL.jpg?v=1784477129"},{"product_id":"seastar-hk6400ts-4-1-7-sport-tilt-hydraulic-outboard-steering-kit-helm-cylinder-no-hoses","title":"SeaStar 1.7 Sport Tilt Hydraulic Steering Kit HK6400TS-4 for Outboard Engines up to 350 HP","description":"\u003cp\u003eThe SeaStar HK6400TS-4 is a complete 1.7 Sport Tilt hydraulic steering kit built for outboard-powered boats, giving single or dual non-power-assisted outboard engines smooth, precise steering feel. The kit centers on a 1.7 cubic inch displacement helm that delivers 5 turns lock-to-lock for confident, responsive control at the wheel, paired with a pivot mount outboard steering cylinder (HC5345-3\/58-3) finished in black. The cylinder features positionable stainless steel O-ring (ORB) fittings that simplify hydraulic hose routing and provide a sealing system designed to resist saltwater intrusion and compression set over time. Tilt articulation reaches 48 degrees across 5 positive lock positions, with factory-installed lubrication for consistent operation. Two quarts of SeaStar HA5430 hydraulic steering fluid are included to fill the system; hydraulic hoses are sold separately (SeaStar HO51xx hose kit, ordered by length) so the run can be sized to the boat. Construction uses stainless steel and rubber components, including a soft rubber boot at the cylinder. The system is built and certified to American Boat \u0026amp; Yacht Council (ABYC) and International Standards Organization (ISO) requirements and is suitable for cruisers, runabouts, center console boats, and offshore fishing boats. It supports single and dual outboard installations up to 350 HP (700 combined HP for counter-rotating dual engines) with boats capable of speeds up to 60 MPH, on engines equipped with an ABYC Standard Engine Tilt Tube.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HK6400TS-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e SeaStar 1.7 Tilt Steering Kit (Sport)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Type:\u003c\/strong\u003e Hydraulic Outboard Steering Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelm Displacement:\u003c\/strong\u003e 1.7 cubic inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Turns Lock-to-Lock:\u003c\/strong\u003e 5 turns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelm Grip Size:\u003c\/strong\u003e 7-8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder Mount Type:\u003c\/strong\u003e Pivot mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder Part Number:\u003c\/strong\u003e HC5345-3\/58-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt Articulation:\u003c\/strong\u003e 48 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt Lock Positions:\u003c\/strong\u003e 5 positive lock positions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Engine Horsepower:\u003c\/strong\u003e 350 HP single or dual engine; 700 HP combined for counter-rotating dual engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Boat Speed:\u003c\/strong\u003e 60 MPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Fluid Included:\u003c\/strong\u003e 2 quarts SeaStar HA5430 hydraulic steering fluid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Hoses:\u003c\/strong\u003e Sold separately (SeaStar HO51xx hose kit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel, rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e ABYC and ISO certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 29 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282390419\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle or dual non-power-assisted outboard engines up to 350 HP (700 combined HP for counter-rotating dual engines)\u003c\/li\u003e\n\u003cli\u003eRequires an ABYC Standard Engine Tilt Tube\u003c\/li\u003e\n\u003cli\u003eSuitable for boats with speeds up to 60 MPH\u003c\/li\u003e\n\u003cli\u003eSupports dual station use with purchase of an additional helm, hose, and fittings (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SeaStar HK6400TS-4 Sport Tilt Steering Kit include?\u003c\/strong\u003e The HK6400TS-4 kit includes a 1.7 cubic inch displacement front mount helm, a pivot mount outboard steering cylinder (HC5345-3\/58-3) in black, and 2 quarts of SeaStar HA5430 hydraulic steering fluid. Hydraulic hoses are sold separately as a SeaStar HO51xx hose kit sized to the installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does this steering kit have?\u003c\/strong\u003e The helm in the HK6400TS-4 kit provides 5 turns lock-to-lock, which is a standard feel for recreational outboard steering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower this steering kit can handle?\u003c\/strong\u003e This kit is rated for single or dual non-power-assisted outboard engines up to 350 HP, or up to 700 combined HP when used on counter-rotating dual engine setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HK6400TS-4 come with hydraulic hoses?\u003c\/strong\u003e No, hydraulic hoses are not included with the HK6400TS-4. They are ordered separately as a SeaStar HO51xx hose kit, chosen by the length needed for the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HK6400TS-4 steering kit weigh?\u003c\/strong\u003e The complete SeaStar HK6400TS-4 Sport Tilt Steering Kit weighs 29 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials is this steering kit made from?\u003c\/strong\u003e The HK6400TS-4 uses stainless steel and rubber construction, including stainless steel O-ring (ORB) fittings on the cylinder and a soft rubber boot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much tilt articulation does the steering cylinder allow?\u003c\/strong\u003e The pivot mount cylinder included with the HK6400TS-4 allows 48 degrees of tilt articulation with 5 positive lock positions for the outboard engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this steering kit certified for marine use?\u003c\/strong\u003e Yes, the HK6400TS-4 is built and certified to meet American Boat \u0026amp; Yacht Council (ABYC) and International Standards Organization (ISO) requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Sport and Classic versions of this steering kit?\u003c\/strong\u003e The Sport version (HK6400TS-4) and the Classic version (HK6400TC-3) share the same outboard steering cylinder, hose kit, and hydraulic fluid, but use different helm styles suited to different helm aesthetics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used for a dual-engine or dual-station setup?\u003c\/strong\u003e The HK6400TS-4 supports dual, non-power-assisted outboard engines up to 700 combined HP for counter-rotating setups, and can be configured for dual station steering with an additional helm, hose, and fittings purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size grip does the helm on this kit have?\u003c\/strong\u003e The helm included in the HK6400TS-4 Sport Tilt Steering Kit has a grip size of 7-8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of hydraulic fluid should be used with the HK6400TS-4?\u003c\/strong\u003e The HK6400TS-4 is filled with SeaStar HA5430 hydraulic steering fluid, with 2 quarts included in the kit; using non-SeaStar hydraulic fluid or hoses may affect performance and warranty coverage.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349380315,"sku":"TEL-HK6400TS-4","price":2154.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/HK6400TS-3__43341.1752841876.500.750.jpg?v=1785188567"},{"product_id":"seastar-ho5116-outboard-hydraulic-steering-hose-kit-2-x-16-ft-4-9-m-with-pre-attached-fittings","title":"SeaStar Outboard Hydraulic Steering Hose Kit, HO5116, 16 Feet (Set of 2)","description":"\u003cp\u003eThe SeaStar HO5116 is a standard-length outboard hydraulic steering hose kit containing two hoses of equal length, 16 feet each, for use with SeaStar hydraulic steering systems on single-engine outboard boats. Both hoses come with hose fittings pre-attached on both ends, so the kit is ready to connect from the helm to the cylinder without additional fitting assembly. These hoses are supplied at a standard length and cannot be cut to length; SeaStar outboard hose kits follow a part numbering convention where the last two digits of the part number indicate the hose length in feet, so HO5116 denotes a 16 foot kit.\u003c\/p\u003e\u003cp\u003eThis hose kit is intended for connecting a SeaStar hydraulic helm to the steering cylinder on single-engine outboard installations. It is compatible with SeaStar hydraulic steering systems generally, with the exception of SeaStar PRO, BayStar, Capilano, and 3-line inboard systems, which use different hose or hardware configurations. The hose exterior has a polished finish. As an alternative to a pre-made hose kit, SeaStar outboard systems can also be plumbed using 3\/8 inch diameter copper tube with a separate copper tube and hose kit, for installations where routing favors rigid tubing over flexible hose.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO5116\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 16 feet (each hose)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Hoses:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Fittings:\u003c\/strong\u003e Pre-attached on both ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 16 x 16 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.94 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957804945\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Number:\u003c\/strong\u003e TELHO5116\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSeaStar hydraulic steering systems (single-engine outboard applications)\u003c\/li\u003e\n\u003cli\u003eNot compatible with SeaStar PRO, BayStar, Capilano, or 3-line inboard steering systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTELHO5116\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SeaStar HO5116 hose kit include?\u003c\/strong\u003e The HO5116 kit includes two hydraulic steering hoses of equal length, 16 feet each, with hose fittings pre-attached on both ends of each hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO5116 hoses be cut to a shorter length?\u003c\/strong\u003e No, SeaStar outboard hose kits including the HO5116 are supplied as standard fixed lengths and cannot be cut to length; a different length kit must be ordered if 16 feet does not suit the installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know the HO5116 kit is 16 feet long?\u003c\/strong\u003e SeaStar outboard hose part numbers use the last two digits to indicate hose length in feet, so the HO5116 part number corresponds to 16 foot hoses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO5116 hose kit compatible with all SeaStar steering systems?\u003c\/strong\u003e The HO5116 hose kit works with SeaStar hydraulic steering systems generally, but it is not compatible with SeaStar PRO, BayStar, Capilano, or 3-line inboard systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the OEM equivalent number for the SeaStar HO5116?\u003c\/strong\u003e The SeaStar HO5116 hose kit corresponds to OEM part number TELHO5116.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HO5116 hose kit weigh?\u003c\/strong\u003e The HO5116 hose kit weighs 2.94 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the HO5116 hose kit as packaged?\u003c\/strong\u003e As packaged, the SeaStar HO5116 hose kit measures 16 x 16 x 6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the hoses in the HO5116 kit already have fittings attached?\u003c\/strong\u003e Yes, both hoses in the HO5116 kit come with hose fittings pre-attached on both ends, ready for connection at the helm and cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an alternative to using pre-made hoses for a SeaStar outboard system?\u003c\/strong\u003e Yes, instead of a hose kit like the HO5116, SeaStar outboard systems can be plumbed with 3\/8 inch diameter copper tube using a separate copper tube and hose kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the SeaStar HO5116 hose have?\u003c\/strong\u003e The SeaStar HO5116 hose has a polished exterior finish.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349445851,"sku":"TEL-HO5116","price":174.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51aS0Y39WlL_2239ab73-2b9c-46de-9d18-c68ee46ac766.jpg?v=1784477138"},{"product_id":"seastar-ho5118-outboard-hydraulic-steering-hose-kit-18-ft-standard-pair-1-000-psi-pre-attached-fittings","title":"SeaStar HO5118 Outboard Hydraulic Steering Hose Kit, 18 Feet, Sold in Pairs","description":"\u003cp\u003eThe SeaStar HO5118 is a standard-length hydraulic steering hose kit built for outboard steering systems, supplying the hose run between the helm and the outboard steering cylinder. Each hose measures 18 feet and comes with pre-attached fittings on both ends, so there is no separate fitting installation required at hookup. The kit is sold per pair, giving you both the pressure and return hoses needed for a complete single-hose-run connection. Hoses are rated to 1,000 psi, matching the operating pressure of hydraulic outboard steering systems, and are constructed of black synthetic rubber for resistance to marine fuel, oil, and weather exposure.\u003c\/p\u003e\u003cp\u003eThis hose kit is intended for use with Dometic hydraulic steering systems, with the exception of Dometic PRO, BayStar, Capilano, and 3-line inboard systems, which use different hose or fitting configurations. Because outboard hoses in this series are supplied in fixed standard lengths and cannot be field-cut, the correct part number must be selected for the required run length; the last two digits of the part number indicate the hose length in feet, so HO5118 is the 18-foot version. Installers needing a different length should select the corresponding part in the same series rather than shortening this hose kit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO5118\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 18 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold per pair (2 hoses)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Rating:\u003c\/strong\u003e 1000 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Synthetic Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Ends:\u003c\/strong\u003e Pre-attached fittings on both ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut to Length:\u003c\/strong\u003e No, standard fixed length only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All Dometic hydraulic steering systems except Dometic PRO, BayStar, Capilano, and 3-line inboard systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957804969\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for single-engine outboard hydraulic steering installations using Dometic-compatible systems (excluding Dometic PRO, BayStar, Capilano, and 3-line inboard systems).\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the SeaStar HO5118 hose kit?\u003c\/strong\u003e Each hose in the HO5118 kit is 18 feet long, indicated by the last two digits of the part number, which denote hose length in feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO5118 come with one hose or two?\u003c\/strong\u003e The HO5118 is sold per pair, giving you two 18-foot hoses for a complete pressure and return hose run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO5118 hose be cut to a shorter length?\u003c\/strong\u003e No. HO5118 is a standard fixed-length hose and cannot be cut to length; a different standard length part number must be ordered if a shorter or longer run is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pressure rating of the HO5118 steering hose?\u003c\/strong\u003e The SeaStar HO5118 hose kit is rated to 1,000 psi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the HO5118 hose made from?\u003c\/strong\u003e The HO5118 hose kit is made of black synthetic rubber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the HO5118 hoses come with fittings already installed?\u003c\/strong\u003e Yes, the HO5118 hoses come with fittings pre-attached on both ends, ready for connection at the helm and steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SeaStar HO5118 compatible with BayStar steering systems?\u003c\/strong\u003e No. The HO5118 hose kit is compatible with Dometic hydraulic steering systems but is not for use with Dometic PRO, BayStar, Capilano, or 3-line inboard systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HO5118 hose kit weigh?\u003c\/strong\u003e The HO5118 hose kit weighs 3.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar HO5118?\u003c\/strong\u003e The SeaStar HO5118 outboard steering hose kit has UPC 731957804969.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an alternative to the HO5118 hose for connecting the steering cylinder to the engine?\u003c\/strong\u003e Yes, a 3\/8 inch diameter copper tube and hose kit is available as an alternative connection option for single-engine outboard steering setups, though it is a separate part from the HO5118 hose kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO5118 for single-engine or dual-engine outboard setups?\u003c\/strong\u003e The HO5118 hose kit is used in single-engine outboard steering installations.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349576923,"sku":"TEL-HO5118","price":187.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41Cy7VWPX_L.jpg?v=1784477149"},{"product_id":"seastar-ho5126-standard-outboard-hydraulic-steering-hose-kit-2-x-26-ft-for-baystar-and-seastar-systems","title":"SeaStar HO5126 Outboard Hydraulic Steering Hose Kit, Standard, 26 Feet (2 Hoses)","description":"\u003cp\u003eThe SeaStar HO5126 is a standard-duty outboard hydraulic steering hose kit built for connecting a SeaStar hydraulic helm pump to an outboard steering cylinder. It is supplied as a fixed-length kit of two 26 foot hoses and, like all hoses in the HO51xx standard line, is sold in preset lengths only -- it cannot be cut to length in the field, so the correct length must be selected at time of order. The two-hose configuration matches the pressure and return line requirement of a single-engine outboard hydraulic steering installation, running from the helm at the console back to the steering cylinder connection at the engine.\u003c\/p\u003e\u003cp\u003eThis is the standard hose option within SeaStar's outboard hose lineup (identified by the HO51xx part number series), as distinct from the Xtreme-duty HO57xx series. For installations that use rigid tubing instead of flexible hose for part of the run, SeaStar also offers a copper tube and hose kit as an alternate routing option. The HO5126 kit weighs 4.14 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO5126\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Outboard hydraulic steering hose kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 26 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 hoses per kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Series:\u003c\/strong\u003e HO51xx Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut to Length:\u003c\/strong\u003e No, fixed standard length only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Single engine outboard hydraulic steering, helm-to-cylinder connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957805003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Hydraulic Boat Steering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits SeaStar outboard hydraulic steering systems on single engine applications, connecting the helm pump to the outboard steering cylinder. For dual engine setups, a tie bar from SeaStar or the engine manufacturer is required in addition to the hose run. A specific make, horsepower, or year range for this hose is not specified by SeaStar.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the SeaStar HO5126 hose kit?\u003c\/strong\u003e The HO5126 kit includes two hoses that are 26 feet in length each, matching the last two digits of the part number (26) to the length in feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO5126 hose be cut to a shorter length?\u003c\/strong\u003e No. SeaStar outboard hoses in the HO51xx series, including the HO5126, are sold in fixed standard lengths and cannot be cut to length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hoses come in the HO5126 kit?\u003c\/strong\u003e The kit contains two 26 foot hoses, providing the pressure and return line pair needed for a single-engine outboard hydraulic steering connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the HO51xx and HO57xx hose series?\u003c\/strong\u003e The HO51xx series, which includes the HO5126, is SeaStar's standard-duty outboard hose line, while the HO57xx series is the Xtreme-duty alternative.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the HO5126 hose connect to?\u003c\/strong\u003e This hose kit runs from the SeaStar hydraulic helm pump to the outboard steering cylinder in a single engine hydraulic steering setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO5126 work for dual engine installations?\u003c\/strong\u003e The HO5126 hose is used in outboard hydraulic steering runs, but dual engine setups also require a tie bar from SeaStar or the engine manufacturer in addition to the hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HO5126 hose kit weigh?\u003c\/strong\u003e The SeaStar HO5126 hose kit weighs 4.14 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an alternative to hose for the steering line?\u003c\/strong\u003e Yes, SeaStar offers a 3\/8 inch copper tube and hose kit as an alternate option to flexible hose for the steering line run, in place of the HO51xx\/HO57xx hose series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO5126 a genuine SeaStar part?\u003c\/strong\u003e Yes, HO5126 is SeaStar's own part number for this standard 26 foot outboard hydraulic steering hose kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length options are available besides 26 feet?\u003c\/strong\u003e SeaStar's outboard hose line uses the last two digits of the part number to indicate length in feet, so other standard lengths are available under different HO51xx\/HO57xx part numbers; the HO5126 specifically is the 26 foot standard hose.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349707995,"sku":"TEL-HO5126","price":285.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_edfc1f31-1471-4303-a850-91701996cd31.jpg?v=1785348990"},{"product_id":"seastar-ho5124-outboard-hydraulic-steering-hose-kit-two-24-ft-pre-fitted-hoses-for-seastar-steering-systems","title":"SeaStar Outboard Hydraulic Steering Hose Kit HO5124, 24 Feet, Set of 2 Hoses","description":"\u003cp\u003eThe SeaStar HO5124 is a 24 foot outboard hydraulic steering hose kit built as a standard-length replacement or extension set for SeaStar hydraulic outboard steering systems. The kit contains two hoses of equal length, each supplied with hose fittings pre-attached at both ends, so the hoses run directly from the helm pump to the steering cylinder without additional fitting assembly. The hoses are constructed of reinforced rubber or synthetic material in black and are supplied as a matched pair rather than as bulk hose, since SeaStar outboard hose is ordered in standard lengths and is not intended to be cut to length in the field.\u003c\/p\u003e\u003cp\u003eThis hose kit is compatible with SeaStar hydraulic steering systems generally, but it is not intended for use with SeaStar PRO helms, BayStar systems, Capilano systems, or 3-line inboard steering systems, so confirm your system type before ordering. For installations where hose routing needs to be built up from raw tubing instead of a fixed-length hose, SeaStar also offers a 3\/8 inch copper tube and hose kit as an alternative connection method, though that is a separate part from this pre-made hose kit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO5124\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 24 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 hoses of equal length, per kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Reinforced rubber or synthetic material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.99 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings:\u003c\/strong\u003e Pre-attached hose fittings on both ends of each hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957804990\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompatible with SeaStar hydraulic outboard steering systems\u003c\/li\u003e\n\u003cli\u003eNot for use with SeaStar PRO helms\u003c\/li\u003e\n\u003cli\u003eNot for use with BayStar systems\u003c\/li\u003e\n\u003cli\u003eNot for use with Capilano systems\u003c\/li\u003e\n\u003cli\u003eNot for use with 3-line inboard steering systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long are the hoses in the SeaStar HO5124 kit?\u003c\/strong\u003e Each hose in the HO5124 kit is 24 feet long, and the kit includes two hoses of that equal length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hoses come in the HO5124 kit?\u003c\/strong\u003e The HO5124 kit contains two hoses of equal length, both fitted with pre-attached hose fittings on each end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO5124 hoses be cut to a shorter length?\u003c\/strong\u003e No. SeaStar outboard hose of this type is ordered in standard lengths and is not intended to be cut to length; the HO5124 kit is fixed at 24 feet per hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the HO5124 hose kit made of?\u003c\/strong\u003e The hoses in the HO5124 kit are made of reinforced rubber or synthetic material and are black in color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar HO5124 hose kit weigh?\u003c\/strong\u003e The HO5124 hose kit weighs 3.99 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the HO5124 hose kit work with a SeaStar PRO helm?\u003c\/strong\u003e No. The HO5124 hose kit is not intended for use with SeaStar PRO helms; it is designed for standard SeaStar outboard steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO5124 kit compatible with BayStar or Capilano steering systems?\u003c\/strong\u003e No, the HO5124 hose kit is not compatible with BayStar systems or Capilano systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO5124 kit work with 3-line inboard steering systems?\u003c\/strong\u003e No. The HO5124 hose kit is not designed for 3-line inboard steering systems; it is intended for outboard hydraulic steering applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the hoses in the HO5124 kit already have fittings attached?\u003c\/strong\u003e Yes, each hose in the HO5124 kit comes with hose fittings pre-attached on both ends, ready to connect between the helm pump and steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an alternative to a fixed-length hose kit like the HO5124 for connecting the steering cylinder?\u003c\/strong\u003e Yes. SeaStar also offers a 3\/8 inch copper tube and hose kit as an alternative connection method for outboard steering systems, which is a separate part from the pre-made HO5124 hose kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the HO5124?\u003c\/strong\u003e The HO5124 kit includes two 24 foot hoses of equal length, each with hose fittings pre-attached on both ends.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349740763,"sku":"TEL-HO5124","price":240.06,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51aS0Y39WlL_f0b2c658-5946-4205-b942-725a0fcb062f.jpg?v=1784477181"},{"product_id":"seastar-ho7100-field-installed-bulkhead-kit-single-hose-pair-stainless-steel-hose-fitting","title":"SeaStar HO7100 Single Hose Bulkhead Kit, Stainless Steel, Pair","description":"\u003cp\u003eThe SeaStar HO7100 is a field-installable bulkhead kit designed to let boaters route a hose cleanly and safely through the hull. Sold as a pair, the kit is built for single hose applications and uses a split grommet design that fits directly onto an existing hose assembly, so there is no need to disconnect fittings or re-run the hose from scratch. A split pigtail with snap-fit tabs holds the assembly together with a positive, secure feel once installed correctly. Stainless steel cover plates give the fitting a clean, corrosion-resistant finish that blends with a boat's existing stainless trim, offering a cosmetic upgrade over standard bulkhead fittings while maintaining a safe, sealed hull penetration. Because the components are field installable, this kit works as a straightforward retrofit onto a standard hose kit already in place, making it a practical solution for boaters looking to tidy up hose routing without replacing the entire steering hose run. The pair configuration means two matching fittings are included, suited to installations that route a single hose through two points or that need a matched replacement set.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO7100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Bulkhead Kit, Single Hose, Pair, Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Configuration:\u003c\/strong\u003e Single hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair (2 fittings)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel cover plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Split grommet with split pigtail and snap-fit tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Field installable onto a standard hose kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 9 x 6 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957934642\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HO7100 bulkhead kit used for?\u003c\/strong\u003e The HO7100 is a bulkhead fitting kit that lets a single hose pass cleanly through a boat's hull, giving a finished, sealed look at the penetration point while keeping the hose routing tidy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO7100 come with one fitting or two?\u003c\/strong\u003e It is sold as a pair, so two matching stainless steel bulkhead fittings are included in the HO7100 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO7100 kit for a single hose or dual hose setup?\u003c\/strong\u003e This kit is the single hose version of SeaStar's bulkhead fittings, designed around one hose passing through each fitting rather than a dual-hose configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the HO7100 without removing my existing hose?\u003c\/strong\u003e Yes, the HO7100 uses a split grommet and split pigtail design with snap-fit tabs, so it can be field installed directly onto a standard hose assembly that is already in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the HO7100 cover plates made from?\u003c\/strong\u003e The cover plates on the HO7100 bulkhead kit are stainless steel, chosen for corrosion resistance and a finish that matches other stainless hardware on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HO7100 bulkhead kit weigh?\u003c\/strong\u003e The SeaStar HO7100 weighs 1 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the HO7100?\u003c\/strong\u003e The HO7100 ships in packaging measuring 9 x 6 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know the HO7100 is installed correctly?\u003c\/strong\u003e The snap-fit tabs on the split pigtail are designed to give a positive, noticeable feel when they are properly seated, which is the indicator that the HO7100 fitting is installed correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the HO7100 fittings match my boat's existing stainless trim?\u003c\/strong\u003e The stainless steel cover plates on the HO7100 are intended to blend in with a boat's existing stainless trim while providing a cosmetic upgrade over a plain bulkhead penetration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO7100 a genuine SeaStar part?\u003c\/strong\u003e Yes, HO7100 is the SeaStar manufacturer part number for this stainless steel single hose bulkhead kit, sold as a matched pair.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349839067,"sku":"TEL-HO7100","price":75.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/HO7100__92586.1722507344.500.750.jpg?v=1785189118"},{"product_id":"seastar-pro-ho5716-kevlar-reinforced-hydraulic-steering-hose-kit-2-x-16ft-for-seastar-outboard-steering-systems","title":"SeaStar HO5716 Pro Outboard Hydraulic Steering Hose Kit, Kevlar Reinforced, 16 Feet","description":"\u003cp\u003eThe SeaStar HO5716 is a Pro outboard hydraulic steering hose kit built for SeaStar PRO helm systems. Each kit includes two hoses of equal length, 16 feet each, for a combined 32 feet of hose. The hose uses a custom multi-layered composite nylon construction with Kevlar reinforcement for added strength, engineered to provide very low thermal expansion in the steering system. It is designed to exceed SAE and ABYC specifications and deliver precise steering control beyond what standard hydraulic industry hose can achieve, while remaining kink and abrasion resistant.\u003c\/p\u003e\u003cp\u003eEach hose comes with a factory swaged solid fitting connection featuring an O-ring seal backed by a metal-to-metal seal for a secure, leak-resistant joint. A bend restrictor is fitted on one end of each hose, which should be attached to the cylinder end to prevent kinking during installation. The hose is rated to a maximum pressure of 1500 pounds per square inch and is intended for use with SeaStar PRO (1500 psi) reinforced Kevlar hose systems only. The hose cannot be cut to length; it must be ordered in the correct pre-set length for the installation. SeaStar outboard hose part numbers follow a length code where the final two digits indicate the hose length in feet, so the HO5716 designation corresponds to 16-foot hoses.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO5716\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Two hoses, 16 feet each (32 feet total)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length (each):\u003c\/strong\u003e 16 feet (192 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon with Kevlar reinforcement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black, Blue, Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pressure:\u003c\/strong\u003e 1500 pounds per square inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Wall Thickness:\u003c\/strong\u003e 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (each hose):\u003c\/strong\u003e 192 inches long x 0.38 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Connection:\u003c\/strong\u003e Factory swaged solid fitting with O-ring seal and metal-to-metal backup seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Helm System:\u003c\/strong\u003e SeaStar PRO (1500 psi) reinforced Kevlar hose systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957805270\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long are the hoses in the HO5716 kit?\u003c\/strong\u003e Each hose in the SeaStar HO5716 kit is 16 feet long, and the kit includes two hoses of equal length for a combined 32 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO5716 hose be cut to a shorter length?\u003c\/strong\u003e No. SeaStar outboard hydraulic steering hose, including the HO5716, cannot be cut to length. Cutting the hose destroys it, since there is no way to field-swage new fittings onto the ends once cut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the HO5716 hose made from?\u003c\/strong\u003e The HO5716 is a custom multi-layered composite nylon hose with Kevlar reinforcement, engineered for strength and very low thermal expansion in hydraulic steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO5716 kit work with any SeaStar helm?\u003c\/strong\u003e SeaStar PRO helm systems require SeaStar PRO (1500 psi) reinforced Kevlar hoses only, and the HO5716 is rated to 1500 psi, matching that requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum pressure rating of the HO5716 hose?\u003c\/strong\u003e The HO5716 hose is rated to a maximum pressure of 1500 pounds per square inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hoses come in the HO5716 kit?\u003c\/strong\u003e The kit contains two hoses of equal length, 16 feet each, making up the full HO5716 hydraulic steering hose kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of fitting connection does the HO5716 hose use?\u003c\/strong\u003e Each HO5716 hose has a factory swaged solid fitting connection with an O-ring seal, backed by a metal-to-metal seal for added security.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich end of the HO5716 hose should be connected to the steering cylinder?\u003c\/strong\u003e Each hose in the HO5716 kit has a bend restrictor on one end to prevent kinking, and that end is meant to be attached to the steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO5716 hose resistant to kinking and abrasion?\u003c\/strong\u003e Yes, the HO5716 hydraulic steering hose is kink and abrasion resistant due to its multi-layered composite construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the last part of the HO5716 part number mean?\u003c\/strong\u003e SeaStar outboard hose part numbers use a length code where the final two digits indicate the hose length in feet, so HO5716 denotes a 16-foot hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO5716 kit suitable for dual engine installations?\u003c\/strong\u003e For dual engine setups, a SeaStar or engine manufacturer's tie bar is required in addition to the hose kit; the HO5716 hose itself is ordered per the length needed for the installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HO5716 hose kit weigh?\u003c\/strong\u003e The SeaStar HO5716 outboard hydraulic steering hose kit weighs 3.1 pounds.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349871835,"sku":"TEL-HO5716","price":324.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71-shwoJgcL.jpg?v=1784477186"},{"product_id":"seastar-ho5120-outboard-hydraulic-steering-hose-kit-2-x-20-ft-6-1-m-reinforced-rubber","title":"SeaStar Outboard Hose Kit HO5120, 2 x 20 Feet Hydraulic Steering Hoses","description":"\u003cp\u003eThe SeaStar HO5120 Outboard Hose Kit supplies the two hydraulic steering hoses needed to connect a SeaStar helm to an outboard steering cylinder. Each kit contains two hoses of equal length, 20 feet each, with fittings pre-attached at both ends so the hoses connect directly without additional flaring or fitting work. The hoses are made of reinforced rubber and are supplied in a fixed standard length; SeaStar outboard hoses are ordered by length and cannot be cut to length, which is why they are sold in defined size increments such as this 20 foot kit.\u003c\/p\u003e\u003cp\u003eThis hose kit is used for the single engine hydraulic hose run connecting the helm pump to the outboard steering cylinder. On a dual engine installation, a SeaStar or engine manufacturer's tie bar is also required in addition to the steering hoses. For engines equipped with factory power steering, note that not all SeaStar cylinders are suitable; consult your specific cylinder application before final installation. Buyers who prefer a rigid, non-rubber steering line for a permanent installation can instead use SeaStar's 3\/8 inch copper tube and hose kit as an alternative to this flexible rubber hose kit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO5120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 20 feet (each hose)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Hoses:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Reinforced Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black, Gold, Green, Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 16 x 16 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions (L x W x H):\u003c\/strong\u003e 14.88 x 14.33 x 4.02 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.58 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957804976\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings:\u003c\/strong\u003e Pre-attached hose fittings on both ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut to Length:\u003c\/strong\u003e No, supplied in fixed standard lengths only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All SeaStar systems except SeaStar PRO, BayStar, Capilano, and 3-line inboard systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eCompatible with SeaStar outboard hydraulic steering systems, for single engine hose runs (dual engine installations also require a tie bar). Not compatible with SeaStar PRO, BayStar, Capilano, or 3-line inboard systems.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SeaStar HO5120 hose kit include?\u003c\/strong\u003e The HO5120 kit includes two hydraulic steering hoses of equal length, 20 feet each, with fittings pre-attached at both ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO5120 hoses be cut to a shorter length?\u003c\/strong\u003e No. SeaStar outboard hoses like the HO5120 are ordered as standard fixed lengths and cannot be cut to length; if you need a different length, order the corresponding hose part number for that length instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length are the hoses in the HO5120 kit?\u003c\/strong\u003e Each of the two hoses in the HO5120 kit is 20 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO5120 hose kit compatible with SeaStar PRO systems?\u003c\/strong\u003e No. The HO5120 outboard hose kit is not for use with SeaStar PRO, BayStar, Capilano, or 3-line inboard systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the HO5120 hoses made of?\u003c\/strong\u003e The HO5120 hoses are made of reinforced rubber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HO5120 hose kit weigh?\u003c\/strong\u003e The SeaStar HO5120 hose kit weighs 3.58 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the hoses come with fittings already installed?\u003c\/strong\u003e Yes, both hoses in the HO5120 kit have fittings pre-attached on both ends, so no additional flaring or fitting work is required before connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an alternative to the rubber hose kit for a more permanent installation?\u003c\/strong\u003e Yes. SeaStar also offers a 3\/8 inch copper tube and hose kit as an alternative to the flexible rubber HO5120 hose kit for buyers who want a rigid steering line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO5120 kit be used on dual engine installations?\u003c\/strong\u003e The HO5120 hose kit provides the single engine steering hose run; for dual engine setups, a SeaStar or engine manufacturer's tie bar is also required in addition to the hose kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color options does the HO5120 hose come in?\u003c\/strong\u003e The HO5120 hose kit is available in black, gold, green, or red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO5120 hose kit suitable for engines with factory power steering?\u003c\/strong\u003e Check your specific SeaStar cylinder before installing, since not every SeaStar steering cylinder is suitable for use on engines fitted with factory power steering.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349904603,"sku":"TEL-HO5120","price":203.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51aS0Y39WlL_d6c9a10b-29c4-4823-b3d3-b09e693419c9.jpg?v=1784477194"},{"product_id":"seastar-ho7105-field-installed-bulkhead-kit-single-hose-plastic-pair-for-marine-hydraulic-steering","title":"SeaStar HO7105 Field Installed Bulkhead Fitting Kit, Single Hose, Plastic, Pair","description":"\u003cp\u003eThe SeaStar HO7105 is a field installed bulkhead fitting kit designed for single hose hydraulic steering system installations. Sold as a pair, this plastic bulkhead kit allows a steering hose to pass through a bulkhead or transom while maintaining a secure, sealed connection at the point of entry. Field installed kits like this one are used when a hose needs to be routed through a boat's structure during system installation or when replacing worn or damaged bulkhead fittings on an existing SeaStar hydraulic steering setup.\u003c\/p\u003e\u003cp\u003eConstructed of plastic, the HO7105 kit is intended for single hose applications and comes as a matched pair of fittings, providing the components needed for a standard bulkhead pass-through on both sides of the mounting point. This kit is a practical choice for boat builders and owners performing new steering hose installations or servicing existing SeaStar hydraulic steering lines.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO7105\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Kit Field Installed Bulkhead, Single Hose, Pair Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Steering Parts \u0026amp; Accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Configuration:\u003c\/strong\u003e Single hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair (2 fittings)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Field installed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957934659\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HO7105 bulkhead fitting kit used for?\u003c\/strong\u003e The HO7105 is a field installed bulkhead fitting kit that lets a single hydraulic steering hose pass through a bulkhead or transom with a secure, sealed connection at the entry point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fittings come in the HO7105 kit?\u003c\/strong\u003e This kit includes a pair of plastic bulkhead fittings, providing matched components for both sides of the bulkhead pass-through.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the HO7105 bulkhead fitting made of?\u003c\/strong\u003e The HO7105 bulkhead fitting kit is made of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO7105 kit for single or dual hose steering systems?\u003c\/strong\u003e The HO7105 is configured for single hose hydraulic steering installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO7105 be installed after the boat is already built?\u003c\/strong\u003e Yes, the HO7105 is a field installed kit, meaning it is designed to be fitted during installation or retrofit work rather than only at the factory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the SeaStar HO7105 kit?\u003c\/strong\u003e The SeaStar HO7105 bulkhead fitting kit weighs 1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO7105 kit include mounting hardware?\u003c\/strong\u003e The HO7105 is supplied as a pair of plastic bulkhead fittings for the hose pass-through; check with the installation instructions for your specific steering system for any additional hardware needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar HO7105 kit?\u003c\/strong\u003e The UPC for the SeaStar HO7105 bulkhead fitting kit is 731957934659.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO7105 compatible with any hydraulic steering brand?\u003c\/strong\u003e The HO7105 is a SeaStar branded bulkhead fitting kit designed for use with SeaStar hydraulic steering hose installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need a bulkhead fitting kit like the HO7105?\u003c\/strong\u003e A bulkhead fitting kit such as the HO7105 is needed whenever a steering hose must pass through a bulkhead or transom wall, providing a clean, secure entry point rather than routing the hose through an unsealed hole.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350068443,"sku":"TEL-HO7105","price":36.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/HO7105__35422.1722484828.500.750.jpg?v=1785329140"},{"product_id":"seastar-ho7200-field-installed-bulkhead-kit-dual-hose-stainless-steel","title":"SeaStar HO7200 Dual Hose Bulkhead Fitting Kit, Field Installed, Stainless Steel","description":"\u003cp\u003eThe SeaStar HO7200 is a field-installed bulkhead fitting kit built for hydraulic steering hose installations that require a clean, sealed pass-through at a transom or bulkhead. The kit is configured for dual hose runs, allowing both hydraulic steering hoses to pass through a single bulkhead point with a secure, leak-resistant fit. Stainless steel construction provides corrosion resistance in the marine environment, standing up to saltwater exposure and repeated tightening without the rust or pitting that can affect lower-grade fittings.\u003c\/p\u003e\u003cp\u003eBecause this kit is field installed, it is intended to be fitted at the boat during the steering hose installation or upgrade, rather than pre-mounted at the factory. This makes it a practical option for rigging a new hydraulic steering system or replacing a worn or corroded bulkhead fitting on an existing setup. The dual-hose design keeps both steering lines organized and properly supported where they cross the bulkhead, reducing chafe and helping maintain a watertight seal.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO7200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Type:\u003c\/strong\u003e Field installed bulkhead fitting kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Configuration:\u003c\/strong\u003e Dual hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Hydraulic steering hose bulkhead pass-through\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HO7200 used for?\u003c\/strong\u003e It is a bulkhead fitting kit that lets two hydraulic steering hoses pass through a boat's transom or bulkhead at a single, sealed point, part number HO7200.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO7200 a dual hose or single hose kit?\u003c\/strong\u003e The HO7200 is configured as a dual hose bulkhead kit, meaning it accommodates both hydraulic steering hoses through one fitting point rather than needing two separate single-hose fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SeaStar HO7200 made from?\u003c\/strong\u003e Stainless steel is the material used for the HO7200 bulkhead fitting kit, chosen for its resistance to corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO7200 come pre-installed or do I fit it myself?\u003c\/strong\u003e The HO7200 is a field installed kit, meaning it is designed to be fitted during hose installation at the boat rather than arriving pre-mounted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar HO7200 weigh?\u003c\/strong\u003e The HO7200 bulkhead fitting kit weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO7200 be used when upgrading an existing hydraulic steering system?\u003c\/strong\u003e Yes, because it is field installed, the HO7200 can be fitted when rigging a new hydraulic steering system or when replacing an existing bulkhead fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use a bulkhead fitting kit instead of just running hoses through a plain hole?\u003c\/strong\u003e A bulkhead fitting kit like the HO7200 provides a sealed, supported pass-through for the hoses, reducing chafe at the bulkhead and helping keep the penetration watertight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SeaStar HO7200 suitable for saltwater use?\u003c\/strong\u003e The HO7200 is made of stainless steel, which is suited to withstand saltwater exposure without the rust or pitting that can affect lower-grade metal fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO7200 kit include fittings for both hoses in one unit?\u003c\/strong\u003e Yes, the dual hose design of the HO7200 is built to handle both hydraulic steering hoses through a single bulkhead fitting kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of steering part is the HO7200?\u003c\/strong\u003e The HO7200 is a steering parts and accessories item, specifically a bulkhead fitting kit for hydraulic steering hose runs.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350101211,"sku":"TEL-HO7200","price":69.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/HO7200__83464.1722352750.500.750.jpg?v=1785329140"},{"product_id":"seastar-ho7205-field-installed-bulkhead-kit-dual-hose-plastic-marine-steering-fitting","title":"SeaStar Dual Hose Bulkhead Fitting Kit, Field Installed, Plastic - HO7205","description":"\u003cp\u003eThe SeaStar HO7205 is a field installed bulkhead fitting kit built to pass a dual hose run through a boat's transom or bulkhead in a hydraulic steering installation. The kit is molded from plastic, making it lightweight and resistant to corrosion compared to metal bulkhead fittings, which is an important consideration in the wet, salt-exposed environment around a transom penetration. Because it is a field installed design, it is intended to be fitted during hose routing rather than pre-mounted at the factory, giving installers flexibility in where the dual hose pair exits the hull or console.\u003c\/p\u003e\u003cp\u003eThis bulkhead kit is designed for dual hose hydraulic steering lines, letting both hoses pass through a single, sealed bulkhead penetration instead of requiring two separate fittings. This keeps the installation neat and helps maintain a secure, sealed pass-through point. The SeaStar HO7205 is sold under the Steering Parts \u0026amp; Accessories category and is intended for use as part of a hydraulic steering hose installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO7205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Kit Field Installed Bulkhead, Dual Hose, Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Steering Parts \u0026amp; Accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Configuration:\u003c\/strong\u003e Dual hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Field installed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HO7205 used for?\u003c\/strong\u003e The HO7205 is a field installed bulkhead fitting kit that allows a dual hose hydraulic steering line to pass through a boat's transom or bulkhead through a single, sealed fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO7205 designed for one hose or two?\u003c\/strong\u003e This kit is built for dual hose applications, so both hydraulic steering hoses pass through the bulkhead using the same fitting kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SeaStar HO7205 bulkhead kit made from?\u003c\/strong\u003e It is made of plastic, which resists corrosion in the wet, salt-exposed environment typical of a transom or bulkhead penetration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO7205 come pre-installed on a boat?\u003c\/strong\u003e No, the HO7205 is a field installed kit, meaning it is fitted on site during hose routing rather than mounted at the factory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar HO7205 weigh?\u003c\/strong\u003e The HO7205 dual hose bulkhead kit weighs 1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is the SeaStar HO7205?\u003c\/strong\u003e The HO7205 is listed under Steering Parts \u0026amp; Accessories, as it supports hydraulic steering hose installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO7205 be used for a single hose steering run?\u003c\/strong\u003e The HO7205 is configured as a dual hose bulkhead kit, so it is intended for installations where two hoses pass through the same bulkhead point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the SeaStar HO7205 kit?\u003c\/strong\u003e The HO7205 is supplied as a bulkhead fitting kit for dual hose, field installed use, made of plastic.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350133979,"sku":"TEL-HO7205","price":35.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/HO7205__50369.1722496565.500.750.jpg?v=1785329140"},{"product_id":"seastar-ho8118-stainless-steel-bulkhead-hose-kit-standard-outboard-2-x-18-ft-5-5-m-for-seastar-and-baystar-steering","title":"SeaStar Bulkhead Hose Kit, Standard, Stainless Steel, 2 x 18 Foot Hoses - HO8118","description":"\u003cp\u003eThe SeaStar HO8118 is a standard bulkhead hose kit for outboard hydraulic steering systems, sized to route two 18 foot (5.5 m) hoses cleanly through a splashwell bulkhead. The kit is designed to keep hose runs tidy behind the transom, eliminating excess loose hose while helping to prevent kinking or chafing that can wear through hose material over time. Both hoses in the kit are constructed with stainless steel, giving the assembly added durability and corrosion resistance in a marine environment. The kit is compatible with all SeaStar and BayStar steering systems, making it a straightforward fit for boats already running SeaStar or BayStar hydraulic steering. Each hose measures approximately 216 inches long and 2 inches wide, with the pair combining for 36 feet of total hose length. At 3.59 pounds, the kit includes both hoses needed to complete a standard bulkhead installation, so no additional hose purchase is required for the run. This kit is intended for boaters replacing worn steering hoses or completing a new hydraulic steering installation where a clean, chafe-resistant bulkhead pass-through is needed. SeaStar backs the kit with a two-year recreational user warranty against manufacturer defects.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO8118\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bulkhead Hose Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length (each):\u003c\/strong\u003e 18 feet (5.5 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Hoses:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Hose Length:\u003c\/strong\u003e 36 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 216 inches long x 2 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.59 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957827852\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eCompatible with all SeaStar and BayStar steering systems.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SeaStar HO8118 bulkhead hose kit?\u003c\/strong\u003e The HO8118 kit includes two 18 foot (5.5 m) stainless steel steering hoses, sized for a standard bulkhead pass-through installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the hoses in this kit?\u003c\/strong\u003e Each hose in the HO8118 kit measures 18 feet (5.5 m), for a combined total of 36 feet across the pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat steering systems is the HO8118 compatible with?\u003c\/strong\u003e This bulkhead hose kit can be used with all SeaStar and BayStar steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the hoses made from?\u003c\/strong\u003e The hoses in the HO8118 kit are constructed with stainless steel for added durability in marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the HO8118 hose kit?\u003c\/strong\u003e The HO8118 bulkhead hose kit is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit help prevent hose kinking or chafing?\u003c\/strong\u003e Yes, the HO8118 bulkhead hose kit is designed for tidy hose routing through a splashwell bulkhead, which helps eliminate excess loose hose and reduces kinking or chafing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of each hose?\u003c\/strong\u003e Each hose in the HO8118 kit measures approximately 216 inches in length and 2 inches in width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HO8118 kit weigh?\u003c\/strong\u003e The complete SeaStar HO8118 hose kit weighs 3.59 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit for a single side or both sides of a bulkhead installation?\u003c\/strong\u003e The HO8118 is a standard bulkhead hose kit that includes two hoses, used together as a set for a single bulkhead steering installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO8118 come with a warranty?\u003c\/strong\u003e SeaStar backs the HO8118 bulkhead hose kit with a two-year recreational user warranty against manufacturer defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar HO8118 kit?\u003c\/strong\u003e The UPC for the SeaStar HO8118 bulkhead hose kit is 731957827852.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350166747,"sku":"TEL-HO8118","price":286.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51U0ha25jGL.jpg?v=1784477224"},{"product_id":"seastar-hp6032-helm-service-kit-for-baystar-plus-hydraulic-steering-fits-hh4514-3-hh4513-3-hh4314-3-helms-up-to-150-hp","title":"SeaStar HP6032 Service Kit for BayStar Plus Hydraulic Steering Helms HH4514-3, HH4513-3, HH4314-3","description":"\u003cp\u003eThe SeaStar HP6032 is a service kit built for BayStar Plus hydraulic steering helms, the helm line built by the makers of SeaStar hydraulic steering for boats rated to a maximum of 150 HP. BayStar Plus combines rigid ISO quality control with precision manufacturing to bring reliable, comfortable hydraulic steering feel to smaller outboard and sterndrive boats, and the HP6032 kit lets an owner service the helm rather than replace it outright. It is designed specifically for the BayStar Plus 1.4 Front Mount helm (HH4514-3) and the BayStar Plus 1.4 Sport Tilt helms (HH4513-3 and HH4314-3), so it is matched to the internal components used in those specific helm models rather than being a generic, one-size-fits-all kit. Because it is sized for the 1.4 cubic-inch BayStar Plus helm family, it restores factory sealing and performance to helms that have seen wear from normal use. At 0.4 pounds, the kit ships light and is intended for a straightforward helm service without the cost of a full helm replacement. Confirm your helm model number against HH4514-3, HH4513-3, or HH4314-3 before ordering to ensure correct fitment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HP6032\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Helm service kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Helm Models:\u003c\/strong\u003e HH4514-3, HH4513-3, HH4314-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Steering System:\u003c\/strong\u003e BayStar Plus 1.4 hydraulic steering (Front Mount and Sport Tilt)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Horsepower Rating:\u003c\/strong\u003e 150 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957898906\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Steering Parts and Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBayStar Plus 1.4 Front Mount helm, model HH4514-3\u003c\/li\u003e\n\u003cli\u003eBayStar Plus 1.4 Sport Tilt helm, model HH4513-3\u003c\/li\u003e\n\u003cli\u003eBayStar Plus 1.4 Sport Tilt helm, model HH4314-3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HP6032 kit used for?\u003c\/strong\u003e HP6032 is a service kit for BayStar Plus hydraulic steering helms, used to service the helm rather than replace it entirely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich helm models does HP6032 fit?\u003c\/strong\u003e It is matched to the BayStar Plus 1.4 Front Mount helm (HH4514-3) and the BayStar Plus 1.4 Sport Tilt helms (HH4513-3 and HH4314-3).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit compatible with the BayStar Plus Sport Tilt helm?\u003c\/strong\u003e Yes, HP6032 is compatible with both Sport Tilt helm models HH4513-3 and HH4314-3, as well as the Front Mount helm HH4514-3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat horsepower rating is the BayStar Plus system designed for?\u003c\/strong\u003e BayStar Plus hydraulic steering, which the HP6032 service kit supports, is rated for boats up to a maximum of 150 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HP6032 service kit weigh?\u003c\/strong\u003e The SeaStar HP6032 kit weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes the HP6032 service kit?\u003c\/strong\u003e HP6032 is a SeaStar part number, and BayStar Plus steering is brought to buyers by the same manufacturer that produces SeaStar hydraulic steering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to know my helm model number before ordering HP6032?\u003c\/strong\u003e Yes, confirm your helm is HH4514-3, HH4513-3, or HH4314-3 before ordering the HP6032 kit to ensure correct fitment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan HP6032 be used on any hydraulic steering helm?\u003c\/strong\u003e No, HP6032 is specifically designed for the BayStar Plus 1.4 Front Mount and Sport Tilt helm models, not for hydraulic helms generally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HP6032 kit include tilt steering parts?\u003c\/strong\u003e It applies to the Sport Tilt helm models HH4513-3 and HH4314-3 as well as the Front Mount helm HH4514-3, covering both tilt and non-tilt BayStar Plus 1.4 configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with the HP6032 kit?\u003c\/strong\u003e The SeaStar HP6032 service kit is listed under UPC 731957898906.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350428891,"sku":"TEL-HP6032","price":14.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/HP6032__59325.1722489522.500.750.jpg?v=1785329140"},{"product_id":"seastar-hp6046-bellows-tilt-helm-cover-6-pack-for-baystar-sport-tilt-hydraulic-steering-helms","title":"SeaStar HP6046 Bellows Tilt Helm Cover, 6-Pack, for Sport Tilt Helms","description":"\u003cp\u003eThe SeaStar HP6046 is a bellows-style tilt helm cover sold as a set of 6, designed to fit new Sport Tilt helm units. The bellows cover protects the tilt mechanism of the helm from dirt, moisture, and UV exposure while allowing the helm to move freely through its tilt range. This is a replacement\/service part intended for boat owners and marine technicians maintaining Sport Tilt helm pumps as part of a hydraulic steering system. Each pack contains 6 covers, and the total weight of the pack is 1.34 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HP6046\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Helm Pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 6 covers per pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.34 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957898685\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e New Sport Tilt helms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNew Sport Tilt helm units\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HP6046?\u003c\/strong\u003e It is a bellows-style tilt helm cover sold as a set of 6, made to fit new Sport Tilt helm units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many covers come in one HP6046 pack?\u003c\/strong\u003e Each HP6046 pack includes 6 bellows tilt helm covers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the bellows cover do?\u003c\/strong\u003e It covers and protects the tilt portion of the Sport Tilt helm from dirt, moisture, and sun exposure while still allowing normal tilt movement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the HP6046 fit any tilt helm?\u003c\/strong\u003e The HP6046 is designed for new Sport Tilt helm units; it is not a universal cover for all helm styles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HP6046 pack weigh?\u003c\/strong\u003e The 6-pack of SeaStar HP6046 bellows covers weighs 1.34 pounds total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HP6046 sold individually or as a set?\u003c\/strong\u003e The HP6046 is sold as a set of 6 covers, not individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is the HP6046?\u003c\/strong\u003e The SeaStar HP6046 is listed under Helm Pumps, as it is a component used with helm pump\/tilt assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HP6046 a genuine SeaStar part?\u003c\/strong\u003e Yes, HP6046 is the SeaStar manufacturer part number for this bellows tilt helm cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the HP6046 pack?\u003c\/strong\u003e The UPC for the SeaStar HP6046 6-pack is 731957898685.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace all covers in the pack at once?\u003c\/strong\u003e The HP6046 is packaged as a set of 6, so replacement is typically done using covers from the same pack as needed for your Sport Tilt helm.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350494427,"sku":"TEL-HP6046","price":105.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/tel-hp6046__15850.1665084399.500.750.jpg?v=1785329140"},{"product_id":"seastar-hs5182-hydraulic-steering-cylinder-seal-kit-150-7-ba-std-tr-tm","title":"SeaStar Seal Kit HS5182 for Hydraulic Steering Cylinders (150-7 BA, Std, TR, TM)","description":"\u003cp\u003eThe SeaStar HS5182 is a seal kit for SeaStar hydraulic steering cylinders, covering the 150-7 BA, Std, TR, and TM cylinder types. It is designed to restore a worn or leaking steering cylinder to proper working condition, replacing the internal sealing components that keep hydraulic fluid contained and steering pressure consistent as the helm is turned. The kit is round in shape and is supplied as a genuine SeaStar part backed by a limited warranty.\u003c\/p\u003e\u003cp\u003eThis seal kit falls under SeaStar's line of hydraulic steering cylinder service parts, used to maintain smooth, leak-free operation of the steering system without replacing the entire cylinder assembly. At 0.12 pounds, it is a compact service kit sized for the seal components it contains.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HS5182\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Hydraulic Steering Cylinders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Seal Kit 150-7 BA, Std, TR, TM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.12 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957806390\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00731957806390\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HS5182 seal kit used for?\u003c\/strong\u003e It is a seal kit for SeaStar hydraulic steering cylinders, covering the 150-7 BA, Std, TR, and TM cylinder types, used to replace worn internal seals so the cylinder holds hydraulic pressure properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HS5182 seal kit weigh?\u003c\/strong\u003e The SeaStar HS5182 seal kit weighs 0.12 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HS5182 a genuine SeaStar part?\u003c\/strong\u003e Yes, the HS5182 is a genuine SeaStar part number and is backed by a limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape is the HS5182 seal kit?\u003c\/strong\u003e The HS5182 seal kit is round in shape.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SeaStar HS5182 kit?\u003c\/strong\u003e The kit is listed as Seal Kit 150-7 BA, Std, TR, TM, covering the sealing components for those SeaStar hydraulic steering cylinder variants.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar HS5182?\u003c\/strong\u003e The UPC for SeaStar part HS5182 is 731957806390.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich SeaStar cylinder types does HS5182 fit?\u003c\/strong\u003e HS5182 is designated for the 150-7 BA, Std, TR, and TM SeaStar hydraulic steering cylinder types.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HS5182 seal kit come with a warranty?\u003c\/strong\u003e Yes, SeaStar covers the HS5182 seal kit with a limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HS5182 a complete cylinder or just a seal kit?\u003c\/strong\u003e HS5182 is a seal kit only, intended to service and reseal an existing SeaStar hydraulic steering cylinder rather than replace the whole unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does the HS5182 seal kit belong to?\u003c\/strong\u003e The HS5182 is categorized under SeaStar hydraulic steering cylinder parts.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350723803,"sku":"TEL-HS5182","price":67.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/HS5182__14518.1722511870.500.750.jpg?v=1785188295"},{"product_id":"seastar-hs5161-helm-seal-kit-for-250v-75v-and-1250v-75v-steering-helm-pumps","title":"SeaStar HS5161 Seal Kit for 250V\/75V and 1250V\/75V Helm Pumps","description":"\u003cp\u003eThe SeaStar HS5161 is a seal kit engineered to service SeaStar 250V\/75V and 1250V\/75V helm pumps, restoring hydraulic steering performance when internal seals wear or begin to leak. As boats log hours on the water, the internal seals in a hydraulic helm pump are exposed to constant pressure cycling and fluid contact, and over time they can lose their sealing ability, leading to soft steering, fluid seepage, or a loss of steering feedback. The HS5161 kit provides the replacement seal components needed to rebuild the helm pump and return it to proper working order without purchasing an entirely new unit.\u003c\/p\u003e\u003cp\u003eThis kit is built for the SeaStar 250V\/75V and 1250V\/75V helm pump models specifically, so it is intended for boat owners and marine technicians performing routine maintenance or troubleshooting a steering fluid leak on these units. The kit includes one full set of components per package and is made with plastic parts sized to fit the factory helm pump housing. Because it is a direct-fit kit for these named SeaStar helm pump models, it simplifies sourcing the correct seals without guesswork.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HS5161\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Helm Pump Models:\u003c\/strong\u003e 250V\/75V, 1250V\/75V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957806307\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSeaStar 250V\/75V helm pump\u003c\/li\u003e\n\u003cli\u003eSeaStar 1250V\/75V helm pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HS5161 seal kit used for?\u003c\/strong\u003e The HS5161 is a seal kit for rebuilding SeaStar 250V\/75V and 1250V\/75V helm pumps when internal seals wear out or start leaking hydraulic fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich helm pumps does the HS5161 fit?\u003c\/strong\u003e It fits the SeaStar 250V\/75V helm pump and the SeaStar 1250V\/75V helm pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many kits do I need for one helm pump?\u003c\/strong\u003e One HS5161 kit contains one complete set of seal components, and the package quantity is one item per kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the seals made of?\u003c\/strong\u003e The seal components in the SeaStar HS5161 kit are made of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the parts in the HS5161 kit?\u003c\/strong\u003e The components included in the HS5161 seal kit are black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HS5161 seal kit weigh?\u003c\/strong\u003e The SeaStar HS5161 seal kit weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the HS5161 kit stop a steering fluid leak?\u003c\/strong\u003e Yes, replacing worn seals with the HS5161 kit is intended to restore proper sealing in a SeaStar 250V\/75V or 1250V\/75V helm pump and resolve leaks caused by seal wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HS5161 an OEM SeaStar part?\u003c\/strong\u003e Yes, HS5161 is the SeaStar manufacturer part number for this seal kit, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the HS5161 seal kit myself?\u003c\/strong\u003e The HS5161 kit is designed to rebuild the helm pump's internal seals, which is typically done by a boat owner or marine technician familiar with servicing SeaStar hydraulic steering pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the HS5161 kit box?\u003c\/strong\u003e The HS5161 package includes one seal kit for the SeaStar 250V\/75V and 1250V\/75V helm pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HS5161 kit come with a warranty?\u003c\/strong\u003e The SeaStar HS5161 seal kit is backed by a limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HS5161 kit the same for both the 250V\/75V and 1250V\/75V pumps?\u003c\/strong\u003e Yes, the SeaStar HS5161 kit is listed as compatible with both the 250V\/75V and 1250V\/75V helm pump models.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350822107,"sku":"TEL-HS5161","price":62.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/tel-hs5161_lg__96632.1558179287.500.750.jpg?v=1785188363"},{"product_id":"seastar-hs5157-front-mount-cylinder-seal-kit-fits-hc5345-hc5347-hc5348-pivot-steering-cylinders-2-seal-glands-pin-wrench-guide-tool","title":"SeaStar HS5157 Front Mount Cylinder Seal Kit for HC5340-HC5445 and HC6750-HC6755 Cylinders","description":"\u003cp\u003eThe SeaStar HS5157 is a front seal kit for SeaStar pivot and front mount hydraulic steering cylinders. It restores the sealing surfaces inside the cylinder that wear over time from normal steering use, water intrusion, and age, which can lead to hydraulic fluid leaks, spongy steering feel, or loss of steering pressure. The kit includes two metal, round seal glands, a pin wrench, and a seal gland assembly guide tool, giving an installer everything needed to remove the old glands and seat the new ones correctly without damaging the O-rings during assembly.\u003c\/p\u003e\u003cp\u003eHS5157 is designed for SeaStar front mount cylinders including the HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, and HC5445 series, as well as the HC6750 through HC6755 series. This covers threaded-end-gland cylinders, pivot cylinders (including Honda 115-130 and OMC-specific applications), and compact cylinders. A related kit, HS5167, uses the same seal glands and guide tool but ships without the pin wrench, so buyers who already own a wrench or prefer to source one separately have that option under a different part number. Always confirm the cylinder model number before ordering to be sure the correct seal kit is selected.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HS5157\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Front Mount Cylinder Seal Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 2 Seal Glands, Pin Wrench, Seal Gland Assembly Guide Tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.53 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957806277\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSeaStar front mount cylinders: HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445\u003c\/li\u003e\n\u003cli\u003eSeaStar front mount cylinders: HC6750, HC6751, HC6752, HC6753, HC6754, HC6755\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SeaStar HS5157 seal kit?\u003c\/strong\u003e HS5157 includes two seal glands, a pin wrench, and a seal gland assembly guide tool, everything needed to reseal a SeaStar front mount steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich SeaStar cylinders does HS5157 fit?\u003c\/strong\u003e HS5157 fits the HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, and HC5445 front mount cylinders, along with the HC6750 through HC6755 series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes HS5157 include a pin wrench?\u003c\/strong\u003e Yes, the pin wrench is included in HS5157. A related kit, HS5167, contains the same seal glands and guide tool but ships without the wrench.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the seal glands made of?\u003c\/strong\u003e The seal glands in the HS5157 kit are metal and round in shape, matching the OEM gland design used in SeaStar front mount cylinders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HS5157 seal kit weigh?\u003c\/strong\u003e The HS5157 front mount cylinder seal kit weighs 0.53 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HS5157 compatible with the HC5347 pivot cylinder used on Honda outboards?\u003c\/strong\u003e Yes, HS5157 is compatible with the HC5347 pivot cylinder, which is used in Honda 115-130 horsepower applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HS5157 compatible with the HC5348 pivot cylinder used on OMC outboards?\u003c\/strong\u003e Yes, HS5157 is compatible with the HC5348 pivot cylinder, an OMC-specific pivot cylinder application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan HS5157 be used on a SeaRay compact cylinder?\u003c\/strong\u003e Yes, HS5157 fits the HC5394 SeaRay compact cylinder in addition to the other listed front mount cylinder models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between HS5157 and HS5167?\u003c\/strong\u003e HS5157 and HS5167 use the same two seal glands and guide tool, but HS5157 includes a pin wrench while HS5167 ships without one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would steering feel spongy or leak fluid on a SeaStar front mount cylinder?\u003c\/strong\u003e Worn seal glands inside a SeaStar front mount cylinder like the HC5345 or HC5445 can allow hydraulic fluid to leak past, causing spongy steering or pressure loss; the HS5157 kit replaces those glands to restore proper sealing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a special tool needed to install the HS5157 seal kit?\u003c\/strong\u003e The HS5157 kit includes its own pin wrench and seal gland assembly guide tool, so no additional specialty tools are required to install the new seal glands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HS5157 a genuine SeaStar part?\u003c\/strong\u003e Yes, HS5157 is the SeaStar manufacturer part number for this front mount cylinder seal kit.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350887643,"sku":"TEL-HS5157","price":188.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/TEL-HS5157__89946.1723560147.500.750.jpg?v=1785188087"},{"product_id":"seastar-hs5201-seal-kit-for-1-inch-shaft-rear-mount-hydraulic-helm-pumps-seastar-1-4-and-1-7","title":"SeaStar Helm Pump Seal Kit, 1 Inch Shaft, HS5201 - Fits HH5279-3, HH5280-3, HH5281-3 Rear Mount Cylinders","description":"\u003cp\u003eThe SeaStar HS5201 is a 1 inch shaft seal kit for SeaStar hydraulic steering helm pump cylinders. It is the seal kit specified for the SeaStar 1.4 rear mount cylinder with a 1 inch straight shaft (HH5279-3), the SeaStar 1.4 rear mount cylinder with a 1 inch tapered shaft (HH5280-3), and the SeaStar 1.7 rear mount cylinder with a 1 inch tapered shaft (HH5281-3). Boat owners and marine technicians use this kit to restore proper sealing inside these helm pump cylinder assemblies when a steering system starts to feel spongy, loses pressure, or shows signs of hydraulic fluid seepage around the shaft. Because HS5201 is shared across three different SeaStar rear mount cylinder part numbers, it lets a shop stock a single seal kit to service multiple helm pump builds within the 1.4 and 1.7 rear mount lineup, provided the shaft is the 1 inch size. At 0.06 pounds, the kit ships and stores easily as a small parts-bin item alongside other helm pump service components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HS5201\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Helm Pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Size:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Cylinder Assemblies:\u003c\/strong\u003e HH5279-3, HH5280-3, HH5281-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957899224\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSeaStar 1.4 rear mount cylinder, 1 inch straight shaft (HH5279-3)\u003c\/li\u003e\n\u003cli\u003eSeaStar 1.4 rear mount cylinder, 1 inch tapered shaft (HH5280-3)\u003c\/li\u003e\n\u003cli\u003eSeaStar 1.7 rear mount cylinder, 1 inch tapered shaft (HH5281-3)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HS5201 seal kit used for?\u003c\/strong\u003e HS5201 is a seal kit used to reseal SeaStar hydraulic steering helm pump cylinders when the shaft seals wear out or start to leak.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich SeaStar cylinder assemblies use the HS5201 seal kit?\u003c\/strong\u003e HS5201 is the seal kit for three SeaStar rear mount cylinder assemblies: HH5279-3, HH5280-3, and HH5281-3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shaft size does the HS5201 seal kit fit?\u003c\/strong\u003e This kit is sized for a 1 inch shaft, matching the shaft diameter used on the HH5279-3, HH5280-3, and HH5281-3 cylinders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes HS5201 work with both straight and tapered shaft cylinders?\u003c\/strong\u003e Yes. It is used in the straight shaft HH5279-3 cylinder as well as the tapered shaft HH5280-3 and HH5281-3 cylinders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HS5201 for a SeaStar 1.4 or 1.7 rear mount system?\u003c\/strong\u003e Both. HH5279-3 and HH5280-3 are SeaStar 1.4 rear mount cylinders, while HH5281-3 is a SeaStar 1.7 rear mount cylinder, and all three use the HS5201 seal kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HS5201 seal kit weigh?\u003c\/strong\u003e The SeaStar HS5201 seal kit weighs 0.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar HS5201 seal kit?\u003c\/strong\u003e The UPC for HS5201 is 731957899224.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs HS5201 a genuine SeaStar part?\u003c\/strong\u003e Yes, HS5201 is the SeaStar manufacturer part number for this helm pump seal kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product category does HS5201 fall under?\u003c\/strong\u003e HS5201 is listed under Helm Pumps as a seal kit component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan HS5201 be used to rebuild a SeaStar 1.4 rear mount helm pump with a straight shaft?\u003c\/strong\u003e Yes, HS5201 is the specified seal kit for the SeaStar 1.4 rear mount cylinder with a 1 inch straight shaft, part number HH5279-3.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350953179,"sku":"TEL-HS5201","price":54.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/TEL-HS5201__77653.1558340885.500.750.jpg?v=1785329141"},{"product_id":"seastar-ht5092-nylon-hydraulic-steering-tubing-3-8-in-x-25-ft-fits-all-seastar-and-baystar-hydraulic-steering-systems","title":"SeaStar HT5092 Nylon Hydraulic Steering Tube, 3\/8 Inch x 25 Feet","description":"\u003cp\u003eThe SeaStar HT5092 is a nylon hydraulic steering tube built for building or extending SeaStar and BayStar hydraulic steering system hose runs. It measures 3\/8 inch in diameter and comes in a 25 foot length, giving installers enough material to route a full helm-to-cylinder connection or replace a worn or damaged section of steering line. The tubing is molded in black nylon, a material chosen for its resistance to hydraulic fluid, flexing, and the marine environment, so the hydraulic circuit stays sealed and responsive as the wheel is turned.\u003c\/p\u003e\u003cp\u003eThis tube is sold as bulk hydraulic tubing rather than a pre-fitted hose assembly, making it a practical option for custom installations, repairs, and helm relocations where standard pre-cut hose kit lengths do not match the run needed. It is designed to work with SeaStar and BayStar steering systems. The same tubing is also offered in longer lengths as separate part numbers for larger boats or longer helm-to-cylinder runs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HT5092\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.55 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e SeaStar and BayStar Steering Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Steering Tubing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe HT5092 nylon tube is compatible with SeaStar and BayStar hydraulic steering systems.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HT5092 used for?\u003c\/strong\u003e The HT5092 is a nylon hydraulic tube used to build or repair helm-to-cylinder hose runs in SeaStar and BayStar hydraulic steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this steering tube?\u003c\/strong\u003e It is 3\/8 inch in diameter and 25 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the HT5092 made of?\u003c\/strong\u003e It is made of black nylon, a material chosen for its resistance to hydraulic fluid and flexing in marine hydraulic steering circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HT5092 come with fittings already attached?\u003c\/strong\u003e No. The HT5092 is sold as bulk nylon tubing rather than a pre-fitted hose assembly, so fittings are installed separately during routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HT5092 weigh?\u003c\/strong\u003e The 25 foot HT5092 nylon tube weighs 1.55 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HT5092 compatible with BayStar steering?\u003c\/strong\u003e Yes, the HT5092 nylon tube is compatible with both SeaStar and BayStar hydraulic steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre longer lengths of this tubing available?\u003c\/strong\u003e Yes. The same 3\/8 inch nylon tubing is also available in 50 foot (HT5095), 75 foot (HT5097), and 100 foot (HT5100) lengths as separate part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HT5092 be used to repair a damaged steering hose instead of replacing the whole run?\u003c\/strong\u003e Yes, because it is sold as a 25 foot length of bulk 3\/8 inch nylon tubing, it can be cut to replace a damaged section of a SeaStar or BayStar steering hose run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the HT5092 tubing?\u003c\/strong\u003e The HT5092 nylon steering tube is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HT5092 a complete hose kit?\u003c\/strong\u003e No, the HT5092 is a single 25 foot length of 3\/8 inch nylon tubing rather than a complete pre-cut hose kit with bulkhead fittings.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989351117019,"sku":"TEL-HT5092","price":92.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51rpEd7cpaL.jpg?v=1784477319"},{"product_id":"seastar-ht5095-nylon-tube-3-8-x-50-for-hydraulic-steering-systems","title":"SeaStar Nylon Tube HT5095, 50 ft x 3\/8 in Hydraulic Steering Tubing","description":"\u003cp\u003eThe SeaStar Nylon Tube HT5095 is a 50 foot length of 3\/8 inch nylon tubing built for hydraulic steering line installation and replacement aboard boats using SeaStar hydraulic steering systems. Supplied as a continuous coil rather than a pre-cut kit, this tubing lets installers and repair techs cut runs to the exact length needed for a given helm-to-cylinder routing, making it a practical choice for custom installs, longer runs, or replacing sections of worn or damaged existing line.\u003c\/p\u003e\u003cp\u003eThe tube carries a polished nylon exterior, giving it a clean finished appearance where routing is visible and helping it resist the abrasion and UV exposure typical of a marine engine compartment or bilge area. Nylon hydraulic tubing of this type is valued for its rigidity, chemical resistance to hydraulic steering fluid, and consistent bore diameter, which helps maintain steering feel and system pressure over the length of the run.\u003c\/p\u003e\u003cp\u003eAt 3\/8 inch diameter, the HT5095 matches the tubing size used throughout SeaStar hydraulic steering plumbing, making it suitable for extending, repairing, or completely re-running a steering hydraulic circuit. The 50 foot length is enough material for most single- or dual-station steering installations with material to spare for fitting and routing adjustments.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HT5095\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 50 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.46 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 17.25 x 17 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957806659\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Steering Parts and Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal 3\/8 inch hydraulic steering tubing for use in SeaStar hydraulic steering system plumbing; suitable for cutting to length for a specific boat's steering line routing.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the SeaStar HT5095 nylon tube?\u003c\/strong\u003e The HT5095 is 3\/8 inch diameter nylon tubing supplied in a 50 foot length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HT5095 sold as a finished hose or as bulk tubing?\u003c\/strong\u003e It is supplied as a continuous 50 foot coil of nylon tubing, not a pre-cut hose with fittings attached, so it can be cut to the exact length needed for a steering line run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the HT5095 tube made of?\u003c\/strong\u003e The SeaStar HT5095 is made of nylon with a polished exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HT5095 weigh?\u003c\/strong\u003e The SeaStar HT5095 50 foot tube weighs 2.46 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the HT5095?\u003c\/strong\u003e The HT5095 ships in a package measuring 17.25 x 17 x 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HT5095 tubing be used for a hydraulic steering system?\u003c\/strong\u003e Yes, the HT5095 is 3\/8 inch nylon tubing intended for hydraulic steering line installation and replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to cut the HT5095 tube to length myself?\u003c\/strong\u003e Yes, since the HT5095 is supplied as a 50 foot coil, it needs to be cut to the length required for your specific steering line routing during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HT5095 tube resistant to UV and abrasion?\u003c\/strong\u003e The polished nylon construction of the HT5095 is suited to the abrasion and exposure typical of marine steering line routing in engine compartments and bilge areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar HT5095?\u003c\/strong\u003e The SeaStar HT5095 nylon tube has UPC 731957806659.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HT5095 come with any fittings included?\u003c\/strong\u003e The HT5095 is bulk nylon tubing; fittings are not included as part of this tube.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989351182555,"sku":"TEL-HT5095","price":137.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/513a_CGF_2L.jpg?v=1784477331"},{"product_id":"seastar-ht5100-nylon-tubing-3-8-x-100-for-hydraulic-steering-systems","title":"SeaStar Nylon Steering Tube 3\/8 Inch, 100 Foot Length - HT5100","description":"\u003cp\u003eThe SeaStar HT5100 is a 100 foot continuous length of nylon tubing used for hydraulic steering line installations. Supplied as one unbroken 100 foot (30.4 meter) roll, it lets installers run long steering lines without field splices or extra fittings, which keeps the hydraulic circuit cleaner and reduces potential leak points along the run. The tube has a 3\/8 inch outside diameter and a nominal wall thickness of 0.375 inches, sized for use with SeaStar hydraulic steering system tubing runs.\u003c\/p\u003e\u003cp\u003eConstructed from nylon, the tubing is built to hold up to the routing, bending, and clamping involved in a typical helm-to-cylinder steering installation. Because it ships as a single continuous length rather than pre-cut sections, it is well suited to boats needing a longer or custom-length run, or for shops that cut tubing to length for multiple installations. This is genuine SeaStar tubing, sold under the SeaStar brand.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HT5100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 0.38 inches (3\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Wall Thickness:\u003c\/strong\u003e 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Length:\u003c\/strong\u003e 100 feet (30.4 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957806673\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the SeaStar HT5100 steering tube?\u003c\/strong\u003e The HT5100 has a 3\/8 inch outside diameter with a nominal wall thickness of 0.375 inches, and is sold as one 100 foot (30.4 meter) length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is each HT5100 tube?\u003c\/strong\u003e Each HT5100 is a single continuous 100 foot (30.4 meter) length of nylon tubing, not a set of pre-cut sections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the HT5100 tubing made from?\u003c\/strong\u003e SeaStar HT5100 tubing is made from nylon, chosen for its resistance to the bending and clamping involved in hydraulic steering line routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HT5100 genuine SeaStar tubing?\u003c\/strong\u003e Yes, the HT5100 is genuine SeaStar-brand nylon steering tubing, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the HT5100 tube used for?\u003c\/strong\u003e The HT5100 is used to run hydraulic steering lines between the helm and steering cylinder, with the 100 foot length allowing longer or custom-length installations without splicing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HT5100 tube weigh?\u003c\/strong\u003e The 100 foot roll of SeaStar HT5100 nylon tubing weighs 4.03 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HT5100 come pre-cut or as a full roll?\u003c\/strong\u003e It ships as one continuous 100 foot roll of tubing rather than pre-cut lengths, so installers can cut it to the exact length needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HT5100 be cut to a shorter length for installation?\u003c\/strong\u003e Yes, since the HT5100 is supplied as a single 100 foot length of nylon tubing, it can be cut down to the specific run length required for the installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outside diameter of the HT5100 nylon tube?\u003c\/strong\u003e The outside diameter of the SeaStar HT5100 is 0.38 inches, commonly referred to as 3\/8 inch tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HT5100 tubing suitable for use with other tubing sizes in the same steering run?\u003c\/strong\u003e The HT5100 is specifically 3\/8 inch outside diameter nylon tubing; it should be matched with fittings and components sized for 3\/8 inch tubing.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989351280859,"sku":"TEL-HT5100","price":274.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41v0cHZcSJL.jpg?v=1784477337"},{"product_id":"uflex-hytech-1-1t-tilt-mount-hydraulic-outboard-steering-system-with-tube-for-engines-up-to-175-hp","title":"Uflex HYTECH 1.1T Tilt Mount Hydraulic Steering System for Outboards up to 175 HP","description":"\u003cp\u003eThe Uflex HYTECH 1.1T is a tilt mount hydraulic steering system built for outboard engines rated at 175 HP and less. As a tilt mount configuration, the helm assembly is designed to be installed with the steering tube oriented for tilt-style mounting, distinguishing it from Uflex's front mount hydraulic systems (such as the HYTECH 2.1 and HYTECH 3.1) which are built for the same horsepower range but require front mount installation. The system is supplied complete with tube, giving installers the components needed to set up hydraulic steering on a single outboard application without hunting down separate hydraulic tubing.\u003c\/p\u003e\u003cp\u003eHydraulic steering systems like the HYTECH 1.1T are used to replace mechanical (rotary or rack) steering on outboard-powered boats, giving the helm smoother, lower-effort turning and reducing feedback and kickback at the wheel, especially as engine horsepower increases. Because it is rated specifically for 175 HP and less, it is sized for the loads produced by outboards at or under that horsepower threshold rather than larger, higher-horsepower installations.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HYTECH 1.1T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Tilt Mount Low HP Steering System w\/Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Hydraulic Steering System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Tilt Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower Rating:\u003c\/strong\u003e 175 HP and less\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Hydraulic Steering Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 30.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755053026\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOutboard engines rated 175 HP and less\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Uflex HYTECH 1.1T?\u003c\/strong\u003e The HYTECH 1.1T is a tilt mount hydraulic steering system for outboard engines rated at 175 HP and less, supplied complete with a steering tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HYTECH 1.1T a front mount or tilt mount system?\u003c\/strong\u003e It is a tilt mount hydraulic steering system, which differs from Uflex's front mount hydraulic systems such as the HYTECH 2.1 and HYTECH 3.1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat horsepower range is the HYTECH 1.1T rated for?\u003c\/strong\u003e 175 HP and less is the rated horsepower range for the HYTECH 1.1T tilt mount hydraulic steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HYTECH 1.1T come with the hydraulic steering tube?\u003c\/strong\u003e Yes, the HYTECH 1.1T tilt mount system is supplied as a complete kit that includes the steering tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HYTECH 1.1T steering system weigh?\u003c\/strong\u003e The complete Uflex HYTECH 1.1T tilt mount hydraulic steering system weighs 30.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the HYTECH 1.1T and the HYTECH 2.1?\u003c\/strong\u003e Both are rated for outboards of 175 HP and less, but the HYTECH 1.1T is a tilt mount system while the HYTECH 2.1 is a front mount hydraulic system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HYTECH 1.1T be used on higher horsepower outboards?\u003c\/strong\u003e No, the HYTECH 1.1T is rated specifically for outboard engines of 175 HP and less.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of boat application is the HYTECH 1.1T designed for?\u003c\/strong\u003e It is designed for single outboard engine applications requiring tilt mount hydraulic steering, for engines up to 175 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HYTECH 1.1T a mechanical or hydraulic steering system?\u003c\/strong\u003e The HYTECH 1.1T is a hydraulic steering system, not a mechanical rotary or rack system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is the HYTECH 1.1T?\u003c\/strong\u003e The HYTECH 1.1T is classified as a hydraulic steering kit within the tilt mount low HP steering system line.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991092113627,"sku":"UFX-HYTECH 1.1T","price":1537.12,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Hytech_1.1T__65232.1722512986.500.750.jpg?v=1785329219"},{"product_id":"uflex-kitob-20-hydraulic-steering-hose-kit-two-20-ft-flexible-hoses-for-marine-outboard-steering","title":"Uflex KITOB-20' Flexible Hydraulic Steering Hose Kit, Two 20-Foot Hoses","description":"\u003cp\u003eThe Uflex KITOB-20' is a hydraulic steering hose kit that includes two flexible hoses, each 20 feet long, for use in hydraulic boat steering systems. Flexible hydraulic steering hose is used to route fluid between the helm pump and the steering cylinder, and a flexible construction allows the hose to be routed through tight bulkheads, stringers, and curved runs where rigid tubing cannot easily reach. This kit supplies both hoses needed for a complete hydraulic steering run rather than a single length, simplifying ordering for a full installation or hose replacement job. The kit weighs 3.8 pounds as packaged.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e KITOB-20'\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Two Flexible Hoses 20FT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 20 feet (each hose)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 hoses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Flexible hydraulic steering hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Hydraulic Boat Steering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755015949\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Uflex KITOB-20' kit?\u003c\/strong\u003e The KITOB-20' kit includes two flexible hydraulic steering hoses, each 20 feet long, giving you both hoses needed for a hydraulic steering run in one purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the hoses in this kit?\u003c\/strong\u003e Each of the two hoses in the Uflex KITOB-20' kit measures 20 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hoses come in the KITOB-20' kit?\u003c\/strong\u003e Two flexible hydraulic steering hoses are included, both 20 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the KITOB-20' hose kit?\u003c\/strong\u003e The Uflex KITOB-20' kit weighs 3.8 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of hose is included in this kit?\u003c\/strong\u003e The KITOB-20' kit contains flexible hydraulic steering hose, designed to route through tight or curved spaces in a boat's steering system where rigid tubing is impractical.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Uflex KITOB-20' kit?\u003c\/strong\u003e The UPC for this product is 702755015949.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of boat part is the KITOB-20' kit?\u003c\/strong\u003e This kit is listed under hydraulic boat steering, covering the hoses used in a boat's hydraulic steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the KITOB-20' hose rigid or flexible?\u003c\/strong\u003e The hoses in the Uflex KITOB-20' kit are flexible, not rigid, allowing routing around obstructions in the boat's hull or console.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to buy two separate hoses for a full hydraulic steering install?\u003c\/strong\u003e No, the Uflex KITOB-20' kit already includes both hoses (two 20-foot lengths) needed, so a single order covers the pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this hose kit?\u003c\/strong\u003e The manufacturer part number is KITOB-20', made by Uflex.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991092277467,"sku":"UFX-KITOB-20","price":178.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/u_6f0f4a6a-150c-4145-9e1d-4fe464038970.jpg?v=1785347392"},{"product_id":"uflex-kitob-16-hydraulic-steering-hose-kit-16-ft-pair-with-fittings-and-bend-restrictors-for-hyco-and-protech-black","title":"Uflex KITOB-16' Hydraulic Hose Kit, 16 Feet, for Hyco and ProTech Steering Systems, Black","description":"\u003cp\u003eThe Uflex KITOB-16' Hydraulic Hose Kit supplies a matched pair of high-pressure flexible hydraulic hoses for Hyco and ProTech hydraulic steering systems. Each hose is pre-assembled with fittings and bend restrictors on both ends, so the kit is ready to route and connect without needing to fabricate or crimp fittings on site. The bend restrictors protect the hose ends from kinking or excessive flex at the connection points, a common failure area in hydraulic steering runs that see repeated helm-to-cylinder movement. At 16 feet in length, the hoses are sized for longer steering runs from the helm pump to the outboard or sterndrive steering cylinder. The hose material is black, low-permeation construction intended for marine hydraulic steering fluid service. Uflex is a manufacturer of steering and control systems for the marine industry, and its components are used as original equipment on numerous boat brands. This kit is intended as a matched replacement pair for Hyco and ProTech hydraulic steering systems where the existing hoses have failed, are leaking, or need to be extended or replaced as part of a steering system rebuild.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e KITOB-16'\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Length:\u003c\/strong\u003e 16 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair of hoses (2 hoses per kit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnds:\u003c\/strong\u003e Preassembled fittings and bend restrictors on both ends of each hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755015925\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHyco hydraulic steering systems\u003c\/li\u003e\n\u003cli\u003eProTech hydraulic steering systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Uflex KITOB-16' kit?\u003c\/strong\u003e The KITOB-16' kit includes a pair of high-pressure flexible hydraulic hoses, each 16 feet long, with fittings and bend restrictors already assembled on both ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat steering systems does the KITOB-16' fit?\u003c\/strong\u003e This hose kit is designed for Hyco and ProTech hydraulic steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the hoses in this kit?\u003c\/strong\u003e Each of the two hoses in the KITOB-16' kit is 16 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the hoses come with fittings already installed?\u003c\/strong\u003e Yes, both hoses in the Uflex KITOB-16' kit are supplied with fittings and bend restrictors preassembled on both ends, so no additional crimping or fitting installation is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the hoses?\u003c\/strong\u003e The hoses in the KITOB-16' kit are black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the KITOB-16' hose kit weigh?\u003c\/strong\u003e The kit weighs 3.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a bend restrictor used for on these hoses?\u003c\/strong\u003e Bend restrictors are fitted at both ends of each KITOB-16' hose to prevent the hose from kinking or over-flexing right at the fitting connection, which is where hydraulic hoses are most prone to fatigue and failure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit sold as a single hose or a pair?\u003c\/strong\u003e The KITOB-16' is sold as a matched pair of two hydraulic hoses, not a single hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho manufactures this hydraulic hose kit?\u003c\/strong\u003e The KITOB-16' hose kit is manufactured by Uflex, a maker of marine steering and control systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used to extend or replace existing steering hoses?\u003c\/strong\u003e Yes, the KITOB-16' pair is intended as a replacement or extension set for the hydraulic hoses on Hyco and ProTech steering systems.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991092343003,"sku":"UFX-KITOB-16","price":174.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51aQv57TX4L_c29b626f-fd19-4326-a165-133f5bf8d10d.jpg?v=1784491392"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/u.jpg?v=1785359981","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-steering-systems-hydraulic-steering.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}